diff options
Diffstat (limited to 'drivers/net/szedata2')
| -rw-r--r-- | drivers/net/szedata2/Makefile | 33 | ||||
| -rw-r--r-- | drivers/net/szedata2/rte_eth_szedata2.c | 930 | ||||
| -rw-r--r-- | drivers/net/szedata2/rte_eth_szedata2.h | 37 | ||||
| -rw-r--r-- | drivers/net/szedata2/szedata2_iobuf.c | 203 | ||||
| -rw-r--r-- | drivers/net/szedata2/szedata2_iobuf.h | 356 | ||||
| -rw-r--r-- | drivers/net/szedata2/szedata2_logs.h | 22 |
6 files changed, 632 insertions, 949 deletions
diff --git a/drivers/net/szedata2/Makefile b/drivers/net/szedata2/Makefile index 0ebd3ec5..b77fae16 100644 --- a/drivers/net/szedata2/Makefile +++ b/drivers/net/szedata2/Makefile @@ -1,33 +1,5 @@ -# BSD LICENSE -# -# Copyright (c) 2015 CESNET -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# * Neither the name of CESNET nor the names of its -# contributors may be used to endorse or promote products derived -# from this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2015 CESNET include $(RTE_SDK)/mk/rte.vars.mk @@ -51,7 +23,6 @@ LIBABIVER := 1 # all source are stored in SRCS-y # SRCS-$(CONFIG_RTE_LIBRTE_PMD_SZEDATA2) += rte_eth_szedata2.c -SRCS-$(CONFIG_RTE_LIBRTE_PMD_SZEDATA2) += szedata2_iobuf.c # # Export include files diff --git a/drivers/net/szedata2/rte_eth_szedata2.c b/drivers/net/szedata2/rte_eth_szedata2.c index e53c738d..910c64d0 100644 --- a/drivers/net/szedata2/rte_eth_szedata2.c +++ b/drivers/net/szedata2/rte_eth_szedata2.c @@ -1,34 +1,5 @@ -/*- - * BSD LICENSE - * - * Copyright (c) 2015 - 2016 CESNET - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of CESNET nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2015 - 2016 CESNET */ #include <stdint.h> @@ -50,10 +21,9 @@ #include <rte_memcpy.h> #include <rte_kvargs.h> #include <rte_dev.h> -#include <rte_atomic.h> #include "rte_eth_szedata2.h" -#include "szedata2_iobuf.h" +#include "szedata2_logs.h" #define RTE_ETH_SZEDATA2_MAX_RX_QUEUES 32 #define RTE_ETH_SZEDATA2_MAX_TX_QUEUES 32 @@ -68,9 +38,53 @@ #define SZEDATA2_DEV_PATH_FMT "/dev/szedataII%u" +/** + * Format string for suffix used to differentiate between Ethernet ports + * on the same PCI device. + */ +#define SZEDATA2_ETH_DEV_NAME_SUFFIX_FMT "-port%u" + +/** + * Maximum number of ports for one device. + */ +#define SZEDATA2_MAX_PORTS 2 + +/** + * Entry in list of PCI devices for this driver. + */ +struct pci_dev_list_entry; +struct pci_dev_list_entry { + LIST_ENTRY(pci_dev_list_entry) next; + struct rte_pci_device *pci_dev; + unsigned int port_count; +}; + +/* List of PCI devices with number of ports for this driver. */ +LIST_HEAD(pci_dev_list, pci_dev_list_entry) szedata2_pci_dev_list = + LIST_HEAD_INITIALIZER(szedata2_pci_dev_list); + +struct port_info { + unsigned int rx_base_id; + unsigned int tx_base_id; + unsigned int rx_count; + unsigned int tx_count; + int numa_node; +}; + +struct pmd_internals { + struct rte_eth_dev *dev; + uint16_t max_rx_queues; + uint16_t max_tx_queues; + unsigned int rxq_base_id; + unsigned int txq_base_id; + char *sze_dev_path; +}; + struct szedata2_rx_queue { + struct pmd_internals *priv; struct szedata *sze; uint8_t rx_channel; + uint16_t qid; uint16_t in_port; struct rte_mempool *mb_pool; volatile uint64_t rx_pkts; @@ -79,21 +93,17 @@ struct szedata2_rx_queue { }; struct szedata2_tx_queue { + struct pmd_internals *priv; struct szedata *sze; uint8_t tx_channel; + uint16_t qid; volatile uint64_t tx_pkts; volatile uint64_t tx_bytes; volatile uint64_t err_pkts; }; -struct pmd_internals { - struct szedata2_rx_queue rx_queue[RTE_ETH_SZEDATA2_MAX_RX_QUEUES]; - struct szedata2_tx_queue tx_queue[RTE_ETH_SZEDATA2_MAX_TX_QUEUES]; - uint16_t max_rx_queues; - uint16_t max_tx_queues; - char sze_dev[PATH_MAX]; - struct rte_mem_resource *pci_rsc; -}; +int szedata2_logtype_init; +int szedata2_logtype_driver; static struct ether_addr eth_addr = { .addr_bytes = { 0x00, 0x11, 0x17, 0x00, 0x00, 0x00 } @@ -133,8 +143,10 @@ eth_szedata2_rx(void *queue, for (i = 0; i < nb_pkts; i++) { mbuf = rte_pktmbuf_alloc(sze_q->mb_pool); - if (unlikely(mbuf == NULL)) + if (unlikely(mbuf == NULL)) { + sze_q->priv->dev->data->rx_mbuf_alloc_failed++; break; + } /* get the next sze packet */ if (sze->ct_rx_lck != NULL && !sze->ct_rx_rem_bytes && @@ -318,10 +330,10 @@ eth_szedata2_rx(void *queue, * sze packet will not fit in one mbuf, * scattered mode is not enabled, drop packet */ - RTE_LOG(ERR, PMD, + PMD_DRV_LOG(ERR, "SZE segment %d bytes will not fit in one mbuf " "(%d bytes), scattered mode is not enabled, " - "drop packet!!\n", + "drop packet!!", packet_size, buf_size); rte_pktmbuf_free(mbuf); } @@ -354,6 +366,8 @@ eth_szedata2_rx_scattered(void *queue, uint16_t packet_len1 = 0; uint16_t packet_len2 = 0; uint16_t hw_data_align; + uint64_t *mbuf_failed_ptr = + &sze_q->priv->dev->data->rx_mbuf_alloc_failed; if (unlikely(sze_q->sze == NULL || nb_pkts == 0)) return 0; @@ -541,6 +555,7 @@ eth_szedata2_rx_scattered(void *queue, sze->ct_rx_lck = ct_rx_lck_backup; sze->ct_rx_rem_bytes = ct_rx_rem_bytes_backup; sze->ct_rx_cur_ptr = ct_rx_cur_ptr_backup; + sze_q->priv->dev->data->rx_mbuf_alloc_failed++; break; } @@ -590,6 +605,7 @@ eth_szedata2_rx_scattered(void *queue, ct_rx_rem_bytes_backup; sze->ct_rx_cur_ptr = ct_rx_cur_ptr_backup; + (*mbuf_failed_ptr)++; goto finish; } @@ -633,6 +649,7 @@ eth_szedata2_rx_scattered(void *queue, ct_rx_rem_bytes_backup; sze->ct_rx_cur_ptr = ct_rx_cur_ptr_backup; + (*mbuf_failed_ptr)++; goto finish; } @@ -889,7 +906,7 @@ eth_rx_queue_start(struct rte_eth_dev *dev, uint16_t rxq_id) if (rxq->sze == NULL) { uint32_t rx = 1 << rxq->rx_channel; uint32_t tx = 0; - rxq->sze = szedata_open(internals->sze_dev); + rxq->sze = szedata_open(internals->sze_dev_path); if (rxq->sze == NULL) return -EINVAL; ret = szedata_subscribe3(rxq->sze, &rx, &tx); @@ -934,7 +951,7 @@ eth_tx_queue_start(struct rte_eth_dev *dev, uint16_t txq_id) if (txq->sze == NULL) { uint32_t rx = 0; uint32_t tx = 1 << txq->tx_channel; - txq->sze = szedata_open(internals->sze_dev); + txq->sze = szedata_open(internals->sze_dev_path); if (txq->sze == NULL) return -EINVAL; ret = szedata_subscribe3(txq->sze, &rx, &tx); @@ -1017,7 +1034,7 @@ static int eth_dev_configure(struct rte_eth_dev *dev) { struct rte_eth_dev_data *data = dev->data; - if (data->dev_conf.rxmode.enable_scatter == 1) { + if (data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_SCATTER) { dev->rx_pkt_burst = eth_szedata2_rx_scattered; data->scattered_rx = 