summaryrefslogtreecommitdiffstats
path: root/drivers/net/fm10k/base/fm10k_pf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/fm10k/base/fm10k_pf.c')
-rw-r--r--drivers/net/fm10k/base/fm10k_pf.c140
1 files changed, 83 insertions, 57 deletions
diff --git a/drivers/net/fm10k/base/fm10k_pf.c b/drivers/net/fm10k/base/fm10k_pf.c
index 105babf4..db5f4912 100644
--- a/drivers/net/fm10k/base/fm10k_pf.c
+++ b/drivers/net/fm10k/base/fm10k_pf.c
@@ -66,21 +66,21 @@ STATIC s32 fm10k_reset_hw_pf(struct fm10k_hw *hw)
/* shut down all rings */
err = fm10k_disable_queues_generic(hw, FM10K_MAX_QUEUES);
- if (err)
+ if (err == FM10K_ERR_REQUESTS_PENDING) {
+ hw->mac.reset_while_pending++;
+ goto force_reset;
+ } else if (err) {
return err;
+ }
/* Verify that DMA is no longer active */
reg = FM10K_READ_REG(hw, FM10K_DMA_CTRL);
if (reg & (FM10K_DMA_CTRL_TX_ACTIVE | FM10K_DMA_CTRL_RX_ACTIVE))
return FM10K_ERR_DMA_PENDING;
- /* verify the switch is ready for reset */
- reg = FM10K_READ_REG(hw, FM10K_DMA_CTRL2);
- if (!(reg & FM10K_DMA_CTRL2_SWITCH_READY))
- goto out;
-
+force_reset:
/* Inititate data path reset */
- reg |= FM10K_DMA_CTRL_DATAPATH_RESET;
+ reg = FM10K_DMA_CTRL_DATAPATH_RESET;
FM10K_WRITE_REG(hw, FM10K_DMA_CTRL, reg);
/* Flush write and allow 100us for reset to complete */
@@ -90,10 +90,9 @@ STATIC s32 fm10k_reset_hw_pf(struct fm10k_hw *hw)
/* Verify we made it out of reset */
reg = FM10K_READ_REG(hw, FM10K_IP);
if (!(reg & FM10K_IP_NOTINRESET))
- err = FM10K_ERR_RESET_FAILED;
+ return FM10K_ERR_RESET_FAILED;
-out:
- return err;
+ return FM10K_SUCCESS;
}
/**
@@ -255,8 +254,8 @@ STATIC s32 fm10k_update_vlan_pf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set)
/* VLAN multi-bit write:
* The multi-bit write has several parts to it.
- * 3 2 1 0
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * 24 16 8 0
+ * 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | RSVD0 | Length |C|RSVD0| VLAN ID |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
@@ -412,7 +411,7 @@ STATIC s32 fm10k_update_uc_addr_pf(struct fm10k_hw *hw, u16 glort,
DEBUGFUNC("fm10k_update_uc_addr_pf");
/* verify MAC address is valid */
- if (!FM10K_IS_VALID_ETHER_ADDR(mac))
+ if (!IS_VALID_ETHER_ADDR(mac))
return FM10K_ERR_PARAM;
return fm10k_update_xc_addr_pf(hw, glort, mac, vid, add, flags);
@@ -435,7 +434,7 @@ STATIC s32 fm10k_update_mc_addr_pf(struct fm10k_hw *hw, u16 glort,
DEBUGFUNC("fm10k_update_mc_addr_pf");
/* verify multicast address is valid */
- if (!FM10K_IS_MULTICAST_ETHER_ADDR(mac))
+ if (!IS_MULTICAST_ETHER_ADDR(mac))
return FM10K_ERR_PARAM;
return fm10k_update_xc_addr_pf(hw, glort, mac, vid, add, 0);
@@ -536,6 +535,10 @@ STATIC s32 fm10k_update_lport_state_pf(struct fm10k_hw *hw, u16 glort,
if (!fm10k_glort_valid_pf(hw, glort))
return FM10K_ERR_PARAM;
+ /* reset multicast mode if deleting lport */
+ if (!enable)
+ fm10k_update_xcast_mode_pf(hw, glort, FM10K_XCAST_MODE_NONE);
+
/* construct the lport message from the 2 pieces of data we have */
lport_msg = ((u32)count << 16) | glort;
@@ -908,13 +911,13 @@ STATIC s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw,
vf_q_idx = fm10k_vf_queue_index(hw, vf_idx);
qmap_idx = qmap_stride * vf_idx;
- /* MAP Tx queue back to 0 temporarily, and disable it */
- FM10K_WRITE_REG(hw, FM10K_TQMAP(qmap_idx), 0);
- FM10K_WRITE_REG(hw, FM10K_TXDCTL(vf_q_idx), 0);
-
- /* determine correct default VLAN ID */
+ /* Determine correct default VLAN ID. The FM10K_VLAN_OVERRIDE bit is
+ * used here to indicate to the VF that it will not have privilege to
+ * write VLAN_TABLE. All policy is enforced on the PF but this allows
+ * the VF to correctly report errors to userspace rqeuests.
