aboutsummaryrefslogtreecommitdiffstats
path: root/examples/vmdq_dcb/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'examples/vmdq_dcb/main.c')
-rw-r--r--examples/vmdq_dcb/main.c705
1 files changed, 705 insertions, 0 deletions
diff --git a/examples/vmdq_dcb/main.c b/examples/vmdq_dcb/main.c
new file mode 100644
index 00000000..62e1422a
--- /dev/null
+++ b/examples/vmdq_dcb/main.c
@@ -0,0 +1,705 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <sys/queue.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <assert.h>
+#include <errno.h>
+#include <signal.h>
+#include <stdarg.h>
+#include <inttypes.h>
+#include <getopt.h>
+
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_memzone.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_launch.h>
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+#include <rte_prefetch.h>
+#include <rte_lcore.h>
+#include <rte_per_lcore.h>
+#include <rte_branch_prediction.h>
+#include <rte_interrupts.h>
+#include <rte_pci.h>
+#include <rte_random.h>
+#include <rte_debug.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_ring.h>
+#include <rte_log.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+#include <rte_memcpy.h>
+
+/* basic constants used in application */
+#define MAX_QUEUES 1024
+/*
+ * 1024 queues require to meet the needs of a large number of vmdq_pools.
+ * (RX/TX_queue_nb * RX/TX_ring_descriptors_nb) per port.
+ */
+#define NUM_MBUFS_PER_PORT (MAX_QUEUES * RTE_MAX(RTE_TEST_RX_DESC_DEFAULT, \
+ RTE_TEST_TX_DESC_DEFAULT))
+#define MBUF_CACHE_SIZE 64
+
+#define MAX_PKT_BURST 32
+
+/*
+ * Configurable number of RX/TX ring descriptors
+ */
+#define RTE_TEST_RX_DESC_DEFAULT 128
+#define RTE_TEST_TX_DESC_DEFAULT 512
+
+#define INVALID_PORT_ID 0xFF
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask;
+static uint8_t ports[RTE_MAX_ETHPORTS];
+static unsigned num_ports;
+
+/* number of pools (if user does not specify any, 32 by default */
+static enum rte_eth_nb_pools num_pools = ETH_32_POOLS;
+static enum rte_eth_nb_tcs num_tcs = ETH_4_TCS;
+static uint16_t num_queues, num_vmdq_queues;
+static uint16_t vmdq_pool_base, vmdq_queue_base;
+static uint8_t rss_enable;
+
+/* empty vmdq+dcb configuration structure. Filled in programatically */
+static const struct rte_eth_conf vmdq_dcb_conf_default = {
+ .rxmode = {
+ .mq_mode = ETH_MQ_RX_VMDQ_DCB,
+ .split_hdr_size = 0,
+ .header_split = 0, /**< Header Split disabled */
+ .hw_ip_checksum = 0, /**< IP checksum offload disabled */
+ .hw_vlan_filter = 0, /**< VLAN filtering disabled */
+ .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
+ },
+ .txmode = {
+ .mq_mode = ETH_MQ_TX_VMDQ_DCB,
+ },
+ /*
+ * should be overridden separately in code with
+ * appropriate values
+ */
+ .rx_adv_conf = {
+ .vmdq_dcb_conf = {
+ .nb_queue_pools = ETH_32_POOLS,
+ .enable_default_pool = 0,
+ .default_pool = 0,
+ .nb_pool_maps = 0,
+ .pool_map = {{0, 0},},
+ .dcb_tc = {0},
+ },
+ .dcb_rx_conf = {
+ .nb_tcs = ETH_4_TCS,
+ /** Traffic class each UP mapped to. */
+ .dcb_tc = {0},
+ },
+ .vmdq_rx_conf = {
+ .nb_queue_pools = ETH_32_POOLS,
+ .enable_default_pool = 0,
+ .default_pool = 0,
+ .nb_pool_maps = 0,
+ .pool_map = {{0, 0},},
+ },
+ },
