summaryrefslogtreecommitdiffstats
path: root/examples/l2fwd-cat/l2fwd-cat.c
diff options
context:
space:
mode:
Diffstat (limited to 'examples/l2fwd-cat/l2fwd-cat.c')
-rw-r--r--examples/l2fwd-cat/l2fwd-cat.c224
1 files changed, 224 insertions, 0 deletions
diff --git a/examples/l2fwd-cat/l2fwd-cat.c b/examples/l2fwd-cat/l2fwd-cat.c
new file mode 100644
index 00000000..8cce33b8
--- /dev/null
+++ b/examples/l2fwd-cat/l2fwd-cat.c
@@ -0,0 +1,224 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <inttypes.h>
+#include <rte_eal.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+#include <rte_lcore.h>
+#include <rte_mbuf.h>
+
+#include "cat.h"
+
+#define RX_RING_SIZE 128
+#define TX_RING_SIZE 512
+
+#define NUM_MBUFS 8191
+#define MBUF_CACHE_SIZE 250
+#define BURST_SIZE 32
+
+static const struct rte_eth_conf port_conf_default = {
+ .rxmode = { .max_rx_pkt_len = ETHER_MAX_LEN }
+};
+
+/* l2fwd-cat.c: CAT enabled, basic DPDK skeleton forwarding example. */
+
+/*
+ * Initializes a given port using global settings and with the RX buffers
+ * coming from the mbuf_pool passed as a parameter.
+ */
+static inline int
+port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+ struct rte_eth_conf port_conf = port_conf_default;
+ const uint16_t rx_rings = 1, tx_rings = 1;
+ int retval;
+ uint16_t q;
+
+ if (port >= rte_eth_dev_count())
+ return -1;
+
+ /* Configure the Ethernet device. */
+ retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
+ if (retval != 0)
+ return retval;
+
+ /* Allocate and set up 1 RX queue per Ethernet port. */
+ for (q = 0; q < rx_rings; q++) {
+ retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
+ rte_eth_dev_socket_id(port), NULL, mbuf_pool);
+ if (retval < 0)
+ return retval;
+ }
+
+ /* Allocate and set up 1 TX queue per Ethernet port. */
+ for (q = 0; q < tx_rings; q++) {
+ retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
+ rte_eth_dev_socket_id(port), NULL);
+ if (retval < 0)
+ return retval;
+ }
+
+ /* Start the Ethernet port. */
+ retval = rte_eth_dev_start(port);
+ if (retval < 0)
+ return retval;
+
+ /* Display the port MAC address. */
+ struct ether_addr addr;
+ rte_eth_macaddr_get(port, &addr);
+ printf("Port %u MAC: %02" PRIx8 " %02" PRIx8 " %02" PRIx8
+ " %02" PRIx8 " %02" PRIx8 " %02" PRIx8 "\n",
+ (unsigned)port,
+ addr.addr_bytes[0], addr.addr_bytes[1],
+ addr.addr_bytes[2], addr.addr_bytes[3],
+ addr.addr_bytes[4], addr.addr_bytes[5]);
+
+ /* Enable RX in promiscuous mode for the Ethernet device. */
+ rte_eth_promiscuous_enable(port);
+
+ return 0;
+}
+
+/*
+ * The lcore main. This is the main thread that does the work, reading from
+ * an input port and writing to an output port.
+ */
+static __attribute__((noreturn)) void
+lcore_main(void)
+{
+ const uint8_t nb_ports = rte_eth_dev_count();
+ uint8_t port;
+
+ /*
+ * Check that the port is on the same NUMA node as the polling thread
+ * for best performance.
+ */
+ for (port = 0; port < nb_ports; port++)
+ if (rte_eth_dev_socket_id(port) > 0 &&
+ rte_eth_dev_socket_id(port) !=
+ (int)rte_socket_id())
+ printf("WARNING, port %u is on remote NUMA node to "
+ "polling thread.\n\tPerformance will "
+ "not be optimal.\n", port);
+
+ printf("\nCore %u forwarding packets. [Ctrl+C to quit]\n",
+ rte_lcore_id());
+
+ /* Run until the application is quit or killed. */
+ for (;;) {
+ /*
+ * Receive packets on a port and forward them on the paired
+ * port. The mapping is 0 -> 1, 1 -> 0, 2 -> 3, 3 -> 2, etc.
+ */
+ for (port = 0; port < nb_ports; port++) {
+
+ /* Get burst of RX packets, from first port of pair. */
+ struct rte_mbuf *bufs[BURST_SIZE];
+ const uint16_t nb_rx = rte_eth_rx_burst(port, 0,
+ bufs, BURST_SIZE);
+
+ if (unlikely(nb_rx == 0))
+ continue;
+
+ /* Send burst of TX packets, to second port of pair. */
+ const uint16_t nb_tx = rte_eth_tx_burst(port ^ 1, 0,
+ bufs, nb_rx);
+
+ /* Free any unsent packets. */
+ if (unlikely(nb_tx < nb_rx)) {
+ uint16_t buf;
+ for (buf = nb_tx; buf < nb_rx; buf++)
+ rte_pktmbuf_free(bufs[buf]);
+ }
+ }
+ }
+}
+
+/*
+ * The main function, which does initialization and calls the per-lcore
+ * functions.
+ */
+int
+main(int argc, char *argv[])
+{
+ struct rte_mempool *mbuf_pool;
+ unsigned nb_ports;
+ uint8_t portid;
+
+ /* Initialize the Environment Abstraction Layer (EAL). */
+ int ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+
+ argc -= ret;
+ argv += ret;
+
+ /*
+ * Initialize the PQoS library and configure CAT.
+ * Please see l2fwd-cat documentation for more info.
+ */
+ ret = cat_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "PQOS: L3CA init failed!\n");
+
+ argc -= ret;
+ argv += ret;
+
+ /* Check that there is an even number of ports to send/receive on. */
+ nb_ports = rte_eth_dev_count();
+ if (nb_ports < 2 || (nb_ports & 1))
+ rte_exit(EXIT_FAILURE, "Error: number of ports must be even\n");
+
+ /* Creates a new mempool in memory to hold the mbufs. */
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
+ MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
+
+ if (mbuf_pool == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+ /* Initialize all ports. */
+ for (portid = 0; portid < nb_ports; portid++)
+ if (port_init(portid, mbuf_pool) != 0)
+ rte_exit(EXIT_FAILURE, "Cannot init port %"PRIu8 "\n",
+ portid);
+
+ if (rte_lcore_count() > 1)
+ printf("\nWARNING: Too many lcores enabled. Only 1 used.\n");
+
+ /* Call lcore_main on the master core only. */
+ lcore_main();
+
+ return 0;
+}