diff options
Diffstat (limited to 'kernel/linux')
65 files changed, 66647 insertions, 0 deletions
diff --git a/kernel/linux/Makefile b/kernel/linux/Makefile new file mode 100644 index 00000000..c2c45a3e --- /dev/null +++ b/kernel/linux/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2017 NXP + +include $(RTE_SDK)/mk/rte.vars.mk + +DIRS-$(CONFIG_RTE_EAL_IGB_UIO) += igb_uio +DIRS-$(CONFIG_RTE_KNI_KMOD) += kni + +include $(RTE_SDK)/mk/rte.subdir.mk diff --git a/kernel/linux/igb_uio/Kbuild b/kernel/linux/igb_uio/Kbuild new file mode 100644 index 00000000..3ab85c41 --- /dev/null +++ b/kernel/linux/igb_uio/Kbuild @@ -0,0 +1,2 @@ +ccflags-y := $(MODULE_CFLAGS) +obj-m := igb_uio.o diff --git a/kernel/linux/igb_uio/Makefile b/kernel/linux/igb_uio/Makefile new file mode 100644 index 00000000..f83bcc7c --- /dev/null +++ b/kernel/linux/igb_uio/Makefile @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2010-2014 Intel Corporation + +include $(RTE_SDK)/mk/rte.vars.mk + +# +# module name and path +# +MODULE = igb_uio +MODULE_PATH = drivers/net/igb_uio + +# +# CFLAGS +# +MODULE_CFLAGS += -I$(SRCDIR) --param max-inline-insns-single=100 +MODULE_CFLAGS += -I$(RTE_OUTPUT)/include +MODULE_CFLAGS += -Winline -Wall -Werror +MODULE_CFLAGS += -include $(RTE_OUTPUT)/include/rte_config.h + +# +# all source are stored in SRCS-y +# +SRCS-y := igb_uio.c + +include $(RTE_SDK)/mk/rte.module.mk diff --git a/kernel/linux/igb_uio/compat.h b/kernel/linux/igb_uio/compat.h new file mode 100644 index 00000000..8dbb896a --- /dev/null +++ b/kernel/linux/igb_uio/compat.h @@ -0,0 +1,154 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Minimal wrappers to allow compiling igb_uio on older kernels. + */ + +#ifndef RHEL_RELEASE_VERSION +#define RHEL_RELEASE_VERSION(a, b) (((a) << 8) + (b)) +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0) +#define pci_cfg_access_lock pci_block_user_cfg_access +#define pci_cfg_access_unlock pci_unblock_user_cfg_access +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 18, 0) +#define HAVE_PTE_MASK_PAGE_IOMAP +#endif + +#ifndef PCI_MSIX_ENTRY_SIZE +#define PCI_MSIX_ENTRY_SIZE 16 +#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 +#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1 +#endif + +/* + * for kernels < 2.6.38 and backported patch that moves MSI-X entry definition + * to pci_regs.h Those kernels has PCI_MSIX_ENTRY_SIZE defined but not + * PCI_MSIX_ENTRY_CTRL_MASKBIT + */ +#ifndef PCI_MSIX_ENTRY_CTRL_MASKBIT +#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1 +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34) && \ + (!(defined(RHEL_RELEASE_CODE) && \ + RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5, 9))) + +static int pci_num_vf(struct pci_dev *dev) +{ + struct iov { + int pos; + int nres; + u32 cap; + u16 ctrl; + u16 total; + u16 initial; + u16 nr_virtfn; + } *iov = (struct iov *)dev->sriov; + + if (!dev->is_physfn) + return 0; + + return iov->nr_virtfn; +} + +#endif /* < 2.6.34 */ + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 39) && \ + (!(defined(RHEL_RELEASE_CODE) && \ + RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 4))) + +#define kstrtoul strict_strtoul + +#endif /* < 2.6.39 */ + +#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0) && \ + (!(defined(RHEL_RELEASE_CODE) && \ + RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 3))) + +/* Check if INTX works to control irq's. + * Set's INTX_DISABLE flag and reads it back + */ +static bool pci_intx_mask_supported(struct pci_dev *pdev) +{ + bool mask_supported = false; + uint16_t orig, new; + + pci_block_user_cfg_access(pdev); + pci_read_config_word(pdev, PCI_COMMAND, &orig); + pci_write_config_word(pdev, PCI_COMMAND, + orig ^ PCI_COMMAND_INTX_DISABLE); + pci_read_config_word(pdev, PCI_COMMAND, &new); + + if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) { + dev_err(&pdev->dev, "Command register changed from " + "0x%x to 0x%x: driver or hardware bug?\n", orig, new); + } else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) { + mask_supported = true; + pci_write_config_word(pdev, PCI_COMMAND, orig); + } + pci_unblock_user_cfg_access(pdev); + + return mask_supported; +} + +static bool pci_check_and_mask_intx(struct pci_dev *pdev) +{ + bool pending; + uint32_t status; + + pci_block_user_cfg_access(pdev); + pci_read_config_dword(pdev, PCI_COMMAND, &status); + + /* interrupt is not ours, goes to out */ + pending = (((status >> 16) & PCI_STATUS_INTERRUPT) != 0); + if (pending) { + uint16_t old, new; + + old = status; + if (status != 0) + new = old & (~PCI_COMMAND_INTX_DISABLE); + else + new = old | PCI_COMMAND_INTX_DISABLE; + + if (old != new) + pci_write_config_word(pdev, PCI_COMMAND, new); + } + pci_unblock_user_cfg_access(pdev); + + return pending; +} + +#endif /* < 3.3.0 */ + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 16, 0) +#define HAVE_PCI_IS_BRIDGE_API 1 +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 3, 0) +#define HAVE_MSI_LIST_IN_GENERIC_DEVICE 1 +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 5, 0) +#define HAVE_PCI_MSI_MASK_IRQ 1 +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 8, 0) +#define HAVE_ALLOC_IRQ_VECTORS 1 +#endif + +static inline bool igbuio_kernel_is_locked_down(void) +{ +#ifdef CONFIG_LOCK_DOWN_KERNEL +#ifdef CONFIG_LOCK_DOWN_IN_EFI_SECURE_BOOT + return kernel_is_locked_down(NULL); +#elif defined(CONFIG_EFI_SECURE_BOOT_LOCK_DOWN) + return kernel_is_locked_down(); +#else + return false; +#endif +#else + return false; +#endif +} diff --git a/kernel/linux/igb_uio/igb_uio.c b/kernel/linux/igb_uio/igb_uio.c new file mode 100644 index 00000000..3398eacd --- /dev/null +++ b/kernel/linux/igb_uio/igb_uio.c @@ -0,0 +1,669 @@ +// SPDX-License-Identifier: GPL-2.0 +/*- + * Copyright(c) 2010-2017 Intel Corporation. All rights reserved. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/uio_driver.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/msi.h> +#include <linux/version.h> +#include <linux/slab.h> + +#include <rte_pci_dev_features.h> + +#include "compat.h" + +/** + * A structure describing the private information for a uio device. + */ +struct rte_uio_pci_dev { + struct uio_info info; + struct pci_dev *pdev; + enum rte_intr_mode mode; + struct mutex lock; + int refcnt; +}; + +static int wc_activate; +static char *intr_mode; +static enum rte_intr_mode igbuio_intr_mode_preferred = RTE_INTR_MODE_MSIX; +/* sriov sysfs */ +static ssize_t +show_max_vfs(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, 10, "%u\n", dev_num_vf(dev)); +} + +static ssize_t +store_max_vfs(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int err = 0; + unsigned long max_vfs; + struct pci_dev *pdev = to_pci_dev(dev); + + if (0 != kstrtoul(buf, 0, &max_vfs)) + return -EINVAL; + + if (0 == max_vfs) + pci_disable_sriov(pdev); + else if (0 == pci_num_vf(pdev)) + err = pci_enable_sriov(pdev, max_vfs); + else /* do nothing if change max_vfs number */ + err = -EINVAL; + + return err ? err : count; +} + +static DEVICE_ATTR(max_vfs, S_IRUGO | S_IWUSR, show_max_vfs, store_max_vfs); + +static struct attribute *dev_attrs[] = { + &dev_attr_max_vfs.attr, + NULL, +}; + +static const struct attribute_group dev_attr_grp = { + .attrs = dev_attrs, +}; + +#ifndef HAVE_PCI_MSI_MASK_IRQ +/* + * It masks the msix on/off of generating MSI-X messages. + */ +static void +igbuio_msix_mask_irq(struct msi_desc *desc, s32 state) +{ + u32 mask_bits = desc->masked; + unsigned int offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + + PCI_MSIX_ENTRY_VECTOR_CTRL; + + if (state != 0) + mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT; + else + mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT; + + if (mask_bits != desc->masked) { + writel(mask_bits, desc->mask_base + offset); + readl(desc->mask_base); + desc->masked = mask_bits; + } +} + +/* + * It masks the msi on/off of generating MSI messages. + */ +static void +igbuio_msi_mask_irq(struct pci_dev *pdev, struct msi_desc *desc, int32_t state) +{ + u32 mask_bits = desc->masked; + u32 offset = desc->irq - pdev->irq; + u32 mask = 1 << offset; + + if (!desc->msi_attrib.maskbit) + return; + + if (state != 0) + mask_bits &= ~mask; + else + mask_bits |= mask; + + if (mask_bits != desc->masked) { + pci_write_config_dword(pdev, desc->mask_pos, mask_bits); + desc->masked = mask_bits; + } +} + +static void +igbuio_mask_irq(struct pci_dev *pdev, enum rte_intr_mode mode, s32 irq_state) +{ + struct msi_desc *desc; + struct list_head *msi_list; + +#ifdef HAVE_MSI_LIST_IN_GENERIC_DEVICE + msi_list = &pdev->dev.msi_list; +#else + msi_list = &pdev->msi_list; +#endif + + if (mode == RTE_INTR_MODE_MSIX) { + list_for_each_entry(desc, msi_list, list) + igbuio_msix_mask_irq(desc, irq_state); + } else if (mode == RTE_INTR_MODE_MSI) { + list_for_each_entry(desc, msi_list, list) + igbuio_msi_mask_irq(pdev, desc, irq_state); + } +} +#endif + +/** + * This is the irqcontrol callback to be registered to uio_info. + * It can be used to disable/enable interrupt from user space processes. + * + * @param info + * pointer to uio_info. + * @param irq_state + * state value. 1 to enable interrupt, 0 to disable interrupt. + * + * @return + * - On success, 0. + * - On failure, a negative value. + */ +static int +igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state) +{ + struct rte_uio_pci_dev *udev = info->priv; + struct pci_dev *pdev = udev->pdev; + +#ifdef HAVE_PCI_MSI_MASK_IRQ + struct irq_data *irq = irq_get_irq_data(udev->info.irq); +#endif + + pci_cfg_access_lock(pdev); + + if (udev->mode == RTE_INTR_MODE_MSIX || udev->mode == RTE_INTR_MODE_MSI) { +#ifdef HAVE_PCI_MSI_MASK_IRQ + if (irq_state == 1) + pci_msi_unmask_irq(irq); + else + pci_msi_mask_irq(irq); +#else + igbuio_mask_irq(pdev, udev->mode, irq_state); +#endif + } + + if (udev->mode == RTE_INTR_MODE_LEGACY) + pci_intx(pdev, !!irq_state); + + pci_cfg_access_unlock(pdev); + + return 0; +} + +/** + * This is interrupt handler which will check if the interrupt is for the right device. + * If yes, disable it here and will be enable later. + */ +static irqreturn_t +igbuio_pci_irqhandler(int irq, void *dev_id) +{ + struct rte_uio_pci_dev *udev = (struct rte_uio_pci_dev *)dev_id; + struct uio_info *info = &udev->info; + + /* Legacy mode need to mask in hardware */ + if (udev->mode == RTE_INTR_MODE_LEGACY && + !pci_check_and_mask_intx(udev->pdev)) + return IRQ_NONE; + + uio_event_notify(info); + + /* Message signal mode, no share IRQ and automasked */ + return IRQ_HANDLED; +} + +static int +igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev) +{ + int err = 0; +#ifndef HAVE_ALLOC_IRQ_VECTORS + struct msix_entry msix_entry; +#endif + + switch (igbuio_intr_mode_preferred) { + case RTE_INTR_MODE_MSIX: + /* Only 1 msi-x vector needed */ +#ifndef HAVE_ALLOC_IRQ_VECTORS + msix_entry.entry = 0; + if (pci_enable_msix(udev->pdev, &msix_entry, 1) == 0) { + dev_dbg(&udev->pdev->dev, "using MSI-X"); + udev->info.irq_flags = IRQF_NO_THREAD; + udev->info.irq = msix_entry.vector; + udev->mode = RTE_INTR_MODE_MSIX; + break; + } +#else + if (pci_alloc_irq_vectors(udev->pdev, 1, 1, PCI_IRQ_MSIX) == 1) { + dev_dbg(&udev->pdev->dev, "using MSI-X"); + udev->info.irq_flags = IRQF_NO_THREAD; + udev->info.irq = pci_irq_vector(udev->pdev, 0); + udev->mode = RTE_INTR_MODE_MSIX; + break; + } +#endif + + /* fall back to MSI */ + case RTE_INTR_MODE_MSI: +#ifndef HAVE_ALLOC_IRQ_VECTORS + if (pci_enable_msi(udev->pdev) == 0) { + dev_dbg(&udev->pdev->dev, "using MSI"); + udev->info.irq_flags = IRQF_NO_THREAD; + udev->info.irq = udev->pdev->irq; + udev->mode = RTE_INTR_MODE_MSI; + break; + } +#else + if (pci_alloc_irq_vectors(udev->pdev, 1, 1, PCI_IRQ_MSI) == 1) { + dev_dbg(&udev->pdev->dev, "using MSI"); + udev->info.irq_flags = IRQF_NO_THREAD; + udev->info.irq = pci_irq_vector(udev->pdev, 0); + udev->mode = RTE_INTR_MODE_MSI; + break; + } +#endif + /* fall back to INTX */ + case RTE_INTR_MODE_LEGACY: + if (pci_intx_mask_supported(udev->pdev)) { + dev_dbg(&udev->pdev->dev, "using INTX"); + udev->info.irq_flags = IRQF_SHARED | IRQF_NO_THREAD; + udev->info.irq = udev->pdev->irq; + udev->mode = RTE_INTR_MODE_LEGACY; + break; + } + dev_notice(&udev->pdev->dev, "PCI INTX mask not supported\n"); + /* fall back to no IRQ */ + case RTE_INTR_MODE_NONE: + udev->mode = RTE_INTR_MODE_NONE; + udev->info.irq = UIO_IRQ_NONE; + break; + + default: + dev_err(&udev->pdev->dev, "invalid IRQ mode %u", + igbuio_intr_mode_preferred); + udev->info.irq = UIO_IRQ_NONE; + err = -EINVAL; + } + + if (udev->info.irq != UIO_IRQ_NONE) + err = request_irq(udev->info.irq, igbuio_pci_irqhandler, + udev->info.irq_flags, udev->info.name, + udev); + dev_info(&udev->pdev->dev, "uio device registered with irq %ld\n", + udev->info.irq); + + return err; +} + +static void +igbuio_pci_disable_interrupts(struct rte_uio_pci_dev *udev) +{ + if (udev->info.irq) { + free_irq(udev->info.irq, udev); + udev->info.irq = 0; + } + +#ifndef HAVE_ALLOC_IRQ_VECTORS + if (udev->mode == RTE_INTR_MODE_MSIX) + pci_disable_msix(udev->pdev); + if (udev->mode == RTE_INTR_MODE_MSI) + pci_disable_msi(udev->pdev); +#else + if (udev->mode == RTE_INTR_MODE_MSIX || + udev->mode == RTE_INTR_MODE_MSI) + pci_free_irq_vectors(udev->pdev); +#endif +} + + +/** + * This gets called while opening uio device file. + */ +static int +igbuio_pci_open(struct uio_info *info, struct inode *inode) +{ + struct rte_uio_pci_dev *udev = info->priv; + struct pci_dev *dev = udev->pdev; + int err; + + mutex_lock(&udev->lock); + if (++udev->refcnt > 1) { + mutex_unlock(&udev->lock); + return 0; + } + + /* set bus master, which was cleared by the reset function */ + pci_set_master(dev); + + /* enable interrupts */ + err = igbuio_pci_enable_interrupts(udev); + mutex_unlock(&udev->lock); + if (err) { + dev_err(&dev->dev, "Enable interrupt fails\n"); + return err; + } + return 0; +} + +static int +igbuio_pci_release(struct uio_info *info, struct inode *inode) +{ + struct rte_uio_pci_dev *udev = info->priv; + struct pci_dev *dev = udev->pdev; + + mutex_lock(&udev->lock); + if (--udev->refcnt > 0) { + mutex_unlock(&udev->lock); + return 0; + } + + /* disable interrupts */ + igbuio_pci_disable_interrupts(udev); + + /* stop the device from further DMA */ + pci_clear_master(dev); + + mutex_unlock(&udev->lock); + return 0; +} + +/* Remap pci resources described by bar #pci_bar in uio resource n. */ +static int +igbuio_pci_setup_iomem(struct pci_dev *dev, struct uio_info *info, + int n, int pci_bar, const char *name) +{ + unsigned long addr, len; + void *internal_addr; + + if (n >= ARRAY_SIZE(info->mem)) + return -EINVAL; + + addr = pci_resource_start(dev, pci_bar); + len = pci_resource_len(dev, pci_bar); + if (addr == 0 || len == 0) + return -1; + if (wc_activate == 0) { + internal_addr = ioremap(addr, len); + if (internal_addr == NULL) + return -1; + } else { + internal_addr = NULL; + } + info->mem[n].name = name; + info->mem[n].addr = addr; + info->mem[n].internal_addr = internal_addr; + info->mem[n].size = len; + info->mem[n].memtype = UIO_MEM_PHYS; + return 0; +} + +/* Get pci port io resources described by bar #pci_bar in uio resource n. */ +static int +igbuio_pci_setup_ioport(struct pci_dev *dev, struct uio_info *info, + int n, int pci_bar, const char *name) +{ + unsigned long addr, len; + + if (n >= ARRAY_SIZE(info->port)) + return -EINVAL; + + addr = pci_resource_start(dev, pci_bar); + len = pci_resource_len(dev, pci_bar); + if (addr == 0 || len == 0) + return -EINVAL; + + info->port[n].name = name; + info->port[n].start = addr; + info->port[n].size = len; + info->port[n].porttype = UIO_PORT_X86; + + return 0; +} + +/* Unmap previously ioremap'd resources */ +static void +igbuio_pci_release_iomem(struct uio_info *info) +{ + int i; + + for (i = 0; i < MAX_UIO_MAPS; i++) { + if (info->mem[i].internal_addr) + iounmap(info->mem[i].internal_addr); + } +} + +static int +igbuio_setup_bars(struct pci_dev *dev, struct uio_info *info) +{ + int i, iom, iop, ret; + unsigned long flags; + static const char *bar_names[PCI_STD_RESOURCE_END + 1] = { + "BAR0", + "BAR1", + "BAR2", + "BAR3", + "BAR4", + "BAR5", + }; + + iom = 0; + iop = 0; + + for (i = 0; i < ARRAY_SIZE(bar_names); i++) { + if (pci_resource_len(dev, i) != 0 && + pci_resource_start(dev, i) != 0) { + flags = pci_resource_flags(dev, i); + if (flags & IORESOURCE_MEM) { + ret = igbuio_pci_setup_iomem(dev, info, iom, + i, bar_names[i]); + if (ret != 0) + return ret; + iom++; + } else if (flags & IORESOURCE_IO) { + ret = igbuio_pci_setup_ioport(dev, info, iop, + i, bar_names[i]); + if (ret != 0) + return ret; + iop++; + } + } + } + + return (iom != 0 || iop != 0) ? ret : -ENOENT; +} + +#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 8, 0) +static int __devinit +#else +static int +#endif +igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct rte_uio_pci_dev *udev; + dma_addr_t map_dma_addr; + void *map_addr; + int err; + +#ifdef HAVE_PCI_IS_BRIDGE_API + if (pci_is_bridge(dev)) { + dev_warn(&dev->dev, "Ignoring PCI bridge device\n"); + return -ENODEV; + } +#endif + + udev = kzalloc(sizeof(struct rte_uio_pci_dev), GFP_KERNEL); + if (!udev) + return -ENOMEM; + + mutex_init(&udev->lock); + /* + * enable device: ask low-level code to enable I/O and + * memory + */ + err = pci_enable_device(dev); + if (err != 0) { + dev_err(&dev->dev, "Cannot enable PCI device\n"); + goto fail_free; + } + + /* enable bus mastering on the device */ + pci_set_master(dev); + + /* remap IO memory */ + err = igbuio_setup_bars(dev, &udev->info); + if (err != 0) + goto fail_release_iomem; + + /* set 64-bit DMA mask */ + err = pci_set_dma_mask(dev, DMA_BIT_MASK(64)); + if (err != 0) { + dev_err(&dev->dev, "Cannot set DMA mask\n"); + goto fail_release_iomem; + } + + err = pci_set_consistent_dma_mask(dev, DMA_BIT_MASK(64)); + if (err != 0) { + dev_err(&dev->dev, "Cannot set consistent DMA mask\n"); + goto fail_release_iomem; + } + + /* fill uio infos */ + udev->info.name = "igb_uio"; + udev->info.version = "0.1"; + udev->info.irqcontrol = igbuio_pci_irqcontrol; + udev->info.open = igbuio_pci_open; + udev->info.release = igbuio_pci_release; + udev->info.priv = udev; + udev->pdev = dev; + + err = sysfs_create_group(&dev->dev.kobj, &dev_attr_grp); + if (err != 0) + goto fail_release_iomem; + + /* register uio driver */ + err = uio_register_device(&dev->dev, &udev->info); + if (err != 0) + goto fail_remove_group; + + pci_set_drvdata(dev, udev); + + /* + * Doing a harmless dma mapping for attaching the device to + * the iommu identity mapping if kernel boots with iommu=pt. + * Note this is not a problem if no IOMMU at all. + */ + map_addr = dma_alloc_coherent(&dev->dev, 1024, &map_dma_addr, + GFP_KERNEL); + if (map_addr) + memset(map_addr, 0, 1024); + + if (!map_addr) + dev_info(&dev->dev, "dma mapping failed\n"); + else { + dev_info(&dev->dev, "mapping 1K dma=%#llx host=%p\n", + (unsigned long long)map_dma_addr, map_addr); + + dma_free_coherent(&dev->dev, 1024, map_addr, map_dma_addr); + dev_info(&dev->dev, "unmapping 1K dma=%#llx host=%p\n", + (unsigned long long)map_dma_addr, map_addr); + } + + return 0; + +fail_remove_group: + sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp); +fail_release_iomem: + igbuio_pci_release_iomem(&udev->info); + pci_disable_device(dev); +fail_free: + kfree(udev); + + return err; +} + +static void +igbuio_pci_remove(struct pci_dev *dev) +{ + struct rte_uio_pci_dev *udev = pci_get_drvdata(dev); + + mutex_destroy(&udev->lock); + sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp); + uio_unregister_device(&udev->info); + igbuio_pci_release_iomem(&udev->info); + pci_disable_device(dev); + pci_set_drvdata(dev, NULL); + kfree(udev); +} + +static int +igbuio_config_intr_mode(char *intr_str) +{ + if (!intr_str) { + pr_info("Use MSIX interrupt by default\n"); + return 0; + } + + if (!strcmp(intr_str, RTE_INTR_MODE_MSIX_NAME)) { + igbuio_intr_mode_preferred = RTE_INTR_MODE_MSIX; + pr_info("Use MSIX interrupt\n"); + } else if (!strcmp(intr_str, RTE_INTR_MODE_MSI_NAME)) { + igbuio_intr_mode_preferred = RTE_INTR_MODE_MSI; + pr_info("Use MSI interrupt\n"); + } else if (!strcmp(intr_str, RTE_INTR_MODE_LEGACY_NAME)) { + igbuio_intr_mode_preferred = RTE_INTR_MODE_LEGACY; + pr_info("Use legacy interrupt\n"); + } else { + pr_info("Error: bad parameter - %s\n", intr_str); + return -EINVAL; + } + + return 0; +} + +static struct pci_driver igbuio_pci_driver = { + .name = "igb_uio", + .id_table = NULL, + .probe = igbuio_pci_probe, + .remove = igbuio_pci_remove, +}; + +static int __init +igbuio_pci_init_module(void) +{ + int ret; + + if (igbuio_kernel_is_locked_down()) { + pr_err("Not able to use module, kernel lock down is enabled\n"); + return -EINVAL; + } + + if (wc_activate != 0) + pr_info("wc_activate is set\n"); + + ret = igbuio_config_intr_mode(intr_mode); + if (ret < 0) + return ret; + + return pci_register_driver(&igbuio_pci_driver); +} + +static void __exit +igbuio_pci_exit_module(void) +{ + pci_unregister_driver(&igbuio_pci_driver); +} + +module_init(igbuio_pci_init_module); +module_exit(igbuio_pci_exit_module); + +module_param(intr_mode, charp, S_IRUGO); +MODULE_PARM_DESC(intr_mode, +"igb_uio interrupt mode (default=msix):\n" +" " RTE_INTR_MODE_MSIX_NAME " Use MSIX interrupt\n" +" " RTE_INTR_MODE_MSI_NAME " Use MSI interrupt\n" +" " RTE_INTR_MODE_LEGACY_NAME " Use Legacy interrupt\n" +"\n"); + +module_param(wc_activate, int, 0); +MODULE_PARM_DESC(wc_activate, +"Activate support for write combining (WC) (default=0)\n" +" 0 - disable\n" +" other - enable\n"); + +MODULE_DESCRIPTION("UIO driver for Intel IGB PCI cards"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Intel Corporation"); diff --git a/kernel/linux/igb_uio/meson.build b/kernel/linux/igb_uio/meson.build new file mode 100644 index 00000000..71ed2e7a --- /dev/null +++ b/kernel/linux/igb_uio/meson.build @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2017 Intel Corporation + +mkfile = custom_target('igb_uio_makefile', + output: 'Makefile', + command: ['touch', '@OUTPUT@']) + +custom_target('igb_uio', + input: ['igb_uio.c', 'Kbuild'], + output: 'igb_uio.ko', + command: ['make', '-C', kernel_dir, + 'M=' + meson.current_build_dir(), + 'src=' + meson.current_source_dir(), + 'EXTRA_CFLAGS=-I' + meson.current_source_dir() + + '/../../../lib/librte_eal/common/include', + 'modules'], + depends: mkfile, + build_by_default: get_option('enable_kmods')) diff --git a/kernel/linux/kni/Makefile b/kernel/linux/kni/Makefile new file mode 100644 index 00000000..282be7b6 --- /dev/null +++ b/kernel/linux/kni/Makefile @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2010-2014 Intel Corporation + +include $(RTE_SDK)/mk/rte.vars.mk + +# +# module name and path +# +MODULE = rte_kni + +# +# CFLAGS +# +MODULE_CFLAGS += -I$(SRCDIR) --param max-inline-insns-single=50 +MODULE_CFLAGS += -I$(RTE_OUTPUT)/include -I$(SRCDIR)/ethtool/ixgbe -I$(SRCDIR)/ethtool/igb +MODULE_CFLAGS += -include $(RTE_OUTPUT)/include/rte_config.h +MODULE_CFLAGS += -Wall -Werror + +-include /etc/lsb-release + +ifeq ($(DISTRIB_ID),Ubuntu) +MODULE_CFLAGS += -DUBUNTU_RELEASE_CODE=$(subst .,,$(DISTRIB_RELEASE)) +UBUNTU_KERNEL_CODE := $(shell echo `grep UTS_RELEASE $(RTE_KERNELDIR)/include/generated/utsrelease.h \ + | cut -d '"' -f2 | cut -d- -f1,2 | tr .- ,`,1) +MODULE_CFLAGS += -D"UBUNTU_KERNEL_CODE=UBUNTU_KERNEL_VERSION($(UBUNTU_KERNEL_CODE))" +endif + +# +# all source are stored in SRCS-y +# +SRCS-y := kni_misc.c +SRCS-y += kni_net.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += kni_ethtool.c + +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_main.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_api.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_common.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_ethtool.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_82599.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_82598.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_x540.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/ixgbe_phy.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/ixgbe/kcompat.c + +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_82575.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_i210.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_api.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_mac.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_manage.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_mbx.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_nvm.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/e1000_phy.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_ethtool.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_main.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_param.c +SRCS-$(CONFIG_RTE_KNI_KMOD_ETHTOOL) += ethtool/igb/igb_vmdq.c + +include $(RTE_SDK)/mk/rte.module.mk diff --git a/kernel/linux/kni/compat.h b/kernel/linux/kni/compat.h new file mode 100644 index 00000000..5aadebbc --- /dev/null +++ b/kernel/linux/kni/compat.h @@ -0,0 +1,112 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Minimal wrappers to allow compiling kni on older kernels. + */ + +#include <linux/version.h> + +#ifndef RHEL_RELEASE_VERSION +#define RHEL_RELEASE_VERSION(a, b) (((a) << 8) + (b)) +#endif + +/* SuSE version macro is the same as Linux kernel version */ +#ifndef SLE_VERSION +#define SLE_VERSION(a, b, c) KERNEL_VERSION(a, b, c) +#endif +#ifdef CONFIG_SUSE_KERNEL +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 4, 57)) +/* SLES12SP3 is at least 4.4.57+ based */ +#define SLE_VERSION_CODE SLE_VERSION(12, 3, 0) +#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 12, 28)) +/* SLES12 is at least 3.12.28+ based */ +#define SLE_VERSION_CODE SLE_VERSION(12, 0, 0) +#elif ((LINUX_VERSION_CODE >= KERNEL_VERSION(3, 0, 61)) && \ + (LINUX_VERSION_CODE < KERNEL_VERSION(3, 1, 0))) +/* SLES11 SP3 is at least 3.0.61+ based */ +#define SLE_VERSION_CODE SLE_VERSION(11, 3, 0) +#elif (LINUX_VERSION_CODE == KERNEL_VERSION(2, 6, 32)) +/* SLES11 SP1 is 2.6.32 based */ +#define SLE_VERSION_CODE SLE_VERSION(11, 1, 0) +#elif (LINUX_VERSION_CODE == KERNEL_VERSION(2, 6, 27)) +/* SLES11 GA is 2.6.27 based */ +#define SLE_VERSION_CODE SLE_VERSION(11, 0, 0) +#endif /* LINUX_VERSION_CODE == KERNEL_VERSION(x,y,z) */ +#endif /* CONFIG_SUSE_KERNEL */ +#ifndef SLE_VERSION_CODE +#define SLE_VERSION_CODE 0 +#endif /* SLE_VERSION_CODE */ + + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 39) && \ + (!(defined(RHEL_RELEASE_CODE) && \ + RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 4))) + +#define kstrtoul strict_strtoul + +#endif /* < 2.6.39 */ + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 33) +#define HAVE_SIMPLIFIED_PERNET_OPERATIONS +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 35) +#define sk_sleep(s) ((s)->sk_sleep) +#else +#define HAVE_SOCKET_WQ +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 7, 0) +#define HAVE_STATIC_SOCK_MAP_FD +#else +#define kni_sock_map_fd(s) sock_map_fd(s, 0) +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 9, 0) +#define HAVE_CHANGE_CARRIER_CB +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 14, 0) +#define ether_addr_copy(dst, src) memcpy(dst, src, ETH_ALEN) +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 19, 0) +#define HAVE_IOV_ITER_MSGHDR +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 1, 0) +#define HAVE_KIOCB_MSG_PARAM +#define HAVE_REBUILD_HEADER +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 2, 0) +#define HAVE_SK_ALLOC_KERN_PARAM +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 7, 0) || \ + (defined(RHEL_RELEASE_CODE) && \ + RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7, 4)) || \ + (SLE_VERSION_CODE && SLE_VERSION_CODE == SLE_VERSION(12, 3, 0)) +#define HAVE_TRANS_START_HELPER +#endif + +/* + * KNI uses NET_NAME_UNKNOWN macro to select correct version of alloc_netdev() + * For old kernels just backported the commit that enables the macro + * (685343fc3ba6) but still uses old API, it is required to undefine macro to + * select correct version of API, this is safe since KNI doesn't use the value. + * This fix is specific to RedHat/CentOS kernels. + */ +#if (defined(RHEL_RELEASE_CODE) && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 8)) && \ + (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34))) +#undef NET_NAME_UNKNOWN +#endif + +#if (defined(RHEL_RELEASE_CODE) && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7, 5))) +#define ndo_change_mtu ndo_change_mtu_rh74 +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 11, 0) +#define HAVE_SIGNAL_FUNCTIONS_OWN_HEADER +#endif diff --git a/kernel/linux/kni/ethtool/README b/kernel/linux/kni/ethtool/README new file mode 100644 index 00000000..af36738a --- /dev/null +++ b/kernel/linux/kni/ethtool/README @@ -0,0 +1,71 @@ +.. SPDX-License-Identifier: BSD-3-Clause + Copyright(c) 2010-2014 Intel Corporation. + +Description + +In order to support ethtool in Kernel NIC Interface, the standard Linux kernel +drivers of ixgbe/igb are needed to be reused here. ixgbe-3.9.17 is the version +modified from in kernel NIC interface kernel module to support ixgbe NIC, and +igb-3.4.8 is the version modified from in kernel NIC interface kernel module to +support igb NIC. + +The source code package of ixgbe can be downloaded from sourceforge.net as below. +http://sourceforge.net/projects/e1000/files/ixgbe%20stable/ +Below source files are copied or modified from ixgbe. + +ixgbe_82598.h +ixgbe_82599.c +ixgbe_82599.h +ixgbe_api.c +ixgbe_api.h +ixgbe_common.c +ixgbe_common.h +ixgbe_dcb.h +ixgbe_ethtool.c +ixgbe_fcoe.h +ixgbe.h +ixgbe_main.c +ixgbe_mbx.h +ixgbe_osdep.h +ixgbe_phy.c +ixgbe_phy.h +ixgbe_sriov.h +ixgbe_type.h +kcompat.c +kcompat.h + +The source code package of igb can be downloaded from sourceforge.net as below. +http://sourceforge.net/projects/e1000/files/igb%20stable/ +Below source files are copied or modified from igb. + +e1000_82575.c +e1000_82575.h +e1000_api.c +e1000_api.h +e1000_defines.h +e1000_hw.h +e1000_mac.c +e1000_mac.h +e1000_manage.c +e1000_manage.h +e1000_mbx.c +e1000_mbx.h +e1000_nvm.c +e1000_nvm.h +e1000_osdep.h +e1000_phy.c +e1000_phy.h +e1000_regs.h +igb_ethtool.c +igb.h +igb_main.c +igb_param.c +igb_procfs.c +igb_regtest.h +igb_sysfs.c +igb_vmdq.c +igb_vmdq.h +kcompat.c +kcompat_ethtool.c +kcompat.h + diff --git a/kernel/linux/kni/ethtool/igb/e1000_82575.c b/kernel/linux/kni/ethtool/igb/e1000_82575.c new file mode 100644 index 00000000..98346709 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_82575.c @@ -0,0 +1,3650 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* + * 82575EB Gigabit Network Connection + * 82575EB Gigabit Backplane Connection + * 82575GB Gigabit Network Connection + * 82576 Gigabit Network Connection + * 82576 Quad Port Gigabit Mezzanine Adapter + * 82580 Gigabit Network Connection + * I350 Gigabit Network Connection + */ + +#include "e1000_api.h" +#include "e1000_i210.h" + +static s32 e1000_init_phy_params_82575(struct e1000_hw *hw); +static s32 e1000_init_mac_params_82575(struct e1000_hw *hw); +static s32 e1000_acquire_phy_82575(struct e1000_hw *hw); +static void e1000_release_phy_82575(struct e1000_hw *hw); +static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw); +static void e1000_release_nvm_82575(struct e1000_hw *hw); +static s32 e1000_check_for_link_82575(struct e1000_hw *hw); +static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw); +static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw); +static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +static s32 e1000_init_hw_82575(struct e1000_hw *hw); +static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw); +static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, + u16 *data); +static s32 e1000_reset_hw_82575(struct e1000_hw *hw); +static s32 e1000_reset_hw_82580(struct e1000_hw *hw); +static s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, + u32 offset, u16 *data); +static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, + u32 offset, u16 data); +static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, + bool active); +static s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, + bool active); +static s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, + bool active); +static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw); +static s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw); +static s32 e1000_get_media_type_82575(struct e1000_hw *hw); +static s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw); +static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data); +static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, + u32 offset, u16 data); +static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw); +static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask); +static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, + u16 *speed, u16 *duplex); +static s32 e1000_get_phy_id_82575(struct e1000_hw *hw); +static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask); +static bool e1000_sgmii_active_82575(struct e1000_hw *hw); +static s32 e1000_reset_init_script_82575(struct e1000_hw *hw); +static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw); +static void e1000_config_collision_dist_82575(struct e1000_hw *hw); +static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw); +static void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw); +static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw); +static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw); +static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw); +static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw); +static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw); +static s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, + u16 offset); +static s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, + u16 offset); +static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw); +static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw); +static void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value); +static void e1000_clear_vfta_i350(struct e1000_hw *hw); + +static void e1000_i2c_start(struct e1000_hw *hw); +static void e1000_i2c_stop(struct e1000_hw *hw); +static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data); +static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data); +static s32 e1000_get_i2c_ack(struct e1000_hw *hw); +static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data); +static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data); +static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl); +static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl); +static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data); +static bool e1000_get_i2c_data(u32 *i2cctl); + +static const u16 e1000_82580_rxpbs_table[] = { + 36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 }; +#define E1000_82580_RXPBS_TABLE_SIZE \ + (sizeof(e1000_82580_rxpbs_table)/sizeof(u16)) + + +/** + * e1000_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO + * @hw: pointer to the HW structure + * + * Called to determine if the I2C pins are being used for I2C or as an + * external MDIO interface since the two options are mutually exclusive. + **/ +static bool e1000_sgmii_uses_mdio_82575(struct e1000_hw *hw) +{ + u32 reg = 0; + bool ext_mdio = false; + + DEBUGFUNC("e1000_sgmii_uses_mdio_82575"); + + switch (hw->mac.type) { + case e1000_82575: + case e1000_82576: + reg = E1000_READ_REG(hw, E1000_MDIC); + ext_mdio = !!(reg & E1000_MDIC_DEST); + break; + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + reg = E1000_READ_REG(hw, E1000_MDICNFG); + ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO); + break; + default: + break; + } + return ext_mdio; +} + +/** + * e1000_init_phy_params_82575 - Init PHY func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 e1000_init_phy_params_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u32 ctrl_ext; + + DEBUGFUNC("e1000_init_phy_params_82575"); + + phy->ops.read_i2c_byte = e1000_read_i2c_byte_generic; + phy->ops.write_i2c_byte = e1000_write_i2c_byte_generic; + + if (hw->phy.media_type != e1000_media_type_copper) { + phy->type = e1000_phy_none; + goto out; + } + + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_82575; + + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; + + phy->ops.acquire = e1000_acquire_phy_82575; + phy->ops.check_reset_block = e1000_check_reset_block_generic; + phy->ops.commit = e1000_phy_sw_reset_generic; + phy->ops.get_cfg_done = e1000_get_cfg_done_82575; + phy->ops.release = e1000_release_phy_82575; + + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + + if (e1000_sgmii_active_82575(hw)) { + phy->ops.reset = e1000_phy_hw_reset_sgmii_82575; + ctrl_ext |= E1000_CTRL_I2C_ENA; + } else { + phy->ops.reset = e1000_phy_hw_reset_generic; + ctrl_ext &= ~E1000_CTRL_I2C_ENA; + } + + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + e1000_reset_mdicnfg_82580(hw); + + if (e1000_sgmii_active_82575(hw) && !e1000_sgmii_uses_mdio_82575(hw)) { + phy->ops.read_reg = e1000_read_phy_reg_sgmii_82575; + phy->ops.write_reg = e1000_write_phy_reg_sgmii_82575; + } else { + switch (hw->mac.type) { + case e1000_82580: + case e1000_i350: + case e1000_i354: + phy->ops.read_reg = e1000_read_phy_reg_82580; + phy->ops.write_reg = e1000_write_phy_reg_82580; + break; + case e1000_i210: + case e1000_i211: + phy->ops.read_reg = e1000_read_phy_reg_gs40g; + phy->ops.write_reg = e1000_write_phy_reg_gs40g; + break; + default: + phy->ops.read_reg = e1000_read_phy_reg_igp; + phy->ops.write_reg = e1000_write_phy_reg_igp; + } + } + + /* Set phy->phy_addr and phy->id. */ + ret_val = e1000_get_phy_id_82575(hw); + + /* Verify phy id and set remaining function pointers */ + switch (phy->id) { + case M88E1543_E_PHY_ID: + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case M88E1111_I_PHY_ID: + phy->type = e1000_phy_m88; + phy->ops.check_polarity = e1000_check_polarity_m88; + phy->ops.get_info = e1000_get_phy_info_m88; + if (phy->id == I347AT4_E_PHY_ID || + phy->id == M88E1112_E_PHY_ID || + phy->id == M88E1340M_E_PHY_ID) + phy->ops.get_cable_length = + e1000_get_cable_length_m88_gen2; + else if (phy->id == M88E1543_E_PHY_ID) + phy->ops.get_cable_length = + e1000_get_cable_length_m88_gen2; + else + phy->ops.get_cable_length = e1000_get_cable_length_m88; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; + /* Check if this PHY is configured for media swap. */ + if (phy->id == M88E1112_E_PHY_ID) { + u16 data; + + ret_val = phy->ops.write_reg(hw, + E1000_M88E1112_PAGE_ADDR, + 2); + if (ret_val) + goto out; + + ret_val = phy->ops.read_reg(hw, + E1000_M88E1112_MAC_CTRL_1, + &data); + if (ret_val) + goto out; + + data = (data & E1000_M88E1112_MAC_CTRL_1_MODE_MASK) >> + E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT; + if (data == E1000_M88E1112_AUTO_COPPER_SGMII || + data == E1000_M88E1112_AUTO_COPPER_BASEX) + hw->mac.ops.check_for_link = + e1000_check_for_link_media_swap; + } + break; + case IGP03E1000_E_PHY_ID: + case IGP04E1000_E_PHY_ID: + phy->type = e1000_phy_igp_3; + phy->ops.check_polarity = e1000_check_polarity_igp; + phy->ops.get_info = e1000_get_phy_info_igp; + phy->ops.get_cable_length = e1000_get_cable_length_igp_2; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82575; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_generic; + break; + case I82580_I_PHY_ID: + case I350_I_PHY_ID: + phy->type = e1000_phy_82580; + phy->ops.check_polarity = e1000_check_polarity_82577; + phy->ops.force_speed_duplex = + e1000_phy_force_speed_duplex_82577; + phy->ops.get_cable_length = e1000_get_cable_length_82577; + phy->ops.get_info = e1000_get_phy_info_82577; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; + break; + case I210_I_PHY_ID: + phy->type = e1000_phy_i210; + phy->ops.check_polarity = e1000_check_polarity_m88; + phy->ops.get_info = e1000_get_phy_info_m88; + phy->ops.get_cable_length = e1000_get_cable_length_m88_gen2; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; + break; + default: + ret_val = -E1000_ERR_PHY; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_init_nvm_params_82575 - Init NVM func ptrs. + * @hw: pointer to the HW structure + **/ +s32 e1000_init_nvm_params_82575(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + u16 size; + + DEBUGFUNC("e1000_init_nvm_params_82575"); + + size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> + E1000_EECD_SIZE_EX_SHIFT); + /* + * Added to a constant, "size" becomes the left-shift value + * for setting word_size. + */ + size += NVM_WORD_SIZE_BASE_SHIFT; + + /* Just in case size is out of range, cap it to the largest + * EEPROM size supported + */ + if (size > 15) + size = 15; + + nvm->word_size = 1 << size; + if (hw->mac.type < e1000_i210) { + nvm->opcode_bits = 8; + nvm->delay_usec = 1; + + switch (nvm->override) { + case e1000_nvm_override_spi_large: + nvm->page_size = 32; + nvm->address_bits = 16; + break; + case e1000_nvm_override_spi_small: + nvm->page_size = 8; + nvm->address_bits = 8; + break; + default: + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? + 16 : 8; + break; + } + if (nvm->word_size == (1 << 15)) + nvm->page_size = 128; + + nvm->type = e1000_nvm_eeprom_spi; + } else { + nvm->type = e1000_nvm_flash_hw; + } + + /* Function Pointers */ + nvm->ops.acquire = e1000_acquire_nvm_82575; + nvm->ops.release = e1000_release_nvm_82575; + if (nvm->word_size < (1 << 15)) + nvm->ops.read = e1000_read_nvm_eerd; + else + nvm->ops.read = e1000_read_nvm_spi; + + nvm->ops.write = e1000_write_nvm_spi; + nvm->ops.validate = e1000_validate_nvm_checksum_generic; + nvm->ops.update = e1000_update_nvm_checksum_generic; + nvm->ops.valid_led_default = e1000_valid_led_default_82575; + + /* override generic family function pointers for specific descendants */ + switch (hw->mac.type) { + case e1000_82580: + nvm->ops.validate = e1000_validate_nvm_checksum_82580; + nvm->ops.update = e1000_update_nvm_checksum_82580; + break; + case e1000_i350: + //case e1000_i354: + nvm->ops.validate = e1000_validate_nvm_checksum_i350; + nvm->ops.update = e1000_update_nvm_checksum_i350; + break; + default: + break; + } + + return E1000_SUCCESS; +} + +/** + * e1000_init_mac_params_82575 - Init MAC func ptrs. + * @hw: pointer to the HW structure + **/ +static s32 e1000_init_mac_params_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + + DEBUGFUNC("e1000_init_mac_params_82575"); + + /* Derives media type */ + e1000_get_media_type_82575(hw); + /* Set mta register count */ + mac->mta_reg_count = 128; + /* Set uta register count */ + mac->uta_reg_count = (hw->mac.type == e1000_82575) ? 