1 files changed, 84 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index 11a9f334..72a941f9 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -573,6 +573,77 @@ int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout);
  */
 int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port);
 
+/**
+ * Acquire swfw semaphore lock for MDIO access
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (IXGBE_ERR_SWFW_SYNC) If sw/fw semaphore acquisition failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_lock(uint16_t port);
+
+/**
+ * Release swfw semaphore lock used for MDIO access
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlock(uint16_t port);
+
+/**
+ * Read PHY register using MDIO without MDIO lock
+ * The lock must be taken separately before calling this
+ * API
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param reg_addr
+ *   32 bit PHY Register
+ * @param dev_type
+ *   Used to define device base address
+ * @param phy_data
+ *   Pointer for reading PHY register data
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (IXGBE_ERR_PHY) If PHY read command failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlocked_read(uint16_t port, uint32_t reg_addr,
+				 uint32_t dev_type, uint16_t *phy_data);
+
+/**
+ * Write data to PHY register using without MDIO lock
+ * The lock must be taken separately before calling this
+ * API
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param reg_addr
+ *   32 bit PHY Register
+ * @param dev_type
+ *   Used to define device base address
+ * @param phy_data
+ *   Data to write to PHY register
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (IXGBE_ERR_PHY) If PHY read command failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlocked_write(uint16_t port, uint32_t reg_addr,
+				  uint32_t dev_type, uint16_t phy_data);
 
 /**
  * Response sent back to ixgbe driver from user app after callback
@@ -637,4 +708,17 @@ enum {
 	((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF &&  \
 	(x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM))
 
+/**
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param enable
+ *    0 to disable and nonzero to enable 'SBP' bit in FCTRL register
+ *    to receive all packets
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int __rte_experimental
+rte_pmd_ixgbe_upd_fctrl_sbp(uint16_t port, int enable);
 #endif /* _PMD_IXGBE_H_ */