diff options
Diffstat (limited to 'drivers/net/bnxt/rte_pmd_bnxt.c')
-rw-r--r-- | drivers/net/bnxt/rte_pmd_bnxt.c | 52 |
1 files changed, 26 insertions, 26 deletions
diff --git a/drivers/net/bnxt/rte_pmd_bnxt.c b/drivers/net/bnxt/rte_pmd_bnxt.c index a3134074..cae95f8f 100644 --- a/drivers/net/bnxt/rte_pmd_bnxt.c +++ b/drivers/net/bnxt/rte_pmd_bnxt.c @@ -36,7 +36,7 @@ #include <unistd.h> #include <rte_dev.h> -#include <rte_ethdev.h> +#include <rte_ethdev_driver.h> #include <rte_malloc.h> #include <rte_cycles.h> #include <rte_byteorder.h> @@ -57,7 +57,7 @@ int bnxt_rcv_msg_from_vf(struct bnxt *bp, uint16_t vf_id, void *msg) ret_param.msg = msg; _rte_eth_dev_callback_process(bp->eth_dev, RTE_ETH_EVENT_VF_MBOX, - NULL, &ret_param); + &ret_param); /* Default to approve */ if (ret_param.retval == RTE_PMD_BNXT_MB_EVENT_PROCEED) @@ -85,7 +85,7 @@ int rte_pmd_bnxt_set_tx_loopback(uint16_t port, uint8_t on) bp = (struct bnxt *)eth_dev->data->dev_private; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to set Tx loopback on non-PF port %d!\n", port); return -ENOTSUP; @@ -127,7 +127,7 @@ int rte_pmd_bnxt_set_all_queues_drop_en(uint16_t port, uint8_t on) bp = (struct bnxt *)eth_dev->data->dev_private; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to set all queues drop on non-PF port!\n"); return -ENOTSUP; } @@ -140,7 +140,7 @@ int rte_pmd_bnxt_set_all_queues_drop_en(uint16_t port, uint8_t on) bp->vnic_info[i].bd_stall = !on; rc = bnxt_hwrm_vnic_cfg(bp, &bp->vnic_info[i]); if (rc) { - RTE_LOG(ERR, PMD, "Failed to update PF VNIC %d.\n", i); + PMD_DRV_LOG(ERR, "Failed to update PF VNIC %d.\n", i); return rc; } } @@ -151,7 +151,7 @@ int rte_pmd_bnxt_set_all_queues_drop_en(uint16_t port, uint8_t on) rte_pmd_bnxt_set_all_queues_drop_en_cb, &on, bnxt_hwrm_vnic_cfg); if (rc) { - RTE_LOG(ERR, PMD, "Failed to update VF VNIC %d.\n", i); + PMD_DRV_LOG(ERR, "Failed to update VF VNIC %d.\n", i); break; } } @@ -180,7 +180,7 @@ int rte_pmd_bnxt_set_vf_mac_addr(uint16_t port, uint16_t vf, return -EINVAL; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to set VF %d mac address on non-PF port %d!\n", vf, port); return -ENOTSUP; @@ -224,7 +224,7 @@ int rte_pmd_bnxt_set_vf_rate_limit(uint16_t port, uint16_t vf, /* Requested BW can't be greater than link speed */ if (tot_rate > eth_dev->data->dev_link.link_speed) { - RTE_LOG(ERR, PMD, "Rate > Link speed. Set to %d\n", tot_rate); + PMD_DRV_LOG(ERR, "Rate > Link speed. Set to %d\n", tot_rate); return -EINVAL; } @@ -262,7 +262,7 @@ int rte_pmd_bnxt_set_vf_mac_anti_spoof(uint16_t port, uint16_t vf, uint8_t on) bp = (struct bnxt *)dev->data->dev_private; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to set mac spoof on non-PF port %d!\n", port); return -EINVAL; } @@ -314,7 +314,7 @@ int rte_pmd_bnxt_set_vf_vlan_anti_spoof(uint16_t port, uint16_t vf, uint8_t on) bp = (struct bnxt *)dev->data->dev_private; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to set VLAN spoof on non-PF port %d!\n", port); return -EINVAL; } @@ -333,7 +333,7 @@ int rte_pmd_bnxt_set_vf_vlan_anti_spoof(uint16_t port, uint16_t vf, uint8_t on) rc = -1; } } else { - RTE_LOG(ERR, PMD, "Failed to update VF VNIC %d.\n", vf); + PMD_DRV_LOG(ERR, "Failed to update VF VNIC %d.\n", vf); } return rc; @@ -367,7 +367,7 @@ rte_pmd_bnxt_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on) return -EINVAL; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to set VF %d stripq on non-PF port %d!