aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/crypto/dpaa2_sec
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/crypto/dpaa2_sec')
-rw-r--r--drivers/crypto/dpaa2_sec/Makefile78
-rw-r--r--drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c1656
-rw-r--r--drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h70
-rw-r--r--drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h368
-rw-r--r--drivers/crypto/dpaa2_sec/hw/compat.h157
-rw-r--r--drivers/crypto/dpaa2_sec/hw/desc.h2601
-rw-r--r--drivers/crypto/dpaa2_sec/hw/desc/algo.h465
-rw-r--r--drivers/crypto/dpaa2_sec/hw/desc/common.h131
-rw-r--r--drivers/crypto/dpaa2_sec/hw/desc/ipsec.h1547
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta.h954
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/fifo_load_store_cmd.h346
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/header_cmd.h251
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/jump_cmd.h207
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/key_cmd.h222
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/load_cmd.h335
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/math_cmd.h402
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/move_cmd.h445
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/nfifo_cmd.h196
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/operation_cmd.h599
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/protocol_cmd.h732
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/sec_run_time_asm.h823
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/seq_in_out_ptr_cmd.h208
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/signature_cmd.h75
-rw-r--r--drivers/crypto/dpaa2_sec/hw/rta/store_cmd.h185
-rw-r--r--drivers/crypto/dpaa2_sec/mc/dpseci.c558
-rw-r--r--drivers/crypto/dpaa2_sec/mc/fsl_dpseci.h746
-rw-r--r--drivers/crypto/dpaa2_sec/mc/fsl_dpseci_cmd.h256
-rw-r--r--drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map4
28 files changed, 14617 insertions, 0 deletions
diff --git a/drivers/crypto/dpaa2_sec/Makefile b/drivers/crypto/dpaa2_sec/Makefile
new file mode 100644
index 00000000..11c7c785
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/Makefile
@@ -0,0 +1,78 @@
+# BSD LICENSE
+#
+# Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+# Copyright (c) 2016 NXP. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Freescale Semiconductor, Inc nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = librte_pmd_dpaa2_sec.a
+
+# build flags
+ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT),y)
+CFLAGS += -O0 -g
+CFLAGS += "-Wno-error"
+else
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+endif
+CFLAGS += -D _GNU_SOURCE
+
+CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa2_sec/
+CFLAGS += -I$(RTE_SDK)/drivers/crypto/dpaa2_sec/mc
+CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/
+CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/qbman/include
+CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/mc
+CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/portal
+CFLAGS += -I$(RTE_SDK)/drivers/mempool/dpaa2/
+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
+
+# versioning export map
+EXPORT_MAP := rte_pmd_dpaa2_sec_version.map
+
+# library version
+LIBABIVER := 1
+
+# library source files
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += dpaa2_sec_dpseci.c
+SRCS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += mc/dpseci.c
+
+# library dependencies
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += lib/librte_mempool lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += lib/librte_cryptodev
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += drivers/bus/fslmc
+DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC) += drivers/mempool/dpaa2
+
+LDLIBS += -lrte_bus_fslmc
+LDLIBS += -lrte_mempool_dpaa2
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
new file mode 100644
index 00000000..4e01fe81
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -0,0 +1,1656 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (c) 2016 NXP. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Freescale Semiconductor, Inc nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <time.h>
+#include <net/if.h>
+
+#include <rte_mbuf.h>
+#include <rte_cryptodev.h>
+#include <rte_malloc.h>
+#include <rte_memcpy.h>
+#include <rte_string_fns.h>
+#include <rte_cycles.h>
+#include <rte_kvargs.h>
+#include <rte_dev.h>
+#include <rte_cryptodev_pmd.h>
+#include <rte_common.h>
+#include <rte_fslmc.h>
+#include <fslmc_vfio.h>
+#include <dpaa2_hw_pvt.h>
+#include <dpaa2_hw_dpio.h>
+#include <dpaa2_hw_mempool.h>
+#include <fsl_dpseci.h>
+#include <fsl_mc_sys.h>
+
+#include "dpaa2_sec_priv.h"
+#include "dpaa2_sec_logs.h"
+
+/* RTA header files */
+#include <hw/desc/ipsec.h>
+#include <hw/desc/algo.h>
+
+/* Minimum job descriptor consists of a oneword job descriptor HEADER and
+ * a pointer to the shared descriptor
+ */
+#define MIN_JOB_DESC_SIZE (CAAM_CMD_SZ + CAAM_PTR_SZ)
+#define FSL_VENDOR_ID 0x1957
+#define FSL_DEVICE_ID 0x410
+#define FSL_SUBSYSTEM_SEC 1
+#define FSL_MC_DPSECI_DEVID 3
+
+#define NO_PREFETCH 0
+#define TDES_CBC_IV_LEN 8
+#define AES_CBC_IV_LEN 16
+enum rta_sec_era rta_sec_era = RTA_SEC_ERA_8;
+
+static inline int
+build_authenc_fd(dpaa2_sec_session *sess,
+ struct rte_crypto_op *op,
+ struct qbman_fd *fd, uint16_t bpid)
+{
+ struct rte_crypto_sym_op *sym_op = op->sym;
+ struct ctxt_priv *priv = sess->ctxt;
+ struct qbman_fle *fle, *sge;
+ struct sec_flow_context *flc;
+ uint32_t auth_only_len = sym_op->auth.data.length -
+ sym_op->cipher.data.length;
+ int icv_len = sym_op->auth.digest.length;
+ uint8_t *old_icv;
+ uint32_t mem_len = (7 * sizeof(struct qbman_fle)) + icv_len;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* we are using the first FLE entry to store Mbuf.
+ * Currently we donot know which FLE has the mbuf stored.
+ * So while retreiving we can go back 1 FLE from the FD -ADDR
+ * to get the MBUF Addr from the previous FLE.
+ * We can have a better approach to use the inline Mbuf
+ */
+ fle = rte_zmalloc(NULL, mem_len, RTE_CACHE_LINE_SIZE);
+ if (!fle) {
+ RTE_LOG(ERR, PMD, "Memory alloc failed for SGE\n");
+ return -1;
+ }
+ DPAA2_SET_FLE_ADDR(fle, DPAA2_OP_VADDR_TO_IOVA(op));
+ fle = fle + 1;
+ sge = fle + 2;
+ if (likely(bpid < MAX_BPID)) {
+ DPAA2_SET_FD_BPID(fd, bpid);
+ DPAA2_SET_FLE_BPID(fle, bpid);
+ DPAA2_SET_FLE_BPID(fle + 1, bpid);
+ DPAA2_SET_FLE_BPID(sge, bpid);
+ DPAA2_SET_FLE_BPID(sge + 1, bpid);
+ DPAA2_SET_FLE_BPID(sge + 2, bpid);
+ DPAA2_SET_FLE_BPID(sge + 3, bpid);
+ } else {
+ DPAA2_SET_FD_IVP(fd);
+ DPAA2_SET_FLE_IVP(fle);
+ DPAA2_SET_FLE_IVP((fle + 1));
+ DPAA2_SET_FLE_IVP(sge);
+ DPAA2_SET_FLE_IVP((sge + 1));
+ DPAA2_SET_FLE_IVP((sge + 2));
+ DPAA2_SET_FLE_IVP((sge + 3));
+ }
+
+ /* Save the shared descriptor */
+ flc = &priv->flc_desc[0].flc;
+ /* Configure FD as a FRAME LIST */
+ DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(fle));
+ DPAA2_SET_FD_COMPOUND_FMT(fd);
+ DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
+
+ PMD_TX_LOG(DEBUG, "auth_off: 0x%x/length %d, digest-len=%d\n"
+ "cipher_off: 0x%x/length %d, iv-len=%d data_off: 0x%x\n",
+ sym_op->auth.data.offset,
+ sym_op->auth.data.length,
+ sym_op->auth.digest.length,
+ sym_op->cipher.data.offset,
+ sym_op->cipher.data.length,
+ sym_op->cipher.iv.length,
+ sym_op->m_src->data_off);
+
+ /* Configure Output FLE with Scatter/Gather Entry */
+ DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge));
+ if (auth_only_len)
+ DPAA2_SET_FLE_INTERNAL_JD(fle, auth_only_len);
+ fle->length = (sess->dir == DIR_ENC) ?
+ (sym_op->cipher.data.length + icv_len) :
+ sym_op->cipher.data.length;
+
+ DPAA2_SET_FLE_SG_EXT(fle);
+
+ /* Configure Output SGE for Encap/Decap */
+ DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
+ DPAA2_SET_FLE_OFFSET(sge, sym_op->cipher.data.offset +
+ sym_op->m_src->data_off);
+ sge->length = sym_op->cipher.data.length;
+
+ if (sess->dir == DIR_ENC) {
+ sge++;
+ DPAA2_SET_FLE_ADDR(sge,
+ DPAA2_VADDR_TO_IOVA(sym_op->auth.digest.data));
+ sge->length = sym_op->auth.digest.length;
+ DPAA2_SET_FD_LEN(fd, (sym_op->auth.data.length +
+ sym_op->cipher.iv.length));
+ }
+ DPAA2_SET_FLE_FIN(sge);
+
+ sge++;
+ fle++;
+
+ /* Configure Input FLE with Scatter/Gather Entry */
+ DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge));
+ DPAA2_SET_FLE_SG_EXT(fle);
+ DPAA2_SET_FLE_FIN(fle);
+ fle->length = (sess->dir == DIR_ENC) ?
+ (sym_op->auth.data.length + sym_op->cipher.iv.length) :
+ (sym_op->auth.data.length + sym_op->cipher.iv.length +
+ sym_op->auth.digest.length);
+
+ /* Configure Input SGE for Encap/Decap */
+ DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(sym_op->cipher.iv.data));
+ sge->length = sym_op->cipher.iv.length;
+ sge++;
+
+ DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
+ DPAA2_SET_FLE_OFFSET(sge, sym_op->auth.data.offset +
+ sym_op->m_src->data_off);
+ sge->length = sym_op->auth.data.length;
+ if (sess->dir == DIR_DEC) {
+ sge++;
+ old_icv = (uint8_t *)(sge + 1);
+ memcpy(old_icv, sym_op->auth.digest.data,
+ sym_op->auth.digest.length);
+ memset(sym_op->auth.digest.data, 0, sym_op->auth.digest.length);
+ DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(old_icv));
+ sge->length = sym_op->auth.digest.length;
+ DPAA2_SET_FD_LEN(fd, (sym_op->auth.data.length +
+ sym_op->auth.digest.length +
+ sym_op->cipher.iv.length));
+ }
+ DPAA2_SET_FLE_FIN(sge);
+ if (auth_only_len) {
+ DPAA2_SET_FLE_INTERNAL_JD(fle, auth_only_len);
+ DPAA2_SET_FD_INTERNAL_JD(fd, auth_only_len);
+ }
+ return 0;
+}
+
+static inline int
+build_auth_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
+ struct qbman_fd *fd, uint16_t bpid)
+{
+ struct rte_crypto_sym_op *sym_op = op->sym;
+ struct qbman_fle *fle, *sge;
+ uint32_t mem_len = (sess->dir == DIR_ENC) ?
+ (3 * sizeof(struct qbman_fle)) :
+ (5 * sizeof(struct qbman_fle) +
+ sym_op->auth.digest.length);
+ struct sec_flow_context *flc;
+ struct ctxt_priv *priv = sess->ctxt;
+ uint8_t *old_digest;
+
+ PMD_INIT_FUNC_TRACE();
+
+ fle = rte_zmalloc(NULL, mem_len, RTE_CACHE_LINE_SIZE);
+ if (!fle) {
+ RTE_LOG(ERR, PMD, "Memory alloc failed for FLE\n");
+ return -1;
+ }
+ /* TODO we are using the first FLE entry to store Mbuf.
+ * Currently we donot know which FLE has the mbuf stored.
+ * So while retreiving we can go back 1 FLE from the FD -ADDR
+ * to get the MBUF Addr from the previous FLE.
+ * We can have a better approach to use the inline Mbuf
+ */
+ DPAA2_SET_FLE_ADDR(fle, DPAA2_OP_VADDR_TO_IOVA(op));
+ fle = fle + 1;
+
+ if (likely(bpid < MAX_BPID)) {
+ DPAA2_SET_FD_BPID(fd, bpid);
+ DPAA2_SET_FLE_BPID(fle, bpid);
+ DPAA2_SET_FLE_BPID(fle + 1, bpid);
+ } else {
+ DPAA2_SET_FD_IVP(fd);
+ DPAA2_SET_FLE_IVP(fle);
+ DPAA2_SET_FLE_IVP((fle + 1));
+ }
+ flc = &priv->flc_desc[DESC_INITFINAL].flc;
+ DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
+
+ DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sym_op->auth.digest.data));
+ fle->length = sym_op->auth.digest.length;
+
+ DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(fle));
+ DPAA2_SET_FD_COMPOUND_FMT(fd);
+ fle++;
+
+ if (sess->dir == DIR_ENC) {
+ DPAA2_SET_FLE_ADDR(fle,
+ DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
+ DPAA2_SET_FLE_OFFSET(fle, sym_op->auth.data.offset +
+ sym_op->m_src->data_off);
+ DPAA2_SET_FD_LEN(fd, sym_op->auth.data.length);
+ fle->length = sym_op->auth.data.length;
+ } else {
+ sge = fle + 2;
+ DPAA2_SET_FLE_SG_EXT(fle);
+ DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge));
+
+ if (likely(bpid < MAX_BPID)) {
+ DPAA2_SET_FLE_BPID(sge, bpid);
+ DPAA2_SET_FLE_BPID(sge + 1, bpid);
+ } else {
+ DPAA2_SET_FLE_IVP(sge);
+ DPAA2_SET_FLE_IVP((sge + 1));
+ }
+ DPAA2_SET_FLE_ADDR(sge,
+ DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
+ DPAA2_SET_FLE_OFFSET(sge, sym_op->auth.data.offset +
+ sym_op->m_src->data_off);
+
+ DPAA2_SET_FD_LEN(fd, sym_op->auth.data.length +
+ sym_op->auth.digest.length);
+ sge->length = sym_op->auth.data.length;
+ sge++;
+ old_digest = (uint8_t *)(sge + 1);
+ rte_memcpy(old_digest, sym_op->auth.digest.data,
+ sym_op->auth.digest.length);
+ memset(sym_op->auth.digest.data, 0, sym_op->auth.digest.length);
+ DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(old_digest));
+ sge->length = sym_op->auth.digest.length;
+ fle->length = sym_op->auth.data.length +
+ sym_op->auth.digest.length;
+ DPAA2_SET_FLE_FIN(sge);
+ }
+ DPAA2_SET_FLE_FIN(fle);
+
+ return 0;
+}
+
+static int
+build_cipher_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
+ struct qbman_fd *fd, uint16_t bpid)
+{
+ struct rte_crypto_sym_op *sym_op = op->sym;
+ struct qbman_fle *fle, *sge;
+ uint32_t mem_len = (5 * sizeof(struct qbman_fle));
+ struct sec_flow_context *flc;
+ struct ctxt_priv *priv = sess->ctxt;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* todo - we can use some mempool to avoid malloc here */
+ fle = rte_zmalloc(NULL, mem_len, RTE_CACHE_LINE_SIZE);
+ if (!fle) {
+ RTE_LOG(ERR, PMD, "Memory alloc failed for SGE\n");
+ return -1;
+ }
+ /* TODO we are using the first FLE entry to store Mbuf.
+ * Currently we donot know which FLE has the mbuf stored.
+ * So while retreiving we can go back 1 FLE from the FD -ADDR
+ * to get the MBUF Addr from the previous FLE.
+ * We can have a better approach to use the inline Mbuf
+ */
+ DPAA2_SET_FLE_ADDR(fle, DPAA2_OP_VADDR_TO_IOVA(op));
+ fle = fle + 1;
+ sge = fle + 2;
+
+ if (likely(bpid < MAX_BPID)) {
+ DPAA2_SET_FD_BPID(fd, bpid);
+ DPAA2_SET_FLE_BPID(fle, bpid);
+ DPAA2_SET_FLE_BPID(fle + 1, bpid);
+ DPAA2_SET_FLE_BPID(sge, bpid);
+ DPAA2_SET_FLE_BPID(sge + 1, bpid);
+ } else {
+ DPAA2_SET_FD_IVP(fd);
+ DPAA2_SET_FLE_IVP(fle);
+ DPAA2_SET_FLE_IVP((fle + 1));
+ DPAA2_SET_FLE_IVP(sge);
+ DPAA2_SET_FLE_IVP((sge + 1));
+ }
+
+ flc = &priv->flc_desc[0].flc;
+ DPAA2_SET_FD_ADDR(fd, DPAA2_VADDR_TO_IOVA(fle));
+ DPAA2_SET_FD_LEN(fd, sym_op->cipher.data.length +
+ sym_op->cipher.iv.length);
+ DPAA2_SET_FD_COMPOUND_FMT(fd);
+ DPAA2_SET_FD_FLC(fd, DPAA2_VADDR_TO_IOVA(flc));
+
+ PMD_TX_LOG(DEBUG, "cipher_off: 0x%x/length %d,ivlen=%d data_off: 0x%x",
+ sym_op->cipher.data.offset,
+ sym_op->cipher.data.length,
+ sym_op->cipher.iv.length,
+ sym_op->m_src->data_off);
+
+ DPAA2_SET_FLE_ADDR(fle, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
+ DPAA2_SET_FLE_OFFSET(fle, sym_op->cipher.data.offset +
+ sym_op->m_src->data_off);
+
+ fle->length = sym_op->cipher.data.length + sym_op->cipher.iv.length;
+
+ PMD_TX_LOG(DEBUG, "1 - flc = %p, fle = %p FLEaddr = %x-%x, length %d",
+ flc, fle, fle->addr_hi, fle->addr_lo, fle->length);
+
+ fle++;
+
+ DPAA2_SET_FLE_ADDR(fle, DPAA2_VADDR_TO_IOVA(sge));
+ fle->length = sym_op->cipher.data.length + sym_op->cipher.iv.length;
+
+ DPAA2_SET_FLE_SG_EXT(fle);
+
+ DPAA2_SET_FLE_ADDR(sge, DPAA2_VADDR_TO_IOVA(sym_op->cipher.iv.data));
+ sge->length = sym_op->cipher.iv.length;
+
+ sge++;
+ DPAA2_SET_FLE_ADDR(sge, DPAA2_MBUF_VADDR_TO_IOVA(sym_op->m_src));
+ DPAA2_SET_FLE_OFFSET(sge, sym_op->cipher.data.offset +
+ sym_op->m_src->data_off);
+
+ sge->length = sym_op->cipher.data.length;
+ DPAA2_SET_FLE_FIN(sge);
+ DPAA2_SET_FLE_FIN(fle);
+
+ PMD_TX_LOG(DEBUG, "fdaddr =%p bpid =%d meta =%d off =%d, len =%d",
+ (void *)DPAA2_GET_FD_ADDR(fd),
+ DPAA2_GET_FD_BPID(fd),
+ rte_dpaa2_bpid_info[bpid].meta_data_size,
+ DPAA2_GET_FD_OFFSET(fd),
+ DPAA2_GET_FD_LEN(fd));
+
+ return 0;
+}
+
+static inline int
+build_sec_fd(dpaa2_sec_session *sess, struct rte_crypto_op *op,
+ struct qbman_fd *fd, uint16_t bpid)
+{
+ int ret = -1;
+
+ PMD_INIT_FUNC_TRACE();
+
+ switch (sess->ctxt_type) {
+ case DPAA2_SEC_CIPHER:
+ ret = build_cipher_fd(sess, op, fd, bpid);
+ break;
+ case DPAA2_SEC_AUTH:
+ ret = build_auth_fd(sess, op, fd, bpid);
+ break;
+ case DPAA2_SEC_CIPHER_HASH:
+ ret = build_authenc_fd(sess, op, fd, bpid);
+ break;
+ case DPAA2_SEC_HASH_CIPHER:
+ default:
+ RTE_LOG(ERR, PMD, "error: Unsupported session\n");
+ }
+ return ret;
+}
+
+static uint16_t
+dpaa2_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
+ uint16_t nb_ops)
+{
+ /* Function to transmit the frames to given device and VQ*/
+ uint32_t loop;
+ int32_t ret;
+ struct qbman_fd fd_arr[MAX_TX_RING_SLOTS];
+ uint32_t frames_to_send;
+ struct qbman_eq_desc eqdesc;
+ struct dpaa2_sec_qp *dpaa2_qp = (struct dpaa2_sec_qp *)qp;
+ struct qbman_swp *swp;
+ uint16_t num_tx = 0;
+ /*todo - need to support multiple buffer pools */
+ uint16_t bpid;
+ struct rte_mempool *mb_pool;
+ dpaa2_sec_session *sess;
+
+ if (unlikely(nb_ops == 0))
+ return 0;
+
+ if (ops[0]->sym->sess_type != RTE_CRYPTO_SYM_OP_WITH_SESSION) {
+ RTE_LOG(ERR, PMD, "sessionless crypto op not supported\n");
+ return 0;
+ }
+ /*Prepare enqueue descriptor*/
+ qbman_eq_desc_clear(&eqdesc);
+ qbman_eq_desc_set_no_orp(&eqdesc, DPAA2_EQ_RESP_ERR_FQ);
+ qbman_eq_desc_set_response(&eqdesc, 0, 0);
+ qbman_eq_desc_set_fq(&eqdesc, dpaa2_qp->tx_vq.fqid);
+
+ if (!DPAA2_PER_LCORE_SEC_DPIO) {
+ ret = dpaa2_affine_qbman_swp_sec();
+ if (ret) {
+ RTE_LOG(ERR, PMD, "Failure in affining portal\n");
+ return 0;
+ }
+ }
+ swp = DPAA2_PER_LCORE_SEC_PORTAL;
+
+ while (nb_ops) {
+ frames_to_send = (nb_ops >> 3) ? MAX_TX_RING_SLOTS : nb_ops;
+
+ for (loop = 0; loop < frames_to_send; loop++) {
+ /*Clear the unused FD fields before sending*/
+ memset(&fd_arr[loop], 0, sizeof(struct qbman_fd));
+ sess = (dpaa2_sec_session *)
+ (*ops)->sym->session->_private;
+ mb_pool = (*ops)->sym->m_src->pool;
+ bpid = mempool_to_bpid(mb_pool);
+ ret = build_sec_fd(sess, *ops, &fd_arr[loop], bpid);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "error: Improper packet"
+ " contents for crypto operation\n");
+ goto skip_tx;
+ }
+ ops++;
+ }
+ loop = 0;
+ while (loop < frames_to_send) {
+ loop += qbman_swp_send_multiple(swp, &eqdesc,
+ &fd_arr[loop],
+ frames_to_send - loop);
+ }
+
+ num_tx += frames_to_send;
+ nb_ops -= frames_to_send;
+ }
+skip_tx:
+ dpaa2_qp->tx_vq.tx_pkts += num_tx;
+ dpaa2_qp->tx_vq.err_pkts += nb_ops;
+ return num_tx;
+}
+
+static inline struct rte_crypto_op *
+sec_fd_to_mbuf(const struct qbman_fd *fd)
+{
+ struct qbman_fle *fle;
+ struct rte_crypto_op *op;
+
+ fle = (struct qbman_fle *)DPAA2_IOVA_TO_VADDR(DPAA2_GET_FD_ADDR(fd));
+
+ PMD_RX_LOG(DEBUG, "FLE addr = %x - %x, offset = %x",
+ fle->addr_hi, fle->addr_lo, fle->fin_bpid_offset);
+
+ /* we are using the first FLE entry to store Mbuf.
+ * Currently we donot know which FLE has the mbuf stored.
+ * So while retreiving we can go back 1 FLE from the FD -ADDR
+ * to get the MBUF Addr from the previous FLE.
+ * We can have a better approach to use the inline Mbuf
+ */
+
+ if (unlikely(DPAA2_GET_FD_IVP(fd))) {
+ /* TODO complete it. */
+ RTE_LOG(ERR, PMD, "error: Non inline buffer - WHAT to DO?");
+ return NULL;
+ }
+ op = (struct rte_crypto_op *)DPAA2_IOVA_TO_VADDR(
+ DPAA2_GET_FLE_ADDR((fle - 1)));
+
+ /* Prefeth op */
+ rte_prefetch0(op->sym->m_src);
+
+ PMD_RX_LOG(DEBUG, "mbuf %p BMAN buf addr %p",
+ (void *)op->sym->m_src, op->sym->m_src->buf_addr);
+
+ PMD_RX_LOG(DEBUG, "fdaddr =%p bpid =%d meta =%d off =%d, len =%d",
+ (void *)DPAA2_GET_FD_ADDR(fd),
+ DPAA2_GET_FD_BPID(fd),
+ rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size,
+ DPAA2_GET_FD_OFFSET(fd),
+ DPAA2_GET_FD_LEN(fd));
+
+ /* free the fle memory */
+ rte_free(fle - 1);
+
+ return op;
+}
+
+static uint16_t
+dpaa2_sec_dequeue_burst(void *qp, struct rte_crypto_op **ops,
+ uint16_t nb_ops)
+{
+ /* Function is responsible to receive frames for a given device and VQ*/
+ struct dpaa2_sec_qp *dpaa2_qp = (struct dpaa2_sec_qp *)qp;
+ struct qbman_result *dq_storage;
+ uint32_t fqid = dpaa2_qp->rx_vq.fqid;
+ int ret, num_rx = 0;
+ uint8_t is_last = 0, status;
+ struct qbman_swp *swp;
+ const struct qbman_fd *fd;
+ struct qbman_pull_desc pulldesc;
+
+ if (!DPAA2_PER_LCORE_SEC_DPIO) {
+ ret = dpaa2_affine_qbman_swp_sec();
+ if (ret) {
+ RTE_LOG(ERR, PMD, "Failure in affining portal\n");
+ return 0;
+ }
+ }
+ swp = DPAA2_PER_LCORE_SEC_PORTAL;
+ dq_storage = dpaa2_qp->rx_vq.q_storage->dq_storage[0];
+
+ qbman_pull_desc_clear(&pulldesc);
+ qbman_pull_desc_set_numframes(&pulldesc,
+ (nb_ops > DPAA2_DQRR_RING_SIZE) ?
+ DPAA2_DQRR_RING_SIZE : nb_ops);
+ qbman_pull_desc_set_fq(&pulldesc, fqid);
+ qbman_pull_desc_set_storage(&pulldesc, dq_storage,
+ (dma_addr_t)DPAA2_VADDR_TO_IOVA(dq_storage),
+ 1);
+
+ /*Issue a volatile dequeue command. */
+ while (1) {
+ if (qbman_swp_pull(swp, &pulldesc)) {
+ RTE_LOG(WARNING, PMD, "SEC VDQ command is not issued."
+ "QBMAN is busy\n");
+ /* Portal was busy, try again */
+ continue;
+ }
+ break;
+ };
+
+ /* Receive the packets till Last Dequeue entry is found with
+ * respect to the above issues PULL command.
+ */
+ while (!is_last) {
+ /* Check if the previous issued command is completed.
+ * Also seems like the SWP is shared between the Ethernet Driver
+ * and the SEC driver.
+ */
+ while (!qbman_check_command_complete(swp, dq_storage))
+ ;
+
+ /* Loop until the dq_storage is updated with
+ * new token by QBMAN
+ */
+ while (!qbman_result_has_new_result(swp, dq_storage))
+ ;
+ /* Check whether Last Pull command is Expired and
+ * setting Condition for Loop termination
+ */
+ if (qbman_result_DQ_is_pull_complete(dq_storage)) {
+ is_last = 1;
+ /* Check for valid frame. */
+ status = (uint8_t)qbman_result_DQ_flags(dq_storage);
+ if (unlikely(
+ (status & QBMAN_DQ_STAT_VALIDFRAME) == 0)) {
+ PMD_RX_LOG(DEBUG, "No frame is delivered");
+ continue;
+ }
+ }
+
+ fd = qbman_result_DQ_fd(dq_storage);
+ ops[num_rx] = sec_fd_to_mbuf(fd);
+
+ if (unlikely(fd->simple.frc)) {
+ /* TODO Parse SEC errors */
+ RTE_LOG(ERR, PMD, "SEC returned Error - %x\n",
+ fd->simple.frc);
+ ops[num_rx]->status = RTE_CRYPTO_OP_STATUS_ERROR;
+ } else {
+ ops[num_rx]->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
+ }
+
+ num_rx++;
+ dq_storage++;
+ } /* End of Packet Rx loop */
+
+ dpaa2_qp->rx_vq.rx_pkts += num_rx;
+
+ PMD_RX_LOG(DEBUG, "SEC Received %d Packets", num_rx);
+ /*Return the total number of packets received to DPAA2 app*/
+ return num_rx;
+}
+
+/** Release queue pair */
+static int
+dpaa2_sec_queue_pair_release(struct rte_cryptodev *dev, uint16_t queue_pair_id)
+{
+ struct dpaa2_sec_qp *qp =
+ (struct dpaa2_sec_qp *)dev->data->queue_pairs[queue_pair_id];
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (qp->rx_vq.q_storage) {
+ dpaa2_free_dq_storage(qp->rx_vq.q_storage);
+ rte_free(qp->rx_vq.q_storage);
+ }
+ rte_free(qp);
+
+ dev->data->queue_pairs[queue_pair_id] = NULL;
+
+ return 0;
+}
+
+/** Setup a queue pair */
+static int
+dpaa2_sec_queue_pair_setup(struct rte_cryptodev *dev, uint16_t qp_id,
+ __rte_unused const struct rte_cryptodev_qp_conf *qp_conf,
+ __rte_unused int socket_id)
+{
+ struct dpaa2_sec_dev_private *priv = dev->data->dev_private;
+ struct dpaa2_sec_qp *qp;
+ struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw;
+ struct dpseci_rx_queue_cfg cfg;
+ int32_t retcode;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* If qp is already in use free ring memory and qp metadata. */
+ if (dev->data->queue_pairs[qp_id] != NULL) {
+ PMD_DRV_LOG(INFO, "QP already setup");
+ return 0;
+ }
+
+ PMD_DRV_LOG(DEBUG, "dev =%p, queue =%d, conf =%p",
+ dev, qp_id, qp_conf);
+
+ memset(&cfg, 0, sizeof(struct dpseci_rx_queue_cfg));
+
+ qp = rte_malloc(NULL, sizeof(struct dpaa2_sec_qp),
+ RTE_CACHE_LINE_SIZE);
+ if (!qp) {
+ RTE_LOG(ERR, PMD, "malloc failed for rx/tx queues\n");
+ return -1;
+ }
+
+ qp->rx_vq.dev = dev;
+ qp->tx_vq.dev = dev;
+ qp->rx_vq.q_storage = rte_malloc("sec dq storage",
+ sizeof(struct queue_storage_info_t),
+ RTE_CACHE_LINE_SIZE);
+ if (!qp->rx_vq.q_storage) {
+ RTE_LOG(ERR, PMD, "malloc failed for q_storage\n");
+ return -1;
+ }
+ memset(qp->rx_vq.q_storage, 0, sizeof(struct queue_storage_info_t));
+
+ if (dpaa2_alloc_dq_storage(qp->rx_vq.q_storage)) {
+ RTE_LOG(ERR, PMD, "dpaa2_alloc_dq_storage failed\n");
+ return -1;
+ }
+
+ dev->data->queue_pairs[qp_id] = qp;
+
+ cfg.options = cfg.options | DPSECI_QUEUE_OPT_USER_CTX;
+ cfg.user_ctx = (uint64_t)(&qp->rx_vq);
+ retcode = dpseci_set_rx_queue(dpseci, CMD_PRI_LOW, priv->token,
+ qp_id, &cfg);
+ return retcode;
+}
+
+/** Start queue pair */
+static int
+dpaa2_sec_queue_pair_start(__rte_unused struct rte_cryptodev *dev,
+ __rte_unused uint16_t queue_pair_id)
+{
+ PMD_INIT_FUNC_TRACE();
+
+ return 0;
+}
+
+/** Stop queue pair */
+static int
+dpaa2_sec_queue_pair_stop(__rte_unused struct rte_cryptodev *dev,
+ __rte_unused uint16_t queue_pair_id)
+{
+ PMD_INIT_FUNC_TRACE();
+
+ return 0;
+}
+
+/** Return the number of allocated queue pairs */
+static uint32_t
+dpaa2_sec_queue_pair_count(struct rte_cryptodev *dev)
+{
+ PMD_INIT_FUNC_TRACE();
+
+ return dev->data->nb_queue_pairs;
+}
+
+/** Returns the size of the aesni gcm session structure */
+static unsigned int
+dpaa2_sec_session_get_size(struct rte_cryptodev *dev __rte_unused)
+{
+ PMD_INIT_FUNC_TRACE();
+
+ return sizeof(dpaa2_sec_session);
+}
+
+static void
+dpaa2_sec_session_initialize(struct rte_mempool *mp __rte_unused,
+ void *sess __rte_unused)
+{
+ PMD_INIT_FUNC_TRACE();
+}
+
+static int
+dpaa2_sec_cipher_init(struct rte_cryptodev *dev,
+ struct rte_crypto_sym_xform *xform,
+ dpaa2_sec_session *session)
+{
+ struct dpaa2_sec_cipher_ctxt *ctxt = &session->ext_params.cipher_ctxt;
+ struct alginfo cipherdata;
+ int bufsize, i;
+ struct ctxt_priv *priv;
+ struct sec_flow_context *flc;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* For SEC CIPHER only one descriptor is required. */
+ priv = (struct ctxt_priv *)rte_zmalloc(NULL,
+ sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc),
+ RTE_CACHE_LINE_SIZE);
+ if (priv == NULL) {
+ RTE_LOG(ERR, PMD, "No Memory for priv CTXT");
+ return -1;
+ }
+
+ flc = &priv->flc_desc[0].flc;
+
+ session->cipher_key.data = rte_zmalloc(NULL, xform->cipher.key.length,
+ RTE_CACHE_LINE_SIZE);
+ if (session->cipher_key.data == NULL) {
+ RTE_LOG(ERR, PMD, "No Memory for cipher key");
+ rte_free(priv);
+ return -1;
+ }
+ session->cipher_key.length = xform->cipher.key.length;
+
+ memcpy(session->cipher_key.data, xform->cipher.key.data,
+ xform->cipher.key.length);
+ cipherdata.key = (uint64_t)session->cipher_key.data;
+ cipherdata.keylen = session->cipher_key.length;
+ cipherdata.key_enc_flags = 0;
+ cipherdata.key_type = RTA_DATA_IMM;
+
+ switch (xform->cipher.algo) {
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ cipherdata.algtype = OP_ALG_ALGSEL_AES;
+ cipherdata.algmode = OP_ALG_AAI_CBC;
+ session->cipher_alg = RTE_CRYPTO_CIPHER_AES_CBC;
+ ctxt->iv.length = AES_CBC_IV_LEN;
+ break;
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ cipherdata.algtype = OP_ALG_ALGSEL_3DES;
+ cipherdata.algmode = OP_ALG_AAI_CBC;
+ session->cipher_alg = RTE_CRYPTO_CIPHER_3DES_CBC;
+ ctxt->iv.length = TDES_CBC_IV_LEN;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ case RTE_CRYPTO_CIPHER_3DES_CTR:
+ case RTE_CRYPTO_CIPHER_AES_GCM:
+ case RTE_CRYPTO_CIPHER_AES_CCM:
+ case RTE_CRYPTO_CIPHER_AES_ECB:
+ case RTE_CRYPTO_CIPHER_3DES_ECB:
+ case RTE_CRYPTO_CIPHER_AES_XTS:
+ case RTE_CRYPTO_CIPHER_AES_F8:
+ case RTE_CRYPTO_CIPHER_ARC4:
+ case RTE_CRYPTO_CIPHER_KASUMI_F8:
+ case RTE_CRYPTO_CIPHER_SNOW3G_UEA2:
+ case RTE_CRYPTO_CIPHER_ZUC_EEA3:
+ case RTE_CRYPTO_CIPHER_NULL:
+ RTE_LOG(ERR, PMD, "Crypto: Unsupported Cipher alg %u",
+ xform->cipher.algo);
+ goto error_out;
+ default:
+ RTE_LOG(ERR, PMD, "Crypto: Undefined Cipher specified %u\n",
+ xform->cipher.algo);
+ goto error_out;
+ }
+ session->dir = (xform->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
+ DIR_ENC : DIR_DEC;
+
+ bufsize = cnstr_shdsc_blkcipher(priv->flc_desc[0].desc, 1, 0,
+ &cipherdata, NULL, ctxt->iv.length,
+ session->dir);
+ if (bufsize < 0) {
+ RTE_LOG(ERR, PMD, "Crypto: Descriptor build failed\n");
+ goto error_out;
+ }
+ flc->dhr = 0;
+ flc->bpv0 = 0x1;
+ flc->mode_bits = 0x8000;
+
+ flc->word1_sdl = (uint8_t)bufsize;
+ flc->word2_rflc_31_0 = lower_32_bits(
+ (uint64_t)&(((struct dpaa2_sec_qp *)
+ dev->data->queue_pairs[0])->rx_vq));
+ flc->word3_rflc_63_32 = upper_32_bits(
+ (uint64_t)&(((struct dpaa2_sec_qp *)
+ dev->data->queue_pairs[0])->rx_vq));
+ session->ctxt = priv;
+
+ for (i = 0; i < bufsize; i++)
+ PMD_DRV_LOG(DEBUG, "DESC[%d]:0x%x\n",
+ i, priv->flc_desc[0].desc[i]);
+
+ return 0;
+
+error_out:
+ rte_free(session->cipher_key.data);
+ rte_free(priv);
+ return -1;
+}
+
+static int
+dpaa2_sec_auth_init(struct rte_cryptodev *dev,
+ struct rte_crypto_sym_xform *xform,
+ dpaa2_sec_session *session)
+{
+ struct dpaa2_sec_auth_ctxt *ctxt = &session->ext_params.auth_ctxt;
+ struct alginfo authdata;
+ unsigned int bufsize;
+ struct ctxt_priv *priv;
+ struct sec_flow_context *flc;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* For SEC AUTH three descriptors are required for various stages */
+ priv = (struct ctxt_priv *)rte_zmalloc(NULL,
+ sizeof(struct ctxt_priv) + 3 *
+ sizeof(struct sec_flc_desc),
+ RTE_CACHE_LINE_SIZE);
+ if (priv == NULL) {
+ RTE_LOG(ERR, PMD, "No Memory for priv CTXT");
+ return -1;
+ }
+
+ flc = &priv->flc_desc[DESC_INITFINAL].flc;
+
+ session->auth_key.data = rte_zmalloc(NULL, xform->auth.key.length,
+ RTE_CACHE_LINE_SIZE);
+ if (session->auth_key.data == NULL) {
+ RTE_LOG(ERR, PMD, "No Memory for auth key");
+ rte_free(priv);
+ return -1;
+ }
+ session->auth_key.length = xform->auth.key.length;
+
+ memcpy(session->auth_key.data, xform->auth.key.data,
+ xform->auth.key.length);
+ authdata.key = (uint64_t)session->auth_key.data;
+ authdata.keylen = session->auth_key.length;
+ authdata.key_enc_flags = 0;
+ authdata.key_type = RTA_DATA_IMM;
+
+ switch (xform->auth.algo) {
+ case RTE_CRYPTO_AUTH_SHA1_HMAC:
+ authdata.algtype = OP_ALG_ALGSEL_SHA1;
+ authdata.algmode = OP_ALG_AAI_HMAC;
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA1_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_MD5_HMAC:
+ authdata.algtype = OP_ALG_ALGSEL_MD5;
+ authdata.algmode = OP_ALG_AAI_HMAC;
+ session->auth_alg = RTE_CRYPTO_AUTH_MD5_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_SHA256_HMAC:
+ authdata.algtype = OP_ALG_ALGSEL_SHA256;
+ authdata.algmode = OP_ALG_AAI_HMAC;
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA256_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_SHA384_HMAC:
+ authdata.algtype = OP_ALG_ALGSEL_SHA384;
+ authdata.algmode = OP_ALG_AAI_HMAC;
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA384_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ authdata.algtype = OP_ALG_ALGSEL_SHA512;
+ authdata.algmode = OP_ALG_AAI_HMAC;
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA512_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_SHA224_HMAC:
+ authdata.algtype = OP_ALG_ALGSEL_SHA224;
+ authdata.algmode = OP_ALG_AAI_HMAC;
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA224_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_AES_XCBC_MAC:
+ case RTE_CRYPTO_AUTH_AES_GCM:
+ case RTE_CRYPTO_AUTH_SNOW3G_UIA2:
+ case RTE_CRYPTO_AUTH_NULL:
+ case RTE_CRYPTO_AUTH_SHA1:
+ case RTE_CRYPTO_AUTH_SHA256:
+ case RTE_CRYPTO_AUTH_SHA512:
+ case RTE_CRYPTO_AUTH_SHA224:
+ case RTE_CRYPTO_AUTH_SHA384:
+ case RTE_CRYPTO_AUTH_MD5:
+ case RTE_CRYPTO_AUTH_AES_CCM:
+ case RTE_CRYPTO_AUTH_AES_GMAC:
+ case RTE_CRYPTO_AUTH_KASUMI_F9:
+ case RTE_CRYPTO_AUTH_AES_CMAC:
+ case RTE_CRYPTO_AUTH_AES_CBC_MAC:
+ case RTE_CRYPTO_AUTH_ZUC_EIA3:
+ RTE_LOG(ERR, PMD, "Crypto: Unsupported auth alg %u",
+ xform->auth.algo);
+ goto error_out;
+ default:
+ RTE_LOG(ERR, PMD, "Crypto: Undefined Auth specified %u\n",
+ xform->auth.algo);
+ goto error_out;
+ }
+ session->dir = (xform->auth.op == RTE_CRYPTO_AUTH_OP_GENERATE) ?
+ DIR_ENC : DIR_DEC;
+
+ bufsize = cnstr_shdsc_hmac(priv->flc_desc[DESC_INITFINAL].desc,
+ 1, 0, &authdata, !session->dir,
+ ctxt->trunc_len);
+
+ flc->word1_sdl = (uint8_t)bufsize;
+ flc->word2_rflc_31_0 = lower_32_bits(
+ (uint64_t)&(((struct dpaa2_sec_qp *)
+ dev->data->queue_pairs[0])->rx_vq));
+ flc->word3_rflc_63_32 = upper_32_bits(
+ (uint64_t)&(((struct dpaa2_sec_qp *)
+ dev->data->queue_pairs[0])->rx_vq));
+ session->ctxt = priv;
+
+ return 0;
+
+error_out:
+ rte_free(session->auth_key.data);
+ rte_free(priv);
+ return -1;
+}
+
+static int
+dpaa2_sec_aead_init(struct rte_cryptodev *dev,
+ struct rte_crypto_sym_xform *xform,
+ dpaa2_sec_session *session)
+{
+ struct dpaa2_sec_aead_ctxt *ctxt = &session->ext_params.aead_ctxt;
+ struct alginfo authdata, cipherdata;
+ unsigned int bufsize;
+ struct ctxt_priv *priv;
+ struct sec_flow_context *flc;
+ struct rte_crypto_cipher_xform *cipher_xform;
+ struct rte_crypto_auth_xform *auth_xform;
+ int err;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (session->ext_params.aead_ctxt.auth_cipher_text) {
+ cipher_xform = &xform->cipher;
+ auth_xform = &xform->next->auth;
+ session->ctxt_type =
+ (cipher_xform->op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
+ DPAA2_SEC_CIPHER_HASH : DPAA2_SEC_HASH_CIPHER;
+ } else {
+ cipher_xform = &xform->next->cipher;
+ auth_xform = &xform->auth;
+ session->ctxt_type =
+ (cipher_xform->op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
+ DPAA2_SEC_HASH_CIPHER : DPAA2_SEC_CIPHER_HASH;
+ }
+ /* For SEC AEAD only one descriptor is required */
+ priv = (struct ctxt_priv *)rte_zmalloc(NULL,
+ sizeof(struct ctxt_priv) + sizeof(struct sec_flc_desc),
+ RTE_CACHE_LINE_SIZE);
+ if (priv == NULL) {
+ RTE_LOG(ERR, PMD, "No Memory for priv CTXT");
+ return -1;
+ }
+
+ flc = &priv->flc_desc[0].flc;
+
+ session->cipher_key.data = rte_zmalloc(NULL, cipher_xform->key.length,
+ RTE_CACHE_LINE_SIZE);
+ if (session->cipher_key.data == NULL && cipher_xform->key.length > 0) {
+ RTE_LOG(ERR, PMD, "No Memory for cipher key");
+ rte_free(priv);
+ return -1;
+ }
+ session->cipher_key.length = cipher_xform->key.length;
+ session->auth_key.data = rte_zmalloc(NULL, auth_xform->key.length,
+ RTE_CACHE_LINE_SIZE);
+ if (session->auth_key.data == NULL && auth_xform->key.length > 0) {
+ RTE_LOG(ERR, PMD, "No Memory for auth key");
+ rte_free(session->cipher_key.data);
+ rte_free(priv);
+ return -1;
+ }
+ session->auth_key.length = auth_xform->key.length;
+ memcpy(session->cipher_key.data, cipher_xform->key.data,
+ cipher_xform->key.length);
+ memcpy(session->auth_key.data, auth_xform->key.data,
+ auth_xform->key.length);
+
+ ctxt->trunc_len = auth_xform->digest_length;
+ authdata.key = (uint64_t)session->auth_key.data;
+ authdata.keylen = session->auth_key.length;
+ authdata.key_enc_flags = 0;
+ authdata.key_type = RTA_DATA_IMM;
+
+ switch (auth_xform->algo) {
+ case RTE_CRYPTO_AUTH_SHA1_HMAC:
+ authdata.algtype = OP_ALG_ALGSEL_SHA1;
+ authdata.algmode = OP_ALG_AAI_HMAC;
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA1_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_MD5_HMAC:
+ authdata.algtype = OP_ALG_ALGSEL_MD5;
+ authdata.algmode = OP_ALG_AAI_HMAC;
+ session->auth_alg = RTE_CRYPTO_AUTH_MD5_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_SHA224_HMAC:
+ authdata.algtype = OP_ALG_ALGSEL_SHA224;
+ authdata.algmode = OP_ALG_AAI_HMAC;
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA224_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_SHA256_HMAC:
+ authdata.algtype = OP_ALG_ALGSEL_SHA256;
+ authdata.algmode = OP_ALG_AAI_HMAC;
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA256_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_SHA384_HMAC:
+ authdata.algtype = OP_ALG_ALGSEL_SHA384;
+ authdata.algmode = OP_ALG_AAI_HMAC;
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA384_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_SHA512_HMAC:
+ authdata.algtype = OP_ALG_ALGSEL_SHA512;
+ authdata.algmode = OP_ALG_AAI_HMAC;
+ session->auth_alg = RTE_CRYPTO_AUTH_SHA512_HMAC;
+ break;
+ case RTE_CRYPTO_AUTH_AES_XCBC_MAC:
+ case RTE_CRYPTO_AUTH_AES_GCM:
+ case RTE_CRYPTO_AUTH_SNOW3G_UIA2:
+ case RTE_CRYPTO_AUTH_NULL:
+ case RTE_CRYPTO_AUTH_SHA1:
+ case RTE_CRYPTO_AUTH_SHA256:
+ case RTE_CRYPTO_AUTH_SHA512:
+ case RTE_CRYPTO_AUTH_SHA224:
+ case RTE_CRYPTO_AUTH_SHA384:
+ case RTE_CRYPTO_AUTH_MD5:
+ case RTE_CRYPTO_AUTH_AES_CCM:
+ case RTE_CRYPTO_AUTH_AES_GMAC:
+ case RTE_CRYPTO_AUTH_KASUMI_F9:
+ case RTE_CRYPTO_AUTH_AES_CMAC:
+ case RTE_CRYPTO_AUTH_AES_CBC_MAC:
+ case RTE_CRYPTO_AUTH_ZUC_EIA3:
+ RTE_LOG(ERR, PMD, "Crypto: Unsupported auth alg %u",
+ auth_xform->algo);
+ goto error_out;
+ default:
+ RTE_LOG(ERR, PMD, "Crypto: Undefined Auth specified %u\n",
+ auth_xform->algo);
+ goto error_out;
+ }
+ cipherdata.key = (uint64_t)session->cipher_key.data;
+ cipherdata.keylen = session->cipher_key.length;
+ cipherdata.key_enc_flags = 0;
+ cipherdata.key_type = RTA_DATA_IMM;
+
+ switch (cipher_xform->algo) {
+ case RTE_CRYPTO_CIPHER_AES_CBC:
+ cipherdata.algtype = OP_ALG_ALGSEL_AES;
+ cipherdata.algmode = OP_ALG_AAI_CBC;
+ session->cipher_alg = RTE_CRYPTO_CIPHER_AES_CBC;
+ ctxt->iv.length = AES_CBC_IV_LEN;
+ break;
+ case RTE_CRYPTO_CIPHER_3DES_CBC:
+ cipherdata.algtype = OP_ALG_ALGSEL_3DES;
+ cipherdata.algmode = OP_ALG_AAI_CBC;
+ session->cipher_alg = RTE_CRYPTO_CIPHER_3DES_CBC;
+ ctxt->iv.length = TDES_CBC_IV_LEN;
+ break;
+ case RTE_CRYPTO_CIPHER_AES_GCM:
+ case RTE_CRYPTO_CIPHER_SNOW3G_UEA2:
+ case RTE_CRYPTO_CIPHER_NULL:
+ case RTE_CRYPTO_CIPHER_3DES_ECB:
+ case RTE_CRYPTO_CIPHER_AES_ECB:
+ case RTE_CRYPTO_CIPHER_AES_CTR:
+ case RTE_CRYPTO_CIPHER_AES_CCM:
+ case RTE_CRYPTO_CIPHER_KASUMI_F8:
+ RTE_LOG(ERR, PMD, "Crypto: Unsupported Cipher alg %u",
+ cipher_xform->algo);
+ goto error_out;
+ default:
+ RTE_LOG(ERR, PMD, "Crypto: Undefined Cipher specified %u\n",
+ cipher_xform->algo);
+ goto error_out;
+ }
+ session->dir = (cipher_xform->op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ?
+ DIR_ENC : DIR_DEC;
+
+ priv->flc_desc[0].desc[0] = cipherdata.keylen;
+ priv->flc_desc[0].desc[1] = authdata.keylen;
+ err = rta_inline_query(IPSEC_AUTH_VAR_AES_DEC_BASE_DESC_LEN,
+ MIN_JOB_DESC_SIZE,
+ (unsigned int *)priv->flc_desc[0].desc,
+ &priv->flc_desc[0].desc[2], 2);
+
+ if (err < 0) {
+ PMD_DRV_LOG(ERR, "Crypto: Incorrect key lengths");
+ goto error_out;
+ }
+ if (priv->flc_desc[0].desc[2] & 1) {
+ cipherdata.key_type = RTA_DATA_IMM;
+ } else {
+ cipherdata.key = DPAA2_VADDR_TO_IOVA(cipherdata.key);
+ cipherdata.key_type = RTA_DATA_PTR;
+ }
+ if (priv->flc_desc[0].desc[2] & (1 << 1)) {
+ authdata.key_type = RTA_DATA_IMM;
+ } else {
+ authdata.key = DPAA2_VADDR_TO_IOVA(authdata.key);
+ authdata.key_type = RTA_DATA_PTR;
+ }
+ priv->flc_desc[0].desc[0] = 0;
+ priv->flc_desc[0].desc[1] = 0;
+ priv->flc_desc[0].desc[2] = 0;
+
+ if (session->ctxt_type == DPAA2_SEC_CIPHER_HASH) {
+ bufsize = cnstr_shdsc_authenc(priv->flc_desc[0].desc, 1,
+ 0, &cipherdata, &authdata,
+ ctxt->iv.length,
+ ctxt->auth_only_len,
+ ctxt->trunc_len,
+ session->dir);
+ } else {
+ RTE_LOG(ERR, PMD, "Hash before cipher not supported");
+ goto error_out;
+ }
+
+ flc->word1_sdl = (uint8_t)bufsize;
+ flc->word2_rflc_31_0 = lower_32_bits(
+ (uint64_t)&(((struct dpaa2_sec_qp *)
+ dev->data->queue_pairs[0])->rx_vq));
+ flc->word3_rflc_63_32 = upper_32_bits(
+ (uint64_t)&(((struct dpaa2_sec_qp *)
+ dev->data->queue_pairs[0])->rx_vq));
+ session->ctxt = priv;
+
+ return 0;
+
+error_out:
+ rte_free(session->cipher_key.data);
+ rte_free(session->auth_key.data);
+ rte_free(priv);
+ return -1;
+}
+
+static void *
+dpaa2_sec_session_configure(struct rte_cryptodev *dev,
+ struct rte_crypto_sym_xform *xform, void *sess)
+{
+ dpaa2_sec_session *session = sess;
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (unlikely(sess == NULL)) {
+ RTE_LOG(ERR, PMD, "invalid session struct");
+ return NULL;
+ }
+ /* Cipher Only */
+ if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER && xform->next == NULL) {
+ session->ctxt_type = DPAA2_SEC_CIPHER;
+ dpaa2_sec_cipher_init(dev, xform, session);
+
+ /* Authentication Only */
+ } else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
+ xform->next == NULL) {
+ session->ctxt_type = DPAA2_SEC_AUTH;
+ dpaa2_sec_auth_init(dev, xform, session);
+
+ /* Cipher then Authenticate */
+ } else if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
+ xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
+ session->ext_params.aead_ctxt.auth_cipher_text = true;
+ dpaa2_sec_aead_init(dev, xform, session);
+
+ /* Authenticate then Cipher */
+ } else if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
+ xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER) {
+ session->ext_params.aead_ctxt.auth_cipher_text = false;
+ dpaa2_sec_aead_init(dev, xform, session);
+ } else {
+ RTE_LOG(ERR, PMD, "Invalid crypto type");
+ return NULL;
+ }
+
+ return session;
+}
+
+/** Clear the memory of session so it doesn't leave key material behind */
+static void
+dpaa2_sec_session_clear(struct rte_cryptodev *dev __rte_unused, void *sess)
+{
+ PMD_INIT_FUNC_TRACE();
+ dpaa2_sec_session *s = (dpaa2_sec_session *)sess;
+
+ if (s) {
+ rte_free(s->ctxt);
+ rte_free(s->cipher_key.data);
+ rte_free(s->auth_key.data);
+ memset(sess, 0, sizeof(dpaa2_sec_session));
+ }
+}
+
+static int
+dpaa2_sec_dev_configure(struct rte_cryptodev *dev __rte_unused,
+ struct rte_cryptodev_config *config __rte_unused)
+{
+ PMD_INIT_FUNC_TRACE();
+
+ return -ENOTSUP;
+}
+
+static int
+dpaa2_sec_dev_start(struct rte_cryptodev *dev)
+{
+ struct dpaa2_sec_dev_private *priv = dev->data->dev_private;
+ struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw;
+ struct dpseci_attr attr;
+ struct dpaa2_queue *dpaa2_q;
+ struct dpaa2_sec_qp **qp = (struct dpaa2_sec_qp **)
+ dev->data->queue_pairs;
+ struct dpseci_rx_queue_attr rx_attr;
+ struct dpseci_tx_queue_attr tx_attr;
+ int ret, i;
+
+ PMD_INIT_FUNC_TRACE();
+
+ memset(&attr, 0, sizeof(struct dpseci_attr));
+
+ ret = dpseci_enable(dpseci, CMD_PRI_LOW, priv->token);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "DPSECI with HW_ID = %d ENABLE FAILED\n",
+ priv->hw_id);
+ goto get_attr_failure;
+ }
+ ret = dpseci_get_attributes(dpseci, CMD_PRI_LOW, priv->token, &attr);
+ if (ret) {
+ PMD_INIT_LOG(ERR,
+ "DPSEC ATTRIBUTE READ FAILED, disabling DPSEC\n");
+ goto get_attr_failure;
+ }
+ for (i = 0; i < attr.num_rx_queues && qp[i]; i++) {
+ dpaa2_q = &qp[i]->rx_vq;
+ dpseci_get_rx_queue(dpseci, CMD_PRI_LOW, priv->token, i,
+ &rx_attr);
+ dpaa2_q->fqid = rx_attr.fqid;
+ PMD_INIT_LOG(DEBUG, "rx_fqid: %d", dpaa2_q->fqid);
+ }
+ for (i = 0; i < attr.num_tx_queues && qp[i]; i++) {
+ dpaa2_q = &qp[i]->tx_vq;
+ dpseci_get_tx_queue(dpseci, CMD_PRI_LOW, priv->token, i,
+ &tx_attr);
+ dpaa2_q->fqid = tx_attr.fqid;
+ PMD_INIT_LOG(DEBUG, "tx_fqid: %d", dpaa2_q->fqid);
+ }
+
+ return 0;
+get_attr_failure:
+ dpseci_disable(dpseci, CMD_PRI_LOW, priv->token);
+ return -1;
+}
+
+static void
+dpaa2_sec_dev_stop(struct rte_cryptodev *dev)
+{
+ struct dpaa2_sec_dev_private *priv = dev->data->dev_private;
+ struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw;
+ int ret;
+
+ PMD_INIT_FUNC_TRACE();
+
+ ret = dpseci_disable(dpseci, CMD_PRI_LOW, priv->token);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failure in disabling dpseci %d device",
+ priv->hw_id);
+ return;
+ }
+
+ ret = dpseci_reset(dpseci, CMD_PRI_LOW, priv->token);
+ if (ret < 0) {
+ PMD_INIT_LOG(ERR, "SEC Device cannot be reset:Error = %0x\n",
+ ret);
+ return;
+ }
+}
+
+static int
+dpaa2_sec_dev_close(struct rte_cryptodev *dev)
+{
+ struct dpaa2_sec_dev_private *priv = dev->data->dev_private;
+ struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw;
+ int ret;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* Function is reverse of dpaa2_sec_dev_init.
+ * It does the following:
+ * 1. Detach a DPSECI from attached resources i.e. buffer pools, dpbp_id
+ * 2. Close the DPSECI device
+ * 3. Free the allocated resources.
