summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x/elink.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x/elink.c')
-rw-r--r--drivers/net/bnx2x/elink.c761
1 files changed, 390 insertions, 371 deletions
diff --git a/drivers/net/bnx2x/elink.c b/drivers/net/bnx2x/elink.c
index 89747104..95b4e759 100644
--- a/drivers/net/bnx2x/elink.c
+++ b/drivers/net/bnx2x/elink.c
@@ -944,7 +944,7 @@ static int elink_check_lfa(struct elink_params *params)
* to verify DCC bit is cleared in any case!
*/
if (additional_config & NO_LFA_DUE_TO_DCC_MASK) {
- PMD_DRV_LOG(DEBUG, "No LFA due to DCC flap after clp exit");
+ PMD_DRV_LOG(DEBUG, sc, "No LFA due to DCC flap after clp exit");
REG_WR(sc, params->lfa_base +
offsetof(struct shmem_lfa, additional_config),
additional_config & ~NO_LFA_DUE_TO_DCC_MASK);
@@ -985,7 +985,7 @@ static int elink_check_lfa(struct elink_params *params)
offsetof(struct shmem_lfa, req_duplex));
req_val = params->req_duplex[0] | (params->req_duplex[1] << 16);
if ((saved_val & lfa_mask) != (req_val & lfa_mask)) {
- PMD_DRV_LOG(INFO, "Duplex mismatch %x vs. %x",
+ PMD_DRV_LOG(INFO, sc, "Duplex mismatch %x vs. %x",
(saved_val & lfa_mask), (req_val & lfa_mask));
return LFA_DUPLEX_MISMATCH;
}
@@ -994,7 +994,7 @@ static int elink_check_lfa(struct elink_params *params)
offsetof(struct shmem_lfa, req_flow_ctrl));
req_val = params->req_flow_ctrl[0] | (params->req_flow_ctrl[1] << 16);
if ((saved_val & lfa_mask) != (req_val & lfa_mask)) {
- PMD_DRV_LOG(DEBUG, "Flow control mismatch %x vs. %x",
+ PMD_DRV_LOG(DEBUG, sc, "Flow control mismatch %x vs. %x",
(saved_val & lfa_mask), (req_val & lfa_mask));
return LFA_FLOW_CTRL_MISMATCH;
}
@@ -1003,7 +1003,7 @@ static int elink_check_lfa(struct elink_params *params)
offsetof(struct shmem_lfa, req_line_speed));
req_val = params->req_line_speed[0] | (params->req_line_speed[1] << 16);
if ((saved_val & lfa_mask) != (req_val & lfa_mask)) {
- PMD_DRV_LOG(DEBUG, "Link speed mismatch %x vs. %x",
+ PMD_DRV_LOG(DEBUG, sc, "Link speed mismatch %x vs. %x",
(saved_val & lfa_mask), (req_val & lfa_mask));
return LFA_LINK_SPEED_MISMATCH;
}
@@ -1014,7 +1014,7 @@ static int elink_check_lfa(struct elink_params *params)
speed_cap_mask[cfg_idx]));
if (cur_speed_cap_mask != params->speed_cap_mask[cfg_idx]) {
- PMD_DRV_LOG(DEBUG, "Speed Cap mismatch %x vs. %x",
+ PMD_DRV_LOG(DEBUG, sc, "Speed Cap mismatch %x vs. %x",
cur_speed_cap_mask,
params->speed_cap_mask[cfg_idx]);
return LFA_SPEED_CAP_MISMATCH;
@@ -1027,7 +1027,7 @@ static int elink_check_lfa(struct elink_params *params)
REQ_FC_AUTO_ADV_MASK;
if ((uint16_t) cur_req_fc_auto_adv != params->req_fc_auto_adv) {
- PMD_DRV_LOG(DEBUG, "Flow Ctrl AN mismatch %x vs. %x",
+ PMD_DRV_LOG(DEBUG, sc, "Flow Ctrl AN mismatch %x vs. %x",
cur_req_fc_auto_adv, params->req_fc_auto_adv);
return LFA_FLOW_CTRL_MISMATCH;
}
@@ -1040,7 +1040,8 @@ static int elink_check_lfa(struct elink_params *params)
(params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI)) ||
((eee_status & SHMEM_EEE_REQUESTED_BIT) ^
(params->eee_mode & ELINK_EEE_MODE_ADV_LPI))) {
- PMD_DRV_LOG(DEBUG, "EEE mismatch %x vs. %x", params->eee_mode,
+ PMD_DRV_LOG(DEBUG, sc,
+ "EEE mismatch %x vs. %x", params->eee_mode,
eee_status);
return LFA_EEE_MISMATCH;
}
@@ -1059,7 +1060,7 @@ static void elink_get_epio(struct bnx2x_softc *sc, uint32_t epio_pin,
*en = 0;
/* Sanity check */
if (epio_pin > 31) {
- PMD_DRV_LOG(DEBUG, "Invalid EPIO pin %d to get", epio_pin);
+ PMD_DRV_LOG(DEBUG, sc, "Invalid EPIO pin %d to get", epio_pin);
return;
}
@@ -1077,10 +1078,10 @@ static void elink_set_epio(struct bnx2x_softc *sc, uint32_t epio_pin, uint32_t e
/* Sanity check */
if (epio_pin > 31) {
- PMD_DRV_LOG(DEBUG, "Invalid EPIO pin %d to set", epio_pin);
+ PMD_DRV_LOG(DEBUG, sc, "Invalid EPIO pin %d to set", epio_pin);
return;
}
- PMD_DRV_LOG(DEBUG, "Setting EPIO pin %d to %d", epio_pin, en);
+ PMD_DRV_LOG(DEBUG, sc, "Setting EPIO pin %d to %d", epio_pin, en);
epio_mask = 1 << epio_pin;
/* Set this EPIO to output */
gp_output = REG_RD(sc, MCP_REG_MCPR_GP_OUTPUTS);
@@ -1211,7 +1212,7 @@ static void elink_set_mdio_clk(struct bnx2x_softc *sc, uint32_t emac_base)
new_mode |= clc_cnt;
new_mode |= (EMAC_MDIO_MODE_CLAUSE_45);
- PMD_DRV_LOG(DEBUG, "Changing emac_mode from 0x%x to 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Changing emac_mode from 0x%x to 0x%x",
cur_mode, new_mode);
REG_WR(sc, emac_base + EMAC_REG_EMAC_MDIO_MODE, new_mode);
DELAY(40);
@@ -1264,9 +1265,9 @@ static void elink_emac_init(struct elink_params *params)
timeout = 200;
do {
val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE);
- PMD_DRV_LOG(DEBUG, "EMAC reset reg is %u", val);
+ PMD_DRV_LOG(DEBUG, sc, "EMAC reset reg is %u", val);
if (!timeout) {
- PMD_DRV_LOG(DEBUG, "EMAC timeout!");
+ PMD_DRV_LOG(DEBUG, sc, "EMAC timeout!");
return;
}
timeout--;
@@ -1329,7 +1330,7 @@ static void elink_umac_enable(struct elink_params *params,
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
(MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port));
- PMD_DRV_LOG(DEBUG, "enabling UMAC");
+ PMD_DRV_LOG(DEBUG, sc, "enabling UMAC");
/* This register opens the gate for the UMAC despite its name */
REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + params->port * 4, 1);
@@ -1352,7 +1353,7 @@ static void elink_umac_enable(struct elink_params *params,
val |= (3 << 2);
break;
default:
- PMD_DRV_LOG(DEBUG, "Invalid speed for UMAC %d",
+ PMD_DRV_LOG(DEBUG, sc, "Invalid speed for UMAC %d",
vars->line_speed);
break;
}
@@ -1370,7 +1371,7 @@ static void elink_umac_enable(struct elink_params *params,
/* Configure UMAC for EEE */
if (vars->eee_status & SHMEM_EEE_ADV_STATUS_MASK) {
- PMD_DRV_LOG(DEBUG, "configured UMAC for EEE");
+ PMD_DRV_LOG(DEBUG, sc, "configured UMAC for EEE");
REG_WR(sc, umac_base + UMAC_REG_UMAC_EEE_CTRL,
UMAC_UMAC_EEE_CTRL_REG_EEE_EN);
REG_WR(sc, umac_base + UMAC_REG_EEE_WAKE_TIMER, 0x11);
@@ -1428,7 +1429,7 @@ static void elink_xmac_init(struct elink_params *params, uint32_t max_speed)
is_port4mode &&
(REG_RD(sc, MISC_REG_RESET_REG_2) &
MISC_REGISTERS_RESET_REG_2_XMAC)) {
- PMD_DRV_LOG(DEBUG, "XMAC already out of reset in 4-port mode");
+ PMD_DRV_LOG(DEBUG, sc, "XMAC already out of reset in 4-port mode");
return;
}
@@ -1440,7 +1441,7 @@ static void elink_xmac_init(struct elink_params *params, uint32_t max_speed)
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
MISC_REGISTERS_RESET_REG_2_XMAC);
if (is_port4mode) {
- PMD_DRV_LOG(DEBUG, "Init XMAC to 2 ports x 10G per path");
+ PMD_DRV_LOG(DEBUG, sc, "Init XMAC to 2 ports x 10G per path");
/* Set the number of ports on the system side to up to 2 */
REG_WR(sc, MISC_REG_XMAC_CORE_PORT_MODE, 1);
@@ -1451,12 +1452,12 @@ static void elink_xmac_init(struct elink_params *params, uint32_t max_speed)
/* Set the number of ports on the system side to 1 */
REG_WR(sc, MISC_REG_XMAC_CORE_PORT_MODE, 0);
if (max_speed == ELINK_SPEED_10000) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Init XMAC to 10G x 1 port per path");
/* Set the number of ports on the Warp Core to 10G */
REG_WR(sc, MISC_REG_XMAC_PHY_PORT_MODE, 3);
} else {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Init XMAC to 20G x 2 ports per path");
/* Set the number of ports on the Warp Core to 20G */
REG_WR(sc, MISC_REG_XMAC_PHY_PORT_MODE, 1);
@@ -1489,7 +1490,7 @@ static void elink_set_xmac_rxtx(struct elink_params *params, uint8_t en)
(pfc_ctrl & ~(1 << 1)));
REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL_HI,
(pfc_ctrl | (1 << 1)));
- PMD_DRV_LOG(DEBUG, "Disable XMAC on port %x", port);
+ PMD_DRV_LOG(DEBUG, sc, "Disable XMAC on port %x", port);
val = REG_RD(sc, xmac_base + XMAC_REG_CTRL);
if (en)
val |= (XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN);
@@ -1504,7 +1505,7 @@ static elink_status_t elink_xmac_enable(struct elink_params *params,
{
uint32_t val, xmac_base;
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "enabling XMAC");
+ PMD_DRV_LOG(DEBUG, sc, "enabling XMAC");
xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
@@ -1541,7 +1542,7 @@ static elink_status_t elink_xmac_enable(struct elink_params *params,
elink_update_pfc_xmac(params, vars);
if (vars->eee_status & SHMEM_EEE_ADV_STATUS_MASK) {
- PMD_DRV_LOG(DEBUG, "Setting XMAC for EEE");
+ PMD_DRV_LOG(DEBUG, sc, "Setting XMAC for EEE");
REG_WR(sc, xmac_base + XMAC_REG_EEE_TIMERS_HI, 0x1380008);
REG_WR(sc, xmac_base + XMAC_REG_EEE_CTRL, 0x1);
} else {
@@ -1577,7 +1578,7 @@ static elink_status_t elink_emac_enable(struct elink_params *params,
uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
uint32_t val;
- PMD_DRV_LOG(DEBUG, "enabling EMAC");
+ PMD_DRV_LOG(DEBUG, sc, "enabling EMAC");
/* Disable BMAC */
REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
@@ -1591,14 +1592,14 @@ static elink_status_t elink_emac_enable(struct elink_params *params,
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >>
PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT);
- PMD_DRV_LOG(DEBUG, "XGXS");
+ PMD_DRV_LOG(DEBUG, sc, "XGXS");
/* select the master lanes (out of 0-3) */
REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, ser_lane);
/* select XGXS */
REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1);
} else { /* SerDes */
- PMD_DRV_LOG(DEBUG, "SerDes");
+ PMD_DRV_LOG(DEBUG, sc, "SerDes");
/* select SerDes */
REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 0);
}
@@ -1644,7 +1645,7 @@ static elink_status_t elink_emac_enable(struct elink_params *params,
*/
elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_MODE, 0);
if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) {
- PMD_DRV_LOG(DEBUG, "PFC is enabled");
+ PMD_DRV_LOG(DEBUG, sc, "PFC is enabled");
/* Enable PFC again */
elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_MODE,
EMAC_REG_RX_PFC_MODE_RX_EN |
@@ -1764,7 +1765,7 @@ static void elink_update_pfc_bmac2(struct elink_params *params,
REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_TX_CONTROL, wb_data, 2);
if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) {
- PMD_DRV_LOG(DEBUG, "PFC is enabled");
+ PMD_DRV_LOG(DEBUG, sc, "PFC is enabled");
/* Enable PFC RX & TX & STATS and set 8 COS */
wb_data[0] = 0x0;
wb_data[0] |= (1 << 0); /* RX */
@@ -1778,7 +1779,7 @@ static void elink_update_pfc_bmac2(struct elink_params *params,
/* Clear the force Xon */
wb_data[0] &= ~(1 << 2);
} else {
- PMD_DRV_LOG(DEBUG, "PFC is disabled");
+ PMD_DRV_LOG(DEBUG, sc, "PFC is disabled");
/* Disable PFC RX & TX & STATS and set 8 COS */
wb_data[0] = 0x8;
wb_data[1] = 0;
@@ -1804,7 +1805,7 @@ static void elink_update_pfc_bmac2(struct elink_params *params,
val = 0x3; /* Enable RX and TX */
if (is_lb) {
val |= 0x4; /* Local loopback */
- PMD_DRV_LOG(DEBUG, "enable bmac loopback");
+ PMD_DRV_LOG(DEBUG, sc, "enable bmac loopback");
}
/* When PFC enabled, Pass pause frames towards the NIG. */
if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED)
@@ -1898,7 +1899,7 @@ static void elink_update_pfc_nig(struct elink_params *params,
int set_pfc = params->feature_config_flags &
ELINK_FEATURE_CONFIG_PFC_ENABLED;
- PMD_DRV_LOG(DEBUG, "updating pfc nig parameters");
+ PMD_DRV_LOG(DEBUG, sc, "updating pfc nig parameters");
/* When NIG_LLH0_XCM_MASK_REG_LLHX_XCM_MASK_BCN bit is set
* MAC control frames (that are not pause packets)
@@ -2010,7 +2011,7 @@ elink_status_t elink_update_pfc(struct elink_params *params,
if (!vars->link_up)
return elink_status;
- PMD_DRV_LOG(DEBUG, "About to update PFC in BMAC");
+ PMD_DRV_LOG(DEBUG, sc, "About to update PFC in BMAC");
if (CHIP_IS_E3(sc)) {
if (vars->mac_type == ELINK_MAC_TYPE_XMAC)
@@ -2020,7 +2021,7 @@ elink_status_t elink_update_pfc(struct elink_params *params,
if ((val &
(MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))
== 0) {
- PMD_DRV_LOG(DEBUG, "About to update PFC in EMAC");
+ PMD_DRV_LOG(DEBUG, sc, "About to update PFC in EMAC");
elink_emac_enable(params, vars, 0);
return elink_status;
}
@@ -2049,7 +2050,7 @@ static elink_status_t elink_bmac1_enable(struct elink_params *params,
uint32_t wb_data[2];
uint32_t val;
- PMD_DRV_LOG(DEBUG, "Enabling BigMAC1");
+ PMD_DRV_LOG(DEBUG, sc, "Enabling BigMAC1");
/* XGXS control */
wb_data[0] = 0x3c;
@@ -2068,7 +2069,7 @@ static elink_status_t elink_bmac1_enable(struct elink_params *params,
val = 0x3;
if (is_lb) {
val |= 0x4;
- PMD_DRV_LOG(DEBUG, "enable bmac loopback");
+ PMD_DRV_LOG(DEBUG, sc, "enable bmac loopback");
}
wb_data[0] = val;
wb_data[1] = 0;
@@ -2109,7 +2110,7 @@ static elink_status_t elink_bmac2_enable(struct elink_params *params,
NIG_REG_INGRESS_BMAC0_MEM;
uint32_t wb_data[2];
- PMD_DRV_LOG(DEBUG, "Enabling BigMAC2");
+ PMD_DRV_LOG(DEBUG, sc, "Enabling BigMAC2");
wb_data[0] = 0;
wb_data[1] = 0;
@@ -2247,7 +2248,7 @@ static elink_status_t elink_pbf_update(struct elink_params *params,
/* Wait for init credit */
init_crd = REG_RD(sc, PBF_REG_P0_INIT_CRD + port * 4);
crd = REG_RD(sc, PBF_REG_P0_CREDIT + port * 8);
- PMD_DRV_LOG(DEBUG, "init_crd 0x%x crd 0x%x", init_crd, crd);
+ PMD_DRV_LOG(DEBUG, sc, "init_crd 0x%x crd 0x%x", init_crd, crd);
while ((init_crd != crd) && count) {
DELAY(1000 * 5);
@@ -2256,7 +2257,7 @@ static elink_status_t elink_pbf_update(struct elink_params *params,
}
