diff options
Diffstat (limited to 'kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c')
| -rw-r--r-- | kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c | 1832 |
1 files changed, 1832 insertions, 0 deletions
diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c new file mode 100644 index 00000000..a47a2ff8 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c @@ -0,0 +1,1832 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe_api.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +static void ixgbe_i2c_start(struct ixgbe_hw *hw); +static void ixgbe_i2c_stop(struct ixgbe_hw *hw); +static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data); +static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data); +static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw); +static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data); +static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data); +static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); +static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); +static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data); +static bool ixgbe_get_i2c_data(u32 *i2cctl); + +/** + * ixgbe_init_phy_ops_generic - Inits PHY function ptrs + * @hw: pointer to the hardware structure + * + * Initialize the function pointers. + **/ +s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_phy_info *phy = &hw->phy; + + /* PHY */ + phy->ops.identify = &ixgbe_identify_phy_generic; + phy->ops.reset = &ixgbe_reset_phy_generic; + phy->ops.read_reg = &ixgbe_read_phy_reg_generic; + phy->ops.write_reg = &ixgbe_write_phy_reg_generic; + phy->ops.setup_link = &ixgbe_setup_phy_link_generic; + phy->ops.setup_link_speed = &ixgbe_setup_phy_link_speed_generic; + phy->ops.check_link = NULL; + phy->ops.get_firmware_version = ixgbe_get_phy_firmware_version_generic; + phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_generic; + phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_generic; + phy->ops.read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic; + phy->ops.write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic; + phy->ops.i2c_bus_clear = &ixgbe_i2c_bus_clear; + phy->ops.identify_sfp = &ixgbe_identify_module_generic; + phy->sfp_type = ixgbe_sfp_type_unknown; + phy->ops.check_overtemp = &ixgbe_tn_check_overtemp; + return 0; +} + +/** + * ixgbe_identify_phy_generic - Get physical layer module + * @hw: pointer to hardware structure + * + * Determines the physical layer module found on the current adapter. + **/ +s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u32 phy_addr; + u16 ext_ability = 0; + + if (hw->phy.type == ixgbe_phy_unknown) { + for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { + if (ixgbe_validate_phy_addr(hw, phy_addr)) { + hw->phy.addr = phy_addr; + ixgbe_get_phy_id(hw); + hw->phy.type = + ixgbe_get_phy_type_from_id(hw->phy.id); + + if (hw->phy.type == ixgbe_phy_unknown) { + hw->phy.ops.read_reg(hw, + IXGBE_MDIO_PHY_EXT_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &ext_ability); + if (ext_ability & + (IXGBE_MDIO_PHY_10GBASET_ABILITY | + IXGBE_MDIO_PHY_1000BASET_ABILITY)) + hw->phy.type = + ixgbe_phy_cu_unknown; + else + hw->phy.type = + ixgbe_phy_generic; + } + + status = 0; + break; + } + } + /* clear value if nothing found */ + if (status != 0) + hw->phy.addr = 0; + } else { + status = 0; + } + + return status; +} + +/** + * ixgbe_validate_phy_addr - Determines phy address is valid + * @hw: pointer to hardware structure + * + **/ +bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr) +{ + u16 phy_id = 0; + bool valid = false; + + hw->phy.addr = phy_addr; + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id); + + if (phy_id != 0xFFFF && phy_id != 0x0) + valid = true; + + return valid; +} + +/** + * ixgbe_get_phy_id - Get the phy type + * @hw: pointer to hardware structure + * + **/ +s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) +{ + u32 status; + u16 phy_id_high = 0; + u16 phy_id_low = 0; + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &phy_id_high); + + if (status == 0) { + hw->phy.id = (u32)(phy_id_high << 16); + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &phy_id_low); + hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK); + hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK); + } + return status; +} + +/** + * ixgbe_get_phy_type_from_id - Get the phy type + * @hw: pointer to hardware structure + * + **/ +enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) +{ + enum ixgbe_phy_type