+ */
+
+ /*Close the device at underlying layer*/
+ ret = dpseci_close(dpseci, CMD_PRI_LOW, priv->token);
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Failure closing dpseci device with"
+ " error code %d\n", ret);
+ return -1;
+ }
+
+ /*Free the allocated memory for ethernet private data and dpseci*/
+ priv->hw = NULL;
+ free(dpseci);
+
+ return 0;
+}
+
+static void
+dpaa2_sec_dev_infos_get(struct rte_cryptodev *dev,
+ struct rte_cryptodev_info *info)
+{
+ struct dpaa2_sec_dev_private *internals = dev->data->dev_private;
+
+ PMD_INIT_FUNC_TRACE();
+ if (info != NULL) {
+ info->max_nb_queue_pairs = internals->max_nb_queue_pairs;
+ info->feature_flags = dev->feature_flags;
+ info->capabilities = dpaa2_sec_capabilities;
+ info->sym.max_nb_sessions = internals->max_nb_sessions;
+ info->dev_type = RTE_CRYPTODEV_DPAA2_SEC_PMD;
+ }
+}
+
+static
+void dpaa2_sec_stats_get(struct rte_cryptodev *dev,
+ struct rte_cryptodev_stats *stats)
+{
+ struct dpaa2_sec_dev_private *priv = dev->data->dev_private;
+ struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw;
+ struct dpseci_sec_counters counters = {0};
+ struct dpaa2_sec_qp **qp = (struct dpaa2_sec_qp **)
+ dev->data->queue_pairs;
+ int ret, i;
+
+ PMD_INIT_FUNC_TRACE();
+ if (stats == NULL) {
+ PMD_DRV_LOG(ERR, "invalid stats ptr NULL");
+ return;
+ }
+ for (i = 0; i < dev->data->nb_queue_pairs; i++) {
+ if (qp[i] == NULL) {
+ PMD_DRV_LOG(DEBUG, "Uninitialised queue pair");
+ continue;
+ }
+
+ stats->enqueued_count += qp[i]->tx_vq.tx_pkts;
+ stats->dequeued_count += qp[i]->rx_vq.rx_pkts;
+ stats->enqueue_err_count += qp[i]->tx_vq.err_pkts;
+ stats->dequeue_err_count += qp[i]->rx_vq.err_pkts;
+ }
+
+ ret = dpseci_get_sec_counters(dpseci, CMD_PRI_LOW, priv->token,
+ &counters);
+ if (ret) {
+ PMD_DRV_LOG(ERR, "dpseci_get_sec_counters failed\n");
+ } else {
+ PMD_DRV_LOG(INFO, "dpseci hw stats:"
+ "\n\tNumber of Requests Dequeued = %lu"
+ "\n\tNumber of Outbound Encrypt Requests = %lu"
+ "\n\tNumber of Inbound Decrypt Requests = %lu"
+ "\n\tNumber of Outbound Bytes Encrypted = %lu"
+ "\n\tNumber of Outbound Bytes Protected = %lu"
+ "\n\tNumber of Inbound Bytes Decrypted = %lu"
+ "\n\tNumber of Inbound Bytes Validated = %lu",
+ counters.dequeued_requests,
+ counters.ob_enc_requests,
+ counters.ib_dec_requests,
+ counters.ob_enc_bytes,
+ counters.ob_prot_bytes,
+ counters.ib_dec_bytes,
+ counters.ib_valid_bytes);
+ }
+}
+
+static
+void dpaa2_sec_stats_reset(struct rte_cryptodev *dev)
+{
+ int i;
+ struct dpaa2_sec_qp **qp = (struct dpaa2_sec_qp **)
+ (dev->data->queue_pairs);
+
+ PMD_INIT_FUNC_TRACE();
+
+ for (i = 0; i < dev->data->nb_queue_pairs; i++) {
+ if (qp[i] == NULL) {
+ PMD_DRV_LOG(DEBUG, "Uninitialised queue pair");
+ continue;
+ }
+ qp[i]->tx_vq.rx_pkts = 0;
+ qp[i]->tx_vq.tx_pkts = 0;
+ qp[i]->tx_vq.err_pkts = 0;
+ qp[i]->rx_vq.rx_pkts = 0;
+ qp[i]->rx_vq.tx_pkts = 0;
+ qp[i]->rx_vq.err_pkts = 0;
+ }
+}
+
+static struct rte_cryptodev_ops crypto_ops = {
+ .dev_configure = dpaa2_sec_dev_configure,
+ .dev_start = dpaa2_sec_dev_start,
+ .dev_stop = dpaa2_sec_dev_stop,
+ .dev_close = dpaa2_sec_dev_close,
+ .dev_infos_get = dpaa2_sec_dev_infos_get,
+ .stats_get = dpaa2_sec_stats_get,
+ .stats_reset = dpaa2_sec_stats_reset,
+ .queue_pair_setup = dpaa2_sec_queue_pair_setup,
+ .queue_pair_release = dpaa2_sec_queue_pair_release,
+ .queue_pair_start = dpaa2_sec_queue_pair_start,
+ .queue_pair_stop = dpaa2_sec_queue_pair_stop,
+ .queue_pair_count = dpaa2_sec_queue_pair_count,
+ .session_get_size = dpaa2_sec_session_get_size,
+ .session_initialize = dpaa2_sec_session_initialize,
+ .session_configure = dpaa2_sec_session_configure,
+ .session_clear = dpaa2_sec_session_clear,
+};
+
+static int
+dpaa2_sec_uninit(const struct rte_cryptodev_driver *crypto_drv __rte_unused,
+ struct rte_cryptodev *dev)
+{
+ PMD_INIT_LOG(INFO, "Closing DPAA2_SEC device %s on numa socket %u\n",
+ dev->data->name, rte_socket_id());
+
+ return 0;
+}
+
+static int
+dpaa2_sec_dev_init(struct rte_cryptodev *cryptodev)
+{
+ struct dpaa2_sec_dev_private *internals;
+ struct rte_device *dev = cryptodev->device;
+ struct rte_dpaa2_device *dpaa2_dev;
+ struct fsl_mc_io *dpseci;
+ uint16_t token;
+ struct dpseci_attr attr;
+ int retcode, hw_id;
+
+ PMD_INIT_FUNC_TRACE();
+ dpaa2_dev = container_of(dev, struct rte_dpaa2_device, device);
+ if (dpaa2_dev == NULL) {
+ PMD_INIT_LOG(ERR, "dpaa2_device not found\n");
+ return -1;
+ }
+ hw_id = dpaa2_dev->object_id;
+
+ cryptodev->dev_type = RTE_CRYPTODEV_DPAA2_SEC_PMD;
+ cryptodev->dev_ops = &crypto_ops;
+
+ cryptodev->enqueue_burst = dpaa2_sec_enqueue_burst;
+ cryptodev->dequeue_burst = dpaa2_sec_dequeue_burst;
+ cryptodev->feature_flags = RTE_CRYPTODEV_FF_SYMMETRIC_CRYPTO |
+ RTE_CRYPTODEV_FF_HW_ACCELERATED |
+ RTE_CRYPTODEV_FF_SYM_OPERATION_CHAINING;
+
+ internals = cryptodev->data->dev_private;
+ internals->max_nb_sessions = RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS;
+
+ /*
+ * For secondary processes, we don't initialise any further as primary
+ * has already done this work. Only check we don't need a different
+ * RX function
+ */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+ PMD_INIT_LOG(DEBUG, "Device already init by primary process");
+ return 0;
+ }
+ /*Open the rte device via MC and save the handle for further use*/
+ dpseci = (struct fsl_mc_io *)rte_calloc(NULL, 1,
+ sizeof(struct fsl_mc_io), 0);
+ if (!dpseci) {
+ PMD_INIT_LOG(ERR,
+ "Error in allocating the memory for dpsec object");
+ return -1;
+ }
+ dpseci->regs = rte_mcp_ptr_list[0];
+
+ retcode = dpseci_open(dpseci, CMD_PRI_LOW, hw_id, &token);
+ if (retcode != 0) {
+ PMD_INIT_LOG(ERR, "Cannot open the dpsec device: Error = %x",
+ retcode);
+ goto init_error;
+ }
+ retcode = dpseci_get_attributes(dpseci, CMD_PRI_LOW, token, &attr);
+ if (retcode != 0) {
+ PMD_INIT_LOG(ERR,
+ "Cannot get dpsec device attributed: Error = %x",
+ retcode);
+ goto init_error;
+ }
+ sprintf(cryptodev->data->name, "dpsec-%u", hw_id);
+
+ internals->max_nb_queue_pairs = attr.num_tx_queues;
+ cryptodev->data->nb_queue_pairs = internals->max_nb_queue_pairs;
+ internals->hw = dpseci;
+ internals->token = token;
+
+ PMD_INIT_LOG(DEBUG, "driver %s: created\n", cryptodev->data->name);
+ return 0;
+
+init_error:
+ PMD_INIT_LOG(ERR, "driver %s: create failed\n", cryptodev->data->name);
+
+ /* dpaa2_sec_uninit(crypto_dev_name); */
+ return -EFAULT;
+}
+
+static int
+cryptodev_dpaa2_sec_probe(struct rte_dpaa2_driver *dpaa2_drv,
+ struct rte_dpaa2_device *dpaa2_dev)
+{
+ struct rte_cryptodev *cryptodev;
+ char cryptodev_name[RTE_CRYPTODEV_NAME_MAX_LEN];
+
+ int retval;
+
+ sprintf(cryptodev_name, "dpsec-%d", dpaa2_dev->object_id);
+
+ cryptodev = rte_cryptodev_pmd_allocate(cryptodev_name, rte_socket_id());
+ if (cryptodev == NULL)
+ return -ENOMEM;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ cryptodev->data->dev_private = rte_zmalloc_socket(
+ "cryptodev private structure",
+ sizeof(struct dpaa2_sec_dev_private),
+ RTE_CACHE_LINE_SIZE,
+ rte_socket_id());
+
+ if (cryptodev->data->dev_private == NULL)
+ rte_panic("Cannot allocate memzone for private "
+ "device data");
+ }
+
+ dpaa2_dev->cryptodev = cryptodev;
+ cryptodev->device = &dpaa2_dev->device;
+ cryptodev->driver = (struct rte_cryptodev_driver *)dpaa2_drv;
+
+ /* init user callbacks */
+ TAILQ_INIT(&(cryptodev->link_intr_cbs));
+
+ /* Invoke PMD device initialization function */
+ retval = dpaa2_sec_dev_init(cryptodev);
+ if (retval == 0)
+ return 0;
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ rte_free(cryptodev->data->dev_private);
+
+ cryptodev->attached = RTE_CRYPTODEV_DETACHED;
+
+ return -ENXIO;
+}
+
+static int
+cryptodev_dpaa2_sec_remove(struct rte_dpaa2_device *dpaa2_dev)
+{
+ struct rte_cryptodev *cryptodev;
+ int ret;
+
+ cryptodev = dpaa2_dev->cryptodev;
+ if (cryptodev == NULL)
+ return -ENODEV;
+
+ ret = dpaa2_sec_uninit(NULL, cryptodev);
+ if (ret)
+ return ret;
+
+ /* free crypto device */
+ rte_cryptodev_pmd_release_device(cryptodev);
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ rte_free(cryptodev->data->dev_private);
+
+ cryptodev->device = NULL;
+ cryptodev->driver = NULL;
+ cryptodev->data = NULL;
+
+ return 0;
+}
+
+static struct rte_dpaa2_driver rte_dpaa2_sec_driver = {
+ .drv_type = DPAA2_MC_DPSECI_DEVID,
+ .driver = {
+ .name = "DPAA2 SEC PMD"
+ },
+ .probe = cryptodev_dpaa2_sec_probe,
+ .remove = cryptodev_dpaa2_sec_remove,
+};
+
+RTE_PMD_REGISTER_DPAA2(dpaa2_sec_pmd, rte_dpaa2_sec_driver);
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h
new file mode 100644
index 00000000..03d4c703
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_logs.h
@@ -0,0 +1,70 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (c) 2016 NXP. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Freescale Semiconductor, Inc nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _DPAA2_SEC_LOGS_H_
+#define _DPAA2_SEC_LOGS_H_
+
+#define PMD_INIT_LOG(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args)
+
+#ifdef RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT
+#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
+#else
+#define PMD_INIT_FUNC_TRACE() do { } while (0)
+#endif
+
+#ifdef RTE_LIBRTE_DPAA2_SEC_DEBUG_RX
+#define PMD_RX_LOG(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
+#else
+#define PMD_RX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#ifdef RTE_LIBRTE_DPAA2_SEC_DEBUG_TX
+#define PMD_TX_LOG(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ## args)
+#else
+#define PMD_TX_LOG(level, fmt, args...) do { } while (0)
+#endif
+
+#ifdef RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER
+#define PMD_DRV_LOG_RAW(level, fmt, args...) \
+ RTE_LOG(level, PMD, "%s(): " fmt, __func__, ## args)
+#else
+#define PMD_DRV_LOG_RAW(level, fmt, args...) do { } while (0)
+#endif
+
+#define PMD_DRV_LOG(level, fmt, args...) \
+ PMD_DRV_LOG_RAW(level, fmt "\n", ## args)
+
+#endif /* _DPAA2_SEC_LOGS_H_ */
diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
new file mode 100644
index 00000000..f5c61694
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_priv.h
@@ -0,0 +1,368 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (c) 2016 NXP. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Freescale Semiconductor, Inc nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_DPAA2_SEC_PMD_PRIVATE_H_
+#define _RTE_DPAA2_SEC_PMD_PRIVATE_H_
+
+#define MAX_QUEUES 64
+#define MAX_DESC_SIZE 64
+/** private data structure for each DPAA2_SEC device */
+struct dpaa2_sec_dev_private {
+ void *mc_portal; /**< MC Portal for configuring this device */
+ void *hw; /**< Hardware handle for this device.Used by NADK framework */
+ int32_t hw_id; /**< An unique ID of this device instance */
+ int32_t vfio_fd; /**< File descriptor received via VFIO */
+ uint16_t token; /**< Token required by DPxxx objects */
+ unsigned int max_nb_queue_pairs;
+ /**< Max number of queue pairs supported by device */
+ unsigned int max_nb_sessions;
+ /**< Max number of sessions supported by device */
+};
+
+struct dpaa2_sec_qp {
+ struct dpaa2_queue rx_vq;
+ struct dpaa2_queue tx_vq;
+};
+
+enum shr_desc_type {
+ DESC_UPDATE,
+ DESC_FINAL,
+ DESC_INITFINAL,
+};
+
+#define DIR_ENC 1
+#define DIR_DEC 0
+
+/* SEC Flow Context Descriptor */
+struct sec_flow_context {
+ /* word 0 */
+ uint16_t word0_sdid; /* 11-0 SDID */
+ uint16_t word0_res; /* 31-12 reserved */
+
+ /* word 1 */
+ uint8_t word1_sdl; /* 5-0 SDL */
+ /* 7-6 reserved */
+
+ uint8_t word1_bits_15_8; /* 11-8 CRID */
+ /* 14-12 reserved */
+ /* 15 CRJD */
+
+ uint8_t word1_bits23_16; /* 16 EWS */
+ /* 17 DAC */
+ /* 18,19,20 ? */
+ /* 23-21 reserved */
+
+ uint8_t word1_bits31_24; /* 24 RSC */
+ /* 25 RBMT */
+ /* 31-26 reserved */
+
+ /* word 2 RFLC[31-0] */
+ uint32_t word2_rflc_31_0;
+
+ /* word 3 RFLC[63-32] */
+ uint32_t word3_rflc_63_32;
+
+ /* word 4 */
+ uint16_t word4_iicid; /* 15-0 IICID */
+ uint16_t word4_oicid; /* 31-16 OICID */
+
+ /* word 5 */
+ uint32_t word5_ofqid:24; /* 23-0 OFQID */
+ uint32_t word5_31_24:8;
+ /* 24 OSC */
+ /* 25 OBMT */
+ /* 29-26 reserved */
+ /* 31-30 ICR */
+
+ /* word 6 */
+ uint32_t word6_oflc_31_0;
+
+ /* word 7 */
+ uint32_t word7_oflc_63_32;
+
+ /* Word 8-15 storage profiles */
+ uint16_t dl; /**< DataLength(correction) */
+ uint16_t reserved; /**< reserved */
+ uint16_t dhr; /**< DataHeadRoom(correction) */
+ uint16_t mode_bits; /**< mode bits */
+ uint16_t bpv0; /**< buffer pool0 valid */
+ uint16_t bpid0; /**< Bypass Memory Translation */
+ uint16_t bpv1; /**< buffer pool1 valid */
+ uint16_t bpid1; /**< Bypass Memory Translation */
+ uint64_t word_12_15[2]; /**< word 12-15 are reserved */
+};
+
+struct sec_flc_desc {
+ struct sec_flow_context flc;
+ uint32_t desc[MAX_DESC_SIZE];
+};
+
+struct ctxt_priv {
+ struct sec_flc_desc flc_desc[0];
+};
+
+enum dpaa2_sec_op_type {
+ DPAA2_SEC_NONE, /*!< No Cipher operations*/
+ DPAA2_SEC_CIPHER,/*!< CIPHER operations */
+ DPAA2_SEC_AUTH, /*!< Authentication Operations */
+ DPAA2_SEC_CIPHER_HASH, /*!< Authenticated Encryption with
+ * associated data
+ */
+ DPAA2_SEC_HASH_CIPHER, /*!< Encryption with Authenticated
+ * associated data
+ */
+ DPAA2_SEC_IPSEC, /*!< IPSEC protocol operations*/
+ DPAA2_SEC_PDCP, /*!< PDCP protocol operations*/
+ DPAA2_SEC_PKC, /*!< Public Key Cryptographic Operations */
+ DPAA2_SEC_MAX
+};
+
+struct dpaa2_sec_cipher_ctxt {
+ struct {
+ uint8_t *data;
+ uint16_t length;
+ } iv; /**< Initialisation vector parameters */
+ uint8_t *init_counter; /*!< Set initial counter for CTR mode */
+};
+
+struct dpaa2_sec_auth_ctxt {
+ uint8_t trunc_len; /*!< Length for output ICV, should
+ * be 0 if no truncation required
+ */
+};
+
+struct dpaa2_sec_aead_ctxt {
+ struct {
+ uint8_t *data;
+ uint16_t length;
+ } iv; /**< Initialisation vector parameters */
+ uint16_t auth_only_len; /*!< Length of data for Auth only */
+ uint8_t auth_cipher_text; /**< Authenticate/cipher ordering */
+ uint8_t trunc_len; /*!< Length for output ICV, should
+ * be 0 if no truncation required
+ */
+};
+
+typedef struct dpaa2_sec_session_entry {
+ void *ctxt;
+ uint8_t ctxt_type;
+ uint8_t dir; /*!< Operation Direction */
+ enum rte_crypto_cipher_algorithm cipher_alg; /*!< Cipher Algorithm*/
+ enum rte_crypto_auth_algorithm auth_alg; /*!< Authentication Algorithm*/
+ struct {
+ uint8_t *data; /**< pointer to key data */
+ size_t length; /**< key length in bytes */
+ } cipher_key;
+ struct {
+ uint8_t *data; /**< pointer to key data */
+ size_t length; /**< key length in bytes */
+ } auth_key;
+ uint8_t status;
+ union {
+ struct dpaa2_sec_cipher_ctxt cipher_ctxt;
+ struct dpaa2_sec_auth_ctxt auth_ctxt;
+ struct dpaa2_sec_aead_ctxt aead_ctxt;
+ } ext_params;
+} dpaa2_sec_session;
+
+static const struct rte_cryptodev_capabilities dpaa2_sec_capabilities[] = {
+ { /* MD5 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA1 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 20,
+ .max = 20,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA224 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 28,
+ .max = 28,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA256 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
+ .block_size = 64,
+ .key_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 32,
+ .max = 32,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA384 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 128,
+ .max = 128,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 48,
+ .max = 48,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* SHA512 HMAC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
+ {.auth = {
+ .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
+ .block_size = 128,
+ .key_size = {
+ .min = 128,
+ .max = 128,
+ .increment = 0
+ },
+ .digest_size = {
+ .min = 64,
+ .max = 64,
+ .increment = 0
+ },
+ .aad_size = { 0 }
+ }, }
+ }, }
+ },
+ { /* AES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .block_size = 16,
+ .key_size = {
+ .min = 16,
+ .max = 32,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 16,
+ .max = 16,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+ { /* 3DES CBC */
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+ {.sym = {
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
+ {.cipher = {
+ .algo = RTE_CRYPTO_CIPHER_3DES_CBC,
+ .block_size = 8,
+ .key_size = {
+ .min = 16,
+ .max = 24,
+ .increment = 8
+ },
+ .iv_size = {
+ .min = 8,
+ .max = 8,
+ .increment = 0
+ }
+ }, }
+ }, }
+ },
+
+ RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+#endif /* _RTE_DPAA2_SEC_PMD_PRIVATE_H_ */
diff --git a/drivers/crypto/dpaa2_sec/hw/compat.h b/drivers/crypto/dpaa2_sec/hw/compat.h
new file mode 100644
index 00000000..11fdaa8e
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/compat.h
@@ -0,0 +1,157 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_COMPAT_H__
+#define __RTA_COMPAT_H__
+
+#include <stdint.h>
+#include <errno.h>
+
+#ifdef __GLIBC__
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <rte_byteorder.h>
+
+#ifndef __BYTE_ORDER__
+#error "Undefined endianness"
+#endif
+
+#else
+#error Environment not supported!
+#endif
+
+#ifndef __always_inline
+#define __always_inline (inline __attribute__((always_inline)))
+#endif
+
+#ifndef __always_unused
+#define __always_unused __attribute__((unused))
+#endif
+
+#ifndef __maybe_unused
+#define __maybe_unused __attribute__((unused))
+#endif
+
+#if defined(__GLIBC__) && !defined(pr_debug)
+#if !defined(SUPPRESS_PRINTS) && defined(RTA_DEBUG)
+#define pr_debug(fmt, ...) \
+ RTE_LOG(DEBUG, PMD, "%s(): " fmt "\n", __func__, ##__VA_ARGS__)
+#else
+#define pr_debug(fmt, ...) do { } while (0)
+#endif
+#endif /* pr_debug */
+
+#if defined(__GLIBC__) && !defined(pr_err)
+#if !defined(SUPPRESS_PRINTS)
+#define pr_err(fmt, ...) \
+ RTE_LOG(ERR, PMD, "%s(): " fmt "\n", __func__, ##__VA_ARGS__)
+#else
+#define pr_err(fmt, ...) do { } while (0)
+#endif
+#endif /* pr_err */
+
+#if defined(__GLIBC__) && !defined(pr_warn)
+#if !defined(SUPPRESS_PRINTS)
+#define pr_warn(fmt, ...) \
+ RTE_LOG(WARNING, PMD, "%s(): " fmt "\n", __func__, ##__VA_ARGS__)
+#else
+#define pr_warn(fmt, ...) do { } while (0)
+#endif
+#endif /* pr_warn */
+
+/**
+ * ARRAY_SIZE - returns the number of elements in an array
+ * @x: array
+ */
+#ifndef ARRAY_SIZE
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#endif
+
+#ifndef ALIGN
+#define ALIGN(x, a) (((x) + ((__typeof__(x))(a) - 1)) & \
+ ~((__typeof__(x))(a) - 1))
+#endif
+
+#ifndef BIT
+#define BIT(nr) (1UL << (nr))
+#endif
+
+#ifndef upper_32_bits
+/**
+ * upper_32_bits - return bits 32-63 of a number
+ * @n: the number we're accessing
+ */
+#define upper_32_bits(n) ((uint32_t)(((n) >> 16) >> 16))
+#endif
+
+#ifndef lower_32_bits
+/**
+ * lower_32_bits - return bits 0-31 of a number
+ * @n: the number we're accessing
+ */
+#define lower_32_bits(n) ((uint32_t)(n))
+#endif
+
+/* Use Linux naming convention */
+#ifdef __GLIBC__
+ #define swab16(x) rte_bswap16(x)
+ #define swab32(x) rte_bswap32(x)
+ #define swab64(x) rte_bswap64(x)
+ /* Define cpu_to_be32 macro if not defined in the build environment */
+ #if !defined(cpu_to_be32)
+ #if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ #define cpu_to_be32(x) (x)
+ #else
+ #define cpu_to_be32(x) swab32(x)
+ #endif
+ #endif
+ /* Define cpu_to_le32 macro if not defined in the build environment */
+ #if !defined(cpu_to_le32)
+ #if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ #define cpu_to_le32(x) swab32(x)
+ #else
+ #define cpu_to_le32(x) (x)
+ #endif
+ #endif
+#endif
+
+#endif /* __RTA_COMPAT_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/desc.h b/drivers/crypto/dpaa2_sec/hw/desc.h
new file mode 100644
index 00000000..5185be22
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/desc.h
@@ -0,0 +1,2601 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * SEC descriptor composition header.
+ * Definitions to support SEC descriptor instruction generation
+ */
+
+#ifndef __RTA_DESC_H__
+#define __RTA_DESC_H__
+
+/* hw/compat.h is not delivered in kernel */
+#ifndef __KERNEL__
+#include "hw/compat.h"
+#endif
+
+/* Max size of any SEC descriptor in 32-bit words, inclusive of header */
+#define MAX_CAAM_DESCSIZE 64
+
+#define CAAM_CMD_SZ sizeof(uint32_t)
+#define CAAM_PTR_SZ sizeof(dma_addr_t)
+#define CAAM_DESC_BYTES_MAX (CAAM_CMD_SZ * MAX_CAAM_DESCSIZE)
+#define DESC_JOB_IO_LEN (CAAM_CMD_SZ * 5 + CAAM_PTR_SZ * 3)
+
+/* Block size of any entity covered/uncovered with a KEK/TKEK */
+#define KEK_BLOCKSIZE 16
+
+/*
+ * Supported descriptor command types as they show up
+ * inside a descriptor command word.
+ */
+#define CMD_SHIFT 27
+#define CMD_MASK (0x1f << CMD_SHIFT)
+
+#define CMD_KEY (0x00 << CMD_SHIFT)
+#define CMD_SEQ_KEY (0x01 << CMD_SHIFT)
+#define CMD_LOAD (0x02 << CMD_SHIFT)
+#define CMD_SEQ_LOAD (0x03 << CMD_SHIFT)
+#define CMD_FIFO_LOAD (0x04 << CMD_SHIFT)
+#define CMD_SEQ_FIFO_LOAD (0x05 << CMD_SHIFT)
+#define CMD_MOVEDW (0x06 << CMD_SHIFT)
+#define CMD_MOVEB (0x07 << CMD_SHIFT)
+#define CMD_STORE (0x0a << CMD_SHIFT)
+#define CMD_SEQ_STORE (0x0b << CMD_SHIFT)
+#define CMD_FIFO_STORE (0x0c << CMD_SHIFT)
+#define CMD_SEQ_FIFO_STORE (0x0d << CMD_SHIFT)
+#define CMD_MOVE_LEN (0x0e << CMD_SHIFT)
+#define CMD_MOVE (0x0f << CMD_SHIFT)
+#define CMD_OPERATION ((uint32_t)(0x10 << CMD_SHIFT))
+#define CMD_SIGNATURE ((uint32_t)(0x12 << CMD_SHIFT))
+#define CMD_JUMP ((uint32_t)(0x14 << CMD_SHIFT))
+#define CMD_MATH ((uint32_t)(0x15 << CMD_SHIFT))
+#define CMD_DESC_HDR ((uint32_t)(0x16 << CMD_SHIFT))
+#define CMD_SHARED_DESC_HDR ((uint32_t)(0x17 << CMD_SHIFT))
+#define CMD_MATHI ((uint32_t)(0x1d << CMD_SHIFT))
+#define CMD_SEQ_IN_PTR ((uint32_t)(0x1e << CMD_SHIFT))
+#define CMD_SEQ_OUT_PTR ((uint32_t)(0x1f << CMD_SHIFT))
+
+/* General-purpose class selector for all commands */
+#define CLASS_SHIFT 25
+#define CLASS_MASK (0x03 << CLASS_SHIFT)
+
+#define CLASS_NONE (0x00 << CLASS_SHIFT)
+#define CLASS_1 (0x01 << CLASS_SHIFT)
+#define CLASS_2 (0x02 << CLASS_SHIFT)
+#define CLASS_BOTH (0x03 << CLASS_SHIFT)
+
+/* ICV Check bits for Algo Operation command */
+#define ICV_CHECK_DISABLE 0
+#define ICV_CHECK_ENABLE 1
+
+/* Encap Mode check bits for Algo Operation command */
+#define DIR_ENC 1
+#define DIR_DEC 0
+
+/*
+ * Descriptor header command constructs
+ * Covers shared, job, and trusted descriptor headers
+ */
+
+/*
+ * Extended Job Descriptor Header
+ */
+#define HDR_EXT BIT(24)
+
+/*
+ * Read input frame as soon as possible (SHR HDR)
+ */
+#define HDR_RIF BIT(25)
+
+/*
+ * Require SEQ LIODN to be the Same (JOB HDR)
+ */
+#define HDR_RSLS BIT(25)
+
+/*
+ * Do Not Run - marks a descriptor not executable if there was
+ * a preceding error somewhere
+ */
+#define HDR_DNR BIT(24)
+
+/*
+ * ONE - should always be set. Combination of ONE (always
+ * set) and ZRO (always clear) forms an endianness sanity check
+ */
+#define HDR_ONE BIT(23)
+#define HDR_ZRO BIT(15)
+
+/* Start Index or SharedDesc Length */
+#define HDR_START_IDX_SHIFT 16
+#define HDR_START_IDX_MASK (0x3f << HDR_START_IDX_SHIFT)
+
+/* If shared descriptor header, 6-bit length */
+#define HDR_DESCLEN_SHR_MASK 0x3f
+
+/* If non-shared header, 7-bit length */
+#define HDR_DESCLEN_MASK 0x7f
+
+/* This is a TrustedDesc (if not SharedDesc) */
+#define HDR_TRUSTED BIT(14)
+
+/* Make into TrustedDesc (if not SharedDesc) */
+#define HDR_MAKE_TRUSTED BIT(13)
+
+/* Clear Input FiFO (if SharedDesc) */
+#define HDR_CLEAR_IFIFO BIT(13)
+
+/* Save context if self-shared (if SharedDesc) */
+#define HDR_SAVECTX BIT(12)
+
+/* Next item points to SharedDesc */
+#define HDR_SHARED BIT(12)
+
+/*
+ * Reverse Execution Order - execute JobDesc first, then
+ * execute SharedDesc (normally SharedDesc goes first).
+ */
+#define HDR_REVERSE BIT(11)
+
+/* Propagate DNR property to SharedDesc */
+#define HDR_PROP_DNR BIT(11)
+
+/* DECO Select Valid */
+#define HDR_EXT_DSEL_VALID BIT(7)
+
+/* Fake trusted descriptor */
+#define HDR_EXT_FTD BIT(8)
+
+/* JobDesc/SharedDesc share property */
+#define HDR_SD_SHARE_SHIFT 8
+#define HDR_SD_SHARE_MASK (0x03 << HDR_SD_SHARE_SHIFT)
+#define HDR_JD_SHARE_SHIFT 8
+#define HDR_JD_SHARE_MASK (0x07 << HDR_JD_SHARE_SHIFT)
+
+#define HDR_SHARE_NEVER (0x00 << HDR_SD_SHARE_SHIFT)
+#define HDR_SHARE_WAIT (0x01 << HDR_SD_SHARE_SHIFT)
+#define HDR_SHARE_SERIAL (0x02 << HDR_SD_SHARE_SHIFT)
+#define HDR_SHARE_ALWAYS (0x03 << HDR_SD_SHARE_SHIFT)
+#define HDR_SHARE_DEFER (0x04 << HDR_SD_SHARE_SHIFT)
+
+/* JobDesc/SharedDesc descriptor length */
+#define HDR_JD_LENGTH_MASK 0x7f
+#define HDR_SD_LENGTH_MASK 0x3f
+
+/*
+ * KEY/SEQ_KEY Command Constructs
+ */
+
+/* Key Destination Class: 01 = Class 1, 02 - Class 2 */
+#define KEY_DEST_CLASS_SHIFT 25
+#define KEY_DEST_CLASS_MASK (0x03 << KEY_DEST_CLASS_SHIFT)
+#define KEY_DEST_CLASS1 (1 << KEY_DEST_CLASS_SHIFT)
+#define KEY_DEST_CLASS2 (2 << KEY_DEST_CLASS_SHIFT)
+
+/* Scatter-Gather Table/Variable Length Field */
+#define KEY_SGF BIT(24)
+#define KEY_VLF BIT(24)
+
+/* Immediate - Key follows command in the descriptor */
+#define KEY_IMM BIT(23)
+
+/*
+ * Already in Input Data FIFO - the Input Data Sequence is not read, since it is
+ * already in the Input Data FIFO.
+ */
+#define KEY_AIDF BIT(23)
+
+/*
+ * Encrypted - Key is encrypted either with the KEK, or
+ * with the TDKEK if this descriptor is trusted
+ */
+#define KEY_ENC BIT(22)
+
+/*
+ * No Write Back - Do not allow key to be FIFO STOREd
+ */
+#define KEY_NWB BIT(21)
+
+/*
+ * Enhanced Encryption of Key
+ */
+#define KEY_EKT BIT(20)
+
+/*
+ * Encrypted with Trusted Key
+ */
+#define KEY_TK BIT(15)
+
+/*
+ * Plaintext Store
+ */
+#define KEY_PTS BIT(14)
+
+/*
+ * KDEST - Key Destination: 0 - class key register,
+ * 1 - PKHA 'e', 2 - AFHA Sbox, 3 - MDHA split key
+ */
+#define KEY_DEST_SHIFT 16
+#define KEY_DEST_MASK (0x03 << KEY_DEST_SHIFT)
+
+#define KEY_DEST_CLASS_REG (0x00 << KEY_DEST_SHIFT)
+#define KEY_DEST_PKHA_E (0x01 << KEY_DEST_SHIFT)
+#define KEY_DEST_AFHA_SBOX (0x02 << KEY_DEST_SHIFT)
+#define KEY_DEST_MDHA_SPLIT (0x03 << KEY_DEST_SHIFT)
+
+/* Length in bytes */
+#define KEY_LENGTH_MASK 0x000003ff
+
+/*
+ * LOAD/SEQ_LOAD/STORE/SEQ_STORE Command Constructs
+ */
+
+/*
+ * Load/Store Destination: 0 = class independent CCB,
+ * 1 = class 1 CCB, 2 = class 2 CCB, 3 = DECO
+ */
+#define LDST_CLASS_SHIFT 25
+#define LDST_CLASS_MASK (0x03 << LDST_CLASS_SHIFT)
+#define LDST_CLASS_IND_CCB (0x00 << LDST_CLASS_SHIFT)
+#define LDST_CLASS_1_CCB (0x01 << LDST_CLASS_SHIFT)
+#define LDST_CLASS_2_CCB (0x02 << LDST_CLASS_SHIFT)
+#define LDST_CLASS_DECO (0x03 << LDST_CLASS_SHIFT)
+
+/* Scatter-Gather Table/Variable Length Field */
+#define LDST_SGF BIT(24)
+#define LDST_VLF BIT(24)
+
+/* Immediate - Key follows this command in descriptor */
+#define LDST_IMM_MASK 1
+#define LDST_IMM_SHIFT 23
+#define LDST_IMM BIT(23)
+
+/* SRC/DST - Destination for LOAD, Source for STORE */
+#define LDST_SRCDST_SHIFT 16
+#define LDST_SRCDST_MASK (0x7f << LDST_SRCDST_SHIFT)
+
+#define LDST_SRCDST_BYTE_CONTEXT (0x20 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_BYTE_KEY (0x40 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_BYTE_INFIFO (0x7c << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_BYTE_OUTFIFO (0x7e << LDST_SRCDST_SHIFT)
+
+#define LDST_SRCDST_WORD_MODE_REG (0x00 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_JQCTRL (0x00 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_KEYSZ_REG (0x01 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_JQDAR (0x01 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DATASZ_REG (0x02 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_STAT (0x02 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_ICVSZ_REG (0x03 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_BYTE_DCHKSM (0x03 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_PID (0x04 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_CHACTRL (0x06 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECOCTRL (0x06 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_IRQCTRL (0x07 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_PCLOVRD (0x07 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_CLRW (0x08 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_MATH0 (0x08 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_STAT (0x09 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_MATH1 (0x09 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_MATH2 (0x0a << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_AAD_SZ (0x0b << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DECO_MATH3 (0x0b << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_CLASS1_IV_SZ (0x0c << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_ALTDS_CLASS1 (0x0f << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_PKHA_A_SZ (0x10 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_GTR (0x10 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_PKHA_B_SZ (0x11 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_PKHA_N_SZ (0x12 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_PKHA_E_SZ (0x13 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_CLASS_CTX (0x20 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_STR (0x20 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DESCBUF (0x40 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DESCBUF_JOB (0x41 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DESCBUF_SHARED (0x42 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DESCBUF_JOB_WE (0x45 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_DESCBUF_SHARED_WE (0x46 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_INFO_FIFO_SZL (0x70 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_INFO_FIFO_SZM (0x71 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_INFO_FIFO_L (0x72 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_INFO_FIFO_M (0x73 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_SZL (0x74 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_SZM (0x75 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_IFNSR (0x76 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_OFNSR (0x77 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_BYTE_ALTSOURCE (0x78 << LDST_SRCDST_SHIFT)
+#define LDST_SRCDST_WORD_INFO_FIFO (0x7a << LDST_SRCDST_SHIFT)
+
+/* Offset in source/destination */
+#define LDST_OFFSET_SHIFT 8
+#define LDST_OFFSET_MASK (0xff << LDST_OFFSET_SHIFT)
+
+/* LDOFF definitions used when DST = LDST_SRCDST_WORD_DECOCTRL */
+/* These could also be shifted by LDST_OFFSET_SHIFT - this reads better */
+#define LDOFF_CHG_SHARE_SHIFT 0
+#define LDOFF_CHG_SHARE_MASK (0x3 << LDOFF_CHG_SHARE_SHIFT)
+#define LDOFF_CHG_SHARE_NEVER (0x1 << LDOFF_CHG_SHARE_SHIFT)
+#define LDOFF_CHG_SHARE_OK_PROP (0x2 << LDOFF_CHG_SHARE_SHIFT)
+#define LDOFF_CHG_SHARE_OK_NO_PROP (0x3 << LDOFF_CHG_SHARE_SHIFT)
+
+#define LDOFF_ENABLE_AUTO_NFIFO BIT(2)
+#define LDOFF_DISABLE_AUTO_NFIFO BIT(3)
+
+#define LDOFF_CHG_NONSEQLIODN_SHIFT 4
+#define LDOFF_CHG_NONSEQLIODN_MASK (0x3 << LDOFF_CHG_NONSEQLIODN_SHIFT)
+#define LDOFF_CHG_NONSEQLIODN_SEQ (0x1 << LDOFF_CHG_NONSEQLIODN_SHIFT)
+#define LDOFF_CHG_NONSEQLIODN_NON_SEQ (0x2 << LDOFF_CHG_NONSEQLIODN_SHIFT)
+#define LDOFF_CHG_NONSEQLIODN_TRUSTED (0x3 << LDOFF_CHG_NONSEQLIODN_SHIFT)
+
+#define LDOFF_CHG_SEQLIODN_SHIFT 6
+#define LDOFF_CHG_SEQLIODN_MASK (0x3 << LDOFF_CHG_SEQLIODN_SHIFT)
+#define LDOFF_CHG_SEQLIODN_SEQ (0x1 << LDOFF_CHG_SEQLIODN_SHIFT)
+#define LDOFF_CHG_SEQLIODN_NON_SEQ (0x2 << LDOFF_CHG_SEQLIODN_SHIFT)
+#define LDOFF_CHG_SEQLIODN_TRUSTED (0x3 << LDOFF_CHG_SEQLIODN_SHIFT)
+
+/* Data length in bytes */
+#define LDST_LEN_SHIFT 0
+#define LDST_LEN_MASK (0xff << LDST_LEN_SHIFT)
+
+/* Special Length definitions when dst=deco-ctrl */
+#define LDLEN_ENABLE_OSL_COUNT BIT(7)
+#define LDLEN_RST_CHA_OFIFO_PTR BIT(6)
+#define LDLEN_RST_OFIFO BIT(5)
+#define LDLEN_SET_OFIFO_OFF_VALID BIT(4)
+#define LDLEN_SET_OFIFO_OFF_RSVD BIT(3)
+#define LDLEN_SET_OFIFO_OFFSET_SHIFT 0
+#define LDLEN_SET_OFIFO_OFFSET_MASK (3 << LDLEN_SET_OFIFO_OFFSET_SHIFT)
+
+/* CCB Clear Written Register bits */
+#define CLRW_CLR_C1MODE BIT(0)
+#define CLRW_CLR_C1DATAS BIT(2)
+#define CLRW_CLR_C1ICV BIT(3)
+#define CLRW_CLR_C1CTX BIT(5)
+#define CLRW_CLR_C1KEY BIT(6)
+#define CLRW_CLR_PK_A BIT(12)
+#define CLRW_CLR_PK_B BIT(13)
+#define CLRW_CLR_PK_N BIT(14)
+#define CLRW_CLR_PK_E BIT(15)
+#define CLRW_CLR_C2MODE BIT(16)
+#define CLRW_CLR_C2KEYS BIT(17)
+#define CLRW_CLR_C2DATAS BIT(18)
+#define CLRW_CLR_C2CTX BIT(21)
+#define CLRW_CLR_C2KEY BIT(22)
+#define CLRW_RESET_CLS2_DONE BIT(26) /* era 4 */
+#define CLRW_RESET_CLS1_DONE BIT(27) /* era 4 */
+#define CLRW_RESET_CLS2_CHA BIT(28) /* era 4 */
+#define CLRW_RESET_CLS1_CHA BIT(29) /* era 4 */
+#define CLRW_RESET_OFIFO BIT(30) /* era 3 */
+#define CLRW_RESET_IFIFO_DFIFO BIT(31) /* era 3 */
+
+/* CHA Control Register bits */
+#define CCTRL_RESET_CHA_ALL BIT(0)
+#define CCTRL_RESET_CHA_AESA BIT(1)
+#define CCTRL_RESET_CHA_DESA BIT(2)
+#define CCTRL_RESET_CHA_AFHA BIT(3)
+#define CCTRL_RESET_CHA_KFHA BIT(4)
+#define CCTRL_RESET_CHA_SF8A BIT(5)
+#define CCTRL_RESET_CHA_PKHA BIT(6)
+#define CCTRL_RESET_CHA_MDHA BIT(7)
+#define CCTRL_RESET_CHA_CRCA BIT(8)
+#define CCTRL_RESET_CHA_RNG BIT(9)
+#define CCTRL_RESET_CHA_SF9A BIT(10)
+#define CCTRL_RESET_CHA_ZUCE BIT(11)
+#define CCTRL_RESET_CHA_ZUCA BIT(12)
+#define CCTRL_UNLOAD_PK_A0 BIT(16)
+#define CCTRL_UNLOAD_PK_A1 BIT(17)
+#define CCTRL_UNLOAD_PK_A2 BIT(18)
+#define CCTRL_UNLOAD_PK_A3 BIT(19)
+#define CCTRL_UNLOAD_PK_B0 BIT(20)
+#define CCTRL_UNLOAD_PK_B1 BIT(21)
+#define CCTRL_UNLOAD_PK_B2 BIT(22)
+#define CCTRL_UNLOAD_PK_B3 BIT(23)
+#define CCTRL_UNLOAD_PK_N BIT(24)
+#define CCTRL_UNLOAD_PK_A BIT(26)
+#define CCTRL_UNLOAD_PK_B BIT(27)
+#define CCTRL_UNLOAD_SBOX BIT(28)
+
+/* IRQ Control Register (CxCIRQ) bits */
+#define CIRQ_ADI BIT(1)
+#define CIRQ_DDI BIT(2)
+#define CIRQ_RCDI BIT(3)
+#define CIRQ_KDI BIT(4)
+#define CIRQ_S8DI BIT(5)
+#define CIRQ_PDI BIT(6)
+#define CIRQ_MDI BIT(7)
+#define CIRQ_CDI BIT(8)
+#define CIRQ_RNDI BIT(9)
+#define CIRQ_S9DI BIT(10)
+#define CIRQ_ZEDI BIT(11) /* valid for Era 5 or higher */
+#define CIRQ_ZADI BIT(12) /* valid for Era 5 or higher */
+#define CIRQ_AEI BIT(17)
+#define CIRQ_DEI BIT(18)
+#define CIRQ_RCEI BIT(19)
+#define CIRQ_KEI BIT(20)
+#define CIRQ_S8EI BIT(21)
+#define CIRQ_PEI BIT(22)
+#define CIRQ_MEI BIT(23)
+#define CIRQ_CEI BIT(24)
+#define CIRQ_RNEI BIT(25)
+#define CIRQ_S9EI BIT(26)
+#define CIRQ_ZEEI BIT(27) /* valid for Era 5 or higher */
+#define CIRQ_ZAEI BIT(28) /* valid for Era 5 or higher */
+
+/*
+ * FIFO_LOAD/FIFO_STORE/SEQ_FIFO_LOAD/SEQ_FIFO_STORE
+ * Command Constructs
+ */
+
+/*
+ * Load Destination: 0 = skip (SEQ_FIFO_LOAD only),
+ * 1 = Load for Class1, 2 = Load for Class2, 3 = Load both
+ * Store Source: 0 = normal, 1 = Class1key, 2 = Class2key
+ */
+#define FIFOLD_CLASS_SHIFT 25
+#define FIFOLD_CLASS_MASK (0x03 << FIFOLD_CLASS_SHIFT)
+#define FIFOLD_CLASS_SKIP (0x00 << FIFOLD_CLASS_SHIFT)
+#define FIFOLD_CLASS_CLASS1 (0x01 << FIFOLD_CLASS_SHIFT)
+#define FIFOLD_CLASS_CLASS2 (0x02 << FIFOLD_CLASS_SHIFT)
+#define FIFOLD_CLASS_BOTH (0x03 << FIFOLD_CLASS_SHIFT)
+
+#define FIFOST_CLASS_SHIFT 25
+#define FIFOST_CLASS_MASK (0x03 << FIFOST_CLASS_SHIFT)
+#define FIFOST_CLASS_NORMAL (0x00 << FIFOST_CLASS_SHIFT)
+#define FIFOST_CLASS_CLASS1KEY (0x01 << FIFOST_CLASS_SHIFT)
+#define FIFOST_CLASS_CLASS2KEY (0x02 << FIFOST_CLASS_SHIFT)
+#define FIFOST_CLASS_BOTH (0x03 << FIFOST_CLASS_SHIFT)
+
+/*
+ * Scatter-Gather Table/Variable Length Field
+ * If set for FIFO_LOAD, refers to a SG table. Within
+ * SEQ_FIFO_LOAD, is variable input sequence
+ */
+#define FIFOLDST_SGF_SHIFT 24
+#define FIFOLDST_SGF_MASK (1 << FIFOLDST_SGF_SHIFT)
+#define FIFOLDST_VLF_MASK (1 << FIFOLDST_SGF_SHIFT)
+#define FIFOLDST_SGF BIT(24)
+#define FIFOLDST_VLF BIT(24)
+
+/*
+ * Immediate - Data follows command in descriptor
+ * AIDF - Already in Input Data FIFO
+ */
+#define FIFOLD_IMM_SHIFT 23
+#define FIFOLD_IMM_MASK (1 << FIFOLD_IMM_SHIFT)
+#define FIFOLD_AIDF_MASK (1 << FIFOLD_IMM_SHIFT)
+#define FIFOLD_IMM BIT(23)
+#define FIFOLD_AIDF BIT(23)
+
+#define FIFOST_IMM_SHIFT 23
+#define FIFOST_IMM_MASK (1 << FIFOST_IMM_SHIFT)
+#define FIFOST_IMM BIT(23)
+
+/* Continue - Not the last FIFO store to come */
+#define FIFOST_CONT_SHIFT 23
+#define FIFOST_CONT_MASK (1 << FIFOST_CONT_SHIFT)
+#define FIFOST_CONT BIT(23)
+
+/*
+ * Extended Length - use 32-bit extended length that
+ * follows the pointer field. Illegal with IMM set
+ */
+#define FIFOLDST_EXT_SHIFT 22
+#define FIFOLDST_EXT_MASK (1 << FIFOLDST_EXT_SHIFT)
+#define FIFOLDST_EXT BIT(22)
+
+/* Input data type.*/
+#define FIFOLD_TYPE_SHIFT 16
+#define FIFOLD_CONT_TYPE_SHIFT 19 /* shift past last-flush bits */
+#define FIFOLD_TYPE_MASK (0x3f << FIFOLD_TYPE_SHIFT)
+
+/* PK types */
+#define FIFOLD_TYPE_PK (0x00 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_MASK (0x30 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_TYPEMASK (0x0f << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_A0 (0x00 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_A1 (0x01 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_A2 (0x02 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_A3 (0x03 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_B0 (0x04 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_B1 (0x05 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_B2 (0x06 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_B3 (0x07 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_N (0x08 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_A (0x0c << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_PK_B (0x0d << FIFOLD_TYPE_SHIFT)
+
+/* Other types. Need to OR in last/flush bits as desired */
+#define FIFOLD_TYPE_MSG_MASK (0x38 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_MSG (0x10 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_MSG1OUT2 (0x18 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_IV (0x20 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_BITDATA (0x28 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_AAD (0x30 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_ICV (0x38 << FIFOLD_TYPE_SHIFT)
+
+/* Last/Flush bits for use with "other" types above */
+#define FIFOLD_TYPE_ACT_MASK (0x07 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_NOACTION (0x00 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_FLUSH1 (0x01 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_LAST1 (0x02 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_LAST2FLUSH (0x03 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_LAST2 (0x04 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_LAST2FLUSH1 (0x05 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_LASTBOTH (0x06 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_LASTBOTHFL (0x07 << FIFOLD_TYPE_SHIFT)
+#define FIFOLD_TYPE_NOINFOFIFO (0x0f << FIFOLD_TYPE_SHIFT)
+
+#define FIFOLDST_LEN_MASK 0xffff
+#define FIFOLDST_EXT_LEN_MASK 0xffffffff
+
+/* Output data types */
+#define FIFOST_TYPE_SHIFT 16
+#define FIFOST_TYPE_MASK (0x3f << FIFOST_TYPE_SHIFT)
+
+#define FIFOST_TYPE_PKHA_A0 (0x00 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_A1 (0x01 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_A2 (0x02 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_A3 (0x03 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_B0 (0x04 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_B1 (0x05 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_B2 (0x06 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_B3 (0x07 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_N (0x08 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_A (0x0c << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_B (0x0d << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_AF_SBOX_JKEK (0x20 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_AF_SBOX_TKEK (0x21 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_E_JKEK (0x22 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_PKHA_E_TKEK (0x23 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_KEY_KEK (0x24 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_KEY_TKEK (0x25 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_SPLIT_KEK (0x26 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_SPLIT_TKEK (0x27 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_OUTFIFO_KEK (0x28 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_OUTFIFO_TKEK (0x29 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_MESSAGE_DATA (0x30 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_MESSAGE_DATA2 (0x31 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_RNGSTORE (0x34 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_RNGFIFO (0x35 << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_METADATA (0x3e << FIFOST_TYPE_SHIFT)
+#define FIFOST_TYPE_SKIP (0x3f << FIFOST_TYPE_SHIFT)
+
+/*
+ * OPERATION Command Constructs
+ */
+
+/* Operation type selectors - OP TYPE */
+#define OP_TYPE_SHIFT 24
+#define OP_TYPE_MASK (0x07 << OP_TYPE_SHIFT)
+
+#define OP_TYPE_UNI_PROTOCOL (0x00 << OP_TYPE_SHIFT)
+#define OP_TYPE_PK (0x01 << OP_TYPE_SHIFT)
+#define OP_TYPE_CLASS1_ALG (0x02 << OP_TYPE_SHIFT)
+#define OP_TYPE_CLASS2_ALG (0x04 << OP_TYPE_SHIFT)
+#define OP_TYPE_DECAP_PROTOCOL (0x06 << OP_TYPE_SHIFT)
+#define OP_TYPE_ENCAP_PROTOCOL (0x07 << OP_TYPE_SHIFT)
+
+/* ProtocolID selectors - PROTID */
+#define OP_PCLID_SHIFT 16
+#define OP_PCLID_MASK (0xff << OP_PCLID_SHIFT)
+
+/* Assuming OP_TYPE = OP_TYPE_UNI_PROTOCOL */
+#define OP_PCLID_IKEV1_PRF (0x01 << OP_PCLID_SHIFT)
+#define OP_PCLID_IKEV2_PRF (0x02 << OP_PCLID_SHIFT)
+#define OP_PCLID_SSL30_PRF (0x08 << OP_PCLID_SHIFT)
+#define OP_PCLID_TLS10_PRF (0x09 << OP_PCLID_SHIFT)
+#define OP_PCLID_TLS11_PRF (0x0a << OP_PCLID_SHIFT)
+#define OP_PCLID_TLS12_PRF (0x0b << OP_PCLID_SHIFT)
+#define OP_PCLID_DTLS10_PRF (0x0c << OP_PCLID_SHIFT)
+#define OP_PCLID_PUBLICKEYPAIR (0x14 << OP_PCLID_SHIFT)
+#define OP_PCLID_DSASIGN (0x15 << OP_PCLID_SHIFT)
+#define OP_PCLID_DSAVERIFY (0x16 << OP_PCLID_SHIFT)
+#define OP_PCLID_DIFFIEHELLMAN (0x17 << OP_PCLID_SHIFT)
+#define OP_PCLID_RSAENCRYPT (0x18 << OP_PCLID_SHIFT)
+#define OP_PCLID_RSADECRYPT (0x19 << OP_PCLID_SHIFT)
+#define OP_PCLID_DKP_MD5 (0x20 << OP_PCLID_SHIFT)
+#define OP_PCLID_DKP_SHA1 (0x21 << OP_PCLID_SHIFT)
+#define OP_PCLID_DKP_SHA224 (0x22 << OP_PCLID_SHIFT)
+#define OP_PCLID_DKP_SHA256 (0x23 << OP_PCLID_SHIFT)
+#define OP_PCLID_DKP_SHA384 (0x24 << OP_PCLID_SHIFT)
+#define OP_PCLID_DKP_SHA512 (0x25 << OP_PCLID_SHIFT)
+
+/* Assuming OP_TYPE = OP_TYPE_DECAP_PROTOCOL/ENCAP_PROTOCOL */
+#define OP_PCLID_IPSEC (0x01 << OP_PCLID_SHIFT)
+#define OP_PCLID_SRTP (0x02 << OP_PCLID_SHIFT)
+#define OP_PCLID_MACSEC (0x03 << OP_PCLID_SHIFT)
+#define OP_PCLID_WIFI (0x04 << OP_PCLID_SHIFT)
+#define OP_PCLID_WIMAX (0x05 << OP_PCLID_SHIFT)
+#define OP_PCLID_SSL30 (0x08 << OP_PCLID_SHIFT)
+#define OP_PCLID_TLS10 (0x09 << OP_PCLID_SHIFT)
+#define OP_PCLID_TLS11 (0x0a << OP_PCLID_SHIFT)
+#define OP_PCLID_TLS12 (0x0b << OP_PCLID_SHIFT)
+#define OP_PCLID_DTLS10 (0x0c << OP_PCLID_SHIFT)
+#define OP_PCLID_BLOB (0x0d << OP_PCLID_SHIFT)
+#define OP_PCLID_IPSEC_NEW (0x11 << OP_PCLID_SHIFT)
+#define OP_PCLID_3G_DCRC (0x31 << OP_PCLID_SHIFT)
+#define OP_PCLID_3G_RLC_PDU (0x32 << OP_PCLID_SHIFT)
+#define OP_PCLID_3G_RLC_SDU (0x33 << OP_PCLID_SHIFT)
+#define OP_PCLID_LTE_PDCP_USER (0x42 << OP_PCLID_SHIFT)
+#define OP_PCLID_LTE_PDCP_CTRL (0x43 << OP_PCLID_SHIFT)
+#define OP_PCLID_LTE_PDCP_CTRL_MIXED (0x44 << OP_PCLID_SHIFT)
+
+/*
+ * ProtocolInfo selectors
+ */
+#define OP_PCLINFO_MASK 0xffff
+
+/* for OP_PCLID_IPSEC */
+#define OP_PCL_IPSEC_CIPHER_MASK 0xff00
+#define OP_PCL_IPSEC_AUTH_MASK 0x00ff
+
+#define OP_PCL_IPSEC_DES_IV64 0x0100
+#define OP_PCL_IPSEC_DES 0x0200
+#define OP_PCL_IPSEC_3DES 0x0300
+#define OP_PCL_IPSEC_NULL 0x0B00
+#define OP_PCL_IPSEC_AES_CBC 0x0c00
+#define OP_PCL_IPSEC_AES_CTR 0x0d00
+#define OP_PCL_IPSEC_AES_XTS 0x1600
+#define OP_PCL_IPSEC_AES_CCM8 0x0e00
+#define OP_PCL_IPSEC_AES_CCM12 0x0f00
+#define OP_PCL_IPSEC_AES_CCM16 0x1000
+#define OP_PCL_IPSEC_AES_GCM8 0x1200
+#define OP_PCL_IPSEC_AES_GCM12 0x1300
+#define OP_PCL_IPSEC_AES_GCM16 0x1400
+#define OP_PCL_IPSEC_AES_NULL_WITH_GMAC 0x1500
+
+#define OP_PCL_IPSEC_HMAC_NULL 0x0000
+#define OP_PCL_IPSEC_HMAC_MD5_96 0x0001
+#define OP_PCL_IPSEC_HMAC_SHA1_96 0x0002
+#define OP_PCL_IPSEC_AES_XCBC_MAC_96 0x0005
+#define OP_PCL_IPSEC_HMAC_MD5_128 0x0006
+#define OP_PCL_IPSEC_HMAC_SHA1_160 0x0007
+#define OP_PCL_IPSEC_AES_CMAC_96 0x0008
+#define OP_PCL_IPSEC_HMAC_SHA2_256_128 0x000c
+#define OP_PCL_IPSEC_HMAC_SHA2_384_192 0x000d
+#define OP_PCL_IPSEC_HMAC_SHA2_512_256 0x000e
+
+/* For SRTP - OP_PCLID_SRTP */
+#define OP_PCL_SRTP_CIPHER_MASK 0xff00
+#define OP_PCL_SRTP_AUTH_MASK 0x00ff
+
+#define OP_PCL_SRTP_AES_CTR 0x0d00
+
+#define OP_PCL_SRTP_HMAC_SHA1_160 0x0007
+
+/* For SSL 3.0 - OP_PCLID_SSL30 */
+#define OP_PCL_SSL30_AES_128_CBC_SHA 0x002f
+#define OP_PCL_SSL30_AES_128_CBC_SHA_2 0x0030
+#define OP_PCL_SSL30_AES_128_CBC_SHA_3 0x0031
+#define OP_PCL_SSL30_AES_128_CBC_SHA_4 0x0032
+#define OP_PCL_SSL30_AES_128_CBC_SHA_5 0x0033
+#define OP_PCL_SSL30_AES_128_CBC_SHA_6 0x0034
+#define OP_PCL_SSL30_AES_128_CBC_SHA_7 0x008c
+#define OP_PCL_SSL30_AES_128_CBC_SHA_8 0x0090
+#define OP_PCL_SSL30_AES_128_CBC_SHA_9 0x0094
+#define OP_PCL_SSL30_AES_128_CBC_SHA_10 0xc004
+#define OP_PCL_SSL30_AES_128_CBC_SHA_11 0xc009
+#define OP_PCL_SSL30_AES_128_CBC_SHA_12 0xc00e
+#define OP_PCL_SSL30_AES_128_CBC_SHA_13 0xc013
+#define OP_PCL_SSL30_AES_128_CBC_SHA_14 0xc018
+#define OP_PCL_SSL30_AES_128_CBC_SHA_15 0xc01d
+#define OP_PCL_SSL30_AES_128_CBC_SHA_16 0xc01e
+#define OP_PCL_SSL30_AES_128_CBC_SHA_17 0xc01f
+
+#define OP_PCL_SSL30_AES_256_CBC_SHA 0x0035
+#define OP_PCL_SSL30_AES_256_CBC_SHA_2 0x0036
+#define OP_PCL_SSL30_AES_256_CBC_SHA_3 0x0037
+#define OP_PCL_SSL30_AES_256_CBC_SHA_4 0x0038
+#define OP_PCL_SSL30_AES_256_CBC_SHA_5 0x0039
+#define OP_PCL_SSL30_AES_256_CBC_SHA_6 0x003a
+#define OP_PCL_SSL30_AES_256_CBC_SHA_7 0x008d
+#define OP_PCL_SSL30_AES_256_CBC_SHA_8 0x0091
+#define OP_PCL_SSL30_AES_256_CBC_SHA_9 0x0095
+#define OP_PCL_SSL30_AES_256_CBC_SHA_10 0xc005
+#define OP_PCL_SSL30_AES_256_CBC_SHA_11 0xc00a
+#define OP_PCL_SSL30_AES_256_CBC_SHA_12 0xc00f
+#define OP_PCL_SSL30_AES_256_CBC_SHA_13 0xc014
+#define OP_PCL_SSL30_AES_256_CBC_SHA_14 0xc019
+#define OP_PCL_SSL30_AES_256_CBC_SHA_15 0xc020
+#define OP_PCL_SSL30_AES_256_CBC_SHA_16 0xc021
+#define OP_PCL_SSL30_AES_256_CBC_SHA_17 0xc022
+
+#define OP_PCL_SSL30_AES_128_GCM_SHA256_1 0x009C
+#define OP_PCL_SSL30_AES_256_GCM_SHA384_1 0x009D
+#define OP_PCL_SSL30_AES_128_GCM_SHA256_2 0x009E
+#define OP_PCL_SSL30_AES_256_GCM_SHA384_2 0x009F
+#define OP_PCL_SSL30_AES_128_GCM_SHA256_3 0x00A0
+#define OP_PCL_SSL30_AES_256_GCM_SHA384_3 0x00A1
+#define OP_PCL_SSL30_AES_128_GCM_SHA256_4 0x00A2
+#define OP_PCL_SSL30_AES_256_GCM_SHA384_4 0x00A3
+#define OP_PCL_SSL30_AES_128_GCM_SHA256_5 0x00A4
+#define OP_PCL_SSL30_AES_256_GCM_SHA384_5 0x00A5
+#define OP_PCL_SSL30_AES_128_GCM_SHA256_6 0x00A6
+
+#define OP_PCL_TLS_DH_ANON_AES_256_GCM_SHA384 0x00A7
+#define OP_PCL_TLS_PSK_AES_128_GCM_SHA256 0x00A8
+#define OP_PCL_TLS_PSK_AES_256_GCM_SHA384 0x00A9
+#define OP_PCL_TLS_DHE_PSK_AES_128_GCM_SHA256 0x00AA
+#define OP_PCL_TLS_DHE_PSK_AES_256_GCM_SHA384 0x00AB
+#define OP_PCL_TLS_RSA_PSK_AES_128_GCM_SHA256 0x00AC
+#define OP_PCL_TLS_RSA_PSK_AES_256_GCM_SHA384 0x00AD
+#define OP_PCL_TLS_PSK_AES_128_CBC_SHA256 0x00AE
+#define OP_PCL_TLS_PSK_AES_256_CBC_SHA384 0x00AF
+#define OP_PCL_TLS_DHE_PSK_AES_128_CBC_SHA256 0x00B2
+#define OP_PCL_TLS_DHE_PSK_AES_256_CBC_SHA384 0x00B3
+#define OP_PCL_TLS_RSA_PSK_AES_128_CBC_SHA256 0x00B6
+#define OP_PCL_TLS_RSA_PSK_AES_256_CBC_SHA384 0x00B7
+
+#define OP_PCL_SSL30_3DES_EDE_CBC_MD5 0x0023
+
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA 0x001f
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_2 0x008b
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_3 0x008f
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_4 0x0093
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_5 0x000a
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_6 0x000d
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_7 0x0010
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_8 0x0013
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_9 0x0016
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_10 0x001b
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_11 0xc003
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_12 0xc008
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_13 0xc00d
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_14 0xc012
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_15 0xc017
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_16 0xc01a
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_17 0xc01b
+#define OP_PCL_SSL30_3DES_EDE_CBC_SHA_18 0xc01c
+
+#define OP_PCL_SSL30_DES40_CBC_MD5 0x0029
+
+#define OP_PCL_SSL30_DES_CBC_MD5 0x0022
+
+#define OP_PCL_SSL30_DES40_CBC_SHA 0x0008
+#define OP_PCL_SSL30_DES40_CBC_SHA_2 0x000b
+#define OP_PCL_SSL30_DES40_CBC_SHA_3 0x000e
+#define OP_PCL_SSL30_DES40_CBC_SHA_4 0x0011
+#define OP_PCL_SSL30_DES40_CBC_SHA_5 0x0014
+#define OP_PCL_SSL30_DES40_CBC_SHA_6 0x0019
+#define OP_PCL_SSL30_DES40_CBC_SHA_7 0x0026
+
+#define OP_PCL_SSL30_DES_CBC_SHA 0x001e
+#define OP_PCL_SSL30_DES_CBC_SHA_2 0x0009
+#define OP_PCL_SSL30_DES_CBC_SHA_3 0x000c
+#define OP_PCL_SSL30_DES_CBC_SHA_4 0x000f
+#define OP_PCL_SSL30_DES_CBC_SHA_5 0x0012
+#define OP_PCL_SSL30_DES_CBC_SHA_6 0x0015
+#define OP_PCL_SSL30_DES_CBC_SHA_7 0x001a
+
+#define OP_PCL_SSL30_RC4_128_MD5 0x0024
+#define OP_PCL_SSL30_RC4_128_MD5_2 0x0004
+#define OP_PCL_SSL30_RC4_128_MD5_3 0x0018
+
+#define OP_PCL_SSL30_RC4_40_MD5 0x002b
+#define OP_PCL_SSL30_RC4_40_MD5_2 0x0003
+#define OP_PCL_SSL30_RC4_40_MD5_3 0x0017
+
+#define OP_PCL_SSL30_RC4_128_SHA 0x0020
+#define OP_PCL_SSL30_RC4_128_SHA_2 0x008a
+#define OP_PCL_SSL30_RC4_128_SHA_3 0x008e
+#define OP_PCL_SSL30_RC4_128_SHA_4 0x0092
+#define OP_PCL_SSL30_RC4_128_SHA_5 0x0005
+#define OP_PCL_SSL30_RC4_128_SHA_6 0xc002
+#define OP_PCL_SSL30_RC4_128_SHA_7 0xc007
+#define OP_PCL_SSL30_RC4_128_SHA_8 0xc00c
+#define OP_PCL_SSL30_RC4_128_SHA_9 0xc011
+#define OP_PCL_SSL30_RC4_128_SHA_10 0xc016
+
+#define OP_PCL_SSL30_RC4_40_SHA 0x0028
+
+/* For TLS 1.0 - OP_PCLID_TLS10 */
+#define OP_PCL_TLS10_AES_128_CBC_SHA 0x002f
+#define OP_PCL_TLS10_AES_128_CBC_SHA_2 0x0030
+#define OP_PCL_TLS10_AES_128_CBC_SHA_3 0x0031
+#define OP_PCL_TLS10_AES_128_CBC_SHA_4 0x0032
+#define OP_PCL_TLS10_AES_128_CBC_SHA_5 0x0033
+#define OP_PCL_TLS10_AES_128_CBC_SHA_6 0x0034
+#define OP_PCL_TLS10_AES_128_CBC_SHA_7 0x008c
+#define OP_PCL_TLS10_AES_128_CBC_SHA_8 0x0090
+#define OP_PCL_TLS10_AES_128_CBC_SHA_9 0x0094
+#define OP_PCL_TLS10_AES_128_CBC_SHA_10 0xc004
+#define OP_PCL_TLS10_AES_128_CBC_SHA_11 0xc009
+#define OP_PCL_TLS10_AES_128_CBC_SHA_12 0xc00e
+#define OP_PCL_TLS10_AES_128_CBC_SHA_13 0xc013
+#define OP_PCL_TLS10_AES_128_CBC_SHA_14 0xc018
+#define OP_PCL_TLS10_AES_128_CBC_SHA_15 0xc01d
+#define OP_PCL_TLS10_AES_128_CBC_SHA_16 0xc01e
