summaryrefslogtreecommitdiffstats
path: root/drivers/net/ixgbe/base/ixgbe_phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe/base/ixgbe_phy.c')
-rw-r--r--drivers/net/ixgbe/base/ixgbe_phy.c2687
1 files changed, 2687 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/base/ixgbe_phy.c b/drivers/net/ixgbe/base/ixgbe_phy.c
new file mode 100644
index 00000000..6ed685e8
--- /dev/null
+++ b/drivers/net/ixgbe/base/ixgbe_phy.c
@@ -0,0 +1,2687 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+STATIC void ixgbe_i2c_start(struct ixgbe_hw *hw);
+STATIC void ixgbe_i2c_stop(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data);
+STATIC s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data);
+STATIC s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data);
+STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data);
+STATIC void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
+STATIC void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
+STATIC s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
+STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl);
+STATIC s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *sff8472_data);
+
+/**
+ * ixgbe_out_i2c_byte_ack - Send I2C byte with ack
+ * @hw: pointer to the hardware structure
+ * @byte: byte to send
+ *
+ * Returns an error code on error.
+ */
+STATIC s32 ixgbe_out_i2c_byte_ack(struct ixgbe_hw *hw, u8 byte)
+{
+ s32 status;
+
+ status = ixgbe_clock_out_i2c_byte(hw, byte);
+ if (status)
+ return status;
+ return ixgbe_get_i2c_ack(hw);
+}
+
+/**
+ * ixgbe_in_i2c_byte_ack - Receive an I2C byte and send ack
+ * @hw: pointer to the hardware structure
+ * @byte: pointer to a u8 to receive the byte
+ *
+ * Returns an error code on error.
+ */
+STATIC s32 ixgbe_in_i2c_byte_ack(struct ixgbe_hw *hw, u8 *byte)
+{
+ s32 status;
+
+ status = ixgbe_clock_in_i2c_byte(hw, byte);
+ if (status)
+ return status;
+ /* ACK */
+ return ixgbe_clock_out_i2c_bit(hw, false);
+}
+
+/**
+ * ixgbe_ones_comp_byte_add - Perform one's complement addition
+ * @add1 - addend 1
+ * @add2 - addend 2
+ *
+ * Returns one's complement 8-bit sum.
+ */
+STATIC u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2)
+{
+ u16 sum = add1 + add2;
+
+ sum = (sum & 0xFF) + (sum >> 8);
+ return sum & 0xFF;
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic_int - Perform I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ * @lock: true if to take and release semaphore
+ *
+ * Returns an error code on error.
+ */
+s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, u16 reg,
+ u16 *val, bool lock)
+{
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+ int max_retry = 10;
+ int retry = 0;
+ u8 csum_byte;
+ u8 high_bits;
+ u8 low_bits;
+ u8 reg_high;
+ u8 csum;
+
+ if (hw->mac.type >= ixgbe_mac_X550)
+ max_retry = 3;
+ reg_high = ((reg >> 7) & 0xFE) | 1; /* Indicate read combined */
+ csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
+ csum = ~csum;
+ do {
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return IXGBE_ERR_SWFW_SYNC;
+ ixgbe_i2c_start(hw);
+ /* Device Address and write indication */
+ if (ixgbe_out_i2c_byte_ack(hw, addr))
+ goto fail;
+ /* Write bits 14:8 */
+ if (ixgbe_out_i2c_byte_ack(hw, reg_high))
+ goto fail;
+ /* Write bits 7:0 */
+ if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
+ goto fail;
+ /* Write csum */
+ if (ixgbe_out_i2c_byte_ack(hw, csum))
+ goto fail;
+ /* Re-start condition */
+ ixgbe_i2c_start(hw);
+ /* Device Address and read indication */
+ if (ixgbe_out_i2c_byte_ack(hw, addr | 1))
+ goto fail;
+ /* Get upper bits */
+ if (ixgbe_in_i2c_byte_ack(hw, &high_bits))
+ goto fail;
+ /* Get low bits */
+ if (ixgbe_in_i2c_byte_ack(hw, &low_bits))
+ goto fail;
+ /* Get csum */
+ if (ixgbe_clock_in_i2c_byte(hw, &csum_byte))
+ goto fail;
+ /* NACK */
+ if (ixgbe_clock_out_i2c_bit(hw, false))
+ goto fail;
+ ixgbe_i2c_stop(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ *val = (high_bits << 8) | low_bits;
+ return 0;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ retry++;
+ if (retry < max_retry)
+ DEBUGOUT("I2C byte read combined error - Retrying.\n");
+ else
+ DEBUGOUT("I2C byte read combined error.\n");
+ } while (retry < max_retry);
+
+ return IXGBE_ERR_I2C;
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ * @lock: true if to take and release semaphore
+ *
+ * Returns an error code on error.
+ */
+s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr, u16 reg,
+ u16 val, bool lock)
+{
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+ int max_retry = 1;
+ int retry = 0;
+ u8 reg_high;
+ u8 csum;
+
+ reg_high = (reg >> 7) & 0xFE; /* Indicate write combined */
+ csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
+ csum = ixgbe_ones_comp_byte_add(csum, val >> 8);
+ csum = ixgbe_ones_comp_byte_add(csum, val & 0xFF);
+ csum = ~csum;
+ do {
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return IXGBE_ERR_SWFW_SYNC;
+ ixgbe_i2c_start(hw);
+ /* Device Address and write indication */
+ if (ixgbe_out_i2c_byte_ack(hw, addr))
+ goto fail;
+ /* Write bits 14:8 */
+ if (ixgbe_out_i2c_byte_ack(hw, reg_high))
+ goto fail;
+ /* Write bits 7:0 */
+ if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
+ goto fail;
+ /* Write data 15:8 */
+ if (ixgbe_out_i2c_byte_ack(hw, val >> 8))
+ goto fail;
+ /* Write data 7:0 */
+ if (ixgbe_out_i2c_byte_ack(hw, val & 0xFF))
+ goto fail;
+ /* Write csum */
+ if (ixgbe_out_i2c_byte_ack(hw, csum))
+ goto fail;
+ ixgbe_i2c_stop(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ return 0;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ retry++;
+ if (retry < max_retry)
+ DEBUGOUT("I2C byte write combined error - Retrying.\n");
+ else
+ DEBUGOUT("I2C byte write combined error.\n");
+ } while (retry < max_retry);
+
+ return IXGBE_ERR_I2C;
+}
+
+/**
+ * ixgbe_init_phy_ops_generic - Inits PHY function ptrs
+ * @hw: pointer to the hardware structure
+ *
+ * Initialize the function pointers.