1; } else { @@ -1032,13 +1049,17 @@ eth_dev_info(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info) { struct pmd_internals *internals = dev->data->dev_private; - dev_info->pci_dev = RTE_ETH_DEV_TO_PCI(dev); + dev_info->if_index = 0; dev_info->max_mac_addrs = 1; dev_info->max_rx_pktlen = (uint32_t)-1; dev_info->max_rx_queues = internals->max_rx_queues; dev_info->max_tx_queues = internals->max_tx_queues; dev_info->min_rx_bufsize = 0; + dev_info->rx_offload_capa = DEV_RX_OFFLOAD_SCATTER; + dev_info->tx_offload_capa = 0; + dev_info->rx_queue_offload_capa = 0; + dev_info->tx_queue_offload_capa = 0; dev_info->speed_capa = ETH_LINK_SPEED_100G; } @@ -1054,22 +1075,29 @@ eth_stats_get(struct rte_eth_dev *dev, uint64_t tx_err_total = 0; uint64_t rx_total_bytes = 0; uint64_t tx_total_bytes = 0; - const struct pmd_internals *internals = dev->data->dev_private; - for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS && i < nb_rx; i++) { - stats->q_ipackets[i] = internals->rx_queue[i].rx_pkts; - stats->q_ibytes[i] = internals->rx_queue[i].rx_bytes; - rx_total += stats->q_ipackets[i]; - rx_total_bytes += stats->q_ibytes[i]; + for (i = 0; i < nb_rx; i++) { + struct szedata2_rx_queue *rxq = dev->data->rx_queues[i]; + + if (i < RTE_ETHDEV_QUEUE_STAT_CNTRS) { + stats->q_ipackets[i] = rxq->rx_pkts; + stats->q_ibytes[i] = rxq->rx_bytes; + } + rx_total += rxq->rx_pkts; + rx_total_bytes += rxq->rx_bytes; } - for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS && i < nb_tx; i++) { - stats->q_opackets[i] = internals->tx_queue[i].tx_pkts; - stats->q_obytes[i] = internals->tx_queue[i].tx_bytes; - stats->q_errors[i] = internals->tx_queue[i].err_pkts; - tx_total += stats->q_opackets[i]; - tx_total_bytes += stats->q_obytes[i]; - tx_err_total += stats->q_errors[i]; + for (i = 0; i < nb_tx; i++) { + struct szedata2_tx_queue *txq = dev->data->tx_queues[i]; + + if (i < RTE_ETHDEV_QUEUE_STAT_CNTRS) { + stats->q_opackets[i] = txq->tx_pkts; + stats->q_obytes[i] = txq->tx_bytes; + stats->q_errors[i] = txq->err_pkts; + } + tx_total += txq->tx_pkts; + tx_total_bytes += txq->tx_bytes; + tx_err_total += txq->err_pkts; } stats->ipackets = rx_total; @@ -1077,6 +1105,7 @@ eth_stats_get(struct rte_eth_dev *dev, stats->ibytes = rx_total_bytes; stats->obytes = tx_total_bytes; stats->oerrors = tx_err_total; + stats->rx_nombuf = dev->data->rx_mbuf_alloc_failed; return 0; } @@ -1087,17 +1116,18 @@ eth_stats_reset(struct rte_eth_dev *dev) uint16_t i; uint16_t nb_rx = dev->data->nb_rx_queues; uint16_t nb_tx = dev->data->nb_tx_queues; - struct pmd_internals *internals = dev->data->dev_private; for (i = 0; i < nb_rx; i++) { - internals->rx_queue[i].rx_pkts = 0; - internals->rx_queue[i].rx_bytes = 0; - internals->rx_queue[i].err_pkts = 0; + struct szedata2_rx_queue *rxq = dev->data->rx_queues[i]; + rxq->rx_pkts = 0; + rxq->rx_bytes = 0; + rxq->err_pkts = 0; } for (i = 0; i < nb_tx; i++) { - internals->tx_queue[i].tx_pkts = 0; - internals->tx_queue[i].tx_bytes = 0; - internals->tx_queue[i].err_pkts = 0; + struct szedata2_tx_queue *txq = dev->data->tx_queues[i]; + txq->tx_pkts = 0; + txq->tx_bytes = 0; + txq->err_pkts = 0; } } @@ -1105,9 +1135,11 @@ static void eth_rx_queue_release(void *q) { struct szedata2_rx_queue *rxq = (struct szedata2_rx_queue *)q; - if (rxq->sze != NULL) { - szedata_close(rxq->sze); - rxq->sze = NULL; + + if (rxq != NULL) { + if (rxq->sze != NULL) + szedata_close(rxq->sze); + rte_free(rxq); } } @@ -1115,9 +1147,11 @@ static void eth_tx_queue_release(void *q) { struct szedata2_tx_queue *txq = (struct szedata2_tx_queue *)q; - if (txq->sze != NULL) { - szedata_close(txq->sze); - txq->sze = NULL; + + if (txq != NULL) { + if (txq->sze != NULL) + szedata_close(txq->sze); + rte_free(txq); } } @@ -1142,111 +1176,34 @@ eth_dev_close(struct rte_eth_dev *dev) dev->data->nb_tx_queues = 0; } -/** - * Function takes value from first IBUF status register. - * Values in IBUF and OBUF should be same. - * - * @param internals - * Pointer to device private structure. - * @return - * Link speed constant. - */ -static inline enum szedata2_link_speed -get_link_speed(const struct pmd_internals *internals) -{ - const volatile struct szedata2_ibuf *ibuf = - ibuf_ptr_by_index(internals->pci_rsc, 0); - uint32_t speed = (szedata2_read32(&ibuf->ibuf_st) & 0x70) >> 4; - switch (speed) { - case 0x03: - return SZEDATA2_LINK_SPEED_10G; - case 0x04: - return SZEDATA2_LINK_SPEED_40G; - case 0x05: - return SZEDATA2_LINK_SPEED_100G; - default: - return SZEDATA2_LINK_SPEED_DEFAULT; - } -} - static int eth_link_update(struct rte_eth_dev *dev, int wait_to_complete __rte_unused) { struct rte_eth_link link; - struct rte_eth_link *link_ptr = &link; - struct rte_eth_link *dev_link = &dev->data->dev_link; - struct pmd_internals *internals = (struct pmd_internals *) - dev->data->dev_private; - const volatile struct szedata2_ibuf *ibuf; - uint32_t i; - bool link_is_up = false; - - switch (get_link_speed(internals)) { - case SZEDATA2_LINK_SPEED_10G: - link.link_speed = ETH_SPEED_NUM_10G; - break; - case SZEDATA2_LINK_SPEED_40G: - link.link_speed = ETH_SPEED_NUM_40G; - break; - case SZEDATA2_LINK_SPEED_100G: - link.link_speed = ETH_SPEED_NUM_100G; - break; - default: - link.link_speed = ETH_SPEED_NUM_10G; - break; - } - /* szedata2 uses only full duplex */ - link.link_duplex = ETH_LINK_FULL_DUPLEX; - - for (i = 0; i < szedata2_ibuf_count; i++) { - ibuf = ibuf_ptr_by_index(internals->pci_rsc, i); - /* - * Link is considered up if at least one ibuf is enabled - * and up. - */ - if (ibuf_is_enabled(ibuf) && ibuf_is_link_up(ibuf)) { - link_is_up = true; - break; - } - } - - link.link_status = (link_is_up) ? ETH_LINK_UP : ETH_LINK_DOWN; + memset(&link, 0, sizeof(link)); + link.link_speed = ETH_SPEED_NUM_100G; + link.link_duplex = ETH_LINK_FULL_DUPLEX; + link.link_status = ETH_LINK_UP; link.link_autoneg = ETH_LINK_FIXED; - rte_atomic64_cmpset((uint64_t *)dev_link, *(uint64_t *)dev_link, - *(uint64_t *)link_ptr); - + rte_eth_linkstatus_set(dev, &link); return 0; } static int -eth_dev_set_link_up(struct rte_eth_dev *dev) +eth_dev_set_link_up(struct rte_eth_dev *dev __rte_unused) { - struct pmd_internals *internals = (struct pmd_internals *) - dev->data->dev_private; - uint32_t i; - - for (i = 0; i < szedata2_ibuf_count; i++) - ibuf_enable(ibuf_ptr_by_index(internals->pci_rsc, i)); - for (i = 0; i < szedata2_obuf_count; i++) - obuf_enable(obuf_ptr_by_index(internals->pci_rsc, i)); + PMD_DRV_LOG(WARNING, "Setting