diff options
Diffstat (limited to 'drivers/net/bnx2x/elink.c')
| -rw-r--r-- | drivers/net/bnx2x/elink.c | 13357 |
1 files changed, 13357 insertions, 0 deletions
diff --git a/drivers/net/bnx2x/elink.c b/drivers/net/bnx2x/elink.c new file mode 100644 index 00000000..b9149b89 --- /dev/null +++ b/drivers/net/bnx2x/elink.c @@ -0,0 +1,13357 @@ +/* + * Copyright (c) 2007-2013 QLogic Corporation. All rights reserved. + * + * Eric Davis <edavis@broadcom.com> + * David Christensen <davidch@broadcom.com> + * Gary Zambrano <zambrano@broadcom.com> + * + * Copyright (c) 2013-2015 Brocade Communications Systems, Inc. + * Copyright (c) 2015 QLogic Corporation. + * All rights reserved. + * www.qlogic.com + * + * See LICENSE.bnx2x_pmd for copyright and licensing details. + */ + +#include "bnx2x.h" +#include "elink.h" +#include "ecore_mfw_req.h" +#include "ecore_fw_defs.h" +#include "ecore_hsi.h" +#include "ecore_reg.h" + +static elink_status_t elink_link_reset(struct elink_params *params, + struct elink_vars *vars, + uint8_t reset_ext_phy); +static elink_status_t elink_check_half_open_conn(struct elink_params *params, + struct elink_vars *vars, + uint8_t notify); +static elink_status_t elink_sfp_module_detection(struct elink_phy *phy, + struct elink_params *params); + +#define MDIO_REG_BANK_CL73_IEEEB0 0x0 +#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL 0x0 +#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN 0x0200 +#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN 0x1000 +#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST 0x8000 + +#define MDIO_REG_BANK_CL73_IEEEB1 0x10 +#define MDIO_CL73_IEEEB1_AN_ADV1 0x00 +#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE 0x0400 +#define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC 0x0800 +#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH 0x0C00 +#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK 0x0C00 +#define MDIO_CL73_IEEEB1_AN_ADV2 0x01 +#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M 0x0000 +#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX 0x0020 +#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 0x0040 +#define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR 0x0080 +#define MDIO_CL73_IEEEB1_AN_LP_ADV1 0x03 +#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE 0x0400 +#define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC 0x0800 +#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH 0x0C00 +#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK 0x0C00 +#define MDIO_CL73_IEEEB1_AN_LP_ADV2 0x04 + +#define MDIO_REG_BANK_RX0 0x80b0 +#define MDIO_RX0_RX_STATUS 0x10 +#define MDIO_RX0_RX_STATUS_SIGDET 0x8000 +#define MDIO_RX0_RX_STATUS_RX_SEQ_DONE 0x1000 +#define MDIO_RX0_RX_EQ_BOOST 0x1c +#define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_RX1 0x80c0 +#define MDIO_RX1_RX_EQ_BOOST 0x1c +#define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_RX2 0x80d0 +#define MDIO_RX2_RX_EQ_BOOST 0x1c +#define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_RX3 0x80e0 +#define MDIO_RX3_RX_EQ_BOOST 0x1c +#define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_RX_ALL 0x80f0 +#define MDIO_RX_ALL_RX_EQ_BOOST 0x1c +#define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK 0x7 +#define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL 0x10 + +#define MDIO_REG_BANK_TX0 0x8060 +#define MDIO_TX0_TX_DRIVER 0x17 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 +#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 +#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e +#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 +#define MDIO_TX0_TX_DRIVER_ICBUF1T 1 + +#define MDIO_REG_BANK_TX1 0x8070 +#define MDIO_TX1_TX_DRIVER 0x17 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 +#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 +#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e +#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 +#define MDIO_TX0_TX_DRIVER_ICBUF1T 1 + +#define MDIO_REG_BANK_TX2 0x8080 +#define MDIO_TX2_TX_DRIVER 0x17 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 +#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 +#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e +#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 +#define MDIO_TX0_TX_DRIVER_ICBUF1T 1 + +#define MDIO_REG_BANK_TX3 0x8090 +#define MDIO_TX3_TX_DRIVER 0x17 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000 +#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12 +#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0 +#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4 +#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e +#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1 +#define MDIO_TX0_TX_DRIVER_ICBUF1T 1 + +#define MDIO_REG_BANK_XGXS_BLOCK0 0x8000 +#define MDIO_BLOCK0_XGXS_CONTROL 0x10 + +#define MDIO_REG_BANK_XGXS_BLOCK1 0x8010 +#define MDIO_BLOCK1_LANE_CTRL0 0x15 +#define MDIO_BLOCK1_LANE_CTRL1 0x16 +#define MDIO_BLOCK1_LANE_CTRL2 0x17 +#define MDIO_BLOCK1_LANE_PRBS 0x19 + +#define MDIO_REG_BANK_XGXS_BLOCK2 0x8100 +#define MDIO_XGXS_BLOCK2_RX_LN_SWAP 0x10 +#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE 0x8000 +#define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE 0x4000 +#define MDIO_XGXS_BLOCK2_TX_LN_SWAP 0x11 +#define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE 0x8000 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G 0x14 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS 0x0001 +#define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS 0x0010 +#define MDIO_XGXS_BLOCK2_TEST_MODE_LANE 0x15 + +#define MDIO_REG_BANK_GP_STATUS 0x8120 +#define MDIO_GP_STATUS_TOP_AN_STATUS1 0x1B +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE 0x0001 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE 0x0002 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS 0x0004 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS 0x0008 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE 0x0010 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE 0x0020 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE 0x0040 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE 0x0080 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK 0x3f00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M 0x0000 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M 0x0100 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G 0x0200 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G 0x0300 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G 0x0400 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G 0x0500 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG 0x0600 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 0x0700 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG 0x0800 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G 0x0900 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G 0x0A00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G 0x0B00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G 0x0C00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX 0x0D00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 0x0E00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR 0x0F00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI 0x1B00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS 0x1E00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI 0x1F00 +#define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2 0x3900 + +#define MDIO_REG_BANK_10G_PARALLEL_DETECT 0x8130 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS 0x10 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK 0x8000 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL 0x11 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN 0x1 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK 0x13 +#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT (0xb71<<1) + +#define MDIO_REG_BANK_SERDES_DIGITAL 0x8300 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1 0x10 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF 0x0002 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN 0x0004 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT 0x0008 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET 0x0010 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE 0x0020 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2 0x11 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SGMII 0x0001 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_LINK 0x0002 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G 0x0018 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G 0x0010 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M 0x0008 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M 0x0000 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2 0x15 +#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED 0x0002 +#define MDIO_SERDES_DIGITAL_MISC1 0x18 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK 0xE000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M 0x2000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M 0x4000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M 0x6000 +#define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M 0x8000 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL 0x0010 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK 0x000f +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G 0x0000 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G 0x0001 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G 0x0002 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG 0x0003 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4 0x0004 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G 0x0005 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G 0x0006 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G 0x0007 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G 0x0008 +#define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G 0x0009 + +#define MDIO_REG_BANK_OVER_1G 0x8320 +#define MDIO_OVER_1G_DIGCTL_3_4 0x14 +#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK 0xffe0 +#define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT 5 +#define MDIO_OVER_1G_UP1 0x19 +#define MDIO_OVER_1G_UP1_2_5G 0x0001 +#define MDIO_OVER_1G_UP1_5G 0x0002 +#define MDIO_OVER_1G_UP1_6G 0x0004 +#define MDIO_OVER_1G_UP1_10G 0x0010 +#define MDIO_OVER_1G_UP1_10GH 0x0008 +#define MDIO_OVER_1G_UP1_12G 0x0020 +#define MDIO_OVER_1G_UP1_12_5G 0x0040 +#define MDIO_OVER_1G_UP1_13G 0x0080 +#define MDIO_OVER_1G_UP1_15G 0x0100 +#define MDIO_OVER_1G_UP1_16G 0x0200 +#define MDIO_OVER_1G_UP2 0x1A +#define MDIO_OVER_1G_UP2_IPREDRIVER_MASK 0x0007 +#define MDIO_OVER_1G_UP2_IDRIVER_MASK 0x0038 +#define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK 0x03C0 +#define MDIO_OVER_1G_UP3 0x1B +#define MDIO_OVER_1G_UP3_HIGIG2 0x0001 +#define MDIO_OVER_1G_LP_UP1 0x1C +#define MDIO_OVER_1G_LP_UP2 0x1D +#define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK 0x03ff +#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK 0x0780 +#define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT 7 +#define MDIO_OVER_1G_LP_UP3 0x1E + +#define MDIO_REG_BANK_REMOTE_PHY 0x8330 +#define MDIO_REMOTE_PHY_MISC_RX_STATUS 0x10 +#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG 0x0010 +#define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG 0x0600 + +#define MDIO_REG_BANK_BAM_NEXT_PAGE 0x8350 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL 0x10 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE 0x0001 +#define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN 0x0002 + +#define MDIO_REG_BANK_CL73_USERB0 0x8370 +#define MDIO_CL73_USERB0_CL73_UCTRL 0x10 +#define MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL 0x0002 +#define MDIO_CL73_USERB0_CL73_USTAT1 0x11 +#define MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK 0x0100 +#define MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37 0x0400 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1 0x12 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN 0x8000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN 0x4000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN 0x2000 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL3 0x14 +#define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR 0x0001 + +#define MDIO_REG_BANK_AER_BLOCK 0xFFD0 +#define MDIO_AER_BLOCK_AER_REG 0x1E + +#define MDIO_REG_BANK_COMBO_IEEE0 0xFFE0 +#define MDIO_COMBO_IEEE0_MII_CONTROL 0x10 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK 0x2040 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10 0x0000 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100 0x2000 +#define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000 0x0040 +#define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX 0x0100 +#define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN 0x0200 +#define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN 0x1000 +#define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK 0x4000 +#define MDIO_COMBO_IEEO_MII_CONTROL_RESET 0x8000 +#define MDIO_COMBO_IEEE0_MII_STATUS 0x11 +#define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS 0x0004 +#define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE 0x0020 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV 0x14 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX 0x0020 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX 0x0040 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE 0x0000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC 0x0080 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC 0x0100 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE 0x8000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1 0x15 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE 0x8000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK 0x4000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE 0x0000 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH 0x0180 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP 0x0040 +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP 0x0020 +/*WhenthelinkpartnerisinSGMIImode(bit0=1),then +bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge. +Theotherbitsarereservedandshouldbezero*/ +#define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE 0x0001 + +#define MDIO_PMA_DEVAD 0x1 +/*ieee*/ +#define MDIO_PMA_REG_CTRL 0x0 +#define MDIO_PMA_REG_STATUS 0x1 +#define MDIO_PMA_REG_10G_CTRL2 0x7 +#define MDIO_PMA_REG_TX_DISABLE 0x0009 +#define MDIO_PMA_REG_RX_SD 0xa +/*bnx2x*/ +#define MDIO_PMA_REG_BNX2X_CTRL 0x0096 +#define MDIO_PMA_REG_FEC_CTRL 0x00ab +#define MDIO_PMA_LASI_RXCTRL 0x9000 +#define MDIO_PMA_LASI_TXCTRL 0x9001 +#define MDIO_PMA_LASI_CTRL 0x9002 +#define MDIO_PMA_LASI_RXSTAT 0x9003 +#define MDIO_PMA_LASI_TXSTAT 0x9004 +#define MDIO_PMA_LASI_STAT 0x9005 +#define MDIO_PMA_REG_PHY_IDENTIFIER 0xc800 +#define MDIO_PMA_REG_DIGITAL_CTRL 0xc808 +#define MDIO_PMA_REG_DIGITAL_STATUS 0xc809 +#define MDIO_PMA_REG_TX_POWER_DOWN 0xca02 +#define MDIO_PMA_REG_CMU_PLL_BYPASS 0xca09 +#define MDIO_PMA_REG_MISC_CTRL 0xca0a +#define MDIO_PMA_REG_GEN_CTRL 0xca10 +#define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP 0x0188 +#define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET 0x018a +#define MDIO_PMA_REG_M8051_MSGIN_REG 0xca12 +#define MDIO_PMA_REG_M8051_MSGOUT_REG 0xca13 +#define MDIO_PMA_REG_ROM_VER1 0xca19 +#define MDIO_PMA_REG_ROM_VER2 0xca1a +#define MDIO_PMA_REG_EDC_FFE_MAIN 0xca1b +#define MDIO_PMA_REG_PLL_BANDWIDTH 0xca1d +#define MDIO_PMA_REG_PLL_CTRL 0xca1e +#define MDIO_PMA_REG_MISC_CTRL0 0xca23 +#define MDIO_PMA_REG_LRM_MODE 0xca3f +#define MDIO_PMA_REG_CDR_BANDWIDTH 0xca46 +#define MDIO_PMA_REG_MISC_CTRL1 0xca85 + +#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL 0x8000 +#define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK 0x000c +#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE 0x0000 +#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE 0x0004 +#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS 0x0008 +#define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED 0x000c +#define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT 0x8002 +#define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR 0x8003 +#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF 0xc820 +#define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff +#define MDIO_PMA_REG_8726_TX_CTRL1 0xca01 +#define MDIO_PMA_REG_8726_TX_CTRL2 0xca05 + +#define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR 0x8005 +#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF 0x8007 +#define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff +#define MDIO_PMA_REG_8727_MISC_CTRL 0x8309 +#define MDIO_PMA_REG_8727_TX_CTRL1 0xca02 +#define MDIO_PMA_REG_8727_TX_CTRL2 0xca05 +#define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808 +#define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e +#define MDIO_PMA_REG_8727_PCS_GP 0xc842 +#define MDIO_PMA_REG_8727_OPT_CFG_REG 0xc8e4 + +#define MDIO_AN_REG_8727_MISC_CTRL 0x8309 +#define MDIO_PMA_REG_8073_CHIP_REV 0xc801 +#define MDIO_PMA_REG_8073_SPEED_LINK_STATUS 0xc820 +#define MDIO_PMA_REG_8073_XAUI_WA 0xc841 +#define MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL 0xcd08 + +#define MDIO_PMA_REG_7101_RESET 0xc000 +#define MDIO_PMA_REG_7107_LED_CNTL 0xc007 +#define MDIO_PMA_REG_7107_LINK_LED_CNTL 0xc009 +#define MDIO_PMA_REG_7101_VER1 0xc026 +#define MDIO_PMA_REG_7101_VER2 0xc027 + +#define MDIO_PMA_REG_8481_PMD_SIGNAL 0xa811 +#define MDIO_PMA_REG_8481_LED1_MASK 0xa82c +#define MDIO_PMA_REG_8481_LED2_MASK 0xa82f +#define MDIO_PMA_REG_8481_LED3_MASK 0xa832 +#define MDIO_PMA_REG_8481_LED3_BLINK 0xa834 +#define MDIO_PMA_REG_8481_LED5_MASK 0xa838 +#define MDIO_PMA_REG_8481_SIGNAL_MASK 0xa835 +#define MDIO_PMA_REG_8481_LINK_SIGNAL 0xa83b +#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK 0x800 +#define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT 11 + +#define MDIO_WIS_DEVAD 0x2 +/*bnx2x*/ +#define MDIO_WIS_REG_LASI_CNTL 0x9002 +#define MDIO_WIS_REG_LASI_STATUS 0x9005 + +#define MDIO_PCS_DEVAD 0x3 +#define MDIO_PCS_REG_STATUS 0x0020 +#define MDIO_PCS_REG_LASI_STATUS 0x9005 +#define MDIO_PCS_REG_7101_DSP_ACCESS 0xD000 +#define MDIO_PCS_REG_7101_SPI_MUX 0xD008 +#define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A +#define MDIO_PCS_REG_7101_SPI_RESET_BIT (5) +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6) +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD (0xC7) +#define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2) +#define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028 + +#define MDIO_XS_DEVAD 0x4 +#define MDIO_XS_REG_STATUS 0x0001 +#define MDIO_XS_PLL_SEQUENCER 0x8000 +#define MDIO_XS_SFX7101_XGXS_TEST1 0xc00a + +#define MDIO_XS_8706_REG_BANK_RX0 0x80bc +#define MDIO_XS_8706_REG_BANK_RX1 0x80cc +#define MDIO_XS_8706_REG_BANK_RX2 0x80dc +#define MDIO_XS_8706_REG_BANK_RX3 0x80ec +#define MDIO_XS_8706_REG_BANK_RXA 0x80fc + +#define MDIO_XS_REG_8073_RX_CTRL_PCIE 0x80FA + +#define MDIO_AN_DEVAD 0x7 +/*ieee*/ +#define MDIO_AN_REG_CTRL 0x0000 +#define MDIO_AN_REG_STATUS 0x0001 +#define MDIO_AN_REG_STATUS_AN_COMPLETE 0x0020 +#define MDIO_AN_REG_ADV_PAUSE 0x0010 +#define MDIO_AN_REG_ADV_PAUSE_PAUSE 0x0400 +#define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC 0x0800 +#define MDIO_AN_REG_ADV_PAUSE_BOTH 0x0C00 +#define MDIO_AN_REG_ADV_PAUSE_MASK 0x0C00 +#define MDIO_AN_REG_ADV 0x0011 +#define MDIO_AN_REG_ADV2 0x0012 +#define MDIO_AN_REG_LP_AUTO_NEG 0x0013 +#define MDIO_AN_REG_LP_AUTO_NEG2 0x0014 +#define MDIO_AN_REG_MASTER_STATUS 0x0021 +#define MDIO_AN_REG_EEE_ADV 0x003c +#define MDIO_AN_REG_LP_EEE_ADV 0x003d +/*bnx2x*/ +#define MDIO_AN_REG_LINK_STATUS 0x8304 +#define MDIO_AN_REG_CL37_CL73 0x8370 +#define MDIO_AN_REG_CL37_AN 0xffe0 +#define MDIO_AN_REG_CL37_FC_LD 0xffe4 +#define MDIO_AN_REG_CL37_FC_LP 0xffe5 +#define MDIO_AN_REG_1000T_STATUS 0xffea + +#define MDIO_AN_REG_8073_2_5G 0x8329 +#define MDIO_AN_REG_8073_BAM 0x8350 + +#define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL 0x0020 +#define MDIO_AN_REG_8481_LEGACY_MII_CTRL 0xffe0 +#define MDIO_AN_REG_8481_MII_CTRL_FORCE_1G 0x40 +#define MDIO_AN_REG_8481_LEGACY_MII_STATUS 0xffe1 +#define MDIO_AN_REG_8481_LEGACY_AN_ADV 0xffe4 +#define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION 0xffe6 +#define MDIO_AN_REG_8481_1000T_CTRL 0xffe9 +#define MDIO_AN_REG_8481_1G_100T_EXT_CTRL 0xfff0 +#define MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF 0x0008 +#define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW 0xfff5 +#define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS 0xfff7 +#define MDIO_AN_REG_8481_AUX_CTRL 0xfff8 +#define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc + +/* BNX2X84823 only */ +#define MDIO_CTL_DEVAD 0x1e +#define MDIO_CTL_REG_84823_MEDIA 0x401a +#define MDIO_CTL_REG_84823_MEDIA_MAC_MASK 0x0018 + /* These pins configure the BNX2X84823 interface to MAC after reset. */ +#define MDIO_CTL_REG_84823_CTRL_MAC_XFI 0x0008 +#define MDIO_CTL_REG_84823_MEDIA_MAC_XAUI_M 0x0010 + /* These pins configure the BNX2X84823 interface to Line after reset. */ +#define MDIO_CTL_REG_84823_MEDIA_LINE_MASK 0x0060 +#define MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L 0x0020 +#define MDIO_CTL_REG_84823_MEDIA_LINE_XFI 0x0040 + /* When this pin is active high during reset, 10GBASE-T core is power + * down, When it is active low the 10GBASE-T is power up + */ +#define MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN 0x0080 +#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK 0x0100 +#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000 +#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100 +#define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000 +#define MDIO_CTL_REG_84823_USER_CTRL_REG 0x4005 +#define MDIO_CTL_REG_84823_USER_CTRL_CMS 0x0080 +#define MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH 0xa82b +#define MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ 0x2f +#define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3 +#define MDIO_PMA_REG_84833_CTL_LED_CTL_1 0xa8ec +#define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080 + +/* BNX2X84833 only */ +#define MDIO_84833_TOP_CFG_FW_REV 0x400f +#define MDIO_84833_TOP_CFG_FW_EEE 0x10b1 +#define MDIO_84833_TOP_CFG_FW_NO_EEE 0x1f81 +#define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a +#define MDIO_84833_SUPER_ISOLATE 0x8000 +/* These are mailbox register set used by 84833. */ +#define MDIO_84833_TOP_CFG_SCRATCH_REG0 0x4005 +#define MDIO_84833_TOP_CFG_SCRATCH_REG1 0x4006 +#define MDIO_84833_TOP_CFG_SCRATCH_REG2 0x4007 +#define MDIO_84833_TOP_CFG_SCRATCH_REG3 0x4008 +#define MDIO_84833_TOP_CFG_SCRATCH_REG4 0x4009 +#define MDIO_84833_TOP_CFG_SCRATCH_REG26 0x4037 +#define MDIO_84833_TOP_CFG_SCRATCH_REG27 0x4038 +#define MDIO_84833_TOP_CFG_SCRATCH_REG28 0x4039 +#define MDIO_84833_TOP_CFG_SCRATCH_REG29 0x403a +#define MDIO_84833_TOP_CFG_SCRATCH_REG30 0x403b +#define MDIO_84833_TOP_CFG_SCRATCH_REG31 0x403c +#define MDIO_84833_CMD_HDLR_COMMAND MDIO_84833_TOP_CFG_SCRATCH_REG0 +#define MDIO_84833_CMD_HDLR_STATUS MDIO_84833_TOP_CFG_SCRATCH_REG26 +#define MDIO_84833_CMD_HDLR_DATA1 MDIO_84833_TOP_CFG_SCRATCH_REG27 +#define MDIO_84833_CMD_HDLR_DATA2 MDIO_84833_TOP_CFG_SCRATCH_REG28 +#define MDIO_84833_CMD_HDLR_DATA3 MDIO_84833_TOP_CFG_SCRATCH_REG29 +#define MDIO_84833_CMD_HDLR_DATA4 MDIO_84833_TOP_CFG_SCRATCH_REG30 +#define MDIO_84833_CMD_HDLR_DATA5 MDIO_84833_TOP_CFG_SCRATCH_REG31 + +/* Mailbox command set used by 84833. */ +#define PHY84833_CMD_SET_PAIR_SWAP 0x8001 +#define PHY84833_CMD_GET_EEE_MODE 0x8008 +#define PHY84833_CMD_SET_EEE_MODE 0x8009 +#define PHY84833_CMD_GET_CURRENT_TEMP 0x8031 +/* Mailbox status set used by 84833. */ +#define PHY84833_STATUS_CMD_RECEIVED 0x0001 +#define PHY84833_STATUS_CMD_IN_PROGRESS 0x0002 +#define PHY84833_STATUS_CMD_COMPLETE_PASS 0x0004 +#define PHY84833_STATUS_CMD_COMPLETE_ERROR 0x0008 +#define PHY84833_STATUS_CMD_OPEN_FOR_CMDS 0x0010 +#define PHY84833_STATUS_CMD_SYSTEM_BOOT 0x0020 +#define PHY84833_STATUS_CMD_NOT_OPEN_FOR_CMDS 0x0040 +#define PHY84833_STATUS_CMD_CLEAR_COMPLETE 0x0080 +#define PHY84833_STATUS_CMD_OPEN_OVERRIDE 0xa5a5 + +/* Warpcore clause 45 addressing */ +#define MDIO_WC_DEVAD 0x3 +#define MDIO_WC_REG_IEEE0BLK_MIICNTL 0x0 +#define MDIO_WC_REG_IEEE0BLK_AUTONEGNP 0x7 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT0 0x10 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1 0x11 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2 0x12 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY 0x4000 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ 0x8000 +#define MDIO_WC_REG_PCS_STATUS2 0x0021 +#define MDIO_WC_REG_PMD_KR_CONTROL 0x0096 +#define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL 0x8000 +#define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1 0x800e +#define MDIO_WC_REG_XGXSBLK1_DESKEW 0x8010 +#define MDIO_WC_REG_XGXSBLK1_LANECTRL0 0x8015 +#define MDIO_WC_REG_XGXSBLK1_LANECTRL1 0x8016 +#define MDIO_WC_REG_XGXSBLK1_LANECTRL2 0x8017 +#define MDIO_WC_REG_XGXSBLK1_LANECTRL3 0x8018 +#define MDIO_WC_REG_XGXSBLK1_LANETEST0 0x801a +#define MDIO_WC_REG_TX0_ANA_CTRL0 0x8061 +#define MDIO_WC_REG_TX1_ANA_CTRL0 0x8071 +#define MDIO_WC_REG_TX2_ANA_CTRL0 0x8081 +#define MDIO_WC_REG_TX3_ANA_CTRL0 0x8091 +#define MDIO_WC_REG_TX0_TX_DRIVER 0x8067 +#define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET 0x04 +#define MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_MASK 0x00f0 +#define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET 0x08 +#define MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00 +#define MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET 0x0c +#define MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_MASK 0x7000 +#define MDIO_WC_REG_TX1_TX_DRIVER 0x8077 +#define MDIO_WC_REG_TX2_TX_DRIVER 0x8087 +#define MDIO_WC_REG_TX3_TX_DRIVER 0x8097 +#define MDIO_WC_REG_RX0_ANARXCONTROL1G 0x80b9 +#define MDIO_WC_REG_RX2_ANARXCONTROL1G 0x80d9 +#define MDIO_WC_REG_RX0_PCI_CTRL 0x80ba +#define MDIO_WC_REG_RX1_PCI_CTRL 0x80ca +#define MDIO_WC_REG_RX2_PCI_CTRL 0x80da +#define MDIO_WC_REG_RX3_PCI_CTRL 0x80ea +#define MDIO_WC_REG_XGXSBLK2_UNICORE_MODE_10G 0x8104 +#define MDIO_WC_REG_XGXS_STATUS3 0x8129 +#define MDIO_WC_REG_PAR_DET_10G_STATUS 0x8130 +#define MDIO_WC_REG_PAR_DET_10G_CTRL 0x8131 +#define MDIO_WC_REG_XGXS_STATUS4 0x813c +#define MDIO_WC_REG_XGXS_X2_CONTROL2 0x8141 +#define MDIO_WC_REG_XGXS_X2_CONTROL3 0x8142 +#define MDIO_WC_REG_XGXS_RX_LN_SWAP1 0x816B +#define MDIO_WC_REG_XGXS_TX_LN_SWAP1 0x8169 +#define MDIO_WC_REG_GP2_STATUS_GP_2_0 0x81d0 +#define MDIO_WC_REG_GP2_STATUS_GP_2_1 0x81d1 +#define MDIO_WC_REG_GP2_STATUS_GP_2_2 0x81d2 +#define MDIO_WC_REG_GP2_STATUS_GP_2_3 0x81d3 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4 0x81d4 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL 0x1000 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CMPL 0x0100 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP 0x0010 +#define MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_AN_CAP 0x1 +#define MDIO_WC_REG_UC_INFO_B0_DEAD_TRAP 0x81EE +#define MDIO_WC_REG_UC_INFO_B1_VERSION 0x81F0 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE 0x81F2 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE0_OFFSET 0x0 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT 0x0 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_OPT_LR 0x1 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC 0x2 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_XLAUI 0x3 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_LONG_CH_6G 0x4 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE1_OFFSET 0x4 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE2_OFFSET 0x8 +#define MDIO_WC_REG_UC_INFO_B1_FIRMWARE_LANE3_OFFSET 0xc +#define MDIO_WC_REG_UC_INFO_B1_CRC 0x81FE +#define MDIO_WC_REG_DSC1B0_UC_CTRL 0x820e +#define MDIO_WC_REG_DSC1B0_UC_CTRL_RDY4CMD (1<<7) +#define MDIO_WC_REG_DSC_SMC 0x8213 +#define MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0 0x821e +#define MDIO_WC_REG_TX_FIR_TAP 0x82e2 +#define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET 0x00 +#define MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_MASK 0x000f +#define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET 0x04 +#define MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_MASK 0x03f0 +#define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET 0x0a +#define MDIO_WC_REG_TX_FIR_TAP_POST_TAP_MASK 0x7c00 +#define MDIO_WC_REG_TX_FIR_TAP_ENABLE 0x8000 +#define MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP 0x82e2 +#define MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL 0x82e3 +#define MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL 0x82e6 +#define MDIO_WC_REG_CL72_USERB0_CL72_BR_DEF_CTRL 0x82e7 +#define MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL 0x82e8 +#define MDIO_WC_REG_CL72_USERB0_CL72_MISC4_CONTROL 0x82ec +#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1 0x8300 +#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2 0x8301 +#define MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3 0x8302 +#define MDIO_WC_REG_SERDESDIGITAL_STATUS1000X1 0x8304 +#define MDIO_WC_REG_SERDESDIGITAL_MISC1 0x8308 +#define MDIO_WC_REG_SERDESDIGITAL_MISC2 0x8309 +#define MDIO_WC_REG_DIGITAL3_UP1 0x8329 +#define MDIO_WC_REG_DIGITAL3_LP_UP1 0x832c +#define MDIO_WC_REG_DIGITAL4_MISC3 0x833c +#define MDIO_WC_REG_DIGITAL4_MISC5 0x833e +#define MDIO_WC_REG_DIGITAL5_MISC6 0x8345 +#define MDIO_WC_REG_DIGITAL5_MISC7 0x8349 +#define MDIO_WC_REG_DIGITAL5_LINK_STATUS 0x834d +#define MDIO_WC_REG_DIGITAL5_ACTUAL_SPEED 0x834e +#define MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL 0x8350 +#define MDIO_WC_REG_CL49_USERB0_CTRL 0x8368 +#define MDIO_WC_REG_CL73_USERB0_CTRL 0x8370 +#define MDIO_WC_REG_CL73_USERB0_USTAT 0x8371 +#define MDIO_WC_REG_CL73_BAM_CTRL1 0x8372 +#define MDIO_WC_REG_CL73_BAM_CTRL2 0x8373 +#define MDIO_WC_REG_CL73_BAM_CTRL3 0x8374 +#define MDIO_WC_REG_CL73_BAM_CODE_FIELD 0x837b +#define MDIO_WC_REG_EEE_COMBO_CONTROL0 0x8390 +#define MDIO_WC_REG_TX66_CONTROL 0x83b0 +#define MDIO_WC_REG_RX66_CONTROL 0x83c0 +#define MDIO_WC_REG_RX66_SCW0 0x83c2 +#define MDIO_WC_REG_RX66_SCW1 0x83c3 +#define MDIO_WC_REG_RX66_SCW2 0x83c4 +#define MDIO_WC_REG_RX66_SCW3 0x83c5 +#define MDIO_WC_REG_RX66_SCW0_MASK 0x83c6 +#define MDIO_WC_REG_RX66_SCW1_MASK 0x83c7 +#define MDIO_WC_REG_RX66_SCW2_MASK 0x83c8 +#define MDIO_WC_REG_RX66_SCW3_MASK 0x83c9 +#define MDIO_WC_REG_FX100_CTRL1 0x8400 +#define MDIO_WC_REG_FX100_CTRL3 0x8402 +#define MDIO_WC_REG_CL82_USERB1_TX_CTRL5 0x8436 +#define MDIO_WC_REG_CL82_USERB1_TX_CTRL6 0x8437 +#define MDIO_WC_REG_CL82_USERB1_TX_CTRL7 0x8438 +#define MDIO_WC_REG_CL82_USERB1_TX_CTRL9 0x8439 +#define MDIO_WC_REG_CL82_USERB1_RX_CTRL10 0x843a +#define MDIO_WC_REG_CL82_USERB1_RX_CTRL11 0x843b +#define MDIO_WC_REG_ETA_CL73_OUI1 0x8453 +#define MDIO_WC_REG_ETA_CL73_OUI2 0x8454 +#define MDIO_WC_REG_ETA_CL73_OUI3 0x8455 +#define MDIO_WC_REG_ETA_CL73_LD_BAM_CODE 0x8456 +#define MDIO_WC_REG_ETA_CL73_LD_UD_CODE 0x8457 +#define MDIO_WC_REG_MICROBLK_CMD 0xffc2 +#define MDIO_WC_REG_MICROBLK_DL_STATUS 0xffc5 +#define MDIO_WC_REG_MICROBLK_CMD3 0xffcc + +#define MDIO_WC_REG_AERBLK_AER 0xffde +#define MDIO_WC_REG_COMBO_IEEE0_MIICTRL 0xffe0 +#define MDIO_WC_REG_COMBO_IEEE0_MIIISTAT 0xffe1 + +#define MDIO_WC0_XGXS_BLK2_LANE_RESET 0x810A +#define MDIO_WC0_XGXS_BLK2_LANE_RESET_RX_BITSHIFT 0 +#define MDIO_WC0_XGXS_BLK2_LANE_RESET_TX_BITSHIFT 4 + +#define MDIO_WC0_XGXS_BLK6_XGXS_X2_CONTROL2 0x8141 + +#define DIGITAL5_ACTUAL_SPEED_TX_MASK 0x003f + +/* 54618se */ +#define MDIO_REG_GPHY_MII_STATUS 0x1 +#define MDIO_REG_GPHY_PHYID_LSB 0x3 +#define MDIO_REG_GPHY_CL45_ADDR_REG 0xd +#define MDIO_REG_GPHY_CL45_REG_WRITE 0x4000 +#define MDIO_REG_GPHY_CL45_REG_READ 0xc000 +#define MDIO_REG_GPHY_CL45_DATA_REG 0xe +#define MDIO_REG_GPHY_EEE_RESOLVED 0x803e +#define MDIO_REG_GPHY_EXP_ACCESS_GATE 0x15 +#define MDIO_REG_GPHY_EXP_ACCESS 0x17 +#define MDIO_REG_GPHY_EXP_ACCESS_TOP 0xd00 +#define MDIO_REG_GPHY_EXP_TOP_2K_BUF 0x40 +#define MDIO_REG_GPHY_AUX_STATUS 0x19 +#define MDIO_REG_INTR_STATUS 0x1a +#define MDIO_REG_INTR_MASK 0x1b +#define MDIO_REG_INTR_MASK_LINK_STATUS (0x1 << 1) +#define MDIO_REG_GPHY_SHADOW 0x1c +#define MDIO_REG_GPHY_SHADOW_LED_SEL1 (0x0d << 10) +#define MDIO_REG_GPHY_SHADOW_LED_SEL2 (0x0e << 10) +#define MDIO_REG_GPHY_SHADOW_WR_ENA (0x1 << 15) +#define MDIO_REG_GPHY_SHADOW_AUTO_DET_MED (0x1e << 10) +#define MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD (0x1 << 8) + +typedef elink_status_t(*read_sfp_module_eeprom_func_p) (struct elink_phy * phy, + struct elink_params * + params, + uint8_t dev_addr, + uint16_t addr, + uint8_t byte_cnt, + uint8_t * o_buf, + uint8_t); +/********************************************************/ +#define ELINK_ETH_HLEN 14 +/* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */ +#define ELINK_ETH_OVREHEAD (ELINK_ETH_HLEN + 8 + 8) +#define ELINK_ETH_MIN_PACKET_SIZE 60 +#define ELINK_ETH_MAX_PACKET_SIZE 1500 +#define ELINK_ETH_MAX_JUMBO_PACKET_SIZE 9600 +#define ELINK_MDIO_ACCESS_TIMEOUT 1000 +#define WC_LANE_MAX 4 +#define I2C_SWITCH_WIDTH 2 +#define I2C_BSC0 0 +#define I2C_BSC1 1 +#define I2C_WA_RETRY_CNT 3 +#define I2C_WA_PWR_ITER (I2C_WA_RETRY_CNT - 1) +#define MCPR_IMC_COMMAND_READ_OP 1 +#define MCPR_IMC_COMMAND_WRITE_OP 2 + +/* LED Blink rate that will achieve ~15.9Hz */ +#define LED_BLINK_RATE_VAL_E3 354 +#define LED_BLINK_RATE_VAL_E1X_E2 480 +/***********************************************************/ +/* Shortcut definitions */ +/***********************************************************/ + +#define ELINK_NIG_LATCH_BC_ENABLE_MI_INT 0 + +#define ELINK_NIG_STATUS_EMAC0_MI_INT \ + NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT +#define ELINK_NIG_STATUS_XGXS0_LINK10G \ + NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G +#define ELINK_NIG_STATUS_XGXS0_LINK_STATUS \ + NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS +#define ELINK_NIG_STATUS_XGXS0_LINK_STATUS_SIZE \ + NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE +#define ELINK_NIG_STATUS_SERDES0_LINK_STATUS \ + NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS +#define ELINK_NIG_MASK_MI_INT \ + NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT +#define ELINK_NIG_MASK_XGXS0_LINK10G \ + NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G +#define ELINK_NIG_MASK_XGXS0_LINK_STATUS \ + NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS +#define ELINK_NIG_MASK_SERDES0_LINK_STATUS \ + NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS + +#define ELINK_MDIO_AN_CL73_OR_37_COMPLETE \ + (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | \ + MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE) + +#define ELINK_XGXS_RESET_BITS \ + (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB) + +#define ELINK_SERDES_RESET_BITS \ + (MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN | \ + MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD) + +#define ELINK_AUTONEG_CL37 SHARED_HW_CFG_AN_ENABLE_CL37 +#define ELINK_AUTONEG_CL73 SHARED_HW_CFG_AN_ENABLE_CL73 +#define ELINK_AUTONEG_BAM SHARED_HW_CFG_AN_ENABLE_BAM +#define ELINK_AUTONEG_PARALLEL \ + SHARED_HW_CFG_AN_ENABLE_PARALLEL_DETECTION +#define ELINK_AUTONEG_SGMII_FIBER_AUTODET \ + SHARED_HW_CFG_AN_EN_SGMII_FIBER_AUTO_DETECT +#define ELINK_AUTONEG_REMOTE_PHY SHARED_HW_CFG_AN_ENABLE_REMOTE_PHY + +#define ELINK_GP_STATUS_PAUSE_RSOLUTION_TXSIDE \ + MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE +#define ELINK_GP_STATUS_PAUSE_RSOLUTION_RXSIDE \ + MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE +#define ELINK_GP_STATUS_SPEED_MASK \ + MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK +#define ELINK_GP_STATUS_10M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M +#define ELINK_GP_STATUS_100M MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M +#define ELINK_GP_STATUS_1G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G +#define ELINK_GP_STATUS_2_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G +#define ELINK_GP_STATUS_5G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G +#define ELINK_GP_STATUS_6G MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G +#define ELINK_GP_STATUS_10G_HIG \ + MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG +#define ELINK_GP_STATUS_10G_CX4 \ + MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4 +#define ELINK_GP_STATUS_1G_KX MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX +#define ELINK_GP_STATUS_10G_KX4 \ + MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4 +#define ELINK_GP_STATUS_10G_KR MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KR +#define ELINK_GP_STATUS_10G_XFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_XFI +#define ELINK_GP_STATUS_20G_DXGXS MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_DXGXS +#define ELINK_GP_STATUS_10G_SFI MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_SFI +#define ELINK_GP_STATUS_20G_KR2 MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_20G_KR2 +#define ELINK_LINK_10THD LINK_STATUS_SPEED_AND_DUPLEX_10THD +#define ELINK_LINK_10TFD LINK_STATUS_SPEED_AND_DUPLEX_10TFD +#define ELINK_LINK_100TXHD LINK_STATUS_SPEED_AND_DUPLEX_100TXHD +#define ELINK_LINK_100T4 LINK_STATUS_SPEED_AND_DUPLEX_100T4 +#define ELINK_LINK_100TXFD LINK_STATUS_SPEED_AND_DUPLEX_100TXFD +#define ELINK_LINK_1000THD LINK_STATUS_SPEED_AND_DUPLEX_1000THD +#define ELINK_LINK_1000TFD LINK_STATUS_SPEED_AND_DUPLEX_1000TFD +#define ELINK_LINK_1000XFD LINK_STATUS_SPEED_AND_DUPLEX_1000XFD +#define ELINK_LINK_2500THD LINK_STATUS_SPEED_AND_DUPLEX_2500THD +#define ELINK_LINK_2500TFD LINK_STATUS_SPEED_AND_DUPLEX_2500TFD +#define ELINK_LINK_2500XFD LINK_STATUS_SPEED_AND_DUPLEX_2500XFD +#define ELINK_LINK_10GTFD LINK_STATUS_SPEED_AND_DUPLEX_10GTFD +#define ELINK_LINK_10GXFD LINK_STATUS_SPEED_AND_DUPLEX_10GXFD +#define ELINK_LINK_20GTFD LINK_STATUS_SPEED_AND_DUPLEX_20GTFD +#define ELINK_LINK_20GXFD LINK_STATUS_SPEED_AND_DUPLEX_20GXFD + +#define ELINK_LINK_UPDATE_MASK \ + (LINK_STATUS_SPEED_AND_DUPLEX_MASK | \ + LINK_STATUS_LINK_UP | \ + LINK_STATUS_PHYSICAL_LINK_FLAG | \ + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | \ + LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | \ + LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | \ + LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | \ + LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | \ + LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE) + +#define ELINK_SFP_EEPROM_CON_TYPE_ADDR 0x2 +#define ELINK_SFP_EEPROM_CON_TYPE_VAL_LC 0x7 +#define ELINK_SFP_EEPROM_CON_TYPE_VAL_COPPER 0x21 +#define ELINK_SFP_EEPROM_CON_TYPE_VAL_RJ45 0x22 + +#define ELINK_SFP_EEPROM_COMP_CODE_ADDR 0x3 +#define ELINK_SFP_EEPROM_COMP_CODE_SR_MASK (1<<4) +#define ELINK_SFP_EEPROM_COMP_CODE_LR_MASK (1<<5) +#define ELINK_SFP_EEPROM_COMP_CODE_LRM_MASK (1<<6) + +#define ELINK_SFP_EEPROM_FC_TX_TECH_ADDR 0x8 +#define ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE 0x4 +#define ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE 0x8 + +#define ELINK_SFP_EEPROM_OPTIONS_ADDR 0x40 +#define ELINK_SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK 0x1 +#define ELINK_SFP_EEPROM_OPTIONS_SIZE 2 + +#define ELINK_EDC_MODE_LINEAR 0x0022 +#define ELINK_EDC_MODE_LIMITING 0x0044 +#define ELINK_EDC_MODE_PASSIVE_DAC 0x0055 +#define ELINK_EDC_MODE_ACTIVE_DAC 0x0066 + +/* ETS defines*/ +#define DCBX_INVALID_COS (0xFF) + +#define ELINK_ETS_BW_LIMIT_CREDIT_UPPER_BOUND (0x5000) +#define ELINK_ETS_BW_LIMIT_CREDIT_WEIGHT (0x5000) +#define ELINK_ETS_E3B0_NIG_MIN_W_VAL_UP_TO_10GBPS (1360) +#define ELINK_ETS_E3B0_NIG_MIN_W_VAL_20GBPS (2720) +#define ELINK_ETS_E3B0_PBF_MIN_W_VAL (10000) + +#define ELINK_MAX_PACKET_SIZE (9700) +#define MAX_KR_LINK_RETRY 4 + +/**********************************************************/ +/* INTERFACE */ +/**********************************************************/ + +#define CL22_WR_OVER_CL45(_sc, _phy, _bank, _addr, _val) \ + elink_cl45_write(_sc, _phy, \ + (_phy)->def_md_devad, \ + (_bank + (_addr & 0xf)), \ + _val) + +#define CL22_RD_OVER_CL45(_sc, _phy, _bank, _addr, _val) \ + elink_cl45_read(_sc, _phy, \ + (_phy)->def_md_devad, \ + (_bank + (_addr & 0xf)), \ + _val) + +static uint32_t elink_bits_en(struct bnx2x_softc *sc, uint32_t reg, uint32_t bits) +{ + uint32_t val = REG_RD(sc, reg); + + val |= bits; + REG_WR(sc, reg, val); + return val; +} + +static uint32_t elink_bits_dis(struct bnx2x_softc *sc, uint32_t reg, + uint32_t bits) +{ + uint32_t val = REG_RD(sc, reg); + + val &= ~bits; + REG_WR(sc, reg, val); + return val; +} + +/* + * elink_check_lfa - This function checks if link reinitialization is required, + * or link flap can be avoided. + * + * @params: link parameters + * Returns 0 if Link Flap Avoidance conditions are met otherwise, the failed + * condition code. + */ +static int elink_check_lfa(struct elink_params *params) +{ + uint32_t link_status, cfg_idx, lfa_mask, cfg_size; + uint32_t cur_speed_cap_mask, cur_req_fc_auto_adv, additional_config; + uint32_t saved_val, req_val, eee_status; + struct bnx2x_softc *sc = params->sc; + + additional_config = + REG_RD(sc, params->lfa_base + + offsetof(struct shmem_lfa, additional_config)); + + /* NOTE: must be first condition checked - + * to verify DCC bit is cleared in any case! + */ + if (additional_config & NO_LFA_DUE_TO_DCC_MASK) { + PMD_DRV_LOG(DEBUG, "No LFA due to DCC flap after clp exit"); + REG_WR(sc, params->lfa_base + + offsetof(struct shmem_lfa, additional_config), + additional_config & ~NO_LFA_DUE_TO_DCC_MASK); + return LFA_DCC_LFA_DISABLED; + } + + /* Verify that link is up */ + link_status = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + port_mb[params->port].link_status)); + if (!(link_status & LINK_STATUS_LINK_UP)) + return LFA_LINK_DOWN; + + /* if loaded after BOOT from SAN, don't flap the link in any case and + * rely on link set by preboot driver + */ + if (params->feature_config_flags & ELINK_FEATURE_CONFIG_BOOT_FROM_SAN) + return 0; + + /* Verify that loopback mode is not set */ + if (params->loopback_mode) + return LFA_LOOPBACK_ENABLED; + + /* Verify that MFW supports LFA */ + if (!params->lfa_base) + return LFA_MFW_IS_TOO_OLD; + + if (params->num_phys == 3) { + cfg_size = 2; + lfa_mask = 0xffffffff; + } else { + cfg_size = 1; + lfa_mask = 0xffff; + } + + /* Compare Duplex */ + saved_val = REG_RD(sc, params->lfa_base + + offsetof(struct shmem_lfa, req_duplex)); + req_val = params->req_duplex[0] | (params->req_duplex[1] << 16); + if ((saved_val & lfa_mask) != (req_val & lfa_mask)) { + PMD_DRV_LOG(INFO, "Duplex mismatch %x vs. %x", + (saved_val & lfa_mask), (req_val & lfa_mask)); + return LFA_DUPLEX_MISMATCH; + } + /* Compare Flow Control */ + saved_val = REG_RD(sc, params->lfa_base + + offsetof(struct shmem_lfa, req_flow_ctrl)); + req_val = params->req_flow_ctrl[0] | (params->req_flow_ctrl[1] << 16); + if ((saved_val & lfa_mask) != (req_val & lfa_mask)) { + PMD_DRV_LOG(DEBUG, "Flow control mismatch %x vs. %x", + (saved_val & lfa_mask), (req_val & lfa_mask)); + return LFA_FLOW_CTRL_MISMATCH; + } + /* Compare Link Speed */ + saved_val = REG_RD(sc, params->lfa_base + + offsetof(struct shmem_lfa, req_line_speed)); + req_val = params->req_line_speed[0] | (params->req_line_speed[1] << 16); + if ((saved_val & lfa_mask) != (req_val & lfa_mask)) { + PMD_DRV_LOG(DEBUG, "Link speed mismatch %x vs. %x", + (saved_val & lfa_mask), (req_val & lfa_mask)); + return LFA_LINK_SPEED_MISMATCH; + } + + for (cfg_idx = 0; cfg_idx < cfg_size; cfg_idx++) { + cur_speed_cap_mask = REG_RD(sc, params->lfa_base + + offsetof(struct shmem_lfa, + speed_cap_mask[cfg_idx])); + + if (cur_speed_cap_mask != params->speed_cap_mask[cfg_idx]) { + PMD_DRV_LOG(DEBUG, "Speed Cap mismatch %x vs. %x", + cur_speed_cap_mask, + params->speed_cap_mask[cfg_idx]); + return LFA_SPEED_CAP_MISMATCH; + } + } + + cur_req_fc_auto_adv = + REG_RD(sc, params->lfa_base + + offsetof(struct shmem_lfa, additional_config)) & + REQ_FC_AUTO_ADV_MASK; + + if ((uint16_t) cur_req_fc_auto_adv != params->req_fc_auto_adv) { + PMD_DRV_LOG(DEBUG, "Flow Ctrl AN mismatch %x vs. %x", + cur_req_fc_auto_adv, params->req_fc_auto_adv); + return LFA_FLOW_CTRL_MISMATCH; + } + + eee_status = REG_RD(sc, params->shmem2_base + + offsetof(struct shmem2_region, + eee_status[params->port])); + + if (((eee_status & SHMEM_EEE_LPI_REQUESTED_BIT) ^ + (params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI)) || + ((eee_status & SHMEM_EEE_REQUESTED_BIT) ^ + (params->eee_mode & ELINK_EEE_MODE_ADV_LPI))) { + PMD_DRV_LOG(DEBUG, "EEE mismatch %x vs. %x", params->eee_mode, + eee_status); + return LFA_EEE_MISMATCH; + } + + /* LFA conditions are met */ + return 0; +} + +/******************************************************************/ +/* EPIO/GPIO section */ +/******************************************************************/ +static void elink_get_epio(struct bnx2x_softc *sc, uint32_t epio_pin, + uint32_t * en) +{ + uint32_t epio_mask, gp_oenable; + *en = 0; + /* Sanity check */ + if (epio_pin > 31) { + PMD_DRV_LOG(DEBUG, "Invalid EPIO pin %d to get", epio_pin); + return; + } + + epio_mask = 1 << epio_pin; + /* Set this EPIO to output */ + gp_oenable = REG_RD(sc, MCP_REG_MCPR_GP_OENABLE); + REG_WR(sc, MCP_REG_MCPR_GP_OENABLE, gp_oenable & ~epio_mask); + + *en = (REG_RD(sc, MCP_REG_MCPR_GP_INPUTS) & epio_mask) >> epio_pin; +} + +static void elink_set_epio(struct bnx2x_softc *sc, uint32_t epio_pin, uint32_t en) +{ + uint32_t epio_mask, gp_output, gp_oenable; + + /* Sanity check */ + if (epio_pin > 31) { + PMD_DRV_LOG(DEBUG, "Invalid EPIO pin %d to set", epio_pin); + return; + } + PMD_DRV_LOG(DEBUG, "Setting EPIO pin %d to %d", epio_pin, en); + epio_mask = 1 << epio_pin; + /* Set this EPIO to output */ + gp_output = REG_RD(sc, MCP_REG_MCPR_GP_OUTPUTS); + if (en) + gp_output |= epio_mask; + else + gp_output &= ~epio_mask; + + REG_WR(sc, MCP_REG_MCPR_GP_OUTPUTS, gp_output); + + /* Set the value for this EPIO */ + gp_oenable = REG_RD(sc, MCP_REG_MCPR_GP_OENABLE); + REG_WR(sc, MCP_REG_MCPR_GP_OENABLE, gp_oenable | epio_mask); +} + +static void elink_set_cfg_pin(struct bnx2x_softc *sc, uint32_t pin_cfg, + uint32_t val) +{ + if (pin_cfg == PIN_CFG_NA) + return; + if (pin_cfg >= PIN_CFG_EPIO0) { + elink_set_epio(sc, pin_cfg - PIN_CFG_EPIO0, val); + } else { + uint8_t gpio_num = (pin_cfg - PIN_CFG_GPIO0_P0) & 0x3; + uint8_t gpio_port = (pin_cfg - PIN_CFG_GPIO0_P0) >> 2; + elink_cb_gpio_write(sc, gpio_num, (uint8_t) val, gpio_port); + } +} + +static uint32_t elink_get_cfg_pin(struct bnx2x_softc *sc, uint32_t pin_cfg, + uint32_t * val) +{ + if (pin_cfg == PIN_CFG_NA) + return ELINK_STATUS_ERROR; + if (pin_cfg >= PIN_CFG_EPIO0) { + elink_get_epio(sc, pin_cfg - PIN_CFG_EPIO0, val); + } else { + uint8_t gpio_num = (pin_cfg - PIN_CFG_GPIO0_P0) & 0x3; + uint8_t gpio_port = (pin_cfg - PIN_CFG_GPIO0_P0) >> 2; + *val = elink_cb_gpio_read(sc, gpio_num, gpio_port); + } + return ELINK_STATUS_OK; + +} + +/******************************************************************/ +/* PFC section */ +/******************************************************************/ +static void elink_update_pfc_xmac(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t xmac_base; + uint32_t pause_val, pfc0_val, pfc1_val; + + /* XMAC base adrr */ + xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + + /* Initialize pause and pfc registers */ + pause_val = 0x18000; + pfc0_val = 0xFFFF8000; + pfc1_val = 0x2; + + /* No PFC support */ + if (!