summaryrefslogtreecommitdiffstats
path: root/drivers/net/mlx5/mlx5_ethdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/mlx5/mlx5_ethdev.c')
-rw-r--r--drivers/net/mlx5/mlx5_ethdev.c1282
1 files changed, 1282 insertions, 0 deletions
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
new file mode 100644
index 00000000..36b369e7
--- /dev/null
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -0,0 +1,1282 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2015 6WIND S.A.
+ * Copyright 2015 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stddef.h>
+#include <assert.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <dirent.h>
+#include <net/if.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <linux/if.h>
+#include <linux/ethtool.h>
+#include <linux/sockios.h>
+#include <fcntl.h>
+
+/* DPDK headers don't like -pedantic. */
+#ifdef PEDANTIC
+#pragma GCC diagnostic ignored "-pedantic"
+#endif
+#include <rte_atomic.h>
+#include <rte_ethdev.h>
+#include <rte_mbuf.h>
+#include <rte_common.h>
+#include <rte_interrupts.h>
+#include <rte_alarm.h>
+#include <rte_malloc.h>
+#ifdef PEDANTIC
+#pragma GCC diagnostic error "-pedantic"
+#endif
+
+#include "mlx5.h"
+#include "mlx5_rxtx.h"
+#include "mlx5_utils.h"
+
+/**
+ * Return private structure associated with an Ethernet device.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * Pointer to private structure.
+ */
+struct priv *
+mlx5_get_priv(struct rte_eth_dev *dev)
+{
+ struct mlx5_secondary_data *sd;
+
+ if (!mlx5_is_secondary())
+ return dev->data->dev_private;
+ sd = &mlx5_secondary_data[dev->data->port_id];
+ return sd->data.dev_private;
+}
+
+/**
+ * Check if running as a secondary process.
+ *
+ * @return
+ * Nonzero if running as a secondary process.
+ */
+inline int
+mlx5_is_secondary(void)
+{
+ return rte_eal_process_type() != RTE_PROC_PRIMARY;
+}
+
+/**
+ * Get interface name from private structure.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param[out] ifname
+ * Interface name output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+int
+priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE])
+{
+ DIR *dir;
+ struct dirent *dent;
+ unsigned int dev_type = 0;
+ unsigned int dev_port_prev = ~0u;
+ char match[IF_NAMESIZE] = "";
+
+ {
+ MKSTR(path, "%s/device/net", priv->ctx->device->ibdev_path);
+
+ dir = opendir(path);
+ if (dir == NULL)
+ return -1;
+ }
+ while ((dent = readdir(dir)) != NULL) {
+ char *name = dent->d_name;
+ FILE *file;
+ unsigned int dev_port;
+ int r;
+
+ if ((name[0] == '.') &&
+ ((name[1] == '\0') ||
+ ((name[1] == '.') && (name[2] == '\0'))))
+ continue;
+
+ MKSTR(path, "%s/device/net/%s/%s",
+ priv->ctx->device->ibdev_path, name,
+ (dev_type ? "dev_id" : "dev_port"));
+
+ file = fopen(path, "rb");
+ if (file == NULL) {
+ if (errno != ENOENT)
+ continue;
+ /*
+ * Switch to dev_id when dev_port does not exist as
+ * is the case with Linux kernel versions < 3.15.
+ */
+try_dev_id:
+ match[0] = '\0';
+ if (dev_type)
+ break;
+ dev_type = 1;
+ dev_port_prev = ~0u;
+ rewinddir(dir);
+ continue;
+ }
+ r = fscanf(file, (dev_type ? "%x" : "%u"), &dev_port);
+ fclose(file);
+ if (r != 1)
+ continue;
+ /*
+ * Switch to dev_id when dev_port returns the same value for
+ * all ports. May happen when using a MOFED release older than
+ * 3.0 with a Linux kernel >= 3.15.
+ */
+ if (dev_port == dev_port_prev)
+ goto try_dev_id;
+ dev_port_prev = dev_port;
+ if (dev_port == (priv->port - 1u))
+ snprintf(match, sizeof(match), "%s", name);
+ }
+ closedir(dir);
+ if (match[0] == '\0')
+ return -1;
+ strncpy(*ifname, match, sizeof(*ifname));
+ return 0;
+}
+
+/**
+ * Read from sysfs entry.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param[in] entry
+ * Entry name relative to sysfs path.
