summaryrefslogtreecommitdiffstats
path: root/drivers/crypto/dpaa2_sec/hw/desc/ipsec.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/crypto/dpaa2_sec/hw/desc/ipsec.h')
-rw-r--r--drivers/crypto/dpaa2_sec/hw/desc/ipsec.h1547
1 files changed, 1547 insertions, 0 deletions
diff --git a/drivers/crypto/dpaa2_sec/hw/desc/ipsec.h b/drivers/crypto/dpaa2_sec/hw/desc/ipsec.h
new file mode 100644
index 00000000..c63d0dac
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/desc/ipsec.h
@@ -0,0 +1,1547 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DESC_IPSEC_H__
+#define __DESC_IPSEC_H__
+
+#include "hw/rta.h"
+#include "common.h"
+
+/**
+ * DOC: IPsec Shared Descriptor Constructors
+ *
+ * Shared descriptors for IPsec protocol.
+ */
+
+/* General IPSec ESP encap / decap PDB options */
+
+/**
+ * PDBOPTS_ESP_ESN - Extended sequence included
+ */
+#define PDBOPTS_ESP_ESN 0x10
+
+/**
+ * PDBOPTS_ESP_IPVSN - Process IPv6 header
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_IPVSN 0x02
+
+/**
+ * PDBOPTS_ESP_TUNNEL - Tunnel mode next-header byte
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_TUNNEL 0x01
+
+/* IPSec ESP Encap PDB options */
+
+/**
+ * PDBOPTS_ESP_UPDATE_CSUM - Update ip header checksum
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_UPDATE_CSUM 0x80
+
+/**
+ * PDBOPTS_ESP_DIFFSERV - Copy TOS/TC from inner iphdr
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_DIFFSERV 0x40
+
+/**
+ * PDBOPTS_ESP_IVSRC - IV comes from internal random gen
+ */
+#define PDBOPTS_ESP_IVSRC 0x20
+
+/**
+ * PDBOPTS_ESP_IPHDRSRC - IP header comes from PDB
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_IPHDRSRC 0x08
+
+/**
+ * PDBOPTS_ESP_INCIPHDR - Prepend IP header to output frame
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_INCIPHDR 0x04
+
+/**
+ * PDBOPTS_ESP_OIHI_MASK - Mask for Outer IP Header Included
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_OIHI_MASK 0x0c
+
+/**
+ * PDBOPTS_ESP_OIHI_PDB_INL - Prepend IP header to output frame from PDB (where
+ * it is inlined).
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_OIHI_PDB_INL 0x0c
+
+/**
+ * PDBOPTS_ESP_OIHI_PDB_REF - Prepend IP header to output frame from PDB
+ * (referenced by pointer).
+ *
+ * Vlid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_OIHI_PDB_REF 0x08
+
+/**
+ * PDBOPTS_ESP_OIHI_IF - Prepend IP header to output frame from input frame
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_OIHI_IF 0x04
+
+/**
+ * PDBOPTS_ESP_NAT - Enable RFC 3948 UDP-encapsulated-ESP
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_NAT 0x02
+
+/**
+ * PDBOPTS_ESP_NUC - Enable NAT UDP Checksum
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_NUC 0x01
+
+/* IPSec ESP Decap PDB options */
+
+/**
+ * PDBOPTS_ESP_ARS_MASK - antireplay window mask
+ */
+#define PDBOPTS_ESP_ARS_MASK 0xc0
+
+/**
+ * PDBOPTS_ESP_ARSNONE - No antireplay window
+ */
+#define PDBOPTS_ESP_ARSNONE 0x00
+
+/**
+ * PDBOPTS_ESP_ARS64 - 64-entry antireplay window
+ */
+#define PDBOPTS_ESP_ARS64 0xc0
+
+/**
+ * PDBOPTS_ESP_ARS128 - 128-entry antireplay window
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_ARS128 0x80
+
+/**
+ * PDBOPTS_ESP_ARS32 - 32-entry antireplay window
+ */
+#define PDBOPTS_ESP_ARS32 0x40
+
+/**
+ * PDBOPTS_ESP_VERIFY_CSUM - Validate ip header checksum
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_VERIFY_CSUM 0x20
+
+/**
+ * PDBOPTS_ESP_TECN - Implement RRFC6040 ECN tunneling from outer header to
+ * inner header.
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_TECN 0x20
+
+/**
+ * PDBOPTS_ESP_OUTFMT - Output only decapsulation
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_OUTFMT 0x08
+
+/**
+ * PDBOPTS_ESP_AOFL - Adjust out frame len
+ *
+ * Valid only for IPsec legacy mode and for SEC >= 5.3.
+ */
+#define PDBOPTS_ESP_AOFL 0x04
+
+/**
+ * PDBOPTS_ESP_ETU - EtherType Update
+ *
+ * Add corresponding ethertype (0x0800 for IPv4, 0x86dd for IPv6) in the output
+ * frame.
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_ETU 0x01
+
+#define PDBHMO_ESP_DECAP_SHIFT 28
+#define PDBHMO_ESP_ENCAP_SHIFT 28
+#define PDBNH_ESP_ENCAP_SHIFT 16
+#define PDBNH_ESP_ENCAP_MASK (0xff << PDBNH_ESP_ENCAP_SHIFT)
+#define PDBHDRLEN_ESP_DECAP_SHIFT 16
+#define PDBHDRLEN_MASK (0x0fff << PDBHDRLEN_ESP_DECAP_SHIFT)
+#define PDB_NH_OFFSET_SHIFT 8
+#define PDB_NH_OFFSET_MASK (0xff << PDB_NH_OFFSET_SHIFT)
+
+/**
+ * PDBHMO_ESP_DECAP_DTTL - IPsec ESP decrement TTL (IPv4) / Hop limit (IPv6)
+ * HMO option.
+ */
+#define PDBHMO_ESP_DECAP_DTTL (0x02 << PDBHMO_ESP_DECAP_SHIFT)
+
+/**
+ * PDBHMO_ESP_ENCAP_DTTL - IPsec ESP increment TTL (IPv4) / Hop limit (IPv6)
+ * HMO option.
+ */
+#define PDBHMO_ESP_ENCAP_DTTL (0x02 << PDBHMO_ESP_ENCAP_SHIFT)
+
+/**
+ * PDBHMO_ESP_DIFFSERV - (Decap) DiffServ Copy - Copy the IPv4 TOS or IPv6
+ * Traffic Class byte from the outer IP header to the
+ * inner IP header.
+ */
+#define PDBHMO_ESP_DIFFSERV (0x01 << PDBHMO_ESP_DECAP_SHIFT)
+
+/**
+ * PDBHMO_ESP_SNR - (Encap) - Sequence Number Rollover control
+ *
+ * Configures behaviour in case of SN / ESN rollover:
+ * error if SNR = 1, rollover allowed if SNR = 0.
+ * Valid only for IPsec new mode.
+ */
+#define PDBHMO_ESP_SNR (0x01 << PDBHMO_ESP_ENCAP_SHIFT)
+
+/**
+ * PDBHMO_ESP_DFBIT - (Encap) Copy DF bit - if an IPv4 tunnel mode outer IP
+ * header is coming from the PDB, copy the DF bit from the
+ * inner IP header to the outer IP header.
+ */
+#define PDBHMO_ESP_DFBIT (0x04 << PDBHMO_ESP_ENCAP_SHIFT)
+
+/**
+ * PDBHMO_ESP_DFV - (Decap) - DF bit value
+ *
+ * If ODF = 1, DF bit in output frame is replaced by DFV.
+ * Valid only from SEC Era 5 onwards.
+ */
+#define PDBHMO_ESP_DFV (0x04 << PDBHMO_ESP_DECAP_SHIFT)
+
+/**
+ * PDBHMO_ESP_ODF - (Decap) Override DF bit in IPv4 header of decapsulated
+ * output frame.
+ *
+ * If ODF = 1, DF is replaced with the value of DFV bit.
+ * Valid only from SEC Era 5 onwards.
