diff options
Diffstat (limited to 'kernel/linux/kni/ethtool/igb')
28 files changed, 36773 insertions, 0 deletions
diff --git a/kernel/linux/kni/ethtool/igb/e1000_82575.c b/kernel/linux/kni/ethtool/igb/e1000_82575.c new file mode 100644 index 00000000..98346709 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_82575.c @@ -0,0 +1,3650 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* + * 82575EB Gigabit Network Connection + * 82575EB Gigabit Backplane Connection + * 82575GB Gigabit Network Connection + * 82576 Gigabit Network Connection + * 82576 Quad Port Gigabit Mezzanine Adapter + * 82580 Gigabit Network Connection + * I350 Gigabit Network Connection + */ + +#include "e1000_api.h" +#include "e1000_i210.h" + +static s32 e1000_init_phy_params_82575(struct e1000_hw *hw); +static s32 e1000_init_mac_params_82575(struct e1000_hw *hw); +static s32 e1000_acquire_phy_82575(struct e1000_hw *hw); +static void e1000_release_phy_82575(struct e1000_hw *hw); +static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw); +static void e1000_release_nvm_82575(struct e1000_hw *hw); +static s32 e1000_check_for_link_82575(struct e1000_hw *hw); +static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw); +static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw); +static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +static s32 e1000_init_hw_82575(struct e1000_hw *hw); +static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw); +static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, + u16 *data); +static s32 e1000_reset_hw_82575(struct e1000_hw *hw); +static s32 e1000_reset_hw_82580(struct e1000_hw *hw); +static s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, + u32 offset, u16 *data); +static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, + u32 offset, u16 data); +static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, + bool active); +static s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, + bool active); +static s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, + bool active); +static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw); +static s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw); +static s32 e1000_get_media_type_82575(struct e1000_hw *hw); +static s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw); +static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data); +static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, + u32 offset, u16 data); +static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw); +static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask); +static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, + u16 *speed, u16 *duplex); +static s32 e1000_get_phy_id_82575(struct e1000_hw *hw); +static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask); +static bool e1000_sgmii_active_82575(struct e1000_hw *hw); +static s32 e1000_reset_init_script_82575(struct e1000_hw *hw); +static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw); +static void e1000_config_collision_dist_82575(struct e1000_hw *hw); +static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw); +static void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw); +static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw); +static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw); +static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw); +static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw); +static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw); +static s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, + u16 offset); +static s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, + u16 offset); +static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw); +static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw); +static void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value); +static void e1000_clear_vfta_i350(struct e1000_hw *hw); + +static void e1000_i2c_start(struct e1000_hw *hw); +static void e1000_i2c_stop(struct e1000_hw *hw); +static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data); +static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data); +static s32 e1000_get_i2c_ack(struct e1000_hw *hw); +static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data); +static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data); +static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl); +static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl); +static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data); +static bool e1000_get_i2c_data(u32 *i2cctl); + +static const u16 e1000_82580_rxpbs_table[] = { + 36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 }; +#define E1000_82580_RXPBS_TABLE_SIZE \ + (sizeof(e1000_82580_rxpbs_table)/sizeof(u16)) + + +/** + * e1000_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO + * @hw: pointer to the HW structure + * + * Called to determine if the I2C pins are being used for I2C or as an + * external MDIO interface since the two options are mutually exclusive. + **/ +static bool e1000_sgmii_uses_mdio_82575(struct e1000_hw *hw) +{ + u32 reg = 0; + bool ext_mdio = false; + + DEBUGFUNC("e1000_sgmii_uses_mdio_82575"); + + switch (hw->mac.type) { + case e1000_82575: + case e1000_82576: + reg = E1000_READ_REG(hw, E1000_MDIC); + ext_mdio = !!(reg & E1000_MDIC_DEST); + break; + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + reg = E1000_READ_REG(hw, E1000_MDICNFG); + ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO); + break; + default: + break; + } + return ext_mdio; +} + +/** + * e1000_init_phy_params_82575 - Init PHY func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 e1000_init_phy_params_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u32 ctrl_ext; + + DEBUGFUNC("e1000_init_phy_params_82575"); + + phy->ops.read_i2c_byte = e1000_read_i2c_byte_generic; + phy->ops.write_i2c_byte = e1000_write_i2c_byte_generic; + + if (hw->phy.media_type != e1000_media_type_copper) { + phy->type = e1000_phy_none; + goto out; + } + + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_82575; + + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; + + phy->ops.acquire = e1000_acquire_phy_82575; + phy->ops.check_reset_block = e1000_check_reset_block_generic; + phy->ops.commit = e1000_phy_sw_reset_generic; + phy->ops.get_cfg_done = e1000_get_cfg_done_82575; + phy->ops.release = e1000_release_phy_82575; + + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + + if (e1000_sgmii_active_82575(hw)) { + phy->ops.reset = e1000_phy_hw_reset_sgmii_82575; + ctrl_ext |= E1000_CTRL_I2C_ENA; + } else { + phy->ops.reset = e1000_phy_hw_reset_generic; + ctrl_ext &= ~E1000_CTRL_I2C_ENA; + } + + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + e1000_reset_mdicnfg_82580(hw); + + if (e1000_sgmii_active_82575(hw) && !e1000_sgmii_uses_mdio_82575(hw)) { + phy->ops.read_reg = e1000_read_phy_reg_sgmii_82575; + phy->ops.write_reg = e1000_write_phy_reg_sgmii_82575; + } else { + switch (hw->mac.type) { + case e1000_82580: + case e1000_i350: + case e1000_i354: + phy->ops.read_reg = e1000_read_phy_reg_82580; + phy->ops.write_reg = e1000_write_phy_reg_82580; + break; + case e1000_i210: + case e1000_i211: + phy->ops.read_reg = e1000_read_phy_reg_gs40g; + phy->ops.write_reg = e1000_write_phy_reg_gs40g; + break; + default: + phy->ops.read_reg = e1000_read_phy_reg_igp; + phy->ops.write_reg = e1000_write_phy_reg_igp; + } + } + + /* Set phy->phy_addr and phy->id. */ + ret_val = e1000_get_phy_id_82575(hw); + + /* Verify phy id and set remaining function pointers */ + switch (phy->id) { + case M88E1543_E_PHY_ID: + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case M88E1111_I_PHY_ID: + phy->type = e1000_phy_m88; + phy->ops.check_polarity = e1000_check_polarity_m88; + phy->ops.get_info = e1000_get_phy_info_m88; + if (phy->id == I347AT4_E_PHY_ID || + phy->id == M88E1112_E_PHY_ID || + phy->id == M88E1340M_E_PHY_ID) + phy->ops.get_cable_length = + e1000_get_cable_length_m88_gen2; + else if (phy->id == M88E1543_E_PHY_ID) + phy->ops.get_cable_length = + e1000_get_cable_length_m88_gen2; + else + phy->ops.get_cable_length = e1000_get_cable_length_m88; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; + /* Check if this PHY is configured for media swap. */ + if (phy->id == M88E1112_E_PHY_ID) { + u16 data; + + ret_val = phy->ops.write_reg(hw, + E1000_M88E1112_PAGE_ADDR, + 2); + if (ret_val) + goto out; + + ret_val = phy->ops.read_reg(hw, + E1000_M88E1112_MAC_CTRL_1, + &data); + if (ret_val) + goto out; + + data = (data & E1000_M88E1112_MAC_CTRL_1_MODE_MASK) >> + E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT; + if (data == E1000_M88E1112_AUTO_COPPER_SGMII || + data == E1000_M88E1112_AUTO_COPPER_BASEX) + hw->mac.ops.check_for_link = + e1000_check_for_link_media_swap; + } + break; + case IGP03E1000_E_PHY_ID: + case IGP04E1000_E_PHY_ID: + phy->type = e1000_phy_igp_3; + phy->ops.check_polarity = e1000_check_polarity_igp; + phy->ops.get_info = e1000_get_phy_info_igp; + phy->ops.get_cable_length = e1000_get_cable_length_igp_2; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82575; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_generic; + break; + case I82580_I_PHY_ID: + case I350_I_PHY_ID: + phy->type = e1000_phy_82580; + phy->ops.check_polarity = e1000_check_polarity_82577; + phy->ops.force_speed_duplex = + e1000_phy_force_speed_duplex_82577; + phy->ops.get_cable_length = e1000_get_cable_length_82577; + phy->ops.get_info = e1000_get_phy_info_82577; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; + break; + case I210_I_PHY_ID: + phy->type = e1000_phy_i210; + phy->ops.check_polarity = e1000_check_polarity_m88; + phy->ops.get_info = e1000_get_phy_info_m88; + phy->ops.get_cable_length = e1000_get_cable_length_m88_gen2; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; + break; + default: + ret_val = -E1000_ERR_PHY; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_init_nvm_params_82575 - Init NVM func ptrs. + * @hw: pointer to the HW structure + **/ +s32 e1000_init_nvm_params_82575(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + u16 size; + + DEBUGFUNC("e1000_init_nvm_params_82575"); + + size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> + E1000_EECD_SIZE_EX_SHIFT); + /* + * Added to a constant, "size" becomes the left-shift value + * for setting word_size. + */ + size += NVM_WORD_SIZE_BASE_SHIFT; + + /* Just in case size is out of range, cap it to the largest + * EEPROM size supported + */ + if (size > 15) + size = 15; + + nvm->word_size = 1 << size; + if (hw->mac.type < e1000_i210) { + nvm->opcode_bits = 8; + nvm->delay_usec = 1; + + switch (nvm->override) { + case e1000_nvm_override_spi_large: + nvm->page_size = 32; + nvm->address_bits = 16; + break; + case e1000_nvm_override_spi_small: + nvm->page_size = 8; + nvm->address_bits = 8; + break; + default: + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? + 16 : 8; + break; + } + if (nvm->word_size == (1 << 15)) + nvm->page_size = 128; + + nvm->type = e1000_nvm_eeprom_spi; + } else { + nvm->type = e1000_nvm_flash_hw; + } + + /* Function Pointers */ + nvm->ops.acquire = e1000_acquire_nvm_82575; + nvm->ops.release = e1000_release_nvm_82575; + if (nvm->word_size < (1 << 15)) + nvm->ops.read = e1000_read_nvm_eerd; + else + nvm->ops.read = e1000_read_nvm_spi; + + nvm->ops.write = e1000_write_nvm_spi; + nvm->ops.validate = e1000_validate_nvm_checksum_generic; + nvm->ops.update = e1000_update_nvm_checksum_generic; + nvm->ops.valid_led_default = e1000_valid_led_default_82575; + + /* override generic family function pointers for specific descendants */ + switch (hw->mac.type) { + case e1000_82580: + nvm->ops.validate = e1000_validate_nvm_checksum_82580; + nvm->ops.update = e1000_update_nvm_checksum_82580; + break; + case e1000_i350: + //case e1000_i354: + nvm->ops.validate = e1000_validate_nvm_checksum_i350; + nvm->ops.update = e1000_update_nvm_checksum_i350; + break; + default: + break; + } + + return E1000_SUCCESS; +} + +/** + * e1000_init_mac_params_82575 - Init MAC func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 e1000_init_mac_params_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + + DEBUGFUNC("e1000_init_mac_params_82575"); + + /* Derives media type */ + e1000_get_media_type_82575(hw); + /* Set mta register count */ + mac->mta_reg_count = 128; + /* Set uta register count */ + mac->uta_reg_count = (hw->mac.type == e1000_82575) ? 0 : 128; + /* Set rar entry count */ + mac->rar_entry_count = E1000_RAR_ENTRIES_82575; + if (mac->type == e1000_82576) + mac->rar_entry_count = E1000_RAR_ENTRIES_82576; + if (mac->type == e1000_82580) + mac->rar_entry_count = E1000_RAR_ENTRIES_82580; + if (mac->type == e1000_i350 || mac->type == e1000_i354) + mac->rar_entry_count = E1000_RAR_ENTRIES_I350; + + /* Enable EEE default settings for EEE supported devices */ + if (mac->type >= e1000_i350) + dev_spec->eee_disable = false; + + /* Allow a single clear of the SW semaphore on I210 and newer */ + if (mac->type >= e1000_i210) + dev_spec->clear_semaphore_once = true; + + /* Set if part includes ASF firmware */ + mac->asf_firmware_present = true; + /* FWSM register */ + mac->has_fwsm = true; + /* ARC supported; valid only if manageability features are enabled. */ + mac->arc_subsystem_valid = + !!(E1000_READ_REG(hw, E1000_FWSM) & E1000_FWSM_MODE_MASK); + + /* Function pointers */ + + /* bus type/speed/width */ + mac->ops.get_bus_info = e1000_get_bus_info_pcie_generic; + /* reset */ + if (mac->type >= e1000_82580) + mac->ops.reset_hw = e1000_reset_hw_82580; + else + mac->ops.reset_hw = e1000_reset_hw_82575; + /* hw initialization */ + mac->ops.init_hw = e1000_init_hw_82575; + /* link setup */ + mac->ops.setup_link = e1000_setup_link_generic; + /* physical interface link setup */ + mac->ops.setup_physical_interface = + (hw->phy.media_type == e1000_media_type_copper) + ? e1000_setup_copper_link_82575 : e1000_setup_serdes_link_82575; + /* physical interface shutdown */ + mac->ops.shutdown_serdes = e1000_shutdown_serdes_link_82575; + /* physical interface power up */ + mac->ops.power_up_serdes = e1000_power_up_serdes_link_82575; + /* check for link */ + mac->ops.check_for_link = e1000_check_for_link_82575; + /* read mac address */ + mac->ops.read_mac_addr = e1000_read_mac_addr_82575; + /* configure collision distance */ + mac->ops.config_collision_dist = e1000_config_collision_dist_82575; + /* multicast address update */ + mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic; + if (hw->mac.type == e1000_i350 || mac->type == e1000_i354) { + /* writing VFTA */ + mac->ops.write_vfta = e1000_write_vfta_i350; + /* clearing VFTA */ + mac->ops.clear_vfta = e1000_clear_vfta_i350; + } else { + /* writing VFTA */ + mac->ops.write_vfta = e1000_write_vfta_generic; + /* clearing VFTA */ + mac->ops.clear_vfta = e1000_clear_vfta_generic; + } + if (hw->mac.type >= e1000_82580) + mac->ops.validate_mdi_setting = + e1000_validate_mdi_setting_crossover_generic; + /* ID LED init */ + mac->ops.id_led_init = e1000_id_led_init_generic; + /* blink LED */ + mac->ops.blink_led = e1000_blink_led_generic; + /* setup LED */ + mac->ops.setup_led = e1000_setup_led_generic; + /* cleanup LED */ + mac->ops.cleanup_led = e1000_cleanup_led_generic; + /* turn on/off LED */ + mac->ops.led_on = e1000_led_on_generic; + mac->ops.led_off = e1000_led_off_generic; + /* clear hardware counters */ + mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82575; + /* link info */ + mac->ops.get_link_up_info = e1000_get_link_up_info_82575; + /* get thermal sensor data */ + mac->ops.get_thermal_sensor_data = + e1000_get_thermal_sensor_data_generic; + mac->ops.init_thermal_sensor_thresh = + e1000_init_thermal_sensor_thresh_generic; + /* acquire SW_FW sync */ + mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_82575; + mac->ops.release_swfw_sync = e1000_release_swfw_sync_82575; + if (mac->type >= e1000_i210) { + mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_i210; + mac->ops.release_swfw_sync = e1000_release_swfw_sync_i210; + } + + /* set lan id for port to determine which phy lock to use */ + hw->mac.ops.set_lan_id(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_init_function_pointers_82575 - Init func ptrs. + * @hw: pointer to the HW structure + * + * Called to initialize all function pointers and parameters. + **/ +void e1000_init_function_pointers_82575(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_init_function_pointers_82575"); + + hw->mac.ops.init_params = e1000_init_mac_params_82575; + hw->nvm.ops.init_params = e1000_init_nvm_params_82575; + hw->phy.ops.init_params = e1000_init_phy_params_82575; + hw->mbx.ops.init_params = e1000_init_mbx_params_pf; +} + +/** + * e1000_acquire_phy_82575 - Acquire rights to access PHY + * @hw: pointer to the HW structure + * + * Acquire access rights to the correct PHY. + **/ +static s32 e1000_acquire_phy_82575(struct e1000_hw *hw) +{ + u16 mask = E1000_SWFW_PHY0_SM; + + DEBUGFUNC("e1000_acquire_phy_82575"); + + if (hw->bus.func == E1000_FUNC_1) + mask = E1000_SWFW_PHY1_SM; + else if (hw->bus.func == E1000_FUNC_2) + mask = E1000_SWFW_PHY2_SM; + else if (hw->bus.func == E1000_FUNC_3) + mask = E1000_SWFW_PHY3_SM; + + return hw->mac.ops.acquire_swfw_sync(hw, mask); +} + +/** + * e1000_release_phy_82575 - Release rights to access PHY + * @hw: pointer to the HW structure + * + * A wrapper to release access rights to the correct PHY. + **/ +static void e1000_release_phy_82575(struct e1000_hw *hw) +{ + u16 mask = E1000_SWFW_PHY0_SM; + + DEBUGFUNC("e1000_release_phy_82575"); + + if (hw->bus.func == E1000_FUNC_1) + mask = E1000_SWFW_PHY1_SM; + else if (hw->bus.func == E1000_FUNC_2) + mask = E1000_SWFW_PHY2_SM; + else if (hw->bus.func == E1000_FUNC_3) + mask = E1000_SWFW_PHY3_SM; + + hw->mac.ops.release_swfw_sync(hw, mask); +} + +/** + * e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the serial gigabit media independent + * interface and stores the retrieved information in data. + **/ +static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, + u16 *data) +{ + s32 ret_val = -E1000_ERR_PARAM; + + DEBUGFUNC("e1000_read_phy_reg_sgmii_82575"); + + if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { + DEBUGOUT1("PHY Address %u is out of range\n", offset); + goto out; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + ret_val = e1000_read_phy_reg_i2c(hw, offset, data); + + hw->phy.ops.release(hw); + +out: + return ret_val; +} + +/** + * e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset using the serial gigabit + * media independent interface. + **/ +static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, + u16 data) +{ + s32 ret_val = -E1000_ERR_PARAM; + + DEBUGFUNC("e1000_write_phy_reg_sgmii_82575"); + + if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { + DEBUGOUT1("PHY Address %d is out of range\n", offset); + goto out; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + ret_val = e1000_write_phy_reg_i2c(hw, offset, data); + + hw->phy.ops.release(hw); + +out: + return ret_val; +} + +/** + * e1000_get_phy_id_82575 - Retrieve PHY addr and id + * @hw: pointer to the HW structure + * + * Retrieves the PHY address and ID for both PHY's which do and do not use + * sgmi interface. + **/ +static s32 e1000_get_phy_id_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 phy_id; + u32 ctrl_ext; + u32 mdic; + + DEBUGFUNC("e1000_get_phy_id_82575"); + + /* i354 devices can have a PHY that needs an extra read for id */ + if (hw->mac.type == e1000_i354) + e1000_get_phy_id(hw); + + + /* + * For SGMII PHYs, we try the list of possible addresses until + * we find one that works. For non-SGMII PHYs + * (e.g. integrated copper PHYs), an address of 1 should + * work. The result of this function should mean phy->phy_addr + * and phy->id are set correctly. + */ + if (!e1000_sgmii_active_82575(hw)) { + phy->addr = 1; + ret_val = e1000_get_phy_id(hw); + goto out; + } + + if (e1000_sgmii_uses_mdio_82575(hw)) { + switch (hw->mac.type) { + case e1000_82575: + case e1000_82576: + mdic = E1000_READ_REG(hw, E1000_MDIC); + mdic &= E1000_MDIC_PHY_MASK; + phy->addr = mdic >> E1000_MDIC_PHY_SHIFT; + break; + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + mdic = E1000_READ_REG(hw, E1000_MDICNFG); + mdic &= E1000_MDICNFG_PHY_MASK; + phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT; + break; + default: + ret_val = -E1000_ERR_PHY; + goto out; + break; + } + ret_val = e1000_get_phy_id(hw); + goto out; + } + + /* Power on sgmii phy if it is disabled */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + E1000_WRITE_REG(hw, E1000_CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA); + E1000_WRITE_FLUSH(hw); + msec_delay(300); + + /* + * The address field in the I2CCMD register is 3 bits and 0 is invalid. + * Therefore, we need to test 1-7 + */ + for (phy->addr = 1; phy->addr < 8; phy->addr++) { + ret_val = e1000_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id); + if (ret_val == E1000_SUCCESS) { + DEBUGOUT2("Vendor ID 0x%08X read at address %u\n", + phy_id, phy->addr); + /* + * At the time of this writing, The M88 part is + * the only supported SGMII PHY product. + */ + if (phy_id == M88_VENDOR) + break; + } else { + DEBUGOUT1("PHY address %u was unreadable\n", + phy->addr); + } + } + + /* A valid PHY type couldn't be found. */ + if (phy->addr == 8) { + phy->addr = 0; + ret_val = -E1000_ERR_PHY; + } else { + ret_val = e1000_get_phy_id(hw); + } + + /* restore previous sfp cage power state */ + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + +out: + return ret_val; +} + +/** + * e1000_phy_hw_reset_sgmii_82575 - Performs a PHY reset + * @hw: pointer to the HW structure + * + * Resets the PHY using the serial gigabit media independent interface. + **/ +static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_phy_hw_reset_sgmii_82575"); + + /* + * This isn't a true "hard" reset, but is the only reset + * available to us at this time. + */ + + DEBUGOUT("Soft resetting SGMII attached PHY...\n"); + + if (!(hw->phy.ops.write_reg)) + goto out; + + /* + * SFP documentation requires the following to configure the SPF module + * to work on SGMII. No further documentation is given. + */ + ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084); + if (ret_val) + goto out; + + ret_val = hw->phy.ops.commit(hw); + +out: + return ret_val; +} + +/** + * e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state + * @hw: pointer to the HW structure + * @active: true to enable LPLU, false to disable + * + * Sets the LPLU D0 state according to the active flag. When + * activating LPLU this function also disables smart speed + * and vice versa. LPLU will not be activated unless the + * device autonegotiation advertisement meets standards of + * either 10 or 10/100 or 10/100/1000 at all duplexes. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +static s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 data; + + DEBUGFUNC("e1000_set_d0_lplu_state_82575"); + + if (!(hw->phy.ops.read_reg)) + goto out; + + ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); + if (ret_val) + goto out; + + if (active) { + data |= IGP02E1000_PM_D0_LPLU; + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); + if (ret_val) + goto out; + + /* When LPLU is enabled, we should disable SmartSpeed */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } else { + data &= ~IGP02E1000_PM_D0_LPLU; + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) { + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + goto out; + + data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } else if (phy->smart_speed == e1000_smart_speed_off) { + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + goto out; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } + } + +out: + return ret_val; +} + +/** + * e1000_set_d0_lplu_state_82580 - Set Low Power Linkup D0 state + * @hw: pointer to the HW structure + * @active: true to enable LPLU, false to disable + * + * Sets the LPLU D0 state according to the active flag. When + * activating LPLU this function also disables smart speed + * and vice versa. LPLU will not be activated unless the + * device autonegotiation advertisement meets standards of + * either 10 or 10/100 or 10/100/1000 at all duplexes. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u32 data; + + DEBUGFUNC("e1000_set_d0_lplu_state_82580"); + + data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); + + if (active) { + data |= E1000_82580_PM_D0_LPLU; + + /* When LPLU is enabled, we should disable SmartSpeed */ + data &= ~E1000_82580_PM_SPD; + } else { + data &= ~E1000_82580_PM_D0_LPLU; + + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) + data |= E1000_82580_PM_SPD; + else if (phy->smart_speed == e1000_smart_speed_off) + data &= ~E1000_82580_PM_SPD; + } + + E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data); + return ret_val; +} + +/** + * e1000_set_d3_lplu_state_82580 - Sets low power link up state for D3 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D3 + * and SmartSpeed is disabled when active is true, else clear lplu for D3 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. + **/ +s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u32 data; + + DEBUGFUNC("e1000_set_d3_lplu_state_82580"); + + data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); + + if (!active) { + data &= ~E1000_82580_PM_D3_LPLU; + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) + data |= E1000_82580_PM_SPD; + else if (phy->smart_speed == e1000_smart_speed_off) + data &= ~E1000_82580_PM_SPD; + } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || + (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || + (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { + data |= E1000_82580_PM_D3_LPLU; + /* When LPLU is enabled, we should disable SmartSpeed */ + data &= ~E1000_82580_PM_SPD; + } + + E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data); + return ret_val; +} + +/** + * e1000_acquire_nvm_82575 - Request for access to EEPROM + * @hw: pointer to the HW structure + * + * Acquire the necessary semaphores for exclusive access to the EEPROM. + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -E1000_ERR_NVM (-1). + **/ +static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_acquire_nvm_82575"); + + ret_val = e1000_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); + if (ret_val) + goto out; + + /* + * Check if there is some access + * error this access may hook on + */ + if (hw->mac.type == e1000_i350) { + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + if (eecd & (E1000_EECD_BLOCKED | E1000_EECD_ABORT | + E1000_EECD_TIMEOUT)) { + /* Clear all access error flags */ + E1000_WRITE_REG(hw, E1000_EECD, eecd | + E1000_EECD_ERROR_CLR); + DEBUGOUT("Nvm bit banging access error detected and cleared.\n"); + } + } + if (hw->mac.type == e1000_82580) { + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + if (eecd & E1000_EECD_BLOCKED) { + /* Clear access error flag */ + E1000_WRITE_REG(hw, E1000_EECD, eecd | + E1000_EECD_BLOCKED); + DEBUGOUT("Nvm bit banging access error detected and cleared.\n"); + } + } + + + ret_val = e1000_acquire_nvm_generic(hw); + if (ret_val) + e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); + +out: + return ret_val; +} + +/** + * e1000_release_nvm_82575 - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit, + * then release the semaphores acquired. + **/ +static void e1000_release_nvm_82575(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_release_nvm_82575"); + + e1000_release_nvm_generic(hw); + + e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); +} + +/** + * e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Acquire the SW/FW semaphore to access the PHY or NVM. The mask + * will also specify which port we're acquiring the lock for. + **/ +static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + u32 fwmask = mask << 16; + s32 ret_val = E1000_SUCCESS; + s32 i = 0, timeout = 200; /* FIXME: find real value to use here */ + + DEBUGFUNC("e1000_acquire_swfw_sync_82575"); + + while (i < timeout) { + if (e1000_get_hw_semaphore_generic(hw)) { + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); + if (!(swfw_sync & (fwmask | swmask))) + break; + + /* + * Firmware currently using resource (fwmask) + * or other software thread using resource (swmask) + */ + e1000_put_hw_semaphore_generic(hw); + msec_delay_irq(5); + i++; + } + + if (i == timeout) { + DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n"); + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync |= swmask; + E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); + + e1000_put_hw_semaphore_generic(hw); + +out: + return ret_val; +} + +/** + * e1000_release_swfw_sync_82575 - Release SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Release the SW/FW semaphore used to access the PHY or NVM. The mask + * will also specify which port we're releasing the lock for. + **/ +static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + + DEBUGFUNC("e1000_release_swfw_sync_82575"); + + while (e1000_get_hw_semaphore_generic(hw) != E1000_SUCCESS) + ; /* Empty */ + + swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); + swfw_sync &= ~mask; + E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); + + e1000_put_hw_semaphore_generic(hw); +} + +/** + * e1000_get_cfg_done_82575 - Read config done bit + * @hw: pointer to the HW structure + * + * Read the management control register for the config done bit for + * completion status. NOTE: silicon which is EEPROM-less will fail trying + * to read the config done bit, so an error is *ONLY* logged and returns + * E1000_SUCCESS. If we were to return with error, EEPROM-less silicon + * would not be able to be reset or change link. + **/ +static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw) +{ + s32 timeout = PHY_CFG_TIMEOUT; + s32 ret_val = E1000_SUCCESS; + u32 mask = E1000_NVM_CFG_DONE_PORT_0; + + DEBUGFUNC("e1000_get_cfg_done_82575"); + + if (hw->bus.func == E1000_FUNC_1) + mask = E1000_NVM_CFG_DONE_PORT_1; + else if (hw->bus.func == E1000_FUNC_2) + mask = E1000_NVM_CFG_DONE_PORT_2; + else if (hw->bus.func == E1000_FUNC_3) + mask = E1000_NVM_CFG_DONE_PORT_3; + while (timeout) { + if (E1000_READ_REG(hw, E1000_EEMNGCTL) & mask) + break; + msec_delay(1); + timeout--; + } + if (!timeout) + DEBUGOUT("MNG configuration cycle has not completed.\n"); + + /* If EEPROM is not marked present, init the PHY manually */ + if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES) && + (hw->phy.type == e1000_phy_igp_3)) + e1000_phy_init_script_igp3(hw); + + return ret_val; +} + +/** + * e1000_get_link_up_info_82575 - Get link speed/duplex info + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * This is a wrapper function, if using the serial gigabit media independent + * interface, use PCS to retrieve the link speed and duplex information. + * Otherwise, use the generic function to get the link speed and duplex info. + **/ +static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + s32 ret_val; + + DEBUGFUNC("e1000_get_link_up_info_82575"); + + if (hw->phy.media_type != e1000_media_type_copper) + ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, speed, + duplex); + else + ret_val = e1000_get_speed_and_duplex_copper_generic(hw, speed, + duplex); + + return ret_val; +} + +/** + * e1000_check_for_link_82575 - Check for link + * @hw: pointer to the HW structure + * + * If sgmii is enabled, then use the pcs register to determine link, otherwise + * use the generic interface for determining link. + **/ +static s32 e1000_check_for_link_82575(struct e1000_hw *hw) +{ + s32 ret_val; + u16 speed, duplex; + + DEBUGFUNC("e1000_check_for_link_82575"); + + if (hw->phy.media_type != e1000_media_type_copper) { + ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, &speed, + &duplex); + /* + * Use this flag to determine if link needs to be checked or + * not. If we have link clear the flag so that we do not + * continue to check for link. + */ + hw->mac.get_link_status = !hw->mac.serdes_has_link; + + /* + * Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control + * settings because we may have had to re-autoneg with a + * different link partner. + */ + ret_val = e1000_config_fc_after_link_up_generic(hw); + if (ret_val) + DEBUGOUT("Error configuring flow control\n"); + } else { + ret_val = e1000_check_for_copper_link_generic(hw); + } + + return ret_val; +} + +/** + * e1000_check_for_link_media_swap - Check which M88E1112 interface linked + * @hw: pointer to the HW structure + * + * Poll the M88E1112 interfaces to see which interface achieved link. + */ +static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + u8 port = 0; + + DEBUGFUNC("e1000_check_for_link_media_swap"); + + /* Check the copper medium. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); + if (ret_val) + return ret_val; + + if (data & E1000_M88E1112_STATUS_LINK) + port = E1000_MEDIA_PORT_COPPER; + + /* Check the other medium. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); + if (ret_val) + return ret_val; + + if (data & E1000_M88E1112_STATUS_LINK) + port = E1000_MEDIA_PORT_OTHER; + + /* Determine if a swap needs to happen. */ + if (port && (hw->dev_spec._82575.media_port != port)) { + hw->dev_spec._82575.media_port = port; + hw->dev_spec._82575.media_changed = true; + } else { + ret_val = e1000_check_for_link_82575(hw); + } + + return E1000_SUCCESS; +} + +/** + * e1000_power_up_serdes_link_82575 - Power up the serdes link after shutdown + * @hw: pointer to the HW structure + **/ +static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw) +{ + u32 reg; + + DEBUGFUNC("e1000_power_up_serdes_link_82575"); + + if ((hw->phy.media_type != e1000_media_type_internal_serdes) && + !e1000_sgmii_active_82575(hw)) + return; + + /* Enable PCS to turn on link */ + reg = E1000_READ_REG(hw, E1000_PCS_CFG0); + reg |= E1000_PCS_CFG_PCS_EN; + E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); + + /* Power up the laser */ + reg = E1000_READ_REG(hw, E1000_CTRL_EXT); + reg &= ~E1000_CTRL_EXT_SDP3_DATA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); + + /* flush the write to verify completion */ + E1000_WRITE_FLUSH(hw); + msec_delay(1); +} + +/** + * e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * Using the physical coding sub-layer (PCS), retrieve the current speed and + * duplex, then store the values in the pointers provided. + **/ +static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, + u16 *speed, u16 *duplex) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 pcs; + u32 status; + + DEBUGFUNC("e1000_get_pcs_speed_and_duplex_82575"); + + /* + * Read the PCS Status register for link state. For non-copper mode, + * the status register is not accurate. The PCS status register is + * used instead. + */ + pcs = E1000_READ_REG(hw, E1000_PCS_LSTAT); + + /* + * The link up bit determines when link is up on autoneg. + */ + if (pcs & E1000_PCS_LSTS_LINK_OK) { + mac->serdes_has_link = true; + + /* Detect and store PCS speed */ + if (pcs & E1000_PCS_LSTS_SPEED_1000) + *speed = SPEED_1000; + else if (pcs & E1000_PCS_LSTS_SPEED_100) + *speed = SPEED_100; + else + *speed = SPEED_10; + + /* Detect and store PCS duplex */ + if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + /* Check if it is an I354 2.5Gb backplane connection. */ + if (mac->type == e1000_i354) { + status = E1000_READ_REG(hw, E1000_STATUS); + if ((status & E1000_STATUS_2P5_SKU) && + !(status & E1000_STATUS_2P5_SKU_OVER)) { + *speed = SPEED_2500; + *duplex = FULL_DUPLEX; + DEBUGOUT("2500 Mbs, "); + DEBUGOUT("Full Duplex\n"); + } + } + + } else { + mac->serdes_has_link = false; + *speed = 0; + *duplex = 0; + } + + return E1000_SUCCESS; +} + +/** + * e1000_shutdown_serdes_link_82575 - Remove link during power down + * @hw: pointer to the HW structure + * + * In the case of serdes shut down sfp and PCS on driver unload + * when management pass through is not enabled. + **/ +void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw) +{ + u32 reg; + + DEBUGFUNC("e1000_shutdown_serdes_link_82575"); + + if ((hw->phy.media_type != e1000_media_type_internal_serdes) && + !e1000_sgmii_active_82575(hw)) + return; + + if (!e1000_enable_mng_pass_thru(hw)) { + /* Disable PCS to turn off link */ + reg = E1000_READ_REG(hw, E1000_PCS_CFG0); + reg &= ~E1000_PCS_CFG_PCS_EN; + E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); + + /* shutdown the laser */ + reg = E1000_READ_REG(hw, E1000_CTRL_EXT); + reg |= E1000_CTRL_EXT_SDP3_DATA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); + + /* flush the write to verify completion */ + E1000_WRITE_FLUSH(hw); + msec_delay(1); + } + + return; +} + +/** + * e1000_reset_hw_82575 - Reset hardware + * @hw: pointer to the HW structure + * + * This resets the hardware into a known state. + **/ +static s32 e1000_reset_hw_82575(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val; + + DEBUGFUNC("e1000_reset_hw_82575"); + + /* + * Prevent the PCI-E bus from sticking if there is no TLP connection + * on the last TLP read/write transaction when MAC is reset. + */ + ret_val = e1000_disable_pcie_master_generic(hw); + if (ret_val) + DEBUGOUT("PCI-E Master disable polling has failed.\n"); + + /* set the completion timeout for interface */ + ret_val = e1000_set_pcie_completion_timeout(hw); + if (ret_val) + DEBUGOUT("PCI-E Set completion timeout has failed.\n"); + + DEBUGOUT("Masking off all interrupts\n"); + E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); + + E1000_WRITE_REG(hw, E1000_RCTL, 0); + E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP); + E1000_WRITE_FLUSH(hw); + + msec_delay(10); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + + DEBUGOUT("Issuing a global reset to MAC\n"); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST); + + ret_val = e1000_get_auto_rd_done_generic(hw); + if (ret_val) { + /* + * When auto config read does not complete, do not + * return with an error. This can happen in situations + * where there is no eeprom and prevents getting link. + */ + DEBUGOUT("Auto Read Done did not complete\n"); + } + + /* If EEPROM is not present, run manual init scripts */ + if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES)) + e1000_reset_init_script_82575(hw); + + /* Clear any pending interrupt events. */ + E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); + E1000_READ_REG(hw, E1000_ICR); + + /* Install any alternate MAC address into RAR0 */ + ret_val = e1000_check_alt_mac_addr_generic(hw); + + return ret_val; +} + +/** + * e1000_init_hw_82575 - Initialize hardware + * @hw: pointer to the HW structure + * + * This inits the hardware readying it for operation. + **/ +static s32 e1000_init_hw_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + u16 i, rar_count = mac->rar_entry_count; + + DEBUGFUNC("e1000_init_hw_82575"); + + /* Initialize identification LED */ + ret_val = mac->ops.id_led_init(hw); + if (ret_val) { + DEBUGOUT("Error initializing identification LED\n"); + /* This is not fatal and we should not stop init due to this */ + } + + /* Disabling VLAN filtering */ + DEBUGOUT("Initializing the IEEE VLAN\n"); + mac->ops.clear_vfta(hw); + + /* Setup the receive address */ + e1000_init_rx_addrs_generic(hw, rar_count); + + /* Zero out the Multicast HASH table */ + DEBUGOUT("Zeroing the MTA\n"); + for (i = 0; i < mac->mta_reg_count; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); + + /* Zero out the Unicast HASH table */ + DEBUGOUT("Zeroing the UTA\n"); + for (i = 0; i < mac->uta_reg_count; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_UTA, i, 0); + + /* Setup link and flow control */ + ret_val = mac->ops.setup_link(hw); + + /* Set the default MTU size */ + hw->dev_spec._82575.mtu = 1500; + + /* + * Clear all of the statistics registers (clear on read). It is + * important that we do this after we have tried to establish link + * because the symbol error count will increment wildly if there + * is no link. + */ + e1000_clear_hw_cntrs_82575(hw); + + return ret_val; +} + +/** + * e1000_setup_copper_link_82575 - Configure copper link settings + * @hw: pointer to the HW structure + * + * Configures the link for auto-neg or forced speed and duplex. Then we check + * for link, once link is established calls to configure collision distance + * and flow control are called. + **/ +static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val; + u32 phpm_reg; + + DEBUGFUNC("e1000_setup_copper_link_82575"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= E1000_CTRL_SLU; + ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Clear Go Link Disconnect bit on supported devices */ + switch (hw->mac.type) { + case e1000_82580: + case e1000_i350: + case e1000_i210: + case e1000_i211: + phpm_reg = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); + phpm_reg &= ~E1000_82580_PM_GO_LINKD; + E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, phpm_reg); + break; + default: + break; + } + + ret_val = e1000_setup_serdes_link_82575(hw); + if (ret_val) + goto out; + + if (e1000_sgmii_active_82575(hw) && !hw->phy.reset_disable) { + /* allow time for SFP cage time to power up phy */ + msec_delay(300); + + ret_val = hw->phy.ops.reset(hw); + if (ret_val) { + DEBUGOUT("Error resetting the PHY.\n"); + goto out; + } + } + switch (hw->phy.type) { + case e1000_phy_i210: + case e1000_phy_m88: + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case M88E1543_E_PHY_ID: + case I210_I_PHY_ID: + ret_val = e1000_copper_link_setup_m88_gen2(hw); + break; + default: + ret_val = e1000_copper_link_setup_m88(hw); + break; + } + break; + case e1000_phy_igp_3: + ret_val = e1000_copper_link_setup_igp(hw); + break; + case e1000_phy_82580: + ret_val = e1000_copper_link_setup_82577(hw); + break; + default: + ret_val = -E1000_ERR_PHY; + break; + } + + if (ret_val) + goto out; + + ret_val = e1000_setup_copper_link_generic(hw); +out: + return ret_val; +} + +/** + * e1000_setup_serdes_link_82575 - Setup link for serdes + * @hw: pointer to the HW structure + * + * Configure the physical coding sub-layer (PCS) link. The PCS link is + * used on copper connections where the serialized gigabit media independent + * interface (sgmii), or serdes fiber is being used. Configures the link + * for auto-negotiation or forces speed/duplex. + **/ +static s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw) +{ + u32 ctrl_ext, ctrl_reg, reg, anadv_reg; + bool pcs_autoneg; + s32 ret_val = E1000_SUCCESS; + u16 data; + + DEBUGFUNC("e1000_setup_serdes_link_82575"); + + if ((hw->phy.media_type != e1000_media_type_internal_serdes) && + !e1000_sgmii_active_82575(hw)) + return ret_val; + + /* + * On the 82575, SerDes loopback mode persists until it is + * explicitly turned off or a power cycle is performed. A read to + * the register does not indicate its status. Therefore, we ensure + * loopback mode is disabled during initialization. + */ + E1000_WRITE_REG(hw, E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); + + /* power on the sfp cage if present */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + + ctrl_reg = E1000_READ_REG(hw, E1000_CTRL); + ctrl_reg |= E1000_CTRL_SLU; + + /* set both sw defined pins on 82575/82576*/ + if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) + ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1; + + reg = E1000_READ_REG(hw, E1000_PCS_LCTL); + + /* default pcs_autoneg to the same setting as mac autoneg */ + pcs_autoneg = hw->mac.autoneg; + + switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) { + case E1000_CTRL_EXT_LINK_MODE_SGMII: + /* sgmii mode lets the phy handle forcing speed/duplex */ + pcs_autoneg = true; + /* autoneg time out should be disabled for SGMII mode */ + reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT); + break; + case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: + /* disable PCS autoneg and support parallel detect only */ + pcs_autoneg = false; + /* fall through to default case */ + default: + if (hw->mac.type == e1000_82575 || + hw->mac.type == e1000_82576) { + ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT) + pcs_autoneg = false; + } + + /* + * non-SGMII modes only supports a speed of 1000/Full for the + * link so it is best to just force the MAC and let the pcs + * link either autoneg or be forced to 1000/Full + */ + ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD | + E1000_CTRL_FD | E1000_CTRL_FRCDPX; + + /* set speed of 1000/Full if speed/duplex is forced */ + reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL; + break; + } + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl_reg); + + /* + * New SerDes mode allows for forcing speed or autonegotiating speed + * at 1gb. Autoneg should be default set by most drivers. This is the + * mode that will be compatible with older link partners and switches. + * However, both are supported by the hardware and some drivers/tools. + */ + reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP | + E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); + + if (pcs_autoneg) { + /* Set PCS register for autoneg */ + reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ + E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ + + /* Disable force flow control for autoneg */ + reg &= ~E1000_PCS_LCTL_FORCE_FCTRL; + + /* Configure flow control advertisement for autoneg */ + anadv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV); + anadv_reg &= ~(E1000_TXCW_ASM_DIR | E1000_TXCW_PAUSE); + + switch (hw->fc.requested_mode) { + case e1000_fc_full: + case e1000_fc_rx_pause: + anadv_reg |= E1000_TXCW_ASM_DIR; + anadv_reg |= E1000_TXCW_PAUSE; + break; + case e1000_fc_tx_pause: + anadv_reg |= E1000_TXCW_ASM_DIR; + break; + default: + break; + } + + E1000_WRITE_REG(hw, E1000_PCS_ANADV, anadv_reg); + + DEBUGOUT1("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg); + } else { + /* Set PCS register for forced link */ + reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ + + /* Force flow control for forced link */ + reg |= E1000_PCS_LCTL_FORCE_FCTRL; + + DEBUGOUT1("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg); + } + + E1000_WRITE_REG(hw, E1000_PCS_LCTL, reg); + + if (!pcs_autoneg && !e1000_sgmii_active_82575(hw)) + e1000_force_mac_fc_generic(hw); + + return ret_val; +} + +/** + * e1000_get_media_type_82575 - derives current media type. + * @hw: pointer to the HW structure + * + * The media type is chosen reflecting few settings. + * The following are taken into account: + * - link mode set in the current port Init Control Word #3 + * - current link mode settings in CSR register + * - MDIO vs. I2C PHY control interface chosen + * - SFP module media type + **/ +static s32 e1000_get_media_type_82575(struct e1000_hw *hw) +{ + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + s32 ret_val = E1000_SUCCESS; + u32 ctrl_ext = 0; + u32 link_mode = 0; + + /* Set internal phy as default */ + dev_spec->sgmii_active = false; + dev_spec->module_plugged = false; + + /* Get CSR setting */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + + /* extract link mode setting */ + link_mode = ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK; + + switch (link_mode) { + case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: + hw->phy.media_type = e1000_media_type_internal_serdes; + break; + case E1000_CTRL_EXT_LINK_MODE_GMII: + hw->phy.media_type = e1000_media_type_copper; + break; + case E1000_CTRL_EXT_LINK_MODE_SGMII: + /* Get phy control interface type set (MDIO vs. I2C)*/ + if (e1000_sgmii_uses_mdio_82575(hw)) { + hw->phy.media_type = e1000_media_type_copper; + dev_spec->sgmii_active = true; + break; + } + /* fall through for I2C based SGMII */ + case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: + /* read media type from SFP EEPROM */ + ret_val = e1000_set_sfp_media_type_82575(hw); + if ((ret_val != E1000_SUCCESS) || + (hw->phy.media_type == e1000_media_type_unknown)) { + /* + * If media type was not identified then return media + * type defined by the CTRL_EXT settings. + */ + hw->phy.media_type = e1000_media_type_internal_serdes; + + if (link_mode == E1000_CTRL_EXT_LINK_MODE_SGMII) { + hw->phy.media_type = e1000_media_type_copper; + dev_spec->sgmii_active = true; + } + + break; + } + + /* do not change link mode for 100BaseFX */ + if (dev_spec->eth_flags.e100_base_fx) + break; + + /* change current link mode setting */ + ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK; + + if (hw->phy.media_type == e1000_media_type_copper) + ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_SGMII; + else + ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; + + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + + break; + } + + return ret_val; +} + +/** + * e1000_set_sfp_media_type_82575 - derives SFP module media type. + * @hw: pointer to the HW structure + * + * The media type is chosen based on SFP module. + * compatibility flags retrieved from SFP ID EEPROM. + **/ +static s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw) +{ + s32 ret_val = E1000_ERR_CONFIG; + u32 ctrl_ext = 0; + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + struct sfp_e1000_flags *eth_flags = &dev_spec->eth_flags; + u8 tranceiver_type = 0; + s32 timeout = 3; + + /* Turn I2C interface ON and power on sfp cage */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_I2C_ENA); + + E1000_WRITE_FLUSH(hw); + + /* Read SFP module data */ + while (timeout) { + ret_val = e1000_read_sfp_data_byte(hw, + E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_IDENTIFIER_OFFSET), + &tranceiver_type); + if (ret_val == E1000_SUCCESS) + break; + msec_delay(100); + timeout--; + } + if (ret_val != E1000_SUCCESS) + goto out; + + ret_val = e1000_read_sfp_data_byte(hw, + E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_ETH_FLAGS_OFFSET), + (u8 *)eth_flags); + if (ret_val != E1000_SUCCESS) + goto out; + + /* Check if there is some SFP module plugged and powered */ + if ((tranceiver_type == E1000_SFF_IDENTIFIER_SFP) || + (tranceiver_type == E1000_SFF_IDENTIFIER_SFF)) { + dev_spec->module_plugged = true; + if (eth_flags->e1000_base_lx || eth_flags->e1000_base_sx) { + hw->phy.media_type = e1000_media_type_internal_serdes; + } else if (eth_flags->e100_base_fx) { + dev_spec->sgmii_active = true; + hw->phy.media_type = e1000_media_type_internal_serdes; + } else if (eth_flags->e1000_base_t) { + dev_spec->sgmii_active = true; + hw->phy.media_type = e1000_media_type_copper; + } else { + hw->phy.media_type = e1000_media_type_unknown; + DEBUGOUT("PHY module has not been recognized\n"); + goto out; + } + } else { + hw->phy.media_type = e1000_media_type_unknown; + } + ret_val = E1000_SUCCESS; +out: + /* Restore I2C interface setting */ + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + return ret_val; +} + +/** + * e1000_valid_led_default_82575 - Verify a valid default LED config + * @hw: pointer to the HW structure + * @data: pointer to the NVM (EEPROM) + * + * Read the EEPROM for the current default LED configuration. If the + * LED configuration is not valid, set to a valid LED configuration. + **/ +static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_valid_led_default_82575"); + + ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + + if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) { + switch (hw->phy.media_type) { + case e1000_media_type_internal_serdes: + *data = ID_LED_DEFAULT_82575_SERDES; + break; + case e1000_media_type_copper: + default: + *data = ID_LED_DEFAULT; + break; + } + } +out: + return ret_val; +} + +/** + * e1000_sgmii_active_82575 - Return sgmii state + * @hw: pointer to the HW structure + * + * 82575 silicon has a serialized gigabit media independent interface (sgmii) + * which can be enabled for use in the embedded applications. Simply + * return the current state of the sgmii interface. + **/ +static bool e1000_sgmii_active_82575(struct e1000_hw *hw) +{ + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + return dev_spec->sgmii_active; +} + +/** + * e1000_reset_init_script_82575 - Inits HW defaults after reset + * @hw: pointer to the HW structure + * + * Inits recommended HW defaults after a reset when there is no EEPROM + * detected. This is only for the 82575. + **/ +static s32 e1000_reset_init_script_82575(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_reset_init_script_82575"); + + if (hw->mac.type == e1000_82575) { + DEBUGOUT("Running reset init script for 82575\n"); + /* SerDes configuration via SERDESCTRL */ + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x00, 0x0C); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x01, 0x78); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x1B, 0x23); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x23, 0x15); + + /* CCM configuration via CCMCTL register */ + e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x14, 0x00); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x10, 0x00); + + /* PCIe lanes configuration */ + e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x00, 0xEC); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x61, 0xDF); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x34, 0x05); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x2F, 0x81); + + /* PCIe PLL Configuration */ + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x02, 0x47); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x14, 0x00); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x10, 0x00); + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_mac_addr_82575 - Read device MAC address + * @hw: pointer to the HW structure + **/ +static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_read_mac_addr_82575"); + + /* + * If there's an alternate MAC address place it in RAR0 + * so that it will override the Si installed default perm + * address. + */ + ret_val = e1000_check_alt_mac_addr_generic(hw); + if (ret_val) + goto out; + + ret_val = e1000_read_mac_addr_generic(hw); + +out: + return ret_val; +} + +/** + * e1000_config_collision_dist_82575 - Configure collision distance + * @hw: pointer to the HW structure + * + * Configures the collision distance to the default value and is used + * during link setup. + **/ +static void e1000_config_collision_dist_82575(struct e1000_hw *hw) +{ + u32 tctl_ext; + + DEBUGFUNC("e1000_config_collision_dist_82575"); + + tctl_ext = E1000_READ_REG(hw, E1000_TCTL_EXT); + + tctl_ext &= ~E1000_TCTL_EXT_COLD; + tctl_ext |= E1000_COLLISION_DISTANCE << E1000_TCTL_EXT_COLD_SHIFT; + + E1000_WRITE_REG(hw, E1000_TCTL_EXT, tctl_ext); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_power_down_phy_copper_82575 - Remove link during PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, remove the link. + **/ +static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + + if (!(phy->ops.check_reset_block)) + return; + + /* If the management interface is not enabled, then power down */ + if (!(e1000_enable_mng_pass_thru(hw) || phy->ops.check_reset_block(hw))) + e1000_power_down_phy_copper(hw); + + return; +} + +/** + * e1000_clear_hw_cntrs_82575 - Clear device specific hardware counters + * @hw: pointer to the HW structure + * + * Clears the hardware counters by reading the counter registers. + **/ +static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_clear_hw_cntrs_82575"); + + e1000_clear_hw_cntrs_base_generic(hw); + + E1000_READ_REG(hw, E1000_PRC64); + E1000_READ_REG(hw, E1000_PRC127); + E1000_READ_REG(hw, E1000_PRC255); + E1000_READ_REG(hw, E1000_PRC511); + E1000_READ_REG(hw, E1000_PRC1023); + E1000_READ_REG(hw, E1000_PRC1522); + E1000_READ_REG(hw, E1000_PTC64); + E1000_READ_REG(hw, E1000_PTC127); + E1000_READ_REG(hw, E1000_PTC255); + E1000_READ_REG(hw, E1000_PTC511); + E1000_READ_REG(hw, E1000_PTC1023); + E1000_READ_REG(hw, E1000_PTC1522); + + E1000_READ_REG(hw, E1000_ALGNERRC); + E1000_READ_REG(hw, E1000_RXERRC); + E1000_READ_REG(hw, E1000_TNCRS); + E1000_READ_REG(hw, E1000_CEXTERR); + E1000_READ_REG(hw, E1000_TSCTC); + E1000_READ_REG(hw, E1000_TSCTFC); + + E1000_READ_REG(hw, E1000_MGTPRC); + E1000_READ_REG(hw, E1000_MGTPDC); + E1000_READ_REG(hw, E1000_MGTPTC); + + E1000_READ_REG(hw, E1000_IAC); + E1000_READ_REG(hw, E1000_ICRXOC); + + E1000_READ_REG(hw, E1000_ICRXPTC); + E1000_READ_REG(hw, E1000_ICRXATC); + E1000_READ_REG(hw, E1000_ICTXPTC); + E1000_READ_REG(hw, E1000_ICTXATC); + E1000_READ_REG(hw, E1000_ICTXQEC); + E1000_READ_REG(hw, E1000_ICTXQMTC); + E1000_READ_REG(hw, E1000_ICRXDMTC); + + E1000_READ_REG(hw, E1000_CBTMPC); + E1000_READ_REG(hw, E1000_HTDPMC); + E1000_READ_REG(hw, E1000_CBRMPC); + E1000_READ_REG(hw, E1000_RPTHC); + E1000_READ_REG(hw, E1000_HGPTC); + E1000_READ_REG(hw, E1000_HTCBDPC); + E1000_READ_REG(hw, E1000_HGORCL); + E1000_READ_REG(hw, E1000_HGORCH); + E1000_READ_REG(hw, E1000_HGOTCL); + E1000_READ_REG(hw, E1000_HGOTCH); + E1000_READ_REG(hw, E1000_LENERRS); + + /* This register should not be read in copper configurations */ + if ((hw->phy.media_type == e1000_media_type_internal_serdes) || + e1000_sgmii_active_82575(hw)) + E1000_READ_REG(hw, E1000_SCVPC); +} + +/** + * e1000_rx_fifo_flush_82575 - Clean rx fifo after Rx enable + * @hw: pointer to the HW structure + * + * After rx enable if managability is enabled then there is likely some + * bad data at the start of the fifo and possibly in the DMA fifo. This + * function clears the fifos and flushes any packets that came in as rx was + * being enabled. + **/ +void e1000_rx_fifo_flush_82575(struct e1000_hw *hw) +{ + u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled; + int i, ms_wait; + + DEBUGFUNC("e1000_rx_fifo_workaround_82575"); + if (hw->mac.type != e1000_82575 || + !(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN)) + return; + + /* Disable all Rx queues */ + for (i = 0; i < 4; i++) { + rxdctl[i] = E1000_READ_REG(hw, E1000_RXDCTL(i)); + E1000_WRITE_REG(hw, E1000_RXDCTL(i), + rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE); + } + /* Poll all queues to verify they have shut down */ + for (ms_wait = 0; ms_wait < 10; ms_wait++) { + msec_delay(1); + rx_enabled = 0; + for (i = 0; i < 4; i++) + rx_enabled |= E1000_READ_REG(hw, E1000_RXDCTL(i)); + if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE)) + break; + } + + if (ms_wait == 10) + DEBUGOUT("Queue disable timed out after 10ms\n"); + + /* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all + * incoming packets are rejected. Set enable and wait 2ms so that + * any packet that was coming in as RCTL.EN was set is flushed + */ + rfctl = E1000_READ_REG(hw, E1000_RFCTL); + E1000_WRITE_REG(hw, E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF); + + rlpml = E1000_READ_REG(hw, E1000_RLPML); + E1000_WRITE_REG(hw, E1000_RLPML, 0); + + rctl = E1000_READ_REG(hw, E1000_RCTL); + temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP); + temp_rctl |= E1000_RCTL_LPE; + + E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl); + E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl | E1000_RCTL_EN); + E1000_WRITE_FLUSH(hw); + msec_delay(2); + + /* Enable Rx queues that were previously enabled and restore our + * previous state + */ + for (i = 0; i < 4; i++) + E1000_WRITE_REG(hw, E1000_RXDCTL(i), rxdctl[i]); + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + E1000_WRITE_FLUSH(hw); + + E1000_WRITE_REG(hw, E1000_RLPML, rlpml); + E1000_WRITE_REG(hw, E1000_RFCTL, rfctl); + + /* Flush receive errors generated by workaround */ + E1000_READ_REG(hw, E1000_ROC); + E1000_READ_REG(hw, E1000_RNBC); + E1000_READ_REG(hw, E1000_MPC); +} + +/** + * e1000_set_pcie_completion_timeout - set pci-e completion timeout + * @hw: pointer to the HW structure + * + * The defaults for 82575 and 82576 should be in the range of 50us to 50ms, + * however the hardware default for these parts is 500us to 1ms which is less + * than the 10ms recommended by the pci-e spec. To address this we need to + * increase the value to either 10ms to 200ms for capability version 1 config, + * or 16ms to 55ms for version 2. + **/ +static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw) +{ + u32 gcr = E1000_READ_REG(hw, E1000_GCR); + s32 ret_val = E1000_SUCCESS; + u16 pcie_devctl2; + + /* only take action if timeout value is defaulted to 0 */ + if (gcr & E1000_GCR_CMPL_TMOUT_MASK) + goto out; + + /* + * if capababilities version is type 1 we can write the + * timeout of 10ms to 200ms through the GCR register + */ + if (!(gcr & E1000_GCR_CAP_VER2)) { + gcr |= E1000_GCR_CMPL_TMOUT_10ms; + goto out; + } + + /* + * for version 2 capabilities we need to write the config space + * directly in order to set the completion timeout value for + * 16ms to 55ms + */ + ret_val = e1000_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, + &pcie_devctl2); + if (ret_val) + goto out; + + pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms; + + ret_val = e1000_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, + &pcie_devctl2); +out: + /* disable completion timeout resend */ + gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND; + + E1000_WRITE_REG(hw, E1000_GCR, gcr); + return ret_val; +} + +/** + * e1000_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing + * @hw: pointer to the hardware struct + * @enable: state to enter, either enabled or disabled + * @pf: Physical Function pool - do not set anti-spoofing for the PF + * + * enables/disables L2 switch anti-spoofing functionality. + **/ +void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf) +{ + u32 reg_val, reg_offset; + + switch (hw->mac.type) { + case e1000_82576: + reg_offset = E1000_DTXSWC; + break; + case e1000_i350: + case e1000_i354: + reg_offset = E1000_TXSWC; + break; + default: + return; + } + + reg_val = E1000_READ_REG(hw, reg_offset); + if (enable) { + reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); + /* The PF can spoof - it has to in order to + * support emulation mode NICs + */ + reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); + } else { + reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); + } + E1000_WRITE_REG(hw, reg_offset, reg_val); +} + +/** + * e1000_vmdq_set_loopback_pf - enable or disable vmdq loopback + * @hw: pointer to the hardware struct + * @enable: state to enter, either enabled or disabled + * + * enables/disables L2 switch loopback functionality. + **/ +void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable) +{ + u32 dtxswc; + + switch (hw->mac.type) { + case e1000_82576: + dtxswc = E1000_READ_REG(hw, E1000_DTXSWC); + if (enable) + dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN; + else + dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; + E1000_WRITE_REG(hw, E1000_DTXSWC, dtxswc); + break; + case e1000_i350: + case e1000_i354: + dtxswc = E1000_READ_REG(hw, E1000_TXSWC); + if (enable) + dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN; + else + dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; + E1000_WRITE_REG(hw, E1000_TXSWC, dtxswc); + break; + default: + /* Currently no other hardware supports loopback */ + break; + } + + +} + +/** + * e1000_vmdq_set_replication_pf - enable or disable vmdq replication + * @hw: pointer to the hardware struct + * @enable: state to enter, either enabled or disabled + * + * enables/disables replication of packets across multiple pools. + **/ +void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable) +{ + u32 vt_ctl = E1000_READ_REG(hw, E1000_VT_CTL); + + if (enable) + vt_ctl |= E1000_VT_CTL_VM_REPL_EN; + else + vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN; + + E1000_WRITE_REG(hw, E1000_VT_CTL, vt_ctl); +} + +/** + * e1000_read_phy_reg_82580 - Read 82580 MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the MDI control register in the PHY at offset and stores the + * information read to data. + **/ +static s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_read_phy_reg_82580"); + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + ret_val = e1000_read_phy_reg_mdic(hw, offset, data); + + hw->phy.ops.release(hw); + +out: + return ret_val; +} + +/** + * e1000_write_phy_reg_82580 - Write 82580 MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write to register at offset + * + * Writes data to MDI control register in the PHY at offset. + **/ +static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_write_phy_reg_82580"); + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + ret_val = e1000_write_phy_reg_mdic(hw, offset, data); + + hw->phy.ops.release(hw); + +out: + return ret_val; +} + +/** + * e1000_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits + * @hw: pointer to the HW structure + * + * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on + * the values found in the EEPROM. This addresses an issue in which these + * bits are not restored from EEPROM after reset. + **/ +static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u32 mdicnfg; + u16 nvm_data = 0; + + DEBUGFUNC("e1000_reset_mdicnfg_82580"); + + if (hw->mac.type != e1000_82580) + goto out; + if (!e1000_sgmii_active_82575(hw)) + goto out; + + ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + + NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, + &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + + mdicnfg = E1000_READ_REG(hw, E1000_MDICNFG); + if (nvm_data & NVM_WORD24_EXT_MDIO) + mdicnfg |= E1000_MDICNFG_EXT_MDIO; + if (nvm_data & NVM_WORD24_COM_MDIO) + mdicnfg |= E1000_MDICNFG_COM_MDIO; + E1000_WRITE_REG(hw, E1000_MDICNFG, mdicnfg); +out: + return ret_val; +} + +/** + * e1000_reset_hw_82580 - Reset hardware + * @hw: pointer to the HW structure + * + * This resets function or entire device (all ports, etc.) + * to a known state. + **/ +static s32 e1000_reset_hw_82580(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + /* BH SW mailbox bit in SW_FW_SYNC */ + u16 swmbsw_mask = E1000_SW_SYNCH_MB; + u32 ctrl; + bool global_device_reset = hw->dev_spec._82575.global_device_reset; + + DEBUGFUNC("e1000_reset_hw_82580"); + + hw->dev_spec._82575.global_device_reset = false; + + /* 82580 does not reliably do global_device_reset due to hw errata */ + if (hw->mac.type == e1000_82580) + global_device_reset = false; + + /* Get current control state. */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + + /* + * Prevent the PCI-E bus from sticking if there is no TLP connection + * on the last TLP read/write transaction when MAC is reset. + */ + ret_val = e1000_disable_pcie_master_generic(hw); + if (ret_val) + DEBUGOUT("PCI-E Master disable polling has failed.\n"); + + DEBUGOUT("Masking off all interrupts\n"); + E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); + E1000_WRITE_REG(hw, E1000_RCTL, 0); + E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP); + E1000_WRITE_FLUSH(hw); + + msec_delay(10); + + /* Determine whether or not a global dev reset is requested */ + if (global_device_reset && hw->mac.ops.acquire_swfw_sync(hw, + swmbsw_mask)) + global_device_reset = false; + + if (global_device_reset && !(E1000_READ_REG(hw, E1000_STATUS) & + E1000_STAT_DEV_RST_SET)) + ctrl |= E1000_CTRL_DEV_RST; + else + ctrl |= E1000_CTRL_RST; + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + E1000_WRITE_FLUSH(hw); + + /* Add delay to insure DEV_RST has time to complete */ + if (global_device_reset) + msec_delay(5); + + ret_val = e1000_get_auto_rd_done_generic(hw); + if (ret_val) { + /* + * When auto config read does not complete, do not + * return with an error. This can happen in situations + * where there is no eeprom and prevents getting link. + */ + DEBUGOUT("Auto Read Done did not complete\n"); + } + + /* clear global device reset status bit */ + E1000_WRITE_REG(hw, E1000_STATUS, E1000_STAT_DEV_RST_SET); + + /* Clear any pending interrupt events. */ + E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); + E1000_READ_REG(hw, E1000_ICR); + + ret_val = e1000_reset_mdicnfg_82580(hw); + if (ret_val) + DEBUGOUT("Could not reset MDICNFG based on EEPROM\n"); + + /* Install any alternate MAC address into RAR0 */ + ret_val = e1000_check_alt_mac_addr_generic(hw); + + /* Release semaphore */ + if (global_device_reset) + hw->mac.ops.release_swfw_sync(hw, swmbsw_mask); + + return ret_val; +} + +/** + * e1000_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual Rx PBA size + * @data: data received by reading RXPBS register + * + * The 82580 uses a table based approach for packet buffer allocation sizes. + * This function converts the retrieved value into the correct table value + * 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 + * 0x0 36 72 144 1 2 4 8 16 + * 0x8 35 70 140 rsv rsv rsv rsv rsv + */ +u16 e1000_rxpbs_adjust_82580(u32 data) +{ + u16 ret_val = 0; + + if (data < E1000_82580_RXPBS_TABLE_SIZE) + ret_val = e1000_82580_rxpbs_table[data]; + + return ret_val; +} + +/** + * e1000_validate_nvm_checksum_with_offset - Validate EEPROM + * checksum + * @hw: pointer to the HW structure + * @offset: offset in words of the checksum protected region + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + **/ +s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset) +{ + s32 ret_val = E1000_SUCCESS; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_validate_nvm_checksum_with_offset"); + + for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + checksum += nvm_data; + } + + if (checksum != (u16) NVM_SUM) { + DEBUGOUT("NVM Checksum Invalid\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_update_nvm_checksum_with_offset - Update EEPROM + * checksum + * @hw: pointer to the HW structure + * @offset: offset in words of the checksum protected region + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. + **/ +s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset) +{ + s32 ret_val; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_update_nvm_checksum_with_offset"); + + for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error while updating checksum.\n"); + goto out; + } + checksum += nvm_data; + } + checksum = (u16) NVM_SUM - checksum; + ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1, + &checksum); + if (ret_val) + DEBUGOUT("NVM Write Error while updating checksum.\n"); + +out: + return ret_val; +} + +/** + * e1000_validate_nvm_checksum_82580 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM section checksum by reading/adding each word of + * the EEPROM and then verifies that the sum of the EEPROM is + * equal to 0xBABA. + **/ +static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 eeprom_regions_count = 1; + u16 j, nvm_data; + u16 nvm_offset; + + DEBUGFUNC("e1000_validate_nvm_checksum_82580"); + + ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + + if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) { + /* if chekcsums compatibility bit is set validate checksums + * for all 4 ports. */ + eeprom_regions_count = 4; + } + + for (j = 0; j < eeprom_regions_count; j++) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); + ret_val = e1000_validate_nvm_checksum_with_offset(hw, + nvm_offset); + if (ret_val != E1000_SUCCESS) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_update_nvm_checksum_82580 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM section checksums for all 4 ports by reading/adding + * each word of the EEPROM up to the checksum. Then calculates the EEPROM + * checksum and writes the value to the EEPROM. + **/ +static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw) +{ + s32 ret_val; + u16 j, nvm_data; + u16 nvm_offset; + + DEBUGFUNC("e1000_update_nvm_checksum_82580"); + + ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error while updating checksum compatibility bit.\n"); + goto out; + } + + if (!(nvm_data & NVM_COMPATIBILITY_BIT_MASK)) { + /* set compatibility bit to validate checksums appropriately */ + nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK; + ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1, + &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Write Error while updating checksum compatibility bit.\n"); + goto out; + } + } + + for (j = 0; j < 4; j++) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); + ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset); + if (ret_val) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_validate_nvm_checksum_i350 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM section checksum by reading/adding each word of + * the EEPROM and then verifies that the sum of the EEPROM is + * equal to 0xBABA. + **/ +static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 j; + u16 nvm_offset; + + DEBUGFUNC("e1000_validate_nvm_checksum_i350"); + + for (j = 0; j < 4; j++) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); + ret_val = e1000_validate_nvm_checksum_with_offset(hw, + nvm_offset); + if (ret_val != E1000_SUCCESS) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_update_nvm_checksum_i350 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM section checksums for all 4 ports by reading/adding + * each word of the EEPROM up to the checksum. Then calculates the EEPROM + * checksum and writes the value to the EEPROM. + **/ +static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 j; + u16 nvm_offset; + + DEBUGFUNC("e1000_update_nvm_checksum_i350"); + + for (j = 0; j < 4; j++) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); + ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset); + if (ret_val != E1000_SUCCESS) + goto out; + } + +out: + return ret_val; +} + +/** + * __e1000_access_emi_reg - Read/write EMI register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: pointer to value to read/write from/to the EMI address + * @read: boolean flag to indicate read or write + **/ +static s32 __e1000_access_emi_reg(struct e1000_hw *hw, u16 address, + u16 *data, bool read) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("__e1000_access_emi_reg"); + + ret_val = hw->phy.ops.write_reg(hw, E1000_EMIADD, address); + if (ret_val) + return ret_val; + + if (read) + ret_val = hw->phy.ops.read_reg(hw, E1000_EMIDATA, data); + else + ret_val = hw->phy.ops.write_reg(hw, E1000_EMIDATA, *data); + + return ret_val; +} + +/** + * e1000_read_emi_reg - Read Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be read from the EMI address + **/ +s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data) +{ + DEBUGFUNC("e1000_read_emi_reg"); + + return __e1000_access_emi_reg(hw, addr, data, true); +} + +/** + * e1000_set_eee_i350 - Enable/disable EEE support + * @hw: pointer to the HW structure + * + * Enable/disable EEE based on setting in dev_spec structure. + * + **/ +s32 e1000_set_eee_i350(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u32 ipcnfg, eeer; + + DEBUGFUNC("e1000_set_eee_i350"); + + if ((hw->mac.type < e1000_i350) || + (hw->phy.media_type != e1000_media_type_copper)) + goto out; + ipcnfg = E1000_READ_REG(hw, E1000_IPCNFG); + eeer = E1000_READ_REG(hw, E1000_EEER); + + /* enable or disable per user setting */ + if (!(hw->dev_spec._82575.eee_disable)) { + u32 eee_su = E1000_READ_REG(hw, E1000_EEE_SU); + + ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); + eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | + E1000_EEER_LPI_FC); + + /* This bit should not be set in normal operation. */ + if (eee_su & E1000_EEE_SU_LPI_CLK_STP) + DEBUGOUT("LPI Clock Stop Bit should not be set!\n"); + } else { + ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); + eeer &= ~(E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | + E1000_EEER_LPI_FC); + } + E1000_WRITE_REG(hw, E1000_IPCNFG, ipcnfg); + E1000_WRITE_REG(hw, E1000_EEER, eeer); + E1000_READ_REG(hw, E1000_IPCNFG); + E1000_READ_REG(hw, E1000_EEER); +out: + + return ret_val; +} + +/** + * e1000_set_eee_i354 - Enable/disable EEE support + * @hw: pointer to the HW structure + * + * Enable/disable EEE legacy mode based on setting in dev_spec structure. + * + **/ +s32 e1000_set_eee_i354(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 phy_data; + + DEBUGFUNC("e1000_set_eee_i354"); + + if ((hw->phy.media_type != e1000_media_type_copper) || + ((phy->id != M88E1543_E_PHY_ID))) + goto out; + + if (!hw->dev_spec._82575.eee_disable) { + /* Switch to PHY page 18. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 18); + if (ret_val) + goto out; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1543_EEE_CTRL_1, + &phy_data); + if (ret_val) + goto out; + + phy_data |= E1000_M88E1543_EEE_CTRL_1_MS; + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_EEE_CTRL_1, + phy_data); + if (ret_val) + goto out; + + /* Return the PHY to page 0. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); + if (ret_val) + goto out; + + /* Turn on EEE advertisement. */ + ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + phy_data |= E1000_EEE_ADV_100_SUPPORTED | + E1000_EEE_ADV_1000_SUPPORTED; + ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + phy_data); + } else { + /* Turn off EEE advertisement. */ + ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED | + E1000_EEE_ADV_1000_SUPPORTED); + ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + phy_data); + } + +out: + return ret_val; +} + +/** + * e1000_get_eee_status_i354 - Get EEE status + * @hw: pointer to the HW structure + * @status: EEE status + * + * Get EEE status by guessing based on whether Tx or Rx LPI indications have + * been received. + **/ +s32 e1000_get_eee_status_i354(struct e1000_hw *hw, bool *status) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 phy_data; + + DEBUGFUNC("e1000_get_eee_status_i354"); + + /* Check if EEE is supported on this device. */ + if ((hw->phy.media_type != e1000_media_type_copper) || + ((phy->id != M88E1543_E_PHY_ID))) + goto out; + + ret_val = e1000_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354, + E1000_PCS_STATUS_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + *status = phy_data & (E1000_PCS_STATUS_TX_LPI_RCVD | + E1000_PCS_STATUS_RX_LPI_RCVD) ? true : false; + +out: + return ret_val; +} + +/* Due to a hw errata, if the host tries to configure the VFTA register + * while performing queries from the BMC or DMA, then the VFTA in some + * cases won't be written. + */ + +/** + * e1000_clear_vfta_i350 - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * Clears the register array which contains the VLAN filter table by + * setting all the values to 0. + **/ +void e1000_clear_vfta_i350(struct e1000_hw *hw) +{ + u32 offset; + int i; + + DEBUGFUNC("e1000_clear_vfta_350"); + + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + for (i = 0; i < 10; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); + + E1000_WRITE_FLUSH(hw); + } +} + +/** + * e1000_write_vfta_i350 - Write value to VLAN filter table + * @hw: pointer to the HW structure + * @offset: register offset in VLAN filter table + * @value: register value written to VLAN filter table + * + * Writes value at the given offset in the register array which stores + * the VLAN filter table. + **/ +void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value) +{ + int i; + + DEBUGFUNC("e1000_write_vfta_350"); + + for (i = 0; i < 10; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); + + E1000_WRITE_FLUSH(hw); +} + + +/** + * e1000_set_i2c_bb - Enable I2C bit-bang + * @hw: pointer to the HW structure + * + * Enable I2C bit-bang interface + * + **/ +s32 e1000_set_i2c_bb(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u32 ctrl_ext, i2cparams; + + DEBUGFUNC("e1000_set_i2c_bb"); + + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext |= E1000_CTRL_I2C_ENA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); + + i2cparams = E1000_READ_REG(hw, E1000_I2CPARAMS); + i2cparams |= E1000_I2CBB_EN; + i2cparams |= E1000_I2C_DATA_OE_N; + i2cparams |= E1000_I2C_CLK_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cparams); + E1000_WRITE_FLUSH(hw); + + return ret_val; +} + +/** + * e1000_read_i2c_byte_generic - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: device address + * @data: value read + * + * Performs byte read operation over I2C interface at + * a specified device address. + **/ +s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + s32 status = E1000_SUCCESS; + u32 max_retry = 10; + u32 retry = 1; + u16 swfw_mask = 0; + + bool nack = true; + + DEBUGFUNC("e1000_read_i2c_byte_generic"); + + swfw_mask = E1000_SWFW_PHY0_SM; + + do { + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) + != E1000_SUCCESS) { + status = E1000_ERR_SWFW_SYNC; + goto read_byte_out; + } + + e1000_i2c_start(hw); + + /* Device Address and write indication */ + status = e1000_clock_out_i2c_byte(hw, dev_addr); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_out_i2c_byte(hw, byte_offset); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + e1000_i2c_start(hw); + + /* Device Address and read indication */ + status = e1000_clock_out_i2c_byte(hw, (dev_addr | 0x1)); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_in_i2c_byte(hw, data); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_out_i2c_bit(hw, nack); + if (status != E1000_SUCCESS) + goto fail; + + e1000_i2c_stop(hw); + break; + +fail: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msec_delay(100); + e1000_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + DEBUGOUT("I2C byte read error - Retrying.\n"); + else + DEBUGOUT("I2C byte read error.\n"); + + } while (retry < max_retry); + + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + +read_byte_out: + + return status; +} + +/** + * e1000_write_i2c_byte_generic - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: value to write + * + * Performs byte write operation over I2C interface at + * a specified device address. + **/ +s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + s32 status = E1000_SUCCESS; + u32 max_retry = 1; + u32 retry = 0; + u16 swfw_mask = 0; + + DEBUGFUNC("e1000_write_i2c_byte_generic"); + + swfw_mask = E1000_SWFW_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) { + status = E1000_ERR_SWFW_SYNC; + goto write_byte_out; + } + + do { + e1000_i2c_start(hw); + + status = e1000_clock_out_i2c_byte(hw, dev_addr); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_out_i2c_byte(hw, byte_offset); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_out_i2c_byte(hw, data); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + e1000_i2c_stop(hw); + break; + +fail: + e1000_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + DEBUGOUT("I2C byte write error - Retrying.\n"); + else + DEBUGOUT("I2C byte write error.\n"); + } while (retry < max_retry); + + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + +write_byte_out: + + return status; +} + +/** + * e1000_i2c_start - Sets I2C start condition + * @hw: pointer to hardware structure + * + * Sets I2C start condition (High -> Low on SDA while SCL is High) + **/ +static void e1000_i2c_start(struct e1000_hw *hw) +{ + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + DEBUGFUNC("e1000_i2c_start"); + + /* Start condition must begin with data and clock high */ + e1000_set_i2c_data(hw, &i2cctl, 1); + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for start condition (4.7us) */ + usec_delay(E1000_I2C_T_SU_STA); + + e1000_set_i2c_data(hw, &i2cctl, 0); + + /* Hold time for start condition (4us) */ + usec_delay(E1000_I2C_T_HD_STA); + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + usec_delay(E1000_I2C_T_LOW); + +} + +/** + * e1000_i2c_stop - Sets I2C stop condition + * @hw: pointer to hardware structure + * + * Sets I2C stop condition (Low -> High on SDA while SCL is High) + **/ +static void e1000_i2c_stop(struct e1000_hw *hw) +{ + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + DEBUGFUNC("e1000_i2c_stop"); + + /* Stop condition must begin with data low and clock high */ + e1000_set_i2c_data(hw, &i2cctl, 0); + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for stop condition (4us) */ + usec_delay(E1000_I2C_T_SU_STO); + + e1000_set_i2c_data(hw, &i2cctl, 1); + + /* bus free time between stop and start (4.7us)*/ + usec_delay(E1000_I2C_T_BUF); +} + +/** + * e1000_clock_in_i2c_byte - Clocks in one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte to clock in + * + * Clocks in one byte data via I2C data/clock + **/ +static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data) +{ + s32 i; + bool bit = 0; + + DEBUGFUNC("e1000_clock_in_i2c_byte"); + + *data = 0; + for (i = 7; i >= 0; i--) { + e1000_clock_in_i2c_bit(hw, &bit); + *data |= bit << i; + } + + return E1000_SUCCESS; +} + +/** + * e1000_clock_out_i2c_byte - Clocks out one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte clocked out + * + * Clocks out one byte data via I2C data/clock + **/ +static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data) +{ + s32 status = E1000_SUCCESS; + s32 i; + u32 i2cctl; + bool bit = 0; + + DEBUGFUNC("e1000_clock_out_i2c_byte"); + + for (i = 7; i >= 0; i--) { + bit = (data >> i) & 0x1; + status = e1000_clock_out_i2c_bit(hw, bit); + + if (status != E1000_SUCCESS) + break; + } + + /* Release SDA line (set high) */ + i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + i2cctl |= E1000_I2C_DATA_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); + E1000_WRITE_FLUSH(hw); + + return status; +} + +/** + * e1000_get_i2c_ack - Polls for I2C ACK + * @hw: pointer to hardware structure + * + * Clocks in/out one bit via I2C data/clock + **/ +static s32 e1000_get_i2c_ack(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u32 i = 0; + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + u32 timeout = 10; + bool ack = true; + + DEBUGFUNC("e1000_get_i2c_ack"); + + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + usec_delay(E1000_I2C_T_HIGH); + + /* Wait until SCL returns high */ + for (i = 0; i < timeout; i++) { + usec_delay(1); + i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + if (i2cctl & E1000_I2C_CLK_IN) + break; + } + if (!(i2cctl & E1000_I2C_CLK_IN)) + return E1000_ERR_I2C; + + ack = e1000_get_i2c_data(&i2cctl); + if (ack) { + DEBUGOUT("I2C ack was not received.\n"); + status = E1000_ERR_I2C; + } + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + usec_delay(E1000_I2C_T_LOW); + + return status; +} + +/** + * e1000_clock_in_i2c_bit - Clocks in one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: read data value + * + * Clocks in one bit via I2C data/clock + **/ +static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data) +{ + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + DEBUGFUNC("e1000_clock_in_i2c_bit"); + + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + usec_delay(E1000_I2C_T_HIGH); + + i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + *data = e1000_get_i2c_data(&i2cctl); + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + usec_delay(E1000_I2C_T_LOW); + + return E1000_SUCCESS; +} + +/** + * e1000_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: data value to write + * + * Clocks out one bit via I2C data/clock + **/ +static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data) +{ + s32 status; + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + DEBUGFUNC("e1000_clock_out_i2c_bit"); + + status = e1000_set_i2c_data(hw, &i2cctl, data); + if (status == E1000_SUCCESS) { + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + usec_delay(E1000_I2C_T_HIGH); + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us. + * This also takes care of the data hold time. + */ + usec_delay(E1000_I2C_T_LOW); + } else { + status = E1000_ERR_I2C; + DEBUGOUT1("I2C data was not set to %X\n", data); + } + + return status; +} +/** + * e1000_raise_i2c_clk - Raises the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Raises the I2C clock line '0'->'1' + **/ +static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl) +{ + DEBUGFUNC("e1000_raise_i2c_clk"); + + *i2cctl |= E1000_I2C_CLK_OUT; + *i2cctl &= ~E1000_I2C_CLK_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); + E1000_WRITE_FLUSH(hw); + + /* SCL rise time (1000ns) */ + usec_delay(E1000_I2C_T_RISE); +} + +/** + * e1000_lower_i2c_clk - Lowers the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Lowers the I2C clock line '1'->'0' + **/ +static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl) +{ + + DEBUGFUNC("e1000_lower_i2c_clk"); + + *i2cctl &= ~E1000_I2C_CLK_OUT; + *i2cctl &= ~E1000_I2C_CLK_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); + E1000_WRITE_FLUSH(hw); + + /* SCL fall time (300ns) */ + usec_delay(E1000_I2C_T_FALL); +} + +/** + * e1000_set_i2c_data - Sets the I2C data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * @data: I2C data value (0 or 1) to set + * + * Sets the I2C data bit + **/ +static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data) +{ + s32 status = E1000_SUCCESS; + + DEBUGFUNC("e1000_set_i2c_data"); + + if (data) + *i2cctl |= E1000_I2C_DATA_OUT; + else + *i2cctl &= ~E1000_I2C_DATA_OUT; + + *i2cctl &= ~E1000_I2C_DATA_OE_N; + *i2cctl |= E1000_I2C_CLK_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); + E1000_WRITE_FLUSH(hw); + + /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ + usec_delay(E1000_I2C_T_RISE + E1000_I2C_T_FALL + E1000_I2C_T_SU_DATA); + + *i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + if (data != e1000_get_i2c_data(i2cctl)) { + status = E1000_ERR_I2C; + DEBUGOUT1("Error - I2C data was not set to %X.\n", data); + } + + return status; +} + +/** + * e1000_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Returns the I2C data bit value + **/ +static bool e1000_get_i2c_data(u32 *i2cctl) +{ + bool data; + + DEBUGFUNC("e1000_get_i2c_data"); + + if (*i2cctl & E1000_I2C_DATA_IN) + data = 1; + else + data = 0; + + return data; +} + +/** + * e1000_i2c_bus_clear - Clears the I2C bus + * @hw: pointer to hardware structure + * + * Clears the I2C bus by sending nine clock pulses. + * Used when data line is stuck low. + **/ +void e1000_i2c_bus_clear(struct e1000_hw *hw) +{ + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + u32 i; + + DEBUGFUNC("e1000_i2c_bus_clear"); + + e1000_i2c_start(hw); + + e1000_set_i2c_data(hw, &i2cctl, 1); + + for (i = 0; i < 9; i++) { + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Min high period of clock is 4us */ + usec_delay(E1000_I2C_T_HIGH); + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Min low period of clock is 4.7us*/ + usec_delay(E1000_I2C_T_LOW); + } + + e1000_i2c_start(hw); + + /* Put the i2c bus back to default state */ + e1000_i2c_stop(hw); +} + +static const u8 e1000_emc_temp_data[4] = { + E1000_EMC_INTERNAL_DATA, + E1000_EMC_DIODE1_DATA, + E1000_EMC_DIODE2_DATA, + E1000_EMC_DIODE3_DATA +}; +static const u8 e1000_emc_therm_limit[4] = { + E1000_EMC_INTERNAL_THERM_LIMIT, + E1000_EMC_DIODE1_THERM_LIMIT, + E1000_EMC_DIODE2_THERM_LIMIT, + E1000_EMC_DIODE3_THERM_LIMIT +}; + +/** + * e1000_get_thermal_sensor_data_generic - Gathers thermal sensor data + * @hw: pointer to hardware structure + * + * Updates the temperatures in mac.thermal_sensor_data + **/ +s32 e1000_get_thermal_sensor_data_generic(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + DEBUGFUNC("e1000_get_thermal_sensor_data_generic"); + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + data->sensor[0].temp = (E1000_READ_REG(hw, E1000_THMJT) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return status; + + e1000_read_nvm(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + if (num_sensors > E1000_MAX_SENSORS) + num_sensors = E1000_MAX_SENSORS; + + for (i = 1; i < num_sensors; i++) { + e1000_read_nvm(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + + if (sensor_location != 0) + hw->phy.ops.read_i2c_byte(hw, + e1000_emc_temp_data[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + &data->sensor[i].temp); + } + return status; +} + +/** + * e1000_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Sets the thermal sensor thresholds according to the NVM map + * and save off the threshold and location values into mac.thermal_sensor_data + **/ +s32 e1000_init_thermal_sensor_thresh_generic(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 low_thresh_delta; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 therm_limit; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + DEBUGFUNC("e1000_init_thermal_sensor_thresh_generic"); + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + memset(data, 0, sizeof(struct e1000_thermal_sensor_data)); + + data->sensor[0].location = 0x1; + data->sensor[0].caution_thresh = + (E1000_READ_REG(hw, E1000_THHIGHTC) & 0xFF); + data->sensor[0].max_op_thresh = + (E1000_READ_REG(hw, E1000_THLOWTC) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return status; + + e1000_read_nvm(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >> + NVM_ETS_LTHRES_DELTA_SHIFT); + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + + for (i = 1; i <= num_sensors; i++) { + e1000_read_nvm(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK; + + hw->phy.ops.write_i2c_byte(hw, + e1000_emc_therm_limit[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + therm_limit); + + if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) { + data->sensor[i].location = sensor_location; + data->sensor[i].caution_thresh = therm_limit; + data->sensor[i].max_op_thresh = therm_limit - + low_thresh_delta; + } + } + return status; +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_82575.h b/kernel/linux/kni/ethtool/igb/e1000_82575.h new file mode 100644 index 00000000..2e0dbb2f --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_82575.h @@ -0,0 +1,494 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_82575_H_ +#define _E1000_82575_H_ + +#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_DEF1_DEF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_OFF1_ON2)) +/* + * Receive Address Register Count + * Number of high/low register pairs in the RAR. The RAR (Receive Address + * Registers) holds the directed and multicast addresses that we monitor. + * These entries are also used for MAC-based filtering. + */ +/* + * For 82576, there are an additional set of RARs that begin at an offset + * separate from the first set of RARs. + */ +#define E1000_RAR_ENTRIES_82575 16 +#define E1000_RAR_ENTRIES_82576 24 +#define E1000_RAR_ENTRIES_82580 24 +#define E1000_RAR_ENTRIES_I350 32 +#define E1000_SW_SYNCH_MB 0x00000100 +#define E1000_STAT_DEV_RST_SET 0x00100000 +#define E1000_CTRL_DEV_RST 0x20000000 + +struct e1000_adv_data_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + union { + u32 data; + struct { + u32 datalen:16; /* Data buffer length */ + u32 rsvd:4; + u32 dtyp:4; /* Descriptor type */ + u32 dcmd:8; /* Descriptor command */ + } config; + } lower; + union { + u32 data; + struct { + u32 status:4; /* Descriptor status */ + u32 idx:4; + u32 popts:6; /* Packet Options */ + u32 paylen:18; /* Payload length */ + } options; + } upper; +}; + +#define E1000_TXD_DTYP_ADV_C 0x2 /* Advanced Context Descriptor */ +#define E1000_TXD_DTYP_ADV_D 0x3 /* Advanced Data Descriptor */ +#define E1000_ADV_TXD_CMD_DEXT 0x20 /* Descriptor extension (0 = legacy) */ +#define E1000_ADV_TUCMD_IPV4 0x2 /* IP Packet Type: 1=IPv4 */ +#define E1000_ADV_TUCMD_IPV6 0x0 /* IP Packet Type: 0=IPv6 */ +#define E1000_ADV_TUCMD_L4T_UDP 0x0 /* L4 Packet TYPE of UDP */ +#define E1000_ADV_TUCMD_L4T_TCP 0x4 /* L4 Packet TYPE of TCP */ +#define E1000_ADV_TUCMD_MKRREQ 0x10 /* Indicates markers are required */ +#define E1000_ADV_DCMD_EOP 0x1 /* End of Packet */ +#define E1000_ADV_DCMD_IFCS 0x2 /* Insert FCS (Ethernet CRC) */ +#define E1000_ADV_DCMD_RS 0x8 /* Report Status */ +#define E1000_ADV_DCMD_VLE 0x40 /* Add VLAN tag */ +#define E1000_ADV_DCMD_TSE 0x80 /* TCP Seg enable */ +/* Extended Device Control */ +#define E1000_CTRL_EXT_NSICR 0x00000001 /* Disable Intr Clear all on read */ + +struct e1000_adv_context_desc { + union { + u32 ip_config; + struct { + u32 iplen:9; + u32 maclen:7; + u32 vlan_tag:16; + } fields; + } ip_setup; + u32 seq_num; + union { + u64 l4_config; + struct { + u32 mkrloc:9; + u32 tucmd:11; + u32 dtyp:4; + u32 adv:8; + u32 rsvd:4; + u32 idx:4; + u32 l4len:8; + u32 mss:16; + } fields; + } l4_setup; +}; + +/* SRRCTL bit definitions */ +#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ +#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00 +#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */ +#define E1000_SRRCTL_DESCTYPE_LEGACY 0x00000000 +#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 +#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION 0x06000000 +#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000 +#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000 +#define E1000_SRRCTL_TIMESTAMP 0x40000000 +#define E1000_SRRCTL_DROP_EN 0x80000000 + +#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F +#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00 + +#define E1000_TX_HEAD_WB_ENABLE 0x1 +#define E1000_TX_SEQNUM_WB_ENABLE 0x2 + +#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002 +#define E1000_MRQC_ENABLE_VMDQ 0x00000003 +#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005 +#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000 +#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000 +#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000 +#define E1000_MRQC_ENABLE_RSS_8Q 0x00000002 + +#define E1000_VMRCTL_MIRROR_PORT_SHIFT 8 +#define E1000_VMRCTL_MIRROR_DSTPORT_MASK (7 << \ + E1000_VMRCTL_MIRROR_PORT_SHIFT) +#define E1000_VMRCTL_POOL_MIRROR_ENABLE (1 << 0) +#define E1000_VMRCTL_UPLINK_MIRROR_ENABLE (1 << 1) +#define E1000_VMRCTL_DOWNLINK_MIRROR_ENABLE (1 << 2) + +#define E1000_EICR_TX_QUEUE ( \ + E1000_EICR_TX_QUEUE0 | \ + E1000_EICR_TX_QUEUE1 | \ + E1000_EICR_TX_QUEUE2 | \ + E1000_EICR_TX_QUEUE3) + +#define E1000_EICR_RX_QUEUE ( \ + E1000_EICR_RX_QUEUE0 | \ + E1000_EICR_RX_QUEUE1 | \ + E1000_EICR_RX_QUEUE2 | \ + E1000_EICR_RX_QUEUE3) + +#define E1000_EIMS_RX_QUEUE E1000_EICR_RX_QUEUE +#define E1000_EIMS_TX_QUEUE E1000_EICR_TX_QUEUE + +#define EIMS_ENABLE_MASK ( \ + E1000_EIMS_RX_QUEUE | \ + E1000_EIMS_TX_QUEUE | \ + E1000_EIMS_TCP_TIMER | \ + E1000_EIMS_OTHER) + +/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */ +#define E1000_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */ +#define E1000_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */ +#define E1000_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */ +#define E1000_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */ +#define E1000_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */ +#define E1000_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */ +#define E1000_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */ +#define E1000_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */ +#define E1000_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */ +#define E1000_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of ctrl bits */ + +/* Receive Descriptor - Advanced */ +union e1000_adv_rx_desc { + struct { + __le64 pkt_addr; /* Packet buffer address */ + __le64 hdr_addr; /* Header buffer address */ + } read; + struct { + struct { + union { + __le32 data; + struct { + __le16 pkt_info; /*RSS type, Pkt type*/ + /* Split Header, header buffer len */ + __le16 hdr_info; + } hs_rss; + } lo_dword; + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length; /* Packet length */ + __le16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define E1000_RXDADV_RSSTYPE_MASK 0x0000000F +#define E1000_RXDADV_RSSTYPE_SHIFT 12 +#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0 +#define E1000_RXDADV_HDRBUFLEN_SHIFT 5 +#define E1000_RXDADV_SPLITHEADER_EN 0x00001000 +#define E1000_RXDADV_SPH 0x8000 +#define E1000_RXDADV_STAT_TS 0x10000 /* Pkt was time stamped */ +#define E1000_RXDADV_STAT_TSIP 0x08000 /* timestamp in packet */ +#define E1000_RXDADV_ERR_HBO 0x00800000 + +/* RSS Hash results */ +#define E1000_RXDADV_RSSTYPE_NONE 0x00000000 +#define E1000_RXDADV_RSSTYPE_IPV4_TCP 0x00000001 +#define E1000_RXDADV_RSSTYPE_IPV4 0x00000002 +#define E1000_RXDADV_RSSTYPE_IPV6_TCP 0x00000003 +#define E1000_RXDADV_RSSTYPE_IPV6_EX 0x00000004 +#define E1000_RXDADV_RSSTYPE_IPV6 0x00000005 +#define E1000_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006 +#define E1000_RXDADV_RSSTYPE_IPV4_UDP 0x00000007 +#define E1000_RXDADV_RSSTYPE_IPV6_UDP 0x00000008 +#define E1000_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009 + +/* RSS Packet Types as indicated in the receive descriptor */ +#define E1000_RXDADV_PKTTYPE_NONE 0x00000000 +#define E1000_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPV4 hdr present */ +#define E1000_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPV4 hdr + extensions */ +#define E1000_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPV6 hdr present */ +#define E1000_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPV6 hdr + extensions */ +#define E1000_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */ +#define E1000_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */ +#define E1000_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */ +#define E1000_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */ + +#define E1000_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */ +#define E1000_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */ +#define E1000_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */ +#define E1000_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */ +#define E1000_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */ +#define E1000_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */ + +/* LinkSec results */ +/* Security Processing bit Indication */ +#define E1000_RXDADV_LNKSEC_STATUS_SECP 0x00020000 +#define E1000_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000 +#define E1000_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000 +#define E1000_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000 +#define E1000_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000 + +#define E1000_RXDADV_IPSEC_STATUS_SECP 0x00020000 +#define E1000_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000 +#define E1000_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000 +#define E1000_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000 +#define E1000_RXDADV_IPSEC_ERROR_AUTHENTICATION_FAILED 0x18000000 + +/* Transmit Descriptor - Advanced */ +union e1000_adv_tx_desc { + struct { + __le64 buffer_addr; /* Address of descriptor's data buf */ + __le32 cmd_type_len; + __le32 olinfo_status; + } read; + struct { + __le64 rsvd; /* Reserved */ + __le32 nxtseq_seed; + __le32 status; + } wb; +}; + +/* Adv Transmit Descriptor Config Masks */ +#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */ +#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ +#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */ +#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */ +#define E1000_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */ +#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */ +#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */ +#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ +#define E1000_ADVTXD_MAC_LINKSEC 0x00040000 /* Apply LinkSec on pkt */ +#define E1000_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 Timestamp pkt */ +#define E1000_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED prsnt in WB */ +#define E1000_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */ +#define E1000_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */ +#define E1000_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */ +#define E1000_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */ +/* 1st & Last TSO-full iSCSI PDU*/ +#define E1000_ADVTXD_POPTS_ISCO_FULL 0x00001800 +#define E1000_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */ +#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ + +/* Context descriptors */ +struct e1000_adv_tx_context_desc { + __le32 vlan_macip_lens; + __le32 seqnum_seed; + __le32 type_tucmd_mlhl; + __le32 mss_l4len_idx; +}; + +#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ +#define E1000_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */ +#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ +#define E1000_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */ +#define E1000_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */ +#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ +#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */ +#define E1000_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */ +/* IPSec Encrypt Enable for ESP */ +#define E1000_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000 +/* Req requires Markers and CRC */ +#define E1000_ADVTXD_TUCMD_MKRREQ 0x00002000 +#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ +#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ +/* Adv ctxt IPSec SA IDX mask */ +#define E1000_ADVTXD_IPSEC_SA_INDEX_MASK 0x000000FF +/* Adv ctxt IPSec ESP len mask */ +#define E1000_ADVTXD_IPSEC_ESP_LEN_MASK 0x000000FF + +/* Additional Transmit Descriptor Control definitions */ +#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Tx Queue */ +#define E1000_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. wbk flushing */ +/* Tx Queue Arbitration Priority 0=low, 1=high */ +#define E1000_TXDCTL_PRIORITY 0x08000000 + +/* Additional Receive Descriptor Control definitions */ +#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Rx Queue */ +#define E1000_RXDCTL_SWFLSH 0x04000000 /* Rx Desc. wbk flushing */ + +/* Direct Cache Access (DCA) definitions */ +#define E1000_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */ +#define E1000_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */ + +#define E1000_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */ +#define E1000_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */ + +#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */ +#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ +#define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header ena */ +#define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload ena */ +#define E1000_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx Desc Relax Order */ + +#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ +#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ +#define E1000_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */ +#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ +#define E1000_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */ + +#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */ +#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */ +#define E1000_DCA_TXCTRL_CPUID_SHIFT_82576 24 /* Tx CPUID */ +#define E1000_DCA_RXCTRL_CPUID_SHIFT_82576 24 /* Rx CPUID */ + +/* Additional interrupt register bit definitions */ +#define E1000_ICR_LSECPNS 0x00000020 /* PN threshold - server */ +#define E1000_IMS_LSECPNS E1000_ICR_LSECPNS /* PN threshold - server */ +#define E1000_ICS_LSECPNS E1000_ICR_LSECPNS /* PN threshold - server */ + +/* ETQF register bit definitions */ +#define E1000_ETQF_FILTER_ENABLE (1 << 26) +#define E1000_ETQF_IMM_INT (1 << 29) +#define E1000_ETQF_1588 (1 << 30) +#define E1000_ETQF_QUEUE_ENABLE (1 << 31) +/* + * ETQF filter list: one static filter per filter consumer. This is + * to avoid filter collisions later. Add new filters + * here!! + * + * Current filters: + * EAPOL 802.1x (0x888e): Filter 0 + */ +#define E1000_ETQF_FILTER_EAPOL 0 + +#define E1000_FTQF_VF_BP 0x00008000 +#define E1000_FTQF_1588_TIME_STAMP 0x08000000 +#define E1000_FTQF_MASK 0xF0000000 +#define E1000_FTQF_MASK_PROTO_BP 0x10000000 +#define E1000_FTQF_MASK_SOURCE_ADDR_BP 0x20000000 +#define E1000_FTQF_MASK_DEST_ADDR_BP 0x40000000 +#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000 + +#define E1000_NVM_APME_82575 0x0400 +#define MAX_NUM_VFS 7 + +#define E1000_DTXSWC_MAC_SPOOF_MASK 0x000000FF /* Per VF MAC spoof cntrl */ +#define E1000_DTXSWC_VLAN_SPOOF_MASK 0x0000FF00 /* Per VF VLAN spoof cntrl */ +#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */ +#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8 +#define E1000_DTXSWC_LLE_SHIFT 16 +#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */ + +/* Easy defines for setting default pool, would normally be left a zero */ +#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7 +#define E1000_VT_CTL_DEFAULT_POOL_MASK (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT) + +/* Other useful VMD_CTL register defines */ +#define E1000_VT_CTL_IGNORE_MAC (1 << 28) +#define E1000_VT_CTL_DISABLE_DEF_POOL (1 << 29) +#define E1000_VT_CTL_VM_REPL_EN (1 << 30) + +/* Per VM Offload register setup */ +#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */ +#define E1000_VMOLR_LPE 0x00010000 /* Accept Long packet */ +#define E1000_VMOLR_RSSE 0x00020000 /* Enable RSS */ +#define E1000_VMOLR_AUPE 0x01000000 /* Accept untagged packets */ +#define E1000_VMOLR_ROMPE 0x02000000 /* Accept overflow multicast */ +#define E1000_VMOLR_ROPE 0x04000000 /* Accept overflow unicast */ +#define E1000_VMOLR_BAM 0x08000000 /* Accept Broadcast packets */ +#define E1000_VMOLR_MPME 0x10000000 /* Multicast promiscuous mode */ +#define E1000_VMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */ +#define E1000_VMOLR_STRCRC 0x80000000 /* CRC stripping enable */ + +#define E1000_VMOLR_VPE 0x00800000 /* VLAN promiscuous enable */ +#define E1000_VMOLR_UPE 0x20000000 /* Unicast promisuous enable */ +#define E1000_DVMOLR_HIDVLAN 0x20000000 /* Vlan hiding enable */ +#define E1000_DVMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */ +#define E1000_DVMOLR_STRCRC 0x80000000 /* CRC stripping enable */ + +#define E1000_PBRWAC_WALPB 0x00000007 /* Wrap around event on LAN Rx PB */ +#define E1000_PBRWAC_PBE 0x00000008 /* Rx packet buffer empty */ + +#define E1000_VLVF_ARRAY_SIZE 32 +#define E1000_VLVF_VLANID_MASK 0x00000FFF +#define E1000_VLVF_POOLSEL_SHIFT 12 +#define E1000_VLVF_POOLSEL_MASK (0xFF << E1000_VLVF_POOLSEL_SHIFT) +#define E1000_VLVF_LVLAN 0x00100000 +#define E1000_VLVF_VLANID_ENABLE 0x80000000 + +#define E1000_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */ +#define E1000_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */ + +#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */ + +#define E1000_IOVCTL 0x05BBC +#define E1000_IOVCTL_REUSE_VFQ 0x00000001 + +#define E1000_RPLOLR_STRVLAN 0x40000000 +#define E1000_RPLOLR_STRCRC 0x80000000 + +#define E1000_TCTL_EXT_COLD 0x000FFC00 +#define E1000_TCTL_EXT_COLD_SHIFT 10 + +#define E1000_DTXCTL_8023LL 0x0004 +#define E1000_DTXCTL_VLAN_ADDED 0x0008 +#define E1000_DTXCTL_OOS_ENABLE 0x0010 +#define E1000_DTXCTL_MDP_EN 0x0020 +#define E1000_DTXCTL_SPOOF_INT 0x0040 + +#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT (1 << 14) + +#define ALL_QUEUES 0xFFFF + +/* Rx packet buffer size defines */ +#define E1000_RXPBS_SIZE_MASK_82576 0x0000007F +void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable); +void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf); +void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable); +s32 e1000_init_nvm_params_82575(struct e1000_hw *hw); + +u16 e1000_rxpbs_adjust_82580(u32 data); +s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data); +s32 e1000_set_eee_i350(struct e1000_hw *); +s32 e1000_set_eee_i354(struct e1000_hw *); +s32 e1000_get_eee_status_i354(struct e1000_hw *, bool *); +#define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8 +#define E1000_EMC_INTERNAL_DATA 0x00 +#define E1000_EMC_INTERNAL_THERM_LIMIT 0x20 +#define E1000_EMC_DIODE1_DATA 0x01 +#define E1000_EMC_DIODE1_THERM_LIMIT 0x19 +#define E1000_EMC_DIODE2_DATA 0x23 +#define E1000_EMC_DIODE2_THERM_LIMIT 0x1A +#define E1000_EMC_DIODE3_DATA 0x2A +#define E1000_EMC_DIODE3_THERM_LIMIT 0x30 + +s32 e1000_get_thermal_sensor_data_generic(struct e1000_hw *hw); +s32 e1000_init_thermal_sensor_thresh_generic(struct e1000_hw *hw); + +/* I2C SDA and SCL timing parameters for standard mode */ +#define E1000_I2C_T_HD_STA 4 +#define E1000_I2C_T_LOW 5 +#define E1000_I2C_T_HIGH 4 +#define E1000_I2C_T_SU_STA 5 +#define E1000_I2C_T_HD_DATA 5 +#define E1000_I2C_T_SU_DATA 1 +#define E1000_I2C_T_RISE 1 +#define E1000_I2C_T_FALL 1 +#define E1000_I2C_T_SU_STO 4 +#define E1000_I2C_T_BUF 5 + +s32 e1000_set_i2c_bb(struct e1000_hw *hw); +s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); +void e1000_i2c_bus_clear(struct e1000_hw *hw); +#endif /* _E1000_82575_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_api.c b/kernel/linux/kni/ethtool/igb/e1000_api.c new file mode 100644 index 00000000..3e54e50e --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_api.c @@ -0,0 +1,1144 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_api.h" + +/** + * e1000_init_mac_params - Initialize MAC function pointers + * @hw: pointer to the HW structure + * + * This function initializes the function pointers for the MAC + * set of functions. Called by drivers or by e1000_setup_init_funcs. + **/ +s32 e1000_init_mac_params(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + if (hw->mac.ops.init_params) { + ret_val = hw->mac.ops.init_params(hw); + if (ret_val) { + DEBUGOUT("MAC Initialization Error\n"); + goto out; + } + } else { + DEBUGOUT("mac.init_mac_params was NULL\n"); + ret_val = -E1000_ERR_CONFIG; + } + +out: + return ret_val; +} + +/** + * e1000_init_nvm_params - Initialize NVM function pointers + * @hw: pointer to the HW structure + * + * This function initializes the function pointers for the NVM + * set of functions. Called by drivers or by e1000_setup_init_funcs. + **/ +s32 e1000_init_nvm_params(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + if (hw->nvm.ops.init_params) { + ret_val = hw->nvm.ops.init_params(hw); + if (ret_val) { + DEBUGOUT("NVM Initialization Error\n"); + goto out; + } + } else { + DEBUGOUT("nvm.init_nvm_params was NULL\n"); + ret_val = -E1000_ERR_CONFIG; + } + +out: + return ret_val; +} + +/** + * e1000_init_phy_params - Initialize PHY function pointers + * @hw: pointer to the HW structure + * + * This function initializes the function pointers for the PHY + * set of functions. Called by drivers or by e1000_setup_init_funcs. + **/ +s32 e1000_init_phy_params(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + if (hw->phy.ops.init_params) { + ret_val = hw->phy.ops.init_params(hw); + if (ret_val) { + DEBUGOUT("PHY Initialization Error\n"); + goto out; + } + } else { + DEBUGOUT("phy.init_phy_params was NULL\n"); + ret_val = -E1000_ERR_CONFIG; + } + +out: + return ret_val; +} + +/** + * e1000_init_mbx_params - Initialize mailbox function pointers + * @hw: pointer to the HW structure + * + * This function initializes the function pointers for the PHY + * set of functions. Called by drivers or by e1000_setup_init_funcs. + **/ +s32 e1000_init_mbx_params(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + if (hw->mbx.ops.init_params) { + ret_val = hw->mbx.ops.init_params(hw); + if (ret_val) { + DEBUGOUT("Mailbox Initialization Error\n"); + goto out; + } + } else { + DEBUGOUT("mbx.init_mbx_params was NULL\n"); + ret_val = -E1000_ERR_CONFIG; + } + +out: + return ret_val; +} + +/** + * e1000_set_mac_type - Sets MAC type + * @hw: pointer to the HW structure + * + * This function sets the mac type of the adapter based on the + * device ID stored in the hw structure. + * MUST BE FIRST FUNCTION CALLED (explicitly or through + * e1000_setup_init_funcs()). + **/ +s32 e1000_set_mac_type(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_set_mac_type"); + + switch (hw->device_id) { + case E1000_DEV_ID_82575EB_COPPER: + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82575GB_QUAD_COPPER: + mac->type = e1000_82575; + break; + case E1000_DEV_ID_82576: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: + case E1000_DEV_ID_82576_QUAD_COPPER: + case E1000_DEV_ID_82576_QUAD_COPPER_ET2: + case E1000_DEV_ID_82576_NS: + case E1000_DEV_ID_82576_NS_SERDES: + case E1000_DEV_ID_82576_SERDES_QUAD: + mac->type = e1000_82576; + break; + case E1000_DEV_ID_82580_COPPER: + case E1000_DEV_ID_82580_FIBER: + case E1000_DEV_ID_82580_SERDES: + case E1000_DEV_ID_82580_SGMII: + case E1000_DEV_ID_82580_COPPER_DUAL: + case E1000_DEV_ID_82580_QUAD_FIBER: + case E1000_DEV_ID_DH89XXCC_SGMII: + case E1000_DEV_ID_DH89XXCC_SERDES: + case E1000_DEV_ID_DH89XXCC_BACKPLANE: + case E1000_DEV_ID_DH89XXCC_SFP: + mac->type = e1000_82580; + break; + case E1000_DEV_ID_I350_COPPER: + case E1000_DEV_ID_I350_FIBER: + case E1000_DEV_ID_I350_SERDES: + case E1000_DEV_ID_I350_SGMII: + case E1000_DEV_ID_I350_DA4: + mac->type = e1000_i350; + break; + case E1000_DEV_ID_I210_COPPER_FLASHLESS: + case E1000_DEV_ID_I210_SERDES_FLASHLESS: + case E1000_DEV_ID_I210_COPPER: + case E1000_DEV_ID_I210_COPPER_OEM1: + case E1000_DEV_ID_I210_COPPER_IT: + case E1000_DEV_ID_I210_FIBER: + case E1000_DEV_ID_I210_SERDES: + case E1000_DEV_ID_I210_SGMII: + mac->type = e1000_i210; + break; + case E1000_DEV_ID_I211_COPPER: + mac->type = e1000_i211; + break; + + case E1000_DEV_ID_I354_BACKPLANE_1GBPS: + case E1000_DEV_ID_I354_SGMII: + case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS: + mac->type = e1000_i354; + break; + default: + /* Should never have loaded on this device */ + ret_val = -E1000_ERR_MAC_INIT; + break; + } + + return ret_val; +} + +/** + * e1000_setup_init_funcs - Initializes function pointers + * @hw: pointer to the HW structure + * @init_device: true will initialize the rest of the function pointers + * getting the device ready for use. false will only set + * MAC type and the function pointers for the other init + * functions. Passing false will not generate any hardware + * reads or writes. + * + * This function must be called by a driver in order to use the rest + * of the 'shared' code files. Called by drivers only. + **/ +s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device) +{ + s32 ret_val; + + /* Can't do much good without knowing the MAC type. */ + ret_val = e1000_set_mac_type(hw); + if (ret_val) { + DEBUGOUT("ERROR: MAC type could not be set properly.\n"); + goto out; + } + + if (!hw->hw_addr) { + DEBUGOUT("ERROR: Registers not mapped\n"); + ret_val = -E1000_ERR_CONFIG; + goto out; + } + + /* + * Init function pointers to generic implementations. We do this first + * allowing a driver module to override it afterward. + */ + e1000_init_mac_ops_generic(hw); + e1000_init_phy_ops_generic(hw); + e1000_init_nvm_ops_generic(hw); + e1000_init_mbx_ops_generic(hw); + + /* + * Set up the init function pointers. These are functions within the + * adapter family file that sets up function pointers for the rest of + * the functions in that family. + */ + switch (hw->mac.type) { + case e1000_82575: + case e1000_82576: + case e1000_82580: + case e1000_i350: + case e1000_i354: + e1000_init_function_pointers_82575(hw); + break; + case e1000_i210: + case e1000_i211: + e1000_init_function_pointers_i210(hw); + break; + default: + DEBUGOUT("Hardware not supported\n"); + ret_val = -E1000_ERR_CONFIG; + break; + } + + /* + * Initialize the rest of the function pointers. These require some + * register reads/writes in some cases. + */ + if (!