+ .tx_adv_conf = {
+ .vmdq_dcb_tx_conf = {
+ .nb_queue_pools = ETH_32_POOLS,
+ .dcb_tc = {0},
+ },
+ },
+};
+
+/* array used for printing out statistics */
+volatile unsigned long rxPackets[MAX_QUEUES] = {0};
+
+const uint16_t vlan_tags[] = {
+ 0, 1, 2, 3, 4, 5, 6, 7,
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31
+};
+
+const uint16_t num_vlans = RTE_DIM(vlan_tags);
+/* pool mac addr template, pool mac addr is like: 52 54 00 12 port# pool# */
+static struct ether_addr pool_addr_template = {
+ .addr_bytes = {0x52, 0x54, 0x00, 0x12, 0x00, 0x00}
+};
+
+/* ethernet addresses of ports */
+static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
+
+/* Builds up the correct configuration for vmdq+dcb based on the vlan tags array
+ * given above, and the number of traffic classes available for use. */
+static inline int
+get_eth_conf(struct rte_eth_conf *eth_conf)
+{
+ struct rte_eth_vmdq_dcb_conf conf;
+ struct rte_eth_vmdq_rx_conf vmdq_conf;
+ struct rte_eth_dcb_rx_conf dcb_conf;
+ struct rte_eth_vmdq_dcb_tx_conf tx_conf;
+ uint8_t i;
+
+ conf.nb_queue_pools = (enum rte_eth_nb_pools)num_pools;
+ vmdq_conf.nb_queue_pools = (enum rte_eth_nb_pools)num_pools;
+ tx_conf.nb_queue_pools = (enum rte_eth_nb_pools)num_pools;
+ conf.nb_pool_maps = num_pools;
+ vmdq_conf.nb_pool_maps = num_pools;
+ conf.enable_default_pool = 0;
+ vmdq_conf.enable_default_pool = 0;
+ conf.default_pool = 0; /* set explicit value, even if not used */
+ vmdq_conf.default_pool = 0;
+
+ for (i = 0; i < conf.nb_pool_maps; i++) {
+ conf.pool_map[i].vlan_id = vlan_tags[i];
+ vmdq_conf.pool_map[i].vlan_id = vlan_tags[i];
+ conf.pool_map[i].pools = 1UL << i;
+ vmdq_conf.pool_map[i].pools = 1UL << i;
+ }
+ for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++){
+ conf.dcb_tc[i] = i % num_tcs;
+ dcb_conf.dcb_tc[i] = i % num_tcs;
+ tx_conf.dcb_tc[i] = i % num_tcs;
+ }
+ dcb_conf.nb_tcs = (enum rte_eth_nb_tcs)num_tcs;
+ (void)(rte_memcpy(eth_conf, &vmdq_dcb_conf_default, sizeof(*eth_conf)));
+ (void)(rte_memcpy(&eth_conf->rx_adv_conf.vmdq_dcb_conf, &conf,
+ sizeof(conf)));
+ (void)(rte_memcpy(&eth_conf->rx_adv_conf.dcb_rx_conf, &dcb_conf,
+ sizeof(dcb_conf)));
+ (void)(rte_memcpy(&eth_conf->rx_adv_conf.vmdq_rx_conf, &vmdq_conf,
+ sizeof(vmdq_conf)));
+ (void)(rte_memcpy(&eth_conf->tx_adv_conf.vmdq_dcb_tx_conf, &tx_conf,
+ sizeof(tx_conf)));
+ if (rss_enable) {
+ eth_conf->rxmode.mq_mode = ETH_MQ_RX_VMDQ_DCB_RSS;
+ eth_conf->rx_adv_conf.rss_conf.rss_hf = ETH_RSS_IP |
+ ETH_RSS_UDP |
+ ETH_RSS_TCP |
+ ETH_RSS_SCTP;
+ }
+ return 0;
+}
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+static inline int
+port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_conf port_conf = {0};
+ const uint16_t rxRingSize = RTE_TEST_RX_DESC_DEFAULT;
+ const uint16_t txRingSize = RTE_TEST_TX_DESC_DEFAULT;
+ int retval;
+ uint16_t q;
+ uint16_t queues_per_pool;
+ uint32_t max_nb_pools;
+
+ /*
+ * The max pool number from dev_info will be used to validate the pool
+ * number specified in cmd line
+ */
+ rte_eth_dev_info_get(port, &dev_info);
+ max_nb_pools = (uint32_t)dev_info.max_vmdq_pools;
+ /*
+ * We allow to process part of VMDQ pools specified by num_pools in
+ * command line.