+ */
+#define PDBHMO_ESP_ODF (0x08 << PDBHMO_ESP_DECAP_SHIFT)
+
+/**
+ * struct ipsec_encap_cbc - PDB part for IPsec CBC encapsulation
+ * @iv: 16-byte array initialization vector
+ */
+struct ipsec_encap_cbc {
+ uint8_t iv[16];
+};
+
+
+/**
+ * struct ipsec_encap_ctr - PDB part for IPsec CTR encapsulation
+ * @ctr_nonce: 4-byte array nonce
+ * @ctr_initial: initial count constant
+ * @iv: initialization vector
+ */
+struct ipsec_encap_ctr {
+ uint8_t ctr_nonce[4];
+ uint32_t ctr_initial;
+ uint64_t iv;
+};
+
+/**
+ * struct ipsec_encap_ccm - PDB part for IPsec CCM encapsulation
+ * @salt: 3-byte array salt (lower 24 bits)
+ * @ccm_opt: CCM algorithm options - MSB-LSB description:
+ * b0_flags (8b) - CCM B0; use 0x5B for 8-byte ICV, 0x6B for 12-byte ICV,
+ * 0x7B for 16-byte ICV (cf. RFC4309, RFC3610)
+ * ctr_flags (8b) - counter flags; constant equal to 0x3
+ * ctr_initial (16b) - initial count constant
+ * @iv: initialization vector
+ */
+struct ipsec_encap_ccm {
+ uint8_t salt[4];
+ uint32_t ccm_opt;
+ uint64_t iv;
+};
+
+/**
+ * struct ipsec_encap_gcm - PDB part for IPsec GCM encapsulation
+ * @salt: 3-byte array salt (lower 24 bits)
+ * @rsvd: reserved, do not use
+ * @iv: initialization vector
+ */
+struct ipsec_encap_gcm {
+ uint8_t salt[4];
+ uint32_t rsvd;
+ uint64_t iv;
+};
+
+/**
+ * struct ipsec_encap_pdb - PDB for IPsec encapsulation
+ * @options: MSB-LSB description (both for legacy and new modes)
+ * hmo (header manipulation options) - 4b
+ * reserved - 4b
+ * next header (legacy) / reserved (new) - 8b
+ * next header offset (legacy) / AOIPHO (actual outer IP header offset) - 8b
+ * option flags (depend on selected algorithm) - 8b
+ * @seq_num_ext_hi: (optional) IPsec Extended Sequence Number (ESN)
+ * @seq_num: IPsec sequence number
+ * @spi: IPsec SPI (Security Parameters Index)
+ * @ip_hdr_len: optional IP Header length (in bytes)
+ * reserved - 16b
+ * Opt. IP Hdr Len - 16b
+ * @ip_hdr: optional IP Header content (only for IPsec legacy mode)
+ */
+struct ipsec_encap_pdb {
+ uint32_t options;
+ uint32_t seq_num_ext_hi;
+ uint32_t seq_num;
+ union {
+ struct ipsec_encap_cbc cbc;
+ struct ipsec_encap_ctr ctr;
+ struct ipsec_encap_ccm ccm;
+ struct ipsec_encap_gcm gcm;
+ };
+ uint32_t spi;
+ uint32_t ip_hdr_len;
+ uint8_t ip_hdr[0];
+};
+
+static inline unsigned int
+__rta_copy_ipsec_encap_pdb(struct program *program,
+ struct ipsec_encap_pdb *pdb,
+ uint32_t algtype)
+{
+ unsigned int start_pc = program->current_pc;
+
+ __rta_out32(program, pdb->options);
+ __rta_out32(program, pdb->seq_num_ext_hi);
+ __rta_out32(program, pdb->seq_num);
+
+ switch (algtype & OP_PCL_IPSEC_CIPHER_MASK) {
+ case OP_PCL_IPSEC_DES_IV64:
+ case OP_PCL_IPSEC_DES:
+ case OP_PCL_IPSEC_3DES:
+ case OP_PCL_IPSEC_AES_CBC:
+ case OP_PCL_IPSEC_NULL:
+ rta_copy_data(program, pdb->cbc.iv, sizeof(pdb->cbc.iv));
+ break;
+
+ case OP_PCL_IPSEC_AES_CTR:
+ rta_copy_data(program, pdb->ctr.ctr_nonce,
+ sizeof(pdb->ctr.ctr_nonce));
+ __rta_out32(program, pdb->ctr.ctr_initial);
+ __rta_out64(program, true, pdb->ctr.iv);
+ break;
+
+ case OP_PCL_IPSEC_AES_CCM8:
+ case OP_PCL_IPSEC_AES_CCM12:
+ case OP_PCL_IPSEC_AES_CCM16:
+ rta_copy_data(program, pdb->ccm.salt, sizeof(pdb->ccm.salt));
+ __rta_out32(program, pdb->ccm.ccm_opt);
+ __rta_out64(program, true, pdb->ccm.iv);
+ break;
+
+ case OP_PCL_IPSEC_AES_GCM8:
+ case OP_PCL_IPSEC_AES_GCM12:
+ case OP_PCL_IPSEC_AES_GCM16:
+ case OP_PCL_IPSEC_AES_NULL_WITH_GMAC:
+ rta_copy_data(program, pdb->gcm.salt, sizeof(pdb->gcm.salt));
+ __rta_out32(program, pdb->gcm.rsvd);
+ __rta_out64(program, true, pdb->gcm.iv);
+ break;
+ }
+
+ __rta_out32(program, pdb->spi);
+ __rta_out32(program, pdb->ip_hdr_len);
+
+ return start_pc;
+}
+
+/**
+ * struct ipsec_decap_cbc - PDB part for IPsec CBC decapsulation
+ * @rsvd: reserved, do not use
+ */
+struct ipsec_decap_cbc {
+ uint32_t rsvd[2];
+};
+
+/**
+ * struct ipsec_decap_ctr - PDB part for IPsec CTR decapsulation
+ * @ctr_nonce: 4-byte array nonce
+ * @ctr_initial: initial count constant
+ */
+struct ipsec_decap_ctr {
+ uint8_t ctr_nonce[4];
+ uint32_t ctr_initial;
+};
+
+/**
+ * struct ipsec_decap_ccm - PDB part for IPsec CCM decapsulation
+ * @salt: 3-byte salt (lower 24 bits)
+ * @ccm_opt: CCM algorithm options - MSB-LSB description:
+ * b0_flags (8b) - CCM B0; use 0x5B for 8-byte ICV, 0x6B for 12-byte ICV,
+ * 0x7B for 16-byte ICV (cf. RFC4309, RFC3610)
+ * ctr_flags (8b) - counter flags; constant equal to 0x3
+ * ctr_initial (16b) - initial count constant
+ */
+struct ipsec_decap_ccm {
+ uint8_t salt[4];
+ uint32_t ccm_opt;
+};
+
+/**
+ * struct ipsec_decap_gcm - PDB part for IPsec GCN decapsulation
+ * @salt: 4-byte salt
+ * @rsvd: reserved, do not use
+ */
+struct ipsec_decap_gcm {
+ uint8_t salt[4];
+ uint32_t rsvd;
+};
+
+/**
+ * struct ipsec_decap_pdb - PDB for IPsec decapsulation
+ * @options: MSB-LSB description (both for legacy and new modes)
+ * hmo (header manipulation options) - 4b
+ * IP header length - 12b
+ * next header offset (legacy) / AOIPHO (actual outer IP header offset) - 8b
+ * option flags (depend on selected algorithm) - 8b
+ * @seq_num_ext_hi: (optional) IPsec Extended Sequence Number (ESN)