(ret_val) && init_device) { + ret_val = e1000_init_mac_params(hw); + if (ret_val) + goto out; + + ret_val = e1000_init_nvm_params(hw); + if (ret_val) + goto out; + + ret_val = e1000_init_phy_params(hw); + if (ret_val) + goto out; + + ret_val = e1000_init_mbx_params(hw); + if (ret_val) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_get_bus_info - Obtain bus information for adapter + * @hw: pointer to the HW structure + * + * This will obtain information about the HW bus for which the + * adapter is attached and stores it in the hw structure. This is a + * function pointer entry point called by drivers. + **/ +s32 e1000_get_bus_info(struct e1000_hw *hw) +{ + if (hw->mac.ops.get_bus_info) + return hw->mac.ops.get_bus_info(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_clear_vfta - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * This clears the VLAN filter table on the adapter. This is a function + * pointer entry point called by drivers. + **/ +void e1000_clear_vfta(struct e1000_hw *hw) +{ + if (hw->mac.ops.clear_vfta) + hw->mac.ops.clear_vfta(hw); +} + +/** + * e1000_write_vfta - Write value to VLAN filter table + * @hw: pointer to the HW structure + * @offset: the 32-bit offset in which to write the value to. + * @value: the 32-bit value to write at location offset. + * + * This writes a 32-bit value to a 32-bit offset in the VLAN filter + * table. This is a function pointer entry point called by drivers. + **/ +void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) +{ + if (hw->mac.ops.write_vfta) + hw->mac.ops.write_vfta(hw, offset, value); +} + +/** + * e1000_update_mc_addr_list - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * + * Updates the Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + **/ +void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count) +{ + if (hw->mac.ops.update_mc_addr_list) + hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, + mc_addr_count); +} + +/** + * e1000_force_mac_fc - Force MAC flow control + * @hw: pointer to the HW structure + * + * Force the MAC's flow control settings. Currently no func pointer exists + * and all implementations are handled in the generic version of this + * function. + **/ +s32 e1000_force_mac_fc(struct e1000_hw *hw) +{ + return e1000_force_mac_fc_generic(hw); +} + +/** + * e1000_check_for_link - Check/Store link connection + * @hw: pointer to the HW structure + * + * This checks the link condition of the adapter and stores the + * results in the hw->mac structure. This is a function pointer entry + * point called by drivers. + **/ +s32 e1000_check_for_link(struct e1000_hw *hw) +{ + if (hw->mac.ops.check_for_link) + return hw->mac.ops.check_for_link(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_check_mng_mode - Check management mode + * @hw: pointer to the HW structure + * + * This checks if the adapter has manageability enabled. + * This is a function pointer entry point called by drivers. + **/ +bool e1000_check_mng_mode(struct e1000_hw *hw) +{ + if (hw->mac.ops.check_mng_mode) + return hw->mac.ops.check_mng_mode(hw); + + return false; +} + +/** + * e1000_mng_write_dhcp_info - Writes DHCP info to host interface + * @hw: pointer to the HW structure + * @buffer: pointer to the host interface + * @length: size of the buffer + * + * Writes the DHCP information to the host interface. + **/ +s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) +{ + return e1000_mng_write_dhcp_info_generic(hw, buffer, length); +} + +/** + * e1000_reset_hw - Reset hardware + * @hw: pointer to the HW structure + * + * This resets the hardware into a known state. This is a function pointer + * entry point called by drivers. + **/ +s32 e1000_reset_hw(struct e1000_hw *hw) +{ + if (hw->mac.ops.reset_hw) + return hw->mac.ops.reset_hw(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_init_hw - Initialize hardware + * @hw: pointer to the HW structure + * + * This inits the hardware readying it for operation. This is a function + * pointer entry point called by drivers. + **/ +s32 e1000_init_hw(struct e1000_hw *hw) +{ + if (hw->mac.ops.init_hw) + return hw->mac.ops.init_hw(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_setup_link - Configures link and flow control + * @hw: pointer to the HW structure + * + * This configures link and flow control settings for the adapter. This + * is a function pointer entry point called by drivers. While modules can + * also call this, they probably call their own version of this function. + **/ +s32 e1000_setup_link(struct e1000_hw *hw) +{ + if (hw->mac.ops.setup_link) + return hw->mac.ops.setup_link(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_get_speed_and_duplex - Returns current speed and duplex + * @hw: pointer to the HW structure + * @speed: pointer to a 16-bit value to store the speed + * @duplex: pointer to a 16-bit value to store the duplex. + * + * This returns the speed and duplex of the adapter in the two 'out' + * variables passed in. This is a function pointer entry point called + * by drivers. + **/ +s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) +{ + if (hw->mac.ops.get_link_up_info) + return hw->mac.ops.get_link_up_info(hw, speed, duplex); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_setup_led - Configures SW controllable LED + * @hw: pointer to the HW structure + * + * This prepares the SW controllable LED for use and saves the current state + * of the LED so it can be later restored. This is a function pointer entry + * point called by drivers. + **/ +s32 e1000_setup_led(struct e1000_hw *hw) +{ + if (hw->mac.ops.setup_led) + return hw->mac.ops.setup_led(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_cleanup_led - Restores SW controllable LED + * @hw: pointer to the HW structure + * + * This restores the SW controllable LED to the value saved off by + * e1000_setup_led. This is a function pointer entry point called by drivers. + **/ +s32 e1000_cleanup_led(struct e1000_hw *hw) +{ + if (hw->mac.ops.cleanup_led) + return hw->mac.ops.cleanup_led(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_blink_led - Blink SW controllable LED + * @hw: pointer to the HW structure + * + * This starts the adapter LED blinking. Request the LED to be setup first + * and cleaned up after. This is a function pointer entry point called by + * drivers. + **/ +s32 e1000_blink_led(struct e1000_hw *hw) +{ + if (hw->mac.ops.blink_led) + return hw->mac.ops.blink_led(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_id_led_init - store LED configurations in SW + * @hw: pointer to the HW structure + * + * Initializes the LED config in SW. This is a function pointer entry point + * called by drivers. + **/ +s32 e1000_id_led_init(struct e1000_hw *hw) +{ + if (hw->mac.ops.id_led_init) + return hw->mac.ops.id_led_init(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_led_on - Turn on SW controllable LED + * @hw: pointer to the HW structure + * + * Turns the SW defined LED on. This is a function pointer entry point + * called by drivers. + **/ +s32 e1000_led_on(struct e1000_hw *hw) +{ + if (hw->mac.ops.led_on) + return hw->mac.ops.led_on(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_led_off - Turn off SW controllable LED + * @hw: pointer to the HW structure + * + * Turns the SW defined LED off. This is a function pointer entry point + * called by drivers. + **/ +s32 e1000_led_off(struct e1000_hw *hw) +{ + if (hw->mac.ops.led_off) + return hw->mac.ops.led_off(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_reset_adaptive - Reset adaptive IFS + * @hw: pointer to the HW structure + * + * Resets the adaptive IFS. Currently no func pointer exists and all + * implementations are handled in the generic version of this function. + **/ +void e1000_reset_adaptive(struct e1000_hw *hw) +{ + e1000_reset_adaptive_generic(hw); +} + +/** + * e1000_update_adaptive - Update adaptive IFS + * @hw: pointer to the HW structure + * + * Updates adapter IFS. Currently no func pointer exists and all + * implementations are handled in the generic version of this function. + **/ +void e1000_update_adaptive(struct e1000_hw *hw) +{ + e1000_update_adaptive_generic(hw); +} + +/** + * e1000_disable_pcie_master - Disable PCI-Express master access + * @hw: pointer to the HW structure + * + * Disables PCI-Express master access and verifies there are no pending + * requests. Currently no func pointer exists and all implementations are + * handled in the generic version of this function. + **/ +s32 e1000_disable_pcie_master(struct e1000_hw *hw) +{ + return e1000_disable_pcie_master_generic(hw); +} + +/** + * e1000_config_collision_dist - Configure collision distance + * @hw: pointer to the HW structure + * + * Configures the collision distance to the default value and is used + * during link setup. + **/ +void e1000_config_collision_dist(struct e1000_hw *hw) +{ + if (hw->mac.ops.config_collision_dist) + hw->mac.ops.config_collision_dist(hw); +} + +/** + * e1000_rar_set - Sets a receive address register + * @hw: pointer to the HW structure + * @addr: address to set the RAR to + * @index: the RAR to set + * + * Sets a Receive Address Register (RAR) to the specified address. + **/ +void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) +{ + if (hw->mac.ops.rar_set) + hw->mac.ops.rar_set(hw, addr, index); +} + +/** + * e1000_validate_mdi_setting - Ensures valid MDI/MDIX SW state + * @hw: pointer to the HW structure + * + * Ensures that the MDI/MDIX SW state is valid. + **/ +s32 e1000_validate_mdi_setting(struct e1000_hw *hw) +{ + if (hw->mac.ops.validate_mdi_setting) + return hw->mac.ops.validate_mdi_setting(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_hash_mc_addr - Determines address location in multicast table + * @hw: pointer to the HW structure + * @mc_addr: Multicast address to hash. + * + * This hashes an address to determine its location in the multicast + * table. Currently no func pointer exists and all implementations + * are handled in the generic version of this function. + **/ +u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) +{ + return e1000_hash_mc_addr_generic(hw, mc_addr); +} + +/** + * e1000_enable_tx_pkt_filtering - Enable packet filtering on TX + * @hw: pointer to the HW structure + * + * Enables packet filtering on transmit packets if manageability is enabled + * and host interface is enabled. + * Currently no func pointer exists and all implementations are handled in the + * generic version of this function. + **/ +bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) +{ + return e1000_enable_tx_pkt_filtering_generic(hw); +} + +/** + * e1000_mng_host_if_write - Writes to the manageability host interface + * @hw: pointer to the HW structure + * @buffer: pointer to the host interface buffer + * @length: size of the buffer + * @offset: location in the buffer to write to + * @sum: sum of the data (not checksum) + * + * This function writes the buffer content at the offset given on the host if. + * It also does alignment considerations to do the writes in most efficient + * way. Also fills up the sum of the buffer in *buffer parameter. + **/ +s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, + u16 offset, u8 *sum) +{ + return e1000_mng_host_if_write_generic(hw, buffer, length, offset, sum); +} + +/** + * e1000_mng_write_cmd_header - Writes manageability command header + * @hw: pointer to the HW structure + * @hdr: pointer to the host interface command header + * + * Writes the command header after does the checksum calculation. + **/ +s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr) +{ + return e1000_mng_write_cmd_header_generic(hw, hdr); +} + +/** + * e1000_mng_enable_host_if - Checks host interface is enabled + * @hw: pointer to the HW structure + * + * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND + * + * This function checks whether the HOST IF is enabled for command operation + * and also checks whether the previous command is completed. It busy waits + * in case of previous command is not completed. + **/ +s32 e1000_mng_enable_host_if(struct e1000_hw *hw) +{ + return e1000_mng_enable_host_if_generic(hw); +} + +/** + * e1000_check_reset_block - Verifies PHY can be reset + * @hw: pointer to the HW structure + * + * Checks if the PHY is in a state that can be reset or if manageability + * has it tied up. This is a function pointer entry point called by drivers. + **/ +s32 e1000_check_reset_block(struct e1000_hw *hw) +{ + if (hw->phy.ops.check_reset_block) + return hw->phy.ops.check_reset_block(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_read_phy_reg - Reads PHY register + * @hw: pointer to the HW structure + * @offset: the register to read + * @data: the buffer to store the 16-bit read. + * + * Reads the PHY register and returns the value in data. + * This is a function pointer entry point called by drivers. + **/ +s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data) +{ + if (hw->phy.ops.read_reg) + return hw->phy.ops.read_reg(hw, offset, data); + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg - Writes PHY register + * @hw: pointer to the HW structure + * @offset: the register to write + * @data: the value to write. + * + * Writes the PHY register at offset with the value in data. + * This is a function pointer entry point called by drivers. + **/ +s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data) +{ + if (hw->phy.ops.write_reg) + return hw->phy.ops.write_reg(hw, offset, data); + + return E1000_SUCCESS; +} + +/** + * e1000_release_phy - Generic release PHY + * @hw: pointer to the HW structure + * + * Return if silicon family does not require a semaphore when accessing the + * PHY. + **/ +void e1000_release_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.release) + hw->phy.ops.release(hw); +} + +/** + * e1000_acquire_phy - Generic acquire PHY + * @hw: pointer to the HW structure + * + * Return success if silicon family does not require a semaphore when + * accessing the PHY. + **/ +s32 e1000_acquire_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.acquire) + return hw->phy.ops.acquire(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_read_kmrn_reg - Reads register using Kumeran interface + * @hw: pointer to the HW structure + * @offset: the register to read + * @data: the location to store the 16-bit value read. + * + * Reads a register out of the Kumeran interface. Currently no func pointer + * exists and all implementations are handled in the generic version of + * this function. + **/ +s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return e1000_read_kmrn_reg_generic(hw, offset, data); +} + +/** + * e1000_write_kmrn_reg - Writes register using Kumeran interface + * @hw: pointer to the HW structure + * @offset: the register to write + * @data: the value to write. + * + * Writes a register to the Kumeran interface. Currently no func pointer + * exists and all implementations are handled in the generic version of + * this function. + **/ +s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) +{ + return e1000_write_kmrn_reg_generic(hw, offset, data); +} + +/** + * e1000_get_cable_length - Retrieves cable length estimation + * @hw: pointer to the HW structure + * + * This function estimates the cable length and stores them in + * hw->phy.min_length and hw->phy.max_length. This is a function pointer + * entry point called by drivers. + **/ +s32 e1000_get_cable_length(struct e1000_hw *hw) +{ + if (hw->phy.ops.get_cable_length) + return hw->phy.ops.get_cable_length(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_get_phy_info - Retrieves PHY information from registers + * @hw: pointer to the HW structure + * + * This function gets some information from various PHY registers and + * populates hw->phy values with it. This is a function pointer entry + * point called by drivers. + **/ +s32 e1000_get_phy_info(struct e1000_hw *hw) +{ + if (hw->phy.ops.get_info) + return hw->phy.ops.get_info(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_phy_hw_reset - Hard PHY reset + * @hw: pointer to the HW structure + * + * Performs a hard PHY reset. This is a function pointer entry point called + * by drivers. + **/ +s32 e1000_phy_hw_reset(struct e1000_hw *hw) +{ + if (hw->phy.ops.reset) + return hw->phy.ops.reset(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_phy_commit - Soft PHY reset + * @hw: pointer to the HW structure + * + * Performs a soft PHY reset on those that apply. This is a function pointer + * entry point called by drivers. + **/ +s32 e1000_phy_commit(struct e1000_hw *hw) +{ + if (hw->phy.ops.commit) + return hw->phy.ops.commit(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_set_d0_lplu_state - Sets low power link up state for D0 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D0 + * and SmartSpeed is disabled when active is true, else clear lplu for D0 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. This is a function pointer entry point called by drivers. + **/ +s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) +{ + if (hw->phy.ops.set_d0_lplu_state) + return hw->phy.ops.set_d0_lplu_state(hw, active); + + return E1000_SUCCESS; +} + +/** + * e1000_set_d3_lplu_state - Sets low power link up state for D3 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D3 + * and SmartSpeed is disabled when active is true, else clear lplu for D3 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. This is a function pointer entry point called by drivers. + **/ +s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) +{ + if (hw->phy.ops.set_d3_lplu_state) + return hw->phy.ops.set_d3_lplu_state(hw, active); + + return E1000_SUCCESS; +} + +/** + * e1000_read_mac_addr - Reads MAC address + * @hw: pointer to the HW structure + * + * Reads the MAC address out of the adapter and stores it in the HW structure. + * Currently no func pointer exists and all implementations are handled in the + * generic version of this function. + **/ +s32 e1000_read_mac_addr(struct e1000_hw *hw) +{ + if (hw->mac.ops.read_mac_addr) + return hw->mac.ops.read_mac_addr(hw); + + return e1000_read_mac_addr_generic(hw); +} + +/** + * e1000_read_pba_string - Read device part number string + * @hw: pointer to the HW structure + * @pba_num: pointer to device part number + * @pba_num_size: size of part number buffer + * + * Reads the product board assembly (PBA) number from the EEPROM and stores + * the value in pba_num. + * Currently no func pointer exists and all implementations are handled in the + * generic version of this function. + **/ +s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size) +{ + return e1000_read_pba_string_generic(hw, pba_num, pba_num_size); +} + +/** + * e1000_read_pba_length - Read device part number string length + * @hw: pointer to the HW structure + * @pba_num_size: size of part number buffer + * + * Reads the product board assembly (PBA) number length from the EEPROM and + * stores the value in pba_num. + * Currently no func pointer exists and all implementations are handled in the + * generic version of this function. + **/ +s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size) +{ + return e1000_read_pba_length_generic(hw, pba_num_size); +} + +/** + * e1000_validate_nvm_checksum - Verifies NVM (EEPROM) checksum + * @hw: pointer to the HW structure + * + * Validates the NVM checksum is correct. This is a function pointer entry + * point called by drivers. + **/ +s32 e1000_validate_nvm_checksum(struct e1000_hw *hw) +{ + if (hw->nvm.ops.validate) + return hw->nvm.ops.validate(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_update_nvm_checksum - Updates NVM (EEPROM) checksum + * @hw: pointer to the HW structure + * + * Updates the NVM checksum. Currently no func pointer exists and all + * implementations are handled in the generic version of this function. + **/ +s32 e1000_update_nvm_checksum(struct e1000_hw *hw) +{ + if (hw->nvm.ops.update) + return hw->nvm.ops.update(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_reload_nvm - Reloads EEPROM + * @hw: pointer to the HW structure + * + * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the + * extended control register. + **/ +void e1000_reload_nvm(struct e1000_hw *hw) +{ + if (hw->nvm.ops.reload) + hw->nvm.ops.reload(hw); +} + +/** + * e1000_read_nvm - Reads NVM (EEPROM) + * @hw: pointer to the HW structure + * @offset: the word offset to read + * @words: number of 16-bit words to read + * @data: pointer to the properly sized buffer for the data. + * + * Reads 16-bit chunks of data from the NVM (EEPROM). This is a function + * pointer entry point called by drivers. + **/ +s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + if (hw->nvm.ops.read) + return hw->nvm.ops.read(hw, offset, words, data); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_write_nvm - Writes to NVM (EEPROM) + * @hw: pointer to the HW structure + * @offset: the word offset to read + * @words: number of 16-bit words to write + * @data: pointer to the properly sized buffer for the data. + * + * Writes 16-bit chunks of data to the NVM (EEPROM). This is a function + * pointer entry point called by drivers. + **/ +s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + if (hw->nvm.ops.write) + return hw->nvm.ops.write(hw, offset, words, data); + + return E1000_SUCCESS; +} + +/** + * e1000_write_8bit_ctrl_reg - Writes 8bit Control register + * @hw: pointer to the HW structure + * @reg: 32bit register offset + * @offset: the register to write + * @data: the value to write. + * + * Writes the PHY register at offset with the value in data. + * This is a function pointer entry point called by drivers. + **/ +s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, + u8 data) +{ + return e1000_write_8bit_ctrl_reg_generic(hw, reg, offset, data); +} + +/** + * e1000_power_up_phy - Restores link in case of PHY power down + * @hw: pointer to the HW structure + * + * The phy may be powered down to save power, to turn off link when the + * driver is unloaded, or wake on lan is not enabled (among others). + **/ +void e1000_power_up_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.power_up) + hw->phy.ops.power_up(hw); + + e1000_setup_link(hw); +} + +/** + * e1000_power_down_phy - Power down PHY + * @hw: pointer to the HW structure + * + * The phy may be powered down to save power, to turn off link when the + * driver is unloaded, or wake on lan is not enabled (among others). + **/ +void e1000_power_down_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.power_down) + hw->phy.ops.power_down(hw); +} + +/** + * e1000_power_up_fiber_serdes_link - Power up serdes link + * @hw: pointer to the HW structure + * + * Power on the optics and PCS. + **/ +void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw) +{ + if (hw->mac.ops.power_up_serdes) + hw->mac.ops.power_up_serdes(hw); +} + +/** + * e1000_shutdown_fiber_serdes_link - Remove link during power down + * @hw: pointer to the HW structure + * + * Shutdown the optics and PCS on driver unload. + **/ +void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw) +{ + if (hw->mac.ops.shutdown_serdes) + hw->mac.ops.shutdown_serdes(hw); +} + +/** + * e1000_get_thermal_sensor_data - Gathers thermal sensor data + * @hw: pointer to hardware structure + * + * Updates the temperatures in mac.thermal_sensor_data + **/ +s32 e1000_get_thermal_sensor_data(struct e1000_hw *hw) +{ + if (hw->mac.ops.get_thermal_sensor_data) + return hw->mac.ops.get_thermal_sensor_data(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_init_thermal_sensor_thresh - Sets thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Sets the thermal sensor thresholds according to the NVM map + **/ +s32 e1000_init_thermal_sensor_thresh(struct e1000_hw *hw) +{ + if (hw->mac.ops.init_thermal_sensor_thresh) + return hw->mac.ops.init_thermal_sensor_thresh(hw); + + return E1000_SUCCESS; +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_api.h b/kernel/linux/kni/ethtool/igb/e1000_api.h new file mode 100644 index 00000000..0bc00acd --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_api.h @@ -0,0 +1,142 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_API_H_ +#define _E1000_API_H_ + +#include "e1000_hw.h" + +extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); +extern void e1000_rx_fifo_flush_82575(struct e1000_hw *hw); +extern void e1000_init_function_pointers_vf(struct e1000_hw *hw); +extern void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw); +extern void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw); +extern void e1000_init_function_pointers_i210(struct e1000_hw *hw); + +s32 e1000_set_obff_timer(struct e1000_hw *hw, u32 itr); +s32 e1000_set_mac_type(struct e1000_hw *hw); +s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device); +s32 e1000_init_mac_params(struct e1000_hw *hw); +s32 e1000_init_nvm_params(struct e1000_hw *hw); +s32 e1000_init_phy_params(struct e1000_hw *hw); +s32 e1000_init_mbx_params(struct e1000_hw *hw); +s32 e1000_get_bus_info(struct e1000_hw *hw); +void e1000_clear_vfta(struct e1000_hw *hw); +void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value); +s32 e1000_force_mac_fc(struct e1000_hw *hw); +s32 e1000_check_for_link(struct e1000_hw *hw); +s32 e1000_reset_hw(struct e1000_hw *hw); +s32 e1000_init_hw(struct e1000_hw *hw); +s32 e1000_setup_link(struct e1000_hw *hw); +s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex); +s32 e1000_disable_pcie_master(struct e1000_hw *hw); +void e1000_config_collision_dist(struct e1000_hw *hw); +void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); +u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); +void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count); +s32 e1000_setup_led(struct e1000_hw *hw); +s32 e1000_cleanup_led(struct e1000_hw *hw); +s32 e1000_check_reset_block(struct e1000_hw *hw); +s32 e1000_blink_led(struct e1000_hw *hw); +s32 e1000_led_on(struct e1000_hw *hw); +s32 e1000_led_off(struct e1000_hw *hw); +s32 e1000_id_led_init(struct e1000_hw *hw); +void e1000_reset_adaptive(struct e1000_hw *hw); +void e1000_update_adaptive(struct e1000_hw *hw); +s32 e1000_get_cable_length(struct e1000_hw *hw); +s32 e1000_validate_mdi_setting(struct e1000_hw *hw); +s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, + u8 data); +s32 e1000_get_phy_info(struct e1000_hw *hw); +void e1000_release_phy(struct e1000_hw *hw); +s32 e1000_acquire_phy(struct e1000_hw *hw); +s32 e1000_phy_hw_reset(struct e1000_hw *hw); +s32 e1000_phy_commit(struct e1000_hw *hw); +void e1000_power_up_phy(struct e1000_hw *hw); +void e1000_power_down_phy(struct e1000_hw *hw); +s32 e1000_read_mac_addr(struct e1000_hw *hw); +s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size); +s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size); +void e1000_reload_nvm(struct e1000_hw *hw); +s32 e1000_update_nvm_checksum(struct e1000_hw *hw); +s32 e1000_validate_nvm_checksum(struct e1000_hw *hw); +s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active); +s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); +bool e1000_check_mng_mode(struct e1000_hw *hw); +bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); +s32 e1000_mng_enable_host_if(struct e1000_hw *hw); +s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, + u16 offset, u8 *sum); +s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr); +s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length); +s32 e1000_get_thermal_sensor_data(struct e1000_hw *hw); +s32 e1000_init_thermal_sensor_thresh(struct e1000_hw *hw); + + + +/* + * TBI_ACCEPT macro definition: + * + * This macro requires: + * adapter = a pointer to struct e1000_hw + * status = the 8 bit status field of the Rx descriptor with EOP set + * error = the 8 bit error field of the Rx descriptor with EOP set + * length = the sum of all the length fields of the Rx descriptors that + * make up the current frame + * last_byte = the last byte of the frame DMAed by the hardware + * max_frame_length = the maximum frame length we want to accept. + * min_frame_length = the minimum frame length we want to accept. + * + * This macro is a conditional that should be used in the interrupt + * handler's Rx processing routine when RxErrors have been detected. + * + * Typical use: + * ... + * if (TBI_ACCEPT) { + * accept_frame = true; + * e1000_tbi_adjust_stats(adapter, MacAddress); + * frame_length--; + * } else { + * accept_frame = false; + * } + * ... + */ + +/* The carrier extension symbol, as received by the NIC. */ +#define CARRIER_EXTENSION 0x0F + +#define TBI_ACCEPT(a, status, errors, length, last_byte, \ + min_frame_size, max_frame_size) \ + (e1000_tbi_sbp_enabled_82543(a) && \ + (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \ + ((last_byte) == CARRIER_EXTENSION) && \ + (((status) & E1000_RXD_STAT_VP) ? \ + (((length) > (min_frame_size - VLAN_TAG_SIZE)) && \ + ((length) <= (max_frame_size + 1))) : \ + (((length) > min_frame_size) && \ + ((length) <= (max_frame_size + VLAN_TAG_SIZE + 1))))) + +#ifndef E1000_MAX +#define E1000_MAX(a, b) ((a) > (b) ? (a) : (b)) +#endif +#ifndef E1000_DIVIDE_ROUND_UP +#define E1000_DIVIDE_ROUND_UP(a, b) (((a) + (b) - 1) / (b)) /* ceil(a/b) */ +#endif +#endif /* _E1000_API_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_defines.h b/kernel/linux/kni/ethtool/igb/e1000_defines.h new file mode 100644 index 00000000..b39aaf80 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_defines.h @@ -0,0 +1,1365 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_DEFINES_H_ +#define _E1000_DEFINES_H_ + +/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ +#define REQ_TX_DESCRIPTOR_MULTIPLE 8 +#define REQ_RX_DESCRIPTOR_MULTIPLE 8 + +/* Definitions for power management and wakeup registers */ +/* Wake Up Control */ +#define E1000_WUC_APME 0x00000001 /* APM Enable */ +#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ +#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ +#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ +#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */ + +/* Wake Up Filter Control */ +#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ +#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ +#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ +#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ +#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ + +/* Wake Up Status */ +#define E1000_WUS_LNKC E1000_WUFC_LNKC +#define E1000_WUS_MAG E1000_WUFC_MAG +#define E1000_WUS_EX E1000_WUFC_EX +#define E1000_WUS_MC E1000_WUFC_MC +#define E1000_WUS_BC E1000_WUFC_BC + +/* Extended Device Control */ +#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* SW Definable Pin 4 data */ +#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* SW Definable Pin 6 data */ +#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* SW Definable Pin 3 data */ +#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */ +#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* Direction of SDP3 0=in 1=out */ +#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ +/* Physical Func Reset Done Indication */ +#define E1000_CTRL_EXT_PFRSTD 0x00004000 +#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ +#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ +#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clk Gating */ +#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 +/* Offset of the link mode field in Ctrl Ext register */ +#define E1000_CTRL_EXT_LINK_MODE_OFFSET 22 +#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 +#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 +#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 +#define E1000_CTRL_EXT_EIAME 0x01000000 +#define E1000_CTRL_EXT_IRCA 0x00000001 +#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Drv loaded bit for FW */ +#define E1000_CTRL_EXT_IAME 0x08000000 /* Int ACK Auto-mask */ +#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ +#define E1000_I2CCMD_REG_ADDR_SHIFT 16 +#define E1000_I2CCMD_PHY_ADDR_SHIFT 24 +#define E1000_I2CCMD_OPCODE_READ 0x08000000 +#define E1000_I2CCMD_OPCODE_WRITE 0x00000000 +#define E1000_I2CCMD_READY 0x20000000 +#define E1000_I2CCMD_ERROR 0x80000000 +#define E1000_I2CCMD_SFP_DATA_ADDR(a) (0x0000 + (a)) +#define E1000_I2CCMD_SFP_DIAG_ADDR(a) (0x0100 + (a)) +#define E1000_MAX_SGMII_PHY_REG_ADDR 255 +#define E1000_I2CCMD_PHY_TIMEOUT 200 +#define E1000_IVAR_VALID 0x80 +#define E1000_GPIE_NSICR 0x00000001 +#define E1000_GPIE_MSIX_MODE 0x00000010 +#define E1000_GPIE_EIAME 0x40000000 +#define E1000_GPIE_PBA 0x80000000 + +/* Receive Descriptor bit definitions */ +#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ +#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ +#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ +#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ +#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ +#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ +#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ +#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ +#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ +#define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ +#define E1000_RXD_ERR_CE 0x01 /* CRC Error */ +#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ +#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ +#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ +#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ +#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ +#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ +#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ + +#define E1000_RXDEXT_STATERR_TST 0x00000100 /* Time Stamp taken */ +#define E1000_RXDEXT_STATERR_LB 0x00040000 +#define E1000_RXDEXT_STATERR_CE 0x01000000 +#define E1000_RXDEXT_STATERR_SE 0x02000000 +#define E1000_RXDEXT_STATERR_SEQ 0x04000000 +#define E1000_RXDEXT_STATERR_CXE 0x10000000 +#define E1000_RXDEXT_STATERR_TCPE 0x20000000 +#define E1000_RXDEXT_STATERR_IPE 0x40000000 +#define E1000_RXDEXT_STATERR_RXE 0x80000000 + +/* mask to determine if packets should be dropped due to frame errors */ +#define E1000_RXD_ERR_FRAME_ERR_MASK ( \ + E1000_RXD_ERR_CE | \ + E1000_RXD_ERR_SE | \ + E1000_RXD_ERR_SEQ | \ + E1000_RXD_ERR_CXE | \ + E1000_RXD_ERR_RXE) + +/* Same mask, but for extended and packet split descriptors */ +#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) + +#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 +#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 +#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000 +#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 + +#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000 + +/* Management Control */ +#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ +#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ +#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ +#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ +#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ +/* Enable MAC address filtering */ +#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 +/* Enable MNG packets to host memory */ +#define E1000_MANC_EN_MNG2HOST 0x00200000 + +#define E1000_MANC2H_PORT_623 0x00000020 /* Port 0x26f */ +#define E1000_MANC2H_PORT_664 0x00000040 /* Port 0x298 */ +#define E1000_MDEF_PORT_623 0x00000800 /* Port 0x26f */ +#define E1000_MDEF_PORT_664 0x00000400 /* Port 0x298 */ + +/* Receive Control */ +#define E1000_RCTL_RST 0x00000001 /* Software reset */ +#define E1000_RCTL_EN 0x00000002 /* enable */ +#define E1000_RCTL_SBP 0x00000004 /* store bad packet */ +#define E1000_RCTL_UPE 0x00000008 /* unicast promisc enable */ +#define E1000_RCTL_MPE 0x00000010 /* multicast promisc enable */ +#define E1000_RCTL_LPE 0x00000020 /* long packet enable */ +#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ +#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ +#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ +#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ +#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min thresh size */ +#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ +#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ +#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ +/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ +#define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */ +#define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */ +#define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */ +#define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */ +/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ +#define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */ +#define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */ +#define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */ +#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ +#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ +#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ +#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ +#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ +#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ +#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ + +/* Use byte values for the following shift parameters + * Usage: + * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & + * E1000_PSRCTL_BSIZE0_MASK) | + * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) & + * E1000_PSRCTL_BSIZE1_MASK) | + * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) & + * E1000_PSRCTL_BSIZE2_MASK) | + * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |; + * E1000_PSRCTL_BSIZE3_MASK)) + * where value0 = [128..16256], default=256 + * value1 = [1024..64512], default=4096 + * value2 = [0..64512], default=4096 + * value3 = [0..64512], default=0 + */ + +#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F +#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 +#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 +#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 + +#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ +#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ +#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ +#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ + +/* SWFW_SYNC Definitions */ +#define E1000_SWFW_EEP_SM 0x01 +#define E1000_SWFW_PHY0_SM 0x02 +#define E1000_SWFW_PHY1_SM 0x04 +#define E1000_SWFW_CSR_SM 0x08 +#define E1000_SWFW_PHY2_SM 0x20 +#define E1000_SWFW_PHY3_SM 0x40 +#define E1000_SWFW_SW_MNG_SM 0x400 + +/* Device Control */ +#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ +#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ +#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master reqs */ +#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ +#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ +#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ +#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ +#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ +#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ +#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ +#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ +#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ +#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ +#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ +#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ +#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */ +#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ +#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ +#define E1000_CTRL_RST 0x04000000 /* Global reset */ +#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ +#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ +#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ +#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ +#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */ + + +#define E1000_CONNSW_ENRGSRC 0x4 +#define E1000_CONNSW_PHYSD 0x400 +#define E1000_CONNSW_PHY_PDN 0x800 +#define E1000_CONNSW_SERDESD 0x200 +#define E1000_CONNSW_AUTOSENSE_CONF 0x2 +#define E1000_CONNSW_AUTOSENSE_EN 0x1 +#define E1000_PCS_CFG_PCS_EN 8 +#define E1000_PCS_LCTL_FLV_LINK_UP 1 +#define E1000_PCS_LCTL_FSV_10 0 +#define E1000_PCS_LCTL_FSV_100 2 +#define E1000_PCS_LCTL_FSV_1000 4 +#define E1000_PCS_LCTL_FDV_FULL 8 +#define E1000_PCS_LCTL_FSD 0x10 +#define E1000_PCS_LCTL_FORCE_LINK 0x20 +#define E1000_PCS_LCTL_FORCE_FCTRL 0x80 +#define E1000_PCS_LCTL_AN_ENABLE 0x10000 +#define E1000_PCS_LCTL_AN_RESTART 0x20000 +#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000 +#define E1000_ENABLE_SERDES_LOOPBACK 0x0410 + +#define E1000_PCS_LSTS_LINK_OK 1 +#define E1000_PCS_LSTS_SPEED_100 2 +#define E1000_PCS_LSTS_SPEED_1000 4 +#define E1000_PCS_LSTS_DUPLEX_FULL 8 +#define E1000_PCS_LSTS_SYNK_OK 0x10 +#define E1000_PCS_LSTS_AN_COMPLETE 0x10000 + +/* Device Status */ +#define E1000_STATUS_FD 0x00000001 /* Duplex 0=half 1=full */ +#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ +#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ +#define E1000_STATUS_FUNC_SHIFT 2 +#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ +#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ +#define E1000_STATUS_SPEED_MASK 0x000000C0 +#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ +#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ +#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ +#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Compltn by NVM */ +#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */ +#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Master request status */ +#define E1000_STATUS_2P5_SKU 0x00001000 /* Val of 2.5GBE SKU strap */ +#define E1000_STATUS_2P5_SKU_OVER 0x00002000 /* Val of 2.5GBE SKU Over */ + +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define SPEED_2500 2500 +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 + + +#define ADVERTISE_10_HALF 0x0001 +#define ADVERTISE_10_FULL 0x0002 +#define ADVERTISE_100_HALF 0x0004 +#define ADVERTISE_100_FULL 0x0008 +#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */ +#define ADVERTISE_1000_FULL 0x0020 + +/* 1000/H is not supported, nor spec-compliant. */ +#define E1000_ALL_SPEED_DUPLEX ( \ + ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ + ADVERTISE_100_FULL | ADVERTISE_1000_FULL) +#define E1000_ALL_NOT_GIG ( \ + ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ + ADVERTISE_100_FULL) +#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL) +#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL) +#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF) + +#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX + +/* LED Control */ +#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F +#define E1000_LEDCTL_LED0_MODE_SHIFT 0 +#define E1000_LEDCTL_LED0_IVRT 0x00000040 +#define E1000_LEDCTL_LED0_BLINK 0x00000080 + +#define E1000_LEDCTL_MODE_LED_ON 0xE +#define E1000_LEDCTL_MODE_LED_OFF 0xF + +/* Transmit Descriptor bit definitions */ +#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ +#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ +#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ +#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ +#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ +#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ +#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ +#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ +#define E1000_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */ +#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ +#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ +#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ +#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ +#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ +#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ +#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ +#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ +#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ +#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ +#define E1000_TXD_EXTCMD_TSTAMP 0x00000010 /* IEEE1588 Timestamp packet */ + +/* Transmit Control */ +#define E1000_TCTL_EN 0x00000002 /* enable Tx */ +#define E1000_TCTL_PSP 0x00000008 /* pad short packets */ +#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ +#define E1000_TCTL_COLD 0x003ff000 /* collision distance */ +#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ +#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ + +/* Transmit Arbitration Count */ +#define E1000_TARC0_ENABLE 0x00000400 /* Enable Tx Queue 0 */ + +/* SerDes Control */ +#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 +#define E1000_SCTL_ENABLE_SERDES_LOOPBACK 0x0410 + +/* Receive Checksum Control */ +#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ +#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ +#define E1000_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */ +#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ + +/* Header split receive */ +#define E1000_RFCTL_NFSW_DIS 0x00000040 +#define E1000_RFCTL_NFSR_DIS 0x00000080 +#define E1000_RFCTL_ACK_DIS 0x00001000 +#define E1000_RFCTL_EXTEN 0x00008000 +#define E1000_RFCTL_IPV6_EX_DIS 0x00010000 +#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 +#define E1000_RFCTL_LEF 0x00040000 + +/* Collision related configuration parameters */ +#define E1000_COLLISION_THRESHOLD 15 +#define E1000_CT_SHIFT 4 +#define E1000_COLLISION_DISTANCE 63 +#define E1000_COLD_SHIFT 12 + +/* Default values for the transmit IPG register */ +#define DEFAULT_82543_TIPG_IPGT_FIBER 9 +#define DEFAULT_82543_TIPG_IPGT_COPPER 8 + +#define E1000_TIPG_IPGT_MASK 0x000003FF + +#define DEFAULT_82543_TIPG_IPGR1 8 +#define E1000_TIPG_IPGR1_SHIFT 10 + +#define DEFAULT_82543_TIPG_IPGR2 6 +#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7 +#define E1000_TIPG_IPGR2_SHIFT 20 + +/* Ethertype field values */ +#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ + +#define ETHERNET_FCS_SIZE 4 +#define MAX_JUMBO_FRAME_SIZE 0x3F00 + +/* Extended Configuration Control and Size */ +#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 +#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008 +#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 +#define E1000_EXTCNF_CTRL_GATE_PHY_CFG 0x00000080 +#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000 +#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT 16 + +#define E1000_PHY_CTRL_D0A_LPLU 0x00000002 +#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004 +#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008 +#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040 + +#define E1000_KABGTXD_BGSQLBIAS 0x00050000 + +/* PBA constants */ +#define E1000_PBA_8K 0x0008 /* 8KB */ +#define E1000_PBA_10K 0x000A /* 10KB */ +#define E1000_PBA_12K 0x000C /* 12KB */ +#define E1000_PBA_14K 0x000E /* 14KB */ +#define E1000_PBA_16K 0x0010 /* 16KB */ +#define E1000_PBA_18K 0x0012 +#define E1000_PBA_20K 0x0014 +#define E1000_PBA_22K 0x0016 +#define E1000_PBA_24K 0x0018 +#define E1000_PBA_26K 0x001A +#define E1000_PBA_30K 0x001E +#define E1000_PBA_32K 0x0020 +#define E1000_PBA_34K 0x0022 +#define E1000_PBA_35K 0x0023 +#define E1000_PBA_38K 0x0026 +#define E1000_PBA_40K 0x0028 +#define E1000_PBA_48K 0x0030 /* 48KB */ +#define E1000_PBA_64K 0x0040 /* 64KB */ + +#define E1000_PBA_RXA_MASK 0xFFFF + +#define E1000_PBS_16K E1000_PBA_16K + +#define IFS_MAX 80 +#define IFS_MIN 40 +#define IFS_RATIO 4 +#define IFS_STEP 10 +#define MIN_NUM_XMITS 1000 + +/* SW Semaphore Register */ +#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ + +#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */ + +/* Interrupt Cause Read */ +#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ +#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ +#define E1000_ICR_LSC 0x00000004 /* Link Status Change */ +#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ +#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ +#define E1000_ICR_RXO 0x00000040 /* Rx overrun */ +#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ +#define E1000_ICR_VMMB 0x00000100 /* VM MB event */ +#define E1000_ICR_RXCFG 0x00000400 /* Rx /c/ ordered set */ +#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ +#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ +#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ +#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ +#define E1000_ICR_TXD_LOW 0x00008000 +#define E1000_ICR_MNG 0x00040000 /* Manageability event */ +#define E1000_ICR_TS 0x00080000 /* Time Sync Interrupt */ +#define E1000_ICR_DRSTA 0x40000000 /* Device Reset Asserted */ +/* If this bit asserted, the driver should claim the interrupt */ +#define E1000_ICR_INT_ASSERTED 0x80000000 +#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */ +#define E1000_ICR_FER 0x00400000 /* Fatal Error */ + +#define E1000_ICR_THS 0x00800000 /* ICR.THS: Thermal Sensor Event*/ +#define E1000_ICR_MDDET 0x10000000 /* Malicious Driver Detect */ + + +/* Extended Interrupt Cause Read */ +#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */ +#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */ +#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */ +#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */ +#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */ +#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */ +#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */ +#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */ +#define E1000_EICR_TCP_TIMER 0x40000000 /* TCP Timer */ +#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ +/* TCP Timer */ +#define E1000_TCPTIMER_KS 0x00000100 /* KickStart */ +#define E1000_TCPTIMER_COUNT_ENABLE 0x00000200 /* Count Enable */ +#define E1000_TCPTIMER_COUNT_FINISH 0x00000400 /* Count finish */ +#define E1000_TCPTIMER_LOOP 0x00000800 /* Loop */ + +/* This defines the bits that are set in the Interrupt Mask + * Set/Read Register. Each bit is documented below: + * o RXT0 = Receiver Timer Interrupt (ring 0) + * o TXDW = Transmit Descriptor Written Back + * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0) + * o RXSEQ = Receive Sequence Error + * o LSC = Link Status Change + */ +#define IMS_ENABLE_MASK ( \ + E1000_IMS_RXT0 | \ + E1000_IMS_TXDW | \ + E1000_IMS_RXDMT0 | \ + E1000_IMS_RXSEQ | \ + E1000_IMS_LSC) + +/* Interrupt Mask Set */ +#define E1000_IMS_TXDW E1000_ICR_TXDW /* Tx desc written back */ +#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ +#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */ +#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ +#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ +#define E1000_IMS_RXO E1000_ICR_RXO /* Rx overrun */ +#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ +#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW +#define E1000_IMS_TS E1000_ICR_TS /* Time Sync Interrupt */ +#define E1000_IMS_DRSTA E1000_ICR_DRSTA /* Device Reset Asserted */ +#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */ +#define E1000_IMS_FER E1000_ICR_FER /* Fatal Error */ + +#define E1000_IMS_THS E1000_ICR_THS /* ICR.TS: Thermal Sensor Event*/ +#define E1000_IMS_MDDET E1000_ICR_MDDET /* Malicious Driver Detect */ +/* Extended Interrupt Mask Set */ +#define E1000_EIMS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */ +#define E1000_EIMS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */ +#define E1000_EIMS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */ +#define E1000_EIMS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */ +#define E1000_EIMS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */ +#define E1000_EIMS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */ +#define E1000_EIMS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */ +#define E1000_EIMS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */ +#define E1000_EIMS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ +#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ + +/* Interrupt Cause Set */ +#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ +#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ + +/* Extended Interrupt Cause Set */ +#define E1000_EICS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */ +#define E1000_EICS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */ +#define E1000_EICS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */ +#define E1000_EICS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */ +#define E1000_EICS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */ +#define E1000_EICS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */ +#define E1000_EICS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */ +#define E1000_EICS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */ +#define E1000_EICS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ +#define E1000_EICS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ + +#define E1000_EITR_ITR_INT_MASK 0x0000FFFF +/* E1000_EITR_CNT_IGNR is only for 82576 and newer */ +#define E1000_EITR_CNT_IGNR 0x80000000 /* Don't reset counters on write */ +#define E1000_EITR_INTERVAL 0x00007FFC + +/* Transmit Descriptor Control */ +#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ +#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ +#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ +#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ +#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ +#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */ +/* Enable the counting of descriptors still to be processed. */ +#define E1000_TXDCTL_COUNT_DESC 0x00400000 + +/* Flow Control Constants */ +#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 +#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 +#define FLOW_CONTROL_TYPE 0x8808 + +/* 802.1q VLAN Packet Size */ +#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ +#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ + +/* Receive Address + * Number of high/low register pairs in the RAR. The RAR (Receive Address + * Registers) holds the directed and multicast addresses that we monitor. + * Technically, we have 16 spots. However, we reserve one of these spots + * (RAR[15]) for our directed address used by controllers with + * manageability enabled, allowing us room for 15 multicast addresses. + */ +#define E1000_RAR_ENTRIES 15 +#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ +#define E1000_RAL_MAC_ADDR_LEN 4 +#define E1000_RAH_MAC_ADDR_LEN 2 +#define E1000_RAH_QUEUE_MASK_82575 0x000C0000 +#define E1000_RAH_POOL_1 0x00040000 + +/* Error Codes */ +#define E1000_SUCCESS 0 +#define E1000_ERR_NVM 1 +#define E1000_ERR_PHY 2 +#define E1000_ERR_CONFIG 3 +#define E1000_ERR_PARAM 4 +#define E1000_ERR_MAC_INIT 5 +#define E1000_ERR_PHY_TYPE 6 +#define E1000_ERR_RESET 9 +#define E1000_ERR_MASTER_REQUESTS_PENDING 10 +#define E1000_ERR_HOST_INTERFACE_COMMAND 11 +#define E1000_BLK_PHY_RESET 12 +#define E1000_ERR_SWFW_SYNC 13 +#define E1000_NOT_IMPLEMENTED 14 +#define E1000_ERR_MBX 15 +#define E1000_ERR_INVALID_ARGUMENT 16 +#define E1000_ERR_NO_SPACE 17 +#define E1000_ERR_NVM_PBA_SECTION 18 +#define E1000_ERR_I2C 19 +#define E1000_ERR_INVM_VALUE_NOT_FOUND 20 + +/* Loop limit on how long we wait for auto-negotiation to complete */ +#define FIBER_LINK_UP_LIMIT 50 +#define COPPER_LINK_UP_LIMIT 10 +#define PHY_AUTO_NEG_LIMIT 45 +#define PHY_FORCE_LIMIT 20 +/* Number of 100 microseconds we wait for PCI Express master disable */ +#define MASTER_DISABLE_TIMEOUT 800 +/* Number of milliseconds we wait for PHY configuration done after MAC reset */ +#define PHY_CFG_TIMEOUT 100 +/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */ +#define MDIO_OWNERSHIP_TIMEOUT 10 +/* Number of milliseconds for NVM auto read done after MAC reset. */ +#define AUTO_READ_DONE_TIMEOUT 10 + +/* Flow Control */ +#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ +#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ +#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ + +/* Transmit Configuration Word */ +#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ +#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ +#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ +#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ +#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ + +/* Receive Configuration Word */ +#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ +#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ +#define E1000_RXCW_C 0x20000000 /* Receive config */ +#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ + +#define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ +#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */ + +#define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ +#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ +#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00 +#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02 +#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04 +#define E1000_TSYNCRXCTL_TYPE_ALL 0x08 +#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A +#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */ +#define E1000_TSYNCRXCTL_SYSCFI 0x00000020 /* Sys clock frequency */ + +#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK 0x000000FF +#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE 0x00 +#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE 0x01 +#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE 0x02 +#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03 +#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04 + +#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK 0x00000F00 +#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE 0x0000 +#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE 0x0100 +#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE 0x0200 +#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE 0x0300 +#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE 0x0800 +#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE 0x0900 +#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00 +#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE 0x0B00 +#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE 0x0C00 +#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE 0x0D00 + +#define E1000_TIMINCA_16NS_SHIFT 24 +#define E1000_TIMINCA_INCPERIOD_SHIFT 24 +#define E1000_TIMINCA_INCVALUE_MASK 0x00FFFFFF + +#define E1000_TSICR_TXTS 0x00000002 +#define E1000_TSIM_TXTS 0x00000002 +/* TUPLE Filtering Configuration */ +#define E1000_TTQF_DISABLE_MASK 0xF0008000 /* TTQF Disable Mask */ +#define E1000_TTQF_QUEUE_ENABLE 0x100 /* TTQF Queue Enable Bit */ +#define E1000_TTQF_PROTOCOL_MASK 0xFF /* TTQF Protocol Mask */ +/* TTQF TCP Bit, shift with E1000_TTQF_PROTOCOL SHIFT */ +#define E1000_TTQF_PROTOCOL_TCP 0x0 +/* TTQF UDP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */ +#define E1000_TTQF_PROTOCOL_UDP 0x1 +/* TTQF SCTP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */ +#define E1000_TTQF_PROTOCOL_SCTP 0x2 +#define E1000_TTQF_PROTOCOL_SHIFT 5 /* TTQF Protocol Shift */ +#define E1000_TTQF_QUEUE_SHIFT 16 /* TTQF Queue Shfit */ +#define E1000_TTQF_RX_QUEUE_MASK 0x70000 /* TTQF Queue Mask */ +#define E1000_TTQF_MASK_ENABLE 0x10000000 /* TTQF Mask Enable Bit */ +#define E1000_IMIR_CLEAR_MASK 0xF001FFFF /* IMIR Reg Clear Mask */ +#define E1000_IMIR_PORT_BYPASS 0x20000 /* IMIR Port Bypass Bit */ +#define E1000_IMIR_PRIORITY_SHIFT 29 /* IMIR Priority Shift */ +#define E1000_IMIREXT_CLEAR_MASK 0x7FFFF /* IMIREXT Reg Clear Mask */ + +#define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */ +#define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */ +#define E1000_MDICNFG_PHY_MASK 0x03E00000 +#define E1000_MDICNFG_PHY_SHIFT 21 + +#define E1000_MEDIA_PORT_COPPER 1 +#define E1000_MEDIA_PORT_OTHER 2 +#define E1000_M88E1112_AUTO_COPPER_SGMII 0x2 +#define E1000_M88E1112_AUTO_COPPER_BASEX 0x3 +#define E1000_M88E1112_STATUS_LINK 0x0004 /* Interface Link Bit */ +#define E1000_M88E1112_MAC_CTRL_1 0x10 +#define E1000_M88E1112_MAC_CTRL_1_MODE_MASK 0x0380 /* Mode Select */ +#define E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT 7 +#define E1000_M88E1112_PAGE_ADDR 0x16 +#define E1000_M88E1112_STATUS 0x01 + +#define E1000_THSTAT_LOW_EVENT 0x20000000 /* Low thermal threshold */ +#define E1000_THSTAT_MID_EVENT 0x00200000 /* Mid thermal threshold */ +#define E1000_THSTAT_HIGH_EVENT 0x00002000 /* High thermal threshold */ +#define E1000_THSTAT_PWR_DOWN 0x00000001 /* Power Down Event */ +#define E1000_THSTAT_LINK_THROTTLE 0x00000002 /* Link Spd Throttle Event */ + +/* I350 EEE defines */ +#define E1000_IPCNFG_EEE_1G_AN 0x00000008 /* IPCNFG EEE Ena 1G AN */ +#define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* IPCNFG EEE Ena 100M AN */ +#define E1000_EEER_TX_LPI_EN 0x00010000 /* EEER Tx LPI Enable */ +#define E1000_EEER_RX_LPI_EN 0x00020000 /* EEER Rx LPI Enable */ +#define E1000_EEER_LPI_FC 0x00040000 /* EEER Ena on Flow Cntrl */ +/* EEE status */ +#define E1000_EEER_EEE_NEG 0x20000000 /* EEE capability nego */ +#define E1000_EEER_RX_LPI_STATUS 0x40000000 /* Rx in LPI state */ +#define E1000_EEER_TX_LPI_STATUS 0x80000000 /* Tx in LPI state */ +#define E1000_EEE_LP_ADV_ADDR_I350 0x040F /* EEE LP Advertisement */ +#define E1000_M88E1543_PAGE_ADDR 0x16 /* Page Offset Register */ +#define E1000_M88E1543_EEE_CTRL_1 0x0 +#define E1000_M88E1543_EEE_CTRL_1_MS 0x0001 /* EEE Master/Slave */ +#define E1000_EEE_ADV_DEV_I354 7 +#define E1000_EEE_ADV_ADDR_I354 60 +#define E1000_EEE_ADV_100_SUPPORTED (1 << 1) /* 100BaseTx EEE Supported */ +#define E1000_EEE_ADV_1000_SUPPORTED (1 << 2) /* 1000BaseT EEE Supported */ +#define E1000_PCS_STATUS_DEV_I354 3 +#define E1000_PCS_STATUS_ADDR_I354 1 +#define E1000_PCS_STATUS_RX_LPI_RCVD 0x0400 +#define E1000_PCS_STATUS_TX_LPI_RCVD 0x0800 +#define E1000_EEE_SU_LPI_CLK_STP 0x00800000 /* EEE LPI Clock Stop */ +#define E1000_EEE_LP_ADV_DEV_I210 7 /* EEE LP Adv Device */ +#define E1000_EEE_LP_ADV_ADDR_I210 61 /* EEE LP Adv Register */ +/* PCI Express Control */ +#define E1000_GCR_RXD_NO_SNOOP 0x00000001 +#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002 +#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004 +#define E1000_GCR_TXD_NO_SNOOP 0x00000008 +#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010 +#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020 +#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000 +#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000 +#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000 +#define E1000_GCR_CAP_VER2 0x00040000 + +#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \ + E1000_GCR_RXDSCW_NO_SNOOP | \ + E1000_GCR_RXDSCR_NO_SNOOP | \ + E1000_GCR_TXD_NO_SNOOP | \ + E1000_GCR_TXDSCW_NO_SNOOP | \ + E1000_GCR_TXDSCR_NO_SNOOP) + +#define E1000_MMDAC_FUNC_DATA 0x4000 /* Data, no post increment */ + +/* mPHY address control and data registers */ +#define E1000_MPHY_ADDR_CTL 0x0024 /* Address Control Reg */ +#define E1000_MPHY_ADDR_CTL_OFFSET_MASK 0xFFFF0000 +#define E1000_MPHY_DATA 0x0E10 /* Data Register */ + +/* AFE CSR Offset for PCS CLK */ +#define E1000_MPHY_PCS_CLK_REG_OFFSET 0x0004 +/* Override for near end digital loopback. */ +#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10 + +/* PHY Control Register */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define MII_CR_SPEED_1000 0x0040 +#define MII_CR_SPEED_100 0x2000 +#define MII_CR_SPEED_10 0x0000 + +/* PHY Status Register */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ + +/* Autoneg Advertisement Register */ +#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ +#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ +#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ +#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ + +/* Link Partner Ability Register (Base Page) */ +#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ +#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP 10T Half Dplx Capable */ +#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP 10T Full Dplx Capable */ +#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP 100TX Half Dplx Capable */ +#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP 100TX Full Dplx Capable */ +#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ +#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ +#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asym Pause Direction bit */ +#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP detected Remote Fault */ +#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP rx'd link code word */ +#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ + +/* Autoneg Expansion Register */ +#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ +#define NWAY_ER_PAGE_RXD 0x0002 /* LP 10T Half Dplx Capable */ +#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP 10T Full Dplx Capable */ +#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP 100TX Half Dplx Capable */ +#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP 100TX Full Dplx Capable */ + +/* 1000BASE-T Control Register */ +#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ +#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ +/* 1=Repeater/switch device port 0=DTE device */ +#define CR_1000T_REPEATER_DTE 0x0400 +/* 1=Configure PHY as Master 0=Configure PHY as Slave */ +#define CR_1000T_MS_VALUE 0x0800 +/* 1=Master/Slave manual config value 0=Automatic Master/Slave config */ +#define CR_1000T_MS_ENABLE 0x1000 +#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ + +/* 1000BASE-T Status Register */ +#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle err since last rd */ +#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asym pause direction bit */ +#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local Tx Master, 0=Slave */ +#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ + +#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 + +/* PHY 1000 MII Register/Bit Definitions */ +/* PHY Registers defined by IEEE */ +#define PHY_CONTROL 0x00 /* Control Register */ +#define PHY_STATUS 0x01 /* Status Register */ +#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ +#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ +#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ +#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ +#define PHY_NEXT_PAGE_TX 0x07 /* Next Page Tx */ +#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ +#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ +#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ + +#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */ + +/* NVM Control */ +#define E1000_EECD_SK 0x00000001 /* NVM Clock */ +#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */ +#define E1000_EECD_DI 0x00000004 /* NVM Data In */ +#define E1000_EECD_DO 0x00000008 /* NVM Data Out */ +#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */ +#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */ +#define E1000_EECD_PRES 0x00000100 /* NVM Present */ +#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */ +#define E1000_EECD_BLOCKED 0x00008000 /* Bit banging access blocked flag */ +#define E1000_EECD_ABORT 0x00010000 /* NVM operation aborted flag */ +#define E1000_EECD_TIMEOUT 0x00020000 /* NVM read operation timeout flag */ +#define E1000_EECD_ERROR_CLR 0x00040000 /* NVM error status clear bit */ +/* NVM Addressing bits based on type 0=small, 1=large */ +#define E1000_EECD_ADDR_BITS 0x00000400 +#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */ +#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */ +#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */ +#define E1000_EECD_SIZE_EX_SHIFT 11 +#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ +#define E1000_EECD_AUPDEN 0x00100000 /* Ena Auto FLASH update */ +#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ +#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES) +#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */ +#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done */ +#define E1000_EECD_FLASH_DETECTED_I210 0x00080000 /* FLASH detected */ +#define E1000_EECD_SEC1VAL_I210 0x02000000 /* Sector One Valid */ +#define E1000_FLUDONE_ATTEMPTS 20000 +#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */ +#define E1000_I210_FIFO_SEL_RX 0x00 +#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i)) +#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0) +#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06 +#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01 + +#define E1000_I210_FLASH_SECTOR_SIZE 0x1000 /* 4KB FLASH sector unit size */ +/* Secure FLASH mode requires removing MSb */ +#define E1000_I210_FW_PTR_MASK 0x7FFF +/* Firmware code revision field word offset*/ +#define E1000_I210_FW_VER_OFFSET 328 + +#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write regs */ +#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ +#define E1000_NVM_RW_REG_START 1 /* Start operation */ +#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */ +#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */ +#define E1000_FLASH_UPDATES 2000 + +/* NVM Word Offsets */ +#define NVM_COMPAT 0x0003 +#define NVM_ID_LED_SETTINGS 0x0004 +#define NVM_VERSION 0x0005 +#define E1000_I210_NVM_FW_MODULE_PTR 0x0010 +#define E1000_I350_NVM_FW_MODULE_PTR 0x0051 +#define NVM_FUTURE_INIT_WORD1 0x0019 +#define NVM_ETRACK_WORD 0x0042 +#define NVM_ETRACK_HIWORD 0x0043 +#define NVM_COMB_VER_OFF 0x0083 +#define NVM_COMB_VER_PTR 0x003d + +/* NVM version defines */ +#define NVM_MAJOR_MASK 0xF000 +#define NVM_MINOR_MASK 0x0FF0 +#define NVM_IMAGE_ID_MASK 0x000F +#define NVM_COMB_VER_MASK 0x00FF +#define NVM_MAJOR_SHIFT 12 +#define NVM_MINOR_SHIFT 4 +#define NVM_COMB_VER_SHFT 8 +#define NVM_VER_INVALID 0xFFFF +#define NVM_ETRACK_SHIFT 16 +#define NVM_ETRACK_VALID 0x8000 +#define NVM_NEW_DEC_MASK 0x0F00 +#define NVM_HEX_CONV 16 +#define NVM_HEX_TENS 10 + +/* FW version defines */ +/* Offset of "Loader patch ptr" in Firmware Header */ +#define E1000_I350_NVM_FW_LOADER_PATCH_PTR_OFFSET 0x01 +/* Patch generation hour & minutes */ +#define E1000_I350_NVM_FW_VER_WORD1_OFFSET 0x04 +/* Patch generation month & day */ +#define E1000_I350_NVM_FW_VER_WORD2_OFFSET 0x05 +/* Patch generation year */ +#define E1000_I350_NVM_FW_VER_WORD3_OFFSET 0x06 +/* Patch major & minor numbers */ +#define E1000_I350_NVM_FW_VER_WORD4_OFFSET 0x07 + +#define NVM_MAC_ADDR 0x0000 +#define NVM_SUB_DEV_ID 0x000B +#define NVM_SUB_VEN_ID 0x000C +#define NVM_DEV_ID 0x000D +#define NVM_VEN_ID 0x000E +#define NVM_INIT_CTRL_2 0x000F +#define NVM_INIT_CTRL_4 0x0013 +#define NVM_LED_1_CFG 0x001C +#define NVM_LED_0_2_CFG 0x001F + +#define NVM_COMPAT_VALID_CSUM 0x0001 +#define NVM_FUTURE_INIT_WORD1_VALID_CSUM 0x0040 + +#define NVM_ETS_CFG 0x003E +#define NVM_ETS_LTHRES_DELTA_MASK 0x07C0 +#define NVM_ETS_LTHRES_DELTA_SHIFT 6 +#define NVM_ETS_TYPE_MASK 0x0038 +#define NVM_ETS_TYPE_SHIFT 3 +#define NVM_ETS_TYPE_EMC 0x000 +#define NVM_ETS_NUM_SENSORS_MASK 0x0007 +#define NVM_ETS_DATA_LOC_MASK 0x3C00 +#define NVM_ETS_DATA_LOC_SHIFT 10 +#define NVM_ETS_DATA_INDEX_MASK 0x0300 +#define NVM_ETS_DATA_INDEX_SHIFT 8 +#define NVM_ETS_DATA_HTHRESH_MASK 0x00FF +#define NVM_INIT_CONTROL2_REG 0x000F +#define NVM_INIT_CONTROL3_PORT_B 0x0014 +#define NVM_INIT_3GIO_3 0x001A +#define NVM_SWDEF_PINS_CTRL_PORT_0 0x0020 +#define NVM_INIT_CONTROL3_PORT_A 0x0024 +#define NVM_CFG 0x0012 +#define NVM_ALT_MAC_ADDR_PTR 0x0037 +#define NVM_CHECKSUM_REG 0x003F +#define NVM_COMPATIBILITY_REG_3 0x0003 +#define NVM_COMPATIBILITY_BIT_MASK 0x8000 + +#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */ +#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */ +#define E1000_NVM_CFG_DONE_PORT_2 0x100000 /* ...for third port */ +#define E1000_NVM_CFG_DONE_PORT_3 0x200000 /* ...for fourth port */ + +#define NVM_82580_LAN_FUNC_OFFSET(a) ((a) ? (0x40 + (0x40 * (a))) : 0) + +/* Mask bits for fields in Word 0x24 of the NVM */ +#define NVM_WORD24_COM_MDIO 0x0008 /* MDIO interface shared */ +#define NVM_WORD24_EXT_MDIO 0x0004 /* MDIO accesses routed extrnl */ +/* Offset of Link Mode bits for 82575/82576 */ +#define NVM_WORD24_LNK_MODE_OFFSET 8 +/* Offset of Link Mode bits for 82580 up */ +#define NVM_WORD24_82580_LNK_MODE_OFFSET 4 + + +/* Mask bits for fields in Word 0x0f of the NVM */ +#define NVM_WORD0F_PAUSE_MASK 0x3000 +#define NVM_WORD0F_PAUSE 0x1000 +#define NVM_WORD0F_ASM_DIR 0x2000 + +/* Mask bits for fields in Word 0x1a of the NVM */ +#define NVM_WORD1A_ASPM_MASK 0x000C + +/* Mask bits for fields in Word 0x03 of the EEPROM */ +#define NVM_COMPAT_LOM 0x0800 + +/* length of string needed to store PBA number */ +#define E1000_PBANUM_LENGTH 11 + +/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */ +#define NVM_SUM 0xBABA + +/* PBA (printed board assembly) number words */ +#define NVM_PBA_OFFSET_0 8 +#define NVM_PBA_OFFSET_1 9 +#define NVM_PBA_PTR_GUARD 0xFAFA +#define NVM_RESERVED_WORD 0xFFFF +#define NVM_WORD_SIZE_BASE_SHIFT 6 + +/* NVM Commands - SPI */ +#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ +#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */ +#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */ +#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ +#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */ +#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */ + +/* SPI NVM Status Register */ +#define NVM_STATUS_RDY_SPI 0x01 + +/* Word definitions for ID LED Settings */ +#define ID_LED_RESERVED_0000 0x0000 +#define ID_LED_RESERVED_FFFF 0xFFFF +#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ + (ID_LED_OFF1_OFF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_DEF1_DEF2)) +#define ID_LED_DEF1_DEF2 0x1 +#define ID_LED_DEF1_ON2 0x2 +#define ID_LED_DEF1_OFF2 0x3 +#define ID_LED_ON1_DEF2 0x4 +#define ID_LED_ON1_ON2 0x5 +#define ID_LED_ON1_OFF2 0x6 +#define ID_LED_OFF1_DEF2 0x7 +#define ID_LED_OFF1_ON2 0x8 +#define ID_LED_OFF1_OFF2 0x9 + +#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF +#define IGP_ACTIVITY_LED_ENABLE 0x0300 +#define IGP_LED3_MODE 0x07000000 + +/* PCI/PCI-X/PCI-EX Config space */ +#define PCI_HEADER_TYPE_REGISTER 0x0E +#define PCIE_LINK_STATUS 0x12 +#define PCIE_DEVICE_CONTROL2 0x28 + +#define PCI_HEADER_TYPE_MULTIFUNC 0x80 +#define PCIE_LINK_WIDTH_MASK 0x3F0 +#define PCIE_LINK_WIDTH_SHIFT 4 +#define PCIE_LINK_SPEED_MASK 0x0F +#define PCIE_LINK_SPEED_2500 0x01 +#define PCIE_LINK_SPEED_5000 0x02 +#define PCIE_DEVICE_CONTROL2_16ms 0x0005 + +#ifndef ETH_ADDR_LEN +#define ETH_ADDR_LEN 6 +#endif + +#define PHY_REVISION_MASK 0xFFFFFFF0 +#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ +#define MAX_PHY_MULTI_PAGE_REG 0xF + +/* Bit definitions for valid PHY IDs. + * I = Integrated + * E = External + */ +#define M88E1000_E_PHY_ID 0x01410C50 +#define M88E1000_I_PHY_ID 0x01410C30 +#define M88E1011_I_PHY_ID 0x01410C20 +#define IGP01E1000_I_PHY_ID 0x02A80380 +#define M88E1111_I_PHY_ID 0x01410CC0 +#define M88E1543_E_PHY_ID 0x01410EA0 +#define M88E1112_E_PHY_ID 0x01410C90 +#define I347AT4_E_PHY_ID 0x01410DC0 +#define M88E1340M_E_PHY_ID 0x01410DF0 +#define GG82563_E_PHY_ID 0x01410CA0 +#define IGP03E1000_E_PHY_ID 0x02A80390 +#define IFE_E_PHY_ID 0x02A80330 +#define IFE_PLUS_E_PHY_ID 0x02A80320 +#define IFE_C_E_PHY_ID 0x02A80310 +#define I82580_I_PHY_ID 0x015403A0 +#define I350_I_PHY_ID 0x015403B0 +#define I210_I_PHY_ID 0x01410C00 +#define IGP04E1000_E_PHY_ID 0x02A80391 +#define M88_VENDOR 0x0141 + +/* M88E1000 Specific Registers */ +#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Reg */ +#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Reg */ +#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Cntrl */ +#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ + +#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for pg number setting */ +#define M88E1000_PHY_GEN_CONTROL 0x1E /* meaning depends on reg 29 */ + +/* M88E1000 PHY Specific Control Register */ +#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reverse enabled */ +/* MDI Crossover Mode bits 6:5 Manual MDI configuration */ +#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 +#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ +/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */ +#define M88E1000_PSCR_AUTO_X_1000T 0x0040 +/* Auto crossover enabled all speeds */ +#define M88E1000_PSCR_AUTO_X_MODE 0x0060 +#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Tx */ + +/* M88E1000 PHY Specific Status Register */ +#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ +#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ +#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ +/* 0 = <50M + * 1 = 50-80M + * 2 = 80-110M + * 3 = 110-140M + * 4 = >140M + */ +#define M88E1000_PSSR_CABLE_LENGTH 0x0380 +#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */ +#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ +#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ + +#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 + +/* Number of times we will attempt to autonegotiate before downshifting if we + * are the master + */ +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 +/* Number of times we will attempt to autonegotiate before downshifting if we + * are the slave + */ +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 +#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ + +/* Intel I347AT4 Registers */ +#define I347AT4_PCDL 0x10 /* PHY Cable Diagnostics Length */ +#define I347AT4_PCDC 0x15 /* PHY Cable Diagnostics Control */ +#define I347AT4_PAGE_SELECT 0x16 + +/* I347AT4 Extended PHY Specific Control Register */ + +/* Number of times we will attempt to autonegotiate before downshifting if we + * are the master + */ +#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800 +#define I347AT4_PSCR_DOWNSHIFT_MASK 0x7000 +#define I347AT4_PSCR_DOWNSHIFT_1X 0x0000 +#define I347AT4_PSCR_DOWNSHIFT_2X 0x1000 +#define I347AT4_PSCR_DOWNSHIFT_3X 0x2000 +#define I347AT4_PSCR_DOWNSHIFT_4X 0x3000 +#define I347AT4_PSCR_DOWNSHIFT_5X 0x4000 +#define I347AT4_PSCR_DOWNSHIFT_6X 0x5000 +#define I347AT4_PSCR_DOWNSHIFT_7X 0x6000 +#define I347AT4_PSCR_DOWNSHIFT_8X 0x7000 + +/* I347AT4 PHY Cable Diagnostics Control */ +#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */ + +/* M88E1112 only registers */ +#define M88E1112_VCT_DSP_DISTANCE 0x001A + +/* M88EC018 Rev 2 specific DownShift settings */ +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 + +/* Bits... + * 15-5: page + * 4-0: register offset + */ +#define GG82563_PAGE_SHIFT 5 +#define GG82563_REG(page, reg) \ + (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) +#define GG82563_MIN_ALT_REG 30 + +/* GG82563 Specific Registers */ +#define GG82563_PHY_SPEC_CTRL GG82563_REG(0, 16) /* PHY Spec Cntrl */ +#define GG82563_PHY_PAGE_SELECT GG82563_REG(0, 22) /* Page Select */ +#define GG82563_PHY_SPEC_CTRL_2 GG82563_REG(0, 26) /* PHY Spec Cntrl2 */ +#define GG82563_PHY_PAGE_SELECT_ALT GG82563_REG(0, 29) /* Alt Page Select */ + +/* MAC Specific Control Register */ +#define GG82563_PHY_MAC_SPEC_CTRL GG82563_REG(2, 21) + +#define GG82563_PHY_DSP_DISTANCE GG82563_REG(5, 26) /* DSP Distance */ + +/* Page 193 - Port Control Registers */ +/* Kumeran Mode Control */ +#define GG82563_PHY_KMRN_MODE_CTRL GG82563_REG(193, 16) +#define GG82563_PHY_PWR_MGMT_CTRL GG82563_REG(193, 20) /* Pwr Mgt Ctrl */ + +/* Page 194 - KMRN Registers */ +#define GG82563_PHY_INBAND_CTRL GG82563_REG(194, 18) /* Inband Ctrl */ + +/* MDI Control */ +#define E1000_MDIC_REG_MASK 0x001F0000 +#define E1000_MDIC_REG_SHIFT 16 +#define E1000_MDIC_PHY_MASK 0x03E00000 +#define E1000_MDIC_PHY_SHIFT 21 +#define E1000_MDIC_OP_WRITE 0x04000000 +#define E1000_MDIC_OP_READ 0x08000000 +#define E1000_MDIC_READY 0x10000000 +#define E1000_MDIC_ERROR 0x40000000 +#define E1000_MDIC_DEST 0x80000000 + +/* SerDes Control */ +#define E1000_GEN_CTL_READY 0x80000000 +#define E1000_GEN_CTL_ADDRESS_SHIFT 8 +#define E1000_GEN_POLL_TIMEOUT 640 + +/* LinkSec register fields */ +#define E1000_LSECTXCAP_SUM_MASK 0x00FF0000 +#define E1000_LSECTXCAP_SUM_SHIFT 16 +#define E1000_LSECRXCAP_SUM_MASK 0x00FF0000 +#define E1000_LSECRXCAP_SUM_SHIFT 16 + +#define E1000_LSECTXCTRL_EN_MASK 0x00000003 +#define E1000_LSECTXCTRL_DISABLE 0x0 +#define E1000_LSECTXCTRL_AUTH 0x1 +#define E1000_LSECTXCTRL_AUTH_ENCRYPT 0x2 +#define E1000_LSECTXCTRL_AISCI 0x00000020 +#define E1000_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00 +#define E1000_LSECTXCTRL_RSV_MASK 0x000000D8 + +#define E1000_LSECRXCTRL_EN_MASK 0x0000000C +#define E1000_LSECRXCTRL_EN_SHIFT 2 +#define E1000_LSECRXCTRL_DISABLE 0x0 +#define E1000_LSECRXCTRL_CHECK 0x1 +#define E1000_LSECRXCTRL_STRICT 0x2 +#define E1000_LSECRXCTRL_DROP 0x3 +#define E1000_LSECRXCTRL_PLSH 0x00000040 +#define E1000_LSECRXCTRL_RP 0x00000080 +#define E1000_LSECRXCTRL_RSV_MASK 0xFFFFFF33 + +/* Tx Rate-Scheduler Config fields */ +#define E1000_RTTBCNRC_RS_ENA 0x80000000 +#define E1000_RTTBCNRC_RF_DEC_MASK 0x00003FFF +#define E1000_RTTBCNRC_RF_INT_SHIFT 14 +#define E1000_RTTBCNRC_RF_INT_MASK \ + (E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT) + +/* DMA Coalescing register fields */ +/* DMA Coalescing Watchdog Timer */ +#define E1000_DMACR_DMACWT_MASK 0x00003FFF +/* DMA Coalescing Rx Threshold */ +#define E1000_DMACR_DMACTHR_MASK 0x00FF0000 +#define E1000_DMACR_DMACTHR_SHIFT 16 +/* Lx when no PCIe transactions */ +#define E1000_DMACR_DMAC_LX_MASK 0x30000000 +#define E1000_DMACR_DMAC_LX_SHIFT 28 +#define E1000_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */ +/* DMA Coalescing BMC-to-OS Watchdog Enable */ +#define E1000_DMACR_DC_BMC2OSW_EN 0x00008000 + +/* DMA Coalescing Transmit Threshold */ +#define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF + +#define E1000_DMCTLX_TTLX_MASK 0x00000FFF /* Time to LX request */ + +/* Rx Traffic Rate Threshold */ +#define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF +/* Rx packet rate in current window */ +#define E1000_DMCRTRH_LRPRCW 0x80000000 + +/* DMA Coal Rx Traffic Current Count */ +#define E1000_DMCCNT_CCOUNT_MASK 0x01FFFFFF + +/* Flow ctrl Rx Threshold High val */ +#define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 +#define E1000_FCRTC_RTH_COAL_SHIFT 4 +/* Lx power decision based on DMA coal */ +#define E1000_PCIEMISC_LX_DECISION 0x00000080 + +#define E1000_RXPBS_CFG_TS_EN 0x80000000 /* Timestamp in Rx buffer */ +#define E1000_RXPBS_SIZE_I210_MASK 0x0000003F /* Rx packet buffer size */ +#define E1000_TXPB0S_SIZE_I210_MASK 0x0000003F /* Tx packet buffer 0 size */ + +/* Proxy Filter Control */ +#define E1000_PROXYFC_D0 0x00000001 /* Enable offload in D0 */ +#define E1000_PROXYFC_EX 0x00000004 /* Directed exact proxy */ +#define E1000_PROXYFC_MC 0x00000008 /* Directed MC Proxy */ +#define E1000_PROXYFC_BC 0x00000010 /* Broadcast Proxy Enable */ +#define E1000_PROXYFC_ARP_DIRECTED 0x00000020 /* Directed ARP Proxy Ena */ +#define E1000_PROXYFC_IPV4 0x00000040 /* Directed IPv4 Enable */ +#define E1000_PROXYFC_IPV6 0x00000080 /* Directed IPv6 Enable */ +#define E1000_PROXYFC_NS 0x00000200 /* IPv6 Neighbor Solicitation */ +#define E1000_PROXYFC_ARP 0x00000800 /* ARP Request Proxy Ena */ +/* Proxy Status */ +#define E1000_PROXYS_CLEAR 0xFFFFFFFF /* Clear */ + +/* Firmware Status */ +#define E1000_FWSTS_FWRI 0x80000000 /* FW Reset Indication */ +/* VF Control */ +#define E1000_VTCTRL_RST 0x04000000 /* Reset VF */ + +#define E1000_STATUS_LAN_ID_MASK 0x00000000C /* Mask for Lan ID field */ +/* Lan ID bit field offset in status register */ +#define E1000_STATUS_LAN_ID_OFFSET 2 +#define E1000_VFTA_ENTRIES 128 +#ifndef E1000_UNUSEDARG +#define E1000_UNUSEDARG +#endif /* E1000_UNUSEDARG */ +#endif /* _E1000_DEFINES_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_hw.h b/kernel/linux/kni/ethtool/igb/e1000_hw.h new file mode 100644 index 00000000..ed43ef5a --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_hw.h @@ -0,0 +1,778 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_HW_H_ +#define _E1000_HW_H_ + +#include "e1000_osdep.h" +#include "e1000_regs.h" +#include "e1000_defines.h" + +struct e1000_hw; + +#define E1000_DEV_ID_82576 0x10C9 +#define E1000_DEV_ID_82576_FIBER 0x10E6 +#define E1000_DEV_ID_82576_SERDES 0x10E7 +#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 +#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526 +#define E1000_DEV_ID_82576_NS 0x150A +#define E1000_DEV_ID_82576_NS_SERDES 0x1518 +#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D +#define E1000_DEV_ID_82575EB_COPPER 0x10A7 +#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 +#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 +#define E1000_DEV_ID_82580_COPPER 0x150E +#define E1000_DEV_ID_82580_FIBER 0x150F +#define E1000_DEV_ID_82580_SERDES 0x1510 +#define E1000_DEV_ID_82580_SGMII 0x1511 +#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516 +#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527 +#define E1000_DEV_ID_I350_COPPER 0x1521 +#define E1000_DEV_ID_I350_FIBER 0x1522 +#define E1000_DEV_ID_I350_SERDES 0x1523 +#define E1000_DEV_ID_I350_SGMII 0x1524 +#define E1000_DEV_ID_I350_DA4 0x1546 +#define E1000_DEV_ID_I210_COPPER 0x1533 +#define E1000_DEV_ID_I210_COPPER_OEM1 0x1534 +#define E1000_DEV_ID_I210_COPPER_IT 0x1535 +#define E1000_DEV_ID_I210_FIBER 0x1536 +#define E1000_DEV_ID_I210_SERDES 0x1537 +#define E1000_DEV_ID_I210_SGMII 0x1538 +#define E1000_DEV_ID_I210_COPPER_FLASHLESS 0x157B +#define E1000_DEV_ID_I210_SERDES_FLASHLESS 0x157C +#define E1000_DEV_ID_I211_COPPER 0x1539 +#define E1000_DEV_ID_I354_BACKPLANE_1GBPS 0x1F40 +#define E1000_DEV_ID_I354_SGMII 0x1F41 +#define E1000_DEV_ID_I354_BACKPLANE_2_5GBPS 0x1F45 +#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438 +#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A +#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C +#define E1000_DEV_ID_DH89XXCC_SFP 0x0440 + +#define E1000_REVISION_0 0 +#define E1000_REVISION_1 1 +#define E1000_REVISION_2 2 +#define E1000_REVISION_3 3 +#define E1000_REVISION_4 4 + +#define E1000_FUNC_0 0 +#define E1000_FUNC_1 1 +#define E1000_FUNC_2 2 +#define E1000_FUNC_3 3 + +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2 6 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3 9 + +enum e1000_mac_type { + e1000_undefined = 0, + e1000_82575, + e1000_82576, + e1000_82580, + e1000_i350, + e1000_i354, + e1000_i210, + e1000_i211, + e1000_num_macs /* List is 1-based, so subtract 1 for true count. */ +}; + +enum e1000_media_type { + e1000_media_type_unknown = 0, + e1000_media_type_copper = 1, + e1000_media_type_fiber = 2, + e1000_media_type_internal_serdes = 3, + e1000_num_media_types +}; + +enum e1000_nvm_type { + e1000_nvm_unknown = 0, + e1000_nvm_none, + e1000_nvm_eeprom_spi, + e1000_nvm_flash_hw, + e1000_nvm_invm, + e1000_nvm_flash_sw +}; + +enum e1000_nvm_override { + e1000_nvm_override_none = 0, + e1000_nvm_override_spi_small, + e1000_nvm_override_spi_large, +}; + +enum e1000_phy_type { + e1000_phy_unknown = 0, + e1000_phy_none, + e1000_phy_m88, + e1000_phy_igp, + e1000_phy_igp_2, + e1000_phy_gg82563, + e1000_phy_igp_3, + e1000_phy_ife, + e1000_phy_82580, + e1000_phy_vf, + e1000_phy_i210, +}; + +enum e1000_bus_type { + e1000_bus_type_unknown = 0, + e1000_bus_type_pci, + e1000_bus_type_pcix, + e1000_bus_type_pci_express, + e1000_bus_type_reserved +}; + +enum e1000_bus_speed { + e1000_bus_speed_unknown = 0, + e1000_bus_speed_33, + e1000_bus_speed_66, + e1000_bus_speed_100, + e1000_bus_speed_120, + e1000_bus_speed_133, + e1000_bus_speed_2500, + e1000_bus_speed_5000, + e1000_bus_speed_reserved +}; + +enum e1000_bus_width { + e1000_bus_width_unknown = 0, + e1000_bus_width_pcie_x1, + e1000_bus_width_pcie_x2, + e1000_bus_width_pcie_x4 = 4, + e1000_bus_width_pcie_x8 = 8, + e1000_bus_width_32, + e1000_bus_width_64, + e1000_bus_width_reserved +}; + +enum e1000_1000t_rx_status { + e1000_1000t_rx_status_not_ok = 0, + e1000_1000t_rx_status_ok, + e1000_1000t_rx_status_undefined = 0xFF +}; + +enum e1000_rev_polarity { + e1000_rev_polarity_normal = 0, + e1000_rev_polarity_reversed, + e1000_rev_polarity_undefined = 0xFF +}; + +enum e1000_fc_mode { + e1000_fc_none = 0, + e1000_fc_rx_pause, + e1000_fc_tx_pause, + e1000_fc_full, + e1000_fc_default = 0xFF +}; + +enum e1000_ms_type { + e1000_ms_hw_default = 0, + e1000_ms_force_master, + e1000_ms_force_slave, + e1000_ms_auto +}; + +enum e1000_smart_speed { + e1000_smart_speed_default = 0, + e1000_smart_speed_on, + e1000_smart_speed_off +}; + +enum e1000_serdes_link_state { + e1000_serdes_link_down = 0, + e1000_serdes_link_autoneg_progress, + e1000_serdes_link_autoneg_complete, + e1000_serdes_link_forced_up +}; + +#ifndef __le16 +#define __le16 u16 +#endif +#ifndef __le32 +#define __le32 u32 +#endif +#ifndef __le64 +#define __le64 u64 +#endif +/* Receive Descriptor */ +struct e1000_rx_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + __le16 length; /* Length of data DMAed into data buffer */ + __le16 csum; /* Packet checksum */ + u8 status; /* Descriptor status */ + u8 errors; /* Descriptor Errors */ + __le16 special; +}; + +/* Receive Descriptor - Extended */ +union e1000_rx_desc_extended { + struct { + __le64 buffer_addr; + __le64 reserved; + } read; + struct { + struct { + __le32 mrq; /* Multiple Rx Queues */ + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length; + __le16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define MAX_PS_BUFFERS 4 + +/* Number of packet split data buffers (not including the header buffer) */ +#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1) + +/* Receive Descriptor - Packet Split */ +union e1000_rx_desc_packet_split { + struct { + /* one buffer for protocol header(s), three data buffers */ + __le64 buffer_addr[MAX_PS_BUFFERS]; + } read; + struct { + struct { + __le32 mrq; /* Multiple Rx Queues */ + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length0; /* length of buffer 0 */ + __le16 vlan; /* VLAN tag */ + } middle; + struct { + __le16 header_status; + /* length of buffers 1-3 */ + __le16 length[PS_PAGE_BUFFERS]; + } upper; + __le64 reserved; + } wb; /* writeback */ +}; + +/* Transmit Descriptor */ +struct e1000_tx_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + union { + __le32 data; + struct { + __le16 length; /* Data buffer length */ + u8 cso; /* Checksum offset */ + u8 cmd; /* Descriptor control */ + } flags; + } lower; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 css; /* Checksum start */ + __le16 special; + } fields; + } upper; +}; + +/* Offload Context Descriptor */ +struct e1000_context_desc { + union { + __le32 ip_config; + struct { + u8 ipcss; /* IP checksum start */ + u8 ipcso; /* IP checksum offset */ + __le16 ipcse; /* IP checksum end */ + } ip_fields; + } lower_setup; + union { + __le32 tcp_config; + struct { + u8 tucss; /* TCP checksum start */ + u8 tucso; /* TCP checksum offset */ + __le16 tucse; /* TCP checksum end */ + } tcp_fields; + } upper_setup; + __le32 cmd_and_length; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 hdr_len; /* Header length */ + __le16 mss; /* Maximum segment size */ + } fields; + } tcp_seg_setup; +}; + +/* Offload data descriptor */ +struct e1000_data_desc { + __le64 buffer_addr; /* Address of the descriptor's buffer address */ + union { + __le32 data; + struct { + __le16 length; /* Data buffer length */ + u8 typ_len_ext; + u8 cmd; + } flags; + } lower; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 popts; /* Packet Options */ + __le16 special; + } fields; + } upper; +}; + +/* Statistics counters collected by the MAC */ +struct e1000_hw_stats { + u64 crcerrs; + u64 algnerrc; + u64 symerrs; + u64 rxerrc; + u64 mpc; + u64 scc; + u64 ecol; + u64 mcc; + u64 latecol; + u64 colc; + u64 dc; + u64 tncrs; + u64 sec; + u64 cexterr; + u64 rlec; + u64 xonrxc; + u64 xontxc; + u64 xoffrxc; + u64 xofftxc; + u64 fcruc; + u64 prc64; + u64 prc127; + u64 prc255; + u64 prc511; + u64 prc1023; + u64 prc1522; + u64 gprc; + u64 bprc; + u64 mprc; + u64 gptc; + u64 gorc; + u64 gotc; + u64 rnbc; + u64 ruc; + u64 rfc; + u64 roc; + u64 rjc; + u64 mgprc; + u64 mgpdc; + u64 mgptc; + u64 tor; + u64 tot; + u64 tpr; + u64 tpt; + u64 ptc64; + u64 ptc127; + u64 ptc255; + u64 ptc511; + u64 ptc1023; + u64 ptc1522; + u64 mptc; + u64 bptc; + u64 tsctc; + u64 tsctfc; + u64 iac; + u64 icrxptc; + u64 icrxatc; + u64 ictxptc; + u64 ictxatc; + u64 ictxqec; + u64 ictxqmtc; + u64 icrxdmtc; + u64 icrxoc; + u64 cbtmpc; + u64 htdpmc; + u64 cbrdpc; + u64 cbrmpc; + u64 rpthc; + u64 hgptc; + u64 htcbdpc; + u64 hgorc; + u64 hgotc; + u64 lenerrs; + u64 scvpc; + u64 hrmpc; + u64 doosync; + u64 o2bgptc; + u64 o2bspc; + u64 b2ospc; + u64 b2ogprc; +}; + + +struct e1000_phy_stats { + u32 idle_errors; + u32 receive_errors; +}; + +struct e1000_host_mng_dhcp_cookie { + u32 signature; + u8 status; + u8 reserved0; + u16 vlan_id; + u32 reserved1; + u16 reserved2; + u8 reserved3; + u8 checksum; +}; + +/* Host Interface "Rev 1" */ +struct e1000_host_command_header { + u8 command_id; + u8 command_length; + u8 command_options; + u8 checksum; +}; + +#define E1000_HI_MAX_DATA_LENGTH 252 +struct e1000_host_command_info { + struct e1000_host_command_header command_header; + u8 command_data[E1000_HI_MAX_DATA_LENGTH]; +}; + +/* Host Interface "Rev 2" */ +struct e1000_host_mng_command_header { + u8 command_id; + u8 checksum; + u16 reserved1; + u16 reserved2; + u16 command_length; +}; + +#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 +struct e1000_host_mng_command_info { + struct e1000_host_mng_command_header command_header; + u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; +}; + +#include "e1000_mac.h" +#include "e1000_phy.h" +#include "e1000_nvm.h" +#include "e1000_manage.h" +#include "e1000_mbx.h" + +/* Function pointers for the MAC. */ +struct e1000_mac_operations { + s32 (*init_params)(struct e1000_hw *); + s32 (*id_led_init)(struct e1000_hw *); + s32 (*blink_led)(struct e1000_hw *); + bool (*check_mng_mode)(struct e1000_hw *); + s32 (*check_for_link)(struct e1000_hw *); + s32 (*cleanup_led)(struct e1000_hw *); + void (*clear_hw_cntrs)(struct e1000_hw *); + void (*clear_vfta)(struct e1000_hw *); + s32 (*get_bus_info)(struct e1000_hw *); + void (*set_lan_id)(struct e1000_hw *); + s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *); + s32 (*led_on)(struct e1000_hw *); + s32 (*led_off)(struct e1000_hw *); + void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32); + s32 (*reset_hw)(struct e1000_hw *); + s32 (*init_hw)(struct e1000_hw *); + void (*shutdown_serdes)(struct e1000_hw *); + void (*power_up_serdes)(struct e1000_hw *); + s32 (*setup_link)(struct e1000_hw *); + s32 (*setup_physical_interface)(struct e1000_hw *); + s32 (*setup_led)(struct e1000_hw *); + void (*write_vfta)(struct e1000_hw *, u32, u32); + void (*config_collision_dist)(struct e1000_hw *); + void (*rar_set)(struct e1000_hw *, u8*, u32); + s32 (*read_mac_addr)(struct e1000_hw *); + s32 (*validate_mdi_setting)(struct e1000_hw *); + s32 (*get_thermal_sensor_data)(struct e1000_hw *); + s32 (*init_thermal_sensor_thresh)(struct e1000_hw *); + s32 (*acquire_swfw_sync)(struct e1000_hw *, u16); + void (*release_swfw_sync)(struct e1000_hw *, u16); +}; + +/* When to use various PHY register access functions: + * + * Func Caller + * Function Does Does When to use + * ~~~~~~~~~~~~ ~~~~~ ~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * X_reg L,P,A n/a for simple PHY reg accesses + * X_reg_locked P,A L for multiple accesses of different regs + * on different pages + * X_reg_page A L,P for multiple accesses of different regs + * on the same page + * + * Where X=[read|write], L=locking, P=sets page, A=register access + * + */ +struct e1000_phy_operations { + s32 (*init_params)(struct e1000_hw *); + s32 (*acquire)(struct e1000_hw *); + s32 (*check_polarity)(struct e1000_hw *); + s32 (*check_reset_block)(struct e1000_hw *); + s32 (*commit)(struct e1000_hw *); + s32 (*force_speed_duplex)(struct e1000_hw *); + s32 (*get_cfg_done)(struct e1000_hw *hw); + s32 (*get_cable_length)(struct e1000_hw *); + s32 (*get_info)(struct e1000_hw *); + s32 (*set_page)(struct e1000_hw *, u16); + s32 (*read_reg)(struct e1000_hw *, u32, u16 *); + s32 (*read_reg_locked)(struct e1000_hw *, u32, u16 *); + s32 (*read_reg_page)(struct e1000_hw *, u32, u16 *); + void (*release)(struct e1000_hw *); + s32 (*reset)(struct e1000_hw *); + s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); + s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); + s32 (*write_reg)(struct e1000_hw *, u32, u16); + s32 (*write_reg_locked)(struct e1000_hw *, u32, u16); + s32 (*write_reg_page)(struct e1000_hw *, u32, u16); + void (*power_up)(struct e1000_hw *); + void (*power_down)(struct e1000_hw *); + s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *); + s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8); +}; + +/* Function pointers for the NVM. */ +struct e1000_nvm_operations { + s32 (*init_params)(struct e1000_hw *); + s32 (*acquire)(struct e1000_hw *); + s32 (*read)(struct e1000_hw *, u16, u16, u16 *); + void (*release)(struct e1000_hw *); + void (*reload)(struct e1000_hw *); + s32 (*update)(struct e1000_hw *); + s32 (*valid_led_default)(struct e1000_hw *, u16 *); + s32 (*validate)(struct e1000_hw *); + s32 (*write)(struct e1000_hw *, u16, u16, u16 *); +}; + +#define E1000_MAX_SENSORS 3 + +struct e1000_thermal_diode_data { + u8 location; + u8 temp; + u8 caution_thresh; + u8 max_op_thresh; +}; + +struct e1000_thermal_sensor_data { + struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS]; +}; + +struct e1000_mac_info { + struct e1000_mac_operations ops; + u8 addr[ETH_ADDR_LEN]; + u8 perm_addr[ETH_ADDR_LEN]; + + enum e1000_mac_type type; + + u32 collision_delta; + u32 ledctl_default; + u32 ledctl_mode1; + u32 ledctl_mode2; + u32 mc_filter_type; + u32 tx_packet_delta; + u32 txcw; + + u16 current_ifs_val; + u16 ifs_max_val; + u16 ifs_min_val; + u16 ifs_ratio; + u16 ifs_step_size; + u16 mta_reg_count; + u16 uta_reg_count; + + /* Maximum size of the MTA register table in all supported adapters */ + #define MAX_MTA_REG 128 + u32 mta_shadow[MAX_MTA_REG]; + u16 rar_entry_count; + + u8 forced_speed_duplex; + + bool adaptive_ifs; + bool has_fwsm; + bool arc_subsystem_valid; + bool asf_firmware_present; + bool autoneg; + bool autoneg_failed; + bool get_link_status; + bool in_ifs_mode; + enum e1000_serdes_link_state serdes_link_state; + bool serdes_has_link; + bool tx_pkt_filtering; + struct e1000_thermal_sensor_data thermal_sensor_data; +}; + +struct e1000_phy_info { + struct e1000_phy_operations ops; + enum e1000_phy_type type; + + enum e1000_1000t_rx_status local_rx; + enum e1000_1000t_rx_status remote_rx; + enum e1000_ms_type ms_type; + enum e1000_ms_type original_ms_type; + enum e1000_rev_polarity cable_polarity; + enum e1000_smart_speed smart_speed; + + u32 addr; + u32 id; + u32 reset_delay_us; /* in usec */ + u32 revision; + + enum e1000_media_type media_type; + + u16 autoneg_advertised; + u16 autoneg_mask; + u16 cable_length; + u16 max_cable_length; + u16 min_cable_length; + + u8 mdix; + + bool disable_polarity_correction; + bool is_mdix; + bool polarity_correction; + bool reset_disable; + bool speed_downgraded; + bool autoneg_wait_to_complete; +}; + +struct e1000_nvm_info { + struct e1000_nvm_operations ops; + enum e1000_nvm_type type; + enum e1000_nvm_override override; + + u32 flash_bank_size; + u32 flash_base_addr; + + u16 word_size; + u16 delay_usec; + u16 address_bits; + u16 opcode_bits; + u16 page_size; +}; + +struct e1000_bus_info { + enum e1000_bus_type type; + enum e1000_bus_speed speed; + enum e1000_bus_width width; + + u16 func; + u16 pci_cmd_word; +}; + +struct e1000_fc_info { + u32 high_water; /* Flow control high-water mark */ + u32 low_water; /* Flow control low-water mark */ + u16 pause_time; /* Flow control pause timer */ + u16 refresh_time; /* Flow control refresh timer */ + bool send_xon; /* Flow control send XON */ + bool strict_ieee; /* Strict IEEE mode */ + enum e1000_fc_mode current_mode; /* FC mode in effect */ + enum e1000_fc_mode requested_mode; /* FC mode requested by caller */ +}; + +struct e1000_mbx_operations { + s32 (*init_params)(struct e1000_hw *hw); + s32 (*read)(struct e1000_hw *, u32 *, u16, u16); + s32 (*write)(struct e1000_hw *, u32 *, u16, u16); + s32 (*read_posted)(struct e1000_hw *, u32 *, u16, u16); + s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16); + s32 (*check_for_msg)(struct e1000_hw *, u16); + s32 (*check_for_ack)(struct e1000_hw *, u16); + s32 (*check_for_rst)(struct e1000_hw *, u16); +}; + +struct e1000_mbx_stats { + u32 msgs_tx; + u32 msgs_rx; + + u32 acks; + u32 reqs; + u32 rsts; +}; + +struct e1000_mbx_info { + struct e1000_mbx_operations ops; + struct e1000_mbx_stats stats; + u32 timeout; + u32 usec_delay; + u16 size; +}; + +struct e1000_dev_spec_82575 { + bool sgmii_active; + bool global_device_reset; + bool eee_disable; + bool module_plugged; + bool clear_semaphore_once; + u32 mtu; + struct sfp_e1000_flags eth_flags; + u8 media_port; + bool media_changed; +}; + +struct e1000_dev_spec_vf { + u32 vf_number; + u32 v2p_mailbox; +}; + +struct e1000_hw { + void *back; + + u8 __iomem *hw_addr; + u8 __iomem *flash_address; + unsigned long io_base; + + struct e1000_mac_info mac; + struct e1000_fc_info fc; + struct e1000_phy_info phy; + struct e1000_nvm_info nvm; + struct e1000_bus_info bus; + struct e1000_mbx_info mbx; + struct e1000_host_mng_dhcp_cookie mng_cookie; + + union { + struct e1000_dev_spec_82575 _82575; + struct e1000_dev_spec_vf vf; + } dev_spec; + + u16 device_id; + u16 subsystem_vendor_id; + u16 subsystem_device_id; + u16 vendor_id; + + u8 revision_id; +}; + +#include "e1000_82575.h" +#include "e1000_i210.h" + +/* These functions must be implemented by drivers */ +s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); +s32 e1000_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); + +#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_i210.c b/kernel/linux/kni/ethtool/igb/e1000_i210.c new file mode 100644 index 00000000..a4fabc3a --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_i210.c @@ -0,0 +1,894 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_api.h" + + +static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw); +static void e1000_release_nvm_i210(struct e1000_hw *hw); +static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw); +static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +static s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw); +static s32 e1000_valid_led_default_i210(struct e1000_hw *hw, u16 *data); + +/** + * e1000_acquire_nvm_i210 - Request for access to EEPROM + * @hw: pointer to the HW structure + * + * Acquire the necessary semaphores for exclusive access to the EEPROM. + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -E1000_ERR_NVM (-1). + **/ +static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_acquire_nvm_i210"); + + ret_val = e1000_acquire_swfw_sync_i210(hw, E1000_SWFW_EEP_SM); + + return ret_val; +} + +/** + * e1000_release_nvm_i210 - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit, + * then release the semaphores acquired. + **/ +static void e1000_release_nvm_i210(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_release_nvm_i210"); + + e1000_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM); +} + +/** + * e1000_acquire_swfw_sync_i210 - Acquire SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Acquire the SW/FW semaphore to access the PHY or NVM. The mask + * will also specify which port we're acquiring the lock for. + **/ +s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + u32 fwmask = mask << 16; + s32 ret_val = E1000_SUCCESS; + s32 i = 0, timeout = 200; /* FIXME: find real value to use here */ + + DEBUGFUNC("e1000_acquire_swfw_sync_i210"); + + while (i < timeout) { + if (e1000_get_hw_semaphore_i210(hw)) { + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); + if (!(swfw_sync & (fwmask | swmask))) + break; + + /* + * Firmware currently using resource (fwmask) + * or other software thread using resource (swmask) + */ + e1000_put_hw_semaphore_generic(hw); + msec_delay_irq(5); + i++; + } + + if (i == timeout) { + DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n"); + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync |= swmask; + E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); + + e1000_put_hw_semaphore_generic(hw); + +out: + return ret_val; +} + +/** + * e1000_release_swfw_sync_i210 - Release SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Release the SW/FW semaphore used to access the PHY or NVM. The mask + * will also specify which port we're releasing the lock for. + **/ +void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + + DEBUGFUNC("e1000_release_swfw_sync_i210"); + + while (e1000_get_hw_semaphore_i210(hw) != E1000_SUCCESS) + ; /* Empty */ + + swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); + swfw_sync &= ~mask; + E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); + + e1000_put_hw_semaphore_generic(hw); +} + +/** + * e1000_get_hw_semaphore_i210 - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore to access the PHY or NVM + **/ +static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw) +{ + u32 swsm; + s32 timeout = hw->nvm.word_size + 1; + s32 i = 0; + + DEBUGFUNC("e1000_get_hw_semaphore_i210"); + + /* Get the SW semaphore */ + while (i < timeout) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + if (!(swsm & E1000_SWSM_SMBI)) + break; + + usec_delay(50); + i++; + } + + if (i == timeout) { + /* In rare circumstances, the SW semaphore may already be held + * unintentionally. Clear the semaphore once before giving up. + */ + if (hw->dev_spec._82575.clear_semaphore_once) { + hw->dev_spec._82575.clear_semaphore_once = false; + e1000_put_hw_semaphore_generic(hw); + for (i = 0; i < timeout; i++) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + if (!(swsm & E1000_SWSM_SMBI)) + break; + + usec_delay(50); + } + } + + /* If we do not have the semaphore here, we have to give up. */ + if (i == timeout) { + DEBUGOUT("Driver can't access device - SMBI bit is set.\n"); + return -E1000_ERR_NVM; + } + } + + /* Get the FW semaphore. */ + for (i = 0; i < timeout; i++) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI); + + /* Semaphore acquired if bit latched */ + if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI) + break; + + usec_delay(50); + } + + if (i == timeout) { + /* Release semaphores */ + e1000_put_hw_semaphore_generic(hw); + DEBUGOUT("Driver can't access the NVM\n"); + return -E1000_ERR_NVM; + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_nvm_srrd_i210 - Reads Shadow Ram using EERD register + * @hw: pointer to the HW structure + * @offset: offset of word in the Shadow Ram to read + * @words: number of words to read + * @data: word read from the Shadow Ram + * + * Reads a 16 bit word from the Shadow Ram using the EERD register. + * Uses necessary synchronization semaphores. + **/ +s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 status = E1000_SUCCESS; + u16 i, count; + + DEBUGFUNC("e1000_read_nvm_srrd_i210"); + + /* We cannot hold synchronization semaphores for too long, + * because of forceful takeover procedure. However it is more efficient + * to read in bursts than synchronizing access for each word. */ + for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) { + count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ? + E1000_EERD_EEWR_MAX_COUNT : (words - i); + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + status = e1000_read_nvm_eerd(hw, offset, count, + data + i); + hw->nvm.ops.release(hw); + } else { + status = E1000_ERR_SWFW_SYNC; + } + + if (status != E1000_SUCCESS) + break; + } + + return status; +} + +/** + * e1000_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow RAM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow RAM + * + * Writes data to Shadow RAM at offset using EEWR register. + * + * If e1000_update_nvm_checksum is not called after this function , the + * data will not be committed to FLASH and also Shadow RAM will most likely + * contain an invalid checksum. + * + * If error code is returned, data and Shadow RAM may be inconsistent - buffer + * partially written. + **/ +s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 status = E1000_SUCCESS; + u16 i, count; + + DEBUGFUNC("e1000_write_nvm_srwr_i210"); + + /* We cannot hold synchronization semaphores for too long, + * because of forceful takeover procedure. However it is more efficient + * to write in bursts than synchronizing access for each word. */ + for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) { + count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ? + E1000_EERD_EEWR_MAX_COUNT : (words - i); + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + status = e1000_write_nvm_srwr(hw, offset, count, + data + i); + hw->nvm.ops.release(hw); + } else { + status = E1000_ERR_SWFW_SYNC; + } + + if (status != E1000_SUCCESS) + break; + } + + return status; +} + +/** + * e1000_write_nvm_srwr - Write to Shadow Ram using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow Ram to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow Ram + * + * Writes data to Shadow Ram at offset using EEWR register. + * + * If e1000_update_nvm_checksum is not called after this function , the + * Shadow Ram will most likely contain an invalid checksum. + **/ +static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i, k, eewr = 0; + u32 attempts = 100000; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_write_nvm_srwr"); + + /* + * A check for invalid values: offset too large, too many words, + * too many words for the offset, and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + + for (i = 0; i < words; i++) { + eewr = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) | + (data[i] << E1000_NVM_RW_REG_DATA) | + E1000_NVM_RW_REG_START; + + E1000_WRITE_REG(hw, E1000_SRWR, eewr); + + for (k = 0; k < attempts; k++) { + if (E1000_NVM_RW_REG_DONE & + E1000_READ_REG(hw, E1000_SRWR)) { + ret_val = E1000_SUCCESS; + break; + } + usec_delay(5); + } + + if (ret_val != E1000_SUCCESS) { + DEBUGOUT("Shadow RAM write EEWR timed out\n"); + break; + } + } + +out: + return ret_val; +} + +/** e1000_read_invm_word_i210 - Reads OTP + * @hw: pointer to the HW structure + * @address: the word address (aka eeprom offset) to read + * @data: pointer to the data read + * + * Reads 16-bit words from the OTP. Return error when the word is not + * stored in OTP. + **/ +static s32 e1000_read_invm_word_i210(struct e1000_hw *hw, u8 address, u16 *data) +{ + s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND; + u32 invm_dword; + u16 i; + u8 record_type, word_address; + + DEBUGFUNC("e1000_read_invm_word_i210"); + + for (i = 0; i < E1000_INVM_SIZE; i++) { + invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i)); + /* Get record type */ + record_type = INVM_DWORD_TO_RECORD_TYPE(invm_dword); + if (record_type == E1000_INVM_UNINITIALIZED_STRUCTURE) + break; + if (record_type == E1000_INVM_CSR_AUTOLOAD_STRUCTURE) + i += E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS; + if (record_type == E1000_INVM_RSA_KEY_SHA256_STRUCTURE) + i += E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS; + if (record_type == E1000_INVM_WORD_AUTOLOAD_STRUCTURE) { + word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword); + if (word_address == address) { + *data = INVM_DWORD_TO_WORD_DATA(invm_dword); + DEBUGOUT2("Read INVM Word 0x%02x = %x", + address, *data); + status = E1000_SUCCESS; + break; + } + } + } + if (status != E1000_SUCCESS) + DEBUGOUT1("Requested word 0x%02x not found in OTP\n", address); + return status; +} + +/** e1000_read_invm_i210 - Read invm wrapper function for I210/I211 + * @hw: pointer to the HW structure + * @address: the word address (aka eeprom offset) to read + * @data: pointer to the data read + * + * Wrapper function to return data formerly found in the NVM. + **/ +static s32 e1000_read_invm_i210(struct e1000_hw *hw, u16 offset, + u16 E1000_UNUSEDARG words, u16 *data) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_read_invm_i210"); + + /* Only the MAC addr is required to be present in the iNVM */ + switch (offset) { + case NVM_MAC_ADDR: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, &data[0]); + ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+1, + &data[1]); + ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+2, + &data[2]); + if (ret_val != E1000_SUCCESS) + DEBUGOUT("MAC Addr not found in iNVM\n"); + break; + case NVM_INIT_CTRL_2: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_INIT_CTRL_2_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; + case NVM_INIT_CTRL_4: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_INIT_CTRL_4_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; + case NVM_LED_1_CFG: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_LED_1_CFG_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; + case NVM_LED_0_2_CFG: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_LED_0_2_CFG_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; + case NVM_ID_LED_SETTINGS: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = ID_LED_RESERVED_FFFF; + ret_val = E1000_SUCCESS; + } + break; + case NVM_SUB_DEV_ID: + *data = hw->subsystem_device_id; + break; + case NVM_SUB_VEN_ID: + *data = hw->subsystem_vendor_id; + break; + case NVM_DEV_ID: + *data = hw->device_id; + break; + case NVM_VEN_ID: + *data = hw->vendor_id; + break; + default: + DEBUGOUT1("NVM word 0x%02x is not mapped.\n", offset); + *data = NVM_RESERVED_WORD; + break; + } + return ret_val; +} + +/** + * e1000_read_invm_version - Reads iNVM version and image type + * @hw: pointer to the HW structure + * @invm_ver: version structure for the version read + * + * Reads iNVM version and image type. + **/ +s32 e1000_read_invm_version(struct e1000_hw *hw, + struct e1000_fw_version *invm_ver) +{ + u32 *record = NULL; + u32 *next_record = NULL; + u32 i = 0; + u32 invm_dword = 0; + u32 invm_blocks = E1000_INVM_SIZE - (E1000_INVM_ULT_BYTES_SIZE / + E1000_INVM_RECORD_SIZE_IN_BYTES); + u32 buffer[E1000_INVM_SIZE]; + s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND; + u16 version = 0; + + DEBUGFUNC("e1000_read_invm_version"); + + /* Read iNVM memory */ + for (i = 0; i < E1000_INVM_SIZE; i++) { + invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i)); + buffer[i] = invm_dword; + } + + /* Read version number */ + for (i = 1; i < invm_blocks; i++) { + record = &buffer[invm_blocks - i]; + next_record = &buffer[invm_blocks - i + 1]; + + /* Check if we have first version location used */ + if ((i == 1) && ((*record & E1000_INVM_VER_FIELD_ONE) == 0)) { + version = 0; + status = E1000_SUCCESS; + break; + } + /* Check if we have second version location used */ + else if ((i == 1) && + ((*record & E1000_INVM_VER_FIELD_TWO) == 0)) { + version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3; + status = E1000_SUCCESS; + break; + } + /* + * Check if we have odd version location + * used and it is the last one used + */ + else if ((((*record & E1000_INVM_VER_FIELD_ONE) == 0) && + ((*record & 0x3) == 0)) || (((*record & 0x3) != 0) && + (i != 1))) { + version = (*next_record & E1000_INVM_VER_FIELD_TWO) + >> 13; + status = E1000_SUCCESS; + break; + } + /* + * Check if we have even version location + * used and it is the last one used + */ + else if (((*record & E1000_INVM_VER_FIELD_TWO) == 0) && + ((*record & 0x3) == 0)) { + version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3; + status = E1000_SUCCESS; + break; + } + } + + if (status == E1000_SUCCESS) { + invm_ver->invm_major = (version & E1000_INVM_MAJOR_MASK) + >> E1000_INVM_MAJOR_SHIFT; + invm_ver->invm_minor = version & E1000_INVM_MINOR_MASK; + } + /* Read Image Type */ + for (i = 1; i < invm_blocks; i++) { + record = &buffer[invm_blocks - i]; + next_record = &buffer[invm_blocks - i + 1]; + + /* Check if we have image type in first location used */ + if ((i == 1) && ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) { + invm_ver->invm_img_type = 0; + status = E1000_SUCCESS; + break; + } + /* Check if we have image type in first location used */ + else if ((((*record & 0x3) == 0) && + ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) || + ((((*record & 0x3) != 0) && (i != 1)))) { + invm_ver->invm_img_type = + (*next_record & E1000_INVM_IMGTYPE_FIELD) >> 23; + status = E1000_SUCCESS; + break; + } + } + return status; +} + +/** + * e1000_validate_nvm_checksum_i210 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + **/ +s32 e1000_validate_nvm_checksum_i210(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + s32 (*read_op_ptr)(struct e1000_hw *, u16, u16, u16 *); + + DEBUGFUNC("e1000_validate_nvm_checksum_i210"); + + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + + /* + * Replace the read function with semaphore grabbing with + * the one that skips this for a while. + * We have semaphore taken already here. + */ + read_op_ptr = hw->nvm.ops.read; + hw->nvm.ops.read = e1000_read_nvm_eerd; + + status = e1000_validate_nvm_checksum_generic(hw); + + /* Revert original read operation. */ + hw->nvm.ops.read = read_op_ptr; + + hw->nvm.ops.release(hw); + } else { + status = E1000_ERR_SWFW_SYNC; + } + + return status; +} + + +/** + * e1000_update_nvm_checksum_i210 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. Next commit EEPROM data onto the Flash. + **/ +s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_update_nvm_checksum_i210"); + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + ret_val = e1000_read_nvm_eerd(hw, 0, 1, &nvm_data); + if (ret_val != E1000_SUCCESS) { + DEBUGOUT("EEPROM read failed\n"); + goto out; + } + + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + /* + * Do not use hw->nvm.ops.write, hw->nvm.ops.read + * because we do not want to take the synchronization + * semaphores twice here. + */ + + for (i = 0; i < NVM_CHECKSUM_REG; i++) { + ret_val = e1000_read_nvm_eerd(hw, i, 1, &nvm_data); + if (ret_val) { + hw->nvm.ops.release(hw); + DEBUGOUT("NVM Read Error while updating checksum.\n"); + goto out; + } + checksum += nvm_data; + } + checksum = (u16) NVM_SUM - checksum; + ret_val = e1000_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1, + &checksum); + if (ret_val != E1000_SUCCESS) { + hw->nvm.ops.release(hw); + DEBUGOUT("NVM Write Error while updating checksum.\n"); + goto out; + } + + hw->nvm.ops.release(hw); + + ret_val = e1000_update_flash_i210(hw); + } else { + ret_val = E1000_ERR_SWFW_SYNC; + } +out: + return ret_val; +} + +/** + * e1000_get_flash_presence_i210 - Check if flash device is detected. + * @hw: pointer to the HW structure + * + **/ +bool e1000_get_flash_presence_i210(struct e1000_hw *hw) +{ + u32 eec = 0; + bool ret_val = false; + + DEBUGFUNC("e1000_get_flash_presence_i210"); + + eec = E1000_READ_REG(hw, E1000_EECD); + + if (eec & E1000_EECD_FLASH_DETECTED_I210) + ret_val = true; + + return ret_val; +} + +/** + * e1000_update_flash_i210 - Commit EEPROM to the flash + * @hw: pointer to the HW structure + * + **/ +s32 e1000_update_flash_i210(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u32 flup; + + DEBUGFUNC("e1000_update_flash_i210"); + + ret_val = e1000_pool_flash_update_done_i210(hw); + if (ret_val == -E1000_ERR_NVM) { + DEBUGOUT("Flash update time out\n"); + goto out; + } + + flup = E1000_READ_REG(hw, E1000_EECD) | E1000_EECD_FLUPD_I210; + E1000_WRITE_REG(hw, E1000_EECD, flup); + + ret_val = e1000_pool_flash_update_done_i210(hw); + if (ret_val == E1000_SUCCESS) + DEBUGOUT("Flash update complete\n"); + else + DEBUGOUT("Flash update time out\n"); + +out: + return ret_val; +} + +/** + * e1000_pool_flash_update_done_i210 - Pool FLUDONE status. + * @hw: pointer to the HW structure + * + **/ +s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw) +{ + s32 ret_val = -E1000_ERR_NVM; + u32 i, reg; + + DEBUGFUNC("e1000_pool_flash_update_done_i210"); + + for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) { + reg = E1000_READ_REG(hw, E1000_EECD); + if (reg & E1000_EECD_FLUDONE_I210) { + ret_val = E1000_SUCCESS; + break; + } + usec_delay(5); + } + + return ret_val; +} + +/** + * e1000_init_nvm_params_i210 - Initialize i210 NVM function pointers + * @hw: pointer to the HW structure + * + * Initialize the i210/i211 NVM parameters and function pointers. + **/ +static s32 e1000_init_nvm_params_i210(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + struct e1000_nvm_info *nvm = &hw->nvm; + + DEBUGFUNC("e1000_init_nvm_params_i210"); + + ret_val = e1000_init_nvm_params_82575(hw); + nvm->ops.acquire = e1000_acquire_nvm_i210; + nvm->ops.release = e1000_release_nvm_i210; + nvm->ops.valid_led_default = e1000_valid_led_default_i210; + if (e1000_get_flash_presence_i210(hw)) { + hw->nvm.type = e1000_nvm_flash_hw; + nvm->ops.read = e1000_read_nvm_srrd_i210; + nvm->ops.write = e1000_write_nvm_srwr_i210; + nvm->ops.validate = e1000_validate_nvm_checksum_i210; + nvm->ops.update = e1000_update_nvm_checksum_i210; + } else { + hw->nvm.type = e1000_nvm_invm; + nvm->ops.read = e1000_read_invm_i210; + nvm->ops.write = e1000_null_write_nvm; + nvm->ops.validate = e1000_null_ops_generic; + nvm->ops.update = e1000_null_ops_generic; + } + return ret_val; +} + +/** + * e1000_init_function_pointers_i210 - Init func ptrs. + * @hw: pointer to the HW structure + * + * Called to initialize all function pointers and parameters. + **/ +void e1000_init_function_pointers_i210(struct e1000_hw *hw) +{ + e1000_init_function_pointers_82575(hw); + hw->nvm.ops.init_params = e1000_init_nvm_params_i210; + + return; +} + +/** + * e1000_valid_led_default_i210 - Verify a valid default LED config + * @hw: pointer to the HW structure + * @data: pointer to the NVM (EEPROM) + * + * Read the EEPROM for the current default LED configuration. If the + * LED configuration is not valid, set to a valid LED configuration. + **/ +static s32 e1000_valid_led_default_i210(struct e1000_hw *hw, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_valid_led_default_i210"); + + ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + + if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) { + switch (hw->phy.media_type) { + case e1000_media_type_internal_serdes: + *data = ID_LED_DEFAULT_I210_SERDES; + break; + case e1000_media_type_copper: + default: + *data = ID_LED_DEFAULT_I210; + break; + } + } +out: + return ret_val; +} + +/** + * __e1000_access_xmdio_reg - Read/write XMDIO register + * @hw: pointer to the HW structure + * @address: XMDIO address to program + * @dev_addr: device address to program + * @data: pointer to value to read/write from/to the XMDIO address + * @read: boolean flag to indicate read or write + **/ +static s32 __e1000_access_xmdio_reg(struct e1000_hw *hw, u16 address, + u8 dev_addr, u16 *data, bool read) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("__e1000_access_xmdio_reg"); + + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, dev_addr); + if (ret_val) + return ret_val; + + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, address); + if (ret_val) + return ret_val; + + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, E1000_MMDAC_FUNC_DATA | + dev_addr); + if (ret_val) + return ret_val; + + if (read) + ret_val = hw->phy.ops.read_reg(hw, E1000_MMDAAD, data); + else + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, *data); + if (ret_val) + return ret_val; + + /* Recalibrate the device back to 0 */ + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, 0); + if (ret_val) + return ret_val; + + return ret_val; +} + +/** + * e1000_read_xmdio_reg - Read XMDIO register + * @hw: pointer to the HW structure + * @addr: XMDIO address to program + * @dev_addr: device address to program + * @data: value to be read from the EMI address + **/ +s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data) +{ + DEBUGFUNC("e1000_read_xmdio_reg"); + + return __e1000_access_xmdio_reg(hw, addr, dev_addr, data, true); +} + +/** + * e1000_write_xmdio_reg - Write XMDIO register + * @hw: pointer to the HW structure + * @addr: XMDIO address to program + * @dev_addr: device address to program + * @data: value to be written to the XMDIO address + **/ +s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data) +{ + DEBUGFUNC("e1000_read_xmdio_reg"); + + return __e1000_access_xmdio_reg(hw, addr, dev_addr, &data, false); +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_i210.h b/kernel/linux/kni/ethtool/igb/e1000_i210.h new file mode 100644 index 00000000..9df7c203 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_i210.