aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/sfc/base/ef10_nic.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sfc/base/ef10_nic.c')
-rw-r--r--drivers/net/sfc/base/ef10_nic.c1780
1 files changed, 1780 insertions, 0 deletions
diff --git a/drivers/net/sfc/base/ef10_nic.c b/drivers/net/sfc/base/ef10_nic.c
new file mode 100644
index 00000000..aac2679c
--- /dev/null
+++ b/drivers/net/sfc/base/ef10_nic.c
@@ -0,0 +1,1780 @@
+/*
+ * Copyright (c) 2012-2016 Solarflare Communications Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * The views and conclusions contained in the software and documentation are
+ * those of the authors and should not be interpreted as representing official
+ * policies, either expressed or implied, of the FreeBSD Project.
+ */
+
+#include "efx.h"
+#include "efx_impl.h"
+#if EFSYS_OPT_MON_MCDI
+#include "mcdi_mon.h"
+#endif
+
+#if EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD
+
+#include "ef10_tlv_layout.h"
+
+ __checkReturn efx_rc_t
+efx_mcdi_get_port_assignment(
+ __in efx_nic_t *enp,
+ __out uint32_t *portp)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_GET_PORT_ASSIGNMENT_IN_LEN,
+ MC_CMD_GET_PORT_ASSIGNMENT_OUT_LEN)];
+ efx_rc_t rc;
+
+ EFSYS_ASSERT(enp->en_family == EFX_FAMILY_HUNTINGTON ||
+ enp->en_family == EFX_FAMILY_MEDFORD);
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_GET_PORT_ASSIGNMENT;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_GET_PORT_ASSIGNMENT_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_GET_PORT_ASSIGNMENT_OUT_LEN;
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ if (req.emr_out_length_used < MC_CMD_GET_PORT_ASSIGNMENT_OUT_LEN) {
+ rc = EMSGSIZE;
+ goto fail2;
+ }
+
+ *portp = MCDI_OUT_DWORD(req, GET_PORT_ASSIGNMENT_OUT_PORT);
+
+ return (0);
+
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+efx_mcdi_get_port_modes(
+ __in efx_nic_t *enp,
+ __out uint32_t *modesp,
+ __out_opt uint32_t *current_modep)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_GET_PORT_MODES_IN_LEN,
+ MC_CMD_GET_PORT_MODES_OUT_LEN)];
+ efx_rc_t rc;
+
+ EFSYS_ASSERT(enp->en_family == EFX_FAMILY_HUNTINGTON ||
+ enp->en_family == EFX_FAMILY_MEDFORD);
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_GET_PORT_MODES;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_GET_PORT_MODES_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_GET_PORT_MODES_OUT_LEN;
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ /*
+ * Require only Modes and DefaultMode fields, unless the current mode
+ * was requested (CurrentMode field was added for Medford).
+ */
+ if (req.emr_out_length_used <
+ MC_CMD_GET_PORT_MODES_OUT_CURRENT_MODE_OFST) {
+ rc = EMSGSIZE;
+ goto fail2;
+ }
+ if ((current_modep != NULL) && (req.emr_out_length_used <
+ MC_CMD_GET_PORT_MODES_OUT_CURRENT_MODE_OFST + 4)) {
+ rc = EMSGSIZE;
+ goto fail3;
+ }
+
+ *modesp = MCDI_OUT_DWORD(req, GET_PORT_MODES_OUT_MODES);
+
+ if (current_modep != NULL) {
+ *current_modep = MCDI_OUT_DWORD(req,
+ GET_PORT_MODES_OUT_CURRENT_MODE);
+ }
+
+ return (0);
+
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+ef10_nic_get_port_mode_bandwidth(
+ __in uint32_t port_mode,
+ __out uint32_t *bandwidth_mbpsp)
+{
+ uint32_t bandwidth;
+ efx_rc_t rc;
+
+ switch (port_mode) {
+ case TLV_PORT_MODE_10G:
+ bandwidth = 10000;
+ break;
+ case TLV_PORT_MODE_10G_10G:
+ bandwidth = 10000 * 2;
+ break;
+ case TLV_PORT_MODE_10G_10G_10G_10G:
+ case TLV_PORT_MODE_10G_10G_10G_10G_Q:
+ case TLV_PORT_MODE_10G_10G_10G_10G_Q1_Q2:
+ case TLV_PORT_MODE_10G_10G_10G_10G_Q2:
+ bandwidth = 10000 * 4;
+ break;
+ case TLV_PORT_MODE_40G:
+ bandwidth = 40000;
+ break;
+ case TLV_PORT_MODE_40G_40G:
+ bandwidth = 40000 * 2;
+ break;
+ case TLV_PORT_MODE_40G_10G_10G:
+ case TLV_PORT_MODE_10G_10G_40G:
+ bandwidth = 40000 + (10000 * 2);
+ break;
+ default:
+ rc = EINVAL;
+ goto fail1;
+ }
+
+ *bandwidth_mbpsp = bandwidth;
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+static __checkReturn efx_rc_t
+efx_mcdi_vadaptor_alloc(
+ __in efx_nic_t *enp,
+ __in uint32_t port_id)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_VADAPTOR_ALLOC_IN_LEN,
+ MC_CMD_VADAPTOR_ALLOC_OUT_LEN)];
+ efx_rc_t rc;
+
+ EFSYS_ASSERT3U(enp->en_vport_id, ==, EVB_PORT_ID_NULL);
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_VADAPTOR_ALLOC;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_VADAPTOR_ALLOC_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_VADAPTOR_ALLOC_OUT_LEN;
+
+ MCDI_IN_SET_DWORD(req, VADAPTOR_ALLOC_IN_UPSTREAM_PORT_ID, port_id);
+ MCDI_IN_POPULATE_DWORD_1(req, VADAPTOR_ALLOC_IN_FLAGS,
+ VADAPTOR_ALLOC_IN_FLAG_PERMIT_SET_MAC_WHEN_FILTERS_INSTALLED,
+ enp->en_nic_cfg.enc_allow_set_mac_with_installed_filters ? 1 : 0);
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+static __checkReturn efx_rc_t
+efx_mcdi_vadaptor_free(
+ __in efx_nic_t *enp,
+ __in uint32_t port_id)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_VADAPTOR_FREE_IN_LEN,
+ MC_CMD_VADAPTOR_FREE_OUT_LEN)];
+ efx_rc_t rc;
