summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x/bnx2x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x/bnx2x.c')
-rw-r--r--drivers/net/bnx2x/bnx2x.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/drivers/net/bnx2x/bnx2x.c b/drivers/net/bnx2x/bnx2x.c
index 1a7e1c8e..06733d15 100644
--- a/drivers/net/bnx2x/bnx2x.c
+++ b/drivers/net/bnx2x/bnx2x.c
@@ -120,7 +120,7 @@ static int bnx2x_alloc_mem(struct bnx2x_softc *sc);
static void bnx2x_free_mem(struct bnx2x_softc *sc);
static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc);
static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc);
-static __attribute__ ((noinline))
+static __rte_noinline
int bnx2x_nic_load(struct bnx2x_softc *sc);
static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc);
@@ -887,7 +887,7 @@ storm_memset_eq_prod(struct bnx2x_softc *sc, uint16_t eq_prod, uint16_t pfid)
/*
* Post a slowpath command.
*
- * A slowpath command is used to propogate a configuration change through
+ * A slowpath command is used to propagate a configuration change through
* the controller in a controlled manner, allowing each STORM processor and
* other H/W blocks to phase in the change. The commands sent on the
* slowpath are referred to as ramrods. Depending on the ramrod used the
@@ -1962,7 +1962,7 @@ static void bnx2x_squeeze_objects(struct bnx2x_softc *sc)
}
/* stop the controller */
-__attribute__ ((noinline))
+__rte_noinline
int
bnx2x_nic_unload(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
{
@@ -2002,7 +2002,7 @@ bnx2x_nic_unload(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link
/*
* Nothing to do during unload if previous bnx2x_nic_load()
- * did not completed succesfully - all resourses are released.
+ * did not completed successfully - all resourses are released.
*/
if ((sc->state == BNX2X_STATE_CLOSED) || (sc->state == BNX2X_STATE_ERROR)) {
return 0;
@@ -3931,7 +3931,7 @@ static void bnx2x_attn_int_deasserted2(struct bnx2x_softc *sc, uint32_t attn)
mask1 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_1);
val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_0);
/*
- * If the olny PXP2_EOP_ERROR_BIT is set in
+ * If the only PXP2_EOP_ERROR_BIT is set in
* STS0 and STS1 - clear it
*
* probably we lose additional attentions between
@@ -5910,7 +5910,7 @@ static void bnx2x_set_234_gates(struct bnx2x_softc *sc, uint8_t close)
(val | HC_CONFIG_0_REG_BLOCK_DISABLE_0));
} else {
-/* Prevent incomming interrupts in IGU */
+/* Prevent incoming interrupts in IGU */
val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
if (close)
@@ -7124,7 +7124,7 @@ void bnx2x_periodic_callout(struct bnx2x_softc *sc)
}
/* start the controller */
-static __attribute__ ((noinline))
+static __rte_noinline
int bnx2x_nic_load(struct bnx2x_softc *sc)
{
uint32_t val;