+ * @seq_num: IPsec sequence number
+ * @anti_replay: Anti-replay window; size depends on ARS (option flags);
+ * format must be Big Endian, irrespective of platform
+ */
+struct ipsec_decap_pdb {
+ uint32_t options;
+ union {
+ struct ipsec_decap_cbc cbc;
+ struct ipsec_decap_ctr ctr;
+ struct ipsec_decap_ccm ccm;
+ struct ipsec_decap_gcm gcm;
+ };
+ uint32_t seq_num_ext_hi;
+ uint32_t seq_num;
+ uint32_t anti_replay[4];
+};
+
+static inline unsigned int
+__rta_copy_ipsec_decap_pdb(struct program *program,
+ struct ipsec_decap_pdb *pdb,
+ uint32_t algtype)
+{
+ unsigned int start_pc = program->current_pc;
+ unsigned int i, ars;
+
+ __rta_out32(program, pdb->options);
+
+ switch (algtype & OP_PCL_IPSEC_CIPHER_MASK) {
+ case OP_PCL_IPSEC_DES_IV64:
+ case OP_PCL_IPSEC_DES:
+ case OP_PCL_IPSEC_3DES:
+ case OP_PCL_IPSEC_AES_CBC:
+ case OP_PCL_IPSEC_NULL:
+ __rta_out32(program, pdb->cbc.rsvd[0]);
+ __rta_out32(program, pdb->cbc.rsvd[1]);
+ break;
+
+ case OP_PCL_IPSEC_AES_CTR:
+ rta_copy_data(program, pdb->ctr.ctr_nonce,
+ sizeof(pdb->ctr.ctr_nonce));
+ __rta_out32(program, pdb->ctr.ctr_initial);
+ break;
+
+ case OP_PCL_IPSEC_AES_CCM8:
+ case OP_PCL_IPSEC_AES_CCM12:
+ case OP_PCL_IPSEC_AES_CCM16:
+ rta_copy_data(program, pdb->ccm.salt, sizeof(pdb->ccm.salt));
+ __rta_out32(program, pdb->ccm.ccm_opt);
+ break;
+
+ case OP_PCL_IPSEC_AES_GCM8:
+ case OP_PCL_IPSEC_AES_GCM12:
+ case OP_PCL_IPSEC_AES_GCM16:
+ case OP_PCL_IPSEC_AES_NULL_WITH_GMAC:
+ rta_copy_data(program, pdb->gcm.salt, sizeof(pdb->gcm.salt));
+ __rta_out32(program, pdb->gcm.rsvd);
+ break;
+ }
+
+ __rta_out32(program, pdb->seq_num_ext_hi);
+ __rta_out32(program, pdb->seq_num);
+
+ switch (pdb->options & PDBOPTS_ESP_ARS_MASK) {
+ case PDBOPTS_ESP_ARS128:
+ ars = 4;
+ break;
+ case PDBOPTS_ESP_ARS64:
+ ars = 2;
+ break;
+ case PDBOPTS_ESP_ARS32:
+ ars = 1;
+ break;
+ case PDBOPTS_ESP_ARSNONE:
+ default:
+ ars = 0;
+ break;
+ }
+
+ for (i = 0; i < ars; i++)
+ __rta_out_be32(program, pdb->anti_replay[i]);
+
+ return start_pc;
+}
+
+/**
+ * enum ipsec_icv_size - Type selectors for icv size in IPsec protocol
+ * @IPSEC_ICV_MD5_SIZE: full-length MD5 ICV
+ * @IPSEC_ICV_MD5_TRUNC_SIZE: truncated MD5 ICV
+ */
+enum ipsec_icv_size {
+ IPSEC_ICV_MD5_SIZE = 16,
+ IPSEC_ICV_MD5_TRUNC_SIZE = 12
+};
+
+/*
+ * IPSec ESP Datapath Protocol Override Register (DPOVRD)
+ */
+
+#define IPSEC_DECO_DPOVRD_USE 0x80
+
+struct ipsec_deco_dpovrd {
+ uint8_t ovrd_ecn;
+ uint8_t ip_hdr_len;
+ uint8_t nh_offset;
+ union {
+ uint8_t next_header; /* next header if encap */
+ uint8_t rsvd; /* reserved if decap */
+ };
+};
+
+struct ipsec_new_encap_deco_dpovrd {
+#define IPSEC_NEW_ENCAP_DECO_DPOVRD_USE 0x8000
+ uint16_t ovrd_ip_hdr_len; /* OVRD + outer IP header material
+ * length
+ */
+#define IPSEC_NEW_ENCAP_OIMIF 0x80
+ uint8_t oimif_aoipho; /* OIMIF + actual outer IP header
+ * offset
+ */
+ uint8_t rsvd;
+};
+
+struct ipsec_new_decap_deco_dpovrd {
+ uint8_t ovrd;
+ uint8_t aoipho_hi; /* upper nibble of actual outer IP
+ * header
+ */
+ uint16_t aoipho_lo_ip_hdr_len; /* lower nibble of actual outer IP
+ * header + outer IP header material
+ */
+};
+
+static inline void
+__gen_auth_key(struct program *program, struct alginfo *authdata)
+{
+ uint32_t dkp_protid;
+
+ switch (authdata->algtype & OP_PCL_IPSEC_AUTH_MASK) {
+ case OP_PCL_IPSEC_HMAC_MD5_96:
+ case OP_PCL_IPSEC_HMAC_MD5_128:
+ dkp_protid = OP_PCLID_DKP_MD5;
+ break;
+ case OP_PCL_IPSEC_HMAC_SHA1_96:
+ case OP_PCL_IPSEC_HMAC_SHA1_160:
+ dkp_protid = OP_PCLID_DKP_SHA1;
+ break;
+ case OP_PCL_IPSEC_HMAC_SHA2_256_128:
+ dkp_protid = OP_PCLID_DKP_SHA256;
+ break;
+ case OP_PCL_IPSEC_HMAC_SHA2_384_192:
+ dkp_protid = OP_PCLID_DKP_SHA384;
+ break;
+ case OP_PCL_IPSEC_HMAC_SHA2_512_256:
+ dkp_protid = OP_PCLID_DKP_SHA512;
+ break;
+ default:
+ KEY(program, KEY2, authdata->key_enc_flags, authdata->key,
+ authdata->keylen, INLINE_KEY(authdata));
+ return;
+ }
+
+ if (authdata->key_type == RTA_DATA_PTR)
+ DKP_PROTOCOL(program, dkp_protid, OP_PCL_DKP_SRC_PTR,
+ OP_PCL_DKP_DST_PTR, (uint16_t)authdata->keylen,
+ authdata->key, authdata->key_type);
+ else
+ DKP_PROTOCOL(program, dkp_protid, OP_PCL_DKP_SRC_IMM,
+ OP_PCL_DKP_DST_IMM, (uint16_t)authdata->keylen,
+ authdata->key, authdata->key_type);
+}
+
+/**
+ * cnstr_shdsc_ipsec_encap - IPSec ESP encapsulation protocol-level shared
+ * descriptor.
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: if true, perform descriptor byte swapping on a 4-byte boundary
+ * @pdb: pointer to the PDB to be used with this descriptor
+ * This structure will be copied inline to the descriptor under
+ * construction. No error checking will be made. Refer to the
+ * block guide for a details of the encapsulation PDB.
+ * @cipherdata: pointer to block cipher transform definitions
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ * @authdata: pointer to authentication transform definitions
+ * If an authentication key is required by the protocol:
+ * -For SEC Eras 1-5, an MDHA split key must be provided;
+ * Note that the size of the split key itself must be specified.
+ * -For SEC Eras 6+, a "normal" key must be provided; DKP (Derived
+ * Key Protocol) will be used to compute MDHA on the fly in HW.