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_VADAPTOR_FREE;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_VADAPTOR_FREE_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_VADAPTOR_FREE_OUT_LEN;
+
+ MCDI_IN_SET_DWORD(req, VADAPTOR_FREE_IN_UPSTREAM_PORT_ID, port_id);
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+efx_mcdi_get_mac_address_pf(
+ __in efx_nic_t *enp,
+ __out_ecount_opt(6) uint8_t mac_addrp[6])
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_GET_MAC_ADDRESSES_IN_LEN,
+ MC_CMD_GET_MAC_ADDRESSES_OUT_LEN)];
+ efx_rc_t rc;
+
+ EFSYS_ASSERT(enp->en_family == EFX_FAMILY_HUNTINGTON ||
+ enp->en_family == EFX_FAMILY_MEDFORD);
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_GET_MAC_ADDRESSES;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_GET_MAC_ADDRESSES_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_GET_MAC_ADDRESSES_OUT_LEN;
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ if (req.emr_out_length_used < MC_CMD_GET_MAC_ADDRESSES_OUT_LEN) {
+ rc = EMSGSIZE;
+ goto fail2;
+ }
+
+ if (MCDI_OUT_DWORD(req, GET_MAC_ADDRESSES_OUT_MAC_COUNT) < 1) {
+ rc = ENOENT;
+ goto fail3;
+ }
+
+ if (mac_addrp != NULL) {
+ uint8_t *addrp;
+
+ addrp = MCDI_OUT2(req, uint8_t,
+ GET_MAC_ADDRESSES_OUT_MAC_ADDR_BASE);
+
+ EFX_MAC_ADDR_COPY(mac_addrp, addrp);
+ }
+
+ return (0);
+
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+efx_mcdi_get_mac_address_vf(
+ __in efx_nic_t *enp,
+ __out_ecount_opt(6) uint8_t mac_addrp[6])
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_VPORT_GET_MAC_ADDRESSES_IN_LEN,
+ MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_LENMAX)];
+ efx_rc_t rc;
+
+ EFSYS_ASSERT(enp->en_family == EFX_FAMILY_HUNTINGTON ||
+ enp->en_family == EFX_FAMILY_MEDFORD);
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_VPORT_GET_MAC_ADDRESSES;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_VPORT_GET_MAC_ADDRESSES_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_LENMAX;
+
+ MCDI_IN_SET_DWORD(req, VPORT_GET_MAC_ADDRESSES_IN_VPORT_ID,
+ EVB_PORT_ID_ASSIGNED);
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ if (req.emr_out_length_used <
+ MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_LENMIN) {
+ rc = EMSGSIZE;
+ goto fail2;
+ }
+
+ if (MCDI_OUT_DWORD(req,
+ VPORT_GET_MAC_ADDRESSES_OUT_MACADDR_COUNT) < 1) {
+ rc = ENOENT;
+ goto fail3;
+ }
+
+ if (mac_addrp != NULL) {
+ uint8_t *addrp;
+
+ addrp = MCDI_OUT2(req, uint8_t,
+ VPORT_GET_MAC_ADDRESSES_OUT_MACADDR);
+
+ EFX_MAC_ADDR_COPY(mac_addrp, addrp);
+ }
+
+ return (0);
+
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+efx_mcdi_get_clock(
+ __in efx_nic_t *enp,
+ __out uint32_t *sys_freqp,
+ __out uint32_t *dpcpu_freqp)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_GET_CLOCK_IN_LEN,
+ MC_CMD_GET_CLOCK_OUT_LEN)];
+ efx_rc_t rc;
+
+ EFSYS_ASSERT(enp->en_family == EFX_FAMILY_HUNTINGTON ||
+ enp->en_family == EFX_FAMILY_MEDFORD);
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_GET_CLOCK;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_GET_CLOCK_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_GET_CLOCK_OUT_LEN;
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ if (req.emr_out_length_used < MC_CMD_GET_CLOCK_OUT_LEN) {
+ rc = EMSGSIZE;
+ goto fail2;
+ }
+
+ *sys_freqp = MCDI_OUT_DWORD(req, GET_CLOCK_OUT_SYS_FREQ);
+ if (*sys_freqp == 0) {
+ rc = EINVAL;
+ goto fail3;
+ }
+ *dpcpu_freqp = MCDI_OUT_DWORD(req, GET_CLOCK_OUT_DPCPU_FREQ);
+ if (*dpcpu_freqp == 0) {
+ rc = EINVAL;
+ goto fail4;
+ }
+
+ return (0);
+
+fail4:
+ EFSYS_PROBE(fail4);
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+efx_mcdi_get_vector_cfg(
+ __in efx_nic_t *enp,
+ __out_opt uint32_t *vec_basep,
+ __out_opt uint32_t *pf_nvecp,
+ __out_opt uint32_t *vf_nvecp)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_GET_VECTOR_CFG_IN_LEN,
+ MC_CMD_GET_VECTOR_CFG_OUT_LEN)];
+ efx_rc_t rc;
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_GET_VECTOR_CFG;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_GET_VECTOR_CFG_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_GET_VECTOR_CFG_OUT_LEN;
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ if (req.emr_out_length_used < MC_CMD_GET_VECTOR_CFG_OUT_LEN) {
+ rc = EMSGSIZE;
+ goto fail2;
+ }
+
+ if (vec_basep != NULL)
+ *vec_basep = MCDI_OUT_DWORD(req, GET_VECTOR_CFG_OUT_VEC_BASE);
+ if (pf_nvecp != NULL)
+ *pf_nvecp = MCDI_OUT_DWORD(req, GET_VECTOR_CFG_OUT_VECS_PER_PF);
+ if (vf_nvecp != NULL)
+ *vf_nvecp = MCDI_OUT_DWORD(req, GET_VECTOR_CFG_OUT_VECS_PER_VF);
+
+ return (0);
+
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+static __checkReturn efx_rc_t
+efx_mcdi_alloc_vis(
+ __in efx_nic_t *enp,
+ __in uint32_t min_vi_count,
+ __in uint32_t max_vi_count,
+ __out uint32_t *vi_basep,
+ __out uint32_t *vi_countp,
+ __out uint32_t *vi_shiftp)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_ALLOC_VIS_IN_LEN,
+ MC_CMD_ALLOC_VIS_EXT_OUT_LEN)];
+ efx_rc_t rc;
+
+ if (vi_countp == NULL) {
+ rc = EINVAL;
+ goto fail1;
+ }
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_ALLOC_VIS;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_ALLOC_VIS_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_ALLOC_VIS_EXT_OUT_LEN;