+#define OP_PCL_TLS10_AES_128_CBC_SHA_17 0xc01f
+
+#define OP_PCL_TLS10_AES_256_CBC_SHA 0x0035
+#define OP_PCL_TLS10_AES_256_CBC_SHA_2 0x0036
+#define OP_PCL_TLS10_AES_256_CBC_SHA_3 0x0037
+#define OP_PCL_TLS10_AES_256_CBC_SHA_4 0x0038
+#define OP_PCL_TLS10_AES_256_CBC_SHA_5 0x0039
+#define OP_PCL_TLS10_AES_256_CBC_SHA_6 0x003a
+#define OP_PCL_TLS10_AES_256_CBC_SHA_7 0x008d
+#define OP_PCL_TLS10_AES_256_CBC_SHA_8 0x0091
+#define OP_PCL_TLS10_AES_256_CBC_SHA_9 0x0095
+#define OP_PCL_TLS10_AES_256_CBC_SHA_10 0xc005
+#define OP_PCL_TLS10_AES_256_CBC_SHA_11 0xc00a
+#define OP_PCL_TLS10_AES_256_CBC_SHA_12 0xc00f
+#define OP_PCL_TLS10_AES_256_CBC_SHA_13 0xc014
+#define OP_PCL_TLS10_AES_256_CBC_SHA_14 0xc019
+#define OP_PCL_TLS10_AES_256_CBC_SHA_15 0xc020
+#define OP_PCL_TLS10_AES_256_CBC_SHA_16 0xc021
+#define OP_PCL_TLS10_AES_256_CBC_SHA_17 0xc022
+
+#define OP_PCL_TLS_ECDHE_ECDSA_AES_128_CBC_SHA256 0xC023
+#define OP_PCL_TLS_ECDHE_ECDSA_AES_256_CBC_SHA384 0xC024
+#define OP_PCL_TLS_ECDH_ECDSA_AES_128_CBC_SHA256 0xC025
+#define OP_PCL_TLS_ECDH_ECDSA_AES_256_CBC_SHA384 0xC026
+#define OP_PCL_TLS_ECDHE_RSA_AES_128_CBC_SHA256 0xC027
+#define OP_PCL_TLS_ECDHE_RSA_AES_256_CBC_SHA384 0xC028
+#define OP_PCL_TLS_ECDH_RSA_AES_128_CBC_SHA256 0xC029
+#define OP_PCL_TLS_ECDH_RSA_AES_256_CBC_SHA384 0xC02A
+#define OP_PCL_TLS_ECDHE_ECDSA_AES_128_GCM_SHA256 0xC02B
+#define OP_PCL_TLS_ECDHE_ECDSA_AES_256_GCM_SHA384 0xC02C
+#define OP_PCL_TLS_ECDH_ECDSA_AES_128_GCM_SHA256 0xC02D
+#define OP_PCL_TLS_ECDH_ECDSA_AES_256_GCM_SHA384 0xC02E
+#define OP_PCL_TLS_ECDHE_RSA_AES_128_GCM_SHA256 0xC02F
+#define OP_PCL_TLS_ECDHE_RSA_AES_256_GCM_SHA384 0xC030
+#define OP_PCL_TLS_ECDH_RSA_AES_128_GCM_SHA256 0xC031
+#define OP_PCL_TLS_ECDH_RSA_AES_256_GCM_SHA384 0xC032
+#define OP_PCL_TLS_ECDHE_PSK_RC4_128_SHA 0xC033
+#define OP_PCL_TLS_ECDHE_PSK_3DES_EDE_CBC_SHA 0xC034
+#define OP_PCL_TLS_ECDHE_PSK_AES_128_CBC_SHA 0xC035
+#define OP_PCL_TLS_ECDHE_PSK_AES_256_CBC_SHA 0xC036
+#define OP_PCL_TLS_ECDHE_PSK_AES_128_CBC_SHA256 0xC037
+#define OP_PCL_TLS_ECDHE_PSK_AES_256_CBC_SHA384 0xC038
+
+/* #define OP_PCL_TLS10_3DES_EDE_CBC_MD5 0x0023 */
+
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA 0x001f
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_2 0x008b
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_3 0x008f
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_4 0x0093
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_5 0x000a
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_6 0x000d
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_7 0x0010
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_8 0x0013
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_9 0x0016
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_10 0x001b
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_11 0xc003
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_12 0xc008
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_13 0xc00d
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_14 0xc012
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_15 0xc017
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_16 0xc01a
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_17 0xc01b
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA_18 0xc01c
+
+#define OP_PCL_TLS10_DES40_CBC_MD5 0x0029
+
+#define OP_PCL_TLS10_DES_CBC_MD5 0x0022
+
+#define OP_PCL_TLS10_DES40_CBC_SHA 0x0008
+#define OP_PCL_TLS10_DES40_CBC_SHA_2 0x000b
+#define OP_PCL_TLS10_DES40_CBC_SHA_3 0x000e
+#define OP_PCL_TLS10_DES40_CBC_SHA_4 0x0011
+#define OP_PCL_TLS10_DES40_CBC_SHA_5 0x0014
+#define OP_PCL_TLS10_DES40_CBC_SHA_6 0x0019
+#define OP_PCL_TLS10_DES40_CBC_SHA_7 0x0026
+
+#define OP_PCL_TLS10_DES_CBC_SHA 0x001e
+#define OP_PCL_TLS10_DES_CBC_SHA_2 0x0009
+#define OP_PCL_TLS10_DES_CBC_SHA_3 0x000c
+#define OP_PCL_TLS10_DES_CBC_SHA_4 0x000f
+#define OP_PCL_TLS10_DES_CBC_SHA_5 0x0012
+#define OP_PCL_TLS10_DES_CBC_SHA_6 0x0015
+#define OP_PCL_TLS10_DES_CBC_SHA_7 0x001a
+
+#define OP_PCL_TLS10_RC4_128_MD5 0x0024
+#define OP_PCL_TLS10_RC4_128_MD5_2 0x0004
+#define OP_PCL_TLS10_RC4_128_MD5_3 0x0018
+
+#define OP_PCL_TLS10_RC4_40_MD5 0x002b
+#define OP_PCL_TLS10_RC4_40_MD5_2 0x0003
+#define OP_PCL_TLS10_RC4_40_MD5_3 0x0017
+
+#define OP_PCL_TLS10_RC4_128_SHA 0x0020
+#define OP_PCL_TLS10_RC4_128_SHA_2 0x008a
+#define OP_PCL_TLS10_RC4_128_SHA_3 0x008e
+#define OP_PCL_TLS10_RC4_128_SHA_4 0x0092
+#define OP_PCL_TLS10_RC4_128_SHA_5 0x0005
+#define OP_PCL_TLS10_RC4_128_SHA_6 0xc002
+#define OP_PCL_TLS10_RC4_128_SHA_7 0xc007
+#define OP_PCL_TLS10_RC4_128_SHA_8 0xc00c
+#define OP_PCL_TLS10_RC4_128_SHA_9 0xc011
+#define OP_PCL_TLS10_RC4_128_SHA_10 0xc016
+
+#define OP_PCL_TLS10_RC4_40_SHA 0x0028
+
+#define OP_PCL_TLS10_3DES_EDE_CBC_MD5 0xff23
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA160 0xff30
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA224 0xff34
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA256 0xff36
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA384 0xff33
+#define OP_PCL_TLS10_3DES_EDE_CBC_SHA512 0xff35
+#define OP_PCL_TLS10_AES_128_CBC_SHA160 0xff80
+#define OP_PCL_TLS10_AES_128_CBC_SHA224 0xff84
+#define OP_PCL_TLS10_AES_128_CBC_SHA256 0xff86
+#define OP_PCL_TLS10_AES_128_CBC_SHA384 0xff83
+#define OP_PCL_TLS10_AES_128_CBC_SHA512 0xff85
+#define OP_PCL_TLS10_AES_192_CBC_SHA160 0xff20
+#define OP_PCL_TLS10_AES_192_CBC_SHA224 0xff24
+#define OP_PCL_TLS10_AES_192_CBC_SHA256 0xff26
+#define OP_PCL_TLS10_AES_192_CBC_SHA384 0xff23
+#define OP_PCL_TLS10_AES_192_CBC_SHA512 0xff25
+#define OP_PCL_TLS10_AES_256_CBC_SHA160 0xff60
+#define OP_PCL_TLS10_AES_256_CBC_SHA224 0xff64
+#define OP_PCL_TLS10_AES_256_CBC_SHA256 0xff66
+#define OP_PCL_TLS10_AES_256_CBC_SHA384 0xff63
+#define OP_PCL_TLS10_AES_256_CBC_SHA512 0xff65
+
+#define OP_PCL_TLS_PVT_AES_192_CBC_SHA160 0xff90
+#define OP_PCL_TLS_PVT_AES_192_CBC_SHA384 0xff93
+#define OP_PCL_TLS_PVT_AES_192_CBC_SHA224 0xff94
+#define OP_PCL_TLS_PVT_AES_192_CBC_SHA512 0xff95
+#define OP_PCL_TLS_PVT_AES_192_CBC_SHA256 0xff96
+#define OP_PCL_TLS_PVT_MASTER_SECRET_PRF_FE 0xfffe
+#define OP_PCL_TLS_PVT_MASTER_SECRET_PRF_FF 0xffff
+
+/* For TLS 1.1 - OP_PCLID_TLS11 */
+#define OP_PCL_TLS11_AES_128_CBC_SHA 0x002f
+#define OP_PCL_TLS11_AES_128_CBC_SHA_2 0x0030
+#define OP_PCL_TLS11_AES_128_CBC_SHA_3 0x0031
+#define OP_PCL_TLS11_AES_128_CBC_SHA_4 0x0032
+#define OP_PCL_TLS11_AES_128_CBC_SHA_5 0x0033
+#define OP_PCL_TLS11_AES_128_CBC_SHA_6 0x0034
+#define OP_PCL_TLS11_AES_128_CBC_SHA_7 0x008c
+#define OP_PCL_TLS11_AES_128_CBC_SHA_8 0x0090
+#define OP_PCL_TLS11_AES_128_CBC_SHA_9 0x0094
+#define OP_PCL_TLS11_AES_128_CBC_SHA_10 0xc004
+#define OP_PCL_TLS11_AES_128_CBC_SHA_11 0xc009
+#define OP_PCL_TLS11_AES_128_CBC_SHA_12 0xc00e
+#define OP_PCL_TLS11_AES_128_CBC_SHA_13 0xc013
+#define OP_PCL_TLS11_AES_128_CBC_SHA_14 0xc018
+#define OP_PCL_TLS11_AES_128_CBC_SHA_15 0xc01d
+#define OP_PCL_TLS11_AES_128_CBC_SHA_16 0xc01e
+#define OP_PCL_TLS11_AES_128_CBC_SHA_17 0xc01f
+
+#define OP_PCL_TLS11_AES_256_CBC_SHA 0x0035
+#define OP_PCL_TLS11_AES_256_CBC_SHA_2 0x0036
+#define OP_PCL_TLS11_AES_256_CBC_SHA_3 0x0037
+#define OP_PCL_TLS11_AES_256_CBC_SHA_4 0x0038
+#define OP_PCL_TLS11_AES_256_CBC_SHA_5 0x0039
+#define OP_PCL_TLS11_AES_256_CBC_SHA_6 0x003a
+#define OP_PCL_TLS11_AES_256_CBC_SHA_7 0x008d
+#define OP_PCL_TLS11_AES_256_CBC_SHA_8 0x0091
+#define OP_PCL_TLS11_AES_256_CBC_SHA_9 0x0095
+#define OP_PCL_TLS11_AES_256_CBC_SHA_10 0xc005
+#define OP_PCL_TLS11_AES_256_CBC_SHA_11 0xc00a
+#define OP_PCL_TLS11_AES_256_CBC_SHA_12 0xc00f
+#define OP_PCL_TLS11_AES_256_CBC_SHA_13 0xc014
+#define OP_PCL_TLS11_AES_256_CBC_SHA_14 0xc019
+#define OP_PCL_TLS11_AES_256_CBC_SHA_15 0xc020
+#define OP_PCL_TLS11_AES_256_CBC_SHA_16 0xc021
+#define OP_PCL_TLS11_AES_256_CBC_SHA_17 0xc022
+
+/* #define OP_PCL_TLS11_3DES_EDE_CBC_MD5 0x0023 */
+
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA 0x001f
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_2 0x008b
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_3 0x008f
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_4 0x0093
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_5 0x000a
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_6 0x000d
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_7 0x0010
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_8 0x0013
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_9 0x0016
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_10 0x001b
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_11 0xc003
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_12 0xc008
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_13 0xc00d
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_14 0xc012
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_15 0xc017
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_16 0xc01a
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_17 0xc01b
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA_18 0xc01c
+
+#define OP_PCL_TLS11_DES40_CBC_MD5 0x0029
+
+#define OP_PCL_TLS11_DES_CBC_MD5 0x0022
+
+#define OP_PCL_TLS11_DES40_CBC_SHA 0x0008
+#define OP_PCL_TLS11_DES40_CBC_SHA_2 0x000b
+#define OP_PCL_TLS11_DES40_CBC_SHA_3 0x000e
+#define OP_PCL_TLS11_DES40_CBC_SHA_4 0x0011
+#define OP_PCL_TLS11_DES40_CBC_SHA_5 0x0014
+#define OP_PCL_TLS11_DES40_CBC_SHA_6 0x0019
+#define OP_PCL_TLS11_DES40_CBC_SHA_7 0x0026
+
+#define OP_PCL_TLS11_DES_CBC_SHA 0x001e
+#define OP_PCL_TLS11_DES_CBC_SHA_2 0x0009
+#define OP_PCL_TLS11_DES_CBC_SHA_3 0x000c
+#define OP_PCL_TLS11_DES_CBC_SHA_4 0x000f
+#define OP_PCL_TLS11_DES_CBC_SHA_5 0x0012
+#define OP_PCL_TLS11_DES_CBC_SHA_6 0x0015
+#define OP_PCL_TLS11_DES_CBC_SHA_7 0x001a
+
+#define OP_PCL_TLS11_RC4_128_MD5 0x0024
+#define OP_PCL_TLS11_RC4_128_MD5_2 0x0004
+#define OP_PCL_TLS11_RC4_128_MD5_3 0x0018
+
+#define OP_PCL_TLS11_RC4_40_MD5 0x002b
+#define OP_PCL_TLS11_RC4_40_MD5_2 0x0003
+#define OP_PCL_TLS11_RC4_40_MD5_3 0x0017
+
+#define OP_PCL_TLS11_RC4_128_SHA 0x0020
+#define OP_PCL_TLS11_RC4_128_SHA_2 0x008a
+#define OP_PCL_TLS11_RC4_128_SHA_3 0x008e
+#define OP_PCL_TLS11_RC4_128_SHA_4 0x0092
+#define OP_PCL_TLS11_RC4_128_SHA_5 0x0005
+#define OP_PCL_TLS11_RC4_128_SHA_6 0xc002
+#define OP_PCL_TLS11_RC4_128_SHA_7 0xc007
+#define OP_PCL_TLS11_RC4_128_SHA_8 0xc00c
+#define OP_PCL_TLS11_RC4_128_SHA_9 0xc011
+#define OP_PCL_TLS11_RC4_128_SHA_10 0xc016
+
+#define OP_PCL_TLS11_RC4_40_SHA 0x0028
+
+#define OP_PCL_TLS11_3DES_EDE_CBC_MD5 0xff23
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA160 0xff30
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA224 0xff34
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA256 0xff36
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA384 0xff33
+#define OP_PCL_TLS11_3DES_EDE_CBC_SHA512 0xff35
+#define OP_PCL_TLS11_AES_128_CBC_SHA160 0xff80
+#define OP_PCL_TLS11_AES_128_CBC_SHA224 0xff84
+#define OP_PCL_TLS11_AES_128_CBC_SHA256 0xff86
+#define OP_PCL_TLS11_AES_128_CBC_SHA384 0xff83
+#define OP_PCL_TLS11_AES_128_CBC_SHA512 0xff85
+#define OP_PCL_TLS11_AES_192_CBC_SHA160 0xff20
+#define OP_PCL_TLS11_AES_192_CBC_SHA224 0xff24
+#define OP_PCL_TLS11_AES_192_CBC_SHA256 0xff26
+#define OP_PCL_TLS11_AES_192_CBC_SHA384 0xff23
+#define OP_PCL_TLS11_AES_192_CBC_SHA512 0xff25
+#define OP_PCL_TLS11_AES_256_CBC_SHA160 0xff60
+#define OP_PCL_TLS11_AES_256_CBC_SHA224 0xff64
+#define OP_PCL_TLS11_AES_256_CBC_SHA256 0xff66
+#define OP_PCL_TLS11_AES_256_CBC_SHA384 0xff63
+#define OP_PCL_TLS11_AES_256_CBC_SHA512 0xff65
+
+
+/* For TLS 1.2 - OP_PCLID_TLS12 */
+#define OP_PCL_TLS12_AES_128_CBC_SHA 0x002f
+#define OP_PCL_TLS12_AES_128_CBC_SHA_2 0x0030
+#define OP_PCL_TLS12_AES_128_CBC_SHA_3 0x0031
+#define OP_PCL_TLS12_AES_128_CBC_SHA_4 0x0032
+#define OP_PCL_TLS12_AES_128_CBC_SHA_5 0x0033
+#define OP_PCL_TLS12_AES_128_CBC_SHA_6 0x0034
+#define OP_PCL_TLS12_AES_128_CBC_SHA_7 0x008c
+#define OP_PCL_TLS12_AES_128_CBC_SHA_8 0x0090
+#define OP_PCL_TLS12_AES_128_CBC_SHA_9 0x0094
+#define OP_PCL_TLS12_AES_128_CBC_SHA_10 0xc004
+#define OP_PCL_TLS12_AES_128_CBC_SHA_11 0xc009
+#define OP_PCL_TLS12_AES_128_CBC_SHA_12 0xc00e
+#define OP_PCL_TLS12_AES_128_CBC_SHA_13 0xc013
+#define OP_PCL_TLS12_AES_128_CBC_SHA_14 0xc018
+#define OP_PCL_TLS12_AES_128_CBC_SHA_15 0xc01d
+#define OP_PCL_TLS12_AES_128_CBC_SHA_16 0xc01e
+#define OP_PCL_TLS12_AES_128_CBC_SHA_17 0xc01f
+
+#define OP_PCL_TLS12_AES_256_CBC_SHA 0x0035
+#define OP_PCL_TLS12_AES_256_CBC_SHA_2 0x0036
+#define OP_PCL_TLS12_AES_256_CBC_SHA_3 0x0037
+#define OP_PCL_TLS12_AES_256_CBC_SHA_4 0x0038
+#define OP_PCL_TLS12_AES_256_CBC_SHA_5 0x0039
+#define OP_PCL_TLS12_AES_256_CBC_SHA_6 0x003a
+#define OP_PCL_TLS12_AES_256_CBC_SHA_7 0x008d
+#define OP_PCL_TLS12_AES_256_CBC_SHA_8 0x0091
+#define OP_PCL_TLS12_AES_256_CBC_SHA_9 0x0095
+#define OP_PCL_TLS12_AES_256_CBC_SHA_10 0xc005
+#define OP_PCL_TLS12_AES_256_CBC_SHA_11 0xc00a
+#define OP_PCL_TLS12_AES_256_CBC_SHA_12 0xc00f
+#define OP_PCL_TLS12_AES_256_CBC_SHA_13 0xc014
+#define OP_PCL_TLS12_AES_256_CBC_SHA_14 0xc019
+#define OP_PCL_TLS12_AES_256_CBC_SHA_15 0xc020
+#define OP_PCL_TLS12_AES_256_CBC_SHA_16 0xc021
+#define OP_PCL_TLS12_AES_256_CBC_SHA_17 0xc022
+
+/* #define OP_PCL_TLS12_3DES_EDE_CBC_MD5 0x0023 */
+
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA 0x001f
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_2 0x008b
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_3 0x008f
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_4 0x0093
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_5 0x000a
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_6 0x000d
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_7 0x0010
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_8 0x0013
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_9 0x0016
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_10 0x001b
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_11 0xc003
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_12 0xc008
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_13 0xc00d
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_14 0xc012
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_15 0xc017
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_16 0xc01a
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_17 0xc01b
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA_18 0xc01c
+
+#define OP_PCL_TLS12_DES40_CBC_MD5 0x0029
+
+#define OP_PCL_TLS12_DES_CBC_MD5 0x0022
+
+#define OP_PCL_TLS12_DES40_CBC_SHA 0x0008
+#define OP_PCL_TLS12_DES40_CBC_SHA_2 0x000b
+#define OP_PCL_TLS12_DES40_CBC_SHA_3 0x000e
+#define OP_PCL_TLS12_DES40_CBC_SHA_4 0x0011
+#define OP_PCL_TLS12_DES40_CBC_SHA_5 0x0014
+#define OP_PCL_TLS12_DES40_CBC_SHA_6 0x0019
+#define OP_PCL_TLS12_DES40_CBC_SHA_7 0x0026
+
+#define OP_PCL_TLS12_DES_CBC_SHA 0x001e
+#define OP_PCL_TLS12_DES_CBC_SHA_2 0x0009
+#define OP_PCL_TLS12_DES_CBC_SHA_3 0x000c
+#define OP_PCL_TLS12_DES_CBC_SHA_4 0x000f
+#define OP_PCL_TLS12_DES_CBC_SHA_5 0x0012
+#define OP_PCL_TLS12_DES_CBC_SHA_6 0x0015
+#define OP_PCL_TLS12_DES_CBC_SHA_7 0x001a
+
+#define OP_PCL_TLS12_RC4_128_MD5 0x0024
+#define OP_PCL_TLS12_RC4_128_MD5_2 0x0004
+#define OP_PCL_TLS12_RC4_128_MD5_3 0x0018
+
+#define OP_PCL_TLS12_RC4_40_MD5 0x002b
+#define OP_PCL_TLS12_RC4_40_MD5_2 0x0003
+#define OP_PCL_TLS12_RC4_40_MD5_3 0x0017
+
+#define OP_PCL_TLS12_RC4_128_SHA 0x0020
+#define OP_PCL_TLS12_RC4_128_SHA_2 0x008a
+#define OP_PCL_TLS12_RC4_128_SHA_3 0x008e
+#define OP_PCL_TLS12_RC4_128_SHA_4 0x0092
+#define OP_PCL_TLS12_RC4_128_SHA_5 0x0005
+#define OP_PCL_TLS12_RC4_128_SHA_6 0xc002
+#define OP_PCL_TLS12_RC4_128_SHA_7 0xc007
+#define OP_PCL_TLS12_RC4_128_SHA_8 0xc00c
+#define OP_PCL_TLS12_RC4_128_SHA_9 0xc011
+#define OP_PCL_TLS12_RC4_128_SHA_10 0xc016
+
+#define OP_PCL_TLS12_RC4_40_SHA 0x0028
+
+/* #define OP_PCL_TLS12_AES_128_CBC_SHA256 0x003c */
+#define OP_PCL_TLS12_AES_128_CBC_SHA256_2 0x003e
+#define OP_PCL_TLS12_AES_128_CBC_SHA256_3 0x003f
+#define OP_PCL_TLS12_AES_128_CBC_SHA256_4 0x0040
+#define OP_PCL_TLS12_AES_128_CBC_SHA256_5 0x0067
+#define OP_PCL_TLS12_AES_128_CBC_SHA256_6 0x006c
+
+/* #define OP_PCL_TLS12_AES_256_CBC_SHA256 0x003d */
+#define OP_PCL_TLS12_AES_256_CBC_SHA256_2 0x0068
+#define OP_PCL_TLS12_AES_256_CBC_SHA256_3 0x0069
+#define OP_PCL_TLS12_AES_256_CBC_SHA256_4 0x006a
+#define OP_PCL_TLS12_AES_256_CBC_SHA256_5 0x006b
+#define OP_PCL_TLS12_AES_256_CBC_SHA256_6 0x006d
+
+/* AEAD_AES_xxx_CCM/GCM remain to be defined... */
+
+#define OP_PCL_TLS12_3DES_EDE_CBC_MD5 0xff23
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA160 0xff30
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA224 0xff34
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA256 0xff36
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA384 0xff33
+#define OP_PCL_TLS12_3DES_EDE_CBC_SHA512 0xff35
+#define OP_PCL_TLS12_AES_128_CBC_SHA160 0xff80
+#define OP_PCL_TLS12_AES_128_CBC_SHA224 0xff84
+#define OP_PCL_TLS12_AES_128_CBC_SHA256 0xff86
+#define OP_PCL_TLS12_AES_128_CBC_SHA384 0xff83
+#define OP_PCL_TLS12_AES_128_CBC_SHA512 0xff85
+#define OP_PCL_TLS12_AES_192_CBC_SHA160 0xff20
+#define OP_PCL_TLS12_AES_192_CBC_SHA224 0xff24
+#define OP_PCL_TLS12_AES_192_CBC_SHA256 0xff26
+#define OP_PCL_TLS12_AES_192_CBC_SHA384 0xff23
+#define OP_PCL_TLS12_AES_192_CBC_SHA512 0xff25
+#define OP_PCL_TLS12_AES_256_CBC_SHA160 0xff60
+#define OP_PCL_TLS12_AES_256_CBC_SHA224 0xff64
+#define OP_PCL_TLS12_AES_256_CBC_SHA256 0xff66
+#define OP_PCL_TLS12_AES_256_CBC_SHA384 0xff63
+#define OP_PCL_TLS12_AES_256_CBC_SHA512 0xff65
+
+/* For DTLS - OP_PCLID_DTLS */
+
+#define OP_PCL_DTLS_AES_128_CBC_SHA 0x002f
+#define OP_PCL_DTLS_AES_128_CBC_SHA_2 0x0030
+#define OP_PCL_DTLS_AES_128_CBC_SHA_3 0x0031
+#define OP_PCL_DTLS_AES_128_CBC_SHA_4 0x0032
+#define OP_PCL_DTLS_AES_128_CBC_SHA_5 0x0033
+#define OP_PCL_DTLS_AES_128_CBC_SHA_6 0x0034
+#define OP_PCL_DTLS_AES_128_CBC_SHA_7 0x008c
+#define OP_PCL_DTLS_AES_128_CBC_SHA_8 0x0090
+#define OP_PCL_DTLS_AES_128_CBC_SHA_9 0x0094
+#define OP_PCL_DTLS_AES_128_CBC_SHA_10 0xc004
+#define OP_PCL_DTLS_AES_128_CBC_SHA_11 0xc009
+#define OP_PCL_DTLS_AES_128_CBC_SHA_12 0xc00e
+#define OP_PCL_DTLS_AES_128_CBC_SHA_13 0xc013
+#define OP_PCL_DTLS_AES_128_CBC_SHA_14 0xc018
+#define OP_PCL_DTLS_AES_128_CBC_SHA_15 0xc01d
+#define OP_PCL_DTLS_AES_128_CBC_SHA_16 0xc01e
+#define OP_PCL_DTLS_AES_128_CBC_SHA_17 0xc01f
+
+#define OP_PCL_DTLS_AES_256_CBC_SHA 0x0035
+#define OP_PCL_DTLS_AES_256_CBC_SHA_2 0x0036
+#define OP_PCL_DTLS_AES_256_CBC_SHA_3 0x0037
+#define OP_PCL_DTLS_AES_256_CBC_SHA_4 0x0038
+#define OP_PCL_DTLS_AES_256_CBC_SHA_5 0x0039
+#define OP_PCL_DTLS_AES_256_CBC_SHA_6 0x003a
+#define OP_PCL_DTLS_AES_256_CBC_SHA_7 0x008d
+#define OP_PCL_DTLS_AES_256_CBC_SHA_8 0x0091
+#define OP_PCL_DTLS_AES_256_CBC_SHA_9 0x0095
+#define OP_PCL_DTLS_AES_256_CBC_SHA_10 0xc005
+#define OP_PCL_DTLS_AES_256_CBC_SHA_11 0xc00a
+#define OP_PCL_DTLS_AES_256_CBC_SHA_12 0xc00f
+#define OP_PCL_DTLS_AES_256_CBC_SHA_13 0xc014
+#define OP_PCL_DTLS_AES_256_CBC_SHA_14 0xc019
+#define OP_PCL_DTLS_AES_256_CBC_SHA_15 0xc020
+#define OP_PCL_DTLS_AES_256_CBC_SHA_16 0xc021
+#define OP_PCL_DTLS_AES_256_CBC_SHA_17 0xc022
+
+/* #define OP_PCL_DTLS_3DES_EDE_CBC_MD5 0x0023 */
+
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA 0x001f
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_2 0x008b
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_3 0x008f
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_4 0x0093
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_5 0x000a
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_6 0x000d
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_7 0x0010
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_8 0x0013
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_9 0x0016
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_10 0x001b
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_11 0xc003
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_12 0xc008
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_13 0xc00d
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_14 0xc012
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_15 0xc017
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_16 0xc01a
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_17 0xc01b
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA_18 0xc01c
+
+#define OP_PCL_DTLS_DES40_CBC_MD5 0x0029
+
+#define OP_PCL_DTLS_DES_CBC_MD5 0x0022
+
+#define OP_PCL_DTLS_DES40_CBC_SHA 0x0008
+#define OP_PCL_DTLS_DES40_CBC_SHA_2 0x000b
+#define OP_PCL_DTLS_DES40_CBC_SHA_3 0x000e
+#define OP_PCL_DTLS_DES40_CBC_SHA_4 0x0011
+#define OP_PCL_DTLS_DES40_CBC_SHA_5 0x0014
+#define OP_PCL_DTLS_DES40_CBC_SHA_6 0x0019
+#define OP_PCL_DTLS_DES40_CBC_SHA_7 0x0026
+
+
+#define OP_PCL_DTLS_DES_CBC_SHA 0x001e
+#define OP_PCL_DTLS_DES_CBC_SHA_2 0x0009
+#define OP_PCL_DTLS_DES_CBC_SHA_3 0x000c
+#define OP_PCL_DTLS_DES_CBC_SHA_4 0x000f
+#define OP_PCL_DTLS_DES_CBC_SHA_5 0x0012
+#define OP_PCL_DTLS_DES_CBC_SHA_6 0x0015
+#define OP_PCL_DTLS_DES_CBC_SHA_7 0x001a
+
+#define OP_PCL_DTLS_3DES_EDE_CBC_MD5 0xff23
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA160 0xff30
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA224 0xff34
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA256 0xff36
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA384 0xff33
+#define OP_PCL_DTLS_3DES_EDE_CBC_SHA512 0xff35
+#define OP_PCL_DTLS_AES_128_CBC_SHA160 0xff80
+#define OP_PCL_DTLS_AES_128_CBC_SHA224 0xff84
+#define OP_PCL_DTLS_AES_128_CBC_SHA256 0xff86
+#define OP_PCL_DTLS_AES_128_CBC_SHA384 0xff83
+#define OP_PCL_DTLS_AES_128_CBC_SHA512 0xff85
+#define OP_PCL_DTLS_AES_192_CBC_SHA160 0xff20
+#define OP_PCL_DTLS_AES_192_CBC_SHA224 0xff24
+#define OP_PCL_DTLS_AES_192_CBC_SHA256 0xff26
+#define OP_PCL_DTLS_AES_192_CBC_SHA384 0xff23
+#define OP_PCL_DTLS_AES_192_CBC_SHA512 0xff25
+#define OP_PCL_DTLS_AES_256_CBC_SHA160 0xff60
+#define OP_PCL_DTLS_AES_256_CBC_SHA224 0xff64
+#define OP_PCL_DTLS_AES_256_CBC_SHA256 0xff66
+#define OP_PCL_DTLS_AES_256_CBC_SHA384 0xff63
+#define OP_PCL_DTLS_AES_256_CBC_SHA512 0xff65
+
+/* 802.16 WiMAX protinfos */
+#define OP_PCL_WIMAX_OFDM 0x0201
+#define OP_PCL_WIMAX_OFDMA 0x0231
+
+/* 802.11 WiFi protinfos */
+#define OP_PCL_WIFI 0xac04
+
+/* MacSec protinfos */
+#define OP_PCL_MACSEC 0x0001
+
+/* 3G DCRC protinfos */
+#define OP_PCL_3G_DCRC_CRC7 0x0710
+#define OP_PCL_3G_DCRC_CRC11 0x0B10
+
+/* 3G RLC protinfos */
+#define OP_PCL_3G_RLC_NULL 0x0000
+#define OP_PCL_3G_RLC_KASUMI 0x0001
+#define OP_PCL_3G_RLC_SNOW 0x0002
+
+/* LTE protinfos */
+#define OP_PCL_LTE_NULL 0x0000
+#define OP_PCL_LTE_SNOW 0x0001
+#define OP_PCL_LTE_AES 0x0002
+#define OP_PCL_LTE_ZUC 0x0003
+
+/* LTE mixed protinfos */
+#define OP_PCL_LTE_MIXED_AUTH_SHIFT 0
+#define OP_PCL_LTE_MIXED_AUTH_MASK (3 << OP_PCL_LTE_MIXED_AUTH_SHIFT)
+#define OP_PCL_LTE_MIXED_ENC_SHIFT 8
+#define OP_PCL_LTE_MIXED_ENC_MASK (3 < OP_PCL_LTE_MIXED_ENC_SHIFT)
+#define OP_PCL_LTE_MIXED_AUTH_NULL (OP_PCL_LTE_NULL << \
+ OP_PCL_LTE_MIXED_AUTH_SHIFT)
+#define OP_PCL_LTE_MIXED_AUTH_SNOW (OP_PCL_LTE_SNOW << \
+ OP_PCL_LTE_MIXED_AUTH_SHIFT)
+#define OP_PCL_LTE_MIXED_AUTH_AES (OP_PCL_LTE_AES << \
+ OP_PCL_LTE_MIXED_AUTH_SHIFT)
+#define OP_PCL_LTE_MIXED_AUTH_ZUC (OP_PCL_LTE_ZUC << \
+ OP_PCL_LTE_MIXED_AUTH_SHIFT)
+#define OP_PCL_LTE_MIXED_ENC_NULL (OP_PCL_LTE_NULL << \
+ OP_PCL_LTE_MIXED_ENC_SHIFT)
+#define OP_PCL_LTE_MIXED_ENC_SNOW (OP_PCL_LTE_SNOW << \
+ OP_PCL_LTE_MIXED_ENC_SHIFT)
+#define OP_PCL_LTE_MIXED_ENC_AES (OP_PCL_LTE_AES << \
+ OP_PCL_LTE_MIXED_ENC_SHIFT)
+#define OP_PCL_LTE_MIXED_ENC_ZUC (OP_PCL_LTE_ZUC << \
+ OP_PCL_LTE_MIXED_ENC_SHIFT)
+
+/* PKI unidirectional protocol protinfo bits */
+#define OP_PCL_PKPROT_DSA_MSG BIT(10)
+#define OP_PCL_PKPROT_HASH_SHIFT 7
+#define OP_PCL_PKPROT_HASH_MASK (7 << OP_PCL_PKPROT_HASH_SHIFT)
+#define OP_PCL_PKPROT_HASH_MD5 (0 << OP_PCL_PKPROT_HASH_SHIFT)
+#define OP_PCL_PKPROT_HASH_SHA1 (1 << OP_PCL_PKPROT_HASH_SHIFT)
+#define OP_PCL_PKPROT_HASH_SHA224 (2 << OP_PCL_PKPROT_HASH_SHIFT)
+#define OP_PCL_PKPROT_HASH_SHA256 (3 << OP_PCL_PKPROT_HASH_SHIFT)
+#define OP_PCL_PKPROT_HASH_SHA384 (4 << OP_PCL_PKPROT_HASH_SHIFT)
+#define OP_PCL_PKPROT_HASH_SHA512 (5 << OP_PCL_PKPROT_HASH_SHIFT)
+#define OP_PCL_PKPROT_EKT_Z BIT(6)
+#define OP_PCL_PKPROT_DECRYPT_Z BIT(5)
+#define OP_PCL_PKPROT_EKT_PRI BIT(4)
+#define OP_PCL_PKPROT_TEST BIT(3)
+#define OP_PCL_PKPROT_DECRYPT_PRI BIT(2)
+#define OP_PCL_PKPROT_ECC BIT(1)
+#define OP_PCL_PKPROT_F2M BIT(0)
+
+/* Blob protinfos */
+#define OP_PCL_BLOB_TKEK_SHIFT 9
+#define OP_PCL_BLOB_TKEK BIT(9)
+#define OP_PCL_BLOB_EKT_SHIFT 8
+#define OP_PCL_BLOB_EKT BIT(8)
+#define OP_PCL_BLOB_REG_SHIFT 4
+#define OP_PCL_BLOB_REG_MASK (0xF << OP_PCL_BLOB_REG_SHIFT)
+#define OP_PCL_BLOB_REG_MEMORY (0x0 << OP_PCL_BLOB_REG_SHIFT)
+#define OP_PCL_BLOB_REG_KEY1 (0x1 << OP_PCL_BLOB_REG_SHIFT)
+#define OP_PCL_BLOB_REG_KEY2 (0x3 << OP_PCL_BLOB_REG_SHIFT)
+#define OP_PCL_BLOB_AFHA_SBOX (0x5 << OP_PCL_BLOB_REG_SHIFT)
+#define OP_PCL_BLOB_REG_SPLIT (0x7 << OP_PCL_BLOB_REG_SHIFT)
+#define OP_PCL_BLOB_REG_PKE (0x9 << OP_PCL_BLOB_REG_SHIFT)
+#define OP_PCL_BLOB_SEC_MEM_SHIFT 3
+#define OP_PCL_BLOB_SEC_MEM BIT(3)
+#define OP_PCL_BLOB_BLACK BIT(2)
+#define OP_PCL_BLOB_FORMAT_SHIFT 0
+#define OP_PCL_BLOB_FORMAT_MASK 0x3
+#define OP_PCL_BLOB_FORMAT_NORMAL 0
+#define OP_PCL_BLOB_FORMAT_MASTER_VER 2
+#define OP_PCL_BLOB_FORMAT_TEST 3
+
+/* IKE / IKEv2 protinfos */
+#define OP_PCL_IKE_HMAC_MD5 0x0100
+#define OP_PCL_IKE_HMAC_SHA1 0x0200
+#define OP_PCL_IKE_HMAC_AES128_CBC 0x0400
+#define OP_PCL_IKE_HMAC_SHA256 0x0500
+#define OP_PCL_IKE_HMAC_SHA384 0x0600
+#define OP_PCL_IKE_HMAC_SHA512 0x0700
+#define OP_PCL_IKE_HMAC_AES128_CMAC 0x0800
+
+/* PKI unidirectional protocol protinfo bits */
+#define OP_PCL_PKPROT_TEST BIT(3)
+#define OP_PCL_PKPROT_DECRYPT BIT(2)
+#define OP_PCL_PKPROT_ECC BIT(1)
+#define OP_PCL_PKPROT_F2M BIT(0)
+
+/* RSA Protinfo */
+#define OP_PCL_RSAPROT_OP_MASK 3
+#define OP_PCL_RSAPROT_OP_ENC_F_IN 0
+#define OP_PCL_RSAPROT_OP_ENC_F_OUT 1
+#define OP_PCL_RSAPROT_OP_DEC_ND 0
+#define OP_PCL_RSAPROT_OP_DEC_PQD 1
+#define OP_PCL_RSAPROT_OP_DEC_PQDPDQC 2
+#define OP_PCL_RSAPROT_FFF_SHIFT 4
+#define OP_PCL_RSAPROT_FFF_MASK (7 << OP_PCL_RSAPROT_FFF_SHIFT)
+#define OP_PCL_RSAPROT_FFF_RED (0 << OP_PCL_RSAPROT_FFF_SHIFT)
+#define OP_PCL_RSAPROT_FFF_ENC (1 << OP_PCL_RSAPROT_FFF_SHIFT)
+#define OP_PCL_RSAPROT_FFF_TK_ENC (5 << OP_PCL_RSAPROT_FFF_SHIFT)
+#define OP_PCL_RSAPROT_FFF_EKT (3 << OP_PCL_RSAPROT_FFF_SHIFT)
+#define OP_PCL_RSAPROT_FFF_TK_EKT (7 << OP_PCL_RSAPROT_FFF_SHIFT)
+#define OP_PCL_RSAPROT_PPP_SHIFT 8
+#define OP_PCL_RSAPROT_PPP_MASK (7 << OP_PCL_RSAPROT_PPP_SHIFT)
+#define OP_PCL_RSAPROT_PPP_RED (0 << OP_PCL_RSAPROT_PPP_SHIFT)
+#define OP_PCL_RSAPROT_PPP_ENC (1 << OP_PCL_RSAPROT_PPP_SHIFT)
+#define OP_PCL_RSAPROT_PPP_TK_ENC (5 << OP_PCL_RSAPROT_PPP_SHIFT)
+#define OP_PCL_RSAPROT_PPP_EKT (3 << OP_PCL_RSAPROT_PPP_SHIFT)
+#define OP_PCL_RSAPROT_PPP_TK_EKT (7 << OP_PCL_RSAPROT_PPP_SHIFT)
+#define OP_PCL_RSAPROT_FMT_PKCSV15 BIT(12)
+
+/* Derived Key Protocol (DKP) Protinfo */
+#define OP_PCL_DKP_SRC_SHIFT 14
+#define OP_PCL_DKP_SRC_MASK (3 << OP_PCL_DKP_SRC_SHIFT)
+#define OP_PCL_DKP_SRC_IMM (0 << OP_PCL_DKP_SRC_SHIFT)
+#define OP_PCL_DKP_SRC_SEQ (1 << OP_PCL_DKP_SRC_SHIFT)
+#define OP_PCL_DKP_SRC_PTR (2 << OP_PCL_DKP_SRC_SHIFT)
+#define OP_PCL_DKP_SRC_SGF (3 << OP_PCL_DKP_SRC_SHIFT)
+#define OP_PCL_DKP_DST_SHIFT 12
+#define OP_PCL_DKP_DST_MASK (3 << OP_PCL_DKP_DST_SHIFT)
+#define OP_PCL_DKP_DST_IMM (0 << OP_PCL_DKP_DST_SHIFT)
+#define OP_PCL_DKP_DST_SEQ (1 << OP_PCL_DKP_DST_SHIFT)
+#define OP_PCL_DKP_DST_PTR (2 << OP_PCL_DKP_DST_SHIFT)
+#define OP_PCL_DKP_DST_SGF (3 << OP_PCL_DKP_DST_SHIFT)
+#define OP_PCL_DKP_KEY_SHIFT 0
+#define OP_PCL_DKP_KEY_MASK (0xfff << OP_PCL_DKP_KEY_SHIFT)
+
+/* For non-protocol/alg-only op commands */
+#define OP_ALG_TYPE_SHIFT 24
+#define OP_ALG_TYPE_MASK (0x7 << OP_ALG_TYPE_SHIFT)
+#define OP_ALG_TYPE_CLASS1 (0x2 << OP_ALG_TYPE_SHIFT)
+#define OP_ALG_TYPE_CLASS2 (0x4 << OP_ALG_TYPE_SHIFT)
+
+#define OP_ALG_ALGSEL_SHIFT 16
+#define OP_ALG_ALGSEL_MASK (0xff << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SUBMASK (0x0f << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_AES (0x10 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_DES (0x20 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_3DES (0x21 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_ARC4 (0x30 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_MD5 (0x40 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SHA1 (0x41 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SHA224 (0x42 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SHA256 (0x43 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SHA384 (0x44 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SHA512 (0x45 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_RNG (0x50 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SNOW_F8 (0x60 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_KASUMI (0x70 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_CRC (0x90 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_SNOW_F9 (0xA0 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_ZUCE (0xB0 << OP_ALG_ALGSEL_SHIFT)
+#define OP_ALG_ALGSEL_ZUCA (0xC0 << OP_ALG_ALGSEL_SHIFT)
+
+#define OP_ALG_AAI_SHIFT 4
+#define OP_ALG_AAI_MASK (0x3ff << OP_ALG_AAI_SHIFT)
+
+/* block cipher AAI set */
+#define OP_ALG_AESA_MODE_MASK (0xF0 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR (0x00 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD128 (0x00 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD8 (0x01 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD16 (0x02 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD24 (0x03 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD32 (0x04 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD40 (0x05 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD48 (0x06 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD56 (0x07 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD64 (0x08 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD72 (0x09 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD80 (0x0a << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD88 (0x0b << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD96 (0x0c << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD104 (0x0d << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD112 (0x0e << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_MOD120 (0x0f << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CBC (0x10 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_ECB (0x20 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CFB (0x30 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_OFB (0x40 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_XTS (0x50 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CMAC (0x60 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_XCBC_MAC (0x70 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CCM (0x80 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_GCM (0x90 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CBC_XCBCMAC (0xa0 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_XCBCMAC (0xb0 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CBC_CMAC (0xc0 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_CMAC_LTE (0xd0 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CTR_CMAC (0xe0 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CHECKODD (0x80 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_DK (0x100 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_C2K (0x200 << OP_ALG_AAI_SHIFT)
+
+/* randomizer AAI set */
+#define OP_ALG_RNG_MODE_MASK (0x30 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG (0x00 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG_NZB (0x10 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG_OBP (0x20 << OP_ALG_AAI_SHIFT)
+
+/* RNG4 AAI set */
+#define OP_ALG_AAI_RNG4_SH_SHIFT OP_ALG_AAI_SHIFT
+#define OP_ALG_AAI_RNG4_SH_MASK (0x03 << OP_ALG_AAI_RNG4_SH_SHIFT)
+#define OP_ALG_AAI_RNG4_SH_0 (0x00 << OP_ALG_AAI_RNG4_SH_SHIFT)
+#define OP_ALG_AAI_RNG4_SH_1 (0x01 << OP_ALG_AAI_RNG4_SH_SHIFT)
+#define OP_ALG_AAI_RNG4_PS (0x40 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_AI (0x80 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_RNG4_SK (0x100 << OP_ALG_AAI_SHIFT)
+
+/* hmac/smac AAI set */
+#define OP_ALG_AAI_HASH (0x00 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_HMAC (0x01 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_SMAC (0x02 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_HMAC_PRECOMP (0x04 << OP_ALG_AAI_SHIFT)
+
+/* CRC AAI set*/
+#define OP_ALG_CRC_POLY_MASK (0x07 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_802 (0x01 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_3385 (0x02 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_CUST_POLY (0x04 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_DIS (0x10 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_DOS (0x20 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_DOC (0x40 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_IVZ (0x80 << OP_ALG_AAI_SHIFT)
+
+/* Kasumi/SNOW/ZUC AAI set */
+#define OP_ALG_AAI_F8 (0xc0 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_F9 (0xc8 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_GSM (0x10 << OP_ALG_AAI_SHIFT)
+#define OP_ALG_AAI_EDGE (0x20 << OP_ALG_AAI_SHIFT)
+
+#define OP_ALG_AS_SHIFT 2
+#define OP_ALG_AS_MASK (0x3 << OP_ALG_AS_SHIFT)
+#define OP_ALG_AS_UPDATE (0 << OP_ALG_AS_SHIFT)
+#define OP_ALG_AS_INIT (1 << OP_ALG_AS_SHIFT)
+#define OP_ALG_AS_FINALIZE (2 << OP_ALG_AS_SHIFT)
+#define OP_ALG_AS_INITFINAL (3 << OP_ALG_AS_SHIFT)
+
+#define OP_ALG_ICV_SHIFT 1
+#define OP_ALG_ICV_MASK (1 << OP_ALG_ICV_SHIFT)
+#define OP_ALG_ICV_OFF 0
+#define OP_ALG_ICV_ON BIT(1)
+
+#define OP_ALG_DIR_SHIFT 0
+#define OP_ALG_DIR_MASK 1
+#define OP_ALG_DECRYPT 0
+#define OP_ALG_ENCRYPT BIT(0)
+
+/* PKHA algorithm type set */
+#define OP_ALG_PK 0x00800000
+#define OP_ALG_PK_FUN_MASK 0x3f /* clrmem, modmath, or cpymem */
+
+/* PKHA mode clear memory functions */
+#define OP_ALG_PKMODE_A_RAM BIT(19)
+#define OP_ALG_PKMODE_B_RAM BIT(18)
+#define OP_ALG_PKMODE_E_RAM BIT(17)
+#define OP_ALG_PKMODE_N_RAM BIT(16)
+#define OP_ALG_PKMODE_CLEARMEM BIT(0)
+
+/* PKHA mode clear memory functions */
+#define OP_ALG_PKMODE_CLEARMEM_ALL (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_A_RAM | \
+ OP_ALG_PKMODE_B_RAM | \
+ OP_ALG_PKMODE_N_RAM | \
+ OP_ALG_PKMODE_E_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_ABE (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_A_RAM | \
+ OP_ALG_PKMODE_B_RAM | \
+ OP_ALG_PKMODE_E_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_ABN (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_A_RAM | \
+ OP_ALG_PKMODE_B_RAM | \
+ OP_ALG_PKMODE_N_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_AB (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_A_RAM | \
+ OP_ALG_PKMODE_B_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_AEN (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_A_RAM | \
+ OP_ALG_PKMODE_E_RAM | \
+ OP_ALG_PKMODE_N_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_AE (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_A_RAM | \
+ OP_ALG_PKMODE_E_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_AN (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_A_RAM | \
+ OP_ALG_PKMODE_N_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_A (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_A_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_BEN (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_B_RAM | \
+ OP_ALG_PKMODE_E_RAM | \
+ OP_ALG_PKMODE_N_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_BE (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_B_RAM | \
+ OP_ALG_PKMODE_E_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_BN (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_B_RAM | \
+ OP_ALG_PKMODE_N_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_B (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_B_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_EN (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_E_RAM | \
+ OP_ALG_PKMODE_N_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_E (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_E_RAM)
+#define OP_ALG_PKMODE_CLEARMEM_N (OP_ALG_PKMODE_CLEARMEM | \
+ OP_ALG_PKMODE_N_RAM)
+
+/* PKHA mode modular-arithmetic functions */
+#define OP_ALG_PKMODE_MOD_IN_MONTY BIT(19)
+#define OP_ALG_PKMODE_MOD_OUT_MONTY BIT(18)
+#define OP_ALG_PKMODE_MOD_F2M BIT(17)
+#define OP_ALG_PKMODE_MOD_R2_IN BIT(16)
+#define OP_ALG_PKMODE_PRJECTV BIT(11)
+#define OP_ALG_PKMODE_TIME_EQ BIT(10)
+
+#define OP_ALG_PKMODE_OUT_B 0x000
+#define OP_ALG_PKMODE_OUT_A 0x100
+
+/*
+ * PKHA mode modular-arithmetic integer functions
+ * Can be ORed with OP_ALG_PKMODE_OUT_A to change destination from B
+ */
+#define OP_ALG_PKMODE_MOD_ADD 0x002
+#define OP_ALG_PKMODE_MOD_SUB_AB 0x003
+#define OP_ALG_PKMODE_MOD_SUB_BA 0x004
+#define OP_ALG_PKMODE_MOD_MULT 0x005
+#define OP_ALG_PKMODE_MOD_MULT_IM (0x005 | OP_ALG_PKMODE_MOD_IN_MONTY)
+#define OP_ALG_PKMODE_MOD_MULT_IM_OM (0x005 | OP_ALG_PKMODE_MOD_IN_MONTY \
+ | OP_ALG_PKMODE_MOD_OUT_MONTY)
+#define OP_ALG_PKMODE_MOD_EXPO 0x006
+#define OP_ALG_PKMODE_MOD_EXPO_TEQ (0x006 | OP_ALG_PKMODE_TIME_EQ)
+#define OP_ALG_PKMODE_MOD_EXPO_IM (0x006 | OP_ALG_PKMODE_MOD_IN_MONTY)
+#define OP_ALG_PKMODE_MOD_EXPO_IM_TEQ (0x006 | OP_ALG_PKMODE_MOD_IN_MONTY \
+ | OP_ALG_PKMODE_TIME_EQ)
+#define OP_ALG_PKMODE_MOD_REDUCT 0x007
+#define OP_ALG_PKMODE_MOD_INV 0x008
+#define OP_ALG_PKMODE_MOD_ECC_ADD 0x009
+#define OP_ALG_PKMODE_MOD_ECC_DBL 0x00a
+#define OP_ALG_PKMODE_MOD_ECC_MULT 0x00b
+#define OP_ALG_PKMODE_MOD_MONT_CNST 0x00c
+#define OP_ALG_PKMODE_MOD_CRT_CNST 0x00d
+#define OP_ALG_PKMODE_MOD_GCD 0x00e
+#define OP_ALG_PKMODE_MOD_PRIMALITY 0x00f
+#define OP_ALG_PKMODE_MOD_SML_EXP 0x016
+
+/*
+ * PKHA mode modular-arithmetic F2m functions
+ * Can be ORed with OP_ALG_PKMODE_OUT_A to change destination from B
+ */
+#define OP_ALG_PKMODE_F2M_ADD (0x002 | OP_ALG_PKMODE_MOD_F2M)
+#define OP_ALG_PKMODE_F2M_MUL (0x005 | OP_ALG_PKMODE_MOD_F2M)
+#define OP_ALG_PKMODE_F2M_MUL_IM (0x005 | OP_ALG_PKMODE_MOD_F2M \
+ | OP_ALG_PKMODE_MOD_IN_MONTY)
+#define OP_ALG_PKMODE_F2M_MUL_IM_OM (0x005 | OP_ALG_PKMODE_MOD_F2M \
+ | OP_ALG_PKMODE_MOD_IN_MONTY \
+ | OP_ALG_PKMODE_MOD_OUT_MONTY)
+#define OP_ALG_PKMODE_F2M_EXP (0x006 | OP_ALG_PKMODE_MOD_F2M)
+#define OP_ALG_PKMODE_F2M_EXP_TEQ (0x006 | OP_ALG_PKMODE_MOD_F2M \
+ | OP_ALG_PKMODE_TIME_EQ)
+#define OP_ALG_PKMODE_F2M_AMODN (0x007 | OP_ALG_PKMODE_MOD_F2M)
+#define OP_ALG_PKMODE_F2M_INV (0x008 | OP_ALG_PKMODE_MOD_F2M)
+#define OP_ALG_PKMODE_F2M_R2 (0x00c | OP_ALG_PKMODE_MOD_F2M)
+#define OP_ALG_PKMODE_F2M_GCD (0x00e | OP_ALG_PKMODE_MOD_F2M)
+#define OP_ALG_PKMODE_F2M_SML_EXP (0x016 | OP_ALG_PKMODE_MOD_F2M)
+
+/*
+ * PKHA mode ECC Integer arithmetic functions
+ * Can be ORed with OP_ALG_PKMODE_OUT_A to change destination from B
+ */
+#define OP_ALG_PKMODE_ECC_MOD_ADD 0x009
+#define OP_ALG_PKMODE_ECC_MOD_ADD_IM_OM_PROJ \
+ (0x009 | OP_ALG_PKMODE_MOD_IN_MONTY \
+ | OP_ALG_PKMODE_MOD_OUT_MONTY \
+ | OP_ALG_PKMODE_PRJECTV)
+#define OP_ALG_PKMODE_ECC_MOD_DBL 0x00a
+#define OP_ALG_PKMODE_ECC_MOD_DBL_IM_OM_PROJ \
+ (0x00a | OP_ALG_PKMODE_MOD_IN_MONTY \
+ | OP_ALG_PKMODE_MOD_OUT_MONTY \
+ | OP_ALG_PKMODE_PRJECTV)
+#define OP_ALG_PKMODE_ECC_MOD_MUL 0x00b
+#define OP_ALG_PKMODE_ECC_MOD_MUL_TEQ (0x00b | OP_ALG_PKMODE_TIME_EQ)
+#define OP_ALG_PKMODE_ECC_MOD_MUL_R2 (0x00b | OP_ALG_PKMODE_MOD_R2_IN)
+#define OP_ALG_PKMODE_ECC_MOD_MUL_R2_TEQ \
+ (0x00b | OP_ALG_PKMODE_MOD_R2_IN \
+ | OP_ALG_PKMODE_TIME_EQ)
+#define OP_ALG_PKMODE_ECC_MOD_MUL_R2_PROJ \
+ (0x00b | OP_ALG_PKMODE_MOD_R2_IN \
+ | OP_ALG_PKMODE_PRJECTV)
+#define OP_ALG_PKMODE_ECC_MOD_MUL_R2_PROJ_TEQ \
+ (0x00b | OP_ALG_PKMODE_MOD_R2_IN \
+ | OP_ALG_PKMODE_PRJECTV \
+ | OP_ALG_PKMODE_TIME_EQ)
+
+/*
+ * PKHA mode ECC F2m arithmetic functions
+ * Can be ORed with OP_ALG_PKMODE_OUT_A to change destination from B
+ */
+#define OP_ALG_PKMODE_ECC_F2M_ADD (0x009 | OP_ALG_PKMODE_MOD_F2M)
+#define OP_ALG_PKMODE_ECC_F2M_ADD_IM_OM_PROJ \
+ (0x009 | OP_ALG_PKMODE_MOD_F2M \
+ | OP_ALG_PKMODE_MOD_IN_MONTY \
+ | OP_ALG_PKMODE_MOD_OUT_MONTY \
+ | OP_ALG_PKMODE_PRJECTV)
+#define OP_ALG_PKMODE_ECC_F2M_DBL (0x00a | OP_ALG_PKMODE_MOD_F2M)
+#define OP_ALG_PKMODE_ECC_F2M_DBL_IM_OM_PROJ \
+ (0x00a | OP_ALG_PKMODE_MOD_F2M \
+ | OP_ALG_PKMODE_MOD_IN_MONTY \
+ | OP_ALG_PKMODE_MOD_OUT_MONTY \
+ | OP_ALG_PKMODE_PRJECTV)
+#define OP_ALG_PKMODE_ECC_F2M_MUL (0x00b | OP_ALG_PKMODE_MOD_F2M)
+#define OP_ALG_PKMODE_ECC_F2M_MUL_TEQ \
+ (0x00b | OP_ALG_PKMODE_MOD_F2M \
+ | OP_ALG_PKMODE_TIME_EQ)
+#define OP_ALG_PKMODE_ECC_F2M_MUL_R2 \
+ (0x00b | OP_ALG_PKMODE_MOD_F2M \
+ | OP_ALG_PKMODE_MOD_R2_IN)
+#define OP_ALG_PKMODE_ECC_F2M_MUL_R2_TEQ \
+ (0x00b | OP_ALG_PKMODE_MOD_F2M \
+ | OP_ALG_PKMODE_MOD_R2_IN \
+ | OP_ALG_PKMODE_TIME_EQ)
+#define OP_ALG_PKMODE_ECC_F2M_MUL_R2_PROJ \
+ (0x00b | OP_ALG_PKMODE_MOD_F2M \
+ | OP_ALG_PKMODE_MOD_R2_IN \
+ | OP_ALG_PKMODE_PRJECTV)
+#define OP_ALG_PKMODE_ECC_F2M_MUL_R2_PROJ_TEQ \
+ (0x00b | OP_ALG_PKMODE_MOD_F2M \
+ | OP_ALG_PKMODE_MOD_R2_IN \
+ | OP_ALG_PKMODE_PRJECTV \
+ | OP_ALG_PKMODE_TIME_EQ)
+
+/* PKHA mode copy-memory functions */
+#define OP_ALG_PKMODE_SRC_REG_SHIFT 17
+#define OP_ALG_PKMODE_SRC_REG_MASK (7 << OP_ALG_PKMODE_SRC_REG_SHIFT)
+#define OP_ALG_PKMODE_DST_REG_SHIFT 10
+#define OP_ALG_PKMODE_DST_REG_MASK (7 << OP_ALG_PKMODE_DST_REG_SHIFT)
+#define OP_ALG_PKMODE_SRC_SEG_SHIFT 8
+#define OP_ALG_PKMODE_SRC_SEG_MASK (3 << OP_ALG_PKMODE_SRC_SEG_SHIFT)
+#define OP_ALG_PKMODE_DST_SEG_SHIFT 6
+#define OP_ALG_PKMODE_DST_SEG_MASK (3 << OP_ALG_PKMODE_DST_SEG_SHIFT)
+
+#define OP_ALG_PKMODE_SRC_REG_A (0 << OP_ALG_PKMODE_SRC_REG_SHIFT)
+#define OP_ALG_PKMODE_SRC_REG_B (1 << OP_ALG_PKMODE_SRC_REG_SHIFT)
+#define OP_ALG_PKMODE_SRC_REG_N (3 << OP_ALG_PKMODE_SRC_REG_SHIFT)
+#define OP_ALG_PKMODE_DST_REG_A (0 << OP_ALG_PKMODE_DST_REG_SHIFT)
+#define OP_ALG_PKMODE_DST_REG_B (1 << OP_ALG_PKMODE_DST_REG_SHIFT)
+#define OP_ALG_PKMODE_DST_REG_E (2 << OP_ALG_PKMODE_DST_REG_SHIFT)
+#define OP_ALG_PKMODE_DST_REG_N (3 << OP_ALG_PKMODE_DST_REG_SHIFT)
+#define OP_ALG_PKMODE_SRC_SEG_0 (0 << OP_ALG_PKMODE_SRC_SEG_SHIFT)
+#define OP_ALG_PKMODE_SRC_SEG_1 (1 << OP_ALG_PKMODE_SRC_SEG_SHIFT)
+#define OP_ALG_PKMODE_SRC_SEG_2 (2 << OP_ALG_PKMODE_SRC_SEG_SHIFT)
+#define OP_ALG_PKMODE_SRC_SEG_3 (3 << OP_ALG_PKMODE_SRC_SEG_SHIFT)
+#define OP_ALG_PKMODE_DST_SEG_0 (0 << OP_ALG_PKMODE_DST_SEG_SHIFT)
+#define OP_ALG_PKMODE_DST_SEG_1 (1 << OP_ALG_PKMODE_DST_SEG_SHIFT)
+#define OP_ALG_PKMODE_DST_SEG_2 (2 << OP_ALG_PKMODE_DST_SEG_SHIFT)
+#define OP_ALG_PKMODE_DST_SEG_3 (3 << OP_ALG_PKMODE_DST_SEG_SHIFT)
+
+/* PKHA mode copy-memory functions - amount based on N SIZE */
+#define OP_ALG_PKMODE_COPY_NSZ 0x10
+#define OP_ALG_PKMODE_COPY_NSZ_A0_B0 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_B)
+#define OP_ALG_PKMODE_COPY_NSZ_A0_B1 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_NSZ_A0_B2 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_NSZ_A0_B3 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_NSZ_A1_B0 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_B)
+#define OP_ALG_PKMODE_COPY_NSZ_A1_B1 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_NSZ_A1_B2 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_NSZ_A1_B3 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_NSZ_A2_B0 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_B)
+#define OP_ALG_PKMODE_COPY_NSZ_A2_B1 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_NSZ_A2_B2 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_NSZ_A2_B3 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_NSZ_A3_B0 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_B)
+#define OP_ALG_PKMODE_COPY_NSZ_A3_B1 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_NSZ_A3_B2 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_NSZ_A3_B3 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_NSZ_B0_A0 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_A)
+#define OP_ALG_PKMODE_COPY_NSZ_B0_A1 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_NSZ_B0_A2 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_NSZ_B0_A3 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_NSZ_B1_A0 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_A)
+#define OP_ALG_PKMODE_COPY_NSZ_B1_A1 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_NSZ_B1_A2 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_NSZ_B1_A3 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_NSZ_B2_A0 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_A)
+#define OP_ALG_PKMODE_COPY_NSZ_B2_A1 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_NSZ_B2_A2 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_NSZ_B2_A3 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_NSZ_B3_A0 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_A)
+#define OP_ALG_PKMODE_COPY_NSZ_B3_A1 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_NSZ_B3_A2 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_NSZ_B3_A3 (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_NSZ_A_B (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_B)
+#define OP_ALG_PKMODE_COPY_NSZ_A_E (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_E)
+#define OP_ALG_PKMODE_COPY_NSZ_A_N (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_N)
+#define OP_ALG_PKMODE_COPY_NSZ_B_A (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_A)
+#define OP_ALG_PKMODE_COPY_NSZ_B_E (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_E)
+#define OP_ALG_PKMODE_COPY_NSZ_B_N (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_N)
+#define OP_ALG_PKMODE_COPY_NSZ_N_A (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_N | \
+ OP_ALG_PKMODE_DST_REG_A)
+#define OP_ALG_PKMODE_COPY_NSZ_N_B (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_N | \
+ OP_ALG_PKMODE_DST_REG_B)
+#define OP_ALG_PKMODE_COPY_NSZ_N_E (OP_ALG_PKMODE_COPY_NSZ | \
+ OP_ALG_PKMODE_SRC_REG_N | \
+ OP_ALG_PKMODE_DST_REG_E)
+
+/* PKHA mode copy-memory functions - amount based on SRC SIZE */
+#define OP_ALG_PKMODE_COPY_SSZ 0x11
+#define OP_ALG_PKMODE_COPY_SSZ_A0_B0 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_B)
+#define OP_ALG_PKMODE_COPY_SSZ_A0_B1 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_SSZ_A0_B2 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_SSZ_A0_B3 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_SSZ_A1_B0 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_B)
+#define OP_ALG_PKMODE_COPY_SSZ_A1_B1 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_SSZ_A1_B2 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_SSZ_A1_B3 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_SSZ_A2_B0 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_B)
+#define OP_ALG_PKMODE_COPY_SSZ_A2_B1 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_SSZ_A2_B2 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_SSZ_A2_B3 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_SSZ_A3_B0 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_B)
+#define OP_ALG_PKMODE_COPY_SSZ_A3_B1 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_SSZ_A3_B2 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_SSZ_A3_B3 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_B | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_SSZ_B0_A0 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_A)
+#define OP_ALG_PKMODE_COPY_SSZ_B0_A1 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_SSZ_B0_A2 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_SSZ_B0_A3 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_SSZ_B1_A0 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_A)
+#define OP_ALG_PKMODE_COPY_SSZ_B1_A1 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_SSZ_B1_A2 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_SSZ_B1_A3 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_1 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_SSZ_B2_A0 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_A)
+#define OP_ALG_PKMODE_COPY_SSZ_B2_A1 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_SSZ_B2_A2 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_SSZ_B2_A3 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_2 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_SSZ_B3_A0 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_A)
+#define OP_ALG_PKMODE_COPY_SSZ_B3_A1 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_1)
+#define OP_ALG_PKMODE_COPY_SSZ_B3_A2 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_2)
+#define OP_ALG_PKMODE_COPY_SSZ_B3_A3 (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_SRC_SEG_3 | \
+ OP_ALG_PKMODE_DST_REG_A | \
+ OP_ALG_PKMODE_DST_SEG_3)
+
+#define OP_ALG_PKMODE_COPY_SSZ_A_B (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_B)
+#define OP_ALG_PKMODE_COPY_SSZ_A_E (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_E)
+#define OP_ALG_PKMODE_COPY_SSZ_A_N (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_A | \
+ OP_ALG_PKMODE_DST_REG_N)
+#define OP_ALG_PKMODE_COPY_SSZ_B_A (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_A)
+#define OP_ALG_PKMODE_COPY_SSZ_B_E (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_E)
+#define OP_ALG_PKMODE_COPY_SSZ_B_N (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_B | \
+ OP_ALG_PKMODE_DST_REG_N)
+#define OP_ALG_PKMODE_COPY_SSZ_N_A (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_N | \
+ OP_ALG_PKMODE_DST_REG_A)
+#define OP_ALG_PKMODE_COPY_SSZ_N_B (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_N | \
+ OP_ALG_PKMODE_DST_REG_B)
+#define OP_ALG_PKMODE_COPY_SSZ_N_E (OP_ALG_PKMODE_COPY_SSZ | \
+ OP_ALG_PKMODE_SRC_REG_N | \
+ OP_ALG_PKMODE_DST_REG_E)
+
+/*
+ * SEQ_IN_PTR Command Constructs
+ */
+
+/* Release Buffers */
+#define SQIN_RBS BIT(26)
+
+/* Sequence pointer is really a descriptor */
+#define SQIN_INL BIT(25)
+
+/* Sequence pointer is a scatter-gather table */
+#define SQIN_SGF BIT(24)
+
+/* Appends to a previous pointer */
+#define SQIN_PRE BIT(23)
+
+/* Use extended length following pointer */
+#define SQIN_EXT BIT(22)
+
+/* Restore sequence with pointer/length */
+#define SQIN_RTO BIT(21)
+
+/* Replace job descriptor */
+#define SQIN_RJD BIT(20)
+
+/* Sequence Out Pointer - start a new input sequence using output sequence */
+#define SQIN_SOP BIT(19)
+
+#define SQIN_LEN_SHIFT 0
+#define SQIN_LEN_MASK (0xffff << SQIN_LEN_SHIFT)
+
+/*
+ * SEQ_OUT_PTR Command Constructs
+ */
+
+/* Sequence pointer is a scatter-gather table */
+#define SQOUT_SGF BIT(24)
+
+/* Appends to a previous pointer */
+#define SQOUT_PRE BIT(23)
+
+/* Restore sequence with pointer/length */
+#define SQOUT_RTO BIT(21)
+
+/*
+ * Ignore length field, add current output frame length back to SOL register.
+ * Reset tracking length of bytes written to output frame.
+ * Must be used together with SQOUT_RTO.