0 : 128; + /* Set rar entry count */ + mac->rar_entry_count = E1000_RAR_ENTRIES_82575; + if (mac->type == e1000_82576) + mac->rar_entry_count = E1000_RAR_ENTRIES_82576; + if (mac->type == e1000_82580) + mac->rar_entry_count = E1000_RAR_ENTRIES_82580; + if (mac->type == e1000_i350 || mac->type == e1000_i354) + mac->rar_entry_count = E1000_RAR_ENTRIES_I350; + + /* Enable EEE default settings for EEE supported devices */ + if (mac->type >= e1000_i350) + dev_spec->eee_disable = false; + + /* Allow a single clear of the SW semaphore on I210 and newer */ + if (mac->type >= e1000_i210) + dev_spec->clear_semaphore_once = true; + + /* Set if part includes ASF firmware */ + mac->asf_firmware_present = true; + /* FWSM register */ + mac->has_fwsm = true; + /* ARC supported; valid only if manageability features are enabled. */ + mac->arc_subsystem_valid = + !!(E1000_READ_REG(hw, E1000_FWSM) & E1000_FWSM_MODE_MASK); + + /* Function pointers */ + + /* bus type/speed/width */ + mac->ops.get_bus_info = e1000_get_bus_info_pcie_generic; + /* reset */ + if (mac->type >= e1000_82580) + mac->ops.reset_hw = e1000_reset_hw_82580; + else + mac->ops.reset_hw = e1000_reset_hw_82575; + /* hw initialization */ + mac->ops.init_hw = e1000_init_hw_82575; + /* link setup */ + mac->ops.setup_link = e1000_setup_link_generic; + /* physical interface link setup */ + mac->ops.setup_physical_interface = + (hw->phy.media_type == e1000_media_type_copper) + ? e1000_setup_copper_link_82575 : e1000_setup_serdes_link_82575; + /* physical interface shutdown */ + mac->ops.shutdown_serdes = e1000_shutdown_serdes_link_82575; + /* physical interface power up */ + mac->ops.power_up_serdes = e1000_power_up_serdes_link_82575; + /* check for link */ + mac->ops.check_for_link = e1000_check_for_link_82575; + /* read mac address */ + mac->ops.read_mac_addr = e1000_read_mac_addr_82575; + /* configure collision distance */ + mac->ops.config_collision_dist = e1000_config_collision_dist_82575; + /* multicast address update */ + mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic; + if (hw->mac.type == e1000_i350 || mac->type == e1000_i354) { + /* writing VFTA */ + mac->ops.write_vfta = e1000_write_vfta_i350; + /* clearing VFTA */ + mac->ops.clear_vfta = e1000_clear_vfta_i350; + } else { + /* writing VFTA */ + mac->ops.write_vfta = e1000_write_vfta_generic; + /* clearing VFTA */ + mac->ops.clear_vfta = e1000_clear_vfta_generic; + } + if (hw->mac.type >= e1000_82580) + mac->ops.validate_mdi_setting = + e1000_validate_mdi_setting_crossover_generic; + /* ID LED init */ + mac->ops.id_led_init = e1000_id_led_init_generic; + /* blink LED */ + mac->ops.blink_led = e1000_blink_led_generic; + /* setup LED */ + mac->ops.setup_led = e1000_setup_led_generic; + /* cleanup LED */ + mac->ops.cleanup_led = e1000_cleanup_led_generic; + /* turn on/off LED */ + mac->ops.led_on = e1000_led_on_generic; + mac->ops.led_off = e1000_led_off_generic; + /* clear hardware counters */ + mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82575; + /* link info */ + mac->ops.get_link_up_info = e1000_get_link_up_info_82575; + /* get thermal sensor data */ + mac->ops.get_thermal_sensor_data = + e1000_get_thermal_sensor_data_generic; + mac->ops.init_thermal_sensor_thresh = + e1000_init_thermal_sensor_thresh_generic; + /* acquire SW_FW sync */ + mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_82575; + mac->ops.release_swfw_sync = e1000_release_swfw_sync_82575; + if (mac->type >= e1000_i210) { + mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_i210; + mac->ops.release_swfw_sync = e1000_release_swfw_sync_i210; + } + + /* set lan id for port to determine which phy lock to use */ + hw->mac.ops.set_lan_id(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_init_function_pointers_82575 - Init func ptrs. + * @hw: pointer to the HW structure + * + * Called to initialize all function pointers and parameters. + **/ +void e1000_init_function_pointers_82575(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_init_function_pointers_82575"); + + hw->mac.ops.init_params = e1000_init_mac_params_82575; + hw->nvm.ops.init_params = e1000_init_nvm_params_82575; + hw->phy.ops.init_params = e1000_init_phy_params_82575; + hw->mbx.ops.init_params = e1000_init_mbx_params_pf; +} + +/** + * e1000_acquire_phy_82575 - Acquire rights to access PHY + * @hw: pointer to the HW structure + * + * Acquire access rights to the correct PHY. + **/ +static s32 e1000_acquire_phy_82575(struct e1000_hw *hw) +{ + u16 mask = E1000_SWFW_PHY0_SM; + + DEBUGFUNC("e1000_acquire_phy_82575"); + + if (hw->bus.func == E1000_FUNC_1) + mask = E1000_SWFW_PHY1_SM; + else if (hw->bus.func == E1000_FUNC_2) + mask = E1000_SWFW_PHY2_SM; + else if (hw->bus.func == E1000_FUNC_3) + mask = E1000_SWFW_PHY3_SM; + + return hw->mac.ops.acquire_swfw_sync(hw, mask); +} + +/** + * e1000_release_phy_82575 - Release rights to access PHY + * @hw: pointer to the HW structure + * + * A wrapper to release access rights to the correct PHY. + **/ +static void e1000_release_phy_82575(struct e1000_hw *hw) +{ + u16 mask = E1000_SWFW_PHY0_SM; + + DEBUGFUNC("e1000_release_phy_82575"); + + if (hw->bus.func == E1000_FUNC_1) + mask = E1000_SWFW_PHY1_SM; + else if (hw->bus.func == E1000_FUNC_2) + mask = E1000_SWFW_PHY2_SM; + else if (hw->bus.func == E1000_FUNC_3) + mask = E1000_SWFW_PHY3_SM; + + hw->mac.ops.release_swfw_sync(hw, mask); +} + +/** + * e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the serial gigabit media independent + * interface and stores the retrieved information in data. + **/ +static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, + u16 *data) +{ + s32 ret_val = -E1000_ERR_PARAM; + + DEBUGFUNC("e1000_read_phy_reg_sgmii_82575"); + + if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { + DEBUGOUT1("PHY Address %u is out of range\n", offset); + goto out; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + ret_val = e1000_read_phy_reg_i2c(hw, offset, data); + + hw->phy.ops.release(hw); + +out: + return ret_val; +} + +/** + * e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset using the serial gigabit + * media independent interface. + **/ +static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, + u16 data) +{ + s32 ret_val = -E1000_ERR_PARAM; + + DEBUGFUNC("e1000_write_phy_reg_sgmii_82575"); + + if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { + DEBUGOUT1("PHY Address %d is out of range\n", offset); + goto out; + } + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + ret_val = e1000_write_phy_reg_i2c(hw, offset, data); + + hw->phy.ops.release(hw); + +out: + return ret_val; +} + +/** + * e1000_get_phy_id_82575 - Retrieve PHY addr and id + * @hw: pointer to the HW structure + * + * Retrieves the PHY address and ID for both PHY's which do and do not use + * sgmi interface. + **/ +static s32 e1000_get_phy_id_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 phy_id; + u32 ctrl_ext; + u32 mdic; + + DEBUGFUNC("e1000_get_phy_id_82575"); + + /* i354 devices can have a PHY that needs an extra read for id */ + if (hw->mac.type == e1000_i354) + e1000_get_phy_id(hw); + + + /* + * For SGMII PHYs, we try the list of possible addresses until + * we find one that works. For non-SGMII PHYs + * (e.g. integrated copper PHYs), an address of 1 should + * work. The result of this function should mean phy->phy_addr + * and phy->id are set correctly. + */ + if (!e1000_sgmii_active_82575(hw)) { + phy->addr = 1; + ret_val = e1000_get_phy_id(hw); + goto out; + } + + if (e1000_sgmii_uses_mdio_82575(hw)) { + switch (hw->mac.type) { + case e1000_82575: + case e1000_82576: + mdic = E1000_READ_REG(hw, E1000_MDIC); + mdic &= E1000_MDIC_PHY_MASK; + phy->addr = mdic >> E1000_MDIC_PHY_SHIFT; + break; + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + mdic = E1000_READ_REG(hw, E1000_MDICNFG); + mdic &= E1000_MDICNFG_PHY_MASK; + phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT; + break; + default: + ret_val = -E1000_ERR_PHY; + goto out; + break; + } + ret_val = e1000_get_phy_id(hw); + goto out; + } + + /* Power on sgmii phy if it is disabled */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + E1000_WRITE_REG(hw, E1000_CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA); + E1000_WRITE_FLUSH(hw); + msec_delay(300); + + /* + * The address field in the I2CCMD register is 3 bits and 0 is invalid. + * Therefore, we need to test 1-7 + */ + for (phy->addr = 1; phy->addr < 8; phy->addr++) { + ret_val = e1000_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id); + if (ret_val == E1000_SUCCESS) { + DEBUGOUT2("Vendor ID 0x%08X read at address %u\n", + phy_id, phy->addr); + /* + * At the time of this writing, The M88 part is + * the only supported SGMII PHY product. + */ + if (phy_id == M88_VENDOR) + break; + } else { + DEBUGOUT1("PHY address %u was unreadable\n", + phy->addr); + } + } + + /* A valid PHY type couldn't be found. */ + if (phy->addr == 8) { + phy->addr = 0; + ret_val = -E1000_ERR_PHY; + } else { + ret_val = e1000_get_phy_id(hw); + } + + /* restore previous sfp cage power state */ + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + +out: + return ret_val; +} + +/** + * e1000_phy_hw_reset_sgmii_82575 - Performs a PHY reset + * @hw: pointer to the HW structure + * + * Resets the PHY using the serial gigabit media independent interface. + **/ +static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_phy_hw_reset_sgmii_82575"); + + /* + * This isn't a true "hard" reset, but is the only reset + * available to us at this time. + */ + + DEBUGOUT("Soft resetting SGMII attached PHY...\n"); + + if (!(hw->phy.ops.write_reg)) + goto out; + + /* + * SFP documentation requires the following to configure the SPF module + * to work on SGMII. No further documentation is given. + */ + ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084); + if (ret_val) + goto out; + + ret_val = hw->phy.ops.commit(hw); + +out: + return ret_val; +} + +/** + * e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state + * @hw: pointer to the HW structure + * @active: true to enable LPLU, false to disable + * + * Sets the LPLU D0 state according to the active flag. When + * activating LPLU this function also disables smart speed + * and vice versa. LPLU will not be activated unless the + * device autonegotiation advertisement meets standards of + * either 10 or 10/100 or 10/100/1000 at all duplexes. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +static s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 data; + + DEBUGFUNC("e1000_set_d0_lplu_state_82575"); + + if (!(hw->phy.ops.read_reg)) + goto out; + + ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); + if (ret_val) + goto out; + + if (active) { + data |= IGP02E1000_PM_D0_LPLU; + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); + if (ret_val) + goto out; + + /* When LPLU is enabled, we should disable SmartSpeed */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } else { + data &= ~IGP02E1000_PM_D0_LPLU; + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) { + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + goto out; + + data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } else if (phy->smart_speed == e1000_smart_speed_off) { + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + goto out; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + goto out; + } + } + +out: + return ret_val; +} + +/** + * e1000_set_d0_lplu_state_82580 - Set Low Power Linkup D0 state + * @hw: pointer to the HW structure + * @active: true to enable LPLU, false to disable + * + * Sets the LPLU D0 state according to the active flag. When + * activating LPLU this function also disables smart speed + * and vice versa. LPLU will not be activated unless the + * device autonegotiation advertisement meets standards of + * either 10 or 10/100 or 10/100/1000 at all duplexes. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u32 data; + + DEBUGFUNC("e1000_set_d0_lplu_state_82580"); + + data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); + + if (active) { + data |= E1000_82580_PM_D0_LPLU; + + /* When LPLU is enabled, we should disable SmartSpeed */ + data &= ~E1000_82580_PM_SPD; + } else { + data &= ~E1000_82580_PM_D0_LPLU; + + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) + data |= E1000_82580_PM_SPD; + else if (phy->smart_speed == e1000_smart_speed_off) + data &= ~E1000_82580_PM_SPD; + } + + E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data); + return ret_val; +} + +/** + * e1000_set_d3_lplu_state_82580 - Sets low power link up state for D3 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D3 + * and SmartSpeed is disabled when active is true, else clear lplu for D3 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. + **/ +s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u32 data; + + DEBUGFUNC("e1000_set_d3_lplu_state_82580"); + + data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); + + if (!active) { + data &= ~E1000_82580_PM_D3_LPLU; + /* + * LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) + data |= E1000_82580_PM_SPD; + else if (phy->smart_speed == e1000_smart_speed_off) + data &= ~E1000_82580_PM_SPD; + } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || + (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || + (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { + data |= E1000_82580_PM_D3_LPLU; + /* When LPLU is enabled, we should disable SmartSpeed */ + data &= ~E1000_82580_PM_SPD; + } + + E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data); + return ret_val; +} + +/** + * e1000_acquire_nvm_82575 - Request for access to EEPROM + * @hw: pointer to the HW structure + * + * Acquire the necessary semaphores for exclusive access to the EEPROM. + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -E1000_ERR_NVM (-1). + **/ +static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_acquire_nvm_82575"); + + ret_val = e1000_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); + if (ret_val) + goto out; + + /* + * Check if there is some access + * error this access may hook on + */ + if (hw->mac.type == e1000_i350) { + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + if (eecd & (E1000_EECD_BLOCKED | E1000_EECD_ABORT | + E1000_EECD_TIMEOUT)) { + /* Clear all access error flags */ + E1000_WRITE_REG(hw, E1000_EECD, eecd | + E1000_EECD_ERROR_CLR); + DEBUGOUT("Nvm bit banging access error detected and cleared.\n"); + } + } + if (hw->mac.type == e1000_82580) { + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + if (eecd & E1000_EECD_BLOCKED) { + /* Clear access error flag */ + E1000_WRITE_REG(hw, E1000_EECD, eecd | + E1000_EECD_BLOCKED); + DEBUGOUT("Nvm bit banging access error detected and cleared.\n"); + } + } + + + ret_val = e1000_acquire_nvm_generic(hw); + if (ret_val) + e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); + +out: + return ret_val; +} + +/** + * e1000_release_nvm_82575 - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit, + * then release the semaphores acquired. + **/ +static void e1000_release_nvm_82575(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_release_nvm_82575"); + + e1000_release_nvm_generic(hw); + + e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); +} + +/** + * e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Acquire the SW/FW semaphore to access the PHY or NVM. The mask + * will also specify which port we're acquiring the lock for. + **/ +static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + u32 fwmask = mask << 16; + s32 ret_val = E1000_SUCCESS; + s32 i = 0, timeout = 200; /* FIXME: find real value to use here */ + + DEBUGFUNC("e1000_acquire_swfw_sync_82575"); + + while (i < timeout) { + if (e1000_get_hw_semaphore_generic(hw)) { + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); + if (!(swfw_sync & (fwmask | swmask))) + break; + + /* + * Firmware currently using resource (fwmask) + * or other software thread using resource (swmask) + */ + e1000_put_hw_semaphore_generic(hw); + msec_delay_irq(5); + i++; + } + + if (i == timeout) { + DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n"); + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync |= swmask; + E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); + + e1000_put_hw_semaphore_generic(hw); + +out: + return ret_val; +} + +/** + * e1000_release_swfw_sync_82575 - Release SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Release the SW/FW semaphore used to access the PHY or NVM. The mask + * will also specify which port we're releasing the lock for. + **/ +static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + + DEBUGFUNC("e1000_release_swfw_sync_82575"); + + while (e1000_get_hw_semaphore_generic(hw) != E1000_SUCCESS) + ; /* Empty */ + + swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); + swfw_sync &= ~mask; + E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); + + e1000_put_hw_semaphore_generic(hw); +} + +/** + * e1000_get_cfg_done_82575 - Read config done bit + * @hw: pointer to the HW structure + * + * Read the management control register for the config done bit for + * completion status. NOTE: silicon which is EEPROM-less will fail trying + * to read the config done bit, so an error is *ONLY* logged and returns + * E1000_SUCCESS. If we were to return with error, EEPROM-less silicon + * would not be able to be reset or change link. + **/ +static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw) +{ + s32 timeout = PHY_CFG_TIMEOUT; + s32 ret_val = E1000_SUCCESS; + u32 mask = E1000_NVM_CFG_DONE_PORT_0; + + DEBUGFUNC("e1000_get_cfg_done_82575"); + + if (hw->bus.func == E1000_FUNC_1) + mask = E1000_NVM_CFG_DONE_PORT_1; + else if (hw->bus.func == E1000_FUNC_2) + mask = E1000_NVM_CFG_DONE_PORT_2; + else if (hw->bus.func == E1000_FUNC_3) + mask = E1000_NVM_CFG_DONE_PORT_3; + while (timeout) { + if (E1000_READ_REG(hw, E1000_EEMNGCTL) & mask) + break; + msec_delay(1); + timeout--; + } + if (!timeout) + DEBUGOUT("MNG configuration cycle has not completed.\n"); + + /* If EEPROM is not marked present, init the PHY manually */ + if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES) && + (hw->phy.type == e1000_phy_igp_3)) + e1000_phy_init_script_igp3(hw); + + return ret_val; +} + +/** + * e1000_get_link_up_info_82575 - Get link speed/duplex info + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * This is a wrapper function, if using the serial gigabit media independent + * interface, use PCS to retrieve the link speed and duplex information. + * Otherwise, use the generic function to get the link speed and duplex info. + **/ +static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + s32 ret_val; + + DEBUGFUNC("e1000_get_link_up_info_82575"); + + if (hw->phy.media_type != e1000_media_type_copper) + ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, speed, + duplex); + else + ret_val = e1000_get_speed_and_duplex_copper_generic(hw, speed, + duplex); + + return ret_val; +} + +/** + * e1000_check_for_link_82575 - Check for link + * @hw: pointer to the HW structure + * + * If sgmii is enabled, then use the pcs register to determine link, otherwise + * use the generic interface for determining link. + **/ +static s32 e1000_check_for_link_82575(struct e1000_hw *hw) +{ + s32 ret_val; + u16 speed, duplex; + + DEBUGFUNC("e1000_check_for_link_82575"); + + if (hw->phy.media_type != e1000_media_type_copper) { + ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, &speed, + &duplex); + /* + * Use this flag to determine if link needs to be checked or + * not. If we have link clear the flag so that we do not + * continue to check for link. + */ + hw->mac.get_link_status = !hw->mac.serdes_has_link; + + /* + * Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control + * settings because we may have had to re-autoneg with a + * different link partner. + */ + ret_val = e1000_config_fc_after_link_up_generic(hw); + if (ret_val) + DEBUGOUT("Error configuring flow control\n"); + } else { + ret_val = e1000_check_for_copper_link_generic(hw); + } + + return ret_val; +} + +/** + * e1000_check_for_link_media_swap - Check which M88E1112 interface linked + * @hw: pointer to the HW structure + * + * Poll the M88E1112 interfaces to see which interface achieved link. + */ +static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + u8 port = 0; + + DEBUGFUNC("e1000_check_for_link_media_swap"); + + /* Check the copper medium. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); + if (ret_val) + return ret_val; + + if (data & E1000_M88E1112_STATUS_LINK) + port = E1000_MEDIA_PORT_COPPER; + + /* Check the other medium. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); + if (ret_val) + return ret_val; + + if (data & E1000_M88E1112_STATUS_LINK) + port = E1000_MEDIA_PORT_OTHER; + + /* Determine if a swap needs to happen. */ + if (port && (hw->dev_spec._82575.media_port != port)) { + hw->dev_spec._82575.media_port = port; + hw->dev_spec._82575.media_changed = true; + } else { + ret_val = e1000_check_for_link_82575(hw); + } + + return E1000_SUCCESS; +} + +/** + * e1000_power_up_serdes_link_82575 - Power up the serdes link after shutdown + * @hw: pointer to the HW structure + **/ +static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw) +{ + u32 reg; + + DEBUGFUNC("e1000_power_up_serdes_link_82575"); + + if ((hw->phy.media_type != e1000_media_type_internal_serdes) && + !e1000_sgmii_active_82575(hw)) + return; + + /* Enable PCS to turn on link */ + reg = E1000_READ_REG(hw, E1000_PCS_CFG0); + reg |= E1000_PCS_CFG_PCS_EN; + E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); + + /* Power up the laser */ + reg = E1000_READ_REG(hw, E1000_CTRL_EXT); + reg &= ~E1000_CTRL_EXT_SDP3_DATA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); + + /* flush the write to verify completion */ + E1000_WRITE_FLUSH(hw); + msec_delay(1); +} + +/** + * e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * Using the physical coding sub-layer (PCS), retrieve the current speed and + * duplex, then store the values in the pointers provided. + **/ +static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, + u16 *speed, u16 *duplex) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 pcs; + u32 status; + + DEBUGFUNC("e1000_get_pcs_speed_and_duplex_82575"); + + /* + * Read the PCS Status register for link state. For non-copper mode, + * the status register is not accurate. The PCS status register is + * used instead. + */ + pcs = E1000_READ_REG(hw, E1000_PCS_LSTAT); + + /* + * The link up bit determines when link is up on autoneg. + */ + if (pcs & E1000_PCS_LSTS_LINK_OK) { + mac->serdes_has_link = true; + + /* Detect and store PCS speed */ + if (pcs & E1000_PCS_LSTS_SPEED_1000) + *speed = SPEED_1000; + else if (pcs & E1000_PCS_LSTS_SPEED_100) + *speed = SPEED_100; + else + *speed = SPEED_10; + + /* Detect and store PCS duplex */ + if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + /* Check if it is an I354 2.5Gb backplane connection. */ + if (mac->type == e1000_i354) { + status = E1000_READ_REG(hw, E1000_STATUS); + if ((status & E1000_STATUS_2P5_SKU) && + !(status & E1000_STATUS_2P5_SKU_OVER)) { + *speed = SPEED_2500; + *duplex = FULL_DUPLEX; + DEBUGOUT("2500 Mbs, "); + DEBUGOUT("Full Duplex\n"); + } + } + + } else { + mac->serdes_has_link = false; + *speed = 0; + *duplex = 0; + } + + return E1000_SUCCESS; +} + +/** + * e1000_shutdown_serdes_link_82575 - Remove link during power down + * @hw: pointer to the HW structure + * + * In the case of serdes shut down sfp and PCS on driver unload + * when management pass through is not enabled. + **/ +void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw) +{ + u32 reg; + + DEBUGFUNC("e1000_shutdown_serdes_link_82575"); + + if ((hw->phy.media_type != e1000_media_type_internal_serdes) && + !e1000_sgmii_active_82575(hw)) + return; + + if (!e1000_enable_mng_pass_thru(hw)) { + /* Disable PCS to turn off link */ + reg = E1000_READ_REG(hw, E1000_PCS_CFG0); + reg &= ~E1000_PCS_CFG_PCS_EN; + E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); + + /* shutdown the laser */ + reg = E1000_READ_REG(hw, E1000_CTRL_EXT); + reg |= E1000_CTRL_EXT_SDP3_DATA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); + + /* flush the write to verify completion */ + E1000_WRITE_FLUSH(hw); + msec_delay(1); + } + + return; +} + +/** + * e1000_reset_hw_82575 - Reset hardware + * @hw: pointer to the HW structure + * + * This resets the hardware into a known state. + **/ +static s32 e1000_reset_hw_82575(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val; + + DEBUGFUNC("e1000_reset_hw_82575"); + + /* + * Prevent the PCI-E bus from sticking if there is no TLP connection + * on the last TLP read/write transaction when MAC is reset. + */ + ret_val = e1000_disable_pcie_master_generic(hw); + if (ret_val) + DEBUGOUT("PCI-E Master disable polling has failed.\n"); + + /* set the completion timeout for interface */ + ret_val = e1000_set_pcie_completion_timeout(hw); + if (ret_val) + DEBUGOUT("PCI-E Set completion timeout has failed.\n"); + + DEBUGOUT("Masking off all interrupts\n"); + E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); + + E1000_WRITE_REG(hw, E1000_RCTL, 0); + E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP); + E1000_WRITE_FLUSH(hw); + + msec_delay(10); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + + DEBUGOUT("Issuing a global reset to MAC\n"); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST); + + ret_val = e1000_get_auto_rd_done_generic(hw); + if (ret_val) { + /* + * When auto config read does not complete, do not + * return with an error. This can happen in situations + * where there is no eeprom and prevents getting link. + */ + DEBUGOUT("Auto Read Done did not complete\n"); + } + + /* If EEPROM is not present, run manual init scripts */ + if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES)) + e1000_reset_init_script_82575(hw); + + /* Clear any pending interrupt events. */ + E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); + E1000_READ_REG(hw, E1000_ICR); + + /* Install any alternate MAC address into RAR0 */ + ret_val = e1000_check_alt_mac_addr_generic(hw); + + return ret_val; +} + +/** + * e1000_init_hw_82575 - Initialize hardware + * @hw: pointer to the HW structure + * + * This inits the hardware readying it for operation. + **/ +static s32 e1000_init_hw_82575(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + u16 i, rar_count = mac->rar_entry_count; + + DEBUGFUNC("e1000_init_hw_82575"); + + /* Initialize identification LED */ + ret_val = mac->ops.id_led_init(hw); + if (ret_val) { + DEBUGOUT("Error initializing identification LED\n"); + /* This is not fatal and we should not stop init due to this */ + } + + /* Disabling VLAN filtering */ + DEBUGOUT("Initializing the IEEE VLAN\n"); + mac->ops.clear_vfta(hw); + + /* Setup the receive address */ + e1000_init_rx_addrs_generic(hw, rar_count); + + /* Zero out the Multicast HASH table */ + DEBUGOUT("Zeroing the MTA\n"); + for (i = 0; i < mac->mta_reg_count; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); + + /* Zero out the Unicast HASH table */ + DEBUGOUT("Zeroing the UTA\n"); + for (i = 0; i < mac->uta_reg_count; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_UTA, i, 0); + + /* Setup link and flow control */ + ret_val = mac->ops.setup_link(hw); + + /* Set the default MTU size */ + hw->dev_spec._82575.mtu = 1500; + + /* + * Clear all of the statistics registers (clear on read). It is + * important that we do this after we have tried to establish link + * because the symbol error count will increment wildly if there + * is no link. + */ + e1000_clear_hw_cntrs_82575(hw); + + return ret_val; +} + +/** + * e1000_setup_copper_link_82575 - Configure copper link settings + * @hw: pointer to the HW structure + * + * Configures the link for auto-neg or forced speed and duplex. Then we check + * for link, once link is established calls to configure collision distance + * and flow control are called. + **/ +static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val; + u32 phpm_reg; + + DEBUGFUNC("e1000_setup_copper_link_82575"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= E1000_CTRL_SLU; + ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Clear Go Link Disconnect bit on supported devices */ + switch (hw->mac.type) { + case e1000_82580: + case e1000_i350: + case e1000_i210: + case e1000_i211: + phpm_reg = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); + phpm_reg &= ~E1000_82580_PM_GO_LINKD; + E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, phpm_reg); + break; + default: + break; + } + + ret_val = e1000_setup_serdes_link_82575(hw); + if (ret_val) + goto out; + + if (e1000_sgmii_active_82575(hw) && !hw->phy.reset_disable) { + /* allow time for SFP cage time to power up phy */ + msec_delay(300); + + ret_val = hw->phy.ops.reset(hw); + if (ret_val) { + DEBUGOUT("Error resetting the PHY.\n"); + goto out; + } + } + switch (hw->phy.type) { + case e1000_phy_i210: + case e1000_phy_m88: + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case M88E1543_E_PHY_ID: + case I210_I_PHY_ID: + ret_val = e1000_copper_link_setup_m88_gen2(hw); + break; + default: + ret_val = e1000_copper_link_setup_m88(hw); + break; + } + break; + case e1000_phy_igp_3: + ret_val = e1000_copper_link_setup_igp(hw); + break; + case e1000_phy_82580: + ret_val = e1000_copper_link_setup_82577(hw); + break; + default: + ret_val = -E1000_ERR_PHY; + break; + } + + if (ret_val) + goto out; + + ret_val = e1000_setup_copper_link_generic(hw); +out: + return ret_val; +} + +/** + * e1000_setup_serdes_link_82575 - Setup link for serdes + * @hw: pointer to the HW structure + * + * Configure the physical coding sub-layer (PCS) link. The PCS link is + * used on copper connections where the serialized gigabit media independent + * interface (sgmii), or serdes fiber is being used. Configures the link + * for auto-negotiation or forces speed/duplex. + **/ +static s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw) +{ + u32 ctrl_ext, ctrl_reg, reg, anadv_reg; + bool pcs_autoneg; + s32 ret_val = E1000_SUCCESS; + u16 data; + + DEBUGFUNC("e1000_setup_serdes_link_82575"); + + if ((hw->phy.media_type != e1000_media_type_internal_serdes) && + !e1000_sgmii_active_82575(hw)) + return ret_val; + + /* + * On the 82575, SerDes loopback mode persists until it is + * explicitly turned off or a power cycle is performed. A read to + * the register does not indicate its status. Therefore, we ensure + * loopback mode is disabled during initialization. + */ + E1000_WRITE_REG(hw, E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); + + /* power on the sfp cage if present */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + + ctrl_reg = E1000_READ_REG(hw, E1000_CTRL); + ctrl_reg |= E1000_CTRL_SLU; + + /* set both sw defined pins on 82575/82576*/ + if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) + ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1; + + reg = E1000_READ_REG(hw, E1000_PCS_LCTL); + + /* default pcs_autoneg to the same setting as mac autoneg */ + pcs_autoneg = hw->mac.autoneg; + + switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) { + case E1000_CTRL_EXT_LINK_MODE_SGMII: + /* sgmii mode lets the phy handle forcing speed/duplex */ + pcs_autoneg = true; + /* autoneg time out should be disabled for SGMII mode */ + reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT); + break; + case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: + /* disable PCS autoneg and support parallel detect only */ + pcs_autoneg = false; + /* fall through to default case */ + default: + if (hw->mac.type == e1000_82575 || + hw->mac.type == e1000_82576) { + ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT) + pcs_autoneg = false; + } + + /* + * non-SGMII modes only supports a speed of 1000/Full for the + * link so it is best to just force the MAC and let the pcs + * link either autoneg or be forced to 1000/Full + */ + ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD | + E1000_CTRL_FD | E1000_CTRL_FRCDPX; + + /* set speed of 1000/Full if speed/duplex is forced */ + reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL; + break; + } + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl_reg); + + /* + * New SerDes mode allows for forcing speed or autonegotiating speed + * at 1gb. Autoneg should be default set by most drivers. This is the + * mode that will be compatible with older link partners and switches. + * However, both are supported by the hardware and some drivers/tools. + */ + reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP | + E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); + + if (pcs_autoneg) { + /* Set PCS register for autoneg */ + reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ + E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ + + /* Disable force flow control for autoneg */ + reg &= ~E1000_PCS_LCTL_FORCE_FCTRL; + + /* Configure flow control advertisement for autoneg */ + anadv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV); + anadv_reg &= ~(E1000_TXCW_ASM_DIR | E1000_TXCW_PAUSE); + + switch (hw->fc.requested_mode) { + case e1000_fc_full: + case e1000_fc_rx_pause: + anadv_reg |= E1000_TXCW_ASM_DIR; + anadv_reg |= E1000_TXCW_PAUSE; + break; + case e1000_fc_tx_pause: + anadv_reg |= E1000_TXCW_ASM_DIR; + break; + default: + break; + } + + E1000_WRITE_REG(hw, E1000_PCS_ANADV, anadv_reg); + + DEBUGOUT1("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg); + } else { + /* Set PCS register for forced link */ + reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ + + /* Force flow control for forced link */ + reg |= E1000_PCS_LCTL_FORCE_FCTRL; + + DEBUGOUT1("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg); + } + + E1000_WRITE_REG(hw, E1000_PCS_LCTL, reg); + + if (!pcs_autoneg && !e1000_sgmii_active_82575(hw)) + e1000_force_mac_fc_generic(hw); + + return ret_val; +} + +/** + * e1000_get_media_type_82575 - derives current media type. + * @hw: pointer to the HW structure + * + * The media type is chosen reflecting few settings. + * The following are taken into account: + * - link mode set in the current port Init Control Word #3 + * - current link mode settings in CSR register + * - MDIO vs. I2C PHY control interface chosen + * - SFP module media type + **/ +static s32 e1000_get_media_type_82575(struct e1000_hw *hw) +{ + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + s32 ret_val = E1000_SUCCESS; + u32 ctrl_ext = 0; + u32 link_mode = 0; + + /* Set internal phy as default */ + dev_spec->sgmii_active = false; + dev_spec->module_plugged = false; + + /* Get CSR setting */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + + /* extract link mode setting */ + link_mode = ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK; + + switch (link_mode) { + case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: + hw->phy.media_type = e1000_media_type_internal_serdes; + break; + case E1000_CTRL_EXT_LINK_MODE_GMII: + hw->phy.media_type = e1000_media_type_copper; + break; + case E1000_CTRL_EXT_LINK_MODE_SGMII: + /* Get phy control interface type set (MDIO vs. I2C)*/ + if (e1000_sgmii_uses_mdio_82575(hw)) { + hw->phy.media_type = e1000_media_type_copper; + dev_spec->sgmii_active = true; + break; + } + /* fall through for I2C based SGMII */ + case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: + /* read media type from SFP EEPROM */ + ret_val = e1000_set_sfp_media_type_82575(hw); + if ((ret_val != E1000_SUCCESS) || + (hw->phy.media_type == e1000_media_type_unknown)) { + /* + * If media type was not identified then return media + * type defined by the CTRL_EXT settings. + */ + hw->phy.media_type = e1000_media_type_internal_serdes; + + if (link_mode == E1000_CTRL_EXT_LINK_MODE_SGMII) { + hw->phy.media_type = e1000_media_type_copper; + dev_spec->sgmii_active = true; + } + + break; + } + + /* do not change link mode for 100BaseFX */ + if (dev_spec->eth_flags.e100_base_fx) + break; + + /* change current link mode setting */ + ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK; + + if (hw->phy.media_type == e1000_media_type_copper) + ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_SGMII; + else + ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; + + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + + break; + } + + return ret_val; +} + +/** + * e1000_set_sfp_media_type_82575 - derives SFP module media type. + * @hw: pointer to the HW structure + * + * The media type is chosen based on SFP module. + * compatibility flags retrieved from SFP ID EEPROM. + **/ +static s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw) +{ + s32 ret_val = E1000_ERR_CONFIG; + u32 ctrl_ext = 0; + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + struct sfp_e1000_flags *eth_flags = &dev_spec->eth_flags; + u8 tranceiver_type = 0; + s32 timeout = 3; + + /* Turn I2C interface ON and power on sfp cage */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_I2C_ENA); + + E1000_WRITE_FLUSH(hw); + + /* Read SFP module data */ + while (timeout) { + ret_val = e1000_read_sfp_data_byte(hw, + E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_IDENTIFIER_OFFSET), + &tranceiver_type); + if (ret_val == E1000_SUCCESS) + break; + msec_delay(100); + timeout--; + } + if (ret_val != E1000_SUCCESS) + goto out; + + ret_val = e1000_read_sfp_data_byte(hw, + E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_ETH_FLAGS_OFFSET), + (u8 *)eth_flags); + if (ret_val != E1000_SUCCESS) + goto out; + + /* Check if there is some SFP module plugged and powered */ + if ((tranceiver_type == E1000_SFF_IDENTIFIER_SFP) || + (tranceiver_type == E1000_SFF_IDENTIFIER_SFF)) { + dev_spec->module_plugged = true; + if (eth_flags->e1000_base_lx || eth_flags->e1000_base_sx) { + hw->phy.media_type = e1000_media_type_internal_serdes; + } else if (eth_flags->e100_base_fx) { + dev_spec->sgmii_active = true; + hw->phy.media_type = e1000_media_type_internal_serdes; + } else if (eth_flags->e1000_base_t) { + dev_spec->sgmii_active = true; + hw->phy.media_type = e1000_media_type_copper; + } else { + hw->phy.media_type = e1000_media_type_unknown; + DEBUGOUT("PHY module has not been recognized\n"); + goto out; + } + } else { + hw->phy.media_type = e1000_media_type_unknown; + } + ret_val = E1000_SUCCESS; +out: + /* Restore I2C interface setting */ + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + return ret_val; +} + +/** + * e1000_valid_led_default_82575 - Verify a valid default LED config + * @hw: pointer to the HW structure + * @data: pointer to the NVM (EEPROM) + * + * Read the EEPROM for the current default LED configuration. If the + * LED configuration is not valid, set to a valid LED configuration. + **/ +static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_valid_led_default_82575"); + + ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + + if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) { + switch (hw->phy.media_type) { + case e1000_media_type_internal_serdes: + *data = ID_LED_DEFAULT_82575_SERDES; + break; + case e1000_media_type_copper: + default: + *data = ID_LED_DEFAULT; + break; + } + } +out: + return ret_val; +} + +/** + * e1000_sgmii_active_82575 - Return sgmii state + * @hw: pointer to the HW structure + * + * 82575 silicon has a serialized gigabit media independent interface (sgmii) + * which can be enabled for use in the embedded applications. Simply + * return the current state of the sgmii interface. + **/ +static bool e1000_sgmii_active_82575(struct e1000_hw *hw) +{ + struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; + return dev_spec->sgmii_active; +} + +/** + * e1000_reset_init_script_82575 - Inits HW defaults after reset + * @hw: pointer to the HW structure + * + * Inits recommended HW defaults after a reset when there is no EEPROM + * detected. This is only for the 82575. + **/ +static s32 e1000_reset_init_script_82575(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_reset_init_script_82575"); + + if (hw->mac.type == e1000_82575) { + DEBUGOUT("Running reset init script for 82575\n"); + /* SerDes configuration via SERDESCTRL */ + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x00, 0x0C); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x01, 0x78); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x1B, 0x23); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x23, 0x15); + + /* CCM configuration via CCMCTL register */ + e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x14, 0x00); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x10, 0x00); + + /* PCIe lanes configuration */ + e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x00, 0xEC); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x61, 0xDF); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x34, 0x05); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x2F, 0x81); + + /* PCIe PLL Configuration */ + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x02, 0x47); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x14, 0x00); + e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x10, 0x00); + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_mac_addr_82575 - Read device MAC address + * @hw: pointer to the HW structure + **/ +static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_read_mac_addr_82575"); + + /* + * If there's an alternate MAC address place it in RAR0 + * so that it will override the Si installed default perm + * address. + */ + ret_val = e1000_check_alt_mac_addr_generic(hw); + if (ret_val) + goto out; + + ret_val = e1000_read_mac_addr_generic(hw); + +out: + return ret_val; +} + +/** + * e1000_config_collision_dist_82575 - Configure collision distance + * @hw: pointer to the HW structure + * + * Configures the collision distance to the default value and is used + * during link setup. + **/ +static void e1000_config_collision_dist_82575(struct e1000_hw *hw) +{ + u32 tctl_ext; + + DEBUGFUNC("e1000_config_collision_dist_82575"); + + tctl_ext = E1000_READ_REG(hw, E1000_TCTL_EXT); + + tctl_ext &= ~E1000_TCTL_EXT_COLD; + tctl_ext |= E1000_COLLISION_DISTANCE << E1000_TCTL_EXT_COLD_SHIFT; + + E1000_WRITE_REG(hw, E1000_TCTL_EXT, tctl_ext); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_power_down_phy_copper_82575 - Remove link during PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, remove the link. + **/ +static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + + if (!