(params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)) { + + /* RX flow control - Process pause frame in receive direction + */ + if (vars->flow_ctrl & ELINK_FLOW_CTRL_RX) + pause_val |= XMAC_PAUSE_CTRL_REG_RX_PAUSE_EN; + + /* TX flow control - Send pause packet when buffer is full */ + if (vars->flow_ctrl & ELINK_FLOW_CTRL_TX) + pause_val |= XMAC_PAUSE_CTRL_REG_TX_PAUSE_EN; + } else { /* PFC support */ + pfc1_val |= XMAC_PFC_CTRL_HI_REG_PFC_REFRESH_EN | + XMAC_PFC_CTRL_HI_REG_PFC_STATS_EN | + XMAC_PFC_CTRL_HI_REG_RX_PFC_EN | + XMAC_PFC_CTRL_HI_REG_TX_PFC_EN | + XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON; + /* Write pause and PFC registers */ + REG_WR(sc, xmac_base + XMAC_REG_PAUSE_CTRL, pause_val); + REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val); + REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL_HI, pfc1_val); + pfc1_val &= ~XMAC_PFC_CTRL_HI_REG_FORCE_PFC_XON; + + } + + /* Write pause and PFC registers */ + REG_WR(sc, xmac_base + XMAC_REG_PAUSE_CTRL, pause_val); + REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL, pfc0_val); + REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL_HI, pfc1_val); + + /* Set MAC address for source TX Pause/PFC frames */ + REG_WR(sc, xmac_base + XMAC_REG_CTRL_SA_LO, + ((params->mac_addr[2] << 24) | + (params->mac_addr[3] << 16) | + (params->mac_addr[4] << 8) | (params->mac_addr[5]))); + REG_WR(sc, xmac_base + XMAC_REG_CTRL_SA_HI, + ((params->mac_addr[0] << 8) | (params->mac_addr[1]))); + + DELAY(30); +} + +/******************************************************************/ +/* MAC/PBF section */ +/******************************************************************/ +static void elink_set_mdio_clk(struct bnx2x_softc *sc, uint32_t emac_base) +{ + uint32_t new_mode, cur_mode; + uint32_t clc_cnt; + /* Set clause 45 mode, slow down the MDIO clock to 2.5MHz + * (a value of 49==0x31) and make sure that the AUTO poll is off + */ + cur_mode = REG_RD(sc, emac_base + EMAC_REG_EMAC_MDIO_MODE); + + if (USES_WARPCORE(sc)) + clc_cnt = 74L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT; + else + clc_cnt = 49L << EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT; + + if (((cur_mode & EMAC_MDIO_MODE_CLOCK_CNT) == clc_cnt) && + (cur_mode & (EMAC_MDIO_MODE_CLAUSE_45))) + return; + + new_mode = cur_mode & + ~(EMAC_MDIO_MODE_AUTO_POLL | EMAC_MDIO_MODE_CLOCK_CNT); + new_mode |= clc_cnt; + new_mode |= (EMAC_MDIO_MODE_CLAUSE_45); + + PMD_DRV_LOG(DEBUG, "Changing emac_mode from 0x%x to 0x%x", + cur_mode, new_mode); + REG_WR(sc, emac_base + EMAC_REG_EMAC_MDIO_MODE, new_mode); + DELAY(40); +} + +static void elink_set_mdio_emac_per_phy(struct bnx2x_softc *sc, + struct elink_params *params) +{ + uint8_t phy_index; + /* Set mdio clock per phy */ + for (phy_index = ELINK_INT_PHY; phy_index < params->num_phys; + phy_index++) + elink_set_mdio_clk(sc, params->phy[phy_index].mdio_ctrl); +} + +static uint8_t elink_is_4_port_mode(struct bnx2x_softc *sc) +{ + uint32_t port4mode_ovwr_val; + /* Check 4-port override enabled */ + port4mode_ovwr_val = REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR); + if (port4mode_ovwr_val & (1 << 0)) { + /* Return 4-port mode override value */ + return (port4mode_ovwr_val & (1 << 1)) == (1 << 1); + } + /* Return 4-port mode from input pin */ + return (uint8_t) REG_RD(sc, MISC_REG_PORT4MODE_EN); +} + +static void elink_emac_init(struct elink_params *params) +{ + /* reset and unreset the emac core */ + struct bnx2x_softc *sc = params->sc; + uint8_t port = params->port; + uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + uint32_t val; + uint16_t timeout; + + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); + DELAY(5); + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + (MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE << port)); + + /* init emac - use read-modify-write */ + /* self clear reset */ + val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE); + elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MODE, + (val | EMAC_MODE_RESET)); + + timeout = 200; + do { + val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE); + PMD_DRV_LOG(DEBUG, "EMAC reset reg is %u", val); + if (!timeout) { + PMD_DRV_LOG(DEBUG, "EMAC timeout!"); + return; + } + timeout--; + } while (val & EMAC_MODE_RESET); + + elink_set_mdio_emac_per_phy(sc, params); + /* Set mac address */ + val = ((params->mac_addr[0] << 8) | params->mac_addr[1]); + elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MAC_MATCH, val); + + val = ((params->mac_addr[2] << 24) | + (params->mac_addr[3] << 16) | + (params->mac_addr[4] << 8) | params->mac_addr[5]); + elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MAC_MATCH + 4, val); +} + +static void elink_set_xumac_nig(struct elink_params *params, + uint16_t tx_pause_en, uint8_t enable) +{ + struct bnx2x_softc *sc = params->sc; + + REG_WR(sc, params->port ? NIG_REG_P1_MAC_IN_EN : NIG_REG_P0_MAC_IN_EN, + enable); + REG_WR(sc, params->port ? NIG_REG_P1_MAC_OUT_EN : NIG_REG_P0_MAC_OUT_EN, + enable); + REG_WR(sc, params->port ? NIG_REG_P1_MAC_PAUSE_OUT_EN : + NIG_REG_P0_MAC_PAUSE_OUT_EN, tx_pause_en); +} + +static void elink_set_umac_rxtx(struct elink_params *params, uint8_t en) +{ + uint32_t umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; + uint32_t val; + struct bnx2x_softc *sc = params->sc; + if (!(REG_RD(sc, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port))) + return; + val = REG_RD(sc, umac_base + UMAC_REG_COMMAND_CONFIG); + if (en) + val |= (UMAC_COMMAND_CONFIG_REG_TX_ENA | + UMAC_COMMAND_CONFIG_REG_RX_ENA); + else + val &= ~(UMAC_COMMAND_CONFIG_REG_TX_ENA | + UMAC_COMMAND_CONFIG_REG_RX_ENA); + /* Disable RX and TX */ + REG_WR(sc, umac_base + UMAC_REG_COMMAND_CONFIG, val); +} + +static void elink_umac_enable(struct elink_params *params, + struct elink_vars *vars, uint8_t lb) +{ + uint32_t val; + uint32_t umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; + struct bnx2x_softc *sc = params->sc; + /* Reset UMAC */ + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)); + DELAY(1000 * 1); + + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)); + + PMD_DRV_LOG(DEBUG, "enabling UMAC"); + + /* This register opens the gate for the UMAC despite its name */ + REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + params->port * 4, 1); + + val = UMAC_COMMAND_CONFIG_REG_PROMIS_EN | + UMAC_COMMAND_CONFIG_REG_PAD_EN | + UMAC_COMMAND_CONFIG_REG_SW_RESET | + UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK; + switch (vars->line_speed) { + case ELINK_SPEED_10: + val |= (0 << 2); + break; + case ELINK_SPEED_100: + val |= (1 << 2); + break; + case ELINK_SPEED_1000: + val |= (2 << 2); + break; + case ELINK_SPEED_2500: + val |= (3 << 2); + break; + default: + PMD_DRV_LOG(DEBUG, "Invalid speed for UMAC %d", + vars->line_speed); + break; + } + if (!(vars->flow_ctrl & ELINK_FLOW_CTRL_TX)) + val |= UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE; + + if (!(vars->flow_ctrl & ELINK_FLOW_CTRL_RX)) + val |= UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE; + + if (vars->duplex == DUPLEX_HALF) + val |= UMAC_COMMAND_CONFIG_REG_HD_ENA; + + REG_WR(sc, umac_base + UMAC_REG_COMMAND_CONFIG, val); + DELAY(50); + + /* Configure UMAC for EEE */ + if (vars->eee_status & SHMEM_EEE_ADV_STATUS_MASK) { + PMD_DRV_LOG(DEBUG, "configured UMAC for EEE"); + REG_WR(sc, umac_base + UMAC_REG_UMAC_EEE_CTRL, + UMAC_UMAC_EEE_CTRL_REG_EEE_EN); + REG_WR(sc, umac_base + UMAC_REG_EEE_WAKE_TIMER, 0x11); + } else { + REG_WR(sc, umac_base + UMAC_REG_UMAC_EEE_CTRL, 0x0); + } + + /* Set MAC address for source TX Pause/PFC frames (under SW reset) */ + REG_WR(sc, umac_base + UMAC_REG_MAC_ADDR0, + ((params->mac_addr[2] << 24) | + (params->mac_addr[3] << 16) | + (params->mac_addr[4] << 8) | (params->mac_addr[5]))); + REG_WR(sc, umac_base + UMAC_REG_MAC_ADDR1, + ((params->mac_addr[0] << 8) | (params->mac_addr[1]))); + + /* Enable RX and TX */ + val &= ~UMAC_COMMAND_CONFIG_REG_PAD_EN; + val |= UMAC_COMMAND_CONFIG_REG_TX_ENA | UMAC_COMMAND_CONFIG_REG_RX_ENA; + REG_WR(sc, umac_base + UMAC_REG_COMMAND_CONFIG, val); + DELAY(50); + + /* Remove SW Reset */ + val &= ~UMAC_COMMAND_CONFIG_REG_SW_RESET; + + /* Check loopback mode */ + if (lb) + val |= UMAC_COMMAND_CONFIG_REG_LOOP_ENA; + REG_WR(sc, umac_base + UMAC_REG_COMMAND_CONFIG, val); + + /* Maximum Frame Length (RW). Defines a 14-Bit maximum frame + * length used by the MAC receive logic to check frames. + */ + REG_WR(sc, umac_base + UMAC_REG_MAXFR, 0x2710); + elink_set_xumac_nig(params, + ((vars->flow_ctrl & ELINK_FLOW_CTRL_TX) != 0), 1); + vars->mac_type = ELINK_MAC_TYPE_UMAC; + +} + +/* Define the XMAC mode */ +static void elink_xmac_init(struct elink_params *params, uint32_t max_speed) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t is_port4mode = elink_is_4_port_mode(sc); + + /* In 4-port mode, need to set the mode only once, so if XMAC is + * already out of reset, it means the mode has already been set, + * and it must not* reset the XMAC again, since it controls both + * ports of the path + */ + + if (((CHIP_NUM(sc) == CHIP_NUM_57840_4_10) || + (CHIP_NUM(sc) == CHIP_NUM_57840_2_20) || + (CHIP_NUM(sc) == CHIP_NUM_57840_OBS)) && + is_port4mode && + (REG_RD(sc, MISC_REG_RESET_REG_2) & + MISC_REGISTERS_RESET_REG_2_XMAC)) { + PMD_DRV_LOG(DEBUG, "XMAC already out of reset in 4-port mode"); + return; + } + + /* Hard reset */ + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + MISC_REGISTERS_RESET_REG_2_XMAC); + DELAY(1000 * 1); + + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + MISC_REGISTERS_RESET_REG_2_XMAC); + if (is_port4mode) { + PMD_DRV_LOG(DEBUG, "Init XMAC to 2 ports x 10G per path"); + + /* Set the number of ports on the system side to up to 2 */ + REG_WR(sc, MISC_REG_XMAC_CORE_PORT_MODE, 1); + + /* Set the number of ports on the Warp Core to 10G */ + REG_WR(sc, MISC_REG_XMAC_PHY_PORT_MODE, 3); + } else { + /* Set the number of ports on the system side to 1 */ + REG_WR(sc, MISC_REG_XMAC_CORE_PORT_MODE, 0); + if (max_speed == ELINK_SPEED_10000) { + PMD_DRV_LOG(DEBUG, + "Init XMAC to 10G x 1 port per path"); + /* Set the number of ports on the Warp Core to 10G */ + REG_WR(sc, MISC_REG_XMAC_PHY_PORT_MODE, 3); + } else { + PMD_DRV_LOG(DEBUG, + "Init XMAC to 20G x 2 ports per path"); + /* Set the number of ports on the Warp Core to 20G */ + REG_WR(sc, MISC_REG_XMAC_PHY_PORT_MODE, 1); + } + } + /* Soft reset */ + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + MISC_REGISTERS_RESET_REG_2_XMAC_SOFT); + DELAY(1000 * 1); + + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + MISC_REGISTERS_RESET_REG_2_XMAC_SOFT); + +} + +static void elink_set_xmac_rxtx(struct elink_params *params, uint8_t en) +{ + uint8_t port = params->port; + struct bnx2x_softc *sc = params->sc; + uint32_t pfc_ctrl, xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + uint32_t val; + + if (REG_RD(sc, MISC_REG_RESET_REG_2) & MISC_REGISTERS_RESET_REG_2_XMAC) { + /* Send an indication to change the state in the NIG back to XON + * Clearing this bit enables the next set of this bit to get + * rising edge + */ + pfc_ctrl = REG_RD(sc, xmac_base + XMAC_REG_PFC_CTRL_HI); + REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL_HI, + (pfc_ctrl & ~(1 << 1))); + REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL_HI, + (pfc_ctrl | (1 << 1))); + PMD_DRV_LOG(DEBUG, "Disable XMAC on port %x", port); + val = REG_RD(sc, xmac_base + XMAC_REG_CTRL); + if (en) + val |= (XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN); + else + val &= ~(XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN); + REG_WR(sc, xmac_base + XMAC_REG_CTRL, val); + } +} + +static elink_status_t elink_xmac_enable(struct elink_params *params, + struct elink_vars *vars, uint8_t lb) +{ + uint32_t val, xmac_base; + struct bnx2x_softc *sc = params->sc; + PMD_DRV_LOG(DEBUG, "enabling XMAC"); + + xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + + elink_xmac_init(params, vars->line_speed); + + /* This register determines on which events the MAC will assert + * error on the i/f to the NIG along w/ EOP. + */ + + /* This register tells the NIG whether to send traffic to UMAC + * or XMAC + */ + REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + params->port * 4, 0); + + /* When XMAC is in XLGMII mode, disable sending idles for fault + * detection. + */ + if (!(params->phy[ELINK_INT_PHY].flags & ELINK_FLAGS_TX_ERROR_CHECK)) { + REG_WR(sc, xmac_base + XMAC_REG_RX_LSS_CTRL, + (XMAC_RX_LSS_CTRL_REG_LOCAL_FAULT_DISABLE | + XMAC_RX_LSS_CTRL_REG_REMOTE_FAULT_DISABLE)); + REG_WR(sc, xmac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0); + REG_WR(sc, xmac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, + XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS | + XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS); + } + /* Set Max packet size */ + REG_WR(sc, xmac_base + XMAC_REG_RX_MAX_SIZE, 0x2710); + + /* CRC append for Tx packets */ + REG_WR(sc, xmac_base + XMAC_REG_TX_CTRL, 0xC800); + + /* update PFC */ + elink_update_pfc_xmac(params, vars); + + if (vars->eee_status & SHMEM_EEE_ADV_STATUS_MASK) { + PMD_DRV_LOG(DEBUG, "Setting XMAC for EEE"); + REG_WR(sc, xmac_base + XMAC_REG_EEE_TIMERS_HI, 0x1380008); + REG_WR(sc, xmac_base + XMAC_REG_EEE_CTRL, 0x1); + } else { + REG_WR(sc, xmac_base + XMAC_REG_EEE_CTRL, 0x0); + } + + /* Enable TX and RX */ + val = XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN; + + /* Set MAC in XLGMII mode for dual-mode */ + if ((vars->line_speed == ELINK_SPEED_20000) && + (params->phy[ELINK_INT_PHY].supported & + ELINK_SUPPORTED_20000baseKR2_Full)) + val |= XMAC_CTRL_REG_XLGMII_ALIGN_ENB; + + /* Check loopback mode */ + if (lb) + val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK; + REG_WR(sc, xmac_base + XMAC_REG_CTRL, val); + elink_set_xumac_nig(params, + ((vars->flow_ctrl & ELINK_FLOW_CTRL_TX) != 0), 1); + + vars->mac_type = ELINK_MAC_TYPE_XMAC; + + return ELINK_STATUS_OK; +} + +static elink_status_t elink_emac_enable(struct elink_params *params, + struct elink_vars *vars, uint8_t lb) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t port = params->port; + uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + uint32_t val; + + PMD_DRV_LOG(DEBUG, "enabling EMAC"); + + /* Disable BMAC */ + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + + /* enable emac and not bmac */ + REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + port * 4, 1); + +#ifdef ELINK_INCLUDE_EMUL + /* for paladium */ + if (CHIP_REV_IS_EMUL(sc)) { + /* Use lane 1 (of lanes 0-3) */ + REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, 1); + REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1); + } + /* for fpga */ + else +#endif +#ifdef ELINK_INCLUDE_FPGA + if (CHIP_REV_IS_FPGA(sc)) { + /* Use lane 1 (of lanes 0-3) */ + PMD_DRV_LOG(DEBUG, "elink_emac_enable: Setting FPGA"); + + REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, 1); + REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 0); + } else +#endif + /* ASIC */ + if (vars->phy_flags & PHY_XGXS_FLAG) { + uint32_t ser_lane = ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); + + PMD_DRV_LOG(DEBUG, "XGXS"); + /* select the master lanes (out of 0-3) */ + REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, ser_lane); + /* select XGXS */ + REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1); + + } else { /* SerDes */ + PMD_DRV_LOG(DEBUG, "SerDes"); + /* select SerDes */ + REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 0); + } + + elink_bits_en(sc, emac_base + EMAC_REG_EMAC_RX_MODE, + EMAC_RX_MODE_RESET); + elink_bits_en(sc, emac_base + EMAC_REG_EMAC_TX_MODE, + EMAC_TX_MODE_RESET); + +#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA) + if (CHIP_REV_IS_SLOW(sc)) { + /* config GMII mode */ + val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE); + elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MODE, + (val | EMAC_MODE_PORT_GMII)); + } else { /* ASIC */ +#endif + /* pause enable/disable */ + elink_bits_dis(sc, emac_base + EMAC_REG_EMAC_RX_MODE, + EMAC_RX_MODE_FLOW_EN); + + elink_bits_dis(sc, emac_base + EMAC_REG_EMAC_TX_MODE, + (EMAC_TX_MODE_EXT_PAUSE_EN | + EMAC_TX_MODE_FLOW_EN)); + if (!(params->feature_config_flags & + ELINK_FEATURE_CONFIG_PFC_ENABLED)) { + if (vars->flow_ctrl & ELINK_FLOW_CTRL_RX) + elink_bits_en(sc, emac_base + + EMAC_REG_EMAC_RX_MODE, + EMAC_RX_MODE_FLOW_EN); + + if (vars->flow_ctrl & ELINK_FLOW_CTRL_TX) + elink_bits_en(sc, emac_base + + EMAC_REG_EMAC_TX_MODE, + (EMAC_TX_MODE_EXT_PAUSE_EN | + EMAC_TX_MODE_FLOW_EN)); + } else + elink_bits_en(sc, emac_base + EMAC_REG_EMAC_TX_MODE, + EMAC_TX_MODE_FLOW_EN); +#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA) + } +#endif + + /* KEEP_VLAN_TAG, promiscuous */ + val = REG_RD(sc, emac_base + EMAC_REG_EMAC_RX_MODE); + val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS; + + /* Setting this bit causes MAC control frames (except for pause + * frames) to be passed on for processing. This setting has no + * affect on the operation of the pause frames. This bit effects + * all packets regardless of RX Parser packet sorting logic. + * Turn the PFC off to make sure we are in Xon state before + * enabling it. + */ + elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_MODE, 0); + if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) { + PMD_DRV_LOG(DEBUG, "PFC is enabled"); + /* Enable PFC again */ + elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_MODE, + EMAC_REG_RX_PFC_MODE_RX_EN | + EMAC_REG_RX_PFC_MODE_TX_EN | + EMAC_REG_RX_PFC_MODE_PRIORITIES); + + elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_PARAM, + ((0x0101 << + EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT) | + (0x00ff << + EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT))); + val |= EMAC_RX_MODE_KEEP_MAC_CONTROL; + } + elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_RX_MODE, val); + + /* Set Loopback */ + val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE); + if (lb) + val |= 0x810; + else + val &= ~0x810; + elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_MODE, val); + + /* Enable emac */ + REG_WR(sc, NIG_REG_NIG_EMAC0_EN + port * 4, 1); + + /* Enable emac for jumbo packets */ + elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_RX_MTU_SIZE, + (EMAC_RX_MTU_SIZE_JUMBO_ENA | + (ELINK_ETH_MAX_JUMBO_PACKET_SIZE + + ELINK_ETH_OVREHEAD))); + + /* Strip CRC */ + REG_WR(sc, NIG_REG_NIG_INGRESS_EMAC0_NO_CRC + port * 4, 0x1); + + /* Disable the NIG in/out to the bmac */ + REG_WR(sc, NIG_REG_BMAC0_IN_EN + port * 4, 0x0); + REG_WR(sc, NIG_REG_BMAC0_PAUSE_OUT_EN + port * 4, 0x0); + REG_WR(sc, NIG_REG_BMAC0_OUT_EN + port * 4, 0x0); + + /* Enable the NIG in/out to the emac */ + REG_WR(sc, NIG_REG_EMAC0_IN_EN + port * 4, 0x1); + val = 0; + if ((params->feature_config_flags & + ELINK_FEATURE_CONFIG_PFC_ENABLED) || + (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)) + val = 1; + + REG_WR(sc, NIG_REG_EMAC0_PAUSE_OUT_EN + port * 4, val); + REG_WR(sc, NIG_REG_EGRESS_EMAC0_OUT_EN + port * 4, 0x1); + +#ifdef ELINK_INCLUDE_EMUL + if (CHIP_REV_IS_EMUL(sc)) { + /* Take the BigMac out of reset */ + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + + /* Enable access for bmac registers */ + REG_WR(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4, 0x1); + } else +#endif + REG_WR(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4, 0x0); + + vars->mac_type = ELINK_MAC_TYPE_EMAC; + return ELINK_STATUS_OK; +} + +static void elink_update_pfc_bmac1(struct elink_params *params, + struct elink_vars *vars) +{ + uint32_t wb_data[2]; + struct bnx2x_softc *sc = params->sc; + uint32_t bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + + uint32_t val = 0x14; + if ((!(params->feature_config_flags & + ELINK_FEATURE_CONFIG_PFC_ENABLED)) && + (vars->flow_ctrl & ELINK_FLOW_CTRL_RX)) + /* Enable BigMAC to react on received Pause packets */ + val |= (1 << 5); + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_RX_CONTROL, wb_data, 2); + + /* TX control */ + val = 0xc0; + if (!(params->feature_config_flags & + ELINK_FEATURE_CONFIG_PFC_ENABLED) && + (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)) + val |= 0x800000; + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_TX_CONTROL, wb_data, 2); +} + +static void elink_update_pfc_bmac2(struct elink_params *params, + struct elink_vars *vars, uint8_t is_lb) +{ + /* Set rx control: Strip CRC and enable BigMAC to relay + * control packets to the system as well + */ + uint32_t wb_data[2]; + struct bnx2x_softc *sc = params->sc; + uint32_t bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + uint32_t val = 0x14; + + if ((!(params->feature_config_flags & + ELINK_FEATURE_CONFIG_PFC_ENABLED)) && + (vars->flow_ctrl & ELINK_FLOW_CTRL_RX)) + /* Enable BigMAC to react on received Pause packets */ + val |= (1 << 5); + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_RX_CONTROL, wb_data, 2); + DELAY(30); + + /* Tx control */ + val = 0xc0; + if (!(params->feature_config_flags & + ELINK_FEATURE_CONFIG_PFC_ENABLED) && + (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)) + val |= 0x800000; + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_TX_CONTROL, wb_data, 2); + + if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) { + PMD_DRV_LOG(DEBUG, "PFC is enabled"); + /* Enable PFC RX & TX & STATS and set 8 COS */ + wb_data[0] = 0x0; + wb_data[0] |= (1 << 0); /* RX */ + wb_data[0] |= (1 << 1); /* TX */ + wb_data[0] |= (1 << 2); /* Force initial Xon */ + wb_data[0] |= (1 << 3); /* 8 cos */ + wb_data[0] |= (1 << 5); /* STATS */ + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_PFC_CONTROL, + wb_data, 2); + /* Clear the force Xon */ + wb_data[0] &= ~(1 << 2); + } else { + PMD_DRV_LOG(DEBUG, "PFC is disabled"); + /* Disable PFC RX & TX & STATS and set 8 COS */ + wb_data[0] = 0x8; + wb_data[1] = 0; + } + + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_PFC_CONTROL, wb_data, 2); + + /* Set Time (based unit is 512 bit time) between automatic + * re-sending of PP packets amd enable automatic re-send of + * Per-Priroity Packet as long as pp_gen is asserted and + * pp_disable is low. + */ + val = 0x8000; + if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) + val |= (1 << 16); /* enable automatic re-send */ + + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_TX_PAUSE_CONTROL, + wb_data, 2); + + /* mac control */ + val = 0x3; /* Enable RX and TX */ + if (is_lb) { + val |= 0x4; /* Local loopback */ + PMD_DRV_LOG(DEBUG, "enable bmac loopback"); + } + /* When PFC enabled, Pass pause frames towards the NIG. */ + if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) + val |= ((1 << 6) | (1 << 5)); + + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_BMAC_CONTROL, wb_data, 2); +} + +/****************************************************************************** +* Description: +* This function is needed because NIG ARB_CREDIT_WEIGHT_X are +* not continues and ARB_CREDIT_WEIGHT_0 + offset is suitable. +******************************************************************************/ +static elink_status_t elink_pfc_nig_rx_priority_mask(struct bnx2x_softc *sc, + uint8_t cos_entry, + uint32_t priority_mask, + uint8_t port) +{ + uint32_t nig_reg_rx_priority_mask_add = 0; + + switch (cos_entry) { + case 0: + nig_reg_rx_priority_mask_add = (port) ? + NIG_REG_P1_RX_COS0_PRIORITY_MASK : + NIG_REG_P0_RX_COS0_PRIORITY_MASK; + break; + case 1: + nig_reg_rx_priority_mask_add = (port) ? + NIG_REG_P1_RX_COS1_PRIORITY_MASK : + NIG_REG_P0_RX_COS1_PRIORITY_MASK; + break; + case 2: + nig_reg_rx_priority_mask_add = (port) ? + NIG_REG_P1_RX_COS2_PRIORITY_MASK : + NIG_REG_P0_RX_COS2_PRIORITY_MASK; + break; + case 3: + if (port) + return ELINK_STATUS_ERROR; + nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS3_PRIORITY_MASK; + break; + case 4: + if (port) + return ELINK_STATUS_ERROR; + nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS4_PRIORITY_MASK; + break; + case 5: + if (port) + return ELINK_STATUS_ERROR; + nig_reg_rx_priority_mask_add = NIG_REG_P0_RX_COS5_PRIORITY_MASK; + break; + } + + REG_WR(sc, nig_reg_rx_priority_mask_add, priority_mask); + + return ELINK_STATUS_OK; +} + +static void elink_update_mng(struct elink_params *params, uint32_t link_status) +{ + struct bnx2x_softc *sc = params->sc; + + REG_WR(sc, params->shmem_base + + offsetof(struct shmem_region, + port_mb[params->port].link_status), link_status); +} + +static void elink_update_link_attr(struct elink_params *params, + uint32_t link_attr) +{ + struct bnx2x_softc *sc = params->sc; + + if (SHMEM2_HAS(sc, link_attr_sync)) + REG_WR(sc, params->shmem2_base + + offsetof(struct shmem2_region, + link_attr_sync[params->port]), link_attr); +} + +static void elink_update_pfc_nig(struct elink_params *params, + struct elink_nig_brb_pfc_port_params + *nig_params) +{ + uint32_t xcm_mask = 0, ppp_enable = 0, pause_enable = 0, llfc_out_en = + 0; + uint32_t llfc_enable = 0, xcm_out_en = 0, hwpfc_enable = 0; + uint32_t pkt_priority_to_cos = 0; + struct bnx2x_softc *sc = params->sc; + uint8_t port = params->port; + + int set_pfc = params->feature_config_flags & + ELINK_FEATURE_CONFIG_PFC_ENABLED; + PMD_DRV_LOG(DEBUG, "updating pfc nig parameters"); + + /* When NIG_LLH0_XCM_MASK_REG_LLHX_XCM_MASK_BCN bit is set + * MAC control frames (that are not pause packets) + * will be forwarded to the XCM. + */ + xcm_mask = REG_RD(sc, port ? NIG_REG_LLH1_XCM_MASK : + NIG_REG_LLH0_XCM_MASK); + /* NIG params will override non PFC params, since it's possible to + * do transition from PFC to SAFC + */ + if (set_pfc) { + pause_enable = 0; + llfc_out_en = 0; + llfc_enable = 0; + if (CHIP_IS_E3(sc)) + ppp_enable = 0; + else + ppp_enable = 1; + xcm_mask &= ~(port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN : + NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN); + xcm_out_en = 0; + hwpfc_enable = 1; + } else { + if (nig_params) { + llfc_out_en = nig_params->llfc_out_en; + llfc_enable = nig_params->llfc_enable; + pause_enable = nig_params->pause_enable; + } else /* Default non PFC mode - PAUSE */ + pause_enable = 1; + + xcm_mask |= (port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN : + NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN); + xcm_out_en = 1; + } + + if (CHIP_IS_E3(sc)) + REG_WR(sc, port ? NIG_REG_BRB1_PAUSE_IN_EN : + NIG_REG_BRB0_PAUSE_IN_EN, pause_enable); + REG_WR(sc, port ? NIG_REG_LLFC_OUT_EN_1 : + NIG_REG_LLFC_OUT_EN_0, llfc_out_en); + REG_WR(sc, port ? NIG_REG_LLFC_ENABLE_1 : + NIG_REG_LLFC_ENABLE_0, llfc_enable); + REG_WR(sc, port ? NIG_REG_PAUSE_ENABLE_1 : + NIG_REG_PAUSE_ENABLE_0, pause_enable); + + REG_WR(sc, port ? NIG_REG_PPP_ENABLE_1 : + NIG_REG_PPP_ENABLE_0, ppp_enable); + + REG_WR(sc, port ? NIG_REG_LLH1_XCM_MASK : + NIG_REG_LLH0_XCM_MASK, xcm_mask); + + REG_WR(sc, port ? NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 : + NIG_REG_LLFC_EGRESS_SRC_ENABLE_0, 0x7); + + /* Output enable for RX_XCM # IF */ + REG_WR(sc, port ? NIG_REG_XCM1_OUT_EN : + NIG_REG_XCM0_OUT_EN, xcm_out_en); + + /* HW PFC TX enable */ + REG_WR(sc, port ? NIG_REG_P1_HWPFC_ENABLE : + NIG_REG_P0_HWPFC_ENABLE, hwpfc_enable); + + if (nig_params) { + uint8_t i = 0; + pkt_priority_to_cos = nig_params->pkt_priority_to_cos; + + for (i = 0; i < nig_params->num_of_rx_cos_priority_mask; i++) + elink_pfc_nig_rx_priority_mask(sc, i, + nig_params-> + rx_cos_priority_mask[i], + port); + + REG_WR(sc, port ? NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 : + NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0, + nig_params->llfc_high_priority_classes); + + REG_WR(sc, port ? NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 : + NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0, + nig_params->llfc_low_priority_classes); + } + REG_WR(sc, port ? NIG_REG_P1_PKT_PRIORITY_TO_COS : + NIG_REG_P0_PKT_PRIORITY_TO_COS, pkt_priority_to_cos); +} + +elink_status_t elink_update_pfc(struct elink_params *params, + struct elink_vars *vars, + struct elink_nig_brb_pfc_port_params + *pfc_params) +{ + /* The PFC and pause are orthogonal to one another, meaning when + * PFC is enabled, the pause are disabled, and when PFC is + * disabled, pause are set according to the pause result. + */ + uint32_t val; + struct bnx2x_softc *sc = params->sc; + elink_status_t elink_status = ELINK_STATUS_OK; + uint8_t bmac_loopback = (params->loopback_mode == ELINK_LOOPBACK_BMAC); + + if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) + vars->link_status |= LINK_STATUS_PFC_ENABLED; + else + vars->link_status &= ~LINK_STATUS_PFC_ENABLED; + + elink_update_mng(params, vars->link_status); + + /* Update NIG params */ + elink_update_pfc_nig(params, pfc_params); + + if (!vars->link_up) + return elink_status; + + PMD_DRV_LOG(DEBUG, "About to update PFC in BMAC"); + + if (CHIP_IS_E3(sc)) { + if (vars->mac_type == ELINK_MAC_TYPE_XMAC) + elink_update_pfc_xmac(params, vars); + } else { + val = REG_RD(sc, MISC_REG_RESET_REG_2); + if ((val & + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) + == 0) { + PMD_DRV_LOG(DEBUG, "About to update PFC in EMAC"); + elink_emac_enable(params, vars, 0); + return elink_status; + } + if (CHIP_IS_E2(sc)) + elink_update_pfc_bmac2(params, vars, bmac_loopback); + else + elink_update_pfc_bmac1(params, vars); + + val = 0; + if ((params->feature_config_flags & + ELINK_FEATURE_CONFIG_PFC_ENABLED) || + (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)) + val = 1; + REG_WR(sc, NIG_REG_BMAC0_PAUSE_OUT_EN + params->port * 4, val); + } + return elink_status; +} + +static elink_status_t elink_bmac1_enable(struct elink_params *params, + struct elink_vars *vars, uint8_t is_lb) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t port = params->port; + uint32_t bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + uint32_t wb_data[2]; + uint32_t val; + + PMD_DRV_LOG(DEBUG, "Enabling BigMAC1"); + + /* XGXS control */ + wb_data[0] = 0x3c; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_BMAC_XGXS_CONTROL, + wb_data, 2); + + /* TX MAC SA */ + wb_data[0] = ((params->mac_addr[2] << 24) | + (params->mac_addr[3] << 16) | + (params->mac_addr[4] << 8) | params->mac_addr[5]); + wb_data[1] = ((params->mac_addr[0] << 8) | params->mac_addr[1]); + REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR, wb_data, 2); + + /* MAC control */ + val = 0x3; + if (is_lb) { + val |= 0x4; + PMD_DRV_LOG(DEBUG, "enable bmac loopback"); + } + wb_data[0] = val; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_BMAC_CONTROL, wb_data, 2); + + /* Set rx mtu */ + wb_data[0] = ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE, wb_data, 2); + + elink_update_pfc_bmac1(params, vars); + + /* Set tx mtu */ + wb_data[0] = ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_TX_MAX_SIZE, wb_data, 2); + + /* Set cnt max size */ + wb_data[0] = ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_CNT_MAX_SIZE, wb_data, 2); + + /* Configure SAFC */ + wb_data[0] = 0x1000200; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS, + wb_data, 2); +#ifdef ELINK_INCLUDE_EMUL + /* Fix for emulation */ + if (CHIP_REV_IS_EMUL(sc)) { + wb_data[0] = 0xf000; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC_REGISTER_TX_PAUSE_THRESHOLD, + wb_data, 2); + } +#endif + + return ELINK_STATUS_OK; +} + +static elink_status_t elink_bmac2_enable(struct elink_params *params, + struct elink_vars *vars, uint8_t is_lb) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t port = params->port; + uint32_t bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + uint32_t wb_data[2]; + + PMD_DRV_LOG(DEBUG, "Enabling BigMAC2"); + + wb_data[0] = 0; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_BMAC_CONTROL, wb_data, 2); + DELAY(30); + + /* XGXS control: Reset phy HW, MDIO registers, PHY PLL and BMAC */ + wb_data[0] = 0x3c; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_BMAC_XGXS_CONTROL, + wb_data, 2); + + DELAY(30); + + /* TX MAC SA */ + wb_data[0] = ((params->mac_addr[2] << 24) | + (params->mac_addr[3] << 16) | + (params->mac_addr[4] << 8) | params->mac_addr[5]); + wb_data[1] = ((params->mac_addr[0] << 8) | params->mac_addr[1]); + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_TX_SOURCE_ADDR, + wb_data, 2); + + DELAY(30); + + /* Configure SAFC */ + wb_data[0] = 0x1000200; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS, + wb_data, 2); + DELAY(30); + + /* Set RX MTU */ + wb_data[0] = ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_RX_MAX_SIZE, wb_data, 2); + DELAY(30); + + /* Set TX MTU */ + wb_data[0] = ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_TX_MAX_SIZE, wb_data, 2); + DELAY(30); + /* Set cnt max size */ + wb_data[0] = ELINK_ETH_MAX_JUMBO_PACKET_SIZE + ELINK_ETH_OVREHEAD - 2; + wb_data[1] = 0; + REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_CNT_MAX_SIZE, wb_data, 2); + DELAY(30); + elink_update_pfc_bmac2(params, vars, is_lb); + + return ELINK_STATUS_OK; +} + +static elink_status_t elink_bmac_enable(struct elink_params *params, + struct elink_vars *vars, + uint8_t is_lb, uint8_t reset_bmac) +{ + elink_status_t rc = ELINK_STATUS_OK; + uint8_t port = params->port; + struct bnx2x_softc *sc = params->sc; + uint32_t val; + /* Reset and unreset the BigMac */ + if (reset_bmac) { + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + DELAY(1000 * 1); + } + + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + + /* Enable access for bmac registers */ + REG_WR(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4, 0x1); + + /* Enable BMAC according to BMAC type */ + if (CHIP_IS_E2(sc)) + rc = elink_bmac2_enable(params, vars, is_lb); + else + rc = elink_bmac1_enable(params, vars, is_lb); + REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 0x1); + REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, 0x0); + REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + port * 4, 0x0); + val = 0; + if ((params->feature_config_flags & + ELINK_FEATURE_CONFIG_PFC_ENABLED) || + (vars->flow_ctrl & ELINK_FLOW_CTRL_TX)) + val = 1; + REG_WR(sc, NIG_REG_BMAC0_PAUSE_OUT_EN + port * 4, val); + REG_WR(sc, NIG_REG_EGRESS_EMAC0_OUT_EN + port * 4, 0x0); + REG_WR(sc, NIG_REG_EMAC0_IN_EN + port * 4, 0x0); + REG_WR(sc, NIG_REG_EMAC0_PAUSE_OUT_EN + port * 4, 0x0); + REG_WR(sc, NIG_REG_BMAC0_IN_EN + port * 4, 0x1); + REG_WR(sc, NIG_REG_BMAC0_OUT_EN + port * 4, 0x1); + + vars->mac_type = ELINK_MAC_TYPE_BMAC; + return rc; +} + +static void elink_set_bmac_rx(struct bnx2x_softc *sc, uint8_t port, uint8_t en) +{ + uint32_t bmac_addr = port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + uint32_t wb_data[2]; + uint32_t nig_bmac_enable = + REG_RD(sc, NIG_REG_BMAC0_REGS_OUT_EN + port * 4); + + if (CHIP_IS_E2(sc)) + bmac_addr += BIGMAC2_REGISTER_BMAC_CONTROL; + else + bmac_addr += BIGMAC_REGISTER_BMAC_CONTROL; + /* Only if the bmac is out of reset */ + if (REG_RD(sc, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port) && nig_bmac_enable) { + /* Clear Rx Enable bit in BMAC_CONTROL register */ + REG_RD_DMAE(sc, bmac_addr, wb_data, 2); + if (en) + wb_data[0] |= ELINK_BMAC_CONTROL_RX_ENABLE; + else + wb_data[0] &= ~ELINK_BMAC_CONTROL_RX_ENABLE; + REG_WR_DMAE(sc, bmac_addr, wb_data, 2); + DELAY(1000 * 1); + } +} + +static elink_status_t elink_pbf_update(struct elink_params *params, + uint32_t flow_ctrl, uint32_t line_speed) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t port = params->port; + uint32_t init_crd, crd; + uint32_t count = 1000; + + /* Disable port */ + REG_WR(sc, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port * 4, 0x1); + + /* Wait for init credit */ + init_crd = REG_RD(sc, PBF_REG_P0_INIT_CRD + port * 4); + crd = REG_RD(sc, PBF_REG_P0_CREDIT + port * 8); + PMD_DRV_LOG(DEBUG, "init_crd 0x%x crd 0x%x", init_crd, crd); + + while ((init_crd != crd) && count) { + DELAY(1000 * 5); + crd = REG_RD(sc, PBF_REG_P0_CREDIT + port * 8); + count--; + } + crd = REG_RD(sc, PBF_REG_P0_CREDIT + port * 8); + if (init_crd != crd) { + PMD_DRV_LOG(DEBUG, "BUG! init_crd 0x%x != crd 0x%x", + init_crd, crd); + return ELINK_STATUS_ERROR; + } + + if (flow_ctrl & ELINK_FLOW_CTRL_RX || + line_speed == ELINK_SPEED_10 || + line_speed == ELINK_SPEED_100 || + line_speed == ELINK_SPEED_1000 || line_speed == ELINK_SPEED_2500) { + REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 1); + /* Update threshold */ + REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, 0); + /* Update init credit */ + init_crd = 778; /* (800-18-4) */ + + } else { + uint32_t thresh = (ELINK_ETH_MAX_JUMBO_PACKET_SIZE + + ELINK_ETH_OVREHEAD) / 16; + REG_WR(sc, PBF_REG_P0_PAUSE_ENABLE + port * 4, 0); + /* Update threshold */ + REG_WR(sc, PBF_REG_P0_ARB_THRSH + port * 4, thresh); + /* Update init credit */ + switch (line_speed) { + case ELINK_SPEED_10000: + init_crd = thresh + 553 - 22; + break; + default: + PMD_DRV_LOG(DEBUG, "Invalid line_speed 0x%x", + line_speed); + return ELINK_STATUS_ERROR; + } + } + REG_WR(sc, PBF_REG_P0_INIT_CRD + port * 4, init_crd); + PMD_DRV_LOG(DEBUG, "PBF updated to speed %d credit %d", + line_speed, init_crd); + + /* Probe the credit changes */ + REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 0x1); + DELAY(1000 * 5); + REG_WR(sc, PBF_REG_INIT_P0 + port * 4, 0x0); + + /* Enable port */ + REG_WR(sc, PBF_REG_DISABLE_NEW_TASK_PROC_P0 + port * 4, 0x0); + return ELINK_STATUS_OK; +} + +/** + * elink_get_emac_base - retrive emac base address + * + * @bp: driver handle + * @mdc_mdio_access: access type + * @port: port id + * + * This function selects the MDC/MDIO access (through emac0 or + * emac1) depend on the mdc_mdio_access, port, port swapped. Each + * phy has a default access mode, which could also be overridden + * by nvram configuration. This parameter, whether this is the + * default phy configuration, or the nvram overrun + * configuration, is passed here as mdc_mdio_access and selects + * the emac_base for the CL45 read/writes operations + */ +static uint32_t elink_get_emac_base(struct bnx2x_softc *sc, + uint32_t mdc_mdio_access, uint8_t port) +{ + uint32_t emac_base = 0; + switch (mdc_mdio_access) { + case SHARED_HW_CFG_MDC_MDIO_ACCESS1_PHY_TYPE: + break; + case SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC0: + if (REG_RD(sc, NIG_REG_PORT_SWAP)) + emac_base = GRCBASE_EMAC1; + else + emac_base = GRCBASE_EMAC0; + break; + case SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1: + if (REG_RD(sc, NIG_REG_PORT_SWAP)) + emac_base = GRCBASE_EMAC0; + else + emac_base = GRCBASE_EMAC1; + break; + case SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH: + emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + break; + case SHARED_HW_CFG_MDC_MDIO_ACCESS1_SWAPPED: + emac_base = (port) ? GRCBASE_EMAC0 : GRCBASE_EMAC1; + break; + default: + break; + } + return emac_base; + +} + +/******************************************************************/ +/* CL22 access functions */ +/******************************************************************/ +static elink_status_t elink_cl22_write(struct bnx2x_softc *sc, + struct elink_phy *phy, + uint16_t reg, uint16_t val) +{ + uint32_t tmp, mode; + uint8_t i; + elink_status_t rc = ELINK_STATUS_OK; + /* Switch to CL22 */ + mode = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, + mode & ~EMAC_MDIO_MODE_CLAUSE_45); + + /* Address */ + tmp = ((phy->addr << 21) | (reg << 16) | val | + EMAC_MDIO_COMM_COMMAND_WRITE_22 | EMAC_MDIO_COMM_START_BUSY); + REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); + + for (i = 0; i < 50; i++) { + DELAY(10); + + tmp = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); + if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { + DELAY(5); + break; + } + } + if (tmp & EMAC_MDIO_COMM_START_BUSY) { + PMD_DRV_LOG(DEBUG, "write phy register failed"); + rc = ELINK_STATUS_TIMEOUT; + } + REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode); + return rc; +} + +static elink_status_t elink_cl22_read(struct bnx2x_softc *sc, + struct elink_phy *phy, + uint16_t reg, uint16_t * ret_val) +{ + uint32_t val, mode; + uint16_t i; + elink_status_t rc = ELINK_STATUS_OK; + + /* Switch to CL22 */ + mode = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE); + REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, + mode & ~EMAC_MDIO_MODE_CLAUSE_45); + + /* Address */ + val = ((phy->addr << 21) | (reg << 16) | + EMAC_MDIO_COMM_COMMAND_READ_22 | EMAC_MDIO_COMM_START_BUSY); + REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); + + for (i = 0; i < 50; i++) { + DELAY(10); + + val = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); + if (!(val & EMAC_MDIO_COMM_START_BUSY)) { + *ret_val = (uint16_t) (val & EMAC_MDIO_COMM_DATA); + DELAY(5); + break; + } + } + if (val & EMAC_MDIO_COMM_START_BUSY) { + PMD_DRV_LOG(DEBUG, "read phy register failed"); + + *ret_val = 0; + rc = ELINK_STATUS_TIMEOUT; + } + REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode); + return rc; +} + +/******************************************************************/ +/* CL45 access functions */ +/******************************************************************/ +static elink_status_t elink_cl45_read(struct bnx2x_softc *sc, + struct elink_phy *phy, uint8_t devad, + uint16_t reg, uint16_t * ret_val) +{ + uint32_t val; + uint16_t i; + elink_status_t rc = ELINK_STATUS_OK; + if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_G) { + elink_set_mdio_clk(sc, phy->mdio_ctrl); + } + + if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_B0) + elink_bits_en(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); + /* Address */ + val = ((phy->addr << 21) | (devad << 16) | reg | + EMAC_MDIO_COMM_COMMAND_ADDRESS | EMAC_MDIO_COMM_START_BUSY); + REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); + + for (i = 0; i < 50; i++) { + DELAY(10); + + val = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); + if (!(val & EMAC_MDIO_COMM_START_BUSY)) { + DELAY(5); + break; + } + } + if (val & EMAC_MDIO_COMM_START_BUSY) { + PMD_DRV_LOG(DEBUG, "read phy register failed"); + elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout" + + *ret_val = 0; + rc = ELINK_STATUS_TIMEOUT; + } else { + /* Data */ + val = ((phy->addr << 21) | (devad << 16) | + EMAC_MDIO_COMM_COMMAND_READ_45 | + EMAC_MDIO_COMM_START_BUSY); + REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, val); + + for (i = 0; i < 50; i++) { + DELAY(10); + + val = REG_RD(sc, phy->mdio_ctrl + + EMAC_REG_EMAC_MDIO_COMM); + if (!(val & EMAC_MDIO_COMM_START_BUSY)) { + *ret_val = + (uint16_t) (val & EMAC_MDIO_COMM_DATA); + break; + } + } + if (val & EMAC_MDIO_COMM_START_BUSY) { + PMD_DRV_LOG(DEBUG, "read phy register failed"); + elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout" + + *ret_val = 0; + rc = ELINK_STATUS_TIMEOUT; + } + } + /* Work around for E3 A0 */ + if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA) { + phy->flags ^= ELINK_FLAGS_DUMMY_READ; + if (phy->flags & ELINK_FLAGS_DUMMY_READ) { + uint16_t temp_val; + elink_cl45_read(sc, phy, devad, 0xf, &temp_val); + } + } + + if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_B0) + elink_bits_dis(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); + return rc; +} + +static elink_status_t elink_cl45_write(struct bnx2x_softc *sc, + struct elink_phy *phy, uint8_t devad, + uint16_t reg, uint16_t val) +{ + uint32_t tmp; + uint8_t i; + elink_status_t rc = ELINK_STATUS_OK; + if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_G) { + elink_set_mdio_clk(sc, phy->mdio_ctrl); + } + + if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_B0) + elink_bits_en(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); + + /* Address */ + tmp = ((phy->addr << 21) | (devad << 16) | reg | + EMAC_MDIO_COMM_COMMAND_ADDRESS | EMAC_MDIO_COMM_START_BUSY); + REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); + + for (i = 0; i < 50; i++) { + DELAY(10); + + tmp = REG_RD(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM); + if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { + DELAY(5); + break; + } + } + if (tmp & EMAC_MDIO_COMM_START_BUSY) { + PMD_DRV_LOG(DEBUG, "write phy register failed"); + elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout" + + rc = ELINK_STATUS_TIMEOUT; + } else { + /* Data */ + tmp = ((phy->addr << 21) | (devad << 16) | val | + EMAC_MDIO_COMM_COMMAND_WRITE_45 | + EMAC_MDIO_COMM_START_BUSY); + REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_COMM, tmp); + + for (i = 0; i < 50; i++) { + DELAY(10); + + tmp = REG_RD(sc, phy->mdio_ctrl + + EMAC_REG_EMAC_MDIO_COMM); + if (!(tmp & EMAC_MDIO_COMM_START_BUSY)) { + DELAY(5); + break; + } + } + if (tmp & EMAC_MDIO_COMM_START_BUSY) { + PMD_DRV_LOG(DEBUG, "write phy register failed"); + elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout" + + rc = ELINK_STATUS_TIMEOUT; + } + } + /* Work around for E3 A0 */ + if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA) { + phy->flags ^= ELINK_FLAGS_DUMMY_READ; + if (phy->flags & ELINK_FLAGS_DUMMY_READ) { + uint16_t temp_val; + elink_cl45_read(sc, phy, devad, 0xf, &temp_val); + } + } + if (phy->flags & ELINK_FLAGS_MDC_MDIO_WA_B0) + elink_bits_dis(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); + return rc; +} + +/******************************************************************/ +/* EEE section */ +/******************************************************************/ +static uint8_t elink_eee_has_cap(struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + + if (REG_RD(sc, params->shmem2_base) <= + offsetof(struct shmem2_region, eee_status[params->port])) + return 0; + + return 1; +} + +static elink_status_t elink_eee_nvram_to_time(uint32_t nvram_mode, + uint32_t * idle_timer) +{ + switch (nvram_mode) { + case PORT_FEAT_CFG_EEE_POWER_MODE_BALANCED: + *idle_timer = ELINK_EEE_MODE_NVRAM_BALANCED_TIME; + break; + case PORT_FEAT_CFG_EEE_POWER_MODE_AGGRESSIVE: + *idle_timer = ELINK_EEE_MODE_NVRAM_AGGRESSIVE_TIME; + break; + case PORT_FEAT_CFG_EEE_POWER_MODE_LOW_LATENCY: + *idle_timer = ELINK_EEE_MODE_NVRAM_LATENCY_TIME; + break; + default: + *idle_timer = 0; + break; + } + + return ELINK_STATUS_OK; +} + +static elink_status_t elink_eee_time_to_nvram(uint32_t idle_timer, + uint32_t * nvram_mode) +{ + switch (idle_timer) { + case ELINK_EEE_MODE_NVRAM_BALANCED_TIME: + *nvram_mode = PORT_FEAT_CFG_EEE_POWER_MODE_BALANCED; + break; + case ELINK_EEE_MODE_NVRAM_AGGRESSIVE_TIME: + *nvram_mode = PORT_FEAT_CFG_EEE_POWER_MODE_AGGRESSIVE; + break; + case ELINK_EEE_MODE_NVRAM_LATENCY_TIME: + *nvram_mode = PORT_FEAT_CFG_EEE_POWER_MODE_LOW_LATENCY; + break; + default: + *nvram_mode = PORT_FEAT_CFG_EEE_POWER_MODE_DISABLED; + break; + } + + return ELINK_STATUS_OK; +} + +static uint32_t elink_eee_calc_timer(struct elink_params *params) +{ + uint32_t eee_mode, eee_idle; + struct bnx2x_softc *sc = params->sc; + + if (params->eee_mode & ELINK_EEE_MODE_OVERRIDE_NVRAM) { + if (params->eee_mode & ELINK_EEE_MODE_OUTPUT_TIME) { + /* time value in eee_mode --> used directly */ + eee_idle = params->eee_mode & ELINK_EEE_MODE_TIMER_MASK; + } else { + /* hsi value in eee_mode --> time */ + if (elink_eee_nvram_to_time(params->eee_mode & + ELINK_EEE_MODE_NVRAM_MASK, + &eee_idle)) + return 0; + } + } else { + /* hsi values in nvram --> time */ + eee_mode = ((REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_feature_config + [params-> + port].eee_power_mode)) & + PORT_FEAT_CFG_EEE_POWER_MODE_MASK) >> + PORT_FEAT_CFG_EEE_POWER_MODE_SHIFT); + + if (elink_eee_nvram_to_time(eee_mode, &eee_idle)) + return 0; + } + + return eee_idle; +} + +static elink_status_t elink_eee_set_timers(struct elink_params *params, + struct elink_vars *vars) +{ + uint32_t eee_idle = 0, eee_mode; + struct bnx2x_softc *sc = params->sc; + + eee_idle = elink_eee_calc_timer(params); + + if (eee_idle) { + REG_WR(sc, MISC_REG_CPMU_LP_IDLE_THR_P0 + (params->port << 2), + eee_idle); + } else if ((params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI) && + (params->eee_mode & ELINK_EEE_MODE_OVERRIDE_NVRAM) && + (params->eee_mode & ELINK_EEE_MODE_OUTPUT_TIME)) { + PMD_DRV_LOG(DEBUG, "Error: Tx LPI is enabled with timer 0"); + return ELINK_STATUS_ERROR; + } + + vars->eee_status &= ~(SHMEM_EEE_TIMER_MASK | SHMEM_EEE_TIME_OUTPUT_BIT); + if (params->eee_mode & ELINK_EEE_MODE_OUTPUT_TIME) { + /* eee_idle in 1u --> eee_status in 16u */ + eee_idle >>= 4; + vars->eee_status |= (eee_idle & SHMEM_EEE_TIMER_MASK) | + SHMEM_EEE_TIME_OUTPUT_BIT; + } else { + if (elink_eee_time_to_nvram(eee_idle, &eee_mode)) + return ELINK_STATUS_ERROR; + vars->eee_status |= eee_mode; + } + + return ELINK_STATUS_OK; +} + +static elink_status_t elink_eee_initial_config(struct elink_params *params, + struct elink_vars *vars, + uint8_t mode) +{ + vars->eee_status |= ((uint32_t) mode) << SHMEM_EEE_SUPPORTED_SHIFT; + + /* Propogate params' bits --> vars (for migration exposure) */ + if (params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI) + vars->eee_status |= SHMEM_EEE_LPI_REQUESTED_BIT; + else + vars->eee_status &= ~SHMEM_EEE_LPI_REQUESTED_BIT; + + if (params->eee_mode & ELINK_EEE_MODE_ADV_LPI) + vars->eee_status |= SHMEM_EEE_REQUESTED_BIT; + else + vars->eee_status &= ~SHMEM_EEE_REQUESTED_BIT; + + return elink_eee_set_timers(params, vars); +} + +static elink_status_t elink_eee_disable(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + + /* Make Certain LPI is disabled */ + REG_WR(sc, MISC_REG_CPMU_LP_FW_ENABLE_P0 + (params->port << 2), 0); + + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_EEE_ADV, 0x0); + + vars->eee_status &= ~SHMEM_EEE_ADV_STATUS_MASK; + + return ELINK_STATUS_OK; +} + +static elink_status_t elink_eee_advertise(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars, + uint8_t modes) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val = 0; + + /* Mask events preventing LPI generation */ + REG_WR(sc, MISC_REG_CPMU_LP_MASK_EXT_P0 + (params->port << 2), 0xfc20); + + if (modes & SHMEM_EEE_10G_ADV) { + PMD_DRV_LOG(DEBUG, "Advertise 10GBase-T EEE"); + val |= 0x8; + } + if (modes & SHMEM_EEE_1G_ADV) { + PMD_DRV_LOG(DEBUG, "Advertise 1GBase-T EEE"); + val |= 0x4; + } + + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_EEE_ADV, val); + + vars->eee_status &= ~SHMEM_EEE_ADV_STATUS_MASK; + vars->eee_status |= (modes << SHMEM_EEE_ADV_STATUS_SHIFT); + + return ELINK_STATUS_OK; +} + +static void elink_update_mng_eee(struct elink_params *params, + uint32_t eee_status) +{ + struct bnx2x_softc *sc = params->sc; + + if (elink_eee_has_cap(params)) + REG_WR(sc, params->shmem2_base + + offsetof(struct shmem2_region, + eee_status[params->port]), eee_status); +} + +static void elink_eee_an_resolve(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t adv = 0, lp = 0; + uint32_t lp_adv = 0; + uint8_t neg = 0; + + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_EEE_ADV, &adv); + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LP_EEE_ADV, &lp); + + if (lp & 0x2) { + lp_adv |= SHMEM_EEE_100M_ADV; + if (adv & 0x2) { + if (vars->line_speed == ELINK_SPEED_100) + neg = 1; + PMD_DRV_LOG(DEBUG, "EEE negotiated - 100M"); + } + } + if (lp & 0x14) { + lp_adv |= SHMEM_EEE_1G_ADV; + if (adv & 0x14) { + if (vars->line_speed == ELINK_SPEED_1000) + neg = 1; + PMD_DRV_LOG(DEBUG, "EEE negotiated - 1G"); + } + } + if (lp & 0x68) { + lp_adv |= SHMEM_EEE_10G_ADV; + if (adv & 0x68) { + if (vars->line_speed == ELINK_SPEED_10000) + neg = 1; + PMD_DRV_LOG(DEBUG, "EEE negotiated - 10G"); + } + } + + vars->eee_status &= ~SHMEM_EEE_LP_ADV_STATUS_MASK; + vars->eee_status |= (lp_adv << SHMEM_EEE_LP_ADV_STATUS_SHIFT); + + if (neg) { + PMD_DRV_LOG(DEBUG, "EEE is active"); + vars->eee_status |= SHMEM_EEE_ACTIVE_BIT; + } +} + +/******************************************************************/ +/* BSC access functions from E3 */ +/******************************************************************/ +static void elink_bsc_module_sel(struct elink_params *params) +{ + int idx; + uint32_t board_cfg, sfp_ctrl; + uint32_t i2c_pins[I2C_SWITCH_WIDTH], i2c_val[I2C_SWITCH_WIDTH]; + struct bnx2x_softc *sc = params->sc; + uint8_t port = params->port; + /* Read I2C output PINs */ + board_cfg = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.shared_hw_config.board)); + i2c_pins[I2C_BSC0] = board_cfg & SHARED_HW_CFG_E3_I2C_MUX0_MASK; + i2c_pins[I2C_BSC1] = (board_cfg & SHARED_HW_CFG_E3_I2C_MUX1_MASK) >> + SHARED_HW_CFG_E3_I2C_MUX1_SHIFT; + + /* Read I2C output value */ + sfp_ctrl = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port]. + e3_cmn_pin_cfg)); + i2c_val[I2C_BSC0] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX0_MASK) > 0; + i2c_val[I2C_BSC1] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX1_MASK) > 0; + PMD_DRV_LOG(DEBUG, "Setting BSC switch"); + for (idx = 0; idx < I2C_SWITCH_WIDTH; idx++) + elink_set_cfg_pin(sc, i2c_pins[idx], i2c_val[idx]); +} + +static elink_status_t elink_bsc_read(struct elink_params *params, + struct bnx2x_softc *sc, + uint8_t sl_devid, + uint16_t sl_addr, + uint8_t lc_addr, + uint8_t xfer_cnt, uint32_t * data_array) +{ + uint32_t val, i; + elink_status_t rc = ELINK_STATUS_OK; + + if (xfer_cnt > 16) { + PMD_DRV_LOG(DEBUG, "invalid xfer_cnt %d. Max is 16 bytes", + xfer_cnt); + return ELINK_STATUS_ERROR; + } + if (params) + elink_bsc_module_sel(params); + + xfer_cnt = 16 - lc_addr; + + /* Enable the engine */ + val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND); + val |= MCPR_IMC_COMMAND_ENABLE; + REG_WR(sc, MCP_REG_MCPR_IMC_COMMAND, val); + + /* Program slave device ID */ + val = (sl_devid << 16) | sl_addr; + REG_WR(sc, MCP_REG_MCPR_IMC_SLAVE_CONTROL, val); + + /* Start xfer with 0 byte to update the address pointer ??? */ + val = (MCPR_IMC_COMMAND_ENABLE) | + (MCPR_IMC_COMMAND_WRITE_OP << + MCPR_IMC_COMMAND_OPERATION_BITSHIFT) | + (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) | (0); + REG_WR(sc, MCP_REG_MCPR_IMC_COMMAND, val); + + /* Poll for completion */ + i = 0; + val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND); + while (((val >> MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT) & 0x3) != 1) { + DELAY(10); + val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND); + if (i++ > 1000) { + PMD_DRV_LOG(DEBUG, "wr 0 byte timed out after %d try", + i); + rc = ELINK_STATUS_TIMEOUT; + break; + } + } + if (rc == ELINK_STATUS_TIMEOUT) + return rc; + + /* Start xfer with read op */ + val = (MCPR_IMC_COMMAND_ENABLE) | + (MCPR_IMC_COMMAND_READ_OP << + MCPR_IMC_COMMAND_OPERATION_BITSHIFT) | + (lc_addr << MCPR_IMC_COMMAND_TRANSFER_ADDRESS_BITSHIFT) | + (xfer_cnt); + REG_WR(sc, MCP_REG_MCPR_IMC_COMMAND, val); + + /* Poll for completion */ + i = 0; + val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND); + while (((val >> MCPR_IMC_COMMAND_IMC_STATUS_BITSHIFT) & 0x3) != 1) { + DELAY(10); + val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND); + if (i++ > 1000) { + PMD_DRV_LOG(DEBUG, "rd op timed out after %d try", i); + rc = ELINK_STATUS_TIMEOUT; + break; + } + } + if (rc == ELINK_STATUS_TIMEOUT) + return rc; + + for (i = (lc_addr >> 2); i < 4; i++) { + data_array[i] = REG_RD(sc, (MCP_REG_MCPR_IMC_DATAREG0 + i * 4)); +#ifdef __BIG_ENDIAN + data_array[i] = ((data_array[i] & 0x000000ff) << 24) | + ((data_array[i] & 0x0000ff00) << 8) | + ((data_array[i] & 0x00ff0000) >> 8) | + ((data_array[i] & 0xff000000) >> 24); +#endif + } + return rc; +} + +static void elink_cl45_read_or_write(struct bnx2x_softc *sc, + struct elink_phy *phy, uint8_t devad, + uint16_t reg, uint16_t or_val) +{ + uint16_t val; + elink_cl45_read(sc, phy, devad, reg, &val); + elink_cl45_write(sc, phy, devad, reg, val | or_val); +} + +static void elink_cl45_read_and_write(struct bnx2x_softc *sc, + struct elink_phy *phy, + uint8_t devad, uint16_t reg, + uint16_t and_val) +{ + uint16_t val; + elink_cl45_read(sc, phy, devad, reg, &val); + elink_cl45_write(sc, phy, devad, reg, val & and_val); +} + +static uint8_t elink_get_warpcore_lane(struct elink_params *params) +{ + uint8_t lane = 0; + struct bnx2x_softc *sc = params->sc; + uint32_t path_swap, path_swap_ovr; + uint8_t path, port; + + path = SC_PATH(sc); + port = params->port; + + if (elink_is_4_port_mode(sc)) { + uint32_t port_swap, port_swap_ovr; + + /* Figure out path swap value */ + path_swap_ovr = REG_RD(sc, MISC_REG_FOUR_PORT_PATH_SWAP_OVWR); + if (path_swap_ovr & 0x1) + path_swap = (path_swap_ovr & 0x2); + else + path_swap = REG_RD(sc, MISC_REG_FOUR_PORT_PATH_SWAP); + + if (path_swap) + path = path ^ 1; + + /* Figure out port swap value */ + port_swap_ovr = REG_RD(sc, MISC_REG_FOUR_PORT_PORT_SWAP_OVWR); + if (port_swap_ovr & 0x1) + port_swap = (port_swap_ovr & 0x2); + else + port_swap = REG_RD(sc, MISC_REG_FOUR_PORT_PORT_SWAP); + + if (port_swap) + port = port ^ 1; + + lane = (port << 1) + path; + } else { /* Two port mode - no port swap */ + + /* Figure out path swap value */ + path_swap_ovr = REG_RD(sc, MISC_REG_TWO_PORT_PATH_SWAP_OVWR); + if (path_swap_ovr & 0x1) { + path_swap = (path_swap_ovr & 0x2); + } else { + path_swap = REG_RD(sc, MISC_REG_TWO_PORT_PATH_SWAP); + } + if (path_swap) + path = path ^ 1; + + lane = path << 1; + } + return lane; +} + +static void elink_set_aer_mmd(struct elink_params *params, + struct elink_phy *phy) +{ + uint32_t ser_lane; + uint16_t offset, aer_val; + struct bnx2x_softc *sc = params->sc; + ser_lane = ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); + + offset = (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) ? + (phy->addr + ser_lane) : 0; + + if (USES_WARPCORE(sc)) { + aer_val = elink_get_warpcore_lane(params); + /* In Dual-lane mode, two lanes are joined together, + * so in order to configure them, the AER broadcast method is + * used here. + * 0x200 is the broadcast address for lanes 0,1 + * 0x201 is the broadcast address for lanes 2,3 + */ + if (phy->flags & ELINK_FLAGS_WC_DUAL_MODE) + aer_val = (aer_val >> 1) | 0x200; + } else if (CHIP_IS_E2(sc)) + aer_val = 0x3800 + offset - 1; + else + aer_val = 0x3800 + offset; + + CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, aer_val); + +} + +/******************************************************************/ +/* Internal phy section */ +/******************************************************************/ + +static void elink_set_serdes_access(struct bnx2x_softc *sc, uint8_t port) +{ + uint32_t emac_base = (port) ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + + /* Set Clause 22 */ + REG_WR(sc, NIG_REG_SERDES0_CTRL_MD_ST + port * 0x10, 1); + REG_WR(sc, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245f8000); + DELAY(500); + REG_WR(sc, emac_base + EMAC_REG_EMAC_MDIO_COMM, 0x245d000f); + DELAY(500); + /* Set Clause 45 */ + REG_WR(sc, NIG_REG_SERDES0_CTRL_MD_ST + port * 0x10, 0); +} + +static void elink_serdes_deassert(struct bnx2x_softc *sc, uint8_t port) +{ + uint32_t val; + + PMD_DRV_LOG(DEBUG, "elink_serdes_deassert"); + + val = ELINK_SERDES_RESET_BITS << (port * 16); + + /* Reset and unreset the SerDes/XGXS */ + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); + DELAY(500); + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); + + elink_set_serdes_access(sc, port); + + REG_WR(sc, NIG_REG_SERDES0_CTRL_MD_DEVAD + port * 0x10, + ELINK_DEFAULT_PHY_DEV_ADDR); +} + +static void elink_xgxs_specific_func(struct elink_phy *phy, + struct elink_params *params, + uint32_t action) +{ + struct bnx2x_softc *sc = params->sc; + switch (action) { + case ELINK_PHY_INIT: + /* Set correct devad */ + REG_WR(sc, NIG_REG_XGXS0_CTRL_MD_ST + params->port * 0x18, 0); + REG_WR(sc, NIG_REG_XGXS0_CTRL_MD_DEVAD + params->port * 0x18, + phy->def_md_devad); + break; + } +} + +static void elink_xgxs_deassert(struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t port; + uint32_t val; + PMD_DRV_LOG(DEBUG, "elink_xgxs_deassert"); + port = params->port; + + val = ELINK_XGXS_RESET_BITS << (port * 16); + + /* Reset and unreset the SerDes/XGXS */ + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, val); + DELAY(500); + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_SET, val); + elink_xgxs_specific_func(¶ms->phy[ELINK_INT_PHY], params, + ELINK_PHY_INIT); +} + +static void elink_calc_ieee_aneg_adv(struct elink_phy *phy, + struct elink_params *params, + uint16_t * ieee_fc) +{ + *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX; + /* Resolve pause mode and advertisement Please refer to Table + * 28B-3 of the 802.3ab-1999 spec + */ + + switch (phy->req_flow_ctrl) { + case ELINK_FLOW_CTRL_AUTO: + switch (params->req_fc_auto_adv) { + case ELINK_FLOW_CTRL_BOTH: + *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + break; + case ELINK_FLOW_CTRL_RX: + case ELINK_FLOW_CTRL_TX: + *ieee_fc |= + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + break; + default: + break; + } + break; + case ELINK_FLOW_CTRL_TX: + *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + break; + + case ELINK_FLOW_CTRL_RX: + case ELINK_FLOW_CTRL_BOTH: + *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + break; + + case ELINK_FLOW_CTRL_NONE: + default: + *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; + break; + } + PMD_DRV_LOG(DEBUG, "ieee_fc = 0x%x", *ieee_fc); +} + +static void set_phy_vars(struct elink_params *params, struct elink_vars *vars) +{ + uint8_t actual_phy_idx, phy_index, link_cfg_idx; + uint8_t phy_config_swapped = params->multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED; + for (phy_index = ELINK_INT_PHY; phy_index < params->num_phys; + phy_index++) { + link_cfg_idx = ELINK_LINK_CONFIG_IDX(phy_index); + actual_phy_idx = phy_index; + if (phy_config_swapped) { + if (phy_index == ELINK_EXT_PHY1) + actual_phy_idx = ELINK_EXT_PHY2; + else if (phy_index == ELINK_EXT_PHY2) + actual_phy_idx = ELINK_EXT_PHY1; + } + params->phy[actual_phy_idx].req_flow_ctrl = + params->req_flow_ctrl[link_cfg_idx]; + + params->phy[actual_phy_idx].req_line_speed = + params->req_line_speed[link_cfg_idx]; + + params->phy[actual_phy_idx].speed_cap_mask = + params->speed_cap_mask[link_cfg_idx]; + + params->phy[actual_phy_idx].req_duplex = + params->req_duplex[link_cfg_idx]; + + if (params->req_line_speed[link_cfg_idx] == + ELINK_SPEED_AUTO_NEG) + vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED; + + PMD_DRV_LOG(DEBUG, "req_flow_ctrl %x, req_line_speed %x," + " speed_cap_mask %x", + params->phy[actual_phy_idx].req_flow_ctrl, + params->phy[actual_phy_idx].req_line_speed, + params->phy[actual_phy_idx].speed_cap_mask); + } +} + +static void elink_ext_phy_set_pause(struct elink_params *params, + struct elink_phy *phy, + struct elink_vars *vars) +{ + uint16_t val; + struct bnx2x_softc *sc = params->sc; + /* Read modify write pause advertizing */ + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, &val); + + val &= ~MDIO_AN_REG_ADV_PAUSE_BOTH; + + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + elink_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { + val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC; + } + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { + val |= MDIO_AN_REG_ADV_PAUSE_PAUSE; + } + PMD_DRV_LOG(DEBUG, "Ext phy AN advertize 0x%x", val); + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val); +} + +static void elink_pause_resolve(struct elink_vars *vars, uint32_t pause_result) +{ /* LD LP */ + switch (pause_result) { /* ASYM P ASYM P */ + case 0xb: /* 1 0 1 1 */ + vars->flow_ctrl = ELINK_FLOW_CTRL_TX; + break; + + case 0xe: /* 1 1 1 0 */ + vars->flow_ctrl = ELINK_FLOW_CTRL_RX; + break; + + case 0x5: /* 0 1 0 1 */ + case 0x7: /* 0 1 1 1 */ + case 0xd: /* 1 1 0 1 */ + case 0xf: /* 1 1 1 1 */ + vars->flow_ctrl = ELINK_FLOW_CTRL_BOTH; + break; + + default: + break; + } + if (pause_result & (1 << 0)) + vars->link_status |= LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE; + if (pause_result & (1 << 1)) + vars->link_status |= LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE; + +} + +static void elink_ext_phy_update_adv_fc(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + uint16_t ld_pause; /* local */ + uint16_t lp_pause; /* link partner */ + uint16_t pause_result; + struct bnx2x_softc *sc = params->sc; + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE) { + elink_cl22_read(sc, phy, 0x4, &ld_pause); + elink_cl22_read(sc, phy, 0x5, &lp_pause); + } else if (CHIP_IS_E3(sc) && ELINK_SINGLE_MEDIA_DIRECT(params)) { + uint8_t lane = elink_get_warpcore_lane(params); + uint16_t gp_status, gp_mask; + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_4, + &gp_status); + gp_mask = (MDIO_WC_REG_GP2_STATUS_GP_2_4_CL73_AN_CMPL | + MDIO_WC_REG_GP2_STATUS_GP_2_4_CL37_LP_AN_CAP) << + lane; + if ((gp_status & gp_mask) == gp_mask) { + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_ADV_PAUSE, &ld_pause); + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG, &lp_pause); + } else { + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LD, &ld_pause); + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LP, &lp_pause); + ld_pause = ((ld_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) + << 3); + lp_pause = ((lp_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) + << 3); + } + } else { + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_ADV_PAUSE, &ld_pause); + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG, &lp_pause); + } + pause_result = (ld_pause & MDIO_AN_REG_ADV_PAUSE_MASK) >> 8; + pause_result |= (lp_pause & MDIO_AN_REG_ADV_PAUSE_MASK) >> 10; + PMD_DRV_LOG(DEBUG, "Ext PHY pause result 0x%x", pause_result); + elink_pause_resolve(vars, pause_result); + +} + +static uint8_t elink_ext_phy_resolve_fc(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + uint8_t ret = 0; + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + if (phy->req_flow_ctrl != ELINK_FLOW_CTRL_AUTO) { + /* Update the advertised flow-controled of LD/LP in AN */ + if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG) + elink_ext_phy_update_adv_fc(phy, params, vars); + /* But set the flow-control result as the requested one */ + vars->flow_ctrl = phy->req_flow_ctrl; + } else if (phy->req_line_speed != ELINK_SPEED_AUTO_NEG) + vars->flow_ctrl = params->req_fc_auto_adv; + else if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) { + ret = 1; + elink_ext_phy_update_adv_fc(phy, params, vars); + } + return ret; +} + +/******************************************************************/ +/* Warpcore section */ +/******************************************************************/ +/* The init_internal_warpcore should mirror the xgxs, + * i.e. reset the lane (if needed), set aer for the + * init configuration, and set/clear SGMII flag. Internal + * phy init is done purely in phy_init stage. + */ +#define WC_TX_DRIVER(post2, idriver, ipre) \ + ((post2 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | \ + (idriver << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | \ + (ipre << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)) + +#define WC_TX_FIR(post, main, pre) \ + ((post << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | \ + (main << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | \ + (pre << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET)) + +static void elink_warpcore_enable_AN_KR2(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t i; + static struct elink_reg_set reg_set[] = { + /* Step 1 - Program the TX/RX alignment markers */ + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0xa157}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xcbe2}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0x7537}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0xa157}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xcbe2}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0x7537}, + /* Step 2 - Configure the NP registers */ + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000a}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6400}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0620}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0157}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x6464}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x3150}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x3150}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0157}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0620} + }; + PMD_DRV_LOG(DEBUG, "Enabling 20G-KR2"); + + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL49_USERB0_CTRL, (3 << 6)); + + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + + /* Start KR2 work-around timer which handles BNX2X8073 link-parner */ + vars->link_attr_sync |= LINK_ATTR_SYNC_KR2_ENABLE; + elink_update_link_attr(params, vars->link_attr_sync); +} + +static void elink_disable_kr2(struct elink_params *params, + struct elink_vars *vars, struct elink_phy *phy) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t i; + static struct elink_reg_set reg_set[] = { + /* Step 1 - Program the TX/RX alignment markers */ + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL5, 0x7690}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL7, 0xe647}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL6, 0xc4f0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_TX_CTRL9, 0x7690}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL11, 0xe647}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL82_USERB1_RX_CTRL10, 0xc4f0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_USERB0_CTRL, 0x000c}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL1, 0x6000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CTRL3, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL73_BAM_CODE_FIELD, 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI1, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI2, 0x0af7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_OUI3, 0x0af7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000} + }; + PMD_DRV_LOG(DEBUG, "Disabling 20G-KR2"); + + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + vars->link_attr_sync &= ~LINK_ATTR_SYNC_KR2_ENABLE; + elink_update_link_attr(params, vars->link_attr_sync); + + vars->check_kr2_recovery_cnt = ELINK_CHECK_KR2_RECOVERY_CNT; +} + +static void elink_warpcore_set_lpi_passthrough(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + + PMD_DRV_LOG(DEBUG, "Configure WC for LPI pass through"); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_EEE_COMBO_CONTROL0, 0x7c); + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC5, 0xc000); +} + +static void elink_warpcore_restart_AN_KR(struct elink_phy *phy, + struct elink_params *params) +{ + /* Restart autoneg on the leading lane only */ + struct bnx2x_softc *sc = params->sc; + uint16_t lane = elink_get_warpcore_lane(params); + CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, lane); + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1200); + + /* Restore AER */ + elink_set_aer_mmd(params, phy); +} + +static void elink_warpcore_enable_AN_KR(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + uint16_t lane, i, cl72_ctrl, an_adv = 0; + struct bnx2x_softc *sc = params->sc; + static struct elink_reg_set reg_set[] = { + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, + {MDIO_PMA_DEVAD, MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0x0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_RX66_CONTROL, 0x7415}, + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x6190}, + /* Disable Autoneg: re-enable it after adv is done. */ + {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0}, + {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0}, + }; + PMD_DRV_LOG(DEBUG, "Enable Auto Negotiation for KR"); + /* Set to default registers that may be overriden by 10G force */ + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &cl72_ctrl); + cl72_ctrl &= 0x08ff; + cl72_ctrl |= 0x3800; + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, cl72_ctrl); + + /* Check adding advertisement for 1G KX */ + if (((vars->line_speed == ELINK_SPEED_AUTO_NEG) && + (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (vars->line_speed == ELINK_SPEED_1000)) { + uint16_t addr = MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2; + an_adv |= (1 << 5); + + /* Enable CL37 1G Parallel Detect */ + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, addr, 0x1); + PMD_DRV_LOG(DEBUG, "Advertize 1G"); + } + if (((vars->line_speed == ELINK_SPEED_AUTO_NEG) && + (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || + (vars->line_speed == ELINK_SPEED_10000)) { + /* Check adding advertisement for 10G KR */ + an_adv |= (1 << 7); + /* Enable 10G Parallel Detect */ + CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_PAR_DET_10G_CTRL, 1); + elink_set_aer_mmd(params, phy); + PMD_DRV_LOG(DEBUG, "Advertize 10G"); + } + + /* Set Transmit PMD settings */ + lane = elink_get_warpcore_lane(params); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * lane, + WC_TX_DRIVER(0x02, 0x06, 0x09)); + /* Configure the next lane if dual mode */ + if (phy->flags & ELINK_FLAGS_WC_DUAL_MODE) + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * (lane + 1), + WC_TX_DRIVER(0x02, 0x06, 0x09)); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL, 0x03f0); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_2P5_DEF_CTRL, 0x03f0); + + /* Advertised speeds */ + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, an_adv); + + /* Advertised and set FEC (Forward Error Correction) */ + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2, + (MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY | + MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ)); + + /* Enable CL37 BAM */ + if (REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port]. + default_cfg)) & + PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) { + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL, + 1); + PMD_DRV_LOG(DEBUG, "Enable CL37 BAM on KR"); + } + + /* Advertise pause */ + elink_ext_phy_set_pause(params, phy, vars); + vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC7, 0x100); + + /* Over 1G - AN local device user page 1 */ + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL3_UP1, 0x1f); + + if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) && + (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) || + (phy->req_line_speed == ELINK_SPEED_20000)) { + + CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, lane); + + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX1_PCI_CTRL + + (0x10 * lane), (1 << 11)); + + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXS_X2_CONTROL3, 0x7); + elink_set_aer_mmd(params, phy); + + elink_warpcore_enable_AN_KR2(phy, params, vars); + } else { + elink_disable_kr2(params, vars, phy); + } + + /* Enable Autoneg: only on the main lane */ + elink_warpcore_restart_AN_KR(phy, params); +} + +static void elink_warpcore_set_10G_KR(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val16, i, lane; + static struct elink_reg_set reg_set[] = { + /* Disable Autoneg */ + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, + {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, + 0x3f00}, + {MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, 0}, + {MDIO_AN_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL3_UP1, 0x1}, + {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, 0xa}, + /* Leave cl72 training enable, needed for KR */ + {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2} + }; + + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + + lane = elink_get_warpcore_lane(params); + /* Global registers */ + CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + /* Disable CL36 PCS Tx */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16); + val16 &= ~(0x0011 << lane); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16); + + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16); + val16 |= (0x0303 << (lane << 1)); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16); + /* Restore AER */ + elink_set_aer_mmd(params, phy); + /* Set speed via PMA/PMD register */ + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040); + + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, + MDIO_WC_REG_IEEE0BLK_AUTONEGNP, 0xB); + + /* Enable encoded forced speed */ + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC2, 0x30); + + /* Turn TX scramble payload only the 64/66 scrambler */ + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_TX66_CONTROL, 0x9); + + /* Turn RX scramble payload only the 64/66 scrambler */ + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, 0xF9); + + /* Set and clear loopback to cause a reset to 64/66 decoder */ + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x4000); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x0); + +} + +static void elink_warpcore_set_10G_XFI(struct elink_phy *phy, + struct elink_params *params, + uint8_t is_xfi) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t misc1_val, tap_val, tx_driver_val, lane, val; + uint32_t cfg_tap_val, tx_drv_brdct, tx_equal; + + /* Hold rxSeqStart */ + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, 0x8000); + + /* Hold tx_fifo_reset */ + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, 0x1); + + /* Disable CL73 AN */ + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0); + + /* Disable 100FX Enable and Auto-Detect */ + elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_FX100_CTRL1, 0xFFFA); + + /* Disable 100FX Idle detect */ + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_FX100_CTRL3, 0x0080); + + /* Set Block address to Remote PHY & Clear forced_speed[5] */ + elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, 0xFF7F); + + /* Turn off auto-detect & fiber mode */ + elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, + 0xFFEE); + + /* Set filter_force_link, disable_false_link and parallel_detect */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &val); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, + ((val | 0x0006) & 0xFFFE)); + + /* Set XFI / SFI */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, &misc1_val); + + misc1_val &= ~(0x1f); + + if (is_xfi) { + misc1_val |= 0x5; + tap_val = WC_TX_FIR(0x08, 0x37, 0x00); + tx_driver_val = WC_TX_DRIVER(0x00, 0x02, 0x03); + } else { + cfg_tap_val = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params-> + port].sfi_tap_values)); + + tx_equal = cfg_tap_val & PORT_HW_CFG_TX_EQUALIZATION_MASK; + + tx_drv_brdct = (cfg_tap_val & + PORT_HW_CFG_TX_DRV_BROADCAST_MASK) >> + PORT_HW_CFG_TX_DRV_BROADCAST_SHIFT; + + misc1_val |= 0x9; + + /* TAP values are controlled by nvram, if value there isn't 0 */ + if (tx_equal) + tap_val = (uint16_t) tx_equal; + else + tap_val = WC_TX_FIR(0x0f, 0x2b, 0x02); + + if (tx_drv_brdct) + tx_driver_val = + WC_TX_DRIVER(0x03, (uint16_t) tx_drv_brdct, 0x06); + else + tx_driver_val = WC_TX_DRIVER(0x03, 0x02, 0x06); + } + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, misc1_val); + + /* Set Transmit PMD settings */ + lane = elink_get_warpcore_lane(params); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX_FIR_TAP, + tap_val | MDIO_WC_REG_TX_FIR_TAP_ENABLE); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * lane, + tx_driver_val); + + /* Enable fiber mode, enable and invert sig_det */ + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0xd); + + /* Set Block address to Remote PHY & Set forced_speed[5], 40bit mode */ + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, 0x8080); + + elink_warpcore_set_lpi_passthrough(phy, params); + + /* 10G XFI Full Duplex */ + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x100); + + /* Release tx_fifo_reset */ + elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, + 0xFFFE); + /* Release rxSeqStart */ + elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, 0x7FFF); +} + +static void elink_warpcore_set_20G_force_KR2(struct elink_phy *phy, + struct elink_params *params) +{ + uint16_t val; + struct bnx2x_softc *sc = params->sc; + /* Set global registers, so set AER lane to 0 */ + CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + + /* Disable sequencer */ + elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, ~(1 << 13)); + + elink_set_aer_mmd(params, phy); + + elink_cl45_read_and_write(sc, phy, MDIO_PMA_DEVAD, + MDIO_WC_REG_PMD_KR_CONTROL, ~(1 << 1)); + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0); + /* Turn off CL73 */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL73_USERB0_CTRL, &val); + val &= ~(1 << 5); + val |= (1 << 6); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL73_USERB0_CTRL, val); + + /* Set 20G KR2 force speed */ + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x1f); + + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, (1 << 7)); + + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, &val); + val &= ~(3 << 14); + val |= (1 << 15); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_MISC1_CONTROL, val); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0x835A); + + /* Enable sequencer (over lane 0) */ + CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, (1 << 13)); + + elink_set_aer_mmd(params, phy); +} + +static void elink_warpcore_set_20G_DXGXS(struct bnx2x_softc *sc, + struct elink_phy *phy, uint16_t lane) +{ + /* Rx0 anaRxControl1G */ + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX0_ANARXCONTROL1G, 0x90); + + /* Rx2 anaRxControl1G */ + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX2_ANARXCONTROL1G, 0x90); + + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_SCW0, 0xE070); + + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_SCW1, 0xC0D0); + + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_SCW2, 0xA0B0); + + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_RX66_SCW3, 0x8090); + + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW0_MASK, 0xF0F0); + + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW1_MASK, 0xF0F0); + + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW2_MASK, 0xF0F0); + + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_SCW3_MASK, 0xF0F0); + + /* Serdes Digital Misc1 */ + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x6008); + + /* Serdes Digital4 Misc3 */ + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL4_MISC3, 0x8088); + + /* Set Transmit PMD settings */ + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX_FIR_TAP, + (WC_TX_FIR(0x12, 0x2d, 0x00) | + MDIO_WC_REG_TX_FIR_TAP_ENABLE)); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * lane, + WC_TX_DRIVER(0x02, 0x02, 0x02)); +} + +static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy, + struct elink_params *params, + uint8_t fiber_mode, + uint8_t always_autoneg) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val16, digctrl_kx1, digctrl_kx2; + + /* Clear XFI clock comp in non-10G single lane mode. */ + elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, ~(3 << 13)); + + elink_warpcore_set_lpi_passthrough(phy, params); + + if (always_autoneg || phy->req_line_speed == ELINK_SPEED_AUTO_NEG) { + /* SGMII Autoneg */ + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, + 0x1000); + PMD_DRV_LOG(DEBUG, "set SGMII AUTONEG"); + } else { + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); + val16 &= 0xcebf; + switch (phy->req_line_speed) { + case ELINK_SPEED_10: + break; + case ELINK_SPEED_100: + val16 |= 0x2000; + break; + case ELINK_SPEED_1000: + val16 |= 0x0040; + break; + default: + PMD_DRV_LOG(DEBUG, + "Speed not supported: 0x%x", + phy->req_line_speed); + return; + } + + if (phy->req_duplex == DUPLEX_FULL) + val16 |= 0x0100; + + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16); + + PMD_DRV_LOG(DEBUG, "set SGMII force speed %d", + phy->req_line_speed); + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); + PMD_DRV_LOG(DEBUG, " (readback) %x", val16); + } + + /* SGMII Slave mode and disable signal detect */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, &digctrl_kx1); + if (fiber_mode) + digctrl_kx1 = 1; + else + digctrl_kx1 &= 0xff4a; + + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, digctrl_kx1); + + /* Turn off parallel detect */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, &digctrl_kx2); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, + (digctrl_kx2 & ~(1 << 2))); + + /* Re-enable parallel detect */ + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, + (digctrl_kx2 | (1 << 2))); + + /* Enable autodet */ + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, + (digctrl_kx1 | 0x10)); +} + +static void elink_warpcore_reset_lane(struct bnx2x_softc *sc, + struct elink_phy *phy, uint8_t reset) +{ + uint16_t val; + /* Take lane out of reset after configuration is finished */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC6, &val); + if (reset) + val |= 0xC000; + else + val &= 0x3FFF; + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC6, val); + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC6, &val); +} + +/* Clear SFI/XFI link settings registers */ +static void elink_warpcore_clear_regs(struct elink_phy *phy, + struct elink_params *params, + uint16_t lane) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t i; + static struct elink_reg_set wc_regs[] = { + {MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0}, + {MDIO_WC_DEVAD, MDIO_WC_REG_FX100_CTRL1, 0x014a}, + {MDIO_WC_DEVAD, MDIO_WC_REG_FX100_CTRL3, 0x0800}, + {MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL4_MISC3, 0x8008}, + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, + 0x0195}, + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, + 0x0007}, + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X3, + 0x0002}, + {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_MISC1, 0x6000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_TX_FIR_TAP, 0x0000}, + {MDIO_WC_DEVAD, MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x2040}, + {MDIO_WC_DEVAD, MDIO_WC_REG_COMBO_IEEE0_MIICTRL, 0x0140} + }; + /* Set XFI clock comp as default. */ + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX66_CONTROL, (3 << 13)); + + for (i = 0; i < ARRAY_SIZE(wc_regs); i++) + elink_cl45_write(sc, phy, wc_regs[i].devad, wc_regs[i].reg, + wc_regs[i].val); + + lane = elink_get_warpcore_lane(params); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_TX0_TX_DRIVER + 0x10 * lane, 0x0990); + +} + +static elink_status_t elink_get_mod_abs_int_cfg(struct bnx2x_softc *sc, + uint32_t shmem_base, + uint8_t port, + uint8_t * gpio_num, + uint8_t * gpio_port) +{ + uint32_t cfg_pin; + *gpio_num = 0; + *gpio_port = 0; + if (CHIP_IS_E3(sc)) { + cfg_pin = (REG_RD(sc, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port]. + e3_sfp_ctrl)) & + PORT_HW_CFG_E3_MOD_ABS_MASK) >> + PORT_HW_CFG_E3_MOD_ABS_SHIFT; + + /* Should not happen. This function called upon interrupt + * triggered by GPIO ( since EPIO can only generate interrupts + * to MCP). + * So if this function was called and none of the GPIOs was set, + * it means the shit hit the fan. + */ + if ((cfg_pin < PIN_CFG_GPIO0_P0) || + (cfg_pin > PIN_CFG_GPIO3_P1)) { + PMD_DRV_LOG(DEBUG, + "No cfg pin %x for module detect indication", + cfg_pin); + return ELINK_STATUS_ERROR; + } + + *gpio_num = (cfg_pin - PIN_CFG_GPIO0_P0) & 0x3; + *gpio_port = (cfg_pin - PIN_CFG_GPIO0_P0) >> 2; + } else { + *gpio_num = MISC_REGISTERS_GPIO_3; + *gpio_port = port; + } + + return ELINK_STATUS_OK; +} + +static int elink_is_sfp_module_plugged(struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t gpio_num, gpio_port; + uint32_t gpio_val; + if (elink_get_mod_abs_int_cfg(sc, + params->shmem_base, params->port, + &gpio_num, &gpio_port) != ELINK_STATUS_OK) + return 0; + gpio_val = elink_cb_gpio_read(sc, gpio_num, gpio_port); + + /* Call the handling function in case module is detected */ + if (gpio_val == 0) + return 1; + else + return 0; +} + +static int elink_warpcore_get_sigdet(struct elink_phy *phy, + struct elink_params *params) +{ + uint16_t gp2_status_reg0, lane; + struct bnx2x_softc *sc = params->sc; + + lane = elink_get_warpcore_lane(params); + + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_0, + &gp2_status_reg0); + + return (gp2_status_reg0 >> (8 + lane)) & 0x1; +} + +static void elink_warpcore_config_runtime(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t serdes_net_if; + uint16_t gp_status1 = 0, lnkup = 0, lnkup_kr = 0; + + vars->turn_to_run_wc_rt = vars->turn_to_run_wc_rt ? 0 : 1; + + if (!vars->turn_to_run_wc_rt) + return; + + if (vars->rx_tx_asic_rst) { + uint16_t lane = elink_get_warpcore_lane(params); + serdes_net_if = (REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config + [params->port]. + default_cfg)) & + PORT_HW_CFG_NET_SERDES_IF_MASK); + + switch (serdes_net_if) { + case PORT_HW_CFG_NET_SERDES_IF_KR: + /* Do we get link yet? */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 0x81d1, + &gp_status1); + lnkup = (gp_status1 >> (8 + lane)) & 0x1; /* 1G */ + /*10G KR */ + lnkup_kr = (gp_status1 >> (12 + lane)) & 0x1; + + if (lnkup_kr || lnkup) { + vars->rx_tx_asic_rst = 0; + } else { + /* Reset the lane to see if link comes up. */ + elink_warpcore_reset_lane(sc, phy, 1); + elink_warpcore_reset_lane(sc, phy, 0); + + /* Restart Autoneg */ + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, + 0x1200); + + vars->rx_tx_asic_rst--; + PMD_DRV_LOG(DEBUG, "0x%x retry left", + vars->rx_tx_asic_rst); + } + break; + + default: + break; + } + + } + /*params->rx_tx_asic_rst */ +} + +static void elink_warpcore_config_sfi(struct elink_phy *phy, + struct elink_params *params) +{ + uint16_t lane = elink_get_warpcore_lane(params); + + elink_warpcore_clear_regs(phy, params, lane); + if ((params->req_line_speed[ELINK_LINK_CONFIG_IDX(ELINK_INT_PHY)] == + ELINK_SPEED_10000) && + (phy->media_type != ELINK_ETH_PHY_SFP_1G_FIBER)) { + PMD_DRV_LOG(DEBUG, "Setting 10G SFI"); + elink_warpcore_set_10G_XFI(phy, params, 0); + } else { + PMD_DRV_LOG(DEBUG, "Setting 1G Fiber"); + elink_warpcore_set_sgmii_speed(phy, params, 1, 0); + } +} + +static void elink_sfp_e3_set_transmitter(struct elink_params *params, + struct elink_phy *phy, uint8_t tx_en) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t cfg_pin; + uint8_t port = params->port; + + cfg_pin = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_TX_LASER_MASK; + /* Set the !tx_en since this pin is DISABLE_TX_LASER */ + PMD_DRV_LOG(DEBUG, "Setting WC TX to %d", tx_en); + + /* For 20G, the expected pin to be used is 3 pins after the current */ + elink_set_cfg_pin(sc, cfg_pin, tx_en ^ 1); + if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G) + elink_set_cfg_pin(sc, cfg_pin + 3, tx_en ^ 1); +} + +static void elink_warpcore_config_init(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t serdes_net_if; + uint8_t fiber_mode; + uint16_t lane = elink_get_warpcore_lane(params); + serdes_net_if = (REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port]. + default_cfg)) & + PORT_HW_CFG_NET_SERDES_IF_MASK); + PMD_DRV_LOG(DEBUG, + "Begin Warpcore init, link_speed %d, " + "serdes_net_if = 0x%x", vars->line_speed, serdes_net_if); + elink_set_aer_mmd(params, phy); + elink_warpcore_reset_lane(sc, phy, 1); + vars->phy_flags |= PHY_XGXS_FLAG; + if ((serdes_net_if == PORT_HW_CFG_NET_SERDES_IF_SGMII) || + (phy->req_line_speed && + ((phy->req_line_speed == ELINK_SPEED_100) || + (phy->req_line_speed == ELINK_SPEED_10)))) { + vars->phy_flags |= PHY_SGMII_FLAG; + PMD_DRV_LOG(DEBUG, "Setting SGMII mode"); + elink_warpcore_clear_regs(phy, params, lane); + elink_warpcore_set_sgmii_speed(phy, params, 0, 1); + } else { + switch (serdes_net_if) { + case PORT_HW_CFG_NET_SERDES_IF_KR: + /* Enable KR Auto Neg */ + if (params->loopback_mode != ELINK_LOOPBACK_EXT) + elink_warpcore_enable_AN_KR(phy, params, vars); + else { + PMD_DRV_LOG(DEBUG, "Setting KR 10G-Force"); + elink_warpcore_set_10G_KR(phy, params); + } + break; + + case PORT_HW_CFG_NET_SERDES_IF_XFI: + elink_warpcore_clear_regs(phy, params, lane); + if (vars->line_speed == ELINK_SPEED_10000) { + PMD_DRV_LOG(DEBUG, "Setting 10G XFI"); + elink_warpcore_set_10G_XFI(phy, params, 1); + } else { + if (ELINK_SINGLE_MEDIA_DIRECT(params)) { + PMD_DRV_LOG(DEBUG, "1G Fiber"); + fiber_mode = 1; + } else { + PMD_DRV_LOG(DEBUG, "10/100/1G SGMII"); + fiber_mode = 0; + } + elink_warpcore_set_sgmii_speed(phy, + params, + fiber_mode, 0); + } + + break; + + case PORT_HW_CFG_NET_SERDES_IF_SFI: + /* Issue Module detection if module is plugged, or + * enabled transmitter to avoid current leakage in case + * no module is connected + */ + if ((params->loopback_mode == ELINK_LOOPBACK_NONE) || + (params->loopback_mode == ELINK_LOOPBACK_EXT)) { + if (elink_is_sfp_module_plugged(params)) + elink_sfp_module_detection(phy, params); + else + elink_sfp_e3_set_transmitter(params, + phy, 1); + } + + elink_warpcore_config_sfi(phy, params); + break; + + case PORT_HW_CFG_NET_SERDES_IF_DXGXS: + if (vars->line_speed != ELINK_SPEED_20000) { + PMD_DRV_LOG(DEBUG, "Speed not supported yet"); + return; + } + PMD_DRV_LOG(DEBUG, "Setting 20G DXGXS"); + elink_warpcore_set_20G_DXGXS(sc, phy, lane); + /* Issue Module detection */ + + elink_sfp_module_detection(phy, params); + break; + case PORT_HW_CFG_NET_SERDES_IF_KR2: + if (!params->loopback_mode) { + elink_warpcore_enable_AN_KR(phy, params, vars); + } else { + PMD_DRV_LOG(DEBUG, "Setting KR 20G-Force"); + elink_warpcore_set_20G_force_KR2(phy, params); + } + break; + default: + PMD_DRV_LOG(DEBUG, + "Unsupported Serdes Net Interface 0x%x", + serdes_net_if); + return; + } + } + + /* Take lane out of reset after configuration is finished */ + elink_warpcore_reset_lane(sc, phy, 0); + PMD_DRV_LOG(DEBUG, "Exit config init"); +} + +static void elink_warpcore_link_reset(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val16, lane; + elink_sfp_e3_set_transmitter(params, phy, 0); + elink_set_mdio_emac_per_phy(sc, params); + elink_set_aer_mmd(params, phy); + /* Global register */ + elink_warpcore_reset_lane(sc, phy, 1); + + /* Clear loopback settings (if any) */ + /* 10G & 20G */ + elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, 0xBFFF); + + elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0xfffe); + + /* Update those 1-copy registers */ + CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + /* Enable 1G MDIO (1-copy) */ + elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, ~0x10); + + elink_cl45_read_and_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL2, 0xff00); + lane = elink_get_warpcore_lane(params); + /* Disable CL36 PCS Tx */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, &val16); + val16 |= (0x11 << lane); + if (phy->flags & ELINK_FLAGS_WC_DUAL_MODE) + val16 |= (0x22 << lane); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL0, val16); + + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, &val16); + val16 &= ~(0x0303 << (lane << 1)); + val16 |= (0x0101 << (lane << 1)); + if (phy->flags & ELINK_FLAGS_WC_DUAL_MODE) { + val16 &= ~(0x0c0c << (lane << 1)); + val16 |= (0x0404 << (lane << 1)); + } + + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL1, val16); + /* Restore AER */ + elink_set_aer_mmd(params, phy); + +} + +static void elink_set_warpcore_loopback(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val16; + uint32_t lane; + PMD_DRV_LOG(DEBUG, "Setting Warpcore loopback type %x, speed %d", + params->loopback_mode, phy->req_line_speed); + + if (phy->req_line_speed < ELINK_SPEED_10000 || + phy->supported & ELINK_SUPPORTED_20000baseKR2_Full) { + /* 10/100/1000/20G-KR2 */ + + /* Update those 1-copy registers */ + CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + /* Enable 1G MDIO (1-copy) */ + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK0_XGXSCONTROL, + 0x10); + /* Set 1G loopback based on lane (1-copy) */ + lane = elink_get_warpcore_lane(params); + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL2, &val16); + val16 |= (1 << lane); + if (phy->flags & ELINK_FLAGS_WC_DUAL_MODE) + val16 |= (2 << lane); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_XGXSBLK1_LANECTRL2, val16); + + /* Switch back to 4-copy registers */ + elink_set_aer_mmd(params, phy); + } else { + /* 10G / 20G-DXGXS */ + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_COMBO_IEEE0_MIICTRL, + 0x4000); + elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_IEEE0BLK_MIICNTL, 0x1); + } +} + +static void elink_sync_link(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t link_10g_plus; + if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG) + vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG; + vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP); + if (vars->link_up) { + PMD_DRV_LOG(DEBUG, "phy link up"); + + vars->phy_link_up = 1; + vars->duplex = DUPLEX_FULL; + switch (vars->link_status & LINK_STATUS_SPEED_AND_DUPLEX_MASK) { + case ELINK_LINK_10THD: + vars->duplex = DUPLEX_HALF; + /* Fall thru */ + case ELINK_LINK_10TFD: + vars->line_speed = ELINK_SPEED_10; + break; + + case ELINK_LINK_100TXHD: + vars->duplex = DUPLEX_HALF; + /* Fall thru */ + case ELINK_LINK_100T4: + case ELINK_LINK_100TXFD: + vars->line_speed = ELINK_SPEED_100; + break; + + case ELINK_LINK_1000THD: + vars->duplex = DUPLEX_HALF; + /* Fall thru */ + case ELINK_LINK_1000TFD: + vars->line_speed = ELINK_SPEED_1000; + break; + + case ELINK_LINK_2500THD: + vars->duplex = DUPLEX_HALF; + /* Fall thru */ + case ELINK_LINK_2500TFD: + vars->line_speed = ELINK_SPEED_2500; + break; + + case ELINK_LINK_10GTFD: + vars->line_speed = ELINK_SPEED_10000; + break; + case ELINK_LINK_20GTFD: + vars->line_speed = ELINK_SPEED_20000; + break; + default: + break; + } + vars->flow_ctrl = 0; + if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED) + vars->flow_ctrl |= ELINK_FLOW_CTRL_TX; + + if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED) + vars->flow_ctrl |= ELINK_FLOW_CTRL_RX; + + if (!vars->flow_ctrl) + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + + if (vars->line_speed && + ((vars->line_speed == ELINK_SPEED_10) || + (vars->line_speed == ELINK_SPEED_100))) { + vars->phy_flags |= PHY_SGMII_FLAG; + } else { + vars->phy_flags &= ~PHY_SGMII_FLAG; + } + if (vars->line_speed && + USES_WARPCORE(sc) && (vars->line_speed == ELINK_SPEED_1000)) + vars->phy_flags |= PHY_SGMII_FLAG; + /* Anything 10 and over uses the bmac */ + link_10g_plus = (vars->line_speed >= ELINK_SPEED_10000); + + if (link_10g_plus) { + if (USES_WARPCORE(sc)) + vars->mac_type = ELINK_MAC_TYPE_XMAC; + else + vars->mac_type = ELINK_MAC_TYPE_BMAC; + } else { + if (USES_WARPCORE(sc)) + vars->mac_type = ELINK_MAC_TYPE_UMAC; + else + vars->mac_type = ELINK_MAC_TYPE_EMAC; + } + } else { /* Link down */ + PMD_DRV_LOG(DEBUG, "phy link down"); + + vars->phy_link_up = 0; + + vars->line_speed = 0; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + + /* Indicate no mac active */ + vars->mac_type = ELINK_MAC_TYPE_NONE; + if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG) + vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; + if (vars->link_status & LINK_STATUS_SFP_TX_FAULT) + vars->phy_flags |= PHY_SFP_TX_FAULT_FLAG; + } +} + +void elink_link_status_update(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t port = params->port; + uint32_t sync_offset, media_types; + /* Update PHY configuration */ + set_phy_vars(params, vars); + + vars->link_status = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + port_mb[port].link_status)); + + /* Force link UP in non LOOPBACK_EXT loopback mode(s) */ + if (params->loopback_mode != ELINK_LOOPBACK_NONE && + params->loopback_mode != ELINK_LOOPBACK_EXT) + vars->link_status |= LINK_STATUS_LINK_UP; + + if (elink_eee_has_cap(params)) + vars->eee_status = REG_RD(sc, params->shmem2_base + + offsetof(struct shmem2_region, + eee_status[params->port])); + + vars->phy_flags = PHY_XGXS_FLAG; + elink_sync_link(params, vars); + /* Sync media type */ + sync_offset = params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].media_type); + media_types = REG_RD(sc, sync_offset); + + params->phy[ELINK_INT_PHY].media_type = + (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) >> + PORT_HW_CFG_MEDIA_TYPE_PHY0_SHIFT; + params->phy[ELINK_EXT_PHY1].media_type = + (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY1_MASK) >> + PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT; + params->phy[ELINK_EXT_PHY2].media_type = + (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY2_MASK) >> + PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT; + PMD_DRV_LOG(DEBUG, "media_types = 0x%x", media_types); + + /* Sync AEU offset */ + sync_offset = params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].aeu_int_mask); + + vars->aeu_int_mask = REG_RD(sc, sync_offset); + + /* Sync PFC status */ + if (vars->link_status & LINK_STATUS_PFC_ENABLED) + params->feature_config_flags |= + ELINK_FEATURE_CONFIG_PFC_ENABLED; + else + params->feature_config_flags &= + ~ELINK_FEATURE_CONFIG_PFC_ENABLED; + + if (SHMEM2_HAS(sc, link_attr_sync)) + vars->link_attr_sync = SHMEM2_RD(sc, + link_attr_sync[params->port]); + + PMD_DRV_LOG(DEBUG, "link_status 0x%x phy_link_up %x int_mask 0x%x", + vars->link_status, vars->phy_link_up, vars->aeu_int_mask); + PMD_DRV_LOG(DEBUG, "line_speed %x duplex %x flow_ctrl 0x%x", + vars->line_speed, vars->duplex, vars->flow_ctrl); +} + +static void elink_set_master_ln(struct elink_params *params, + struct elink_phy *phy) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t new_master_ln, ser_lane; + ser_lane = ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); + + /* Set the master_ln for AN */ + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_TEST_MODE_LANE, &new_master_ln); + + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_TEST_MODE_LANE, + (new_master_ln | ser_lane)); +} + +static elink_status_t elink_reset_unicore(struct elink_params *params, + struct elink_phy *phy, + uint8_t set_serdes) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t mii_control; + uint16_t i; + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); + + /* Reset the unicore */ + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, + (mii_control | MDIO_COMBO_IEEO_MII_CONTROL_RESET)); + if (set_serdes) + elink_set_serdes_access(sc, params->port); + + /* Wait for the reset to self clear */ + for (i = 0; i < ELINK_MDIO_ACCESS_TIMEOUT; i++) { + DELAY(5); + + /* The reset erased the previous bank value */ + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); + + if (!