diff options
Diffstat (limited to 'drivers/net/cxgbe/base/t4_hw.c')
-rw-r--r-- | drivers/net/cxgbe/base/t4_hw.c | 378 |
1 files changed, 365 insertions, 13 deletions
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c index e5ef73b6..31762c9c 100644 --- a/drivers/net/cxgbe/base/t4_hw.c +++ b/drivers/net/cxgbe/base/t4_hw.c @@ -2480,6 +2480,46 @@ int t4_get_core_clock(struct adapter *adapter, struct vpd_params *p) return 0; } +/** + * t4_get_pfres - retrieve VF resource limits + * @adapter: the adapter + * + * Retrieves configured resource limits and capabilities for a physical + * function. The results are stored in @adapter->pfres. + */ +int t4_get_pfres(struct adapter *adapter) +{ + struct pf_resources *pfres = &adapter->params.pfres; + struct fw_pfvf_cmd cmd, rpl; + u32 word; + int v; + + /* + * Execute PFVF Read command to get VF resource limits; bail out early + * with error on command failure. + */ + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PFVF_CMD) | + F_FW_CMD_REQUEST | + F_FW_CMD_READ | + V_FW_PFVF_CMD_PFN(adapter->pf) | + V_FW_PFVF_CMD_VFN(0)); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + v = t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &rpl); + if (v != FW_SUCCESS) + return v; + + /* + * Extract PF resource limits and return success. + */ + word = be32_to_cpu(rpl.niqflint_niq); + pfres->niqflint = G_FW_PFVF_CMD_NIQFLINT(word); + + word = be32_to_cpu(rpl.type_to_neq); + pfres->neq = G_FW_PFVF_CMD_NEQ(word); + return 0; +} + /* serial flash and firmware constants and flash config file constants */ enum { SF_ATTEMPTS = 10, /* max retries for SF operations */ @@ -4491,6 +4531,31 @@ static void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl) } /** + * t4_ctrl_eq_free - free a control egress queue + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queue + * @vf: the VF owning the queue + * @eqid: egress queue id + * + * Frees a control egress queue. + */ +int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int eqid) +{ + struct fw_eq_ctrl_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_CTRL_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_EXEC | + V_FW_EQ_CTRL_CMD_PFN(pf) | + V_FW_EQ_CTRL_CMD_VFN(vf)); + c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_CTRL_CMD_FREE | FW_LEN16(c)); + c.cmpliqid_eqid = cpu_to_be32(V_FW_EQ_CTRL_CMD_EQID(eqid)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** * t4_handle_fw_rpl - process a FW reply message * @adap: the adapter * @rpl: start of the FW message @@ -4616,9 +4681,8 @@ struct flash_desc { int t4_get_flash_params(struct adapter *adapter) { /* - * Table for non-Numonix supported flash parts. Numonix parts are left - * to the preexisting well-tested code. All flash parts have 64KB - * sectors. + * Table for non-standard supported Flash parts. Note, all Flash + * parts must have 64KB sectors. */ static struct flash_desc supported_flash[] = { { 0x00150201, 4 << 20 }, /* Spansion 4MB S25FL032P */ @@ -4627,7 +4691,7 @@ int t4_get_flash_params(struct adapter *adapter) int ret; u32 flashid = 0; unsigned int part, manufacturer; - unsigned int density, size; + unsigned int density, size = 0; /** * Issue a Read ID Command to the Flash part. We decode supported @@ -4642,6 +4706,9 @@ int t4_get_flash_params(struct adapter *adapter) if (ret < 0) return ret; + /** + * Check to see if it's one of our non-standard supported Flash parts. + */ for (part = 0; part < ARRAY_SIZE(supported_flash); part++) { if (supported_flash[part].vendor_and_model_id == flashid) { adapter->params.sf_size = @@ -4652,6 +4719,15 @@ int t4_get_flash_params(struct adapter *adapter) } } + /** + * Decode Flash part size. The code below looks repetative with + * common encodings, but that's not guaranteed in the JEDEC + * specification for the Read JADEC ID command. The only thing that + * we're guaranteed by the JADEC specification is where the + * Manufacturer ID is in the returned result. After that each + * Manufacturer ~could~ encode things completely differently. + * Note, all Flash parts must have 64KB sectors. + */ manufacturer = flashid & 0xff; switch (manufacturer) { case 0x20: { /* Micron/Numonix */ @@ -4688,21 +4764,81 @@ int t4_get_flash_params(struct adapter *adapter) case 0x22: size = 1 << 28; /* 256MB */ break; - default: - dev_err(adapter, "Micron Flash Part has bad size, ID = %#x, Density code = %#x\n", - flashid, density); - return -EINVAL; } + break; + } - adapter->params.sf_size = size; - adapter->params.sf_nsec = size / SF_SEC_SIZE; + case 0x9d: { /* ISSI -- Integrated Silicon