diff options
Diffstat (limited to 'drivers/net/ixgbe/base/ixgbe_82598.c')
| -rw-r--r-- | drivers/net/ixgbe/base/ixgbe_82598.c | 1436 |
1 files changed, 1436 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/base/ixgbe_82598.c b/drivers/net/ixgbe/base/ixgbe_82598.c new file mode 100644 index 00000000..9e65fffa --- /dev/null +++ b/drivers/net/ixgbe/base/ixgbe_82598.c @@ -0,0 +1,1436 @@ +/******************************************************************************* + +Copyright (c) 2001-2015, Intel Corporation +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +***************************************************************************/ + +#include "ixgbe_type.h" +#include "ixgbe_82598.h" +#include "ixgbe_api.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +#define IXGBE_82598_MAX_TX_QUEUES 32 +#define IXGBE_82598_MAX_RX_QUEUES 64 +#define IXGBE_82598_RAR_ENTRIES 16 +#define IXGBE_82598_MC_TBL_SIZE 128 +#define IXGBE_82598_VFT_TBL_SIZE 128 +#define IXGBE_82598_RX_PB_SIZE 512 + +STATIC s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg); +STATIC enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw); +STATIC s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete); +STATIC s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, bool *link_up, + bool link_up_wait_to_complete); +STATIC s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete); +STATIC s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete); +STATIC s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw); +STATIC s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +STATIC s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw); +STATIC void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, + u32 headroom, int strategy); +STATIC s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data); +/** + * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout + * @hw: pointer to the HW structure + * + * The defaults for 82598 should be in the range of 50us to 50ms, + * however the hardware default for these parts is 500us to 1ms which is less + * than the 10ms recommended by the pci-e spec. To address this we need to + * increase the value to either 10ms to 250ms for capability version 1 config, + * or 16ms to 55ms for version 2. + **/ +void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) +{ + u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR); + u16 pcie_devctl2; + + /* only take action if timeout value is defaulted to 0 */ + if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK) + goto out; + + /* + * if capababilities version is type 1 we can write the + * timeout of 10ms to 250ms through the GCR register + */ + if (!(gcr & IXGBE_GCR_CAP_VER2)) { + gcr |= IXGBE_GCR_CMPL_TMOUT_10ms; + goto out; + } + + /* + * for version 2 capabilities we need to write the config space + * directly in order to set the completion timeout value for + * 16ms to 55ms + */ + pcie_devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2); + pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms; + IXGBE_WRITE_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2); +out: + /* disable completion timeout resend */ + gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND; + IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr); +} + +/** + * ixgbe_init_ops_82598 - Inits func ptrs and MAC type + * @hw: pointer to hardware structure + * + * Initialize the function pointers and assign the MAC type for 82598. + * Does not touch the hardware. + **/ +s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val; + + DEBUGFUNC("ixgbe_init_ops_82598"); + + ret_val = ixgbe_init_phy_ops_generic(hw); + ret_val = ixgbe_init_ops_generic(hw); + + /* PHY */ + phy->ops.init = ixgbe_init_phy_ops_82598; + + /* MAC */ + mac->ops.start_hw = ixgbe_start_hw_82598; + mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_82598; + mac->ops.reset_hw = ixgbe_reset_hw_82598; + mac->ops.get_media_type = ixgbe_get_media_type_82598; + mac->ops.get_supported_physical_layer = + ixgbe_get_supported_physical_layer_82598; + mac->ops.read_analog_reg8 = ixgbe_read_analog_reg8_82598; + mac->ops.write_analog_reg8 = ixgbe_write_analog_reg8_82598; + mac->ops.set_lan_id = ixgbe_set_lan_id_multi_port_pcie_82598; + mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_82598; + + /* RAR, Multicast, VLAN */ + mac->ops.set_vmdq = ixgbe_set_vmdq_82598; + mac->ops.clear_vmdq = ixgbe_clear_vmdq_82598; + mac->ops.set_vfta = ixgbe_set_vfta_82598; + mac->ops.set_vlvf = NULL; + mac->ops.clear_vfta = ixgbe_clear_vfta_82598; + + /* Flow Control */ + mac->ops.fc_enable = ixgbe_fc_enable_82598; + + mac->mcft_size = IXGBE_82598_MC_TBL_SIZE; + mac->vft_size = IXGBE_82598_VFT_TBL_SIZE; + mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES; + mac->rx_pb_size = IXGBE_82598_RX_PB_SIZE; + mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES; + mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); + + /* SFP+ Module */ + phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_82598; + phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_82598; + + /* Link */ + mac->ops.check_link = ixgbe_check_mac_link_82598; + mac->ops.setup_link = ixgbe_setup_mac_link_82598; + mac->ops.flap_tx_laser = NULL; + mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_82598; + mac->ops.setup_rxpba = ixgbe_set_rxpba_82598; + + /* Manageability interface */ + mac->ops.set_fw_drv_ver = NULL; + + mac->ops.get_rtrup2tc = NULL; + + return ret_val; +} + +/** + * ixgbe_init_phy_ops_82598 - PHY/SFP specific init + * @hw: pointer to hardware structure + * + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. + * + **/ +s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val = IXGBE_SUCCESS; + u16 list_offset, data_offset; + + DEBUGFUNC("ixgbe_init_phy_ops_82598"); + + /* Identify the PHY */ + phy->ops.identify(hw); + + /* Overwrite the link function pointers if copper PHY */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { + mac->ops.setup_link = ixgbe_setup_copper_link_82598; + mac->ops.get_link_capabilities = + ixgbe_get_copper_link_capabilities_generic; + } + + switch (hw->phy.type) { + case ixgbe_phy_tn: + phy->ops.setup_link = ixgbe_setup_phy_link_tnx; + phy->ops.check_link = ixgbe_check_phy_link_tnx; + phy->ops.get_firmware_version = + ixgbe_get_phy_firmware_version_tnx; + break; + case ixgbe_phy_nl: + phy->ops.reset = ixgbe_reset_phy_nl; + + /* Call SFP+ identify routine to get the SFP+ module type */ + ret_val = phy->ops.identify_sfp(hw); + if (ret_val != IXGBE_SUCCESS) + goto out; + else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) { + ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + + /* Check to see if SFP+ module is supported */ + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, + &list_offset, + &data_offset); + if (ret_val != IXGBE_SUCCESS) { + ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + break; + default: + break; + } + +out: + return ret_val; +} + +/** + * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function. + * Disables relaxed ordering Then set pcie completion timeout + * + **/ +s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) +{ + u32 regval; + u32 i; + s32 ret_val = IXGBE_SUCCESS; + + DEBUGFUNC("ixgbe_start_hw_82598"); + + ret_val = ixgbe_start_hw_generic(hw); + if (ret_val) + return ret_val; + + /* Disable relaxed ordering */ + for (i = 0; ((i < hw->mac.max_tx_queues) && + (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); + regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); + } + + for (i = 0; ((i < hw->mac.max_rx_queues) && + (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | + IXGBE_DCA_RXCTRL_HEAD_WRO_EN); + IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); + } + + /* set the completion timeout for interface */ + ixgbe_set_pcie_completion_timeout(hw); + + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_82598 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value + * + * Determines the link capabilities by reading the AUTOC register. + **/ +STATIC s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + s32 status = IXGBE_SUCCESS; + u32 autoc = 0; + + DEBUGFUNC("ixgbe_get_link_capabilities_82598"); + + /* + * Determine link capabilities based on the stored value of AUTOC, + * which represents EEPROM defaults. If AUTOC value has not been + * stored, use the current register value. + */ + if (hw->mac.orig_link_settings_stored) + autoc = hw->mac.orig_autoc; + else + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = false; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *autoneg = false; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = true; + break; + + case IXGBE_AUTOC_LMS_KX4_AN: + case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = true; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + break; + } + + return status; +} + +/** + * ixgbe_get_media_type_82598 - Determines media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +STATIC enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + DEBUGFUNC("ixgbe_get_media_type_82598"); + + /* Detect if there is a copper PHY attached. */ + switch (hw->phy.type) { + case ixgbe_phy_cu_unknown: + case ixgbe_phy_tn: + media_type = ixgbe_media_type_copper; + goto out; + default: + break; + } + + /* Media type for I82598 is based on device ID */ + switch (hw->device_id) { + case IXGBE_DEV_ID_82598: + case IXGBE_DEV_ID_82598_BX: + /* Default device ID is mezzanine card KX/KX4 */ + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_82598AF_DUAL_PORT: + case IXGBE_DEV_ID_82598AF_SINGLE_PORT: + case IXGBE_DEV_ID_82598_DA_DUAL_PORT: + case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: + case IXGBE_DEV_ID_82598EB_XF_LR: + case IXGBE_DEV_ID_82598EB_SFP_LOM: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_82598EB_CX4: + case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: + media_type = ixgbe_media_type_cx4; + break; + case IXGBE_DEV_ID_82598AT: + case IXGBE_DEV_ID_82598AT2: + media_type = ixgbe_media_type_copper; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } +out: + return media_type; +} + +/** + * ixgbe_fc_enable_82598 - Enable flow control + * @hw: pointer to hardware structure + * + * Enable flow control according to the current settings. + **/ +s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw) +{ + s32 ret_val = IXGBE_SUCCESS; + u32 fctrl_reg; + u32 rmcs_reg; + u32 reg; + u32 fcrtl, fcrth; + u32 link_speed = 0; + int i; + bool link_up; + + DEBUGFUNC("ixgbe_fc_enable_82598"); + + /* Validate the water mark configuration */ + if (!hw->fc.pause_time) { + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* Low water mark of zero causes XOFF floods */ + for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { + if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && + hw->fc.high_water[i]) { + if (!hw->fc.low_water[i] || + hw->fc.low_water[i] >= hw->fc.high_water[i]) { + DEBUGOUT("Invalid water mark configuration\n"); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + } + } + + /* + * On 82598 having Rx FC on causes resets while doing 1G + * so if it's on turn it off once we know link_speed. For + * more details see 82598 Specification update. + */ + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) { + switch (hw->fc.requested_mode) { + case ixgbe_fc_full: + hw->fc.requested_mode = ixgbe_fc_tx_pause; + break; + case ixgbe_fc_rx_pause: + hw->fc.requested_mode = ixgbe_fc_none; + break; + default: + /* no change */ + break; + } + } + + /* Negotiate the fc mode to use */ + ixgbe_fc_autoneg(hw); + + /* Disable any previous flow control settings */ + fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE); + + rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS); + rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); + + /* + * The possible values of fc.current_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: Invalid. + */ + switch (hw->fc.current_mode) { + case ixgbe_fc_none: + /* + * Flow control is disabled by software override or autoneg. + * The code below will actually disable it in the HW. + */ + break; + case ixgbe_fc_rx_pause: + /* + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + fctrl_reg |= IXGBE_FCTRL_RFCE; + break; + case ixgbe_fc_tx_pause: + /* + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; + break; + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + fctrl_reg |= IXGBE_FCTRL_RFCE; + rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + ret_val = IXGBE_ERR_CONFIG; + goto out; + break; + } + + /* Set 802.3x based flow control settings. */ + fctrl_reg |= IXGBE_FCTRL_DPF; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg); + IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); + + /* Set up and enable Rx high/low water mark thresholds, enable XON. */ + for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { + if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && + hw->fc.high_water[i]) { + fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE; + fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN; + IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl); + IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth); + } else { + IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0); + } + + } + + /* Configure pause time (2 TCs per register) */ + reg = hw->fc.pause_time * 0x00010001; + for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++) + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); + + /* Configure flow control refresh threshold value */ + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); + +out: + return ret_val; +} + +/** + * ixgbe_start_mac_link_82598 - Configures MAC link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +STATIC s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete) +{ + u32 autoc_reg; + u32 links_reg; + u32 i; + s32 status = IXGBE_SUCCESS; + + DEBUGFUNC("ixgbe_start_mac_link_82598"); + + /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_AN || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { + links_reg = 0; /* Just in case Autoneg time = 0 */ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msec_delay(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + DEBUGOUT("Autonegotiation