diff options
Diffstat (limited to 'drivers/net/cxgbe/base/t4_hw.c')
| -rw-r--r-- | drivers/net/cxgbe/base/t4_hw.c | 2686 |
1 files changed, 2686 insertions, 0 deletions
diff --git a/drivers/net/cxgbe/base/t4_hw.c b/drivers/net/cxgbe/base/t4_hw.c new file mode 100644 index 00000000..79af8067 --- /dev/null +++ b/drivers/net/cxgbe/base/t4_hw.c @@ -0,0 +1,2686 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2014-2015 Chelsio Communications. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Chelsio Communications nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <netinet/in.h> + +#include <rte_interrupts.h> +#include <rte_log.h> +#include <rte_debug.h> +#include <rte_pci.h> +#include <rte_atomic.h> +#include <rte_branch_prediction.h> +#include <rte_memory.h> +#include <rte_memzone.h> +#include <rte_tailq.h> +#include <rte_eal.h> +#include <rte_alarm.h> +#include <rte_ether.h> +#include <rte_ethdev.h> +#include <rte_atomic.h> +#include <rte_malloc.h> +#include <rte_random.h> +#include <rte_dev.h> +#include <rte_byteorder.h> + +#include "common.h" +#include "t4_regs.h" +#include "t4_regs_values.h" +#include "t4fw_interface.h" + +static void init_link_config(struct link_config *lc, unsigned int caps); + +/** + * t4_read_mtu_tbl - returns the values in the HW path MTU table + * @adap: the adapter + * @mtus: where to store the MTU values + * @mtu_log: where to store the MTU base-2 log (may be %NULL) + * + * Reads the HW path MTU table. + */ +void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log) +{ + u32 v; + int i; + + for (i = 0; i < NMTUS; ++i) { + t4_write_reg(adap, A_TP_MTU_TABLE, + V_MTUINDEX(0xff) | V_MTUVALUE(i)); + v = t4_read_reg(adap, A_TP_MTU_TABLE); + mtus[i] = G_MTUVALUE(v); + if (mtu_log) + mtu_log[i] = G_MTUWIDTH(v); + } +} + +/** + * t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register + * @adap: the adapter + * @addr: the indirect TP register address + * @mask: specifies the field within the register to modify + * @val: new value for the field + * + * Sets a field of an indirect TP register to the given value. + */ +void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr, + unsigned int mask, unsigned int val) +{ + t4_write_reg(adap, A_TP_PIO_ADDR, addr); + val |= t4_read_reg(adap, A_TP_PIO_DATA) & ~mask; + t4_write_reg(adap, A_TP_PIO_DATA, val); +} + +/* The minimum additive increment value for the congestion control table */ +#define CC_MIN_INCR 2U + +/** + * t4_load_mtus - write the MTU and congestion control HW tables + * @adap: the adapter + * @mtus: the values for the MTU table + * @alpha: the values for the congestion control alpha parameter + * @beta: the values for the congestion control beta parameter + * + * Write the HW MTU table with the supplied MTUs and the high-speed + * congestion control table with the supplied alpha, beta, and MTUs. + * We write the two tables together because the additive increments + * depend on the MTUs. + */ +void t4_load_mtus(struct adapter *adap, const unsigned short *mtus, + const unsigned short *alpha, const unsigned short *beta) +{ + static const unsigned int avg_pkts[NCCTRL_WIN] = { + 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640, + 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480, + 28672, 40960, 57344, 81920, 114688, 163840, 229376 + }; + + unsigned int i, w; + + for (i = 0; i < NMTUS; ++i) { + unsigned int mtu = mtus[i]; + unsigned int log2 = cxgbe_fls(mtu); + + if (!(mtu & ((1 << log2) >> 2))) /* round */ + log2--; + t4_write_reg(adap, A_TP_MTU_TABLE, V_MTUINDEX(i) | + V_MTUWIDTH(log2) | V_MTUVALUE(mtu)); + + for (w = 0; w < NCCTRL_WIN; ++w) { + unsigned int inc; + + inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w], + CC_MIN_INCR); + + t4_write_reg(adap, A_TP_CCTRL_TABLE, (i << 21) | + (w << 16) | (beta[w] << 13) | inc); + } + } +} + +/** + * t4_wait_op_done_val - wait until an operation is completed + * @adapter: the adapter performing the operation + * @reg: the register to check for completion + * @mask: a single-bit field within @reg that indicates completion + * @polarity: the value of the field when the operation is completed + * @attempts: number of check iterations + * @delay: delay in usecs between iterations + * @valp: where to store the value of the register at completion time + * + * Wait until an operation is completed by checking a bit in a register + * up to @attempts times. If @valp is not NULL the value of the register + * at the time it indicated completion is stored there. Returns 0 if the + * operation completes and -EAGAIN otherwise. + */ +int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask, + int polarity, int attempts, int delay, u32 *valp) +{ + while (1) { + u32 val = t4_read_reg(adapter, reg); + + if (!!(val & mask) == polarity) { + if (valp) + *valp = val; + return 0; + } + if (--attempts == 0) + return -EAGAIN; + if (delay) + udelay(delay); + } +} + +/** + * t4_set_reg_field - set a register field to a value + * @adapter: the adapter to program + * @addr: the register address + * @mask: specifies the portion of the register to modify + * @val: the new value for the register field + * + * Sets a register field specified by the supplied mask to the + * given value. + */ +void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask, + u32 val) +{ + u32 v = t4_read_reg(adapter, addr) & ~mask; + + t4_write_reg(adapter, addr, v | val); + (void)t4_read_reg(adapter, addr); /* flush */ +} + +/** + * t4_read_indirect - read indirectly addressed registers + * @adap: the adapter + * @addr_reg: register holding the indirect address + * @data_reg: register holding the value of the indirect register + * @vals: where the read register values are stored + * @nregs: how many indirect registers to read + * @start_idx: index of first indirect register to read + * + * Reads registers that are accessed indirectly through an address/data + * register pair. + */ +void t4_read_indirect(struct adapter *adap, unsigned int addr_reg, + unsigned int data_reg, u32 *vals, unsigned int nregs, + unsigned int start_idx) +{ + while (nregs--) { + t4_write_reg(adap, addr_reg, start_idx); + *vals++ = t4_read_reg(adap, data_reg); + start_idx++; + } +} + +/** + * t4_write_indirect - write indirectly addressed registers + * @adap: the adapter + * @addr_reg: register holding the indirect addresses + * @data_reg: register holding the value for the indirect registers + * @vals: values to write + * @nregs: how many indirect registers to write + * @start_idx: address of first indirect register to write + * + * Writes a sequential block of registers that are accessed indirectly + * through an address/data register pair. + */ +void t4_write_indirect(struct adapter *adap, unsigned int addr_reg, + unsigned int data_reg, const u32 *vals, + unsigned int nregs, unsigned int start_idx) +{ + while (nregs--) { + t4_write_reg(adap, addr_reg, start_idx++); + t4_write_reg(adap, data_reg, *vals++); + } +} + +/** + * t4_report_fw_error - report firmware error + * @adap: the adapter + * + * The adapter firmware can indicate error conditions to the host. + * If the firmware has indicated an error, print out the reason for + * the firmware error. + */ +static void t4_report_fw_error(struct adapter *adap) +{ + static const char * const reason[] = { + "Crash", /* PCIE_FW_EVAL_CRASH */ + "During Device Preparation", /* PCIE_FW_EVAL_PREP */ + "During Device Configuration", /* PCIE_FW_EVAL_CONF */ + "During Device Initialization", /* PCIE_FW_EVAL_INIT */ + "Unexpected Event", /* PCIE_FW_EVAL_UNEXPECTEDEVENT */ + "Insufficient Airflow", /* PCIE_FW_EVAL_OVERHEAT */ + "Device Shutdown", /* PCIE_FW_EVAL_DEVICESHUTDOWN */ + "Reserved", /* reserved */ + }; + u32 pcie_fw; + + pcie_fw = t4_read_reg(adap, A_PCIE_FW); + if (pcie_fw & F_PCIE_FW_ERR) + pr_err("%s: Firmware reports adapter error: %s\n", + __func__, reason[G_PCIE_FW_EVAL(pcie_fw)]); +} + +/* + * Get the reply to a mailbox command and store it in @rpl in big-endian order. + */ +static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit, + u32 mbox_addr) +{ + for ( ; nflit; nflit--, mbox_addr += 8) + *rpl++ = htobe64(t4_read_reg64(adap, mbox_addr)); +} + +/* + * Handle a FW assertion reported in a mailbox. + */ +static void fw_asrt(struct adapter *adap, u32 mbox_addr) +{ + struct fw_debug_cmd asrt; + + get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr); + pr_warn("FW assertion at %.16s:%u, val0 %#x, val1 %#x\n", + asrt.u.assert.filename_0_7, be32_to_cpu(asrt.u.assert.line), + be32_to_cpu(asrt.u.assert.x), be32_to_cpu(asrt.u.assert.y)); +} + +#define X_CIM_PF_NOACCESS 0xeeeeeeee + +/* + * If the Host OS Driver needs locking arround accesses to the mailbox, this + * can be turned on via the T4_OS_NEEDS_MBOX_LOCKING CPP define ... + */ +/* makes single-statement usage a bit cleaner ... */ +#ifdef T4_OS_NEEDS_MBOX_LOCKING +#define T4_OS_MBOX_LOCKING(x) x +#else +#define T4_OS_MBOX_LOCKING(x) do {} while (0) +#endif + +/** + * t4_wr_mbox_meat_timeout - send a command to FW through the given mailbox + * @adap: the adapter + * @mbox: index of the mailbox to use + * @cmd: the command to write + * @size: command length in bytes + * @rpl: where to optionally store the reply + * @sleep_ok: if true we may sleep while awaiting command completion + * @timeout: time to wait for command to finish before timing out + * (negative implies @sleep_ok=false) + * + * Sends the given command to FW through the selected mailbox and waits + * for the FW to execute the command. If @rpl is not %NULL it is used to + * store the FW's reply to the command. The command and its optional + * reply are of the same length. Some FW commands like RESET and + * INITIALIZE can take a considerable amount of time to execute. + * @sleep_ok determines whether we may sleep while awaiting the response. + * If sleeping is allowed we use progressive backoff otherwise we spin. + * Note that passing in a negative @timeout is an alternate mechanism + * for specifying @sleep_ok=false. This is useful when a higher level + * interface allows for specification of @timeout but not @sleep_ok ... + * + * Returns 0 on success or a negative