(phy->ops.check_reset_block)) + return; + + /* If the management interface is not enabled, then power down */ + if (!(e1000_enable_mng_pass_thru(hw) || phy->ops.check_reset_block(hw))) + e1000_power_down_phy_copper(hw); + + return; +} + +/** + * e1000_clear_hw_cntrs_82575 - Clear device specific hardware counters + * @hw: pointer to the HW structure + * + * Clears the hardware counters by reading the counter registers. + **/ +static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_clear_hw_cntrs_82575"); + + e1000_clear_hw_cntrs_base_generic(hw); + + E1000_READ_REG(hw, E1000_PRC64); + E1000_READ_REG(hw, E1000_PRC127); + E1000_READ_REG(hw, E1000_PRC255); + E1000_READ_REG(hw, E1000_PRC511); + E1000_READ_REG(hw, E1000_PRC1023); + E1000_READ_REG(hw, E1000_PRC1522); + E1000_READ_REG(hw, E1000_PTC64); + E1000_READ_REG(hw, E1000_PTC127); + E1000_READ_REG(hw, E1000_PTC255); + E1000_READ_REG(hw, E1000_PTC511); + E1000_READ_REG(hw, E1000_PTC1023); + E1000_READ_REG(hw, E1000_PTC1522); + + E1000_READ_REG(hw, E1000_ALGNERRC); + E1000_READ_REG(hw, E1000_RXERRC); + E1000_READ_REG(hw, E1000_TNCRS); + E1000_READ_REG(hw, E1000_CEXTERR); + E1000_READ_REG(hw, E1000_TSCTC); + E1000_READ_REG(hw, E1000_TSCTFC); + + E1000_READ_REG(hw, E1000_MGTPRC); + E1000_READ_REG(hw, E1000_MGTPDC); + E1000_READ_REG(hw, E1000_MGTPTC); + + E1000_READ_REG(hw, E1000_IAC); + E1000_READ_REG(hw, E1000_ICRXOC); + + E1000_READ_REG(hw, E1000_ICRXPTC); + E1000_READ_REG(hw, E1000_ICRXATC); + E1000_READ_REG(hw, E1000_ICTXPTC); + E1000_READ_REG(hw, E1000_ICTXATC); + E1000_READ_REG(hw, E1000_ICTXQEC); + E1000_READ_REG(hw, E1000_ICTXQMTC); + E1000_READ_REG(hw, E1000_ICRXDMTC); + + E1000_READ_REG(hw, E1000_CBTMPC); + E1000_READ_REG(hw, E1000_HTDPMC); + E1000_READ_REG(hw, E1000_CBRMPC); + E1000_READ_REG(hw, E1000_RPTHC); + E1000_READ_REG(hw, E1000_HGPTC); + E1000_READ_REG(hw, E1000_HTCBDPC); + E1000_READ_REG(hw, E1000_HGORCL); + E1000_READ_REG(hw, E1000_HGORCH); + E1000_READ_REG(hw, E1000_HGOTCL); + E1000_READ_REG(hw, E1000_HGOTCH); + E1000_READ_REG(hw, E1000_LENERRS); + + /* This register should not be read in copper configurations */ + if ((hw->phy.media_type == e1000_media_type_internal_serdes) || + e1000_sgmii_active_82575(hw)) + E1000_READ_REG(hw, E1000_SCVPC); +} + +/** + * e1000_rx_fifo_flush_82575 - Clean rx fifo after Rx enable + * @hw: pointer to the HW structure + * + * After rx enable if managability is enabled then there is likely some + * bad data at the start of the fifo and possibly in the DMA fifo. This + * function clears the fifos and flushes any packets that came in as rx was + * being enabled. + **/ +void e1000_rx_fifo_flush_82575(struct e1000_hw *hw) +{ + u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled; + int i, ms_wait; + + DEBUGFUNC("e1000_rx_fifo_workaround_82575"); + if (hw->mac.type != e1000_82575 || + !(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN)) + return; + + /* Disable all Rx queues */ + for (i = 0; i < 4; i++) { + rxdctl[i] = E1000_READ_REG(hw, E1000_RXDCTL(i)); + E1000_WRITE_REG(hw, E1000_RXDCTL(i), + rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE); + } + /* Poll all queues to verify they have shut down */ + for (ms_wait = 0; ms_wait < 10; ms_wait++) { + msec_delay(1); + rx_enabled = 0; + for (i = 0; i < 4; i++) + rx_enabled |= E1000_READ_REG(hw, E1000_RXDCTL(i)); + if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE)) + break; + } + + if (ms_wait == 10) + DEBUGOUT("Queue disable timed out after 10ms\n"); + + /* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all + * incoming packets are rejected. Set enable and wait 2ms so that + * any packet that was coming in as RCTL.EN was set is flushed + */ + rfctl = E1000_READ_REG(hw, E1000_RFCTL); + E1000_WRITE_REG(hw, E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF); + + rlpml = E1000_READ_REG(hw, E1000_RLPML); + E1000_WRITE_REG(hw, E1000_RLPML, 0); + + rctl = E1000_READ_REG(hw, E1000_RCTL); + temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP); + temp_rctl |= E1000_RCTL_LPE; + + E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl); + E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl | E1000_RCTL_EN); + E1000_WRITE_FLUSH(hw); + msec_delay(2); + + /* Enable Rx queues that were previously enabled and restore our + * previous state + */ + for (i = 0; i < 4; i++) + E1000_WRITE_REG(hw, E1000_RXDCTL(i), rxdctl[i]); + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + E1000_WRITE_FLUSH(hw); + + E1000_WRITE_REG(hw, E1000_RLPML, rlpml); + E1000_WRITE_REG(hw, E1000_RFCTL, rfctl); + + /* Flush receive errors generated by workaround */ + E1000_READ_REG(hw, E1000_ROC); + E1000_READ_REG(hw, E1000_RNBC); + E1000_READ_REG(hw, E1000_MPC); +} + +/** + * e1000_set_pcie_completion_timeout - set pci-e completion timeout + * @hw: pointer to the HW structure + * + * The defaults for 82575 and 82576 should be in the range of 50us to 50ms, + * however the hardware default for these parts is 500us to 1ms which is less + * than the 10ms recommended by the pci-e spec. To address this we need to + * increase the value to either 10ms to 200ms for capability version 1 config, + * or 16ms to 55ms for version 2. + **/ +static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw) +{ + u32 gcr = E1000_READ_REG(hw, E1000_GCR); + s32 ret_val = E1000_SUCCESS; + u16 pcie_devctl2; + + /* only take action if timeout value is defaulted to 0 */ + if (gcr & E1000_GCR_CMPL_TMOUT_MASK) + goto out; + + /* + * if capababilities version is type 1 we can write the + * timeout of 10ms to 200ms through the GCR register + */ + if (!(gcr & E1000_GCR_CAP_VER2)) { + gcr |= E1000_GCR_CMPL_TMOUT_10ms; + goto out; + } + + /* + * for version 2 capabilities we need to write the config space + * directly in order to set the completion timeout value for + * 16ms to 55ms + */ + ret_val = e1000_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, + &pcie_devctl2); + if (ret_val) + goto out; + + pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms; + + ret_val = e1000_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, + &pcie_devctl2); +out: + /* disable completion timeout resend */ + gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND; + + E1000_WRITE_REG(hw, E1000_GCR, gcr); + return ret_val; +} + +/** + * e1000_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing + * @hw: pointer to the hardware struct + * @enable: state to enter, either enabled or disabled + * @pf: Physical Function pool - do not set anti-spoofing for the PF + * + * enables/disables L2 switch anti-spoofing functionality. + **/ +void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf) +{ + u32 reg_val, reg_offset; + + switch (hw->mac.type) { + case e1000_82576: + reg_offset = E1000_DTXSWC; + break; + case e1000_i350: + case e1000_i354: + reg_offset = E1000_TXSWC; + break; + default: + return; + } + + reg_val = E1000_READ_REG(hw, reg_offset); + if (enable) { + reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); + /* The PF can spoof - it has to in order to + * support emulation mode NICs + */ + reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); + } else { + reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | + E1000_DTXSWC_VLAN_SPOOF_MASK); + } + E1000_WRITE_REG(hw, reg_offset, reg_val); +} + +/** + * e1000_vmdq_set_loopback_pf - enable or disable vmdq loopback + * @hw: pointer to the hardware struct + * @enable: state to enter, either enabled or disabled + * + * enables/disables L2 switch loopback functionality. + **/ +void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable) +{ + u32 dtxswc; + + switch (hw->mac.type) { + case e1000_82576: + dtxswc = E1000_READ_REG(hw, E1000_DTXSWC); + if (enable) + dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN; + else + dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; + E1000_WRITE_REG(hw, E1000_DTXSWC, dtxswc); + break; + case e1000_i350: + case e1000_i354: + dtxswc = E1000_READ_REG(hw, E1000_TXSWC); + if (enable) + dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN; + else + dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; + E1000_WRITE_REG(hw, E1000_TXSWC, dtxswc); + break; + default: + /* Currently no other hardware supports loopback */ + break; + } + + +} + +/** + * e1000_vmdq_set_replication_pf - enable or disable vmdq replication + * @hw: pointer to the hardware struct + * @enable: state to enter, either enabled or disabled + * + * enables/disables replication of packets across multiple pools. + **/ +void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable) +{ + u32 vt_ctl = E1000_READ_REG(hw, E1000_VT_CTL); + + if (enable) + vt_ctl |= E1000_VT_CTL_VM_REPL_EN; + else + vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN; + + E1000_WRITE_REG(hw, E1000_VT_CTL, vt_ctl); +} + +/** + * e1000_read_phy_reg_82580 - Read 82580 MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the MDI control register in the PHY at offset and stores the + * information read to data. + **/ +static s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_read_phy_reg_82580"); + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + ret_val = e1000_read_phy_reg_mdic(hw, offset, data); + + hw->phy.ops.release(hw); + +out: + return ret_val; +} + +/** + * e1000_write_phy_reg_82580 - Write 82580 MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write to register at offset + * + * Writes data to MDI control register in the PHY at offset. + **/ +static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_write_phy_reg_82580"); + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + goto out; + + ret_val = e1000_write_phy_reg_mdic(hw, offset, data); + + hw->phy.ops.release(hw); + +out: + return ret_val; +} + +/** + * e1000_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits + * @hw: pointer to the HW structure + * + * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on + * the values found in the EEPROM. This addresses an issue in which these + * bits are not restored from EEPROM after reset. + **/ +static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u32 mdicnfg; + u16 nvm_data = 0; + + DEBUGFUNC("e1000_reset_mdicnfg_82580"); + + if (hw->mac.type != e1000_82580) + goto out; + if (!e1000_sgmii_active_82575(hw)) + goto out; + + ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + + NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, + &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + + mdicnfg = E1000_READ_REG(hw, E1000_MDICNFG); + if (nvm_data & NVM_WORD24_EXT_MDIO) + mdicnfg |= E1000_MDICNFG_EXT_MDIO; + if (nvm_data & NVM_WORD24_COM_MDIO) + mdicnfg |= E1000_MDICNFG_COM_MDIO; + E1000_WRITE_REG(hw, E1000_MDICNFG, mdicnfg); +out: + return ret_val; +} + +/** + * e1000_reset_hw_82580 - Reset hardware + * @hw: pointer to the HW structure + * + * This resets function or entire device (all ports, etc.) + * to a known state. + **/ +static s32 e1000_reset_hw_82580(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + /* BH SW mailbox bit in SW_FW_SYNC */ + u16 swmbsw_mask = E1000_SW_SYNCH_MB; + u32 ctrl; + bool global_device_reset = hw->dev_spec._82575.global_device_reset; + + DEBUGFUNC("e1000_reset_hw_82580"); + + hw->dev_spec._82575.global_device_reset = false; + + /* 82580 does not reliably do global_device_reset due to hw errata */ + if (hw->mac.type == e1000_82580) + global_device_reset = false; + + /* Get current control state. */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + + /* + * Prevent the PCI-E bus from sticking if there is no TLP connection + * on the last TLP read/write transaction when MAC is reset. + */ + ret_val = e1000_disable_pcie_master_generic(hw); + if (ret_val) + DEBUGOUT("PCI-E Master disable polling has failed.\n"); + + DEBUGOUT("Masking off all interrupts\n"); + E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); + E1000_WRITE_REG(hw, E1000_RCTL, 0); + E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP); + E1000_WRITE_FLUSH(hw); + + msec_delay(10); + + /* Determine whether or not a global dev reset is requested */ + if (global_device_reset && hw->mac.ops.acquire_swfw_sync(hw, + swmbsw_mask)) + global_device_reset = false; + + if (global_device_reset && !(E1000_READ_REG(hw, E1000_STATUS) & + E1000_STAT_DEV_RST_SET)) + ctrl |= E1000_CTRL_DEV_RST; + else + ctrl |= E1000_CTRL_RST; + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + E1000_WRITE_FLUSH(hw); + + /* Add delay to insure DEV_RST has time to complete */ + if (global_device_reset) + msec_delay(5); + + ret_val = e1000_get_auto_rd_done_generic(hw); + if (ret_val) { + /* + * When auto config read does not complete, do not + * return with an error. This can happen in situations + * where there is no eeprom and prevents getting link. + */ + DEBUGOUT("Auto Read Done did not complete\n"); + } + + /* clear global device reset status bit */ + E1000_WRITE_REG(hw, E1000_STATUS, E1000_STAT_DEV_RST_SET); + + /* Clear any pending interrupt events. */ + E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); + E1000_READ_REG(hw, E1000_ICR); + + ret_val = e1000_reset_mdicnfg_82580(hw); + if (ret_val) + DEBUGOUT("Could not reset MDICNFG based on EEPROM\n"); + + /* Install any alternate MAC address into RAR0 */ + ret_val = e1000_check_alt_mac_addr_generic(hw); + + /* Release semaphore */ + if (global_device_reset) + hw->mac.ops.release_swfw_sync(hw, swmbsw_mask); + + return ret_val; +} + +/** + * e1000_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual Rx PBA size + * @data: data received by reading RXPBS register + * + * The 82580 uses a table based approach for packet buffer allocation sizes. + * This function converts the retrieved value into the correct table value + * 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 + * 0x0 36 72 144 1 2 4 8 16 + * 0x8 35 70 140 rsv rsv rsv rsv rsv + */ +u16 e1000_rxpbs_adjust_82580(u32 data) +{ + u16 ret_val = 0; + + if (data < E1000_82580_RXPBS_TABLE_SIZE) + ret_val = e1000_82580_rxpbs_table[data]; + + return ret_val; +} + +/** + * e1000_validate_nvm_checksum_with_offset - Validate EEPROM + * checksum + * @hw: pointer to the HW structure + * @offset: offset in words of the checksum protected region + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + **/ +s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset) +{ + s32 ret_val = E1000_SUCCESS; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_validate_nvm_checksum_with_offset"); + + for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + checksum += nvm_data; + } + + if (checksum != (u16) NVM_SUM) { + DEBUGOUT("NVM Checksum Invalid\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_update_nvm_checksum_with_offset - Update EEPROM + * checksum + * @hw: pointer to the HW structure + * @offset: offset in words of the checksum protected region + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. + **/ +s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset) +{ + s32 ret_val; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_update_nvm_checksum_with_offset"); + + for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error while updating checksum.\n"); + goto out; + } + checksum += nvm_data; + } + checksum = (u16) NVM_SUM - checksum; + ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1, + &checksum); + if (ret_val) + DEBUGOUT("NVM Write Error while updating checksum.\n"); + +out: + return ret_val; +} + +/** + * e1000_validate_nvm_checksum_82580 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM section checksum by reading/adding each word of + * the EEPROM and then verifies that the sum of the EEPROM is + * equal to 0xBABA. + **/ +static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 eeprom_regions_count = 1; + u16 j, nvm_data; + u16 nvm_offset; + + DEBUGFUNC("e1000_validate_nvm_checksum_82580"); + + ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + + if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) { + /* if chekcsums compatibility bit is set validate checksums + * for all 4 ports. */ + eeprom_regions_count = 4; + } + + for (j = 0; j < eeprom_regions_count; j++) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); + ret_val = e1000_validate_nvm_checksum_with_offset(hw, + nvm_offset); + if (ret_val != E1000_SUCCESS) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_update_nvm_checksum_82580 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM section checksums for all 4 ports by reading/adding + * each word of the EEPROM up to the checksum. Then calculates the EEPROM + * checksum and writes the value to the EEPROM. + **/ +static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw) +{ + s32 ret_val; + u16 j, nvm_data; + u16 nvm_offset; + + DEBUGFUNC("e1000_update_nvm_checksum_82580"); + + ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error while updating checksum compatibility bit.\n"); + goto out; + } + + if (!(nvm_data & NVM_COMPATIBILITY_BIT_MASK)) { + /* set compatibility bit to validate checksums appropriately */ + nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK; + ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1, + &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Write Error while updating checksum compatibility bit.\n"); + goto out; + } + } + + for (j = 0; j < 4; j++) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); + ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset); + if (ret_val) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_validate_nvm_checksum_i350 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM section checksum by reading/adding each word of + * the EEPROM and then verifies that the sum of the EEPROM is + * equal to 0xBABA. + **/ +static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 j; + u16 nvm_offset; + + DEBUGFUNC("e1000_validate_nvm_checksum_i350"); + + for (j = 0; j < 4; j++) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); + ret_val = e1000_validate_nvm_checksum_with_offset(hw, + nvm_offset); + if (ret_val != E1000_SUCCESS) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_update_nvm_checksum_i350 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM section checksums for all 4 ports by reading/adding + * each word of the EEPROM up to the checksum. Then calculates the EEPROM + * checksum and writes the value to the EEPROM. + **/ +static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 j; + u16 nvm_offset; + + DEBUGFUNC("e1000_update_nvm_checksum_i350"); + + for (j = 0; j < 4; j++) { + nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); + ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset); + if (ret_val != E1000_SUCCESS) + goto out; + } + +out: + return ret_val; +} + +/** + * __e1000_access_emi_reg - Read/write EMI register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: pointer to value to read/write from/to the EMI address + * @read: boolean flag to indicate read or write + **/ +static s32 __e1000_access_emi_reg(struct e1000_hw *hw, u16 address, + u16 *data, bool read) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("__e1000_access_emi_reg"); + + ret_val = hw->phy.ops.write_reg(hw, E1000_EMIADD, address); + if (ret_val) + return ret_val; + + if (read) + ret_val = hw->phy.ops.read_reg(hw, E1000_EMIDATA, data); + else + ret_val = hw->phy.ops.write_reg(hw, E1000_EMIDATA, *data); + + return ret_val; +} + +/** + * e1000_read_emi_reg - Read Extended Management Interface register + * @hw: pointer to the HW structure + * @addr: EMI address to program + * @data: value to be read from the EMI address + **/ +s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data) +{ + DEBUGFUNC("e1000_read_emi_reg"); + + return __e1000_access_emi_reg(hw, addr, data, true); +} + +/** + * e1000_set_eee_i350 - Enable/disable EEE support + * @hw: pointer to the HW structure + * + * Enable/disable EEE based on setting in dev_spec structure. + * + **/ +s32 e1000_set_eee_i350(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u32 ipcnfg, eeer; + + DEBUGFUNC("e1000_set_eee_i350"); + + if ((hw->mac.type < e1000_i350) || + (hw->phy.media_type != e1000_media_type_copper)) + goto out; + ipcnfg = E1000_READ_REG(hw, E1000_IPCNFG); + eeer = E1000_READ_REG(hw, E1000_EEER); + + /* enable or disable per user setting */ + if (!(hw->dev_spec._82575.eee_disable)) { + u32 eee_su = E1000_READ_REG(hw, E1000_EEE_SU); + + ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); + eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | + E1000_EEER_LPI_FC); + + /* This bit should not be set in normal operation. */ + if (eee_su & E1000_EEE_SU_LPI_CLK_STP) + DEBUGOUT("LPI Clock Stop Bit should not be set!\n"); + } else { + ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); + eeer &= ~(E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | + E1000_EEER_LPI_FC); + } + E1000_WRITE_REG(hw, E1000_IPCNFG, ipcnfg); + E1000_WRITE_REG(hw, E1000_EEER, eeer); + E1000_READ_REG(hw, E1000_IPCNFG); + E1000_READ_REG(hw, E1000_EEER); +out: + + return ret_val; +} + +/** + * e1000_set_eee_i354 - Enable/disable EEE support + * @hw: pointer to the HW structure + * + * Enable/disable EEE legacy mode based on setting in dev_spec structure. + * + **/ +s32 e1000_set_eee_i354(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 phy_data; + + DEBUGFUNC("e1000_set_eee_i354"); + + if ((hw->phy.media_type != e1000_media_type_copper) || + ((phy->id != M88E1543_E_PHY_ID))) + goto out; + + if (!hw->dev_spec._82575.eee_disable) { + /* Switch to PHY page 18. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 18); + if (ret_val) + goto out; + + ret_val = phy->ops.read_reg(hw, E1000_M88E1543_EEE_CTRL_1, + &phy_data); + if (ret_val) + goto out; + + phy_data |= E1000_M88E1543_EEE_CTRL_1_MS; + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_EEE_CTRL_1, + phy_data); + if (ret_val) + goto out; + + /* Return the PHY to page 0. */ + ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); + if (ret_val) + goto out; + + /* Turn on EEE advertisement. */ + ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + phy_data |= E1000_EEE_ADV_100_SUPPORTED | + E1000_EEE_ADV_1000_SUPPORTED; + ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + phy_data); + } else { + /* Turn off EEE advertisement. */ + ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED | + E1000_EEE_ADV_1000_SUPPORTED); + ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, + E1000_EEE_ADV_DEV_I354, + phy_data); + } + +out: + return ret_val; +} + +/** + * e1000_get_eee_status_i354 - Get EEE status + * @hw: pointer to the HW structure + * @status: EEE status + * + * Get EEE status by guessing based on whether Tx or Rx LPI indications have + * been received. + **/ +s32 e1000_get_eee_status_i354(struct e1000_hw *hw, bool *status) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 phy_data; + + DEBUGFUNC("e1000_get_eee_status_i354"); + + /* Check if EEE is supported on this device. */ + if ((hw->phy.media_type != e1000_media_type_copper) || + ((phy->id != M88E1543_E_PHY_ID))) + goto out; + + ret_val = e1000_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354, + E1000_PCS_STATUS_DEV_I354, + &phy_data); + if (ret_val) + goto out; + + *status = phy_data & (E1000_PCS_STATUS_TX_LPI_RCVD | + E1000_PCS_STATUS_RX_LPI_RCVD) ? true : false; + +out: + return ret_val; +} + +/* Due to a hw errata, if the host tries to configure the VFTA register + * while performing queries from the BMC or DMA, then the VFTA in some + * cases won't be written. + */ + +/** + * e1000_clear_vfta_i350 - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * Clears the register array which contains the VLAN filter table by + * setting all the values to 0. + **/ +void e1000_clear_vfta_i350(struct e1000_hw *hw) +{ + u32 offset; + int i; + + DEBUGFUNC("e1000_clear_vfta_350"); + + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + for (i = 0; i < 10; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); + + E1000_WRITE_FLUSH(hw); + } +} + +/** + * e1000_write_vfta_i350 - Write value to VLAN filter table + * @hw: pointer to the HW structure + * @offset: register offset in VLAN filter table + * @value: register value written to VLAN filter table + * + * Writes value at the given offset in the register array which stores + * the VLAN filter table. + **/ +void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value) +{ + int i; + + DEBUGFUNC("e1000_write_vfta_350"); + + for (i = 0; i < 10; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); + + E1000_WRITE_FLUSH(hw); +} + + +/** + * e1000_set_i2c_bb - Enable I2C bit-bang + * @hw: pointer to the HW structure + * + * Enable I2C bit-bang interface + * + **/ +s32 e1000_set_i2c_bb(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u32 ctrl_ext, i2cparams; + + DEBUGFUNC("e1000_set_i2c_bb"); + + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext |= E1000_CTRL_I2C_ENA; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); + + i2cparams = E1000_READ_REG(hw, E1000_I2CPARAMS); + i2cparams |= E1000_I2CBB_EN; + i2cparams |= E1000_I2C_DATA_OE_N; + i2cparams |= E1000_I2C_CLK_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cparams); + E1000_WRITE_FLUSH(hw); + + return ret_val; +} + +/** + * e1000_read_i2c_byte_generic - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: device address + * @data: value read + * + * Performs byte read operation over I2C interface at + * a specified device address. + **/ +s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + s32 status = E1000_SUCCESS; + u32 max_retry = 10; + u32 retry = 1; + u16 swfw_mask = 0; + + bool nack = true; + + DEBUGFUNC("e1000_read_i2c_byte_generic"); + + swfw_mask = E1000_SWFW_PHY0_SM; + + do { + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) + != E1000_SUCCESS) { + status = E1000_ERR_SWFW_SYNC; + goto read_byte_out; + } + + e1000_i2c_start(hw); + + /* Device Address and write indication */ + status = e1000_clock_out_i2c_byte(hw, dev_addr); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_out_i2c_byte(hw, byte_offset); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + e1000_i2c_start(hw); + + /* Device Address and read indication */ + status = e1000_clock_out_i2c_byte(hw, (dev_addr | 0x1)); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_in_i2c_byte(hw, data); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_out_i2c_bit(hw, nack); + if (status != E1000_SUCCESS) + goto fail; + + e1000_i2c_stop(hw); + break; + +fail: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msec_delay(100); + e1000_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + DEBUGOUT("I2C byte read error - Retrying.\n"); + else + DEBUGOUT("I2C byte read error.\n"); + + } while (retry < max_retry); + + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + +read_byte_out: + + return status; +} + +/** + * e1000_write_i2c_byte_generic - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: value to write + * + * Performs byte write operation over I2C interface at + * a specified device address. + **/ +s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + s32 status = E1000_SUCCESS; + u32 max_retry = 1; + u32 retry = 0; + u16 swfw_mask = 0; + + DEBUGFUNC("e1000_write_i2c_byte_generic"); + + swfw_mask = E1000_SWFW_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) { + status = E1000_ERR_SWFW_SYNC; + goto write_byte_out; + } + + do { + e1000_i2c_start(hw); + + status = e1000_clock_out_i2c_byte(hw, dev_addr); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_out_i2c_byte(hw, byte_offset); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_clock_out_i2c_byte(hw, data); + if (status != E1000_SUCCESS) + goto fail; + + status = e1000_get_i2c_ack(hw); + if (status != E1000_SUCCESS) + goto fail; + + e1000_i2c_stop(hw); + break; + +fail: + e1000_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + DEBUGOUT("I2C byte write error - Retrying.\n"); + else + DEBUGOUT("I2C byte write error.\n"); + } while (retry < max_retry); + + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + +write_byte_out: + + return status; +} + +/** + * e1000_i2c_start - Sets I2C start condition + * @hw: pointer to hardware structure + * + * Sets I2C start condition (High -> Low on SDA while SCL is High) + **/ +static void e1000_i2c_start(struct e1000_hw *hw) +{ + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + DEBUGFUNC("e1000_i2c_start"); + + /* Start condition must begin with data and clock high */ + e1000_set_i2c_data(hw, &i2cctl, 1); + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for start condition (4.7us) */ + usec_delay(E1000_I2C_T_SU_STA); + + e1000_set_i2c_data(hw, &i2cctl, 0); + + /* Hold time for start condition (4us) */ + usec_delay(E1000_I2C_T_HD_STA); + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + usec_delay(E1000_I2C_T_LOW); + +} + +/** + * e1000_i2c_stop - Sets I2C stop condition + * @hw: pointer to hardware structure + * + * Sets I2C stop condition (Low -> High on SDA while SCL is High) + **/ +static void e1000_i2c_stop(struct e1000_hw *hw) +{ + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + DEBUGFUNC("e1000_i2c_stop"); + + /* Stop condition must begin with data low and clock high */ + e1000_set_i2c_data(hw, &i2cctl, 0); + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for stop condition (4us) */ + usec_delay(E1000_I2C_T_SU_STO); + + e1000_set_i2c_data(hw, &i2cctl, 1); + + /* bus free time between stop and start (4.7us)*/ + usec_delay(E1000_I2C_T_BUF); +} + +/** + * e1000_clock_in_i2c_byte - Clocks in one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte to clock in + * + * Clocks in one byte data via I2C data/clock + **/ +static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data) +{ + s32 i; + bool bit = 0; + + DEBUGFUNC("e1000_clock_in_i2c_byte"); + + *data = 0; + for (i = 7; i >= 0; i--) { + e1000_clock_in_i2c_bit(hw, &bit); + *data |= bit << i; + } + + return E1000_SUCCESS; +} + +/** + * e1000_clock_out_i2c_byte - Clocks out one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte clocked out + * + * Clocks out one byte data via I2C data/clock + **/ +static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data) +{ + s32 status = E1000_SUCCESS; + s32 i; + u32 i2cctl; + bool bit = 0; + + DEBUGFUNC("e1000_clock_out_i2c_byte"); + + for (i = 7; i >= 0; i--) { + bit = (data >> i) & 0x1; + status = e1000_clock_out_i2c_bit(hw, bit); + + if (status != E1000_SUCCESS) + break; + } + + /* Release SDA line (set high) */ + i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + i2cctl |= E1000_I2C_DATA_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); + E1000_WRITE_FLUSH(hw); + + return status; +} + +/** + * e1000_get_i2c_ack - Polls for I2C ACK + * @hw: pointer to hardware structure + * + * Clocks in/out one bit via I2C data/clock + **/ +static s32 e1000_get_i2c_ack(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u32 i = 0; + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + u32 timeout = 10; + bool ack = true; + + DEBUGFUNC("e1000_get_i2c_ack"); + + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + usec_delay(E1000_I2C_T_HIGH); + + /* Wait until SCL returns high */ + for (i = 0; i < timeout; i++) { + usec_delay(1); + i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + if (i2cctl & E1000_I2C_CLK_IN) + break; + } + if (!(i2cctl & E1000_I2C_CLK_IN)) + return E1000_ERR_I2C; + + ack = e1000_get_i2c_data(&i2cctl); + if (ack) { + DEBUGOUT("I2C ack was not received.\n"); + status = E1000_ERR_I2C; + } + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + usec_delay(E1000_I2C_T_LOW); + + return status; +} + +/** + * e1000_clock_in_i2c_bit - Clocks in one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: read data value + * + * Clocks in one bit via I2C data/clock + **/ +static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data) +{ + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + DEBUGFUNC("e1000_clock_in_i2c_bit"); + + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + usec_delay(E1000_I2C_T_HIGH); + + i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + *data = e1000_get_i2c_data(&i2cctl); + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + usec_delay(E1000_I2C_T_LOW); + + return E1000_SUCCESS; +} + +/** + * e1000_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: data value to write + * + * Clocks out one bit via I2C data/clock + **/ +static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data) +{ + s32 status; + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + DEBUGFUNC("e1000_clock_out_i2c_bit"); + + status = e1000_set_i2c_data(hw, &i2cctl, data); + if (status == E1000_SUCCESS) { + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + usec_delay(E1000_I2C_T_HIGH); + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us. + * This also takes care of the data hold time. + */ + usec_delay(E1000_I2C_T_LOW); + } else { + status = E1000_ERR_I2C; + DEBUGOUT1("I2C data was not set to %X\n", data); + } + + return status; +} +/** + * e1000_raise_i2c_clk - Raises the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Raises the I2C clock line '0'->'1' + **/ +static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl) +{ + DEBUGFUNC("e1000_raise_i2c_clk"); + + *i2cctl |= E1000_I2C_CLK_OUT; + *i2cctl &= ~E1000_I2C_CLK_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); + E1000_WRITE_FLUSH(hw); + + /* SCL rise time (1000ns) */ + usec_delay(E1000_I2C_T_RISE); +} + +/** + * e1000_lower_i2c_clk - Lowers the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Lowers the I2C clock line '1'->'0' + **/ +static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl) +{ + + DEBUGFUNC("e1000_lower_i2c_clk"); + + *i2cctl &= ~E1000_I2C_CLK_OUT; + *i2cctl &= ~E1000_I2C_CLK_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); + E1000_WRITE_FLUSH(hw); + + /* SCL fall time (300ns) */ + usec_delay(E1000_I2C_T_FALL); +} + +/** + * e1000_set_i2c_data - Sets the I2C data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * @data: I2C data value (0 or 1) to set + * + * Sets the I2C data bit + **/ +static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data) +{ + s32 status = E1000_SUCCESS; + + DEBUGFUNC("e1000_set_i2c_data"); + + if (data) + *i2cctl |= E1000_I2C_DATA_OUT; + else + *i2cctl &= ~E1000_I2C_DATA_OUT; + + *i2cctl &= ~E1000_I2C_DATA_OE_N; + *i2cctl |= E1000_I2C_CLK_OE_N; + E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); + E1000_WRITE_FLUSH(hw); + + /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ + usec_delay(E1000_I2C_T_RISE + E1000_I2C_T_FALL + E1000_I2C_T_SU_DATA); + + *i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + if (data != e1000_get_i2c_data(i2cctl)) { + status = E1000_ERR_I2C; + DEBUGOUT1("Error - I2C data was not set to %X.