Solution, Inc. */ + /** + * This Density -> Size decoding table is taken from ISSI + * Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x16: + size = 1 << 25; /* 32MB */ + break; + case 0x17: + size = 1 << 26; /* 64MB */ + break; + } break; } - default: - dev_err(adapter, "Unsupported Flash Part, ID = %#x\n", flashid); - return -EINVAL; + + case 0xc2: { /* Macronix */ + /** + * This Density -> Size decoding table is taken from Macronix + * Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x17: + size = 1 << 23; /* 8MB */ + break; + case 0x18: + size = 1 << 24; /* 16MB */ + break; + } + break; } + case 0xef: { /* Winbond */ + /** + * This Density -> Size decoding table is taken from Winbond + * Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x17: + size = 1 << 23; /* 8MB */ + break; + case 0x18: + size = 1 << 24; /* 16MB */ + break; + } + break; + } + } + + /* If we didn't recognize the FLASH part, that's no real issue: the + * Hardware/Software contract says that Hardware will _*ALWAYS*_ + * use a FLASH part which is at least 4MB in size and has 64KB + * sectors. The unrecognized FLASH part is likely to be much larger + * than 4MB, but that's all we really need. + */ + if (size == 0) { + dev_warn(adapter, + "Unknown Flash Part, ID = %#x, assuming 4MB\n", + flashid); + size = 1 << 22; + } + + /** + * Store decoded Flash size and fall through into vetting code. + */ + adapter->params.sf_size = size; + adapter->params.sf_nsec = size / SF_SEC_SIZE; + found: /* * We should reject adapters with FLASHes which are too small. So, emit @@ -5007,6 +5143,8 @@ int t4_init_tp_params(struct adapter *adap) adap->params.tp.port_shift = t4_filter_field_shift(adap, F_PORT); adap->params.tp.protocol_shift = t4_filter_field_shift(adap, F_PROTOCOL); + adap->params.tp.ethertype_shift = t4_filter_field_shift(adap, + F_ETHERTYPE); /* * If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID @@ -5015,6 +5153,11 @@ int t4_init_tp_params(struct adapter *adap) if ((adap->params.tp.ingress_config & F_VNIC) == 0) adap->params.tp.vnic_shift = -1; + v = t4_read_reg(adap, LE_3_DB_HASH_MASK_GEN_IPV4_T6_A); + adap->params.tp.hash_filter_mask = v; + v = t4_read_reg(adap, LE_4_DB_HASH_MASK_GEN_IPV4_T6_A); + adap->params.tp.hash_filter_mask |= ((u64)v << 32); + return 0; } @@ -5190,3 +5333,212 @@ int t4_port_init(struct adapter *adap, int mbox, int pf, int vf) } return 0; } + +/** + * t4_memory_rw_addr - read/write adapter memory via PCIE memory window + * @adap: the adapter + * @win: PCI-E Memory Window to use + * @addr: address within adapter memory + * @len: amount of memory to transfer + * @hbuf: host memory buffer + * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0) + * + * Reads/writes an [almost] arbitrary memory region in the firmware: the + * firmware memory address and host buffer must be aligned on 32-bit + * boudaries; the length may be arbitrary. + * + * NOTES: + * 1. The memory is transferred as a raw byte sequence from/to the + * firmware's memory. If this memory contains data structures which + * contain multi-byte integers, it's the caller's responsibility to + * perform appropriate byte order conversions. + * + * 2. It is the Caller's responsibility to ensure that no other code + * uses the specified PCI-E Memory Window while this routine is + * using it. This is typically done via the use of OS-specific + * locks, etc. + */ +int t4_memory_rw_addr(struct adapter *adap, int win, u32 addr, + u32 len, void *hbuf, int dir) +{ + u32 pos, offset, resid; + u32 win_pf, mem_reg, mem_aperture, mem_base; + u32 *buf; + + /* Argument sanity checks ...*/ + if (addr & 0x3 || (uintptr_t)hbuf & 0x3) + return -EINVAL; + buf = (u32 *)hbuf; + + /* It's convenient to be able to handle lengths which aren't a + * multiple of 32-bits because we often end up transferring files to + * the firmware. So we'll handle that by normalizing the length here + * and then handling any residual transfer at the end. + */ + resid = len & 0x3; + len -= resid; + + /* Each PCI-E Memory Window is programmed with a window size -- or + * "aperture" -- which controls the granularity of its mapping onto + * adapter memory. We need to grab that aperture in order to know + * how to use the specified window. The window is also programmed + * with the base address of the Memory Window in BAR0's address + * space. For T4 this is an absolute PCI-E Bus Address. For T5 + * the address is relative to BAR0. + */ + mem_reg = t4_read_reg(adap, + PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_BASE_WIN, + win)); + mem_aperture = 1 << (G_WINDOW(mem_reg) + X_WINDOW_SHIFT); + mem_base = G_PCIEOFST(mem_reg) << X_PCIEOFST_SHIFT; + + win_pf = is_t4(adap->params.chip) ? 