crd = REG_RD(sc, PBF_REG_P0_CREDIT + port * 8);
if (init_crd != crd) {
- PMD_DRV_LOG(DEBUG, "BUG! init_crd 0x%x != crd 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "BUG! init_crd 0x%x != crd 0x%x",
init_crd, crd);
return ELINK_STATUS_ERROR;
}
@@ -2283,13 +2284,13 @@ static elink_status_t elink_pbf_update(struct elink_params *params,
init_crd = thresh + 553 - 22;
break;
default:
- PMD_DRV_LOG(DEBUG, "Invalid line_speed 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Invalid line_speed 0x%x",
line_speed);
return ELINK_STATUS_ERROR;
}
}
REG_WR(sc, PBF_REG_P0_INIT_CRD + port * 4, init_crd);
- PMD_DRV_LOG(DEBUG, "PBF updated to speed %d credit %d",
+ PMD_DRV_LOG(DEBUG, sc, "PBF updated to speed %d credit %d",
line_speed, init_crd);
/* Probe the credit changes */
@@ -2379,7 +2380,7 @@ static elink_status_t elink_cl22_write(struct bnx2x_softc *sc,
}
}
if (tmp & EMAC_MDIO_COMM_START_BUSY) {
- PMD_DRV_LOG(DEBUG, "write phy register failed");
+ PMD_DRV_LOG(DEBUG, sc, "write phy register failed");
rc = ELINK_STATUS_TIMEOUT;
}
REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode);
@@ -2415,7 +2416,7 @@ static elink_status_t elink_cl22_read(struct bnx2x_softc *sc,
}
}
if (val & EMAC_MDIO_COMM_START_BUSY) {
- PMD_DRV_LOG(DEBUG, "read phy register failed");
+ PMD_DRV_LOG(DEBUG, sc, "read phy register failed");
*ret_val = 0;
rc = ELINK_STATUS_TIMEOUT;
@@ -2456,7 +2457,7 @@ static elink_status_t elink_cl45_read(struct bnx2x_softc *sc,
}
}
if (val & EMAC_MDIO_COMM_START_BUSY) {
- PMD_DRV_LOG(DEBUG, "read phy register failed");
+ PMD_DRV_LOG(DEBUG, sc, "read phy register failed");
elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout"
*ret_val = 0;
@@ -2480,7 +2481,7 @@ static elink_status_t elink_cl45_read(struct bnx2x_softc *sc,
}
}
if (val & EMAC_MDIO_COMM_START_BUSY) {
- PMD_DRV_LOG(DEBUG, "read phy register failed");
+ PMD_DRV_LOG(DEBUG, sc, "read phy register failed");
elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout"
*ret_val = 0;
@@ -2532,7 +2533,7 @@ static elink_status_t elink_cl45_write(struct bnx2x_softc *sc,
}
}
if (tmp & EMAC_MDIO_COMM_START_BUSY) {
- PMD_DRV_LOG(DEBUG, "write phy register failed");
+ PMD_DRV_LOG(DEBUG, sc, "write phy register failed");
elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout"
rc = ELINK_STATUS_TIMEOUT;
@@ -2554,7 +2555,7 @@ static elink_status_t elink_cl45_write(struct bnx2x_softc *sc,
}
}
if (tmp & EMAC_MDIO_COMM_START_BUSY) {
- PMD_DRV_LOG(DEBUG, "write phy register failed");
+ PMD_DRV_LOG(DEBUG, sc, "write phy register failed");
elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout"
rc = ELINK_STATUS_TIMEOUT;
@@ -2677,7 +2678,7 @@ static elink_status_t elink_eee_set_timers(struct elink_params *params,
} else if ((params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI) &&
(params->eee_mode & ELINK_EEE_MODE_OVERRIDE_NVRAM) &&
(params->eee_mode & ELINK_EEE_MODE_OUTPUT_TIME)) {
- PMD_DRV_LOG(DEBUG, "Error: Tx LPI is enabled with timer 0");
+ PMD_DRV_LOG(DEBUG, sc, "Error: Tx LPI is enabled with timer 0");
return ELINK_STATUS_ERROR;
}
@@ -2744,11 +2745,11 @@ static elink_status_t elink_eee_advertise(struct elink_phy *phy,
REG_WR(sc, MISC_REG_CPMU_LP_MASK_EXT_P0 + (params->port << 2), 0xfc20);
if (modes & SHMEM_EEE_10G_ADV) {
- PMD_DRV_LOG(DEBUG, "Advertise 10GBase-T EEE");
+ PMD_DRV_LOG(DEBUG, sc, "Advertise 10GBase-T EEE");
val |= 0x8;
}
if (modes & SHMEM_EEE_1G_ADV) {
- PMD_DRV_LOG(DEBUG, "Advertise 1GBase-T EEE");
+ PMD_DRV_LOG(DEBUG, sc, "Advertise 1GBase-T EEE");
val |= 0x4;
}
@@ -2788,7 +2789,7 @@ static void elink_eee_an_resolve(struct elink_phy *phy,
if (adv & 0x2) {
if (vars->line_speed == ELINK_SPEED_100)
neg = 1;
- PMD_DRV_LOG(DEBUG, "EEE negotiated - 100M");
+ PMD_DRV_LOG(DEBUG, sc, "EEE negotiated - 100M");
}
}
if (lp & 0x14) {
@@ -2796,7 +2797,7 @@ static void elink_eee_an_resolve(struct elink_phy *phy,
if (adv & 0x14) {
if (vars->line_speed == ELINK_SPEED_1000)
neg = 1;
- PMD_DRV_LOG(DEBUG, "EEE negotiated - 1G");
+ PMD_DRV_LOG(DEBUG, sc, "EEE negotiated - 1G");
}
}
if (lp & 0x68) {
@@ -2804,7 +2805,7 @@ static void elink_eee_an_resolve(struct elink_phy *phy,
if (adv & 0x68) {
if (vars->line_speed == ELINK_SPEED_10000)
neg = 1;
- PMD_DRV_LOG(DEBUG, "EEE negotiated - 10G");
+ PMD_DRV_LOG(DEBUG, sc, "EEE negotiated - 10G");
}
}
@@ -2812,7 +2813,7 @@ static void elink_eee_an_resolve(struct elink_phy *phy,
vars->eee_status |= (lp_adv << SHMEM_EEE_LP_ADV_STATUS_SHIFT);
if (neg) {
- PMD_DRV_LOG(DEBUG, "EEE is active");
+ PMD_DRV_LOG(DEBUG, sc, "EEE is active");
vars->eee_status |= SHMEM_EEE_ACTIVE_BIT;
}
}
@@ -2842,7 +2843,7 @@ static void elink_bsc_module_sel(struct elink_params *params)
e3_cmn_pin_cfg));
i2c_val[I2C_BSC0] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX0_MASK) > 0;
i2c_val[I2C_BSC1] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX1_MASK) > 0;
- PMD_DRV_LOG(DEBUG, "Setting BSC switch");
+ PMD_DRV_LOG(DEBUG, sc, "Setting BSC switch");
for (idx = 0; idx < I2C_SWITCH_WIDTH; idx++)
elink_set_cfg_pin(sc, i2c_pins[idx], i2c_val[idx]);
}
@@ -2858,7 +2859,7 @@ static elink_status_t elink_bsc_read(struct elink_params *params,
elink_status_t rc = ELINK_STATUS_OK;
if (xfer_cnt > 16) {
- PMD_DRV_LOG(DEBUG, "invalid xfer_cnt %d. Max is 16 bytes",
+ PMD_DRV_LOG(DEBUG, sc, "invalid xfer_cnt %d. Max is 16 bytes",
xfer_cnt);
return ELINK_STATUS_ERROR;
}
@@ -2890,7 +2891,7 @@ static elink_status_t elink_bsc_read(struct elink_params *params,
DELAY(10);
val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND);
if (i++ > 1000) {
- PMD_DRV_LOG(DEBUG, "wr 0 byte timed out after %d try",
+ PMD_DRV_LOG(DEBUG, sc, "wr 0 byte timed out after %d try",
i);
rc = ELINK_STATUS_TIMEOUT;
break;
@@ -2914,7 +2915,8 @@ static elink_status_t elink_bsc_read(struct elink_params *params,
DELAY(10);
val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND);
if (i++ > 1000) {
- PMD_DRV_LOG(DEBUG, "rd op timed out after %d try", i);
+ PMD_DRV_LOG(DEBUG, sc,
+ "rd op timed out after %d try", i);
rc = ELINK_STATUS_TIMEOUT;
break;
}
@@ -3059,7 +3061,7 @@ static void elink_serdes_deassert(struct bnx2x_softc *sc, uint8_t port)
{
uint32_t val;
- PMD_DRV_LOG(DEBUG, "elink_serdes_deassert");
+ PMD_DRV_LOG(DEBUG, sc, "elink_serdes_deassert");
val = ELINK_SERDES_RESET_BITS << (port * 16);
@@ -3094,7 +3096,7 @@ static void elink_xgxs_deassert(struct elink_params *params)
struct bnx2x_softc *sc = params->sc;
uint8_t port;
uint32_t val;
- PMD_DRV_LOG(DEBUG, "elink_xgxs_deassert");
+ PMD_DRV_LOG(DEBUG, sc, "elink_xgxs_deassert");
port = params->port;
val = ELINK_XGXS_RESET_BITS << (port * 16);
@@ -3145,7 +3147,7 @@ static void elink_calc_ieee_aneg_adv(struct elink_phy *phy,
*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
break;
}
- PMD_DRV_LOG(DEBUG, "ieee_fc = 0x%x", *ieee_fc);
+ PMD_DRV_LOG(DEBUG, params->sc, "ieee_fc = 0x%x", *ieee_fc);
}
static void set_phy_vars(struct elink_params *params, struct elink_vars *vars)
@@ -3179,7 +3181,7 @@ static void set_phy_vars(struct elink_params *params, struct elink_vars *vars)
ELINK_SPEED_AUTO_NEG)
vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED;
- PMD_DRV_LOG(DEBUG, "req_flow_ctrl %x, req_line_speed %x,"
+ PMD_DRV_LOG(DEBUG, params->sc, "req_flow_ctrl %x, req_line_speed %x,"
" speed_cap_mask %x",
params->phy[actual_phy_idx].req_flow_ctrl,
params->phy[actual_phy_idx].req_line_speed,
@@ -3210,7 +3212,7 @@ static void elink_ext_phy_set_pause(struct elink_params *params,
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
val |= MDIO_AN_REG_ADV_PAUSE_PAUSE;
}
- PMD_DRV_LOG(DEBUG, "Ext phy AN advertize 0x%x", val);
+ PMD_DRV_LOG(DEBUG, sc, "Ext phy AN advertize 0x%x", val);
elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val);
}
@@ -3289,7 +3291,7 @@ static void elink_ext_phy_update_adv_fc(struct elink_phy *phy,
}
pause_result = (ld_pause & MDIO_AN_REG_ADV_PAUSE_MASK) >> 8;
pause_result |= (lp_pause & MDIO_AN_REG_ADV_PAUSE_MASK) >> 10;
- PMD_DRV_LOG(DEBUG, "Ext PHY pause result 0x%x", pause_result);
+ PMD_DRV_LOG(DEBUG, sc, "Ext PHY pause result 0x%x", pause_result);
elink_pause_resolve(vars, pause_result);
}
@@ -3358,7 +3360,7 @@ static void elink_warpcore_enable_AN_KR2(struct elink_phy *phy,
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0157},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0620}
};
- PMD_DRV_LOG(DEBUG, "Enabling 20G-KR2");
+ PMD_DRV_LOG(DEBUG, sc, "Enabling 20G-KR2");
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL49_USERB0_CTRL, (3 << 6));
@@ -3395,7 +3397,7 @@ static void elink_disable_kr2(struct elink_params *params,
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002},
{MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000}
};
- PMD_DRV_LOG(DEBUG, "Disabling 20G-KR2");
+ PMD_DRV_LOG(DEBUG, sc, "Disabling 20G-KR2");
for (i = 0; i < ARRAY_SIZE(reg_set); i++)
elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
@@ -3411,7 +3413,7 @@ static void elink_warpcore_set_lpi_passthrough(struct elink_phy *phy,
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "Configure WC for LPI pass through");
+ PMD_DRV_LOG(DEBUG, sc, "Configure WC for LPI pass through");
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_EEE_COMBO_CONTROL0, 0x7c);
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
@@ -3449,7 +3451,7 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
{MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2},
{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0},
};
- PMD_DRV_LOG(DEBUG, "Enable Auto Negotiation for KR");
+ PMD_DRV_LOG(DEBUG, sc, "Enable Auto Negotiation for KR");
/* Set to default registers that may be overriden by 10G force */
for (i = 0; i < ARRAY_SIZE(reg_set); i++)
elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
@@ -3471,7 +3473,7 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
/* Enable CL37 1G Parallel Detect */
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, addr, 0x1);
- PMD_DRV_LOG(DEBUG, "Advertize 1G");
+ PMD_DRV_LOG(DEBUG, sc, "Advertize 1G");
}
if (((vars->line_speed == ELINK_SPEED_AUTO_NEG) &&
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
@@ -3485,7 +3487,7 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
MDIO_WC_REG_PAR_DET_10G_CTRL, 1);
elink_set_aer_mmd(params, phy);
- PMD_DRV_LOG(DEBUG, "Advertize 10G");
+ PMD_DRV_LOG(DEBUG, sc, "Advertize 10G");
}
/* Set Transmit PMD settings */
@@ -3522,7 +3524,7 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL,
1);
- PMD_DRV_LOG(DEBUG, "Enable CL37 BAM on KR");
+ PMD_DRV_LOG(DEBUG, sc, "Enable CL37 BAM on KR");
}
/* Advertise pause */
@@ -3859,7 +3861,7 @@ static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy,
elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_COMBO_IEEE0_MIICTRL,
0x1000);
- PMD_DRV_LOG(DEBUG, "set SGMII AUTONEG");
+ PMD_DRV_LOG(DEBUG, sc, "set SGMII AUTONEG");
} else {
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16);
@@ -3874,7 +3876,7 @@ static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy,
val16 |= 0x0040;
break;
default:
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Speed not supported: 0x%x",
phy->req_line_speed);
return;
@@ -3886,11 +3888,11 @@ static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy,
elink_cl45_write(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16);
- PMD_DRV_LOG(DEBUG, "set SGMII force speed %d",
+ PMD_DRV_LOG(DEBUG, sc, "set SGMII force speed %d",
phy->req_line_speed);
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16);
- PMD_DRV_LOG(DEBUG, " (readback) %x", val16);
+ PMD_DRV_LOG(DEBUG, sc, " (readback) %x", val16);
}
/* SGMII Slave mode and disable signal detect */
@@ -4001,7 +4003,7 @@ static elink_status_t elink_get_mod_abs_int_cfg(struct bnx2x_softc *sc,
*/
if ((cfg_pin < PIN_CFG_GPIO0_P0) ||
(cfg_pin > PIN_CFG_GPIO3_P1)) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"No cfg pin %x for module detect indication",
cfg_pin);
return ELINK_STATUS_ERROR;
@@ -4093,7 +4095,7 @@ static void elink_warpcore_config_runtime(struct elink_phy *phy,
0x1200);
vars->rx_tx_asic_rst--;
- PMD_DRV_LOG(DEBUG, "0x%x retry left",
+ PMD_DRV_LOG(DEBUG, sc, "0x%x retry left",
vars->rx_tx_asic_rst);
}
break;
@@ -4115,10 +4117,10 @@ static void elink_warpcore_config_sfi(struct elink_phy *phy,
if ((params->req_line_speed[ELINK_LINK_CONFIG_IDX(ELINK_INT_PHY)] ==
ELINK_SPEED_10000) &&
(phy->media_type != ELINK_ETH_PHY_SFP_1G_FIBER)) {
- PMD_DRV_LOG(DEBUG, "Setting 10G SFI");
+ PMD_DRV_LOG(DEBUG, params->sc, "Setting 10G SFI");
elink_warpcore_set_10G_XFI(phy, params, 0);
} else {
- PMD_DRV_LOG(DEBUG, "Setting 1G Fiber");
+ PMD_DRV_LOG(DEBUG, params->sc, "Setting 1G Fiber");
elink_warpcore_set_sgmii_speed(phy, params, 1, 0);
}
}
@@ -4135,7 +4137,7 @@ static void elink_sfp_e3_set_transmitter(struct elink_params *params,
dev_info.port_hw_config[port].e3_sfp_ctrl)) &
PORT_HW_CFG_E3_TX_LASER_MASK;
/* Set the !tx_en since this pin is DISABLE_TX_LASER */
- PMD_DRV_LOG(DEBUG, "Setting WC TX to %d", tx_en);
+ PMD_DRV_LOG(DEBUG, sc, "Setting WC TX to %d", tx_en);
/* For 20G, the expected pin to be used is 3 pins after the current */
elink_set_cfg_pin(sc, cfg_pin, tx_en ^ 1);
@@ -4156,7 +4158,7 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
dev_info.port_hw_config[params->port].