link up is not supported."); return 0; } static int -eth_dev_set_link_down(struct rte_eth_dev *dev) +eth_dev_set_link_down(struct rte_eth_dev *dev __rte_unused) { - struct pmd_internals *internals = (struct pmd_internals *) - dev->data->dev_private; - uint32_t i; - - for (i = 0; i < szedata2_ibuf_count; i++) - ibuf_disable(ibuf_ptr_by_index(internals->pci_rsc, i)); - for (i = 0; i < szedata2_obuf_count; i++) - obuf_disable(obuf_ptr_by_index(internals->pci_rsc, i)); + PMD_DRV_LOG(WARNING, "Setting link down is not supported."); return 0; } @@ -1254,26 +1211,50 @@ static int eth_rx_queue_setup(struct rte_eth_dev *dev, uint16_t rx_queue_id, uint16_t nb_rx_desc __rte_unused, - unsigned int socket_id __rte_unused, + unsigned int socket_id, const struct rte_eth_rxconf *rx_conf __rte_unused, struct rte_mempool *mb_pool) { - struct pmd_internals *internals = dev->data->dev_private; - struct szedata2_rx_queue *rxq = &internals->rx_queue[rx_queue_id]; + struct szedata2_rx_queue *rxq; int ret; - uint32_t rx = 1 << rx_queue_id; + struct pmd_internals *internals = dev->data->dev_private; + uint8_t rx_channel = internals->rxq_base_id + rx_queue_id; + uint32_t rx = 1 << rx_channel; uint32_t tx = 0; - rxq->sze = szedata_open(internals->sze_dev); - if (rxq->sze == NULL) + PMD_INIT_FUNC_TRACE(); + + if (dev->data->rx_queues[rx_queue_id] != NULL) { + eth_rx_queue_release(dev->data->rx_queues[rx_queue_id]); + dev->data->rx_queues[rx_queue_id] = NULL; + } + + rxq = rte_zmalloc_socket("szedata2 rx queue", + sizeof(struct szedata2_rx_queue), + RTE_CACHE_LINE_SIZE, socket_id); + if (rxq == NULL) { + PMD_INIT_LOG(ERR, "rte_zmalloc_socket() failed for rx queue id " + "%" PRIu16 "!", rx_queue_id); + return -ENOMEM; + } + + rxq->priv = internals; + rxq->sze = szedata_open(internals->sze_dev_path); + if (rxq->sze == NULL) { + PMD_INIT_LOG(ERR, "szedata_open() failed for rx queue id " + "%" PRIu16 "!", rx_queue_id); + eth_rx_queue_release(rxq); return -EINVAL; + } ret = szedata_subscribe3(rxq->sze, &rx, &tx); if (ret != 0 || rx == 0) { - szedata_close(rxq->sze); - rxq->sze = NULL; + PMD_INIT_LOG(ERR, "szedata_subscribe3() failed for rx queue id " + "%" PRIu16 "!", rx_queue_id); + eth_rx_queue_release(rxq); return -EINVAL; } - rxq->rx_channel = rx_queue_id; + rxq->rx_channel = rx_channel; + rxq->qid = rx_queue_id; rxq->in_port = dev->data->port_id; rxq->mb_pool = mb_pool; rxq->rx_pkts = 0; @@ -1281,6 +1262,11 @@ eth_rx_queue_setup(struct rte_eth_dev *dev, rxq->err_pkts = 0; dev->data->rx_queues[rx_queue_id] = rxq; + + PMD_INIT_LOG(DEBUG, "Configured rx queue id %" PRIu16 " on socket " + "%u (channel id %u).", rxq->qid, socket_id, + rxq->rx_channel); + return 0; } @@ -1288,89 +1274,93 @@ static int eth_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id, uint16_t nb_tx_desc __rte_unused, - unsigned int socket_id __rte_unused, + unsigned int socket_id, const struct rte_eth_txconf *tx_conf __rte_unused) { - struct pmd_internals *internals = dev->data->dev_private; - struct szedata2_tx_queue *txq = &internals->tx_queue[tx_queue_id]; + struct szedata2_tx_queue *txq; int ret; + struct pmd_internals *internals = dev->data->dev_private; + uint8_t tx_channel = internals->txq_base_id + tx_queue_id; uint32_t rx = 0; - uint32_t tx = 1 << tx_queue_id; + uint32_t tx = 1 << tx_channel; + + PMD_INIT_FUNC_TRACE(); - txq->sze = szedata_open(internals->sze_dev); - if (txq->sze == NULL) + if (dev->data->tx_queues[tx_queue_id] != NULL) { + eth_tx_queue_release(dev->data->tx_queues[tx_queue_id]); + dev->data->tx_queues[tx_queue_id] = NULL; + } + + txq = rte_zmalloc_socket("szedata2 tx queue", + sizeof(struct szedata2_tx_queue), + RTE_CACHE_LINE_SIZE, socket_id); + if (txq == NULL) { + PMD_INIT_LOG(ERR, "rte_zmalloc_socket() failed for tx queue id " + "%" PRIu16 "!", tx_queue_id); + return -ENOMEM; + } + + txq->priv = internals; + txq->sze = szedata_open(internals->sze_dev_path); + if (txq->sze == NULL) { + PMD_INIT_LOG(ERR, "szedata_open() failed for tx queue id " + "%" PRIu16 "!", tx_queue_id); + eth_tx_queue_release(txq); return -EINVAL; + } ret = szedata_subscribe3(txq->sze, &rx, &tx); if (ret != 0 || tx == 0) { - szedata_close(txq->sze); - txq->sze = NULL; + PMD_INIT_LOG(ERR, "szedata_subscribe3() failed for tx queue id " + "%" PRIu16 "!", tx_queue_id); + eth_tx_queue_release(txq); return -EINVAL; } - txq->tx_channel = tx_queue_id; + txq->tx_channel = tx_channel; + txq->qid = tx_queue_id; txq->tx_pkts = 0; txq->tx_bytes = 0; txq->err_pkts = 0; dev->data->tx_queues[tx_queue_id] = txq; + + PMD_INIT_LOG(DEBUG, "Configured tx queue id %" PRIu16 " on socket " + "%u (channel id %u).", txq->qid, socket_id, + txq->tx_channel); + return 0; } -static void +static int eth_mac_addr_set(struct rte_eth_dev *dev __rte_unused, struct ether_addr *mac_addr __rte_unused) { + return 0; } static void -eth_promiscuous_enable(struct rte_eth_dev *dev) +eth_promiscuous_enable(struct rte_eth_dev *dev __rte_unused) { - struct pmd_internals *internals = (struct pmd_internals *) - dev->data->dev_private; - uint32_t i; - - for (i = 0; i < szedata2_ibuf_count; i++) { - ibuf_mac_mode_write(ibuf_ptr_by_index(internals->pci_rsc, i), - SZEDATA2_MAC_CHMODE_PROMISC); - } + PMD_DRV_LOG(WARNING, "Enabling promiscuous mode is not supported. " + "The card is always in promiscuous mode."); } static void -eth_promiscuous_disable(struct rte_eth_dev *dev) +eth_promiscuous_disable(struct rte_eth_dev *dev __rte_unused) { - struct pmd_internals *internals = (struct pmd_internals *) - dev->data->dev_private; - uint32_t i; - - for (i = 0; i < szedata2_ibuf_count; i++) { - ibuf_mac_mode_write(ibuf_ptr_by_index(internals->pci_rsc, i), - SZEDATA2_MAC_CHMODE_ONLY_VALID); - } + PMD_DRV_LOG(WARNING, "Disabling promiscuous mode is not supported. " + "The card is always in promiscuous mode."); } static void -eth_allmulticast_enable(struct rte_eth_dev *dev) +eth_allmulticast_enable(struct rte_eth_dev *dev __rte_unused) { - struct pmd_internals *internals = (struct pmd_internals *) - dev->data->dev_private; - uint32_t i; - - for (i = 0; i < szedata2_ibuf_count; i++) { - ibuf_mac_mode_write(ibuf_ptr_by_index(internals->pci_rsc, i), - SZEDATA2_MAC_CHMODE_ALL_MULTICAST); - } + PMD_DRV_LOG(WARNING, "Enabling allmulticast mode is not supported."); } static void -eth_allmulticast_disable(struct rte_eth_dev *dev) +eth_allmulticast_disable(struct rte_eth_dev *dev __rte_unused) { - struct pmd_internals *internals = (struct pmd_internals *) - dev->data->dev_private; - uint32_t i; - - for (i = 0; i < szedata2_ibuf_count; i++) { - ibuf_mac_mode_write(ibuf_ptr_by_index(internals->pci_rsc, i), - SZEDATA2_MAC_CHMODE_ONLY_VALID); - } + PMD_DRV_LOG(WARNING, "Disabling allmulticast mode is not supported."); } static const struct eth_dev_ops ops = { @@ -1417,9 +1407,9 @@ get_szedata2_index(const struct rte_pci_addr *pcislot_addr, uint32_t *index) FILE *fd; char pcislot_path[PATH_MAX]; uint32_t domain; - uint32_t bus; - uint32_t devid; - uint32_t function; + uint8_t bus; + uint8_t devid; + uint8_t function; dir = opendir("/sys/class/combo"); if (dir == NULL) @@ -1444,7 +1434,7 @@ get_szedata2_index(const struct rte_pci_addr *pcislot_addr, uint32_t *index) if (fd == NULL) continue; - ret = fscanf(fd, "%4" PRIx16 ":%2" PRIx8 ":%2" PRIx8 ".