diff options
Diffstat (limited to 'drivers/net/ixgbe/rte_pmd_ixgbe.h')
| -rw-r--r-- | drivers/net/ixgbe/rte_pmd_ixgbe.h | 64 |
1 files changed, 34 insertions, 30 deletions
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h index d33c285d..81b18f87 100644 --- a/drivers/net/ixgbe/rte_pmd_ixgbe.h +++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h @@ -53,7 +53,7 @@ * - (-ENODEV) if *port* invalid. * - (-EINVAL) if *vf* invalid. */ -int rte_pmd_ixgbe_ping_vf(uint8_t port, uint16_t vf); +int rte_pmd_ixgbe_ping_vf(uint16_t port, uint16_t vf); /** * Set the VF MAC address. @@ -69,7 +69,7 @@ int rte_pmd_ixgbe_ping_vf(uint8_t port, uint16_t vf); * - (-ENODEV) if *port* invalid. * - (-EINVAL) if *vf* or *mac_addr* is invalid. */ -int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf, +int rte_pmd_ixgbe_set_vf_mac_addr(uint16_t port, uint16_t vf, struct ether_addr *mac_addr); /** @@ -87,7 +87,8 @@ int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf, * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); +int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint16_t port, uint16_t vf, + uint8_t on); /** * Enable/Disable VF MAC anti spoofing. @@ -104,7 +105,7 @@ int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); +int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint16_t port, uint16_t vf, uint8_t on); /** * Enable/Disable vf vlan insert @@ -122,7 +123,7 @@ int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, +int rte_pmd_ixgbe_set_vf_vlan_insert(uint16_t port, uint16_t vf, uint16_t vlan_id); /** @@ -139,7 +140,7 @@ int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on); +int rte_pmd_ixgbe_set_tx_loopback(uint16_t port, uint8_t on); /** * set all queues drop enable bit @@ -155,7 +156,7 @@ int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on); * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on); +int rte_pmd_ixgbe_set_all_queues_drop_en(uint16_t port, uint8_t on); /** * set drop enable bit in the VF split rx control register @@ -174,7 +175,7 @@ int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on); * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on); +int rte_pmd_ixgbe_set_vf_split_drop_en(uint16_t port, uint16_t vf, uint8_t on); /** * Enable/Disable vf vlan strip for all queues in a pool @@ -194,7 +195,7 @@ int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on); * - (-EINVAL) if bad parameter. */ int -rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on); +rte_pmd_ixgbe_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on); /** * Enable MACsec offload. @@ -212,7 +213,7 @@ rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on); * - (-ENODEV) if *port* invalid. * - (-ENOTSUP) if hardware doesn't support this feature. */ -int rte_pmd_ixgbe_macsec_enable(uint8_t port, uint8_t en, uint8_t rp); +int rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t rp); /** * Disable MACsec offload. @@ -224,7 +225,7 @@ int rte_pmd_ixgbe_macsec_enable(uint8_t port, uint8_t en, uint8_t rp); * - (-ENODEV) if *port* invalid. * - (-ENOTSUP) if hardware doesn't support this feature. */ -int rte_pmd_ixgbe_macsec_disable(uint8_t port); +int rte_pmd_ixgbe_macsec_disable(uint16_t port); /** * Configure Tx SC (Secure Connection). @@ -238,7 +239,7 @@ int rte_pmd_ixgbe_macsec_disable(uint8_t port); * - (-ENODEV) if *port* invalid. * - (-ENOTSUP) if hardware doesn't support this feature. */ -int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac); +int rte_pmd_ixgbe_macsec_config_txsc(uint16_t port, uint8_t *mac); /** * Configure Rx SC (Secure Connection). @@ -254,7 +255,7 @@ int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac); * - (-ENODEV) if *port* invalid. * - (-ENOTSUP) if hardware doesn't support this feature. */ -int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi); +int rte_pmd_ixgbe_macsec_config_rxsc(uint16_t port, uint8_t *mac, uint16_t pi); /** * Enable Tx SA (Secure Association). @@ -275,7 +276,7 @@ int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi); * - (-ENOTSUP) if hardware doesn't support this feature. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an, +int rte_pmd_ixgbe_macsec_select_txsa(uint16_t port, uint8_t idx, uint8_t an, uint32_t pn, uint8_t *key); /** @@ -297,7 +298,7 @@ int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an, * - (-ENOTSUP) if hardware doesn't support this feature. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an, +int rte_pmd_ixgbe_macsec_select_rxsa(uint16_t port, uint8_t idx, uint8_t an, uint32_t pn, uint8_t *key); /** @@ -323,7 +324,8 @@ int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an, * - (-EINVAL) if bad parameter. */ int -rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t on); +rte_pmd_ixgbe_set_vf_rxmode(uint16_t port, uint16_t vf, uint16_t rx_mask, + uint8_t on); /** * Enable or disable a VF traffic receive of an Ethernet device. @@ -342,7 +344,7 @@ rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t * - (-EINVAL) if bad parameter. */ int -rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on); +rte_pmd_ixgbe_set_vf_rx(uint16_t port, uint16_t vf, uint8_t on); /** * Enable or disable a VF traffic transmit of the Ethernet device. @@ -361,7 +363,7 @@ rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on); * - (-EINVAL) if bad parameter. */ int -rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on); +rte_pmd_ixgbe_set_vf_tx(uint16_t port, uint16_t vf, uint8_t on); /** * Enable/Disable hardware VF VLAN filtering by an Ethernet device of @@ -383,7 +385,8 @@ rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on); * - (-EINVAL) if bad parameter. */ int -rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask, uint8_t vlan_on); +rte_pmd_ixgbe_set_vf_vlan_filter(uint16_t port, uint16_t vlan, + uint64_t vf_mask, uint8_t vlan_on); /** * Set the rate limitation for a vf on an Ethernet device. @@ -402,7 +405,8 @@ rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask, * - (-ENODEV) if *port_id* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, uint64_t q_msk); +int rte_pmd_ixgbe_set_vf_rate_limit(uint16_t port, uint16_t vf, + uint16_t tx_rate, uint64_t q_msk); /** * Set all the TCs' bandwidth weight. @@ -423,7 +427,7 @@ int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, * - (-EINVAL) if bad parameter. * - (-ENOTSUP) not supported by firmware. */ -int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port, +int rte_pmd_ixgbe_set_tc_bw_alloc(uint16_t port, uint8_t tc_num, uint8_t *bw_weight); @@ -439,7 +443,7 @@ int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port, * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_init(uint8_t port); +int rte_pmd_ixgbe_bypass_init(uint16_t port); /** * Return bypass state. @@ -456,7 +460,7 @@ int rte_pmd_ixgbe_bypass_init(uint8_t port); * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_state_show(uint8_t port, uint32_t *state); +int rte_pmd_ixgbe_bypass_state_show(uint16_t port, uint32_t *state); /** * Set bypass state @@ -473,7 +477,7 @@ int rte_pmd_ixgbe_bypass_state_show(uint8_t port, uint32_t *state); * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_state_set(uint8_t port, uint32_t *new_state); +int rte_pmd_ixgbe_bypass_state_set(uint16_t port, uint32_t *new_state); /** * Return bypass state when given event occurs. @@ -497,7 +501,7 @@ int rte_pmd_ixgbe_bypass_state_set(uint8_t port, uint32_t *new_state); * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_event_show(uint8_t port, +int rte_pmd_ixgbe_bypass_event_show(uint16_t port, uint32_t event, uint32_t *state); @@ -523,7 +527,7 @@ int rte_pmd_ixgbe_bypass_event_show(uint8_t port, * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_event_store(uint8_t port, +int rte_pmd_ixgbe_bypass_event_store(uint16_t port, uint32_t event, uint32_t state); @@ -547,7 +551,7 @@ int rte_pmd_ixgbe_bypass_event_store(uint8_t port, * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port, uint32_t timeout); +int rte_pmd_ixgbe_bypass_wd_timeout_store(uint16_t port, uint32_t timeout); /** * Get bypass firmware version. @@ -561,7 +565,7 @@ int rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port, uint32_t timeout); * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_ver_show(uint8_t port, uint32_t *ver); +int rte_pmd_ixgbe_bypass_ver_show(uint16_t port, uint32_t *ver); /** * Return bypass watchdog timeout in seconds @@ -583,7 +587,7 @@ int rte_pmd_ixgbe_bypass_ver_show(uint8_t port, uint32_t *ver); * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout); +int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout); /** * Reset bypass watchdog timer @@ -595,7 +599,7 @@ int rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout); * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_bypass_wd_reset(uint8_t port); +int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port); /** |