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_I210_H_ +#define _E1000_I210_H_ + +bool e1000_get_flash_presence_i210(struct e1000_hw *hw); +s32 e1000_update_flash_i210(struct e1000_hw *hw); +s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw); +s32 e1000_validate_nvm_checksum_i210(struct e1000_hw *hw); +s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data); +s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data); +s32 e1000_read_invm_version(struct e1000_hw *hw, + struct e1000_fw_version *invm_ver); +s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask); +void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask); +s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, + u16 *data); +s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, + u16 data); + +#define E1000_STM_OPCODE 0xDB00 +#define E1000_EEPROM_FLASH_SIZE_WORD 0x11 + +#define INVM_DWORD_TO_RECORD_TYPE(invm_dword) \ + (u8)((invm_dword) & 0x7) +#define INVM_DWORD_TO_WORD_ADDRESS(invm_dword) \ + (u8)(((invm_dword) & 0x0000FE00) >> 9) +#define INVM_DWORD_TO_WORD_DATA(invm_dword) \ + (u16)(((invm_dword) & 0xFFFF0000) >> 16) + +enum E1000_INVM_STRUCTURE_TYPE { + E1000_INVM_UNINITIALIZED_STRUCTURE = 0x00, + E1000_INVM_WORD_AUTOLOAD_STRUCTURE = 0x01, + E1000_INVM_CSR_AUTOLOAD_STRUCTURE = 0x02, + E1000_INVM_PHY_REGISTER_AUTOLOAD_STRUCTURE = 0x03, + E1000_INVM_RSA_KEY_SHA256_STRUCTURE = 0x04, + E1000_INVM_INVALIDATED_STRUCTURE = 0x0F, +}; + +#define E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS 8 +#define E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS 1 +#define E1000_INVM_ULT_BYTES_SIZE 8 +#define E1000_INVM_RECORD_SIZE_IN_BYTES 4 +#define E1000_INVM_VER_FIELD_ONE 0x1FF8 +#define E1000_INVM_VER_FIELD_TWO 0x7FE000 +#define E1000_INVM_IMGTYPE_FIELD 0x1F800000 + +#define E1000_INVM_MAJOR_MASK 0x3F0 +#define E1000_INVM_MINOR_MASK 0xF +#define E1000_INVM_MAJOR_SHIFT 4 + +#define ID_LED_DEFAULT_I210 ((ID_LED_OFF1_ON2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_OFF1_OFF2)) +#define ID_LED_DEFAULT_I210_SERDES ((ID_LED_DEF1_DEF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_OFF1_ON2)) + +/* NVM offset defaults for I211 devices */ +#define NVM_INIT_CTRL_2_DEFAULT_I211 0X7243 +#define NVM_INIT_CTRL_4_DEFAULT_I211 0x00C1 +#define NVM_LED_1_CFG_DEFAULT_I211 0x0184 +#define NVM_LED_0_2_CFG_DEFAULT_I211 0x200C +#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_mac.c b/kernel/linux/kni/ethtool/igb/e1000_mac.c new file mode 100644 index 00000000..13a42267 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_mac.c @@ -0,0 +1,2081 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_api.h" + +static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw); +static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw); +static void e1000_config_collision_dist_generic(struct e1000_hw *hw); +static void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index); + +/** + * e1000_init_mac_ops_generic - Initialize MAC function pointers + * @hw: pointer to the HW structure + * + * Setups up the function pointers to no-op functions + **/ +void e1000_init_mac_ops_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + DEBUGFUNC("e1000_init_mac_ops_generic"); + + /* General Setup */ + mac->ops.init_params = e1000_null_ops_generic; + mac->ops.init_hw = e1000_null_ops_generic; + mac->ops.reset_hw = e1000_null_ops_generic; + mac->ops.setup_physical_interface = e1000_null_ops_generic; + mac->ops.get_bus_info = e1000_null_ops_generic; + mac->ops.set_lan_id = e1000_set_lan_id_multi_port_pcie; + mac->ops.read_mac_addr = e1000_read_mac_addr_generic; + mac->ops.config_collision_dist = e1000_config_collision_dist_generic; + mac->ops.clear_hw_cntrs = e1000_null_mac_generic; + /* LED */ + mac->ops.cleanup_led = e1000_null_ops_generic; + mac->ops.setup_led = e1000_null_ops_generic; + mac->ops.blink_led = e1000_null_ops_generic; + mac->ops.led_on = e1000_null_ops_generic; + mac->ops.led_off = e1000_null_ops_generic; + /* LINK */ + mac->ops.setup_link = e1000_null_ops_generic; + mac->ops.get_link_up_info = e1000_null_link_info; + mac->ops.check_for_link = e1000_null_ops_generic; + /* Management */ + mac->ops.check_mng_mode = e1000_null_mng_mode; + /* VLAN, MC, etc. */ + mac->ops.update_mc_addr_list = e1000_null_update_mc; + mac->ops.clear_vfta = e1000_null_mac_generic; + mac->ops.write_vfta = e1000_null_write_vfta; + mac->ops.rar_set = e1000_rar_set_generic; + mac->ops.validate_mdi_setting = e1000_validate_mdi_setting_generic; +} + +/** + * e1000_null_ops_generic - No-op function, returns 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_ops_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_ops_generic"); + return E1000_SUCCESS; +} + +/** + * e1000_null_mac_generic - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_mac_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_mac_generic"); + return; +} + +/** + * e1000_null_link_info - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_link_info(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG *s, u16 E1000_UNUSEDARG *d) +{ + DEBUGFUNC("e1000_null_link_info"); + return E1000_SUCCESS; +} + +/** + * e1000_null_mng_mode - No-op function, return false + * @hw: pointer to the HW structure + **/ +bool e1000_null_mng_mode(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_mng_mode"); + return false; +} + +/** + * e1000_null_update_mc - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_update_mc(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG *h, u32 E1000_UNUSEDARG a) +{ + DEBUGFUNC("e1000_null_update_mc"); + return; +} + +/** + * e1000_null_write_vfta - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_write_vfta(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG a, u32 E1000_UNUSEDARG b) +{ + DEBUGFUNC("e1000_null_write_vfta"); + return; +} + +/** + * e1000_null_rar_set - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_rar_set(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG *h, u32 E1000_UNUSEDARG a) +{ + DEBUGFUNC("e1000_null_rar_set"); + return; +} + +/** + * e1000_get_bus_info_pcie_generic - Get PCIe bus information + * @hw: pointer to the HW structure + * + * Determines and stores the system bus information for a particular + * network interface. The following bus information is determined and stored: + * bus speed, bus width, type (PCIe), and PCIe function. + **/ +s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_bus_info *bus = &hw->bus; + s32 ret_val; + u16 pcie_link_status; + + DEBUGFUNC("e1000_get_bus_info_pcie_generic"); + + bus->type = e1000_bus_type_pci_express; + + ret_val = e1000_read_pcie_cap_reg(hw, PCIE_LINK_STATUS, + &pcie_link_status); + if (ret_val) { + bus->width = e1000_bus_width_unknown; + bus->speed = e1000_bus_speed_unknown; + } else { + switch (pcie_link_status & PCIE_LINK_SPEED_MASK) { + case PCIE_LINK_SPEED_2500: + bus->speed = e1000_bus_speed_2500; + break; + case PCIE_LINK_SPEED_5000: + bus->speed = e1000_bus_speed_5000; + break; + default: + bus->speed = e1000_bus_speed_unknown; + break; + } + + bus->width = (enum e1000_bus_width)((pcie_link_status & + PCIE_LINK_WIDTH_MASK) >> PCIE_LINK_WIDTH_SHIFT); + } + + mac->ops.set_lan_id(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices + * + * @hw: pointer to the HW structure + * + * Determines the LAN function id by reading memory-mapped registers + * and swaps the port value if requested. + **/ +static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw) +{ + struct e1000_bus_info *bus = &hw->bus; + u32 reg; + + /* The status register reports the correct function number + * for the device regardless of function swap state. + */ + reg = E1000_READ_REG(hw, E1000_STATUS); + bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT; +} + +/** + * e1000_set_lan_id_single_port - Set LAN id for a single port device + * @hw: pointer to the HW structure + * + * Sets the LAN function id to zero for a single port device. + **/ +void e1000_set_lan_id_single_port(struct e1000_hw *hw) +{ + struct e1000_bus_info *bus = &hw->bus; + + bus->func = 0; +} + +/** + * e1000_clear_vfta_generic - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * Clears the register array which contains the VLAN filter table by + * setting all the values to 0. + **/ +void e1000_clear_vfta_generic(struct e1000_hw *hw) +{ + u32 offset; + + DEBUGFUNC("e1000_clear_vfta_generic"); + + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); + E1000_WRITE_FLUSH(hw); + } +} + +/** + * e1000_write_vfta_generic - Write value to VLAN filter table + * @hw: pointer to the HW structure + * @offset: register offset in VLAN filter table + * @value: register value written to VLAN filter table + * + * Writes value at the given offset in the register array which stores + * the VLAN filter table. + **/ +void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value) +{ + DEBUGFUNC("e1000_write_vfta_generic"); + + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_init_rx_addrs_generic - Initialize receive address's + * @hw: pointer to the HW structure + * @rar_count: receive address registers + * + * Setup the receive address registers by setting the base receive address + * register to the devices MAC address and clearing all the other receive + * address registers to 0. + **/ +void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count) +{ + u32 i; + u8 mac_addr[ETH_ADDR_LEN] = {0}; + + DEBUGFUNC("e1000_init_rx_addrs_generic"); + + /* Setup the receive address */ + DEBUGOUT("Programming MAC Address into RAR[0]\n"); + + hw->mac.ops.rar_set(hw, hw->mac.addr, 0); + + /* Zero out the other (rar_entry_count - 1) receive addresses */ + DEBUGOUT1("Clearing RAR[1-%u]\n", rar_count-1); + for (i = 1; i < rar_count; i++) + hw->mac.ops.rar_set(hw, mac_addr, i); +} + +/** + * e1000_check_alt_mac_addr_generic - Check for alternate MAC addr + * @hw: pointer to the HW structure + * + * Checks the nvm for an alternate MAC address. An alternate MAC address + * can be setup by pre-boot software and must be treated like a permanent + * address and must override the actual permanent MAC address. If an + * alternate MAC address is found it is programmed into RAR0, replacing + * the permanent address that was installed into RAR0 by the Si on reset. + * This function will return SUCCESS unless it encounters an error while + * reading the EEPROM. + **/ +s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) +{ + u32 i; + s32 ret_val; + u16 offset, nvm_alt_mac_addr_offset, nvm_data; + u8 alt_mac_addr[ETH_ADDR_LEN]; + + DEBUGFUNC("e1000_check_alt_mac_addr_generic"); + + ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &nvm_data); + if (ret_val) + return ret_val; + + + /* Alternate MAC address is handled by the option ROM for 82580 + * and newer. SW support not required. + */ + if (hw->mac.type >= e1000_82580) + return E1000_SUCCESS; + + ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1, + &nvm_alt_mac_addr_offset); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if ((nvm_alt_mac_addr_offset == 0xFFFF) || + (nvm_alt_mac_addr_offset == 0x0000)) + /* There is no Alternate MAC Address */ + return E1000_SUCCESS; + + if (hw->bus.func == E1000_FUNC_1) + nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1; + if (hw->bus.func == E1000_FUNC_2) + nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN2; + + if (hw->bus.func == E1000_FUNC_3) + nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN3; + for (i = 0; i < ETH_ADDR_LEN; i += 2) { + offset = nvm_alt_mac_addr_offset + (i >> 1); + ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + alt_mac_addr[i] = (u8)(nvm_data & 0xFF); + alt_mac_addr[i + 1] = (u8)(nvm_data >> 8); + } + + /* if multicast bit is set, the alternate address will not be used */ + if (alt_mac_addr[0] & 0x01) { + DEBUGOUT("Ignoring Alternate Mac Address with MC bit set\n"); + return E1000_SUCCESS; + } + + /* We have a valid alternate MAC address, and we want to treat it the + * same as the normal permanent MAC address stored by the HW into the + * RAR. Do this by mapping this address into RAR0. + */ + hw->mac.ops.rar_set(hw, alt_mac_addr, 0); + + return E1000_SUCCESS; +} + +/** + * e1000_rar_set_generic - Set receive address register + * @hw: pointer to the HW structure + * @addr: pointer to the receive address + * @index: receive address array register + * + * Sets the receive address array register at index to the address passed + * in by addr. + **/ +static void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) +{ + u32 rar_low, rar_high; + + DEBUGFUNC("e1000_rar_set_generic"); + + /* HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + + rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); + + /* If MAC address zero, no need to set the AV bit */ + if (rar_low || rar_high) + rar_high |= E1000_RAH_AV; + + /* Some bridges will combine consecutive 32-bit writes into + * a single burst write, which will malfunction on some parts. + * The flushes avoid this. + */ + E1000_WRITE_REG(hw, E1000_RAL(index), rar_low); + E1000_WRITE_FLUSH(hw); + E1000_WRITE_REG(hw, E1000_RAH(index), rar_high); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_hash_mc_addr_generic - Generate a multicast hash value + * @hw: pointer to the HW structure + * @mc_addr: pointer to a multicast address + * + * Generates a multicast address hash value which is used to determine + * the multicast filter table array address and new table value. + **/ +u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr) +{ + u32 hash_value, hash_mask; + u8 bit_shift = 0; + + DEBUGFUNC("e1000_hash_mc_addr_generic"); + + /* Register count multiplied by bits per register */ + hash_mask = (hw->mac.mta_reg_count * 32) - 1; + + /* For a mc_filter_type of 0, bit_shift is the number of left-shifts + * where 0xFF would still fall within the hash mask. + */ + while (hash_mask >> bit_shift != 0xFF) + bit_shift++; + + /* The portion of the address that is used for the hash table + * is determined by the mc_filter_type setting. + * The algorithm is such that there is a total of 8 bits of shifting. + * The bit_shift for a mc_filter_type of 0 represents the number of + * left-shifts where the MSB of mc_addr[5] would still fall within + * the hash_mask. Case 0 does this exactly. Since there are a total + * of 8 bits of shifting, then mc_addr[4] will shift right the + * remaining number of bits. Thus 8 - bit_shift. The rest of the + * cases are a variation of this algorithm...essentially raising the + * number of bits to shift mc_addr[5] left, while still keeping the + * 8-bit shifting total. + * + * For example, given the following Destination MAC Address and an + * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask), + * we can see that the bit_shift for case 0 is 4. These are the hash + * values resulting from each mc_filter_type... + * [0] [1] [2] [3] [4] [5] + * 01 AA 00 12 34 56 + * LSB MSB + * + * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563 + * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6 + * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163 + * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634 + */ + switch (hw->mac.mc_filter_type) { + default: + case 0: + break; + case 1: + bit_shift += 1; + break; + case 2: + bit_shift += 2; + break; + case 3: + bit_shift += 4; + break; + } + + hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | + (((u16) mc_addr[5]) << bit_shift))); + + return hash_value; +} + +/** + * e1000_update_mc_addr_list_generic - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * + * Updates entire Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + **/ +void e1000_update_mc_addr_list_generic(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count) +{ + u32 hash_value, hash_bit, hash_reg; + int i; + + DEBUGFUNC("e1000_update_mc_addr_list_generic"); + + /* clear mta_shadow */ + memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); + + /* update mta_shadow from mc_addr_list */ + for (i = 0; (u32) i < mc_addr_count; i++) { + hash_value = e1000_hash_mc_addr_generic(hw, mc_addr_list); + + hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); + hash_bit = hash_value & 0x1F; + + hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit); + mc_addr_list += (ETH_ADDR_LEN); + } + + /* replace the entire MTA table */ + for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) + E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_clear_hw_cntrs_base_generic - Clear base hardware counters + * @hw: pointer to the HW structure + * + * Clears the base hardware counters by reading the counter registers. + **/ +void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_clear_hw_cntrs_base_generic"); + + E1000_READ_REG(hw, E1000_CRCERRS); + E1000_READ_REG(hw, E1000_SYMERRS); + E1000_READ_REG(hw, E1000_MPC); + E1000_READ_REG(hw, E1000_SCC); + E1000_READ_REG(hw, E1000_ECOL); + E1000_READ_REG(hw, E1000_MCC); + E1000_READ_REG(hw, E1000_LATECOL); + E1000_READ_REG(hw, E1000_COLC); + E1000_READ_REG(hw, E1000_DC); + E1000_READ_REG(hw, E1000_SEC); + E1000_READ_REG(hw, E1000_RLEC); + E1000_READ_REG(hw, E1000_XONRXC); + E1000_READ_REG(hw, E1000_XONTXC); + E1000_READ_REG(hw, E1000_XOFFRXC); + E1000_READ_REG(hw, E1000_XOFFTXC); + E1000_READ_REG(hw, E1000_FCRUC); + E1000_READ_REG(hw, E1000_GPRC); + E1000_READ_REG(hw, E1000_BPRC); + E1000_READ_REG(hw, E1000_MPRC); + E1000_READ_REG(hw, E1000_GPTC); + E1000_READ_REG(hw, E1000_GORCL); + E1000_READ_REG(hw, E1000_GORCH); + E1000_READ_REG(hw, E1000_GOTCL); + E1000_READ_REG(hw, E1000_GOTCH); + E1000_READ_REG(hw, E1000_RNBC); + E1000_READ_REG(hw, E1000_RUC); + E1000_READ_REG(hw, E1000_RFC); + E1000_READ_REG(hw, E1000_ROC); + E1000_READ_REG(hw, E1000_RJC); + E1000_READ_REG(hw, E1000_TORL); + E1000_READ_REG(hw, E1000_TORH); + E1000_READ_REG(hw, E1000_TOTL); + E1000_READ_REG(hw, E1000_TOTH); + E1000_READ_REG(hw, E1000_TPR); + E1000_READ_REG(hw, E1000_TPT); + E1000_READ_REG(hw, E1000_MPTC); + E1000_READ_REG(hw, E1000_BPTC); +} + +/** + * e1000_check_for_copper_link_generic - Check for link (Copper) + * @hw: pointer to the HW structure + * + * Checks to see of the link status of the hardware has changed. If a + * change in link status has been detected, then we read the PHY registers + * to get the current speed/duplex if link exists. + **/ +s32 e1000_check_for_copper_link_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + bool link; + + DEBUGFUNC("e1000_check_for_copper_link"); + + /* We only want to go out to the PHY registers to see if Auto-Neg + * has completed and/or if our link status has changed. The + * get_link_status flag is set upon receiving a Link Status + * Change or Rx Sequence Error interrupt. + */ + if (!mac->get_link_status) + return E1000_SUCCESS; + + /* First we want to see if the MII Status Register reports + * link. If so, then we want to get the current speed/duplex + * of the PHY. + */ + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) + return E1000_SUCCESS; /* No link detected */ + + mac->get_link_status = false; + + /* Check if there was DownShift, must be checked + * immediately after link-up + */ + e1000_check_downshift_generic(hw); + + /* If we are forcing speed/duplex, then we simply return since + * we have already determined whether we have link or not. + */ + if (!mac->autoneg) + return -E1000_ERR_CONFIG; + + /* Auto-Neg is enabled. Auto Speed Detection takes care + * of MAC speed/duplex configuration. So we only need to + * configure Collision Distance in the MAC. + */ + mac->ops.config_collision_dist(hw); + + /* Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control + * settings because we may have had to re-autoneg with a + * different link partner. + */ + ret_val = e1000_config_fc_after_link_up_generic(hw); + if (ret_val) + DEBUGOUT("Error configuring flow control\n"); + + return ret_val; +} + +/** + * e1000_check_for_fiber_link_generic - Check for link (Fiber) + * @hw: pointer to the HW structure + * + * Checks for link up on the hardware. If link is not up and we have + * a signal, then we need to force link up. + **/ +s32 e1000_check_for_fiber_link_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 rxcw; + u32 ctrl; + u32 status; + s32 ret_val; + + DEBUGFUNC("e1000_check_for_fiber_link_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + status = E1000_READ_REG(hw, E1000_STATUS); + rxcw = E1000_READ_REG(hw, E1000_RXCW); + + /* If we don't have link (auto-negotiation failed or link partner + * cannot auto-negotiate), the cable is plugged in (we have signal), + * and our link partner is not trying to auto-negotiate with us (we + * are receiving idles or data), we need to force link up. We also + * need to give auto-negotiation time to complete, in case the cable + * was just plugged in. The autoneg_failed flag does this. + */ + /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ + if ((ctrl & E1000_CTRL_SWDPIN1) && !(status & E1000_STATUS_LU) && + !(rxcw & E1000_RXCW_C)) { + if (!mac->autoneg_failed) { + mac->autoneg_failed = true; + return E1000_SUCCESS; + } + DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); + + /* Disable auto-negotiation in the TXCW register */ + E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE)); + + /* Force link-up and also force full-duplex. */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Configure Flow Control after forcing link up. */ + ret_val = e1000_config_fc_after_link_up_generic(hw); + if (ret_val) { + DEBUGOUT("Error configuring flow control\n"); + return ret_val; + } + } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { + /* If we are forcing link and we are receiving /C/ ordered + * sets, re-enable auto-negotiation in the TXCW register + * and disable forced link in the Device Control register + * in an attempt to auto-negotiate with our link partner. + */ + DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); + E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw); + E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU)); + + mac->serdes_has_link = true; + } + + return E1000_SUCCESS; +} + +/** + * e1000_check_for_serdes_link_generic - Check for link (Serdes) + * @hw: pointer to the HW structure + * + * Checks for link up on the hardware. If link is not up and we have + * a signal, then we need to force link up. + **/ +s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 rxcw; + u32 ctrl; + u32 status; + s32 ret_val; + + DEBUGFUNC("e1000_check_for_serdes_link_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + status = E1000_READ_REG(hw, E1000_STATUS); + rxcw = E1000_READ_REG(hw, E1000_RXCW); + + /* If we don't have link (auto-negotiation failed or link partner + * cannot auto-negotiate), and our link partner is not trying to + * auto-negotiate with us (we are receiving idles or data), + * we need to force link up. We also need to give auto-negotiation + * time to complete. + */ + /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ + if (!(status & E1000_STATUS_LU) && !(rxcw & E1000_RXCW_C)) { + if (!mac->autoneg_failed) { + mac->autoneg_failed = true; + return E1000_SUCCESS; + } + DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); + + /* Disable auto-negotiation in the TXCW register */ + E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE)); + + /* Force link-up and also force full-duplex. */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Configure Flow Control after forcing link up. */ + ret_val = e1000_config_fc_after_link_up_generic(hw); + if (ret_val) { + DEBUGOUT("Error configuring flow control\n"); + return ret_val; + } + } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { + /* If we are forcing link and we are receiving /C/ ordered + * sets, re-enable auto-negotiation in the TXCW register + * and disable forced link in the Device Control register + * in an attempt to auto-negotiate with our link partner. + */ + DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); + E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw); + E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU)); + + mac->serdes_has_link = true; + } else if (!(E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW))) { + /* If we force link for non-auto-negotiation switch, check + * link status based on MAC synchronization for internal + * serdes media type. + */ + /* SYNCH bit and IV bit are sticky. */ + usec_delay(10); + rxcw = E1000_READ_REG(hw, E1000_RXCW); + if (rxcw & E1000_RXCW_SYNCH) { + if (!(rxcw & E1000_RXCW_IV)) { + mac->serdes_has_link = true; + DEBUGOUT("SERDES: Link up - forced.\n"); + } + } else { + mac->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - force failed.\n"); + } + } + + if (E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW)) { + status = E1000_READ_REG(hw, E1000_STATUS); + if (status & E1000_STATUS_LU) { + /* SYNCH bit and IV bit are sticky, so reread rxcw. */ + usec_delay(10); + rxcw = E1000_READ_REG(hw, E1000_RXCW); + if (rxcw & E1000_RXCW_SYNCH) { + if (!(rxcw & E1000_RXCW_IV)) { + mac->serdes_has_link = true; + DEBUGOUT("SERDES: Link up - autoneg completed successfully.\n"); + } else { + mac->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - invalid codewords detected in autoneg.\n"); + } + } else { + mac->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - no sync.\n"); + } + } else { + mac->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - autoneg failed\n"); + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_set_default_fc_generic - Set flow control default values + * @hw: pointer to the HW structure + * + * Read the EEPROM for the default values for flow control and store the + * values. + **/ +static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) +{ + s32 ret_val; + u16 nvm_data; + + DEBUGFUNC("e1000_set_default_fc_generic"); + + /* Read and store word 0x0F of the EEPROM. This word contains bits + * that determine the hardware's default PAUSE (flow control) mode, + * a bit that determines whether the HW defaults to enabling or + * disabling auto-negotiation, and the direction of the + * SW defined pins. If there is no SW over-ride of the flow + * control setting, then the variable hw->fc will + * be initialized based on a value in the EEPROM. + */ + ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data); + + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (!(nvm_data & NVM_WORD0F_PAUSE_MASK)) + hw->fc.requested_mode = e1000_fc_none; + else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == + NVM_WORD0F_ASM_DIR) + hw->fc.requested_mode = e1000_fc_tx_pause; + else + hw->fc.requested_mode = e1000_fc_full; + + return E1000_SUCCESS; +} + +/** + * e1000_setup_link_generic - Setup flow control and link settings + * @hw: pointer to the HW structure + * + * Determines which flow control settings to use, then configures flow + * control. Calls the appropriate media-specific link configuration + * function. Assuming the adapter has a valid link partner, a valid link + * should be established. Assumes the hardware has previously been reset + * and the transmitter and receiver are not enabled. + **/ +s32 e1000_setup_link_generic(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_setup_link_generic"); + + /* In the case of the phy reset being blocked, we already have a link. + * We do not need to set it up again. + */ + if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) + return E1000_SUCCESS; + + /* If requested flow control is set to default, set flow control + * based on the EEPROM flow control settings. + */ + if (hw->fc.requested_mode == e1000_fc_default) { + ret_val = e1000_set_default_fc_generic(hw); + if (ret_val) + return ret_val; + } + + /* Save off the requested flow control mode for use later. Depending + * on the link partner's capabilities, we may or may not use this mode. + */ + hw->fc.current_mode = hw->fc.requested_mode; + + DEBUGOUT1("After fix-ups FlowControl is now = %x\n", + hw->fc.current_mode); + + /* Call the necessary media_type subroutine to configure the link. */ + ret_val = hw->mac.ops.setup_physical_interface(hw); + if (ret_val) + return ret_val; + + /* Initialize the flow control address, type, and PAUSE timer + * registers to their default values. This is done even if flow + * control is disabled, because it does not hurt anything to + * initialize these registers. + */ + DEBUGOUT("Initializing the Flow Control address, type and timer regs\n"); + E1000_WRITE_REG(hw, E1000_FCT, FLOW_CONTROL_TYPE); + E1000_WRITE_REG(hw, E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH); + E1000_WRITE_REG(hw, E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW); + + E1000_WRITE_REG(hw, E1000_FCTTV, hw->fc.pause_time); + + return e1000_set_fc_watermarks_generic(hw); +} + +/** + * e1000_commit_fc_settings_generic - Configure flow control + * @hw: pointer to the HW structure + * + * Write the flow control settings to the Transmit Config Word Register (TXCW) + * base on the flow control settings in e1000_mac_info. + **/ +static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 txcw; + + DEBUGFUNC("e1000_commit_fc_settings_generic"); + + /* Check for a software override of the flow control settings, and + * setup the device accordingly. If auto-negotiation is enabled, then + * software will have to set the "PAUSE" bits to the correct value in + * the Transmit Config Word Register (TXCW) and re-start auto- + * negotiation. However, if auto-negotiation is disabled, then + * software will have to manually configure the two flow control enable + * bits in the CTRL register. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but we + * do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + */ + switch (hw->fc.current_mode) { + case e1000_fc_none: + /* Flow control completely disabled by a software over-ride. */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); + break; + case e1000_fc_rx_pause: + /* Rx Flow control is enabled and Tx Flow control is disabled + * by a software over-ride. Since there really isn't a way to + * advertise that we are capable of Rx Pause ONLY, we will + * advertise that we support both symmetric and asymmetric Rx + * PAUSE. Later, we will disable the adapter's ability to send + * PAUSE frames. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); + break; + case e1000_fc_tx_pause: + /* Tx Flow control is enabled, and Rx Flow control is disabled, + * by a software over-ride. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); + break; + case e1000_fc_full: + /* Flow control (both Rx and Tx) is enabled by a software + * over-ride. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + break; + } + + E1000_WRITE_REG(hw, E1000_TXCW, txcw); + mac->txcw = txcw; + + return E1000_SUCCESS; +} + +/** + * e1000_poll_fiber_serdes_link_generic - Poll for link up + * @hw: pointer to the HW structure + * + * Polls for link up by reading the status register, if link fails to come + * up with auto-negotiation, then the link is forced if a signal is detected. + **/ +static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 i, status; + s32 ret_val; + + DEBUGFUNC("e1000_poll_fiber_serdes_link_generic"); + + /* If we have a signal (the cable is plugged in, or assumed true for + * serdes media) then poll for a "Link-Up" indication in the Device + * Status Register. Time-out if a link isn't seen in 500 milliseconds + * seconds (Auto-negotiation should complete in less than 500 + * milliseconds even if the other end is doing it in SW). + */ + for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) { + msec_delay(10); + status = E1000_READ_REG(hw, E1000_STATUS); + if (status & E1000_STATUS_LU) + break; + } + if (i == FIBER_LINK_UP_LIMIT) { + DEBUGOUT("Never got a valid link from auto-neg!!!\n"); + mac->autoneg_failed = true; + /* AutoNeg failed to achieve a link, so we'll call + * mac->check_for_link. This routine will force the + * link up if we detect a signal. This will allow us to + * communicate with non-autonegotiating link partners. + */ + ret_val = mac->ops.check_for_link(hw); + if (ret_val) { + DEBUGOUT("Error while checking for link\n"); + return ret_val; + } + mac->autoneg_failed = false; + } else { + mac->autoneg_failed = false; + DEBUGOUT("Valid Link Found\n"); + } + + return E1000_SUCCESS; +} + +/** + * e1000_setup_fiber_serdes_link_generic - Setup link for fiber/serdes + * @hw: pointer to the HW structure + * + * Configures collision distance and flow control for fiber and serdes + * links. Upon successful setup, poll for link. + **/ +s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val; + + DEBUGFUNC("e1000_setup_fiber_serdes_link_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + + /* Take the link out of reset */ + ctrl &= ~E1000_CTRL_LRST; + + hw->mac.ops.config_collision_dist(hw); + + ret_val = e1000_commit_fc_settings_generic(hw); + if (ret_val) + return ret_val; + + /* Since auto-negotiation is enabled, take the link out of reset (the + * link will be in reset, because we previously reset the chip). This + * will restart auto-negotiation. If auto-negotiation is successful + * then the link-up status bit will be set and the flow control enable + * bits (RFCE and TFCE) will be set according to their negotiated value. + */ + DEBUGOUT("Auto-negotiation enabled\n"); + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + E1000_WRITE_FLUSH(hw); + msec_delay(1); + + /* For these adapters, the SW definable pin 1 is set when the optics + * detect a signal. If we have a signal, then poll for a "Link-Up" + * indication. + */ + if (hw->phy.media_type == e1000_media_type_internal_serdes || + (E1000_READ_REG(hw, E1000_CTRL) & E1000_CTRL_SWDPIN1)) { + ret_val = e1000_poll_fiber_serdes_link_generic(hw); + } else { + DEBUGOUT("No signal detected\n"); + } + + return ret_val; +} + +/** + * e1000_config_collision_dist_generic - Configure collision distance + * @hw: pointer to the HW structure + * + * Configures the collision distance to the default value and is used + * during link setup. + **/ +static void e1000_config_collision_dist_generic(struct e1000_hw *hw) +{ + u32 tctl; + + DEBUGFUNC("e1000_config_collision_dist_generic"); + + tctl = E1000_READ_REG(hw, E1000_TCTL); + + tctl &= ~E1000_TCTL_COLD; + tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT; + + E1000_WRITE_REG(hw, E1000_TCTL, tctl); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_set_fc_watermarks_generic - Set flow control high/low watermarks + * @hw: pointer to the HW structure + * + * Sets the flow control high/low threshold (watermark) registers. If + * flow control XON frame transmission is enabled, then set XON frame + * transmission as well. + **/ +s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw) +{ + u32 fcrtl = 0, fcrth = 0; + + DEBUGFUNC("e1000_set_fc_watermarks_generic"); + + /* Set the flow control receive threshold registers. Normally, + * these registers will be set to a default threshold that may be + * adjusted later by the driver's runtime code. However, if the + * ability to transmit pause frames is not enabled, then these + * registers will be set to 0. + */ + if (hw->fc.current_mode & e1000_fc_tx_pause) { + /* We need to set up the Receive Threshold high and low water + * marks as well as (optionally) enabling the transmission of + * XON frames. + */ + fcrtl = hw->fc.low_water; + if (hw->fc.send_xon) + fcrtl |= E1000_FCRTL_XONE; + + fcrth = hw->fc.high_water; + } + E1000_WRITE_REG(hw, E1000_FCRTL, fcrtl); + E1000_WRITE_REG(hw, E1000_FCRTH, fcrth); + + return E1000_SUCCESS; +} + +/** + * e1000_force_mac_fc_generic - Force the MAC's flow control settings + * @hw: pointer to the HW structure + * + * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the + * device control register to reflect the adapter settings. TFCE and RFCE + * need to be explicitly set by software when a copper PHY is used because + * autonegotiation is managed by the PHY rather than the MAC. Software must + * also configure these bits when link is forced on a fiber connection. + **/ +s32 e1000_force_mac_fc_generic(struct e1000_hw *hw) +{ + u32 ctrl; + + DEBUGFUNC("e1000_force_mac_fc_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + + /* Because we didn't get link via the internal auto-negotiation + * mechanism (we either forced link or we got link via PHY + * auto-neg), we have to manually enable/disable transmit an + * receive flow control. + * + * The "Case" statement below enables/disable flow control + * according to the "hw->fc.current_mode" parameter. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause + * frames but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * frames but we do not receive pause frames). + * 3: Both Rx and Tx flow control (symmetric) is enabled. + * other: No other values should be possible at this point. + */ + DEBUGOUT1("hw->fc.current_mode = %u\n", hw->fc.current_mode); + + switch (hw->fc.current_mode) { + case e1000_fc_none: + ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); + break; + case e1000_fc_rx_pause: + ctrl &= (~E1000_CTRL_TFCE); + ctrl |= E1000_CTRL_RFCE; + break; + case e1000_fc_tx_pause: + ctrl &= (~E1000_CTRL_RFCE); + ctrl |= E1000_CTRL_TFCE; + break; + case e1000_fc_full: + ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + } + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + return E1000_SUCCESS; +} + +/** + * e1000_config_fc_after_link_up_generic - Configures flow control after link + * @hw: pointer to the HW structure + * + * Checks the status of auto-negotiation after link up to ensure that the + * speed and duplex were not forced. If the link needed to be forced, then + * flow control needs to be forced also. If auto-negotiation is enabled + * and did not fail, then we configure flow control based on our link + * partner. + **/ +s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val = E1000_SUCCESS; + u32 pcs_status_reg, pcs_adv_reg, pcs_lp_ability_reg, pcs_ctrl_reg; + u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; + u16 speed, duplex; + + DEBUGFUNC("e1000_config_fc_after_link_up_generic"); + + /* Check for the case where we have fiber media and auto-neg failed + * so we had to force link. In this case, we need to force the + * configuration of the MAC to match the "fc" parameter. + */ + if (mac->autoneg_failed) { + if (hw->phy.media_type == e1000_media_type_fiber || + hw->phy.media_type == e1000_media_type_internal_serdes) + ret_val = e1000_force_mac_fc_generic(hw); + } else { + if (hw->phy.media_type == e1000_media_type_copper) + ret_val = e1000_force_mac_fc_generic(hw); + } + + if (ret_val) { + DEBUGOUT("Error forcing flow control settings\n"); + return ret_val; + } + + /* Check for the case where we have copper media and auto-neg is + * enabled. In this case, we need to check and see if Auto-Neg + * has completed, and if so, how the PHY and link partner has + * flow control configured. + */ + if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) { + /* Read the MII Status Register and check to see if AutoNeg + * has completed. We read this twice because this reg has + * some "sticky" (latched) bits. + */ + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { + DEBUGOUT("Copper PHY and Auto Neg has not completed.\n"); + return ret_val; + } + + /* The AutoNeg process has completed, so we now need to + * read both the Auto Negotiation Advertisement + * Register (Address 4) and the Auto_Negotiation Base + * Page Ability Register (Address 5) to determine how + * flow control was negotiated. + */ + ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV, + &mii_nway_adv_reg); + if (ret_val) + return ret_val; + ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY, + &mii_nway_lp_ability_reg); + if (ret_val) + return ret_val; + + /* Two bits in the Auto Negotiation Advertisement Register + * (Address 4) and two bits in the Auto Negotiation Base + * Page Ability Register (Address 5) determine flow control + * for both the PHY and the link partner. The following + * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, + * 1999, describes these PAUSE resolution bits and how flow + * control is determined based upon these settings. + * NOTE: DC = Don't Care + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution + *-------|---------|-------|---------|-------------------- + * 0 | 0 | DC | DC | e1000_fc_none + * 0 | 1 | 0 | DC | e1000_fc_none + * 0 | 1 | 1 | 0 | e1000_fc_none + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 1 | 0 | 0 | DC | e1000_fc_none + * 1 | DC | 1 | DC | e1000_fc_full + * 1 | 1 | 0 | 0 | e1000_fc_none + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * + * Are both PAUSE bits set to 1? If so, this implies + * Symmetric Flow Control is enabled at both ends. The + * ASM_DIR bits are irrelevant per the spec. + * + * For Symmetric Flow Control: + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | DC | 1 | DC | E1000_fc_full + * + */ + if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { + /* Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise Rx + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == e1000_fc_full) { + hw->fc.current_mode = e1000_fc_full; + DEBUGOUT("Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = e1000_fc_rx_pause; + DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } + } + /* For receiving PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + */ + else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_tx_pause; + DEBUGOUT("Flow Control = Tx PAUSE frames only.\n"); + } + /* For transmitting PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + */ + else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_rx_pause; + DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } else { + /* Per the IEEE spec, at this point flow control + * should be disabled. + */ + hw->fc.current_mode = e1000_fc_none; + DEBUGOUT("Flow Control = NONE.\n"); + } + + /* Now we need to do one last check... If we auto- + * negotiated to HALF DUPLEX, flow control should not be + * enabled per IEEE 802.3 spec. + */ + ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex); + if (ret_val) { + DEBUGOUT("Error getting link speed and duplex\n"); + return ret_val; + } + + if (duplex == HALF_DUPLEX) + hw->fc.current_mode = e1000_fc_none; + + /* Now we call a subroutine to actually force the MAC + * controller to use the correct flow control settings. + */ + ret_val = e1000_force_mac_fc_generic(hw); + if (ret_val) { + DEBUGOUT("Error forcing flow control settings\n"); + return ret_val; + } + } + + /* Check for the case where we have SerDes media and auto-neg is + * enabled. In this case, we need to check and see if Auto-Neg + * has completed, and if so, how the PHY and link partner has + * flow control configured. + */ + if ((hw->phy.media_type == e1000_media_type_internal_serdes) && + mac->autoneg) { + /* Read the PCS_LSTS and check to see if AutoNeg + * has completed. + */ + pcs_status_reg = E1000_READ_REG(hw, E1000_PCS_LSTAT); + + if (!(pcs_status_reg & E1000_PCS_LSTS_AN_COMPLETE)) { + DEBUGOUT("PCS Auto Neg has not completed.\n"); + return ret_val; + } + + /* The AutoNeg process has completed, so we now need to + * read both the Auto Negotiation Advertisement + * Register (PCS_ANADV) and the Auto_Negotiation Base + * Page Ability Register (PCS_LPAB) to determine how + * flow control was negotiated. + */ + pcs_adv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV); + pcs_lp_ability_reg = E1000_READ_REG(hw, E1000_PCS_LPAB); + + /* Two bits in the Auto Negotiation Advertisement Register + * (PCS_ANADV) and two bits in the Auto Negotiation Base + * Page Ability Register (PCS_LPAB) determine flow control + * for both the PHY and the link partner. The following + * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, + * 1999, describes these PAUSE resolution bits and how flow + * control is determined based upon these settings. + * NOTE: DC = Don't Care + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution + *-------|---------|-------|---------|-------------------- + * 0 | 0 | DC | DC | e1000_fc_none + * 0 | 1 | 0 | DC | e1000_fc_none + * 0 | 1 | 1 | 0 | e1000_fc_none + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 1 | 0 | 0 | DC | e1000_fc_none + * 1 | DC | 1 | DC | e1000_fc_full + * 1 | 1 | 0 | 0 | e1000_fc_none + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * + * Are both PAUSE bits set to 1? If so, this implies + * Symmetric Flow Control is enabled at both ends. The + * ASM_DIR bits are irrelevant per the spec. + * + * For Symmetric Flow Control: + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | DC | 1 | DC | e1000_fc_full + * + */ + if ((pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_PAUSE)) { + /* Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise Rx + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == e1000_fc_full) { + hw->fc.current_mode = e1000_fc_full; + DEBUGOUT("Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = e1000_fc_rx_pause; + DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } + } + /* For receiving PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + */ + else if (!(pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_adv_reg & E1000_TXCW_ASM_DIR) && + (pcs_lp_ability_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_tx_pause; + DEBUGOUT("Flow Control = Tx PAUSE frames only.\n"); + } + /* For transmitting PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + */ + else if ((pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_adv_reg & E1000_TXCW_ASM_DIR) && + !(pcs_lp_ability_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_rx_pause; + DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } else { + /* Per the IEEE spec, at this point flow control + * should be disabled. + */ + hw->fc.current_mode = e1000_fc_none; + DEBUGOUT("Flow Control = NONE.\n"); + } + + /* Now we call a subroutine to actually force the MAC + * controller to use the correct flow control settings. + */ + pcs_ctrl_reg = E1000_READ_REG(hw, E1000_PCS_LCTL); + pcs_ctrl_reg |= E1000_PCS_LCTL_FORCE_FCTRL; + E1000_WRITE_REG(hw, E1000_PCS_LCTL, pcs_ctrl_reg); + + ret_val = e1000_force_mac_fc_generic(hw); + if (ret_val) { + DEBUGOUT("Error forcing flow control settings\n"); + return ret_val; + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_get_speed_and_duplex_copper_generic - Retrieve current speed/duplex + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * Read the status register for the current speed/duplex and store the current + * speed and duplex for copper connections. + **/ +s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + u32 status; + + DEBUGFUNC("e1000_get_speed_and_duplex_copper_generic"); + + status = E1000_READ_REG(hw, E1000_STATUS); + if (status & E1000_STATUS_SPEED_1000) { + *speed = SPEED_1000; + DEBUGOUT("1000 Mbs, "); + } else if (status & E1000_STATUS_SPEED_100) { + *speed = SPEED_100; + DEBUGOUT("100 Mbs, "); + } else { + *speed = SPEED_10; + DEBUGOUT("10 Mbs, "); + } + + if (status & E1000_STATUS_FD) { + *duplex = FULL_DUPLEX; + DEBUGOUT("Full Duplex\n"); + } else { + *duplex = HALF_DUPLEX; + DEBUGOUT("Half Duplex\n"); + } + + return E1000_SUCCESS; +} + +/** + * e1000_get_speed_and_duplex_fiber_generic - Retrieve current speed/duplex + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * Sets the speed and duplex to gigabit full duplex (the only possible option) + * for fiber/serdes links. + **/ +s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw E1000_UNUSEDARG *hw, + u16 *speed, u16 *duplex) +{ + DEBUGFUNC("e1000_get_speed_and_duplex_fiber_serdes_generic"); + + *speed = SPEED_1000; + *duplex = FULL_DUPLEX; + + return E1000_SUCCESS; +} + +/** + * e1000_get_hw_semaphore_generic - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore to access the PHY or NVM + **/ +s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw) +{ + u32 swsm; + s32 timeout = hw->nvm.word_size + 1; + s32 i = 0; + + DEBUGFUNC("e1000_get_hw_semaphore_generic"); + + /* Get the SW semaphore */ + while (i < timeout) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + if (!(swsm & E1000_SWSM_SMBI)) + break; + + usec_delay(50); + i++; + } + + if (i == timeout) { + DEBUGOUT("Driver can't access device - SMBI bit is set.\n"); + return -E1000_ERR_NVM; + } + + /* Get the FW semaphore. */ + for (i = 0; i < timeout; i++) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI); + + /* Semaphore acquired if bit latched */ + if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI) + break; + + usec_delay(50); + } + + if (i == timeout) { + /* Release semaphores */ + e1000_put_hw_semaphore_generic(hw); + DEBUGOUT("Driver can't access the NVM\n"); + return -E1000_ERR_NVM; + } + + return E1000_SUCCESS; +} + +/** + * e1000_put_hw_semaphore_generic - Release hardware semaphore + * @hw: pointer to the HW structure + * + * Release hardware semaphore used to access the PHY or NVM + **/ +void e1000_put_hw_semaphore_generic(struct e1000_hw *hw) +{ + u32 swsm; + + DEBUGFUNC("e1000_put_hw_semaphore_generic"); + + swsm = E1000_READ_REG(hw, E1000_SWSM); + + swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); + + E1000_WRITE_REG(hw, E1000_SWSM, swsm); +} + +/** + * e1000_get_auto_rd_done_generic - Check for auto read completion + * @hw: pointer to the HW structure + * + * Check EEPROM for Auto Read done bit. + **/ +s32 e1000_get_auto_rd_done_generic(struct e1000_hw *hw) +{ + s32 i = 0; + + DEBUGFUNC("e1000_get_auto_rd_done_generic"); + + while (i < AUTO_READ_DONE_TIMEOUT) { + if (E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_AUTO_RD) + break; + msec_delay(1); + i++; + } + + if (i == AUTO_READ_DONE_TIMEOUT) { + DEBUGOUT("Auto read by HW from NVM has not completed.\n"); + return -E1000_ERR_RESET; + } + + return E1000_SUCCESS; +} + +/** + * e1000_valid_led_default_generic - Verify a valid default LED config + * @hw: pointer to the HW structure + * @data: pointer to the NVM (EEPROM) + * + * Read the EEPROM for the current default LED configuration. If the + * LED configuration is not valid, set to a valid LED configuration. + **/ +s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_valid_led_default_generic"); + + ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) + *data = ID_LED_DEFAULT; + + return E1000_SUCCESS; +} + +/** + * e1000_id_led_init_generic - + * @hw: pointer to the HW structure + * + **/ +s32 e1000_id_led_init_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + const u32 ledctl_mask = 0x000000FF; + const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; + const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; + u16 data, i, temp; + const u16 led_mask = 0x0F; + + DEBUGFUNC("e1000_id_led_init_generic"); + + ret_val = hw->nvm.ops.valid_led_default(hw, &data); + if (ret_val) + return ret_val; + + mac->ledctl_default = E1000_READ_REG(hw, E1000_LEDCTL); + mac->ledctl_mode1 = mac->ledctl_default; + mac->ledctl_mode2 = mac->ledctl_default; + + for (i = 0; i < 4; i++) { + temp = (data >> (i << 2)) & led_mask; + switch (temp) { + case ID_LED_ON1_DEF2: + case ID_LED_ON1_ON2: + case ID_LED_ON1_OFF2: + mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode1 |= ledctl_on << (i << 3); + break; + case ID_LED_OFF1_DEF2: + case ID_LED_OFF1_ON2: + case ID_LED_OFF1_OFF2: + mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode1 |= ledctl_off << (i << 3); + break; + default: + /* Do nothing */ + break; + } + switch (temp) { + case ID_LED_DEF1_ON2: + case ID_LED_ON1_ON2: + case ID_LED_OFF1_ON2: + mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode2 |= ledctl_on << (i << 3); + break; + case ID_LED_DEF1_OFF2: + case ID_LED_ON1_OFF2: + case ID_LED_OFF1_OFF2: + mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode2 |= ledctl_off << (i << 3); + break; + default: + /* Do nothing */ + break; + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_setup_led_generic - Configures SW controllable LED + * @hw: pointer to the HW structure + * + * This prepares the SW controllable LED for use and saves the current state + * of the LED so it can be later restored. + **/ +s32 e1000_setup_led_generic(struct e1000_hw *hw) +{ + u32 ledctl; + + DEBUGFUNC("e1000_setup_led_generic"); + + if (hw->mac.ops.setup_led != e1000_setup_led_generic) + return -E1000_ERR_CONFIG; + + if (hw->phy.media_type == e1000_media_type_fiber) { + ledctl = E1000_READ_REG(hw, E1000_LEDCTL); + hw->mac.ledctl_default = ledctl; + /* Turn off LED0 */ + ledctl &= ~(E1000_LEDCTL_LED0_IVRT | E1000_LEDCTL_LED0_BLINK | + E1000_LEDCTL_LED0_MODE_MASK); + ledctl |= (E1000_LEDCTL_MODE_LED_OFF << + E1000_LEDCTL_LED0_MODE_SHIFT); + E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl); + } else if (hw->phy.media_type == e1000_media_type_copper) { + E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1); + } + + return E1000_SUCCESS; +} + +/** + * e1000_cleanup_led_generic - Set LED config to default operation + * @hw: pointer to the HW structure + * + * Remove the current LED configuration and set the LED configuration + * to the default value, saved from the EEPROM. + **/ +s32 e1000_cleanup_led_generic(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_cleanup_led_generic"); + + E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_default); + return E1000_SUCCESS; +} + +/** + * e1000_blink_led_generic - Blink LED + * @hw: pointer to the HW structure + * + * Blink the LEDs which are set to be on. + **/ +s32 e1000_blink_led_generic(struct e1000_hw *hw) +{ + u32 ledctl_blink = 0; + u32 i; + + DEBUGFUNC("e1000_blink_led_generic"); + + if (hw->phy.media_type == e1000_media_type_fiber) { + /* always blink LED0 for PCI-E fiber */ + ledctl_blink = E1000_LEDCTL_LED0_BLINK | + (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); + } else { + /* Set the blink bit for each LED that's "on" (0x0E) + * (or "off" if inverted) in ledctl_mode2. The blink + * logic in hardware only works when mode is set to "on" + * so it must be changed accordingly when the mode is + * "off" and inverted. + */ + ledctl_blink = hw->mac.ledctl_mode2; + for (i = 0; i < 32; i += 8) { + u32 mode = (hw->mac.ledctl_mode2 >> i) & + E1000_LEDCTL_LED0_MODE_MASK; + u32 led_default = hw->mac.ledctl_default >> i; + + if ((!(led_default & E1000_LEDCTL_LED0_IVRT) && + (mode == E1000_LEDCTL_MODE_LED_ON)) || + ((led_default & E1000_LEDCTL_LED0_IVRT) && + (mode == E1000_LEDCTL_MODE_LED_OFF))) { + ledctl_blink &= + ~(E1000_LEDCTL_LED0_MODE_MASK << i); + ledctl_blink |= (E1000_LEDCTL_LED0_BLINK | + E1000_LEDCTL_MODE_LED_ON) << i; + } + } + } + + E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl_blink); + + return E1000_SUCCESS; +} + +/** + * e1000_led_on_generic - Turn LED on + * @hw: pointer to the HW structure + * + * Turn LED on. + **/ +s32 e1000_led_on_generic(struct e1000_hw *hw) +{ + u32 ctrl; + + DEBUGFUNC("e1000_led_on_generic"); + + switch (hw->phy.media_type) { + case e1000_media_type_fiber: + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl &= ~E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + break; + case e1000_media_type_copper: + E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode2); + break; + default: + break; + } + + return E1000_SUCCESS; +} + +/** + * e1000_led_off_generic - Turn LED off + * @hw: pointer to the HW structure + * + * Turn LED off. + **/ +s32 e1000_led_off_generic(struct e1000_hw *hw) +{ + u32 ctrl; + + DEBUGFUNC("e1000_led_off_generic"); + + switch (hw->phy.media_type) { + case e1000_media_type_fiber: + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + break; + case e1000_media_type_copper: + E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1); + break; + default: + break; + } + + return E1000_SUCCESS; +} + +/** + * e1000_set_pcie_no_snoop_generic - Set PCI-express capabilities + * @hw: pointer to the HW structure + * @no_snoop: bitmap of snoop events + * + * Set the PCI-express register to snoop for events enabled in 'no_snoop'. + **/ +void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop) +{ + u32 gcr; + + DEBUGFUNC("e1000_set_pcie_no_snoop_generic"); + + if (no_snoop) { + gcr = E1000_READ_REG(hw, E1000_GCR); + gcr &= ~(PCIE_NO_SNOOP_ALL); + gcr |= no_snoop; + E1000_WRITE_REG(hw, E1000_GCR, gcr); + } +} + +/** + * e1000_disable_pcie_master_generic - Disables PCI-express master access + * @hw: pointer to the HW structure + * + * Returns E1000_SUCCESS if successful, else returns -10 + * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused + * the master requests to be disabled. + * + * Disables PCI-Express master access and verifies there are no pending + * requests. + **/ +s32 e1000_disable_pcie_master_generic(struct e1000_hw *hw) +{ + u32 ctrl; + s32 timeout = MASTER_DISABLE_TIMEOUT; + + DEBUGFUNC("e1000_disable_pcie_master_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + while (timeout) { + if (!(E1000_READ_REG(hw, E1000_STATUS) & + E1000_STATUS_GIO_MASTER_ENABLE)) + break; + usec_delay(100); + timeout--; + } + + if (!timeout) { + DEBUGOUT("Master requests are pending.\n"); + return -E1000_ERR_MASTER_REQUESTS_PENDING; + } + + return E1000_SUCCESS; +} + +/** + * e1000_reset_adaptive_generic - Reset Adaptive Interframe Spacing + * @hw: pointer to the HW structure + * + * Reset the Adaptive Interframe Spacing throttle to default values. + **/ +void e1000_reset_adaptive_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + + DEBUGFUNC("e1000_reset_adaptive_generic"); + + if (!mac->adaptive_ifs) { + DEBUGOUT("Not in Adaptive IFS mode!\n"); + return; + } + + mac->current_ifs_val = 0; + mac->ifs_min_val = IFS_MIN; + mac->ifs_max_val = IFS_MAX; + mac->ifs_step_size = IFS_STEP; + mac->ifs_ratio = IFS_RATIO; + + mac->in_ifs_mode = false; + E1000_WRITE_REG(hw, E1000_AIT, 0); +} + +/** + * e1000_update_adaptive_generic - Update Adaptive Interframe Spacing + * @hw: pointer to the HW structure + * + * Update the Adaptive Interframe Spacing Throttle value based on the + * time between transmitted packets and time between collisions. + **/ +void e1000_update_adaptive_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + + DEBUGFUNC("e1000_update_adaptive_generic"); + + if (!mac->adaptive_ifs) { + DEBUGOUT("Not in Adaptive IFS mode!\n"); + return; + } + + if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) { + if (mac->tx_packet_delta > MIN_NUM_XMITS) { + mac->in_ifs_mode = true; + if (mac->current_ifs_val < mac->ifs_max_val) { + if (!mac->current_ifs_val) + mac->current_ifs_val = mac->ifs_min_val; + else + mac->current_ifs_val += + mac->ifs_step_size; + E1000_WRITE_REG(hw, E1000_AIT, + mac->current_ifs_val); + } + } + } else { + if (mac->in_ifs_mode && + (mac->tx_packet_delta <= MIN_NUM_XMITS)) { + mac->current_ifs_val = 0; + mac->in_ifs_mode = false; + E1000_WRITE_REG(hw, E1000_AIT, 0); + } + } +} + +/** + * e1000_validate_mdi_setting_generic - Verify MDI/MDIx settings + * @hw: pointer to the HW structure + * + * Verify that when not using auto-negotiation that MDI/MDIx is correctly + * set, which is forced to MDI mode only. + **/ +static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_validate_mdi_setting_generic"); + + if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) { + DEBUGOUT("Invalid MDI setting detected\n"); + hw->phy.mdix = 1; + return -E1000_ERR_CONFIG; + } + + return E1000_SUCCESS; +} + +/** + * e1000_validate_mdi_setting_crossover_generic - Verify MDI/MDIx settings + * @hw: pointer to the HW structure + * + * Validate the MDI/MDIx setting, allowing for auto-crossover during forced + * operation. + **/ +s32 e1000_validate_mdi_setting_crossover_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_validate_mdi_setting_crossover_generic"); + + return E1000_SUCCESS; +} + +/** + * e1000_write_8bit_ctrl_reg_generic - Write a 8bit CTRL register + * @hw: pointer to the HW structure + * @reg: 32bit register offset such as E1000_SCTL + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes an address/data control type register. There are several of these + * and they all have the format address << 8 | data and bit 31 is polled for + * completion. + **/ +s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg, + u32 offset, u8 data) +{ + u32 i, regvalue = 0; + + DEBUGFUNC("e1000_write_8bit_ctrl_reg_generic"); + + /* Set up the address and data */ + regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT); + E1000_WRITE_REG(hw, reg, regvalue); + + /* Poll the ready bit to see if the MDI read completed */ + for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) { + usec_delay(5); + regvalue = E1000_READ_REG(hw, reg); + if (regvalue & E1000_GEN_CTL_READY) + break; + } + if (!(regvalue & E1000_GEN_CTL_READY)) { + DEBUGOUT1("Reg %08x did not indicate ready\n", reg); + return -E1000_ERR_PHY; + } + + return E1000_SUCCESS; +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_mac.h b/kernel/linux/kni/ethtool/igb/e1000_mac.h new file mode 100644 index 00000000..a3e78498 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_mac.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_MAC_H_ +#define _E1000_MAC_H_ + +void e1000_init_mac_ops_generic(struct e1000_hw *hw); +void e1000_null_mac_generic(struct e1000_hw *hw); +s32 e1000_null_ops_generic(struct e1000_hw *hw); +s32 e1000_null_link_info(struct e1000_hw *hw, u16 *s, u16 *d); +bool e1000_null_mng_mode(struct e1000_hw *hw); +void e1000_null_update_mc(struct e1000_hw *hw, u8 *h, u32 a); +void e1000_null_write_vfta(struct e1000_hw *hw, u32 a, u32 b); +void e1000_null_rar_set(struct e1000_hw *hw, u8 *h, u32 a); +s32 e1000_blink_led_generic(struct e1000_hw *hw); +s32 e1000_check_for_copper_link_generic(struct e1000_hw *hw); +s32 e1000_check_for_fiber_link_generic(struct e1000_hw *hw); +s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw); +s32 e1000_cleanup_led_generic(struct e1000_hw *hw); +s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw); +s32 e1000_disable_pcie_master_generic(struct e1000_hw *hw); +s32 e1000_force_mac_fc_generic(struct e1000_hw *hw); +s32 e1000_get_auto_rd_done_generic(struct e1000_hw *hw); +s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw); +void e1000_set_lan_id_single_port(struct e1000_hw *hw); +s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw); +s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw *hw, + u16 *speed, u16 *duplex); +s32 e1000_id_led_init_generic(struct e1000_hw *hw); +s32 e1000_led_on_generic(struct e1000_hw *hw); +s32 e1000_led_off_generic(struct e1000_hw *hw); +void e1000_update_mc_addr_list_generic(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count); +s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw); +s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw); +s32 e1000_setup_led_generic(struct e1000_hw *hw); +s32 e1000_setup_link_generic(struct e1000_hw *hw); +s32 e1000_validate_mdi_setting_crossover_generic(struct e1000_hw *hw); +s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg, + u32 offset, u8 data); + +u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr); + +void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw); +void e1000_clear_vfta_generic(struct e1000_hw *hw); +void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count); +void e1000_put_hw_semaphore_generic(struct e1000_hw *hw); +s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw); +void e1000_reset_adaptive_generic(struct e1000_hw *hw); +void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop); +void e1000_update_adaptive_generic(struct e1000_hw *hw); +void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value); + +#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_manage.c b/kernel/linux/kni/ethtool/igb/e1000_manage.c new file mode 100644 index 00000000..2f75bc35 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_manage.c @@ -0,0 +1,539 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_api.h" + +/** + * e1000_calculate_checksum - Calculate checksum for buffer + * @buffer: pointer to EEPROM + * @length: size of EEPROM to calculate a checksum for + * + * Calculates the checksum for some buffer on a specified length. The + * checksum calculated is returned. + **/ +u8 e1000_calculate_checksum(u8 *buffer, u32 length) +{ + u32 i; + u8 sum = 0; + + DEBUGFUNC("e1000_calculate_checksum"); + + if (!buffer) + return 0; + + for (i = 0; i < length; i++) + sum += buffer[i]; + + return (u8) (0 - sum); +} + +/** + * e1000_mng_enable_host_if_generic - Checks host interface is enabled + * @hw: pointer to the HW structure + * + * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND + * + * This function checks whether the HOST IF is enabled for command operation + * and also checks whether the previous command is completed. It busy waits + * in case of previous command is not completed. + **/ +s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw) +{ + u32 hicr; + u8 i; + + DEBUGFUNC("e1000_mng_enable_host_if_generic"); + + if (!hw->mac.arc_subsystem_valid) { + DEBUGOUT("ARC subsystem not valid.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Check that the host interface is enabled. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_EN)) { + DEBUGOUT("E1000_HOST_EN bit disabled.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + /* check the previous command is completed */ + for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_C)) + break; + msec_delay_irq(1); + } + + if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { + DEBUGOUT("Previous command timeout failed .\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + return E1000_SUCCESS; +} + +/** + * e1000_check_mng_mode_generic - Generic check management mode + * @hw: pointer to the HW structure + * + * Reads the firmware semaphore register and returns true (>0) if + * manageability is enabled, else false (0). + **/ +bool e1000_check_mng_mode_generic(struct e1000_hw *hw) +{ + u32 fwsm = E1000_READ_REG(hw, E1000_FWSM); + + DEBUGFUNC("e1000_check_mng_mode_generic"); + + + return (fwsm & E1000_FWSM_MODE_MASK) == + (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); +} + +/** + * e1000_enable_tx_pkt_filtering_generic - Enable packet filtering on Tx + * @hw: pointer to the HW structure + * + * Enables packet filtering on transmit packets if manageability is enabled + * and host interface is enabled. + **/ +bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw) +{ + struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie; + u32 *buffer = (u32 *)&hw->mng_cookie; + u32 offset; + s32 ret_val, hdr_csum, csum; + u8 i, len; + + DEBUGFUNC("e1000_enable_tx_pkt_filtering_generic"); + + hw->mac.tx_pkt_filtering = true; + + /* No manageability, no filtering */ + if (!hw->mac.ops.check_mng_mode(hw)) { + hw->mac.tx_pkt_filtering = false; + return hw->mac.tx_pkt_filtering; + } + + /* If we can't read from the host interface for whatever + * reason, disable filtering. + */ + ret_val = e1000_mng_enable_host_if_generic(hw); + if (ret_val != E1000_SUCCESS) { + hw->mac.tx_pkt_filtering = false; + return hw->mac.tx_pkt_filtering; + } + + /* Read in the header. Length and offset are in dwords. */ + len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2; + offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2; + for (i = 0; i < len; i++) + *(buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, + offset + i); + hdr_csum = hdr->checksum; + hdr->checksum = 0; + csum = e1000_calculate_checksum((u8 *)hdr, + E1000_MNG_DHCP_COOKIE_LENGTH); + /* If either the checksums or signature don't match, then + * the cookie area isn't considered valid, in which case we + * take the safe route of assuming Tx filtering is enabled. + */ + if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { + hw->mac.tx_pkt_filtering = true; + return hw->mac.tx_pkt_filtering; + } + + /* Cookie area is valid, make the final check for filtering. */ + if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) + hw->mac.tx_pkt_filtering = false; + + return hw->mac.tx_pkt_filtering; +} + +/** + * e1000_mng_write_cmd_header_generic - Writes manageability command header + * @hw: pointer to the HW structure + * @hdr: pointer to the host interface command header + * + * Writes the command header after does the checksum calculation. + **/ +s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr) +{ + u16 i, length = sizeof(struct e1000_host_mng_command_header); + + DEBUGFUNC("e1000_mng_write_cmd_header_generic"); + + /* Write the whole command header structure with new checksum. */ + + hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length); + + length >>= 2; + /* Write the relevant command block into the ram area. */ + for (i = 0; i < length; i++) { + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i, + *((u32 *) hdr + i)); + E1000_WRITE_FLUSH(hw); + } + + return E1000_SUCCESS; +} + +/** + * e1000_mng_host_if_write_generic - Write to the manageability host interface + * @hw: pointer to the HW structure + * @buffer: pointer to the host interface buffer + * @length: size of the buffer + * @offset: location in the buffer to write to + * @sum: sum of the data (not checksum) + * + * This function writes the buffer content at the offset given on the host if. + * It also does alignment considerations to do the writes in most efficient + * way. Also fills up the sum of the buffer in *buffer parameter. + **/ +s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer, + u16 length, u16 offset, u8 *sum) +{ + u8 *tmp; + u8 *bufptr = buffer; + u32 data = 0; + u16 remaining, i, j, prev_bytes; + + DEBUGFUNC("e1000_mng_host_if_write_generic"); + + /* sum = only sum of the data and it is not checksum */ + + if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) + return -E1000_ERR_PARAM; + + tmp = (u8 *)&data; + prev_bytes = offset & 0x3; + offset >>= 2; + + if (prev_bytes) { + data = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset); + for (j = prev_bytes; j < sizeof(u32); j++) { + *(tmp + j) = *bufptr++; + *sum += *(tmp + j); + } + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset, data); + length -= j - prev_bytes; + offset++; + } + + remaining = length & 0x3; + length -= remaining; + + /* Calculate length in DWORDs */ + length >>= 2; + + /* The device driver writes the relevant command block into the + * ram area. + */ + for (i = 0; i < length; i++) { + for (j = 0; j < sizeof(u32); j++) { + *(tmp + j) = *bufptr++; + *sum += *(tmp + j); + } + + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i, + data); + } + if (remaining) { + for (j = 0; j < sizeof(u32); j++) { + if (j < remaining) + *(tmp + j) = *bufptr++; + else + *(tmp + j) = 0; + + *sum += *(tmp + j); + } + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i, + data); + } + + return E1000_SUCCESS; +} + +/** + * e1000_mng_write_dhcp_info_generic - Writes DHCP info to host interface + * @hw: pointer to the HW structure + * @buffer: pointer to the host interface + * @length: size of the buffer + * + * Writes the DHCP information to the host interface. + **/ +s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, u8 *buffer, + u16 length) +{ + struct e1000_host_mng_command_header hdr; + s32 ret_val; + u32 hicr; + + DEBUGFUNC("e1000_mng_write_dhcp_info_generic"); + + hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; + hdr.command_length = length; + hdr.reserved1 = 0; + hdr.reserved2 = 0; + hdr.checksum = 0; + + /* Enable the host interface */ + ret_val = e1000_mng_enable_host_if_generic(hw); + if (ret_val) + return ret_val; + + /* Populate the host interface with the contents of "buffer". */ + ret_val = e1000_mng_host_if_write_generic(hw, buffer, length, + sizeof(hdr), &(hdr.checksum)); + if (ret_val) + return ret_val; + + /* Write the manageability command header */ + ret_val = e1000_mng_write_cmd_header_generic(hw, &hdr); + if (ret_val) + return ret_val; + + /* Tell the ARC a new command is pending. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); + + return E1000_SUCCESS; +} + +/** + * e1000_enable_mng_pass_thru - Check if management passthrough is needed + * @hw: pointer to the HW structure + * + * Verifies the hardware needs to leave interface enabled so that frames can + * be directed to and from the management interface. + **/ +bool e1000_enable_mng_pass_thru(struct e1000_hw *hw) +{ + u32 manc; + u32 fwsm, factps; + + DEBUGFUNC("e1000_enable_mng_pass_thru"); + + if (!hw->mac.asf_firmware_present) + return false; + + manc = E1000_READ_REG(hw, E1000_MANC); + + if (!(manc & E1000_MANC_RCV_TCO_EN)) + return false; + + if (hw->mac.has_fwsm) { + fwsm = E1000_READ_REG(hw, E1000_FWSM); + factps = E1000_READ_REG(hw, E1000_FACTPS); + + if (!(factps & E1000_FACTPS_MNGCG) && + ((fwsm & E1000_FWSM_MODE_MASK) == + (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) + return true; + } else if ((manc & E1000_MANC_SMBUS_EN) && + !(manc & E1000_MANC_ASF_EN)) { + return true; + } + + return false; +} + +/** + * e1000_host_interface_command - Writes buffer to host interface + * @hw: pointer to the HW structure + * @buffer: contains a command to write + * @length: the byte length of the buffer, must be multiple of 4 bytes + * + * Writes a buffer to the Host Interface. Upon success, returns E1000_SUCCESS + * else returns E1000_ERR_HOST_INTERFACE_COMMAND. + **/ +s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length) +{ + u32 hicr, i; + + DEBUGFUNC("e1000_host_interface_command"); + + if (!(hw->mac.arc_subsystem_valid)) { + DEBUGOUT("Hardware doesn't support host interface command.\n"); + return E1000_SUCCESS; + } + + if (!hw->mac.asf_firmware_present) { + DEBUGOUT("Firmware is not present.\n"); + return E1000_SUCCESS; + } + + if (length == 0 || length & 0x3 || + length > E1000_HI_MAX_BLOCK_BYTE_LENGTH) { + DEBUGOUT("Buffer length failure.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Check that the host interface is enabled. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_EN)) { + DEBUGOUT("E1000_HOST_EN bit disabled.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Calculate length in DWORDs */ + length >>= 2; + + /* The device driver writes the relevant command block + * into the ram area. + */ + for (i = 0; i < length; i++) + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i, + *((u32 *)buffer + i)); + + /* Setting this bit tells the ARC that a new command is pending. */ + E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); + + for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_C)) + break; + msec_delay(1); + } + + /* Check command successful completion. */ + if (i == E1000_HI_COMMAND_TIMEOUT || + (!(E1000_READ_REG(hw, E1000_HICR) & E1000_HICR_SV))) { + DEBUGOUT("Command has failed with no status valid.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + for (i = 0; i < length; i++) + *((u32 *)buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, + E1000_HOST_IF, + i); + + return E1000_SUCCESS; +} +/** + * e1000_load_firmware - Writes proxy FW code buffer to host interface + * and execute. + * @hw: pointer to the HW structure + * @buffer: contains a firmware to write + * @length: the byte length of the buffer, must be multiple of 4 bytes + * + * Upon success returns E1000_SUCCESS, returns E1000_ERR_CONFIG if not enabled + * in HW else returns E1000_ERR_HOST_INTERFACE_COMMAND. + **/ +s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length) +{ + u32 hicr, hibba, fwsm, icr, i; + + DEBUGFUNC("e1000_load_firmware"); + + if (hw->mac.type < e1000_i210) { + DEBUGOUT("Hardware doesn't support loading FW by the driver\n"); + return -E1000_ERR_CONFIG; + } + + /* Check that the host interface is enabled. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_EN)) { + DEBUGOUT("E1000_HOST_EN bit disabled.\n"); + return -E1000_ERR_CONFIG; + } + if (!(hicr & E1000_HICR_MEMORY_BASE_EN)) { + DEBUGOUT("E1000_HICR_MEMORY_BASE_EN bit disabled.\n"); + return -E1000_ERR_CONFIG; + } + + if (length == 0 || length & 0x3 || length > E1000_HI_FW_MAX_LENGTH) { + DEBUGOUT("Buffer length failure.\n"); + return -E1000_ERR_INVALID_ARGUMENT; + } + + /* Clear notification from ROM-FW by reading ICR register */ + icr = E1000_READ_REG(hw, E1000_ICR_V2); + + /* Reset ROM-FW */ + hicr = E1000_READ_REG(hw, E1000_HICR); + hicr |= E1000_HICR_FW_RESET_ENABLE; + E1000_WRITE_REG(hw, E1000_HICR, hicr); + hicr |= E1000_HICR_FW_RESET; + E1000_WRITE_REG(hw, E1000_HICR, hicr); + E1000_WRITE_FLUSH(hw); + + /* Wait till MAC notifies about its readiness after ROM-FW reset */ + for (i = 0; i < (E1000_HI_COMMAND_TIMEOUT * 2); i++) { + icr = E1000_READ_REG(hw, E1000_ICR_V2); + if (icr & E1000_ICR_MNG) + break; + msec_delay(1); + } + + /* Check for timeout */ + if (i == E1000_HI_COMMAND_TIMEOUT) { + DEBUGOUT("FW reset failed.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Wait till MAC is ready to accept new FW code */ + for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { + fwsm = E1000_READ_REG(hw, E1000_FWSM); + if ((fwsm & E1000_FWSM_FW_VALID) && + ((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT == + E1000_FWSM_HI_EN_ONLY_MODE)) + break; + msec_delay(1); + } + + /* Check for timeout */ + if (i == E1000_HI_COMMAND_TIMEOUT) { + DEBUGOUT("FW reset failed.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Calculate length in DWORDs */ + length >>= 2; + + /* The device driver writes the relevant FW code block + * into the ram area in DWORDs via 1kB ram addressing window. + */ + for (i = 0; i < length; i++) { + if (!(i % E1000_HI_FW_BLOCK_DWORD_LENGTH)) { + /* Point to correct 1kB ram window */ + hibba = E1000_HI_FW_BASE_ADDRESS + + ((E1000_HI_FW_BLOCK_DWORD_LENGTH << 2) * + (i / E1000_HI_FW_BLOCK_DWORD_LENGTH)); + + E1000_WRITE_REG(hw, E1000_HIBBA, hibba); + } + + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, + i % E1000_HI_FW_BLOCK_DWORD_LENGTH, + *((u32 *)buffer + i)); + } + + /* Setting this bit tells the ARC that a new FW is ready to execute. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); + + for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_C)) + break; + msec_delay(1); + } + + /* Check for successful FW start. */ + if (i == E1000_HI_COMMAND_TIMEOUT) { + DEBUGOUT("New FW did not start within timeout period.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + return E1000_SUCCESS; +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_manage.h b/kernel/linux/kni/ethtool/igb/e1000_manage.h new file mode 100644 index 00000000..9f27b934 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_manage.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_MANAGE_H_ +#define _E1000_MANAGE_H_ + +bool e1000_check_mng_mode_generic(struct e1000_hw *hw); +bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw); +s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw); +s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer, + u16 length, u16 offset, u8 *sum); +s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr); +s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, + u8 *buffer, u16 length); +bool e1000_enable_mng_pass_thru(struct e1000_hw *hw); +u8 e1000_calculate_checksum(u8 *buffer, u32 length); +s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length); +s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length); + +enum e1000_mng_mode { + e1000_mng_mode_none = 0, + e1000_mng_mode_asf, + e1000_mng_mode_pt, + e1000_mng_mode_ipmi, + e1000_mng_mode_host_if_only +}; + +#define E1000_FACTPS_MNGCG 0x20000000 + +#define E1000_FWSM_MODE_MASK 0xE +#define E1000_FWSM_MODE_SHIFT 1 +#define E1000_FWSM_FW_VALID 0x00008000 +#define E1000_FWSM_HI_EN_ONLY_MODE 0x4 + +#define E1000_MNG_IAMT_MODE 0x3 +#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 +#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 +#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 +#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 +#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1 +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 + +#define E1000_VFTA_ENTRY_SHIFT 5 +#define E1000_VFTA_ENTRY_MASK 0x7F +#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F + +#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */ +#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */ +#define E1000_HI_COMMAND_TIMEOUT 500 /* Process HI cmd limit */ +#define E1000_HI_FW_BASE_ADDRESS 0x10000 +#define E1000_HI_FW_MAX_LENGTH (64 * 1024) /* Num of bytes */ +#define E1000_HI_FW_BLOCK_DWORD_LENGTH 256 /* Num of DWORDs per page */ +#define E1000_HICR_MEMORY_BASE_EN 0x200 /* MB Enable bit - RO */ +#define E1000_HICR_EN 0x01 /* Enable bit - RO */ +/* Driver sets this bit when done to put command in RAM */ +#define E1000_HICR_C 0x02 +#define E1000_HICR_SV 0x04 /* Status Validity */ +#define E1000_HICR_FW_RESET_ENABLE 0x40 +#define E1000_HICR_FW_RESET 0x80 + +/* Intel(R) Active Management Technology signature */ +#define E1000_IAMT_SIGNATURE 0x544D4149 + +#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_mbx.c b/kernel/linux/kni/ethtool/igb/e1000_mbx.c new file mode 100644 index 00000000..1be44349 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_mbx.c @@ -0,0 +1,510 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_mbx.h" + +/** + * e1000_null_mbx_check_for_flag - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +static s32 e1000_null_mbx_check_for_flag(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG mbx_id) +{ + DEBUGFUNC("e1000_null_mbx_check_flag"); + + return E1000_SUCCESS; +} + +/** + * e1000_null_mbx_transact - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +static s32 e1000_null_mbx_transact(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG *msg, + u16 E1000_UNUSEDARG size, + u16 E1000_UNUSEDARG mbx_id) +{ + DEBUGFUNC("e1000_null_mbx_rw_msg"); + + return E1000_SUCCESS; +} + +/** + * e1000_read_mbx - Reads a message from the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to read + * + * returns SUCCESS if it successfully read message from buffer + **/ +s32 e1000_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_read_mbx"); + + /* limit read to size of mailbox */ + if (size > mbx->size) + size = mbx->size; + + if (mbx->ops.read) + ret_val = mbx->ops.read(hw, msg, size, mbx_id); + + return ret_val; +} + +/** + * e1000_write_mbx - Write a message to the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully copied message into the buffer + **/ +s32 e1000_write_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_write_mbx"); + + if (size > mbx->size) + ret_val = -E1000_ERR_MBX; + + else if (mbx->ops.write) + ret_val = mbx->ops.write(hw, msg, size, mbx_id); + + return ret_val; +} + +/** + * e1000_check_for_msg - checks to see if someone sent us mail + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the Status bit was found or else ERR_MBX + **/ +s32 e1000_check_for_msg(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_msg"); + + if (mbx->ops.check_for_msg) + ret_val = mbx->ops.check_for_msg(hw, mbx_id); + + return ret_val; +} + +/** + * e1000_check_for_ack - checks to see if someone sent us ACK + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the Status bit was found or else ERR_MBX + **/ +s32 e1000_check_for_ack(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_ack"); + + if (mbx->ops.check_for_ack) + ret_val = mbx->ops.check_for_ack(hw, mbx_id); + + return ret_val; +} + +/** + * e1000_check_for_rst - checks to see if other side has reset + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the Status bit was found or else ERR_MBX + **/ +s32 e1000_check_for_rst(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_rst"); + + if (mbx->ops.check_for_rst) + ret_val = mbx->ops.check_for_rst(hw, mbx_id); + + return ret_val; +} + +/** + * e1000_poll_for_msg - Wait for message notification + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully received a message notification + **/ +static s32 e1000_poll_for_msg(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + int countdown = mbx->timeout; + + DEBUGFUNC("e1000_poll_for_msg"); + + if (!countdown || !mbx->ops.check_for_msg) + goto out; + + while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) { + countdown--; + if (!countdown) + break; + usec_delay(mbx->usec_delay); + } + + /* if we failed, all future posted messages fail until reset */ + if (!countdown) + mbx->timeout = 0; +out: + return countdown ? E1000_SUCCESS : -E1000_ERR_MBX; +} + +/** + * e1000_poll_for_ack - Wait for message acknowledgement + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully received a message acknowledgement + **/ +static s32 e1000_poll_for_ack(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + int countdown = mbx->timeout; + + DEBUGFUNC("e1000_poll_for_ack"); + + if (!countdown || !mbx->ops.check_for_ack) + goto out; + + while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) { + countdown--; + if (!countdown) + break; + usec_delay(mbx->usec_delay); + } + + /* if we failed, all future posted messages fail until reset */ + if (!countdown) + mbx->timeout = 0; +out: + return countdown ? E1000_SUCCESS : -E1000_ERR_MBX; +} + +/** + * e1000_read_posted_mbx - Wait for message notification and receive message + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully received a message notification and + * copied it into the receive buffer. + **/ +s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_read_posted_mbx"); + + if (!mbx->ops.read) + goto out; + + ret_val = e1000_poll_for_msg(hw, mbx_id); + + /* if ack received read message, otherwise we timed out */ + if (!ret_val) + ret_val = mbx->ops.read(hw, msg, size, mbx_id); +out: + return ret_val; +} + +/** + * e1000_write_posted_mbx - Write a message to the mailbox, wait for ack + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully copied message into the buffer and + * received an ack to that message within delay * timeout period + **/ +s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_write_posted_mbx"); + + /* exit if either we can't write or there isn't a defined timeout */ + if (!mbx->ops.write || !mbx->timeout) + goto out; + + /* send msg */ + ret_val = mbx->ops.write(hw, msg, size, mbx_id); + + /* if msg sent wait until we receive an ack */ + if (!ret_val) + ret_val = e1000_poll_for_ack(hw, mbx_id); +out: + return ret_val; +} + +/** + * e1000_init_mbx_ops_generic - Initialize mbx function pointers + * @hw: pointer to the HW structure + * + * Sets the function pointers to no-op functions + **/ +void e1000_init_mbx_ops_generic(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + mbx->ops.init_params = e1000_null_ops_generic; + mbx->ops.read = e1000_null_mbx_transact; + mbx->ops.write = e1000_null_mbx_transact; + mbx->ops.check_for_msg = e1000_null_mbx_check_for_flag; + mbx->ops.check_for_ack = e1000_null_mbx_check_for_flag; + mbx->ops.check_for_rst = e1000_null_mbx_check_for_flag; + mbx->ops.read_posted = e1000_read_posted_mbx; + mbx->ops.write_posted = e1000_write_posted_mbx; +} + +static s32 e1000_check_for_bit_pf(struct e1000_hw *hw, u32 mask) +{ + u32 mbvficr = E1000_READ_REG(hw, E1000_MBVFICR); + s32 ret_val = -E1000_ERR_MBX; + + if (mbvficr & mask) { + ret_val = E1000_SUCCESS; + E1000_WRITE_REG(hw, E1000_MBVFICR, mask); + } + + return ret_val; +} + +/** + * e1000_check_for_msg_pf - checks to see if the VF has sent mail + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + **/ +static s32 e1000_check_for_msg_pf(struct e1000_hw *hw, u16 vf_number) +{ + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_msg_pf"); + + if (!e1000_check_for_bit_pf(hw, E1000_MBVFICR_VFREQ_VF1 << vf_number)) { + ret_val = E1000_SUCCESS; + hw->mbx.stats.reqs++; + } + + return ret_val; +} + +/** + * e1000_check_for_ack_pf - checks to see if the VF has ACKed + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + **/ +static s32 e1000_check_for_ack_pf(struct e1000_hw *hw, u16 vf_number) +{ + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_ack_pf"); + + if (!e1000_check_for_bit_pf(hw, E1000_MBVFICR_VFACK_VF1 << vf_number)) { + ret_val = E1000_SUCCESS; + hw->mbx.stats.acks++; + } + + return ret_val; +} + +/** + * e1000_check_for_rst_pf - checks to see if the VF has reset + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + **/ +static s32 e1000_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number) +{ + u32 vflre = E1000_READ_REG(hw, E1000_VFLRE); + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_rst_pf"); + + if (vflre & (1 << vf_number)) { + ret_val = E1000_SUCCESS; + E1000_WRITE_REG(hw, E1000_VFLRE, (1 << vf_number)); + hw->mbx.stats.rsts++; + } + + return ret_val; +} + +/** + * e1000_obtain_mbx_lock_pf - obtain mailbox lock + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * return SUCCESS if we obtained the mailbox lock + **/ +static s32 e1000_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number) +{ + s32 ret_val = -E1000_ERR_MBX; + u32 p2v_mailbox; + + DEBUGFUNC("e1000_obtain_mbx_lock_pf"); + + /* Take ownership of the buffer */ + E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU); + + /* reserve mailbox for vf use */ + p2v_mailbox = E1000_READ_REG(hw, E1000_P2VMAILBOX(vf_number)); + if (p2v_mailbox & E1000_P2VMAILBOX_PFU) + ret_val = E1000_SUCCESS; + + return ret_val; +} + +/** + * e1000_write_mbx_pf - Places a message in the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @vf_number: the VF index + * + * returns SUCCESS if it successfully copied message into the buffer + **/ +static s32 e1000_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, + u16 vf_number) +{ + s32 ret_val; + u16 i; + + DEBUGFUNC("e1000_write_mbx_pf"); + + /* lock the mailbox to prevent pf/vf race condition */ + ret_val = e1000_obtain_mbx_lock_pf(hw, vf_number); + if (ret_val) + goto out_no_write; + + /* flush msg and acks as we are overwriting the message buffer */ + e1000_check_for_msg_pf(hw, vf_number); + e1000_check_for_ack_pf(hw, vf_number); + + /* copy the caller specified message to the mailbox memory buffer */ + for (i = 0; i < size; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_VMBMEM(vf_number), i, msg[i]); + + /* Interrupt VF to tell it a message has been sent and release buffer*/ + E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_STS); + + /* update stats */ + hw->mbx.stats.msgs_tx++; + +out_no_write: + return ret_val; + +} + +/** + * e1000_read_mbx_pf - Read a message from the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @vf_number: the VF index + * + * This function copies a message from the mailbox buffer to the caller's + * memory buffer. The presumption is that the caller knows that there was + * a message due to a VF request so no polling for message is needed. + **/ +static s32 e1000_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, + u16 vf_number) +{ + s32 ret_val; + u16 i; + + DEBUGFUNC("e1000_read_mbx_pf"); + + /* lock the mailbox to prevent pf/vf race condition */ + ret_val = e1000_obtain_mbx_lock_pf(hw, vf_number); + if (ret_val) + goto out_no_read; + + /* copy the message to the mailbox memory buffer */ + for (i = 0; i < size; i++) + msg[i] = E1000_READ_REG_ARRAY(hw, E1000_VMBMEM(vf_number), i); + + /* Acknowledge the message and release buffer */ + E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_ACK); + + /* update stats */ + hw->mbx.stats.msgs_rx++; + +out_no_read: + return ret_val; +} + +/** + * e1000_init_mbx_params_pf - set initial values for pf mailbox + * @hw: pointer to the HW structure + * + * Initializes the hw->mbx struct to correct values for pf mailbox + */ +s32 e1000_init_mbx_params_pf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + + switch (hw->mac.type) { + case e1000_82576: + case e1000_i350: + case e1000_i354: + mbx->timeout = 0; + mbx->usec_delay = 0; + + mbx->size = E1000_VFMAILBOX_SIZE; + + mbx->ops.read = e1000_read_mbx_pf; + mbx->ops.write = e1000_write_mbx_pf; + mbx->ops.read_posted = e1000_read_posted_mbx; + mbx->ops.write_posted = e1000_write_posted_mbx; + mbx->ops.check_for_msg = e1000_check_for_msg_pf; + mbx->ops.check_for_ack = e1000_check_for_ack_pf; + mbx->ops.check_for_rst = e1000_check_for_rst_pf; + + mbx->stats.msgs_tx = 0; + mbx->stats.msgs_rx = 0; + mbx->stats.reqs = 0; + mbx->stats.acks = 0; + mbx->stats.rsts = 0; + default: + return E1000_SUCCESS; + } +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_mbx.h b/kernel/linux/kni/ethtool/igb/e1000_mbx.h new file mode 100644 index 00000000..5951f18f --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_mbx.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_MBX_H_ +#define _E1000_MBX_H_ + +#include "e1000_api.h" + +#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */ +#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */ +#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ +#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ +#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */ + +#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */ +#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */ +#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */ +#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */ + +#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */ + +/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the + * PF. The reverse is true if it is E1000_PF_*. + * Message ACK's are the value or'd with 0xF0000000 + */ +/* Msgs below or'd with this are the ACK */ +#define E1000_VT_MSGTYPE_ACK 0x80000000 +/* Msgs below or'd with this are the NACK */ +#define E1000_VT_MSGTYPE_NACK 0x40000000 +/* Indicates that VF is still clear to send requests */ +#define E1000_VT_MSGTYPE_CTS 0x20000000 +#define E1000_VT_MSGINFO_SHIFT 16 +/* bits 23:16 are used for extra info for certain messages */ +#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT) + +#define E1000_VF_RESET 0x01 /* VF requests reset */ +#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */ +#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */ +#define E1000_VF_SET_MULTICAST_COUNT_MASK (0x1F << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_MULTICAST_OVERFLOW (0x80 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */ +#define E1000_VF_SET_VLAN_ADD (0x01 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_LPE 0x05 /* reqs to set VMOLR.LPE */ +#define E1000_VF_SET_PROMISC 0x06 /* reqs to clear VMOLR.ROPE/MPME*/ +#define E1000_VF_SET_PROMISC_UNICAST (0x01 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT) + +#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */ + +#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */ +#define E1000_VF_MBX_INIT_DELAY 500 /* microseconds between retries */ + +s32 e1000_read_mbx(struct e1000_hw *, u32 *, u16, u16); +s32 e1000_write_mbx(struct e1000_hw *, u32 *, u16, u16); +s32 e1000_read_posted_mbx(struct e1000_hw *, u32 *, u16, u16); +s32 e1000_write_posted_mbx(struct e1000_hw *, u32 *, u16, u16); +s32 e1000_check_for_msg(struct e1000_hw *, u16); +s32 e1000_check_for_ack(struct e1000_hw *, u16); +s32 e1000_check_for_rst(struct e1000_hw *, u16); +void e1000_init_mbx_ops_generic(struct e1000_hw *hw); +s32 e1000_init_mbx_params_pf(struct e1000_hw *); + +#endif /* _E1000_MBX_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_nvm.c b/kernel/linux/kni/ethtool/igb/e1000_nvm.c new file mode 100644 index 00000000..78c3fc0e --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_nvm.c @@ -0,0 +1,950 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_api.h" + +static void e1000_reload_nvm_generic(struct e1000_hw *hw); + +/** + * e1000_init_nvm_ops_generic - Initialize NVM function pointers + * @hw: pointer to the HW structure + * + * Setups up the function pointers to no-op functions + **/ +void e1000_init_nvm_ops_generic(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + DEBUGFUNC("e1000_init_nvm_ops_generic"); + + /* Initialize function pointers */ + nvm->ops.init_params = e1000_null_ops_generic; + nvm->ops.acquire = e1000_null_ops_generic; + nvm->ops.read = e1000_null_read_nvm; + nvm->ops.release = e1000_null_nvm_generic; + nvm->ops.reload = e1000_reload_nvm_generic; + nvm->ops.update = e1000_null_ops_generic; + nvm->ops.valid_led_default = e1000_null_led_default; + nvm->ops.validate = e1000_null_ops_generic; + nvm->ops.write = e1000_null_write_nvm; +} + +/** + * e1000_null_nvm_read - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_read_nvm(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b, + u16 E1000_UNUSEDARG *c) +{ + DEBUGFUNC("e1000_null_read_nvm"); + return E1000_SUCCESS; +} + +/** + * e1000_null_nvm_generic - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_nvm_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_nvm_generic"); + return; +} + +/** + * e1000_null_led_default - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_led_default(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG *data) +{ + DEBUGFUNC("e1000_null_led_default"); + return E1000_SUCCESS; +} + +/** + * e1000_null_write_nvm - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_write_nvm(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b, + u16 E1000_UNUSEDARG *c) +{ + DEBUGFUNC("e1000_null_write_nvm"); + return E1000_SUCCESS; +} + +/** + * e1000_raise_eec_clk - Raise EEPROM clock + * @hw: pointer to the HW structure + * @eecd: pointer to the EEPROM + * + * Enable/Raise the EEPROM clock bit. + **/ +static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) +{ + *eecd = *eecd | E1000_EECD_SK; + E1000_WRITE_REG(hw, E1000_EECD, *eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(hw->nvm.delay_usec); +} + +/** + * e1000_lower_eec_clk - Lower EEPROM clock + * @hw: pointer to the HW structure + * @eecd: pointer to the EEPROM + * + * Clear/Lower the EEPROM clock bit. + **/ +static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) +{ + *eecd = *eecd & ~E1000_EECD_SK; + E1000_WRITE_REG(hw, E1000_EECD, *eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(hw->nvm.delay_usec); +} + +/** + * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM + * @hw: pointer to the HW structure + * @data: data to send to the EEPROM + * @count: number of bits to shift out + * + * We need to shift 'count' bits out to the EEPROM. So, the value in the + * "data" parameter will be shifted out to the EEPROM one bit at a time. + * In order to do this, "data" must be broken down into bits. + **/ +static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + u32 mask; + + DEBUGFUNC("e1000_shift_out_eec_bits"); + + mask = 0x01 << (count - 1); + if (nvm->type == e1000_nvm_eeprom_spi) + eecd |= E1000_EECD_DO; + + do { + eecd &= ~E1000_EECD_DI; + + if (data & mask) + eecd |= E1000_EECD_DI; + + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + + usec_delay(nvm->delay_usec); + + e1000_raise_eec_clk(hw, &eecd); + e1000_lower_eec_clk(hw, &eecd); + + mask >>= 1; + } while (mask); + + eecd &= ~E1000_EECD_DI; + E1000_WRITE_REG(hw, E1000_EECD, eecd); +} + +/** + * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM + * @hw: pointer to the HW structure + * @count: number of bits to shift in + * + * In order to read a register from the EEPROM, we need to shift 'count' bits + * in from the EEPROM. Bits are "shifted in" by raising the clock input to + * the EEPROM (setting the SK bit), and then reading the value of the data out + * "DO" bit. During this "shifting in" process the data in "DI" bit should + * always be clear. + **/ +static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count) +{ + u32 eecd; + u32 i; + u16 data; + + DEBUGFUNC("e1000_shift_in_eec_bits"); + + eecd = E1000_READ_REG(hw, E1000_EECD); + + eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); + data = 0; + + for (i = 0; i < count; i++) { + data <<= 1; + e1000_raise_eec_clk(hw, &eecd); + + eecd = E1000_READ_REG(hw, E1000_EECD); + + eecd &= ~E1000_EECD_DI; + if (eecd & E1000_EECD_DO) + data |= 1; + + e1000_lower_eec_clk(hw, &eecd); + } + + return data; +} + +/** + * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion + * @hw: pointer to the HW structure + * @ee_reg: EEPROM flag for polling + * + * Polls the EEPROM status bit for either read or write completion based + * upon the value of 'ee_reg'. + **/ +s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) +{ + u32 attempts = 100000; + u32 i, reg = 0; + + DEBUGFUNC("e1000_poll_eerd_eewr_done"); + + for (i = 0; i < attempts; i++) { + if (ee_reg == E1000_NVM_POLL_READ) + reg = E1000_READ_REG(hw, E1000_EERD); + else + reg = E1000_READ_REG(hw, E1000_EEWR); + + if (reg & E1000_NVM_RW_REG_DONE) + return E1000_SUCCESS; + + usec_delay(5); + } + + return -E1000_ERR_NVM; +} + +/** + * e1000_acquire_nvm_generic - Generic request for access to EEPROM + * @hw: pointer to the HW structure + * + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -E1000_ERR_NVM (-1). + **/ +s32 e1000_acquire_nvm_generic(struct e1000_hw *hw) +{ + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + s32 timeout = E1000_NVM_GRANT_ATTEMPTS; + + DEBUGFUNC("e1000_acquire_nvm_generic"); + + E1000_WRITE_REG(hw, E1000_EECD, eecd | E1000_EECD_REQ); + eecd = E1000_READ_REG(hw, E1000_EECD); + + while (timeout) { + if (eecd & E1000_EECD_GNT) + break; + usec_delay(5); + eecd = E1000_READ_REG(hw, E1000_EECD); + timeout--; + } + + if (!timeout) { + eecd &= ~E1000_EECD_REQ; + E1000_WRITE_REG(hw, E1000_EECD, eecd); + DEBUGOUT("Could not acquire NVM grant\n"); + return -E1000_ERR_NVM; + } + + return E1000_SUCCESS; +} + +/** + * e1000_standby_nvm - Return EEPROM to standby state + * @hw: pointer to the HW structure + * + * Return the EEPROM to a standby state. + **/ +static void e1000_standby_nvm(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + + DEBUGFUNC("e1000_standby_nvm"); + + if (nvm->type == e1000_nvm_eeprom_spi) { + /* Toggle CS to flush commands */ + eecd |= E1000_EECD_CS; + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(nvm->delay_usec); + eecd &= ~E1000_EECD_CS; + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(nvm->delay_usec); + } +} + +/** + * e1000_stop_nvm - Terminate EEPROM command + * @hw: pointer to the HW structure + * + * Terminates the current command by inverting the EEPROM's chip select pin. + **/ +static void e1000_stop_nvm(struct e1000_hw *hw) +{ + u32 eecd; + + DEBUGFUNC("e1000_stop_nvm"); + + eecd = E1000_READ_REG(hw, E1000_EECD); + if (hw->nvm.type == e1000_nvm_eeprom_spi) { + /* Pull CS high */ + eecd |= E1000_EECD_CS; + e1000_lower_eec_clk(hw, &eecd); + } +} + +/** + * e1000_release_nvm_generic - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit. + **/ +void e1000_release_nvm_generic(struct e1000_hw *hw) +{ + u32 eecd; + + DEBUGFUNC("e1000_release_nvm_generic"); + + e1000_stop_nvm(hw); + + eecd = E1000_READ_REG(hw, E1000_EECD); + eecd &= ~E1000_EECD_REQ; + E1000_WRITE_REG(hw, E1000_EECD, eecd); +} + +/** + * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write + * @hw: pointer to the HW structure + * + * Setups the EEPROM for reading and writing. + **/ +static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + u8 spi_stat_reg; + + DEBUGFUNC("e1000_ready_nvm_eeprom"); + + if (nvm->type == e1000_nvm_eeprom_spi) { + u16 timeout = NVM_MAX_RETRY_SPI; + + /* Clear SK and CS */ + eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(1); + + /* Read "Status Register" repeatedly until the LSB is cleared. + * The EEPROM will signal that the command has been completed + * by clearing bit 0 of the internal status register. If it's + * not cleared within 'timeout', then error out. + */ + while (timeout) { + e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, + hw->nvm.opcode_bits); + spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8); + if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) + break; + + usec_delay(5); + e1000_standby_nvm(hw); + timeout--; + } + + if (!timeout) { + DEBUGOUT("SPI NVM Status error\n"); + return -E1000_ERR_NVM; + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_nvm_spi - Read EEPROM's using SPI + * @hw: pointer to the HW structure + * @offset: offset of word in the EEPROM to read + * @words: number of words to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM. + **/ +s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i = 0; + s32 ret_val; + u16 word_in; + u8 read_opcode = NVM_READ_OPCODE_SPI; + + DEBUGFUNC("e1000_read_nvm_spi"); + + /* A check for invalid values: offset too large, too many words, + * and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + ret_val = nvm->ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_ready_nvm_eeprom(hw); + if (ret_val) + goto release; + + e1000_standby_nvm(hw); + + if ((nvm->address_bits == 8) && (offset >= 128)) + read_opcode |= NVM_A8_OPCODE_SPI; + + /* Send the READ command (opcode + addr) */ + e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits); + e1000_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits); + + /* Read the data. SPI NVMs increment the address with each byte + * read and will roll over if reading beyond the end. This allows + * us to read the whole NVM from any offset + */ + for (i = 0; i < words; i++) { + word_in = e1000_shift_in_eec_bits(hw, 16); + data[i] = (word_in >> 8) | (word_in << 8); + } + +release: + nvm->ops.release(hw); + + return ret_val; +} + +/** + * e1000_read_nvm_eerd - Reads EEPROM using EERD register + * @hw: pointer to the HW structure + * @offset: offset of word in the EEPROM to read + * @words: number of words to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i, eerd = 0; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_read_nvm_eerd"); + + /* A check for invalid values: offset too large, too many words, + * too many words for the offset, and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + for (i = 0; i < words; i++) { + eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + + E1000_NVM_RW_REG_START; + + E1000_WRITE_REG(hw, E1000_EERD, eerd); + ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); + if (ret_val) + break; + + data[i] = (E1000_READ_REG(hw, E1000_EERD) >> + E1000_NVM_RW_REG_DATA); + } + + return ret_val; +} + +/** + * e1000_write_nvm_spi - Write to EEPROM using SPI + * @hw: pointer to the HW structure + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the EEPROM + * + * Writes data to EEPROM at offset using SPI interface. + * + * If e1000_update_nvm_checksum is not called after this function , the + * EEPROM will most likely contain an invalid checksum. + **/ +s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + s32 ret_val = -E1000_ERR_NVM; + u16 widx = 0; + + DEBUGFUNC("e1000_write_nvm_spi"); + + /* A check for invalid values: offset too large, too many words, + * and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + while (widx < words) { + u8 write_opcode = NVM_WRITE_OPCODE_SPI; + + ret_val = nvm->ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_ready_nvm_eeprom(hw); + if (ret_val) { + nvm->ops.release(hw); + return ret_val; + } + + e1000_standby_nvm(hw); + + /* Send the WRITE ENABLE command (8 bit opcode) */ + e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, + nvm->opcode_bits); + + e1000_standby_nvm(hw); + + /* Some SPI eeproms use the 8th address bit embedded in the + * opcode + */ + if ((nvm->address_bits == 8) && (offset >= 128)) + write_opcode |= NVM_A8_OPCODE_SPI; + + /* Send the Write command (8-bit opcode + addr) */ + e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); + e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), + nvm->address_bits); + + /* Loop to allow for up to whole page write of eeprom */ + while (widx < words) { + u16 word_out = data[widx]; + word_out = (word_out >> 8) | (word_out << 8); + e1000_shift_out_eec_bits(hw, word_out, 16); + widx++; + + if ((((offset + widx) * 2) % nvm->page_size) == 0) { + e1000_standby_nvm(hw); + break; + } + } + msec_delay(10); + nvm->ops.release(hw); + } + + return ret_val; +} + +/** + * e1000_read_pba_string_generic - Read device part number + * @hw: pointer to the HW structure + * @pba_num: pointer to device part number + * @pba_num_size: size of part number buffer + * + * Reads the product board assembly (PBA) number from the EEPROM and stores + * the value in pba_num. + **/ +s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, + u32 pba_num_size) +{ + s32 ret_val; + u16 nvm_data; + u16 pba_ptr; + u16 offset; + u16 length; + + DEBUGFUNC("e1000_read_pba_string_generic"); + + if (pba_num == NULL) { + DEBUGOUT("PBA string buffer was null\n"); + return -E1000_ERR_INVALID_ARGUMENT; + } + + ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + /* if nvm_data is not ptr guard the PBA must be in legacy format which + * means pba_ptr is actually our second data word for the PBA number + * and we can decode it into an ascii string + */ + if (nvm_data != NVM_PBA_PTR_GUARD) { + DEBUGOUT("NVM PBA number is not stored as string\n"); + + /* make sure callers buffer is big enough to store the PBA */ + if (pba_num_size < E1000_PBANUM_LENGTH) { + DEBUGOUT("PBA string buffer too small\n"); + return E1000_ERR_NO_SPACE; + } + + /* extract hex string from data and pba_ptr */ + pba_num[0] = (nvm_data >> 12) & 0xF; + pba_num[1] = (nvm_data >> 8) & 0xF; + pba_num[2] = (nvm_data >> 4) & 0xF; + pba_num[3] = nvm_data & 0xF; + pba_num[4] = (pba_ptr >> 12) & 0xF; + pba_num[5] = (pba_ptr >> 8) & 0xF; + pba_num[6] = '-'; + pba_num[7] = 0; + pba_num[8] = (pba_ptr >> 4) & 0xF; + pba_num[9] = pba_ptr & 0xF; + + /* put a null character on the end of our string */ + pba_num[10] = '\0'; + + /* switch all the data but the '-' to hex char */ + for (offset = 0; offset < 10; offset++) { + if (pba_num[offset] < 0xA) + pba_num[offset] += '0'; + else if (pba_num[offset] < 0x10) + pba_num[offset] += 'A' - 0xA; + } + + return E1000_SUCCESS; + } + + ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (length == 0xFFFF || length == 0) { + DEBUGOUT("NVM PBA number section invalid length\n"); + return -E1000_ERR_NVM_PBA_SECTION; + } + /* check if pba_num buffer is big enough */ + if (pba_num_size < (((u32)length * 2) - 1)) { + DEBUGOUT("PBA string buffer too small\n"); + return -E1000_ERR_NO_SPACE; + } + + /* trim pba length from start of string */ + pba_ptr++; + length--; + + for (offset = 0; offset < length; offset++) { + ret_val = hw->nvm.ops.read(hw, pba_ptr + offset, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + pba_num[offset * 2] = (u8)(nvm_data >> 8); + pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF); + } + pba_num[offset * 2] = '\0'; + + return E1000_SUCCESS; +} + +/** + * e1000_read_pba_length_generic - Read device part number length + * @hw: pointer to the HW structure + * @pba_num_size: size of part number buffer + * + * Reads the product board assembly (PBA) number length from the EEPROM and + * stores the value in pba_num_size. + **/ +s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size) +{ + s32 ret_val; + u16 nvm_data; + u16 pba_ptr; + u16 length; + + DEBUGFUNC("e1000_read_pba_length_generic"); + + if (pba_num_size == NULL) { + DEBUGOUT("PBA buffer size was null\n"); + return -E1000_ERR_INVALID_ARGUMENT; + } + + ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + /* if data is not ptr guard the PBA must be in legacy format */ + if (nvm_data != NVM_PBA_PTR_GUARD) { + *pba_num_size = E1000_PBANUM_LENGTH; + return E1000_SUCCESS; + } + + ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (length == 0xFFFF || length == 0) { + DEBUGOUT("NVM PBA number section invalid length\n"); + return -E1000_ERR_NVM_PBA_SECTION; + } + + /* Convert from length in u16 values to u8 chars, add 1 for NULL, + * and subtract 2 because length field is included in length. + */ + *pba_num_size = ((u32)length * 2) - 1; + + return E1000_SUCCESS; +} + + + + + +/** + * e1000_read_mac_addr_generic - Read device MAC address + * @hw: pointer to the HW structure + * + * Reads the device MAC address from the EEPROM and stores the value. + * Since devices with two ports use the same EEPROM, we increment the + * last bit in the MAC address for the second port. + **/ +s32 e1000_read_mac_addr_generic(struct e1000_hw *hw) +{ + u32 rar_high; + u32 rar_low; + u16 i; + + rar_high = E1000_READ_REG(hw, E1000_RAH(0)); + rar_low = E1000_READ_REG(hw, E1000_RAL(0)); + + for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++) + hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8)); + + for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++) + hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8)); + + for (i = 0; i < ETH_ADDR_LEN; i++) + hw->mac.addr[i] = hw->mac.perm_addr[i]; + + return E1000_SUCCESS; +} + +/** + * e1000_validate_nvm_checksum_generic - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + **/ +s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw) +{ + s32 ret_val; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_validate_nvm_checksum_generic"); + + for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + checksum += nvm_data; + } + + if (checksum != (u16) NVM_SUM) { + DEBUGOUT("NVM Checksum Invalid\n"); + return -E1000_ERR_NVM; + } + + return E1000_SUCCESS; +} + +/** + * e1000_update_nvm_checksum_generic - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. + **/ +s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw) +{ + s32 ret_val; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_update_nvm_checksum"); + + for (i = 0; i < NVM_CHECKSUM_REG; i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error while updating checksum.\n"); + return ret_val; + } + checksum += nvm_data; + } + checksum = (u16) NVM_SUM - checksum; + ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum); + if (ret_val) + DEBUGOUT("NVM Write Error while updating checksum.\n"); + + return ret_val; +} + +/** + * e1000_reload_nvm_generic - Reloads EEPROM + * @hw: pointer to the HW structure + * + * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the + * extended control register. + **/ +static void e1000_reload_nvm_generic(struct e1000_hw *hw) +{ + u32 ctrl_ext; + + DEBUGFUNC("e1000_reload_nvm_generic"); + + usec_delay(10); + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_get_fw_version - Get firmware version information + * @hw: pointer to the HW structure + * @fw_vers: pointer to output version structure + * + * unsupported/not present features return 0 in version structure + **/ +void e1000_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers) +{ + u16 eeprom_verh, eeprom_verl, etrack_test, fw_version; + u8 q, hval, rem, result; + u16 comb_verh, comb_verl, comb_offset; + + memset(fw_vers, 0, sizeof(struct e1000_fw_version)); + + /* basic eeprom version numbers, bits used vary by part and by tool + * used to create the nvm images */ + /* Check which data format we have */ + hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test); + switch (hw->mac.type) { + case e1000_i211: + e1000_read_invm_version(hw, fw_vers); + return; + case e1000_82575: + case e1000_82576: + case e1000_82580: + /* Use this format, unless EETRACK ID exists, + * then use alternate format + */ + if ((etrack_test & NVM_MAJOR_MASK) != NVM_ETRACK_VALID) { + hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); + fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) + >> NVM_MAJOR_SHIFT; + fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK) + >> NVM_MINOR_SHIFT; + fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK); + goto etrack_id; + } + break; + case e1000_i210: + if (!(e1000_get_flash_presence_i210(hw))) { + e1000_read_invm_version(hw, fw_vers); + return; + } + /* fall through */ + case e1000_i350: + case e1000_i354: + /* find combo image version */ + hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset); + if ((comb_offset != 0x0) && + (comb_offset != NVM_VER_INVALID)) { + + hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset + + 1), 1, &comb_verh); + hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset), + 1, &comb_verl); + + /* get Option Rom version if it exists and is valid */ + if ((comb_verh && comb_verl) && + ((comb_verh != NVM_VER_INVALID) && + (comb_verl != NVM_VER_INVALID))) { + + fw_vers->or_valid = true; + fw_vers->or_major = + comb_verl >> NVM_COMB_VER_SHFT; + fw_vers->or_build = + (comb_verl << NVM_COMB_VER_SHFT) + | (comb_verh >> NVM_COMB_VER_SHFT); + fw_vers->or_patch = + comb_verh & NVM_COMB_VER_MASK; + } + } + break; + default: + return; + } + hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); + fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) + >> NVM_MAJOR_SHIFT; + + /* check for old style version format in newer images*/ + if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) { + eeprom_verl = (fw_version & NVM_COMB_VER_MASK); + } else { + eeprom_verl = (fw_version & NVM_MINOR_MASK) + >> NVM_MINOR_SHIFT; + } + /* Convert minor value to hex before assigning to output struct + * Val to be converted will not be higher than 99, per tool output + */ + q = eeprom_verl / NVM_HEX_CONV; + hval = q * NVM_HEX_TENS; + rem = eeprom_verl % NVM_HEX_CONV; + result = hval + rem; + fw_vers->eep_minor = result; + +etrack_id: + if ((etrack_test & NVM_MAJOR_MASK) == NVM_ETRACK_VALID) { + hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl); + hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh); + fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) + | eeprom_verl; + } + return; +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_nvm.h b/kernel/linux/kni/ethtool/igb/e1000_nvm.h new file mode 100644 index 00000000..e27b1c0a --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_nvm.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_NVM_H_ +#define _E1000_NVM_H_ + + +struct e1000_fw_version { + u32 etrack_id; + u16 eep_major; + u16 eep_minor; + u16 eep_build; + + u8 invm_major; + u8 invm_minor; + u8 invm_img_type; + + bool or_valid; + u16 or_major; + u16 or_build; + u16 or_patch; +}; + + +void e1000_init_nvm_ops_generic(struct e1000_hw *hw); +s32 e1000_null_read_nvm(struct e1000_hw *hw, u16 a, u16 b, u16 *c); +void e1000_null_nvm_generic(struct e1000_hw *hw); +s32 e1000_null_led_default(struct e1000_hw *hw, u16 *data); +s32 e1000_null_write_nvm(struct e1000_hw *hw, u16 a, u16 b, u16 *c); +s32 e1000_acquire_nvm_generic(struct e1000_hw *hw); + +s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg); +s32 e1000_read_mac_addr_generic(struct e1000_hw *hw); +s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, + u32 pba_num_size); +s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size); +s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data); +s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw); +s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw); +void e1000_release_nvm_generic(struct e1000_hw *hw); +void e1000_get_fw_version(struct e1000_hw *hw, + struct e1000_fw_version *fw_vers); + +#define E1000_STM_OPCODE 0xDB00 + +#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_osdep.h b/kernel/linux/kni/ethtool/igb/e1000_osdep.h new file mode 100644 index 00000000..3228100e --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_osdep.h @@ -0,0 +1,121 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + + +/* glue for the OS independent part of e1000 + * includes register access macros + */ + +#ifndef _E1000_OSDEP_H_ +#define _E1000_OSDEP_H_ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/if_ether.h> +#include <linux/sched.h> +#include "kcompat.h" + +#ifndef __INTEL_COMPILER +#pragma GCC diagnostic ignored "-Wunused-function" +#endif + +#define usec_delay(x) udelay(x) +#define usec_delay_irq(x) udelay(x) +#ifndef msec_delay +#define msec_delay(x) do { \ + /* Don't mdelay in interrupt context! */ \ + if (in_interrupt()) \ + BUG(); \ + else \ + msleep(x); \ +} while (0) + +/* Some workarounds require millisecond delays and are run during interrupt + * context. Most notably, when establishing link, the phy may need tweaking + * but cannot process phy register reads/writes faster than millisecond + * intervals...and we establish link due to a "link status change" interrupt. + */ +#define msec_delay_irq(x) mdelay(x) +#endif + +#define PCI_COMMAND_REGISTER PCI_COMMAND +#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE +#define ETH_ADDR_LEN ETH_ALEN + +#ifdef __BIG_ENDIAN +#define E1000_BIG_ENDIAN __BIG_ENDIAN +#endif + + +#ifdef DEBUG +#define DEBUGOUT(S) printk(KERN_DEBUG S) +#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S, ## A) +#else +#define DEBUGOUT(S) +#define DEBUGOUT1(S, A...) +#endif + +#ifdef DEBUG_FUNC +#define DEBUGFUNC(F) DEBUGOUT(F "\n") +#else +#define DEBUGFUNC(F) +#endif +#define DEBUGOUT2 DEBUGOUT1 +#define DEBUGOUT3 DEBUGOUT2 +#define DEBUGOUT7 DEBUGOUT3 + +#define E1000_REGISTER(a, reg) reg + +#define E1000_WRITE_REG(a, reg, value) ( \ + writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg)))) + +#define E1000_READ_REG(a, reg) (readl((a)->hw_addr + E1000_REGISTER(a, reg))) + +#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \ + writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2)))) + +#define E1000_READ_REG_ARRAY(a, reg, offset) ( \ + readl((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2))) + +#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY +#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY + +#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \ + writew((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1)))) + +#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \ + readw((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1))) + +#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \ + writeb((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + (offset)))) + +#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \ + readb((a)->hw_addr + E1000_REGISTER(a, reg) + (offset))) + +#define E1000_WRITE_REG_IO(a, reg, offset) do { \ + outl(reg, ((a)->io_base)); \ + outl(offset, ((a)->io_base + 4)); } while (0) + +#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, E1000_STATUS) + +#define E1000_WRITE_FLASH_REG(a, reg, value) ( \ + writel((value), ((a)->flash_address + reg))) + +#define E1000_WRITE_FLASH_REG16(a, reg, value) ( \ + writew((value), ((a)->flash_address + reg))) + +#define E1000_READ_FLASH_REG(a, reg) (readl((a)->flash_address + reg)) + +#define E1000_READ_FLASH_REG16(a, reg) (readw((a)->flash_address + reg)) + +#endif /* _E1000_OSDEP_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_phy.c b/kernel/linux/kni/ethtool/igb/e1000_phy.c new file mode 100644 index 00000000..1934a309 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_phy.c @@ -0,0 +1,3392 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_api.h" + +static s32 e1000_wait_autoneg(struct e1000_hw *hw); +/* Cable length tables */ +static const u16 e1000_m88_cable_length_table[] = { + 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; +#define M88E1000_CABLE_LENGTH_TABLE_SIZE \ + (sizeof(e1000_m88_cable_length_table) / \ + sizeof(e1000_m88_cable_length_table[0])) + +static const u16 e1000_igp_2_cable_length_table[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3, + 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22, + 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40, + 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61, + 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82, + 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95, + 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, + 124}; +#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ + (sizeof(e1000_igp_2_cable_length_table) / \ + sizeof(e1000_igp_2_cable_length_table[0])) + +/** + * e1000_init_phy_ops_generic - Initialize PHY function pointers + * @hw: pointer to the HW structure + * + * Setups up the function pointers to no-op functions + **/ +void e1000_init_phy_ops_generic(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + DEBUGFUNC("e1000_init_phy_ops_generic"); + + /* Initialize function pointers */ + phy->ops.init_params = e1000_null_ops_generic; + phy->ops.acquire = e1000_null_ops_generic; + phy->ops.check_polarity = e1000_null_ops_generic; + phy->ops.check_reset_block = e1000_null_ops_generic; + phy->ops.commit = e1000_null_ops_generic; + phy->ops.force_speed_duplex = e1000_null_ops_generic; + phy->ops.get_cfg_done = e1000_null_ops_generic; + phy->ops.get_cable_length = e1000_null_ops_generic; + phy->ops.get_info = e1000_null_ops_generic; + phy->ops.set_page = e1000_null_set_page; + phy->ops.read_reg = e1000_null_read_reg; + phy->ops.read_reg_locked = e1000_null_read_reg; + phy->ops.read_reg_page = e1000_null_read_reg; + phy->ops.release = e1000_null_phy_generic; + phy->ops.reset = e1000_null_ops_generic; + phy->ops.set_d0_lplu_state = e1000_null_lplu_state; + phy->ops.set_d3_lplu_state = e1000_null_lplu_state; + phy->ops.write_reg = e1000_null_write_reg; + phy->ops.write_reg_locked = e1000_null_write_reg; + phy->ops.write_reg_page = e1000_null_write_reg; + phy->ops.power_up = e1000_null_phy_generic; + phy->ops.power_down = e1000_null_phy_generic; + phy->ops.read_i2c_byte = e1000_read_i2c_byte_null; + phy->ops.write_i2c_byte = e1000_write_i2c_byte_null; +} + +/** + * e1000_null_set_page - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_set_page(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG data) +{ + DEBUGFUNC("e1000_null_set_page"); + return E1000_SUCCESS; +} + +/** + * e1000_null_read_reg - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_read_reg(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG *data) +{ + DEBUGFUNC("e1000_null_read_reg"); + return E1000_SUCCESS; +} + +/** + * e1000_null_phy_generic - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_phy_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_phy_generic"); + return; +} + +/** + * e1000_null_lplu_state - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_lplu_state(struct e1000_hw E1000_UNUSEDARG *hw, + bool E1000_UNUSEDARG active) +{ + DEBUGFUNC("e1000_null_lplu_state"); + return E1000_SUCCESS; +} + +/** + * e1000_null_write_reg - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_write_reg(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG data) +{ + DEBUGFUNC("e1000_null_write_reg"); + return E1000_SUCCESS; +} + +/** + * e1000_read_i2c_byte_null - No-op function, return 0 + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: data value read + * + **/ +s32 e1000_read_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG byte_offset, + u8 E1000_UNUSEDARG dev_addr, + u8 E1000_UNUSEDARG *data) +{ + DEBUGFUNC("e1000_read_i2c_byte_null"); + return E1000_SUCCESS; +} + +/** + * e1000_write_i2c_byte_null - No-op function, return 0 + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: data value to write + * + **/ +s32 e1000_write_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG byte_offset, + u8 E1000_UNUSEDARG dev_addr, + u8 E1000_UNUSEDARG data) +{ + DEBUGFUNC("e1000_write_i2c_byte_null"); + return E1000_SUCCESS; +} + +/** + * e1000_check_reset_block_generic - Check if PHY reset is blocked + * @hw: pointer to the HW structure + * + * Read the PHY management control register and check whether a PHY reset + * is blocked. If a reset is not blocked return E1000_SUCCESS, otherwise + * return E1000_BLK_PHY_RESET (12). + **/ +s32 e1000_check_reset_block_generic(struct e1000_hw *hw) +{ + u32 manc; + + DEBUGFUNC("e1000_check_reset_block"); + + manc = E1000_READ_REG(hw, E1000_MANC); + + return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? + E1000_BLK_PHY_RESET : E1000_SUCCESS; +} + +/** + * e1000_get_phy_id - Retrieve the PHY ID and revision + * @hw: pointer to the HW structure + * + * Reads the PHY registers and stores the PHY ID and possibly the PHY + * revision in the hardware structure. + **/ +s32 e1000_get_phy_id(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 phy_id; + + DEBUGFUNC("e1000_get_phy_id"); + + if (!phy->ops.read_reg) + return E1000_SUCCESS; + + ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id); + if (ret_val) + return ret_val; + + phy->id = (u32)(phy_id << 16); + usec_delay(20); + ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id); + if (ret_val) + return ret_val; + + phy->id |= (u32)(phy_id & PHY_REVISION_MASK); + phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); + + + return E1000_SUCCESS; +} + +/** + * e1000_phy_reset_dsp_generic - Reset PHY DSP + * @hw: pointer to the HW structure + * + * Reset the digital signal processor. + **/ +s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_phy_reset_dsp_generic"); + + if (!hw->phy.ops.write_reg) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1); + if (ret_val) + return ret_val; + + return hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0); +} + +/** + * e1000_read_phy_reg_mdic - Read MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the MDI control register in the PHY at offset and stores the + * information read to data. + **/ +s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, mdic = 0; + + DEBUGFUNC("e1000_read_phy_reg_mdic"); + + if (offset > MAX_PHY_REG_ADDRESS) { + DEBUGOUT1("PHY Address %d is out of range\n", offset); + return -E1000_ERR_PARAM; + } + + /* Set up Op-code, Phy Address, and register offset in the MDI + * Control register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + mdic = ((offset << E1000_MDIC_REG_SHIFT) | + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_READ)); + + E1000_WRITE_REG(hw, E1000_MDIC, mdic); + + /* Poll the ready bit to see if the MDI read completed + * Increasing the time out as testing showed failures with + * the lower time out + */ + for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { + usec_delay_irq(50); + mdic = E1000_READ_REG(hw, E1000_MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + DEBUGOUT("MDI Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (mdic & E1000_MDIC_ERROR) { + DEBUGOUT("MDI Error\n"); + return -E1000_ERR_PHY; + } + if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { + DEBUGOUT2("MDI Read offset error - requested %d, returned %d\n", + offset, + (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT); + return -E1000_ERR_PHY; + } + *data = (u16) mdic; + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_mdic - Write MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write to register at offset + * + * Writes data to MDI control register in the PHY at offset. + **/ +s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, mdic = 0; + + DEBUGFUNC("e1000_write_phy_reg_mdic"); + + if (offset > MAX_PHY_REG_ADDRESS) { + DEBUGOUT1("PHY Address %d is out of range\n", offset); + return -E1000_ERR_PARAM; + } + + /* Set up Op-code, Phy Address, and register offset in the MDI + * Control register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + mdic = (((u32)data) | + (offset << E1000_MDIC_REG_SHIFT) | + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_WRITE)); + + E1000_WRITE_REG(hw, E1000_MDIC, mdic); + + /* Poll the ready bit to see if the MDI read completed + * Increasing the time out as testing showed failures with + * the lower time out + */ + for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { + usec_delay_irq(50); + mdic = E1000_READ_REG(hw, E1000_MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + DEBUGOUT("MDI Write did not complete\n"); + return -E1000_ERR_PHY; + } + if (mdic & E1000_MDIC_ERROR) { + DEBUGOUT("MDI Error\n"); + return -E1000_ERR_PHY; + } + if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { + DEBUGOUT2("MDI Write offset error - requested %d, returned %d\n", + offset, + (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT); + return -E1000_ERR_PHY; + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_phy_reg_i2c - Read PHY register using i2c + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the i2c interface and stores the + * retrieved information in data. + **/ +s32 e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, i2ccmd = 0; + + DEBUGFUNC("e1000_read_phy_reg_i2c"); + + /* Set up Op-code, Phy Address, and register address in the I2CCMD + * register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + (E1000_I2CCMD_OPCODE_READ)); + + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) + break; + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + + /* Need to byte-swap the 16-bit value. */ + *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00); + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_i2c - Write PHY register using i2c + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset using the i2c interface. + **/ +s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, i2ccmd = 0; + u16 phy_data_swapped; + + DEBUGFUNC("e1000_write_phy_reg_i2c"); + + /* Prevent overwritting SFP I2C EEPROM which is at A0 address.*/ + if ((hw->phy.addr == 0) || (hw->phy.addr > 7)) { + DEBUGOUT1("PHY I2C Address %d is out of range.\n", + hw->phy.addr); + return -E1000_ERR_CONFIG; + } + + /* Swap the data bytes for the I2C interface */ + phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00); + + /* Set up Op-code, Phy Address, and register address in the I2CCMD + * register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_WRITE | + phy_data_swapped); + + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) + break; + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Write did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_sfp_data_byte - Reads SFP module data. + * @hw: pointer to the HW structure + * @offset: byte location offset to be read + * @data: read data buffer pointer + * + * Reads one byte from SFP module data stored + * in SFP resided EEPROM memory or SFP diagnostic area. + * Function should be called with + * E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access + * E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters + * access + **/ +s32 e1000_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data) +{ + u32 i = 0; + u32 i2ccmd = 0; + u32 data_local = 0; + + DEBUGFUNC("e1000_read_sfp_data_byte"); + + if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) { + DEBUGOUT("I2CCMD command address exceeds upper limit\n"); + return -E1000_ERR_PHY; + } + + /* Set up Op-code, EEPROM Address,in the I2CCMD + * register. The MAC will take care of interfacing with the + * EEPROM to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_READ); + + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + data_local = E1000_READ_REG(hw, E1000_I2CCMD); + if (data_local & E1000_I2CCMD_READY) + break; + } + if (!(data_local & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (data_local & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + *data = (u8) data_local & 0xFF; + + return E1000_SUCCESS; +} + +/** + * e1000_write_sfp_data_byte - Writes SFP module data. + * @hw: pointer to the HW structure + * @offset: byte location offset to write to + * @data: data to write + * + * Writes one byte to SFP module data stored + * in SFP resided EEPROM memory or SFP diagnostic area. + * Function should be called with + * E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access + * E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters + * access + **/ +s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data) +{ + u32 i = 0; + u32 i2ccmd = 0; + u32 data_local = 0; + + DEBUGFUNC("e1000_write_sfp_data_byte"); + + if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) { + DEBUGOUT("I2CCMD command address exceeds upper limit\n"); + return -E1000_ERR_PHY; + } + /* The programming interface is 16 bits wide + * so we need to read the whole word first + * then update appropriate byte lane and write + * the updated word back. + */ + /* Set up Op-code, EEPROM Address,in the I2CCMD + * register. The MAC will take care of interfacing + * with an EEPROM to write the data given. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_READ); + /* Set a command to read single word */ + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + /* Poll the ready bit to see if lastly + * launched I2C operation completed + */ + i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) { + /* Check if this is READ or WRITE phase */ + if ((i2ccmd & E1000_I2CCMD_OPCODE_READ) == + E1000_I2CCMD_OPCODE_READ) { + /* Write the selected byte + * lane and update whole word + */ + data_local = i2ccmd & 0xFF00; + data_local |= data; + i2ccmd = ((offset << + E1000_I2CCMD_REG_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_WRITE | data_local); + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + } else { + break; + } + } + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Write did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + return E1000_SUCCESS; +} + +/** + * e1000_read_phy_reg_m88 - Read m88 PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore, if necessary, then reads the PHY register at offset + * and storing the retrieved information in data. Release any acquired + * semaphores before exiting. + **/ +s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_read_phy_reg_m88"); + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, + data); + + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_write_phy_reg_m88 - Write m88 PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_write_phy_reg_m88"); + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, + data); + + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_set_page_igp - Set page as on IGP-like PHY(s) + * @hw: pointer to the HW structure + * @page: page to set (shifted left when necessary) + * + * Sets PHY page required for PHY register access. Assumes semaphore is + * already acquired. Note, this function sets phy.addr to 1 so the caller + * must set it appropriately (if necessary) after this function returns. + **/ +s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page) +{ + DEBUGFUNC("e1000_set_page_igp"); + + DEBUGOUT1("Setting page 0x%x\n", page); + + hw->phy.addr = 1; + + return e1000_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page); +} + +/** + * __e1000_read_phy_reg_igp - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary, then reads the PHY register at offset + * and stores the retrieved information in data. Release any acquired + * semaphores before exiting. + **/ +static s32 __e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("__e1000_read_phy_reg_igp"); + + if (!locked) { + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + if (offset > MAX_PHY_MULTI_PAGE_REG) + ret_val = e1000_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); + if (!ret_val) + ret_val = e1000_read_phy_reg_mdic(hw, + MAX_PHY_REG_ADDRESS & offset, + data); + if (!locked) + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_read_phy_reg_igp - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset and stores the + * retrieved information in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_igp(hw, offset, data, false); +} + +/** + * e1000_read_phy_reg_igp_locked - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired. + **/ +s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_igp(hw, offset, data, true); +} + +/** + * e1000_write_phy_reg_igp - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +static s32 __e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_write_phy_reg_igp"); + + if (!locked) { + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + if (offset > MAX_PHY_MULTI_PAGE_REG) + ret_val = e1000_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); + if (!ret_val) + ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & + offset, + data); + if (!locked) + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_write_phy_reg_igp - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_igp(hw, offset, data, false); +} + +/** + * e1000_write_phy_reg_igp_locked - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. + * Assumes semaphore already acquired. + **/ +s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_igp(hw, offset, data, true); +} + +/** + * __e1000_read_kmrn_reg - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary. Then reads the PHY register at offset + * using the kumeran interface. The information retrieved is stored in data. + * Release any acquired semaphores before exiting. + **/ +static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) +{ + u32 kmrnctrlsta; + + DEBUGFUNC("__e1000_read_kmrn_reg"); + + if (!locked) { + s32 ret_val = E1000_SUCCESS; + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & + E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; + E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta); + E1000_WRITE_FLUSH(hw); + + usec_delay(2); + + kmrnctrlsta = E1000_READ_REG(hw, E1000_KMRNCTRLSTA); + *data = (u16)kmrnctrlsta; + + if (!locked) + hw->phy.ops.release(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_read_kmrn_reg_generic - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset using the + * kumeran interface. The information retrieved is stored in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, false); +} + +/** + * e1000_read_kmrn_reg_locked - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the kumeran interface. The + * information retrieved is stored in data. + * Assumes semaphore already acquired. + **/ +s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, true); +} + +/** + * __e1000_write_kmrn_reg - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary. Then write the data to PHY register + * at the offset using the kumeran interface. Release any acquired semaphores + * before exiting. + **/ +static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) +{ + u32 kmrnctrlsta; + + DEBUGFUNC("e1000_write_kmrn_reg_generic"); + + if (!locked) { + s32 ret_val = E1000_SUCCESS; + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & + E1000_KMRNCTRLSTA_OFFSET) | data; + E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta); + E1000_WRITE_FLUSH(hw); + + usec_delay(2); + + if (!locked) + hw->phy.ops.release(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_write_kmrn_reg_generic - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to the PHY register at the offset + * using the kumeran interface. Release the acquired semaphore before exiting. + **/ +s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, false); +} + +/** + * e1000_write_kmrn_reg_locked - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Write the data to PHY register at the offset using the kumeran interface. + * Assumes semaphore already acquired. + **/ +s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, true); +} + +/** + * e1000_set_master_slave_mode - Setup PHY for Master/slave mode + * @hw: pointer to the HW structure + * + * Sets up Master/slave mode + **/ +static s32 e1000_set_master_slave_mode(struct e1000_hw *hw) +{ + s32 ret_val; + u16 phy_data; + + /* Resolve Master/Slave mode */ + ret_val = hw->phy.ops.read_reg(hw, PHY_1000T_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* load defaults for future use */ + hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ? + ((phy_data & CR_1000T_MS_VALUE) ? + e1000_ms_force_master : + e1000_ms_force_slave) : e1000_ms_auto; + + switch (hw->phy.ms_type) { + case e1000_ms_force_master: + phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + break; + case e1000_ms_force_slave: + phy_data |= CR_1000T_MS_ENABLE; + phy_data &= ~(CR_1000T_MS_VALUE); + break; + case e1000_ms_auto: + phy_data &= ~CR_1000T_MS_ENABLE; + /* fall-through */ + default: + break; + } + + return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data); +} + +/** + * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link + * @hw: pointer to the HW structure + * + * Sets up Carrier-sense on Transmit and downshift values. + **/ +s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) +{ + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_setup_82577"); + + if (hw->phy.reset_disable) + return E1000_SUCCESS; + + if (hw->phy.type == e1000_phy_82580) { + ret_val = hw->phy.ops.reset(hw); + if (ret_val) { + DEBUGOUT("Error resetting the PHY.\n"); + return ret_val; + } + } + + /* Enable CRS on Tx. This must be set for half-duplex operation. */ + ret_val = hw->phy.ops.read_reg(hw, I82577_CFG_REG, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= I82577_CFG_ASSERT_CRS_ON_TX; + + /* Enable downshift */ + phy_data |= I82577_CFG_ENABLE_DOWNSHIFT; + + ret_val = hw->phy.ops.write_reg(hw, I82577_CFG_REG, phy_data); + if (ret_val) + return ret_val; + + /* Set MDI/MDIX mode */ + ret_val = hw->phy.ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data); + if (ret_val) + return ret_val; + phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK; + /* Options: + * 0 - Auto (default) + * 1 - MDI mode + * 2 - MDI-X mode + */ + switch (hw->phy.mdix) { + case 1: + break; + case 2: + phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX; + break; + case 0: + default: + phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX; + break; + } + ret_val = hw->phy.ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data); + if (ret_val) + return ret_val; + + return e1000_set_master_slave_mode(hw); +} + +/** + * e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link + * @hw: pointer to the HW structure + * + * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock + * and downshift values are set also. + **/ +s32 e1000_copper_link_setup_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_setup_m88"); + + if (phy->reset_disable) + return E1000_SUCCESS; + + /* Enable CRS on Tx. This must be set for half-duplex operation. */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + + /* Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + + switch (phy->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled + */ + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if (phy->disable_polarity_correction) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + if (phy->revision < E1000_REVISION_4) { + /* Force TX_CLK in the Extended PHY Specific Control Register + * to 25MHz clock. + */ + ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_EPSCR_TX_CLK_25; + + if ((phy->revision == E1000_REVISION_2) && + (phy->id == M88E1111_I_PHY_ID)) { + /* 82573L PHY - set the downshift counter to 5x. */ + phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK; + phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X; + } else { + /* Configure Master and Slave downshift values */ + phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); + phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); + } + ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + } + + /* Commit the changes. */ + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + + return E1000_SUCCESS; +} + +/** + * e1000_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link + * @hw: pointer to the HW structure + * + * Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's. + * Also enables and sets the downshift parameters. + **/ +s32 e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_setup_m88_gen2"); + + if (phy->reset_disable) + return E1000_SUCCESS; + + /* Enable CRS on Tx. This must be set for half-duplex operation. */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + + switch (phy->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + /* M88E1112 does not support this mode) */ + if (phy->id != M88E1112_E_PHY_ID) { + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + } + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled + */ + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if (phy->disable_polarity_correction) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + + /* Enable downshift and setting it to X6 */ + if (phy->id == M88E1543_E_PHY_ID) { + phy_data &= ~I347AT4_PSCR_DOWNSHIFT_ENABLE; + ret_val = + phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + } + + phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK; + phy_data |= I347AT4_PSCR_DOWNSHIFT_6X; + phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE; + + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + /* Commit the changes. */ + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + + ret_val = e1000_set_master_slave_mode(hw); + if (ret_val) + return ret_val; + + return E1000_SUCCESS; +} + +/** + * e1000_copper_link_setup_igp - Setup igp PHY's for copper link + * @hw: pointer to the HW structure + * + * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for + * igp PHY's. + **/ +s32 e1000_copper_link_setup_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_copper_link_setup_igp"); + + if (phy->reset_disable) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.reset(hw); + if (ret_val) { + DEBUGOUT("Error resetting the PHY.\n"); + return ret_val; + } + + /* Wait 100ms for MAC to configure PHY from NVM settings, to avoid + * timeout issues when LFS is enabled. + */ + msec_delay(100); + + /* disable lplu d0 during driver init */ + if (hw->phy.ops.set_d0_lplu_state) { + ret_val = hw->phy.ops.set_d0_lplu_state(hw, false); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D0\n"); + return ret_val; + } + } + /* Configure mdi-mdix settings */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCR_AUTO_MDIX; + + switch (phy->mdix) { + case 1: + data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 2: + data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 0: + default: + data |= IGP01E1000_PSCR_AUTO_MDIX; + break; + } + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, data); + if (ret_val) + return ret_val; + + /* set auto-master slave resolution settings */ + if (hw->mac.autoneg) { + /* when autonegotiation advertisement is only 1000Mbps then we + * should disable SmartSpeed and enable Auto MasterSlave + * resolution as hardware default. + */ + if (phy->autoneg_advertised == ADVERTISE_1000_FULL) { + /* Disable SmartSpeed */ + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + + /* Set auto Master/Slave resolution process */ + ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data); + if (ret_val) + return ret_val; + + data &= ~CR_1000T_MS_ENABLE; + ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data); + if (ret_val) + return ret_val; + } + + ret_val = e1000_set_master_slave_mode(hw); + } + + return ret_val; +} + +/** + * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation + * @hw: pointer to the HW structure + * + * Reads the MII auto-neg advertisement register and/or the 1000T control + * register and if the PHY is already setup for auto-negotiation, then + * return successful. Otherwise, setup advertisement and flow control to + * the appropriate values for the wanted auto-negotiation. + **/ +static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg = 0; + + DEBUGFUNC("e1000_phy_setup_autoneg"); + + phy->autoneg_advertised &= phy->autoneg_mask; + + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + if (phy->autoneg_mask & ADVERTISE_1000_FULL) { + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, + &mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; + } + + /* Need to parse both autoneg_advertised and fc and set up + * the appropriate PHY registers. First we will parse for + * autoneg_advertised software override. Since we can advertise + * a plethora of combinations, we need to check each bit + * individually. + */ + + /* First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS | + NWAY_AR_100TX_HD_CAPS | + NWAY_AR_10T_FD_CAPS | + NWAY_AR_10T_HD_CAPS); + mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); + + DEBUGOUT1("autoneg_advertised %x\n", phy->autoneg_advertised); + + /* Do we want to advertise 10 Mb Half Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_10_HALF) { + DEBUGOUT("Advertise 10mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; + } + + /* Do we want to advertise 10 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_10_FULL) { + DEBUGOUT("Advertise 10mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; + } + + /* Do we want to advertise 100 Mb Half Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_100_HALF) { + DEBUGOUT("Advertise 100mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; + } + + /* Do we want to advertise 100 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_100_FULL) { + DEBUGOUT("Advertise 100mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; + } + + /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ + if (phy->autoneg_advertised & ADVERTISE_1000_HALF) + DEBUGOUT("Advertise 1000mb Half duplex request denied!\n"); + + /* Do we want to advertise 1000 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { + DEBUGOUT("Advertise 1000mb Full duplex\n"); + mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; + } + + /* Check for a software override of the flow control settings, and + * setup the PHY advertisement registers accordingly. If + * auto-negotiation is enabled, then software will have to set the + * "PAUSE" bits to the correct value in the Auto-Negotiation + * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto- + * negotiation. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * but we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: No software override. The flow control configuration + * in the EEPROM is used. + */ + switch (hw->fc.current_mode) { + case e1000_fc_none: + /* Flow control (Rx & Tx) is completely disabled by a + * software over-ride. + */ + mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case e1000_fc_rx_pause: + /* Rx Flow control is enabled, and Tx Flow control is + * disabled, by a software over-ride. + * + * Since there really isn't a way to advertise that we are + * capable of Rx Pause ONLY, we will advertise that we + * support both symmetric and asymmetric Rx PAUSE. Later + * (in e1000_config_fc_after_link_up) we will disable the + * hw's ability to send PAUSE frames. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case e1000_fc_tx_pause: + /* Tx Flow control is enabled, and Rx Flow control is + * disabled, by a software over-ride. + */ + mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; + mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; + break; + case e1000_fc_full: + /* Flow control (both Rx and Tx) is enabled by a software + * over-ride. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); + + if (phy->autoneg_mask & ADVERTISE_1000_FULL) + ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, + mii_1000t_ctrl_reg); + + return ret_val; +} + +/** + * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link + * @hw: pointer to the HW structure + * + * Performs initial bounds checking on autoneg advertisement parameter, then + * configure to advertise the full capability. Setup the PHY to autoneg + * and restart the negotiation process between the link partner. If + * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. + **/ +static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_ctrl; + + DEBUGFUNC("e1000_copper_link_autoneg"); + + /* Perform some bounds checking on the autoneg advertisement + * parameter. + */ + phy->autoneg_advertised &= phy->autoneg_mask; + + /* If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if (!phy->autoneg_advertised) + phy->autoneg_advertised = phy->autoneg_mask; + + DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); + ret_val = e1000_phy_setup_autoneg(hw); + if (ret_val) { + DEBUGOUT("Error Setting up Auto-Negotiation\n"); + return ret_val; + } + DEBUGOUT("Restarting Auto-Neg\n"); + + /* Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); + if (ret_val) + return ret_val; + + phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl); + if (ret_val) + return ret_val; + + /* Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if (phy->autoneg_wait_to_complete) { + ret_val = e1000_wait_autoneg(hw); + if (ret_val) { + DEBUGOUT("Error while waiting for autoneg to complete\n"); + return ret_val; + } + } + + hw->mac.get_link_status = true; + + return ret_val; +} + +/** + * e1000_setup_copper_link_generic - Configure copper link settings + * @hw: pointer to the HW structure + * + * Calls the appropriate function to configure the link for auto-neg or forced + * speed and duplex. Then we check for link, once link is established calls + * to configure collision distance and flow control are called. If link is + * not established, we return -E1000_ERR_PHY (-2). + **/ +s32 e1000_setup_copper_link_generic(struct e1000_hw *hw) +{ + s32 ret_val; + bool link; + + DEBUGFUNC("e1000_setup_copper_link_generic"); + + if (hw->mac.autoneg) { + /* Setup autoneg and flow control advertisement and perform + * autonegotiation. + */ + ret_val = e1000_copper_link_autoneg(hw); + if (ret_val) + return ret_val; + } else { + /* PHY will be set to 10H, 10F, 100H or 100F + * depending on user settings. + */ + DEBUGOUT("Forcing Speed and Duplex\n"); + ret_val = hw->phy.ops.force_speed_duplex(hw); + if (ret_val) { + DEBUGOUT("Error Forcing Speed and Duplex\n"); + return ret_val; + } + } + + /* Check link status. Wait up to 100 microseconds for link to become + * valid. + */ + ret_val = e1000_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10, + &link); + if (ret_val) + return ret_val; + + if (link) { + DEBUGOUT("Valid link established!!!\n"); + hw->mac.ops.config_collision_dist(hw); + ret_val = e1000_config_fc_after_link_up_generic(hw); + } else { + DEBUGOUT("Unable to establish link!!!\n"); + } + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY + * @hw: pointer to the HW structure + * + * Calls the PHY setup function to force speed and duplex. Clears the + * auto-crossover to force MDI manually. Waits for link and returns + * successful if link up is successful, else -E1000_ERR_PHY (-2). + **/ +s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_igp"); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &phy_data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); + if (ret_val) + return ret_val; + + /* Clear Auto-Crossover to force MDI manually. IGP requires MDI + * forced whenever speed and duplex are forced. + */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; + phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); + if (ret_val) + return ret_val; + + DEBUGOUT1("IGP PSCR: %X\n", phy_data); + + usec_delay(1); + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on IGP phy.\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) + DEBUGOUT("Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + } + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY + * @hw: pointer to the HW structure + * + * Calls the PHY setup function to force speed and duplex. Clears the + * auto-crossover to force MDI manually. Resets the PHY to commit the + * changes. If time expires while waiting for link up, we reset the DSP. + * After reset, TX_CLK and CRS on Tx must be set. Return successful upon + * successful completion, else return corresponding error code. + **/ +s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_m88"); + + /* I210 and I211 devices support Auto-Crossover in forced operation. */ + if (phy->type != e1000_phy_i210) { + /* Clear Auto-Crossover to force MDI manually. M88E1000 + * requires MDI forced whenever speed and duplex are forced. + */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + } + + DEBUGOUT1("M88E1000 PSCR: %X\n", phy_data); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &phy_data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); + if (ret_val) + return ret_val; + + /* Reset the phy to commit changes. */ + ret_val = hw->phy.ops.commit(hw); + if (ret_val) + return ret_val; + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on M88 phy.\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) { + bool reset_dsp = true; + + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1543_E_PHY_ID: + case I210_I_PHY_ID: + reset_dsp = false; + break; + default: + if (hw->phy.type != e1000_phy_m88) + reset_dsp = false; + break; + } + + if (!reset_dsp) { + DEBUGOUT("Link taking longer than expected.\n"); + } else { + /* We didn't get link. + * Reset the DSP and cross our fingers. + */ + ret_val = phy->ops.write_reg(hw, + M88E1000_PHY_PAGE_SELECT, + 0x001d); + if (ret_val) + return ret_val; + ret_val = e1000_phy_reset_dsp_generic(hw); + if (ret_val) + return ret_val; + } + } + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + } + + if (hw->phy.type != e1000_phy_m88) + return E1000_SUCCESS; + + if (hw->phy.id == I347AT4_E_PHY_ID || + hw->phy.id == M88E1340M_E_PHY_ID || + hw->phy.id == M88E1112_E_PHY_ID) + return E1000_SUCCESS; + if (hw->phy.id == I210_I_PHY_ID) + return E1000_SUCCESS; + if ((hw->phy.id == M88E1543_E_PHY_ID)) + return E1000_SUCCESS; + ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* Resetting the phy means we need to re-force TX_CLK in the + * Extended PHY Specific Control Register to 25MHz clock from + * the reset value of 2.5MHz. + */ + phy_data |= M88E1000_EPSCR_TX_CLK_25; + ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + /* In addition, we must re-enable CRS on Tx for both half and full + * duplex. + */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex + * @hw: pointer to the HW structure + * + * Forces the speed and duplex settings of the PHY. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_ife"); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, data); + if (ret_val) + return ret_val; + + /* Disable MDI-X support for 10/100 */ + ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data); + if (ret_val) + return ret_val; + + data &= ~IFE_PMC_AUTO_MDIX; + data &= ~IFE_PMC_FORCE_MDIX; + + ret_val = phy->ops.write_reg(hw, IFE_PHY_MDIX_CONTROL, data); + if (ret_val) + return ret_val; + + DEBUGOUT1("IFE PMC: %X\n", data); + + usec_delay(1); + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on IFE phy.\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) + DEBUGOUT("Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + } + + return E1000_SUCCESS; +} + +/** + * e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex + * @hw: pointer to the HW structure + * @phy_ctrl: pointer to current value of PHY_CONTROL + * + * Forces speed and duplex on the PHY by doing the following: disable flow + * control, force speed/duplex on the MAC, disable auto speed detection, + * disable auto-negotiation, configure duplex, configure speed, configure + * the collision distance, write configuration to CTRL register. The + * caller must write to the PHY_CONTROL register for these settings to + * take affect. + **/ +void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 ctrl; + + DEBUGFUNC("e1000_phy_force_speed_duplex_setup"); + + /* Turn off flow control when forcing speed/duplex */ + hw->fc.current_mode = e1000_fc_none; + + /* Force speed/duplex on the mac */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ctrl &= ~E1000_CTRL_SPD_SEL; + + /* Disable Auto Speed Detection */ + ctrl &= ~E1000_CTRL_ASDE; + + /* Disable autoneg on the phy */ + *phy_ctrl &= ~MII_CR_AUTO_NEG_EN; + + /* Forcing Full or Half Duplex? */ + if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { + ctrl &= ~E1000_CTRL_FD; + *phy_ctrl &= ~MII_CR_FULL_DUPLEX; + DEBUGOUT("Half Duplex\n"); + } else { + ctrl |= E1000_CTRL_FD; + *phy_ctrl |= MII_CR_FULL_DUPLEX; + DEBUGOUT("Full Duplex\n"); + } + + /* Forcing 10mb or 100mb? */ + if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) { + ctrl |= E1000_CTRL_SPD_100; + *phy_ctrl |= MII_CR_SPEED_100; + *phy_ctrl &= ~MII_CR_SPEED_1000; + DEBUGOUT("Forcing 100mb\n"); + } else { + ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); + *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); + DEBUGOUT("Forcing 10mb\n"); + } + + hw->mac.ops.config_collision_dist(hw); + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); +} + +/** + * e1000_set_d3_lplu_state_generic - Sets low power link up state for D3 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D3 + * and SmartSpeed is disabled when active is true, else clear lplu for D3 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. + **/ +s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_set_d3_lplu_state_generic"); + + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; + + ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); + if (ret_val) + return ret_val; + + if (!active) { + data &= ~IGP02E1000_PM_D3_LPLU; + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); + if (ret_val) + return ret_val; + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) { + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + } else if (phy->smart_speed == e1000_smart_speed_off) { + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + } + } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || + (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || + (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { + data |= IGP02E1000_PM_D3_LPLU; + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); + if (ret_val) + return ret_val; + + /* When LPLU is enabled, we should disable SmartSpeed */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + data); + } + + return ret_val; +} + +/** + * e1000_check_downshift_generic - Checks whether a downshift in speed occurred + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns 1 + * + * A downshift is detected by querying the PHY link health. + **/ +s32 e1000_check_downshift_generic(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, offset, mask; + + DEBUGFUNC("e1000_check_downshift_generic"); + + switch (phy->type) { + case e1000_phy_i210: + case e1000_phy_m88: + case e1000_phy_gg82563: + offset = M88E1000_PHY_SPEC_STATUS; + mask = M88E1000_PSSR_DOWNSHIFT; + break; + case e1000_phy_igp_2: + case e1000_phy_igp_3: + offset = IGP01E1000_PHY_LINK_HEALTH; + mask = IGP01E1000_PLHR_SS_DOWNGRADE; + break; + default: + /* speed downshift not supported */ + phy->speed_downgraded = false; + return E1000_SUCCESS; + } + + ret_val = phy->ops.read_reg(hw, offset, &phy_data); + + if (!ret_val) + phy->speed_downgraded = !!(phy_data & mask); + + return ret_val; +} + +/** + * e1000_check_polarity_m88 - Checks the polarity. + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + * + * Polarity is determined based on the PHY specific status register. + **/ +s32 e1000_check_polarity_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_check_polarity_m88"); + + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &data); + + if (!ret_val) + phy->cable_polarity = ((data & M88E1000_PSSR_REV_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_check_polarity_igp - Checks the polarity. + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + * + * Polarity is determined based on the PHY port status register, and the + * current speed (since there is no polarity at 100Mbps). + **/ +s32 e1000_check_polarity_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data, offset, mask; + + DEBUGFUNC("e1000_check_polarity_igp"); + + /* Polarity is determined based on the speed of + * our connection. + */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data); + if (ret_val) + return ret_val; + + if ((data & IGP01E1000_PSSR_SPEED_MASK) == + IGP01E1000_PSSR_SPEED_1000MBPS) { + offset = IGP01E1000_PHY_PCS_INIT_REG; + mask = IGP01E1000_PHY_POLARITY_MASK; + } else { + /* This really only applies to 10Mbps since + * there is no polarity for 100Mbps (always 0). + */ + offset = IGP01E1000_PHY_PORT_STATUS; + mask = IGP01E1000_PSSR_POLARITY_REVERSED; + } + + ret_val = phy->ops.read_reg(hw, offset, &data); + + if (!ret_val) + phy->cable_polarity = ((data & mask) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_check_polarity_ife - Check cable polarity for IFE PHY + * @hw: pointer to the HW structure + * + * Polarity is determined on the polarity reversal feature being enabled. + **/ +s32 e1000_check_polarity_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, offset, mask; + + DEBUGFUNC("e1000_check_polarity_ife"); + + /* Polarity is determined based on the reversal feature being enabled. + */ + if (phy->polarity_correction) { + offset = IFE_PHY_EXTENDED_STATUS_CONTROL; + mask = IFE_PESC_POLARITY_REVERSED; + } else { + offset = IFE_PHY_SPECIAL_CONTROL; + mask = IFE_PSC_FORCE_POLARITY; + } + + ret_val = phy->ops.read_reg(hw, offset, &phy_data); + + if (!ret_val) + phy->cable_polarity = ((phy_data & mask) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_wait_autoneg - Wait for auto-neg completion + * @hw: pointer to the HW structure + * + * Waits for auto-negotiation to complete or for the auto-negotiation time + * limit to expire, which ever happens first. + **/ +static s32 e1000_wait_autoneg(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 i, phy_status; + + DEBUGFUNC("e1000_wait_autoneg"); + + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; + + /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ + for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + if (phy_status & MII_SR_AUTONEG_COMPLETE) + break; + msec_delay(100); + } + + /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation + * has completed. + */ + return ret_val; +} + +/** + * e1000_phy_has_link_generic - Polls PHY for link + * @hw: pointer to the HW structure + * @iterations: number of times to poll for link + * @usec_interval: delay between polling attempts + * @success: pointer to whether polling was successful or not + * + * Polls the PHY status register for link, 'iterations' number of times. + **/ +s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, + u32 usec_interval, bool *success) +{ + s32 ret_val = E1000_SUCCESS; + u16 i, phy_status; + + DEBUGFUNC("e1000_phy_has_link_generic"); + + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; + + for (i = 0; i < iterations; i++) { + /* Some PHYs require the PHY_STATUS register to be read + * twice due to the link bit being sticky. No harm doing + * it across the board. + */ + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + /* If the first read fails, another entity may have + * ownership of the resources, wait and try again to + * see if they have relinquished the resources yet. + */ + usec_delay(usec_interval); + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + if (phy_status & MII_SR_LINK_STATUS) + break; + if (usec_interval >= 1000) + msec_delay_irq(usec_interval/1000); + else + usec_delay(usec_interval); + } + + *success = (i < iterations); + + return ret_val; +} + +/** + * e1000_get_cable_length_m88 - Determine cable length for m88 PHY + * @hw: pointer to the HW structure + * + * Reads the PHY specific status register to retrieve the cable length + * information. The cable length is determined by averaging the minimum and + * maximum values to get the "average" cable length. The m88 PHY has four + * possible cable length values, which are: + * Register Value Cable Length + * 0 < 50 meters + * 1 50 - 80 meters + * 2 80 - 110 meters + * 3 110 - 140 meters + * 4 > 140 meters + **/ +s32 e1000_get_cable_length_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, index; + + DEBUGFUNC("e1000_get_cable_length_m88"); + + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if (ret_val) + return ret_val; + + index = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT); + + if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) + return -E1000_ERR_PHY; + + phy->min_cable_length = e1000_m88_cable_length_table[index]; + phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; + + phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; + + return E1000_SUCCESS; +} + +s32 e1000_get_cable_length_m88_gen2(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, phy_data2, is_cm; + u16 index, default_page; + + DEBUGFUNC("e1000_get_cable_length_m88_gen2"); + + switch (hw->phy.id) { + case I210_I_PHY_ID: + /* Get cable length from PHY Cable Diagnostics Control Reg */ + ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + + (I347AT4_PCDL + phy->addr), + &phy_data); + if (ret_val) + return ret_val; + + /* Check if the unit of cable length is meters or cm */ + ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + + I347AT4_PCDC, &phy_data2); + if (ret_val) + return ret_val; + + is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); + + /* Populate the phy structure with cable length in meters */ + phy->min_cable_length = phy_data / (is_cm ? 100 : 1); + phy->max_cable_length = phy_data / (is_cm ? 100 : 1); + phy->cable_length = phy_data / (is_cm ? 100 : 1); + break; + case M88E1543_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case I347AT4_E_PHY_ID: + /* Remember the original page select and set it to 7 */ + ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, + &default_page); + if (ret_val) + return ret_val; + + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07); + if (ret_val) + return ret_val; + + /* Get cable length from PHY Cable Diagnostics Control Reg */ + ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr), + &phy_data); + if (ret_val) + return ret_val; + + /* Check if the unit of cable length is meters or cm */ + ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2); + if (ret_val) + return ret_val; + + is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); + + /* Populate the phy structure with cable length in meters */ + phy->min_cable_length = phy_data / (is_cm ? 100 : 1); + phy->max_cable_length = phy_data / (is_cm ? 100 : 1); + phy->cable_length = phy_data / (is_cm ? 100 : 1); + + /* Reset the page select to its original value */ + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, + default_page); + if (ret_val) + return ret_val; + break; + + case M88E1112_E_PHY_ID: + /* Remember the original page select and set it to 5 */ + ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, + &default_page); + if (ret_val) + return ret_val; + + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE, + &phy_data); + if (ret_val) + return ret_val; + + index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT; + + if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) + return -E1000_ERR_PHY; + + phy->min_cable_length = e1000_m88_cable_length_table[index]; + phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; + + phy->cable_length = (phy->min_cable_length + + phy->max_cable_length) / 2; + + /* Reset the page select to its original value */ + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, + default_page); + if (ret_val) + return ret_val; + + break; + default: + return -E1000_ERR_PHY; + } + + return ret_val; +} + +/** + * e1000_get_cable_length_igp_2 - Determine cable length for igp2 PHY + * @hw: pointer to the HW structure + * + * The automatic gain control (agc) normalizes the amplitude of the + * received signal, adjusting for the attenuation produced by the + * cable. By reading the AGC registers, which represent the + * combination of coarse and fine gain value, the value can be put + * into a lookup table to obtain the approximate cable length + * for each channel. + **/ +s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, i, agc_value = 0; + u16 cur_agc_index, max_agc_index = 0; + u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; + static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { + IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D + }; + + DEBUGFUNC("e1000_get_cable_length_igp_2"); + + /* Read the AGC registers for all channels */ + for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { + ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data); + if (ret_val) + return ret_val; + + /* Getting bits 15:9, which represent the combination of + * coarse and fine gain values. The result is a number + * that can be put into the lookup table to obtain the + * approximate cable length. + */ + cur_agc_index = ((phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & + IGP02E1000_AGC_LENGTH_MASK); + + /* Array index bound check. */ + if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) || + (cur_agc_index == 0)) + return -E1000_ERR_PHY; + + /* Remove min & max AGC values from calculation. */ + if (e1000_igp_2_cable_length_table[min_agc_index] > + e1000_igp_2_cable_length_table[cur_agc_index]) + min_agc_index = cur_agc_index; + if (e1000_igp_2_cable_length_table[max_agc_index] < + e1000_igp_2_cable_length_table[cur_agc_index]) + max_agc_index = cur_agc_index; + + agc_value += e1000_igp_2_cable_length_table[cur_agc_index]; + } + + agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] + + e1000_igp_2_cable_length_table[max_agc_index]); + agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); + + /* Calculate cable length with the error range of +/- 10 meters. */ + phy->min_cable_length = (((agc_value - IGP02E1000_AGC_RANGE) > 0) ? + (agc_value - IGP02E1000_AGC_RANGE) : 0); + phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE; + + phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; + + return E1000_SUCCESS; +} + +/** + * e1000_get_phy_info_m88 - Retrieve PHY information + * @hw: pointer to the HW structure + * + * Valid for only copper links. Read the PHY status register (sticky read) + * to verify that link is up. Read the PHY special control register to + * determine the polarity and 10base-T extended distance. Read the PHY + * special status register to determine MDI/MDIx and current speed. If + * speed is 1000, then determine cable length, local and remote receiver. + **/ +s32 e1000_get_phy_info_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_m88"); + + if (phy->media_type != e1000_media_type_copper) { + DEBUGOUT("Phy info is only valid for copper media\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy->polarity_correction = !!(phy_data & + M88E1000_PSCR_POLARITY_REVERSAL); + + ret_val = e1000_check_polarity_m88(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX); + + if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { + ret_val = hw->phy.ops.get_cable_length(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + + phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + } else { + /* Set values to "undefined" */ + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + } + + return ret_val; +} + +/** + * e1000_get_phy_info_igp - Retrieve igp PHY information + * @hw: pointer to the HW structure + * + * Read PHY status to determine if link is up. If link is up, then + * set/determine 10base-T extended distance and polarity correction. Read + * PHY port status to determine MDI/MDIx and speed. Based on the speed, + * determine on the cable length, local and remote receiver. + **/ +s32 e1000_get_phy_info_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_igp"); + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + phy->polarity_correction = true; + + ret_val = e1000_check_polarity_igp(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX); + + if ((data & IGP01E1000_PSSR_SPEED_MASK) == + IGP01E1000_PSSR_SPEED_1000MBPS) { + ret_val = phy->ops.get_cable_length(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); + if (ret_val) + return ret_val; + + phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + + phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + } else { + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + } + + return ret_val; +} + +/** + * e1000_get_phy_info_ife - Retrieves various IFE PHY states + * @hw: pointer to the HW structure + * + * Populates "phy" structure with various feature states. + **/ +s32 e1000_get_phy_info_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_ife"); + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = phy->ops.read_reg(hw, IFE_PHY_SPECIAL_CONTROL, &data); + if (ret_val) + return ret_val; + phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE); + + if (phy->polarity_correction) { + ret_val = e1000_check_polarity_ife(hw); + if (ret_val) + return ret_val; + } else { + /* Polarity is forced */ + phy->cable_polarity = ((data & IFE_PSC_FORCE_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + } + + ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS); + + /* The following parameters are undefined for 10/100 operation. */ + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + + return E1000_SUCCESS; +} + +/** + * e1000_phy_sw_reset_generic - PHY software reset + * @hw: pointer to the HW structure + * + * Does a software reset of the PHY by reading the PHY control register and + * setting/write the control register reset bit to the PHY. + **/ +s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw) +{ + s32 ret_val; + u16 phy_ctrl; + + DEBUGFUNC("e1000_phy_sw_reset_generic"); + + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); + if (ret_val) + return ret_val; + + phy_ctrl |= MII_CR_RESET; + ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl); + if (ret_val) + return ret_val; + + usec_delay(1); + + return ret_val; +} + +/** + * e1000_phy_hw_reset_generic - PHY hardware reset + * @hw: pointer to the HW structure + * + * Verify the reset block is not blocking us from resetting. Acquire + * semaphore (if necessary) and read/set/write the device control reset + * bit in the PHY. Wait the appropriate delay time for the device to + * reset and release the semaphore (if necessary). + **/ +s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u32 ctrl; + + DEBUGFUNC("e1000_phy_hw_reset_generic"); + + if (phy->ops.check_reset_block) { + ret_val = phy->ops.check_reset_block(hw); + if (ret_val) + return E1000_SUCCESS; + } + + ret_val = phy->ops.acquire(hw); + if (ret_val) + return ret_val; + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_PHY_RST); + E1000_WRITE_FLUSH(hw); + + usec_delay(phy->reset_delay_us); + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + E1000_WRITE_FLUSH(hw); + + usec_delay(150); + + phy->ops.release(hw); + + return phy->ops.get_cfg_done(hw); +} + +/** + * e1000_get_cfg_done_generic - Generic configuration done + * @hw: pointer to the HW structure + * + * Generic function to wait 10 milli-seconds for configuration to complete + * and return success. + **/ +s32 e1000_get_cfg_done_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_get_cfg_done_generic"); + + msec_delay_irq(10); + + return E1000_SUCCESS; +} + +/** + * e1000_phy_init_script_igp3 - Inits the IGP3 PHY + * @hw: pointer to the HW structure + * + * Initializes a Intel Gigabit PHY3 when an EEPROM is not present. + **/ +s32 e1000_phy_init_script_igp3(struct e1000_hw *hw) +{ + DEBUGOUT("Running IGP 3 PHY init script\n"); + + /* PHY init IGP 3 */ + /* Enable rise/fall, 10-mode work in class-A */ + hw->phy.ops.write_reg(hw, 0x2F5B, 0x9018); + /* Remove all caps from Replica path filter */ + hw->phy.ops.write_reg(hw, 0x2F52, 0x0000); + /* Bias trimming for ADC, AFE and Driver (Default) */ + hw->phy.ops.write_reg(hw, 0x2FB1, 0x8B24); + /* Increase Hybrid poly bias */ + hw->phy.ops.write_reg(hw, 0x2FB2, 0xF8F0); + /* Add 4% to Tx amplitude in Gig mode */ + hw->phy.ops.write_reg(hw, 0x2010, 0x10B0); + /* Disable trimming (TTT) */ + hw->phy.ops.write_reg(hw, 0x2011, 0x0000); + /* Poly DC correction to 94.6% + 2% for all channels */ + hw->phy.ops.write_reg(hw, 0x20DD, 0x249A); + /* ABS DC correction to 95.9% */ + hw->phy.ops.write_reg(hw, 0x20DE, 0x00D3); + /* BG temp curve trim */ + hw->phy.ops.write_reg(hw, 0x28B4, 0x04CE); + /* Increasing ADC OPAMP stage 1 currents to max */ + hw->phy.ops.write_reg(hw, 0x2F70, 0x29E4); + /* Force 1000 ( required for enabling PHY regs configuration) */ + hw->phy.ops.write_reg(hw, 0x0000, 0x0140); + /* Set upd_freq to 6 */ + hw->phy.ops.write_reg(hw, 0x1F30, 0x1606); + /* Disable NPDFE */ + hw->phy.ops.write_reg(hw, 0x1F31, 0xB814); + /* Disable adaptive fixed FFE (Default) */ + hw->phy.ops.write_reg(hw, 0x1F35, 0x002A); + /* Enable FFE hysteresis */ + hw->phy.ops.write_reg(hw, 0x1F3E, 0x0067); + /* Fixed FFE for short cable lengths */ + hw->phy.ops.write_reg(hw, 0x1F54, 0x0065); + /* Fixed FFE for medium cable lengths */ + hw->phy.ops.write_reg(hw, 0x1F55, 0x002A); + /* Fixed FFE for long cable lengths */ + hw->phy.ops.write_reg(hw, 0x1F56, 0x002A); + /* Enable Adaptive Clip Threshold */ + hw->phy.ops.write_reg(hw, 0x1F72, 0x3FB0); + /* AHT reset limit to 1 */ + hw->phy.ops.write_reg(hw, 0x1F76, 0xC0FF); + /* Set AHT master delay to 127 msec */ + hw->phy.ops.write_reg(hw, 0x1F77, 0x1DEC); + /* Set scan bits for AHT */ + hw->phy.ops.write_reg(hw, 0x1F78, 0xF9EF); + /* Set AHT Preset bits */ + hw->phy.ops.write_reg(hw, 0x1F79, 0x0210); + /* Change integ_factor of channel A to 3 */ + hw->phy.ops.write_reg(hw, 0x1895, 0x0003); + /* Change prop_factor of channels BCD to 8 */ + hw->phy.ops.write_reg(hw, 0x1796, 0x0008); + /* Change cg_icount + enable integbp for channels BCD */ + hw->phy.ops.write_reg(hw, 0x1798, 0xD008); + /* Change cg_icount + enable integbp + change prop_factor_master + * to 8 for channel A + */ + hw->phy.ops.write_reg(hw, 0x1898, 0xD918); + /* Disable AHT in Slave mode on channel A */ + hw->phy.ops.write_reg(hw, 0x187A, 0x0800); + /* Enable LPLU and disable AN to 1000 in non-D0a states, + * Enable SPD+B2B + */ + hw->phy.ops.write_reg(hw, 0x0019, 0x008D); + /* Enable restart AN on an1000_dis change */ + hw->phy.ops.write_reg(hw, 0x001B, 0x2080); + /* Enable wh_fifo read clock in 10/100 modes */ + hw->phy.ops.write_reg(hw, 0x0014, 0x0045); + /* Restart AN, Speed selection is 1000 */ + hw->phy.ops.write_reg(hw, 0x0000, 0x1340); + + return E1000_SUCCESS; +} + +/** + * e1000_get_phy_type_from_id - Get PHY type from id + * @phy_id: phy_id read from the phy + * + * Returns the phy type from the id. + **/ +enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id) +{ + enum e1000_phy_type phy_type = e1000_phy_unknown; + + switch (phy_id) { + case M88E1000_I_PHY_ID: + case M88E1000_E_PHY_ID: + case M88E1111_I_PHY_ID: + case M88E1011_I_PHY_ID: + case M88E1543_E_PHY_ID: + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1340M_E_PHY_ID: + phy_type = e1000_phy_m88; + break; + case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */ + phy_type = e1000_phy_igp_2; + break; + case GG82563_E_PHY_ID: + phy_type = e1000_phy_gg82563; + break; + case IGP03E1000_E_PHY_ID: + phy_type = e1000_phy_igp_3; + break; + case IFE_E_PHY_ID: + case IFE_PLUS_E_PHY_ID: + case IFE_C_E_PHY_ID: + phy_type = e1000_phy_ife; + break; + case I82580_I_PHY_ID: + phy_type = e1000_phy_82580; + break; + case I210_I_PHY_ID: + phy_type = e1000_phy_i210; + break; + default: + phy_type = e1000_phy_unknown; + break; + } + return phy_type; +} + +/** + * e1000_determine_phy_address - Determines PHY address. + * @hw: pointer to the HW structure + * + * This uses a trial and error method to loop through possible PHY + * addresses. It tests each by reading the PHY ID registers and + * checking for a match. + **/ +s32 e1000_determine_phy_address(struct e1000_hw *hw) +{ + u32 phy_addr = 0; + u32 i; + enum e1000_phy_type phy_type = e1000_phy_unknown; + + hw->phy.id = phy_type; + + for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) { + hw->phy.addr = phy_addr; + i = 0; + + do { + e1000_get_phy_id(hw); + phy_type = e1000_get_phy_type_from_id(hw->phy.id); + + /* If phy_type is valid, break - we found our + * PHY address + */ + if (phy_type != e1000_phy_unknown) + return E1000_SUCCESS; + + msec_delay(1); + i++; + } while (i < 10); + } + + return -E1000_ERR_PHY_TYPE; +} + +/** + * e1000_power_up_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, restore the link to previous + * settings. + **/ +void e1000_power_up_phy_copper(struct e1000_hw *hw) +{ + u16 mii_reg = 0; + u16 power_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); + mii_reg &= ~MII_CR_POWER_DOWN; + if (hw->phy.type == e1000_phy_i210) { + hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg); + power_reg &= ~GS40G_CS_POWER_DOWN; + hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg); + } + hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); +} + +/** + * e1000_power_down_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, restore the link to previous + * settings. + **/ +void e1000_power_down_phy_copper(struct e1000_hw *hw) +{ + u16 mii_reg = 0; + u16 power_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); + mii_reg |= MII_CR_POWER_DOWN; + /* i210 Phy requires an additional bit for power up/down */ + if (hw->phy.type == e1000_phy_i210) { + hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg); + power_reg |= GS40G_CS_POWER_DOWN; + hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg); + } + hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); + msec_delay(1); +} + +/** + * e1000_check_polarity_82577 - Checks the polarity. + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + * + * Polarity is determined based on the PHY specific status register. + **/ +s32 e1000_check_polarity_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_check_polarity_82577"); + + ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); + + if (!ret_val) + phy->cable_polarity = ((data & I82577_PHY_STATUS2_REV_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY + * @hw: pointer to the HW structure + * + * Calls the PHY setup function to force speed and duplex. + **/ +s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_82577"); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &phy_data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); + if (ret_val) + return ret_val; + + usec_delay(1); + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on 82577 phy\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) + DEBUGOUT("Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + } + + return ret_val; +} + +/** + * e1000_get_phy_info_82577 - Retrieve I82577 PHY information + * @hw: pointer to the HW structure + * + * Read PHY status to determine if link is up. If link is up, then + * set/determine 10base-T extended distance and polarity correction. Read + * PHY port status to determine MDI/MDIx and speed. Based on the speed, + * determine on the cable length, local and remote receiver. + **/ +s32 e1000_get_phy_info_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_82577"); + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + phy->polarity_correction = true; + + ret_val = e1000_check_polarity_82577(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX); + + if ((data & I82577_PHY_STATUS2_SPEED_MASK) == + I82577_PHY_STATUS2_SPEED_1000MBPS) { + ret_val = hw->phy.ops.get_cable_length(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); + if (ret_val) + return ret_val; + + phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + + phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + } else { + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + } + + return E1000_SUCCESS; +} + +/** + * e1000_get_cable_length_82577 - Determine cable length for 82577 PHY + * @hw: pointer to the HW structure + * + * Reads the diagnostic status register and verifies result is valid before + * placing it in the phy_cable_length field. + **/ +s32 e1000_get_cable_length_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, length; + + DEBUGFUNC("e1000_get_cable_length_82577"); + + ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data); + if (ret_val) + return ret_val; + + length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >> + I82577_DSTATUS_CABLE_LENGTH_SHIFT); + + if (length == E1000_CABLE_LENGTH_UNDEFINED) + return -E1000_ERR_PHY; + + phy->cable_length = length; + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_gs40g - Write GS40G PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data) +{ + s32 ret_val; + u16 page = offset >> GS40G_PAGE_SHIFT; + + DEBUGFUNC("e1000_write_phy_reg_gs40g"); + + offset = offset & GS40G_OFFSET_MASK; + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); + if (ret_val) + goto release; + ret_val = e1000_write_phy_reg_mdic(hw, offset, data); + +release: + hw->phy.ops.release(hw); + return ret_val; +} + +/** + * e1000_read_phy_reg_gs40g - Read GS40G PHY register + * @hw: pointer to the HW structure + * @offset: lower half is register offset to read to + * upper half is page to use. + * @data: data to read at register offset + * + * Acquires semaphore, if necessary, then reads the data in the PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data) +{ + s32 ret_val; + u16 page = offset >> GS40G_PAGE_SHIFT; + + DEBUGFUNC("e1000_read_phy_reg_gs40g"); + + offset = offset & GS40G_OFFSET_MASK; + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); + if (ret_val) + goto release; + ret_val = e1000_read_phy_reg_mdic(hw, offset, data); + +release: + hw->phy.ops.release(hw); + return ret_val; +} + +/** + * e1000_read_phy_reg_mphy - Read mPHY control register + * @hw: pointer to the HW structure + * @address: address to be read + * @data: pointer to the read data + * + * Reads the mPHY control register in the PHY at offset and stores the + * information read to data. + **/ +s32 e1000_read_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 *data) +{ + u32 mphy_ctrl = 0; + bool locked = false; + bool ready = false; + + DEBUGFUNC("e1000_read_phy_reg_mphy"); + + /* Check if mPHY is ready to read/write operations */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* Check if mPHY access is disabled and enable it if so */ + mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); + if (mphy_ctrl & E1000_MPHY_DIS_ACCESS) { + locked = true; + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + mphy_ctrl |= E1000_MPHY_ENA_ACCESS; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + } + + /* Set the address that we want to read */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* We mask address, because we want to use only current lane */ + mphy_ctrl = (mphy_ctrl & ~E1000_MPHY_ADDRESS_MASK & + ~E1000_MPHY_ADDRESS_FNC_OVERRIDE) | + (address & E1000_MPHY_ADDRESS_MASK); + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + + /* Read data from the address */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + *data = E1000_READ_REG(hw, E1000_MPHY_DATA); + + /* Disable access to mPHY if it was originally disabled */ + if (locked) { + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, + E1000_MPHY_DIS_ACCESS); + } + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_mphy - Write mPHY control register + * @hw: pointer to the HW structure + * @address: address to write to + * @data: data to write to register at offset + * @line_override: used when we want to use different line than default one + * + * Writes data to mPHY control register. + **/ +s32 e1000_write_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 data, + bool line_override) +{ + u32 mphy_ctrl = 0; + bool locked = false; + bool ready = false; + + DEBUGFUNC("e1000_write_phy_reg_mphy"); + + /* Check if mPHY is ready to read/write operations */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* Check if mPHY access is disabled and enable it if so */ + mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); + if (mphy_ctrl & E1000_MPHY_DIS_ACCESS) { + locked = true; + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + mphy_ctrl |= E1000_MPHY_ENA_ACCESS; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + } + + /* Set the address that we want to read */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* We mask address, because we want to use only current lane */ + if (line_override) + mphy_ctrl |= E1000_MPHY_ADDRESS_FNC_OVERRIDE; + else + mphy_ctrl &= ~E1000_MPHY_ADDRESS_FNC_OVERRIDE; + mphy_ctrl = (mphy_ctrl & ~E1000_MPHY_ADDRESS_MASK) | + (address & E1000_MPHY_ADDRESS_MASK); + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + + /* Read data from the address */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + E1000_WRITE_REG(hw, E1000_MPHY_DATA, data); + + /* Disable access to mPHY if it was originally disabled */ + if (locked) { + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, + E1000_MPHY_DIS_ACCESS); + } + + return E1000_SUCCESS; +} + +/** + * e1000_is_mphy_ready - Check if mPHY control register is not busy + * @hw: pointer to the HW structure + * + * Returns mPHY control register status. + **/ +bool e1000_is_mphy_ready(struct e1000_hw *hw) +{ + u16 retry_count = 0; + u32 mphy_ctrl = 0; + bool ready = false; + + while (retry_count < 2) { + mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); + if (mphy_ctrl & E1000_MPHY_BUSY) { + usec_delay(20); + retry_count++; + continue; + } + ready = true; + break; + } + + if (!ready) + DEBUGOUT("ERROR READING mPHY control register, phy is busy.\n"); + + return ready; +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_phy.h b/kernel/linux/kni/ethtool/igb/e1000_phy.h new file mode 100644 index 00000000..67e9ba77 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_phy.h @@ -0,0 +1,241 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_PHY_H_ +#define _E1000_PHY_H_ + +void e1000_init_phy_ops_generic(struct e1000_hw *hw); +s32 e1000_null_read_reg(struct e1000_hw *hw, u32 offset, u16 *data); +void e1000_null_phy_generic(struct e1000_hw *hw); +s32 e1000_null_lplu_state(struct e1000_hw *hw, bool active); +s32 e1000_null_write_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_null_set_page(struct e1000_hw *hw, u16 data); +s32 e1000_read_i2c_byte_null(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +s32 e1000_write_i2c_byte_null(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); +s32 e1000_check_downshift_generic(struct e1000_hw *hw); +s32 e1000_check_polarity_m88(struct e1000_hw *hw); +s32 e1000_check_polarity_igp(struct e1000_hw *hw); +s32 e1000_check_polarity_ife(struct e1000_hw *hw); +s32 e1000_check_reset_block_generic(struct e1000_hw *hw); +s32 e1000_copper_link_setup_igp(struct e1000_hw *hw); +s32 e1000_copper_link_setup_m88(struct e1000_hw *hw); +s32 e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); +s32 e1000_get_cable_length_m88(struct e1000_hw *hw); +s32 e1000_get_cable_length_m88_gen2(struct e1000_hw *hw); +s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw); +s32 e1000_get_cfg_done_generic(struct e1000_hw *hw); +s32 e1000_get_phy_id(struct e1000_hw *hw); +s32 e1000_get_phy_info_igp(struct e1000_hw *hw); +s32 e1000_get_phy_info_m88(struct e1000_hw *hw); +s32 e1000_get_phy_info_ife(struct e1000_hw *hw); +s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw); +void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); +s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw); +s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw); +s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page); +s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active); +s32 e1000_setup_copper_link_generic(struct e1000_hw *hw); +s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, + u32 usec_interval, bool *success); +s32 e1000_phy_init_script_igp3(struct e1000_hw *hw); +enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id); +s32 e1000_determine_phy_address(struct e1000_hw *hw); +s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg); +s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg); +void e1000_power_up_phy_copper(struct e1000_hw *hw); +void e1000_power_down_phy_copper(struct e1000_hw *hw); +s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data); +s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data); +s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); +s32 e1000_check_polarity_82577(struct e1000_hw *hw); +s32 e1000_get_phy_info_82577(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw); +s32 e1000_get_cable_length_82577(struct e1000_hw *hw); +s32 e1000_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 *data); +s32 e1000_write_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 data, + bool line_override); +bool e1000_is_mphy_ready(struct e1000_hw *hw); + +#define E1000_MAX_PHY_ADDR 8 + +/* IGP01E1000 Specific Registers */ +#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ +#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */ +#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */ +#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */ +#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */ +#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */ +#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */ +#define IGP_PAGE_SHIFT 5 +#define PHY_REG_MASK 0x1F + +/* GS40G - I210 PHY defines */ +#define GS40G_PAGE_SELECT 0x16 +#define GS40G_PAGE_SHIFT 16 +#define GS40G_OFFSET_MASK 0xFFFF +#define GS40G_PAGE_2 0x20000 +#define GS40G_MAC_REG2 0x15 +#define GS40G_MAC_LB 0x4140 +#define GS40G_MAC_SPEED_1G 0X0006 +#define GS40G_COPPER_SPEC 0x0010 +#define GS40G_CS_POWER_DOWN 0x0002 + +#define HV_INTC_FC_PAGE_START 768 +#define I82578_ADDR_REG 29 +#define I82577_ADDR_REG 16 +#define I82577_CFG_REG 22 +#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) +#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift */ +#define I82577_CTRL_REG 23 + +/* 82577 specific PHY registers */ +#define I82577_PHY_CTRL_2 18 +#define I82577_PHY_LBK_CTRL 19 +#define I82577_PHY_STATUS_2 26 +#define I82577_PHY_DIAG_STATUS 31 + +/* I82577 PHY Status 2 */ +#define I82577_PHY_STATUS2_REV_POLARITY 0x0400 +#define I82577_PHY_STATUS2_MDIX 0x0800 +#define I82577_PHY_STATUS2_SPEED_MASK 0x0300 +#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200 + +/* I82577 PHY Control 2 */ +#define I82577_PHY_CTRL2_MANUAL_MDIX 0x0200 +#define I82577_PHY_CTRL2_AUTO_MDI_MDIX 0x0400 +#define I82577_PHY_CTRL2_MDIX_CFG_MASK 0x0600 + +/* I82577 PHY Diagnostics Status */ +#define I82577_DSTATUS_CABLE_LENGTH 0x03FC +#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2 + +/* 82580 PHY Power Management */ +#define E1000_82580_PHY_POWER_MGMT 0xE14 +#define E1000_82580_PM_SPD 0x0001 /* Smart Power Down */ +#define E1000_82580_PM_D0_LPLU 0x0002 /* For D0a states */ +#define E1000_82580_PM_D3_LPLU 0x0004 /* For all other states */ +#define E1000_82580_PM_GO_LINKD 0x0020 /* Go Link Disconnect */ + +#define E1000_MPHY_DIS_ACCESS 0x80000000 /* disable_access bit */ +#define E1000_MPHY_ENA_ACCESS 0x40000000 /* enable_access bit */ +#define E1000_MPHY_BUSY 0x00010000 /* busy bit */ +#define E1000_MPHY_ADDRESS_FNC_OVERRIDE 0x20000000 /* fnc_override bit */ +#define E1000_MPHY_ADDRESS_MASK 0x0000FFFF /* address mask */ + +#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 +#define IGP01E1000_PHY_POLARITY_MASK 0x0078 + +#define IGP01E1000_PSCR_AUTO_MDIX 0x1000 +#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */ + +#define IGP01E1000_PSCFR_SMART_SPEED 0x0080 + +#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ +#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */ +#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */ + +#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 + +#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 +#define IGP01E1000_PSSR_MDIX 0x0800 +#define IGP01E1000_PSSR_SPEED_MASK 0xC000 +#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 + +#define IGP02E1000_PHY_CHANNEL_NUM 4 +#define IGP02E1000_PHY_AGC_A 0x11B1 +#define IGP02E1000_PHY_AGC_B 0x12B1 +#define IGP02E1000_PHY_AGC_C 0x14B1 +#define IGP02E1000_PHY_AGC_D 0x18B1 + +#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course=15:13, Fine=12:9 */ +#define IGP02E1000_AGC_LENGTH_MASK 0x7F +#define IGP02E1000_AGC_RANGE 15 + +#define E1000_CABLE_LENGTH_UNDEFINED 0xFF + +#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000 +#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16 +#define E1000_KMRNCTRLSTA_REN 0x00200000 +#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */ +#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */ +#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */ +#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */ +#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */ + +#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 +#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Ctrl */ +#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Ctrl */ +#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */ + +/* IFE PHY Extended Status Control */ +#define IFE_PESC_POLARITY_REVERSED 0x0100 + +/* IFE PHY Special Control */ +#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 +#define IFE_PSC_FORCE_POLARITY 0x0020 + +/* IFE PHY Special Control and LED Control */ +#define IFE_PSCL_PROBE_MODE 0x0020 +#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ +#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ + +/* IFE PHY MDIX Control */ +#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ +#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */ +#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto, 0=disable */ + +/* SFP modules ID memory locations */ +#define E1000_SFF_IDENTIFIER_OFFSET 0x00 +#define E1000_SFF_IDENTIFIER_SFF 0x02 +#define E1000_SFF_IDENTIFIER_SFP 0x03 + +#define E1000_SFF_ETH_FLAGS_OFFSET 0x06 +/* Flags for SFP modules compatible with ETH up to 1Gb */ +struct sfp_e1000_flags { + u8 e1000_base_sx:1; + u8 e1000_base_lx:1; + u8 e1000_base_cx:1; + u8 e1000_base_t:1; + u8 e100_base_lx:1; + u8 e100_base_fx:1; + u8 e10_base_bx10:1; + u8 e10_base_px:1; +}; + +/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */ +#define E1000_SFF_VENDOR_OUI_TYCO 0x00407600 +#define E1000_SFF_VENDOR_OUI_FTL 0x00906500 +#define E1000_SFF_VENDOR_OUI_AVAGO 0x00176A00 +#define E1000_SFF_VENDOR_OUI_INTEL 0x001B2100 + +#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_regs.h b/kernel/linux/kni/ethtool/igb/e1000_regs.h new file mode 100644 index 00000000..f5c7e031 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_regs.h @@ -0,0 +1,631 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_REGS_H_ +#define _E1000_REGS_H_ + +#define E1000_CTRL 0x00000 /* Device Control - RW */ +#define E1000_STATUS 0x00008 /* Device Status - RO */ +#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ +#define E1000_EERD 0x00014 /* EEPROM Read - RW */ +#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ +#define E1000_FLA 0x0001C /* Flash Access - RW */ +#define E1000_MDIC 0x00020 /* MDI Control - RW */ +#define E1000_MDICNFG 0x00E04 /* MDI Config - RW */ +#define E1000_REGISTER_SET_SIZE 0x20000 /* CSR Size */ +#define E1000_EEPROM_INIT_CTRL_WORD_2 0x0F /* EEPROM Init Ctrl Word 2 */ +#define E1000_EEPROM_PCIE_CTRL_WORD_2 0x28 /* EEPROM PCIe Ctrl Word 2 */ +#define E1000_BARCTRL 0x5BBC /* BAR ctrl reg */ +#define E1000_BARCTRL_FLSIZE 0x0700 /* BAR ctrl Flsize */ +#define E1000_BARCTRL_CSRSIZE 0x2000 /* BAR ctrl CSR size */ +#define E1000_MPHY_ADDR_CTRL 0x0024 /* GbE MPHY Address Control */ +#define E1000_MPHY_DATA 0x0E10 /* GBE MPHY Data */ +#define E1000_MPHY_STAT 0x0E0C /* GBE MPHY Statistics */ +#define E1000_PPHY_CTRL 0x5b48 /* PCIe PHY Control */ +#define E1000_I350_BARCTRL 0x5BFC /* BAR ctrl reg */ +#define E1000_I350_DTXMXPKTSZ 0x355C /* Maximum sent packet size reg*/ +#define E1000_SCTL 0x00024 /* SerDes Control - RW */ +#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ +#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ +#define E1000_FCT 0x00030 /* Flow Control Type - RW */ +#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */ +#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ +#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ +#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ +#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ +#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ +#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ +#define E1000_RCTL 0x00100 /* Rx Control - RW */ +#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ +#define E1000_TXCW 0x00178 /* Tx Configuration Word - RW */ +#define E1000_RXCW 0x00180 /* Rx Configuration Word - RO */ +#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ +#define E1000_EITR(_n) (0x01680 + (0x4 * (_n))) +#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */ +#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */ +#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */ +#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */ +#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */ +#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */ +#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */ +#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */ +#define E1000_TCTL 0x00400 /* Tx Control - RW */ +#define E1000_TCTL_EXT 0x00404 /* Extended Tx Control - RW */ +#define E1000_TIPG 0x00410 /* Tx Inter-packet gap -RW */ +#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ +#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_LEDMUX 0x08130 /* LED MUX Control */ +#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ +#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ +#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ +#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ +#define E1000_PBS 0x01008 /* Packet Buffer Size */ +#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ +#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ +#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */ +#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */ +#define E1000_I2CBB_EN 0x00000100 /* I2C - Bit Bang Enable */ +#define E1000_I2C_CLK_OUT 0x00000200 /* I2C- Clock */ +#define E1000_I2C_DATA_OUT 0x00000400 /* I2C- Data Out */ +#define E1000_I2C_DATA_OE_N 0x00000800 /* I2C- Data Output Enable */ +#define E1000_I2C_DATA_IN 0x00001000 /* I2C- Data In */ +#define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */ +#define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */ +#define E1000_I2C_CLK_STRETCH_DIS 0x00008000 /* I2C- Dis Clk Stretching */ +#define E1000_WDSTP 0x01040 /* Watchdog Setup - RW */ +#define E1000_SWDSTS 0x01044 /* SW Device Status - RW */ +#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */ +#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */ +#define E1000_VPDDIAG 0x01060 /* VPD Diagnostic - RO */ +#define E1000_ICR_V2 0x01500 /* Intr Cause - new location - RC */ +#define E1000_ICS_V2 0x01504 /* Intr Cause Set - new location - WO */ +#define E1000_IMS_V2 0x01508 /* Intr Mask Set/Read - new location - RW */ +#define E1000_IMC_V2 0x0150C /* Intr Mask Clear - new location - WO */ +#define E1000_IAM_V2 0x01510 /* Intr Ack Auto Mask - new location - RW */ +#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ +#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ +#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ +#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ +#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ +#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ +#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ +#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ +#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ +#define E1000_PBRTH 0x02458 /* PB Rx Arbitration Threshold - RW */ +#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */ +/* Split and Replication Rx Control - RW */ +#define E1000_RDPUMB 0x025CC /* DMA Rx Descriptor uC Mailbox - RW */ +#define E1000_RDPUAD 0x025D0 /* DMA Rx Descriptor uC Addr Command - RW */ +#define E1000_RDPUWD 0x025D4 /* DMA Rx Descriptor uC Data Write - RW */ +#define E1000_RDPURD 0x025D8 /* DMA Rx Descriptor uC Data Read - RW */ +#define E1000_RDPUCTL 0x025DC /* DMA Rx Descriptor uC Control - RW */ +#define E1000_PBDIAG 0x02458 /* Packet Buffer Diagnostic - RW */ +#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */ +#define E1000_IRPBS 0x02404 /* Same as RXPBS, renamed for newer Si - RW */ +#define E1000_PBRWAC 0x024E8 /* Rx packet buffer wrap around counter - RO */ +#define E1000_RDTR 0x02820 /* Rx Delay Timer - RW */ +#define E1000_RADV 0x0282C /* Rx Interrupt Absolute Delay Timer - RW */ +#define E1000_EMIADD 0x10 /* Extended Memory Indirect Address */ +#define E1000_EMIDATA 0x11 /* Extended Memory Indirect Data */ +#define E1000_SRWR 0x12018 /* Shadow Ram Write Register - RW */ +#define E1000_I210_FLMNGCTL 0x12038 +#define E1000_I210_FLMNGDATA 0x1203C +#define E1000_I210_FLMNGCNT 0x12040 + +#define E1000_I210_FLSWCTL 0x12048 +#define E1000_I210_FLSWDATA 0x1204C +#define E1000_I210_FLSWCNT 0x12050 + +#define E1000_I210_FLA 0x1201C + +#define E1000_INVM_DATA_REG(_n) (0x12120 + 4*(_n)) +#define E1000_INVM_SIZE 64 /* Number of INVM Data Registers */ + +/* QAV Tx mode control register */ +#define E1000_I210_TQAVCTRL 0x3570 + +/* QAV Tx mode control register bitfields masks */ +/* QAV enable */ +#define E1000_TQAVCTRL_MODE (1 << 0) +/* Fetching arbitration type */ +#define E1000_TQAVCTRL_FETCH_ARB (1 << 4) +/* Fetching timer enable */ +#define E1000_TQAVCTRL_FETCH_TIMER_ENABLE (1 << 5) +/* Launch arbitration type */ +#define E1000_TQAVCTRL_LAUNCH_ARB (1 << 8) +/* Launch timer enable */ +#define E1000_TQAVCTRL_LAUNCH_TIMER_ENABLE (1 << 9) +/* SP waits for SR enable */ +#define E1000_TQAVCTRL_SP_WAIT_SR (1 << 10) +/* Fetching timer correction */ +#define E1000_TQAVCTRL_FETCH_TIMER_DELTA_OFFSET 16 +#define E1000_TQAVCTRL_FETCH_TIMER_DELTA \ + (0xFFFF << E1000_TQAVCTRL_FETCH_TIMER_DELTA_OFFSET) + +/* High credit registers where _n can be 0 or 1. */ +#define E1000_I210_TQAVHC(_n) (0x300C + 0x40 * (_n)) + +/* Queues fetch arbitration priority control register */ +#define E1000_I210_TQAVARBCTRL 0x3574 +/* Queues priority masks where _n and _p can be 0-3. */ +#define E1000_TQAVARBCTRL_QUEUE_PRI(_n, _p) ((_p) << (2 * _n)) +/* QAV Tx mode control registers where _n can be 0 or 1. */ +#define E1000_I210_TQAVCC(_n) (0x3004 + 0x40 * (_n)) + +/* QAV Tx mode control register bitfields masks */ +#define E1000_TQAVCC_IDLE_SLOPE 0xFFFF /* Idle slope */ +#define E1000_TQAVCC_KEEP_CREDITS (1 << 30) /* Keep credits opt enable */ +#define E1000_TQAVCC_QUEUE_MODE (1 << 31) /* SP vs. SR Tx mode */ + +/* Good transmitted packets counter registers */ +#define E1000_PQGPTC(_n) (0x010014 + (0x100 * (_n))) + +/* Queues packet buffer size masks where _n can be 0-3 and _s 0-63 [kB] */ +#define E1000_I210_TXPBS_SIZE(_n, _s) ((_s) << (6 * _n)) + +#define E1000_MMDAC 13 /* MMD Access Control */ +#define E1000_MMDAAD 14 /* MMD Access Address/Data */ + +/* Convenience macros + * + * Note: "_n" is the queue number of the register to be written to. + * + * Example usage: + * E1000_RDBAL_REG(current_rx_queue) + */ +#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \ + (0x0C000 + ((_n) * 0x40))) +#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \ + (0x0C004 + ((_n) * 0x40))) +#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \ + (0x0C008 + ((_n) * 0x40))) +#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \ + (0x0C00C + ((_n) * 0x40))) +#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \ + (0x0C010 + ((_n) * 0x40))) +#define E1000_RXCTL(_n) ((_n) < 4 ? (0x02814 + ((_n) * 0x100)) : \ + (0x0C014 + ((_n) * 0x40))) +#define E1000_DCA_RXCTRL(_n) E1000_RXCTL(_n) +#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \ + (0x0C018 + ((_n) * 0x40))) +#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \ + (0x0C028 + ((_n) * 0x40))) +#define E1000_RQDPC(_n) ((_n) < 4 ? (0x02830 + ((_n) * 0x100)) : \ + (0x0C030 + ((_n) * 0x40))) +#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \ + (0x0E000 + ((_n) * 0x40))) +#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \ + (0x0E004 + ((_n) * 0x40))) +#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \ + (0x0E008 + ((_n) * 0x40))) +#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \ + (0x0E010 + ((_n) * 0x40))) +#define E1000_TXCTL(_n) ((_n) < 4 ? (0x03814 + ((_n) * 0x100)) : \ + (0x0E014 + ((_n) * 0x40))) +#define E1000_DCA_TXCTRL(_n) E1000_TXCTL(_n) +#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \ + (0x0E018 + ((_n) * 0x40))) +#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \ + (0x0E028 + ((_n) * 0x40))) +#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) : \ + (0x0E038 + ((_n) * 0x40))) +#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) : \ + (0x0E03C + ((_n) * 0x40))) +#define E1000_TARC(_n) (0x03840 + ((_n) * 0x100)) +#define E1000_RSRPD 0x02C00 /* Rx Small Packet Detect - RW */ +#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ +#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ +#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4)) +#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ + (0x054E0 + ((_i - 16) * 8))) +#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ + (0x054E4 + ((_i - 16) * 8))) +#define E1000_SHRAL(_i) (0x05438 + ((_i) * 8)) +#define E1000_SHRAH(_i) (0x0543C + ((_i) * 8)) +#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8)) +#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4)) +#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4)) +#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8)) +#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8)) +#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8)) +#define E1000_PBSLAC 0x03100 /* Pkt Buffer Slave Access Control */ +#define E1000_PBSLAD(_n) (0x03110 + (0x4 * (_n))) /* Pkt Buffer DWORD */ +#define E1000_TXPBS 0x03404 /* Tx Packet Buffer Size - RW */ +/* Same as TXPBS, renamed for newer Si - RW */ +#define E1000_ITPBS 0x03404 +#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ +#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ +#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ +#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ +#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ +#define E1000_TDPUMB 0x0357C /* DMA Tx Desc uC Mail Box - RW */ +#define E1000_TDPUAD 0x03580 /* DMA Tx Desc uC Addr Command - RW */ +#define E1000_TDPUWD 0x03584 /* DMA Tx Desc uC Data Write - RW */ +#define E1000_TDPURD 0x03588 /* DMA Tx Desc uC Data Read - RW */ +#define E1000_TDPUCTL 0x0358C /* DMA Tx Desc uC Control - RW */ +#define E1000_DTXCTL 0x03590 /* DMA Tx Control - RW */ +#define E1000_DTXTCPFLGL 0x0359C /* DMA Tx Control flag low - RW */ +#define E1000_DTXTCPFLGH 0x035A0 /* DMA Tx Control flag high - RW */ +/* DMA Tx Max Total Allow Size Reqs - RW */ +#define E1000_DTXMXSZRQ 0x03540 +#define E1000_TIDV 0x03820 /* Tx Interrupt Delay Value - RW */ +#define E1000_TADV 0x0382C /* Tx Interrupt Absolute Delay Val - RW */ +#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ +#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ +#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ +#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ +#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ +#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ +#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ +#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ +#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ +#define E1000_COLC 0x04028 /* Collision Count - R/clr */ +#define E1000_DC 0x04030 /* Defer Count - R/clr */ +#define E1000_TNCRS 0x04034 /* Tx-No CRS - R/clr */ +#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ +#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ +#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ +#define E1000_XONRXC 0x04048 /* XON Rx Count - R/clr */ +#define E1000_XONTXC 0x0404C /* XON Tx Count - R/clr */ +#define E1000_XOFFRXC 0x04050 /* XOFF Rx Count - R/clr */ +#define E1000_XOFFTXC 0x04054 /* XOFF Tx Count - R/clr */ +#define E1000_FCRUC 0x04058 /* Flow Control Rx Unsupported Count- R/clr */ +#define E1000_PRC64 0x0405C /* Packets Rx (64 bytes) - R/clr */ +#define E1000_PRC127 0x04060 /* Packets Rx (65-127 bytes) - R/clr */ +#define E1000_PRC255 0x04064 /* Packets Rx (128-255 bytes) - R/clr */ +#define E1000_PRC511 0x04068 /* Packets Rx (255-511 bytes) - R/clr */ +#define E1000_PRC1023 0x0406C /* Packets Rx (512-1023 bytes) - R/clr */ +#define E1000_PRC1522 0x04070 /* Packets Rx (1024-1522 bytes) - R/clr */ +#define E1000_GPRC 0x04074 /* Good Packets Rx Count - R/clr */ +#define E1000_BPRC 0x04078 /* Broadcast Packets Rx Count - R/clr */ +#define E1000_MPRC 0x0407C /* Multicast Packets Rx Count - R/clr */ +#define E1000_GPTC 0x04080 /* Good Packets Tx Count - R/clr */ +#define E1000_GORCL 0x04088 /* Good Octets Rx Count Low - R/clr */ +#define E1000_GORCH 0x0408C /* Good Octets Rx Count High - R/clr */ +#define E1000_GOTCL 0x04090 /* Good Octets Tx Count Low - R/clr */ +#define E1000_GOTCH 0x04094 /* Good Octets Tx Count High - R/clr */ +#define E1000_RNBC 0x040A0 /* Rx No Buffers Count - R/clr */ +#define E1000_RUC 0x040A4 /* Rx Undersize Count - R/clr */ +#define E1000_RFC 0x040A8 /* Rx Fragment Count - R/clr */ +#define E1000_ROC 0x040AC /* Rx Oversize Count - R/clr */ +#define E1000_RJC 0x040B0 /* Rx Jabber Count - R/clr */ +#define E1000_MGTPRC 0x040B4 /* Management Packets Rx Count - R/clr */ +#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ +#define E1000_MGTPTC 0x040BC /* Management Packets Tx Count - R/clr */ +#define E1000_TORL 0x040C0 /* Total Octets Rx Low - R/clr */ +#define E1000_TORH 0x040C4 /* Total Octets Rx High - R/clr */ +#define E1000_TOTL 0x040C8 /* Total Octets Tx Low - R/clr */ +#define E1000_TOTH 0x040CC /* Total Octets Tx High - R/clr */ +#define E1000_TPR 0x040D0 /* Total Packets Rx - R/clr */ +#define E1000_TPT 0x040D4 /* Total Packets Tx - R/clr */ +#define E1000_PTC64 0x040D8 /* Packets Tx (64 bytes) - R/clr */ +#define E1000_PTC127 0x040DC /* Packets Tx (65-127 bytes) - R/clr */ +#define E1000_PTC255 0x040E0 /* Packets Tx (128-255 bytes) - R/clr */ +#define E1000_PTC511 0x040E4 /* Packets Tx (256-511 bytes) - R/clr */ +#define E1000_PTC1023 0x040E8 /* Packets Tx (512-1023 bytes) - R/clr */ +#define E1000_PTC1522 0x040EC /* Packets Tx (1024-1522 Bytes) - R/clr */ +#define E1000_MPTC 0x040F0 /* Multicast Packets Tx Count - R/clr */ +#define E1000_BPTC 0x040F4 /* Broadcast Packets Tx Count - R/clr */ +#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context Tx - R/clr */ +#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context Tx Fail - R/clr */ +#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Pkt Timer Expire Count */ +#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Abs Timer Expire Count */ +#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Pkt Timer Expire Count */ +#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Abs Timer Expire Count */ +#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Min Thresh Count */ +#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Desc Min Thresh Count */ +#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ + +/* Virtualization statistical counters */ +#define E1000_PFVFGPRC(_n) (0x010010 + (0x100 * (_n))) +#define E1000_PFVFGPTC(_n) (0x010014 + (0x100 * (_n))) +#define E1000_PFVFGORC(_n) (0x010018 + (0x100 * (_n))) +#define E1000_PFVFGOTC(_n) (0x010034 + (0x100 * (_n))) +#define E1000_PFVFMPRC(_n) (0x010038 + (0x100 * (_n))) +#define E1000_PFVFGPRLBC(_n) (0x010040 + (0x100 * (_n))) +#define E1000_PFVFGPTLBC(_n) (0x010044 + (0x100 * (_n))) +#define E1000_PFVFGORLBC(_n) (0x010048 + (0x100 * (_n))) +#define E1000_PFVFGOTLBC(_n) (0x010050 + (0x100 * (_n))) + +/* LinkSec */ +#define E1000_LSECTXUT 0x04300 /* Tx Untagged Pkt Cnt */ +#define E1000_LSECTXPKTE 0x04304 /* Encrypted Tx Pkts Cnt */ +#define E1000_LSECTXPKTP 0x04308 /* Protected Tx Pkt Cnt */ +#define E1000_LSECTXOCTE 0x0430C /* Encrypted Tx Octets Cnt */ +#define E1000_LSECTXOCTP 0x04310 /* Protected Tx Octets Cnt */ +#define E1000_LSECRXUT 0x04314 /* Untagged non-Strict Rx Pkt Cnt */ +#define E1000_LSECRXOCTD 0x0431C /* Rx Octets Decrypted Count */ +#define E1000_LSECRXOCTV 0x04320 /* Rx Octets Validated */ +#define E1000_LSECRXBAD 0x04324 /* Rx Bad Tag */ +#define E1000_LSECRXNOSCI 0x04328 /* Rx Packet No SCI Count */ +#define E1000_LSECRXUNSCI 0x0432C /* Rx Packet Unknown SCI Count */ +#define E1000_LSECRXUNCH 0x04330 /* Rx Unchecked Packets Count */ +#define E1000_LSECRXDELAY 0x04340 /* Rx Delayed Packet Count */ +#define E1000_LSECRXLATE 0x04350 /* Rx Late Packets Count */ +#define E1000_LSECRXOK(_n) (0x04360 + (0x04 * (_n))) /* Rx Pkt OK Cnt */ +#define E1000_LSECRXINV(_n) (0x04380 + (0x04 * (_n))) /* Rx Invalid Cnt */ +#define E1000_LSECRXNV(_n) (0x043A0 + (0x04 * (_n))) /* Rx Not Valid Cnt */ +#define E1000_LSECRXUNSA 0x043C0 /* Rx Unused SA Count */ +#define E1000_LSECRXNUSA 0x043D0 /* Rx Not Using SA Count */ +#define E1000_LSECTXCAP 0x0B000 /* Tx Capabilities Register - RO */ +#define E1000_LSECRXCAP 0x0B300 /* Rx Capabilities Register - RO */ +#define E1000_LSECTXCTRL 0x0B004 /* Tx Control - RW */ +#define E1000_LSECRXCTRL 0x0B304 /* Rx Control - RW */ +#define E1000_LSECTXSCL 0x0B008 /* Tx SCI Low - RW */ +#define E1000_LSECTXSCH 0x0B00C /* Tx SCI High - RW */ +#define E1000_LSECTXSA 0x0B010 /* Tx SA0 - RW */ +#define E1000_LSECTXPN0 0x0B018 /* Tx SA PN 0 - RW */ +#define E1000_LSECTXPN1 0x0B01C /* Tx SA PN 1 - RW */ +#define E1000_LSECRXSCL 0x0B3D0 /* Rx SCI Low - RW */ +#define E1000_LSECRXSCH 0x0B3E0 /* Rx SCI High - RW */ +/* LinkSec Tx 128-bit Key 0 - WO */ +#define E1000_LSECTXKEY0(_n) (0x0B020 + (0x04 * (_n))) +/* LinkSec Tx 128-bit Key 1 - WO */ +#define E1000_LSECTXKEY1(_n) (0x0B030 + (0x04 * (_n))) +#define E1000_LSECRXSA(_n) (0x0B310 + (0x04 * (_n))) /* Rx SAs - RW */ +#define E1000_LSECRXPN(_n) (0x0B330 + (0x04 * (_n))) /* Rx SAs - RW */ +/* LinkSec Rx Keys - where _n is the SA no. and _m the 4 dwords of the 128 bit + * key - RW. + */ +#define E1000_LSECRXKEY(_n, _m) (0x0B350 + (0x10 * (_n)) + (0x04 * (_m))) + +#define E1000_SSVPC 0x041A0 /* Switch Security Violation Pkt Cnt */ +#define E1000_IPSCTRL 0xB430 /* IpSec Control Register */ +#define E1000_IPSRXCMD 0x0B408 /* IPSec Rx Command Register - RW */ +#define E1000_IPSRXIDX 0x0B400 /* IPSec Rx Index - RW */ +/* IPSec Rx IPv4/v6 Address - RW */ +#define E1000_IPSRXIPADDR(_n) (0x0B420 + (0x04 * (_n))) +/* IPSec Rx 128-bit Key - RW */ +#define E1000_IPSRXKEY(_n) (0x0B410 + (0x04 * (_n))) +#define E1000_IPSRXSALT 0x0B404 /* IPSec Rx Salt - RW */ +#define E1000_IPSRXSPI 0x0B40C /* IPSec Rx SPI - RW */ +/* IPSec Tx 128-bit Key - RW */ +#define E1000_IPSTXKEY(_n) (0x0B460 + (0x04 * (_n))) +#define E1000_IPSTXSALT 0x0B454 /* IPSec Tx Salt - RW */ +#define E1000_IPSTXIDX 0x0B450 /* IPSec Tx SA IDX - RW */ +#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */ +#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */ +#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */ +#define E1000_CBTMPC 0x0402C /* Circuit Breaker Tx Packet Count */ +#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */ +#define E1000_CBRDPC 0x04044 /* Circuit Breaker Rx Dropped Count */ +#define E1000_CBRMPC 0x040FC /* Circuit Breaker Rx Packet Count */ +#define E1000_RPTHC 0x04104 /* Rx Packets To Host */ +#define E1000_HGPTC 0x04118 /* Host Good Packets Tx Count */ +#define E1000_HTCBDPC 0x04124 /* Host Tx Circuit Breaker Dropped Count */ +#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */ +#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */ +#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */ +#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */ +#define E1000_LENERRS 0x04138 /* Length Errors Count */ +#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */ +#define E1000_HRMPC 0x0A018 /* Header Redirection Missed Packet Count */ +#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */ +#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */ +#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */ +#define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Pg - RW */ +#define E1000_RXCSUM 0x05000 /* Rx Checksum Control - RW */ +#define E1000_RLPML 0x05004 /* Rx Long Packet Max Length */ +#define E1000_RFCTL 0x05008 /* Receive Filter Control*/ +#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ +#define E1000_RA 0x05400 /* Receive Address - RW Array */ +#define E1000_RA2 0x054E0 /* 2nd half of Rx address array - RW Array */ +#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ +#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */ +#define E1000_CIAA 0x05B88 /* Config Indirect Access Address - RW */ +#define E1000_CIAD 0x05B8C /* Config Indirect Access Data - RW */ +#define E1000_VFQA0 0x0B000 /* VLAN Filter Queue Array 0 - RW Array */ +#define E1000_VFQA1 0x0B200 /* VLAN Filter Queue Array 1 - RW Array */ +#define E1000_WUC 0x05800 /* Wakeup Control - RW */ +#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ +#define E1000_WUS 0x05810 /* Wakeup Status - RO */ +#define E1000_MANC 0x05820 /* Management Control - RW */ +#define E1000_IPAV 0x05838 /* IP Address Valid - RW */ +#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ +#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ +#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ +#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ +#define E1000_PBACL 0x05B68 /* MSIx PBA Clear - Read/Write 1's to clear */ +#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ +#define E1000_HOST_IF 0x08800 /* Host Interface */ +#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ +#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ +#define E1000_HIBBA 0x8F40 /* Host Interface Buffer Base Address */ +/* Flexible Host Filter Table */ +#define E1000_FHFT(_n) (0x09000 + ((_n) * 0x100)) +/* Ext Flexible Host Filter Table */ +#define E1000_FHFT_EXT(_n) (0x09A00 + ((_n) * 0x100)) + + +#define E1000_KMRNCTRLSTA 0x00034 /* MAC-PHY interface - RW */ +#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ +/* Management Decision Filters */ +#define E1000_MDEF(_n) (0x05890 + (4 * (_n))) +#define E1000_SW_FW_SYNC 0x05B5C /* SW-FW Synchronization - RW */ +#define E1000_CCMCTL 0x05B48 /* CCM Control Register */ +#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */ +#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */ +#define E1000_GCR 0x05B00 /* PCI-Ex Control */ +#define E1000_GCR2 0x05B64 /* PCI-Ex Control #2 */ +#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ +#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ +#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ +#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ +#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ +#define E1000_SWSM 0x05B50 /* SW Semaphore */ +#define E1000_FWSM 0x05B54 /* FW Semaphore */ +/* Driver-only SW semaphore (not used by BOOT agents) */ +#define E1000_SWSM2 0x05B58 +#define E1000_DCA_ID 0x05B70 /* DCA Requester ID Information - RO */ +#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */ +#define E1000_UFUSE 0x05B78 /* UFUSE - RO */ +#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ +#define E1000_HICR 0x08F00 /* Host Interface Control */ +#define E1000_FWSTS 0x08F0C /* FW Status */ + +/* RSS registers */ +#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ +#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ +#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */ +#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate INTR Ext*/ +#define E1000_IMIRVP 0x05AC0 /* Immediate INT Rx VLAN Priority -RW */ +#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4)) /* MSI-X Alloc Reg -RW */ +#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) /* Redirection Table - RW */ +#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW */ +#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ +#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ +/* VT Registers */ +#define E1000_SWPBS 0x03004 /* Switch Packet Buffer Size - RW */ +#define E1000_MBVFICR 0x00C80 /* Mailbox VF Cause - RWC */ +#define E1000_MBVFIMR 0x00C84 /* Mailbox VF int Mask - RW */ +#define E1000_VFLRE 0x00C88 /* VF Register Events - RWC */ +#define E1000_VFRE 0x00C8C /* VF Receive Enables */ +#define E1000_VFTE 0x00C90 /* VF Transmit Enables */ +#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */ +#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */ +#define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */ +#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */ +#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */ +#define E1000_IOVTCL 0x05BBC /* IOV Control Register */ +#define E1000_VMRCTL 0X05D80 /* Virtual Mirror Rule Control */ +#define E1000_VMRVLAN 0x05D90 /* Virtual Mirror Rule VLAN */ +#define E1000_VMRVM 0x05DA0 /* Virtual Mirror Rule VM */ +#define E1000_MDFB 0x03558 /* Malicious Driver free block */ +#define E1000_LVMMC 0x03548 /* Last VM Misbehavior cause */ +#define E1000_TXSWC 0x05ACC /* Tx Switch Control */ +#define E1000_SCCRL 0x05DB0 /* Storm Control Control */ +#define E1000_BSCTRH 0x05DB8 /* Broadcast Storm Control Threshold */ +#define E1000_MSCTRH 0x05DBC /* Multicast Storm Control Threshold */ +/* These act per VF so an array friendly macro is used */ +#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n))) +#define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n))) +#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n))) +#define E1000_VFVMBMEM(_n) (0x00800 + (_n)) +#define E1000_VMOLR(_n) (0x05AD0 + (4 * (_n))) +/* VLAN Virtual Machine Filter - RW */ +#define E1000_VLVF(_n) (0x05D00 + (4 * (_n))) +#define E1000_VMVIR(_n) (0x03700 + (4 * (_n))) +#define E1000_DVMOLR(_n) (0x0C038 + (0x40 * (_n))) /* DMA VM offload */ +#define E1000_VTCTRL(_n) (0x10000 + (0x100 * (_n))) /* VT Control */ +#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */ +#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */ +#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */ +#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */ +#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */ +#define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */ +#define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */ +#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */ +#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */ +#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */ +#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */ +#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */ +#define E1000_TIMADJL 0x0B60C /* Time sync time adjustment offset Low - RW */ +#define E1000_TIMADJH 0x0B610 /* Time sync time adjustment offset High - RW */ +#define E1000_TSAUXC 0x0B640 /* Timesync Auxiliary Control register */ +#define E1000_SYSTIMR 0x0B6F8 /* System time register Residue */ +#define E1000_TSICR 0x0B66C /* Interrupt Cause Register */ +#define E1000_TSIM 0x0B674 /* Interrupt Mask Register */ + +/* Filtering Registers */ +#define E1000_SAQF(_n) (0x05980 + (4 * (_n))) /* Source Address Queue Fltr */ +#define E1000_DAQF(_n) (0x059A0 + (4 * (_n))) /* Dest Address Queue Fltr */ +#define E1000_SPQF(_n) (0x059C0 + (4 * (_n))) /* Source Port Queue Fltr */ +#define E1000_FTQF(_n) (0x059E0 + (4 * (_n))) /* 5-tuple Queue Fltr */ +#define E1000_TTQF(_n) (0x059E0 + (4 * (_n))) /* 2-tuple Queue Fltr */ +#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */ +#define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */ + +#define E1000_RTTDCS 0x3600 /* Reedtown Tx Desc plane control and status */ +#define E1000_RTTPCS 0x3474 /* Reedtown Tx Packet Plane control and status */ +#define E1000_RTRPCS 0x2474 /* Rx packet plane control and status */ +#define E1000_RTRUP2TC 0x05AC4 /* Rx User Priority to Traffic Class */ +#define E1000_RTTUP2TC 0x0418 /* Transmit User Priority to Traffic Class */ +/* Tx Desc plane TC Rate-scheduler config */ +#define E1000_RTTDTCRC(_n) (0x3610 + ((_n) * 4)) +/* Tx Packet plane TC Rate-Scheduler Config */ +#define E1000_RTTPTCRC(_n) (0x3480 + ((_n) * 4)) +/* Rx Packet plane TC Rate-Scheduler Config */ +#define E1000_RTRPTCRC(_n) (0x2480 + ((_n) * 4)) +/* Tx Desc Plane TC Rate-Scheduler Status */ +#define E1000_RTTDTCRS(_n) (0x3630 + ((_n) * 4)) +/* Tx Desc Plane TC Rate-Scheduler MMW */ +#define E1000_RTTDTCRM(_n) (0x3650 + ((_n) * 4)) +/* Tx Packet plane TC Rate-Scheduler Status */ +#define E1000_RTTPTCRS(_n) (0x34A0 + ((_n) * 4)) +/* Tx Packet plane TC Rate-scheduler MMW */ +#define E1000_RTTPTCRM(_n) (0x34C0 + ((_n) * 4)) +/* Rx Packet plane TC Rate-Scheduler Status */ +#define E1000_RTRPTCRS(_n) (0x24A0 + ((_n) * 4)) +/* Rx Packet plane TC Rate-Scheduler MMW */ +#define E1000_RTRPTCRM(_n) (0x24C0 + ((_n) * 4)) +/* Tx Desc plane VM Rate-Scheduler MMW*/ +#define E1000_RTTDVMRM(_n) (0x3670 + ((_n) * 4)) +/* Tx BCN Rate-Scheduler MMW */ +#define E1000_RTTBCNRM(_n) (0x3690 + ((_n) * 4)) +#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select */ +#define E1000_RTTDVMRC 0x3608 /* Tx Desc Plane VM Rate-Scheduler Config */ +#define E1000_RTTDVMRS 0x360C /* Tx Desc Plane VM Rate-Scheduler Status */ +#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config */ +#define E1000_RTTBCNRS 0x36B4 /* Tx BCN Rate-Scheduler Status */ +#define E1000_RTTBCNCR 0xB200 /* Tx BCN Control Register */ +#define E1000_RTTBCNTG 0x35A4 /* Tx BCN Tagging */ +#define E1000_RTTBCNCP 0xB208 /* Tx BCN Congestion point */ +#define E1000_RTRBCNCR 0xB20C /* Rx BCN Control Register */ +#define E1000_RTTBCNRD 0x36B8 /* Tx BCN Rate Drift */ +#define E1000_PFCTOP 0x1080 /* Priority Flow Control Type and Opcode */ +#define E1000_RTTBCNIDX 0xB204 /* Tx BCN Congestion Point */ +#define E1000_RTTBCNACH 0x0B214 /* Tx BCN Control High */ +#define E1000_RTTBCNACL 0x0B210 /* Tx BCN Control Low */ + +/* DMA Coalescing registers */ +#define E1000_DMACR 0x02508 /* Control Register */ +#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */ +#define E1000_DMCTLX 0x02514 /* Time to Lx Request */ +#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */ +#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */ +#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */ +#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */ + +/* PCIe Parity Status Register */ +#define E1000_PCIEERRSTS 0x05BA8 + +#define E1000_PROXYS 0x5F64 /* Proxying Status */ +#define E1000_PROXYFC 0x5F60 /* Proxying Filter Control */ +/* Thermal sensor configuration and status registers */ +#define E1000_THMJT 0x08100 /* Junction Temperature */ +#define E1000_THLOWTC 0x08104 /* Low Threshold Control */ +#define E1000_THMIDTC 0x08108 /* Mid Threshold Control */ +#define E1000_THHIGHTC 0x0810C /* High Threshold Control */ +#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ + +/* Energy Efficient Ethernet "EEE" registers */ +#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */ +#define E1000_LTRC 0x01A0 /* Latency Tolerance Reporting Control */ +#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet "EEE"*/ +#define E1000_EEE_SU 0x0E34 /* EEE Setup */ +#define E1000_TLPIC 0x4148 /* EEE Tx LPI Count - TLPIC */ +#define E1000_RLPIC 0x414C /* EEE Rx LPI Count - RLPIC */ + +/* OS2BMC Registers */ +#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */ +#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */ +#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */ +#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */ + + + +#endif diff --git a/kernel/linux/kni/ethtool/igb/igb.h b/kernel/linux/kni/ethtool/igb/igb.h new file mode 100644 index 00000000..8aa2a308 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb.h @@ -0,0 +1,844 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* Linux PRO/1000 Ethernet Driver main header file */ + +#ifndef _IGB_H_ +#define _IGB_H_ + +#include <linux/kobject.h> + +#ifndef IGB_NO_LRO +#include <net/tcp.h> +#endif + +#undef HAVE_HW_TIME_STAMP +#ifdef HAVE_HW_TIME_STAMP +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/vmalloc.h> + +#endif +#ifdef SIOCETHTOOL +#include <linux/ethtool.h> +#endif + +struct igb_adapter; + +#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) +//#define IGB_DCA +#endif +#ifdef IGB_DCA +#include <linux/dca.h> +#endif + +#include "kcompat.h" + +#ifdef HAVE_SCTP +#include <linux/sctp.h> +#endif + +#include "e1000_api.h" +#include "e1000_82575.h" +#include "e1000_manage.h" +#include "e1000_mbx.h" + +#define IGB_ERR(args...) printk(KERN_ERR "igb: " args) + +#define PFX "igb: " +#define DPRINTK(nlevel, klevel, fmt, args...) \ + (void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \ + printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \ + __FUNCTION__ , ## args)) + +#ifdef HAVE_PTP_1588_CLOCK +#include <linux/clocksource.h> +#include <linux/net_tstamp.h> +#include <linux/ptp_clock_kernel.h> +#endif /* HAVE_PTP_1588_CLOCK */ + +#ifdef HAVE_I2C_SUPPORT +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#endif /* HAVE_I2C_SUPPORT */ + +/* Interrupt defines */ +#define IGB_START_ITR 648 /* ~6000 ints/sec */ +#define IGB_4K_ITR 980 +#define IGB_20K_ITR 196 +#define IGB_70K_ITR 56 + +/* Interrupt modes, as used by the IntMode parameter */ +#define IGB_INT_MODE_LEGACY 0 +#define IGB_INT_MODE_MSI 1 +#define IGB_INT_MODE_MSIX 2 + +/* TX/RX descriptor defines */ +#define IGB_DEFAULT_TXD 256 +#define IGB_DEFAULT_TX_WORK 128 +#define IGB_MIN_TXD 80 +#define IGB_MAX_TXD 4096 + +#define IGB_DEFAULT_RXD 256 +#define IGB_MIN_RXD 80 +#define IGB_MAX_RXD 4096 + +#define IGB_MIN_ITR_USECS 10 /* 100k irq/sec */ +#define IGB_MAX_ITR_USECS 8191 /* 120 irq/sec */ + +#define NON_Q_VECTORS 1 +#define MAX_Q_VECTORS 10 + +/* Transmit and receive queues */ +#define IGB_MAX_RX_QUEUES 16 +#define IGB_MAX_TX_QUEUES 16 + +#define IGB_MAX_VF_MC_ENTRIES 30 +#define IGB_MAX_VF_FUNCTIONS 8 +#define IGB_82576_VF_DEV_ID 0x10CA +#define IGB_I350_VF_DEV_ID 0x1520 +#define IGB_MAX_UTA_ENTRIES 128 +#define MAX_EMULATION_MAC_ADDRS 16 +#define OUI_LEN 3 +#define IGB_MAX_VMDQ_QUEUES 8 + + +struct vf_data_storage { + unsigned char vf_mac_addresses[ETH_ALEN]; + u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES]; + u16 num_vf_mc_hashes; + u16 default_vf_vlan_id; + u16 vlans_enabled; + unsigned char em_mac_addresses[MAX_EMULATION_MAC_ADDRS * ETH_ALEN]; + u32 uta_table_copy[IGB_MAX_UTA_ENTRIES]; + u32 flags; + unsigned long last_nack; +#ifdef IFLA_VF_MAX + u16 pf_vlan; /* When set, guest VLAN config not allowed. */ + u16 pf_qos; + u16 tx_rate; +#ifdef HAVE_VF_SPOOFCHK_CONFIGURE + bool spoofchk_enabled; +#endif +#endif +}; + +#define IGB_VF_FLAG_CTS 0x00000001 /* VF is clear to send data */ +#define IGB_VF_FLAG_UNI_PROMISC 0x00000002 /* VF has unicast promisc */ +#define IGB_VF_FLAG_MULTI_PROMISC 0x00000004 /* VF has multicast promisc */ +#define IGB_VF_FLAG_PF_SET_MAC 0x00000008 /* PF has set MAC address */ + +/* RX descriptor control thresholds. + * PTHRESH - MAC will consider prefetch if it has fewer than this number of + * descriptors available in its onboard memory. + * Setting this to 0 disables RX descriptor prefetch. + * HTHRESH - MAC will only prefetch if there are at least this many descriptors + * available in host memory. + * If PTHRESH is 0, this should also be 0. + * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back + * descriptors until either it has this many to write back, or the + * ITR timer expires. + */ +#define IGB_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : 8) +#define IGB_RX_HTHRESH 8 +#define IGB_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8) +#define IGB_TX_HTHRESH 1 +#define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \ + adapter->msix_entries) ? 1 : 4) + +/* this is the size past which hardware will drop packets when setting LPE=0 */ +#define MAXIMUM_ETHERNET_VLAN_SIZE 1522 + +/* NOTE: netdev_alloc_skb reserves 16 bytes, NET_IP_ALIGN means we + * reserve 2 more, and skb_shared_info adds an additional 384 more, + * this adds roughly 448 bytes of extra data meaning the smallest + * allocation we could have is 1K. + * i.e. RXBUFFER_512 --> size-1024 slab + */ +/* Supported Rx Buffer Sizes */ +#define IGB_RXBUFFER_256 256 +#define IGB_RXBUFFER_2048 2048 +#define IGB_RXBUFFER_16384 16384 +#define IGB_RX_HDR_LEN IGB_RXBUFFER_256 +#if MAX_SKB_FRAGS < 8 +#define IGB_RX_BUFSZ ALIGN(MAX_JUMBO_FRAME_SIZE / MAX_SKB_FRAGS, 1024) +#else +#define IGB_RX_BUFSZ IGB_RXBUFFER_2048 +#endif + + +/* Packet Buffer allocations */ +#define IGB_PBA_BYTES_SHIFT 0xA +#define IGB_TX_HEAD_ADDR_SHIFT 7 +#define IGB_PBA_TX_MASK 0xFFFF0000 + +#define IGB_FC_PAUSE_TIME 0x0680 /* 858 usec */ + +/* How many Rx Buffers do we bundle into one write to the hardware ? */ +#define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */ + +#define IGB_EEPROM_APME 0x0400 +#define AUTO_ALL_MODES 0 + +#ifndef IGB_MASTER_SLAVE +/* Switch to override PHY master/slave setting */ +#define IGB_MASTER_SLAVE e1000_ms_hw_default +#endif + +#define IGB_MNG_VLAN_NONE -1 + +#ifndef IGB_NO_LRO +#define IGB_LRO_MAX 32 /*Maximum number of LRO descriptors*/ +struct igb_lro_stats { + u32 flushed; + u32 coal; +}; + +/* + * igb_lro_header - header format to be aggregated by LRO + * @iph: IP header without options + * @tcp: TCP header + * @ts: Optional TCP timestamp data in TCP options + * + * This structure relies on the check above that verifies that the header + * is IPv4 and does not contain any options. + */ +struct igb_lrohdr { + struct iphdr iph; + struct tcphdr th; + __be32 ts[0]; +}; + +struct igb_lro_list { + struct sk_buff_head active; + struct igb_lro_stats stats; +}; + +#endif /* IGB_NO_LRO */ +struct igb_cb { +#ifndef IGB_NO_LRO +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + union { /* Union defining head/tail partner */ + struct sk_buff *head; + struct sk_buff *tail; + }; +#endif + __be32 tsecr; /* timestamp echo response */ + u32 tsval; /* timestamp value in host order */ + u32 next_seq; /* next expected sequence number */ + u16 free; /* 65521 minus total size */ + u16 mss; /* size of data portion of packet */ + u16 append_cnt; /* number of skb's appended */ +#endif /* IGB_NO_LRO */ +#ifdef HAVE_VLAN_RX_REGISTER + u16 vid; /* VLAN tag */ +#endif +}; +#define IGB_CB(skb) ((struct igb_cb *)(skb)->cb) + +enum igb_tx_flags { + /* cmd_type flags */ + IGB_TX_FLAGS_VLAN = 0x01, + IGB_TX_FLAGS_TSO = 0x02, + IGB_TX_FLAGS_TSTAMP = 0x04, + + /* olinfo flags */ + IGB_TX_FLAGS_IPV4 = 0x10, + IGB_TX_FLAGS_CSUM = 0x20, +}; + +/* VLAN info */ +#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000 +#define IGB_TX_FLAGS_VLAN_SHIFT 16 + +/* + * The largest size we can write to the descriptor is 65535. In order to + * maintain a power of two alignment we have to limit ourselves to 32K. + */ +#define IGB_MAX_TXD_PWR 15 +#define IGB_MAX_DATA_PER_TXD (1 << IGB_MAX_TXD_PWR) + +/* Tx Descriptors needed, worst case */ +#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IGB_MAX_DATA_PER_TXD) +#ifndef MAX_SKB_FRAGS +#define DESC_NEEDED 4 +#elif (MAX_SKB_FRAGS < 16) +#define DESC_NEEDED ((MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE)) + 4) +#else +#define DESC_NEEDED (MAX_SKB_FRAGS + 4) +#endif + +/* wrapper around a pointer to a socket buffer, + * so a DMA handle can be stored along with the buffer */ +struct igb_tx_buffer { + union e1000_adv_tx_desc *next_to_watch; + unsigned long time_stamp; + struct sk_buff *skb; + unsigned int bytecount; + u16 gso_segs; + __be16 protocol; + DEFINE_DMA_UNMAP_ADDR(dma); + DEFINE_DMA_UNMAP_LEN(len); + u32 tx_flags; +}; + +struct igb_rx_buffer { + dma_addr_t dma; +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + struct sk_buff *skb; +#else + struct page *page; + u32 page_offset; +#endif +}; + +struct igb_tx_queue_stats { + u64 packets; + u64 bytes; + u64 restart_queue; +}; + +struct igb_rx_queue_stats { + u64 packets; + u64 bytes; + u64 drops; + u64 csum_err; + u64 alloc_failed; + u64 ipv4_packets; /* IPv4 headers processed */ + u64 ipv4e_packets; /* IPv4E headers with extensions processed */ + u64 ipv6_packets; /* IPv6 headers processed */ + u64 ipv6e_packets; /* IPv6E headers with extensions processed */ + u64 tcp_packets; /* TCP headers processed */ + u64 udp_packets; /* UDP headers processed */ + u64 sctp_packets; /* SCTP headers processed */ + u64 nfs_packets; /* NFS headers processe */ +}; + +struct igb_ring_container { + struct igb_ring *ring; /* pointer to linked list of rings */ + unsigned int total_bytes; /* total bytes processed this int */ + unsigned int total_packets; /* total packets processed this int */ + u16 work_limit; /* total work allowed per interrupt */ + u8 count; /* total number of rings in vector */ + u8 itr; /* current ITR setting for ring */ +}; + +struct igb_ring { + struct igb_q_vector *q_vector; /* backlink to q_vector */ + struct net_device *netdev; /* back pointer to net_device */ + struct device *dev; /* device for dma mapping */ + union { /* array of buffer info structs */ + struct igb_tx_buffer *tx_buffer_info; + struct igb_rx_buffer *rx_buffer_info; + }; +#ifdef HAVE_PTP_1588_CLOCK + unsigned long last_rx_timestamp; +#endif /* HAVE_PTP_1588_CLOCK */ + void *desc; /* descriptor ring memory */ + unsigned long flags; /* ring specific flags */ + void __iomem *tail; /* pointer to ring tail register */ + dma_addr_t dma; /* phys address of the ring */ + unsigned int size; /* length of desc. ring in bytes */ + + u16 count; /* number of desc. in the ring */ + u8 queue_index; /* logical index of the ring*/ + u8 reg_idx; /* physical index of the ring */ + + /* everything past this point are written often */ + u16 next_to_clean; + u16 next_to_use; + u16 next_to_alloc; + + union { + /* TX */ + struct { + struct igb_tx_queue_stats tx_stats; + }; + /* RX */ + struct { + struct igb_rx_queue_stats rx_stats; +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + u16 rx_buffer_len; +#else + struct sk_buff *skb; +#endif + }; + }; +#ifdef CONFIG_IGB_VMDQ_NETDEV + struct net_device *vmdq_netdev; + int vqueue_index; /* queue index for virtual netdev */ +#endif +} ____cacheline_internodealigned_in_smp; + +struct igb_q_vector { + struct igb_adapter *adapter; /* backlink */ + int cpu; /* CPU for DCA */ + u32 eims_value; /* EIMS mask value */ + + u16 itr_val; + u8 set_itr; + void __iomem *itr_register; + + struct igb_ring_container rx, tx; + + struct napi_struct napi; +#ifndef IGB_NO_LRO + struct igb_lro_list lrolist; /* LRO list for queue vector*/ +#endif + char name[IFNAMSIZ + 9]; +#ifndef HAVE_NETDEV_NAPI_LIST + struct net_device poll_dev; +#endif + + /* for dynamic allocation of rings associated with this q_vector */ + struct igb_ring ring[0] ____cacheline_internodealigned_in_smp; +}; + +enum e1000_ring_flags_t { +#ifndef HAVE_NDO_SET_FEATURES + IGB_RING_FLAG_RX_CSUM, +#endif + IGB_RING_FLAG_RX_SCTP_CSUM, + IGB_RING_FLAG_RX_LB_VLAN_BSWAP, + IGB_RING_FLAG_TX_CTX_IDX, + IGB_RING_FLAG_TX_DETECT_HANG, +}; + +struct igb_mac_addr { + u8 addr[ETH_ALEN]; + u16 queue; + u16 state; /* bitmask */ +}; +#define IGB_MAC_STATE_DEFAULT 0x1 +#define IGB_MAC_STATE_MODIFIED 0x2 +#define IGB_MAC_STATE_IN_USE 0x4 + +#define IGB_TXD_DCMD (E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_RS) + +#define IGB_RX_DESC(R, i) \ + (&(((union e1000_adv_rx_desc *)((R)->desc))[i])) +#define IGB_TX_DESC(R, i) \ + (&(((union e1000_adv_tx_desc *)((R)->desc))[i])) +#define IGB_TX_CTXTDESC(R, i) \ + (&(((struct e1000_adv_tx_context_desc *)((R)->desc))[i])) + +#ifdef CONFIG_IGB_VMDQ_NETDEV +#define netdev_ring(ring) \ + ((ring->vmdq_netdev ? ring->vmdq_netdev : ring->netdev)) +#define ring_queue_index(ring) \ + ((ring->vmdq_netdev ? ring->vqueue_index : ring->queue_index)) +#else +#define netdev_ring(ring) (ring->netdev) +#define ring_queue_index(ring) (ring->queue_index) +#endif /* CONFIG_IGB_VMDQ_NETDEV */ + +/* igb_test_staterr - tests bits within Rx descriptor status and error fields */ +static inline __le32 igb_test_staterr(union e1000_adv_rx_desc *rx_desc, + const u32 stat_err_bits) +{ + return rx_desc->wb.upper.status_error & cpu_to_le32(stat_err_bits); +} + +/* igb_desc_unused - calculate if we have unused descriptors */ +static inline u16 igb_desc_unused(const struct igb_ring *ring) +{ + u16 ntc = ring->next_to_clean; + u16 ntu = ring->next_to_use; + + return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1; +} + +#ifdef CONFIG_BQL +static inline struct netdev_queue *txring_txq(const struct igb_ring *tx_ring) +{ + return netdev_get_tx_queue(tx_ring->netdev, tx_ring->queue_index); +} +#endif /* CONFIG_BQL */ + +// #ifdef EXT_THERMAL_SENSOR_SUPPORT +// #ifdef IGB_PROCFS +struct igb_therm_proc_data +{ + struct e1000_hw *hw; + struct e1000_thermal_diode_data *sensor_data; +}; + +// #endif /* IGB_PROCFS */ +// #endif /* EXT_THERMAL_SENSOR_SUPPORT */ + +#ifdef IGB_HWMON +#define IGB_HWMON_TYPE_LOC 0 +#define IGB_HWMON_TYPE_TEMP 1 +#define IGB_HWMON_TYPE_CAUTION 2 +#define IGB_HWMON_TYPE_MAX 3 + +struct hwmon_attr { + struct device_attribute dev_attr; + struct e1000_hw *hw; + struct e1000_thermal_diode_data *sensor; + char name[12]; + }; + +struct hwmon_buff { + struct device *device; + struct hwmon_attr *hwmon_list; + unsigned int n_hwmon; + }; +#endif /* IGB_HWMON */ + +/* board specific private data structure */ +struct igb_adapter { +#ifdef HAVE_VLAN_RX_REGISTER + /* vlgrp must be first member of structure */ + struct vlan_group *vlgrp; +#else + unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; +#endif + struct net_device *netdev; + + unsigned long state; + unsigned int flags; + + unsigned int num_q_vectors; + struct msix_entry *msix_entries; + + + /* TX */ + u16 tx_work_limit; + u32 tx_timeout_count; + int num_tx_queues; + struct igb_ring *tx_ring[IGB_MAX_TX_QUEUES]; + + /* RX */ + int num_rx_queues; + struct igb_ring *rx_ring[IGB_MAX_RX_QUEUES]; + + struct timer_list watchdog_timer; + struct timer_list dma_err_timer; + struct timer_list phy_info_timer; + u16 mng_vlan_id; + u32 bd_number; + u32 wol; + u32 en_mng_pt; + u16 link_speed; + u16 link_duplex; + u8 port_num; + + /* Interrupt Throttle Rate */ + u32 rx_itr_setting; + u32 tx_itr_setting; + + struct work_struct reset_task; + struct work_struct watchdog_task; + struct work_struct dma_err_task; + bool fc_autoneg; + u8 tx_timeout_factor; + +#ifdef DEBUG + bool tx_hang_detected; + bool disable_hw_reset; +#endif + u32 max_frame_size; + + /* OS defined structs */ + struct pci_dev *pdev; +#ifndef HAVE_NETDEV_STATS_IN_NETDEV + struct net_device_stats net_stats; +#endif +#ifndef IGB_NO_LRO + struct igb_lro_stats lro_stats; +#endif + + /* structs defined in e1000_hw.h */ + struct e1000_hw hw; + struct e1000_hw_stats stats; + struct e1000_phy_info phy_info; + struct e1000_phy_stats phy_stats; + +#ifdef ETHTOOL_TEST + u32 test_icr; + struct igb_ring test_tx_ring; + struct igb_ring test_rx_ring; +#endif + + int msg_enable; + + struct igb_q_vector *q_vector[MAX_Q_VECTORS]; + u32 eims_enable_mask; + u32 eims_other; + + /* to not mess up cache alignment, always add to the bottom */ + u32 *config_space; + u16 tx_ring_count; + u16 rx_ring_count; + struct vf_data_storage *vf_data; +#ifdef IFLA_VF_MAX + int vf_rate_link_speed; +#endif + u32 lli_port; + u32 lli_size; + unsigned int vfs_allocated_count; + /* Malicious Driver Detection flag. Valid only when SR-IOV is enabled */ + bool mdd; + int int_mode; + u32 rss_queues; + u32 vmdq_pools; + char fw_version[43]; + u32 wvbr; + struct igb_mac_addr *mac_table; +#ifdef CONFIG_IGB_VMDQ_NETDEV + struct net_device *vmdq_netdev[IGB_MAX_VMDQ_QUEUES]; +#endif + int vferr_refcount; + int dmac; + u32 *shadow_vfta; + + /* External Thermal Sensor support flag */ + bool ets; +#ifdef IGB_HWMON + struct hwmon_buff igb_hwmon_buff; +#else /* IGB_HWMON */ +#ifdef IGB_PROCFS + struct proc_dir_entry *eth_dir; + struct proc_dir_entry *info_dir; + struct proc_dir_entry *therm_dir[E1000_MAX_SENSORS]; + struct igb_therm_proc_data therm_data[E1000_MAX_SENSORS]; + bool old_lsc; +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ + u32 etrack_id; + +#ifdef HAVE_PTP_1588_CLOCK + struct ptp_clock *ptp_clock; + struct ptp_clock_info ptp_caps; + struct delayed_work ptp_overflow_work; + struct work_struct ptp_tx_work; + struct sk_buff *ptp_tx_skb; + unsigned long ptp_tx_start; + unsigned long last_rx_ptp_check; + spinlock_t tmreg_lock; + struct cyclecounter cc; + struct timecounter tc; + u32 tx_hwtstamp_timeouts; + u32 rx_hwtstamp_cleared; +#endif /* HAVE_PTP_1588_CLOCK */ + +#ifdef HAVE_I2C_SUPPORT + struct i2c_algo_bit_data i2c_algo; + struct i2c_adapter i2c_adap; + struct i2c_client *i2c_client; +#endif /* HAVE_I2C_SUPPORT */ + unsigned long link_check_timeout; + + + int devrc; + + int copper_tries; + u16 eee_advert; +}; + +#ifdef CONFIG_IGB_VMDQ_NETDEV +struct igb_vmdq_adapter { +#ifdef HAVE_VLAN_RX_REGISTER + /* vlgrp must be first member of structure */ + struct vlan_group *vlgrp; +#else + unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; +#endif + struct igb_adapter *real_adapter; + struct net_device *vnetdev; + struct net_device_stats net_stats; + struct igb_ring *tx_ring; + struct igb_ring *rx_ring; +}; +#endif + +#define IGB_FLAG_HAS_MSI (1 << 0) +#define IGB_FLAG_DCA_ENABLED (1 << 1) +#define IGB_FLAG_LLI_PUSH (1 << 2) +#define IGB_FLAG_QUAD_PORT_A (1 << 3) +#define IGB_FLAG_QUEUE_PAIRS (1 << 4) +#define IGB_FLAG_EEE (1 << 5) +#define IGB_FLAG_DMAC (1 << 6) +#define IGB_FLAG_DETECT_BAD_DMA (1 << 7) +#define IGB_FLAG_PTP (1 << 8) +#define IGB_FLAG_RSS_FIELD_IPV4_UDP (1 << 9) +#define IGB_FLAG_RSS_FIELD_IPV6_UDP (1 << 10) +#define IGB_FLAG_WOL_SUPPORTED (1 << 11) +#define IGB_FLAG_NEED_LINK_UPDATE (1 << 12) +#define IGB_FLAG_LOOPBACK_ENABLE (1 << 13) +#define IGB_FLAG_MEDIA_RESET (1 << 14) +#define IGB_FLAG_MAS_ENABLE (1 << 15) + +/* Media Auto Sense */ +#define IGB_MAS_ENABLE_0 0X0001 +#define IGB_MAS_ENABLE_1 0X0002 +#define IGB_MAS_ENABLE_2 0X0004 +#define IGB_MAS_ENABLE_3 0X0008 + +#define IGB_MIN_TXPBSIZE 20408 +#define IGB_TX_BUF_4096 4096 + +#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coal Flush */ + +/* DMA Coalescing defines */ +#define IGB_DMAC_DISABLE 0 +#define IGB_DMAC_MIN 250 +#define IGB_DMAC_500 500 +#define IGB_DMAC_EN_DEFAULT 1000 +#define IGB_DMAC_2000 2000 +#define IGB_DMAC_3000 3000 +#define IGB_DMAC_4000 4000 +#define IGB_DMAC_5000 5000 +#define IGB_DMAC_6000 6000 +#define IGB_DMAC_7000 7000 +#define IGB_DMAC_8000 8000 +#define IGB_DMAC_9000 9000 +#define IGB_DMAC_MAX 10000 + +#define IGB_82576_TSYNC_SHIFT 19 +#define IGB_82580_TSYNC_SHIFT 24 +#define IGB_TS_HDR_LEN 16 + +/* CEM Support */ +#define FW_HDR_LEN 0x4 +#define FW_CMD_DRV_INFO 0xDD +#define FW_CMD_DRV_INFO_LEN 0x5 +#define FW_CMD_RESERVED 0X0 +#define FW_RESP_SUCCESS 0x1 +#define FW_UNUSED_VER 0x0 +#define FW_MAX_RETRIES 3 +#define FW_STATUS_SUCCESS 0x1 +#define FW_FAMILY_DRV_VER 0Xffffffff + +#define IGB_MAX_LINK_TRIES 20 + +struct e1000_fw_hdr { + u8 cmd; + u8 buf_len; + union + { + u8 cmd_resv; + u8 ret_status; + } cmd_or_resp; + u8 checksum; +}; + +#pragma pack(push,1) +struct e1000_fw_drv_info { + struct e1000_fw_hdr hdr; + u8 port_num; + u32 drv_version; + u16 pad; /* end spacing to ensure length is mult. of dword */ + u8 pad2; /* end spacing to ensure length is mult. of dword2 */ +}; +#pragma pack(pop) + +enum e1000_state_t { + __IGB_TESTING, + __IGB_RESETTING, + __IGB_DOWN +}; + +extern char igb_driver_name[]; +extern char igb_driver_version[]; + +extern int igb_up(struct igb_adapter *); +extern void igb_down(struct igb_adapter *); +extern void igb_reinit_locked(struct igb_adapter *); +extern void igb_reset(struct igb_adapter *); +extern int igb_set_spd_dplx(struct igb_adapter *, u16); +extern int igb_setup_tx_resources(struct igb_ring *); +extern int igb_setup_rx_resources(struct igb_ring *); +extern void igb_free_tx_resources(struct igb_ring *); +extern void igb_free_rx_resources(struct igb_ring *); +extern void igb_configure_tx_ring(struct igb_adapter *, struct igb_ring *); +extern void igb_configure_rx_ring(struct igb_adapter *, struct igb_ring *); +extern void igb_setup_tctl(struct igb_adapter *); +extern void igb_setup_rctl(struct igb_adapter *); +extern netdev_tx_t igb_xmit_frame_ring(struct sk_buff *, struct igb_ring *); +extern void igb_unmap_and_free_tx_resource(struct igb_ring *, + struct igb_tx_buffer *); +extern void igb_alloc_rx_buffers(struct igb_ring *, u16); +extern void igb_clean_rx_ring(struct igb_ring *); +extern void igb_update_stats(struct igb_adapter *); +extern bool igb_has_link(struct igb_adapter *adapter); +extern void igb_set_ethtool_ops(struct net_device *); +extern void igb_check_options(struct igb_adapter *); +extern void igb_power_up_link(struct igb_adapter *); +#ifdef HAVE_PTP_1588_CLOCK +extern void igb_ptp_init(struct igb_adapter *adapter); +extern void igb_ptp_stop(struct igb_adapter *adapter); +extern void igb_ptp_reset(struct igb_adapter *adapter); +extern void igb_ptp_tx_work(struct work_struct *work); +extern void igb_ptp_rx_hang(struct igb_adapter *adapter); +extern void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter); +extern void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, + struct sk_buff *skb); +extern void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, + unsigned char *va, + struct sk_buff *skb); +static inline void igb_ptp_rx_hwtstamp(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + igb_ptp_rx_pktstamp(rx_ring->q_vector, skb->data, skb); + skb_pull(skb, IGB_TS_HDR_LEN); +#endif + return; + } + + if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TS)) + igb_ptp_rx_rgtstamp(rx_ring->q_vector, skb); + + /* Update the last_rx_timestamp timer in order to enable watchdog check + * for error case of latched timestamp on a dropped packet. + */ + rx_ring->last_rx_timestamp = jiffies; +} + +extern int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, + struct ifreq *ifr, int cmd); +#endif /* HAVE_PTP_1588_CLOCK */ +#ifdef ETHTOOL_OPS_COMPAT +extern int ethtool_ioctl(struct ifreq *); +#endif +extern int igb_write_mc_addr_list(struct net_device *netdev); +extern int igb_add_mac_filter(struct igb_adapter *adapter, u8 *addr, u16 queue); +extern int igb_del_mac_filter(struct igb_adapter *adapter, u8* addr, u16 queue); +extern int igb_available_rars(struct igb_adapter *adapter); +extern s32 igb_vlvf_set(struct igb_adapter *, u32, bool, u32); +extern void igb_configure_vt_default_pool(struct igb_adapter *adapter); +extern void igb_enable_vlan_tags(struct igb_adapter *adapter); +#ifndef HAVE_VLAN_RX_REGISTER +extern void igb_vlan_mode(struct net_device *, u32); +#endif + +#define E1000_PCS_CFG_IGN_SD 1 + +#ifdef IGB_HWMON +void igb_sysfs_exit(struct igb_adapter *adapter); +int igb_sysfs_init(struct igb_adapter *adapter); +#else +#ifdef IGB_PROCFS +int igb_procfs_init(struct igb_adapter* adapter); +void igb_procfs_exit(struct igb_adapter* adapter); +int igb_procfs_topdir_init(void); +void igb_procfs_topdir_exit(void); +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ + + + +#endif /* _IGB_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/igb_ethtool.c b/kernel/linux/kni/ethtool/igb/igb_ethtool.c new file mode 100644 index 00000000..002f75c4 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb_ethtool.c @@ -0,0 +1,2843 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ethtool support for igb */ + +#include <linux/netdevice.h> +#include <linux/vmalloc.h> + +#ifdef SIOCETHTOOL +#include <linux/ethtool.h> +#ifdef CONFIG_PM_RUNTIME +#include <linux/pm_runtime.h> +#endif /* CONFIG_PM_RUNTIME */ +#include <linux/highmem.h> + +#include "igb.h" +#include "igb_regtest.h" +#include <linux/if_vlan.h> +#ifdef ETHTOOL_GEEE +#include <linux/mdio.h> +#endif + +#ifdef ETHTOOL_OPS_COMPAT +#include "kcompat_ethtool.c" +#endif +#ifdef ETHTOOL_GSTATS +struct igb_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define IGB_STAT(_name, _stat) { \ + .stat_string = _name, \ + .sizeof_stat = FIELD_SIZEOF(struct igb_adapter, _stat), \ + .stat_offset = offsetof(struct igb_adapter, _stat) \ +} +static const struct igb_stats igb_gstrings_stats[] = { + IGB_STAT("rx_packets", stats.gprc), + IGB_STAT("tx_packets", stats.gptc), + IGB_STAT("rx_bytes", stats.gorc), + IGB_STAT("tx_bytes", stats.gotc), + IGB_STAT("rx_broadcast", stats.bprc), + IGB_STAT("tx_broadcast", stats.bptc), + IGB_STAT("rx_multicast", stats.mprc), + IGB_STAT("tx_multicast", stats.mptc), + IGB_STAT("multicast", stats.mprc), + IGB_STAT("collisions", stats.colc), + IGB_STAT("rx_crc_errors", stats.crcerrs), + IGB_STAT("rx_no_buffer_count", stats.rnbc), + IGB_STAT("rx_missed_errors", stats.mpc), + IGB_STAT("tx_aborted_errors", stats.ecol), + IGB_STAT("tx_carrier_errors", stats.tncrs), + IGB_STAT("tx_window_errors", stats.latecol), + IGB_STAT("tx_abort_late_coll", stats.latecol), + IGB_STAT("tx_deferred_ok", stats.dc), + IGB_STAT("tx_single_coll_ok", stats.scc), + IGB_STAT("tx_multi_coll_ok", stats.mcc), + IGB_STAT("tx_timeout_count", tx_timeout_count), + IGB_STAT("rx_long_length_errors", stats.roc), + IGB_STAT("rx_short_length_errors", stats.ruc), + IGB_STAT("rx_align_errors", stats.algnerrc), + IGB_STAT("tx_tcp_seg_good", stats.tsctc), + IGB_STAT("tx_tcp_seg_failed", stats.tsctfc), + IGB_STAT("rx_flow_control_xon", stats.xonrxc), + IGB_STAT("rx_flow_control_xoff", stats.xoffrxc), + IGB_STAT("tx_flow_control_xon", stats.xontxc), + IGB_STAT("tx_flow_control_xoff", stats.xofftxc), + IGB_STAT("rx_long_byte_count", stats.gorc), + IGB_STAT("tx_dma_out_of_sync", stats.doosync), +#ifndef IGB_NO_LRO + IGB_STAT("lro_aggregated", lro_stats.coal), + IGB_STAT("lro_flushed", lro_stats.flushed), +#endif /* IGB_LRO */ + IGB_STAT("tx_smbus", stats.mgptc), + IGB_STAT("rx_smbus", stats.mgprc), + IGB_STAT("dropped_smbus", stats.mgpdc), + IGB_STAT("os2bmc_rx_by_bmc", stats.o2bgptc), + IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc), + IGB_STAT("os2bmc_tx_by_host", stats.o2bspc), + IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc), +#ifdef HAVE_PTP_1588_CLOCK + IGB_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts), + IGB_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared), +#endif /* HAVE_PTP_1588_CLOCK */ +}; + +#define IGB_NETDEV_STAT(_net_stat) { \ + .stat_string = #_net_stat, \ + .sizeof_stat = FIELD_SIZEOF(struct net_device_stats, _net_stat), \ + .stat_offset = offsetof(struct net_device_stats, _net_stat) \ +} +static const struct igb_stats igb_gstrings_net_stats[] = { + IGB_NETDEV_STAT(rx_errors), + IGB_NETDEV_STAT(tx_errors), + IGB_NETDEV_STAT(tx_dropped), + IGB_NETDEV_STAT(rx_length_errors), + IGB_NETDEV_STAT(rx_over_errors), + IGB_NETDEV_STAT(rx_frame_errors), + IGB_NETDEV_STAT(rx_fifo_errors), + IGB_NETDEV_STAT(tx_fifo_errors), + IGB_NETDEV_STAT(tx_heartbeat_errors) +}; + +#define IGB_GLOBAL_STATS_LEN ARRAY_SIZE(igb_gstrings_stats) +#define IGB_NETDEV_STATS_LEN ARRAY_SIZE(igb_gstrings_net_stats) +#define IGB_RX_QUEUE_STATS_LEN \ + (sizeof(struct igb_rx_queue_stats) / sizeof(u64)) +#define IGB_TX_QUEUE_STATS_LEN \ + (sizeof(struct igb_tx_queue_stats) / sizeof(u64)) +#define IGB_QUEUE_STATS_LEN \ + ((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues * \ + IGB_RX_QUEUE_STATS_LEN) + \ + (((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues * \ + IGB_TX_QUEUE_STATS_LEN)) +#define IGB_STATS_LEN \ + (IGB_GLOBAL_STATS_LEN + IGB_NETDEV_STATS_LEN + IGB_QUEUE_STATS_LEN) + +#endif /* ETHTOOL_GSTATS */ +#ifdef ETHTOOL_TEST +static const char igb_gstrings_test[][ETH_GSTRING_LEN] = { + "Register test (offline)", "Eeprom test (offline)", + "Interrupt test (offline)", "Loopback test (offline)", + "Link test (on/offline)" +}; +#define IGB_TEST_LEN (sizeof(igb_gstrings_test) / ETH_GSTRING_LEN) +#endif /* ETHTOOL_TEST */ + +static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 status; + + if (hw->phy.media_type == e1000_media_type_copper) { + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full| + SUPPORTED_Autoneg | + SUPPORTED_TP | + SUPPORTED_Pause); + ecmd->advertising = ADVERTISED_TP; + + if (hw->mac.autoneg == 1) { + ecmd->advertising |= ADVERTISED_Autoneg; + /* the e1000 autoneg seems to match ethtool nicely */ + ecmd->advertising |= hw->phy.autoneg_advertised; + } + + ecmd->port = PORT_TP; + ecmd->phy_address = hw->phy.addr; + ecmd->transceiver = XCVR_INTERNAL; + + } else { + ecmd->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_100baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause); + if (hw->mac.type == e1000_i354) + ecmd->supported |= (SUPPORTED_2500baseX_Full); + + ecmd->advertising = ADVERTISED_FIBRE; + + switch (adapter->link_speed) { + case SPEED_2500: + ecmd->advertising = ADVERTISED_2500baseX_Full; + break; + case SPEED_1000: + ecmd->advertising = ADVERTISED_1000baseT_Full; + break; + case SPEED_100: + ecmd->advertising = ADVERTISED_100baseT_Full; + break; + default: + break; + } + + if (hw->mac.autoneg == 1) + ecmd->advertising |= ADVERTISED_Autoneg; + + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; + } + + if (hw->mac.autoneg != 1) + ecmd->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + + if (hw->fc.requested_mode == e1000_fc_full) + ecmd->advertising |= ADVERTISED_Pause; + else if (hw->fc.requested_mode == e1000_fc_rx_pause) + ecmd->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + else if (hw->fc.requested_mode == e1000_fc_tx_pause) + ecmd->advertising |= ADVERTISED_Asym_Pause; + else + ecmd->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + + status = E1000_READ_REG(hw, E1000_STATUS); + + if (status & E1000_STATUS_LU) { + if ((hw->mac.type == e1000_i354) && + (status & E1000_STATUS_2P5_SKU) && + !