+ */
+ if (num_pools > max_nb_pools) {
+ printf("num_pools %d >max_nb_pools %d\n",
+ num_pools, max_nb_pools);
+ return -1;
+ }
+
+ /*
+ * NIC queues are divided into pf queues and vmdq queues.
+ * There is assumption here all ports have the same configuration!
+ */
+ vmdq_queue_base = dev_info.vmdq_queue_base;
+ vmdq_pool_base = dev_info.vmdq_pool_base;
+ printf("vmdq queue base: %d pool base %d\n",
+ vmdq_queue_base, vmdq_pool_base);
+ if (vmdq_pool_base == 0) {
+ num_vmdq_queues = dev_info.max_rx_queues;
+ num_queues = dev_info.max_rx_queues;
+ if (num_tcs != num_vmdq_queues / num_pools) {
+ printf("nb_tcs %d is invalid considering with"
+ " nb_pools %d, nb_tcs * nb_pools should = %d\n",
+ num_tcs, num_pools, num_vmdq_queues);
+ return -1;
+ }
+ } else {
+ queues_per_pool = dev_info.vmdq_queue_num /
+ dev_info.max_vmdq_pools;
+ if (num_tcs > queues_per_pool) {
+ printf("num_tcs %d > num of queues per pool %d\n",
+ num_tcs, queues_per_pool);
+ return -1;
+ }
+ num_vmdq_queues = num_pools * queues_per_pool;
+ num_queues = vmdq_queue_base + num_vmdq_queues;
+ printf("Configured vmdq pool num: %u,"
+ " each vmdq pool has %u queues\n",
+ num_pools, queues_per_pool);
+ }
+
+ if (port >= rte_eth_dev_count())
+ return -1;
+
+ retval = get_eth_conf(&port_conf);
+ if (retval < 0)
+ return retval;
+
+ /*
+ * Though in this example, all queues including pf queues are setup.
+ * This is because VMDQ queues doesn't always start from zero, and the
+ * PMD layer doesn't support selectively initialising part of rx/tx
+ * queues.