(mii_control & MDIO_COMBO_IEEO_MII_CONTROL_RESET)) { + DELAY(5); + return ELINK_STATUS_OK; + } + } + + elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, params->port); // "Warning: PHY was not initialized," + // " Port %d", + + PMD_DRV_LOG(DEBUG, "BUG! XGXS is still in reset!"); + return ELINK_STATUS_ERROR; + +} + +static void elink_set_swap_lanes(struct elink_params *params, + struct elink_phy *phy) +{ + struct bnx2x_softc *sc = params->sc; + /* Each two bits represents a lane number: + * No swap is 0123 => 0x1b no need to enable the swap + */ + uint16_t rx_lane_swap, tx_lane_swap; + + rx_lane_swap = ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_RX_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_RX_SHIFT); + tx_lane_swap = ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_TX_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_TX_SHIFT); + + if (rx_lane_swap != 0x1b) { + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_RX_LN_SWAP, + (rx_lane_swap | + MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE | + MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE)); + } else { + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_RX_LN_SWAP, 0); + } + + if (tx_lane_swap != 0x1b) { + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_TX_LN_SWAP, + (tx_lane_swap | + MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE)); + } else { + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_TX_LN_SWAP, 0); + } +} + +static void elink_set_parallel_detection(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t control2; + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, &control2); + if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) + control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; + else + control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; + PMD_DRV_LOG(DEBUG, "phy->speed_cap_mask = 0x%x, control2 = 0x%x", + phy->speed_cap_mask, control2); + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_CONTROL2, control2); + + if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && + (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { + PMD_DRV_LOG(DEBUG, "XGXS"); + + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_10G_PARALLEL_DETECT, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT); + + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_10G_PARALLEL_DETECT, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, + &control2); + + control2 |= + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN; + + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_10G_PARALLEL_DETECT, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL, + control2); + + /* Disable parallel detection of HiG */ + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_XGXS_BLOCK2, + MDIO_XGXS_BLOCK2_UNICORE_MODE_10G, + MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS | + MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS); + } +} + +static void elink_set_autoneg(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars, uint8_t enable_cl73) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t reg_val; + + /* CL37 Autoneg */ + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, ®_val); + + /* CL37 Autoneg Enabled */ + if (vars->line_speed == ELINK_SPEED_AUTO_NEG) + reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_AN_EN; + else /* CL37 Autoneg Disabled */ + reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | + MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN); + + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, reg_val); + + /* Enable/Disable Autodetection */ + + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, ®_val); + reg_val &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN | + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT); + reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE; + if (vars->line_speed == ELINK_SPEED_AUTO_NEG) + reg_val |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET; + else + reg_val &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET; + + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, reg_val); + + /* Enable TetonII and BAM autoneg */ + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_BAM_NEXT_PAGE, + MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, ®_val); + if (vars->line_speed == ELINK_SPEED_AUTO_NEG) { + /* Enable BAM aneg Mode and TetonII aneg Mode */ + reg_val |= (MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE | + MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN); + } else { + /* TetonII and BAM Autoneg Disabled */ + reg_val &= ~(MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE | + MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN); + } + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_BAM_NEXT_PAGE, + MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL, reg_val); + + if (enable_cl73) { + /* Enable Cl73 FSM status bits */ + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_USERB0, + MDIO_CL73_USERB0_CL73_UCTRL, 0xe); + + /* Enable BAM Station Manager */ + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_USERB0, + MDIO_CL73_USERB0_CL73_BAM_CTRL1, + MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN | + MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN + | + MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN); + + /* Advertise CL73 link speeds */ + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_ADV2, ®_val); + if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) + reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4; + if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) + reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX; + + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_ADV2, reg_val); + + /* CL73 Autoneg Enabled */ + reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN; + + } else /* CL73 Autoneg Disabled */ + reg_val = 0; + + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_IEEEB0, + MDIO_CL73_IEEEB0_CL73_AN_CONTROL, reg_val); +} + +/* Program SerDes, forced speed */ +static void elink_program_serdes(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t reg_val; + + /* Program duplex, disable autoneg and sgmii */ + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, ®_val); + reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX | + MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | + MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK); + if (phy->req_duplex == DUPLEX_FULL) + reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX; + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, reg_val); + + /* Program speed + * - needed only if the speed is greater than 1G (2.5G or 10G) + */ + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_MISC1, ®_val); + /* Clearing the speed value before setting the right speed */ + PMD_DRV_LOG(DEBUG, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x", reg_val); + + reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK | + MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL); + + if (!((vars->line_speed == ELINK_SPEED_1000) || + (vars->line_speed == ELINK_SPEED_100) || + (vars->line_speed == ELINK_SPEED_10))) { + + reg_val |= (MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M | + MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL); + if (vars->line_speed == ELINK_SPEED_10000) + reg_val |= + MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4; + } + + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_MISC1, reg_val); + +} + +static void elink_set_brcm_cl37_advertisement(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val = 0; + + /* Set extended capabilities */ + if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) + val |= MDIO_OVER_1G_UP1_2_5G; + if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) + val |= MDIO_OVER_1G_UP1_10G; + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_OVER_1G, MDIO_OVER_1G_UP1, val); + + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_OVER_1G, MDIO_OVER_1G_UP3, 0x400); +} + +static void elink_set_ieee_aneg_advertisement(struct elink_phy *phy, + struct elink_params *params, + uint16_t ieee_fc) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val; + /* For AN, we are always publishing full duplex */ + + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_AUTO_NEG_ADV, ieee_fc); + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_ADV1, &val); + val &= ~MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH; + val |= ((ieee_fc << 3) & MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK); + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_ADV1, val); +} + +static void elink_restart_autoneg(struct elink_phy *phy, + struct elink_params *params, + uint8_t enable_cl73) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t mii_control; + + PMD_DRV_LOG(DEBUG, "elink_restart_autoneg"); + /* Enable and restart BAM/CL37 aneg */ + + if (enable_cl73) { + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_IEEEB0, + MDIO_CL73_IEEEB0_CL73_AN_CONTROL, + &mii_control); + + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_IEEEB0, + MDIO_CL73_IEEEB0_CL73_AN_CONTROL, + (mii_control | + MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN | + MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN)); + } else { + + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); + PMD_DRV_LOG(DEBUG, + "elink_restart_autoneg mii_control before = 0x%x", + mii_control); + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, + (mii_control | + MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | + MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN)); + } +} + +static void elink_initialize_sgmii_process(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t control1; + + /* In SGMII mode, the unicore is always slave */ + + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, &control1); + control1 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT; + /* Set sgmii mode (and not fiber) */ + control1 &= ~(MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE | + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET | + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE); + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_CONTROL1, control1); + + /* If forced speed */ + if (!(vars->line_speed == ELINK_SPEED_AUTO_NEG)) { + /* Set speed, disable autoneg */ + uint16_t mii_control; + + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); + mii_control &= ~(MDIO_COMBO_IEEO_MII_CONTROL_AN_EN | + MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK | + MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX); + + switch (vars->line_speed) { + case ELINK_SPEED_100: + mii_control |= + MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100; + break; + case ELINK_SPEED_1000: + mii_control |= + MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000; + break; + case ELINK_SPEED_10: + /* There is nothing to set for 10M */ + break; + default: + /* Invalid speed for SGMII */ + PMD_DRV_LOG(DEBUG, "Invalid line_speed 0x%x", + vars->line_speed); + break; + } + + /* Setting the full duplex */ + if (phy->req_duplex == DUPLEX_FULL) + mii_control |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX; + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_MII_CONTROL, mii_control); + + } else { /* AN mode */ + /* Enable and restart AN */ + elink_restart_autoneg(phy, params, 0); + } +} + +/* Link management + */ +static elink_status_t elink_direct_parallel_detect_used(struct elink_phy *phy, + struct elink_params + *params) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t pd_10g, status2_1000x; + if (phy->req_line_speed != ELINK_SPEED_AUTO_NEG) + return ELINK_STATUS_OK; + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_STATUS2, &status2_1000x); + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_SERDES_DIGITAL, + MDIO_SERDES_DIGITAL_A_1000X_STATUS2, &status2_1000x); + if (status2_1000x & MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED) { + PMD_DRV_LOG(DEBUG, "1G parallel detect link on port %d", + params->port); + return 1; + } + + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_10G_PARALLEL_DETECT, + MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS, &pd_10g); + + if (pd_10g & MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK) { + PMD_DRV_LOG(DEBUG, "10G parallel detect link on port %d", + params->port); + return 1; + } + return ELINK_STATUS_OK; +} + +static void elink_update_adv_fc(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars, uint32_t gp_status) +{ + uint16_t ld_pause; /* local driver */ + uint16_t lp_pause; /* link partner */ + uint16_t pause_result; + struct bnx2x_softc *sc = params->sc; + if ((gp_status & + (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | + MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) == + (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE | + MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) { + + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_ADV1, &ld_pause); + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_LP_ADV1, &lp_pause); + pause_result = (ld_pause & + MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK) >> 8; + pause_result |= (lp_pause & + MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK) >> 10; + PMD_DRV_LOG(DEBUG, "pause_result CL73 0x%x", pause_result); + } else { + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_AUTO_NEG_ADV, &ld_pause); + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_COMBO_IEEE0, + MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1, + &lp_pause); + pause_result = (ld_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) >> 5; + pause_result |= (lp_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) >> 7; + PMD_DRV_LOG(DEBUG, "pause_result CL37 0x%x", pause_result); + } + elink_pause_resolve(vars, pause_result); + +} + +static void elink_flow_ctrl_resolve(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars, uint32_t gp_status) +{ + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + + /* Resolve from gp_status in case of AN complete and not sgmii */ + if (phy->req_flow_ctrl != ELINK_FLOW_CTRL_AUTO) { + /* Update the advertised flow-controled of LD/LP in AN */ + if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG) + elink_update_adv_fc(phy, params, vars, gp_status); + /* But set the flow-control result as the requested one */ + vars->flow_ctrl = phy->req_flow_ctrl; + } else if (phy->req_line_speed != ELINK_SPEED_AUTO_NEG) + vars->flow_ctrl = params->req_fc_auto_adv; + else if ((gp_status & ELINK_MDIO_AN_CL73_OR_37_COMPLETE) && + (!(vars->phy_flags & PHY_SGMII_FLAG))) { + if (elink_direct_parallel_detect_used(phy, params)) { + vars->flow_ctrl = params->req_fc_auto_adv; + return; + } + elink_update_adv_fc(phy, params, vars, gp_status); + } + PMD_DRV_LOG(DEBUG, "flow_ctrl 0x%x", vars->flow_ctrl); +} + +static void elink_check_fallback_to_cl37(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t rx_status, ustat_val, cl37_fsm_received; + PMD_DRV_LOG(DEBUG, "elink_check_fallback_to_cl37"); + /* Step 1: Make sure signal is detected */ + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_RX0, MDIO_RX0_RX_STATUS, &rx_status); + if ((rx_status & MDIO_RX0_RX_STATUS_SIGDET) != + (MDIO_RX0_RX_STATUS_SIGDET)) { + PMD_DRV_LOG(DEBUG, "Signal is not detected. Restoring CL73." + "rx_status(0x80b0) = 0x%x", rx_status); + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_IEEEB0, + MDIO_CL73_IEEEB0_CL73_AN_CONTROL, + MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN); + return; + } + /* Step 2: Check CL73 state machine */ + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_USERB0, + MDIO_CL73_USERB0_CL73_USTAT1, &ustat_val); + if ((ustat_val & + (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK | + MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) != + (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK | + MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) { + PMD_DRV_LOG(DEBUG, "CL73 state-machine is not stable. " + "ustat_val(0x8371) = 0x%x", ustat_val); + return; + } + /* Step 3: Check CL37 Message Pages received to indicate LP + * supports only CL37 + */ + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_REMOTE_PHY, + MDIO_REMOTE_PHY_MISC_RX_STATUS, &cl37_fsm_received); + if ((cl37_fsm_received & + (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG | + MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) != + (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG | + MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) { + PMD_DRV_LOG(DEBUG, "No CL37 FSM were received. " + "misc_rx_status(0x8330) = 0x%x", cl37_fsm_received); + return; + } + /* The combined cl37/cl73 fsm state information indicating that + * we are connected to a device which does not support cl73, but + * does support cl37 BAM. In this case we disable cl73 and + * restart cl37 auto-neg + */ + + /* Disable CL73 */ + CL22_WR_OVER_CL45(sc, phy, + MDIO_REG_BANK_CL73_IEEEB0, + MDIO_CL73_IEEEB0_CL73_AN_CONTROL, 0); + /* Restart CL37 autoneg */ + elink_restart_autoneg(phy, params, 0); + PMD_DRV_LOG(DEBUG, "Disabling CL73, and restarting CL37 autoneg"); +} + +static void elink_xgxs_an_resolve(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars, uint32_t gp_status) +{ + if (gp_status & ELINK_MDIO_AN_CL73_OR_37_COMPLETE) + vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + + if (elink_direct_parallel_detect_used(phy, params)) + vars->link_status |= LINK_STATUS_PARALLEL_DETECTION_USED; +} + +static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy, + struct elink_params *params __rte_unused, + struct elink_vars *vars, + uint16_t is_link_up, + uint16_t speed_mask, + uint16_t is_duplex) +{ + if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG) + vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED; + if (is_link_up) { + PMD_DRV_LOG(DEBUG, "phy link up"); + + vars->phy_link_up = 1; + vars->link_status |= LINK_STATUS_LINK_UP; + + switch (speed_mask) { + case ELINK_GP_STATUS_10M: + vars->line_speed = ELINK_SPEED_10; + if (is_duplex == DUPLEX_FULL) + vars->link_status |= ELINK_LINK_10TFD; + else + vars->link_status |= ELINK_LINK_10THD; + break; + + case ELINK_GP_STATUS_100M: + vars->line_speed = ELINK_SPEED_100; + if (is_duplex == DUPLEX_FULL) + vars->link_status |= ELINK_LINK_100TXFD; + else + vars->link_status |= ELINK_LINK_100TXHD; + break; + + case ELINK_GP_STATUS_1G: + case ELINK_GP_STATUS_1G_KX: + vars->line_speed = ELINK_SPEED_1000; + if (is_duplex == DUPLEX_FULL) + vars->link_status |= ELINK_LINK_1000TFD; + else + vars->link_status |= ELINK_LINK_1000THD; + break; + + case ELINK_GP_STATUS_2_5G: + vars->line_speed = ELINK_SPEED_2500; + if (is_duplex == DUPLEX_FULL) + vars->link_status |= ELINK_LINK_2500TFD; + else + vars->link_status |= ELINK_LINK_2500THD; + break; + + case ELINK_GP_STATUS_5G: + case ELINK_GP_STATUS_6G: + PMD_DRV_LOG(DEBUG, + "link speed unsupported gp_status 0x%x", + speed_mask); + return ELINK_STATUS_ERROR; + + case ELINK_GP_STATUS_10G_KX4: + case ELINK_GP_STATUS_10G_HIG: + case ELINK_GP_STATUS_10G_CX4: + case ELINK_GP_STATUS_10G_KR: + case ELINK_GP_STATUS_10G_SFI: + case ELINK_GP_STATUS_10G_XFI: + vars->line_speed = ELINK_SPEED_10000; + vars->link_status |= ELINK_LINK_10GTFD; + break; + case ELINK_GP_STATUS_20G_DXGXS: + case ELINK_GP_STATUS_20G_KR2: + vars->line_speed = ELINK_SPEED_20000; + vars->link_status |= ELINK_LINK_20GTFD; + break; + default: + PMD_DRV_LOG(DEBUG, + "link speed unsupported gp_status 0x%x", + speed_mask); + return ELINK_STATUS_ERROR; + } + } else { /* link_down */ + PMD_DRV_LOG(DEBUG, "phy link down"); + + vars->phy_link_up = 0; + + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + vars->mac_type = ELINK_MAC_TYPE_NONE; + } + PMD_DRV_LOG(DEBUG, " phy_link_up %x line_speed %d", + vars->phy_link_up, vars->line_speed); + return ELINK_STATUS_OK; +} + +static elink_status_t elink_link_settings_status(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + + uint16_t gp_status, duplex = DUPLEX_HALF, link_up = 0, speed_mask; + elink_status_t rc = ELINK_STATUS_OK; + + /* Read gp_status */ + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_GP_STATUS, + MDIO_GP_STATUS_TOP_AN_STATUS1, &gp_status); + if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS) + duplex = DUPLEX_FULL; + if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) + link_up = 1; + speed_mask = gp_status & ELINK_GP_STATUS_SPEED_MASK; + PMD_DRV_LOG(DEBUG, "gp_status 0x%x, is_link_up %d, speed_mask 0x%x", + gp_status, link_up, speed_mask); + rc = elink_get_link_speed_duplex(phy, params, vars, link_up, speed_mask, + duplex); + if (rc == ELINK_STATUS_ERROR) + return rc; + + if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { + if (ELINK_SINGLE_MEDIA_DIRECT(params)) { + vars->duplex = duplex; + elink_flow_ctrl_resolve(phy, params, vars, gp_status); + if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG) + elink_xgxs_an_resolve(phy, params, vars, + gp_status); + } + } else { /* Link_down */ + if ((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) && + ELINK_SINGLE_MEDIA_DIRECT(params)) { + /* Check signal is detected */ + elink_check_fallback_to_cl37(phy, params); + } + } + + /* Read LP advertised speeds */ + if (ELINK_SINGLE_MEDIA_DIRECT(params) && + (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE)) { + uint16_t val; + + CL22_RD_OVER_CL45(sc, phy, MDIO_REG_BANK_CL73_IEEEB1, + MDIO_CL73_IEEEB1_AN_LP_ADV2, &val); + + if (val & MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE; + if (val & (MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 | + MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + + CL22_RD_OVER_CL45(sc, phy, MDIO_REG_BANK_OVER_1G, + MDIO_OVER_1G_LP_UP1, &val); + + if (val & MDIO_OVER_1G_UP1_2_5G) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE; + if (val & (MDIO_OVER_1G_UP1_10G | MDIO_OVER_1G_UP1_10GH)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + } + + PMD_DRV_LOG(DEBUG, "duplex %x flow_ctrl 0x%x link_status 0x%x", + vars->duplex, vars->flow_ctrl, vars->link_status); + return rc; +} + +static elink_status_t elink_warpcore_read_status(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t lane; + uint16_t gp_status1, gp_speed, link_up, duplex = DUPLEX_FULL; + elink_status_t rc = ELINK_STATUS_OK; + lane = elink_get_warpcore_lane(params); + /* Read gp_status */ + if ((params->loopback_mode) && (phy->flags & ELINK_FLAGS_WC_DUAL_MODE)) { + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up); + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_LINK_STATUS, &link_up); + link_up &= 0x1; + } else if ((phy->req_line_speed > ELINK_SPEED_10000) && + (phy->supported & ELINK_SUPPORTED_20000baseMLD2_Full)) { + uint16_t temp_link_up; + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 1, &temp_link_up); + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 1, &link_up); + PMD_DRV_LOG(DEBUG, "PCS RX link status = 0x%x-->0x%x", + temp_link_up, link_up); + link_up &= (1 << 2); + if (link_up) + elink_ext_phy_resolve_fc(phy, params, vars); + } else { + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_1, &gp_status1); + PMD_DRV_LOG(DEBUG, "0x81d1 = 0x%x", gp_status1); + /* Check for either KR, 1G, or AN up. */ + link_up = ((gp_status1 >> 8) | + (gp_status1 >> 12) | (gp_status1)) & (1 << lane); + if (phy->supported & ELINK_SUPPORTED_20000baseKR2_Full) { + uint16_t an_link; + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_STATUS, &an_link); + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_STATUS, &an_link); + link_up |= (an_link & (1 << 2)); + } + if (link_up && ELINK_SINGLE_MEDIA_DIRECT(params)) { + uint16_t pd, gp_status4; + if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG) { + /* Check Autoneg complete */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_4, + &gp_status4); + if (gp_status4 & ((1 << 12) << lane)) + vars->link_status |= + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + + /* Check parallel detect used */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_PAR_DET_10G_STATUS, + &pd); + if (pd & (1 << 15)) + vars->link_status |= + LINK_STATUS_PARALLEL_DETECTION_USED; + } + elink_ext_phy_resolve_fc(phy, params, vars); + vars->duplex = duplex; + } + } + + if ((vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) && + ELINK_SINGLE_MEDIA_DIRECT(params)) { + uint16_t val; + + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG2, &val); + + if (val & MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE; + if (val & (MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4 | + MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL3_LP_UP1, &val); + + if (val & MDIO_OVER_1G_UP1_2_5G) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_2500XFD_CAPABLE; + if (val & (MDIO_OVER_1G_UP1_10G | MDIO_OVER_1G_UP1_10GH)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + + } + + if (lane < 2) { + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_2, &gp_speed); + } else { + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_3, &gp_speed); + } + PMD_DRV_LOG(DEBUG, "lane %d gp_speed 0x%x", lane, gp_speed); + + if ((lane & 1) == 0) + gp_speed <<= 8; + gp_speed &= 0x3f00; + link_up = ! !link_up; + + /* Reset the TX FIFO to fix SGMII issue */ + rc = elink_get_link_speed_duplex(phy, params, vars, link_up, gp_speed, + duplex); + + /* In case of KR link down, start up the recovering procedure */ + if ((!link_up) && (phy->media_type == ELINK_ETH_PHY_KR) && + (!(phy->flags & ELINK_FLAGS_WC_DUAL_MODE))) + vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; + + PMD_DRV_LOG(DEBUG, "duplex %x flow_ctrl 0x%x link_status 0x%x", + vars->duplex, vars->flow_ctrl, vars->link_status); + return rc; +} + +static void elink_set_gmii_tx_driver(struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + struct elink_phy *phy = ¶ms->phy[ELINK_INT_PHY]; + uint16_t lp_up2; + uint16_t tx_driver; + uint16_t bank; + + /* Read precomp */ + CL22_RD_OVER_CL45(sc, phy, + MDIO_REG_BANK_OVER_1G, MDIO_OVER_1G_LP_UP2, &lp_up2); + + /* Bits [10:7] at lp_up2, positioned at [15:12] */ + lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >> + MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT) << + MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT); + + if (lp_up2 == 0) + return; + + for (bank = MDIO_REG_BANK_TX0; bank <= MDIO_REG_BANK_TX3; + bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0)) { + CL22_RD_OVER_CL45(sc, phy, + bank, MDIO_TX0_TX_DRIVER, &tx_driver); + + /* Replace tx_driver bits [15:12] */ + if (lp_up2 != (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK)) { + tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK; + tx_driver |= lp_up2; + CL22_WR_OVER_CL45(sc, phy, + bank, MDIO_TX0_TX_DRIVER, tx_driver); + } + } +} + +static elink_status_t elink_emac_program(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t port = params->port; + uint16_t mode = 0; + + PMD_DRV_LOG(DEBUG, "setting link speed & duplex"); + elink_bits_dis(sc, GRCBASE_EMAC0 + port * 0x400 + + EMAC_REG_EMAC_MODE, + (EMAC_MODE_25G_MODE | + EMAC_MODE_PORT_MII_10M | EMAC_MODE_HALF_DUPLEX)); + switch (vars->line_speed) { + case ELINK_SPEED_10: + mode |= EMAC_MODE_PORT_MII_10M; + break; + + case ELINK_SPEED_100: + mode |= EMAC_MODE_PORT_MII; + break; + + case ELINK_SPEED_1000: + mode |= EMAC_MODE_PORT_GMII; + break; + + case ELINK_SPEED_2500: + mode |= (EMAC_MODE_25G_MODE | EMAC_MODE_PORT_GMII); + break; + + default: + /* 10G not valid for EMAC */ + PMD_DRV_LOG(DEBUG, "Invalid line_speed 0x%x", vars->line_speed); + return ELINK_STATUS_ERROR; + } + + if (vars->duplex == DUPLEX_HALF) + mode |= EMAC_MODE_HALF_DUPLEX; + elink_bits_en(sc, + GRCBASE_EMAC0 + port * 0x400 + EMAC_REG_EMAC_MODE, mode); + + elink_set_led(params, vars, ELINK_LED_MODE_OPER, vars->line_speed); + return ELINK_STATUS_OK; +} + +static void elink_set_preemphasis(struct elink_phy *phy, + struct elink_params *params) +{ + + uint16_t bank, i = 0; + struct bnx2x_softc *sc = params->sc; + + for (bank = MDIO_REG_BANK_RX0, i = 0; bank <= MDIO_REG_BANK_RX3; + bank += (MDIO_REG_BANK_RX1 - MDIO_REG_BANK_RX0), i++) { + CL22_WR_OVER_CL45(sc, phy, + bank, + MDIO_RX0_RX_EQ_BOOST, phy->rx_preemphasis[i]); + } + + for (bank = MDIO_REG_BANK_TX0, i = 0; bank <= MDIO_REG_BANK_TX3; + bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0), i++) { + CL22_WR_OVER_CL45(sc, phy, + bank, + MDIO_TX0_TX_DRIVER, phy->tx_preemphasis[i]); + } +} + +static void elink_xgxs_config_init(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + uint8_t enable_cl73 = (ELINK_SINGLE_MEDIA_DIRECT(params) || + (params->loopback_mode == ELINK_LOOPBACK_XGXS)); + + if (!(vars->phy_flags & PHY_SGMII_FLAG)) { + if (ELINK_SINGLE_MEDIA_DIRECT(params) && + (params->feature_config_flags & + ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) + elink_set_preemphasis(phy, params); + + /* Forced speed requested? */ + if (vars->line_speed != ELINK_SPEED_AUTO_NEG || + (ELINK_SINGLE_MEDIA_DIRECT(params) && + params->loopback_mode == ELINK_LOOPBACK_EXT)) { + PMD_DRV_LOG(DEBUG, "not SGMII, no AN"); + + /* Disable autoneg */ + elink_set_autoneg(phy, params, vars, 0); + + /* Program speed and duplex */ + elink_program_serdes(phy, params, vars); + + } else { /* AN_mode */ + PMD_DRV_LOG(DEBUG, "not SGMII, AN"); + + /* AN enabled */ + elink_set_brcm_cl37_advertisement(phy, params); + + /* Program duplex & pause advertisement (for aneg) */ + elink_set_ieee_aneg_advertisement(phy, params, + vars->ieee_fc); + + /* Enable autoneg */ + elink_set_autoneg(phy, params, vars, enable_cl73); + + /* Enable and restart AN */ + elink_restart_autoneg(phy, params, enable_cl73); + } + + } else { /* SGMII mode */ + PMD_DRV_LOG(DEBUG, "SGMII"); + + elink_initialize_sgmii_process(phy, params, vars); + } +} + +static elink_status_t elink_prepare_xgxs(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + elink_status_t rc; + vars->phy_flags |= PHY_XGXS_FLAG; + if ((phy->req_line_speed && + ((phy->req_line_speed == ELINK_SPEED_100) || + (phy->req_line_speed == ELINK_SPEED_10))) || + (!phy->req_line_speed && + (phy->speed_cap_mask >= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && + (phy->speed_cap_mask < + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (phy->type == PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT_SD)) + vars->phy_flags |= PHY_SGMII_FLAG; + else + vars->phy_flags &= ~PHY_SGMII_FLAG; + + elink_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); + elink_set_aer_mmd(params, phy); + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + elink_set_master_ln(params, phy); + + rc = elink_reset_unicore(params, phy, 0); + /* Reset the SerDes and wait for reset bit return low */ + if (rc != ELINK_STATUS_OK) + return rc; + + elink_set_aer_mmd(params, phy); + /* Setting the masterLn_def again after the reset */ + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) { + elink_set_master_ln(params, phy); + elink_set_swap_lanes(params, phy); + } + + return rc; +} + +static uint16_t elink_wait_reset_complete(struct bnx2x_softc *sc, + struct elink_phy *phy, + struct elink_params *params) +{ + uint16_t cnt, ctrl; + /* Wait for soft reset to get cleared up to 1 sec */ + for (cnt = 0; cnt < 1000; cnt++) { + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE) + elink_cl22_read(sc, phy, MDIO_PMA_REG_CTRL, &ctrl); + else + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, &ctrl); + if (!(ctrl & (1 << 15))) + break; + DELAY(1000 * 1); + } + + if (cnt == 1000) + elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, params->port); // "Warning: PHY was not initialized," + // " Port %d", + + PMD_DRV_LOG(DEBUG, "control reg 0x%x (after %d ms)", ctrl, cnt); + return cnt; +} + +static void elink_link_int_enable(struct elink_params *params) +{ + uint8_t port = params->port; + uint32_t mask; + struct bnx2x_softc *sc = params->sc; + + /* Setting the status to report on link up for either XGXS or SerDes */ + if (CHIP_IS_E3(sc)) { + mask = ELINK_NIG_MASK_XGXS0_LINK_STATUS; + if (!(ELINK_SINGLE_MEDIA_DIRECT(params))) + mask |= ELINK_NIG_MASK_MI_INT; + } else if (params->switch_cfg == ELINK_SWITCH_CFG_10G) { + mask = (ELINK_NIG_MASK_XGXS0_LINK10G | + ELINK_NIG_MASK_XGXS0_LINK_STATUS); + PMD_DRV_LOG(DEBUG, "enabled XGXS interrupt"); + if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) && + params->phy[ELINK_INT_PHY].type != + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) { + mask |= ELINK_NIG_MASK_MI_INT; + PMD_DRV_LOG(DEBUG, "enabled external phy int"); + } + + } else { /* SerDes */ + mask = ELINK_NIG_MASK_SERDES0_LINK_STATUS; + PMD_DRV_LOG(DEBUG, "enabled SerDes interrupt"); + if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) && + params->phy[ELINK_INT_PHY].type != + PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN) { + mask |= ELINK_NIG_MASK_MI_INT; + PMD_DRV_LOG(DEBUG, "enabled external phy int"); + } + } + elink_bits_en(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, mask); + + PMD_DRV_LOG(DEBUG, "port %x, is_xgxs %x, int_status 0x%x", port, + (params->switch_cfg == ELINK_SWITCH_CFG_10G), + REG_RD(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4)); + PMD_DRV_LOG(DEBUG, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x", + REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4), + REG_RD(sc, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port * 0x18), + REG_RD(sc, + NIG_REG_SERDES0_STATUS_LINK_STATUS + port * 0x3c)); + PMD_DRV_LOG(DEBUG, " 10G %x, XGXS_LINK %x", + REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK10G + port * 0x68), + REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK_STATUS + port * 0x68)); +} + +static void elink_rearm_latch_signal(struct bnx2x_softc *sc, uint8_t port, + uint8_t exp_mi_int) +{ + uint32_t latch_status = 0; + + /* Disable the MI INT ( external phy int ) by writing 1 to the + * status register. Link down indication is high-active-signal, + * so in this case we need to write the status to clear the XOR + */ + /* Read Latched signals */ + latch_status = REG_RD(sc, NIG_REG_LATCH_STATUS_0 + port * 8); + PMD_DRV_LOG(DEBUG, "latch_status = 0x%x", latch_status); + /* Handle only those with latched-signal=up. */ + if (exp_mi_int) + elink_bits_en(sc, + NIG_REG_STATUS_INTERRUPT_PORT0 + + port * 4, ELINK_NIG_STATUS_EMAC0_MI_INT); + else + elink_bits_dis(sc, + NIG_REG_STATUS_INTERRUPT_PORT0 + + port * 4, ELINK_NIG_STATUS_EMAC0_MI_INT); + + if (latch_status & 1) { + + /* For all latched-signal=up : Re-Arm Latch signals */ + REG_WR(sc, NIG_REG_LATCH_STATUS_0 + port * 8, + (latch_status & 0xfffe) | (latch_status & 1)); + } + /* For all latched-signal=up,Write original_signal to status */ +} + +static void elink_link_int_ack(struct elink_params *params, + struct elink_vars *vars, uint8_t is_10g_plus) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t port = params->port; + uint32_t mask; + /* First reset all status we assume only one line will be + * change at a time + */ + elink_bits_dis(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4, + (ELINK_NIG_STATUS_XGXS0_LINK10G | + ELINK_NIG_STATUS_XGXS0_LINK_STATUS | + ELINK_NIG_STATUS_SERDES0_LINK_STATUS)); + if (vars->phy_link_up) { + if (USES_WARPCORE(sc)) + mask = ELINK_NIG_STATUS_XGXS0_LINK_STATUS; + else { + if (is_10g_plus) + mask = ELINK_NIG_STATUS_XGXS0_LINK10G; + else if (params->switch_cfg == ELINK_SWITCH_CFG_10G) { + /* Disable the link interrupt by writing 1 to + * the relevant lane in the status register + */ + uint32_t ser_lane = + ((params->lane_config & + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> + PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); + mask = ((1 << ser_lane) << + ELINK_NIG_STATUS_XGXS0_LINK_STATUS_SIZE); + } else + mask = ELINK_NIG_STATUS_SERDES0_LINK_STATUS; + } + PMD_DRV_LOG(DEBUG, "Ack link up interrupt with mask 0x%x", + mask); + elink_bits_en(sc, + NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4, mask); + } +} + +static elink_status_t elink_format_ver(uint32_t num, uint8_t * str, + uint16_t * len) +{ + uint8_t *str_ptr = str; + uint32_t mask = 0xf0000000; + uint8_t shift = 8 * 4; + uint8_t digit; + uint8_t remove_leading_zeros = 1; + if (*len < 10) { + /* Need more than 10chars for this format */ + *str_ptr = '\0'; + (*len)--; + return ELINK_STATUS_ERROR; + } + while (shift > 0) { + + shift -= 4; + digit = ((num & mask) >> shift); + if (digit == 0 && remove_leading_zeros) { + mask = mask >> 4; + continue; + } else if (digit < 0xa) + *str_ptr = digit + '0'; + else + *str_ptr = digit - 0xa + 'a'; + remove_leading_zeros = 0; + str_ptr++; + (*len)--; + mask = mask >> 4; + if (shift == 4 * 4) { + *str_ptr = '.'; + str_ptr++; + (*len)--; + remove_leading_zeros = 1; + } + } + return ELINK_STATUS_OK; +} + +static elink_status_t elink_null_format_ver(__rte_unused uint32_t spirom_ver, + uint8_t * str, uint16_t * len) +{ + str[0] = '\0'; + (*len)--; + return ELINK_STATUS_OK; +} + +static void elink_set_xgxs_loopback(struct elink_phy *phy, + struct elink_params *params) +{ + uint8_t port = params->port; + struct bnx2x_softc *sc = params->sc; + + if (phy->req_line_speed != ELINK_SPEED_1000) { + uint32_t md_devad = 0; + + PMD_DRV_LOG(DEBUG, "XGXS 10G loopback enable"); + + if (!CHIP_IS_E3(sc)) { + /* Change the uni_phy_addr in the nig */ + md_devad = REG_RD(sc, (NIG_REG_XGXS0_CTRL_MD_DEVAD + + port * 0x18)); + + REG_WR(sc, NIG_REG_XGXS0_CTRL_MD_DEVAD + port * 0x18, + 0x5); + } + + elink_cl45_write(sc, phy, + 5, + (MDIO_REG_BANK_AER_BLOCK + + (MDIO_AER_BLOCK_AER_REG & 0xf)), 0x2800); + + elink_cl45_write(sc, phy, + 5, + (MDIO_REG_BANK_CL73_IEEEB0 + + (MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)), + 0x6041); + DELAY(1000 * 200); + /* Set aer mmd back */ + elink_set_aer_mmd(params, phy); + + if (!CHIP_IS_E3(sc)) { + /* And md_devad */ + REG_WR(sc, NIG_REG_XGXS0_CTRL_MD_DEVAD + port * 0x18, + md_devad); + } + } else { + uint16_t mii_ctrl; + PMD_DRV_LOG(DEBUG, "XGXS 1G loopback enable"); + elink_cl45_read(sc, phy, 5, + (MDIO_REG_BANK_COMBO_IEEE0 + + (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)), + &mii_ctrl); + elink_cl45_write(sc, phy, 5, + (MDIO_REG_BANK_COMBO_IEEE0 + + (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)), + mii_ctrl | + MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK); + } +} + +elink_status_t elink_set_led(struct elink_params *params, + struct elink_vars *vars, uint8_t mode, + uint32_t speed) +{ + uint8_t port = params->port; + uint16_t hw_led_mode = params->hw_led_mode; + elink_status_t rc = ELINK_STATUS_OK; + uint8_t phy_idx; + uint32_t tmp; + uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; + struct bnx2x_softc *sc = params->sc; + PMD_DRV_LOG(DEBUG, "elink_set_led: port %x, mode %d", port, mode); + PMD_DRV_LOG(DEBUG, "speed 0x%x, hw_led_mode 0x%x", speed, hw_led_mode); + /* In case */ + for (phy_idx = ELINK_EXT_PHY1; phy_idx < ELINK_MAX_PHYS; phy_idx++) { + if (params->phy[phy_idx].set_link_led) { + params->phy[phy_idx].set_link_led(¶ms->phy[phy_idx], + params, mode); + } + } +#ifdef ELINK_INCLUDE_EMUL + if (params->feature_config_flags & + ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC) + return rc; +#endif + + switch (mode) { + case ELINK_LED_MODE_FRONT_PANEL_OFF: + case ELINK_LED_MODE_OFF: + REG_WR(sc, NIG_REG_LED_10G_P0 + port * 4, 0); + REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4, + SHARED_HW_CFG_LED_MAC1); + + tmp = elink_cb_reg_read(sc, emac_base + EMAC_REG_EMAC_LED); + if (params->phy[ELINK_EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE) + tmp &= ~(EMAC_LED_1000MB_OVERRIDE | + EMAC_LED_100MB_OVERRIDE | + EMAC_LED_10MB_OVERRIDE); + else + tmp |= EMAC_LED_OVERRIDE; + + elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_LED, tmp); + break; + + case ELINK_LED_MODE_OPER: + /* For all other phys, OPER mode is same as ON, so in case + * link is down, do nothing + */ + if (!vars->link_up) + break; + case ELINK_LED_MODE_ON: + if (((params->phy[ELINK_EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727) || + (params->phy[ELINK_EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722)) && + CHIP_IS_E2(sc) && params->num_phys == 2) { + /* This is a work-around for E2+8727 Configurations */ + if (mode == ELINK_LED_MODE_ON || + speed == ELINK_SPEED_10000) { + REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4, 0); + REG_WR(sc, NIG_REG_LED_10G_P0 + port * 4, 1); + + tmp = + elink_cb_reg_read(sc, + emac_base + + EMAC_REG_EMAC_LED); + elink_cb_reg_write(sc, + emac_base + + EMAC_REG_EMAC_LED, + (tmp | EMAC_LED_OVERRIDE)); + /* Return here without enabling traffic + * LED blink and setting rate in ON mode. + * In oper mode, enabling LED blink + * and setting rate is needed. + */ + if (mode == ELINK_LED_MODE_ON) + return rc; + } + } else if (ELINK_SINGLE_MEDIA_DIRECT(params)) { + /* This is a work-around for HW issue found when link + * is up in CL73 + */ + if ((!CHIP_IS_E3(sc)) || + (CHIP_IS_E3(sc) && mode == ELINK_LED_MODE_ON)) + REG_WR(sc, NIG_REG_LED_10G_P0 + port * 4, 1); + + if (CHIP_IS_E1x(sc) || + CHIP_IS_E2(sc) || (mode == ELINK_LED_MODE_ON)) + REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4, 0); + else + REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4, + hw_led_mode); + } else if ((params->phy[ELINK_EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE) && + (mode == ELINK_LED_MODE_ON)) { + REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4, 0); + tmp = + elink_cb_reg_read(sc, + emac_base + EMAC_REG_EMAC_LED); + elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_LED, + tmp | EMAC_LED_OVERRIDE | + EMAC_LED_1000MB_OVERRIDE); + /* Break here; otherwise, it'll disable the + * intended override. + */ + break; + } else { + uint32_t nig_led_mode = ((params->hw_led_mode << + SHARED_HW_CFG_LED_MODE_SHIFT) + == + SHARED_HW_CFG_LED_EXTPHY2) + ? (SHARED_HW_CFG_LED_PHY1 >> + SHARED_HW_CFG_LED_MODE_SHIFT) : hw_led_mode; + REG_WR(sc, NIG_REG_LED_MODE_P0 + port * 4, + nig_led_mode); + } + + REG_WR(sc, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port * 4, + 0); + /* Set blinking rate to ~15.9Hz */ + if (CHIP_IS_E3(sc)) + REG_WR(sc, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port * 4, + LED_BLINK_RATE_VAL_E3); + else + REG_WR(sc, NIG_REG_LED_CONTROL_BLINK_RATE_P0 + port * 4, + LED_BLINK_RATE_VAL_E1X_E2); + REG_WR(sc, NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0 + port * 4, 1); + tmp = elink_cb_reg_read(sc, emac_base + EMAC_REG_EMAC_LED); + elink_cb_reg_write(sc, emac_base + EMAC_REG_EMAC_LED, + (tmp & (~EMAC_LED_OVERRIDE))); + + break; + + default: + rc = ELINK_STATUS_ERROR; + PMD_DRV_LOG(DEBUG, "elink_set_led: Invalid led mode %d", mode); + break; + } + return rc; + +} + +static elink_status_t elink_link_initialize(struct elink_params *params, + struct elink_vars *vars) +{ + elink_status_t rc = ELINK_STATUS_OK; + uint8_t phy_index, non_ext_phy; + struct bnx2x_softc *sc = params->sc; + /* In case of external phy existence, the line speed would be the + * line speed linked up by the external phy. In case it is direct + * only, then the line_speed during initialization will be + * equal to the req_line_speed + */ + vars->line_speed = params->phy[ELINK_INT_PHY].req_line_speed; + + /* Initialize the internal phy in case this is a direct board + * (no external phys), or this board has external phy which requires + * to first. + */ + if (!USES_WARPCORE(sc)) + elink_prepare_xgxs(¶ms->phy[ELINK_INT_PHY], params, vars); + /* init ext phy and enable link state int */ + non_ext_phy = (ELINK_SINGLE_MEDIA_DIRECT(params) || + (params->loopback_mode == ELINK_LOOPBACK_XGXS)); + + if (non_ext_phy || + (params->phy[ELINK_EXT_PHY1].flags & ELINK_FLAGS_INIT_XGXS_FIRST) || + (params->loopback_mode == ELINK_LOOPBACK_EXT_PHY)) { + struct elink_phy *phy = ¶ms->phy[ELINK_INT_PHY]; + if (vars->line_speed == ELINK_SPEED_AUTO_NEG && + (CHIP_IS_E1x(sc) || CHIP_IS_E2(sc))) + elink_set_parallel_detection(phy, params); + if (params->phy[ELINK_INT_PHY].config_init) + params->phy[ELINK_INT_PHY].config_init(phy, + params, vars); + } + + /* Re-read this value in case it was changed inside config_init due to + * limitations of optic module + */ + vars->line_speed = params->phy[ELINK_INT_PHY].req_line_speed; + + /* Init external phy */ + if (non_ext_phy) { + if (params->phy[ELINK_INT_PHY].supported & + ELINK_SUPPORTED_FIBRE) + vars->link_status |= LINK_STATUS_SERDES_LINK; + } else { + for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + /* No need to initialize second phy in case of first + * phy only selection. In case of second phy, we do + * need to initialize the first phy, since they are + * connected. + */ + if (params->phy[phy_index].supported & + ELINK_SUPPORTED_FIBRE) + vars->link_status |= LINK_STATUS_SERDES_LINK; + + if (phy_index == ELINK_EXT_PHY2 && + (elink_phy_selection(params) == + PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) { + PMD_DRV_LOG(DEBUG, + "Not initializing second phy"); + continue; + } + params->phy[phy_index].config_init(¶ms-> + phy[phy_index], + params, vars); + } + } + /* Reset the interrupt indication after phy was initialized */ + elink_bits_dis(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + + params->port * 4, + (ELINK_NIG_STATUS_XGXS0_LINK10G | + ELINK_NIG_STATUS_XGXS0_LINK_STATUS | + ELINK_NIG_STATUS_SERDES0_LINK_STATUS | + ELINK_NIG_MASK_MI_INT)); + return rc; +} + +static void elink_int_link_reset(__rte_unused struct elink_phy *phy, + struct elink_params *params) +{ + /* Reset the SerDes/XGXS */ + REG_WR(params->sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_3_CLEAR, + (0x1ff << (params->port * 16))); +} + +static void elink_common_ext_link_reset(__rte_unused struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t gpio_port; + /* HW reset */ + if (CHIP_IS_E2(sc)) + gpio_port = SC_PATH(sc); + else + gpio_port = params->port; + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port); + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port); + PMD_DRV_LOG(DEBUG, "reset external PHY"); +} + +static elink_status_t elink_update_link_down(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t port = params->port; + + PMD_DRV_LOG(DEBUG, "Port %x: Link is down", port); + elink_set_led(params, vars, ELINK_LED_MODE_OFF, 0); + vars->phy_flags &= ~PHY_PHYSICAL_LINK_FLAG; + /* Indicate no mac active */ + vars->mac_type = ELINK_MAC_TYPE_NONE; + + /* Update shared memory */ + vars->link_status &= ~ELINK_LINK_UPDATE_MASK; + vars->line_speed = 0; + elink_update_mng(params, vars->link_status); + + /* Activate nig drain */ + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + port * 4, 1); + + /* Disable emac */ + if (!CHIP_IS_E3(sc)) + REG_WR(sc, NIG_REG_NIG_EMAC0_EN + port * 4, 0); + + DELAY(1000 * 10); + /* Reset BigMac/Xmac */ + if (CHIP_IS_E1x(sc) || CHIP_IS_E2(sc)) + elink_set_bmac_rx(sc, params->port, 0); + + if (CHIP_IS_E3(sc)) { + /* Prevent LPI Generation by chip */ + REG_WR(sc, MISC_REG_CPMU_LP_FW_ENABLE_P0 + (params->port << 2), + 0); + REG_WR(sc, MISC_REG_CPMU_LP_MASK_ENT_P0 + (params->port << 2), + 0); + vars->eee_status &= ~(SHMEM_EEE_LP_ADV_STATUS_MASK | + SHMEM_EEE_ACTIVE_BIT); + + elink_update_mng_eee(params, vars->eee_status); + elink_set_xmac_rxtx(params, 0); + elink_set_umac_rxtx(params, 0); + } + + return ELINK_STATUS_OK; +} + +static elink_status_t elink_update_link_up(struct elink_params *params, + struct elink_vars *vars, + uint8_t link_10g) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t phy_idx, port = params->port; + elink_status_t rc = ELINK_STATUS_OK; + + vars->link_status |= (LINK_STATUS_LINK_UP | + LINK_STATUS_PHYSICAL_LINK_FLAG); + vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG; + + if (vars->flow_ctrl & ELINK_FLOW_CTRL_TX) + vars->link_status |= LINK_STATUS_TX_FLOW_CONTROL_ENABLED; + + if (vars->flow_ctrl & ELINK_FLOW_CTRL_RX) + vars->link_status |= LINK_STATUS_RX_FLOW_CONTROL_ENABLED; + if (USES_WARPCORE(sc)) { + if (link_10g) { + if (elink_xmac_enable(params, vars, 0) == + ELINK_STATUS_NO_LINK) { + PMD_DRV_LOG(DEBUG, "Found errors on XMAC"); + vars->link_up = 0; + vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; + vars->link_status &= ~LINK_STATUS_LINK_UP; + } + } else + elink_umac_enable(params, vars, 0); + elink_set_led(params, vars, + ELINK_LED_MODE_OPER, vars->line_speed); + + if ((vars->eee_status & SHMEM_EEE_ACTIVE_BIT) && + (vars->eee_status & SHMEM_EEE_LPI_REQUESTED_BIT)) { + PMD_DRV_LOG(DEBUG, "Enabling LPI assertion"); + REG_WR(sc, MISC_REG_CPMU_LP_FW_ENABLE_P0 + + (params->port << 2), 1); + REG_WR(sc, MISC_REG_CPMU_LP_DR_ENABLE, 1); + REG_WR(sc, MISC_REG_CPMU_LP_MASK_ENT_P0 + + (params->port << 2), 0xfc20); + } + } + if ((CHIP_IS_E1x(sc) || CHIP_IS_E2(sc))) { + if (link_10g) { + if (elink_bmac_enable(params, vars, 0, 1) == + ELINK_STATUS_NO_LINK) { + PMD_DRV_LOG(DEBUG, "Found errors on BMAC"); + vars->link_up = 0; + vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; + vars->link_status &= ~LINK_STATUS_LINK_UP; + } + + elink_set_led(params, vars, + ELINK_LED_MODE_OPER, ELINK_SPEED_10000); + } else { + rc = elink_emac_program(params, vars); + elink_emac_enable(params, vars, 0); + + /* AN complete? */ + if ((vars->link_status & + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) + && (!(vars->phy_flags & PHY_SGMII_FLAG)) && + ELINK_SINGLE_MEDIA_DIRECT(params)) + elink_set_gmii_tx_driver(params); + } + } + + /* PBF - link up */ + if (CHIP_IS_E1x(sc)) + rc |= elink_pbf_update(params, vars->flow_ctrl, + vars->line_speed); + + /* Disable drain */ + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + port * 4, 0); + + /* Update shared memory */ + elink_update_mng(params, vars->link_status); + elink_update_mng_eee(params, vars->eee_status); + /* Check remote fault */ + for (phy_idx = ELINK_INT_PHY; phy_idx < ELINK_MAX_PHYS; phy_idx++) { + if (params->phy[phy_idx].flags & ELINK_FLAGS_TX_ERROR_CHECK) { + elink_check_half_open_conn(params, vars, 0); + break; + } + } + DELAY(1000 * 20); + return rc; +} + +/* The elink_link_update function should be called upon link + * interrupt. + * Link is considered up as follows: + * - DIRECT_SINGLE_MEDIA - Only XGXS link (internal link) needs + * to be up + * - SINGLE_MEDIA - The link between the 577xx and the external + * phy (XGXS) need to up as well as the external link of the + * phy (PHY_EXT1) + * - DUAL_MEDIA - The link between the 577xx and the first + * external phy needs to be up, and at least one of the 2 + * external phy link must be up. + */ +elink_status_t elink_link_update(struct elink_params * params, + struct elink_vars * vars) +{ + struct bnx2x_softc *sc = params->sc; + struct elink_vars phy_vars[ELINK_MAX_PHYS]; + uint8_t port = params->port; + uint8_t link_10g_plus, phy_index; + uint8_t ext_phy_link_up = 0, cur_link_up; + elink_status_t rc = ELINK_STATUS_OK; + __rte_unused uint8_t is_mi_int = 0; + uint16_t ext_phy_line_speed = 0, prev_line_speed = vars->line_speed; + uint8_t active_external_phy = ELINK_INT_PHY; + vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG; + vars->link_status &= ~ELINK_LINK_UPDATE_MASK; + for (phy_index = ELINK_INT_PHY; phy_index < params->num_phys; + phy_index++) { + phy_vars[phy_index].flow_ctrl = 0; + phy_vars[phy_index].link_status = ETH_LINK_DOWN; + phy_vars[phy_index].line_speed = 0; + phy_vars[phy_index].duplex = DUPLEX_FULL; + phy_vars[phy_index].phy_link_up = 0; + phy_vars[phy_index].link_up = 0; + phy_vars[phy_index].fault_detected = 0; + /* different consideration, since vars holds inner state */ + phy_vars[phy_index].eee_status = vars->eee_status; + } + + if (USES_WARPCORE(sc)) + elink_set_aer_mmd(params, ¶ms->phy[ELINK_INT_PHY]); + + PMD_DRV_LOG(DEBUG, "port %x, XGXS?