phy_type; + + switch (phy_id) { + case TN1010_PHY_ID: + phy_type = ixgbe_phy_tn; + break; + case X540_PHY_ID: + phy_type = ixgbe_phy_aq; + break; + case QT2022_PHY_ID: + phy_type = ixgbe_phy_qt; + break; + case ATH_PHY_ID: + phy_type = ixgbe_phy_nl; + break; + default: + phy_type = ixgbe_phy_unknown; + break; + } + + hw_dbg(hw, "phy type found is %d\n", phy_type); + return phy_type; +} + +/** + * ixgbe_reset_phy_generic - Performs a PHY reset + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) +{ + u32 i; + u16 ctrl = 0; + s32 status = 0; + + if (hw->phy.type == ixgbe_phy_unknown) + status = ixgbe_identify_phy_generic(hw); + + if (status != 0 || hw->phy.type == ixgbe_phy_none) + goto out; + + /* Don't reset PHY if it's shut down due to overtemp. */ + if (!hw->phy.reset_if_overtemp && + (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw))) + goto out; + + /* + * Perform soft PHY reset to the PHY_XS. + * This will cause a soft reset to the PHY + */ + hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, + IXGBE_MDIO_PHY_XS_RESET); + + /* + * Poll for reset bit to self-clear indicating reset is complete. + * Some PHYs could take up to 3 seconds to complete and need about + * 1.7 usec delay after the reset is complete. + */ + for (i = 0; i < 30; i++) { + msleep(100); + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, &ctrl); + if (!(ctrl & IXGBE_MDIO_PHY_XS_RESET)) { + udelay(2); + break; + } + } + + if (ctrl & IXGBE_MDIO_PHY_XS_RESET) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "PHY reset polling failed to complete.\n"); + } + +out: + return status; +} + +/** + * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @phy_data: Pointer to read data from PHY register + **/ +s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data) +{ + u32 command; + u32 i; + u32 data; + s32 status = 0; + u16 gssr; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == 0) { + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address command did not complete.\n"); + status = IXGBE_ERR_PHY; + } + + if (status == 0) { + /* + * Address cycle complete, setup and write the read + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY read command didn't complete\n"); + status = IXGBE_ERR_PHY; + } else { + /* + * Read operation is complete. Get the data + * from MSRWD + */ + data = IXGBE_READ_REG(hw, IXGBE_MSRWD); + data >>= IXGBE_MSRWD_READ_DATA_SHIFT; + *phy_data = (u16)(data); + } + } + + hw->mac.ops.release_swfw_sync(hw, gssr); + } + + return status; +} + +/** + * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register + **/ +s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + u32 command; + u32 i; + s32 status = 0; + u16 gssr; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == 0) { + /* Put the data in the MDI single read and write data register*/ + IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); + + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address cmd didn't complete\n"); + status = IXGBE_ERR_PHY; + } + + if (status == 0) { + /* + * Address cycle complete, setup and write the write + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address cmd didn't complete\n"); + status = IXGBE_ERR_PHY; + } + } + + hw->mac.ops.release_swfw_sync(hw, gssr); + } + + return status; +} + +/** + * ixgbe_setup_phy_link_generic - Set and restart autoneg + * @hw: pointer to hardware structure + * + * Restart autonegotiation and PHY and waits for completion. + **/ +s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; + bool autoneg = false; + ixgbe_link_speed speed; + + ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg); + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + /* Set or unset auto-negotiation 10G advertisement */ + hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE; + + hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + /* Set or unset auto-negotiation 1G advertisement */ + hw->phy.ops.read_reg(hw, + IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE; + + hw->phy.ops.write_reg(hw, + IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_100_FULL) { + /* Set or unset auto-negotiation 100M advertisement */ + hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= ~(IXGBE_MII_100BASE_T_ADVERTISE | + IXGBE_MII_100BASE_T_ADVERTISE_HALF); + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) + autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE; + + hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + } + + /* Restart PHY autonegotiation and wait for completion */ + hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg); + + autoneg_reg |= IXGBE_MII_RESTART; + + hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg); + + /* Wait for autonegotiation to finish */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + /* Restart PHY autonegotiation and wait for completion */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE; + if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) + break; + } + + if (time_out == max_time_out) { + status = IXGBE_ERR_LINK_SETUP; + hw_dbg(hw, "ixgbe_setup_phy_link_generic: time out"); + } + + return status; +} + +/** + * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + **/ +s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + + /* + * Clear autoneg_advertised and set new values based on input link + * speed. + */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + if (speed & IXGBE_LINK_SPEED_100_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; + + /* Setup link based on the new speed settings */ + hw->phy.ops.setup_link(hw); + + return 0; +} + +/** + * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value + * + * Determines the link capabilities by reading the AUTOC register. + **/ +s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + s32 status = IXGBE_ERR_LINK_SETUP; + u16 speed_ability; + + *speed = 0; + *autoneg = true; + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &speed_ability); + + if (status == 0) { + if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M) + *speed |= IXGBE_LINK_SPEED_100_FULL; + } + + return status; +} + +/** + * ixgbe_check_phy_link_tnx - Determine link and speed status + * @hw: pointer to hardware structure + * + * Reads the VS1 register to determine if link is up and the current speed for + * the PHY. + **/ +s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 phy_link = 0; + u16 phy_speed = 0; + u16 phy_data = 0; + + /* Initialize speed and link to default case */ + *link_up = false; + *speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* + * Check current speed and link status of the PHY register. + * This is a vendor specific register and may have to + * be changed for other copper PHYs. + */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + &phy_data); + phy_link = phy_data & IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; + phy_speed = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS; + if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) { + *link_up = true; + if (phy_speed == + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + } + } + + return status; +} + +/** + * ixgbe_setup_phy_link_tnx - Set and restart autoneg + * @hw: pointer to hardware structure + * + * Restart autonegotiation and PHY and waits for completion. + **/ +s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; + bool autoneg = false; + ixgbe_link_speed speed; + + ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg); + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + /* Set or unset auto-negotiation 10G advertisement */ + hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE; + + hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + /* Set or unset auto-negotiation 1G advertisement */ + hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX; + + hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_100_FULL) { + /* Set or unset auto-negotiation 100M advertisement */ + hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_100BASE_T_ADVERTISE; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) + autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE; + + hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + } + + /* Restart PHY autonegotiation and wait for completion */ + hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg); + + autoneg_reg |= IXGBE_MII_RESTART; + + hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg); + + /* Wait for autonegotiation to finish */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + /* Restart PHY autonegotiation and wait for completion */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE; + if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) + break; + } + + if (time_out == max_time_out) { + status = IXGBE_ERR_LINK_SETUP; + hw_dbg(hw, "ixgbe_setup_phy_link_tnx: time out"); + } + + return status; +} + +/** + * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version + **/ +s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, + u16 *firmware_version) +{ + s32 status = 0; + + status = hw->phy.ops.read_reg(hw, TNX_FW_REV, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + firmware_version); + + return status; +} + +/** + * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version + **/ +s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, + u16 *firmware_version) +{ + s32 status = 0; + + status = hw->phy.ops.read_reg(hw, AQ_FW_REV, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + firmware_version); + + return status; +} + +/** + * ixgbe_reset_phy_nl - Performs a PHY reset + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) +{ + u16 phy_offset, control, eword, edata, block_crc; + bool end_data = false; + u16 list_offset, data_offset; + u16 phy_data = 0; + s32 ret_val = 0; + u32 i; + + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); + + /* reset the PHY and poll for completion */ + hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, + (phy_data | IXGBE_MDIO_PHY_XS_RESET)); + + for (i = 0; i < 100; i++) { + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); + if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0) + break; + msleep(10); + } + + if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) { + hw_dbg(hw, "PHY reset did not complete.\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + + /* Get init offsets */ + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + if (ret_val != 0) + goto out; + + ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc); + data_offset++; + while (!end_data) { + /* + * Read control word from PHY init contents offset + */ + ret_val = hw->eeprom.ops.read(hw, data_offset, &eword); + control = (eword & IXGBE_CONTROL_MASK_NL) >> + IXGBE_CONTROL_SHIFT_NL; + edata = eword & IXGBE_DATA_MASK_NL; + switch (control) { + case IXGBE_DELAY_NL: + data_offset++; + hw_dbg(hw, "DELAY: %d MS\n", edata); + msleep(edata); + break; + case IXGBE_DATA_NL: + hw_dbg(hw, "DATA:\n"); + data_offset++; + hw->eeprom.ops.read(hw, data_offset++, + &phy_offset); + for (i = 0; i < edata; i++) { + hw->eeprom.ops.read(hw, data_offset, &eword); + hw->phy.ops.write_reg(hw, phy_offset, + IXGBE_TWINAX_DEV, eword); + hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword, + phy_offset); + data_offset++; + phy_offset++; + } + break; + case IXGBE_CONTROL_NL: + data_offset++; + hw_dbg(hw, "CONTROL:\n"); + if (edata == IXGBE_CONTROL_EOL_NL) { + hw_dbg(hw, "EOL\n"); + end_data = true; + } else if (edata == IXGBE_CONTROL_SOL_NL) { + hw_dbg(hw, "SOL\n"); + } else { + hw_dbg(hw, "Bad control value\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + break; + default: + hw_dbg(hw, "Bad control type\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + } + +out: + return ret_val; +} + +/** + * ixgbe_identify_module_generic - Identifies module type + * @hw: pointer to hardware structure + * + * Determines HW type and calls appropriate function. + **/ +s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_SFP_NOT_PRESENT; + + switch (hw->mac.ops.get_media_type(hw)) { + case ixgbe_media_type_fiber: + status = ixgbe_identify_sfp_module_generic(hw); + break; + + case ixgbe_media_type_fiber_qsfp: + status = ixgbe_identify_qsfp_module_generic(hw); + break; + + default: + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + status = IXGBE_ERR_SFP_NOT_PRESENT; + break; + } + + return status; +} + +/** + * ixgbe_identify_sfp_module_generic - Identifies SFP modules + * @hw: pointer to hardware structure + * + * Searches for and identifies the SFP module and assigns appropriate PHY type. + **/ +s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u32 vendor_oui = 0; + enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type; + u8 identifier = 0; + u8 comp_codes_1g = 0; + u8 comp_codes_10g = 0; + u8 oui_bytes[3] = {0, 0, 0}; + u8 cable_tech = 0; + u8 cable_spec = 0; + u16 enforce_sfp = 0; + + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) { + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + status = IXGBE_ERR_SFP_NOT_PRESENT; + goto out; + } + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_IDENTIFIER, + &identifier); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + /* LAN ID is needed for sfp_type determination */ + hw->mac.ops.set_lan_id(hw); + + if (identifier != IXGBE_SFF_IDENTIFIER_SFP) { + hw->phy.type = ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + } else { + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_1GBE_COMP_CODES, + &comp_codes_1g); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, + &comp_codes_10g); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_CABLE_TECHNOLOGY, + &cable_tech); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + /* ID Module + * ========= + * 0 SFP_DA_CU + * 1 SFP_SR + * 2 SFP_LR + * 3 SFP_DA_CORE0 - 82599-specific + * 4 SFP_DA_CORE1 - 82599-specific + * 5 SFP_SR/LR_CORE0 - 82599-specific + * 6 SFP_SR/LR_CORE1 - 82599-specific + * 7 SFP_act_lmt_DA_CORE0 - 82599-specific + * 8 SFP_act_lmt_DA_CORE1 - 82599-specific + * 9 SFP_1g_cu_CORE0 - 82599-specific + * 10 SFP_1g_cu_CORE1 - 82599-specific + * 11 SFP_1g_sx_CORE0 - 82599-specific + * 12 SFP_1g_sx_CORE1 - 82599-specific + */ + if (hw->mac.type == ixgbe_mac_82598EB) { + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) + hw->phy.sfp_type = ixgbe_sfp_type_da_cu; + else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_sr; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_lr; + else + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + } else if (hw->mac.type == ixgbe_mac_82599EB) { + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_da_cu_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_da_cu_core1; + } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) { + hw->phy.ops.read_i2c_eeprom( + hw, IXGBE_SFF_CABLE_SPEC_COMP, + &cable_spec); + if (cable_spec & + IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_da_act_lmt_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_da_act_lmt_core1; + } else { + hw->phy.sfp_type = + ixgbe_sfp_type_unknown; + } + } else if (comp_codes_10g & + (IXGBE_SFF_10GBASESR_CAPABLE | + IXGBE_SFF_10GBASELR_CAPABLE)) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_srlr_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_srlr_core1; + } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_1g_cu_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_1g_cu_core1; + } else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_1g_sx_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_1g_sx_core1; + } else { + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + } + } + + if (hw->phy.sfp_type != stored_sfp_type) + hw->phy.sfp_setup_needed = true; + + /* Determine if the SFP+ PHY is dual speed or not. */ + hw->phy.multispeed_fiber = false; + if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || + ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE))) + hw->phy.multispeed_fiber = true; + + /* Determine PHY vendor */ + if (hw->phy.type != ixgbe_phy_nl) { + hw->phy.id = identifier; + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE0, + &oui_bytes[0]); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE1, + &oui_bytes[1]); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE2, + &oui_bytes[2]); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + vendor_oui = + ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | + (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | + (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); + + switch (vendor_oui) { + case IXGBE_SFF_VENDOR_OUI_TYCO: + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) + hw->phy.type = + ixgbe_phy_sfp_passive_tyco; + break; + case IXGBE_SFF_VENDOR_OUI_FTL: + if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) + hw->phy.type = ixgbe_phy_sfp_ftl_active; + else + hw->phy.type = ixgbe_phy_sfp_ftl; + break; + case IXGBE_SFF_VENDOR_OUI_AVAGO: + hw->phy.type = ixgbe_phy_sfp_avago; + break; + case IXGBE_SFF_VENDOR_OUI_INTEL: + hw->phy.type = ixgbe_phy_sfp_intel; + break; + default: + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) + hw->phy.type = + ixgbe_phy_sfp_passive_unknown; + else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) + hw->phy.type = + ixgbe_phy_sfp_active_unknown; + else + hw->phy.type = ixgbe_phy_sfp_unknown; + break; + } + } + + /* Allow any DA cable vendor */ + if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE | + IXGBE_SFF_DA_ACTIVE_CABLE)) { + status = 0; + goto out; + } + + /* Verify supported 1G SFP modules */ + if (comp_codes_10g == 0 && + !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { + hw->phy.type = ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + + /* Anything else 82598-based is supported */ + if (hw->mac.type == ixgbe_mac_82598EB) { + status = 0; + goto out; + } + + ixgbe_get_device_caps(hw, &enforce_sfp); + if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) && + !((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) || + (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) || + (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0) || + (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1))) { + /* Make sure we're a supported PHY type */ + if (hw->phy.type == ixgbe_phy_sfp_intel) { + status = 0; + } else { + if (hw->allow_unsupported_sfp == true) { + EWARN(hw, "WARNING: Intel (R) Network " + "Connections are quality tested " + "using Intel (R) Ethernet Optics." + " Using untested modules is not " + "supported and may cause unstable" + " operation or damage to the " + "module or the adapter. Intel " + "Corporation is not responsible " + "for any harm caused by using " + "untested modules.