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_ipsec_encap(uint32_t *descbuf, bool ps, bool swap,
+ struct ipsec_encap_pdb *pdb,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata)
+{
+ struct program prg;
+ struct program *p = &prg;
+
+ LABEL(keyjmp);
+ REFERENCE(pkeyjmp);
+ LABEL(hdr);
+ REFERENCE(phdr);
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ phdr = SHR_HDR(p, SHR_SERIAL, hdr, 0);
+ __rta_copy_ipsec_encap_pdb(p, pdb, cipherdata->algtype);
+ COPY_DATA(p, pdb->ip_hdr, pdb->ip_hdr_len);
+ SET_LABEL(p, hdr);
+ pkeyjmp = JUMP(p, keyjmp, LOCAL_JUMP, ALL_TRUE, BOTH|SHRD);
+ if (authdata->keylen) {
+ if (rta_sec_era < RTA_SEC_ERA_6)
+ KEY(p, MDHA_SPLIT_KEY, authdata->key_enc_flags,
+ authdata->key, authdata->keylen,
+ INLINE_KEY(authdata));
+ else
+ __gen_auth_key(p, authdata);
+ }
+ if (cipherdata->keylen)
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ SET_LABEL(p, keyjmp);
+ PROTOCOL(p, OP_TYPE_ENCAP_PROTOCOL,
+ OP_PCLID_IPSEC,
+ (uint16_t)(cipherdata->algtype | authdata->algtype));
+ PATCH_JUMP(p, pkeyjmp, keyjmp);
+ PATCH_HDR(p, phdr, hdr);
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * cnstr_shdsc_ipsec_decap - IPSec ESP decapsulation protocol-level shared
+ * descriptor.
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: if true, perform descriptor byte swapping on a 4-byte boundary
+ * @pdb: pointer to the PDB to be used with this descriptor
+ * This structure will be copied inline to the descriptor under
+ * construction. No error checking will be made. Refer to the
+ * block guide for details about the decapsulation PDB.
+ * @cipherdata: pointer to block cipher transform definitions.
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ * @authdata: pointer to authentication transform definitions
+ * If an authentication key is required by the protocol:
+ * -For SEC Eras 1-5, an MDHA split key must be provided;
+ * Note that the size of the split key itself must be specified.
+ * -For SEC Eras 6+, a "normal" key must be provided; DKP (Derived
+ * Key Protocol) will be used to compute MDHA on the fly in HW.
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_ipsec_decap(uint32_t *descbuf, bool ps, bool swap,
+ struct ipsec_decap_pdb *pdb,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata)
+{
+ struct program prg;
+ struct program *p = &prg;
+
+ LABEL(keyjmp);
+ REFERENCE(pkeyjmp);
+ LABEL(hdr);
+ REFERENCE(phdr);
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ phdr = SHR_HDR(p, SHR_SERIAL, hdr, 0);
+ __rta_copy_ipsec_decap_pdb(p, pdb, cipherdata->algtype);
+ SET_LABEL(p, hdr);
+ pkeyjmp = JUMP(p, keyjmp, LOCAL_JUMP, ALL_TRUE, BOTH|SHRD);
+ if (authdata->keylen) {
+ if (rta_sec_era < RTA_SEC_ERA_6)
+ KEY(p, MDHA_SPLIT_KEY, authdata->key_enc_flags,
+ authdata->key, authdata->keylen,
+ INLINE_KEY(authdata));
+ else
+ __gen_auth_key(p, authdata);
+ }
+ if (cipherdata->keylen)
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ SET_LABEL(p, keyjmp);
+ PROTOCOL(p, OP_TYPE_DECAP_PROTOCOL,
+ OP_PCLID_IPSEC,
+ (uint16_t)(cipherdata->algtype | authdata->algtype));
+ PATCH_JUMP(p, pkeyjmp, keyjmp);
+ PATCH_HDR(p, phdr, hdr);
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * cnstr_shdsc_ipsec_encap_des_aes_xcbc - IPSec DES-CBC/3DES-CBC and
+ * AES-XCBC-MAC-96 ESP encapsulation shared descriptor.
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @pdb: pointer to the PDB to be used with this descriptor
+ * This structure will be copied inline to the descriptor under
+ * construction. No error checking will be made. Refer to the
+ * block guide for a details of the encapsulation PDB.
+ * @cipherdata: pointer to block cipher transform definitions
+ * Valid algorithm values - OP_PCL_IPSEC_DES, OP_PCL_IPSEC_3DES.
+ * @authdata: pointer to authentication transform definitions
+ * Valid algorithm value: OP_PCL_IPSEC_AES_XCBC_MAC_96.
+ *
+ * Supported only for platforms with 32-bit address pointers and SEC ERA 4 or
+ * higher. The tunnel/transport mode of the IPsec ESP is supported only if the
+ * Outer/Transport IP Header is present in the encapsulation output packet.
+ * The descriptor performs DES-CBC/3DES-CBC & HMAC-MD5-96 and then rereads
+ * the input packet to do the AES-XCBC-MAC-96 calculation and to overwrite
+ * the MD5 ICV.
+ * The descriptor uses all the benefits of the built-in protocol by computing
+ * the IPsec ESP with a hardware supported algorithms combination
+ * (DES-CBC/3DES-CBC & HMAC-MD5-96). The HMAC-MD5 authentication algorithm
+ * was chosen in order to speed up the computational time for this intermediate
+ * step.
+ * Warning: The user must allocate at least 32 bytes for the authentication key
+ * (in order to use it also with HMAC-MD5-96),even when using a shorter key
+ * for the AES-XCBC-MAC-96.
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_ipsec_encap_des_aes_xcbc(uint32_t *descbuf,
+ struct ipsec_encap_pdb *pdb,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata)
+{
+ struct program prg;
+ struct program *p = &prg;
+
+ LABEL(hdr);
+ LABEL(shd_ptr);
+ LABEL(keyjump);
+ LABEL(outptr);
+ LABEL(swapped_seqin_fields);
+ LABEL(swapped_seqin_ptr);
+ REFERENCE(phdr);
+ REFERENCE(pkeyjump);
+ REFERENCE(move_outlen);
+ REFERENCE(move_seqout_ptr);
+ REFERENCE(swapped_seqin_ptr_jump);
+ REFERENCE(write_swapped_seqin_ptr);
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ phdr = SHR_HDR(p, SHR_SERIAL, hdr, 0);
+ __rta_copy_ipsec_encap_pdb(p, pdb, cipherdata->algtype);
+ COPY_DATA(p, pdb->ip_hdr, pdb->ip_hdr_len);
+ SET_LABEL(p, hdr);
+ pkeyjump = JUMP(p, keyjump, LOCAL_JUMP, ALL_TRUE, SHRD | SELF);
+ /*
+ * Hard-coded KEY arguments. The descriptor uses all the benefits of
+ * the built-in protocol by computing the IPsec ESP with a hardware
+ * supported algorithms combination (DES-CBC/3DES-CBC & HMAC-MD5-96).
+ * The HMAC-MD5 authentication algorithm was chosen with
+ * the keys options from below in order to speed up the computational
+ * time for this intermediate step.
+ * Warning: The user must allocate at least 32 bytes for
+ * the authentication key (in order to use it also with HMAC-MD5-96),
+ * even when using a shorter key for the AES-XCBC-MAC-96.
+ */
+ KEY(p, MDHA_SPLIT_KEY, 0, authdata->key, 32, INLINE_KEY(authdata));
+ SET_LABEL(p, keyjump);
+ LOAD(p, LDST_SRCDST_WORD_CLRW | CLRW_CLR_C1MODE | CLRW_CLR_C1DATAS |
+ CLRW_CLR_C1CTX | CLRW_CLR_C1KEY | CLRW_RESET_CLS1_CHA, CLRW, 0, 4,
+ IMMED);
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ PROTOCOL(p, OP_TYPE_ENCAP_PROTOCOL, OP_PCLID_IPSEC,
+ (uint16_t)(cipherdata->algtype | OP_PCL_IPSEC_HMAC_MD5_96));
+ /* Swap SEQINPTR to SEQOUTPTR. */
+ move_seqout_ptr = MOVE(p, DESCBUF, 0, MATH1, 0, 16, WAITCOMP | IMMED);
+ MATHB(p, MATH1, AND, ~(CMD_SEQ_IN_PTR ^ CMD_SEQ_OUT_PTR), MATH1,
+ 8, IFB | IMMED2);
+/*
+ * TODO: RTA currently doesn't support creating a LOAD command
+ * with another command as IMM.
+ * To be changed when proper support is added in RTA.
