diff options
Diffstat (limited to 'drivers/net/sfc/base/ef10_tlv_layout.h')
-rw-r--r-- | drivers/net/sfc/base/ef10_tlv_layout.h | 941 |
1 files changed, 941 insertions, 0 deletions
diff --git a/drivers/net/sfc/base/ef10_tlv_layout.h b/drivers/net/sfc/base/ef10_tlv_layout.h new file mode 100644 index 00000000..7d099b81 --- /dev/null +++ b/drivers/net/sfc/base/ef10_tlv_layout.h @@ -0,0 +1,941 @@ +/**************************************************************************\ +*//*! \file +** <L5_PRIVATE L5_SOURCE> +** \author mjs +** \brief TLV item layouts for EF10 static and dynamic config in NVRAM +** \date 2012/11/20 +** \cop (c) Solarflare Communications Inc. +** </L5_PRIVATE> +*//* +\**************************************************************************/ + +/* These structures define the layouts for the TLV items stored in static and + * dynamic configuration partitions in NVRAM for EF10 (Huntington etc.). + * + * They contain the same sort of information that was kept in the + * siena_mc_static_config_hdr_t and siena_mc_dynamic_config_hdr_t structures + * (defined in <ci/mgmt/mc_flash_layout.h> and <ci/mgmt/mc_dynamic_cfg.h>) for + * Siena. + * + * These are used directly by the MC and should also be usable directly on host + * systems which are little-endian and do not do strange things with structure + * padding. (Big-endian host systems will require some byte-swapping.) + * + * ----- + * + * Please refer to SF-108797-SW for a general overview of the TLV partition + * format. + * + * ----- + * + * The current tag IDs have a general structure: with the exception of the + * special values defined in the document, they are of the form 0xLTTTNNNN, + * where: + * + * - L is a location, indicating where this tag is expected to be found: + * 0: static configuration + * 1: dynamic configuration + * 2: firmware internal use + * 3: license partition + * + * - TTT is a type, which is just a unique value. The same type value + * might appear in both locations, indicating a relationship between + * the items (e.g. static and dynamic VPD below). + * + * - NNNN is an index of some form. Some item types are per-port, some + * are per-PF, some are per-partition-type. + * + * ----- + * + * As with the previous Siena structures, each structure here is laid out + * carefully: values are aligned to their natural boundary, with explicit + * padding fields added where necessary. (No, technically this does not + * absolutely guarantee portability. But, in practice, compilers are generally + * sensible enough not to introduce completely pointless padding, and it works + * well enough.) + */ + + +#ifndef CI_MGMT_TLV_LAYOUT_H +#define CI_MGMT_TLV_LAYOUT_H + + +/* ---------------------------------------------------------------------------- + * General structure (defined by SF-108797-SW) + * ---------------------------------------------------------------------------- + */ + + +/* The "end" tag. + * + * (Note that this is *not* followed by length or value fields: anything after + * the tag itself is irrelevant.) + */ + +#define TLV_TAG_END (0xEEEEEEEE) + + +/* Other special reserved tag values. + */ + +#define TLV_TAG_SKIP (0x00000000) +#define TLV_TAG_INVALID (0xFFFFFFFF) + + +/* TLV partition header. + * + * In a TLV partition, this must be the first item in the sequence, at offset + * 0. + */ + +#define TLV_TAG_PARTITION_HEADER (0xEF10DA7A) + +struct tlv_partition_header { + uint32_t tag; + uint32_t length; + uint16_t type_id; +/* 0 indicates the default segment (always located at offset 0), while other values + * are for RFID-selectable presets that should immediately