(status & E1000_STATUS_2P5_SKU_OVER)) + ecmd->speed = SPEED_2500; + else if (status & E1000_STATUS_SPEED_1000) + ecmd->speed = SPEED_1000; + else if (status & E1000_STATUS_SPEED_100) + ecmd->speed = SPEED_100; + else + ecmd->speed = SPEED_10; + + if ((status & E1000_STATUS_FD) || + hw->phy.media_type != e1000_media_type_copper) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + if ((hw->phy.media_type == e1000_media_type_fiber) || + hw->mac.autoneg) + ecmd->autoneg = AUTONEG_ENABLE; + else + ecmd->autoneg = AUTONEG_DISABLE; +#ifdef ETH_TP_MDI_X + + /* MDI-X => 2; MDI =>1; Invalid =>0 */ + if (hw->phy.media_type == e1000_media_type_copper) + ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X : + ETH_TP_MDI; + else + ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; + +#ifdef ETH_TP_MDI_AUTO + if (hw->phy.mdix == AUTO_ALL_MODES) + ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO; + else + ecmd->eth_tp_mdix_ctrl = hw->phy.mdix; + +#endif +#endif /* ETH_TP_MDI_X */ + return 0; +} + +static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if (ecmd->duplex == DUPLEX_HALF) { + if (!hw->dev_spec._82575.eee_disable) + dev_info(pci_dev_to_dev(adapter->pdev), "EEE disabled: not supported with half duplex\n"); + hw->dev_spec._82575.eee_disable = true; + } else { + if (hw->dev_spec._82575.eee_disable) + dev_info(pci_dev_to_dev(adapter->pdev), "EEE enabled\n"); + hw->dev_spec._82575.eee_disable = false; + } + + /* When SoL/IDER sessions are active, autoneg/speed/duplex + * cannot be changed */ + if (e1000_check_reset_block(hw)) { + dev_err(pci_dev_to_dev(adapter->pdev), "Cannot change link " + "characteristics when SoL/IDER is active.\n"); + return -EINVAL; + } + +#ifdef ETH_TP_MDI_AUTO + /* + * MDI setting is only allowed when autoneg enabled because + * some hardware doesn't allow MDI setting when speed or + * duplex is forced. + */ + if (ecmd->eth_tp_mdix_ctrl) { + if (hw->phy.media_type != e1000_media_type_copper) + return -EOPNOTSUPP; + + if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) && + (ecmd->autoneg != AUTONEG_ENABLE)) { + dev_err(&adapter->pdev->dev, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n"); + return -EINVAL; + } + } + +#endif /* ETH_TP_MDI_AUTO */ + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + + if (ecmd->autoneg == AUTONEG_ENABLE) { + hw->mac.autoneg = 1; + if (hw->phy.media_type == e1000_media_type_fiber) { + hw->phy.autoneg_advertised = ecmd->advertising | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg; + switch (adapter->link_speed) { + case SPEED_2500: + hw->phy.autoneg_advertised = + ADVERTISED_2500baseX_Full; + break; + case SPEED_1000: + hw->phy.autoneg_advertised = + ADVERTISED_1000baseT_Full; + break; + case SPEED_100: + hw->phy.autoneg_advertised = + ADVERTISED_100baseT_Full; + break; + default: + break; + } + } else { + hw->phy.autoneg_advertised = ecmd->advertising | + ADVERTISED_TP | + ADVERTISED_Autoneg; + } + ecmd->advertising = hw->phy.autoneg_advertised; + if (adapter->fc_autoneg) + hw->fc.requested_mode = e1000_fc_default; + } else { + if (igb_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { + clear_bit(__IGB_RESETTING, &adapter->state); + return -EINVAL; + } + } + +#ifdef ETH_TP_MDI_AUTO + /* MDI-X => 2; MDI => 1; Auto => 3 */ + if (ecmd->eth_tp_mdix_ctrl) { + /* fix up the value for auto (3 => 0) as zero is mapped + * internally to auto + */ + if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO) + hw->phy.mdix = AUTO_ALL_MODES; + else + hw->phy.mdix = ecmd->eth_tp_mdix_ctrl; + } + +#endif /* ETH_TP_MDI_AUTO */ + /* reset the link */ + if (netif_running(adapter->netdev)) { + igb_down(adapter); + igb_up(adapter); + } else + igb_reset(adapter); + + clear_bit(__IGB_RESETTING, &adapter->state); + return 0; +} + +static u32 igb_get_link(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_mac_info *mac = &adapter->hw.mac; + + /* + * If the link is not reported up to netdev, interrupts are disabled, + * and so the physical link state may have changed since we last + * looked. Set get_link_status to make sure that the true link + * state is interrogated, rather than pulling a cached and possibly + * stale link state from the driver. + */ + if (!netif_carrier_ok(netdev)) + mac->get_link_status = 1; + + return igb_has_link(adapter); +} + +static void igb_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + pause->autoneg = + (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); + + if (hw->fc.current_mode == e1000_fc_rx_pause) + pause->rx_pause = 1; + else if (hw->fc.current_mode == e1000_fc_tx_pause) + pause->tx_pause = 1; + else if (hw->fc.current_mode == e1000_fc_full) { + pause->rx_pause = 1; + pause->tx_pause = 1; + } +} + +static int igb_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + int retval = 0; + + adapter->fc_autoneg = pause->autoneg; + + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + + if (adapter->fc_autoneg == AUTONEG_ENABLE) { + hw->fc.requested_mode = e1000_fc_default; + if (netif_running(adapter->netdev)) { + igb_down(adapter); + igb_up(adapter); + } else { + igb_reset(adapter); + } + } else { + if (pause->rx_pause && pause->tx_pause) + hw->fc.requested_mode = e1000_fc_full; + else if (pause->rx_pause && !pause->tx_pause) + hw->fc.requested_mode = e1000_fc_rx_pause; + else if (!pause->rx_pause && pause->tx_pause) + hw->fc.requested_mode = e1000_fc_tx_pause; + else if (!pause->rx_pause && !pause->tx_pause) + hw->fc.requested_mode = e1000_fc_none; + + hw->fc.current_mode = hw->fc.requested_mode; + + if (hw->phy.media_type == e1000_media_type_fiber) { + retval = hw->mac.ops.setup_link(hw); + /* implicit goto out */ + } else { + retval = e1000_force_mac_fc(hw); + if (retval) + goto out; + e1000_set_fc_watermarks_generic(hw); + } + } + +out: + clear_bit(__IGB_RESETTING, &adapter->state); + return retval; +} + +static u32 igb_get_msglevel(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void igb_set_msglevel(struct net_device *netdev, u32 data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = data; +} + +static int igb_get_regs_len(struct net_device *netdev) +{ +#define IGB_REGS_LEN 555 + return IGB_REGS_LEN * sizeof(u32); +} + +static void igb_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u8 i; + + memset(p, 0, IGB_REGS_LEN * sizeof(u32)); + + regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id; + + /* General Registers */ + regs_buff[0] = E1000_READ_REG(hw, E1000_CTRL); + regs_buff[1] = E1000_READ_REG(hw, E1000_STATUS); + regs_buff[2] = E1000_READ_REG(hw, E1000_CTRL_EXT); + regs_buff[3] = E1000_READ_REG(hw, E1000_MDIC); + regs_buff[4] = E1000_READ_REG(hw, E1000_SCTL); + regs_buff[5] = E1000_READ_REG(hw, E1000_CONNSW); + regs_buff[6] = E1000_READ_REG(hw, E1000_VET); + regs_buff[7] = E1000_READ_REG(hw, E1000_LEDCTL); + regs_buff[8] = E1000_READ_REG(hw, E1000_PBA); + regs_buff[9] = E1000_READ_REG(hw, E1000_PBS); + regs_buff[10] = E1000_READ_REG(hw, E1000_FRTIMER); + regs_buff[11] = E1000_READ_REG(hw, E1000_TCPTIMER); + + /* NVM Register */ + regs_buff[12] = E1000_READ_REG(hw, E1000_EECD); + + /* Interrupt */ + /* Reading EICS for EICR because they read the + * same but EICS does not clear on read */ + regs_buff[13] = E1000_READ_REG(hw, E1000_EICS); + regs_buff[14] = E1000_READ_REG(hw, E1000_EICS); + regs_buff[15] = E1000_READ_REG(hw, E1000_EIMS); + regs_buff[16] = E1000_READ_REG(hw, E1000_EIMC); + regs_buff[17] = E1000_READ_REG(hw, E1000_EIAC); + regs_buff[18] = E1000_READ_REG(hw, E1000_EIAM); + /* Reading ICS for ICR because they read the + * same but ICS does not clear on read */ + regs_buff[19] = E1000_READ_REG(hw, E1000_ICS); + regs_buff[20] = E1000_READ_REG(hw, E1000_ICS); + regs_buff[21] = E1000_READ_REG(hw, E1000_IMS); + regs_buff[22] = E1000_READ_REG(hw, E1000_IMC); + regs_buff[23] = E1000_READ_REG(hw, E1000_IAC); + regs_buff[24] = E1000_READ_REG(hw, E1000_IAM); + regs_buff[25] = E1000_READ_REG(hw, E1000_IMIRVP); + + /* Flow Control */ + regs_buff[26] = E1000_READ_REG(hw, E1000_FCAL); + regs_buff[27] = E1000_READ_REG(hw, E1000_FCAH); + regs_buff[28] = E1000_READ_REG(hw, E1000_FCTTV); + regs_buff[29] = E1000_READ_REG(hw, E1000_FCRTL); + regs_buff[30] = E1000_READ_REG(hw, E1000_FCRTH); + regs_buff[31] = E1000_READ_REG(hw, E1000_FCRTV); + + /* Receive */ + regs_buff[32] = E1000_READ_REG(hw, E1000_RCTL); + regs_buff[33] = E1000_READ_REG(hw, E1000_RXCSUM); + regs_buff[34] = E1000_READ_REG(hw, E1000_RLPML); + regs_buff[35] = E1000_READ_REG(hw, E1000_RFCTL); + regs_buff[36] = E1000_READ_REG(hw, E1000_MRQC); + regs_buff[37] = E1000_READ_REG(hw, E1000_VT_CTL); + + /* Transmit */ + regs_buff[38] = E1000_READ_REG(hw, E1000_TCTL); + regs_buff[39] = E1000_READ_REG(hw, E1000_TCTL_EXT); + regs_buff[40] = E1000_READ_REG(hw, E1000_TIPG); + regs_buff[41] = E1000_READ_REG(hw, E1000_DTXCTL); + + /* Wake Up */ + regs_buff[42] = E1000_READ_REG(hw, E1000_WUC); + regs_buff[43] = E1000_READ_REG(hw, E1000_WUFC); + regs_buff[44] = E1000_READ_REG(hw, E1000_WUS); + regs_buff[45] = E1000_READ_REG(hw, E1000_IPAV); + regs_buff[46] = E1000_READ_REG(hw, E1000_WUPL); + + /* MAC */ + regs_buff[47] = E1000_READ_REG(hw, E1000_PCS_CFG0); + regs_buff[48] = E1000_READ_REG(hw, E1000_PCS_LCTL); + regs_buff[49] = E1000_READ_REG(hw, E1000_PCS_LSTAT); + regs_buff[50] = E1000_READ_REG(hw, E1000_PCS_ANADV); + regs_buff[51] = E1000_READ_REG(hw, E1000_PCS_LPAB); + regs_buff[52] = E1000_READ_REG(hw, E1000_PCS_NPTX); + regs_buff[53] = E1000_READ_REG(hw, E1000_PCS_LPABNP); + + /* Statistics */ + regs_buff[54] = adapter->stats.crcerrs; + regs_buff[55] = adapter->stats.algnerrc; + regs_buff[56] = adapter->stats.symerrs; + regs_buff[57] = adapter->stats.rxerrc; + regs_buff[58] = adapter->stats.mpc; + regs_buff[59] = adapter->stats.scc; + regs_buff[60] = adapter->stats.ecol; + regs_buff[61] = adapter->stats.mcc; + regs_buff[62] = adapter->stats.latecol; + regs_buff[63] = adapter->stats.colc; + regs_buff[64] = adapter->stats.dc; + regs_buff[65] = adapter->stats.tncrs; + regs_buff[66] = adapter->stats.sec; + regs_buff[67] = adapter->stats.htdpmc; + regs_buff[68] = adapter->stats.rlec; + regs_buff[69] = adapter->stats.xonrxc; + regs_buff[70] = adapter->stats.xontxc; + regs_buff[71] = adapter->stats.xoffrxc; + regs_buff[72] = adapter->stats.xofftxc; + regs_buff[73] = adapter->stats.fcruc; + regs_buff[74] = adapter->stats.prc64; + regs_buff[75] = adapter->stats.prc127; + regs_buff[76] = adapter->stats.prc255; + regs_buff[77] = adapter->stats.prc511; + regs_buff[78] = adapter->stats.prc1023; + regs_buff[79] = adapter->stats.prc1522; + regs_buff[80] = adapter->stats.gprc; + regs_buff[81] = adapter->stats.bprc; + regs_buff[82] = adapter->stats.mprc; + regs_buff[83] = adapter->stats.gptc; + regs_buff[84] = adapter->stats.gorc; + regs_buff[86] = adapter->stats.gotc; + regs_buff[88] = adapter->stats.rnbc; + regs_buff[89] = adapter->stats.ruc; + regs_buff[90] = adapter->stats.rfc; + regs_buff[91] = adapter->stats.roc; + regs_buff[92] = adapter->stats.rjc; + regs_buff[93] = adapter->stats.mgprc; + regs_buff[94] = adapter->stats.mgpdc; + regs_buff[95] = adapter->stats.mgptc; + regs_buff[96] = adapter->stats.tor; + regs_buff[98] = adapter->stats.tot; + regs_buff[100] = adapter->stats.tpr; + regs_buff[101] = adapter->stats.tpt; + regs_buff[102] = adapter->stats.ptc64; + regs_buff[103] = adapter->stats.ptc127; + regs_buff[104] = adapter->stats.ptc255; + regs_buff[105] = adapter->stats.ptc511; + regs_buff[106] = adapter->stats.ptc1023; + regs_buff[107] = adapter->stats.ptc1522; + regs_buff[108] = adapter->stats.mptc; + regs_buff[109] = adapter->stats.bptc; + regs_buff[110] = adapter->stats.tsctc; + regs_buff[111] = adapter->stats.iac; + regs_buff[112] = adapter->stats.rpthc; + regs_buff[113] = adapter->stats.hgptc; + regs_buff[114] = adapter->stats.hgorc; + regs_buff[116] = adapter->stats.hgotc; + regs_buff[118] = adapter->stats.lenerrs; + regs_buff[119] = adapter->stats.scvpc; + regs_buff[120] = adapter->stats.hrmpc; + + for (i = 0; i < 4; i++) + regs_buff[121 + i] = E1000_READ_REG(hw, E1000_SRRCTL(i)); + for (i = 0; i < 4; i++) + regs_buff[125 + i] = E1000_READ_REG(hw, E1000_PSRTYPE(i)); + for (i = 0; i < 4; i++) + regs_buff[129 + i] = E1000_READ_REG(hw, E1000_RDBAL(i)); + for (i = 0; i < 4; i++) + regs_buff[133 + i] = E1000_READ_REG(hw, E1000_RDBAH(i)); + for (i = 0; i < 4; i++) + regs_buff[137 + i] = E1000_READ_REG(hw, E1000_RDLEN(i)); + for (i = 0; i < 4; i++) + regs_buff[141 + i] = E1000_READ_REG(hw, E1000_RDH(i)); + for (i = 0; i < 4; i++) + regs_buff[145 + i] = E1000_READ_REG(hw, E1000_RDT(i)); + for (i = 0; i < 4; i++) + regs_buff[149 + i] = E1000_READ_REG(hw, E1000_RXDCTL(i)); + + for (i = 0; i < 10; i++) + regs_buff[153 + i] = E1000_READ_REG(hw, E1000_EITR(i)); + for (i = 0; i < 8; i++) + regs_buff[163 + i] = E1000_READ_REG(hw, E1000_IMIR(i)); + for (i = 0; i < 8; i++) + regs_buff[171 + i] = E1000_READ_REG(hw, E1000_IMIREXT(i)); + for (i = 0; i < 16; i++) + regs_buff[179 + i] = E1000_READ_REG(hw, E1000_RAL(i)); + for (i = 0; i < 16; i++) + regs_buff[195 + i] = E1000_READ_REG(hw, E1000_RAH(i)); + + for (i = 0; i < 4; i++) + regs_buff[211 + i] = E1000_READ_REG(hw, E1000_TDBAL(i)); + for (i = 0; i < 4; i++) + regs_buff[215 + i] = E1000_READ_REG(hw, E1000_TDBAH(i)); + for (i = 0; i < 4; i++) + regs_buff[219 + i] = E1000_READ_REG(hw, E1000_TDLEN(i)); + for (i = 0; i < 4; i++) + regs_buff[223 + i] = E1000_READ_REG(hw, E1000_TDH(i)); + for (i = 0; i < 4; i++) + regs_buff[227 + i] = E1000_READ_REG(hw, E1000_TDT(i)); + for (i = 0; i < 4; i++) + regs_buff[231 + i] = E1000_READ_REG(hw, E1000_TXDCTL(i)); + for (i = 0; i < 4; i++) + regs_buff[235 + i] = E1000_READ_REG(hw, E1000_TDWBAL(i)); + for (i = 0; i < 4; i++) + regs_buff[239 + i] = E1000_READ_REG(hw, E1000_TDWBAH(i)); + for (i = 0; i < 4; i++) + regs_buff[243 + i] = E1000_READ_REG(hw, E1000_DCA_TXCTRL(i)); + + for (i = 0; i < 4; i++) + regs_buff[247 + i] = E1000_READ_REG(hw, E1000_IP4AT_REG(i)); + for (i = 0; i < 4; i++) + regs_buff[251 + i] = E1000_READ_REG(hw, E1000_IP6AT_REG(i)); + for (i = 0; i < 32; i++) + regs_buff[255 + i] = E1000_READ_REG(hw, E1000_WUPM_REG(i)); + for (i = 0; i < 128; i++) + regs_buff[287 + i] = E1000_READ_REG(hw, E1000_FFMT_REG(i)); + for (i = 0; i < 128; i++) + regs_buff[415 + i] = E1000_READ_REG(hw, E1000_FFVT_REG(i)); + for (i = 0; i < 4; i++) + regs_buff[543 + i] = E1000_READ_REG(hw, E1000_FFLT_REG(i)); + + regs_buff[547] = E1000_READ_REG(hw, E1000_TDFH); + regs_buff[548] = E1000_READ_REG(hw, E1000_TDFT); + regs_buff[549] = E1000_READ_REG(hw, E1000_TDFHS); + regs_buff[550] = E1000_READ_REG(hw, E1000_TDFPC); + if (hw->mac.type > e1000_82580) { + regs_buff[551] = adapter->stats.o2bgptc; + regs_buff[552] = adapter->stats.b2ospc; + regs_buff[553] = adapter->stats.o2bspc; + regs_buff[554] = adapter->stats.b2ogprc; + } +} + +static int igb_get_eeprom_len(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + return adapter->hw.nvm.word_size * 2; +} + +static int igb_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 *eeprom_buff; + int first_word, last_word; + int ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EINVAL; + + eeprom->magic = hw->vendor_id | (hw->device_id << 16); + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + + eeprom_buff = kmalloc(sizeof(u16) * + (last_word - first_word + 1), GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + if (hw->nvm.type == e1000_nvm_eeprom_spi) + ret_val = e1000_read_nvm(hw, first_word, + last_word - first_word + 1, + eeprom_buff); + else { + for (i = 0; i < last_word - first_word + 1; i++) { + ret_val = e1000_read_nvm(hw, first_word + i, 1, + &eeprom_buff[i]); + if (ret_val) + break; + } + } + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + eeprom_buff[i] = le16_to_cpu(eeprom_buff[i]); + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), + eeprom->len); + kfree(eeprom_buff); + + return ret_val; +} + +static int igb_set_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 *eeprom_buff; + void *ptr; + int max_len, first_word, last_word, ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EOPNOTSUPP; + + if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) + return -EFAULT; + + max_len = hw->nvm.word_size * 2; + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + eeprom_buff = kmalloc(max_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + ptr = (void *)eeprom_buff; + + if (eeprom->offset & 1) { + /* need read/modify/write of first changed EEPROM word */ + /* only the second byte of the word is being modified */ + ret_val = e1000_read_nvm(hw, first_word, 1, + &eeprom_buff[0]); + ptr++; + } + if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { + /* need read/modify/write of last changed EEPROM word */ + /* only the first byte of the word is being modified */ + ret_val = e1000_read_nvm(hw, last_word, 1, + &eeprom_buff[last_word - first_word]); + } + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(ptr, bytes, eeprom->len); + + for (i = 0; i < last_word - first_word + 1; i++) + cpu_to_le16s(&eeprom_buff[i]); + + ret_val = e1000_write_nvm(hw, first_word, + last_word - first_word + 1, eeprom_buff); + + /* Update the checksum if write succeeded. + * and flush shadow RAM for 82573 controllers */ + if (ret_val == 0) + e1000_update_nvm_checksum(hw); + + kfree(eeprom_buff); + return ret_val; +} + +static void igb_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + strncpy(drvinfo->driver, igb_driver_name, sizeof(drvinfo->driver) - 1); + strncpy(drvinfo->version, igb_driver_version, sizeof(drvinfo->version) - 1); + + strlcpy(drvinfo->fw_version, adapter->fw_version, + sizeof(drvinfo->fw_version)); + strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info)); + drvinfo->n_stats = IGB_STATS_LEN; + drvinfo->testinfo_len = IGB_TEST_LEN; + drvinfo->regdump_len = igb_get_regs_len(netdev); + drvinfo->eedump_len = igb_get_eeprom_len(netdev); +} + +static void igb_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + ring->rx_max_pending = IGB_MAX_RXD; + ring->tx_max_pending = IGB_MAX_TXD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = adapter->rx_ring_count; + ring->tx_pending = adapter->tx_ring_count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} + +static int igb_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct igb_ring *temp_ring; + int i, err = 0; + u16 new_rx_count, new_tx_count; + + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + return -EINVAL; + + new_rx_count = min(ring->rx_pending, (u32)IGB_MAX_RXD); + new_rx_count = max(new_rx_count, (u16)IGB_MIN_RXD); + new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE); + + new_tx_count = min(ring->tx_pending, (u32)IGB_MAX_TXD); + new_tx_count = max(new_tx_count, (u16)IGB_MIN_TXD); + new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE); + + if ((new_tx_count == adapter->tx_ring_count) && + (new_rx_count == adapter->rx_ring_count)) { + /* nothing to do */ + return 0; + } + + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + + if (!netif_running(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i]->count = new_tx_count; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i]->count = new_rx_count; + adapter->tx_ring_count = new_tx_count; + adapter->rx_ring_count = new_rx_count; + goto clear_reset; + } + + if (adapter->num_tx_queues > adapter->num_rx_queues) + temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring)); + else + temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring)); + + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } + + igb_down(adapter); + + /* + * We can't just free everything and then setup again, + * because the ISRs in MSI-X mode get passed pointers + * to the tx and rx ring structs. + */ + if (new_tx_count != adapter->tx_ring_count) { + for (i = 0; i < adapter->num_tx_queues; i++) { + memcpy(&temp_ring[i], adapter->tx_ring[i], + sizeof(struct igb_ring)); + + temp_ring[i].count = new_tx_count; + err = igb_setup_tx_resources(&temp_ring[i]); + if (err) { + while (i) { + i--; + igb_free_tx_resources(&temp_ring[i]); + } + goto err_setup; + } + } + + for (i = 0; i < adapter->num_tx_queues; i++) { + igb_free_tx_resources(adapter->tx_ring[i]); + + memcpy(adapter->tx_ring[i], &temp_ring[i], + sizeof(struct igb_ring)); + } + + adapter->tx_ring_count = new_tx_count; + } + + if (new_rx_count != adapter->rx_ring_count) { + for (i = 0; i < adapter->num_rx_queues; i++) { + memcpy(&temp_ring[i], adapter->rx_ring[i], + sizeof(struct igb_ring)); + + temp_ring[i].count = new_rx_count; + err = igb_setup_rx_resources(&temp_ring[i]); + if (err) { + while (i) { + i--; + igb_free_rx_resources(&temp_ring[i]); + } + goto err_setup; + } + + } + + for (i = 0; i < adapter->num_rx_queues; i++) { + igb_free_rx_resources(adapter->rx_ring[i]); + + memcpy(adapter->rx_ring[i], &temp_ring[i], + sizeof(struct igb_ring)); + } + + adapter->rx_ring_count = new_rx_count; + } +err_setup: + igb_up(adapter); + vfree(temp_ring); +clear_reset: + clear_bit(__IGB_RESETTING, &adapter->state); + return err; +} +static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data, + int reg, u32 mask, u32 write) +{ + struct e1000_hw *hw = &adapter->hw; + u32 pat, val; + static const u32 _test[] = + {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; + for (pat = 0; pat < ARRAY_SIZE(_test); pat++) { + E1000_WRITE_REG(hw, reg, (_test[pat] & write)); + val = E1000_READ_REG(hw, reg) & mask; + if (val != (_test[pat] & write & mask)) { + dev_err(pci_dev_to_dev(adapter->pdev), "pattern test reg %04X " + "failed: got 0x%08X expected 0x%08X\n", + E1000_REGISTER(hw, reg), val, (_test[pat] & write & mask)); + *data = E1000_REGISTER(hw, reg); + return 1; + } + } + + return 0; +} + +static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data, + int reg, u32 mask, u32 write) +{ + struct e1000_hw *hw = &adapter->hw; + u32 val; + E1000_WRITE_REG(hw, reg, write & mask); + val = E1000_READ_REG(hw, reg); + if ((write & mask) != (val & mask)) { + dev_err(pci_dev_to_dev(adapter->pdev), "set/check reg %04X test failed:" + " got 0x%08X expected 0x%08X\n", reg, + (val & mask), (write & mask)); + *data = E1000_REGISTER(hw, reg); + return 1; + } + + return 0; +} + +#define REG_PATTERN_TEST(reg, mask, write) \ + do { \ + if (reg_pattern_test(adapter, data, reg, mask, write)) \ + return 1; \ + } while (0) + +#define REG_SET_AND_CHECK(reg, mask, write) \ + do { \ + if (reg_set_and_check(adapter, data, reg, mask, write)) \ + return 1; \ + } while (0) + +static int igb_reg_test(struct igb_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + struct igb_reg_test *test; + u32 value, before, after; + u32 i, toggle; + + switch (adapter->hw.mac.type) { + case e1000_i350: + case e1000_i354: + test = reg_test_i350; + toggle = 0x7FEFF3FF; + break; + case e1000_i210: + case e1000_i211: + test = reg_test_i210; + toggle = 0x7FEFF3FF; + break; + case e1000_82580: + test = reg_test_82580; + toggle = 0x7FEFF3FF; + break; + case e1000_82576: + test = reg_test_82576; + toggle = 0x7FFFF3FF; + break; + default: + test = reg_test_82575; + toggle = 0x7FFFF3FF; + break; + } + + /* Because the status register is such a special case, + * we handle it separately from the rest of the register + * tests. Some bits are read-only, some toggle, and some + * are writable on newer MACs. + */ + before = E1000_READ_REG(hw, E1000_STATUS); + value = (E1000_READ_REG(hw, E1000_STATUS) & toggle); + E1000_WRITE_REG(hw, E1000_STATUS, toggle); + after = E1000_READ_REG(hw, E1000_STATUS) & toggle; + if (value != after) { + dev_err(pci_dev_to_dev(adapter->pdev), "failed STATUS register test " + "got: 0x%08X expected: 0x%08X\n", after, value); + *data = 1; + return 1; + } + /* restore previous status */ + E1000_WRITE_REG(hw, E1000_STATUS, before); + + /* Perform the remainder of the register test, looping through + * the test table until we either fail or reach the null entry. + */ + while (test->reg) { + for (i = 0; i < test->array_len; i++) { + switch (test->test_type) { + case PATTERN_TEST: + REG_PATTERN_TEST(test->reg + + (i * test->reg_offset), + test->mask, + test->write); + break; + case SET_READ_TEST: + REG_SET_AND_CHECK(test->reg + + (i * test->reg_offset), + test->mask, + test->write); + break; + case WRITE_NO_TEST: + writel(test->write, + (adapter->hw.hw_addr + test->reg) + + (i * test->reg_offset)); + break; + case TABLE32_TEST: + REG_PATTERN_TEST(test->reg + (i * 4), + test->mask, + test->write); + break; + case TABLE64_TEST_LO: + REG_PATTERN_TEST(test->reg + (i * 8), + test->mask, + test->write); + break; + case TABLE64_TEST_HI: + REG_PATTERN_TEST((test->reg + 4) + (i * 8), + test->mask, + test->write); + break; + } + } + test++; + } + + *data = 0; + return 0; +} + +static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data) +{ + *data = 0; + + /* Validate NVM checksum */ + if (e1000_validate_nvm_checksum(&adapter->hw) < 0) + *data = 2; + + return *data; +} + +static irqreturn_t igb_test_intr(int irq, void *data) +{ + struct igb_adapter *adapter = data; + struct e1000_hw *hw = &adapter->hw; + + adapter->test_icr |= E1000_READ_REG(hw, E1000_ICR); + + return IRQ_HANDLED; +} + +static int igb_intr_test(struct igb_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 mask, ics_mask, i = 0, shared_int = TRUE; + u32 irq = adapter->pdev->irq; + + *data = 0; + + /* Hook up test interrupt handler just for this test */ + if (adapter->msix_entries) { + if (request_irq(adapter->msix_entries[0].vector, + &igb_test_intr, 0, netdev->name, adapter)) { + *data = 1; + return -1; + } + } else if (adapter->flags & IGB_FLAG_HAS_MSI) { + shared_int = FALSE; + if (request_irq(irq, + igb_test_intr, 0, netdev->name, adapter)) { + *data = 1; + return -1; + } + } else if (!request_irq(irq, igb_test_intr, IRQF_PROBE_SHARED, + netdev->name, adapter)) { + shared_int = FALSE; + } else if (request_irq(irq, &igb_test_intr, IRQF_SHARED, + netdev->name, adapter)) { + *data = 1; + return -1; + } + dev_info(pci_dev_to_dev(adapter->pdev), "testing %s interrupt\n", + (shared_int ? "shared" : "unshared")); + + /* Disable all the interrupts */ + E1000_WRITE_REG(hw, E1000_IMC, ~0); + E1000_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + /* Define all writable bits for ICS */ + switch (hw->mac.type) { + case e1000_82575: + ics_mask = 0x37F47EDD; + break; + case e1000_82576: + ics_mask = 0x77D4FBFD; + break; + case e1000_82580: + ics_mask = 0x77DCFED5; + break; + case e1000_i350: + case e1000_i354: + ics_mask = 0x77DCFED5; + break; + case e1000_i210: + case e1000_i211: + ics_mask = 0x774CFED5; + break; + default: + ics_mask = 0x7FFFFFFF; + break; + } + + /* Test each interrupt */ + for (; i < 31; i++) { + /* Interrupt to test */ + mask = 1 << i; + + if (!(mask & ics_mask)) + continue; + + if (!shared_int) { + /* Disable the interrupt to be reported in + * the cause register and then force the same + * interrupt and see if one gets posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + + /* Flush any pending interrupts */ + E1000_WRITE_REG(hw, E1000_ICR, ~0); + + E1000_WRITE_REG(hw, E1000_IMC, mask); + E1000_WRITE_REG(hw, E1000_ICS, mask); + E1000_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + if (adapter->test_icr & mask) { + *data = 3; + break; + } + } + + /* Enable the interrupt to be reported in + * the cause register and then force the same + * interrupt and see if one gets posted. If + * an interrupt was not posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + + /* Flush any pending interrupts */ + E1000_WRITE_REG(hw, E1000_ICR, ~0); + + E1000_WRITE_REG(hw, E1000_IMS, mask); + E1000_WRITE_REG(hw, E1000_ICS, mask); + E1000_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + if (!(adapter->test_icr & mask)) { + *data = 4; + break; + } + + if (!shared_int) { + /* Disable the other interrupts to be reported in + * the cause register and then force the other + * interrupts and see if any get posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + + /* Flush any pending interrupts */ + E1000_WRITE_REG(hw, E1000_ICR, ~0); + + E1000_WRITE_REG(hw, E1000_IMC, ~mask); + E1000_WRITE_REG(hw, E1000_ICS, ~mask); + E1000_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + if (adapter->test_icr & mask) { + *data = 5; + break; + } + } + } + + /* Disable all the interrupts */ + E1000_WRITE_REG(hw, E1000_IMC, ~0); + E1000_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + /* Unhook test interrupt handler */ + if (adapter->msix_entries) + free_irq(adapter->msix_entries[0].vector, adapter); + else + free_irq(irq, adapter); + + return *data; +} + +static void igb_free_desc_rings(struct igb_adapter *adapter) +{ + igb_free_tx_resources(&adapter->test_tx_ring); + igb_free_rx_resources(&adapter->test_rx_ring); +} + +static int igb_setup_desc_rings(struct igb_adapter *adapter) +{ + struct igb_ring *tx_ring = &adapter->test_tx_ring; + struct igb_ring *rx_ring = &adapter->test_rx_ring; + struct e1000_hw *hw = &adapter->hw; + int ret_val; + + /* Setup Tx descriptor ring and Tx buffers */ + tx_ring->count = IGB_DEFAULT_TXD; + tx_ring->dev = pci_dev_to_dev(adapter->pdev); + tx_ring->netdev = adapter->netdev; + tx_ring->reg_idx = adapter->vfs_allocated_count; + + if (igb_setup_tx_resources(tx_ring)) { + ret_val = 1; + goto err_nomem; + } + + igb_setup_tctl(adapter); + igb_configure_tx_ring(adapter, tx_ring); + + /* Setup Rx descriptor ring and Rx buffers */ + rx_ring->count = IGB_DEFAULT_RXD; + rx_ring->dev = pci_dev_to_dev(adapter->pdev); + rx_ring->netdev = adapter->netdev; +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + rx_ring->rx_buffer_len = IGB_RX_HDR_LEN; +#endif + rx_ring->reg_idx = adapter->vfs_allocated_count; + + if (igb_setup_rx_resources(rx_ring)) { + ret_val = 2; + goto err_nomem; + } + + /* set the default queue to queue 0 of PF */ + E1000_WRITE_REG(hw, E1000_MRQC, adapter->vfs_allocated_count << 3); + + /* enable receive ring */ + igb_setup_rctl(adapter); + igb_configure_rx_ring(adapter, rx_ring); + + igb_alloc_rx_buffers(rx_ring, igb_desc_unused(rx_ring)); + + return 0; + +err_nomem: + igb_free_desc_rings(adapter); + return ret_val; +} + +static void igb_phy_disable_receiver(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + /* Write out to PHY registers 29 and 30 to disable the Receiver. */ + e1000_write_phy_reg(hw, 29, 0x001F); + e1000_write_phy_reg(hw, 30, 0x8FFC); + e1000_write_phy_reg(hw, 29, 0x001A); + e1000_write_phy_reg(hw, 30, 0x8FF0); +} + +static int igb_integrated_phy_loopback(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_reg = 0; + + hw->mac.autoneg = FALSE; + + if (hw->phy.type == e1000_phy_m88) { + if (hw->phy.id != I210_I_PHY_ID) { + /* Auto-MDI/MDIX Off */ + e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); + /* reset to update Auto-MDI/MDIX */ + e1000_write_phy_reg(hw, PHY_CONTROL, 0x9140); + /* autoneg off */ + e1000_write_phy_reg(hw, PHY_CONTROL, 0x8140); + } else { + /* force 1000, set loopback */ + e1000_write_phy_reg(hw, I347AT4_PAGE_SELECT, 0); + e1000_write_phy_reg(hw, PHY_CONTROL, 0x4140); + } + } else { + /* enable MII loopback */ + if (hw->phy.type == e1000_phy_82580) + e1000_write_phy_reg(hw, I82577_PHY_LBK_CTRL, 0x8041); + } + + /* force 1000, set loopback */ + e1000_write_phy_reg(hw, PHY_CONTROL, 0x4140); + + /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg = E1000_READ_REG(hw, E1000_CTRL); + ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ + ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ + E1000_CTRL_FD | /* Force Duplex to FULL */ + E1000_CTRL_SLU); /* Set link up enable bit */ + + if (hw->phy.type == e1000_phy_m88) + ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl_reg); + + /* Disable the receiver on the PHY so when a cable is plugged in, the + * PHY does not begin to autoneg when a cable is reconnected to the NIC. + */ + if (hw->phy.type == e1000_phy_m88) + igb_phy_disable_receiver(adapter); + + mdelay(500); + return 0; +} + +static int igb_set_phy_loopback(struct igb_adapter *adapter) +{ + return igb_integrated_phy_loopback(adapter); +} + +static int igb_setup_loopback_test(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 reg; + + reg = E1000_READ_REG(hw, E1000_CTRL_EXT); + + /* use CTRL_EXT to identify link type as SGMII can appear as copper */ + if (reg & E1000_CTRL_EXT_LINK_MODE_MASK) { + if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) || + (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) || + (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) || + (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) { + + /* Enable DH89xxCC MPHY for near end loopback */ + reg = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTL); + reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) | + E1000_MPHY_PCS_CLK_REG_OFFSET; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTL, reg); + + reg = E1000_READ_REG(hw, E1000_MPHY_DATA); + reg |= E1000_MPHY_PCS_CLK_REG_DIGINELBEN; + E1000_WRITE_REG(hw, E1000_MPHY_DATA, reg); + } + + reg = E1000_READ_REG(hw, E1000_RCTL); + reg |= E1000_RCTL_LBM_TCVR; + E1000_WRITE_REG(hw, E1000_RCTL, reg); + + E1000_WRITE_REG(hw, E1000_SCTL, E1000_ENABLE_SERDES_LOOPBACK); + + reg = E1000_READ_REG(hw, E1000_CTRL); + reg &= ~(E1000_CTRL_RFCE | + E1000_CTRL_TFCE | + E1000_CTRL_LRST); + reg |= E1000_CTRL_SLU | + E1000_CTRL_FD; + E1000_WRITE_REG(hw, E1000_CTRL, reg); + + /* Unset switch control to serdes energy detect */ + reg = E1000_READ_REG(hw, E1000_CONNSW); + reg &= ~E1000_CONNSW_ENRGSRC; + E1000_WRITE_REG(hw, E1000_CONNSW, reg); + + /* Unset sigdetect for SERDES loopback on + * 82580 and newer devices + */ + if (hw->mac.type >= e1000_82580) { + reg = E1000_READ_REG(hw, E1000_PCS_CFG0); + reg |= E1000_PCS_CFG_IGN_SD; + E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); + } + + /* Set PCS register for forced speed */ + reg = E1000_READ_REG(hw, E1000_PCS_LCTL); + reg &= ~E1000_PCS_LCTL_AN_ENABLE; /* Disable Autoneg*/ + reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */ + E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ + E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ + E1000_PCS_LCTL_FSD | /* Force Speed */ + E1000_PCS_LCTL_FORCE_LINK; /* Force Link */ + E1000_WRITE_REG(hw, E1000_PCS_LCTL, reg); + + return 0; + } + + return igb_set_phy_loopback(adapter); +} + +static void igb_loopback_cleanup(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl; + u16 phy_reg; + + if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) || + (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) || + (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) || + (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) { + u32 reg; + + /* Disable near end loopback on DH89xxCC */ + reg = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTL); + reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK ) | + E1000_MPHY_PCS_CLK_REG_OFFSET; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTL, reg); + + reg = E1000_READ_REG(hw, E1000_MPHY_DATA); + reg &= ~E1000_MPHY_PCS_CLK_REG_DIGINELBEN; + E1000_WRITE_REG(hw, E1000_MPHY_DATA, reg); + } + + rctl = E1000_READ_REG(hw, E1000_RCTL); + rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + + hw->mac.autoneg = TRUE; + e1000_read_phy_reg(hw, PHY_CONTROL, &phy_reg); + if (phy_reg & MII_CR_LOOPBACK) { + phy_reg &= ~MII_CR_LOOPBACK; + if (hw->phy.type == I210_I_PHY_ID) + e1000_write_phy_reg(hw, I347AT4_PAGE_SELECT, 0); + e1000_write_phy_reg(hw, PHY_CONTROL, phy_reg); + e1000_phy_commit(hw); + } +} +static void igb_create_lbtest_frame(struct sk_buff *skb, + unsigned int frame_size) +{ + memset(skb->data, 0xFF, frame_size); + frame_size /= 2; + memset(&skb->data[frame_size], 0xAA, frame_size - 1); + memset(&skb->data[frame_size + 10], 0xBE, 1); + memset(&skb->data[frame_size + 12], 0xAF, 1); +} + +static int igb_check_lbtest_frame(struct igb_rx_buffer *rx_buffer, + unsigned int frame_size) +{ + unsigned char *data; + bool match = true; + + frame_size >>= 1; + +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + data = rx_buffer->skb->data; +#else + data = kmap(rx_buffer->page); +#endif + + if (data[3] != 0xFF || + data[frame_size + 10] != 0xBE || + data[frame_size + 12] != 0xAF) + match = false; + +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + kunmap(rx_buffer->page); + +#endif + return match; +} + +static u16 igb_clean_test_rings(struct igb_ring *rx_ring, + struct igb_ring *tx_ring, + unsigned int size) +{ + union e1000_adv_rx_desc *rx_desc; + struct igb_rx_buffer *rx_buffer_info; + struct igb_tx_buffer *tx_buffer_info; + u16 rx_ntc, tx_ntc, count = 0; + + /* initialize next to clean and descriptor values */ + rx_ntc = rx_ring->next_to_clean; + tx_ntc = tx_ring->next_to_clean; + rx_desc = IGB_RX_DESC(rx_ring, rx_ntc); + + while (igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) { + /* check rx buffer */ + rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc]; + + /* sync Rx buffer for CPU read */ + dma_sync_single_for_cpu(rx_ring->dev, + rx_buffer_info->dma, +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + IGB_RX_HDR_LEN, +#else + IGB_RX_BUFSZ, +#endif + DMA_FROM_DEVICE); + + /* verify contents of skb */ + if (igb_check_lbtest_frame(rx_buffer_info, size)) + count++; + + /* sync Rx buffer for device write */ + dma_sync_single_for_device(rx_ring->dev, + rx_buffer_info->dma, +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + IGB_RX_HDR_LEN, +#else + IGB_RX_BUFSZ, +#endif + DMA_FROM_DEVICE); + + /* unmap buffer on tx side */ + tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc]; + igb_unmap_and_free_tx_resource(tx_ring, tx_buffer_info); + + /* increment rx/tx next to clean counters */ + rx_ntc++; + if (rx_ntc == rx_ring->count) + rx_ntc = 0; + tx_ntc++; + if (tx_ntc == tx_ring->count) + tx_ntc = 0; + + /* fetch next descriptor */ + rx_desc = IGB_RX_DESC(rx_ring, rx_ntc); + } + + /* re-map buffers to ring, store next to clean values */ + igb_alloc_rx_buffers(rx_ring, count); + rx_ring->next_to_clean = rx_ntc; + tx_ring->next_to_clean = tx_ntc; + + return count; +} + +static int igb_run_loopback_test(struct igb_adapter *adapter) +{ + struct igb_ring *tx_ring = &adapter->test_tx_ring; + struct igb_ring *rx_ring = &adapter->test_rx_ring; + u16 i, j, lc, good_cnt; + int ret_val = 0; + unsigned int size = IGB_RX_HDR_LEN; + netdev_tx_t tx_ret_val; + struct sk_buff *skb; + + /* allocate test skb */ + skb = alloc_skb(size, GFP_KERNEL); + if (!skb) + return 11; + + /* place data into test skb */ + igb_create_lbtest_frame(skb, size); + skb_put(skb, size); + + /* + * Calculate the loop count based on the largest descriptor ring + * The idea is to wrap the largest ring a number of times using 64 + * send/receive pairs during each loop + */ + + if (rx_ring->count <= tx_ring->count) + lc = ((tx_ring->count / 64) * 2) + 1; + else + lc = ((rx_ring->count / 64) * 2) + 1; + + for (j = 0; j <= lc; j++) { /* loop count loop */ + /* reset count of good packets */ + good_cnt = 0; + + /* place 64 packets on the transmit queue*/ + for (i = 0; i < 64; i++) { + skb_get(skb); + tx_ret_val = igb_xmit_frame_ring(skb, tx_ring); + if (tx_ret_val == NETDEV_TX_OK) + good_cnt++; + } + + if (good_cnt != 64) { + ret_val = 12; + break; + } + + /* allow 200 milliseconds for packets to go from tx to rx */ + msleep(200); + + good_cnt = igb_clean_test_rings(rx_ring, tx_ring, size); + if (good_cnt != 64) { + ret_val = 13; + break; + } + } /* end loop count loop */ + + /* free the original skb */ + kfree_skb(skb); + + return ret_val; +} + +static int igb_loopback_test(struct igb_adapter *adapter, u64 *data) +{ + /* PHY loopback cannot be performed if SoL/IDER + * sessions are active */ + if (e1000_check_reset_block(&adapter->hw)) { + dev_err(pci_dev_to_dev(adapter->pdev), + "Cannot do PHY loopback test " + "when SoL/IDER is active.\n"); + *data = 0; + goto out; + } + if (adapter->hw.mac.type == e1000_i354) { + dev_info(&adapter->pdev->dev, + "Loopback test not supported on i354.\n"); + *data = 0; + goto out; + } + *data = igb_setup_desc_rings(adapter); + if (*data) + goto out; + *data = igb_setup_loopback_test(adapter); + if (*data) + goto err_loopback; + *data = igb_run_loopback_test(adapter); + + igb_loopback_cleanup(adapter); + +err_loopback: + igb_free_desc_rings(adapter); +out: + return *data; +} + +static int igb_link_test(struct igb_adapter *adapter, u64 *data) +{ + u32 link; + int i, time; + + *data = 0; + time = 0; + if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) { + int i = 0; + adapter->hw.mac.serdes_has_link = FALSE; + + /* On some blade server designs, link establishment + * could take as long as 2-3 minutes */ + do { + e1000_check_for_link(&adapter->hw); + if (adapter->hw.mac.serdes_has_link) + goto out; + msleep(20); + } while (i++ < 3750); + + *data = 1; + } else { + for (i=0; i < IGB_MAX_LINK_TRIES; i++) { + link = igb_has_link(adapter); + if (link) + goto out; + else { + time++; + msleep(1000); + } + } + if (!link) + *data = 1; + } + out: + return *data; +} + +static void igb_diag_test(struct net_device *netdev, + struct ethtool_test *eth_test, u64 *data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + u16 autoneg_advertised; + u8 forced_speed_duplex, autoneg; + bool if_running = netif_running(netdev); + + set_bit(__IGB_TESTING, &adapter->state); + if (eth_test->flags == ETH_TEST_FL_OFFLINE) { + /* Offline tests */ + + /* save speed, duplex, autoneg settings */ + autoneg_advertised = adapter->hw.phy.autoneg_advertised; + forced_speed_duplex = adapter->hw.mac.forced_speed_duplex; + autoneg = adapter->hw.mac.autoneg; + + dev_info(pci_dev_to_dev(adapter->pdev), "offline testing starting\n"); + + /* power up link for link test */ + igb_power_up_link(adapter); + + /* Link test performed before hardware reset so autoneg doesn't + * interfere with test result */ + if (igb_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + if (if_running) + /* indicate we're in test mode */ + dev_close(netdev); + else + igb_reset(adapter); + + if (igb_reg_test(adapter, &data[0])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + igb_reset(adapter); + if (igb_eeprom_test(adapter, &data[1])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + igb_reset(adapter); + if (igb_intr_test(adapter, &data[2])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + igb_reset(adapter); + + /* power up link for loopback test */ + igb_power_up_link(adapter); + + if (igb_loopback_test(adapter, &data[3])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* restore speed, duplex, autoneg settings */ + adapter->hw.phy.autoneg_advertised = autoneg_advertised; + adapter->hw.mac.forced_speed_duplex = forced_speed_duplex; + adapter->hw.mac.autoneg = autoneg; + + /* force this routine to wait until autoneg complete/timeout */ + adapter->hw.phy.autoneg_wait_to_complete = TRUE; + igb_reset(adapter); + adapter->hw.phy.autoneg_wait_to_complete = FALSE; + + clear_bit(__IGB_TESTING, &adapter->state); + if (if_running) + dev_open(netdev); + } else { + dev_info(pci_dev_to_dev(adapter->pdev), "online testing starting\n"); + + /* PHY is powered down when interface is down */ + if (if_running && igb_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + else + data[4] = 0; + + /* Online tests aren't run; pass by default */ + data[0] = 0; + data[1] = 0; + data[2] = 0; + data[3] = 0; + + clear_bit(__IGB_TESTING, &adapter->state); + } + msleep_interruptible(4 * 1000); +} + +static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_MCAST | + WAKE_BCAST | WAKE_MAGIC | + WAKE_PHY; + wol->wolopts = 0; + + if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED)) + return; + + /* apply any specific unsupported masks here */ + switch (adapter->hw.device_id) { + default: + break; + } + + if (adapter->wol & E1000_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & E1000_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & E1000_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & E1000_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + if (adapter->wol & E1000_WUFC_LNKC) + wol->wolopts |= WAKE_PHY; +} + +static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + + if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED)) + return wol->wolopts ? -EOPNOTSUPP : 0; + + /* these settings will always override what we currently have */ + adapter->wol = 0; + + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= E1000_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= E1000_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= E1000_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= E1000_WUFC_MAG; + if (wol->wolopts & WAKE_PHY) + adapter->wol |= E1000_WUFC_LNKC; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + return 0; +} + +/* bit defines for adapter->led_status */ +#ifdef HAVE_ETHTOOL_SET_PHYS_ID +static int igb_set_phys_id(struct net_device *netdev, + enum ethtool_phys_id_state state) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + switch (state) { + case ETHTOOL_ID_ACTIVE: + e1000_blink_led(hw); + return 2; + case ETHTOOL_ID_ON: + e1000_led_on(hw); + break; + case ETHTOOL_ID_OFF: + e1000_led_off(hw); + break; + case ETHTOOL_ID_INACTIVE: + e1000_led_off(hw); + e1000_cleanup_led(hw); + break; + } + + return 0; +} +#else +static int igb_phys_id(struct net_device *netdev, u32 data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + unsigned long timeout; + + timeout = data * 1000; + + /* + * msleep_interruptable only accepts unsigned int so we are limited + * in how long a duration we can wait + */ + if (!timeout || timeout > UINT_MAX) + timeout = UINT_MAX; + + e1000_blink_led(hw); + msleep_interruptible(timeout); + + e1000_led_off(hw); + e1000_cleanup_led(hw); + + return 0; +} +#endif /* HAVE_ETHTOOL_SET_PHYS_ID */ + +static int igb_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + int i; + + if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) || + ((ec->rx_coalesce_usecs > 3) && + (ec->rx_coalesce_usecs < IGB_MIN_ITR_USECS)) || + (ec->rx_coalesce_usecs == 2)) + { + printk("set_coalesce:invalid parameter.."); + return -EINVAL; + } + + if ((ec->tx_coalesce_usecs > IGB_MAX_ITR_USECS) || + ((ec->tx_coalesce_usecs > 3) && + (ec->tx_coalesce_usecs < IGB_MIN_ITR_USECS)) || + (ec->tx_coalesce_usecs == 2)) + return -EINVAL; + + if ((adapter->flags & IGB_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs) + return -EINVAL; + + if (ec->tx_max_coalesced_frames_irq) + adapter->tx_work_limit = ec->tx_max_coalesced_frames_irq; + + /* If ITR is disabled, disable DMAC */ + if (ec->rx_coalesce_usecs == 0) { + adapter->dmac = IGB_DMAC_DISABLE; + } + + /* convert to rate of irq's per second */ + if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) + adapter->rx_itr_setting = ec->rx_coalesce_usecs; + else + adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2; + + /* convert to rate of irq's per second */ + if (adapter->flags & IGB_FLAG_QUEUE_PAIRS) + adapter->tx_itr_setting = adapter->rx_itr_setting; + else if (ec->tx_coalesce_usecs && ec->tx_coalesce_usecs <= 3) + adapter->tx_itr_setting = ec->tx_coalesce_usecs; + else + adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2; + + for (i = 0; i < adapter->num_q_vectors; i++) { + struct igb_q_vector *q_vector = adapter->q_vector[i]; + q_vector->tx.work_limit = adapter->tx_work_limit; + if (q_vector->rx.ring) + q_vector->itr_val = adapter->rx_itr_setting; + else + q_vector->itr_val = adapter->tx_itr_setting; + if (q_vector->itr_val && q_vector->itr_val <= 3) + q_vector->itr_val = IGB_START_ITR; + q_vector->set_itr = 1; + } + + return 0; +} + +static int igb_get_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + if (adapter->rx_itr_setting <= 3) + ec->rx_coalesce_usecs = adapter->rx_itr_setting; + else + ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2; + + ec->tx_max_coalesced_frames_irq = adapter->tx_work_limit; + + if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) { + if (adapter->tx_itr_setting <= 3) + ec->tx_coalesce_usecs = adapter->tx_itr_setting; + else + ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2; + } + + return 0; +} + +static int igb_nway_reset(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + if (netif_running(netdev)) + igb_reinit_locked(adapter); + return 0; +} + +#ifdef HAVE_ETHTOOL_GET_SSET_COUNT +static int igb_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return IGB_STATS_LEN; + case ETH_SS_TEST: + return IGB_TEST_LEN; + default: + return -ENOTSUPP; + } +} +#else +static int igb_get_stats_count(struct net_device *netdev) +{ + return IGB_STATS_LEN; +} + +static int igb_diag_test_count(struct net_device *netdev) +{ + return IGB_TEST_LEN; +} +#endif + +static void igb_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); +#ifdef HAVE_NETDEV_STATS_IN_NETDEV + struct net_device_stats *net_stats = &netdev->stats; +#else + struct net_device_stats *net_stats = &adapter->net_stats; +#endif + u64 *queue_stat; + int i, j, k; + char *p; + + igb_update_stats(adapter); + + for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) { + p = (char *)adapter + igb_gstrings_stats[i].stat_offset; + data[i] = (igb_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + for (j = 0; j < IGB_NETDEV_STATS_LEN; j++, i++) { + p = (char *)net_stats + igb_gstrings_net_stats[j].stat_offset; + data[i] = (igb_gstrings_net_stats[j].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + for (j = 0; j < adapter->num_tx_queues; j++) { + queue_stat = (u64 *)&adapter->tx_ring[j]->tx_stats; + for (k = 0; k < IGB_TX_QUEUE_STATS_LEN; k++, i++) + data[i] = queue_stat[k]; + } + for (j = 0; j < adapter->num_rx_queues; j++) { + queue_stat = (u64 *)&adapter->rx_ring[j]->rx_stats; + for (k = 0; k < IGB_RX_QUEUE_STATS_LEN; k++, i++) + data[i] = queue_stat[k]; + } +} + +static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + u8 *p = data; + int i; + + switch (stringset) { + case ETH_SS_TEST: + memcpy(data, *igb_gstrings_test, + IGB_TEST_LEN*ETH_GSTRING_LEN); + break; + case ETH_SS_STATS: + for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) { + memcpy(p, igb_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < IGB_NETDEV_STATS_LEN; i++) { + memcpy(p, igb_gstrings_net_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_tx_queues; i++) { + sprintf(p, "tx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_queue_%u_restart", i); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_rx_queues; i++) { + sprintf(p, "rx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_drops", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_csum_err", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_alloc_failed", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_ipv4_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_ipv4e_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_ipv6_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_ipv6e_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_tcp_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_udp_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_sctp_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_nfs_packets", i); + p += ETH_GSTRING_LEN; + } +/* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */ + break; + } +} + +#ifdef HAVE_ETHTOOL_GET_TS_INFO +static int igb_get_ts_info(struct net_device *dev, + struct ethtool_ts_info *info) +{ + struct igb_adapter *adapter = netdev_priv(dev); + + switch (adapter->hw.mac.type) { +#ifdef HAVE_PTP_1588_CLOCK + case e1000_82575: + info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE; + return 0; + case e1000_82576: + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + + if (adapter->ptp_clock) + info->phc_index = ptp_clock_index(adapter->ptp_clock); + else + info->phc_index = -1; + + info->tx_types = + (1 << HWTSTAMP_TX_OFF) | + (1 << HWTSTAMP_TX_ON); + + info->rx_filters = 1 << HWTSTAMP_FILTER_NONE; + + /* 82576 does not support timestamping all packets. */ + if (adapter->hw.mac.type >= e1000_82580) + info->rx_filters |= 1 << HWTSTAMP_FILTER_ALL; + else + info->rx_filters |= + (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_EVENT); + + return 0; +#endif /* HAVE_PTP_1588_CLOCK */ + default: + return -EOPNOTSUPP; + } +} +#endif /* HAVE_ETHTOOL_GET_TS_INFO */ + +#ifdef CONFIG_PM_RUNTIME +static int igb_ethtool_begin(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + pm_runtime_get_sync(&adapter->pdev->dev); + + return 0; +} + +static void igb_ethtool_complete(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + pm_runtime_put(&adapter->pdev->dev); +} +#endif /* CONFIG_PM_RUNTIME */ + +#ifndef HAVE_NDO_SET_FEATURES +static u32 igb_get_rx_csum(struct net_device *netdev) +{ + return !!(netdev->features & NETIF_F_RXCSUM); +} + +static int igb_set_rx_csum(struct net_device *netdev, u32 data) +{ + const u32 feature_list = NETIF_F_RXCSUM; + + if (data) + netdev->features |= feature_list; + else + netdev->features &= ~feature_list; + + return 0; +} + +static int igb_set_tx_csum(struct net_device *netdev, u32 data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); +#ifdef NETIF_F_IPV6_CSUM + u32 feature_list = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; +#else + u32 feature_list = NETIF_F_IP_CSUM; +#endif + + if (adapter->hw.mac.type >= e1000_82576) + feature_list |= NETIF_F_SCTP_CSUM; + + if (data) + netdev->features |= feature_list; + else + netdev->features &= ~feature_list; + + return 0; +} + +#ifdef NETIF_F_TSO +static int igb_set_tso(struct net_device *netdev, u32 data) +{ +#ifdef NETIF_F_TSO6 + const u32 feature_list = NETIF_F_TSO | NETIF_F_TSO6; +#else + const u32 feature_list = NETIF_F_TSO; +#endif + + if (data) + netdev->features |= feature_list; + else + netdev->features &= ~feature_list; + +#ifndef HAVE_NETDEV_VLAN_FEATURES + if (!data) { + struct igb_adapter *adapter = netdev_priv(netdev); + struct net_device *v_netdev; + int i; + + /* disable TSO on all VLANs if they're present */ + if (!adapter->vlgrp) + goto tso_out; + + for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { + v_netdev = vlan_group_get_device(adapter->vlgrp, i); + if (!v_netdev) + continue; + + v_netdev->features &= ~feature_list; + vlan_group_set_device(adapter->vlgrp, i, v_netdev); + } + } + +tso_out: + +#endif /* HAVE_NETDEV_VLAN_FEATURES */ + return 0; +} + +#endif /* NETIF_F_TSO */ +#ifdef ETHTOOL_GFLAGS +static int igb_set_flags(struct net_device *netdev, u32 data) +{ + u32 supported_flags = ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN | + ETH_FLAG_RXHASH; +#ifndef HAVE_VLAN_RX_REGISTER + u32 changed = netdev->features ^ data; +#endif + int rc; +#ifndef IGB_NO_LRO + + supported_flags |= ETH_FLAG_LRO; +#endif + /* + * Since there is no support for separate tx vlan accel + * enabled make sure tx flag is cleared if rx is. + */ + if (!(data & ETH_FLAG_RXVLAN)) + data &= ~ETH_FLAG_TXVLAN; + + rc = ethtool_op_set_flags(netdev, data, supported_flags); + if (rc) + return rc; +#ifndef HAVE_VLAN_RX_REGISTER + + if (changed & ETH_FLAG_RXVLAN) + igb_vlan_mode(netdev, data); +#endif + + return 0; +} + +#endif /* ETHTOOL_GFLAGS */ +#endif /* HAVE_NDO_SET_FEATURES */ +#ifdef ETHTOOL_SADV_COAL +static int igb_set_adv_coal(struct net_device *netdev, struct ethtool_value *edata) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + switch (edata->data) { + case IGB_DMAC_DISABLE: + adapter->dmac = edata->data; + break; + case IGB_DMAC_MIN: + adapter->dmac = edata->data; + break; + case IGB_DMAC_500: + adapter->dmac = edata->data; + break; + case IGB_DMAC_EN_DEFAULT: + adapter->dmac = edata->data; + break; + case IGB_DMAC_2000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_3000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_4000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_5000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_6000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_7000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_8000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_9000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_MAX: + adapter->dmac = edata->data; + break; + default: + adapter->dmac = IGB_DMAC_DISABLE; + printk("set_dmac: invalid setting, setting DMAC to %d\n", + adapter->dmac); + } + printk("%s: setting DMAC to %d\n", netdev->name, adapter->dmac); + return 0; +} +#endif /* ETHTOOL_SADV_COAL */ +#ifdef ETHTOOL_GADV_COAL +static void igb_get_dmac(struct net_device *netdev, + struct ethtool_value *edata) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + edata->data = adapter->dmac; + + return; +} +#endif + +#ifdef ETHTOOL_GEEE +static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ret_val; + u16 phy_data; + + if ((hw->mac.type < e1000_i350) || + (hw->phy.media_type != e1000_media_type_copper)) + return -EOPNOTSUPP; + + edata->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_100baseT_Full); + + if (!hw->dev_spec._82575.eee_disable) + edata->advertised = + mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert); + + /* The IPCNFG and EEER registers are not supported on I354. */ + if (hw->mac.type == e1000_i354) { + e1000_get_eee_status_i354(hw, (bool *)&edata->eee_active); + } else { + u32 eeer; + + eeer = E1000_READ_REG(hw, E1000_EEER); + + /* EEE status on negotiated link */ + if (eeer & E1000_EEER_EEE_NEG) + edata->eee_active = true; + + if (eeer & E1000_EEER_TX_LPI_EN) + edata->tx_lpi_enabled = true; + } + + /* EEE Link Partner Advertised */ + switch (hw->mac.type) { + case e1000_i350: + ret_val = e1000_read_emi_reg(hw, E1000_EEE_LP_ADV_ADDR_I350, + &phy_data); + if (ret_val) + return -ENODATA; + + edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + break; + case e1000_i354: + case e1000_i210: + case e1000_i211: + ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_LP_ADV_ADDR_I210, + E1000_EEE_LP_ADV_DEV_I210, + &phy_data); + if (ret_val) + return -ENODATA; + + edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + break; + default: + break; + } + + edata->eee_enabled = !hw->dev_spec._82575.eee_disable; + + if ((hw->mac.type == e1000_i354) && + (edata->eee_enabled)) + edata->tx_lpi_enabled = true; + + /* + * report correct negotiated EEE status for devices that + * wrongly report EEE at half-duplex + */ + if (adapter->link_duplex == HALF_DUPLEX) { + edata->eee_enabled = false; + edata->eee_active = false; + edata->tx_lpi_enabled = false; + edata->advertised &= ~edata->advertised; + } + + return 0; +} +#endif + +#ifdef ETHTOOL_SEEE +static int igb_set_eee(struct net_device *netdev, + struct ethtool_eee *edata) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct ethtool_eee eee_curr; + s32 ret_val; + + if ((hw->mac.type < e1000_i350) || + (hw->phy.media_type != e1000_media_type_copper)) + return -EOPNOTSUPP; + + ret_val = igb_get_eee(netdev, &eee_curr); + if (ret_val) + return ret_val; + + if (eee_curr.eee_enabled) { + if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) { + dev_err(pci_dev_to_dev(adapter->pdev), + "Setting EEE tx-lpi is not supported\n"); + return -EINVAL; + } + + /* Tx LPI time is not implemented currently */ + if (edata->tx_lpi_timer) { + dev_err(pci_dev_to_dev(adapter->pdev), + "Setting EEE Tx LPI timer is not supported\n"); + return -EINVAL; + } + + if (edata->advertised & + ~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL)) { + dev_err(pci_dev_to_dev(adapter->pdev), + "EEE Advertisement supports only 100Tx and or 100T full duplex\n"); + return -EINVAL; + } + + } else if (!edata->eee_enabled) { + dev_err(pci_dev_to_dev(adapter->pdev), + "Setting EEE options is not supported with EEE disabled\n"); + return -EINVAL; + } + + adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised); + + if (hw->dev_spec._82575.eee_disable != !edata->eee_enabled) { + hw->dev_spec._82575.eee_disable = !edata->eee_enabled; + + /* reset link */ + if (netif_running(netdev)) + igb_reinit_locked(adapter); + else + igb_reset(adapter); + } + + return 0; +} +#endif /* ETHTOOL_SEEE */ + +#ifdef ETHTOOL_GRXRINGS +static int igb_get_rss_hash_opts(struct igb_adapter *adapter, + struct ethtool_rxnfc *cmd) +{ + cmd->data = 0; + + /* Report default options for RSS on igb */ + switch (cmd->flow_type) { + case TCP_V4_FLOW: + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + case UDP_V4_FLOW: + if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP) + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + case SCTP_V4_FLOW: + case AH_ESP_V4_FLOW: + case AH_V4_FLOW: + case ESP_V4_FLOW: + case IPV4_FLOW: + cmd->data |= RXH_IP_SRC | RXH_IP_DST; + break; + case TCP_V6_FLOW: + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + case UDP_V6_FLOW: + if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP) + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + case SCTP_V6_FLOW: + case AH_ESP_V6_FLOW: + case AH_V6_FLOW: + case ESP_V6_FLOW: + case IPV6_FLOW: + cmd->data |= RXH_IP_SRC | RXH_IP_DST; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int igb_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd, +#ifdef HAVE_ETHTOOL_GET_RXNFC_VOID_RULE_LOCS + void *rule_locs) +#else + u32 *rule_locs) +#endif +{ + struct igb_adapter *adapter = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + switch (cmd->cmd) { + case ETHTOOL_GRXRINGS: + cmd->data = adapter->num_rx_queues; + ret = 0; + break; + case ETHTOOL_GRXFH: + ret = igb_get_rss_hash_opts(adapter, cmd); + break; + default: + break; + } + + return ret; +} + +#define UDP_RSS_FLAGS (IGB_FLAG_RSS_FIELD_IPV4_UDP | \ + IGB_FLAG_RSS_FIELD_IPV6_UDP) +static int igb_set_rss_hash_opt(struct igb_adapter *adapter, + struct ethtool_rxnfc *nfc) +{ + u32 flags = adapter->flags; + + /* + * RSS does not support anything other than hashing + * to queues on src and dst IPs and ports + */ + if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3)) + return -EINVAL; + + switch (nfc->flow_type) { + case TCP_V4_FLOW: + case TCP_V6_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST) || + !(nfc->data & RXH_L4_B_0_1) || + !(nfc->data & RXH_L4_B_2_3)) + return -EINVAL; + break; + case UDP_V4_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST)) + return -EINVAL; + switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) { + case 0: + flags &= ~IGB_FLAG_RSS_FIELD_IPV4_UDP; + break; + case (RXH_L4_B_0_1 | RXH_L4_B_2_3): + flags |= IGB_FLAG_RSS_FIELD_IPV4_UDP; + break; + default: + return -EINVAL; + } + break; + case UDP_V6_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST)) + return -EINVAL; + switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) { + case 0: + flags &= ~IGB_FLAG_RSS_FIELD_IPV6_UDP; + break; + case (RXH_L4_B_0_1 | RXH_L4_B_2_3): + flags |= IGB_FLAG_RSS_FIELD_IPV6_UDP; + break; + default: + return -EINVAL; + } + break; + case AH_ESP_V4_FLOW: + case AH_V4_FLOW: + case ESP_V4_FLOW: + case SCTP_V4_FLOW: + case AH_ESP_V6_FLOW: + case AH_V6_FLOW: + case ESP_V6_FLOW: + case SCTP_V6_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST) || + (nfc->data & RXH_L4_B_0_1) || + (nfc->data & RXH_L4_B_2_3)) + return -EINVAL; + break; + default: + return -EINVAL; + } + + /* if we changed something we need to update flags */ + if (flags != adapter->flags) { + struct e1000_hw *hw = &adapter->hw; + u32 mrqc = E1000_READ_REG(hw, E1000_MRQC); + + if ((flags & UDP_RSS_FLAGS) && + !(adapter->flags & UDP_RSS_FLAGS)) + DPRINTK(DRV, WARNING, + "enabling UDP RSS: fragmented packets may arrive out of order to the stack above\n"); + + adapter->flags = flags; + + /* Perform hash on these packet types */ + mrqc |= E1000_MRQC_RSS_FIELD_IPV4 | + E1000_MRQC_RSS_FIELD_IPV4_TCP | + E1000_MRQC_RSS_FIELD_IPV6 | + E1000_MRQC_RSS_FIELD_IPV6_TCP; + + mrqc &= ~(E1000_MRQC_RSS_FIELD_IPV4_UDP | + E1000_MRQC_RSS_FIELD_IPV6_UDP); + + if (flags & IGB_FLAG_RSS_FIELD_IPV4_UDP) + mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP; + + if (flags & IGB_FLAG_RSS_FIELD_IPV6_UDP) + mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP; + + E1000_WRITE_REG(hw, E1000_MRQC, mrqc); + } + + return 0; +} + +static int igb_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd) +{ + struct igb_adapter *adapter = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + switch (cmd->cmd) { + case ETHTOOL_SRXFH: + ret = igb_set_rss_hash_opt(adapter, cmd); + break; + default: + break; + } + + return ret; +} +#endif /* ETHTOOL_GRXRINGS */ + +static const struct ethtool_ops igb_ethtool_ops = { + .get_settings = igb_get_settings, + .set_settings = igb_set_settings, + .get_drvinfo = igb_get_drvinfo, + .get_regs_len = igb_get_regs_len, + .get_regs = igb_get_regs, + .get_wol = igb_get_wol, + .set_wol = igb_set_wol, + .get_msglevel = igb_get_msglevel, + .set_msglevel = igb_set_msglevel, + .nway_reset = igb_nway_reset, + .get_link = igb_get_link, + .get_eeprom_len = igb_get_eeprom_len, + .get_eeprom = igb_get_eeprom, + .set_eeprom = igb_set_eeprom, + .get_ringparam = igb_get_ringparam, + .set_ringparam = igb_set_ringparam, + .get_pauseparam = igb_get_pauseparam, + .set_pauseparam = igb_set_pauseparam, + .self_test = igb_diag_test, + .get_strings = igb_get_strings, +#ifndef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT +#ifdef HAVE_ETHTOOL_SET_PHYS_ID + .set_phys_id = igb_set_phys_id, +#else + .phys_id = igb_phys_id, +#endif /* HAVE_ETHTOOL_SET_PHYS_ID */ +#endif /* HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT */ +#ifdef HAVE_ETHTOOL_GET_SSET_COUNT + .get_sset_count = igb_get_sset_count, +#else + .get_stats_count = igb_get_stats_count, + .self_test_count = igb_diag_test_count, +#endif + .get_ethtool_stats = igb_get_ethtool_stats, +#ifdef HAVE_ETHTOOL_GET_PERM_ADDR + .get_perm_addr = ethtool_op_get_perm_addr, +#endif + .get_coalesce = igb_get_coalesce, + .set_coalesce = igb_set_coalesce, +#ifndef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT +#ifdef HAVE_ETHTOOL_GET_TS_INFO + .get_ts_info = igb_get_ts_info, +#endif /* HAVE_ETHTOOL_GET_TS_INFO */ +#endif /* HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT */ +#ifdef CONFIG_PM_RUNTIME + .begin = igb_ethtool_begin, + .complete = igb_ethtool_complete, +#endif /* CONFIG_PM_RUNTIME */ +#ifndef HAVE_NDO_SET_FEATURES + .get_rx_csum = igb_get_rx_csum, + .set_rx_csum = igb_set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = igb_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, +#ifdef NETIF_F_TSO + .get_tso = ethtool_op_get_tso, + .set_tso = igb_set_tso, +#endif +#ifdef ETHTOOL_GFLAGS + .get_flags = ethtool_op_get_flags, + .set_flags = igb_set_flags, +#endif /* ETHTOOL_GFLAGS */ +#endif /* HAVE_NDO_SET_FEATURES */ +#ifdef ETHTOOL_GADV_COAL + .get_advcoal = igb_get_adv_coal, + .set_advcoal = igb_set_dmac_coal, +#endif /* ETHTOOL_GADV_COAL */ +#ifndef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT +#ifdef ETHTOOL_GEEE + .get_eee = igb_get_eee, +#endif +#ifdef ETHTOOL_SEEE + .set_eee = igb_set_eee, +#endif +#endif /* HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT */ +#ifdef ETHTOOL_GRXRINGS + .get_rxnfc = igb_get_rxnfc, + .set_rxnfc = igb_set_rxnfc, +#endif +}; + +#ifdef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT +static const struct ethtool_ops_ext igb_ethtool_ops_ext = { + .size = sizeof(struct ethtool_ops_ext), + .get_ts_info = igb_get_ts_info, + .set_phys_id = igb_set_phys_id, + .get_eee = igb_get_eee, + .set_eee = igb_set_eee, +}; + +void igb_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &igb_ethtool_ops); + set_ethtool_ops_ext(netdev, &igb_ethtool_ops_ext); +} +#else +void igb_set_ethtool_ops(struct net_device *netdev) +{ + /* have to "undeclare" const on this struct to remove warnings */ + SET_ETHTOOL_OPS(netdev, (struct ethtool_ops *)&igb_ethtool_ops); +} +#endif /* HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT */ +#endif /* SIOCETHTOOL */ diff --git a/kernel/linux/kni/ethtool/igb/igb_main.c b/kernel/linux/kni/ethtool/igb/igb_main.c new file mode 100644 index 00000000..af378d2f --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb_main.c @@ -0,0 +1,10344 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/vmalloc.h> +#include <linux/pagemap.h> +#include <linux/netdevice.h> +#include <linux/tcp.h> +#ifdef NETIF_F_TSO +#include <net/checksum.h> +#ifdef NETIF_F_TSO6 +#include <linux/ipv6.h> +#include <net/ip6_checksum.h> +#endif +#endif +#ifdef SIOCGMIIPHY +#include <linux/mii.h> +#endif +#ifdef SIOCETHTOOL +#include <linux/ethtool.h> +#endif +#include <linux/if_vlan.h> +#ifdef CONFIG_PM_RUNTIME +#include <linux/pm_runtime.h> +#endif /* CONFIG_PM_RUNTIME */ + +#include <linux/if_bridge.h> +#include "igb.h" +#include "igb_vmdq.h" + +#include <linux/uio_driver.h> + +#if defined(DEBUG) || defined (DEBUG_DUMP) || defined (DEBUG_ICR) || defined(DEBUG_ITR) +#define DRV_DEBUG "_debug" +#else +#define DRV_DEBUG +#endif +#define DRV_HW_PERF +#define VERSION_SUFFIX + +#define MAJ 5 +#define MIN 0 +#define BUILD 6 +#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." __stringify(BUILD) VERSION_SUFFIX DRV_DEBUG DRV_HW_PERF + +char igb_driver_name[] = "igb"; +char igb_driver_version[] = DRV_VERSION; +static const char igb_driver_string[] = + "Intel(R) Gigabit Ethernet Network Driver"; +static const char igb_copyright[] = + "Copyright (c) 2007-2013 Intel Corporation."; + +const struct pci_device_id igb_pci_tbl[] = { + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_1GBPS) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_SGMII) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SGMII) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER_FLASHLESS) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES_FLASHLESS) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I211_COPPER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER) }, + /* required last entry */ + {0, } +}; + +//MODULE_DEVICE_TABLE(pci, igb_pci_tbl); +static void igb_set_sriov_capability(struct igb_adapter *adapter) __attribute__((__unused__)); +void igb_reset(struct igb_adapter *); +static int igb_setup_all_tx_resources(struct igb_adapter *); +static int igb_setup_all_rx_resources(struct igb_adapter *); +static void igb_free_all_tx_resources(struct igb_adapter *); +static void igb_free_all_rx_resources(struct igb_adapter *); +static void igb_setup_mrqc(struct igb_adapter *); +void igb_update_stats(struct igb_adapter *); +static int igb_probe(struct pci_dev *, const struct pci_device_id *); +static void __devexit igb_remove(struct pci_dev *pdev); +static int igb_sw_init(struct igb_adapter *); +static int igb_open(struct net_device *); +static int igb_close(struct net_device *); +static void igb_configure(struct igb_adapter *); +static void igb_configure_tx(struct igb_adapter *); +static void igb_configure_rx(struct igb_adapter *); +static void igb_clean_all_tx_rings(struct igb_adapter *); +static void igb_clean_all_rx_rings(struct igb_adapter *); +static void igb_clean_tx_ring(struct igb_ring *); +static void igb_set_rx_mode(struct net_device *); +#ifdef HAVE_TIMER_SETUP +static void igb_update_phy_info(struct timer_list *); +static void igb_watchdog(struct timer_list *); +#else +static void igb_update_phy_info(unsigned long); +static void igb_watchdog(unsigned long); +#endif +static void igb_watchdog_task(struct work_struct *); +static void igb_dma_err_task(struct work_struct *); +#ifdef HAVE_TIMER_SETUP +static void igb_dma_err_timer(struct timer_list *); +#else +static void igb_dma_err_timer(unsigned long data); +#endif +static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, struct net_device *); +static struct net_device_stats *igb_get_stats(struct net_device *); +static int igb_change_mtu(struct net_device *, int); +void igb_full_sync_mac_table(struct igb_adapter *adapter); +static int igb_set_mac(struct net_device *, void *); +static void igb_set_uta(struct igb_adapter *adapter); +static irqreturn_t igb_intr(int irq, void *); +static irqreturn_t igb_intr_msi(int irq, void *); +static irqreturn_t igb_msix_other(int irq, void *); +static irqreturn_t igb_msix_ring(int irq, void *); +#ifdef IGB_DCA +static void igb_update_dca(struct igb_q_vector *); +static void igb_setup_dca(struct igb_adapter *); +#endif /* IGB_DCA */ +static int igb_poll(struct napi_struct *, int); +static bool igb_clean_tx_irq(struct igb_q_vector *); +static bool igb_clean_rx_irq(struct igb_q_vector *, int); +static int igb_ioctl(struct net_device *, struct ifreq *, int cmd); +static void igb_tx_timeout(struct net_device *); +static void igb_reset_task(struct work_struct *); +#ifdef HAVE_VLAN_RX_REGISTER +static void igb_vlan_mode(struct net_device *, struct vlan_group *); +#endif +#ifdef HAVE_VLAN_PROTOCOL +static int igb_vlan_rx_add_vid(struct net_device *, + __be16 proto, u16); +static int igb_vlan_rx_kill_vid(struct net_device *, + __be16 proto, u16); +#elif defined HAVE_INT_NDO_VLAN_RX_ADD_VID +#ifdef NETIF_F_HW_VLAN_CTAG_RX +static int igb_vlan_rx_add_vid(struct net_device *, + __always_unused __be16 proto, u16); +static int igb_vlan_rx_kill_vid(struct net_device *, + __always_unused __be16 proto, u16); +#else +static int igb_vlan_rx_add_vid(struct net_device *, u16); +static int igb_vlan_rx_kill_vid(struct net_device *, u16); +#endif +#else +static void igb_vlan_rx_add_vid(struct net_device *, u16); +static void igb_vlan_rx_kill_vid(struct net_device *, u16); +#endif +static void igb_restore_vlan(struct igb_adapter *); +void igb_rar_set(struct igb_adapter *adapter, u32 index); +static void igb_ping_all_vfs(struct igb_adapter *); +static void igb_msg_task(struct igb_adapter *); +static void igb_vmm_control(struct igb_adapter *); +static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *); +static void igb_restore_vf_multicasts(struct igb_adapter *adapter); +static void igb_process_mdd_event(struct igb_adapter *); +#ifdef IFLA_VF_MAX +static int igb_ndo_set_vf_mac( struct net_device *netdev, int vf, u8 *mac); +static int igb_ndo_set_vf_vlan(struct net_device *netdev, +#ifdef HAVE_VF_VLAN_PROTO + int vf, u16 vlan, u8 qos, __be16 vlan_proto); +#else + int vf, u16 vlan, u8 qos); +#endif +#ifdef HAVE_VF_SPOOFCHK_CONFIGURE +static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, + bool setting); +#endif +#ifdef HAVE_VF_MIN_MAX_TXRATE +static int igb_ndo_set_vf_bw(struct net_device *, int, int, int); +#else /* HAVE_VF_MIN_MAX_TXRATE */ +static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate); +#endif /* HAVE_VF_MIN_MAX_TXRATE */ +static int igb_ndo_get_vf_config(struct net_device *netdev, int vf, + struct ifla_vf_info *ivi); +static void igb_check_vf_rate_limit(struct igb_adapter *); +#endif +static int igb_vf_configure(struct igb_adapter *adapter, int vf); +#ifdef CONFIG_PM +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS +static int igb_suspend(struct device *dev); +static int igb_resume(struct device *dev); +#ifdef CONFIG_PM_RUNTIME +static int igb_runtime_suspend(struct device *dev); +static int igb_runtime_resume(struct device *dev); +static int igb_runtime_idle(struct device *dev); +#endif /* CONFIG_PM_RUNTIME */ +static const struct dev_pm_ops igb_pm_ops = { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34) + .suspend = igb_suspend, + .resume = igb_resume, + .freeze = igb_suspend, + .thaw = igb_resume, + .poweroff = igb_suspend, + .restore = igb_resume, +#ifdef CONFIG_PM_RUNTIME + .runtime_suspend = igb_runtime_suspend, + .runtime_resume = igb_runtime_resume, + .runtime_idle = igb_runtime_idle, +#endif +#else /* Linux >= 2.6.34 */ + SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume) +#ifdef CONFIG_PM_RUNTIME + SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume, + igb_runtime_idle) +#endif /* CONFIG_PM_RUNTIME */ +#endif /* Linux version */ +}; +#else +static int igb_suspend(struct pci_dev *pdev, pm_message_t state); +static int igb_resume(struct pci_dev *pdev); +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ +#endif /* CONFIG_PM */ +#ifndef USE_REBOOT_NOTIFIER +static void igb_shutdown(struct pci_dev *); +#else +static int igb_notify_reboot(struct notifier_block *, unsigned long, void *); +static struct notifier_block igb_notifier_reboot = { + .notifier_call = igb_notify_reboot, + .next = NULL, + .priority = 0 +}; +#endif +#ifdef IGB_DCA +static int igb_notify_dca(struct notifier_block *, unsigned long, void *); +static struct notifier_block dca_notifier = { + .notifier_call = igb_notify_dca, + .next = NULL, + .priority = 0 +}; +#endif +#ifdef CONFIG_NET_POLL_CONTROLLER +/* for netdump / net console */ +static void igb_netpoll(struct net_device *); +#endif + +#ifdef HAVE_PCI_ERS +static pci_ers_result_t igb_io_error_detected(struct pci_dev *, + pci_channel_state_t); +static pci_ers_result_t igb_io_slot_reset(struct pci_dev *); +static void igb_io_resume(struct pci_dev *); + +static struct pci_error_handlers igb_err_handler = { + .error_detected = igb_io_error_detected, + .slot_reset = igb_io_slot_reset, + .resume = igb_io_resume, +}; +#endif + +static void igb_init_fw(struct igb_adapter *adapter); +static void igb_init_dmac(struct igb_adapter *adapter, u32 pba); + +static struct pci_driver igb_driver = { + .name = igb_driver_name, + .id_table = igb_pci_tbl, + .probe = igb_probe, + .remove = __devexit_p(igb_remove), +#ifdef CONFIG_PM +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS + .driver.pm = &igb_pm_ops, +#else + .suspend = igb_suspend, + .resume = igb_resume, +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ +#endif /* CONFIG_PM */ +#ifndef USE_REBOOT_NOTIFIER + .shutdown = igb_shutdown, +#endif +#ifdef HAVE_PCI_ERS + .err_handler = &igb_err_handler +#endif +}; + +//MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>"); +//MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver"); +//MODULE_LICENSE("GPL"); +//MODULE_VERSION(DRV_VERSION); + +static void igb_vfta_set(struct igb_adapter *adapter, u32 vid, bool add) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_host_mng_dhcp_cookie *mng_cookie = &hw->mng_cookie; + u32 index = (vid >> E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK; + u32 mask = 1 << (vid & E1000_VFTA_ENTRY_BIT_SHIFT_MASK); + u32 vfta; + + /* + * if this is the management vlan the only option is to add it in so + * that the management pass through will continue to work + */ + if ((mng_cookie->status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && + (vid == mng_cookie->vlan_id)) + add = TRUE; + + vfta = adapter->shadow_vfta[index]; + + if (add) + vfta |= mask; + else + vfta &= ~mask; + + e1000_write_vfta(hw, index, vfta); + adapter->shadow_vfta[index] = vfta; +} + +static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE; +//module_param(debug, int, 0); +//MODULE_PARM_DESC(debug, "Debug level (0=none, ..., 16=all)"); + +/** + * igb_init_module - Driver Registration Routine + * + * igb_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + **/ +static int __init igb_init_module(void) +{ + int ret; + + printk(KERN_INFO "%s - version %s\n", + igb_driver_string, igb_driver_version); + + printk(KERN_INFO "%s\n", igb_copyright); +#ifdef IGB_HWMON +/* only use IGB_PROCFS if IGB_HWMON is not defined */ +#else +#ifdef IGB_PROCFS + if (igb_procfs_topdir_init()) + printk(KERN_INFO "Procfs failed to initialize topdir\n"); +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ + +#ifdef IGB_DCA + dca_register_notify(&dca_notifier); +#endif + ret = pci_register_driver(&igb_driver); +#ifdef USE_REBOOT_NOTIFIER + if (ret >= 0) { + register_reboot_notifier(&igb_notifier_reboot); + } +#endif + return ret; +} + +#undef module_init +#define module_init(x) static int x(void) __attribute__((__unused__)); +module_init(igb_init_module); + +/** + * igb_exit_module - Driver Exit Cleanup Routine + * + * igb_exit_module is called just before the driver is removed + * from memory. + **/ +static void __exit igb_exit_module(void) +{ +#ifdef IGB_DCA + dca_unregister_notify(&dca_notifier); +#endif +#ifdef USE_REBOOT_NOTIFIER + unregister_reboot_notifier(&igb_notifier_reboot); +#endif + pci_unregister_driver(&igb_driver); + +#ifdef IGB_HWMON +/* only compile IGB_PROCFS if IGB_HWMON is not defined */ +#else +#ifdef IGB_PROCFS + igb_procfs_topdir_exit(); +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ +} + +#undef module_exit +#define module_exit(x) static void x(void) __attribute__((__unused__)); +module_exit(igb_exit_module); + +#define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1)) +/** + * igb_cache_ring_register - Descriptor ring to register mapping + * @adapter: board private structure to initialize + * + * Once we know the feature-set enabled for the device, we'll cache + * the register offset the descriptor ring is assigned to. + **/ +static void igb_cache_ring_register(struct igb_adapter *adapter) +{ + int i = 0, j = 0; + u32 rbase_offset = adapter->vfs_allocated_count; + + switch (adapter->hw.mac.type) { + case e1000_82576: + /* The queues are allocated for virtualization such that VF 0 + * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc. + * In order to avoid collision we start at the first free queue + * and continue consuming queues in the same sequence + */ + if ((adapter->rss_queues > 1) && adapter->vmdq_pools) { + for (; i < adapter->rss_queues; i++) + adapter->rx_ring[i]->reg_idx = rbase_offset + + Q_IDX_82576(i); + } + case e1000_82575: + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + default: + for (; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i]->reg_idx = rbase_offset + i; + for (; j < adapter->num_tx_queues; j++) + adapter->tx_ring[j]->reg_idx = rbase_offset + j; + break; + } +} + +static void igb_configure_lli(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u16 port; + + /* LLI should only be enabled for MSI-X or MSI interrupts */ + if (!adapter->msix_entries && !(adapter->flags & IGB_FLAG_HAS_MSI)) + return; + + if (adapter->lli_port) { + /* use filter 0 for port */ + port = htons((u16)adapter->lli_port); + E1000_WRITE_REG(hw, E1000_IMIR(0), + (port | E1000_IMIR_PORT_IM_EN)); + E1000_WRITE_REG(hw, E1000_IMIREXT(0), + (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP)); + } + + if (adapter->flags & IGB_FLAG_LLI_PUSH) { + /* use filter 1 for push flag */ + E1000_WRITE_REG(hw, E1000_IMIR(1), + (E1000_IMIR_PORT_BP | E1000_IMIR_PORT_IM_EN)); + E1000_WRITE_REG(hw, E1000_IMIREXT(1), + (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_PSH)); + } + + if (adapter->lli_size) { + /* use filter 2 for size */ + E1000_WRITE_REG(hw, E1000_IMIR(2), + (E1000_IMIR_PORT_BP | E1000_IMIR_PORT_IM_EN)); + E1000_WRITE_REG(hw, E1000_IMIREXT(2), + (adapter->lli_size | E1000_IMIREXT_CTRL_BP)); + } + +} + +/** + * igb_write_ivar - configure ivar for given MSI-X vector + * @hw: pointer to the HW structure + * @msix_vector: vector number we are allocating to a given ring + * @index: row index of IVAR register to write within IVAR table + * @offset: column offset of in IVAR, should be multiple of 8 + * + * This function is intended to handle the writing of the IVAR register + * for adapters 82576 and newer. The IVAR table consists of 2 columns, + * each containing an cause allocation for an Rx and Tx ring, and a + * variable number of rows depending on the number of queues supported. + **/ +static void igb_write_ivar(struct e1000_hw *hw, int msix_vector, + int index, int offset) +{ + u32 ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index); + + /* clear any bits that are currently set */ + ivar &= ~((u32)0xFF << offset); + + /* write vector and valid bit */ + ivar |= (msix_vector | E1000_IVAR_VALID) << offset; + + E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar); +} + +#define IGB_N0_QUEUE -1 +static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector) +{ + struct igb_adapter *adapter = q_vector->adapter; + struct e1000_hw *hw = &adapter->hw; + int rx_queue = IGB_N0_QUEUE; + int tx_queue = IGB_N0_QUEUE; + u32 msixbm = 0; + + if (q_vector->rx.ring) + rx_queue = q_vector->rx.ring->reg_idx; + if (q_vector->tx.ring) + tx_queue = q_vector->tx.ring->reg_idx; + + switch (hw->mac.type) { + case e1000_82575: + /* The 82575 assigns vectors using a bitmask, which matches the + bitmask for the EICR/EIMS/EIMC registers. To assign one + or more queues to a vector, we write the appropriate bits + into the MSIXBM register for that vector. */ + if (rx_queue > IGB_N0_QUEUE) + msixbm = E1000_EICR_RX_QUEUE0 << rx_queue; + if (tx_queue > IGB_N0_QUEUE) + msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue; + if (!adapter->msix_entries && msix_vector == 0) + msixbm |= E1000_EIMS_OTHER; + E1000_WRITE_REG_ARRAY(hw, E1000_MSIXBM(0), msix_vector, msixbm); + q_vector->eims_value = msixbm; + break; + case e1000_82576: + /* + * 82576 uses a table that essentially consists of 2 columns + * with 8 rows. The ordering is column-major so we use the + * lower 3 bits as the row index, and the 4th bit as the + * column offset. + */ + if (rx_queue > IGB_N0_QUEUE) + igb_write_ivar(hw, msix_vector, + rx_queue & 0x7, + (rx_queue & 0x8) << 1); + if (tx_queue > IGB_N0_QUEUE) + igb_write_ivar(hw, msix_vector, + tx_queue & 0x7, + ((tx_queue & 0x8) << 1) + 8); + q_vector->eims_value = 1 << msix_vector; + break; + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + /* + * On 82580 and newer adapters the scheme is similar to 82576 + * however instead of ordering column-major we have things + * ordered row-major. So we traverse the table by using + * bit 0 as the column offset, and the remaining bits as the + * row index. + */ + if (rx_queue > IGB_N0_QUEUE) + igb_write_ivar(hw, msix_vector, + rx_queue >> 1, + (rx_queue & 0x1) << 4); + if (tx_queue > IGB_N0_QUEUE) + igb_write_ivar(hw, msix_vector, + tx_queue >> 1, + ((tx_queue & 0x1) << 4) + 8); + q_vector->eims_value = 1 << msix_vector; + break; + default: + BUG(); + break; + } + + /* add q_vector eims value to global eims_enable_mask */ + adapter->eims_enable_mask |= q_vector->eims_value; + + /* configure q_vector to set itr on first interrupt */ + q_vector->set_itr = 1; +} + +/** + * igb_configure_msix - Configure MSI-X hardware + * + * igb_configure_msix sets up the hardware to properly + * generate MSI-X interrupts. + **/ +static void igb_configure_msix(struct igb_adapter *adapter) +{ + u32 tmp; + int i, vector = 0; + struct e1000_hw *hw = &adapter->hw; + + adapter->eims_enable_mask = 0; + + /* set vector for other causes, i.e. link changes */ + switch (hw->mac.type) { + case e1000_82575: + tmp = E1000_READ_REG(hw, E1000_CTRL_EXT); + /* enable MSI-X PBA support*/ + tmp |= E1000_CTRL_EXT_PBA_CLR; + + /* Auto-Mask interrupts upon ICR read. */ + tmp |= E1000_CTRL_EXT_EIAME; + tmp |= E1000_CTRL_EXT_IRCA; + + E1000_WRITE_REG(hw, E1000_CTRL_EXT, tmp); + + /* enable msix_other interrupt */ + E1000_WRITE_REG_ARRAY(hw, E1000_MSIXBM(0), vector++, + E1000_EIMS_OTHER); + adapter->eims_other = E1000_EIMS_OTHER; + + break; + + case e1000_82576: + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + /* Turn on MSI-X capability first, or our settings + * won't stick. And it will take days to debug. */ + E1000_WRITE_REG(hw, E1000_GPIE, E1000_GPIE_MSIX_MODE | + E1000_GPIE_PBA | E1000_GPIE_EIAME | + E1000_GPIE_NSICR); + + /* enable msix_other interrupt */ + adapter->eims_other = 1 << vector; + tmp = (vector++ | E1000_IVAR_VALID) << 8; + + E1000_WRITE_REG(hw, E1000_IVAR_MISC, tmp); + break; + default: + /* do nothing, since nothing else supports MSI-X */ + break; + } /* switch (hw->mac.type) */ + + adapter->eims_enable_mask |= adapter->eims_other; + + for (i = 0; i < adapter->num_q_vectors; i++) + igb_assign_vector(adapter->q_vector[i], vector++); + + E1000_WRITE_FLUSH(hw); +} + +/** + * igb_request_msix - Initialize MSI-X interrupts + * + * igb_request_msix allocates MSI-X vectors and requests interrupts from the + * kernel. + **/ +static int igb_request_msix(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + int i, err = 0, vector = 0, free_vector = 0; + + err = request_irq(adapter->msix_entries[vector].vector, + &igb_msix_other, 0, netdev->name, adapter); + if (err) + goto err_out; + + for (i = 0; i < adapter->num_q_vectors; i++) { + struct igb_q_vector *q_vector = adapter->q_vector[i]; + + vector++; + + q_vector->itr_register = hw->hw_addr + E1000_EITR(vector); + + if (q_vector->rx.ring && q_vector->tx.ring) + sprintf(q_vector->name, "%s-TxRx-%u", netdev->name, + q_vector->rx.ring->queue_index); + else if (q_vector->tx.ring) + sprintf(q_vector->name, "%s-tx-%u", netdev->name, + q_vector->tx.ring->queue_index); + else if (q_vector->rx.ring) + sprintf(q_vector->name, "%s-rx-%u", netdev->name, + q_vector->rx.ring->queue_index); + else + sprintf(q_vector->name, "%s-unused", netdev->name); + + err = request_irq(adapter->msix_entries[vector].vector, + igb_msix_ring, 0, q_vector->name, + q_vector); + if (err) + goto err_free; + } + + igb_configure_msix(adapter); + return 0; + +err_free: + /* free already assigned IRQs */ + free_irq(adapter->msix_entries[free_vector++].vector, adapter); + + vector--; + for (i = 0; i < vector; i++) { + free_irq(adapter->msix_entries[free_vector++].vector, + adapter->q_vector[i]); + } +err_out: + return err; +} + +static void igb_reset_interrupt_capability(struct igb_adapter *adapter) +{ + if (adapter->msix_entries) { + pci_disable_msix(adapter->pdev); + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + } else if (adapter->flags & IGB_FLAG_HAS_MSI) { + pci_disable_msi(adapter->pdev); + } +} + +/** + * igb_free_q_vector - Free memory allocated for specific interrupt vector + * @adapter: board private structure to initialize + * @v_idx: Index of vector to be freed + * + * This function frees the memory allocated to the q_vector. In addition if + * NAPI is enabled it will delete any references to the NAPI struct prior + * to freeing the q_vector. + **/ +static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx) +{ + struct igb_q_vector *q_vector = adapter->q_vector[v_idx]; + + if (q_vector->tx.ring) + adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL; + + if (q_vector->rx.ring) + adapter->tx_ring[q_vector->rx.ring->queue_index] = NULL; + + adapter->q_vector[v_idx] = NULL; + netif_napi_del(&q_vector->napi); +#ifndef IGB_NO_LRO + __skb_queue_purge(&q_vector->lrolist.active); +#endif + kfree(q_vector); +} + +/** + * igb_free_q_vectors - Free memory allocated for interrupt vectors + * @adapter: board private structure to initialize + * + * This function frees the memory allocated to the q_vectors. In addition if + * NAPI is enabled it will delete any references to the NAPI struct prior + * to freeing the q_vector. + **/ +static void igb_free_q_vectors(struct igb_adapter *adapter) +{ + int v_idx = adapter->num_q_vectors; + + adapter->num_tx_queues = 0; + adapter->num_rx_queues = 0; + adapter->num_q_vectors = 0; + + while (v_idx--) + igb_free_q_vector(adapter, v_idx); +} + +/** + * igb_clear_interrupt_scheme - reset the device to a state of no interrupts + * + * This function resets the device so that it has 0 rx queues, tx queues, and + * MSI-X interrupts allocated. + */ +static void igb_clear_interrupt_scheme(struct igb_adapter *adapter) +{ + igb_free_q_vectors(adapter); + igb_reset_interrupt_capability(adapter); +} + +/** + * igb_process_mdd_event + * @adapter - board private structure + * + * Identify a malicious VF, disable the VF TX/RX queues and log a message. + */ +static void igb_process_mdd_event(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 lvmmc, vfte, vfre, mdfb; + u8 vf_queue; + + lvmmc = E1000_READ_REG(hw, E1000_LVMMC); + vf_queue = lvmmc >> 29; + + /* VF index cannot be bigger or equal to VFs allocated */ + if (vf_queue >= adapter->vfs_allocated_count) + return; + + netdev_info(adapter->netdev, + "VF %d misbehaved. VF queues are disabled. " + "VM misbehavior code is 0x%x\n", vf_queue, lvmmc); + + /* Disable VFTE and VFRE related bits */ + vfte = E1000_READ_REG(hw, E1000_VFTE); + vfte &= ~(1 << vf_queue); + E1000_WRITE_REG(hw, E1000_VFTE, vfte); + + vfre = E1000_READ_REG(hw, E1000_VFRE); + vfre &= ~(1 << vf_queue); + E1000_WRITE_REG(hw, E1000_VFRE, vfre); + + /* Disable MDFB related bit. Clear on write */ + mdfb = E1000_READ_REG(hw, E1000_MDFB); + mdfb |= (1 << vf_queue); + E1000_WRITE_REG(hw, E1000_MDFB, mdfb); + + /* Reset the specific VF */ + E1000_WRITE_REG(hw, E1000_VTCTRL(vf_queue), E1000_VTCTRL_RST); +} + +/** + * igb_disable_mdd + * @adapter - board private structure + * + * Disable MDD behavior in the HW + **/ +static void igb_disable_mdd(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 reg; + + if ((hw->mac.type != e1000_i350) || + (hw->mac.type != e1000_i354)) + return; + + reg = E1000_READ_REG(hw, E1000_DTXCTL); + reg &= (~E1000_DTXCTL_MDP_EN); + E1000_WRITE_REG(hw, E1000_DTXCTL, reg); +} + +/** + * igb_enable_mdd + * @adapter - board private structure + * + * Enable the HW to detect malicious driver and sends an interrupt to + * the driver. + **/ +static void igb_enable_mdd(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 reg; + + /* Only available on i350 device */ + if (hw->mac.type != e1000_i350) + return; + + reg = E1000_READ_REG(hw, E1000_DTXCTL); + reg |= E1000_DTXCTL_MDP_EN; + E1000_WRITE_REG(hw, E1000_DTXCTL, reg); +} + +/** + * igb_reset_sriov_capability - disable SR-IOV if enabled + * + * Attempt to disable single root IO virtualization capabilites present in the + * kernel. + **/ +static void igb_reset_sriov_capability(struct igb_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct e1000_hw *hw = &adapter->hw; + + /* reclaim resources allocated to VFs */ + if (adapter->vf_data) { + if (!pci_vfs_assigned(pdev)) { + /* + * disable iov and allow time for transactions to + * clear + */ + pci_disable_sriov(pdev); + msleep(500); + + dev_info(pci_dev_to_dev(pdev), "IOV Disabled\n"); + } else { + dev_info(pci_dev_to_dev(pdev), "IOV Not Disabled\n " + "VF(s) are assigned to guests!\n"); + } + /* Disable Malicious Driver Detection */ + igb_disable_mdd(adapter); + + /* free vf data storage */ + kfree(adapter->vf_data); + adapter->vf_data = NULL; + + /* switch rings back to PF ownership */ + E1000_WRITE_REG(hw, E1000_IOVCTL, + E1000_IOVCTL_REUSE_VFQ); + E1000_WRITE_FLUSH(hw); + msleep(100); + } + + adapter->vfs_allocated_count = 0; +} + +/** + * igb_set_sriov_capability - setup SR-IOV if supported + * + * Attempt to enable single root IO virtualization capabilites present in the + * kernel. + **/ +static void igb_set_sriov_capability(struct igb_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + int old_vfs = 0; + int i; + + old_vfs = pci_num_vf(pdev); + if (old_vfs) { + dev_info(pci_dev_to_dev(pdev), + "%d pre-allocated VFs found - override " + "max_vfs setting of %d\n", old_vfs, + adapter->vfs_allocated_count); + adapter->vfs_allocated_count = old_vfs; + } + /* no VFs requested, do nothing */ + if (!adapter->vfs_allocated_count) + return; + + /* allocate vf data storage */ + adapter->vf_data = kcalloc(adapter->vfs_allocated_count, + sizeof(struct vf_data_storage), + GFP_KERNEL); + + if (adapter->vf_data) { + if (!old_vfs) { + if (pci_enable_sriov(pdev, + adapter->vfs_allocated_count)) + goto err_out; + } + for (i = 0; i < adapter->vfs_allocated_count; i++) + igb_vf_configure(adapter, i); + + switch (adapter->hw.mac.type) { + case e1000_82576: + case e1000_i350: + /* Enable VM to VM loopback by default */ + adapter->flags |= IGB_FLAG_LOOPBACK_ENABLE; + break; + default: + /* Currently no other hardware supports loopback */ + break; + } + + /* DMA Coalescing is not supported in IOV mode. */ + if (adapter->hw.mac.type >= e1000_i350) + adapter->dmac = IGB_DMAC_DISABLE; + if (adapter->hw.mac.type < e1000_i350) + adapter->flags |= IGB_FLAG_DETECT_BAD_DMA; + return; + + } + +err_out: + kfree(adapter->vf_data); + adapter->vf_data = NULL; + adapter->vfs_allocated_count = 0; + dev_warn(pci_dev_to_dev(pdev), + "Failed to initialize SR-IOV virtualization\n"); +} + +/** + * igb_set_interrupt_capability - set MSI or MSI-X if supported + * + * Attempt to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix) +{ + struct pci_dev *pdev = adapter->pdev; + int err; + int numvecs, i; + + if (!msix) + adapter->int_mode = IGB_INT_MODE_MSI; + + /* Number of supported queues. */ + adapter->num_rx_queues = adapter->rss_queues; + + if (adapter->vmdq_pools > 1) + adapter->num_rx_queues += adapter->vmdq_pools - 1; + +#ifdef HAVE_TX_MQ + if (adapter->vmdq_pools) + adapter->num_tx_queues = adapter->vmdq_pools; + else + adapter->num_tx_queues = adapter->num_rx_queues; +#else + adapter->num_tx_queues = max_t(u32, 1, adapter->vmdq_pools); +#endif + + switch (adapter->int_mode) { + case IGB_INT_MODE_MSIX: + /* start with one vector for every rx queue */ + numvecs = adapter->num_rx_queues; + + /* if tx handler is separate add 1 for every tx queue */ + if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) + numvecs += adapter->num_tx_queues; + + /* store the number of vectors reserved for queues */ + adapter->num_q_vectors = numvecs; + + /* add 1 vector for link status interrupts */ + numvecs++; + adapter->msix_entries = kcalloc(numvecs, + sizeof(struct msix_entry), + GFP_KERNEL); + if (adapter->msix_entries) { + for (i = 0; i < numvecs; i++) + adapter->msix_entries[i].entry = i; + +#ifdef HAVE_PCI_ENABLE_MSIX + err = pci_enable_msix(pdev, + adapter->msix_entries, numvecs); +#else + err = pci_enable_msix_range(pdev, + adapter->msix_entries, + numvecs, + numvecs); +#endif + if (err == 0) + break; + } + /* MSI-X failed, so fall through and try MSI */ + dev_warn(pci_dev_to_dev(pdev), "Failed to initialize MSI-X interrupts. " + "Falling back to MSI interrupts.\n"); + igb_reset_interrupt_capability(adapter); + case IGB_INT_MODE_MSI: + if (!pci_enable_msi(pdev)) + adapter->flags |= IGB_FLAG_HAS_MSI; + else + dev_warn(pci_dev_to_dev(pdev), "Failed to initialize MSI " + "interrupts. Falling back to legacy " + "interrupts.\n"); + /* Fall through */ + case IGB_INT_MODE_LEGACY: + /* disable advanced features and set number of queues to 1 */ + igb_reset_sriov_capability(adapter); + adapter->vmdq_pools = 0; + adapter->rss_queues = 1; + adapter->flags |= IGB_FLAG_QUEUE_PAIRS; + adapter->num_rx_queues = 1; + adapter->num_tx_queues = 1; + adapter->num_q_vectors = 1; + /* Don't do anything; this is system default */ + break; + } +} + +static void igb_add_ring(struct igb_ring *ring, + struct igb_ring_container *head) +{ + head->ring = ring; + head->count++; +} + +/** + * igb_alloc_q_vector - Allocate memory for a single interrupt vector + * @adapter: board private structure to initialize + * @v_count: q_vectors allocated on adapter, used for ring interleaving + * @v_idx: index of vector in adapter struct + * @txr_count: total number of Tx rings to allocate + * @txr_idx: index of first Tx ring to allocate + * @rxr_count: total number of Rx rings to allocate + * @rxr_idx: index of first Rx ring to allocate + * + * We allocate one q_vector. If allocation fails we return -ENOMEM. + **/ +static int igb_alloc_q_vector(struct igb_adapter *adapter, + unsigned int v_count, unsigned int v_idx, + unsigned int txr_count, unsigned int txr_idx, + unsigned int rxr_count, unsigned int rxr_idx) +{ + struct igb_q_vector *q_vector; + struct igb_ring *ring; + int ring_count, size; + + /* igb only supports 1 Tx and/or 1 Rx queue per vector */ + if (txr_count > 1 || rxr_count > 1) + return -ENOMEM; + + ring_count = txr_count + rxr_count; + size = sizeof(struct igb_q_vector) + + (sizeof(struct igb_ring) * ring_count); + + /* allocate q_vector and rings */ + q_vector = kzalloc(size, GFP_KERNEL); + if (!q_vector) + return -ENOMEM; + +#ifndef IGB_NO_LRO + /* initialize LRO */ + __skb_queue_head_init(&q_vector->lrolist.active); + +#endif + /* initialize NAPI */ + netif_napi_add(adapter->netdev, &q_vector->napi, + igb_poll, 64); + + /* tie q_vector and adapter together */ + adapter->q_vector[v_idx] = q_vector; + q_vector->adapter = adapter; + + /* initialize work limits */ + q_vector->tx.work_limit = adapter->tx_work_limit; + + /* initialize ITR configuration */ + q_vector->itr_register = adapter->hw.hw_addr + E1000_EITR(0); + q_vector->itr_val = IGB_START_ITR; + + /* initialize pointer to rings */ + ring = q_vector->ring; + + /* initialize ITR */ + if (rxr_count) { + /* rx or rx/tx vector */ + if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3) + q_vector->itr_val = adapter->rx_itr_setting; + } else { + /* tx only vector */ + if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3) + q_vector->itr_val = adapter->tx_itr_setting; + } + + if (txr_count) { + /* assign generic ring traits */ + ring->dev = &adapter->pdev->dev; + ring->netdev = adapter->netdev; + + /* configure backlink on ring */ + ring->q_vector = q_vector; + + /* update q_vector Tx values */ + igb_add_ring(ring, &q_vector->tx); + + /* For 82575, context index must be unique per ring. */ + if (adapter->hw.mac.type == e1000_82575) + set_bit(IGB_RING_FLAG_TX_CTX_IDX, &ring->flags); + + /* apply Tx specific ring traits */ + ring->count = adapter->tx_ring_count; + ring->queue_index = txr_idx; + + /* assign ring to adapter */ + adapter->tx_ring[txr_idx] = ring; + + /* push pointer to next ring */ + ring++; + } + + if (rxr_count) { + /* assign generic ring traits */ + ring->dev = &adapter->pdev->dev; + ring->netdev = adapter->netdev; + + /* configure backlink on ring */ + ring->q_vector = q_vector; + + /* update q_vector Rx values */ + igb_add_ring(ring, &q_vector->rx); + +#ifndef HAVE_NDO_SET_FEATURES + /* enable rx checksum */ + set_bit(IGB_RING_FLAG_RX_CSUM, &ring->flags); + +#endif + /* set flag indicating ring supports SCTP checksum offload */ + if (adapter->hw.mac.type >= e1000_82576) + set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags); + + if ((adapter->hw.mac.type == e1000_i350) || + (adapter->hw.mac.type == e1000_i354)) + set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags); + + /* apply Rx specific ring traits */ + ring->count = adapter->rx_ring_count; + ring->queue_index = rxr_idx; + + /* assign ring to adapter */ + adapter->rx_ring[rxr_idx] = ring; + } + + return 0; +} + +/** + * igb_alloc_q_vectors - Allocate memory for interrupt vectors + * @adapter: board private structure to initialize + * + * We allocate one q_vector per queue interrupt. If allocation fails we + * return -ENOMEM. + **/ +static int igb_alloc_q_vectors(struct igb_adapter *adapter) +{ + int q_vectors = adapter->num_q_vectors; + int rxr_remaining = adapter->num_rx_queues; + int txr_remaining = adapter->num_tx_queues; + int rxr_idx = 0, txr_idx = 0, v_idx = 0; + int err; + + if (q_vectors >= (rxr_remaining + txr_remaining)) { + for (; rxr_remaining; v_idx++) { + err = igb_alloc_q_vector(adapter, q_vectors, v_idx, + 0, 0, 1, rxr_idx); + + if (err) + goto err_out; + + /* update counts and index */ + rxr_remaining--; + rxr_idx++; + } + } + + for (; v_idx < q_vectors; v_idx++) { + int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx); + int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx); + err = igb_alloc_q_vector(adapter, q_vectors, v_idx, + tqpv, txr_idx, rqpv, rxr_idx); + + if (err) + goto err_out; + + /* update counts and index */ + rxr_remaining -= rqpv; + txr_remaining -= tqpv; + rxr_idx++; + txr_idx++; + } + + return 0; + +err_out: + adapter->num_tx_queues = 0; + adapter->num_rx_queues = 0; + adapter->num_q_vectors = 0; + + while (v_idx--) + igb_free_q_vector(adapter, v_idx); + + return -ENOMEM; +} + +/** + * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors + * + * This function initializes the interrupts and allocates all of the queues. + **/ +static int igb_init_interrupt_scheme(struct igb_adapter *adapter, bool msix) +{ + struct pci_dev *pdev = adapter->pdev; + int err; + + igb_set_interrupt_capability(adapter, msix); + + err = igb_alloc_q_vectors(adapter); + if (err) { + dev_err(pci_dev_to_dev(pdev), "Unable to allocate memory for vectors\n"); + goto err_alloc_q_vectors; + } + + igb_cache_ring_register(adapter); + + return 0; + +err_alloc_q_vectors: + igb_reset_interrupt_capability(adapter); + return err; +} + +/** + * igb_request_irq - initialize interrupts + * + * Attempts to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +static int igb_request_irq(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + int err = 0; + + if (adapter->msix_entries) { + err = igb_request_msix(adapter); + if (!err) + goto request_done; + /* fall back to MSI */ + igb_free_all_tx_resources(adapter); + igb_free_all_rx_resources(adapter); + + igb_clear_interrupt_scheme(adapter); + igb_reset_sriov_capability(adapter); + err = igb_init_interrupt_scheme(adapter, false); + if (err) + goto request_done; + igb_setup_all_tx_resources(adapter); + igb_setup_all_rx_resources(adapter); + igb_configure(adapter); + } + + igb_assign_vector(adapter->q_vector[0], 0); + + if (adapter->flags & IGB_FLAG_HAS_MSI) { + err = request_irq(pdev->irq, &igb_intr_msi, 0, + netdev->name, adapter); + if (!err) + goto request_done; + + /* fall back to legacy interrupts */ + igb_reset_interrupt_capability(adapter); + adapter->flags &= ~IGB_FLAG_HAS_MSI; + } + + err = request_irq(pdev->irq, &igb_intr, IRQF_SHARED, + netdev->name, adapter); + + if (err) + dev_err(pci_dev_to_dev(pdev), "Error %d getting interrupt\n", + err); + +request_done: + return err; +} + +static void igb_free_irq(struct igb_adapter *adapter) +{ + if (adapter->msix_entries) { + int vector = 0, i; + + free_irq(adapter->msix_entries[vector++].vector, adapter); + + for (i = 0; i < adapter->num_q_vectors; i++) + free_irq(adapter->msix_entries[vector++].vector, + adapter->q_vector[i]); + } else { + free_irq(adapter->pdev->irq, adapter); + } +} + +/** + * igb_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + **/ +static void igb_irq_disable(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + /* + * we need to be careful when disabling interrupts. The VFs are also + * mapped into these registers and so clearing the bits can cause + * issues on the VF drivers so we only need to clear what we set + */ + if (adapter->msix_entries) { + u32 regval = E1000_READ_REG(hw, E1000_EIAM); + E1000_WRITE_REG(hw, E1000_EIAM, regval & ~adapter->eims_enable_mask); + E1000_WRITE_REG(hw, E1000_EIMC, adapter->eims_enable_mask); + regval = E1000_READ_REG(hw, E1000_EIAC); + E1000_WRITE_REG(hw, E1000_EIAC, regval & ~adapter->eims_enable_mask); + } + + E1000_WRITE_REG(hw, E1000_IAM, 0); + E1000_WRITE_REG(hw, E1000_IMC, ~0); + E1000_WRITE_FLUSH(hw); + + if (adapter->msix_entries) { + int vector = 0, i; + + synchronize_irq(adapter->msix_entries[vector++].vector); + + for (i = 0; i < adapter->num_q_vectors; i++) + synchronize_irq(adapter->msix_entries[vector++].vector); + } else { + synchronize_irq(adapter->pdev->irq); + } +} + +/** + * igb_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + **/ +static void igb_irq_enable(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + if (adapter->msix_entries) { + u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_DRSTA; + u32 regval = E1000_READ_REG(hw, E1000_EIAC); + E1000_WRITE_REG(hw, E1000_EIAC, regval | adapter->eims_enable_mask); + regval = E1000_READ_REG(hw, E1000_EIAM); + E1000_WRITE_REG(hw, E1000_EIAM, regval | adapter->eims_enable_mask); + E1000_WRITE_REG(hw, E1000_EIMS, adapter->eims_enable_mask); + if (adapter->vfs_allocated_count) { + E1000_WRITE_REG(hw, E1000_MBVFIMR, 0xFF); + ims |= E1000_IMS_VMMB; + if (adapter->mdd) + if ((adapter->hw.mac.type == e1000_i350) || + (adapter->hw.mac.type == e1000_i354)) + ims |= E1000_IMS_MDDET; + } + E1000_WRITE_REG(hw, E1000_IMS, ims); + } else { + E1000_WRITE_REG(hw, E1000_IMS, IMS_ENABLE_MASK | + E1000_IMS_DRSTA); + E1000_WRITE_REG(hw, E1000_IAM, IMS_ENABLE_MASK | + E1000_IMS_DRSTA); + } +} + +static void igb_update_mng_vlan(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u16 vid = adapter->hw.mng_cookie.vlan_id; + u16 old_vid = adapter->mng_vlan_id; + + if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { + /* add VID to filter table */ + igb_vfta_set(adapter, vid, TRUE); + adapter->mng_vlan_id = vid; + } else { + adapter->mng_vlan_id = IGB_MNG_VLAN_NONE; + } + + if ((old_vid != (u16)IGB_MNG_VLAN_NONE) && + (vid != old_vid) && +#ifdef HAVE_VLAN_RX_REGISTER + !vlan_group_get_device(adapter->vlgrp, old_vid)) { +#else + !test_bit(old_vid, adapter->active_vlans)) { +#endif + /* remove VID from filter table */ + igb_vfta_set(adapter, old_vid, FALSE); + } +} + +/** + * igb_release_hw_control - release control of the h/w to f/w + * @adapter: address of board private structure + * + * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit. + * For ASF and Pass Through versions of f/w this means that the + * driver is no longer loaded. + * + **/ +static void igb_release_hw_control(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_ext; + + /* Let firmware take over control of h/w */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + E1000_WRITE_REG(hw, E1000_CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); +} + +/** + * igb_get_hw_control - get control of the h/w from f/w + * @adapter: address of board private structure + * + * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit. + * For ASF and Pass Through versions of f/w this means that + * the driver is loaded. + * + **/ +static void igb_get_hw_control(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_ext; + + /* Let firmware know the driver has taken over */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + E1000_WRITE_REG(hw, E1000_CTRL_EXT, + ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); +} + +/** + * igb_configure - configure the hardware for RX and TX + * @adapter: private board structure + **/ +static void igb_configure(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int i; + + igb_get_hw_control(adapter); + igb_set_rx_mode(netdev); + + igb_restore_vlan(adapter); + + igb_setup_tctl(adapter); + igb_setup_mrqc(adapter); + igb_setup_rctl(adapter); + + igb_configure_tx(adapter); + igb_configure_rx(adapter); + + e1000_rx_fifo_flush_82575(&adapter->hw); +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + if (adapter->num_tx_queues > 1) + netdev->features |= NETIF_F_MULTI_QUEUE; + else + netdev->features &= ~NETIF_F_MULTI_QUEUE; +#endif + + /* call igb_desc_unused which always leaves + * at least 1 descriptor unused to make sure + * next_to_use != next_to_clean */ + for (i = 0; i < adapter->num_rx_queues; i++) { + struct igb_ring *ring = adapter->rx_ring[i]; + igb_alloc_rx_buffers(ring, igb_desc_unused(ring)); + } +} + +/** + * igb_power_up_link - Power up the phy/serdes link + * @adapter: address of board private structure + **/ +void igb_power_up_link(struct igb_adapter *adapter) +{ + e1000_phy_hw_reset(&adapter->hw); + + if (adapter->hw.phy.media_type == e1000_media_type_copper) + e1000_power_up_phy(&adapter->hw); + else + e1000_power_up_fiber_serdes_link(&adapter->hw); +} + +/** + * igb_power_down_link - Power down the phy/serdes link + * @adapter: address of board private structure + */ +static void igb_power_down_link(struct igb_adapter *adapter) +{ + if (adapter->hw.phy.media_type == e1000_media_type_copper) + e1000_power_down_phy(&adapter->hw); + else + e1000_shutdown_fiber_serdes_link(&adapter->hw); +} + +/* Detect and switch function for Media Auto Sense */ +static void igb_check_swap_media(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_ext, connsw; + bool swap_now = false; + bool link; + + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + connsw = E1000_READ_REG(hw, E1000_CONNSW); + link = igb_has_link(adapter); + (void) link; + + /* need to live swap if current media is copper and we have fiber/serdes + * to go to. + */ + + if ((hw->phy.media_type == e1000_media_type_copper) && + (!(connsw & E1000_CONNSW_AUTOSENSE_EN))) { + swap_now = true; + } else if (!(connsw & E1000_CONNSW_SERDESD)) { + /* copper signal takes time to appear */ + if (adapter->copper_tries < 2) { + adapter->copper_tries++; + connsw |= E1000_CONNSW_AUTOSENSE_CONF; + E1000_WRITE_REG(hw, E1000_CONNSW, connsw); + return; + } else { + adapter->copper_tries = 0; + if ((connsw & E1000_CONNSW_PHYSD) && + (!(connsw & E1000_CONNSW_PHY_PDN))) { + swap_now = true; + connsw &= ~E1000_CONNSW_AUTOSENSE_CONF; + E1000_WRITE_REG(hw, E1000_CONNSW, connsw); + } + } + } + + if (swap_now) { + switch (hw->phy.media_type) { + case e1000_media_type_copper: + dev_info(pci_dev_to_dev(adapter->pdev), + "%s:MAS: changing media to fiber/serdes\n", + adapter->netdev->name); + ctrl_ext |= + E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; + adapter->flags |= IGB_FLAG_MEDIA_RESET; + adapter->copper_tries = 0; + break; + case e1000_media_type_internal_serdes: + case e1000_media_type_fiber: + dev_info(pci_dev_to_dev(adapter->pdev), + "%s:MAS: changing media to copper\n", + adapter->netdev->name); + ctrl_ext &= + ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; + adapter->flags |= IGB_FLAG_MEDIA_RESET; + break; + default: + /* shouldn't get here during regular operation */ + dev_err(pci_dev_to_dev(adapter->pdev), + "%s:AMS: Invalid media type found, returning\n", + adapter->netdev->name); + break; + } + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + } +} + +#ifdef HAVE_I2C_SUPPORT +/* igb_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Returns the I2C data bit value + */ +static int igb_get_i2c_data(void *data) +{ + struct igb_adapter *adapter = data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + return (i2cctl & E1000_I2C_DATA_IN) != 0; +} + +/* igb_set_i2c_data - Sets the I2C data bit + * @data: pointer to hardware structure + * @state: I2C data value (0 or 1) to set + * + * Sets the I2C data bit + */ +static void igb_set_i2c_data(void *data, int state) +{ + struct igb_adapter *adapter = data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + if (state) + i2cctl |= E1000_I2C_DATA_OUT; + else + i2cctl &= ~E1000_I2C_DATA_OUT; + + i2cctl &= ~E1000_I2C_DATA_OE_N; + i2cctl |= E1000_I2C_CLK_OE_N; + + E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); + E1000_WRITE_FLUSH(hw); + +} + +/* igb_set_i2c_clk - Sets the I2C SCL clock + * @data: pointer to hardware structure + * @state: state to set clock + * + * Sets the I2C clock line to state + */ +static void igb_set_i2c_clk(void *data, int state) +{ + struct igb_adapter *adapter = data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + if (state) { + i2cctl |= E1000_I2C_CLK_OUT; + i2cctl &= ~E1000_I2C_CLK_OE_N; + } else { + i2cctl &= ~E1000_I2C_CLK_OUT; + i2cctl &= ~E1000_I2C_CLK_OE_N; + } + E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); + E1000_WRITE_FLUSH(hw); +} + +/* igb_get_i2c_clk - Gets the I2C SCL clock state + * @data: pointer to hardware structure + * + * Gets the I2C clock state + */ +static int igb_get_i2c_clk(void *data) +{ + struct igb_adapter *adapter = data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + return (i2cctl & E1000_I2C_CLK_IN) != 0; +} + +static const struct i2c_algo_bit_data igb_i2c_algo = { + .setsda = igb_set_i2c_data, + .setscl = igb_set_i2c_clk, + .getsda = igb_get_i2c_data, + .getscl = igb_get_i2c_clk, + .udelay = 5, + .timeout = 20, +}; + +/* igb_init_i2c - Init I2C interface + * @adapter: pointer to adapter structure + * + */ +static s32 igb_init_i2c(struct igb_adapter *adapter) +{ + s32 status = E1000_SUCCESS; + + /* I2C interface supported on i350 devices */ + if (adapter->hw.mac.type != e1000_i350) + return E1000_SUCCESS; + + /* Initialize the i2c bus which is controlled by the registers. + * This bus will use the i2c_algo_bit structue that implements + * the protocol through toggling of the 4 bits in the register. + */ + adapter->i2c_adap.owner = THIS_MODULE; + adapter->i2c_algo = igb_i2c_algo; + adapter->i2c_algo.data = adapter; + adapter->i2c_adap.algo_data = &adapter->i2c_algo; + adapter->i2c_adap.dev.parent = &adapter->pdev->dev; + strlcpy(adapter->i2c_adap.name, "igb BB", + sizeof(adapter->i2c_adap.name)); + status = i2c_bit_add_bus(&adapter->i2c_adap); + return status; +} + +#endif /* HAVE_I2C_SUPPORT */ +/** + * igb_up - Open the interface and prepare it to handle traffic + * @adapter: board private structure + **/ +int igb_up(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + + /* hardware has been reset, we need to reload some things */ + igb_configure(adapter); + + clear_bit(__IGB_DOWN, &adapter->state); + + for (i = 0; i < adapter->num_q_vectors; i++) + napi_enable(&(adapter->q_vector[i]->napi)); + + if (adapter->msix_entries) + igb_configure_msix(adapter); + else + igb_assign_vector(adapter->q_vector[0], 0); + + igb_configure_lli(adapter); + + /* Clear any pending interrupts. */ + E1000_READ_REG(hw, E1000_ICR); + igb_irq_enable(adapter); + + /* notify VFs that reset has been completed */ + if (adapter->vfs_allocated_count) { + u32 reg_data = E1000_READ_REG(hw, E1000_CTRL_EXT); + reg_data |= E1000_CTRL_EXT_PFRSTD; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg_data); + } + + netif_tx_start_all_queues(adapter->netdev); + + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + schedule_work(&adapter->dma_err_task); + /* start the watchdog. */ + hw->mac.get_link_status = 1; + schedule_work(&adapter->watchdog_task); + + if ((adapter->flags & IGB_FLAG_EEE) && + (!hw->dev_spec._82575.eee_disable)) + adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T; + + return 0; +} + +void igb_down(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + u32 tctl, rctl; + int i; + + /* signal that we're down so the interrupt handler does not + * reschedule our watchdog timer */ + set_bit(__IGB_DOWN, &adapter->state); + + /* disable receives in the hardware */ + rctl = E1000_READ_REG(hw, E1000_RCTL); + E1000_WRITE_REG(hw, E1000_RCTL, rctl & ~E1000_RCTL_EN); + /* flush and sleep below */ + + netif_tx_stop_all_queues(netdev); + + /* disable transmits in the hardware */ + tctl = E1000_READ_REG(hw, E1000_TCTL); + tctl &= ~E1000_TCTL_EN; + E1000_WRITE_REG(hw, E1000_TCTL, tctl); + /* flush both disables and wait for them to finish */ + E1000_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + for (i = 0; i < adapter->num_q_vectors; i++) + napi_disable(&(adapter->q_vector[i]->napi)); + + igb_irq_disable(adapter); + + adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; + + del_timer_sync(&adapter->watchdog_timer); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + del_timer_sync(&adapter->dma_err_timer); + del_timer_sync(&adapter->phy_info_timer); + + netif_carrier_off(netdev); + + /* record the stats before reset*/ + igb_update_stats(adapter); + + adapter->link_speed = 0; + adapter->link_duplex = 0; + +#ifdef HAVE_PCI_ERS + if (!pci_channel_offline(adapter->pdev)) + igb_reset(adapter); +#else + igb_reset(adapter); +#endif + igb_clean_all_tx_rings(adapter); + igb_clean_all_rx_rings(adapter); +#ifdef IGB_DCA + /* since we reset the hardware DCA settings were cleared */ + igb_setup_dca(adapter); +#endif +} + +void igb_reinit_locked(struct igb_adapter *adapter) +{ + WARN_ON(in_interrupt()); + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + igb_down(adapter); + igb_up(adapter); + clear_bit(__IGB_RESETTING, &adapter->state); +} + +/** + * igb_enable_mas - Media Autosense re-enable after swap + * + * @adapter: adapter struct + **/ +static s32 igb_enable_mas(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 connsw; + s32 ret_val = E1000_SUCCESS; + + connsw = E1000_READ_REG(hw, E1000_CONNSW); + if (hw->phy.media_type == e1000_media_type_copper) { + /* configure for SerDes media detect */ + if (!(connsw & E1000_CONNSW_SERDESD)) { + connsw |= E1000_CONNSW_ENRGSRC; + connsw |= E1000_CONNSW_AUTOSENSE_EN; + E1000_WRITE_REG(hw, E1000_CONNSW, connsw); + E1000_WRITE_FLUSH(hw); + } else if (connsw & E1000_CONNSW_SERDESD) { + /* already SerDes, no need to enable anything */ + return ret_val; + } else { + dev_info(pci_dev_to_dev(adapter->pdev), + "%s:MAS: Unable to configure feature, disabling..