+ */
+ LOAD(p, 0xa00000e5, MATH3, 4, 4, IMMED);
+ MATHB(p, MATH3, SHLD, MATH3, MATH3, 8, 0);
+ write_swapped_seqin_ptr = MOVE(p, MATH1, 0, DESCBUF, 0, 20, WAITCOMP |
+ IMMED);
+ swapped_seqin_ptr_jump = JUMP(p, swapped_seqin_ptr, LOCAL_JUMP,
+ ALL_TRUE, 0);
+ LOAD(p, LDST_SRCDST_WORD_CLRW | CLRW_CLR_C1MODE | CLRW_CLR_C1DATAS |
+ CLRW_CLR_C1CTX | CLRW_CLR_C1KEY | CLRW_RESET_CLS1_CHA, CLRW, 0, 4,
+ 0);
+ SEQOUTPTR(p, 0, 65535, RTO);
+ move_outlen = MOVE(p, DESCBUF, 0, MATH0, 4, 8, WAITCOMP | IMMED);
+ MATHB(p, MATH0, SUB,
+ (uint64_t)(pdb->ip_hdr_len + IPSEC_ICV_MD5_TRUNC_SIZE),
+ VSEQINSZ, 4, IMMED2);
+ MATHB(p, MATH0, SUB, IPSEC_ICV_MD5_TRUNC_SIZE, VSEQOUTSZ, 4, IMMED2);
+ KEY(p, KEY1, authdata->key_enc_flags, authdata->key, authdata->keylen,
+ 0);
+ ALG_OPERATION(p, OP_ALG_ALGSEL_AES, OP_ALG_AAI_XCBC_MAC,
+ OP_ALG_AS_INITFINAL, ICV_CHECK_DISABLE, DIR_ENC);
+ SEQFIFOLOAD(p, SKIP, pdb->ip_hdr_len, 0);
+ SEQFIFOLOAD(p, MSG1, 0, VLF | FLUSH1 | LAST1);
+ SEQFIFOSTORE(p, SKIP, 0, 0, VLF);
+ SEQSTORE(p, CONTEXT1, 0, IPSEC_ICV_MD5_TRUNC_SIZE, 0);
+/*
+ * TODO: RTA currently doesn't support adding labels in or after Job Descriptor.
+ * To be changed when proper support is added in RTA.
+ */
+ /* Label the Shared Descriptor Pointer */
+ SET_LABEL(p, shd_ptr);
+ shd_ptr += 1;
+ /* Label the Output Pointer */
+ SET_LABEL(p, outptr);
+ outptr += 3;
+ /* Label the first word after JD */
+ SET_LABEL(p, swapped_seqin_fields);
+ swapped_seqin_fields += 8;
+ /* Label the second word after JD */
+ SET_LABEL(p, swapped_seqin_ptr);
+ swapped_seqin_ptr += 9;
+
+ PATCH_HDR(p, phdr, hdr);
+ PATCH_JUMP(p, pkeyjump, keyjump);
+ PATCH_JUMP(p, swapped_seqin_ptr_jump, swapped_seqin_ptr);
+ PATCH_MOVE(p, move_outlen, outptr);
+ PATCH_MOVE(p, move_seqout_ptr, shd_ptr);
+ PATCH_MOVE(p, write_swapped_seqin_ptr, swapped_seqin_fields);
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * cnstr_shdsc_ipsec_decap_des_aes_xcbc - IPSec DES-CBC/3DES-CBC and
+ * AES-XCBC-MAC-96 ESP decapsulation shared descriptor.
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @pdb: pointer to the PDB to be used with this descriptor
+ * This structure will be copied inline to the descriptor under
+ * construction. No error checking will be made. Refer to the
+ * block guide for a details of the encapsulation PDB.
+ * @cipherdata: pointer to block cipher transform definitions
+ * Valid algorithm values - OP_PCL_IPSEC_DES, OP_PCL_IPSEC_3DES.
+ * @authdata: pointer to authentication transform definitions
+ * Valid algorithm value: OP_PCL_IPSEC_AES_XCBC_MAC_96.
+ *
+ * Supported only for platforms with 32-bit address pointers and SEC ERA 4 or
+ * higher. The tunnel/transport mode of the IPsec ESP is supported only if the
+ * Outer/Transport IP Header is present in the decapsulation input packet.
+ * The descriptor computes the AES-XCBC-MAC-96 to check if the received ICV
+ * is correct, rereads the input packet to compute the MD5 ICV, overwrites
+ * the XCBC ICV, and then sends the modified input packet to the
+ * DES-CBC/3DES-CBC & HMAC-MD5-96 IPsec.
+ * The descriptor uses all the benefits of the built-in protocol by computing
+ * the IPsec ESP with a hardware supported algorithms combination
+ * (DES-CBC/3DES-CBC & HMAC-MD5-96). The HMAC-MD5 authentication algorithm
+ * was chosen in order to speed up the computational time for this intermediate
+ * step.
+ * Warning: The user must allocate at least 32 bytes for the authentication key
+ * (in order to use it also with HMAC-MD5-96),even when using a shorter key
+ * for the AES-XCBC-MAC-96.
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_ipsec_decap_des_aes_xcbc(uint32_t *descbuf,
+ struct ipsec_decap_pdb *pdb,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata)
+{
+ struct program prg;
+ struct program *p = &prg;
+ uint32_t ip_hdr_len = (pdb->options & PDBHDRLEN_MASK) >>
+ PDBHDRLEN_ESP_DECAP_SHIFT;
+
+ LABEL(hdr);
+ LABEL(jump_cmd);
+ LABEL(keyjump);
+ LABEL(outlen);
+ LABEL(seqin_ptr);
+ LABEL(seqout_ptr);
+ LABEL(swapped_seqout_fields);
+ LABEL(swapped_seqout_ptr);
+ REFERENCE(seqout_ptr_jump);
+ REFERENCE(phdr);
+ REFERENCE(pkeyjump);
+ REFERENCE(move_jump);
+ REFERENCE(move_jump_back);
+ REFERENCE(move_seqin_ptr);
+ REFERENCE(swapped_seqout_ptr_jump);
+ REFERENCE(write_swapped_seqout_ptr);
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ phdr = SHR_HDR(p, SHR_SERIAL, hdr, 0);
+ __rta_copy_ipsec_decap_pdb(p, pdb, cipherdata->algtype);
+ SET_LABEL(p, hdr);
+ pkeyjump = JUMP(p, keyjump, LOCAL_JUMP, ALL_TRUE, SHRD | SELF);
+ /*
+ * Hard-coded KEY arguments. The descriptor uses all the benefits of
+ * the built-in protocol by computing the IPsec ESP with a hardware
+ * supported algorithms combination (DES-CBC/3DES-CBC & HMAC-MD5-96).
+ * The HMAC-MD5 authentication algorithm was chosen with
+ * the keys options from bellow in order to speed up the computational
+ * time for this intermediate step.
+ * Warning: The user must allocate at least 32 bytes for
+ * the authentication key (in order to use it also with HMAC-MD5-96),
+ * even when using a shorter key for the AES-XCBC-MAC-96.
+ */
+ KEY(p, MDHA_SPLIT_KEY, 0, authdata->key, 32, INLINE_KEY(authdata));
+ SET_LABEL(p, keyjump);
+ LOAD(p, LDST_SRCDST_WORD_CLRW | CLRW_CLR_C1MODE | CLRW_CLR_C1DATAS |
+ CLRW_CLR_C1CTX | CLRW_CLR_C1KEY | CLRW_RESET_CLS1_CHA, CLRW, 0, 4,
+ 0);
+ KEY(p, KEY1, authdata->key_enc_flags, authdata->key, authdata->keylen,
+ INLINE_KEY(authdata));
+ MATHB(p, SEQINSZ, SUB,
+ (uint64_t)(ip_hdr_len + IPSEC_ICV_MD5_TRUNC_SIZE), MATH0, 4,
+ IMMED2);
+ MATHB(p, MATH0, SUB, ZERO, VSEQINSZ, 4, 0);
+ ALG_OPERATION(p, OP_ALG_ALGSEL_MD5, OP_ALG_AAI_HMAC_PRECOMP,
+ OP_ALG_AS_INITFINAL, ICV_CHECK_DISABLE, DIR_ENC);
+ ALG_OPERATION(p, OP_ALG_ALGSEL_AES, OP_ALG_AAI_XCBC_MAC,
+ OP_ALG_AS_INITFINAL, ICV_CHECK_ENABLE, DIR_DEC);
+ SEQFIFOLOAD(p, SKIP, ip_hdr_len, 0);
+ SEQFIFOLOAD(p, MSG1, 0, VLF | FLUSH1);
+ SEQFIFOLOAD(p, ICV1, IPSEC_ICV_MD5_TRUNC_SIZE, FLUSH1 | LAST1);
+ /* Swap SEQOUTPTR to SEQINPTR. */
+ move_seqin_ptr = MOVE(p, DESCBUF, 0, MATH1, 0, 16, WAITCOMP | IMMED);
+ MATHB(p, MATH1, OR, CMD_SEQ_IN_PTR ^ CMD_SEQ_OUT_PTR, MATH1, 8,
+ IFB | IMMED2);
+/*
+ * TODO: RTA currently doesn't support creating a LOAD command
+ * with another command as IMM.