+ */
+#define SQOUT_RST BIT(20)
+
+/* Allow "write safe" transactions for this Output Sequence */
+#define SQOUT_EWS BIT(19)
+
+/* Use extended length following pointer */
+#define SQOUT_EXT BIT(22)
+
+#define SQOUT_LEN_SHIFT 0
+#define SQOUT_LEN_MASK (0xffff << SQOUT_LEN_SHIFT)
+
+/*
+ * SIGNATURE Command Constructs
+ */
+
+/* TYPE field is all that's relevant */
+#define SIGN_TYPE_SHIFT 16
+#define SIGN_TYPE_MASK (0x0f << SIGN_TYPE_SHIFT)
+
+#define SIGN_TYPE_FINAL (0x00 << SIGN_TYPE_SHIFT)
+#define SIGN_TYPE_FINAL_RESTORE (0x01 << SIGN_TYPE_SHIFT)
+#define SIGN_TYPE_FINAL_NONZERO (0x02 << SIGN_TYPE_SHIFT)
+#define SIGN_TYPE_IMM_2 (0x0a << SIGN_TYPE_SHIFT)
+#define SIGN_TYPE_IMM_3 (0x0b << SIGN_TYPE_SHIFT)
+#define SIGN_TYPE_IMM_4 (0x0c << SIGN_TYPE_SHIFT)
+
+/*
+ * MOVE Command Constructs
+ */
+
+#define MOVE_AUX_SHIFT 25
+#define MOVE_AUX_MASK (3 << MOVE_AUX_SHIFT)
+#define MOVE_AUX_MS (2 << MOVE_AUX_SHIFT)
+#define MOVE_AUX_LS (1 << MOVE_AUX_SHIFT)
+
+#define MOVE_WAITCOMP_SHIFT 24
+#define MOVE_WAITCOMP_MASK (1 << MOVE_WAITCOMP_SHIFT)
+#define MOVE_WAITCOMP BIT(24)
+
+#define MOVE_SRC_SHIFT 20
+#define MOVE_SRC_MASK (0x0f << MOVE_SRC_SHIFT)
+#define MOVE_SRC_CLASS1CTX (0x00 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_CLASS2CTX (0x01 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_OUTFIFO (0x02 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_DESCBUF (0x03 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_MATH0 (0x04 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_MATH1 (0x05 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_MATH2 (0x06 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_MATH3 (0x07 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_INFIFO (0x08 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_INFIFO_CL (0x09 << MOVE_SRC_SHIFT)
+#define MOVE_SRC_INFIFO_NO_NFIFO (0x0a << MOVE_SRC_SHIFT)
+
+#define MOVE_DEST_SHIFT 16
+#define MOVE_DEST_MASK (0x0f << MOVE_DEST_SHIFT)
+#define MOVE_DEST_CLASS1CTX (0x00 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_CLASS2CTX (0x01 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_OUTFIFO (0x02 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_DESCBUF (0x03 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_MATH0 (0x04 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_MATH1 (0x05 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_MATH2 (0x06 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_MATH3 (0x07 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_CLASS1INFIFO (0x08 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_CLASS2INFIFO (0x09 << MOVE_DEST_SHIFT)
+#define MOVE_DEST_INFIFO (0x0a << MOVE_DEST_SHIFT)
+#define MOVE_DEST_PK_A (0x0c << MOVE_DEST_SHIFT)
+#define MOVE_DEST_CLASS1KEY (0x0d << MOVE_DEST_SHIFT)
+#define MOVE_DEST_CLASS2KEY (0x0e << MOVE_DEST_SHIFT)
+#define MOVE_DEST_ALTSOURCE (0x0f << MOVE_DEST_SHIFT)
+
+#define MOVE_OFFSET_SHIFT 8
+#define MOVE_OFFSET_MASK (0xff << MOVE_OFFSET_SHIFT)
+
+#define MOVE_LEN_SHIFT 0
+#define MOVE_LEN_MASK (0xff << MOVE_LEN_SHIFT)
+
+#define MOVELEN_MRSEL_SHIFT 0
+#define MOVELEN_MRSEL_MASK (0x3 << MOVE_LEN_SHIFT)
+#define MOVELEN_MRSEL_MATH0 (0 << MOVELEN_MRSEL_SHIFT)
+#define MOVELEN_MRSEL_MATH1 (1 << MOVELEN_MRSEL_SHIFT)
+#define MOVELEN_MRSEL_MATH2 (2 << MOVELEN_MRSEL_SHIFT)
+#define MOVELEN_MRSEL_MATH3 (3 << MOVELEN_MRSEL_SHIFT)
+
+#define MOVELEN_SIZE_SHIFT 6
+#define MOVELEN_SIZE_MASK (0x3 << MOVELEN_SIZE_SHIFT)
+#define MOVELEN_SIZE_WORD (0x01 << MOVELEN_SIZE_SHIFT)
+#define MOVELEN_SIZE_BYTE (0x02 << MOVELEN_SIZE_SHIFT)
+#define MOVELEN_SIZE_DWORD (0x03 << MOVELEN_SIZE_SHIFT)
+
+/*
+ * MATH Command Constructs
+ */
+
+#define MATH_IFB_SHIFT 26
+#define MATH_IFB_MASK (1 << MATH_IFB_SHIFT)
+#define MATH_IFB BIT(26)
+
+#define MATH_NFU_SHIFT 25
+#define MATH_NFU_MASK (1 << MATH_NFU_SHIFT)
+#define MATH_NFU BIT(25)
+
+/* STL for MATH, SSEL for MATHI */
+#define MATH_STL_SHIFT 24
+#define MATH_STL_MASK (1 << MATH_STL_SHIFT)
+#define MATH_STL BIT(24)
+
+#define MATH_SSEL_SHIFT 24
+#define MATH_SSEL_MASK (1 << MATH_SSEL_SHIFT)
+#define MATH_SSEL BIT(24)
+
+#define MATH_SWP_SHIFT 0
+#define MATH_SWP_MASK (1 << MATH_SWP_SHIFT)
+#define MATH_SWP BIT(0)
+
+/* Function selectors */
+#define MATH_FUN_SHIFT 20
+#define MATH_FUN_MASK (0x0f << MATH_FUN_SHIFT)
+#define MATH_FUN_ADD (0x00 << MATH_FUN_SHIFT)
+#define MATH_FUN_ADDC (0x01 << MATH_FUN_SHIFT)
+#define MATH_FUN_SUB (0x02 << MATH_FUN_SHIFT)
+#define MATH_FUN_SUBB (0x03 << MATH_FUN_SHIFT)
+#define MATH_FUN_OR (0x04 << MATH_FUN_SHIFT)
+#define MATH_FUN_AND (0x05 << MATH_FUN_SHIFT)
+#define MATH_FUN_XOR (0x06 << MATH_FUN_SHIFT)
+#define MATH_FUN_LSHIFT (0x07 << MATH_FUN_SHIFT)
+#define MATH_FUN_RSHIFT (0x08 << MATH_FUN_SHIFT)
+#define MATH_FUN_SHLD (0x09 << MATH_FUN_SHIFT)
+#define MATH_FUN_ZBYT (0x0a << MATH_FUN_SHIFT) /* ZBYT is for MATH */
+#define MATH_FUN_FBYT (0x0a << MATH_FUN_SHIFT) /* FBYT is for MATHI */
+#define MATH_FUN_BSWAP (0x0b << MATH_FUN_SHIFT)
+
+/* Source 0 selectors */
+#define MATH_SRC0_SHIFT 16
+#define MATH_SRC0_MASK (0x0f << MATH_SRC0_SHIFT)
+#define MATH_SRC0_REG0 (0x00 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_REG1 (0x01 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_REG2 (0x02 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_REG3 (0x03 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_IMM (0x04 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_DPOVRD (0x07 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_SEQINLEN (0x08 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_SEQOUTLEN (0x09 << MATH_SRC0_SHIFT)
+#define MATH_SRC0_VARSEQINLEN (0x0a << MATH_SRC0_SHIFT)
+#define MATH_SRC0_VARSEQOUTLEN (0x0b << MATH_SRC0_SHIFT)
+#define MATH_SRC0_ZERO (0x0c << MATH_SRC0_SHIFT)
+#define MATH_SRC0_ONE (0x0f << MATH_SRC0_SHIFT)
+
+/* Source 1 selectors */
+#define MATH_SRC1_SHIFT 12
+#define MATHI_SRC1_SHIFT 16
+#define MATH_SRC1_MASK (0x0f << MATH_SRC1_SHIFT)
+#define MATH_SRC1_REG0 (0x00 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_REG1 (0x01 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_REG2 (0x02 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_REG3 (0x03 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_IMM (0x04 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_DPOVRD (0x07 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_VARSEQINLEN (0x08 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_VARSEQOUTLEN (0x09 << MATH_SRC1_SHIFT)
+#define MATH_SRC1_INFIFO (0x0a << MATH_SRC1_SHIFT)
+#define MATH_SRC1_OUTFIFO (0x0b << MATH_SRC1_SHIFT)
+#define MATH_SRC1_ONE (0x0c << MATH_SRC1_SHIFT)
+#define MATH_SRC1_JOBSOURCE (0x0d << MATH_SRC1_SHIFT)
+#define MATH_SRC1_ZERO (0x0f << MATH_SRC1_SHIFT)
+
+/* Destination selectors */
+#define MATH_DEST_SHIFT 8
+#define MATHI_DEST_SHIFT 12
+#define MATH_DEST_MASK (0x0f << MATH_DEST_SHIFT)
+#define MATH_DEST_REG0 (0x00 << MATH_DEST_SHIFT)
+#define MATH_DEST_REG1 (0x01 << MATH_DEST_SHIFT)
+#define MATH_DEST_REG2 (0x02 << MATH_DEST_SHIFT)
+#define MATH_DEST_REG3 (0x03 << MATH_DEST_SHIFT)
+#define MATH_DEST_DPOVRD (0x07 << MATH_DEST_SHIFT)
+#define MATH_DEST_SEQINLEN (0x08 << MATH_DEST_SHIFT)
+#define MATH_DEST_SEQOUTLEN (0x09 << MATH_DEST_SHIFT)
+#define MATH_DEST_VARSEQINLEN (0x0a << MATH_DEST_SHIFT)
+#define MATH_DEST_VARSEQOUTLEN (0x0b << MATH_DEST_SHIFT)
+#define MATH_DEST_NONE (0x0f << MATH_DEST_SHIFT)
+
+/* MATHI Immediate value */
+#define MATHI_IMM_SHIFT 4
+#define MATHI_IMM_MASK (0xff << MATHI_IMM_SHIFT)
+
+/* Length selectors */
+#define MATH_LEN_SHIFT 0
+#define MATH_LEN_MASK (0x0f << MATH_LEN_SHIFT)
+#define MATH_LEN_1BYTE 0x01
+#define MATH_LEN_2BYTE 0x02
+#define MATH_LEN_4BYTE 0x04
+#define MATH_LEN_8BYTE 0x08
+
+/*
+ * JUMP Command Constructs
+ */
+
+#define JUMP_CLASS_SHIFT 25
+#define JUMP_CLASS_MASK (3 << JUMP_CLASS_SHIFT)
+#define JUMP_CLASS_NONE 0
+#define JUMP_CLASS_CLASS1 (1 << JUMP_CLASS_SHIFT)
+#define JUMP_CLASS_CLASS2 (2 << JUMP_CLASS_SHIFT)
+#define JUMP_CLASS_BOTH (3 << JUMP_CLASS_SHIFT)
+
+#define JUMP_JSL_SHIFT 24
+#define JUMP_JSL_MASK (1 << JUMP_JSL_SHIFT)
+#define JUMP_JSL BIT(24)
+
+#define JUMP_TYPE_SHIFT 20
+#define JUMP_TYPE_MASK (0x0f << JUMP_TYPE_SHIFT)
+#define JUMP_TYPE_LOCAL (0x00 << JUMP_TYPE_SHIFT)
+#define JUMP_TYPE_LOCAL_INC (0x01 << JUMP_TYPE_SHIFT)
+#define JUMP_TYPE_GOSUB (0x02 << JUMP_TYPE_SHIFT)
+#define JUMP_TYPE_LOCAL_DEC (0x03 << JUMP_TYPE_SHIFT)
+#define JUMP_TYPE_NONLOCAL (0x04 << JUMP_TYPE_SHIFT)
+#define JUMP_TYPE_RETURN (0x06 << JUMP_TYPE_SHIFT)
+#define JUMP_TYPE_HALT (0x08 << JUMP_TYPE_SHIFT)
+#define JUMP_TYPE_HALT_USER (0x0c << JUMP_TYPE_SHIFT)
+
+#define JUMP_TEST_SHIFT 16
+#define JUMP_TEST_MASK (0x03 << JUMP_TEST_SHIFT)
+#define JUMP_TEST_ALL (0x00 << JUMP_TEST_SHIFT)
+#define JUMP_TEST_INVALL (0x01 << JUMP_TEST_SHIFT)
+#define JUMP_TEST_ANY (0x02 << JUMP_TEST_SHIFT)
+#define JUMP_TEST_INVANY (0x03 << JUMP_TEST_SHIFT)
+
+/* Condition codes. JSL bit is factored in */
+#define JUMP_COND_SHIFT 8
+#define JUMP_COND_MASK ((0xff << JUMP_COND_SHIFT) | JUMP_JSL)
+#define JUMP_COND_PK_0 BIT(15)
+#define JUMP_COND_PK_GCD_1 BIT(14)
+#define JUMP_COND_PK_PRIME BIT(13)
+#define JUMP_COND_MATH_N BIT(11)
+#define JUMP_COND_MATH_Z BIT(10)
+#define JUMP_COND_MATH_C BIT(9)
+#define JUMP_COND_MATH_NV BIT(8)
+
+#define JUMP_COND_JQP (BIT(15) | JUMP_JSL)
+#define JUMP_COND_SHRD (BIT(14) | JUMP_JSL)
+#define JUMP_COND_SELF (BIT(13) | JUMP_JSL)
+#define JUMP_COND_CALM (BIT(12) | JUMP_JSL)
+#define JUMP_COND_NIP (BIT(11) | JUMP_JSL)
+#define JUMP_COND_NIFP (BIT(10) | JUMP_JSL)
+#define JUMP_COND_NOP (BIT(9) | JUMP_JSL)
+#define JUMP_COND_NCP (BIT(8) | JUMP_JSL)
+
+/* Source / destination selectors */
+#define JUMP_SRC_DST_SHIFT 12
+#define JUMP_SRC_DST_MASK (0x0f << JUMP_SRC_DST_SHIFT)
+#define JUMP_SRC_DST_MATH0 (0x00 << JUMP_SRC_DST_SHIFT)
+#define JUMP_SRC_DST_MATH1 (0x01 << JUMP_SRC_DST_SHIFT)
+#define JUMP_SRC_DST_MATH2 (0x02 << JUMP_SRC_DST_SHIFT)
+#define JUMP_SRC_DST_MATH3 (0x03 << JUMP_SRC_DST_SHIFT)
+#define JUMP_SRC_DST_DPOVRD (0x07 << JUMP_SRC_DST_SHIFT)
+#define JUMP_SRC_DST_SEQINLEN (0x08 << JUMP_SRC_DST_SHIFT)
+#define JUMP_SRC_DST_SEQOUTLEN (0x09 << JUMP_SRC_DST_SHIFT)
+#define JUMP_SRC_DST_VARSEQINLEN (0x0a << JUMP_SRC_DST_SHIFT)
+#define JUMP_SRC_DST_VARSEQOUTLEN (0x0b << JUMP_SRC_DST_SHIFT)
+
+#define JUMP_OFFSET_SHIFT 0
+#define JUMP_OFFSET_MASK (0xff << JUMP_OFFSET_SHIFT)
+
+/*
+ * NFIFO ENTRY
+ * Data Constructs
+ *
+ */
+#define NFIFOENTRY_DEST_SHIFT 30
+#define NFIFOENTRY_DEST_MASK ((uint32_t)(3 << NFIFOENTRY_DEST_SHIFT))
+#define NFIFOENTRY_DEST_DECO (0 << NFIFOENTRY_DEST_SHIFT)
+#define NFIFOENTRY_DEST_CLASS1 (1 << NFIFOENTRY_DEST_SHIFT)
+#define NFIFOENTRY_DEST_CLASS2 ((uint32_t)(2 << NFIFOENTRY_DEST_SHIFT))
+#define NFIFOENTRY_DEST_BOTH ((uint32_t)(3 << NFIFOENTRY_DEST_SHIFT))
+
+#define NFIFOENTRY_LC2_SHIFT 29
+#define NFIFOENTRY_LC2_MASK (1 << NFIFOENTRY_LC2_SHIFT)
+#define NFIFOENTRY_LC2 BIT(29)
+
+#define NFIFOENTRY_LC1_SHIFT 28
+#define NFIFOENTRY_LC1_MASK (1 << NFIFOENTRY_LC1_SHIFT)
+#define NFIFOENTRY_LC1 BIT(28)
+
+#define NFIFOENTRY_FC2_SHIFT 27
+#define NFIFOENTRY_FC2_MASK (1 << NFIFOENTRY_FC2_SHIFT)
+#define NFIFOENTRY_FC2 BIT(27)
+
+#define NFIFOENTRY_FC1_SHIFT 26
+#define NFIFOENTRY_FC1_MASK (1 << NFIFOENTRY_FC1_SHIFT)
+#define NFIFOENTRY_FC1 BIT(26)
+
+#define NFIFOENTRY_STYPE_SHIFT 24
+#define NFIFOENTRY_STYPE_MASK (3 << NFIFOENTRY_STYPE_SHIFT)
+#define NFIFOENTRY_STYPE_DFIFO (0 << NFIFOENTRY_STYPE_SHIFT)
+#define NFIFOENTRY_STYPE_OFIFO (1 << NFIFOENTRY_STYPE_SHIFT)
+#define NFIFOENTRY_STYPE_PAD (2 << NFIFOENTRY_STYPE_SHIFT)
+#define NFIFOENTRY_STYPE_SNOOP (3 << NFIFOENTRY_STYPE_SHIFT)
+#define NFIFOENTRY_STYPE_ALTSOURCE ((0 << NFIFOENTRY_STYPE_SHIFT) \
+ | NFIFOENTRY_AST)
+#define NFIFOENTRY_STYPE_OFIFO_SYNC ((1 << NFIFOENTRY_STYPE_SHIFT) \
+ | NFIFOENTRY_AST)
+#define NFIFOENTRY_STYPE_SNOOP_ALT ((3 << NFIFOENTRY_STYPE_SHIFT) \
+ | NFIFOENTRY_AST)
+
+#define NFIFOENTRY_DTYPE_SHIFT 20
+#define NFIFOENTRY_DTYPE_MASK (0xF << NFIFOENTRY_DTYPE_SHIFT)
+
+#define NFIFOENTRY_DTYPE_SBOX (0x0 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_AAD (0x1 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_IV (0x2 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_SAD (0x3 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_ICV (0xA << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_SKIP (0xE << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_MSG (0xF << NFIFOENTRY_DTYPE_SHIFT)
+
+#define NFIFOENTRY_DTYPE_PK_A0 (0x0 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_A1 (0x1 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_A2 (0x2 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_A3 (0x3 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_B0 (0x4 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_B1 (0x5 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_B2 (0x6 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_B3 (0x7 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_N (0x8 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_E (0x9 << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_A (0xC << NFIFOENTRY_DTYPE_SHIFT)
+#define NFIFOENTRY_DTYPE_PK_B (0xD << NFIFOENTRY_DTYPE_SHIFT)
+
+#define NFIFOENTRY_BND_SHIFT 19
+#define NFIFOENTRY_BND_MASK (1 << NFIFOENTRY_BND_SHIFT)
+#define NFIFOENTRY_BND BIT(19)
+
+#define NFIFOENTRY_PTYPE_SHIFT 16
+#define NFIFOENTRY_PTYPE_MASK (0x7 << NFIFOENTRY_PTYPE_SHIFT)
+
+#define NFIFOENTRY_PTYPE_ZEROS (0x0 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_RND_NOZEROS (0x1 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_INCREMENT (0x2 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_RND (0x3 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_ZEROS_NZ (0x4 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_RND_NZ_LZ (0x5 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_N (0x6 << NFIFOENTRY_PTYPE_SHIFT)
+#define NFIFOENTRY_PTYPE_RND_NZ_N (0x7 << NFIFOENTRY_PTYPE_SHIFT)
+
+#define NFIFOENTRY_OC_SHIFT 15
+#define NFIFOENTRY_OC_MASK (1 << NFIFOENTRY_OC_SHIFT)
+#define NFIFOENTRY_OC BIT(15)
+
+#define NFIFOENTRY_PR_SHIFT 15
+#define NFIFOENTRY_PR_MASK (1 << NFIFOENTRY_PR_SHIFT)
+#define NFIFOENTRY_PR BIT(15)
+
+#define NFIFOENTRY_AST_SHIFT 14
+#define NFIFOENTRY_AST_MASK (1 << NFIFOENTRY_AST_SHIFT)
+#define NFIFOENTRY_AST BIT(14)
+
+#define NFIFOENTRY_BM_SHIFT 11
+#define NFIFOENTRY_BM_MASK (1 << NFIFOENTRY_BM_SHIFT)
+#define NFIFOENTRY_BM BIT(11)
+
+#define NFIFOENTRY_PS_SHIFT 10
+#define NFIFOENTRY_PS_MASK (1 << NFIFOENTRY_PS_SHIFT)
+#define NFIFOENTRY_PS BIT(10)
+
+#define NFIFOENTRY_DLEN_SHIFT 0
+#define NFIFOENTRY_DLEN_MASK (0xFFF << NFIFOENTRY_DLEN_SHIFT)
+
+#define NFIFOENTRY_PLEN_SHIFT 0
+#define NFIFOENTRY_PLEN_MASK (0xFF << NFIFOENTRY_PLEN_SHIFT)
+
+/* Append Load Immediate Command */
+#define FD_CMD_APPEND_LOAD_IMMEDIATE BIT(31)
+
+/* Set SEQ LIODN equal to the Non-SEQ LIODN for the job */
+#define FD_CMD_SET_SEQ_LIODN_EQUAL_NONSEQ_LIODN BIT(30)
+
+/* Frame Descriptor Command for Replacement Job Descriptor */
+#define FD_CMD_REPLACE_JOB_DESC BIT(29)
+
+#endif /* __RTA_DESC_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/desc/algo.h b/drivers/crypto/dpaa2_sec/hw/desc/algo.h
new file mode 100644
index 00000000..c71ada07
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/desc/algo.h
@@ -0,0 +1,465 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DESC_ALGO_H__
+#define __DESC_ALGO_H__
+
+#include "hw/rta.h"
+#include "common.h"
+
+/**
+ * DOC: Algorithms - Shared Descriptor Constructors
+ *
+ * Shared descriptors for algorithms (i.e. not for protocols).
+ */
+
+/**
+ * cnstr_shdsc_snow_f8 - SNOW/f8 (UEA2) as a shared descriptor
+ * @descbuf: pointer to descriptor-under-construction buffer
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: must be true when core endianness doesn't match SEC endianness
+ * @cipherdata: pointer to block cipher transform definitions
+ * @dir: Cipher direction (DIR_ENC/DIR_DEC)
+ * @count: UEA2 count value (32 bits)
+ * @bearer: UEA2 bearer ID (5 bits)
+ * @direction: UEA2 direction (1 bit)
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_snow_f8(uint32_t *descbuf, bool ps, bool swap,
+ struct alginfo *cipherdata, uint8_t dir,
+ uint32_t count, uint8_t bearer, uint8_t direction)
+{
+ struct program prg;
+ struct program *p = &prg;
+ uint32_t ct = count;
+ uint8_t br = bearer;
+ uint8_t dr = direction;
+ uint32_t context[2] = {ct, (br << 27) | (dr << 26)};
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap) {
+ PROGRAM_SET_BSWAP(p);
+
+ context[0] = swab32(context[0]);
+ context[1] = swab32(context[1]);
+ }
+
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ SHR_HDR(p, SHR_ALWAYS, 1, 0);
+
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ MATHB(p, SEQINSZ, SUB, MATH2, VSEQINSZ, 4, 0);
+ MATHB(p, SEQINSZ, SUB, MATH2, VSEQOUTSZ, 4, 0);
+ ALG_OPERATION(p, OP_ALG_ALGSEL_SNOW_F8, OP_ALG_AAI_F8,
+ OP_ALG_AS_INITFINAL, 0, dir);
+ LOAD(p, (uintptr_t)context, CONTEXT1, 0, 8, IMMED | COPY);
+ SEQFIFOLOAD(p, MSG1, 0, VLF | LAST1);
+ SEQFIFOSTORE(p, MSG, 0, 0, VLF);
+
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * cnstr_shdsc_snow_f9 - SNOW/f9 (UIA2) as a shared descriptor
+ * @descbuf: pointer to descriptor-under-construction buffer
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: must be true when core endianness doesn't match SEC endianness
+ * @authdata: pointer to authentication transform definitions
+ * @dir: cipher direction (DIR_ENC/DIR_DEC)
+ * @count: UEA2 count value (32 bits)
+ * @fresh: UEA2 fresh value ID (32 bits)
+ * @direction: UEA2 direction (1 bit)
+ * @datalen: size of data
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_snow_f9(uint32_t *descbuf, bool ps, bool swap,
+ struct alginfo *authdata, uint8_t dir, uint32_t count,
+ uint32_t fresh, uint8_t direction, uint32_t datalen)
+{
+ struct program prg;
+ struct program *p = &prg;
+ uint64_t ct = count;
+ uint64_t fr = fresh;
+ uint64_t dr = direction;
+ uint64_t context[2];
+
+ context[0] = (ct << 32) | (dr << 26);
+ context[1] = fr << 32;
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap) {
+ PROGRAM_SET_BSWAP(p);
+
+ context[0] = swab64(context[0]);
+ context[1] = swab64(context[1]);
+ }
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ SHR_HDR(p, SHR_ALWAYS, 1, 0);
+
+ KEY(p, KEY2, authdata->key_enc_flags, authdata->key, authdata->keylen,
+ INLINE_KEY(authdata));
+ MATHB(p, SEQINSZ, SUB, MATH2, VSEQINSZ, 4, 0);
+ ALG_OPERATION(p, OP_ALG_ALGSEL_SNOW_F9, OP_ALG_AAI_F9,
+ OP_ALG_AS_INITFINAL, 0, dir);
+ LOAD(p, (uintptr_t)context, CONTEXT2, 0, 16, IMMED | COPY);
+ SEQFIFOLOAD(p, BIT_DATA, datalen, CLASS2 | LAST2);
+ /* Save lower half of MAC out into a 32-bit sequence */
+ SEQSTORE(p, CONTEXT2, 0, 4, 0);
+
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * cnstr_shdsc_blkcipher - block cipher transformation
+ * @descbuf: pointer to descriptor-under-construction buffer
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: must be true when core endianness doesn't match SEC endianness
+ * @cipherdata: pointer to block cipher transform definitions
+ * @iv: IV data; if NULL, "ivlen" bytes from the input frame will be read as IV
+ * @ivlen: IV length
+ * @dir: DIR_ENC/DIR_DEC
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_blkcipher(uint32_t *descbuf, bool ps, bool swap,
+ struct alginfo *cipherdata, uint8_t *iv,
+ uint32_t ivlen, uint8_t dir)
+{
+ struct program prg;
+ struct program *p = &prg;
+ const bool is_aes_dec = (dir == DIR_DEC) &&
+ (cipherdata->algtype == OP_ALG_ALGSEL_AES);
+ LABEL(keyjmp);
+ LABEL(skipdk);
+ REFERENCE(pkeyjmp);
+ REFERENCE(pskipdk);
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ SHR_HDR(p, SHR_SERIAL, 1, SC);
+
+ pkeyjmp = JUMP(p, keyjmp, LOCAL_JUMP, ALL_TRUE, SHRD);
+ /* Insert Key */
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+
+ if (is_aes_dec) {
+ ALG_OPERATION(p, cipherdata->algtype, cipherdata->algmode,
+ OP_ALG_AS_INITFINAL, ICV_CHECK_DISABLE, dir);
+
+ pskipdk = JUMP(p, skipdk, LOCAL_JUMP, ALL_TRUE, 0);
+ }
+ SET_LABEL(p, keyjmp);
+
+ if (is_aes_dec) {
+ ALG_OPERATION(p, OP_ALG_ALGSEL_AES, cipherdata->algmode |
+ OP_ALG_AAI_DK, OP_ALG_AS_INITFINAL,
+ ICV_CHECK_DISABLE, dir);
+ SET_LABEL(p, skipdk);
+ } else {
+ ALG_OPERATION(p, cipherdata->algtype, cipherdata->algmode,
+ OP_ALG_AS_INITFINAL, ICV_CHECK_DISABLE, dir);
+ }
+
+ if (iv)
+ /* IV load, convert size */
+ LOAD(p, (uintptr_t)iv, CONTEXT1, 0, ivlen, IMMED | COPY);
+ else
+ /* IV is present first before the actual message */
+ SEQLOAD(p, CONTEXT1, 0, ivlen, 0);
+
+ MATHB(p, SEQINSZ, SUB, MATH2, VSEQINSZ, 4, 0);
+ MATHB(p, SEQINSZ, SUB, MATH2, VSEQOUTSZ, 4, 0);
+
+ /* Insert sequence load/store with VLF */
+ SEQFIFOLOAD(p, MSG1, 0, VLF | LAST1);
+ SEQFIFOSTORE(p, MSG, 0, 0, VLF);
+
+ PATCH_JUMP(p, pkeyjmp, keyjmp);
+ if (is_aes_dec)
+ PATCH_JUMP(p, pskipdk, skipdk);
+
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * cnstr_shdsc_hmac - HMAC shared
+ * @descbuf: pointer to descriptor-under-construction buffer
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: must be true when core endianness doesn't match SEC endianness
+ * @authdata: pointer to authentication transform definitions;
+ * message digest algorithm: OP_ALG_ALGSEL_MD5/ SHA1-512.
+ * @do_icv: 0 if ICV checking is not desired, any other value if ICV checking
+ * is needed for all the packets processed by this shared descriptor
+ * @trunc_len: Length of the truncated ICV to be written in the output buffer, 0
+ * if no truncation is needed
+ *
+ * Note: There's no support for keys longer than the block size of the
+ * underlying hash function, according to the selected algorithm.
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_hmac(uint32_t *descbuf, bool ps, bool swap,
+ struct alginfo *authdata, uint8_t do_icv,
+ uint8_t trunc_len)
+{
+ struct program prg;
+ struct program *p = &prg;
+ uint8_t storelen, opicv, dir;
+ LABEL(keyjmp);
+ LABEL(jmpprecomp);
+ REFERENCE(pkeyjmp);
+ REFERENCE(pjmpprecomp);
+
+ /* Compute fixed-size store based on alg selection */
+ switch (authdata->algtype) {
+ case OP_ALG_ALGSEL_MD5:
+ storelen = 16;
+ break;
+ case OP_ALG_ALGSEL_SHA1:
+ storelen = 20;
+ break;
+ case OP_ALG_ALGSEL_SHA224:
+ storelen = 28;
+ break;
+ case OP_ALG_ALGSEL_SHA256:
+ storelen = 32;
+ break;
+ case OP_ALG_ALGSEL_SHA384:
+ storelen = 48;
+ break;
+ case OP_ALG_ALGSEL_SHA512:
+ storelen = 64;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ trunc_len = trunc_len && (trunc_len < storelen) ? trunc_len : storelen;
+
+ opicv = do_icv ? ICV_CHECK_ENABLE : ICV_CHECK_DISABLE;
+ dir = do_icv ? DIR_DEC : DIR_ENC;
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ SHR_HDR(p, SHR_SERIAL, 1, SC);
+
+ pkeyjmp = JUMP(p, keyjmp, LOCAL_JUMP, ALL_TRUE, SHRD);
+ KEY(p, KEY2, authdata->key_enc_flags, authdata->key, authdata->keylen,
+ INLINE_KEY(authdata));
+
+ /* Do operation */
+ ALG_OPERATION(p, authdata->algtype, OP_ALG_AAI_HMAC,
+ OP_ALG_AS_INITFINAL, opicv, dir);
+
+ pjmpprecomp = JUMP(p, jmpprecomp, LOCAL_JUMP, ALL_TRUE, 0);
+ SET_LABEL(p, keyjmp);
+
+ ALG_OPERATION(p, authdata->algtype, OP_ALG_AAI_HMAC_PRECOMP,
+ OP_ALG_AS_INITFINAL, opicv, dir);
+
+ SET_LABEL(p, jmpprecomp);
+
+ /* compute sequences */
+ if (opicv == ICV_CHECK_ENABLE)
+ MATHB(p, SEQINSZ, SUB, trunc_len, VSEQINSZ, 4, IMMED2);
+ else
+ MATHB(p, SEQINSZ, SUB, MATH2, VSEQINSZ, 4, 0);
+
+ /* Do load (variable length) */
+ SEQFIFOLOAD(p, MSG2, 0, VLF | LAST2);
+
+ if (opicv == ICV_CHECK_ENABLE)
+ SEQFIFOLOAD(p, ICV2, trunc_len, LAST2);
+ else
+ SEQSTORE(p, CONTEXT2, 0, trunc_len, 0);
+
+ PATCH_JUMP(p, pkeyjmp, keyjmp);
+ PATCH_JUMP(p, pjmpprecomp, jmpprecomp);
+
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * cnstr_shdsc_kasumi_f8 - KASUMI F8 (Confidentiality) as a shared descriptor
+ * (ETSI "Document 1: f8 and f9 specification")
+ * @descbuf: pointer to descriptor-under-construction buffer
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: must be true when core endianness doesn't match SEC endianness
+ * @cipherdata: pointer to block cipher transform definitions
+ * @dir: cipher direction (DIR_ENC/DIR_DEC)
+ * @count: count value (32 bits)
+ * @bearer: bearer ID (5 bits)
+ * @direction: direction (1 bit)
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_kasumi_f8(uint32_t *descbuf, bool ps, bool swap,
+ struct alginfo *cipherdata, uint8_t dir,
+ uint32_t count, uint8_t bearer, uint8_t direction)
+{
+ struct program prg;
+ struct program *p = &prg;
+ uint64_t ct = count;
+ uint64_t br = bearer;
+ uint64_t dr = direction;
+ uint32_t context[2] = { ct, (br << 27) | (dr << 26) };
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap) {
+ PROGRAM_SET_BSWAP(p);
+
+ context[0] = swab32(context[0]);
+ context[1] = swab32(context[1]);
+ }
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ SHR_HDR(p, SHR_ALWAYS, 1, 0);
+
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ MATHB(p, SEQINSZ, SUB, MATH2, VSEQINSZ, 4, 0);
+ MATHB(p, SEQINSZ, SUB, MATH2, VSEQOUTSZ, 4, 0);
+ ALG_OPERATION(p, OP_ALG_ALGSEL_KASUMI, OP_ALG_AAI_F8,
+ OP_ALG_AS_INITFINAL, 0, dir);
+ LOAD(p, (uintptr_t)context, CONTEXT1, 0, 8, IMMED | COPY);
+ SEQFIFOLOAD(p, MSG1, 0, VLF | LAST1);
+ SEQFIFOSTORE(p, MSG, 0, 0, VLF);
+
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * cnstr_shdsc_kasumi_f9 - KASUMI F9 (Integrity) as a shared descriptor
+ * (ETSI "Document 1: f8 and f9 specification")
+ * @descbuf: pointer to descriptor-under-construction buffer
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: must be true when core endianness doesn't match SEC endianness
+ * @authdata: pointer to authentication transform definitions
+ * @dir: cipher direction (DIR_ENC/DIR_DEC)
+ * @count: count value (32 bits)
+ * @fresh: fresh value ID (32 bits)
+ * @direction: direction (1 bit)
+ * @datalen: size of data
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_kasumi_f9(uint32_t *descbuf, bool ps, bool swap,
+ struct alginfo *authdata, uint8_t dir,
+ uint32_t count, uint32_t fresh, uint8_t direction,
+ uint32_t datalen)
+{
+ struct program prg;
+ struct program *p = &prg;
+ uint16_t ctx_offset = 16;
+ uint32_t context[6] = {count, direction << 26, fresh, 0, 0, 0};
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap) {
+ PROGRAM_SET_BSWAP(p);
+
+ context[0] = swab32(context[0]);
+ context[1] = swab32(context[1]);
+ context[2] = swab32(context[2]);
+ }
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ SHR_HDR(p, SHR_ALWAYS, 1, 0);
+
+ KEY(p, KEY1, authdata->key_enc_flags, authdata->key, authdata->keylen,
+ INLINE_KEY(authdata));
+ MATHB(p, SEQINSZ, SUB, MATH2, VSEQINSZ, 4, 0);
+ ALG_OPERATION(p, OP_ALG_ALGSEL_KASUMI, OP_ALG_AAI_F9,
+ OP_ALG_AS_INITFINAL, 0, dir);
+ LOAD(p, (uintptr_t)context, CONTEXT1, 0, 24, IMMED | COPY);
+ SEQFIFOLOAD(p, BIT_DATA, datalen, CLASS1 | LAST1);
+ /* Save output MAC of DWORD 2 into a 32-bit sequence */
+ SEQSTORE(p, CONTEXT1, ctx_offset, 4, 0);
+
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * cnstr_shdsc_crc - CRC32 Accelerator (IEEE 802 CRC32 protocol mode)
+ * @descbuf: pointer to descriptor-under-construction buffer
+ * @swap: must be true when core endianness doesn't match SEC endianness
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_crc(uint32_t *descbuf, bool swap)
+{
+ struct program prg;
+ struct program *p = &prg;
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+
+ SHR_HDR(p, SHR_ALWAYS, 1, 0);
+
+ MATHB(p, SEQINSZ, SUB, MATH2, VSEQINSZ, 4, 0);
+ ALG_OPERATION(p, OP_ALG_ALGSEL_CRC,
+ OP_ALG_AAI_802 | OP_ALG_AAI_DOC,
+ OP_ALG_AS_FINALIZE, 0, DIR_ENC);
+ SEQFIFOLOAD(p, MSG2, 0, VLF | LAST2);
+ SEQSTORE(p, CONTEXT2, 0, 4, 0);
+
+ return PROGRAM_FINALIZE(p);
+}
+
+#endif /* __DESC_ALGO_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/desc/common.h b/drivers/crypto/dpaa2_sec/hw/desc/common.h
new file mode 100644
index 00000000..6b254908
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/desc/common.h
@@ -0,0 +1,131 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DESC_COMMON_H__
+#define __DESC_COMMON_H__
+
+#include "hw/rta.h"
+
+/**
+ * DOC: Shared Descriptor Constructors - shared structures
+ *
+ * Data structures shared between algorithm, protocol implementations.
+ */
+
+/**
+ * struct alginfo - Container for algorithm details
+ * @algtype: algorithm selector; for valid values, see documentation of the
+ * functions where it is used.
+ * @keylen: length of the provided algorithm key, in bytes
+ * @key: address where algorithm key resides; virtual address if key_type is
+ * RTA_DATA_IMM, physical (bus) address if key_type is RTA_DATA_PTR or
+ * RTA_DATA_IMM_DMA.
+ * @key_enc_flags: key encryption flags; see encrypt_flags parameter of KEY
+ * command for valid values.
+ * @key_type: enum rta_data_type
+ * @algmode: algorithm mode selector; for valid values, see documentation of the
+ * functions where it is used.
+ */
+struct alginfo {
+ uint32_t algtype;
+ uint32_t keylen;
+ uint64_t key;
+ uint32_t key_enc_flags;
+ enum rta_data_type key_type;
+ uint16_t algmode;
+};
+
+#define INLINE_KEY(alginfo) inline_flags(alginfo->key_type)
+
+/**
+ * rta_inline_query() - Provide indications on which data items can be inlined
+ * and which shall be referenced in a shared descriptor.
+ * @sd_base_len: Shared descriptor base length - bytes consumed by the commands,
+ * excluding the data items to be inlined (or corresponding
+ * pointer if an item is not inlined). Each cnstr_* function that
+ * generates descriptors should have a define mentioning
+ * corresponding length.
+ * @jd_len: Maximum length of the job descriptor(s) that will be used
+ * together with the shared descriptor.
+ * @data_len: Array of lengths of the data items trying to be inlined
+ * @inl_mask: 32bit mask with bit x = 1 if data item x can be inlined, 0
+ * otherwise.
+ * @count: Number of data items (size of @data_len array); must be <= 32
+ *
+ * Return: 0 if data can be inlined / referenced, negative value if not. If 0,
+ * check @inl_mask for details.
+ */
+static inline int
+rta_inline_query(unsigned int sd_base_len,
+ unsigned int jd_len,
+ unsigned int *data_len,
+ uint32_t *inl_mask,
+ unsigned int count)
+{
+ int rem_bytes = (int)(CAAM_DESC_BYTES_MAX - sd_base_len - jd_len);
+ unsigned int i;
+
+ *inl_mask = 0;
+ for (i = 0; (i < count) && (rem_bytes > 0); i++) {
+ if (rem_bytes - (int)(data_len[i] +
+ (count - i - 1) * CAAM_PTR_SZ) >= 0) {
+ rem_bytes -= data_len[i];
+ *inl_mask |= (1 << i);
+ } else {
+ rem_bytes -= CAAM_PTR_SZ;
+ }
+ }
+
+ return (rem_bytes >= 0) ? 0 : -1;
+}
+
+/**
+ * struct protcmd - Container for Protocol Operation Command fields
+ * @optype: command type
+ * @protid: protocol Identifier
+ * @protinfo: protocol Information
+ */
+struct protcmd {
+ uint32_t optype;
+ uint32_t protid;
+ uint16_t protinfo;
+};
+
+#endif /* __DESC_COMMON_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/desc/ipsec.h b/drivers/crypto/dpaa2_sec/hw/desc/ipsec.h
new file mode 100644
index 00000000..c63d0dac
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/desc/ipsec.h
@@ -0,0 +1,1547 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __DESC_IPSEC_H__
+#define __DESC_IPSEC_H__
+
+#include "hw/rta.h"
+#include "common.h"
+
+/**
+ * DOC: IPsec Shared Descriptor Constructors
+ *
+ * Shared descriptors for IPsec protocol.
+ */
+
+/* General IPSec ESP encap / decap PDB options */
+
+/**
+ * PDBOPTS_ESP_ESN - Extended sequence included
+ */
+#define PDBOPTS_ESP_ESN 0x10
+
+/**
+ * PDBOPTS_ESP_IPVSN - Process IPv6 header
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_IPVSN 0x02
+
+/**
+ * PDBOPTS_ESP_TUNNEL - Tunnel mode next-header byte
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_TUNNEL 0x01
+
+/* IPSec ESP Encap PDB options */
+
+/**
+ * PDBOPTS_ESP_UPDATE_CSUM - Update ip header checksum
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_UPDATE_CSUM 0x80
+
+/**
+ * PDBOPTS_ESP_DIFFSERV - Copy TOS/TC from inner iphdr
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_DIFFSERV 0x40
+
+/**
+ * PDBOPTS_ESP_IVSRC - IV comes from internal random gen
+ */
+#define PDBOPTS_ESP_IVSRC 0x20
+
+/**
+ * PDBOPTS_ESP_IPHDRSRC - IP header comes from PDB
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_IPHDRSRC 0x08
+
+/**
+ * PDBOPTS_ESP_INCIPHDR - Prepend IP header to output frame
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_INCIPHDR 0x04
+
+/**
+ * PDBOPTS_ESP_OIHI_MASK - Mask for Outer IP Header Included
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_OIHI_MASK 0x0c
+
+/**
+ * PDBOPTS_ESP_OIHI_PDB_INL - Prepend IP header to output frame from PDB (where
+ * it is inlined).
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_OIHI_PDB_INL 0x0c
+
+/**
+ * PDBOPTS_ESP_OIHI_PDB_REF - Prepend IP header to output frame from PDB
+ * (referenced by pointer).
+ *
+ * Vlid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_OIHI_PDB_REF 0x08
+
+/**
+ * PDBOPTS_ESP_OIHI_IF - Prepend IP header to output frame from input frame
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_OIHI_IF 0x04
+
+/**
+ * PDBOPTS_ESP_NAT - Enable RFC 3948 UDP-encapsulated-ESP
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_NAT 0x02
+
+/**
+ * PDBOPTS_ESP_NUC - Enable NAT UDP Checksum
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_NUC 0x01
+
+/* IPSec ESP Decap PDB options */
+
+/**
+ * PDBOPTS_ESP_ARS_MASK - antireplay window mask
+ */
+#define PDBOPTS_ESP_ARS_MASK 0xc0
+
+/**
+ * PDBOPTS_ESP_ARSNONE - No antireplay window
+ */
+#define PDBOPTS_ESP_ARSNONE 0x00
+
+/**
+ * PDBOPTS_ESP_ARS64 - 64-entry antireplay window
+ */
+#define PDBOPTS_ESP_ARS64 0xc0
+
+/**
+ * PDBOPTS_ESP_ARS128 - 128-entry antireplay window
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_ARS128 0x80
+
+/**
+ * PDBOPTS_ESP_ARS32 - 32-entry antireplay window
+ */
+#define PDBOPTS_ESP_ARS32 0x40
+
+/**
+ * PDBOPTS_ESP_VERIFY_CSUM - Validate ip header checksum
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_VERIFY_CSUM 0x20
+
+/**
+ * PDBOPTS_ESP_TECN - Implement RRFC6040 ECN tunneling from outer header to
+ * inner header.
+ *
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_TECN 0x20
+
+/**
+ * PDBOPTS_ESP_OUTFMT - Output only decapsulation
+ *
+ * Valid only for IPsec legacy mode.
+ */
+#define PDBOPTS_ESP_OUTFMT 0x08
+
+/**
+ * PDBOPTS_ESP_AOFL - Adjust out frame len
+ *
+ * Valid only for IPsec legacy mode and for SEC >= 5.3.
+ */
+#define PDBOPTS_ESP_AOFL 0x04
+
+/**
+ * PDBOPTS_ESP_ETU - EtherType Update
+ *
+ * Add corresponding ethertype (0x0800 for IPv4, 0x86dd for IPv6) in the output
+ * frame.
+ * Valid only for IPsec new mode.
+ */
+#define PDBOPTS_ESP_ETU 0x01
+
+#define PDBHMO_ESP_DECAP_SHIFT 28
+#define PDBHMO_ESP_ENCAP_SHIFT 28
+#define PDBNH_ESP_ENCAP_SHIFT 16
+#define PDBNH_ESP_ENCAP_MASK (0xff << PDBNH_ESP_ENCAP_SHIFT)
+#define PDBHDRLEN_ESP_DECAP_SHIFT 16
+#define PDBHDRLEN_MASK (0x0fff << PDBHDRLEN_ESP_DECAP_SHIFT)
+#define PDB_NH_OFFSET_SHIFT 8
+#define PDB_NH_OFFSET_MASK (0xff << PDB_NH_OFFSET_SHIFT)
+
+/**
+ * PDBHMO_ESP_DECAP_DTTL - IPsec ESP decrement TTL (IPv4) / Hop limit (IPv6)
+ * HMO option.
+ */
+#define PDBHMO_ESP_DECAP_DTTL (0x02 << PDBHMO_ESP_DECAP_SHIFT)
+
+/**
+ * PDBHMO_ESP_ENCAP_DTTL - IPsec ESP increment TTL (IPv4) / Hop limit (IPv6)
+ * HMO option.
+ */
+#define PDBHMO_ESP_ENCAP_DTTL (0x02 << PDBHMO_ESP_ENCAP_SHIFT)
+
+/**
+ * PDBHMO_ESP_DIFFSERV - (Decap) DiffServ Copy - Copy the IPv4 TOS or IPv6
+ * Traffic Class byte from the outer IP header to the
+ * inner IP header.
+ */
+#define PDBHMO_ESP_DIFFSERV (0x01 << PDBHMO_ESP_DECAP_SHIFT)
+
+/**
+ * PDBHMO_ESP_SNR - (Encap) - Sequence Number Rollover control
+ *
+ * Configures behaviour in case of SN / ESN rollover:
+ * error if SNR = 1, rollover allowed if SNR = 0.
+ * Valid only for IPsec new mode.
+ */
+#define PDBHMO_ESP_SNR (0x01 << PDBHMO_ESP_ENCAP_SHIFT)
+
+/**
+ * PDBHMO_ESP_DFBIT - (Encap) Copy DF bit - if an IPv4 tunnel mode outer IP
+ * header is coming from the PDB, copy the DF bit from the
+ * inner IP header to the outer IP header.
+ */
+#define PDBHMO_ESP_DFBIT (0x04 << PDBHMO_ESP_ENCAP_SHIFT)
+
+/**
+ * PDBHMO_ESP_DFV - (Decap) - DF bit value
+ *
+ * If ODF = 1, DF bit in output frame is replaced by DFV.
+ * Valid only from SEC Era 5 onwards.
+ */
+#define PDBHMO_ESP_DFV (0x04 << PDBHMO_ESP_DECAP_SHIFT)
+
+/**
+ * PDBHMO_ESP_ODF - (Decap) Override DF bit in IPv4 header of decapsulated
+ * output frame.
+ *
+ * If ODF = 1, DF is replaced with the value of DFV bit.
+ * Valid only from SEC Era 5 onwards.
+ */
+#define PDBHMO_ESP_ODF (0x08 << PDBHMO_ESP_DECAP_SHIFT)
+
+/**
+ * struct ipsec_encap_cbc - PDB part for IPsec CBC encapsulation
+ * @iv: 16-byte array initialization vector
+ */
+struct ipsec_encap_cbc {
+ uint8_t iv[16];
+};
+
+
+/**
+ * struct ipsec_encap_ctr - PDB part for IPsec CTR encapsulation
+ * @ctr_nonce: 4-byte array nonce
+ * @ctr_initial: initial count constant
+ * @iv: initialization vector
+ */
+struct ipsec_encap_ctr {
+ uint8_t ctr_nonce[4];
+ uint32_t ctr_initial;
+ uint64_t iv;
+};
+
+/**
+ * struct ipsec_encap_ccm - PDB part for IPsec CCM encapsulation
+ * @salt: 3-byte array salt (lower 24 bits)
+ * @ccm_opt: CCM algorithm options - MSB-LSB description:
+ * b0_flags (8b) - CCM B0; use 0x5B for 8-byte ICV, 0x6B for 12-byte ICV,
+ * 0x7B for 16-byte ICV (cf. RFC4309, RFC3610)
+ * ctr_flags (8b) - counter flags; constant equal to 0x3
+ * ctr_initial (16b) - initial count constant
+ * @iv: initialization vector
+ */
+struct ipsec_encap_ccm {
+ uint8_t salt[4];
+ uint32_t ccm_opt;
+ uint64_t iv;
+};
+
+/**
+ * struct ipsec_encap_gcm - PDB part for IPsec GCM encapsulation
+ * @salt: 3-byte array salt (lower 24 bits)
+ * @rsvd: reserved, do not use
+ * @iv: initialization vector
+ */
+struct ipsec_encap_gcm {
+ uint8_t salt[4];
+ uint32_t rsvd;
+ uint64_t iv;
+};
+
+/**
+ * struct ipsec_encap_pdb - PDB for IPsec encapsulation
+ * @options: MSB-LSB description (both for legacy and new modes)
+ * hmo (header manipulation options) - 4b
+ * reserved - 4b
+ * next header (legacy) / reserved (new) - 8b
+ * next header offset (legacy) / AOIPHO (actual outer IP header offset) - 8b
+ * option flags (depend on selected algorithm) - 8b
+ * @seq_num_ext_hi: (optional) IPsec Extended Sequence Number (ESN)
+ * @seq_num: IPsec sequence number
+ * @spi: IPsec SPI (Security Parameters Index)
+ * @ip_hdr_len: optional IP Header length (in bytes)
+ * reserved - 16b
+ * Opt. IP Hdr Len - 16b
+ * @ip_hdr: optional IP Header content (only for IPsec legacy mode)
+ */
+struct ipsec_encap_pdb {
+ uint32_t options;
+ uint32_t seq_num_ext_hi;
+ uint32_t seq_num;
+ union {
+ struct ipsec_encap_cbc cbc;
+ struct ipsec_encap_ctr ctr;
+ struct ipsec_encap_ccm ccm;
+ struct ipsec_encap_gcm gcm;
+ };
+ uint32_t spi;
+ uint32_t ip_hdr_len;
+ uint8_t ip_hdr[0];
+};
+
+static inline unsigned int
+__rta_copy_ipsec_encap_pdb(struct program *program,
+ struct ipsec_encap_pdb *pdb,
+ uint32_t algtype)
+{
+ unsigned int start_pc = program->current_pc;
+
+ __rta_out32(program, pdb->options);
+ __rta_out32(program, pdb->seq_num_ext_hi);
+ __rta_out32(program, pdb->seq_num);
+
+ switch (algtype & OP_PCL_IPSEC_CIPHER_MASK) {
+ case OP_PCL_IPSEC_DES_IV64:
+ case OP_PCL_IPSEC_DES:
+ case OP_PCL_IPSEC_3DES:
+ case OP_PCL_IPSEC_AES_CBC:
+ case OP_PCL_IPSEC_NULL:
+ rta_copy_data(program, pdb->cbc.iv, sizeof(pdb->cbc.iv));
+ break;
+
+ case OP_PCL_IPSEC_AES_CTR:
+ rta_copy_data(program, pdb->ctr.ctr_nonce,
+ sizeof(pdb->ctr.ctr_nonce));
+ __rta_out32(program, pdb->ctr.ctr_initial);
+ __rta_out64(program, true, pdb->ctr.iv);
+ break;
+
+ case OP_PCL_IPSEC_AES_CCM8:
+ case OP_PCL_IPSEC_AES_CCM12:
+ case OP_PCL_IPSEC_AES_CCM16:
+ rta_copy_data(program, pdb->ccm.salt, sizeof(pdb->ccm.salt));
+ __rta_out32(program, pdb->ccm.ccm_opt);
+ __rta_out64(program, true, pdb->ccm.iv);
+ break;
+
+ case OP_PCL_IPSEC_AES_GCM8:
+ case OP_PCL_IPSEC_AES_GCM12:
+ case OP_PCL_IPSEC_AES_GCM16:
+ case OP_PCL_IPSEC_AES_NULL_WITH_GMAC:
+ rta_copy_data(program, pdb->gcm.salt, sizeof(pdb->gcm.salt));
+ __rta_out32(program, pdb->gcm.rsvd);
+ __rta_out64(program, true, pdb->gcm.iv);
+ break;
+ }
+
+ __rta_out32(program, pdb->spi);
+ __rta_out32(program, pdb->ip_hdr_len);
+
+ return start_pc;
+}
+
+/**
+ * struct ipsec_decap_cbc - PDB part for IPsec CBC decapsulation
+ * @rsvd: reserved, do not use
+ */
+struct ipsec_decap_cbc {
+ uint32_t rsvd[2];
+};
+
+/**
+ * struct ipsec_decap_ctr - PDB part for IPsec CTR decapsulation
+ * @ctr_nonce: 4-byte array nonce
+ * @ctr_initial: initial count constant
+ */
+struct ipsec_decap_ctr {
+ uint8_t ctr_nonce[4];
+ uint32_t ctr_initial;
+};
+
+/**
+ * struct ipsec_decap_ccm - PDB part for IPsec CCM decapsulation
+ * @salt: 3-byte salt (lower 24 bits)
+ * @ccm_opt: CCM algorithm options - MSB-LSB description:
+ * b0_flags (8b) - CCM B0; use 0x5B for 8-byte ICV, 0x6B for 12-byte ICV,
+ * 0x7B for 16-byte ICV (cf. RFC4309, RFC3610)
+ * ctr_flags (8b) - counter flags; constant equal to 0x3
+ * ctr_initial (16b) - initial count constant
+ */
+struct ipsec_decap_ccm {
+ uint8_t salt[4];
+ uint32_t ccm_opt;
+};
+
+/**
+ * struct ipsec_decap_gcm - PDB part for IPsec GCN decapsulation
+ * @salt: 4-byte salt
+ * @rsvd: reserved, do not use
+ */
+struct ipsec_decap_gcm {
+ uint8_t salt[4];
+ uint32_t rsvd;
+};
+
+/**
+ * struct ipsec_decap_pdb - PDB for IPsec decapsulation
+ * @options: MSB-LSB description (both for legacy and new modes)
+ * hmo (header manipulation options) - 4b
+ * IP header length - 12b
+ * next header offset (legacy) / AOIPHO (actual outer IP header offset) - 8b
+ * option flags (depend on selected algorithm) - 8b
+ * @seq_num_ext_hi: (optional) IPsec Extended Sequence Number (ESN)
+ * @seq_num: IPsec sequence number
+ * @anti_replay: Anti-replay window; size depends on ARS (option flags);
+ * format must be Big Endian, irrespective of platform
+ */
+struct ipsec_decap_pdb {
+ uint32_t options;
+ union {
+ struct ipsec_decap_cbc cbc;
+ struct ipsec_decap_ctr ctr;
+ struct ipsec_decap_ccm ccm;
+ struct ipsec_decap_gcm gcm;
+ };
+ uint32_t seq_num_ext_hi;
+ uint32_t seq_num;
+ uint32_t anti_replay[4];
+};
+
+static inline unsigned int
+__rta_copy_ipsec_decap_pdb(struct program *program,
+ struct ipsec_decap_pdb *pdb,
+ uint32_t algtype)
+{
+ unsigned int start_pc = program->current_pc;
+ unsigned int i, ars;
+
+ __rta_out32(program, pdb->options);
+
+ switch (algtype & OP_PCL_IPSEC_CIPHER_MASK) {
+ case OP_PCL_IPSEC_DES_IV64:
+ case OP_PCL_IPSEC_DES:
+ case OP_PCL_IPSEC_3DES:
+ case OP_PCL_IPSEC_AES_CBC:
+ case OP_PCL_IPSEC_NULL:
+ __rta_out32(program, pdb->cbc.rsvd[0]);
+ __rta_out32(program, pdb->cbc.rsvd[1]);
+ break;
+
+ case OP_PCL_IPSEC_AES_CTR:
+ rta_copy_data(program, pdb->ctr.ctr_nonce,
+ sizeof(pdb->ctr.ctr_nonce));
+ __rta_out32(program, pdb->ctr.ctr_initial);
+ break;
+
+ case OP_PCL_IPSEC_AES_CCM8:
+ case OP_PCL_IPSEC_AES_CCM12:
+ case OP_PCL_IPSEC_AES_CCM16:
+ rta_copy_data(program, pdb->ccm.salt, sizeof(pdb->ccm.salt));
+ __rta_out32(program, pdb->ccm.ccm_opt);
+ break;
+
+ case OP_PCL_IPSEC_AES_GCM8:
+ case OP_PCL_IPSEC_AES_GCM12:
+ case OP_PCL_IPSEC_AES_GCM16:
+ case OP_PCL_IPSEC_AES_NULL_WITH_GMAC:
+ rta_copy_data(program, pdb->gcm.salt, sizeof(pdb->gcm.salt));
+ __rta_out32(program, pdb->gcm.rsvd);
+ break;
+ }
+
+ __rta_out32(program, pdb->seq_num_ext_hi);
+ __rta_out32(program, pdb->seq_num);
+
+ switch (pdb->options & PDBOPTS_ESP_ARS_MASK) {
+ case PDBOPTS_ESP_ARS128:
+ ars = 4;
+ break;
+ case PDBOPTS_ESP_ARS64:
+ ars = 2;
+ break;
+ case PDBOPTS_ESP_ARS32:
+ ars = 1;
+ break;
+ case PDBOPTS_ESP_ARSNONE:
+ default:
+ ars = 0;
+ break;
+ }
+
+ for (i = 0; i < ars; i++)
+ __rta_out_be32(program, pdb->anti_replay[i]);
+
+ return start_pc;
+}
+
+/**
+ * enum ipsec_icv_size - Type selectors for icv size in IPsec protocol
+ * @IPSEC_ICV_MD5_SIZE: full-length MD5 ICV
+ * @IPSEC_ICV_MD5_TRUNC_SIZE: truncated MD5 ICV
+ */
+enum ipsec_icv_size {
+ IPSEC_ICV_MD5_SIZE = 16,
+ IPSEC_ICV_MD5_TRUNC_SIZE = 12
+};
+
+/*
+ * IPSec ESP Datapath Protocol Override Register (DPOVRD)
+ */
+
+#define IPSEC_DECO_DPOVRD_USE 0x80
+
+struct ipsec_deco_dpovrd {
+ uint8_t ovrd_ecn;
+ uint8_t ip_hdr_len;
+ uint8_t nh_offset;
+ union {
+ uint8_t next_header; /* next header if encap */
+ uint8_t rsvd; /* reserved if decap */
+ };
+};
+
+struct ipsec_new_encap_deco_dpovrd {
+#define IPSEC_NEW_ENCAP_DECO_DPOVRD_USE 0x8000
+ uint16_t ovrd_ip_hdr_len; /* OVRD + outer IP header material
+ * length
+ */
+#define IPSEC_NEW_ENCAP_OIMIF 0x80
+ uint8_t oimif_aoipho; /* OIMIF + actual outer IP header
+ * offset
+ */
+ uint8_t rsvd;
+};
+
+struct ipsec_new_decap_deco_dpovrd {
+ uint8_t ovrd;
+ uint8_t aoipho_hi; /* upper nibble of actual outer IP
+ * header
+ */
+ uint16_t aoipho_lo_ip_hdr_len; /* lower nibble of actual outer IP
+ * header + outer IP header material
+ */
+};
+
+static inline void
+__gen_auth_key(struct program *program, struct alginfo *authdata)
+{
+ uint32_t dkp_protid;
+
+ switch (authdata->algtype & OP_PCL_IPSEC_AUTH_MASK) {
+ case OP_PCL_IPSEC_HMAC_MD5_96:
+ case OP_PCL_IPSEC_HMAC_MD5_128:
+ dkp_protid = OP_PCLID_DKP_MD5;
+ break;
+ case OP_PCL_IPSEC_HMAC_SHA1_96:
+ case OP_PCL_IPSEC_HMAC_SHA1_160:
+ dkp_protid = OP_PCLID_DKP_SHA1;
+ break;
+ case OP_PCL_IPSEC_HMAC_SHA2_256_128:
+ dkp_protid = OP_PCLID_DKP_SHA256;
+ break;
+ case OP_PCL_IPSEC_HMAC_SHA2_384_192:
+ dkp_protid = OP_PCLID_DKP_SHA384;
+ break;
+ case OP_PCL_IPSEC_HMAC_SHA2_512_256:
+ dkp_protid = OP_PCLID_DKP_SHA512;
+ break;
+ default:
+ KEY(program, KEY2, authdata->key_enc_flags, authdata->key,
+ authdata->keylen, INLINE_KEY(authdata));
+ return;
+ }
+
+ if (authdata->key_type == RTA_DATA_PTR)
+ DKP_PROTOCOL(program, dkp_protid, OP_PCL_DKP_SRC_PTR,
+ OP_PCL_DKP_DST_PTR, (uint16_t)authdata->keylen,
+ authdata->key, authdata->key_type);
+ else
+ DKP_PROTOCOL(program, dkp_protid, OP_PCL_DKP_SRC_IMM,
+ OP_PCL_DKP_DST_IMM, (uint16_t)authdata->keylen,
+ authdata->key, authdata->key_type);
+}
+
+/**
+ * cnstr_shdsc_ipsec_encap - IPSec ESP encapsulation protocol-level shared
+ * descriptor.
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: if true, perform descriptor byte swapping on a 4-byte boundary
+ * @pdb: pointer to the PDB to be used with this descriptor
+ * This structure will be copied inline to the descriptor under
+ * construction. No error checking will be made. Refer to the
+ * block guide for a details of the encapsulation PDB.
+ * @cipherdata: pointer to block cipher transform definitions
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ * @authdata: pointer to authentication transform definitions
+ * If an authentication key is required by the protocol:
+ * -For SEC Eras 1-5, an MDHA split key must be provided;
+ * Note that the size of the split key itself must be specified.
+ * -For SEC Eras 6+, a "normal" key must be provided; DKP (Derived
+ * Key Protocol) will be used to compute MDHA on the fly in HW.
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_ipsec_encap(uint32_t *descbuf, bool ps, bool swap,
+ struct ipsec_encap_pdb *pdb,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata)
+{
+ struct program prg;
+ struct program *p = &prg;
+
+ LABEL(keyjmp);
+ REFERENCE(pkeyjmp);
+ LABEL(hdr);
+ REFERENCE(phdr);
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ phdr = SHR_HDR(p, SHR_SERIAL, hdr, 0);
+ __rta_copy_ipsec_encap_pdb(p, pdb, cipherdata->algtype);
+ COPY_DATA(p, pdb->ip_hdr, pdb->ip_hdr_len);
+ SET_LABEL(p, hdr);
+ pkeyjmp = JUMP(p, keyjmp, LOCAL_JUMP, ALL_TRUE, BOTH|SHRD);
+ if (authdata->keylen) {
+ if (rta_sec_era < RTA_SEC_ERA_6)
+ KEY(p, MDHA_SPLIT_KEY, authdata->key_enc_flags,
+ authdata->key, authdata->keylen,
+ INLINE_KEY(authdata));
+ else
+ __gen_auth_key(p, authdata);
+ }
+ if (cipherdata->keylen)
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ SET_LABEL(p, keyjmp);
+ PROTOCOL(p, OP_TYPE_ENCAP_PROTOCOL,
+ OP_PCLID_IPSEC,
+ (uint16_t)(cipherdata->algtype | authdata->algtype));
+ PATCH_JUMP(p, pkeyjmp, keyjmp);
+ PATCH_HDR(p, phdr, hdr);
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * cnstr_shdsc_ipsec_decap - IPSec ESP decapsulation protocol-level shared
+ * descriptor.
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: if true, perform descriptor byte swapping on a 4-byte boundary
+ * @pdb: pointer to the PDB to be used with this descriptor
+ * This structure will be copied inline to the descriptor under
+ * construction. No error checking will be made. Refer to the
+ * block guide for details about the decapsulation PDB.
+ * @cipherdata: pointer to block cipher transform definitions.
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ * @authdata: pointer to authentication transform definitions
+ * If an authentication key is required by the protocol:
+ * -For SEC Eras 1-5, an MDHA split key must be provided;
+ * Note that the size of the split key itself must be specified.
+ * -For SEC Eras 6+, a "normal" key must be provided; DKP (Derived
+ * Key Protocol) will be used to compute MDHA on the fly in HW.
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_ipsec_decap(uint32_t *descbuf, bool ps, bool swap,
+ struct ipsec_decap_pdb *pdb,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata)
+{
+ struct program prg;
+ struct program *p = &prg;
+
+ LABEL(keyjmp);
+ REFERENCE(pkeyjmp);
+ LABEL(hdr);
+ REFERENCE(phdr);
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ phdr = SHR_HDR(p, SHR_SERIAL, hdr, 0);
+ __rta_copy_ipsec_decap_pdb(p, pdb, cipherdata->algtype);
+ SET_LABEL(p, hdr);
+ pkeyjmp = JUMP(p, keyjmp, LOCAL_JUMP, ALL_TRUE, BOTH|SHRD);
+ if (authdata->keylen) {
+ if (rta_sec_era < RTA_SEC_ERA_6)
+ KEY(p, MDHA_SPLIT_KEY, authdata->key_enc_flags,
+ authdata->key, authdata->keylen,
+ INLINE_KEY(authdata));
+ else
+ __gen_auth_key(p, authdata);
+ }
+ if (cipherdata->keylen)
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ SET_LABEL(p, keyjmp);
+ PROTOCOL(p, OP_TYPE_DECAP_PROTOCOL,
+ OP_PCLID_IPSEC,
+ (uint16_t)(cipherdata->algtype | authdata->algtype));
+ PATCH_JUMP(p, pkeyjmp, keyjmp);
+ PATCH_HDR(p, phdr, hdr);
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * cnstr_shdsc_ipsec_encap_des_aes_xcbc - IPSec DES-CBC/3DES-CBC and
+ * AES-XCBC-MAC-96 ESP encapsulation shared descriptor.
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @pdb: pointer to the PDB to be used with this descriptor
+ * This structure will be copied inline to the descriptor under
+ * construction. No error checking will be made. Refer to the
+ * block guide for a details of the encapsulation PDB.
+ * @cipherdata: pointer to block cipher transform definitions
+ * Valid algorithm values - OP_PCL_IPSEC_DES, OP_PCL_IPSEC_3DES.
+ * @authdata: pointer to authentication transform definitions
+ * Valid algorithm value: OP_PCL_IPSEC_AES_XCBC_MAC_96.
+ *
+ * Supported only for platforms with 32-bit address pointers and SEC ERA 4 or
+ * higher. The tunnel/transport mode of the IPsec ESP is supported only if the
+ * Outer/Transport IP Header is present in the encapsulation output packet.