+ **/
+s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_phy_info *phy = &hw->phy;
+
+ DEBUGFUNC("ixgbe_init_phy_ops_generic");
+
+ /* PHY */
+ phy->ops.identify = ixgbe_identify_phy_generic;
+ phy->ops.reset = ixgbe_reset_phy_generic;
+ phy->ops.read_reg = ixgbe_read_phy_reg_generic;
+ phy->ops.write_reg = ixgbe_write_phy_reg_generic;
+ phy->ops.read_reg_mdi = ixgbe_read_phy_reg_mdi;
+ phy->ops.write_reg_mdi = ixgbe_write_phy_reg_mdi;
+ phy->ops.setup_link = ixgbe_setup_phy_link_generic;
+ phy->ops.setup_link_speed = ixgbe_setup_phy_link_speed_generic;
+ phy->ops.check_link = NULL;
+ phy->ops.get_firmware_version = ixgbe_get_phy_firmware_version_generic;
+ phy->ops.read_i2c_byte = ixgbe_read_i2c_byte_generic;
+ phy->ops.write_i2c_byte = ixgbe_write_i2c_byte_generic;
+ phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_generic;
+ phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_generic;
+ phy->ops.write_i2c_eeprom = ixgbe_write_i2c_eeprom_generic;
+ phy->ops.i2c_bus_clear = ixgbe_i2c_bus_clear;
+ phy->ops.identify_sfp = ixgbe_identify_module_generic;
+ phy->sfp_type = ixgbe_sfp_type_unknown;
+ phy->ops.read_i2c_byte_unlocked = ixgbe_read_i2c_byte_generic_unlocked;
+ phy->ops.write_i2c_byte_unlocked =
+ ixgbe_write_i2c_byte_generic_unlocked;
+ phy->ops.check_overtemp = ixgbe_tn_check_overtemp;
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_identify_phy_generic - Get physical layer module
+ * @hw: pointer to hardware structure
+ *
+ * Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ u32 phy_addr;
+ u16 ext_ability = 0;
+
+ DEBUGFUNC("ixgbe_identify_phy_generic");
+
+ if (!hw->phy.phy_semaphore_mask) {
+ if (hw->bus.lan_id)
+ hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
+ else
+ hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
+ }
+
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+ if (ixgbe_validate_phy_addr(hw, phy_addr)) {
+ hw->phy.addr = phy_addr;
+ ixgbe_get_phy_id(hw);
+ hw->phy.type =
+ ixgbe_get_phy_type_from_id(hw->phy.id);
+
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_PHY_EXT_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &ext_ability);
+ if (ext_ability &
+ (IXGBE_MDIO_PHY_10GBASET_ABILITY |
+ IXGBE_MDIO_PHY_1000BASET_ABILITY))
+ hw->phy.type =
+ ixgbe_phy_cu_unknown;
+ else
+ hw->phy.type =
+ ixgbe_phy_generic;
+ }
+
+ status = IXGBE_SUCCESS;
+ break;
+ }
+ }
+
+ /* Certain media types do not have a phy so an address will not
+ * be found and the code will take this path. Caller has to
+ * decide if it is an error or not.
+ */
+ if (status != IXGBE_SUCCESS) {
+ hw->phy.addr = 0;
+ }
+ } else {
+ status = IXGBE_SUCCESS;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_check_reset_blocked - check status of MNG FW veto bit
+ * @hw: pointer to the hardware structure
+ *
+ * This function checks the MMNGC.MNG_VETO bit to see if there are
+ * any constraints on link from manageability. For MAC's that don't
+ * have this bit just return faluse since the link can not be blocked
+ * via this method.
+ **/
+s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
+{
+ u32 mmngc;
+
+ DEBUGFUNC("ixgbe_check_reset_blocked");
+
+ /* If we don't have this bit, it can't be blocking */
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ return false;
+
+ mmngc = IXGBE_READ_REG(hw, IXGBE_MMNGC);
+ if (mmngc & IXGBE_MMNGC_MNG_VETO) {
+ ERROR_REPORT1(IXGBE_ERROR_SOFTWARE,
+ "MNG_VETO bit detected.\n");
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * ixgbe_validate_phy_addr - Determines phy address is valid
+ * @hw: pointer to hardware structure
+ *
+ **/
+bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
+{
+ u16 phy_id = 0;
+ bool valid = false;
+
+ DEBUGFUNC("ixgbe_validate_phy_addr");
+
+ hw->phy.addr = phy_addr;
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);
+
+ if (phy_id != 0xFFFF && phy_id != 0x0)
+ valid = true;
+
+ return valid;
+}
+
+/**
+ * ixgbe_get_phy_id - Get the phy type
+ * @hw: pointer to hardware structure
+ *
+ **/
+s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
+{
+ u32 status;
+ u16 phy_id_high = 0;
+ u16 phy_id_low = 0;
+
+ DEBUGFUNC("ixgbe_get_phy_id");
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &phy_id_high);
+
+ if (status == IXGBE_SUCCESS) {
+ hw->phy.id = (u32)(phy_id_high << 16);
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &phy_id_low);
+ hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
+ hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
+ }
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_type_from_id - Get the phy type
+ * @phy_id: PHY ID information
+ *
+ **/
+enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
+{
+ enum ixgbe_phy_type phy_type;
+
+ DEBUGFUNC("ixgbe_get_phy_type_from_id");
+
+ switch (phy_id) {
+ case TN1010_PHY_ID:
+ phy_type = ixgbe_phy_tn;
+ break;
+ case X550_PHY_ID1:
+ case X550_PHY_ID2:
+ case X550_PHY_ID3:
+ case X540_PHY_ID:
+ phy_type = ixgbe_phy_aq;
+ break;
+ case QT2022_PHY_ID:
+ phy_type = ixgbe_phy_qt;
+ break;
+ case ATH_PHY_ID:
+ phy_type = ixgbe_phy_nl;
+ break;
+ case X557_PHY_ID:
+ phy_type = ixgbe_phy_x550em_ext_t;
+ break;
+ default:
+ phy_type = ixgbe_phy_unknown;
+ break;
+ }
+ return phy_type;
+}
+
+/**
+ * ixgbe_reset_phy_generic - Performs a PHY reset
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u16 ctrl = 0;
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_reset_phy_generic");
+
+ if (hw->phy.type == ixgbe_phy_unknown)
+ status = ixgbe_identify_phy_generic(hw);
+
+ if (status != IXGBE_SUCCESS || hw->phy.type == ixgbe_phy_none)
+ goto out;
+
+ /* Don't reset PHY if it's shut down due to overtemp. */
+ if (!hw->phy.reset_if_overtemp &&
+ (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw)))
+ goto out;
+
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ goto out;
+
+ /*
+ * Perform soft PHY reset to the PHY_XS.