+ * To be changed when proper support is added in RTA.
+ */
+ LOAD(p, 0xA00000e1, MATH3, 4, 4, IMMED);
+ MATHB(p, MATH3, SHLD, MATH3, MATH3, 8, 0);
+ write_swapped_seqout_ptr = MOVE(p, MATH1, 0, DESCBUF, 0, 20, WAITCOMP |
+ IMMED);
+ swapped_seqout_ptr_jump = JUMP(p, swapped_seqout_ptr, LOCAL_JUMP,
+ ALL_TRUE, 0);
+/*
+ * TODO: To be changed when proper support is added in RTA (can't load
+ * a command that is also written by RTA).
+ * Change when proper RTA support is added.
+ */
+ SET_LABEL(p, jump_cmd);
+ WORD(p, 0xA00000f3);
+ SEQINPTR(p, 0, 65535, RTO);
+ MATHB(p, MATH0, SUB, ZERO, VSEQINSZ, 4, 0);
+ MATHB(p, MATH0, ADD, ip_hdr_len, VSEQOUTSZ, 4, IMMED2);
+ move_jump = MOVE(p, DESCBUF, 0, OFIFO, 0, 8, WAITCOMP | IMMED);
+ move_jump_back = MOVE(p, OFIFO, 0, DESCBUF, 0, 8, IMMED);
+ SEQFIFOLOAD(p, SKIP, ip_hdr_len, 0);
+ SEQFIFOLOAD(p, MSG2, 0, VLF | LAST2);
+ SEQFIFOSTORE(p, SKIP, 0, 0, VLF);
+ SEQSTORE(p, CONTEXT2, 0, IPSEC_ICV_MD5_TRUNC_SIZE, 0);
+ seqout_ptr_jump = JUMP(p, seqout_ptr, LOCAL_JUMP, ALL_TRUE, CALM);
+
+ LOAD(p, LDST_SRCDST_WORD_CLRW | CLRW_CLR_C1MODE | CLRW_CLR_C1DATAS |
+ CLRW_CLR_C1CTX | CLRW_CLR_C1KEY | CLRW_CLR_C2MODE |
+ CLRW_CLR_C2DATAS | CLRW_CLR_C2CTX | CLRW_RESET_CLS1_CHA, CLRW, 0,
+ 4, 0);
+ SEQINPTR(p, 0, 65535, RTO);
+ MATHB(p, MATH0, ADD,
+ (uint64_t)(ip_hdr_len + IPSEC_ICV_MD5_TRUNC_SIZE), SEQINSZ, 4,
+ IMMED2);
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ PROTOCOL(p, OP_TYPE_DECAP_PROTOCOL, OP_PCLID_IPSEC,
+ (uint16_t)(cipherdata->algtype | OP_PCL_IPSEC_HMAC_MD5_96));
+/*
+ * TODO: RTA currently doesn't support adding labels in or after Job Descriptor.
+ * To be changed when proper support is added in RTA.
+ */
+ /* Label the SEQ OUT PTR */
+ SET_LABEL(p, seqout_ptr);
+ seqout_ptr += 2;
+ /* Label the Output Length */
+ SET_LABEL(p, outlen);
+ outlen += 4;
+ /* Label the SEQ IN PTR */
+ SET_LABEL(p, seqin_ptr);
+ seqin_ptr += 5;
+ /* Label the first word after JD */
+ SET_LABEL(p, swapped_seqout_fields);
+ swapped_seqout_fields += 8;
+ /* Label the second word after JD */
+ SET_LABEL(p, swapped_seqout_ptr);
+ swapped_seqout_ptr += 9;
+
+ PATCH_HDR(p, phdr, hdr);
+ PATCH_JUMP(p, pkeyjump, keyjump);
+ PATCH_JUMP(p, seqout_ptr_jump, seqout_ptr);
+ PATCH_JUMP(p, swapped_seqout_ptr_jump, swapped_seqout_ptr);
+ PATCH_MOVE(p, move_jump, jump_cmd);
+ PATCH_MOVE(p, move_jump_back, seqin_ptr);
+ PATCH_MOVE(p, move_seqin_ptr, outlen);
+ PATCH_MOVE(p, write_swapped_seqout_ptr, swapped_seqout_fields);
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * IPSEC_NEW_ENC_BASE_DESC_LEN - IPsec new mode encap shared descriptor length
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether Outer IP Header and/or keys can be inlined or
+ * not. To be used as first parameter of rta_inline_query().
+ */
+#define IPSEC_NEW_ENC_BASE_DESC_LEN (5 * CAAM_CMD_SZ + \
+ sizeof(struct ipsec_encap_pdb))
+
+/**
+ * IPSEC_NEW_NULL_ENC_BASE_DESC_LEN - IPsec new mode encap shared descriptor
+ * length for the case of
+ * NULL encryption / authentication
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether Outer IP Header and/or key can be inlined or
+ * not. To be used as first parameter of rta_inline_query().
+ */
+#define IPSEC_NEW_NULL_ENC_BASE_DESC_LEN (4 * CAAM_CMD_SZ + \
+ sizeof(struct ipsec_encap_pdb))
+
+/**
+ * cnstr_shdsc_ipsec_new_encap - IPSec new mode ESP encapsulation
+ * protocol-level shared descriptor.
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: must be true when core endianness doesn't match SEC endianness
+ * @pdb: pointer to the PDB to be used with this descriptor
+ * This structure will be copied inline to the descriptor under
+ * construction. No error checking will be made. Refer to the
+ * block guide for details about the encapsulation PDB.
+ * @opt_ip_hdr: pointer to Optional IP Header
+ * -if OIHI = PDBOPTS_ESP_OIHI_PDB_INL, opt_ip_hdr points to the buffer to
+ * be inlined in the PDB. Number of bytes (buffer size) copied is provided
+ * in pdb->ip_hdr_len.
+ * -if OIHI = PDBOPTS_ESP_OIHI_PDB_REF, opt_ip_hdr points to the address of
+ * the Optional IP Header. The address will be inlined in the PDB verbatim.
+ * -for other values of OIHI options field, opt_ip_hdr is not used.
+ * @cipherdata: pointer to block cipher transform definitions
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ * @authdata: pointer to authentication transform definitions.
+ * If an authentication key is required by the protocol, a "normal"
+ * key must be provided; DKP (Derived Key Protocol) will be used to
+ * compute MDHA on the fly in HW.