follow the default segment. + * The default segment may also have preset > 0, which means that it is a preset + * selected through an RFID command and copied by FW to the location at offset 0. */ + uint16_t preset; + uint32_t generation; + uint32_t total_length; +}; + + +/* TLV partition trailer. + * + * In a TLV partition, this must be the last item in the sequence, immediately + * preceding the TLV_TAG_END word. + */ + +#define TLV_TAG_PARTITION_TRAILER (0xEF101A57) + +struct tlv_partition_trailer { + uint32_t tag; + uint32_t length; + uint32_t generation; + uint32_t checksum; +}; + + +/* Appendable TLV partition header. + * + * In an appendable TLV partition, this must be the first item in the sequence, + * at offset 0. (Note that, unlike the configuration partitions, there is no + * trailer before the TLV_TAG_END word.) + */ + +#define TLV_TAG_APPENDABLE_PARTITION_HEADER (0xEF10ADA7) + +struct tlv_appendable_partition_header { + uint32_t tag; + uint32_t length; + uint16_t type_id; + uint16_t reserved; +}; + + +/* ---------------------------------------------------------------------------- + * Configuration items + * ---------------------------------------------------------------------------- + */ + + +/* NIC global capabilities. + */ + +#define TLV_TAG_GLOBAL_CAPABILITIES (0x00010000) + +struct tlv_global_capabilities { + uint32_t tag; + uint32_t length; + uint32_t flags; +}; + + +/* Siena-style per-port MAC address allocation. + * + * There are <count> addresses, starting at <base_address> and incrementing + * by adding <stride> to the low-order byte(s). + * + * (See also TLV_TAG_GLOBAL_MAC for an alternative, specifying a global pool + * of contiguous MAC addresses for the firmware to allocate as it sees fit.) + */ + +#define TLV_TAG_PORT_MAC(port) (0x00020000 + (port)) + +struct tlv_port_mac { + uint32_t tag; + uint32_t length; + uint8_t base_address[6]; + uint16_t reserved; + uint16_t count; + uint16_t stride; +}; + + +/* Static VPD. + * + * This is the portion of VPD which is set at manufacturing time and not + * expected to change. It is formatted as a standard PCI VPD block. There are + * global and per-pf TLVs for this, the global TLV is new for Medford and is + * used in preference to the per-pf TLV. + */ + +#define TLV_TAG_PF_STATIC_VPD(pf) (0x00030000 + (pf)) + +struct tlv_pf_static_vpd { + uint32_t tag; + uint32_t length; + uint8_t bytes[]; +}; + +#define TLV_TAG_GLOBAL_STATIC_VPD (0x001f0000) + +struct tlv_global_static_vpd { + uint32_t tag; + uint32_t length; + uint8_t bytes[]; +}; + + +/* Dynamic VPD. + * + * This is the portion of VPD which may be changed (e.g. by firmware updates). + * It is formatted as a standard PCI VPD block. There are global and per-pf TLVs + * for this, the global TLV is new for Medford and is used in preference to the + * per-pf TLV. + */ + +#define TLV_TAG_PF_DYNAMIC_VPD(pf) (0x10030000 + (pf)) + +struct tlv_pf_dynamic_vpd { + uint32_t tag; + uint32_t length; + uint8_t bytes[]; +}; + +#define TLV_TAG_GLOBAL_DYNAMIC_VPD (0x10200000) + +struct tlv_global_dynamic_vpd { + uint32_t tag; + uint32_t length; + uint8_t bytes[]; +}; + + +/* "DBI" PCI config space changes. + * + * This is a set of edits made to the default PCI config space values before + * the device is allowed to enumerate. There are global and per-pf TLVs for + * this, the global TLV is new for Medford and is used in preference to the + * per-pf TLV. + */ + +#define TLV_TAG_PF_DBI(pf) (0x00040000 + (pf)) + +struct tlv_pf_dbi { + uint32_t tag; + uint32_t length; + struct { + uint16_t addr; + uint16_t byte_enables; + uint32_t value; + } items[]; +}; + + +#define