+ */
+ retval = rte_eth_dev_configure(port, num_queues, num_queues, &port_conf);
+ if (retval != 0)
+ return retval;
+
+ for (q = 0; q < num_queues; q++) {
+ retval = rte_eth_rx_queue_setup(port, q, rxRingSize,
+ rte_eth_dev_socket_id(port),
+ NULL,
+ mbuf_pool);
+ if (retval < 0) {
+ printf("initialize rx queue %d failed\n", q);
+ return retval;
+ }
+ }
+
+ for (q = 0; q < num_queues; q++) {
+ retval = rte_eth_tx_queue_setup(port, q, txRingSize,
+ rte_eth_dev_socket_id(port),
+ NULL);
+ if (retval < 0) {
+ printf("initialize tx queue %d failed\n", q);
+ return retval;
+ }
+ }
+
+ retval = rte_eth_dev_start(port);
+ if (retval < 0) {
+ printf("port %d start failed\n", port);
+ return retval;
+ }
+
+ rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+ printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+ " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+ (unsigned)port,
+ vmdq_ports_eth_addr[port].addr_bytes[0],
+ vmdq_ports_eth_addr[port].addr_bytes[1],
+ vmdq_ports_eth_addr[port].addr_bytes[2],
+ vmdq_ports_eth_addr[port].addr_bytes[3],
+ vmdq_ports_eth_addr[port].addr_bytes[4],
+ vmdq_ports_eth_addr[port].addr_bytes[5]);
+
+ /* Set mac for each pool.*/
+ for (q = 0; q < num_pools; q++) {
+ struct ether_addr mac;
+
+ mac = pool_addr_template;
+ mac.addr_bytes[4] = port;
+ mac.addr_bytes[5] = q;
+ printf("Port %u vmdq pool %u set mac %02x:%02x:%02x:%02x:%02x:%02x\n",
+ port, q,
+ mac.addr_bytes[0], mac.addr_bytes[1],
+ mac.addr_bytes[2], mac.addr_bytes[3],
+ mac.addr_bytes[4], mac.addr_bytes[5]);
+ retval = rte_eth_dev_mac_addr_add(port, &mac,
+ q + vmdq_pool_base);
+ if (retval) {
+ printf("mac addr add failed at pool %d\n", q);
+ return retval;
+ }
+ }
+
+ return 0;
+}
+
+/* Check num_pools parameter and set it if OK*/
+static int
+vmdq_parse_num_pools(const char *q_arg)
+{
+ char *end = NULL;
+ int n;
+
+ /* parse number string */
+ n = strtol(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+ if (n != 16 && n != 32)
+ return -1;
+ if (n == 16)
+ num_pools = ETH_16_POOLS;
+ else
+ num_pools = ETH_32_POOLS;
+
+ return 0;
+}
+
+/* Check num_tcs parameter and set it if OK*/
+static int
+vmdq_parse_num_tcs(const char *q_arg)
+{
+ char *end = NULL;
+ int n;
+
+ /* parse number string */
+ n = strtol(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+
+ if (n != 4 && n != 8)
+ return -1;
+ if (n == 4)
+ num_tcs = ETH_4_TCS;
+ else
+ num_tcs = ETH_8_TCS;
+
+ return 0;
+}
+
+static int
+parse_portmask(const char *portmask)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ /* parse hexadecimal string */
+ pm = strtoul(portmask, &end, 16);
+ if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+
+ if (pm == 0)
+ return -1;
+
+ return pm;
+}
+
+/* Display usage */
+static void
+vmdq_usage(const char *prgname)
+{
+ printf("%s [EAL options] -- -p PORTMASK]\n"
+ " --nb-pools NP: number of pools (32 default, 16)\n"
+ " --nb-tcs NP: number of TCs (4 default, 8)\n"
+ " --enable-rss: enable RSS (disabled by default)\n",
+ prgname);
+}
+
+/* Parse the argument (num_pools) given in the command line of the application */
+static int
+vmdq_parse_args(int argc, char **argv)
+{
+ int opt;
+ int option_index;
+ unsigned i;
+ const char *prgname = argv[0];
+ static struct option long_option[] = {
+ {"nb-pools", required_argument, NULL, 0},