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_ipsec_new_encap(uint32_t *descbuf, bool ps,
+ bool swap,
+ struct ipsec_encap_pdb *pdb,
+ uint8_t *opt_ip_hdr,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata)
+{
+ struct program prg;
+ struct program *p = &prg;
+
+ LABEL(keyjmp);
+ REFERENCE(pkeyjmp);
+ LABEL(hdr);
+ REFERENCE(phdr);
+
+ if (rta_sec_era < RTA_SEC_ERA_8) {
+ pr_err("IPsec new mode encap: available only for Era %d or above\n",
+ USER_SEC_ERA(RTA_SEC_ERA_8));
+ return -ENOTSUP;
+ }
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ phdr = SHR_HDR(p, SHR_SERIAL, hdr, 0);
+
+ __rta_copy_ipsec_encap_pdb(p, pdb, cipherdata->algtype);
+
+ switch (pdb->options & PDBOPTS_ESP_OIHI_MASK) {
+ case PDBOPTS_ESP_OIHI_PDB_INL:
+ COPY_DATA(p, opt_ip_hdr, pdb->ip_hdr_len);
+ break;
+ case PDBOPTS_ESP_OIHI_PDB_REF:
+ if (ps)
+ COPY_DATA(p, opt_ip_hdr, 8);
+ else
+ COPY_DATA(p, opt_ip_hdr, 4);
+ break;
+ default:
+ break;
+ }
+ SET_LABEL(p, hdr);
+
+ pkeyjmp = JUMP(p, keyjmp, LOCAL_JUMP, ALL_TRUE, SHRD);
+ if (authdata->keylen)
+ __gen_auth_key(p, authdata);
+ if (cipherdata->keylen)
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ SET_LABEL(p, keyjmp);
+ PROTOCOL(p, OP_TYPE_ENCAP_PROTOCOL,
+ OP_PCLID_IPSEC_NEW,
+ (uint16_t)(cipherdata->algtype | authdata->algtype));
+ PATCH_JUMP(p, pkeyjmp, keyjmp);
+ PATCH_HDR(p, phdr, hdr);
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * IPSEC_NEW_DEC_BASE_DESC_LEN - IPsec new mode decap shared descriptor length
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether keys can be inlined or not. To be used as first
+ * parameter of rta_inline_query().
+ */
+#define IPSEC_NEW_DEC_BASE_DESC_LEN (5 * CAAM_CMD_SZ + \
+ sizeof(struct ipsec_decap_pdb))
+
+/**
+ * IPSEC_NEW_NULL_DEC_BASE_DESC_LEN - IPsec new mode decap shared descriptor
+ * length for the case of
+ * NULL decryption / authentication
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether key can be inlined or not. To be used as first
+ * parameter of rta_inline_query().
+ */
+#define IPSEC_NEW_NULL_DEC_BASE_DESC_LEN (4 * CAAM_CMD_SZ + \
+ sizeof(struct ipsec_decap_pdb))
+
+/**
+ * cnstr_shdsc_ipsec_new_decap - IPSec new mode ESP decapsulation protocol-level
+ * shared descriptor.
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: must be true when core endianness doesn't match SEC endianness
+ * @pdb: pointer to the PDB to be used with this descriptor
+ * This structure will be copied inline to the descriptor under
+ * construction. No error checking will be made. Refer to the
+ * block guide for details about the decapsulation PDB.
+ * @cipherdata: pointer to block cipher transform definitions
+ * Valid algorithm values 0 one of OP_PCL_IPSEC_*
+ * @authdata: pointer to authentication transform definitions.
+ * If an authentication key is required by the protocol, a "normal"
+ * key must be provided; DKP (Derived Key Protocol) will be used to
+ * compute MDHA on the fly in HW.
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_ipsec_new_decap(uint32_t *descbuf, bool ps,
+ bool swap,
+ struct ipsec_decap_pdb *pdb,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata)
+{
+ struct program prg;
+ struct program *p = &prg;
+
+ LABEL(keyjmp);
+ REFERENCE(pkeyjmp);
+ LABEL(hdr);
+ REFERENCE(phdr);
+
+ if (rta_sec_era < RTA_SEC_ERA_8) {
+ pr_err("IPsec new mode decap: available only for Era %d or above\n",
+ USER_SEC_ERA(RTA_SEC_ERA_8));
+ return -ENOTSUP;
+ }
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ phdr = SHR_HDR(p, SHR_SERIAL, hdr, 0);
+ __rta_copy_ipsec_decap_pdb(p, pdb, cipherdata->algtype);
+ SET_LABEL(p, hdr);
+ pkeyjmp = JUMP(p, keyjmp, LOCAL_JUMP, ALL_TRUE, SHRD);
+ if (authdata->keylen)
+ __gen_auth_key(p, authdata);
+ if (cipherdata->keylen)
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ SET_LABEL(p, keyjmp);
+ PROTOCOL(p, OP_TYPE_DECAP_PROTOCOL,
+ OP_PCLID_IPSEC_NEW,
+ (uint16_t)(cipherdata->algtype | authdata->algtype));
+ PATCH_JUMP(p, pkeyjmp, keyjmp);
+ PATCH_HDR(p, phdr, hdr);
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * IPSEC_AUTH_VAR_BASE_DESC_LEN - IPsec encap/decap shared descriptor length
+ * for the case of variable-length authentication
+ * only data.
+ * Note: Only for SoCs with SEC_ERA >= 3.
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether keys can be inlined or not. To be used as first
+ * parameter of rta_inline_query().
+ */
+#define IPSEC_AUTH_VAR_BASE_DESC_LEN (27 * CAAM_CMD_SZ)
+
+/**
+ * IPSEC_AUTH_VAR_AES_DEC_BASE_DESC_LEN - IPsec AES decap shared descriptor
+ * length for variable-length authentication only
+ * data.
+ * Note: Only for SoCs with SEC_ERA >= 3.
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether key can be inlined or not. To be used as first
+ * parameter of rta_inline_query().
+ */
+#define IPSEC_AUTH_VAR_AES_DEC_BASE_DESC_LEN \
+ (IPSEC_AUTH_VAR_BASE_DESC_LEN + CAAM_CMD_SZ)
+
+/**
+ * IPSEC_AUTH_BASE_DESC_LEN - IPsec encap/decap shared descriptor length
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether key can be inlined or not. To be used as first
+ * parameter of rta_inline_query().
+ */
+#define IPSEC_AUTH_BASE_DESC_LEN (19 * CAAM_CMD_SZ)
+
+/**
+ * IPSEC_AUTH_AES_DEC_BASE_DESC_LEN - IPsec AES decap shared descriptor length
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether key can be inlined or not. To be used as first
+ * parameter of rta_inline_query().
+ */
+#define IPSEC_AUTH_AES_DEC_BASE_DESC_LEN (IPSEC_AUTH_BASE_DESC_LEN + \
+ CAAM_CMD_SZ)
+
+/**
+ * cnstr_shdsc_authenc - authenc-like descriptor
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: if true, perform descriptor byte swapping on a 4-byte boundary
+ * @cipherdata: ointer to block cipher transform definitions.
+ * Valid algorithm values one of OP_ALG_ALGSEL_* {DES, 3DES, AES}
+ * @authdata: pointer to authentication transform definitions.
+ * Valid algorithm values - one of OP_ALG_ALGSEL_* {MD5, SHA1,
+ * SHA224, SHA256, SHA384, SHA512}
+ * Note: The key for authentication is supposed to be given as plain text.
+ * Note: There's no support for keys longer than the block size of the
+ * underlying hash function, according to the selected algorithm.
+ *
+ * @ivlen: length of the IV to be read from the input frame, before any data
+ * to be processed
+ * @auth_only_len: length of the data to be authenticated-only (commonly IP
+ * header, IV, Sequence number and SPI)
+ * Note: Extended Sequence Number processing is NOT supported
+ *
+ * @trunc_len: the length of the ICV to be written to the output frame. If 0,
+ * then the corresponding length of the digest, according to the
+ * selected algorithm shall be used.