TLV_TAG_GLOBAL_DBI (0x00210000) + +struct tlv_global_dbi { + uint32_t tag; + uint32_t length; + struct { + uint16_t addr; + uint16_t byte_enables; + uint32_t value; + } items[]; +}; + + +/* Partition subtype codes. + * + * A subtype may optionally be stored for each type of partition present in + * the NVRAM. For example, this may be used to allow a generic firmware update + * utility to select a specific variant of firmware for a specific variant of + * board. + * + * The description[] field is an optional string which is returned in the + * MC_CMD_NVRAM_METADATA response if present. + */ + +#define TLV_TAG_PARTITION_SUBTYPE(type) (0x00050000 + (type)) + +struct tlv_partition_subtype { + uint32_t tag; + uint32_t length; + uint32_t subtype; + uint8_t description[]; +}; + + +/* Partition version codes. + * + * A version may optionally be stored for each type of partition present in + * the NVRAM. This provides a standard way of tracking the currently stored + * version of each of the various component images. + */ + +#define TLV_TAG_PARTITION_VERSION(type) (0x10060000 + (type)) + +struct tlv_partition_version { + uint32_t tag; + uint32_t length; + uint16_t version_w; + uint16_t version_x; + uint16_t version_y; + uint16_t version_z; +}; + +/* Global PCIe configuration */ + +#define TLV_TAG_GLOBAL_PCIE_CONFIG (0x10070000) + +struct tlv_pcie_config { + uint32_t tag; + uint32_t length; + int16_t max_pf_number; /**< Largest PF RID (lower PFs may be hidden) */ + uint16_t pf_aper; /**< BIU aperture for PF BAR2 */ + uint16_t vf_aper; /**< BIU aperture for VF BAR0 */ + uint16_t int_aper; /**< BIU aperture for PF BAR4 and VF BAR2 */ +#define TLV_MAX_PF_DEFAULT (-1) /* Use FW default for largest PF RID */ +#define TLV_APER_DEFAULT (0xFFFF) /* Use FW default for a given aperture */ +}; + +/* Per-PF configuration. Note that not all these fields are necessarily useful + * as the apertures are constrained by the BIU settings (the one case we do + * use is to make BAR2 bigger than the BIU thinks to reserve space), but we can + * tidy things up later */ + +#define TLV_TAG_PF_PCIE_CONFIG(pf) (0x10080000 + (pf)) + +struct tlv_per_pf_pcie_config { + uint32_t tag; + uint32_t length; + uint8_t vfs_total; + uint8_t port_allocation; + uint16_t vectors_per_pf; + uint16_t vectors_per_vf; + uint8_t pf_bar0_aperture; + uint8_t pf_bar2_aperture; + uint8_t vf_bar0_aperture; + uint8_t vf_base; + uint16_t supp_pagesz; + uint16_t msix_vec_base; +}; + + +/* Development ONLY. This is a single TLV tag for all the gubbins + * that can be set through the MC command-line other than the PCIe + * settings. This is a temporary measure. */ +#define TLV_TAG_TMP_GUBBINS (0x10090000) /* legacy symbol - do not use */ +#define TLV_TAG_TMP_GUBBINS_HUNT TLV_TAG_TMP_GUBBINS + +struct tlv_tmp_gubbins { + uint32_t tag; + uint32_t length; + /* Consumed by dpcpu.c */ + uint64_t tx0_tags; /* Bitmap */ + uint64_t tx1_tags; /* Bitmap */ + uint64_t dl_tags; /* Bitmap */ + uint32_t flags; +#define TLV_DPCPU_TX_STRIPE (1) /* No longer used, has no effect */ +#define TLV_DPCPU_BIU_TAGS (2) /* Use BIU tag manager */ +#define TLV_DPCPU_TX0_TAGS (4) /* tx0_tags is valid */ +#define TLV_DPCPU_TX1_TAGS (8) /* tx1_tags is valid */ +#define TLV_DPCPU_DL_TAGS (16) /* dl_tags is valid */ + /* Consumed by features.c */ + uint32_t dut_features; /* All 1s -> leave alone */ + int8_t with_rmon; /* 0 -> off, 1 -> on, -1 -> leave alone */ + /* Consumed by clocks_hunt.c */ + int8_t clk_mode; /* 0 -> off, 1 -> on, -1 -> leave alone */ + /* No longer used, superseded by TLV_TAG_DESCRIPTOR_CACHE_CONFIG. */ + int8_t