did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msec_delay(50); + + return status; +} + +/** + * ixgbe_validate_link_ready - Function looks for phy link + * @hw: pointer to hardware structure + * + * Function indicates success when phy link is available. If phy is not ready + * within 5 seconds of MAC indicating link, the function returns error. + **/ +STATIC s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) +{ + u32 timeout; + u16 an_reg; + + if (hw->device_id != IXGBE_DEV_ID_82598AT2) + return IXGBE_SUCCESS; + + for (timeout = 0; + timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) { + hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &an_reg); + + if ((an_reg & IXGBE_MII_AUTONEG_COMPLETE) && + (an_reg & IXGBE_MII_AUTONEG_LINK_UP)) + break; + + msec_delay(100); + } + + if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) { + DEBUGOUT("Link was indicated but link is down\n"); + return IXGBE_ERR_LINK_SETUP; + } + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_check_mac_link_82598 - Get link/speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true is link is up, false otherwise + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Reads the links register to determine if link is up and the current speed + **/ +STATIC s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, bool *link_up, + bool link_up_wait_to_complete) +{ + u32 links_reg; + u32 i; + u16 link_reg, adapt_comp_reg; + + DEBUGFUNC("ixgbe_check_mac_link_82598"); + + /* + * SERDES PHY requires us to read link status from undocumented + * register 0xC79F. Bit 0 set indicates link is up/ready; clear + * indicates link down. OxC00C is read to check that the XAUI lanes + * are active. Bit 0 clear indicates active; set indicates inactive. + */ + if (hw->phy.type == ixgbe_phy_nl) { + hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); + hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); + hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV, + &adapt_comp_reg); + if (link_up_wait_to_complete) { + for (i = 0; i < hw->mac.max_link_up_time; i++) { + if ((link_reg & 1) && + ((adapt_comp_reg & 1) == 0)) { + *link_up = true; + break; + } else { + *link_up = false; + } + msec_delay(100); + hw->phy.ops.read_reg(hw, 0xC79F, + IXGBE_TWINAX_DEV, + &link_reg); + hw->phy.ops.read_reg(hw, 0xC00C, + IXGBE_TWINAX_DEV, + &adapt_comp_reg); + } + } else { + if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0)) + *link_up = true; + else + *link_up = false; + } + + if (*link_up == false) + goto out; + } + + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (link_up_wait_to_complete) { + for (i = 0; i < hw->mac.max_link_up_time; i++) { + if (links_reg & IXGBE_LINKS_UP) { + *link_up = true; + break; + } else { + *link_up = false; + } + msec_delay(100); + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + } + } else { + if (links_reg & IXGBE_LINKS_UP) + *link_up = true; + else + *link_up = false; + } + + if (links_reg & IXGBE_LINKS_SPEED) + *speed = IXGBE_LINK_SPEED_10GB_FULL; + else + *speed = IXGBE_LINK_SPEED_1GB_FULL; + + if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == true) && + (ixgbe_validate_link_ready(hw) != IXGBE_SUCCESS)) + *link_up = false; + +out: + return IXGBE_SUCCESS; +} + +/** + * ixgbe_setup_mac_link_82598 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +STATIC s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) +{ + bool autoneg = false; + s32 status = IXGBE_SUCCESS; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc = curr_autoc; + u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + + DEBUGFUNC("ixgbe_setup_mac_link_82598"); + + /* Check to see if speed passed in is supported. */ + ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg); + speed &= link_capabilities; + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) + status = IXGBE_ERR_LINK_SETUP; + + /* Set KX4/KX support according to speed requested */ + else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { + autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK; + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + if (autoc != curr_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + } + + if (status == IXGBE_SUCCESS) { + /* + * Setup and restart the link based on the new values in + * ixgbe_hw This will write the AUTOC register based on the new + * stored values + */ + status = ixgbe_start_mac_link_82598(hw, + autoneg_wait_to_complete); + } + + return status; +} + + +/** + * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true if waiting is needed to complete + * + * Sets the link speed in the AUTOC register in the MAC and restarts link. + **/ +STATIC s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) +{ + s32 