+ * The descriptor performs DES-CBC/3DES-CBC & HMAC-MD5-96 and then rereads
+ * the input packet to do the AES-XCBC-MAC-96 calculation and to overwrite
+ * the MD5 ICV.
+ * The descriptor uses all the benefits of the built-in protocol by computing
+ * the IPsec ESP with a hardware supported algorithms combination
+ * (DES-CBC/3DES-CBC & HMAC-MD5-96). The HMAC-MD5 authentication algorithm
+ * was chosen in order to speed up the computational time for this intermediate
+ * step.
+ * Warning: The user must allocate at least 32 bytes for the authentication key
+ * (in order to use it also with HMAC-MD5-96),even when using a shorter key
+ * for the AES-XCBC-MAC-96.
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_ipsec_encap_des_aes_xcbc(uint32_t *descbuf,
+ struct ipsec_encap_pdb *pdb,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata)
+{
+ struct program prg;
+ struct program *p = &prg;
+
+ LABEL(hdr);
+ LABEL(shd_ptr);
+ LABEL(keyjump);
+ LABEL(outptr);
+ LABEL(swapped_seqin_fields);
+ LABEL(swapped_seqin_ptr);
+ REFERENCE(phdr);
+ REFERENCE(pkeyjump);
+ REFERENCE(move_outlen);
+ REFERENCE(move_seqout_ptr);
+ REFERENCE(swapped_seqin_ptr_jump);
+ REFERENCE(write_swapped_seqin_ptr);
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ phdr = SHR_HDR(p, SHR_SERIAL, hdr, 0);
+ __rta_copy_ipsec_encap_pdb(p, pdb, cipherdata->algtype);
+ COPY_DATA(p, pdb->ip_hdr, pdb->ip_hdr_len);
+ SET_LABEL(p, hdr);
+ pkeyjump = JUMP(p, keyjump, LOCAL_JUMP, ALL_TRUE, SHRD | SELF);
+ /*
+ * Hard-coded KEY arguments. The descriptor uses all the benefits of
+ * the built-in protocol by computing the IPsec ESP with a hardware
+ * supported algorithms combination (DES-CBC/3DES-CBC & HMAC-MD5-96).
+ * The HMAC-MD5 authentication algorithm was chosen with
+ * the keys options from below in order to speed up the computational
+ * time for this intermediate step.
+ * Warning: The user must allocate at least 32 bytes for
+ * the authentication key (in order to use it also with HMAC-MD5-96),
+ * even when using a shorter key for the AES-XCBC-MAC-96.
+ */
+ KEY(p, MDHA_SPLIT_KEY, 0, authdata->key, 32, INLINE_KEY(authdata));
+ SET_LABEL(p, keyjump);
+ LOAD(p, LDST_SRCDST_WORD_CLRW | CLRW_CLR_C1MODE | CLRW_CLR_C1DATAS |
+ CLRW_CLR_C1CTX | CLRW_CLR_C1KEY | CLRW_RESET_CLS1_CHA, CLRW, 0, 4,
+ IMMED);
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ PROTOCOL(p, OP_TYPE_ENCAP_PROTOCOL, OP_PCLID_IPSEC,
+ (uint16_t)(cipherdata->algtype | OP_PCL_IPSEC_HMAC_MD5_96));
+ /* Swap SEQINPTR to SEQOUTPTR. */
+ move_seqout_ptr = MOVE(p, DESCBUF, 0, MATH1, 0, 16, WAITCOMP | IMMED);
+ MATHB(p, MATH1, AND, ~(CMD_SEQ_IN_PTR ^ CMD_SEQ_OUT_PTR), MATH1,
+ 8, IFB | IMMED2);
+/*
+ * TODO: RTA currently doesn't support creating a LOAD command
+ * with another command as IMM.
+ * To be changed when proper support is added in RTA.
+ */
+ LOAD(p, 0xa00000e5, MATH3, 4, 4, IMMED);
+ MATHB(p, MATH3, SHLD, MATH3, MATH3, 8, 0);
+ write_swapped_seqin_ptr = MOVE(p, MATH1, 0, DESCBUF, 0, 20, WAITCOMP |
+ IMMED);
+ swapped_seqin_ptr_jump = JUMP(p, swapped_seqin_ptr, LOCAL_JUMP,
+ ALL_TRUE, 0);
+ LOAD(p, LDST_SRCDST_WORD_CLRW | CLRW_CLR_C1MODE | CLRW_CLR_C1DATAS |
+ CLRW_CLR_C1CTX | CLRW_CLR_C1KEY | CLRW_RESET_CLS1_CHA, CLRW, 0, 4,
+ 0);
+ SEQOUTPTR(p, 0, 65535, RTO);
+ move_outlen = MOVE(p, DESCBUF, 0, MATH0, 4, 8, WAITCOMP | IMMED);
+ MATHB(p, MATH0, SUB,
+ (uint64_t)(pdb->ip_hdr_len + IPSEC_ICV_MD5_TRUNC_SIZE),
+ VSEQINSZ, 4, IMMED2);
+ MATHB(p, MATH0, SUB, IPSEC_ICV_MD5_TRUNC_SIZE, VSEQOUTSZ, 4, IMMED2);
+ KEY(p, KEY1, authdata->key_enc_flags, authdata->key, authdata->keylen,
+ 0);
+ ALG_OPERATION(p, OP_ALG_ALGSEL_AES, OP_ALG_AAI_XCBC_MAC,
+ OP_ALG_AS_INITFINAL, ICV_CHECK_DISABLE, DIR_ENC);
+ SEQFIFOLOAD(p, SKIP, pdb->ip_hdr_len, 0);
+ SEQFIFOLOAD(p, MSG1, 0, VLF | FLUSH1 | LAST1);
+ SEQFIFOSTORE(p, SKIP, 0, 0, VLF);
+ SEQSTORE(p, CONTEXT1, 0, IPSEC_ICV_MD5_TRUNC_SIZE, 0);
+/*
+ * TODO: RTA currently doesn't support adding labels in or after Job Descriptor.
+ * To be changed when proper support is added in RTA.
+ */
+ /* Label the Shared Descriptor Pointer */
+ SET_LABEL(p, shd_ptr);
+ shd_ptr += 1;
+ /* Label the Output Pointer */
+ SET_LABEL(p, outptr);
+ outptr += 3;
+ /* Label the first word after JD */
+ SET_LABEL(p, swapped_seqin_fields);
+ swapped_seqin_fields += 8;
+ /* Label the second word after JD */
+ SET_LABEL(p, swapped_seqin_ptr);
+ swapped_seqin_ptr += 9;
+
+ PATCH_HDR(p, phdr, hdr);
+ PATCH_JUMP(p, pkeyjump, keyjump);
+ PATCH_JUMP(p, swapped_seqin_ptr_jump, swapped_seqin_ptr);
+ PATCH_MOVE(p, move_outlen, outptr);
+ PATCH_MOVE(p, move_seqout_ptr, shd_ptr);
+ PATCH_MOVE(p, write_swapped_seqin_ptr, swapped_seqin_fields);
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * cnstr_shdsc_ipsec_decap_des_aes_xcbc - IPSec DES-CBC/3DES-CBC and
+ * AES-XCBC-MAC-96 ESP decapsulation shared descriptor.
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @pdb: pointer to the PDB to be used with this descriptor
+ * This structure will be copied inline to the descriptor under
+ * construction. No error checking will be made. Refer to the
+ * block guide for a details of the encapsulation PDB.
+ * @cipherdata: pointer to block cipher transform definitions
+ * Valid algorithm values - OP_PCL_IPSEC_DES, OP_PCL_IPSEC_3DES.
+ * @authdata: pointer to authentication transform definitions
+ * Valid algorithm value: OP_PCL_IPSEC_AES_XCBC_MAC_96.
+ *
+ * Supported only for platforms with 32-bit address pointers and SEC ERA 4 or
+ * higher. The tunnel/transport mode of the IPsec ESP is supported only if the
+ * Outer/Transport IP Header is present in the decapsulation input packet.
+ * The descriptor computes the AES-XCBC-MAC-96 to check if the received ICV
+ * is correct, rereads the input packet to compute the MD5 ICV, overwrites
+ * the XCBC ICV, and then sends the modified input packet to the
+ * DES-CBC/3DES-CBC & HMAC-MD5-96 IPsec.
+ * The descriptor uses all the benefits of the built-in protocol by computing
+ * the IPsec ESP with a hardware supported algorithms combination
+ * (DES-CBC/3DES-CBC & HMAC-MD5-96). The HMAC-MD5 authentication algorithm
+ * was chosen in order to speed up the computational time for this intermediate
+ * step.
+ * Warning: The user must allocate at least 32 bytes for the authentication key
+ * (in order to use it also with HMAC-MD5-96),even when using a shorter key
+ * for the AES-XCBC-MAC-96.
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_ipsec_decap_des_aes_xcbc(uint32_t *descbuf,
+ struct ipsec_decap_pdb *pdb,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata)
+{
+ struct program prg;
+ struct program *p = &prg;
+ uint32_t ip_hdr_len = (pdb->options & PDBHDRLEN_MASK) >>
+ PDBHDRLEN_ESP_DECAP_SHIFT;
+
+ LABEL(hdr);
+ LABEL(jump_cmd);
+ LABEL(keyjump);
+ LABEL(outlen);
+ LABEL(seqin_ptr);
+ LABEL(seqout_ptr);
+ LABEL(swapped_seqout_fields);
+ LABEL(swapped_seqout_ptr);
+ REFERENCE(seqout_ptr_jump);
+ REFERENCE(phdr);
+ REFERENCE(pkeyjump);
+ REFERENCE(move_jump);
+ REFERENCE(move_jump_back);
+ REFERENCE(move_seqin_ptr);
+ REFERENCE(swapped_seqout_ptr_jump);
+ REFERENCE(write_swapped_seqout_ptr);
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ phdr = SHR_HDR(p, SHR_SERIAL, hdr, 0);
+ __rta_copy_ipsec_decap_pdb(p, pdb, cipherdata->algtype);
+ SET_LABEL(p, hdr);
+ pkeyjump = JUMP(p, keyjump, LOCAL_JUMP, ALL_TRUE, SHRD | SELF);
+ /*
+ * Hard-coded KEY arguments. The descriptor uses all the benefits of
+ * the built-in protocol by computing the IPsec ESP with a hardware
+ * supported algorithms combination (DES-CBC/3DES-CBC & HMAC-MD5-96).
+ * The HMAC-MD5 authentication algorithm was chosen with
+ * the keys options from bellow in order to speed up the computational
+ * time for this intermediate step.
+ * Warning: The user must allocate at least 32 bytes for
+ * the authentication key (in order to use it also with HMAC-MD5-96),
+ * even when using a shorter key for the AES-XCBC-MAC-96.
+ */
+ KEY(p, MDHA_SPLIT_KEY, 0, authdata->key, 32, INLINE_KEY(authdata));
+ SET_LABEL(p, keyjump);
+ LOAD(p, LDST_SRCDST_WORD_CLRW | CLRW_CLR_C1MODE | CLRW_CLR_C1DATAS |
+ CLRW_CLR_C1CTX | CLRW_CLR_C1KEY | CLRW_RESET_CLS1_CHA, CLRW, 0, 4,
+ 0);
+ KEY(p, KEY1, authdata->key_enc_flags, authdata->key, authdata->keylen,
+ INLINE_KEY(authdata));
+ MATHB(p, SEQINSZ, SUB,
+ (uint64_t)(ip_hdr_len + IPSEC_ICV_MD5_TRUNC_SIZE), MATH0, 4,
+ IMMED2);
+ MATHB(p, MATH0, SUB, ZERO, VSEQINSZ, 4, 0);
+ ALG_OPERATION(p, OP_ALG_ALGSEL_MD5, OP_ALG_AAI_HMAC_PRECOMP,
+ OP_ALG_AS_INITFINAL, ICV_CHECK_DISABLE, DIR_ENC);
+ ALG_OPERATION(p, OP_ALG_ALGSEL_AES, OP_ALG_AAI_XCBC_MAC,
+ OP_ALG_AS_INITFINAL, ICV_CHECK_ENABLE, DIR_DEC);
+ SEQFIFOLOAD(p, SKIP, ip_hdr_len, 0);
+ SEQFIFOLOAD(p, MSG1, 0, VLF | FLUSH1);
+ SEQFIFOLOAD(p, ICV1, IPSEC_ICV_MD5_TRUNC_SIZE, FLUSH1 | LAST1);
+ /* Swap SEQOUTPTR to SEQINPTR. */
+ move_seqin_ptr = MOVE(p, DESCBUF, 0, MATH1, 0, 16, WAITCOMP | IMMED);
+ MATHB(p, MATH1, OR, CMD_SEQ_IN_PTR ^ CMD_SEQ_OUT_PTR, MATH1, 8,
+ IFB | IMMED2);
+/*
+ * TODO: RTA currently doesn't support creating a LOAD command
+ * with another command as IMM.
+ * To be changed when proper support is added in RTA.
+ */
+ LOAD(p, 0xA00000e1, MATH3, 4, 4, IMMED);
+ MATHB(p, MATH3, SHLD, MATH3, MATH3, 8, 0);
+ write_swapped_seqout_ptr = MOVE(p, MATH1, 0, DESCBUF, 0, 20, WAITCOMP |
+ IMMED);
+ swapped_seqout_ptr_jump = JUMP(p, swapped_seqout_ptr, LOCAL_JUMP,
+ ALL_TRUE, 0);
+/*
+ * TODO: To be changed when proper support is added in RTA (can't load
+ * a command that is also written by RTA).
+ * Change when proper RTA support is added.
+ */
+ SET_LABEL(p, jump_cmd);
+ WORD(p, 0xA00000f3);
+ SEQINPTR(p, 0, 65535, RTO);
+ MATHB(p, MATH0, SUB, ZERO, VSEQINSZ, 4, 0);
+ MATHB(p, MATH0, ADD, ip_hdr_len, VSEQOUTSZ, 4, IMMED2);
+ move_jump = MOVE(p, DESCBUF, 0, OFIFO, 0, 8, WAITCOMP | IMMED);
+ move_jump_back = MOVE(p, OFIFO, 0, DESCBUF, 0, 8, IMMED);
+ SEQFIFOLOAD(p, SKIP, ip_hdr_len, 0);
+ SEQFIFOLOAD(p, MSG2, 0, VLF | LAST2);
+ SEQFIFOSTORE(p, SKIP, 0, 0, VLF);
+ SEQSTORE(p, CONTEXT2, 0, IPSEC_ICV_MD5_TRUNC_SIZE, 0);
+ seqout_ptr_jump = JUMP(p, seqout_ptr, LOCAL_JUMP, ALL_TRUE, CALM);
+
+ LOAD(p, LDST_SRCDST_WORD_CLRW | CLRW_CLR_C1MODE | CLRW_CLR_C1DATAS |
+ CLRW_CLR_C1CTX | CLRW_CLR_C1KEY | CLRW_CLR_C2MODE |
+ CLRW_CLR_C2DATAS | CLRW_CLR_C2CTX | CLRW_RESET_CLS1_CHA, CLRW, 0,
+ 4, 0);
+ SEQINPTR(p, 0, 65535, RTO);
+ MATHB(p, MATH0, ADD,
+ (uint64_t)(ip_hdr_len + IPSEC_ICV_MD5_TRUNC_SIZE), SEQINSZ, 4,
+ IMMED2);
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ PROTOCOL(p, OP_TYPE_DECAP_PROTOCOL, OP_PCLID_IPSEC,
+ (uint16_t)(cipherdata->algtype | OP_PCL_IPSEC_HMAC_MD5_96));
+/*
+ * TODO: RTA currently doesn't support adding labels in or after Job Descriptor.
+ * To be changed when proper support is added in RTA.
+ */
+ /* Label the SEQ OUT PTR */
+ SET_LABEL(p, seqout_ptr);
+ seqout_ptr += 2;
+ /* Label the Output Length */
+ SET_LABEL(p, outlen);
+ outlen += 4;
+ /* Label the SEQ IN PTR */
+ SET_LABEL(p, seqin_ptr);
+ seqin_ptr += 5;
+ /* Label the first word after JD */
+ SET_LABEL(p, swapped_seqout_fields);
+ swapped_seqout_fields += 8;
+ /* Label the second word after JD */
+ SET_LABEL(p, swapped_seqout_ptr);
+ swapped_seqout_ptr += 9;
+
+ PATCH_HDR(p, phdr, hdr);
+ PATCH_JUMP(p, pkeyjump, keyjump);
+ PATCH_JUMP(p, seqout_ptr_jump, seqout_ptr);
+ PATCH_JUMP(p, swapped_seqout_ptr_jump, swapped_seqout_ptr);
+ PATCH_MOVE(p, move_jump, jump_cmd);
+ PATCH_MOVE(p, move_jump_back, seqin_ptr);
+ PATCH_MOVE(p, move_seqin_ptr, outlen);
+ PATCH_MOVE(p, write_swapped_seqout_ptr, swapped_seqout_fields);
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * IPSEC_NEW_ENC_BASE_DESC_LEN - IPsec new mode encap shared descriptor length
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether Outer IP Header and/or keys can be inlined or
+ * not. To be used as first parameter of rta_inline_query().
+ */
+#define IPSEC_NEW_ENC_BASE_DESC_LEN (5 * CAAM_CMD_SZ + \
+ sizeof(struct ipsec_encap_pdb))
+
+/**
+ * IPSEC_NEW_NULL_ENC_BASE_DESC_LEN - IPsec new mode encap shared descriptor
+ * length for the case of
+ * NULL encryption / authentication
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether Outer IP Header and/or key can be inlined or
+ * not. To be used as first parameter of rta_inline_query().
+ */
+#define IPSEC_NEW_NULL_ENC_BASE_DESC_LEN (4 * CAAM_CMD_SZ + \
+ sizeof(struct ipsec_encap_pdb))
+
+/**
+ * cnstr_shdsc_ipsec_new_encap - IPSec new mode ESP encapsulation
+ * protocol-level shared descriptor.
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: must be true when core endianness doesn't match SEC endianness
+ * @pdb: pointer to the PDB to be used with this descriptor
+ * This structure will be copied inline to the descriptor under
+ * construction. No error checking will be made. Refer to the
+ * block guide for details about the encapsulation PDB.
+ * @opt_ip_hdr: pointer to Optional IP Header
+ * -if OIHI = PDBOPTS_ESP_OIHI_PDB_INL, opt_ip_hdr points to the buffer to
+ * be inlined in the PDB. Number of bytes (buffer size) copied is provided
+ * in pdb->ip_hdr_len.
+ * -if OIHI = PDBOPTS_ESP_OIHI_PDB_REF, opt_ip_hdr points to the address of
+ * the Optional IP Header. The address will be inlined in the PDB verbatim.
+ * -for other values of OIHI options field, opt_ip_hdr is not used.
+ * @cipherdata: pointer to block cipher transform definitions
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ * @authdata: pointer to authentication transform definitions.
+ * If an authentication key is required by the protocol, a "normal"
+ * key must be provided; DKP (Derived Key Protocol) will be used to
+ * compute MDHA on the fly in HW.
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_ipsec_new_encap(uint32_t *descbuf, bool ps,
+ bool swap,
+ struct ipsec_encap_pdb *pdb,
+ uint8_t *opt_ip_hdr,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata)
+{
+ struct program prg;
+ struct program *p = &prg;
+
+ LABEL(keyjmp);
+ REFERENCE(pkeyjmp);
+ LABEL(hdr);
+ REFERENCE(phdr);
+
+ if (rta_sec_era < RTA_SEC_ERA_8) {
+ pr_err("IPsec new mode encap: available only for Era %d or above\n",
+ USER_SEC_ERA(RTA_SEC_ERA_8));
+ return -ENOTSUP;
+ }
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ phdr = SHR_HDR(p, SHR_SERIAL, hdr, 0);
+
+ __rta_copy_ipsec_encap_pdb(p, pdb, cipherdata->algtype);
+
+ switch (pdb->options & PDBOPTS_ESP_OIHI_MASK) {
+ case PDBOPTS_ESP_OIHI_PDB_INL:
+ COPY_DATA(p, opt_ip_hdr, pdb->ip_hdr_len);
+ break;
+ case PDBOPTS_ESP_OIHI_PDB_REF:
+ if (ps)
+ COPY_DATA(p, opt_ip_hdr, 8);
+ else
+ COPY_DATA(p, opt_ip_hdr, 4);
+ break;
+ default:
+ break;
+ }
+ SET_LABEL(p, hdr);
+
+ pkeyjmp = JUMP(p, keyjmp, LOCAL_JUMP, ALL_TRUE, SHRD);
+ if (authdata->keylen)
+ __gen_auth_key(p, authdata);
+ if (cipherdata->keylen)
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ SET_LABEL(p, keyjmp);
+ PROTOCOL(p, OP_TYPE_ENCAP_PROTOCOL,
+ OP_PCLID_IPSEC_NEW,
+ (uint16_t)(cipherdata->algtype | authdata->algtype));
+ PATCH_JUMP(p, pkeyjmp, keyjmp);
+ PATCH_HDR(p, phdr, hdr);
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * IPSEC_NEW_DEC_BASE_DESC_LEN - IPsec new mode decap shared descriptor length
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether keys can be inlined or not. To be used as first
+ * parameter of rta_inline_query().
+ */
+#define IPSEC_NEW_DEC_BASE_DESC_LEN (5 * CAAM_CMD_SZ + \
+ sizeof(struct ipsec_decap_pdb))
+
+/**
+ * IPSEC_NEW_NULL_DEC_BASE_DESC_LEN - IPsec new mode decap shared descriptor
+ * length for the case of
+ * NULL decryption / authentication
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether key can be inlined or not. To be used as first
+ * parameter of rta_inline_query().
+ */
+#define IPSEC_NEW_NULL_DEC_BASE_DESC_LEN (4 * CAAM_CMD_SZ + \
+ sizeof(struct ipsec_decap_pdb))
+
+/**
+ * cnstr_shdsc_ipsec_new_decap - IPSec new mode ESP decapsulation protocol-level
+ * shared descriptor.
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: must be true when core endianness doesn't match SEC endianness
+ * @pdb: pointer to the PDB to be used with this descriptor
+ * This structure will be copied inline to the descriptor under
+ * construction. No error checking will be made. Refer to the
+ * block guide for details about the decapsulation PDB.
+ * @cipherdata: pointer to block cipher transform definitions
+ * Valid algorithm values 0 one of OP_PCL_IPSEC_*
+ * @authdata: pointer to authentication transform definitions.
+ * If an authentication key is required by the protocol, a "normal"
+ * key must be provided; DKP (Derived Key Protocol) will be used to
+ * compute MDHA on the fly in HW.
+ * Valid algorithm values - one of OP_PCL_IPSEC_*
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_ipsec_new_decap(uint32_t *descbuf, bool ps,
+ bool swap,
+ struct ipsec_decap_pdb *pdb,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata)
+{
+ struct program prg;
+ struct program *p = &prg;
+
+ LABEL(keyjmp);
+ REFERENCE(pkeyjmp);
+ LABEL(hdr);
+ REFERENCE(phdr);
+
+ if (rta_sec_era < RTA_SEC_ERA_8) {
+ pr_err("IPsec new mode decap: available only for Era %d or above\n",
+ USER_SEC_ERA(RTA_SEC_ERA_8));
+ return -ENOTSUP;
+ }
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+ phdr = SHR_HDR(p, SHR_SERIAL, hdr, 0);
+ __rta_copy_ipsec_decap_pdb(p, pdb, cipherdata->algtype);
+ SET_LABEL(p, hdr);
+ pkeyjmp = JUMP(p, keyjmp, LOCAL_JUMP, ALL_TRUE, SHRD);
+ if (authdata->keylen)
+ __gen_auth_key(p, authdata);
+ if (cipherdata->keylen)
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+ SET_LABEL(p, keyjmp);
+ PROTOCOL(p, OP_TYPE_DECAP_PROTOCOL,
+ OP_PCLID_IPSEC_NEW,
+ (uint16_t)(cipherdata->algtype | authdata->algtype));
+ PATCH_JUMP(p, pkeyjmp, keyjmp);
+ PATCH_HDR(p, phdr, hdr);
+ return PROGRAM_FINALIZE(p);
+}
+
+/**
+ * IPSEC_AUTH_VAR_BASE_DESC_LEN - IPsec encap/decap shared descriptor length
+ * for the case of variable-length authentication
+ * only data.
+ * Note: Only for SoCs with SEC_ERA >= 3.
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether keys can be inlined or not. To be used as first
+ * parameter of rta_inline_query().
+ */
+#define IPSEC_AUTH_VAR_BASE_DESC_LEN (27 * CAAM_CMD_SZ)
+
+/**
+ * IPSEC_AUTH_VAR_AES_DEC_BASE_DESC_LEN - IPsec AES decap shared descriptor
+ * length for variable-length authentication only
+ * data.
+ * Note: Only for SoCs with SEC_ERA >= 3.
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether key can be inlined or not. To be used as first
+ * parameter of rta_inline_query().
+ */
+#define IPSEC_AUTH_VAR_AES_DEC_BASE_DESC_LEN \
+ (IPSEC_AUTH_VAR_BASE_DESC_LEN + CAAM_CMD_SZ)
+
+/**
+ * IPSEC_AUTH_BASE_DESC_LEN - IPsec encap/decap shared descriptor length
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether key can be inlined or not. To be used as first
+ * parameter of rta_inline_query().
+ */
+#define IPSEC_AUTH_BASE_DESC_LEN (19 * CAAM_CMD_SZ)
+
+/**
+ * IPSEC_AUTH_AES_DEC_BASE_DESC_LEN - IPsec AES decap shared descriptor length
+ *
+ * Accounts only for the "base" commands and is intended to be used by upper
+ * layers to determine whether key can be inlined or not. To be used as first
+ * parameter of rta_inline_query().
+ */
+#define IPSEC_AUTH_AES_DEC_BASE_DESC_LEN (IPSEC_AUTH_BASE_DESC_LEN + \
+ CAAM_CMD_SZ)
+
+/**
+ * cnstr_shdsc_authenc - authenc-like descriptor
+ * @descbuf: pointer to buffer used for descriptor construction
+ * @ps: if 36/40bit addressing is desired, this parameter must be true
+ * @swap: if true, perform descriptor byte swapping on a 4-byte boundary
+ * @cipherdata: ointer to block cipher transform definitions.
+ * Valid algorithm values one of OP_ALG_ALGSEL_* {DES, 3DES, AES}
+ * @authdata: pointer to authentication transform definitions.
+ * Valid algorithm values - one of OP_ALG_ALGSEL_* {MD5, SHA1,
+ * SHA224, SHA256, SHA384, SHA512}
+ * Note: The key for authentication is supposed to be given as plain text.
+ * Note: There's no support for keys longer than the block size of the
+ * underlying hash function, according to the selected algorithm.
+ *
+ * @ivlen: length of the IV to be read from the input frame, before any data
+ * to be processed
+ * @auth_only_len: length of the data to be authenticated-only (commonly IP
+ * header, IV, Sequence number and SPI)
+ * Note: Extended Sequence Number processing is NOT supported
+ *
+ * @trunc_len: the length of the ICV to be written to the output frame. If 0,
+ * then the corresponding length of the digest, according to the
+ * selected algorithm shall be used.
+ * @dir: Protocol direction, encapsulation or decapsulation (DIR_ENC/DIR_DEC)
+ *
+ * Note: Here's how the input frame needs to be formatted so that the processing
+ * will be done correctly:
+ * For encapsulation:
+ * Input:
+ * +----+----------------+---------------------------------------------+
+ * | IV | Auth-only data | Padded data to be authenticated & Encrypted |
+ * +----+----------------+---------------------------------------------+
+ * Output:
+ * +--------------------------------------+
+ * | Authenticated & Encrypted data | ICV |
+ * +--------------------------------+-----+
+
+ * For decapsulation:
+ * Input:
+ * +----+----------------+--------------------------------+-----+
+ * | IV | Auth-only data | Authenticated & Encrypted data | ICV |
+ * +----+----------------+--------------------------------+-----+
+ * Output:
+ * +----+--------------------------+
+ * | Decrypted & authenticated data |
+ * +----+--------------------------+
+ *
+ * Note: This descriptor can use per-packet commands, encoded as below in the
+ * DPOVRD register:
+ * 32 24 16 0
+ * +------+---------------------+
+ * | 0x80 | 0x00| auth_only_len |
+ * +------+---------------------+
+ *
+ * This mechanism is available only for SoCs having SEC ERA >= 3. In other
+ * words, this will not work for P4080TO2
+ *
+ * Note: The descriptor does not add any kind of padding to the input data,
+ * so the upper layer needs to ensure that the data is padded properly,
+ * according to the selected cipher. Failure to do so will result in
+ * the descriptor failing with a data-size error.
+ *
+ * Return: size of descriptor written in words or negative number on error
+ */
+static inline int
+cnstr_shdsc_authenc(uint32_t *descbuf, bool ps, bool swap,
+ struct alginfo *cipherdata,
+ struct alginfo *authdata,
+ uint16_t ivlen, uint16_t auth_only_len,
+ uint8_t trunc_len, uint8_t dir)
+{
+ struct program prg;
+ struct program *p = &prg;
+ const bool is_aes_dec = (dir == DIR_DEC) &&
+ (cipherdata->algtype == OP_ALG_ALGSEL_AES);
+
+ LABEL(skip_patch_len);
+ LABEL(keyjmp);
+ LABEL(skipkeys);
+ LABEL(aonly_len_offset);
+ REFERENCE(pskip_patch_len);
+ REFERENCE(pkeyjmp);
+ REFERENCE(pskipkeys);
+ REFERENCE(read_len);
+ REFERENCE(write_len);
+
+ PROGRAM_CNTXT_INIT(p, descbuf, 0);
+
+ if (swap)
+ PROGRAM_SET_BSWAP(p);
+ if (ps)
+ PROGRAM_SET_36BIT_ADDR(p);
+
+ /*
+ * Since we currently assume that key length is equal to hash digest
+ * size, it's ok to truncate keylen value.
+ */
+ trunc_len = trunc_len && (trunc_len < authdata->keylen) ?
+ trunc_len : (uint8_t)authdata->keylen;
+
+ SHR_HDR(p, SHR_SERIAL, 1, SC);
+
+ /*
+ * M0 will contain the value provided by the user when creating
+ * the shared descriptor. If the user provided an override in
+ * DPOVRD, then M0 will contain that value
+ */
+ MATHB(p, MATH0, ADD, auth_only_len, MATH0, 4, IMMED2);
+
+ if (rta_sec_era >= RTA_SEC_ERA_3) {
+ /*
+ * Check if the user wants to override the auth-only len
+ */
+ MATHB(p, DPOVRD, ADD, 0x80000000, MATH2, 4, IMMED2);
+
+ /*
+ * No need to patch the length of the auth-only data read if
+ * the user did not override it
+ */
+ pskip_patch_len = JUMP(p, skip_patch_len, LOCAL_JUMP, ALL_TRUE,
+ MATH_N);
+
+ /* Get auth-only len in M0 */
+ MATHB(p, MATH2, AND, 0xFFFF, MATH0, 4, IMMED2);
+
+ /*
+ * Since M0 is used in calculations, don't mangle it, copy
+ * its content to M1 and use this for patching.
+ */
+ MATHB(p, MATH0, ADD, MATH1, MATH1, 4, 0);
+
+ read_len = MOVE(p, DESCBUF, 0, MATH1, 0, 6, WAITCOMP | IMMED);
+ write_len = MOVE(p, MATH1, 0, DESCBUF, 0, 8, WAITCOMP | IMMED);
+
+ SET_LABEL(p, skip_patch_len);
+ }
+ /*
+ * MATH0 contains the value in DPOVRD w/o the MSB, or the initial
+ * value, as provided by the user at descriptor creation time
+ */
+ if (dir == DIR_ENC)
+ MATHB(p, MATH0, ADD, ivlen, MATH0, 4, IMMED2);
+ else
+ MATHB(p, MATH0, ADD, ivlen + trunc_len, MATH0, 4, IMMED2);
+
+ pkeyjmp = JUMP(p, keyjmp, LOCAL_JUMP, ALL_TRUE, SHRD);
+
+ KEY(p, KEY2, authdata->key_enc_flags, authdata->key, authdata->keylen,
+ INLINE_KEY(authdata));
+
+ /* Insert Key */
+ KEY(p, KEY1, cipherdata->key_enc_flags, cipherdata->key,
+ cipherdata->keylen, INLINE_KEY(cipherdata));
+
+ /* Do operation */
+ ALG_OPERATION(p, authdata->algtype, OP_ALG_AAI_HMAC,
+ OP_ALG_AS_INITFINAL,
+ dir == DIR_ENC ? ICV_CHECK_DISABLE : ICV_CHECK_ENABLE,
+ dir);
+
+ if (is_aes_dec)
+ ALG_OPERATION(p, OP_ALG_ALGSEL_AES, cipherdata->algmode,
+ OP_ALG_AS_INITFINAL, ICV_CHECK_DISABLE, dir);
+ pskipkeys = JUMP(p, skipkeys, LOCAL_JUMP, ALL_TRUE, 0);
+
+ SET_LABEL(p, keyjmp);
+
+ ALG_OPERATION(p, authdata->algtype, OP_ALG_AAI_HMAC_PRECOMP,
+ OP_ALG_AS_INITFINAL,
+ dir == DIR_ENC ? ICV_CHECK_DISABLE : ICV_CHECK_ENABLE,
+ dir);
+
+ if (is_aes_dec) {
+ ALG_OPERATION(p, OP_ALG_ALGSEL_AES, cipherdata->algmode |
+ OP_ALG_AAI_DK, OP_ALG_AS_INITFINAL,
+ ICV_CHECK_DISABLE, dir);
+ SET_LABEL(p, skipkeys);
+ } else {
+ SET_LABEL(p, skipkeys);
+ ALG_OPERATION(p, cipherdata->algtype, cipherdata->algmode,
+ OP_ALG_AS_INITFINAL, ICV_CHECK_DISABLE, dir);
+ }
+
+ /*
+ * Prepare the length of the data to be both encrypted/decrypted
+ * and authenticated/checked
+ */
+ MATHB(p, SEQINSZ, SUB, MATH0, VSEQINSZ, 4, 0);
+
+ MATHB(p, VSEQINSZ, SUB, MATH3, VSEQOUTSZ, 4, 0);
+
+ /* Prepare for writing the output frame */
+ SEQFIFOSTORE(p, MSG, 0, 0, VLF);
+
+ SET_LABEL(p, aonly_len_offset);
+
+ /* Read IV */
+ SEQLOAD(p, CONTEXT1, 0, ivlen, 0);
+
+ /*
+ * Read data needed only for authentication. This is overwritten above
+ * if the user requested it.
+ */
+ SEQFIFOLOAD(p, MSG2, auth_only_len, 0);
+
+ if (dir == DIR_ENC) {
+ /*
+ * Read input plaintext, encrypt and authenticate & write to
+ * output
+ */
+ SEQFIFOLOAD(p, MSGOUTSNOOP, 0, VLF | LAST1 | LAST2 | FLUSH1);
+
+ /* Finally, write the ICV */
+ SEQSTORE(p, CONTEXT2, 0, trunc_len, 0);
+ } else {
+ /*
+ * Read input ciphertext, decrypt and authenticate & write to
+ * output
+ */
+ SEQFIFOLOAD(p, MSGINSNOOP, 0, VLF | LAST1 | LAST2 | FLUSH1);
+
+ /* Read the ICV to check */
+ SEQFIFOLOAD(p, ICV2, trunc_len, LAST2);
+ }
+
+ PATCH_JUMP(p, pkeyjmp, keyjmp);
+ PATCH_JUMP(p, pskipkeys, skipkeys);
+ PATCH_JUMP(p, pskipkeys, skipkeys);
+
+ if (rta_sec_era >= RTA_SEC_ERA_3) {
+ PATCH_JUMP(p, pskip_patch_len, skip_patch_len);
+ PATCH_MOVE(p, read_len, aonly_len_offset);
+ PATCH_MOVE(p, write_len, aonly_len_offset);
+ }
+
+ return PROGRAM_FINALIZE(p);
+}
+
+#endif /* __DESC_IPSEC_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta.h b/drivers/crypto/dpaa2_sec/hw/rta.h
new file mode 100644
index 00000000..7cf4c8a9
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta.h
@@ -0,0 +1,954 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_RTA_H__
+#define __RTA_RTA_H__
+
+#include "rta/sec_run_time_asm.h"
+#include "rta/fifo_load_store_cmd.h"
+#include "rta/header_cmd.h"
+#include "rta/jump_cmd.h"
+#include "rta/key_cmd.h"
+#include "rta/load_cmd.h"
+#include "rta/math_cmd.h"
+#include "rta/move_cmd.h"
+#include "rta/nfifo_cmd.h"
+#include "rta/operation_cmd.h"
+#include "rta/protocol_cmd.h"
+#include "rta/seq_in_out_ptr_cmd.h"
+#include "rta/signature_cmd.h"
+#include "rta/store_cmd.h"
+
+/**
+ * DOC: About
+ *
+ * RTA (Runtime Assembler) Library is an easy and flexible runtime method for
+ * writing SEC descriptors. It implements a thin abstraction layer above
+ * SEC commands set; the resulting code is compact and similar to a
+ * descriptor sequence.
+ *
+ * RTA library improves comprehension of the SEC code, adds flexibility for
+ * writing complex descriptors and keeps the code lightweight. Should be used
+ * by whom needs to encode descriptors at runtime, with comprehensible flow
+ * control in descriptor.
+ */
+
+/**
+ * DOC: Usage
+ *
+ * RTA is used in kernel space by the SEC / CAAM (Cryptographic Acceleration and
+ * Assurance Module) kernel module (drivers/crypto/caam) and SEC / CAAM QI
+ * kernel module (Freescale QorIQ SDK).
+ *
+ * RTA is used in user space by USDPAA - User Space DataPath Acceleration
+ * Architecture (Freescale QorIQ SDK).
+ */
+
+/**
+ * DOC: Descriptor Buffer Management Routines
+ *
+ * Contains details of RTA descriptor buffer management and SEC Era
+ * management routines.
+ */
+
+/**
+ * PROGRAM_CNTXT_INIT - must be called before any descriptor run-time assembly
+ * call type field carry info i.e. whether descriptor is
+ * shared or job descriptor.
+ * @program: pointer to struct program
+ * @buffer: input buffer where the descriptor will be placed (uint32_t *)
+ * @offset: offset in input buffer from where the data will be written
+ * (unsigned int)
+ */
+#define PROGRAM_CNTXT_INIT(program, buffer, offset) \
+ rta_program_cntxt_init(program, buffer, offset)
+
+/**
+ * PROGRAM_FINALIZE - must be called to mark completion of RTA call.
+ * @program: pointer to struct program
+ *
+ * Return: total size of the descriptor in words or negative number on error.
+ */
+#define PROGRAM_FINALIZE(program) rta_program_finalize(program)
+
+/**
+ * PROGRAM_SET_36BIT_ADDR - must be called to set pointer size to 36 bits
+ * @program: pointer to struct program
+ *
+ * Return: current size of the descriptor in words (unsigned int).
+ */
+#define PROGRAM_SET_36BIT_ADDR(program) rta_program_set_36bit_addr(program)
+
+/**
+ * PROGRAM_SET_BSWAP - must be called to enable byte swapping
+ * @program: pointer to struct program
+ *
+ * Byte swapping on a 4-byte boundary will be performed at the end - when
+ * calling PROGRAM_FINALIZE().
+ *
+ * Return: current size of the descriptor in words (unsigned int).
+ */
+#define PROGRAM_SET_BSWAP(program) rta_program_set_bswap(program)
+
+/**
+ * WORD - must be called to insert in descriptor buffer a 32bit value
+ * @program: pointer to struct program
+ * @val: input value to be written in descriptor buffer (uint32_t)
+ *
+ * Return: the descriptor buffer offset where this command is inserted
+ * (unsigned int).
+ */
+#define WORD(program, val) rta_word(program, val)
+
+/**
+ * DWORD - must be called to insert in descriptor buffer a 64bit value
+ * @program: pointer to struct program
+ * @val: input value to be written in descriptor buffer (uint64_t)
+ *
+ * Return: the descriptor buffer offset where this command is inserted
+ * (unsigned int).
+ */
+#define DWORD(program, val) rta_dword(program, val)
+
+/**
+ * COPY_DATA - must be called to insert in descriptor buffer data larger than
+ * 64bits.
+ * @program: pointer to struct program
+ * @data: input data to be written in descriptor buffer (uint8_t *)
+ * @len: length of input data (unsigned int)
+ *
+ * Return: the descriptor buffer offset where this command is inserted
+ * (unsigned int).
+ */
+#define COPY_DATA(program, data, len) rta_copy_data(program, (data), (len))
+
+/**
+ * DESC_LEN - determines job / shared descriptor buffer length (in words)
+ * @buffer: descriptor buffer (uint32_t *)
+ *
+ * Return: descriptor buffer length in words (unsigned int).
+ */
+#define DESC_LEN(buffer) rta_desc_len(buffer)
+
+/**
+ * DESC_BYTES - determines job / shared descriptor buffer length (in bytes)
+ * @buffer: descriptor buffer (uint32_t *)
+ *
+ * Return: descriptor buffer length in bytes (unsigned int).
+ */
+#define DESC_BYTES(buffer) rta_desc_bytes(buffer)
+
+/*
+ * SEC HW block revision.
+ *
+ * This *must not be confused with SEC version*:
+ * - SEC HW block revision format is "v"
+ * - SEC revision format is "x.y"
+ */
+extern enum rta_sec_era rta_sec_era;
+
+/**
+ * rta_set_sec_era - Set SEC Era HW block revision for which the RTA library
+ * will generate the descriptors.
+ * @era: SEC Era (enum rta_sec_era)
+ *
+ * Return: 0 if the ERA was set successfully, -1 otherwise (int)
+ *
+ * Warning 1: Must be called *only once*, *before* using any other RTA API
+ * routine.
+ *
+ * Warning 2: *Not thread safe*.
+ */
+static inline int
+rta_set_sec_era(enum rta_sec_era era)
+{
+ if (era > MAX_SEC_ERA) {
+ rta_sec_era = DEFAULT_SEC_ERA;
+ pr_err("Unsupported SEC ERA. Defaulting to ERA %d\n",
+ DEFAULT_SEC_ERA + 1);
+ return -1;
+ }
+
+ rta_sec_era = era;
+ return 0;
+}
+
+/**
+ * rta_get_sec_era - Get SEC Era HW block revision for which the RTA library
+ * will generate the descriptors.
+ *
+ * Return: SEC Era (unsigned int).
+ */
+static inline unsigned int
+rta_get_sec_era(void)
+{
+ return rta_sec_era;
+}
+
+/**
+ * DOC: SEC Commands Routines
+ *
+ * Contains details of RTA wrapper routines over SEC engine commands.
+ */
+
+/**
+ * SHR_HDR - Configures Shared Descriptor HEADER command
+ * @program: pointer to struct program
+ * @share: descriptor share state (enum rta_share_type)
+ * @start_idx: index in descriptor buffer where the execution of the shared
+ * descriptor should start (@c unsigned int).
+ * @flags: operational flags: RIF, DNR, CIF, SC, PD
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SHR_HDR(program, share, start_idx, flags) \
+ rta_shr_header(program, share, start_idx, flags)
+
+/**
+ * JOB_HDR - Configures JOB Descriptor HEADER command
+ * @program: pointer to struct program
+ * @share: descriptor share state (enum rta_share_type)
+ * @start_idx: index in descriptor buffer where the execution of the job
+ * descriptor should start (unsigned int). In case SHR bit is present
+ * in flags, this will be the shared descriptor length.
+ * @share_desc: pointer to shared descriptor, in case SHR bit is set (uint64_t)
+ * @flags: operational flags: RSMS, DNR, TD, MTD, REO, SHR
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define JOB_HDR(program, share, start_idx, share_desc, flags) \
+ rta_job_header(program, share, start_idx, share_desc, flags, 0)
+
+/**
+ * JOB_HDR_EXT - Configures JOB Descriptor HEADER command
+ * @program: pointer to struct program
+ * @share: descriptor share state (enum rta_share_type)
+ * @start_idx: index in descriptor buffer where the execution of the job
+ * descriptor should start (unsigned int). In case SHR bit is present
+ * in flags, this will be the shared descriptor length.
+ * @share_desc: pointer to shared descriptor, in case SHR bit is set (uint64_t)
+ * @flags: operational flags: RSMS, DNR, TD, MTD, REO, SHR
+ * @ext_flags: extended header flags: DSV (DECO Select Valid), DECO Id (limited
+ * by DSEL_MASK).
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define JOB_HDR_EXT(program, share, start_idx, share_desc, flags, ext_flags) \
+ rta_job_header(program, share, start_idx, share_desc, flags | EXT, \
+ ext_flags)
+
+/**
+ * MOVE - Configures MOVE and MOVE_LEN commands
+ * @program: pointer to struct program
+ * @src: internal source of data that will be moved: CONTEXT1, CONTEXT2, OFIFO,
+ * DESCBUF, MATH0-MATH3, IFIFOABD, IFIFOAB1, IFIFOAB2, AB1, AB2, ABD.
+ * @src_offset: offset in source data (uint16_t)
+ * @dst: internal destination of data that will be moved: CONTEXT1, CONTEXT2,
+ * OFIFO, DESCBUF, MATH0-MATH3, IFIFOAB1, IFIFOAB2, IFIFO, PKA, KEY1,
+ * KEY2, ALTSOURCE.
+ * @dst_offset: offset in destination data (uint16_t)
+ * @length: size of data to be moved: for MOVE must be specified as immediate
+ * value and IMMED flag must be set; for MOVE_LEN must be specified
+ * using MATH0-MATH3.
+ * @opt: operational flags: WAITCOMP, FLUSH1, FLUSH2, LAST1, LAST2, SIZE_WORD,
+ * SIZE_BYTE, SIZE_DWORD, IMMED (not valid for MOVE_LEN).
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define MOVE(program, src, src_offset, dst, dst_offset, length, opt) \
+ rta_move(program, __MOVE, src, src_offset, dst, dst_offset, length, opt)
+
+/**
+ * MOVEB - Configures MOVEB command
+ * @program: pointer to struct program
+ * @src: internal source of data that will be moved: CONTEXT1, CONTEXT2, OFIFO,
+ * DESCBUF, MATH0-MATH3, IFIFOABD, IFIFOAB1, IFIFOAB2, AB1, AB2, ABD.
+ * @src_offset: offset in source data (uint16_t)
+ * @dst: internal destination of data that will be moved: CONTEXT1, CONTEXT2,
+ * OFIFO, DESCBUF, MATH0-MATH3, IFIFOAB1, IFIFOAB2, IFIFO, PKA, KEY1,
+ * KEY2, ALTSOURCE.
+ * @dst_offset: offset in destination data (uint16_t)
+ * @length: size of data to be moved: for MOVE must be specified as immediate
+ * value and IMMED flag must be set; for MOVE_LEN must be specified
+ * using MATH0-MATH3.
+ * @opt: operational flags: WAITCOMP, FLUSH1, FLUSH2, LAST1, LAST2, SIZE_WORD,
+ * SIZE_BYTE, SIZE_DWORD, IMMED (not valid for MOVE_LEN).
+ *
+ * Identical with MOVE command if byte swapping not enabled; else - when src/dst
+ * is descriptor buffer or MATH registers, data type is byte array when MOVE
+ * data type is 4-byte array and vice versa.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define MOVEB(program, src, src_offset, dst, dst_offset, length, opt) \
+ rta_move(program, __MOVEB, src, src_offset, dst, dst_offset, length, \
+ opt)
+
+/**
+ * MOVEDW - Configures MOVEDW command
+ * @program: pointer to struct program
+ * @src: internal source of data that will be moved: CONTEXT1, CONTEXT2, OFIFO,
+ * DESCBUF, MATH0-MATH3, IFIFOABD, IFIFOAB1, IFIFOAB2, AB1, AB2, ABD.
+ * @src_offset: offset in source data (uint16_t)
+ * @dst: internal destination of data that will be moved: CONTEXT1, CONTEXT2,
+ * OFIFO, DESCBUF, MATH0-MATH3, IFIFOAB1, IFIFOAB2, IFIFO, PKA, KEY1,
+ * KEY2, ALTSOURCE.
+ * @dst_offset: offset in destination data (uint16_t)
+ * @length: size of data to be moved: for MOVE must be specified as immediate
+ * value and IMMED flag must be set; for MOVE_LEN must be specified
+ * using MATH0-MATH3.
+ * @opt: operational flags: WAITCOMP, FLUSH1, FLUSH2, LAST1, LAST2, SIZE_WORD,
+ * SIZE_BYTE, SIZE_DWORD, IMMED (not valid for MOVE_LEN).
+ *
+ * Identical with MOVE command, with the following differences: data type is
+ * 8-byte array; word swapping is performed when SEC is programmed in little
+ * endian mode.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define MOVEDW(program, src, src_offset, dst, dst_offset, length, opt) \
+ rta_move(program, __MOVEDW, src, src_offset, dst, dst_offset, length, \
+ opt)
+
+/**
+ * FIFOLOAD - Configures FIFOLOAD command to load message data, PKHA data, IV,
+ * ICV, AAD and bit length message data into Input Data FIFO.
+ * @program: pointer to struct program
+ * @data: input data type to store: PKHA registers, IFIFO, MSG1, MSG2,
+ * MSGOUTSNOOP, MSGINSNOOP, IV1, IV2, AAD1, ICV1, ICV2, BIT_DATA, SKIP.
+ * @src: pointer or actual data in case of immediate load; IMMED, COPY and DCOPY
+ * flags indicate action taken (inline imm data, inline ptr, inline from
+ * ptr).
+ * @length: number of bytes to load (uint32_t)
+ * @flags: operational flags: SGF, IMMED, EXT, CLASS1, CLASS2, BOTH, FLUSH1,
+ * LAST1, LAST2, COPY, DCOPY.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define FIFOLOAD(program, data, src, length, flags) \
+ rta_fifo_load(program, data, src, length, flags)
+
+/**
+ * SEQFIFOLOAD - Configures SEQ FIFOLOAD command to load message data, PKHA
+ * data, IV, ICV, AAD and bit length message data into Input Data
+ * FIFO.
+ * @program: pointer to struct program
+ * @data: input data type to store: PKHA registers, IFIFO, MSG1, MSG2,
+ * MSGOUTSNOOP, MSGINSNOOP, IV1, IV2, AAD1, ICV1, ICV2, BIT_DATA, SKIP.
+ * @length: number of bytes to load; can be set to 0 for SEQ command w/ VLF set
+ * (uint32_t).
+ * @flags: operational flags: VLF, CLASS1, CLASS2, BOTH, FLUSH1, LAST1, LAST2,
+ * AIDF.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SEQFIFOLOAD(program, data, length, flags) \
+ rta_fifo_load(program, data, NONE, length, flags|SEQ)
+
+/**
+ * FIFOSTORE - Configures FIFOSTORE command, to move data from Output Data FIFO
+ * to external memory via DMA.
+ * @program: pointer to struct program
+ * @data: output data type to store: PKHA registers, IFIFO, OFIFO, RNG,
+ * RNGOFIFO, AFHA_SBOX, MDHA_SPLIT_KEY, MSG, KEY1, KEY2, SKIP.
+ * @encrypt_flags: store data encryption mode: EKT, TK
+ * @dst: pointer to store location (uint64_t)
+ * @length: number of bytes to load (uint32_t)
+ * @flags: operational flags: SGF, CONT, EXT, CLASS1, CLASS2, BOTH
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define FIFOSTORE(program, data, encrypt_flags, dst, length, flags) \
+ rta_fifo_store(program, data, encrypt_flags, dst, length, flags)
+
+/**
+ * SEQFIFOSTORE - Configures SEQ FIFOSTORE command, to move data from Output
+ * Data FIFO to external memory via DMA.
+ * @program: pointer to struct program
+ * @data: output data type to store: PKHA registers, IFIFO, OFIFO, RNG,
+ * RNGOFIFO, AFHA_SBOX, MDHA_SPLIT_KEY, MSG, KEY1, KEY2, METADATA, SKIP.
+ * @encrypt_flags: store data encryption mode: EKT, TK
+ * @length: number of bytes to load; can be set to 0 for SEQ command w/ VLF set
+ * (uint32_t).
+ * @flags: operational flags: VLF, CONT, EXT, CLASS1, CLASS2, BOTH
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SEQFIFOSTORE(program, data, encrypt_flags, length, flags) \
+ rta_fifo_store(program, data, encrypt_flags, 0, length, flags|SEQ)
+
+/**
+ * KEY - Configures KEY and SEQ KEY commands
+ * @program: pointer to struct program
+ * @key_dst: key store location: KEY1, KEY2, PKE, AFHA_SBOX, MDHA_SPLIT_KEY
+ * @encrypt_flags: key encryption mode: ENC, EKT, TK, NWB, PTS
+ * @src: pointer or actual data in case of immediate load (uint64_t); IMMED,
+ * COPY and DCOPY flags indicate action taken (inline imm data,
+ * inline ptr, inline from ptr).
+ * @length: number of bytes to load; can be set to 0 for SEQ command w/ VLF set
+ * (uint32_t).
+ * @flags: operational flags: for KEY: SGF, IMMED, COPY, DCOPY; for SEQKEY: SEQ,
+ * VLF, AIDF.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define KEY(program, key_dst, encrypt_flags, src, length, flags) \
+ rta_key(program, key_dst, encrypt_flags, src, length, flags)
+
+/**
+ * SEQINPTR - Configures SEQ IN PTR command
+ * @program: pointer to struct program
+ * @src: starting address for Input Sequence (uint64_t)
+ * @length: number of bytes in (or to be added to) Input Sequence (uint32_t)
+ * @flags: operational flags: RBS, INL, SGF, PRE, EXT, RTO, RJD, SOP (when PRE,
+ * RTO or SOP are set, @src parameter must be 0).
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SEQINPTR(program, src, length, flags) \
+ rta_seq_in_ptr(program, src, length, flags)
+
+/**
+ * SEQOUTPTR - Configures SEQ OUT PTR command
+ * @program: pointer to struct program
+ * @dst: starting address for Output Sequence (uint64_t)
+ * @length: number of bytes in (or to be added to) Output Sequence (uint32_t)
+ * @flags: operational flags: SGF, PRE, EXT, RTO, RST, EWS (when PRE or RTO are
+ * set, @dst parameter must be 0).
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SEQOUTPTR(program, dst, length, flags) \
+ rta_seq_out_ptr(program, dst, length, flags)
+
+/**
+ * ALG_OPERATION - Configures ALGORITHM OPERATION command
+ * @program: pointer to struct program
+ * @cipher_alg: algorithm to be used
+ * @aai: Additional Algorithm Information; contains mode information that is
+ * associated with the algorithm (check desc.h for specific values).
+ * @algo_state: algorithm state; defines the state of the algorithm that is
+ * being executed (check desc.h file for specific values).
+ * @icv_check: ICV checking; selects whether the algorithm should check
+ * calculated ICV with known ICV: ICV_CHECK_ENABLE,
+ * ICV_CHECK_DISABLE.
+ * @enc: selects between encryption and decryption: DIR_ENC, DIR_DEC
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define ALG_OPERATION(program, cipher_alg, aai, algo_state, icv_check, enc) \
+ rta_operation(program, cipher_alg, aai, algo_state, icv_check, enc)
+
+/**
+ * PROTOCOL - Configures PROTOCOL OPERATION command
+ * @program: pointer to struct program
+ * @optype: operation type: OP_TYPE_UNI_PROTOCOL / OP_TYPE_DECAP_PROTOCOL /
+ * OP_TYPE_ENCAP_PROTOCOL.
+ * @protid: protocol identifier value (check desc.h file for specific values)
+ * @protoinfo: protocol dependent value (check desc.h file for specific values)
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define PROTOCOL(program, optype, protid, protoinfo) \
+ rta_proto_operation(program, optype, protid, protoinfo)
+
+/**
+ * DKP_PROTOCOL - Configures DKP (Derived Key Protocol) PROTOCOL command
+ * @program: pointer to struct program
+ * @protid: protocol identifier value - one of the following:
+ * OP_PCLID_DKP_{MD5 | SHA1 | SHA224 | SHA256 | SHA384 | SHA512}
+ * @key_src: How the initial ("negotiated") key is provided to the DKP protocol.
+ * Valid values - one of OP_PCL_DKP_SRC_{IMM, SEQ, PTR, SGF}. Not all
+ * (key_src,key_dst) combinations are allowed.
+ * @key_dst: How the derived ("split") key is returned by the DKP protocol.
+ * Valid values - one of OP_PCL_DKP_DST_{IMM, SEQ, PTR, SGF}. Not all
+ * (key_src,key_dst) combinations are allowed.
+ * @keylen: length of the initial key, in bytes (uint16_t)
+ * @key: address where algorithm key resides; virtual address if key_type is
+ * RTA_DATA_IMM, physical (bus) address if key_type is RTA_DATA_PTR or
+ * RTA_DATA_IMM_DMA.
+ * @key_type: enum rta_data_type
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define DKP_PROTOCOL(program, protid, key_src, key_dst, keylen, key, key_type) \
+ rta_dkp_proto(program, protid, key_src, key_dst, keylen, key, key_type)
+
+/**
+ * PKHA_OPERATION - Configures PKHA OPERATION command
+ * @program: pointer to struct program
+ * @op_pkha: PKHA operation; indicates the modular arithmetic function to
+ * execute (check desc.h file for specific values).
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define PKHA_OPERATION(program, op_pkha) rta_pkha_operation(program, op_pkha)
+
+/**
+ * JUMP - Configures JUMP command
+ * @program: pointer to struct program
+ * @addr: local offset for local jumps or address pointer for non-local jumps;
+ * IMM or PTR macros must be used to indicate type.
+ * @jump_type: type of action taken by jump (enum rta_jump_type)
+ * @test_type: defines how jump conditions are evaluated (enum rta_jump_cond)
+ * @cond: jump conditions: operational flags - DONE1, DONE2, BOTH; various
+ * sharing and wait conditions (JSL = 1) - NIFP, NIP, NOP, NCP, CALM,
+ * SELF, SHARED, JQP; Math and PKHA status conditions (JSL = 0) - Z, N,
+ * NV, C, PK0, PK1, PKP.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define JUMP(program, addr, jump_type, test_type, cond) \
+ rta_jump(program, addr, jump_type, test_type, cond, NONE)
+
+/**
+ * JUMP_INC - Configures JUMP_INC command
+ * @program: pointer to struct program
+ * @addr: local offset; IMM or PTR macros must be used to indicate type
+ * @test_type: defines how jump conditions are evaluated (enum rta_jump_cond)
+ * @cond: jump conditions: Math status conditions (JSL = 0): Z, N, NV, C
+ * @src_dst: register to increment / decrement: MATH0-MATH3, DPOVRD, SEQINSZ,
+ * SEQOUTSZ, VSEQINSZ, VSEQOUTSZ.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define JUMP_INC(program, addr, test_type, cond, src_dst) \
+ rta_jump(program, addr, LOCAL_JUMP_INC, test_type, cond, src_dst)
+
+/**
+ * JUMP_DEC - Configures JUMP_DEC command
+ * @program: pointer to struct program
+ * @addr: local offset; IMM or PTR macros must be used to indicate type
+ * @test_type: defines how jump conditions are evaluated (enum rta_jump_cond)
+ * @cond: jump conditions: Math status conditions (JSL = 0): Z, N, NV, C
+ * @src_dst: register to increment / decrement: MATH0-MATH3, DPOVRD, SEQINSZ,
+ * SEQOUTSZ, VSEQINSZ, VSEQOUTSZ.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define JUMP_DEC(program, addr, test_type, cond, src_dst) \
+ rta_jump(program, addr, LOCAL_JUMP_DEC, test_type, cond, src_dst)
+
+/**
+ * LOAD - Configures LOAD command to load data registers from descriptor or from
+ * a memory location.
+ * @program: pointer to struct program
+ * @addr: immediate value or pointer to the data to be loaded; IMMED, COPY and
+ * DCOPY flags indicate action taken (inline imm data, inline ptr, inline
+ * from ptr).
+ * @dst: destination register (uint64_t)
+ * @offset: start point to write data in destination register (uint32_t)
+ * @length: number of bytes to load (uint32_t)
+ * @flags: operational flags: VLF, IMMED, COPY, DCOPY
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define LOAD(program, addr, dst, offset, length, flags) \
+ rta_load(program, addr, dst, offset, length, flags)
+
+/**
+ * SEQLOAD - Configures SEQ LOAD command to load data registers from descriptor
+ * or from a memory location.
+ * @program: pointer to struct program
+ * @dst: destination register (uint64_t)
+ * @offset: start point to write data in destination register (uint32_t)
+ * @length: number of bytes to load (uint32_t)
+ * @flags: operational flags: SGF
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SEQLOAD(program, dst, offset, length, flags) \
+ rta_load(program, NONE, dst, offset, length, flags|SEQ)
+
+/**
+ * STORE - Configures STORE command to read data from registers and write them
+ * to a memory location.
+ * @program: pointer to struct program
+ * @src: immediate value or source register for data to be stored: KEY1SZ,
+ * KEY2SZ, DJQDA, MODE1, MODE2, DJQCTRL, DATA1SZ, DATA2SZ, DSTAT, ICV1SZ,
+ * ICV2SZ, DPID, CCTRL, ICTRL, CLRW, CSTAT, MATH0-MATH3, PKHA registers,
+ * CONTEXT1, CONTEXT2, DESCBUF, JOBDESCBUF, SHAREDESCBUF. In case of
+ * immediate value, IMMED, COPY and DCOPY flags indicate action taken
+ * (inline imm data, inline ptr, inline from ptr).
+ * @offset: start point for reading from source register (uint16_t)
+ * @dst: pointer to store location (uint64_t)
+ * @length: number of bytes to store (uint32_t)
+ * @flags: operational flags: VLF, IMMED, COPY, DCOPY
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define STORE(program, src, offset, dst, length, flags) \
+ rta_store(program, src, offset, dst, length, flags)
+
+/**
+ * SEQSTORE - Configures SEQ STORE command to read data from registers and write
+ * them to a memory location.
+ * @program: pointer to struct program
+ * @src: immediate value or source register for data to be stored: KEY1SZ,
+ * KEY2SZ, DJQDA, MODE1, MODE2, DJQCTRL, DATA1SZ, DATA2SZ, DSTAT, ICV1SZ,
+ * ICV2SZ, DPID, CCTRL, ICTRL, CLRW, CSTAT, MATH0-MATH3, PKHA registers,
+ * CONTEXT1, CONTEXT2, DESCBUF, JOBDESCBUF, SHAREDESCBUF. In case of
+ * immediate value, IMMED, COPY and DCOPY flags indicate action taken
+ * (inline imm data, inline ptr, inline from ptr).
+ * @offset: start point for reading from source register (uint16_t)
+ * @length: number of bytes to store (uint32_t)
+ * @flags: operational flags: SGF, IMMED, COPY, DCOPY
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SEQSTORE(program, src, offset, length, flags) \
+ rta_store(program, src, offset, NONE, length, flags|SEQ)
+
+/**
+ * MATHB - Configures MATHB command to perform binary operations
+ * @program: pointer to struct program
+ * @operand1: first operand: MATH0-MATH3, DPOVRD, SEQINSZ, SEQOUTSZ, VSEQINSZ,
+ * VSEQOUTSZ, ZERO, ONE, NONE, Immediate value. IMMED must be used to
+ * indicate immediate value.
+ * @operator: function to be performed: ADD, ADDC, SUB, SUBB, OR, AND, XOR,
+ * LSHIFT, RSHIFT, SHLD.
+ * @operand2: second operand: MATH0-MATH3, DPOVRD, VSEQINSZ, VSEQOUTSZ, ABD,
+ * OFIFO, JOBSRC, ZERO, ONE, Immediate value. IMMED2 must be used to
+ * indicate immediate value.
+ * @result: destination for the result: MATH0-MATH3, DPOVRD, SEQINSZ, SEQOUTSZ,
+ * NONE, VSEQINSZ, VSEQOUTSZ.
+ * @length: length in bytes of the operation and the immediate value, if there
+ * is one (int).
+ * @opt: operational flags: IFB, NFU, STL, SWP, IMMED, IMMED2
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define MATHB(program, operand1, operator, operand2, result, length, opt) \
+ rta_math(program, operand1, MATH_FUN_##operator, operand2, result, \
+ length, opt)
+
+/**
+ * MATHI - Configures MATHI command to perform binary operations
+ * @program: pointer to struct program
+ * @operand: if !SSEL: MATH0-MATH3, DPOVRD, SEQINSZ, SEQOUTSZ, VSEQINSZ,
+ * VSEQOUTSZ, ZERO, ONE.
+ * if SSEL: MATH0-MATH3, DPOVRD, VSEQINSZ, VSEQOUTSZ, ABD, OFIFO,
+ * JOBSRC, ZERO, ONE.
+ * @operator: function to be performed: ADD, ADDC, SUB, SUBB, OR, AND, XOR,
+ * LSHIFT, RSHIFT, FBYT (for !SSEL only).
+ * @imm: Immediate value (uint8_t). IMMED must be used to indicate immediate
+ * value.
+ * @result: destination for the result: MATH0-MATH3, DPOVRD, SEQINSZ, SEQOUTSZ,
+ * NONE, VSEQINSZ, VSEQOUTSZ.
+ * @length: length in bytes of the operation and the immediate value, if there
+ * is one (int). @imm is left-extended with zeros if needed.
+ * @opt: operational flags: NFU, SSEL, SWP, IMMED
+ *
+ * If !SSEL, @operand <@operator> @imm -> @result
+ * If SSEL, @imm <@operator> @operand -> @result
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define MATHI(program, operand, operator, imm, result, length, opt) \
+ rta_mathi(program, operand, MATH_FUN_##operator, imm, result, length, \
+ opt)
+
+/**
+ * MATHU - Configures MATHU command to perform unary operations
+ * @program: pointer to struct program
+ * @operand1: operand: MATH0-MATH3, DPOVRD, SEQINSZ, SEQOUTSZ, VSEQINSZ,
+ * VSEQOUTSZ, ZERO, ONE, NONE, Immediate value. IMMED must be used to
+ * indicate immediate value.