+ */
if (vf_info->pf_vid)
- vf_vid = vf_info->pf_vid | FM10K_VLAN_CLEAR;
+ vf_vid = vf_info->pf_vid | FM10K_VLAN_OVERRIDE;
else
vf_vid = vf_info->sw_vid;
@@ -923,9 +926,35 @@ STATIC s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw,
fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_DEFAULT_MAC,
vf_info->mac, vf_vid);
- /* load onto outgoing mailbox, ignore any errors on enqueue */
- if (vf_info->mbx.ops.enqueue_tx)
- vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg);
+ /* Configure Queue control register with new VLAN ID. The TXQCTL
+ * register is RO from the VF, so the PF must do this even in the
+ * case of notifying the VF of a new VID via the mailbox.
+ */
+ txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) &
+ FM10K_TXQCTL_VID_MASK;
+ txqctl |= (vf_idx << FM10K_TXQCTL_TC_SHIFT) |
+ FM10K_TXQCTL_VF | vf_idx;
+
+ for (i = 0; i < queues_per_pool; i++)
+ FM10K_WRITE_REG(hw, FM10K_TXQCTL(vf_q_idx + i), txqctl);
+
+ /* try loading a message onto outgoing mailbox first */
+ if (vf_info->mbx.ops.enqueue_tx) {
+ err = vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg);
+ if (err != FM10K_MBX_ERR_NO_MBX)
+ return err;
+ err = FM10K_SUCCESS;
+ }
+
+ /* If we aren't connected to a mailbox, this is most likely because
+ * the VF driver is not running. It should thus be safe to re-map
+ * queues and use the registers to pass the MAC address so that the VF
+ * driver gets correct information during its initialization.
+ */
+
+ /* MAP Tx queue back to 0 temporarily, and disable it */
+ FM10K_WRITE_REG(hw, FM10K_TQMAP(qmap_idx), 0);
+ FM10K_WRITE_REG(hw, FM10K_TXDCTL(vf_q_idx), 0);
/* verify ring has disabled before modifying base address registers */
txdctl = FM10K_READ_REG(hw, FM10K_TXDCTL(vf_q_idx));
@@ -941,7 +970,7 @@ STATIC s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw,
}
/* Update base address registers to contain MAC address */
- if (FM10K_IS_VALID_ETHER_ADDR(vf_info->mac)) {
+ if (IS_VALID_ETHER_ADDR(vf_info->mac)) {
tdbal = (((u32)vf_info->mac[3]) << 24) |
(((u32)vf_info->mac[4]) << 16) |
(((u32)vf_info->mac[5]) << 8);
@@ -964,16 +993,6 @@ STATIC s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw,
FM10K_TDLEN_ITR_SCALE_SHIFT);
err_out:
- /* configure Queue control register */
- txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) &
- FM10K_TXQCTL_VID_MASK;
- txqctl |= (vf_idx << FM10K_TXQCTL_TC_SHIFT) |
- FM10K_TXQCTL_VF | vf_idx;
-
- /* assign VLAN ID */
- for (i = 0; i < queues_per_pool; i++)
- FM10K_WRITE_REG(hw, FM10K_TXQCTL(vf_q_idx + i), txqctl);
-
/* restore the queue back to VF ownership */
FM10K_WRITE_REG(hw, FM10K_TQMAP(qmap_idx), vf_q_idx);
return err;
@@ -1081,7 +1100,7 @@ STATIC s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw,
FM10K_WRITE_REG(hw, FM10K_MRQC(vf_info->vsi), 0);
/* Update base address registers to contain MAC address */
- if (FM10K_IS_VALID_ETHER_ADDR(vf_info->mac)) {
+ if (IS_VALID_ETHER_ADDR(vf_info->mac)) {
tdbal = (((u32)vf_info->mac[3]) << 24) |
(((u32)vf_info->mac[4]) << 16) |
(((u32)vf_info->mac[5]) << 8);
@@ -1267,18 +1286,32 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
if (err)
return err;
- /* verify upper 16 bits are zero */
- if (vid >> 16)
- return FM10K_ERR_PARAM;
-
set = !(vid & FM10K_VLAN_CLEAR);
vid &= ~FM10K_VLAN_CLEAR;
- err = fm10k_iov_select_vid(vf_info, (u16)vid);
- if (err < 0)
- return err;
+ /* if the length field has been set, this is a multi-bit
+ * update request. For multi-bit requests, simply disallow
+ * them when the pf_vid has been set. In this case, the PF
+ * should have already cleared the VLAN_TABLE, and if we
+ * allowed them, it could allow a rogue VF to receive traffic
+ * on a VLAN it was not assigned. In the single-bit case, we
+ * need to modify requests for VLAN 0 to use the default PF or
+ * SW vid when assigned.