\n", + adapter->netdev->name); + adapter->flags &= ~IGB_FLAG_MAS_ENABLE; + } + } + return ret_val; +} + +void igb_reset(struct igb_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct e1000_hw *hw = &adapter->hw; + struct e1000_mac_info *mac = &hw->mac; + struct e1000_fc_info *fc = &hw->fc; + u32 pba = 0, tx_space, min_tx_space, min_rx_space, hwm; + + /* Repartition Pba for greater than 9k mtu + * To take effect CTRL.RST is required. + */ + switch (mac->type) { + case e1000_i350: + case e1000_82580: + case e1000_i354: + pba = E1000_READ_REG(hw, E1000_RXPBS); + pba = e1000_rxpbs_adjust_82580(pba); + break; + case e1000_82576: + pba = E1000_READ_REG(hw, E1000_RXPBS); + pba &= E1000_RXPBS_SIZE_MASK_82576; + break; + case e1000_82575: + case e1000_i210: + case e1000_i211: + default: + pba = E1000_PBA_34K; + break; + } + + if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) && + (mac->type < e1000_82576)) { + /* adjust PBA for jumbo frames */ + E1000_WRITE_REG(hw, E1000_PBA, pba); + + /* To maintain wire speed transmits, the Tx FIFO should be + * large enough to accommodate two full transmit packets, + * rounded up to the next 1KB and expressed in KB. Likewise, + * the Rx FIFO should be large enough to accommodate at least + * one full receive packet and is similarly rounded up and + * expressed in KB. */ + pba = E1000_READ_REG(hw, E1000_PBA); + /* upper 16 bits has Tx packet buffer allocation size in KB */ + tx_space = pba >> 16; + /* lower 16 bits has Rx packet buffer allocation size in KB */ + pba &= 0xffff; + /* the tx fifo also stores 16 bytes of information about the tx + * but don't include ethernet FCS because hardware appends it */ + min_tx_space = (adapter->max_frame_size + + sizeof(union e1000_adv_tx_desc) - + ETH_FCS_LEN) * 2; + min_tx_space = ALIGN(min_tx_space, 1024); + min_tx_space >>= 10; + /* software strips receive CRC, so leave room for it */ + min_rx_space = adapter->max_frame_size; + min_rx_space = ALIGN(min_rx_space, 1024); + min_rx_space >>= 10; + + /* If current Tx allocation is less than the min Tx FIFO size, + * and the min Tx FIFO size is less than the current Rx FIFO + * allocation, take space away from current Rx allocation */ + if (tx_space < min_tx_space && + ((min_tx_space - tx_space) < pba)) { + pba = pba - (min_tx_space - tx_space); + + /* if short on rx space, rx wins and must trump tx + * adjustment */ + if (pba < min_rx_space) + pba = min_rx_space; + } + E1000_WRITE_REG(hw, E1000_PBA, pba); + } + + /* flow control settings */ + /* The high water mark must be low enough to fit one full frame + * (or the size used for early receive) above it in the Rx FIFO. + * Set it to the lower of: + * - 90% of the Rx FIFO size, or + * - the full Rx FIFO size minus one full frame */ + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - 2 * adapter->max_frame_size)); + + fc->high_water = hwm & 0xFFFFFFF0; /* 16-byte granularity */ + fc->low_water = fc->high_water - 16; + fc->pause_time = 0xFFFF; + fc->send_xon = 1; + fc->current_mode = fc->requested_mode; + + /* disable receive for all VFs and wait one second */ + if (adapter->vfs_allocated_count) { + int i; + /* + * Clear all flags except indication that the PF has set + * the VF MAC addresses administratively + */ + for (i = 0 ; i < adapter->vfs_allocated_count; i++) + adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC; + + /* ping all the active vfs to let them know we are going down */ + igb_ping_all_vfs(adapter); + + /* disable transmits and receives */ + E1000_WRITE_REG(hw, E1000_VFRE, 0); + E1000_WRITE_REG(hw, E1000_VFTE, 0); + } + + /* Allow time for pending master requests to run */ + e1000_reset_hw(hw); + E1000_WRITE_REG(hw, E1000_WUC, 0); + + if (adapter->flags & IGB_FLAG_MEDIA_RESET) { + e1000_setup_init_funcs(hw, TRUE); + igb_check_options(adapter); + e1000_get_bus_info(hw); + adapter->flags &= ~IGB_FLAG_MEDIA_RESET; + } + if (adapter->flags & IGB_FLAG_MAS_ENABLE) { + if (igb_enable_mas(adapter)) + dev_err(pci_dev_to_dev(pdev), + "Error enabling Media Auto Sense\n"); + } + if (e1000_init_hw(hw)) + dev_err(pci_dev_to_dev(pdev), "Hardware Error\n"); + + /* + * Flow control settings reset on hardware reset, so guarantee flow + * control is off when forcing speed. + */ + if (!hw->mac.autoneg) + e1000_force_mac_fc(hw); + + igb_init_dmac(adapter, pba); + /* Re-initialize the thermal sensor on i350 devices. */ + if (mac->type == e1000_i350 && hw->bus.func == 0) { + /* + * If present, re-initialize the external thermal sensor + * interface. + */ + if (adapter->ets) + e1000_set_i2c_bb(hw); + e1000_init_thermal_sensor_thresh(hw); + } + + /*Re-establish EEE setting */ + if (hw->phy.media_type == e1000_media_type_copper) { + switch (mac->type) { + case e1000_i350: + case e1000_i210: + case e1000_i211: + e1000_set_eee_i350(hw); + break; + case e1000_i354: + e1000_set_eee_i354(hw); + break; + default: + break; + } + } + + if (!netif_running(adapter->netdev)) + igb_power_down_link(adapter); + + igb_update_mng_vlan(adapter); + + /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ + E1000_WRITE_REG(hw, E1000_VET, ETHERNET_IEEE_VLAN_TYPE); + + +#ifdef HAVE_PTP_1588_CLOCK + /* Re-enable PTP, where applicable. */ + igb_ptp_reset(adapter); +#endif /* HAVE_PTP_1588_CLOCK */ + + e1000_get_phy_info(hw); + + adapter->devrc++; +} + +#ifdef HAVE_NDO_SET_FEATURES +static kni_netdev_features_t igb_fix_features(struct net_device *netdev, + kni_netdev_features_t features) +{ + /* + * Since there is no support for separate tx vlan accel + * enabled make sure tx flag is cleared if rx is. + */ +#ifdef NETIF_F_HW_VLAN_CTAG_RX + if (!(features & NETIF_F_HW_VLAN_CTAG_RX)) + features &= ~NETIF_F_HW_VLAN_CTAG_TX; +#else + if (!(features & NETIF_F_HW_VLAN_RX)) + features &= ~NETIF_F_HW_VLAN_TX; +#endif + + /* If Rx checksum is disabled, then LRO should also be disabled */ + if (!(features & NETIF_F_RXCSUM)) + features &= ~NETIF_F_LRO; + + return features; +} + +static int igb_set_features(struct net_device *netdev, + kni_netdev_features_t features) +{ + u32 changed = netdev->features ^ features; + +#ifdef NETIF_F_HW_VLAN_CTAG_RX + if (changed & NETIF_F_HW_VLAN_CTAG_RX) +#else + if (changed & NETIF_F_HW_VLAN_RX) +#endif + igb_vlan_mode(netdev, features); + + return 0; +} + +#ifdef NTF_SELF +#ifdef USE_CONST_DEV_UC_CHAR +static int igb_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], + struct net_device *dev, + const unsigned char *addr, +#ifdef HAVE_NDO_FDB_ADD_VID + u16 vid, +#endif + u16 flags) +#else +static int igb_ndo_fdb_add(struct ndmsg *ndm, + struct net_device *dev, + unsigned char *addr, + u16 flags) +#endif +{ + struct igb_adapter *adapter = netdev_priv(dev); + struct e1000_hw *hw = &adapter->hw; + int err; + + if (!(adapter->vfs_allocated_count)) + return -EOPNOTSUPP; + + /* Hardware does not support aging addresses so if a + * ndm_state is given only allow permanent addresses + */ + if (ndm->ndm_state && !(ndm->ndm_state & NUD_PERMANENT)) { + pr_info("%s: FDB only supports static addresses\n", + igb_driver_name); + return -EINVAL; + } + + if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr)) { + u32 rar_uc_entries = hw->mac.rar_entry_count - + (adapter->vfs_allocated_count + 1); + + if (netdev_uc_count(dev) < rar_uc_entries) + err = dev_uc_add_excl(dev, addr); + else + err = -ENOMEM; + } else if (is_multicast_ether_addr(addr)) { + err = dev_mc_add_excl(dev, addr); + } else { + err = -EINVAL; + } + + /* Only return duplicate errors if NLM_F_EXCL is set */ + if (err == -EEXIST && !(flags & NLM_F_EXCL)) + err = 0; + + return err; +} + +#ifndef USE_DEFAULT_FDB_DEL_DUMP +#ifdef USE_CONST_DEV_UC_CHAR +static int igb_ndo_fdb_del(struct ndmsg *ndm, + struct net_device *dev, + const unsigned char *addr) +#else +static int igb_ndo_fdb_del(struct ndmsg *ndm, + struct net_device *dev, + unsigned char *addr) +#endif +{ + struct igb_adapter *adapter = netdev_priv(dev); + int err = -EOPNOTSUPP; + + if (ndm->ndm_state & NUD_PERMANENT) { + pr_info("%s: FDB only supports static addresses\n", + igb_driver_name); + return -EINVAL; + } + + if (adapter->vfs_allocated_count) { + if (is_unicast_ether_addr(addr)) + err = dev_uc_del(dev, addr); + else if (is_multicast_ether_addr(addr)) + err = dev_mc_del(dev, addr); + else + err = -EINVAL; + } + + return err; +} + +static int igb_ndo_fdb_dump(struct sk_buff *skb, + struct netlink_callback *cb, + struct net_device *dev, + int idx) +{ + struct igb_adapter *adapter = netdev_priv(dev); + + if (adapter->vfs_allocated_count) + idx = ndo_dflt_fdb_dump(skb, cb, dev, idx); + + return idx; +} +#endif /* USE_DEFAULT_FDB_DEL_DUMP */ + +#ifdef HAVE_BRIDGE_ATTRIBS +#ifdef HAVE_NDO_BRIDGE_SET_DEL_LINK_FLAGS +static int igb_ndo_bridge_setlink(struct net_device *dev, + struct nlmsghdr *nlh, + u16 flags) +#else +static int igb_ndo_bridge_setlink(struct net_device *dev, + struct nlmsghdr *nlh) +#endif /* HAVE_NDO_BRIDGE_SET_DEL_LINK_FLAGS */ +{ + struct igb_adapter *adapter = netdev_priv(dev); + struct e1000_hw *hw = &adapter->hw; + struct nlattr *attr, *br_spec; + int rem; + + if (!(adapter->vfs_allocated_count)) + return -EOPNOTSUPP; + + switch (adapter->hw.mac.type) { + case e1000_82576: + case e1000_i350: + case e1000_i354: + break; + default: + return -EOPNOTSUPP; + } + + br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); + + nla_for_each_nested(attr, br_spec, rem) { + __u16 mode; + + if (nla_type(attr) != IFLA_BRIDGE_MODE) + continue; + + mode = nla_get_u16(attr); + if (mode == BRIDGE_MODE_VEPA) { + e1000_vmdq_set_loopback_pf(hw, 0); + adapter->flags &= ~IGB_FLAG_LOOPBACK_ENABLE; + } else if (mode == BRIDGE_MODE_VEB) { + e1000_vmdq_set_loopback_pf(hw, 1); + adapter->flags |= IGB_FLAG_LOOPBACK_ENABLE; + } else + return -EINVAL; + + netdev_info(adapter->netdev, "enabling bridge mode: %s\n", + mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); + } + + return 0; +} + +#ifdef HAVE_BRIDGE_FILTER +#ifdef HAVE_NDO_BRIDGE_GETLINK_NLFLAGS +static int igb_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, + struct net_device *dev, u32 filter_mask, + int nlflags) +#else +static int igb_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, + struct net_device *dev, u32 filter_mask) +#endif /* HAVE_NDO_BRIDGE_GETLINK_NLFLAGS */ +#else +static int igb_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, + struct net_device *dev) +#endif +{ + struct igb_adapter *adapter = netdev_priv(dev); + u16 mode; + + if (!(adapter->vfs_allocated_count)) + return -EOPNOTSUPP; + + if (adapter->flags & IGB_FLAG_LOOPBACK_ENABLE) + mode = BRIDGE_MODE_VEB; + else + mode = BRIDGE_MODE_VEPA; + +#ifdef HAVE_NDO_DFLT_BRIDGE_ADD_MASK +#ifdef HAVE_NDO_BRIDGE_GETLINK_NLFLAGS +#ifdef HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL + return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0, + nlflags, filter_mask, NULL); +#else + return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0, nlflags); +#endif /* HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL */ +#else + return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0); +#endif /* HAVE_NDO_BRIDGE_GETLINK_NLFLAGS */ +#else + return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode); +#endif /* HAVE_NDO_DFLT_BRIDGE_ADD_MASK */ +} +#endif /* HAVE_BRIDGE_ATTRIBS */ +#endif /* NTF_SELF */ + +#endif /* HAVE_NDO_SET_FEATURES */ +#ifdef HAVE_NET_DEVICE_OPS +static const struct net_device_ops igb_netdev_ops = { + .ndo_open = igb_open, + .ndo_stop = igb_close, + .ndo_start_xmit = igb_xmit_frame, + .ndo_get_stats = igb_get_stats, + .ndo_set_rx_mode = igb_set_rx_mode, + .ndo_set_mac_address = igb_set_mac, + .ndo_change_mtu = igb_change_mtu, + .ndo_do_ioctl = igb_ioctl, + .ndo_tx_timeout = igb_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_vlan_rx_add_vid = igb_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = igb_vlan_rx_kill_vid, +#ifdef IFLA_VF_MAX + .ndo_set_vf_mac = igb_ndo_set_vf_mac, + .ndo_set_vf_vlan = igb_ndo_set_vf_vlan, +#ifdef HAVE_VF_MIN_MAX_TXRATE + .ndo_set_vf_rate = igb_ndo_set_vf_bw, +#else /* HAVE_VF_MIN_MAX_TXRATE */ + .ndo_set_vf_tx_rate = igb_ndo_set_vf_bw, +#endif /* HAVE_VF_MIN_MAX_TXRATE */ + .ndo_get_vf_config = igb_ndo_get_vf_config, +#ifdef HAVE_VF_SPOOFCHK_CONFIGURE + .ndo_set_vf_spoofchk = igb_ndo_set_vf_spoofchk, +#endif /* HAVE_VF_SPOOFCHK_CONFIGURE */ +#endif /* IFLA_VF_MAX */ +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = igb_netpoll, +#endif +#ifdef HAVE_NDO_SET_FEATURES + .ndo_fix_features = igb_fix_features, + .ndo_set_features = igb_set_features, +#endif +#ifdef HAVE_VLAN_RX_REGISTER + .ndo_vlan_rx_register = igb_vlan_mode, +#endif +#ifndef HAVE_RHEL6_NETDEV_OPS_EXT_FDB +#ifdef NTF_SELF + .ndo_fdb_add = igb_ndo_fdb_add, +#ifndef USE_DEFAULT_FDB_DEL_DUMP + .ndo_fdb_del = igb_ndo_fdb_del, + .ndo_fdb_dump = igb_ndo_fdb_dump, +#endif +#endif /* ! HAVE_RHEL6_NETDEV_OPS_EXT_FDB */ +#ifdef HAVE_BRIDGE_ATTRIBS + .ndo_bridge_setlink = igb_ndo_bridge_setlink, + .ndo_bridge_getlink = igb_ndo_bridge_getlink, +#endif /* HAVE_BRIDGE_ATTRIBS */ +#endif +}; + +#ifdef CONFIG_IGB_VMDQ_NETDEV +static const struct net_device_ops igb_vmdq_ops = { + .ndo_open = &igb_vmdq_open, + .ndo_stop = &igb_vmdq_close, + .ndo_start_xmit = &igb_vmdq_xmit_frame, + .ndo_get_stats = &igb_vmdq_get_stats, + .ndo_set_rx_mode = &igb_vmdq_set_rx_mode, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = &igb_vmdq_set_mac, + .ndo_change_mtu = &igb_vmdq_change_mtu, + .ndo_tx_timeout = &igb_vmdq_tx_timeout, + .ndo_vlan_rx_register = &igb_vmdq_vlan_rx_register, + .ndo_vlan_rx_add_vid = &igb_vmdq_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = &igb_vmdq_vlan_rx_kill_vid, +}; + +#endif /* CONFIG_IGB_VMDQ_NETDEV */ +#endif /* HAVE_NET_DEVICE_OPS */ +#ifdef CONFIG_IGB_VMDQ_NETDEV +void igb_assign_vmdq_netdev_ops(struct net_device *vnetdev) +{ +#ifdef HAVE_NET_DEVICE_OPS + vnetdev->netdev_ops = &igb_vmdq_ops; +#else + dev->open = &igb_vmdq_open; + dev->stop = &igb_vmdq_close; + dev->hard_start_xmit = &igb_vmdq_xmit_frame; + dev->get_stats = &igb_vmdq_get_stats; +#ifdef HAVE_SET_RX_MODE + dev->set_rx_mode = &igb_vmdq_set_rx_mode; +#endif + dev->set_multicast_list = &igb_vmdq_set_rx_mode; + dev->set_mac_address = &igb_vmdq_set_mac; + dev->change_mtu = &igb_vmdq_change_mtu; +#ifdef HAVE_TX_TIMEOUT + dev->tx_timeout = &igb_vmdq_tx_timeout; +#endif +#if defined(NETIF_F_HW_VLAN_TX) || defined(NETIF_F_HW_VLAN_CTAG_TX) + dev->vlan_rx_register = &igb_vmdq_vlan_rx_register; + dev->vlan_rx_add_vid = &igb_vmdq_vlan_rx_add_vid; + dev->vlan_rx_kill_vid = &igb_vmdq_vlan_rx_kill_vid; +#endif +#endif + igb_vmdq_set_ethtool_ops(vnetdev); + vnetdev->watchdog_timeo = 5 * HZ; + +} + +int igb_init_vmdq_netdevs(struct igb_adapter *adapter) +{ + int pool, err = 0, base_queue; + struct net_device *vnetdev; + struct igb_vmdq_adapter *vmdq_adapter; + + for (pool = 1; pool < adapter->vmdq_pools; pool++) { + int qpp = (!adapter->rss_queues ? 1 : adapter->rss_queues); + base_queue = pool * qpp; + vnetdev = alloc_etherdev(sizeof(struct igb_vmdq_adapter)); + if (!vnetdev) { + err = -ENOMEM; + break; + } + vmdq_adapter = netdev_priv(vnetdev); + vmdq_adapter->vnetdev = vnetdev; + vmdq_adapter->real_adapter = adapter; + vmdq_adapter->rx_ring = adapter->rx_ring[base_queue]; + vmdq_adapter->tx_ring = adapter->tx_ring[base_queue]; + igb_assign_vmdq_netdev_ops(vnetdev); + snprintf(vnetdev->name, IFNAMSIZ, "%sv%d", + adapter->netdev->name, pool); + vnetdev->features = adapter->netdev->features; +#ifdef HAVE_NETDEV_VLAN_FEATURES + vnetdev->vlan_features = adapter->netdev->vlan_features; +#endif + adapter->vmdq_netdev[pool-1] = vnetdev; + err = register_netdev(vnetdev); + if (err) + break; + } + return err; +} + +int igb_remove_vmdq_netdevs(struct igb_adapter *adapter) +{ + int pool, err = 0; + + for (pool = 1; pool < adapter->vmdq_pools; pool++) { + unregister_netdev(adapter->vmdq_netdev[pool-1]); + free_netdev(adapter->vmdq_netdev[pool-1]); + adapter->vmdq_netdev[pool-1] = NULL; + } + return err; +} +#endif /* CONFIG_IGB_VMDQ_NETDEV */ + +/** + * igb_set_fw_version - Configure version string for ethtool + * @adapter: adapter struct + * + **/ +static void igb_set_fw_version(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_fw_version fw; + + e1000_get_fw_version(hw, &fw); + + switch (hw->mac.type) { + case e1000_i210: + case e1000_i211: + if (!(e1000_get_flash_presence_i210(hw))) { + snprintf(adapter->fw_version, + sizeof(adapter->fw_version), + "%2d.%2d-%d", + fw.invm_major, fw.invm_minor, fw.invm_img_type); + break; + } + /* fall through */ + default: + /* if option rom is valid, display its version too*/ + if (fw.or_valid) { + snprintf(adapter->fw_version, + sizeof(adapter->fw_version), + "%d.%d, 0x%08x, %d.%d.%d", + fw.eep_major, fw.eep_minor, fw.etrack_id, + fw.or_major, fw.or_build, fw.or_patch); + /* no option rom */ + } else { + if (fw.etrack_id != 0X0000) { + snprintf(adapter->fw_version, + sizeof(adapter->fw_version), + "%d.%d, 0x%08x", + fw.eep_major, fw.eep_minor, fw.etrack_id); + } else { + snprintf(adapter->fw_version, + sizeof(adapter->fw_version), + "%d.%d.%d", + fw.eep_major, fw.eep_minor, fw.eep_build); + } + } + break; + } + + return; +} + +/** + * igb_init_mas - init Media Autosense feature if enabled in the NVM + * + * @adapter: adapter struct + **/ +static void igb_init_mas(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u16 eeprom_data; + + e1000_read_nvm(hw, NVM_COMPAT, 1, &eeprom_data); + switch (hw->bus.func) { + case E1000_FUNC_0: + if (eeprom_data & IGB_MAS_ENABLE_0) + adapter->flags |= IGB_FLAG_MAS_ENABLE; + break; + case E1000_FUNC_1: + if (eeprom_data & IGB_MAS_ENABLE_1) + adapter->flags |= IGB_FLAG_MAS_ENABLE; + break; + case E1000_FUNC_2: + if (eeprom_data & IGB_MAS_ENABLE_2) + adapter->flags |= IGB_FLAG_MAS_ENABLE; + break; + case E1000_FUNC_3: + if (eeprom_data & IGB_MAS_ENABLE_3) + adapter->flags |= IGB_FLAG_MAS_ENABLE; + break; + default: + /* Shouldn't get here */ + dev_err(pci_dev_to_dev(adapter->pdev), + "%s:AMS: Invalid port configuration, returning\n", + adapter->netdev->name); + break; + } +} + +/** + * igb_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in igb_pci_tbl + * + * Returns 0 on success, negative on failure + * + * igb_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ +static int __devinit igb_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct igb_adapter *adapter; + struct e1000_hw *hw; + u16 eeprom_data = 0; + u8 pba_str[E1000_PBANUM_LENGTH]; + s32 ret_val; + static int global_quad_port_a; /* global quad port a indication */ + int i, err, pci_using_dac; + static int cards_found; + + err = pci_enable_device_mem(pdev); + if (err) + return err; + + pci_using_dac = 0; + err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); + if (!err) { + err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); + if (!err) + pci_using_dac = 1; + } else { + err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); + if (err) { + err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); + if (err) { + IGB_ERR("No usable DMA configuration, " + "aborting\n"); + goto err_dma; + } + } + } + +#ifndef HAVE_ASPM_QUIRKS + /* 82575 requires that the pci-e link partner disable the L0s state */ + switch (pdev->device) { + case E1000_DEV_ID_82575EB_COPPER: + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82575GB_QUAD_COPPER: + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); + default: + break; + } + +#endif /* HAVE_ASPM_QUIRKS */ + err = pci_request_selected_regions(pdev, + pci_select_bars(pdev, + IORESOURCE_MEM), + igb_driver_name); + if (err) + goto err_pci_reg; + + pci_enable_pcie_error_reporting(pdev); + + pci_set_master(pdev); + + err = -ENOMEM; +#ifdef HAVE_TX_MQ + netdev = alloc_etherdev_mq(sizeof(struct igb_adapter), + IGB_MAX_TX_QUEUES); +#else + netdev = alloc_etherdev(sizeof(struct igb_adapter)); +#endif /* HAVE_TX_MQ */ + if (!netdev) + goto err_alloc_etherdev; + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &pdev->dev); + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + hw = &adapter->hw; + hw->back = adapter; + adapter->port_num = hw->bus.func; + adapter->msg_enable = (1 << debug) - 1; + +#ifdef HAVE_PCI_ERS + err = pci_save_state(pdev); + if (err) + goto err_ioremap; +#endif + err = -EIO; + hw->hw_addr = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!hw->hw_addr) + goto err_ioremap; + +#ifdef HAVE_NET_DEVICE_OPS + netdev->netdev_ops = &igb_netdev_ops; +#else /* HAVE_NET_DEVICE_OPS */ + netdev->open = &igb_open; + netdev->stop = &igb_close; + netdev->get_stats = &igb_get_stats; +#ifdef HAVE_SET_RX_MODE + netdev->set_rx_mode = &igb_set_rx_mode; +#endif + netdev->set_multicast_list = &igb_set_rx_mode; + netdev->set_mac_address = &igb_set_mac; + netdev->change_mtu = &igb_change_mtu; + netdev->do_ioctl = &igb_ioctl; +#ifdef HAVE_TX_TIMEOUT + netdev->tx_timeout = &igb_tx_timeout; +#endif + netdev->vlan_rx_register = igb_vlan_mode; + netdev->vlan_rx_add_vid = igb_vlan_rx_add_vid; + netdev->vlan_rx_kill_vid = igb_vlan_rx_kill_vid; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = igb_netpoll; +#endif + netdev->hard_start_xmit = &igb_xmit_frame; +#endif /* HAVE_NET_DEVICE_OPS */ + igb_set_ethtool_ops(netdev); +#ifdef HAVE_TX_TIMEOUT + netdev->watchdog_timeo = 5 * HZ; +#endif + + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + + adapter->bd_number = cards_found; + + /* setup the private structure */ + err = igb_sw_init(adapter); + if (err) + goto err_sw_init; + + e1000_get_bus_info(hw); + + hw->phy.autoneg_wait_to_complete = FALSE; + hw->mac.adaptive_ifs = FALSE; + + /* Copper options */ + if (hw->phy.media_type == e1000_media_type_copper) { + hw->phy.mdix = AUTO_ALL_MODES; + hw->phy.disable_polarity_correction = FALSE; + hw->phy.ms_type = e1000_ms_hw_default; + } + + if (e1000_check_reset_block(hw)) + dev_info(pci_dev_to_dev(pdev), + "PHY reset is blocked due to SOL/IDER session.\n"); + + /* + * features is initialized to 0 in allocation, it might have bits + * set by igb_sw_init so we should use an or instead of an + * assignment. + */ + netdev->features |= NETIF_F_SG | + NETIF_F_IP_CSUM | +#ifdef NETIF_F_IPV6_CSUM + NETIF_F_IPV6_CSUM | +#endif +#ifdef NETIF_F_TSO + NETIF_F_TSO | +#ifdef NETIF_F_TSO6 + NETIF_F_TSO6 | +#endif +#endif /* NETIF_F_TSO */ +#ifdef NETIF_F_RXHASH + NETIF_F_RXHASH | +#endif + NETIF_F_RXCSUM | +#ifdef NETIF_F_HW_VLAN_CTAG_RX + NETIF_F_HW_VLAN_CTAG_RX | + NETIF_F_HW_VLAN_CTAG_TX; +#else + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_TX; +#endif + + if (hw->mac.type >= e1000_82576) + netdev->features |= NETIF_F_SCTP_CSUM; + +#ifdef HAVE_NDO_SET_FEATURES + /* copy netdev features into list of user selectable features */ + netdev->hw_features |= netdev->features; +#ifndef IGB_NO_LRO + + /* give us the option of enabling LRO later */ + netdev->hw_features |= NETIF_F_LRO; +#endif +#else +#ifdef NETIF_F_GRO + + /* this is only needed on kernels prior to 2.6.39 */ + netdev->features |= NETIF_F_GRO; +#endif +#endif + + /* set this bit last since it cannot be part of hw_features */ +#ifdef NETIF_F_HW_VLAN_CTAG_FILTER + netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; +#else + netdev->features |= NETIF_F_HW_VLAN_FILTER; +#endif + +#ifdef HAVE_NETDEV_VLAN_FEATURES + netdev->vlan_features |= NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | + NETIF_F_SG; + +#endif + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + + adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw); +#ifdef DEBUG + if (adapter->dmac != IGB_DMAC_DISABLE) + printk("%s: DMA Coalescing is enabled..\n", netdev->name); +#endif + + /* before reading the NVM, reset the controller to put the device in a + * known good starting state */ + e1000_reset_hw(hw); + + /* make sure the NVM is good */ + if (e1000_validate_nvm_checksum(hw) < 0) { + dev_err(pci_dev_to_dev(pdev), "The NVM Checksum Is Not" + " Valid\n"); + err = -EIO; + goto err_eeprom; + } + + /* copy the MAC address out of the NVM */ + if (e1000_read_mac_addr(hw)) + dev_err(pci_dev_to_dev(pdev), "NVM Read Error\n"); + memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); +#ifdef ETHTOOL_GPERMADDR + memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); + + if (!is_valid_ether_addr(netdev->perm_addr)) { +#else + if (!is_valid_ether_addr(netdev->dev_addr)) { +#endif + dev_err(pci_dev_to_dev(pdev), "Invalid MAC Address\n"); + err = -EIO; + goto err_eeprom; + } + + memcpy(&adapter->mac_table[0].addr, hw->mac.addr, netdev->addr_len); + adapter->mac_table[0].queue = adapter->vfs_allocated_count; + adapter->mac_table[0].state = (IGB_MAC_STATE_DEFAULT | IGB_MAC_STATE_IN_USE); + igb_rar_set(adapter, 0); + + /* get firmware version for ethtool -i */ + igb_set_fw_version(adapter); + + /* Check if Media Autosense is enabled */ + if (hw->mac.type == e1000_82580) + igb_init_mas(adapter); +#ifdef HAVE_TIMER_SETUP + timer_setup(&adapter->watchdog_timer, &igb_watchdog, 0); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + timer_setup(&adapter->dma_err_timer, &igb_dma_err_timer, 0); + timer_setup(&adapter->phy_info_timer, &igb_update_phy_info, 0); +#else + setup_timer(&adapter->watchdog_timer, &igb_watchdog, + (unsigned long) adapter); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + setup_timer(&adapter->dma_err_timer, &igb_dma_err_timer, + (unsigned long) adapter); + setup_timer(&adapter->phy_info_timer, &igb_update_phy_info, + (unsigned long) adapter); +#endif + + INIT_WORK(&adapter->reset_task, igb_reset_task); + INIT_WORK(&adapter->watchdog_task, igb_watchdog_task); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + INIT_WORK(&adapter->dma_err_task, igb_dma_err_task); + + /* Initialize link properties that are user-changeable */ + adapter->fc_autoneg = true; + hw->mac.autoneg = true; + hw->phy.autoneg_advertised = 0x2f; + + hw->fc.requested_mode = e1000_fc_default; + hw->fc.current_mode = e1000_fc_default; + + e1000_validate_mdi_setting(hw); + + /* By default, support wake on port A */ + if (hw->bus.func == 0) + adapter->flags |= IGB_FLAG_WOL_SUPPORTED; + + /* Check the NVM for wake support for non-port A ports */ + if (hw->mac.type >= e1000_82580) + hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + + NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, + &eeprom_data); + else if (hw->bus.func == 1) + e1000_read_nvm(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); + + if (eeprom_data & IGB_EEPROM_APME) + adapter->flags |= IGB_FLAG_WOL_SUPPORTED; + + /* now that we have the eeprom settings, apply the special cases where + * the eeprom may be wrong or the board simply won't support wake on + * lan on a particular port */ + switch (pdev->device) { + case E1000_DEV_ID_82575GB_QUAD_COPPER: + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + break; + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: + /* Wake events only supported on port A for dual fiber + * regardless of eeprom setting */ + if (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_FUNC_1) + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + break; + case E1000_DEV_ID_82576_QUAD_COPPER: + case E1000_DEV_ID_82576_QUAD_COPPER_ET2: + /* if quad port adapter, disable WoL on all but port A */ + if (global_quad_port_a != 0) + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + else + adapter->flags |= IGB_FLAG_QUAD_PORT_A; + /* Reset for multiple quad port adapters */ + if (++global_quad_port_a == 4) + global_quad_port_a = 0; + break; + default: + /* If the device can't wake, don't set software support */ + if (!device_can_wakeup(&adapter->pdev->dev)) + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + break; + } + + /* initialize the wol settings based on the eeprom settings */ + if (adapter->flags & IGB_FLAG_WOL_SUPPORTED) + adapter->wol |= E1000_WUFC_MAG; + + /* Some vendors want WoL disabled by default, but still supported */ + if ((hw->mac.type == e1000_i350) && + (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) { + adapter->flags |= IGB_FLAG_WOL_SUPPORTED; + adapter->wol = 0; + } + + device_set_wakeup_enable(pci_dev_to_dev(adapter->pdev), + adapter->flags & IGB_FLAG_WOL_SUPPORTED); + + /* reset the hardware with the new settings */ + igb_reset(adapter); + adapter->devrc = 0; + +#ifdef HAVE_I2C_SUPPORT + /* Init the I2C interface */ + err = igb_init_i2c(adapter); + if (err) { + dev_err(&pdev->dev, "failed to init i2c interface\n"); + goto err_eeprom; + } +#endif /* HAVE_I2C_SUPPORT */ + + /* let the f/w know that the h/w is now under the control of the + * driver. */ + igb_get_hw_control(adapter); + + strncpy(netdev->name, "eth%d", IFNAMSIZ); + err = register_netdev(netdev); + if (err) + goto err_register; + +#ifdef CONFIG_IGB_VMDQ_NETDEV + err = igb_init_vmdq_netdevs(adapter); + if (err) + goto err_register; +#endif + /* carrier off reporting is important to ethtool even BEFORE open */ + netif_carrier_off(netdev); + +#ifdef IGB_DCA + if (dca_add_requester(&pdev->dev) == E1000_SUCCESS) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; + dev_info(pci_dev_to_dev(pdev), "DCA enabled\n"); + igb_setup_dca(adapter); + } + +#endif +#ifdef HAVE_PTP_1588_CLOCK + /* do hw tstamp init after resetting */ + igb_ptp_init(adapter); +#endif /* HAVE_PTP_1588_CLOCK */ + + dev_info(pci_dev_to_dev(pdev), "Intel(R) Gigabit Ethernet Network Connection\n"); + /* print bus type/speed/width info */ + dev_info(pci_dev_to_dev(pdev), "%s: (PCIe:%s:%s) ", + netdev->name, + ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5GT/s" : + (hw->bus.speed == e1000_bus_speed_5000) ? "5.0GT/s" : + (hw->mac.type == e1000_i354) ? "integrated" : + "unknown"), + ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : + (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" : + (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" : + (hw->mac.type == e1000_i354) ? "integrated" : + "unknown")); + dev_info(pci_dev_to_dev(pdev), "%s: MAC: ", netdev->name); + for (i = 0; i < 6; i++) + printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':'); + + ret_val = e1000_read_pba_string(hw, pba_str, E1000_PBANUM_LENGTH); + if (ret_val) + strncpy(pba_str, "Unknown", sizeof(pba_str) - 1); + dev_info(pci_dev_to_dev(pdev), "%s: PBA No: %s\n", netdev->name, + pba_str); + + + /* Initialize the thermal sensor on i350 devices. */ + if (hw->mac.type == e1000_i350) { + if (hw->bus.func == 0) { + u16 ets_word; + + /* + * Read the NVM to determine if this i350 device + * supports an external thermal sensor. + */ + e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_word); + if (ets_word != 0x0000 && ets_word != 0xFFFF) + adapter->ets = true; + else + adapter->ets = false; + } +#ifdef IGB_HWMON + + igb_sysfs_init(adapter); +#else +#ifdef IGB_PROCFS + + igb_procfs_init(adapter); +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ + } else { + adapter->ets = false; + } + + if (hw->phy.media_type == e1000_media_type_copper) { + switch (hw->mac.type) { + case e1000_i350: + case e1000_i210: + case e1000_i211: + /* Enable EEE for internal copper PHY devices */ + err = e1000_set_eee_i350(hw); + if (!err && + (adapter->flags & IGB_FLAG_EEE)) + adapter->eee_advert = + MDIO_EEE_100TX | MDIO_EEE_1000T; + break; + case e1000_i354: + if ((E1000_READ_REG(hw, E1000_CTRL_EXT)) & + (E1000_CTRL_EXT_LINK_MODE_SGMII)) { + err = e1000_set_eee_i354(hw); + if ((!err) && + (adapter->flags & IGB_FLAG_EEE)) + adapter->eee_advert = + MDIO_EEE_100TX | MDIO_EEE_1000T; + } + break; + default: + break; + } + } + + /* send driver version info to firmware */ + if (hw->mac.type >= e1000_i350) + igb_init_fw(adapter); + +#ifndef IGB_NO_LRO + if (netdev->features & NETIF_F_LRO) + dev_info(pci_dev_to_dev(pdev), "Internal LRO is enabled \n"); + else + dev_info(pci_dev_to_dev(pdev), "LRO is disabled \n"); +#endif + dev_info(pci_dev_to_dev(pdev), + "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n", + adapter->msix_entries ? "MSI-X" : + (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy", + adapter->num_rx_queues, adapter->num_tx_queues); + + cards_found++; + + pm_runtime_put_noidle(&pdev->dev); + return 0; + +err_register: + igb_release_hw_control(adapter); +#ifdef HAVE_I2C_SUPPORT + memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap)); +#endif /* HAVE_I2C_SUPPORT */ +err_eeprom: + if (!e1000_check_reset_block(hw)) + e1000_phy_hw_reset(hw); + + if (hw->flash_address) + iounmap(hw->flash_address); +err_sw_init: + igb_clear_interrupt_scheme(adapter); + igb_reset_sriov_capability(adapter); + iounmap(hw->hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); +err_pci_reg: +err_dma: + pci_disable_device(pdev); + return err; +} +#ifdef HAVE_I2C_SUPPORT +/* + * igb_remove_i2c - Cleanup I2C interface + * @adapter: pointer to adapter structure + * + */ +static void igb_remove_i2c(struct igb_adapter *adapter) +{ + + /* free the adapter bus structure */ + i2c_del_adapter(&adapter->i2c_adap); +} +#endif /* HAVE_I2C_SUPPORT */ + +/** + * igb_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * igb_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +static void __devexit igb_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + pm_runtime_get_noresume(&pdev->dev); +#ifdef HAVE_I2C_SUPPORT + igb_remove_i2c(adapter); +#endif /* HAVE_I2C_SUPPORT */ +#ifdef HAVE_PTP_1588_CLOCK + igb_ptp_stop(adapter); +#endif /* HAVE_PTP_1588_CLOCK */ + + /* flush_scheduled work may reschedule our watchdog task, so + * explicitly disable watchdog tasks from being rescheduled */ + set_bit(__IGB_DOWN, &adapter->state); + del_timer_sync(&adapter->watchdog_timer); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + del_timer_sync(&adapter->dma_err_timer); + del_timer_sync(&adapter->phy_info_timer); + + flush_scheduled_work(); + +#ifdef IGB_DCA + if (adapter->flags & IGB_FLAG_DCA_ENABLED) { + dev_info(pci_dev_to_dev(pdev), "DCA disabled\n"); + dca_remove_requester(&pdev->dev); + adapter->flags &= ~IGB_FLAG_DCA_ENABLED; + E1000_WRITE_REG(hw, E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_DISABLE); + } +#endif + + /* Release control of h/w to f/w. If f/w is AMT enabled, this + * would have already happened in close and is redundant. */ + igb_release_hw_control(adapter); + + unregister_netdev(netdev); +#ifdef CONFIG_IGB_VMDQ_NETDEV + igb_remove_vmdq_netdevs(adapter); +#endif + + igb_clear_interrupt_scheme(adapter); + igb_reset_sriov_capability(adapter); + + iounmap(hw->hw_addr); + if (hw->flash_address) + iounmap(hw->flash_address); + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); + +#ifdef IGB_HWMON + igb_sysfs_exit(adapter); +#else +#ifdef IGB_PROCFS + igb_procfs_exit(adapter); +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ + kfree(adapter->mac_table); + kfree(adapter->shadow_vfta); + free_netdev(netdev); + + pci_disable_pcie_error_reporting(pdev); + + pci_disable_device(pdev); +} + +/** + * igb_sw_init - Initialize general software structures (struct igb_adapter) + * @adapter: board private structure to initialize + * + * igb_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + **/ +static int igb_sw_init(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + + /* PCI config space info */ + + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_device_id = pdev->subsystem_device; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id); + + pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word); + + /* set default ring sizes */ + adapter->tx_ring_count = IGB_DEFAULT_TXD; + adapter->rx_ring_count = IGB_DEFAULT_RXD; + + /* set default work limits */ + adapter->tx_work_limit = IGB_DEFAULT_TX_WORK; + + adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + + VLAN_HLEN; + + /* Initialize the hardware-specific values */ + if (e1000_setup_init_funcs(hw, TRUE)) { + dev_err(pci_dev_to_dev(pdev), "Hardware Initialization Failure\n"); + return -EIO; + } + + adapter->mac_table = kzalloc(sizeof(struct igb_mac_addr) * + hw->mac.rar_entry_count, + GFP_ATOMIC); + + /* Setup and initialize a copy of the hw vlan table array */ + adapter->shadow_vfta = kzalloc(sizeof(u32) * E1000_VFTA_ENTRIES, + GFP_ATOMIC); +#ifdef NO_KNI + /* These calls may decrease the number of queues */ + if (hw->mac.type < e1000_i210) { + igb_set_sriov_capability(adapter); + } + + if (igb_init_interrupt_scheme(adapter, true)) { + dev_err(pci_dev_to_dev(pdev), "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + + /* Explicitly disable IRQ since the NIC can be in any state. */ + igb_irq_disable(adapter); + + set_bit(__IGB_DOWN, &adapter->state); +#endif + return 0; +} + +/** + * igb_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + **/ +static int __igb_open(struct net_device *netdev, bool resuming) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; +#ifdef CONFIG_PM_RUNTIME + struct pci_dev *pdev = adapter->pdev; +#endif /* CONFIG_PM_RUNTIME */ + int err; + int i; + + /* disallow open during test */ + if (test_bit(__IGB_TESTING, &adapter->state)) { + WARN_ON(resuming); + return -EBUSY; + } + +#ifdef CONFIG_PM_RUNTIME + if (!resuming) + pm_runtime_get_sync(&pdev->dev); +#endif /* CONFIG_PM_RUNTIME */ + + netif_carrier_off(netdev); + + /* allocate transmit descriptors */ + err = igb_setup_all_tx_resources(adapter); + if (err) + goto err_setup_tx; + + /* allocate receive descriptors */ + err = igb_setup_all_rx_resources(adapter); + if (err) + goto err_setup_rx; + + igb_power_up_link(adapter); + + /* before we allocate an interrupt, we must be ready to handle it. + * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt + * as soon as we call pci_request_irq, so we have to setup our + * clean_rx handler before we do so. */ + igb_configure(adapter); + + err = igb_request_irq(adapter); + if (err) + goto err_req_irq; + + /* Notify the stack of the actual queue counts. */ + netif_set_real_num_tx_queues(netdev, + adapter->vmdq_pools ? 1 : + adapter->num_tx_queues); + + err = netif_set_real_num_rx_queues(netdev, + adapter->vmdq_pools ? 1 : + adapter->num_rx_queues); + if (err) + goto err_set_queues; + + /* From here on the code is the same as igb_up() */ + clear_bit(__IGB_DOWN, &adapter->state); + + for (i = 0; i < adapter->num_q_vectors; i++) + napi_enable(&(adapter->q_vector[i]->napi)); + igb_configure_lli(adapter); + + /* Clear any pending interrupts. */ + E1000_READ_REG(hw, E1000_ICR); + + igb_irq_enable(adapter); + + /* notify VFs that reset has been completed */ + if (adapter->vfs_allocated_count) { + u32 reg_data = E1000_READ_REG(hw, E1000_CTRL_EXT); + reg_data |= E1000_CTRL_EXT_PFRSTD; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg_data); + } + + netif_tx_start_all_queues(netdev); + + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + schedule_work(&adapter->dma_err_task); + + /* start the watchdog. */ + hw->mac.get_link_status = 1; + schedule_work(&adapter->watchdog_task); + + return E1000_SUCCESS; + +err_set_queues: + igb_free_irq(adapter); +err_req_irq: + igb_release_hw_control(adapter); + igb_power_down_link(adapter); + igb_free_all_rx_resources(adapter); +err_setup_rx: + igb_free_all_tx_resources(adapter); +err_setup_tx: + igb_reset(adapter); + +#ifdef CONFIG_PM_RUNTIME + if (!resuming) + pm_runtime_put(&pdev->dev); +#endif /* CONFIG_PM_RUNTIME */ + + return err; +} + +static int igb_open(struct net_device *netdev) +{ + return __igb_open(netdev, false); +} + +/** + * igb_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the driver's control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +static int __igb_close(struct net_device *netdev, bool suspending) +{ + struct igb_adapter *adapter = netdev_priv(netdev); +#ifdef CONFIG_PM_RUNTIME + struct pci_dev *pdev = adapter->pdev; +#endif /* CONFIG_PM_RUNTIME */ + + WARN_ON(test_bit(__IGB_RESETTING, &adapter->state)); + +#ifdef CONFIG_PM_RUNTIME + if (!suspending) + pm_runtime_get_sync(&pdev->dev); +#endif /* CONFIG_PM_RUNTIME */ + + igb_down(adapter); + + igb_release_hw_control(adapter); + + igb_free_irq(adapter); + + igb_free_all_tx_resources(adapter); + igb_free_all_rx_resources(adapter); + +#ifdef CONFIG_PM_RUNTIME + if (!suspending) + pm_runtime_put_sync(&pdev->dev); +#endif /* CONFIG_PM_RUNTIME */ + + return 0; +} + +static int igb_close(struct net_device *netdev) +{ + return __igb_close(netdev, false); +} + +/** + * igb_setup_tx_resources - allocate Tx resources (Descriptors) + * @tx_ring: tx descriptor ring (for a specific queue) to setup + * + * Return 0 on success, negative on failure + **/ +int igb_setup_tx_resources(struct igb_ring *tx_ring) +{ + struct device *dev = tx_ring->dev; + int size; + + size = sizeof(struct igb_tx_buffer) * tx_ring->count; + tx_ring->tx_buffer_info = vzalloc(size); + if (!tx_ring->tx_buffer_info) + goto err; + + /* round up to nearest 4K */ + tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc); + tx_ring->size = ALIGN(tx_ring->size, 4096); + + tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, + &tx_ring->dma, GFP_KERNEL); + + if (!tx_ring->desc) + goto err; + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + + return 0; + +err: + vfree(tx_ring->tx_buffer_info); + dev_err(dev, + "Unable to allocate memory for the transmit descriptor ring\n"); + return -ENOMEM; +} + +/** + * igb_setup_all_tx_resources - wrapper to allocate Tx resources + * (Descriptors) for all queues + * @adapter: board private structure + * + * Return 0 on success, negative on failure + **/ +static int igb_setup_all_tx_resources(struct igb_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + int i, err = 0; + + for (i = 0; i < adapter->num_tx_queues; i++) { + err = igb_setup_tx_resources(adapter->tx_ring[i]); + if (err) { + dev_err(pci_dev_to_dev(pdev), + "Allocation for Tx Queue %u failed\n", i); + for (i--; i >= 0; i--) + igb_free_tx_resources(adapter->tx_ring[i]); + break; + } + } + + return err; +} + +/** + * igb_setup_tctl - configure the transmit control registers + * @adapter: Board private structure + **/ +void igb_setup_tctl(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 tctl; + + /* disable queue 0 which is enabled by default on 82575 and 82576 */ + E1000_WRITE_REG(hw, E1000_TXDCTL(0), 0); + + /* Program the Transmit Control Register */ + tctl = E1000_READ_REG(hw, E1000_TCTL); + tctl &= ~E1000_TCTL_CT; + tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | + (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); + + e1000_config_collision_dist(hw); + + /* Enable transmits */ + tctl |= E1000_TCTL_EN; + + E1000_WRITE_REG(hw, E1000_TCTL, tctl); +} + +static u32 igb_tx_wthresh(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + switch (hw->mac.type) { + case e1000_i354: + return 4; + case e1000_82576: + if (adapter->msix_entries) + return 1; + default: + break; + } + + return 16; +} + +/** + * igb_configure_tx_ring - Configure transmit ring after Reset + * @adapter: board private structure + * @ring: tx ring to configure + * + * Configure a transmit ring after a reset. + **/ +void igb_configure_tx_ring(struct igb_adapter *adapter, + struct igb_ring *ring) +{ + struct e1000_hw *hw = &adapter->hw; + u32 txdctl = 0; + u64 tdba = ring->dma; + int reg_idx = ring->reg_idx; + + /* disable the queue */ + E1000_WRITE_REG(hw, E1000_TXDCTL(reg_idx), 0); + E1000_WRITE_FLUSH(hw); + mdelay(10); + + E1000_WRITE_REG(hw, E1000_TDLEN(reg_idx), + ring->count * sizeof(union e1000_adv_tx_desc)); + E1000_WRITE_REG(hw, E1000_TDBAL(reg_idx), + tdba & 0x00000000ffffffffULL); + E1000_WRITE_REG(hw, E1000_TDBAH(reg_idx), tdba >> 32); + + ring->tail = hw->hw_addr + E1000_TDT(reg_idx); + E1000_WRITE_REG(hw, E1000_TDH(reg_idx), 0); + writel(0, ring->tail); + + txdctl |= IGB_TX_PTHRESH; + txdctl |= IGB_TX_HTHRESH << 8; + txdctl |= igb_tx_wthresh(adapter) << 16; + + txdctl |= E1000_TXDCTL_QUEUE_ENABLE; + E1000_WRITE_REG(hw, E1000_TXDCTL(reg_idx), txdctl); +} + +/** + * igb_configure_tx - Configure transmit Unit after Reset + * @adapter: board private structure + * + * Configure the Tx unit of the MAC after a reset. + **/ +static void igb_configure_tx(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + igb_configure_tx_ring(adapter, adapter->tx_ring[i]); +} + +/** + * igb_setup_rx_resources - allocate Rx resources (Descriptors) + * @rx_ring: rx descriptor ring (for a specific queue) to setup + * + * Returns 0 on success, negative on failure + **/ +int igb_setup_rx_resources(struct igb_ring *rx_ring) +{ + struct device *dev = rx_ring->dev; + int size, desc_len; + + size = sizeof(struct igb_rx_buffer) * rx_ring->count; + rx_ring->rx_buffer_info = vzalloc(size); + if (!rx_ring->rx_buffer_info) + goto err; + + desc_len = sizeof(union e1000_adv_rx_desc); + + /* Round up to nearest 4K */ + rx_ring->size = rx_ring->count * desc_len; + rx_ring->size = ALIGN(rx_ring->size, 4096); + + rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, + &rx_ring->dma, GFP_KERNEL); + + if (!rx_ring->desc) + goto err; + + rx_ring->next_to_alloc = 0; + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + + return 0; + +err: + vfree(rx_ring->rx_buffer_info); + rx_ring->rx_buffer_info = NULL; + dev_err(dev, "Unable to allocate memory for the receive descriptor" + " ring\n"); + return -ENOMEM; +} + +/** + * igb_setup_all_rx_resources - wrapper to allocate Rx resources + * (Descriptors) for all queues + * @adapter: board private structure + * + * Return 0 on success, negative on failure + **/ +static int igb_setup_all_rx_resources(struct igb_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + int i, err = 0; + + for (i = 0; i < adapter->num_rx_queues; i++) { + err = igb_setup_rx_resources(adapter->rx_ring[i]); + if (err) { + dev_err(pci_dev_to_dev(pdev), + "Allocation for Rx Queue %u failed\n", i); + for (i--; i >= 0; i--) + igb_free_rx_resources(adapter->rx_ring[i]); + break; + } + } + + return err; +} + +/** + * igb_setup_mrqc - configure the multiple receive queue control registers + * @adapter: Board private structure + **/ +static void igb_setup_mrqc(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 mrqc, rxcsum; + u32 j, num_rx_queues, shift = 0, shift2 = 0; + static const u32 rsskey[10] = { 0xDA565A6D, 0xC20E5B25, 0x3D256741, + 0xB08FA343, 0xCB2BCAD0, 0xB4307BAE, + 0xA32DCB77, 0x0CF23080, 0x3BB7426A, + 0xFA01ACBE }; + + /* Fill out hash function seeds */ + for (j = 0; j < 10; j++) + E1000_WRITE_REG(hw, E1000_RSSRK(j), rsskey[j]); + + num_rx_queues = adapter->rss_queues; + + /* 82575 and 82576 supports 2 RSS queues for VMDq */ + switch (hw->mac.type) { + case e1000_82575: + if (adapter->vmdq_pools) { + shift = 2; + shift2 = 6; + break; + } + shift = 6; + break; + case e1000_82576: + /* 82576 supports 2 RSS queues for SR-IOV */ + if (adapter->vfs_allocated_count || adapter->vmdq_pools) { + shift = 3; + num_rx_queues = 2; + } + break; + default: + break; + } + + /* + * Populate the redirection table 4 entries at a time. To do this + * we are generating the results for n and n+2 and then interleaving + * those with the results with n+1 and n+3. + */ + for (j = 0; j < 32; j++) { + /* first pass generates n and n+2 */ + u32 base = ((j * 0x00040004) + 0x00020000) * num_rx_queues; + u32 reta = (base & 0x07800780) >> (7 - shift); + + /* second pass generates n+1 and n+3 */ + base += 0x00010001 * num_rx_queues; + reta |= (base & 0x07800780) << (1 + shift); + + /* generate 2nd table for 82575 based parts */ + if (shift2) + reta |= (0x01010101 * num_rx_queues) << shift2; + + E1000_WRITE_REG(hw, E1000_RETA(j), reta); + } + + /* + * Disable raw packet checksumming so that RSS hash is placed in + * descriptor on writeback. No need to enable TCP/UDP/IP checksum + * offloads as they are enabled by default + */ + rxcsum = E1000_READ_REG(hw, E1000_RXCSUM); + rxcsum |= E1000_RXCSUM_PCSD; + + if (adapter->hw.mac.type >= e1000_82576) + /* Enable Receive Checksum Offload for SCTP */ + rxcsum |= E1000_RXCSUM_CRCOFL; + + /* Don't need to set TUOFL or IPOFL, they default to 1 */ + E1000_WRITE_REG(hw, E1000_RXCSUM, rxcsum); + + /* Generate RSS hash based on packet types, TCP/UDP + * port numbers and/or IPv4/v6 src and dst addresses + */ + mrqc = E1000_MRQC_RSS_FIELD_IPV4 | + E1000_MRQC_RSS_FIELD_IPV4_TCP | + E1000_MRQC_RSS_FIELD_IPV6 | + E1000_MRQC_RSS_FIELD_IPV6_TCP | + E1000_MRQC_RSS_FIELD_IPV6_TCP_EX; + + if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP) + mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP; + if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP) + mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP; + + /* If VMDq is enabled then we set the appropriate mode for that, else + * we default to RSS so that an RSS hash is calculated per packet even + * if we are only using one queue */ + if (adapter->vfs_allocated_count || adapter->vmdq_pools) { + if (hw->mac.type > e1000_82575) { + /* Set the default pool for the PF's first queue */ + u32 vtctl = E1000_READ_REG(hw, E1000_VT_CTL); + vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK | + E1000_VT_CTL_DISABLE_DEF_POOL); + vtctl |= adapter->vfs_allocated_count << + E1000_VT_CTL_DEFAULT_POOL_SHIFT; + E1000_WRITE_REG(hw, E1000_VT_CTL, vtctl); + } else if (adapter->rss_queues > 1) { + /* set default queue for pool 1 to queue 2 */ + E1000_WRITE_REG(hw, E1000_VT_CTL, + adapter->rss_queues << 7); + } + if (adapter->rss_queues > 1) + mrqc |= E1000_MRQC_ENABLE_VMDQ_RSS_2Q; + else + mrqc |= E1000_MRQC_ENABLE_VMDQ; + } else { + mrqc |= E1000_MRQC_ENABLE_RSS_4Q; + } + igb_vmm_control(adapter); + + E1000_WRITE_REG(hw, E1000_MRQC, mrqc); +} + +/** + * igb_setup_rctl - configure the receive control registers + * @adapter: Board private structure + **/ +void igb_setup_rctl(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl; + + rctl = E1000_READ_REG(hw, E1000_RCTL); + + rctl &= ~(3 << E1000_RCTL_MO_SHIFT); + rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); + + rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF | + (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT); + + /* + * enable stripping of CRC. It's unlikely this will break BMC + * redirection as it did with e1000. Newer features require + * that the HW strips the CRC. + */ + rctl |= E1000_RCTL_SECRC; + + /* disable store bad packets and clear size bits. */ + rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256); + + /* enable LPE to prevent packets larger than max_frame_size */ + rctl |= E1000_RCTL_LPE; + + /* disable queue 0 to prevent tail write w/o re-config */ + E1000_WRITE_REG(hw, E1000_RXDCTL(0), 0); + + /* Attention!!! For SR-IOV PF driver operations you must enable + * queue drop for all VF and PF queues to prevent head of line blocking + * if an un-trusted VF does not provide descriptors to hardware. + */ + if (adapter->vfs_allocated_count) { + /* set all queue drop enable bits */ + E1000_WRITE_REG(hw, E1000_QDE, ALL_QUEUES); + } + + E1000_WRITE_REG(hw, E1000_RCTL, rctl); +} + +static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size, + int vfn) +{ + struct e1000_hw *hw = &adapter->hw; + u32 vmolr; + + /* if it isn't the PF check to see if VFs are enabled and + * increase the size to support vlan tags */ + if (vfn < adapter->vfs_allocated_count && + adapter->vf_data[vfn].vlans_enabled) + size += VLAN_HLEN; + +#ifdef CONFIG_IGB_VMDQ_NETDEV + if (vfn >= adapter->vfs_allocated_count) { + int queue = vfn - adapter->vfs_allocated_count; + struct igb_vmdq_adapter *vadapter; + + vadapter = netdev_priv(adapter->vmdq_netdev[queue-1]); + if (vadapter->vlgrp) + size += VLAN_HLEN; + } +#endif + vmolr = E1000_READ_REG(hw, E1000_VMOLR(vfn)); + vmolr &= ~E1000_VMOLR_RLPML_MASK; + vmolr |= size | E1000_VMOLR_LPE; + E1000_WRITE_REG(hw, E1000_VMOLR(vfn), vmolr); + + return 0; +} + +/** + * igb_rlpml_set - set maximum receive packet size + * @adapter: board private structure + * + * Configure maximum receivable packet size. + **/ +static void igb_rlpml_set(struct igb_adapter *adapter) +{ + u32 max_frame_size = adapter->max_frame_size; + struct e1000_hw *hw = &adapter->hw; + u16 pf_id = adapter->vfs_allocated_count; + + if (adapter->vmdq_pools && hw->mac.type != e1000_82575) { + int i; + for (i = 0; i < adapter->vmdq_pools; i++) + igb_set_vf_rlpml(adapter, max_frame_size, pf_id + i); + /* + * If we're in VMDQ or SR-IOV mode, then set global RLPML + * to our max jumbo frame size, in case we need to enable + * jumbo frames on one of the rings later. + * This will not pass over-length frames into the default + * queue because it's gated by the VMOLR.RLPML. + */ + max_frame_size = MAX_JUMBO_FRAME_SIZE; + } + /* Set VF RLPML for the PF device. */ + if (adapter->vfs_allocated_count) + igb_set_vf_rlpml(adapter, max_frame_size, pf_id); + + E1000_WRITE_REG(hw, E1000_RLPML, max_frame_size); +} + +static inline void igb_set_vf_vlan_strip(struct igb_adapter *adapter, + int vfn, bool enable) +{ + struct e1000_hw *hw = &adapter->hw; + u32 val; + void __iomem *reg; + + if (hw->mac.type < e1000_82576) + return; + + if (hw->mac.type == e1000_i350) + reg = hw->hw_addr + E1000_DVMOLR(vfn); + else + reg = hw->hw_addr + E1000_VMOLR(vfn); + + val = readl(reg); + if (enable) + val |= E1000_VMOLR_STRVLAN; + else + val &= ~(E1000_VMOLR_STRVLAN); + writel(val, reg); +} +static inline void igb_set_vmolr(struct igb_adapter *adapter, + int vfn, bool aupe) +{ + struct e1000_hw *hw = &adapter->hw; + u32 vmolr; + + /* + * This register exists only on 82576 and newer so if we are older then + * we should exit and do nothing + */ + if (hw->mac.type < e1000_82576) + return; + + vmolr = E1000_READ_REG(hw, E1000_VMOLR(vfn)); + + if (aupe) + vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */ + else + vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */ + + /* clear all bits that might not be set */ + vmolr &= ~E1000_VMOLR_RSSE; + + if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count) + vmolr |= E1000_VMOLR_RSSE; /* enable RSS */ + + vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */ + vmolr |= E1000_VMOLR_LPE; /* Accept long packets */ + + E1000_WRITE_REG(hw, E1000_VMOLR(vfn), vmolr); +} + +/** + * igb_configure_rx_ring - Configure a receive ring after Reset + * @adapter: board private structure + * @ring: receive ring to be configured + * + * Configure the Rx unit of the MAC after a reset. + **/ +void igb_configure_rx_ring(struct igb_adapter *adapter, + struct igb_ring *ring) +{ + struct e1000_hw *hw = &adapter->hw; + u64 rdba = ring->dma; + int reg_idx = ring->reg_idx; + u32 srrctl = 0, rxdctl = 0; + +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + /* + * RLPML prevents us from receiving a frame larger than max_frame so + * it is safe to just set the rx_buffer_len to max_frame without the + * risk of an skb over panic. + */ + ring->rx_buffer_len = max_t(u32, adapter->max_frame_size, + MAXIMUM_ETHERNET_VLAN_SIZE); + +#endif + /* disable the queue */ + E1000_WRITE_REG(hw, E1000_RXDCTL(reg_idx), 0); + + /* Set DMA base address registers */ + E1000_WRITE_REG(hw, E1000_RDBAL(reg_idx), + rdba & 0x00000000ffffffffULL); + E1000_WRITE_REG(hw, E1000_RDBAH(reg_idx), rdba >> 32); + E1000_WRITE_REG(hw, E1000_RDLEN(reg_idx), + ring->count * sizeof(union e1000_adv_rx_desc)); + + /* initialize head and tail */ + ring->tail = hw->hw_addr + E1000_RDT(reg_idx); + E1000_WRITE_REG(hw, E1000_RDH(reg_idx), 0); + writel(0, ring->tail); + + /* reset next-to- use/clean to place SW in sync with hardwdare */ + ring->next_to_clean = 0; + ring->next_to_use = 0; +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + ring->next_to_alloc = 0; + +#endif + /* set descriptor configuration */ +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + srrctl = IGB_RX_HDR_LEN << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; + srrctl |= IGB_RX_BUFSZ >> E1000_SRRCTL_BSIZEPKT_SHIFT; +#else /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ + srrctl = ALIGN(ring->rx_buffer_len, 1024) >> + E1000_SRRCTL_BSIZEPKT_SHIFT; +#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ + srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF; +#ifdef HAVE_PTP_1588_CLOCK + if (hw->mac.type >= e1000_82580) + srrctl |= E1000_SRRCTL_TIMESTAMP; +#endif /* HAVE_PTP_1588_CLOCK */ + /* + * We should set the drop enable bit if: + * SR-IOV is enabled + * or + * Flow Control is disabled and number of RX queues > 1 + * + * This allows us to avoid head of line blocking for security + * and performance reasons. + */ + if (adapter->vfs_allocated_count || + (adapter->num_rx_queues > 1 && + (hw->fc.requested_mode == e1000_fc_none || + hw->fc.requested_mode == e1000_fc_rx_pause))) + srrctl |= E1000_SRRCTL_DROP_EN; + + E1000_WRITE_REG(hw, E1000_SRRCTL(reg_idx), srrctl); + + /* set filtering for VMDQ pools */ + igb_set_vmolr(adapter, reg_idx & 0x7, true); + + rxdctl |= IGB_RX_PTHRESH; + rxdctl |= IGB_RX_HTHRESH << 8; + rxdctl |= IGB_RX_WTHRESH << 16; + + /* enable receive descriptor fetching */ + rxdctl |= E1000_RXDCTL_QUEUE_ENABLE; + E1000_WRITE_REG(hw, E1000_RXDCTL(reg_idx), rxdctl); +} + +/** + * igb_configure_rx - Configure receive Unit after Reset + * @adapter: board private structure + * + * Configure the Rx unit of the MAC after a reset. + **/ +static void igb_configure_rx(struct igb_adapter *adapter) +{ + int i; + + /* set UTA to appropriate mode */ + igb_set_uta(adapter); + + igb_full_sync_mac_table(adapter); + /* Setup the HW Rx Head and Tail Descriptor Pointers and + * the Base and Length of the Rx Descriptor Ring */ + for (i = 0; i < adapter->num_rx_queues; i++) + igb_configure_rx_ring(adapter, adapter->rx_ring[i]); +} + +/** + * igb_free_tx_resources - Free Tx Resources per Queue + * @tx_ring: Tx descriptor ring for a specific queue + * + * Free all transmit software resources + **/ +void igb_free_tx_resources(struct igb_ring *tx_ring) +{ + igb_clean_tx_ring(tx_ring); + + vfree(tx_ring->tx_buffer_info); + tx_ring->tx_buffer_info = NULL; + + /* if not set, then don't free */ + if (!tx_ring->desc) + return; + + dma_free_coherent(tx_ring->dev, tx_ring->size, + tx_ring->desc, tx_ring->dma); + + tx_ring->desc = NULL; +} + +/** + * igb_free_all_tx_resources - Free Tx Resources for All Queues + * @adapter: board private structure + * + * Free all transmit software resources + **/ +static void igb_free_all_tx_resources(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + igb_free_tx_resources(adapter->tx_ring[i]); +} + +void igb_unmap_and_free_tx_resource(struct igb_ring *ring, + struct igb_tx_buffer *tx_buffer) +{ + if (tx_buffer->skb) { + dev_kfree_skb_any(tx_buffer->skb); + if (dma_unmap_len(tx_buffer, len)) + dma_unmap_single(ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + } else if (dma_unmap_len(tx_buffer, len)) { + dma_unmap_page(ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + } + tx_buffer->next_to_watch = NULL; + tx_buffer->skb = NULL; + dma_unmap_len_set(tx_buffer, len, 0); + /* buffer_info must be completely set up in the transmit path */ +} + +/** + * igb_clean_tx_ring - Free Tx Buffers + * @tx_ring: ring to be cleaned + **/ +static void igb_clean_tx_ring(struct igb_ring *tx_ring) +{ + struct igb_tx_buffer *buffer_info; + unsigned long size; + u16 i; + + if (!tx_ring->tx_buffer_info) + return; + /* Free all the Tx ring sk_buffs */ + + for (i = 0; i < tx_ring->count; i++) { + buffer_info = &tx_ring->tx_buffer_info[i]; + igb_unmap_and_free_tx_resource(tx_ring, buffer_info); + } + + netdev_tx_reset_queue(txring_txq(tx_ring)); + + size = sizeof(struct igb_tx_buffer) * tx_ring->count; + memset(tx_ring->tx_buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(tx_ring->desc, 0, tx_ring->size); + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; +} + +/** + * igb_clean_all_tx_rings - Free Tx Buffers for all queues + * @adapter: board private structure + **/ +static void igb_clean_all_tx_rings(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + igb_clean_tx_ring(adapter->tx_ring[i]); +} + +/** + * igb_free_rx_resources - Free Rx Resources + * @rx_ring: ring to clean the resources from + * + * Free all receive software resources + **/ +void igb_free_rx_resources(struct igb_ring *rx_ring) +{ + igb_clean_rx_ring(rx_ring); + + vfree(rx_ring->rx_buffer_info); + rx_ring->rx_buffer_info = NULL; + + /* if not set, then don't free */ + if (!rx_ring->desc) + return; + + dma_free_coherent(rx_ring->dev, rx_ring->size, + rx_ring->desc, rx_ring->dma); + + rx_ring->desc = NULL; +} + +/** + * igb_free_all_rx_resources - Free Rx Resources for All Queues + * @adapter: board private structure + * + * Free all receive software resources + **/ +static void igb_free_all_rx_resources(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) + igb_free_rx_resources(adapter->rx_ring[i]); +} + +/** + * igb_clean_rx_ring - Free Rx Buffers per Queue + * @rx_ring: ring to free buffers from + **/ +void igb_clean_rx_ring(struct igb_ring *rx_ring) +{ + unsigned long size; + u16 i; + + if (!rx_ring->rx_buffer_info) + return; + +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + if (rx_ring->skb) + dev_kfree_skb(rx_ring->skb); + rx_ring->skb = NULL; + +#endif + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rx_ring->count; i++) { + struct igb_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i]; +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + if (buffer_info->dma) { + dma_unmap_single(rx_ring->dev, + buffer_info->dma, + rx_ring->rx_buffer_len, + DMA_FROM_DEVICE); + buffer_info->dma = 0; + } + + if (buffer_info->skb) { + dev_kfree_skb(buffer_info->skb); + buffer_info->skb = NULL; + } +#else + if (!buffer_info->page) + continue; + + dma_unmap_page(rx_ring->dev, + buffer_info->dma, + PAGE_SIZE, + DMA_FROM_DEVICE); + __free_page(buffer_info->page); + + buffer_info->page = NULL; +#endif + } + + size = sizeof(struct igb_rx_buffer) * rx_ring->count; + memset(rx_ring->rx_buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(rx_ring->desc, 0, rx_ring->size); + + rx_ring->next_to_alloc = 0; + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; +} + +/** + * igb_clean_all_rx_rings - Free Rx Buffers for all queues + * @adapter: board private structure + **/ +static void igb_clean_all_rx_rings(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) + igb_clean_rx_ring(adapter->rx_ring[i]); +} + +/** + * igb_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ +static int igb_set_mac(struct net_device *netdev, void *p) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + igb_del_mac_filter(adapter, hw->mac.addr, + adapter->vfs_allocated_count); + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); + + /* set the correct pool for the new PF MAC address in entry 0 */ + return igb_add_mac_filter(adapter, hw->mac.addr, + adapter->vfs_allocated_count); +} + +/** + * igb_write_mc_addr_list - write multicast addresses to MTA + * @netdev: network interface device structure + * + * Writes multicast address list to the MTA hash table. + * Returns: -ENOMEM on failure + * 0 on no addresses written + * X on writing X addresses to MTA + **/ +int igb_write_mc_addr_list(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; +#ifdef NETDEV_HW_ADDR_T_MULTICAST + struct netdev_hw_addr *ha; +#else + struct dev_mc_list *ha; +#endif + u8 *mta_list; + int i, count; +#ifdef CONFIG_IGB_VMDQ_NETDEV + int vm; +#endif + count = netdev_mc_count(netdev); +#ifdef CONFIG_IGB_VMDQ_NETDEV + for (vm = 1; vm < adapter->vmdq_pools; vm++) { + if (!adapter->vmdq_netdev[vm]) + break; + if (!netif_running(adapter->vmdq_netdev[vm])) + continue; + count += netdev_mc_count(adapter->vmdq_netdev[vm]); + } +#endif + + if (!count) { + e1000_update_mc_addr_list(hw, NULL, 0); + return 0; + } + mta_list = kzalloc(count * 6, GFP_ATOMIC); + if (!mta_list) + return -ENOMEM; + + /* The shared function expects a packed array of only addresses. */ + i = 0; + netdev_for_each_mc_addr(ha, netdev) +#ifdef NETDEV_HW_ADDR_T_MULTICAST + memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); +#else + memcpy(mta_list + (i++ * ETH_ALEN), ha->dmi_addr, ETH_ALEN); +#endif +#ifdef CONFIG_IGB_VMDQ_NETDEV + for (vm = 1; vm < adapter->vmdq_pools; vm++) { + if (!adapter->vmdq_netdev[vm]) + break; + if (!netif_running(adapter->vmdq_netdev[vm]) || + !netdev_mc_count(adapter->vmdq_netdev[vm])) + continue; + netdev_for_each_mc_addr(ha, adapter->vmdq_netdev[vm]) +#ifdef NETDEV_HW_ADDR_T_MULTICAST + memcpy(mta_list + (i++ * ETH_ALEN), + ha->addr, ETH_ALEN); +#else + memcpy(mta_list + (i++ * ETH_ALEN), + ha->dmi_addr, ETH_ALEN); +#endif + } +#endif + e1000_update_mc_addr_list(hw, mta_list, i); + kfree(mta_list); + + return count; +} + +void igb_rar_set(struct igb_adapter *adapter, u32 index) +{ + u32 rar_low, rar_high; + struct e1000_hw *hw = &adapter->hw; + u8 *addr = adapter->mac_table[index].addr; + /* HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); + + /* Indicate to hardware the Address is Valid. */ + if (adapter->mac_table[index].state & IGB_MAC_STATE_IN_USE) + rar_high |= E1000_RAH_AV; + + if (hw->mac.type == e1000_82575) + rar_high |= E1000_RAH_POOL_1 * adapter->mac_table[index].queue; + else + rar_high |= E1000_RAH_POOL_1 << adapter->mac_table[index].queue; + + E1000_WRITE_REG(hw, E1000_RAL(index), rar_low); + E1000_WRITE_FLUSH(hw); + E1000_WRITE_REG(hw, E1000_RAH(index), rar_high); + E1000_WRITE_FLUSH(hw); +} + +void igb_full_sync_mac_table(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + for (i = 0; i < hw->mac.rar_entry_count; i++) { + igb_rar_set(adapter, i); + } +} + +void igb_sync_mac_table(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + for (i = 0; i < hw->mac.rar_entry_count; i++) { + if (adapter->mac_table[i].state & IGB_MAC_STATE_MODIFIED) + igb_rar_set(adapter, i); + adapter->mac_table[i].state &= ~(IGB_MAC_STATE_MODIFIED); + } +} + +int igb_available_rars(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i, count = 0; + + for (i = 0; i < hw->mac.rar_entry_count; i++) { + if (adapter->mac_table[i].state == 0) + count++; + } + return count; +} + +#ifdef HAVE_SET_RX_MODE +/** + * igb_write_uc_addr_list - write unicast addresses to RAR table + * @netdev: network interface device structure + * + * Writes unicast address list to the RAR table. + * Returns: -ENOMEM on failure/insufficient address space + * 0 on no addresses written + * X on writing X addresses to the RAR table + **/ +static int igb_write_uc_addr_list(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + unsigned int vfn = adapter->vfs_allocated_count; + int count = 0; + + /* return ENOMEM indicating insufficient memory for addresses */ + if (netdev_uc_count(netdev) > igb_available_rars(adapter)) + return -ENOMEM; + if (!netdev_uc_empty(netdev)) { +#ifdef NETDEV_HW_ADDR_T_UNICAST + struct netdev_hw_addr *ha; +#else + struct dev_mc_list *ha; +#endif + netdev_for_each_uc_addr(ha, netdev) { +#ifdef NETDEV_HW_ADDR_T_UNICAST + igb_del_mac_filter(adapter, ha->addr, vfn); + igb_add_mac_filter(adapter, ha->addr, vfn); +#else + igb_del_mac_filter(adapter, ha->da_addr, vfn); + igb_add_mac_filter(adapter, ha->da_addr, vfn); +#endif + count++; + } + } + return count; +} + +#endif /* HAVE_SET_RX_MODE */ +/** + * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_rx_mode entry point is called whenever the unicast or multicast + * address lists or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper unicast, multicast, + * promiscuous mode, and all-multi behavior. + **/ +static void igb_set_rx_mode(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + unsigned int vfn = adapter->vfs_allocated_count; + u32 rctl, vmolr = 0; + int count; + + /* Check for Promiscuous and All Multicast modes */ + rctl = E1000_READ_REG(hw, E1000_RCTL); + + /* clear the effected bits */ + rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE); + + if (netdev->flags & IFF_PROMISC) { + rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); + vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME); + /* retain VLAN HW filtering if in VT mode */ + if (adapter->vfs_allocated_count || adapter->vmdq_pools) + rctl |= E1000_RCTL_VFE; + } else { + if (netdev->flags & IFF_ALLMULTI) { + rctl |= E1000_RCTL_MPE; + vmolr |= E1000_VMOLR_MPME; + } else { + /* + * Write addresses to the MTA, if the attempt fails + * then we should just turn on promiscuous mode so + * that we can at least receive multicast traffic + */ + count = igb_write_mc_addr_list(netdev); + if (count < 0) { + rctl |= E1000_RCTL_MPE; + vmolr |= E1000_VMOLR_MPME; + } else if (count) { + vmolr |= E1000_VMOLR_ROMPE; + } + } +#ifdef HAVE_SET_RX_MODE + /* + * Write addresses to available RAR registers, if there is not + * sufficient space to store all the addresses then enable + * unicast promiscuous mode + */ + count = igb_write_uc_addr_list(netdev); + if (count < 0) { + rctl |= E1000_RCTL_UPE; + vmolr |= E1000_VMOLR_ROPE; + } +#endif /* HAVE_SET_RX_MODE */ + rctl |= E1000_RCTL_VFE; + } + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + + /* + * In order to support SR-IOV and eventually VMDq it is necessary to set + * the VMOLR to enable the appropriate modes. Without this workaround + * we will have issues with VLAN tag stripping not being done for frames + * that are only arriving because we are the default pool + */ + if (hw->mac.type < e1000_82576) + return; + + vmolr |= E1000_READ_REG(hw, E1000_VMOLR(vfn)) & + ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE); + E1000_WRITE_REG(hw, E1000_VMOLR(vfn), vmolr); + igb_restore_vf_multicasts(adapter); +} + +static void igb_check_wvbr(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 wvbr = 0; + + switch (hw->mac.type) { + case e1000_82576: + case e1000_i350: + if (!(wvbr = E1000_READ_REG(hw, E1000_WVBR))) + return; + break; + default: + break; + } + + adapter->wvbr |= wvbr; +} + +#define IGB_STAGGERED_QUEUE_OFFSET 8 + +static void igb_spoof_check(struct igb_adapter *adapter) +{ + int j; + + if (!adapter->wvbr) + return; + + switch (adapter->hw.mac.type) { + case e1000_82576: + for (j = 0; j < adapter->vfs_allocated_count; j++) { + if (adapter->wvbr & (1 << j) || + adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) { + DPRINTK(DRV, WARNING, + "Spoof event(s) detected on VF %d\n", j); + adapter->wvbr &= + ~((1 << j) | + (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))); + } + } + break; + case e1000_i350: + for (j = 0; j < adapter->vfs_allocated_count; j++) { + if (adapter->wvbr & (1 << j)) { + DPRINTK(DRV, WARNING, + "Spoof event(s) detected on VF %d\n", j); + adapter->wvbr &= ~(1 << j); + } + } + break; + default: + break; + } +} + +/* Need to wait a few seconds after link up to get diagnostic information from + * the phy */ +#ifdef HAVE_TIMER_SETUP +static void igb_update_phy_info(struct timer_list *t) +{ + struct igb_adapter *adapter = from_timer(adapter, t, phy_info_timer); +#else +static void igb_update_phy_info(unsigned long data) +{ + struct igb_adapter *adapter = (struct igb_adapter *) data; +#endif + e1000_get_phy_info(&adapter->hw); +} + +/** + * igb_has_link - check shared code for link and determine up/down + * @adapter: pointer to driver private info + **/ +bool igb_has_link(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + bool link_active = FALSE; + + /* get_link_status is set on LSC (link status) interrupt or + * rx sequence error interrupt. get_link_status will stay + * false until the e1000_check_for_link establishes link + * for copper adapters ONLY + */ + switch (hw->phy.media_type) { + case e1000_media_type_copper: + if (!hw->mac.get_link_status) + return true; + case e1000_media_type_internal_serdes: + e1000_check_for_link(hw); + link_active = !hw->mac.get_link_status; + break; + case e1000_media_type_unknown: + default: + break; + } + + if (((hw->mac.type == e1000_i210) || + (hw->mac.type == e1000_i211)) && + (hw->phy.id == I210_I_PHY_ID)) { + if (!netif_carrier_ok(adapter->netdev)) { + adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; + } else if (!(adapter->flags & IGB_FLAG_NEED_LINK_UPDATE)) { + adapter->flags |= IGB_FLAG_NEED_LINK_UPDATE; + adapter->link_check_timeout = jiffies; + } + } + + return link_active; +} + +/** + * igb_watchdog - Timer Call-back + * @data: pointer to adapter cast into an unsigned long + **/ +#ifdef HAVE_TIMER_SETUP +static void igb_watchdog(struct timer_list *t) +{ + struct igb_adapter *adapter = from_timer(adapter, t, watchdog_timer); +#else +static void igb_watchdog(unsigned long data) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; +#endif + /* Do the rest outside of interrupt context */ + schedule_work(&adapter->watchdog_task); +} + +static void igb_watchdog_task(struct work_struct *work) +{ + struct igb_adapter *adapter = container_of(work, + struct igb_adapter, + watchdog_task); + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 link; + int i; + u32 thstat, ctrl_ext; + u32 connsw; + + link = igb_has_link(adapter); + /* Force link down if we have fiber to swap to */ + if (adapter->flags & IGB_FLAG_MAS_ENABLE) { + if (hw->phy.media_type == e1000_media_type_copper) { + connsw = E1000_READ_REG(hw, E1000_CONNSW); + if (!(connsw & E1000_CONNSW_AUTOSENSE_EN)) + link = 0; + } + } + + if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE) { + if (time_after(jiffies, (adapter->link_check_timeout + HZ))) + adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; + else + link = FALSE; + } + + if (link) { + /* Perform a reset if the media type changed. */ + if (hw->dev_spec._82575.media_changed) { + hw->dev_spec._82575.media_changed = false; + adapter->flags |= IGB_FLAG_MEDIA_RESET; + igb_reset(adapter); + } + + /* Cancel scheduled suspend requests. */ + pm_runtime_resume(netdev->dev.parent); + + if (!netif_carrier_ok(netdev)) { + u32 ctrl; + e1000_get_speed_and_duplex(hw, + &adapter->link_speed, + &adapter->link_duplex); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + /* Links status message must follow this format */ + printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, " + "Flow Control: %s\n", + netdev->name, + adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "Full Duplex" : "Half Duplex", + ((ctrl & E1000_CTRL_TFCE) && + (ctrl & E1000_CTRL_RFCE)) ? "RX/TX": + ((ctrl & E1000_CTRL_RFCE) ? "RX" : + ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None"))); + /* adjust timeout factor according to speed/duplex */ + adapter->tx_timeout_factor = 1; + switch (adapter->link_speed) { + case SPEED_10: + adapter->tx_timeout_factor = 14; + break; + case SPEED_100: + /* maybe add some timeout factor ? */ + break; + default: + break; + } + + netif_carrier_on(netdev); + netif_tx_wake_all_queues(netdev); + + igb_ping_all_vfs(adapter); +#ifdef IFLA_VF_MAX + igb_check_vf_rate_limit(adapter); +#endif /* IFLA_VF_MAX */ + + /* link state has changed, schedule phy info update */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->phy_info_timer, + round_jiffies(jiffies + 2 * HZ)); + } + } else { + if (netif_carrier_ok(netdev)) { + adapter->link_speed = 0; + adapter->link_duplex = 0; + /* check for thermal sensor event on i350 */ + if (hw->mac.type == e1000_i350) { + thstat = E1000_READ_REG(hw, E1000_THSTAT); + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + if ((hw->phy.media_type == + e1000_media_type_copper) && + !(ctrl_ext & + E1000_CTRL_EXT_LINK_MODE_SGMII)) { + if (thstat & E1000_THSTAT_PWR_DOWN) { + printk(KERN_ERR "igb: %s The " + "network adapter was stopped " + "because it overheated.\n", + netdev->name); + } + if (thstat & E1000_THSTAT_LINK_THROTTLE) { + printk(KERN_INFO + "igb: %s The network " + "adapter supported " + "link speed " + "was downshifted " + "because it " + "overheated.\n", + netdev->name); + } + } + } + + /* Links status message must follow this format */ + printk(KERN_INFO "igb: %s NIC Link is Down\n", + netdev->name); + netif_carrier_off(netdev); + netif_tx_stop_all_queues(netdev); + + igb_ping_all_vfs(adapter); + + /* link state has changed, schedule phy info update */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->phy_info_timer, + round_jiffies(jiffies + 2 * HZ)); + /* link is down, time to check for alternate media */ + if (adapter->flags & IGB_FLAG_MAS_ENABLE) { + igb_check_swap_media(adapter); + if (adapter->flags & IGB_FLAG_MEDIA_RESET) { + schedule_work(&adapter->reset_task); + /* return immediately */ + return; + } + } + pm_schedule_suspend(netdev->dev.parent, + MSEC_PER_SEC * 5); + + /* also check for alternate media here */ + } else if (!netif_carrier_ok(netdev) && + (adapter->flags & IGB_FLAG_MAS_ENABLE)) { + hw->mac.ops.power_up_serdes(hw); + igb_check_swap_media(adapter); + if (adapter->flags & IGB_FLAG_MEDIA_RESET) { + schedule_work(&adapter->reset_task); + /* return immediately */ + return; + } + } + } + + igb_update_stats(adapter); + + for (i = 0; i < adapter->num_tx_queues; i++) { + struct igb_ring *tx_ring = adapter->tx_ring[i]; + if (!netif_carrier_ok(netdev)) { + /* We've lost link, so the controller stops DMA, + * but we've got queued Tx work that's never going + * to get done, so reset controller to flush Tx. + * (Do the reset outside of interrupt context). */ + if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) { + adapter->tx_timeout_count++; + schedule_work(&adapter->reset_task); + /* return immediately since reset is imminent */ + return; + } + } + + /* Force detection of hung controller every watchdog period */ + set_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags); + } + + /* Cause software interrupt to ensure rx ring is cleaned */ + if (adapter->msix_entries) { + u32 eics = 0; + for (i = 0; i < adapter->num_q_vectors; i++) + eics |= adapter->q_vector[i]->eims_value; + E1000_WRITE_REG(hw, E1000_EICS, eics); + } else { + E1000_WRITE_REG(hw, E1000_ICS, E1000_ICS_RXDMT0); + } + + igb_spoof_check(adapter); + + /* Reset the timer */ + if (!test_bit(__IGB_DOWN, &adapter->state)) { + if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE) + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + HZ)); + else + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + 2 * HZ)); + } +} + +static void igb_dma_err_task(struct work_struct *work) +{ + struct igb_adapter *adapter = container_of(work, + struct igb_adapter, + dma_err_task); + int vf; + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 hgptc; + u32 ciaa, ciad; + + hgptc = E1000_READ_REG(hw, E1000_HGPTC); + if (hgptc) /* If incrementing then no need for the check below */ + goto dma_timer_reset; + /* + * Check to see if a bad DMA write target from an errant or + * malicious VF has caused a PCIe error. If so then we can + * issue a VFLR to the offending VF(s) and then resume without + * requesting a full slot reset. + */ + + for (vf = 0; vf < adapter->vfs_allocated_count; vf++) { + ciaa = (vf << 16) | 0x80000000; + /* 32 bit read so align, we really want status at offset 6 */ + ciaa |= PCI_COMMAND; + E1000_WRITE_REG(hw, E1000_CIAA, ciaa); + ciad = E1000_READ_REG(hw, E1000_CIAD); + ciaa &= 0x7FFFFFFF; + /* disable debug mode asap after reading data */ + E1000_WRITE_REG(hw, E1000_CIAA, ciaa); + /* Get the upper 16 bits which will be the PCI status reg */ + ciad >>= 16; + if (ciad & (PCI_STATUS_REC_MASTER_ABORT | + PCI_STATUS_REC_TARGET_ABORT | + PCI_STATUS_SIG_SYSTEM_ERROR)) { + netdev_err(netdev, "VF %d suffered error\n", vf); + /* Issue VFLR */ + ciaa = (vf << 16) | 0x80000000; + ciaa |= 0xA8; + E1000_WRITE_REG(hw, E1000_CIAA, ciaa); + ciad = 0x00008000; /* VFLR */ + E1000_WRITE_REG(hw, E1000_CIAD, ciad); + ciaa &= 0x7FFFFFFF; + E1000_WRITE_REG(hw, E1000_CIAA, ciaa); + } + } +dma_timer_reset: + /* Reset the timer */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->dma_err_timer, + round_jiffies(jiffies + HZ / 10)); +} + +/** + * igb_dma_err_timer - Timer Call-back + * @data: pointer to adapter cast into an unsigned long + **/ +#ifdef HAVE_TIMER_SETUP +static void igb_dma_err_timer(struct timer_list *t) +{ + struct igb_adapter *adapter = from_timer(adapter, t, dma_err_timer); +#else +static void igb_dma_err_timer(unsigned long data) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; +#endif + /* Do the rest outside of interrupt context */ + schedule_work(&adapter->dma_err_task); +} + +enum latency_range { + lowest_latency = 0, + low_latency = 1, + bulk_latency = 2, + latency_invalid = 255 +}; + +/** + * igb_update_ring_itr - update the dynamic ITR value based on packet size + * + * Stores a new ITR value based on strictly on packet size. This + * algorithm is less sophisticated than that used in igb_update_itr, + * due to the difficulty of synchronizing statistics across multiple + * receive rings. The divisors and thresholds used by this function + * were determined based on theoretical maximum wire speed and testing + * data, in order to minimize response time while increasing bulk + * throughput. + * This functionality is controlled by the InterruptThrottleRate module + * parameter (see igb_param.c) + * NOTE: This function is called only when operating in a multiqueue + * receive environment. + * @q_vector: pointer to q_vector + **/ +static void igb_update_ring_itr(struct igb_q_vector *q_vector) +{ + int new_val = q_vector->itr_val; + int avg_wire_size = 0; + struct igb_adapter *adapter = q_vector->adapter; + unsigned int packets; + + /* For non-gigabit speeds, just fix the interrupt rate at 4000 + * ints/sec - ITR timer value of 120 ticks. + */ + switch (adapter->link_speed) { + case SPEED_10: + case SPEED_100: + new_val = IGB_4K_ITR; + goto set_itr_val; + default: + break; + } + + packets = q_vector->rx.total_packets; + if (packets) + avg_wire_size = q_vector->rx.total_bytes / packets; + + packets = q_vector->tx.total_packets; + if (packets) + avg_wire_size = max_t(u32, avg_wire_size, + q_vector->tx.total_bytes / packets); + + /* if avg_wire_size isn't set no work was done */ + if (!avg_wire_size) + goto clear_counts; + + /* Add 24 bytes to size to account for CRC, preamble, and gap */ + avg_wire_size += 24; + + /* Don't starve jumbo frames */ + avg_wire_size = min(avg_wire_size, 3000); + + /* Give a little boost to mid-size frames */ + if ((avg_wire_size > 300) && (avg_wire_size < 1200)) + new_val = avg_wire_size / 3; + else + new_val = avg_wire_size / 2; + + /* conservative mode (itr 3) eliminates the lowest_latency setting */ + if (new_val < IGB_20K_ITR && + ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || + (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) + new_val = IGB_20K_ITR; + +set_itr_val: + if (new_val != q_vector->itr_val) { + q_vector->itr_val = new_val; + q_vector->set_itr = 1; + } +clear_counts: + q_vector->rx.total_bytes = 0; + q_vector->rx.total_packets = 0; + q_vector->tx.total_bytes = 0; + q_vector->tx.total_packets = 0; +} + +/** + * igb_update_itr - update the dynamic ITR value based on statistics + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. + * this functionality is controlled by the InterruptThrottleRate module + * parameter (see igb_param.c) + * NOTE: These calculations are only valid when operating in a single- + * queue environment. + * @q_vector: pointer to q_vector + * @ring_container: ring info to update the itr for + **/ +static void igb_update_itr(struct igb_q_vector *q_vector, + struct igb_ring_container *ring_container) +{ + unsigned int packets = ring_container->total_packets; + unsigned int bytes = ring_container->total_bytes; + u8 itrval = ring_container->itr; + + /* no packets, exit with status unchanged */ + if (packets == 0) + return; + + switch (itrval) { + case lowest_latency: + /* handle TSO and jumbo frames */ + if (bytes/packets > 8000) + itrval = bulk_latency; + else if ((packets < 5) && (bytes > 512)) + itrval = low_latency; + break; + case low_latency: /* 50 usec aka 20000 ints/s */ + if (bytes > 10000) { + /* this if handles the TSO accounting */ + if (bytes/packets > 8000) { + itrval = bulk_latency; + } else if ((packets < 10) || ((bytes/packets) > 1200)) { + itrval = bulk_latency; + } else if (packets > 35) { + itrval = lowest_latency; + } + } else if (bytes/packets > 2000) { + itrval = bulk_latency; + } else if (packets <= 2 && bytes < 512) { + itrval = lowest_latency; + } + break; + case bulk_latency: /* 250 usec aka 4000 ints/s */ + if (bytes > 25000) { + if (packets > 35) + itrval = low_latency; + } else if (bytes < 1500) { + itrval = low_latency; + } + break; + } + + /* clear work counters since we have the values we need */ + ring_container->total_bytes = 0; + ring_container->total_packets = 0; + + /* write updated itr to ring container */ + ring_container->itr = itrval; +} + +static void igb_set_itr(struct igb_q_vector *q_vector) +{ + struct igb_adapter *adapter = q_vector->adapter; + u32 new_itr = q_vector->itr_val; + u8 current_itr = 0; + + /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ + switch (adapter->link_speed) { + case SPEED_10: + case SPEED_100: + current_itr = 0; + new_itr = IGB_4K_ITR; + goto set_itr_now; + default: + break; + } + + igb_update_itr(q_vector, &q_vector->tx); + igb_update_itr(q_vector, &q_vector->rx); + + current_itr = max(q_vector->rx.itr, q_vector->tx.itr); + + /* conservative mode (itr 3) eliminates the lowest_latency setting */ + if (current_itr == lowest_latency && + ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || + (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) + current_itr = low_latency; + + switch (current_itr) { + /* counts and packets in update_itr are dependent on these numbers */ + case lowest_latency: + new_itr = IGB_70K_ITR; /* 70,000 ints/sec */ + break; + case low_latency: + new_itr = IGB_20K_ITR; /* 20,000 ints/sec */ + break; + case bulk_latency: + new_itr = IGB_4K_ITR; /* 4,000 ints/sec */ + break; + default: + break; + } + +set_itr_now: + if (new_itr != q_vector->itr_val) { + /* this attempts to bias the interrupt rate towards Bulk + * by adding intermediate steps when interrupt rate is + * increasing */ + new_itr = new_itr > q_vector->itr_val ? + max((new_itr * q_vector->itr_val) / + (new_itr + (q_vector->itr_val >> 2)), + new_itr) : + new_itr; + /* Don't write the value here; it resets the adapter's + * internal timer, and causes us to delay far longer than + * we should between interrupts. Instead, we write the ITR + * value at the beginning of the next interrupt so the timing + * ends up being correct. + */ + q_vector->itr_val = new_itr; + q_vector->set_itr = 1; + } +} + +void igb_tx_ctxtdesc(struct igb_ring *tx_ring, u32 vlan_macip_lens, + u32 type_tucmd, u32 mss_l4len_idx) +{ + struct e1000_adv_tx_context_desc *context_desc; + u16 i = tx_ring->next_to_use; + + context_desc = IGB_TX_CTXTDESC(tx_ring, i); + + i++; + tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; + + /* set bits to identify this as an advanced context descriptor */ + type_tucmd |= E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT; + + /* For 82575, context index must be unique per ring. */ + if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags)) + mss_l4len_idx |= tx_ring->reg_idx << 4; + + context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens); + context_desc->seqnum_seed = 0; + context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd); + context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); +} + +static int igb_tso(struct igb_ring *tx_ring, + struct igb_tx_buffer *first, + u8 *hdr_len) +{ +#ifdef NETIF_F_TSO + struct sk_buff *skb = first->skb; + u32 vlan_macip_lens, type_tucmd; + u32 mss_l4len_idx, l4len; + + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; + + if (!skb_is_gso(skb)) +#endif /* NETIF_F_TSO */ + return 0; +#ifdef NETIF_F_TSO + + if (skb_header_cloned(skb)) { + int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (err) + return err; + } + + /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ + type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP; + + if (first->protocol == __constant_htons(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + iph->tot_len = 0; + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, 0, + IPPROTO_TCP, + 0); + type_tucmd |= E1000_ADVTXD_TUCMD_IPV4; + first->tx_flags |= IGB_TX_FLAGS_TSO | + IGB_TX_FLAGS_CSUM | + IGB_TX_FLAGS_IPV4; +#ifdef NETIF_F_TSO6 + } else if (skb_is_gso_v6(skb)) { + ipv6_hdr(skb)->payload_len = 0; + tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + first->tx_flags |= IGB_TX_FLAGS_TSO | + IGB_TX_FLAGS_CSUM; +#endif + } + + /* compute header lengths */ + l4len = tcp_hdrlen(skb); + *hdr_len = skb_transport_offset(skb) + l4len; + + /* update gso size and bytecount with header size */ + first->gso_segs = skb_shinfo(skb)->gso_segs; + first->bytecount += (first->gso_segs - 1) * *hdr_len; + + /* MSS L4LEN IDX */ + mss_l4len_idx = l4len << E1000_ADVTXD_L4LEN_SHIFT; + mss_l4len_idx |= skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT; + + /* VLAN MACLEN IPLEN */ + vlan_macip_lens = skb_network_header_len(skb); + vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT; + vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK; + + igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx); + + return 1; +#endif /* NETIF_F_TSO */ +} + +static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first) +{ + struct sk_buff *skb = first->skb; + u32 vlan_macip_lens = 0; + u32 mss_l4len_idx = 0; + u32 type_tucmd = 0; + + if (skb->ip_summed != CHECKSUM_PARTIAL) { + if (!(first->tx_flags & IGB_TX_FLAGS_VLAN)) + return; + } else { + u8 nexthdr = 0; + switch (first->protocol) { + case __constant_htons(ETH_P_IP): + vlan_macip_lens |= skb_network_header_len(skb); + type_tucmd |= E1000_ADVTXD_TUCMD_IPV4; + nexthdr = ip_hdr(skb)->protocol; + break; +#ifdef NETIF_F_IPV6_CSUM + case __constant_htons(ETH_P_IPV6): + vlan_macip_lens |= skb_network_header_len(skb); + nexthdr = ipv6_hdr(skb)->nexthdr; + break; +#endif + default: + if (unlikely(net_ratelimit())) { + dev_warn(tx_ring->dev, + "partial checksum but proto=%x!\n", + first->protocol); + } + break; + } + + switch (nexthdr) { + case IPPROTO_TCP: + type_tucmd |= E1000_ADVTXD_TUCMD_L4T_TCP; + mss_l4len_idx = tcp_hdrlen(skb) << + E1000_ADVTXD_L4LEN_SHIFT; + break; +#ifdef HAVE_SCTP + case IPPROTO_SCTP: + type_tucmd |= E1000_ADVTXD_TUCMD_L4T_SCTP; + mss_l4len_idx = sizeof(struct sctphdr) << + E1000_ADVTXD_L4LEN_SHIFT; + break; +#endif + case IPPROTO_UDP: + mss_l4len_idx = sizeof(struct udphdr) << + E1000_ADVTXD_L4LEN_SHIFT; + break; + default: + if (unlikely(net_ratelimit())) { + dev_warn(tx_ring->dev, + "partial checksum but l4 proto=%x!\n", + nexthdr); + } + break; + } + + /* update TX checksum flag */ + first->tx_flags |= IGB_TX_FLAGS_CSUM; + } + + vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT; + vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK; + + igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx); +} + +#define IGB_SET_FLAG(_input, _flag, _result) \ + ((_flag <= _result) ? \ + ((u32)(_input & _flag) * (_result / _flag)) : \ + ((u32)(_input & _flag) / (_flag / _result))) + +static u32 igb_tx_cmd_type(struct sk_buff *skb, u32 tx_flags) +{ + /* set type for advanced descriptor with frame checksum insertion */ + u32 cmd_type = E1000_ADVTXD_DTYP_DATA | + E1000_ADVTXD_DCMD_DEXT | + E1000_ADVTXD_DCMD_IFCS; + + /* set HW vlan bit if vlan is present */ + cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_VLAN, + (E1000_ADVTXD_DCMD_VLE)); + + /* set segmentation bits for TSO */ + cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSO, + (E1000_ADVTXD_DCMD_TSE)); + + /* set timestamp bit if present */ + cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSTAMP, + (E1000_ADVTXD_MAC_TSTAMP)); + + return cmd_type; +} + +static void igb_tx_olinfo_status(struct igb_ring *tx_ring, + union e1000_adv_tx_desc *tx_desc, + u32 tx_flags, unsigned int paylen) +{ + u32 olinfo_status = paylen << E1000_ADVTXD_PAYLEN_SHIFT; + + /* 82575 requires a unique index per ring */ + if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags)) + olinfo_status |= tx_ring->reg_idx << 4; + + /* insert L4 checksum */ + olinfo_status |= IGB_SET_FLAG(tx_flags, + IGB_TX_FLAGS_CSUM, + (E1000_TXD_POPTS_TXSM << 8)); + + /* insert IPv4 checksum */ + olinfo_status |= IGB_SET_FLAG(tx_flags, + IGB_TX_FLAGS_IPV4, + (E1000_TXD_POPTS_IXSM << 8)); + + tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); +} + +static void igb_tx_map(struct igb_ring *tx_ring, + struct igb_tx_buffer *first, + const u8 hdr_len) +{ + struct sk_buff *skb = first->skb; + struct igb_tx_buffer *tx_buffer; + union e1000_adv_tx_desc *tx_desc; + struct skb_frag_struct *frag; + dma_addr_t dma; + unsigned int data_len, size; + u32 tx_flags = first->tx_flags; + u32 cmd_type = igb_tx_cmd_type(skb, tx_flags); + u16 i = tx_ring->next_to_use; + + tx_desc = IGB_TX_DESC(tx_ring, i); + + igb_tx_olinfo_status(tx_ring, tx_desc, tx_flags, skb->len - hdr_len); + + size = skb_headlen(skb); + data_len = skb->data_len; + + dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); + + tx_buffer = first; + + for (frag = &skb_shinfo(skb)->frags[0];; frag++) { + if (dma_mapping_error(tx_ring->dev, dma)) + goto dma_error; + + /* record length, and DMA address */ + dma_unmap_len_set(tx_buffer, len, size); + dma_unmap_addr_set(tx_buffer, dma, dma); + + tx_desc->read.buffer_addr = cpu_to_le64(dma); + + while (unlikely(size > IGB_MAX_DATA_PER_TXD)) { + tx_desc->read.cmd_type_len = + cpu_to_le32(cmd_type ^ IGB_MAX_DATA_PER_TXD); + + i++; + tx_desc++; + if (i == tx_ring->count) { + tx_desc = IGB_TX_DESC(tx_ring, 0); + i = 0; + } + tx_desc->read.olinfo_status = 0; + + dma += IGB_MAX_DATA_PER_TXD; + size -= IGB_MAX_DATA_PER_TXD; + + tx_desc->read.buffer_addr = cpu_to_le64(dma); + } + + if (likely(!data_len)) + break; + + tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size); + + i++; + tx_desc++; + if (i == tx_ring->count) { + tx_desc = IGB_TX_DESC(tx_ring, 0); + i = 0; + } + tx_desc->read.olinfo_status = 0; + + size = skb_frag_size(frag); + data_len -= size; + + dma = skb_frag_dma_map(tx_ring->dev, frag, 0, + size, DMA_TO_DEVICE); + + tx_buffer = &tx_ring->tx_buffer_info[i]; + } + + /* write last descriptor with RS and EOP bits */ + cmd_type |= size | IGB_TXD_DCMD; + tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type); + + netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); + /* set the timestamp */ + first->time_stamp = jiffies; + + /* + * Force memory writes to complete before letting h/w know there + * are new descriptors to fetch. (Only applicable for weak-ordered + * memory model archs, such as IA-64). + * + * We also need this memory barrier to make certain all of the + * status bits have been updated before next_to_watch is written. + */ + wmb(); + + /* set next_to_watch value indicating a packet is present */ + first->next_to_watch = tx_desc; + + i++; + if (i == tx_ring->count) + i = 0; + + tx_ring->next_to_use = i; + + writel(i, tx_ring->tail); + + /* we need this if more than one processor can write to our tail + * at a time, it syncronizes IO on IA64/Altix systems */ + mmiowb(); + + return; + +dma_error: + dev_err(tx_ring->dev, "TX DMA map failed\n"); + + /* clear dma mappings for failed tx_buffer_info map */ + for (;;) { + tx_buffer = &tx_ring->tx_buffer_info[i]; + igb_unmap_and_free_tx_resource(tx_ring, tx_buffer); + if (tx_buffer == first) + break; + if (i == 0) + i = tx_ring->count; + i--; + } + + tx_ring->next_to_use = i; +} + +static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size) +{ + struct net_device *netdev = netdev_ring(tx_ring); + + if (netif_is_multiqueue(netdev)) + netif_stop_subqueue(netdev, ring_queue_index(tx_ring)); + else + netif_stop_queue(netdev); + + /* Herbert's original patch had: + * smp_mb__after_netif_stop_queue(); + * but since that doesn't exist yet, just open code it. */ + smp_mb(); + + /* We need to check again in a case another CPU has just + * made room available. */ + if (igb_desc_unused(tx_ring) < size) + return -EBUSY; + + /* A reprieve! */ + if (netif_is_multiqueue(netdev)) + netif_wake_subqueue(netdev, ring_queue_index(tx_ring)); + else + netif_wake_queue(netdev); + + tx_ring->tx_stats.restart_queue++; + + return 0; +} + +static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size) +{ + if (igb_desc_unused(tx_ring) >= size) + return 0; + return __igb_maybe_stop_tx(tx_ring, size); +} + +netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb, + struct igb_ring *tx_ring) +{ + struct igb_tx_buffer *first; + int tso; + u32 tx_flags = 0; +#if PAGE_SIZE > IGB_MAX_DATA_PER_TXD + unsigned short f; +#endif + u16 count = TXD_USE_COUNT(skb_headlen(skb)); + __be16 protocol = vlan_get_protocol(skb); + u8 hdr_len = 0; + + /* + * need: 1 descriptor per page * PAGE_SIZE/IGB_MAX_DATA_PER_TXD, + * + 1 desc for skb_headlen/IGB_MAX_DATA_PER_TXD, + * + 2 desc gap to keep tail from touching head, + * + 1 desc for context descriptor, + * otherwise try next time + */ +#if PAGE_SIZE > IGB_MAX_DATA_PER_TXD + for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) + count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); +#else + count += skb_shinfo(skb)->nr_frags; +#endif + if (igb_maybe_stop_tx(tx_ring, count + 3)) { + /* this is a hard error */ + return NETDEV_TX_BUSY; + } + + /* record the location of the first descriptor for this packet */ + first = &tx_ring->tx_buffer_info[tx_ring->next_to_use]; + first->skb = skb; + first->bytecount = skb->len; + first->gso_segs = 1; + + skb_tx_timestamp(skb); + +#ifdef HAVE_PTP_1588_CLOCK + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) { + struct igb_adapter *adapter = netdev_priv(tx_ring->netdev); + if (!adapter->ptp_tx_skb) { + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + tx_flags |= IGB_TX_FLAGS_TSTAMP; + + adapter->ptp_tx_skb = skb_get(skb); + adapter->ptp_tx_start = jiffies; + if (adapter->hw.mac.type == e1000_82576) + schedule_work(&adapter->ptp_tx_work); + } + } +#endif /* HAVE_PTP_1588_CLOCK */ + + if (vlan_tx_tag_present(skb)) { + tx_flags |= IGB_TX_FLAGS_VLAN; + tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT); + } + + /* record initial flags and protocol */ + first->tx_flags = tx_flags; + first->protocol = protocol; + + tso = igb_tso(tx_ring, first, &hdr_len); + if (tso < 0) + goto out_drop; + else if (!tso) + igb_tx_csum(tx_ring, first); + + igb_tx_map(tx_ring, first, hdr_len); + +#ifndef HAVE_TRANS_START_IN_QUEUE + netdev_ring(tx_ring)->trans_start = jiffies; + +#endif + /* Make sure there is space in the ring for the next send. */ + igb_maybe_stop_tx(tx_ring, DESC_NEEDED); + + return NETDEV_TX_OK; + +out_drop: + igb_unmap_and_free_tx_resource(tx_ring, first); + + return NETDEV_TX_OK; +} + +#ifdef HAVE_TX_MQ +static inline struct igb_ring *igb_tx_queue_mapping(struct igb_adapter *adapter, + struct sk_buff *skb) +{ + unsigned int r_idx = skb->queue_mapping; + + if (r_idx >= adapter->num_tx_queues) + r_idx = r_idx % adapter->num_tx_queues; + + return adapter->tx_ring[r_idx]; +} +#else +#define igb_tx_queue_mapping(_adapter, _skb) (_adapter)->tx_ring[0] +#endif + +static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, + struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + if (test_bit(__IGB_DOWN, &adapter->state)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (skb->len <= 0) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + /* + * The minimum packet size with TCTL.PSP set is 17 so pad the skb + * in order to meet this minimum size requirement. + */ + if (skb->len < 17) { + if (skb_padto(skb, 17)) + return NETDEV_TX_OK; + skb->len = 17; + } + + return igb_xmit_frame_ring(skb, igb_tx_queue_mapping(adapter, skb)); +} + +/** + * igb_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + **/ +static void igb_tx_timeout(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + /* Do the reset outside of interrupt context */ + adapter->tx_timeout_count++; + + if (hw->mac.type >= e1000_82580) + hw->dev_spec._82575.global_device_reset = true; + + schedule_work(&adapter->reset_task); + E1000_WRITE_REG(hw, E1000_EICS, + (adapter->eims_enable_mask & ~adapter->eims_other)); +} + +static void igb_reset_task(struct work_struct *work) +{ + struct igb_adapter *adapter; + adapter = container_of(work, struct igb_adapter, reset_task); + + igb_reinit_locked(adapter); +} + +/** + * igb_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are updated here and also from the timer callback. + **/ +static struct net_device_stats *igb_get_stats(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + if (!test_bit(__IGB_RESETTING, &adapter->state)) + igb_update_stats(adapter); + +#ifdef HAVE_NETDEV_STATS_IN_NETDEV + /* only return the current stats */ + return &netdev->stats; +#else + /* only return the current stats */ + return &adapter->net_stats; +#endif /* HAVE_NETDEV_STATS_IN_NETDEV */ +} + +/** + * igb_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + **/ +static int igb_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + + if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { + dev_err(pci_dev_to_dev(pdev), "Invalid MTU setting\n"); + return -EINVAL; + } + +#define MAX_STD_JUMBO_FRAME_SIZE 9238 + if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { + dev_err(pci_dev_to_dev(pdev), "MTU > 9216 not supported.\n"); + return -EINVAL; + } + + /* adjust max frame to be at least the size of a standard frame */ + if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN)) + max_frame = ETH_FRAME_LEN + ETH_FCS_LEN; + + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + + /* igb_down has a dependency on max_frame_size */ + adapter->max_frame_size = max_frame; + + if (netif_running(netdev)) + igb_down(adapter); + + dev_info(pci_dev_to_dev(pdev), "changing MTU from %d to %d\n", + netdev->mtu, new_mtu); + netdev->mtu = new_mtu; + hw->dev_spec._82575.mtu = new_mtu; + + if (netif_running(netdev)) + igb_up(adapter); + else + igb_reset(adapter); + + clear_bit(__IGB_RESETTING, &adapter->state); + + return 0; +} + +/** + * igb_update_stats - Update the board statistics counters + * @adapter: board private structure + **/ + +void igb_update_stats(struct igb_adapter *adapter) +{ +#ifdef HAVE_NETDEV_STATS_IN_NETDEV + struct net_device_stats *net_stats = &adapter->netdev->stats; +#else + struct net_device_stats *net_stats = &adapter->net_stats; +#endif /* HAVE_NETDEV_STATS_IN_NETDEV */ + struct e1000_hw *hw = &adapter->hw; +#ifdef HAVE_PCI_ERS + struct pci_dev *pdev = adapter->pdev; +#endif + u32 reg, mpc; + u16 phy_tmp; + int i; + u64 bytes, packets; +#ifndef IGB_NO_LRO + u32 flushed = 0, coal = 0; + struct igb_q_vector *q_vector; +#endif + +#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF + + /* + * Prevent stats update while adapter is being reset, or if the pci + * connection is down. + */ + if (adapter->link_speed == 0) + return; +#ifdef HAVE_PCI_ERS + if (pci_channel_offline(pdev)) + return; + +#endif +#ifndef IGB_NO_LRO + for (i = 0; i < adapter->num_q_vectors; i++) { + q_vector = adapter->q_vector[i]; + if (!q_vector) + continue; + flushed += q_vector->lrolist.stats.flushed; + coal += q_vector->lrolist.stats.coal; + } + adapter->lro_stats.flushed = flushed; + adapter->lro_stats.coal = coal; + +#endif + bytes = 0; + packets = 0; + for (i = 0; i < adapter->num_rx_queues; i++) { + u32 rqdpc_tmp = E1000_READ_REG(hw, E1000_RQDPC(i)) & 0x0FFF; + struct igb_ring *ring = adapter->rx_ring[i]; + ring->rx_stats.drops += rqdpc_tmp; + net_stats->rx_fifo_errors += rqdpc_tmp; +#ifdef CONFIG_IGB_VMDQ_NETDEV + if (!ring->vmdq_netdev) { + bytes += ring->rx_stats.bytes; + packets += ring->rx_stats.packets; + } +#else + bytes += ring->rx_stats.bytes; + packets += ring->rx_stats.packets; +#endif + } + + net_stats->rx_bytes = bytes; + net_stats->rx_packets = packets; + + bytes = 0; + packets = 0; + for (i = 0; i < adapter->num_tx_queues; i++) { + struct igb_ring *ring = adapter->tx_ring[i]; +#ifdef CONFIG_IGB_VMDQ_NETDEV + if (!ring->vmdq_netdev) { + bytes += ring->tx_stats.bytes; + packets += ring->tx_stats.packets; + } +#else + bytes += ring->tx_stats.bytes; + packets += ring->tx_stats.packets; +#endif + } + net_stats->tx_bytes = bytes; + net_stats->tx_packets = packets; + + /* read stats registers */ + adapter->stats.crcerrs += E1000_READ_REG(hw, E1000_CRCERRS); + adapter->stats.gprc += E1000_READ_REG(hw, E1000_GPRC); + adapter->stats.gorc += E1000_READ_REG(hw, E1000_GORCL); + E1000_READ_REG(hw, E1000_GORCH); /* clear GORCL */ + adapter->stats.bprc += E1000_READ_REG(hw, E1000_BPRC); + adapter->stats.mprc += E1000_READ_REG(hw, E1000_MPRC); + adapter->stats.roc += E1000_READ_REG(hw, E1000_ROC); + + adapter->stats.prc64 += E1000_READ_REG(hw, E1000_PRC64); + adapter->stats.prc127 += E1000_READ_REG(hw, E1000_PRC127); + adapter->stats.prc255 += E1000_READ_REG(hw, E1000_PRC255); + adapter->stats.prc511 += E1000_READ_REG(hw, E1000_PRC511); + adapter->stats.prc1023 += E1000_READ_REG(hw, E1000_PRC1023); + adapter->stats.prc1522 += E1000_READ_REG(hw, E1000_PRC1522); + adapter->stats.symerrs += E1000_READ_REG(hw, E1000_SYMERRS); + adapter->stats.sec += E1000_READ_REG(hw, E1000_SEC); + + mpc = E1000_READ_REG(hw, E1000_MPC); + adapter->stats.mpc += mpc; + net_stats->rx_fifo_errors += mpc; + adapter->stats.scc += E1000_READ_REG(hw, E1000_SCC); + adapter->stats.ecol += E1000_READ_REG(hw, E1000_ECOL); + adapter->stats.mcc += E1000_READ_REG(hw, E1000_MCC); + adapter->stats.latecol += E1000_READ_REG(hw, E1000_LATECOL); + adapter->stats.dc += E1000_READ_REG(hw, E1000_DC); + adapter->stats.rlec += E1000_READ_REG(hw, E1000_RLEC); + adapter->stats.xonrxc += E1000_READ_REG(hw, E1000_XONRXC); + adapter->stats.xontxc += E1000_READ_REG(hw, E1000_XONTXC); + adapter->stats.xoffrxc += E1000_READ_REG(hw, E1000_XOFFRXC); + adapter->stats.xofftxc += E1000_READ_REG(hw, E1000_XOFFTXC); + adapter->stats.fcruc += E1000_READ_REG(hw, E1000_FCRUC); + adapter->stats.gptc += E1000_READ_REG(hw, E1000_GPTC); + adapter->stats.gotc += E1000_READ_REG(hw, E1000_GOTCL); + E1000_READ_REG(hw, E1000_GOTCH); /* clear GOTCL */ + adapter->stats.rnbc += E1000_READ_REG(hw, E1000_RNBC); + adapter->stats.ruc += E1000_READ_REG(hw, E1000_RUC); + adapter->stats.rfc += E1000_READ_REG(hw, E1000_RFC); + adapter->stats.rjc += E1000_READ_REG(hw, E1000_RJC); + adapter->stats.tor += E1000_READ_REG(hw, E1000_TORH); + adapter->stats.tot += E1000_READ_REG(hw, E1000_TOTH); + adapter->stats.tpr += E1000_READ_REG(hw, E1000_TPR); + + adapter->stats.ptc64 += E1000_READ_REG(hw, E1000_PTC64); + adapter->stats.ptc127 += E1000_READ_REG(hw, E1000_PTC127); + adapter->stats.ptc255 += E1000_READ_REG(hw, E1000_PTC255); + adapter->stats.ptc511 += E1000_READ_REG(hw, E1000_PTC511); + adapter->stats.ptc1023 += E1000_READ_REG(hw, E1000_PTC1023); + adapter->stats.ptc1522 += E1000_READ_REG(hw, E1000_PTC1522); + + adapter->stats.mptc += E1000_READ_REG(hw, E1000_MPTC); + adapter->stats.bptc += E1000_READ_REG(hw, E1000_BPTC); + + adapter->stats.tpt += E1000_READ_REG(hw, E1000_TPT); + adapter->stats.colc += E1000_READ_REG(hw, E1000_COLC); + + adapter->stats.algnerrc += E1000_READ_REG(hw, E1000_ALGNERRC); + /* read internal phy sepecific stats */ + reg = E1000_READ_REG(hw, E1000_CTRL_EXT); + if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) { + adapter->stats.rxerrc += E1000_READ_REG(hw, E1000_RXERRC); + + /* this stat has invalid values on i210/i211 */ + if ((hw->mac.type != e1000_i210) && + (hw->mac.type != e1000_i211)) + adapter->stats.tncrs += E1000_READ_REG(hw, E1000_TNCRS); + } + adapter->stats.tsctc += E1000_READ_REG(hw, E1000_TSCTC); + adapter->stats.tsctfc += E1000_READ_REG(hw, E1000_TSCTFC); + + adapter->stats.iac += E1000_READ_REG(hw, E1000_IAC); + adapter->stats.icrxoc += E1000_READ_REG(hw, E1000_ICRXOC); + adapter->stats.icrxptc += E1000_READ_REG(hw, E1000_ICRXPTC); + adapter->stats.icrxatc += E1000_READ_REG(hw, E1000_ICRXATC); + adapter->stats.ictxptc += E1000_READ_REG(hw, E1000_ICTXPTC); + adapter->stats.ictxatc += E1000_READ_REG(hw, E1000_ICTXATC); + adapter->stats.ictxqec += E1000_READ_REG(hw, E1000_ICTXQEC); + adapter->stats.ictxqmtc += E1000_READ_REG(hw, E1000_ICTXQMTC); + adapter->stats.icrxdmtc += E1000_READ_REG(hw, E1000_ICRXDMTC); + + /* Fill out the OS statistics structure */ + net_stats->multicast = adapter->stats.mprc; + net_stats->collisions = adapter->stats.colc; + + /* Rx Errors */ + + /* RLEC on some newer hardware can be incorrect so build + * our own version based on RUC and ROC */ + net_stats->rx_errors = adapter->stats.rxerrc + + adapter->stats.crcerrs + adapter->stats.algnerrc + + adapter->stats.ruc + adapter->stats.roc + + adapter->stats.cexterr; + net_stats->rx_length_errors = adapter->stats.ruc + + adapter->stats.roc; + net_stats->rx_crc_errors = adapter->stats.crcerrs; + net_stats->rx_frame_errors = adapter->stats.algnerrc; + net_stats->rx_missed_errors = adapter->stats.mpc; + + /* Tx Errors */ + net_stats->tx_errors = adapter->stats.ecol + + adapter->stats.latecol; + net_stats->tx_aborted_errors = adapter->stats.ecol; + net_stats->tx_window_errors = adapter->stats.latecol; + net_stats->tx_carrier_errors = adapter->stats.tncrs; + + /* Tx Dropped needs to be maintained elsewhere */ + + /* Phy Stats */ + if (hw->phy.media_type == e1000_media_type_copper) { + if ((adapter->link_speed == SPEED_1000) && + (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) { + phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; + adapter->phy_stats.idle_errors += phy_tmp; + } + } + + /* Management Stats */ + adapter->stats.mgptc += E1000_READ_REG(hw, E1000_MGTPTC); + adapter->stats.mgprc += E1000_READ_REG(hw, E1000_MGTPRC); + if (hw->mac.type > e1000_82580) { + adapter->stats.o2bgptc += E1000_READ_REG(hw, E1000_O2BGPTC); + adapter->stats.o2bspc += E1000_READ_REG(hw, E1000_O2BSPC); + adapter->stats.b2ospc += E1000_READ_REG(hw, E1000_B2OSPC); + adapter->stats.b2ogprc += E1000_READ_REG(hw, E1000_B2OGPRC); + } +} + +static irqreturn_t igb_msix_other(int irq, void *data) +{ + struct igb_adapter *adapter = data; + struct e1000_hw *hw = &adapter->hw; + u32 icr = E1000_READ_REG(hw, E1000_ICR); + /* reading ICR causes bit 31 of EICR to be cleared */ + + if (icr & E1000_ICR_DRSTA) + schedule_work(&adapter->reset_task); + + if (icr & E1000_ICR_DOUTSYNC) { + /* HW is reporting DMA is out of sync */ + adapter->stats.doosync++; + /* The DMA Out of Sync is also indication of a spoof event + * in IOV mode. Check the Wrong VM Behavior register to + * see if it is really a spoof event. */ + igb_check_wvbr(adapter); + } + + /* Check for a mailbox event */ + if (icr & E1000_ICR_VMMB) + igb_msg_task(adapter); + + if (icr & E1000_ICR_LSC) { + hw->mac.get_link_status = 1; + /* guard against interrupt when we're going down */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + +#ifdef HAVE_PTP_1588_CLOCK + if (icr & E1000_ICR_TS) { + u32 tsicr = E1000_READ_REG(hw, E1000_TSICR); + + if (tsicr & E1000_TSICR_TXTS) { + /* acknowledge the interrupt */ + E1000_WRITE_REG(hw, E1000_TSICR, E1000_TSICR_TXTS); + /* retrieve hardware timestamp */ + schedule_work(&adapter->ptp_tx_work); + } + } +#endif /* HAVE_PTP_1588_CLOCK */ + + /* Check for MDD event */ + if (icr & E1000_ICR_MDDET) + igb_process_mdd_event(adapter); + + E1000_WRITE_REG(hw, E1000_EIMS, adapter->eims_other); + + return IRQ_HANDLED; +} + +static void igb_write_itr(struct igb_q_vector *q_vector) +{ + struct igb_adapter *adapter = q_vector->adapter; + u32 itr_val = q_vector->itr_val & 0x7FFC; + + if (!q_vector->set_itr) + return; + + if (!itr_val) + itr_val = 0x4; + + if (adapter->hw.mac.type == e1000_82575) + itr_val |= itr_val << 16; + else + itr_val |= E1000_EITR_CNT_IGNR; + + writel(itr_val, q_vector->itr_register); + q_vector->set_itr = 0; +} + +static irqreturn_t igb_msix_ring(int irq, void *data) +{ + struct igb_q_vector *q_vector = data; + + /* Write the ITR value calculated from the previous interrupt. */ + igb_write_itr(q_vector); + + napi_schedule(&q_vector->napi); + + return IRQ_HANDLED; +} + +#ifdef IGB_DCA +static void igb_update_tx_dca(struct igb_adapter *adapter, + struct igb_ring *tx_ring, + int cpu) +{ + struct e1000_hw *hw = &adapter->hw; + u32 txctrl = dca3_get_tag(tx_ring->dev, cpu); + + if (hw->mac.type != e1000_82575) + txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT_82576; + + /* + * We can enable relaxed ordering for reads, but not writes when + * DCA is enabled. This is due to a known issue in some chipsets + * which will cause the DCA tag to be cleared. + */ + txctrl |= E1000_DCA_TXCTRL_DESC_RRO_EN | + E1000_DCA_TXCTRL_DATA_RRO_EN | + E1000_DCA_TXCTRL_DESC_DCA_EN; + + E1000_WRITE_REG(hw, E1000_DCA_TXCTRL(tx_ring->reg_idx), txctrl); +} + +static void igb_update_rx_dca(struct igb_adapter *adapter, + struct igb_ring *rx_ring, + int cpu) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rxctrl = dca3_get_tag(&adapter->pdev->dev, cpu); + + if (hw->mac.type != e1000_82575) + rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT_82576; + + /* + * We can enable relaxed ordering for reads, but not writes when + * DCA is enabled. This is due to a known issue in some chipsets + * which will cause the DCA tag to be cleared. + */ + rxctrl |= E1000_DCA_RXCTRL_DESC_RRO_EN | + E1000_DCA_RXCTRL_DESC_DCA_EN; + + E1000_WRITE_REG(hw, E1000_DCA_RXCTRL(rx_ring->reg_idx), rxctrl); +} + +static void igb_update_dca(struct igb_q_vector *q_vector) +{ + struct igb_adapter *adapter = q_vector->adapter; + int cpu = get_cpu(); + + if (q_vector->cpu == cpu) + goto out_no_update; + + if (q_vector->tx.ring) + igb_update_tx_dca(adapter, q_vector->tx.ring, cpu); + + if (q_vector->rx.ring) + igb_update_rx_dca(adapter, q_vector->rx.ring, cpu); + + q_vector->cpu = cpu; +out_no_update: + put_cpu(); +} + +static void igb_setup_dca(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + + if (!(adapter->flags & IGB_FLAG_DCA_ENABLED)) + return; + + /* Always use CB2 mode, difference is masked in the CB driver. */ + E1000_WRITE_REG(hw, E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2); + + for (i = 0; i < adapter->num_q_vectors; i++) { + adapter->q_vector[i]->cpu = -1; + igb_update_dca(adapter->q_vector[i]); + } +} + +static int __igb_notify_dca(struct device *dev, void *data) +{ + struct net_device *netdev = dev_get_drvdata(dev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + struct e1000_hw *hw = &adapter->hw; + unsigned long event = *(unsigned long *)data; + + switch (event) { + case DCA_PROVIDER_ADD: + /* if already enabled, don't do it again */ + if (adapter->flags & IGB_FLAG_DCA_ENABLED) + break; + if (dca_add_requester(dev) == E1000_SUCCESS) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; + dev_info(pci_dev_to_dev(pdev), "DCA enabled\n"); + igb_setup_dca(adapter); + break; + } + /* Fall Through since DCA is disabled. */ + case DCA_PROVIDER_REMOVE: + if (adapter->flags & IGB_FLAG_DCA_ENABLED) { + /* without this a class_device is left + * hanging around in the sysfs model */ + dca_remove_requester(dev); + dev_info(pci_dev_to_dev(pdev), "DCA disabled\n"); + adapter->flags &= ~IGB_FLAG_DCA_ENABLED; + E1000_WRITE_REG(hw, E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_DISABLE); + } + break; + } + + return E1000_SUCCESS; +} + +static int igb_notify_dca(struct notifier_block *nb, unsigned long event, + void *p) +{ + int ret_val; + + ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event, + __igb_notify_dca); + + return ret_val ? NOTIFY_BAD : NOTIFY_DONE; +} +#endif /* IGB_DCA */ + +static int igb_vf_configure(struct igb_adapter *adapter, int vf) +{ + unsigned char mac_addr[ETH_ALEN]; + + random_ether_addr(mac_addr); + igb_set_vf_mac(adapter, vf, mac_addr); + +#ifdef IFLA_VF_MAX +#ifdef HAVE_VF_SPOOFCHK_CONFIGURE + /* By default spoof check is enabled for all VFs */ + adapter->vf_data[vf].spoofchk_enabled = true; +#endif +#endif + + return true; +} + +static void igb_ping_all_vfs(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ping; + int i; + + for (i = 0 ; i < adapter->vfs_allocated_count; i++) { + ping = E1000_PF_CONTROL_MSG; + if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS) + ping |= E1000_VT_MSGTYPE_CTS; + e1000_write_mbx(hw, &ping, 1, i); + } +} + +/** + * igb_mta_set_ - Set multicast filter table address + * @adapter: pointer to the adapter structure + * @hash_value: determines the MTA register and bit to set + * + * The multicast table address is a register array of 32-bit registers. + * The hash_value is used to determine what register the bit is in, the + * current value is read, the new bit is OR'd in and the new value is + * written back into the register. + **/ +void igb_mta_set(struct igb_adapter *adapter, u32 hash_value) +{ + struct e1000_hw *hw = &adapter->hw; + u32 hash_bit, hash_reg, mta; + + /* + * The MTA is a register array of 32-bit registers. It is + * treated like an array of (32*mta_reg_count) bits. We want to + * set bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The (hw->mac.mta_reg_count - 1) serves as a + * mask to bits 31:5 of the hash value which gives us the + * register we're modifying. The hash bit within that register + * is determined by the lower 5 bits of the hash value. + */ + hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); + hash_bit = hash_value & 0x1F; + + mta = E1000_READ_REG_ARRAY(hw, E1000_MTA, hash_reg); + + mta |= (1 << hash_bit); + + E1000_WRITE_REG_ARRAY(hw, E1000_MTA, hash_reg, mta); + E1000_WRITE_FLUSH(hw); +} + +static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf) +{ + + struct e1000_hw *hw = &adapter->hw; + u32 vmolr = E1000_READ_REG(hw, E1000_VMOLR(vf)); + struct vf_data_storage *vf_data = &adapter->vf_data[vf]; + + vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC | + IGB_VF_FLAG_MULTI_PROMISC); + vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME); + +#ifdef IGB_ENABLE_VF_PROMISC + if (*msgbuf & E1000_VF_SET_PROMISC_UNICAST) { + vmolr |= E1000_VMOLR_ROPE; + vf_data->flags |= IGB_VF_FLAG_UNI_PROMISC; + *msgbuf &= ~E1000_VF_SET_PROMISC_UNICAST; + } +#endif + if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) { + vmolr |= E1000_VMOLR_MPME; + vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC; + *msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST; + } else { + /* + * if we have hashes and we are clearing a multicast promisc + * flag we need to write the hashes to the MTA as this step + * was previously skipped + */ + if (vf_data->num_vf_mc_hashes > 30) { + vmolr |= E1000_VMOLR_MPME; + } else if (vf_data->num_vf_mc_hashes) { + int j; + vmolr |= E1000_VMOLR_ROMPE; + for (j = 0; j < vf_data->num_vf_mc_hashes; j++) + igb_mta_set(adapter, vf_data->vf_mc_hashes[j]); + } + } + + E1000_WRITE_REG(hw, E1000_VMOLR(vf), vmolr); + + /* there are flags left unprocessed, likely not supported */ + if (*msgbuf & E1000_VT_MSGINFO_MASK) + return -EINVAL; + + return 0; + +} + +static int igb_set_vf_multicasts(struct igb_adapter *adapter, + u32 *msgbuf, u32 vf) +{ + int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT; + u16 *hash_list = (u16 *)&msgbuf[1]; + struct vf_data_storage *vf_data = &adapter->vf_data[vf]; + int i; + + /* salt away the number of multicast addresses assigned + * to this VF for later use to restore when the PF multi cast + * list changes + */ + vf_data->num_vf_mc_hashes = n; + + /* only up to 30 hash values supported */ + if (n > 30) + n = 30; + + /* store the hashes for later use */ + for (i = 0; i < n; i++) + vf_data->vf_mc_hashes[i] = hash_list[i]; + + /* Flush and reset the mta with the new values */ + igb_set_rx_mode(adapter->netdev); + + return 0; +} + +static void igb_restore_vf_multicasts(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct vf_data_storage *vf_data; + int i, j; + + for (i = 0; i < adapter->vfs_allocated_count; i++) { + u32 vmolr = E1000_READ_REG(hw, E1000_VMOLR(i)); + vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME); + + vf_data = &adapter->vf_data[i]; + + if ((vf_data->num_vf_mc_hashes > 30) || + (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) { + vmolr |= E1000_VMOLR_MPME; + } else if (vf_data->num_vf_mc_hashes) { + vmolr |= E1000_VMOLR_ROMPE; + for (j = 0; j < vf_data->num_vf_mc_hashes; j++) + igb_mta_set(adapter, vf_data->vf_mc_hashes[j]); + } + E1000_WRITE_REG(hw, E1000_VMOLR(i), vmolr); + } +} + +static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + u32 pool_mask, reg, vid; + u16 vlan_default; + int i; + + pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf); + + /* Find the vlan filter for this id */ + for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { + reg = E1000_READ_REG(hw, E1000_VLVF(i)); + + /* remove the vf from the pool */ + reg &= ~pool_mask; + + /* if pool is empty then remove entry from vfta */ + if (!(reg & E1000_VLVF_POOLSEL_MASK) && + (reg & E1000_VLVF_VLANID_ENABLE)) { + reg = 0; + vid = reg & E1000_VLVF_VLANID_MASK; + igb_vfta_set(adapter, vid, FALSE); + } + + E1000_WRITE_REG(hw, E1000_VLVF(i), reg); + } + + adapter->vf_data[vf].vlans_enabled = 0; + + vlan_default = adapter->vf_data[vf].default_vf_vlan_id; + if (vlan_default) + igb_vlvf_set(adapter, vlan_default, true, vf); +} + +s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + u32 reg, i; + + /* The vlvf table only exists on 82576 hardware and newer */ + if (hw->mac.type < e1000_82576) + return -1; + + /* we only need to do this if VMDq is enabled */ + if (!adapter->vmdq_pools) + return -1; + + /* Find the vlan filter for this id */ + for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { + reg = E1000_READ_REG(hw, E1000_VLVF(i)); + if ((reg & E1000_VLVF_VLANID_ENABLE) && + vid == (reg & E1000_VLVF_VLANID_MASK)) + break; + } + + if (add) { + if (i == E1000_VLVF_ARRAY_SIZE) { + /* Did not find a matching VLAN ID entry that was + * enabled. Search for a free filter entry, i.e. + * one without the enable bit set + */ + for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { + reg = E1000_READ_REG(hw, E1000_VLVF(i)); + if (!(reg & E1000_VLVF_VLANID_ENABLE)) + break; + } + } + if (i < E1000_VLVF_ARRAY_SIZE) { + /* Found an enabled/available entry */ + reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf); + + /* if !enabled we need to set this up in vfta */ + if (!(reg & E1000_VLVF_VLANID_ENABLE)) { + /* add VID to filter table */ + igb_vfta_set(adapter, vid, TRUE); + reg |= E1000_VLVF_VLANID_ENABLE; + } + reg &= ~E1000_VLVF_VLANID_MASK; + reg |= vid; + E1000_WRITE_REG(hw, E1000_VLVF(i), reg); + + /* do not modify RLPML for PF devices */ + if (vf >= adapter->vfs_allocated_count) + return E1000_SUCCESS; + + if (!adapter->vf_data[vf].vlans_enabled) { + u32 size; + reg = E1000_READ_REG(hw, E1000_VMOLR(vf)); + size = reg & E1000_VMOLR_RLPML_MASK; + size += 4; + reg &= ~E1000_VMOLR_RLPML_MASK; + reg |= size; + E1000_WRITE_REG(hw, E1000_VMOLR(vf), reg); + } + + adapter->vf_data[vf].vlans_enabled++; + } + } else { + if (i < E1000_VLVF_ARRAY_SIZE) { + /* remove vf from the pool */ + reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf)); + /* if pool is empty then remove entry from vfta */ + if (!(reg & E1000_VLVF_POOLSEL_MASK)) { + reg = 0; + igb_vfta_set(adapter, vid, FALSE); + } + E1000_WRITE_REG(hw, E1000_VLVF(i), reg); + + /* do not modify RLPML for PF devices */ + if (vf >= adapter->vfs_allocated_count) + return E1000_SUCCESS; + + adapter->vf_data[vf].vlans_enabled--; + if (!adapter->vf_data[vf].vlans_enabled) { + u32 size; + reg = E1000_READ_REG(hw, E1000_VMOLR(vf)); + size = reg & E1000_VMOLR_RLPML_MASK; + size -= 4; + reg &= ~E1000_VMOLR_RLPML_MASK; + reg |= size; + E1000_WRITE_REG(hw, E1000_VMOLR(vf), reg); + } + } + } + return E1000_SUCCESS; +} + +#ifdef IFLA_VF_MAX +static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + + if (vid) + E1000_WRITE_REG(hw, E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT)); + else + E1000_WRITE_REG(hw, E1000_VMVIR(vf), 0); +} + +static int igb_ndo_set_vf_vlan(struct net_device *netdev, +#ifdef HAVE_VF_VLAN_PROTO + int vf, u16 vlan, u8 qos, __be16 vlan_proto) +#else + int vf, u16 vlan, u8 qos) +#endif +{ + int err = 0; + struct igb_adapter *adapter = netdev_priv(netdev); + + /* VLAN IDs accepted range 0-4094 */ + if ((vf >= adapter->vfs_allocated_count) || (vlan > VLAN_VID_MASK-1) || (qos > 7)) + return -EINVAL; + +#ifdef HAVE_VF_VLAN_PROTO + if (vlan_proto != htons(ETH_P_8021Q)) + return -EPROTONOSUPPORT; +#endif + + if (vlan || qos) { + err = igb_vlvf_set(adapter, vlan, !!vlan, vf); + if (err) + goto out; + igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf); + igb_set_vmolr(adapter, vf, !vlan); + adapter->vf_data[vf].pf_vlan = vlan; + adapter->vf_data[vf].pf_qos = qos; + igb_set_vf_vlan_strip(adapter, vf, true); + dev_info(&adapter->pdev->dev, + "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf); + if (test_bit(__IGB_DOWN, &adapter->state)) { + dev_warn(&adapter->pdev->dev, + "The VF VLAN has been set," + " but the PF device is not up.\n"); + dev_warn(&adapter->pdev->dev, + "Bring the PF device up before" + " attempting to use the VF device.