rx_dc_size; /* -1 -> leave alone */ + int8_t tx_dc_size; + int16_t num_q_allocs; +}; + +/* Global port configuration + * + * This is now deprecated in favour of a platform-provided default + * and dynamic config override via tlv_global_port_options. + */ +#define TLV_TAG_GLOBAL_PORT_CONFIG (0x000a0000) + +struct tlv_global_port_config { + uint32_t tag; + uint32_t length; + uint32_t ports_per_core; + uint32_t max_port_speed; +}; + + +/* Firmware options. + * + * This is intended for user-configurable selection of optional firmware + * features and variants. + * + * Initially, this consists only of the satellite CPU firmware variant + * selection, but this tag could be extended in the future (using the + * tag length to determine whether additional fields are present). + */ + +#define TLV_TAG_FIRMWARE_OPTIONS (0x100b0000) + +struct tlv_firmware_options { + uint32_t tag; + uint32_t length; + uint32_t firmware_variant; +#define TLV_FIRMWARE_VARIANT_DRIVER_SELECTED (0xffffffff) + +/* These are the values for overriding the driver's choice; the definitions + * are taken from MCDI so that they don't get out of step. Include + * <ci/mgmt/mc_driver_pcol.h> or the equivalent from your driver's tree if + * you need to use these constants. + */ +#define TLV_FIRMWARE_VARIANT_FULL_FEATURED MC_CMD_FW_FULL_FEATURED +#define TLV_FIRMWARE_VARIANT_LOW_LATENCY MC_CMD_FW_LOW_LATENCY +#define TLV_FIRMWARE_VARIANT_PACKED_STREAM MC_CMD_FW_PACKED_STREAM +#define TLV_FIRMWARE_VARIANT_HIGH_TX_RATE MC_CMD_FW_HIGH_TX_RATE +#define TLV_FIRMWARE_VARIANT_PACKED_STREAM_HASH_MODE_1 \ + MC_CMD_FW_PACKED_STREAM_HASH_MODE_1 +#define TLV_FIRMWARE_VARIANT_RULES_ENGINE MC_CMD_FW_RULES_ENGINE +}; + +/* Voltage settings + * + * Intended for boards with A0 silicon where the core voltage may + * need tweaking. Most likely set once when the pass voltage is + * determined. */ + +#define TLV_TAG_0V9_SETTINGS (0x000c0000) + +struct tlv_0v9_settings { + uint32_t tag; + uint32_t length; + uint16_t flags; /* Boards with high 0v9 settings may need active cooling */ +#define TLV_TAG_0V9_REQUIRES_FAN (1) + uint16_t target_voltage; /* In millivolts */ + /* Since the limits are meant to be centred to the target (and must at least + * contain it) they need setting as well. */ + uint16_t warn_low; /* In millivolts */ + uint16_t warn_high; /* In millivolts */ + uint16_t panic_low; /* In millivolts */ + uint16_t panic_high; /* In millivolts */ +}; + + +/* Clock configuration */ + +#define TLV_TAG_CLOCK_CONFIG (0x000d0000) /* legacy symbol - do not use */ +#define TLV_TAG_CLOCK_CONFIG_HUNT TLV_TAG_CLOCK_CONFIG + +struct tlv_clock_config { + uint32_t tag; + uint32_t length; + uint16_t clk_sys; /* MHz */ + uint16_t clk_dpcpu; /* MHz */ + uint16_t clk_icore; /* MHz */ + uint16_t clk_pcs; /* MHz */ +}; + +#define TLV_TAG_CLOCK_CONFIG_MEDFORD (0x00100000) + +struct tlv_clock_config_medford { + uint32_t tag; + uint32_t length; + uint16_t clk_sys; /* MHz */ + uint16_t clk_mc; /* MHz */ + uint16_t clk_rmon; /* MHz */ + uint16_t clk_vswitch; /* MHz */ + uint16_t clk_dpcpu; /* MHz */ + uint16_t clk_pcs; /* MHz */ +}; + + +/* EF10-style global pool of MAC addresses. + * + * There are <count> addresses, starting at <base_address>, which are + * contiguous. Firmware is responsible for allocating addresses from this + * pool to ports / PFs as appropriate. + */ + +#define TLV_TAG_GLOBAL_MAC (0x000e0000) + +struct tlv_global_mac { + uint32_t tag; + uint32_t length; + uint8_t base_address[6]; + uint16_t reserved1; + uint16_t count; + uint16_t reserved2; +}; + +#define TLV_TAG_ATB_0V9_TARGET (0x000f0000) /* legacy symbol - do not use */ +#define TLV_TAG_ATB_0V9_TARGET_HUNT TLV_TAG_ATB_0V9_TARGET + +/* The target value for the 0v9 power rail measured on-chip at the + * analogue test bus */ +struct tlv_0v9_atb_target { + uint32_t tag; + uint32_t length; + uint16_t millivolts; + uint16_t reserved; +}; + +/* Factory settings for amplitude calibration of the PCIE TX serdes */ +#define TLV_TAG_TX_PCIE_AMP_CONFIG (0x00220000) +struct tlv_pcie_tx_amp_config { + uint32_t tag; + uint32_t length; + uint8_t quad_tx_imp2k[4]; + uint8_t quad_tx_imp50[4]; + uint8_t lane_amp[16]; +}; + + +/* Global PCIe configuration, second revision. This represents the visible PFs + * by a bitmap rather than having the number of the highest visible one. As such + * it can (for a 16-PF chip) represent a superset of what TLV_TAG_GLOBAL_PCIE_CONFIG + * can and it should be used in place of that tag in future (but compatibility with + * the old tag will be left in the firmware indefinitely). */ + +#define TLV_TAG_GLOBAL_PCIE_CONFIG_R2 (0x10100000) + +struct tlv_pcie_config_r2 { + uint32_t tag; + uint32_t length; + uint16_t visible_pfs; /**< Bitmap of visible PFs */ + uint16_t pf_aper; /**< BIU aperture for PF BAR2 */ + uint16_t vf_aper; /**< BIU aperture for VF BAR0 */ + uint16_t int_aper; /**< BIU aperture for PF BAR4 and VF BAR2 */ +}; + +/* Dynamic port mode. + * + * Allows selecting alternate port configuration for platforms that support it + * (e.g. 1x40G vs 2x10G on Milano, 1x40G vs 4x10G on Medford). This affects the + * number of externally visible ports (and, hence, PF to port mapping), so must + * be done at boot time. + * + * This tag supercedes tlv_global_port_config. + */ + +#define TLV_TAG_GLOBAL_PORT_MODE (0x10110000) + +struct tlv_global_port_mode { + uint32_t tag; + uint32_t length; + uint32_t port_mode; +#define TLV_PORT_MODE_DEFAULT (0xffffffff) /* Default for given platform */ +#define TLV_PORT_MODE_10G (0) /* 10G, single SFP/10G-KR */ +#define TLV_PORT_MODE_40G (1) /* 40G, single QSFP/40G-KR */ +#define TLV_PORT_MODE_10G_10G (2) /* 2x10G, dual SFP/10G-KR or single QSFP */ +#define TLV_PORT_MODE_40G_40G (3) /* 40G + 40G, dual QSFP/40G-KR (Greenport, Medford) */ +#define TLV_PORT_MODE_10G_10G_10G_10G (4) /* 2x10G + 2x10G, quad SFP/10G-KR or dual QSFP (Greenport) */ +#define TLV_PORT_MODE_10G_10G_10G_10G_Q1 (4) /* 4x10G, single QSFP, cage 0 (Medford) */ +#define TLV_PORT_MODE_10G_10G_10G_10G_Q (5) /* 4x10G, single QSFP, cage 0 (Medford) OBSOLETE DO NOT USE */ +#define TLV_PORT_MODE_40G_10G_10G (6) /* 1x40G + 2x10G, dual QSFP (Greenport, Medford) */ +#define TLV_PORT_MODE_10G_10G_40G (7) /* 2x10G + 1x40G, dual QSFP (Greenport, Medford) */ +#define TLV_PORT_MODE_10G_10G_10G_10G_Q2 (8) /* 4x10G, single QSFP, cage 1 (Medford) */ +#define TLV_PORT_MODE_10G_10G_10G_10G_Q1_Q2 (9) /* 2x10G + 2x10G, dual QSFP (Medford) */ +#define TLV_PORT_MODE_MAX TLV_PORT_MODE_10G_10G_10G_10G_Q1_Q2 +}; + +/* Type of the v-switch created implicitly by the firmware */ + +#define TLV_TAG_VSWITCH_TYPE(port) (0x10120000 + (port)) + +struct tlv_vswitch_type { + uint32_t tag; + uint32_t length; + uint32_t vswitch_type; +#define TLV_VSWITCH_TYPE_DEFAULT (0xffffffff) /* Firmware default; equivalent to no TLV present for a given port */ +#define TLV_VSWITCH_TYPE_NONE (0) +#define TLV_VSWITCH_TYPE_VLAN (1) +#define TLV_VSWITCH_TYPE_VEB (2) +#define TLV_VSWITCH_TYPE_VEPA (3) +#define TLV_VSWITCH_TYPE_MUX (4) +#define TLV_VSWITCH_TYPE_TEST (5) +}; + +/* A VLAN tag for the v-port created implicitly by the firmware */ + +#define TLV_TAG_VPORT_VLAN_TAG(pf) (0x10130000 + (pf)) + +struct tlv_vport_vlan_tag { + uint32_t