+ * @operator: function to be performed: ZBYT, BSWAP
+ * @result: destination for the result: MATH0-MATH3, DPOVRD, SEQINSZ, SEQOUTSZ,
+ * NONE, VSEQINSZ, VSEQOUTSZ.
+ * @length: length in bytes of the operation and the immediate value, if there
+ * is one (int).
+ * @opt: operational flags: NFU, STL, SWP, IMMED
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define MATHU(program, operand1, operator, result, length, opt) \
+ rta_math(program, operand1, MATH_FUN_##operator, NONE, result, length, \
+ opt)
+
+/**
+ * SIGNATURE - Configures SIGNATURE command
+ * @program: pointer to struct program
+ * @sign_type: signature type: SIGN_TYPE_FINAL, SIGN_TYPE_FINAL_RESTORE,
+ * SIGN_TYPE_FINAL_NONZERO, SIGN_TYPE_IMM_2, SIGN_TYPE_IMM_3,
+ * SIGN_TYPE_IMM_4.
+ *
+ * After SIGNATURE command, DWORD or WORD must be used to insert signature in
+ * descriptor buffer.
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define SIGNATURE(program, sign_type) rta_signature(program, sign_type)
+
+/**
+ * NFIFOADD - Configures NFIFO command, a shortcut of RTA Load command to write
+ * to iNfo FIFO.
+ * @program: pointer to struct program
+ * @src: source for the input data in Alignment Block:IFIFO, OFIFO, PAD,
+ * MSGOUTSNOOP, ALTSOURCE, OFIFO_SYNC, MSGOUTSNOOP_ALT.
+ * @data: type of data that is going through the Input Data FIFO: MSG, MSG1,
+ * MSG2, IV1, IV2, ICV1, ICV2, SAD1, AAD1, AAD2, AFHA_SBOX, SKIP,
+ * PKHA registers, AB1, AB2, ABD.
+ * @length: length of the data copied in FIFO registers (uint32_t)
+ * @flags: select options between:
+ * -operational flags: LAST1, LAST2, FLUSH1, FLUSH2, OC, BP
+ * -when PAD is selected as source: BM, PR, PS
+ * -padding type: <em>PAD_ZERO, PAD_NONZERO, PAD_INCREMENT, PAD_RANDOM,
+ * PAD_ZERO_N1, PAD_NONZERO_0, PAD_N1, PAD_NONZERO_N
+ *
+ * Return: On success, descriptor buffer offset where this command is inserted.
+ * On error, a negative error code; first error program counter will
+ * point to offset in descriptor buffer where the instruction should
+ * have been written.
+ */
+#define NFIFOADD(program, src, data, length, flags) \
+ rta_nfifo_load(program, src, data, length, flags)
+
+/**
+ * DOC: Self Referential Code Management Routines
+ *
+ * Contains details of RTA self referential code routines.
+ */
+
+/**
+ * REFERENCE - initialize a variable used for storing an index inside a
+ * descriptor buffer.
+ * @ref: reference to a descriptor buffer's index where an update is required
+ * with a value that will be known latter in the program flow.
+ */
+#define REFERENCE(ref) int ref = -1
+
+/**
+ * LABEL - initialize a variable used for storing an index inside a descriptor
+ * buffer.
+ * @label: label stores the value with what should be updated the REFERENCE line
+ * in the descriptor buffer.
+ */
+#define LABEL(label) unsigned int label = 0
+
+/**
+ * SET_LABEL - set a LABEL value
+ * @program: pointer to struct program
+ * @label: value that will be inserted in a line previously written in the
+ * descriptor buffer.
+ */
+#define SET_LABEL(program, label) (label = rta_set_label(program))
+
+/**
+ * PATCH_JUMP - Auxiliary command to resolve self referential code
+ * @program: buffer to be updated (struct program *)
+ * @line: position in descriptor buffer where the update will be done; this
+ * value is previously retained in program flow using a reference near
+ * the sequence to be modified.
+ * @new_ref: updated value that will be inserted in descriptor buffer at the
+ * specified line; this value is previously obtained using SET_LABEL
+ * macro near the line that will be used as reference (unsigned int).
+ * For JUMP command, the value represents the offset field (in words).
+ *
+ * Return: 0 in case of success, a negative error code if it fails
+ */
+#define PATCH_JUMP(program, line, new_ref) rta_patch_jmp(program, line, new_ref)
+
+/**
+ * PATCH_MOVE - Auxiliary command to resolve self referential code
+ * @program: buffer to be updated (struct program *)
+ * @line: position in descriptor buffer where the update will be done; this
+ * value is previously retained in program flow using a reference near
+ * the sequence to be modified.
+ * @new_ref: updated value that will be inserted in descriptor buffer at the
+ * specified line; this value is previously obtained using SET_LABEL
+ * macro near the line that will be used as reference (unsigned int).
+ * For MOVE command, the value represents the offset field (in words).
+ *
+ * Return: 0 in case of success, a negative error code if it fails
+ */
+#define PATCH_MOVE(program, line, new_ref) \
+ rta_patch_move(program, line, new_ref)
+
+/**
+ * PATCH_LOAD - Auxiliary command to resolve self referential code
+ * @program: buffer to be updated (struct program *)
+ * @line: position in descriptor buffer where the update will be done; this
+ * value is previously retained in program flow using a reference near
+ * the sequence to be modified.
+ * @new_ref: updated value that will be inserted in descriptor buffer at the
+ * specified line; this value is previously obtained using SET_LABEL
+ * macro near the line that will be used as reference (unsigned int).
+ * For LOAD command, the value represents the offset field (in words).
+ *
+ * Return: 0 in case of success, a negative error code if it fails
+ */
+#define PATCH_LOAD(program, line, new_ref) \
+ rta_patch_load(program, line, new_ref)
+
+/**
+ * PATCH_STORE - Auxiliary command to resolve self referential code
+ * @program: buffer to be updated (struct program *)
+ * @line: position in descriptor buffer where the update will be done; this
+ * value is previously retained in program flow using a reference near
+ * the sequence to be modified.
+ * @new_ref: updated value that will be inserted in descriptor buffer at the
+ * specified line; this value is previously obtained using SET_LABEL
+ * macro near the line that will be used as reference (unsigned int).
+ * For STORE command, the value represents the offset field (in words).
+ *
+ * Return: 0 in case of success, a negative error code if it fails
+ */
+#define PATCH_STORE(program, line, new_ref) \
+ rta_patch_store(program, line, new_ref)
+
+/**
+ * PATCH_HDR - Auxiliary command to resolve self referential code
+ * @program: buffer to be updated (struct program *)
+ * @line: position in descriptor buffer where the update will be done; this
+ * value is previously retained in program flow using a reference near
+ * the sequence to be modified.
+ * @new_ref: updated value that will be inserted in descriptor buffer at the
+ * specified line; this value is previously obtained using SET_LABEL
+ * macro near the line that will be used as reference (unsigned int).
+ * For HEADER command, the value represents the start index field.
+ *
+ * Return: 0 in case of success, a negative error code if it fails
+ */
+#define PATCH_HDR(program, line, new_ref) \
+ rta_patch_header(program, line, new_ref)
+
+/**
+ * PATCH_RAW - Auxiliary command to resolve self referential code
+ * @program: buffer to be updated (struct program *)
+ * @line: position in descriptor buffer where the update will be done; this
+ * value is previously retained in program flow using a reference near
+ * the sequence to be modified.
+ * @mask: mask to be used for applying the new value (unsigned int). The mask
+ * selects which bits from the provided @new_val are taken into
+ * consideration when overwriting the existing value.
+ * @new_val: updated value that will be masked using the provided mask value
+ * and inserted in descriptor buffer at the specified line.
+ *
+ * Return: 0 in case of success, a negative error code if it fails
+ */
+#define PATCH_RAW(program, line, mask, new_val) \
+ rta_patch_raw(program, line, mask, new_val)
+
+#endif /* __RTA_RTA_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/fifo_load_store_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/fifo_load_store_cmd.h
new file mode 100644
index 00000000..79a48da2
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/fifo_load_store_cmd.h
@@ -0,0 +1,346 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_FIFO_LOAD_STORE_CMD_H__
+#define __RTA_FIFO_LOAD_STORE_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static const uint32_t fifo_load_table[][2] = {
+/*1*/ { PKA0, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_A0 },
+ { PKA1, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_A1 },
+ { PKA2, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_A2 },
+ { PKA3, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_A3 },
+ { PKB0, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_B0 },
+ { PKB1, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_B1 },
+ { PKB2, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_B2 },
+ { PKB3, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_B3 },
+ { PKA, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_A },
+ { PKB, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_B },
+ { PKN, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_PK_N },
+ { SKIP, FIFOLD_CLASS_SKIP },
+ { MSG1, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_MSG },
+ { MSG2, FIFOLD_CLASS_CLASS2 | FIFOLD_TYPE_MSG },
+ { MSGOUTSNOOP, FIFOLD_CLASS_BOTH | FIFOLD_TYPE_MSG1OUT2 },
+ { MSGINSNOOP, FIFOLD_CLASS_BOTH | FIFOLD_TYPE_MSG },
+ { IV1, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_IV },
+ { IV2, FIFOLD_CLASS_CLASS2 | FIFOLD_TYPE_IV },
+ { AAD1, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_AAD },
+ { ICV1, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_ICV },
+ { ICV2, FIFOLD_CLASS_CLASS2 | FIFOLD_TYPE_ICV },
+ { BIT_DATA, FIFOLD_TYPE_BITDATA },
+/*23*/ { IFIFO, FIFOLD_CLASS_CLASS1 | FIFOLD_TYPE_NOINFOFIFO }
+};
+
+/*
+ * Allowed FIFO_LOAD input data types for each SEC Era.
+ * Values represent the number of entries from fifo_load_table[] that are
+ * supported.
+ */
+static const unsigned int fifo_load_table_sz[] = {22, 22, 23, 23,
+ 23, 23, 23, 23};
+
+static inline int
+rta_fifo_load(struct program *program, uint32_t src,
+ uint64_t loc, uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = 0;
+ uint32_t ext_length = 0, val = 0;
+ int ret = -EINVAL;
+ bool is_seq_cmd = false;
+ unsigned int start_pc = program->current_pc;
+
+ /* write command type field */
+ if (flags & SEQ) {
+ opcode = CMD_SEQ_FIFO_LOAD;
+ is_seq_cmd = true;
+ } else {
+ opcode = CMD_FIFO_LOAD;
+ }
+
+ /* Parameters checking */
+ if (is_seq_cmd) {
+ if ((flags & IMMED) || (flags & SGF)) {
+ pr_err("SEQ FIFO LOAD: Invalid command\n");
+ goto err;
+ }
+ if ((rta_sec_era <= RTA_SEC_ERA_5) && (flags & AIDF)) {
+ pr_err("SEQ FIFO LOAD: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+ if ((flags & VLF) && ((flags & EXT) || (length >> 16))) {
+ pr_err("SEQ FIFO LOAD: Invalid usage of VLF\n");
+ goto err;
+ }
+ } else {
+ if (src == SKIP) {
+ pr_err("FIFO LOAD: Invalid src\n");
+ goto err;
+ }
+ if ((flags & AIDF) || (flags & VLF)) {
+ pr_err("FIFO LOAD: Invalid command\n");
+ goto err;
+ }
+ if ((flags & IMMED) && (flags & SGF)) {
+ pr_err("FIFO LOAD: Invalid usage of SGF and IMM\n");
+ goto err;
+ }
+ if ((flags & IMMED) && ((flags & EXT) || (length >> 16))) {
+ pr_err("FIFO LOAD: Invalid usage of EXT and IMM\n");
+ goto err;
+ }
+ }
+
+ /* write input data type field */
+ ret = __rta_map_opcode(src, fifo_load_table,
+ fifo_load_table_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("FIFO LOAD: Source value is not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ opcode |= val;
+
+ if (flags & CLASS1)
+ opcode |= FIFOLD_CLASS_CLASS1;
+ if (flags & CLASS2)
+ opcode |= FIFOLD_CLASS_CLASS2;
+ if (flags & BOTH)
+ opcode |= FIFOLD_CLASS_BOTH;
+
+ /* write fields: SGF|VLF, IMM, [LC1, LC2, F1] */
+ if (flags & FLUSH1)
+ opcode |= FIFOLD_TYPE_FLUSH1;
+ if (flags & LAST1)
+ opcode |= FIFOLD_TYPE_LAST1;
+ if (flags & LAST2)
+ opcode |= FIFOLD_TYPE_LAST2;
+ if (!is_seq_cmd) {
+ if (flags & SGF)
+ opcode |= FIFOLDST_SGF;
+ if (flags & IMMED)
+ opcode |= FIFOLD_IMM;
+ } else {
+ if (flags & VLF)
+ opcode |= FIFOLDST_VLF;
+ if (flags & AIDF)
+ opcode |= FIFOLD_AIDF;
+ }
+
+ /*
+ * Verify if extended length is required. In case of BITDATA, calculate
+ * number of full bytes and additional valid bits.
+ */
+ if ((flags & EXT) || (length >> 16)) {
+ opcode |= FIFOLDST_EXT;
+ if (src == BIT_DATA) {
+ ext_length = (length / 8);
+ length = (length % 8);
+ } else {
+ ext_length = length;
+ length = 0;
+ }
+ }
+ opcode |= (uint16_t) length;
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ /* write pointer or immediate data field */
+ if (flags & IMMED)
+ __rta_inline_data(program, loc, flags & __COPY_MASK, length);
+ else if (!is_seq_cmd)
+ __rta_out64(program, program->ps, loc);
+
+ /* write extended length field */
+ if (opcode & FIFOLDST_EXT)
+ __rta_out32(program, ext_length);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+static const uint32_t fifo_store_table[][2] = {
+/*1*/ { PKA0, FIFOST_TYPE_PKHA_A0 },
+ { PKA1, FIFOST_TYPE_PKHA_A1 },
+ { PKA2, FIFOST_TYPE_PKHA_A2 },
+ { PKA3, FIFOST_TYPE_PKHA_A3 },
+ { PKB0, FIFOST_TYPE_PKHA_B0 },
+ { PKB1, FIFOST_TYPE_PKHA_B1 },
+ { PKB2, FIFOST_TYPE_PKHA_B2 },
+ { PKB3, FIFOST_TYPE_PKHA_B3 },
+ { PKA, FIFOST_TYPE_PKHA_A },
+ { PKB, FIFOST_TYPE_PKHA_B },
+ { PKN, FIFOST_TYPE_PKHA_N },
+ { PKE, FIFOST_TYPE_PKHA_E_JKEK },
+ { RNG, FIFOST_TYPE_RNGSTORE },
+ { RNGOFIFO, FIFOST_TYPE_RNGFIFO },
+ { AFHA_SBOX, FIFOST_TYPE_AF_SBOX_JKEK },
+ { MDHA_SPLIT_KEY, FIFOST_CLASS_CLASS2KEY | FIFOST_TYPE_SPLIT_KEK },
+ { MSG, FIFOST_TYPE_MESSAGE_DATA },
+ { KEY1, FIFOST_CLASS_CLASS1KEY | FIFOST_TYPE_KEY_KEK },
+ { KEY2, FIFOST_CLASS_CLASS2KEY | FIFOST_TYPE_KEY_KEK },
+ { OFIFO, FIFOST_TYPE_OUTFIFO_KEK},
+ { SKIP, FIFOST_TYPE_SKIP },
+/*22*/ { METADATA, FIFOST_TYPE_METADATA},
+ { MSG_CKSUM, FIFOST_TYPE_MESSAGE_DATA2 }
+};
+
+/*
+ * Allowed FIFO_STORE output data types for each SEC Era.
+ * Values represent the number of entries from fifo_store_table[] that are
+ * supported.
+ */
+static const unsigned int fifo_store_table_sz[] = {21, 21, 21, 21,
+ 22, 22, 22, 23};
+
+static inline int
+rta_fifo_store(struct program *program, uint32_t src,
+ uint32_t encrypt_flags, uint64_t dst,
+ uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = 0;
+ uint32_t val = 0;
+ int ret = -EINVAL;
+ bool is_seq_cmd = false;
+ unsigned int start_pc = program->current_pc;
+
+ /* write command type field */
+ if (flags & SEQ) {
+ opcode = CMD_SEQ_FIFO_STORE;
+ is_seq_cmd = true;
+ } else {
+ opcode = CMD_FIFO_STORE;
+ }
+
+ /* Parameter checking */
+ if (is_seq_cmd) {
+ if ((flags & VLF) && ((length >> 16) || (flags & EXT))) {
+ pr_err("SEQ FIFO STORE: Invalid usage of VLF\n");
+ goto err;
+ }
+ if (dst) {
+ pr_err("SEQ FIFO STORE: Invalid command\n");
+ goto err;
+ }
+ if ((src == METADATA) && (flags & (CONT | EXT))) {
+ pr_err("SEQ FIFO STORE: Invalid flags\n");
+ goto err;
+ }
+ } else {
+ if (((src == RNGOFIFO) && ((dst) || (flags & EXT))) ||
+ (src == METADATA)) {
+ pr_err("FIFO STORE: Invalid destination\n");
+ goto err;
+ }
+ }
+ if ((rta_sec_era == RTA_SEC_ERA_7) && (src == AFHA_SBOX)) {
+ pr_err("FIFO STORE: AFHA S-box not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ /* write output data type field */
+ ret = __rta_map_opcode(src, fifo_store_table,
+ fifo_store_table_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("FIFO STORE: Source type not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ opcode |= val;
+
+ if (encrypt_flags & TK)
+ opcode |= (0x1 << FIFOST_TYPE_SHIFT);
+ if (encrypt_flags & EKT) {
+ if (rta_sec_era == RTA_SEC_ERA_1) {
+ pr_err("FIFO STORE: AES-CCM source types not supported\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ opcode |= (0x10 << FIFOST_TYPE_SHIFT);
+ opcode &= (uint32_t)~(0x20 << FIFOST_TYPE_SHIFT);
+ }
+
+ /* write flags fields */
+ if (flags & CONT)
+ opcode |= FIFOST_CONT;
+ if ((flags & VLF) && (is_seq_cmd))
+ opcode |= FIFOLDST_VLF;
+ if ((flags & SGF) && (!is_seq_cmd))
+ opcode |= FIFOLDST_SGF;
+ if (flags & CLASS1)
+ opcode |= FIFOST_CLASS_CLASS1KEY;
+ if (flags & CLASS2)
+ opcode |= FIFOST_CLASS_CLASS2KEY;
+ if (flags & BOTH)
+ opcode |= FIFOST_CLASS_BOTH;
+
+ /* Verify if extended length is required */
+ if ((length >> 16) || (flags & EXT))
+ opcode |= FIFOLDST_EXT;
+ else
+ opcode |= (uint16_t) length;
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ /* write pointer field */
+ if ((!is_seq_cmd) && (dst))
+ __rta_out64(program, program->ps, dst);
+
+ /* write extended length field */
+ if (opcode & FIFOLDST_EXT)
+ __rta_out32(program, length);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_FIFO_LOAD_STORE_CMD_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/header_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/header_cmd.h
new file mode 100644
index 00000000..c2a27a2d
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/header_cmd.h
@@ -0,0 +1,251 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_HEADER_CMD_H__
+#define __RTA_HEADER_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+/* Allowed job header flags for each SEC Era. */
+static const uint32_t job_header_flags[] = {
+ DNR | TD | MTD | SHR | REO,
+ DNR | TD | MTD | SHR | REO | RSMS,
+ DNR | TD | MTD | SHR | REO | RSMS,
+ DNR | TD | MTD | SHR | REO | RSMS,
+ DNR | TD | MTD | SHR | REO | RSMS | EXT,
+ DNR | TD | MTD | SHR | REO | RSMS | EXT,
+ DNR | TD | MTD | SHR | REO | RSMS | EXT,
+ DNR | TD | MTD | SHR | REO | EXT
+};
+
+/* Allowed shared header flags for each SEC Era. */
+static const uint32_t shr_header_flags[] = {
+ DNR | SC | PD,
+ DNR | SC | PD | CIF,
+ DNR | SC | PD | CIF,
+ DNR | SC | PD | CIF | RIF,
+ DNR | SC | PD | CIF | RIF,
+ DNR | SC | PD | CIF | RIF,
+ DNR | SC | PD | CIF | RIF,
+ DNR | SC | PD | CIF | RIF
+};
+
+static inline int
+rta_shr_header(struct program *program,
+ enum rta_share_type share,
+ unsigned int start_idx,
+ uint32_t flags)
+{
+ uint32_t opcode = CMD_SHARED_DESC_HDR;
+ unsigned int start_pc = program->current_pc;
+
+ if (flags & ~shr_header_flags[rta_sec_era]) {
+ pr_err("SHR_DESC: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ switch (share) {
+ case SHR_ALWAYS:
+ opcode |= HDR_SHARE_ALWAYS;
+ break;
+ case SHR_SERIAL:
+ opcode |= HDR_SHARE_SERIAL;
+ break;
+ case SHR_NEVER:
+ /*
+ * opcode |= HDR_SHARE_NEVER;
+ * HDR_SHARE_NEVER is 0
+ */
+ break;
+ case SHR_WAIT:
+ opcode |= HDR_SHARE_WAIT;
+ break;
+ default:
+ pr_err("SHR_DESC: SHARE VALUE is not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ opcode |= HDR_ONE;
+ opcode |= (start_idx << HDR_START_IDX_SHIFT) & HDR_START_IDX_MASK;
+
+ if (flags & DNR)
+ opcode |= HDR_DNR;
+ if (flags & CIF)
+ opcode |= HDR_CLEAR_IFIFO;
+ if (flags & SC)
+ opcode |= HDR_SAVECTX;
+ if (flags & PD)
+ opcode |= HDR_PROP_DNR;
+ if (flags & RIF)
+ opcode |= HDR_RIF;
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ if (program->current_instruction == 1)
+ program->shrhdr = program->buffer;
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return -EINVAL;
+}
+
+static inline int
+rta_job_header(struct program *program,
+ enum rta_share_type share,
+ unsigned int start_idx,
+ uint64_t shr_desc, uint32_t flags,
+ uint32_t ext_flags)
+{
+ uint32_t opcode = CMD_DESC_HDR;
+ uint32_t hdr_ext = 0;
+ unsigned int start_pc = program->current_pc;
+
+ if (flags & ~job_header_flags[rta_sec_era]) {
+ pr_err("JOB_DESC: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ switch (share) {
+ case SHR_ALWAYS:
+ opcode |= HDR_SHARE_ALWAYS;
+ break;
+ case SHR_SERIAL:
+ opcode |= HDR_SHARE_SERIAL;
+ break;
+ case SHR_NEVER:
+ /*
+ * opcode |= HDR_SHARE_NEVER;
+ * HDR_SHARE_NEVER is 0
+ */
+ break;
+ case SHR_WAIT:
+ opcode |= HDR_SHARE_WAIT;
+ break;
+ case SHR_DEFER:
+ opcode |= HDR_SHARE_DEFER;
+ break;
+ default:
+ pr_err("JOB_DESC: SHARE VALUE is not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ if ((flags & TD) && (flags & REO)) {
+ pr_err("JOB_DESC: REO flag not supported for trusted descriptors. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ if ((rta_sec_era < RTA_SEC_ERA_7) && (flags & MTD) && !(flags & TD)) {
+ pr_err("JOB_DESC: Trying to MTD a descriptor that is not a TD. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ if ((flags & EXT) && !(flags & SHR) && (start_idx < 2)) {
+ pr_err("JOB_DESC: Start index must be >= 2 in case of no SHR and EXT. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ opcode |= HDR_ONE;
+ opcode |= ((start_idx << HDR_START_IDX_SHIFT) & HDR_START_IDX_MASK);
+
+ if (flags & EXT) {
+ opcode |= HDR_EXT;
+
+ if (ext_flags & DSV) {
+ hdr_ext |= HDR_EXT_DSEL_VALID;
+ hdr_ext |= ext_flags & DSEL_MASK;
+ }
+
+ if (ext_flags & FTD) {
+ if (rta_sec_era <= RTA_SEC_ERA_5) {
+ pr_err("JOB_DESC: Fake trusted descriptor not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ hdr_ext |= HDR_EXT_FTD;
+ }
+ }
+ if (flags & RSMS)
+ opcode |= HDR_RSLS;
+ if (flags & DNR)
+ opcode |= HDR_DNR;
+ if (flags & TD)
+ opcode |= HDR_TRUSTED;
+ if (flags & MTD)
+ opcode |= HDR_MAKE_TRUSTED;
+ if (flags & REO)
+ opcode |= HDR_REVERSE;
+ if (flags & SHR)
+ opcode |= HDR_SHARED;
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ if (program->current_instruction == 1) {
+ program->jobhdr = program->buffer;
+
+ if (opcode & HDR_SHARED)
+ __rta_out64(program, program->ps, shr_desc);
+ }
+
+ if (flags & EXT)
+ __rta_out32(program, hdr_ext);
+
+ /* Note: descriptor length is set in program_finalize routine */
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return -EINVAL;
+}
+
+#endif /* __RTA_HEADER_CMD_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/jump_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/jump_cmd.h
new file mode 100644
index 00000000..2c85beec
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/jump_cmd.h
@@ -0,0 +1,207 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_JUMP_CMD_H__
+#define __RTA_JUMP_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static const uint32_t jump_test_cond[][2] = {
+ { NIFP, JUMP_COND_NIFP },
+ { NIP, JUMP_COND_NIP },
+ { NOP, JUMP_COND_NOP },
+ { NCP, JUMP_COND_NCP },
+ { CALM, JUMP_COND_CALM },
+ { SELF, JUMP_COND_SELF },
+ { SHRD, JUMP_COND_SHRD },
+ { JQP, JUMP_COND_JQP },
+ { MATH_Z, JUMP_COND_MATH_Z },
+ { MATH_N, JUMP_COND_MATH_N },
+ { MATH_NV, JUMP_COND_MATH_NV },
+ { MATH_C, JUMP_COND_MATH_C },
+ { PK_0, JUMP_COND_PK_0 },
+ { PK_GCD_1, JUMP_COND_PK_GCD_1 },
+ { PK_PRIME, JUMP_COND_PK_PRIME },
+ { CLASS1, JUMP_CLASS_CLASS1 },
+ { CLASS2, JUMP_CLASS_CLASS2 },
+ { BOTH, JUMP_CLASS_BOTH }
+};
+
+static const uint32_t jump_test_math_cond[][2] = {
+ { MATH_Z, JUMP_COND_MATH_Z },
+ { MATH_N, JUMP_COND_MATH_N },
+ { MATH_NV, JUMP_COND_MATH_NV },
+ { MATH_C, JUMP_COND_MATH_C }
+};
+
+static const uint32_t jump_src_dst[][2] = {
+ { MATH0, JUMP_SRC_DST_MATH0 },
+ { MATH1, JUMP_SRC_DST_MATH1 },
+ { MATH2, JUMP_SRC_DST_MATH2 },
+ { MATH3, JUMP_SRC_DST_MATH3 },
+ { DPOVRD, JUMP_SRC_DST_DPOVRD },
+ { SEQINSZ, JUMP_SRC_DST_SEQINLEN },
+ { SEQOUTSZ, JUMP_SRC_DST_SEQOUTLEN },
+ { VSEQINSZ, JUMP_SRC_DST_VARSEQINLEN },
+ { VSEQOUTSZ, JUMP_SRC_DST_VARSEQOUTLEN }
+};
+
+static inline int
+rta_jump(struct program *program, uint64_t address,
+ enum rta_jump_type jump_type,
+ enum rta_jump_cond test_type,
+ uint32_t test_condition, uint32_t src_dst)
+{
+ uint32_t opcode = CMD_JUMP;
+ unsigned int start_pc = program->current_pc;
+ int ret = -EINVAL;
+
+ if (((jump_type == GOSUB) || (jump_type == RETURN)) &&
+ (rta_sec_era < RTA_SEC_ERA_4)) {
+ pr_err("JUMP: Jump type not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ if (((jump_type == LOCAL_JUMP_INC) || (jump_type == LOCAL_JUMP_DEC)) &&
+ (rta_sec_era <= RTA_SEC_ERA_5)) {
+ pr_err("JUMP_INCDEC: Jump type not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ switch (jump_type) {
+ case (LOCAL_JUMP):
+ /*
+ * opcode |= JUMP_TYPE_LOCAL;
+ * JUMP_TYPE_LOCAL is 0
+ */
+ break;
+ case (HALT):
+ opcode |= JUMP_TYPE_HALT;
+ break;
+ case (HALT_STATUS):
+ opcode |= JUMP_TYPE_HALT_USER;
+ break;
+ case (FAR_JUMP):
+ opcode |= JUMP_TYPE_NONLOCAL;
+ break;
+ case (GOSUB):
+ opcode |= JUMP_TYPE_GOSUB;
+ break;
+ case (RETURN):
+ opcode |= JUMP_TYPE_RETURN;
+ break;
+ case (LOCAL_JUMP_INC):
+ opcode |= JUMP_TYPE_LOCAL_INC;
+ break;
+ case (LOCAL_JUMP_DEC):
+ opcode |= JUMP_TYPE_LOCAL_DEC;
+ break;
+ default:
+ pr_err("JUMP: Invalid jump type. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ switch (test_type) {
+ case (ALL_TRUE):
+ /*
+ * opcode |= JUMP_TEST_ALL;
+ * JUMP_TEST_ALL is 0
+ */
+ break;
+ case (ALL_FALSE):
+ opcode |= JUMP_TEST_INVALL;
+ break;
+ case (ANY_TRUE):
+ opcode |= JUMP_TEST_ANY;
+ break;
+ case (ANY_FALSE):
+ opcode |= JUMP_TEST_INVANY;
+ break;
+ default:
+ pr_err("JUMP: test type not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ /* write test condition field */
+ if ((jump_type != LOCAL_JUMP_INC) && (jump_type != LOCAL_JUMP_DEC)) {
+ __rta_map_flags(test_condition, jump_test_cond,
+ ARRAY_SIZE(jump_test_cond), &opcode);
+ } else {
+ uint32_t val = 0;
+
+ ret = __rta_map_opcode(src_dst, jump_src_dst,
+ ARRAY_SIZE(jump_src_dst), &val);
+ if (ret < 0) {
+ pr_err("JUMP_INCDEC: SRC_DST not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+
+ __rta_map_flags(test_condition, jump_test_math_cond,
+ ARRAY_SIZE(jump_test_math_cond), &opcode);
+ }
+
+ /* write local offset field for local jumps and user-defined halt */
+ if ((jump_type == LOCAL_JUMP) || (jump_type == LOCAL_JUMP_INC) ||
+ (jump_type == LOCAL_JUMP_DEC) || (jump_type == GOSUB) ||
+ (jump_type == HALT_STATUS))
+ opcode |= (uint32_t)(address & JUMP_OFFSET_MASK);
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ if (jump_type == FAR_JUMP)
+ __rta_out64(program, program->ps, address);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_JUMP_CMD_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/key_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/key_cmd.h
new file mode 100644
index 00000000..9bef1155
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/key_cmd.h
@@ -0,0 +1,222 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_KEY_CMD_H__
+#define __RTA_KEY_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+/* Allowed encryption flags for each SEC Era */
+static const uint32_t key_enc_flags[] = {
+ ENC,
+ ENC | NWB | EKT | TK,
+ ENC | NWB | EKT | TK,
+ ENC | NWB | EKT | TK,
+ ENC | NWB | EKT | TK,
+ ENC | NWB | EKT | TK,
+ ENC | NWB | EKT | TK | PTS,
+ ENC | NWB | EKT | TK | PTS
+};
+
+static inline int
+rta_key(struct program *program, uint32_t key_dst,
+ uint32_t encrypt_flags, uint64_t src, uint32_t length,
+ uint32_t flags)
+{
+ uint32_t opcode = 0;
+ bool is_seq_cmd = false;
+ unsigned int start_pc = program->current_pc;
+
+ if (encrypt_flags & ~key_enc_flags[rta_sec_era]) {
+ pr_err("KEY: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ /* write cmd type */
+ if (flags & SEQ) {
+ opcode = CMD_SEQ_KEY;
+ is_seq_cmd = true;
+ } else {
+ opcode = CMD_KEY;
+ }
+
+ /* check parameters */
+ if (is_seq_cmd) {
+ if ((flags & IMMED) || (flags & SGF)) {
+ pr_err("SEQKEY: Invalid flag. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ if ((rta_sec_era <= RTA_SEC_ERA_5) &&
+ ((flags & VLF) || (flags & AIDF))) {
+ pr_err("SEQKEY: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+ } else {
+ if ((flags & AIDF) || (flags & VLF)) {
+ pr_err("KEY: Invalid flag. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ if ((flags & SGF) && (flags & IMMED)) {
+ pr_err("KEY: Invalid flag. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ }
+
+ if ((encrypt_flags & PTS) &&
+ ((encrypt_flags & ENC) || (encrypt_flags & NWB) ||
+ (key_dst == PKE))) {
+ pr_err("KEY: Invalid flag / destination. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ if (key_dst == AFHA_SBOX) {
+ if (rta_sec_era == RTA_SEC_ERA_7) {
+ pr_err("KEY: AFHA S-box not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ if (flags & IMMED) {
+ pr_err("KEY: Invalid flag. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ /*
+ * Sbox data loaded into the ARC-4 processor must be exactly
+ * 258 bytes long, or else a data sequence error is generated.
+ */
+ if (length != 258) {
+ pr_err("KEY: Invalid length. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ }
+
+ /* write key destination and class fields */
+ switch (key_dst) {
+ case (KEY1):
+ opcode |= KEY_DEST_CLASS1;
+ break;
+ case (KEY2):
+ opcode |= KEY_DEST_CLASS2;
+ break;
+ case (PKE):
+ opcode |= KEY_DEST_CLASS1 | KEY_DEST_PKHA_E;
+ break;
+ case (AFHA_SBOX):
+ opcode |= KEY_DEST_CLASS1 | KEY_DEST_AFHA_SBOX;
+ break;
+ case (MDHA_SPLIT_KEY):
+ opcode |= KEY_DEST_CLASS2 | KEY_DEST_MDHA_SPLIT;
+ break;
+ default:
+ pr_err("KEY: Invalid destination. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ /* write key length */
+ length &= KEY_LENGTH_MASK;
+ opcode |= length;
+
+ /* write key command specific flags */
+ if (encrypt_flags & ENC) {
+ /* Encrypted (black) keys must be padded to 8 bytes (CCM) or
+ * 16 bytes (ECB) depending on EKT bit. AES-CCM encrypted keys
+ * (EKT = 1) have 6-byte nonce and 6-byte MAC after padding.
+ */
+ opcode |= KEY_ENC;
+ if (encrypt_flags & EKT) {
+ opcode |= KEY_EKT;
+ length = ALIGN(length, 8);
+ length += 12;
+ } else {
+ length = ALIGN(length, 16);
+ }
+ if (encrypt_flags & TK)
+ opcode |= KEY_TK;
+ }
+ if (encrypt_flags & NWB)
+ opcode |= KEY_NWB;
+ if (encrypt_flags & PTS)
+ opcode |= KEY_PTS;
+
+ /* write general command flags */
+ if (!is_seq_cmd) {
+ if (flags & IMMED)
+ opcode |= KEY_IMM;
+ if (flags & SGF)
+ opcode |= KEY_SGF;
+ } else {
+ if (flags & AIDF)
+ opcode |= KEY_AIDF;
+ if (flags & VLF)
+ opcode |= KEY_VLF;
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ if (flags & IMMED)
+ __rta_inline_data(program, src, flags & __COPY_MASK, length);
+ else
+ __rta_out64(program, program->ps, src);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return -EINVAL;
+}
+
+#endif /* __RTA_KEY_CMD_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/load_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/load_cmd.h
new file mode 100644
index 00000000..1db55b33
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/load_cmd.h
@@ -0,0 +1,335 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_LOAD_CMD_H__
+#define __RTA_LOAD_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+/* Allowed length and offset masks for each SEC Era in case DST = DCTRL */
+static const uint32_t load_len_mask_allowed[] = {
+ 0x000000ee,
+ 0x000000fe,
+ 0x000000fe,
+ 0x000000fe,
+ 0x000000fe,
+ 0x000000fe,
+ 0x000000fe,
+ 0x000000fe
+};
+
+static const uint32_t load_off_mask_allowed[] = {
+ 0x0000000f,
+ 0x000000ff,
+ 0x000000ff,
+ 0x000000ff,
+ 0x000000ff,
+ 0x000000ff,
+ 0x000000ff,
+ 0x000000ff
+};
+
+#define IMM_MUST 0
+#define IMM_CAN 1
+#define IMM_NO 2
+#define IMM_DSNM 3 /* it doesn't matter the src type */
+
+enum e_lenoff {
+ LENOF_03,
+ LENOF_4,
+ LENOF_48,
+ LENOF_448,
+ LENOF_18,
+ LENOF_32,
+ LENOF_24,
+ LENOF_16,
+ LENOF_8,
+ LENOF_128,
+ LENOF_256,
+ DSNM /* it doesn't matter the length/offset values */
+};
+
+struct load_map {
+ uint32_t dst;
+ uint32_t dst_opcode;
+ enum e_lenoff len_off;
+ uint8_t imm_src;
+
+};
+
+static const struct load_map load_dst[] = {
+/*1*/ { KEY1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_KEYSZ_REG,
+ LENOF_4, IMM_MUST },
+ { KEY2SZ, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_KEYSZ_REG,
+ LENOF_4, IMM_MUST },
+ { DATA1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_DATASZ_REG,
+ LENOF_448, IMM_MUST },
+ { DATA2SZ, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_DATASZ_REG,
+ LENOF_448, IMM_MUST },
+ { ICV1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_ICVSZ_REG,
+ LENOF_4, IMM_MUST },
+ { ICV2SZ, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_ICVSZ_REG,
+ LENOF_4, IMM_MUST },
+ { CCTRL, LDST_CLASS_IND_CCB | LDST_SRCDST_WORD_CHACTRL,
+ LENOF_4, IMM_MUST },
+ { DCTRL, LDST_CLASS_DECO | LDST_IMM | LDST_SRCDST_WORD_DECOCTRL,
+ DSNM, IMM_DSNM },
+ { ICTRL, LDST_CLASS_IND_CCB | LDST_SRCDST_WORD_IRQCTRL,
+ LENOF_4, IMM_MUST },
+ { DPOVRD, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_PCLOVRD,
+ LENOF_4, IMM_MUST },
+ { CLRW, LDST_CLASS_IND_CCB | LDST_SRCDST_WORD_CLRW,
+ LENOF_4, IMM_MUST },
+ { AAD1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_DECO_AAD_SZ,
+ LENOF_4, IMM_MUST },
+ { IV1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_CLASS1_IV_SZ,
+ LENOF_4, IMM_MUST },
+ { ALTDS1, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_ALTDS_CLASS1,
+ LENOF_448, IMM_MUST },
+ { PKASZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_A_SZ,
+ LENOF_4, IMM_MUST, },
+ { PKBSZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_B_SZ,
+ LENOF_4, IMM_MUST },
+ { PKNSZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_N_SZ,
+ LENOF_4, IMM_MUST },
+ { PKESZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_E_SZ,
+ LENOF_4, IMM_MUST },
+ { NFIFO, LDST_CLASS_IND_CCB | LDST_SRCDST_WORD_INFO_FIFO,
+ LENOF_48, IMM_MUST },
+ { IFIFO, LDST_SRCDST_BYTE_INFIFO, LENOF_18, IMM_MUST },
+ { OFIFO, LDST_SRCDST_BYTE_OUTFIFO, LENOF_18, IMM_MUST },
+ { MATH0, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH0,
+ LENOF_32, IMM_CAN },
+ { MATH1, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH1,
+ LENOF_24, IMM_CAN },
+ { MATH2, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH2,
+ LENOF_16, IMM_CAN },
+ { MATH3, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH3,
+ LENOF_8, IMM_CAN },
+ { CONTEXT1, LDST_CLASS_1_CCB | LDST_SRCDST_BYTE_CONTEXT,
+ LENOF_128, IMM_CAN },
+ { CONTEXT2, LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_CONTEXT,
+ LENOF_128, IMM_CAN },
+ { KEY1, LDST_CLASS_1_CCB | LDST_SRCDST_BYTE_KEY,
+ LENOF_32, IMM_CAN },
+ { KEY2, LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_KEY,
+ LENOF_32, IMM_CAN },
+ { DESCBUF, LDST_CLASS_DECO | LDST_SRCDST_WORD_DESCBUF,
+ LENOF_256, IMM_NO },
+ { DPID, LDST_CLASS_DECO | LDST_SRCDST_WORD_PID,
+ LENOF_448, IMM_MUST },
+/*32*/ { IDFNS, LDST_SRCDST_WORD_IFNSR, LENOF_18, IMM_MUST },
+ { ODFNS, LDST_SRCDST_WORD_OFNSR, LENOF_18, IMM_MUST },
+ { ALTSOURCE, LDST_SRCDST_BYTE_ALTSOURCE, LENOF_18, IMM_MUST },
+/*35*/ { NFIFO_SZL, LDST_SRCDST_WORD_INFO_FIFO_SZL, LENOF_48, IMM_MUST },
+ { NFIFO_SZM, LDST_SRCDST_WORD_INFO_FIFO_SZM, LENOF_03, IMM_MUST },
+ { NFIFO_L, LDST_SRCDST_WORD_INFO_FIFO_L, LENOF_48, IMM_MUST },
+ { NFIFO_M, LDST_SRCDST_WORD_INFO_FIFO_M, LENOF_03, IMM_MUST },
+ { SZL, LDST_SRCDST_WORD_SZL, LENOF_48, IMM_MUST },
+/*40*/ { SZM, LDST_SRCDST_WORD_SZM, LENOF_03, IMM_MUST }
+};
+
+/*
+ * Allowed LOAD destinations for each SEC Era.
+ * Values represent the number of entries from load_dst[] that are supported.
+ */
+static const unsigned int load_dst_sz[] = { 31, 34, 34, 40, 40, 40, 40, 40 };
+
+static inline int
+load_check_len_offset(int pos, uint32_t length, uint32_t offset)
+{
+ if ((load_dst[pos].dst == DCTRL) &&
+ ((length & ~load_len_mask_allowed[rta_sec_era]) ||
+ (offset & ~load_off_mask_allowed[rta_sec_era])))
+ goto err;
+
+ switch (load_dst[pos].len_off) {
+ case (LENOF_03):
+ if ((length > 3) || (offset))
+ goto err;
+ break;
+ case (LENOF_4):
+ if ((length != 4) || (offset != 0))
+ goto err;
+ break;
+ case (LENOF_48):
+ if (!(((length == 4) && (offset == 0)) ||
+ ((length == 8) && (offset == 0))))
+ goto err;
+ break;
+ case (LENOF_448):
+ if (!(((length == 4) && (offset == 0)) ||
+ ((length == 4) && (offset == 4)) ||
+ ((length == 8) && (offset == 0))))
+ goto err;
+ break;
+ case (LENOF_18):
+ if ((length < 1) || (length > 8) || (offset != 0))
+ goto err;
+ break;
+ case (LENOF_32):
+ if ((length > 32) || (offset > 32) || ((offset + length) > 32))
+ goto err;
+ break;
+ case (LENOF_24):
+ if ((length > 24) || (offset > 24) || ((offset + length) > 24))
+ goto err;
+ break;
+ case (LENOF_16):
+ if ((length > 16) || (offset > 16) || ((offset + length) > 16))
+ goto err;
+ break;
+ case (LENOF_8):
+ if ((length > 8) || (offset > 8) || ((offset + length) > 8))
+ goto err;
+ break;
+ case (LENOF_128):
+ if ((length > 128) || (offset > 128) ||
+ ((offset + length) > 128))
+ goto err;
+ break;
+ case (LENOF_256):
+ if ((length < 1) || (length > 256) || ((length + offset) > 256))
+ goto err;
+ break;
+ case (DSNM):
+ break;
+ default:
+ goto err;
+ }
+
+ return 0;
+err:
+ return -EINVAL;
+}
+
+static inline int
+rta_load(struct program *program, uint64_t src, uint64_t dst,
+ uint32_t offset, uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = 0;
+ int pos = -1, ret = -EINVAL;
+ unsigned int start_pc = program->current_pc, i;
+
+ if (flags & SEQ)
+ opcode = CMD_SEQ_LOAD;
+ else
+ opcode = CMD_LOAD;
+
+ if ((length & 0xffffff00) || (offset & 0xffffff00)) {
+ pr_err("LOAD: Bad length/offset passed. Should be 8 bits\n");
+ goto err;
+ }
+
+ if (flags & SGF)
+ opcode |= LDST_SGF;
+ if (flags & VLF)
+ opcode |= LDST_VLF;
+
+ /* check load destination, length and offset and source type */
+ for (i = 0; i < load_dst_sz[rta_sec_era]; i++)
+ if (dst == load_dst[i].dst) {
+ pos = (int)i;
+ break;
+ }
+ if (-1 == pos) {
+ pr_err("LOAD: Invalid dst. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ if (flags & IMMED) {
+ if (load_dst[pos].imm_src == IMM_NO) {
+ pr_err("LOAD: Invalid source type. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ opcode |= LDST_IMM;
+ } else if (load_dst[pos].imm_src == IMM_MUST) {
+ pr_err("LOAD IMM: Invalid source type. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ ret = load_check_len_offset(pos, length, offset);
+ if (ret < 0) {
+ pr_err("LOAD: Invalid length/offset. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ opcode |= load_dst[pos].dst_opcode;
+
+ /* DESC BUFFER: length / offset values are specified in 4-byte words */
+ if (dst == DESCBUF) {
+ opcode |= (length >> 2);
+ opcode |= ((offset >> 2) << LDST_OFFSET_SHIFT);
+ } else {
+ opcode |= length;
+ opcode |= (offset << LDST_OFFSET_SHIFT);
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ /* DECO CONTROL: skip writing pointer of imm data */
+ if (dst == DCTRL)
+ return (int)start_pc;
+
+ /*
+ * For data copy, 3 possible ways to specify how to copy data:
+ * - IMMED & !COPY: copy data directly from src( max 8 bytes)
+ * - IMMED & COPY: copy data imm from the location specified by user
+ * - !IMMED and is not SEQ cmd: copy the address
+ */
+ if (flags & IMMED)
+ __rta_inline_data(program, src, flags & __COPY_MASK, length);
+ else if (!(flags & SEQ))
+ __rta_out64(program, program->ps, src);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_LOAD_CMD_H__*/
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/math_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/math_cmd.h
new file mode 100644
index 00000000..a9b9091d
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/math_cmd.h
@@ -0,0 +1,402 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_MATH_CMD_H__
+#define __RTA_MATH_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static const uint32_t math_op1[][2] = {
+/*1*/ { MATH0, MATH_SRC0_REG0 },
+ { MATH1, MATH_SRC0_REG1 },
+ { MATH2, MATH_SRC0_REG2 },
+ { MATH3, MATH_SRC0_REG3 },
+ { SEQINSZ, MATH_SRC0_SEQINLEN },
+ { SEQOUTSZ, MATH_SRC0_SEQOUTLEN },
+ { VSEQINSZ, MATH_SRC0_VARSEQINLEN },
+ { VSEQOUTSZ, MATH_SRC0_VARSEQOUTLEN },
+ { ZERO, MATH_SRC0_ZERO },
+/*10*/ { NONE, 0 }, /* dummy value */
+ { DPOVRD, MATH_SRC0_DPOVRD },
+ { ONE, MATH_SRC0_ONE }
+};
+
+/*
+ * Allowed MATH op1 sources for each SEC Era.
+ * Values represent the number of entries from math_op1[] that are supported.
+ */
+static const unsigned int math_op1_sz[] = {10, 10, 12, 12, 12, 12, 12, 12};
+
+static const uint32_t math_op2[][2] = {
+/*1*/ { MATH0, MATH_SRC1_REG0 },
+ { MATH1, MATH_SRC1_REG1 },
+ { MATH2, MATH_SRC1_REG2 },
+ { MATH3, MATH_SRC1_REG3 },
+ { ABD, MATH_SRC1_INFIFO },
+ { OFIFO, MATH_SRC1_OUTFIFO },
+ { ONE, MATH_SRC1_ONE },
+/*8*/ { NONE, 0 }, /* dummy value */
+ { JOBSRC, MATH_SRC1_JOBSOURCE },
+ { DPOVRD, MATH_SRC1_DPOVRD },
+ { VSEQINSZ, MATH_SRC1_VARSEQINLEN },
+ { VSEQOUTSZ, MATH_SRC1_VARSEQOUTLEN },
+/*13*/ { ZERO, MATH_SRC1_ZERO }
+};
+
+/*
+ * Allowed MATH op2 sources for each SEC Era.
+ * Values represent the number of entries from math_op2[] that are supported.
+ */
+static const unsigned int math_op2_sz[] = {8, 9, 13, 13, 13, 13, 13, 13};
+
+static const uint32_t math_result[][2] = {
+/*1*/ { MATH0, MATH_DEST_REG0 },
+ { MATH1, MATH_DEST_REG1 },
+ { MATH2, MATH_DEST_REG2 },
+ { MATH3, MATH_DEST_REG3 },
+ { SEQINSZ, MATH_DEST_SEQINLEN },
+ { SEQOUTSZ, MATH_DEST_SEQOUTLEN },
+ { VSEQINSZ, MATH_DEST_VARSEQINLEN },
+ { VSEQOUTSZ, MATH_DEST_VARSEQOUTLEN },
+/*9*/ { NONE, MATH_DEST_NONE },
+ { DPOVRD, MATH_DEST_DPOVRD }
+};
+
+/*
+ * Allowed MATH result destinations for each SEC Era.
+ * Values represent the number of entries from math_result[] that are
+ * supported.
+ */
+static const unsigned int math_result_sz[] = {9, 9, 10, 10, 10, 10, 10, 10};
+
+static inline int
+rta_math(struct program *program, uint64_t operand1,
+ uint32_t op, uint64_t operand2, uint32_t result,
+ int length, uint32_t options)
+{
+ uint32_t opcode = CMD_MATH;
+ uint32_t val = 0;
+ int ret = -EINVAL;
+ unsigned int start_pc = program->current_pc;
+
+ if (((op == MATH_FUN_BSWAP) && (rta_sec_era < RTA_SEC_ERA_4)) ||
+ ((op == MATH_FUN_ZBYT) && (rta_sec_era < RTA_SEC_ERA_2))) {
+ pr_err("MATH: operation not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era), program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ if (options & SWP) {
+ if (rta_sec_era < RTA_SEC_ERA_7) {
+ pr_err("MATH: operation not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era), program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ if ((options & IFB) ||
+ (!(options & IMMED) && !(options & IMMED2)) ||
+ ((options & IMMED) && (options & IMMED2))) {
+ pr_err("MATH: SWP - invalid configuration. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ }
+
+ /*
+ * SHLD operation is different from others and we
+ * assume that we can have _NONE as first operand
+ * or _SEQINSZ as second operand
+ */
+ if ((op != MATH_FUN_SHLD) && ((operand1 == NONE) ||
+ (operand2 == SEQINSZ))) {
+ pr_err("MATH: Invalid operand. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ /*
+ * We first check if it is unary operation. In that
+ * case second operand must be _NONE
+ */
+ if (((op == MATH_FUN_ZBYT) || (op == MATH_FUN_BSWAP)) &&
+ (operand2 != NONE)) {
+ pr_err("MATH: Invalid operand2. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ /* Write first operand field */
+ if (options & IMMED) {
+ opcode |= MATH_SRC0_IMM;
+ } else {
+ ret = __rta_map_opcode((uint32_t)operand1, math_op1,
+ math_op1_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("MATH: operand1 not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+ }
+
+ /* Write second operand field */
+ if (options & IMMED2) {
+ opcode |= MATH_SRC1_IMM;
+ } else {
+ ret = __rta_map_opcode((uint32_t)operand2, math_op2,
+ math_op2_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("MATH: operand2 not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+ }
+
+ /* Write result field */
+ ret = __rta_map_opcode(result, math_result, math_result_sz[rta_sec_era],
+ &val);
+ if (ret < 0) {
+ pr_err("MATH: result not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+
+ /*
+ * as we encode operations with their "real" values, we do not
+ * to translate but we do need to validate the value
+ */
+ switch (op) {
+ /*Binary operators */
+ case (MATH_FUN_ADD):
+ case (MATH_FUN_ADDC):
+ case (MATH_FUN_SUB):
+ case (MATH_FUN_SUBB):
+ case (MATH_FUN_OR):
+ case (MATH_FUN_AND):
+ case (MATH_FUN_XOR):
+ case (MATH_FUN_LSHIFT):
+ case (MATH_FUN_RSHIFT):
+ case (MATH_FUN_SHLD):
+ /* Unary operators */
+ case (MATH_FUN_ZBYT):
+ case (MATH_FUN_BSWAP):
+ opcode |= op;
+ break;
+ default:
+ pr_err("MATH: operator is not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ opcode |= (options & ~(IMMED | IMMED2));
+
+ /* Verify length */
+ switch (length) {
+ case (1):
+ opcode |= MATH_LEN_1BYTE;
+ break;
+ case (2):
+ opcode |= MATH_LEN_2BYTE;
+ break;
+ case (4):
+ opcode |= MATH_LEN_4BYTE;
+ break;
+ case (8):
+ opcode |= MATH_LEN_8BYTE;
+ break;
+ default:
+ pr_err("MATH: length is not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ /* Write immediate value */
+ if ((options & IMMED) && !(options & IMMED2)) {
+ __rta_out64(program, (length > 4) && !(options & IFB),
+ operand1);
+ } else if ((options & IMMED2) && !(options & IMMED)) {
+ __rta_out64(program, (length > 4) && !(options & IFB),
+ operand2);
+ } else if ((options & IMMED) && (options & IMMED2)) {
+ __rta_out32(program, lower_32_bits(operand1));
+ __rta_out32(program, lower_32_bits(operand2));
+ }
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+static inline int
+rta_mathi(struct program *program, uint64_t operand,
+ uint32_t op, uint8_t imm, uint32_t result,
+ int length, uint32_t options)
+{
+ uint32_t opcode = CMD_MATHI;
+ uint32_t val = 0;
+ int ret = -EINVAL;
+ unsigned int start_pc = program->current_pc;
+
+ if (rta_sec_era < RTA_SEC_ERA_6) {
+ pr_err("MATHI: Command not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era), program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ if (((op == MATH_FUN_FBYT) && (options & SSEL))) {
+ pr_err("MATHI: Illegal combination - FBYT and SSEL. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ if ((options & SWP) && (rta_sec_era < RTA_SEC_ERA_7)) {
+ pr_err("MATHI: SWP not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era), program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ /* Write first operand field */
+ if (!(options & SSEL))
+ ret = __rta_map_opcode((uint32_t)operand, math_op1,
+ math_op1_sz[rta_sec_era], &val);
+ else
+ ret = __rta_map_opcode((uint32_t)operand, math_op2,
+ math_op2_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("MATHI: operand not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ if (!(options & SSEL))
+ opcode |= val;
+ else
+ opcode |= (val << (MATHI_SRC1_SHIFT - MATH_SRC1_SHIFT));
+
+ /* Write second operand field */
+ opcode |= (imm << MATHI_IMM_SHIFT);
+
+ /* Write result field */
+ ret = __rta_map_opcode(result, math_result, math_result_sz[rta_sec_era],
+ &val);
+ if (ret < 0) {
+ pr_err("MATHI: result not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ opcode |= (val << (MATHI_DEST_SHIFT - MATH_DEST_SHIFT));
+
+ /*
+ * as we encode operations with their "real" values, we do not have to
+ * translate but we do need to validate the value
+ */
+ switch (op) {
+ case (MATH_FUN_ADD):
+ case (MATH_FUN_ADDC):
+ case (MATH_FUN_SUB):
+ case (MATH_FUN_SUBB):
+ case (MATH_FUN_OR):
+ case (MATH_FUN_AND):
+ case (MATH_FUN_XOR):
+ case (MATH_FUN_LSHIFT):
+ case (MATH_FUN_RSHIFT):
+ case (MATH_FUN_FBYT):
+ opcode |= op;
+ break;
+ default:
+ pr_err("MATHI: operator not supported. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ opcode |= options;
+
+ /* Verify length */
+ switch (length) {
+ case (1):
+ opcode |= MATH_LEN_1BYTE;
+ break;
+ case (2):
+ opcode |= MATH_LEN_2BYTE;
+ break;
+ case (4):
+ opcode |= MATH_LEN_4BYTE;
+ break;
+ case (8):
+ opcode |= MATH_LEN_8BYTE;
+ break;
+ default:
+ pr_err("MATHI: length %d not supported. SEC PC: %d; Instr: %d\n",
+ length, program->current_pc,
+ program->current_instruction);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_MATH_CMD_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/move_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/move_cmd.h
new file mode 100644
index 00000000..10d2e193
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/move_cmd.h
@@ -0,0 +1,445 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_MOVE_CMD_H__
+#define __RTA_MOVE_CMD_H__
+
+#define MOVE_SET_AUX_SRC 0x01
+#define MOVE_SET_AUX_DST 0x02
+#define MOVE_SET_AUX_LS 0x03
+#define MOVE_SET_LEN_16b 0x04
+
+#define MOVE_SET_AUX_MATH 0x10
+#define MOVE_SET_AUX_MATH_SRC (MOVE_SET_AUX_SRC | MOVE_SET_AUX_MATH)
+#define MOVE_SET_AUX_MATH_DST (MOVE_SET_AUX_DST | MOVE_SET_AUX_MATH)
+
+#define MASK_16b 0xFF
+
+/* MOVE command type */
+#define __MOVE 1
+#define __MOVEB 2
+#define __MOVEDW 3
+
+extern enum rta_sec_era rta_sec_era;
+
+static const uint32_t move_src_table[][2] = {
+/*1*/ { CONTEXT1, MOVE_SRC_CLASS1CTX },
+ { CONTEXT2, MOVE_SRC_CLASS2CTX },
+ { OFIFO, MOVE_SRC_OUTFIFO },
+ { DESCBUF, MOVE_SRC_DESCBUF },
+ { MATH0, MOVE_SRC_MATH0 },
+ { MATH1, MOVE_SRC_MATH1 },
+ { MATH2, MOVE_SRC_MATH2 },
+ { MATH3, MOVE_SRC_MATH3 },
+/*9*/ { IFIFOABD, MOVE_SRC_INFIFO },
+ { IFIFOAB1, MOVE_SRC_INFIFO_CL | MOVE_AUX_LS },
+ { IFIFOAB2, MOVE_SRC_INFIFO_CL },
+/*12*/ { ABD, MOVE_SRC_INFIFO_NO_NFIFO },
+ { AB1, MOVE_SRC_INFIFO_NO_NFIFO | MOVE_AUX_LS },
+ { AB2, MOVE_SRC_INFIFO_NO_NFIFO | MOVE_AUX_MS }
+};
+
+/* Allowed MOVE / MOVE_LEN sources for each SEC Era.
+ * Values represent the number of entries from move_src_table[] that are
+ * supported.
+ */
+static const unsigned int move_src_table_sz[] = {9, 11, 14, 14, 14, 14, 14, 14};
+
+static const uint32_t move_dst_table[][2] = {
+/*1*/ { CONTEXT1, MOVE_DEST_CLASS1CTX },
+ { CONTEXT2, MOVE_DEST_CLASS2CTX },
+ { OFIFO, MOVE_DEST_OUTFIFO },
+ { DESCBUF, MOVE_DEST_DESCBUF },
+ { MATH0, MOVE_DEST_MATH0 },
+ { MATH1, MOVE_DEST_MATH1 },
+ { MATH2, MOVE_DEST_MATH2 },
+ { MATH3, MOVE_DEST_MATH3 },
+ { IFIFOAB1, MOVE_DEST_CLASS1INFIFO },
+ { IFIFOAB2, MOVE_DEST_CLASS2INFIFO },
+ { PKA, MOVE_DEST_PK_A },
+ { KEY1, MOVE_DEST_CLASS1KEY },
+ { KEY2, MOVE_DEST_CLASS2KEY },
+/*14*/ { IFIFO, MOVE_DEST_INFIFO },
+/*15*/ { ALTSOURCE, MOVE_DEST_ALTSOURCE}
+};
+
+/* Allowed MOVE / MOVE_LEN destinations for each SEC Era.
+ * Values represent the number of entries from move_dst_table[] that are
+ * supported.
+ */
+static const
+unsigned int move_dst_table_sz[] = {13, 14, 14, 15, 15, 15, 15, 15};
+
+static inline int
+set_move_offset(struct program *program __maybe_unused,
+ uint64_t src, uint16_t src_offset,
+ uint64_t dst, uint16_t dst_offset,
+ uint16_t *offset, uint16_t *opt);
+
+static inline int
+math_offset(uint16_t offset);
+
+static inline int
+rta_move(struct program *program, int cmd_type, uint64_t src,
+ uint16_t src_offset, uint64_t dst,
+ uint16_t dst_offset, uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = 0;
+ uint16_t offset = 0, opt = 0;
+ uint32_t val = 0;
+ int ret = -EINVAL;
+ bool is_move_len_cmd = false;
+ unsigned int start_pc = program->current_pc;
+
+ if ((rta_sec_era < RTA_SEC_ERA_7) && (cmd_type != __MOVE)) {
+ pr_err("MOVE: MOVEB / MOVEDW not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era), program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ /* write command type */
+ if (cmd_type == __MOVEB) {
+ opcode = CMD_MOVEB;
+ } else if (cmd_type == __MOVEDW) {
+ opcode = CMD_MOVEDW;
+ } else if (!(flags & IMMED)) {
+ if (rta_sec_era < RTA_SEC_ERA_3) {
+ pr_err("MOVE: MOVE_LEN not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era), program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ if ((length != MATH0) && (length != MATH1) &&
+ (length != MATH2) && (length != MATH3)) {
+ pr_err("MOVE: MOVE_LEN length must be MATH[0-3]. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ opcode = CMD_MOVE_LEN;
+ is_move_len_cmd = true;
+ } else {
+ opcode = CMD_MOVE;
+ }
+
+ /* write offset first, to check for invalid combinations or incorrect
+ * offset values sooner; decide which offset should be here
+ * (src or dst)
+ */
+ ret = set_move_offset(program, src, src_offset, dst, dst_offset,
+ &offset, &opt);
+ if (ret < 0)
+ goto err;
+
+ opcode |= (offset << MOVE_OFFSET_SHIFT) & MOVE_OFFSET_MASK;
+
+ /* set AUX field if required */
+ if (opt == MOVE_SET_AUX_SRC) {
+ opcode |= ((src_offset / 16) << MOVE_AUX_SHIFT) & MOVE_AUX_MASK;
+ } else if (opt == MOVE_SET_AUX_DST) {
+ opcode |= ((dst_offset / 16) << MOVE_AUX_SHIFT) & MOVE_AUX_MASK;
+ } else if (opt == MOVE_SET_AUX_LS) {
+ opcode |= MOVE_AUX_LS;
+ } else if (opt & MOVE_SET_AUX_MATH) {
+ if (opt & MOVE_SET_AUX_SRC)
+ offset = src_offset;
+ else
+ offset = dst_offset;
+
+ if (rta_sec_era < RTA_SEC_ERA_6) {
+ if (offset)
+ pr_debug("MOVE: Offset not supported by SEC Era %d. SEC PC: %d; Instr: %d\n",
+ USER_SEC_ERA(rta_sec_era),
+ program->current_pc,
+ program->current_instruction);
+ /* nothing to do for offset = 0 */
+ } else {
+ ret = math_offset(offset);
+ if (ret < 0) {
+ pr_err("MOVE: Invalid offset in MATH register. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ opcode |= (uint32_t)ret;
+ }
+ }
+
+ /* write source field */
+ ret = __rta_map_opcode((uint32_t)src, move_src_table,
+ move_src_table_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("MOVE: Invalid SRC. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+
+ /* write destination field */
+ ret = __rta_map_opcode((uint32_t)dst, move_dst_table,
+ move_dst_table_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("MOVE: Invalid DST. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+
+ /* write flags */
+ if (flags & (FLUSH1 | FLUSH2))
+ opcode |= MOVE_AUX_MS;
+ if (flags & (LAST2 | LAST1))
+ opcode |= MOVE_AUX_LS;
+ if (flags & WAITCOMP)
+ opcode |= MOVE_WAITCOMP;
+
+ if (!is_move_len_cmd) {
+ /* write length */
+ if (opt == MOVE_SET_LEN_16b)
+ opcode |= (length & (MOVE_OFFSET_MASK | MOVE_LEN_MASK));
+ else
+ opcode |= (length & MOVE_LEN_MASK);
+ } else {
+ /* write mrsel */
+ switch (length) {
+ case (MATH0):
+ /*
+ * opcode |= MOVELEN_MRSEL_MATH0;
+ * MOVELEN_MRSEL_MATH0 is 0
+ */
+ break;
+ case (MATH1):
+ opcode |= MOVELEN_MRSEL_MATH1;
+ break;
+ case (MATH2):
+ opcode |= MOVELEN_MRSEL_MATH2;
+ break;
+ case (MATH3):
+ opcode |= MOVELEN_MRSEL_MATH3;
+ break;
+ }
+
+ /* write size */
+ if (rta_sec_era >= RTA_SEC_ERA_7) {
+ if (flags & SIZE_WORD)
+ opcode |= MOVELEN_SIZE_WORD;
+ else if (flags & SIZE_BYTE)
+ opcode |= MOVELEN_SIZE_BYTE;
+ else if (flags & SIZE_DWORD)
+ opcode |= MOVELEN_SIZE_DWORD;
+ }
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+static inline int
+set_move_offset(struct program *program __maybe_unused,
+ uint64_t src, uint16_t src_offset,
+ uint64_t dst, uint16_t dst_offset,
+ uint16_t *offset, uint16_t *opt)
+{
+ switch (src) {
+ case (CONTEXT1):
+ case (CONTEXT2):
+ if (dst == DESCBUF) {
+ *opt = MOVE_SET_AUX_SRC;
+ *offset = dst_offset;
+ } else if ((dst == KEY1) || (dst == KEY2)) {
+ if ((src_offset) && (dst_offset)) {
+ pr_err("MOVE: Bad offset. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ if (dst_offset) {
+ *opt = MOVE_SET_AUX_LS;
+ *offset = dst_offset;
+ } else {
+ *offset = src_offset;
+ }
+ } else {
+ if ((dst == MATH0) || (dst == MATH1) ||
+ (dst == MATH2) || (dst == MATH3)) {
+ *opt = MOVE_SET_AUX_MATH_DST;
+ } else if (((dst == OFIFO) || (dst == ALTSOURCE)) &&
+ (src_offset % 4)) {
+ pr_err("MOVE: Bad offset alignment. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ *offset = src_offset;
+ }
+ break;
+
+ case (OFIFO):
+ if (dst == OFIFO) {
+ pr_err("MOVE: Invalid DST. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ if (((dst == IFIFOAB1) || (dst == IFIFOAB2) ||
+ (dst == IFIFO) || (dst == PKA)) &&
+ (src_offset || dst_offset)) {
+ pr_err("MOVE: Offset should be zero. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ *offset = dst_offset;
+ break;
+
+ case (DESCBUF):
+ if ((dst == CONTEXT1) || (dst == CONTEXT2)) {
+ *opt = MOVE_SET_AUX_DST;
+ } else if ((dst == MATH0) || (dst == MATH1) ||
+ (dst == MATH2) || (dst == MATH3)) {
+ *opt = MOVE_SET_AUX_MATH_DST;
+ } else if (dst == DESCBUF) {
+ pr_err("MOVE: Invalid DST. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ } else if (((dst == OFIFO) || (dst == ALTSOURCE)) &&
+ (src_offset % 4)) {
+ pr_err("MOVE: Invalid offset alignment. SEC PC: %d; Instr %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+
+ *offset = src_offset;
+ break;
+
+ case (MATH0):
+ case (MATH1):
+ case (MATH2):
+ case (MATH3):
+ if ((dst == OFIFO) || (dst == ALTSOURCE)) {
+ if (src_offset % 4) {
+ pr_err("MOVE: Bad offset alignment. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ *offset = src_offset;
+ } else if ((dst == IFIFOAB1) || (dst == IFIFOAB2) ||
+ (dst == IFIFO) || (dst == PKA)) {
+ *offset = src_offset;
+ } else {
+ *offset = dst_offset;
+
+ /*
+ * This condition is basically the negation of:
+ * dst in { CONTEXT[1-2], MATH[0-3] }
+ */
+ if ((dst != KEY1) && (dst != KEY2))
+ *opt = MOVE_SET_AUX_MATH_SRC;
+ }
+ break;
+
+ case (IFIFOABD):
+ case (IFIFOAB1):
+ case (IFIFOAB2):
+ case (ABD):
+ case (AB1):
+ case (AB2):
+ if ((dst == IFIFOAB1) || (dst == IFIFOAB2) ||
+ (dst == IFIFO) || (dst == PKA) || (dst == ALTSOURCE)) {
+ pr_err("MOVE: Bad DST. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ } else {
+ if (dst == OFIFO) {
+ *opt = MOVE_SET_LEN_16b;
+ } else {
+ if (dst_offset % 4) {
+ pr_err("MOVE: Bad offset alignment. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ *offset = dst_offset;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+ err:
+ return -EINVAL;
+}
+
+static inline int
+math_offset(uint16_t offset)
+{
+ switch (offset) {
+ case 0:
+ return 0;
+ case 4:
+ return MOVE_AUX_LS;
+ case 6:
+ return MOVE_AUX_MS;
+ case 7:
+ return MOVE_AUX_LS | MOVE_AUX_MS;
+ }
+
+ return -EINVAL;
+}
+
+#endif /* __RTA_MOVE_CMD_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/nfifo_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/nfifo_cmd.h
new file mode 100644
index 00000000..30be0825
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/nfifo_cmd.h
@@ -0,0 +1,196 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_NFIFO_CMD_H__
+#define __RTA_NFIFO_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static const uint32_t nfifo_src[][2] = {
+/*1*/ { IFIFO, NFIFOENTRY_STYPE_DFIFO },
+ { OFIFO, NFIFOENTRY_STYPE_OFIFO },
+ { PAD, NFIFOENTRY_STYPE_PAD },
+/*4*/ { MSGOUTSNOOP, NFIFOENTRY_STYPE_SNOOP | NFIFOENTRY_DEST_BOTH },
+/*5*/ { ALTSOURCE, NFIFOENTRY_STYPE_ALTSOURCE },
+ { OFIFO_SYNC, NFIFOENTRY_STYPE_OFIFO_SYNC },
+/*7*/ { MSGOUTSNOOP_ALT, NFIFOENTRY_STYPE_SNOOP_ALT | NFIFOENTRY_DEST_BOTH }
+};
+
+/*
+ * Allowed NFIFO LOAD sources for each SEC Era.