\n", status); + status = 0; + } else { + hw_dbg(hw, "SFP+ module not supported\n"); + hw->phy.type = + ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + } + } + } else { + status = 0; + } + } + +out: + return status; + +err_read_i2c_eeprom: + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + if (hw->phy.type != ixgbe_phy_nl) { + hw->phy.id = 0; + hw->phy.type = ixgbe_phy_unknown; + } + return IXGBE_ERR_SFP_NOT_PRESENT; +} + +/** + * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules + * @hw: pointer to hardware structure + * + * Searches for and identifies the QSFP module and assigns appropriate PHY type + **/ +s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) +{ + s32 status = 0; + + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) { + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + status = IXGBE_ERR_SFP_NOT_PRESENT; + } + + return status; +} + + +/** + * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence + * @hw: pointer to hardware structure + * @list_offset: offset to the SFP ID list + * @data_offset: offset to the SFP data block + * + * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if + * so it returns the offsets to the phy init sequence block. + **/ +s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, + u16 *list_offset, + u16 *data_offset) +{ + u16 sfp_id; + u16 sfp_type = hw->phy.sfp_type; + + if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) + return IXGBE_ERR_SFP_NOT_SUPPORTED; + + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + return IXGBE_ERR_SFP_NOT_PRESENT; + + if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) && + (hw->phy.sfp_type == ixgbe_sfp_type_da_cu)) + return IXGBE_ERR_SFP_NOT_SUPPORTED; + + /* + * Limiting active cables and 1G Phys must be initialized as + * SR modules + */ + if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 || + sfp_type == ixgbe_sfp_type_1g_cu_core0 || + sfp_type == ixgbe_sfp_type_1g_sx_core0) + sfp_type = ixgbe_sfp_type_srlr_core0; + else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 || + sfp_type == ixgbe_sfp_type_1g_cu_core1 || + sfp_type == ixgbe_sfp_type_1g_sx_core1) + sfp_type = ixgbe_sfp_type_srlr_core1; + + /* Read offset to PHY init contents */ + hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset); + + if ((!*list_offset) || (*list_offset == 0xFFFF)) + return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; + + /* Shift offset to first ID word */ + (*list_offset)++; + + /* + * Find the matching SFP ID in the EEPROM + * and program the init sequence + */ + hw->eeprom.ops.read(hw, *list_offset, &sfp_id); + + while (sfp_id != IXGBE_PHY_INIT_END_NL) { + if (sfp_id == sfp_type) { + (*list_offset)++; + hw->eeprom.ops.read(hw, *list_offset, data_offset); + if ((!*data_offset) || (*data_offset == 0xFFFF)) { + hw_dbg(hw, "SFP+ module not supported\n"); + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } else { + break; + } + } else { + (*list_offset) += 2; + if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) + return IXGBE_ERR_PHY; + } + } + + if (sfp_id == IXGBE_PHY_INIT_END_NL) { + hw_dbg(hw, "No matching SFP+ module found\n"); + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + + return 0; +} + +/** + * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data) +{ + return hw->phy.ops.read_i2c_byte(hw, byte_offset, + IXGBE_I2C_EEPROM_DEV_ADDR, + eeprom_data); +} + +/** + * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to write + * @eeprom_data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 eeprom_data) +{ + return hw->phy.ops.write_i2c_byte(hw, byte_offset, + IXGBE_I2C_EEPROM_DEV_ADDR, + eeprom_data); +} + +/** + * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + s32 status = 0; + u32 max_retry = 10; + u32 retry = 0; + u16 swfw_mask = 0; + bool nack = 1; + *data = 0; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + swfw_mask = IXGBE_GSSR_PHY1_SM; + else + swfw_mask = IXGBE_GSSR_PHY0_SM; + + do { + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) + != 0) { + status = IXGBE_ERR_SWFW_SYNC; + goto read_byte_out; + } + + ixgbe_i2c_start(hw); + + /* Device Address and write indication */ + status = ixgbe_clock_out_i2c_byte(hw, dev_addr); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_byte(hw, byte_offset); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + ixgbe_i2c_start(hw); + + /* Device Address and read indication */ + status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1)); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_in_i2c_byte(hw, data); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_bit(hw, nack); + if (status != 0) + goto fail; + + ixgbe_i2c_stop(hw); + break; + +fail: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(100); + ixgbe_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + hw_dbg(hw, "I2C byte read error - Retrying.