default_cfg)) &
PORT_HW_CFG_NET_SERDES_IF_MASK);
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Begin Warpcore init, link_speed %d, "
"serdes_net_if = 0x%x", vars->line_speed, serdes_net_if);
elink_set_aer_mmd(params, phy);
@@ -4167,7 +4169,7 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
((phy->req_line_speed == ELINK_SPEED_100) ||
(phy->req_line_speed == ELINK_SPEED_10)))) {
vars->phy_flags |= PHY_SGMII_FLAG;
- PMD_DRV_LOG(DEBUG, "Setting SGMII mode");
+ PMD_DRV_LOG(DEBUG, sc, "Setting SGMII mode");
elink_warpcore_clear_regs(phy, params, lane);
elink_warpcore_set_sgmii_speed(phy, params, 0, 1);
} else {
@@ -4177,7 +4179,7 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
if (params->loopback_mode != ELINK_LOOPBACK_EXT)
elink_warpcore_enable_AN_KR(phy, params, vars);
else {
- PMD_DRV_LOG(DEBUG, "Setting KR 10G-Force");
+ PMD_DRV_LOG(DEBUG, sc, "Setting KR 10G-Force");
elink_warpcore_set_10G_KR(phy, params);
}
break;
@@ -4185,14 +4187,14 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
case PORT_HW_CFG_NET_SERDES_IF_XFI:
elink_warpcore_clear_regs(phy, params, lane);
if (vars->line_speed == ELINK_SPEED_10000) {
- PMD_DRV_LOG(DEBUG, "Setting 10G XFI");
+ PMD_DRV_LOG(DEBUG, sc, "Setting 10G XFI");
elink_warpcore_set_10G_XFI(phy, params, 1);
} else {
if (ELINK_SINGLE_MEDIA_DIRECT(params)) {
- PMD_DRV_LOG(DEBUG, "1G Fiber");
+ PMD_DRV_LOG(DEBUG, sc, "1G Fiber");
fiber_mode = 1;
} else {
- PMD_DRV_LOG(DEBUG, "10/100/1G SGMII");
+ PMD_DRV_LOG(DEBUG, sc, "10/100/1G SGMII");
fiber_mode = 0;
}
elink_warpcore_set_sgmii_speed(phy,
@@ -4221,10 +4223,10 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
case PORT_HW_CFG_NET_SERDES_IF_DXGXS:
if (vars->line_speed != ELINK_SPEED_20000) {
- PMD_DRV_LOG(DEBUG, "Speed not supported yet");
+ PMD_DRV_LOG(DEBUG, sc, "Speed not supported yet");
return 0;
}
- PMD_DRV_LOG(DEBUG, "Setting 20G DXGXS");
+ PMD_DRV_LOG(DEBUG, sc, "Setting 20G DXGXS");
elink_warpcore_set_20G_DXGXS(sc, phy, lane);
/* Issue Module detection */
@@ -4234,12 +4236,12 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
if (!params->loopback_mode) {
elink_warpcore_enable_AN_KR(phy, params, vars);
} else {
- PMD_DRV_LOG(DEBUG, "Setting KR 20G-Force");
+ PMD_DRV_LOG(DEBUG, sc, "Setting KR 20G-Force");
elink_warpcore_set_20G_force_KR2(phy, params);
}
break;
default:
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Unsupported Serdes Net Interface 0x%x",
serdes_net_if);
return 0;
@@ -4248,7 +4250,7 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy,
/* Take lane out of reset after configuration is finished */
elink_warpcore_reset_lane(sc, phy, 0);
- PMD_DRV_LOG(DEBUG, "Exit config init");
+ PMD_DRV_LOG(DEBUG, sc, "Exit config init");
return 0;
}
@@ -4313,7 +4315,7 @@ static void elink_set_warpcore_loopback(struct elink_phy *phy,
struct bnx2x_softc *sc = params->sc;
uint16_t val16;
uint32_t lane;
- PMD_DRV_LOG(DEBUG, "Setting Warpcore loopback type %x, speed %d",
+ PMD_DRV_LOG(DEBUG, sc, "Setting Warpcore loopback type %x, speed %d",
params->loopback_mode, phy->req_line_speed);
if (phy->req_line_speed < ELINK_SPEED_10000 ||
@@ -4358,7 +4360,7 @@ static void elink_sync_link(struct elink_params *params,
vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP);
if (vars->link_up) {
- PMD_DRV_LOG(DEBUG, "phy link up");
+ PMD_DRV_LOG(DEBUG, sc, "phy link up");
vars->phy_link_up = 1;
vars->duplex = DUPLEX_FULL;
@@ -4436,7 +4438,7 @@ static void elink_sync_link(struct elink_params *params,
vars->mac_type = ELINK_MAC_TYPE_EMAC;
}
} else { /* Link down */
- PMD_DRV_LOG(DEBUG, "phy link down");
+ PMD_DRV_LOG(DEBUG, sc, "phy link down");
vars->phy_link_up = 0;
@@ -4493,7 +4495,7 @@ void elink_link_status_update(struct elink_params *params,
params->phy[ELINK_EXT_PHY2].media_type =
(media_types & PORT_HW_CFG_MEDIA_TYPE_PHY2_MASK) >>
PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT;
- PMD_DRV_LOG(DEBUG, "media_types = 0x%x", media_types);
+ PMD_DRV_LOG(DEBUG, sc, "media_types = 0x%x", media_types);
/* Sync AEU offset */
sync_offset = params->shmem_base +
@@ -4514,9 +4516,9 @@ void elink_link_status_update(struct elink_params *params,
vars->link_attr_sync = SHMEM2_RD(sc,
link_attr_sync[params->port]);
- PMD_DRV_LOG(DEBUG, "link_status 0x%x phy_link_up %x int_mask 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "link_status 0x%x phy_link_up %x int_mask 0x%x",
vars->link_status, vars->phy_link_up, vars->aeu_int_mask);
- PMD_DRV_LOG(DEBUG, "line_speed %x duplex %x flow_ctrl 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "line_speed %x duplex %x flow_ctrl 0x%x",
vars->line_speed, vars->duplex, vars->flow_ctrl);
}
@@ -4577,7 +4579,7 @@ static elink_status_t elink_reset_unicore(struct elink_params *params,
elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, params->port); // "Warning: PHY was not initialized,"
// " Port %d",
- PMD_DRV_LOG(DEBUG, "BUG! XGXS is still in reset!");
+ PMD_DRV_LOG(DEBUG, sc, "BUG! XGXS is still in reset!");
return ELINK_STATUS_ERROR;
}
@@ -4636,7 +4638,7 @@ static void elink_set_parallel_detection(struct elink_phy *phy,
control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
else
control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
- PMD_DRV_LOG(DEBUG, "phy->speed_cap_mask = 0x%x, control2 = 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "phy->speed_cap_mask = 0x%x, control2 = 0x%x",
phy->speed_cap_mask, control2);
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_SERDES_DIGITAL,
@@ -4644,7 +4646,7 @@ static void elink_set_parallel_detection(struct elink_phy *phy,
if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
(phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
- PMD_DRV_LOG(DEBUG, "XGXS");
+ PMD_DRV_LOG(DEBUG, sc, "XGXS");
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_10G_PARALLEL_DETECT,
@@ -4797,7 +4799,7 @@ static void elink_program_serdes(struct elink_phy *phy,
MDIO_REG_BANK_SERDES_DIGITAL,
MDIO_SERDES_DIGITAL_MISC1, &reg_val);
/* Clearing the speed value before setting the right speed */
- PMD_DRV_LOG(DEBUG, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x", reg_val);
+ PMD_DRV_LOG(DEBUG, sc, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x", reg_val);
reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK |
MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL);
@@ -4865,7 +4867,7 @@ static void elink_restart_autoneg(struct elink_phy *phy,
struct bnx2x_softc *sc = params->sc;
uint16_t mii_control;
- PMD_DRV_LOG(DEBUG, "elink_restart_autoneg");
+ PMD_DRV_LOG(DEBUG, sc, "elink_restart_autoneg");
/* Enable and restart BAM/CL37 aneg */
if (enable_cl73) {
@@ -4885,7 +4887,7 @@ static void elink_restart_autoneg(struct elink_phy *phy,
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_COMBO_IEEE0,
MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control);
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"elink_restart_autoneg mii_control before = 0x%x",
mii_control);
CL22_WR_OVER_CL45(sc, phy,
@@ -4944,7 +4946,7 @@ static void elink_initialize_sgmii_process(struct elink_phy *phy,
break;
default:
/* Invalid speed for SGMII */
- PMD_DRV_LOG(DEBUG, "Invalid line_speed 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Invalid line_speed 0x%x",
vars->line_speed);
break;
}
@@ -4979,7 +4981,7 @@ static elink_status_t elink_direct_parallel_detect_used(struct elink_phy *phy,
MDIO_REG_BANK_SERDES_DIGITAL,
MDIO_SERDES_DIGITAL_A_1000X_STATUS2, &status2_1000x);
if (status2_1000x & MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED) {
- PMD_DRV_LOG(DEBUG, "1G parallel detect link on port %d",
+ PMD_DRV_LOG(DEBUG, sc, "1G parallel detect link on port %d",
params->port);
return ELINK_STATUS_ERROR;
}
@@ -4989,7 +4991,7 @@ static elink_status_t elink_direct_parallel_detect_used(struct elink_phy *phy,
MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS, &pd_10g);
if (pd_10g & MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK) {
- PMD_DRV_LOG(DEBUG, "10G parallel detect link on port %d",
+ PMD_DRV_LOG(DEBUG, sc, "10G parallel detect link on port %d",
params->port);
return ELINK_STATUS_ERROR;
}
@@ -5020,7 +5022,7 @@ static void elink_update_adv_fc(struct elink_phy *phy,
MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK) >> 8;
pause_result |= (lp_pause &
MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK) >> 10;
- PMD_DRV_LOG(DEBUG, "pause_result CL73 0x%x", pause_result);
+ PMD_DRV_LOG(DEBUG, sc, "pause_result CL73 0x%x", pause_result);
} else {
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_COMBO_IEEE0,
@@ -5033,7 +5035,7 @@ static void elink_update_adv_fc(struct elink_phy *phy,
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) >> 5;
pause_result |= (lp_pause &
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) >> 7;
- PMD_DRV_LOG(DEBUG, "pause_result CL37 0x%x", pause_result);
+ PMD_DRV_LOG(DEBUG, sc, "pause_result CL37 0x%x", pause_result);
}
elink_pause_resolve(vars, pause_result);
@@ -5062,7 +5064,7 @@ static void elink_flow_ctrl_resolve(struct elink_phy *phy,
}
elink_update_adv_fc(phy, params, vars, gp_status);
}
- PMD_DRV_LOG(DEBUG, "flow_ctrl 0x%x", vars->flow_ctrl);
+ PMD_DRV_LOG(DEBUG, params->sc, "flow_ctrl 0x%x", vars->flow_ctrl);
}
static void elink_check_fallback_to_cl37(struct elink_phy *phy,
@@ -5070,13 +5072,13 @@ static void elink_check_fallback_to_cl37(struct elink_phy *phy,
{
struct bnx2x_softc *sc = params->sc;
uint16_t rx_status, ustat_val, cl37_fsm_received;
- PMD_DRV_LOG(DEBUG, "elink_check_fallback_to_cl37");
+ PMD_DRV_LOG(DEBUG, sc, "elink_check_fallback_to_cl37");
/* Step 1: Make sure signal is detected */
CL22_RD_OVER_CL45(sc, phy,
MDIO_REG_BANK_RX0, MDIO_RX0_RX_STATUS, &rx_status);
if ((rx_status & MDIO_RX0_RX_STATUS_SIGDET) !=
(MDIO_RX0_RX_STATUS_SIGDET)) {
- PMD_DRV_LOG(DEBUG, "Signal is not detected. Restoring CL73."
+ PMD_DRV_LOG(DEBUG, sc, "Signal is not detected. Restoring CL73."
"rx_status(0x80b0) = 0x%x", rx_status);
CL22_WR_OVER_CL45(sc, phy,
MDIO_REG_BANK_CL73_IEEEB0,
@@ -5093,7 +5095,7 @@ static void elink_check_fallback_to_cl37(struct elink_phy *phy,
MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) !=
(MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK |
MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) {
- PMD_DRV_LOG(DEBUG, "CL73 state-machine is not stable. "
+ PMD_DRV_LOG(DEBUG, sc, "CL73 state-machine is not stable. "
"ustat_val(0x8371) = 0x%x", ustat_val);
return;
}
@@ -5108,7 +5110,7 @@ static void elink_check_fallback_to_cl37(struct elink_phy *phy,
MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) !=
(MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG |
MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) {
- PMD_DRV_LOG(DEBUG, "No CL37 FSM were received. "
+ PMD_DRV_LOG(DEBUG, sc, "No CL37 FSM were received. "
"misc_rx_status(0x8330) = 0x%x", cl37_fsm_received);
return;
}
@@ -5124,7 +5126,7 @@ static void elink_check_fallback_to_cl37(struct elink_phy *phy,
MDIO_CL73_IEEEB0_CL73_AN_CONTROL, 0);
/* Restart CL37 autoneg */
elink_restart_autoneg(phy, params, 0);
- PMD_DRV_LOG(DEBUG, "Disabling CL73, and restarting CL37 autoneg");
+ PMD_DRV_LOG(DEBUG, sc, "Disabling CL73, and restarting CL37 autoneg");
}
static void elink_xgxs_an_resolve(struct elink_phy *phy,
@@ -5148,7 +5150,7 @@ static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy,
if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG)
vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED;
if (is_link_up) {
- PMD_DRV_LOG(DEBUG, "phy link up");
+ PMD_DRV_LOG(DEBUG, params->sc, "phy link up");
vars->phy_link_up = 1;
vars->link_status |= LINK_STATUS_LINK_UP;
@@ -5189,7 +5191,7 @@ static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy,
case ELINK_GP_STATUS_5G:
case ELINK_GP_STATUS_6G:
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, params->sc,
"link speed unsupported gp_status 0x%x",
speed_mask);
return ELINK_STATUS_ERROR;
@@ -5209,13 +5211,13 @@ static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy,
vars->link_status |= ELINK_LINK_20GTFD;
break;
default:
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, params->sc,
"link speed unsupported gp_status 0x%x",
speed_mask);
return ELINK_STATUS_ERROR;
}
} else { /* link_down */
- PMD_DRV_LOG(DEBUG, "phy link down");
+ PMD_DRV_LOG(DEBUG, params->sc, "phy link down");
vars->phy_link_up = 0;
@@ -5223,7 +5225,7 @@ static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy,
vars->flow_ctrl = ELINK_FLOW_CTRL_NONE;
vars->mac_type = ELINK_MAC_TYPE_NONE;
}
- PMD_DRV_LOG(DEBUG, " phy_link_up %x line_speed %d",
+ PMD_DRV_LOG(DEBUG, params->sc, " phy_link_up %x line_speed %d",
vars->phy_link_up, vars->line_speed);
return ELINK_STATUS_OK;
}
@@ -5246,7 +5248,7 @@ static uint8_t elink_link_settings_status(struct elink_phy *phy,
if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS)
link_up = 1;
speed_mask = gp_status & ELINK_GP_STATUS_SPEED_MASK;
- PMD_DRV_LOG(DEBUG, "gp_status 0x%x, is_link_up %d, speed_mask 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "gp_status 0x%x, is_link_up %d, speed_mask 0x%x",
gp_status, link_up, speed_mask);
rc = elink_get_link_speed_duplex(phy, params, vars, link_up, speed_mask,
duplex);
@@ -5296,7 +5298,7 @@ static uint8_t elink_link_settings_status(struct elink_phy *phy,
LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE;
}
- PMD_DRV_LOG(DEBUG, "duplex %x flow_ctrl 0x%x link_status 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "duplex %x flow_ctrl 0x%x link_status 0x%x",
vars->duplex, vars->flow_ctrl, vars->link_status);
return rc;
}
@@ -5322,7 +5324,7 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy,
uint16_t temp_link_up;
elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 1, &temp_link_up);
elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 1, &link_up);
- PMD_DRV_LOG(DEBUG, "PCS RX link status = 0x%x-->0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "PCS RX link status = 0x%x-->0x%x",
temp_link_up, link_up);
link_up &= (1 << 2);
if (link_up)
@@ -5330,7 +5332,7 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy,
} else {
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_GP2_STATUS_GP_2_1, &gp_status1);
- PMD_DRV_LOG(DEBUG, "0x81d1 = 0x%x", gp_status1);
+ PMD_DRV_LOG(DEBUG, sc, "0x81d1 = 0x%x", gp_status1);
/* Check for either KR, 1G, or AN up. */
link_up = ((gp_status1 >> 8) |
(gp_status1 >> 12) | (gp_status1)) & (1 << lane);
@@ -5400,7 +5402,7 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy,
elink_cl45_read(sc, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_GP2_STATUS_GP_2_3, &gp_speed);
}
- PMD_DRV_LOG(DEBUG, "lane %d gp_speed 0x%x", lane, gp_speed);
+ PMD_DRV_LOG(DEBUG, sc, "lane %d gp_speed 0x%x", lane, gp_speed);
if ((lane & 1) == 0)
gp_speed <<= 8;
@@ -5416,7 +5418,7 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy,
(!(phy->flags & ELINK_FLAGS_WC_DUAL_MODE)))
vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY;
- PMD_DRV_LOG(DEBUG, "duplex %x flow_ctrl 0x%x link_status 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "duplex %x flow_ctrl 0x%x link_status 0x%x",
vars->duplex, vars->flow_ctrl, vars->link_status);
return rc;
}
@@ -5463,7 +5465,7 @@ static elink_status_t elink_emac_program(struct elink_params *params,
uint8_t port = params->port;
uint16_t mode = 0;
- PMD_DRV_LOG(DEBUG, "setting link speed & duplex");
+ PMD_DRV_LOG(DEBUG, sc, "setting link speed & duplex");
elink_bits_dis(sc, GRCBASE_EMAC0 + port * 0x400 +
EMAC_REG_EMAC_MODE,
(EMAC_MODE_25G_MODE |
@@ -5487,7 +5489,8 @@ static elink_status_t elink_emac_program(struct elink_params *params,
default:
/* 10G not valid for EMAC */
- PMD_DRV_LOG(DEBUG, "Invalid line_speed 0x%x", vars->line_speed);
+ PMD_DRV_LOG(DEBUG, sc,
+ "Invalid line_speed 0x%x", vars->line_speed);
return ELINK_STATUS_ERROR;
}
@@ -5539,7 +5542,7 @@ static uint8_t elink_xgxs_config_init(struct elink_phy *phy,
if (vars->line_speed != ELINK_SPEED_AUTO_NEG ||
(ELINK_SINGLE_MEDIA_DIRECT(params) &&
params->loopback_mode == ELINK_LOOPBACK_EXT)) {
- PMD_DRV_LOG(DEBUG, "not SGMII, no AN");
+ PMD_DRV_LOG(DEBUG, params->sc, "not SGMII, no AN");
/* Disable autoneg */
elink_set_autoneg(phy, params, vars, 0);
@@ -5548,7 +5551,7 @@ static uint8_t elink_xgxs_config_init(struct elink_phy *phy,
elink_program_serdes(phy, params, vars);
} else { /* AN_mode */
- PMD_DRV_LOG(DEBUG, "not SGMII, AN");
+ PMD_DRV_LOG(DEBUG, params->sc, "not SGMII, AN");
/* AN enabled */
elink_set_brcm_cl37_advertisement(phy, params);
@@ -5565,7 +5568,7 @@ static uint8_t elink_xgxs_config_init(struct elink_phy *phy,
}
} else { /* SGMII mode */
- PMD_DRV_LOG(DEBUG, "SGMII");
+ PMD_DRV_LOG(DEBUG, params->sc, "SGMII");
elink_initialize_sgmii_process(phy, params, vars);
}
@@ -5634,7 +5637,7 @@ static uint16_t elink_wait_reset_complete(struct bnx2x_softc *sc,
elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, params->port); // "Warning: PHY was not initialized,"
// " Port %d",
- PMD_DRV_LOG(DEBUG, "control reg 0x%x (after %d ms)", ctrl, cnt);
+ PMD_DRV_LOG(DEBUG, sc, "control reg 0x%x (after %d ms)", ctrl, cnt);
return cnt;
}
@@ -5652,35 +5655,35 @@ static void elink_link_int_enable(struct elink_params *params)
} else if (params->switch_cfg == ELINK_SWITCH_CFG_10G) {
mask = (ELINK_NIG_MASK_XGXS0_LINK10G |
ELINK_NIG_MASK_XGXS0_LINK_STATUS);
- PMD_DRV_LOG(DEBUG, "enabled XGXS interrupt");
+ PMD_DRV_LOG(DEBUG, sc, "enabled XGXS interrupt");
if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) &&
params->phy[ELINK_INT_PHY].type !=
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) {
mask |= ELINK_NIG_MASK_MI_INT;
- PMD_DRV_LOG(DEBUG, "enabled external phy int");
+ PMD_DRV_LOG(DEBUG, sc, "enabled external phy int");
}
} else { /* SerDes */
mask = ELINK_NIG_MASK_SERDES0_LINK_STATUS;
- PMD_DRV_LOG(DEBUG, "enabled SerDes interrupt");