+ * @param[out] buf
+ * Data output buffer.
+ * @param size
+ * Buffer size.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_sysfs_read(const struct priv *priv, const char *entry,
+ char *buf, size_t size)
+{
+ char ifname[IF_NAMESIZE];
+ FILE *file;
+ int ret;
+ int err;
+
+ if (priv_get_ifname(priv, &ifname))
+ return -1;
+
+ MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
+ ifname, entry);
+
+ file = fopen(path, "rb");
+ if (file == NULL)
+ return -1;
+ ret = fread(buf, 1, size, file);
+ err = errno;
+ if (((size_t)ret < size) && (ferror(file)))
+ ret = -1;
+ else
+ ret = size;
+ fclose(file);
+ errno = err;
+ return ret;
+}
+
+/**
+ * Write to sysfs entry.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param[in] entry
+ * Entry name relative to sysfs path.
+ * @param[in] buf
+ * Data buffer.
+ * @param size
+ * Buffer size.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_sysfs_write(const struct priv *priv, const char *entry,
+ char *buf, size_t size)
+{
+ char ifname[IF_NAMESIZE];
+ FILE *file;
+ int ret;
+ int err;
+
+ if (priv_get_ifname(priv, &ifname))
+ return -1;
+
+ MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
+ ifname, entry);
+
+ file = fopen(path, "wb");
+ if (file == NULL)
+ return -1;
+ ret = fwrite(buf, 1, size, file);
+ err = errno;
+ if (((size_t)ret < size) || (ferror(file)))
+ ret = -1;
+ else
+ ret = size;
+ fclose(file);
+ errno = err;
+ return ret;
+}
+
+/**
+ * Get unsigned long sysfs property.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[in] name
+ * Entry name relative to sysfs path.
+ * @param[out] value
+ * Value output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_get_sysfs_ulong(struct priv *priv, const char *name, unsigned long *value)
+{
+ int ret;
+ unsigned long value_ret;
+ char value_str[32];
+
+ ret = priv_sysfs_read(priv, name, value_str, (sizeof(value_str) - 1));
+ if (ret == -1) {
+ DEBUG("cannot read %s value from sysfs: %s",
+ name, strerror(errno));
+ return -1;
+ }
+ value_str[ret] = '\0';
+ errno = 0;
+ value_ret = strtoul(value_str, NULL, 0);
+ if (errno) {
+ DEBUG("invalid %s value `%s': %s", name, value_str,
+ strerror(errno));
+ return -1;
+ }
+ *value = value_ret;
+ return 0;
+}
+
+/**
+ * Set unsigned long sysfs property.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[in] name
+ * Entry name relative to sysfs path.
+ * @param value
+ * Value to set.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_set_sysfs_ulong(struct priv *priv, const char *name, unsigned long value)
+{
+ int ret;
+ MKSTR(value_str, "%lu", value);
+
+ ret = priv_sysfs_write(priv, name, value_str, (sizeof(value_str) - 1));
+ if (ret == -1) {
+ DEBUG("cannot write %s `%s' (%lu) to sysfs: %s",
+ name, value_str, value, strerror(errno));
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * Perform ifreq ioctl() on associated Ethernet device.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param req
+ * Request number to pass to ioctl().
+ * @param[out] ifr
+ * Interface request structure output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+int
+priv_ifreq(const struct priv *priv, int req, struct ifreq *ifr)
+{
+ int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
+ int ret = -1;
+
+ if (sock == -1)
+ return ret;
+ if (priv_get_ifname(priv, &ifr->ifr_name) == 0)
+ ret = ioctl(sock, req, ifr);
+ close(sock);
+ return ret;
+}
+
+/**
+ * Get device MTU.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[out] mtu
+ * MTU value output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+int
+priv_get_mtu(struct priv *priv, uint16_t *mtu)
+{
+ unsigned long ulong_mtu;
+
+ if (priv_get_sysfs_ulong(priv, "mtu", &ulong_mtu) == -1)
+ return -1;
+ *mtu = ulong_mtu;
+ return 0;
+}
+
+/**
+ * Set device MTU.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param mtu
+ * MTU value to set.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_set_mtu(struct priv *priv, uint16_t mtu)
+{
+ return priv_set_sysfs_ulong(priv, "mtu", mtu);
+}
+
+/**
+ * Set device flags.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param keep
+ * Bitmask for flags that must remain untouched.