+ * This will cause a soft reset to the PHY
+ */
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE,
+ IXGBE_MDIO_PHY_XS_RESET);
+
+ /*
+ * Poll for reset bit to self-clear indicating reset is complete.
+ * Some PHYs could take up to 3 seconds to complete and need about
+ * 1.7 usec delay after the reset is complete.
+ */
+ for (i = 0; i < 30; i++) {
+ msec_delay(100);
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE, &ctrl);
+ if (!(ctrl & IXGBE_MDIO_PHY_XS_RESET)) {
+ usec_delay(2);
+ break;
+ }
+ }
+
+ if (ctrl & IXGBE_MDIO_PHY_XS_RESET) {
+ status = IXGBE_ERR_RESET_FAILED;
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "PHY reset polling failed to complete.\n");
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_phy_mdi - Reads a value from a specified PHY register without
+ * the SWFW lock
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 *phy_data)
+{
+ u32 i, data, command;
+
+ /* Setup and write the address cycle command */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle completed.
+ * The MDI Command bit will clear when the operation is
+ * complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ usec_delay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address command did not complete.\n");
+ return IXGBE_ERR_PHY;
+ }
+
+ /*
+ * Address cycle complete, setup and write the read
+ * command
+ */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle
+ * completed. The MDI Command bit will clear when the
+ * operation is complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ usec_delay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY read command didn't complete\n");
+ return IXGBE_ERR_PHY;
+ }
+
+ /*
+ * Read operation is complete. Get the data
+ * from MSRWD
+ */
+ data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
+ data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
+ *phy_data = (u16)(data);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
+ * using the SWFW lock - this function is needed in most cases
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data)
+{
+ s32 status;
+ u32 gssr = hw->phy.phy_semaphore_mask;
+
+ DEBUGFUNC("ixgbe_read_phy_reg_generic");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
+ status = ixgbe_read_phy_reg_mdi(hw, reg_addr, device_type,
+ phy_data);
+ hw->mac.ops.release_swfw_sync(hw, gssr);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register
+ * without SWFW lock
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 5 bit device type
+ * @phy_data: Data to write to the PHY register
+ **/
+s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
+{
+ u32 i, command;
+
+ /* Put the data in the MDI single read and write data register*/
+ IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
+
+ /* Setup and write the address cycle command */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle completed.
+ * The MDI Command bit will clear when the operation is
+ * complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ usec_delay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address cmd didn't complete\n");
+ return IXGBE_ERR_PHY;
+ }
+
+ /*
+ * Address cycle complete, setup and write the write
+ * command
+ */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle
+ * completed. The MDI Command bit will clear when the
+ * operation is complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ usec_delay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY write cmd didn't complete\n");
+ return IXGBE_ERR_PHY;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
+ * using SWFW lock- this function is needed in most cases
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 5 bit device type
+ * @phy_data: Data to write to the PHY register
+ **/
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
+{
+ s32 status;
+ u32 gssr = hw->phy.phy_semaphore_mask;
+
+ DEBUGFUNC("ixgbe_write_phy_reg_generic");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
+ status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type,
+ phy_data);
+ hw->mac.ops.release_swfw_sync(hw, gssr);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_phy_link_generic - Set and restart auto-neg
+ * @hw: pointer to hardware structure
+ *
+ * Restart auto-negotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+ bool autoneg = false;
+ ixgbe_link_speed speed;
+
+ DEBUGFUNC("ixgbe_setup_phy_link_generic");
+
+ ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ /* Set or unset auto-negotiation 10G advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ if (hw->mac.type == ixgbe_mac_X550) {
+ if (speed & IXGBE_LINK_SPEED_5GB_FULL) {
+ /* Set or unset auto-negotiation 5G advertisement */
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_5GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised &
+ IXGBE_LINK_SPEED_5GB_FULL)
+ autoneg_reg |= IXGBE_MII_5GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_2_5GB_FULL) {
+ /* Set or unset auto-negotiation 2.5G advertisement */
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_2_5GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised &
+ IXGBE_LINK_SPEED_2_5GB_FULL)
+ autoneg_reg |= IXGBE_MII_2_5GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+ }
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+ /* Set or unset auto-negotiation 1G advertisement */
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL) {
+ /* Set or unset auto-negotiation 100M advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~(IXGBE_MII_100BASE_T_ADVERTISE |
+ IXGBE_MII_100BASE_T_ADVERTISE_HALF);
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+ autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ /* Blocked by MNG FW so don't reset PHY */
+ if (ixgbe_check_reset_blocked(hw))
+ return status;
+
+ /* Restart PHY auto-negotiation. */
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+
+ autoneg_reg |= IXGBE_MII_RESTART;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ **/
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
+
+ DEBUGFUNC("ixgbe_setup_phy_link_speed_generic");
+
+ /*
+ * Clear autoneg_advertised and set new values based on input link
+ * speed.
+ */
+ hw->phy.autoneg_advertised = 0;
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_5GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_5GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_2_5GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_2_5GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+ /* Setup link based on the new speed settings */
+ ixgbe_setup_phy_link(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_copper_speeds_supported - Get copper link speeds from phy
+ * @hw: pointer to hardware structure
+ *
+ * Determines the supported link capabilities by reading the PHY auto
+ * negotiation register.
+ **/
+static s32 ixgbe_get_copper_speeds_supported(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 speed_ability;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &speed_ability);
+ if (status)
+ return status;
+
+ if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_1GB_FULL;
+ if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M)
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_100_FULL;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_X550:
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_2_5GB_FULL;
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_5GB_FULL;
+ break;
+ case ixgbe_mac_X550EM_x:
+ hw->phy.speeds_supported &= ~IXGBE_LINK_SPEED_100_FULL;
+ break;
+ default:
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: boolean auto-negotiation value
+ **/
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_get_copper_link_capabilities_generic");
+
+ *autoneg = true;
+ if (!hw->phy.speeds_supported)
+ status = ixgbe_get_copper_speeds_supported(hw);
+
+ *speed = hw->phy.speeds_supported;
+ return status;
+}
+
+/**
+ * ixgbe_check_phy_link_tnx - Determine link and speed status
+ * @hw: pointer to hardware structure
+ *
+ * Reads the VS1 register to determine if link is up and the current speed for
+ * the PHY.
+ **/
+s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up)
+{
+ s32 status = IXGBE_SUCCESS;
+ u32 time_out;
+ u32 max_time_out = 10;
+ u16 phy_link = 0;
+ u16 phy_speed = 0;
+ u16 phy_data = 0;
+
+ DEBUGFUNC("ixgbe_check_phy_link_tnx");
+
+ /* Initialize speed and link to default case */
+ *link_up = false;
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+ /*
+ * Check current speed and link status of the PHY register.