+ * Values represent the number of entries from nfifo_src[] that are supported.
+ */
+static const unsigned int nfifo_src_sz[] = {4, 5, 5, 5, 5, 5, 5, 7};
+
+static const uint32_t nfifo_data[][2] = {
+ { MSG, NFIFOENTRY_DTYPE_MSG },
+ { MSG1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_MSG },
+ { MSG2, NFIFOENTRY_DEST_CLASS2 | NFIFOENTRY_DTYPE_MSG },
+ { IV1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_IV },
+ { IV2, NFIFOENTRY_DEST_CLASS2 | NFIFOENTRY_DTYPE_IV },
+ { ICV1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_ICV },
+ { ICV2, NFIFOENTRY_DEST_CLASS2 | NFIFOENTRY_DTYPE_ICV },
+ { SAD1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_SAD },
+ { AAD1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_AAD },
+ { AAD2, NFIFOENTRY_DEST_CLASS2 | NFIFOENTRY_DTYPE_AAD },
+ { AFHA_SBOX, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_SBOX },
+ { SKIP, NFIFOENTRY_DTYPE_SKIP },
+ { PKE, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_E },
+ { PKN, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_N },
+ { PKA, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_A },
+ { PKA0, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_A0 },
+ { PKA1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_A1 },
+ { PKA2, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_A2 },
+ { PKA3, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_A3 },
+ { PKB, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_B },
+ { PKB0, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_B0 },
+ { PKB1, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_B1 },
+ { PKB2, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_B2 },
+ { PKB3, NFIFOENTRY_DEST_CLASS1 | NFIFOENTRY_DTYPE_PK_B3 },
+ { AB1, NFIFOENTRY_DEST_CLASS1 },
+ { AB2, NFIFOENTRY_DEST_CLASS2 },
+ { ABD, NFIFOENTRY_DEST_DECO }
+};
+
+static const uint32_t nfifo_flags[][2] = {
+/*1*/ { LAST1, NFIFOENTRY_LC1 },
+ { LAST2, NFIFOENTRY_LC2 },
+ { FLUSH1, NFIFOENTRY_FC1 },
+ { BP, NFIFOENTRY_BND },
+ { PAD_ZERO, NFIFOENTRY_PTYPE_ZEROS },
+ { PAD_NONZERO, NFIFOENTRY_PTYPE_RND_NOZEROS },
+ { PAD_INCREMENT, NFIFOENTRY_PTYPE_INCREMENT },
+ { PAD_RANDOM, NFIFOENTRY_PTYPE_RND },
+ { PAD_ZERO_N1, NFIFOENTRY_PTYPE_ZEROS_NZ },
+ { PAD_NONZERO_0, NFIFOENTRY_PTYPE_RND_NZ_LZ },
+ { PAD_N1, NFIFOENTRY_PTYPE_N },
+/*12*/ { PAD_NONZERO_N, NFIFOENTRY_PTYPE_RND_NZ_N },
+ { FLUSH2, NFIFOENTRY_FC2 },
+ { OC, NFIFOENTRY_OC }
+};
+
+/*
+ * Allowed NFIFO LOAD flags for each SEC Era.
+ * Values represent the number of entries from nfifo_flags[] that are supported.
+ */
+static const unsigned int nfifo_flags_sz[] = {12, 14, 14, 14, 14, 14, 14, 14};
+
+static const uint32_t nfifo_pad_flags[][2] = {
+ { BM, NFIFOENTRY_BM },
+ { PS, NFIFOENTRY_PS },
+ { PR, NFIFOENTRY_PR }
+};
+
+/*
+ * Allowed NFIFO LOAD pad flags for each SEC Era.
+ * Values represent the number of entries from nfifo_pad_flags[] that are
+ * supported.
+ */
+static const unsigned int nfifo_pad_flags_sz[] = {2, 2, 2, 2, 3, 3, 3, 3};
+
+static inline int
+rta_nfifo_load(struct program *program, uint32_t src,
+ uint32_t data, uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = 0, val;
+ int ret = -EINVAL;
+ uint32_t load_cmd = CMD_LOAD | LDST_IMM | LDST_CLASS_IND_CCB |
+ LDST_SRCDST_WORD_INFO_FIFO;
+ unsigned int start_pc = program->current_pc;
+
+ if ((data == AFHA_SBOX) && (rta_sec_era == RTA_SEC_ERA_7)) {
+ pr_err("NFIFO: AFHA S-box not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+
+ /* write source field */
+ ret = __rta_map_opcode(src, nfifo_src, nfifo_src_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("NFIFO: Invalid SRC. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+
+ /* write type field */
+ ret = __rta_map_opcode(data, nfifo_data, ARRAY_SIZE(nfifo_data), &val);
+ if (ret < 0) {
+ pr_err("NFIFO: Invalid data. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+
+ /* write DL field */
+ if (!(flags & EXT)) {
+ opcode |= length & NFIFOENTRY_DLEN_MASK;
+ load_cmd |= 4;
+ } else {
+ load_cmd |= 8;
+ }
+
+ /* write flags */
+ __rta_map_flags(flags, nfifo_flags, nfifo_flags_sz[rta_sec_era],
+ &opcode);
+
+ /* in case of padding, check the destination */
+ if (src == PAD)
+ __rta_map_flags(flags, nfifo_pad_flags,
+ nfifo_pad_flags_sz[rta_sec_era], &opcode);
+
+ /* write LOAD command first */
+ __rta_out32(program, load_cmd);
+ __rta_out32(program, opcode);
+
+ if (flags & EXT)
+ __rta_out32(program, length & NFIFOENTRY_DLEN_MASK);
+
+ program->current_instruction++;
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_NFIFO_CMD_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/operation_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/operation_cmd.h
new file mode 100644
index 00000000..5e88fb46
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/operation_cmd.h
@@ -0,0 +1,599 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_OPERATION_CMD_H__
+#define __RTA_OPERATION_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static inline int
+__rta_alg_aai_aes(uint16_t aai)
+{
+ uint16_t aes_mode = aai & OP_ALG_AESA_MODE_MASK;
+
+ if (aai & OP_ALG_AAI_C2K) {
+ if (rta_sec_era < RTA_SEC_ERA_5)
+ return -1;
+ if ((aes_mode != OP_ALG_AAI_CCM) &&
+ (aes_mode != OP_ALG_AAI_GCM))
+ return -EINVAL;
+ }
+
+ switch (aes_mode) {
+ case OP_ALG_AAI_CBC_CMAC:
+ case OP_ALG_AAI_CTR_CMAC_LTE:
+ case OP_ALG_AAI_CTR_CMAC:
+ if (rta_sec_era < RTA_SEC_ERA_2)
+ return -EINVAL;
+ /* no break */
+ case OP_ALG_AAI_CTR:
+ case OP_ALG_AAI_CBC:
+ case OP_ALG_AAI_ECB:
+ case OP_ALG_AAI_OFB:
+ case OP_ALG_AAI_CFB:
+ case OP_ALG_AAI_XTS:
+ case OP_ALG_AAI_CMAC:
+ case OP_ALG_AAI_XCBC_MAC:
+ case OP_ALG_AAI_CCM:
+ case OP_ALG_AAI_GCM:
+ case OP_ALG_AAI_CBC_XCBCMAC:
+ case OP_ALG_AAI_CTR_XCBCMAC:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_alg_aai_des(uint16_t aai)
+{
+ uint16_t aai_code = (uint16_t)(aai & ~OP_ALG_AAI_CHECKODD);
+
+ switch (aai_code) {
+ case OP_ALG_AAI_CBC:
+ case OP_ALG_AAI_ECB:
+ case OP_ALG_AAI_CFB:
+ case OP_ALG_AAI_OFB:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_alg_aai_md5(uint16_t aai)
+{
+ switch (aai) {
+ case OP_ALG_AAI_HMAC:
+ if (rta_sec_era < RTA_SEC_ERA_2)
+ return -EINVAL;
+ /* no break */
+ case OP_ALG_AAI_SMAC:
+ case OP_ALG_AAI_HASH:
+ case OP_ALG_AAI_HMAC_PRECOMP:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_alg_aai_sha(uint16_t aai)
+{
+ switch (aai) {
+ case OP_ALG_AAI_HMAC:
+ if (rta_sec_era < RTA_SEC_ERA_2)
+ return -EINVAL;
+ /* no break */
+ case OP_ALG_AAI_HASH:
+ case OP_ALG_AAI_HMAC_PRECOMP:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_alg_aai_rng(uint16_t aai)
+{
+ uint16_t rng_mode = aai & OP_ALG_RNG_MODE_MASK;
+ uint16_t rng_sh = aai & OP_ALG_AAI_RNG4_SH_MASK;
+
+ switch (rng_mode) {
+ case OP_ALG_AAI_RNG:
+ case OP_ALG_AAI_RNG_NZB:
+ case OP_ALG_AAI_RNG_OBP:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* State Handle bits are valid only for SEC Era >= 5 */
+ if ((rta_sec_era < RTA_SEC_ERA_5) && rng_sh)
+ return -EINVAL;
+
+ /* PS, AI, SK bits are also valid only for SEC Era >= 5 */
+ if ((rta_sec_era < RTA_SEC_ERA_5) && (aai &
+ (OP_ALG_AAI_RNG4_PS | OP_ALG_AAI_RNG4_AI | OP_ALG_AAI_RNG4_SK)))
+ return -EINVAL;
+
+ switch (rng_sh) {
+ case OP_ALG_AAI_RNG4_SH_0:
+ case OP_ALG_AAI_RNG4_SH_1:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_alg_aai_crc(uint16_t aai)
+{
+ uint16_t aai_code = aai & OP_ALG_CRC_POLY_MASK;
+
+ switch (aai_code) {
+ case OP_ALG_AAI_802:
+ case OP_ALG_AAI_3385:
+ case OP_ALG_AAI_CUST_POLY:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_alg_aai_kasumi(uint16_t aai)
+{
+ switch (aai) {
+ case OP_ALG_AAI_GSM:
+ case OP_ALG_AAI_EDGE:
+ case OP_ALG_AAI_F8:
+ case OP_ALG_AAI_F9:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_alg_aai_snow_f9(uint16_t aai)
+{
+ if (aai == OP_ALG_AAI_F9)
+ return 0;
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_alg_aai_snow_f8(uint16_t aai)
+{
+ if (aai == OP_ALG_AAI_F8)
+ return 0;
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_alg_aai_zuce(uint16_t aai)
+{
+ if (aai == OP_ALG_AAI_F8)
+ return 0;
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_alg_aai_zuca(uint16_t aai)
+{
+ if (aai == OP_ALG_AAI_F9)
+ return 0;
+
+ return -EINVAL;
+}
+
+struct alg_aai_map {
+ uint32_t chipher_algo;
+ int (*aai_func)(uint16_t);
+ uint32_t class;
+};
+
+static const struct alg_aai_map alg_table[] = {
+/*1*/ { OP_ALG_ALGSEL_AES, __rta_alg_aai_aes, OP_TYPE_CLASS1_ALG },
+ { OP_ALG_ALGSEL_DES, __rta_alg_aai_des, OP_TYPE_CLASS1_ALG },
+ { OP_ALG_ALGSEL_3DES, __rta_alg_aai_des, OP_TYPE_CLASS1_ALG },
+ { OP_ALG_ALGSEL_MD5, __rta_alg_aai_md5, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_SHA1, __rta_alg_aai_md5, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_SHA224, __rta_alg_aai_sha, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_SHA256, __rta_alg_aai_sha, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_SHA384, __rta_alg_aai_sha, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_SHA512, __rta_alg_aai_sha, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_RNG, __rta_alg_aai_rng, OP_TYPE_CLASS1_ALG },
+/*11*/ { OP_ALG_ALGSEL_CRC, __rta_alg_aai_crc, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_ARC4, NULL, OP_TYPE_CLASS1_ALG },
+ { OP_ALG_ALGSEL_SNOW_F8, __rta_alg_aai_snow_f8, OP_TYPE_CLASS1_ALG },
+/*14*/ { OP_ALG_ALGSEL_KASUMI, __rta_alg_aai_kasumi, OP_TYPE_CLASS1_ALG },
+ { OP_ALG_ALGSEL_SNOW_F9, __rta_alg_aai_snow_f9, OP_TYPE_CLASS2_ALG },
+ { OP_ALG_ALGSEL_ZUCE, __rta_alg_aai_zuce, OP_TYPE_CLASS1_ALG },
+/*17*/ { OP_ALG_ALGSEL_ZUCA, __rta_alg_aai_zuca, OP_TYPE_CLASS2_ALG }
+};
+
+/*
+ * Allowed OPERATION algorithms for each SEC Era.
+ * Values represent the number of entries from alg_table[] that are supported.
+ */
+static const unsigned int alg_table_sz[] = {14, 15, 15, 15, 17, 17, 11, 17};
+
+static inline int
+rta_operation(struct program *program, uint32_t cipher_algo,
+ uint16_t aai, uint8_t algo_state,
+ int icv_checking, int enc)
+{
+ uint32_t opcode = CMD_OPERATION;
+ unsigned int i, found = 0;
+ unsigned int start_pc = program->current_pc;
+ int ret;
+
+ for (i = 0; i < alg_table_sz[rta_sec_era]; i++) {
+ if (alg_table[i].chipher_algo == cipher_algo) {
+ opcode |= cipher_algo | alg_table[i].class;
+ /* nothing else to verify */
+ if (alg_table[i].aai_func == NULL) {
+ found = 1;
+ break;
+ }
+
+ aai &= OP_ALG_AAI_MASK;
+
+ ret = (*alg_table[i].aai_func)(aai);
+ if (ret < 0) {
+ pr_err("OPERATION: Bad AAI Type. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ opcode |= aai;
+ found = 1;
+ break;
+ }
+ }
+ if (!found) {
+ pr_err("OPERATION: Invalid Command. SEC Program Line: %d\n",
+ program->current_pc);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ switch (algo_state) {
+ case OP_ALG_AS_UPDATE:
+ case OP_ALG_AS_INIT:
+ case OP_ALG_AS_FINALIZE:
+ case OP_ALG_AS_INITFINAL:
+ opcode |= algo_state;
+ break;
+ default:
+ pr_err("Invalid Operation Command\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ switch (icv_checking) {
+ case ICV_CHECK_DISABLE:
+ /*
+ * opcode |= OP_ALG_ICV_OFF;
+ * OP_ALG_ICV_OFF is 0
+ */
+ break;
+ case ICV_CHECK_ENABLE:
+ opcode |= OP_ALG_ICV_ON;
+ break;
+ default:
+ pr_err("Invalid Operation Command\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ switch (enc) {
+ case DIR_DEC:
+ /*
+ * opcode |= OP_ALG_DECRYPT;
+ * OP_ALG_DECRYPT is 0
+ */
+ break;
+ case DIR_ENC:
+ opcode |= OP_ALG_ENCRYPT;
+ break;
+ default:
+ pr_err("Invalid Operation Command\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ return ret;
+}
+
+/*
+ * OPERATION PKHA routines
+ */
+static inline int
+__rta_pkha_clearmem(uint32_t pkha_op)
+{
+ switch (pkha_op) {
+ case (OP_ALG_PKMODE_CLEARMEM_ALL):
+ case (OP_ALG_PKMODE_CLEARMEM_ABE):
+ case (OP_ALG_PKMODE_CLEARMEM_ABN):
+ case (OP_ALG_PKMODE_CLEARMEM_AB):
+ case (OP_ALG_PKMODE_CLEARMEM_AEN):
+ case (OP_ALG_PKMODE_CLEARMEM_AE):
+ case (OP_ALG_PKMODE_CLEARMEM_AN):
+ case (OP_ALG_PKMODE_CLEARMEM_A):
+ case (OP_ALG_PKMODE_CLEARMEM_BEN):
+ case (OP_ALG_PKMODE_CLEARMEM_BE):
+ case (OP_ALG_PKMODE_CLEARMEM_BN):
+ case (OP_ALG_PKMODE_CLEARMEM_B):
+ case (OP_ALG_PKMODE_CLEARMEM_EN):
+ case (OP_ALG_PKMODE_CLEARMEM_N):
+ case (OP_ALG_PKMODE_CLEARMEM_E):
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_pkha_mod_arithmetic(uint32_t pkha_op)
+{
+ pkha_op &= (uint32_t)~OP_ALG_PKMODE_OUT_A;
+
+ switch (pkha_op) {
+ case (OP_ALG_PKMODE_MOD_ADD):
+ case (OP_ALG_PKMODE_MOD_SUB_AB):
+ case (OP_ALG_PKMODE_MOD_SUB_BA):
+ case (OP_ALG_PKMODE_MOD_MULT):
+ case (OP_ALG_PKMODE_MOD_MULT_IM):
+ case (OP_ALG_PKMODE_MOD_MULT_IM_OM):
+ case (OP_ALG_PKMODE_MOD_EXPO):
+ case (OP_ALG_PKMODE_MOD_EXPO_TEQ):
+ case (OP_ALG_PKMODE_MOD_EXPO_IM):
+ case (OP_ALG_PKMODE_MOD_EXPO_IM_TEQ):
+ case (OP_ALG_PKMODE_MOD_REDUCT):
+ case (OP_ALG_PKMODE_MOD_INV):
+ case (OP_ALG_PKMODE_MOD_MONT_CNST):
+ case (OP_ALG_PKMODE_MOD_CRT_CNST):
+ case (OP_ALG_PKMODE_MOD_GCD):
+ case (OP_ALG_PKMODE_MOD_PRIMALITY):
+ case (OP_ALG_PKMODE_MOD_SML_EXP):
+ case (OP_ALG_PKMODE_F2M_ADD):
+ case (OP_ALG_PKMODE_F2M_MUL):
+ case (OP_ALG_PKMODE_F2M_MUL_IM):
+ case (OP_ALG_PKMODE_F2M_MUL_IM_OM):
+ case (OP_ALG_PKMODE_F2M_EXP):
+ case (OP_ALG_PKMODE_F2M_EXP_TEQ):
+ case (OP_ALG_PKMODE_F2M_AMODN):
+ case (OP_ALG_PKMODE_F2M_INV):
+ case (OP_ALG_PKMODE_F2M_R2):
+ case (OP_ALG_PKMODE_F2M_GCD):
+ case (OP_ALG_PKMODE_F2M_SML_EXP):
+ case (OP_ALG_PKMODE_ECC_F2M_ADD):
+ case (OP_ALG_PKMODE_ECC_F2M_ADD_IM_OM_PROJ):
+ case (OP_ALG_PKMODE_ECC_F2M_DBL):
+ case (OP_ALG_PKMODE_ECC_F2M_DBL_IM_OM_PROJ):
+ case (OP_ALG_PKMODE_ECC_F2M_MUL):
+ case (OP_ALG_PKMODE_ECC_F2M_MUL_TEQ):
+ case (OP_ALG_PKMODE_ECC_F2M_MUL_R2):
+ case (OP_ALG_PKMODE_ECC_F2M_MUL_R2_TEQ):
+ case (OP_ALG_PKMODE_ECC_F2M_MUL_R2_PROJ):
+ case (OP_ALG_PKMODE_ECC_F2M_MUL_R2_PROJ_TEQ):
+ case (OP_ALG_PKMODE_ECC_MOD_ADD):
+ case (OP_ALG_PKMODE_ECC_MOD_ADD_IM_OM_PROJ):
+ case (OP_ALG_PKMODE_ECC_MOD_DBL):
+ case (OP_ALG_PKMODE_ECC_MOD_DBL_IM_OM_PROJ):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL_TEQ):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL_R2):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL_R2_TEQ):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL_R2_PROJ):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL_R2_PROJ_TEQ):
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_pkha_copymem(uint32_t pkha_op)
+{
+ switch (pkha_op) {
+ case (OP_ALG_PKMODE_COPY_NSZ_A0_B0):
+ case (OP_ALG_PKMODE_COPY_NSZ_A0_B1):
+ case (OP_ALG_PKMODE_COPY_NSZ_A0_B2):
+ case (OP_ALG_PKMODE_COPY_NSZ_A0_B3):
+ case (OP_ALG_PKMODE_COPY_NSZ_A1_B0):
+ case (OP_ALG_PKMODE_COPY_NSZ_A1_B1):
+ case (OP_ALG_PKMODE_COPY_NSZ_A1_B2):
+ case (OP_ALG_PKMODE_COPY_NSZ_A1_B3):
+ case (OP_ALG_PKMODE_COPY_NSZ_A2_B0):
+ case (OP_ALG_PKMODE_COPY_NSZ_A2_B1):
+ case (OP_ALG_PKMODE_COPY_NSZ_A2_B2):
+ case (OP_ALG_PKMODE_COPY_NSZ_A2_B3):
+ case (OP_ALG_PKMODE_COPY_NSZ_A3_B0):
+ case (OP_ALG_PKMODE_COPY_NSZ_A3_B1):
+ case (OP_ALG_PKMODE_COPY_NSZ_A3_B2):
+ case (OP_ALG_PKMODE_COPY_NSZ_A3_B3):
+ case (OP_ALG_PKMODE_COPY_NSZ_B0_A0):
+ case (OP_ALG_PKMODE_COPY_NSZ_B0_A1):
+ case (OP_ALG_PKMODE_COPY_NSZ_B0_A2):
+ case (OP_ALG_PKMODE_COPY_NSZ_B0_A3):
+ case (OP_ALG_PKMODE_COPY_NSZ_B1_A0):
+ case (OP_ALG_PKMODE_COPY_NSZ_B1_A1):
+ case (OP_ALG_PKMODE_COPY_NSZ_B1_A2):
+ case (OP_ALG_PKMODE_COPY_NSZ_B1_A3):
+ case (OP_ALG_PKMODE_COPY_NSZ_B2_A0):
+ case (OP_ALG_PKMODE_COPY_NSZ_B2_A1):
+ case (OP_ALG_PKMODE_COPY_NSZ_B2_A2):
+ case (OP_ALG_PKMODE_COPY_NSZ_B2_A3):
+ case (OP_ALG_PKMODE_COPY_NSZ_B3_A0):
+ case (OP_ALG_PKMODE_COPY_NSZ_B3_A1):
+ case (OP_ALG_PKMODE_COPY_NSZ_B3_A2):
+ case (OP_ALG_PKMODE_COPY_NSZ_B3_A3):
+ case (OP_ALG_PKMODE_COPY_NSZ_A_E):
+ case (OP_ALG_PKMODE_COPY_NSZ_A_N):
+ case (OP_ALG_PKMODE_COPY_NSZ_B_E):
+ case (OP_ALG_PKMODE_COPY_NSZ_B_N):
+ case (OP_ALG_PKMODE_COPY_NSZ_N_A):
+ case (OP_ALG_PKMODE_COPY_NSZ_N_B):
+ case (OP_ALG_PKMODE_COPY_NSZ_N_E):
+ case (OP_ALG_PKMODE_COPY_SSZ_A0_B0):
+ case (OP_ALG_PKMODE_COPY_SSZ_A0_B1):
+ case (OP_ALG_PKMODE_COPY_SSZ_A0_B2):
+ case (OP_ALG_PKMODE_COPY_SSZ_A0_B3):
+ case (OP_ALG_PKMODE_COPY_SSZ_A1_B0):
+ case (OP_ALG_PKMODE_COPY_SSZ_A1_B1):
+ case (OP_ALG_PKMODE_COPY_SSZ_A1_B2):
+ case (OP_ALG_PKMODE_COPY_SSZ_A1_B3):
+ case (OP_ALG_PKMODE_COPY_SSZ_A2_B0):
+ case (OP_ALG_PKMODE_COPY_SSZ_A2_B1):
+ case (OP_ALG_PKMODE_COPY_SSZ_A2_B2):
+ case (OP_ALG_PKMODE_COPY_SSZ_A2_B3):
+ case (OP_ALG_PKMODE_COPY_SSZ_A3_B0):
+ case (OP_ALG_PKMODE_COPY_SSZ_A3_B1):
+ case (OP_ALG_PKMODE_COPY_SSZ_A3_B2):
+ case (OP_ALG_PKMODE_COPY_SSZ_A3_B3):
+ case (OP_ALG_PKMODE_COPY_SSZ_B0_A0):
+ case (OP_ALG_PKMODE_COPY_SSZ_B0_A1):
+ case (OP_ALG_PKMODE_COPY_SSZ_B0_A2):
+ case (OP_ALG_PKMODE_COPY_SSZ_B0_A3):
+ case (OP_ALG_PKMODE_COPY_SSZ_B1_A0):
+ case (OP_ALG_PKMODE_COPY_SSZ_B1_A1):
+ case (OP_ALG_PKMODE_COPY_SSZ_B1_A2):
+ case (OP_ALG_PKMODE_COPY_SSZ_B1_A3):
+ case (OP_ALG_PKMODE_COPY_SSZ_B2_A0):
+ case (OP_ALG_PKMODE_COPY_SSZ_B2_A1):
+ case (OP_ALG_PKMODE_COPY_SSZ_B2_A2):
+ case (OP_ALG_PKMODE_COPY_SSZ_B2_A3):
+ case (OP_ALG_PKMODE_COPY_SSZ_B3_A0):
+ case (OP_ALG_PKMODE_COPY_SSZ_B3_A1):
+ case (OP_ALG_PKMODE_COPY_SSZ_B3_A2):
+ case (OP_ALG_PKMODE_COPY_SSZ_B3_A3):
+ case (OP_ALG_PKMODE_COPY_SSZ_A_E):
+ case (OP_ALG_PKMODE_COPY_SSZ_A_N):
+ case (OP_ALG_PKMODE_COPY_SSZ_B_E):
+ case (OP_ALG_PKMODE_COPY_SSZ_B_N):
+ case (OP_ALG_PKMODE_COPY_SSZ_N_A):
+ case (OP_ALG_PKMODE_COPY_SSZ_N_B):
+ case (OP_ALG_PKMODE_COPY_SSZ_N_E):
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+rta_pkha_operation(struct program *program, uint32_t op_pkha)
+{
+ uint32_t opcode = CMD_OPERATION | OP_TYPE_PK | OP_ALG_PK;
+ uint32_t pkha_func;
+ unsigned int start_pc = program->current_pc;
+ int ret = -EINVAL;
+
+ pkha_func = op_pkha & OP_ALG_PK_FUN_MASK;
+
+ switch (pkha_func) {
+ case (OP_ALG_PKMODE_CLEARMEM):
+ ret = __rta_pkha_clearmem(op_pkha);
+ if (ret < 0) {
+ pr_err("OPERATION PKHA: Type not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ break;
+ case (OP_ALG_PKMODE_MOD_ADD):
+ case (OP_ALG_PKMODE_MOD_SUB_AB):
+ case (OP_ALG_PKMODE_MOD_SUB_BA):
+ case (OP_ALG_PKMODE_MOD_MULT):
+ case (OP_ALG_PKMODE_MOD_EXPO):
+ case (OP_ALG_PKMODE_MOD_REDUCT):
+ case (OP_ALG_PKMODE_MOD_INV):
+ case (OP_ALG_PKMODE_MOD_MONT_CNST):
+ case (OP_ALG_PKMODE_MOD_CRT_CNST):
+ case (OP_ALG_PKMODE_MOD_GCD):
+ case (OP_ALG_PKMODE_MOD_PRIMALITY):
+ case (OP_ALG_PKMODE_MOD_SML_EXP):
+ case (OP_ALG_PKMODE_ECC_MOD_ADD):
+ case (OP_ALG_PKMODE_ECC_MOD_DBL):
+ case (OP_ALG_PKMODE_ECC_MOD_MUL):
+ ret = __rta_pkha_mod_arithmetic(op_pkha);
+ if (ret < 0) {
+ pr_err("OPERATION PKHA: Type not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ break;
+ case (OP_ALG_PKMODE_COPY_NSZ):
+ case (OP_ALG_PKMODE_COPY_SSZ):
+ ret = __rta_pkha_copymem(op_pkha);
+ if (ret < 0) {
+ pr_err("OPERATION PKHA: Type not supported. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ break;
+ default:
+ pr_err("Invalid Operation Command\n");
+ goto err;
+ }
+
+ opcode |= op_pkha;
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_OPERATION_CMD_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/protocol_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/protocol_cmd.h
new file mode 100644
index 00000000..2e7b2f2d
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/protocol_cmd.h
@@ -0,0 +1,732 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_PROTOCOL_CMD_H__
+#define __RTA_PROTOCOL_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static inline int
+__rta_ssl_proto(uint16_t protoinfo)
+{
+ switch (protoinfo) {
+ case OP_PCL_SSL30_RC4_40_MD5_2:
+ case OP_PCL_SSL30_RC4_128_MD5_2:
+ case OP_PCL_SSL30_RC4_128_SHA_5:
+ case OP_PCL_SSL30_RC4_40_MD5_3:
+ case OP_PCL_SSL30_RC4_128_MD5_3:
+ case OP_PCL_SSL30_RC4_128_SHA:
+ case OP_PCL_SSL30_RC4_128_MD5:
+ case OP_PCL_SSL30_RC4_40_SHA:
+ case OP_PCL_SSL30_RC4_40_MD5:
+ case OP_PCL_SSL30_RC4_128_SHA_2:
+ case OP_PCL_SSL30_RC4_128_SHA_3:
+ case OP_PCL_SSL30_RC4_128_SHA_4:
+ case OP_PCL_SSL30_RC4_128_SHA_6:
+ case OP_PCL_SSL30_RC4_128_SHA_7:
+ case OP_PCL_SSL30_RC4_128_SHA_8:
+ case OP_PCL_SSL30_RC4_128_SHA_9:
+ case OP_PCL_SSL30_RC4_128_SHA_10:
+ case OP_PCL_TLS_ECDHE_PSK_RC4_128_SHA:
+ if (rta_sec_era == RTA_SEC_ERA_7)
+ return -EINVAL;
+ /* fall through if not Era 7 */
+ case OP_PCL_SSL30_DES40_CBC_SHA:
+ case OP_PCL_SSL30_DES_CBC_SHA_2:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_5:
+ case OP_PCL_SSL30_DES40_CBC_SHA_2:
+ case OP_PCL_SSL30_DES_CBC_SHA_3:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_6:
+ case OP_PCL_SSL30_DES40_CBC_SHA_3:
+ case OP_PCL_SSL30_DES_CBC_SHA_4:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_7:
+ case OP_PCL_SSL30_DES40_CBC_SHA_4:
+ case OP_PCL_SSL30_DES_CBC_SHA_5:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_8:
+ case OP_PCL_SSL30_DES40_CBC_SHA_5:
+ case OP_PCL_SSL30_DES_CBC_SHA_6:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_9:
+ case OP_PCL_SSL30_DES40_CBC_SHA_6:
+ case OP_PCL_SSL30_DES_CBC_SHA_7:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_10:
+ case OP_PCL_SSL30_DES_CBC_SHA:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA:
+ case OP_PCL_SSL30_DES_CBC_MD5:
+ case OP_PCL_SSL30_3DES_EDE_CBC_MD5:
+ case OP_PCL_SSL30_DES40_CBC_SHA_7:
+ case OP_PCL_SSL30_DES40_CBC_MD5:
+ case OP_PCL_SSL30_AES_128_CBC_SHA:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_2:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_3:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_4:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_5:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_6:
+ case OP_PCL_SSL30_AES_256_CBC_SHA:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_2:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_3:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_4:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_5:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_6:
+ case OP_PCL_TLS12_AES_128_CBC_SHA256_2:
+ case OP_PCL_TLS12_AES_128_CBC_SHA256_3:
+ case OP_PCL_TLS12_AES_128_CBC_SHA256_4:
+ case OP_PCL_TLS12_AES_128_CBC_SHA256_5:
+ case OP_PCL_TLS12_AES_256_CBC_SHA256_2:
+ case OP_PCL_TLS12_AES_256_CBC_SHA256_3:
+ case OP_PCL_TLS12_AES_256_CBC_SHA256_4:
+ case OP_PCL_TLS12_AES_256_CBC_SHA256_5:
+ case OP_PCL_TLS12_AES_128_CBC_SHA256_6:
+ case OP_PCL_TLS12_AES_256_CBC_SHA256_6:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_2:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_7:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_7:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_3:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_8:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_8:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_4:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_9:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_9:
+ case OP_PCL_SSL30_AES_128_GCM_SHA256_1:
+ case OP_PCL_SSL30_AES_256_GCM_SHA384_1:
+ case OP_PCL_SSL30_AES_128_GCM_SHA256_2:
+ case OP_PCL_SSL30_AES_256_GCM_SHA384_2:
+ case OP_PCL_SSL30_AES_128_GCM_SHA256_3:
+ case OP_PCL_SSL30_AES_256_GCM_SHA384_3:
+ case OP_PCL_SSL30_AES_128_GCM_SHA256_4:
+ case OP_PCL_SSL30_AES_256_GCM_SHA384_4:
+ case OP_PCL_SSL30_AES_128_GCM_SHA256_5:
+ case OP_PCL_SSL30_AES_256_GCM_SHA384_5:
+ case OP_PCL_SSL30_AES_128_GCM_SHA256_6:
+ case OP_PCL_TLS_DH_ANON_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_PSK_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_PSK_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_DHE_PSK_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_DHE_PSK_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_RSA_PSK_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_RSA_PSK_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_PSK_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_PSK_AES_256_CBC_SHA384:
+ case OP_PCL_TLS_DHE_PSK_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_DHE_PSK_AES_256_CBC_SHA384:
+ case OP_PCL_TLS_RSA_PSK_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_RSA_PSK_AES_256_CBC_SHA384:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_11:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_10:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_10:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_12:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_11:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_11:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_12:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_13:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_12:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_14:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_13:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_13:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_15:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_14:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_14:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_16:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_17:
+ case OP_PCL_SSL30_3DES_EDE_CBC_SHA_18:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_15:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_16:
+ case OP_PCL_SSL30_AES_128_CBC_SHA_17:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_15:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_16:
+ case OP_PCL_SSL30_AES_256_CBC_SHA_17:
+ case OP_PCL_TLS_ECDHE_ECDSA_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_ECDHE_ECDSA_AES_256_CBC_SHA384:
+ case OP_PCL_TLS_ECDH_ECDSA_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_ECDH_ECDSA_AES_256_CBC_SHA384:
+ case OP_PCL_TLS_ECDHE_RSA_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_ECDHE_RSA_AES_256_CBC_SHA384:
+ case OP_PCL_TLS_ECDH_RSA_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_ECDH_RSA_AES_256_CBC_SHA384:
+ case OP_PCL_TLS_ECDHE_ECDSA_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_ECDHE_ECDSA_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_ECDH_ECDSA_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_ECDH_ECDSA_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_ECDHE_RSA_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_ECDHE_RSA_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_ECDH_RSA_AES_128_GCM_SHA256:
+ case OP_PCL_TLS_ECDH_RSA_AES_256_GCM_SHA384:
+ case OP_PCL_TLS_ECDHE_PSK_3DES_EDE_CBC_SHA:
+ case OP_PCL_TLS_ECDHE_PSK_AES_128_CBC_SHA:
+ case OP_PCL_TLS_ECDHE_PSK_AES_256_CBC_SHA:
+ case OP_PCL_TLS_ECDHE_PSK_AES_128_CBC_SHA256:
+ case OP_PCL_TLS_ECDHE_PSK_AES_256_CBC_SHA384:
+ case OP_PCL_TLS12_3DES_EDE_CBC_MD5:
+ case OP_PCL_TLS12_3DES_EDE_CBC_SHA160:
+ case OP_PCL_TLS12_3DES_EDE_CBC_SHA224:
+ case OP_PCL_TLS12_3DES_EDE_CBC_SHA256:
+ case OP_PCL_TLS12_3DES_EDE_CBC_SHA384:
+ case OP_PCL_TLS12_3DES_EDE_CBC_SHA512:
+ case OP_PCL_TLS12_AES_128_CBC_SHA160:
+ case OP_PCL_TLS12_AES_128_CBC_SHA224:
+ case OP_PCL_TLS12_AES_128_CBC_SHA256:
+ case OP_PCL_TLS12_AES_128_CBC_SHA384:
+ case OP_PCL_TLS12_AES_128_CBC_SHA512:
+ case OP_PCL_TLS12_AES_192_CBC_SHA160:
+ case OP_PCL_TLS12_AES_192_CBC_SHA224:
+ case OP_PCL_TLS12_AES_192_CBC_SHA256:
+ case OP_PCL_TLS12_AES_192_CBC_SHA512:
+ case OP_PCL_TLS12_AES_256_CBC_SHA160:
+ case OP_PCL_TLS12_AES_256_CBC_SHA224:
+ case OP_PCL_TLS12_AES_256_CBC_SHA256:
+ case OP_PCL_TLS12_AES_256_CBC_SHA384:
+ case OP_PCL_TLS12_AES_256_CBC_SHA512:
+ case OP_PCL_TLS_PVT_AES_192_CBC_SHA160:
+ case OP_PCL_TLS_PVT_AES_192_CBC_SHA384:
+ case OP_PCL_TLS_PVT_AES_192_CBC_SHA224:
+ case OP_PCL_TLS_PVT_AES_192_CBC_SHA512:
+ case OP_PCL_TLS_PVT_AES_192_CBC_SHA256:
+ case OP_PCL_TLS_PVT_MASTER_SECRET_PRF_FE:
+ case OP_PCL_TLS_PVT_MASTER_SECRET_PRF_FF:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_ike_proto(uint16_t protoinfo)
+{
+ switch (protoinfo) {
+ case OP_PCL_IKE_HMAC_MD5:
+ case OP_PCL_IKE_HMAC_SHA1:
+ case OP_PCL_IKE_HMAC_AES128_CBC:
+ case OP_PCL_IKE_HMAC_SHA256:
+ case OP_PCL_IKE_HMAC_SHA384:
+ case OP_PCL_IKE_HMAC_SHA512:
+ case OP_PCL_IKE_HMAC_AES128_CMAC:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_ipsec_proto(uint16_t protoinfo)
+{
+ uint16_t proto_cls1 = protoinfo & OP_PCL_IPSEC_CIPHER_MASK;
+ uint16_t proto_cls2 = protoinfo & OP_PCL_IPSEC_AUTH_MASK;
+
+ switch (proto_cls1) {
+ case OP_PCL_IPSEC_AES_NULL_WITH_GMAC:
+ if (rta_sec_era < RTA_SEC_ERA_2)
+ return -EINVAL;
+ /* no break */
+ case OP_PCL_IPSEC_AES_CCM8:
+ case OP_PCL_IPSEC_AES_CCM12:
+ case OP_PCL_IPSEC_AES_CCM16:
+ case OP_PCL_IPSEC_AES_GCM8:
+ case OP_PCL_IPSEC_AES_GCM12:
+ case OP_PCL_IPSEC_AES_GCM16:
+ /* CCM, GCM, GMAC require PROTINFO[7:0] = 0 */
+ if (proto_cls2 == OP_PCL_IPSEC_HMAC_NULL)
+ return 0;
+ return -EINVAL;
+ case OP_PCL_IPSEC_NULL:
+ if (rta_sec_era < RTA_SEC_ERA_2)
+ return -EINVAL;
+ /* no break */
+ case OP_PCL_IPSEC_DES_IV64:
+ case OP_PCL_IPSEC_DES:
+ case OP_PCL_IPSEC_3DES:
+ case OP_PCL_IPSEC_AES_CBC:
+ case OP_PCL_IPSEC_AES_CTR:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (proto_cls2) {
+ case OP_PCL_IPSEC_HMAC_NULL:
+ case OP_PCL_IPSEC_HMAC_MD5_96:
+ case OP_PCL_IPSEC_HMAC_SHA1_96:
+ case OP_PCL_IPSEC_AES_XCBC_MAC_96:
+ case OP_PCL_IPSEC_HMAC_MD5_128:
+ case OP_PCL_IPSEC_HMAC_SHA1_160:
+ case OP_PCL_IPSEC_AES_CMAC_96:
+ case OP_PCL_IPSEC_HMAC_SHA2_256_128:
+ case OP_PCL_IPSEC_HMAC_SHA2_384_192:
+ case OP_PCL_IPSEC_HMAC_SHA2_512_256:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_srtp_proto(uint16_t protoinfo)
+{
+ uint16_t proto_cls1 = protoinfo & OP_PCL_SRTP_CIPHER_MASK;
+ uint16_t proto_cls2 = protoinfo & OP_PCL_SRTP_AUTH_MASK;
+
+ switch (proto_cls1) {
+ case OP_PCL_SRTP_AES_CTR:
+ switch (proto_cls2) {
+ case OP_PCL_SRTP_HMAC_SHA1_160:
+ return 0;
+ }
+ /* no break */
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_macsec_proto(uint16_t protoinfo)
+{
+ switch (protoinfo) {
+ case OP_PCL_MACSEC:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_wifi_proto(uint16_t protoinfo)
+{
+ switch (protoinfo) {
+ case OP_PCL_WIFI:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_wimax_proto(uint16_t protoinfo)
+{
+ switch (protoinfo) {
+ case OP_PCL_WIMAX_OFDM:
+ case OP_PCL_WIMAX_OFDMA:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/* Allowed blob proto flags for each SEC Era */
+static const uint32_t proto_blob_flags[] = {
+ OP_PCL_BLOB_FORMAT_MASK | OP_PCL_BLOB_BLACK,
+ OP_PCL_BLOB_FORMAT_MASK | OP_PCL_BLOB_BLACK | OP_PCL_BLOB_TKEK |
+ OP_PCL_BLOB_EKT | OP_PCL_BLOB_REG_MASK,
+ OP_PCL_BLOB_FORMAT_MASK | OP_PCL_BLOB_BLACK | OP_PCL_BLOB_TKEK |
+ OP_PCL_BLOB_EKT | OP_PCL_BLOB_REG_MASK,
+ OP_PCL_BLOB_FORMAT_MASK | OP_PCL_BLOB_BLACK | OP_PCL_BLOB_TKEK |
+ OP_PCL_BLOB_EKT | OP_PCL_BLOB_REG_MASK | OP_PCL_BLOB_SEC_MEM,
+ OP_PCL_BLOB_FORMAT_MASK | OP_PCL_BLOB_BLACK | OP_PCL_BLOB_TKEK |
+ OP_PCL_BLOB_EKT | OP_PCL_BLOB_REG_MASK | OP_PCL_BLOB_SEC_MEM
+};
+
+static inline int
+__rta_blob_proto(uint16_t protoinfo)
+{
+ if (protoinfo & ~proto_blob_flags[rta_sec_era])
+ return -EINVAL;
+
+ switch (protoinfo & OP_PCL_BLOB_FORMAT_MASK) {
+ case OP_PCL_BLOB_FORMAT_NORMAL:
+ case OP_PCL_BLOB_FORMAT_MASTER_VER:
+ case OP_PCL_BLOB_FORMAT_TEST:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (protoinfo & OP_PCL_BLOB_REG_MASK) {
+ case OP_PCL_BLOB_AFHA_SBOX:
+ if (rta_sec_era < RTA_SEC_ERA_3)
+ return -EINVAL;
+ /* no break */
+ case OP_PCL_BLOB_REG_MEMORY:
+ case OP_PCL_BLOB_REG_KEY1:
+ case OP_PCL_BLOB_REG_KEY2:
+ case OP_PCL_BLOB_REG_SPLIT:
+ case OP_PCL_BLOB_REG_PKE:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_dlc_proto(uint16_t protoinfo)
+{
+ if ((rta_sec_era < RTA_SEC_ERA_2) &&
+ (protoinfo & (OP_PCL_PKPROT_DSA_MSG | OP_PCL_PKPROT_HASH_MASK |
+ OP_PCL_PKPROT_EKT_Z | OP_PCL_PKPROT_DECRYPT_Z |
+ OP_PCL_PKPROT_DECRYPT_PRI)))
+ return -EINVAL;
+
+ switch (protoinfo & OP_PCL_PKPROT_HASH_MASK) {
+ case OP_PCL_PKPROT_HASH_MD5:
+ case OP_PCL_PKPROT_HASH_SHA1:
+ case OP_PCL_PKPROT_HASH_SHA224:
+ case OP_PCL_PKPROT_HASH_SHA256:
+ case OP_PCL_PKPROT_HASH_SHA384:
+ case OP_PCL_PKPROT_HASH_SHA512:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline int
+__rta_rsa_enc_proto(uint16_t protoinfo)
+{
+ switch (protoinfo & OP_PCL_RSAPROT_OP_MASK) {
+ case OP_PCL_RSAPROT_OP_ENC_F_IN:
+ if ((protoinfo & OP_PCL_RSAPROT_FFF_MASK) !=
+ OP_PCL_RSAPROT_FFF_RED)
+ return -EINVAL;
+ break;
+ case OP_PCL_RSAPROT_OP_ENC_F_OUT:
+ switch (protoinfo & OP_PCL_RSAPROT_FFF_MASK) {
+ case OP_PCL_RSAPROT_FFF_RED:
+ case OP_PCL_RSAPROT_FFF_ENC:
+ case OP_PCL_RSAPROT_FFF_EKT:
+ case OP_PCL_RSAPROT_FFF_TK_ENC:
+ case OP_PCL_RSAPROT_FFF_TK_EKT:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline int
+__rta_rsa_dec_proto(uint16_t protoinfo)
+{
+ switch (protoinfo & OP_PCL_RSAPROT_OP_MASK) {
+ case OP_PCL_RSAPROT_OP_DEC_ND:
+ case OP_PCL_RSAPROT_OP_DEC_PQD:
+ case OP_PCL_RSAPROT_OP_DEC_PQDPDQC:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (protoinfo & OP_PCL_RSAPROT_PPP_MASK) {
+ case OP_PCL_RSAPROT_PPP_RED:
+ case OP_PCL_RSAPROT_PPP_ENC:
+ case OP_PCL_RSAPROT_PPP_EKT:
+ case OP_PCL_RSAPROT_PPP_TK_ENC:
+ case OP_PCL_RSAPROT_PPP_TK_EKT:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (protoinfo & OP_PCL_RSAPROT_FMT_PKCSV15)
+ switch (protoinfo & OP_PCL_RSAPROT_FFF_MASK) {
+ case OP_PCL_RSAPROT_FFF_RED:
+ case OP_PCL_RSAPROT_FFF_ENC:
+ case OP_PCL_RSAPROT_FFF_EKT:
+ case OP_PCL_RSAPROT_FFF_TK_ENC:
+ case OP_PCL_RSAPROT_FFF_TK_EKT:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * DKP Protocol - Restrictions on key (SRC,DST) combinations
+ * For e.g. key_in_out[0][0] = 1 means (SRC=IMM,DST=IMM) combination is allowed
+ */
+static const uint8_t key_in_out[4][4] = { {1, 0, 0, 0},
+ {1, 1, 1, 1},
+ {1, 0, 1, 0},
+ {1, 0, 0, 1} };
+
+static inline int
+__rta_dkp_proto(uint16_t protoinfo)
+{
+ int key_src = (protoinfo & OP_PCL_DKP_SRC_MASK) >> OP_PCL_DKP_SRC_SHIFT;
+ int key_dst = (protoinfo & OP_PCL_DKP_DST_MASK) >> OP_PCL_DKP_DST_SHIFT;
+
+ if (!key_in_out[key_src][key_dst]) {
+ pr_err("PROTO_DESC: Invalid DKP key (SRC,DST)\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static inline int
+__rta_3g_dcrc_proto(uint16_t protoinfo)
+{
+ if (rta_sec_era == RTA_SEC_ERA_7)
+ return -EINVAL;
+
+ switch (protoinfo) {
+ case OP_PCL_3G_DCRC_CRC7:
+ case OP_PCL_3G_DCRC_CRC11:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_3g_rlc_proto(uint16_t protoinfo)
+{
+ if (rta_sec_era == RTA_SEC_ERA_7)
+ return -EINVAL;
+
+ switch (protoinfo) {
+ case OP_PCL_3G_RLC_NULL:
+ case OP_PCL_3G_RLC_KASUMI:
+ case OP_PCL_3G_RLC_SNOW:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_lte_pdcp_proto(uint16_t protoinfo)
+{
+ if (rta_sec_era == RTA_SEC_ERA_7)
+ return -EINVAL;
+
+ switch (protoinfo) {
+ case OP_PCL_LTE_ZUC:
+ if (rta_sec_era < RTA_SEC_ERA_5)
+ break;
+ case OP_PCL_LTE_NULL:
+ case OP_PCL_LTE_SNOW:
+ case OP_PCL_LTE_AES:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline int
+__rta_lte_pdcp_mixed_proto(uint16_t protoinfo)
+{
+ switch (protoinfo & OP_PCL_LTE_MIXED_AUTH_MASK) {
+ case OP_PCL_LTE_MIXED_AUTH_NULL:
+ case OP_PCL_LTE_MIXED_AUTH_SNOW:
+ case OP_PCL_LTE_MIXED_AUTH_AES:
+ case OP_PCL_LTE_MIXED_AUTH_ZUC:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (protoinfo & OP_PCL_LTE_MIXED_ENC_MASK) {
+ case OP_PCL_LTE_MIXED_ENC_NULL:
+ case OP_PCL_LTE_MIXED_ENC_SNOW:
+ case OP_PCL_LTE_MIXED_ENC_AES:
+ case OP_PCL_LTE_MIXED_ENC_ZUC:
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+struct proto_map {
+ uint32_t optype;
+ uint32_t protid;
+ int (*protoinfo_func)(uint16_t);
+};
+
+static const struct proto_map proto_table[] = {
+/*1*/ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_SSL30_PRF, __rta_ssl_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_TLS10_PRF, __rta_ssl_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_TLS11_PRF, __rta_ssl_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_TLS12_PRF, __rta_ssl_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DTLS10_PRF, __rta_ssl_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_IKEV1_PRF, __rta_ike_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_IKEV2_PRF, __rta_ike_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_PUBLICKEYPAIR, __rta_dlc_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DSASIGN, __rta_dlc_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DSAVERIFY, __rta_dlc_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_IPSEC, __rta_ipsec_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_SRTP, __rta_srtp_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_SSL30, __rta_ssl_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_TLS10, __rta_ssl_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_TLS11, __rta_ssl_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_TLS12, __rta_ssl_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_DTLS10, __rta_ssl_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_MACSEC, __rta_macsec_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_WIFI, __rta_wifi_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_WIMAX, __rta_wimax_proto},
+/*21*/ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_BLOB, __rta_blob_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DIFFIEHELLMAN, __rta_dlc_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_RSAENCRYPT, __rta_rsa_enc_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_RSADECRYPT, __rta_rsa_dec_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_3G_DCRC, __rta_3g_dcrc_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_3G_RLC_PDU, __rta_3g_rlc_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_3G_RLC_SDU, __rta_3g_rlc_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_LTE_PDCP_USER, __rta_lte_pdcp_proto},
+/*29*/ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_LTE_PDCP_CTRL, __rta_lte_pdcp_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DKP_MD5, __rta_dkp_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DKP_SHA1, __rta_dkp_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DKP_SHA224, __rta_dkp_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DKP_SHA256, __rta_dkp_proto},
+ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DKP_SHA384, __rta_dkp_proto},
+/*35*/ {OP_TYPE_UNI_PROTOCOL, OP_PCLID_DKP_SHA512, __rta_dkp_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_PUBLICKEYPAIR, __rta_dlc_proto},
+/*37*/ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_DSASIGN, __rta_dlc_proto},
+/*38*/ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_LTE_PDCP_CTRL_MIXED,
+ __rta_lte_pdcp_mixed_proto},
+ {OP_TYPE_DECAP_PROTOCOL, OP_PCLID_IPSEC_NEW, __rta_ipsec_proto},
+};
+
+/*
+ * Allowed OPERATION protocols for each SEC Era.
+ * Values represent the number of entries from proto_table[] that are supported.
+ */
+static const unsigned int proto_table_sz[] = {21, 29, 29, 29, 29, 35, 37, 39};
+
+static inline int
+rta_proto_operation(struct program *program, uint32_t optype,
+ uint32_t protid, uint16_t protoinfo)
+{
+ uint32_t opcode = CMD_OPERATION;
+ unsigned int i, found = 0;
+ uint32_t optype_tmp = optype;
+ unsigned int start_pc = program->current_pc;
+ int ret = -EINVAL;
+
+ for (i = 0; i < proto_table_sz[rta_sec_era]; i++) {
+ /* clear last bit in optype to match also decap proto */
+ optype_tmp &= (uint32_t)~(1 << OP_TYPE_SHIFT);
+ if (optype_tmp == proto_table[i].optype) {
+ if (proto_table[i].protid == protid) {
+ /* nothing else to verify */
+ if (proto_table[i].protoinfo_func == NULL) {
+ found = 1;
+ break;
+ }
+ /* check protoinfo */
+ ret = (*proto_table[i].protoinfo_func)
+ (protoinfo);
+ if (ret < 0) {
+ pr_err("PROTO_DESC: Bad PROTO Type. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+ found = 1;
+ break;
+ }
+ }
+ }
+ if (!found) {
+ pr_err("PROTO_DESC: Operation Type Mismatch. SEC Program Line: %d\n",
+ program->current_pc);
+ goto err;
+ }
+
+ __rta_out32(program, opcode | optype | protid | protoinfo);
+ program->current_instruction++;
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+static inline int
+rta_dkp_proto(struct program *program, uint32_t protid,
+ uint16_t key_src, uint16_t key_dst,
+ uint16_t keylen, uint64_t key,
+ enum rta_data_type key_type)
+{
+ unsigned int start_pc = program->current_pc;
+ unsigned int in_words = 0, out_words = 0;
+ int ret;
+
+ key_src &= OP_PCL_DKP_SRC_MASK;
+ key_dst &= OP_PCL_DKP_DST_MASK;
+ keylen &= OP_PCL_DKP_KEY_MASK;
+
+ ret = rta_proto_operation(program, OP_TYPE_UNI_PROTOCOL, protid,
+ key_src | key_dst | keylen);
+ if (ret < 0)
+ return ret;
+
+ if ((key_src == OP_PCL_DKP_SRC_PTR) ||
+ (key_src == OP_PCL_DKP_SRC_SGF)) {
+ __rta_out64(program, program->ps, key);
+ in_words = program->ps ? 2 : 1;
+ } else if (key_src == OP_PCL_DKP_SRC_IMM) {
+ __rta_inline_data(program, key, inline_flags(key_type), keylen);
+ in_words = (unsigned int)((keylen + 3) / 4);
+ }
+
+ if ((key_dst == OP_PCL_DKP_DST_PTR) ||
+ (key_dst == OP_PCL_DKP_DST_SGF)) {
+ out_words = in_words;
+ } else if (key_dst == OP_PCL_DKP_DST_IMM) {
+ out_words = split_key_len(protid) / 4;
+ }
+
+ if (out_words < in_words) {
+ pr_err("PROTO_DESC: DKP doesn't currently support a smaller descriptor\n");
+ program->first_error_pc = start_pc;
+ return -EINVAL;
+ }
+
+ /* If needed, reserve space in resulting descriptor for derived key */
+ program->current_pc += (out_words - in_words);
+
+ return (int)start_pc;
+}
+
+#endif /* __RTA_PROTOCOL_CMD_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/sec_run_time_asm.h b/drivers/crypto/dpaa2_sec/hw/rta/sec_run_time_asm.h
new file mode 100644
index 00000000..c12edb0c
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/sec_run_time_asm.h
@@ -0,0 +1,823 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_SEC_RUN_TIME_ASM_H__
+#define __RTA_SEC_RUN_TIME_ASM_H__
+
+#include "hw/desc.h"
+
+/* hw/compat.h is not delivered in kernel */
+#ifndef __KERNEL__
+#include "hw/compat.h"
+#endif
+
+/**
+ * enum rta_sec_era - SEC HW block revisions supported by the RTA library
+ * @RTA_SEC_ERA_1: SEC Era 1
+ * @RTA_SEC_ERA_2: SEC Era 2
+ * @RTA_SEC_ERA_3: SEC Era 3
+ * @RTA_SEC_ERA_4: SEC Era 4
+ * @RTA_SEC_ERA_5: SEC Era 5
+ * @RTA_SEC_ERA_6: SEC Era 6
+ * @RTA_SEC_ERA_7: SEC Era 7
+ * @RTA_SEC_ERA_8: SEC Era 8
+ * @MAX_SEC_ERA: maximum SEC HW block revision supported by RTA library
+ */
+enum rta_sec_era {
+ RTA_SEC_ERA_1,
+ RTA_SEC_ERA_2,
+ RTA_SEC_ERA_3,
+ RTA_SEC_ERA_4,
+ RTA_SEC_ERA_5,
+ RTA_SEC_ERA_6,
+ RTA_SEC_ERA_7,
+ RTA_SEC_ERA_8,
+ MAX_SEC_ERA = RTA_SEC_ERA_8
+};
+
+/**
+ * DEFAULT_SEC_ERA - the default value for the SEC era in case the user provides
+ * an unsupported value.
+ */
+#define DEFAULT_SEC_ERA MAX_SEC_ERA
+
+/**
+ * USER_SEC_ERA - translates the SEC Era from internal to user representation.
+ * @sec_era: SEC Era in internal (library) representation
+ */
+#define USER_SEC_ERA(sec_era) (sec_era + 1)
+
+/**
+ * INTL_SEC_ERA - translates the SEC Era from user representation to internal.
+ * @sec_era: SEC Era in user representation
+ */
+#define INTL_SEC_ERA(sec_era) (sec_era - 1)
+
+/**
+ * enum rta_jump_type - Types of action taken by JUMP command
+ * @LOCAL_JUMP: conditional jump to an offset within the descriptor buffer
+ * @FAR_JUMP: conditional jump to a location outside the descriptor buffer,
+ * indicated by the POINTER field after the JUMP command.
+ * @HALT: conditional halt - stop the execution of the current descriptor and
+ * writes PKHA / Math condition bits as status / error code.
+ * @HALT_STATUS: conditional halt with user-specified status - stop the
+ * execution of the current descriptor and writes the value of
+ * "LOCAL OFFSET" JUMP field as status / error code.
+ * @GOSUB: conditional subroutine call - similar to @LOCAL_JUMP, but also saves
+ * return address in the Return Address register; subroutine calls
+ * cannot be nested.
+ * @RETURN: conditional subroutine return - similar to @LOCAL_JUMP, but the
+ * offset is taken from the Return Address register.
+ * @LOCAL_JUMP_INC: similar to @LOCAL_JUMP, but increment the register specified
+ * in "SRC_DST" JUMP field before evaluating the jump
+ * condition.
+ * @LOCAL_JUMP_DEC: similar to @LOCAL_JUMP, but decrement the register specified
+ * in "SRC_DST" JUMP field before evaluating the jump
+ * condition.
+ */
+enum rta_jump_type {
+ LOCAL_JUMP,
+ FAR_JUMP,
+ HALT,
+ HALT_STATUS,
+ GOSUB,
+ RETURN,
+ LOCAL_JUMP_INC,
+ LOCAL_JUMP_DEC
+};
+
+/**
+ * enum rta_jump_cond - How test conditions are evaluated by JUMP command
+ * @ALL_TRUE: perform action if ALL selected conditions are true
+ * @ALL_FALSE: perform action if ALL selected conditions are false
+ * @ANY_TRUE: perform action if ANY of the selected conditions is true
+ * @ANY_FALSE: perform action if ANY of the selected conditions is false
+ */
+enum rta_jump_cond {
+ ALL_TRUE,
+ ALL_FALSE,
+ ANY_TRUE,
+ ANY_FALSE
+};
+
+/**
+ * enum rta_share_type - Types of sharing for JOB_HDR and SHR_HDR commands
+ * @SHR_NEVER: nothing is shared; descriptors can execute in parallel (i.e. no
+ * dependencies are allowed between them).
+ * @SHR_WAIT: shared descriptor and keys are shared once the descriptor sets
+ * "OK to share" in DECO Control Register (DCTRL).
+ * @SHR_SERIAL: shared descriptor and keys are shared once the descriptor has
+ * completed.
+ * @SHR_ALWAYS: shared descriptor is shared anytime after the descriptor is
+ * loaded.
+ * @SHR_DEFER: valid only for JOB_HDR; sharing type is the one specified
+ * in the shared descriptor associated with the job descriptor.
+ */
+enum rta_share_type {
+ SHR_NEVER,
+ SHR_WAIT,
+ SHR_SERIAL,
+ SHR_ALWAYS,
+ SHR_DEFER
+};
+
+/**
+ * enum rta_data_type - Indicates how is the data provided and how to include it
+ * in the descriptor.
+ * @RTA_DATA_PTR: Data is in memory and accessed by reference; data address is a
+ * physical (bus) address.
+ * @RTA_DATA_IMM: Data is inlined in descriptor and accessed as immediate data;
+ * data address is a virtual address.
+ * @RTA_DATA_IMM_DMA: (AIOP only) Data is inlined in descriptor and accessed as
+ * immediate data; data address is a physical (bus) address
+ * in external memory and CDMA is programmed to transfer the
+ * data into descriptor buffer being built in Workspace Area.
