aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/bnx2x')
-rw-r--r--drivers/net/bnx2x/bnx2x.c14
-rw-r--r--drivers/net/bnx2x/bnx2x_ethdev.c8
-rw-r--r--drivers/net/bnx2x/bnx2x_stats.c10
-rw-r--r--drivers/net/bnx2x/bnx2x_vfpf.h2
-rw-r--r--drivers/net/bnx2x/ecore_hsi.h12
-rw-r--r--drivers/net/bnx2x/ecore_init.h2
-rw-r--r--drivers/net/bnx2x/ecore_sp.c4
-rw-r--r--drivers/net/bnx2x/ecore_sp.h22
-rw-r--r--drivers/net/bnx2x/elink.c16
9 files changed, 45 insertions, 45 deletions
diff --git a/drivers/net/bnx2x/bnx2x.c b/drivers/net/bnx2x/bnx2x.c
index 1a7e1c8e..06733d15 100644
--- a/drivers/net/bnx2x/bnx2x.c
+++ b/drivers/net/bnx2x/bnx2x.c
@@ -120,7 +120,7 @@ static int bnx2x_alloc_mem(struct bnx2x_softc *sc);
static void bnx2x_free_mem(struct bnx2x_softc *sc);
static int bnx2x_alloc_fw_stats_mem(struct bnx2x_softc *sc);
static void bnx2x_free_fw_stats_mem(struct bnx2x_softc *sc);
-static __attribute__ ((noinline))
+static __rte_noinline
int bnx2x_nic_load(struct bnx2x_softc *sc);
static int bnx2x_handle_sp_tq(struct bnx2x_softc *sc);
@@ -887,7 +887,7 @@ storm_memset_eq_prod(struct bnx2x_softc *sc, uint16_t eq_prod, uint16_t pfid)
/*
* Post a slowpath command.
*
- * A slowpath command is used to propogate a configuration change through
+ * A slowpath command is used to propagate a configuration change through
* the controller in a controlled manner, allowing each STORM processor and
* other H/W blocks to phase in the change. The commands sent on the
* slowpath are referred to as ramrods. Depending on the ramrod used the
@@ -1962,7 +1962,7 @@ static void bnx2x_squeeze_objects(struct bnx2x_softc *sc)
}
/* stop the controller */
-__attribute__ ((noinline))
+__rte_noinline
int
bnx2x_nic_unload(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link)
{
@@ -2002,7 +2002,7 @@ bnx2x_nic_unload(struct bnx2x_softc *sc, uint32_t unload_mode, uint8_t keep_link
/*
* Nothing to do during unload if previous bnx2x_nic_load()
- * did not completed succesfully - all resourses are released.
+ * did not completed successfully - all resourses are released.
*/
if ((sc->state == BNX2X_STATE_CLOSED) || (sc->state == BNX2X_STATE_ERROR)) {
return 0;
@@ -3931,7 +3931,7 @@ static void bnx2x_attn_int_deasserted2(struct bnx2x_softc *sc, uint32_t attn)
mask1 = REG_RD(sc, PXP2_REG_PXP2_INT_MASK_1);
val0 = REG_RD(sc, PXP2_REG_PXP2_INT_STS_0);
/*
- * If the olny PXP2_EOP_ERROR_BIT is set in
+ * If the only PXP2_EOP_ERROR_BIT is set in
* STS0 and STS1 - clear it
*
* probably we lose additional attentions between
@@ -5910,7 +5910,7 @@ static void bnx2x_set_234_gates(struct bnx2x_softc *sc, uint8_t close)
(val | HC_CONFIG_0_REG_BLOCK_DISABLE_0));
} else {
-/* Prevent incomming interrupts in IGU */
+/* Prevent incoming interrupts in IGU */
val = REG_RD(sc, IGU_REG_BLOCK_CONFIGURATION);
if (close)
@@ -7124,7 +7124,7 @@ void bnx2x_periodic_callout(struct bnx2x_softc *sc)
}
/* start the controller */
-static __attribute__ ((noinline))
+static __rte_noinline
int bnx2x_nic_load(struct bnx2x_softc *sc)
{
uint32_t val;
diff --git a/drivers/net/bnx2x/bnx2x_ethdev.c b/drivers/net/bnx2x/bnx2x_ethdev.c
index 6d7c002f..6f62a37f 100644
--- a/drivers/net/bnx2x/bnx2x_ethdev.c
+++ b/drivers/net/bnx2x/bnx2x_ethdev.c
@@ -119,7 +119,7 @@ bnx2x_interrupt_action(struct rte_eth_dev *dev)
bnx2x_link_update(dev);
}
-static __rte_unused void