0 : V_PFNUM(adap->pf); + + /* Calculate our initial PCI-E Memory Window Position and Offset into + * that Window. + */ + pos = addr & ~(mem_aperture - 1); + offset = addr - pos; + + /* Set up initial PCI-E Memory Window to cover the start of our + * transfer. (Read it back to ensure that changes propagate before we + * attempt to use the new value.) + */ + t4_write_reg(adap, + PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, win), + pos | win_pf); + t4_read_reg(adap, + PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, win)); + + /* Transfer data to/from the adapter as long as there's an integral + * number of 32-bit transfers to complete. + * + * A note on Endianness issues: + * + * The "register" reads and writes below from/to the PCI-E Memory + * Window invoke the standard adapter Big-Endian to PCI-E Link + * Little-Endian "swizzel." As a result, if we have the following + * data in adapter memory: + * + * Memory: ... | b0 | b1 | b2 | b3 | ... + * Address: i+0 i+1 i+2 i+3 + * + * Then a read of the adapter memory via the PCI-E Memory Window + * will yield: + * + * x = readl(i) + * 31 0 + * [ b3 | b2 | b1 | b0 ] + * + * If this value is stored into local memory on a Little-Endian system + * it will show up correctly in local memory as: + * + * ( ..., b0, b1, b2, b3, ... ) + * + * But on a Big-Endian system, the store will show up in memory + * incorrectly swizzled as: + * + * ( ..., b3, b2, b1, b0, ... ) + * + * So we need to account for this in the reads and writes to the + * PCI-E Memory Window below by undoing the register read/write + * swizzels. + */ + while (len > 0) { + if (dir == T4_MEMORY_READ) + *buf++ = le32_to_cpu((__le32)t4_read_reg(adap, + mem_base + + offset)); + else + t4_write_reg(adap, mem_base + offset, + (u32)cpu_to_le32(*buf++)); + offset += sizeof(__be32); + len -= sizeof(__be32); + + /* If we've reached the end of our current window aperture, + * move the PCI-E Memory Window on to the next. Note that + * doing this here after "len" may be 0 allows us to set up + * the PCI-E Memory Window for a possible final residual + * transfer below ... + */ + if (offset == mem_aperture) { + pos += mem_aperture; + offset = 0; + t4_write_reg(adap, + PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, + win), pos | win_pf); + t4_read_reg(adap, + PCIE_MEM_ACCESS_REG(A_PCIE_MEM_ACCESS_OFFSET, + win)); + } + } + + /* If the original transfer had a length which wasn't a multiple of + * 32-bits, now's where we need to finish off the transfer of the + * residual amount. The PCI-E Memory Window has already been moved + * above (if necessary) to cover this final transfer. + */ + if (resid) { + union { + u32 word; + char byte[4]; + } last; + unsigned char *bp; + int i; + + if (dir == T4_MEMORY_READ) { + last.word = le32_to_cpu((__le32)t4_read_reg(adap, + mem_base + + offset)); + for (bp = (unsigned char *)buf, i = resid; i < 4; i++) + bp[i] = last.byte[i]; + } else { + last.word = *buf; + for (i = resid; i < 4; i++) + last.byte[i] = 0; + t4_write_reg(adap, mem_base + offset, + (u32)cpu_to_le32(last.word)); + } + } + + return 0; +} + +/** + * t4_memory_rw_mtype -read/write EDC 0, EDC 1 or MC via PCIE memory window + * @adap: the adapter + * @win: PCI-E Memory Window to use + * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC + * @maddr: address within indicated memory type + * @len: amount of memory to transfer + * @hbuf: host memory buffer + * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0) + * + * Reads/writes adapter memory using t4_memory_rw_addr(). This routine + * provides an (memory type, address within memory type) interface. + */ +int t4_memory_rw_mtype(struct adapter *adap, int win, int mtype, u32 maddr, + u32 len, void *hbuf, int dir) +{ + u32 mtype_offset; + u32 edc_size, mc_size; + + /* Offset into the region of memory which is being accessed + * MEM_EDC0 = 0 + * MEM_EDC1 = 1 + * MEM_MC = 2 -- MEM_MC for chips with only 1 memory controller + * MEM_MC1 = 3 -- for chips with 2 memory controllers (e.g. T5) + */ + edc_size = G_EDRAM0_SIZE(t4_read_reg(adap, A_MA_EDRAM0_BAR)); + if (mtype != MEM_MC1) { + mtype_offset = (mtype * (edc_size * 1024 * 1024)); + } else { + mc_size = G_EXT_MEM0_SIZE(t4_read_reg(adap, + A_MA_EXT_MEMORY0_BAR)); + mtype_offset = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024; + } + + return t4_memory_rw_addr(adap, win, + mtype_offset + maddr, len, + hbuf, dir); +} |