errno on failure. A + * failure can happen either because we are not able to execute the + * command or FW executes it but signals an error. In the latter case + * the return value is the error code indicated by FW (negated). + */ +int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox, + const void __attribute__((__may_alias__)) *cmd, + int size, void *rpl, bool sleep_ok, int timeout) +{ + /* + * We delay in small increments at first in an effort to maintain + * responsiveness for simple, fast executing commands but then back + * off to larger delays to a maximum retry delay. + */ + static const int delay[] = { + 1, 1, 3, 5, 10, 10, 20, 50, 100 + }; + + u32 v; + u64 res; + int i, ms; + unsigned int delay_idx; + __be64 *temp = (__be64 *)malloc(size * sizeof(char)); + __be64 *p = temp; + u32 data_reg = PF_REG(mbox, A_CIM_PF_MAILBOX_DATA); + u32 ctl_reg = PF_REG(mbox, A_CIM_PF_MAILBOX_CTRL); + u32 ctl; + struct mbox_entry entry; + u32 pcie_fw = 0; + + if ((size & 15) || size > MBOX_LEN) { + free(temp); + return -EINVAL; + } + + bzero(p, size); + memcpy(p, (const __be64 *)cmd, size); + + /* + * If we have a negative timeout, that implies that we can't sleep. + */ + if (timeout < 0) { + sleep_ok = false; + timeout = -timeout; + } + +#ifdef T4_OS_NEEDS_MBOX_LOCKING + /* + * Queue ourselves onto the mailbox access list. When our entry is at + * the front of the list, we have rights to access the mailbox. So we + * wait [for a while] till we're at the front [or bail out with an + * EBUSY] ... + */ + t4_os_atomic_add_tail(&entry, &adap->mbox_list, &adap->mbox_lock); + + delay_idx = 0; + ms = delay[0]; + + for (i = 0; ; i += ms) { + /* + * If we've waited too long, return a busy indication. This + * really ought to be based on our initial position in the + * mailbox access list but this is a start. We very rarely + * contend on access to the mailbox ... Also check for a + * firmware error which we'll report as a device error. + */ + pcie_fw = t4_read_reg(adap, A_PCIE_FW); + if (i > 4 * timeout || (pcie_fw & F_PCIE_FW_ERR)) { + t4_os_atomic_list_del(&entry, &adap->mbox_list, + &adap->mbox_lock); + t4_report_fw_error(adap); + return (pcie_fw & F_PCIE_FW_ERR) ? -ENXIO : -EBUSY; + } + + /* + * If we're at the head, break out and start the mailbox + * protocol. + */ + if (t4_os_list_first_entry(&adap->mbox_list) == &entry) + break; + + /* + * Delay for a bit before checking again ... + */ + if (sleep_ok) { + ms = delay[delay_idx]; /* last element may repeat */ + if (delay_idx < ARRAY_SIZE(delay) - 1) + delay_idx++; + msleep(ms); + } else { + rte_delay_ms(ms); + } + } +#endif /* T4_OS_NEEDS_MBOX_LOCKING */ + + /* + * Attempt to gain access to the mailbox. + */ + for (i = 0; i < 4; i++) { + ctl = t4_read_reg(adap, ctl_reg); + v = G_MBOWNER(ctl); + if (v != X_MBOWNER_NONE) + break; + } + + /* + * If we were unable to gain access, dequeue ourselves from the + * mailbox atomic access list and report the error to our caller. + */ + if (v != X_MBOWNER_PL) { + T4_OS_MBOX_LOCKING(t4_os_atomic_list_del(&entry, + &adap->mbox_list, + &adap->mbox_lock)); + t4_report_fw_error(adap); + return (v == X_MBOWNER_FW ? -EBUSY : -ETIMEDOUT); + } + + /* + * If we gain ownership of the mailbox and there's a "valid" message + * in it, this is likely an asynchronous error message from the + * firmware. So we'll report that and then proceed on with attempting + * to issue our own command ... which may well fail if the error + * presaged the firmware crashing ... + */ + if (ctl & F_MBMSGVALID) { + dev_err(adap, "found VALID command in mbox %u: " + "%llx %llx %llx %llx %llx %llx %llx %llx\n", mbox, + (unsigned long long)t4_read_reg64(adap, data_reg), + (unsigned long long)t4_read_reg64(adap, data_reg + 8), + (unsigned long long)t4_read_reg64(adap, data_reg + 16), + (unsigned long long)t4_read_reg64(adap, data_reg + 24), + (unsigned long long)t4_read_reg64(adap, data_reg + 32), + (unsigned long long)t4_read_reg64(adap, data_reg + 40), + (unsigned long long)t4_read_reg64(adap, data_reg + 48), + (unsigned long long)t4_read_reg64(adap, data_reg + 56)); + } + + /* + * Copy in the new mailbox command and send it on its way ... + */ + for (i = 0; i < size; i += 8, p++) + t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p)); + + CXGBE_DEBUG_MBOX(adap, "%s: mbox %u: %016llx %016llx %016llx %016llx " + "%016llx %016llx %016llx %016llx\n", __func__, (mbox), + (unsigned long long)t4_read_reg64(adap, data_reg), + (unsigned long long)t4_read_reg64(adap, data_reg + 8), + (unsigned long long)t4_read_reg64(adap, data_reg + 16), + (unsigned long long)t4_read_reg64(adap, data_reg + 24), + (unsigned long long)t4_read_reg64(adap, data_reg + 32), + (unsigned long long)t4_read_reg64(adap, data_reg + 40), + (unsigned long long)t4_read_reg64(adap, data_reg + 48), + (unsigned long long)t4_read_reg64(adap, data_reg + 56)); + + t4_write_reg(adap, ctl_reg, F_MBMSGVALID | V_MBOWNER(X_MBOWNER_FW)); + t4_read_reg(adap, ctl_reg); /* flush write */ + + delay_idx = 0; + ms = delay[0]; + + /* + * Loop waiting for the reply; bail out if we time out or the firmware + * reports an error. + */ + pcie_fw = t4_read_reg(adap, A_PCIE_FW); + for (i = 0; i < timeout && !(pcie_fw & F_PCIE_FW_ERR); i += ms) { + if (sleep_ok) { + ms = delay[delay_idx]; /* last element may repeat */ + if (delay_idx < ARRAY_SIZE(delay) - 1) + delay_idx++; + msleep(ms); + } else { + msleep(ms); + } + + pcie_fw = t4_read_reg(adap, A_PCIE_FW); + v = t4_read_reg(adap, ctl_reg); + if (v == X_CIM_PF_NOACCESS) + continue; + if (G_MBOWNER(v) == X_MBOWNER_PL) { + if (!(v & F_MBMSGVALID)) { + t4_write_reg(adap, ctl_reg, + V_MBOWNER(X_MBOWNER_NONE)); + continue; + } + + CXGBE_DEBUG_MBOX(adap, + "%s: mbox %u: %016llx %016llx %016llx %016llx " + "%016llx %016llx %016llx %016llx\n", __func__, (mbox), + (unsigned long long)t4_read_reg64(adap, data_reg), + (unsigned long long)t4_read_reg64(adap, data_reg + 8), + (unsigned long long)t4_read_reg64(adap, data_reg + 16), + (unsigned long long)t4_read_reg64(adap, data_reg + 24), + (unsigned long long)t4_read_reg64(adap, data_reg + 32), + (unsigned long long)t4_read_reg64(adap, data_reg + 40), + (unsigned long long)t4_read_reg64(adap, data_reg + 48), + (unsigned long long)t4_read_reg64(adap, data_reg + 56)); + + CXGBE_DEBUG_MBOX(adap, + "command %#x completed in %d ms (%ssleeping)\n", + *(const u8 *)cmd, + i + ms, sleep_ok ? "" : "non-"); + + res = t4_read_reg64(adap, data_reg); + if (G_FW_CMD_OP(res >> 32) == FW_DEBUG_CMD) { + fw_asrt(adap, data_reg); + res = V_FW_CMD_RETVAL(EIO); + } else if (rpl) { + get_mbox_rpl(adap, rpl, size / 8, data_reg); + } + t4_write_reg(adap, ctl_reg, V_MBOWNER(X_MBOWNER_NONE)); + T4_OS_MBOX_LOCKING( + t4_os_atomic_list_del(&entry, &adap->mbox_list, + &adap->mbox_lock)); + return -G_FW_CMD_RETVAL((int)res); + } + } + + /* + * We timed out waiting for a reply to our mailbox command. Report + * the error and also check to see if the firmware reported any + * errors ... + */ + dev_err(adap, "command %#x in mailbox %d timed out\n", + *(const u8 *)cmd, mbox); + T4_OS_MBOX_LOCKING(t4_os_atomic_list_del(&entry, + &adap->mbox_list, + &adap->mbox_lock)); + t4_report_fw_error(adap); + free(temp); + return (pcie_fw & F_PCIE_FW_ERR) ? -ENXIO : -ETIMEDOUT; +} + +int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size, + void *rpl, bool sleep_ok) +{ + return t4_wr_mbox_meat_timeout(adap, mbox, cmd, size, rpl, sleep_ok, + FW_CMD_MAX_TIMEOUT); +} + +/** + * t4_config_rss_range - configure a portion of the RSS mapping table + * @adapter: the adapter + * @mbox: mbox to use for the FW command + * @viid: virtual interface whose RSS subtable is to be written + * @start: start entry in the table to write + * @n: how many table entries to write + * @rspq: values for the "response queue" (Ingress Queue) lookup table + * @nrspq: number of values in @rspq + * + * Programs the selected part of the VI's RSS mapping table with the + * provided values. If @nrspq < @n the supplied values are used repeatedly + * until the full table range is populated. + * + * The caller must ensure the values in @rspq are in the range allowed for + * @viid. + */ +int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid, + int start, int n, const u16 *rspq, unsigned int nrspq) +{ + int ret; + const u16 *rsp = rspq; + const u16 *rsp_end = rspq + nrspq; + struct fw_rss_ind_tbl_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_IND_TBL_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_WRITE | + V_FW_RSS_IND_TBL_CMD_VIID(viid)); + cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd)); + + /* + * Each firmware RSS command can accommodate up to 32 RSS Ingress + * Queue Identifiers. These Ingress Queue IDs are packed three to + * a 32-bit word as 10-bit values with the upper remaining 2 bits + * reserved. + */ + while (n > 0) { + int nq = min(n, 32); + int nq_packed = 0; + __be32 *qp = &cmd.iq0_to_iq2; + + /* + * Set up the firmware RSS command header to send the next + * "nq" Ingress Queue IDs to the firmware. + */ + cmd.niqid = cpu_to_be16(nq); + cmd.startidx = cpu_to_be16(start); + + /* + * "nq" more done for the start of the next loop. + */ + start += nq; + n -= nq; + + /* + * While there are still Ingress Queue IDs to stuff into the + * current firmware RSS command, retrieve them from the + * Ingress Queue ID array and insert them into the command. + */ + while (nq > 0) { + /* + * Grab up to the next 3 Ingress Queue IDs (wrapping + * around the Ingress Queue ID array if necessary) and + * insert them into the firmware RSS command at the + * current 3-tuple position within the commad. + */ + u16 qbuf[3]; + u16 *qbp = qbuf; + int nqbuf = min(3, nq); + + nq -= nqbuf; + qbuf[0] = 0; + qbuf[1] = 0; + qbuf[2] = 0; + while (nqbuf && nq_packed < 32) { + nqbuf--; + nq_packed++; + *qbp++ = *rsp++; + if (rsp >= rsp_end) + rsp = rspq; + } + *qp++ = cpu_to_be32(V_FW_RSS_IND_TBL_CMD_IQ0(qbuf[0]) | + V_FW_RSS_IND_TBL_CMD_IQ1(qbuf[1]) | + V_FW_RSS_IND_TBL_CMD_IQ2(qbuf[2])); + } + + /* + * Send this portion of the RRS table update to the firmware; + * bail out on any errors. + */ + ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL); + if (ret) + return ret; + } + + return 0; +} + +/** + * t4_config_vi_rss - configure per VI RSS settings + * @adapter: the adapter + * @mbox: mbox to use for the FW command + * @viid: the VI id + * @flags: RSS flags + * @defq: id of the default RSS queue for the VI. + * + * Configures VI-specific RSS properties. + */ +int t4_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid, + unsigned int flags, unsigned int defq) +{ + struct fw_rss_vi_config_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_WRITE | + V_FW_RSS_VI_CONFIG_CMD_VIID(viid)); + c.retval_len16 = cpu_to_be32(FW_LEN16(c)); + c.