+
+ MCDI_IN_SET_DWORD(req, ALLOC_VIS_IN_MIN_VI_COUNT, min_vi_count);
+ MCDI_IN_SET_DWORD(req, ALLOC_VIS_IN_MAX_VI_COUNT, max_vi_count);
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail2;
+ }
+
+ if (req.emr_out_length_used < MC_CMD_ALLOC_VIS_OUT_LEN) {
+ rc = EMSGSIZE;
+ goto fail3;
+ }
+
+ *vi_basep = MCDI_OUT_DWORD(req, ALLOC_VIS_OUT_VI_BASE);
+ *vi_countp = MCDI_OUT_DWORD(req, ALLOC_VIS_OUT_VI_COUNT);
+
+ /* Report VI_SHIFT if available (always zero for Huntington) */
+ if (req.emr_out_length_used < MC_CMD_ALLOC_VIS_EXT_OUT_LEN)
+ *vi_shiftp = 0;
+ else
+ *vi_shiftp = MCDI_OUT_DWORD(req, ALLOC_VIS_EXT_OUT_VI_SHIFT);
+
+ return (0);
+
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+
+static __checkReturn efx_rc_t
+efx_mcdi_free_vis(
+ __in efx_nic_t *enp)
+{
+ efx_mcdi_req_t req;
+ efx_rc_t rc;
+
+ EFX_STATIC_ASSERT(MC_CMD_FREE_VIS_IN_LEN == 0);
+ EFX_STATIC_ASSERT(MC_CMD_FREE_VIS_OUT_LEN == 0);
+
+ req.emr_cmd = MC_CMD_FREE_VIS;
+ req.emr_in_buf = NULL;
+ req.emr_in_length = 0;
+ req.emr_out_buf = NULL;
+ req.emr_out_length = 0;
+
+ efx_mcdi_execute_quiet(enp, &req);
+
+ /* Ignore ELREADY (no allocated VIs, so nothing to free) */
+ if ((req.emr_rc != 0) && (req.emr_rc != EALREADY)) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+
+static __checkReturn efx_rc_t
+efx_mcdi_alloc_piobuf(
+ __in efx_nic_t *enp,
+ __out efx_piobuf_handle_t *handlep)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_ALLOC_PIOBUF_IN_LEN,
+ MC_CMD_ALLOC_PIOBUF_OUT_LEN)];
+ efx_rc_t rc;
+
+ if (handlep == NULL) {
+ rc = EINVAL;
+ goto fail1;
+ }
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_ALLOC_PIOBUF;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_ALLOC_PIOBUF_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_ALLOC_PIOBUF_OUT_LEN;
+
+ efx_mcdi_execute_quiet(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail2;
+ }
+
+ if (req.emr_out_length_used < MC_CMD_ALLOC_PIOBUF_OUT_LEN) {
+ rc = EMSGSIZE;
+ goto fail3;
+ }
+
+ *handlep = MCDI_OUT_DWORD(req, ALLOC_PIOBUF_OUT_PIOBUF_HANDLE);
+
+ return (0);
+
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+static __checkReturn efx_rc_t
+efx_mcdi_free_piobuf(
+ __in efx_nic_t *enp,
+ __in efx_piobuf_handle_t handle)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_FREE_PIOBUF_IN_LEN,
+ MC_CMD_FREE_PIOBUF_OUT_LEN)];
+ efx_rc_t rc;
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_FREE_PIOBUF;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_FREE_PIOBUF_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_FREE_PIOBUF_OUT_LEN;
+
+ MCDI_IN_SET_DWORD(req, FREE_PIOBUF_IN_PIOBUF_HANDLE, handle);
+
+ efx_mcdi_execute_quiet(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+static __checkReturn efx_rc_t
+efx_mcdi_link_piobuf(
+ __in efx_nic_t *enp,
+ __in uint32_t vi_index,
+ __in efx_piobuf_handle_t handle)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_LINK_PIOBUF_IN_LEN,
+ MC_CMD_LINK_PIOBUF_OUT_LEN)];
+ efx_rc_t rc;
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_LINK_PIOBUF;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_LINK_PIOBUF_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_LINK_PIOBUF_OUT_LEN;
+
+ MCDI_IN_SET_DWORD(req, LINK_PIOBUF_IN_PIOBUF_HANDLE, handle);
+ MCDI_IN_SET_DWORD(req, LINK_PIOBUF_IN_TXQ_INSTANCE, vi_index);
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+static __checkReturn efx_rc_t
+efx_mcdi_unlink_piobuf(
+ __in efx_nic_t *enp,
+ __in uint32_t vi_index)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_UNLINK_PIOBUF_IN_LEN,
+ MC_CMD_UNLINK_PIOBUF_OUT_LEN)];
+ efx_rc_t rc;
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_UNLINK_PIOBUF;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_UNLINK_PIOBUF_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_UNLINK_PIOBUF_OUT_LEN;
+
+ MCDI_IN_SET_DWORD(req, UNLINK_PIOBUF_IN_TXQ_INSTANCE, vi_index);
+
+ efx_mcdi_execute_quiet(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+static void
+ef10_nic_alloc_piobufs(
+ __in efx_nic_t *enp,
+ __in uint32_t max_piobuf_count)
+{
+ efx_piobuf_handle_t *handlep;
+ unsigned int i;
+
+ EFSYS_ASSERT3U(max_piobuf_count, <=,
+ EFX_ARRAY_SIZE(enp->en_arch.ef10.ena_piobuf_handle));
+
+ enp->en_arch.ef10.ena_piobuf_count = 0;
+
+ for (i = 0; i < max_piobuf_count; i++) {
+ handlep = &enp->en_arch.ef10.ena_piobuf_handle[i];
+
+ if (efx_mcdi_alloc_piobuf(enp, handlep) != 0)
+ goto fail1;
+
+ enp->en_arch.ef10.ena_pio_alloc_map[i] = 0;
+ enp->en_arch.ef10.ena_piobuf_count++;
+ }
+
+ return;
+
+fail1:
+ for (i = 0; i < enp->en_arch.ef10.ena_piobuf_count; i++) {
+ handlep = &enp->en_arch.ef10.ena_piobuf_handle[i];
+
+ efx_mcdi_free_piobuf(enp, *handlep);
+ *handlep = EFX_PIOBUF_HANDLE_INVALID;
+ }
+ enp->en_arch.ef10.ena_piobuf_count = 0;
+}
+
+
+static void
+ef10_nic_free_piobufs(
+ __in efx_nic_t *enp)
+{
+ efx_piobuf_handle_t *handlep;
+ unsigned int i;
+
+ for (i = 0; i < enp->en_arch.ef10.ena_piobuf_count; i++) {