+static void
bnx2x_interrupt_handler(void *param)
{
struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
@@ -439,10 +439,10 @@ bnx2x_dev_xstats_get(struct rte_eth_dev *dev, struct rte_eth_xstat *xstats,
}
static void
-bnx2x_dev_infos_get(struct rte_eth_dev *dev, __rte_unused struct rte_eth_dev_info *dev_info)
+bnx2x_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
{
struct bnx2x_softc *sc = dev->data->dev_private;
- dev_info->pci_dev = RTE_DEV_TO_PCI(dev->device);
+ dev_info->pci_dev = RTE_ETH_DEV_TO_PCI(dev);
dev_info->max_rx_queues = sc->max_rx_queues;
dev_info->max_tx_queues = sc->max_tx_queues;
dev_info->min_rx_bufsize = BNX2X_MIN_RX_BUF_SIZE;
@@ -531,7 +531,7 @@ bnx2x_common_dev_init(struct rte_eth_dev *eth_dev, int is_vf)
PMD_INIT_FUNC_TRACE();
eth_dev->dev_ops = is_vf ? &bnx2xvf_eth_dev_ops : &bnx2x_eth_dev_ops;
- pci_dev = RTE_DEV_TO_PCI(eth_dev->device);
+ pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
rte_eth_copy_pci_info(eth_dev, pci_dev);
diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/bnx2x/bnx2x_stats.c
index c489cbee..6223cfef 100644
--- a/drivers/net/bnx2x/bnx2x_stats.c
+++ b/drivers/net/bnx2x/bnx2x_stats.c
@@ -1371,9 +1371,9 @@ bnx2x_prep_fw_stats_req(struct bnx2x_softc *sc)
cur_query_entry = &sc->fw_stats_req->query[BNX2X_PORT_QUERY_IDX];
cur_query_entry->kind = STATS_TYPE_PORT;
- /* For port query index is a DONT CARE */
+ /* For port query index is a DON'T CARE */
cur_query_entry->index = SC_PORT(sc);
- /* For port query funcID is a DONT CARE */
+ /* For port query funcID is a DON'T CARE */
cur_query_entry->funcID = htole16(SC_FUNC(sc));
cur_query_entry->address.hi = htole32(U64_HI(cur_data_offset));
cur_query_entry->address.lo = htole32(U64_LO(cur_data_offset));
@@ -1385,7 +1385,7 @@ bnx2x_prep_fw_stats_req(struct bnx2x_softc *sc)
cur_query_entry = &sc->fw_stats_req->query[BNX2X_PF_QUERY_IDX];
cur_query_entry->kind = STATS_TYPE_PF;
- /* For PF query index is a DONT CARE */
+ /* For PF query index is a DON'T CARE */
cur_query_entry->index = SC_PORT(sc);
cur_query_entry->funcID = htole16(SC_FUNC(sc));
cur_query_entry->address.hi = htole32(U64_HI(cur_data_offset));
@@ -1450,7 +1450,7 @@ void bnx2x_memset_stats(struct bnx2x_softc *sc)
if (sc->port.pmf && sc->port.port_stx)
bnx2x_port_stats_base_init(sc);
- /* mark the end of statistics initializiation */
+ /* mark the end of statistics initialization */
sc->stats_init = false;
}
@@ -1536,7 +1536,7 @@ bnx2x_stats_init(struct bnx2x_softc *sc)
bnx2x_port_stats_base_init(sc);
}
- /* mark the end of statistics initializiation */
+ /* mark the end of statistics initialization */
sc->stats_init = FALSE;
}
diff --git a/drivers/net/bnx2x/bnx2x_vfpf.h b/drivers/net/bnx2x/bnx2x_vfpf.h
index 955ea982..d7cc11be 100644
--- a/drivers/net/bnx2x/bnx2x_vfpf.h
+++ b/drivers/net/bnx2x/bnx2x_vfpf.h
@@ -282,7 +282,7 @@ struct bnx2x_vf_bulletin {
uint16_t version;
uint16_t length;
- uint64_t valid_bitmap; /* bitmap indicating wich fields
+ uint64_t valid_bitmap; /* bitmap indicating which fields
* hold valid values
*/
diff --git a/drivers/net/bnx2x/ecore_hsi.h b/drivers/net/bnx2x/ecore_hsi.h
index 5808e1ae..5cce6647 100644
--- a/drivers/net/bnx2x/ecore_hsi.h
+++ b/drivers/net/bnx2x/ecore_hsi.h
@@ -2499,7 +2499,7 @@ struct shmem2_region {
* SHMEM_EEE_XXX_ADV definitions (where XXX is replaced by speed).