+ * @param flags
+ * Bitmask for flags to modify.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+int
+priv_set_flags(struct priv *priv, unsigned int keep, unsigned int flags)
+{
+ unsigned long tmp;
+
+ if (priv_get_sysfs_ulong(priv, "flags", &tmp) == -1)
+ return -1;
+ tmp &= keep;
+ tmp |= flags;
+ return priv_set_sysfs_ulong(priv, "flags", tmp);
+}
+
+/**
+ * Ethernet device configuration.
+ *
+ * Prepare the driver for a given number of TX and RX queues.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+dev_configure(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int rxqs_n = dev->data->nb_rx_queues;
+ unsigned int txqs_n = dev->data->nb_tx_queues;
+ unsigned int i;
+ unsigned int j;
+ unsigned int reta_idx_n;
+
+ priv->rss_hf = dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf;
+ priv->rxqs = (void *)dev->data->rx_queues;
+ priv->txqs = (void *)dev->data->tx_queues;
+ if (txqs_n != priv->txqs_n) {
+ INFO("%p: TX queues number update: %u -> %u",
+ (void *)dev, priv->txqs_n, txqs_n);
+ priv->txqs_n = txqs_n;
+ }
+ if (rxqs_n > priv->ind_table_max_size) {
+ ERROR("cannot handle this many RX queues (%u)", rxqs_n);
+ return EINVAL;
+ }
+ if (rxqs_n == priv->rxqs_n)
+ return 0;
+ INFO("%p: RX queues number update: %u -> %u",
+ (void *)dev, priv->rxqs_n, rxqs_n);
+ priv->rxqs_n = rxqs_n;
+ /* If the requested number of RX queues is not a power of two, use the
+ * maximum indirection table size for better balancing.
+ * The result is always rounded to the next power of two. */
+ reta_idx_n = (1 << log2above((rxqs_n & (rxqs_n - 1)) ?
+ priv->ind_table_max_size :
+ rxqs_n));
+ if (priv_rss_reta_index_resize(priv, reta_idx_n))
+ return ENOMEM;
+ /* When the number of RX queues is not a power of two, the remaining
+ * table entries are padded with reused WQs and hashes are not spread
+ * uniformly. */
+ for (i = 0, j = 0; (i != reta_idx_n); ++i) {
+ (*priv->reta_idx)[i] = j;
+ if (++j == rxqs_n)
+ j = 0;
+ }
+ return 0;
+}
+
+/**
+ * DPDK callback for Ethernet device configuration.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+int
+mlx5_dev_configure(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ if (mlx5_is_secondary())
+ return -E_RTE_SECONDARY;
+
+ priv_lock(priv);
+ ret = dev_configure(dev);
+ assert(ret >= 0);
+ priv_unlock(priv);
+ return -ret;
+}
+
+/**
+ * DPDK callback to get information about the device.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] info
+ * Info structure output buffer.
+ */
+void
+mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
+{
+ struct priv *priv = mlx5_get_priv(dev);
+ unsigned int max;
+ char ifname[IF_NAMESIZE];
+
+ priv_lock(priv);
+ /* FIXME: we should ask the device for these values. */
+ info->min_rx_bufsize = 32;
+ info->max_rx_pktlen = 65536;
+ /*
+ * Since we need one CQ per QP, the limit is the minimum number
+ * between the two values.
+ */
+ max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ?
+ priv->device_attr.max_qp : priv->device_attr.max_cq);
+ /* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
+ if (max >= 65535)
+ max = 65535;
+ info->max_rx_queues = max;
+ info->max_tx_queues = max;
+ info->max_mac_addrs = RTE_DIM(priv->mac);
+ info->rx_offload_capa =
+ (priv->hw_csum ?
+ (DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM) :
+ 0);
+ info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT;
+ if (priv->hw_csum)
+ info->tx_offload_capa |=
+ (DEV_TX_OFFLOAD_IPV4_CKSUM |
+ DEV_TX_OFFLOAD_UDP_CKSUM |
+ DEV_TX_OFFLOAD_TCP_CKSUM);
+ if (priv_get_ifname(priv, &ifname) == 0)
+ info->if_index = if_nametoindex(ifname);
+ /* FIXME: RETA update/query API expects the callee to know the size of
+ * the indirection table, for this PMD the size varies depending on
+ * the number of RX queues, it becomes impossible to find the correct
+ * size if it is not fixed.