\n"); + } + } else { + if (adapter->vf_data[vf].pf_vlan) + dev_info(&adapter->pdev->dev, + "Clearing VLAN on VF %d\n", vf); + igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan, + false, vf); + igb_set_vmvir(adapter, vlan, vf); + igb_set_vmolr(adapter, vf, true); + igb_set_vf_vlan_strip(adapter, vf, false); + adapter->vf_data[vf].pf_vlan = 0; + adapter->vf_data[vf].pf_qos = 0; + } +out: + return err; +} + +#ifdef HAVE_VF_SPOOFCHK_CONFIGURE +static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, + bool setting) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 dtxswc, reg_offset; + + if (!adapter->vfs_allocated_count) + return -EOPNOTSUPP; + + if (vf >= adapter->vfs_allocated_count) + return -EINVAL; + + reg_offset = (hw->mac.type == e1000_82576) ? E1000_DTXSWC : E1000_TXSWC; + dtxswc = E1000_READ_REG(hw, reg_offset); + if (setting) + dtxswc |= ((1 << vf) | + (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT))); + else + dtxswc &= ~((1 << vf) | + (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT))); + E1000_WRITE_REG(hw, reg_offset, dtxswc); + + adapter->vf_data[vf].spoofchk_enabled = setting; + return E1000_SUCCESS; +} +#endif /* HAVE_VF_SPOOFCHK_CONFIGURE */ +#endif /* IFLA_VF_MAX */ + +static int igb_find_vlvf_entry(struct igb_adapter *adapter, int vid) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + u32 reg; + + /* Find the vlan filter for this id */ + for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { + reg = E1000_READ_REG(hw, E1000_VLVF(i)); + if ((reg & E1000_VLVF_VLANID_ENABLE) && + vid == (reg & E1000_VLVF_VLANID_MASK)) + break; + } + + if (i >= E1000_VLVF_ARRAY_SIZE) + i = -1; + + return i; +} + +static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT; + int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK); + int err = 0; + + if (vid) + igb_set_vf_vlan_strip(adapter, vf, true); + else + igb_set_vf_vlan_strip(adapter, vf, false); + + /* If in promiscuous mode we need to make sure the PF also has + * the VLAN filter set. + */ + if (add && (adapter->netdev->flags & IFF_PROMISC)) + err = igb_vlvf_set(adapter, vid, add, + adapter->vfs_allocated_count); + if (err) + goto out; + + err = igb_vlvf_set(adapter, vid, add, vf); + + if (err) + goto out; + + /* Go through all the checks to see if the VLAN filter should + * be wiped completely. + */ + if (!add && (adapter->netdev->flags & IFF_PROMISC)) { + u32 vlvf, bits; + + int regndx = igb_find_vlvf_entry(adapter, vid); + if (regndx < 0) + goto out; + /* See if any other pools are set for this VLAN filter + * entry other than the PF. + */ + vlvf = bits = E1000_READ_REG(hw, E1000_VLVF(regndx)); + bits &= 1 << (E1000_VLVF_POOLSEL_SHIFT + + adapter->vfs_allocated_count); + /* If the filter was removed then ensure PF pool bit + * is cleared if the PF only added itself to the pool + * because the PF is in promiscuous mode. + */ + if ((vlvf & VLAN_VID_MASK) == vid && +#ifndef HAVE_VLAN_RX_REGISTER + !test_bit(vid, adapter->active_vlans) && +#endif + !bits) + igb_vlvf_set(adapter, vid, add, + adapter->vfs_allocated_count); + } + +out: + return err; +} + +static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + + /* clear flags except flag that the PF has set the MAC */ + adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC; + adapter->vf_data[vf].last_nack = jiffies; + + /* reset offloads to defaults */ + igb_set_vmolr(adapter, vf, true); + + /* reset vlans for device */ + igb_clear_vf_vfta(adapter, vf); +#ifdef IFLA_VF_MAX + if (adapter->vf_data[vf].pf_vlan) + igb_ndo_set_vf_vlan(adapter->netdev, vf, + adapter->vf_data[vf].pf_vlan, +#ifdef HAVE_VF_VLAN_PROTO + adapter->vf_data[vf].pf_qos, + htons(ETH_P_8021Q)); +#else + adapter->vf_data[vf].pf_qos); +#endif + else + igb_clear_vf_vfta(adapter, vf); +#endif + + /* reset multicast table array for vf */ + adapter->vf_data[vf].num_vf_mc_hashes = 0; + + /* Flush and reset the mta with the new values */ + igb_set_rx_mode(adapter->netdev); + + /* + * Reset the VFs TDWBAL and TDWBAH registers which are not + * cleared by a VFLR + */ + E1000_WRITE_REG(hw, E1000_TDWBAH(vf), 0); + E1000_WRITE_REG(hw, E1000_TDWBAL(vf), 0); + if (hw->mac.type == e1000_82576) { + E1000_WRITE_REG(hw, E1000_TDWBAH(IGB_MAX_VF_FUNCTIONS + vf), 0); + E1000_WRITE_REG(hw, E1000_TDWBAL(IGB_MAX_VF_FUNCTIONS + vf), 0); + } +} + +static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf) +{ + unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses; + + /* generate a new mac address as we were hotplug removed/added */ + if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC)) + random_ether_addr(vf_mac); + + /* process remaining reset events */ + igb_vf_reset(adapter, vf); +} + +static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses; + u32 reg, msgbuf[3]; + u8 *addr = (u8 *)(&msgbuf[1]); + + /* process all the same items cleared in a function level reset */ + igb_vf_reset(adapter, vf); + + /* set vf mac address */ + igb_del_mac_filter(adapter, vf_mac, vf); + igb_add_mac_filter(adapter, vf_mac, vf); + + /* enable transmit and receive for vf */ + reg = E1000_READ_REG(hw, E1000_VFTE); + E1000_WRITE_REG(hw, E1000_VFTE, reg | (1 << vf)); + reg = E1000_READ_REG(hw, E1000_VFRE); + E1000_WRITE_REG(hw, E1000_VFRE, reg | (1 << vf)); + + adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS; + + /* reply to reset with ack and vf mac address */ + msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK; + memcpy(addr, vf_mac, 6); + e1000_write_mbx(hw, msgbuf, 3, vf); +} + +static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf) +{ + /* + * The VF MAC Address is stored in a packed array of bytes + * starting at the second 32 bit word of the msg array + */ + unsigned char *addr = (unsigned char *)&msg[1]; + int err = -1; + + if (is_valid_ether_addr(addr)) + err = igb_set_vf_mac(adapter, vf, addr); + + return err; +} + +static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + struct vf_data_storage *vf_data = &adapter->vf_data[vf]; + u32 msg = E1000_VT_MSGTYPE_NACK; + + /* if device isn't clear to send it shouldn't be reading either */ + if (!(vf_data->flags & IGB_VF_FLAG_CTS) && + time_after(jiffies, vf_data->last_nack + (2 * HZ))) { + e1000_write_mbx(hw, &msg, 1, vf); + vf_data->last_nack = jiffies; + } +} + +static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf) +{ + struct pci_dev *pdev = adapter->pdev; + u32 msgbuf[E1000_VFMAILBOX_SIZE]; + struct e1000_hw *hw = &adapter->hw; + struct vf_data_storage *vf_data = &adapter->vf_data[vf]; + s32 retval; + + retval = e1000_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf); + + if (retval) { + dev_err(pci_dev_to_dev(pdev), "Error receiving message from VF\n"); + return; + } + + /* this is a message we already processed, do nothing */ + if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK)) + return; + + /* + * until the vf completes a reset it should not be + * allowed to start any configuration. + */ + + if (msgbuf[0] == E1000_VF_RESET) { + igb_vf_reset_msg(adapter, vf); + return; + } + + if (!(vf_data->flags & IGB_VF_FLAG_CTS)) { + msgbuf[0] = E1000_VT_MSGTYPE_NACK; + if (time_after(jiffies, vf_data->last_nack + (2 * HZ))) { + e1000_write_mbx(hw, msgbuf, 1, vf); + vf_data->last_nack = jiffies; + } + return; + } + + switch ((msgbuf[0] & 0xFFFF)) { + case E1000_VF_SET_MAC_ADDR: + retval = -EINVAL; +#ifndef IGB_DISABLE_VF_MAC_SET + if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC)) + retval = igb_set_vf_mac_addr(adapter, msgbuf, vf); + else + DPRINTK(DRV, INFO, + "VF %d attempted to override administratively " + "set MAC address\nReload the VF driver to " + "resume operations\n", vf); +#endif + break; + case E1000_VF_SET_PROMISC: + retval = igb_set_vf_promisc(adapter, msgbuf, vf); + break; + case E1000_VF_SET_MULTICAST: + retval = igb_set_vf_multicasts(adapter, msgbuf, vf); + break; + case E1000_VF_SET_LPE: + retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf); + break; + case E1000_VF_SET_VLAN: + retval = -1; +#ifdef IFLA_VF_MAX + if (vf_data->pf_vlan) + DPRINTK(DRV, INFO, + "VF %d attempted to override administratively " + "set VLAN tag\nReload the VF driver to " + "resume operations\n", vf); + else +#endif + retval = igb_set_vf_vlan(adapter, msgbuf, vf); + break; + default: + dev_err(pci_dev_to_dev(pdev), "Unhandled Msg %08x\n", msgbuf[0]); + retval = -E1000_ERR_MBX; + break; + } + + /* notify the VF of the results of what it sent us */ + if (retval) + msgbuf[0] |= E1000_VT_MSGTYPE_NACK; + else + msgbuf[0] |= E1000_VT_MSGTYPE_ACK; + + msgbuf[0] |= E1000_VT_MSGTYPE_CTS; + + e1000_write_mbx(hw, msgbuf, 1, vf); +} + +static void igb_msg_task(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 vf; + + for (vf = 0; vf < adapter->vfs_allocated_count; vf++) { + /* process any reset requests */ + if (!e1000_check_for_rst(hw, vf)) + igb_vf_reset_event(adapter, vf); + + /* process any messages pending */ + if (!e1000_check_for_msg(hw, vf)) + igb_rcv_msg_from_vf(adapter, vf); + + /* process any acks */ + if (!e1000_check_for_ack(hw, vf)) + igb_rcv_ack_from_vf(adapter, vf); + } +} + +/** + * igb_set_uta - Set unicast filter table address + * @adapter: board private structure + * + * The unicast table address is a register array of 32-bit registers. + * The table is meant to be used in a way similar to how the MTA is used + * however due to certain limitations in the hardware it is necessary to + * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous + * enable bit to allow vlan tag stripping when promiscuous mode is enabled + **/ +static void igb_set_uta(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + + /* The UTA table only exists on 82576 hardware and newer */ + if (hw->mac.type < e1000_82576) + return; + + /* we only need to do this if VMDq is enabled */ + if (!adapter->vmdq_pools) + return; + + for (i = 0; i < hw->mac.uta_reg_count; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_UTA, i, ~0); +} + +/** + * igb_intr_msi - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ +static irqreturn_t igb_intr_msi(int irq, void *data) +{ + struct igb_adapter *adapter = data; + struct igb_q_vector *q_vector = adapter->q_vector[0]; + struct e1000_hw *hw = &adapter->hw; + /* read ICR disables interrupts using IAM */ + u32 icr = E1000_READ_REG(hw, E1000_ICR); + + igb_write_itr(q_vector); + + if (icr & E1000_ICR_DRSTA) + schedule_work(&adapter->reset_task); + + if (icr & E1000_ICR_DOUTSYNC) { + /* HW is reporting DMA is out of sync */ + adapter->stats.doosync++; + } + + if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { + hw->mac.get_link_status = 1; + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + +#ifdef HAVE_PTP_1588_CLOCK + if (icr & E1000_ICR_TS) { + u32 tsicr = E1000_READ_REG(hw, E1000_TSICR); + + if (tsicr & E1000_TSICR_TXTS) { + /* acknowledge the interrupt */ + E1000_WRITE_REG(hw, E1000_TSICR, E1000_TSICR_TXTS); + /* retrieve hardware timestamp */ + schedule_work(&adapter->ptp_tx_work); + } + } +#endif /* HAVE_PTP_1588_CLOCK */ + + napi_schedule(&q_vector->napi); + + return IRQ_HANDLED; +} + +/** + * igb_intr - Legacy Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ +static irqreturn_t igb_intr(int irq, void *data) +{ + struct igb_adapter *adapter = data; + struct igb_q_vector *q_vector = adapter->q_vector[0]; + struct e1000_hw *hw = &adapter->hw; + /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No + * need for the IMC write */ + u32 icr = E1000_READ_REG(hw, E1000_ICR); + + /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is + * not set, then the adapter didn't send an interrupt */ + if (!(icr & E1000_ICR_INT_ASSERTED)) + return IRQ_NONE; + + igb_write_itr(q_vector); + + if (icr & E1000_ICR_DRSTA) + schedule_work(&adapter->reset_task); + + if (icr & E1000_ICR_DOUTSYNC) { + /* HW is reporting DMA is out of sync */ + adapter->stats.doosync++; + } + + if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { + hw->mac.get_link_status = 1; + /* guard against interrupt when we're going down */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + +#ifdef HAVE_PTP_1588_CLOCK + if (icr & E1000_ICR_TS) { + u32 tsicr = E1000_READ_REG(hw, E1000_TSICR); + + if (tsicr & E1000_TSICR_TXTS) { + /* acknowledge the interrupt */ + E1000_WRITE_REG(hw, E1000_TSICR, E1000_TSICR_TXTS); + /* retrieve hardware timestamp */ + schedule_work(&adapter->ptp_tx_work); + } + } +#endif /* HAVE_PTP_1588_CLOCK */ + + napi_schedule(&q_vector->napi); + + return IRQ_HANDLED; +} + +void igb_ring_irq_enable(struct igb_q_vector *q_vector) +{ + struct igb_adapter *adapter = q_vector->adapter; + struct e1000_hw *hw = &adapter->hw; + + if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) || + (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) { + if ((adapter->num_q_vectors == 1) && !adapter->vf_data) + igb_set_itr(q_vector); + else + igb_update_ring_itr(q_vector); + } + + if (!test_bit(__IGB_DOWN, &adapter->state)) { + if (adapter->msix_entries) + E1000_WRITE_REG(hw, E1000_EIMS, q_vector->eims_value); + else + igb_irq_enable(adapter); + } +} + +/** + * igb_poll - NAPI Rx polling callback + * @napi: napi polling structure + * @budget: count of how many packets we should handle + **/ +static int igb_poll(struct napi_struct *napi, int budget) +{ + struct igb_q_vector *q_vector = container_of(napi, struct igb_q_vector, napi); + bool clean_complete = true; + +#ifdef IGB_DCA + if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED) + igb_update_dca(q_vector); +#endif + if (q_vector->tx.ring) + clean_complete = igb_clean_tx_irq(q_vector); + + if (q_vector->rx.ring) + clean_complete &= igb_clean_rx_irq(q_vector, budget); + +#ifndef HAVE_NETDEV_NAPI_LIST + /* if netdev is disabled we need to stop polling */ + if (!netif_running(q_vector->adapter->netdev)) + clean_complete = true; + +#endif + /* If all work not completed, return budget and keep polling */ + if (!clean_complete) + return budget; + + /* If not enough Rx work done, exit the polling mode */ + napi_complete(napi); + igb_ring_irq_enable(q_vector); + + return 0; +} + +/** + * igb_clean_tx_irq - Reclaim resources after transmit completes + * @q_vector: pointer to q_vector containing needed info + * returns TRUE if ring is completely cleaned + **/ +static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) +{ + struct igb_adapter *adapter = q_vector->adapter; + struct igb_ring *tx_ring = q_vector->tx.ring; + struct igb_tx_buffer *tx_buffer; + union e1000_adv_tx_desc *tx_desc; + unsigned int total_bytes = 0, total_packets = 0; + unsigned int budget = q_vector->tx.work_limit; + unsigned int i = tx_ring->next_to_clean; + + if (test_bit(__IGB_DOWN, &adapter->state)) + return true; + + tx_buffer = &tx_ring->tx_buffer_info[i]; + tx_desc = IGB_TX_DESC(tx_ring, i); + i -= tx_ring->count; + + do { + union e1000_adv_tx_desc *eop_desc = tx_buffer->next_to_watch; + + /* if next_to_watch is not set then there is no work pending */ + if (!eop_desc) + break; + + /* prevent any other reads prior to eop_desc */ + read_barrier_depends(); + + /* if DD is not set pending work has not been completed */ + if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD))) + break; + + /* clear next_to_watch to prevent false hangs */ + tx_buffer->next_to_watch = NULL; + + /* update the statistics for this packet */ + total_bytes += tx_buffer->bytecount; + total_packets += tx_buffer->gso_segs; + + /* free the skb */ + dev_kfree_skb_any(tx_buffer->skb); + + /* unmap skb header data */ + dma_unmap_single(tx_ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + + /* clear tx_buffer data */ + tx_buffer->skb = NULL; + dma_unmap_len_set(tx_buffer, len, 0); + + /* clear last DMA location and unmap remaining buffers */ + while (tx_desc != eop_desc) { + tx_buffer++; + tx_desc++; + i++; + if (unlikely(!i)) { + i -= tx_ring->count; + tx_buffer = tx_ring->tx_buffer_info; + tx_desc = IGB_TX_DESC(tx_ring, 0); + } + + /* unmap any remaining paged data */ + if (dma_unmap_len(tx_buffer, len)) { + dma_unmap_page(tx_ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + dma_unmap_len_set(tx_buffer, len, 0); + } + } + + /* move us one more past the eop_desc for start of next pkt */ + tx_buffer++; + tx_desc++; + i++; + if (unlikely(!i)) { + i -= tx_ring->count; + tx_buffer = tx_ring->tx_buffer_info; + tx_desc = IGB_TX_DESC(tx_ring, 0); + } + + /* issue prefetch for next Tx descriptor */ + prefetch(tx_desc); + + /* update budget accounting */ + budget--; + } while (likely(budget)); + + netdev_tx_completed_queue(txring_txq(tx_ring), + total_packets, total_bytes); + + i += tx_ring->count; + tx_ring->next_to_clean = i; + tx_ring->tx_stats.bytes += total_bytes; + tx_ring->tx_stats.packets += total_packets; + q_vector->tx.total_bytes += total_bytes; + q_vector->tx.total_packets += total_packets; + +#ifdef DEBUG + if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags) && + !(adapter->disable_hw_reset && adapter->tx_hang_detected)) { +#else + if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags)) { +#endif + struct e1000_hw *hw = &adapter->hw; + + /* Detect a transmit hang in hardware, this serializes the + * check with the clearing of time_stamp and movement of i */ + clear_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags); + if (tx_buffer->next_to_watch && + time_after(jiffies, tx_buffer->time_stamp + + (adapter->tx_timeout_factor * HZ)) + && !(E1000_READ_REG(hw, E1000_STATUS) & + E1000_STATUS_TXOFF)) { + + /* detected Tx unit hang */ +#ifdef DEBUG + adapter->tx_hang_detected = TRUE; + if (adapter->disable_hw_reset) { + DPRINTK(DRV, WARNING, + "Deactivating netdev watchdog timer\n"); + if (del_timer(&netdev_ring(tx_ring)->watchdog_timer)) + dev_put(netdev_ring(tx_ring)); +#ifndef HAVE_NET_DEVICE_OPS + netdev_ring(tx_ring)->tx_timeout = NULL; +#endif + } +#endif /* DEBUG */ + dev_err(tx_ring->dev, + "Detected Tx Unit Hang\n" + " Tx Queue <%d>\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "buffer_info[next_to_clean]\n" + " time_stamp <%lx>\n" + " next_to_watch <%p>\n" + " jiffies <%lx>\n" + " desc.status <%x>\n", + tx_ring->queue_index, + E1000_READ_REG(hw, E1000_TDH(tx_ring->reg_idx)), + readl(tx_ring->tail), + tx_ring->next_to_use, + tx_ring->next_to_clean, + tx_buffer->time_stamp, + tx_buffer->next_to_watch, + jiffies, + tx_buffer->next_to_watch->wb.status); + if (netif_is_multiqueue(netdev_ring(tx_ring))) + netif_stop_subqueue(netdev_ring(tx_ring), + ring_queue_index(tx_ring)); + else + netif_stop_queue(netdev_ring(tx_ring)); + + /* we are about to reset, no point in enabling stuff */ + return true; + } + } + +#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) + if (unlikely(total_packets && + netif_carrier_ok(netdev_ring(tx_ring)) && + igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) { + /* Make sure that anybody stopping the queue after this + * sees the new next_to_clean. + */ + smp_mb(); + if (netif_is_multiqueue(netdev_ring(tx_ring))) { + if (__netif_subqueue_stopped(netdev_ring(tx_ring), + ring_queue_index(tx_ring)) && + !(test_bit(__IGB_DOWN, &adapter->state))) { + netif_wake_subqueue(netdev_ring(tx_ring), + ring_queue_index(tx_ring)); + tx_ring->tx_stats.restart_queue++; + } + } else { + if (netif_queue_stopped(netdev_ring(tx_ring)) && + !(test_bit(__IGB_DOWN, &adapter->state))) { + netif_wake_queue(netdev_ring(tx_ring)); + tx_ring->tx_stats.restart_queue++; + } + } + } + + return !!budget; +} + +#ifdef HAVE_VLAN_RX_REGISTER +/** + * igb_receive_skb - helper function to handle rx indications + * @q_vector: structure containing interrupt and ring information + * @skb: packet to send up + **/ +static void igb_receive_skb(struct igb_q_vector *q_vector, + struct sk_buff *skb) +{ + struct vlan_group **vlgrp = netdev_priv(skb->dev); + + if (IGB_CB(skb)->vid) { + if (*vlgrp) { + vlan_gro_receive(&q_vector->napi, *vlgrp, + IGB_CB(skb)->vid, skb); + } else { + dev_kfree_skb_any(skb); + } + } else { + napi_gro_receive(&q_vector->napi, skb); + } +} + +#endif /* HAVE_VLAN_RX_REGISTER */ +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT +/** + * igb_reuse_rx_page - page flip buffer and store it back on the ring + * @rx_ring: rx descriptor ring to store buffers on + * @old_buff: donor buffer to have page reused + * + * Synchronizes page for reuse by the adapter + **/ +static void igb_reuse_rx_page(struct igb_ring *rx_ring, + struct igb_rx_buffer *old_buff) +{ + struct igb_rx_buffer *new_buff; + u16 nta = rx_ring->next_to_alloc; + + new_buff = &rx_ring->rx_buffer_info[nta]; + + /* update, and store next to alloc */ + nta++; + rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0; + + /* transfer page from old buffer to new buffer */ + memcpy(new_buff, old_buff, sizeof(struct igb_rx_buffer)); + + /* sync the buffer for use by the device */ + dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma, + old_buff->page_offset, + IGB_RX_BUFSZ, + DMA_FROM_DEVICE); +} + +static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer, + struct page *page, + unsigned int truesize) +{ + /* avoid re-using remote pages */ + if (unlikely(page_to_nid(page) != numa_node_id())) + return false; + +#if (PAGE_SIZE < 8192) + /* if we are only owner of page we can reuse it */ + if (unlikely(page_count(page) != 1)) + return false; + + /* flip page offset to other buffer */ + rx_buffer->page_offset ^= IGB_RX_BUFSZ; + +#else + /* move offset up to the next cache line */ + rx_buffer->page_offset += truesize; + + if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ)) + return false; +#endif + + /* bump ref count on page before it is given to the stack */ + get_page(page); + + return true; +} + +/** + * igb_add_rx_frag - Add contents of Rx buffer to sk_buff + * @rx_ring: rx descriptor ring to transact packets on + * @rx_buffer: buffer containing page to add + * @rx_desc: descriptor containing length of buffer written by hardware + * @skb: sk_buff to place the data into + * + * This function will add the data contained in rx_buffer->page to the skb. + * This is done either through a direct copy if the data in the buffer is + * less than the skb header size, otherwise it will just attach the page as + * a frag to the skb. + * + * The function will then update the page offset if necessary and return + * true if the buffer can be reused by the adapter. + **/ +static bool igb_add_rx_frag(struct igb_ring *rx_ring, + struct igb_rx_buffer *rx_buffer, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct page *page = rx_buffer->page; + unsigned int size = le16_to_cpu(rx_desc->wb.upper.length); +#if (PAGE_SIZE < 8192) + unsigned int truesize = IGB_RX_BUFSZ; +#else + unsigned int truesize = ALIGN(size, L1_CACHE_BYTES); +#endif + + if ((size <= IGB_RX_HDR_LEN) && !skb_is_nonlinear(skb)) { + unsigned char *va = page_address(page) + rx_buffer->page_offset; + +#ifdef HAVE_PTP_1588_CLOCK + if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { + igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb); + va += IGB_TS_HDR_LEN; + size -= IGB_TS_HDR_LEN; + } +#endif /* HAVE_PTP_1588_CLOCK */ + + memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long))); + + /* we can reuse buffer as-is, just make sure it is local */ + if (likely(page_to_nid(page) == numa_node_id())) + return true; + + /* this page cannot be reused so discard it */ + put_page(page); + return false; + } + + skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, + rx_buffer->page_offset, size, truesize); + + return igb_can_reuse_rx_page(rx_buffer, page, truesize); +} + +static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct igb_rx_buffer *rx_buffer; + struct page *page; + + rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; + + page = rx_buffer->page; + prefetchw(page); + + if (likely(!skb)) { + void *page_addr = page_address(page) + + rx_buffer->page_offset; + + /* prefetch first cache line of first page */ + prefetch(page_addr); +#if L1_CACHE_BYTES < 128 + prefetch(page_addr + L1_CACHE_BYTES); +#endif + + /* allocate a skb to store the frags */ + skb = netdev_alloc_skb_ip_align(rx_ring->netdev, + IGB_RX_HDR_LEN); + if (unlikely(!skb)) { + rx_ring->rx_stats.alloc_failed++; + return NULL; + } + + /* + * we will be copying header into skb->data in + * pskb_may_pull so it is in our interest to prefetch + * it now to avoid a possible cache miss + */ + prefetchw(skb->data); + } + + /* we are reusing so sync this buffer for CPU use */ + dma_sync_single_range_for_cpu(rx_ring->dev, + rx_buffer->dma, + rx_buffer->page_offset, + IGB_RX_BUFSZ, + DMA_FROM_DEVICE); + + /* pull page into skb */ + if (igb_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) { + /* hand second half of page back to the ring */ + igb_reuse_rx_page(rx_ring, rx_buffer); + } else { + /* we are not reusing the buffer so unmap it */ + dma_unmap_page(rx_ring->dev, rx_buffer->dma, + PAGE_SIZE, DMA_FROM_DEVICE); + } + + /* clear contents of rx_buffer */ + rx_buffer->page = NULL; + + return skb; +} + +#endif +static inline void igb_rx_checksum(struct igb_ring *ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + skb_checksum_none_assert(skb); + + /* Ignore Checksum bit is set */ + if (igb_test_staterr(rx_desc, E1000_RXD_STAT_IXSM)) + return; + + /* Rx checksum disabled via ethtool */ + if (!(netdev_ring(ring)->features & NETIF_F_RXCSUM)) + return; + + /* TCP/UDP checksum error bit is set */ + if (igb_test_staterr(rx_desc, + E1000_RXDEXT_STATERR_TCPE | + E1000_RXDEXT_STATERR_IPE)) { + /* + * work around errata with sctp packets where the TCPE aka + * L4E bit is set incorrectly on 64 byte (60 byte w/o crc) + * packets, (aka let the stack check the crc32c) + */ + if (!((skb->len == 60) && + test_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags))) + ring->rx_stats.csum_err++; + + /* let the stack verify checksum errors */ + return; + } + /* It must be a TCP or UDP packet with a valid checksum */ + if (igb_test_staterr(rx_desc, E1000_RXD_STAT_TCPCS | + E1000_RXD_STAT_UDPCS)) + skb->ip_summed = CHECKSUM_UNNECESSARY; +} + +#ifdef NETIF_F_RXHASH +static inline void igb_rx_hash(struct igb_ring *ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + if (netdev_ring(ring)->features & NETIF_F_RXHASH) + skb_set_hash(skb, le32_to_cpu(rx_desc->wb.lower.hi_dword.rss), + PKT_HASH_TYPE_L3); +} + +#endif +#ifndef IGB_NO_LRO +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT +/** + * igb_merge_active_tail - merge active tail into lro skb + * @tail: pointer to active tail in frag_list + * + * This function merges the length and data of an active tail into the + * skb containing the frag_list. It resets the tail's pointer to the head, + * but it leaves the heads pointer to tail intact. + **/ +static inline struct sk_buff *igb_merge_active_tail(struct sk_buff *tail) +{ + struct sk_buff *head = IGB_CB(tail)->head; + + if (!head) + return tail; + + head->len += tail->len; + head->data_len += tail->len; + head->truesize += tail->len; + + IGB_CB(tail)->head = NULL; + + return head; +} + +/** + * igb_add_active_tail - adds an active tail into the skb frag_list + * @head: pointer to the start of the skb + * @tail: pointer to active tail to add to frag_list + * + * This function adds an active tail to the end of the frag list. This tail + * will still be receiving data so we cannot yet ad it's stats to the main + * skb. That is done via igb_merge_active_tail. + **/ +static inline void igb_add_active_tail(struct sk_buff *head, struct sk_buff *tail) +{ + struct sk_buff *old_tail = IGB_CB(head)->tail; + + if (old_tail) { + igb_merge_active_tail(old_tail); + old_tail->next = tail; + } else { + skb_shinfo(head)->frag_list = tail; + } + + IGB_CB(tail)->head = head; + IGB_CB(head)->tail = tail; + + IGB_CB(head)->append_cnt++; +} + +/** + * igb_close_active_frag_list - cleanup pointers on a frag_list skb + * @head: pointer to head of an active frag list + * + * This function will clear the frag_tail_tracker pointer on an active + * frag_list and returns true if the pointer was actually set + **/ +static inline bool igb_close_active_frag_list(struct sk_buff *head) +{ + struct sk_buff *tail = IGB_CB(head)->tail; + + if (!tail) + return false; + + igb_merge_active_tail(tail); + + IGB_CB(head)->tail = NULL; + + return true; +} + +#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ +/** + * igb_can_lro - returns true if packet is TCP/IPV4 and LRO is enabled + * @adapter: board private structure + * @rx_desc: pointer to the rx descriptor + * @skb: pointer to the skb to be merged + * + **/ +static inline bool igb_can_lro(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct iphdr *iph = (struct iphdr *)skb->data; + __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; + + /* verify hardware indicates this is IPv4/TCP */ + if((!(pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_TCP)) || + !(pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV4)))) + return false; + + /* .. and LRO is enabled */ + if (!(netdev_ring(rx_ring)->features & NETIF_F_LRO)) + return false; + + /* .. and we are not in promiscuous mode */ + if (netdev_ring(rx_ring)->flags & IFF_PROMISC) + return false; + + /* .. and the header is large enough for us to read IP/TCP fields */ + if (!pskb_may_pull(skb, sizeof(struct igb_lrohdr))) + return false; + + /* .. and there are no VLANs on packet */ + if (skb->protocol != __constant_htons(ETH_P_IP)) + return false; + + /* .. and we are version 4 with no options */ + if (*(u8 *)iph != 0x45) + return false; + + /* .. and the packet is not fragmented */ + if (iph->frag_off & htons(IP_MF | IP_OFFSET)) + return false; + + /* .. and that next header is TCP */ + if (iph->protocol != IPPROTO_TCP) + return false; + + return true; +} + +static inline struct igb_lrohdr *igb_lro_hdr(struct sk_buff *skb) +{ + return (struct igb_lrohdr *)skb->data; +} + +/** + * igb_lro_flush - Indicate packets to upper layer. + * + * Update IP and TCP header part of head skb if more than one + * skb's chained and indicate packets to upper layer. + **/ +static void igb_lro_flush(struct igb_q_vector *q_vector, + struct sk_buff *skb) +{ + struct igb_lro_list *lrolist = &q_vector->lrolist; + + __skb_unlink(skb, &lrolist->active); + + if (IGB_CB(skb)->append_cnt) { + struct igb_lrohdr *lroh = igb_lro_hdr(skb); + +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + /* close any active lro contexts */ + igb_close_active_frag_list(skb); + +#endif + /* incorporate ip header and re-calculate checksum */ + lroh->iph.tot_len = ntohs(skb->len); + lroh->iph.check = 0; + + /* header length is 5 since we know no options exist */ + lroh->iph.check = ip_fast_csum((u8 *)lroh, 5); + + /* clear TCP checksum to indicate we are an LRO frame */ + lroh->th.check = 0; + + /* incorporate latest timestamp into the tcp header */ + if (IGB_CB(skb)->tsecr) { + lroh->ts[2] = IGB_CB(skb)->tsecr; + lroh->ts[1] = htonl(IGB_CB(skb)->tsval); + } +#ifdef NETIF_F_GSO + + skb_shinfo(skb)->gso_size = IGB_CB(skb)->mss; + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; +#endif + } + +#ifdef HAVE_VLAN_RX_REGISTER + igb_receive_skb(q_vector, skb); +#else + napi_gro_receive(&q_vector->napi, skb); +#endif + lrolist->stats.flushed++; +} + +static void igb_lro_flush_all(struct igb_q_vector *q_vector) +{ + struct igb_lro_list *lrolist = &q_vector->lrolist; + struct sk_buff *skb, *tmp; + + skb_queue_reverse_walk_safe(&lrolist->active, skb, tmp) + igb_lro_flush(q_vector, skb); +} + +/* + * igb_lro_header_ok - Main LRO function. + **/ +static void igb_lro_header_ok(struct sk_buff *skb) +{ + struct igb_lrohdr *lroh = igb_lro_hdr(skb); + u16 opt_bytes, data_len; + +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + IGB_CB(skb)->tail = NULL; +#endif + IGB_CB(skb)->tsecr = 0; + IGB_CB(skb)->append_cnt = 0; + IGB_CB(skb)->mss = 0; + + /* ensure that the checksum is valid */ + if (skb->ip_summed != CHECKSUM_UNNECESSARY) + return; + + /* If we see CE codepoint in IP header, packet is not mergeable */ + if (INET_ECN_is_ce(ipv4_get_dsfield(&lroh->iph))) + return; + + /* ensure no bits set besides ack or psh */ + if (lroh->th.fin || lroh->th.syn || lroh->th.rst || + lroh->th.urg || lroh->th.ece || lroh->th.cwr || + !lroh->th.ack) + return; + + /* store the total packet length */ + data_len = ntohs(lroh->iph.tot_len); + + /* remove any padding from the end of the skb */ + __pskb_trim(skb, data_len); + + /* remove header length from data length */ + data_len -= sizeof(struct igb_lrohdr); + + /* + * check for timestamps. Since the only option we handle are timestamps, + * we only have to handle the simple case of aligned timestamps + */ + opt_bytes = (lroh->th.doff << 2) - sizeof(struct tcphdr); + if (opt_bytes != 0) { + if ((opt_bytes != TCPOLEN_TSTAMP_ALIGNED) || + !pskb_may_pull(skb, sizeof(struct igb_lrohdr) + + TCPOLEN_TSTAMP_ALIGNED) || + (lroh->ts[0] != htonl((TCPOPT_NOP << 24) | + (TCPOPT_NOP << 16) | + (TCPOPT_TIMESTAMP << 8) | + TCPOLEN_TIMESTAMP)) || + (lroh->ts[2] == 0)) { + return; + } + + IGB_CB(skb)->tsval = ntohl(lroh->ts[1]); + IGB_CB(skb)->tsecr = lroh->ts[2]; + + data_len -= TCPOLEN_TSTAMP_ALIGNED; + } + + /* record data_len as mss for the packet */ + IGB_CB(skb)->mss = data_len; + IGB_CB(skb)->next_seq = ntohl(lroh->th.seq); +} + +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT +static void igb_merge_frags(struct sk_buff *lro_skb, struct sk_buff *new_skb) +{ + struct skb_shared_info *sh_info; + struct skb_shared_info *new_skb_info; + unsigned int data_len; + + sh_info = skb_shinfo(lro_skb); + new_skb_info = skb_shinfo(new_skb); + + /* copy frags into the last skb */ + memcpy(sh_info->frags + sh_info->nr_frags, + new_skb_info->frags, + new_skb_info->nr_frags * sizeof(skb_frag_t)); + + /* copy size data over */ + sh_info->nr_frags += new_skb_info->nr_frags; + data_len = IGB_CB(new_skb)->mss; + lro_skb->len += data_len; + lro_skb->data_len += data_len; + lro_skb->truesize += data_len; + + /* wipe record of data from new_skb */ + new_skb_info->nr_frags = 0; + new_skb->len = new_skb->data_len = 0; + dev_kfree_skb_any(new_skb); +} + +#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ +/** + * igb_lro_receive - if able, queue skb into lro chain + * @q_vector: structure containing interrupt and ring information + * @new_skb: pointer to current skb being checked + * + * Checks whether the skb given is eligible for LRO and if that's + * fine chains it to the existing lro_skb based on flowid. If an LRO for + * the flow doesn't exist create one. + **/ +static void igb_lro_receive(struct igb_q_vector *q_vector, + struct sk_buff *new_skb) +{ + struct sk_buff *lro_skb; + struct igb_lro_list *lrolist = &q_vector->lrolist; + struct igb_lrohdr *lroh = igb_lro_hdr(new_skb); + __be32 saddr = lroh->iph.saddr; + __be32 daddr = lroh->iph.daddr; + __be32 tcp_ports = *(__be32 *)&lroh->th; + u16 data_len; +#ifdef HAVE_VLAN_RX_REGISTER + u16 vid = IGB_CB(new_skb)->vid; +#else + u16 vid = new_skb->vlan_tci; +#endif + + igb_lro_header_ok(new_skb); + + /* + * we have a packet that might be eligible for LRO, + * so see if it matches anything we might expect + */ + skb_queue_walk(&lrolist->active, lro_skb) { + if (*(__be32 *)&igb_lro_hdr(lro_skb)->th != tcp_ports || + igb_lro_hdr(lro_skb)->iph.saddr != saddr || + igb_lro_hdr(lro_skb)->iph.daddr != daddr) + continue; + +#ifdef HAVE_VLAN_RX_REGISTER + if (IGB_CB(lro_skb)->vid != vid) +#else + if (lro_skb->vlan_tci != vid) +#endif + continue; + + /* out of order packet */ + if (IGB_CB(lro_skb)->next_seq != IGB_CB(new_skb)->next_seq) { + igb_lro_flush(q_vector, lro_skb); + IGB_CB(new_skb)->mss = 0; + break; + } + + /* TCP timestamp options have changed */ + if (!IGB_CB(lro_skb)->tsecr != !IGB_CB(new_skb)->tsecr) { + igb_lro_flush(q_vector, lro_skb); + break; + } + + /* make sure timestamp values are increasing */ + if (IGB_CB(lro_skb)->tsecr && + IGB_CB(lro_skb)->tsval > IGB_CB(new_skb)->tsval) { + igb_lro_flush(q_vector, lro_skb); + IGB_CB(new_skb)->mss = 0; + break; + } + + data_len = IGB_CB(new_skb)->mss; + + /* Check for all of the above below + * malformed header + * no tcp data + * resultant packet would be too large + * new skb is larger than our current mss + * data would remain in header + * we would consume more frags then the sk_buff contains + * ack sequence numbers changed + * window size has changed + */ + if (data_len == 0 || + data_len > IGB_CB(lro_skb)->mss || + data_len > IGB_CB(lro_skb)->free || +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + data_len != new_skb->data_len || + skb_shinfo(new_skb)->nr_frags >= + (MAX_SKB_FRAGS - skb_shinfo(lro_skb)->nr_frags) || +#endif + igb_lro_hdr(lro_skb)->th.ack_seq != lroh->th.ack_seq || + igb_lro_hdr(lro_skb)->th.window != lroh->th.window) { + igb_lro_flush(q_vector, lro_skb); + break; + } + + /* Remove IP and TCP header*/ + skb_pull(new_skb, new_skb->len - data_len); + + /* update timestamp and timestamp echo response */ + IGB_CB(lro_skb)->tsval = IGB_CB(new_skb)->tsval; + IGB_CB(lro_skb)->tsecr = IGB_CB(new_skb)->tsecr; + + /* update sequence and free space */ + IGB_CB(lro_skb)->next_seq += data_len; + IGB_CB(lro_skb)->free -= data_len; + + /* update append_cnt */ + IGB_CB(lro_skb)->append_cnt++; + +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + /* if header is empty pull pages into current skb */ + igb_merge_frags(lro_skb, new_skb); +#else + /* chain this new skb in frag_list */ + igb_add_active_tail(lro_skb, new_skb); +#endif + + if ((data_len < IGB_CB(lro_skb)->mss) || lroh->th.psh || + skb_shinfo(lro_skb)->nr_frags == MAX_SKB_FRAGS) { + igb_lro_hdr(lro_skb)->th.psh |= lroh->th.psh; + igb_lro_flush(q_vector, lro_skb); + } + + lrolist->stats.coal++; + return; + } + + if (IGB_CB(new_skb)->mss && !lroh->th.psh) { + /* if we are at capacity flush the tail */ + if (skb_queue_len(&lrolist->active) >= IGB_LRO_MAX) { + lro_skb = skb_peek_tail(&lrolist->active); + if (lro_skb) + igb_lro_flush(q_vector, lro_skb); + } + + /* update sequence and free space */ + IGB_CB(new_skb)->next_seq += IGB_CB(new_skb)->mss; + IGB_CB(new_skb)->free = 65521 - new_skb->len; + + /* .. and insert at the front of the active list */ + __skb_queue_head(&lrolist->active, new_skb); + + lrolist->stats.coal++; + return; + } + + /* packet not handled by any of the above, pass it to the stack */ +#ifdef HAVE_VLAN_RX_REGISTER + igb_receive_skb(q_vector, new_skb); +#else + napi_gro_receive(&q_vector->napi, new_skb); +#endif +} + +#endif /* IGB_NO_LRO */ +/** + * igb_process_skb_fields - Populate skb header fields from Rx descriptor + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being populated + * + * This function checks the ring, descriptor, and packet information in + * order to populate the hash, checksum, VLAN, timestamp, protocol, and + * other fields within the skb. + **/ +static void igb_process_skb_fields(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct net_device *dev = rx_ring->netdev; + __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; + +#ifdef NETIF_F_RXHASH + igb_rx_hash(rx_ring, rx_desc, skb); + +#endif + igb_rx_checksum(rx_ring, rx_desc, skb); + + /* update packet type stats */ + if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV4)) + rx_ring->rx_stats.ipv4_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV4_EX)) + rx_ring->rx_stats.ipv4e_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV6)) + rx_ring->rx_stats.ipv6_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV6_EX)) + rx_ring->rx_stats.ipv6e_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_TCP)) + rx_ring->rx_stats.tcp_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_UDP)) + rx_ring->rx_stats.udp_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_SCTP)) + rx_ring->rx_stats.sctp_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_NFS)) + rx_ring->rx_stats.nfs_packets++; + +#ifdef HAVE_PTP_1588_CLOCK + igb_ptp_rx_hwtstamp(rx_ring, rx_desc, skb); +#endif /* HAVE_PTP_1588_CLOCK */ + +#ifdef NETIF_F_HW_VLAN_CTAG_RX + if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) && +#else + if ((dev->features & NETIF_F_HW_VLAN_RX) && +#endif + igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) { + u16 vid = 0; + if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) && + test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &rx_ring->flags)) + vid = be16_to_cpu(rx_desc->wb.upper.vlan); + else + vid = le16_to_cpu(rx_desc->wb.upper.vlan); +#ifdef HAVE_VLAN_RX_REGISTER + IGB_CB(skb)->vid = vid; + } else { + IGB_CB(skb)->vid = 0; +#else + +#ifdef HAVE_VLAN_PROTOCOL + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); +#else + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); +#endif + + +#endif + } + + skb_record_rx_queue(skb, rx_ring->queue_index); + + skb->protocol = eth_type_trans(skb, dev); +} + +/** + * igb_is_non_eop - process handling of non-EOP buffers + * @rx_ring: Rx ring being processed + * @rx_desc: Rx descriptor for current buffer + * + * This function updates next to clean. If the buffer is an EOP buffer + * this function exits returning false, otherwise it will place the + * sk_buff in the next buffer to be chained and return true indicating + * that this is in fact a non-EOP buffer. + **/ +static bool igb_is_non_eop(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc) +{ + u32 ntc = rx_ring->next_to_clean + 1; + + /* fetch, update, and store next to clean */ + ntc = (ntc < rx_ring->count) ? ntc : 0; + rx_ring->next_to_clean = ntc; + + prefetch(IGB_RX_DESC(rx_ring, ntc)); + + if (likely(igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP))) + return false; + + return true; +} + +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT +/* igb_clean_rx_irq -- * legacy */ +static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, int budget) +{ + struct igb_ring *rx_ring = q_vector->rx.ring; + unsigned int total_bytes = 0, total_packets = 0; + u16 cleaned_count = igb_desc_unused(rx_ring); + + do { + struct igb_rx_buffer *rx_buffer; + union e1000_adv_rx_desc *rx_desc; + struct sk_buff *skb; + u16 ntc; + + /* return some buffers to hardware, one at a time is too slow */ + if (cleaned_count >= IGB_RX_BUFFER_WRITE) { + igb_alloc_rx_buffers(rx_ring, cleaned_count); + cleaned_count = 0; + } + + ntc = rx_ring->next_to_clean; + rx_desc = IGB_RX_DESC(rx_ring, ntc); + rx_buffer = &rx_ring->rx_buffer_info[ntc]; + + if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) + break; + + /* + * This memory barrier is needed to keep us from reading + * any other fields out of the rx_desc until we know the + * RXD_STAT_DD bit is set + */ + rmb(); + + skb = rx_buffer->skb; + + prefetch(skb->data); + + /* pull the header of the skb in */ + __skb_put(skb, le16_to_cpu(rx_desc->wb.upper.length)); + + /* clear skb reference in buffer info structure */ + rx_buffer->skb = NULL; + + cleaned_count++; + + BUG_ON(igb_is_non_eop(rx_ring, rx_desc)); + + dma_unmap_single(rx_ring->dev, rx_buffer->dma, + rx_ring->rx_buffer_len, + DMA_FROM_DEVICE); + rx_buffer->dma = 0; + + if (igb_test_staterr(rx_desc, + E1000_RXDEXT_ERR_FRAME_ERR_MASK)) { + dev_kfree_skb_any(skb); + continue; + } + + total_bytes += skb->len; + + /* populate checksum, timestamp, VLAN, and protocol */ + igb_process_skb_fields(rx_ring, rx_desc, skb); + +#ifndef IGB_NO_LRO + if (igb_can_lro(rx_ring, rx_desc, skb)) + igb_lro_receive(q_vector, skb); + else +#endif +#ifdef HAVE_VLAN_RX_REGISTER + igb_receive_skb(q_vector, skb); +#else + napi_gro_receive(&q_vector->napi, skb); +#endif + +#ifndef NETIF_F_GRO + netdev_ring(rx_ring)->last_rx = jiffies; + +#endif + /* update budget accounting */ + total_packets++; + } while (likely(total_packets < budget)); + + rx_ring->rx_stats.packets += total_packets; + rx_ring->rx_stats.bytes += total_bytes; + q_vector->rx.total_packets += total_packets; + q_vector->rx.total_bytes += total_bytes; + + if (cleaned_count) + igb_alloc_rx_buffers(rx_ring, cleaned_count); + +#ifndef IGB_NO_LRO + igb_lro_flush_all(q_vector); + +#endif /* IGB_NO_LRO */ + return total_packets < budget; +} +#else /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ +/** + * igb_get_headlen - determine size of header for LRO/GRO + * @data: pointer to the start of the headers + * @max_len: total length of section to find headers in + * + * This function is meant to determine the length of headers that will + * be recognized by hardware for LRO, and GRO offloads. The main + * motivation of doing this is to only perform one pull for IPv4 TCP + * packets so that we can do basic things like calculating the gso_size + * based on the average data per packet. + **/ +static unsigned int igb_get_headlen(unsigned char *data, + unsigned int max_len) +{ + union { + unsigned char *network; + /* l2 headers */ + struct ethhdr *eth; + struct vlan_hdr *vlan; + /* l3 headers */ + struct iphdr *ipv4; + struct ipv6hdr *ipv6; + } hdr; + __be16 protocol; + u8 nexthdr = 0; /* default to not TCP */ + u8 hlen; + + /* this should never happen, but better safe than sorry */ + if (max_len < ETH_HLEN) + return max_len; + + /* initialize network frame pointer */ + hdr.network = data; + + /* set first protocol and move network header forward */ + protocol = hdr.eth->h_proto; + hdr.network += ETH_HLEN; + + /* handle any vlan tag if present */ + if (protocol == __constant_htons(ETH_P_8021Q)) { + if ((hdr.network - data) > (max_len - VLAN_HLEN)) + return max_len; + + protocol = hdr.vlan->h_vlan_encapsulated_proto; + hdr.network += VLAN_HLEN; + } + + /* handle L3 protocols */ + if (protocol == __constant_htons(ETH_P_IP)) { + if ((hdr.network - data) > (max_len - sizeof(struct iphdr))) + return max_len; + + /* access ihl as a u8 to avoid unaligned access on ia64 */ + hlen = (hdr.network[0] & 0x0F) << 2; + + /* verify hlen meets minimum size requirements */ + if (hlen < sizeof(struct iphdr)) + return hdr.network - data; + + /* record next protocol if header is present */ + if (!(hdr.ipv4->frag_off & htons(IP_OFFSET))) + nexthdr = hdr.ipv4->protocol; +#ifdef NETIF_F_TSO6 + } else if (protocol == __constant_htons(ETH_P_IPV6)) { + if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr))) + return max_len; + + /* record next protocol */ + nexthdr = hdr.ipv6->nexthdr; + hlen = sizeof(struct ipv6hdr); +#endif /* NETIF_F_TSO6 */ + } else { + return hdr.network - data; + } + + /* relocate pointer to start of L4 header */ + hdr.network += hlen; + + /* finally sort out TCP */ + if (nexthdr == IPPROTO_TCP) { + if ((hdr.network - data) > (max_len - sizeof(struct tcphdr))) + return max_len; + + /* access doff as a u8 to avoid unaligned access on ia64 */ + hlen = (hdr.network[12] & 0xF0) >> 2; + + /* verify hlen meets minimum size requirements */ + if (hlen < sizeof(struct tcphdr)) + return hdr.network - data; + + hdr.network += hlen; + } else if (nexthdr == IPPROTO_UDP) { + if ((hdr.network - data) > (max_len - sizeof(struct udphdr))) + return max_len; + + hdr.network += sizeof(struct udphdr); + } + + /* + * If everything has gone correctly hdr.network should be the + * data section of the packet and will be the end of the header. + * If not then it probably represents the end of the last recognized + * header. + */ + if ((hdr.network - data) < max_len) + return hdr.network - data; + else + return max_len; +} + +/** + * igb_pull_tail - igb specific version of skb_pull_tail + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being adjusted + * + * This function is an igb specific version of __pskb_pull_tail. The + * main difference between this version and the original function is that + * this function can make several assumptions about the state of things + * that allow for significant optimizations versus the standard function. + * As a result we can do things like drop a frag and maintain an accurate + * truesize for the skb. + */ +static void igb_pull_tail(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; + unsigned char *va; + unsigned int pull_len; + + /* + * it is valid to use page_address instead of kmap since we are + * working with pages allocated out of the lomem pool per + * alloc_page(GFP_ATOMIC) + */ + va = skb_frag_address(frag); + +#ifdef HAVE_PTP_1588_CLOCK + if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { + /* retrieve timestamp from buffer */ + igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb); + + /* update pointers to remove timestamp header */ + skb_frag_size_sub(frag, IGB_TS_HDR_LEN); + frag->page_offset += IGB_TS_HDR_LEN; + skb->data_len -= IGB_TS_HDR_LEN; + skb->len -= IGB_TS_HDR_LEN; + + /* move va to start of packet data */ + va += IGB_TS_HDR_LEN; + } +#endif /* HAVE_PTP_1588_CLOCK */ + + /* + * we need the header to contain the greater of either ETH_HLEN or + * 60 bytes if the skb->len is less than 60 for skb_pad. + */ + pull_len = igb_get_headlen(va, IGB_RX_HDR_LEN); + + /* align pull length to size of long to optimize memcpy performance */ + skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long))); + + /* update all of the pointers */ + skb_frag_size_sub(frag, pull_len); + frag->page_offset += pull_len; + skb->data_len -= pull_len; + skb->tail += pull_len; +} + +/** + * igb_cleanup_headers - Correct corrupted or empty headers + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being fixed + * + * Address the case where we are pulling data in on pages only + * and as such no data is present in the skb header. + * + * In addition if skb is not at least 60 bytes we need to pad it so that + * it is large enough to qualify as a valid Ethernet frame. + * + * Returns true if an error was encountered and skb was freed. + **/ +static bool igb_cleanup_headers(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + + if (unlikely((igb_test_staterr(rx_desc, + E1000_RXDEXT_ERR_FRAME_ERR_MASK)))) { + struct net_device *netdev = rx_ring->netdev; + if (!(netdev->features & NETIF_F_RXALL)) { + dev_kfree_skb_any(skb); + return true; + } + } + + /* place header in linear portion of buffer */ + if (skb_is_nonlinear(skb)) + igb_pull_tail(rx_ring, rx_desc, skb); + + /* if skb_pad returns an error the skb was freed */ + if (unlikely(skb->len < 60)) { + int pad_len = 60 - skb->len; + + if (skb_pad(skb, pad_len)) + return true; + __skb_put(skb, pad_len); + } + + return false; +} + +/* igb_clean_rx_irq -- * packet split */ +static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, int budget) +{ + struct igb_ring *rx_ring = q_vector->rx.ring; + struct sk_buff *skb = rx_ring->skb; + unsigned int total_bytes = 0, total_packets = 0; + u16 cleaned_count = igb_desc_unused(rx_ring); + + do { + union e1000_adv_rx_desc *rx_desc; + + /* return some buffers to hardware, one at a time is too slow */ + if (cleaned_count >= IGB_RX_BUFFER_WRITE) { + igb_alloc_rx_buffers(rx_ring, cleaned_count); + cleaned_count = 0; + } + + rx_desc = IGB_RX_DESC(rx_ring, rx_ring->next_to_clean); + + if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) + break; + + /* + * This memory barrier is needed to keep us from reading + * any other fields out of the rx_desc until we know the + * RXD_STAT_DD bit is set + */ + rmb(); + + /* retrieve a buffer from the ring */ + skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb); + + /* exit if we failed to retrieve a buffer */ + if (!skb) + break; + + cleaned_count++; + + /* fetch next buffer in frame if non-eop */ + if (igb_is_non_eop(rx_ring, rx_desc)) + continue; + + /* verify the packet layout is correct */ + if (igb_cleanup_headers(rx_ring, rx_desc, skb)) { + skb = NULL; + continue; + } + + /* probably a little skewed due to removing CRC */ + total_bytes += skb->len; + + /* populate checksum, timestamp, VLAN, and protocol */ + igb_process_skb_fields(rx_ring, rx_desc, skb); + +#ifndef IGB_NO_LRO + if (igb_can_lro(rx_ring, rx_desc, skb)) + igb_lro_receive(q_vector, skb); + else +#endif +#ifdef HAVE_VLAN_RX_REGISTER + igb_receive_skb(q_vector, skb); +#else + napi_gro_receive(&q_vector->napi, skb); +#endif +#ifndef NETIF_F_GRO + + netdev_ring(rx_ring)->last_rx = jiffies; +#endif + + /* reset skb pointer */ + skb = NULL; + + /* update budget accounting */ + total_packets++; + } while (likely(total_packets < budget)); + + /* place incomplete frames back on ring for completion */ + rx_ring->skb = skb; + + rx_ring->rx_stats.packets += total_packets; + rx_ring->rx_stats.bytes += total_bytes; + q_vector->rx.total_packets += total_packets; + q_vector->rx.total_bytes += total_bytes; + + if (cleaned_count) + igb_alloc_rx_buffers(rx_ring, cleaned_count); + +#ifndef IGB_NO_LRO + igb_lro_flush_all(q_vector); + +#endif /* IGB_NO_LRO */ + return total_packets < budget; +} +#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ + +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT +static bool igb_alloc_mapped_skb(struct igb_ring *rx_ring, + struct igb_rx_buffer *bi) +{ + struct sk_buff *skb = bi->skb; + dma_addr_t dma = bi->dma; + + if (dma) + return true; + + if (likely(!skb)) { + skb = netdev_alloc_skb_ip_align(netdev_ring(rx_ring), + rx_ring->rx_buffer_len); + bi->skb = skb; + if (!skb) { + rx_ring->rx_stats.alloc_failed++; + return false; + } + + /* initialize skb for ring */ + skb_record_rx_queue(skb, ring_queue_index(rx_ring)); + } + + dma = dma_map_single(rx_ring->dev, skb->data, + rx_ring->rx_buffer_len, DMA_FROM_DEVICE); + + /* if mapping failed free memory back to system since + * there isn't much point in holding memory we can't use + */ + if (dma_mapping_error(rx_ring->dev, dma)) { + dev_kfree_skb_any(skb); + bi->skb = NULL; + + rx_ring->rx_stats.alloc_failed++; + return false; + } + + bi->dma = dma; + return true; +} + +#else /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ +static bool igb_alloc_mapped_page(struct igb_ring *rx_ring, + struct igb_rx_buffer *bi) +{ + struct page *page = bi->page; + dma_addr_t dma; + + /* since we are recycling buffers we should seldom need to alloc */ + if (likely(page)) + return true; + + /* alloc new page for storage */ + page = alloc_page(GFP_ATOMIC | __GFP_COLD); + if (unlikely(!page)) { + rx_ring->rx_stats.alloc_failed++; + return false; + } + + /* map page for use */ + dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE); + + /* + * if mapping failed free memory back to system since + * there isn't much point in holding memory we can't use + */ + if (dma_mapping_error(rx_ring->dev, dma)) { + __free_page(page); + + rx_ring->rx_stats.alloc_failed++; + return false; + } + + bi->dma = dma; + bi->page = page; + bi->page_offset = 0; + + return true; +} + +#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ +/** + * igb_alloc_rx_buffers - Replace used receive buffers; packet split + * @adapter: address of board private structure + **/ +void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count) +{ + union e1000_adv_rx_desc *rx_desc; + struct igb_rx_buffer *bi; + u16 i = rx_ring->next_to_use; + + /* nothing to do */ + if (!cleaned_count) + return; + + rx_desc = IGB_RX_DESC(rx_ring, i); + bi = &rx_ring->rx_buffer_info[i]; + i -= rx_ring->count; + + do { +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + if (!igb_alloc_mapped_skb(rx_ring, bi)) +#else + if (!igb_alloc_mapped_page(rx_ring, bi)) +#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ + break; + + /* + * Refresh the desc even if buffer_addrs didn't change + * because each write-back erases this info. + */ +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + rx_desc->read.pkt_addr = cpu_to_le64(bi->dma); +#else + rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); +#endif + + rx_desc++; + bi++; + i++; + if (unlikely(!i)) { + rx_desc = IGB_RX_DESC(rx_ring, 0); + bi = rx_ring->rx_buffer_info; + i -= rx_ring->count; + } + + /* clear the hdr_addr for the next_to_use descriptor */ + rx_desc->read.hdr_addr = 0; + + cleaned_count--; + } while (cleaned_count); + + i += rx_ring->count; + + if (rx_ring->next_to_use != i) { + /* record the next descriptor to use */ + rx_ring->next_to_use = i; + +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + /* update next to alloc since we have filled the ring */ + rx_ring->next_to_alloc = i; + +#endif + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + writel(i, rx_ring->tail); + } +} + +#ifdef SIOCGMIIPHY +/** + * igb_mii_ioctl - + * @netdev: + * @ifreq: + * @cmd: + **/ +static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct mii_ioctl_data *data = if_mii(ifr); + + if (adapter->hw.phy.media_type != e1000_media_type_copper) + return -EOPNOTSUPP; + + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = adapter->hw.phy.addr; + break; + case SIOCGMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, + &data->val_out)) + return -EIO; + break; + case SIOCSMIIREG: + default: + return -EOPNOTSUPP; + } + return E1000_SUCCESS; +} + +#endif +/** + * igb_ioctl - + * @netdev: + * @ifreq: + * @cmd: + **/ +static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { +#ifdef SIOCGMIIPHY + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + return igb_mii_ioctl(netdev, ifr, cmd); +#endif +#ifdef HAVE_PTP_1588_CLOCK + case SIOCSHWTSTAMP: + return igb_ptp_hwtstamp_ioctl(netdev, ifr, cmd); +#endif /* HAVE_PTP_1588_CLOCK */ +#ifdef ETHTOOL_OPS_COMPAT + case SIOCETHTOOL: + return ethtool_ioctl(ifr); +#endif + default: + return -EOPNOTSUPP; + } +} + +s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + struct igb_adapter *adapter = hw->back; + u16 cap_offset; + + cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); + if (!cap_offset) + return -E1000_ERR_CONFIG; + + pci_read_config_word(adapter->pdev, cap_offset + reg, value); + + return E1000_SUCCESS; +} + +s32 e1000_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + struct igb_adapter *adapter = hw->back; + u16 cap_offset; + + cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); + if (!cap_offset) + return -E1000_ERR_CONFIG; + + pci_write_config_word(adapter->pdev, cap_offset + reg, *value); + + return E1000_SUCCESS; +} + +#ifdef HAVE_VLAN_RX_REGISTER +static void igb_vlan_mode(struct net_device *netdev, struct vlan_group *vlgrp) +#else +void igb_vlan_mode(struct net_device *netdev, u32 features) +#endif +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ctrl, rctl; + int i; +#ifdef HAVE_VLAN_RX_REGISTER + bool enable = !!vlgrp; + + igb_irq_disable(adapter); + + adapter->vlgrp = vlgrp; + + if (!test_bit(__IGB_DOWN, &adapter->state)) + igb_irq_enable(adapter); +#else +#ifdef NETIF_F_HW_VLAN_CTAG_RX + bool enable = !!(features & NETIF_F_HW_VLAN_CTAG_RX); +#else + bool enable = !!(features & NETIF_F_HW_VLAN_RX); +#endif +#endif + + if (enable) { + /* enable VLAN tag insert/strip */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= E1000_CTRL_VME; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Disable CFI check */ + rctl = E1000_READ_REG(hw, E1000_RCTL); + rctl &= ~E1000_RCTL_CFIEN; + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + } else { + /* disable VLAN tag insert/strip */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl &= ~E1000_CTRL_VME; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + } + +#ifndef CONFIG_IGB_VMDQ_NETDEV + for (i = 0; i < adapter->vmdq_pools; i++) { + igb_set_vf_vlan_strip(adapter, + adapter->vfs_allocated_count + i, + enable); + } + +#else + igb_set_vf_vlan_strip(adapter, + adapter->vfs_allocated_count, + enable); + + for (i = 1; i < adapter->vmdq_pools; i++) { +#ifdef HAVE_VLAN_RX_REGISTER + struct igb_vmdq_adapter *vadapter; + vadapter = netdev_priv(adapter->vmdq_netdev[i-1]); + enable = !!vadapter->vlgrp; +#else + struct net_device *vnetdev; + vnetdev = adapter->vmdq_netdev[i-1]; +#ifdef NETIF_F_HW_VLAN_CTAG_RX + enable = !!(vnetdev->features & NETIF_F_HW_VLAN_CTAG_RX); +#else + enable = !!(vnetdev->features & NETIF_F_HW_VLAN_RX); +#endif +#endif + igb_set_vf_vlan_strip(adapter, + adapter->vfs_allocated_count + i, + enable); + } + +#endif + igb_rlpml_set(adapter); +} + +#ifdef HAVE_VLAN_PROTOCOL +static int igb_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid) +#elif defined HAVE_INT_NDO_VLAN_RX_ADD_VID +#ifdef NETIF_F_HW_VLAN_CTAG_RX +static int igb_vlan_rx_add_vid(struct net_device *netdev, + __always_unused __be16 proto, u16 vid) +#else +static int igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +#endif +#else +static void igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +#endif +{ + struct igb_adapter *adapter = netdev_priv(netdev); + int pf_id = adapter->vfs_allocated_count; + + /* attempt to add filter to vlvf array */ + igb_vlvf_set(adapter, vid, TRUE, pf_id); + + /* add the filter since PF can receive vlans w/o entry in vlvf */ + igb_vfta_set(adapter, vid, TRUE); +#ifndef HAVE_NETDEV_VLAN_FEATURES + + /* Copy feature flags from netdev to the vlan netdev for this vid. + * This allows things like TSO to bubble down to our vlan device. + * There is no need to update netdev for vlan 0 (DCB), since it + * wouldn't has v_netdev. + */ + if (adapter->vlgrp) { + struct vlan_group *vlgrp = adapter->vlgrp; + struct net_device *v_netdev = vlan_group_get_device(vlgrp, vid); + if (v_netdev) { + v_netdev->features |= netdev->features; + vlan_group_set_device(vlgrp, vid, v_netdev); + } + } +#endif +#ifndef HAVE_VLAN_RX_REGISTER + + set_bit(vid, adapter->active_vlans); +#endif +#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID + return 0; +#endif +} + +#ifdef HAVE_VLAN_PROTOCOL +static int igb_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid) +#elif defined HAVE_INT_NDO_VLAN_RX_ADD_VID +#ifdef NETIF_F_HW_VLAN_CTAG_RX +static int igb_vlan_rx_kill_vid(struct net_device *netdev, + __always_unused __be16 proto, u16 vid) +#else +static int igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +#endif +#else +static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +#endif +{ + struct igb_adapter *adapter = netdev_priv(netdev); + int pf_id = adapter->vfs_allocated_count; + s32 err; + +#ifdef HAVE_VLAN_RX_REGISTER + igb_irq_disable(adapter); + + vlan_group_set_device(adapter->vlgrp, vid, NULL); + + if (!test_bit(__IGB_DOWN, &adapter->state)) + igb_irq_enable(adapter); + +#endif /* HAVE_VLAN_RX_REGISTER */ + /* remove vlan from VLVF table array */ + err = igb_vlvf_set(adapter, vid, FALSE, pf_id); + + /* if vid was not present in VLVF just remove it from table */ + if (err) + igb_vfta_set(adapter, vid, FALSE); +#ifndef HAVE_VLAN_RX_REGISTER + + clear_bit(vid, adapter->active_vlans); +#endif +#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID + return 0; +#endif +} + +static void igb_restore_vlan(struct igb_adapter *adapter) +{ +#ifdef HAVE_VLAN_RX_REGISTER + igb_vlan_mode(adapter->netdev, adapter->vlgrp); + + if (adapter->vlgrp) { + u16 vid; + for (vid = 0; vid < VLAN_N_VID; vid++) { + if (!vlan_group_get_device(adapter->vlgrp, vid)) + continue; +#ifdef NETIF_F_HW_VLAN_CTAG_RX + igb_vlan_rx_add_vid(adapter->netdev, + htons(ETH_P_8021Q), vid); +#else + igb_vlan_rx_add_vid(adapter->netdev, vid); +#endif + } + } +#else + u16 vid; + + igb_vlan_mode(adapter->netdev, adapter->netdev->features); + + for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) +#ifdef NETIF_F_HW_VLAN_CTAG_RX + igb_vlan_rx_add_vid(adapter->netdev, + htons(ETH_P_8021Q), vid); +#else + igb_vlan_rx_add_vid(adapter->netdev, vid); +#endif +#endif +} + +int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx) +{ + struct pci_dev *pdev = adapter->pdev; + struct e1000_mac_info *mac = &adapter->hw.mac; + + mac->autoneg = 0; + + /* SerDes device's does not support 10Mbps Full/duplex + * and 100Mbps Half duplex + */ + if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) { + switch (spddplx) { + case SPEED_10 + DUPLEX_HALF: + case SPEED_10 + DUPLEX_FULL: + case SPEED_100 + DUPLEX_HALF: + dev_err(pci_dev_to_dev(pdev), + "Unsupported Speed/Duplex configuration\n"); + return -EINVAL; + default: + break; + } + } + + switch (spddplx) { + case SPEED_10 + DUPLEX_HALF: + mac->forced_speed_duplex = ADVERTISE_10_HALF; + break; + case SPEED_10 + DUPLEX_FULL: + mac->forced_speed_duplex = ADVERTISE_10_FULL; + break; + case SPEED_100 + DUPLEX_HALF: + mac->forced_speed_duplex = ADVERTISE_100_HALF; + break; + case SPEED_100 + DUPLEX_FULL: + mac->forced_speed_duplex = ADVERTISE_100_FULL; + break; + case SPEED_1000 + DUPLEX_FULL: + mac->autoneg = 1; + adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL; + break; + case SPEED_1000 + DUPLEX_HALF: /* not supported */ + default: + dev_err(pci_dev_to_dev(pdev), "Unsupported Speed/Duplex configuration\n"); + return -EINVAL; + } + + /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */ + adapter->hw.phy.mdix = AUTO_ALL_MODES; + + return 0; +} + +static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake, + bool runtime) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ctrl, rctl, status; + u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; +#ifdef CONFIG_PM + int retval = 0; +#endif + + netif_device_detach(netdev); + + status = E1000_READ_REG(hw, E1000_STATUS); + if (status & E1000_STATUS_LU) + wufc &= ~E1000_WUFC_LNKC; + + if (netif_running(netdev)) + __igb_close(netdev, true); + + igb_clear_interrupt_scheme(adapter); + +#ifdef CONFIG_PM + retval = pci_save_state(pdev); + if (retval) + return retval; +#endif + + if (wufc) { + igb_setup_rctl(adapter); + igb_set_rx_mode(netdev); + + /* turn on all-multi mode if wake on multicast is enabled */ + if (wufc & E1000_WUFC_MC) { + rctl = E1000_READ_REG(hw, E1000_RCTL); + rctl |= E1000_RCTL_MPE; + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + } + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + /* phy power management enable */ + #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 + ctrl |= E1000_CTRL_ADVD3WUC; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Allow time for pending master requests to run */ + e1000_disable_pcie_master(hw); + + E1000_WRITE_REG(hw, E1000_WUC, E1000_WUC_PME_EN); + E1000_WRITE_REG(hw, E1000_WUFC, wufc); + } else { + E1000_WRITE_REG(hw, E1000_WUC, 0); + E1000_WRITE_REG(hw, E1000_WUFC, 0); + } + + *enable_wake = wufc || adapter->en_mng_pt; + if (!*enable_wake) + igb_power_down_link(adapter); + else + igb_power_up_link(adapter); + + /* Release control of h/w to f/w. If f/w is AMT enabled, this + * would have already happened in close and is redundant. */ + igb_release_hw_control(adapter); + + pci_disable_device(pdev); + + return 0; +} + +#ifdef CONFIG_PM +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS +static int igb_suspend(struct device *dev) +#else +static int igb_suspend(struct pci_dev *pdev, pm_message_t state) +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ +{ +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS + struct pci_dev *pdev = to_pci_dev(dev); +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ + int retval; + bool wake; + + retval = __igb_shutdown(pdev, &wake, 0); + if (retval) + return retval; + + if (wake) { + pci_prepare_to_sleep(pdev); + } else { + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + } + + return 0; +} + +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS +static int igb_resume(struct device *dev) +#else +static int igb_resume(struct pci_dev *pdev) +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ +{ +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS + struct pci_dev *pdev = to_pci_dev(dev); +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_save_state(pdev); + + err = pci_enable_device_mem(pdev); + if (err) { + dev_err(pci_dev_to_dev(pdev), + "igb: Cannot enable PCI device from suspend\n"); + return err; + } + pci_set_master(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + if (igb_init_interrupt_scheme(adapter, true)) { + dev_err(pci_dev_to_dev(pdev), "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + + igb_reset(adapter); + + /* let the f/w know that the h/w is now under the control of the + * driver. */ + igb_get_hw_control(adapter); + + E1000_WRITE_REG(hw, E1000_WUS, ~0); + + if (netdev->flags & IFF_UP) { + rtnl_lock(); + err = __igb_open(netdev, true); + rtnl_unlock(); + if (err) + return err; + } + + netif_device_attach(netdev); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS +static int igb_runtime_idle(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + + if (!igb_has_link(adapter)) + pm_schedule_suspend(dev, MSEC_PER_SEC * 5); + + return -EBUSY; +} + +static int igb_runtime_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int retval; + bool wake; + + retval = __igb_shutdown(pdev, &wake, 1); + if (retval) + return retval; + + if (wake) { + pci_prepare_to_sleep(pdev); + } else { + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + } + + return 0; +} + +static int igb_runtime_resume(struct device *dev) +{ + return igb_resume(dev); +} +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ +#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ + +#ifdef USE_REBOOT_NOTIFIER +/* only want to do this for 2.4 kernels? */ +static int igb_notify_reboot(struct notifier_block *nb, unsigned long event, + void *p) +{ + struct pci_dev *pdev = NULL; + bool wake; + + switch (event) { + case SYS_DOWN: + case SYS_HALT: + case SYS_POWER_OFF: + while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) { + if (pci_dev_driver(pdev) == &igb_driver) { + __igb_shutdown(pdev, &wake, 0); + if (event == SYS_POWER_OFF) { + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); + } + } + } + } + return NOTIFY_DONE; +} +#else +static void igb_shutdown(struct pci_dev *pdev) +{ + bool wake = false; + + __igb_shutdown(pdev, &wake, 0); + + if (system_state == SYSTEM_POWER_OFF) { + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); + } +} +#endif /* USE_REBOOT_NOTIFIER */ + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void igb_netpoll(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct igb_q_vector *q_vector; + int i; + + for (i = 0; i < adapter->num_q_vectors; i++) { + q_vector = adapter->q_vector[i]; + if (adapter->msix_entries) + E1000_WRITE_REG(hw, E1000_EIMC, q_vector->eims_value); + else + igb_irq_disable(adapter); + napi_schedule(&q_vector->napi); + } +} +#endif /* CONFIG_NET_POLL_CONTROLLER */ + +#ifdef HAVE_PCI_ERS +#define E1000_DEV_ID_82576_VF 0x10CA +/** + * igb_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + +#ifdef CONFIG_PCI_IOV__UNUSED + struct pci_dev *bdev, *vfdev; + u32 dw0, dw1, dw2, dw3; + int vf, pos; + u16 req_id, pf_func; + + if (!(adapter->flags & IGB_FLAG_DETECT_BAD_DMA)) + goto skip_bad_vf_detection; + + bdev = pdev->bus->self; + while (bdev && (pci_pcie_type(bdev) != PCI_EXP_TYPE_ROOT_PORT)) + bdev = bdev->bus->self; + + if (!bdev) + goto skip_bad_vf_detection; + + pos = pci_find_ext_capability(bdev, PCI_EXT_CAP_ID_ERR); + if (!pos) + goto skip_bad_vf_detection; + + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG, &dw0); + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 4, &dw1); + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 8, &dw2); + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 12, &dw3); + + req_id = dw1 >> 16; + /* On the 82576 if bit 7 of the requestor ID is set then it's a VF */ + if (!(req_id & 0x0080)) + goto skip_bad_vf_detection; + + pf_func = req_id & 0x01; + if ((pf_func & 1) == (pdev->devfn & 1)) { + + vf = (req_id & 0x7F) >> 1; + dev_err(pci_dev_to_dev(pdev), + "VF %d has caused a PCIe error\n", vf); + dev_err(pci_dev_to_dev(pdev), + "TLP: dw0: %8.8x\tdw1: %8.8x\tdw2: " + "%8.8x\tdw3: %8.8x\n", + dw0, dw1, dw2, dw3); + + /* Find the pci device of the offending VF */ + vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, + E1000_DEV_ID_82576_VF, NULL); + while (vfdev) { + if (vfdev->devfn == (req_id & 0xFF)) + break; + vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, + E1000_DEV_ID_82576_VF, vfdev); + } + /* + * There's a slim chance the VF could have been hot plugged, + * so if it is no longer present we don't need to issue the + * VFLR. Just clean up the AER in that case. + */ + if (vfdev) { + dev_err(pci_dev_to_dev(pdev), + "Issuing VFLR to VF %d\n", vf); + pci_write_config_dword(vfdev, 0xA8, 0x00008000); + } + + pci_cleanup_aer_uncorrect_error_status(pdev); + } + + /* + * Even though the error may have occurred on the other port + * we still need to increment the vf error reference count for + * both ports because the I/O resume function will be called + * for both of them. + */ + adapter->vferr_refcount++; + + return PCI_ERS_RESULT_RECOVERED; + +skip_bad_vf_detection: +#endif /* CONFIG_PCI_IOV */ + + netif_device_detach(netdev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (netif_running(netdev)) + igb_down(adapter); + pci_disable_device(pdev); + + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * igb_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. Implementation + * resembles the first-half of the igb_resume routine. + */ +static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + pci_ers_result_t result; + + if (pci_enable_device_mem(pdev)) { + dev_err(pci_dev_to_dev(pdev), + "Cannot re-enable PCI device after reset.\n"); + result = PCI_ERS_RESULT_DISCONNECT; + } else { + pci_set_master(pdev); + pci_restore_state(pdev); + pci_save_state(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + schedule_work(&adapter->reset_task); + E1000_WRITE_REG(hw, E1000_WUS, ~0); + result = PCI_ERS_RESULT_RECOVERED; + } + + pci_cleanup_aer_uncorrect_error_status(pdev); + + return result; +} + +/** + * igb_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. Implementation resembles the + * second-half of the igb_resume routine. + */ +static void igb_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + + if (adapter->vferr_refcount) { + dev_info(pci_dev_to_dev(pdev), "Resuming after VF err\n"); + adapter->vferr_refcount--; + return; + } + + if (netif_running(netdev)) { + if (igb_up(adapter)) { + dev_err(pci_dev_to_dev(pdev), "igb_up failed after reset\n"); + return; + } + } + + netif_device_attach(netdev); + + /* let the f/w know that the h/w is now under the control of the + * driver. */ + igb_get_hw_control(adapter); +} + +#endif /* HAVE_PCI_ERS */ + +int igb_add_mac_filter(struct igb_adapter *adapter, u8 *addr, u16 queue) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + + if (is_zero_ether_addr(addr)) + return 0; + + for (i = 0; i < hw->mac.rar_entry_count; i++) { + if (adapter->mac_table[i].state & IGB_MAC_STATE_IN_USE) + continue; + adapter->mac_table[i].state = (IGB_MAC_STATE_MODIFIED | + IGB_MAC_STATE_IN_USE); + memcpy(adapter->mac_table[i].addr, addr, ETH_ALEN); + adapter->mac_table[i].queue = queue; + igb_sync_mac_table(adapter); + return 0; + } + return -ENOMEM; +} +int igb_del_mac_filter(struct igb_adapter *adapter, u8* addr, u16 queue) +{ + /* search table for addr, if found, set to 0 and sync */ + int i; + struct e1000_hw *hw = &adapter->hw; + + if (is_zero_ether_addr(addr)) + return 0; + for (i = 0; i < hw->mac.rar_entry_count; i++) { + if (ether_addr_equal(addr, adapter->mac_table[i].addr) && + adapter->mac_table[i].queue == queue) { + adapter->mac_table[i].state = IGB_MAC_STATE_MODIFIED; + memset(adapter->mac_table[i].addr, 0, ETH_ALEN); + adapter->mac_table[i].queue = 0; + igb_sync_mac_table(adapter); + return 0; + } + } + return -ENOMEM; +} +static int igb_set_vf_mac(struct igb_adapter *adapter, + int vf, unsigned char *mac_addr) +{ + igb_del_mac_filter(adapter, adapter->vf_data[vf].vf_mac_addresses, vf); + memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN); + + igb_add_mac_filter(adapter, mac_addr, vf); + + return 0; +} + +#ifdef IFLA_VF_MAX +static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count)) + return -EINVAL; + adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC; + dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf); + dev_info(&adapter->pdev->dev, "Reload the VF driver to make this" + " change effective.\n"); + if (test_bit(__IGB_DOWN, &adapter->state)) { + dev_warn(&adapter->pdev->dev, "The VF MAC address has been set," + " but the PF device is not up.\n"); + dev_warn(&adapter->pdev->dev, "Bring the PF device up before" + " attempting to use the VF device.\n"); + } + return igb_set_vf_mac(adapter, vf, mac); +} + +static int igb_link_mbps(int internal_link_speed) +{ + switch (internal_link_speed) { + case SPEED_100: + return 100; + case SPEED_1000: + return 1000; + case SPEED_2500: + return 2500; + default: + return 0; + } +} + +static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate, + int link_speed) +{ + int rf_dec, rf_int; + u32 bcnrc_val; + + if (tx_rate != 0) { + /* Calculate the rate factor values to set */ + rf_int = link_speed / tx_rate; + rf_dec = (link_speed - (rf_int * tx_rate)); + rf_dec = (rf_dec * (1<<E1000_RTTBCNRC_RF_INT_SHIFT)) / tx_rate; + + bcnrc_val = E1000_RTTBCNRC_RS_ENA; + bcnrc_val |= ((rf_int<<E1000_RTTBCNRC_RF_INT_SHIFT) & + E1000_RTTBCNRC_RF_INT_MASK); + bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK); + } else { + bcnrc_val = 0; + } + + E1000_WRITE_REG(hw, E1000_RTTDQSEL, vf); /* vf X uses queue X */ + /* + * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM + * register. MMW_SIZE=0x014 if 9728-byte jumbo is supported. + */ + E1000_WRITE_REG(hw, E1000_RTTBCNRM(0), 0x14); + E1000_WRITE_REG(hw, E1000_RTTBCNRC, bcnrc_val); +} + +static void igb_check_vf_rate_limit(struct igb_adapter *adapter) +{ + int actual_link_speed, i; + bool reset_rate = false; + + /* VF TX rate limit was not set */ + if ((adapter->vf_rate_link_speed == 0) || + (adapter->hw.mac.type != e1000_82576)) + return; + + actual_link_speed = igb_link_mbps(adapter->link_speed); + if (actual_link_speed != adapter->vf_rate_link_speed) { + reset_rate = true; + adapter->vf_rate_link_speed = 0; + dev_info(&adapter->pdev->dev, + "Link speed has been changed. VF Transmit rate is disabled\n"); + } + + for (i = 0; i < adapter->vfs_allocated_count; i++) { + if (reset_rate) + adapter->vf_data[i].tx_rate = 0; + + igb_set_vf_rate_limit(&adapter->hw, i, + adapter->vf_data[i].tx_rate, actual_link_speed); + } +} + +#ifdef HAVE_VF_MIN_MAX_TXRATE +static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate, + int tx_rate) +#else /* HAVE_VF_MIN_MAX_TXRATE */ +static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate) +#endif /* HAVE_VF_MIN_MAX_TXRATE */ +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + int actual_link_speed; + + if (hw->mac.type != e1000_82576) + return -EOPNOTSUPP; + +#ifdef HAVE_VF_MIN_MAX_TXRATE + if (min_tx_rate) + return -EINVAL; +#endif /* HAVE_VF_MIN_MAX_TXRATE */ + + actual_link_speed = igb_link_mbps(adapter->link_speed); + if ((vf >= adapter->vfs_allocated_count) || + (!(E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) || + (tx_rate < 0) || (tx_rate > actual_link_speed)) + return -EINVAL; + + adapter->vf_rate_link_speed = actual_link_speed; + adapter->vf_data[vf].tx_rate = (u16)tx_rate; + igb_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed); + + return 0; +} + +static int igb_ndo_get_vf_config(struct net_device *netdev, + int vf, struct ifla_vf_info *ivi) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + if (vf >= adapter->vfs_allocated_count) + return -EINVAL; + ivi->vf = vf; + memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN); +#ifdef HAVE_VF_MIN_MAX_TXRATE + ivi->max_tx_rate = adapter->vf_data[vf].tx_rate; + ivi->min_tx_rate = 0; +#else /* HAVE_VF_MIN_MAX_TXRATE */ + ivi->tx_rate = adapter->vf_data[vf].tx_rate; +#endif /* HAVE_VF_MIN_MAX_TXRATE */ + ivi->vlan = adapter->vf_data[vf].pf_vlan; + ivi->qos = adapter->vf_data[vf].pf_qos; +#ifdef HAVE_VF_SPOOFCHK_CONFIGURE + ivi->spoofchk = adapter->vf_data[vf].spoofchk_enabled; +#endif + return 0; +} +#endif +static void igb_vmm_control(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int count; + u32 reg; + + switch (hw->mac.type) { + case e1000_82575: + default: + /* replication is not supported for 82575 */ + return; + case e1000_82576: + /* notify HW that the MAC is adding vlan tags */ + reg = E1000_READ_REG(hw, E1000_DTXCTL); + reg |= (E1000_DTXCTL_VLAN_ADDED | + E1000_DTXCTL_SPOOF_INT); + E1000_WRITE_REG(hw, E1000_DTXCTL, reg); + case e1000_82580: + /* enable replication vlan tag stripping */ + reg = E1000_READ_REG(hw, E1000_RPLOLR); + reg |= E1000_RPLOLR_STRVLAN; + E1000_WRITE_REG(hw, E1000_RPLOLR, reg); + case e1000_i350: + case e1000_i354: + /* none of the above registers are supported by i350 */ + break; + } + + /* Enable Malicious Driver Detection */ + if ((adapter->vfs_allocated_count) && + (adapter->mdd)) { + if (hw->mac.type == e1000_i350) + igb_enable_mdd(adapter); + } + + /* enable replication and loopback support */ + count = adapter->vfs_allocated_count || adapter->vmdq_pools; + if (adapter->flags & IGB_FLAG_LOOPBACK_ENABLE && count) + e1000_vmdq_set_loopback_pf(hw, 1); + e1000_vmdq_set_anti_spoofing_pf(hw, + adapter->vfs_allocated_count || adapter->vmdq_pools, + adapter->vfs_allocated_count); + e1000_vmdq_set_replication_pf(hw, adapter->vfs_allocated_count || + adapter->vmdq_pools); +} + +static void igb_init_fw(struct igb_adapter *adapter) +{ + struct e1000_fw_drv_info fw_cmd; + struct e1000_hw *hw = &adapter->hw; + int i; + u16 mask; + + if (hw->mac.type == e1000_i210) + mask = E1000_SWFW_EEP_SM; + else + mask = E1000_SWFW_PHY0_SM; + /* i211 parts do not support this feature */ + if (hw->mac.type == e1000_i211) + hw->mac.arc_subsystem_valid = false; + + if (!hw->mac.ops.acquire_swfw_sync(hw, mask)) { + for (i = 0; i <= FW_MAX_RETRIES; i++) { + E1000_WRITE_REG(hw, E1000_FWSTS, E1000_FWSTS_FWRI); + fw_cmd.hdr.cmd = FW_CMD_DRV_INFO; + fw_cmd.hdr.buf_len = FW_CMD_DRV_INFO_LEN; + fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CMD_RESERVED; + fw_cmd.port_num = hw->bus.func; + fw_cmd.drv_version = FW_FAMILY_DRV_VER; + fw_cmd.hdr.checksum = 0; + fw_cmd.hdr.checksum = e1000_calculate_checksum((u8 *)&fw_cmd, + (FW_HDR_LEN + + fw_cmd.hdr.buf_len)); + e1000_host_interface_command(hw, (u8*)&fw_cmd, + sizeof(fw_cmd)); + if (fw_cmd.hdr.cmd_or_resp.ret_status == FW_STATUS_SUCCESS) + break; + } + } else + dev_warn(pci_dev_to_dev(adapter->pdev), + "Unable to get semaphore, firmware init failed.\n"); + hw->mac.ops.release_swfw_sync(hw, mask); +} + +static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) +{ + struct e1000_hw *hw = &adapter->hw; + u32 dmac_thr; + u16 hwm; + u32 status; + + if (hw->mac.type == e1000_i211) + return; + + if (hw->mac.type > e1000_82580) { + if (adapter->dmac != IGB_DMAC_DISABLE) { + u32 reg; + + /* force threshold to 0. */ + E1000_WRITE_REG(hw, E1000_DMCTXTH, 0); + + /* + * DMA Coalescing high water mark needs to be greater + * than the Rx threshold. Set hwm to PBA - max frame + * size in 16B units, capping it at PBA - 6KB. + */ + hwm = 64 * pba - adapter->max_frame_size / 16; + if (hwm < 64 * (pba - 6)) + hwm = 64 * (pba - 6); + reg = E1000_READ_REG(hw, E1000_FCRTC); + reg &= ~E1000_FCRTC_RTH_COAL_MASK; + reg |= ((hwm << E1000_FCRTC_RTH_COAL_SHIFT) + & E1000_FCRTC_RTH_COAL_MASK); + E1000_WRITE_REG(hw, E1000_FCRTC, reg); + + /* + * Set the DMA Coalescing Rx threshold to PBA - 2 * max + * frame size, capping it at PBA - 10KB. + */ + dmac_thr = pba - adapter->max_frame_size / 512; + if (dmac_thr < pba - 10) + dmac_thr = pba - 10; + reg = E1000_READ_REG(hw, E1000_DMACR); + reg &= ~E1000_DMACR_DMACTHR_MASK; + reg |= ((dmac_thr << E1000_DMACR_DMACTHR_SHIFT) + & E1000_DMACR_DMACTHR_MASK); + + /* transition to L0x or L1 if available..*/ + reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK); + + /* Check if status is 2.5Gb backplane connection + * before configuration of watchdog timer, which is + * in msec values in 12.8usec intervals + * watchdog timer= msec values in 32usec intervals + * for non 2.5Gb connection + */ + if (hw->mac.type == e1000_i354) { + status = E1000_READ_REG(hw, E1000_STATUS); + if ((status & E1000_STATUS_2P5_SKU) && + (!(status & E1000_STATUS_2P5_SKU_OVER))) + reg |= ((adapter->dmac * 5) >> 6); + else + reg |= ((adapter->dmac) >> 5); + } else { + reg |= ((adapter->dmac) >> 5); + } + + /* + * Disable BMC-to-OS Watchdog enable + * on devices that support OS-to-BMC + */ + if (hw->mac.type != e1000_i354) + reg &= ~E1000_DMACR_DC_BMC2OSW_EN; + E1000_WRITE_REG(hw, E1000_DMACR, reg); + + /* no lower threshold to disable coalescing(smart fifb)-UTRESH=0*/ + E1000_WRITE_REG(hw, E1000_DMCRTRH, 0); + + /* This sets the time to wait before requesting + * transition to low power state to number of usecs + * needed to receive 1 512 byte frame at gigabit + * line rate. On i350 device, time to make transition + * to Lx state is delayed by 4 usec with flush disable + * bit set to avoid losing mailbox interrupts + */ + reg = E1000_READ_REG(hw, E1000_DMCTLX); + if (hw->mac.type == e1000_i350) + reg |= IGB_DMCTLX_DCFLUSH_DIS; + + /* in 2.5Gb connection, TTLX unit is 0.4 usec + * which is 0x4*2 = 0xA. But delay is still 4 usec + */ + if (hw->mac.type == e1000_i354) { + status = E1000_READ_REG(hw, E1000_STATUS); + if ((status & E1000_STATUS_2P5_SKU) && + (!(status & E1000_STATUS_2P5_SKU_OVER))) + reg |= 0xA; + else + reg |= 0x4; + } else { + reg |= 0x4; + } + E1000_WRITE_REG(hw, E1000_DMCTLX, reg); + + /* free space in tx packet buffer to wake from DMA coal */ + E1000_WRITE_REG(hw, E1000_DMCTXTH, (IGB_MIN_TXPBSIZE - + (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6); + + /* make low power state decision controlled by DMA coal */ + reg = E1000_READ_REG(hw, E1000_PCIEMISC); + reg &= ~E1000_PCIEMISC_LX_DECISION; + E1000_WRITE_REG(hw, E1000_PCIEMISC, reg); + } /* endif adapter->dmac is not disabled */ + } else if (hw->mac.type == e1000_82580) { + u32 reg = E1000_READ_REG(hw, E1000_PCIEMISC); + E1000_WRITE_REG(hw, E1000_PCIEMISC, + reg & ~E1000_PCIEMISC_LX_DECISION); + E1000_WRITE_REG(hw, E1000_DMACR, 0); + } +} + +#ifdef HAVE_I2C_SUPPORT +/* igb_read_i2c_byte - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: device address + * @data: value read + * + * Performs byte read operation over I2C interface at + * a specified device address. + */ +s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); + struct i2c_client *this_client = adapter->i2c_client; + s32 status; + u16 swfw_mask = 0; + + if (!this_client) + return E1000_ERR_I2C; + + swfw_mask = E1000_SWFW_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) + != E1000_SUCCESS) + return E1000_ERR_SWFW_SYNC; + + status = i2c_smbus_read_byte_data(this_client, byte_offset); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + + if (status < 0) + return E1000_ERR_I2C; + else { + *data = status; + return E1000_SUCCESS; + } +} + +/* igb_write_i2c_byte - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: value to write + * + * Performs byte write operation over I2C interface at + * a specified device address. + */ +s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); + struct i2c_client *this_client = adapter->i2c_client; + s32 status; + u16 swfw_mask = E1000_SWFW_PHY0_SM; + + if (!this_client) + return E1000_ERR_I2C; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) + return E1000_ERR_SWFW_SYNC; + status = i2c_smbus_write_byte_data(this_client, byte_offset, data); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + + if (status) + return E1000_ERR_I2C; + else + return E1000_SUCCESS; +} +#endif /* HAVE_I2C_SUPPORT */ +/* igb_main.c */ + + +/** + * igb_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in igb_pci_tbl + * + * Returns 0 on success, negative on failure + * + * igb_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ +int igb_kni_probe(struct pci_dev *pdev, + struct net_device **lad_dev) +{ + struct net_device *netdev; + struct igb_adapter *adapter; + struct e1000_hw *hw; + u16 eeprom_data = 0; + u8 pba_str[E1000_PBANUM_LENGTH]; + s32 ret_val; + static int global_quad_port_a; /* global quad port a indication */ + int i, err, pci_using_dac = 0; + static int cards_found; + + err = pci_enable_device_mem(pdev); + if (err) + return err; + +#ifdef NO_KNI + pci_using_dac = 0; + err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); + if (!err) { + err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); + if (!err) + pci_using_dac = 1; + } else { + err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); + if (err) { + err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); + if (err) { + IGB_ERR("No usable DMA configuration, " + "aborting\n"); + goto err_dma; + } + } + } + +#ifndef HAVE_ASPM_QUIRKS + /* 82575 requires that the pci-e link partner disable the L0s state */ + switch (pdev->device) { + case E1000_DEV_ID_82575EB_COPPER: + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82575GB_QUAD_COPPER: + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); + default: + break; + } + +#endif /* HAVE_ASPM_QUIRKS */ + err = pci_request_selected_regions(pdev, + pci_select_bars(pdev, + IORESOURCE_MEM), + igb_driver_name); + if (err) + goto err_pci_reg; + + pci_enable_pcie_error_reporting(pdev); + + pci_set_master(pdev); + + err = -ENOMEM; +#endif /* NO_KNI */ +#ifdef HAVE_TX_MQ + netdev = alloc_etherdev_mq(sizeof(struct igb_adapter), + IGB_MAX_TX_QUEUES); +#else + netdev = alloc_etherdev(sizeof(struct igb_adapter)); +#endif /* HAVE_TX_MQ */ + if (!netdev) + goto err_alloc_etherdev; + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &pdev->dev); + + //pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + hw = &adapter->hw; + hw->back = adapter; + adapter->port_num = hw->bus.func; + adapter->msg_enable = (1 << debug) - 1; + +#ifdef HAVE_PCI_ERS + err = pci_save_state(pdev); + if (err) + goto err_ioremap; +#endif + err = -EIO; + hw->hw_addr = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!hw->hw_addr) + goto err_ioremap; + +#ifdef HAVE_NET_DEVICE_OPS + netdev->netdev_ops = &igb_netdev_ops; +#else /* HAVE_NET_DEVICE_OPS */ + netdev->open = &igb_open; + netdev->stop = &igb_close; + netdev->get_stats = &igb_get_stats; +#ifdef HAVE_SET_RX_MODE + netdev->set_rx_mode = &igb_set_rx_mode; +#endif + netdev->set_multicast_list = &igb_set_rx_mode; + netdev->set_mac_address = &igb_set_mac; + netdev->change_mtu = &igb_change_mtu; + netdev->do_ioctl = &igb_ioctl; +#ifdef HAVE_TX_TIMEOUT + netdev->tx_timeout = &igb_tx_timeout; +#endif + netdev->vlan_rx_register = igb_vlan_mode; + netdev->vlan_rx_add_vid = igb_vlan_rx_add_vid; + netdev->vlan_rx_kill_vid = igb_vlan_rx_kill_vid; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = igb_netpoll; +#endif + netdev->hard_start_xmit = &igb_xmit_frame; +#endif /* HAVE_NET_DEVICE_OPS */ + igb_set_ethtool_ops(netdev); +#ifdef HAVE_TX_TIMEOUT + netdev->watchdog_timeo = 5 * HZ; +#endif + + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + + adapter->bd_number = cards_found; + + /* setup the private structure */ + err = igb_sw_init(adapter); + if (err) + goto err_sw_init; + + e1000_get_bus_info(hw); + + hw->phy.autoneg_wait_to_complete = FALSE; + hw->mac.adaptive_ifs = FALSE; + + /* Copper options */ + if (hw->phy.media_type == e1000_media_type_copper) { + hw->phy.mdix = AUTO_ALL_MODES; + hw->phy.disable_polarity_correction = FALSE; + hw->phy.ms_type = e1000_ms_hw_default; + } + + if (e1000_check_reset_block(hw)) + dev_info(pci_dev_to_dev(pdev), + "PHY reset is blocked due to SOL/IDER session.\n"); + + /* + * features is initialized to 0 in allocation, it might have bits + * set by igb_sw_init so we should use an or instead of an + * assignment. + */ + netdev->features |= NETIF_F_SG | + NETIF_F_IP_CSUM | +#ifdef NETIF_F_IPV6_CSUM + NETIF_F_IPV6_CSUM | +#endif +#ifdef NETIF_F_TSO + NETIF_F_TSO | +#ifdef NETIF_F_TSO6 + NETIF_F_TSO6 | +#endif +#endif /* NETIF_F_TSO */ +#ifdef NETIF_F_RXHASH + NETIF_F_RXHASH | +#endif + NETIF_F_RXCSUM | +#ifdef NETIF_F_HW_VLAN_CTAG_RX + NETIF_F_HW_VLAN_CTAG_RX | + NETIF_F_HW_VLAN_CTAG_TX; +#else + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_TX; +#endif + + if (hw->mac.type >= e1000_82576) + netdev->features |= NETIF_F_SCTP_CSUM; + +#ifdef HAVE_NDO_SET_FEATURES + /* copy netdev features into list of user selectable features */ + netdev->hw_features |= netdev->features; +#ifndef IGB_NO_LRO + + /* give us the option of enabling LRO later */ + netdev->hw_features |= NETIF_F_LRO; +#endif +#else +#ifdef NETIF_F_GRO + + /* this is only needed on kernels prior to 2.6.39 */ + netdev->features |= NETIF_F_GRO; +#endif +#endif + + /* set this bit last since it cannot be part of hw_features */ +#ifdef NETIF_F_HW_VLAN_CTAG_FILTER + netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; +#else + netdev->features |= NETIF_F_HW_VLAN_FILTER; +#endif + +#ifdef HAVE_NETDEV_VLAN_FEATURES + netdev->vlan_features |= NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | + NETIF_F_SG; + +#endif + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + +#ifdef NO_KNI + adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw); +#ifdef DEBUG + if (adapter->dmac != IGB_DMAC_DISABLE) + printk("%s: DMA Coalescing is enabled..\n", netdev->name); +#endif + + /* before reading the NVM, reset the controller to put the device in a + * known good starting state */ + e1000_reset_hw(hw); +#endif /* NO_KNI */ + + /* make sure the NVM is good */ + if (e1000_validate_nvm_checksum(hw) < 0) { + dev_err(pci_dev_to_dev(pdev), "The NVM Checksum Is Not" + " Valid\n"); + err = -EIO; + goto err_eeprom; + } + + /* copy the MAC address out of the NVM */ + if (e1000_read_mac_addr(hw)) + dev_err(pci_dev_to_dev(pdev), "NVM Read Error\n"); + memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); +#ifdef ETHTOOL_GPERMADDR + memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); + + if (!is_valid_ether_addr(netdev->perm_addr)) { +#else + if (!is_valid_ether_addr(netdev->dev_addr)) { +#endif + dev_err(pci_dev_to_dev(pdev), "Invalid MAC Address\n"); + err = -EIO; + goto err_eeprom; + } + + memcpy(&adapter->mac_table[0].addr, hw->mac.addr, netdev->addr_len); + adapter->mac_table[0].queue = adapter->vfs_allocated_count; + adapter->mac_table[0].state = (IGB_MAC_STATE_DEFAULT | IGB_MAC_STATE_IN_USE); + igb_rar_set(adapter, 0); + + /* get firmware version for ethtool -i */ + igb_set_fw_version(adapter); + + /* Check if Media Autosense is enabled */ + if (hw->mac.type == e1000_82580) + igb_init_mas(adapter); + +#ifdef NO_KNI +#ifdef HAVE_TIMER_SETUP + timer_setup(&adapter->watchdog_timer, &igb_watchdog, 0); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + timer_setup(&adapter->dma_err_timer, &igb_dma_err_timer, 0); + timer_setup(&adapter->phy_info_timer, &igb_update_phy_info, 0); +#else + setup_timer(&adapter->watchdog_timer, &igb_watchdog, + (unsigned long) adapter); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + setup_timer(&adapter->dma_err_timer, &igb_dma_err_timer, + (unsigned long) adapter); + setup_timer(&adapter->phy_info_timer, &igb_update_phy_info, + (unsigned long) adapter); +#endif + + INIT_WORK(&adapter->reset_task, igb_reset_task); + INIT_WORK(&adapter->watchdog_task, igb_watchdog_task); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + INIT_WORK(&adapter->dma_err_task, igb_dma_err_task); +#endif + + /* Initialize link properties that are user-changeable */ + adapter->fc_autoneg = true; + hw->mac.autoneg = true; + hw->phy.autoneg_advertised = 0x2f; + + hw->fc.requested_mode = e1000_fc_default; + hw->fc.current_mode = e1000_fc_default; + + e1000_validate_mdi_setting(hw); + + /* By default, support wake on port A */ + if (hw->bus.func == 0) + adapter->flags |= IGB_FLAG_WOL_SUPPORTED; + + /* Check the NVM for wake support for non-port A ports */ + if (hw->mac.type >= e1000_82580) + hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + + NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, + &eeprom_data); + else if (hw->bus.func == 1) + e1000_read_nvm(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); + + if (eeprom_data & IGB_EEPROM_APME) + adapter->flags |= IGB_FLAG_WOL_SUPPORTED; + + /* now that we have the eeprom settings, apply the special cases where + * the eeprom may be wrong or the board simply won't support wake on + * lan on a particular port */ + switch (pdev->device) { + case E1000_DEV_ID_82575GB_QUAD_COPPER: + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + break; + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: + /* Wake events only supported on port A for dual fiber + * regardless of eeprom setting */ + if (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_FUNC_1) + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + break; + case E1000_DEV_ID_82576_QUAD_COPPER: + case E1000_DEV_ID_82576_QUAD_COPPER_ET2: + /* if quad port adapter, disable WoL on all but port A */ + if (global_quad_port_a != 0) + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + else + adapter->flags |= IGB_FLAG_QUAD_PORT_A; + /* Reset for multiple quad port adapters */ + if (++global_quad_port_a == 4) + global_quad_port_a = 0; + break; + default: + /* If the device can't wake, don't set software support */ + if (!device_can_wakeup(&adapter->pdev->dev)) + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + break; + } + + /* initialize the wol settings based on the eeprom settings */ + if (adapter->flags & IGB_FLAG_WOL_SUPPORTED) + adapter->wol |= E1000_WUFC_MAG; + + /* Some vendors want WoL disabled by default, but still supported */ + if ((hw->mac.type == e1000_i350) && + (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) { + adapter->flags |= IGB_FLAG_WOL_SUPPORTED; + adapter->wol = 0; + } + +#ifdef NO_KNI + device_set_wakeup_enable(pci_dev_to_dev(adapter->pdev), + adapter->flags & IGB_FLAG_WOL_SUPPORTED); + + /* reset the hardware with the new settings */ + igb_reset(adapter); + adapter->devrc = 0; + +#ifdef HAVE_I2C_SUPPORT + /* Init the I2C interface */ + err = igb_init_i2c(adapter); + if (err) { + dev_err(&pdev->dev, "failed to init i2c interface\n"); + goto err_eeprom; + } +#endif /* HAVE_I2C_SUPPORT */ + + /* let the f/w know that the h/w is now under the control of the + * driver. */ + igb_get_hw_control(adapter); + + strncpy(netdev->name, "eth%d", IFNAMSIZ); + err = register_netdev(netdev); + if (err) + goto err_register; + +#ifdef CONFIG_IGB_VMDQ_NETDEV + err = igb_init_vmdq_netdevs(adapter); + if (err) + goto err_register; +#endif + /* carrier off reporting is important to ethtool even BEFORE open */ + netif_carrier_off(netdev); + +#ifdef IGB_DCA + if (dca_add_requester(&pdev->dev) == E1000_SUCCESS) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; + dev_info(pci_dev_to_dev(pdev), "DCA enabled\n"); + igb_setup_dca(adapter); + } + +#endif +#ifdef HAVE_PTP_1588_CLOCK + /* do hw tstamp init after resetting */ + igb_ptp_init(adapter); +#endif /* HAVE_PTP_1588_CLOCK */ + +#endif /* NO_KNI */ + dev_info(pci_dev_to_dev(pdev), "Intel(R) Gigabit Ethernet Network Connection\n"); + /* print bus type/speed/width info */ + dev_info(pci_dev_to_dev(pdev), "%s: (PCIe:%s:%s) ", + netdev->name, + ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5GT/s" : + (hw->bus.speed == e1000_bus_speed_5000) ? "5.0GT/s" : + (hw->mac.type == e1000_i354) ? "integrated" : + "unknown"), + ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : + (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" : + (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" : + (hw->mac.type == e1000_i354) ? "integrated" : + "unknown")); + dev_info(pci_dev_to_dev(pdev), "%s: MAC: ", netdev->name); + for (i = 0; i < 6; i++) + printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':'); + + ret_val = e1000_read_pba_string(hw, pba_str, E1000_PBANUM_LENGTH); + if (ret_val) + strncpy(pba_str, "Unknown", sizeof(pba_str) - 1); + dev_info(pci_dev_to_dev(pdev), "%s: PBA No: %s\n", netdev->name, + pba_str); + + + /* Initialize the thermal sensor on i350 devices. */ + if (hw->mac.type == e1000_i350) { + if (hw->bus.func == 0) { + u16 ets_word; + + /* + * Read the NVM to determine if this i350 device + * supports an external thermal sensor. + */ + e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_word); + if (ets_word != 0x0000 && ets_word != 0xFFFF) + adapter->ets = true; + else + adapter->ets = false; + } +#ifdef NO_KNI +#ifdef IGB_HWMON + + igb_sysfs_init(adapter); +#else +#ifdef IGB_PROCFS + + igb_procfs_init(adapter); +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ +#endif /* NO_KNI */ + } else { + adapter->ets = false; + } + + if (hw->phy.media_type == e1000_media_type_copper) { + switch (hw->mac.type) { + case e1000_i350: + case e1000_i210: + case e1000_i211: + /* Enable EEE for internal copper PHY devices */ + err = e1000_set_eee_i350(hw); + if ((!err) && + (adapter->flags & IGB_FLAG_EEE)) + adapter->eee_advert = + MDIO_EEE_100TX | MDIO_EEE_1000T; + break; + case e1000_i354: + if ((E1000_READ_REG(hw, E1000_CTRL_EXT)) & + (E1000_CTRL_EXT_LINK_MODE_SGMII)) { + err = e1000_set_eee_i354(hw); + if ((!err) && + (adapter->flags & IGB_FLAG_EEE)) + adapter->eee_advert = + MDIO_EEE_100TX | MDIO_EEE_1000T; + } + break; + default: + break; + } + } + + /* send driver version info to firmware */ + if (hw->mac.type >= e1000_i350) + igb_init_fw(adapter); + +#ifndef IGB_NO_LRO + if (netdev->features & NETIF_F_LRO) + dev_info(pci_dev_to_dev(pdev), "Internal LRO is enabled \n"); + else + dev_info(pci_dev_to_dev(pdev), "LRO is disabled \n"); +#endif + dev_info(pci_dev_to_dev(pdev), + "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n", + adapter->msix_entries ? "MSI-X" : + (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy", + adapter->num_rx_queues, adapter->num_tx_queues); + + cards_found++; + *lad_dev = netdev; + + pm_runtime_put_noidle(&pdev->dev); + return 0; + +//err_register: +// igb_release_hw_control(adapter); +#ifdef HAVE_I2C_SUPPORT + memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap)); +#endif /* HAVE_I2C_SUPPORT */ +err_eeprom: +// if (!e1000_check_reset_block(hw)) +// e1000_phy_hw_reset(hw); + + if (hw->flash_address) + iounmap(hw->flash_address); +err_sw_init: +// igb_clear_interrupt_scheme(adapter); +// igb_reset_sriov_capability(adapter); + iounmap(hw->hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: +// pci_release_selected_regions(pdev, +// pci_select_bars(pdev, IORESOURCE_MEM)); +//err_pci_reg: +//err_dma: + pci_disable_device(pdev); + return err; +} + + +void igb_kni_remove(struct pci_dev *pdev) +{ + pci_disable_device(pdev); +} diff --git a/kernel/linux/kni/ethtool/igb/igb_param.c b/kernel/linux/kni/ethtool/igb/igb_param.c new file mode 100644 index 00000000..98209a10 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb_param.c @@ -0,0 +1,832 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + + +#include <linux/netdevice.h> + +#include "igb.h" + +/* This is the only thing that needs to be changed to adjust the + * maximum number of ports that the driver can manage. + */ + +#define IGB_MAX_NIC 32 + +#define OPTION_UNSET -1 +#define OPTION_DISABLED 0 +#define OPTION_ENABLED 1 +#define MAX_NUM_LIST_OPTS 15 + +/* All parameters are treated the same, as an integer array of values. + * This macro just reduces the need to repeat the same declaration code + * over and over (plus this helps to avoid typo bugs). + */ + +#define IGB_PARAM_INIT { [0 ... IGB_MAX_NIC] = OPTION_UNSET } +#ifndef module_param_array +/* Module Parameters are always initialized to -1, so that the driver + * can tell the difference between no user specified value or the + * user asking for the default value. + * The true default values are loaded in when igb_check_options is called. + * + * This is a GCC extension to ANSI C. + * See the item "Labeled Elements in Initializers" in the section + * "Extensions to the C Language Family" of the GCC documentation. + */ + +#define IGB_PARAM(X, desc) \ + static const int X[IGB_MAX_NIC+1] = IGB_PARAM_INIT; \ + MODULE_PARM(X, "1-" __MODULE_STRING(IGB_MAX_NIC) "i"); \ + MODULE_PARM_DESC(X, desc); +#else +#define IGB_PARAM(X, desc) \ + static int X[IGB_MAX_NIC+1] = IGB_PARAM_INIT; \ + static unsigned int num_##X; \ + module_param_array_named(X, X, int, &num_##X, 0); \ + MODULE_PARM_DESC(X, desc); +#endif + +/* Interrupt Throttle Rate (interrupts/sec) + * + * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) + */ +IGB_PARAM(InterruptThrottleRate, + "Maximum interrupts per second, per vector, (max 100000), default 3=adaptive"); +#define DEFAULT_ITR 3 +#define MAX_ITR 100000 +/* #define MIN_ITR 120 */ +#define MIN_ITR 0 +/* IntMode (Interrupt Mode) + * + * Valid Range: 0 - 2 + * + * Default Value: 2 (MSI-X) + */ +IGB_PARAM(IntMode, "Change Interrupt Mode (0=Legacy, 1=MSI, 2=MSI-X), default 2"); +#define MAX_INTMODE IGB_INT_MODE_MSIX +#define MIN_INTMODE IGB_INT_MODE_LEGACY + +IGB_PARAM(Node, "set the starting node to allocate memory on, default -1"); + +/* LLIPort (Low Latency Interrupt TCP Port) + * + * Valid Range: 0 - 65535 + * + * Default Value: 0 (disabled) + */ +IGB_PARAM(LLIPort, "Low Latency Interrupt TCP Port (0-65535), default 0=off"); + +#define DEFAULT_LLIPORT 0 +#define MAX_LLIPORT 0xFFFF +#define MIN_LLIPORT 0 + +/* LLIPush (Low Latency Interrupt on TCP Push flag) + * + * Valid Range: 0, 1 + * + * Default Value: 0 (disabled) + */ +IGB_PARAM(LLIPush, "Low Latency Interrupt on TCP Push flag (0,1), default 0=off"); + +#define DEFAULT_LLIPUSH 0 +#define MAX_LLIPUSH 1 +#define MIN_LLIPUSH 0 + +/* LLISize (Low Latency Interrupt on Packet Size) + * + * Valid Range: 0 - 1500 + * + * Default Value: 0 (disabled) + */ +IGB_PARAM(LLISize, "Low Latency Interrupt on Packet Size (0-1500), default 0=off"); + +#define DEFAULT_LLISIZE 0 +#define MAX_LLISIZE 1500 +#define MIN_LLISIZE 0 + +/* RSS (Enable RSS multiqueue receive) + * + * Valid Range: 0 - 8 + * + * Default Value: 1 + */ +IGB_PARAM(RSS, "Number of Receive-Side Scaling Descriptor Queues (0-8), default 1, 0=number of cpus"); + +#define DEFAULT_RSS 1 +#define MAX_RSS 8 +#define MIN_RSS 0 + +/* VMDQ (Enable VMDq multiqueue receive) + * + * Valid Range: 0 - 8 + * + * Default Value: 0 + */ +IGB_PARAM(VMDQ, "Number of Virtual Machine Device Queues: 0-1 = disable, 2-8 enable, default 0"); + +#define DEFAULT_VMDQ 0 +#define MAX_VMDQ MAX_RSS +#define MIN_VMDQ 0 + +/* max_vfs (Enable SR-IOV VF devices) + * + * Valid Range: 0 - 7 + * + * Default Value: 0 + */ +IGB_PARAM(max_vfs, "Number of Virtual Functions: 0 = disable, 1-7 enable, default 0"); + +#define DEFAULT_SRIOV 0 +#define MAX_SRIOV 7 +#define MIN_SRIOV 0 + +/* MDD (Enable Malicious Driver Detection) + * + * Only available when SR-IOV is enabled - max_vfs is greater than 0 + * + * Valid Range: 0, 1 + * + * Default Value: 1 + */ +IGB_PARAM(MDD, "Malicious Driver Detection (0/1), default 1 = enabled. " + "Only available when max_vfs is greater than 0"); + +#ifdef DEBUG + +/* Disable Hardware Reset on Tx Hang + * + * Valid Range: 0, 1 + * + * Default Value: 0 (disabled, i.e. h/w will reset) + */ +IGB_PARAM(DisableHwReset, "Disable reset of hardware on Tx hang"); + +/* Dump Transmit and Receive buffers + * + * Valid Range: 0, 1 + * + * Default Value: 0 + */ +IGB_PARAM(DumpBuffers, "Dump Tx/Rx buffers on Tx hang or by request"); + +#endif /* DEBUG */ + +/* QueuePairs (Enable TX/RX queue pairs for interrupt handling) + * + * Valid Range: 0 - 1 + * + * Default Value: 1 + */ +IGB_PARAM(QueuePairs, "Enable Tx/Rx queue pairs for interrupt handling (0,1), default 1=on"); + +#define DEFAULT_QUEUE_PAIRS 1 +#define MAX_QUEUE_PAIRS 1 +#define MIN_QUEUE_PAIRS 0 + +/* Enable/disable EEE (a.k.a. IEEE802.3az) + * + * Valid Range: 0, 1 + * + * Default Value: 1 + */ + IGB_PARAM(EEE, "Enable/disable on parts that support the feature"); + +/* Enable/disable DMA Coalescing + * + * Valid Values: 0(off), 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, + * 9000, 10000(msec), 250(usec), 500(usec) + * + * Default Value: 0 + */ + IGB_PARAM(DMAC, "Disable or set latency for DMA Coalescing ((0=off, 1000-10000(msec), 250, 500 (usec))"); + +#ifndef IGB_NO_LRO +/* Enable/disable Large Receive Offload + * + * Valid Values: 0(off), 1(on) + * + * Default Value: 0 + */ + IGB_PARAM(LRO, "Large Receive Offload (0,1), default 0=off"); + +#endif +struct igb_opt_list { + int i; + char *str; +}; +struct igb_option { + enum { enable_option, range_option, list_option } type; + const char *name; + const char *err; + int def; + union { + struct { /* range_option info */ + int min; + int max; + } r; + struct { /* list_option info */ + int nr; + struct igb_opt_list *p; + } l; + } arg; +}; + +static int igb_validate_option(unsigned int *value, + struct igb_option *opt, + struct igb_adapter *adapter) +{ + if (*value == OPTION_UNSET) { + *value = opt->def; + return 0; + } + + switch (opt->type) { + case enable_option: + switch (*value) { + case OPTION_ENABLED: + DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name); + return 0; + case OPTION_DISABLED: + DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name); + return 0; + } + break; + case range_option: + if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { + DPRINTK(PROBE, INFO, + "%s set to %d\n", opt->name, *value); + return 0; + } + break; + case list_option: { + int i; + struct igb_opt_list *ent; + + for (i = 0; i < opt->arg.l.nr; i++) { + ent = &opt->arg.l.p[i]; + if (*value == ent->i) { + if (ent->str[0] != '\0') + DPRINTK(PROBE, INFO, "%s\n", ent->str); + return 0; + } + } + } + break; + default: + BUG(); + } + + DPRINTK(PROBE, INFO, "Invalid %s value specified (%d) %s\n", + opt->name, *value, opt->err); + *value = opt->def; + return -1; +} + +/** + * igb_check_options - Range Checking for Command Line Parameters + * @adapter: board private structure + * + * This routine checks all command line parameters for valid user + * input. If an invalid value is given, or if no user specified + * value exists, a default value is used. The final value is stored + * in a variable in the adapter structure. + **/ + +void igb_check_options(struct igb_adapter *adapter) +{ + int bd = adapter->bd_number; + struct e1000_hw *hw = &adapter->hw; + + if (bd >= IGB_MAX_NIC) { + DPRINTK(PROBE, NOTICE, + "Warning: no configuration for board #%d\n", bd); + DPRINTK(PROBE, NOTICE, "Using defaults for all values\n"); +#ifndef module_param_array + bd = IGB_MAX_NIC; +#endif + } + + { /* Interrupt Throttling Rate */ + struct igb_option opt = { + .type = range_option, + .name = "Interrupt Throttling Rate (ints/sec)", + .err = "using default of " __MODULE_STRING(DEFAULT_ITR), + .def = DEFAULT_ITR, + .arg = { .r = { .min = MIN_ITR, + .max = MAX_ITR } } + }; + +#ifdef module_param_array + if (num_InterruptThrottleRate > bd) { +#endif + unsigned int itr = InterruptThrottleRate[bd]; + + switch (itr) { + case 0: + DPRINTK(PROBE, INFO, "%s turned off\n", + opt.name); + if (hw->mac.type >= e1000_i350) + adapter->dmac = IGB_DMAC_DISABLE; + adapter->rx_itr_setting = itr; + break; + case 1: + DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", + opt.name); + adapter->rx_itr_setting = itr; + break; + case 3: + DPRINTK(PROBE, INFO, + "%s set to dynamic conservative mode\n", + opt.name); + adapter->rx_itr_setting = itr; + break; + default: + igb_validate_option(&itr, &opt, adapter); + /* Save the setting, because the dynamic bits + * change itr. In case of invalid user value, + * default to conservative mode, else need to + * clear the lower two bits because they are + * used as control */ + if (itr == 3) { + adapter->rx_itr_setting = itr; + } else { + adapter->rx_itr_setting = 1000000000 / + (itr * 256); + adapter->rx_itr_setting &= ~3; + } + break; + } +#ifdef module_param_array + } else { + adapter->rx_itr_setting = opt.def; + } +#endif + adapter->tx_itr_setting = adapter->rx_itr_setting; + } + { /* Interrupt Mode */ + struct igb_option opt = { + .type = range_option, + .name = "Interrupt Mode", + .err = "defaulting to 2 (MSI-X)", + .def = IGB_INT_MODE_MSIX, + .arg = { .r = { .min = MIN_INTMODE, + .max = MAX_INTMODE } } + }; + +#ifdef module_param_array + if (num_IntMode > bd) { +#endif + unsigned int int_mode = IntMode[bd]; + igb_validate_option(&int_mode, &opt, adapter); + adapter->int_mode = int_mode; +#ifdef module_param_array + } else { + adapter->int_mode = opt.def; + } +#endif + } + { /* Low Latency Interrupt TCP Port */ + struct igb_option opt = { + .type = range_option, + .name = "Low Latency Interrupt TCP Port", + .err = "using default of " __MODULE_STRING(DEFAULT_LLIPORT), + .def = DEFAULT_LLIPORT, + .arg = { .r = { .min = MIN_LLIPORT, + .max = MAX_LLIPORT } } + }; + +#ifdef module_param_array + if (num_LLIPort > bd) { +#endif + adapter->lli_port = LLIPort[bd]; + if (adapter->lli_port) { + igb_validate_option(&adapter->lli_port, &opt, + adapter); + } else { + DPRINTK(PROBE, INFO, "%s turned off\n", + opt.name); + } +#ifdef module_param_array + } else { + adapter->lli_port = opt.def; + } +#endif + } + { /* Low Latency Interrupt on Packet Size */ + struct igb_option opt = { + .type = range_option, + .name = "Low Latency Interrupt on Packet Size", + .err = "using default of " __MODULE_STRING(DEFAULT_LLISIZE), + .def = DEFAULT_LLISIZE, + .arg = { .r = { .min = MIN_LLISIZE, + .max = MAX_LLISIZE } } + }; + +#ifdef module_param_array + if (num_LLISize > bd) { +#endif + adapter->lli_size = LLISize[bd]; + if (adapter->lli_size) { + igb_validate_option(&adapter->lli_size, &opt, + adapter); + } else { + DPRINTK(PROBE, INFO, "%s turned off\n", + opt.name); + } +#ifdef module_param_array + } else { + adapter->lli_size = opt.def; + } +#endif + } + { /* Low Latency Interrupt on TCP Push flag */ + struct igb_option opt = { + .type = enable_option, + .name = "Low Latency Interrupt on TCP Push flag", + .err = "defaulting to Disabled", + .def = OPTION_DISABLED + }; + +#ifdef module_param_array + if (num_LLIPush > bd) { +#endif + unsigned int lli_push = LLIPush[bd]; + igb_validate_option(&lli_push, &opt, adapter); + adapter->flags |= lli_push ? IGB_FLAG_LLI_PUSH : 0; +#ifdef module_param_array + } else { + adapter->flags |= opt.def ? IGB_FLAG_LLI_PUSH : 0; + } +#endif + } + { /* SRIOV - Enable SR-IOV VF devices */ + struct igb_option opt = { + .type = range_option, + .name = "max_vfs - SR-IOV VF devices", + .err = "using default of " __MODULE_STRING(DEFAULT_SRIOV), + .def = DEFAULT_SRIOV, + .arg = { .r = { .min = MIN_SRIOV, + .max = MAX_SRIOV } } + }; + +#ifdef module_param_array + if (num_max_vfs > bd) { +#endif + adapter->vfs_allocated_count = max_vfs[bd]; + igb_validate_option(&adapter->vfs_allocated_count, &opt, adapter); + +#ifdef module_param_array + } else { + adapter->vfs_allocated_count = opt.def; + } +#endif + if (adapter->vfs_allocated_count) { + switch (hw->mac.type) { + case e1000_82575: + case e1000_82580: + case e1000_i210: + case e1000_i211: + case e1000_i354: + adapter->vfs_allocated_count = 0; + DPRINTK(PROBE, INFO, "SR-IOV option max_vfs not supported.\n"); + default: + break; + } + } + } + { /* VMDQ - Enable VMDq multiqueue receive */ + struct igb_option opt = { + .type = range_option, + .name = "VMDQ - VMDq multiqueue queue count", + .err = "using default of " __MODULE_STRING(DEFAULT_VMDQ), + .def = DEFAULT_VMDQ, + .arg = { .r = { .min = MIN_VMDQ, + .max = (MAX_VMDQ - adapter->vfs_allocated_count) } } + }; + if ((hw->mac.type != e1000_i210) || + (hw->mac.type != e1000_i211)) { +#ifdef module_param_array + if (num_VMDQ > bd) { +#endif + adapter->vmdq_pools = (VMDQ[bd] == 1 ? 0 : VMDQ[bd]); + if (adapter->vfs_allocated_count && !adapter->vmdq_pools) { + DPRINTK(PROBE, INFO, "Enabling SR-IOV requires VMDq be set to at least 1\n"); + adapter->vmdq_pools = 1; + } + igb_validate_option(&adapter->vmdq_pools, &opt, adapter); + +#ifdef module_param_array + } else { + if (!adapter->vfs_allocated_count) + adapter->vmdq_pools = (opt.def == 1 ? 0 : opt.def); + else + adapter->vmdq_pools = 1; + } +#endif +#ifdef CONFIG_IGB_VMDQ_NETDEV + if (hw->mac.type == e1000_82575 && adapter->vmdq_pools) { + DPRINTK(PROBE, INFO, "VMDq not supported on this part.\n"); + adapter->vmdq_pools = 0; + } +#endif + + } else { + DPRINTK(PROBE, INFO, "VMDq option is not supported.\n"); + adapter->vmdq_pools = opt.def; + } + } + { /* RSS - Enable RSS multiqueue receives */ + struct igb_option opt = { + .type = range_option, + .name = "RSS - RSS multiqueue receive count", + .err = "using default of " __MODULE_STRING(DEFAULT_RSS), + .def = DEFAULT_RSS, + .arg = { .r = { .min = MIN_RSS, + .max = MAX_RSS } } + }; + + switch (hw->mac.type) { + case e1000_82575: +#ifndef CONFIG_IGB_VMDQ_NETDEV + if (!!adapter->vmdq_pools) { + if (adapter->vmdq_pools <= 2) { + if (adapter->vmdq_pools == 2) + opt.arg.r.max = 3; + } else { + opt.arg.r.max = 1; + } + } else { + opt.arg.r.max = 4; + } +#else + opt.arg.r.max = !!adapter->vmdq_pools ? 1 : 4; +#endif /* CONFIG_IGB_VMDQ_NETDEV */ + break; + case e1000_i210: + opt.arg.r.max = 4; + break; + case e1000_i211: + opt.arg.r.max = 2; + break; + case e1000_82576: +#ifndef CONFIG_IGB_VMDQ_NETDEV + if (!!adapter->vmdq_pools) + opt.arg.r.max = 2; + break; +#endif /* CONFIG_IGB_VMDQ_NETDEV */ + case e1000_82580: + case e1000_i350: + case e1000_i354: + default: + if (!!adapter->vmdq_pools) + opt.arg.r.max = 1; + break; + } + + if (adapter->int_mode != IGB_INT_MODE_MSIX) { + DPRINTK(PROBE, INFO, "RSS is not supported when in MSI/Legacy Interrupt mode, %s\n", + opt.err); + opt.arg.r.max = 1; + } + +#ifdef module_param_array + if (num_RSS > bd) { +#endif + adapter->rss_queues = RSS[bd]; + switch (adapter->rss_queues) { + case 1: + break; + default: + igb_validate_option(&adapter->rss_queues, &opt, adapter); + if (adapter->rss_queues) + break; + case 0: + adapter->rss_queues = min_t(u32, opt.arg.r.max, num_online_cpus()); + break; + } +#ifdef module_param_array + } else { + adapter->rss_queues = opt.def; + } +#endif + } + { /* QueuePairs - Enable Tx/Rx queue pairs for interrupt handling */ + struct igb_option opt = { + .type = enable_option, + .name = "QueuePairs - Tx/Rx queue pairs for interrupt handling", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; +#ifdef module_param_array + if (num_QueuePairs > bd) { +#endif + unsigned int qp = QueuePairs[bd]; + /* + * We must enable queue pairs if the number of queues + * exceeds the number of available interrupts. We are + * limited to 10, or 3 per unallocated vf. On I210 and + * I211 devices, we are limited to 5 interrupts. + * However, since I211 only supports 2 queues, we do not + * need to check and override the user option. + */ + if (qp == OPTION_DISABLED) { + if (adapter->rss_queues > 4) + qp = OPTION_ENABLED; + + if (adapter->vmdq_pools > 4) + qp = OPTION_ENABLED; + + if (adapter->rss_queues > 1 && + (adapter->vmdq_pools > 3 || + adapter->vfs_allocated_count > 6)) + qp = OPTION_ENABLED; + + if (hw->mac.type == e1000_i210 && + adapter->rss_queues > 2) + qp = OPTION_ENABLED; + + if (qp == OPTION_ENABLED) + DPRINTK(PROBE, INFO, "Number of queues exceeds available interrupts, %s\n", + opt.err); + } + igb_validate_option(&qp, &opt, adapter); + adapter->flags |= qp ? IGB_FLAG_QUEUE_PAIRS : 0; +#ifdef module_param_array + } else { + adapter->flags |= opt.def ? IGB_FLAG_QUEUE_PAIRS : 0; + } +#endif + } + { /* EEE - Enable EEE for capable adapters */ + + if (hw->mac.type >= e1000_i350) { + struct igb_option opt = { + .type = enable_option, + .name = "EEE Support", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; +#ifdef module_param_array + if (num_EEE > bd) { +#endif + unsigned int eee = EEE[bd]; + igb_validate_option(&eee, &opt, adapter); + adapter->flags |= eee ? IGB_FLAG_EEE : 0; + if (eee) + hw->dev_spec._82575.eee_disable = false; + else + hw->dev_spec._82575.eee_disable = true; + +#ifdef module_param_array + } else { + adapter->flags |= opt.def ? IGB_FLAG_EEE : 0; + if (adapter->flags & IGB_FLAG_EEE) + hw->dev_spec._82575.eee_disable = false; + else + hw->dev_spec._82575.eee_disable = true; + } +#endif + } + } + { /* DMAC - Enable DMA Coalescing for capable adapters */ + + if (hw->mac.type >= e1000_i350) { + struct igb_opt_list list [] = { + { IGB_DMAC_DISABLE, "DMAC Disable"}, + { IGB_DMAC_MIN, "DMAC 250 usec"}, + { IGB_DMAC_500, "DMAC 500 usec"}, + { IGB_DMAC_EN_DEFAULT, "DMAC 1000 usec"}, + { IGB_DMAC_2000, "DMAC 2000 usec"}, + { IGB_DMAC_3000, "DMAC 3000 usec"}, + { IGB_DMAC_4000, "DMAC 4000 usec"}, + { IGB_DMAC_5000, "DMAC 5000 usec"}, + { IGB_DMAC_6000, "DMAC 6000 usec"}, + { IGB_DMAC_7000, "DMAC 7000 usec"}, + { IGB_DMAC_8000, "DMAC 8000 usec"}, + { IGB_DMAC_9000, "DMAC 9000 usec"}, + { IGB_DMAC_MAX, "DMAC 10000 usec"} + }; + struct igb_option opt = { + .type = list_option, + .name = "DMA Coalescing", + .err = "using default of "__MODULE_STRING(IGB_DMAC_DISABLE), + .def = IGB_DMAC_DISABLE, + .arg = { .l = { .nr = 13, + .p = list + } + } + }; +#ifdef module_param_array + if (num_DMAC > bd) { +#endif + unsigned int dmac = DMAC[bd]; + if (adapter->rx_itr_setting == IGB_DMAC_DISABLE) + dmac = IGB_DMAC_DISABLE; + igb_validate_option(&dmac, &opt, adapter); + switch (dmac) { + case IGB_DMAC_DISABLE: + adapter->dmac = dmac; + break; + case IGB_DMAC_MIN: + adapter->dmac = dmac; + break; + case IGB_DMAC_500: + adapter->dmac = dmac; + break; + case IGB_DMAC_EN_DEFAULT: + adapter->dmac = dmac; + break; + case IGB_DMAC_2000: + adapter->dmac = dmac; + break; + case IGB_DMAC_3000: + adapter->dmac = dmac; + break; + case IGB_DMAC_4000: + adapter->dmac = dmac; + break; + case IGB_DMAC_5000: + adapter->dmac = dmac; + break; + case IGB_DMAC_6000: + adapter->dmac = dmac; + break; + case IGB_DMAC_7000: + adapter->dmac = dmac; + break; + case IGB_DMAC_8000: + adapter->dmac = dmac; + break; + case IGB_DMAC_9000: + adapter->dmac = dmac; + break; + case IGB_DMAC_MAX: + adapter->dmac = dmac; + break; + default: + adapter->dmac = opt.def; + DPRINTK(PROBE, INFO, + "Invalid DMAC setting, " + "resetting DMAC to %d\n", opt.def); + } +#ifdef module_param_array + } else + adapter->dmac = opt.def; +#endif + } + } +#ifndef IGB_NO_LRO + { /* LRO - Enable Large Receive Offload */ + struct igb_option opt = { + .type = enable_option, + .name = "LRO - Large Receive Offload", + .err = "defaulting to Disabled", + .def = OPTION_DISABLED + }; + struct net_device *netdev = adapter->netdev; +#ifdef module_param_array + if (num_LRO > bd) { +#endif + unsigned int lro = LRO[bd]; + igb_validate_option(&lro, &opt, adapter); + netdev->features |= lro ? NETIF_F_LRO : 0; +#ifdef module_param_array + } else if (opt.def == OPTION_ENABLED) { + netdev->features |= NETIF_F_LRO; + } +#endif + } +#endif /* IGB_NO_LRO */ + { /* MDD - Enable Malicious Driver Detection. Only available when + SR-IOV is enabled. */ + struct igb_option opt = { + .type = enable_option, + .name = "Malicious Driver Detection", + .err = "defaulting to 1", + .def = OPTION_ENABLED, + .arg = { .r = { .min = OPTION_DISABLED, + .max = OPTION_ENABLED } } + }; + +#ifdef module_param_array + if (num_MDD > bd) { +#endif + adapter->mdd = MDD[bd]; + igb_validate_option((uint *)&adapter->mdd, &opt, + adapter); +#ifdef module_param_array + } else { + adapter->mdd = opt.def; + } +#endif + } +} diff --git a/kernel/linux/kni/ethtool/igb/igb_regtest.h b/kernel/linux/kni/ethtool/igb/igb_regtest.h new file mode 100644 index 00000000..ec2b86a0 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb_regtest.h @@ -0,0 +1,234 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ethtool register test data */ +struct igb_reg_test { + u16 reg; + u16 reg_offset; + u16 array_len; + u16 test_type; + u32 mask; + u32 write; +}; + +/* In the hardware, registers are laid out either singly, in arrays + * spaced 0x100 bytes apart, or in contiguous tables. We assume + * most tests take place on arrays or single registers (handled + * as a single-element array) and special-case the tables. + * Table tests are always pattern tests. + * + * We also make provision for some required setup steps by specifying + * registers to be written without any read-back testing. + */ + +#define PATTERN_TEST 1 +#define SET_READ_TEST 2 +#define WRITE_NO_TEST 3 +#define TABLE32_TEST 4 +#define TABLE64_TEST_LO 5 +#define TABLE64_TEST_HI 6 + +/* i210 reg test */ +static struct igb_reg_test reg_test_i210[] = { + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + /* RDH is read-only for i210, only test RDT. */ + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0003FFF0, 0x0003FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, + 0x900FFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128, TABLE32_TEST, + 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +/* i350 reg test */ +static struct igb_reg_test reg_test_i350[] = { + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + /* VET is readonly on i350 */ + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + /* RDH is read-only for i350, only test RDT. */ + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, + 0xC3FFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 16, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 16, TABLE64_TEST_HI, + 0xC3FFFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128, TABLE32_TEST, + 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +/* 82580 reg test */ +static struct igb_reg_test reg_test_82580[] = { + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + /* RDH is read-only for 82580, only test RDT. */ + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, + 0x83FFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 8, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 8, TABLE64_TEST_HI, + 0x83FFFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128, TABLE32_TEST, + 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +/* 82576 reg test */ +static struct igb_reg_test reg_test_82576[] = { + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_RDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + /* Enable all queues before testing. */ + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, + { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, + /* RDH is read-only for 82576, only test RDT. */ + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RDT(4), 0x40, 12, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 }, + { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0, 0 }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_TDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, + 0x83FFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 8, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 8, TABLE64_TEST_HI, + 0x83FFFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128, TABLE32_TEST, + 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +/* 82575 register test */ +static struct igb_reg_test reg_test_82575[] = { + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + /* Enable all four RX queues before testing. */ + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, + /* RDH is read-only for 82575, only test RDT. */ + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_TXCW, 0x100, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, + 0x800FFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128, TABLE32_TEST, + 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; diff --git a/kernel/linux/kni/ethtool/igb/igb_vmdq.c b/kernel/linux/kni/ethtool/igb/igb_vmdq.c new file mode 100644 index 00000000..cdd807b9 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb_vmdq.c @@ -0,0 +1,421 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + + +#include <linux/tcp.h> + +#include "igb.h" +#include "igb_vmdq.h" +#include <linux/if_vlan.h> + +#ifdef CONFIG_IGB_VMDQ_NETDEV +int igb_vmdq_open(struct net_device *dev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + struct net_device *main_netdev = adapter->netdev; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + if (test_bit(__IGB_DOWN, &adapter->state)) { + DPRINTK(DRV, WARNING, + "Open %s before opening this device.