%x, int_status 0x%x", + port, (vars->phy_flags & PHY_XGXS_FLAG), + REG_RD(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4)); + + is_mi_int = (uint8_t) (REG_RD(sc, NIG_REG_EMAC0_STATUS_MISC_MI_INT + + port * 0x18) > 0); + PMD_DRV_LOG(DEBUG, "int_mask 0x%x MI_INT %x, SERDES_LINK %x", + REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4), + is_mi_int, + REG_RD(sc, + NIG_REG_SERDES0_STATUS_LINK_STATUS + port * 0x3c)); + + PMD_DRV_LOG(DEBUG, " 10G %x, XGXS_LINK %x", + REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK10G + port * 0x68), + REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK_STATUS + port * 0x68)); + + /* Disable emac */ + if (!CHIP_IS_E3(sc)) + REG_WR(sc, NIG_REG_NIG_EMAC0_EN + port * 4, 0); + + /* Step 1: + * Check external link change only for external phys, and apply + * priority selection between them in case the link on both phys + * is up. Note that instead of the common vars, a temporary + * vars argument is used since each phy may have different link/ + * speed/duplex result + */ + for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + struct elink_phy *phy = ¶ms->phy[phy_index]; + if (!phy->read_status) + continue; + /* Read link status and params of this ext phy */ + cur_link_up = phy->read_status(phy, params, + &phy_vars[phy_index]); + if (cur_link_up) { + PMD_DRV_LOG(DEBUG, "phy in index %d link is up", + phy_index); + } else { + PMD_DRV_LOG(DEBUG, "phy in index %d link is down", + phy_index); + continue; + } + + if (!ext_phy_link_up) { + ext_phy_link_up = 1; + active_external_phy = phy_index; + } else { + switch (elink_phy_selection(params)) { + case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT: + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY: + /* In this option, the first PHY makes sure to pass the + * traffic through itself only. + * Its not clear how to reset the link on the second phy + */ + active_external_phy = ELINK_EXT_PHY1; + break; + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY: + /* In this option, the first PHY makes sure to pass the + * traffic through the second PHY. + */ + active_external_phy = ELINK_EXT_PHY2; + break; + default: + /* Link indication on both PHYs with the following cases + * is invalid: + * - FIRST_PHY means that second phy wasn't initialized, + * hence its link is expected to be down + * - SECOND_PHY means that first phy should not be able + * to link up by itself (using configuration) + * - DEFAULT should be overriden during initialiazation + */ + PMD_DRV_LOG(DEBUG, "Invalid link indication" + "mpc=0x%x. DISABLING LINK !!!", + params->multi_phy_config); + ext_phy_link_up = 0; + break; + } + } + } + prev_line_speed = vars->line_speed; + /* Step 2: + * Read the status of the internal phy. In case of + * DIRECT_SINGLE_MEDIA board, this link is the external link, + * otherwise this is the link between the 577xx and the first + * external phy + */ + if (params->phy[ELINK_INT_PHY].read_status) + params->phy[ELINK_INT_PHY].read_status(¶ms-> + phy[ELINK_INT_PHY], + params, vars); + /* The INT_PHY flow control reside in the vars. This include the + * case where the speed or flow control are not set to AUTO. + * Otherwise, the active external phy flow control result is set + * to the vars. The ext_phy_line_speed is needed to check if the + * speed is different between the internal phy and external phy. + * This case may be result of intermediate link speed change. + */ + if (active_external_phy > ELINK_INT_PHY) { + vars->flow_ctrl = phy_vars[active_external_phy].flow_ctrl; + /* Link speed is taken from the XGXS. AN and FC result from + * the external phy. + */ + vars->link_status |= phy_vars[active_external_phy].link_status; + + /* if active_external_phy is first PHY and link is up - disable + * disable TX on second external PHY + */ + if (active_external_phy == ELINK_EXT_PHY1) { + if (params->phy[ELINK_EXT_PHY2].phy_specific_func) { + PMD_DRV_LOG(DEBUG, "Disabling TX on EXT_PHY2"); + params->phy[ELINK_EXT_PHY2]. + phy_specific_func(¶ms-> + phy[ELINK_EXT_PHY2], + params, ELINK_DISABLE_TX); + } + } + + ext_phy_line_speed = phy_vars[active_external_phy].line_speed; + vars->duplex = phy_vars[active_external_phy].duplex; + if (params->phy[active_external_phy].supported & + ELINK_SUPPORTED_FIBRE) + vars->link_status |= LINK_STATUS_SERDES_LINK; + else + vars->link_status &= ~LINK_STATUS_SERDES_LINK; + + vars->eee_status = phy_vars[active_external_phy].eee_status; + + PMD_DRV_LOG(DEBUG, "Active external phy selected: %x", + active_external_phy); + } + + for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + if (params->phy[phy_index].flags & + ELINK_FLAGS_REARM_LATCH_SIGNAL) { + elink_rearm_latch_signal(sc, port, + phy_index == + active_external_phy); + break; + } + } + PMD_DRV_LOG(DEBUG, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x," + " ext_phy_line_speed = %d", vars->flow_ctrl, + vars->link_status, ext_phy_line_speed); + /* Upon link speed change set the NIG into drain mode. Comes to + * deals with possible FIFO glitch due to clk change when speed + * is decreased without link down indicator + */ + + if (vars->phy_link_up) { + if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) && ext_phy_link_up && + (ext_phy_line_speed != vars->line_speed)) { + PMD_DRV_LOG(DEBUG, "Internal link speed %d is" + " different than the external" + " link speed %d", vars->line_speed, + ext_phy_line_speed); + vars->phy_link_up = 0; + } else if (prev_line_speed != vars->line_speed) { + REG_WR(sc, + NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, + 0); + DELAY(1000 * 1); + } + } + + /* Anything 10 and over uses the bmac */ + link_10g_plus = (vars->line_speed >= ELINK_SPEED_10000); + + elink_link_int_ack(params, vars, link_10g_plus); + + /* In case external phy link is up, and internal link is down + * (not initialized yet probably after link initialization, it + * needs to be initialized. + * Note that after link down-up as result of cable plug, the xgxs + * link would probably become up again without the need + * initialize it + */ + if (!(ELINK_SINGLE_MEDIA_DIRECT(params))) { + PMD_DRV_LOG(DEBUG, "ext_phy_link_up = %d, int_link_up = %d," + " init_preceding = %d", ext_phy_link_up, + vars->phy_link_up, + params->phy[ELINK_EXT_PHY1].flags & + ELINK_FLAGS_INIT_XGXS_FIRST); + if (!(params->phy[ELINK_EXT_PHY1].flags & + ELINK_FLAGS_INIT_XGXS_FIRST) + && ext_phy_link_up && !vars->phy_link_up) { + vars->line_speed = ext_phy_line_speed; + if (vars->line_speed < ELINK_SPEED_1000) + vars->phy_flags |= PHY_SGMII_FLAG; + else + vars->phy_flags &= ~PHY_SGMII_FLAG; + + if (params->phy[ELINK_INT_PHY].config_init) + params->phy[ELINK_INT_PHY].config_init(¶ms-> + phy + [ELINK_INT_PHY], + params, + vars); + } + } + /* Link is up only if both local phy and external phy (in case of + * non-direct board) are up and no fault detected on active PHY. + */ + vars->link_up = (vars->phy_link_up && + (ext_phy_link_up || + ELINK_SINGLE_MEDIA_DIRECT(params)) && + (phy_vars[active_external_phy].fault_detected == 0)); + + /* Update the PFC configuration in case it was changed */ + if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) + vars->link_status |= LINK_STATUS_PFC_ENABLED; + else + vars->link_status &= ~LINK_STATUS_PFC_ENABLED; + + if (vars->link_up) + rc = elink_update_link_up(params, vars, link_10g_plus); + else + rc = elink_update_link_down(params, vars); + + /* Update MCP link status was changed */ + if (params-> + feature_config_flags & ELINK_FEATURE_CONFIG_BC_SUPPORTS_AFEX) + elink_cb_fw_command(sc, DRV_MSG_CODE_LINK_STATUS_CHANGED, 0); + + return rc; +} + +/*****************************************************************************/ +/* External Phy section */ +/*****************************************************************************/ +static void elink_ext_phy_hw_reset(struct bnx2x_softc *sc, uint8_t port) +{ + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, port); + DELAY(1000 * 1); + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); +} + +static void elink_save_spirom_version(struct bnx2x_softc *sc, + __rte_unused uint8_t port, + uint32_t spirom_ver, uint32_t ver_addr) +{ + PMD_DRV_LOG(DEBUG, "FW version 0x%x:0x%x for port %d", + (uint16_t) (spirom_ver >> 16), (uint16_t) spirom_ver, port); + + if (ver_addr) + REG_WR(sc, ver_addr, spirom_ver); +} + +static void elink_save_bnx2x_spirom_ver(struct bnx2x_softc *sc, + struct elink_phy *phy, uint8_t port) +{ + uint16_t fw_ver1, fw_ver2; + + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER1, &fw_ver1); + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, &fw_ver2); + elink_save_spirom_version(sc, port, + (uint32_t) (fw_ver1 << 16 | fw_ver2), + phy->ver_addr); +} + +static void elink_ext_phy_10G_an_resolve(struct bnx2x_softc *sc, + struct elink_phy *phy, + struct elink_vars *vars) +{ + uint16_t val; + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_STATUS, &val); + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_STATUS, &val); + if (val & (1 << 5)) + vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + if ((val & (1 << 0)) == 0) + vars->link_status |= LINK_STATUS_PARALLEL_DETECTION_USED; +} + +/******************************************************************/ +/* common BNX2X8073/BNX2X8727 PHY SECTION */ +/******************************************************************/ +static void elink_8073_resolve_fc(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + if (phy->req_line_speed == ELINK_SPEED_10 || + phy->req_line_speed == ELINK_SPEED_100) { + vars->flow_ctrl = phy->req_flow_ctrl; + return; + } + + if (elink_ext_phy_resolve_fc(phy, params, vars) && + (vars->flow_ctrl == ELINK_FLOW_CTRL_NONE)) { + uint16_t pause_result; + uint16_t ld_pause; /* local */ + uint16_t lp_pause; /* link partner */ + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LD, &ld_pause); + + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LP, &lp_pause); + pause_result = (ld_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 5; + pause_result |= (lp_pause & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7; + + elink_pause_resolve(vars, pause_result); + PMD_DRV_LOG(DEBUG, "Ext PHY CL37 pause result 0x%x", + pause_result); + } +} + +static elink_status_t elink_8073_8727_external_rom_boot(struct bnx2x_softc *sc, + struct elink_phy *phy, + uint8_t port) +{ + uint32_t count = 0; + uint16_t fw_ver1, fw_msgout; + elink_status_t rc = ELINK_STATUS_OK; + + /* Boot port from external ROM */ + /* EDC grst */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001); + + /* Ucode reboot and rst */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x008c); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0001); + + /* Reset internal microprocessor */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); + + /* Release srst bit */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); + + /* Delay 100ms per the PHY specifications */ + DELAY(1000 * 100); + + /* 8073 sometimes taking longer to download */ + do { + count++; + if (count > 300) { + PMD_DRV_LOG(DEBUG, + "elink_8073_8727_external_rom_boot port %x:" + "Download failed. fw version = 0x%x", + port, fw_ver1); + rc = ELINK_STATUS_ERROR; + break; + } + + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER1, &fw_ver1); + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_M8051_MSGOUT_REG, &fw_msgout); + + DELAY(1000 * 1); + } while (fw_ver1 == 0 || fw_ver1 == 0x4321 || + ((fw_msgout & 0xff) != 0x03 && (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8073))); + + /* Clear ser_boot_ctl bit */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0000); + elink_save_bnx2x_spirom_ver(sc, phy, port); + + PMD_DRV_LOG(DEBUG, + "elink_8073_8727_external_rom_boot port %x:" + "Download complete. fw version = 0x%x", port, fw_ver1); + + return rc; +} + +/******************************************************************/ +/* BNX2X8073 PHY SECTION */ +/******************************************************************/ +static elink_status_t elink_8073_is_snr_needed(struct bnx2x_softc *sc, + struct elink_phy *phy) +{ + /* This is only required for 8073A1, version 102 only */ + uint16_t val; + + /* Read 8073 HW revision */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &val); + + if (val != 1) { + /* No need to workaround in 8073 A1 */ + return ELINK_STATUS_OK; + } + + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER2, &val); + + /* SNR should be applied only for version 0x102 */ + if (val != 0x102) + return ELINK_STATUS_OK; + + return 1; +} + +static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc, + struct elink_phy *phy) +{ + uint16_t val, cnt, cnt1; + + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &val); + + if (val > 0) { + /* No need to workaround in 8073 A1 */ + return ELINK_STATUS_OK; + } + /* XAUI workaround in 8073 A0: */ + + /* After loading the boot ROM and restarting Autoneg, poll + * Dev1, Reg $C820: + */ + + for (cnt = 0; cnt < 1000; cnt++) { + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_SPEED_LINK_STATUS, &val); + /* If bit [14] = 0 or bit [13] = 0, continue on with + * system initialization (XAUI work-around not required, as + * these bits indicate 2.5G or 1G link up). + */ + if (!(val & (1 << 14)) || !(val & (1 << 13))) { + PMD_DRV_LOG(DEBUG, "XAUI work-around not required"); + return ELINK_STATUS_OK; + } else if (!(val & (1 << 15))) { + PMD_DRV_LOG(DEBUG, "bit 15 went off"); + /* If bit 15 is 0, then poll Dev1, Reg $C841 until it's + * MSB (bit15) goes to 1 (indicating that the XAUI + * workaround has completed), then continue on with + * system initialization. + */ + for (cnt1 = 0; cnt1 < 1000; cnt1++) { + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_XAUI_WA, + &val); + if (val & (1 << 15)) { + PMD_DRV_LOG(DEBUG, + "XAUI workaround has completed"); + return ELINK_STATUS_OK; + } + DELAY(1000 * 3); + } + break; + } + DELAY(1000 * 3); + } + PMD_DRV_LOG(DEBUG, "Warning: XAUI work-around timeout !!!"); + return ELINK_STATUS_ERROR; +} + +static void elink_807x_force_10G(struct bnx2x_softc *sc, struct elink_phy *phy) +{ + /* Force KR or KX */ + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0x000b); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_BNX2X_CTRL, 0x0000); + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000); +} + +static void elink_8073_set_pause_cl37(struct elink_params *params, + struct elink_phy *phy, + struct elink_vars *vars) +{ + uint16_t cl37_val; + struct bnx2x_softc *sc = params->sc; + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, &cl37_val); + + cl37_val &= ~MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + elink_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC) { + cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC; + } + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) { + cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; + } + if ((vars->ieee_fc & + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { + cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; + } + PMD_DRV_LOG(DEBUG, "Ext phy AN advertize cl37 0x%x", cl37_val); + + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, cl37_val); + DELAY(1000 * 500); +} + +static void elink_8073_specific_func(struct elink_phy *phy, + struct elink_params *params, + uint32_t action) +{ + struct bnx2x_softc *sc = params->sc; + switch (action) { + case ELINK_PHY_INIT: + /* Enable LASI */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, + (1 << 2)); + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, + 0x0004); + break; + } +} + +static elink_status_t elink_8073_config_init(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val = 0, tmp1; + uint8_t gpio_port; + PMD_DRV_LOG(DEBUG, "Init 8073"); + + if (CHIP_IS_E2(sc)) + gpio_port = SC_PATH(sc); + else + gpio_port = params->port; + /* Restore normal power mode */ + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port); + + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, gpio_port); + + elink_8073_specific_func(phy, params, ELINK_PHY_INIT); + elink_8073_set_pause_cl37(params, phy, vars); + + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); + + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1); + + PMD_DRV_LOG(DEBUG, "Before rom RX_ALARM(port1): 0x%x", tmp1); + + /* Swap polarity if required - Must be done only in non-1G mode */ + if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) { + /* Configure the 8073 to swap _P and _N of the KR lines */ + PMD_DRV_LOG(DEBUG, "Swapping polarity for the 8073"); + /* 10G Rx/Tx and 1G Tx signal polarity swap */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL, &val); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL, + (val | (3 << 9))); + } + + /* Enable CL37 BAM */ + if (REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port]. + default_cfg)) & + PORT_HW_CFG_ENABLE_BAM_ON_KR_ENABLED) { + + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8073_BAM, &val); + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8073_BAM, val | 1); + PMD_DRV_LOG(DEBUG, "Enable CL37 BAM on KR"); + } + if (params->loopback_mode == ELINK_LOOPBACK_EXT) { + elink_807x_force_10G(sc, phy); + PMD_DRV_LOG(DEBUG, "Forced speed 10G on 807X"); + return ELINK_STATUS_OK; + } else { + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_BNX2X_CTRL, 0x0002); + } + if (phy->req_line_speed != ELINK_SPEED_AUTO_NEG) { + if (phy->req_line_speed == ELINK_SPEED_10000) { + val = (1 << 7); + } else if (phy->req_line_speed == ELINK_SPEED_2500) { + val = (1 << 5); + /* Note that 2.5G works only when used with 1G + * advertisement + */ + } else + val = (1 << 5); + } else { + val = 0; + if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) + val |= (1 << 7); + + /* Note that 2.5G works only when used with 1G advertisement */ + if (phy->speed_cap_mask & + (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G | + PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) + val |= (1 << 5); + PMD_DRV_LOG(DEBUG, "807x autoneg val = 0x%x", val); + } + + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, val); + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_2_5G, &tmp1); + + if (((phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G) && + (phy->req_line_speed == ELINK_SPEED_AUTO_NEG)) || + (phy->req_line_speed == ELINK_SPEED_2500)) { + uint16_t phy_ver; + /* Allow 2.5G for A1 and above */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, + &phy_ver); + PMD_DRV_LOG(DEBUG, "Add 2.5G"); + if (phy_ver > 0) + tmp1 |= 1; + else + tmp1 &= 0xfffe; + } else { + PMD_DRV_LOG(DEBUG, "Disable 2.5G"); + tmp1 &= 0xfffe; + } + + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_2_5G, tmp1); + /* Add support for CL37 (passive mode) II */ + + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, &tmp1); + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, + (tmp1 | ((phy->req_duplex == DUPLEX_FULL) ? + 0x20 : 0x40))); + + /* Add support for CL37 (passive mode) III */ + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000); + + /* The SNR will improve about 2db by changing BW and FEE main + * tap. Rest commands are executed after link is up + * Change FFE main cursor to 5 in EDC register + */ + if (elink_8073_is_snr_needed(sc, phy)) + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_EDC_FFE_MAIN, + 0xFB0C); + + /* Enable FEC (Forware Error Correction) Request in the AN */ + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV2, &tmp1); + tmp1 |= (1 << 15); + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV2, tmp1); + + elink_ext_phy_set_pause(params, phy, vars); + + /* Restart autoneg */ + DELAY(1000 * 500); + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); + PMD_DRV_LOG(DEBUG, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x", + ((val & (1 << 5)) > 0), ((val & (1 << 7)) > 0)); + return ELINK_STATUS_OK; +} + +static uint8_t elink_8073_read_status(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t link_up = 0; + uint16_t val1, val2; + uint16_t link_status = 0; + uint16_t an1000_status = 0; + + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); + + PMD_DRV_LOG(DEBUG, "8703 LASI status 0x%x", val1); + + /* Clear the interrupt LASI status register */ + elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2); + elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val1); + PMD_DRV_LOG(DEBUG, "807x PCS status 0x%x->0x%x", val2, val1); + /* Clear MSG-OUT */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1); + + /* Check the LASI */ + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2); + + PMD_DRV_LOG(DEBUG, "KR 0x9003 0x%x", val2); + + /* Check the link status */ + elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2); + PMD_DRV_LOG(DEBUG, "KR PCS status 0x%x", val2); + + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); + link_up = ((val1 & 4) == 4); + PMD_DRV_LOG(DEBUG, "PMA_REG_STATUS=0x%x", val1); + + if (link_up && ((phy->req_line_speed != ELINK_SPEED_10000))) { + if (elink_8073_xaui_wa(sc, phy) != 0) + return 0; + } + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status); + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &an1000_status); + + /* Check the link status on 1.1.2 */ + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); + PMD_DRV_LOG(DEBUG, "KR PMA status 0x%x->0x%x," + "an_link_status=0x%x", val2, val1, an1000_status); + + link_up = (((val1 & 4) == 4) || (an1000_status & (1 << 1))); + if (link_up && elink_8073_is_snr_needed(sc, phy)) { + /* The SNR will improve about 2dbby changing the BW and FEE main + * tap. The 1st write to change FFE main tap is set before + * restart AN. Change PLL Bandwidth in EDC register + */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PLL_BANDWIDTH, + 0x26BC); + + /* Change CDR Bandwidth in EDC register */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CDR_BANDWIDTH, + 0x0333); + } + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_SPEED_LINK_STATUS, + &link_status); + + /* Bits 0..2 --> speed detected, bits 13..15--> link is down */ + if ((link_status & (1 << 2)) && (!(link_status & (1 << 15)))) { + link_up = 1; + vars->line_speed = ELINK_SPEED_10000; + PMD_DRV_LOG(DEBUG, "port %x: External link up in 10G", + params->port); + } else if ((link_status & (1 << 1)) && (!(link_status & (1 << 14)))) { + link_up = 1; + vars->line_speed = ELINK_SPEED_2500; + PMD_DRV_LOG(DEBUG, "port %x: External link up in 2.5G", + params->port); + } else if ((link_status & (1 << 0)) && (!(link_status & (1 << 13)))) { + link_up = 1; + vars->line_speed = ELINK_SPEED_1000; + PMD_DRV_LOG(DEBUG, "port %x: External link up in 1G", + params->port); + } else { + link_up = 0; + PMD_DRV_LOG(DEBUG, "port %x: External link is down", + params->port); + } + + if (link_up) { + /* Swap polarity if required */ + if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) { + /* Configure the 8073 to swap P and N of the KR lines */ + elink_cl45_read(sc, phy, + MDIO_XS_DEVAD, + MDIO_XS_REG_8073_RX_CTRL_PCIE, &val1); + /* Set bit 3 to invert Rx in 1G mode and clear this bit + * when it`s in 10G mode. + */ + if (vars->line_speed == ELINK_SPEED_1000) { + PMD_DRV_LOG(DEBUG, "Swapping 1G polarity for" + "the 8073"); + val1 |= (1 << 3); + } else + val1 &= ~(1 << 3); + + elink_cl45_write(sc, phy, + MDIO_XS_DEVAD, + MDIO_XS_REG_8073_RX_CTRL_PCIE, val1); + } + elink_ext_phy_10G_an_resolve(sc, phy, vars); + elink_8073_resolve_fc(phy, params, vars); + vars->duplex = DUPLEX_FULL; + } + + if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) { + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG2, &val1); + + if (val1 & (1 << 5)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE; + if (val1 & (1 << 7)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + } + + return link_up; +} + +static void elink_8073_link_reset(__rte_unused struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t gpio_port; + if (CHIP_IS_E2(sc)) + gpio_port = SC_PATH(sc); + else + gpio_port = params->port; + PMD_DRV_LOG(DEBUG, "Setting 8073 port %d into low power mode", + gpio_port); + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port); +} + +/******************************************************************/ +/* BNX2X8705 PHY SECTION */ +/******************************************************************/ +static elink_status_t elink_8705_config_init(struct elink_phy *phy, + struct elink_params *params, + __rte_unused struct elink_vars + *vars) +{ + struct bnx2x_softc *sc = params->sc; + PMD_DRV_LOG(DEBUG, "init 8705"); + /* Restore normal power mode */ + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); + /* HW reset */ + elink_ext_phy_hw_reset(sc, params->port); + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040); + elink_wait_reset_complete(sc, phy, params); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL, 0x8288); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, 0x7fbf); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CMU_PLL_BYPASS, 0x0100); + elink_cl45_write(sc, phy, MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_CNTL, 0x1); + /* BNX2X8705 doesn't have microcode, hence the 0 */ + elink_save_spirom_version(sc, params->port, params->shmem_base, 0); + return ELINK_STATUS_OK; +} + +static uint8_t elink_8705_read_status(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + uint8_t link_up = 0; + uint16_t val1, rx_sd; + struct bnx2x_softc *sc = params->sc; + PMD_DRV_LOG(DEBUG, "read status 8705"); + elink_cl45_read(sc, phy, + MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1); + PMD_DRV_LOG(DEBUG, "8705 LASI status 0x%x", val1); + + elink_cl45_read(sc, phy, + MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1); + PMD_DRV_LOG(DEBUG, "8705 LASI status 0x%x", val1); + + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); + + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xc809, &val1); + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xc809, &val1); + + PMD_DRV_LOG(DEBUG, "8705 1.c809 val=0x%x", val1); + link_up = ((rx_sd & 0x1) && (val1 & (1 << 9)) + && ((val1 & (1 << 8)) == 0)); + if (link_up) { + vars->line_speed = ELINK_SPEED_10000; + elink_ext_phy_resolve_fc(phy, params, vars); + } + return link_up; +} + +/******************************************************************/ +/* SFP+ module Section */ +/******************************************************************/ +static void elink_set_disable_pmd_transmit(struct elink_params *params, + struct elink_phy *phy, + uint8_t pmd_dis) +{ + struct bnx2x_softc *sc = params->sc; + /* Disable transmitter only for bootcodes which can enable it afterwards + * (for D3 link) + */ + if (pmd_dis) { + if (params->feature_config_flags & + ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED) { + PMD_DRV_LOG(DEBUG, "Disabling PMD transmitter"); + } else { + PMD_DRV_LOG(DEBUG, "NOT disabling PMD transmitter"); + return; + } + } else { + PMD_DRV_LOG(DEBUG, "Enabling PMD transmitter"); + } + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_TX_DISABLE, pmd_dis); +} + +static uint8_t elink_get_gpio_port(struct elink_params *params) +{ + uint8_t gpio_port; + uint32_t swap_val, swap_override; + struct bnx2x_softc *sc = params->sc; + if (CHIP_IS_E2(sc)) { + gpio_port = SC_PATH(sc); + } else { + gpio_port = params->port; + } + swap_val = REG_RD(sc, NIG_REG_PORT_SWAP); + swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE); + return gpio_port ^ (swap_val && swap_override); +} + +static void elink_sfp_e1e2_set_transmitter(struct elink_params *params, + struct elink_phy *phy, uint8_t tx_en) +{ + uint16_t val; + uint8_t port = params->port; + struct bnx2x_softc *sc = params->sc; + uint32_t tx_en_mode; + + /* Disable/Enable transmitter ( TX laser of the SFP+ module.) */ + tx_en_mode = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].sfp_ctrl)) & + PORT_HW_CFG_TX_LASER_MASK; + PMD_DRV_LOG(DEBUG, "Setting transmitter tx_en=%x for port %x " + "mode = %x", tx_en, port, tx_en_mode); + switch (tx_en_mode) { + case PORT_HW_CFG_TX_LASER_MDIO: + + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, &val); + + if (tx_en) + val &= ~(1 << 15); + else + val |= (1 << 15); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, val); + break; + case PORT_HW_CFG_TX_LASER_GPIO0: + case PORT_HW_CFG_TX_LASER_GPIO1: + case PORT_HW_CFG_TX_LASER_GPIO2: + case PORT_HW_CFG_TX_LASER_GPIO3: + { + uint16_t gpio_pin; + uint8_t gpio_port, gpio_mode; + if (tx_en) + gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_HIGH; + else + gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_LOW; + + gpio_pin = tx_en_mode - PORT_HW_CFG_TX_LASER_GPIO0; + gpio_port = elink_get_gpio_port(params); + elink_cb_gpio_write(sc, gpio_pin, gpio_mode, gpio_port); + break; + } + default: + PMD_DRV_LOG(DEBUG, "Invalid TX_LASER_MDIO 0x%x", tx_en_mode); + break; + } +} + +static void elink_sfp_set_transmitter(struct elink_params *params, + struct elink_phy *phy, uint8_t tx_en) +{ + struct bnx2x_softc *sc = params->sc; + PMD_DRV_LOG(DEBUG, "Setting SFP+ transmitter to %d", tx_en); + if (CHIP_IS_E3(sc)) + elink_sfp_e3_set_transmitter(params, phy, tx_en); + else + elink_sfp_e1e2_set_transmitter(params, phy, tx_en); +} + +static elink_status_t elink_8726_read_sfp_module_eeprom(struct elink_phy *phy, + struct elink_params + *params, + uint8_t dev_addr, + uint16_t addr, + uint8_t byte_cnt, + uint8_t * o_buf, + __rte_unused uint8_t + is_init) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val = 0; + uint16_t i; + if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) { + PMD_DRV_LOG(DEBUG, "Reading from eeprom is limited to 0xf"); + return ELINK_STATUS_ERROR; + } + /* Set the read command byte count */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT, + (byte_cnt | (dev_addr << 8))); + + /* Set the read command address */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR, + addr); + + /* Activate read command */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, + 0x2c0f); + + /* Wait up to 500us for command complete status */ + for (i = 0; i < 100; i++) { + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) + break; + DELAY(5); + } + + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) != + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) { + PMD_DRV_LOG(DEBUG, + "Got bad status 0x%x when reading from SFP+ EEPROM", + (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK)); + return ELINK_STATUS_ERROR; + } + + /* Read the buffer */ + for (i = 0; i < byte_cnt; i++) { + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF + i, &val); + o_buf[i] = + (uint8_t) (val & MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK); + } + + for (i = 0; i < 100; i++) { + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE) + return ELINK_STATUS_OK; + DELAY(1000 * 1); + } + return ELINK_STATUS_ERROR; +} + +static void elink_warpcore_power_module(struct elink_params *params, + uint8_t power) +{ + uint32_t pin_cfg; + struct bnx2x_softc *sc = params->sc; + + pin_cfg = (REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port]. + e3_sfp_ctrl)) & PORT_HW_CFG_E3_PWR_DIS_MASK) + >> PORT_HW_CFG_E3_PWR_DIS_SHIFT; + + if (pin_cfg == PIN_CFG_NA) + return; + PMD_DRV_LOG(DEBUG, "Setting SFP+ module power to %d using pin cfg %d", + power, pin_cfg); + /* Low ==> corresponding SFP+ module is powered + * high ==> the SFP+ module is powered down + */ + elink_set_cfg_pin(sc, pin_cfg, power ^ 1); +} + +static elink_status_t elink_warpcore_read_sfp_module_eeprom(__rte_unused struct + elink_phy *phy, + struct elink_params + *params, + uint8_t dev_addr, + uint16_t addr, + uint8_t byte_cnt, + uint8_t * o_buf, + uint8_t is_init) +{ + elink_status_t rc = ELINK_STATUS_OK; + uint8_t i, j = 0, cnt = 0; + uint32_t data_array[4]; + uint16_t addr32; + struct bnx2x_softc *sc = params->sc; + + if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) { + PMD_DRV_LOG(DEBUG, + "Reading from eeprom is limited to 16 bytes"); + return ELINK_STATUS_ERROR; + } + + /* 4 byte aligned address */ + addr32 = addr & (~0x3); + do { + if ((!is_init) && (cnt == I2C_WA_PWR_ITER)) { + elink_warpcore_power_module(params, 0); + /* Note that 100us are not enough here */ + DELAY(1000 * 1); + elink_warpcore_power_module(params, 1); + } + rc = elink_bsc_read(params, sc, dev_addr, addr32, 0, byte_cnt, + data_array); + } while ((rc != ELINK_STATUS_OK) && (++cnt < I2C_WA_RETRY_CNT)); + + if (rc == ELINK_STATUS_OK) { + for (i = (addr - addr32); i < byte_cnt + (addr - addr32); i++) { + o_buf[j] = *((uint8_t *) data_array + i); + j++; + } + } + + return rc; +} + +static elink_status_t elink_8727_read_sfp_module_eeprom(struct elink_phy *phy, + struct elink_params + *params, + uint8_t dev_addr, + uint16_t addr, + uint8_t byte_cnt, + uint8_t * o_buf, + __rte_unused uint8_t + is_init) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val, i; + + if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) { + PMD_DRV_LOG(DEBUG, "Reading from eeprom is limited to 0xf"); + return ELINK_STATUS_ERROR; + } + + /* Set 2-wire transfer rate of SFP+ module EEPROM + * to 100Khz since some DACs(direct attached cables) do + * not work at 400Khz. + */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR, + ((dev_addr << 8) | 1)); + + /* Need to read from 1.8000 to clear it */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + + /* Set the read command byte count */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT, + ((byte_cnt < 2) ? 2 : byte_cnt)); + + /* Set the read command address */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR, addr); + /* Set the destination address */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + 0x8004, MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF); + + /* Activate read command */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, 0x8002); + /* Wait appropriate time for two-wire command to finish before + * polling the status register + */ + DELAY(1000 * 1); + + /* Wait up to 500us for command complete status */ + for (i = 0; i < 100; i++) { + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) + break; + DELAY(5); + } + + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) != + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) { + PMD_DRV_LOG(DEBUG, + "Got bad status 0x%x when reading from SFP+ EEPROM", + (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK)); + return ELINK_STATUS_TIMEOUT; + } + + /* Read the buffer */ + for (i = 0; i < byte_cnt; i++) { + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF + i, &val); + o_buf[i] = + (uint8_t) (val & MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK); + } + + for (i = 0; i < 100; i++) { + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val); + if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) == + MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE) + return ELINK_STATUS_OK; + DELAY(1000 * 1); + } + + return ELINK_STATUS_ERROR; +} + +static elink_status_t elink_read_sfp_module_eeprom(struct elink_phy *phy, + struct elink_params *params, + uint8_t dev_addr, + uint16_t addr, + uint16_t byte_cnt, + uint8_t * o_buf) +{ + elink_status_t rc = 0; + uint8_t xfer_size; + uint8_t *user_data = o_buf; + read_sfp_module_eeprom_func_p read_func; + + if ((dev_addr != 0xa0) && (dev_addr != 0xa2)) { + PMD_DRV_LOG(DEBUG, "invalid dev_addr 0x%x", dev_addr); + return ELINK_STATUS_ERROR; + } + + switch (phy->type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726: + read_func = elink_8726_read_sfp_module_eeprom; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722: + read_func = elink_8727_read_sfp_module_eeprom; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: + read_func = elink_warpcore_read_sfp_module_eeprom; + break; + default: + return ELINK_OP_NOT_SUPPORTED; + } + + while (!rc && (byte_cnt > 0)) { + xfer_size = (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) ? + ELINK_SFP_EEPROM_PAGE_SIZE : byte_cnt; + rc = read_func(phy, params, dev_addr, addr, xfer_size, + user_data, 0); + byte_cnt -= xfer_size; + user_data += xfer_size; + addr += xfer_size; + } + return rc; +} + +static elink_status_t elink_get_edc_mode(struct elink_phy *phy, + struct elink_params *params, + uint16_t * edc_mode) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t sync_offset = 0, phy_idx, media_types; + uint8_t gport, val[2], check_limiting_mode = 0; + *edc_mode = ELINK_EDC_MODE_LIMITING; + phy->media_type = ELINK_ETH_PHY_UNSPECIFIED; + /* First check for copper cable */ + if (elink_read_sfp_module_eeprom(phy, + params, + ELINK_I2C_DEV_ADDR_A0, + ELINK_SFP_EEPROM_CON_TYPE_ADDR, + 2, (uint8_t *) val) != 0) { + PMD_DRV_LOG(DEBUG, "Failed to read from SFP+ module EEPROM"); + return ELINK_STATUS_ERROR; + } + + switch (val[0]) { + case ELINK_SFP_EEPROM_CON_TYPE_VAL_COPPER: + { + uint8_t copper_module_type; + phy->media_type = ELINK_ETH_PHY_DA_TWINAX; + /* Check if its active cable (includes SFP+ module) + * of passive cable + */ + if (elink_read_sfp_module_eeprom(phy, + params, + ELINK_I2C_DEV_ADDR_A0, + ELINK_SFP_EEPROM_FC_TX_TECH_ADDR, + 1, + &copper_module_type) != + 0) { + PMD_DRV_LOG(DEBUG, + "Failed to read copper-cable-type" + " from SFP+ EEPROM"); + return ELINK_STATUS_ERROR; + } + + if (copper_module_type & + ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) { + PMD_DRV_LOG(DEBUG, + "Active Copper cable detected"); + if (phy->type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + *edc_mode = ELINK_EDC_MODE_ACTIVE_DAC; + else + check_limiting_mode = 1; + } else if (copper_module_type & + ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) + { + PMD_DRV_LOG(DEBUG, + "Passive Copper cable detected"); + *edc_mode = ELINK_EDC_MODE_PASSIVE_DAC; + } else { + PMD_DRV_LOG(DEBUG, + "Unknown copper-cable-type 0x%x !!!", + copper_module_type); + return ELINK_STATUS_ERROR; + } + break; + } + case ELINK_SFP_EEPROM_CON_TYPE_VAL_LC: + case ELINK_SFP_EEPROM_CON_TYPE_VAL_RJ45: + check_limiting_mode = 1; + if ((val[1] & (ELINK_SFP_EEPROM_COMP_CODE_SR_MASK | + ELINK_SFP_EEPROM_COMP_CODE_LR_MASK | + ELINK_SFP_EEPROM_COMP_CODE_LRM_MASK)) == 0) { + PMD_DRV_LOG(DEBUG, "1G SFP module detected"); + gport = params->port; + phy->media_type = ELINK_ETH_PHY_SFP_1G_FIBER; + if (phy->req_line_speed != ELINK_SPEED_1000) { + phy->req_line_speed = ELINK_SPEED_1000; + if (!CHIP_IS_E1x(sc)) { + gport = SC_PATH(sc) + + (params->port << 1); + } + elink_cb_event_log(sc, ELINK_LOG_ID_NON_10G_MODULE, gport); //"Warning: Link speed was forced to 1000Mbps." + // " Current SFP module in port %d is not" + // " compliant with 10G Ethernet", + + } + } else { + int idx, cfg_idx = 0; + PMD_DRV_LOG(DEBUG, "10G Optic module detected"); + for (idx = ELINK_INT_PHY; idx < ELINK_MAX_PHYS; idx++) { + if (params->phy[idx].type == phy->type) { + cfg_idx = ELINK_LINK_CONFIG_IDX(idx); + break; + } + } + phy->media_type = ELINK_ETH_PHY_SFPP_10G_FIBER; + phy->req_line_speed = params->req_line_speed[cfg_idx]; + } + break; + default: + PMD_DRV_LOG(DEBUG, "Unable to determine module type 0x%x !!!", + val[0]); + return ELINK_STATUS_ERROR; + } + sync_offset = params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].media_type); + media_types = REG_RD(sc, sync_offset); + /* Update media type for non-PMF sync */ + for (phy_idx = ELINK_INT_PHY; phy_idx < ELINK_MAX_PHYS; phy_idx++) { + if (&(params->phy[phy_idx]) == phy) { + media_types &= ~(PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK << + (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * + phy_idx)); + media_types |= + ((phy-> + media_type & PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) << + (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * phy_idx)); + break; + } + } + REG_WR(sc, sync_offset, media_types); + if (check_limiting_mode) { + uint8_t options[ELINK_SFP_EEPROM_OPTIONS_SIZE]; + if (elink_read_sfp_module_eeprom(phy, + params, + ELINK_I2C_DEV_ADDR_A0, + ELINK_SFP_EEPROM_OPTIONS_ADDR, + ELINK_SFP_EEPROM_OPTIONS_SIZE, + options) != 0) { + PMD_DRV_LOG(DEBUG, + "Failed to read Option field from module EEPROM"); + return ELINK_STATUS_ERROR; + } + if ((options[0] & ELINK_SFP_EEPROM_OPTIONS_LINEAR_RX_OUT_MASK)) + *edc_mode = ELINK_EDC_MODE_LINEAR; + else + *edc_mode = ELINK_EDC_MODE_LIMITING; + } + PMD_DRV_LOG(DEBUG, "EDC mode is set to 0x%x", *edc_mode); + return ELINK_STATUS_OK; +} + +/* This function read the relevant field from the module (SFP+), and verify it + * is compliant with this board + */ +static elink_status_t elink_verify_sfp_module(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t val, cmd; + uint32_t fw_resp, fw_cmd_param; + char vendor_name[ELINK_SFP_EEPROM_VENDOR_NAME_SIZE + 1]; + char vendor_pn[ELINK_SFP_EEPROM_PART_NO_SIZE + 1]; + phy->flags &= ~ELINK_FLAGS_SFP_NOT_APPROVED; + val = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_feature_config[params->port]. + config)); + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT) { + PMD_DRV_LOG(DEBUG, "NOT enforcing module verification"); + return ELINK_STATUS_OK; + } + + if (params->feature_config_flags & + ELINK_FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY) { + /* Use specific phy request */ + cmd = DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL; + } else if (params->feature_config_flags & + ELINK_FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) { + /* Use first phy request only in case of non-dual media */ + if (ELINK_DUAL_MEDIA(params)) { + PMD_DRV_LOG(DEBUG, + "FW does not support OPT MDL verification"); + return ELINK_STATUS_ERROR; + } + cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL; + } else { + /* No support in OPT MDL detection */ + PMD_DRV_LOG(DEBUG, "FW does not support OPT MDL verification"); + return ELINK_STATUS_ERROR; + } + + fw_cmd_param = ELINK_FW_PARAM_SET(phy->addr, phy->type, phy->mdio_ctrl); + fw_resp = elink_cb_fw_command(sc, cmd, fw_cmd_param); + if (fw_resp == FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS) { + PMD_DRV_LOG(DEBUG, "Approved module"); + return ELINK_STATUS_OK; + } + + /* Format the warning message */ + if (elink_read_sfp_module_eeprom(phy, + params, + ELINK_I2C_DEV_ADDR_A0, + ELINK_SFP_EEPROM_VENDOR_NAME_ADDR, + ELINK_SFP_EEPROM_VENDOR_NAME_SIZE, + (uint8_t *) vendor_name)) + vendor_name[0] = '\0'; + else + vendor_name[ELINK_SFP_EEPROM_VENDOR_NAME_SIZE] = '\0'; + if (elink_read_sfp_module_eeprom(phy, + params, + ELINK_I2C_DEV_ADDR_A0, + ELINK_SFP_EEPROM_PART_NO_ADDR, + ELINK_SFP_EEPROM_PART_NO_SIZE, + (uint8_t *) vendor_pn)) + vendor_pn[0] = '\0'; + else + vendor_pn[ELINK_SFP_EEPROM_PART_NO_SIZE] = '\0'; + + elink_cb_event_log(sc, ELINK_LOG_ID_UNQUAL_IO_MODULE, params->port, vendor_name, vendor_pn); // "Warning: Unqualified SFP+ module detected," + // " Port %d from %s part number %s", + + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) != + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_WARNING_MSG) + phy->flags |= ELINK_FLAGS_SFP_NOT_APPROVED; + return ELINK_STATUS_ERROR; +} + +static elink_status_t elink_wait_for_sfp_module_initialized(struct elink_phy + *phy, + struct elink_params + *params) +{ + uint8_t val; + elink_status_t rc; + uint16_t timeout; + /* Initialization time after hot-plug may take up to 300ms for + * some phys type ( e.g. JDSU ) + */ + + for (timeout = 0; timeout < 60; timeout++) { + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) + rc = elink_warpcore_read_sfp_module_eeprom(phy, params, + ELINK_I2C_DEV_ADDR_A0, + 1, 1, &val, + 1); + else + rc = elink_read_sfp_module_eeprom(phy, params, + ELINK_I2C_DEV_ADDR_A0, + 1, 1, &val); + if (rc == 0) { + PMD_DRV_LOG(DEBUG, + "SFP+ module initialization took %d ms", + timeout * 5); + return ELINK_STATUS_OK; + } + DELAY(1000 * 5); + } + rc = elink_read_sfp_module_eeprom(phy, params, ELINK_I2C_DEV_ADDR_A0, + 1, 1, &val); + return rc; +} + +static void elink_8727_power_module(struct bnx2x_softc *sc, + struct elink_phy *phy, uint8_t is_power_up) +{ + /* Make sure GPIOs are not using for LED mode */ + uint16_t val; + /* In the GPIO register, bit 4 is use to determine if the GPIOs are + * operating as INPUT or as OUTPUT. Bit 1 is for input, and 0 for + * output + * Bits 0-1 determine the GPIOs value for OUTPUT in case bit 4 val is 0 + * Bits 8-9 determine the GPIOs value for INPUT in case bit 4 val is 1 + * where the 1st bit is the over-current(only input), and 2nd bit is + * for power( only output ) + * + * In case of NOC feature is disabled and power is up, set GPIO control + * as input to enable listening of over-current indication + */ + if (phy->flags & ELINK_FLAGS_NOC) + return; + if (is_power_up) + val = (1 << 4); + else + /* Set GPIO control to OUTPUT, and set the power bit + * to according to the is_power_up + */ + val = (1 << 1); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL, val); +} + +static elink_status_t elink_8726_set_limiting_mode(struct bnx2x_softc *sc, + struct elink_phy *phy, + uint16_t edc_mode) +{ + uint16_t cur_limiting_mode; + + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, &cur_limiting_mode); + PMD_DRV_LOG(DEBUG, "Current Limiting mode is 0x%x", cur_limiting_mode); + + if (edc_mode == ELINK_EDC_MODE_LIMITING) { + PMD_DRV_LOG(DEBUG, "Setting LIMITING MODE"); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, + ELINK_EDC_MODE_LIMITING); + } else { /* LRM mode ( default ) */ + + PMD_DRV_LOG(DEBUG, "Setting LRM MODE"); + + /* Changing to LRM mode takes quite few seconds. So do it only + * if current mode is limiting (default is LRM) + */ + if (cur_limiting_mode != ELINK_EDC_MODE_LIMITING) + return ELINK_STATUS_OK; + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_LRM_MODE, 0); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER2, 0x128); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_MISC_CTRL0, 0x4008); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_LRM_MODE, 0xaaaa); + } + return ELINK_STATUS_OK; +} + +static elink_status_t elink_8727_set_limiting_mode(struct bnx2x_softc *sc, + struct elink_phy *phy, + uint16_t edc_mode) +{ + uint16_t phy_identifier; + uint16_t rom_ver2_val; + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, &phy_identifier); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + (phy_identifier & ~(1 << 9))); + + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER2, &rom_ver2_val); + /* Keep the MSB 8-bits, and set the LSB 8-bits with the edc_mode */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_ROM_VER2, + (rom_ver2_val & 0xff00) | (edc_mode & 0x00ff)); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + (phy_identifier | (1 << 9))); + + return ELINK_STATUS_OK; +} + +static void elink_8727_specific_func(struct elink_phy *phy, + struct elink_params *params, + uint32_t action) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val; + switch (action) { + case ELINK_DISABLE_TX: + elink_sfp_set_transmitter(params, phy, 0); + break; + case ELINK_ENABLE_TX: + if (!(phy->flags & ELINK_FLAGS_SFP_NOT_APPROVED)) + elink_sfp_set_transmitter(params, phy, 1); + break; + case ELINK_PHY_INIT: + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, + (1 << 2) | (1 << 5)); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL, 0); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0006); + /* Make MOD_ABS give interrupt on change */ + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_OPT_CTRL, &val); + val |= (1 << 12); + if (phy->flags & ELINK_FLAGS_NOC) + val |= (3 << 5); + /* Set 8727 GPIOs to input to allow reading from the 8727 GPIO0 + * status which reflect SFP+ module over-current + */ + if (!