+ PMD_DRV_LOG(DEBUG, sc, "enabled SerDes interrupt");
if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) &&
params->phy[ELINK_INT_PHY].type !=
PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN) {
mask |= ELINK_NIG_MASK_MI_INT;
- PMD_DRV_LOG(DEBUG, "enabled external phy int");
+ PMD_DRV_LOG(DEBUG, sc, "enabled external phy int");
}
}
elink_bits_en(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, mask);
- PMD_DRV_LOG(DEBUG, "port %x, is_xgxs %x, int_status 0x%x", port,
+ PMD_DRV_LOG(DEBUG, sc, "port %x, is_xgxs %x, int_status 0x%x", port,
(params->switch_cfg == ELINK_SWITCH_CFG_10G),
REG_RD(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4));
- PMD_DRV_LOG(DEBUG, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x",
+ PMD_DRV_LOG(DEBUG, sc, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x",
REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4),
REG_RD(sc, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port * 0x18),
REG_RD(sc,
NIG_REG_SERDES0_STATUS_LINK_STATUS + port * 0x3c));
- PMD_DRV_LOG(DEBUG, " 10G %x, XGXS_LINK %x",
+ PMD_DRV_LOG(DEBUG, sc, " 10G %x, XGXS_LINK %x",
REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK10G + port * 0x68),
REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK_STATUS + port * 0x68));
}
@@ -5696,7 +5699,7 @@ static void elink_rearm_latch_signal(struct bnx2x_softc *sc, uint8_t port,
*/
/* Read Latched signals */
latch_status = REG_RD(sc, NIG_REG_LATCH_STATUS_0 + port * 8);
- PMD_DRV_LOG(DEBUG, "latch_status = 0x%x", latch_status);
+ PMD_DRV_LOG(DEBUG, sc, "latch_status = 0x%x", latch_status);
/* Handle only those with latched-signal=up. */
if (exp_mi_int)
elink_bits_en(sc,
@@ -5748,7 +5751,7 @@ static void elink_link_int_ack(struct elink_params *params,
} else
mask = ELINK_NIG_STATUS_SERDES0_LINK_STATUS;
}
- PMD_DRV_LOG(DEBUG, "Ack link up interrupt with mask 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Ack link up interrupt with mask 0x%x",
mask);
elink_bits_en(sc,
NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4, mask);
@@ -5811,7 +5814,7 @@ static void elink_set_xgxs_loopback(struct elink_phy *phy,
if (phy->req_line_speed != ELINK_SPEED_1000) {
uint32_t md_devad = 0;
- PMD_DRV_LOG(DEBUG, "XGXS 10G loopback enable");
+ PMD_DRV_LOG(DEBUG, sc, "XGXS 10G loopback enable");
if (!CHIP_IS_E3(sc)) {
/* Change the uni_phy_addr in the nig */
@@ -5843,7 +5846,7 @@ static void elink_set_xgxs_loopback(struct elink_phy *phy,
}
} else {
uint16_t mii_ctrl;
- PMD_DRV_LOG(DEBUG, "XGXS 1G loopback enable");
+ PMD_DRV_LOG(DEBUG, sc, "XGXS 1G loopback enable");
elink_cl45_read(sc, phy, 5,
(MDIO_REG_BANK_COMBO_IEEE0 +
(MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)),
@@ -5867,8 +5870,9 @@ elink_status_t elink_set_led(struct elink_params *params,
uint32_t tmp;
uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "elink_set_led: port %x, mode %d", port, mode);
- PMD_DRV_LOG(DEBUG, "speed 0x%x, hw_led_mode 0x%x", speed, hw_led_mode);
+ PMD_DRV_LOG(DEBUG, sc, "elink_set_led: port %x, mode %d", port, mode);
+ PMD_DRV_LOG(DEBUG, sc,
+ "speed 0x%x, hw_led_mode 0x%x", speed, hw_led_mode);
/* In case */
for (phy_idx = ELINK_EXT_PHY1; phy_idx < ELINK_MAX_PHYS; phy_idx++) {
if (params->phy[phy_idx].set_link_led) {
@@ -5987,7 +5991,8 @@ elink_status_t elink_set_led(struct elink_params *params,
default:
rc = ELINK_STATUS_ERROR;
- PMD_DRV_LOG(DEBUG, "elink_set_led: Invalid led mode %d", mode);
+ PMD_DRV_LOG(DEBUG, sc,
+ "elink_set_led: Invalid led mode %d", mode);
break;
}
return rc;
@@ -6054,7 +6059,7 @@ static elink_status_t elink_link_initialize(struct elink_params *params,
if (phy_index == ELINK_EXT_PHY2 &&
(elink_phy_selection(params) ==
PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Not initializing second phy");
continue;
}
@@ -6095,7 +6100,7 @@ static void elink_common_ext_link_reset(__rte_unused struct elink_phy *phy,
MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port);
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port);
- PMD_DRV_LOG(DEBUG, "reset external PHY");
+ PMD_DRV_LOG(DEBUG, sc, "reset external PHY");
}
static elink_status_t elink_update_link_down(struct elink_params *params,
@@ -6104,7 +6109,7 @@ static elink_status_t elink_update_link_down(struct elink_params *params,
struct bnx2x_softc *sc = params->sc;
uint8_t port = params->port;
- PMD_DRV_LOG(DEBUG, "Port %x: Link is down", port);
+ PMD_DRV_LOG(DEBUG, sc, "Port %x: Link is down", port);
elink_set_led(params, vars, ELINK_LED_MODE_OFF, 0);
vars->phy_flags &= ~PHY_PHYSICAL_LINK_FLAG;
/* Indicate no mac active */
@@ -6165,7 +6170,7 @@ static elink_status_t elink_update_link_up(struct elink_params *params,
if (link_10g) {
if (elink_xmac_enable(params, vars, 0) ==
ELINK_STATUS_NO_LINK) {
- PMD_DRV_LOG(DEBUG, "Found errors on XMAC");
+ PMD_DRV_LOG(DEBUG, sc, "Found errors on XMAC");
vars->link_up = 0;
vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
vars->link_status &= ~LINK_STATUS_LINK_UP;
@@ -6177,7 +6182,7 @@ static elink_status_t elink_update_link_up(struct elink_params *params,
if ((vars->eee_status & SHMEM_EEE_ACTIVE_BIT) &&
(vars->eee_status & SHMEM_EEE_LPI_REQUESTED_BIT)) {
- PMD_DRV_LOG(DEBUG, "Enabling LPI assertion");
+ PMD_DRV_LOG(DEBUG, sc, "Enabling LPI assertion");
REG_WR(sc, MISC_REG_CPMU_LP_FW_ENABLE_P0 +
(params->port << 2), 1);
REG_WR(sc, MISC_REG_CPMU_LP_DR_ENABLE, 1);
@@ -6189,7 +6194,7 @@ static elink_status_t elink_update_link_up(struct elink_params *params,
if (link_10g) {
if (elink_bmac_enable(params, vars, 0, 1) ==
ELINK_STATUS_NO_LINK) {
- PMD_DRV_LOG(DEBUG, "Found errors on BMAC");
+ PMD_DRV_LOG(DEBUG, sc, "Found errors on BMAC");
vars->link_up = 0;
vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
vars->link_status &= ~LINK_STATUS_LINK_UP;
@@ -6274,19 +6279,19 @@ elink_status_t elink_link_update(struct elink_params * params,
if (USES_WARPCORE(sc))
elink_set_aer_mmd(params, &params->phy[ELINK_INT_PHY]);
- PMD_DRV_LOG(DEBUG, "port %x, XGXS?%x, int_status 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "port %x, XGXS?%x, int_status 0x%x",
port, (vars->phy_flags & PHY_XGXS_FLAG),
REG_RD(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4));
is_mi_int = (uint8_t) (REG_RD(sc, NIG_REG_EMAC0_STATUS_MISC_MI_INT +
port * 0x18) > 0);
- PMD_DRV_LOG(DEBUG, "int_mask 0x%x MI_INT %x, SERDES_LINK %x",
+ PMD_DRV_LOG(DEBUG, sc, "int_mask 0x%x MI_INT %x, SERDES_LINK %x",
REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4),
is_mi_int,
REG_RD(sc,
NIG_REG_SERDES0_STATUS_LINK_STATUS + port * 0x3c));
- PMD_DRV_LOG(DEBUG, " 10G %x, XGXS_LINK %x",
+ PMD_DRV_LOG(DEBUG, sc, " 10G %x, XGXS_LINK %x",
REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK10G + port * 0x68),
REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK_STATUS + port * 0x68));
@@ -6310,10 +6315,10 @@ elink_status_t elink_link_update(struct elink_params * params,
cur_link_up = phy->read_status(phy, params,
&phy_vars[phy_index]);
if (cur_link_up) {
- PMD_DRV_LOG(DEBUG, "phy in index %d link is up",
+ PMD_DRV_LOG(DEBUG, sc, "phy in index %d link is up",
phy_index);
} else {
- PMD_DRV_LOG(DEBUG, "phy in index %d link is down",
+ PMD_DRV_LOG(DEBUG, sc, "phy in index %d link is down",
phy_index);
continue;
}
@@ -6346,7 +6351,7 @@ elink_status_t elink_link_update(struct elink_params * params,
* to link up by itself (using configuration)
* - DEFAULT should be overriden during initialiazation
*/
- PMD_DRV_LOG(DEBUG, "Invalid link indication"
+ PMD_DRV_LOG(DEBUG, sc, "Invalid link indication"
"mpc=0x%x. DISABLING LINK !!!",
params->multi_phy_config);
ext_phy_link_up = 0;
@@ -6384,7 +6389,7 @@ elink_status_t elink_link_update(struct elink_params * params,
*/
if (active_external_phy == ELINK_EXT_PHY1) {
if (params->phy[ELINK_EXT_PHY2].phy_specific_func) {
- PMD_DRV_LOG(DEBUG, "Disabling TX on EXT_PHY2");
+ PMD_DRV_LOG(DEBUG, sc, "Disabling TX on EXT_PHY2");
params->phy[ELINK_EXT_PHY2].
phy_specific_func(&params->
phy[ELINK_EXT_PHY2],
@@ -6402,7 +6407,7 @@ elink_status_t elink_link_update(struct elink_params * params,
vars->eee_status = phy_vars[active_external_phy].eee_status;
- PMD_DRV_LOG(DEBUG, "Active external phy selected: %x",
+ PMD_DRV_LOG(DEBUG, sc, "Active external phy selected: %x",
active_external_phy);
}
@@ -6416,7 +6421,7 @@ elink_status_t elink_link_update(struct elink_params * params,
break;
}
}
- PMD_DRV_LOG(DEBUG, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x,"
+ PMD_DRV_LOG(DEBUG, sc, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x,"
" ext_phy_line_speed = %d", vars->flow_ctrl,
vars->link_status, ext_phy_line_speed);
/* Upon link speed change set the NIG into drain mode. Comes to
@@ -6427,7 +6432,7 @@ elink_status_t elink_link_update(struct elink_params * params,
if (vars->phy_link_up) {
if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) && ext_phy_link_up &&
(ext_phy_line_speed != vars->line_speed)) {
- PMD_DRV_LOG(DEBUG, "Internal link speed %d is"
+ PMD_DRV_LOG(DEBUG, sc, "Internal link speed %d is"
" different than the external"
" link speed %d", vars->line_speed,
ext_phy_line_speed);
@@ -6453,7 +6458,7 @@ elink_status_t elink_link_update(struct elink_params * params,
* initialize it
*/
if (!(ELINK_SINGLE_MEDIA_DIRECT(params))) {
- PMD_DRV_LOG(DEBUG, "ext_phy_link_up = %d, int_link_up = %d,"
+ PMD_DRV_LOG(DEBUG, sc, "ext_phy_link_up = %d, int_link_up = %d,"
" init_preceding = %d", ext_phy_link_up,
vars->phy_link_up,
params->phy[ELINK_EXT_PHY1].flags &
@@ -6518,7 +6523,7 @@ static void elink_save_spirom_version(struct bnx2x_softc *sc,
__rte_unused uint8_t port,
uint32_t spirom_ver, uint32_t ver_addr)
{
- PMD_DRV_LOG(DEBUG, "FW version 0x%x:0x%x for port %d",
+ PMD_DRV_LOG(DEBUG, sc, "FW version 0x%x:0x%x for port %d",
(uint16_t) (spirom_ver >> 16), (uint16_t) spirom_ver, port);
if (ver_addr)
@@ -6584,7 +6589,7 @@ static void elink_8073_resolve_fc(struct elink_phy *phy,
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7;
elink_pause_resolve(vars, pause_result);
- PMD_DRV_LOG(DEBUG, "Ext PHY CL37 pause result 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Ext PHY CL37 pause result 0x%x",
pause_result);
}
}
@@ -6628,7 +6633,7 @@ static elink_status_t elink_8073_8727_external_rom_boot(struct bnx2x_softc *sc,
do {
count++;
if (count > 300) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"elink_8073_8727_external_rom_boot port %x:"
"Download failed. fw version = 0x%x",
port, fw_ver1);
@@ -6653,7 +6658,7 @@ static elink_status_t elink_8073_8727_external_rom_boot(struct bnx2x_softc *sc,
MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0000);
elink_save_bnx2x_spirom_ver(sc, phy, port);
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"elink_8073_8727_external_rom_boot port %x:"
"Download complete. fw version = 0x%x", port, fw_ver1);
@@ -6714,10 +6719,10 @@ static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc,
* these bits indicate 2.5G or 1G link up).
*/
if (!(val & (1 << 14)) || !(val & (1 << 13))) {
- PMD_DRV_LOG(DEBUG, "XAUI work-around not required");
+ PMD_DRV_LOG(DEBUG, sc, "XAUI work-around not required");
return ELINK_STATUS_OK;
} else if (!(val & (1 << 15))) {
- PMD_DRV_LOG(DEBUG, "bit 15 went off");
+ PMD_DRV_LOG(DEBUG, sc, "bit 15 went off");
/* If bit 15 is 0, then poll Dev1, Reg $C841 until it's
* MSB (bit15) goes to 1 (indicating that the XAUI
* workaround has completed), then continue on with
@@ -6729,7 +6734,7 @@ static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc,
MDIO_PMA_REG_8073_XAUI_WA,
&val);
if (val & (1 << 15)) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"XAUI workaround has completed");
return ELINK_STATUS_OK;
}
@@ -6739,7 +6744,7 @@ static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc,
}
DELAY(1000 * 3);
}
- PMD_DRV_LOG(DEBUG, "Warning: XAUI work-around timeout !!!");
+ PMD_DRV_LOG(DEBUG, sc, "Warning: XAUI work-around timeout !!!");
return ELINK_STATUS_ERROR;
}
@@ -6781,7 +6786,7 @@ static void elink_8073_set_pause_cl37(struct elink_params *params,
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) {
cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
}
- PMD_DRV_LOG(DEBUG, "Ext phy AN advertize cl37 0x%x", cl37_val);
+ PMD_DRV_LOG(DEBUG, sc, "Ext phy AN advertize cl37 0x%x", cl37_val);
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, cl37_val);
@@ -6812,7 +6817,7 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy,
struct bnx2x_softc *sc = params->sc;
uint16_t val = 0, tmp1;
uint8_t gpio_port;
- PMD_DRV_LOG(DEBUG, "Init 8073");
+ PMD_DRV_LOG(DEBUG, sc, "Init 8073");
if (CHIP_IS_E2(sc))
gpio_port = SC_PATH(sc);
@@ -6833,12 +6838,12 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy,
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1);
- PMD_DRV_LOG(DEBUG, "Before rom RX_ALARM(port1): 0x%x", tmp1);
+ PMD_DRV_LOG(DEBUG, sc, "Before rom RX_ALARM(port1): 0x%x", tmp1);
/* Swap polarity if required - Must be done only in non-1G mode */
if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) {
/* Configure the 8073 to swap _P and _N of the KR lines */
- PMD_DRV_LOG(DEBUG, "Swapping polarity for the 8073");
+ PMD_DRV_LOG(DEBUG, sc, "Swapping polarity for the 8073");
/* 10G Rx/Tx and 1G Tx signal polarity swap */
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD,
@@ -6860,11 +6865,11 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy,
MDIO_AN_DEVAD, MDIO_AN_REG_8073_BAM, &val);
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_8073_BAM, val | 1);
- PMD_DRV_LOG(DEBUG, "Enable CL37 BAM on KR");
+ PMD_DRV_LOG(DEBUG, sc, "Enable CL37 BAM on KR");
}
if (params->loopback_mode == ELINK_LOOPBACK_EXT) {
elink_807x_force_10G(sc, phy);
- PMD_DRV_LOG(DEBUG, "Forced speed 10G on 807X");
+ PMD_DRV_LOG(DEBUG, sc, "Forced speed 10G on 807X");
return ELINK_STATUS_OK;
} else {
elink_cl45_write(sc, phy,
@@ -6890,7 +6895,7 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy,
(PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
val |= (1 << 5);
- PMD_DRV_LOG(DEBUG, "807x autoneg val = 0x%x", val);
+ PMD_DRV_LOG(DEBUG, sc, "807x autoneg val = 0x%x", val);
}
elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, val);
@@ -6904,13 +6909,13 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy,
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV,
&phy_ver);
- PMD_DRV_LOG(DEBUG, "Add 2.5G");
+ PMD_DRV_LOG(DEBUG, sc, "Add 2.5G");
if (phy_ver > 0)
tmp1 |= 1;
else
tmp1 &= 0xfffe;
} else {
- PMD_DRV_LOG(DEBUG, "Disable 2.5G");
+ PMD_DRV_LOG(DEBUG, sc, "Disable 2.5G");
tmp1 &= 0xfffe;
}
@@ -6944,7 +6949,7 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy,
/* Restart autoneg */
DELAY(1000 * 500);
elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200);
- PMD_DRV_LOG(DEBUG, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x",
+ PMD_DRV_LOG(DEBUG, sc, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x",
((val & (1 << 5)) > 0), ((val & (1 << 7)) > 0));
return ELINK_STATUS_OK;
}
@@ -6961,12 +6966,12 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy,
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
- PMD_DRV_LOG(DEBUG, "8703 LASI status 0x%x", val1);
+ PMD_DRV_LOG(DEBUG, sc, "8703 LASI status 0x%x", val1);
/* Clear the interrupt LASI status register */
elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2);
elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val1);
- PMD_DRV_LOG(DEBUG, "807x PCS status 0x%x->0x%x", val2, val1);
+ PMD_DRV_LOG(DEBUG, sc, "807x PCS status 0x%x->0x%x", val2, val1);
/* Clear MSG-OUT */
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1);
@@ -6974,16 +6979,16 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy,
/* Check the LASI */
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2);
- PMD_DRV_LOG(DEBUG, "KR 0x9003 0x%x", val2);
+ PMD_DRV_LOG(DEBUG, sc, "KR 0x9003 0x%x", val2);
/* Check the link status */
elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2);
- PMD_DRV_LOG(DEBUG, "KR PCS status 0x%x", val2);
+ PMD_DRV_LOG(DEBUG, sc, "KR PCS status 0x%x", val2);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1);
link_up = ((val1 & 4) == 4);
- PMD_DRV_LOG(DEBUG, "PMA_REG_STATUS=0x%x", val1);
+ PMD_DRV_LOG(DEBUG, sc, "PMA_REG_STATUS=0x%x", val1);
if (link_up && ((phy->req_line_speed != ELINK_SPEED_10000))) {
if (elink_8073_xaui_wa(sc, phy) != 0)
@@ -6997,7 +7002,7 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy,
/* Check the link status on 1.1.2 */
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1);
- PMD_DRV_LOG(DEBUG, "KR PMA status 0x%x->0x%x,"
+ PMD_DRV_LOG(DEBUG, sc, "KR PMA status 0x%x->0x%x,"
"an_link_status=0x%x", val2, val1, an1000_status);
link_up = (((val1 & 4) == 4) || (an1000_status & (1 << 1)));
@@ -7023,21 +7028,21 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy,
if ((link_status & (1 << 2)) && (!(link_status & (1 << 15)))) {
link_up = 1;
vars->line_speed = ELINK_SPEED_10000;
- PMD_DRV_LOG(DEBUG, "port %x: External link up in 10G",
+ PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 10G",
params->port);
} else if ((link_status & (1 << 1)) && (!(link_status & (1 << 14)))) {
link_up = 1;
vars->line_speed = ELINK_SPEED_2500;
- PMD_DRV_LOG(DEBUG, "port %x: External link up in 2.5G",
+ PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 2.5G",
params->port);
} else if ((link_status & (1 << 0)) && (!(link_status & (1 << 13)))) {
link_up = 1;
vars->line_speed = ELINK_SPEED_1000;
- PMD_DRV_LOG(DEBUG, "port %x: External link up in 1G",
+ PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 1G",
params->port);
} else {
link_up = 0;
- PMD_DRV_LOG(DEBUG, "port %x: External link is down",
+ PMD_DRV_LOG(DEBUG, sc, "port %x: External link is down",
params->port);
}
@@ -7052,7 +7057,7 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy,
* when it`s in 10G mode.