+ * This is a vendor specific register and may have to
+ * be changed for other copper PHYs.
+ */
+ for (time_out = 0; time_out < max_time_out; time_out++) {
+ usec_delay(10);
+ status = hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ &phy_data);
+ phy_link = phy_data & IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
+ phy_speed = phy_data &
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
+ if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
+ *link_up = true;
+ if (phy_speed ==
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_phy_link_tnx - Set and restart auto-neg
+ * @hw: pointer to hardware structure
+ *
+ * Restart auto-negotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+ bool autoneg = false;
+ ixgbe_link_speed speed;
+
+ DEBUGFUNC("ixgbe_setup_phy_link_tnx");
+
+ ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ /* Set or unset auto-negotiation 10G advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+ /* Set or unset auto-negotiation 1G advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL) {
+ /* Set or unset auto-negotiation 100M advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_100BASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+ autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ /* Blocked by MNG FW so don't reset PHY */
+ if (ixgbe_check_reset_blocked(hw))
+ return status;
+
+ /* Restart PHY auto-negotiation. */
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
+
+ autoneg_reg |= IXGBE_MII_RESTART;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
+ u16 *firmware_version)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_get_phy_firmware_version_tnx");
+
+ status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ firmware_version);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+ u16 *firmware_version)
+{
+ s32 status;
+
+ DEBUGFUNC("ixgbe_get_phy_firmware_version_generic");
+
+ status = hw->phy.ops.read_reg(hw, AQ_FW_REV,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ firmware_version);
+
+ return status;
+}
+
+/**
+ * ixgbe_reset_phy_nl - Performs a PHY reset
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
+{
+ u16 phy_offset, control, eword, edata, block_crc;
+ bool end_data = false;
+ u16 list_offset, data_offset;
+ u16 phy_data = 0;
+ s32 ret_val = IXGBE_SUCCESS;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_reset_phy_nl");
+
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ goto out;
+
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
+
+ /* reset the PHY and poll for completion */
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE,
+ (phy_data | IXGBE_MDIO_PHY_XS_RESET));
+
+ for (i = 0; i < 100; i++) {
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
+ if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0)
+ break;
+ msec_delay(10);
+ }
+
+ if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) {
+ DEBUGOUT("PHY reset did not complete.\n");
+ ret_val = IXGBE_ERR_PHY;
+ goto out;
+ }
+
+ /* Get init offsets */
+ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+ &data_offset);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc);
+ data_offset++;
+ while (!end_data) {
+ /*
+ * Read control word from PHY init contents offset
+ */
+ ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
+ if (ret_val)
+ goto err_eeprom;
+ control = (eword & IXGBE_CONTROL_MASK_NL) >>
+ IXGBE_CONTROL_SHIFT_NL;
+ edata = eword & IXGBE_DATA_MASK_NL;
+ switch (control) {
+ case IXGBE_DELAY_NL:
+ data_offset++;
+ DEBUGOUT1("DELAY: %d MS\n", edata);
+ msec_delay(edata);
+ break;
+ case IXGBE_DATA_NL:
+ DEBUGOUT("DATA:\n");
+ data_offset++;
+ ret_val = hw->eeprom.ops.read(hw, data_offset,
+ &phy_offset);
+ if (ret_val)
+ goto err_eeprom;
+ data_offset++;
+ for (i = 0; i < edata; i++) {
+ ret_val = hw->eeprom.ops.read(hw, data_offset,
+ &eword);
+ if (ret_val)
+ goto err_eeprom;
+ hw->phy.ops.write_reg(hw, phy_offset,
+ IXGBE_TWINAX_DEV, eword);
+ DEBUGOUT2("Wrote %4.4x to %4.4x\n", eword,
+ phy_offset);
+ data_offset++;
+ phy_offset++;
+ }
+ break;
+ case IXGBE_CONTROL_NL:
+ data_offset++;
+ DEBUGOUT("CONTROL:\n");
+ if (edata == IXGBE_CONTROL_EOL_NL) {
+ DEBUGOUT("EOL\n");
+ end_data = true;
+ } else if (edata == IXGBE_CONTROL_SOL_NL) {
+ DEBUGOUT("SOL\n");
+ } else {
+ DEBUGOUT("Bad control value\n");
+ ret_val = IXGBE_ERR_PHY;
+ goto out;
+ }
+ break;
+ default:
+ DEBUGOUT("Bad control type\n");
+ ret_val = IXGBE_ERR_PHY;
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+
+err_eeprom:
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", data_offset);
+ return IXGBE_ERR_PHY;
+}
+
+/**
+ * ixgbe_identify_module_generic - Identifies module type
+ * @hw: pointer to hardware structure
+ *
+ * Determines HW type and calls appropriate function.
+ **/
+s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_SFP_NOT_PRESENT;
+
+ DEBUGFUNC("ixgbe_identify_module_generic");
+
+ switch (hw->mac.ops.get_media_type(hw)) {
+ case ixgbe_media_type_fiber:
+ status = ixgbe_identify_sfp_module_generic(hw);
+ break;
+
+ case ixgbe_media_type_fiber_qsfp:
+ status = ixgbe_identify_qsfp_module_generic(hw);
+ break;
+
+ default:
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_identify_sfp_module_generic - Identifies SFP modules
+ * @hw: pointer to hardware structure
+ *
+ * Searches for and identifies the SFP module and assigns appropriate PHY type.