\n", data); + } + + return status; +} + +/** + * e1000_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Returns the I2C data bit value + **/ +static bool e1000_get_i2c_data(u32 *i2cctl) +{ + bool data; + + DEBUGFUNC("e1000_get_i2c_data"); + + if (*i2cctl & E1000_I2C_DATA_IN) + data = 1; + else + data = 0; + + return data; +} + +/** + * e1000_i2c_bus_clear - Clears the I2C bus + * @hw: pointer to hardware structure + * + * Clears the I2C bus by sending nine clock pulses. + * Used when data line is stuck low. + **/ +void e1000_i2c_bus_clear(struct e1000_hw *hw) +{ + u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + u32 i; + + DEBUGFUNC("e1000_i2c_bus_clear"); + + e1000_i2c_start(hw); + + e1000_set_i2c_data(hw, &i2cctl, 1); + + for (i = 0; i < 9; i++) { + e1000_raise_i2c_clk(hw, &i2cctl); + + /* Min high period of clock is 4us */ + usec_delay(E1000_I2C_T_HIGH); + + e1000_lower_i2c_clk(hw, &i2cctl); + + /* Min low period of clock is 4.7us*/ + usec_delay(E1000_I2C_T_LOW); + } + + e1000_i2c_start(hw); + + /* Put the i2c bus back to default state */ + e1000_i2c_stop(hw); +} + +static const u8 e1000_emc_temp_data[4] = { + E1000_EMC_INTERNAL_DATA, + E1000_EMC_DIODE1_DATA, + E1000_EMC_DIODE2_DATA, + E1000_EMC_DIODE3_DATA +}; +static const u8 e1000_emc_therm_limit[4] = { + E1000_EMC_INTERNAL_THERM_LIMIT, + E1000_EMC_DIODE1_THERM_LIMIT, + E1000_EMC_DIODE2_THERM_LIMIT, + E1000_EMC_DIODE3_THERM_LIMIT +}; + +/** + * e1000_get_thermal_sensor_data_generic - Gathers thermal sensor data + * @hw: pointer to hardware structure + * + * Updates the temperatures in mac.thermal_sensor_data + **/ +s32 e1000_get_thermal_sensor_data_generic(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + DEBUGFUNC("e1000_get_thermal_sensor_data_generic"); + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + data->sensor[0].temp = (E1000_READ_REG(hw, E1000_THMJT) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return status; + + e1000_read_nvm(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + if (num_sensors > E1000_MAX_SENSORS) + num_sensors = E1000_MAX_SENSORS; + + for (i = 1; i < num_sensors; i++) { + e1000_read_nvm(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + + if (sensor_location != 0) + hw->phy.ops.read_i2c_byte(hw, + e1000_emc_temp_data[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + &data->sensor[i].temp); + } + return status; +} + +/** + * e1000_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Sets the thermal sensor thresholds according to the NVM map + * and save off the threshold and location values into mac.thermal_sensor_data + **/ +s32 e1000_init_thermal_sensor_thresh_generic(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 low_thresh_delta; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 therm_limit; + u8 i; + struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + DEBUGFUNC("e1000_init_thermal_sensor_thresh_generic"); + + if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) + return E1000_NOT_IMPLEMENTED; + + memset(data, 0, sizeof(struct e1000_thermal_sensor_data)); + + data->sensor[0].location = 0x1; + data->sensor[0].caution_thresh = + (E1000_READ_REG(hw, E1000_THHIGHTC) & 0xFF); + data->sensor[0].max_op_thresh = + (E1000_READ_REG(hw, E1000_THLOWTC) & 0xFF); + + /* Return the internal sensor only if ETS is unsupported */ + e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return status; + + e1000_read_nvm(hw, ets_offset, 1, &ets_cfg); + if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) + != NVM_ETS_TYPE_EMC) + return E1000_NOT_IMPLEMENTED; + + low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >> + NVM_ETS_LTHRES_DELTA_SHIFT); + num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); + + for (i = 1; i <= num_sensors; i++) { + e1000_read_nvm(hw, (ets_offset + i), 1, &ets_sensor); + sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> + NVM_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> + NVM_ETS_DATA_LOC_SHIFT); + therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK; + + hw->phy.ops.write_i2c_byte(hw, + e1000_emc_therm_limit[sensor_index], + E1000_I2C_THERMAL_SENSOR_ADDR, + therm_limit); + + if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) { + data->sensor[i].location = sensor_location; + data->sensor[i].caution_thresh = therm_limit; + data->sensor[i].max_op_thresh = therm_limit - + low_thresh_delta; + } + } + return status; +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_82575.h b/kernel/linux/kni/ethtool/igb/e1000_82575.h new file mode 100644 index 00000000..2e0dbb2f --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_82575.h @@ -0,0 +1,494 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_82575_H_ +#define _E1000_82575_H_ + +#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_DEF1_DEF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_OFF1_ON2)) +/* + * Receive Address Register Count + * Number of high/low register pairs in the RAR. The RAR (Receive Address + * Registers) holds the directed and multicast addresses that we monitor. + * These entries are also used for MAC-based filtering. + */ +/* + * For 82576, there are an additional set of RARs that begin at an offset + * separate from the first set of RARs. + */ +#define E1000_RAR_ENTRIES_82575 16 +#define E1000_RAR_ENTRIES_82576 24 +#define E1000_RAR_ENTRIES_82580 24 +#define E1000_RAR_ENTRIES_I350 32 +#define E1000_SW_SYNCH_MB 0x00000100 +#define E1000_STAT_DEV_RST_SET 0x00100000 +#define E1000_CTRL_DEV_RST 0x20000000 + +struct e1000_adv_data_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + union { + u32 data; + struct { + u32 datalen:16; /* Data buffer length */ + u32 rsvd:4; + u32 dtyp:4; /* Descriptor type */ + u32 dcmd:8; /* Descriptor command */ + } config; + } lower; + union { + u32 data; + struct { + u32 status:4; /* Descriptor status */ + u32 idx:4; + u32 popts:6; /* Packet Options */ + u32 paylen:18; /* Payload length */ + } options; + } upper; +}; + +#define E1000_TXD_DTYP_ADV_C 0x2 /* Advanced Context Descriptor */ +#define E1000_TXD_DTYP_ADV_D 0x3 /* Advanced Data Descriptor */ +#define E1000_ADV_TXD_CMD_DEXT 0x20 /* Descriptor extension (0 = legacy) */ +#define E1000_ADV_TUCMD_IPV4 0x2 /* IP Packet Type: 1=IPv4 */ +#define E1000_ADV_TUCMD_IPV6 0x0 /* IP Packet Type: 0=IPv6 */ +#define E1000_ADV_TUCMD_L4T_UDP 0x0 /* L4 Packet TYPE of UDP */ +#define E1000_ADV_TUCMD_L4T_TCP 0x4 /* L4 Packet TYPE of TCP */ +#define E1000_ADV_TUCMD_MKRREQ 0x10 /* Indicates markers are required */ +#define E1000_ADV_DCMD_EOP 0x1 /* End of Packet */ +#define E1000_ADV_DCMD_IFCS 0x2 /* Insert FCS (Ethernet CRC) */ +#define E1000_ADV_DCMD_RS 0x8 /* Report Status */ +#define E1000_ADV_DCMD_VLE 0x40 /* Add VLAN tag */ +#define E1000_ADV_DCMD_TSE 0x80 /* TCP Seg enable */ +/* Extended Device Control */ +#define E1000_CTRL_EXT_NSICR 0x00000001 /* Disable Intr Clear all on read */ + +struct e1000_adv_context_desc { + union { + u32 ip_config; + struct { + u32 iplen:9; + u32 maclen:7; + u32 vlan_tag:16; + } fields; + } ip_setup; + u32 seq_num; + union { + u64 l4_config; + struct { + u32 mkrloc:9; + u32 tucmd:11; + u32 dtyp:4; + u32 adv:8; + u32 rsvd:4; + u32 idx:4; + u32 l4len:8; + u32 mss:16; + } fields; + } l4_setup; +}; + +/* SRRCTL bit definitions */ +#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ +#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00 +#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */ +#define E1000_SRRCTL_DESCTYPE_LEGACY 0x00000000 +#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 +#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION 0x06000000 +#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000 +#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000 +#define E1000_SRRCTL_TIMESTAMP 0x40000000 +#define E1000_SRRCTL_DROP_EN 0x80000000 + +#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F +#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00 + +#define E1000_TX_HEAD_WB_ENABLE 0x1 +#define E1000_TX_SEQNUM_WB_ENABLE 0x2 + +#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002 +#define E1000_MRQC_ENABLE_VMDQ 0x00000003 +#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005 +#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000 +#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000 +#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000 +#define E1000_MRQC_ENABLE_RSS_8Q 0x00000002 + +#define E1000_VMRCTL_MIRROR_PORT_SHIFT 8 +#define E1000_VMRCTL_MIRROR_DSTPORT_MASK (7 << \ + E1000_VMRCTL_MIRROR_PORT_SHIFT) +#define E1000_VMRCTL_POOL_MIRROR_ENABLE (1 << 0) +#define E1000_VMRCTL_UPLINK_MIRROR_ENABLE (1 << 1) +#define E1000_VMRCTL_DOWNLINK_MIRROR_ENABLE (1 << 2) + +#define E1000_EICR_TX_QUEUE ( \ + E1000_EICR_TX_QUEUE0 | \ + E1000_EICR_TX_QUEUE1 | \ + E1000_EICR_TX_QUEUE2 | \ + E1000_EICR_TX_QUEUE3) + +#define E1000_EICR_RX_QUEUE ( \ + E1000_EICR_RX_QUEUE0 | \ + E1000_EICR_RX_QUEUE1 | \ + E1000_EICR_RX_QUEUE2 | \ + E1000_EICR_RX_QUEUE3) + +#define E1000_EIMS_RX_QUEUE E1000_EICR_RX_QUEUE +#define E1000_EIMS_TX_QUEUE E1000_EICR_TX_QUEUE + +#define EIMS_ENABLE_MASK ( \ + E1000_EIMS_RX_QUEUE | \ + E1000_EIMS_TX_QUEUE | \ + E1000_EIMS_TCP_TIMER | \ + E1000_EIMS_OTHER) + +/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */ +#define E1000_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */ +#define E1000_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */ +#define E1000_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */ +#define E1000_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */ +#define E1000_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */ +#define E1000_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */ +#define E1000_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */ +#define E1000_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */ +#define E1000_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */ +#define E1000_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of ctrl bits */ + +/* Receive Descriptor - Advanced */ +union e1000_adv_rx_desc { + struct { + __le64 pkt_addr; /* Packet buffer address */ + __le64 hdr_addr; /* Header buffer address */ + } read; + struct { + struct { + union { + __le32 data; + struct { + __le16 pkt_info; /*RSS type, Pkt type*/ + /* Split Header, header buffer len */ + __le16 hdr_info; + } hs_rss; + } lo_dword; + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length; /* Packet length */ + __le16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define E1000_RXDADV_RSSTYPE_MASK 0x0000000F +#define E1000_RXDADV_RSSTYPE_SHIFT 12 +#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0 +#define E1000_RXDADV_HDRBUFLEN_SHIFT 5 +#define E1000_RXDADV_SPLITHEADER_EN 0x00001000 +#define E1000_RXDADV_SPH 0x8000 +#define E1000_RXDADV_STAT_TS 0x10000 /* Pkt was time stamped */ +#define E1000_RXDADV_STAT_TSIP 0x08000 /* timestamp in packet */ +#define E1000_RXDADV_ERR_HBO 0x00800000 + +/* RSS Hash results */ +#define E1000_RXDADV_RSSTYPE_NONE 0x00000000 +#define E1000_RXDADV_RSSTYPE_IPV4_TCP 0x00000001 +#define E1000_RXDADV_RSSTYPE_IPV4 0x00000002 +#define E1000_RXDADV_RSSTYPE_IPV6_TCP 0x00000003 +#define E1000_RXDADV_RSSTYPE_IPV6_EX 0x00000004 +#define E1000_RXDADV_RSSTYPE_IPV6 0x00000005 +#define E1000_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006 +#define E1000_RXDADV_RSSTYPE_IPV4_UDP 0x00000007 +#define E1000_RXDADV_RSSTYPE_IPV6_UDP 0x00000008 +#define E1000_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009 + +/* RSS Packet Types as indicated in the receive descriptor */ +#define E1000_RXDADV_PKTTYPE_NONE 0x00000000 +#define E1000_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPV4 hdr present */ +#define E1000_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPV4 hdr + extensions */ +#define E1000_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPV6 hdr present */ +#define E1000_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPV6 hdr + extensions */ +#define E1000_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */ +#define E1000_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */ +#define E1000_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */ +#define E1000_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */ + +#define E1000_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */ +#define E1000_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */ +#define E1000_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */ +#define E1000_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */ +#define E1000_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */ +#define E1000_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */ + +/* LinkSec results */ +/* Security Processing bit Indication */ +#define E1000_RXDADV_LNKSEC_STATUS_SECP 0x00020000 +#define E1000_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000 +#define E1000_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000 +#define E1000_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000 +#define E1000_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000 + +#define E1000_RXDADV_IPSEC_STATUS_SECP 0x00020000 +#define E1000_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000 +#define E1000_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000 +#define E1000_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000 +#define E1000_RXDADV_IPSEC_ERROR_AUTHENTICATION_FAILED 0x18000000 + +/* Transmit Descriptor - Advanced */ +union e1000_adv_tx_desc { + struct { + __le64 buffer_addr; /* Address of descriptor's data buf */ + __le32 cmd_type_len; + __le32 olinfo_status; + } read; + struct { + __le64 rsvd; /* Reserved */ + __le32 nxtseq_seed; + __le32 status; + } wb; +}; + +/* Adv Transmit Descriptor Config Masks */ +#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */ +#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ +#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */ +#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */ +#define E1000_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */ +#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */ +#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */ +#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ +#define E1000_ADVTXD_MAC_LINKSEC 0x00040000 /* Apply LinkSec on pkt */ +#define E1000_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 Timestamp pkt */ +#define E1000_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED prsnt in WB */ +#define E1000_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */ +#define E1000_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */ +#define E1000_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */ +#define E1000_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */ +/* 1st & Last TSO-full iSCSI PDU*/ +#define E1000_ADVTXD_POPTS_ISCO_FULL 0x00001800 +#define E1000_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */ +#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ + +/* Context descriptors */ +struct e1000_adv_tx_context_desc { + __le32 vlan_macip_lens; + __le32 seqnum_seed; + __le32 type_tucmd_mlhl; + __le32 mss_l4len_idx; +}; + +#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ +#define E1000_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */ +#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ +#define E1000_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */ +#define E1000_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */ +#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ +#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */ +#define E1000_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */ +/* IPSec Encrypt Enable for ESP */ +#define E1000_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000 +/* Req requires Markers and CRC */ +#define E1000_ADVTXD_TUCMD_MKRREQ 0x00002000 +#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ +#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ +/* Adv ctxt IPSec SA IDX mask */ +#define E1000_ADVTXD_IPSEC_SA_INDEX_MASK 0x000000FF +/* Adv ctxt IPSec ESP len mask */ +#define E1000_ADVTXD_IPSEC_ESP_LEN_MASK 0x000000FF + +/* Additional Transmit Descriptor Control definitions */ +#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Tx Queue */ +#define E1000_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. wbk flushing */ +/* Tx Queue Arbitration Priority 0=low, 1=high */ +#define E1000_TXDCTL_PRIORITY 0x08000000 + +/* Additional Receive Descriptor Control definitions */ +#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Rx Queue */ +#define E1000_RXDCTL_SWFLSH 0x04000000 /* Rx Desc. wbk flushing */ + +/* Direct Cache Access (DCA) definitions */ +#define E1000_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */ +#define E1000_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */ + +#define E1000_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */ +#define E1000_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */ + +#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */ +#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ +#define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header ena */ +#define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload ena */ +#define E1000_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx Desc Relax Order */ + +#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ +#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ +#define E1000_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */ +#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ +#define E1000_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */ + +#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */ +#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */ +#define E1000_DCA_TXCTRL_CPUID_SHIFT_82576 24 /* Tx CPUID */ +#define E1000_DCA_RXCTRL_CPUID_SHIFT_82576 24 /* Rx CPUID */ + +/* Additional interrupt register bit definitions */ +#define E1000_ICR_LSECPNS 0x00000020 /* PN threshold - server */ +#define E1000_IMS_LSECPNS E1000_ICR_LSECPNS /* PN threshold - server */ +#define E1000_ICS_LSECPNS E1000_ICR_LSECPNS /* PN threshold - server */ + +/* ETQF register bit definitions */ +#define E1000_ETQF_FILTER_ENABLE (1 << 26) +#define E1000_ETQF_IMM_INT (1 << 29) +#define E1000_ETQF_1588 (1 << 30) +#define E1000_ETQF_QUEUE_ENABLE (1 << 31) +/* + * ETQF filter list: one static filter per filter consumer. This is + * to avoid filter collisions later. Add new filters + * here!! + * + * Current filters: + * EAPOL 802.1x (0x888e): Filter 0 + */ +#define E1000_ETQF_FILTER_EAPOL 0 + +#define E1000_FTQF_VF_BP 0x00008000 +#define E1000_FTQF_1588_TIME_STAMP 0x08000000 +#define E1000_FTQF_MASK 0xF0000000 +#define E1000_FTQF_MASK_PROTO_BP 0x10000000 +#define E1000_FTQF_MASK_SOURCE_ADDR_BP 0x20000000 +#define E1000_FTQF_MASK_DEST_ADDR_BP 0x40000000 +#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000 + +#define E1000_NVM_APME_82575 0x0400 +#define MAX_NUM_VFS 7 + +#define E1000_DTXSWC_MAC_SPOOF_MASK 0x000000FF /* Per VF MAC spoof cntrl */ +#define E1000_DTXSWC_VLAN_SPOOF_MASK 0x0000FF00 /* Per VF VLAN spoof cntrl */ +#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */ +#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8 +#define E1000_DTXSWC_LLE_SHIFT 16 +#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */ + +/* Easy defines for setting default pool, would normally be left a zero */ +#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7 +#define E1000_VT_CTL_DEFAULT_POOL_MASK (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT) + +/* Other useful VMD_CTL register defines */ +#define E1000_VT_CTL_IGNORE_MAC (1 << 28) +#define E1000_VT_CTL_DISABLE_DEF_POOL (1 << 29) +#define E1000_VT_CTL_VM_REPL_EN (1 << 30) + +/* Per VM Offload register setup */ +#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */ +#define E1000_VMOLR_LPE 0x00010000 /* Accept Long packet */ +#define E1000_VMOLR_RSSE 0x00020000 /* Enable RSS */ +#define E1000_VMOLR_AUPE 0x01000000 /* Accept untagged packets */ +#define E1000_VMOLR_ROMPE 0x02000000 /* Accept overflow multicast */ +#define E1000_VMOLR_ROPE 0x04000000 /* Accept overflow unicast */ +#define E1000_VMOLR_BAM 0x08000000 /* Accept Broadcast packets */ +#define E1000_VMOLR_MPME 0x10000000 /* Multicast promiscuous mode */ +#define E1000_VMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */ +#define E1000_VMOLR_STRCRC 0x80000000 /* CRC stripping enable */ + +#define E1000_VMOLR_VPE 0x00800000 /* VLAN promiscuous enable */ +#define E1000_VMOLR_UPE 0x20000000 /* Unicast promisuous enable */ +#define E1000_DVMOLR_HIDVLAN 0x20000000 /* Vlan hiding enable */ +#define E1000_DVMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */ +#define E1000_DVMOLR_STRCRC 0x80000000 /* CRC stripping enable */ + +#define E1000_PBRWAC_WALPB 0x00000007 /* Wrap around event on LAN Rx PB */ +#define E1000_PBRWAC_PBE 0x00000008 /* Rx packet buffer empty */ + +#define E1000_VLVF_ARRAY_SIZE 32 +#define E1000_VLVF_VLANID_MASK 0x00000FFF +#define E1000_VLVF_POOLSEL_SHIFT 12 +#define E1000_VLVF_POOLSEL_MASK (0xFF << E1000_VLVF_POOLSEL_SHIFT) +#define E1000_VLVF_LVLAN 0x00100000 +#define E1000_VLVF_VLANID_ENABLE 0x80000000 + +#define E1000_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */ +#define E1000_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */ + +#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */ + +#define E1000_IOVCTL 0x05BBC +#define E1000_IOVCTL_REUSE_VFQ 0x00000001 + +#define E1000_RPLOLR_STRVLAN 0x40000000 +#define E1000_RPLOLR_STRCRC 0x80000000 + +#define E1000_TCTL_EXT_COLD 0x000FFC00 +#define E1000_TCTL_EXT_COLD_SHIFT 10 + +#define E1000_DTXCTL_8023LL 0x0004 +#define E1000_DTXCTL_VLAN_ADDED 0x0008 +#define E1000_DTXCTL_OOS_ENABLE 0x0010 +#define E1000_DTXCTL_MDP_EN 0x0020 +#define E1000_DTXCTL_SPOOF_INT 0x0040 + +#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT (1 << 14) + +#define ALL_QUEUES 0xFFFF + +/* Rx packet buffer size defines */ +#define E1000_RXPBS_SIZE_MASK_82576 0x0000007F +void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable); +void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf); +void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable); +s32 e1000_init_nvm_params_82575(struct e1000_hw *hw); + +u16 e1000_rxpbs_adjust_82580(u32 data); +s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data); +s32 e1000_set_eee_i350(struct e1000_hw *); +s32 e1000_set_eee_i354(struct e1000_hw *); +s32 e1000_get_eee_status_i354(struct e1000_hw *, bool *); +#define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8 +#define E1000_EMC_INTERNAL_DATA 0x00 +#define E1000_EMC_INTERNAL_THERM_LIMIT 0x20 +#define E1000_EMC_DIODE1_DATA 0x01 +#define E1000_EMC_DIODE1_THERM_LIMIT 0x19 +#define E1000_EMC_DIODE2_DATA 0x23 +#define E1000_EMC_DIODE2_THERM_LIMIT 0x1A +#define E1000_EMC_DIODE3_DATA 0x2A +#define E1000_EMC_DIODE3_THERM_LIMIT 0x30 + +s32 e1000_get_thermal_sensor_data_generic(struct e1000_hw *hw); +s32 e1000_init_thermal_sensor_thresh_generic(struct e1000_hw *hw); + +/* I2C SDA and SCL timing parameters for standard mode */ +#define E1000_I2C_T_HD_STA 4 +#define E1000_I2C_T_LOW 5 +#define E1000_I2C_T_HIGH 4 +#define E1000_I2C_T_SU_STA 5 +#define E1000_I2C_T_HD_DATA 5 +#define E1000_I2C_T_SU_DATA 1 +#define E1000_I2C_T_RISE 1 +#define E1000_I2C_T_FALL 1 +#define E1000_I2C_T_SU_STO 4 +#define E1000_I2C_T_BUF 5 + +s32 e1000_set_i2c_bb(struct e1000_hw *hw); +s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); +void e1000_i2c_bus_clear(struct e1000_hw *hw); +#endif /* _E1000_82575_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_api.c b/kernel/linux/kni/ethtool/igb/e1000_api.c new file mode 100644 index 00000000..3e54e50e --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_api.c @@ -0,0 +1,1144 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_api.h" + +/** + * e1000_init_mac_params - Initialize MAC function pointers + * @hw: pointer to the HW structure + * + * This function initializes the function pointers for the MAC + * set of functions. Called by drivers or by e1000_setup_init_funcs. + **/ +s32 e1000_init_mac_params(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + if (hw->mac.ops.init_params) { + ret_val = hw->mac.ops.init_params(hw); + if (ret_val) { + DEBUGOUT("MAC Initialization Error\n"); + goto out; + } + } else { + DEBUGOUT("mac.init_mac_params was NULL\n"); + ret_val = -E1000_ERR_CONFIG; + } + +out: + return ret_val; +} + +/** + * e1000_init_nvm_params - Initialize NVM function pointers + * @hw: pointer to the HW structure + * + * This function initializes the function pointers for the NVM + * set of functions. Called by drivers or by e1000_setup_init_funcs. + **/ +s32 e1000_init_nvm_params(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + if (hw->nvm.ops.init_params) { + ret_val = hw->nvm.ops.init_params(hw); + if (ret_val) { + DEBUGOUT("NVM Initialization Error\n"); + goto out; + } + } else { + DEBUGOUT("nvm.init_nvm_params was NULL\n"); + ret_val = -E1000_ERR_CONFIG; + } + +out: + return ret_val; +} + +/** + * e1000_init_phy_params - Initialize PHY function pointers + * @hw: pointer to the HW structure + * + * This function initializes the function pointers for the PHY + * set of functions. Called by drivers or by e1000_setup_init_funcs. + **/ +s32 e1000_init_phy_params(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + if (hw->phy.ops.init_params) { + ret_val = hw->phy.ops.init_params(hw); + if (ret_val) { + DEBUGOUT("PHY Initialization Error\n"); + goto out; + } + } else { + DEBUGOUT("phy.init_phy_params was NULL\n"); + ret_val = -E1000_ERR_CONFIG; + } + +out: + return ret_val; +} + +/** + * e1000_init_mbx_params - Initialize mailbox function pointers + * @hw: pointer to the HW structure + * + * This function initializes the function pointers for the PHY + * set of functions. Called by drivers or by e1000_setup_init_funcs. + **/ +s32 e1000_init_mbx_params(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + + if (hw->mbx.ops.init_params) { + ret_val = hw->mbx.ops.init_params(hw); + if (ret_val) { + DEBUGOUT("Mailbox Initialization Error\n"); + goto out; + } + } else { + DEBUGOUT("mbx.init_mbx_params was NULL\n"); + ret_val = -E1000_ERR_CONFIG; + } + +out: + return ret_val; +} + +/** + * e1000_set_mac_type - Sets MAC type + * @hw: pointer to the HW structure + * + * This function sets the mac type of the adapter based on the + * device ID stored in the hw structure. + * MUST BE FIRST FUNCTION CALLED (explicitly or through + * e1000_setup_init_funcs()). + **/ +s32 e1000_set_mac_type(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_set_mac_type"); + + switch (hw->device_id) { + case E1000_DEV_ID_82575EB_COPPER: + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82575GB_QUAD_COPPER: + mac->type = e1000_82575; + break; + case E1000_DEV_ID_82576: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: + case E1000_DEV_ID_82576_QUAD_COPPER: + case E1000_DEV_ID_82576_QUAD_COPPER_ET2: + case E1000_DEV_ID_82576_NS: + case E1000_DEV_ID_82576_NS_SERDES: + case E1000_DEV_ID_82576_SERDES_QUAD: + mac->type = e1000_82576; + break; + case E1000_DEV_ID_82580_COPPER: + case E1000_DEV_ID_82580_FIBER: + case E1000_DEV_ID_82580_SERDES: + case E1000_DEV_ID_82580_SGMII: + case E1000_DEV_ID_82580_COPPER_DUAL: + case E1000_DEV_ID_82580_QUAD_FIBER: + case E1000_DEV_ID_DH89XXCC_SGMII: + case E1000_DEV_ID_DH89XXCC_SERDES: + case E1000_DEV_ID_DH89XXCC_BACKPLANE: + case E1000_DEV_ID_DH89XXCC_SFP: + mac->type = e1000_82580; + break; + case E1000_DEV_ID_I350_COPPER: + case E1000_DEV_ID_I350_FIBER: + case E1000_DEV_ID_I350_SERDES: + case E1000_DEV_ID_I350_SGMII: + case E1000_DEV_ID_I350_DA4: + mac->type = e1000_i350; + break; + case E1000_DEV_ID_I210_COPPER_FLASHLESS: + case E1000_DEV_ID_I210_SERDES_FLASHLESS: + case E1000_DEV_ID_I210_COPPER: + case E1000_DEV_ID_I210_COPPER_OEM1: + case E1000_DEV_ID_I210_COPPER_IT: + case E1000_DEV_ID_I210_FIBER: + case E1000_DEV_ID_I210_SERDES: + case E1000_DEV_ID_I210_SGMII: + mac->type = e1000_i210; + break; + case E1000_DEV_ID_I211_COPPER: + mac->type = e1000_i211; + break; + + case E1000_DEV_ID_I354_BACKPLANE_1GBPS: + case E1000_DEV_ID_I354_SGMII: + case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS: + mac->type = e1000_i354; + break; + default: + /* Should never have loaded on this device */ + ret_val = -E1000_ERR_MAC_INIT; + break; + } + + return ret_val; +} + +/** + * e1000_setup_init_funcs - Initializes function pointers + * @hw: pointer to the HW structure + * @init_device: true will initialize the rest of the function pointers + * getting the device ready for use. false will only set + * MAC type and the function pointers for the other init + * functions. Passing false will not generate any hardware + * reads or writes. + * + * This function must be called by a driver in order to use the rest + * of the 'shared' code files. Called by drivers only. + **/ +s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device) +{ + s32 ret_val; + + /* Can't do much good without knowing the MAC type. */ + ret_val = e1000_set_mac_type(hw); + if (ret_val) { + DEBUGOUT("ERROR: MAC type could not be set properly.\n"); + goto out; + } + + if (!hw->hw_addr) { + DEBUGOUT("ERROR: Registers not mapped\n"); + ret_val = -E1000_ERR_CONFIG; + goto out; + } + + /* + * Init function pointers to generic implementations. We do this first + * allowing a driver module to override it afterward. + */ + e1000_init_mac_ops_generic(hw); + e1000_init_phy_ops_generic(hw); + e1000_init_nvm_ops_generic(hw); + e1000_init_mbx_ops_generic(hw); + + /* + * Set up the init function pointers. These are functions within the + * adapter family file that sets up function pointers for the rest of + * the functions in that family. + */ + switch (hw->mac.type) { + case e1000_82575: + case e1000_82576: + case e1000_82580: + case e1000_i350: + case e1000_i354: + e1000_init_function_pointers_82575(hw); + break; + case e1000_i210: + case e1000_i211: + e1000_init_function_pointers_i210(hw); + break; + default: + DEBUGOUT("Hardware not supported\n"); + ret_val = -E1000_ERR_CONFIG; + break; + } + + /* + * Initialize the rest of the function pointers. These require some + * register reads/writes in some cases. + */ + if (!(ret_val) && init_device) { + ret_val = e1000_init_mac_params(hw); + if (ret_val) + goto out; + + ret_val = e1000_init_nvm_params(hw); + if (ret_val) + goto out; + + ret_val = e1000_init_phy_params(hw); + if (ret_val) + goto out; + + ret_val = e1000_init_mbx_params(hw); + if (ret_val) + goto out; + } + +out: + return ret_val; +} + +/** + * e1000_get_bus_info - Obtain bus information for adapter + * @hw: pointer to the HW structure + * + * This will obtain information about the HW bus for which the + * adapter is attached and stores it in the hw structure. This is a + * function pointer entry point called by drivers. + **/ +s32 e1000_get_bus_info(struct e1000_hw *hw) +{ + if (hw->mac.ops.get_bus_info) + return hw->mac.ops.get_bus_info(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_clear_vfta - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * This clears the VLAN filter table on the adapter. This is a function + * pointer entry point called by drivers. + **/ +void e1000_clear_vfta(struct e1000_hw *hw) +{ + if (hw->mac.ops.clear_vfta) + hw->mac.ops.clear_vfta(hw); +} + +/** + * e1000_write_vfta - Write value to VLAN filter table + * @hw: pointer to the HW structure + * @offset: the 32-bit offset in which to write the value to. + * @value: the 32-bit value to write at location offset. + * + * This writes a 32-bit value to a 32-bit offset in the VLAN filter + * table. This is a function pointer entry point called by drivers. + **/ +void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) +{ + if (hw->mac.ops.write_vfta) + hw->mac.ops.write_vfta(hw, offset, value); +} + +/** + * e1000_update_mc_addr_list - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * + * Updates the Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + **/ +void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count) +{ + if (hw->mac.ops.update_mc_addr_list) + hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, + mc_addr_count); +} + +/** + * e1000_force_mac_fc - Force MAC flow control + * @hw: pointer to the HW structure + * + * Force the MAC's flow control settings. Currently no func pointer exists + * and all implementations are handled in the generic version of this + * function. + **/ +s32 e1000_force_mac_fc(struct e1000_hw *hw) +{ + return e1000_force_mac_fc_generic(hw); +} + +/** + * e1000_check_for_link - Check/Store link connection + * @hw: pointer to the HW structure + * + * This checks the link condition of the adapter and stores the + * results in the hw->mac structure. This is a function pointer entry + * point called by drivers. + **/ +s32 e1000_check_for_link(struct e1000_hw *hw) +{ + if (hw->mac.ops.check_for_link) + return hw->mac.ops.check_for_link(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_check_mng_mode - Check management mode + * @hw: pointer to the HW structure + * + * This checks if the adapter has manageability enabled. + * This is a function pointer entry point called by drivers. + **/ +bool e1000_check_mng_mode(struct e1000_hw *hw) +{ + if (hw->mac.ops.check_mng_mode) + return hw->mac.ops.check_mng_mode(hw); + + return false; +} + +/** + * e1000_mng_write_dhcp_info - Writes DHCP info to host interface + * @hw: pointer to the HW structure + * @buffer: pointer to the host interface + * @length: size of the buffer + * + * Writes the DHCP information to the host interface. + **/ +s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) +{ + return e1000_mng_write_dhcp_info_generic(hw, buffer, length); +} + +/** + * e1000_reset_hw - Reset hardware + * @hw: pointer to the HW structure + * + * This resets the hardware into a known state. This is a function pointer + * entry point called by drivers. + **/ +s32 e1000_reset_hw(struct e1000_hw *hw) +{ + if (hw->mac.ops.reset_hw) + return hw->mac.ops.reset_hw(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_init_hw - Initialize hardware + * @hw: pointer to the HW structure + * + * This inits the hardware readying it for operation. This is a function + * pointer entry point called by drivers. + **/ +s32 e1000_init_hw(struct e1000_hw *hw) +{ + if (hw->mac.ops.init_hw) + return hw->mac.ops.init_hw(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_setup_link - Configures link and flow control + * @hw: pointer to the HW structure + * + * This configures link and flow control settings for the adapter. This + * is a function pointer entry point called by drivers. While modules can + * also call this, they probably call their own version of this function. + **/ +s32 e1000_setup_link(struct e1000_hw *hw) +{ + if (hw->mac.ops.setup_link) + return hw->mac.ops.setup_link(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_get_speed_and_duplex - Returns current speed and duplex + * @hw: pointer to the HW structure + * @speed: pointer to a 16-bit value to store the speed + * @duplex: pointer to a 16-bit value to store the duplex. + * + * This returns the speed and duplex of the adapter in the two 'out' + * variables passed in. This is a function pointer entry point called + * by drivers. + **/ +s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) +{ + if (hw->mac.ops.get_link_up_info) + return hw->mac.ops.get_link_up_info(hw, speed, duplex); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_setup_led - Configures SW controllable LED + * @hw: pointer to the HW structure + * + * This prepares the SW controllable LED for use and saves the current state + * of the LED so it can be later restored. This is a function pointer entry + * point called by drivers. + **/ +s32 e1000_setup_led(struct e1000_hw *hw) +{ + if (hw->mac.ops.setup_led) + return hw->mac.ops.setup_led(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_cleanup_led - Restores SW controllable LED + * @hw: pointer to the HW structure + * + * This restores the SW controllable LED to the value saved off by + * e1000_setup_led. This is a function pointer entry point called by drivers. + **/ +s32 e1000_cleanup_led(struct e1000_hw *hw) +{ + if (hw->mac.ops.cleanup_led) + return hw->mac.ops.cleanup_led(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_blink_led - Blink SW controllable LED + * @hw: pointer to the HW structure + * + * This starts the adapter LED blinking. Request the LED to be setup first + * and cleaned up after. This is a function pointer entry point called by + * drivers. + **/ +s32 e1000_blink_led(struct e1000_hw *hw) +{ + if (hw->mac.ops.blink_led) + return hw->mac.ops.blink_led(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_id_led_init - store LED configurations in SW + * @hw: pointer to the HW structure + * + * Initializes the LED config in SW. This is a function pointer entry point + * called by drivers. + **/ +s32 e1000_id_led_init(struct e1000_hw *hw) +{ + if (hw->mac.ops.id_led_init) + return hw->mac.ops.id_led_init(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_led_on - Turn on SW controllable LED + * @hw: pointer to the HW structure + * + * Turns the SW defined LED on. This is a function pointer entry point + * called by drivers. + **/ +s32 e1000_led_on(struct e1000_hw *hw) +{ + if (hw->mac.ops.led_on) + return hw->mac.ops.led_on(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_led_off - Turn off SW controllable LED + * @hw: pointer to the HW structure + * + * Turns the SW defined LED off. This is a function pointer entry point + * called by drivers. + **/ +s32 e1000_led_off(struct e1000_hw *hw) +{ + if (hw->mac.ops.led_off) + return hw->mac.ops.led_off(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_reset_adaptive - Reset adaptive IFS + * @hw: pointer to the HW structure + * + * Resets the adaptive IFS. Currently no func pointer exists and all + * implementations are handled in the generic version of this function. + **/ +void e1000_reset_adaptive(struct e1000_hw *hw) +{ + e1000_reset_adaptive_generic(hw); +} + +/** + * e1000_update_adaptive - Update adaptive IFS + * @hw: pointer to the HW structure + * + * Updates adapter IFS. Currently no func pointer exists and all + * implementations are handled in the generic version of this function. + **/ +void e1000_update_adaptive(struct e1000_hw *hw) +{ + e1000_update_adaptive_generic(hw); +} + +/** + * e1000_disable_pcie_master - Disable PCI-Express master access + * @hw: pointer to the HW structure + * + * Disables PCI-Express master access and verifies there are no pending + * requests. Currently no func pointer exists and all implementations are + * handled in the generic version of this function. + **/ +s32 e1000_disable_pcie_master(struct e1000_hw *hw) +{ + return e1000_disable_pcie_master_generic(hw); +} + +/** + * e1000_config_collision_dist - Configure collision distance + * @hw: pointer to the HW structure + * + * Configures the collision distance to the default value and is used + * during link setup. + **/ +void e1000_config_collision_dist(struct e1000_hw *hw) +{ + if (hw->mac.ops.config_collision_dist) + hw->mac.ops.config_collision_dist(hw); +} + +/** + * e1000_rar_set - Sets a receive address register + * @hw: pointer to the HW structure + * @addr: address to set the RAR to + * @index: the RAR to set + * + * Sets a Receive Address Register (RAR) to the specified address. + **/ +void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) +{ + if (hw->mac.ops.rar_set) + hw->mac.ops.rar_set(hw, addr, index); +} + +/** + * e1000_validate_mdi_setting - Ensures valid MDI/MDIX SW state + * @hw: pointer to the HW structure + * + * Ensures that the MDI/MDIX SW state is valid. + **/ +s32 e1000_validate_mdi_setting(struct e1000_hw *hw) +{ + if (hw->mac.ops.validate_mdi_setting) + return hw->mac.ops.validate_mdi_setting(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_hash_mc_addr - Determines address location in multicast table + * @hw: pointer to the HW structure + * @mc_addr: Multicast address to hash. + * + * This hashes an address to determine its location in the multicast + * table. Currently no func pointer exists and all implementations + * are handled in the generic version of this function. + **/ +u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) +{ + return e1000_hash_mc_addr_generic(hw, mc_addr); +} + +/** + * e1000_enable_tx_pkt_filtering - Enable packet filtering on TX + * @hw: pointer to the HW structure + * + * Enables packet filtering on transmit packets if manageability is enabled + * and host interface is enabled. + * Currently no func pointer exists and all implementations are handled in the + * generic version of this function. + **/ +bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) +{ + return e1000_enable_tx_pkt_filtering_generic(hw); +} + +/** + * e1000_mng_host_if_write - Writes to the manageability host interface + * @hw: pointer to the HW structure + * @buffer: pointer to the host interface buffer + * @length: size of the buffer + * @offset: location in the buffer to write to + * @sum: sum of the data (not checksum) + * + * This function writes the buffer content at the offset given on the host if. + * It also does alignment considerations to do the writes in most efficient + * way. Also fills up the sum of the buffer in *buffer parameter. + **/ +s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, + u16 offset, u8 *sum) +{ + return e1000_mng_host_if_write_generic(hw, buffer, length, offset, sum); +} + +/** + * e1000_mng_write_cmd_header - Writes manageability command header + * @hw: pointer to the HW structure + * @hdr: pointer to the host interface command header + * + * Writes the command header after does the checksum calculation. + **/ +s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr) +{ + return e1000_mng_write_cmd_header_generic(hw, hdr); +} + +/** + * e1000_mng_enable_host_if - Checks host interface is enabled + * @hw: pointer to the HW structure + * + * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND + * + * This function checks whether the HOST IF is enabled for command operation + * and also checks whether the previous command is completed. It busy waits + * in case of previous command is not completed. + **/ +s32 e1000_mng_enable_host_if(struct e1000_hw *hw) +{ + return e1000_mng_enable_host_if_generic(hw); +} + +/** + * e1000_check_reset_block - Verifies PHY can be reset + * @hw: pointer to the HW structure + * + * Checks if the PHY is in a state that can be reset or if manageability + * has it tied up. This is a function pointer entry point called by drivers. + **/ +s32 e1000_check_reset_block(struct e1000_hw *hw) +{ + if (hw->phy.ops.check_reset_block) + return hw->phy.ops.check_reset_block(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_read_phy_reg - Reads PHY register + * @hw: pointer to the HW structure + * @offset: the register to read + * @data: the buffer to store the 16-bit read. + * + * Reads the PHY register and returns the value in data. + * This is a function pointer entry point called by drivers. + **/ +s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data) +{ + if (hw->phy.ops.read_reg) + return hw->phy.ops.read_reg(hw, offset, data); + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg - Writes PHY register + * @hw: pointer to the HW structure + * @offset: the register to write + * @data: the value to write. + * + * Writes the PHY register at offset with the value in data. + * This is a function pointer entry point called by drivers. + **/ +s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data) +{ + if (hw->phy.ops.write_reg) + return hw->phy.ops.write_reg(hw, offset, data); + + return E1000_SUCCESS; +} + +/** + * e1000_release_phy - Generic release PHY + * @hw: pointer to the HW structure + * + * Return if silicon family does not require a semaphore when accessing the + * PHY. + **/ +void e1000_release_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.release) + hw->phy.ops.release(hw); +} + +/** + * e1000_acquire_phy - Generic acquire PHY + * @hw: pointer to the HW structure + * + * Return success if silicon family does not require a semaphore when + * accessing the