*/
if (vars->line_speed == ELINK_SPEED_1000) {
- PMD_DRV_LOG(DEBUG, "Swapping 1G polarity for"
+ PMD_DRV_LOG(DEBUG, sc, "Swapping 1G polarity for"
"the 8073");
val1 |= (1 << 3);
} else
@@ -7091,7 +7096,7 @@ static void elink_8073_link_reset(__rte_unused struct elink_phy *phy,
gpio_port = SC_PATH(sc);
else
gpio_port = params->port;
- PMD_DRV_LOG(DEBUG, "Setting 8073 port %d into low power mode",
+ PMD_DRV_LOG(DEBUG, sc, "Setting 8073 port %d into low power mode",
gpio_port);
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port);
@@ -7106,7 +7111,7 @@ static uint8_t elink_8705_config_init(struct elink_phy *phy,
*vars)
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "init 8705");
+ PMD_DRV_LOG(DEBUG, sc, "init 8705");
/* Restore normal power mode */
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
@@ -7134,21 +7139,21 @@ static uint8_t elink_8705_read_status(struct elink_phy *phy,
uint8_t link_up = 0;
uint16_t val1, rx_sd;
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "read status 8705");
+ PMD_DRV_LOG(DEBUG, sc, "read status 8705");
elink_cl45_read(sc, phy,
MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1);
- PMD_DRV_LOG(DEBUG, "8705 LASI status 0x%x", val1);
+ PMD_DRV_LOG(DEBUG, sc, "8705 LASI status 0x%x", val1);
elink_cl45_read(sc, phy,
MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1);
- PMD_DRV_LOG(DEBUG, "8705 LASI status 0x%x", val1);
+ PMD_DRV_LOG(DEBUG, sc, "8705 LASI status 0x%x", val1);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xc809, &val1);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xc809, &val1);
- PMD_DRV_LOG(DEBUG, "8705 1.c809 val=0x%x", val1);
+ PMD_DRV_LOG(DEBUG, sc, "8705 1.c809 val=0x%x", val1);
link_up = ((rx_sd & 0x1) && (val1 & (1 << 9))
&& ((val1 & (1 << 8)) == 0));
if (link_up) {
@@ -7172,13 +7177,13 @@ static void elink_set_disable_pmd_transmit(struct elink_params *params,
if (pmd_dis) {
if (params->feature_config_flags &
ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED) {
- PMD_DRV_LOG(DEBUG, "Disabling PMD transmitter");
+ PMD_DRV_LOG(DEBUG, sc, "Disabling PMD transmitter");
} else {
- PMD_DRV_LOG(DEBUG, "NOT disabling PMD transmitter");
+ PMD_DRV_LOG(DEBUG, sc, "NOT disabling PMD transmitter");
return;
}
} else {
- PMD_DRV_LOG(DEBUG, "Enabling PMD transmitter");
+ PMD_DRV_LOG(DEBUG, sc, "Enabling PMD transmitter");
}
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_TX_DISABLE, pmd_dis);
@@ -7212,7 +7217,7 @@ static void elink_sfp_e1e2_set_transmitter(struct elink_params *params,
offsetof(struct shmem_region,
dev_info.port_hw_config[port].sfp_ctrl)) &
PORT_HW_CFG_TX_LASER_MASK;
- PMD_DRV_LOG(DEBUG, "Setting transmitter tx_en=%x for port %x "
+ PMD_DRV_LOG(DEBUG, sc, "Setting transmitter tx_en=%x for port %x "
"mode = %x", tx_en, port, tx_en_mode);
switch (tx_en_mode) {
case PORT_HW_CFG_TX_LASER_MDIO:
@@ -7248,7 +7253,8 @@ static void elink_sfp_e1e2_set_transmitter(struct elink_params *params,
break;
}
default:
- PMD_DRV_LOG(DEBUG, "Invalid TX_LASER_MDIO 0x%x", tx_en_mode);
+ PMD_DRV_LOG(DEBUG, sc,
+ "Invalid TX_LASER_MDIO 0x%x", tx_en_mode);
break;
}
}
@@ -7257,7 +7263,7 @@ static void elink_sfp_set_transmitter(struct elink_params *params,
struct elink_phy *phy, uint8_t tx_en)
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "Setting SFP+ transmitter to %d", tx_en);
+ PMD_DRV_LOG(DEBUG, sc, "Setting SFP+ transmitter to %d", tx_en);
if (CHIP_IS_E3(sc))
elink_sfp_e3_set_transmitter(params, phy, tx_en);
else
@@ -7278,7 +7284,7 @@ static elink_status_t elink_8726_read_sfp_module_eeprom(struct elink_phy *phy,
uint16_t val = 0;
uint16_t i;
if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) {
- PMD_DRV_LOG(DEBUG, "Reading from eeprom is limited to 0xf");
+ PMD_DRV_LOG(DEBUG, sc, "Reading from eeprom is limited to 0xf");
return ELINK_STATUS_ERROR;
}
/* Set the read command byte count */
@@ -7309,7 +7315,7 @@ static elink_status_t elink_8726_read_sfp_module_eeprom(struct elink_phy *phy,
if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) !=
MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Got bad status 0x%x when reading from SFP+ EEPROM",
(val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK));
return ELINK_STATUS_ERROR;
@@ -7350,7 +7356,7 @@ static void elink_warpcore_power_module(struct elink_params *params,
if (pin_cfg == PIN_CFG_NA)
return;
- PMD_DRV_LOG(DEBUG, "Setting SFP+ module power to %d using pin cfg %d",
+ PMD_DRV_LOG(DEBUG, sc, "Setting SFP+ module power to %d using pin cfg %d",
power, pin_cfg);
/* Low ==> corresponding SFP+ module is powered
* high ==> the SFP+ module is powered down
@@ -7375,7 +7381,7 @@ static elink_status_t elink_warpcore_read_sfp_module_eeprom(__rte_unused struct
struct bnx2x_softc *sc = params->sc;
if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Reading from eeprom is limited to 16 bytes");
return ELINK_STATUS_ERROR;
}
@@ -7417,7 +7423,7 @@ static elink_status_t elink_8727_read_sfp_module_eeprom(struct elink_phy *phy,
uint16_t val, i;
if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) {
- PMD_DRV_LOG(DEBUG, "Reading from eeprom is limited to 0xf");
+ PMD_DRV_LOG(DEBUG, sc, "Reading from eeprom is limited to 0xf");
return ELINK_STATUS_ERROR;
}
@@ -7471,7 +7477,7 @@ static elink_status_t elink_8727_read_sfp_module_eeprom(struct elink_phy *phy,
if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) !=
MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Got bad status 0x%x when reading from SFP+ EEPROM",
(val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK));
return ELINK_STATUS_TIMEOUT;
@@ -7512,7 +7518,8 @@ static elink_status_t elink_read_sfp_module_eeprom(struct elink_phy *phy,
read_sfp_module_eeprom_func_p read_func;
if ((dev_addr != 0xa0) && (dev_addr != 0xa2)) {
- PMD_DRV_LOG(DEBUG, "invalid dev_addr 0x%x", dev_addr);
+ PMD_DRV_LOG(DEBUG, params->sc,
+ "invalid dev_addr 0x%x", dev_addr);
return ELINK_STATUS_ERROR;
}
@@ -7558,7 +7565,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
ELINK_I2C_DEV_ADDR_A0,
ELINK_SFP_EEPROM_CON_TYPE_ADDR,
2, (uint8_t *) val) != 0) {
- PMD_DRV_LOG(DEBUG, "Failed to read from SFP+ module EEPROM");
+ PMD_DRV_LOG(DEBUG, sc, "Failed to read from SFP+ module EEPROM");
return ELINK_STATUS_ERROR;
}
@@ -7577,7 +7584,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
1,
&copper_module_type) !=
0) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Failed to read copper-cable-type"
" from SFP+ EEPROM");
return ELINK_STATUS_ERROR;
@@ -7585,7 +7592,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
if (copper_module_type &
ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Active Copper cable detected");
if (phy->type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
@@ -7595,11 +7602,11 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
} else if (copper_module_type &
ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE)
{
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Passive Copper cable detected");
*edc_mode = ELINK_EDC_MODE_PASSIVE_DAC;
} else {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Unknown copper-cable-type 0x%x !!!",
copper_module_type);
return ELINK_STATUS_ERROR;
@@ -7612,7 +7619,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
if ((val[1] & (ELINK_SFP_EEPROM_COMP_CODE_SR_MASK |
ELINK_SFP_EEPROM_COMP_CODE_LR_MASK |
ELINK_SFP_EEPROM_COMP_CODE_LRM_MASK)) == 0) {
- PMD_DRV_LOG(DEBUG, "1G SFP module detected");
+ PMD_DRV_LOG(DEBUG, sc, "1G SFP module detected");
gport = params->port;
phy->media_type = ELINK_ETH_PHY_SFP_1G_FIBER;
if (phy->req_line_speed != ELINK_SPEED_1000) {
@@ -7628,7 +7635,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
}
} else {
int idx, cfg_idx = 0;
- PMD_DRV_LOG(DEBUG, "10G Optic module detected");
+ PMD_DRV_LOG(DEBUG, sc, "10G Optic module detected");
for (idx = ELINK_INT_PHY; idx < ELINK_MAX_PHYS; idx++) {
if (params->phy[idx].type == phy->type) {
cfg_idx = ELINK_LINK_CONFIG_IDX(idx);
@@ -7640,7 +7647,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
}
break;
default:
- PMD_DRV_LOG(DEBUG, "Unable to determine module type 0x%x !!!",
+ PMD_DRV_LOG(DEBUG, sc, "Unable to determine module type 0x%x !!!",
val[0]);
return ELINK_STATUS_ERROR;
}
@@ -7670,7 +7677,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
ELINK_SFP_EEPROM_OPTIONS_ADDR,
ELINK_SFP_EEPROM_OPTIONS_SIZE,
options) != 0) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Failed to read Option field from module EEPROM");
return ELINK_STATUS_ERROR;
}
@@ -7679,7 +7686,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy,
else
*edc_mode = ELINK_EDC_MODE_LIMITING;
}
- PMD_DRV_LOG(DEBUG, "EDC mode is set to 0x%x", *edc_mode);
+ PMD_DRV_LOG(DEBUG, sc, "EDC mode is set to 0x%x", *edc_mode);
return ELINK_STATUS_OK;
}
@@ -7701,7 +7708,7 @@ static elink_status_t elink_verify_sfp_module(struct elink_phy *phy,
config));
if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT) {
- PMD_DRV_LOG(DEBUG, "NOT enforcing module verification");
+ PMD_DRV_LOG(DEBUG, sc, "NOT enforcing module verification");
return ELINK_STATUS_OK;
}
@@ -7713,21 +7720,21 @@ static elink_status_t elink_verify_sfp_module(struct elink_phy *phy,
ELINK_FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) {
/* Use first phy request only in case of non-dual media */
if (ELINK_DUAL_MEDIA(params)) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"FW does not support OPT MDL verification");
return ELINK_STATUS_ERROR;
}
cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL;
} else {
/* No support in OPT MDL detection */
- PMD_DRV_LOG(DEBUG, "FW does not support OPT MDL verification");
+ PMD_DRV_LOG(DEBUG, sc, "FW does not support OPT MDL verification");
return ELINK_STATUS_ERROR;
}
fw_cmd_param = ELINK_FW_PARAM_SET(phy->addr, phy->type, phy->mdio_ctrl);
fw_resp = elink_cb_fw_command(sc, cmd, fw_cmd_param);
if (fw_resp == FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS) {
- PMD_DRV_LOG(DEBUG, "Approved module");
+ PMD_DRV_LOG(DEBUG, sc, "Approved module");
return ELINK_STATUS_OK;
}
@@ -7783,7 +7790,7 @@ static elink_status_t elink_wait_for_sfp_module_initialized(struct elink_phy
ELINK_I2C_DEV_ADDR_A0,
1, 1, &val);
if (rc == 0) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, params->sc,
"SFP+ module initialization took %d ms",
timeout * 5);
return ELINK_STATUS_OK;
@@ -7834,17 +7841,18 @@ static elink_status_t elink_8726_set_limiting_mode(struct bnx2x_softc *sc,
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_ROM_VER2, &cur_limiting_mode);
- PMD_DRV_LOG(DEBUG, "Current Limiting mode is 0x%x", cur_limiting_mode);
+ PMD_DRV_LOG(DEBUG, sc,
+ "Current Limiting mode is 0x%x", cur_limiting_mode);
if (edc_mode == ELINK_EDC_MODE_LIMITING) {
- PMD_DRV_LOG(DEBUG, "Setting LIMITING MODE");
+ PMD_DRV_LOG(DEBUG, sc, "Setting LIMITING MODE");
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_ROM_VER2,
ELINK_EDC_MODE_LIMITING);
} else { /* LRM mode ( default ) */
- PMD_DRV_LOG(DEBUG, "Setting LRM MODE");
+ PMD_DRV_LOG(DEBUG, sc, "Setting LRM MODE");
/* Changing to LRM mode takes quite few seconds. So do it only
* if current mode is limiting (default is LRM)
@@ -7934,7 +7942,7 @@ static void elink_8727_specific_func(struct elink_phy *phy,
val);
break;
default:
- PMD_DRV_LOG(DEBUG, "Function 0x%x not supported by 8727",
+ PMD_DRV_LOG(DEBUG, sc, "Function 0x%x not supported by 8727",
action);
return;
}
@@ -7962,14 +7970,14 @@ static void elink_set_e1e2_module_fault_led(struct elink_params *params,
uint8_t gpio_port = elink_get_gpio_port(params);
uint16_t gpio_pin = fault_led_gpio -
PORT_HW_CFG_FAULT_MODULE_LED_GPIO0;
- PMD_DRV_LOG(DEBUG, "Set fault module-detected led "
+ PMD_DRV_LOG(DEBUG, sc, "Set fault module-detected led "
"pin %x port %x mode %x",
gpio_pin, gpio_port, gpio_mode);
elink_cb_gpio_write(sc, gpio_pin, gpio_mode, gpio_port);
}
break;
default:
- PMD_DRV_LOG(DEBUG, "Error: Invalid fault led mode 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Error: Invalid fault led mode 0x%x",
fault_led_gpio);
}
}
@@ -7985,7 +7993,7 @@ static void elink_set_e3_module_fault_led(struct elink_params *params,
dev_info.port_hw_config[port].e3_sfp_ctrl)) &
PORT_HW_CFG_E3_FAULT_MDL_LED_MASK) >>
PORT_HW_CFG_E3_FAULT_MDL_LED_SHIFT;
- PMD_DRV_LOG(DEBUG, "Setting Fault LED to %d using pin cfg %d",
+ PMD_DRV_LOG(DEBUG, sc, "Setting Fault LED to %d using pin cfg %d",
gpio_mode, pin_cfg);
elink_set_cfg_pin(sc, pin_cfg, gpio_mode);
}
@@ -7994,7 +8002,8 @@ static void elink_set_sfp_module_fault_led(struct elink_params *params,
uint8_t gpio_mode)
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "Setting SFP+ module fault LED to %d", gpio_mode);
+ PMD_DRV_LOG(DEBUG, sc,
+ "Setting SFP+ module fault LED to %d", gpio_mode);
if (CHIP_IS_E3(sc)) {
/* Low ==> if SFP+ module is supported otherwise
* High ==> if SFP+ module is not on the approved vendor list
@@ -8021,7 +8030,7 @@ static void elink_warpcore_hw_reset(__rte_unused struct elink_phy *phy,
static void elink_power_sfp_module(struct elink_params *params,
struct elink_phy *phy, uint8_t power)
{
- PMD_DRV_LOG(DEBUG, "Setting SFP+ power to %x", power);
+ PMD_DRV_LOG(DEBUG, params->sc, "Setting SFP+ power to %x", power);
switch (phy->type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727:
@@ -8107,16 +8116,16 @@ static elink_status_t elink_sfp_module_detection(struct elink_phy *phy,
config));
/* Enabled transmitter by default */
elink_sfp_set_transmitter(params, phy, 1);
- PMD_DRV_LOG(DEBUG, "SFP+ module plugged in/out detected on port %d",
+ PMD_DRV_LOG(DEBUG, sc, "SFP+ module plugged in/out detected on port %d",
params->port);
/* Power up module */
elink_power_sfp_module(params, phy, 1);
if (elink_get_edc_mode(phy, params, &edc_mode) != 0) {
- PMD_DRV_LOG(DEBUG, "Failed to get valid module type");
+ PMD_DRV_LOG(DEBUG, sc, "Failed to get valid module type");
return ELINK_STATUS_ERROR;
} else if (elink_verify_sfp_module(phy, params) != 0) {
/* Check SFP+ module compatibility */
- PMD_DRV_LOG(DEBUG, "Module verification failed!!");
+ PMD_DRV_LOG(DEBUG, sc, "Module verification failed!!");
rc = ELINK_STATUS_ERROR;
/* Turn on fault module-detected led */
elink_set_sfp_module_fault_led(params,
@@ -8125,7 +8134,7 @@ static elink_status_t elink_sfp_module_detection(struct elink_phy *phy,
/* Check if need to power down the SFP+ module */