+ * The API should be updated to solve this problem. */
+ info->reta_size = priv->ind_table_max_size;
+ info->speed_capa =
+ ETH_LINK_SPEED_1G |
+ ETH_LINK_SPEED_10G |
+ ETH_LINK_SPEED_20G |
+ ETH_LINK_SPEED_25G |
+ ETH_LINK_SPEED_40G |
+ ETH_LINK_SPEED_50G |
+ ETH_LINK_SPEED_56G |
+ ETH_LINK_SPEED_100G;
+ priv_unlock(priv);
+}
+
+const uint32_t *
+mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev)
+{
+ static const uint32_t ptypes[] = {
+ /* refers to rxq_cq_to_pkt_type() */
+ RTE_PTYPE_L3_IPV4,
+ RTE_PTYPE_L3_IPV6,
+ RTE_PTYPE_INNER_L3_IPV4,
+ RTE_PTYPE_INNER_L3_IPV6,
+ RTE_PTYPE_UNKNOWN
+
+ };
+
+ if (dev->rx_pkt_burst == mlx5_rx_burst ||
+ dev->rx_pkt_burst == mlx5_rx_burst_sp)
+ return ptypes;
+ return NULL;
+}
+
+/**
+ * DPDK callback to retrieve physical link information (unlocked version).
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ * Wait for request completion (ignored).
+ */
+static int
+mlx5_link_update_unlocked(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct priv *priv = mlx5_get_priv(dev);
+ struct ethtool_cmd edata = {
+ .cmd = ETHTOOL_GSET
+ };
+ struct ifreq ifr;
+ struct rte_eth_link dev_link;
+ int link_speed = 0;
+
+ (void)wait_to_complete;
+ if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
+ WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno));
+ return -1;
+ }
+ memset(&dev_link, 0, sizeof(dev_link));
+ dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
+ (ifr.ifr_flags & IFF_RUNNING));
+ ifr.ifr_data = &edata;
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ WARN("ioctl(SIOCETHTOOL, ETHTOOL_GSET) failed: %s",
+ strerror(errno));
+ return -1;
+ }
+ link_speed = ethtool_cmd_speed(&edata);
+ if (link_speed == -1)
+ dev_link.link_speed = 0;
+ else
+ dev_link.link_speed = link_speed;
+ dev_link.link_duplex = ((edata.duplex == DUPLEX_HALF) ?
+ ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
+ dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
+ ETH_LINK_SPEED_FIXED);
+ if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
+ /* Link status changed. */
+ dev->data->dev_link = dev_link;
+ return 0;
+ }
+ /* Link status is still the same. */
+ return -1;
+}
+
+/**
+ * DPDK callback to retrieve physical link information.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ * Wait for request completion (ignored).
+ */
+int
+mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct priv *priv = mlx5_get_priv(dev);
+ int ret;
+
+ priv_lock(priv);
+ ret = mlx5_link_update_unlocked(dev, wait_to_complete);
+ priv_unlock(priv);
+ return ret;
+}
+
+/**
+ * DPDK callback to change the MTU.
+ *
+ * Setting the MTU affects hardware MRU (packets larger than the MTU cannot be
+ * received). Use this as a hint to enable/disable scattered packets support
+ * and improve performance when not needed.