+ handlep = &enp->en_arch.ef10.ena_piobuf_handle[i];
+
+ efx_mcdi_free_piobuf(enp, *handlep);
+ *handlep = EFX_PIOBUF_HANDLE_INVALID;
+ }
+ enp->en_arch.ef10.ena_piobuf_count = 0;
+}
+
+/* Sub-allocate a block from a piobuf */
+ __checkReturn efx_rc_t
+ef10_nic_pio_alloc(
+ __inout efx_nic_t *enp,
+ __out uint32_t *bufnump,
+ __out efx_piobuf_handle_t *handlep,
+ __out uint32_t *blknump,
+ __out uint32_t *offsetp,
+ __out size_t *sizep)
+{
+ efx_nic_cfg_t *encp = &enp->en_nic_cfg;
+ efx_drv_cfg_t *edcp = &enp->en_drv_cfg;
+ uint32_t blk_per_buf;
+ uint32_t buf, blk;
+ efx_rc_t rc;
+
+ EFSYS_ASSERT(enp->en_family == EFX_FAMILY_HUNTINGTON ||
+ enp->en_family == EFX_FAMILY_MEDFORD);
+ EFSYS_ASSERT(bufnump);
+ EFSYS_ASSERT(handlep);
+ EFSYS_ASSERT(blknump);
+ EFSYS_ASSERT(offsetp);
+ EFSYS_ASSERT(sizep);
+
+ if ((edcp->edc_pio_alloc_size == 0) ||
+ (enp->en_arch.ef10.ena_piobuf_count == 0)) {
+ rc = ENOMEM;
+ goto fail1;
+ }
+ blk_per_buf = encp->enc_piobuf_size / edcp->edc_pio_alloc_size;
+
+ for (buf = 0; buf < enp->en_arch.ef10.ena_piobuf_count; buf++) {
+ uint32_t *map = &enp->en_arch.ef10.ena_pio_alloc_map[buf];
+
+ if (~(*map) == 0)
+ continue;
+
+ EFSYS_ASSERT3U(blk_per_buf, <=, (8 * sizeof (*map)));
+ for (blk = 0; blk < blk_per_buf; blk++) {
+ if ((*map & (1u << blk)) == 0) {
+ *map |= (1u << blk);
+ goto done;
+ }
+ }
+ }
+ rc = ENOMEM;
+ goto fail2;
+
+done:
+ *handlep = enp->en_arch.ef10.ena_piobuf_handle[buf];
+ *bufnump = buf;
+ *blknump = blk;
+ *sizep = edcp->edc_pio_alloc_size;
+ *offsetp = blk * (*sizep);
+
+ return (0);
+
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+/* Free a piobuf sub-allocated block */
+ __checkReturn efx_rc_t
+ef10_nic_pio_free(
+ __inout efx_nic_t *enp,
+ __in uint32_t bufnum,
+ __in uint32_t blknum)
+{
+ uint32_t *map;
+ efx_rc_t rc;
+
+ if ((bufnum >= enp->en_arch.ef10.ena_piobuf_count) ||
+ (blknum >= (8 * sizeof (*map)))) {
+ rc = EINVAL;
+ goto fail1;
+ }
+
+ map = &enp->en_arch.ef10.ena_pio_alloc_map[bufnum];
+ if ((*map & (1u << blknum)) == 0) {
+ rc = ENOENT;
+ goto fail2;
+ }
+ *map &= ~(1u << blknum);
+
+ return (0);
+
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+ef10_nic_pio_link(
+ __inout efx_nic_t *enp,
+ __in uint32_t vi_index,
+ __in efx_piobuf_handle_t handle)
+{
+ return (efx_mcdi_link_piobuf(enp, vi_index, handle));
+}
+
+ __checkReturn efx_rc_t
+ef10_nic_pio_unlink(
+ __inout efx_nic_t *enp,
+ __in uint32_t vi_index)
+{
+ return (efx_mcdi_unlink_piobuf(enp, vi_index));
+}
+
+static __checkReturn efx_rc_t
+ef10_mcdi_get_pf_count(
+ __in efx_nic_t *enp,
+ __out uint32_t *pf_countp)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_GET_PF_COUNT_IN_LEN,
+ MC_CMD_GET_PF_COUNT_OUT_LEN)];
+ efx_rc_t rc;
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_GET_PF_COUNT;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_GET_PF_COUNT_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_GET_PF_COUNT_OUT_LEN;
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail1;
+ }
+
+ if (req.emr_out_length_used < MC_CMD_GET_PF_COUNT_OUT_LEN) {
+ rc = EMSGSIZE;
+ goto fail2;
+ }
+
+ *pf_countp = *MCDI_OUT(req, uint8_t,
+ MC_CMD_GET_PF_COUNT_OUT_PF_COUNT_OFST);
+
+ EFSYS_ASSERT(*pf_countp != 0);
+
+ return (0);
+
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+ef10_get_datapath_caps(
+ __in efx_nic_t *enp)
+{
+ efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
+ uint32_t flags;
+ uint32_t flags2;
+ uint32_t tso2nc;
+ efx_rc_t rc;
+
+ if ((rc = efx_mcdi_get_capabilities(enp, &flags, NULL, NULL,
+ &flags2, &tso2nc)) != 0)
+ goto fail1;
+
+ if ((rc = ef10_mcdi_get_pf_count(enp, &encp->enc_hw_pf_count)) != 0)
+ goto fail1;
+
+#define CAP_FLAG(flags1, field) \
+ ((flags1) & (1 << (MC_CMD_GET_CAPABILITIES_V2_OUT_ ## field ## _LBN)))
+
+#define CAP_FLAG2(flags2, field) \
+ ((flags2) & (1 << (MC_CMD_GET_CAPABILITIES_V2_OUT_ ## field ## _LBN)))
+
+ /*
+ * Huntington RXDP firmware inserts a 0 or 14 byte prefix.
+ * We only support the 14 byte prefix here.
+ */
+ if (CAP_FLAG(flags, RX_PREFIX_LEN_14) == 0) {
+ rc = ENOTSUP;
+ goto fail2;
+ }
+ encp->enc_rx_prefix_size = 14;
+
+ /* Check if the firmware supports TSO */
+ encp->enc_fw_assisted_tso_enabled =
+ CAP_FLAG(flags, TX_TSO) ? B_TRUE : B_FALSE;
+
+ /* Check if the firmware supports FATSOv2 */
+ encp->enc_fw_assisted_tso_v2_enabled =
+ CAP_FLAG2(flags2, TX_TSO_V2) ? B_TRUE : B_FALSE;
+
+ /* Get the number of TSO contexts (FATSOv2) */
+ encp->enc_fw_assisted_tso_v2_n_contexts =
+ CAP_FLAG2(flags2, TX_TSO_V2) ? tso2nc : 0;
+
+ /* Check if the firmware has vadapter/vport/vswitch support */
+ encp->enc_datapath_cap_evb =
+ CAP_FLAG(flags, EVB) ? B_TRUE : B_FALSE;
+
+ /* Check if the firmware supports VLAN insertion */
+ encp->enc_hw_tx_insert_vlan_enabled =
+ CAP_FLAG(flags, TX_VLAN_INSERTION) ? B_TRUE : B_FALSE;
+
+ /* Check if the firmware supports RX event batching */
+ encp->enc_rx_batching_enabled =
+ CAP_FLAG(flags, RX_BATCHING) ? B_TRUE : B_FALSE;
+
+ /*
+ * Even if batching isn't reported as supported, we may still get
+ * batched events (see bug61153).