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(flags | + V_FW_RSS_VI_CONFIG_CMD_DEFAULTQ(defq)); + return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL); +} + +/** + * init_cong_ctrl - initialize congestion control parameters + * @a: the alpha values for congestion control + * @b: the beta values for congestion control + * + * Initialize the congestion control parameters. + */ +static void init_cong_ctrl(unsigned short *a, unsigned short *b) +{ + int i; + + for (i = 0; i < 9; i++) { + a[i] = 1; + b[i] = 0; + } + + a[9] = 2; + a[10] = 3; + a[11] = 4; + a[12] = 5; + a[13] = 6; + a[14] = 7; + a[15] = 8; + a[16] = 9; + a[17] = 10; + a[18] = 14; + a[19] = 17; + a[20] = 21; + a[21] = 25; + a[22] = 30; + a[23] = 35; + a[24] = 45; + a[25] = 60; + a[26] = 80; + a[27] = 100; + a[28] = 200; + a[29] = 300; + a[30] = 400; + a[31] = 500; + + b[9] = 1; + b[10] = 1; + b[11] = 2; + b[12] = 2; + b[13] = 3; + b[14] = 3; + b[15] = 3; + b[16] = 3; + b[17] = 4; + b[18] = 4; + b[19] = 4; + b[20] = 4; + b[21] = 4; + b[22] = 5; + b[23] = 5; + b[24] = 5; + b[25] = 5; + b[26] = 5; + b[27] = 5; + b[28] = 6; + b[29] = 6; + b[30] = 7; + b[31] = 7; +} + +#define INIT_CMD(var, cmd, rd_wr) do { \ + (var).op_to_write = cpu_to_be32(V_FW_CMD_OP(FW_##cmd##_CMD) | \ + F_FW_CMD_REQUEST | F_FW_CMD_##rd_wr); \ + (var).retval_len16 = cpu_to_be32(FW_LEN16(var)); \ +} while (0) + +int t4_get_core_clock(struct adapter *adapter, struct vpd_params *p) +{ + u32 cclk_param, cclk_val; + int ret; + + /* + * Ask firmware for the Core Clock since it knows how to translate the + * Reference Clock ('V2') VPD field into a Core Clock value ... + */ + cclk_param = (V_FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | + V_FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_CCLK)); + ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0, + 1, &cclk_param, &cclk_val); + if (ret) { + dev_err(adapter, "%s: error in fetching from coreclock - %d\n", + __func__, ret); + return ret; + } + + p->cclk = cclk_val; + dev_debug(adapter, "%s: p->cclk = %u\n", __func__, p->cclk); + return 0; +} + +/* serial flash and firmware constants and flash config file constants */ +enum { + SF_ATTEMPTS = 10, /* max retries for SF operations */ + + /* flash command opcodes */ + SF_PROG_PAGE = 2, /* program page */ + SF_WR_DISABLE = 4, /* disable writes */ + SF_RD_STATUS = 5, /* read status register */ + SF_WR_ENABLE = 6, /* enable writes */ + SF_RD_DATA_FAST = 0xb, /* read flash */ + SF_RD_ID = 0x9f, /* read ID */ + SF_ERASE_SECTOR = 0xd8, /* erase sector */ +}; + +/** + * sf1_read - read data from the serial flash + * @adapter: the adapter + * @byte_cnt: number of bytes to read + * @cont: whether another operation will be chained + * @lock: whether to lock SF for PL access only + * @valp: where to store the read data + * + * Reads up to 4 bytes of data from the serial flash. The location of + * the read needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont, + int lock, u32 *valp) +{ + int ret; + + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (t4_read_reg(adapter, A_SF_OP) & F_BUSY) + return -EBUSY; + t4_write_reg(adapter, A_SF_OP, + V_SF_LOCK(lock) | V_CONT(cont) | V_BYTECNT(byte_cnt - 1)); + ret = t4_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 5); + if (!ret) + *valp = t4_read_reg(adapter, A_SF_DATA); + return ret; +} + +/** + * sf1_write - write data to the serial flash + * @adapter: the adapter + * @byte_cnt: number of bytes to write + * @cont: whether another operation will be chained + * @lock: whether to lock SF for PL access only + * @val: value to write + * + * Writes up to 4 bytes of data to the serial flash. The location of + * the write needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont, + int lock, u32 val) +{ + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (t4_read_reg(adapter, A_SF_OP) & F_BUSY) + return -EBUSY; + t4_write_reg(adapter, A_SF_DATA, val); + t4_write_reg(adapter, A_SF_OP, V_SF_LOCK(lock) | + V_CONT(cont) | V_BYTECNT(byte_cnt - 1) | V_OP(1)); + return t4_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 5); +} + +/** + * t4_read_flash - read words from serial flash + * @adapter: the adapter + * @addr: the start address for the read + * @nwords: how many 32-bit words to read + * @data: where to store the read data + * @byte_oriented: whether to store data as bytes or as words + * + * Read the specified number of 32-bit words from the serial flash. + * If @byte_oriented is set the read data is stored as a byte array + * (i.e., big-endian), otherwise as 32-bit words in the platform's + * natural endianness. + */ +int t4_read_flash(struct adapter *adapter, unsigned int addr, + unsigned int nwords, u32 *data, int byte_oriented) +{ + int ret; + + if (((addr + nwords * sizeof(u32)) > adapter->params.sf_size) || + (addr & 3)) + return -EINVAL; + + addr = rte_constant_bswap32(addr) | SF_RD_DATA_FAST; + + ret = sf1_write(adapter, 4, 1, 0, addr); + if (ret != 0) + return ret; + + ret = sf1_read(adapter, 1, 1, 0, data); + if (ret != 0) + return ret; + + for ( ; nwords; nwords--, data++) { + ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data); + if (nwords == 1) + t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */ + if (ret) + return ret; + if (byte_oriented) + *data = cpu_to_be32(*data); + } + return 0; +} + +/** + * t4_get_fw_version - read the firmware version + * @adapter: the adapter + * @vers: where to place the version + * + * Reads the FW version from flash. + */ +int t4_get_fw_version(struct adapter *adapter, u32 *vers) +{ + return t4_read_flash(adapter, FLASH_FW_START + + offsetof(struct fw_hdr, fw_ver), 1, vers, 0); +} + +/** + * t4_get_tp_version - read the TP microcode version + * @adapter: the adapter + * @vers: where to place the version + * + * Reads the TP microcode version from flash. + */ +int t4_get_tp_version(struct adapter *adapter, u32 *vers) +{ + return t4_read_flash(adapter, FLASH_FW_START + + offsetof(struct fw_hdr, tp_microcode_ver), + 1, vers, 0); +} + +#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_40G | \ + FW_PORT_CAP_SPEED_100G | FW_PORT_CAP_ANEG) + +/** + * t4_link_l1cfg - apply link configuration to MAC/PHY + * @phy: the PHY to setup + * @mac: the MAC to setup + * @lc: the requested link configuration + * + * Set up a port's MAC and PHY according to a desired link configuration. + * - If the PHY can auto-negotiate first decide what to advertise, then + * enable/disable auto-negotiation as desired, and reset. + * - If the PHY does not auto-negotiate just reset it. + * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC, + * otherwise do it later based on the outcome of auto-negotiation. + */ +int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port, + struct link_config *lc) +{ + struct fw_port_cmd c; + unsigned int fc = 0, mdi = V_FW_PORT_CAP_MDI(FW_PORT_CAP_MDI_AUTO); + + lc->link_ok = 0; + if (lc->requested_fc & PAUSE_RX) + fc |= FW_PORT_CAP_FC_RX; + if (lc->requested_fc & PAUSE_TX) + fc |= FW_PORT_CAP_FC_TX; + + memset(&c, 0, sizeof(c)); + c.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_EXEC | + V_FW_PORT_CMD_PORTID(port)); + c.action_to_len16 = + cpu_to_be32(V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) | + FW_LEN16(c)); + + if (!(lc->supported & FW_PORT_CAP_ANEG)) { + c.u.l1cfg.rcap = cpu_to_be32((lc->supported & ADVERT_MASK) | + fc); + lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + } else if (lc->autoneg == AUTONEG_DISABLE) { + c.u.l1cfg.rcap = cpu_to_be32(lc->requested_speed | fc | mdi); + lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + } else { + c.u.l1cfg.rcap = cpu_to_be32(lc->advertising | fc | mdi); + } + + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_flash_cfg_addr - return the address of the flash configuration file + * @adapter: the adapter + * + * Return the address within the flash where the Firmware Configuration + * File is stored, or an error if the device FLASH is too small to contain + * a Firmware Configuration File. + */ +int t4_flash_cfg_addr(struct adapter *adapter) +{ + /* + * If the device FLASH isn't large enough to hold a Firmware + * Configuration File, return an error. + */ + if (adapter->params.sf_size < FLASH_CFG_START + FLASH_CFG_MAX_SIZE) + return -ENOSPC; + + return FLASH_CFG_START; +} + +#define PF_INTR_MASK (F_PFSW | F_PFCIM) + +/** + * t4_intr_enable - enable interrupts + * @adapter: the adapter whose interrupts should be enabled + * + * Enable PF-specific interrupts for the calling function and the top-level + * interrupt concentrator for global interrupts. Interrupts are already + * enabled at each module, here we just enable the roots of the interrupt + * hierarchies. + * + * Note: this function should be called only when the driver manages + * non PF-specific interrupts from the various HW modules. Only one PCI + * function at a time should be doing this. + */ +void t4_intr_enable(struct adapter *adapter) +{ + u32 val = 0; + u32 pf = G_SOURCEPF(t4_read_reg(adapter, A_PL_WHOAMI)); + + if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) + val = F_ERR_DROPPED_DB | F_ERR_EGR_CTXT_PRIO | F_DBFIFO_HP_INT; + t4_write_reg(adapter, A_SGE_INT_ENABLE3, F_ERR_CPL_EXCEED_IQE_SIZE | + F_ERR_INVALID_CIDX_INC | F_ERR_CPL_OPCODE_0 | + F_ERR_DATA_CPL_ON_HIGH_QID1 | F_INGRESS_SIZE_ERR | + F_ERR_DATA_CPL_ON_HIGH_QID0 | F_ERR_BAD_DB_PIDX3 | + F_ERR_BAD_DB_PIDX2 | F_ERR_BAD_DB_PIDX1 | + F_ERR_BAD_DB_PIDX0 | F_ERR_ING_CTXT_PRIO | + F_DBFIFO_LP_INT | F_EGRESS_SIZE_ERR | val); + t4_write_reg(adapter, MYPF_REG(A_PL_PF_INT_ENABLE), PF_INTR_MASK); + t4_set_reg_field(adapter, A_PL_INT_MAP0, 0, 1 << pf); +} + +/** + * t4_intr_disable - disable interrupts + * @adapter: the adapter whose interrupts should be disabled + * + * Disable interrupts. We only disable the top-level interrupt + * concentrators. The caller must be a PCI function managing global + * interrupts. + */ +void t4_intr_disable(struct adapter *adapter) +{ + u32 pf = G_SOURCEPF(t4_read_reg(adapter, A_PL_WHOAMI)); + + t4_write_reg(adapter, MYPF_REG(A_PL_PF_INT_ENABLE), 0); + t4_set_reg_field(adapter, A_PL_INT_MAP0, 1 << pf, 0); +} + +/** + * t4_get_port_type_description - return Port Type string description + * @port_type: firmware Port Type enumeration + */ +const char *t4_get_port_type_description(enum fw_port_type port_type) +{ + static const char * const port_type_description[] = { + "Fiber_XFI", + "Fiber_XAUI", + "BT_SGMII", + "BT_XFI", + "BT_XAUI", + "KX4", + "CX4", + "KX", + "KR", + "SFP", + "BP_AP", + "BP4_AP", + "QSFP_10G", + "QSA", + "QSFP", + "BP40_BA", + }; + + if (port_type < ARRAY_SIZE(port_type_description)) + return port_type_description[port_type]; + return "UNKNOWN"; +} + +/** + * t4_get_mps_bg_map - return the buffer groups associated with a port + * @adap: the adapter + * @idx: the port index + * + * Returns a bitmap indicating which MPS buffer groups are associated + * with the given port. Bit i is set if buffer group i is used by the + * port. + */ +unsigned int t4_get_mps_bg_map(struct adapter *adap, int idx) +{ + u32 n = G_NUMPORTS(t4_read_reg(adap, A_MPS_CMN_CTL)); + + if (n == 0) + return idx == 0 ? 0xf : 0; + if (n == 1) + return idx < 2 ? (3 << (2 * idx)) : 0; + return 1 << idx; +} + +/** + * t4_get_port_stats - collect port statistics + * @adap: the adapter + * @idx: the port index + * @p: the stats structure to fill + * + * Collect statistics related to the given port from HW. + */ +void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p) +{ + u32 bgmap = t4_get_mps_bg_map(adap, idx); + +#define GET_STAT(name) \ + t4_read_reg64(adap, \ + (is_t4(adap->params.chip) ? \ + PORT_REG(idx, A_MPS_PORT_STAT_##name##_L) :\ + T5_PORT_REG(idx, A_MPS_PORT_STAT_##name##_L))) +#define GET_STAT_COM(name) t4_read_reg64(adap, A_MPS_STAT_##name##_L) + + p->tx_octets = GET_STAT(TX_PORT_BYTES); + p->tx_frames = GET_STAT(TX_PORT_FRAMES); + p->tx_bcast_frames = GET_STAT(TX_PORT_BCAST); + p->tx_mcast_frames = GET_STAT(TX_PORT_MCAST); + p->tx_ucast_frames = GET_STAT(TX_PORT_UCAST); + p->tx_error_frames = GET_STAT(TX_PORT_ERROR); + p->tx_frames_64 = GET_STAT(TX_PORT_64B); + p->tx_frames_65_127 = GET_STAT(TX_PORT_65B_127B); + p->tx_frames_128_255 = GET_STAT(TX_PORT_128B_255B); + p->tx_frames_256_511 = GET_STAT(TX_PORT_256B_511B); + p->tx_frames_512_1023 = GET_STAT(TX_PORT_512B_1023B); + p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B); + p->tx_frames_1519_max = GET_STAT(TX_PORT_1519B_MAX); + p->tx_drop = GET_STAT(TX_PORT_DROP); + p->tx_pause = GET_STAT(TX_PORT_PAUSE); + p->tx_ppp0 = GET_STAT(TX_PORT_PPP0); + p->tx_ppp1 = GET_STAT(TX_PORT_PPP1); + p->tx_ppp2 = GET_STAT(TX_PORT_PPP2); + p->tx_ppp3 = GET_STAT(TX_PORT_PPP3); + p->tx_ppp4 = GET_STAT(TX_PORT_PPP4); + p->tx_ppp5 = GET_STAT(TX_PORT_PPP5); + p->tx_ppp6 = GET_STAT(TX_PORT_PPP6); + p->tx_ppp7 = GET_STAT(TX_PORT_PPP7); + + p->rx_octets = GET_STAT(RX_PORT_BYTES); + p->rx_frames = GET_STAT(RX_PORT_FRAMES); + p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST); + p->rx_mcast_frames = GET_STAT(RX_PORT_MCAST); + p->rx_ucast_frames = GET_STAT(RX_PORT_UCAST); + p->rx_too_long = GET_STAT(RX_PORT_MTU_ERROR); + p->rx_jabber = GET_STAT(RX_PORT_MTU_CRC_ERROR); + p->rx_fcs_err = GET_STAT(RX_PORT_CRC_ERROR); + p->rx_len_err = GET_STAT(RX_PORT_LEN_ERROR); + p->rx_symbol_err = GET_STAT(RX_PORT_SYM_ERROR); + p->rx_runt = GET_STAT(RX_PORT_LESS_64B); + p->rx_frames_64 = GET_STAT(RX_PORT_64B); + p->rx_frames_65_127 = GET_STAT(RX_PORT_65B_127B); + p->rx_frames_128_255 = GET_STAT(RX_PORT_128B_255B); + p->rx_frames_256_511 = GET_STAT(RX_PORT_256B_511B); + p->rx_frames_512_1023 = GET_STAT(RX_PORT_512B_1023B); + p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B); + p->rx_frames_1519_max = GET_STAT(RX_PORT_1519B_MAX); + p->rx_pause = GET_STAT(RX_PORT_PAUSE); + p->rx_ppp0 = GET_STAT(RX_PORT_PPP0); + p->rx_ppp1 = GET_STAT(RX_PORT_PPP1); + p->rx_ppp2 = GET_STAT(RX_PORT_PPP2); + p->rx_ppp3 = GET_STAT(RX_PORT_PPP3); + p->rx_ppp4 = GET_STAT(RX_PORT_PPP4); + p->rx_ppp5 = GET_STAT(RX_PORT_PPP5); + p->rx_ppp6 = GET_STAT(RX_PORT_PPP6); + p->rx_ppp7 = GET_STAT(RX_PORT_PPP7); + p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0; + p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0; + p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0; + p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0; + p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0; + p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0; + p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0; + p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0; + +#undef GET_STAT +#undef GET_STAT_COM +} + +/** + * t4_get_port_stats_offset - collect port stats relative to a previous snapshot + * @adap: The adapter + * @idx: The port + * @stats: Current stats to fill + * @offset: Previous stats snapshot + */ +void t4_get_port_stats_offset(struct adapter *adap, int idx, + struct port_stats *stats, + struct port_stats *offset) +{ + u64 *s, *o; + unsigned int i; + + t4_get_port_stats(adap, idx, stats); + for (i = 0, s = (u64 *)stats, o = (u64 *)offset; + i < (sizeof(struct port_stats) / sizeof(u64)); + i++, s++, o++) + *s -= *o; +} + +/** + * t4_clr_port_stats - clear port statistics + * @adap: the adapter + * @idx: the port index + * + * Clear HW statistics for the given port. + */ +void t4_clr_port_stats(struct adapter *adap, int idx) +{ + unsigned int i; + u32 bgmap = t4_get_mps_bg_map(adap, idx); + u32 port_base_addr; + + if (is_t4(adap->params.chip)) + port_base_addr = PORT_BASE(idx); + else + port_base_addr = T5_PORT_BASE(idx); + + for (i = A_MPS_PORT_STAT_TX_PORT_BYTES_L; + i <= A_MPS_PORT_STAT_TX_PORT_PPP7_H; i += 8) + t4_write_reg(adap, port_base_addr + i, 0); + for (i = A_MPS_PORT_STAT_RX_PORT_BYTES_L; + i <= A_MPS_PORT_STAT_RX_PORT_LESS_64B_H; i += 8) + t4_write_reg(adap, port_base_addr + i, 0); + for (i = 0; i < 4; i++) + if (bgmap & (1 << i)) { + t4_write_reg(adap, + A_MPS_STAT_RX_BG_0_MAC_DROP_FRAME_L + + i * 8, 0); + t4_write_reg(adap, + A_MPS_STAT_RX_BG_0_MAC_TRUNC_FRAME_L + + i * 8, 0); + } +} + +/** + * t4_fw_hello - establish communication with FW + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @evt_mbox: mailbox to receive async FW events + * @master: specifies the caller's willingness to be the device master + * @state: returns the current device state (if non-NULL) + * + * Issues a command to establish communication with FW. Returns either + * an error (negative integer) or the mailbox of the Master PF. + */ +int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, + enum dev_master master, enum dev_state *state) +{ + int ret; + struct fw_hello_cmd c; + u32 v; + unsigned int master_mbox; + int retries = FW_CMD_HELLO_RETRIES; + +retry: + memset(&c, 0, sizeof(c)); + INIT_CMD(c, HELLO, WRITE); + c.err_to_clearinit = cpu_to_be32( + V_FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) | + V_FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) | + V_FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : + M_FW_HELLO_CMD_MBMASTER) | + V_FW_HELLO_CMD_MBASYNCNOT(evt_mbox) | + V_FW_HELLO_CMD_STAGE(FW_HELLO_CMD_STAGE_OS) | + F_FW_HELLO_CMD_CLEARINIT); + + /* + * Issue the HELLO command to the firmware. If it's not successful + * but indicates that we got a "busy" or "timeout" condition, retry + * the HELLO until we exhaust our retry limit. If we do exceed our + * retry limit, check to see if the firmware left us any error + * information and report that if so ... + */ + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret != FW_SUCCESS) { + if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0) + goto retry; + if (t4_read_reg(adap, A_PCIE_FW) & F_PCIE_FW_ERR) + t4_report_fw_error(adap); + return ret; + } + + v = be32_to_cpu(c.err_to_clearinit); + master_mbox = G_FW_HELLO_CMD_MBMASTER(v); + if (state) { + if (v & F_FW_HELLO_CMD_ERR) + *state = DEV_STATE_ERR; + else if (v & F_FW_HELLO_CMD_INIT) + *state = DEV_STATE_INIT; + else + *state = DEV_STATE_UNINIT; + } + + /* + * If we're not the Master PF then we need to wait around for the + * Master PF Driver to finish setting up the adapter. + * + * Note that we also do this wait if we're a non-Master-capable PF and + * there is no current Master PF; a Master PF may show up momentarily + * and we wouldn't want to fail pointlessly. (This can happen when an + * OS loads lots of different drivers rapidly at the same time). In + * this case, the Master PF returned by the firmware will be + * M_PCIE_FW_MASTER so the test below will work ... + */ + if ((v & (F_FW_HELLO_CMD_ERR | F_FW_HELLO_CMD_INIT)) == 0 && + master_mbox != mbox) { + int waiting = FW_CMD_HELLO_TIMEOUT; + + /* + * Wait for the firmware to either indicate an error or + * initialized state. If we see either of these we bail out + * and report the issue to the caller. If we exhaust the + * "hello timeout" and we haven't exhausted our retries, try + * again. Otherwise bail with a timeout error. + */ + for (;;) { + u32 pcie_fw; + + msleep(50); + waiting -= 50; + + /* + * If neither Error nor Initialialized are indicated + * by the firmware keep waiting till we exaust our + * timeout ... and then retry if we haven't exhausted + * our retries ... + */ + pcie_fw = t4_read_reg(adap, A_PCIE_FW); + if (!