if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN) {
- PMD_DRV_LOG(DEBUG, "Shutdown SFP+ module!!");
+ PMD_DRV_LOG(DEBUG, sc, "Shutdown SFP+ module!!");
elink_power_sfp_module(params, phy, 0);
return rc;
}
@@ -8166,7 +8175,7 @@ void elink_handle_module_detect_int(struct elink_params *params)
if (elink_get_mod_abs_int_cfg(sc, params->shmem_base,
params->port, &gpio_num, &gpio_port) ==
ELINK_STATUS_ERROR) {
- PMD_DRV_LOG(DEBUG, "Failed to get MOD_ABS interrupt config");
+ PMD_DRV_LOG(DEBUG, sc, "Failed to get MOD_ABS interrupt config");
return;
}
@@ -8206,7 +8215,7 @@ void elink_handle_module_detect_int(struct elink_params *params)
}
}
} else {
- PMD_DRV_LOG(DEBUG, "SFP+ module is not initialized");
+ PMD_DRV_LOG(DEBUG, sc, "SFP+ module is not initialized");
}
} else {
elink_cb_gpio_int_write(sc, gpio_num,
@@ -8251,7 +8260,7 @@ static uint8_t elink_8706_8726_read_status(struct elink_phy *phy,
uint8_t link_up = 0;
uint16_t val1, val2, rx_sd, pcs_status;
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "XGXS 8706/8726");
+ PMD_DRV_LOG(DEBUG, sc, "XGXS 8706/8726");
/* Clear RX Alarm */
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2);
@@ -8261,7 +8270,8 @@ static uint8_t elink_8706_8726_read_status(struct elink_phy *phy,
/* Clear LASI indication */
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2);
- PMD_DRV_LOG(DEBUG, "8706/8726 LASI status 0x%x--> 0x%x", val1, val2);
+ PMD_DRV_LOG(DEBUG, sc,
+ "8706/8726 LASI status 0x%x--> 0x%x", val1, val2);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd);
elink_cl45_read(sc, phy,
@@ -8269,7 +8279,7 @@ static uint8_t elink_8706_8726_read_status(struct elink_phy *phy,
elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2);
elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2);
- PMD_DRV_LOG(DEBUG, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps"
+ PMD_DRV_LOG(DEBUG, sc, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps"
" link_status 0x%x", rx_sd, pcs_status, val2);
/* Link is up if both bit 0 of pmd_rx_sd and bit 0 of pcs_status
* are set, or if the autoneg bit 1 is set
@@ -8323,7 +8333,7 @@ static uint8_t elink_8706_config_init(struct elink_phy *phy,
break;
DELAY(1000 * 10);
}
- PMD_DRV_LOG(DEBUG, "XGXS 8706 is initialized after %d ms", cnt);
+ PMD_DRV_LOG(DEBUG, sc, "XGXS 8706 is initialized after %d ms", cnt);
if ((params->feature_config_flags &
ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
uint8_t i;
@@ -8337,14 +8347,14 @@ static uint8_t elink_8706_config_init(struct elink_phy *phy,
val &= ~0x7;
/* Set control bits according to configuration */
val |= (phy->rx_preemphasis[i] & 0x7);
- PMD_DRV_LOG(DEBUG, "Setting RX Equalizer to BNX2X8706"
+ PMD_DRV_LOG(DEBUG, sc, "Setting RX Equalizer to BNX2X8706"
" reg 0x%x <-- val 0x%x", reg, val);
elink_cl45_write(sc, phy, MDIO_XS_DEVAD, reg, val);
}
}
/* Force speed */
if (phy->req_line_speed == ELINK_SPEED_10000) {
- PMD_DRV_LOG(DEBUG, "XGXS 8706 force 10Gbps");
+ PMD_DRV_LOG(DEBUG, sc, "XGXS 8706 force 10Gbps");
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
@@ -8358,7 +8368,7 @@ static uint8_t elink_8706_config_init(struct elink_phy *phy,
/* Force 1Gbps using autoneg with 1G advertisement */
/* Allow CL37 through CL73 */
- PMD_DRV_LOG(DEBUG, "XGXS 8706 AutoNeg");
+ PMD_DRV_LOG(DEBUG, sc, "XGXS 8706 AutoNeg");
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c);
@@ -8393,7 +8403,7 @@ static uint8_t elink_8706_config_init(struct elink_phy *phy,
& PORT_HW_CFG_TX_LASER_MASK;
if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) {
- PMD_DRV_LOG(DEBUG, "Enabling TXONOFF_PWRDN_DIS");
+ PMD_DRV_LOG(DEBUG, sc, "Enabling TXONOFF_PWRDN_DIS");
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL,
&tmp1);
@@ -8420,7 +8430,7 @@ static void elink_8726_config_loopback(struct elink_phy *phy,
struct elink_params *params)
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "PMA/PMD ext_phy_loopback: 8726");
+ PMD_DRV_LOG(DEBUG, sc, "PMA/PMD ext_phy_loopback: 8726");
elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0001);
}
@@ -8472,7 +8482,7 @@ static uint8_t elink_8726_read_status(struct elink_phy *phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER,
&val1);
if (val1 & (1 << 15)) {
- PMD_DRV_LOG(DEBUG, "Tx is disabled");
+ PMD_DRV_LOG(DEBUG, sc, "Tx is disabled");
link_up = 0;
vars->line_speed = 0;
}
@@ -8485,7 +8495,7 @@ static uint8_t elink_8726_config_init(struct elink_phy *phy,
struct elink_vars *vars)
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "Initializing BNX2X8726");
+ PMD_DRV_LOG(DEBUG, sc, "Initializing BNX2X8726");
elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15);
elink_wait_reset_complete(sc, phy, params);
@@ -8500,7 +8510,7 @@ static uint8_t elink_8726_config_init(struct elink_phy *phy,
elink_sfp_module_detection(phy, params);
if (phy->req_line_speed == ELINK_SPEED_1000) {
- PMD_DRV_LOG(DEBUG, "Setting 1G force");
+ PMD_DRV_LOG(DEBUG, sc, "Setting 1G force");
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40);
elink_cl45_write(sc, phy,
@@ -8515,7 +8525,7 @@ static uint8_t elink_8726_config_init(struct elink_phy *phy,
((phy->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) !=
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
- PMD_DRV_LOG(DEBUG, "Setting 1G clause37");
+ PMD_DRV_LOG(DEBUG, sc, "Setting 1G clause37");
/* Set Flow control */
elink_ext_phy_set_pause(params, phy, vars);
elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, 0x20);
@@ -8543,7 +8553,7 @@ static uint8_t elink_8726_config_init(struct elink_phy *phy,
/* Set TX PreEmphasis if needed */
if ((params->feature_config_flags &
ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x",
phy->tx_preemphasis[0], phy->tx_preemphasis[1]);
elink_cl45_write(sc, phy,
@@ -8565,7 +8575,7 @@ static void elink_8726_link_reset(struct elink_phy *phy,
struct elink_params *params)
{
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "elink_8726_link_reset port %d", params->port);
+ PMD_DRV_LOG(DEBUG, sc, "elink_8726_link_reset port %d", params->port);
/* Set serial boot control for external load */
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001);
@@ -8638,14 +8648,14 @@ static void elink_8727_config_speed(struct elink_phy *phy,
/* Set option 1G speed */
if ((phy->req_line_speed == ELINK_SPEED_1000) ||
(phy->media_type == ELINK_ETH_PHY_SFP_1G_FIBER)) {
- PMD_DRV_LOG(DEBUG, "Setting 1G force");
+ PMD_DRV_LOG(DEBUG, sc, "Setting 1G force");
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD);
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, &tmp1);
- PMD_DRV_LOG(DEBUG, "1.7 = 0x%x", tmp1);
+ PMD_DRV_LOG(DEBUG, sc, "1.7 = 0x%x", tmp1);
/* Power down the XAUI until link is up in case of dual-media
* and 1G
*/
@@ -8665,7 +8675,7 @@ static void elink_8727_config_speed(struct elink_phy *phy,
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) !=
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
- PMD_DRV_LOG(DEBUG, "Setting 1G clause37");
+ PMD_DRV_LOG(DEBUG, sc, "Setting 1G clause37");
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL, 0);
elink_cl45_write(sc, phy,
@@ -8699,7 +8709,7 @@ static uint8_t elink_8727_config_init(struct elink_phy *phy,
elink_wait_reset_complete(sc, phy, params);
- PMD_DRV_LOG(DEBUG, "Initializing BNX2X8727");
+ PMD_DRV_LOG(DEBUG, sc, "Initializing BNX2X8727");
elink_8727_specific_func(phy, params, ELINK_PHY_INIT);
/* Initially configure MOD_ABS to interrupt when module is
@@ -8732,7 +8742,7 @@ static uint8_t elink_8727_config_init(struct elink_phy *phy,
/* Set TX PreEmphasis if needed */
if ((params->feature_config_flags &
ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
- PMD_DRV_LOG(DEBUG, "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x",
phy->tx_preemphasis[0], phy->tx_preemphasis[1]);
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_TX_CTRL1,
@@ -8754,7 +8764,7 @@ static uint8_t elink_8727_config_init(struct elink_phy *phy,
if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) {
- PMD_DRV_LOG(DEBUG, "Enabling TXONOFF_PWRDN_DIS");
+ PMD_DRV_LOG(DEBUG, sc, "Enabling TXONOFF_PWRDN_DIS");
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG,
&tmp2);
@@ -8786,7 +8796,7 @@ static void elink_8727_handle_mod_abs(struct elink_phy *phy,
if (mod_abs & (1 << 8)) {
/* Module is absent */
- PMD_DRV_LOG(DEBUG, "MOD_ABS indication show module is absent");
+ PMD_DRV_LOG(DEBUG, sc, "MOD_ABS indication show module is absent");
phy->media_type = ELINK_ETH_PHY_NOT_PRESENT;
/* 1. Set mod_abs to detect next module
* presence event
@@ -8811,7 +8821,7 @@ static void elink_8727_handle_mod_abs(struct elink_phy *phy,
} else {
/* Module is present */
- PMD_DRV_LOG(DEBUG, "MOD_ABS indication show module is present");
+ PMD_DRV_LOG(DEBUG, sc, "MOD_ABS indication show module is present");
/* First disable transmitter, and if the module is ok, the
* module_detection will enable it
* 1. Set mod_abs to detect next module absent event ( bit 8)
@@ -8842,14 +8852,14 @@ static void elink_8727_handle_mod_abs(struct elink_phy *phy,
if (elink_wait_for_sfp_module_initialized(phy, params) == 0) {
elink_sfp_module_detection(phy, params);
} else {
- PMD_DRV_LOG(DEBUG, "SFP+ module is not initialized");
+ PMD_DRV_LOG(DEBUG, sc, "SFP+ module is not initialized");
}
/* Reconfigure link speed based on module type limitations */
elink_8727_config_speed(phy, params);
}
- PMD_DRV_LOG(DEBUG, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status);
+ PMD_DRV_LOG(DEBUG, sc, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status);
/* No need to check link status in case of module plugged in/out */
}
@@ -8872,14 +8882,14 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy,
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &rx_alarm_status);
vars->line_speed = 0;
- PMD_DRV_LOG(DEBUG, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status);
+ PMD_DRV_LOG(DEBUG, sc, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status);
elink_sfp_mask_fault(sc, phy, MDIO_PMA_LASI_TXSTAT,
MDIO_PMA_LASI_TXCTRL);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
- PMD_DRV_LOG(DEBUG, "8727 LASI status 0x%x", val1);
+ PMD_DRV_LOG(DEBUG, sc, "8727 LASI status 0x%x", val1);
/* Clear MSG-OUT */
elink_cl45_read(sc, phy,
@@ -8897,7 +8907,7 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy,
if ((val1 & (1 << 8)) == 0) {
if (!CHIP_IS_E1x(sc))
oc_port = SC_PATH(sc) + (params->port << 1);
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"8727 Power fault has been detected on port %d",
oc_port);
elink_cb_event_log(sc, ELINK_LOG_ID_OVER_CURRENT, oc_port); //"Error: Power fault on Port %d has "
@@ -8940,10 +8950,10 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy,
}
if (!(phy->flags & ELINK_FLAGS_SFP_NOT_APPROVED)) {
- PMD_DRV_LOG(DEBUG, "Enabling 8727 TX laser");
+ PMD_DRV_LOG(DEBUG, sc, "Enabling 8727 TX laser");
elink_sfp_set_transmitter(params, phy, 1);
} else {
- PMD_DRV_LOG(DEBUG, "Tx is disabled");
+ PMD_DRV_LOG(DEBUG, sc, "Tx is disabled");
return 0;
}
@@ -8957,16 +8967,16 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy,
if ((link_status & (1 << 2)) && (!(link_status & (1 << 15)))) {
link_up = 1;
vars->line_speed = ELINK_SPEED_10000;
- PMD_DRV_LOG(DEBUG, "port %x: External link up in 10G",
+ PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 10G",
params->port);
} else if ((link_status & (1 << 0)) && (!(link_status & (1 << 13)))) {
link_up = 1;
vars->line_speed = ELINK_SPEED_1000;
- PMD_DRV_LOG(DEBUG, "port %x: External link up in 1G",
+ PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 1G",
params->port);
} else {
link_up = 0;
- PMD_DRV_LOG(DEBUG, "port %x: External link is down",
+ PMD_DRV_LOG(DEBUG, sc, "port %x: External link is down",
params->port);
}
@@ -8986,7 +8996,7 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy,
if (link_up) {
elink_ext_phy_resolve_fc(phy, params, vars);
vars->duplex = DUPLEX_FULL;
- PMD_DRV_LOG(DEBUG, "duplex = 0x%x", vars->duplex);
+ PMD_DRV_LOG(DEBUG, sc, "duplex = 0x%x", vars->duplex);
}
if ((ELINK_DUAL_MEDIA(params)) &&
@@ -9058,7 +9068,7 @@ static void elink_save_848xx_spirom_version(struct elink_phy *phy,
DELAY(5);
}
if (cnt == 100) {
- PMD_DRV_LOG(DEBUG, "Unable to read 848xx "
+ PMD_DRV_LOG(DEBUG, sc, "Unable to read 848xx "
"phy fw version(1)");
elink_save_spirom_version(sc, port, 0, phy->ver_addr);
return;
@@ -9075,7 +9085,7 @@ static void elink_save_848xx_spirom_version(struct elink_phy *phy,
DELAY(5);
}
if (cnt == 100) {
- PMD_DRV_LOG(DEBUG, "Unable to read 848xx phy fw "
+ PMD_DRV_LOG(DEBUG, sc, "Unable to read 848xx phy fw "
"version(2)");
elink_save_spirom_version(sc, port, 0, phy->ver_addr);
return;
@@ -9188,7 +9198,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
autoneg_val |= (1 << 9 | 1 << 12);
if (phy->req_duplex == DUPLEX_FULL)
an_1000_val |= (1 << 9);
- PMD_DRV_LOG(DEBUG, "Advertising 1G");
+ PMD_DRV_LOG(DEBUG, sc, "Advertising 1G");
} else
an_1000_val &= ~((1 << 8) | (1 << 9));
@@ -9204,7 +9214,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
*/
autoneg_val |= (1 << 9 | 1 << 12);
an_10_100_val |= (1 << 8);
- PMD_DRV_LOG(DEBUG, "Advertising 100M-FD");
+ PMD_DRV_LOG(DEBUG, sc, "Advertising 100M-FD");
}
if (phy->speed_cap_mask &
@@ -9213,7 +9223,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
*/
autoneg_val |= (1 << 9 | 1 << 12);
an_10_100_val |= (1 << 7);
- PMD_DRV_LOG(DEBUG, "Advertising 100M-HD");
+ PMD_DRV_LOG(DEBUG, sc, "Advertising 100M-HD");
}
if ((phy->speed_cap_mask &
@@ -9221,7 +9231,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
(phy->supported & ELINK_SUPPORTED_10baseT_Full)) {
an_10_100_val |= (1 << 6);
autoneg_val |= (1 << 9 | 1 << 12);
- PMD_DRV_LOG(DEBUG, "Advertising 10M-FD");
+ PMD_DRV_LOG(DEBUG, sc, "Advertising 10M-FD");
}
if ((phy->speed_cap_mask &
@@ -9229,7 +9239,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
(phy->supported & ELINK_SUPPORTED_10baseT_Half)) {
an_10_100_val |= (1 << 5);
autoneg_val |= (1 << 9 | 1 << 12);
- PMD_DRV_LOG(DEBUG, "Advertising 10M-HD");
+ PMD_DRV_LOG(DEBUG, sc, "Advertising 10M-HD");
}
}
@@ -9244,7 +9254,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
(1 << 15 | 1 << 9 | 7 << 0));
/* The PHY needs this set even for forced link. */
an_10_100_val |= (1 << 8) | (1 << 7);
- PMD_DRV_LOG(DEBUG, "Setting 100M force");
