diff options
Diffstat (limited to 'drivers/net/bonding/rte_eth_bond_8023ad.h')
| -rw-r--r-- | drivers/net/bonding/rte_eth_bond_8023ad.h | 222 |
1 files changed, 222 insertions, 0 deletions
diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.h b/drivers/net/bonding/rte_eth_bond_8023ad.h new file mode 100644 index 00000000..ebd0e934 --- /dev/null +++ b/drivers/net/bonding/rte_eth_bond_8023ad.h @@ -0,0 +1,222 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef RTE_ETH_BOND_8023AD_H_ +#define RTE_ETH_BOND_8023AD_H_ + +#include <rte_ether.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Actor/partner states + */ +#define STATE_LACP_ACTIVE 0x01 +#define STATE_LACP_SHORT_TIMEOUT 0x02 +#define STATE_AGGREGATION 0x04 +#define STATE_SYNCHRONIZATION 0x08 +#define STATE_COLLECTING 0x10 +#define STATE_DISTRIBUTING 0x20 +/** Partners parameters are defaulted */ +#define STATE_DEFAULTED 0x40 +#define STATE_EXPIRED 0x80 + +#define TLV_TYPE_ACTOR_INFORMATION 0x01 +#define TLV_TYPE_PARTNER_INFORMATION 0x02 +#define TLV_TYPE_COLLECTOR_INFORMATION 0x03 +#define TLV_TYPE_TERMINATOR_INFORMATION 0x00 + +#define SLOW_SUBTYPE_LACP 0x01 +#define SLOW_SUBTYPE_MARKER 0x02 + +#define MARKER_TLV_TYPE_INFO 0x01 +#define MARKER_TLV_TYPE_RESP 0x02 + +enum rte_bond_8023ad_selection { + UNSELECTED, + STANDBY, + SELECTED +}; + +/** Generic slow protocol structure */ +struct slow_protocol { + uint8_t subtype; + uint8_t reserved_119[119]; +} __attribute__((__packed__)); + +/** Generic slow protocol frame type structure */ +struct slow_protocol_frame { + struct ether_hdr eth_hdr; + struct slow_protocol slow_protocol; +} __attribute__((__packed__)); + +struct port_params { + uint16_t system_priority; + /**< System priority (unused in current implementation) */ + struct ether_addr system; + /**< System ID - Slave MAC address, same as bonding MAC address */ + uint16_t key; + /**< Speed information (implementation dependednt) and duplex. */ + uint16_t port_priority; + /**< Priority of this (unused in current implementation) */ + uint16_t port_number; + /**< Port number. It corresponds to slave port id. */ +} __attribute__((__packed__)); + +struct lacpdu_actor_partner_params { + uint8_t tlv_type_info; + uint8_t info_length; + struct port_params port_params; + uint8_t state; + uint8_t reserved_3[3]; +} __attribute__((__packed__)); + +/** LACPDU structure (5.4.2 in 802.1AX documentation). */ +struct lacpdu { + uint8_t subtype; + uint8_t version_number; + + struct lacpdu_actor_partner_params actor; + struct lacpdu_actor_partner_params partner; + + uint8_t tlv_type_collector_info; + uint8_t collector_info_length; + uint16_t collector_max_delay; + uint8_t reserved_12[12]; + + uint8_t tlv_type_terminator; + uint8_t terminator_length; + uint8_t reserved_50[50]; +} __attribute__((__packed__)); + +/** LACPDU frame: Contains ethernet header and LACPDU. */ +struct lacpdu_header { + struct ether_hdr eth_hdr; + struct lacpdu lacpdu; +} __attribute__((__packed__)); + +struct marker { + uint8_t subtype; + uint8_t version_number; + + uint8_t tlv_type_marker; + uint8_t info_length; + uint16_t requester_port; + struct ether_addr requester_system; + uint32_t requester_transaction_id; + uint8_t reserved_2[2]; + + uint8_t tlv_type_terminator; + uint8_t terminator_length; + uint8_t reserved_90[90]; +} __attribute__((__packed__)); + +struct marker_header { + struct ether_hdr eth_hdr; + struct marker marker; +} __attribute__((__packed__)); + +struct rte_eth_bond_8023ad_conf { + uint32_t fast_periodic_ms; + uint32_t slow_periodic_ms; + uint32_t short_timeout_ms; + uint32_t long_timeout_ms; + uint32_t aggregate_wait_timeout_ms; + uint32_t tx_period_ms; + uint32_t rx_marker_period_ms; + uint32_t update_timeout_ms; +}; + +struct rte_eth_bond_8023ad_slave_info { + enum rte_bond_8023ad_selection selected; + uint8_t actor_state; + struct port_params actor; + uint8_t partner_state; + struct port_params partner; + uint8_t agg_port_id; +}; + +/** + * @internal + * + * Function returns current configuration of 802.3AX mode. + * + * @param port_id Bonding device id + * @param conf Pointer to timeout structure. + * + * @return + * 0 - if ok + * -EINVAL if conf is NULL + */ +int +rte_eth_bond_8023ad_conf_get(uint8_t port_id, + struct rte_eth_bond_8023ad_conf *conf); + +/** + * @internal + * + * Function set new configuration of 802.3AX mode. + * + * @param port_id Bonding device id + * @param conf Configuration, if NULL set default configuration. + * @return + * 0 - if ok + * -EINVAL if configuration is invalid. + */ +int +rte_eth_bond_8023ad_setup(uint8_t port_id, + struct rte_eth_bond_8023ad_conf *conf); + +/** + * @internal + * + * Function returns current state of given slave device. + * + * @param slave_id Port id of valid slave. + * @param conf buffer for configuration + * @return + * 0 - if ok + * -EINVAL if conf is NULL or slave id is invalid (not a slave of given + * bonded device or is not inactive). + */ +int +rte_eth_bond_8023ad_slave_info(uint8_t port_id, uint8_t slave_id, + struct rte_eth_bond_8023ad_slave_info *conf); + +#ifdef __cplusplus +} +#endif + +#endif /* RTE_ETH_BOND_8023AD_H_ */ |