(pcie_fw & (F_PCIE_FW_ERR | F_PCIE_FW_INIT))) { + if (waiting <= 0) { + if (retries-- > 0) + goto retry; + + return -ETIMEDOUT; + } + continue; + } + + /* + * We either have an Error or Initialized condition + * report errors preferentially. + */ + if (state) { + if (pcie_fw & F_PCIE_FW_ERR) + *state = DEV_STATE_ERR; + else if (pcie_fw & F_PCIE_FW_INIT) + *state = DEV_STATE_INIT; + } + + /* + * If we arrived before a Master PF was selected and + * there's not a valid Master PF, grab its identity + * for our caller. + */ + if (master_mbox == M_PCIE_FW_MASTER && + (pcie_fw & F_PCIE_FW_MASTER_VLD)) + master_mbox = G_PCIE_FW_MASTER(pcie_fw); + break; + } + } + + return master_mbox; +} + +/** + * t4_fw_bye - end communication with FW + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * + * Issues a command to terminate communication with FW. + */ +int t4_fw_bye(struct adapter *adap, unsigned int mbox) +{ + struct fw_bye_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, BYE, WRITE); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_fw_reset - issue a reset to FW + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @reset: specifies the type of reset to perform + * + * Issues a reset command of the specified type to FW. + */ +int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset) +{ + struct fw_reset_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, RESET, WRITE); + c.val = cpu_to_be32(reset); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_fw_halt - issue a reset/halt to FW and put uP into RESET + * @adap: the adapter + * @mbox: mailbox to use for the FW RESET command (if desired) + * @force: force uP into RESET even if FW RESET command fails + * + * Issues a RESET command to firmware (if desired) with a HALT indication + * and then puts the microprocessor into RESET state. The RESET command + * will only be issued if a legitimate mailbox is provided (mbox <= + * M_PCIE_FW_MASTER). + * + * This is generally used in order for the host to safely manipulate the + * adapter without fear of conflicting with whatever the firmware might + * be doing. The only way out of this state is to RESTART the firmware + * ... + */ +int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force) +{ + int ret = 0; + + /* + * If a legitimate mailbox is provided, issue a RESET command + * with a HALT indication. + */ + if (mbox <= M_PCIE_FW_MASTER) { + struct fw_reset_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, RESET, WRITE); + c.val = cpu_to_be32(F_PIORST | F_PIORSTMODE); + c.halt_pkd = cpu_to_be32(F_FW_RESET_CMD_HALT); + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); + } + + /* + * Normally we won't complete the operation if the firmware RESET + * command fails but if our caller insists we'll go ahead and put the + * uP into RESET. This can be useful if the firmware is hung or even + * missing ... We'll have to take the risk of putting the uP into + * RESET without the cooperation of firmware in that case. + * + * We also force the firmware's HALT flag to be on in case we bypassed + * the firmware RESET command above or we're dealing with old firmware + * which doesn't have the HALT capability. This will serve as a flag + * for the incoming firmware to know that it's coming out of a HALT + * rather than a RESET ... if it's new enough to understand that ... + */ + if (ret == 0 || force) { + t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, F_UPCRST); + t4_set_reg_field(adap, A_PCIE_FW, F_PCIE_FW_HALT, + F_PCIE_FW_HALT); + } + + /* + * And we always return the result of the firmware RESET command + * even when we force the uP into RESET ... + */ + return ret; +} + +/** + * t4_fw_restart - restart the firmware by taking the uP out of RESET + * @adap: the adapter + * @mbox: mailbox to use for the FW RESET command (if desired) + * @reset: if we want to do a RESET to restart things + * + * Restart firmware previously halted by t4_fw_halt(). On successful + * return the previous PF Master remains as the new PF Master and there + * is no need to issue a new HELLO command, etc. + * + * We do this in two ways: + * + * 1. If we're dealing with newer firmware we'll simply want to take + * the chip's microprocessor out of RESET. This will cause the + * firmware to start up from its start vector. And then we'll loop + * until the firmware indicates it's started again (PCIE_FW.HALT + * reset to 0) or we timeout. + * + * 2. If we're dealing with older firmware then we'll need to RESET + * the chip since older firmware won't recognize the PCIE_FW.HALT + * flag and automatically RESET itself on startup. + */ +int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset) +{ + if (reset) { + /* + * Since we're directing the RESET instead of the firmware + * doing it automatically, we need to clear the PCIE_FW.HALT + * bit. + */ + t4_set_reg_field(adap, A_PCIE_FW, F_PCIE_FW_HALT, 0); + + /* + * If we've been given a valid mailbox, first try to get the + * firmware to do the RESET. If that works, great and we can + * return success. Otherwise, if we haven't been given a + * valid mailbox or the RESET command failed, fall back to + * hitting the chip with a hammer. + */ + if (mbox <= M_PCIE_FW_MASTER) { + t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, 0); + msleep(100); + if (t4_fw_reset(adap, mbox, + F_PIORST | F_PIORSTMODE) == 0) + return 0; + } + + t4_write_reg(adap, A_PL_RST, F_PIORST | F_PIORSTMODE); + msleep(2000); + } else { + int ms; + + t4_set_reg_field(adap, A_CIM_BOOT_CFG, F_UPCRST, 0); + for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) { + if (!(t4_read_reg(adap, A_PCIE_FW) & F_PCIE_FW_HALT)) + return FW_SUCCESS; + msleep(100); + ms += 100; + } + return -ETIMEDOUT; + } + return 0; +} + +/** + * t4_fixup_host_params_compat - fix up host-dependent parameters + * @adap: the adapter + * @page_size: the host's Base Page Size + * @cache_line_size: the host's Cache Line Size + * @chip_compat: maintain compatibility with designated chip + * + * Various registers in the chip contain values which are dependent on the + * host's Base Page and Cache Line Sizes. This function will fix all of + * those registers with the appropriate values as passed in ... + * + * @chip_compat is used to limit the set of changes that are made + * to be compatible with the indicated chip release. This is used by + * drivers to maintain compatibility with chip register settings when + * the drivers haven't [yet] been updated with new chip support. + */ +int t4_fixup_host_params_compat(struct adapter *adap, + unsigned int page_size, + unsigned int cache_line_size, + enum chip_type chip_compat) +{ + unsigned int page_shift = cxgbe_fls(page_size) - 1; + unsigned int sge_hps = page_shift - 10; + unsigned int stat_len = cache_line_size > 64 ? 128 : 64; + unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size; + unsigned int fl_align_log = cxgbe_fls(fl_align) - 1; + + t4_write_reg(adap, A_SGE_HOST_PAGE_SIZE, + V_HOSTPAGESIZEPF0(sge_hps) | + V_HOSTPAGESIZEPF1(sge_hps) | + V_HOSTPAGESIZEPF2(sge_hps) | + V_HOSTPAGESIZEPF3(sge_hps) | + V_HOSTPAGESIZEPF4(sge_hps) | + V_HOSTPAGESIZEPF5(sge_hps) | + V_HOSTPAGESIZEPF6(sge_hps) | + V_HOSTPAGESIZEPF7(sge_hps)); + + if (is_t4(adap->params.chip) || is_t4(chip_compat)) + t4_set_reg_field(adap, A_SGE_CONTROL, + V_INGPADBOUNDARY(M_INGPADBOUNDARY) | + F_EGRSTATUSPAGESIZE, + V_INGPADBOUNDARY(fl_align_log - + X_INGPADBOUNDARY_SHIFT) | + V_EGRSTATUSPAGESIZE(stat_len != 64)); + else { + /* + * T5 introduced the separation of the Free List Padding and + * Packing Boundaries. Thus, we can select a smaller Padding + * Boundary to avoid uselessly chewing up PCIe Link and Memory + * Bandwidth, and use a Packing Boundary which is large enough + * to avoid false sharing between CPUs, etc. + * + * For the PCI Link, the smaller the Padding Boundary the + * better. For the Memory Controller, a smaller Padding + * Boundary is better until we cross under the Memory Line + * Size (the minimum unit of transfer to/from Memory). If we + * have a Padding Boundary which is smaller than the Memory + * Line Size, that'll involve a Read-Modify-Write cycle on the + * Memory Controller which is never good. For T5 the smallest + * Padding Boundary which we can select is 32 bytes which is + * larger than any known Memory Controller Line Size so we'll + * use that. + */ + + /* + * N.B. T5 has a different interpretation of the "0" value for + * the Packing Boundary. This corresponds to 16 bytes instead + * of the expected 32 bytes. We never have a Packing Boundary + * less than 32 bytes so we can't use that special value but + * on the other hand, if we wanted 32 bytes, the best we can + * really do is 64 bytes ... + */ + if (fl_align <= 32) { + fl_align = 64; + fl_align_log = 6; + } + t4_set_reg_field(adap, A_SGE_CONTROL, + V_INGPADBOUNDARY(M_INGPADBOUNDARY) | + F_EGRSTATUSPAGESIZE, + V_INGPADBOUNDARY(X_INGPCIEBOUNDARY_32B) | + V_EGRSTATUSPAGESIZE(stat_len != 64)); + t4_set_reg_field(adap, A_SGE_CONTROL2, + V_INGPACKBOUNDARY(M_INGPACKBOUNDARY), + V_INGPACKBOUNDARY(fl_align_log - + X_INGPACKBOUNDARY_SHIFT)); + } + + /* + * Adjust various SGE Free List Host Buffer Sizes. + * + * The first four entries are: + * + * 0: Host Page Size + * 1: 64KB + * 2: Buffer size corresponding to 1500 byte MTU (unpacked mode) + * 3: Buffer size corresponding to 9000 byte MTU (unpacked mode) + * + * For the single-MTU buffers in unpacked mode we need to include + * space for the SGE Control Packet Shift, 14 byte Ethernet header, + * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet + * Padding boundary. All of these are accommodated in the Factory + * Default Firmware Configuration File but we need to adjust it for + * this host's cache line size. + */ + t4_write_reg(adap, A_SGE_FL_BUFFER_SIZE0, page_size); + t4_write_reg(adap, A_SGE_FL_BUFFER_SIZE2, + (t4_read_reg(adap, A_SGE_FL_BUFFER_SIZE2) + fl_align - 1) + & ~(fl_align - 1)); + t4_write_reg(adap, A_SGE_FL_BUFFER_SIZE3, + (t4_read_reg(adap, A_SGE_FL_BUFFER_SIZE3) + fl_align - 1) + & ~(fl_align - 1)); + + t4_write_reg(adap, A_ULP_RX_TDDP_PSZ, V_HPZ0(page_shift - 12)); + + return 0; +} + +/** + * t4_fixup_host_params - fix up host-dependent parameters (T4 compatible) + * @adap: the adapter + * @page_size: the host's Base Page Size + * @cache_line_size: the host's Cache Line Size + * + * Various registers in T4 contain values which are dependent on the + * host's Base Page and Cache Line Sizes. This function will fix all of + * those registers with the appropriate values as passed in ... + * + * This routine makes changes which are compatible with T4 chips. + */ +int t4_fixup_host_params(struct adapter *adap, unsigned int page_size, + unsigned int cache_line_size) +{ + return t4_fixup_host_params_compat(adap, page_size, cache_line_size, + T4_LAST_REV); +} + +/** + * t4_fw_initialize - ask FW to initialize the device + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * + * Issues a command to FW to partially initialize the device. This + * performs initialization that generally doesn't depend on user input. + */ +int t4_fw_initialize(struct adapter *adap, unsigned int mbox) +{ + struct fw_initialize_cmd c; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, INITIALIZE, WRITE); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_query_params_rw - query FW or device parameters + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF + * @vf: the VF + * @nparams: the number of parameters + * @params: the parameter names + * @val: the parameter values + * @rw: Write and read flag + * + * Reads the value of FW or device parameters. Up to 7 parameters can be + * queried at once. + */ +static int t4_query_params_rw(struct adapter *adap, unsigned int mbox, + unsigned int pf, unsigned int vf, + unsigned int nparams, const u32 *params, + u32 *val, int rw) +{ + unsigned int i; + int ret; + struct fw_params_cmd c; + __be32 *p = &c.param[0].mnem; + + if (nparams > 7) + return -EINVAL; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_READ | + V_FW_PARAMS_CMD_PFN(pf) | + V_FW_PARAMS_CMD_VFN(vf)); + c.retval_len16 = cpu_to_be32(FW_LEN16(c)); + + for (i = 0; i < nparams; i++) { + *p++ = cpu_to_be32(*params++); + if (rw) + *p = cpu_to_be32(*(val + i)); + p++; + } + + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret == 0) + for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2) + *val++ = be32_to_cpu(*p); + return ret; +} + +int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int nparams, const u32 *params, + u32 *val) +{ + return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0); +} + +/** + * t4_set_params_timeout - sets FW or device parameters + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF + * @vf: the VF + * @nparams: the number of parameters + * @params: the parameter names + * @val: the parameter values + * @timeout: the timeout time + * + * Sets the value of FW or device parameters. Up to 7 parameters can be + * specified at once. + */ +int t4_set_params_timeout(struct adapter *adap, unsigned int mbox, + unsigned int pf, unsigned int vf, + unsigned int nparams, const u32 *params, + const u32 *val, int timeout) +{ + struct fw_params_cmd c; + __be32 *p = &c.param[0].mnem; + + if (nparams > 7) + return -EINVAL; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_PARAMS_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_WRITE | + V_FW_PARAMS_CMD_PFN(pf) | + V_FW_PARAMS_CMD_VFN(vf)); + c.retval_len16 = cpu_to_be32(FW_LEN16(c)); + + while (nparams--) { + *p++ = cpu_to_be32(*params++); + *p++ = cpu_to_be32(*val++); + } + + return t4_wr_mbox_timeout(adap, mbox, &c, sizeof(c), NULL, timeout); +} + +int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int nparams, const u32 *params, + const u32 *val) +{ + return t4_set_params_timeout(adap, mbox, pf, vf, nparams, params, val, + FW_CMD_MAX_TIMEOUT); +} + +/** + * t4_alloc_vi_func - allocate a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @port: physical port associated with the VI + * @pf: the PF owning the VI + * @vf: the VF owning the VI + * @nmac: number of MAC addresses needed (1 to 5) + * @mac: the MAC addresses of the VI + * @rss_size: size of RSS table slice associated with this VI + * @portfunc: which Port Application Function MAC Address is desired + * @idstype: Intrusion Detection Type + * + * Allocates a virtual interface for the given physical port. If @mac is + * not %NULL it contains the MAC addresses of the VI as assigned by FW. + * @mac should be large enough to hold @nmac Ethernet addresses, they are + * stored consecutively so the space needed is @nmac * 6 bytes. + * Returns a negative error number or the non-negative VI id. + */ +int t4_alloc_vi_func(struct adapter *adap, unsigned int mbox, + unsigned int port, unsigned int pf, unsigned int vf, + unsigned int nmac, u8 *mac, unsigned int *rss_size, + unsigned int portfunc, unsigned int idstype) +{ + int ret; + struct fw_vi_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_WRITE | F_FW_CMD_EXEC | + V_FW_VI_CMD_PFN(pf) | V_FW_VI_CMD_VFN(vf)); + c.alloc_to_len16 = cpu_to_be32(F_FW_VI_CMD_ALLOC | FW_LEN16(c)); + c.type_to_viid = cpu_to_be16(V_FW_VI_CMD_TYPE(idstype) | + V_FW_VI_CMD_FUNC(portfunc)); + c.portid_pkd = V_FW_VI_CMD_PORTID(port); + c.nmac = nmac - 1; + + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret) + return ret; + + if (mac) { + memcpy(mac, c.mac, sizeof(c.mac)); + switch (nmac) { + case 5: + memcpy(mac + 24, c.nmac3, sizeof(c.nmac3)); + /* FALLTHROUGH */ + case 4: + memcpy(mac + 18, c.nmac2, sizeof(c.nmac2)); + /* FALLTHROUGH */ + case 3: + memcpy(mac + 12, c.nmac1, sizeof(c.nmac1)); + /* FALLTHROUGH */ + case 2: + memcpy(mac + 6, c.nmac0, sizeof(c.nmac0)); + /* FALLTHROUGH */ + } + } + if (rss_size) + *rss_size = G_FW_VI_CMD_RSSSIZE(be16_to_cpu(c.norss_rsssize)); + return G_FW_VI_CMD_VIID(cpu_to_be16(c.type_to_viid)); +} + +/** + * t4_alloc_vi - allocate an [Ethernet Function] virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @port: physical port associated with the VI + * @pf: the PF owning the VI + * @vf: the VF owning the VI + * @nmac: number of MAC addresses needed (1 to 5) + * @mac: the MAC addresses of the VI + * @rss_size: size of RSS table slice associated with this VI + * + * Backwards compatible and convieniance routine to allocate a Virtual + * Interface with a Ethernet Port Application Function and Intrustion + * Detection System disabled. + */ +int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port, + unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac, + unsigned int *rss_size) +{ + return t4_alloc_vi_func(adap, mbox, port, pf, vf, nmac, mac, rss_size, + FW_VI_FUNC_ETH, 0); +} + +/** + * t4_free_vi - free a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the VI + * @vf: the VF owning the VI + * @viid: virtual interface identifiler + * + * Free a previously allocated virtual interface. + */ +int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int viid) +{ + struct fw_vi_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_VI_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_VI_CMD_PFN(pf) | + V_FW_VI_CMD_VFN(vf)); + c.alloc_to_len16 = cpu_to_be32(F_FW_VI_CMD_FREE | FW_LEN16(c)); + c.type_to_viid = cpu_to_be16(V_FW_VI_CMD_VIID(viid)); + + return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); +} + +/** + * t4_set_rxmode - set Rx properties of a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @mtu: the new MTU or -1 + * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change + * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change + * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change + * @vlanex: 1 to enable hardware VLAN Tag extraction, 0 to disable it, + * -1 no change + * @sleep_ok: if true we may sleep while awaiting command completion + * + * Sets Rx properties of a virtual interface. + */ +int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid, + int mtu, int promisc, int all_multi, int bcast, int vlanex, + bool sleep_ok) +{ + struct fw_vi_rxmode_cmd c; + + /* convert to FW values */ + if (mtu < 0) + mtu = M_FW_VI_RXMODE_CMD_MTU; + if (promisc < 0) + promisc = M_FW_VI_RXMODE_CMD_PROMISCEN; + if (all_multi < 0) + all_multi = M_FW_VI_RXMODE_CMD_ALLMULTIEN; + if (bcast < 0) + bcast = M_FW_VI_RXMODE_CMD_BROADCASTEN; + if (vlanex < 0) + vlanex = M_FW_VI_RXMODE_CMD_VLANEXEN; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_RXMODE_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_WRITE | + V_FW_VI_RXMODE_CMD_VIID(viid)); + c.retval_len16 = cpu_to_be32(FW_LEN16(c)); + c.mtu_to_vlanexen = cpu_to_be32(V_FW_VI_RXMODE_CMD_MTU(mtu) | + V_FW_VI_RXMODE_CMD_PROMISCEN(promisc) | + V_FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) | + V_FW_VI_RXMODE_CMD_BROADCASTEN(bcast) | + V_FW_VI_RXMODE_CMD_VLANEXEN(vlanex)); + return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok); +} + +/** + * t4_change_mac - modifies the exact-match filter for a MAC address + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @idx: index of existing filter for old value of MAC address, or -1 + * @addr: the new MAC address value + * @persist: whether a new MAC allocation should be persistent + * @add_smt: if true also add the address to the HW SMT + * + * Modifies an exact-match filter and sets it to the new MAC address if + * @idx >= 0, or adds the MAC address to a new filter if @idx < 0. In the + * latter case the address is added persistently if @persist is %true. + * + * Note that in general it is not possible to modify the value of a given + * filter so the generic way to modify an address filter is to free the one + * being used by the old address value and allocate a new filter for the + * new address value. + * + * Returns a negative error number or the index of the filter with the new + * MAC value. Note that this index may differ from @idx. + */ +int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid, + int idx, const u8 *addr, bool persist, bool add_smt) +{ + int ret, mode; + struct fw_vi_mac_cmd c; + struct fw_vi_mac_exact *p = c.u.exact; + int max_mac_addr = adap->params.arch.mps_tcam_size; + + if (idx < 0) /* new allocation */ + idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC; + mode = add_smt ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_MAC_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_WRITE | + V_FW_VI_MAC_CMD_VIID(viid)); + c.freemacs_to_len16 = cpu_to_be32(V_FW_CMD_LEN16(1)); + p->valid_to_idx = cpu_to_be16(F_FW_VI_MAC_CMD_VALID | + V_FW_VI_MAC_CMD_SMAC_RESULT(mode) | + V_FW_VI_MAC_CMD_IDX(idx)); + memcpy(p->macaddr, addr, sizeof(p->macaddr)); + + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret == 0) { + ret = G_FW_VI_MAC_CMD_IDX(be16_to_cpu(p->valid_to_idx)); + if (ret >= max_mac_addr) + ret = -ENOMEM; + } + return ret; +} + +/** + * t4_enable_vi_params - enable/disable a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @rx_en: 1=enable Rx, 0=disable Rx + * @tx_en: 1=enable Tx, 0=disable Tx + * @dcb_en: 1=enable delivery of Data Center Bridging messages. + * + * Enables/disables a virtual interface. Note that setting DCB Enable + * only makes sense when enabling a Virtual Interface ... + */ +int t4_enable_vi_params(struct adapter *adap, unsigned int mbox, + unsigned int viid, bool rx_en, bool tx_en, bool dcb_en) +{ + struct fw_vi_enable_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = cpu_to_be32(V_FW_CMD_OP(FW_VI_ENABLE_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_EXEC | + V_FW_VI_ENABLE_CMD_VIID(viid)); + c.ien_to_len16 = cpu_to_be32(V_FW_VI_ENABLE_CMD_IEN(rx_en) | + V_FW_VI_ENABLE_CMD_EEN(tx_en) | + V_FW_VI_ENABLE_CMD_DCB_INFO(dcb_en) | + FW_LEN16(c)); + return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_enable_vi - enable/disable a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @rx_en: 1=enable Rx, 0=disable Rx + * @tx_en: 1=enable Tx, 0=disable Tx + * + * Enables/disables a virtual interface. Note that setting DCB Enable + * only makes sense when enabling a Virtual Interface ... + */ +int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid, + bool rx_en, bool tx_en) +{ + return t4_enable_vi_params(adap, mbox, viid, rx_en, tx_en, 0); +} + +/** + * t4_iq_start_stop - enable/disable an ingress queue and its FLs + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @start: %true to enable the queues, %false to disable them + * @pf: the PF owning the queues + * @vf: the VF owning the queues + * @iqid: ingress queue id + * @fl0id: FL0 queue id or 0xffff if no attached FL0 + * @fl1id: FL1 queue id or 0xffff if no attached FL1 + * + * Starts or stops an ingress queue and its associated FLs, if any. + */ +int t4_iq_start_stop(struct adapter *adap, unsigned int mbox, bool start, + unsigned int pf, unsigned int vf, unsigned int iqid, + unsigned int fl0id, unsigned int fl1id) +{ + struct fw_iq_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_IQ_CMD_PFN(pf) | + V_FW_IQ_CMD_VFN(vf)); + c.alloc_to_len16 = cpu_to_be32(V_FW_IQ_CMD_IQSTART(start) | + V_FW_IQ_CMD_IQSTOP(!start) | + FW_LEN16(c)); + c.iqid = cpu_to_be16(iqid); + c.fl0id = cpu_to_be16(fl0id); + c.fl1id = cpu_to_be16(fl1id); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_iq_free - free an ingress queue and its FLs + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queues + * @vf: the VF owning the queues + * @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.) + * @iqid: ingress queue id + * @fl0id: FL0 queue id or 0xffff if no attached FL0 + * @fl1id: FL1 queue id or 0xffff if no attached FL1 + * + * Frees an ingress queue and its associated FLs, if any. + */ +int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int iqtype, unsigned int iqid, + unsigned int fl0id, unsigned int fl1id) +{ + struct fw_iq_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_IQ_CMD_PFN(pf) | + V_FW_IQ_CMD_VFN(vf)); + c.alloc_to_len16 = cpu_to_be32(F_FW_IQ_CMD_FREE | FW_LEN16(c)); + c.type_to_iqandstindex = cpu_to_be32(V_FW_IQ_CMD_TYPE(iqtype)); + c.iqid = cpu_to_be16(iqid); + c.fl0id = cpu_to_be16(fl0id); + c.fl1id = cpu_to_be16(fl1id); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_eth_eq_free - free an Ethernet egress queue + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queue + * @vf: the VF owning the queue + * @eqid: egress queue id + * + * Frees an Ethernet egress queue. + */ +int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int eqid) +{ + struct fw_eq_eth_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = cpu_to_be32(V_FW_CMD_OP(FW_EQ_ETH_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_EXEC | + V_FW_EQ_ETH_CMD_PFN(pf) | + V_FW_EQ_ETH_CMD_VFN(vf)); + c.alloc_to_len16 = cpu_to_be32(F_FW_EQ_ETH_CMD_FREE | FW_LEN16(c)); + c.eqid_pkd = cpu_to_be32(V_FW_EQ_ETH_CMD_EQID(eqid)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_handle_fw_rpl - process a FW reply message + * @adap: the adapter + * @rpl: start of the FW message + * + * Processes a FW message, such as link state change messages. + */ +int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl) +{ + u8 opcode = *(const u8 *)rpl; + + /* + * This might be a port command ... this simplifies the following + * conditionals ... We can get away with pre-dereferencing + * action_to_len16 because it's in the first 16 bytes and all messages + * will be at least that long. + */ + const struct fw_port_cmd *p = (const void *)rpl; + unsigned int action = + G_FW_PORT_CMD_ACTION(be32_to_cpu(p->action_to_len16)); + + if (opcode == FW_PORT_CMD && action == FW_PORT_ACTION_GET_PORT_INFO) { + /* link/module state change message */ + int speed = 0, fc = 0, i; + int chan = G_FW_PORT_CMD_PORTID(be32_to_cpu(p->op_to_portid)); + struct port_info *pi = NULL; + struct link_config *lc; + u32 stat = be32_to_cpu(p->u.info.lstatus_to_modtype); + int link_ok = (stat & F_FW_PORT_CMD_LSTATUS) != 0; + u32 mod = G_FW_PORT_CMD_MODTYPE(stat); + + if (stat & F_FW_PORT_CMD_RXPAUSE) + fc |= PAUSE_RX; + if (stat & F_FW_PORT_CMD_TXPAUSE) + fc |= PAUSE_TX; + if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M)) + speed = ETH_SPEED_NUM_100M; + else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G)) + speed = ETH_SPEED_NUM_1G; + else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G)) + speed = ETH_SPEED_NUM_10G; + else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G)) + speed = ETH_SPEED_NUM_40G; + + for_each_port(adap, i) { + pi = adap2pinfo(adap, i); + if (pi->tx_chan == chan) + break; + } + lc = &pi->link_cfg; + + if (mod != pi->mod_type) { + pi->mod_type = mod; + t4_os_portmod_changed(adap, i); + } + if (link_ok != lc->link_ok || speed != lc->speed || + fc != lc->fc) { /* something changed */ + if (!link_ok && lc->link_ok) { + static const char * const reason[] = { + "Link Down", + "Remote Fault", + "Auto-negotiation Failure", + "Reserved", + "Insufficient Airflow", + "Unable To Determine Reason", + "No RX Signal Detected", + "Reserved", + }; + unsigned int rc = G_FW_PORT_CMD_LINKDNRC(stat); + + dev_warn(adap, "Port %d link down, reason: %s\n", + chan, reason[rc]); + } + lc->link_ok = link_ok; + lc->speed = speed; + lc->fc = fc; + lc->supported = be16_to_cpu(p->u.info.pcap); + } + } else { + dev_warn(adap, "Unknown firmware reply %d\n", opcode); + return -EINVAL; + } + return 0; +} + +void t4_reset_link_config(struct adapter *adap, int idx) +{ + struct port_info *pi = adap2pinfo(adap, idx); + struct link_config *lc = &pi->link_cfg; + + lc->link_ok = 0; + lc->requested_speed = 0; + lc->requested_fc = 0; + lc->speed = 0; + lc->fc = 0; +} + +/** + * init_link_config - initialize a link's SW state + * @lc: structure holding the link state + * @caps: link capabilities + * + * Initializes the SW state maintained for each link, including the link's + * capabilities and default speed/flow-control/autonegotiation settings. + */ +static void init_link_config(struct link_config *lc, + unsigned int caps) +{ + lc->supported = caps; + lc->requested_speed = 0; + lc->speed = 0; + lc->requested_fc = 0; + lc->fc = 0; + if (lc->supported & FW_PORT_CAP_ANEG) { + lc->advertising = lc->supported & ADVERT_MASK; + lc->autoneg = AUTONEG_ENABLE; + } else { + lc->advertising = 0; + lc->autoneg = AUTONEG_DISABLE; + } +} + +/** + * t4_wait_dev_ready - wait till to reads of registers work + * + * Right after the device is RESET is can take a small amount of time + * for it to respond to register reads. Until then, all reads will + * return either 0xff...ff or 0xee...ee. Return an error if reads + * don't work within a reasonable time frame. + */ +static int t4_wait_dev_ready(struct adapter *adapter) +{ + u32 whoami; + + whoami = t4_read_reg(adapter, A_PL_WHOAMI); + + if (whoami != 0xffffffff && whoami != X_CIM_PF_NOACCESS) + return 0; + + msleep(500); + whoami = t4_read_reg(adapter, A_PL_WHOAMI); + return (whoami != 0xffffffff && whoami != X_CIM_PF_NOACCESS + ? 0 : -EIO); +} + +struct flash_desc { + u32 vendor_and_model_id; + u32 size_mb; +}; + +int t4_get_flash_params(struct adapter *adapter) +{ + /* + * Table for non-Numonix supported flash parts. Numonix parts are left + * to the preexisting well-tested code. All flash parts have 64KB + * sectors. + */ + static struct flash_desc supported_flash[] = { + { 0x150201, 4 << 20 }, /* Spansion 4MB S25FL032P */ + }; + + int ret; + unsigned int i; + u32 info = 0; + + ret = sf1_write(adapter, 1, 1, 0, SF_RD_ID); + if (!ret) + ret = sf1_read(adapter, 3, 0, 1, &info); + t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */ + if (ret < 0) + return ret; + + for (i = 0; i < ARRAY_SIZE(supported_flash); ++i) + if (supported_flash[i].vendor_and_model_id == info) { + adapter->params.sf_size = supported_flash[i].size_mb; + adapter->params.sf_nsec = + adapter->params.sf_size / SF_SEC_SIZE; + return 0; + } + + if ((info & 0xff) != 0x20) /* not a Numonix flash */ + return -EINVAL; + info >>= 16; /* log2 of size */ + if (info >= 0x14 && info < 0x18) + adapter->params.sf_nsec = 1 << (info - 16); + else if (info == 0x18) + adapter->params.sf_nsec = 64; + else + return -EINVAL; + adapter->params.sf_size = 1 << info; + + /* + * We should reject adapters with FLASHes which are too small. So, emit + * a warning. + */ + if (adapter->params.sf_size < FLASH_MIN_SIZE) { + dev_warn(adapter, "WARNING!!! FLASH size %#x < %#x!!!