\n", + main_netdev->name); + return -EAGAIN; + } + netif_carrier_off(dev); + vadapter->tx_ring->vmdq_netdev = dev; + vadapter->rx_ring->vmdq_netdev = dev; + if (is_valid_ether_addr(dev->dev_addr)) { + igb_del_mac_filter(adapter, dev->dev_addr, hw_queue); + igb_add_mac_filter(adapter, dev->dev_addr, hw_queue); + } + netif_carrier_on(dev); + return 0; +} + +int igb_vmdq_close(struct net_device *dev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + netif_carrier_off(dev); + igb_del_mac_filter(adapter, dev->dev_addr, hw_queue); + + vadapter->tx_ring->vmdq_netdev = NULL; + vadapter->rx_ring->vmdq_netdev = NULL; + return 0; +} + +netdev_tx_t igb_vmdq_xmit_frame(struct sk_buff *skb, struct net_device *dev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + + return igb_xmit_frame_ring(skb, vadapter->tx_ring); +} + +struct net_device_stats *igb_vmdq_get_stats(struct net_device *dev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + struct e1000_hw *hw = &adapter->hw; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + vadapter->net_stats.rx_packets += + E1000_READ_REG(hw, E1000_PFVFGPRC(hw_queue)); + E1000_WRITE_REG(hw, E1000_PFVFGPRC(hw_queue), 0); + vadapter->net_stats.tx_packets += + E1000_READ_REG(hw, E1000_PFVFGPTC(hw_queue)); + E1000_WRITE_REG(hw, E1000_PFVFGPTC(hw_queue), 0); + vadapter->net_stats.rx_bytes += + E1000_READ_REG(hw, E1000_PFVFGORC(hw_queue)); + E1000_WRITE_REG(hw, E1000_PFVFGORC(hw_queue), 0); + vadapter->net_stats.tx_bytes += + E1000_READ_REG(hw, E1000_PFVFGOTC(hw_queue)); + E1000_WRITE_REG(hw, E1000_PFVFGOTC(hw_queue), 0); + vadapter->net_stats.multicast += + E1000_READ_REG(hw, E1000_PFVFMPRC(hw_queue)); + E1000_WRITE_REG(hw, E1000_PFVFMPRC(hw_queue), 0); + /* only return the current stats */ + return &vadapter->net_stats; +} + +/** + * igb_write_vm_addr_list - write unicast addresses to RAR table + * @netdev: network interface device structure + * + * Writes unicast address list to the RAR table. + * Returns: -ENOMEM on failure/insufficient address space + * 0 on no addresses written + * X on writing X addresses to the RAR table + **/ +static int igb_write_vm_addr_list(struct net_device *netdev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); + struct igb_adapter *adapter = vadapter->real_adapter; + int count = 0; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + /* return ENOMEM indicating insufficient memory for addresses */ + if (netdev_uc_count(netdev) > igb_available_rars(adapter)) + return -ENOMEM; + + if (!netdev_uc_empty(netdev)) { +#ifdef NETDEV_HW_ADDR_T_UNICAST + struct netdev_hw_addr *ha; +#else + struct dev_mc_list *ha; +#endif + netdev_for_each_uc_addr(ha, netdev) { +#ifdef NETDEV_HW_ADDR_T_UNICAST + igb_del_mac_filter(adapter, ha->addr, hw_queue); + igb_add_mac_filter(adapter, ha->addr, hw_queue); +#else + igb_del_mac_filter(adapter, ha->da_addr, hw_queue); + igb_add_mac_filter(adapter, ha->da_addr, hw_queue); +#endif + count++; + } + } + return count; +} + + +#define E1000_VMOLR_UPE 0x20000000 /* Unicast promiscuous mode */ +void igb_vmdq_set_rx_mode(struct net_device *dev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + struct e1000_hw *hw = &adapter->hw; + u32 vmolr, rctl; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + /* Check for Promiscuous and All Multicast modes */ + vmolr = E1000_READ_REG(hw, E1000_VMOLR(hw_queue)); + + /* clear the affected bits */ + vmolr &= ~(E1000_VMOLR_UPE | E1000_VMOLR_MPME | + E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE); + + if (dev->flags & IFF_PROMISC) { + vmolr |= E1000_VMOLR_UPE; + rctl = E1000_READ_REG(hw, E1000_RCTL); + rctl |= E1000_RCTL_UPE; + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + } else { + rctl = E1000_READ_REG(hw, E1000_RCTL); + rctl &= ~E1000_RCTL_UPE; + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + if (dev->flags & IFF_ALLMULTI) { + vmolr |= E1000_VMOLR_MPME; + } else { + /* + * Write addresses to the MTA, if the attempt fails + * then we should just turn on promiscuous mode so + * that we can at least receive multicast traffic + */ + if (igb_write_mc_addr_list(adapter->netdev) != 0) + vmolr |= E1000_VMOLR_ROMPE; + } +#ifdef HAVE_SET_RX_MODE + /* + * Write addresses to available RAR registers, if there is not + * sufficient space to store all the addresses then enable + * unicast promiscuous mode + */ + if (igb_write_vm_addr_list(dev) < 0) + vmolr |= E1000_VMOLR_UPE; +#endif + } + E1000_WRITE_REG(hw, E1000_VMOLR(hw_queue), vmolr); + + return; +} + +int igb_vmdq_set_mac(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + igb_del_mac_filter(adapter, dev->dev_addr, hw_queue); + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + return igb_add_mac_filter(adapter, dev->dev_addr, hw_queue); +} + +int igb_vmdq_change_mtu(struct net_device *dev, int new_mtu) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + + if (adapter->netdev->mtu < new_mtu) { + DPRINTK(PROBE, INFO, + "Set MTU on %s to >= %d " + "before changing MTU on %s\n", + adapter->netdev->name, new_mtu, dev->name); + return -EINVAL; + } + dev->mtu = new_mtu; + return 0; +} + +void igb_vmdq_tx_timeout(struct net_device *dev) +{ + return; +} + +void igb_vmdq_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + struct e1000_hw *hw = &adapter->hw; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + vadapter->vlgrp = grp; + + igb_enable_vlan_tags(adapter); + E1000_WRITE_REG(hw, E1000_VMVIR(hw_queue), 0); + + return; +} +void igb_vmdq_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; +#ifndef HAVE_NETDEV_VLAN_FEATURES + struct net_device *v_netdev; +#endif + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + /* attempt to add filter to vlvf array */ + igb_vlvf_set(adapter, vid, TRUE, hw_queue); + +#ifndef HAVE_NETDEV_VLAN_FEATURES + + /* Copy feature flags from netdev to the vlan netdev for this vid. + * This allows things like TSO to bubble down to our vlan device. + */ + v_netdev = vlan_group_get_device(vadapter->vlgrp, vid); + v_netdev->features |= adapter->netdev->features; + vlan_group_set_device(vadapter->vlgrp, vid, v_netdev); +#endif + + return; +} +void igb_vmdq_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + vlan_group_set_device(vadapter->vlgrp, vid, NULL); + /* remove vlan from VLVF table array */ + igb_vlvf_set(adapter, vid, FALSE, hw_queue); + + + return; +} + +static int igb_vmdq_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); + struct igb_adapter *adapter = vadapter->real_adapter; + struct e1000_hw *hw = &adapter->hw; + u32 status; + + if (hw->phy.media_type == e1000_media_type_copper) { + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full| + SUPPORTED_Autoneg | + SUPPORTED_TP); + ecmd->advertising = ADVERTISED_TP; + + if (hw->mac.autoneg == 1) { + ecmd->advertising |= ADVERTISED_Autoneg; + /* the e1000 autoneg seems to match ethtool nicely */ + ecmd->advertising |= hw->phy.autoneg_advertised; + } + + ecmd->port = PORT_TP; + ecmd->phy_address = hw->phy.addr; + } else { + ecmd->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg); + + ecmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg); + + ecmd->port = PORT_FIBRE; + } + + ecmd->transceiver = XCVR_INTERNAL; + + status = E1000_READ_REG(hw, E1000_STATUS); + + if (status & E1000_STATUS_LU) { + + if ((status & E1000_STATUS_SPEED_1000) || + hw->phy.media_type != e1000_media_type_copper) + ecmd->speed = SPEED_1000; + else if (status & E1000_STATUS_SPEED_100) + ecmd->speed = SPEED_100; + else + ecmd->speed = SPEED_10; + + if ((status & E1000_STATUS_FD) || + hw->phy.media_type != e1000_media_type_copper) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE; + return 0; +} + + +static u32 igb_vmdq_get_msglevel(struct net_device *netdev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); + struct igb_adapter *adapter = vadapter->real_adapter; + return adapter->msg_enable; +} + +static void igb_vmdq_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); + struct igb_adapter *adapter = vadapter->real_adapter; + struct net_device *main_netdev = adapter->netdev; + + strncpy(drvinfo->driver, igb_driver_name, 32); + strncpy(drvinfo->version, igb_driver_version, 32); + + strncpy(drvinfo->fw_version, "N/A", 4); + snprintf(drvinfo->bus_info, 32, "%s VMDQ %d", main_netdev->name, + vadapter->rx_ring->queue_index); + drvinfo->n_stats = 0; + drvinfo->testinfo_len = 0; + drvinfo->regdump_len = 0; +} + +static void igb_vmdq_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); + + struct igb_ring *tx_ring = vadapter->tx_ring; + struct igb_ring *rx_ring = vadapter->rx_ring; + + ring->rx_max_pending = IGB_MAX_RXD; + ring->tx_max_pending = IGB_MAX_TXD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = rx_ring->count; + ring->tx_pending = tx_ring->count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} +static u32 igb_vmdq_get_rx_csum(struct net_device *netdev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); + struct igb_adapter *adapter = vadapter->real_adapter; + + return test_bit(IGB_RING_FLAG_RX_CSUM, &adapter->rx_ring[0]->flags); +} + + +static struct ethtool_ops igb_vmdq_ethtool_ops = { + .get_settings = igb_vmdq_get_settings, + .get_drvinfo = igb_vmdq_get_drvinfo, + .get_link = ethtool_op_get_link, + .get_ringparam = igb_vmdq_get_ringparam, + .get_rx_csum = igb_vmdq_get_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_msglevel = igb_vmdq_get_msglevel, +#ifdef NETIF_F_TSO + .get_tso = ethtool_op_get_tso, +#endif +#ifdef HAVE_ETHTOOL_GET_PERM_ADDR + .get_perm_addr = ethtool_op_get_perm_addr, +#endif +}; + +void igb_vmdq_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &igb_vmdq_ethtool_ops); +} + + +#endif /* CONFIG_IGB_VMDQ_NETDEV */ diff --git a/kernel/linux/kni/ethtool/igb/igb_vmdq.h b/kernel/linux/kni/ethtool/igb/igb_vmdq.h new file mode 100644 index 00000000..e68c48cf --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb_vmdq.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IGB_VMDQ_H_ +#define _IGB_VMDQ_H_ + +#ifdef CONFIG_IGB_VMDQ_NETDEV +int igb_vmdq_open(struct net_device *dev); +int igb_vmdq_close(struct net_device *dev); +netdev_tx_t igb_vmdq_xmit_frame(struct sk_buff *skb, struct net_device *dev); +struct net_device_stats *igb_vmdq_get_stats(struct net_device *dev); +void igb_vmdq_set_rx_mode(struct net_device *dev); +int igb_vmdq_set_mac(struct net_device *dev, void *addr); +int igb_vmdq_change_mtu(struct net_device *dev, int new_mtu); +void igb_vmdq_tx_timeout(struct net_device *dev); +void igb_vmdq_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp); +void igb_vmdq_vlan_rx_add_vid(struct net_device *dev, unsigned short vid); +void igb_vmdq_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid); +void igb_vmdq_set_ethtool_ops(struct net_device *netdev); +#endif /* CONFIG_IGB_VMDQ_NETDEV */ +#endif /* _IGB_VMDQ_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/kcompat.h b/kernel/linux/kni/ethtool/igb/kcompat.h new file mode 100644 index 00000000..ae1b5309 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/kcompat.h @@ -0,0 +1,3945 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _KCOMPAT_H_ +#define _KCOMPAT_H_ + +#ifndef LINUX_VERSION_CODE +#include <linux/version.h> +#else +#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) +#endif +#include <linux/init.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/udp.h> +#include <linux/mii.h> +#include <linux/vmalloc.h> +#include <asm/io.h> +#include <linux/ethtool.h> +#include <linux/if_vlan.h> + +/* NAPI enable/disable flags here */ +#define NAPI + +#define adapter_struct igb_adapter +#define adapter_q_vector igb_q_vector +#define NAPI + +/* and finally set defines so that the code sees the changes */ +#ifdef NAPI +#else +#endif /* NAPI */ + +/* packet split disable/enable */ +#ifdef DISABLE_PACKET_SPLIT +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT +#define CONFIG_IGB_DISABLE_PACKET_SPLIT +#endif +#endif /* DISABLE_PACKET_SPLIT */ + +/* MSI compatibility code for all kernels and drivers */ +#ifdef DISABLE_PCI_MSI +#undef CONFIG_PCI_MSI +#endif +#ifndef CONFIG_PCI_MSI +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) ) +struct msix_entry { + u16 vector; /* kernel uses to write allocated vector */ + u16 entry; /* driver uses to specify entry, OS writes */ +}; +#endif +#undef pci_enable_msi +#define pci_enable_msi(a) -ENOTSUPP +#undef pci_disable_msi +#define pci_disable_msi(a) do {} while (0) +#undef pci_enable_msix +#define pci_enable_msix(a, b, c) -ENOTSUPP +#undef pci_disable_msix +#define pci_disable_msix(a) do {} while (0) +#define msi_remove_pci_irq_vectors(a) do {} while (0) +#endif /* CONFIG_PCI_MSI */ +#ifdef DISABLE_PM +#undef CONFIG_PM +#endif + +#ifdef DISABLE_NET_POLL_CONTROLLER +#undef CONFIG_NET_POLL_CONTROLLER +#endif + +#ifndef PMSG_SUSPEND +#define PMSG_SUSPEND 3 +#endif + +/* generic boolean compatibility */ +#undef TRUE +#undef FALSE +#define TRUE true +#define FALSE false +#ifdef GCC_VERSION +#if ( GCC_VERSION < 3000 ) +#define _Bool char +#endif +#else +#define _Bool char +#endif + +/* kernels less than 2.4.14 don't have this */ +#ifndef ETH_P_8021Q +#define ETH_P_8021Q 0x8100 +#endif + +#ifndef module_param +#define module_param(v,t,p) MODULE_PARM(v, "i"); +#endif + +#ifndef DMA_64BIT_MASK +#define DMA_64BIT_MASK 0xffffffffffffffffULL +#endif + +#ifndef DMA_32BIT_MASK +#define DMA_32BIT_MASK 0x00000000ffffffffULL +#endif + +#ifndef PCI_CAP_ID_EXP +#define PCI_CAP_ID_EXP 0x10 +#endif + +#ifndef PCIE_LINK_STATE_L0S +#define PCIE_LINK_STATE_L0S 1 +#endif +#ifndef PCIE_LINK_STATE_L1 +#define PCIE_LINK_STATE_L1 2 +#endif + +#ifndef mmiowb +#ifdef CONFIG_IA64 +#define mmiowb() asm volatile ("mf.a" ::: "memory") +#else +#define mmiowb() +#endif +#endif + +#ifndef SET_NETDEV_DEV +#define SET_NETDEV_DEV(net, pdev) +#endif + +#if !defined(HAVE_FREE_NETDEV) && ( LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0) ) +#define free_netdev(x) kfree(x) +#endif + +#ifdef HAVE_POLL_CONTROLLER +#define CONFIG_NET_POLL_CONTROLLER +#endif + +#ifndef SKB_DATAREF_SHIFT +/* if we do not have the infrastructure to detect if skb_header is cloned + just return false in all cases */ +#define skb_header_cloned(x) 0 +#endif + +#ifndef NETIF_F_GSO +#define gso_size tso_size +#define gso_segs tso_segs +#endif + +#ifndef NETIF_F_GRO +#define vlan_gro_receive(_napi, _vlgrp, _vlan, _skb) \ + vlan_hwaccel_receive_skb(_skb, _vlgrp, _vlan) +#define napi_gro_receive(_napi, _skb) netif_receive_skb(_skb) +#endif + +#ifndef NETIF_F_SCTP_CSUM +#define NETIF_F_SCTP_CSUM 0 +#endif + +#ifndef NETIF_F_LRO +#define NETIF_F_LRO (1 << 15) +#endif + +#ifndef NETIF_F_NTUPLE +#define NETIF_F_NTUPLE (1 << 27) +#endif + +#ifndef IPPROTO_SCTP +#define IPPROTO_SCTP 132 +#endif + +#ifndef CHECKSUM_PARTIAL +#define CHECKSUM_PARTIAL CHECKSUM_HW +#define CHECKSUM_COMPLETE CHECKSUM_HW +#endif + +#ifndef __read_mostly +#define __read_mostly +#endif + +#ifndef MII_RESV1 +#define MII_RESV1 0x17 /* Reserved... */ +#endif + +#ifndef unlikely +#define unlikely(_x) _x +#define likely(_x) _x +#endif + +#ifndef WARN_ON +#define WARN_ON(x) +#endif + +#ifndef PCI_DEVICE +#define PCI_DEVICE(vend,dev) \ + .vendor = (vend), .device = (dev), \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID +#endif + +#ifndef node_online +#define node_online(node) ((node) == 0) +#endif + +#ifndef num_online_cpus +#define num_online_cpus() smp_num_cpus +#endif + +#ifndef cpu_online +#define cpu_online(cpuid) test_bit((cpuid), &cpu_online_map) +#endif + +#ifndef _LINUX_RANDOM_H +#include <linux/random.h> +#endif + +#ifndef DECLARE_BITMAP +#ifndef BITS_TO_LONGS +#define BITS_TO_LONGS(bits) (((bits)+BITS_PER_LONG-1)/BITS_PER_LONG) +#endif +#define DECLARE_BITMAP(name,bits) long name[BITS_TO_LONGS(bits)] +#endif + +#ifndef VLAN_HLEN +#define VLAN_HLEN 4 +#endif + +#ifndef VLAN_ETH_HLEN +#define VLAN_ETH_HLEN 18 +#endif + +#ifndef VLAN_ETH_FRAME_LEN +#define VLAN_ETH_FRAME_LEN 1518 +#endif + +#if !defined(IXGBE_DCA) && !defined(IGB_DCA) +#define dca_get_tag(b) 0 +#define dca_add_requester(a) -1 +#define dca_remove_requester(b) do { } while(0) +#define DCA_PROVIDER_ADD 0x0001 +#define DCA_PROVIDER_REMOVE 0x0002 +#endif + +#ifndef DCA_GET_TAG_TWO_ARGS +#define dca3_get_tag(a,b) dca_get_tag(b) +#endif + +#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +#if defined(__i386__) || defined(__x86_64__) +#define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +#endif +#endif + +/* taken from 2.6.24 definition in linux/kernel.h */ +#ifndef IS_ALIGNED +#define IS_ALIGNED(x,a) (((x) % ((typeof(x))(a))) == 0) +#endif + +#ifdef IS_ENABLED +#undef IS_ENABLED +#undef __ARG_PLACEHOLDER_1 +#undef config_enabled +#undef _config_enabled +#undef __config_enabled +#undef ___config_enabled +#endif + +#define __ARG_PLACEHOLDER_1 0, +#define config_enabled(cfg) _config_enabled(cfg) +#define _config_enabled(value) __config_enabled(__ARG_PLACEHOLDER_##value) +#define __config_enabled(arg1_or_junk) ___config_enabled(arg1_or_junk 1, 0) +#define ___config_enabled(__ignored, val, ...) val + +#define IS_ENABLED(option) \ + (config_enabled(option) || config_enabled(option##_MODULE)) + +#if !defined(NETIF_F_HW_VLAN_TX) && !defined(NETIF_F_HW_VLAN_CTAG_TX) +struct _kc_vlan_ethhdr { + unsigned char h_dest[ETH_ALEN]; + unsigned char h_source[ETH_ALEN]; + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + __be16 h_vlan_encapsulated_proto; +}; +#define vlan_ethhdr _kc_vlan_ethhdr +struct _kc_vlan_hdr { + __be16 h_vlan_TCI; + __be16 h_vlan_encapsulated_proto; +}; +#define vlan_hdr _kc_vlan_hdr +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ) +#define vlan_tx_tag_present(_skb) 0 +#define vlan_tx_tag_get(_skb) 0 +#endif +#endif /* NETIF_F_HW_VLAN_TX && NETIF_F_HW_VLAN_CTAG_TX */ + +#ifndef VLAN_PRIO_SHIFT +#define VLAN_PRIO_SHIFT 13 +#endif + + +#ifndef __GFP_COLD +#define __GFP_COLD 0 +#endif + +#ifndef __GFP_COMP +#define __GFP_COMP 0 +#endif + +/*****************************************************************************/ +/* Installations with ethtool version without eeprom, adapter id, or statistics + * support */ + +#ifndef ETH_GSTRING_LEN +#define ETH_GSTRING_LEN 32 +#endif + +#ifndef ETHTOOL_GSTATS +#define ETHTOOL_GSTATS 0x1d +#undef ethtool_drvinfo +#define ethtool_drvinfo k_ethtool_drvinfo +struct k_ethtool_drvinfo { + u32 cmd; + char driver[32]; + char version[32]; + char fw_version[32]; + char bus_info[32]; + char reserved1[32]; + char reserved2[16]; + u32 n_stats; + u32 testinfo_len; + u32 eedump_len; + u32 regdump_len; +}; + +struct ethtool_stats { + u32 cmd; + u32 n_stats; + u64 data[0]; +}; +#endif /* ETHTOOL_GSTATS */ + +#ifndef ETHTOOL_PHYS_ID +#define ETHTOOL_PHYS_ID 0x1c +#endif /* ETHTOOL_PHYS_ID */ + +#ifndef ETHTOOL_GSTRINGS +#define ETHTOOL_GSTRINGS 0x1b +enum ethtool_stringset { + ETH_SS_TEST = 0, + ETH_SS_STATS, +}; +struct ethtool_gstrings { + u32 cmd; /* ETHTOOL_GSTRINGS */ + u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ + u32 len; /* number of strings in the string set */ + u8 data[0]; +}; +#endif /* ETHTOOL_GSTRINGS */ + +#ifndef ETHTOOL_TEST +#define ETHTOOL_TEST 0x1a +enum ethtool_test_flags { + ETH_TEST_FL_OFFLINE = (1 << 0), + ETH_TEST_FL_FAILED = (1 << 1), +}; +struct ethtool_test { + u32 cmd; + u32 flags; + u32 reserved; + u32 len; + u64 data[0]; +}; +#endif /* ETHTOOL_TEST */ + +#ifndef ETHTOOL_GEEPROM +#define ETHTOOL_GEEPROM 0xb +#undef ETHTOOL_GREGS +struct ethtool_eeprom { + u32 cmd; + u32 magic; + u32 offset; + u32 len; + u8 data[0]; +}; + +struct ethtool_value { + u32 cmd; + u32 data; +}; +#endif /* ETHTOOL_GEEPROM */ + +#ifndef ETHTOOL_GLINK +#define ETHTOOL_GLINK 0xa +#endif /* ETHTOOL_GLINK */ + +#ifndef ETHTOOL_GWOL +#define ETHTOOL_GWOL 0x5 +#define ETHTOOL_SWOL 0x6 +#define SOPASS_MAX 6 +struct ethtool_wolinfo { + u32 cmd; + u32 supported; + u32 wolopts; + u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ +}; +#endif /* ETHTOOL_GWOL */ + +#ifndef ETHTOOL_GREGS +#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers */ +#define ethtool_regs _kc_ethtool_regs +/* for passing big chunks of data */ +struct _kc_ethtool_regs { + u32 cmd; + u32 version; /* driver-specific, indicates different chips/revs */ + u32 len; /* bytes */ + u8 data[0]; +}; +#endif /* ETHTOOL_GREGS */ + +#ifndef ETHTOOL_GMSGLVL +#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ +#endif +#ifndef ETHTOOL_SMSGLVL +#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level, priv. */ +#endif +#ifndef ETHTOOL_NWAY_RST +#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation, priv */ +#endif +#ifndef ETHTOOL_GLINK +#define ETHTOOL_GLINK 0x0000000a /* Get link status */ +#endif +#ifndef ETHTOOL_GEEPROM +#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ +#endif +#ifndef ETHTOOL_SEEPROM +#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data */ +#endif +#ifndef ETHTOOL_GCOALESCE +#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ +/* for configuring coalescing parameters of chip */ +#define ethtool_coalesce _kc_ethtool_coalesce +struct _kc_ethtool_coalesce { + u32 cmd; /* ETHTOOL_{G,S}COALESCE */ + + /* How many usecs to delay an RX interrupt after + * a packet arrives. If 0, only rx_max_coalesced_frames + * is used. + */ + u32 rx_coalesce_usecs; + + /* How many packets to delay an RX interrupt after + * a packet arrives. If 0, only rx_coalesce_usecs is + * used. It is illegal to set both usecs and max frames + * to zero as this would cause RX interrupts to never be + * generated. + */ + u32 rx_max_coalesced_frames; + + /* Same as above two parameters, except that these values + * apply while an IRQ is being serviced by the host. Not + * all cards support this feature and the values are ignored + * in that case. + */ + u32 rx_coalesce_usecs_irq; + u32 rx_max_coalesced_frames_irq; + + /* How many usecs to delay a TX interrupt after + * a packet is sent. If 0, only tx_max_coalesced_frames + * is used. + */ + u32 tx_coalesce_usecs; + + /* How many packets to delay a TX interrupt after + * a packet is sent. If 0, only tx_coalesce_usecs is + * used. It is illegal to set both usecs and max frames + * to zero as this would cause TX interrupts to never be + * generated. + */ + u32 tx_max_coalesced_frames; + + /* Same as above two parameters, except that these values + * apply while an IRQ is being serviced by the host. Not + * all cards support this feature and the values are ignored + * in that case. + */ + u32 tx_coalesce_usecs_irq; + u32 tx_max_coalesced_frames_irq; + + /* How many usecs to delay in-memory statistics + * block updates. Some drivers do not have an in-memory + * statistic block, and in such cases this value is ignored. + * This value must not be zero. + */ + u32 stats_block_coalesce_usecs; + + /* Adaptive RX/TX coalescing is an algorithm implemented by + * some drivers to improve latency under low packet rates and + * improve throughput under high packet rates. Some drivers + * only implement one of RX or TX adaptive coalescing. Anything + * not implemented by the driver causes these values to be + * silently ignored. + */ + u32 use_adaptive_rx_coalesce; + u32 use_adaptive_tx_coalesce; + + /* When the packet rate (measured in packets per second) + * is below pkt_rate_low, the {rx,tx}_*_low parameters are + * used. + */ + u32 pkt_rate_low; + u32 rx_coalesce_usecs_low; + u32 rx_max_coalesced_frames_low; + u32 tx_coalesce_usecs_low; + u32 tx_max_coalesced_frames_low; + + /* When the packet rate is below pkt_rate_high but above + * pkt_rate_low (both measured in packets per second) the + * normal {rx,tx}_* coalescing parameters are used. + */ + + /* When the packet rate is (measured in packets per second) + * is above pkt_rate_high, the {rx,tx}_*_high parameters are + * used. + */ + u32 pkt_rate_high; + u32 rx_coalesce_usecs_high; + u32 rx_max_coalesced_frames_high; + u32 tx_coalesce_usecs_high; + u32 tx_max_coalesced_frames_high; + + /* How often to do adaptive coalescing packet rate sampling, + * measured in seconds. Must not be zero. + */ + u32 rate_sample_interval; +}; +#endif /* ETHTOOL_GCOALESCE */ + +#ifndef ETHTOOL_SCOALESCE +#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ +#endif +#ifndef ETHTOOL_GRINGPARAM +#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ +/* for configuring RX/TX ring parameters */ +#define ethtool_ringparam _kc_ethtool_ringparam +struct _kc_ethtool_ringparam { + u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ + + /* Read only attributes. These indicate the maximum number + * of pending RX/TX ring entries the driver will allow the + * user to set. + */ + u32 rx_max_pending; + u32 rx_mini_max_pending; + u32 rx_jumbo_max_pending; + u32 tx_max_pending; + + /* Values changeable by the user. The valid values are + * in the range 1 to the "*_max_pending" counterpart above. + */ + u32 rx_pending; + u32 rx_mini_pending; + u32 rx_jumbo_pending; + u32 tx_pending; +}; +#endif /* ETHTOOL_GRINGPARAM */ + +#ifndef ETHTOOL_SRINGPARAM +#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters, priv. */ +#endif +#ifndef ETHTOOL_GPAUSEPARAM +#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ +/* for configuring link flow control parameters */ +#define ethtool_pauseparam _kc_ethtool_pauseparam +struct _kc_ethtool_pauseparam { + u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ + + /* If the link is being auto-negotiated (via ethtool_cmd.autoneg + * being true) the user may set 'autoneg' here non-zero to have the + * pause parameters be auto-negotiated too. In such a case, the + * {rx,tx}_pause values below determine what capabilities are + * advertised. + * + * If 'autoneg' is zero or the link is not being auto-negotiated, + * then {rx,tx}_pause force the driver to use/not-use pause + * flow control. + */ + u32 autoneg; + u32 rx_pause; + u32 tx_pause; +}; +#endif /* ETHTOOL_GPAUSEPARAM */ + +#ifndef ETHTOOL_SPAUSEPARAM +#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ +#endif +#ifndef ETHTOOL_GRXCSUM +#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_SRXCSUM +#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_GTXCSUM +#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_STXCSUM +#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_GSG +#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable + * (ethtool_value) */ +#endif +#ifndef ETHTOOL_SSG +#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable + * (ethtool_value). */ +#endif +#ifndef ETHTOOL_TEST +#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test, priv. */ +#endif +#ifndef ETHTOOL_GSTRINGS +#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ +#endif +#ifndef ETHTOOL_PHYS_ID +#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ +#endif +#ifndef ETHTOOL_GSTATS +#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ +#endif +#ifndef ETHTOOL_GTSO +#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_STSO +#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ +#endif + +#ifndef ETHTOOL_BUSINFO_LEN +#define ETHTOOL_BUSINFO_LEN 32 +#endif + +#ifndef RHEL_RELEASE_VERSION +#define RHEL_RELEASE_VERSION(a,b) (((a) << 8) + (b)) +#endif +#ifndef AX_RELEASE_VERSION +#define AX_RELEASE_VERSION(a,b) (((a) << 8) + (b)) +#endif + +#ifndef AX_RELEASE_CODE +#define AX_RELEASE_CODE 0 +#endif + +#if (AX_RELEASE_CODE && AX_RELEASE_CODE == AX_RELEASE_VERSION(3,0)) +#define RHEL_RELEASE_CODE RHEL_RELEASE_VERSION(5,0) +#elif (AX_RELEASE_CODE && AX_RELEASE_CODE == AX_RELEASE_VERSION(3,1)) +#define RHEL_RELEASE_CODE RHEL_RELEASE_VERSION(5,1) +#elif (AX_RELEASE_CODE && AX_RELEASE_CODE == AX_RELEASE_VERSION(3,2)) +#define RHEL_RELEASE_CODE RHEL_RELEASE_VERSION(5,3) +#endif + +#ifndef RHEL_RELEASE_CODE +/* NOTE: RHEL_RELEASE_* introduced in RHEL4.5 */ +#define RHEL_RELEASE_CODE 0 +#endif + +/* SuSE version macro is the same as Linux kernel version */ +#ifndef SLE_VERSION +#define SLE_VERSION(a,b,c) KERNEL_VERSION(a,b,c) +#endif +#ifdef CONFIG_SUSE_KERNEL +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 4, 57)) +/* SLES12SP3 is at least 4.4.57+ based */ +#define SLE_VERSION_CODE SLE_VERSION(12, 3, 0) +#elif ( LINUX_VERSION_CODE >= KERNEL_VERSION(3,12,28) ) +/* SLES12 is at least 3.12.28+ based */ +#define SLE_VERSION_CODE SLE_VERSION(12,0,0) +#elif ((LINUX_VERSION_CODE >= KERNEL_VERSION(3,0,61)) && \ + (LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0))) +/* SLES11 SP3 is at least 3.0.61+ based */ +#define SLE_VERSION_CODE SLE_VERSION(11,3,0) +#elif ( LINUX_VERSION_CODE == KERNEL_VERSION(2,6,32) ) +/* SLES11 SP1 is 2.6.32 based */ +#define SLE_VERSION_CODE SLE_VERSION(11,1,0) +#elif ( LINUX_VERSION_CODE == KERNEL_VERSION(2,6,27) ) +/* SLES11 GA is 2.6.27 based */ +#define SLE_VERSION_CODE SLE_VERSION(11,0,0) +#endif /* LINUX_VERSION_CODE == KERNEL_VERSION(x,y,z) */ +#endif /* CONFIG_SUSE_KERNEL */ +#ifndef SLE_VERSION_CODE +#define SLE_VERSION_CODE 0 +#endif /* SLE_VERSION_CODE */ + +/* Ubuntu release and kernel codes must be specified from Makefile */ +#ifndef UBUNTU_RELEASE_VERSION +#define UBUNTU_RELEASE_VERSION(a,b) (((a) * 100) + (b)) +#endif +#ifndef UBUNTU_KERNEL_VERSION +#define UBUNTU_KERNEL_VERSION(a,b,c,abi,upload) (((a) << 40) + ((b) << 32) + ((c) << 24) + ((abi) << 8) + (upload)) +#endif +#ifndef UBUNTU_RELEASE_CODE +#define UBUNTU_RELEASE_CODE 0 +#endif +#ifndef UBUNTU_KERNEL_CODE +#define UBUNTU_KERNEL_CODE 0 +#endif + +#ifdef __KLOCWORK__ +#ifdef ARRAY_SIZE +#undef ARRAY_SIZE +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) +#endif +#endif /* __KLOCWORK__ */ + +/*****************************************************************************/ +/* 2.4.3 => 2.4.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3) ) + +/**************************************/ +/* PCI DRIVER API */ + +#ifndef pci_set_dma_mask +#define pci_set_dma_mask _kc_pci_set_dma_mask +extern int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask); +#endif + +#ifndef pci_request_regions +#define pci_request_regions _kc_pci_request_regions +extern int _kc_pci_request_regions(struct pci_dev *pdev, char *res_name); +#endif + +#ifndef pci_release_regions +#define pci_release_regions _kc_pci_release_regions +extern void _kc_pci_release_regions(struct pci_dev *pdev); +#endif + +/**************************************/ +/* NETWORK DRIVER API */ + +#ifndef alloc_etherdev +#define alloc_etherdev _kc_alloc_etherdev +extern struct net_device * _kc_alloc_etherdev(int sizeof_priv); +#endif + +#ifndef is_valid_ether_addr +#define is_valid_ether_addr _kc_is_valid_ether_addr +extern int _kc_is_valid_ether_addr(u8 *addr); +#endif + +/**************************************/ +/* MISCELLANEOUS */ + +#ifndef INIT_TQUEUE +#define INIT_TQUEUE(_tq, _routine, _data) \ + do { \ + INIT_LIST_HEAD(&(_tq)->list); \ + (_tq)->sync = 0; \ + (_tq)->routine = _routine; \ + (_tq)->data = _data; \ + } while (0) +#endif + +#endif /* 2.4.3 => 2.4.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) ) +/* Generic MII registers. */ +#define MII_BMCR 0x00 /* Basic mode control register */ +#define MII_BMSR 0x01 /* Basic mode status register */ +#define MII_PHYSID1 0x02 /* PHYS ID 1 */ +#define MII_PHYSID2 0x03 /* PHYS ID 2 */ +#define MII_ADVERTISE 0x04 /* Advertisement control reg */ +#define MII_LPA 0x05 /* Link partner ability reg */ +#define MII_EXPANSION 0x06 /* Expansion register */ +/* Basic mode control register. */ +#define BMCR_FULLDPLX 0x0100 /* Full duplex */ +#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ +/* Basic mode status register. */ +#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ +#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ +#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ +#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ +#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ +#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ +/* Advertisement control register. */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL) +/* Expansion register for auto-negotiation. */ +#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ +#endif + +/*****************************************************************************/ +/* 2.4.6 => 2.4.3 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6) ) + +#ifndef pci_set_power_state +#define pci_set_power_state _kc_pci_set_power_state +extern int _kc_pci_set_power_state(struct pci_dev *dev, int state); +#endif + +#ifndef pci_enable_wake +#define pci_enable_wake _kc_pci_enable_wake +extern int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable); +#endif + +#ifndef pci_disable_device +#define pci_disable_device _kc_pci_disable_device +extern void _kc_pci_disable_device(struct pci_dev *pdev); +#endif + +/* PCI PM entry point syntax changed, so don't support suspend/resume */ +#undef CONFIG_PM + +#endif /* 2.4.6 => 2.4.3 */ + +#ifndef HAVE_PCI_SET_MWI +#define pci_set_mwi(X) pci_write_config_word(X, \ + PCI_COMMAND, adapter->hw.bus.pci_cmd_word | \ + PCI_COMMAND_INVALIDATE); +#define pci_clear_mwi(X) pci_write_config_word(X, \ + PCI_COMMAND, adapter->hw.bus.pci_cmd_word & \ + ~PCI_COMMAND_INVALIDATE); +#endif + +/*****************************************************************************/ +/* 2.4.10 => 2.4.9 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,10) ) + +/**************************************/ +/* MODULE API */ + +#ifndef MODULE_LICENSE + #define MODULE_LICENSE(X) +#endif + +/**************************************/ +/* OTHER */ + +#undef min +#define min(x,y) ({ \ + const typeof(x) _x = (x); \ + const typeof(y) _y = (y); \ + (void) (&_x == &_y); \ + _x < _y ? _x : _y; }) + +#undef max +#define max(x,y) ({ \ + const typeof(x) _x = (x); \ + const typeof(y) _y = (y); \ + (void) (&_x == &_y); \ + _x > _y ? _x : _y; }) + +#define min_t(type,x,y) ({ \ + type _x = (x); \ + type _y = (y); \ + _x < _y ? _x : _y; }) + +#define max_t(type,x,y) ({ \ + type _x = (x); \ + type _y = (y); \ + _x > _y ? _x : _y; }) + +#ifndef list_for_each_safe +#define list_for_each_safe(pos, n, head) \ + for (pos = (head)->next, n = pos->next; pos != (head); \ + pos = n, n = pos->next) +#endif + +#ifndef ____cacheline_aligned_in_smp +#ifdef CONFIG_SMP +#define ____cacheline_aligned_in_smp ____cacheline_aligned +#else +#define ____cacheline_aligned_in_smp +#endif /* CONFIG_SMP */ +#endif + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) ) +extern int _kc_snprintf(char * buf, size_t size, const char *fmt, ...); +#define snprintf(buf, size, fmt, args...) _kc_snprintf(buf, size, fmt, ##args) +extern int _kc_vsnprintf(char *buf, size_t size, const char *fmt, va_list args); +#define vsnprintf(buf, size, fmt, args) _kc_vsnprintf(buf, size, fmt, args) +#else /* 2.4.8 => 2.4.9 */ +extern int snprintf(char * buf, size_t size, const char *fmt, ...); +extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args); +#endif +#endif /* 2.4.10 -> 2.4.6 */ + + +/*****************************************************************************/ +/* 2.4.12 => 2.4.10 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,12) ) +#ifndef HAVE_NETIF_MSG +#define HAVE_NETIF_MSG 1 +enum { + NETIF_MSG_DRV = 0x0001, + NETIF_MSG_PROBE = 0x0002, + NETIF_MSG_LINK = 0x0004, + NETIF_MSG_TIMER = 0x0008, + NETIF_MSG_IFDOWN = 0x0010, + NETIF_MSG_IFUP = 0x0020, + NETIF_MSG_RX_ERR = 0x0040, + NETIF_MSG_TX_ERR = 0x0080, + NETIF_MSG_TX_QUEUED = 0x0100, + NETIF_MSG_INTR = 0x0200, + NETIF_MSG_TX_DONE = 0x0400, + NETIF_MSG_RX_STATUS = 0x0800, + NETIF_MSG_PKTDATA = 0x1000, + NETIF_MSG_HW = 0x2000, + NETIF_MSG_WOL = 0x4000, +}; + +#define netif_msg_drv(p) ((p)->msg_enable & NETIF_MSG_DRV) +#define netif_msg_probe(p) ((p)->msg_enable & NETIF_MSG_PROBE) +#define netif_msg_link(p) ((p)->msg_enable & NETIF_MSG_LINK) +#define netif_msg_timer(p) ((p)->msg_enable & NETIF_MSG_TIMER) +#define netif_msg_ifdown(p) ((p)->msg_enable & NETIF_MSG_IFDOWN) +#define netif_msg_ifup(p) ((p)->msg_enable & NETIF_MSG_IFUP) +#define netif_msg_rx_err(p) ((p)->msg_enable & NETIF_MSG_RX_ERR) +#define netif_msg_tx_err(p) ((p)->msg_enable & NETIF_MSG_TX_ERR) +#define netif_msg_tx_queued(p) ((p)->msg_enable & NETIF_MSG_TX_QUEUED) +#define netif_msg_intr(p) ((p)->msg_enable & NETIF_MSG_INTR) +#define netif_msg_tx_done(p) ((p)->msg_enable & NETIF_MSG_TX_DONE) +#define netif_msg_rx_status(p) ((p)->msg_enable & NETIF_MSG_RX_STATUS) +#define netif_msg_pktdata(p) ((p)->msg_enable & NETIF_MSG_PKTDATA) +#endif /* !HAVE_NETIF_MSG */ +#endif /* 2.4.12 => 2.4.10 */ + +/*****************************************************************************/ +/* 2.4.13 => 2.4.12 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,13) ) + +/**************************************/ +/* PCI DMA MAPPING */ + +#ifndef virt_to_page + #define virt_to_page(v) (mem_map + (virt_to_phys(v) >> PAGE_SHIFT)) +#endif + +#ifndef pci_map_page +#define pci_map_page _kc_pci_map_page +extern u64 _kc_pci_map_page(struct pci_dev *dev, struct page *page, unsigned long offset, size_t size, int direction); +#endif + +#ifndef pci_unmap_page +#define pci_unmap_page _kc_pci_unmap_page +extern void _kc_pci_unmap_page(struct pci_dev *dev, u64 dma_addr, size_t size, int direction); +#endif + +/* pci_set_dma_mask takes dma_addr_t, which is only 32-bits prior to 2.4.13 */ + +#undef DMA_32BIT_MASK +#define DMA_32BIT_MASK 0xffffffff +#undef DMA_64BIT_MASK +#define DMA_64BIT_MASK 0xffffffff + +/**************************************/ +/* OTHER */ + +#ifndef cpu_relax +#define cpu_relax() rep_nop() +#endif + +struct vlan_ethhdr { + unsigned char h_dest[ETH_ALEN]; + unsigned char h_source[ETH_ALEN]; + unsigned short h_vlan_proto; + unsigned short h_vlan_TCI; + unsigned short h_vlan_encapsulated_proto; +}; +#endif /* 2.4.13 => 2.4.12 */ + +/*****************************************************************************/ +/* 2.4.17 => 2.4.12 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17) ) + +#ifndef __devexit_p + #define __devexit_p(x) &(x) +#endif + +#else + /* For Kernel 3.8 these are not defined - so undefine all */ + #undef __devexit_p + #undef __devexit + #undef __devinit + #undef __devinitdata + #define __devexit_p(x) &(x) + #define __devexit + #define __devinit + #define __devinitdata + +#endif /* 2.4.17 => 2.4.13 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,18) ) +#define NETIF_MSG_HW 0x2000 +#define NETIF_MSG_WOL 0x4000 + +#ifndef netif_msg_hw +#define netif_msg_hw(p) ((p)->msg_enable & NETIF_MSG_HW) +#endif +#ifndef netif_msg_wol +#define netif_msg_wol(p) ((p)->msg_enable & NETIF_MSG_WOL) +#endif +#endif /* 2.4.18 */ + +/*****************************************************************************/ + +/*****************************************************************************/ +/* 2.4.20 => 2.4.19 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,20) ) + +/* we won't support NAPI on less than 2.4.20 */ +#ifdef NAPI +#undef NAPI +#endif + +#endif /* 2.4.20 => 2.4.19 */ + +/*****************************************************************************/ +/* 2.4.22 => 2.4.17 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) ) +#define pci_name(x) ((x)->slot_name) + +#ifndef SUPPORTED_10000baseT_Full +#define SUPPORTED_10000baseT_Full (1 << 12) +#endif +#ifndef ADVERTISED_10000baseT_Full +#define ADVERTISED_10000baseT_Full (1 << 12) +#endif +#endif + +/*****************************************************************************/ +/* 2.4.22 => 2.4.17 */ + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) ) +#ifndef IGB_NO_LRO +#define IGB_NO_LRO +#endif +#endif + +/*****************************************************************************/ +/*****************************************************************************/ +/* 2.4.23 => 2.4.22 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) ) +/*****************************************************************************/ +#ifdef NAPI +#ifndef netif_poll_disable +#define netif_poll_disable(x) _kc_netif_poll_disable(x) +static inline void _kc_netif_poll_disable(struct net_device *netdev) +{ + while (test_and_set_bit(__LINK_STATE_RX_SCHED, &netdev->state)) { + /* No hurry */ + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(1); + } +} +#endif +#ifndef netif_poll_enable +#define netif_poll_enable(x) _kc_netif_poll_enable(x) +static inline void _kc_netif_poll_enable(struct net_device *netdev) +{ + clear_bit(__LINK_STATE_RX_SCHED, &netdev->state); +} +#endif +#endif /* NAPI */ +#ifndef netif_tx_disable +#define netif_tx_disable(x) _kc_netif_tx_disable(x) +static inline void _kc_netif_tx_disable(struct net_device *dev) +{ + spin_lock_bh(&dev->xmit_lock); + netif_stop_queue(dev); + spin_unlock_bh(&dev->xmit_lock); +} +#endif +#else /* 2.4.23 => 2.4.22 */ +#define HAVE_SCTP +#endif /* 2.4.23 => 2.4.22 */ + +/*****************************************************************************/ +/* 2.6.4 => 2.6.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,25) || \ + ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && \ + LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) ) +#define ETHTOOL_OPS_COMPAT +#endif /* 2.6.4 => 2.6.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) ) +#define __user +#endif /* < 2.4.27 */ + +/*****************************************************************************/ +/* 2.5.71 => 2.4.x */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,71) ) +#define sk_protocol protocol +#define pci_get_device pci_find_device +#endif /* 2.5.70 => 2.4.x */ + +/*****************************************************************************/ +/* < 2.4.27 or 2.6.0 <= 2.6.5 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) || \ + ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && \ + LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) ) ) + +#ifndef netif_msg_init +#define netif_msg_init _kc_netif_msg_init +static inline u32 _kc_netif_msg_init(int debug_value, int default_msg_enable_bits) +{ + /* use default */ + if (debug_value < 0 || debug_value >= (sizeof(u32) * 8)) + return default_msg_enable_bits; + if (debug_value == 0) /* no output */ + return 0; + /* set low N bits */ + return (1 << debug_value) -1; +} +#endif + +#endif /* < 2.4.27 or 2.6.0 <= 2.6.5 */ +/*****************************************************************************/ +#if (( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) ) || \ + (( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) && \ + ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,3) ))) +#define netdev_priv(x) x->priv +#endif + +/*****************************************************************************/ +/* <= 2.5.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) ) +#include <linux/rtnetlink.h> +#undef pci_register_driver +#define pci_register_driver pci_module_init + +/* + * Most of the dma compat code is copied/modified from the 2.4.37 + * /include/linux/libata-compat.h header file + */ +/* These definitions mirror those in pci.h, so they can be used + * interchangeably with their PCI_ counterparts */ +enum dma_data_direction { + DMA_BIDIRECTIONAL = 0, + DMA_TO_DEVICE = 1, + DMA_FROM_DEVICE = 2, + DMA_NONE = 3, +}; + +struct device { + struct pci_dev pdev; +}; + +static inline struct pci_dev *to_pci_dev (struct device *dev) +{ + return (struct pci_dev *) dev; +} +static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) +{ + return (struct device *) pdev; +} + +#define pdev_printk(lvl, pdev, fmt, args...) \ + printk("%s %s: " fmt, lvl, pci_name(pdev), ## args) +#define dev_err(dev, fmt, args...) \ + pdev_printk(KERN_ERR, to_pci_dev(dev), fmt, ## args) +#define dev_info(dev, fmt, args...) \ + pdev_printk(KERN_INFO, to_pci_dev(dev), fmt, ## args) +#define dev_warn(dev, fmt, args...) \ + pdev_printk(KERN_WARNING, to_pci_dev(dev), fmt, ## args) +#define dev_notice(dev, fmt, args...) \ + pdev_printk(KERN_NOTICE, to_pci_dev(dev), fmt, ## args) +#define dev_dbg(dev, fmt, args...) \ + pdev_printk(KERN_DEBUG, to_pci_dev(dev), fmt, ## args) + +/* NOTE: dangerous! we ignore the 'gfp' argument */ +#define dma_alloc_coherent(dev,sz,dma,gfp) \ + pci_alloc_consistent(to_pci_dev(dev),(sz),(dma)) +#define dma_free_coherent(dev,sz,addr,dma_addr) \ + pci_free_consistent(to_pci_dev(dev),(sz),(addr),(dma_addr)) + +#define dma_map_page(dev,a,b,c,d) \ + pci_map_page(to_pci_dev(dev),(a),(b),(c),(d)) +#define dma_unmap_page(dev,a,b,c) \ + pci_unmap_page(to_pci_dev(dev),(a),(b),(c)) + +#define dma_map_single(dev,a,b,c) \ + pci_map_single(to_pci_dev(dev),(a),(b),(c)) +#define dma_unmap_single(dev,a,b,c) \ + pci_unmap_single(to_pci_dev(dev),(a),(b),(c)) + +#define dma_map_sg(dev, sg, nents, dir) \ + pci_map_sg(to_pci_dev(dev), (sg), (nents), (dir) +#define dma_unmap_sg(dev, sg, nents, dir) \ + pci_unmap_sg(to_pci_dev(dev), (sg), (nents), (dir) + +#define dma_sync_single(dev,a,b,c) \ + pci_dma_sync_single(to_pci_dev(dev),(a),(b),(c)) + +/* for range just sync everything, that's all the pci API can do */ +#define dma_sync_single_range(dev,addr,off,sz,dir) \ + pci_dma_sync_single(to_pci_dev(dev),(addr),(off)+(sz),(dir)) + +#define dma_set_mask(dev,mask) \ + pci_set_dma_mask(to_pci_dev(dev),(mask)) + +/* hlist_* code - double linked lists */ +struct hlist_head { + struct hlist_node *first; +}; + +struct hlist_node { + struct hlist_node *next, **pprev; +}; + +static inline void __hlist_del(struct hlist_node *n) +{ + struct hlist_node *next = n->next; + struct hlist_node **pprev = n->pprev; + *pprev = next; + if (next) + next->pprev = pprev; +} + +static inline void hlist_del(struct hlist_node *n) +{ + __hlist_del(n); + n->next = NULL; + n->pprev = NULL; +} + +static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h) +{ + struct hlist_node *first = h->first; + n->next = first; + if (first) + first->pprev = &n->next; + h->first = n; + n->pprev = &h->first; +} + +static inline int hlist_empty(const struct hlist_head *h) +{ + return !h->first; +} +#define HLIST_HEAD_INIT { .first = NULL } +#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL } +#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL) +static inline void INIT_HLIST_NODE(struct hlist_node *h) +{ + h->next = NULL; + h->pprev = NULL; +} + +#ifndef might_sleep +#define might_sleep() +#endif +#else +static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) +{ + return &pdev->dev; +} +#endif /* <= 2.5.0 */ + +/*****************************************************************************/ +/* 2.5.28 => 2.4.23 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28) ) + +#include <linux/tqueue.h> +#define work_struct tq_struct +#undef INIT_WORK +#define INIT_WORK(a,b) INIT_TQUEUE(a,(void (*)(void *))b,a) +#undef container_of +#define container_of list_entry +#define schedule_work schedule_task +#define flush_scheduled_work flush_scheduled_tasks +#define cancel_work_sync(x) flush_scheduled_work() + +#endif /* 2.5.28 => 2.4.17 */ + +/*****************************************************************************/ +/* 2.6.0 => 2.5.28 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) +#ifndef read_barrier_depends +#define read_barrier_depends() rmb() +#endif + +#undef get_cpu +#define get_cpu() smp_processor_id() +#undef put_cpu +#define put_cpu() do { } while(0) +#define MODULE_INFO(version, _version) +#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT +#define CONFIG_E1000_DISABLE_PACKET_SPLIT 1 +#endif +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT +#define CONFIG_IGB_DISABLE_PACKET_SPLIT 1 +#endif + +#define dma_set_coherent_mask(dev,mask) 1 + +#undef dev_put +#define dev_put(dev) __dev_put(dev) + +#ifndef skb_fill_page_desc +#define skb_fill_page_desc _kc_skb_fill_page_desc +extern void _kc_skb_fill_page_desc(struct sk_buff *skb, int i, struct page *page, int off, int size); +#endif + +#undef ALIGN +#define ALIGN(x,a) (((x)+(a)-1)&~((a)-1)) + +#ifndef page_count +#define page_count(p) atomic_read(&(p)->count) +#endif + +#ifdef MAX_NUMNODES +#undef MAX_NUMNODES +#endif +#define MAX_NUMNODES 1 + +/* find_first_bit and find_next bit are not defined for most + * 2.4 kernels (except for the redhat 2.4.21 kernels + */ +#include <linux/bitops.h> +#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) +#undef find_next_bit +#define find_next_bit _kc_find_next_bit +extern unsigned long _kc_find_next_bit(const unsigned long *addr, + unsigned long size, + unsigned long offset); +#define find_first_bit(addr, size) find_next_bit((addr), (size), 0) + + +#ifndef netdev_name +static inline const char *_kc_netdev_name(const struct net_device *dev) +{ + if (strchr(dev->name, '%')) + return "(unregistered net_device)"; + return dev->name; +} +#define netdev_name(netdev) _kc_netdev_name(netdev) +#endif /* netdev_name */ + +#ifndef strlcpy +#define strlcpy _kc_strlcpy +extern size_t _kc_strlcpy(char *dest, const char *src, size_t size); +#endif /* strlcpy */ + +#ifndef do_div +#if BITS_PER_LONG == 64 +# define do_div(n,base) ({ \ + uint32_t __base = (base); \ + uint32_t __rem; \ + __rem = ((uint64_t)(n)) % __base; \ + (n) = ((uint64_t)(n)) / __base; \ + __rem; \ + }) +#elif BITS_PER_LONG == 32 +extern uint32_t _kc__div64_32(uint64_t *dividend, uint32_t divisor); +# define do_div(n,base) ({ \ + uint32_t __base = (base); \ + uint32_t __rem; \ + if (likely(((n) >> 32) == 0)) { \ + __rem = (uint32_t)(n) % __base; \ + (n) = (uint32_t)(n) / __base; \ + } else \ + __rem = _kc__div64_32(&(n), __base); \ + __rem; \ + }) +#else /* BITS_PER_LONG == ?? */ +# error do_div() does not yet support the C64 +#endif /* BITS_PER_LONG */ +#endif /* do_div */ + +#ifndef NSEC_PER_SEC +#define NSEC_PER_SEC 1000000000L +#endif + +#undef HAVE_I2C_SUPPORT +#else /* 2.6.0 */ +#if IS_ENABLED(CONFIG_I2C_ALGOBIT) && \ + (RHEL_RELEASE_CODE && (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,9))) +#define HAVE_I2C_SUPPORT +#endif /* IS_ENABLED(CONFIG_I2C_ALGOBIT) */ + +#endif /* 2.6.0 => 2.5.28 */ +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,3) ) +#define dma_pool pci_pool +#define dma_pool_destroy pci_pool_destroy +#define dma_pool_alloc pci_pool_alloc +#define dma_pool_free pci_pool_free + +#define dma_pool_create(name,dev,size,align,allocation) \ + pci_pool_create((name),to_pci_dev(dev),(size),(align),(allocation)) +#endif /* < 2.6.3 */ + +/*****************************************************************************/ +/* 2.6.4 => 2.6.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) +#define MODULE_VERSION(_version) MODULE_INFO(version, _version) +#endif /* 2.6.4 => 2.6.0 */ + +/*****************************************************************************/ +/* 2.6.5 => 2.6.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) ) +#define dma_sync_single_for_cpu dma_sync_single +#define dma_sync_single_for_device dma_sync_single +#define dma_sync_single_range_for_cpu dma_sync_single_range +#define dma_sync_single_range_for_device dma_sync_single_range +#ifndef pci_dma_mapping_error +#define pci_dma_mapping_error _kc_pci_dma_mapping_error +static inline int _kc_pci_dma_mapping_error(dma_addr_t dma_addr) +{ + return dma_addr == 0; +} +#endif +#endif /* 2.6.5 => 2.6.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) +extern int _kc_scnprintf(char * buf, size_t size, const char *fmt, ...); +#define scnprintf(buf, size, fmt, args...) _kc_scnprintf(buf, size, fmt, ##args) +#endif /* < 2.6.4 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,6) ) +/* taken from 2.6 include/linux/bitmap.h */ +#undef bitmap_zero +#define bitmap_zero _kc_bitmap_zero +static inline void _kc_bitmap_zero(unsigned long *dst, int nbits) +{ + if (nbits <= BITS_PER_LONG) + *dst = 0UL; + else { + int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long); + memset(dst, 0, len); + } +} +#define random_ether_addr _kc_random_ether_addr +static inline void _kc_random_ether_addr(u8 *addr) +{ + get_random_bytes(addr, ETH_ALEN); + addr[0] &= 0xfe; /* clear multicast */ + addr[0] |= 0x02; /* set local assignment */ +} +#define page_to_nid(x) 0 + +#endif /* < 2.6.6 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,7) ) +#undef if_mii +#define if_mii _kc_if_mii +static inline struct mii_ioctl_data *_kc_if_mii(struct ifreq *rq) +{ + return (struct mii_ioctl_data *) &rq->ifr_ifru; +} + +#ifndef __force +#define __force +#endif +#endif /* < 2.6.7 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) ) +#ifndef PCI_EXP_DEVCTL +#define PCI_EXP_DEVCTL 8 +#endif +#ifndef PCI_EXP_DEVCTL_CERE +#define PCI_EXP_DEVCTL_CERE 0x0001 +#endif +#define PCI_EXP_FLAGS 2 /* Capabilities register */ +#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ +#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ +#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ +#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ +#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ +#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ +#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ +#define PCI_EXP_DEVCAP 4 /* Device capabilities */ +#define PCI_EXP_DEVSTA 10 /* Device Status */ +#define msleep(x) do { set_current_state(TASK_UNINTERRUPTIBLE); \ + schedule_timeout((x * HZ)/1000 + 2); \ + } while (0) + +#endif /* < 2.6.8 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9)) +#include <net/dsfield.h> +#define __iomem + +#ifndef kcalloc +#define kcalloc(n, size, flags) _kc_kzalloc(((n) * (size)), flags) +extern void *_kc_kzalloc(size_t size, int flags); +#endif +#define MSEC_PER_SEC 1000L +static inline unsigned int _kc_jiffies_to_msecs(const unsigned long j) +{ +#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ) + return (MSEC_PER_SEC / HZ) * j; +#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC) + return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC); +#else + return (j * MSEC_PER_SEC) / HZ; +#endif +} +static inline unsigned long _kc_msecs_to_jiffies(const unsigned int m) +{ + if (m > _kc_jiffies_to_msecs(MAX_JIFFY_OFFSET)) + return MAX_JIFFY_OFFSET; +#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ) + return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ); +#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC) + return m * (HZ / MSEC_PER_SEC); +#else + return (m * HZ + MSEC_PER_SEC - 1) / MSEC_PER_SEC; +#endif +} + +#define msleep_interruptible _kc_msleep_interruptible +static inline unsigned long _kc_msleep_interruptible(unsigned int msecs) +{ + unsigned long timeout = _kc_msecs_to_jiffies(msecs) + 1; + + while (timeout && !signal_pending(current)) { + __set_current_state(TASK_INTERRUPTIBLE); + timeout = schedule_timeout(timeout); + } + return _kc_jiffies_to_msecs(timeout); +} + +/* Basic mode control register. */ +#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ + +#ifndef __le16 +#define __le16 u16 +#endif +#ifndef __le32 +#define __le32 u32 +#endif +#ifndef __le64 +#define __le64 u64 +#endif +#ifndef __be16 +#define __be16 u16 +#endif +#ifndef __be32 +#define __be32 u32 +#endif +#ifndef __be64 +#define __be64 u64 +#endif + +static inline struct vlan_ethhdr *vlan_eth_hdr(const struct sk_buff *skb) +{ + return (struct vlan_ethhdr *)skb->mac.raw; +} + +/* Wake-On-Lan options. */ +#define WAKE_PHY (1 << 0) +#define WAKE_UCAST (1 << 1) +#define WAKE_MCAST (1 << 2) +#define WAKE_BCAST (1 << 3) +#define WAKE_ARP (1 << 4) +#define WAKE_MAGIC (1 << 5) +#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ + +#define skb_header_pointer _kc_skb_header_pointer +static inline void *_kc_skb_header_pointer(const struct sk_buff *skb, + int offset, int len, void *buffer) +{ + int hlen = skb_headlen(skb); + + if (hlen - offset >= len) + return skb->data + offset; + +#ifdef MAX_SKB_FRAGS + if (skb_copy_bits(skb, offset, buffer, len) < 0) + return NULL; + + return buffer; +#else + return NULL; +#endif + +#ifndef NETDEV_TX_OK +#define NETDEV_TX_OK 0 +#endif +#ifndef NETDEV_TX_BUSY +#define NETDEV_TX_BUSY 1 +#endif +#ifndef NETDEV_TX_LOCKED +#define NETDEV_TX_LOCKED -1 +#endif +} + +#ifndef __bitwise +#define __bitwise +#endif +#endif /* < 2.6.9 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) +#ifdef module_param_array_named +#undef module_param_array_named +#define module_param_array_named(name, array, type, nump, perm) \ + static struct kparam_array __param_arr_##name \ + = { ARRAY_SIZE(array), nump, param_set_##type, param_get_##type, \ + sizeof(array[0]), array }; \ + module_param_call(name, param_array_set, param_array_get, \ + &__param_arr_##name, perm) +#endif /* module_param_array_named */ +/* + * num_online is broken for all < 2.6.10 kernels. This is needed to support + * Node module parameter of ixgbe. + */ +#undef num_online_nodes +#define num_online_nodes(n) 1 +extern DECLARE_BITMAP(_kcompat_node_online_map, MAX_NUMNODES); +#undef node_online_map +#define node_online_map _kcompat_node_online_map +#define pci_get_class pci_find_class +#endif /* < 2.6.10 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) ) +#define PCI_D0 0 +#define PCI_D1 1 +#define PCI_D2 2 +#define PCI_D3hot 3 +#define PCI_D3cold 4 +typedef int pci_power_t; +#define pci_choose_state(pdev,state) state +#define PMSG_SUSPEND 3 +#define PCI_EXP_LNKCTL 16 + +#undef NETIF_F_LLTX + +#ifndef ARCH_HAS_PREFETCH +#define prefetch(X) +#endif + +#ifndef NET_IP_ALIGN +#define NET_IP_ALIGN 2 +#endif + +#define KC_USEC_PER_SEC 1000000L +#define usecs_to_jiffies _kc_usecs_to_jiffies +static inline unsigned int _kc_jiffies_to_usecs(const unsigned long j) +{ +#if HZ <= KC_USEC_PER_SEC && !(KC_USEC_PER_SEC % HZ) + return (KC_USEC_PER_SEC / HZ) * j; +#elif HZ > KC_USEC_PER_SEC && !(HZ % KC_USEC_PER_SEC) + return (j + (HZ / KC_USEC_PER_SEC) - 1)/(HZ / KC_USEC_PER_SEC); +#else + return (j * KC_USEC_PER_SEC) / HZ; +#endif +} +static inline unsigned long _kc_usecs_to_jiffies(const unsigned int m) +{ + if (m > _kc_jiffies_to_usecs(MAX_JIFFY_OFFSET)) + return MAX_JIFFY_OFFSET; +#if HZ <= KC_USEC_PER_SEC && !(KC_USEC_PER_SEC % HZ) + return (m + (KC_USEC_PER_SEC / HZ) - 1) / (KC_USEC_PER_SEC / HZ); +#elif HZ > KC_USEC_PER_SEC && !(HZ % KC_USEC_PER_SEC) + return m * (HZ / KC_USEC_PER_SEC); +#else + return (m * HZ + KC_USEC_PER_SEC - 1) / KC_USEC_PER_SEC; +#endif +} + +#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ +#define PCI_EXP_LNKSTA 18 /* Link Status */ +#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ +#define PCI_EXP_SLTCTL 24 /* Slot Control */ +#define PCI_EXP_SLTSTA 26 /* Slot Status */ +#define PCI_EXP_RTCTL 28 /* Root Control */ +#define PCI_EXP_RTCAP 30 /* Root Capabilities */ +#define PCI_EXP_RTSTA 32 /* Root Status */ +#endif /* < 2.6.11 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,12) ) +#include <linux/reboot.h> +#define USE_REBOOT_NOTIFIER + +/* Generic MII registers. */ +#define MII_CTRL1000 0x09 /* 1000BASE-T control */ +#define MII_STAT1000 0x0a /* 1000BASE-T status */ +/* Advertisement control register. */ +#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ +#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymmetric pause */ +/* Link partner ability register. */ +#define LPA_PAUSE_CAP 0x0400 /* Can pause */ +#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ +/* 1000BASE-T Control register */ +#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ +#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ +/* 1000BASE-T Status register */ +#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ +#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ + +#ifndef is_zero_ether_addr +#define is_zero_ether_addr _kc_is_zero_ether_addr +static inline int _kc_is_zero_ether_addr(const u8 *addr) +{ + return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]); +} +#endif /* is_zero_ether_addr */ +#ifndef is_multicast_ether_addr +#define is_multicast_ether_addr _kc_is_multicast_ether_addr +static inline int _kc_is_multicast_ether_addr(const u8 *addr) +{ + return addr[0] & 0x01; +} +#endif /* is_multicast_ether_addr */ +#endif /* < 2.6.12 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) ) +#ifndef kstrdup +#define kstrdup _kc_kstrdup +extern char *_kc_kstrdup(const char *s, unsigned int gfp); +#endif +#endif /* < 2.6.13 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) ) +#define pm_message_t u32 +#ifndef kzalloc +#define kzalloc _kc_kzalloc +extern void *_kc_kzalloc(size_t size, int flags); +#endif + +/* Generic MII registers. */ +#define MII_ESTATUS 0x0f /* Extended Status */ +/* Basic mode status register. */ +#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ +/* Extended status register. */ +#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ +#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ + +#define SUPPORTED_Pause (1 << 13) +#define SUPPORTED_Asym_Pause (1 << 14) +#define ADVERTISED_Pause (1 << 13) +#define ADVERTISED_Asym_Pause (1 << 14) + +#if (!(RHEL_RELEASE_CODE && \ + (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,3)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0)))) +#if ((LINUX_VERSION_CODE == KERNEL_VERSION(2,6,9)) && !defined(gfp_t)) +#define gfp_t unsigned +#else +typedef unsigned gfp_t; +#endif +#endif /* !RHEL4.3->RHEL5.0 */ + +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,9) ) +#ifdef CONFIG_X86_64 +#define dma_sync_single_range_for_cpu(dev, addr, off, sz, dir) \ + dma_sync_single_for_cpu((dev), (addr), (off) + (sz), (dir)) +#define dma_sync_single_range_for_device(dev, addr, off, sz, dir) \ + dma_sync_single_for_device((dev), (addr), (off) + (sz), (dir)) +#endif +#endif +#endif /* < 2.6.14 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15) ) +#ifndef vmalloc_node +#define vmalloc_node(a,b) vmalloc(a) +#endif /* vmalloc_node*/ + +#define setup_timer(_timer, _function, _data) \ +do { \ + (_timer)->function = _function; \ + (_timer)->data = _data; \ + init_timer(_timer); \ +} while (0) +#ifndef device_can_wakeup +#define device_can_wakeup(dev) (1) +#endif +#ifndef device_set_wakeup_enable +#define device_set_wakeup_enable(dev, val) do{}while(0) +#endif +#ifndef device_init_wakeup +#define device_init_wakeup(dev,val) do {} while (0) +#endif +static inline unsigned _kc_compare_ether_addr(const u8 *addr1, const u8 *addr2) +{ + const u16 *a = (const u16 *) addr1; + const u16 *b = (const u16 *) addr2; + + return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0; +} +#undef compare_ether_addr +#define compare_ether_addr(addr1, addr2) _kc_compare_ether_addr(addr1, addr2) +#endif /* < 2.6.15 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16) ) +#undef DEFINE_MUTEX +#define DEFINE_MUTEX(x) DECLARE_MUTEX(x) +#define mutex_lock(x) down_interruptible(x) +#define mutex_unlock(x) up(x) + +#ifndef ____cacheline_internodealigned_in_smp +#ifdef CONFIG_SMP +#define ____cacheline_internodealigned_in_smp ____cacheline_aligned_in_smp +#else +#define ____cacheline_internodealigned_in_smp +#endif /* CONFIG_SMP */ +#endif /* ____cacheline_internodealigned_in_smp */ +#undef HAVE_PCI_ERS +#else /* 2.6.16 and above */ +#undef HAVE_PCI_ERS +#define HAVE_PCI_ERS +#if ( SLE_VERSION_CODE && SLE_VERSION_CODE == SLE_VERSION(10,4,0) ) +#ifdef device_can_wakeup +#undef device_can_wakeup +#endif /* device_can_wakeup */ +#define device_can_wakeup(dev) 1 +#endif /* SLE_VERSION(10,4,0) */ +#endif /* < 2.6.16 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17) ) +#ifndef dev_notice +#define dev_notice(dev, fmt, args...) \ + dev_printk(KERN_NOTICE, dev, fmt, ## args) +#endif + +#ifndef first_online_node +#define first_online_node 0 +#endif +#ifndef NET_SKB_PAD +#define NET_SKB_PAD 16 +#endif +#endif /* < 2.6.17 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ) + +#ifndef IRQ_HANDLED +#define irqreturn_t void +#define IRQ_HANDLED +#define IRQ_NONE +#endif + +#ifndef IRQF_PROBE_SHARED +#ifdef SA_PROBEIRQ +#define IRQF_PROBE_SHARED SA_PROBEIRQ +#else +#define IRQF_PROBE_SHARED 0 +#endif +#endif + +#ifndef IRQF_SHARED +#define IRQF_SHARED SA_SHIRQ +#endif + +#ifndef ARRAY_SIZE +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) +#endif + +#ifndef FIELD_SIZEOF +#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) +#endif + +#ifndef skb_is_gso +#ifdef NETIF_F_TSO +#define skb_is_gso _kc_skb_is_gso +static inline int _kc_skb_is_gso(const struct sk_buff *skb) +{ + return skb_shinfo(skb)->gso_size; +} +#else +#define skb_is_gso(a) 0 +#endif +#endif + +#ifndef resource_size_t +#define resource_size_t unsigned long +#endif + +#ifdef skb_pad +#undef skb_pad +#endif +#define skb_pad(x,y) _kc_skb_pad(x, y) +int _kc_skb_pad(struct sk_buff *skb, int pad); +#ifdef skb_padto +#undef skb_padto +#endif +#define skb_padto(x,y) _kc_skb_padto(x, y) +static inline int _kc_skb_padto(struct sk_buff *skb, unsigned int len) +{ + unsigned int size = skb->len; + if(likely(size >= len)) + return 0; + return _kc_skb_pad(skb, len - size); +} + +#ifndef DECLARE_PCI_UNMAP_ADDR +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + u32 LEN_NAME +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) +#endif /* DECLARE_PCI_UNMAP_ADDR */ +#endif /* < 2.6.18 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) ) + +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,0))) +#define i_private u.generic_ip +#endif /* >= RHEL 5.0 */ + +#ifndef DIV_ROUND_UP +#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) +#endif +#ifndef __ALIGN_MASK +#define __ALIGN_MASK(x, mask) (((x) + (mask)) & ~(mask)) +#endif +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ) +#if (!((RHEL_RELEASE_CODE && \ + ((RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,4) && \ + RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0)) || \ + (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,0)))))) +typedef irqreturn_t (*irq_handler_t)(int, void*, struct pt_regs *); +#endif +#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0)) +#undef CONFIG_INET_LRO +#undef CONFIG_INET_LRO_MODULE +#ifdef IXGBE_FCOE +#undef CONFIG_FCOE +#undef CONFIG_FCOE_MODULE +#endif /* IXGBE_FCOE */ +#endif +typedef irqreturn_t (*new_handler_t)(int, void*); +static inline irqreturn_t _kc_request_irq(unsigned int irq, new_handler_t handler, unsigned long flags, const char *devname, void *dev_id) +#else /* 2.4.x */ +typedef void (*irq_handler_t)(int, void*, struct pt_regs *); +typedef void (*new_handler_t)(int, void*); +static inline int _kc_request_irq(unsigned int irq, new_handler_t handler, unsigned long flags, const char *devname, void *dev_id) +#endif /* >= 2.5.x */ +{ + irq_handler_t new_handler = (irq_handler_t) handler; + return request_irq(irq, new_handler, flags, devname, dev_id); +} + +#undef request_irq +#define request_irq(irq, handler, flags, devname, dev_id) _kc_request_irq((irq), (handler), (flags), (devname), (dev_id)) + +#define irq_handler_t new_handler_t +/* pci_restore_state and pci_save_state handles MSI/PCIE from 2.6.19 */ +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4))) +#define PCIE_CONFIG_SPACE_LEN 256 +#define PCI_CONFIG_SPACE_LEN 64 +#define PCIE_LINK_STATUS 0x12 +#define pci_config_space_ich8lan() do {} while(0) +#undef pci_save_state +extern int _kc_pci_save_state(struct pci_dev *); +#define pci_save_state(pdev) _kc_pci_save_state(pdev) +#undef pci_restore_state +extern void _kc_pci_restore_state(struct pci_dev *); +#define pci_restore_state(pdev) _kc_pci_restore_state(pdev) +#endif /* !(RHEL_RELEASE_CODE >= RHEL 5.4) */ + +#ifdef HAVE_PCI_ERS +#undef free_netdev +extern void _kc_free_netdev(struct net_device *); +#define free_netdev(netdev) _kc_free_netdev(netdev) +#endif +static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev) +{ + return 0; +} +#define pci_disable_pcie_error_reporting(dev) do {} while (0) +#define pci_cleanup_aer_uncorrect_error_status(dev) do {} while (0) + +extern void *_kc_kmemdup(const void *src, size_t len, unsigned gfp); +#define kmemdup(src, len, gfp) _kc_kmemdup(src, len, gfp) +#ifndef bool +#define bool _Bool +#define true 1 +#define false 0 +#endif +#else /* 2.6.19 */ +#include <linux/aer.h> +#include <linux/string.h> +#endif /* < 2.6.19 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ) +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28) ) +#undef INIT_WORK +#define INIT_WORK(_work, _func) \ +do { \ + INIT_LIST_HEAD(&(_work)->entry); \ + (_work)->pending = 0; \ + (_work)->func = (void (*)(void *))_func; \ + (_work)->data = _work; \ + init_timer(&(_work)->timer); \ +} while (0) +#endif + +#ifndef PCI_VDEVICE +#define PCI_VDEVICE(ven, dev) \ + PCI_VENDOR_ID_##ven, (dev), \ + PCI_ANY_ID, PCI_ANY_ID, 0, 0 +#endif + +#ifndef PCI_VENDOR_ID_INTEL +#define PCI_VENDOR_ID_INTEL 0x8086 +#endif + +#ifndef round_jiffies +#define round_jiffies(x) x +#endif + +#define csum_offset csum + +#define HAVE_EARLY_VMALLOC_NODE +#define dev_to_node(dev) -1 +#undef set_dev_node +/* remove compiler warning with b=b, for unused variable */ +#define set_dev_node(a, b) do { (b) = (b); } while(0) + +#if (!(RHEL_RELEASE_CODE && \ + (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(4,7)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))) || \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,6)))) && \ + !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(10,2,0))) +typedef __u16 __bitwise __sum16; +typedef __u32 __bitwise __wsum; +#endif + +#if (!(RHEL_RELEASE_CODE && \ + (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(4,7)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))) || \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4)))) && \ + !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(10,2,0))) +static inline __wsum csum_unfold(__sum16 n) +{ + return (__force __wsum)n; +} +#endif + +#else /* < 2.6.20 */ +#define HAVE_DEVICE_NUMA_NODE +#endif /* < 2.6.20 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) ) +#define to_net_dev(class) container_of(class, struct net_device, class_dev) +#define NETDEV_CLASS_DEV +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5))) +#define vlan_group_get_device(vg, id) (vg->vlan_devices[id]) +#define vlan_group_set_device(vg, id, dev) \ + do { \ + if (vg) vg->vlan_devices[id] = dev; \ + } while (0) +#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5)) */ +#define pci_channel_offline(pdev) (pdev->error_state && \ + pdev->error_state != pci_channel_io_normal) +#define pci_request_selected_regions(pdev, bars, name) \ + pci_request_regions(pdev, name) +#define pci_release_selected_regions(pdev, bars) pci_release_regions(pdev); + +#ifndef __aligned +#define __aligned(x) __attribute__((aligned(x))) +#endif + +extern struct pci_dev *_kc_netdev_to_pdev(struct net_device *netdev); +#define netdev_to_dev(netdev) \ + pci_dev_to_dev(_kc_netdev_to_pdev(netdev)) +#else +static inline struct device *netdev_to_dev(struct net_device *netdev) +{ + return &netdev->dev; +} + +#endif /* < 2.6.21 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ) +#define tcp_hdr(skb) (skb->h.th) +#define tcp_hdrlen(skb) (skb->h.th->doff << 2) +#define skb_transport_offset(skb) (skb->h.raw - skb->data) +#define skb_transport_header(skb) (skb->h.raw) +#define ipv6_hdr(skb) (skb->nh.ipv6h) +#define ip_hdr(skb) (skb->nh.iph) +#define skb_network_offset(skb) (skb->nh.raw - skb->data) +#define skb_network_header(skb) (skb->nh.raw) +#define skb_tail_pointer(skb) skb->tail +#define skb_reset_tail_pointer(skb) \ + do { \ + skb->tail = skb->data; \ + } while (0) +#define skb_set_tail_pointer(skb, offset) \ + do { \ + skb->tail = skb->data + offset; \ + } while (0) +#define skb_copy_to_linear_data(skb, from, len) \ + memcpy(skb->data, from, len) +#define skb_copy_to_linear_data_offset(skb, offset, from, len) \ + memcpy(skb->data + offset, from, len) +#define skb_network_header_len(skb) (skb->h.raw - skb->nh.raw) +#define pci_register_driver pci_module_init +#define skb_mac_header(skb) skb->mac.raw + +#ifdef NETIF_F_MULTI_QUEUE +#ifndef alloc_etherdev_mq +#define alloc_etherdev_mq(_a, _b) alloc_etherdev(_a) +#endif +#endif /* NETIF_F_MULTI_QUEUE */ + +#ifndef ETH_FCS_LEN +#define ETH_FCS_LEN 4 +#endif +#define cancel_work_sync(x) flush_scheduled_work() +#ifndef udp_hdr +#define udp_hdr _udp_hdr +static inline struct udphdr *_udp_hdr(const struct sk_buff *skb) +{ + return (struct udphdr *)skb_transport_header(skb); +} +#endif + +#ifdef cpu_to_be16 +#undef cpu_to_be16 +#endif +#define cpu_to_be16(x) __constant_htons(x) + +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,1))) +enum { + DUMP_PREFIX_NONE, + DUMP_PREFIX_ADDRESS, + DUMP_PREFIX_OFFSET +}; +#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,1)) */ +#ifndef hex_asc +#define hex_asc(x) "0123456789abcdef"[x] +#endif +#include <linux/ctype.h> +extern void _kc_print_hex_dump(const char *level, const char *prefix_str, + int prefix_type, int rowsize, int groupsize, + const void *buf, size_t len, bool ascii); +#define print_hex_dump(lvl, s, t, r, g, b, l, a) \ + _kc_print_hex_dump(lvl, s, t, r, g, b, l, a) +#ifndef ADVERTISED_2500baseX_Full +#define ADVERTISED_2500baseX_Full (1 << 15) +#endif +#ifndef SUPPORTED_2500baseX_Full +#define SUPPORTED_2500baseX_Full (1 << 15) +#endif + +#ifdef HAVE_I2C_SUPPORT +#include <linux/i2c.h> +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5))) +struct i2c_board_info { + char driver_name[KOBJ_NAME_LEN]; + char type[I2C_NAME_SIZE]; + unsigned short flags; + unsigned short addr; + void *platform_data; +}; +#define I2C_BOARD_INFO(driver, dev_addr) .driver_name = (driver),\ + .addr = (dev_addr) +#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5)) */ +#define i2c_new_device(adap, info) _kc_i2c_new_device(adap, info) +extern struct i2c_client * +_kc_i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info); +#endif /* HAVE_I2C_SUPPORT */ + +#else /* 2.6.22 */ +#define ETH_TYPE_TRANS_SETS_DEV +#define HAVE_NETDEV_STATS_IN_NETDEV +#endif /* < 2.6.22 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22) ) +#undef SET_MODULE_OWNER +#define SET_MODULE_OWNER(dev) do { } while (0) +#endif /* > 2.6.22 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) ) +#define netif_subqueue_stopped(_a, _b) 0 +#ifndef PTR_ALIGN +#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a))) +#endif + +#ifndef CONFIG_PM_SLEEP +#define CONFIG_PM_SLEEP CONFIG_PM +#endif + +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13) ) +#define HAVE_ETHTOOL_GET_PERM_ADDR +#endif /* 2.6.14 through 2.6.22 */ +#endif /* < 2.6.23 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ) +#ifndef ETH_FLAG_LRO +#define ETH_FLAG_LRO NETIF_F_LRO +#endif + +/* if GRO is supported then the napi struct must already exist */ +#ifndef NETIF_F_GRO +/* NAPI API changes in 2.6.24 break everything */ +struct napi_struct { + /* used to look up the real NAPI polling routine */ + int (*poll)(struct napi_struct *, int); + struct net_device *dev; + int weight; +}; +#endif + +#ifdef NAPI +extern int __kc_adapter_clean(struct net_device *, int *); +extern struct net_device *napi_to_poll_dev(const struct napi_struct *napi); +#define netif_napi_add(_netdev, _napi, _poll, _weight) \ + do { \ + struct napi_struct *__napi = (_napi); \ + struct net_device *poll_dev = napi_to_poll_dev(__napi); \ + poll_dev->poll = &(__kc_adapter_clean); \ + poll_dev->priv = (_napi); \ + poll_dev->weight = (_weight); \ + set_bit(__LINK_STATE_RX_SCHED, &poll_dev->state); \ + set_bit(__LINK_STATE_START, &poll_dev->state);\ + dev_hold(poll_dev); \ + __napi->poll = &(_poll); \ + __napi->weight = (_weight); \ + __napi->dev = (_netdev); \ + } while (0) +#define netif_napi_del(_napi) \ + do { \ + struct net_device *poll_dev = napi_to_poll_dev(_napi); \ + WARN_ON(!test_bit(__LINK_STATE_RX_SCHED, &poll_dev->state)); \ + dev_put(poll_dev); \ + memset(poll_dev, 0, sizeof(struct net_device));\ + } while (0) +#define napi_schedule_prep(_napi) \ + (netif_running((_napi)->dev) && netif_rx_schedule_prep(napi_to_poll_dev(_napi))) +#define napi_schedule(_napi) \ + do { \ + if (napi_schedule_prep(_napi)) \ + __netif_rx_schedule(napi_to_poll_dev(_napi)); \ + } while (0) +#define napi_enable(_napi) netif_poll_enable(napi_to_poll_dev(_napi)) +#define napi_disable(_napi) netif_poll_disable(napi_to_poll_dev(_napi)) +#ifdef CONFIG_SMP +static inline void napi_synchronize(const struct napi_struct *n) +{ + struct net_device *dev = napi_to_poll_dev(n); + + while (test_bit(__LINK_STATE_RX_SCHED, &dev->state)) { + /* No hurry. */ + msleep(1); + } +} +#else +#define napi_synchronize(n) barrier() +#endif /* CONFIG_SMP */ +#define __napi_schedule(_napi) __netif_rx_schedule(napi_to_poll_dev(_napi)) +#ifndef NETIF_F_GRO +#define napi_complete(_napi) netif_rx_complete(napi_to_poll_dev(_napi)) +#else +#define napi_complete(_napi) \ + do { \ + napi_gro_flush(_napi); \ + netif_rx_complete(napi_to_poll_dev(_napi)); \ + } while (0) +#endif /* NETIF_F_GRO */ +#else /* NAPI */ +#define netif_napi_add(_netdev, _napi, _poll, _weight) \ + do { \ + struct napi_struct *__napi = _napi; \ + _netdev->poll = &(_poll); \ + _netdev->weight = (_weight); \ + __napi->poll = &(_poll); \ + __napi->weight = (_weight); \ + __napi->dev = (_netdev); \ + } while (0) +#define netif_napi_del(_a) do {} while (0) +#endif /* NAPI */ + +#undef dev_get_by_name +#define dev_get_by_name(_a, _b) dev_get_by_name(_b) +#define __netif_subqueue_stopped(_a, _b) netif_subqueue_stopped(_a, _b) +#ifndef DMA_BIT_MASK +#define DMA_BIT_MASK(n) (((n) == 64) ? DMA_64BIT_MASK : ((1ULL<<(n))-1)) +#endif + +#ifdef NETIF_F_TSO6 +#define skb_is_gso_v6 _kc_skb_is_gso_v6 +static inline int _kc_skb_is_gso_v6(const struct sk_buff *skb) +{ + return skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6; +} +#endif /* NETIF_F_TSO6 */ + +#ifndef KERN_CONT +#define KERN_CONT "" +#endif +#ifndef pr_err +#define pr_err(fmt, arg...) \ + printk(KERN_ERR fmt, ##arg) +#endif +#else /* < 2.6.24 */ +#define HAVE_ETHTOOL_GET_SSET_COUNT +#define HAVE_NETDEV_NAPI_LIST +#endif /* < 2.6.24 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,24) ) +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) ) +#include <linux/pm_qos_params.h> +#else /* >= 3.2.0 */ +#include <linux/pm_qos.h> +#endif /* else >= 3.2.0 */ +#endif /* > 2.6.24 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25) ) +#define PM_QOS_CPU_DMA_LATENCY 1 + +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18) ) +#include <linux/latency.h> +#define PM_QOS_DEFAULT_VALUE INFINITE_LATENCY +#define pm_qos_add_requirement(pm_qos_class, name, value) \ + set_acceptable_latency(name, value) +#define pm_qos_remove_requirement(pm_qos_class, name) \ + remove_acceptable_latency(name) +#define pm_qos_update_requirement(pm_qos_class, name, value) \ + modify_acceptable_latency(name, value) +#else +#define PM_QOS_DEFAULT_VALUE -1 +#define pm_qos_add_requirement(pm_qos_class, name, value) +#define pm_qos_remove_requirement(pm_qos_class, name) +#define pm_qos_update_requirement(pm_qos_class, name, value) { \ + if (value != PM_QOS_DEFAULT_VALUE) { \ + printk(KERN_WARNING "%s: unable to set PM QoS requirement\n", \ + pci_name(adapter->pdev)); \ + } \ +} + +#endif /* > 2.6.18 */ + +#define pci_enable_device_mem(pdev) pci_enable_device(pdev) + +#ifndef DEFINE_PCI_DEVICE_TABLE +#define DEFINE_PCI_DEVICE_TABLE(_table) struct pci_device_id _table[] +#endif /* DEFINE_PCI_DEVICE_TABLE */ + + +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) +#ifndef IGB_PROCFS +#define IGB_PROCFS +#endif /* IGB_PROCFS */ +#endif /* >= 2.6.0 */ + +#else /* < 2.6.25 */ + + +#if IS_ENABLED(CONFIG_HWMON) +#ifndef IGB_HWMON +#define IGB_HWMON +#endif /* IGB_HWMON */ +#endif /* CONFIG_HWMON */ + +#endif /* < 2.6.25 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) ) +#ifndef clamp_t +#define clamp_t(type, val, min, max) ({ \ + type __val = (val); \ + type __min = (min); \ + type __max = (max); \ + __val = __val < __min ? __min : __val; \ + __val > __max ? __max : __val; }) +#endif /* clamp_t */ +#undef kzalloc_node +#define kzalloc_node(_size, _flags, _node) kzalloc(_size, _flags) + +extern void _kc_pci_disable_link_state(struct pci_dev *dev, int state); +#define pci_disable_link_state(p, s) _kc_pci_disable_link_state(p, s) +#else /* < 2.6.26 */ +#include <linux/pci-aspm.h> +#define HAVE_NETDEV_VLAN_FEATURES +#ifndef PCI_EXP_LNKCAP_ASPMS +#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ +#endif /* PCI_EXP_LNKCAP_ASPMS */ +#endif /* < 2.6.26 */ +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27) ) +static inline void _kc_ethtool_cmd_speed_set(struct ethtool_cmd *ep, + __u32 speed) +{ + ep->speed = (__u16)speed; + /* ep->speed_hi = (__u16)(speed >> 16); */ +} +#define ethtool_cmd_speed_set _kc_ethtool_cmd_speed_set + +static inline __u32 _kc_ethtool_cmd_speed(struct ethtool_cmd *ep) +{ + /* no speed_hi before 2.6.27, and probably no need for it yet */ + return (__u32)ep->speed; +} +#define ethtool_cmd_speed _kc_ethtool_cmd_speed + +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15) ) +#if ((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)) && defined(CONFIG_PM)) +#define ANCIENT_PM 1 +#elif ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) && \ + (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) && \ + defined(CONFIG_PM_SLEEP)) +#define NEWER_PM 1 +#endif +#if defined(ANCIENT_PM) || defined(NEWER_PM) +#undef device_set_wakeup_enable +#define device_set_wakeup_enable(dev, val) \ + do { \ + u16 pmc = 0; \ + int pm = pci_find_capability(adapter->pdev, PCI_CAP_ID_PM); \ + if (pm) { \ + pci_read_config_word(adapter->pdev, pm + PCI_PM_PMC, \ + &pmc); \ + } \ + (dev)->power.can_wakeup = !!(pmc >> 11); \ + (dev)->power.should_wakeup = (val && (pmc >> 11)); \ + } while (0) +#endif /* 2.6.15-2.6.22 and CONFIG_PM or 2.6.23-2.6.25 and CONFIG_PM_SLEEP */ +#endif /* 2.6.15 through 2.6.27 */ +#ifndef netif_napi_del +#define netif_napi_del(_a) do {} while (0) +#ifdef NAPI +#ifdef CONFIG_NETPOLL +#undef netif_napi_del +#define netif_napi_del(_a) list_del(&(_a)->dev_list); +#endif +#endif +#endif /* netif_napi_del */ +#ifdef dma_mapping_error +#undef dma_mapping_error +#endif +#define dma_mapping_error(dev, dma_addr) pci_dma_mapping_error(dma_addr) + +#ifdef CONFIG_NETDEVICES_MULTIQUEUE +#define HAVE_TX_MQ +#endif + +#ifdef HAVE_TX_MQ +extern void _kc_netif_tx_stop_all_queues(struct net_device *); +extern void _kc_netif_tx_wake_all_queues(struct net_device *); +extern void _kc_netif_tx_start_all_queues(struct net_device *); +#define netif_tx_stop_all_queues(a) _kc_netif_tx_stop_all_queues(a) +#define netif_tx_wake_all_queues(a) _kc_netif_tx_wake_all_queues(a) +#define netif_tx_start_all_queues(a) _kc_netif_tx_start_all_queues(a) +#undef netif_stop_subqueue +#define netif_stop_subqueue(_ndev,_qi) do { \ + if (netif_is_multiqueue((_ndev))) \ + netif_stop_subqueue((_ndev), (_qi)); \ + else \ + netif_stop_queue((_ndev)); \ + } while (0) +#undef netif_start_subqueue +#define netif_start_subqueue(_ndev,_qi) do { \ + if (netif_is_multiqueue((_ndev))) \ + netif_start_subqueue((_ndev), (_qi)); \ + else \ + netif_start_queue((_ndev)); \ + } while (0) +#else /* HAVE_TX_MQ */ +#define netif_tx_stop_all_queues(a) netif_stop_queue(a) +#define netif_tx_wake_all_queues(a) netif_wake_queue(a) +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12) ) +#define netif_tx_start_all_queues(a) netif_start_queue(a) +#else +#define netif_tx_start_all_queues(a) do {} while (0) +#endif +#define netif_stop_subqueue(_ndev,_qi) netif_stop_queue((_ndev)) +#define netif_start_subqueue(_ndev,_qi) netif_start_queue((_ndev)) +#endif /* HAVE_TX_MQ */ +#ifndef NETIF_F_MULTI_QUEUE +#define NETIF_F_MULTI_QUEUE 0 +#define netif_is_multiqueue(a) 0 +#define netif_wake_subqueue(a, b) +#endif /* NETIF_F_MULTI_QUEUE */ + +#ifndef __WARN_printf +extern void __kc_warn_slowpath(const char *file, const int line, + const char *fmt, ...) __attribute__((format(printf, 3, 4))); +#define __WARN_printf(arg...) __kc_warn_slowpath(__FILE__, __LINE__, arg) +#endif /* __WARN_printf */ + +#ifndef WARN +#define WARN(condition, format...) ({ \ + int __ret_warn_on = !!(condition); \ + if (unlikely(__ret_warn_on)) \ + __WARN_printf(format); \ + unlikely(__ret_warn_on); \ +}) +#endif /* WARN */ +#undef HAVE_IXGBE_DEBUG_FS +#undef HAVE_IGB_DEBUG_FS +#else /* < 2.6.27 */ +#define HAVE_TX_MQ +#define HAVE_NETDEV_SELECT_QUEUE +#ifdef CONFIG_DEBUG_FS +#define HAVE_IXGBE_DEBUG_FS +#define HAVE_IGB_DEBUG_FS +#endif /* CONFIG_DEBUG_FS */ +#endif /* < 2.6.27 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ) +#define pci_ioremap_bar(pdev, bar) ioremap(pci_resource_start(pdev, bar), \ + pci_resource_len(pdev, bar)) +#define pci_wake_from_d3 _kc_pci_wake_from_d3 +#define pci_prepare_to_sleep _kc_pci_prepare_to_sleep +extern int _kc_pci_wake_from_d3(struct pci_dev *dev, bool enable); +extern int _kc_pci_prepare_to_sleep(struct pci_dev *dev); +#define netdev_alloc_page(a) alloc_page(GFP_ATOMIC) +#ifndef __skb_queue_head_init +static inline void __kc_skb_queue_head_init(struct sk_buff_head *list) +{ + list->prev = list->next = (struct sk_buff *)list; + list->qlen = 0; +} +#define __skb_queue_head_init(_q) __kc_skb_queue_head_init(_q) +#endif + +#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ +#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ + +#endif /* < 2.6.28 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29) ) +#ifndef swap +#define swap(a, b) \ + do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0) +#endif +#define pci_request_selected_regions_exclusive(pdev, bars, name) \ + pci_request_selected_regions(pdev, bars, name) +#ifndef CONFIG_NR_CPUS +#define CONFIG_NR_CPUS 1 +#endif /* CONFIG_NR_CPUS */ +#ifndef pcie_aspm_enabled +#define pcie_aspm_enabled() (1) +#endif /* pcie_aspm_enabled */ + +#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */ + +#ifndef pci_clear_master +extern void _kc_pci_clear_master(struct pci_dev *dev); +#define pci_clear_master(dev) _kc_pci_clear_master(dev) +#endif + +#ifndef PCI_EXP_LNKCTL_ASPMC +#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ +#endif +#else /* < 2.6.29 */ +#ifndef HAVE_NET_DEVICE_OPS +#define HAVE_NET_DEVICE_OPS +#endif +#ifdef CONFIG_DCB +#define HAVE_PFC_MODE_ENABLE +#endif /* CONFIG_DCB */ +#endif /* < 2.6.29 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ) +#define skb_rx_queue_recorded(a) false +#define skb_get_rx_queue(a) 0 +#define skb_record_rx_queue(a, b) do {} while (0) +#define skb_tx_hash(n, s) ___kc_skb_tx_hash((n), (s), (n)->real_num_tx_queues) +#ifndef CONFIG_PCI_IOV +#undef pci_enable_sriov +#define pci_enable_sriov(a, b) -ENOTSUPP +#undef pci_disable_sriov +#define pci_disable_sriov(a) do {} while (0) +#endif /* CONFIG_PCI_IOV */ +#ifndef pr_cont +#define pr_cont(fmt, ...) \ + printk(KERN_CONT fmt, ##__VA_ARGS__) +#endif /* pr_cont */ +static inline void _kc_synchronize_irq(unsigned int a) +{ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28) ) + synchronize_irq(); +#else /* < 2.5.28 */ + synchronize_irq(a); +#endif /* < 2.5.28 */ +} +#undef synchronize_irq +#define synchronize_irq(a) _kc_synchronize_irq(a) + +#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ + +#else /* < 2.6.30 */ +#define HAVE_ASPM_QUIRKS +#endif /* < 2.6.30 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31) ) +#define ETH_P_1588 0x88F7 +#define ETH_P_FIP 0x8914 +#ifndef netdev_uc_count +#define netdev_uc_count(dev) ((dev)->uc_count) +#endif +#ifndef netdev_for_each_uc_addr +#define netdev_for_each_uc_addr(uclist, dev) \ + for (uclist = dev->uc_list; uclist; uclist = uclist->next) +#endif +#ifndef PORT_OTHER +#define PORT_OTHER 0xff +#endif +#ifndef MDIO_PHY_ID_PRTAD +#define MDIO_PHY_ID_PRTAD 0x03e0 +#endif +#ifndef MDIO_PHY_ID_DEVAD +#define MDIO_PHY_ID_DEVAD 0x001f +#endif +#ifndef skb_dst +#define skb_dst(s) ((s)->dst) +#endif + +#ifndef SUPPORTED_1000baseKX_Full +#define SUPPORTED_1000baseKX_Full (1 << 17) +#endif +#ifndef SUPPORTED_10000baseKX4_Full +#define SUPPORTED_10000baseKX4_Full (1 << 18) +#endif +#ifndef SUPPORTED_10000baseKR_Full +#define SUPPORTED_10000baseKR_Full (1 << 19) +#endif + +#ifndef ADVERTISED_1000baseKX_Full +#define ADVERTISED_1000baseKX_Full (1 << 17) +#endif +#ifndef ADVERTISED_10000baseKX4_Full +#define ADVERTISED_10000baseKX4_Full (1 << 18) +#endif +#ifndef ADVERTISED_10000baseKR_Full +#define ADVERTISED_10000baseKR_Full (1 << 19) +#endif + +#else /* < 2.6.31 */ +#ifndef HAVE_NETDEV_STORAGE_ADDRESS +#define HAVE_NETDEV_STORAGE_ADDRESS +#endif +#ifndef HAVE_NETDEV_HW_ADDR +#define HAVE_NETDEV_HW_ADDR +#endif +#ifndef HAVE_TRANS_START_IN_QUEUE +#define HAVE_TRANS_START_IN_QUEUE +#endif +#ifndef HAVE_INCLUDE_LINUX_MDIO_H +#define HAVE_INCLUDE_LINUX_MDIO_H +#endif +#endif /* < 2.6.31 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32) ) +#undef netdev_tx_t +#define netdev_tx_t int +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef NETIF_F_FCOE_MTU +#define NETIF_F_FCOE_MTU (1 << 26) +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) +static inline int _kc_pm_runtime_get_sync() +{ + return 1; +} +#define pm_runtime_get_sync(dev) _kc_pm_runtime_get_sync() +#else /* 2.6.0 => 2.6.32 */ +static inline int _kc_pm_runtime_get_sync(struct device *dev) +{ + return 1; +} +#ifndef pm_runtime_get_sync +#define pm_runtime_get_sync(dev) _kc_pm_runtime_get_sync(dev) +#endif +#endif /* 2.6.0 => 2.6.32 */ +#ifndef pm_runtime_put +#define pm_runtime_put(dev) do {} while (0) +#endif +#ifndef pm_runtime_put_sync +#define pm_runtime_put_sync(dev) do {} while (0) +#endif +#ifndef pm_runtime_resume +#define pm_runtime_resume(dev) do {} while (0) +#endif +#ifndef pm_schedule_suspend +#define pm_schedule_suspend(dev, t) do {} while (0) +#endif +#ifndef pm_runtime_set_suspended +#define pm_runtime_set_suspended(dev) do {} while (0) +#endif +#ifndef pm_runtime_disable +#define pm_runtime_disable(dev) do {} while (0) +#endif +#ifndef pm_runtime_put_noidle +#define pm_runtime_put_noidle(dev) do {} while (0) +#endif +#ifndef pm_runtime_set_active +#define pm_runtime_set_active(dev) do {} while (0) +#endif +#ifndef pm_runtime_enable +#define pm_runtime_enable(dev) do {} while (0) +#endif +#ifndef pm_runtime_get_noresume +#define pm_runtime_get_noresume(dev) do {} while (0) +#endif +#else /* < 2.6.32 */ +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef HAVE_NETDEV_OPS_FCOE_ENABLE +#define HAVE_NETDEV_OPS_FCOE_ENABLE +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ +#ifdef CONFIG_DCB +#ifndef HAVE_DCBNL_OPS_GETAPP +#define HAVE_DCBNL_OPS_GETAPP +#endif +#endif /* CONFIG_DCB */ +#include <linux/pm_runtime.h> +/* IOV bad DMA target work arounds require at least this kernel rev support */ +#define HAVE_PCIE_TYPE +#endif /* < 2.6.32 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33) ) +#ifndef pci_pcie_cap +#define pci_pcie_cap(pdev) pci_find_capability(pdev, PCI_CAP_ID_EXP) +#endif +#ifndef IPV4_FLOW +#define IPV4_FLOW 0x10 +#endif /* IPV4_FLOW */ +#ifndef IPV6_FLOW +#define IPV6_FLOW 0x11 +#endif /* IPV6_FLOW */ +/* Features back-ported to RHEL6 or SLES11 SP1 after 2.6.32 */ +#if ( (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0)) || \ + (SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,1,0)) ) +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef HAVE_NETDEV_OPS_FCOE_GETWWN +#define HAVE_NETDEV_OPS_FCOE_GETWWN +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ +#endif /* RHEL6 or SLES11 SP1 */ +#ifndef __percpu +#define __percpu +#endif /* __percpu */ +#ifndef PORT_DA +#define PORT_DA PORT_OTHER +#endif +#ifndef PORT_NONE +#define PORT_NONE PORT_OTHER +#endif + +#if ((RHEL_RELEASE_CODE && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,3)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0)))) +#if !defined(CONFIG_X86_32) && !defined(CONFIG_NEED_DMA_MAP_STATE) +#undef DEFINE_DMA_UNMAP_ADDR +#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME +#undef DEFINE_DMA_UNMAP_LEN +#define DEFINE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME +#undef dma_unmap_addr +#define dma_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME) +#undef dma_unmap_addr_set +#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL)) +#undef dma_unmap_len +#define dma_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) +#undef dma_unmap_len_set +#define dma_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) +#endif /* CONFIG_X86_64 && !CONFIG_NEED_DMA_MAP_STATE */ +#endif /* RHEL_RELEASE_CODE */ + +#if (!(RHEL_RELEASE_CODE && \ + (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,8)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0))) || \ + ((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,1)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0)))))) +static inline bool pci_is_pcie(struct pci_dev *dev) +{ + return !!pci_pcie_cap(dev); +} +#endif /* RHEL_RELEASE_CODE */ + +#ifndef __always_unused +#define __always_unused __attribute__((__unused__)) +#endif +#ifndef __maybe_unused +#define __maybe_unused __attribute__((__unused__)) +#endif + +#if (!(RHEL_RELEASE_CODE && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,2)))) +#define sk_tx_queue_get(_sk) (-1) +#define sk_tx_queue_set(_sk, _tx_queue) do {} while(0) +#endif /* !(RHEL >= 6.2) */ + +#if (RHEL_RELEASE_CODE && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,4)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0))) +#define HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT +#define HAVE_ETHTOOL_SET_PHYS_ID +#define HAVE_ETHTOOL_GET_TS_INFO +#endif /* RHEL >= 6.4 && RHEL < 7.0 */ + +#if (RHEL_RELEASE_CODE && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,5)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0))) +#define HAVE_RHEL6_NETDEV_OPS_EXT_FDB +#endif /* RHEL >= 6.5 && RHEL < 7.0 */ + +#else /* < 2.6.33 */ +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef HAVE_NETDEV_OPS_FCOE_GETWWN +#define HAVE_NETDEV_OPS_FCOE_GETWWN +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ +#endif /* < 2.6.33 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34) ) +#if (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0)) +#ifndef pci_num_vf +#define pci_num_vf(pdev) _kc_pci_num_vf(pdev) +extern int _kc_pci_num_vf(struct pci_dev *dev); +#endif +#endif /* RHEL_RELEASE_CODE */ + +#ifndef ETH_FLAG_NTUPLE +#define ETH_FLAG_NTUPLE NETIF_F_NTUPLE +#endif + +#ifndef netdev_mc_count +#define netdev_mc_count(dev) ((dev)->mc_count) +#endif +#ifndef netdev_mc_empty +#define netdev_mc_empty(dev) (netdev_mc_count(dev) == 0) +#endif +#ifndef netdev_for_each_mc_addr +#define netdev_for_each_mc_addr(mclist, dev) \ + for (mclist = dev->mc_list; mclist; mclist = mclist->next) +#endif +#ifndef netdev_uc_count +#define netdev_uc_count(dev) ((dev)->uc.count) +#endif +#ifndef netdev_uc_empty +#define netdev_uc_empty(dev) (netdev_uc_count(dev) == 0) +#endif +#ifndef netdev_for_each_uc_addr +#define netdev_for_each_uc_addr(ha, dev) \ + list_for_each_entry(ha, &dev->uc.list, list) +#endif +#ifndef dma_set_coherent_mask +#define dma_set_coherent_mask(dev,mask) \ + pci_set_consistent_dma_mask(to_pci_dev(dev),(mask)) +#endif +#ifndef pci_dev_run_wake +#define pci_dev_run_wake(pdev) (0) +#endif + +/* netdev logging taken from include/linux/netdevice.h */ +#ifndef netdev_name +static inline const char *_kc_netdev_name(const struct net_device *dev) +{ + if (dev->reg_state != NETREG_REGISTERED) + return "(unregistered net_device)"; + return dev->name; +} +#define netdev_name(netdev) _kc_netdev_name(netdev) +#endif /* netdev_name */ + +#undef netdev_printk +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) +#define netdev_printk(level, netdev, format, args...) \ +do { \ + struct pci_dev *pdev = _kc_netdev_to_pdev(netdev); \ + printk(level "%s: " format, pci_name(pdev), ##args); \ +} while(0) +#elif ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) ) +#define netdev_printk(level, netdev, format, args...) \ +do { \ + struct pci_dev *pdev = _kc_netdev_to_pdev(netdev); \ + struct device *dev = pci_dev_to_dev(pdev); \ + dev_printk(level, dev, "%s: " format, \ + netdev_name(netdev), ##args); \ +} while(0) +#else /* 2.6.21 => 2.6.34 */ +#define netdev_printk(level, netdev, format, args...) \ + dev_printk(level, (netdev)->dev.parent, \ + "%s: " format, \ + netdev_name(netdev), ##args) +#endif /* <2.6.0 <2.6.21 <2.6.34 */ +#undef netdev_emerg +#define netdev_emerg(dev, format, args...) \ + netdev_printk(KERN_EMERG, dev, format, ##args) +#undef netdev_alert +#define netdev_alert(dev, format, args...) \ + netdev_printk(KERN_ALERT, dev, format, ##args) +#undef netdev_crit +#define netdev_crit(dev, format, args...) \ + netdev_printk(KERN_CRIT, dev, format, ##args) +#undef netdev_err +#define netdev_err(dev, format, args...) \ + netdev_printk(KERN_ERR, dev, format, ##args) +#undef netdev_warn +#define netdev_warn(dev, format, args...) \ + netdev_printk(KERN_WARNING, dev, format, ##args) +#undef netdev_notice +#define netdev_notice(dev, format, args...) \ + netdev_printk(KERN_NOTICE, dev, format, ##args) +#undef netdev_info +#define netdev_info(dev, format, args...) \ + netdev_printk(KERN_INFO, dev, format, ##args) +#undef netdev_dbg +#if defined(DEBUG) +#define netdev_dbg(__dev, format, args...) \ + netdev_printk(KERN_DEBUG, __dev, format, ##args) +#elif defined(CONFIG_DYNAMIC_DEBUG) +#define netdev_dbg(__dev, format, args...) \ +do { \ + dynamic_dev_dbg((__dev)->dev.parent, "%s: " format, \ + netdev_name(__dev), ##args); \ +} while (0) +#else /* DEBUG */ +#define netdev_dbg(__dev, format, args...) \ +({ \ + if (0) \ + netdev_printk(KERN_DEBUG, __dev, format, ##args); \ + 0; \ +}) +#endif /* DEBUG */ + +#undef netif_printk +#define netif_printk(priv, type, level, dev, fmt, args...) \ +do { \ + if (netif_msg_##type(priv)) \ + netdev_printk(level, (dev), fmt, ##args); \ +} while (0) + +#undef netif_emerg +#define netif_emerg(priv, type, dev, fmt, args...) \ + netif_level(emerg, priv, type, dev, fmt, ##args) +#undef netif_alert +#define netif_alert(priv, type, dev, fmt, args...) \ + netif_level(alert, priv, type, dev, fmt, ##args) +#undef netif_crit +#define netif_crit(priv, type, dev, fmt, args...) \ + netif_level(crit, priv, type, dev, fmt, ##args) +#undef netif_err +#define netif_err(priv, type, dev, fmt, args...) \ + netif_level(err, priv, type, dev, fmt, ##args) +#undef netif_warn +#define netif_warn(priv, type, dev, fmt, args...) \ + netif_level(warn, priv, type, dev, fmt, ##args) +#undef netif_notice +#define netif_notice(priv, type, dev, fmt, args...) \ + netif_level(notice, priv, type, dev, fmt, ##args) +#undef netif_info +#define netif_info(priv, type, dev, fmt, args...) \ + netif_level(info, priv, type, dev, fmt, ##args) +#undef netif_dbg +#define netif_dbg(priv, type, dev, fmt, args...) \ + netif_level(dbg, priv, type, dev, fmt, ##args) + +#ifdef SET_SYSTEM_SLEEP_PM_OPS +#define HAVE_SYSTEM_SLEEP_PM_OPS +#endif + +#ifndef for_each_set_bit +#define for_each_set_bit(bit, addr, size) \ + for ((bit) = find_first_bit((addr), (size)); \ + (bit) < (size); \ + (bit) = find_next_bit((addr), (size), (bit) + 1)) +#endif /* for_each_set_bit */ + +#ifndef DEFINE_DMA_UNMAP_ADDR +#define DEFINE_DMA_UNMAP_ADDR DECLARE_PCI_UNMAP_ADDR +#define DEFINE_DMA_UNMAP_LEN DECLARE_PCI_UNMAP_LEN +#define dma_unmap_addr pci_unmap_addr +#define dma_unmap_addr_set pci_unmap_addr_set +#define dma_unmap_len pci_unmap_len +#define dma_unmap_len_set pci_unmap_len_set +#endif /* DEFINE_DMA_UNMAP_ADDR */ + +#if (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,3)) +#ifdef IGB_HWMON +#ifdef CONFIG_DEBUG_LOCK_ALLOC +#define sysfs_attr_init(attr) \ + do { \ + static struct lock_class_key __key; \ + (attr)->key = &__key; \ + } while (0) +#else +#define sysfs_attr_init(attr) do {} while (0) +#endif /* CONFIG_DEBUG_LOCK_ALLOC */ +#endif /* IGB_HWMON */ +#endif /* RHEL_RELEASE_CODE */ + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) +static inline bool _kc_pm_runtime_suspended() +{ + return false; +} +#define pm_runtime_suspended(dev) _kc_pm_runtime_suspended() +#else /* 2.6.0 => 2.6.34 */ +static inline bool _kc_pm_runtime_suspended(struct device *dev) +{ + return false; +} +#ifndef pm_runtime_suspended +#define pm_runtime_suspended(dev) _kc_pm_runtime_suspended(dev) +#endif +#endif /* 2.6.0 => 2.6.34 */ + +#else /* < 2.6.34 */ +#define HAVE_SYSTEM_SLEEP_PM_OPS +#ifndef HAVE_SET_RX_MODE +#define HAVE_SET_RX_MODE +#endif + +#endif /* < 2.6.34 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) ) + +ssize_t _kc_simple_write_to_buffer(void *to, size_t available, loff_t *ppos, + const void __user *from, size_t count); +#define simple_write_to_buffer _kc_simple_write_to_buffer + +#ifndef numa_node_id +#define numa_node_id() 0 +#endif +#ifdef HAVE_TX_MQ +#include <net/sch_generic.h> +#ifndef CONFIG_NETDEVICES_MULTIQUEUE +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0))) +void _kc_netif_set_real_num_tx_queues(struct net_device *, unsigned int); +#define netif_set_real_num_tx_queues _kc_netif_set_real_num_tx_queues +#endif /* !(RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0)) */ +#else /* CONFIG_NETDEVICES_MULTI_QUEUE */ +#define netif_set_real_num_tx_queues(_netdev, _count) \ + do { \ + (_netdev)->egress_subqueue_count = _count; \ + } while (0) +#endif /* CONFIG_NETDEVICES_MULTI_QUEUE */ +#else /* HAVE_TX_MQ */ +#define netif_set_real_num_tx_queues(_netdev, _count) do {} while(0) +#endif /* HAVE_TX_MQ */ +#ifndef ETH_FLAG_RXHASH +#define ETH_FLAG_RXHASH (1<<28) +#endif /* ETH_FLAG_RXHASH */ +#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0)) +#define HAVE_IRQ_AFFINITY_HINT +#endif +#else /* < 2.6.35 */ +#define HAVE_PM_QOS_REQUEST_LIST +#define HAVE_IRQ_AFFINITY_HINT +#endif /* < 2.6.35 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36) ) +extern int _kc_ethtool_op_set_flags(struct net_device *, u32, u32); +#define ethtool_op_set_flags _kc_ethtool_op_set_flags +extern u32 _kc_ethtool_op_get_flags(struct net_device *); +#define ethtool_op_get_flags _kc_ethtool_op_get_flags + +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +#ifdef NET_IP_ALIGN +#undef NET_IP_ALIGN +#endif +#define NET_IP_ALIGN 0 +#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */ + +#ifdef NET_SKB_PAD +#undef NET_SKB_PAD +#endif + +#if (L1_CACHE_BYTES > 32) +#define NET_SKB_PAD L1_CACHE_BYTES +#else +#define NET_SKB_PAD 32 +#endif + +static inline struct sk_buff *_kc_netdev_alloc_skb_ip_align(struct net_device *dev, + unsigned int length) +{ + struct sk_buff *skb; + + skb = alloc_skb(length + NET_SKB_PAD + NET_IP_ALIGN, GFP_ATOMIC); + if (skb) { +#if (NET_IP_ALIGN + NET_SKB_PAD) + skb_reserve(skb, NET_IP_ALIGN + NET_SKB_PAD); +#endif + skb->dev = dev; + } + return skb; +} + +#ifdef netdev_alloc_skb_ip_align +#undef netdev_alloc_skb_ip_align +#endif +#define netdev_alloc_skb_ip_align(n, l) _kc_netdev_alloc_skb_ip_align(n, l) + +#undef netif_level +#define netif_level(level, priv, type, dev, fmt, args...) \ +do { \ + if (netif_msg_##type(priv)) \ + netdev_##level(dev, fmt, ##args); \ +} while (0) + +#undef usleep_range +#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000)) + +#define u64_stats_update_begin(a) do { } while(0) +#define u64_stats_update_end(a) do { } while(0) +#define u64_stats_fetch_begin(a) do { } while(0) +#define u64_stats_fetch_retry_bh(a) (0) +#define u64_stats_fetch_begin_bh(a) (0) + +#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,1)) +#define HAVE_8021P_SUPPORT +#endif + +#else /* < 2.6.36 */ + + +#define HAVE_PM_QOS_REQUEST_ACTIVE +#define HAVE_8021P_SUPPORT +#define HAVE_NDO_GET_STATS64 +#endif /* < 2.6.36 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) ) +#ifndef netif_set_real_num_rx_queues +static inline int __kc_netif_set_real_num_rx_queues(struct net_device *dev, + unsigned int rxq) +{ + return 0; +} +#define netif_set_real_num_rx_queues(dev, rxq) \ + __kc_netif_set_real_num_rx_queues((dev), (rxq)) +#endif +#ifndef ETHTOOL_RXNTUPLE_ACTION_CLEAR +#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) +#endif +#ifndef VLAN_N_VID +#define VLAN_N_VID VLAN_GROUP_ARRAY_LEN +#endif /* VLAN_N_VID */ +#ifndef ETH_FLAG_TXVLAN +#define ETH_FLAG_TXVLAN (1 << 7) +#endif /* ETH_FLAG_TXVLAN */ +#ifndef ETH_FLAG_RXVLAN +#define ETH_FLAG_RXVLAN (1 << 8) +#endif /* ETH_FLAG_RXVLAN */ + +static inline void _kc_skb_checksum_none_assert(struct sk_buff *skb) +{ + WARN_ON(skb->ip_summed != CHECKSUM_NONE); +} +#define skb_checksum_none_assert(skb) _kc_skb_checksum_none_assert(skb) + +static inline void *_kc_vzalloc_node(unsigned long size, int node) +{ + void *addr = vmalloc_node(size, node); + if (addr) + memset(addr, 0, size); + return addr; +} +#define vzalloc_node(_size, _node) _kc_vzalloc_node(_size, _node) + +static inline void *_kc_vzalloc(unsigned long size) +{ + void *addr = vmalloc(size); + if (addr) + memset(addr, 0, size); + return addr; +} +#define vzalloc(_size) _kc_vzalloc(_size) + +#ifndef vlan_get_protocol +static inline __be16 __kc_vlan_get_protocol(const struct sk_buff *skb) +{ + if (vlan_tx_tag_present(skb) || + skb->protocol != cpu_to_be16(ETH_P_8021Q)) + return skb->protocol; + + if (skb_headlen(skb) < sizeof(struct vlan_ethhdr)) + return 0; + + return ((struct vlan_ethhdr*)skb->data)->h_vlan_encapsulated_proto; +} +#define vlan_get_protocol(_skb) __kc_vlan_get_protocol(_skb) +#endif +#ifdef HAVE_HW_TIME_STAMP +#define SKBTX_HW_TSTAMP (1 << 0) +#define SKBTX_IN_PROGRESS (1 << 2) +#define SKB_SHARED_TX_IS_UNION +#endif + +#ifndef device_wakeup_enable +#define device_wakeup_enable(dev) device_set_wakeup_enable(dev, true) +#endif + +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,4,18) ) +#ifndef HAVE_VLAN_RX_REGISTER +#define HAVE_VLAN_RX_REGISTER +#endif +#endif /* > 2.4.18 */ +#endif /* < 2.6.37 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) ) +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ) +#define skb_checksum_start_offset(skb) skb_transport_offset(skb) +#else /* 2.6.22 -> 2.6.37 */ +static inline int _kc_skb_checksum_start_offset(const struct sk_buff *skb) +{ + return skb->csum_start - skb_headroom(skb); +} +#define skb_checksum_start_offset(skb) _kc_skb_checksum_start_offset(skb) +#endif /* 2.6.22 -> 2.6.37 */ +#ifdef CONFIG_DCB +#ifndef IEEE_8021QAZ_MAX_TCS +#define IEEE_8021QAZ_MAX_TCS 8 +#endif +#ifndef DCB_CAP_DCBX_HOST +#define DCB_CAP_DCBX_HOST 0x01 +#endif +#ifndef DCB_CAP_DCBX_LLD_MANAGED +#define DCB_CAP_DCBX_LLD_MANAGED 0x02 +#endif +#ifndef DCB_CAP_DCBX_VER_CEE +#define DCB_CAP_DCBX_VER_CEE 0x04 +#endif +#ifndef DCB_CAP_DCBX_VER_IEEE +#define DCB_CAP_DCBX_VER_IEEE 0x08 +#endif +#ifndef DCB_CAP_DCBX_STATIC +#define DCB_CAP_DCBX_STATIC 0x10 +#endif +#endif /* CONFIG_DCB */ +#if (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,2)) +#define CONFIG_XPS +#endif /* RHEL_RELEASE_VERSION(6,2) */ +#endif /* < 2.6.38 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39) ) +#ifndef NETIF_F_RXCSUM +#define NETIF_F_RXCSUM (1 << 29) +#endif +#ifndef skb_queue_reverse_walk_safe +#define skb_queue_reverse_walk_safe(queue, skb, tmp) \ + for (skb = (queue)->prev, tmp = skb->prev; \ + skb != (struct sk_buff *)(queue); \ + skb = tmp, tmp = skb->prev) +#endif +#else /* < 2.6.39 */ +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef HAVE_NETDEV_OPS_FCOE_DDP_TARGET +#define HAVE_NETDEV_OPS_FCOE_DDP_TARGET +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ +#ifndef HAVE_MQPRIO +#define HAVE_MQPRIO +#endif +#ifndef HAVE_SETUP_TC +#define HAVE_SETUP_TC +#endif +#ifdef CONFIG_DCB +#ifndef HAVE_DCBNL_IEEE +#define HAVE_DCBNL_IEEE +#endif +#endif /* CONFIG_DCB */ +#ifndef HAVE_NDO_SET_FEATURES +#define HAVE_NDO_SET_FEATURES +#endif +#endif /* < 2.6.39 */ + +/*****************************************************************************/ +/* use < 2.6.40 because of a Fedora 15 kernel update where they + * updated the kernel version to 2.6.40.x and they back-ported 3.0 features + * like set_phys_id for ethtool. + */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,40) ) +#ifdef ETHTOOL_GRXRINGS +#ifndef FLOW_EXT +#define FLOW_EXT 0x80000000 +union _kc_ethtool_flow_union { + struct ethtool_tcpip4_spec tcp_ip4_spec; + struct ethtool_usrip4_spec usr_ip4_spec; + __u8 hdata[60]; +}; +struct _kc_ethtool_flow_ext { + __be16 vlan_etype; + __be16 vlan_tci; + __be32 data[2]; +}; +struct _kc_ethtool_rx_flow_spec { + __u32 flow_type; + union _kc_ethtool_flow_union h_u; + struct _kc_ethtool_flow_ext h_ext; + union _kc_ethtool_flow_union m_u; + struct _kc_ethtool_flow_ext m_ext; + __u64 ring_cookie; + __u32 location; +}; +#define ethtool_rx_flow_spec _kc_ethtool_rx_flow_spec +#endif /* FLOW_EXT */ +#endif + +#define pci_disable_link_state_locked pci_disable_link_state + +#ifndef PCI_LTR_VALUE_MASK +#define PCI_LTR_VALUE_MASK 0x000003ff +#endif +#ifndef PCI_LTR_SCALE_MASK +#define PCI_LTR_SCALE_MASK 0x00001c00 +#endif +#ifndef PCI_LTR_SCALE_SHIFT +#define PCI_LTR_SCALE_SHIFT 10 +#endif + +#else /* < 2.6.40 */ +#define HAVE_ETHTOOL_SET_PHYS_ID +#endif /* < 2.6.40 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0) ) +#define USE_LEGACY_PM_SUPPORT +#endif /* < 3.0.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0) ) +#ifndef __netdev_alloc_skb_ip_align +#define __netdev_alloc_skb_ip_align(d,l,_g) netdev_alloc_skb_ip_align(d,l) +#endif /* __netdev_alloc_skb_ip_align */ +#define dcb_ieee_setapp(dev, app) dcb_setapp(dev, app) +#define dcb_ieee_delapp(dev, app) 0 +#define dcb_ieee_getapp_mask(dev, app) (1 << app->priority) + +/* 1000BASE-T Control register */ +#define CTL1000_AS_MASTER 0x0800 +#define CTL1000_ENABLE_MASTER 0x1000 + +#else /* < 3.1.0 */ +#ifndef HAVE_DCBNL_IEEE_DELAPP +#define HAVE_DCBNL_IEEE_DELAPP +#endif +#endif /* < 3.1.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) ) +#ifdef ETHTOOL_GRXRINGS +#define HAVE_ETHTOOL_GET_RXNFC_VOID_RULE_LOCS +#endif /* ETHTOOL_GRXRINGS */ + +#ifndef skb_frag_size +#define skb_frag_size(frag) _kc_skb_frag_size(frag) +static inline unsigned int _kc_skb_frag_size(const skb_frag_t *frag) +{ + return frag->size; +} +#endif /* skb_frag_size */ + +#ifndef skb_frag_size_sub +#define skb_frag_size_sub(frag, delta) _kc_skb_frag_size_sub(frag, delta) +static inline void _kc_skb_frag_size_sub(skb_frag_t *frag, int delta) +{ + frag->size -= delta; +} +#endif /* skb_frag_size_sub */ + +#ifndef skb_frag_page +#define skb_frag_page(frag) _kc_skb_frag_page(frag) +static inline struct page *_kc_skb_frag_page(const skb_frag_t *frag) +{ + return frag->page; +} +#endif /* skb_frag_page */ + +#ifndef skb_frag_address +#define skb_frag_address(frag) _kc_skb_frag_address(frag) +static inline void *_kc_skb_frag_address(const skb_frag_t *frag) +{ + return page_address(skb_frag_page(frag)) + frag->page_offset; +} +#endif /* skb_frag_address */ + +#ifndef skb_frag_dma_map +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) +#include <linux/dma-mapping.h> +#endif +#define skb_frag_dma_map(dev,frag,offset,size,dir) \ + _kc_skb_frag_dma_map(dev,frag,offset,size,dir) +static inline dma_addr_t _kc_skb_frag_dma_map(struct device *dev, + const skb_frag_t *frag, + size_t offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_page(dev, skb_frag_page(frag), + frag->page_offset + offset, size, dir); +} +#endif /* skb_frag_dma_map */ + +#ifndef __skb_frag_unref +#define __skb_frag_unref(frag) __kc_skb_frag_unref(frag) +static inline void __kc_skb_frag_unref(skb_frag_t *frag) +{ + put_page(skb_frag_page(frag)); +} +#endif /* __skb_frag_unref */ + +#ifndef SPEED_UNKNOWN +#define SPEED_UNKNOWN -1 +#endif +#ifndef DUPLEX_UNKNOWN +#define DUPLEX_UNKNOWN 0xff +#endif +#if (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,3)) +#ifndef HAVE_PCI_DEV_FLAGS_ASSIGNED +#define HAVE_PCI_DEV_FLAGS_ASSIGNED +#endif +#endif +#else /* < 3.2.0 */ +#ifndef HAVE_PCI_DEV_FLAGS_ASSIGNED +#define HAVE_PCI_DEV_FLAGS_ASSIGNED +#define HAVE_VF_SPOOFCHK_CONFIGURE +#endif +#endif /* < 3.2.0 */ + +#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE == RHEL_RELEASE_VERSION(6,2)) +#undef ixgbe_get_netdev_tc_txq +#define ixgbe_get_netdev_tc_txq(dev, tc) (&netdev_extended(dev)->qos_data.tc_to_txq[tc]) +#endif +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0) ) +typedef u32 kni_netdev_features_t; +#undef PCI_EXP_TYPE_RC_EC +#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ +#ifndef CONFIG_BQL +#define netdev_tx_completed_queue(_q, _p, _b) do {} while (0) +#define netdev_completed_queue(_n, _p, _b) do {} while (0) +#define netdev_tx_sent_queue(_q, _b) do {} while (0) +#define netdev_sent_queue(_n, _b) do {} while (0) +#define netdev_tx_reset_queue(_q) do {} while (0) +#define netdev_reset_queue(_n) do {} while (0) +#endif +#else /* ! < 3.3.0 */ +typedef netdev_features_t kni_netdev_features_t; +#define HAVE_INT_NDO_VLAN_RX_ADD_VID +#ifdef ETHTOOL_SRXNTUPLE +#undef ETHTOOL_SRXNTUPLE +#endif +#endif /* < 3.3.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0) ) +#ifndef NETIF_F_RXFCS +#define NETIF_F_RXFCS 0 +#endif /* NETIF_F_RXFCS */ +#ifndef NETIF_F_RXALL +#define NETIF_F_RXALL 0 +#endif /* NETIF_F_RXALL */ + +#if !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) +#define NUMTCS_RETURNS_U8 + +int _kc_simple_open(struct inode *inode, struct file *file); +#define simple_open _kc_simple_open +#endif /* !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) */ + + +#ifndef skb_add_rx_frag +#define skb_add_rx_frag _kc_skb_add_rx_frag +extern void _kc_skb_add_rx_frag(struct sk_buff *, int, struct page *, + int, int, unsigned int); +#endif +#ifdef NET_ADDR_RANDOM +#define eth_hw_addr_random(N) do { \ + random_ether_addr(N->dev_addr); \ + N->addr_assign_type |= NET_ADDR_RANDOM; \ + } while (0) +#else /* NET_ADDR_RANDOM */ +#define eth_hw_addr_random(N) random_ether_addr(N->dev_addr) +#endif /* NET_ADDR_RANDOM */ +#else /* < 3.4.0 */ +#include <linux/kconfig.h> +#endif /* >= 3.4.0 */ + +/*****************************************************************************/ +#if defined(E1000E_PTP) || defined(IGB_PTP) || defined(IXGBE_PTP) || defined(I40E_PTP) +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(3,0,0) ) && IS_ENABLED(CONFIG_PTP_1588_CLOCK) +#define HAVE_PTP_1588_CLOCK +#else +#error Cannot enable PTP Hardware Clock support due to a pre-3.0 kernel version or CONFIG_PTP_1588_CLOCK not enabled in the kernel +#endif /* > 3.0.0 && IS_ENABLED(CONFIG_PTP_1588_CLOCK) */ +#endif /* E1000E_PTP || IGB_PTP || IXGBE_PTP || I40E_PTP */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,5,0) ) +#define skb_tx_timestamp(skb) do {} while (0) +static inline bool __kc_ether_addr_equal(const u8 *addr1, const u8 *addr2) +{ + return !compare_ether_addr(addr1, addr2); +} +#define ether_addr_equal(_addr1, _addr2) __kc_ether_addr_equal((_addr1),(_addr2)) +#else +#define HAVE_FDB_OPS +#define HAVE_ETHTOOL_GET_TS_INFO +#endif /* < 3.5.0 */ + +/*****************************************************************************/ +#include <linux/mdio.h> +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,6,0) ) +#define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */ + +#ifndef MDIO_EEE_100TX +#define MDIO_EEE_100TX 0x0002 /* 100TX EEE cap */ +#endif +#ifndef MDIO_EEE_1000T +#define MDIO_EEE_1000T 0x0004 /* 1000T EEE cap */ +#endif +#ifndef MDIO_EEE_10GT +#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */ +#endif +#ifndef MDIO_EEE_1000KX +#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ +#endif +#ifndef MDIO_EEE_10GKX4 +#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ +#endif +#ifndef MDIO_EEE_10GKR +#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ +#endif +#endif /* < 3.6.0 */ + +/******************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,7,0) ) +#ifndef ADVERTISED_40000baseKR4_Full +/* these defines were all added in one commit, so should be safe + * to trigger activiation on one define + */ +#define SUPPORTED_40000baseKR4_Full (1 << 23) +#define SUPPORTED_40000baseCR4_Full (1 << 24) +#define SUPPORTED_40000baseSR4_Full (1 << 25) +#define SUPPORTED_40000baseLR4_Full (1 << 26) +#define ADVERTISED_40000baseKR4_Full (1 << 23) +#define ADVERTISED_40000baseCR4_Full (1 << 24) +#define ADVERTISED_40000baseSR4_Full (1 << 25) +#define ADVERTISED_40000baseLR4_Full (1 << 26) +#endif + +/** + * mmd_eee_cap_to_ethtool_sup_t + * @eee_cap: value of the MMD EEE Capability register + * + * A small helper function that translates MMD EEE Capability (3.20) bits + * to ethtool supported settings. + */ +static inline u32 __kc_mmd_eee_cap_to_ethtool_sup_t(u16 eee_cap) +{ + u32 supported = 0; + + if (eee_cap & MDIO_EEE_100TX) + supported |= SUPPORTED_100baseT_Full; + if (eee_cap & MDIO_EEE_1000T) + supported |= SUPPORTED_1000baseT_Full; + if (eee_cap & MDIO_EEE_10GT) + supported |= SUPPORTED_10000baseT_Full; + if (eee_cap & MDIO_EEE_1000KX) + supported |= SUPPORTED_1000baseKX_Full; + if (eee_cap & MDIO_EEE_10GKX4) + supported |= SUPPORTED_10000baseKX4_Full; + if (eee_cap & MDIO_EEE_10GKR) + supported |= SUPPORTED_10000baseKR_Full; + + return supported; +} +#define mmd_eee_cap_to_ethtool_sup_t(eee_cap) \ + __kc_mmd_eee_cap_to_ethtool_sup_t(eee_cap) + +/** + * mmd_eee_adv_to_ethtool_adv_t + * @eee_adv: value of the MMD EEE Advertisement/Link Partner Ability registers + * + * A small helper function that translates the MMD EEE Advertisement (7.60) + * and MMD EEE Link Partner Ability (7.61) bits to ethtool advertisement + * settings. + */ +static inline u32 __kc_mmd_eee_adv_to_ethtool_adv_t(u16 eee_adv) +{ + u32 adv = 0; + + if (eee_adv & MDIO_EEE_100TX) + adv |= ADVERTISED_100baseT_Full; + if (eee_adv & MDIO_EEE_1000T) + adv |= ADVERTISED_1000baseT_Full; + if (eee_adv & MDIO_EEE_10GT) + adv |= ADVERTISED_10000baseT_Full; + if (eee_adv & MDIO_EEE_1000KX) + adv |= ADVERTISED_1000baseKX_Full; + if (eee_adv & MDIO_EEE_10GKX4) + adv |= ADVERTISED_10000baseKX4_Full; + if (eee_adv & MDIO_EEE_10GKR) + adv |= ADVERTISED_10000baseKR_Full; + + return adv; +} +#define mmd_eee_adv_to_ethtool_adv_t(eee_adv) \ + __kc_mmd_eee_adv_to_ethtool_adv_t(eee_adv) + +/** + * ethtool_adv_to_mmd_eee_adv_t + * @adv: the ethtool advertisement settings + * + * A small helper function that translates ethtool advertisement settings + * to EEE advertisements for the MMD EEE Advertisement (7.60) and + * MMD EEE Link Partner Ability (7.61) registers. + */ +static inline u16 __kc_ethtool_adv_to_mmd_eee_adv_t(u32 adv) +{ + u16 reg = 0; + + if (adv & ADVERTISED_100baseT_Full) + reg |= MDIO_EEE_100TX; + if (adv & ADVERTISED_1000baseT_Full) + reg |= MDIO_EEE_1000T; + if (adv & ADVERTISED_10000baseT_Full) + reg |= MDIO_EEE_10GT; + if (adv & ADVERTISED_1000baseKX_Full) + reg |= MDIO_EEE_1000KX; + if (adv & ADVERTISED_10000baseKX4_Full) + reg |= MDIO_EEE_10GKX4; + if (adv & ADVERTISED_10000baseKR_Full) + reg |= MDIO_EEE_10GKR; + + return reg; +} +#define ethtool_adv_to_mmd_eee_adv_t(adv) \ + __kc_ethtool_adv_to_mmd_eee_adv_t(adv) + +#ifndef pci_pcie_type +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ) +static inline u8 pci_pcie_type(struct pci_dev *pdev) +{ + int pos; + u16 reg16; + + pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); + if (!pos) + BUG(); + pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); + return (reg16 & PCI_EXP_FLAGS_TYPE) >> 4; +} +#else /* < 2.6.24 */ +#define pci_pcie_type(x) (x)->pcie_type +#endif /* < 2.6.24 */ +#endif /* pci_pcie_type */ + +#define ptp_clock_register(caps, args...) ptp_clock_register(caps) + +#ifndef PCI_EXP_LNKSTA2 +int __kc_pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val); +#define pcie_capability_read_word(d,p,v) __kc_pcie_capability_read_word(d,p,v) +int __kc_pcie_capability_write_word(struct pci_dev *dev, int pos, u16 val); +#define pcie_capability_write_word(d,p,v) __kc_pcie_capability_write_word(d,p,v) +int __kc_pcie_capability_clear_and_set_word(struct pci_dev *dev, int pos, + u16 clear, u16 set); +#define pcie_capability_clear_and_set_word(d,p,c,s) \ + __kc_pcie_capability_clear_and_set_word(d,p,c,s) + +#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ + +static inline int pcie_capability_clear_word(struct pci_dev *dev, int pos, + u16 clear) +{ + return __kc_pcie_capability_clear_and_set_word(dev, pos, clear, 0); +} +#endif /* !PCI_EXP_LNKSTA2 */ + +#if (SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) +#define USE_CONST_DEV_UC_CHAR +#endif + +#else /* >= 3.7.0 */ +#define HAVE_CONST_STRUCT_PCI_ERROR_HANDLERS +#define USE_CONST_DEV_UC_CHAR +#endif /* >= 3.7.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0) ) +#ifndef PCI_EXP_LNKCTL_ASPM_L0S +#define PCI_EXP_LNKCTL_ASPM_L0S 0x01 /* L0s Enable */ +#endif +#ifndef PCI_EXP_LNKCTL_ASPM_L1 +#define PCI_EXP_LNKCTL_ASPM_L1 0x02 /* L1 Enable */ +#endif +#define HAVE_CONFIG_HOTPLUG +/* Reserved Ethernet Addresses per IEEE 802.1Q */ +static const u8 eth_reserved_addr_base[ETH_ALEN] __aligned(2) = { + 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 }; +#if !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) &&\ + !(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,5)) +static inline bool is_link_local_ether_addr(const u8 *addr) +{ + __be16 *a = (__be16 *)addr; + static const __be16 *b = (const __be16 *)eth_reserved_addr_base; + static const __be16 m = cpu_to_be16(0xfff0); + + return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | ((a[2] ^ b[2]) & m)) == 0; +} +#endif /* !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) */ +#else /* >= 3.8.0 */ +#ifndef __devinit +#define __devinit +#define HAVE_ENCAP_CSUM_OFFLOAD +#endif + +#ifndef __devinitdata +#define __devinitdata +#endif + +#ifndef __devexit +#define __devexit +#endif + +#ifndef __devexit_p +#define __devexit_p +#endif + +#ifndef HAVE_SRIOV_CONFIGURE +#define HAVE_SRIOV_CONFIGURE +#endif + +#define HAVE_BRIDGE_ATTRIBS +#ifndef BRIDGE_MODE_VEB +#define BRIDGE_MODE_VEB 0 /* Default loopback mode */ +#endif /* BRIDGE_MODE_VEB */ +#ifndef BRIDGE_MODE_VEPA +#define BRIDGE_MODE_VEPA 1 /* 802.1Qbg defined VEPA mode */ +#endif /* BRIDGE_MODE_VEPA */ +#endif /* >= 3.8.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,9,0) ) + +#undef hlist_entry +#define hlist_entry(ptr, type, member) container_of(ptr,type,member) + +#undef hlist_entry_safe +#define hlist_entry_safe(ptr, type, member) \ + (ptr) ? hlist_entry(ptr, type, member) : NULL + +#undef hlist_for_each_entry +#define hlist_for_each_entry(pos, head, member) \ + for (pos = hlist_entry_safe((head)->first, typeof(*(pos)), member); \ + pos; \ + pos = hlist_entry_safe((pos)->member.next, typeof(*(pos)), member)) + +#undef hlist_for_each_entry_safe +#define hlist_for_each_entry_safe(pos, n, head, member) \ + for (pos = hlist_entry_safe((head)->first, typeof(*pos), member); \ + pos && ({ n = pos->member.next; 1; }); \ + pos = hlist_entry_safe(n, typeof(*pos), member)) + +#ifdef CONFIG_XPS +extern int __kc_netif_set_xps_queue(struct net_device *, struct cpumask *, u16); +#define netif_set_xps_queue(_dev, _mask, _idx) __kc_netif_set_xps_queue((_dev), (_mask), (_idx)) +#else /* CONFIG_XPS */ +#define netif_set_xps_queue(_dev, _mask, _idx) do {} while (0) +#endif /* CONFIG_XPS */ + +#ifdef HAVE_NETDEV_SELECT_QUEUE +#define _kc_hashrnd 0xd631614b /* not so random hash salt */ +extern u16 __kc_netdev_pick_tx(struct net_device *dev, struct sk_buff *skb); +#define __netdev_pick_tx __kc_netdev_pick_tx +#endif /* HAVE_NETDEV_SELECT_QUEUE */ +#else +#define HAVE_BRIDGE_FILTER +#define USE_DEFAULT_FDB_DEL_DUMP +#endif /* < 3.9.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ) +#ifdef CONFIG_PCI_IOV +extern int __kc_pci_vfs_assigned(struct pci_dev *dev); +#else +static inline int __kc_pci_vfs_assigned(struct pci_dev *dev) +{ + return 0; +} +#endif +#define pci_vfs_assigned(dev) __kc_pci_vfs_assigned(dev) + +#ifndef VLAN_TX_COOKIE_MAGIC +static inline struct sk_buff *__kc__vlan_hwaccel_put_tag(struct sk_buff *skb, + u16 vlan_tci) +{ +#ifdef VLAN_TAG_PRESENT + vlan_tci |= VLAN_TAG_PRESENT; +#endif + skb->vlan_tci = vlan_tci; + return skb; +} +#define __vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci) \ + __kc__vlan_hwaccel_put_tag(skb, vlan_tci) +#endif + +#else /* >= 3.10.0 */ +#define HAVE_ENCAP_TSO_OFFLOAD +#endif /* >= 3.10.0 */ + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,14,0) ) +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,6))) +#if (!(UBUNTU_KERNEL_CODE >= UBUNTU_KERNEL_VERSION(3,13,0,30,0) \ + && (UBUNTU_RELEASE_CODE == UBUNTU_RELEASE_VERSION(12,4) \ + || UBUNTU_RELEASE_CODE == UBUNTU_RELEASE_VERSION(14,4)))) +#if (!(SLE_VERSION_CODE == SLE_VERSION(12,0,0))) +#ifdef NETIF_F_RXHASH +#define PKT_HASH_TYPE_L3 0 +static inline void +skb_set_hash(struct sk_buff *skb, __u32 hash, __always_unused int type) +{ + skb->rxhash = hash; +} +#endif /* NETIF_F_RXHASH */ +#endif /* < SLES12 */ +#endif /* < 3.13.0-30.54 (Ubuntu 14.04) */ +#endif /* < RHEL7 */ +#endif /* < 3.14.0 */ + +#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(3,16,0) ) \ + || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,2) )) +#undef SET_ETHTOOL_OPS +#define SET_ETHTOOL_OPS(netdev, ops) ((netdev)->ethtool_ops = (ops)) +#define HAVE_VF_MIN_MAX_TXRATE 1 +#endif /* >= 3.16.0 */ + +#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(3,19,0) ) \ + || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,2) )) +#define HAVE_NDO_DFLT_BRIDGE_ADD_MASK +#if ( RHEL_RELEASE_CODE != RHEL_RELEASE_VERSION(7,2) ) +#define HAVE_NDO_FDB_ADD_VID +#endif /* !RHEL 7.2 */ +#endif /* >= 3.19.0 */ + +#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(4,0,0) ) \ + || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,2) )) +/* vlan_tx_xx functions got renamed to skb_vlan */ +#define vlan_tx_tag_get skb_vlan_tag_get +#define vlan_tx_tag_present skb_vlan_tag_present +#if ( RHEL_RELEASE_CODE != RHEL_RELEASE_VERSION(7,2) ) +#define HAVE_NDO_BRIDGE_SET_DEL_LINK_FLAGS +#endif /* !RHEL 7.2 */ +#endif /* 4.0.0 */ + +#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(4,1,0) ) \ + || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,3) )) +/* ndo_bridge_getlink adds new nlflags parameter */ +#define HAVE_NDO_BRIDGE_GETLINK_NLFLAGS +#endif /* >= 4.1.0 */ + +#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(4,2,0) ) \ + || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,4) )) +/* ndo_bridge_getlink adds new filter_mask and vlan_fill parameters */ +#define HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL +#endif /* >= 4.2.0 */ + +/* + * vlan_tx_tag_* macros renamed to skb_vlan_tag_* (Linux commit: df8a39defad4) + * For older kernels backported this commit, need to use renamed functions. + * This fix is specific to RedHat/CentOS kernels. + */ +#if (defined(RHEL_RELEASE_CODE) && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 8)) && \ + (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34))) +#define vlan_tx_tag_get skb_vlan_tag_get +#define vlan_tx_tag_present skb_vlan_tag_present +#endif + +#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(4, 9, 0)) || \ + (SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(12, 3, 0)) || \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7, 4))) +#define HAVE_VF_VLAN_PROTO +#if (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7, 4)) +/* In RHEL/Centos 7.4, the "new" version of ndo_set_vf_vlan + * is in the struct net_device_ops_extended */ +#define ndo_set_vf_vlan extended.ndo_set_vf_vlan +#endif +#endif + +#if (defined(RHEL_RELEASE_CODE) && \ + (RHEL_RELEASE_VERSION(7, 5) <= RHEL_RELEASE_CODE)) +#define ndo_change_mtu ndo_change_mtu_rh74 +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 8, 0) +#define HAVE_PCI_ENABLE_MSIX +#endif + +#if defined(timer_setup) && defined(from_timer) +#define HAVE_TIMER_SETUP +#endif + +#endif /* _KCOMPAT_H_ */ |