+ */
- vid = err;
+ if (vid >> 16) {
+ /* prevent multi-bit requests when PF has
+ * administratively set the VLAN for this VF
+ */
+ if (vf_info->pf_vid)
+ return FM10K_ERR_PARAM;
+ } else {
+ err = fm10k_iov_select_vid(vf_info, (u16)vid);
+ if (err < 0)
+ return err;
+
+ vid = err;
+ }
/* update VSI info for VF in regards to VLAN table */
err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set);
@@ -1293,7 +1326,7 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
return err;
/* block attempts to set MAC for a locked device */
- if (FM10K_IS_VALID_ETHER_ADDR(vf_info->mac) &&
+ if (IS_VALID_ETHER_ADDR(vf_info->mac) &&
memcmp(mac, vf_info->mac, ETH_ALEN))
return FM10K_ERR_PARAM;
@@ -1670,13 +1703,12 @@ STATIC s32 fm10k_request_lport_map_pf(struct fm10k_hw *hw)
* @hw: pointer to hardware structure
* @switch_ready: pointer to boolean value that will record switch state
*
- * This funciton will check the DMA_CTRL2 register and mailbox in order
+ * This function will check the DMA_CTRL2 register and mailbox in order
* to determine if the switch is ready for the PF to begin requesting
* addresses and mapping traffic to the local interface.
**/
STATIC s32 fm10k_get_host_state_pf(struct fm10k_hw *hw, bool *switch_ready)
{
- s32 ret_val = FM10K_SUCCESS;
u32 dma_ctrl2;
DEBUGFUNC("fm10k_get_host_state_pf");
@@ -1684,23 +1716,16 @@ STATIC s32 fm10k_get_host_state_pf(struct fm10k_hw *hw, bool *switch_ready)
/* verify the switch is ready for interaction */
dma_ctrl2 = FM10K_READ_REG(hw, FM10K_DMA_CTRL2);
if (!(dma_ctrl2 & FM10K_DMA_CTRL2_SWITCH_READY))
- goto out;
+ return FM10K_SUCCESS;
/* retrieve generic host state info */
- ret_val = fm10k_get_host_state_generic(hw, switch_ready);
- if (ret_val)
- goto out;
-
- /* interface cannot receive traffic without logical ports */
- if (hw->mac.dglort_map == FM10K_DGLORTMAP_NONE)
- ret_val = fm10k_request_lport_map_pf(hw);
-
-out:
- return ret_val;
+ return fm10k_get_host_state_generic(hw, switch_ready);
}
/* This structure defines the attibutes to be parsed below */
const struct fm10k_tlv_attr fm10k_lport_map_msg_attr[] = {
+ FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_ERR,
+ sizeof(struct fm10k_swapi_error)),
FM10K_TLV_ATTR_U32(FM10K_PF_ATTR_ID_LPORT_MAP),
FM10K_TLV_ATTR_LAST
};
@@ -2082,6 +2107,7 @@ s32 fm10k_init_ops_pf(struct fm10k_hw *hw)
mac->ops.set_dma_mask = &fm10k_set_dma_mask_pf;
mac->ops.get_fault = &fm10k_get_fault_pf;
mac->ops.get_host_state = &fm10k_get_host_state_pf;
+ mac->ops.request_lport_map = &fm10k_request_lport_map_pf;
mac->ops.adjust_systime = &fm10k_adjust_systime_pf;
mac->ops.notify_offset = &fm10k_notify_offset_pf;
mac->ops.read_systime = &fm10k_read_systime_pf;