\n", vf, port); return -ENOTSUP; @@ -377,7 +377,7 @@ rte_pmd_bnxt_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on) rte_pmd_bnxt_set_vf_vlan_stripq_cb, &on, bnxt_hwrm_vnic_cfg); if (rc) - RTE_LOG(ERR, PMD, "Failed to update VF VNIC %d.\n", vf); + PMD_DRV_LOG(ERR, "Failed to update VF VNIC %d.\n", vf); return rc; } @@ -407,7 +407,7 @@ int rte_pmd_bnxt_set_vf_rxmode(uint16_t port, uint16_t vf, return -EINVAL; if (rx_mask & ETH_VMDQ_ACCEPT_UNTAG) { - RTE_LOG(ERR, PMD, "Currently cannot toggle this setting\n"); + PMD_DRV_LOG(ERR, "Currently cannot toggle this setting\n"); return -ENOTSUP; } @@ -430,7 +430,7 @@ int rte_pmd_bnxt_set_vf_rxmode(uint16_t port, uint16_t vf, &bp->pf.vf_info[vf].l2_rx_mask, bnxt_set_rx_mask_no_vlan); if (rc) - RTE_LOG(ERR, PMD, "bnxt_hwrm_func_vf_vnic_set_rxmask failed\n"); + PMD_DRV_LOG(ERR, "bnxt_hwrm_func_vf_vnic_set_rxmask failed\n"); return rc; } @@ -442,7 +442,7 @@ static int bnxt_set_vf_table(struct bnxt *bp, uint16_t vf) struct bnxt_vnic_info vnic; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to set VLAN table on non-PF port!\n"); return -EINVAL; } @@ -455,7 +455,7 @@ static int bnxt_set_vf_table(struct bnxt *bp, uint16_t vf) /* This simply indicates there's no driver loaded. * This is not an error. */ - RTE_LOG(ERR, PMD, "Unable to get default VNIC for VF %d\n", vf); + PMD_DRV_LOG(ERR, "Unable to get default VNIC for VF %d\n", vf); } else { memset(&vnic, 0, sizeof(vnic)); vnic.fw_vnic_id = dflt_vnic; @@ -518,9 +518,9 @@ int rte_pmd_bnxt_set_vf_vlan_filter(uint16_t port, uint16_t vlan, /* Now check that there's space */ if (cnt == getpagesize() / sizeof(struct bnxt_vlan_antispoof_table_entry)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "VLAN anti-spoof table is full\n"); - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "VF %d cannot add VLAN %u\n", i, vlan); rc = -1; @@ -585,7 +585,7 @@ int rte_pmd_bnxt_get_vf_stats(uint16_t port, return -EINVAL; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to get VF %d stats on non-PF port %d!\n", vf_id, port); return -ENOTSUP; @@ -612,7 +612,7 @@ int rte_pmd_bnxt_reset_vf_stats(uint16_t port, return -EINVAL; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to reset VF %d stats on non-PF port %d!\n", vf_id, port); return -ENOTSUP; @@ -638,7 +638,7 @@ int rte_pmd_bnxt_get_vf_rx_status(uint16_t port, uint16_t vf_id) return -EINVAL; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to query VF %d RX stats on non-PF port %d!\n", vf_id, port); return -ENOTSUP; @@ -665,7 +665,7 @@ int rte_pmd_bnxt_get_vf_tx_drop_count(uint16_t port, uint16_t vf_id, return -EINVAL; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to query VF %d TX drops on non-PF port %d!\n", vf_id, port); return -ENOTSUP; @@ -697,7 +697,7 @@ int rte_pmd_bnxt_mac_addr_add(uint16_t port, struct ether_addr *addr, return -EINVAL; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to config VF %d MAC on non-PF port %d!\n", vf_id, port); return -ENOTSUP; @@ -773,7 +773,7 @@ rte_pmd_bnxt_set_vf_vlan_insert(uint16_t port, uint16_t vf, return -EINVAL; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to set VF %d vlan insert on non-PF port %d!\n", vf, port); return -ENOTSUP; @@ -807,7 +807,7 @@ int rte_pmd_bnxt_set_vf_persist_stats(uint16_t port, uint16_t vf, uint8_t on) bp = (struct bnxt *)dev->data->dev_private; if (!BNXT_PF(bp)) { - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "Attempt to set persist stats on non-PF port %d!\n", port); return -EINVAL; |