(phy->flags & ELINK_FLAGS_NOC)) + val &= 0xff8f; /* Reset bits 4-6 */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, + val); + break; + default: + PMD_DRV_LOG(DEBUG, "Function 0x%x not supported by 8727", + action); + return; + } +} + +static void elink_set_e1e2_module_fault_led(struct elink_params *params, + uint8_t gpio_mode) +{ + struct bnx2x_softc *sc = params->sc; + + uint32_t fault_led_gpio = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info. + port_hw_config[params->port]. + sfp_ctrl)) & + PORT_HW_CFG_FAULT_MODULE_LED_MASK; + switch (fault_led_gpio) { + case PORT_HW_CFG_FAULT_MODULE_LED_DISABLED: + return; + case PORT_HW_CFG_FAULT_MODULE_LED_GPIO0: + case PORT_HW_CFG_FAULT_MODULE_LED_GPIO1: + case PORT_HW_CFG_FAULT_MODULE_LED_GPIO2: + case PORT_HW_CFG_FAULT_MODULE_LED_GPIO3: + { + uint8_t gpio_port = elink_get_gpio_port(params); + uint16_t gpio_pin = fault_led_gpio - + PORT_HW_CFG_FAULT_MODULE_LED_GPIO0; + PMD_DRV_LOG(DEBUG, "Set fault module-detected led " + "pin %x port %x mode %x", + gpio_pin, gpio_port, gpio_mode); + elink_cb_gpio_write(sc, gpio_pin, gpio_mode, gpio_port); + } + break; + default: + PMD_DRV_LOG(DEBUG, "Error: Invalid fault led mode 0x%x", + fault_led_gpio); + } +} + +static void elink_set_e3_module_fault_led(struct elink_params *params, + uint8_t gpio_mode) +{ + uint32_t pin_cfg; + uint8_t port = params->port; + struct bnx2x_softc *sc = params->sc; + pin_cfg = (REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].e3_sfp_ctrl)) & + PORT_HW_CFG_E3_FAULT_MDL_LED_MASK) >> + PORT_HW_CFG_E3_FAULT_MDL_LED_SHIFT; + PMD_DRV_LOG(DEBUG, "Setting Fault LED to %d using pin cfg %d", + gpio_mode, pin_cfg); + elink_set_cfg_pin(sc, pin_cfg, gpio_mode); +} + +static void elink_set_sfp_module_fault_led(struct elink_params *params, + uint8_t gpio_mode) +{ + struct bnx2x_softc *sc = params->sc; + PMD_DRV_LOG(DEBUG, "Setting SFP+ module fault LED to %d", gpio_mode); + if (CHIP_IS_E3(sc)) { + /* Low ==> if SFP+ module is supported otherwise + * High ==> if SFP+ module is not on the approved vendor list + */ + elink_set_e3_module_fault_led(params, gpio_mode); + } else + elink_set_e1e2_module_fault_led(params, gpio_mode); +} + +static void elink_warpcore_hw_reset(__rte_unused struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + elink_warpcore_power_module(params, 0); + /* Put Warpcore in low power mode */ + REG_WR(sc, MISC_REG_WC0_RESET, 0x0c0e); + + /* Put LCPLL in low power mode */ + REG_WR(sc, MISC_REG_LCPLL_E40_PWRDWN, 1); + REG_WR(sc, MISC_REG_LCPLL_E40_RESETB_ANA, 0); + REG_WR(sc, MISC_REG_LCPLL_E40_RESETB_DIG, 0); +} + +static void elink_power_sfp_module(struct elink_params *params, + struct elink_phy *phy, uint8_t power) +{ + PMD_DRV_LOG(DEBUG, "Setting SFP+ power to %x", power); + + switch (phy->type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722: + elink_8727_power_module(params->sc, phy, power); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: + elink_warpcore_power_module(params, power); + break; + default: + break; + } +} + +static void elink_warpcore_set_limiting_mode(struct elink_params *params, + struct elink_phy *phy, + uint16_t edc_mode) +{ + uint16_t val = 0; + uint16_t mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT; + struct bnx2x_softc *sc = params->sc; + + uint8_t lane = elink_get_warpcore_lane(params); + /* This is a global register which controls all lanes */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val); + val &= ~(0xf << (lane << 2)); + + switch (edc_mode) { + case ELINK_EDC_MODE_LINEAR: + case ELINK_EDC_MODE_LIMITING: + mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_DEFAULT; + break; + case ELINK_EDC_MODE_PASSIVE_DAC: + case ELINK_EDC_MODE_ACTIVE_DAC: + mode = MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE_SFP_DAC; + break; + default: + break; + } + + val |= (mode << (lane << 2)); + elink_cl45_write(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, val); + /* A must read */ + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val); + + /* Restart microcode to re-read the new mode */ + elink_warpcore_reset_lane(sc, phy, 1); + elink_warpcore_reset_lane(sc, phy, 0); + +} + +static void elink_set_limiting_mode(struct elink_params *params, + struct elink_phy *phy, uint16_t edc_mode) +{ + switch (phy->type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726: + elink_8726_set_limiting_mode(params->sc, phy, edc_mode); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722: + elink_8727_set_limiting_mode(params->sc, phy, edc_mode); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: + elink_warpcore_set_limiting_mode(params, phy, edc_mode); + break; + } +} + +static elink_status_t elink_sfp_module_detection(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t edc_mode; + elink_status_t rc = ELINK_STATUS_OK; + + uint32_t val = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_feature_config[params-> + port]. + config)); + /* Enabled transmitter by default */ + elink_sfp_set_transmitter(params, phy, 1); + PMD_DRV_LOG(DEBUG, "SFP+ module plugged in/out detected on port %d", + params->port); + /* Power up module */ + elink_power_sfp_module(params, phy, 1); + if (elink_get_edc_mode(phy, params, &edc_mode) != 0) { + PMD_DRV_LOG(DEBUG, "Failed to get valid module type"); + return ELINK_STATUS_ERROR; + } else if (elink_verify_sfp_module(phy, params) != 0) { + /* Check SFP+ module compatibility */ + PMD_DRV_LOG(DEBUG, "Module verification failed!!"); + rc = ELINK_STATUS_ERROR; + /* Turn on fault module-detected led */ + elink_set_sfp_module_fault_led(params, + MISC_REGISTERS_GPIO_HIGH); + + /* Check if need to power down the SFP+ module */ + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN) { + PMD_DRV_LOG(DEBUG, "Shutdown SFP+ module!!"); + elink_power_sfp_module(params, phy, 0); + return rc; + } + } else { + /* Turn off fault module-detected led */ + elink_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_LOW); + } + + /* Check and set limiting mode / LRM mode on 8726. On 8727 it + * is done automatically + */ + elink_set_limiting_mode(params, phy, edc_mode); + + /* Disable transmit for this module if the module is not approved, and + * laser needs to be disabled. + */ + if ((rc != 0) && + ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)) + elink_sfp_set_transmitter(params, phy, 0); + + return rc; +} + +void elink_handle_module_detect_int(struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + struct elink_phy *phy; + uint32_t gpio_val; + uint8_t gpio_num, gpio_port; + if (CHIP_IS_E3(sc)) { + phy = ¶ms->phy[ELINK_INT_PHY]; + /* Always enable TX laser,will be disabled in case of fault */ + elink_sfp_set_transmitter(params, phy, 1); + } else { + phy = ¶ms->phy[ELINK_EXT_PHY1]; + } + if (elink_get_mod_abs_int_cfg(sc, params->shmem_base, + params->port, &gpio_num, &gpio_port) == + ELINK_STATUS_ERROR) { + PMD_DRV_LOG(DEBUG, "Failed to get MOD_ABS interrupt config"); + return; + } + + /* Set valid module led off */ + elink_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_HIGH); + + /* Get current gpio val reflecting module plugged in / out */ + gpio_val = elink_cb_gpio_read(sc, gpio_num, gpio_port); + + /* Call the handling function in case module is detected */ + if (gpio_val == 0) { + elink_set_mdio_emac_per_phy(sc, params); + elink_set_aer_mmd(params, phy); + + elink_power_sfp_module(params, phy, 1); + elink_cb_gpio_int_write(sc, gpio_num, + MISC_REGISTERS_GPIO_INT_OUTPUT_CLR, + gpio_port); + if (elink_wait_for_sfp_module_initialized(phy, params) == 0) { + elink_sfp_module_detection(phy, params); + if (CHIP_IS_E3(sc)) { + uint16_t rx_tx_in_reset; + /* In case WC is out of reset, reconfigure the + * link speed while taking into account 1G + * module limitation. + */ + elink_cl45_read(sc, phy, + MDIO_WC_DEVAD, + MDIO_WC_REG_DIGITAL5_MISC6, + &rx_tx_in_reset); + if ((!rx_tx_in_reset) && + (params->link_flags & + ELINK_PHY_INITIALIZED)) { + elink_warpcore_reset_lane(sc, phy, 1); + elink_warpcore_config_sfi(phy, params); + elink_warpcore_reset_lane(sc, phy, 0); + } + } + } else { + PMD_DRV_LOG(DEBUG, "SFP+ module is not initialized"); + } + } else { + elink_cb_gpio_int_write(sc, gpio_num, + MISC_REGISTERS_GPIO_INT_OUTPUT_SET, + gpio_port); + /* Module was plugged out. + * Disable transmit for this module + */ + phy->media_type = ELINK_ETH_PHY_NOT_PRESENT; + } +} + +/******************************************************************/ +/* Used by 8706 and 8727 */ +/******************************************************************/ +static void elink_sfp_mask_fault(struct bnx2x_softc *sc, + struct elink_phy *phy, + uint16_t alarm_status_offset, + uint16_t alarm_ctrl_offset) +{ + uint16_t alarm_status, val; + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, alarm_status_offset, &alarm_status); + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, alarm_status_offset, &alarm_status); + /* Mask or enable the fault event. */ + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, alarm_ctrl_offset, &val); + if (alarm_status & (1 << 0)) + val &= ~(1 << 0); + else + val |= (1 << 0); + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, alarm_ctrl_offset, val); +} + +/******************************************************************/ +/* common BNX2X8706/BNX2X8726 PHY SECTION */ +/******************************************************************/ +static uint8_t elink_8706_8726_read_status(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + uint8_t link_up = 0; + uint16_t val1, val2, rx_sd, pcs_status; + struct bnx2x_softc *sc = params->sc; + PMD_DRV_LOG(DEBUG, "XGXS 8706/8726"); + /* Clear RX Alarm */ + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2); + + elink_sfp_mask_fault(sc, phy, MDIO_PMA_LASI_TXSTAT, + MDIO_PMA_LASI_TXCTRL); + + /* Clear LASI indication */ + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2); + PMD_DRV_LOG(DEBUG, "8706/8726 LASI status 0x%x--> 0x%x", val1, val2); + + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); + elink_cl45_read(sc, phy, + MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &pcs_status); + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2); + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2); + + PMD_DRV_LOG(DEBUG, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps" + " link_status 0x%x", rx_sd, pcs_status, val2); + /* Link is up if both bit 0 of pmd_rx_sd and bit 0 of pcs_status + * are set, or if the autoneg bit 1 is set + */ + link_up = ((rx_sd & pcs_status & 0x1) || (val2 & (1 << 1))); + if (link_up) { + if (val2 & (1 << 1)) + vars->line_speed = ELINK_SPEED_1000; + else + vars->line_speed = ELINK_SPEED_10000; + elink_ext_phy_resolve_fc(phy, params, vars); + vars->duplex = DUPLEX_FULL; + } + + /* Capture 10G link fault. Read twice to clear stale value. */ + if (vars->line_speed == ELINK_SPEED_10000) { + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, + MDIO_PMA_LASI_TXSTAT, &val1); + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, + MDIO_PMA_LASI_TXSTAT, &val1); + if (val1 & (1 << 0)) + vars->fault_detected = 1; + } + + return link_up; +} + +/******************************************************************/ +/* BNX2X8706 PHY SECTION */ +/******************************************************************/ +static uint8_t elink_8706_config_init(struct elink_phy *phy, + struct elink_params *params, + __rte_unused struct elink_vars *vars) +{ + uint32_t tx_en_mode; + uint16_t cnt, val, tmp1; + struct bnx2x_softc *sc = params->sc; + + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); + /* HW reset */ + elink_ext_phy_hw_reset(sc, params->port); + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040); + elink_wait_reset_complete(sc, phy, params); + + /* Wait until fw is loaded */ + for (cnt = 0; cnt < 100; cnt++) { + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER1, &val); + if (val) + break; + DELAY(1000 * 10); + } + PMD_DRV_LOG(DEBUG, "XGXS 8706 is initialized after %d ms", cnt); + if ((params->feature_config_flags & + ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { + uint8_t i; + uint16_t reg; + for (i = 0; i < 4; i++) { + reg = MDIO_XS_8706_REG_BANK_RX0 + + i * (MDIO_XS_8706_REG_BANK_RX1 - + MDIO_XS_8706_REG_BANK_RX0); + elink_cl45_read(sc, phy, MDIO_XS_DEVAD, reg, &val); + /* Clear first 3 bits of the control */ + val &= ~0x7; + /* Set control bits according to configuration */ + val |= (phy->rx_preemphasis[i] & 0x7); + PMD_DRV_LOG(DEBUG, "Setting RX Equalizer to BNX2X8706" + " reg 0x%x <-- val 0x%x", reg, val); + elink_cl45_write(sc, phy, MDIO_XS_DEVAD, reg, val); + } + } + /* Force speed */ + if (phy->req_line_speed == ELINK_SPEED_10000) { + PMD_DRV_LOG(DEBUG, "XGXS 8706 force 10Gbps"); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_DIGITAL_CTRL, 0x400); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_TXCTRL, 0); + /* Arm LASI for link and Tx fault. */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 3); + } else { + /* Force 1Gbps using autoneg with 1G advertisement */ + + /* Allow CL37 through CL73 */ + PMD_DRV_LOG(DEBUG, "XGXS 8706 AutoNeg"); + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c); + + /* Enable Full-Duplex advertisement on CL37 */ + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LP, 0x0020); + /* Enable CL37 AN */ + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000); + /* 1G support */ + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_ADV, (1 << 5)); + + /* Enable clause 73 AN */ + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, 0x0400); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x0004); + } + elink_save_bnx2x_spirom_ver(sc, phy, params->port); + + /* If TX Laser is controlled by GPIO_0, do not let PHY go into low + * power mode, if TX Laser is disabled + */ + + tx_en_mode = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port]. + sfp_ctrl)) + & PORT_HW_CFG_TX_LASER_MASK; + + if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) { + PMD_DRV_LOG(DEBUG, "Enabling TXONOFF_PWRDN_DIS"); + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL, + &tmp1); + tmp1 |= 0x1; + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL, + tmp1); + } + + return ELINK_STATUS_OK; +} + +static elink_status_t elink_8706_read_status(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + return elink_8706_8726_read_status(phy, params, vars); +} + +/******************************************************************/ +/* BNX2X8726 PHY SECTION */ +/******************************************************************/ +static void elink_8726_config_loopback(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + PMD_DRV_LOG(DEBUG, "PMA/PMD ext_phy_loopback: 8726"); + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0001); +} + +static void elink_8726_external_rom_boot(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + /* Need to wait 100ms after reset */ + DELAY(1000 * 100); + + /* Micro controller re-boot */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x018B); + + /* Set soft reset */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0001); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_GEN_CTRL, + MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP); + + /* Wait for 150ms for microcode load */ + DELAY(1000 * 150); + + /* Disable serial boot control, tristates pins SS_N, SCK, MOSI, MISO */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0000); + + DELAY(1000 * 200); + elink_save_bnx2x_spirom_ver(sc, phy, params->port); +} + +static uint8_t elink_8726_read_status(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val1; + uint8_t link_up = elink_8706_8726_read_status(phy, params, vars); + if (link_up) { + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, + &val1); + if (val1 & (1 << 15)) { + PMD_DRV_LOG(DEBUG, "Tx is disabled"); + link_up = 0; + vars->line_speed = 0; + } + } + return link_up; +} + +static elink_status_t elink_8726_config_init(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + PMD_DRV_LOG(DEBUG, "Initializing BNX2X8726"); + + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15); + elink_wait_reset_complete(sc, phy, params); + + elink_8726_external_rom_boot(phy, params); + + /* Need to call module detected on initialization since the module + * detection triggered by actual module insertion might occur before + * driver is loaded, and when driver is loaded, it reset all + * registers, including the transmitter + */ + elink_sfp_module_detection(phy, params); + + if (phy->req_line_speed == ELINK_SPEED_1000) { + PMD_DRV_LOG(DEBUG, "Setting 1G force"); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x5); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, 0x400); + } else if ((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) && + ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) != + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { + PMD_DRV_LOG(DEBUG, "Setting 1G clause37"); + /* Set Flow control */ + elink_ext_phy_set_pause(params, phy, vars); + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, 0x20); + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c); + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, 0x0020); + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1000); + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); + /* Enable RX-ALARM control to receive interrupt for 1G speed + * change + */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x4); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, 0x400); + + } else { /* Default 10G. Set only LASI control */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 1); + } + + /* Set TX PreEmphasis if needed */ + if ((params->feature_config_flags & + ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { + PMD_DRV_LOG(DEBUG, + "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x", + phy->tx_preemphasis[0], phy->tx_preemphasis[1]); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8726_TX_CTRL1, + phy->tx_preemphasis[0]); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8726_TX_CTRL2, + phy->tx_preemphasis[1]); + } + + return ELINK_STATUS_OK; + +} + +static void elink_8726_link_reset(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + PMD_DRV_LOG(DEBUG, "elink_8726_link_reset port %d", params->port); + /* Set serial boot control for external load */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001); +} + +/******************************************************************/ +/* BNX2X8727 PHY SECTION */ +/******************************************************************/ + +static void elink_8727_set_link_led(struct elink_phy *phy, + struct elink_params *params, uint8_t mode) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t led_mode_bitmask = 0; + uint16_t gpio_pins_bitmask = 0; + uint16_t val; + /* Only NOC flavor requires to set the LED specifically */ + if (!(phy->flags & ELINK_FLAGS_NOC)) + return; + switch (mode) { + case ELINK_LED_MODE_FRONT_PANEL_OFF: + case ELINK_LED_MODE_OFF: + led_mode_bitmask = 0; + gpio_pins_bitmask = 0x03; + break; + case ELINK_LED_MODE_ON: + led_mode_bitmask = 0; + gpio_pins_bitmask = 0x02; + break; + case ELINK_LED_MODE_OPER: + led_mode_bitmask = 0x60; + gpio_pins_bitmask = 0x11; + break; + } + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, &val); + val &= 0xff8f; + val |= led_mode_bitmask; + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, val); + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL, &val); + val &= 0xffe0; + val |= gpio_pins_bitmask; + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL, val); +} + +static void elink_8727_hw_reset(__rte_unused struct elink_phy *phy, + struct elink_params *params) +{ + uint32_t swap_val, swap_override; + uint8_t port; + /* The PHY reset is controlled by GPIO 1. Fake the port number + * to cancel the swap done in set_gpio() + */ + struct bnx2x_softc *sc = params->sc; + swap_val = REG_RD(sc, NIG_REG_PORT_SWAP); + swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE); + port = (swap_val && swap_override) ^ 1; + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, port); +} + +static void elink_8727_config_speed(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t tmp1, val; + /* Set option 1G speed */ + if ((phy->req_line_speed == ELINK_SPEED_1000) || + (phy->media_type == ELINK_ETH_PHY_SFP_1G_FIBER)) { + PMD_DRV_LOG(DEBUG, "Setting 1G force"); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD); + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, &tmp1); + PMD_DRV_LOG(DEBUG, "1.7 = 0x%x", tmp1); + /* Power down the XAUI until link is up in case of dual-media + * and 1G + */ + if (ELINK_DUAL_MEDIA(params)) { + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_GP, &val); + val |= (3 << 10); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_GP, val); + } + } else if ((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) && + ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) && + ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) != + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { + + PMD_DRV_LOG(DEBUG, "Setting 1G clause37"); + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL, 0); + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x1300); + } else { + /* Since the 8727 has only single reset pin, need to set the 10G + * registers although it is default + */ + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL, + 0x0020); + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CL37_AN, 0x0100); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x2040); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, + 0x0008); + } +} + +static elink_status_t elink_8727_config_init(struct elink_phy *phy, + struct elink_params *params, + __rte_unused struct elink_vars + *vars) +{ + uint32_t tx_en_mode; + uint16_t tmp1, mod_abs, tmp2; + struct bnx2x_softc *sc = params->sc; + /* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */ + + elink_wait_reset_complete(sc, phy, params); + + PMD_DRV_LOG(DEBUG, "Initializing BNX2X8727"); + + elink_8727_specific_func(phy, params, ELINK_PHY_INIT); + /* Initially configure MOD_ABS to interrupt when module is + * presence( bit 8) + */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, &mod_abs); + /* Set EDC off by setting OPTXLOS signal input to low (bit 9). + * When the EDC is off it locks onto a reference clock and avoids + * becoming 'lost' + */ + mod_abs &= ~(1 << 8); + if (!(phy->flags & ELINK_FLAGS_NOC)) + mod_abs &= ~(1 << 9); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); + + /* Enable/Disable PHY transmitter output */ + elink_set_disable_pmd_transmit(params, phy, 0); + + elink_8727_power_module(sc, phy, 1); + + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &tmp1); + + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1); + + elink_8727_config_speed(phy, params); + + /* Set TX PreEmphasis if needed */ + if ((params->feature_config_flags & + ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { + PMD_DRV_LOG(DEBUG, "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x", + phy->tx_preemphasis[0], phy->tx_preemphasis[1]); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_TX_CTRL1, + phy->tx_preemphasis[0]); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_TX_CTRL2, + phy->tx_preemphasis[1]); + } + + /* If TX Laser is controlled by GPIO_0, do not let PHY go into low + * power mode, if TX Laser is disabled + */ + tx_en_mode = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port]. + sfp_ctrl)) + & PORT_HW_CFG_TX_LASER_MASK; + + if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) { + + PMD_DRV_LOG(DEBUG, "Enabling TXONOFF_PWRDN_DIS"); + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, + &tmp2); + tmp2 |= 0x1000; + tmp2 &= 0xFFEF; + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, + tmp2); + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, &tmp2); + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, (tmp2 & 0x7fff)); + } + + return ELINK_STATUS_OK; +} + +static void elink_8727_handle_mod_abs(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t mod_abs, rx_alarm_status; + uint32_t val = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_feature_config[params-> + port].config)); + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, + &mod_abs); + if (mod_abs & (1 << 8)) { + + /* Module is absent */ + PMD_DRV_LOG(DEBUG, "MOD_ABS indication show module is absent"); + phy->media_type = ELINK_ETH_PHY_NOT_PRESENT; + /* 1. Set mod_abs to detect next module + * presence event + * 2. Set EDC off by setting OPTXLOS signal input to low + * (bit 9). + * When the EDC is off it locks onto a reference clock and + * avoids becoming 'lost'. + */ + mod_abs &= ~(1 << 8); + if (!(phy->flags & ELINK_FLAGS_NOC)) + mod_abs &= ~(1 << 9); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); + + /* Clear RX alarm since it stays up as long as + * the mod_abs wasn't changed + */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); + + } else { + /* Module is present */ + PMD_DRV_LOG(DEBUG, "MOD_ABS indication show module is present"); + /* First disable transmitter, and if the module is ok, the + * module_detection will enable it + * 1. Set mod_abs to detect next module absent event ( bit 8) + * 2. Restore the default polarity of the OPRXLOS signal and + * this signal will then correctly indicate the presence or + * absence of the Rx signal. (bit 9) + */ + mod_abs |= (1 << 8); + if (!(phy->flags & ELINK_FLAGS_NOC)) + mod_abs |= (1 << 9); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, mod_abs); + + /* Clear RX alarm since it stays up as long as the mod_abs + * wasn't changed. This is need to be done before calling the + * module detection, otherwise it will clear* the link update + * alarm + */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); + + if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) + elink_sfp_set_transmitter(params, phy, 0); + + if (elink_wait_for_sfp_module_initialized(phy, params) == 0) { + elink_sfp_module_detection(phy, params); + } else { + PMD_DRV_LOG(DEBUG, "SFP+ module is not initialized"); + } + + /* Reconfigure link speed based on module type limitations */ + elink_8727_config_speed(phy, params); + } + + PMD_DRV_LOG(DEBUG, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status); + /* No need to check link status in case of module plugged in/out */ +} + +static uint8_t elink_8727_read_status(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t link_up = 0, oc_port = params->port; + uint16_t link_status = 0; + uint16_t rx_alarm_status, lasi_ctrl, val1; + + /* If PHY is not initialized, do not check link status */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, &lasi_ctrl); + if (!lasi_ctrl) + return 0; + + /* Check the LASI on Rx */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); + vars->line_speed = 0; + PMD_DRV_LOG(DEBUG, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status); + + elink_sfp_mask_fault(sc, phy, MDIO_PMA_LASI_TXSTAT, + MDIO_PMA_LASI_TXCTRL); + + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); + + PMD_DRV_LOG(DEBUG, "8727 LASI status 0x%x", val1); + + /* Clear MSG-OUT */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1); + + /* If a module is present and there is need to check + * for over current + */ + if (!(phy->flags & ELINK_FLAGS_NOC) && !(rx_alarm_status & (1 << 5))) { + /* Check over-current using 8727 GPIO0 input */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_GPIO_CTRL, + &val1); + + if ((val1 & (1 << 8)) == 0) { + if (!CHIP_IS_E1x(sc)) + oc_port = SC_PATH(sc) + (params->port << 1); + PMD_DRV_LOG(DEBUG, + "8727 Power fault has been detected on port %d", + oc_port); + elink_cb_event_log(sc, ELINK_LOG_ID_OVER_CURRENT, oc_port); //"Error: Power fault on Port %d has " + // "been detected and the power to " + // "that SFP+ module has been removed " + // "to prevent failure of the card. " + // "Please remove the SFP+ module and " + // "restart the system to clear this " + // "error.", + /* Disable all RX_ALARMs except for mod_abs */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_LASI_RXCTRL, (1 << 5)); + + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, &val1); + /* Wait for module_absent_event */ + val1 |= (1 << 8); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, val1); + /* Clear RX alarm */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); + elink_8727_power_module(params->sc, phy, 0); + return 0; + } + } + + /* Over current check */ + /* When module absent bit is set, check module */ + if (rx_alarm_status & (1 << 5)) { + elink_8727_handle_mod_abs(phy, params); + /* Enable all mod_abs and link detection bits */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXCTRL, + ((1 << 5) | (1 << 2))); + } + + if (!(phy->flags & ELINK_FLAGS_SFP_NOT_APPROVED)) { + PMD_DRV_LOG(DEBUG, "Enabling 8727 TX laser"); + elink_sfp_set_transmitter(params, phy, 1); + } else { + PMD_DRV_LOG(DEBUG, "Tx is disabled"); + return 0; + } + + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8073_SPEED_LINK_STATUS, &link_status); + + /* Bits 0..2 --> speed detected, + * Bits 13..15--> link is down + */ + if ((link_status & (1 << 2)) && (!(link_status & (1 << 15)))) { + link_up = 1; + vars->line_speed = ELINK_SPEED_10000; + PMD_DRV_LOG(DEBUG, "port %x: External link up in 10G", + params->port); + } else if ((link_status & (1 << 0)) && (!(link_status & (1 << 13)))) { + link_up = 1; + vars->line_speed = ELINK_SPEED_1000; + PMD_DRV_LOG(DEBUG, "port %x: External link up in 1G", + params->port); + } else { + link_up = 0; + PMD_DRV_LOG(DEBUG, "port %x: External link is down", + params->port); + } + + /* Capture 10G link fault. */ + if (vars->line_speed == ELINK_SPEED_10000) { + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, + MDIO_PMA_LASI_TXSTAT, &val1); + + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, + MDIO_PMA_LASI_TXSTAT, &val1); + + if (val1 & (1 << 0)) { + vars->fault_detected = 1; + } + } + + if (link_up) { + elink_ext_phy_resolve_fc(phy, params, vars); + vars->duplex = DUPLEX_FULL; + PMD_DRV_LOG(DEBUG, "duplex = 0x%x", vars->duplex); + } + + if ((ELINK_DUAL_MEDIA(params)) && + (phy->req_line_speed == ELINK_SPEED_1000)) { + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_GP, &val1); + /* In case of dual-media board and 1G, power up the XAUI side, + * otherwise power it down. For 10G it is done automatically + */ + if (link_up) + val1 &= ~(3 << 10); + else + val1 |= (3 << 10); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_PCS_GP, val1); + } + return link_up; +} + +static void elink_8727_link_reset(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + + /* Enable/Disable PHY transmitter output */ + elink_set_disable_pmd_transmit(params, phy, 1); + + /* Disable Transmitter */ + elink_sfp_set_transmitter(params, phy, 0); + /* Clear LASI */ + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0); + +} + +/******************************************************************/ +/* BNX2X8481/BNX2X84823/BNX2X84833 PHY SECTION */ +/******************************************************************/ +static void elink_save_848xx_spirom_version(struct elink_phy *phy, + struct bnx2x_softc *sc, uint8_t port) +{ + uint16_t val, fw_ver2, cnt, i; + static struct elink_reg_set reg_set[] = { + {MDIO_PMA_DEVAD, 0xA819, 0x0014}, + {MDIO_PMA_DEVAD, 0xA81A, 0xc200}, + {MDIO_PMA_DEVAD, 0xA81B, 0x0000}, + {MDIO_PMA_DEVAD, 0xA81C, 0x0300}, + {MDIO_PMA_DEVAD, 0xA817, 0x0009} + }; + uint16_t fw_ver1; + + if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) || + (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) { + elink_cl45_read(sc, phy, MDIO_CTL_DEVAD, 0x400f, &fw_ver1); + elink_save_spirom_version(sc, port, fw_ver1 & 0xfff, + phy->ver_addr); + } else { + /* For 32-bit registers in 848xx, access via MDIO2ARM i/f. */ + /* (1) set reg 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */ + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + elink_cl45_write(sc, phy, reg_set[i].devad, + reg_set[i].reg, reg_set[i].val); + + for (cnt = 0; cnt < 100; cnt++) { + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xA818, &val); + if (val & 1) + break; + DELAY(5); + } + if (cnt == 100) { + PMD_DRV_LOG(DEBUG, "Unable to read 848xx " + "phy fw version(1)"); + elink_save_spirom_version(sc, port, 0, phy->ver_addr); + return; + } + + /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */ + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000); + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A); + for (cnt = 0; cnt < 100; cnt++) { + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xA818, &val); + if (val & 1) + break; + DELAY(5); + } + if (cnt == 100) { + PMD_DRV_LOG(DEBUG, "Unable to read 848xx phy fw " + "version(2)"); + elink_save_spirom_version(sc, port, 0, phy->ver_addr); + return; + } + + /* lower 16 bits of the register SPI_FW_STATUS */ + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1); + /* upper 16 bits of register SPI_FW_STATUS */ + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2); + + elink_save_spirom_version(sc, port, (fw_ver2 << 16) | fw_ver1, + phy->ver_addr); + } + +} + +static void elink_848xx_set_led(struct bnx2x_softc *sc, struct elink_phy *phy) +{ + uint16_t val, offset, i; + static struct elink_reg_set reg_set[] = { + {MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED1_MASK, 0x0080}, + {MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED2_MASK, 0x0018}, + {MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED3_MASK, 0x0006}, + {MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LED3_BLINK, 0x0000}, + {MDIO_PMA_DEVAD, MDIO_PMA_REG_84823_CTL_SLOW_CLK_CNT_HIGH, + MDIO_PMA_REG_84823_BLINK_RATE_VAL_15P9HZ}, + {MDIO_AN_DEVAD, 0xFFFB, 0xFFFD} + }; + /* PHYC_CTL_LED_CTL */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LINK_SIGNAL, &val); + val &= 0xFE00; + val |= 0x0092; + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LINK_SIGNAL, val); + + for (i = 0; i < ARRAY_SIZE(reg_set); i++) + elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg, + reg_set[i].val); + + if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) || + (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) + offset = MDIO_PMA_REG_84833_CTL_LED_CTL_1; + else + offset = MDIO_PMA_REG_84823_CTL_LED_CTL_1; + + /* stretch_en for LED3 */ + elink_cl45_read_or_write(sc, phy, + MDIO_PMA_DEVAD, offset, + MDIO_PMA_REG_84823_LED3_STRETCH_EN); +} + +static void elink_848xx_specific_func(struct elink_phy *phy, + struct elink_params *params, + uint32_t action) +{ + struct bnx2x_softc *sc = params->sc; + switch (action) { + case ELINK_PHY_INIT: + if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) && + (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) { + /* Save spirom version */ + elink_save_848xx_spirom_version(phy, sc, params->port); + } + /* This phy uses the NIG latch mechanism since link indication + * arrives through its LED4 and not via its LASI signal, so we + * get steady signal instead of clear on read + */ + elink_bits_en(sc, NIG_REG_LATCH_BC_0 + params->port * 4, + 1 << ELINK_NIG_LATCH_BC_ENABLE_MI_INT); + + elink_848xx_set_led(sc, phy); + break; + } +} + +static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t autoneg_val, an_1000_val, an_10_100_val; + + elink_848xx_specific_func(phy, params, ELINK_PHY_INIT); + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0000); + + /* set 1000 speed advertisement */ + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, + &an_1000_val); + + elink_ext_phy_set_pause(params, phy, vars); + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_AN_ADV, &an_10_100_val); + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_MII_CTRL, + &autoneg_val); + /* Disable forced speed */ + autoneg_val &= + ~((1 << 6) | (1 << 8) | (1 << 9) | (1 << 12) | (1 << 13)); + an_10_100_val &= ~((1 << 5) | (1 << 6) | (1 << 7) | (1 << 8)); + + if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (phy->req_line_speed == ELINK_SPEED_1000)) { + an_1000_val |= (1 << 8); + autoneg_val |= (1 << 9 | 1 << 12); + if (phy->req_duplex == DUPLEX_FULL) + an_1000_val |= (1 << 9); + PMD_DRV_LOG(DEBUG, "Advertising 1G"); + } else + an_1000_val &= ~((1 << 8) | (1 << 9)); + + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_1000T_CTRL, + an_1000_val); + + /* Set 10/100 speed advertisement */ + if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG) { + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { + /* Enable autoneg and restart autoneg for legacy speeds + */ + autoneg_val |= (1 << 9 | 1 << 12); + an_10_100_val |= (1 << 8); + PMD_DRV_LOG(DEBUG, "Advertising 100M-FD"); + } + + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { + /* Enable autoneg and restart autoneg for legacy speeds + */ + autoneg_val |= (1 << 9 | 1 << 12); + an_10_100_val |= (1 << 7); + PMD_DRV_LOG(DEBUG, "Advertising 100M-HD"); + } + + if ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && + (phy->supported & ELINK_SUPPORTED_10baseT_Full)) { + an_10_100_val |= (1 << 6); + autoneg_val |= (1 << 9 | 1 << 12); + PMD_DRV_LOG(DEBUG, "Advertising 10M-FD"); + } + + if ((phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) && + (phy->supported & ELINK_SUPPORTED_10baseT_Half)) { + an_10_100_val |= (1 << 5); + autoneg_val |= (1 << 9 | 1 << 12); + PMD_DRV_LOG(DEBUG, "Advertising 10M-HD"); + } + } + + /* Only 10/100 are allowed to work in FORCE mode */ + if ((phy->req_line_speed == ELINK_SPEED_100) && + (phy->supported & + (ELINK_SUPPORTED_100baseT_Half | ELINK_SUPPORTED_100baseT_Full))) { + autoneg_val |= (1 << 13); + /* Enabled AUTO-MDIX when autoneg is disabled */ + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, + (1 << 15 | 1 << 9 | 7 << 0)); + /* The PHY needs this set even for forced link. */ + an_10_100_val |= (1 << 8) | (1 << 7); + PMD_DRV_LOG(DEBUG, "Setting 100M force"); + } + if ((phy->req_line_speed == ELINK_SPEED_10) && + (phy->supported & + (ELINK_SUPPORTED_10baseT_Half | ELINK_SUPPORTED_10baseT_Full))) { + /* Enabled AUTO-MDIX when autoneg is disabled */ + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, + (1 << 15 | 1 << 9 | 7 << 0)); + PMD_DRV_LOG(DEBUG, "Setting 10M force"); + } + + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_AN_ADV, + an_10_100_val); + + if (phy->req_duplex == DUPLEX_FULL) + autoneg_val |= (1 << 8); + + /* Always write this if this is not 84833/4. + * For 84833/4, write it only when it's a forced speed. + */ + if (((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) && + (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) || + ((autoneg_val & (1 << 12)) == 0)) + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, autoneg_val); + + if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || + (phy->req_line_speed == ELINK_SPEED_10000)) { + PMD_DRV_LOG(DEBUG, "Advertising 10G"); + /* Restart autoneg for 10G */ + + elink_cl45_read_or_write(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_10GBASE_T_AN_CTRL, + 0x1000); + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x3200); + } else + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_10GBASE_T_AN_CTRL, 1); + + return ELINK_STATUS_OK; +} + +static elink_status_t elink_8481_config_init(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + /* Restore normal power mode */ + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); + + /* HW reset */ + elink_ext_phy_hw_reset(sc, params->port); + elink_wait_reset_complete(sc, phy, params); + + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15); + return elink_848xx_cmn_config_init(phy, params, vars); +} + +#define PHY84833_CMDHDLR_WAIT 300 +#define PHY84833_CMDHDLR_MAX_ARGS 5 +static elink_status_t elink_84833_cmd_hdlr(struct elink_phy *phy, + struct elink_params *params, + uint16_t fw_cmd, uint16_t cmd_args[], + int argc) +{ + int idx; + uint16_t val; + struct bnx2x_softc *sc = params->sc; + /* Write CMD_OPEN_OVERRIDE to STATUS reg */ + elink_cl45_write(sc, phy, MDIO_CTL_DEVAD, + MDIO_84833_CMD_HDLR_STATUS, + PHY84833_STATUS_CMD_OPEN_OVERRIDE); + for (idx = 0; idx < PHY84833_CMDHDLR_WAIT; idx++) { + elink_cl45_read(sc, phy, MDIO_CTL_DEVAD, + MDIO_84833_CMD_HDLR_STATUS, &val); + if (val == PHY84833_STATUS_CMD_OPEN_FOR_CMDS) + break; + DELAY(1000 * 1); + } + if (idx >= PHY84833_CMDHDLR_WAIT) { + PMD_DRV_LOG(DEBUG, "FW cmd: FW not ready."); + return ELINK_STATUS_ERROR; + } + + /* Prepare argument(s) and issue command */ + for (idx = 0; idx < argc; idx++) { + elink_cl45_write(sc, phy, MDIO_CTL_DEVAD, + MDIO_84833_CMD_HDLR_DATA1 + idx, + cmd_args[idx]); + } + elink_cl45_write(sc, phy, MDIO_CTL_DEVAD, + MDIO_84833_CMD_HDLR_COMMAND, fw_cmd); + for (idx = 0; idx < PHY84833_CMDHDLR_WAIT; idx++) { + elink_cl45_read(sc, phy, MDIO_CTL_DEVAD, + MDIO_84833_CMD_HDLR_STATUS, &val); + if ((val == PHY84833_STATUS_CMD_COMPLETE_PASS) || + (val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) + break; + DELAY(1000 * 1); + } + if ((idx >= PHY84833_CMDHDLR_WAIT) || + (val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) { + PMD_DRV_LOG(DEBUG, "FW cmd failed."); + return ELINK_STATUS_ERROR; + } + /* Gather returning data */ + for (idx = 0; idx < argc; idx++) { + elink_cl45_read(sc, phy, MDIO_CTL_DEVAD, + MDIO_84833_CMD_HDLR_DATA1 + idx, + &cmd_args[idx]); + } + elink_cl45_write(sc, phy, MDIO_CTL_DEVAD, + MDIO_84833_CMD_HDLR_STATUS, + PHY84833_STATUS_CMD_CLEAR_COMPLETE); + return ELINK_STATUS_OK; +} + +static elink_status_t elink_84833_pair_swap_cfg(struct elink_phy *phy, + struct elink_params *params, + __rte_unused struct elink_vars + *vars) +{ + uint32_t pair_swap; + uint16_t data[PHY84833_CMDHDLR_MAX_ARGS]; + elink_status_t status; + struct bnx2x_softc *sc = params->sc; + + /* Check for configuration. */ + pair_swap = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port]. + xgbt_phy_cfg)) & + PORT_HW_CFG_RJ45_PAIR_SWAP_MASK; + + if (pair_swap == 0) + return ELINK_STATUS_OK; + + /* Only the second argument is used for this command */ + data[1] = (uint16_t) pair_swap; + + status = elink_84833_cmd_hdlr(phy, params, + PHY84833_CMD_SET_PAIR_SWAP, data, + PHY84833_CMDHDLR_MAX_ARGS); + if (status == ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "Pairswap OK, val=0x%x", data[1]); + } + + return status; +} + +static uint8_t elink_84833_get_reset_gpios(struct bnx2x_softc *sc, + uint32_t shmem_base_path[], + __rte_unused uint32_t chip_id) +{ + uint32_t reset_pin[2]; + uint32_t idx; + uint8_t reset_gpios; + if (CHIP_IS_E3(sc)) { + /* Assume that these will be GPIOs, not EPIOs. */ + for (idx = 0; idx < 2; idx++) { + /* Map config param to register bit. */ + reset_pin[idx] = REG_RD(sc, shmem_base_path[idx] + + offsetof(struct shmem_region, + dev_info. + port_hw_config[0]. + e3_cmn_pin_cfg)); + reset_pin[idx] = + (reset_pin[idx] & PORT_HW_CFG_E3_PHY_RESET_MASK) >> + PORT_HW_CFG_E3_PHY_RESET_SHIFT; + reset_pin[idx] -= PIN_CFG_GPIO0_P0; + reset_pin[idx] = (1 << reset_pin[idx]); + } + reset_gpios = (uint8_t) (reset_pin[0] | reset_pin[1]); + } else { + /* E2, look from diff place of shmem. */ + for (idx = 0; idx < 2; idx++) { + reset_pin[idx] = REG_RD(sc, shmem_base_path[idx] + + offsetof(struct shmem_region, + dev_info. + port_hw_config[0]. + default_cfg)); + reset_pin[idx] &= PORT_HW_CFG_EXT_PHY_GPIO_RST_MASK; + reset_pin[idx] -= PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0; + reset_pin[idx] >>= PORT_HW_CFG_EXT_PHY_GPIO_RST_SHIFT; + reset_pin[idx] = (1 << reset_pin[idx]); + } + reset_gpios = (uint8_t) (reset_pin[0] | reset_pin[1]); + } + + return reset_gpios; +} + +static elink_status_t elink_84833_hw_reset_phy(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t reset_gpios; + uint32_t other_shmem_base_addr = REG_RD(sc, params->shmem2_base + + offsetof(struct shmem2_region, + other_shmem_base_addr)); + + uint32_t shmem_base_path[2]; + + /* Work around for 84833 LED failure inside RESET status */ + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, + MDIO_AN_REG_8481_MII_CTRL_FORCE_1G); + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_8481_1G_100T_EXT_CTRL, + MIDO_AN_REG_8481_EXT_CTRL_FORCE_LEDS_OFF); + + shmem_base_path[0] = params->shmem_base; + shmem_base_path[1] = other_shmem_base_addr; + + reset_gpios = elink_84833_get_reset_gpios(sc, shmem_base_path, + params->chip_id); + + elink_cb_gpio_mult_write(sc, reset_gpios, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + DELAY(10); + PMD_DRV_LOG(DEBUG, "84833 hw reset on pin values 0x%x", reset_gpios); + + return ELINK_STATUS_OK; +} + +static elink_status_t elink_8483x_disable_eee(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + elink_status_t rc; + uint16_t cmd_args = 0; + + PMD_DRV_LOG(DEBUG, "Don't Advertise 10GBase-T EEE"); + + /* Prevent Phy from working in EEE and advertising it */ + rc = elink_84833_cmd_hdlr(phy, params, + PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1); + if (rc != ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "EEE disable failed."); + return rc; + } + + return elink_eee_disable(phy, params, vars); +} + +static elink_status_t elink_8483x_enable_eee(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + elink_status_t rc; + uint16_t cmd_args = 1; + + rc = elink_84833_cmd_hdlr(phy, params, + PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1); + if (rc != ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "EEE enable failed."); + return rc; + } + + return elink_eee_advertise(phy, params, vars, SHMEM_EEE_10G_ADV); +} + +#define PHY84833_CONSTANT_LATENCY 1193 +static elink_status_t elink_848x3_config_init(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t port, initialize = 1; + uint16_t val; + uint32_t actual_phy_selection; + uint16_t cmd_args[PHY84833_CMDHDLR_MAX_ARGS]; + elink_status_t rc = ELINK_STATUS_OK; + + DELAY(1000 * 1); + + if (!(CHIP_IS_E1x(sc))) + port = SC_PATH(sc); + else + port = params->port; + + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823) { + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_3, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); + } else { + /* MDIO reset */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x8000); + } + + elink_wait_reset_complete(sc, phy, params); + + /* Wait for GPHY to come out of reset */ + DELAY(1000 * 50); + if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) && + (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) { + /* BNX2X84823 requires that XGXS links up first @ 10G for normal + * behavior. + */ + uint16_t temp; + temp = vars->line_speed; + vars->line_speed = ELINK_SPEED_10000; + elink_set_autoneg(¶ms->phy[ELINK_INT_PHY], params, vars, 0); + elink_program_serdes(¶ms->phy[ELINK_INT_PHY], params, vars); + vars->line_speed = temp; + } + + elink_cl45_read(sc, phy, MDIO_CTL_DEVAD, + MDIO_CTL_REG_84823_MEDIA, &val); + val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK | + MDIO_CTL_REG_84823_MEDIA_LINE_MASK | + MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN | + MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK | + MDIO_CTL_REG_84823_MEDIA_FIBER_1G); + + if (CHIP_IS_E3(sc)) { + val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK | + MDIO_CTL_REG_84823_MEDIA_LINE_MASK); + } else { + val |= (MDIO_CTL_REG_84823_CTRL_MAC_XFI | + MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L); + } + + actual_phy_selection = elink_phy_selection(params); + + switch (actual_phy_selection) { + case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT: + /* Do nothing. Essentially this is like the priority copper */ + break; + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY: + val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER; + break; + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY: + val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER; + break; + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY: + /* Do nothing here. The first PHY won't be initialized at all */ + break; + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY: + val |= MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN; + initialize = 0; + break; + } + if (params->phy[ELINK_EXT_PHY2].req_line_speed == ELINK_SPEED_1000) + val |= MDIO_CTL_REG_84823_MEDIA_FIBER_1G; + + elink_cl45_write(sc, phy, MDIO_CTL_DEVAD, + MDIO_CTL_REG_84823_MEDIA, val); + PMD_DRV_LOG(DEBUG, "Multi_phy config = 0x%x, Media control = 0x%x", + params->multi_phy_config, val); + + if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) || + (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) { + elink_84833_pair_swap_cfg(phy, params, vars); + + /* Keep AutogrEEEn disabled. */ + cmd_args[0] = 0x0; + cmd_args[1] = 0x0; + cmd_args[2] = PHY84833_CONSTANT_LATENCY + 1; + cmd_args[3] = PHY84833_CONSTANT_LATENCY; + rc = elink_84833_cmd_hdlr(phy, params, + PHY84833_CMD_SET_EEE_MODE, cmd_args, + PHY84833_CMDHDLR_MAX_ARGS); + if (rc != ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "Cfg AutogrEEEn failed."); + } + } + if (initialize) { + rc = elink_848xx_cmn_config_init(phy, params, vars); + } else { + elink_save_848xx_spirom_version(phy, sc, params->port); + } + /* 84833 PHY has a better feature and doesn't need to support this. */ + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823) { + uint32_t cms_enable = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info. + port_hw_config[params-> + port]. + default_cfg)) & + PORT_HW_CFG_ENABLE_CMS_MASK; + + elink_cl45_read(sc, phy, MDIO_CTL_DEVAD, + MDIO_CTL_REG_84823_USER_CTRL_REG, &val); + if (cms_enable) + val |= MDIO_CTL_REG_84823_USER_CTRL_CMS; + else + val &= ~MDIO_CTL_REG_84823_USER_CTRL_CMS; + elink_cl45_write(sc, phy, MDIO_CTL_DEVAD, + MDIO_CTL_REG_84823_USER_CTRL_REG, val); + } + + elink_cl45_read(sc, phy, MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_FW_REV, &val); + + /* Configure EEE support */ + if ((val >= MDIO_84833_TOP_CFG_FW_EEE) && + (val != MDIO_84833_TOP_CFG_FW_NO_EEE) && + elink_eee_has_cap(params)) { + rc = elink_eee_initial_config(params, vars, SHMEM_EEE_10G_ADV); + if (rc != ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "Failed to configure EEE timers"); + elink_8483x_disable_eee(phy, params, vars); + return rc; + } + + if ((phy->req_duplex == DUPLEX_FULL) && + (params->eee_mode & ELINK_EEE_MODE_ADV_LPI) && + (elink_eee_calc_timer(params) || + !(params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI))) + rc = elink_8483x_enable_eee(phy, params, vars); + else + rc = elink_8483x_disable_eee(phy, params, vars); + if (rc != ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "Failed to set EEE advertisement"); + return rc; + } + } else { + vars->eee_status &= ~SHMEM_EEE_SUPPORTED_MASK; + } + + if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) || + (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) { + /* Bring PHY out of super isolate mode as the final step. */ + elink_cl45_read_and_write(sc, phy, + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, + (uint16_t) ~ + MDIO_84833_SUPER_ISOLATE); + } + return rc; +} + +static uint8_t elink_848xx_read_status(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val, val1, val2; + uint8_t link_up = 0; + + /* Check 10G-BaseT link status */ + /* Check PMD signal ok */ + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, 0xFFFA, &val1); + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL, &val2); + PMD_DRV_LOG(DEBUG, "BNX2X848xx: PMD_SIGNAL 1.a811 = 0x%x", val2); + + /* Check link 10G */ + if (val2 & (1 << 11)) { + vars->line_speed = ELINK_SPEED_10000; + vars->duplex = DUPLEX_FULL; + link_up = 1; + elink_ext_phy_10G_an_resolve(sc, phy, vars); + } else { /* Check Legacy speed link */ + uint16_t legacy_status, legacy_speed, mii_ctrl; + + /* Enable expansion register 0x42 (Operation mode status) */ + elink_cl45_write(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_ACCESS, 0xf42); + + /* Get legacy speed operation status */ + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, + &legacy_status); + + PMD_DRV_LOG(DEBUG, "Legacy speed status = 0x%x", legacy_status); + link_up = ((legacy_status & (1 << 11)) == (1 << 11)); + legacy_speed = (legacy_status & (3 << 9)); + if (legacy_speed == (0 << 9)) + vars->line_speed = ELINK_SPEED_10; + else if (legacy_speed == (1 << 9)) + vars->line_speed = ELINK_SPEED_100; + else if (legacy_speed == (2 << 9)) + vars->line_speed = ELINK_SPEED_1000; + else { /* Should not happen: Treat as link down */ + vars->line_speed = 0; + link_up = 0; + } + + if (params->feature_config_flags & + ELINK_FEATURE_CONFIG_IEEE_PHY_TEST) { + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_CTRL, + &mii_ctrl); + /* For IEEE testing, check for a fake link. */ + link_up |= ((mii_ctrl & 0x3040) == 0x40); + } + + if (link_up) { + if (legacy_status & (1 << 8)) + vars->duplex = DUPLEX_FULL; + else + vars->duplex = DUPLEX_HALF; + + PMD_DRV_LOG(DEBUG, + "Link is up in %dMbps, is_duplex_full= %d", + vars->line_speed, + (vars->duplex == DUPLEX_FULL)); + /* Check legacy speed AN resolution */ + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_MII_STATUS, + &val); + if (val & (1 << 5)) + vars->link_status |= + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, + MDIO_AN_REG_8481_LEGACY_AN_EXPANSION, + &val); + if ((val & (1 << 0)) == 0) + vars->link_status |= + LINK_STATUS_PARALLEL_DETECTION_USED; + } + } + if (link_up) { + PMD_DRV_LOG(DEBUG, "BNX2X848x3: link speed is %d", + vars->line_speed); + elink_ext_phy_resolve_fc(phy, params, vars); + + /* Read LP advertised speeds */ + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_CL37_FC_LP, &val); + if (val & (1 << 5)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10THD_CAPABLE; + if (val & (1 << 6)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE; + if (val & (1 << 7)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE; + if (val & (1 << 8)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE; + if (val & (1 << 9)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_100T4_CAPABLE; + + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_1000T_STATUS, &val); + + if (val & (1 << 10)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE; + if (val & (1 << 11)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE; + + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_MASTER_STATUS, &val); + + if (val & (1 << 11)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + + /* Determine if EEE was negotiated */ + if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) || + (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) + elink_eee_an_resolve(phy, params, vars); + } + + return link_up; +} + +static elink_status_t elink_848xx_format_ver(uint32_t raw_ver, uint8_t * str, + uint16_t * len) +{ + elink_status_t status = ELINK_STATUS_OK; + uint32_t spirom_ver; + spirom_ver = ((raw_ver & 0xF80) >> 7) << 16 | (raw_ver & 0x7F); + status = elink_format_ver(spirom_ver, str, len); + return status; +} + +static void elink_8481_hw_reset(__rte_unused struct elink_phy *phy, + struct elink_params *params) +{ + elink_cb_gpio_write(params->sc, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, 0); + elink_cb_gpio_write(params->sc, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, 1); +} + +static void elink_8481_link_reset(struct elink_phy *phy, + struct elink_params *params) +{ + elink_cl45_write(params->sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x0000); + elink_cl45_write(params->sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1); +} + +static void elink_848x3_link_reset(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t port; + uint16_t val16; + + if (!