+ * @dir: Protocol direction, encapsulation or decapsulation (DIR_ENC/DIR_DEC)
+ *
+ * Note: Here's how the input frame needs to be formatted so that the processing
+ * will be done correctly:
+ * For encapsulation:
+ * Input:
+ * +----+----------------+---------------------------------------------+
+ * | IV | Auth-only data | Padded data to be authenticated & Encrypted |
+ * +----+----------------+---------------------------------------------+
+ * Output:
+ * +--------------------------------------+
+ * | Authenticated & Encrypted data | ICV |
+ * +--------------------------------+-----+
+
+ * For decapsulation:
+ * Input:
+ * +----+----------------+--------------------------------+-----+
+ * | IV | Auth-only data | Authenticated & Encrypted data | ICV |
+ * +----+----------------+--------------------------------+-----+
+ * Output:
+ * +----+--------------------------+
+ * | Decrypted & authenticated data |
+ * +----+--------------------------+
+ *
+ * Note: This descriptor can use per-packet commands, encoded as below in the
+ * DPOVRD register:
+ * 32 24 16 0
+ * +------+---------------------+
+ * | 0x80 | 0x00| auth_only_len |
+ * +------+---------------------+
+ *
+ * This mechanism is available only for SoCs having SEC ERA >= 3. In other
+ * words, this will not work for P4080TO2
+ *
+ * Note: The descriptor does not add any kind of padding to the input data,
+ * so the upper layer needs to ensure that the data is padded properly,
+ * according to the selected cipher. Failure to do so will result in
+ * the descriptor failing with a data-size error.
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_authenc(uint32_t *descbuf, bool ps, bool swap,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata,
+ uint16_t ivlen, uint16_t auth_only_len,
+ uint8_t trunc_len, uint8_t dir)
+{
+ struct program prg;
+ struct program *p = &prg;
+ const bool is_aes_dec = (dir == DIR_DEC) &&
+ (cipherdata->algtype == OP_ALG_ALGSEL_AES);
+
+ LABEL(skip_patch_len);
+ LABEL(keyjmp);
+ LABEL(skipkeys);
+ LABEL(aonly_len_offset);
+ REFERENCE(pskip_patch_len);
+ REFERENCE(pkeyjmp);
+ REFERENCE(pskipkeys);
+ REFERENCE(read_len);
+ REFERENCE(write_len);
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+
+ /*
+ * Since we currently assume that key length is equal to hash digest
+ * size, it's ok to truncate keylen value.
+ */
+ trunc_len = trunc_len && (trunc_len < authdata->keylen) ?
+ trunc_len : (uint8_t)authdata->keylen;
+
+ SHR_HDR(p, SHR_SERIAL, 1, SC);
+
+ /*
+ * M0 will contain the value provided by the user when creating
+ * the shared descriptor. If the user provided an override in
+ * DPOVRD, then M0 will contain that value
+ */
+ MATHB(p, MATH0, ADD, auth_only_len, MATH0, 4, IMMED2);
+
+ if (rta_sec_era >= RTA_SEC_ERA_3) {
+ /*
+ * Check if the user wants to override the auth-only len
+ */
+ MATHB(p, DPOVRD, ADD, 0x80000000, MATH2, 4, IMMED2);
+
+ /*
+ * No need to patch the length of the auth-only data read if
+ * the user did not override it
+ */
+ pskip_patch_len = JUMP(p, skip_patch_len, LOCAL_JUMP, ALL_TRUE,
+ MATH_N);
+
+ /* Get auth-only len in M0 */
+ MATHB(p, MATH2, AND, 0xFFFF, MATH0, 4, IMMED2);
+
+ /*
+ * Since M0 is used in calculations, don't mangle it, copy
+ * its content to M1 and use this for patching.
+ */
+ MATHB(p, MATH0, ADD, MATH1, MATH1, 4, 0);
+
+ read_len = MOVE(p, DESCBUF, 0, MATH1, 0, 6, WAITCOMP | IMMED);
+ write_len = MOVE(p, MATH1, 0, DESCBUF, 0, 8, WAITCOMP | IMMED);
+
+ SET_LABEL(p, skip_patch_len);
+ }
+ /*
+ * MATH0 contains the value in DPOVRD w/o the MSB, or the initial
+ * value, as provided by the user at descriptor creation time
+ */
+ if (dir == DIR_ENC)
+ MATHB(p, MATH0, ADD, ivlen, MATH0, 4, IMMED2);
+ else
+ MATHB(p, MATH0, ADD, ivlen + trunc_len, MATH0, 4, IMMED2);
+
+ pkeyjmp = JUMP(p, keyjmp, LOCAL_JUMP, ALL_TRUE, SHRD);
+
+ KEY(p, KEY2, authdata->key_enc_flags, authdata->key, authdata->keylen,
+ INLINE_KEY(authdata));
+
+ /* Insert Key */
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+
+ /* Do operation */
+ ALG_OPERATION(p, authdata->algtype, OP_ALG_AAI_HMAC,
+ OP_ALG_AS_INITFINAL,
+ dir == DIR_ENC ? ICV_CHECK_DISABLE : ICV_CHECK_ENABLE,
+ dir);
+
+ if (is_aes_dec)
+ ALG_OPERATION(p, OP_ALG_ALGSEL_AES, cipherdata->algmode,
+ OP_ALG_AS_INITFINAL, ICV_CHECK_DISABLE, dir);
+ pskipkeys = JUMP(p, skipkeys, LOCAL_JUMP, ALL_TRUE, 0);
+
+ SET_LABEL(p, keyjmp);
+
+ ALG_OPERATION(p, authdata->algtype, OP_ALG_AAI_HMAC_PRECOMP,
+ OP_ALG_AS_INITFINAL,
+ dir == DIR_ENC ? ICV_CHECK_DISABLE : ICV_CHECK_ENABLE,
+ dir);
+
+ if (is_aes_dec) {
+ ALG_OPERATION(p, OP_ALG_ALGSEL_AES, cipherdata->algmode |
+ OP_ALG_AAI_DK, OP_ALG_AS_INITFINAL,
+ ICV_CHECK_DISABLE, dir);
+ SET_LABEL(p, skipkeys);
+ } else {
+ SET_LABEL(p, skipkeys);
+ ALG_OPERATION(p, cipherdata->algtype, cipherdata->algmode,
+ OP_ALG_AS_INITFINAL, ICV_CHECK_DISABLE, dir);
+ }
+
+ /*
+ * Prepare the length of the data to be both encrypted/decrypted
+ * and authenticated/checked
+ */
+ MATHB(p, SEQINSZ, SUB, MATH0, VSEQINSZ, 4, 0);
+
+ MATHB(p, VSEQINSZ, SUB, MATH3, VSEQOUTSZ, 4, 0);
+
+ /* Prepare for writing the output frame */
+ SEQFIFOSTORE(p, MSG, 0, 0, VLF);
+
+ SET_LABEL(p, aonly_len_offset);
+
+ /* Read IV */
+ SEQLOAD(p, CONTEXT1, 0, ivlen, 0);
+
+ /*
+ * Read data needed only for authentication. This is overwritten above
+ * if the user requested it.
+ */
+ SEQFIFOLOAD(p, MSG2, auth_only_len, 0);
+
+ if (dir == DIR_ENC) {
+ /*
+ * Read input plaintext, encrypt and authenticate & write to
+ * output
+ */
+ SEQFIFOLOAD(p, MSGOUTSNOOP, 0, VLF | LAST1 | LAST2 | FLUSH1);
+
+ /* Finally, write the ICV */
+ SEQSTORE(p, CONTEXT2, 0, trunc_len, 0);
+ } else {
+ /*
+ * Read input ciphertext, decrypt and authenticate & write to
+ * output
+ */
+ SEQFIFOLOAD(p, MSGINSNOOP, 0, VLF | LAST1 | LAST2 | FLUSH1);
+
+ /* Read the ICV to check */
+ SEQFIFOLOAD(p, ICV2, trunc_len, LAST2);
+ }
+
+ PATCH_JUMP(p, pkeyjmp, keyjmp);
+ PATCH_JUMP(p, pskipkeys, skipkeys);
+ PATCH_JUMP(p, pskipkeys, skipkeys);
+
+ if (rta_sec_era >= RTA_SEC_ERA_3) {
+ PATCH_JUMP(p, pskip_patch_len, skip_patch_len);
+ PATCH_MOVE(p, read_len, aonly_len_offset);
+ PATCH_MOVE(p, write_len, aonly_len_offset);
+ }
+
+ return PROGRAM_FINALIZE(p);
+}
+
+#endif /* __DESC_IPSEC_H__ */