* bit 28 when 1'b1 EEE was requested.
* bit 29 when 1'b1 tx lpi was requested.
- * bit 30 when 1'b1 EEE was negotiated. Tx lpi will be asserted iff
+ * bit 30 when 1'b1 EEE was negotiated. Tx lpi will be asserted if
* 30:29 are 2'b11.
* bit 31 when 1'b0 bits 15:0 contain a PORT_FEAT_CFG_EEE_ define as
* value. When 1'b1 those bits contains a value times 16 microseconds.
@@ -3911,7 +3911,7 @@ struct client_init_rx_data
uint16_t bd_pause_thr_high /* number of remaining bds above which, we send un-pause message */;
uint16_t sge_pause_thr_low /* number of remaining sges under which, we send pause message */;
uint16_t sge_pause_thr_high /* number of remaining sges above which, we send un-pause message */;
- uint16_t rx_cos_mask /* the bits that will be set on pfc/ safc paket whith will be genratet when this ring is full. for regular flow control set this to 1 */;
+ uint16_t rx_cos_mask /* the bits that will be set on pfc/ safc paket with will be genratet when this ring is full. for regular flow control set this to 1 */;
uint16_t silent_vlan_value /* The vlan to compare, in case, silent vlan is set */;
uint16_t silent_vlan_mask /* The vlan mask, in case, silent vlan is set */;
uint32_t reserved6[2];
@@ -4903,7 +4903,7 @@ enum eth_tx_vlan_type
*/
enum eth_vlan_filter_mode
{
- ETH_VLAN_FILTER_ANY_VLAN /* Dont filter by vlan */,
+ ETH_VLAN_FILTER_ANY_VLAN /* Don't filter by vlan */,
ETH_VLAN_FILTER_SPECIFIC_VLAN /* Only the vlan_id is allowed */,
ETH_VLAN_FILTER_CLASSIFY /* Vlan will be added to CAM for classification */,
MAX_ETH_VLAN_FILTER_MODE};
@@ -4937,7 +4937,7 @@ struct mac_configuration_entry
#define MAC_CONFIGURATION_ENTRY_RDMA_MAC_SHIFT 1
#define MAC_CONFIGURATION_ENTRY_VLAN_FILTERING_MODE (0x3<<2) /* BitField flags (use enum eth_vlan_filter_mode) */
#define MAC_CONFIGURATION_ENTRY_VLAN_FILTERING_MODE_SHIFT 2
-#define MAC_CONFIGURATION_ENTRY_OVERRIDE_VLAN_REMOVAL (0x1<<4) /* BitField flags BitField flags 0 - cant remove vlan 1 - can remove vlan. relevant only to everest1 */
+#define MAC_CONFIGURATION_ENTRY_OVERRIDE_VLAN_REMOVAL (0x1<<4) /* BitField flags BitField flags 0 - can't remove vlan 1 - can remove vlan. relevant only to everest1 */
#define MAC_CONFIGURATION_ENTRY_OVERRIDE_VLAN_REMOVAL_SHIFT 4
#define MAC_CONFIGURATION_ENTRY_BROADCAST (0x1<<5) /* BitField flags BitField flags 0 - not broadcast 1 - broadcast. relevant only to everest1 */
#define MAC_CONFIGURATION_ENTRY_BROADCAST_SHIFT 5
@@ -5024,7 +5024,7 @@ struct tstorm_eth_function_common_config
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV6_TCP_CAPABILITY_SHIFT 3
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_MODE (0x7<<4) /* BitField config_flagsGeneral configuration flags RSS mode of operation (use enum eth_rss_mode) */
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_MODE_SHIFT 4
-#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_VLAN_FILTERING_ENABLE (0x1<<7) /* BitField config_flagsGeneral configuration flags 0 - Dont filter by vlan, 1 - Filter according to the vlans specificied in mac_filter_config */
+#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_VLAN_FILTERING_ENABLE (0x1<<7) /* BitField config_flagsGeneral configuration flags 0 - Don't filter by vlan, 1 - Filter according to the vlans specificied in mac_filter_config */
#define TSTORM_ETH_FUNCTION_COMMON_CONFIG_VLAN_FILTERING_ENABLE_SHIFT 7
#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0 (0xFF<<8) /* BitField config_flagsGeneral configuration flags */
#define __TSTORM_ETH_FUNCTION_COMMON_CONFIG_RESERVED0_SHIFT 8
@@ -5634,7 +5634,7 @@ struct flow_control_configuration
struct function_start_data
{
uint8_t function_mode /* the function mode */;
- uint8_t allow_npar_tx_switching /* If set, inter-pf tx switching is allowed in Switch Independant function mode. (E2/E3 Only) */;
+ uint8_t allow_npar_tx_switching /* If set, inter-pf tx switching is allowed in Switch Independent function mode. (E2/E3 Only) */;