PHY. + **/ +s32 e1000_acquire_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.acquire) + return hw->phy.ops.acquire(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_read_kmrn_reg - Reads register using Kumeran interface + * @hw: pointer to the HW structure + * @offset: the register to read + * @data: the location to store the 16-bit value read. + * + * Reads a register out of the Kumeran interface. Currently no func pointer + * exists and all implementations are handled in the generic version of + * this function. + **/ +s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return e1000_read_kmrn_reg_generic(hw, offset, data); +} + +/** + * e1000_write_kmrn_reg - Writes register using Kumeran interface + * @hw: pointer to the HW structure + * @offset: the register to write + * @data: the value to write. + * + * Writes a register to the Kumeran interface. Currently no func pointer + * exists and all implementations are handled in the generic version of + * this function. + **/ +s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) +{ + return e1000_write_kmrn_reg_generic(hw, offset, data); +} + +/** + * e1000_get_cable_length - Retrieves cable length estimation + * @hw: pointer to the HW structure + * + * This function estimates the cable length and stores them in + * hw->phy.min_length and hw->phy.max_length. This is a function pointer + * entry point called by drivers. + **/ +s32 e1000_get_cable_length(struct e1000_hw *hw) +{ + if (hw->phy.ops.get_cable_length) + return hw->phy.ops.get_cable_length(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_get_phy_info - Retrieves PHY information from registers + * @hw: pointer to the HW structure + * + * This function gets some information from various PHY registers and + * populates hw->phy values with it. This is a function pointer entry + * point called by drivers. + **/ +s32 e1000_get_phy_info(struct e1000_hw *hw) +{ + if (hw->phy.ops.get_info) + return hw->phy.ops.get_info(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_phy_hw_reset - Hard PHY reset + * @hw: pointer to the HW structure + * + * Performs a hard PHY reset. This is a function pointer entry point called + * by drivers. + **/ +s32 e1000_phy_hw_reset(struct e1000_hw *hw) +{ + if (hw->phy.ops.reset) + return hw->phy.ops.reset(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_phy_commit - Soft PHY reset + * @hw: pointer to the HW structure + * + * Performs a soft PHY reset on those that apply. This is a function pointer + * entry point called by drivers. + **/ +s32 e1000_phy_commit(struct e1000_hw *hw) +{ + if (hw->phy.ops.commit) + return hw->phy.ops.commit(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_set_d0_lplu_state - Sets low power link up state for D0 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D0 + * and SmartSpeed is disabled when active is true, else clear lplu for D0 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. This is a function pointer entry point called by drivers. + **/ +s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) +{ + if (hw->phy.ops.set_d0_lplu_state) + return hw->phy.ops.set_d0_lplu_state(hw, active); + + return E1000_SUCCESS; +} + +/** + * e1000_set_d3_lplu_state - Sets low power link up state for D3 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D3 + * and SmartSpeed is disabled when active is true, else clear lplu for D3 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. This is a function pointer entry point called by drivers. + **/ +s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) +{ + if (hw->phy.ops.set_d3_lplu_state) + return hw->phy.ops.set_d3_lplu_state(hw, active); + + return E1000_SUCCESS; +} + +/** + * e1000_read_mac_addr - Reads MAC address + * @hw: pointer to the HW structure + * + * Reads the MAC address out of the adapter and stores it in the HW structure. + * Currently no func pointer exists and all implementations are handled in the + * generic version of this function. + **/ +s32 e1000_read_mac_addr(struct e1000_hw *hw) +{ + if (hw->mac.ops.read_mac_addr) + return hw->mac.ops.read_mac_addr(hw); + + return e1000_read_mac_addr_generic(hw); +} + +/** + * e1000_read_pba_string - Read device part number string + * @hw: pointer to the HW structure + * @pba_num: pointer to device part number + * @pba_num_size: size of part number buffer + * + * Reads the product board assembly (PBA) number from the EEPROM and stores + * the value in pba_num. + * Currently no func pointer exists and all implementations are handled in the + * generic version of this function. + **/ +s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size) +{ + return e1000_read_pba_string_generic(hw, pba_num, pba_num_size); +} + +/** + * e1000_read_pba_length - Read device part number string length + * @hw: pointer to the HW structure + * @pba_num_size: size of part number buffer + * + * Reads the product board assembly (PBA) number length from the EEPROM and + * stores the value in pba_num. + * Currently no func pointer exists and all implementations are handled in the + * generic version of this function. + **/ +s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size) +{ + return e1000_read_pba_length_generic(hw, pba_num_size); +} + +/** + * e1000_validate_nvm_checksum - Verifies NVM (EEPROM) checksum + * @hw: pointer to the HW structure + * + * Validates the NVM checksum is correct. This is a function pointer entry + * point called by drivers. + **/ +s32 e1000_validate_nvm_checksum(struct e1000_hw *hw) +{ + if (hw->nvm.ops.validate) + return hw->nvm.ops.validate(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_update_nvm_checksum - Updates NVM (EEPROM) checksum + * @hw: pointer to the HW structure + * + * Updates the NVM checksum. Currently no func pointer exists and all + * implementations are handled in the generic version of this function. + **/ +s32 e1000_update_nvm_checksum(struct e1000_hw *hw) +{ + if (hw->nvm.ops.update) + return hw->nvm.ops.update(hw); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_reload_nvm - Reloads EEPROM + * @hw: pointer to the HW structure + * + * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the + * extended control register. + **/ +void e1000_reload_nvm(struct e1000_hw *hw) +{ + if (hw->nvm.ops.reload) + hw->nvm.ops.reload(hw); +} + +/** + * e1000_read_nvm - Reads NVM (EEPROM) + * @hw: pointer to the HW structure + * @offset: the word offset to read + * @words: number of 16-bit words to read + * @data: pointer to the properly sized buffer for the data. + * + * Reads 16-bit chunks of data from the NVM (EEPROM). This is a function + * pointer entry point called by drivers. + **/ +s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + if (hw->nvm.ops.read) + return hw->nvm.ops.read(hw, offset, words, data); + + return -E1000_ERR_CONFIG; +} + +/** + * e1000_write_nvm - Writes to NVM (EEPROM) + * @hw: pointer to the HW structure + * @offset: the word offset to read + * @words: number of 16-bit words to write + * @data: pointer to the properly sized buffer for the data. + * + * Writes 16-bit chunks of data to the NVM (EEPROM). This is a function + * pointer entry point called by drivers. + **/ +s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + if (hw->nvm.ops.write) + return hw->nvm.ops.write(hw, offset, words, data); + + return E1000_SUCCESS; +} + +/** + * e1000_write_8bit_ctrl_reg - Writes 8bit Control register + * @hw: pointer to the HW structure + * @reg: 32bit register offset + * @offset: the register to write + * @data: the value to write. + * + * Writes the PHY register at offset with the value in data. + * This is a function pointer entry point called by drivers. + **/ +s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, + u8 data) +{ + return e1000_write_8bit_ctrl_reg_generic(hw, reg, offset, data); +} + +/** + * e1000_power_up_phy - Restores link in case of PHY power down + * @hw: pointer to the HW structure + * + * The phy may be powered down to save power, to turn off link when the + * driver is unloaded, or wake on lan is not enabled (among others). + **/ +void e1000_power_up_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.power_up) + hw->phy.ops.power_up(hw); + + e1000_setup_link(hw); +} + +/** + * e1000_power_down_phy - Power down PHY + * @hw: pointer to the HW structure + * + * The phy may be powered down to save power, to turn off link when the + * driver is unloaded, or wake on lan is not enabled (among others). + **/ +void e1000_power_down_phy(struct e1000_hw *hw) +{ + if (hw->phy.ops.power_down) + hw->phy.ops.power_down(hw); +} + +/** + * e1000_power_up_fiber_serdes_link - Power up serdes link + * @hw: pointer to the HW structure + * + * Power on the optics and PCS. + **/ +void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw) +{ + if (hw->mac.ops.power_up_serdes) + hw->mac.ops.power_up_serdes(hw); +} + +/** + * e1000_shutdown_fiber_serdes_link - Remove link during power down + * @hw: pointer to the HW structure + * + * Shutdown the optics and PCS on driver unload. + **/ +void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw) +{ + if (hw->mac.ops.shutdown_serdes) + hw->mac.ops.shutdown_serdes(hw); +} + +/** + * e1000_get_thermal_sensor_data - Gathers thermal sensor data + * @hw: pointer to hardware structure + * + * Updates the temperatures in mac.thermal_sensor_data + **/ +s32 e1000_get_thermal_sensor_data(struct e1000_hw *hw) +{ + if (hw->mac.ops.get_thermal_sensor_data) + return hw->mac.ops.get_thermal_sensor_data(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_init_thermal_sensor_thresh - Sets thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Sets the thermal sensor thresholds according to the NVM map + **/ +s32 e1000_init_thermal_sensor_thresh(struct e1000_hw *hw) +{ + if (hw->mac.ops.init_thermal_sensor_thresh) + return hw->mac.ops.init_thermal_sensor_thresh(hw); + + return E1000_SUCCESS; +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_api.h b/kernel/linux/kni/ethtool/igb/e1000_api.h new file mode 100644 index 00000000..0bc00acd --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_api.h @@ -0,0 +1,142 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_API_H_ +#define _E1000_API_H_ + +#include "e1000_hw.h" + +extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); +extern void e1000_rx_fifo_flush_82575(struct e1000_hw *hw); +extern void e1000_init_function_pointers_vf(struct e1000_hw *hw); +extern void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw); +extern void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw); +extern void e1000_init_function_pointers_i210(struct e1000_hw *hw); + +s32 e1000_set_obff_timer(struct e1000_hw *hw, u32 itr); +s32 e1000_set_mac_type(struct e1000_hw *hw); +s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device); +s32 e1000_init_mac_params(struct e1000_hw *hw); +s32 e1000_init_nvm_params(struct e1000_hw *hw); +s32 e1000_init_phy_params(struct e1000_hw *hw); +s32 e1000_init_mbx_params(struct e1000_hw *hw); +s32 e1000_get_bus_info(struct e1000_hw *hw); +void e1000_clear_vfta(struct e1000_hw *hw); +void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value); +s32 e1000_force_mac_fc(struct e1000_hw *hw); +s32 e1000_check_for_link(struct e1000_hw *hw); +s32 e1000_reset_hw(struct e1000_hw *hw); +s32 e1000_init_hw(struct e1000_hw *hw); +s32 e1000_setup_link(struct e1000_hw *hw); +s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex); +s32 e1000_disable_pcie_master(struct e1000_hw *hw); +void e1000_config_collision_dist(struct e1000_hw *hw); +void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); +u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); +void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count); +s32 e1000_setup_led(struct e1000_hw *hw); +s32 e1000_cleanup_led(struct e1000_hw *hw); +s32 e1000_check_reset_block(struct e1000_hw *hw); +s32 e1000_blink_led(struct e1000_hw *hw); +s32 e1000_led_on(struct e1000_hw *hw); +s32 e1000_led_off(struct e1000_hw *hw); +s32 e1000_id_led_init(struct e1000_hw *hw); +void e1000_reset_adaptive(struct e1000_hw *hw); +void e1000_update_adaptive(struct e1000_hw *hw); +s32 e1000_get_cable_length(struct e1000_hw *hw); +s32 e1000_validate_mdi_setting(struct e1000_hw *hw); +s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, + u8 data); +s32 e1000_get_phy_info(struct e1000_hw *hw); +void e1000_release_phy(struct e1000_hw *hw); +s32 e1000_acquire_phy(struct e1000_hw *hw); +s32 e1000_phy_hw_reset(struct e1000_hw *hw); +s32 e1000_phy_commit(struct e1000_hw *hw); +void e1000_power_up_phy(struct e1000_hw *hw); +void e1000_power_down_phy(struct e1000_hw *hw); +s32 e1000_read_mac_addr(struct e1000_hw *hw); +s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size); +s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size); +void e1000_reload_nvm(struct e1000_hw *hw); +s32 e1000_update_nvm_checksum(struct e1000_hw *hw); +s32 e1000_validate_nvm_checksum(struct e1000_hw *hw); +s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active); +s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); +bool e1000_check_mng_mode(struct e1000_hw *hw); +bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); +s32 e1000_mng_enable_host_if(struct e1000_hw *hw); +s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, + u16 offset, u8 *sum); +s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr); +s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length); +s32 e1000_get_thermal_sensor_data(struct e1000_hw *hw); +s32 e1000_init_thermal_sensor_thresh(struct e1000_hw *hw); + + + +/* + * TBI_ACCEPT macro definition: + * + * This macro requires: + * adapter = a pointer to struct e1000_hw + * status = the 8 bit status field of the Rx descriptor with EOP set + * error = the 8 bit error field of the Rx descriptor with EOP set + * length = the sum of all the length fields of the Rx descriptors that + * make up the current frame + * last_byte = the last byte of the frame DMAed by the hardware + * max_frame_length = the maximum frame length we want to accept. + * min_frame_length = the minimum frame length we want to accept. + * + * This macro is a conditional that should be used in the interrupt + * handler's Rx processing routine when RxErrors have been detected. + * + * Typical use: + * ... + * if (TBI_ACCEPT) { + * accept_frame = true; + * e1000_tbi_adjust_stats(adapter, MacAddress); + * frame_length--; + * } else { + * accept_frame = false; + * } + * ... + */ + +/* The carrier extension symbol, as received by the NIC. */ +#define CARRIER_EXTENSION 0x0F + +#define TBI_ACCEPT(a, status, errors, length, last_byte, \ + min_frame_size, max_frame_size) \ + (e1000_tbi_sbp_enabled_82543(a) && \ + (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \ + ((last_byte) == CARRIER_EXTENSION) && \ + (((status) & E1000_RXD_STAT_VP) ? \ + (((length) > (min_frame_size - VLAN_TAG_SIZE)) && \ + ((length) <= (max_frame_size + 1))) : \ + (((length) > min_frame_size) && \ + ((length) <= (max_frame_size + VLAN_TAG_SIZE + 1))))) + +#ifndef E1000_MAX +#define E1000_MAX(a, b) ((a) > (b) ? (a) : (b)) +#endif +#ifndef E1000_DIVIDE_ROUND_UP +#define E1000_DIVIDE_ROUND_UP(a, b) (((a) + (b) - 1) / (b)) /* ceil(a/b) */ +#endif +#endif /* _E1000_API_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_defines.h b/kernel/linux/kni/ethtool/igb/e1000_defines.h new file mode 100644 index 00000000..b39aaf80 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_defines.h @@ -0,0 +1,1365 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_DEFINES_H_ +#define _E1000_DEFINES_H_ + +/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ +#define REQ_TX_DESCRIPTOR_MULTIPLE 8 +#define REQ_RX_DESCRIPTOR_MULTIPLE 8 + +/* Definitions for power management and wakeup registers */ +/* Wake Up Control */ +#define E1000_WUC_APME 0x00000001 /* APM Enable */ +#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ +#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ +#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ +#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */ + +/* Wake Up Filter Control */ +#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ +#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ +#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ +#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ +#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ + +/* Wake Up Status */ +#define E1000_WUS_LNKC E1000_WUFC_LNKC +#define E1000_WUS_MAG E1000_WUFC_MAG +#define E1000_WUS_EX E1000_WUFC_EX +#define E1000_WUS_MC E1000_WUFC_MC +#define E1000_WUS_BC E1000_WUFC_BC + +/* Extended Device Control */ +#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* SW Definable Pin 4 data */ +#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* SW Definable Pin 6 data */ +#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* SW Definable Pin 3 data */ +#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */ +#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* Direction of SDP3 0=in 1=out */ +#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ +/* Physical Func Reset Done Indication */ +#define E1000_CTRL_EXT_PFRSTD 0x00004000 +#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ +#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ +#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clk Gating */ +#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 +/* Offset of the link mode field in Ctrl Ext register */ +#define E1000_CTRL_EXT_LINK_MODE_OFFSET 22 +#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 +#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 +#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 +#define E1000_CTRL_EXT_EIAME 0x01000000 +#define E1000_CTRL_EXT_IRCA 0x00000001 +#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Drv loaded bit for FW */ +#define E1000_CTRL_EXT_IAME 0x08000000 /* Int ACK Auto-mask */ +#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ +#define E1000_I2CCMD_REG_ADDR_SHIFT 16 +#define E1000_I2CCMD_PHY_ADDR_SHIFT 24 +#define E1000_I2CCMD_OPCODE_READ 0x08000000 +#define E1000_I2CCMD_OPCODE_WRITE 0x00000000 +#define E1000_I2CCMD_READY 0x20000000 +#define E1000_I2CCMD_ERROR 0x80000000 +#define E1000_I2CCMD_SFP_DATA_ADDR(a) (0x0000 + (a)) +#define E1000_I2CCMD_SFP_DIAG_ADDR(a) (0x0100 + (a)) +#define E1000_MAX_SGMII_PHY_REG_ADDR 255 +#define E1000_I2CCMD_PHY_TIMEOUT 200 +#define E1000_IVAR_VALID 0x80 +#define E1000_GPIE_NSICR 0x00000001 +#define E1000_GPIE_MSIX_MODE 0x00000010 +#define E1000_GPIE_EIAME 0x40000000 +#define E1000_GPIE_PBA 0x80000000 + +/* Receive Descriptor bit definitions */ +#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ +#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ +#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ +#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ +#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ +#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ +#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ +#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ +#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ +#define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ +#define E1000_RXD_ERR_CE 0x01 /* CRC Error */ +#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ +#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ +#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ +#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ +#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ +#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ +#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ + +#define E1000_RXDEXT_STATERR_TST 0x00000100 /* Time Stamp taken */ +#define E1000_RXDEXT_STATERR_LB 0x00040000 +#define E1000_RXDEXT_STATERR_CE 0x01000000 +#define E1000_RXDEXT_STATERR_SE 0x02000000 +#define E1000_RXDEXT_STATERR_SEQ 0x04000000 +#define E1000_RXDEXT_STATERR_CXE 0x10000000 +#define E1000_RXDEXT_STATERR_TCPE 0x20000000 +#define E1000_RXDEXT_STATERR_IPE 0x40000000 +#define E1000_RXDEXT_STATERR_RXE 0x80000000 + +/* mask to determine if packets should be dropped due to frame errors */ +#define E1000_RXD_ERR_FRAME_ERR_MASK ( \ + E1000_RXD_ERR_CE | \ + E1000_RXD_ERR_SE | \ + E1000_RXD_ERR_SEQ | \ + E1000_RXD_ERR_CXE | \ + E1000_RXD_ERR_RXE) + +/* Same mask, but for extended and packet split descriptors */ +#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) + +#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 +#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 +#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000 +#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 + +#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000 + +/* Management Control */ +#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ +#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ +#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ +#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ +#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ +/* Enable MAC address filtering */ +#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 +/* Enable MNG packets to host memory */ +#define E1000_MANC_EN_MNG2HOST 0x00200000 + +#define E1000_MANC2H_PORT_623 0x00000020 /* Port 0x26f */ +#define E1000_MANC2H_PORT_664 0x00000040 /* Port 0x298 */ +#define E1000_MDEF_PORT_623 0x00000800 /* Port 0x26f */ +#define E1000_MDEF_PORT_664 0x00000400 /* Port 0x298 */ + +/* Receive Control */ +#define E1000_RCTL_RST 0x00000001 /* Software reset */ +#define E1000_RCTL_EN 0x00000002 /* enable */ +#define E1000_RCTL_SBP 0x00000004 /* store bad packet */ +#define E1000_RCTL_UPE 0x00000008 /* unicast promisc enable */ +#define E1000_RCTL_MPE 0x00000010 /* multicast promisc enable */ +#define E1000_RCTL_LPE 0x00000020 /* long packet enable */ +#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ +#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ +#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ +#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ +#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min thresh size */ +#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ +#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ +#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ +/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ +#define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */ +#define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */ +#define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */ +#define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */ +/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ +#define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */ +#define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */ +#define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */ +#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ +#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ +#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ +#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ +#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ +#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ +#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ + +/* Use byte values for the following shift parameters + * Usage: + * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & + * E1000_PSRCTL_BSIZE0_MASK) | + * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) & + * E1000_PSRCTL_BSIZE1_MASK) | + * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) & + * E1000_PSRCTL_BSIZE2_MASK) | + * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |; + * E1000_PSRCTL_BSIZE3_MASK)) + * where value0 = [128..16256], default=256 + * value1 = [1024..64512], default=4096 + * value2 = [0..64512], default=4096 + * value3 = [0..64512], default=0 + */ + +#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F +#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 +#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 +#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 + +#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ +#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ +#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ +#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ + +/* SWFW_SYNC Definitions */ +#define E1000_SWFW_EEP_SM 0x01 +#define E1000_SWFW_PHY0_SM 0x02 +#define E1000_SWFW_PHY1_SM 0x04 +#define E1000_SWFW_CSR_SM 0x08 +#define E1000_SWFW_PHY2_SM 0x20 +#define E1000_SWFW_PHY3_SM 0x40 +#define E1000_SWFW_SW_MNG_SM 0x400 + +/* Device Control */ +#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ +#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ +#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master reqs */ +#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ +#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ +#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ +#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ +#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ +#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ +#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ +#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ +#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ +#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ +#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ +#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ +#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */ +#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ +#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ +#define E1000_CTRL_RST 0x04000000 /* Global reset */ +#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ +#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ +#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ +#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ +#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */ + + +#define E1000_CONNSW_ENRGSRC 0x4 +#define E1000_CONNSW_PHYSD 0x400 +#define E1000_CONNSW_PHY_PDN 0x800 +#define E1000_CONNSW_SERDESD 0x200 +#define E1000_CONNSW_AUTOSENSE_CONF 0x2 +#define E1000_CONNSW_AUTOSENSE_EN 0x1 +#define E1000_PCS_CFG_PCS_EN 8 +#define E1000_PCS_LCTL_FLV_LINK_UP 1 +#define E1000_PCS_LCTL_FSV_10 0 +#define E1000_PCS_LCTL_FSV_100 2 +#define E1000_PCS_LCTL_FSV_1000 4 +#define E1000_PCS_LCTL_FDV_FULL 8 +#define E1000_PCS_LCTL_FSD 0x10 +#define E1000_PCS_LCTL_FORCE_LINK 0x20 +#define E1000_PCS_LCTL_FORCE_FCTRL 0x80 +#define E1000_PCS_LCTL_AN_ENABLE 0x10000 +#define E1000_PCS_LCTL_AN_RESTART 0x20000 +#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000 +#define E1000_ENABLE_SERDES_LOOPBACK 0x0410 + +#define E1000_PCS_LSTS_LINK_OK 1 +#define E1000_PCS_LSTS_SPEED_100 2 +#define E1000_PCS_LSTS_SPEED_1000 4 +#define E1000_PCS_LSTS_DUPLEX_FULL 8 +#define E1000_PCS_LSTS_SYNK_OK 0x10 +#define E1000_PCS_LSTS_AN_COMPLETE 0x10000 + +/* Device Status */ +#define E1000_STATUS_FD 0x00000001 /* Duplex 0=half 1=full */ +#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ +#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ +#define E1000_STATUS_FUNC_SHIFT 2 +#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ +#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ +#define E1000_STATUS_SPEED_MASK 0x000000C0 +#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ +#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ +#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ +#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Compltn by NVM */ +#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */ +#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Master request status */ +#define E1000_STATUS_2P5_SKU 0x00001000 /* Val of 2.5GBE SKU strap */ +#define E1000_STATUS_2P5_SKU_OVER 0x00002000 /* Val of 2.5GBE SKU Over */ + +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define SPEED_2500 2500 +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 + + +#define ADVERTISE_10_HALF 0x0001 +#define ADVERTISE_10_FULL 0x0002 +#define ADVERTISE_100_HALF 0x0004 +#define ADVERTISE_100_FULL 0x0008 +#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */ +#define ADVERTISE_1000_FULL 0x0020 + +/* 1000/H is not supported, nor spec-compliant. */ +#define E1000_ALL_SPEED_DUPLEX ( \ + ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ + ADVERTISE_100_FULL | ADVERTISE_1000_FULL) +#define E1000_ALL_NOT_GIG ( \ + ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ + ADVERTISE_100_FULL) +#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL) +#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL) +#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF) + +#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX + +/* LED Control */ +#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F +#define E1000_LEDCTL_LED0_MODE_SHIFT 0 +#define E1000_LEDCTL_LED0_IVRT 0x00000040 +#define E1000_LEDCTL_LED0_BLINK 0x00000080 + +#define E1000_LEDCTL_MODE_LED_ON 0xE +#define E1000_LEDCTL_MODE_LED_OFF 0xF + +/* Transmit Descriptor bit definitions */ +#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ +#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ +#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ +#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ +#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ +#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ +#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ +#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ +#define E1000_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */ +#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ +#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ +#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ +#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ +#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ +#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ +#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ +#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ +#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ +#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ +#define E1000_TXD_EXTCMD_TSTAMP 0x00000010 /* IEEE1588 Timestamp packet */ + +/* Transmit Control */ +#define E1000_TCTL_EN 0x00000002 /* enable Tx */ +#define E1000_TCTL_PSP 0x00000008 /* pad short packets */ +#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ +#define E1000_TCTL_COLD 0x003ff000 /* collision distance */ +#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ +#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ + +/* Transmit Arbitration Count */ +#define E1000_TARC0_ENABLE 0x00000400 /* Enable Tx Queue 0 */ + +/* SerDes Control */ +#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 +#define E1000_SCTL_ENABLE_SERDES_LOOPBACK 0x0410 + +/* Receive Checksum Control */ +#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ +#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ +#define E1000_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */ +#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ + +/* Header split receive */ +#define E1000_RFCTL_NFSW_DIS 0x00000040 +#define E1000_RFCTL_NFSR_DIS 0x00000080 +#define E1000_RFCTL_ACK_DIS 0x00001000 +#define E1000_RFCTL_EXTEN 0x00008000 +#define E1000_RFCTL_IPV6_EX_DIS 0x00010000 +#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 +#define E1000_RFCTL_LEF 0x00040000 + +/* Collision related configuration parameters */ +#define E1000_COLLISION_THRESHOLD 15 +#define E1000_CT_SHIFT 4 +#define E1000_COLLISION_DISTANCE 63 +#define E1000_COLD_SHIFT 12 + +/* Default values for the transmit IPG register */ +#define DEFAULT_82543_TIPG_IPGT_FIBER 9 +#define DEFAULT_82543_TIPG_IPGT_COPPER 8 + +#define E1000_TIPG_IPGT_MASK 0x000003FF + +#define DEFAULT_82543_TIPG_IPGR1 8 +#define E1000_TIPG_IPGR1_SHIFT 10 + +#define DEFAULT_82543_TIPG_IPGR2 6 +#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7 +#define E1000_TIPG_IPGR2_SHIFT 20 + +/* Ethertype field values */ +#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ + +#define ETHERNET_FCS_SIZE 4 +#define MAX_JUMBO_FRAME_SIZE 0x3F00 + +/* Extended Configuration Control and Size */ +#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 +#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008 +#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 +#define E1000_EXTCNF_CTRL_GATE_PHY_CFG 0x00000080 +#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000 +#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT 16 + +#define E1000_PHY_CTRL_D0A_LPLU 0x00000002 +#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004 +#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008 +#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040 + +#define E1000_KABGTXD_BGSQLBIAS 0x00050000 + +/* PBA constants */ +#define E1000_PBA_8K 0x0008 /* 8KB */ +#define E1000_PBA_10K 0x000A /* 10KB */ +#define E1000_PBA_12K 0x000C /* 12KB */ +#define E1000_PBA_14K 0x000E /* 14KB */ +#define E1000_PBA_16K 0x0010 /* 16KB */ +#define E1000_PBA_18K 0x0012 +#define E1000_PBA_20K 0x0014 +#define E1000_PBA_22K 0x0016 +#define E1000_PBA_24K 0x0018 +#define E1000_PBA_26K 0x001A +#define E1000_PBA_30K 0x001E +#define E1000_PBA_32K 0x0020 +#define E1000_PBA_34K 0x0022 +#define E1000_PBA_35K 0x0023 +#define E1000_PBA_38K 0x0026 +#define E1000_PBA_40K 0x0028 +#define E1000_PBA_48K 0x0030 /* 48KB */ +#define E1000_PBA_64K 0x0040 /* 64KB */ + +#define E1000_PBA_RXA_MASK 0xFFFF + +#define E1000_PBS_16K E1000_PBA_16K + +#define IFS_MAX 80 +#define IFS_MIN 40 +#define IFS_RATIO 4 +#define IFS_STEP 10 +#define MIN_NUM_XMITS 1000 + +/* SW Semaphore Register */ +#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ + +#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */ + +/* Interrupt Cause Read */ +#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ +#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ +#define E1000_ICR_LSC 0x00000004 /* Link Status Change */ +#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ +#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ +#define E1000_ICR_RXO 0x00000040 /* Rx overrun */ +#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ +#define E1000_ICR_VMMB 0x00000100 /* VM MB event */ +#define E1000_ICR_RXCFG 0x00000400 /* Rx /c/ ordered set */ +#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ +#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ +#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ +#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ +#define E1000_ICR_TXD_LOW 0x00008000 +#define E1000_ICR_MNG 0x00040000 /* Manageability event */ +#define E1000_ICR_TS 0x00080000 /* Time Sync Interrupt */ +#define E1000_ICR_DRSTA 0x40000000 /* Device Reset Asserted */ +/* If this bit asserted, the driver should claim the interrupt */ +#define E1000_ICR_INT_ASSERTED 0x80000000 +#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */ +#define E1000_ICR_FER 0x00400000 /* Fatal Error */ + +#define E1000_ICR_THS 0x00800000 /* ICR.THS: Thermal Sensor Event*/ +#define E1000_ICR_MDDET 0x10000000 /* Malicious Driver Detect */ + + +/* Extended Interrupt Cause Read */ +#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */ +#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */ +#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */ +#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */ +#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */ +#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */ +#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */ +#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */ +#define E1000_EICR_TCP_TIMER 0x40000000 /* TCP Timer */ +#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ +/* TCP Timer */ +#define E1000_TCPTIMER_KS 0x00000100 /* KickStart */ +#define E1000_TCPTIMER_COUNT_ENABLE 0x00000200 /* Count Enable */ +#define E1000_TCPTIMER_COUNT_FINISH 0x00000400 /* Count finish */ +#define E1000_TCPTIMER_LOOP 0x00000800 /* Loop */ + +/* This defines the bits that are set in the Interrupt Mask + * Set/Read Register. Each bit is documented below: + * o RXT0 = Receiver Timer Interrupt (ring 0) + * o TXDW = Transmit Descriptor Written Back + * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0) + * o RXSEQ = Receive Sequence Error + * o LSC = Link Status Change + */ +#define IMS_ENABLE_MASK ( \ + E1000_IMS_RXT0 | \ + E1000_IMS_TXDW | \ + E1000_IMS_RXDMT0 | \ + E1000_IMS_RXSEQ | \ + E1000_IMS_LSC) + +/* Interrupt Mask Set */ +#define E1000_IMS_TXDW E1000_ICR_TXDW /* Tx desc written back */ +#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ +#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */ +#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ +#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ +#define E1000_IMS_RXO E1000_ICR_RXO /* Rx overrun */ +#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ +#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW +#define E1000_IMS_TS E1000_ICR_TS /* Time Sync Interrupt */ +#define E1000_IMS_DRSTA E1000_ICR_DRSTA /* Device Reset Asserted */ +#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */ +#define E1000_IMS_FER E1000_ICR_FER /* Fatal Error */ + +#define E1000_IMS_THS E1000_ICR_THS /* ICR.TS: Thermal Sensor Event*/ +#define E1000_IMS_MDDET E1000_ICR_MDDET /* Malicious Driver Detect */ +/* Extended Interrupt Mask Set */ +#define E1000_EIMS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */ +#define E1000_EIMS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */ +#define E1000_EIMS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */ +#define E1000_EIMS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */ +#define E1000_EIMS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */ +#define E1000_EIMS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */ +#define E1000_EIMS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */ +#define E1000_EIMS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */ +#define E1000_EIMS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ +#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ + +/* Interrupt Cause Set */ +#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ +#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ + +/* Extended Interrupt Cause Set */ +#define E1000_EICS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */ +#define E1000_EICS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */ +#define E1000_EICS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */ +#define E1000_EICS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */ +#define E1000_EICS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */ +#define E1000_EICS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */ +#define E1000_EICS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */ +#define E1000_EICS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */ +#define E1000_EICS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ +#define E1000_EICS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ + +#define E1000_EITR_ITR_INT_MASK 0x0000FFFF +/* E1000_EITR_CNT_IGNR is only for 82576 and newer */ +#define E1000_EITR_CNT_IGNR 0x80000000 /* Don't reset counters on write */ +#define E1000_EITR_INTERVAL 0x00007FFC + +/* Transmit Descriptor Control */ +#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ +#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ +#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ +#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ +#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ +#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */ +/* Enable the counting of descriptors still to be processed. */ +#define E1000_TXDCTL_COUNT_DESC 0x00400000 + +/* Flow Control Constants */ +#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 +#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 +#define FLOW_CONTROL_TYPE 0x8808 + +/* 802.1q VLAN Packet Size */ +#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ +#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ + +/* Receive Address + * Number of high/low register pairs in the RAR. The RAR (Receive Address + * Registers) holds the directed and multicast addresses that we monitor. + * Technically, we have 16 spots. However, we reserve one of these spots + * (RAR[15]) for our directed address used by controllers with + * manageability enabled, allowing us room for 15 multicast addresses. + */ +#define E1000_RAR_ENTRIES 15 +#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ +#define E1000_RAL_MAC_ADDR_LEN 4 +#define E1000_RAH_MAC_ADDR_LEN 2 +#define E1000_RAH_QUEUE_MASK_82575 0x000C0000 +#define E1000_RAH_POOL_1 0x00040000 + +/* Error Codes */ +#define E1000_SUCCESS 0 +#define E1000_ERR_NVM 1 +#define E1000_ERR_PHY 2 +#define E1000_ERR_CONFIG 3 +#define E1000_ERR_PARAM 4 +#define E1000_ERR_MAC_INIT 5 +#define E1000_ERR_PHY_TYPE 6 +#define E1000_ERR_RESET 9 +#define E1000_ERR_MASTER_REQUESTS_PENDING 10 +#define E1000_ERR_HOST_INTERFACE_COMMAND 11 +#define