+ **/
+s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ u32 vendor_oui = 0;
+ enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+ u8 identifier = 0;
+ u8 comp_codes_1g = 0;
+ u8 comp_codes_10g = 0;
+ u8 oui_bytes[3] = {0, 0, 0};
+ u8 cable_tech = 0;
+ u8 cable_spec = 0;
+ u16 enforce_sfp = 0;
+
+ DEBUGFUNC("ixgbe_identify_sfp_module_generic");
+
+ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) {
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ goto out;
+ }
+
+ /* LAN ID is needed for I2C access */
+ hw->mac.ops.set_lan_id(hw);
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_IDENTIFIER,
+ &identifier);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ if (identifier != IXGBE_SFF_IDENTIFIER_SFP) {
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ } else {
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_1GBE_COMP_CODES,
+ &comp_codes_1g);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_10GBE_COMP_CODES,
+ &comp_codes_10g);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_CABLE_TECHNOLOGY,
+ &cable_tech);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ /* ID Module
+ * =========
+ * 0 SFP_DA_CU
+ * 1 SFP_SR
+ * 2 SFP_LR
+ * 3 SFP_DA_CORE0 - 82599-specific
+ * 4 SFP_DA_CORE1 - 82599-specific
+ * 5 SFP_SR/LR_CORE0 - 82599-specific
+ * 6 SFP_SR/LR_CORE1 - 82599-specific
+ * 7 SFP_act_lmt_DA_CORE0 - 82599-specific
+ * 8 SFP_act_lmt_DA_CORE1 - 82599-specific
+ * 9 SFP_1g_cu_CORE0 - 82599-specific
+ * 10 SFP_1g_cu_CORE1 - 82599-specific
+ * 11 SFP_1g_sx_CORE0 - 82599-specific
+ * 12 SFP_1g_sx_CORE1 - 82599-specific
+ */
+ if (hw->mac.type == ixgbe_mac_82598EB) {
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_sr;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_lr;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+ } else {
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_cu_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_cu_core1;
+ } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) {
+ hw->phy.ops.read_i2c_eeprom(
+ hw, IXGBE_SFF_CABLE_SPEC_COMP,
+ &cable_spec);
+ if (cable_spec &
+ IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core1;
+ } else {
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_unknown;
+ }
+ } else if (comp_codes_10g &
+ (IXGBE_SFF_10GBASESR_CAPABLE |
+ IXGBE_SFF_10GBASELR_CAPABLE)) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_srlr_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_srlr_core1;
+ } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_cu_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_cu_core1;
+ } else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_sx_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_sx_core1;
+ } else if (comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_lx_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_lx_core1;
+ } else {
+ hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+ }
+ }
+
+ if (hw->phy.sfp_type != stored_sfp_type)
+ hw->phy.sfp_setup_needed = true;
+
+ /* Determine if the SFP+ PHY is dual speed or not. */
+ hw->phy.multispeed_fiber = false;
+ if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+ ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+ hw->phy.multispeed_fiber = true;
+
+ /* Determine PHY vendor */
+ if (hw->phy.type != ixgbe_phy_nl) {
+ hw->phy.id = identifier;
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_VENDOR_OUI_BYTE0,
+ &oui_bytes[0]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_VENDOR_OUI_BYTE1,
+ &oui_bytes[1]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_VENDOR_OUI_BYTE2,
+ &oui_bytes[2]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ vendor_oui =
+ ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+ (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+ (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+ switch (vendor_oui) {
+ case IXGBE_SFF_VENDOR_OUI_TYCO:
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+ hw->phy.type =
+ ixgbe_phy_sfp_passive_tyco;
+ break;
+ case IXGBE_SFF_VENDOR_OUI_FTL:
+ if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
+ hw->phy.type = ixgbe_phy_sfp_ftl_active;
+ else
+ hw->phy.type = ixgbe_phy_sfp_ftl;
+ break;
+ case IXGBE_SFF_VENDOR_OUI_AVAGO:
+ hw->phy.type = ixgbe_phy_sfp_avago;
+ break;
+ case IXGBE_SFF_VENDOR_OUI_INTEL:
+ hw->phy.type = ixgbe_phy_sfp_intel;
+ break;
+ default:
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+ hw->phy.type =
+ ixgbe_phy_sfp_passive_unknown;
+ else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
+ hw->phy.type =
+ ixgbe_phy_sfp_active_unknown;
+ else
+ hw->phy.type = ixgbe_phy_sfp_unknown;
+ break;
+ }
+ }
+
+ /* Allow any DA cable vendor */
+ if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE |
+ IXGBE_SFF_DA_ACTIVE_CABLE)) {
+ status = IXGBE_SUCCESS;
+ goto out;
+ }
+
+ /* Verify supported 1G SFP modules */
+ if (comp_codes_10g == 0 &&
+ !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+
+ /* Anything else 82598-based is supported */
+ if (hw->mac.type == ixgbe_mac_82598EB) {
+ status = IXGBE_SUCCESS;
+ goto out;
+ }
+
+ ixgbe_get_device_caps(hw, &enforce_sfp);
+ if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
+ !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
+ /* Make sure we're a supported PHY type */
+ if (hw->phy.type == ixgbe_phy_sfp_intel) {
+ status = IXGBE_SUCCESS;
+ } else {
+ if (hw->allow_unsupported_sfp == true) {
+ EWARN(hw, "WARNING: Intel (R) Network "
+ "Connections are quality tested "
+ "using Intel (R) Ethernet Optics."
+ " Using untested modules is not "
+ "supported and may cause unstable"
+ " operation or damage to the "
+ "module or the adapter. Intel "
+ "Corporation is not responsible "
+ "for any harm caused by using "
+ "untested modules.\n", status);
+ status = IXGBE_SUCCESS;
+ } else {
+ DEBUGOUT("SFP+ module not supported\n");
+ hw->phy.type =
+ ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+ }
+ } else {
+ status = IXGBE_SUCCESS;
+ }
+ }
+
+out:
+ return status;
+
+err_read_i2c_eeprom:
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ if (hw->phy.type != ixgbe_phy_nl) {
+ hw->phy.id = 0;
+ hw->phy.type = ixgbe_phy_unknown;
+ }
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+/**
+ * ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current SFP.