tag; + uint32_t length; + uint32_t vlan_tag; +#define TLV_VPORT_NO_VLAN_TAG (0xFFFFFFFF) /* Default in the absence of TLV for a given PF */ +}; + +/* Offset to be applied to the 0v9 setting, wherever it came from */ + +#define TLV_TAG_ATB_0V9_OFFSET (0x10140000) + +struct tlv_0v9_atb_offset { + uint32_t tag; + uint32_t length; + int16_t offset_millivolts; + uint16_t reserved; +}; + +/* A privilege mask given on reset to all non-admin PCIe functions (that is other than first-PF-per-port). + * The meaning of particular bits is defined in mcdi_ef10.yml under MC_CMD_PRIVILEGE_MASK, see also bug 44583. + * TLV_TAG_PRIVILEGE_MASK_ADD specifies bits that should be added (ORed) to firmware default while + * TLV_TAG_PRIVILEGE_MASK_REM specifies bits that should be removed (ANDed) from firmware default: + * Initial_privilege_mask = (firmware_default_mask | privilege_mask_add) & ~privilege_mask_rem */ + +#define TLV_TAG_PRIVILEGE_MASK (0x10150000) /* legacy symbol - do not use */ + +struct tlv_privilege_mask { /* legacy structure - do not use */ + uint32_t tag; + uint32_t length; + uint32_t privilege_mask; +}; + +#define TLV_TAG_PRIVILEGE_MASK_ADD (0x10150000) + +struct tlv_privilege_mask_add { + uint32_t tag; + uint32_t length; + uint32_t privilege_mask_add; +}; + +#define TLV_TAG_PRIVILEGE_MASK_REM (0x10160000) + +struct tlv_privilege_mask_rem { + uint32_t tag; + uint32_t length; + uint32_t privilege_mask_rem; +}; + +/* Additional privileges given to all PFs. + * This tag takes precedence over TLV_TAG_PRIVILEGE_MASK_REM. */ + +#define TLV_TAG_PRIVILEGE_MASK_ADD_ALL_PFS (0x10190000) + +struct tlv_privilege_mask_add_all_pfs { + uint32_t tag; + uint32_t length; + uint32_t privilege_mask_add; +}; + +/* Additional privileges given to a selected PF. + * This tag takes precedence over TLV_TAG_PRIVILEGE_MASK_REM. */ + +#define TLV_TAG_PRIVILEGE_MASK_ADD_SINGLE_PF(pf) (0x101A0000 + (pf)) + +struct tlv_privilege_mask_add_single_pf { + uint32_t tag; + uint32_t length; + uint32_t privilege_mask_add; +}; + +/* Turning on/off the PFIOV mode. + * This tag only takes effect if TLV_TAG_VSWITCH_TYPE is missing or set to DEFAULT. */ + +#define TLV_TAG_PFIOV(port) (0x10170000 + (port)) + +struct tlv_pfiov { + uint32_t tag; + uint32_t length; + uint32_t pfiov; +#define TLV_PFIOV_OFF (0) /* Default */ +#define TLV_PFIOV_ON (1) +}; + +/* Multicast filter chaining mode selection. + * + * When enabled, multicast packets are delivered to all recipients of all + * matching multicast filters, with the exception that IP multicast filters + * will steal traffic from MAC multicast filters on a per-function basis. + * (New behaviour.) + * + * When disabled, multicast packets will always be delivered only to the + * recipients of the highest priority matching multicast filter. + * (Legacy behaviour.) + * + * The DEFAULT mode (which is the same as the tag not being present at all) + * is equivalent to ENABLED in production builds, and DISABLED in eftest + * builds. + * + * This option is intended to provide run-time control over this feature + * while it is being stabilised and may be withdrawn at some point in the + * future; the new behaviour is intended to become the standard behaviour. + */ + +#define TLV_TAG_MCAST_FILTER_CHAINING (0x10180000) + +struct tlv_mcast_filter_chaining { + uint32_t tag; + uint32_t length; + uint32_t mode; +#define TLV_MCAST_FILTER_CHAINING_DEFAULT (0xffffffff) +#define TLV_MCAST_FILTER_CHAINING_DISABLED (0) +#define TLV_MCAST_FILTER_CHAINING_ENABLED (1) +}; + +/* Pacer rate limit per PF */ +#define TLV_TAG_RATE_LIMIT(pf) (0x101b0000 + (pf)) + +struct tlv_rate_limit { + uint32_t tag; + uint32_t length; + uint32_t rate_mbps; +}; + +/* OCSD Enable/Disable + * + * This setting allows OCSD to be disabled. This is a requirement for HP + * servers to support PCI passthrough for virtualization. + * + * The DEFAULT mode (which is the same as the tag not being present) is + * equivalent to ENABLED. + * + * This option is not used by the MCFW, and is entirely handled by the various + * drivers that support OCSD, by reading the setting before they attempt + * to enable OCSD. + * + * bit0: OCSD Disabled/Enabled + */ + +#define TLV_TAG_OCSD (0x101C0000) + +struct tlv_ocsd { + uint32_t tag; + uint32_t length; + uint32_t mode; +#define TLV_OCSD_DISABLED 0 +#define TLV_OCSD_ENABLED 1 /* Default */ +}; + +/* Descriptor cache config. + * + * Sets the sizes of the TX and RX descriptor caches as a power of 2. It also + * sets the total number of VIs. When the number of VIs is reduced VIs are taken + * away from the highest numbered port first, so a vi_count of 1024 means 1024 + * VIs on the first port and 0 on the second (on a Torino). + */ + +#define TLV_TAG_DESCRIPTOR_CACHE_CONFIG (0x101d0000) + +struct tlv_descriptor_cache_config { + uint32_t tag; + uint32_t length; + uint8_t rx_desc_cache_size; + uint8_t tx_desc_cache_size; + uint16_t vi_count; +}; +#define TLV_DESC_CACHE_DEFAULT (0xff) +#define TLV_VI_COUNT_DEFAULT (0xffff) + +/* RX event merging config (read batching). + * + * Sets the global maximum number of events for the merging bins, and the + * global timeout configuration for the bins. + */ + +#define TLV_TAG_RX_EVENT_MERGING_CONFIG (0x101e0000) + +struct tlv_rx_event_merging_config { + uint32_t tag; + uint32_t length; + uint32_t max_events; +#define TLV_RX_EVENT_MERGING_CONFIG_MAX_EVENTS_MAX ((1 << 4) - 1) + uint32_t timeout_ns; +}; +#define TLV_RX_EVENT_MERGING_MAX_EVENTS_DEFAULT (0xffffffff) +#define TLV_RX_EVENT_MERGING_TIMEOUT_NS_DEFAULT (0xffffffff) + +#define TLV_TAG_PCIE_LINK_SETTINGS (0x101f0000) +struct tlv_pcie_link_settings { + uint32_t tag; + uint32_t length; + uint16_t gen; /* Target PCIe generation: 1, 2, 3 */ + uint16_t width; /* Number of lanes */ +}; + +/* TX event merging config. + * + * Sets the global maximum number of events for the merging bins, and the + * global timeout configuration for the bins, and the global timeout for + * empty queues. + */ +#define TLV_TAG_TX_EVENT_MERGING_CONFIG (0x10210000) +struct tlv_tx_event_merging_config { + uint32_t tag; + uint32_t length; + uint32_t max_events; +#define TLV_TX_EVENT_MERGING_CONFIG_MAX_EVENTS_MAX ((1 << 4) - 1) + uint32_t timeout_ns; + uint32_t qempty_timeout_ns; /* Medford only */ +}; +#define TLV_TX_EVENT_MERGING_MAX_EVENTS_DEFAULT (0xffffffff) +#define TLV_TX_EVENT_MERGING_TIMEOUT_NS_DEFAULT (0xffffffff) +#define TLV_TX_EVENT_MERGING_QEMPTY_TIMEOUT_NS_DEFAULT (0xffffffff) + +#define TLV_TAG_LICENSE (0x30800000) + +typedef struct tlv_license { + uint32_t tag; + uint32_t length; + uint8_t data[]; +} tlv_license_t; + +/* TSA NIC IP address configuration + * + * Sets the TSA NIC IP address statically via configuration tool or dynamically + * via DHCP via snooping based on the mode selection (0=Static, 1=DHCP, 2=Snoop) + * + * NOTE: This TAG is temporarily placed in the dynamic config partition and will + * be moved to a private partition during TSA development. It is not used in any + * released code yet. + */ + +#define TLV_TAG_TMP_TSAN_CONFIG (0x10220000) + +#define TLV_TSAN_IP_MODE_STATIC (0) +#define TLV_TSAN_IP_MODE_DHCP (1) +#define TLV_TSAN_IP_MODE_SNOOP (2) +typedef struct tlv_tsan_config { + uint32_t tag; + uint32_t length; + uint32_t