(CHIP_IS_E1x(sc))) + port = SC_PATH(sc); + else + port = params->port; + + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823) { + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_3, + MISC_REGISTERS_GPIO_OUTPUT_LOW, port); + } else { + elink_cl45_read(sc, phy, + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val16); + val16 |= MDIO_84833_SUPER_ISOLATE; + elink_cl45_write(sc, phy, + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, val16); + } +} + +static void elink_848xx_set_link_led(struct elink_phy *phy, + struct elink_params *params, uint8_t mode) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val; + __rte_unused uint8_t port; + + if (!(CHIP_IS_E1x(sc))) + port = SC_PATH(sc); + else + port = params->port; + + switch (mode) { + case ELINK_LED_MODE_OFF: + + PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE OFF", port); + + if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY1) { + + /* Set LED masks */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, 0x0); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, 0x0); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, 0x0); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED5_MASK, 0x0); + + } else { + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, 0x0); + } + break; + case ELINK_LED_MODE_FRONT_PANEL_OFF: + + PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE FRONT PANEL OFF", port); + + if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY1) { + + /* Set LED masks */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, 0x0); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, 0x0); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, 0x0); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED5_MASK, 0x20); + + } else { + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, 0x0); + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) { + /* Disable MI_INT interrupt before setting LED4 + * source to constant off. + */ + if (REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + + params->port * 4) & + ELINK_NIG_MASK_MI_INT) { + params->link_flags |= + ELINK_LINK_FLAGS_INT_DISABLED; + + elink_bits_dis(sc, + NIG_REG_MASK_INTERRUPT_PORT0 + + params->port * 4, + ELINK_NIG_MASK_MI_INT); + } + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_SIGNAL_MASK, + 0x0); + } + } + break; + case ELINK_LED_MODE_ON: + + PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE ON", port); + + if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY1) { + /* Set control reg */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, &val); + val &= 0x8000; + val |= 0x2492; + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, val); + + /* Set LED masks */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, 0x0); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, 0x20); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, 0x20); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED5_MASK, 0x0); + } else { + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, 0x20); + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) { + /* Disable MI_INT interrupt before setting LED4 + * source to constant on. + */ + if (REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + + params->port * 4) & + ELINK_NIG_MASK_MI_INT) { + params->link_flags |= + ELINK_LINK_FLAGS_INT_DISABLED; + + elink_bits_dis(sc, + NIG_REG_MASK_INTERRUPT_PORT0 + + params->port * 4, + ELINK_NIG_MASK_MI_INT); + } + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_SIGNAL_MASK, + 0x20); + } + } + break; + + case ELINK_LED_MODE_OPER: + + PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE OPER", port); + + if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY1) { + + /* Set control reg */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, &val); + + if (!((val & + MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK) + >> + MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT)) + { + PMD_DRV_LOG(DEBUG, "Setting LINK_SIGNAL"); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, + 0xa492); + } + + /* Set LED masks */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, 0x10); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED2_MASK, 0x80); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED3_MASK, 0x98); + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED5_MASK, 0x40); + + } else { + /* EXTPHY2 LED mode indicate that the 100M/1G/10G LED + * sources are all wired through LED1, rather than only + * 10G in other modes. + */ + val = ((params->hw_led_mode << + SHARED_HW_CFG_LED_MODE_SHIFT) == + SHARED_HW_CFG_LED_EXTPHY2) ? 0x98 : 0x80; + + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LED1_MASK, val); + + /* Tell LED3 to blink on source */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, &val); + val &= ~(7 << 6); + val |= (1 << 6); /* A83B[8:6]= 1 */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_LINK_SIGNAL, val); + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834) { + /* Restore LED4 source to external link, + * and re-enable interrupts. + */ + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8481_SIGNAL_MASK, + 0x40); + if (params->link_flags & + ELINK_LINK_FLAGS_INT_DISABLED) { + elink_link_int_enable(params); + params->link_flags &= + ~ELINK_LINK_FLAGS_INT_DISABLED; + } + } + } + break; + } + + /* This is a workaround for E3+84833 until autoneg + * restart is fixed in f/w + */ + if (CHIP_IS_E3(sc)) { + elink_cl45_read(sc, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_GP2_STATUS_GP_2_1, &val); + } +} + +/******************************************************************/ +/* 54618SE PHY SECTION */ +/******************************************************************/ +static void elink_54618se_specific_func(struct elink_phy *phy, + struct elink_params *params, + uint32_t action) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t temp; + switch (action) { + case ELINK_PHY_INIT: + /* Configure LED4: set to INTR (0x6). */ + /* Accessing shadow register 0xe. */ + elink_cl22_write(sc, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_LED_SEL2); + elink_cl22_read(sc, phy, MDIO_REG_GPHY_SHADOW, &temp); + temp &= ~(0xf << 4); + temp |= (0x6 << 4); + elink_cl22_write(sc, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_WR_ENA | temp); + /* Configure INTR based on link status change. */ + elink_cl22_write(sc, phy, + MDIO_REG_INTR_MASK, + ~MDIO_REG_INTR_MASK_LINK_STATUS); + break; + } +} + +static elink_status_t elink_54618se_config_init(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t port; + uint16_t autoneg_val, an_1000_val, an_10_100_val, fc_val, temp; + uint32_t cfg_pin; + + PMD_DRV_LOG(DEBUG, "54618SE cfg init"); + DELAY(1000 * 1); + + /* This works with E3 only, no need to check the chip + * before determining the port. + */ + port = params->port; + + cfg_pin = (REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port]. + e3_cmn_pin_cfg)) & + PORT_HW_CFG_E3_PHY_RESET_MASK) >> + PORT_HW_CFG_E3_PHY_RESET_SHIFT; + + /* Drive pin high to bring the GPHY out of reset. */ + elink_set_cfg_pin(sc, cfg_pin, 1); + + /* wait for GPHY to reset */ + DELAY(1000 * 50); + + /* reset phy */ + elink_cl22_write(sc, phy, MDIO_PMA_REG_CTRL, 0x8000); + elink_wait_reset_complete(sc, phy, params); + + /* Wait for GPHY to reset */ + DELAY(1000 * 50); + + elink_54618se_specific_func(phy, params, ELINK_PHY_INIT); + /* Flip the signal detect polarity (set 0x1c.0x1e[8]). */ + elink_cl22_write(sc, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_AUTO_DET_MED); + elink_cl22_read(sc, phy, MDIO_REG_GPHY_SHADOW, &temp); + temp |= MDIO_REG_GPHY_SHADOW_INVERT_FIB_SD; + elink_cl22_write(sc, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_WR_ENA | temp); + + /* Set up fc */ + /* Please refer to Table 28B-3 of 802.3ab-1999 spec. */ + elink_calc_ieee_aneg_adv(phy, params, &vars->ieee_fc); + fc_val = 0; + if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC) + fc_val |= MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC; + + if ((vars->ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) == + MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) + fc_val |= MDIO_AN_REG_ADV_PAUSE_PAUSE; + + /* Read all advertisement */ + elink_cl22_read(sc, phy, 0x09, &an_1000_val); + + elink_cl22_read(sc, phy, 0x04, &an_10_100_val); + + elink_cl22_read(sc, phy, MDIO_PMA_REG_CTRL, &autoneg_val); + + /* Disable forced speed */ + autoneg_val &= + ~((1 << 6) | (1 << 8) | (1 << 9) | (1 << 12) | (1 << 13)); + an_10_100_val &= + ~((1 << 5) | (1 << 6) | (1 << 7) | (1 << 8) | (1 << 10) | + (1 << 11)); + + if (((phy->req_line_speed == ELINK_SPEED_AUTO_NEG) && + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (phy->req_line_speed == ELINK_SPEED_1000)) { + an_1000_val |= (1 << 8); + autoneg_val |= (1 << 9 | 1 << 12); + if (phy->req_duplex == DUPLEX_FULL) + an_1000_val |= (1 << 9); + PMD_DRV_LOG(DEBUG, "Advertising 1G"); + } else + an_1000_val &= ~((1 << 8) | (1 << 9)); + + elink_cl22_write(sc, phy, 0x09, an_1000_val); + elink_cl22_read(sc, phy, 0x09, &an_1000_val); + + /* Advertise 10/100 link speed */ + if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG) { + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) { + an_10_100_val |= (1 << 5); + autoneg_val |= (1 << 9 | 1 << 12); + PMD_DRV_LOG(DEBUG, "Advertising 10M-HD"); + } + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) { + an_10_100_val |= (1 << 6); + autoneg_val |= (1 << 9 | 1 << 12); + PMD_DRV_LOG(DEBUG, "Advertising 10M-FD"); + } + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { + an_10_100_val |= (1 << 7); + autoneg_val |= (1 << 9 | 1 << 12); + PMD_DRV_LOG(DEBUG, "Advertising 100M-HD"); + } + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { + an_10_100_val |= (1 << 8); + autoneg_val |= (1 << 9 | 1 << 12); + PMD_DRV_LOG(DEBUG, "Advertising 100M-FD"); + } + } + + /* Only 10/100 are allowed to work in FORCE mode */ + if (phy->req_line_speed == ELINK_SPEED_100) { + autoneg_val |= (1 << 13); + /* Enabled AUTO-MDIX when autoneg is disabled */ + elink_cl22_write(sc, phy, 0x18, (1 << 15 | 1 << 9 | 7 << 0)); + PMD_DRV_LOG(DEBUG, "Setting 100M force"); + } + if (phy->req_line_speed == ELINK_SPEED_10) { + /* Enabled AUTO-MDIX when autoneg is disabled */ + elink_cl22_write(sc, phy, 0x18, (1 << 15 | 1 << 9 | 7 << 0)); + PMD_DRV_LOG(DEBUG, "Setting 10M force"); + } + + if ((phy->flags & ELINK_FLAGS_EEE) && elink_eee_has_cap(params)) { + elink_status_t rc; + + elink_cl22_write(sc, phy, MDIO_REG_GPHY_EXP_ACCESS, + MDIO_REG_GPHY_EXP_ACCESS_TOP | + MDIO_REG_GPHY_EXP_TOP_2K_BUF); + elink_cl22_read(sc, phy, MDIO_REG_GPHY_EXP_ACCESS_GATE, &temp); + temp &= 0xfffe; + elink_cl22_write(sc, phy, MDIO_REG_GPHY_EXP_ACCESS_GATE, temp); + + rc = elink_eee_initial_config(params, vars, SHMEM_EEE_1G_ADV); + if (rc != ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "Failed to configure EEE timers"); + elink_eee_disable(phy, params, vars); + } else if ((params->eee_mode & ELINK_EEE_MODE_ADV_LPI) && + (phy->req_duplex == DUPLEX_FULL) && + (elink_eee_calc_timer(params) || + !(params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI))) { + /* Need to advertise EEE only when requested, + * and either no LPI assertion was requested, + * or it was requested and a valid timer was set. + * Also notice full duplex is required for EEE. + */ + elink_eee_advertise(phy, params, vars, + SHMEM_EEE_1G_ADV); + } else { + PMD_DRV_LOG(DEBUG, "Don't Advertise 1GBase-T EEE"); + elink_eee_disable(phy, params, vars); + } + } else { + vars->eee_status &= ~SHMEM_EEE_1G_ADV << + SHMEM_EEE_SUPPORTED_SHIFT; + + if (phy->flags & ELINK_FLAGS_EEE) { + /* Handle legacy auto-grEEEn */ + if (params->feature_config_flags & + ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED) { + temp = 6; + PMD_DRV_LOG(DEBUG, "Enabling Auto-GrEEEn"); + } else { + temp = 0; + PMD_DRV_LOG(DEBUG, "Don't Adv. EEE"); + } + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_EEE_ADV, temp); + } + } + + elink_cl22_write(sc, phy, 0x04, an_10_100_val | fc_val); + + if (phy->req_duplex == DUPLEX_FULL) + autoneg_val |= (1 << 8); + + elink_cl22_write(sc, phy, MDIO_PMA_REG_CTRL, autoneg_val); + + return ELINK_STATUS_OK; +} + +static void elink_5461x_set_link_led(struct elink_phy *phy, + struct elink_params *params, uint8_t mode) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t temp; + + elink_cl22_write(sc, phy, + MDIO_REG_GPHY_SHADOW, MDIO_REG_GPHY_SHADOW_LED_SEL1); + elink_cl22_read(sc, phy, MDIO_REG_GPHY_SHADOW, &temp); + temp &= 0xff00; + + PMD_DRV_LOG(DEBUG, "54618x set link led (mode=%x)", mode); + switch (mode) { + case ELINK_LED_MODE_FRONT_PANEL_OFF: + case ELINK_LED_MODE_OFF: + temp |= 0x00ee; + break; + case ELINK_LED_MODE_OPER: + temp |= 0x0001; + break; + case ELINK_LED_MODE_ON: + temp |= 0x00ff; + break; + default: + break; + } + elink_cl22_write(sc, phy, + MDIO_REG_GPHY_SHADOW, + MDIO_REG_GPHY_SHADOW_WR_ENA | temp); + return; +} + +static void elink_54618se_link_reset(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t cfg_pin; + uint8_t port; + + /* In case of no EPIO routed to reset the GPHY, put it + * in low power mode. + */ + elink_cl22_write(sc, phy, MDIO_PMA_REG_CTRL, 0x800); + /* This works with E3 only, no need to check the chip + * before determining the port. + */ + port = params->port; + cfg_pin = (REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port]. + e3_cmn_pin_cfg)) & + PORT_HW_CFG_E3_PHY_RESET_MASK) >> + PORT_HW_CFG_E3_PHY_RESET_SHIFT; + + /* Drive pin low to put GPHY in reset. */ + elink_set_cfg_pin(sc, cfg_pin, 0); +} + +static uint8_t elink_54618se_read_status(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val; + uint8_t link_up = 0; + uint16_t legacy_status, legacy_speed; + + /* Get speed operation status */ + elink_cl22_read(sc, phy, MDIO_REG_GPHY_AUX_STATUS, &legacy_status); + PMD_DRV_LOG(DEBUG, "54618SE read_status: 0x%x", legacy_status); + + /* Read status to clear the PHY interrupt. */ + elink_cl22_read(sc, phy, MDIO_REG_INTR_STATUS, &val); + + link_up = ((legacy_status & (1 << 2)) == (1 << 2)); + + if (link_up) { + legacy_speed = (legacy_status & (7 << 8)); + if (legacy_speed == (7 << 8)) { + vars->line_speed = ELINK_SPEED_1000; + vars->duplex = DUPLEX_FULL; + } else if (legacy_speed == (6 << 8)) { + vars->line_speed = ELINK_SPEED_1000; + vars->duplex = DUPLEX_HALF; + } else if (legacy_speed == (5 << 8)) { + vars->line_speed = ELINK_SPEED_100; + vars->duplex = DUPLEX_FULL; + } + /* Omitting 100Base-T4 for now */ + else if (legacy_speed == (3 << 8)) { + vars->line_speed = ELINK_SPEED_100; + vars->duplex = DUPLEX_HALF; + } else if (legacy_speed == (2 << 8)) { + vars->line_speed = ELINK_SPEED_10; + vars->duplex = DUPLEX_FULL; + } else if (legacy_speed == (1 << 8)) { + vars->line_speed = ELINK_SPEED_10; + vars->duplex = DUPLEX_HALF; + } else /* Should not happen */ + vars->line_speed = 0; + + PMD_DRV_LOG(DEBUG, + "Link is up in %dMbps, is_duplex_full= %d", + vars->line_speed, (vars->duplex == DUPLEX_FULL)); + + /* Check legacy speed AN resolution */ + elink_cl22_read(sc, phy, 0x01, &val); + if (val & (1 << 5)) + vars->link_status |= + LINK_STATUS_AUTO_NEGOTIATE_COMPLETE; + elink_cl22_read(sc, phy, 0x06, &val); + if ((val & (1 << 0)) == 0) + vars->link_status |= + LINK_STATUS_PARALLEL_DETECTION_USED; + + PMD_DRV_LOG(DEBUG, "BNX2X54618SE: link speed is %d", + vars->line_speed); + + elink_ext_phy_resolve_fc(phy, params, vars); + + if (vars->link_status & LINK_STATUS_AUTO_NEGOTIATE_COMPLETE) { + /* Report LP advertised speeds */ + elink_cl22_read(sc, phy, 0x5, &val); + + if (val & (1 << 5)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10THD_CAPABLE; + if (val & (1 << 6)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10TFD_CAPABLE; + if (val & (1 << 7)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_100TXHD_CAPABLE; + if (val & (1 << 8)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_100TXFD_CAPABLE; + if (val & (1 << 9)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_100T4_CAPABLE; + + elink_cl22_read(sc, phy, 0xa, &val); + if (val & (1 << 10)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000THD_CAPABLE; + if (val & (1 << 11)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_1000TFD_CAPABLE; + + if ((phy->flags & ELINK_FLAGS_EEE) && + elink_eee_has_cap(params)) + elink_eee_an_resolve(phy, params, vars); + } + } + return link_up; +} + +static void elink_54618se_config_loopback(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t val; + uint32_t umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; + + PMD_DRV_LOG(DEBUG, "2PMA/PMD ext_phy_loopback: 54618se"); + + /* Enable master/slave manual mmode and set to master */ + /* mii write 9 [bits set 11 12] */ + elink_cl22_write(sc, phy, 0x09, 3 << 11); + + /* forced 1G and disable autoneg */ + /* set val [mii read 0] */ + /* set val [expr $val & [bits clear 6 12 13]] */ + /* set val [expr $val | [bits set 6 8]] */ + /* mii write 0 $val */ + elink_cl22_read(sc, phy, 0x00, &val); + val &= ~((1 << 6) | (1 << 12) | (1 << 13)); + val |= (1 << 6) | (1 << 8); + elink_cl22_write(sc, phy, 0x00, val); + + /* Set external loopback and Tx using 6dB coding */ + /* mii write 0x18 7 */ + /* set val [mii read 0x18] */ + /* mii write 0x18 [expr $val | [bits set 10 15]] */ + elink_cl22_write(sc, phy, 0x18, 7); + elink_cl22_read(sc, phy, 0x18, &val); + elink_cl22_write(sc, phy, 0x18, val | (1 << 10) | (1 << 15)); + + /* This register opens the gate for the UMAC despite its name */ + REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + params->port * 4, 1); + + /* Maximum Frame Length (RW). Defines a 14-Bit maximum frame + * length used by the MAC receive logic to check frames. + */ + REG_WR(sc, umac_base + UMAC_REG_MAXFR, 0x2710); +} + +/******************************************************************/ +/* SFX7101 PHY SECTION */ +/******************************************************************/ +static void elink_7101_config_loopback(struct elink_phy *phy, + struct elink_params *params) +{ + struct bnx2x_softc *sc = params->sc; + /* SFX7101_XGXS_TEST1 */ + elink_cl45_write(sc, phy, + MDIO_XS_DEVAD, MDIO_XS_SFX7101_XGXS_TEST1, 0x100); +} + +static elink_status_t elink_7101_config_init(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + uint16_t fw_ver1, fw_ver2, val; + struct bnx2x_softc *sc = params->sc; + PMD_DRV_LOG(DEBUG, "Setting the SFX7101 LASI indication"); + + /* Restore normal power mode */ + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); + /* HW reset */ + elink_ext_phy_hw_reset(sc, params->port); + elink_wait_reset_complete(sc, phy, params); + + elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x1); + PMD_DRV_LOG(DEBUG, "Setting the SFX7101 LED to blink on traffic"); + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LED_CNTL, (1 << 3)); + + elink_ext_phy_set_pause(params, phy, vars); + /* Restart autoneg */ + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, &val); + val |= 0x200; + elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, val); + + /* Save spirom version */ + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER1, &fw_ver1); + + elink_cl45_read(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_7101_VER2, &fw_ver2); + elink_save_spirom_version(sc, params->port, + (uint32_t) (fw_ver1 << 16 | fw_ver2), + phy->ver_addr); + return ELINK_STATUS_OK; +} + +static uint8_t elink_7101_read_status(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t link_up; + uint16_t val1, val2; + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2); + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); + PMD_DRV_LOG(DEBUG, "10G-base-T LASI status 0x%x->0x%x", val2, val1); + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); + elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); + PMD_DRV_LOG(DEBUG, "10G-base-T PMA status 0x%x->0x%x", val2, val1); + link_up = ((val1 & 4) == 4); + /* If link is up print the AN outcome of the SFX7101 PHY */ + if (link_up) { + elink_cl45_read(sc, phy, + MDIO_AN_DEVAD, MDIO_AN_REG_MASTER_STATUS, + &val2); + vars->line_speed = ELINK_SPEED_10000; + vars->duplex = DUPLEX_FULL; + PMD_DRV_LOG(DEBUG, "SFX7101 AN status 0x%x->Master=%x", + val2, (val2 & (1 << 14))); + elink_ext_phy_10G_an_resolve(sc, phy, vars); + elink_ext_phy_resolve_fc(phy, params, vars); + + /* Read LP advertised speeds */ + if (val2 & (1 << 11)) + vars->link_status |= + LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; + } + return link_up; +} + +static elink_status_t elink_7101_format_ver(uint32_t spirom_ver, uint8_t * str, + uint16_t * len) +{ + if (*len < 5) + return ELINK_STATUS_ERROR; + str[0] = (spirom_ver & 0xFF); + str[1] = (spirom_ver & 0xFF00) >> 8; + str[2] = (spirom_ver & 0xFF0000) >> 16; + str[3] = (spirom_ver & 0xFF000000) >> 24; + str[4] = '\0'; + *len -= 5; + return ELINK_STATUS_OK; +} + +static void elink_7101_hw_reset(__rte_unused struct elink_phy *phy, + struct elink_params *params) +{ + /* Low power mode is controlled by GPIO 2 */ + elink_cb_gpio_write(params->sc, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port); + /* The PHY reset is controlled by GPIO 1 */ + elink_cb_gpio_write(params->sc, MISC_REGISTERS_GPIO_1, + MISC_REGISTERS_GPIO_OUTPUT_LOW, params->port); +} + +static void elink_7101_set_link_led(struct elink_phy *phy, + struct elink_params *params, uint8_t mode) +{ + uint16_t val = 0; + struct bnx2x_softc *sc = params->sc; + switch (mode) { + case ELINK_LED_MODE_FRONT_PANEL_OFF: + case ELINK_LED_MODE_OFF: + val = 2; + break; + case ELINK_LED_MODE_ON: + val = 1; + break; + case ELINK_LED_MODE_OPER: + val = 0; + break; + } + elink_cl45_write(sc, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LINK_LED_CNTL, val); +} + +/******************************************************************/ +/* STATIC PHY DECLARATION */ +/******************************************************************/ + +static const struct elink_phy phy_null = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN, + .addr = 0, + .def_md_devad = 0, + .flags = ELINK_FLAGS_INIT_XGXS_FIRST, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = 0, + .media_type = ELINK_ETH_PHY_NOT_PRESENT, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) NULL, + .read_status = (read_status_t) NULL, + .link_reset = (link_reset_t) NULL, + .config_loopback = (config_loopback_t) NULL, + .format_fw_ver = (format_fw_ver_t) NULL, + .hw_reset = (hw_reset_t) NULL, + .set_link_led = (set_link_led_t) NULL, + .phy_specific_func = (phy_specific_func_t) NULL +}; + +static const struct elink_phy phy_serdes = { + .type = PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT, + .addr = 0xff, + .def_md_devad = 0, + .flags = 0, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_10baseT_Half | + ELINK_SUPPORTED_10baseT_Full | + ELINK_SUPPORTED_100baseT_Half | + ELINK_SUPPORTED_100baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_2500baseX_Full | + ELINK_SUPPORTED_TP | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) elink_xgxs_config_init, + .read_status = (read_status_t) elink_link_settings_status, + .link_reset = (link_reset_t) elink_int_link_reset, + .config_loopback = (config_loopback_t) NULL, + .format_fw_ver = (format_fw_ver_t) NULL, + .hw_reset = (hw_reset_t) NULL, + .set_link_led = (set_link_led_t) NULL, + .phy_specific_func = (phy_specific_func_t) NULL +}; + +static const struct elink_phy phy_xgxs = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, + .addr = 0xff, + .def_md_devad = 0, + .flags = 0, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_10baseT_Half | + ELINK_SUPPORTED_10baseT_Full | + ELINK_SUPPORTED_100baseT_Half | + ELINK_SUPPORTED_100baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_2500baseX_Full | + ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_CX4, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) elink_xgxs_config_init, + .read_status = (read_status_t) elink_link_settings_status, + .link_reset = (link_reset_t) elink_int_link_reset, + .config_loopback = (config_loopback_t) elink_set_xgxs_loopback, + .format_fw_ver = (format_fw_ver_t) NULL, + .hw_reset = (hw_reset_t) NULL, + .set_link_led = (set_link_led_t) NULL, + .phy_specific_func = (phy_specific_func_t) elink_xgxs_specific_func +}; + +static const struct elink_phy phy_warpcore = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, + .addr = 0xff, + .def_md_devad = 0, + .flags = ELINK_FLAGS_TX_ERROR_CHECK, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_10baseT_Half | + ELINK_SUPPORTED_10baseT_Full | + ELINK_SUPPORTED_100baseT_Half | + ELINK_SUPPORTED_100baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_20000baseKR2_Full | + ELINK_SUPPORTED_20000baseMLD2_Full | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_UNSPECIFIED, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + /* req_duplex = */ 0, + /* rsrv = */ 0, + .config_init = (config_init_t) elink_warpcore_config_init, + .read_status = (read_status_t) elink_warpcore_read_status, + .link_reset = (link_reset_t) elink_warpcore_link_reset, + .config_loopback = (config_loopback_t) elink_set_warpcore_loopback, + .format_fw_ver = (format_fw_ver_t) NULL, + .hw_reset = (hw_reset_t) elink_warpcore_hw_reset, + .set_link_led = (set_link_led_t) NULL, + .phy_specific_func = (phy_specific_func_t) NULL +}; + +static const struct elink_phy phy_7101 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101, + .addr = 0xff, + .def_md_devad = 0, + .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_TP | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) elink_7101_config_init, + .read_status = (read_status_t) elink_7101_read_status, + .link_reset = (link_reset_t) elink_common_ext_link_reset, + .config_loopback = (config_loopback_t) elink_7101_config_loopback, + .format_fw_ver = (format_fw_ver_t) elink_7101_format_ver, + .hw_reset = (hw_reset_t) elink_7101_hw_reset, + .set_link_led = (set_link_led_t) elink_7101_set_link_led, + .phy_specific_func = (phy_specific_func_t) NULL +}; + +static const struct elink_phy phy_8073 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8073, + .addr = 0xff, + .def_md_devad = 0, + .flags = 0, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_2500baseX_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_KR, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) elink_8073_config_init, + .read_status = (read_status_t) elink_8073_read_status, + .link_reset = (link_reset_t) elink_8073_link_reset, + .config_loopback = (config_loopback_t) NULL, + .format_fw_ver = (format_fw_ver_t) elink_format_ver, + .hw_reset = (hw_reset_t) NULL, + .set_link_led = (set_link_led_t) NULL, + .phy_specific_func = (phy_specific_func_t) elink_8073_specific_func +}; + +static const struct elink_phy phy_8705 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8705, + .addr = 0xff, + .def_md_devad = 0, + .flags = ELINK_FLAGS_INIT_XGXS_FIRST, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_XFP_FIBER, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) elink_8705_config_init, + .read_status = (read_status_t) elink_8705_read_status, + .link_reset = (link_reset_t) elink_common_ext_link_reset, + .config_loopback = (config_loopback_t) NULL, + .format_fw_ver = (format_fw_ver_t) elink_null_format_ver, + .hw_reset = (hw_reset_t) NULL, + .set_link_led = (set_link_led_t) NULL, + .phy_specific_func = (phy_specific_func_t) NULL +}; + +static const struct elink_phy phy_8706 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8706, + .addr = 0xff, + .def_md_devad = 0, + .flags = ELINK_FLAGS_INIT_XGXS_FIRST, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_SFPP_10G_FIBER, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) elink_8706_config_init, + .read_status = (read_status_t) elink_8706_read_status, + .link_reset = (link_reset_t) elink_common_ext_link_reset, + .config_loopback = (config_loopback_t) NULL, + .format_fw_ver = (format_fw_ver_t) elink_format_ver, + .hw_reset = (hw_reset_t) NULL, + .set_link_led = (set_link_led_t) NULL, + .phy_specific_func = (phy_specific_func_t) NULL +}; + +static const struct elink_phy phy_8726 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726, + .addr = 0xff, + .def_md_devad = 0, + .flags = (ELINK_FLAGS_INIT_XGXS_FIRST | ELINK_FLAGS_TX_ERROR_CHECK), + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_NOT_PRESENT, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) elink_8726_config_init, + .read_status = (read_status_t) elink_8726_read_status, + .link_reset = (link_reset_t) elink_8726_link_reset, + .config_loopback = (config_loopback_t) elink_8726_config_loopback, + .format_fw_ver = (format_fw_ver_t) elink_format_ver, + .hw_reset = (hw_reset_t) NULL, + .set_link_led = (set_link_led_t) NULL, + .phy_specific_func = (phy_specific_func_t) NULL +}; + +static const struct elink_phy phy_8727 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727, + .addr = 0xff, + .def_md_devad = 0, + .flags = (ELINK_FLAGS_FAN_FAILURE_DET_REQ | ELINK_FLAGS_TX_ERROR_CHECK), + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_NOT_PRESENT, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) elink_8727_config_init, + .read_status = (read_status_t) elink_8727_read_status, + .link_reset = (link_reset_t) elink_8727_link_reset, + .config_loopback = (config_loopback_t) NULL, + .format_fw_ver = (format_fw_ver_t) elink_format_ver, + .hw_reset = (hw_reset_t) elink_8727_hw_reset, + .set_link_led = (set_link_led_t) elink_8727_set_link_led, + .phy_specific_func = (phy_specific_func_t) elink_8727_specific_func +}; + +static const struct elink_phy phy_8481 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8481, + .addr = 0xff, + .def_md_devad = 0, + .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ | + ELINK_FLAGS_REARM_LATCH_SIGNAL, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_10baseT_Half | + ELINK_SUPPORTED_10baseT_Full | + ELINK_SUPPORTED_100baseT_Half | + ELINK_SUPPORTED_100baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_TP | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) elink_8481_config_init, + .read_status = (read_status_t) elink_848xx_read_status, + .link_reset = (link_reset_t) elink_8481_link_reset, + .config_loopback = (config_loopback_t) NULL, + .format_fw_ver = (format_fw_ver_t) elink_848xx_format_ver, + .hw_reset = (hw_reset_t) elink_8481_hw_reset, + .set_link_led = (set_link_led_t) elink_848xx_set_link_led, + .phy_specific_func = (phy_specific_func_t) NULL +}; + +static const struct elink_phy phy_84823 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823, + .addr = 0xff, + .def_md_devad = 0, + .flags = (ELINK_FLAGS_FAN_FAILURE_DET_REQ | + ELINK_FLAGS_REARM_LATCH_SIGNAL | ELINK_FLAGS_TX_ERROR_CHECK), + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_10baseT_Half | + ELINK_SUPPORTED_10baseT_Full | + ELINK_SUPPORTED_100baseT_Half | + ELINK_SUPPORTED_100baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_TP | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) elink_848x3_config_init, + .read_status = (read_status_t) elink_848xx_read_status, + .link_reset = (link_reset_t) elink_848x3_link_reset, + .config_loopback = (config_loopback_t) NULL, + .format_fw_ver = (format_fw_ver_t) elink_848xx_format_ver, + .hw_reset = (hw_reset_t) NULL, + .set_link_led = (set_link_led_t) elink_848xx_set_link_led, + .phy_specific_func = (phy_specific_func_t) elink_848xx_specific_func +}; + +static const struct elink_phy phy_84833 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833, + .addr = 0xff, + .def_md_devad = 0, + .flags = (ELINK_FLAGS_FAN_FAILURE_DET_REQ | + ELINK_FLAGS_REARM_LATCH_SIGNAL | + ELINK_FLAGS_TX_ERROR_CHECK | ELINK_FLAGS_TEMPERATURE), + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_100baseT_Half | + ELINK_SUPPORTED_100baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_TP | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) elink_848x3_config_init, + .read_status = (read_status_t) elink_848xx_read_status, + .link_reset = (link_reset_t) elink_848x3_link_reset, + .config_loopback = (config_loopback_t) NULL, + .format_fw_ver = (format_fw_ver_t) elink_848xx_format_ver, + .hw_reset = (hw_reset_t) elink_84833_hw_reset_phy, + .set_link_led = (set_link_led_t) elink_848xx_set_link_led, + .phy_specific_func = (phy_specific_func_t) elink_848xx_specific_func +}; + +static const struct elink_phy phy_84834 = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834, + .addr = 0xff, + .def_md_devad = 0, + .flags = ELINK_FLAGS_FAN_FAILURE_DET_REQ | + ELINK_FLAGS_REARM_LATCH_SIGNAL, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_100baseT_Half | + ELINK_SUPPORTED_100baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_TP | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + .req_duplex = 0, + .rsrv = 0, + .config_init = (config_init_t) elink_848x3_config_init, + .read_status = (read_status_t) elink_848xx_read_status, + .link_reset = (link_reset_t) elink_848x3_link_reset, + .config_loopback = (config_loopback_t) NULL, + .format_fw_ver = (format_fw_ver_t) elink_848xx_format_ver, + .hw_reset = (hw_reset_t) elink_84833_hw_reset_phy, + .set_link_led = (set_link_led_t) elink_848xx_set_link_led, + .phy_specific_func = (phy_specific_func_t) elink_848xx_specific_func +}; + +static const struct elink_phy phy_54618se = { + .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE, + .addr = 0xff, + .def_md_devad = 0, + .flags = ELINK_FLAGS_INIT_XGXS_FIRST, + .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, + .mdio_ctrl = 0, + .supported = (ELINK_SUPPORTED_10baseT_Half | + ELINK_SUPPORTED_10baseT_Full | + ELINK_SUPPORTED_100baseT_Half | + ELINK_SUPPORTED_100baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_TP | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_Pause | ELINK_SUPPORTED_Asym_Pause), + .media_type = ELINK_ETH_PHY_BASE_T, + .ver_addr = 0, + .req_flow_ctrl = 0, + .req_line_speed = 0, + .speed_cap_mask = 0, + /* req_duplex = */ 0, + /* rsrv = */ 0, + .config_init = (config_init_t) elink_54618se_config_init, + .read_status = (read_status_t) elink_54618se_read_status, + .link_reset = (link_reset_t) elink_54618se_link_reset, + .config_loopback = (config_loopback_t) elink_54618se_config_loopback, + .format_fw_ver = (format_fw_ver_t) NULL, + .hw_reset = (hw_reset_t) NULL, + .set_link_led = (set_link_led_t) elink_5461x_set_link_led, + .phy_specific_func = (phy_specific_func_t) elink_54618se_specific_func +}; + +/*****************************************************************/ +/* */ +/* Populate the phy according. Main function: elink_populate_phy */ +/* */ +/*****************************************************************/ + +static void elink_populate_preemphasis(struct bnx2x_softc *sc, + uint32_t shmem_base, + struct elink_phy *phy, uint8_t port, + uint8_t phy_index) +{ + /* Get the 4 lanes xgxs config rx and tx */ + uint32_t rx = 0, tx = 0, i; + for (i = 0; i < 2; i++) { + /* INT_PHY and ELINK_EXT_PHY1 share the same value location in + * the shmem. When num_phys is greater than 1, than this value + * applies only to ELINK_EXT_PHY1 + */ + if (phy_index == ELINK_INT_PHY || phy_index == ELINK_EXT_PHY1) { + rx = REG_RD(sc, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port]. + xgxs_config_rx[i << 1])); + + tx = REG_RD(sc, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port]. + xgxs_config_tx[i << 1])); + } else { + rx = REG_RD(sc, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port]. + xgxs_config2_rx[i << 1])); + + tx = REG_RD(sc, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port]. + xgxs_config2_rx[i << 1])); + } + + phy->rx_preemphasis[i << 1] = ((rx >> 16) & 0xffff); + phy->rx_preemphasis[(i << 1) + 1] = (rx & 0xffff); + + phy->tx_preemphasis[i << 1] = ((tx >> 16) & 0xffff); + phy->tx_preemphasis[(i << 1) + 1] = (tx & 0xffff); + } +} + +static uint32_t elink_get_ext_phy_config(struct bnx2x_softc *sc, + uint32_t shmem_base, uint8_t phy_index, + uint8_t port) +{ + uint32_t ext_phy_config = 0; + switch (phy_index) { + case ELINK_EXT_PHY1: + ext_phy_config = REG_RD(sc, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port]. + external_phy_config)); + break; + case ELINK_EXT_PHY2: + ext_phy_config = REG_RD(sc, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port]. + external_phy_config2)); + break; + default: + PMD_DRV_LOG(DEBUG, "Invalid phy_index %d", phy_index); + return ELINK_STATUS_ERROR; + } + + return ext_phy_config; +} + +static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc, + uint32_t shmem_base, uint8_t port, + struct elink_phy *phy) +{ + uint32_t phy_addr; + __rte_unused uint32_t chip_id; + uint32_t switch_cfg = (REG_RD(sc, shmem_base + + offsetof(struct shmem_region, + dev_info. + port_feature_config[port]. + link_config)) & + PORT_FEATURE_CONNECTED_SWITCH_MASK); + chip_id = + (REG_RD(sc, MISC_REG_CHIP_NUM) << 16) | + ((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12); + + PMD_DRV_LOG(DEBUG, ":chip_id = 0x%x", chip_id); + if (USES_WARPCORE(sc)) { + uint32_t serdes_net_if; + phy_addr = REG_RD(sc, MISC_REG_WC0_CTRL_PHY_ADDR); + *phy = phy_warpcore; + if (REG_RD(sc, MISC_REG_PORT4MODE_EN_OVWR) == 0x3) + phy->flags |= ELINK_FLAGS_4_PORT_MODE; + else + phy->flags &= ~ELINK_FLAGS_4_PORT_MODE; + /* Check Dual mode */ + serdes_net_if = (REG_RD(sc, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port]. + default_cfg)) & + PORT_HW_CFG_NET_SERDES_IF_MASK); + /* Set the appropriate supported and flags indications per + * interface type of the chip + */ + switch (serdes_net_if) { + case PORT_HW_CFG_NET_SERDES_IF_SGMII: + phy->supported &= (ELINK_SUPPORTED_10baseT_Half | + ELINK_SUPPORTED_10baseT_Full | + ELINK_SUPPORTED_100baseT_Half | + ELINK_SUPPORTED_100baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_Pause | + ELINK_SUPPORTED_Asym_Pause); + phy->media_type = ELINK_ETH_PHY_BASE_T; + break; + case PORT_HW_CFG_NET_SERDES_IF_XFI: + phy->supported &= (ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Pause | + ELINK_SUPPORTED_Asym_Pause); + phy->media_type = ELINK_ETH_PHY_XFP_FIBER; + break; + case PORT_HW_CFG_NET_SERDES_IF_SFI: + phy->supported &= (ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Pause | + ELINK_SUPPORTED_Asym_Pause); + phy->media_type = ELINK_ETH_PHY_SFPP_10G_FIBER; + break; + case PORT_HW_CFG_NET_SERDES_IF_KR: + phy->media_type = ELINK_ETH_PHY_KR; + phy->supported &= (ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_Pause | + ELINK_SUPPORTED_Asym_Pause); + break; + case PORT_HW_CFG_NET_SERDES_IF_DXGXS: + phy->media_type = ELINK_ETH_PHY_KR; + phy->flags |= ELINK_FLAGS_WC_DUAL_MODE; + phy->supported &= (ELINK_SUPPORTED_20000baseMLD2_Full | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Pause | + ELINK_SUPPORTED_Asym_Pause); + break; + case PORT_HW_CFG_NET_SERDES_IF_KR2: + phy->media_type = ELINK_ETH_PHY_KR; + phy->flags |= ELINK_FLAGS_WC_DUAL_MODE; + phy->supported &= (ELINK_SUPPORTED_20000baseKR2_Full | + ELINK_SUPPORTED_10000baseT_Full | + ELINK_SUPPORTED_1000baseT_Full | + ELINK_SUPPORTED_Autoneg | + ELINK_SUPPORTED_FIBRE | + ELINK_SUPPORTED_Pause | + ELINK_SUPPORTED_Asym_Pause); + phy->flags &= ~ELINK_FLAGS_TX_ERROR_CHECK; + break; + default: + PMD_DRV_LOG(DEBUG, "Unknown WC interface type 0x%x", + serdes_net_if); + break; + } + + /* Enable MDC/MDIO work-around for E3 A0 since free running MDC + * was not set as expected. For B0, ECO will be enabled so there + * won't be an issue there + */ + if (CHIP_REV(sc) == CHIP_REV_Ax) + phy->flags |= ELINK_FLAGS_MDC_MDIO_WA; + else + phy->flags |= ELINK_FLAGS_MDC_MDIO_WA_B0; + } else { + switch (switch_cfg) { + case ELINK_SWITCH_CFG_1G: + phy_addr = REG_RD(sc, + NIG_REG_SERDES0_CTRL_PHY_ADDR + + port * 0x10); + *phy = phy_serdes; + break; + case ELINK_SWITCH_CFG_10G: + phy_addr = REG_RD(sc, + NIG_REG_XGXS0_CTRL_PHY_ADDR + + port * 0x18); + *phy = phy_xgxs; + break; + default: + PMD_DRV_LOG(DEBUG, "Invalid switch_cfg"); + return ELINK_STATUS_ERROR; + } + } + phy->addr = (uint8_t) phy_addr; + phy->mdio_ctrl = elink_get_emac_base(sc, + SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH, + port); + if (CHIP_IS_E2(sc)) + phy->def_md_devad = ELINK_E2_DEFAULT_PHY_DEV_ADDR; + else + phy->def_md_devad = ELINK_DEFAULT_PHY_DEV_ADDR; + + PMD_DRV_LOG(DEBUG, "Internal phy port=%d, addr=0x%x, mdio_ctl=0x%x", + port, phy->addr, phy->mdio_ctrl); + + elink_populate_preemphasis(sc, shmem_base, phy, port, ELINK_INT_PHY); + return ELINK_STATUS_OK; +} + +static elink_status_t elink_populate_ext_phy(struct bnx2x_softc *sc, + uint8_t phy_index, + uint32_t shmem_base, + uint32_t shmem2_base, + uint8_t port, + struct elink_phy *phy) +{ + uint32_t ext_phy_config, phy_type, config2; + uint32_t mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_BOTH; + ext_phy_config = elink_get_ext_phy_config(sc, shmem_base, + phy_index, port); + phy_type = ELINK_XGXS_EXT_PHY_TYPE(ext_phy_config); + /* Select the phy type */ + switch (phy_type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8073: + mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_SWAPPED; + *phy = phy_8073; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8705: + *phy = phy_8705; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8706: + *phy = phy_8706; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726: + mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1; + *phy = phy_8726; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727_NOC: + /* BNX2X8727_NOC => BNX2X8727 no over current */ + mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1; + *phy = phy_8727; + phy->flags |= ELINK_FLAGS_NOC; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727: + mdc_mdio_access = SHARED_HW_CFG_MDC_MDIO_ACCESS1_EMAC1; + *phy = phy_8727; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8481: + *phy = phy_8481; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84823: + *phy = phy_84823; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833: + *phy = phy_84833; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834: + *phy = phy_84834; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54616: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE: + *phy = phy_54618se; + if (phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X54618SE) + phy->flags |= ELINK_FLAGS_EEE; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101: + *phy = phy_7101; + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: + *phy = phy_null; + return ELINK_STATUS_ERROR; + default: + *phy = phy_null; + /* In case external PHY wasn't found */ + if ((phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && + (phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)) + return ELINK_STATUS_ERROR; + return ELINK_STATUS_OK; + } + + phy->addr = ELINK_XGXS_EXT_PHY_ADDR(ext_phy_config); + elink_populate_preemphasis(sc, shmem_base, phy, port, phy_index); + + /* The shmem address of the phy version is located on different + * structures. In case this structure is too old, do not set + * the address + */ + config2 = REG_RD(sc, shmem_base + offsetof(struct shmem_region, + dev_info.shared_hw_config. + config2)); + if (phy_index == ELINK_EXT_PHY1) { + phy->ver_addr = shmem_base + offsetof(struct shmem_region, + port_mb[port]. + ext_phy_fw_version); + + /* Check specific mdc mdio settings */ + if (config2 & SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK) + mdc_mdio_access = config2 & + SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK; + } else { + uint32_t size = REG_RD(sc, shmem2_base); + + if (size > offsetof(struct shmem2_region, ext_phy_fw_version2)) { + phy->ver_addr = shmem2_base + + offsetof(struct shmem2_region, + ext_phy_fw_version2[port]); + } + /* Check specific mdc mdio settings */ + if (config2 & SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK) + mdc_mdio_access = (config2 & + SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK) + >> (SHARED_HW_CFG_MDC_MDIO_ACCESS2_SHIFT - + SHARED_HW_CFG_MDC_MDIO_ACCESS1_SHIFT); + } + phy->mdio_ctrl = elink_get_emac_base(sc, mdc_mdio_access, port); + + if (((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) || + (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834)) && + (phy->ver_addr)) { + /* Remove 100Mb link supported for BNX2X84833/4 when phy fw + * version lower than or equal to 1.39 + */ + uint32_t raw_ver = REG_RD(sc, phy->ver_addr); + if (((raw_ver & 0x7F) <= 39) && (((raw_ver & 0xF80) >> 7) <= 1)) + phy->supported &= ~(ELINK_SUPPORTED_100baseT_Half | + ELINK_SUPPORTED_100baseT_Full); + } + + PMD_DRV_LOG(DEBUG, "phy_type 0x%x port %d found in index %d", + phy_type, port, phy_index); + PMD_DRV_LOG(DEBUG, " addr=0x%x, mdio_ctl=0x%x", + phy->addr, phy->mdio_ctrl); + return ELINK_STATUS_OK; +} + +static elink_status_t elink_populate_phy(struct bnx2x_softc *sc, + uint8_t phy_index, uint32_t shmem_base, + uint32_t shmem2_base, uint8_t port, + struct elink_phy *phy) +{ + elink_status_t status = ELINK_STATUS_OK; + phy->type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN; + if (phy_index == ELINK_INT_PHY) + return elink_populate_int_phy(sc, shmem_base, port, phy); + status = elink_populate_ext_phy(sc, phy_index, shmem_base, shmem2_base, + port, phy); + return status; +} + +static void elink_phy_def_cfg(struct elink_params *params, + struct elink_phy *phy, uint8_t phy_index) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t link_config; + /* Populate the default phy configuration for MF mode */ + if (phy_index == ELINK_EXT_PHY2) { + link_config = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_feature_config + [params->port].link_config2)); + phy->speed_cap_mask = + REG_RD(sc, + params->shmem_base + offsetof(struct shmem_region, + dev_info.port_hw_config + [params->port]. + speed_capability_mask2)); + } else { + link_config = REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_feature_config + [params->port].link_config)); + phy->speed_cap_mask = + REG_RD(sc, + params->shmem_base + offsetof(struct shmem_region, + dev_info.port_hw_config + [params->port]. + speed_capability_mask)); + } + + PMD_DRV_LOG(DEBUG, + "Default config phy idx %x cfg 0x%x speed_cap_mask 0x%x", + phy_index, link_config, phy->speed_cap_mask); + + phy->req_duplex = DUPLEX_FULL; + switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) { + case PORT_FEATURE_LINK_SPEED_10M_HALF: + phy->req_duplex = DUPLEX_HALF; + case PORT_FEATURE_LINK_SPEED_10M_FULL: + phy->req_line_speed = ELINK_SPEED_10; + break; + case PORT_FEATURE_LINK_SPEED_100M_HALF: + phy->req_duplex = DUPLEX_HALF; + case PORT_FEATURE_LINK_SPEED_100M_FULL: + phy->req_line_speed = ELINK_SPEED_100; + break; + case PORT_FEATURE_LINK_SPEED_1G: + phy->req_line_speed = ELINK_SPEED_1000; + break; + case PORT_FEATURE_LINK_SPEED_2_5G: + phy->req_line_speed = ELINK_SPEED_2500; + break; + case PORT_FEATURE_LINK_SPEED_10G_CX4: + phy->req_line_speed = ELINK_SPEED_10000; + break; + default: + phy->req_line_speed = ELINK_SPEED_AUTO_NEG; + break; + } + + switch (link_config & PORT_FEATURE_FLOW_CONTROL_MASK) { + case PORT_FEATURE_FLOW_CONTROL_AUTO: + phy->req_flow_ctrl = ELINK_FLOW_CTRL_AUTO; + break; + case PORT_FEATURE_FLOW_CONTROL_TX: + phy->req_flow_ctrl = ELINK_FLOW_CTRL_TX; + break; + case PORT_FEATURE_FLOW_CONTROL_RX: + phy->req_flow_ctrl = ELINK_FLOW_CTRL_RX; + break; + case PORT_FEATURE_FLOW_CONTROL_BOTH: + phy->req_flow_ctrl = ELINK_FLOW_CTRL_BOTH; + break; + default: + phy->req_flow_ctrl = ELINK_FLOW_CTRL_NONE; + break; + } +} + +uint32_t elink_phy_selection(struct elink_params *params) +{ + uint32_t phy_config_swapped, prio_cfg; + uint32_t return_cfg = PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT; + + phy_config_swapped = params->multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED; + + prio_cfg = params->multi_phy_config & PORT_HW_CFG_PHY_SELECTION_MASK; + + if (phy_config_swapped) { + switch (prio_cfg) { + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY: + return_cfg = + PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY; + break; + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY: + return_cfg = + PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY; + break; + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY: + return_cfg = PORT_HW_CFG_PHY_SELECTION_FIRST_PHY; + break; + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY: + return_cfg = PORT_HW_CFG_PHY_SELECTION_SECOND_PHY; + break; + } + } else + return_cfg = prio_cfg; + + return return_cfg; +} + +elink_status_t elink_phy_probe(struct elink_params * params) +{ + uint8_t phy_index, actual_phy_idx; + uint32_t phy_config_swapped, sync_offset, media_types; + struct bnx2x_softc *sc = params->sc; + struct elink_phy *phy; + params->num_phys = 0; + PMD_DRV_LOG(DEBUG, "Begin phy probe"); +#ifdef ELINK_INCLUDE_EMUL + if (CHIP_REV_IS_EMUL(sc)) + return ELINK_STATUS_OK; +#endif + phy_config_swapped = params->multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED; + + for (phy_index = ELINK_INT_PHY; phy_index < ELINK_MAX_PHYS; phy_index++) { + actual_phy_idx = phy_index; + if (phy_config_swapped) { + if (phy_index == ELINK_EXT_PHY1) + actual_phy_idx = ELINK_EXT_PHY2; + else if (phy_index == ELINK_EXT_PHY2) + actual_phy_idx = ELINK_EXT_PHY1; + } + PMD_DRV_LOG(DEBUG, "phy_config_swapped %x, phy_index %x," + " actual_phy_idx %x", phy_config_swapped, + phy_index, actual_phy_idx); + phy = ¶ms->phy[actual_phy_idx]; + if (elink_populate_phy(sc, phy_index, params->shmem_base, + params->shmem2_base, params->port, + phy) != ELINK_STATUS_OK) { + params->num_phys = 0; + PMD_DRV_LOG(DEBUG, "phy probe failed in phy index %d", + phy_index); + for (phy_index = ELINK_INT_PHY; + phy_index < ELINK_MAX_PHYS; phy_index++) + *phy = phy_null; + return ELINK_STATUS_ERROR; + } + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN) + break; + + if (params->feature_config_flags & + ELINK_FEATURE_CONFIG_DISABLE_REMOTE_FAULT_DET) + phy->flags &= ~ELINK_FLAGS_TX_ERROR_CHECK; + + if (!