E1000_BLK_PHY_RESET 12 +#define E1000_ERR_SWFW_SYNC 13 +#define E1000_NOT_IMPLEMENTED 14 +#define E1000_ERR_MBX 15 +#define E1000_ERR_INVALID_ARGUMENT 16 +#define E1000_ERR_NO_SPACE 17 +#define E1000_ERR_NVM_PBA_SECTION 18 +#define E1000_ERR_I2C 19 +#define E1000_ERR_INVM_VALUE_NOT_FOUND 20 + +/* Loop limit on how long we wait for auto-negotiation to complete */ +#define FIBER_LINK_UP_LIMIT 50 +#define COPPER_LINK_UP_LIMIT 10 +#define PHY_AUTO_NEG_LIMIT 45 +#define PHY_FORCE_LIMIT 20 +/* Number of 100 microseconds we wait for PCI Express master disable */ +#define MASTER_DISABLE_TIMEOUT 800 +/* Number of milliseconds we wait for PHY configuration done after MAC reset */ +#define PHY_CFG_TIMEOUT 100 +/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */ +#define MDIO_OWNERSHIP_TIMEOUT 10 +/* Number of milliseconds for NVM auto read done after MAC reset. */ +#define AUTO_READ_DONE_TIMEOUT 10 + +/* Flow Control */ +#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ +#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ +#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ + +/* Transmit Configuration Word */ +#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ +#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ +#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ +#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ +#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ + +/* Receive Configuration Word */ +#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ +#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ +#define E1000_RXCW_C 0x20000000 /* Receive config */ +#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ + +#define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ +#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */ + +#define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ +#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ +#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00 +#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02 +#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04 +#define E1000_TSYNCRXCTL_TYPE_ALL 0x08 +#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A +#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */ +#define E1000_TSYNCRXCTL_SYSCFI 0x00000020 /* Sys clock frequency */ + +#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK 0x000000FF +#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE 0x00 +#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE 0x01 +#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE 0x02 +#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03 +#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04 + +#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK 0x00000F00 +#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE 0x0000 +#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE 0x0100 +#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE 0x0200 +#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE 0x0300 +#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE 0x0800 +#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE 0x0900 +#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00 +#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE 0x0B00 +#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE 0x0C00 +#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE 0x0D00 + +#define E1000_TIMINCA_16NS_SHIFT 24 +#define E1000_TIMINCA_INCPERIOD_SHIFT 24 +#define E1000_TIMINCA_INCVALUE_MASK 0x00FFFFFF + +#define E1000_TSICR_TXTS 0x00000002 +#define E1000_TSIM_TXTS 0x00000002 +/* TUPLE Filtering Configuration */ +#define E1000_TTQF_DISABLE_MASK 0xF0008000 /* TTQF Disable Mask */ +#define E1000_TTQF_QUEUE_ENABLE 0x100 /* TTQF Queue Enable Bit */ +#define E1000_TTQF_PROTOCOL_MASK 0xFF /* TTQF Protocol Mask */ +/* TTQF TCP Bit, shift with E1000_TTQF_PROTOCOL SHIFT */ +#define E1000_TTQF_PROTOCOL_TCP 0x0 +/* TTQF UDP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */ +#define E1000_TTQF_PROTOCOL_UDP 0x1 +/* TTQF SCTP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */ +#define E1000_TTQF_PROTOCOL_SCTP 0x2 +#define E1000_TTQF_PROTOCOL_SHIFT 5 /* TTQF Protocol Shift */ +#define E1000_TTQF_QUEUE_SHIFT 16 /* TTQF Queue Shfit */ +#define E1000_TTQF_RX_QUEUE_MASK 0x70000 /* TTQF Queue Mask */ +#define E1000_TTQF_MASK_ENABLE 0x10000000 /* TTQF Mask Enable Bit */ +#define E1000_IMIR_CLEAR_MASK 0xF001FFFF /* IMIR Reg Clear Mask */ +#define E1000_IMIR_PORT_BYPASS 0x20000 /* IMIR Port Bypass Bit */ +#define E1000_IMIR_PRIORITY_SHIFT 29 /* IMIR Priority Shift */ +#define E1000_IMIREXT_CLEAR_MASK 0x7FFFF /* IMIREXT Reg Clear Mask */ + +#define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */ +#define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */ +#define E1000_MDICNFG_PHY_MASK 0x03E00000 +#define E1000_MDICNFG_PHY_SHIFT 21 + +#define E1000_MEDIA_PORT_COPPER 1 +#define E1000_MEDIA_PORT_OTHER 2 +#define E1000_M88E1112_AUTO_COPPER_SGMII 0x2 +#define E1000_M88E1112_AUTO_COPPER_BASEX 0x3 +#define E1000_M88E1112_STATUS_LINK 0x0004 /* Interface Link Bit */ +#define E1000_M88E1112_MAC_CTRL_1 0x10 +#define E1000_M88E1112_MAC_CTRL_1_MODE_MASK 0x0380 /* Mode Select */ +#define E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT 7 +#define E1000_M88E1112_PAGE_ADDR 0x16 +#define E1000_M88E1112_STATUS 0x01 + +#define E1000_THSTAT_LOW_EVENT 0x20000000 /* Low thermal threshold */ +#define E1000_THSTAT_MID_EVENT 0x00200000 /* Mid thermal threshold */ +#define E1000_THSTAT_HIGH_EVENT 0x00002000 /* High thermal threshold */ +#define E1000_THSTAT_PWR_DOWN 0x00000001 /* Power Down Event */ +#define E1000_THSTAT_LINK_THROTTLE 0x00000002 /* Link Spd Throttle Event */ + +/* I350 EEE defines */ +#define E1000_IPCNFG_EEE_1G_AN 0x00000008 /* IPCNFG EEE Ena 1G AN */ +#define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* IPCNFG EEE Ena 100M AN */ +#define E1000_EEER_TX_LPI_EN 0x00010000 /* EEER Tx LPI Enable */ +#define E1000_EEER_RX_LPI_EN 0x00020000 /* EEER Rx LPI Enable */ +#define E1000_EEER_LPI_FC 0x00040000 /* EEER Ena on Flow Cntrl */ +/* EEE status */ +#define E1000_EEER_EEE_NEG 0x20000000 /* EEE capability nego */ +#define E1000_EEER_RX_LPI_STATUS 0x40000000 /* Rx in LPI state */ +#define E1000_EEER_TX_LPI_STATUS 0x80000000 /* Tx in LPI state */ +#define E1000_EEE_LP_ADV_ADDR_I350 0x040F /* EEE LP Advertisement */ +#define E1000_M88E1543_PAGE_ADDR 0x16 /* Page Offset Register */ +#define E1000_M88E1543_EEE_CTRL_1 0x0 +#define E1000_M88E1543_EEE_CTRL_1_MS 0x0001 /* EEE Master/Slave */ +#define E1000_EEE_ADV_DEV_I354 7 +#define E1000_EEE_ADV_ADDR_I354 60 +#define E1000_EEE_ADV_100_SUPPORTED (1 << 1) /* 100BaseTx EEE Supported */ +#define E1000_EEE_ADV_1000_SUPPORTED (1 << 2) /* 1000BaseT EEE Supported */ +#define E1000_PCS_STATUS_DEV_I354 3 +#define E1000_PCS_STATUS_ADDR_I354 1 +#define E1000_PCS_STATUS_RX_LPI_RCVD 0x0400 +#define E1000_PCS_STATUS_TX_LPI_RCVD 0x0800 +#define E1000_EEE_SU_LPI_CLK_STP 0x00800000 /* EEE LPI Clock Stop */ +#define E1000_EEE_LP_ADV_DEV_I210 7 /* EEE LP Adv Device */ +#define E1000_EEE_LP_ADV_ADDR_I210 61 /* EEE LP Adv Register */ +/* PCI Express Control */ +#define E1000_GCR_RXD_NO_SNOOP 0x00000001 +#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002 +#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004 +#define E1000_GCR_TXD_NO_SNOOP 0x00000008 +#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010 +#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020 +#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000 +#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000 +#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000 +#define E1000_GCR_CAP_VER2 0x00040000 + +#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \ + E1000_GCR_RXDSCW_NO_SNOOP | \ + E1000_GCR_RXDSCR_NO_SNOOP | \ + E1000_GCR_TXD_NO_SNOOP | \ + E1000_GCR_TXDSCW_NO_SNOOP | \ + E1000_GCR_TXDSCR_NO_SNOOP) + +#define E1000_MMDAC_FUNC_DATA 0x4000 /* Data, no post increment */ + +/* mPHY address control and data registers */ +#define E1000_MPHY_ADDR_CTL 0x0024 /* Address Control Reg */ +#define E1000_MPHY_ADDR_CTL_OFFSET_MASK 0xFFFF0000 +#define E1000_MPHY_DATA 0x0E10 /* Data Register */ + +/* AFE CSR Offset for PCS CLK */ +#define E1000_MPHY_PCS_CLK_REG_OFFSET 0x0004 +/* Override for near end digital loopback. */ +#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10 + +/* PHY Control Register */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define MII_CR_SPEED_1000 0x0040 +#define MII_CR_SPEED_100 0x2000 +#define MII_CR_SPEED_10 0x0000 + +/* PHY Status Register */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ + +/* Autoneg Advertisement Register */ +#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ +#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ +#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ +#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ + +/* Link Partner Ability Register (Base Page) */ +#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ +#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP 10T Half Dplx Capable */ +#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP 10T Full Dplx Capable */ +#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP 100TX Half Dplx Capable */ +#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP 100TX Full Dplx Capable */ +#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ +#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ +#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asym Pause Direction bit */ +#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP detected Remote Fault */ +#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP rx'd link code word */ +#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ + +/* Autoneg Expansion Register */ +#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ +#define NWAY_ER_PAGE_RXD 0x0002 /* LP 10T Half Dplx Capable */ +#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP 10T Full Dplx Capable */ +#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP 100TX Half Dplx Capable */ +#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP 100TX Full Dplx Capable */ + +/* 1000BASE-T Control Register */ +#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ +#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ +/* 1=Repeater/switch device port 0=DTE device */ +#define CR_1000T_REPEATER_DTE 0x0400 +/* 1=Configure PHY as Master 0=Configure PHY as Slave */ +#define CR_1000T_MS_VALUE 0x0800 +/* 1=Master/Slave manual config value 0=Automatic Master/Slave config */ +#define CR_1000T_MS_ENABLE 0x1000 +#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ + +/* 1000BASE-T Status Register */ +#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle err since last rd */ +#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asym pause direction bit */ +#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local Tx Master, 0=Slave */ +#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ + +#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 + +/* PHY 1000 MII Register/Bit Definitions */ +/* PHY Registers defined by IEEE */ +#define PHY_CONTROL 0x00 /* Control Register */ +#define PHY_STATUS 0x01 /* Status Register */ +#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ +#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ +#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ +#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ +#define PHY_NEXT_PAGE_TX 0x07 /* Next Page Tx */ +#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ +#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ +#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ + +#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */ + +/* NVM Control */ +#define E1000_EECD_SK 0x00000001 /* NVM Clock */ +#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */ +#define E1000_EECD_DI 0x00000004 /* NVM Data In */ +#define E1000_EECD_DO 0x00000008 /* NVM Data Out */ +#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */ +#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */ +#define E1000_EECD_PRES 0x00000100 /* NVM Present */ +#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */ +#define E1000_EECD_BLOCKED 0x00008000 /* Bit banging access blocked flag */ +#define E1000_EECD_ABORT 0x00010000 /* NVM operation aborted flag */ +#define E1000_EECD_TIMEOUT 0x00020000 /* NVM read operation timeout flag */ +#define E1000_EECD_ERROR_CLR 0x00040000 /* NVM error status clear bit */ +/* NVM Addressing bits based on type 0=small, 1=large */ +#define E1000_EECD_ADDR_BITS 0x00000400 +#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */ +#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */ +#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */ +#define E1000_EECD_SIZE_EX_SHIFT 11 +#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ +#define E1000_EECD_AUPDEN 0x00100000 /* Ena Auto FLASH update */ +#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ +#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES) +#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */ +#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done */ +#define E1000_EECD_FLASH_DETECTED_I210 0x00080000 /* FLASH detected */ +#define E1000_EECD_SEC1VAL_I210 0x02000000 /* Sector One Valid */ +#define E1000_FLUDONE_ATTEMPTS 20000 +#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */ +#define E1000_I210_FIFO_SEL_RX 0x00 +#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i)) +#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0) +#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06 +#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01 + +#define E1000_I210_FLASH_SECTOR_SIZE 0x1000 /* 4KB FLASH sector unit size */ +/* Secure FLASH mode requires removing MSb */ +#define E1000_I210_FW_PTR_MASK 0x7FFF +/* Firmware code revision field word offset*/ +#define E1000_I210_FW_VER_OFFSET 328 + +#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write regs */ +#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ +#define E1000_NVM_RW_REG_START 1 /* Start operation */ +#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */ +#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */ +#define E1000_FLASH_UPDATES 2000 + +/* NVM Word Offsets */ +#define NVM_COMPAT 0x0003 +#define NVM_ID_LED_SETTINGS 0x0004 +#define NVM_VERSION 0x0005 +#define E1000_I210_NVM_FW_MODULE_PTR 0x0010 +#define E1000_I350_NVM_FW_MODULE_PTR 0x0051 +#define NVM_FUTURE_INIT_WORD1 0x0019 +#define NVM_ETRACK_WORD 0x0042 +#define NVM_ETRACK_HIWORD 0x0043 +#define NVM_COMB_VER_OFF 0x0083 +#define NVM_COMB_VER_PTR 0x003d + +/* NVM version defines */ +#define NVM_MAJOR_MASK 0xF000 +#define NVM_MINOR_MASK 0x0FF0 +#define NVM_IMAGE_ID_MASK 0x000F +#define NVM_COMB_VER_MASK 0x00FF +#define NVM_MAJOR_SHIFT 12 +#define NVM_MINOR_SHIFT 4 +#define NVM_COMB_VER_SHFT 8 +#define NVM_VER_INVALID 0xFFFF +#define NVM_ETRACK_SHIFT 16 +#define NVM_ETRACK_VALID 0x8000 +#define NVM_NEW_DEC_MASK 0x0F00 +#define NVM_HEX_CONV 16 +#define NVM_HEX_TENS 10 + +/* FW version defines */ +/* Offset of "Loader patch ptr" in Firmware Header */ +#define E1000_I350_NVM_FW_LOADER_PATCH_PTR_OFFSET 0x01 +/* Patch generation hour & minutes */ +#define E1000_I350_NVM_FW_VER_WORD1_OFFSET 0x04 +/* Patch generation month & day */ +#define E1000_I350_NVM_FW_VER_WORD2_OFFSET 0x05 +/* Patch generation year */ +#define E1000_I350_NVM_FW_VER_WORD3_OFFSET 0x06 +/* Patch major & minor numbers */ +#define E1000_I350_NVM_FW_VER_WORD4_OFFSET 0x07 + +#define NVM_MAC_ADDR 0x0000 +#define NVM_SUB_DEV_ID 0x000B +#define NVM_SUB_VEN_ID 0x000C +#define NVM_DEV_ID 0x000D +#define NVM_VEN_ID 0x000E +#define NVM_INIT_CTRL_2 0x000F +#define NVM_INIT_CTRL_4 0x0013 +#define NVM_LED_1_CFG 0x001C +#define NVM_LED_0_2_CFG 0x001F + +#define NVM_COMPAT_VALID_CSUM 0x0001 +#define NVM_FUTURE_INIT_WORD1_VALID_CSUM 0x0040 + +#define NVM_ETS_CFG 0x003E +#define NVM_ETS_LTHRES_DELTA_MASK 0x07C0 +#define NVM_ETS_LTHRES_DELTA_SHIFT 6 +#define NVM_ETS_TYPE_MASK 0x0038 +#define NVM_ETS_TYPE_SHIFT 3 +#define NVM_ETS_TYPE_EMC 0x000 +#define NVM_ETS_NUM_SENSORS_MASK 0x0007 +#define NVM_ETS_DATA_LOC_MASK 0x3C00 +#define NVM_ETS_DATA_LOC_SHIFT 10 +#define NVM_ETS_DATA_INDEX_MASK 0x0300 +#define NVM_ETS_DATA_INDEX_SHIFT 8 +#define NVM_ETS_DATA_HTHRESH_MASK 0x00FF +#define NVM_INIT_CONTROL2_REG 0x000F +#define NVM_INIT_CONTROL3_PORT_B 0x0014 +#define NVM_INIT_3GIO_3 0x001A +#define NVM_SWDEF_PINS_CTRL_PORT_0 0x0020 +#define NVM_INIT_CONTROL3_PORT_A 0x0024 +#define NVM_CFG 0x0012 +#define NVM_ALT_MAC_ADDR_PTR 0x0037 +#define NVM_CHECKSUM_REG 0x003F +#define NVM_COMPATIBILITY_REG_3 0x0003 +#define NVM_COMPATIBILITY_BIT_MASK 0x8000 + +#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */ +#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */ +#define E1000_NVM_CFG_DONE_PORT_2 0x100000 /* ...for third port */ +#define E1000_NVM_CFG_DONE_PORT_3 0x200000 /* ...for fourth port */ + +#define NVM_82580_LAN_FUNC_OFFSET(a) ((a) ? (0x40 + (0x40 * (a))) : 0) + +/* Mask bits for fields in Word 0x24 of the NVM */ +#define NVM_WORD24_COM_MDIO 0x0008 /* MDIO interface shared */ +#define NVM_WORD24_EXT_MDIO 0x0004 /* MDIO accesses routed extrnl */ +/* Offset of Link Mode bits for 82575/82576 */ +#define NVM_WORD24_LNK_MODE_OFFSET 8 +/* Offset of Link Mode bits for 82580 up */ +#define NVM_WORD24_82580_LNK_MODE_OFFSET 4 + + +/* Mask bits for fields in Word 0x0f of the NVM */ +#define NVM_WORD0F_PAUSE_MASK 0x3000 +#define NVM_WORD0F_PAUSE 0x1000 +#define NVM_WORD0F_ASM_DIR 0x2000 + +/* Mask bits for fields in Word 0x1a of the NVM */ +#define NVM_WORD1A_ASPM_MASK 0x000C + +/* Mask bits for fields in Word 0x03 of the EEPROM */ +#define NVM_COMPAT_LOM 0x0800 + +/* length of string needed to store PBA number */ +#define E1000_PBANUM_LENGTH 11 + +/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */ +#define NVM_SUM 0xBABA + +/* PBA (printed board assembly) number words */ +#define NVM_PBA_OFFSET_0 8 +#define NVM_PBA_OFFSET_1 9 +#define NVM_PBA_PTR_GUARD 0xFAFA +#define NVM_RESERVED_WORD 0xFFFF +#define NVM_WORD_SIZE_BASE_SHIFT 6 + +/* NVM Commands - SPI */ +#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ +#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */ +#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */ +#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ +#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */ +#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */ + +/* SPI NVM Status Register */ +#define NVM_STATUS_RDY_SPI 0x01 + +/* Word definitions for ID LED Settings */ +#define ID_LED_RESERVED_0000 0x0000 +#define ID_LED_RESERVED_FFFF 0xFFFF +#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ + (ID_LED_OFF1_OFF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_DEF1_DEF2)) +#define ID_LED_DEF1_DEF2 0x1 +#define ID_LED_DEF1_ON2 0x2 +#define ID_LED_DEF1_OFF2 0x3 +#define ID_LED_ON1_DEF2 0x4 +#define ID_LED_ON1_ON2 0x5 +#define ID_LED_ON1_OFF2 0x6 +#define ID_LED_OFF1_DEF2 0x7 +#define ID_LED_OFF1_ON2 0x8 +#define ID_LED_OFF1_OFF2 0x9 + +#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF +#define IGP_ACTIVITY_LED_ENABLE 0x0300 +#define IGP_LED3_MODE 0x07000000 + +/* PCI/PCI-X/PCI-EX Config space */ +#define PCI_HEADER_TYPE_REGISTER 0x0E +#define PCIE_LINK_STATUS 0x12 +#define PCIE_DEVICE_CONTROL2 0x28 + +#define PCI_HEADER_TYPE_MULTIFUNC 0x80 +#define PCIE_LINK_WIDTH_MASK 0x3F0 +#define PCIE_LINK_WIDTH_SHIFT 4 +#define PCIE_LINK_SPEED_MASK 0x0F +#define PCIE_LINK_SPEED_2500 0x01 +#define PCIE_LINK_SPEED_5000 0x02 +#define PCIE_DEVICE_CONTROL2_16ms 0x0005 + +#ifndef ETH_ADDR_LEN +#define ETH_ADDR_LEN 6 +#endif + +#define PHY_REVISION_MASK 0xFFFFFFF0 +#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ +#define MAX_PHY_MULTI_PAGE_REG 0xF + +/* Bit definitions for valid PHY IDs. + * I = Integrated + * E = External + */ +#define M88E1000_E_PHY_ID 0x01410C50 +#define M88E1000_I_PHY_ID 0x01410C30 +#define M88E1011_I_PHY_ID 0x01410C20 +#define IGP01E1000_I_PHY_ID 0x02A80380 +#define M88E1111_I_PHY_ID 0x01410CC0 +#define M88E1543_E_PHY_ID 0x01410EA0 +#define M88E1112_E_PHY_ID 0x01410C90 +#define I347AT4_E_PHY_ID 0x01410DC0 +#define M88E1340M_E_PHY_ID 0x01410DF0 +#define GG82563_E_PHY_ID 0x01410CA0 +#define IGP03E1000_E_PHY_ID 0x02A80390 +#define IFE_E_PHY_ID 0x02A80330 +#define IFE_PLUS_E_PHY_ID 0x02A80320 +#define IFE_C_E_PHY_ID 0x02A80310 +#define I82580_I_PHY_ID 0x015403A0 +#define I350_I_PHY_ID 0x015403B0 +#define I210_I_PHY_ID 0x01410C00 +#define IGP04E1000_E_PHY_ID 0x02A80391 +#define M88_VENDOR 0x0141 + +/* M88E1000 Specific Registers */ +#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Reg */ +#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Reg */ +#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Cntrl */ +#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ + +#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for pg number setting */ +#define M88E1000_PHY_GEN_CONTROL 0x1E /* meaning depends on reg 29 */ + +/* M88E1000 PHY Specific Control Register */ +#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reverse enabled */ +/* MDI Crossover Mode bits 6:5 Manual MDI configuration */ +#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 +#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ +/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */ +#define M88E1000_PSCR_AUTO_X_1000T 0x0040 +/* Auto crossover enabled all speeds */ +#define M88E1000_PSCR_AUTO_X_MODE 0x0060 +#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Tx */ + +/* M88E1000 PHY Specific Status Register */ +#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ +#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ +#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ +/* 0 = <50M + * 1 = 50-80M + * 2 = 80-110M + * 3 = 110-140M + * 4 = >140M + */ +#define M88E1000_PSSR_CABLE_LENGTH 0x0380 +#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */ +#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ +#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ + +#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 + +/* Number of times we will attempt to autonegotiate before downshifting if we + * are the master + */ +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 +/* Number of times we will attempt to autonegotiate before downshifting if we + * are the slave + */ +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 +#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ + +/* Intel I347AT4 Registers */ +#define I347AT4_PCDL 0x10 /* PHY Cable Diagnostics Length */ +#define I347AT4_PCDC 0x15 /* PHY Cable Diagnostics Control */ +#define I347AT4_PAGE_SELECT 0x16 + +/* I347AT4 Extended PHY Specific Control Register */ + +/* Number of times we will attempt to autonegotiate before downshifting if we + * are the master + */ +#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800 +#define I347AT4_PSCR_DOWNSHIFT_MASK 0x7000 +#define I347AT4_PSCR_DOWNSHIFT_1X 0x0000 +#define I347AT4_PSCR_DOWNSHIFT_2X 0x1000 +#define I347AT4_PSCR_DOWNSHIFT_3X 0x2000 +#define I347AT4_PSCR_DOWNSHIFT_4X 0x3000 +#define I347AT4_PSCR_DOWNSHIFT_5X 0x4000 +#define I347AT4_PSCR_DOWNSHIFT_6X 0x5000 +#define I347AT4_PSCR_DOWNSHIFT_7X 0x6000 +#define I347AT4_PSCR_DOWNSHIFT_8X 0x7000 + +/* I347AT4 PHY Cable Diagnostics Control */ +#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */ + +/* M88E1112 only registers */ +#define M88E1112_VCT_DSP_DISTANCE 0x001A + +/* M88EC018 Rev 2 specific DownShift settings */ +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 + +/* Bits... + * 15-5: page + * 4-0: register offset + */ +#define GG82563_PAGE_SHIFT 5 +#define GG82563_REG(page, reg) \ + (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) +#define GG82563_MIN_ALT_REG 30 + +/* GG82563 Specific Registers */ +#define GG82563_PHY_SPEC_CTRL GG82563_REG(0, 16) /* PHY Spec Cntrl */ +#define GG82563_PHY_PAGE_SELECT GG82563_REG(0, 22) /* Page Select */ +#define GG82563_PHY_SPEC_CTRL_2 GG82563_REG(0, 26) /* PHY Spec Cntrl2 */ +#define GG82563_PHY_PAGE_SELECT_ALT GG82563_REG(0, 29) /* Alt Page Select */ + +/* MAC Specific Control Register */ +#define GG82563_PHY_MAC_SPEC_CTRL GG82563_REG(2, 21) + +#define GG82563_PHY_DSP_DISTANCE GG82563_REG(5, 26) /* DSP Distance */ + +/* Page 193 - Port Control Registers */ +/* Kumeran Mode Control */ +#define GG82563_PHY_KMRN_MODE_CTRL GG82563_REG(193, 16) +#define GG82563_PHY_PWR_MGMT_CTRL GG82563_REG(193, 20) /* Pwr Mgt Ctrl */ + +/* Page 194 - KMRN Registers */ +#define GG82563_PHY_INBAND_CTRL GG82563_REG(194, 18) /* Inband Ctrl */ + +/* MDI Control */ +#define E1000_MDIC_REG_MASK 0x001F0000 +#define E1000_MDIC_REG_SHIFT 16 +#define E1000_MDIC_PHY_MASK 0x03E00000 +#define E1000_MDIC_PHY_SHIFT 21 +#define E1000_MDIC_OP_WRITE 0x04000000 +#define E1000_MDIC_OP_READ 0x08000000 +#define E1000_MDIC_READY 0x10000000 +#define E1000_MDIC_ERROR 0x40000000 +#define E1000_MDIC_DEST 0x80000000 + +/* SerDes Control */ +#define E1000_GEN_CTL_READY 0x80000000 +#define E1000_GEN_CTL_ADDRESS_SHIFT 8 +#define E1000_GEN_POLL_TIMEOUT 640 + +/* LinkSec register fields */ +#define E1000_LSECTXCAP_SUM_MASK 0x00FF0000 +#define E1000_LSECTXCAP_SUM_SHIFT 16 +#define E1000_LSECRXCAP_SUM_MASK 0x00FF0000 +#define E1000_LSECRXCAP_SUM_SHIFT 16 + +#define E1000_LSECTXCTRL_EN_MASK 0x00000003 +#define E1000_LSECTXCTRL_DISABLE 0x0 +#define E1000_LSECTXCTRL_AUTH 0x1 +#define E1000_LSECTXCTRL_AUTH_ENCRYPT 0x2 +#define E1000_LSECTXCTRL_AISCI 0x00000020 +#define E1000_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00 +#define E1000_LSECTXCTRL_RSV_MASK 0x000000D8 + +#define E1000_LSECRXCTRL_EN_MASK 0x0000000C +#define E1000_LSECRXCTRL_EN_SHIFT 2 +#define E1000_LSECRXCTRL_DISABLE 0x0 +#define E1000_LSECRXCTRL_CHECK 0x1 +#define E1000_LSECRXCTRL_STRICT 0x2 +#define E1000_LSECRXCTRL_DROP 0x3 +#define E1000_LSECRXCTRL_PLSH 0x00000040 +#define E1000_LSECRXCTRL_RP 0x00000080 +#define E1000_LSECRXCTRL_RSV_MASK 0xFFFFFF33 + +/* Tx Rate-Scheduler Config fields */ +#define E1000_RTTBCNRC_RS_ENA 0x80000000 +#define E1000_RTTBCNRC_RF_DEC_MASK 0x00003FFF +#define E1000_RTTBCNRC_RF_INT_SHIFT 14 +#define E1000_RTTBCNRC_RF_INT_MASK \ + (E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT) + +/* DMA Coalescing register fields */ +/* DMA Coalescing Watchdog Timer */ +#define E1000_DMACR_DMACWT_MASK 0x00003FFF +/* DMA Coalescing Rx Threshold */ +#define E1000_DMACR_DMACTHR_MASK 0x00FF0000 +#define E1000_DMACR_DMACTHR_SHIFT 16 +/* Lx when no PCIe transactions */ +#define E1000_DMACR_DMAC_LX_MASK 0x30000000 +#define E1000_DMACR_DMAC_LX_SHIFT 28 +#define E1000_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */ +/* DMA Coalescing BMC-to-OS Watchdog Enable */ +#define E1000_DMACR_DC_BMC2OSW_EN 0x00008000 + +/* DMA Coalescing Transmit Threshold */ +#define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF + +#define E1000_DMCTLX_TTLX_MASK 0x00000FFF /* Time to LX request */ + +/* Rx Traffic Rate Threshold */ +#define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF +/* Rx packet rate in current window */ +#define E1000_DMCRTRH_LRPRCW 0x80000000 + +/* DMA Coal Rx Traffic Current Count */ +#define E1000_DMCCNT_CCOUNT_MASK 0x01FFFFFF + +/* Flow ctrl Rx Threshold High val */ +#define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 +#define E1000_FCRTC_RTH_COAL_SHIFT 4 +/* Lx power decision based on DMA coal */ +#define E1000_PCIEMISC_LX_DECISION 0x00000080 + +#define E1000_RXPBS_CFG_TS_EN 0x80000000 /* Timestamp in Rx buffer */ +#define E1000_RXPBS_SIZE_I210_MASK 0x0000003F /* Rx packet buffer size */ +#define E1000_TXPB0S_SIZE_I210_MASK 0x0000003F /* Tx packet buffer 0 size */ + +/* Proxy Filter Control */ +#define E1000_PROXYFC_D0 0x00000001 /* Enable offload in D0 */ +#define E1000_PROXYFC_EX 0x00000004 /* Directed exact proxy */ +#define E1000_PROXYFC_MC 0x00000008 /* Directed MC Proxy */ +#define E1000_PROXYFC_BC 0x00000010 /* Broadcast Proxy Enable */ +#define E1000_PROXYFC_ARP_DIRECTED 0x00000020 /* Directed ARP Proxy Ena */ +#define E1000_PROXYFC_IPV4 0x00000040 /* Directed IPv4 Enable */ +#define E1000_PROXYFC_IPV6 0x00000080 /* Directed IPv6 Enable */ +#define E1000_PROXYFC_NS 0x00000200 /* IPv6 Neighbor Solicitation */ +#define E1000_PROXYFC_ARP 0x00000800 /* ARP Request Proxy Ena */ +/* Proxy Status */ +#define E1000_PROXYS_CLEAR 0xFFFFFFFF /* Clear */ + +/* Firmware Status */ +#define E1000_FWSTS_FWRI 0x80000000 /* FW Reset Indication */ +/* VF Control */ +#define E1000_VTCTRL_RST 0x04000000 /* Reset VF */ + +#define E1000_STATUS_LAN_ID_MASK 0x00000000C /* Mask for Lan ID field */ +/* Lan ID bit field offset in status register */ +#define E1000_STATUS_LAN_ID_OFFSET 2 +#define E1000_VFTA_ENTRIES 128 +#ifndef E1000_UNUSEDARG +#define E1000_UNUSEDARG +#endif /* E1000_UNUSEDARG */ +#endif /* _E1000_DEFINES_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_hw.h b/kernel/linux/kni/ethtool/igb/e1000_hw.h new file mode 100644 index 00000000..ed43ef5a --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_hw.h @@ -0,0 +1,778 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_HW_H_ +#define _E1000_HW_H_ + +#include "e1000_osdep.h" +#include "e1000_regs.h" +#include "e1000_defines.h" + +struct e1000_hw; + +#define E1000_DEV_ID_82576 0x10C9 +#define E1000_DEV_ID_82576_FIBER 0x10E6 +#define E1000_DEV_ID_82576_SERDES 0x10E7 +#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 +#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526 +#define E1000_DEV_ID_82576_NS 0x150A +#define E1000_DEV_ID_82576_NS_SERDES 0x1518 +#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D +#define E1000_DEV_ID_82575EB_COPPER 0x10A7 +#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 +#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 +#define E1000_DEV_ID_82580_COPPER 0x150E +#define E1000_DEV_ID_82580_FIBER 0x150F +#define E1000_DEV_ID_82580_SERDES 0x1510 +#define E1000_DEV_ID_82580_SGMII 0x1511 +#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516 +#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527 +#define E1000_DEV_ID_I350_COPPER 0x1521 +#define E1000_DEV_ID_I350_FIBER 0x1522 +#define E1000_DEV_ID_I350_SERDES 0x1523 +#define E1000_DEV_ID_I350_SGMII 0x1524 +#define E1000_DEV_ID_I350_DA4 0x1546 +#define E1000_DEV_ID_I210_COPPER 0x1533 +#define E1000_DEV_ID_I210_COPPER_OEM1 0x1534 +#define E1000_DEV_ID_I210_COPPER_IT 0x1535 +#define E1000_DEV_ID_I210_FIBER 0x1536 +#define E1000_DEV_ID_I210_SERDES 0x1537 +#define E1000_DEV_ID_I210_SGMII 0x1538 +#define E1000_DEV_ID_I210_COPPER_FLASHLESS 0x157B +#define E1000_DEV_ID_I210_SERDES_FLASHLESS 0x157C +#define E1000_DEV_ID_I211_COPPER 0x1539 +#define E1000_DEV_ID_I354_BACKPLANE_1GBPS 0x1F40 +#define E1000_DEV_ID_I354_SGMII 0x1F41 +#define E1000_DEV_ID_I354_BACKPLANE_2_5GBPS 0x1F45 +#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438 +#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A +#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C +#define E1000_DEV_ID_DH89XXCC_SFP 0x0440 + +#define E1000_REVISION_0 0 +#define E1000_REVISION_1 1 +#define E1000_REVISION_2 2 +#define E1000_REVISION_3 3 +#define E1000_REVISION_4 4 + +#define E1000_FUNC_0 0 +#define E1000_FUNC_1 1 +#define E1000_FUNC_2 2 +#define E1000_FUNC_3 3 + +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2 6 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3 9 + +enum e1000_mac_type { + e1000_undefined = 0, + e1000_82575, + e1000_82576, + e1000_82580, + e1000_i350, + e1000_i354, + e1000_i210, + e1000_i211, + e1000_num_macs /* List is 1-based, so subtract 1 for true count. */ +}; + +enum e1000_media_type { + e1000_media_type_unknown = 0, + e1000_media_type_copper = 1, + e1000_media_type_fiber = 2, + e1000_media_type_internal_serdes = 3, + e1000_num_media_types +}; + +enum e1000_nvm_type { + e1000_nvm_unknown = 0, + e1000_nvm_none, + e1000_nvm_eeprom_spi, + e1000_nvm_flash_hw, + e1000_nvm_invm, + e1000_nvm_flash_sw +}; + +enum e1000_nvm_override { + e1000_nvm_override_none = 0, + e1000_nvm_override_spi_small, + e1000_nvm_override_spi_large, +}; + +enum e1000_phy_type { + e1000_phy_unknown = 0, + e1000_phy_none, + e1000_phy_m88, + e1000_phy_igp, + e1000_phy_igp_2, + e1000_phy_gg82563, + e1000_phy_igp_3, + e1000_phy_ife, + e1000_phy_82580, + e1000_phy_vf, + e1000_phy_i210, +}; + +enum e1000_bus_type { + e1000_bus_type_unknown = 0, + e1000_bus_type_pci, + e1000_bus_type_pcix, + e1000_bus_type_pci_express, + e1000_bus_type_reserved +}; + +enum e1000_bus_speed { + e1000_bus_speed_unknown = 0, + e1000_bus_speed_33, + e1000_bus_speed_66, + e1000_bus_speed_100, + e1000_bus_speed_120, + e1000_bus_speed_133, + e1000_bus_speed_2500, + e1000_bus_speed_5000, + e1000_bus_speed_reserved +}; + +enum e1000_bus_width { + e1000_bus_width_unknown = 0, + e1000_bus_width_pcie_x1, + e1000_bus_width_pcie_x2, + e1000_bus_width_pcie_x4 = 4, + e1000_bus_width_pcie_x8 = 8, + e1000_bus_width_32, + e1000_bus_width_64, + e1000_bus_width_reserved +}; + +enum e1000_1000t_rx_status { + e1000_1000t_rx_status_not_ok = 0, + e1000_1000t_rx_status_ok, + e1000_1000t_rx_status_undefined = 0xFF +}; + +enum e1000_rev_polarity { + e1000_rev_polarity_normal = 0, + e1000_rev_polarity_reversed, + e1000_rev_polarity_undefined = 0xFF +}; + +enum e1000_fc_mode { + e1000_fc_none = 0, + e1000_fc_rx_pause, + e1000_fc_tx_pause, + e1000_fc_full, + e1000_fc_default = 0xFF +}; + +enum e1000_ms_type { + e1000_ms_hw_default = 0, + e1000_ms_force_master, + e1000_ms_force_slave, + e1000_ms_auto +}; + +enum e1000_smart_speed { + e1000_smart_speed_default = 0, + e1000_smart_speed_on, + e1000_smart_speed_off +}; + +enum e1000_serdes_link_state { + e1000_serdes_link_down = 0, + e1000_serdes_link_autoneg_progress, + e1000_serdes_link_autoneg_complete, + e1000_serdes_link_forced_up +}; + +#ifndef __le16 +#define __le16 u16 +#endif +#ifndef __le32 +#define __le32 u32 +#endif +#ifndef __le64 +#define __le64 u64 +#endif +/* Receive Descriptor */ +struct e1000_rx_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + __le16 length; /* Length of data DMAed into data buffer */ + __le16 csum; /* Packet checksum */ + u8 status; /* Descriptor status */ + u8 errors; /* Descriptor Errors */ + __le16 special; +}; + +/* Receive Descriptor - Extended */ +union e1000_rx_desc_extended { + struct { + __le64 buffer_addr; + __le64 reserved; + } read; + struct { + struct { + __le32 mrq; /* Multiple Rx Queues */ + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length; + __le16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define MAX_PS_BUFFERS 4 + +/* Number of packet split data buffers (not including the header buffer) */ +#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1) + +/* Receive Descriptor - Packet Split */ +union e1000_rx_desc_packet_split { + struct { + /* one buffer for protocol header(s), three data buffers */ + __le64 buffer_addr[MAX_PS_BUFFERS]; + } read; + struct { + struct { + __le32 mrq; /* Multiple Rx Queues */ + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length0; /* length of buffer 0 */ + __le16 vlan; /* VLAN tag */ + } middle; + struct { + __le16 header_status; + /* length of buffers 1-3 */ + __le16 length[PS_PAGE_BUFFERS]; + } upper; + __le64 reserved; + } wb; /* writeback */ +}; + +/* Transmit Descriptor */ +struct e1000_tx_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + union { + __le32 data; + struct { + __le16 length; /* Data buffer length */ + u8 cso; /* Checksum offset */ + u8 cmd; /* Descriptor control */ + } flags; + } lower; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 css; /* Checksum start */ + __le16 special; + } fields; + } upper; +}; + +/* Offload Context Descriptor */ +struct e1000_context_desc { + union { + __le32 ip_config; + struct { + u8 ipcss; /* IP checksum start */ + u8 ipcso; /* IP checksum offset */ + __le16 ipcse; /* IP checksum end */ + } ip_fields; + } lower_setup; + union { + __le32 tcp_config; + struct { + u8 tucss; /* TCP checksum start */ + u8 tucso; /* TCP checksum offset */ + __le16 tucse; /* TCP checksum end */ + } tcp_fields; + } upper_setup; + __le32 cmd_and_length; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 hdr_len; /* Header length */ + __le16 mss; /* Maximum segment size */ + } fields; + } tcp_seg_setup; +}; + +/* Offload data descriptor */ +struct e1000_data_desc { + __le64 buffer_addr; /* Address of the descriptor's buffer address */ + union { + __le32 data; + struct { + __le16 length; /* Data buffer length */ + u8 typ_len_ext; + u8 cmd; + } flags; + } lower; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 popts; /* Packet Options */ + __le16 special; + } fields; + } upper; +}; + +/* Statistics counters collected by the MAC */ +struct e1000_hw_stats { + u64 crcerrs; + u64 algnerrc; + u64 symerrs; + u64 rxerrc; + u64 mpc; + u64 scc; + u64 ecol; + u64 mcc; + u64 latecol; + u64 colc; + u64 dc; + u64 tncrs; + u64 sec; + u64 cexterr; + u64 rlec; + u64 xonrxc; + u64 xontxc; + u64 xoffrxc; + u64 xofftxc; + u64 fcruc; + u64 prc64; + u64 prc127; + u64 prc255; + u64 prc511; + u64 prc1023; + u64 prc1522; + u64 gprc; + u64 bprc; + u64 mprc; + u64 gptc; + u64 gorc; + u64 gotc; + u64 rnbc; + u64 ruc; + u64 rfc; + u64 roc; + u64 rjc; + u64 mgprc; + u64 mgpdc; + u64 mgptc; + u64 tor; + u64 tot; + u64 tpr; + u64 tpt; + u64 ptc64; + u64 ptc127; + u64 ptc255; + u64 ptc511; + u64 ptc1023; + u64 ptc1522; + u64 mptc; + u64 bptc; + u64 tsctc; + u64 tsctfc; + u64 iac; + u64 icrxptc; + u64 icrxatc; + u64 ictxptc; + u64 ictxatc; + u64 ictxqec; + u64 ictxqmtc; + u64 icrxdmtc; + u64 icrxoc; + u64 cbtmpc; + u64 htdpmc; + u64 cbrdpc; + u64 cbrmpc; + u64 rpthc; + u64 hgptc; + u64 htcbdpc; + u64 hgorc; + u64 hgotc; + u64 lenerrs; + u64 scvpc; + u64 hrmpc; + u64 doosync; + u64 o2bgptc; + u64 o2bspc; + u64 b2ospc; + u64 b2ogprc; +}; + + +struct e1000_phy_stats { + u32 idle_errors; + u32 receive_errors; +}; + +struct e1000_host_mng_dhcp_cookie { + u32 signature; + u8 status; + u8 reserved0; + u16 vlan_id; + u32 reserved1; + u16 reserved2; + u8 reserved3; + u8 checksum; +}; + +/* Host Interface "Rev 1" */ +struct e1000_host_command_header { + u8 command_id; + u8 command_length; + u8 command_options; + u8 checksum; +}; + +#define E1000_HI_MAX_DATA_LENGTH 252 +struct e1000_host_command_info { + struct e1000_host_command_header command_header; + u8 command_data[E1000_HI_MAX_DATA_LENGTH]; +}; + +/* Host Interface "Rev 2" */ +struct e1000_host_mng_command_header { + u8 command_id; + u8 checksum; + u16 reserved1; + u16 reserved2; + u16 command_length; +}; + +#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 +struct e1000_host_mng_command_info { + struct e1000_host_mng_command_header command_header; + u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; +}; + +#include "e1000_mac.h" +#include "e1000_phy.h" +#include "e1000_nvm.h" +#include "e1000_manage.h" +#include "e1000_mbx.h" + +/* Function pointers for the MAC. */ +struct e1000_mac_operations { + s32 (*init_params)(struct e1000_hw *); + s32 (*id_led_init)(struct e1000_hw *); + s32 (*blink_led)(struct e1000_hw *); + bool (*check_mng_mode)(struct e1000_hw *); + s32 (*check_for_link)(struct e1000_hw *); + s32 (*cleanup_led)(struct e1000_hw *); + void (*clear_hw_cntrs)(struct e1000_hw *); + void (*clear_vfta)(struct e1000_hw *); + s32 (*get_bus_info)(struct e1000_hw *); + void (*set_lan_id)(struct e1000_hw *); + s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *); + s32 (*led_on)(struct e1000_hw *); + s32 (*led_off)(struct e1000_hw *); + void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32); + s32 (*reset_hw)(struct e1000_hw *); + s32 (*init_hw)(struct e1000_hw *); + void (*shutdown_serdes)(struct e1000_hw *); + void (*power_up_serdes)(struct e1000_hw *); + s32 (*setup_link)(struct e1000_hw *); + s32 (*setup_physical_interface)(struct e1000_hw *); + s32 (*setup_led)(struct e1000_hw *); + void (*write_vfta)(struct e1000_hw *, u32, u32); + void (*config_collision_dist)(struct e1000_hw *); + void (*rar_set)(struct e1000_hw *, u8*, u32); + s32 (*read_mac_addr)(struct e1000_hw *); + s32 (*validate_mdi_setting)(struct e1000_hw *); + s32 (*get_thermal_sensor_data)(struct e1000_hw *); + s32 (*init_thermal_sensor_thresh)(struct e1000_hw *); + s32 (*acquire_swfw_sync)(struct e1000_hw *, u16); + void (*release_swfw_sync)(struct e1000_hw *, u16); +}; + +/* When to use various PHY register access functions: + * + * Func Caller + * Function Does Does When to use + * ~~~~~~~~~~~~ ~~~~~ ~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * X_reg L,P,A n/a for simple PHY reg accesses + * X_reg_locked P,A L for multiple accesses of different regs + * on different pages + * X_reg_page A L,P for multiple accesses of different regs + * on the same page + * + * Where X=[read|write], L=locking, P=sets page, A=register access + * + */ +struct e1000_phy_operations { + s32 (*init_params)(struct e1000_hw *); + s32 (*acquire)(struct e1000_hw *); + s32 (*check_polarity)(struct e1000_hw *); + s32 (*check_reset_block)(struct