+ * Since failure is not an option, reconfiguring queues on the fly is not
+ * recommended.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param in_mtu
+ * New MTU.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+int
+mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret = 0;
+ unsigned int i;
+ uint16_t (*rx_func)(void *, struct rte_mbuf **, uint16_t) =
+ mlx5_rx_burst;
+
+ if (mlx5_is_secondary())
+ return -E_RTE_SECONDARY;
+
+ priv_lock(priv);
+ /* Set kernel interface MTU first. */
+ if (priv_set_mtu(priv, mtu)) {
+ ret = errno;
+ WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
+ strerror(ret));
+ goto out;
+ } else
+ DEBUG("adapter port %u MTU set to %u", priv->port, mtu);
+ priv->mtu = mtu;
+ /* Temporarily replace RX handler with a fake one, assuming it has not
+ * been copied elsewhere. */
+ dev->rx_pkt_burst = removed_rx_burst;
+ /* Make sure everyone has left mlx5_rx_burst() and uses
+ * removed_rx_burst() instead. */
+ rte_wmb();
+ usleep(1000);
+ /* Reconfigure each RX queue. */
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ struct rxq *rxq = (*priv->rxqs)[i];
+ unsigned int max_frame_len;
+ int sp;
+
+ if (rxq == NULL)
+ continue;
+ /* Calculate new maximum frame length according to MTU and
+ * toggle scattered support (sp) if necessary. */
+ max_frame_len = (priv->mtu + ETHER_HDR_LEN +
+ (ETHER_MAX_VLAN_FRAME_LEN - ETHER_MAX_LEN));
+ sp = (max_frame_len > (rxq->mb_len - RTE_PKTMBUF_HEADROOM));
+ /* Provide new values to rxq_setup(). */
+ dev->data->dev_conf.rxmode.jumbo_frame = sp;
+ dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame_len;
+ ret = rxq_rehash(dev, rxq);
+ if (ret) {
+ /* Force SP RX if that queue requires it and abort. */
+ if (rxq->sp)
+ rx_func = mlx5_rx_burst_sp;
+ break;
+ }
+ /* Scattered burst function takes priority. */
+ if (rxq->sp)
+ rx_func = mlx5_rx_burst_sp;
+ }
+ /* Burst functions can now be called again. */
+ rte_wmb();
+ dev->rx_pkt_burst = rx_func;
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * DPDK callback to get flow control status.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] fc_conf
+ * Flow control output buffer.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+int
+mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ifreq ifr;
+ struct ethtool_pauseparam ethpause = {
+ .cmd = ETHTOOL_GPAUSEPARAM
+ };
+ int ret;
+
+ if (mlx5_is_secondary())
+ return -E_RTE_SECONDARY;
+
+ ifr.ifr_data = &ethpause;
+ priv_lock(priv);
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ ret = errno;
+ WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
+ " failed: %s",
+ strerror(ret));
+ goto out;
+ }
+
+ fc_conf->autoneg = ethpause.autoneg;
+ if (ethpause.rx_pause && ethpause.tx_pause)
+ fc_conf->mode = RTE_FC_FULL;
+ else if (ethpause.rx_pause)
+ fc_conf->mode = RTE_FC_RX_PAUSE;
+ else if (ethpause.tx_pause)
+ fc_conf->mode = RTE_FC_TX_PAUSE;
+ else
+ fc_conf->mode = RTE_FC_NONE;
+ ret = 0;
+
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * DPDK callback to modify flow control parameters.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[in] fc_conf
+ * Flow control parameters.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+int
+mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ifreq ifr;
+ struct ethtool_pauseparam ethpause = {
+ .cmd = ETHTOOL_SPAUSEPARAM
+ };
+ int ret;
+
+ if (mlx5_is_secondary())
+ return -E_RTE_SECONDARY;
+
+ ifr.ifr_data = &ethpause;
+ ethpause.autoneg = fc_conf->autoneg;
+ if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+ (fc_conf->mode & RTE_FC_RX_PAUSE))
+ ethpause.rx_pause = 1;
+ else
+ ethpause.rx_pause = 0;
+
+ if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+ (fc_conf->mode & RTE_FC_TX_PAUSE))
+ ethpause.tx_pause = 1;
+ else
+ ethpause.tx_pause = 0;
+
+ priv_lock(priv);
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ ret = errno;
+ WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
+ " failed: %s",
+ strerror(ret));
+ goto out;
+ }
+ ret = 0;
+
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * Get PCI information from struct ibv_device.
+ *
+ * @param device
+ * Pointer to Ethernet device structure.
