diff options
Diffstat (limited to 'drivers/net/cxgbe/base/t4_hw.c')
| -rw-r--r-- | drivers/net/cxgbe/base/t4_hw.c | 97 |
1 files changed, 84 insertions, 13 deletions
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c index 282e2e62..c3d46e02 100644 --- a/drivers/net/cxgbe/base/t4_hw.c +++ b/drivers/net/cxgbe/base/t4_hw.c @@ -4242,9 +4242,8 @@ struct flash_desc { int t4_get_flash_params(struct adapter *adapter) { /* - * Table for non-Numonix supported flash parts. Numonix parts are left - * to the preexisting well-tested code. All flash parts have 64KB - * sectors. + * Table for non-standard supported Flash parts. Note, all Flash + * parts must have 64KB sectors. */ static struct flash_desc supported_flash[] = { { 0x00150201, 4 << 20 }, /* Spansion 4MB S25FL032P */ @@ -4253,7 +4252,7 @@ int t4_get_flash_params(struct adapter *adapter) int ret; u32 flashid = 0; unsigned int part, manufacturer; - unsigned int density, size; + unsigned int density, size = 0; /** * Issue a Read ID Command to the Flash part. We decode supported @@ -4268,6 +4267,9 @@ int t4_get_flash_params(struct adapter *adapter) if (ret < 0) return ret; + /** + * Check to see if it's one of our non-standard supported Flash parts. + */ for (part = 0; part < ARRAY_SIZE(supported_flash); part++) { if (supported_flash[part].vendor_and_model_id == flashid) { adapter->params.sf_size = @@ -4278,6 +4280,15 @@ int t4_get_flash_params(struct adapter *adapter) } } + /** + * Decode Flash part size. The code below looks repetative with + * common encodings, but that's not guaranteed in the JEDEC + * specification for the Read JADEC ID command. The only thing that + * we're guaranteed by the JADEC specification is where the + * Manufacturer ID is in the returned result. After that each + * Manufacturer ~could~ encode things completely differently. + * Note, all Flash parts must have 64KB sectors. + */ manufacturer = flashid & 0xff; switch (manufacturer) { case 0x20: { /* Micron/Numonix */ @@ -4314,20 +4325,80 @@ int t4_get_flash_params(struct adapter *adapter) case 0x22: size = 1 << 28; /* 256MB */ break; - default: - dev_err(adapter, "Micron Flash Part has bad size, ID = %#x, Density code = %#x\n", - flashid, density); - return -EINVAL; } + break; + } - adapter->params.sf_size = size; - adapter->params.sf_nsec = size / SF_SEC_SIZE; + case 0x9d: { /* ISSI -- Integrated Silicon Solution, Inc. */ + /** + * This Density -> Size decoding table is taken from ISSI + * Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x16: + size = 1 << 25; /* 32MB */ + break; + case 0x17: + size = 1 << 26; /* 64MB */ + break; + } break; } - default: - dev_err(adapter, "Unsupported Flash Part, ID = %#x\n", flashid); - return -EINVAL; + + case 0xc2: { /* Macronix */ + /** + * This Density -> Size decoding table is taken from Macronix + * Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x17: + size = 1 << 23; /* 8MB */ + break; + case 0x18: + size = 1 << 24; /* 16MB */ + break; + } + break; + } + + case 0xef: { /* Winbond */ + /** + * This Density -> Size decoding table is taken from Winbond + * Data Sheets. + */ + density = (flashid >> 16) & 0xff; + switch (density) { + case 0x17: + size = 1 << 23; /* 8MB */ + break; + case 0x18: + size = 1 << 24; /* 16MB */ + break; + } + break; } + } + + /* If we didn't recognize the FLASH part, that's no real issue: the + * Hardware/Software contract says that Hardware will _*ALWAYS*_ + * use a FLASH part which is at least 4MB in size and has 64KB + * sectors. The unrecognized FLASH part is likely to be much larger + * than 4MB, but that's all we really need. + */ + if (size == 0) { + dev_warn(adapter, + "Unknown Flash Part, ID = %#x, assuming 4MB\n", + flashid); + size = 1 << 22; + } + + /** + * Store decoded Flash size and fall through into vetting code. + */ + adapter->params.sf_size = size; + adapter->params.sf_nsec = size / SF_SEC_SIZE; found: /* |