(params->feature_config_flags & + ELINK_FEATURE_CONFIG_MT_SUPPORT)) + phy->flags |= ELINK_FLAGS_MDC_MDIO_WA_G; + + sync_offset = params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].media_type); + media_types = REG_RD(sc, sync_offset); + + /* Update media type for non-PMF sync only for the first time + * In case the media type changes afterwards, it will be updated + * using the update_status function + */ + if ((media_types & (PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK << + (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * + actual_phy_idx))) == 0) { + media_types |= ((phy->media_type & + PORT_HW_CFG_MEDIA_TYPE_PHY0_MASK) << + (PORT_HW_CFG_MEDIA_TYPE_PHY1_SHIFT * + actual_phy_idx)); + } + REG_WR(sc, sync_offset, media_types); + + elink_phy_def_cfg(params, phy, phy_index); + params->num_phys++; + } + + PMD_DRV_LOG(DEBUG, "End phy probe. #phys found %x", params->num_phys); + return ELINK_STATUS_OK; +} + +#ifdef ELINK_INCLUDE_EMUL +static elink_status_t elink_init_e3_emul_mac(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + vars->line_speed = params->req_line_speed[0]; + /* In case link speed is auto, set speed the highest as possible */ + if (params->req_line_speed[0] == ELINK_SPEED_AUTO_NEG) { + if (params->feature_config_flags & + ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC) + vars->line_speed = ELINK_SPEED_2500; + else if (elink_is_4_port_mode(sc)) + vars->line_speed = ELINK_SPEED_10000; + else + vars->line_speed = ELINK_SPEED_20000; + } + if (vars->line_speed < ELINK_SPEED_10000) { + if ((params->feature_config_flags & + ELINK_FEATURE_CONFIG_EMUL_DISABLE_UMAC)) { + PMD_DRV_LOG(DEBUG, "Invalid line speed %d while UMAC is" + " disabled!", params->req_line_speed[0]); + return ELINK_STATUS_ERROR; + } + switch (vars->line_speed) { + case ELINK_SPEED_10: + vars->link_status = ELINK_LINK_10TFD; + break; + case ELINK_SPEED_100: + vars->link_status = ELINK_LINK_100TXFD; + break; + case ELINK_SPEED_1000: + vars->link_status = ELINK_LINK_1000TFD; + break; + case ELINK_SPEED_2500: + vars->link_status = ELINK_LINK_2500TFD; + break; + default: + PMD_DRV_LOG(DEBUG, "Invalid line speed %d for UMAC", + vars->line_speed); + return ELINK_STATUS_ERROR; + } + vars->link_status |= LINK_STATUS_LINK_UP; + + if (params->loopback_mode == ELINK_LOOPBACK_UMAC) + elink_umac_enable(params, vars, 1); + else + elink_umac_enable(params, vars, 0); + } else { + /* Link speed >= 10000 requires XMAC enabled */ + if (params->feature_config_flags & + ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC) { + PMD_DRV_LOG(DEBUG, "Invalid line speed %d while XMAC is" + " disabled!", params->req_line_speed[0]); + return ELINK_STATUS_ERROR; + } + /* Check link speed */ + switch (vars->line_speed) { + case ELINK_SPEED_10000: + vars->link_status = ELINK_LINK_10GTFD; + break; + case ELINK_SPEED_20000: + vars->link_status = ELINK_LINK_20GTFD; + break; + default: + PMD_DRV_LOG(DEBUG, "Invalid line speed %d for XMAC", + vars->line_speed); + return ELINK_STATUS_ERROR; + } + vars->link_status |= LINK_STATUS_LINK_UP; + if (params->loopback_mode == ELINK_LOOPBACK_XMAC) + elink_xmac_enable(params, vars, 1); + else + elink_xmac_enable(params, vars, 0); + } + return ELINK_STATUS_OK; +} + +static elink_status_t elink_init_emul(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + if (CHIP_IS_E3(sc)) { + if (elink_init_e3_emul_mac(params, vars) != ELINK_STATUS_OK) + return ELINK_STATUS_ERROR; + } else { + if (params->feature_config_flags & + ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC) { + vars->line_speed = ELINK_SPEED_1000; + vars->link_status = (LINK_STATUS_LINK_UP | + ELINK_LINK_1000XFD); + if (params->loopback_mode == ELINK_LOOPBACK_EMAC) + elink_emac_enable(params, vars, 1); + else + elink_emac_enable(params, vars, 0); + } else { + vars->line_speed = ELINK_SPEED_10000; + vars->link_status = (LINK_STATUS_LINK_UP | + ELINK_LINK_10GTFD); + if (params->loopback_mode == ELINK_LOOPBACK_BMAC) + elink_bmac_enable(params, vars, 1, 1); + else + elink_bmac_enable(params, vars, 0, 1); + } + } + vars->link_up = 1; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + + if (CHIP_IS_E1x(sc)) + elink_pbf_update(params, vars->flow_ctrl, vars->line_speed); + /* Disable drain */ + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0); + + /* update shared memory */ + elink_update_mng(params, vars->link_status); + return ELINK_STATUS_OK; +} +#endif +#ifdef ELINK_INCLUDE_FPGA +static elink_status_t elink_init_fpga(struct elink_params *params, + struct elink_vars *vars) +{ + /* Enable on E1.5 FPGA */ + struct bnx2x_softc *sc = params->sc; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + vars->flow_ctrl = (ELINK_FLOW_CTRL_TX | ELINK_FLOW_CTRL_RX); + vars->link_status |= (LINK_STATUS_TX_FLOW_CONTROL_ENABLED | + LINK_STATUS_RX_FLOW_CONTROL_ENABLED); + if (CHIP_IS_E3(sc)) { + vars->line_speed = params->req_line_speed[0]; + switch (vars->line_speed) { + case ELINK_SPEED_AUTO_NEG: + vars->line_speed = ELINK_SPEED_2500; + case ELINK_SPEED_2500: + vars->link_status = ELINK_LINK_2500TFD; + break; + case ELINK_SPEED_1000: + vars->link_status = ELINK_LINK_1000XFD; + break; + case ELINK_SPEED_100: + vars->link_status = ELINK_LINK_100TXFD; + break; + case ELINK_SPEED_10: + vars->link_status = ELINK_LINK_10TFD; + break; + default: + PMD_DRV_LOG(DEBUG, "Invalid link speed %d", + params->req_line_speed[0]); + return ELINK_STATUS_ERROR; + } + vars->link_status |= LINK_STATUS_LINK_UP; + if (params->loopback_mode == ELINK_LOOPBACK_UMAC) + elink_umac_enable(params, vars, 1); + else + elink_umac_enable(params, vars, 0); + } else { + vars->line_speed = ELINK_SPEED_10000; + vars->link_status = (LINK_STATUS_LINK_UP | ELINK_LINK_10GTFD); + if (params->loopback_mode == ELINK_LOOPBACK_EMAC) + elink_emac_enable(params, vars, 1); + else + elink_emac_enable(params, vars, 0); + } + vars->link_up = 1; + + if (CHIP_IS_E1x(sc)) + elink_pbf_update(params, vars->flow_ctrl, vars->line_speed); + /* Disable drain */ + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0); + + /* Update shared memory */ + elink_update_mng(params, vars->link_status); + return ELINK_STATUS_OK; +} +#endif +static void elink_init_bmac_loopback(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + vars->link_up = 1; + vars->line_speed = ELINK_SPEED_10000; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + vars->mac_type = ELINK_MAC_TYPE_BMAC; + + vars->phy_flags = PHY_XGXS_FLAG; + + elink_xgxs_deassert(params); + + /* Set bmac loopback */ + elink_bmac_enable(params, vars, 1, 1); + + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0); +} + +static void elink_init_emac_loopback(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + vars->link_up = 1; + vars->line_speed = ELINK_SPEED_1000; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + vars->mac_type = ELINK_MAC_TYPE_EMAC; + + vars->phy_flags = PHY_XGXS_FLAG; + + elink_xgxs_deassert(params); + /* Set bmac loopback */ + elink_emac_enable(params, vars, 1); + elink_emac_program(params, vars); + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0); +} + +static void elink_init_xmac_loopback(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + vars->link_up = 1; + if (!params->req_line_speed[0]) + vars->line_speed = ELINK_SPEED_10000; + else + vars->line_speed = params->req_line_speed[0]; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + vars->mac_type = ELINK_MAC_TYPE_XMAC; + vars->phy_flags = PHY_XGXS_FLAG; + /* Set WC to loopback mode since link is required to provide clock + * to the XMAC in 20G mode + */ + elink_set_aer_mmd(params, ¶ms->phy[0]); + elink_warpcore_reset_lane(sc, ¶ms->phy[0], 0); + params->phy[ELINK_INT_PHY].config_loopback(¶ms->phy[ELINK_INT_PHY], + params); + + elink_xmac_enable(params, vars, 1); + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0); +} + +static void elink_init_umac_loopback(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + vars->link_up = 1; + vars->line_speed = ELINK_SPEED_1000; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + vars->mac_type = ELINK_MAC_TYPE_UMAC; + vars->phy_flags = PHY_XGXS_FLAG; + elink_umac_enable(params, vars, 1); + + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0); +} + +static void elink_init_xgxs_loopback(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + struct elink_phy *int_phy = ¶ms->phy[ELINK_INT_PHY]; + vars->link_up = 1; + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + vars->duplex = DUPLEX_FULL; + if (params->req_line_speed[0] == ELINK_SPEED_1000) + vars->line_speed = ELINK_SPEED_1000; + else if ((params->req_line_speed[0] == ELINK_SPEED_20000) || + (int_phy->flags & ELINK_FLAGS_WC_DUAL_MODE)) + vars->line_speed = ELINK_SPEED_20000; + else + vars->line_speed = ELINK_SPEED_10000; + + if (!USES_WARPCORE(sc)) + elink_xgxs_deassert(params); + elink_link_initialize(params, vars); + + if (params->req_line_speed[0] == ELINK_SPEED_1000) { + if (USES_WARPCORE(sc)) + elink_umac_enable(params, vars, 0); + else { + elink_emac_program(params, vars); + elink_emac_enable(params, vars, 0); + } + } else { + if (USES_WARPCORE(sc)) + elink_xmac_enable(params, vars, 0); + else + elink_bmac_enable(params, vars, 0, 1); + } + + if (params->loopback_mode == ELINK_LOOPBACK_XGXS) { + /* Set 10G XGXS loopback */ + int_phy->config_loopback(int_phy, params); + } else { + /* Set external phy loopback */ + uint8_t phy_index; + for (phy_index = ELINK_EXT_PHY1; + phy_index < params->num_phys; phy_index++) + if (params->phy[phy_index].config_loopback) + params->phy[phy_index].config_loopback(¶ms-> + phy + [phy_index], + params); + } + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0); + + elink_set_led(params, vars, ELINK_LED_MODE_OPER, vars->line_speed); +} + +void elink_set_rx_filter(struct elink_params *params, uint8_t en) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t val = en * 0x1F; + + /* Open / close the gate between the NIG and the BRB */ + if (!CHIP_IS_E1x(sc)) + val |= en * 0x20; + REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK + params->port * 4, val); + + REG_WR(sc, NIG_REG_LLH0_BRB1_DRV_MASK_MF + params->port * 4, en * 0x3); + + REG_WR(sc, (params->port ? NIG_REG_LLH1_BRB1_NOT_MCP : + NIG_REG_LLH0_BRB1_NOT_MCP), en); +} + +static elink_status_t elink_avoid_link_flap(struct elink_params *params, + struct elink_vars *vars) +{ + uint32_t phy_idx; + uint32_t dont_clear_stat, lfa_sts; + struct bnx2x_softc *sc = params->sc; + + /* Sync the link parameters */ + elink_link_status_update(params, vars); + + /* + * The module verification was already done by previous link owner, + * so this call is meant only to get warning message + */ + + for (phy_idx = ELINK_INT_PHY; phy_idx < params->num_phys; phy_idx++) { + struct elink_phy *phy = ¶ms->phy[phy_idx]; + if (phy->phy_specific_func) { + PMD_DRV_LOG(DEBUG, "Calling PHY specific func"); + phy->phy_specific_func(phy, params, ELINK_PHY_INIT); + } + if ((phy->media_type == ELINK_ETH_PHY_SFPP_10G_FIBER) || + (phy->media_type == ELINK_ETH_PHY_SFP_1G_FIBER) || + (phy->media_type == ELINK_ETH_PHY_DA_TWINAX)) + elink_verify_sfp_module(phy, params); + } + lfa_sts = REG_RD(sc, params->lfa_base + + offsetof(struct shmem_lfa, lfa_sts)); + + dont_clear_stat = lfa_sts & SHMEM_LFA_DONT_CLEAR_STAT; + + /* Re-enable the NIG/MAC */ + if (CHIP_IS_E3(sc)) { + if (!dont_clear_stat) { + REG_WR(sc, GRCBASE_MISC + + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_MSTAT0 << + params->port)); + REG_WR(sc, GRCBASE_MISC + + MISC_REGISTERS_RESET_REG_2_SET, + (MISC_REGISTERS_RESET_REG_2_MSTAT0 << + params->port)); + } + if (vars->line_speed < ELINK_SPEED_10000) + elink_umac_enable(params, vars, 0); + else + elink_xmac_enable(params, vars, 0); + } else { + if (vars->line_speed < ELINK_SPEED_10000) + elink_emac_enable(params, vars, 0); + else + elink_bmac_enable(params, vars, 0, !dont_clear_stat); + } + + /* Increment LFA count */ + lfa_sts = ((lfa_sts & ~LINK_FLAP_AVOIDANCE_COUNT_MASK) | + (((((lfa_sts & LINK_FLAP_AVOIDANCE_COUNT_MASK) >> + LINK_FLAP_AVOIDANCE_COUNT_OFFSET) + 1) & 0xff) + << LINK_FLAP_AVOIDANCE_COUNT_OFFSET)); + /* Clear link flap reason */ + lfa_sts &= ~LFA_LINK_FLAP_REASON_MASK; + + REG_WR(sc, params->lfa_base + + offsetof(struct shmem_lfa, lfa_sts), lfa_sts); + + /* Disable NIG DRAIN */ + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0); + + /* Enable interrupts */ + elink_link_int_enable(params); + return ELINK_STATUS_OK; +} + +static void elink_cannot_avoid_link_flap(struct elink_params *params, + struct elink_vars *vars, + int lfa_status) +{ + uint32_t lfa_sts, cfg_idx, tmp_val; + struct bnx2x_softc *sc = params->sc; + + elink_link_reset(params, vars, 1); + + if (!params->lfa_base) + return; + /* Store the new link parameters */ + REG_WR(sc, params->lfa_base + + offsetof(struct shmem_lfa, req_duplex), + params->req_duplex[0] | (params->req_duplex[1] << 16)); + + REG_WR(sc, params->lfa_base + + offsetof(struct shmem_lfa, req_flow_ctrl), + params->req_flow_ctrl[0] | (params->req_flow_ctrl[1] << 16)); + + REG_WR(sc, params->lfa_base + + offsetof(struct shmem_lfa, req_line_speed), + params->req_line_speed[0] | (params->req_line_speed[1] << 16)); + + for (cfg_idx = 0; cfg_idx < SHMEM_LINK_CONFIG_SIZE; cfg_idx++) { + REG_WR(sc, params->lfa_base + + offsetof(struct shmem_lfa, + speed_cap_mask[cfg_idx]), + params->speed_cap_mask[cfg_idx]); + } + + tmp_val = REG_RD(sc, params->lfa_base + + offsetof(struct shmem_lfa, additional_config)); + tmp_val &= ~REQ_FC_AUTO_ADV_MASK; + tmp_val |= params->req_fc_auto_adv; + + REG_WR(sc, params->lfa_base + + offsetof(struct shmem_lfa, additional_config), tmp_val); + + lfa_sts = REG_RD(sc, params->lfa_base + + offsetof(struct shmem_lfa, lfa_sts)); + + /* Clear the "Don't Clear Statistics" bit, and set reason */ + lfa_sts &= ~SHMEM_LFA_DONT_CLEAR_STAT; + + /* Set link flap reason */ + lfa_sts &= ~LFA_LINK_FLAP_REASON_MASK; + lfa_sts |= ((lfa_status & LFA_LINK_FLAP_REASON_MASK) << + LFA_LINK_FLAP_REASON_OFFSET); + + /* Increment link flap counter */ + lfa_sts = ((lfa_sts & ~LINK_FLAP_COUNT_MASK) | + (((((lfa_sts & LINK_FLAP_COUNT_MASK) >> + LINK_FLAP_COUNT_OFFSET) + 1) & 0xff) + << LINK_FLAP_COUNT_OFFSET)); + REG_WR(sc, params->lfa_base + + offsetof(struct shmem_lfa, lfa_sts), lfa_sts); + /* Proceed with regular link initialization */ +} + +elink_status_t elink_phy_init(struct elink_params *params, + struct elink_vars *vars) +{ + int lfa_status; + struct bnx2x_softc *sc = params->sc; + PMD_DRV_LOG(DEBUG, "Phy Initialization started"); + PMD_DRV_LOG(DEBUG, "(1) req_speed %d, req_flowctrl %d", + params->req_line_speed[0], params->req_flow_ctrl[0]); + PMD_DRV_LOG(DEBUG, "(2) req_speed %d, req_flowctrl %d", + params->req_line_speed[1], params->req_flow_ctrl[1]); + PMD_DRV_LOG(DEBUG, "req_adv_flow_ctrl 0x%x", params->req_fc_auto_adv); + vars->link_status = 0; + vars->phy_link_up = 0; + vars->link_up = 0; + vars->line_speed = 0; + vars->duplex = DUPLEX_FULL; + vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; + vars->mac_type = ELINK_MAC_TYPE_NONE; + vars->phy_flags = 0; + vars->check_kr2_recovery_cnt = 0; + params->link_flags = ELINK_PHY_INITIALIZED; + /* Driver opens NIG-BRB filters */ + elink_set_rx_filter(params, 1); + /* Check if link flap can be avoided */ + lfa_status = elink_check_lfa(params); + + if (lfa_status == 0) { + PMD_DRV_LOG(DEBUG, "Link Flap Avoidance in progress"); + return elink_avoid_link_flap(params, vars); + } + + PMD_DRV_LOG(DEBUG, "Cannot avoid link flap lfa_sta=0x%x", lfa_status); + elink_cannot_avoid_link_flap(params, vars, lfa_status); + + /* Disable attentions */ + elink_bits_dis(sc, NIG_REG_MASK_INTERRUPT_PORT0 + params->port * 4, + (ELINK_NIG_MASK_XGXS0_LINK_STATUS | + ELINK_NIG_MASK_XGXS0_LINK10G | + ELINK_NIG_MASK_SERDES0_LINK_STATUS | + ELINK_NIG_MASK_MI_INT)); +#ifdef ELINK_INCLUDE_EMUL + if (!(params->feature_config_flags & + ELINK_FEATURE_CONFIG_EMUL_DISABLE_EMAC)) +#endif + + elink_emac_init(params); + + if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) + vars->link_status |= LINK_STATUS_PFC_ENABLED; + + if ((params->num_phys == 0) && !CHIP_REV_IS_SLOW(sc)) { + PMD_DRV_LOG(DEBUG, "No phy found for initialization !!"); + return ELINK_STATUS_ERROR; + } + set_phy_vars(params, vars); + + PMD_DRV_LOG(DEBUG, "Num of phys on board: %d", params->num_phys); +#ifdef ELINK_INCLUDE_FPGA + if (CHIP_REV_IS_FPGA(sc)) { + return elink_init_fpga(params, vars); + } else +#endif +#ifdef ELINK_INCLUDE_EMUL + if (CHIP_REV_IS_EMUL(sc)) { + return elink_init_emul(params, vars); + } else +#endif + switch (params->loopback_mode) { + case ELINK_LOOPBACK_BMAC: + elink_init_bmac_loopback(params, vars); + break; + case ELINK_LOOPBACK_EMAC: + elink_init_emac_loopback(params, vars); + break; + case ELINK_LOOPBACK_XMAC: + elink_init_xmac_loopback(params, vars); + break; + case ELINK_LOOPBACK_UMAC: + elink_init_umac_loopback(params, vars); + break; + case ELINK_LOOPBACK_XGXS: + case ELINK_LOOPBACK_EXT_PHY: + elink_init_xgxs_loopback(params, vars); + break; + default: + if (!CHIP_IS_E3(sc)) { + if (params->switch_cfg == ELINK_SWITCH_CFG_10G) + elink_xgxs_deassert(params); + else + elink_serdes_deassert(sc, params->port); + } + elink_link_initialize(params, vars); + DELAY(1000 * 30); + elink_link_int_enable(params); + break; + } + elink_update_mng(params, vars->link_status); + + elink_update_mng_eee(params, vars->eee_status); + return ELINK_STATUS_OK; +} + +static elink_status_t elink_link_reset(struct elink_params *params, + struct elink_vars *vars, + uint8_t reset_ext_phy) +{ + struct bnx2x_softc *sc = params->sc; + uint8_t phy_index, port = params->port, clear_latch_ind = 0; + PMD_DRV_LOG(DEBUG, "Resetting the link of port %d", port); + /* Disable attentions */ + vars->link_status = 0; + elink_update_mng(params, vars->link_status); + vars->eee_status &= ~(SHMEM_EEE_LP_ADV_STATUS_MASK | + SHMEM_EEE_ACTIVE_BIT); + elink_update_mng_eee(params, vars->eee_status); + elink_bits_dis(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, + (ELINK_NIG_MASK_XGXS0_LINK_STATUS | + ELINK_NIG_MASK_XGXS0_LINK10G | + ELINK_NIG_MASK_SERDES0_LINK_STATUS | + ELINK_NIG_MASK_MI_INT)); + + /* Activate nig drain */ + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + port * 4, 1); + + /* Disable nig egress interface */ + if (!CHIP_IS_E3(sc)) { + REG_WR(sc, NIG_REG_BMAC0_OUT_EN + port * 4, 0); + REG_WR(sc, NIG_REG_EGRESS_EMAC0_OUT_EN + port * 4, 0); + } +#ifdef ELINK_INCLUDE_EMUL + /* Stop BigMac rx */ + if (!(params->feature_config_flags & + ELINK_FEATURE_CONFIG_EMUL_DISABLE_BMAC)) +#endif + if (!CHIP_IS_E3(sc)) + elink_set_bmac_rx(sc, port, 0); +#ifdef ELINK_INCLUDE_EMUL + /* Stop XMAC/UMAC rx */ + if (!(params->feature_config_flags & + ELINK_FEATURE_CONFIG_EMUL_DISABLE_XMAC)) +#endif + if (CHIP_IS_E3(sc) && !CHIP_REV_IS_FPGA(sc)) { + elink_set_xmac_rxtx(params, 0); + elink_set_umac_rxtx(params, 0); + } + /* Disable emac */ + if (!CHIP_IS_E3(sc)) + REG_WR(sc, NIG_REG_NIG_EMAC0_EN + port * 4, 0); + + DELAY(1000 * 10); + /* The PHY reset is controlled by GPIO 1 + * Hold it as vars low + */ + /* Clear link led */ + elink_set_mdio_emac_per_phy(sc, params); + elink_set_led(params, vars, ELINK_LED_MODE_OFF, 0); + + if (reset_ext_phy && (!CHIP_REV_IS_SLOW(sc))) { + for (phy_index = ELINK_EXT_PHY1; phy_index < params->num_phys; + phy_index++) { + if (params->phy[phy_index].link_reset) { + elink_set_aer_mmd(params, + ¶ms->phy[phy_index]); + params->phy[phy_index].link_reset(¶ms-> + phy + [phy_index], + params); + } + if (params->phy[phy_index].flags & + ELINK_FLAGS_REARM_LATCH_SIGNAL) + clear_latch_ind = 1; + } + } + + if (clear_latch_ind) { + /* Clear latching indication */ + elink_rearm_latch_signal(sc, port, 0); + elink_bits_dis(sc, NIG_REG_LATCH_BC_0 + port * 4, + 1 << ELINK_NIG_LATCH_BC_ENABLE_MI_INT); + } +#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA) + if (!CHIP_REV_IS_SLOW(sc)) +#endif + if (params->phy[ELINK_INT_PHY].link_reset) + params->phy[ELINK_INT_PHY].link_reset(¶ms-> + phy + [ELINK_INT_PHY], + params); + + /* Disable nig ingress interface */ + if (!CHIP_IS_E3(sc)) { + /* Reset BigMac */ + REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + REG_WR(sc, NIG_REG_BMAC0_IN_EN + port * 4, 0); + REG_WR(sc, NIG_REG_EMAC0_IN_EN + port * 4, 0); + } else { + uint32_t xmac_base = + (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + elink_set_xumac_nig(params, 0, 0); + if (REG_RD(sc, MISC_REG_RESET_REG_2) & + MISC_REGISTERS_RESET_REG_2_XMAC) + REG_WR(sc, xmac_base + XMAC_REG_CTRL, + XMAC_CTRL_REG_SOFT_RESET); + } + vars->link_up = 0; + vars->phy_flags = 0; + return ELINK_STATUS_OK; +} + +elink_status_t elink_lfa_reset(struct elink_params * params, + struct elink_vars * vars) +{ + struct bnx2x_softc *sc = params->sc; + vars->link_up = 0; + vars->phy_flags = 0; + params->link_flags &= ~ELINK_PHY_INITIALIZED; + if (!params->lfa_base) + return elink_link_reset(params, vars, 1); + /* + * Activate NIG drain so that during this time the device won't send + * anything while it is unable to response. + */ + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 1); + + /* + * Close gracefully the gate from BMAC to NIG such that no half packets + * are passed. + */ + if (!CHIP_IS_E3(sc)) + elink_set_bmac_rx(sc, params->port, 0); + + if (CHIP_IS_E3(sc)) { + elink_set_xmac_rxtx(params, 0); + elink_set_umac_rxtx(params, 0); + } + /* Wait 10ms for the pipe to clean up */ + DELAY(1000 * 10); + + /* Clean the NIG-BRB using the network filters in a way that will + * not cut a packet in the middle. + */ + elink_set_rx_filter(params, 0); + + /* + * Re-open the gate between the BMAC and the NIG, after verifying the + * gate to the BRB is closed, otherwise packets may arrive to the + * firmware before driver had initialized it. The target is to achieve + * minimum management protocol down time. + */ + if (!CHIP_IS_E3(sc)) + elink_set_bmac_rx(sc, params->port, 1); + + if (CHIP_IS_E3(sc)) { + elink_set_xmac_rxtx(params, 1); + elink_set_umac_rxtx(params, 1); + } + /* Disable NIG drain */ + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0); + return ELINK_STATUS_OK; +} + +/****************************************************************************/ +/* Common function */ +/****************************************************************************/ +static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc, + uint32_t shmem_base_path[], + uint32_t shmem2_base_path[], + uint8_t phy_index, + __rte_unused uint32_t chip_id) +{ + struct elink_phy phy[PORT_MAX]; + struct elink_phy *phy_blk[PORT_MAX]; + uint16_t val; + int8_t port = 0; + int8_t port_of_path = 0; + uint32_t swap_val, swap_override; + swap_val = REG_RD(sc, NIG_REG_PORT_SWAP); + swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE); + port ^= (swap_val && swap_override); + elink_ext_phy_hw_reset(sc, port); + /* PART1 - Reset both phys */ + for (port = PORT_MAX - 1; port >= PORT_0; port--) { + uint32_t shmem_base, shmem2_base; + /* In E2, same phy is using for port0 of the two paths */ + if (CHIP_IS_E1x(sc)) { + shmem_base = shmem_base_path[0]; + shmem2_base = shmem2_base_path[0]; + port_of_path = port; + } else { + shmem_base = shmem_base_path[port]; + shmem2_base = shmem2_base_path[port]; + port_of_path = 0; + } + + /* Extract the ext phy address for the port */ + if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base, + port_of_path, &phy[port]) != + ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "populate_phy failed"); + return ELINK_STATUS_ERROR; + } + /* Disable attentions */ + elink_bits_dis(sc, NIG_REG_MASK_INTERRUPT_PORT0 + + port_of_path * 4, + (ELINK_NIG_MASK_XGXS0_LINK_STATUS | + ELINK_NIG_MASK_XGXS0_LINK10G | + ELINK_NIG_MASK_SERDES0_LINK_STATUS | + ELINK_NIG_MASK_MI_INT)); + + /* Need to take the phy out of low power mode in order + * to write to access its registers + */ + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); + + /* Reset the phy */ + elink_cl45_write(sc, &phy[port], + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15); + } + + /* Add delay of 150ms after reset */ + DELAY(1000 * 150); + + if (phy[PORT_0].addr & 0x1) { + phy_blk[PORT_0] = &(phy[PORT_1]); + phy_blk[PORT_1] = &(phy[PORT_0]); + } else { + phy_blk[PORT_0] = &(phy[PORT_0]); + phy_blk[PORT_1] = &(phy[PORT_1]); + } + + /* PART2 - Download firmware to both phys */ + for (port = PORT_MAX - 1; port >= PORT_0; port--) { + if (CHIP_IS_E1x(sc)) + port_of_path = port; + else + port_of_path = 0; + + PMD_DRV_LOG(DEBUG, "Loading spirom for phy address 0x%x", + phy_blk[port]->addr); + if (elink_8073_8727_external_rom_boot(sc, phy_blk[port], + port_of_path)) + return ELINK_STATUS_ERROR; + + /* Only set bit 10 = 1 (Tx power down) */ + elink_cl45_read(sc, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_TX_POWER_DOWN, &val); + + /* Phase1 of TX_POWER_DOWN reset */ + elink_cl45_write(sc, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_TX_POWER_DOWN, (val | 1 << 10)); + } + + /* Toggle Transmitter: Power down and then up with 600ms delay + * between + */ + DELAY(1000 * 600); + + /* PART3 - complete TX_POWER_DOWN process, and set GPIO2 back to low */ + for (port = PORT_MAX - 1; port >= PORT_0; port--) { + /* Phase2 of POWER_DOWN_RESET */ + /* Release bit 10 (Release Tx power down) */ + elink_cl45_read(sc, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_TX_POWER_DOWN, &val); + + elink_cl45_write(sc, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_TX_POWER_DOWN, + (val & (~(1 << 10)))); + DELAY(1000 * 15); + + /* Read modify write the SPI-ROM version select register */ + elink_cl45_read(sc, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_EDC_FFE_MAIN, &val); + elink_cl45_write(sc, phy_blk[port], + MDIO_PMA_DEVAD, + MDIO_PMA_REG_EDC_FFE_MAIN, (val | (1 << 12))); + + /* set GPIO2 back to LOW */ + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, + MISC_REGISTERS_GPIO_OUTPUT_LOW, port); + } + return ELINK_STATUS_OK; +} + +static elink_status_t elink_8726_common_init_phy(struct bnx2x_softc *sc, + uint32_t shmem_base_path[], + uint32_t shmem2_base_path[], + uint8_t phy_index, + __rte_unused uint32_t chip_id) +{ + uint32_t val; + int8_t port; + struct elink_phy phy; + /* Use port1 because of the static port-swap */ + /* Enable the module detection interrupt */ + val = REG_RD(sc, MISC_REG_GPIO_EVENT_EN); + val |= ((1 << MISC_REGISTERS_GPIO_3) | + (1 << + (MISC_REGISTERS_GPIO_3 + MISC_REGISTERS_GPIO_PORT_SHIFT))); + REG_WR(sc, MISC_REG_GPIO_EVENT_EN, val); + + elink_ext_phy_hw_reset(sc, 0); + DELAY(1000 * 5); + for (port = 0; port < PORT_MAX; port++) { + uint32_t shmem_base, shmem2_base; + + /* In E2, same phy is using for port0 of the two paths */ + if (CHIP_IS_E1x(sc)) { + shmem_base = shmem_base_path[0]; + shmem2_base = shmem2_base_path[0]; + } else { + shmem_base = shmem_base_path[port]; + shmem2_base = shmem2_base_path[port]; + } + /* Extract the ext phy address for the port */ + if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base, + port, &phy) != ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "populate phy failed"); + return ELINK_STATUS_ERROR; + } + + /* Reset phy */ + elink_cl45_write(sc, &phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001); + + /* Set fault module detected LED on */ + elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_0, + MISC_REGISTERS_GPIO_HIGH, port); + } + + return ELINK_STATUS_OK; +} + +static void elink_get_ext_phy_reset_gpio(struct bnx2x_softc *sc, + uint32_t shmem_base, uint8_t * io_gpio, + uint8_t * io_port) +{ + + uint32_t phy_gpio_reset = REG_RD(sc, shmem_base + + offsetof(struct shmem_region, + dev_info. + port_hw_config[PORT_0]. + default_cfg)); + switch (phy_gpio_reset) { + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0: + *io_gpio = 0; + *io_port = 0; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P0: + *io_gpio = 1; + *io_port = 0; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P0: + *io_gpio = 2; + *io_port = 0; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P0: + *io_gpio = 3; + *io_port = 0; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P1: + *io_gpio = 0; + *io_port = 1; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P1: + *io_gpio = 1; + *io_port = 1; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P1: + *io_gpio = 2; + *io_port = 1; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P1: + *io_gpio = 3; + *io_port = 1; + break; + default: + /* Don't override the io_gpio and io_port */ + break; + } +} + +static elink_status_t elink_8727_common_init_phy(struct bnx2x_softc *sc, + uint32_t shmem_base_path[], + uint32_t shmem2_base_path[], + uint8_t phy_index, + __rte_unused uint32_t chip_id) +{ + int8_t port, reset_gpio; + uint32_t swap_val, swap_override; + struct elink_phy phy[PORT_MAX]; + struct elink_phy *phy_blk[PORT_MAX]; + int8_t port_of_path; + swap_val = REG_RD(sc, NIG_REG_PORT_SWAP); + swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE); + + reset_gpio = MISC_REGISTERS_GPIO_1; + port = 1; + + /* Retrieve the reset gpio/port which control the reset. + * Default is GPIO1, PORT1 + */ + elink_get_ext_phy_reset_gpio(sc, shmem_base_path[0], + (uint8_t *) & reset_gpio, + (uint8_t *) & port); + + /* Calculate the port based on port swap */ + port ^= (swap_val && swap_override); + + /* Initiate PHY reset */ + elink_cb_gpio_write(sc, reset_gpio, MISC_REGISTERS_GPIO_OUTPUT_LOW, + port); + DELAY(1000 * 1); + elink_cb_gpio_write(sc, reset_gpio, MISC_REGISTERS_GPIO_OUTPUT_HIGH, + port); + + DELAY(1000 * 5); + + /* PART1 - Reset both phys */ + for (port = PORT_MAX - 1; port >= PORT_0; port--) { + uint32_t shmem_base, shmem2_base; + + /* In E2, same phy is using for port0 of the two paths */ + if (CHIP_IS_E1x(sc)) { + shmem_base = shmem_base_path[0]; + shmem2_base = shmem2_base_path[0]; + port_of_path = port; + } else { + shmem_base = shmem_base_path[port]; + shmem2_base = shmem2_base_path[port]; + port_of_path = 0; + } + + /* Extract the ext phy address for the port */ + if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base, + port_of_path, &phy[port]) != + ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "populate phy failed"); + return ELINK_STATUS_ERROR; + } + /* disable attentions */ + elink_bits_dis(sc, NIG_REG_MASK_INTERRUPT_PORT0 + + port_of_path * 4, + (ELINK_NIG_MASK_XGXS0_LINK_STATUS | + ELINK_NIG_MASK_XGXS0_LINK10G | + ELINK_NIG_MASK_SERDES0_LINK_STATUS | + ELINK_NIG_MASK_MI_INT)); + + /* Reset the phy */ + elink_cl45_write(sc, &phy[port], + MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15); + } + + /* Add delay of 150ms after reset */ + DELAY(1000 * 150); + if (phy[PORT_0].addr & 0x1) { + phy_blk[PORT_0] = &(phy[PORT_1]); + phy_blk[PORT_1] = &(phy[PORT_0]); + } else { + phy_blk[PORT_0] = &(phy[PORT_0]); + phy_blk[PORT_1] = &(phy[PORT_1]); + } + /* PART2 - Download firmware to both phys */ + for (port = PORT_MAX - 1; port >= PORT_0; port--) { + if (CHIP_IS_E1x(sc)) + port_of_path = port; + else + port_of_path = 0; + PMD_DRV_LOG(DEBUG, "Loading spirom for phy address 0x%x", + phy_blk[port]->addr); + if (elink_8073_8727_external_rom_boot(sc, phy_blk[port], + port_of_path)) + return ELINK_STATUS_ERROR; + /* Disable PHY transmitter output */ + elink_cl45_write(sc, phy_blk[port], + MDIO_PMA_DEVAD, MDIO_PMA_REG_TX_DISABLE, 1); + + } + return ELINK_STATUS_OK; +} + +static elink_status_t elink_84833_common_init_phy(struct bnx2x_softc *sc, + uint32_t shmem_base_path[], + __rte_unused uint32_t + shmem2_base_path[], + __rte_unused uint8_t + phy_index, uint32_t chip_id) +{ + uint8_t reset_gpios; + reset_gpios = elink_84833_get_reset_gpios(sc, shmem_base_path, chip_id); + elink_cb_gpio_mult_write(sc, reset_gpios, + MISC_REGISTERS_GPIO_OUTPUT_LOW); + DELAY(10); + elink_cb_gpio_mult_write(sc, reset_gpios, + MISC_REGISTERS_GPIO_OUTPUT_HIGH); + PMD_DRV_LOG(DEBUG, "84833 reset pulse on pin values 0x%x", reset_gpios); + return ELINK_STATUS_OK; +} + +static elink_status_t elink_ext_phy_common_init(struct bnx2x_softc *sc, + uint32_t shmem_base_path[], + uint32_t shmem2_base_path[], + uint8_t phy_index, + uint32_t ext_phy_type, + uint32_t chip_id) +{ + elink_status_t rc = ELINK_STATUS_OK; + + switch (ext_phy_type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8073: + rc = elink_8073_common_init_phy(sc, shmem_base_path, + shmem2_base_path, + phy_index, chip_id); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8722: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727_NOC: + rc = elink_8727_common_init_phy(sc, shmem_base_path, + shmem2_base_path, + phy_index, chip_id); + break; + + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726: + /* GPIO1 affects both ports, so there's need to pull + * it for single port alone + */ + rc = elink_8726_common_init_phy(sc, shmem_base_path, + shmem2_base_path, + phy_index, chip_id); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833: + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84834: + /* GPIO3's are linked, and so both need to be toggled + * to obtain required 2us pulse. + */ + rc = elink_84833_common_init_phy(sc, shmem_base_path, + shmem2_base_path, + phy_index, chip_id); + break; + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE: + rc = ELINK_STATUS_ERROR; + break; + default: + PMD_DRV_LOG(DEBUG, + "ext_phy 0x%x common init not required", + ext_phy_type); + break; + } + + if (rc != ELINK_STATUS_OK) + elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, 0); // "Warning: PHY was not initialized," + // " Port %d", + + return rc; +} + +elink_status_t elink_common_init_phy(struct bnx2x_softc * sc, + uint32_t shmem_base_path[], + uint32_t shmem2_base_path[], + uint32_t chip_id, + __rte_unused uint8_t one_port_enabled) +{ + elink_status_t rc = ELINK_STATUS_OK; + uint32_t phy_ver, val; + uint8_t phy_index = 0; + uint32_t ext_phy_type, ext_phy_config; +#if defined(ELINK_INCLUDE_EMUL) || defined(ELINK_INCLUDE_FPGA) + if (CHIP_REV_IS_EMUL(sc) || CHIP_REV_IS_FPGA(sc)) + return ELINK_STATUS_OK; +#endif + + elink_set_mdio_clk(sc, GRCBASE_EMAC0); + elink_set_mdio_clk(sc, GRCBASE_EMAC1); + PMD_DRV_LOG(DEBUG, "Begin common phy init"); + if (CHIP_IS_E3(sc)) { + /* Enable EPIO */ + val = REG_RD(sc, MISC_REG_GEN_PURP_HWG); + REG_WR(sc, MISC_REG_GEN_PURP_HWG, val | 1); + } + /* Check if common init was already done */ + phy_ver = REG_RD(sc, shmem_base_path[0] + + offsetof(struct shmem_region, + port_mb[PORT_0].ext_phy_fw_version)); + if (phy_ver) { + PMD_DRV_LOG(DEBUG, "Not doing common init; phy ver is 0x%x", + phy_ver); + return ELINK_STATUS_OK; + } + + /* Read the ext_phy_type for arbitrary port(0) */ + for (phy_index = ELINK_EXT_PHY1; phy_index < ELINK_MAX_PHYS; + phy_index++) { + ext_phy_config = elink_get_ext_phy_config(sc, + shmem_base_path[0], + phy_index, 0); + ext_phy_type = ELINK_XGXS_EXT_PHY_TYPE(ext_phy_config); + rc |= elink_ext_phy_common_init(sc, shmem_base_path, + shmem2_base_path, + phy_index, ext_phy_type, + chip_id); + } + return rc; +} + +static void elink_check_over_curr(struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t cfg_pin; + uint8_t port = params->port; + uint32_t pin_val; + + cfg_pin = (REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port]. + e3_cmn_pin_cfg1)) & + PORT_HW_CFG_E3_OVER_CURRENT_MASK) >> + PORT_HW_CFG_E3_OVER_CURRENT_SHIFT; + + /* Ignore check if no external input PIN available */ + if (elink_get_cfg_pin(sc, cfg_pin, &pin_val) != ELINK_STATUS_OK) + return; + + if (!pin_val) { + if ((vars->phy_flags & PHY_OVER_CURRENT_FLAG) == 0) { + elink_cb_event_log(sc, ELINK_LOG_ID_OVER_CURRENT, params->port); //"Error: Power fault on Port %d has" + // " been detected and the power to " + // "that SFP+ module has been removed" + // " to prevent failure of the card." + // " Please remove the SFP+ module and" + // " restart the system to clear this" + // " error.", + vars->phy_flags |= PHY_OVER_CURRENT_FLAG; + elink_warpcore_power_module(params, 0); + } + } else + vars->phy_flags &= ~PHY_OVER_CURRENT_FLAG; +} + +/* Returns 0 if no change occured since last check; 1 otherwise. */ +static uint8_t elink_analyze_link_error(struct elink_params *params, + struct elink_vars *vars, + uint32_t status, uint32_t phy_flag, + uint32_t link_flag, uint8_t notify) +{ + struct bnx2x_softc *sc = params->sc; + /* Compare new value with previous value */ + uint8_t led_mode; + uint32_t old_status = (vars->phy_flags & phy_flag) ? 1 : 0; + + if ((status ^ old_status) == 0) + return 0; + + /* If values differ */ + switch (phy_flag) { + case PHY_HALF_OPEN_CONN_FLAG: + PMD_DRV_LOG(DEBUG, "Analyze Remote Fault"); + break; + case PHY_SFP_TX_FAULT_FLAG: + PMD_DRV_LOG(DEBUG, "Analyze TX Fault"); + break; + default: + PMD_DRV_LOG(DEBUG, "Analyze UNKNOWN"); + } + PMD_DRV_LOG(DEBUG, "Link changed:[%x %x]->%x", vars->link_up, + old_status, status); + + /* a. Update shmem->link_status accordingly + * b. Update elink_vars->link_up + */ + if (status) { + vars->link_status &= ~LINK_STATUS_LINK_UP; + vars->link_status |= link_flag; + vars->link_up = 0; + vars->phy_flags |= phy_flag; + + /* activate nig drain */ + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 1); + /* Set LED mode to off since the PHY doesn't know about these + * errors + */ + led_mode = ELINK_LED_MODE_OFF; + } else { + vars->link_status |= LINK_STATUS_LINK_UP; + vars->link_status &= ~link_flag; + vars->link_up = 1; + vars->phy_flags &= ~phy_flag; + led_mode = ELINK_LED_MODE_OPER; + + /* Clear nig drain */ + REG_WR(sc, NIG_REG_EGRESS_DRAIN0_MODE + params->port * 4, 0); + } + elink_sync_link(params, vars); + /* Update the LED according to the link state */ + elink_set_led(params, vars, led_mode, ELINK_SPEED_10000); + + /* Update link status in the shared memory */ + elink_update_mng(params, vars->link_status); + + /* C. Trigger General Attention */ + vars->periodic_flags |= ELINK_PERIODIC_FLAGS_LINK_EVENT; + if (notify) + elink_cb_notify_link_changed(sc); + + return 1; +} + +/****************************************************************************** +* Description: +* This function checks for half opened connection change indication. +* When such change occurs, it calls the elink_analyze_link_error +* to check if Remote Fault is set or cleared. Reception of remote fault +* status message in the MAC indicates that the peer's MAC has detected +* a fault, for example, due to break in the TX side of fiber. +* +******************************************************************************/ +static elink_status_t elink_check_half_open_conn(struct elink_params *params, + struct elink_vars *vars, + uint8_t notify) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t lss_status = 0; + uint32_t mac_base; + /* In case link status is physically up @ 10G do */ + if (((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0) || + (REG_RD(sc, NIG_REG_EGRESS_EMAC0_PORT + params->port * 4))) + return ELINK_STATUS_OK; + + if (CHIP_IS_E3(sc) && + (REG_RD(sc, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_XMAC))) { + /* Check E3 XMAC */ + /* Note that link speed cannot be queried here, since it may be + * zero while link is down. In case UMAC is active, LSS will + * simply not be set + */ + mac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + + /* Clear stick bits (Requires rising edge) */ + REG_WR(sc, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0); + REG_WR(sc, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, + XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS | + XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS); + if (REG_RD(sc, mac_base + XMAC_REG_RX_LSS_STATUS)) + lss_status = 1; + + elink_analyze_link_error(params, vars, lss_status, + PHY_HALF_OPEN_CONN_FLAG, + LINK_STATUS_NONE, notify); + } else if (REG_RD(sc, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) { + /* Check E1X / E2 BMAC */ + uint32_t lss_status_reg; + uint32_t wb_data[2]; + mac_base = params->port ? NIG_REG_INGRESS_BMAC1_MEM : + NIG_REG_INGRESS_BMAC0_MEM; + /* Read BIGMAC_REGISTER_RX_LSS_STATUS */ + if (CHIP_IS_E2(sc)) + lss_status_reg = BIGMAC2_REGISTER_RX_LSS_STAT; + else + lss_status_reg = BIGMAC_REGISTER_RX_LSS_STATUS; + + REG_RD_DMAE(sc, mac_base + lss_status_reg, wb_data, 2); + lss_status = (wb_data[0] > 0); + + elink_analyze_link_error(params, vars, lss_status, + PHY_HALF_OPEN_CONN_FLAG, + LINK_STATUS_NONE, notify); + } + return ELINK_STATUS_OK; +} + +static void elink_sfp_tx_fault_detection(struct elink_phy *phy, + struct elink_params *params, + struct elink_vars *vars) +{ + struct bnx2x_softc *sc = params->sc; + uint32_t cfg_pin, value = 0; + uint8_t led_change, port = params->port; + + /* Get The SFP+ TX_Fault controlling pin ([eg]pio) */ + cfg_pin = (REG_RD(sc, params->shmem_base + offsetof(struct shmem_region, + dev_info. + port_hw_config + [port]. + e3_cmn_pin_cfg)) & + PORT_HW_CFG_E3_TX_FAULT_MASK) >> + PORT_HW_CFG_E3_TX_FAULT_SHIFT; + + if (elink_get_cfg_pin(sc, cfg_pin, &value)) { + PMD_DRV_LOG(DEBUG, "Failed to read pin 0x%02x", cfg_pin); + return; + } + + led_change = elink_analyze_link_error(params, vars, value, + PHY_SFP_TX_FAULT_FLAG, + LINK_STATUS_SFP_TX_FAULT, 1); + + if (led_change) { + /* Change TX_Fault led, set link status for further syncs */ + uint8_t led_mode; + + if (vars->phy_flags & PHY_SFP_TX_FAULT_FLAG) { + led_mode = MISC_REGISTERS_GPIO_HIGH; + vars->link_status |= LINK_STATUS_SFP_TX_FAULT; + } else { + led_mode = MISC_REGISTERS_GPIO_LOW; + vars->link_status &= ~LINK_STATUS_SFP_TX_FAULT; + } + + /* If module is unapproved, led should be on regardless */ + if (!(phy->flags & ELINK_FLAGS_SFP_NOT_APPROVED)) { + PMD_DRV_LOG(DEBUG, "Change TX_Fault LED: ->%x", + led_mode); + elink_set_e3_module_fault_led(params, led_mode); + } + } +} + +static void elink_kr2_recovery(struct elink_params *params, + struct elink_vars *vars, struct elink_phy *phy) +{ + PMD_DRV_LOG(DEBUG, "KR2 recovery"); + + elink_warpcore_enable_AN_KR2(phy, params, vars); + elink_warpcore_restart_AN_KR(phy, params); +} + +static void elink_check_kr2_wa(struct elink_params *params, + struct elink_vars *vars, struct elink_phy *phy) +{ + struct bnx2x_softc *sc = params->sc; + uint16_t base_page, next_page, not_kr2_device, lane; + int sigdet; + + /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery + * Since some switches tend to reinit the AN process and clear the + * the advertised BP/NP after ~2 seconds causing the KR2 to be disabled + * and recovered many times + */ + if (vars->check_kr2_recovery_cnt > 0) { + vars->check_kr2_recovery_cnt--; + return; + } + + sigdet = elink_warpcore_get_sigdet(phy, params); + if (!sigdet) { + if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { + elink_kr2_recovery(params, vars, phy); + PMD_DRV_LOG(DEBUG, "No sigdet"); + } + return; + } + + lane = elink_get_warpcore_lane(params); + CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, lane); + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG, &base_page); + elink_cl45_read(sc, phy, MDIO_AN_DEVAD, + MDIO_AN_REG_LP_AUTO_NEG2, &next_page); + elink_set_aer_mmd(params, phy); + + /* CL73 has not begun yet */ + if (base_page == 0) { + if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { + elink_kr2_recovery(params, vars, phy); + PMD_DRV_LOG(DEBUG, "No BP"); + } + return; + } + + /* In case NP bit is not set in the BasePage, or it is set, + * but only KX is advertised, declare this link partner as non-KR2 + * device. + */ + not_kr2_device = (((base_page & 0x8000) == 0) || + (((base_page & 0x8000) && + ((next_page & 0xe0) == 0x2)))); + + /* In case KR2 is already disabled, check if we need to re-enable it */ + if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { + if (!not_kr2_device) { + PMD_DRV_LOG(DEBUG, "BP=0x%x, NP=0x%x", base_page, + next_page); + elink_kr2_recovery(params, vars, phy); + } + return; + } + /* KR2 is enabled, but not KR2 device */ + if (not_kr2_device) { + /* Disable KR2 on both lanes */ + PMD_DRV_LOG(DEBUG, "BP=0x%x, NP=0x%x", base_page, next_page); + elink_disable_kr2(params, vars, phy); + /* Restart AN on leading lane */ + elink_warpcore_restart_AN_KR(phy, params); + return; + } +} + +void elink_period_func(struct elink_params *params, struct elink_vars *vars) +{ + uint16_t phy_idx; + struct bnx2x_softc *sc = params->sc; + for (phy_idx = ELINK_INT_PHY; phy_idx < ELINK_MAX_PHYS; phy_idx++) { + if (params->phy[phy_idx].flags & ELINK_FLAGS_TX_ERROR_CHECK) { + elink_set_aer_mmd(params, ¶ms->phy[phy_idx]); + if (elink_check_half_open_conn(params, vars, 1) != + ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "Fault detection failed"); + } + break; + } + } + + if (CHIP_IS_E3(sc)) { + struct elink_phy *phy = ¶ms->phy[ELINK_INT_PHY]; + elink_set_aer_mmd(params, phy); + if ((phy->supported & ELINK_SUPPORTED_20000baseKR2_Full) && + (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_20G)) + elink_check_kr2_wa(params, vars, phy); + elink_check_over_curr(params, vars); + if (vars->rx_tx_asic_rst) + elink_warpcore_config_runtime(phy, params, vars); + + if ((REG_RD(sc, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port]. + default_cfg)) + & PORT_HW_CFG_NET_SERDES_IF_MASK) == + PORT_HW_CFG_NET_SERDES_IF_SFI) { + if (elink_is_sfp_module_plugged(params)) { + elink_sfp_tx_fault_detection(phy, params, vars); + } else if (vars->link_status & LINK_STATUS_SFP_TX_FAULT) { + /* Clean trail, interrupt corrects the leds */ + vars->link_status &= ~LINK_STATUS_SFP_TX_FAULT; + vars->phy_flags &= ~PHY_SFP_TX_FAULT_FLAG; + /* Update link status in the shared memory */ + elink_update_mng(params, vars->link_status); + } + } + } +} + +uint8_t elink_fan_failure_det_req(struct bnx2x_softc *sc, + uint32_t shmem_base, + uint32_t shmem2_base, uint8_t port) +{ + uint8_t phy_index, fan_failure_det_req = 0; + struct elink_phy phy; + for (phy_index = ELINK_EXT_PHY1; phy_index < ELINK_MAX_PHYS; + phy_index++) { + if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base, + port, &phy) + != ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "populate phy failed"); + return 0; + } + fan_failure_det_req |= (phy.flags & + ELINK_FLAGS_FAN_FAILURE_DET_REQ); + } + return fan_failure_det_req; +} + +void elink_hw_reset_phy(struct elink_params *params) +{ + uint8_t phy_index; + struct bnx2x_softc *sc = params->sc; + elink_update_mng(params, 0); + elink_bits_dis(sc, NIG_REG_MASK_INTERRUPT_PORT0 + params->port * 4, + (ELINK_NIG_MASK_XGXS0_LINK_STATUS | + ELINK_NIG_MASK_XGXS0_LINK10G | + ELINK_NIG_MASK_SERDES0_LINK_STATUS | + ELINK_NIG_MASK_MI_INT)); + + for (phy_index = ELINK_INT_PHY; phy_index < ELINK_MAX_PHYS; phy_index++) { + if (params->phy[phy_index].hw_reset) { + params->phy[phy_index].hw_reset(¶ms->phy[phy_index], + params); + params->phy[phy_index] = phy_null; + } + } +} + +void elink_init_mod_abs_int(struct bnx2x_softc *sc, struct elink_vars *vars, + __rte_unused uint32_t chip_id, uint32_t shmem_base, + uint32_t shmem2_base, uint8_t port) +{ + uint8_t gpio_num = 0xff, gpio_port = 0xff, phy_index; + uint32_t val; + uint32_t offset, aeu_mask, swap_val, swap_override, sync_offset; + if (CHIP_IS_E3(sc)) { + if (elink_get_mod_abs_int_cfg(sc, + shmem_base, + port, + &gpio_num, + &gpio_port) != ELINK_STATUS_OK) + return; + } else { + struct elink_phy phy; + for (phy_index = ELINK_EXT_PHY1; phy_index < ELINK_MAX_PHYS; + phy_index++) { + if (elink_populate_phy(sc, phy_index, shmem_base, + shmem2_base, port, &phy) + != ELINK_STATUS_OK) { + PMD_DRV_LOG(DEBUG, "populate phy failed"); + return; + } + if (phy.type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726) { + gpio_num = MISC_REGISTERS_GPIO_3; + gpio_port = port; + break; + } + } + } + + if (gpio_num == 0xff) + return; + + /* Set GPIO3 to trigger SFP+ module insertion/removal */ + elink_cb_gpio_write(sc, gpio_num, MISC_REGISTERS_GPIO_INPUT_HI_Z, + gpio_port); + + swap_val = REG_RD(sc, NIG_REG_PORT_SWAP); + swap_override = REG_RD(sc, NIG_REG_STRAP_OVERRIDE); + gpio_port ^= (swap_val && swap_override); + + vars->aeu_int_mask = AEU_INPUTS_ATTN_BITS_GPIO0_FUNCTION_0 << + (gpio_num + (gpio_port << 2)); + + sync_offset = shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].aeu_int_mask); + REG_WR(sc, sync_offset, vars->aeu_int_mask); + + PMD_DRV_LOG(DEBUG, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x", + gpio_num, gpio_port, vars->aeu_int_mask); + + if (port == 0) + offset = MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0; + else + offset = MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0; + + /* Open appropriate AEU for interrupts */ + aeu_mask = REG_RD(sc, offset); + aeu_mask |= vars->aeu_int_mask; + REG_WR(sc, offset, aeu_mask); + + /* Enable the GPIO to trigger interrupt */ + val = REG_RD(sc, MISC_REG_GPIO_EVENT_EN); + val |= 1 << (gpio_num + (gpio_port << 2)); + REG_WR(sc, MISC_REG_GPIO_EVENT_EN, val); +} |