+ * @param[out] pci_addr
+ * PCI bus address output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+int
+mlx5_ibv_device_to_pci_addr(const struct ibv_device *device,
+ struct rte_pci_addr *pci_addr)
+{
+ FILE *file;
+ char line[32];
+ MKSTR(path, "%s/device/uevent", device->ibdev_path);
+
+ file = fopen(path, "rb");
+ if (file == NULL)
+ return -1;
+ while (fgets(line, sizeof(line), file) == line) {
+ size_t len = strlen(line);
+ int ret;
+
+ /* Truncate long lines. */
+ if (len == (sizeof(line) - 1))
+ while (line[(len - 1)] != '\n') {
+ ret = fgetc(file);
+ if (ret == EOF)
+ break;
+ line[(len - 1)] = ret;
+ }
+ /* Extract information. */
+ if (sscanf(line,
+ "PCI_SLOT_NAME="
+ "%" SCNx16 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n",
+ &pci_addr->domain,
+ &pci_addr->bus,
+ &pci_addr->devid,
+ &pci_addr->function) == 4) {
+ ret = 0;
+ break;
+ }
+ }
+ fclose(file);
+ return 0;
+}
+
+/**
+ * Link status handler.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param dev
+ * Pointer to the rte_eth_dev structure.
+ *
+ * @return
+ * Nonzero if the callback process can be called immediately.
+ */
+static int
+priv_dev_link_status_handler(struct priv *priv, struct rte_eth_dev *dev)
+{
+ struct ibv_async_event event;
+ int port_change = 0;
+ int ret = 0;
+
+ /* Read all message and acknowledge them. */
+ for (;;) {
+ if (ibv_get_async_event(priv->ctx, &event))
+ break;
+
+ if (event.event_type == IBV_EVENT_PORT_ACTIVE ||
+ event.event_type == IBV_EVENT_PORT_ERR)
+ port_change = 1;
+ else
+ DEBUG("event type %d on port %d not handled",
+ event.event_type, event.element.port_num);
+ ibv_ack_async_event(&event);
+ }
+
+ if (port_change ^ priv->pending_alarm) {
+ struct rte_eth_link *link = &dev->data->dev_link;
+
+ priv->pending_alarm = 0;
+ mlx5_link_update_unlocked(dev, 0);
+ if (((link->link_speed == 0) && link->link_status) ||
+ ((link->link_speed != 0) && !link->link_status)) {
+ /* Inconsistent status, check again later. */
+ priv->pending_alarm = 1;
+ rte_eal_alarm_set(MLX5_ALARM_TIMEOUT_US,
+ mlx5_dev_link_status_handler,
+ dev);
+ } else
+ ret = 1;
+ }
+ return ret;
+}
+
+/**
+ * Handle delayed link status event.
+ *
+ * @param arg
+ * Registered argument.
+ */
+void
+mlx5_dev_link_status_handler(void *arg)
+{
+ struct rte_eth_dev *dev = arg;
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ priv_lock(priv);
+ assert(priv->pending_alarm == 1);
+ ret = priv_dev_link_status_handler(priv, dev);
+ priv_unlock(priv);
+ if (ret)
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC);
+}
+
+/**
+ * Handle interrupts from the NIC.
+ *
+ * @param[in] intr_handle
+ * Interrupt handler.
+ * @param cb_arg
+ * Callback argument.
+ */
+void
+mlx5_dev_interrupt_handler(struct rte_intr_handle *intr_handle, void *cb_arg)
+{
+ struct rte_eth_dev *dev = cb_arg;
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ (void)intr_handle;
+ priv_lock(priv);
+ ret = priv_dev_link_status_handler(priv, dev);
+ priv_unlock(priv);
+ if (ret)
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC);
+}
+
+/**
+ * Uninstall interrupt handler.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param dev
+ * Pointer to the rte_eth_dev structure.
+ */
+void
+priv_dev_interrupt_handler_uninstall(struct priv *priv, struct rte_eth_dev *dev)
+{
+ if (!dev->data->dev_conf.intr_conf.lsc)
+ return;
+ rte_intr_callback_unregister(&priv->intr_handle,
+ mlx5_dev_interrupt_handler,
+ dev);
+ if (priv->pending_alarm)
+ rte_eal_alarm_cancel(mlx5_dev_link_status_handler, dev);
+ priv->pending_alarm = 0;
+ priv->intr_handle.fd = 0;
+ priv->intr_handle.type = 0;
+}
+
+/**
+ * Install interrupt handler.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param dev
+ * Pointer to the rte_eth_dev structure.