uint16_t sd_vlan_tag /* value of Vlan in case of switch depended multi-function mode */;
uint16_t vif_id /* value of VIF id in case of NIV multi-function mode */;
uint8_t path_id;
diff --git a/drivers/net/bnx2x/ecore_init.h b/drivers/net/bnx2x/ecore_init.h
index d25e2803..4576c565 100644
--- a/drivers/net/bnx2x/ecore_init.h
+++ b/drivers/net/bnx2x/ecore_init.h
@@ -304,7 +304,7 @@ static inline void ecore_dcb_config_qm(struct bnx2x_softc *sc, enum cos_mode mod
/*
- * congestion managment port init api description
+ * congestion management port init api description
* the api works as follows:
* the driver should pass the cmng_init_input struct, the port_init function
* will prepare the required internal ram structure which will be passed back
diff --git a/drivers/net/bnx2x/ecore_sp.c b/drivers/net/bnx2x/ecore_sp.c
index 22f2dc95..ef7f9fea 100644
--- a/drivers/net/bnx2x/ecore_sp.c
+++ b/drivers/net/bnx2x/ecore_sp.c
@@ -2676,7 +2676,7 @@ static void ecore_mcast_hdl_del(struct bnx2x_softc *sc,
* @cmd:
* @start_cnt: first line in the ramrod data that may be used
*
- * This function is called iff there is enough place for the current command in
+ * This function is called if there is enough place for the current command in
* the ramrod data.
* Returns number of lines filled in the ramrod data in total.
*/
@@ -2834,7 +2834,7 @@ static int ecore_mcast_setup_e2(struct bnx2x_softc *sc,
if (ECORE_LIST_IS_EMPTY(&o->pending_cmds_head))
o->clear_sched(o);
- /* The below may be TRUE iff there was enough room in ramrod
+ /* The below may be TRUE if there was enough room in ramrod
* data for all pending commands and for the current
* command. Otherwise the current command would have been added
* to the pending commands and p->mcast_list_len would have been
diff --git a/drivers/net/bnx2x/ecore_sp.h b/drivers/net/bnx2x/ecore_sp.h
index 9c1f55df..e7ec96e9 100644
--- a/drivers/net/bnx2x/ecore_sp.h
+++ b/drivers/net/bnx2x/ecore_sp.h
@@ -1116,10 +1116,10 @@ struct ecore_config_rss_params {
/* RSS hash values */
uint32_t rss_key[10];
- /* valid only iff ECORE_RSS_UPDATE_TOE is set */
+ /* valid only if ECORE_RSS_UPDATE_TOE is set */
uint16_t toe_rss_bitmap;
- /* valid iff ECORE_RSS_TUNNELING is set */
+ /* valid if ECORE_RSS_TUNNELING is set */
uint16_t tunnel_value;
uint16_t tunnel_mask;
};
@@ -1286,14 +1286,14 @@ struct rxq_pause_params {
uint16_t bd_th_hi;
uint16_t rcq_th_lo;
uint16_t rcq_th_hi;
- uint16_t sge_th_lo; /* valid iff ECORE_Q_FLG_TPA */
- uint16_t sge_th_hi; /* valid iff ECORE_Q_FLG_TPA */
+ uint16_t sge_th_lo; /* valid if ECORE_Q_FLG_TPA */
+ uint16_t sge_th_hi; /* valid if ECORE_Q_FLG_TPA */
uint16_t pri_map;
};
/* general */
struct ecore_general_setup_params {
- /* valid iff ECORE_Q_FLG_STATS */
+ /* valid if ECORE_Q_FLG_STATS */
uint8_t stat_id;
uint8_t spcl_id;
@@ -1312,19 +1312,19 @@ struct ecore_rxq_setup_params {
uint8_t fw_sb_id;
uint8_t cl_qzone_id;
- /* valid iff ECORE_Q_FLG_TPA */
+ /* valid if ECORE_Q_FLG_TPA */
uint16_t tpa_agg_sz;
uint8_t max_tpa_queues;
uint8_t rss_engine_id;
- /* valid iff ECORE_Q_FLG_MCAST */
+ /* valid if ECORE_Q_FLG_MCAST */
uint8_t mcast_engine_id;
uint8_t cache_line_log;
uint8_t sb_cq_index;
- /* valid iff BXN2X_Q_FLG_SILENT_VLAN_REM */
+ /* valid if BXN2X_Q_FLG_SILENT_VLAN_REM */
uint16_t silent_removal_value;
uint16_t silent_removal_mask;
};
@@ -1335,12 +1335,12 @@ struct ecore_txq_setup_params {
uint8_t fw_sb_id;
uint8_t sb_cq_index;
- uint8_t cos; /* valid iff ECORE_Q_FLG_COS */
+ uint8_t cos; /* valid if ECORE_Q_FLG_COS */
uint16_t traffic_type;
/* equals to the leading rss client id, used for TX classification*/
uint8_t tss_leading_cl_id;
- /* valid iff ECORE_Q_FLG_DEF_VLAN */
+ /* valid if ECORE_Q_FLG_DEF_VLAN */
uint16_t default_vlan;
};
@@ -1733,7 +1733,7 @@ void ecore_init_mcast_obj(struct bnx2x_softc *sc,
* the current command will be enqueued to the tail of the
* pending commands list.