+ PMD_DRV_LOG(DEBUG, sc, "Setting 100M force");
}
if ((phy->req_line_speed == ELINK_SPEED_10) &&
(phy->supported &
@@ -9253,7 +9263,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
elink_cl45_write(sc, phy,
MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL,
(1 << 15 | 1 << 9 | 7 << 0));
- PMD_DRV_LOG(DEBUG, "Setting 10M force");
+ PMD_DRV_LOG(DEBUG, sc, "Setting 10M force");
}
elink_cl45_write(sc, phy,
@@ -9277,7 +9287,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy,
(phy->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) ||
(phy->req_line_speed == ELINK_SPEED_10000)) {
- PMD_DRV_LOG(DEBUG, "Advertising 10G");
+ PMD_DRV_LOG(DEBUG, sc, "Advertising 10G");
/* Restart autoneg for 10G */
elink_cl45_read_or_write(sc, phy,
@@ -9333,7 +9343,7 @@ static elink_status_t elink_84833_cmd_hdlr(struct elink_phy *phy,
DELAY(1000 * 1);
}
if (idx >= PHY84833_CMDHDLR_WAIT) {
- PMD_DRV_LOG(DEBUG, "FW cmd: FW not ready.");
+ PMD_DRV_LOG(DEBUG, sc, "FW cmd: FW not ready.");
return ELINK_STATUS_ERROR;
}
@@ -9355,7 +9365,7 @@ static elink_status_t elink_84833_cmd_hdlr(struct elink_phy *phy,
}
if ((idx >= PHY84833_CMDHDLR_WAIT) ||
(val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) {
- PMD_DRV_LOG(DEBUG, "FW cmd failed.");
+ PMD_DRV_LOG(DEBUG, sc, "FW cmd failed.");
return ELINK_STATUS_ERROR;
}
/* Gather returning data */
@@ -9397,7 +9407,7 @@ static elink_status_t elink_84833_pair_swap_cfg(struct elink_phy *phy,
PHY84833_CMD_SET_PAIR_SWAP, data,
PHY84833_CMDHDLR_MAX_ARGS);
if (status == ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "Pairswap OK, val=0x%x", data[1]);
+ PMD_DRV_LOG(DEBUG, sc, "Pairswap OK, val=0x%x", data[1]);
}
return status;
@@ -9473,7 +9483,8 @@ static void elink_84833_hw_reset_phy(struct elink_phy *phy,
elink_cb_gpio_mult_write(sc, reset_gpios,
MISC_REGISTERS_GPIO_OUTPUT_LOW);
DELAY(10);
- PMD_DRV_LOG(DEBUG, "84833 hw reset on pin values 0x%x", reset_gpios);
+ PMD_DRV_LOG(DEBUG, sc,
+ "84833 hw reset on pin values 0x%x", reset_gpios);
}
static elink_status_t elink_8483x_disable_eee(struct elink_phy *phy,
@@ -9483,13 +9494,13 @@ static elink_status_t elink_8483x_disable_eee(struct elink_phy *phy,
elink_status_t rc;
uint16_t cmd_args = 0;
- PMD_DRV_LOG(DEBUG, "Don't Advertise 10GBase-T EEE");
+ PMD_DRV_LOG(DEBUG, params->sc, "Don't Advertise 10GBase-T EEE");
/* Prevent Phy from working in EEE and advertising it */
rc = elink_84833_cmd_hdlr(phy, params,
PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1);
if (rc != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "EEE disable failed.");
+ PMD_DRV_LOG(DEBUG, params->sc, "EEE disable failed.");
return rc;
}
@@ -9506,7 +9517,7 @@ static elink_status_t elink_8483x_enable_eee(struct elink_phy *phy,
rc = elink_84833_cmd_hdlr(phy, params,
PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1);
if (rc != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "EEE enable failed.");
+ PMD_DRV_LOG(DEBUG, params->sc, "EEE enable failed.");
return rc;
}
@@ -9599,7 +9610,7 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy,
elink_cl45_write(sc, phy, MDIO_CTL_DEVAD,
MDIO_CTL_REG_84823_MEDIA, val);
- PMD_DRV_LOG(DEBUG, "Multi_phy config = 0x%x, Media control = 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Multi_phy config = 0x%x, Media control = 0x%x",
params->multi_phy_config, val);
if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) ||
@@ -9615,7 +9626,7 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy,
PHY84833_CMD_SET_EEE_MODE, cmd_args,
PHY84833_CMDHDLR_MAX_ARGS);
if (rc != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "Cfg AutogrEEEn failed.");
+ PMD_DRV_LOG(DEBUG, sc, "Cfg AutogrEEEn failed.");
}
}
if (initialize) {
@@ -9652,7 +9663,7 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy,
elink_eee_has_cap(params)) {
rc = elink_eee_initial_config(params, vars, SHMEM_EEE_10G_ADV);
if (rc != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "Failed to configure EEE timers");
+ PMD_DRV_LOG(DEBUG, sc, "Failed to configure EEE timers");
elink_8483x_disable_eee(phy, params, vars);
return rc;
}
@@ -9665,7 +9676,7 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy,
else
rc = elink_8483x_disable_eee(phy, params, vars);
if (rc != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "Failed to set EEE advertisement");
+ PMD_DRV_LOG(DEBUG, sc, "Failed to set EEE advertisement");
return rc;
}
} else {
@@ -9697,7 +9708,7 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy,
elink_cl45_read(sc, phy, MDIO_AN_DEVAD, 0xFFFA, &val1);
elink_cl45_read(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL, &val2);
- PMD_DRV_LOG(DEBUG, "BNX2X848xx: PMD_SIGNAL 1.a811 = 0x%x", val2);
+ PMD_DRV_LOG(DEBUG, sc, "BNX2X848xx: PMD_SIGNAL 1.a811 = 0x%x", val2);
/* Check link 10G */
if (val2 & (1 << 11)) {
@@ -9719,7 +9730,8 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy,
MDIO_AN_REG_8481_EXPANSION_REG_RD_RW,
&legacy_status);
- PMD_DRV_LOG(DEBUG, "Legacy speed status = 0x%x", legacy_status);
+ PMD_DRV_LOG(DEBUG, sc,
+ "Legacy speed status = 0x%x", legacy_status);
link_up = ((legacy_status & (1 << 11)) == (1 << 11));
legacy_speed = (legacy_status & (3 << 9));
if (legacy_speed == (0 << 9))
@@ -9749,7 +9761,7 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy,
else
vars->duplex = DUPLEX_HALF;
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Link is up in %dMbps, is_duplex_full= %d",
vars->line_speed,
(vars->duplex == DUPLEX_FULL));
@@ -9771,7 +9783,7 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy,
}
}
if (link_up) {
- PMD_DRV_LOG(DEBUG, "BNX2X848x3: link speed is %d",
+ PMD_DRV_LOG(DEBUG, sc, "BNX2X848x3: link speed is %d",
vars->line_speed);
elink_ext_phy_resolve_fc(phy, params, vars);
@@ -9888,7 +9900,7 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
switch (mode) {
case ELINK_LED_MODE_OFF:
- PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE OFF", port);
+ PMD_DRV_LOG(DEBUG, sc, "Port 0x%x: LED MODE OFF", port);
if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
SHARED_HW_CFG_LED_EXTPHY1) {
@@ -9918,7 +9930,8 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
break;
case ELINK_LED_MODE_FRONT_PANEL_OFF:
- PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE FRONT PANEL OFF", port);
+ PMD_DRV_LOG(DEBUG, sc,
+ "Port 0x%x: LED MODE FRONT PANEL OFF", port);
if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
SHARED_HW_CFG_LED_EXTPHY1) {
@@ -9968,7 +9981,7 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
break;
case ELINK_LED_MODE_ON:
- PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE ON", port);
+ PMD_DRV_LOG(DEBUG, sc, "Port 0x%x: LED MODE ON", port);
if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
SHARED_HW_CFG_LED_EXTPHY1) {
@@ -10028,7 +10041,7 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
case ELINK_LED_MODE_OPER:
- PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE OPER", port);
+ PMD_DRV_LOG(DEBUG, sc, "Port 0x%x: LED MODE OPER", port);
if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
SHARED_HW_CFG_LED_EXTPHY1) {
@@ -10043,7 +10056,7 @@ static void elink_848xx_set_link_led(struct elink_phy *phy,
>>
MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT))
{
- PMD_DRV_LOG(DEBUG, "Setting LINK_SIGNAL");
+ PMD_DRV_LOG(DEBUG, sc, "Setting LINK_SIGNAL");
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8481_LINK_SIGNAL,
@@ -10156,7 +10169,7 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
uint16_t autoneg_val, an_1000_val, an_10_100_val, fc_val, temp;
uint32_t cfg_pin;
- PMD_DRV_LOG(DEBUG, "54618SE cfg init");
+ PMD_DRV_LOG(DEBUG, sc, "54618SE cfg init");
DELAY(1000 * 1);
/* This works with E3 only, no need to check the chip
@@ -10229,7 +10242,7 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
autoneg_val |= (1 << 9 | 1 << 12);
if (phy->req_duplex == DUPLEX_FULL)
an_1000_val |= (1 << 9);
- PMD_DRV_LOG(DEBUG, "Advertising 1G");
+ PMD_DRV_LOG(DEBUG, sc, "Advertising 1G");
} else
an_1000_val &= ~((1 << 8) | (1 << 9));
@@ -10242,25 +10255,25 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
an_10_100_val |= (1 << 5);
autoneg_val |= (1 << 9 | 1 << 12);
- PMD_DRV_LOG(DEBUG, "Advertising 10M-HD");
+ PMD_DRV_LOG(DEBUG, sc, "Advertising 10M-HD");
}
if (phy->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) {
an_10_100_val |= (1 << 6);
autoneg_val |= (1 << 9 | 1 << 12);
- PMD_DRV_LOG(DEBUG, "Advertising 10M-FD");
+ PMD_DRV_LOG(DEBUG, sc, "Advertising 10M-FD");
}
if (phy->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) {
an_10_100_val |= (1 << 7);
autoneg_val |= (1 << 9 | 1 << 12);
- PMD_DRV_LOG(DEBUG, "Advertising 100M-HD");
+ PMD_DRV_LOG(DEBUG, sc, "Advertising 100M-HD");
}
if (phy->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) {
an_10_100_val |= (1 << 8);
autoneg_val |= (1 << 9 | 1 << 12);
- PMD_DRV_LOG(DEBUG, "Advertising 100M-FD");
+ PMD_DRV_LOG(DEBUG, sc, "Advertising 100M-FD");
}
}
@@ -10269,12 +10282,12 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
autoneg_val |= (1 << 13);
/* Enabled AUTO-MDIX when autoneg is disabled */
elink_cl22_write(sc, phy, 0x18, (1 << 15 | 1 << 9 | 7 << 0));
- PMD_DRV_LOG(DEBUG, "Setting 100M force");
+ PMD_DRV_LOG(DEBUG, sc, "Setting 100M force");
}
if (phy->req_line_speed == ELINK_SPEED_10) {
/* Enabled AUTO-MDIX when autoneg is disabled */
elink_cl22_write(sc, phy, 0x18, (1 << 15 | 1 << 9 | 7 << 0));
- PMD_DRV_LOG(DEBUG, "Setting 10M force");
+ PMD_DRV_LOG(DEBUG, sc, "Setting 10M force");
}
if ((phy->flags & ELINK_FLAGS_EEE) && elink_eee_has_cap(params)) {
@@ -10289,7 +10302,7 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
rc = elink_eee_initial_config(params, vars, SHMEM_EEE_1G_ADV);
if (rc != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "Failed to configure EEE timers");
+ PMD_DRV_LOG(DEBUG, sc, "Failed to configure EEE timers");
elink_eee_disable(phy, params, vars);
} else if ((params->eee_mode & ELINK_EEE_MODE_ADV_LPI) &&
(phy->req_duplex == DUPLEX_FULL) &&
@@ -10303,7 +10316,7 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
elink_eee_advertise(phy, params, vars,
SHMEM_EEE_1G_ADV);
} else {
- PMD_DRV_LOG(DEBUG, "Don't Advertise 1GBase-T EEE");
+ PMD_DRV_LOG(DEBUG, sc, "Don't Advertise 1GBase-T EEE");
elink_eee_disable(phy, params, vars);
}
} else {
@@ -10315,10 +10328,10 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy,
if (params->feature_config_flags &
ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED) {
temp = 6;
- PMD_DRV_LOG(DEBUG, "Enabling Auto-GrEEEn");
+ PMD_DRV_LOG(DEBUG, sc, "Enabling Auto-GrEEEn");
} else {
temp = 0;
- PMD_DRV_LOG(DEBUG, "Don't Adv. EEE");
+ PMD_DRV_LOG(DEBUG, sc, "Don't Adv. EEE");
}
elink_cl45_write(sc, phy, MDIO_AN_DEVAD,
MDIO_AN_REG_EEE_ADV, temp);
@@ -10346,7 +10359,7 @@ static void elink_5461x_set_link_led(struct elink_phy *phy,
elink_cl22_read(sc, phy, MDIO_REG_GPHY_SHADOW, &temp);
temp &= 0xff00;
- PMD_DRV_LOG(DEBUG, "54618x set link led (mode=%x)", mode);
+ PMD_DRV_LOG(DEBUG, sc, "54618x set link led (mode=%x)", mode);
switch (mode) {
case ELINK_LED_MODE_FRONT_PANEL_OFF:
case ELINK_LED_MODE_OFF:
@@ -10404,7 +10417,7 @@ static uint8_t elink_54618se_read_status(struct elink_phy *phy,
/* Get speed operation status */
elink_cl22_read(sc, phy, MDIO_REG_GPHY_AUX_STATUS, &legacy_status);
- PMD_DRV_LOG(DEBUG, "54618SE read_status: 0x%x", legacy_status);
+ PMD_DRV_LOG(DEBUG, sc, "54618SE read_status: 0x%x", legacy_status);
/* Read status to clear the PHY interrupt. */
elink_cl22_read(sc, phy, MDIO_REG_INTR_STATUS, &val);
@@ -10436,7 +10449,7 @@ static uint8_t elink_54618se_read_status(struct elink_phy *phy,
} else /* Should not happen */
vars->line_speed = 0;
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Link is up in %dMbps, is_duplex_full= %d",
vars->line_speed, (vars->duplex == DUPLEX_FULL));
@@ -10450,7 +10463,7 @@ static uint8_t elink_54618se_read_status(struct elink_phy *phy,
vars->link_status |=
LINK_STATUS_PARALLEL_DETECTION_USED;
- PMD_DRV_LOG(DEBUG, "BNX2X54618SE: link speed is %d",
+ PMD_DRV_LOG(DEBUG, sc, "BNX2X54618SE: link speed is %d",
vars->line_speed);
elink_ext_phy_resolve_fc(phy, params, vars);
@@ -10498,7 +10511,7 @@ static void elink_54618se_config_loopback(struct elink_phy *phy,
uint16_t val;
uint32_t umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
- PMD_DRV_LOG(DEBUG, "2PMA/PMD ext_phy_loopback: 54618se");
+ PMD_DRV_LOG(DEBUG, sc, "2PMA/PMD ext_phy_loopback: 54618se");
/* Enable master/slave manual mmode and set to master */
/* mii write 9 [bits set 11 12] */
@@ -10549,7 +10562,7 @@ static uint8_t elink_7101_config_init(struct elink_phy *phy,
{
uint16_t fw_ver1, fw_ver2, val;
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "Setting the SFX7101 LASI indication");
+ PMD_DRV_LOG(DEBUG, sc, "Setting the SFX7101 LASI indication");
/* Restore normal power mode */
elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2,
@@ -10559,7 +10572,7 @@ static uint8_t elink_7101_config_init(struct elink_phy *phy,
elink_wait_reset_complete(sc, phy, params);
elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x1);
- PMD_DRV_LOG(DEBUG, "Setting the SFX7101 LED to blink on traffic");
+ PMD_DRV_LOG(DEBUG, sc, "Setting the SFX7101 LED to blink on traffic");
elink_cl45_write(sc, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LED_CNTL, (1 << 3));
@@ -10590,10 +10603,10 @@ static uint8_t elink_7101_read_status(struct elink_phy *phy,
uint16_t val1, val2;
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1);
- PMD_DRV_LOG(DEBUG, "10G-base-T LASI status 0x%x->0x%x", val2, val1);
+ PMD_DRV_LOG(DEBUG, sc, "10G-base-T LASI status 0x%x->0x%x", val2, val1);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2);
elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1);
- PMD_DRV_LOG(DEBUG, "10G-base-T PMA status 0x%x->0x%x", val2, val1);
+ PMD_DRV_LOG(DEBUG, sc, "10G-base-T PMA status 0x%x->0x%x", val2, val1);
link_up = ((val1 & 4) == 4);
/* If link is up print the AN outcome of the SFX7101 PHY */
if (link_up) {
@@ -10602,7 +10615,7 @@ static uint8_t elink_7101_read_status(struct elink_phy *phy,
&val2);
vars->line_speed = ELINK_SPEED_10000;
vars->duplex = DUPLEX_FULL;
- PMD_DRV_LOG(DEBUG, "SFX7101 AN status 0x%x->Master=%x",
+ PMD_DRV_LOG(DEBUG, sc, "SFX7101 AN status 0x%x->Master=%x",
val2, (val2 & (1 << 14)));
elink_ext_phy_10G_an_resolve(sc, phy, vars);