+ */
+s32 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u8 comp_codes_10g = 0;
+ u8 comp_codes_1g = 0;
+
+ DEBUGFUNC("ixgbe_get_supported_phy_sfp_layer_generic");
+
+ hw->phy.ops.identify_sfp(hw);
+ if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+ return physical_layer;
+
+ switch (hw->phy.type) {
+ case ixgbe_phy_sfp_passive_tyco:
+ case ixgbe_phy_sfp_passive_unknown:
+ case ixgbe_phy_qsfp_passive_unknown:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
+ case ixgbe_phy_sfp_ftl_active:
+ case ixgbe_phy_sfp_active_unknown:
+ case ixgbe_phy_qsfp_active_unknown:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
+ break;
+ case ixgbe_phy_sfp_avago:
+ case ixgbe_phy_sfp_ftl:
+ case ixgbe_phy_sfp_intel:
+ case ixgbe_phy_sfp_unknown:
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
+ if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX;
+ break;
+ case ixgbe_phy_qsfp_intel:
+ case ixgbe_phy_qsfp_unknown:
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g);
+ if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
+ default:
+ break;
+ }
+
+ return physical_layer;
+}
+
+/**
+ * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
+ * @hw: pointer to hardware structure
+ *
+ * Searches for and identifies the QSFP module and assigns appropriate PHY type
+ **/
+s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ u32 vendor_oui = 0;
+ enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+ u8 identifier = 0;
+ u8 comp_codes_1g = 0;
+ u8 comp_codes_10g = 0;
+ u8 oui_bytes[3] = {0, 0, 0};
+ u16 enforce_sfp = 0;
+ u8 connector = 0;
+ u8 cable_length = 0;
+ u8 device_tech = 0;
+ bool active_cable = false;
+
+ DEBUGFUNC("ixgbe_identify_qsfp_module_generic");
+
+ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) {
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ goto out;
+ }
+
+ /* LAN ID is needed for I2C access */
+ hw->mac.ops.set_lan_id(hw);
+
+ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
+ &identifier);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) {
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+
+ hw->phy.id = identifier;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP,
+ &comp_codes_10g);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_1GBE_COMP,
+ &comp_codes_1g);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) {
+ hw->phy.type = ixgbe_phy_qsfp_passive_unknown;
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1;
+ } else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+ IXGBE_SFF_10GBASELR_CAPABLE)) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1;
+ } else {
+ if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE)
+ active_cable = true;
+
+ if (!active_cable) {
+ /* check for active DA cables that pre-date
+ * SFF-8436 v3.6 */
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_CONNECTOR,
+ &connector);
+
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_CABLE_LENGTH,
+ &cable_length);
+
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_DEVICE_TECH,
+ &device_tech);
+
+ if ((connector ==
+ IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE) &&
+ (cable_length > 0) &&
+ ((device_tech >> 4) ==
+ IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL))
+ active_cable = true;
+ }
+
+ if (active_cable) {
+ hw->phy.type = ixgbe_phy_qsfp_active_unknown;
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core1;
+ } else {
+ /* unsupported module type */
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+ }
+
+ if (hw->phy.sfp_type != stored_sfp_type)
+ hw->phy.sfp_setup_needed = true;
+
+ /* Determine if the QSFP+ PHY is dual speed or not. */
+ hw->phy.multispeed_fiber = false;
+ if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+ ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+ hw->phy.multispeed_fiber = true;
+
+ /* Determine PHY vendor for optical modules */
+ if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+ IXGBE_SFF_10GBASELR_CAPABLE)) {
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0,
+ &oui_bytes[0]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1,
+ &oui_bytes[1]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2,
+ &oui_bytes[2]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ vendor_oui =
+ ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+ (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+ (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+ if (vendor_oui == IXGBE_SFF_VENDOR_OUI_INTEL)
+ hw->phy.type = ixgbe_phy_qsfp_intel;
+ else
+ hw->phy.type = ixgbe_phy_qsfp_unknown;
+
+ ixgbe_get_device_caps(hw, &enforce_sfp);
+ if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
+ /* Make sure we're a supported PHY type */
+ if (hw->phy.type == ixgbe_phy_qsfp_intel) {
+ status = IXGBE_SUCCESS;
+ } else {
+ if (hw->allow_unsupported_sfp == true) {
+ EWARN(hw, "WARNING: Intel (R) Network "
+ "Connections are quality tested "
+ "using Intel (R) Ethernet Optics."
+ " Using untested modules is not "
+ "supported and may cause unstable"
+ " operation or damage to the "
+ "module or the adapter. Intel "
+ "Corporation is not responsible "
+ "for any harm caused by using "
+ "untested modules.\n", status);
+ status = IXGBE_SUCCESS;
+ } else {
+ DEBUGOUT("QSFP module not supported\n");
+ hw->phy.type =
+ ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+ }
+ } else {
+ status = IXGBE_SUCCESS;
+ }
+ }
+
+out:
+ return status;
+
+err_read_i2c_eeprom:
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ hw->phy.id = 0;
+ hw->phy.type = ixgbe_phy_unknown;
+
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+
+/**
+ * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
+ * @hw: pointer to hardware structure
+ * @list_offset: offset to the SFP ID list
+ * @data_offset: offset to the SFP data block
+ *
+ * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
+ * so it returns the offsets to the phy init sequence block.
+ **/
+s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
+ u16 *list_offset,
+ u16 *data_offset)
+{
+ u16 sfp_id;
+ u16 sfp_type = hw->phy.sfp_type;
+
+ DEBUGFUNC("ixgbe_get_sfp_init_sequence_offsets");
+
+ if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+ if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+
+ if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) &&
+ (hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+ /*
+ * Limiting active cables and 1G Phys must be initialized as
+ * SR modules
+ */
+ if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
+ sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
+ sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+ sfp_type == ixgbe_sfp_type_1g_sx_core0)
+ sfp_type = ixgbe_sfp_type_srlr_core0;
+ else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
+ sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
+ sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ sfp_type == ixgbe_sfp_type_1g_sx_core1)
+ sfp_type = ixgbe_sfp_type_srlr_core1;
+
+ /* Read offset to PHY init contents */
+ if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed",
+ IXGBE_PHY_INIT_OFFSET_NL);
+ return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+ }
+
+ if ((!*list_offset) || (*list_offset == 0xFFFF))
+ return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+
+ /* Shift offset to first ID word */
+ (*list_offset)++;
+
+ /*
+ * Find the matching SFP ID in the EEPROM
+ * and program the init sequence
+ */
+ if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+ goto err_phy;
+
+ while (sfp_id != IXGBE_PHY_INIT_END_NL) {
+ if (sfp_id == sfp_type) {
+ (*list_offset)++;
+ if (hw->eeprom.ops.read(hw, *list_offset, data_offset))
+ goto err_phy;
+ if ((!*data_offset) || (*data_offset == 0xFFFF)) {
+ DEBUGOUT("SFP+ module not supported\n");
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ } else {
+ break;
+ }
+ } else {
+ (*list_offset) += 2;
+ if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+ goto err_phy;
+ }
+ }
+
+ if (sfp_id == IXGBE_PHY_INIT_END_NL) {
+ DEBUGOUT("No matching SFP+ module found\n");
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+
+ return IXGBE_SUCCESS;
+
+err_phy:
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", *list_offset);
+ return IXGBE_ERR_PHY;
+}
+
+/**
+ * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data)
+{
+ DEBUGFUNC("ixgbe_read_i2c_eeprom_generic");
+
+ return hw->phy.ops.read_i2c_byte(hw, byte_offset,
+ IXGBE_I2C_EEPROM_DEV_ADDR,
+ eeprom_data);
+}
+
+/**
+ * ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset at address 0xA2
+ * @eeprom_data: value read
+ *
+ * Performs byte read operation to SFP module's SFF-8472 data over I2C
+ **/
+STATIC s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *sff8472_data)
+{
+ return hw->phy.ops.read_i2c_byte(hw, byte_offset,
+ IXGBE_I2C_EEPROM_DEV_ADDR2,
+ sff8472_data);
+}
+
+/**
+ * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to write