+ */
+void
+priv_dev_interrupt_handler_install(struct priv *priv, struct rte_eth_dev *dev)
+{
+ int rc, flags;
+
+ if (!dev->data->dev_conf.intr_conf.lsc)
+ return;
+ assert(priv->ctx->async_fd > 0);
+ flags = fcntl(priv->ctx->async_fd, F_GETFL);
+ rc = fcntl(priv->ctx->async_fd, F_SETFL, flags | O_NONBLOCK);
+ if (rc < 0) {
+ INFO("failed to change file descriptor async event queue");
+ dev->data->dev_conf.intr_conf.lsc = 0;
+ } else {
+ priv->intr_handle.fd = priv->ctx->async_fd;
+ priv->intr_handle.type = RTE_INTR_HANDLE_EXT;
+ rte_intr_callback_register(&priv->intr_handle,
+ mlx5_dev_interrupt_handler,
+ dev);
+ }
+}
+
+/**
+ * Change the link state (UP / DOWN).
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param up
+ * Nonzero for link up, otherwise link down.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+priv_set_link(struct priv *priv, int up)
+{
+ struct rte_eth_dev *dev = priv->dev;
+ int err;
+ unsigned int i;
+
+ if (up) {
+ err = priv_set_flags(priv, ~IFF_UP, IFF_UP);
+ if (err)
+ return err;
+ for (i = 0; i < priv->rxqs_n; i++)
+ if ((*priv->rxqs)[i]->sp)
+ break;
+ /* Check if an sp queue exists.
+ * Note: Some old frames might be received.
+ */
+ if (i == priv->rxqs_n)
+ dev->rx_pkt_burst = mlx5_rx_burst;
+ else
+ dev->rx_pkt_burst = mlx5_rx_burst_sp;
+ dev->tx_pkt_burst = mlx5_tx_burst;
+ } else {
+ err = priv_set_flags(priv, ~IFF_UP, ~IFF_UP);
+ if (err)
+ return err;
+ dev->rx_pkt_burst = removed_rx_burst;
+ dev->tx_pkt_burst = removed_tx_burst;
+ }
+ return 0;
+}
+
+/**
+ * DPDK callback to bring the link DOWN.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+int
+mlx5_set_link_down(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ int err;
+
+ priv_lock(priv);
+ err = priv_set_link(priv, 0);
+ priv_unlock(priv);
+ return err;
+}
+
+/**
+ * DPDK callback to bring the link UP.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+int
+mlx5_set_link_up(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ int err;
+
+ priv_lock(priv);
+ err = priv_set_link(priv, 1);
+ priv_unlock(priv);
+ return err;
+}
+
+/**
+ * Configure secondary process queues from a private data pointer (primary
+ * or secondary) and update burst callbacks. Can take place only once.
+ *
+ * All queues must have been previously created by the primary process to
+ * avoid undefined behavior.
+ *
+ * @param priv
+ * Private data pointer from either primary or secondary process.
+ *
+ * @return
+ * Private data pointer from secondary process, NULL in case of error.
+ */
+struct priv *
+mlx5_secondary_data_setup(struct priv *priv)
+{
+ unsigned int port_id = 0;
+ struct mlx5_secondary_data *sd;
+ void **tx_queues;
+ void **rx_queues;
+ unsigned int nb_tx_queues;
+ unsigned int nb_rx_queues;
+ unsigned int i;
+
+ /* priv must be valid at this point. */
+ assert(priv != NULL);
+ /* priv->dev must also be valid but may point to local memory from
+ * another process, possibly with the same address and must not
+ * be dereferenced yet. */
+ assert(priv->dev != NULL);
+ /* Determine port ID by finding out where priv comes from. */
+ while (1) {
+ sd = &mlx5_secondary_data[port_id];
+ rte_spinlock_lock(&sd->lock);
+ /* Primary process? */
+ if (sd->primary_priv == priv)
+ break;
+ /* Secondary process? */
+ if (sd->data.dev_private == priv)
+ break;
+ rte_spinlock_unlock(&sd->lock);
+ if (++port_id == RTE_DIM(mlx5_secondary_data))