+ */
+ encp->enc_rx_batch_max = 16;
+
+ /* Check if the firmware supports disabling scatter on RXQs */
+ encp->enc_rx_disable_scatter_supported =
+ CAP_FLAG(flags, RX_DISABLE_SCATTER) ? B_TRUE : B_FALSE;
+
+ /* Check if the firmware supports packed stream mode */
+ encp->enc_rx_packed_stream_supported =
+ CAP_FLAG(flags, RX_PACKED_STREAM) ? B_TRUE : B_FALSE;
+
+ /*
+ * Check if the firmware supports configurable buffer sizes
+ * for packed stream mode (otherwise buffer size is 1Mbyte)
+ */
+ encp->enc_rx_var_packed_stream_supported =
+ CAP_FLAG(flags, RX_PACKED_STREAM_VAR_BUFFERS) ? B_TRUE : B_FALSE;
+
+ /* Check if the firmware supports set mac with running filters */
+ encp->enc_allow_set_mac_with_installed_filters =
+ CAP_FLAG(flags, VADAPTOR_PERMIT_SET_MAC_WHEN_FILTERS_INSTALLED) ?
+ B_TRUE : B_FALSE;
+
+ /*
+ * Check if firmware supports the extended MC_CMD_SET_MAC, which allows
+ * specifying which parameters to configure.
+ */
+ encp->enc_enhanced_set_mac_supported =
+ CAP_FLAG(flags, SET_MAC_ENHANCED) ? B_TRUE : B_FALSE;
+
+ /*
+ * Check if firmware supports version 2 of MC_CMD_INIT_EVQ, which allows
+ * us to let the firmware choose the settings to use on an EVQ.
+ */
+ encp->enc_init_evq_v2_supported =
+ CAP_FLAG2(flags2, INIT_EVQ_V2) ? B_TRUE : B_FALSE;
+
+ /*
+ * Check if firmware-verified NVRAM updates must be used.
+ *
+ * The firmware trusted installer requires all NVRAM updates to use
+ * version 2 of MC_CMD_NVRAM_UPDATE_START (to enable verified update)
+ * and version 2 of MC_CMD_NVRAM_UPDATE_FINISH (to verify the updated
+ * partition and report the result).
+ */
+ encp->enc_fw_verified_nvram_update_required =
+ CAP_FLAG2(flags2, NVRAM_UPDATE_REPORT_VERIFY_RESULT) ?
+ B_TRUE : B_FALSE;
+
+ /*
+ * Check if firmware provides packet memory and Rx datapath
+ * counters.
+ */
+ encp->enc_pm_and_rxdp_counters =
+ CAP_FLAG(flags, PM_AND_RXDP_COUNTERS) ? B_TRUE : B_FALSE;
+
+ /*
+ * Check if the 40G MAC hardware is capable of reporting
+ * statistics for Tx size bins.
+ */
+ encp->enc_mac_stats_40g_tx_size_bins =
+ CAP_FLAG2(flags2, MAC_STATS_40G_TX_SIZE_BINS) ? B_TRUE : B_FALSE;
+
+#undef CAP_FLAG
+#undef CAP_FLAG2
+
+ return (0);
+
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+
+#define EF10_LEGACY_PF_PRIVILEGE_MASK \
+ (MC_CMD_PRIVILEGE_MASK_IN_GRP_ADMIN | \
+ MC_CMD_PRIVILEGE_MASK_IN_GRP_LINK | \
+ MC_CMD_PRIVILEGE_MASK_IN_GRP_ONLOAD | \
+ MC_CMD_PRIVILEGE_MASK_IN_GRP_PTP | \
+ MC_CMD_PRIVILEGE_MASK_IN_GRP_INSECURE_FILTERS | \
+ MC_CMD_PRIVILEGE_MASK_IN_GRP_MAC_SPOOFING | \
+ MC_CMD_PRIVILEGE_MASK_IN_GRP_UNICAST | \
+ MC_CMD_PRIVILEGE_MASK_IN_GRP_MULTICAST | \
+ MC_CMD_PRIVILEGE_MASK_IN_GRP_BROADCAST | \
+ MC_CMD_PRIVILEGE_MASK_IN_GRP_ALL_MULTICAST | \
+ MC_CMD_PRIVILEGE_MASK_IN_GRP_PROMISCUOUS)
+
+#define EF10_LEGACY_VF_PRIVILEGE_MASK 0
+
+
+ __checkReturn efx_rc_t
+ef10_get_privilege_mask(
+ __in efx_nic_t *enp,
+ __out uint32_t *maskp)
+{
+ efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
+ uint32_t mask;
+ efx_rc_t rc;
+
+ if ((rc = efx_mcdi_privilege_mask(enp, encp->enc_pf, encp->enc_vf,
+ &mask)) != 0) {
+ if (rc != ENOTSUP)
+ goto fail1;
+
+ /* Fallback for old firmware without privilege mask support */
+ if (EFX_PCI_FUNCTION_IS_PF(encp)) {
+ /* Assume PF has admin privilege */
+ mask = EF10_LEGACY_PF_PRIVILEGE_MASK;
+ } else {
+ /* VF is always unprivileged by default */
+ mask = EF10_LEGACY_VF_PRIVILEGE_MASK;
+ }
+ }
+
+ *maskp = mask;
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+
+/*
+ * Table of mapping schemes from port number to the number of the external
+ * connector on the board. The external numbering does not distinguish
+ * off-board separated outputs such as from multi-headed cables.
+ *
+ * The count of adjacent port numbers that map to each external port
+ * and the offset in the numbering, is determined by the chip family and
+ * current port mode.
+ *
+ * For the Huntington family, the current port mode cannot be discovered,
+ * so the mapping used is instead the last match in the table to the full
+ * set of port modes to which the NIC can be configured. Therefore the
+ * ordering of entries in the the mapping table is significant.
