diff options
Diffstat (limited to 'drivers/net/ixgbe/rte_pmd_ixgbe.h')
| -rw-r--r-- | drivers/net/ixgbe/rte_pmd_ixgbe.h | 245 |
1 files changed, 245 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h index c2fb8261..1f2b1bd7 100644 --- a/drivers/net/ixgbe/rte_pmd_ixgbe.h +++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h @@ -42,6 +42,20 @@ #include <rte_ethdev.h> /** + * Notify VF when PF link status changes. + * + * @param port + * The port identifier of the Ethernet device. + * @param vf + * VF id. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if *vf* invalid. + */ +int rte_pmd_ixgbe_ping_vf(uint8_t port, uint16_t vf); + +/** * Set the VF MAC address. * * @param port @@ -183,6 +197,237 @@ int rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on); /** + * Enable MACsec offload. + * + * @param port + * The port identifier of the Ethernet device. + * @param en + * 1 - Enable encryption (encrypt and add integrity signature). + * 0 - Disable encryption (only add integrity signature). + * @param rp + * 1 - Enable replay protection. + * 0 - Disable replay protection. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + */ +int rte_pmd_ixgbe_macsec_enable(uint8_t port, uint8_t en, uint8_t rp); + +/** + * Disable MACsec offload. + * + * @param port + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + */ +int rte_pmd_ixgbe_macsec_disable(uint8_t port); + +/** + * Configure Tx SC (Secure Connection). + * + * @param port + * The port identifier of the Ethernet device. + * @param mac + * The MAC address on the local side. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + */ +int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac); + +/** + * Configure Rx SC (Secure Connection). + * + * @param port + * The port identifier of the Ethernet device. + * @param mac + * The MAC address on the remote side. + * @param pi + * The PI (port identifier) on the remote side. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + */ +int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi); + +/** + * Enable Tx SA (Secure Association). + * + * @param port + * The port identifier of the Ethernet device. + * @param idx + * The SA to be enabled (0 or 1). + * @param an + * The association number on the local side. + * @param pn + * The packet number on the local side. + * @param key + * The key on the local side. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an, + uint32_t pn, uint8_t *key); + +/** + * Enable Rx SA (Secure Association). + * + * @param port + * The port identifier of the Ethernet device. + * @param idx + * The SA to be enabled (0 or 1) + * @param an + * The association number on the remote side. + * @param pn + * The packet number on the remote side. + * @param key + * The key on the remote side. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an, + uint32_t pn, uint8_t *key); + +/** +* Set RX L2 Filtering mode of a VF of an Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param rx_mask +* The RX mode mask, which is one or more of accepting Untagged Packets, +* packets that match the PFUTA table, Broadcast and Multicast Promiscuous. +* ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC, +* ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used +* in rx_mode. +* @param on +* 1 - Enable a VF RX mode. +* 0 - Disable a VF RX mode. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t on); + +/** +* Enable or disable a VF traffic receive of an Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param on +* 1 - Enable a VF traffic receive. +* 0 - Disable a VF traffic receive. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on); + +/** +* Enable or disable a VF traffic transmit of the Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param on +* 1 - Enable a VF traffic transmit. +* 0 - Disable a VF traffic transmit. +* @return +* - (0) if successful. +* - (-ENODEV) if *port_id* invalid. +* - (-ENOTSUP) if hardware doesn't support. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on); + +/** +* Enable/Disable hardware VF VLAN filtering by an Ethernet device of +* received VLAN packets tagged with a given VLAN Tag Identifier. +* +* @param port +* The port identifier of the Ethernet device. +* @param vlan +* The VLAN Tag Identifier whose filtering must be enabled or disabled. +* @param vf_mask +* Bitmap listing which VFs participate in the VLAN filtering. +* @param vlan_on +* 1 - Enable VFs VLAN filtering. +* 0 - Disable VFs VLAN filtering. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask, uint8_t vlan_on); + +/** + * Set the rate limitation for a vf on an Ethernet device. + * + * @param port + * The port identifier of the Ethernet device. + * @param vf + * VF id. + * @param tx_rate + * The tx rate allocated from the total link speed for this VF id. + * @param q_msk + * The queue mask which need to set the rate. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, uint64_t q_msk); + +/** + * Set all the TCs' bandwidth weight. + * + * The bw_weight means the percentage occupied by the TC. + * It can be taken as the relative min bandwidth setting. + * + * @param port + * The port identifier of the Ethernet device. + * @param tc_num + * Number of TCs. + * @param bw_weight + * An array of relative bandwidth weight for all the TCs. + * The summary of the bw_weight should be 100. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if bad parameter. + * - (-ENOTSUP) not supported by firmware. + */ +int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port, + uint8_t tc_num, + uint8_t *bw_weight); + +/** * Response sent back to ixgbe driver from user app after callback */ enum rte_pmd_ixgbe_mb_event_rsp { |