+ * @eeprom_data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 eeprom_data)
+{
+ DEBUGFUNC("ixgbe_write_i2c_eeprom_generic");
+
+ return hw->phy.ops.write_i2c_byte(hw, byte_offset,
+ IXGBE_I2C_EEPROM_DEV_ADDR,
+ eeprom_data);
+}
+
+/**
+ * ixgbe_is_sfp_probe - Returns true if SFP is being detected
+ * @hw: pointer to hardware structure
+ * @offset: eeprom offset to be read
+ * @addr: I2C address to be read
+ */
+STATIC bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr)
+{
+ if (addr == IXGBE_I2C_EEPROM_DEV_ADDR &&
+ offset == IXGBE_SFF_IDENTIFIER &&
+ hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+ return true;
+ return false;
+}
+
+/**
+ * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ * @lock: true if to take and release semaphore
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+STATIC s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data, bool lock)
+{
+ s32 status;
+ u32 max_retry = 10;
+ u32 retry = 0;
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+ bool nack = 1;
+ *data = 0;
+
+ DEBUGFUNC("ixgbe_read_i2c_byte_generic");
+
+ if (hw->mac.type >= ixgbe_mac_X550)
+ max_retry = 3;
+ if (ixgbe_is_sfp_probe(hw, byte_offset, dev_addr))
+ max_retry = IXGBE_SFP_DETECT_RETRIES;
+
+ do {
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ ixgbe_i2c_start(hw);
+
+ /* Device Address and write indication */
+ status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ ixgbe_i2c_start(hw);
+
+ /* Device Address and read indication */
+ status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1));
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_clock_in_i2c_byte(hw, data);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_bit(hw, nack);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ ixgbe_i2c_stop(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ return IXGBE_SUCCESS;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ if (lock) {
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ msec_delay(100);
+ }
+ retry++;
+ if (retry < max_retry)
+ DEBUGOUT("I2C byte read error - Retrying.\n");
+ else
+ DEBUGOUT("I2C byte read error.\n");
+
+ } while (retry < max_retry);
+
+ return status;
+}
+
+/**
+ * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, true);
+}
+
+/**
+ * ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, false);
+}
+
+/**
+ * ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ * @lock: true if to take and release semaphore
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+STATIC s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data, bool lock)
+{
+ s32 status;
+ u32 max_retry = 1;
+ u32 retry = 0;
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+
+ DEBUGFUNC("ixgbe_write_i2c_byte_generic");
+
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) !=
+ IXGBE_SUCCESS)
+ return IXGBE_ERR_SWFW_SYNC;
+
+ do {
+ ixgbe_i2c_start(hw);
+
+ status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_byte(hw, data);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != IXGBE_SUCCESS)
+ goto fail;
+
+ ixgbe_i2c_stop(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ return IXGBE_SUCCESS;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ retry++;
+ if (retry < max_retry)
+ DEBUGOUT("I2C byte write error - Retrying.\n");
+ else
+ DEBUGOUT("I2C byte write error.\n");
+ } while (retry < max_retry);
+
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ return status;
+}
+
+/**
+ * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, true);
+}
+
+/**
+ * ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, false);
+}
+
+/**
+ * ixgbe_i2c_start - Sets I2C start condition
+ * @hw: pointer to hardware structure
+ *
+ * Sets I2C start condition (High -> Low on SDA while SCL is High)
+ * Set bit-bang mode on X550 hardware.
+ **/
+STATIC void ixgbe_i2c_start(struct ixgbe_hw *hw)
+{
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+ DEBUGFUNC("ixgbe_i2c_start");
+
+ i2cctl |= IXGBE_I2C_BB_EN_BY_MAC(hw);
+
+ /* Start condition must begin with data and clock high */
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Setup time for start condition (4.7us) */
+ usec_delay(IXGBE_I2C_T_SU_STA);
+
+ ixgbe_set_i2c_data(hw, &i2cctl, 0);
+
+ /* Hold time for start condition (4us) */
+ usec_delay(IXGBE_I2C_T_HD_STA);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us */
+ usec_delay(IXGBE_I2C_T_LOW);
+
+}
+
+/**
+ * ixgbe_i2c_stop - Sets I2C stop condition
+ * @hw: pointer to hardware structure
+ *
+ * Sets I2C stop condition (Low -> High on SDA while SCL is High)
+ * Disables bit-bang mode and negates data output enable on X550
+ * hardware.
+ **/
+STATIC void ixgbe_i2c_stop(struct ixgbe_hw *hw)
+{
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+ u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
+ u32 bb_en_bit = IXGBE_I2C_BB_EN_BY_MAC(hw);
+
+ DEBUGFUNC("ixgbe_i2c_stop");
+
+ /* Stop condition must begin with data low and clock high */
+ ixgbe_set_i2c_data(hw, &i2cctl, 0);
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Setup time for stop condition (4us) */
+ usec_delay(IXGBE_I2C_T_SU_STO);
+
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
+
+ /* bus free time between stop and start (4.7us)*/
+ usec_delay(IXGBE_I2C_T_BUF);
+
+ if (bb_en_bit || data_oe_bit || clk_oe_bit) {
+ i2cctl &= ~bb_en_bit;
+ i2cctl |= data_oe_bit | clk_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+}
+
+/**
+ * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
+ * @hw: pointer to hardware structure
+ * @data: data byte to clock in
+ *
+ * Clocks in one byte data via I2C data/clock
+ **/
+STATIC s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
+{
+ s32 i;
+ bool bit = 0;
+
+ DEBUGFUNC("ixgbe_clock_in_i2c_byte");
+
+ *data = 0;
+ for (i = 7; i >= 0; i--) {
+ ixgbe_clock_in_i2c_bit(hw, &bit);
+ *data |= bit << i;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
+ * @hw: pointer to hardware structure
+ * @data: data byte clocked out
+ *
+ * Clocks out one byte data via I2C data/clock
+ **/
+STATIC s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
+{
+ s32 status = IXGBE_SUCCESS;
+ s32 i;
+ u32 i2cctl;
+ bool bit;
+
+ DEBUGFUNC("ixgbe_clock_out_i2c_byte");
+
+ for (i = 7; i >= 0; i--) {
+ bit = (data >> i) & 0x1;
+ status = ixgbe_clock_out_i2c_bit(hw, bit);
+
+ if (status != IXGBE_SUCCESS)
+ break;
+ }
+
+ /* Release SDA line (set high) */
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+ i2cctl |= IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_i2c_ack - Polls for I2C ACK
+ * @hw: pointer to hardware structure
+ *
+ * Clocks in/out one bit via I2C data/clock
+ **/
+STATIC s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
+{
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+ s32 status = IXGBE_SUCCESS;
+ u32 i = 0;
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ u32 timeout = 10;
+ bool ack = 1;
+
+ DEBUGFUNC("ixgbe_get_i2c_ack");
+
+ if (data_oe_bit) {
+ i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+ i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Minimum high period of clock is 4us */
+ usec_delay(IXGBE_I2C_T_HIGH);
+
+ /* Poll for ACK. Note that ACK in I2C spec is
+ * transition from 1 to 0 */
+ for (i = 0; i < timeout; i++) {
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ ack = ixgbe_get_i2c_data(hw, &i2cctl);
+
+ usec_delay(1);
+ if (!ack)
+ break;
+ }
+
+ if (ack) {
+ DEBUGOUT("I2C ack was not received.\n");
+ status = IXGBE_ERR_I2C;
+ }
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us */
+ usec_delay(IXGBE_I2C_T_LOW);
+
+ return status;
+}
+
+/**
+ * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
+ * @hw: pointer to hardware structure
+ * @data: read data value
+ *
+ * Clocks in one bit via I2C data/clock
+ **/
+STATIC s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
+{
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+
+ DEBUGFUNC("ixgbe_clock_in_i2c_bit");
+
+ if (data_oe_bit) {
+ i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+ i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Minimum high period of clock is 4us */
+ usec_delay(IXGBE_I2C_T_HIGH);
+
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ *data = ixgbe_get_i2c_data(hw, &i2cctl);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us */
+ usec_delay(IXGBE_I2C_T_LOW);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
+ * @hw: pointer to hardware structure
+ * @data: data value to write
+ *
+ * Clocks out one bit via I2C data/clock
+ **/
+STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
+{
+ s32 status;
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+ DEBUGFUNC("ixgbe_clock_out_i2c_bit");
+
+ status = ixgbe_set_i2c_data(hw, &i2cctl, data);
+ if (status == IXGBE_SUCCESS) {
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Minimum high period of clock is 4us */
+ usec_delay(IXGBE_I2C_T_HIGH);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us.