%" PRIx8, + ret = fscanf(fd, "%8" SCNx32 ":%2" SCNx8 ":%2" SCNx8 ".%" SCNx8, &domain, &bus, &devid, &function); fclose(fd); if (ret != 4) @@ -1464,109 +1454,62 @@ get_szedata2_index(const struct rte_pci_addr *pcislot_addr, uint32_t *index) return -1; } +/** + * @brief Initializes rte_eth_dev device. + * @param dev Device to initialize. + * @param pi Structure with info about DMA queues. + * @return 0 on success, negative error code on error. + */ static int -rte_szedata2_eth_dev_init(struct rte_eth_dev *dev) +rte_szedata2_eth_dev_init(struct rte_eth_dev *dev, struct port_info *pi) { + int ret; + uint32_t szedata2_index; + char name[PATH_MAX]; struct rte_eth_dev_data *data = dev->data; struct pmd_internals *internals = (struct pmd_internals *) data->dev_private; - struct szedata *szedata_temp; - int ret; - uint32_t szedata2_index; struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev); - struct rte_pci_addr *pci_addr = &pci_dev->addr; - struct rte_mem_resource *pci_rsc = - &pci_dev->mem_resource[PCI_RESOURCE_NUMBER]; - char rsc_filename[PATH_MAX]; - void *pci_resource_ptr = NULL; - int fd; - RTE_LOG(INFO, PMD, "Initializing szedata2 device (" PCI_PRI_FMT ")\n", - pci_addr->domain, pci_addr->bus, pci_addr->devid, - pci_addr->function); + PMD_INIT_FUNC_TRACE(); + PMD_INIT_LOG(INFO, "Initializing eth_dev %s (driver %s)", data->name, + dev->device->driver->name); + + /* Fill internal private structure. */ + internals->dev = dev; /* Get index of szedata2 device file and create path to device file */ - ret = get_szedata2_index(pci_addr, &szedata2_index); + ret = get_szedata2_index(&pci_dev->addr, &szedata2_index); if (ret != 0) { - RTE_LOG(ERR, PMD, "Failed to get szedata2 device index!\n"); + PMD_INIT_LOG(ERR, "Failed to get szedata2 device index!"); return -ENODEV; } - snprintf(internals->sze_dev, PATH_MAX, SZEDATA2_DEV_PATH_FMT, - szedata2_index); - - RTE_LOG(INFO, PMD, "SZEDATA2 path: %s\n", internals->sze_dev); - - /* - * Get number of available DMA RX and TX channels, which is maximum - * number of queues that can be created and store it in private device - * data structure. - */ - szedata_temp = szedata_open(internals->sze_dev); - if (szedata_temp == NULL) { - RTE_LOG(ERR, PMD, "szedata_open(): failed to open %s", - internals->sze_dev); - return -EINVAL; + snprintf(name, PATH_MAX, SZEDATA2_DEV_PATH_FMT, szedata2_index); + internals->sze_dev_path = strdup(name); + if (internals->sze_dev_path == NULL) { + PMD_INIT_LOG(ERR, "strdup() failed!"); + return -ENOMEM; } - internals->max_rx_queues = szedata_ifaces_available(szedata_temp, - SZE2_DIR_RX); - internals->max_tx_queues = szedata_ifaces_available(szedata_temp, - SZE2_DIR_TX); - szedata_close(szedata_temp); - - RTE_LOG(INFO, PMD, "Available DMA channels RX: %u TX: %u\n", - internals->max_rx_queues, internals->max_tx_queues); + PMD_INIT_LOG(INFO, "SZEDATA2 path: %s", internals->sze_dev_path); + internals->max_rx_queues = pi->rx_count; + internals->max_tx_queues = pi->tx_count; + internals->rxq_base_id = pi->rx_base_id; + internals->txq_base_id = pi->tx_base_id; + PMD_INIT_LOG(INFO, "%u RX DMA channels from id %u", + internals->max_rx_queues, internals->rxq_base_id); + PMD_INIT_LOG(INFO, "%u TX DMA channels from id %u", + internals->max_tx_queues, internals->txq_base_id); /* Set rx, tx burst functions */ - if (data->dev_conf.rxmode.enable_scatter == 1 || - data->scattered_rx == 1) { + if (data->scattered_rx == 1) dev->rx_pkt_burst = eth_szedata2_rx_scattered; - data->scattered_rx = 1; - } else { + else dev->rx_pkt_burst = eth_szedata2_rx; - data->scattered_rx = 0; - } dev->tx_pkt_burst = eth_szedata2_tx; /* Set function callbacks for Ethernet API */ dev->dev_ops = &ops; - rte_eth_copy_pci_info(dev, pci_dev); - - /* mmap pci resource0 file to rte_mem_resource structure */ - if (pci_dev->mem_resource[PCI_RESOURCE_NUMBER].phys_addr == - 0) { - RTE_LOG(ERR, PMD, "Missing resource%u file\n", - PCI_RESOURCE_NUMBER); - return -EINVAL; - } - snprintf(rsc_filename, PATH_MAX, - "%s/" PCI_PRI_FMT "/resource%u", rte_pci_get_sysfs_path(), - pci_addr->domain, pci_addr->bus, - pci_addr->devid, pci_addr->function, PCI_RESOURCE_NUMBER); - fd = open(rsc_filename, O_RDWR); - if (fd < 0) { - RTE_LOG(ERR, PMD, "Could not open file %s\n", rsc_filename); - return -EINVAL; - } - - pci_resource_ptr = mmap(0, - pci_dev->mem_resource[PCI_RESOURCE_NUMBER].len, - PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); - close(fd); - if (pci_resource_ptr == MAP_FAILED) { - RTE_LOG(ERR, PMD, "Could not mmap file %s (fd = %d)\n", - rsc_filename, fd); - return -EINVAL; - } - pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr = pci_resource_ptr; - internals->pci_rsc = pci_rsc; - - RTE_LOG(DEBUG, PMD, "resource%u phys_addr = 0x%llx len = %llu " - "virt addr = %llx\n", PCI_RESOURCE_NUMBER, - (unsigned long long)pci_rsc->phys_addr, - (unsigned long long)pci_rsc->len, - (unsigned long long)pci_rsc->addr); - /* Get link state */ eth_link_update(dev, 0); @@ -1574,40 +1517,37 @@ rte_szedata2_eth_dev_init(struct rte_eth_dev *dev) data->mac_addrs = rte_zmalloc(data->name, sizeof(struct ether_addr), RTE_CACHE_LINE_SIZE); if (data->mac_addrs == NULL) { - RTE_LOG(ERR, PMD, "Could not alloc space for MAC address!