\n"); + else + hw_dbg(hw, "I2C byte read error.\n"); + + } while (retry < max_retry); + + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + +read_byte_out: + return status; +} + +/** + * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + s32 status = 0; + u32 max_retry = 1; + u32 retry = 0; + u16 swfw_mask = 0; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + swfw_mask = IXGBE_GSSR_PHY1_SM; + else + swfw_mask = IXGBE_GSSR_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) { + status = IXGBE_ERR_SWFW_SYNC; + goto write_byte_out; + } + + do { + ixgbe_i2c_start(hw); + + status = ixgbe_clock_out_i2c_byte(hw, dev_addr); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_byte(hw, byte_offset); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_byte(hw, data); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + ixgbe_i2c_stop(hw); + break; + +fail: + ixgbe_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + hw_dbg(hw, "I2C byte write error - Retrying.\n"); + else + hw_dbg(hw, "I2C byte write error.\n"); + } while (retry < max_retry); + + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + +write_byte_out: + return status; +} + +/** + * ixgbe_i2c_start - Sets I2C start condition + * @hw: pointer to hardware structure + * + * Sets I2C start condition (High -> Low on SDA while SCL is High) + **/ +static void ixgbe_i2c_start(struct ixgbe_hw *hw) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + /* Start condition must begin with data and clock high */ + ixgbe_set_i2c_data(hw, &i2cctl, 1); + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for start condition (4.7us) */ + udelay(IXGBE_I2C_T_SU_STA); + + ixgbe_set_i2c_data(hw, &i2cctl, 0); + + /* Hold time for start condition (4us) */ + udelay(IXGBE_I2C_T_HD_STA); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + udelay(IXGBE_I2C_T_LOW); + +} + +/** + * ixgbe_i2c_stop - Sets I2C stop condition + * @hw: pointer to hardware structure + * + * Sets I2C stop condition (Low -> High on SDA while SCL is High) + **/ +static void ixgbe_i2c_stop(struct ixgbe_hw *hw) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + /* Stop condition must begin with data low and clock high */ + ixgbe_set_i2c_data(hw, &i2cctl, 0); + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for stop condition (4us) */ + udelay(IXGBE_I2C_T_SU_STO); + + ixgbe_set_i2c_data(hw, &i2cctl, 1); + + /* bus free time between stop and start (4.7us)*/ + udelay(IXGBE_I2C_T_BUF); +} + +/** + * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte to clock in + * + * Clocks in one byte data via I2C data/clock + **/ +static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data) +{ + s32 i; + bool bit = 0; + + for (i = 7; i >= 0; i--) { + ixgbe_clock_in_i2c_bit(hw, &bit); + *data |= bit << i; + } + + return 0; +} + +/** + * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte clocked out + * + * Clocks out one byte data via I2C data/clock + **/ +static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) +{ + s32 status = 0; + s32 i; + u32 i2cctl; + bool bit = 0; + + for (i = 7; i >= 0; i--) { + bit = (data >> i) & 0x1; + status = ixgbe_clock_out_i2c_bit(hw, bit); + + if (status != 0) + break; + } + + /* Release SDA line (set high) */ + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + i2cctl |= IXGBE_I2C_DATA_OUT; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, i2cctl); + IXGBE_WRITE_FLUSH(hw); + + return status; +} + +/** + * ixgbe_get_i2c_ack - Polls for I2C ACK + * @hw: pointer to hardware structure + * + * Clocks in/out one bit via I2C data/clock + **/ +static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 i = 0; + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 timeout = 10; + bool ack = 1; + + ixgbe_raise_i2c_clk(hw, &i2cctl); + + + /* Minimum high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + /* Poll for ACK. Note that ACK in I2C spec is + * transition from 1 to 0 */ + for (i = 0; i < timeout; i++) { + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + ack = ixgbe_get_i2c_data(&i2cctl); + + udelay(1); + if (ack == 0) + break; + } + + if (ack == 1) { + hw_dbg(hw, "I2C ack was not received.