+ */
+static struct {
+ efx_family_t family;
+ uint32_t modes_mask;
+ int32_t count;
+ int32_t offset;
+} __ef10_external_port_mappings[] = {
+ /* Supported modes with 1 output per external port */
+ {
+ EFX_FAMILY_HUNTINGTON,
+ (1 << TLV_PORT_MODE_10G) |
+ (1 << TLV_PORT_MODE_10G_10G) |
+ (1 << TLV_PORT_MODE_10G_10G_10G_10G),
+ 1,
+ 1
+ },
+ {
+ EFX_FAMILY_MEDFORD,
+ (1 << TLV_PORT_MODE_10G) |
+ (1 << TLV_PORT_MODE_10G_10G),
+ 1,
+ 1
+ },
+ /* Supported modes with 2 outputs per external port */
+ {
+ EFX_FAMILY_HUNTINGTON,
+ (1 << TLV_PORT_MODE_40G) |
+ (1 << TLV_PORT_MODE_40G_40G) |
+ (1 << TLV_PORT_MODE_40G_10G_10G) |
+ (1 << TLV_PORT_MODE_10G_10G_40G),
+ 2,
+ 1
+ },
+ {
+ EFX_FAMILY_MEDFORD,
+ (1 << TLV_PORT_MODE_40G) |
+ (1 << TLV_PORT_MODE_40G_40G) |
+ (1 << TLV_PORT_MODE_40G_10G_10G) |
+ (1 << TLV_PORT_MODE_10G_10G_40G) |
+ (1 << TLV_PORT_MODE_10G_10G_10G_10G_Q1_Q2),
+ 2,
+ 1
+ },
+ /* Supported modes with 4 outputs per external port */
+ {
+ EFX_FAMILY_MEDFORD,
+ (1 << TLV_PORT_MODE_10G_10G_10G_10G_Q) |
+ (1 << TLV_PORT_MODE_10G_10G_10G_10G_Q1),
+ 4,
+ 1,
+ },
+ {
+ EFX_FAMILY_MEDFORD,
+ (1 << TLV_PORT_MODE_10G_10G_10G_10G_Q2),
+ 4,
+ 2
+ },
+};
+
+ __checkReturn efx_rc_t
+ef10_external_port_mapping(
+ __in efx_nic_t *enp,
+ __in uint32_t port,
+ __out uint8_t *external_portp)
+{
+ efx_rc_t rc;
+ int i;
+ uint32_t port_modes;
+ uint32_t matches;
+ uint32_t current;
+ int32_t count = 1; /* Default 1-1 mapping */
+ int32_t offset = 1; /* Default starting external port number */
+
+ if ((rc = efx_mcdi_get_port_modes(enp, &port_modes, &current)) != 0) {
+ /*
+ * No current port mode information
+ * - infer mapping from available modes
+ */
+ if ((rc = efx_mcdi_get_port_modes(enp,
+ &port_modes, NULL)) != 0) {
+ /*
+ * No port mode information available
+ * - use default mapping
+ */
+ goto out;
+ }
+ } else {
+ /* Only need to scan the current mode */
+ port_modes = 1 << current;
+ }
+
+ /*
+ * Infer the internal port -> external port mapping from
+ * the possible port modes for this NIC.
+ */
+ for (i = 0; i < EFX_ARRAY_SIZE(__ef10_external_port_mappings); ++i) {
+ if (__ef10_external_port_mappings[i].family !=
+ enp->en_family)
+ continue;
+ matches = (__ef10_external_port_mappings[i].modes_mask &
+ port_modes);
+ if (matches != 0) {
+ count = __ef10_external_port_mappings[i].count;
+ offset = __ef10_external_port_mappings[i].offset;
+ port_modes &= ~matches;
+ }
+ }
+
+ if (port_modes != 0) {
+ /* Some advertised modes are not supported */
+ rc = ENOTSUP;
+ goto fail1;
+ }
+
+out:
+ /*
+ * Scale as required by last matched mode and then convert to
+ * correctly offset numbering
+ */
+ *external_portp = (uint8_t)((port / count) + offset);
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+
+ __checkReturn efx_rc_t
+ef10_nic_probe(
+ __in efx_nic_t *enp)
+{
+ const efx_nic_ops_t *enop = enp->en_enop;
+ efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
+ efx_drv_cfg_t *edcp = &(enp->en_drv_cfg);
+ efx_rc_t rc;
+
+ EFSYS_ASSERT(enp->en_family == EFX_FAMILY_HUNTINGTON ||
+ enp->en_family == EFX_FAMILY_MEDFORD);
+
+ /* Read and clear any assertion state */
+ if ((rc = efx_mcdi_read_assertion(enp)) != 0)
+ goto fail1;
+
+ /* Exit the assertion handler */
+ if ((rc = efx_mcdi_exit_assertion_handler(enp)) != 0)
+ if (rc != EACCES)
+ goto fail2;
+
+ if ((rc = efx_mcdi_drv_attach(enp, B_TRUE)) != 0)
+ goto fail3;
+
+ if ((rc = enop->eno_board_cfg(enp)) != 0)
+ if (rc != EACCES)
+ goto fail4;
+
+ /*
+ * Set default driver config limits (based on board config).
+ *
+ * FIXME: For now allocate a fixed number of VIs which is likely to be
+ * sufficient and small enough to allow multiple functions on the same
+ * port.
+ */
+ edcp->edc_min_vi_count = edcp->edc_max_vi_count =
+ MIN(128, MAX(encp->enc_rxq_limit, encp->enc_txq_limit));
+
+ /* The client driver must configure and enable PIO buffer support */
+ edcp->edc_max_piobuf_count = 0;
+ edcp->edc_pio_alloc_size = 0;
+
+#if EFSYS_OPT_MAC_STATS
+ /* Wipe the MAC statistics */
+ if ((rc = efx_mcdi_mac_stats_clear(enp)) != 0)
+ goto fail5;
+#endif
+
+#if EFSYS_OPT_LOOPBACK
+ if ((rc = efx_mcdi_get_loopback_modes(enp)) != 0)
+ goto fail6;
+#endif
+
+#if EFSYS_OPT_MON_STATS
+ if ((rc = mcdi_mon_cfg_build(enp)) != 0) {
+ /* Unprivileged functions do not have access to sensors */
+ if (rc != EACCES)
+ goto fail7;
+ }
+#endif
+
+ encp->enc_features = enp->en_features;
+
+ return (0);
+
+#if EFSYS_OPT_MON_STATS
+fail7:
+ EFSYS_PROBE(fail7);
+#endif
+#if EFSYS_OPT_LOOPBACK
+fail6:
+ EFSYS_PROBE(fail6);
+#endif
+#if EFSYS_OPT_MAC_STATS
+fail5:
+ EFSYS_PROBE(fail5);
+#endif
+fail4:
+ EFSYS_PROBE(fail4);
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+ef10_nic_set_drv_limits(
+ __inout efx_nic_t *enp,
+ __in efx_drv_limits_t *edlp)
+{
+ efx_nic_cfg_t *encp = &(enp->en_nic_cfg);
+ efx_drv_cfg_t *edcp = &(enp->en_drv_cfg);
+ uint32_t min_evq_count, max_evq_count;
+ uint32_t min_rxq_count, max_rxq_count;
+ uint32_t min_txq_count, max_txq_count;
+ efx_rc_t rc;
+
+ if (edlp == NULL) {
+ rc = EINVAL;
+ goto fail1;
+ }
+
+ /* Get minimum required and maximum usable VI limits */
+ min_evq_count = MIN(edlp->edl_min_evq_count, encp->enc_evq_limit);
+ min_rxq_count = MIN(edlp->edl_min_rxq_count, encp->enc_rxq_limit);
+ min_txq_count = MIN(edlp->edl_min_txq_count, encp->enc_txq_limit);
+
+ edcp->edc_min_vi_count =
+ MAX(min_evq_count, MAX(min_rxq_count, min_txq_count));
+
+ max_evq_count = MIN(edlp->edl_max_evq_count, encp->enc_evq_limit);
+ max_rxq_count = MIN(edlp->edl_max_rxq_count, encp->enc_rxq_limit);
+ max_txq_count = MIN(edlp->edl_max_txq_count, encp->enc_txq_limit);
+
+ edcp->edc_max_vi_count =
+ MAX(max_evq_count, MAX(max_rxq_count, max_txq_count));
+
+ /*
+ * Check limits for sub-allocated piobuf blocks.