+ */
+enum rta_data_type {
+ RTA_DATA_PTR = 1,
+ RTA_DATA_IMM,
+ RTA_DATA_IMM_DMA
+};
+
+/* Registers definitions */
+enum rta_regs {
+ /* CCB Registers */
+ CONTEXT1 = 1,
+ CONTEXT2,
+ KEY1,
+ KEY2,
+ KEY1SZ,
+ KEY2SZ,
+ ICV1SZ,
+ ICV2SZ,
+ DATA1SZ,
+ DATA2SZ,
+ ALTDS1,
+ IV1SZ,
+ AAD1SZ,
+ MODE1,
+ MODE2,
+ CCTRL,
+ DCTRL,
+ ICTRL,
+ CLRW,
+ CSTAT,
+ IFIFO,
+ NFIFO,
+ OFIFO,
+ PKASZ,
+ PKBSZ,
+ PKNSZ,
+ PKESZ,
+ /* DECO Registers */
+ MATH0,
+ MATH1,
+ MATH2,
+ MATH3,
+ DESCBUF,
+ JOBDESCBUF,
+ SHAREDESCBUF,
+ DPOVRD,
+ DJQDA,
+ DSTAT,
+ DPID,
+ DJQCTRL,
+ ALTSOURCE,
+ SEQINSZ,
+ SEQOUTSZ,
+ VSEQINSZ,
+ VSEQOUTSZ,
+ /* PKHA Registers */
+ PKA,
+ PKN,
+ PKA0,
+ PKA1,
+ PKA2,
+ PKA3,
+ PKB,
+ PKB0,
+ PKB1,
+ PKB2,
+ PKB3,
+ PKE,
+ /* Pseudo registers */
+ AB1,
+ AB2,
+ ABD,
+ IFIFOABD,
+ IFIFOAB1,
+ IFIFOAB2,
+ AFHA_SBOX,
+ MDHA_SPLIT_KEY,
+ JOBSRC,
+ ZERO,
+ ONE,
+ AAD1,
+ IV1,
+ IV2,
+ MSG1,
+ MSG2,
+ MSG,
+ MSG_CKSUM,
+ MSGOUTSNOOP,
+ MSGINSNOOP,
+ ICV1,
+ ICV2,
+ SKIP,
+ NONE,
+ RNGOFIFO,
+ RNG,
+ IDFNS,
+ ODFNS,
+ NFIFOSZ,
+ SZ,
+ PAD,
+ SAD1,
+ AAD2,
+ BIT_DATA,
+ NFIFO_SZL,
+ NFIFO_SZM,
+ NFIFO_L,
+ NFIFO_M,
+ SZL,
+ SZM,
+ JOBDESCBUF_EFF,
+ SHAREDESCBUF_EFF,
+ METADATA,
+ GTR,
+ STR,
+ OFIFO_SYNC,
+ MSGOUTSNOOP_ALT
+};
+
+/* Command flags */
+#define FLUSH1 BIT(0)
+#define LAST1 BIT(1)
+#define LAST2 BIT(2)
+#define IMMED BIT(3)
+#define SGF BIT(4)
+#define VLF BIT(5)
+#define EXT BIT(6)
+#define CONT BIT(7)
+#define SEQ BIT(8)
+#define AIDF BIT(9)
+#define FLUSH2 BIT(10)
+#define CLASS1 BIT(11)
+#define CLASS2 BIT(12)
+#define BOTH BIT(13)
+
+/**
+ * DCOPY - (AIOP only) command param is pointer to external memory
+ *
+ * CDMA must be used to transfer the key via DMA into Workspace Area.
+ * Valid only in combination with IMMED flag.
+ */
+#define DCOPY BIT(30)
+
+#define COPY BIT(31) /* command param is pointer (not immediate)
+ * valid only in combination when IMMED
+ */
+
+#define __COPY_MASK (COPY | DCOPY)
+
+/* SEQ IN/OUT PTR Command specific flags */
+#define RBS BIT(16)
+#define INL BIT(17)
+#define PRE BIT(18)
+#define RTO BIT(19)
+#define RJD BIT(20)
+#define SOP BIT(21)
+#define RST BIT(22)
+#define EWS BIT(23)
+
+#define ENC BIT(14) /* Encrypted Key */
+#define EKT BIT(15) /* AES CCM Encryption (default is
+ * AES ECB Encryption)
+ */
+#define TK BIT(16) /* Trusted Descriptor Key (default is
+ * Job Descriptor Key)
+ */
+#define NWB BIT(17) /* No Write Back Key */
+#define PTS BIT(18) /* Plaintext Store */
+
+/* HEADER Command specific flags */
+#define RIF BIT(16)
+#define DNR BIT(17)
+#define CIF BIT(18)
+#define PD BIT(19)
+#define RSMS BIT(20)
+#define TD BIT(21)
+#define MTD BIT(22)
+#define REO BIT(23)
+#define SHR BIT(24)
+#define SC BIT(25)
+/* Extended HEADER specific flags */
+#define DSV BIT(7)
+#define DSEL_MASK 0x00000007 /* DECO Select */
+#define FTD BIT(8)
+
+/* JUMP Command specific flags */
+#define NIFP BIT(20)
+#define NIP BIT(21)
+#define NOP BIT(22)
+#define NCP BIT(23)
+#define CALM BIT(24)
+
+#define MATH_Z BIT(25)
+#define MATH_N BIT(26)
+#define MATH_NV BIT(27)
+#define MATH_C BIT(28)
+#define PK_0 BIT(29)
+#define PK_GCD_1 BIT(30)
+#define PK_PRIME BIT(31)
+#define SELF BIT(0)
+#define SHRD BIT(1)
+#define JQP BIT(2)
+
+/* NFIFOADD specific flags */
+#define PAD_ZERO BIT(16)
+#define PAD_NONZERO BIT(17)
+#define PAD_INCREMENT BIT(18)
+#define PAD_RANDOM BIT(19)
+#define PAD_ZERO_N1 BIT(20)
+#define PAD_NONZERO_0 BIT(21)
+#define PAD_N1 BIT(23)
+#define PAD_NONZERO_N BIT(24)
+#define OC BIT(25)
+#define BM BIT(26)
+#define PR BIT(27)
+#define PS BIT(28)
+#define BP BIT(29)
+
+/* MOVE Command specific flags */
+#define WAITCOMP BIT(16)
+#define SIZE_WORD BIT(17)
+#define SIZE_BYTE BIT(18)
+#define SIZE_DWORD BIT(19)
+
+/* MATH command specific flags */
+#define IFB MATH_IFB
+#define NFU MATH_NFU
+#define STL MATH_STL
+#define SSEL MATH_SSEL
+#define SWP MATH_SWP
+#define IMMED2 BIT(31)
+
+/**
+ * struct program - descriptor buffer management structure
+ * @current_pc: current offset in descriptor
+ * @current_instruction: current instruction in descriptor
+ * @first_error_pc: offset of the first error in descriptor
+ * @start_pc: start offset in descriptor buffer
+ * @buffer: buffer carrying descriptor
+ * @shrhdr: shared descriptor header
+ * @jobhdr: job descriptor header
+ * @ps: pointer fields size; if ps is true, pointers will be 36bits in
+ * length; if ps is false, pointers will be 32bits in length
+ * @bswap: if true, perform byte swap on a 4-byte boundary
+ */
+struct program {
+ unsigned int current_pc;
+ unsigned int current_instruction;
+ unsigned int first_error_pc;
+ unsigned int start_pc;
+ uint32_t *buffer;
+ uint32_t *shrhdr;
+ uint32_t *jobhdr;
+ bool ps;
+ bool bswap;
+};
+
+static inline void
+rta_program_cntxt_init(struct program *program,
+ uint32_t *buffer, unsigned int offset)
+{
+ program->current_pc = 0;
+ program->current_instruction = 0;
+ program->first_error_pc = 0;
+ program->start_pc = offset;
+ program->buffer = buffer;
+ program->shrhdr = NULL;
+ program->jobhdr = NULL;
+ program->ps = false;
+ program->bswap = false;
+}
+
+static inline int
+rta_program_finalize(struct program *program)
+{
+ /* Descriptor is usually not allowed to go beyond 64 words size */
+ if (program->current_pc > MAX_CAAM_DESCSIZE)
+ pr_warn("Descriptor Size exceeded max limit of 64 words\n");
+
+ /* Descriptor is erroneous */
+ if (program->first_error_pc) {
+ pr_err("Descriptor creation error\n");
+ return -EINVAL;
+ }
+
+ /* Update descriptor length in shared and job descriptor headers */
+ if (program->shrhdr != NULL)
+ *program->shrhdr |= program->bswap ?
+ swab32(program->current_pc) :
+ program->current_pc;
+ else if (program->jobhdr != NULL)
+ *program->jobhdr |= program->bswap ?
+ swab32(program->current_pc) :
+ program->current_pc;
+
+ return (int)program->current_pc;
+}
+
+static inline unsigned int
+rta_program_set_36bit_addr(struct program *program)
+{
+ program->ps = true;
+ return program->current_pc;
+}
+
+static inline unsigned int
+rta_program_set_bswap(struct program *program)
+{
+ program->bswap = true;
+ return program->current_pc;
+}
+
+static inline void
+__rta_out32(struct program *program, uint32_t val)
+{
+ program->buffer[program->current_pc] = program->bswap ?
+ swab32(val) : val;
+ program->current_pc++;
+}
+
+static inline void
+__rta_out_be32(struct program *program, uint32_t val)
+{
+ program->buffer[program->current_pc] = cpu_to_be32(val);
+ program->current_pc++;
+}
+
+static inline void
+__rta_out_le32(struct program *program, uint32_t val)
+{
+ program->buffer[program->current_pc] = cpu_to_le32(val);
+ program->current_pc++;
+}
+
+static inline void
+__rta_out64(struct program *program, bool is_ext, uint64_t val)
+{
+ if (is_ext) {
+ /*
+ * Since we are guaranteed only a 4-byte alignment in the
+ * descriptor buffer, we have to do 2 x 32-bit (word) writes.
+ * For the order of the 2 words to be correct, we need to
+ * take into account the endianness of the CPU.
+ */
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ __rta_out32(program, program->bswap ? lower_32_bits(val) :
+ upper_32_bits(val));
+
+ __rta_out32(program, program->bswap ? upper_32_bits(val) :
+ lower_32_bits(val));
+#else
+ __rta_out32(program, program->bswap ? upper_32_bits(val) :
+ lower_32_bits(val));
+
+ __rta_out32(program, program->bswap ? lower_32_bits(val) :
+ upper_32_bits(val));
+#endif
+ } else {
+ __rta_out32(program, lower_32_bits(val));
+ }
+}
+
+static inline unsigned int
+rta_word(struct program *program, uint32_t val)
+{
+ unsigned int start_pc = program->current_pc;
+
+ __rta_out32(program, val);
+
+ return start_pc;
+}
+
+static inline unsigned int
+rta_dword(struct program *program, uint64_t val)
+{
+ unsigned int start_pc = program->current_pc;
+
+ __rta_out64(program, true, val);
+
+ return start_pc;
+}
+
+static inline uint32_t
+inline_flags(enum rta_data_type data_type)
+{
+ switch (data_type) {
+ case RTA_DATA_PTR:
+ return 0;
+ case RTA_DATA_IMM:
+ return IMMED | COPY;
+ case RTA_DATA_IMM_DMA:
+ return IMMED | DCOPY;
+ default:
+ /* warn and default to RTA_DATA_PTR */
+ pr_warn("RTA: defaulting to RTA_DATA_PTR parameter type\n");
+ return 0;
+ }
+}
+
+static inline unsigned int
+rta_copy_data(struct program *program, uint8_t *data, unsigned int length)
+{
+ unsigned int i;
+ unsigned int start_pc = program->current_pc;
+ uint8_t *tmp = (uint8_t *)&program->buffer[program->current_pc];
+
+ for (i = 0; i < length; i++)
+ *tmp++ = data[i];
+ program->current_pc += (length + 3) / 4;
+
+ return start_pc;
+}
+
+#if defined(__EWL__) && defined(AIOP)
+static inline void
+__rta_dma_data(void *ws_dst, uint64_t ext_address, uint16_t size)
+{ cdma_read(ws_dst, ext_address, size); }
+#else
+static inline void
+__rta_dma_data(void *ws_dst __maybe_unused,
+ uint64_t ext_address __maybe_unused,
+ uint16_t size __maybe_unused)
+{ pr_warn("RTA: DCOPY not supported, DMA will be skipped\n"); }
+#endif /* defined(__EWL__) && defined(AIOP) */
+
+static inline void
+__rta_inline_data(struct program *program, uint64_t data,
+ uint32_t copy_data, uint32_t length)
+{
+ if (!copy_data) {
+ __rta_out64(program, length > 4, data);
+ } else if (copy_data & COPY) {
+ uint8_t *tmp = (uint8_t *)&program->buffer[program->current_pc];
+ uint32_t i;
+
+ for (i = 0; i < length; i++)
+ *tmp++ = ((uint8_t *)(uintptr_t)data)[i];
+ program->current_pc += ((length + 3) / 4);
+ } else if (copy_data & DCOPY) {
+ __rta_dma_data(&program->buffer[program->current_pc], data,
+ (uint16_t)length);
+ program->current_pc += ((length + 3) / 4);
+ }
+}
+
+static inline unsigned int
+rta_desc_len(uint32_t *buffer)
+{
+ if ((*buffer & CMD_MASK) == CMD_DESC_HDR)
+ return *buffer & HDR_DESCLEN_MASK;
+ else
+ return *buffer & HDR_DESCLEN_SHR_MASK;
+}
+
+static inline unsigned int
+rta_desc_bytes(uint32_t *buffer)
+{
+ return (unsigned int)(rta_desc_len(buffer) * CAAM_CMD_SZ);
+}
+
+/**
+ * split_key_len - Compute MDHA split key length for a given algorithm
+ * @hash: Hashing algorithm selection, one of OP_ALG_ALGSEL_* or
+ * OP_PCLID_DKP_* - MD5, SHA1, SHA224, SHA256, SHA384, SHA512.
+ *
+ * Return: MDHA split key length
+ */
+static inline uint32_t
+split_key_len(uint32_t hash)
+{
+ /* Sizes for MDHA pads (*not* keys): MD5, SHA1, 224, 256, 384, 512 */
+ static const uint8_t mdpadlen[] = { 16, 20, 32, 32, 64, 64 };
+ uint32_t idx;
+
+ idx = (hash & OP_ALG_ALGSEL_SUBMASK) >> OP_ALG_ALGSEL_SHIFT;
+
+ return (uint32_t)(mdpadlen[idx] * 2);
+}
+
+/**
+ * split_key_pad_len - Compute MDHA split key pad length for a given algorithm
+ * @hash: Hashing algorithm selection, one of OP_ALG_ALGSEL_* - MD5, SHA1,
+ * SHA224, SHA384, SHA512.
+ *
+ * Return: MDHA split key pad length
+ */
+static inline uint32_t
+split_key_pad_len(uint32_t hash)
+{
+ return ALIGN(split_key_len(hash), 16);
+}
+
+static inline unsigned int
+rta_set_label(struct program *program)
+{
+ return program->current_pc + program->start_pc;
+}
+
+static inline int
+rta_patch_move(struct program *program, int line, unsigned int new_ref)
+{
+ uint32_t opcode;
+ bool bswap = program->bswap;
+
+ if (line < 0)
+ return -EINVAL;
+
+ opcode = bswap ? swab32(program->buffer[line]) : program->buffer[line];
+
+ opcode &= (uint32_t)~MOVE_OFFSET_MASK;
+ opcode |= (new_ref << (MOVE_OFFSET_SHIFT + 2)) & MOVE_OFFSET_MASK;
+ program->buffer[line] = bswap ? swab32(opcode) : opcode;
+
+ return 0;
+}
+
+static inline int
+rta_patch_jmp(struct program *program, int line, unsigned int new_ref)
+{
+ uint32_t opcode;
+ bool bswap = program->bswap;
+
+ if (line < 0)
+ return -EINVAL;
+
+ opcode = bswap ? swab32(program->buffer[line]) : program->buffer[line];
+
+ opcode &= (uint32_t)~JUMP_OFFSET_MASK;
+ opcode |= (new_ref - (line + program->start_pc)) & JUMP_OFFSET_MASK;
+ program->buffer[line] = bswap ? swab32(opcode) : opcode;
+
+ return 0;
+}
+
+static inline int
+rta_patch_header(struct program *program, int line, unsigned int new_ref)
+{
+ uint32_t opcode;
+ bool bswap = program->bswap;
+
+ if (line < 0)
+ return -EINVAL;
+
+ opcode = bswap ? swab32(program->buffer[line]) : program->buffer[line];
+
+ opcode &= (uint32_t)~HDR_START_IDX_MASK;
+ opcode |= (new_ref << HDR_START_IDX_SHIFT) & HDR_START_IDX_MASK;
+ program->buffer[line] = bswap ? swab32(opcode) : opcode;
+
+ return 0;
+}
+
+static inline int
+rta_patch_load(struct program *program, int line, unsigned int new_ref)
+{
+ uint32_t opcode;
+ bool bswap = program->bswap;
+
+ if (line < 0)
+ return -EINVAL;
+
+ opcode = (bswap ? swab32(program->buffer[line]) :
+ program->buffer[line]) & (uint32_t)~LDST_OFFSET_MASK;
+
+ if (opcode & (LDST_SRCDST_WORD_DESCBUF | LDST_CLASS_DECO))
+ opcode |= (new_ref << LDST_OFFSET_SHIFT) & LDST_OFFSET_MASK;
+ else
+ opcode |= (new_ref << (LDST_OFFSET_SHIFT + 2)) &
+ LDST_OFFSET_MASK;
+
+ program->buffer[line] = bswap ? swab32(opcode) : opcode;
+
+ return 0;
+}
+
+static inline int
+rta_patch_store(struct program *program, int line, unsigned int new_ref)
+{
+ uint32_t opcode;
+ bool bswap = program->bswap;
+
+ if (line < 0)
+ return -EINVAL;
+
+ opcode = bswap ? swab32(program->buffer[line]) : program->buffer[line];
+
+ opcode &= (uint32_t)~LDST_OFFSET_MASK;
+
+ switch (opcode & LDST_SRCDST_MASK) {
+ case LDST_SRCDST_WORD_DESCBUF:
+ case LDST_SRCDST_WORD_DESCBUF_JOB:
+ case LDST_SRCDST_WORD_DESCBUF_SHARED:
+ case LDST_SRCDST_WORD_DESCBUF_JOB_WE:
+ case LDST_SRCDST_WORD_DESCBUF_SHARED_WE:
+ opcode |= ((new_ref) << LDST_OFFSET_SHIFT) & LDST_OFFSET_MASK;
+ break;
+ default:
+ opcode |= (new_ref << (LDST_OFFSET_SHIFT + 2)) &
+ LDST_OFFSET_MASK;
+ }
+
+ program->buffer[line] = bswap ? swab32(opcode) : opcode;
+
+ return 0;
+}
+
+static inline int
+rta_patch_raw(struct program *program, int line, unsigned int mask,
+ unsigned int new_val)
+{
+ uint32_t opcode;
+ bool bswap = program->bswap;
+
+ if (line < 0)
+ return -EINVAL;
+
+ opcode = bswap ? swab32(program->buffer[line]) : program->buffer[line];
+
+ opcode &= (uint32_t)~mask;
+ opcode |= new_val & mask;
+ program->buffer[line] = bswap ? swab32(opcode) : opcode;
+
+ return 0;
+}
+
+static inline int
+__rta_map_opcode(uint32_t name, const uint32_t (*map_table)[2],
+ unsigned int num_of_entries, uint32_t *val)
+{
+ unsigned int i;
+
+ for (i = 0; i < num_of_entries; i++)
+ if (map_table[i][0] == name) {
+ *val = map_table[i][1];
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline void
+__rta_map_flags(uint32_t flags, const uint32_t (*flags_table)[2],
+ unsigned int num_of_entries, uint32_t *opcode)
+{
+ unsigned int i;
+
+ for (i = 0; i < num_of_entries; i++) {
+ if (flags_table[i][0] & flags)
+ *opcode |= flags_table[i][1];
+ }
+}
+
+#endif /* __RTA_SEC_RUN_TIME_ASM_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/seq_in_out_ptr_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/seq_in_out_ptr_cmd.h
new file mode 100644
index 00000000..8d421a5d
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/seq_in_out_ptr_cmd.h
@@ -0,0 +1,208 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_SEQ_IN_OUT_PTR_CMD_H__
+#define __RTA_SEQ_IN_OUT_PTR_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+/* Allowed SEQ IN PTR flags for each SEC Era. */
+static const uint32_t seq_in_ptr_flags[] = {
+ RBS | INL | SGF | PRE | EXT | RTO,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD | SOP,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD | SOP,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD | SOP,
+ RBS | INL | SGF | PRE | EXT | RTO | RJD | SOP
+};
+
+/* Allowed SEQ OUT PTR flags for each SEC Era. */
+static const uint32_t seq_out_ptr_flags[] = {
+ SGF | PRE | EXT,
+ SGF | PRE | EXT | RTO,
+ SGF | PRE | EXT | RTO,
+ SGF | PRE | EXT | RTO,
+ SGF | PRE | EXT | RTO | RST | EWS,
+ SGF | PRE | EXT | RTO | RST | EWS,
+ SGF | PRE | EXT | RTO | RST | EWS,
+ SGF | PRE | EXT | RTO | RST | EWS
+};
+
+static inline int
+rta_seq_in_ptr(struct program *program, uint64_t src,
+ uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = CMD_SEQ_IN_PTR;
+ unsigned int start_pc = program->current_pc;
+ int ret = -EINVAL;
+
+ /* Parameters checking */
+ if ((flags & RTO) && (flags & PRE)) {
+ pr_err("SEQ IN PTR: Invalid usage of RTO and PRE flags\n");
+ goto err;
+ }
+ if (flags & ~seq_in_ptr_flags[rta_sec_era]) {
+ pr_err("SEQ IN PTR: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+ if ((flags & INL) && (flags & RJD)) {
+ pr_err("SEQ IN PTR: Invalid usage of INL and RJD flags\n");
+ goto err;
+ }
+ if ((src) && (flags & (SOP | RTO | PRE))) {
+ pr_err("SEQ IN PTR: Invalid usage of RTO or PRE flag\n");
+ goto err;
+ }
+ if ((flags & SOP) && (flags & (RBS | PRE | RTO | EXT))) {
+ pr_err("SEQ IN PTR: Invalid usage of SOP and (RBS or PRE or RTO or EXT) flags\n");
+ goto err;
+ }
+
+ /* write flag fields */
+ if (flags & RBS)
+ opcode |= SQIN_RBS;
+ if (flags & INL)
+ opcode |= SQIN_INL;
+ if (flags & SGF)
+ opcode |= SQIN_SGF;
+ if (flags & PRE)
+ opcode |= SQIN_PRE;
+ if (flags & RTO)
+ opcode |= SQIN_RTO;
+ if (flags & RJD)
+ opcode |= SQIN_RJD;
+ if (flags & SOP)
+ opcode |= SQIN_SOP;
+ if ((length >> 16) || (flags & EXT)) {
+ if (flags & SOP) {
+ pr_err("SEQ IN PTR: Invalid usage of SOP and EXT flags\n");
+ goto err;
+ }
+
+ opcode |= SQIN_EXT;
+ } else {
+ opcode |= length & SQIN_LEN_MASK;
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ /* write pointer or immediate data field */
+ if (!(opcode & (SQIN_PRE | SQIN_RTO | SQIN_SOP)))
+ __rta_out64(program, program->ps, src);
+
+ /* write extended length field */
+ if (opcode & SQIN_EXT)
+ __rta_out32(program, length);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+static inline int
+rta_seq_out_ptr(struct program *program, uint64_t dst,
+ uint32_t length, uint32_t flags)
+{
+ uint32_t opcode = CMD_SEQ_OUT_PTR;
+ unsigned int start_pc = program->current_pc;
+ int ret = -EINVAL;
+
+ /* Parameters checking */
+ if (flags & ~seq_out_ptr_flags[rta_sec_era]) {
+ pr_err("SEQ OUT PTR: Flag(s) not supported by SEC Era %d\n",
+ USER_SEC_ERA(rta_sec_era));
+ goto err;
+ }
+ if ((flags & RTO) && (flags & PRE)) {
+ pr_err("SEQ OUT PTR: Invalid usage of RTO and PRE flags\n");
+ goto err;
+ }
+ if ((dst) && (flags & (RTO | PRE))) {
+ pr_err("SEQ OUT PTR: Invalid usage of RTO or PRE flag\n");
+ goto err;
+ }
+ if ((flags & RST) && !(flags & RTO)) {
+ pr_err("SEQ OUT PTR: RST flag must be used with RTO flag\n");
+ goto err;
+ }
+
+ /* write flag fields */
+ if (flags & SGF)
+ opcode |= SQOUT_SGF;
+ if (flags & PRE)
+ opcode |= SQOUT_PRE;
+ if (flags & RTO)
+ opcode |= SQOUT_RTO;
+ if (flags & RST)
+ opcode |= SQOUT_RST;
+ if (flags & EWS)
+ opcode |= SQOUT_EWS;
+ if ((length >> 16) || (flags & EXT))
+ opcode |= SQOUT_EXT;
+ else
+ opcode |= length & SQOUT_LEN_MASK;
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ /* write pointer or immediate data field */
+ if (!(opcode & (SQOUT_PRE | SQOUT_RTO)))
+ __rta_out64(program, program->ps, dst);
+
+ /* write extended length field */
+ if (opcode & SQOUT_EXT)
+ __rta_out32(program, length);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_SEQ_IN_OUT_PTR_CMD_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/signature_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/signature_cmd.h
new file mode 100644
index 00000000..ac4f3ff8
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/signature_cmd.h
@@ -0,0 +1,75 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_SIGNATURE_CMD_H__
+#define __RTA_SIGNATURE_CMD_H__
+
+static inline int
+rta_signature(struct program *program, uint32_t sign_type)
+{
+ uint32_t opcode = CMD_SIGNATURE;
+ unsigned int start_pc = program->current_pc;
+
+ switch (sign_type) {
+ case (SIGN_TYPE_FINAL):
+ case (SIGN_TYPE_FINAL_RESTORE):
+ case (SIGN_TYPE_FINAL_NONZERO):
+ case (SIGN_TYPE_IMM_2):
+ case (SIGN_TYPE_IMM_3):
+ case (SIGN_TYPE_IMM_4):
+ opcode |= sign_type;
+ break;
+ default:
+ pr_err("SIGNATURE Command: Invalid type selection\n");
+ goto err;
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return -EINVAL;
+}
+
+#endif /* __RTA_SIGNATURE_CMD_H__ */
diff --git a/drivers/crypto/dpaa2_sec/hw/rta/store_cmd.h b/drivers/crypto/dpaa2_sec/hw/rta/store_cmd.h
new file mode 100644
index 00000000..8fd01801
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/hw/rta/store_cmd.h
@@ -0,0 +1,185 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2008-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __RTA_STORE_CMD_H__
+#define __RTA_STORE_CMD_H__
+
+extern enum rta_sec_era rta_sec_era;
+
+static const uint32_t store_src_table[][2] = {
+/*1*/ { KEY1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_KEYSZ_REG },
+ { KEY2SZ, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_KEYSZ_REG },
+ { DJQDA, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_JQDAR },
+ { MODE1, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_MODE_REG },
+ { MODE2, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_MODE_REG },
+ { DJQCTRL, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_JQCTRL },
+ { DATA1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_DATASZ_REG },
+ { DATA2SZ, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_DATASZ_REG },
+ { DSTAT, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_STAT },
+ { ICV1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_ICVSZ_REG },
+ { ICV2SZ, LDST_CLASS_2_CCB | LDST_SRCDST_WORD_ICVSZ_REG },
+ { DPID, LDST_CLASS_DECO | LDST_SRCDST_WORD_PID },
+ { CCTRL, LDST_SRCDST_WORD_CHACTRL },
+ { ICTRL, LDST_SRCDST_WORD_IRQCTRL },
+ { CLRW, LDST_SRCDST_WORD_CLRW },
+ { MATH0, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH0 },
+ { CSTAT, LDST_SRCDST_WORD_STAT },
+ { MATH1, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH1 },
+ { MATH2, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH2 },
+ { AAD1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_DECO_AAD_SZ },
+ { MATH3, LDST_CLASS_DECO | LDST_SRCDST_WORD_DECO_MATH3 },
+ { IV1SZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_CLASS1_IV_SZ },
+ { PKASZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_A_SZ },
+ { PKBSZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_B_SZ },
+ { PKESZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_E_SZ },
+ { PKNSZ, LDST_CLASS_1_CCB | LDST_SRCDST_WORD_PKHA_N_SZ },
+ { CONTEXT1, LDST_CLASS_1_CCB | LDST_SRCDST_BYTE_CONTEXT },
+ { CONTEXT2, LDST_CLASS_2_CCB | LDST_SRCDST_BYTE_CONTEXT },
+ { DESCBUF, LDST_CLASS_DECO | LDST_SRCDST_WORD_DESCBUF },
+/*30*/ { JOBDESCBUF, LDST_CLASS_DECO | LDST_SRCDST_WORD_DESCBUF_JOB },
+ { SHAREDESCBUF, LDST_CLASS_DECO | LDST_SRCDST_WORD_DESCBUF_SHARED },
+/*32*/ { JOBDESCBUF_EFF, LDST_CLASS_DECO |
+ LDST_SRCDST_WORD_DESCBUF_JOB_WE },
+ { SHAREDESCBUF_EFF, LDST_CLASS_DECO |
+ LDST_SRCDST_WORD_DESCBUF_SHARED_WE },
+/*34*/ { GTR, LDST_CLASS_DECO | LDST_SRCDST_WORD_GTR },
+ { STR, LDST_CLASS_DECO | LDST_SRCDST_WORD_STR }
+};
+
+/*
+ * Allowed STORE sources for each SEC ERA.
+ * Values represent the number of entries from source_src_table[] that are
+ * supported.
+ */
+static const unsigned int store_src_table_sz[] = {29, 31, 33, 33,
+ 33, 33, 35, 35};
+
+static inline int
+rta_store(struct program *program, uint64_t src,
+ uint16_t offset, uint64_t dst, uint32_t length,
+ uint32_t flags)
+{
+ uint32_t opcode = 0, val;
+ int ret = -EINVAL;
+ unsigned int start_pc = program->current_pc;
+
+ if (flags & SEQ)
+ opcode = CMD_SEQ_STORE;
+ else
+ opcode = CMD_STORE;
+
+ /* parameters check */
+ if ((flags & IMMED) && (flags & SGF)) {
+ pr_err("STORE: Invalid flag. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+ if ((flags & IMMED) && (offset != 0)) {
+ pr_err("STORE: Invalid flag. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ if ((flags & SEQ) && ((src == JOBDESCBUF) || (src == SHAREDESCBUF) ||
+ (src == JOBDESCBUF_EFF) ||
+ (src == SHAREDESCBUF_EFF))) {
+ pr_err("STORE: Invalid SRC type. SEC PC: %d; Instr: %d\n",
+ program->current_pc, program->current_instruction);
+ goto err;
+ }
+
+ if (flags & IMMED)
+ opcode |= LDST_IMM;
+
+ if ((flags & SGF) || (flags & VLF))
+ opcode |= LDST_VLF;
+
+ /*
+ * source for data to be stored can be specified as:
+ * - register location; set in src field[9-15];
+ * - if IMMED flag is set, data is set in value field [0-31];
+ * user can give this value as actual value or pointer to data
+ */
+ if (!(flags & IMMED)) {
+ ret = __rta_map_opcode((uint32_t)src, store_src_table,
+ store_src_table_sz[rta_sec_era], &val);
+ if (ret < 0) {
+ pr_err("STORE: Invalid source. SEC PC: %d; Instr: %d\n",
+ program->current_pc,
+ program->current_instruction);
+ goto err;
+ }
+ opcode |= val;
+ }
+
+ /* DESC BUFFER: length / offset values are specified in 4-byte words */
+ if ((src == DESCBUF) || (src == JOBDESCBUF) || (src == SHAREDESCBUF) ||
+ (src == JOBDESCBUF_EFF) || (src == SHAREDESCBUF_EFF)) {
+ opcode |= (length >> 2);
+ opcode |= (uint32_t)((offset >> 2) << LDST_OFFSET_SHIFT);
+ } else {
+ opcode |= length;
+ opcode |= (uint32_t)(offset << LDST_OFFSET_SHIFT);
+ }
+
+ __rta_out32(program, opcode);
+ program->current_instruction++;
+
+ if ((src == JOBDESCBUF) || (src == SHAREDESCBUF) ||
+ (src == JOBDESCBUF_EFF) || (src == SHAREDESCBUF_EFF))
+ return (int)start_pc;
+
+ /* for STORE, a pointer to where the data will be stored if needed */
+ if (!(flags & SEQ))
+ __rta_out64(program, program->ps, dst);
+
+ /* for IMMED data, place the data here */
+ if (flags & IMMED)
+ __rta_inline_data(program, src, flags & __COPY_MASK, length);
+
+ return (int)start_pc;
+
+ err:
+ program->first_error_pc = start_pc;
+ program->current_instruction++;
+ return ret;
+}
+
+#endif /* __RTA_STORE_CMD_H__ */
diff --git a/drivers/crypto/dpaa2_sec/mc/dpseci.c b/drivers/crypto/dpaa2_sec/mc/dpseci.c
new file mode 100644
index 00000000..6b3411f0
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/mc/dpseci.c
@@ -0,0 +1,558 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <fsl_mc_sys.h>
+#include <fsl_mc_cmd.h>
+#include <fsl_dpseci.h>
+#include <fsl_dpseci_cmd.h>
+
+int
+dpseci_open(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ int dpseci_id,
+ uint16_t *token)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_OPEN,
+ cmd_flags,
+ 0);
+ DPSECI_CMD_OPEN(cmd, dpseci_id);
+
+ /* send command to mc */
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ *token = MC_CMD_HDR_READ_TOKEN(cmd.header);
+
+ return 0;
+}
+
+int
+dpseci_close(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_CLOSE,
+ cmd_flags,
+ token);
+
+ /* send command to mc */
+ return mc_send_command(mc_io, &cmd);
+}
+
+int
+dpseci_create(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ const struct dpseci_cfg *cfg,
+ uint32_t *obj_id)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_CREATE,
+ cmd_flags,
+ dprc_token);
+ DPSECI_CMD_CREATE(cmd, cfg);
+
+ /* send command to mc */
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ CMD_CREATE_RSP_GET_OBJ_ID_PARAM0(cmd, *obj_id);
+
+ return 0;
+}
+
+int
+dpseci_destroy(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ uint32_t object_id)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_DESTROY,
+ cmd_flags,
+ dprc_token);
+ /* set object id to destroy */
+ CMD_DESTROY_SET_OBJ_ID_PARAM0(cmd, object_id);
+ /* send command to mc */
+ return mc_send_command(mc_io, &cmd);
+}
+
+int
+dpseci_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_ENABLE,
+ cmd_flags,
+ token);
+
+ /* send command to mc */
+ return mc_send_command(mc_io, &cmd);
+}
+
+int
+dpseci_disable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_DISABLE,
+ cmd_flags,
+ token);
+
+ /* send command to mc */
+ return mc_send_command(mc_io, &cmd);
+}
+
+int
+dpseci_is_enabled(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int *en)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_IS_ENABLED,
+ cmd_flags,
+ token);
+
+ /* send command to mc */
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_IS_ENABLED(cmd, *en);
+
+ return 0;
+}
+
+int
+dpseci_reset(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_RESET,
+ cmd_flags,
+ token);
+
+ /* send command to mc */
+ return mc_send_command(mc_io, &cmd);
+}
+
+int
+dpseci_get_irq(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ int *type,
+ struct dpseci_irq_cfg *irq_cfg)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_IRQ,
+ cmd_flags,
+ token);
+ DPSECI_CMD_GET_IRQ(cmd, irq_index);
+
+ /* send command to mc */
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_IRQ(cmd, *type, irq_cfg);
+
+ return 0;
+}
+
+int
+dpseci_set_irq(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ struct dpseci_irq_cfg *irq_cfg)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_SET_IRQ,
+ cmd_flags,
+ token);
+ DPSECI_CMD_SET_IRQ(cmd, irq_index, irq_cfg);
+
+ /* send command to mc */
+ return mc_send_command(mc_io, &cmd);
+}
+
+int
+dpseci_get_irq_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint8_t *en)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_IRQ_ENABLE,
+ cmd_flags,
+ token);
+ DPSECI_CMD_GET_IRQ_ENABLE(cmd, irq_index);
+
+ /* send command to mc */
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_IRQ_ENABLE(cmd, *en);
+
+ return 0;
+}
+
+int
+dpseci_set_irq_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint8_t en)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_SET_IRQ_ENABLE,
+ cmd_flags,
+ token);
+ DPSECI_CMD_SET_IRQ_ENABLE(cmd, irq_index, en);
+
+ /* send command to mc */
+ return mc_send_command(mc_io, &cmd);
+}
+
+int
+dpseci_get_irq_mask(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t *mask)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_IRQ_MASK,
+ cmd_flags,
+ token);
+ DPSECI_CMD_GET_IRQ_MASK(cmd, irq_index);
+
+ /* send command to mc */
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_IRQ_MASK(cmd, *mask);
+
+ return 0;
+}
+
+int
+dpseci_set_irq_mask(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t mask)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_SET_IRQ_MASK,
+ cmd_flags,
+ token);
+ DPSECI_CMD_SET_IRQ_MASK(cmd, irq_index, mask);
+
+ /* send command to mc */
+ return mc_send_command(mc_io, &cmd);
+}
+
+int
+dpseci_get_irq_status(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t *status)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_IRQ_STATUS,
+ cmd_flags,
+ token);
+ DPSECI_CMD_GET_IRQ_STATUS(cmd, irq_index, *status);
+
+ /* send command to mc */
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_IRQ_STATUS(cmd, *status);
+
+ return 0;
+}
+
+int
+dpseci_clear_irq_status(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t status)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_CLEAR_IRQ_STATUS,
+ cmd_flags,
+ token);
+ DPSECI_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status);
+
+ /* send command to mc */
+ return mc_send_command(mc_io, &cmd);
+}
+
+int
+dpseci_get_attributes(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpseci_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_ATTR,
+ cmd_flags,
+ token);
+
+ /* send command to mc */
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_ATTR(cmd, attr);
+
+ return 0;
+}
+
+int
+dpseci_set_rx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t queue,
+ const struct dpseci_rx_queue_cfg *cfg)
+{
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_SET_RX_QUEUE,
+ cmd_flags,
+ token);
+ DPSECI_CMD_SET_RX_QUEUE(cmd, queue, cfg);
+
+ /* send command to mc */
+ return mc_send_command(mc_io, &cmd);
+}
+
+int
+dpseci_get_rx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t queue,
+ struct dpseci_rx_queue_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_RX_QUEUE,
+ cmd_flags,
+ token);
+ DPSECI_CMD_GET_RX_QUEUE(cmd, queue);
+
+ /* send command to mc */
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_RX_QUEUE(cmd, attr);
+
+ return 0;
+}
+
+int
+dpseci_get_tx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t queue,
+ struct dpseci_tx_queue_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_TX_QUEUE,
+ cmd_flags,
+ token);
+ DPSECI_CMD_GET_TX_QUEUE(cmd, queue);
+
+ /* send command to mc */
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_TX_QUEUE(cmd, attr);
+
+ return 0;
+}
+
+int
+dpseci_get_sec_attr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpseci_sec_attr *attr)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_SEC_ATTR,
+ cmd_flags,
+ token);
+
+ /* send command to mc */
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_SEC_ATTR(cmd, attr);
+
+ return 0;
+}
+
+int
+dpseci_get_sec_counters(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpseci_sec_counters *counters)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_SEC_COUNTERS,
+ cmd_flags,
+ token);
+
+ /* send command to mc */
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ DPSECI_RSP_GET_SEC_COUNTERS(cmd, counters);
+
+ return 0;
+}
+
+int
+dpseci_get_api_version(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t *major_ver,
+ uint16_t *minor_ver)
+{
+ struct mc_command cmd = { 0 };
+ int err;
+
+ cmd.header = mc_encode_cmd_header(DPSECI_CMDID_GET_API_VERSION,
+ cmd_flags,
+ 0);
+
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ DPSECI_RSP_GET_API_VERSION(cmd, *major_ver, *minor_ver);
+
+ return 0;
+}
diff --git a/drivers/crypto/dpaa2_sec/mc/fsl_dpseci.h b/drivers/crypto/dpaa2_sec/mc/fsl_dpseci.h
new file mode 100644
index 00000000..0fb47f73
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/mc/fsl_dpseci.h
@@ -0,0 +1,746 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __FSL_DPSECI_H
+#define __FSL_DPSECI_H
+
+/* Data Path SEC Interface API
+ * Contains initialization APIs and runtime control APIs for DPSECI
+ */
+
+struct fsl_mc_io;
+
+/**
+ * General DPSECI macros
+ */
+
+/**
+ * Maximum number of Tx/Rx priorities per DPSECI object
+ */
+#define DPSECI_PRIO_NUM 8
+
+/**
+ * All queues considered; see dpseci_set_rx_queue()
+ */
+#define DPSECI_ALL_QUEUES (uint8_t)(-1)
+
+/**
+ * dpseci_open() - Open a control session for the specified object
+ * This function can be used to open a control session for an
+ * already created object; an object may have been declared in
+ * the DPL or by calling the dpseci_create() function.
+ * This function returns a unique authentication token,
+ * associated with the specific object ID and the specific MC
+ * portal; this token must be used in all subsequent commands for
+ * this specific object.
+ *
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param dpseci_id DPSECI unique ID
+ * @param token Returned token; use in subsequent API calls
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_open(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ int dpseci_id,
+ uint16_t *token);
+
+/**
+ * dpseci_close() - Close the control session of the object
+ * After this function is called, no further operations are
+ * allowed on the object without opening a new control session.
+ *
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_close(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * struct dpseci_cfg - Structure representing DPSECI configuration
+ */
+struct dpseci_cfg {
+ uint8_t num_tx_queues; /* num of queues towards the SEC */
+ uint8_t num_rx_queues; /* num of queues back from the SEC */
+ uint8_t priorities[DPSECI_PRIO_NUM];
+ /**< Priorities for the SEC hardware processing;
+ * each place in the array is the priority of the tx queue
+ * towards the SEC,
+ * valid priorities are configured with values 1-8;
+ */
+};
+
+/**
+ * dpseci_create() - Create the DPSECI object
+ * Create the DPSECI object, allocate required resources and
+ * perform required initialization.
+ *
+ * The object can be created either by declaring it in the
+ * DPL file, or by calling this function.
+ *
+ * The function accepts an authentication token of a parent
+ * container that this object should be assigned to. The token
+ * can be '0' so the object will be assigned to the default container.
+ * The newly created object can be opened with the returned
+ * object id and using the container's associated tokens and MC portals.
+ *
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param dprc_token Parent container token; '0' for default container
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param cfg Configuration structure
+ * @param obj_id returned object id
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_create(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ const struct dpseci_cfg *cfg,
+ uint32_t *obj_id);
+
+/**
+ * dpseci_destroy() - Destroy the DPSECI object and release all its resources.
+ * The function accepts the authentication token of the parent container that
+ * created the object (not the one that currently owns the object). The object
+ * is searched within parent using the provided 'object_id'.
+ * All tokens to the object must be closed before calling destroy.
+ *
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param dprc_token Parent container token; '0' for default container
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param object_id The object id; it must be a valid id within the
+ * container that created this object;
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_destroy(struct fsl_mc_io *mc_io,
+ uint16_t dprc_token,
+ uint32_t cmd_flags,
+ uint32_t object_id);
+
+/**
+ * dpseci_enable() - Enable the DPSECI, allow sending and receiving frames.
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * dpseci_disable() - Disable the DPSECI, stop sending and receiving frames.
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_disable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * dpseci_is_enabled() - Check if the DPSECI is enabled.
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param en Returns '1' if object is enabled; '0' otherwise
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_is_enabled(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int *en);
+
+/**
+ * dpseci_reset() - Reset the DPSECI, returns the object to initial state.
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_reset(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token);
+
+/**
+ * struct dpseci_irq_cfg - IRQ configuration
+ */
+struct dpseci_irq_cfg {
+ uint64_t addr;
+ /* Address that must be written to signal a message-based interrupt */
+ uint32_t val;
+ /* Value to write into irq_addr address */
+ int irq_num;
+ /* A user defined number associated with this IRQ */
+};
+
+/**
+ * dpseci_set_irq() - Set IRQ information for the DPSECI to trigger an interrupt
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param irq_index Identifies the interrupt index to configure
+ * @param irq_cfg IRQ configuration
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_set_irq(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ struct dpseci_irq_cfg *irq_cfg);
+
+/**
+ * dpseci_get_irq() - Get IRQ information from the DPSECI
+ *
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param irq_index The interrupt index to configure
+ * @param type Interrupt type: 0 represents message interrupt
+ * type (both irq_addr and irq_val are valid)
+ * @param irq_cfg IRQ attributes
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_get_irq(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ int *type,
+ struct dpseci_irq_cfg *irq_cfg);
+
+/**
+ * dpseci_set_irq_enable() - Set overall interrupt state.
+ * Allows GPP software to control when interrupts are generated.
+ * Each interrupt can have up to 32 causes. The enable/disable control's the
+ * overall interrupt state. if the interrupt is disabled no causes will cause
+ * an interrupt
+ *
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param irq_index The interrupt index to configure
+ * @param en Interrupt state - enable = 1, disable = 0
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_set_irq_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint8_t en);
+
+/**
+ * dpseci_get_irq_enable() - Get overall interrupt state
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param irq_index The interrupt index to configure
+ * @param en Returned Interrupt state - enable = 1,
+ * disable = 0
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_get_irq_enable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint8_t *en);
+
+/**
+ * dpseci_set_irq_mask() - Set interrupt mask.
+ * Every interrupt can have up to 32 causes and the interrupt model supports
+ * masking/unmasking each cause independently
+ *
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param irq_index The interrupt index to configure
+ * @param mask event mask to trigger interrupt;
+ * each bit:
+ * 0 = ignore event
+ * 1 = consider event for asserting IRQ
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_set_irq_mask(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t mask);
+
+/**
+ * dpseci_get_irq_mask() - Get interrupt mask.
+ * Every interrupt can have up to 32 causes and the interrupt model supports
+ * masking/unmasking each cause independently
+ *
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param irq_index The interrupt index to configure
+ * @param mask Returned event mask to trigger interrupt
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_get_irq_mask(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t *mask);
+
+/**
+ * dpseci_get_irq_status() - Get the current status of any pending interrupts
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param irq_index The interrupt index to configure
+ * @param status Returned interrupts status - one bit per cause:
+ * 0 = no interrupt pending
+ * 1 = interrupt pending
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_get_irq_status(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t *status);
+
+/**
+ * dpseci_clear_irq_status() - Clear a pending interrupt's status
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param irq_index The interrupt index to configure
+ * @param status bits to clear (W1C) - one bit per cause:
+ * 0 = don't change
+ * 1 = clear status bit
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_clear_irq_status(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t irq_index,
+ uint32_t status);
+
+/**
+ * struct dpseci_attr - Structure representing DPSECI attributes
+ * @param id: DPSECI object ID
+ * @param num_tx_queues: number of queues towards the SEC
+ * @param num_rx_queues: number of queues back from the SEC
+ */
+struct dpseci_attr {
+ int id; /* DPSECI object ID */
+ uint8_t num_tx_queues; /* number of queues towards the SEC */
+ uint8_t num_rx_queues; /* number of queues back from the SEC */
+};
+
+/**
+ * dpseci_get_attributes() - Retrieve DPSECI attributes.
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param attr Returned object's attributes
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_get_attributes(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpseci_attr *attr);
+
+/**
+ * enum dpseci_dest - DPSECI destination types
+ * @DPSECI_DEST_NONE: Unassigned destination; The queue is set in parked mode
+ * and does not generate FQDAN notifications; user is expected to
+ * dequeue from the queue based on polling or other user-defined
+ * method
+ * @DPSECI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN
+ * notifications to the specified DPIO; user is expected to dequeue
+ * from the queue only after notification is received
+ * @DPSECI_DEST_DPCON: The queue is set in schedule mode and does not generate
+ * FQDAN notifications, but is connected to the specified DPCON
+ * object; user is expected to dequeue from the DPCON channel
+ */
+enum dpseci_dest {
+ DPSECI_DEST_NONE = 0,
+ DPSECI_DEST_DPIO = 1,
+ DPSECI_DEST_DPCON = 2
+};
+
+/**
+ * struct dpseci_dest_cfg - Structure representing DPSECI destination parameters
+ */
+struct dpseci_dest_cfg {
+ enum dpseci_dest dest_type; /* Destination type */
+ int dest_id;
+ /* Either DPIO ID or DPCON ID, depending on the destination type */
+ uint8_t priority;
+ /* Priority selection within the DPIO or DPCON channel; valid values
+ * are 0-1 or 0-7, depending on the number of priorities in that
+ * channel; not relevant for 'DPSECI_DEST_NONE' option
+ */
+};
+
+/**
+ * DPSECI queue modification options
+ */
+
+/**
+ * Select to modify the user's context associated with the queue
+ */
+#define DPSECI_QUEUE_OPT_USER_CTX 0x00000001
+
+/**
+ * Select to modify the queue's destination
+ */
+#define DPSECI_QUEUE_OPT_DEST 0x00000002
+
+/**
+ * Select to modify the queue's order preservation
+ */
+#define DPSECI_QUEUE_OPT_ORDER_PRESERVATION 0x00000004
+
+/**
+ * struct dpseci_rx_queue_cfg - DPSECI RX queue configuration
+ */
+struct dpseci_rx_queue_cfg {
+ uint32_t options;
+ /* Flags representing the suggested modifications to the queue;
+ * Use any combination of 'DPSECI_QUEUE_OPT_<X>' flags
+ */
+ int order_preservation_en;
+ /* order preservation configuration for the rx queue
+ * valid only if 'DPSECI_QUEUE_OPT_ORDER_PRESERVATION' is contained in
+ * 'options'
+ */
+ uint64_t user_ctx;
+ /* User context value provided in the frame descriptor of each
+ * dequeued frame;
+ * valid only if 'DPSECI_QUEUE_OPT_USER_CTX' is contained in 'options'
+ */
+ struct dpseci_dest_cfg dest_cfg;
+ /* Queue destination parameters;
+ * valid only if 'DPSECI_QUEUE_OPT_DEST' is contained in 'options'
+ */
+};
+
+/**
+ * dpseci_set_rx_queue() - Set Rx queue configuration
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param queue Select the queue relative to number of
+ * priorities configured at DPSECI creation; use
+ * DPSECI_ALL_QUEUES to configure all Rx queues
+ * identically.
+ * @param cfg Rx queue configuration
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_set_rx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t queue,
+ const struct dpseci_rx_queue_cfg *cfg);
+
+/**
+ * struct dpseci_rx_queue_attr - Structure representing attributes of Rx queues
+ */
+struct dpseci_rx_queue_attr {
+ uint64_t user_ctx;
+ /* User context value provided in the frame descriptor of
+ * each dequeued frame
+ */
+ int order_preservation_en;
+ /* Status of the order preservation configuration on the queue */
+ struct dpseci_dest_cfg dest_cfg;
+ /* Queue destination configuration */
+ uint32_t fqid;
+ /* Virtual FQID value to be used for dequeue operations */
+};
+
+/**
+ * dpseci_get_rx_queue() - Retrieve Rx queue attributes.
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param queue Select the queue relative to number of
+ * priorities configured at DPSECI creation
+ * @param attr Returned Rx queue attributes
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_get_rx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t queue,
+ struct dpseci_rx_queue_attr *attr);
+
+/**
+ * struct dpseci_tx_queue_attr - Structure representing attributes of Tx queues
+ */
+struct dpseci_tx_queue_attr {
+ uint32_t fqid;
+ /* Virtual FQID to be used for sending frames to SEC hardware */
+ uint8_t priority;
+ /* SEC hardware processing priority for the queue */
+};
+
+/**
+ * dpseci_get_tx_queue() - Retrieve Tx queue attributes.
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param queue Select the queue relative to number of
+ * priorities configured at DPSECI creation
+ * @param attr Returned Tx queue attributes
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_get_tx_queue(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t queue,
+ struct dpseci_tx_queue_attr *attr);
+
+/**
+ * struct dpseci_sec_attr - Structure representing attributes of the SEC
+ * hardware accelerator
+ */
+
+struct dpseci_sec_attr {
+ uint16_t ip_id; /* ID for SEC */
+ uint8_t major_rev; /* Major revision number for SEC */
+ uint8_t minor_rev; /* Minor revision number for SEC */
+ uint8_t era; /* SEC Era */
+ uint8_t deco_num;
+ /* The number of copies of the DECO that are implemented in
+ * this version of SEC
+ */
+ uint8_t zuc_auth_acc_num;
+ /* The number of copies of ZUCA that are implemented in this
+ * version of SEC
+ */
+ uint8_t zuc_enc_acc_num;
+ /* The number of copies of ZUCE that are implemented in this
+ * version of SEC
+ */
+ uint8_t snow_f8_acc_num;
+ /* The number of copies of the SNOW-f8 module that are
+ * implemented in this version of SEC
+ */
+ uint8_t snow_f9_acc_num;
+ /* The number of copies of the SNOW-f9 module that are
+ * implemented in this version of SEC
+ */
+ uint8_t crc_acc_num;
+ /* The number of copies of the CRC module that are implemented
+ * in this version of SEC
+ */
+ uint8_t pk_acc_num;
+ /* The number of copies of the Public Key module that are
+ * implemented in this version of SEC
+ */
+ uint8_t kasumi_acc_num;
+ /* The number of copies of the Kasumi module that are
+ * implemented in this version of SEC
+ */
+ uint8_t rng_acc_num;
+ /* The number of copies of the Random Number Generator that are
+ * implemented in this version of SEC
+ */
+ uint8_t md_acc_num;
+ /* The number of copies of the MDHA (Hashing module) that are
+ * implemented in this version of SEC
+ */
+ uint8_t arc4_acc_num;
+ /* The number of copies of the ARC4 module that are implemented
+ * in this version of SEC
+ */
+ uint8_t des_acc_num;
+ /* The number of copies of the DES module that are implemented
+ * in this version of SEC
+ */
+ uint8_t aes_acc_num;
+ /* The number of copies of the AES module that are implemented
+ * in this version of SEC
+ */
+};
+
+/**
+ * dpseci_get_sec_attr() - Retrieve SEC accelerator attributes.
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param attr Returned SEC attributes
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_get_sec_attr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpseci_sec_attr *attr);
+
+/**
+ * struct dpseci_sec_counters - Structure representing global SEC counters and
+ * not per dpseci counters
+ */
+struct dpseci_sec_counters {
+ uint64_t dequeued_requests; /* Number of Requests Dequeued */
+ uint64_t ob_enc_requests; /* Number of Outbound Encrypt Requests */
+ uint64_t ib_dec_requests; /* Number of Inbound Decrypt Requests */
+ uint64_t ob_enc_bytes; /* Number of Outbound Bytes Encrypted */
+ uint64_t ob_prot_bytes; /* Number of Outbound Bytes Protected */
+ uint64_t ib_dec_bytes; /* Number of Inbound Bytes Decrypted */
+ uint64_t ib_valid_bytes; /* Number of Inbound Bytes Validated */
+};
+
+/**
+ * dpseci_get_sec_counters() - Retrieve SEC accelerator counters.
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param token Token of DPSECI object
+ * @param counters Returned SEC counters
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_get_sec_counters(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpseci_sec_counters *counters);
+
+/**
+ * dpseci_get_api_version() - Get Data Path SEC Interface API version
+ * @param mc_io Pointer to MC portal's I/O object
+ * @param cmd_flags Command flags; one or more of 'MC_CMD_FLAG_'
+ * @param major_ver Major version of data path sec API
+ * @param minor_ver Minor version of data path sec API
+ *
+ * @return:
+ * - Return '0' on Success.
+ * - Return Error code otherwise.
+ */
+int
+dpseci_get_api_version(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t *major_ver,
+ uint16_t *minor_ver);
+
+#endif /* __FSL_DPSECI_H */
diff --git a/drivers/crypto/dpaa2_sec/mc/fsl_dpseci_cmd.h b/drivers/crypto/dpaa2_sec/mc/fsl_dpseci_cmd.h
new file mode 100644
index 00000000..1fb18cc3
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/mc/fsl_dpseci_cmd.h
@@ -0,0 +1,256 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * BSD LICENSE
+ *
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ * Copyright (c) 2016 NXP.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of the above-listed copyright holders nor the
+ * names of any contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FSL_DPSECI_CMD_H
+#define _FSL_DPSECI_CMD_H
+
+/* DPSECI Version */
+#define DPSECI_VER_MAJOR 5
+#define DPSECI_VER_MINOR 0
+
+/* Command IDs */
+#define DPSECI_CMDID_CLOSE ((0x800 << 4) | (0x1))
+#define DPSECI_CMDID_OPEN ((0x809 << 4) | (0x1))
+#define DPSECI_CMDID_CREATE ((0x909 << 4) | (0x1))
+#define DPSECI_CMDID_DESTROY ((0x989 << 4) | (0x1))
+#define DPSECI_CMDID_GET_API_VERSION ((0xa09 << 4) | (0x1))
+
+#define DPSECI_CMDID_ENABLE ((0x002 << 4) | (0x1))
+#define DPSECI_CMDID_DISABLE ((0x003 << 4) | (0x1))
+#define DPSECI_CMDID_GET_ATTR ((0x004 << 4) | (0x1))
+#define DPSECI_CMDID_RESET ((0x005 << 4) | (0x1))
+#define DPSECI_CMDID_IS_ENABLED ((0x006 << 4) | (0x1))
+
+#define DPSECI_CMDID_SET_IRQ ((0x010 << 4) | (0x1))
+#define DPSECI_CMDID_GET_IRQ ((0x011 << 4) | (0x1))
+#define DPSECI_CMDID_SET_IRQ_ENABLE ((0x012 << 4) | (0x1))
+#define DPSECI_CMDID_GET_IRQ_ENABLE ((0x013 << 4) | (0x1))
+#define DPSECI_CMDID_SET_IRQ_MASK ((0x014 << 4) | (0x1))
+#define DPSECI_CMDID_GET_IRQ_MASK ((0x015 << 4) | (0x1))
+#define DPSECI_CMDID_GET_IRQ_STATUS ((0x016 << 4) | (0x1))
+#define DPSECI_CMDID_CLEAR_IRQ_STATUS ((0x017 << 4) | (0x1))
+
+#define DPSECI_CMDID_SET_RX_QUEUE ((0x194 << 4) | (0x1))
+#define DPSECI_CMDID_GET_RX_QUEUE ((0x196 << 4) | (0x1))
+#define DPSECI_CMDID_GET_TX_QUEUE ((0x197 << 4) | (0x1))
+#define DPSECI_CMDID_GET_SEC_ATTR ((0x198 << 4) | (0x1))
+#define DPSECI_CMDID_GET_SEC_COUNTERS ((0x199 << 4) | (0x1))
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_OPEN(cmd, dpseci_id) \
+ MC_CMD_OP(cmd, 0, 0, 32, int, dpseci_id)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_CREATE(cmd, cfg) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, cfg->priorities[0]);\
+ MC_CMD_OP(cmd, 0, 8, 8, uint8_t, cfg->priorities[1]);\
+ MC_CMD_OP(cmd, 0, 16, 8, uint8_t, cfg->priorities[2]);\
+ MC_CMD_OP(cmd, 0, 24, 8, uint8_t, cfg->priorities[3]);\
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->priorities[4]);\
+ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, cfg->priorities[5]);\
+ MC_CMD_OP(cmd, 0, 48, 8, uint8_t, cfg->priorities[6]);\
+ MC_CMD_OP(cmd, 0, 56, 8, uint8_t, cfg->priorities[7]);\
+ MC_CMD_OP(cmd, 1, 0, 8, uint8_t, cfg->num_tx_queues);\
+ MC_CMD_OP(cmd, 1, 8, 8, uint8_t, cfg->num_rx_queues);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_IS_ENABLED(cmd, en) \
+ MC_RSP_OP(cmd, 0, 0, 1, int, en)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_SET_IRQ(cmd, irq_index, irq_cfg) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, irq_index);\
+ MC_CMD_OP(cmd, 0, 32, 32, uint32_t, irq_cfg->val);\
+ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr);\
+ MC_CMD_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_GET_IRQ(cmd, irq_index) \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_IRQ(cmd, type, irq_cfg) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, irq_cfg->val); \
+ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, irq_cfg->addr);\
+ MC_RSP_OP(cmd, 2, 0, 32, int, irq_cfg->irq_num); \
+ MC_RSP_OP(cmd, 2, 32, 32, int, type); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_SET_IRQ_ENABLE(cmd, irq_index, enable_state) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 8, uint8_t, enable_state); \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_GET_IRQ_ENABLE(cmd, irq_index) \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_IRQ_ENABLE(cmd, enable_state) \
+ MC_RSP_OP(cmd, 0, 0, 8, uint8_t, enable_state)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_SET_IRQ_MASK(cmd, irq_index, mask) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, mask); \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_GET_IRQ_MASK(cmd, irq_index) \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_IRQ_MASK(cmd, mask) \
+ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, mask)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_GET_IRQ_STATUS(cmd, irq_index, status) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status);\
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_IRQ_STATUS(cmd, status) \
+ MC_RSP_OP(cmd, 0, 0, 32, uint32_t, status)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_CLEAR_IRQ_STATUS(cmd, irq_index, status) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, uint32_t, status); \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, irq_index); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_ATTR(cmd, attr) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 32, int, attr->id); \
+ MC_RSP_OP(cmd, 1, 0, 8, uint8_t, attr->num_tx_queues); \
+ MC_RSP_OP(cmd, 1, 8, 8, uint8_t, attr->num_rx_queues); \
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_SET_RX_QUEUE(cmd, queue, cfg) \
+do { \
+ MC_CMD_OP(cmd, 0, 0, 32, int, cfg->dest_cfg.dest_id); \
+ MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->dest_cfg.priority); \
+ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, queue); \
+ MC_CMD_OP(cmd, 0, 48, 4, enum dpseci_dest, cfg->dest_cfg.dest_type); \
+ MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->user_ctx); \
+ MC_CMD_OP(cmd, 2, 0, 32, uint32_t, cfg->options);\
+ MC_CMD_OP(cmd, 2, 32, 1, int, cfg->order_preservation_en);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_GET_RX_QUEUE(cmd, queue) \
+ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, queue)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_RX_QUEUE(cmd, attr) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 32, int, attr->dest_cfg.dest_id);\
+ MC_RSP_OP(cmd, 0, 32, 8, uint8_t, attr->dest_cfg.priority);\
+ MC_RSP_OP(cmd, 0, 48, 4, enum dpseci_dest, attr->dest_cfg.dest_type);\
+ MC_RSP_OP(cmd, 1, 0, 8, uint64_t, attr->user_ctx);\
+ MC_RSP_OP(cmd, 2, 0, 32, uint32_t, attr->fqid);\
+ MC_RSP_OP(cmd, 2, 32, 1, int, attr->order_preservation_en);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_CMD_GET_TX_QUEUE(cmd, queue) \
+ MC_CMD_OP(cmd, 0, 40, 8, uint8_t, queue)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_TX_QUEUE(cmd, attr) \
+do { \
+ MC_RSP_OP(cmd, 0, 32, 32, uint32_t, attr->fqid);\
+ MC_RSP_OP(cmd, 1, 0, 8, uint8_t, attr->priority);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_SEC_ATTR(cmd, attr) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, attr->ip_id);\
+ MC_RSP_OP(cmd, 0, 16, 8, uint8_t, attr->major_rev);\
+ MC_RSP_OP(cmd, 0, 24, 8, uint8_t, attr->minor_rev);\
+ MC_RSP_OP(cmd, 0, 32, 8, uint8_t, attr->era);\
+ MC_RSP_OP(cmd, 1, 0, 8, uint8_t, attr->deco_num);\
+ MC_RSP_OP(cmd, 1, 8, 8, uint8_t, attr->zuc_auth_acc_num);\
+ MC_RSP_OP(cmd, 1, 16, 8, uint8_t, attr->zuc_enc_acc_num);\
+ MC_RSP_OP(cmd, 1, 32, 8, uint8_t, attr->snow_f8_acc_num);\
+ MC_RSP_OP(cmd, 1, 40, 8, uint8_t, attr->snow_f9_acc_num);\
+ MC_RSP_OP(cmd, 1, 48, 8, uint8_t, attr->crc_acc_num);\
+ MC_RSP_OP(cmd, 2, 0, 8, uint8_t, attr->pk_acc_num);\
+ MC_RSP_OP(cmd, 2, 8, 8, uint8_t, attr->kasumi_acc_num);\
+ MC_RSP_OP(cmd, 2, 16, 8, uint8_t, attr->rng_acc_num);\
+ MC_RSP_OP(cmd, 2, 32, 8, uint8_t, attr->md_acc_num);\
+ MC_RSP_OP(cmd, 2, 40, 8, uint8_t, attr->arc4_acc_num);\
+ MC_RSP_OP(cmd, 2, 48, 8, uint8_t, attr->des_acc_num);\
+ MC_RSP_OP(cmd, 2, 56, 8, uint8_t, attr->aes_acc_num);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_SEC_COUNTERS(cmd, counters) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 64, uint64_t, counters->dequeued_requests);\
+ MC_RSP_OP(cmd, 1, 0, 64, uint64_t, counters->ob_enc_requests);\
+ MC_RSP_OP(cmd, 2, 0, 64, uint64_t, counters->ib_dec_requests);\
+ MC_RSP_OP(cmd, 3, 0, 64, uint64_t, counters->ob_enc_bytes);\
+ MC_RSP_OP(cmd, 4, 0, 64, uint64_t, counters->ob_prot_bytes);\
+ MC_RSP_OP(cmd, 5, 0, 64, uint64_t, counters->ib_dec_bytes);\
+ MC_RSP_OP(cmd, 6, 0, 64, uint64_t, counters->ib_valid_bytes);\
+} while (0)
+
+/* cmd, param, offset, width, type, arg_name */
+#define DPSECI_RSP_GET_API_VERSION(cmd, major, minor) \
+do { \
+ MC_RSP_OP(cmd, 0, 0, 16, uint16_t, major);\
+ MC_RSP_OP(cmd, 0, 16, 16, uint16_t, minor);\
+} while (0)
+
+#endif /* _FSL_DPSECI_CMD_H */
diff --git a/drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map b/drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map
new file mode 100644
index 00000000..8591cc0b
--- /dev/null
+++ b/drivers/crypto/dpaa2_sec/rte_pmd_dpaa2_sec_version.map
@@ -0,0 +1,4 @@
+DPDK_17.05 {
+
+ local: *;
+};