\n"); + status = IXGBE_ERR_I2C; + } + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + udelay(IXGBE_I2C_T_LOW); + + return status; +} + +/** + * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: read data value + * + * Clocks in one bit via I2C data/clock + **/ +static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + *data = ixgbe_get_i2c_data(&i2cctl); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + udelay(IXGBE_I2C_T_LOW); + + return 0; +} + +/** + * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: data value to write + * + * Clocks out one bit via I2C data/clock + **/ +static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) +{ + s32 status; + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + status = ixgbe_set_i2c_data(hw, &i2cctl, data); + if (status == 0) { + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us. + * This also takes care of the data hold time. + */ + udelay(IXGBE_I2C_T_LOW); + } else { + status = IXGBE_ERR_I2C; + hw_dbg(hw, "I2C data was not set to %X\n", data); + } + + return status; +} +/** + * ixgbe_raise_i2c_clk - Raises the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Raises the I2C clock line '0'->'1' + **/ +static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) +{ + u32 i = 0; + u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT; + u32 i2cctl_r = 0; + + for (i = 0; i < timeout; i++) { + *i2cctl |= IXGBE_I2C_CLK_OUT; + + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_FLUSH(hw); + /* SCL rise time (1000ns) */ + udelay(IXGBE_I2C_T_RISE); + + i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + if (i2cctl_r & IXGBE_I2C_CLK_IN) + break; + } +} + +/** + * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Lowers the I2C clock line '1'->'0' + **/ +static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) +{ + + *i2cctl &= ~IXGBE_I2C_CLK_OUT; + + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_FLUSH(hw); + + /* SCL fall time (300ns) */ + udelay(IXGBE_I2C_T_FALL); +} + +/** + * ixgbe_set_i2c_data - Sets the I2C data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * @data: I2C data value (0 or 1) to set + * + * Sets the I2C data bit + **/ +static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) +{ + s32 status = 0; + + if (data) + *i2cctl |= IXGBE_I2C_DATA_OUT; + else + *i2cctl &= ~IXGBE_I2C_DATA_OUT; + + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_FLUSH(hw); + + /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ + udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA); + + /* Verify data was set correctly */ + *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + if (data != ixgbe_get_i2c_data(i2cctl)) { + status = IXGBE_ERR_I2C; + hw_dbg(hw, "Error - I2C data was not set to %X.\n", data); + } + + return status; +} + +/** + * ixgbe_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Returns the I2C data bit value + **/ +static bool ixgbe_get_i2c_data(u32 *i2cctl) +{ + bool data; + + if (*i2cctl & IXGBE_I2C_DATA_IN) + data = 1; + else + data = 0; + + return data; +} + +/** + * ixgbe_i2c_bus_clear - Clears the I2C bus + * @hw: pointer to hardware structure + * + * Clears the I2C bus by sending nine clock pulses. + * Used when data line is stuck low. + **/ +void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 i; + + ixgbe_i2c_start(hw); + + ixgbe_set_i2c_data(hw, &i2cctl, 1); + + for (i = 0; i < 9; i++) { + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Min high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Min low period of clock is 4.7us*/ + udelay(IXGBE_I2C_T_LOW); + } + + ixgbe_i2c_start(hw); + + /* Put the i2c bus back to default state */ + ixgbe_i2c_stop(hw); +} + +/** + * ixgbe_tn_check_overtemp - Checks if an overtemp occurred. + * @hw: pointer to hardware structure + * + * Checks if the LASI temp alarm status was triggered due to overtemp + **/ +s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) +{ + s32 status = 0; + u16 phy_data = 0; + + if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM) + goto out; + + /* Check that the LASI temp alarm status was triggered */ + hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_data); + + if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM)) + goto out; + + status = IXGBE_ERR_OVERTEMP; +out: + return status; +} |