\n", + adapter->params.sf_size, FLASH_MIN_SIZE); + } + + return 0; +} + +/** + * t4_prep_adapter - prepare SW and HW for operation + * @adapter: the adapter + * + * Initialize adapter SW state for the various HW modules, set initial + * values for some adapter tunables, take PHYs out of reset, and + * initialize the MDIO interface. + */ +int t4_prep_adapter(struct adapter *adapter) +{ + int ret, ver; + u32 pl_rev; + + ret = t4_wait_dev_ready(adapter); + if (ret < 0) + return ret; + + pl_rev = G_REV(t4_read_reg(adapter, A_PL_REV)); + adapter->params.pci.device_id = adapter->pdev->id.device_id; + adapter->params.pci.vendor_id = adapter->pdev->id.vendor_id; + + /* + * WE DON'T NEED adapter->params.chip CODE ONCE PL_REV CONTAINS + * ADAPTER (VERSION << 4 | REVISION) + */ + ver = CHELSIO_PCI_ID_VER(adapter->params.pci.device_id); + adapter->params.chip = 0; + switch (ver) { + case CHELSIO_T5: + adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev); + adapter->params.arch.sge_fl_db = F_DBPRIO | F_DBTYPE; + adapter->params.arch.mps_tcam_size = + NUM_MPS_T5_CLS_SRAM_L_INSTANCES; + adapter->params.arch.mps_rplc_size = 128; + adapter->params.arch.nchan = NCHAN; + adapter->params.arch.vfcount = 128; + break; + default: + dev_err(adapter, "%s: Device %d is not supported\n", + __func__, adapter->params.pci.device_id); + return -EINVAL; + } + + ret = t4_get_flash_params(adapter); + if (ret < 0) + return ret; + + adapter->params.cim_la_size = CIMLA_SIZE; + + init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd); + + /* + * Default port and clock for debugging in case we can't reach FW. + */ + adapter->params.nports = 1; + adapter->params.portvec = 1; + adapter->params.vpd.cclk = 50000; + + return 0; +} + +/** + * t4_bar2_sge_qregs - return BAR2 SGE Queue register information + * @adapter: the adapter + * @qid: the Queue ID + * @qtype: the Ingress or Egress type for @qid + * @pbar2_qoffset: BAR2 Queue Offset + * @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues + * + * Returns the BAR2 SGE Queue Registers information associated with the + * indicated Absolute Queue ID. These are passed back in return value + * pointers. @qtype should be T4_BAR2_QTYPE_EGRESS for Egress Queue + * and T4_BAR2_QTYPE_INGRESS for Ingress Queues. + * + * This may return an error which indicates that BAR2 SGE Queue + * registers aren't available. If an error is not returned, then the + * following values are returned: + * + * *@pbar2_qoffset: the BAR2 Offset of the @qid Registers + * *@pbar2_qid: the BAR2 SGE Queue ID or 0 of @qid + * + * If the returned BAR2 Queue ID is 0, then BAR2 SGE registers which + * require the "Inferred Queue ID" ability may be used. E.g. the + * Write Combining Doorbell Buffer. If the BAR2 Queue ID is not 0, + * then these "Inferred Queue ID" register may not be used. + */ +int t4_bar2_sge_qregs(struct adapter *adapter, unsigned int qid, + enum t4_bar2_qtype qtype, u64 *pbar2_qoffset, + unsigned int *pbar2_qid) +{ + unsigned int page_shift, page_size, qpp_shift, qpp_mask; + u64 bar2_page_offset, bar2_qoffset; + unsigned int bar2_qid, bar2_qid_offset, bar2_qinferred; + + /* + * T4 doesn't support BAR2 SGE Queue registers. + */ + if (is_t4(adapter->params.chip)) + return -EINVAL; + + /* + * Get our SGE Page Size parameters. + */ + page_shift = adapter->params.sge.hps + 10; + page_size = 1 << page_shift; + + /* + * Get the right Queues per Page parameters for our Queue. + */ + qpp_shift = (qtype == T4_BAR2_QTYPE_EGRESS ? + adapter->params.sge.eq_qpp : + adapter->params.sge.iq_qpp); + qpp_mask = (1 << qpp_shift) - 1; + + /* + * Calculate the basics of the BAR2 SGE Queue register area: + * o The BAR2 page the Queue registers will be in. + * o The BAR2 Queue ID. + * o The BAR2 Queue ID Offset into the BAR2 page. + */ + bar2_page_offset = ((qid >> qpp_shift) << page_shift); + bar2_qid = qid & qpp_mask; + bar2_qid_offset = bar2_qid * SGE_UDB_SIZE; + + /* + * If the BAR2 Queue ID Offset is less than the Page Size, then the + * hardware will infer the Absolute Queue ID simply from the writes to + * the BAR2 Queue ID Offset within the BAR2 Page (and we need to use a + * BAR2 Queue ID of 0 for those writes). Otherwise, we'll simply + * write to the first BAR2 SGE Queue Area within the BAR2 Page with + * the BAR2 Queue ID and the hardware will infer the Absolute Queue ID + * from the BAR2 Page and BAR2 Queue ID. + * + * One important censequence of this is that some BAR2 SGE registers + * have a "Queue ID" field and we can write the BAR2 SGE Queue ID + * there. But other registers synthesize the SGE Queue ID purely + * from the writes to the registers -- the Write Combined Doorbell + * Buffer is a good example. These BAR2 SGE Registers are only + * available for those BAR2 SGE Register areas where the SGE Absolute + * Queue ID can be inferred from simple writes. + */ + bar2_qoffset = bar2_page_offset; + bar2_qinferred = (bar2_qid_offset < page_size); + if (bar2_qinferred) { + bar2_qoffset += bar2_qid_offset; + bar2_qid = 0; + } + + *pbar2_qoffset = bar2_qoffset; + *pbar2_qid = bar2_qid; + return 0; +} + +/** + * t4_init_sge_params - initialize adap->params.sge + * @adapter: the adapter + * + * Initialize various fields of the adapter's SGE Parameters structure. + */ +int t4_init_sge_params(struct adapter *adapter) +{ + struct sge_params *sge_params = &adapter->params.sge; + u32 hps, qpp; + unsigned int s_hps, s_qpp; + + /* + * Extract the SGE Page Size for our PF. + */ + hps = t4_read_reg(adapter, A_SGE_HOST_PAGE_SIZE); + s_hps = (S_HOSTPAGESIZEPF0 + (S_HOSTPAGESIZEPF1 - S_HOSTPAGESIZEPF0) * + adapter->pf); + sge_params->hps = ((hps >> s_hps) & M_HOSTPAGESIZEPF0); + + /* + * Extract the SGE Egress and Ingess Queues Per Page for our PF. + */ + s_qpp = (S_QUEUESPERPAGEPF0 + + (S_QUEUESPERPAGEPF1 - S_QUEUESPERPAGEPF0) * adapter->pf); + qpp = t4_read_reg(adapter, A_SGE_EGRESS_QUEUES_PER_PAGE_PF); + sge_params->eq_qpp = ((qpp >> s_qpp) & M_QUEUESPERPAGEPF0); + qpp = t4_read_reg(adapter, A_SGE_INGRESS_QUEUES_PER_PAGE_PF); + sge_params->iq_qpp = ((qpp >> s_qpp) & M_QUEUESPERPAGEPF0); + + return 0; +} + +/** + * t4_init_tp_params - initialize adap->params.tp + * @adap: the adapter + * + * Initialize various fields of the adapter's TP Parameters structure. + */ +int t4_init_tp_params(struct adapter *adap) +{ + int chan; + u32 v; + + v = t4_read_reg(adap, A_TP_TIMER_RESOLUTION); + adap->params.tp.tre = G_TIMERRESOLUTION(v); + adap->params.tp.dack_re = G_DELAYEDACKRESOLUTION(v); + + /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */ + for (chan = 0; chan < NCHAN; chan++) + adap->params.tp.tx_modq[chan] = chan; + + /* + * Cache the adapter's Compressed Filter Mode and global Incress + * Configuration. + */ + t4_read_indirect(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA, + &adap->params.tp.vlan_pri_map, 1, A_TP_VLAN_PRI_MAP); + t4_read_indirect(adap, A_TP_PIO_ADDR, A_TP_PIO_DATA, + &adap->params.tp.ingress_config, 1, + A_TP_INGRESS_CONFIG); + + /* + * Now that we have TP_VLAN_PRI_MAP cached, we can calculate the field + * shift positions of several elements of the Compressed Filter Tuple + * for this adapter which we need frequently ... + */ + adap->params.tp.vlan_shift = t4_filter_field_shift(adap, F_VLAN); + adap->params.tp.vnic_shift = t4_filter_field_shift(adap, F_VNIC_ID); + adap->params.tp.port_shift = t4_filter_field_shift(adap, F_PORT); + adap->params.tp.protocol_shift = t4_filter_field_shift(adap, + F_PROTOCOL); + + /* + * If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID + * represents the presense of an Outer VLAN instead of a VNIC ID. + */ + if ((adap->params.tp.ingress_config & F_VNIC) == 0) + adap->params.tp.vnic_shift = -1; + + return 0; +} + +/** + * t4_filter_field_shift - calculate filter field shift + * @adap: the adapter + * @filter_sel: the desired field (from TP_VLAN_PRI_MAP bits) + * + * Return the shift position of a filter field within the Compressed + * Filter Tuple. The filter field is specified via its selection bit + * within TP_VLAN_PRI_MAL (filter mode). E.g. F_VLAN. + */ +int t4_filter_field_shift(const struct adapter *adap, unsigned int filter_sel) +{ + unsigned int filter_mode = adap->params.tp.vlan_pri_map; + unsigned int sel; + int field_shift; + + if ((filter_mode & filter_sel) == 0) + return -1; + + for (sel = 1, field_shift = 0; sel < filter_sel; sel <<= 1) { + switch (filter_mode & sel) { + case F_FCOE: + field_shift += W_FT_FCOE; + break; + case F_PORT: + field_shift += W_FT_PORT; + break; + case F_VNIC_ID: + field_shift += W_FT_VNIC_ID; + break; + case F_VLAN: + field_shift += W_FT_VLAN; + break; + case F_TOS: + field_shift += W_FT_TOS; + break; + case F_PROTOCOL: + field_shift += W_FT_PROTOCOL; + break; + case F_ETHERTYPE: + field_shift += W_FT_ETHERTYPE; + break; + case F_MACMATCH: + field_shift += W_FT_MACMATCH; + break; + case F_MPSHITTYPE: + field_shift += W_FT_MPSHITTYPE; + break; + case F_FRAGMENTATION: + field_shift += W_FT_FRAGMENTATION; + break; + } + } + return field_shift; +} + +int t4_init_rss_mode(struct adapter *adap, int mbox) +{ + int i, ret; + struct fw_rss_vi_config_cmd rvc; + + memset(&rvc, 0, sizeof(rvc)); + + for_each_port(adap, i) { + struct port_info *p = adap2pinfo(adap, i); + + rvc.op_to_viid = htonl(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_READ | + V_FW_RSS_VI_CONFIG_CMD_VIID(p->viid)); + rvc.retval_len16 = htonl(FW_LEN16(rvc)); + ret = t4_wr_mbox(adap, mbox, &rvc, sizeof(rvc), &rvc); + if (ret) + return ret; + p->rss_mode = ntohl(rvc.u.basicvirtual.defaultq_to_udpen); + } + return 0; +} + +int t4_port_init(struct adapter *adap, int mbox, int pf, int vf) +{ + u8 addr[6]; + int ret, i, j = 0; + struct fw_port_cmd c; + + memset(&c, 0, sizeof(c)); + + for_each_port(adap, i) { + unsigned int rss_size = 0; + struct port_info *p = adap2pinfo(adap, i); + + while ((adap->params.portvec & (1 << j)) == 0) + j++; + + c.op_to_portid = cpu_to_be32(V_FW_CMD_OP(FW_PORT_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_READ | + V_FW_PORT_CMD_PORTID(j)); + c.action_to_len16 = cpu_to_be32(V_FW_PORT_CMD_ACTION( + FW_PORT_ACTION_GET_PORT_INFO) | + FW_LEN16(c)); + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret) + return ret; + + ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size); + if (ret < 0) + return ret; + + p->viid = ret; + p->tx_chan = j; + p->rss_size = rss_size; + t4_os_set_hw_addr(adap, i, addr); + + ret = be32_to_cpu(c.u.info.lstatus_to_modtype); + p->mdio_addr = (ret & F_FW_PORT_CMD_MDIOCAP) ? + G_FW_PORT_CMD_MDIOADDR(ret) : -1; + p->port_type = G_FW_PORT_CMD_PTYPE(ret); + p->mod_type = FW_PORT_MOD_TYPE_NA; + + init_link_config(&p->link_cfg, be16_to_cpu(c.u.info.pcap)); + j++; + } + return 0; +} |