\n"); - munmap(pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr, - pci_dev->mem_resource[PCI_RESOURCE_NUMBER].len); - return -EINVAL; + PMD_INIT_LOG(ERR, "Could not alloc space for MAC address!"); + free(internals->sze_dev_path); + return -ENOMEM; } ether_addr_copy(ð_addr, data->mac_addrs); - /* At initial state COMBO card is in promiscuous mode so disable it */ - eth_promiscuous_disable(dev); - - RTE_LOG(INFO, PMD, "szedata2 device (" - PCI_PRI_FMT ") successfully initialized\n", - pci_addr->domain, pci_addr->bus, pci_addr->devid, - pci_addr->function); + PMD_INIT_LOG(INFO, "%s device %s successfully initialized", + dev->device->driver->name, data->name); return 0; } +/** + * @brief Unitializes rte_eth_dev device. + * @param dev Device to uninitialize. + * @return 0 on success, negative error code on error. + */ static int rte_szedata2_eth_dev_uninit(struct rte_eth_dev *dev) { - struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev); - struct rte_pci_addr *pci_addr = &pci_dev->addr; + struct pmd_internals *internals = (struct pmd_internals *) + dev->data->dev_private; + + PMD_INIT_FUNC_TRACE(); + free(internals->sze_dev_path); rte_free(dev->data->mac_addrs); - dev->data->mac_addrs = NULL; - munmap(pci_dev->mem_resource[PCI_RESOURCE_NUMBER].addr, - pci_dev->mem_resource[PCI_RESOURCE_NUMBER].len); - RTE_LOG(INFO, PMD, "szedata2 device (" - PCI_PRI_FMT ") successfully uninitialized\n", - pci_addr->domain, pci_addr->bus, pci_addr->devid, - pci_addr->function); + PMD_DRV_LOG(INFO, "%s device %s successfully uninitialized", + dev->device->driver->name, dev->data->name); return 0; } @@ -1626,21 +1566,349 @@ static const struct rte_pci_id rte_szedata2_pci_id_table[] = { PCI_DEVICE_ID_NETCOPE_COMBO100G2) }, { + RTE_PCI_DEVICE(PCI_VENDOR_ID_NETCOPE, + PCI_DEVICE_ID_NETCOPE_NFB200G2QL) + }, + { .vendor_id = 0, } }; +/** + * @brief Gets info about DMA queues for ports. + * @param pci_dev PCI device structure. + * @param port_count Pointer to variable set with number of ports. + * @param pi Pointer to array of structures with info about DMA queues + * for ports. + * @param max_ports Maximum number of ports. + * @return 0 on success, negative error code on error. + */ +static int +get_port_info(struct rte_pci_device *pci_dev, unsigned int *port_count, + struct port_info *pi, unsigned int max_ports) +{ + struct szedata *szedata_temp; + char sze_dev_path[PATH_MAX]; + uint32_t szedata2_index; + int ret; + uint16_t max_rx_queues; + uint16_t max_tx_queues; + + if (max_ports == 0) + return -EINVAL; + + memset(pi, 0, max_ports * sizeof(struct port_info)); + *port_count = 0; + + /* Get index of szedata2 device file and create path to device file */ + ret = get_szedata2_index(&pci_dev->addr, &szedata2_index); + if (ret != 0) { + PMD_INIT_LOG(ERR, "Failed to get szedata2 device index!"); + return -ENODEV; + } + snprintf(sze_dev_path, PATH_MAX, SZEDATA2_DEV_PATH_FMT, szedata2_index); + + /* + * Get number of available DMA RX and TX channels, which is maximum + * number of queues that can be created. + */ + szedata_temp = szedata_open(sze_dev_path); + if (szedata_temp == NULL) { + PMD_INIT_LOG(ERR, "szedata_open(%s) failed", sze_dev_path); + return -EINVAL; + } + max_rx_queues = szedata_ifaces_available(szedata_temp, SZE2_DIR_RX); + max_tx_queues = szedata_ifaces_available(szedata_temp, SZE2_DIR_TX); + PMD_INIT_LOG(INFO, "Available DMA channels RX: %u TX: %u", + max_rx_queues, max_tx_queues); + if (max_rx_queues > RTE_ETH_SZEDATA2_MAX_RX_QUEUES) { + PMD_INIT_LOG(ERR, "%u RX queues exceeds supported number %u", + max_rx_queues, RTE_ETH_SZEDATA2_MAX_RX_QUEUES); + szedata_close(szedata_temp); + return -EINVAL; + } + if (max_tx_queues > RTE_ETH_SZEDATA2_MAX_TX_QUEUES) { + PMD_INIT_LOG(ERR, "%u TX queues exceeds supported number %u", + max_tx_queues, RTE_ETH_SZEDATA2_MAX_TX_QUEUES); + szedata_close(szedata_temp); + return -EINVAL; + } + + if (pci_dev->id.device_id == PCI_DEVICE_ID_NETCOPE_NFB200G2QL) { + unsigned int i; + unsigned int rx_queues = max_rx_queues / max_ports; + unsigned int tx_queues = max_tx_queues / max_ports; + + /* + * Number of queues reported by szedata_ifaces_available() + * is the number of all queues from all DMA controllers which + * may reside at different numa locations. + * All queues from the same DMA controller have the same numa + * node. + * Numa node from the first queue of each DMA controller is + * retrieved. + * If the numa node differs from the numa node of the queues + * from the previous DMA controller the queues are assigned + * to the next port. + */ + + for (i = 0; i < max_ports; i++) { + int numa_rx = szedata_get_area_numa_node(szedata_temp, + SZE2_DIR_RX, rx_queues * i); + int numa_tx = szedata_get_area_numa_node(szedata_temp, + SZE2_DIR_TX, tx_queues * i); + unsigned int port_rx_queues = numa_rx != -1 ? + rx_queues : 0; + unsigned int port_tx_queues = numa_tx != -1 ? + tx_queues : 0; + PMD_INIT_LOG(DEBUG, "%u rx queues from id %u, numa %d", + rx_queues, rx_queues * i, numa_rx); + PMD_INIT_LOG(DEBUG, "%u tx queues from id %u, numa %d", + tx_queues, tx_queues * i, numa_tx); + + if (port_rx_queues != 0 && port_tx_queues != 0 && + numa_rx != numa_tx) { + PMD_INIT_LOG(ERR, "RX queue %u numa %d differs " + "from TX queue %u numa %d " + "unexpectedly", + rx_queues * i, numa_rx, + tx_queues * i, numa_tx); + szedata_close(szedata_temp); + return -EINVAL; + } else if (port_rx_queues == 0 && port_tx_queues == 0) { + continue; + } else { + unsigned int j; + unsigned int current = *port_count; + int port_numa = port_rx_queues != 0 ? + numa_rx : numa_tx; + + for (j = 0; j < *port_count; j++) { + if (pi[j].numa_node == + port_numa) { + current = j; + break; + } + } + if (pi[current].rx_count == 0 && + pi[current].tx_count == 0) { + pi[current].rx_base_id = rx_queues * i; + pi[current].tx_base_id = tx_queues * i; + (*port_count)++; + } else if ((rx_queues * i != + pi[current].rx_base_id + + pi[current].rx_count) || + (tx_queues * i != + pi[current].tx_base_id + + pi[current].tx_count)) { + PMD_INIT_LOG(ERR, "Queue ids does not " + "fulfill constraints"); + szedata_close(szedata_temp); + return -EINVAL; + } + pi[current].rx_count += port_rx_queues; + pi[current].tx_count += port_tx_queues; + pi[current].numa_node = port_numa; + } + } + } else { + pi[0].rx_count = max_rx_queues; + pi[0].tx_count = max_tx_queues; + pi[0].numa_node = pci_dev->device.numa_node; + *port_count = 1; + } + + szedata_close(szedata_temp); + return 0; +} + +/** + * @brief Allocates rte_eth_dev device. + * @param pci_dev Corresponding PCI device. + * @param numa_node NUMA node on which device is allocated. + * @param port_no Id of rte_eth_device created on PCI device pci_dev. + * @return Pointer to allocated device or NULL on error. + */ +static struct rte_eth_dev * +szedata2_eth_dev_allocate(struct rte_pci_device *pci_dev, int