elink_ext_phy_resolve_fc(phy, params, vars);
@@ -11209,7 +11222,7 @@ static uint32_t elink_get_ext_phy_config(struct bnx2x_softc *sc,
external_phy_config2));
break;
default:
- PMD_DRV_LOG(DEBUG, "Invalid phy_index %d", phy_index);
+ PMD_DRV_LOG(DEBUG, sc, "Invalid phy_index %d", phy_index);
return ELINK_STATUS_ERROR;
}
@@ -11232,7 +11245,7 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc,
(REG_RD(sc, MISC_REG_CHIP_NUM) << 16) |
((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12);
- PMD_DRV_LOG(DEBUG, ":chip_id = 0x%x", chip_id);
+ PMD_DRV_LOG(DEBUG, sc, ":chip_id = 0x%x", chip_id);
if (USES_WARPCORE(sc)) {
uint32_t serdes_net_if;
phy_addr = REG_RD(sc, MISC_REG_WC0_CTRL_PHY_ADDR);
@@ -11309,7 +11322,7 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc,
phy->flags &= ~ELINK_FLAGS_TX_ERROR_CHECK;
break;
default:
- PMD_DRV_LOG(DEBUG, "Unknown WC interface type 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Unknown WC interface type 0x%x",
serdes_net_if);
break;
}
@@ -11337,7 +11350,7 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc,
*phy = phy_xgxs;
break;
default:
- PMD_DRV_LOG(DEBUG, "Invalid switch_cfg");
+ PMD_DRV_LOG(DEBUG, sc, "Invalid switch_cfg");
return ELINK_STATUS_ERROR;
}
}
@@ -11350,7 +11363,7 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc,
else
phy->def_md_devad = ELINK_DEFAULT_PHY_DEV_ADDR;
- PMD_DRV_LOG(DEBUG, "Internal phy port=%d, addr=0x%x, mdio_ctl=0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Internal phy port=%d, addr=0x%x, mdio_ctl=0x%x",
port, phy->addr, phy->mdio_ctrl);
elink_populate_preemphasis(sc, shmem_base, phy, port, ELINK_INT_PHY);
@@ -11477,9 +11490,9 @@ static elink_status_t elink_populate_ext_phy(struct bnx2x_softc *sc,
ELINK_SUPPORTED_100baseT_Full);
}
- PMD_DRV_LOG(DEBUG, "phy_type 0x%x port %d found in index %d",
+ PMD_DRV_LOG(DEBUG, sc, "phy_type 0x%x port %d found in index %d",
phy_type, port, phy_index);
- PMD_DRV_LOG(DEBUG, " addr=0x%x, mdio_ctl=0x%x",
+ PMD_DRV_LOG(DEBUG, sc, " addr=0x%x, mdio_ctl=0x%x",
phy->addr, phy->mdio_ctrl);
return ELINK_STATUS_OK;
}
@@ -11528,7 +11541,7 @@ static void elink_phy_def_cfg(struct elink_params *params,
speed_capability_mask));
}
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"Default config phy idx %x cfg 0x%x speed_cap_mask 0x%x",
phy_index, link_config, phy->speed_cap_mask);
@@ -11617,7 +11630,7 @@ elink_status_t elink_phy_probe(struct elink_params * params)
struct bnx2x_softc *sc = params->sc;
struct elink_phy *phy;
params->num_phys = 0;
- PMD_DRV_LOG(DEBUG, "Begin phy probe");
+ PMD_DRV_LOG(DEBUG, sc, "Begin phy probe");
phy_config_swapped = params->multi_phy_config &
PORT_HW_CFG_PHY_SWAPPED_ENABLED;
@@ -11630,7 +11643,7 @@ elink_status_t elink_phy_probe(struct elink_params * params)
else if (phy_index == ELINK_EXT_PHY2)
actual_phy_idx = ELINK_EXT_PHY1;
}
- PMD_DRV_LOG(DEBUG, "phy_config_swapped %x, phy_index %x,"
+ PMD_DRV_LOG(DEBUG, sc, "phy_config_swapped %x, phy_index %x,"
" actual_phy_idx %x", phy_config_swapped,
phy_index, actual_phy_idx);
phy = &params->phy[actual_phy_idx];
@@ -11638,7 +11651,7 @@ elink_status_t elink_phy_probe(struct elink_params * params)
params->shmem2_base, params->port,
phy) != ELINK_STATUS_OK) {
params->num_phys = 0;
- PMD_DRV_LOG(DEBUG, "phy probe failed in phy index %d",
+ PMD_DRV_LOG(DEBUG, sc, "phy probe failed in phy index %d",
phy_index);
for (phy_index = ELINK_INT_PHY;
phy_index < ELINK_MAX_PHYS; phy_index++)
@@ -11679,7 +11692,8 @@ elink_status_t elink_phy_probe(struct elink_params * params)
params->num_phys++;
}
- PMD_DRV_LOG(DEBUG, "End phy probe. #phys found %x", params->num_phys);
+ PMD_DRV_LOG(DEBUG, sc,
+ "End phy probe. #phys found %x", params->num_phys);
return ELINK_STATUS_OK;
}
@@ -11849,7 +11863,7 @@ static elink_status_t elink_avoid_link_flap(struct elink_params *params,
for (phy_idx = ELINK_INT_PHY; phy_idx < params->num_phys; phy_idx++) {
struct elink_phy *phy = &params->phy[phy_idx];
if (phy->phy_specific_func) {
- PMD_DRV_LOG(DEBUG, "Calling PHY specific func");
+ PMD_DRV_LOG(DEBUG, sc, "Calling PHY specific func");
phy->phy_specific_func(phy, params, ELINK_PHY_INIT);
}
if ((phy->media_type == ELINK_ETH_PHY_SFPP_10G_FIBER) ||
@@ -11969,12 +11983,13 @@ elink_status_t elink_phy_init(struct elink_params *params,
{
int lfa_status;
struct bnx2x_softc *sc = params->sc;
- PMD_DRV_LOG(DEBUG, "Phy Initialization started");
- PMD_DRV_LOG(DEBUG, "(1) req_speed %d, req_flowctrl %d",
+ PMD_DRV_LOG(DEBUG, sc, "Phy Initialization started");
+ PMD_DRV_LOG(DEBUG, sc, "(1) req_speed %d, req_flowctrl %d",
params->req_line_speed[0], params->req_flow_ctrl[0]);
- PMD_DRV_LOG(DEBUG, "(2) req_speed %d, req_flowctrl %d",
+ PMD_DRV_LOG(DEBUG, sc, "(2) req_speed %d, req_flowctrl %d",
params->req_line_speed[1], params->req_flow_ctrl[1]);
- PMD_DRV_LOG(DEBUG, "req_adv_flow_ctrl 0x%x", params->req_fc_auto_adv);
+ PMD_DRV_LOG(DEBUG, sc,
+ "req_adv_flow_ctrl 0x%x", params->req_fc_auto_adv);
vars->link_status = 0;
vars->phy_link_up = 0;
vars->link_up = 0;
@@ -11991,11 +12006,13 @@ elink_status_t elink_phy_init(struct elink_params *params,
lfa_status = elink_check_lfa(params);
if (lfa_status == 0) {
- PMD_DRV_LOG(DEBUG, "Link Flap Avoidance in progress");
+ PMD_DRV_LOG(DEBUG, sc,
+ "Link Flap Avoidance in progress");
return elink_avoid_link_flap(params, vars);
}
- PMD_DRV_LOG(DEBUG, "Cannot avoid link flap lfa_sta=0x%x", lfa_status);
+ PMD_DRV_LOG(DEBUG, sc,
+ "Cannot avoid link flap lfa_sta=0x%x", lfa_status);
elink_cannot_avoid_link_flap(params, vars, lfa_status);
/* Disable attentions */
@@ -12011,12 +12028,12 @@ elink_status_t elink_phy_init(struct elink_params *params,
vars->link_status |= LINK_STATUS_PFC_ENABLED;
if ((params->num_phys == 0) && !CHIP_REV_IS_SLOW(sc)) {
- PMD_DRV_LOG(DEBUG, "No phy found for initialization !!");
+ PMD_DRV_LOG(DEBUG, sc, "No phy found for initialization !!");
return ELINK_STATUS_ERROR;
}
set_phy_vars(params, vars);
- PMD_DRV_LOG(DEBUG, "Num of phys on board: %d", params->num_phys);
+ PMD_DRV_LOG(DEBUG, sc, "Num of phys on board: %d", params->num_phys);
switch (params->loopback_mode) {
case ELINK_LOOPBACK_BMAC:
@@ -12059,7 +12076,7 @@ static elink_status_t elink_link_reset(struct elink_params *params,
{
struct bnx2x_softc *sc = params->sc;
uint8_t phy_index, port = params->port, clear_latch_ind = 0;
- PMD_DRV_LOG(DEBUG, "Resetting the link of port %d", port);
+ PMD_DRV_LOG(DEBUG, sc, "Resetting the link of port %d", port);
/* Disable attentions */
vars->link_status = 0;
elink_update_mng(params, vars->link_status);
@@ -12237,7 +12254,7 @@ static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc,
if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base,
port_of_path, &phy[port]) !=
ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "populate_phy failed");
+ PMD_DRV_LOG(DEBUG, sc, "populate_phy failed");
return ELINK_STATUS_ERROR;
}
/* Disable attentions */
@@ -12277,7 +12294,7 @@ static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc,
else
port_of_path = 0;
- PMD_DRV_LOG(DEBUG, "Loading spirom for phy address 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Loading spirom for phy address 0x%x",
phy_blk[port]->addr);
if (elink_8073_8727_external_rom_boot(sc, phy_blk[port],
port_of_path))
@@ -12361,7 +12378,7 @@ static elink_status_t elink_8726_common_init_phy(struct bnx2x_softc *sc,
/* Extract the ext phy address for the port */
if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base,
port, &phy) != ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "populate phy failed");
+ PMD_DRV_LOG(DEBUG, sc, "populate phy failed");
return ELINK_STATUS_ERROR;
}
@@ -12481,7 +12498,7 @@ static elink_status_t elink_8727_common_init_phy(struct bnx2x_softc *sc,
if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base,
port_of_path, &phy[port]) !=
ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "populate phy failed");
+ PMD_DRV_LOG(DEBUG, sc, "populate phy failed");
return ELINK_STATUS_ERROR;
}
/* disable attentions */
@@ -12512,7 +12529,7 @@ static elink_status_t elink_8727_common_init_phy(struct bnx2x_softc *sc,
port_of_path = port;
else
port_of_path = 0;
- PMD_DRV_LOG(DEBUG, "Loading spirom for phy address 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Loading spirom for phy address 0x%x",
phy_blk[port]->addr);
if (elink_8073_8727_external_rom_boot(sc, phy_blk[port],
port_of_path))
@@ -12539,7 +12556,8 @@ static elink_status_t elink_84833_common_init_phy(struct bnx2x_softc *sc,
DELAY(10);
elink_cb_gpio_mult_write(sc, reset_gpios,
MISC_REGISTERS_GPIO_OUTPUT_HIGH);
- PMD_DRV_LOG(DEBUG, "84833 reset pulse on pin values 0x%x", reset_gpios);
+ PMD_DRV_LOG(DEBUG, sc,
+ "84833 reset pulse on pin values 0x%x", reset_gpios);
return ELINK_STATUS_OK;
}
@@ -12587,7 +12605,7 @@ static elink_status_t elink_ext_phy_common_init(struct bnx2x_softc *sc,
rc = ELINK_STATUS_ERROR;
break;
default:
- PMD_DRV_LOG(DEBUG,
+ PMD_DRV_LOG(DEBUG, sc,
"ext_phy 0x%x common init not required",
ext_phy_type);
break;
@@ -12613,7 +12631,7 @@ elink_status_t elink_common_init_phy(struct bnx2x_softc * sc,
elink_set_mdio_clk(sc, GRCBASE_EMAC0);
elink_set_mdio_clk(sc, GRCBASE_EMAC1);
- PMD_DRV_LOG(DEBUG, "Begin common phy init");
+ PMD_DRV_LOG(DEBUG, sc, "Begin common phy init");
if (CHIP_IS_E3(sc)) {
/* Enable EPIO */
val = REG_RD(sc, MISC_REG_GEN_PURP_HWG);
@@ -12624,7 +12642,7 @@ elink_status_t elink_common_init_phy(struct bnx2x_softc * sc,
offsetof(struct shmem_region,
port_mb[PORT_0].ext_phy_fw_version));
if (phy_ver) {
- PMD_DRV_LOG(DEBUG, "Not doing common init; phy ver is 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Not doing common init; phy ver is 0x%x",
phy_ver);
return ELINK_STATUS_OK;
}
@@ -12696,15 +12714,15 @@ static uint8_t elink_analyze_link_error(struct elink_params *params,
/* If values differ */
switch (phy_flag) {
case PHY_HALF_OPEN_CONN_FLAG:
- PMD_DRV_LOG(DEBUG, "Analyze Remote Fault");
+ PMD_DRV_LOG(DEBUG, sc, "Analyze Remote Fault");
break;
case PHY_SFP_TX_FAULT_FLAG:
- PMD_DRV_LOG(DEBUG, "Analyze TX Fault");
+ PMD_DRV_LOG(DEBUG, sc, "Analyze TX Fault");
break;
default:
- PMD_DRV_LOG(DEBUG, "Analyze UNKNOWN");
+ PMD_DRV_LOG(DEBUG, sc, "Analyze UNKNOWN");
}
- PMD_DRV_LOG(DEBUG, "Link changed:[%x %x]->%x", vars->link_up,
+ PMD_DRV_LOG(DEBUG, sc, "Link changed:[%x %x]->%x", vars->link_up,
old_status, status);
/* a. Update shmem->link_status accordingly
@@ -12830,7 +12848,7 @@ static void elink_sfp_tx_fault_detection(struct elink_phy *phy,
PORT_HW_CFG_E3_TX_FAULT_SHIFT;
if (elink_get_cfg_pin(sc, cfg_pin, &value)) {
- PMD_DRV_LOG(DEBUG, "Failed to read pin 0x%02x", cfg_pin);
+ PMD_DRV_LOG(DEBUG, sc, "Failed to read pin 0x%02x", cfg_pin);
return;
}
@@ -12852,7 +12870,7 @@ static void elink_sfp_tx_fault_detection(struct elink_phy *phy,
/* If module is unapproved, led should be on regardless */
if (!(phy->flags & ELINK_FLAGS_SFP_NOT_APPROVED)) {
- PMD_DRV_LOG(DEBUG, "Change TX_Fault LED: ->%x",
+ PMD_DRV_LOG(DEBUG, sc, "Change TX_Fault LED: ->%x",
led_mode);
elink_set_e3_module_fault_led(params, led_mode);
}
@@ -12862,7 +12880,7 @@ static void elink_sfp_tx_fault_detection(struct elink_phy *phy,
static void elink_kr2_recovery(struct elink_params *params,
struct elink_vars *vars, struct elink_phy *phy)
{
- PMD_DRV_LOG(DEBUG, "KR2 recovery");
+ PMD_DRV_LOG(DEBUG, params->sc, "KR2 recovery");
elink_warpcore_enable_AN_KR2(phy, params, vars);
elink_warpcore_restart_AN_KR(phy, params);
@@ -12889,7 +12907,7 @@ static void elink_check_kr2_wa(struct elink_params *params,
if (!sigdet) {
if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
elink_kr2_recovery(params, vars, phy);
- PMD_DRV_LOG(DEBUG, "No sigdet");
+ PMD_DRV_LOG(DEBUG, sc, "No sigdet");
}
return;
}
@@ -12907,7 +12925,7 @@ static void elink_check_kr2_wa(struct elink_params *params,
if (base_page == 0) {
if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
elink_kr2_recovery(params, vars, phy);
- PMD_DRV_LOG(DEBUG, "No BP");
+ PMD_DRV_LOG(DEBUG, sc, "No BP");
}
return;
}
@@ -12923,7 +12941,7 @@ static void elink_check_kr2_wa(struct elink_params *params,
/* In case KR2 is already disabled, check if we need to re-enable it */
if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) {
if (!not_kr2_device) {
- PMD_DRV_LOG(DEBUG, "BP=0x%x, NP=0x%x", base_page,
+ PMD_DRV_LOG(DEBUG, sc, "BP=0x%x, NP=0x%x", base_page,
next_page);
elink_kr2_recovery(params, vars, phy);
}
@@ -12932,7 +12950,8 @@ static void elink_check_kr2_wa(struct elink_params *params,
/* KR2 is enabled, but not KR2 device */
if (not_kr2_device) {
/* Disable KR2 on both lanes */
- PMD_DRV_LOG(DEBUG, "BP=0x%x, NP=0x%x", base_page, next_page);
+ PMD_DRV_LOG(DEBUG, sc,
+ "BP=0x%x, NP=0x%x", base_page, next_page);
elink_disable_kr2(params, vars, phy);
/* Restart AN on leading lane */
elink_warpcore_restart_AN_KR(phy, params);
@@ -12949,7 +12968,7 @@ void elink_period_func(struct elink_params *params, struct elink_vars *vars)
elink_set_aer_mmd(params, &params->phy[phy_idx]);
if (elink_check_half_open_conn(params, vars, 1) !=
ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "Fault detection failed");
+ PMD_DRV_LOG(DEBUG, sc, "Fault detection failed");
}
break;
}
@@ -12995,7 +13014,7 @@ uint8_t elink_fan_failure_det_req(struct bnx2x_softc *sc,
if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base,
port, &phy)
!= ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "populate phy failed");
+ PMD_DRV_LOG(DEBUG, sc, "populate phy failed");
return 0;
}
fan_failure_det_req |= (phy.flags &
@@ -13045,7 +13064,7 @@ void elink_init_mod_abs_int(struct bnx2x_softc *sc, struct elink_vars *vars,
if (elink_populate_phy(sc, phy_index, shmem_base,
shmem2_base, port, &phy)
!= ELINK_STATUS_OK) {
- PMD_DRV_LOG(DEBUG, "populate phy failed");
+ PMD_DRV_LOG(DEBUG, sc, "populate phy failed");
return;
}
if (phy.type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726) {
@@ -13075,7 +13094,7 @@ void elink_init_mod_abs_int(struct bnx2x_softc *sc, struct elink_vars *vars,
dev_info.port_hw_config[port].aeu_int_mask);
REG_WR(sc, sync_offset, vars->aeu_int_mask);
- PMD_DRV_LOG(DEBUG, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x",
+ PMD_DRV_LOG(DEBUG, sc, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x",
gpio_num, gpio_port, vars->aeu_int_mask);
if (port == 0)