*
- * Return: 0 is operation was successfull and there are no pending completions,
+ * Return: 0 is operation was successful and there are no pending completions,
* negative if there were errors, positive if there are pending
* completions.
*/
diff --git a/drivers/net/bnx2x/elink.c b/drivers/net/bnx2x/elink.c
index 9ffa7dc6..9d0f3136 100644
--- a/drivers/net/bnx2x/elink.c
+++ b/drivers/net/bnx2x/elink.c
@@ -2702,7 +2702,7 @@ static elink_status_t elink_eee_initial_config(struct elink_params *params,
{
vars->eee_status |= ((uint32_t) mode) << SHMEM_EEE_SUPPORTED_SHIFT;
- /* Propogate params' bits --> vars (for migration exposure) */
+ /* Propagate params' bits --> vars (for migration exposure) */
if (params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI)
vars->eee_status |= SHMEM_EEE_LPI_REQUESTED_BIT;
else
@@ -3450,7 +3450,7 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy,
{MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0},
};
PMD_DRV_LOG(DEBUG, "Enable Auto Negotiation for KR");
- /* Set to default registers that may be overriden by 10G force */
+ /* Set to default registers that may be overridden by 10G force */
for (i = 0; i < ARRAY_SIZE(reg_set); i++)
elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg,
reg_set[i].val);
@@ -4363,14 +4363,14 @@ static void elink_sync_link(struct elink_params *params,
switch (vars->link_status & LINK_STATUS_SPEED_AND_DUPLEX_MASK) {
case ELINK_LINK_10THD:
vars->duplex = DUPLEX_HALF;
- /* Fall thru */
+ /* Fall through */
case ELINK_LINK_10TFD:
vars->line_speed = ELINK_SPEED_10;
break;
case ELINK_LINK_100TXHD:
vars->duplex = DUPLEX_HALF;
- /* Fall thru */
+ /* Fall through */
case ELINK_LINK_100T4:
case ELINK_LINK_100TXFD:
vars->line_speed = ELINK_SPEED_100;
@@ -4378,14 +4378,14 @@ static void elink_sync_link(struct elink_params *params,
case ELINK_LINK_1000THD:
vars->duplex = DUPLEX_HALF;
- /* Fall thru */
+ /* Fall through */
case ELINK_LINK_1000TFD:
vars->line_speed = ELINK_SPEED_1000;
break;
case ELINK_LINK_2500THD:
vars->duplex = DUPLEX_HALF;
- /* Fall thru */
+ /* Fall through */
case ELINK_LINK_2500TFD:
vars->line_speed = ELINK_SPEED_2500;
break;
@@ -6341,7 +6341,7 @@ elink_status_t elink_link_update(struct elink_params * params,
* hence its link is expected to be down
* - SECOND_PHY means that first phy should not be able
* to link up by itself (using configuration)
- * - DEFAULT should be overriden during initialiazation
+ * - DEFAULT should be overridden during initialization
*/
PMD_DRV_LOG(DEBUG, "Invalid link indication"
"mpc=0x%x. DISABLING LINK !!!",
@@ -12680,7 +12680,7 @@ static void elink_check_over_curr(struct elink_params *params,
vars->phy_flags &= ~PHY_OVER_CURRENT_FLAG;
}
-/* Returns 0 if no change occured since last check; 1 otherwise. */
+/* Returns 0 if no change occurred since last check; 1 otherwise. */
static uint8_t elink_analyze_link_error(struct elink_params *params,
struct elink_vars *vars,
uint32_t status, uint32_t phy_flag,