numa_node, + unsigned int port_no) +{ + struct rte_eth_dev *eth_dev; + char name[RTE_ETH_NAME_MAX_LEN]; + + PMD_INIT_FUNC_TRACE(); + + snprintf(name, RTE_ETH_NAME_MAX_LEN, "%s" + SZEDATA2_ETH_DEV_NAME_SUFFIX_FMT, + pci_dev->device.name, port_no); + PMD_INIT_LOG(DEBUG, "Allocating eth_dev %s", name); + + if (rte_eal_process_type() == RTE_PROC_PRIMARY) { + eth_dev = rte_eth_dev_allocate(name); + if (!eth_dev) + return NULL; + + eth_dev->data->dev_private = rte_zmalloc_socket(name, + sizeof(struct pmd_internals), RTE_CACHE_LINE_SIZE, + numa_node); + if (!eth_dev->data->dev_private) { + rte_eth_dev_release_port(eth_dev); + return NULL; + } + } else { + eth_dev = rte_eth_dev_attach_secondary(name); + if (!eth_dev) + return NULL; + } + + eth_dev->device = &pci_dev->device; + rte_eth_copy_pci_info(eth_dev, pci_dev); + eth_dev->data->numa_node = numa_node; + return eth_dev; +} + +/** + * @brief Releases interval of rte_eth_dev devices from array. + * @param eth_devs Array of pointers to rte_eth_dev devices. + * @param from Index in array eth_devs to start with. + * @param to Index in array right after the last element to release. + * + * Used for releasing at failed initialization. + */ +static void +szedata2_eth_dev_release_interval(struct rte_eth_dev **eth_devs, + unsigned int from, unsigned int to) +{ + unsigned int i; + + PMD_INIT_FUNC_TRACE(); + + for (i = from; i < to; i++) { + rte_szedata2_eth_dev_uninit(eth_devs[i]); + rte_eth_dev_pci_release(eth_devs[i]); + } +} + +/** + * @brief Callback .probe for struct rte_pci_driver. + */ static int szedata2_eth_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, struct rte_pci_device *pci_dev) { - return rte_eth_dev_pci_generic_probe(pci_dev, - sizeof(struct pmd_internals), rte_szedata2_eth_dev_init); + struct port_info port_info[SZEDATA2_MAX_PORTS]; + unsigned int port_count; + int ret; + unsigned int i; + struct pci_dev_list_entry *list_entry; + struct rte_eth_dev *eth_devs[SZEDATA2_MAX_PORTS] = {NULL,}; + + PMD_INIT_FUNC_TRACE(); + + ret = get_port_info(pci_dev, &port_count, port_info, + SZEDATA2_MAX_PORTS); + if (ret != 0) + return ret; + + if (port_count == 0) { + PMD_INIT_LOG(ERR, "No available ports!"); + return -ENODEV; + } + + list_entry = rte_zmalloc(NULL, sizeof(struct pci_dev_list_entry), + RTE_CACHE_LINE_SIZE); + if (list_entry == NULL) { + PMD_INIT_LOG(ERR, "rte_zmalloc() failed!"); + return -ENOMEM; + } + + for (i = 0; i < port_count; i++) { + eth_devs[i] = szedata2_eth_dev_allocate(pci_dev, + port_info[i].numa_node, i); + if (eth_devs[i] == NULL) { + PMD_INIT_LOG(ERR, "Failed to alloc eth_dev for port %u", + i); + szedata2_eth_dev_release_interval(eth_devs, 0, i); + rte_free(list_entry); + return -ENOMEM; + } + + ret = rte_szedata2_eth_dev_init(eth_devs[i], &port_info[i]); + if (ret != 0) { + PMD_INIT_LOG(ERR, "Failed to init eth_dev for port %u", + i); + rte_eth_dev_pci_release(eth_devs[i]); + szedata2_eth_dev_release_interval(eth_devs, 0, i); + rte_free(list_entry); + return ret; + } + + rte_eth_dev_probing_finish(eth_devs[i]); + } + + /* + * Add pci_dev to list of PCI devices for this driver + * which is used at remove callback to release all created eth_devs. + */ + list_entry->pci_dev = pci_dev; + list_entry->port_count = port_count; + LIST_INSERT_HEAD(&szedata2_pci_dev_list, list_entry, next); + return 0; } +/** + * @brief Callback .remove for struct rte_pci_driver. + */ static int szedata2_eth_pci_remove(struct rte_pci_device *pci_dev) { - return rte_eth_dev_pci_generic_remove(pci_dev, - rte_szedata2_eth_dev_uninit); + unsigned int i; + unsigned int port_count; + char name[RTE_ETH_NAME_MAX_LEN]; + struct rte_eth_dev *eth_dev; + int ret; + int retval = 0; + bool found = false; + struct pci_dev_list_entry *list_entry = NULL; + + PMD_INIT_FUNC_TRACE(); + + LIST_FOREACH(list_entry, &szedata2_pci_dev_list, next) { + if (list_entry->pci_dev == pci_dev) { + port_count = list_entry->port_count; + found = true; + break; + } + } + LIST_REMOVE(list_entry, next); + rte_free(list_entry); + + if (!found) { + PMD_DRV_LOG(ERR, "PCI device " PCI_PRI_FMT " not found", + pci_dev->addr.domain, pci_dev->addr.bus, + pci_dev->addr.devid, pci_dev->addr.function); + return -ENODEV; + } + + for (i = 0; i < port_count; i++) { + snprintf(name, RTE_ETH_NAME_MAX_LEN, "%s" + SZEDATA2_ETH_DEV_NAME_SUFFIX_FMT, + pci_dev->device.name, i); + PMD_DRV_LOG(DEBUG, "Removing eth_dev %s", name); + eth_dev = rte_eth_dev_allocated(name); + if (!eth_dev) { + PMD_DRV_LOG(ERR, "eth_dev %s not found", name); + retval = retval ? retval : -ENODEV; + } + + ret = rte_szedata2_eth_dev_uninit(eth_dev); + if (ret != 0) { + PMD_DRV_LOG(ERR, "eth_dev %s uninit failed", name); + retval = retval ? retval : ret; + } + + rte_eth_dev_pci_release(eth_dev); + } + + return retval; } static struct rte_pci_driver szedata2_eth_driver = { @@ -1652,4 +1920,16 @@ static struct rte_pci_driver szedata2_eth_driver = { RTE_PMD_REGISTER_PCI(RTE_SZEDATA2_DRIVER_NAME, szedata2_eth_driver); RTE_PMD_REGISTER_PCI_TABLE(RTE_SZEDATA2_DRIVER_NAME, rte_szedata2_pci_id_table); RTE_PMD_REGISTER_KMOD_DEP(RTE_SZEDATA2_DRIVER_NAME, - "* combo6core & combov3 & szedata2 & szedata2_cv3"); + "* combo6core & combov3 & szedata2 & ( szedata2_cv3 | szedata2_cv3_fdt )"); + +RTE_INIT(szedata2_init_log); +static void +szedata2_init_log(void) +{ + szedata2_logtype_init = rte_log_register("pmd.net.szedata2.init"); + if (szedata2_logtype_init >= 0) + rte_log_set_level(szedata2_logtype_init, RTE_LOG_NOTICE); + szedata2_logtype_driver = rte_log_register("pmd.net.szedata2.driver"); + if (szedata2_logtype_driver >= 0) + rte_log_set_level(szedata2_logtype_driver, RTE_LOG_NOTICE); +} diff --git a/drivers/net/szedata2/rte_eth_szedata2.h b/drivers/net/szedata2/rte_eth_szedata2.h index f25d4c59..26a82b35 100644 --- a/drivers/net/szedata2/rte_eth_szedata2.h +++ b/drivers/net/szedata2/rte_eth_szedata2.h @@ -1,34 +1,5 @@ -/*- - * BSD LICENSE - * - * Copyright (c) 2015 - 2016 CESNET - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of CESNET nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2015 - 2016 CESNET */ #ifndef RTE_PMD_SZEDATA2_H_ @@ -47,9 +18,7 @@ #define PCI_DEVICE_ID_NETCOPE_COMBO80G 0xcb80 #define PCI_DEVICE_ID_NETCOPE_COMBO100G 0xc1c1 #define PCI_DEVICE_ID_NETCOPE_COMBO100G2 0xc2c1 - -/* number of PCI resource used by COMBO card */ -#define PCI_RESOURCE_NUMBER 0 +#define PCI_DEVICE_ID_NETCOPE_NFB200G2QL 0xc250 /* szedata2_packet header length == 4 bytes == 2B segment size + 2B hw size */ #define RTE_SZE2_PACKET_HEADER_SIZE 4 diff --git a/drivers/net/szedata2/szedata2_iobuf.c b/drivers/net/szedata2/szedata2_iobuf.c deleted file mode 100644 index 3b9a71fe..00000000 --- a/drivers/net/szedata2/szedata2_iobuf.c +++ /dev/null @@ -1,203 +0,0 @@ -/*- - * BSD LICENSE - * - * Copyright (c) 2017 CESNET - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of CESNET nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <stdint.h> - -#include <rte_common.h> - -#include "szedata2_iobuf.h" - -/* - * IBUFs and OBUFs can generally be located at different offsets in different - * firmwares (modes). - * This part defines base offsets of IBUFs and OBUFs for various cards - * and firmwares (modes). - * Type of firmware (mode) is set through configuration option - * CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS. - * Possible values are: - * 0 - for cards (modes): - * NFB-100G1 (100G1) - * - * 1 - for cards (modes): - * NFB-100G2Q (100G1) - * - * 2 - for cards (modes): - * NFB-40G2 (40G2) - * NFB-100G2C (100G2) - * NFB-100G2Q (40G2) - * - * 3 - for cards (modes): - * NFB-40G2 (10G8) - * NFB-100G2Q (10G8) - * - * 4 - for cards (modes): - * NFB-100G1 (10G10) - * - * 5 - for experimental firmwares and future use - */ -#if !defined(RTE_LIBRTE_PMD_SZEDATA2_AS) -#error "RTE_LIBRTE_PMD_SZEDATA2_AS has to be defined" -#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 0 - -/* - * Cards (modes): - * NFB-100G1 (100G1) - */ - -const uint32_t szedata2_ibuf_base_table[] = { - 0x8000 -}; -const uint32_t szedata2_obuf_base_table[] = { - 0x9000 -}; - -#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 1 - -/* - * Cards (modes): - * NFB-100G2Q (100G1) - */ - -const uint32_t szedata2_ibuf_base_table[] = { - 0x8800 -}; -const uint32_t szedata2_obuf_base_table[] = { - 0x9800 -}; - -#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 2 - -/* - * Cards (modes): - * NFB-40G2 (40G2) - * NFB-100G2C (100G2) - * NFB-100G2Q (40G2) - */ - -const uint32_t szedata2_ibuf_base_table[] = { - 0x8000, - 0x8800 -}; -const uint32_t szedata2_obuf_base_table[] = { - 0x9000, - 0x9800 -}; - -#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 3 - -/* - * Cards (modes): - * NFB-40G2 (10G8) - * NFB-100G2Q (10G8) - */ - -const uint32_t szedata2_ibuf_base_table[] = { - 0x8000, - 0x8200, - 0x8400, - 0x8600, - 0x8800, - 0x8A00, - 0x8C00, - 0x8E00 -}; -const uint32_t szedata2_obuf_base_table[] = { - 0x9000, - 0x9200, - 0x9400, - 0x9600, - 0x9800, - 0x9A00, - 0x9C00, - 0x9E00 -}; - -#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 4 - -/* - * Cards (modes): - * NFB-100G1 (10G10) - */ - -const uint32_t szedata2_ibuf_base_table[] = { - 0x8000, - 0x8200, - 0x8400, - 0x8600, - 0x8800, - 0x8A00, - 0x8C00, - 0x8E00, - 0x9000, - 0x9200 -}; -const uint32_t szedata2_obuf_base_table[] = { - 0xA000, - 0xA200, - 0xA400, - 0xA600, - 0xA800, - 0xAA00, - 0xAC00, - 0xAE00, - 0xB000, - 0xB200 -}; - -#elif RTE_LIBRTE_PMD_SZEDATA2_AS == 5 - -/* - * Future use and experimental firmwares. - */ - -const uint32_t szedata2_ibuf_base_table[] = { - 0x8000, - 0x8200, - 0x8400, - 0x8600, - 0x8800 -}; -const uint32_t szedata2_obuf_base_table[] = { - 0x9000, - 0x9200, - 0x9400, - 0x9600, - 0x9800 -}; - -#else -#error "RTE_LIBRTE_PMD_SZEDATA2_AS has wrong value, see comments in config file" -#endif - -const uint32_t szedata2_ibuf_count = RTE_DIM(szedata2_ibuf_base_table); -const uint32_t szedata2_obuf_count = RTE_DIM(szedata2_obuf_base_table); diff --git a/drivers/net/szedata2/szedata2_iobuf.h b/drivers/net/szedata2/szedata2_iobuf.h deleted file mode 100644 index f1ccb3b2..00000000 --- a/drivers/net/szedata2/szedata2_iobuf.h +++ /dev/null @@ -1,356 +0,0 @@ -/*- - * BSD LICENSE - * - * Copyright (c) 2017 CESNET - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of CESNET nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SZEDATA2_IOBUF_H_ -#define _SZEDATA2_IOBUF_H_ - -#include <stdint.h> -#include <stdbool.h> - -#include <rte_byteorder.h> -#include <rte_io.h> -#include <rte_dev.h> - -/* IBUF offsets from the beginning of the PCI resource address space. */ -extern const uint32_t szedata2_ibuf_base_table[]; -extern const uint32_t szedata2_ibuf_count; - -/* OBUF offsets from the beginning of the PCI resource address space. */ -extern const uint32_t szedata2_obuf_base_table[]; -extern const uint32_t szedata2_obuf_count; - -enum szedata2_link_speed { - SZEDATA2_LINK_SPEED_DEFAULT = 0, - SZEDATA2_LINK_SPEED_10G, - SZEDATA2_LINK_SPEED_40G, - SZEDATA2_LINK_SPEED_100G, -}; - -enum szedata2_mac_check_mode { - SZEDATA2_MAC_CHMODE_PROMISC = 0x0, - SZEDATA2_MAC_CHMODE_ONLY_VALID = 0x1, - SZEDATA2_MAC_CHMODE_ALL_BROADCAST = 0x2, - SZEDATA2_MAC_CHMODE_ALL_MULTICAST = 0x3, -}; - -/** - * Macro takes pointer to pci resource structure (rsc) - * and returns pointer to mapped resource memory at - * specified offset (offset) typecast to the type (type). - */ -#define SZEDATA2_PCI_RESOURCE_PTR(rsc, offset, type) \ - ((type)(((uint8_t *)(rsc)->addr) + (offset))) - -/** - * Maximum possible number of MAC addresses (limited by IBUF status - * register value MAC_COUNT which has 5 bits). - */ -#define SZEDATA2_IBUF_MAX_MAC_COUNT 32 - -/** - * Structure describes IBUF address space. - */ -struct szedata2_ibuf { - /** Total Received Frames Counter low part */ - uint32_t trfcl; /**< 0x00 */ - /** Correct Frames Counter low part */ - uint32_t cfcl; /**< 0x04 */ - /** Discarded Frames Counter low part */ - uint32_t dfcl; /**< 0x08 */ - /** Counter of frames discarded due to buffer overflow low part */ - uint32_t bodfcl; /**< 0x0C */ - /** Total Received Frames Counter high part */ - uint32_t trfch; /**< 0x10 */ - /** Correct Frames Counter high part */ - uint32_t cfch; /**< 0x14 */ - /** Discarded Frames Counter high part */ - uint32_t dfch; /**< 0x18 */ - /** Counter of frames discarded due to buffer overflow high part */ - uint32_t bodfch; /**< 0x1C */ - /** IBUF enable register */ - uint32_t ibuf_en; /**< 0x20 */ - /** Error mask register */ - uint32_t err_mask; /**< 0x24 */ - /** IBUF status register */ - uint32_t ibuf_st; /**< 0x28 */ - /** IBUF command register */ - uint32_t ibuf_cmd; /**< 0x2C */ - /** Minimum frame length allowed */ - uint32_t mfla; /**< 0x30 */ - /** Frame MTU */ - uint32_t mtu; /**< 0x34 */ - /** MAC address check mode */ - uint32_t mac_chmode; /**< 0x38 */ - /** Octets Received OK Counter low part */ - uint32_t orocl; /**< 0x3C */ - /** Octets Received OK Counter high part */ - uint32_t oroch; /**< 0x40 */ - /** reserved */ - uint8_t reserved[60]; /**< 0x4C */ - /** IBUF memory for MAC addresses */ - uint32_t mac_mem[2 * SZEDATA2_IBUF_MAX_MAC_COUNT]; /**< 0x80 */ -} __rte_packed; - -/** - * Structure describes OBUF address space. - */ -struct szedata2_obuf { - /** Total Sent Frames Counter low part */ - uint32_t tsfcl; /**< 0x00 */ - /** Octets Sent Counter low part */ - uint32_t oscl; /**< 0x04 */ - /** Total Discarded Frames Counter low part */ - uint32_t tdfcl; /**< 0x08 */ - /** reserved */ - uint32_t reserved1; /**< 0x0C */ - /** Total Sent Frames Counter high part */ - uint32_t tsfch; /**< 0x10 */ - /** Octets Sent Counter high part */ - uint32_t osch; /**< 0x14 */ - /** Total Discarded Frames Counter high part */ - uint32_t tdfch; /**< 0x18 */ - /** reserved */ - uint32_t reserved2; /**< 0x1C */ - /** OBUF enable register */ - uint32_t obuf_en; /**< 0x20 */ - /** reserved */ - uint64_t reserved3; /**< 0x24 */ - /** OBUF control register */ - uint32_t ctrl; /**< 0x2C */ - /** OBUF status register */ - uint32_t obuf_st; /**< 0x30 */ -} __rte_packed; - -/** - * Wrapper for reading 4 bytes from device memory in correct endianness. - * - * @param addr - * Address for reading. - * @return - * 4 B value. - */ -static inline uint32_t -szedata2_read32(const volatile void *addr) -{ - return rte_le_to_cpu_32(rte_read32(addr)); -} - -/** - * Wrapper for writing 4 bytes to device memory in correct endianness. - * - * @param value - * Value to write. - * @param addr - * Address for writing. - */ -static inline void -szedata2_write32(uint32_t value, volatile void *addr) -{ - rte_write32(rte_cpu_to_le_32(value), addr); -} - -/** - * Get pointer to IBUF structure according to specified index. - * - * @param rsc - * Pointer to base address of memory resource. - * @param index - * Index of IBUF. - * @return - * Pointer to IBUF structure. - */ -static inline struct szedata2_ibuf * -ibuf_ptr_by_index(struct rte_mem_resource *rsc, uint32_t index) -{ - if (index >= szedata2_ibuf_count) - index = szedata2_ibuf_count - 1; - return SZEDATA2_PCI_RESOURCE_PTR(rsc, szedata2_ibuf_base_table[index], - struct szedata2_ibuf *); -} - -/** - * Get pointer to OBUF structure according to specified idnex. - * - * @param rsc - * Pointer to base address of memory resource. - * @param index - * Index of OBUF. - * @return - * Pointer to OBUF structure. - */ -static inline struct szedata2_obuf * -obuf_ptr_by_index(struct rte_mem_resource *rsc, uint32_t index) -{ - if (index >= szedata2_obuf_count) - index = szedata2_obuf_count - 1; - return SZEDATA2_PCI_RESOURCE_PTR(rsc, szedata2_obuf_base_table[index], - struct szedata2_obuf *); -} - -/** - * Checks if IBUF is enabled. - * - * @param ibuf - * Pointer to IBUF structure. - * @return - * true if IBUF is enabled. - * false if IBUF is disabled. - */ -static inline bool -ibuf_is_enabled(const volatile struct szedata2_ibuf *ibuf) -{ - return ((szedata2_read32(&ibuf->ibuf_en) & 0x1) != 0) ? true : false; -} - -/** - * Enables IBUF. - * - * @param ibuf - * Pointer to IBUF structure. - */ -static inline void -ibuf_enable(volatile struct szedata2_ibuf *ibuf) -{ - szedata2_write32(szedata2_read32(&ibuf->ibuf_en) | 0x1, &ibuf->ibuf_en); -} - -/** - * Disables IBUF. - * - * @param ibuf - * Pointer to IBUF structure. - */ -static inline void -ibuf_disable(volatile struct szedata2_ibuf *ibuf) -{ - szedata2_write32(szedata2_read32(&ibuf->ibuf_en) & ~0x1, - &ibuf->ibuf_en); -} - -/** - * Checks if link is up. - * - * @param ibuf - * Pointer to IBUF structure. - * @return - * true if ibuf link is up. - * false if ibuf link is down. - */ -static inline bool -ibuf_is_link_up(const volatile struct szedata2_ibuf *ibuf) -{ - return ((szedata2_read32(&ibuf->ibuf_st) & 0x80) != 0) ? true : false; -} - -/** - * Get current MAC address check mode from IBUF. - * - * @param ibuf - * Pointer to IBUF structure. - * @return - * MAC address check mode constant. - */ -static inline enum szedata2_mac_check_mode -ibuf_mac_mode_read(const volatile struct szedata2_ibuf *ibuf) -{ - switch (szedata2_read32(&ibuf->mac_chmode) & 0x3) { - case 0x0: - return SZEDATA2_MAC_CHMODE_PROMISC; - case 0x1: - return SZEDATA2_MAC_CHMODE_ONLY_VALID; - case 0x2: - return SZEDATA2_MAC_CHMODE_ALL_BROADCAST; - case 0x3: - return SZEDATA2_MAC_CHMODE_ALL_MULTICAST; - default: - return SZEDATA2_MAC_CHMODE_PROMISC; - } -} - -/** - * Writes mode in MAC address check mode register in IBUF. - * - * @param ibuf - * Pointer to IBUF structure. - * @param mode - * MAC address check mode to set. - */ -static inline void -ibuf_mac_mode_write(volatile struct szedata2_ibuf *ibuf, - enum szedata2_mac_check_mode mode) -{ - szedata2_write32((szedata2_read32(&ibuf->mac_chmode) & ~0x3) | mode, - &ibuf->mac_chmode); -} - -/** - * Checks if obuf is enabled. - * - * @param obuf - * Pointer to OBUF structure. - * @return - * true if OBUF is enabled. - * false if OBUF is disabled. - */ -static inline bool -obuf_is_enabled(const volatile struct szedata2_obuf *obuf) -{ - return ((szedata2_read32(&obuf->obuf_en) & 0x1) != 0) ? true : false; -} - -/** - * Enables OBUF. - * - * @param obuf - * Pointer to OBUF structure. - */ -static inline void -obuf_enable(volatile struct szedata2_obuf *obuf) -{ - szedata2_write32(szedata2_read32(&obuf->obuf_en) | 0x1, &obuf->obuf_en); -} - -/** - * Disables OBUF. - * - * @param obuf - * Pointer to OBUF structure. - */ -static inline void -obuf_disable(volatile struct szedata2_obuf *obuf) -{ - szedata2_write32(szedata2_read32(&obuf->obuf_en) & ~0x1, - &obuf->obuf_en); -} - -#endif /* _SZEDATA2_IOBUF_H_ */ diff --git a/drivers/net/szedata2/szedata2_logs.h b/drivers/net/szedata2/szedata2_logs.h new file mode 100644 index 00000000..8d06ffa3 --- /dev/null +++ b/drivers/net/szedata2/szedata2_logs.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2018 CESNET + */ + +#ifndef _SZEDATA2_LOGS_H_ +#define _SZEDATA2_LOGS_H_ + +#include <rte_log.h> + +extern int szedata2_logtype_init; +#define PMD_INIT_LOG(level, fmt, args...) \ + rte_log(RTE_LOG_ ## level, szedata2_logtype_init, \ + "%s(): " fmt "\n", __func__, ## args) + +#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>") + +extern int szedata2_logtype_driver; +#define PMD_DRV_LOG(level, fmt, args...) \ + rte_log(RTE_LOG_ ## level, szedata2_logtype_driver, \ + "%s(): " fmt "\n", __func__, ## args) + +#endif /* _SZEDATA2_LOGS_H_ */ |