+ * PIO is optional, so don't fail if the limits are incorrect.
+ */
+ if ((encp->enc_piobuf_size == 0) ||
+ (encp->enc_piobuf_limit == 0) ||
+ (edlp->edl_min_pio_alloc_size == 0) ||
+ (edlp->edl_min_pio_alloc_size > encp->enc_piobuf_size)) {
+ /* Disable PIO */
+ edcp->edc_max_piobuf_count = 0;
+ edcp->edc_pio_alloc_size = 0;
+ } else {
+ uint32_t blk_size, blk_count, blks_per_piobuf;
+
+ blk_size =
+ MAX(edlp->edl_min_pio_alloc_size,
+ encp->enc_piobuf_min_alloc_size);
+
+ blks_per_piobuf = encp->enc_piobuf_size / blk_size;
+ EFSYS_ASSERT3U(blks_per_piobuf, <=, 32);
+
+ blk_count = (encp->enc_piobuf_limit * blks_per_piobuf);
+
+ /* A zero max pio alloc count means unlimited */
+ if ((edlp->edl_max_pio_alloc_count > 0) &&
+ (edlp->edl_max_pio_alloc_count < blk_count)) {
+ blk_count = edlp->edl_max_pio_alloc_count;
+ }
+
+ edcp->edc_pio_alloc_size = blk_size;
+ edcp->edc_max_piobuf_count =
+ (blk_count + (blks_per_piobuf - 1)) / blks_per_piobuf;
+ }
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+
+ __checkReturn efx_rc_t
+ef10_nic_reset(
+ __in efx_nic_t *enp)
+{
+ efx_mcdi_req_t req;
+ uint8_t payload[MAX(MC_CMD_ENTITY_RESET_IN_LEN,
+ MC_CMD_ENTITY_RESET_OUT_LEN)];
+ efx_rc_t rc;
+
+ /* ef10_nic_reset() is called to recover from BADASSERT failures. */
+ if ((rc = efx_mcdi_read_assertion(enp)) != 0)
+ goto fail1;
+ if ((rc = efx_mcdi_exit_assertion_handler(enp)) != 0)
+ goto fail2;
+
+ (void) memset(payload, 0, sizeof (payload));
+ req.emr_cmd = MC_CMD_ENTITY_RESET;
+ req.emr_in_buf = payload;
+ req.emr_in_length = MC_CMD_ENTITY_RESET_IN_LEN;
+ req.emr_out_buf = payload;
+ req.emr_out_length = MC_CMD_ENTITY_RESET_OUT_LEN;
+
+ MCDI_IN_POPULATE_DWORD_1(req, ENTITY_RESET_IN_FLAG,
+ ENTITY_RESET_IN_FUNCTION_RESOURCE_RESET, 1);
+
+ efx_mcdi_execute(enp, &req);
+
+ if (req.emr_rc != 0) {
+ rc = req.emr_rc;
+ goto fail3;
+ }
+
+ /* Clear RX/TX DMA queue errors */
+ enp->en_reset_flags &= ~(EFX_RESET_RXQ_ERR | EFX_RESET_TXQ_ERR);
+
+ return (0);
+
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+ef10_nic_init(
+ __in efx_nic_t *enp)
+{
+ efx_drv_cfg_t *edcp = &(enp->en_drv_cfg);
+ uint32_t min_vi_count, max_vi_count;
+ uint32_t vi_count, vi_base, vi_shift;
+ uint32_t i;
+ uint32_t retry;
+ uint32_t delay_us;
+ efx_rc_t rc;
+
+ EFSYS_ASSERT(enp->en_family == EFX_FAMILY_HUNTINGTON ||
+ enp->en_family == EFX_FAMILY_MEDFORD);
+
+ /* Enable reporting of some events (e.g. link change) */
+ if ((rc = efx_mcdi_log_ctrl(enp)) != 0)
+ goto fail1;
+
+ /* Allocate (optional) on-chip PIO buffers */
+ ef10_nic_alloc_piobufs(enp, edcp->edc_max_piobuf_count);
+
+ /*
+ * For best performance, PIO writes should use a write-combined
+ * (WC) memory mapping. Using a separate WC mapping for the PIO
+ * aperture of each VI would be a burden to drivers (and not
+ * possible if the host page size is >4Kbyte).
+ *
+ * To avoid this we use a single uncached (UC) mapping for VI
+ * register access, and a single WC mapping for extra VIs used
+ * for PIO writes.
+ *
+ * Each piobuf must be linked to a VI in the WC mapping, and to
+ * each VI that is using a sub-allocated block from the piobuf.
+ */
+ min_vi_count = edcp->edc_min_vi_count;
+ max_vi_count =
+ edcp->edc_max_vi_count + enp->en_arch.ef10.ena_piobuf_count;
+
+ /* Ensure that the previously attached driver's VIs are freed */
+ if ((rc = efx_mcdi_free_vis(enp)) != 0)
+ goto fail2;
+
+ /*
+ * Reserve VI resources (EVQ+RXQ+TXQ) for this PCIe function. If this
+ * fails then retrying the request for fewer VI resources may succeed.
+ */
+ vi_count = 0;
+ if ((rc = efx_mcdi_alloc_vis(enp, min_vi_count, max_vi_count,
+ &vi_base, &vi_count, &vi_shift)) != 0)
+ goto fail3;
+
+ EFSYS_PROBE2(vi_alloc, uint32_t, vi_base, uint32_t, vi_count);
+
+ if (vi_count < min_vi_count) {
+ rc = ENOMEM;
+ goto fail4;
+ }
+
+ enp->en_arch.ef10.ena_vi_base = vi_base;
+ enp->en_arch.ef10.ena_vi_count = vi_count;
+ enp->en_arch.ef10.ena_vi_shift = vi_shift;
+
+ if (vi_count < min_vi_count + enp->en_arch.ef10.ena_piobuf_count) {
+ /* Not enough extra VIs to map piobufs */
+ ef10_nic_free_piobufs(enp);
+ }
+
+ enp->en_arch.ef10.ena_pio_write_vi_base =
+ vi_count - enp->en_arch.ef10.ena_piobuf_count;
+
+ /* Save UC memory mapping details */
+ enp->en_arch.ef10.ena_uc_mem_map_offset = 0;
+ if (enp->en_arch.ef10.ena_piobuf_count > 0) {
+ enp->en_arch.ef10.ena_uc_mem_map_size =
+ (ER_DZ_TX_PIOBUF_STEP *
+ enp->en_arch.ef10.ena_pio_write_vi_base);
+ } else {
+ enp->en_arch.ef10.ena_uc_mem_map_size =
+ (ER_DZ_TX_PIOBUF_STEP *
+ enp->en_arch.ef10.ena_vi_count);
+ }
+
+ /* Save WC memory mapping details */
+ enp->en_arch.ef10.ena_wc_mem_map_offset =
+ enp->en_arch.ef10.ena_uc_mem_map_offset +
+ enp->en_arch.ef10.ena_uc_mem_map_size;
+
+ enp->en_arch.ef10.ena_wc_mem_map_size =
+ (ER_DZ_TX_PIOBUF_STEP *
+ enp->en_arch.ef10.ena_piobuf_count);
+
+ /* Link piobufs to extra VIs in WC mapping */
+ if (enp->en_arch.ef10.ena_piobuf_count > 0) {
+ for (i = 0; i < enp->en_arch.ef10.ena_piobuf_count; i++) {
+ rc = efx_mcdi_link_piobuf(enp,
+ enp->en_arch.ef10.ena_pio_write_vi_base + i,
+ enp->en_arch.ef10.ena_piobuf_handle[i]);
+ if (rc != 0)
+ break;
+ }
+ }
+
+ /*
+ * Allocate a vAdaptor attached to our upstream vPort/pPort.
