diff options
Diffstat (limited to 'drivers/net/ixgbe/base/ixgbe_api.c')
| -rw-r--r-- | drivers/net/ixgbe/base/ixgbe_api.c | 18 |
1 files changed, 17 insertions, 1 deletions
diff --git a/drivers/net/ixgbe/base/ixgbe_api.c b/drivers/net/ixgbe/base/ixgbe_api.c index 4117fb01..e50c1045 100644 --- a/drivers/net/ixgbe/base/ixgbe_api.c +++ b/drivers/net/ixgbe/base/ixgbe_api.c @@ -178,6 +178,7 @@ s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) case IXGBE_DEV_ID_82599EN_SFP: case IXGBE_DEV_ID_82599_CX4: case IXGBE_DEV_ID_82599_LS: + case IXGBE_DEV_ID_82599_BYPASS: case IXGBE_DEV_ID_82599_T3_LOM: hw->mac.type = ixgbe_mac_82599EB; break; @@ -192,6 +193,7 @@ s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) break; case IXGBE_DEV_ID_X540T: case IXGBE_DEV_ID_X540T1: + case IXGBE_DEV_ID_X540_BYPASS: hw->mac.type = ixgbe_mac_X540; hw->mvals = ixgbe_mvals_X540; break; @@ -549,6 +551,7 @@ s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version) * ixgbe_read_phy_reg - Read PHY register * @hw: pointer to hardware structure * @reg_addr: 32 bit address of PHY register to read + * @device_type: type of device you want to communicate with * @phy_data: Pointer to read data from PHY register * * Reads a value from a specified PHY register @@ -567,6 +570,7 @@ s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, * ixgbe_write_phy_reg - Write PHY register * @hw: pointer to hardware structure * @reg_addr: 32 bit PHY register to write + * @device_type: type of device you want to communicate with * @phy_data: Data to write to the PHY register * * Writes a value to specified PHY register @@ -610,6 +614,8 @@ s32 ixgbe_setup_internal_phy(struct ixgbe_hw *hw) /** * ixgbe_check_phy_link - Determine link and speed status * @hw: pointer to hardware structure + * @speed: link speed + * @link_up: true when link is up * * Reads a PHY register to determine if link is up and the current speed for * the PHY. @@ -625,6 +631,7 @@ s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, * ixgbe_setup_phy_link_speed - Set auto advertise * @hw: pointer to hardware structure * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * * Sets the auto advertised capabilities **/ @@ -650,6 +657,9 @@ s32 ixgbe_set_phy_power(struct ixgbe_hw *hw, bool on) /** * ixgbe_check_link - Get link and speed status * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true when link is up + * @link_up_wait_to_complete: bool used to wait for link up or not * * Reads the links register to determine if link is up and the current speed **/ @@ -703,6 +713,7 @@ void ixgbe_flap_tx_laser(struct ixgbe_hw *hw) * ixgbe_setup_link - Set link speed * @hw: pointer to hardware structure * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * * Configures link settings. Restarts the link. * Performs autonegotiation if needed. @@ -719,6 +730,7 @@ s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, * ixgbe_setup_mac_link - Set link speed * @hw: pointer to hardware structure * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * * Configures link settings. Restarts the link. * Performs autonegotiation if needed. @@ -734,6 +746,8 @@ s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, /** * ixgbe_get_link_capabilities - Returns link capabilities * @hw: pointer to hardware structure + * @speed: link speed capabilities + * @autoneg: true when autoneg or autotry is enabled * * Determines the link capabilities of the current configuration. **/ @@ -786,6 +800,7 @@ s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index) /** * ixgbe_blink_led_stop - Stop blinking LEDs * @hw: pointer to hardware structure + * @index: led number to stop * * Stop blinking LED based on index. **/ @@ -1028,6 +1043,7 @@ s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list, * @mc_addr_list: the list of new multicast addresses * @mc_addr_count: number of addresses * @func: iterator function to walk the multicast address list + * @clear: flag, when set clears the table beforehand * * The given list replaces any existing list. Clears the MC addrs from receive * address registers and the multicast table. Uses unused receive address @@ -1241,7 +1257,7 @@ s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee) /** * ixgbe_set_source_address_pruning - Enable/Disable source address pruning * @hw: pointer to hardware structure - * @enbale: enable or disable source address pruning + * @enable: enable or disable source address pruning * @pool: Rx pool - Rx pool to toggle source address pruning **/ void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable, |