e1000_hw *); + s32 (*commit)(struct e1000_hw *); + s32 (*force_speed_duplex)(struct e1000_hw *); + s32 (*get_cfg_done)(struct e1000_hw *hw); + s32 (*get_cable_length)(struct e1000_hw *); + s32 (*get_info)(struct e1000_hw *); + s32 (*set_page)(struct e1000_hw *, u16); + s32 (*read_reg)(struct e1000_hw *, u32, u16 *); + s32 (*read_reg_locked)(struct e1000_hw *, u32, u16 *); + s32 (*read_reg_page)(struct e1000_hw *, u32, u16 *); + void (*release)(struct e1000_hw *); + s32 (*reset)(struct e1000_hw *); + s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); + s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); + s32 (*write_reg)(struct e1000_hw *, u32, u16); + s32 (*write_reg_locked)(struct e1000_hw *, u32, u16); + s32 (*write_reg_page)(struct e1000_hw *, u32, u16); + void (*power_up)(struct e1000_hw *); + void (*power_down)(struct e1000_hw *); + s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *); + s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8); +}; + +/* Function pointers for the NVM. */ +struct e1000_nvm_operations { + s32 (*init_params)(struct e1000_hw *); + s32 (*acquire)(struct e1000_hw *); + s32 (*read)(struct e1000_hw *, u16, u16, u16 *); + void (*release)(struct e1000_hw *); + void (*reload)(struct e1000_hw *); + s32 (*update)(struct e1000_hw *); + s32 (*valid_led_default)(struct e1000_hw *, u16 *); + s32 (*validate)(struct e1000_hw *); + s32 (*write)(struct e1000_hw *, u16, u16, u16 *); +}; + +#define E1000_MAX_SENSORS 3 + +struct e1000_thermal_diode_data { + u8 location; + u8 temp; + u8 caution_thresh; + u8 max_op_thresh; +}; + +struct e1000_thermal_sensor_data { + struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS]; +}; + +struct e1000_mac_info { + struct e1000_mac_operations ops; + u8 addr[ETH_ADDR_LEN]; + u8 perm_addr[ETH_ADDR_LEN]; + + enum e1000_mac_type type; + + u32 collision_delta; + u32 ledctl_default; + u32 ledctl_mode1; + u32 ledctl_mode2; + u32 mc_filter_type; + u32 tx_packet_delta; + u32 txcw; + + u16 current_ifs_val; + u16 ifs_max_val; + u16 ifs_min_val; + u16 ifs_ratio; + u16 ifs_step_size; + u16 mta_reg_count; + u16 uta_reg_count; + + /* Maximum size of the MTA register table in all supported adapters */ + #define MAX_MTA_REG 128 + u32 mta_shadow[MAX_MTA_REG]; + u16 rar_entry_count; + + u8 forced_speed_duplex; + + bool adaptive_ifs; + bool has_fwsm; + bool arc_subsystem_valid; + bool asf_firmware_present; + bool autoneg; + bool autoneg_failed; + bool get_link_status; + bool in_ifs_mode; + enum e1000_serdes_link_state serdes_link_state; + bool serdes_has_link; + bool tx_pkt_filtering; + struct e1000_thermal_sensor_data thermal_sensor_data; +}; + +struct e1000_phy_info { + struct e1000_phy_operations ops; + enum e1000_phy_type type; + + enum e1000_1000t_rx_status local_rx; + enum e1000_1000t_rx_status remote_rx; + enum e1000_ms_type ms_type; + enum e1000_ms_type original_ms_type; + enum e1000_rev_polarity cable_polarity; + enum e1000_smart_speed smart_speed; + + u32 addr; + u32 id; + u32 reset_delay_us; /* in usec */ + u32 revision; + + enum e1000_media_type media_type; + + u16 autoneg_advertised; + u16 autoneg_mask; + u16 cable_length; + u16 max_cable_length; + u16 min_cable_length; + + u8 mdix; + + bool disable_polarity_correction; + bool is_mdix; + bool polarity_correction; + bool reset_disable; + bool speed_downgraded; + bool autoneg_wait_to_complete; +}; + +struct e1000_nvm_info { + struct e1000_nvm_operations ops; + enum e1000_nvm_type type; + enum e1000_nvm_override override; + + u32 flash_bank_size; + u32 flash_base_addr; + + u16 word_size; + u16 delay_usec; + u16 address_bits; + u16 opcode_bits; + u16 page_size; +}; + +struct e1000_bus_info { + enum e1000_bus_type type; + enum e1000_bus_speed speed; + enum e1000_bus_width width; + + u16 func; + u16 pci_cmd_word; +}; + +struct e1000_fc_info { + u32 high_water; /* Flow control high-water mark */ + u32 low_water; /* Flow control low-water mark */ + u16 pause_time; /* Flow control pause timer */ + u16 refresh_time; /* Flow control refresh timer */ + bool send_xon; /* Flow control send XON */ + bool strict_ieee; /* Strict IEEE mode */ + enum e1000_fc_mode current_mode; /* FC mode in effect */ + enum e1000_fc_mode requested_mode; /* FC mode requested by caller */ +}; + +struct e1000_mbx_operations { + s32 (*init_params)(struct e1000_hw *hw); + s32 (*read)(struct e1000_hw *, u32 *, u16, u16); + s32 (*write)(struct e1000_hw *, u32 *, u16, u16); + s32 (*read_posted)(struct e1000_hw *, u32 *, u16, u16); + s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16); + s32 (*check_for_msg)(struct e1000_hw *, u16); + s32 (*check_for_ack)(struct e1000_hw *, u16); + s32 (*check_for_rst)(struct e1000_hw *, u16); +}; + +struct e1000_mbx_stats { + u32 msgs_tx; + u32 msgs_rx; + + u32 acks; + u32 reqs; + u32 rsts; +}; + +struct e1000_mbx_info { + struct e1000_mbx_operations ops; + struct e1000_mbx_stats stats; + u32 timeout; + u32 usec_delay; + u16 size; +}; + +struct e1000_dev_spec_82575 { + bool sgmii_active; + bool global_device_reset; + bool eee_disable; + bool module_plugged; + bool clear_semaphore_once; + u32 mtu; + struct sfp_e1000_flags eth_flags; + u8 media_port; + bool media_changed; +}; + +struct e1000_dev_spec_vf { + u32 vf_number; + u32 v2p_mailbox; +}; + +struct e1000_hw { + void *back; + + u8 __iomem *hw_addr; + u8 __iomem *flash_address; + unsigned long io_base; + + struct e1000_mac_info mac; + struct e1000_fc_info fc; + struct e1000_phy_info phy; + struct e1000_nvm_info nvm; + struct e1000_bus_info bus; + struct e1000_mbx_info mbx; + struct e1000_host_mng_dhcp_cookie mng_cookie; + + union { + struct e1000_dev_spec_82575 _82575; + struct e1000_dev_spec_vf vf; + } dev_spec; + + u16 device_id; + u16 subsystem_vendor_id; + u16 subsystem_device_id; + u16 vendor_id; + + u8 revision_id; +}; + +#include "e1000_82575.h" +#include "e1000_i210.h" + +/* These functions must be implemented by drivers */ +s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); +s32 e1000_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value); + +#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_i210.c b/kernel/linux/kni/ethtool/igb/e1000_i210.c new file mode 100644 index 00000000..a4fabc3a --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_i210.c @@ -0,0 +1,894 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_api.h" + + +static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw); +static void e1000_release_nvm_i210(struct e1000_hw *hw); +static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw); +static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +static s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw); +static s32 e1000_valid_led_default_i210(struct e1000_hw *hw, u16 *data); + +/** + * e1000_acquire_nvm_i210 - Request for access to EEPROM + * @hw: pointer to the HW structure + * + * Acquire the necessary semaphores for exclusive access to the EEPROM. + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -E1000_ERR_NVM (-1). + **/ +static s32 e1000_acquire_nvm_i210(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_acquire_nvm_i210"); + + ret_val = e1000_acquire_swfw_sync_i210(hw, E1000_SWFW_EEP_SM); + + return ret_val; +} + +/** + * e1000_release_nvm_i210 - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit, + * then release the semaphores acquired. + **/ +static void e1000_release_nvm_i210(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_release_nvm_i210"); + + e1000_release_swfw_sync_i210(hw, E1000_SWFW_EEP_SM); +} + +/** + * e1000_acquire_swfw_sync_i210 - Acquire SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Acquire the SW/FW semaphore to access the PHY or NVM. The mask + * will also specify which port we're acquiring the lock for. + **/ +s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + u32 fwmask = mask << 16; + s32 ret_val = E1000_SUCCESS; + s32 i = 0, timeout = 200; /* FIXME: find real value to use here */ + + DEBUGFUNC("e1000_acquire_swfw_sync_i210"); + + while (i < timeout) { + if (e1000_get_hw_semaphore_i210(hw)) { + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); + if (!(swfw_sync & (fwmask | swmask))) + break; + + /* + * Firmware currently using resource (fwmask) + * or other software thread using resource (swmask) + */ + e1000_put_hw_semaphore_generic(hw); + msec_delay_irq(5); + i++; + } + + if (i == timeout) { + DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n"); + ret_val = -E1000_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync |= swmask; + E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); + + e1000_put_hw_semaphore_generic(hw); + +out: + return ret_val; +} + +/** + * e1000_release_swfw_sync_i210 - Release SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Release the SW/FW semaphore used to access the PHY or NVM. The mask + * will also specify which port we're releasing the lock for. + **/ +void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask) +{ + u32 swfw_sync; + + DEBUGFUNC("e1000_release_swfw_sync_i210"); + + while (e1000_get_hw_semaphore_i210(hw) != E1000_SUCCESS) + ; /* Empty */ + + swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); + swfw_sync &= ~mask; + E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); + + e1000_put_hw_semaphore_generic(hw); +} + +/** + * e1000_get_hw_semaphore_i210 - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore to access the PHY or NVM + **/ +static s32 e1000_get_hw_semaphore_i210(struct e1000_hw *hw) +{ + u32 swsm; + s32 timeout = hw->nvm.word_size + 1; + s32 i = 0; + + DEBUGFUNC("e1000_get_hw_semaphore_i210"); + + /* Get the SW semaphore */ + while (i < timeout) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + if (!(swsm & E1000_SWSM_SMBI)) + break; + + usec_delay(50); + i++; + } + + if (i == timeout) { + /* In rare circumstances, the SW semaphore may already be held + * unintentionally. Clear the semaphore once before giving up. + */ + if (hw->dev_spec._82575.clear_semaphore_once) { + hw->dev_spec._82575.clear_semaphore_once = false; + e1000_put_hw_semaphore_generic(hw); + for (i = 0; i < timeout; i++) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + if (!(swsm & E1000_SWSM_SMBI)) + break; + + usec_delay(50); + } + } + + /* If we do not have the semaphore here, we have to give up. */ + if (i == timeout) { + DEBUGOUT("Driver can't access device - SMBI bit is set.\n"); + return -E1000_ERR_NVM; + } + } + + /* Get the FW semaphore. */ + for (i = 0; i < timeout; i++) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI); + + /* Semaphore acquired if bit latched */ + if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI) + break; + + usec_delay(50); + } + + if (i == timeout) { + /* Release semaphores */ + e1000_put_hw_semaphore_generic(hw); + DEBUGOUT("Driver can't access the NVM\n"); + return -E1000_ERR_NVM; + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_nvm_srrd_i210 - Reads Shadow Ram using EERD register + * @hw: pointer to the HW structure + * @offset: offset of word in the Shadow Ram to read + * @words: number of words to read + * @data: word read from the Shadow Ram + * + * Reads a 16 bit word from the Shadow Ram using the EERD register. + * Uses necessary synchronization semaphores. + **/ +s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 status = E1000_SUCCESS; + u16 i, count; + + DEBUGFUNC("e1000_read_nvm_srrd_i210"); + + /* We cannot hold synchronization semaphores for too long, + * because of forceful takeover procedure. However it is more efficient + * to read in bursts than synchronizing access for each word. */ + for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) { + count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ? + E1000_EERD_EEWR_MAX_COUNT : (words - i); + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + status = e1000_read_nvm_eerd(hw, offset, count, + data + i); + hw->nvm.ops.release(hw); + } else { + status = E1000_ERR_SWFW_SYNC; + } + + if (status != E1000_SUCCESS) + break; + } + + return status; +} + +/** + * e1000_write_nvm_srwr_i210 - Write to Shadow RAM using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow RAM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow RAM + * + * Writes data to Shadow RAM at offset using EEWR register. + * + * If e1000_update_nvm_checksum is not called after this function , the + * data will not be committed to FLASH and also Shadow RAM will most likely + * contain an invalid checksum. + * + * If error code is returned, data and Shadow RAM may be inconsistent - buffer + * partially written. + **/ +s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 status = E1000_SUCCESS; + u16 i, count; + + DEBUGFUNC("e1000_write_nvm_srwr_i210"); + + /* We cannot hold synchronization semaphores for too long, + * because of forceful takeover procedure. However it is more efficient + * to write in bursts than synchronizing access for each word. */ + for (i = 0; i < words; i += E1000_EERD_EEWR_MAX_COUNT) { + count = (words - i) / E1000_EERD_EEWR_MAX_COUNT > 0 ? + E1000_EERD_EEWR_MAX_COUNT : (words - i); + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + status = e1000_write_nvm_srwr(hw, offset, count, + data + i); + hw->nvm.ops.release(hw); + } else { + status = E1000_ERR_SWFW_SYNC; + } + + if (status != E1000_SUCCESS) + break; + } + + return status; +} + +/** + * e1000_write_nvm_srwr - Write to Shadow Ram using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow Ram to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow Ram + * + * Writes data to Shadow Ram at offset using EEWR register. + * + * If e1000_update_nvm_checksum is not called after this function , the + * Shadow Ram will most likely contain an invalid checksum. + **/ +static s32 e1000_write_nvm_srwr(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i, k, eewr = 0; + u32 attempts = 100000; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_write_nvm_srwr"); + + /* + * A check for invalid values: offset too large, too many words, + * too many words for the offset, and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + ret_val = -E1000_ERR_NVM; + goto out; + } + + for (i = 0; i < words; i++) { + eewr = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) | + (data[i] << E1000_NVM_RW_REG_DATA) | + E1000_NVM_RW_REG_START; + + E1000_WRITE_REG(hw, E1000_SRWR, eewr); + + for (k = 0; k < attempts; k++) { + if (E1000_NVM_RW_REG_DONE & + E1000_READ_REG(hw, E1000_SRWR)) { + ret_val = E1000_SUCCESS; + break; + } + usec_delay(5); + } + + if (ret_val != E1000_SUCCESS) { + DEBUGOUT("Shadow RAM write EEWR timed out\n"); + break; + } + } + +out: + return ret_val; +} + +/** e1000_read_invm_word_i210 - Reads OTP + * @hw: pointer to the HW structure + * @address: the word address (aka eeprom offset) to read + * @data: pointer to the data read + * + * Reads 16-bit words from the OTP. Return error when the word is not + * stored in OTP. + **/ +static s32 e1000_read_invm_word_i210(struct e1000_hw *hw, u8 address, u16 *data) +{ + s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND; + u32 invm_dword; + u16 i; + u8 record_type, word_address; + + DEBUGFUNC("e1000_read_invm_word_i210"); + + for (i = 0; i < E1000_INVM_SIZE; i++) { + invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i)); + /* Get record type */ + record_type = INVM_DWORD_TO_RECORD_TYPE(invm_dword); + if (record_type == E1000_INVM_UNINITIALIZED_STRUCTURE) + break; + if (record_type == E1000_INVM_CSR_AUTOLOAD_STRUCTURE) + i += E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS; + if (record_type == E1000_INVM_RSA_KEY_SHA256_STRUCTURE) + i += E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS; + if (record_type == E1000_INVM_WORD_AUTOLOAD_STRUCTURE) { + word_address = INVM_DWORD_TO_WORD_ADDRESS(invm_dword); + if (word_address == address) { + *data = INVM_DWORD_TO_WORD_DATA(invm_dword); + DEBUGOUT2("Read INVM Word 0x%02x = %x", + address, *data); + status = E1000_SUCCESS; + break; + } + } + } + if (status != E1000_SUCCESS) + DEBUGOUT1("Requested word 0x%02x not found in OTP\n", address); + return status; +} + +/** e1000_read_invm_i210 - Read invm wrapper function for I210/I211 + * @hw: pointer to the HW structure + * @address: the word address (aka eeprom offset) to read + * @data: pointer to the data read + * + * Wrapper function to return data formerly found in the NVM. + **/ +static s32 e1000_read_invm_i210(struct e1000_hw *hw, u16 offset, + u16 E1000_UNUSEDARG words, u16 *data) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_read_invm_i210"); + + /* Only the MAC addr is required to be present in the iNVM */ + switch (offset) { + case NVM_MAC_ADDR: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, &data[0]); + ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+1, + &data[1]); + ret_val |= e1000_read_invm_word_i210(hw, (u8)offset+2, + &data[2]); + if (ret_val != E1000_SUCCESS) + DEBUGOUT("MAC Addr not found in iNVM\n"); + break; + case NVM_INIT_CTRL_2: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_INIT_CTRL_2_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; + case NVM_INIT_CTRL_4: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_INIT_CTRL_4_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; + case NVM_LED_1_CFG: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_LED_1_CFG_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; + case NVM_LED_0_2_CFG: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = NVM_LED_0_2_CFG_DEFAULT_I211; + ret_val = E1000_SUCCESS; + } + break; + case NVM_ID_LED_SETTINGS: + ret_val = e1000_read_invm_word_i210(hw, (u8)offset, data); + if (ret_val != E1000_SUCCESS) { + *data = ID_LED_RESERVED_FFFF; + ret_val = E1000_SUCCESS; + } + break; + case NVM_SUB_DEV_ID: + *data = hw->subsystem_device_id; + break; + case NVM_SUB_VEN_ID: + *data = hw->subsystem_vendor_id; + break; + case NVM_DEV_ID: + *data = hw->device_id; + break; + case NVM_VEN_ID: + *data = hw->vendor_id; + break; + default: + DEBUGOUT1("NVM word 0x%02x is not mapped.\n", offset); + *data = NVM_RESERVED_WORD; + break; + } + return ret_val; +} + +/** + * e1000_read_invm_version - Reads iNVM version and image type + * @hw: pointer to the HW structure + * @invm_ver: version structure for the version read + * + * Reads iNVM version and image type. + **/ +s32 e1000_read_invm_version(struct e1000_hw *hw, + struct e1000_fw_version *invm_ver) +{ + u32 *record = NULL; + u32 *next_record = NULL; + u32 i = 0; + u32 invm_dword = 0; + u32 invm_blocks = E1000_INVM_SIZE - (E1000_INVM_ULT_BYTES_SIZE / + E1000_INVM_RECORD_SIZE_IN_BYTES); + u32 buffer[E1000_INVM_SIZE]; + s32 status = -E1000_ERR_INVM_VALUE_NOT_FOUND; + u16 version = 0; + + DEBUGFUNC("e1000_read_invm_version"); + + /* Read iNVM memory */ + for (i = 0; i < E1000_INVM_SIZE; i++) { + invm_dword = E1000_READ_REG(hw, E1000_INVM_DATA_REG(i)); + buffer[i] = invm_dword; + } + + /* Read version number */ + for (i = 1; i < invm_blocks; i++) { + record = &buffer[invm_blocks - i]; + next_record = &buffer[invm_blocks - i + 1]; + + /* Check if we have first version location used */ + if ((i == 1) && ((*record & E1000_INVM_VER_FIELD_ONE) == 0)) { + version = 0; + status = E1000_SUCCESS; + break; + } + /* Check if we have second version location used */ + else if ((i == 1) && + ((*record & E1000_INVM_VER_FIELD_TWO) == 0)) { + version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3; + status = E1000_SUCCESS; + break; + } + /* + * Check if we have odd version location + * used and it is the last one used + */ + else if ((((*record & E1000_INVM_VER_FIELD_ONE) == 0) && + ((*record & 0x3) == 0)) || (((*record & 0x3) != 0) && + (i != 1))) { + version = (*next_record & E1000_INVM_VER_FIELD_TWO) + >> 13; + status = E1000_SUCCESS; + break; + } + /* + * Check if we have even version location + * used and it is the last one used + */ + else if (((*record & E1000_INVM_VER_FIELD_TWO) == 0) && + ((*record & 0x3) == 0)) { + version = (*record & E1000_INVM_VER_FIELD_ONE) >> 3; + status = E1000_SUCCESS; + break; + } + } + + if (status == E1000_SUCCESS) { + invm_ver->invm_major = (version & E1000_INVM_MAJOR_MASK) + >> E1000_INVM_MAJOR_SHIFT; + invm_ver->invm_minor = version & E1000_INVM_MINOR_MASK; + } + /* Read Image Type */ + for (i = 1; i < invm_blocks; i++) { + record = &buffer[invm_blocks - i]; + next_record = &buffer[invm_blocks - i + 1]; + + /* Check if we have image type in first location used */ + if ((i == 1) && ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) { + invm_ver->invm_img_type = 0; + status = E1000_SUCCESS; + break; + } + /* Check if we have image type in first location used */ + else if ((((*record & 0x3) == 0) && + ((*record & E1000_INVM_IMGTYPE_FIELD) == 0)) || + ((((*record & 0x3) != 0) && (i != 1)))) { + invm_ver->invm_img_type = + (*next_record & E1000_INVM_IMGTYPE_FIELD) >> 23; + status = E1000_SUCCESS; + break; + } + } + return status; +} + +/** + * e1000_validate_nvm_checksum_i210 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + **/ +s32 e1000_validate_nvm_checksum_i210(struct e1000_hw *hw) +{ + s32 status = E1000_SUCCESS; + s32 (*read_op_ptr)(struct e1000_hw *, u16, u16, u16 *); + + DEBUGFUNC("e1000_validate_nvm_checksum_i210"); + + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + + /* + * Replace the read function with semaphore grabbing with + * the one that skips this for a while. + * We have semaphore taken already here. + */ + read_op_ptr = hw->nvm.ops.read; + hw->nvm.ops.read = e1000_read_nvm_eerd; + + status = e1000_validate_nvm_checksum_generic(hw); + + /* Revert original read operation. */ + hw->nvm.ops.read = read_op_ptr; + + hw->nvm.ops.release(hw); + } else { + status = E1000_ERR_SWFW_SYNC; + } + + return status; +} + + +/** + * e1000_update_nvm_checksum_i210 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. Next commit EEPROM data onto the Flash. + **/ +s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_update_nvm_checksum_i210"); + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + ret_val = e1000_read_nvm_eerd(hw, 0, 1, &nvm_data); + if (ret_val != E1000_SUCCESS) { + DEBUGOUT("EEPROM read failed\n"); + goto out; + } + + if (hw->nvm.ops.acquire(hw) == E1000_SUCCESS) { + /* + * Do not use hw->nvm.ops.write, hw->nvm.ops.read + * because we do not want to take the synchronization + * semaphores twice here. + */ + + for (i = 0; i < NVM_CHECKSUM_REG; i++) { + ret_val = e1000_read_nvm_eerd(hw, i, 1, &nvm_data); + if (ret_val) { + hw->nvm.ops.release(hw); + DEBUGOUT("NVM Read Error while updating checksum.\n"); + goto out; + } + checksum += nvm_data; + } + checksum = (u16) NVM_SUM - checksum; + ret_val = e1000_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1, + &checksum); + if (ret_val != E1000_SUCCESS) { + hw->nvm.ops.release(hw); + DEBUGOUT("NVM Write Error while updating checksum.\n"); + goto out; + } + + hw->nvm.ops.release(hw); + + ret_val = e1000_update_flash_i210(hw); + } else { + ret_val = E1000_ERR_SWFW_SYNC; + } +out: + return ret_val; +} + +/** + * e1000_get_flash_presence_i210 - Check if flash device is detected. + * @hw: pointer to the HW structure + * + **/ +bool e1000_get_flash_presence_i210(struct e1000_hw *hw) +{ + u32 eec = 0; + bool ret_val = false; + + DEBUGFUNC("e1000_get_flash_presence_i210"); + + eec = E1000_READ_REG(hw, E1000_EECD); + + if (eec & E1000_EECD_FLASH_DETECTED_I210) + ret_val = true; + + return ret_val; +} + +/** + * e1000_update_flash_i210 - Commit EEPROM to the flash + * @hw: pointer to the HW structure + * + **/ +s32 e1000_update_flash_i210(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u32 flup; + + DEBUGFUNC("e1000_update_flash_i210"); + + ret_val = e1000_pool_flash_update_done_i210(hw); + if (ret_val == -E1000_ERR_NVM) { + DEBUGOUT("Flash update time out\n"); + goto out; + } + + flup = E1000_READ_REG(hw, E1000_EECD) | E1000_EECD_FLUPD_I210; + E1000_WRITE_REG(hw, E1000_EECD, flup); + + ret_val = e1000_pool_flash_update_done_i210(hw); + if (ret_val == E1000_SUCCESS) + DEBUGOUT("Flash update complete\n"); + else + DEBUGOUT("Flash update time out\n"); + +out: + return ret_val; +} + +/** + * e1000_pool_flash_update_done_i210 - Pool FLUDONE status. + * @hw: pointer to the HW structure + * + **/ +s32 e1000_pool_flash_update_done_i210(struct e1000_hw *hw) +{ + s32 ret_val = -E1000_ERR_NVM; + u32 i, reg; + + DEBUGFUNC("e1000_pool_flash_update_done_i210"); + + for (i = 0; i < E1000_FLUDONE_ATTEMPTS; i++) { + reg = E1000_READ_REG(hw, E1000_EECD); + if (reg & E1000_EECD_FLUDONE_I210) { + ret_val = E1000_SUCCESS; + break; + } + usec_delay(5); + } + + return ret_val; +} + +/** + * e1000_init_nvm_params_i210 - Initialize i210 NVM function pointers + * @hw: pointer to the HW structure + * + * Initialize the i210/i211 NVM parameters and function pointers. + **/ +static s32 e1000_init_nvm_params_i210(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + struct e1000_nvm_info *nvm = &hw->nvm; + + DEBUGFUNC("e1000_init_nvm_params_i210"); + + ret_val = e1000_init_nvm_params_82575(hw); + nvm->ops.acquire = e1000_acquire_nvm_i210; + nvm->ops.release = e1000_release_nvm_i210; + nvm->ops.valid_led_default = e1000_valid_led_default_i210; + if (e1000_get_flash_presence_i210(hw)) { + hw->nvm.type = e1000_nvm_flash_hw; + nvm->ops.read = e1000_read_nvm_srrd_i210; + nvm->ops.write = e1000_write_nvm_srwr_i210; + nvm->ops.validate = e1000_validate_nvm_checksum_i210; + nvm->ops.update = e1000_update_nvm_checksum_i210; + } else { + hw->nvm.type = e1000_nvm_invm; + nvm->ops.read = e1000_read_invm_i210; + nvm->ops.write = e1000_null_write_nvm; + nvm->ops.validate = e1000_null_ops_generic; + nvm->ops.update = e1000_null_ops_generic; + } + return ret_val; +} + +/** + * e1000_init_function_pointers_i210 - Init func ptrs. + * @hw: pointer to the HW structure + * + * Called to initialize all function pointers and parameters. + **/ +void e1000_init_function_pointers_i210(struct e1000_hw *hw) +{ + e1000_init_function_pointers_82575(hw); + hw->nvm.ops.init_params = e1000_init_nvm_params_i210; + + return; +} + +/** + * e1000_valid_led_default_i210 - Verify a valid default LED config + * @hw: pointer to the HW structure + * @data: pointer to the NVM (EEPROM) + * + * Read the EEPROM for the current default LED configuration. If the + * LED configuration is not valid, set to a valid LED configuration. + **/ +static s32 e1000_valid_led_default_i210(struct e1000_hw *hw, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_valid_led_default_i210"); + + ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + goto out; + } + + if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) { + switch (hw->phy.media_type) { + case e1000_media_type_internal_serdes: + *data = ID_LED_DEFAULT_I210_SERDES; + break; + case e1000_media_type_copper: + default: + *data = ID_LED_DEFAULT_I210; + break; + } + } +out: + return ret_val; +} + +/** + * __e1000_access_xmdio_reg - Read/write XMDIO register + * @hw: pointer to the HW structure + * @address: XMDIO address to program + * @dev_addr: device address to program + * @data: pointer to value to read/write from/to the XMDIO address + * @read: boolean flag to indicate read or write + **/ +static s32 __e1000_access_xmdio_reg(struct e1000_hw *hw, u16 address, + u8 dev_addr, u16 *data, bool read) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("__e1000_access_xmdio_reg"); + + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, dev_addr); + if (ret_val) + return ret_val; + + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, address); + if (ret_val) + return ret_val; + + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, E1000_MMDAC_FUNC_DATA | + dev_addr); + if (ret_val) + return ret_val; + + if (read) + ret_val = hw->phy.ops.read_reg(hw, E1000_MMDAAD, data); + else + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAAD, *data); + if (ret_val) + return ret_val; + + /* Recalibrate the device back to 0 */ + ret_val = hw->phy.ops.write_reg(hw, E1000_MMDAC, 0); + if (ret_val) + return ret_val; + + return ret_val; +} + +/** + * e1000_read_xmdio_reg - Read XMDIO register + * @hw: pointer to the HW structure + * @addr: XMDIO address to program + * @dev_addr: device address to program + * @data: value to be read from the EMI address + **/ +s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data) +{ + DEBUGFUNC("e1000_read_xmdio_reg"); + + return __e1000_access_xmdio_reg(hw, addr, dev_addr, data, true); +} + +/** + * e1000_write_xmdio_reg - Write XMDIO register + * @hw: pointer to the HW structure + * @addr: XMDIO address to program + * @dev_addr: device address to program + * @data: value to be written to the XMDIO address + **/ +s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data) +{ + DEBUGFUNC("e1000_read_xmdio_reg"); + + return __e1000_access_xmdio_reg(hw, addr, dev_addr, &data, false); +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_i210.h b/kernel/linux/kni/ethtool/igb/e1000_i210.h new file mode 100644 index 00000000..9df7c203 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_i210.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_I210_H_ +#define _E1000_I210_H_ + +bool e1000_get_flash_presence_i210(struct e1000_hw *hw); +s32 e1000_update_flash_i210(struct e1000_hw *hw); +s32 e1000_update_nvm_checksum_i210(struct e1000_hw *hw); +s32 e1000_validate_nvm_checksum_i210(struct e1000_hw *hw); +s32 e1000_write_nvm_srwr_i210(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data); +s32 e1000_read_nvm_srrd_i210(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data); +s32 e1000_read_invm_version(struct e1000_hw *hw, + struct e1000_fw_version *invm_ver); +s32 e1000_acquire_swfw_sync_i210(struct e1000_hw *hw, u16 mask); +void e1000_release_swfw_sync_i210(struct e1000_hw *hw, u16 mask); +s32 e1000_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, + u16 *data); +s32 e1000_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, + u16 data); + +#define E1000_STM_OPCODE 0xDB00 +#define E1000_EEPROM_FLASH_SIZE_WORD 0x11 + +#define INVM_DWORD_TO_RECORD_TYPE(invm_dword) \ + (u8)((invm_dword) & 0x7) +#define INVM_DWORD_TO_WORD_ADDRESS(invm_dword) \ + (u8)(((invm_dword) & 0x0000FE00) >> 9) +#define INVM_DWORD_TO_WORD_DATA(invm_dword) \ + (u16)(((invm_dword) & 0xFFFF0000) >> 16) + +enum E1000_INVM_STRUCTURE_TYPE { + E1000_INVM_UNINITIALIZED_STRUCTURE = 0x00, + E1000_INVM_WORD_AUTOLOAD_STRUCTURE = 0x01, + E1000_INVM_CSR_AUTOLOAD_STRUCTURE = 0x02, + E1000_INVM_PHY_REGISTER_AUTOLOAD_STRUCTURE = 0x03, + E1000_INVM_RSA_KEY_SHA256_STRUCTURE = 0x04, + E1000_INVM_INVALIDATED_STRUCTURE = 0x0F, +}; + +#define E1000_INVM_RSA_KEY_SHA256_DATA_SIZE_IN_DWORDS 8 +#define E1000_INVM_CSR_AUTOLOAD_DATA_SIZE_IN_DWORDS 1 +#define E1000_INVM_ULT_BYTES_SIZE 8 +#define E1000_INVM_RECORD_SIZE_IN_BYTES 4 +#define E1000_INVM_VER_FIELD_ONE 0x1FF8 +#define E1000_INVM_VER_FIELD_TWO 0x7FE000 +#define E1000_INVM_IMGTYPE_FIELD 0x1F800000 + +#define E1000_INVM_MAJOR_MASK 0x3F0 +#define E1000_INVM_MINOR_MASK 0xF +#define E1000_INVM_MAJOR_SHIFT 4 + +#define ID_LED_DEFAULT_I210 ((ID_LED_OFF1_ON2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_OFF1_OFF2)) +#define ID_LED_DEFAULT_I210_SERDES ((ID_LED_DEF1_DEF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_OFF1_ON2)) + +/* NVM offset defaults for I211 devices */ +#define NVM_INIT_CTRL_2_DEFAULT_I211 0X7243 +#define NVM_INIT_CTRL_4_DEFAULT_I211 0x00C1 +#define NVM_LED_1_CFG_DEFAULT_I211 0x0184 +#define NVM_LED_0_2_CFG_DEFAULT_I211 0x200C +#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_mac.c b/kernel/linux/kni/ethtool/igb/e1000_mac.c new file mode 100644 index 00000000..13a42267 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_mac.c @@ -0,0 +1,2081 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_api.h" + +static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw); +static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw); +static void e1000_config_collision_dist_generic(struct e1000_hw *hw); +static void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index); + +/** + * e1000_init_mac_ops_generic - Initialize MAC function pointers + * @hw: pointer to the HW structure + * + * Setups up the function pointers to no-op functions + **/ +void e1000_init_mac_ops_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + DEBUGFUNC("e1000_init_mac_ops_generic"); + + /* General Setup */ + mac->ops.init_params = e1000_null_ops_generic; + mac->ops.init_hw = e1000_null_ops_generic; + mac->ops.reset_hw = e1000_null_ops_generic; + mac->ops.setup_physical_interface = e1000_null_ops_generic; + mac->ops.get_bus_info = e1000_null_ops_generic; + mac->ops.set_lan_id = e1000_set_lan_id_multi_port_pcie; + mac->ops.read_mac_addr = e1000_read_mac_addr_generic; + mac->ops.config_collision_dist = e1000_config_collision_dist_generic; + mac->ops.clear_hw_cntrs = e1000_null_mac_generic; + /* LED */ + mac->ops.cleanup_led = e1000_null_ops_generic; + mac->ops.setup_led = e1000_null_ops_generic; + mac->ops.blink_led = e1000_null_ops_generic; + mac->ops.led_on = e1000_null_ops_generic; + mac->ops.led_off = e1000_null_ops_generic; + /* LINK */ + mac->ops.setup_link = e1000_null_ops_generic; + mac->ops.get_link_up_info = e1000_null_link_info; + mac->ops.check_for_link = e1000_null_ops_generic; + /* Management */ + mac->ops.check_mng_mode = e1000_null_mng_mode; + /* VLAN, MC, etc. */ + mac->ops.update_mc_addr_list = e1000_null_update_mc; + mac->ops.clear_vfta = e1000_null_mac_generic; + mac->ops.write_vfta = e1000_null_write_vfta; + mac->ops.rar_set = e1000_rar_set_generic; + mac->ops.validate_mdi_setting = e1000_validate_mdi_setting_generic; +} + +/** + * e1000_null_ops_generic - No-op function, returns 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_ops_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_ops_generic"); + return E1000_SUCCESS; +} + +/** + * e1000_null_mac_generic - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_mac_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_mac_generic"); + return; +} + +/** + * e1000_null_link_info - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_link_info(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG *s, u16 E1000_UNUSEDARG *d) +{ + DEBUGFUNC("e1000_null_link_info"); + return E1000_SUCCESS; +} + +/** + * e1000_null_mng_mode - No-op function, return false + * @hw: pointer to the HW structure + **/ +bool e1000_null_mng_mode(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_mng_mode"); + return false; +} + +/** + * e1000_null_update_mc - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_update_mc(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG *h, u32 E1000_UNUSEDARG a) +{ + DEBUGFUNC("e1000_null_update_mc"); + return; +} + +/** + * e1000_null_write_vfta - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_write_vfta(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG a, u32 E1000_UNUSEDARG b) +{ + DEBUGFUNC("e1000_null_write_vfta"); + return; +} + +/** + * e1000_null_rar_set - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_rar_set(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG *h, u32 E1000_UNUSEDARG a) +{ + DEBUGFUNC("e1000_null_rar_set"); + return; +} + +/** + * e1000_get_bus_info_pcie_generic - Get PCIe bus information + * @hw: pointer to the HW structure + * + * Determines and stores the system bus information for a particular + * network interface. The following bus information is determined and stored: + * bus speed, bus width, type (PCIe), and PCIe function. + **/ +s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + struct e1000_bus_info *bus = &hw->bus; + s32 ret_val; + u16 pcie_link_status; + + DEBUGFUNC("e1000_get_bus_info_pcie_generic"); + + bus->type = e1000_bus_type_pci_express; + + ret_val = e1000_read_pcie_cap_reg(hw, PCIE_LINK_STATUS, + &pcie_link_status); + if (ret_val) { + bus->width = e1000_bus_width_unknown; + bus->speed = e1000_bus_speed_unknown; + } else { + switch (pcie_link_status & PCIE_LINK_SPEED_MASK) { + case PCIE_LINK_SPEED_2500: + bus->speed = e1000_bus_speed_2500; + break; + case PCIE_LINK_SPEED_5000: + bus->speed = e1000_bus_speed_5000; + break; + default: + bus->speed = e1000_bus_speed_unknown; + break; + } + + bus->width = (enum e1000_bus_width)((pcie_link_status & + PCIE_LINK_WIDTH_MASK) >> PCIE_LINK_WIDTH_SHIFT); + } + + mac->ops.set_lan_id(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices + * + * @hw: pointer to the HW structure + * + * Determines the LAN function id by reading memory-mapped registers + * and swaps the port value if requested. + **/ +static void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw) +{ + struct e1000_bus_info *bus = &hw->bus; + u32 reg; + + /* The status register reports the correct function number + * for the device regardless of function swap state. + */ + reg = E1000_READ_REG(hw, E1000_STATUS); + bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT; +} + +/** + * e1000_set_lan_id_single_port - Set LAN id for a single port device + * @hw: pointer to the HW structure + * + * Sets the LAN function id to zero for a single port device. + **/ +void e1000_set_lan_id_single_port(struct e1000_hw *hw) +{ + struct e1000_bus_info *bus = &hw->bus; + + bus->func = 0; +} + +/** + * e1000_clear_vfta_generic - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * Clears the register array which contains the VLAN filter table by + * setting all the values to 0. + **/ +void e1000_clear_vfta_generic(struct e1000_hw *hw) +{ + u32 offset; + + DEBUGFUNC("e1000_clear_vfta_generic"); + + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); + E1000_WRITE_FLUSH(hw); + } +} + +/** + * e1000_write_vfta_generic - Write value to VLAN filter table + * @hw: pointer to the HW structure + * @offset: register offset in VLAN filter table + * @value: register value written to VLAN filter table + * + * Writes value at the given offset in the register array which stores + * the VLAN filter table. + **/ +void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value) +{ + DEBUGFUNC("e1000_write_vfta_generic"); + + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_init_rx_addrs_generic - Initialize receive address's + * @hw: pointer to the HW structure + * @rar_count: receive address registers + * + * Setup the receive address registers by setting the base receive address + * register to the devices MAC address and clearing all the other receive + * address registers to 0. + **/ +void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count) +{ + u32 i; + u8 mac_addr[ETH_ADDR_LEN] = {0}; + + DEBUGFUNC("e1000_init_rx_addrs_generic"); + + /* Setup the receive address */ + DEBUGOUT("Programming MAC Address into RAR[0]\n"); + + hw->mac.ops.rar_set(hw, hw->mac.addr, 0); + + /* Zero out the other (rar_entry_count - 1) receive addresses */ + DEBUGOUT1("Clearing RAR[1-%u]\n", rar_count-1); + for (i = 1; i < rar_count; i++) + hw->mac.ops.rar_set(hw, mac_addr, i); +} + +/** + * e1000_check_alt_mac_addr_generic - Check for alternate MAC addr + * @hw: pointer to the HW structure + * + * Checks the nvm for an alternate MAC address. An alternate MAC address + * can be setup by pre-boot software and must be treated like a permanent + * address and must override the actual permanent MAC address. If an + * alternate MAC address is found it is programmed into RAR0, replacing + * the permanent address that was installed into RAR0 by the Si on reset. + * This function will return SUCCESS unless it encounters an error while + * reading the EEPROM. + **/ +s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) +{ + u32 i; + s32 ret_val; + u16 offset, nvm_alt_mac_addr_offset, nvm_data; + u8 alt_mac_addr[ETH_ADDR_LEN]; + + DEBUGFUNC("e1000_check_alt_mac_addr_generic"); + + ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &nvm_data); + if (ret_val) + return ret_val; + + + /* Alternate MAC address is handled by the option ROM for 82580 + * and newer. SW support not required. + */ + if (hw->mac.type >= e1000_82580) + return E1000_SUCCESS; + + ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1, + &nvm_alt_mac_addr_offset); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if ((nvm_alt_mac_addr_offset == 0xFFFF) || + (nvm_alt_mac_addr_offset == 0x0000)) + /* There is no Alternate MAC Address */ + return E1000_SUCCESS; + + if (hw->bus.func == E1000_FUNC_1) + nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1; + if (hw->bus.func == E1000_FUNC_2) + nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN2; + + if (hw->bus.func == E1000_FUNC_3) + nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN3; + for (i = 0; i < ETH_ADDR_LEN; i += 2) { + offset = nvm_alt_mac_addr_offset + (i >> 1); + ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + alt_mac_addr[i] = (u8)(nvm_data & 0xFF); + alt_mac_addr[i + 1] = (u8)(nvm_data >> 8); + } + + /* if multicast bit is set, the alternate address will not be used */ + if (alt_mac_addr[0] & 0x01) { + DEBUGOUT("Ignoring Alternate Mac Address with MC bit set\n"); + return E1000_SUCCESS; + } + + /* We have a valid alternate MAC address, and we want to treat it the + * same as the normal