+ *
+ * On a VF, this may fail with MC_CMD_ERR_NO_EVB_PORT (ENOENT) if the PF
+ * driver has yet to bring up the EVB port. See bug 56147. In this case,
+ * retry the request several times after waiting a while. The wait time
+ * between retries starts small (10ms) and exponentially increases.
+ * Total wait time is a little over two seconds. Retry logic in the
+ * client driver may mean this whole loop is repeated if it continues to
+ * fail.
+ */
+ retry = 0;
+ delay_us = 10000;
+ while ((rc = efx_mcdi_vadaptor_alloc(enp, EVB_PORT_ID_ASSIGNED)) != 0) {
+ if (EFX_PCI_FUNCTION_IS_PF(&enp->en_nic_cfg) ||
+ (rc != ENOENT)) {
+ /*
+ * Do not retry alloc for PF, or for other errors on
+ * a VF.
+ */
+ goto fail5;
+ }
+
+ /* VF startup before PF is ready. Retry allocation. */
+ if (retry > 5) {
+ /* Too many attempts */
+ rc = EINVAL;
+ goto fail6;
+ }
+ EFSYS_PROBE1(mcdi_no_evb_port_retry, int, retry);
+ EFSYS_SLEEP(delay_us);
+ retry++;
+ if (delay_us < 500000)
+ delay_us <<= 2;
+ }
+
+ enp->en_vport_id = EVB_PORT_ID_ASSIGNED;
+ enp->en_nic_cfg.enc_mcdi_max_payload_length = MCDI_CTL_SDU_LEN_MAX_V2;
+
+ return (0);
+
+fail6:
+ EFSYS_PROBE(fail6);
+fail5:
+ EFSYS_PROBE(fail5);
+fail4:
+ EFSYS_PROBE(fail4);
+fail3:
+ EFSYS_PROBE(fail3);
+fail2:
+ EFSYS_PROBE(fail2);
+
+ ef10_nic_free_piobufs(enp);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ __checkReturn efx_rc_t
+ef10_nic_get_vi_pool(
+ __in efx_nic_t *enp,
+ __out uint32_t *vi_countp)
+{
+ EFSYS_ASSERT(enp->en_family == EFX_FAMILY_HUNTINGTON ||
+ enp->en_family == EFX_FAMILY_MEDFORD);
+
+ /*
+ * Report VIs that the client driver can use.
+ * Do not include VIs used for PIO buffer writes.
+ */
+ *vi_countp = enp->en_arch.ef10.ena_pio_write_vi_base;
+
+ return (0);
+}
+
+ __checkReturn efx_rc_t
+ef10_nic_get_bar_region(
+ __in efx_nic_t *enp,
+ __in efx_nic_region_t region,
+ __out uint32_t *offsetp,
+ __out size_t *sizep)
+{
+ efx_rc_t rc;
+
+ EFSYS_ASSERT(enp->en_family == EFX_FAMILY_HUNTINGTON ||
+ enp->en_family == EFX_FAMILY_MEDFORD);
+
+ /*
+ * TODO: Specify host memory mapping alignment and granularity
+ * in efx_drv_limits_t so that they can be taken into account
+ * when allocating extra VIs for PIO writes.
+ */
+ switch (region) {
+ case EFX_REGION_VI:
+ /* UC mapped memory BAR region for VI registers */
+ *offsetp = enp->en_arch.ef10.ena_uc_mem_map_offset;
+ *sizep = enp->en_arch.ef10.ena_uc_mem_map_size;
+ break;
+
+ case EFX_REGION_PIO_WRITE_VI:
+ /* WC mapped memory BAR region for piobuf writes */
+ *offsetp = enp->en_arch.ef10.ena_wc_mem_map_offset;
+ *sizep = enp->en_arch.ef10.ena_wc_mem_map_size;
+ break;
+
+ default:
+ rc = EINVAL;
+ goto fail1;
+ }
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+ void
+ef10_nic_fini(
+ __in efx_nic_t *enp)
+{
+ uint32_t i;
+ efx_rc_t rc;
+
+ (void) efx_mcdi_vadaptor_free(enp, enp->en_vport_id);
+ enp->en_vport_id = 0;
+
+ /* Unlink piobufs from extra VIs in WC mapping */
+ if (enp->en_arch.ef10.ena_piobuf_count > 0) {
+ for (i = 0; i < enp->en_arch.ef10.ena_piobuf_count; i++) {
+ rc = efx_mcdi_unlink_piobuf(enp,
+ enp->en_arch.ef10.ena_pio_write_vi_base + i);
+ if (rc != 0)
+ break;
+ }
+ }
+
+ ef10_nic_free_piobufs(enp);
+
+ (void) efx_mcdi_free_vis(enp);
+ enp->en_arch.ef10.ena_vi_count = 0;
+}
+
+ void
+ef10_nic_unprobe(
+ __in efx_nic_t *enp)
+{
+#if EFSYS_OPT_MON_STATS
+ mcdi_mon_cfg_free(enp);
+#endif /* EFSYS_OPT_MON_STATS */
+ (void) efx_mcdi_drv_attach(enp, B_FALSE);
+}
+
+#if EFSYS_OPT_DIAG
+
+ __checkReturn efx_rc_t
+ef10_nic_register_test(
+ __in efx_nic_t *enp)
+{
+ efx_rc_t rc;
+
+ /* FIXME */
+ _NOTE(ARGUNUSED(enp))
+ _NOTE(CONSTANTCONDITION)
+ if (B_FALSE) {
+ rc = ENOTSUP;
+ goto fail1;
+ }
+ /* FIXME */
+
+ return (0);
+
+fail1:
+ EFSYS_PROBE1(fail1, efx_rc_t, rc);
+
+ return (rc);
+}
+
+#endif /* EFSYS_OPT_DIAG */
+
+
+#endif /* EFSYS_OPT_HUNTINGTON || EFSYS_OPT_MEDFORD */