+ port_id = 0;
+ }
+ /* Switch to secondary private structure. If private data has already
+ * been updated by another thread, there is nothing else to do. */
+ priv = sd->data.dev_private;
+ if (priv->dev->data == &sd->data)
+ goto end;
+ /* Sanity checks. Secondary private structure is supposed to point
+ * to local eth_dev, itself still pointing to the shared device data
+ * structure allocated by the primary process. */
+ assert(sd->shared_dev_data != &sd->data);
+ assert(sd->data.nb_tx_queues == 0);
+ assert(sd->data.tx_queues == NULL);
+ assert(sd->data.nb_rx_queues == 0);
+ assert(sd->data.rx_queues == NULL);
+ assert(priv != sd->primary_priv);
+ assert(priv->dev->data == sd->shared_dev_data);
+ assert(priv->txqs_n == 0);
+ assert(priv->txqs == NULL);
+ assert(priv->rxqs_n == 0);
+ assert(priv->rxqs == NULL);
+ nb_tx_queues = sd->shared_dev_data->nb_tx_queues;
+ nb_rx_queues = sd->shared_dev_data->nb_rx_queues;
+ /* Allocate local storage for queues. */
+ tx_queues = rte_zmalloc("secondary ethdev->tx_queues",
+ sizeof(sd->data.tx_queues[0]) * nb_tx_queues,
+ RTE_CACHE_LINE_SIZE);
+ rx_queues = rte_zmalloc("secondary ethdev->rx_queues",
+ sizeof(sd->data.rx_queues[0]) * nb_rx_queues,
+ RTE_CACHE_LINE_SIZE);
+ if (tx_queues == NULL || rx_queues == NULL)
+ goto error;
+ /* Lock to prevent control operations during setup. */
+ priv_lock(priv);
+ /* TX queues. */
+ for (i = 0; i != nb_tx_queues; ++i) {
+ struct txq *primary_txq = (*sd->primary_priv->txqs)[i];
+ struct txq *txq;
+
+ if (primary_txq == NULL)
+ continue;
+ txq = rte_calloc_socket("TXQ", 1, sizeof(*txq), 0,
+ primary_txq->socket);
+ if (txq != NULL) {
+ if (txq_setup(priv->dev,
+ txq,
+ primary_txq->elts_n * MLX5_PMD_SGE_WR_N,
+ primary_txq->socket,
+ NULL) == 0) {
+ txq->stats.idx = primary_txq->stats.idx;
+ tx_queues[i] = txq;
+ continue;
+ }
+ rte_free(txq);
+ }
+ while (i) {
+ txq = tx_queues[--i];
+ txq_cleanup(txq);
+ rte_free(txq);
+ }
+ goto error;
+ }
+ /* RX queues. */
+ for (i = 0; i != nb_rx_queues; ++i) {
+ struct rxq *primary_rxq = (*sd->primary_priv->rxqs)[i];
+
+ if (primary_rxq == NULL)
+ continue;
+ /* Not supported yet. */
+ rx_queues[i] = NULL;
+ }
+ /* Update everything. */
+ priv->txqs = (void *)tx_queues;
+ priv->txqs_n = nb_tx_queues;
+ priv->rxqs = (void *)rx_queues;
+ priv->rxqs_n = nb_rx_queues;
+ sd->data.rx_queues = rx_queues;
+ sd->data.tx_queues = tx_queues;
+ sd->data.nb_rx_queues = nb_rx_queues;
+ sd->data.nb_tx_queues = nb_tx_queues;
+ sd->data.dev_link = sd->shared_dev_data->dev_link;
+ sd->data.mtu = sd->shared_dev_data->mtu;
+ memcpy(sd->data.rx_queue_state, sd->shared_dev_data->rx_queue_state,
+ sizeof(sd->data.rx_queue_state));
+ memcpy(sd->data.tx_queue_state, sd->shared_dev_data->tx_queue_state,
+ sizeof(sd->data.tx_queue_state));
+ sd->data.dev_flags = sd->shared_dev_data->dev_flags;
+ /* Use local data from now on. */
+ rte_mb();
+ priv->dev->data = &sd->data;
+ rte_mb();
+ priv->dev->tx_pkt_burst = mlx5_tx_burst;
+ priv->dev->rx_pkt_burst = removed_rx_burst;
+ priv_unlock(priv);
+end:
+ /* More sanity checks. */
+ assert(priv->dev->tx_pkt_burst == mlx5_tx_burst);
+ assert(priv->dev->rx_pkt_burst == removed_rx_burst);
+ assert(priv->dev->data == &sd->data);
+ rte_spinlock_unlock(&sd->lock);
+ return priv;
+error:
+ priv_unlock(priv);
+ rte_free(tx_queues);
+ rte_free(rx_queues);
+ rte_spinlock_unlock(&sd->lock);
+ return NULL;
+}