mode; + uint32_t ip; + uint32_t netmask; + uint32_t gateway; + uint32_t port; + uint32_t bind_retry; /* DEPRECATED */ + uint32_t bind_bkout; /* DEPRECATED */ +} tlv_tsan_config_t; + +/* TSA Controller IP address configuration + * + * Sets the TSA Controller IP address statically via configuration tool + * + * NOTE: This TAG is temporarily placed in the dynamic config partition and will + * be moved to a private partition during TSA development. It is not used in any + * released code yet. + */ + +#define TLV_TAG_TMP_TSAC_CONFIG (0x10230000) + +#define TLV_MAX_TSACS (4) +typedef struct tlv_tsac_config { + uint32_t tag; + uint32_t length; + uint32_t num_tsacs; + uint32_t ip[TLV_MAX_TSACS]; + uint32_t port[TLV_MAX_TSACS]; +} tlv_tsac_config_t; + +/* Binding ticket + * + * Sets the TSA NIC binding ticket used for binding process between the TSA NIC + * and the TSA Controller + * + * NOTE: This TAG is temporarily placed in the dynamic config partition and will + * be moved to a private partition during TSA development. It is not used in any + * released code yet. + */ + +#define TLV_TAG_TMP_BINDING_TICKET (0x10240000) + +typedef struct tlv_binding_ticket { + uint32_t tag; + uint32_t length; + uint8_t bytes[]; +} tlv_binding_ticket_t; + +/* Solarflare private key (DEPRECATED) + * + * Sets the Solareflare private key used for signing during the binding process + * + * NOTE: This TAG is temporarily placed in the dynamic config partition and will + * be moved to a private partition during TSA development. It is not used in any + * released code yet. + */ + +#define TLV_TAG_TMP_PIK_SF (0x10250000) /* DEPRECATED */ + +typedef struct tlv_pik_sf { + uint32_t tag; + uint32_t length; + uint8_t bytes[]; +} tlv_pik_sf_t; + +/* CA root certificate + * + * Sets the CA root certificate used for TSA Controller verfication during + * TLS connection setup between the TSA NIC and the TSA Controller + * + * NOTE: This TAG is temporarily placed in the dynamic config partition and will + * be moved to a private partition during TSA development. It is not used in any + * released code yet. + */ + +#define TLV_TAG_TMP_CA_ROOT_CERT (0x10260000) + +typedef struct tlv_ca_root_cert { + uint32_t tag; + uint32_t length; + uint8_t bytes[]; +} tlv_ca_root_cert_t; + +/* Tx vFIFO Low latency configuration + * + * To keep the desired booting behaviour for the switch, it just requires to + * know if the low latency mode is enabled. + */ + +#define TLV_TAG_TX_VFIFO_ULL_MODE (0x10270000) +struct tlv_tx_vfifo_ull_mode { + uint32_t tag; + uint32_t length; + uint8_t mode; +#define TLV_TX_VFIFO_ULL_MODE_DEFAULT 0 +}; + +/* BIU mode + * + * Medford2 tag for selecting VI window decode (see values below) + */ +#define TLV_TAG_BIU_VI_WINDOW_MODE (0x10280000) +struct tlv_biu_vi_window_mode { + uint32_t tag; + uint32_t length; + uint8_t mode; +#define TLV_BIU_VI_WINDOW_MODE_8K 0 /* 8k per VI, CTPIO not mapped, medford/hunt compatible */ +#define TLV_BIU_VI_WINDOW_MODE_16K 1 /* 16k per VI, CTPIO mapped */ +#define TLV_BIU_VI_WINDOW_MODE_64K 2 /* 64k per VI, CTPIO mapped, POWER-friendly */ +}; + +/* FastPD mode + * + * Medford2 tag for configuring the FastPD mode (see values below) + */ +#define TLV_TAG_FASTPD_MODE(port) (0x10290000 + (port)) +struct tlv_fastpd_mode { + uint32_t tag; + uint32_t length; + uint8_t mode; +#define TLV_FASTPD_MODE_SOFT_ALL 0 /* All packets to the SoftPD */ +#define TLV_FASTPD_MODE_FAST_ALL 1 /* All packets to the FastPD */ +#define TLV_FASTPD_MODE_FAST_SUPPORTED 2 /* Supported packet types to the FastPD; everything else to the SoftPD */ +}; + +#endif /* CI_MGMT_TLV_LAYOUT_H */ |