status; + + DEBUGFUNC("ixgbe_setup_copper_link_82598"); + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_link_speed(hw, speed, + autoneg_wait_to_complete); + /* Set up MAC */ + ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); + + return status; +} + +/** + * ixgbe_reset_hw_82598 - Performs hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks and + * clears all interrupts, performing a PHY reset, and performing a link (MAC) + * reset. + **/ +STATIC s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_SUCCESS; + s32 phy_status = IXGBE_SUCCESS; + u32 ctrl; + u32 gheccr; + u32 i; + u32 autoc; + u8 analog_val; + + DEBUGFUNC("ixgbe_reset_hw_82598"); + + /* Call adapter stop to disable tx/rx and clear interrupts */ + status = hw->mac.ops.stop_adapter(hw); + if (status != IXGBE_SUCCESS) + goto reset_hw_out; + + /* + * Power up the Atlas Tx lanes if they are currently powered down. + * Atlas Tx lanes are powered down for MAC loopback tests, but + * they are not automatically restored on reset. + */ + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val); + if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) { + /* Enable Tx Atlas so packets can be transmitted again */ + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, + analog_val); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, + analog_val); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, + analog_val); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, + analog_val); + } + + /* Reset PHY */ + if (hw->phy.reset_disable == false) { + /* PHY ops must be identified and initialized prior to reset */ + + /* Init PHY and function pointers, perform SFP setup */ + phy_status = hw->phy.ops.init(hw); + if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT) + goto mac_reset_top; + + hw->phy.ops.reset(hw); + } + +mac_reset_top: + /* + * Issue global reset to the MAC. This needs to be a SW reset. + * If link reset is used, it might reset the MAC when mng is using it + */ + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST; + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + usec_delay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST)) + break; + } + if (ctrl & IXGBE_CTRL_RST) { + status = IXGBE_ERR_RESET_FAILED; + DEBUGOUT("Reset polling failed to complete.\n"); + } + + msec_delay(50); + + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR); + gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6)); + IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr); + + /* + * Store the original AUTOC value if it has not been + * stored off yet. Otherwise restore the stored original + * AUTOC value since the reset operation sets back to deaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + if (hw->mac.orig_link_settings_stored == false) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_link_settings_stored = true; + } else if (autoc != hw->mac.orig_autoc) { + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc); + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table + */ + hw->mac.ops.init_rx_addrs(hw); + +reset_hw_out: + if (phy_status != IXGBE_SUCCESS) + status = phy_status; + + return status; +} + +/** + * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq set index + **/ +s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + DEBUGFUNC("ixgbe_set_vmdq_82598"); + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + DEBUGOUT1("RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); + rar_high &= ~IXGBE_RAH_VIND_MASK; + rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK); + IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); + return IXGBE_SUCCESS; +} + +/** + * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq clear index (not used in 82598, but elsewhere) + **/ +STATIC s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + UNREFERENCED_1PARAMETER(vmdq); + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + DEBUGOUT1("RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); + if (rar_high & IXGBE_RAH_VIND_MASK) { + rar_high &= ~IXGBE_RAH_VIND_MASK; + IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); + } + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_set_vfta_82598 - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFTA + * @vlan_on: boolean flag to turn on/off VLAN in VFTA + * + * Turn on/off specified VLAN in the VLAN filter table. + **/ +s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on) +{ + u32 regindex; + u32 bitindex; + u32 bits; + u32 vftabyte; + + DEBUGFUNC("ixgbe_set_vfta_82598"); + + if (vlan > 4095) + return IXGBE_ERR_PARAM; + + /* Determine 32-bit word position in array */ + regindex = (vlan >> 5) & 0x7F; /* upper seven bits */ + + /* Determine the location of the (VMD) queue index */ + vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */ + bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */ + + /* Set the nibble for VMD queue index */ + bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex)); + bits &= (~(0x0F << bitindex)); + bits |= (vind << bitindex); + IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits); + + /* Determine the location of the bit for this VLAN id */ + bitindex = vlan & 0x1F; /* lower five bits */ + + bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); + if (vlan_on) + /* Turn on this VLAN id */ + bits |= (1 << bitindex); + else + /* Turn off this VLAN id */ + bits &= ~(1 << bitindex); + IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_clear_vfta_82598 - Clear VLAN filter table + * @hw: pointer to hardware structure + * + * Clears the VLAN filer table, and the VMDq index associated with the filter + **/ +STATIC s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) +{ + u32 offset; + u32 vlanbyte; + + DEBUGFUNC("ixgbe_clear_vfta_82598"); + + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); + + for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), + 0); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value + * + * Performs read operation to Atlas analog register specified. + **/ +s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) +{ + u32 atlas_ctl; + + DEBUGFUNC("ixgbe_read_analog_reg8_82598"); + + IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, + IXGBE_ATLASCTL_WRITE_CMD | (reg << 8)); + IXGBE_WRITE_FLUSH(hw); + usec_delay(10); + atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); + *val = (u8)atlas_ctl; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write + * + * Performs write operation to Atlas analog register specified. + **/ +s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) +{ + u32 atlas_ctl; + + DEBUGFUNC("ixgbe_write_analog_reg8_82598"); + + atlas_ctl = (reg << 8) | val; + IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl); + IXGBE_WRITE_FLUSH(hw); + usec_delay(10); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @dev_addr: address to read from + * @byte_offset: byte offset to read from dev_addr + * @eeprom_data: value read + * + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + **/ +STATIC s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, + u8 byte_offset, u8 *eeprom_data) +{ + s32 status = IXGBE_SUCCESS; + u16 sfp_addr = 0; + u16 sfp_data = 0; + u16 sfp_stat = 0; + u16 gssr; + u32 i; + + DEBUGFUNC("ixgbe_read_i2c_phy_82598"); + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS) + return IXGBE_ERR_SWFW_SYNC; + + if (hw->phy.type == ixgbe_phy_nl) { + /* + * NetLogic phy SDA/SCL registers are at addresses 0xC30A to + * 0xC30D. These registers are used to talk to the SFP+ + * module's EEPROM through the SDA/SCL (I2C) interface. + */ + sfp_addr = (dev_addr << 8) + byte_offset; + sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); + hw->phy.ops.write_reg_mdi(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + sfp_addr); + + /* Poll status */ + for (i = 0; i < 100; i++) { + hw->phy.ops.read_reg_mdi(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &sfp_stat); + sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; + if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) + break; + msec_delay(10); + } + + if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) { + DEBUGOUT("EEPROM read did not pass.\n"); + status = IXGBE_ERR_SFP_NOT_PRESENT; + goto out; + } + + /* Read data */ + hw->phy.ops.read_reg_mdi(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data); + + *eeprom_data = (u8)(sfp_data >> 8); + } else { + status = IXGBE_ERR_PHY; + } + +out: + hw->mac.ops.release_swfw_sync(hw, gssr); + return status; +} + +/** + * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data) +{ + return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR, + byte_offset, eeprom_data); +} + +/** + * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: byte offset at address 0xA2 + * @eeprom_data: value read + * + * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C + **/ +STATIC s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data) +{ + return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2, + byte_offset, sff8472_data); +} + +/** + * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u16 ext_ability = 0; + + DEBUGFUNC("ixgbe_get_supported_physical_layer_82598"); + + hw->phy.ops.identify(hw); + + /* Copper PHY must be checked before AUTOC LMS to determine correct + * physical layer because 10GBase-T PHYs use LMS = KX4/KX */ + switch (hw->phy.type) { + case ixgbe_phy_tn: + case ixgbe_phy_cu_unknown: + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); + if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + goto out; + default: + break; + } + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_AN: + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + if (pma_pmd_1g == IXGBE_AUTOC_1G_KX) + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; + else + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX; + break; + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; + else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + else /* XAUI */ + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + break; + case IXGBE_AUTOC_LMS_KX4_AN: + case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: + if (autoc & IXGBE_AUTOC_KX_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + break; + default: + break; + } + + if (hw->phy.type == ixgbe_phy_nl) { + hw->phy.ops.identify_sfp(hw); + + switch (hw->phy.sfp_type) { + case ixgbe_sfp_type_da_cu: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_sfp_type_sr: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + break; + case ixgbe_sfp_type_lr: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; + default: + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + break; + } + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_82598_DA_DUAL_PORT: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case IXGBE_DEV_ID_82598AF_DUAL_PORT: + case IXGBE_DEV_ID_82598AF_SINGLE_PORT: + case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + break; + case IXGBE_DEV_ID_82598EB_XF_LR: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; + default: + break; + } + +out: + return physical_layer; +} + +/** + * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple + * port devices. + * @hw: pointer to the HW structure + * + * Calls common function and corrects issue with some single port devices + * that enable LAN1 but not LAN0. + **/ +void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_bus_info *bus = &hw->bus; + u16 pci_gen = 0; + u16 pci_ctrl2 = 0; + + DEBUGFUNC("ixgbe_set_lan_id_multi_port_pcie_82598"); + + ixgbe_set_lan_id_multi_port_pcie(hw); + + /* check if LAN0 is disabled */ + hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen); + if ((pci_gen != 0) && (pci_gen != 0xFFFF)) { + + hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2); + + /* if LAN0 is completely disabled force function to 0 */ + if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) && + !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) && + !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) { + + bus->func = 0; + } + } +} + +/** + * ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering + * @hw: pointer to hardware structure + * + **/ +void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw) +{ + u32 regval; + u32 i; + + DEBUGFUNC("ixgbe_enable_relaxed_ordering_82598"); + + /* Enable relaxed ordering */ + for (i = 0; ((i < hw->mac.max_tx_queues) && + (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); + regval |= IXGBE_DCA_TXCTRL_DESC_WRO_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); + } + + for (i = 0; ((i < hw->mac.max_rx_queues) && + (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + regval |= IXGBE_DCA_RXCTRL_DATA_WRO_EN | + IXGBE_DCA_RXCTRL_HEAD_WRO_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); + } + +} + +/** + * ixgbe_set_rxpba_82598 - Initialize RX packet buffer + * @hw: pointer to hardware structure + * @num_pb: number of packet buffers to allocate + * @headroom: reserve n KB of headroom + * @strategy: packet buffer allocation strategy + **/ +STATIC void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, + u32 headroom, int strategy) +{ + u32 rxpktsize = IXGBE_RXPBSIZE_64KB; + u8 i = 0; + UNREFERENCED_1PARAMETER(headroom); + + if (!num_pb) + return; + + /* Setup Rx packet buffer sizes */ + switch (strategy) { + case PBA_STRATEGY_WEIGHTED: + /* Setup the first four at 80KB */ + rxpktsize = IXGBE_RXPBSIZE_80KB; + for (; i < 4; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); + /* Setup the last four at 48KB...don't re-init i */ + rxpktsize = IXGBE_RXPBSIZE_48KB; + /* Fall Through */ + case PBA_STRATEGY_EQUAL: + default: + /* Divide the remaining Rx packet buffer evenly among the TCs */ + for (; i < IXGBE_MAX_PACKET_BUFFERS; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); + break; + } + + /* Setup Tx packet buffer sizes */ + for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) + IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB); +} + +/** + * ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL + * + * Enables the Rx DMA unit + **/ +s32 ixgbe_enable_rx_dma_82598(struct ixgbe_hw *hw, u32 regval) +{ + DEBUGFUNC("ixgbe_enable_rx_dma_82598"); + + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); + + return IXGBE_SUCCESS; +} |