+ {"nb-tcs", required_argument, NULL, 0},
+ {"enable-rss", 0, NULL, 0},
+ {NULL, 0, 0, 0}
+ };
+
+ /* Parse command line */
+ while ((opt = getopt_long(argc, argv, "p:", long_option,
+ &option_index)) != EOF) {
+ switch (opt) {
+ /* portmask */
+ case 'p':
+ enabled_port_mask = parse_portmask(optarg);
+ if (enabled_port_mask == 0) {
+ printf("invalid portmask\n");
+ vmdq_usage(prgname);
+ return -1;
+ }
+ break;
+ case 0:
+ if (!strcmp(long_option[option_index].name, "nb-pools")) {
+ if (vmdq_parse_num_pools(optarg) == -1) {
+ printf("invalid number of pools\n");
+ return -1;
+ }
+ }
+
+ if (!strcmp(long_option[option_index].name, "nb-tcs")) {
+ if (vmdq_parse_num_tcs(optarg) == -1) {
+ printf("invalid number of tcs\n");
+ return -1;
+ }
+ }
+
+ if (!strcmp(long_option[option_index].name, "enable-rss"))
+ rss_enable = 1;
+ break;
+
+ default:
+ vmdq_usage(prgname);
+ return -1;
+ }
+ }
+
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+ if (enabled_port_mask & (1 << i))
+ ports[num_ports++] = (uint8_t)i;
+ }
+
+ if (num_ports < 2 || num_ports % 2) {
+ printf("Current enabled port number is %u,"
+ " but it should be even and at least 2\n", num_ports);
+ return -1;
+ }
+
+ return 0;
+}
+
+static void
+update_mac_address(struct rte_mbuf *m, unsigned dst_port)
+{
+ struct ether_hdr *eth;
+ void *tmp;
+
+ eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+ /* 02:00:00:00:00:xx */
+ tmp = &eth->d_addr.addr_bytes[0];
+ *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
+
+ /* src addr */
+ ether_addr_copy(&vmdq_ports_eth_addr[dst_port], &eth->s_addr);
+}
+
+/* When we receive a HUP signal, print out our stats */
+static void
+sighup_handler(int signum)
+{
+ unsigned q = vmdq_queue_base;
+
+ for (; q < num_queues; q++) {
+ if (q % (num_vmdq_queues / num_pools) == 0)
+ printf("\nPool %u: ", (q - vmdq_queue_base) /
+ (num_vmdq_queues / num_pools));
+ printf("%lu ", rxPackets[q]);
+ }
+ printf("\nFinished handling signal %d\n", signum);
+}
+
+/*
+ * Main thread that does the work, reading from INPUT_PORT
+ * and writing to OUTPUT_PORT
+ */
+static int
+lcore_main(void *arg)
+{
+ const uintptr_t core_num = (uintptr_t)arg;
+ const unsigned num_cores = rte_lcore_count();
+ uint16_t startQueue, endQueue;
+ uint16_t q, i, p;
+ const uint16_t quot = (uint16_t)(num_vmdq_queues / num_cores);
+ const uint16_t remainder = (uint16_t)(num_vmdq_queues % num_cores);
+
+
+ if (remainder) {
+ if (core_num < remainder) {
+ startQueue = (uint16_t)(core_num * (quot + 1));
+ endQueue = (uint16_t)(startQueue + quot + 1);
+ } else {
+ startQueue = (uint16_t)(core_num * quot + remainder);
+ endQueue = (uint16_t)(startQueue + quot);
+ }
+ } else {
+ startQueue = (uint16_t)(core_num * quot);
+ endQueue = (uint16_t)(startQueue + quot);
+ }
+
+ /* vmdq queue idx doesn't always start from zero.*/
+ startQueue += vmdq_queue_base;
+ endQueue += vmdq_queue_base;
+ printf("Core %u(lcore %u) reading queues %i-%i\n", (unsigned)core_num,
+ rte_lcore_id(), startQueue, endQueue - 1);
+
+ if (startQueue == endQueue) {
+ printf("lcore %u has nothing to do\n", (unsigned)core_num);
+ return 0;
+ }
+
+ for (;;) {
+ struct rte_mbuf *buf[MAX_PKT_BURST];
+ const uint16_t buf_size = sizeof(buf) / sizeof(buf[0]);
+ for (p = 0; p < num_ports; p++) {
+ const uint8_t src = ports[p];