+ * This also takes care of the data hold time.
+ */
+ usec_delay(IXGBE_I2C_T_LOW);
+ } else {
+ status = IXGBE_ERR_I2C;
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "I2C data was not set to %X\n", data);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_raise_i2c_clk - Raises the I2C SCL clock
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Raises the I2C clock line '0'->'1'
+ * Negates the I2C clock output enable on X550 hardware.
+ **/
+STATIC void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+ u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
+ u32 i = 0;
+ u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT;
+ u32 i2cctl_r = 0;
+
+ DEBUGFUNC("ixgbe_raise_i2c_clk");
+
+ if (clk_oe_bit) {
+ *i2cctl |= clk_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ }
+
+ for (i = 0; i < timeout; i++) {
+ *i2cctl |= IXGBE_I2C_CLK_OUT_BY_MAC(hw);
+
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ /* SCL rise time (1000ns) */
+ usec_delay(IXGBE_I2C_T_RISE);
+
+ i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ if (i2cctl_r & IXGBE_I2C_CLK_IN_BY_MAC(hw))
+ break;
+ }
+}
+
+/**
+ * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Lowers the I2C clock line '1'->'0'
+ * Asserts the I2C clock output enable on X550 hardware.
+ **/
+STATIC void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+ DEBUGFUNC("ixgbe_lower_i2c_clk");
+
+ *i2cctl &= ~(IXGBE_I2C_CLK_OUT_BY_MAC(hw));
+ *i2cctl &= ~IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
+
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* SCL fall time (300ns) */
+ usec_delay(IXGBE_I2C_T_FALL);
+}
+
+/**
+ * ixgbe_set_i2c_data - Sets the I2C data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ * @data: I2C data value (0 or 1) to set
+ *
+ * Sets the I2C data bit
+ * Asserts the I2C data output enable on X550 hardware.
+ **/
+STATIC s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
+{
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_set_i2c_data");
+
+ if (data)
+ *i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+ else
+ *i2cctl &= ~(IXGBE_I2C_DATA_OUT_BY_MAC(hw));
+ *i2cctl &= ~data_oe_bit;
+
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
+ usec_delay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);
+
+ if (!data) /* Can't verify data in this case */
+ return IXGBE_SUCCESS;
+ if (data_oe_bit) {
+ *i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ /* Verify data was set correctly */
+ *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ if (data != ixgbe_get_i2c_data(hw, i2cctl)) {
+ status = IXGBE_ERR_I2C;
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "Error - I2C data was not set to %X.\n",
+ data);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_i2c_data - Reads the I2C SDA data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Returns the I2C data bit value
+ * Negates the I2C data output enable on X550 hardware.
+ **/
+STATIC bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+ bool data;
+
+ DEBUGFUNC("ixgbe_get_i2c_data");
+
+ if (data_oe_bit) {
+ *i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(IXGBE_I2C_T_FALL);
+ }
+
+ if (*i2cctl & IXGBE_I2C_DATA_IN_BY_MAC(hw))
+ data = 1;
+ else
+ data = 0;
+
+ return data;
+}
+
+/**
+ * ixgbe_i2c_bus_clear - Clears the I2C bus
+ * @hw: pointer to hardware structure
+ *
+ * Clears the I2C bus by sending nine clock pulses.
+ * Used when data line is stuck low.
+ **/
+void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
+{
+ u32 i2cctl;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_i2c_bus_clear");
+
+ ixgbe_i2c_start(hw);
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
+
+ for (i = 0; i < 9; i++) {
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Min high period of clock is 4us */
+ usec_delay(IXGBE_I2C_T_HIGH);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Min low period of clock is 4.7us*/
+ usec_delay(IXGBE_I2C_T_LOW);
+ }
+
+ ixgbe_i2c_start(hw);
+
+ /* Put the i2c bus back to default state */
+ ixgbe_i2c_stop(hw);
+}
+
+/**
+ * ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
+ * @hw: pointer to hardware structure
+ *
+ * Checks if the LASI temp alarm status was triggered due to overtemp
+ **/
+s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 phy_data = 0;
+
+ DEBUGFUNC("ixgbe_tn_check_overtemp");
+
+ if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM)
+ goto out;
+
+ /* Check that the LASI temp alarm status was triggered */
+ hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_data);
+
+ if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM))
+ goto out;
+
+ status = IXGBE_ERR_OVERTEMP;
+ ERROR_REPORT1(IXGBE_ERROR_CAUTION, "Device over temperature");
+out:
+ return status;
+}
+
+/**
+ * ixgbe_set_copper_phy_power - Control power for copper phy
+ * @hw: pointer to hardware structure
+ * @on: true for on, false for off
+ */
+s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on)
+{
+ u32 status;
+ u16 reg;
+
+ if (!on && ixgbe_mng_present(hw))
+ return 0;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ &reg);
+ if (status)
+ return status;
+
+ if (on) {
+ reg &= ~IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
+ } else {
+ if (ixgbe_check_reset_blocked(hw))
+ return 0;
+ reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
+ }
+
+ status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ reg);
+ return status;
+}