+ const uint8_t dst = ports[p ^ 1]; /* 0 <-> 1, 2 <-> 3 etc */
+
+ if ((src == INVALID_PORT_ID) || (dst == INVALID_PORT_ID))
+ continue;
+
+ for (q = startQueue; q < endQueue; q++) {
+ const uint16_t rxCount = rte_eth_rx_burst(src,
+ q, buf, buf_size);
+
+ if (unlikely(rxCount == 0))
+ continue;
+
+ rxPackets[q] += rxCount;
+
+ for (i = 0; i < rxCount; i++)
+ update_mac_address(buf[i], dst);
+
+ const uint16_t txCount = rte_eth_tx_burst(dst,
+ q, buf, rxCount);
+ if (txCount != rxCount) {
+ for (i = txCount; i < rxCount; i++)
+ rte_pktmbuf_free(buf[i]);
+ }
+ }
+ }
+ }
+}
+
+/*
+ * Update the global var NUM_PORTS and array PORTS according to system ports number
+ * and return valid ports number
+ */
+static unsigned check_ports_num(unsigned nb_ports)
+{
+ unsigned valid_num_ports = num_ports;
+ unsigned portid;
+
+ if (num_ports > nb_ports) {
+ printf("\nSpecified port number(%u) exceeds total system port number(%u)\n",
+ num_ports, nb_ports);
+ num_ports = nb_ports;
+ }
+
+ for (portid = 0; portid < num_ports; portid++) {
+ if (ports[portid] >= nb_ports) {
+ printf("\nSpecified port ID(%u) exceeds max system port ID(%u)\n",
+ ports[portid], (nb_ports - 1));
+ ports[portid] = INVALID_PORT_ID;
+ valid_num_ports--;
+ }
+ }
+ return valid_num_ports;
+}
+
+
+/* Main function, does initialisation and calls the per-lcore functions */
+int
+main(int argc, char *argv[])
+{
+ unsigned cores;
+ struct rte_mempool *mbuf_pool;
+ unsigned lcore_id;
+ uintptr_t i;
+ int ret;
+ unsigned nb_ports, valid_num_ports;
+ uint8_t portid;
+
+ signal(SIGHUP, sighup_handler);
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+ argc -= ret;
+ argv += ret;
+
+ /* parse app arguments */
+ ret = vmdq_parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid VMDQ argument\n");
+
+ cores = rte_lcore_count();
+ if ((cores & (cores - 1)) != 0 || cores > RTE_MAX_LCORE) {
+ rte_exit(EXIT_FAILURE,"This program can only run on an even"
+ " number of cores(1-%d)\n\n", RTE_MAX_LCORE);
+ }
+
+ nb_ports = rte_eth_dev_count();
+ if (nb_ports > RTE_MAX_ETHPORTS)
+ nb_ports = RTE_MAX_ETHPORTS;
+
+ /*
+ * Update the global var NUM_PORTS and global array PORTS
+ * and get value of var VALID_NUM_PORTS according to system ports number
+ */
+ valid_num_ports = check_ports_num(nb_ports);
+
+ if (valid_num_ports < 2 || valid_num_ports % 2) {
+ printf("Current valid ports number is %u\n", valid_num_ports);
+ rte_exit(EXIT_FAILURE, "Error with valid ports number is not even or less than 2\n");
+ }
+
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL",
+ NUM_MBUFS_PER_PORT * nb_ports, MBUF_CACHE_SIZE,
+ 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
+ if (mbuf_pool == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+ /* initialize all ports */
+ for (portid = 0; portid < nb_ports; portid++) {
+ /* skip ports that are not enabled */
+ if ((enabled_port_mask & (1 << portid)) == 0) {
+ printf("\nSkipping disabled port %d\n", portid);
+ continue;
+ }
+ if (port_init(portid, mbuf_pool) != 0)
+ rte_exit(EXIT_FAILURE, "Cannot initialize network ports\n");
+ }
+
+ /* call lcore_main() on every slave lcore */
+ i = 0;
+ RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ rte_eal_remote_launch(lcore_main, (void*)i++, lcore_id);
+ }
+ /* call on master too */
+ (void) lcore_main((void*)i);
+
+ return 0;
+}