permanent MAC address stored by the HW into the + * RAR. Do this by mapping this address into RAR0. + */ + hw->mac.ops.rar_set(hw, alt_mac_addr, 0); + + return E1000_SUCCESS; +} + +/** + * e1000_rar_set_generic - Set receive address register + * @hw: pointer to the HW structure + * @addr: pointer to the receive address + * @index: receive address array register + * + * Sets the receive address array register at index to the address passed + * in by addr. + **/ +static void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) +{ + u32 rar_low, rar_high; + + DEBUGFUNC("e1000_rar_set_generic"); + + /* HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + + rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); + + /* If MAC address zero, no need to set the AV bit */ + if (rar_low || rar_high) + rar_high |= E1000_RAH_AV; + + /* Some bridges will combine consecutive 32-bit writes into + * a single burst write, which will malfunction on some parts. + * The flushes avoid this. + */ + E1000_WRITE_REG(hw, E1000_RAL(index), rar_low); + E1000_WRITE_FLUSH(hw); + E1000_WRITE_REG(hw, E1000_RAH(index), rar_high); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_hash_mc_addr_generic - Generate a multicast hash value + * @hw: pointer to the HW structure + * @mc_addr: pointer to a multicast address + * + * Generates a multicast address hash value which is used to determine + * the multicast filter table array address and new table value. + **/ +u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr) +{ + u32 hash_value, hash_mask; + u8 bit_shift = 0; + + DEBUGFUNC("e1000_hash_mc_addr_generic"); + + /* Register count multiplied by bits per register */ + hash_mask = (hw->mac.mta_reg_count * 32) - 1; + + /* For a mc_filter_type of 0, bit_shift is the number of left-shifts + * where 0xFF would still fall within the hash mask. + */ + while (hash_mask >> bit_shift != 0xFF) + bit_shift++; + + /* The portion of the address that is used for the hash table + * is determined by the mc_filter_type setting. + * The algorithm is such that there is a total of 8 bits of shifting. + * The bit_shift for a mc_filter_type of 0 represents the number of + * left-shifts where the MSB of mc_addr[5] would still fall within + * the hash_mask. Case 0 does this exactly. Since there are a total + * of 8 bits of shifting, then mc_addr[4] will shift right the + * remaining number of bits. Thus 8 - bit_shift. The rest of the + * cases are a variation of this algorithm...essentially raising the + * number of bits to shift mc_addr[5] left, while still keeping the + * 8-bit shifting total. + * + * For example, given the following Destination MAC Address and an + * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask), + * we can see that the bit_shift for case 0 is 4. These are the hash + * values resulting from each mc_filter_type... + * [0] [1] [2] [3] [4] [5] + * 01 AA 00 12 34 56 + * LSB MSB + * + * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563 + * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6 + * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163 + * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634 + */ + switch (hw->mac.mc_filter_type) { + default: + case 0: + break; + case 1: + bit_shift += 1; + break; + case 2: + bit_shift += 2; + break; + case 3: + bit_shift += 4; + break; + } + + hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | + (((u16) mc_addr[5]) << bit_shift))); + + return hash_value; +} + +/** + * e1000_update_mc_addr_list_generic - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * + * Updates entire Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + **/ +void e1000_update_mc_addr_list_generic(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count) +{ + u32 hash_value, hash_bit, hash_reg; + int i; + + DEBUGFUNC("e1000_update_mc_addr_list_generic"); + + /* clear mta_shadow */ + memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); + + /* update mta_shadow from mc_addr_list */ + for (i = 0; (u32) i < mc_addr_count; i++) { + hash_value = e1000_hash_mc_addr_generic(hw, mc_addr_list); + + hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); + hash_bit = hash_value & 0x1F; + + hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit); + mc_addr_list += (ETH_ADDR_LEN); + } + + /* replace the entire MTA table */ + for (i = hw->mac.mta_reg_count - 1; i >= 0; i--) + E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_clear_hw_cntrs_base_generic - Clear base hardware counters + * @hw: pointer to the HW structure + * + * Clears the base hardware counters by reading the counter registers. + **/ +void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_clear_hw_cntrs_base_generic"); + + E1000_READ_REG(hw, E1000_CRCERRS); + E1000_READ_REG(hw, E1000_SYMERRS); + E1000_READ_REG(hw, E1000_MPC); + E1000_READ_REG(hw, E1000_SCC); + E1000_READ_REG(hw, E1000_ECOL); + E1000_READ_REG(hw, E1000_MCC); + E1000_READ_REG(hw, E1000_LATECOL); + E1000_READ_REG(hw, E1000_COLC); + E1000_READ_REG(hw, E1000_DC); + E1000_READ_REG(hw, E1000_SEC); + E1000_READ_REG(hw, E1000_RLEC); + E1000_READ_REG(hw, E1000_XONRXC); + E1000_READ_REG(hw, E1000_XONTXC); + E1000_READ_REG(hw, E1000_XOFFRXC); + E1000_READ_REG(hw, E1000_XOFFTXC); + E1000_READ_REG(hw, E1000_FCRUC); + E1000_READ_REG(hw, E1000_GPRC); + E1000_READ_REG(hw, E1000_BPRC); + E1000_READ_REG(hw, E1000_MPRC); + E1000_READ_REG(hw, E1000_GPTC); + E1000_READ_REG(hw, E1000_GORCL); + E1000_READ_REG(hw, E1000_GORCH); + E1000_READ_REG(hw, E1000_GOTCL); + E1000_READ_REG(hw, E1000_GOTCH); + E1000_READ_REG(hw, E1000_RNBC); + E1000_READ_REG(hw, E1000_RUC); + E1000_READ_REG(hw, E1000_RFC); + E1000_READ_REG(hw, E1000_ROC); + E1000_READ_REG(hw, E1000_RJC); + E1000_READ_REG(hw, E1000_TORL); + E1000_READ_REG(hw, E1000_TORH); + E1000_READ_REG(hw, E1000_TOTL); + E1000_READ_REG(hw, E1000_TOTH); + E1000_READ_REG(hw, E1000_TPR); + E1000_READ_REG(hw, E1000_TPT); + E1000_READ_REG(hw, E1000_MPTC); + E1000_READ_REG(hw, E1000_BPTC); +} + +/** + * e1000_check_for_copper_link_generic - Check for link (Copper) + * @hw: pointer to the HW structure + * + * Checks to see of the link status of the hardware has changed. If a + * change in link status has been detected, then we read the PHY registers + * to get the current speed/duplex if link exists. + **/ +s32 e1000_check_for_copper_link_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + bool link; + + DEBUGFUNC("e1000_check_for_copper_link"); + + /* We only want to go out to the PHY registers to see if Auto-Neg + * has completed and/or if our link status has changed. The + * get_link_status flag is set upon receiving a Link Status + * Change or Rx Sequence Error interrupt. + */ + if (!mac->get_link_status) + return E1000_SUCCESS; + + /* First we want to see if the MII Status Register reports + * link. If so, then we want to get the current speed/duplex + * of the PHY. + */ + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) + return E1000_SUCCESS; /* No link detected */ + + mac->get_link_status = false; + + /* Check if there was DownShift, must be checked + * immediately after link-up + */ + e1000_check_downshift_generic(hw); + + /* If we are forcing speed/duplex, then we simply return since + * we have already determined whether we have link or not. + */ + if (!mac->autoneg) + return -E1000_ERR_CONFIG; + + /* Auto-Neg is enabled. Auto Speed Detection takes care + * of MAC speed/duplex configuration. So we only need to + * configure Collision Distance in the MAC. + */ + mac->ops.config_collision_dist(hw); + + /* Configure Flow Control now that Auto-Neg has completed. + * First, we need to restore the desired flow control + * settings because we may have had to re-autoneg with a + * different link partner. + */ + ret_val = e1000_config_fc_after_link_up_generic(hw); + if (ret_val) + DEBUGOUT("Error configuring flow control\n"); + + return ret_val; +} + +/** + * e1000_check_for_fiber_link_generic - Check for link (Fiber) + * @hw: pointer to the HW structure + * + * Checks for link up on the hardware. If link is not up and we have + * a signal, then we need to force link up. + **/ +s32 e1000_check_for_fiber_link_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 rxcw; + u32 ctrl; + u32 status; + s32 ret_val; + + DEBUGFUNC("e1000_check_for_fiber_link_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + status = E1000_READ_REG(hw, E1000_STATUS); + rxcw = E1000_READ_REG(hw, E1000_RXCW); + + /* If we don't have link (auto-negotiation failed or link partner + * cannot auto-negotiate), the cable is plugged in (we have signal), + * and our link partner is not trying to auto-negotiate with us (we + * are receiving idles or data), we need to force link up. We also + * need to give auto-negotiation time to complete, in case the cable + * was just plugged in. The autoneg_failed flag does this. + */ + /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ + if ((ctrl & E1000_CTRL_SWDPIN1) && !(status & E1000_STATUS_LU) && + !(rxcw & E1000_RXCW_C)) { + if (!mac->autoneg_failed) { + mac->autoneg_failed = true; + return E1000_SUCCESS; + } + DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); + + /* Disable auto-negotiation in the TXCW register */ + E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE)); + + /* Force link-up and also force full-duplex. */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Configure Flow Control after forcing link up. */ + ret_val = e1000_config_fc_after_link_up_generic(hw); + if (ret_val) { + DEBUGOUT("Error configuring flow control\n"); + return ret_val; + } + } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { + /* If we are forcing link and we are receiving /C/ ordered + * sets, re-enable auto-negotiation in the TXCW register + * and disable forced link in the Device Control register + * in an attempt to auto-negotiate with our link partner. + */ + DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); + E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw); + E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU)); + + mac->serdes_has_link = true; + } + + return E1000_SUCCESS; +} + +/** + * e1000_check_for_serdes_link_generic - Check for link (Serdes) + * @hw: pointer to the HW structure + * + * Checks for link up on the hardware. If link is not up and we have + * a signal, then we need to force link up. + **/ +s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 rxcw; + u32 ctrl; + u32 status; + s32 ret_val; + + DEBUGFUNC("e1000_check_for_serdes_link_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + status = E1000_READ_REG(hw, E1000_STATUS); + rxcw = E1000_READ_REG(hw, E1000_RXCW); + + /* If we don't have link (auto-negotiation failed or link partner + * cannot auto-negotiate), and our link partner is not trying to + * auto-negotiate with us (we are receiving idles or data), + * we need to force link up. We also need to give auto-negotiation + * time to complete. + */ + /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */ + if (!(status & E1000_STATUS_LU) && !(rxcw & E1000_RXCW_C)) { + if (!mac->autoneg_failed) { + mac->autoneg_failed = true; + return E1000_SUCCESS; + } + DEBUGOUT("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); + + /* Disable auto-negotiation in the TXCW register */ + E1000_WRITE_REG(hw, E1000_TXCW, (mac->txcw & ~E1000_TXCW_ANE)); + + /* Force link-up and also force full-duplex. */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Configure Flow Control after forcing link up. */ + ret_val = e1000_config_fc_after_link_up_generic(hw); + if (ret_val) { + DEBUGOUT("Error configuring flow control\n"); + return ret_val; + } + } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { + /* If we are forcing link and we are receiving /C/ ordered + * sets, re-enable auto-negotiation in the TXCW register + * and disable forced link in the Device Control register + * in an attempt to auto-negotiate with our link partner. + */ + DEBUGOUT("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); + E1000_WRITE_REG(hw, E1000_TXCW, mac->txcw); + E1000_WRITE_REG(hw, E1000_CTRL, (ctrl & ~E1000_CTRL_SLU)); + + mac->serdes_has_link = true; + } else if (!(E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW))) { + /* If we force link for non-auto-negotiation switch, check + * link status based on MAC synchronization for internal + * serdes media type. + */ + /* SYNCH bit and IV bit are sticky. */ + usec_delay(10); + rxcw = E1000_READ_REG(hw, E1000_RXCW); + if (rxcw & E1000_RXCW_SYNCH) { + if (!(rxcw & E1000_RXCW_IV)) { + mac->serdes_has_link = true; + DEBUGOUT("SERDES: Link up - forced.\n"); + } + } else { + mac->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - force failed.\n"); + } + } + + if (E1000_TXCW_ANE & E1000_READ_REG(hw, E1000_TXCW)) { + status = E1000_READ_REG(hw, E1000_STATUS); + if (status & E1000_STATUS_LU) { + /* SYNCH bit and IV bit are sticky, so reread rxcw. */ + usec_delay(10); + rxcw = E1000_READ_REG(hw, E1000_RXCW); + if (rxcw & E1000_RXCW_SYNCH) { + if (!(rxcw & E1000_RXCW_IV)) { + mac->serdes_has_link = true; + DEBUGOUT("SERDES: Link up - autoneg completed successfully.\n"); + } else { + mac->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - invalid codewords detected in autoneg.\n"); + } + } else { + mac->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - no sync.\n"); + } + } else { + mac->serdes_has_link = false; + DEBUGOUT("SERDES: Link down - autoneg failed\n"); + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_set_default_fc_generic - Set flow control default values + * @hw: pointer to the HW structure + * + * Read the EEPROM for the default values for flow control and store the + * values. + **/ +static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) +{ + s32 ret_val; + u16 nvm_data; + + DEBUGFUNC("e1000_set_default_fc_generic"); + + /* Read and store word 0x0F of the EEPROM. This word contains bits + * that determine the hardware's default PAUSE (flow control) mode, + * a bit that determines whether the HW defaults to enabling or + * disabling auto-negotiation, and the direction of the + * SW defined pins. If there is no SW over-ride of the flow + * control setting, then the variable hw->fc will + * be initialized based on a value in the EEPROM. + */ + ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data); + + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (!(nvm_data & NVM_WORD0F_PAUSE_MASK)) + hw->fc.requested_mode = e1000_fc_none; + else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == + NVM_WORD0F_ASM_DIR) + hw->fc.requested_mode = e1000_fc_tx_pause; + else + hw->fc.requested_mode = e1000_fc_full; + + return E1000_SUCCESS; +} + +/** + * e1000_setup_link_generic - Setup flow control and link settings + * @hw: pointer to the HW structure + * + * Determines which flow control settings to use, then configures flow + * control. Calls the appropriate media-specific link configuration + * function. Assuming the adapter has a valid link partner, a valid link + * should be established. Assumes the hardware has previously been reset + * and the transmitter and receiver are not enabled. + **/ +s32 e1000_setup_link_generic(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_setup_link_generic"); + + /* In the case of the phy reset being blocked, we already have a link. + * We do not need to set it up again. + */ + if (hw->phy.ops.check_reset_block && hw->phy.ops.check_reset_block(hw)) + return E1000_SUCCESS; + + /* If requested flow control is set to default, set flow control + * based on the EEPROM flow control settings. + */ + if (hw->fc.requested_mode == e1000_fc_default) { + ret_val = e1000_set_default_fc_generic(hw); + if (ret_val) + return ret_val; + } + + /* Save off the requested flow control mode for use later. Depending + * on the link partner's capabilities, we may or may not use this mode. + */ + hw->fc.current_mode = hw->fc.requested_mode; + + DEBUGOUT1("After fix-ups FlowControl is now = %x\n", + hw->fc.current_mode); + + /* Call the necessary media_type subroutine to configure the link. */ + ret_val = hw->mac.ops.setup_physical_interface(hw); + if (ret_val) + return ret_val; + + /* Initialize the flow control address, type, and PAUSE timer + * registers to their default values. This is done even if flow + * control is disabled, because it does not hurt anything to + * initialize these registers. + */ + DEBUGOUT("Initializing the Flow Control address, type and timer regs\n"); + E1000_WRITE_REG(hw, E1000_FCT, FLOW_CONTROL_TYPE); + E1000_WRITE_REG(hw, E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH); + E1000_WRITE_REG(hw, E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW); + + E1000_WRITE_REG(hw, E1000_FCTTV, hw->fc.pause_time); + + return e1000_set_fc_watermarks_generic(hw); +} + +/** + * e1000_commit_fc_settings_generic - Configure flow control + * @hw: pointer to the HW structure + * + * Write the flow control settings to the Transmit Config Word Register (TXCW) + * base on the flow control settings in e1000_mac_info. + **/ +static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 txcw; + + DEBUGFUNC("e1000_commit_fc_settings_generic"); + + /* Check for a software override of the flow control settings, and + * setup the device accordingly. If auto-negotiation is enabled, then + * software will have to set the "PAUSE" bits to the correct value in + * the Transmit Config Word Register (TXCW) and re-start auto- + * negotiation. However, if auto-negotiation is disabled, then + * software will have to manually configure the two flow control enable + * bits in the CTRL register. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but we + * do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + */ + switch (hw->fc.current_mode) { + case e1000_fc_none: + /* Flow control completely disabled by a software over-ride. */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); + break; + case e1000_fc_rx_pause: + /* Rx Flow control is enabled and Tx Flow control is disabled + * by a software over-ride. Since there really isn't a way to + * advertise that we are capable of Rx Pause ONLY, we will + * advertise that we support both symmetric and asymmetric Rx + * PAUSE. Later, we will disable the adapter's ability to send + * PAUSE frames. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); + break; + case e1000_fc_tx_pause: + /* Tx Flow control is enabled, and Rx Flow control is disabled, + * by a software over-ride. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); + break; + case e1000_fc_full: + /* Flow control (both Rx and Tx) is enabled by a software + * over-ride. + */ + txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + break; + } + + E1000_WRITE_REG(hw, E1000_TXCW, txcw); + mac->txcw = txcw; + + return E1000_SUCCESS; +} + +/** + * e1000_poll_fiber_serdes_link_generic - Poll for link up + * @hw: pointer to the HW structure + * + * Polls for link up by reading the status register, if link fails to come + * up with auto-negotiation, then the link is forced if a signal is detected. + **/ +static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 i, status; + s32 ret_val; + + DEBUGFUNC("e1000_poll_fiber_serdes_link_generic"); + + /* If we have a signal (the cable is plugged in, or assumed true for + * serdes media) then poll for a "Link-Up" indication in the Device + * Status Register. Time-out if a link isn't seen in 500 milliseconds + * seconds (Auto-negotiation should complete in less than 500 + * milliseconds even if the other end is doing it in SW). + */ + for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) { + msec_delay(10); + status = E1000_READ_REG(hw, E1000_STATUS); + if (status & E1000_STATUS_LU) + break; + } + if (i == FIBER_LINK_UP_LIMIT) { + DEBUGOUT("Never got a valid link from auto-neg!!!\n"); + mac->autoneg_failed = true; + /* AutoNeg failed to achieve a link, so we'll call + * mac->check_for_link. This routine will force the + * link up if we detect a signal. This will allow us to + * communicate with non-autonegotiating link partners. + */ + ret_val = mac->ops.check_for_link(hw); + if (ret_val) { + DEBUGOUT("Error while checking for link\n"); + return ret_val; + } + mac->autoneg_failed = false; + } else { + mac->autoneg_failed = false; + DEBUGOUT("Valid Link Found\n"); + } + + return E1000_SUCCESS; +} + +/** + * e1000_setup_fiber_serdes_link_generic - Setup link for fiber/serdes + * @hw: pointer to the HW structure + * + * Configures collision distance and flow control for fiber and serdes + * links. Upon successful setup, poll for link. + **/ +s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw) +{ + u32 ctrl; + s32 ret_val; + + DEBUGFUNC("e1000_setup_fiber_serdes_link_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + + /* Take the link out of reset */ + ctrl &= ~E1000_CTRL_LRST; + + hw->mac.ops.config_collision_dist(hw); + + ret_val = e1000_commit_fc_settings_generic(hw); + if (ret_val) + return ret_val; + + /* Since auto-negotiation is enabled, take the link out of reset (the + * link will be in reset, because we previously reset the chip). This + * will restart auto-negotiation. If auto-negotiation is successful + * then the link-up status bit will be set and the flow control enable + * bits (RFCE and TFCE) will be set according to their negotiated value. + */ + DEBUGOUT("Auto-negotiation enabled\n"); + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + E1000_WRITE_FLUSH(hw); + msec_delay(1); + + /* For these adapters, the SW definable pin 1 is set when the optics + * detect a signal. If we have a signal, then poll for a "Link-Up" + * indication. + */ + if (hw->phy.media_type == e1000_media_type_internal_serdes || + (E1000_READ_REG(hw, E1000_CTRL) & E1000_CTRL_SWDPIN1)) { + ret_val = e1000_poll_fiber_serdes_link_generic(hw); + } else { + DEBUGOUT("No signal detected\n"); + } + + return ret_val; +} + +/** + * e1000_config_collision_dist_generic - Configure collision distance + * @hw: pointer to the HW structure + * + * Configures the collision distance to the default value and is used + * during link setup. + **/ +static void e1000_config_collision_dist_generic(struct e1000_hw *hw) +{ + u32 tctl; + + DEBUGFUNC("e1000_config_collision_dist_generic"); + + tctl = E1000_READ_REG(hw, E1000_TCTL); + + tctl &= ~E1000_TCTL_COLD; + tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT; + + E1000_WRITE_REG(hw, E1000_TCTL, tctl); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_set_fc_watermarks_generic - Set flow control high/low watermarks + * @hw: pointer to the HW structure + * + * Sets the flow control high/low threshold (watermark) registers. If + * flow control XON frame transmission is enabled, then set XON frame + * transmission as well. + **/ +s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw) +{ + u32 fcrtl = 0, fcrth = 0; + + DEBUGFUNC("e1000_set_fc_watermarks_generic"); + + /* Set the flow control receive threshold registers. Normally, + * these registers will be set to a default threshold that may be + * adjusted later by the driver's runtime code. However, if the + * ability to transmit pause frames is not enabled, then these + * registers will be set to 0. + */ + if (hw->fc.current_mode & e1000_fc_tx_pause) { + /* We need to set up the Receive Threshold high and low water + * marks as well as (optionally) enabling the transmission of + * XON frames. + */ + fcrtl = hw->fc.low_water; + if (hw->fc.send_xon) + fcrtl |= E1000_FCRTL_XONE; + + fcrth = hw->fc.high_water; + } + E1000_WRITE_REG(hw, E1000_FCRTL, fcrtl); + E1000_WRITE_REG(hw, E1000_FCRTH, fcrth); + + return E1000_SUCCESS; +} + +/** + * e1000_force_mac_fc_generic - Force the MAC's flow control settings + * @hw: pointer to the HW structure + * + * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the + * device control register to reflect the adapter settings. TFCE and RFCE + * need to be explicitly set by software when a copper PHY is used because + * autonegotiation is managed by the PHY rather than the MAC. Software must + * also configure these bits when link is forced on a fiber connection. + **/ +s32 e1000_force_mac_fc_generic(struct e1000_hw *hw) +{ + u32 ctrl; + + DEBUGFUNC("e1000_force_mac_fc_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + + /* Because we didn't get link via the internal auto-negotiation + * mechanism (we either forced link or we got link via PHY + * auto-neg), we have to manually enable/disable transmit an + * receive flow control. + * + * The "Case" statement below enables/disable flow control + * according to the "hw->fc.current_mode" parameter. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause + * frames but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * frames but we do not receive pause frames). + * 3: Both Rx and Tx flow control (symmetric) is enabled. + * other: No other values should be possible at this point. + */ + DEBUGOUT1("hw->fc.current_mode = %u\n", hw->fc.current_mode); + + switch (hw->fc.current_mode) { + case e1000_fc_none: + ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); + break; + case e1000_fc_rx_pause: + ctrl &= (~E1000_CTRL_TFCE); + ctrl |= E1000_CTRL_RFCE; + break; + case e1000_fc_tx_pause: + ctrl &= (~E1000_CTRL_RFCE); + ctrl |= E1000_CTRL_TFCE; + break; + case e1000_fc_full: + ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + } + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + return E1000_SUCCESS; +} + +/** + * e1000_config_fc_after_link_up_generic - Configures flow control after link + * @hw: pointer to the HW structure + * + * Checks the status of auto-negotiation after link up to ensure that the + * speed and duplex were not forced. If the link needed to be forced, then + * flow control needs to be forced also. If auto-negotiation is enabled + * and did not fail, then we configure flow control based on our link + * partner. + **/ +s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val = E1000_SUCCESS; + u32 pcs_status_reg, pcs_adv_reg, pcs_lp_ability_reg, pcs_ctrl_reg; + u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg; + u16 speed, duplex; + + DEBUGFUNC("e1000_config_fc_after_link_up_generic"); + + /* Check for the case where we have fiber media and auto-neg failed + * so we had to force link. In this case, we need to force the + * configuration of the MAC to match the "fc" parameter. + */ + if (mac->autoneg_failed) { + if (hw->phy.media_type == e1000_media_type_fiber || + hw->phy.media_type == e1000_media_type_internal_serdes) + ret_val = e1000_force_mac_fc_generic(hw); + } else { + if (hw->phy.media_type == e1000_media_type_copper) + ret_val = e1000_force_mac_fc_generic(hw); + } + + if (ret_val) { + DEBUGOUT("Error forcing flow control settings\n"); + return ret_val; + } + + /* Check for the case where we have copper media and auto-neg is + * enabled. In this case, we need to check and see if Auto-Neg + * has completed, and if so, how the PHY and link partner has + * flow control configured. + */ + if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) { + /* Read the MII Status Register and check to see if AutoNeg + * has completed. We read this twice because this reg has + * some "sticky" (latched) bits. + */ + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &mii_status_reg); + if (ret_val) + return ret_val; + + if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { + DEBUGOUT("Copper PHY and Auto Neg has not completed.\n"); + return ret_val; + } + + /* The AutoNeg process has completed, so we now need to + * read both the Auto Negotiation Advertisement + * Register (Address 4) and the Auto_Negotiation Base + * Page Ability Register (Address 5) to determine how + * flow control was negotiated. + */ + ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV, + &mii_nway_adv_reg); + if (ret_val) + return ret_val; + ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY, + &mii_nway_lp_ability_reg); + if (ret_val) + return ret_val; + + /* Two bits in the Auto Negotiation Advertisement Register + * (Address 4) and two bits in the Auto Negotiation Base + * Page Ability Register (Address 5) determine flow control + * for both the PHY and the link partner. The following + * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, + * 1999, describes these PAUSE resolution bits and how flow + * control is determined based upon these settings. + * NOTE: DC = Don't Care + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution + *-------|---------|-------|---------|-------------------- + * 0 | 0 | DC | DC | e1000_fc_none + * 0 | 1 | 0 | DC | e1000_fc_none + * 0 | 1 | 1 | 0 | e1000_fc_none + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 1 | 0 | 0 | DC | e1000_fc_none + * 1 | DC | 1 | DC | e1000_fc_full + * 1 | 1 | 0 | 0 | e1000_fc_none + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * + * Are both PAUSE bits set to 1? If so, this implies + * Symmetric Flow Control is enabled at both ends. The + * ASM_DIR bits are irrelevant per the spec. + * + * For Symmetric Flow Control: + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | DC | 1 | DC | E1000_fc_full + * + */ + if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) { + /* Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise Rx + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == e1000_fc_full) { + hw->fc.current_mode = e1000_fc_full; + DEBUGOUT("Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = e1000_fc_rx_pause; + DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } + } + /* For receiving PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + */ + else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_tx_pause; + DEBUGOUT("Flow Control = Tx PAUSE frames only.\n"); + } + /* For transmitting PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + */ + else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_rx_pause; + DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } else { + /* Per the IEEE spec, at this point flow control + * should be disabled. + */ + hw->fc.current_mode = e1000_fc_none; + DEBUGOUT("Flow Control = NONE.\n"); + } + + /* Now we need to do one last check... If we auto- + * negotiated to HALF DUPLEX, flow control should not be + * enabled per IEEE 802.3 spec. + */ + ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex); + if (ret_val) { + DEBUGOUT("Error getting link speed and duplex\n"); + return ret_val; + } + + if (duplex == HALF_DUPLEX) + hw->fc.current_mode = e1000_fc_none; + + /* Now we call a subroutine to actually force the MAC + * controller to use the correct flow control settings. + */ + ret_val = e1000_force_mac_fc_generic(hw); + if (ret_val) { + DEBUGOUT("Error forcing flow control settings\n"); + return ret_val; + } + } + + /* Check for the case where we have SerDes media and auto-neg is + * enabled. In this case, we need to check and see if Auto-Neg + * has completed, and if so, how the PHY and link partner has + * flow control configured. + */ + if ((hw->phy.media_type == e1000_media_type_internal_serdes) && + mac->autoneg) { + /* Read the PCS_LSTS and check to see if AutoNeg + * has completed. + */ + pcs_status_reg = E1000_READ_REG(hw, E1000_PCS_LSTAT); + + if (!(pcs_status_reg & E1000_PCS_LSTS_AN_COMPLETE)) { + DEBUGOUT("PCS Auto Neg has not completed.\n"); + return ret_val; + } + + /* The AutoNeg process has completed, so we now need to + * read both the Auto Negotiation Advertisement + * Register (PCS_ANADV) and the Auto_Negotiation Base + * Page Ability Register (PCS_LPAB) to determine how + * flow control was negotiated. + */ + pcs_adv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV); + pcs_lp_ability_reg = E1000_READ_REG(hw, E1000_PCS_LPAB); + + /* Two bits in the Auto Negotiation Advertisement Register + * (PCS_ANADV) and two bits in the Auto Negotiation Base + * Page Ability Register (PCS_LPAB) determine flow control + * for both the PHY and the link partner. The following + * table, taken out of the IEEE 802.3ab/D6.0 dated March 25, + * 1999, describes these PAUSE resolution bits and how flow + * control is determined based upon these settings. + * NOTE: DC = Don't Care + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution + *-------|---------|-------|---------|-------------------- + * 0 | 0 | DC | DC | e1000_fc_none + * 0 | 1 | 0 | DC | e1000_fc_none + * 0 | 1 | 1 | 0 | e1000_fc_none + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 1 | 0 | 0 | DC | e1000_fc_none + * 1 | DC | 1 | DC | e1000_fc_full + * 1 | 1 | 0 | 0 | e1000_fc_none + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * + * Are both PAUSE bits set to 1? If so, this implies + * Symmetric Flow Control is enabled at both ends. The + * ASM_DIR bits are irrelevant per the spec. + * + * For Symmetric Flow Control: + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | DC | 1 | DC | e1000_fc_full + * + */ + if ((pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_PAUSE)) { + /* Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise Rx + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == e1000_fc_full) { + hw->fc.current_mode = e1000_fc_full; + DEBUGOUT("Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = e1000_fc_rx_pause; + DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } + } + /* For receiving PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + */ + else if (!(pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_adv_reg & E1000_TXCW_ASM_DIR) && + (pcs_lp_ability_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_tx_pause; + DEBUGOUT("Flow Control = Tx PAUSE frames only.\n"); + } + /* For transmitting PAUSE frames ONLY. + * + * LOCAL DEVICE | LINK PARTNER + * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result + *-------|---------|-------|---------|-------------------- + * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + */ + else if ((pcs_adv_reg & E1000_TXCW_PAUSE) && + (pcs_adv_reg & E1000_TXCW_ASM_DIR) && + !(pcs_lp_ability_reg & E1000_TXCW_PAUSE) && + (pcs_lp_ability_reg & E1000_TXCW_ASM_DIR)) { + hw->fc.current_mode = e1000_fc_rx_pause; + DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } else { + /* Per the IEEE spec, at this point flow control + * should be disabled. + */ + hw->fc.current_mode = e1000_fc_none; + DEBUGOUT("Flow Control = NONE.\n"); + } + + /* Now we call a subroutine to actually force the MAC + * controller to use the correct flow control settings. + */ + pcs_ctrl_reg = E1000_READ_REG(hw, E1000_PCS_LCTL); + pcs_ctrl_reg |= E1000_PCS_LCTL_FORCE_FCTRL; + E1000_WRITE_REG(hw, E1000_PCS_LCTL, pcs_ctrl_reg); + + ret_val = e1000_force_mac_fc_generic(hw); + if (ret_val) { + DEBUGOUT("Error forcing flow control settings\n"); + return ret_val; + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_get_speed_and_duplex_copper_generic - Retrieve current speed/duplex + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * Read the status register for the current speed/duplex and store the current + * speed and duplex for copper connections. + **/ +s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + u32 status; + + DEBUGFUNC("e1000_get_speed_and_duplex_copper_generic"); + + status = E1000_READ_REG(hw, E1000_STATUS); + if (status & E1000_STATUS_SPEED_1000) { + *speed = SPEED_1000; + DEBUGOUT("1000 Mbs, "); + } else if (status & E1000_STATUS_SPEED_100) { + *speed = SPEED_100; + DEBUGOUT("100 Mbs, "); + } else { + *speed = SPEED_10; + DEBUGOUT("10 Mbs, "); + } + + if (status & E1000_STATUS_FD) { + *duplex = FULL_DUPLEX; + DEBUGOUT("Full Duplex\n"); + } else { + *duplex = HALF_DUPLEX; + DEBUGOUT("Half Duplex\n"); + } + + return E1000_SUCCESS; +} + +/** + * e1000_get_speed_and_duplex_fiber_generic - Retrieve current speed/duplex + * @hw: pointer to the HW structure + * @speed: stores the current speed + * @duplex: stores the current duplex + * + * Sets the speed and duplex to gigabit full duplex (the only possible option) + * for fiber/serdes links. + **/ +s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw E1000_UNUSEDARG *hw, + u16 *speed, u16 *duplex) +{ + DEBUGFUNC("e1000_get_speed_and_duplex_fiber_serdes_generic"); + + *speed = SPEED_1000; + *duplex = FULL_DUPLEX; + + return E1000_SUCCESS; +} + +/** + * e1000_get_hw_semaphore_generic - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore to access the PHY or NVM + **/ +s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw) +{ + u32 swsm; + s32 timeout = hw->nvm.word_size + 1; + s32 i = 0; + + DEBUGFUNC("e1000_get_hw_semaphore_generic"); + + /* Get the SW semaphore */ + while (i < timeout) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + if (!(swsm & E1000_SWSM_SMBI)) + break; + + usec_delay(50); + i++; + } + + if (i == timeout) { + DEBUGOUT("Driver can't access device - SMBI bit is set.\n"); + return -E1000_ERR_NVM; + } + + /* Get the FW semaphore. */ + for (i = 0; i < timeout; i++) { + swsm = E1000_READ_REG(hw, E1000_SWSM); + E1000_WRITE_REG(hw, E1000_SWSM, swsm | E1000_SWSM_SWESMBI); + + /* Semaphore acquired if bit latched */ + if (E1000_READ_REG(hw, E1000_SWSM) & E1000_SWSM_SWESMBI) + break; + + usec_delay(50); + } + + if (i == timeout) { + /* Release semaphores */ + e1000_put_hw_semaphore_generic(hw); + DEBUGOUT("Driver can't access the NVM\n"); + return -E1000_ERR_NVM; + } + + return E1000_SUCCESS; +} + +/** + * e1000_put_hw_semaphore_generic - Release hardware semaphore + * @hw: pointer to the HW structure + * + * Release hardware semaphore used to access the PHY or NVM + **/ +void e1000_put_hw_semaphore_generic(struct e1000_hw *hw) +{ + u32 swsm; + + DEBUGFUNC("e1000_put_hw_semaphore_generic"); + + swsm = E1000_READ_REG(hw, E1000_SWSM); + + swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); + + E1000_WRITE_REG(hw, E1000_SWSM, swsm); +} + +/** + * e1000_get_auto_rd_done_generic - Check for auto read completion + * @hw: pointer to the HW structure + * + * Check EEPROM for Auto Read done bit. + **/ +s32 e1000_get_auto_rd_done_generic(struct e1000_hw *hw) +{ + s32 i = 0; + + DEBUGFUNC("e1000_get_auto_rd_done_generic"); + + while (i < AUTO_READ_DONE_TIMEOUT) { + if (E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_AUTO_RD) + break; + msec_delay(1); + i++; + } + + if (i == AUTO_READ_DONE_TIMEOUT) { + DEBUGOUT("Auto read by HW from NVM has not completed.\n"); + return -E1000_ERR_RESET; + } + + return E1000_SUCCESS; +} + +/** + * e1000_valid_led_default_generic - Verify a valid default LED config + * @hw: pointer to the HW structure + * @data: pointer to the NVM (EEPROM) + * + * Read the EEPROM for the current default LED configuration. If the + * LED configuration is not valid, set to a valid LED configuration. + **/ +s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_valid_led_default_generic"); + + ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) + *data = ID_LED_DEFAULT; + + return E1000_SUCCESS; +} + +/** + * e1000_id_led_init_generic - + * @hw: pointer to the HW structure + * + **/ +s32 e1000_id_led_init_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val; + const u32 ledctl_mask = 0x000000FF; + const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON; + const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF; + u16 data, i, temp; + const u16 led_mask = 0x0F; + + DEBUGFUNC("e1000_id_led_init_generic"); + + ret_val = hw->nvm.ops.valid_led_default(hw, &data); + if (ret_val) + return ret_val; + + mac->ledctl_default = E1000_READ_REG(hw, E1000_LEDCTL); + mac->ledctl_mode1 = mac->ledctl_default; + mac->ledctl_mode2 = mac->ledctl_default; + + for (i = 0; i < 4; i++) { + temp = (data >> (i << 2)) & led_mask; + switch (temp) { + case ID_LED_ON1_DEF2: + case ID_LED_ON1_ON2: + case ID_LED_ON1_OFF2: + mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode1 |= ledctl_on << (i << 3); + break; + case ID_LED_OFF1_DEF2: + case ID_LED_OFF1_ON2: + case ID_LED_OFF1_OFF2: + mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode1 |= ledctl_off << (i << 3); + break; + default: + /* Do nothing */ + break; + } + switch (temp) { + case ID_LED_DEF1_ON2: + case ID_LED_ON1_ON2: + case ID_LED_OFF1_ON2: + mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode2 |= ledctl_on << (i << 3); + break; + case ID_LED_DEF1_OFF2: + case ID_LED_ON1_OFF2: + case ID_LED_OFF1_OFF2: + mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3)); + mac->ledctl_mode2 |= ledctl_off << (i << 3); + break; + default: + /* Do nothing */ + break; + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_setup_led_generic - Configures SW controllable LED + * @hw: pointer to the HW structure + * + * This prepares the SW controllable LED for use and saves the current state + * of the LED so it can be later restored. + **/ +s32 e1000_setup_led_generic(struct e1000_hw *hw) +{ + u32 ledctl; + + DEBUGFUNC("e1000_setup_led_generic"); + + if (hw->mac.ops.setup_led != e1000_setup_led_generic) + return -E1000_ERR_CONFIG; + + if (hw->phy.media_type == e1000_media_type_fiber) { + ledctl = E1000_READ_REG(hw, E1000_LEDCTL); + hw->mac.ledctl_default = ledctl; + /* Turn off LED0 */ + ledctl &= ~(E1000_LEDCTL_LED0_IVRT | E1000_LEDCTL_LED0_BLINK | + E1000_LEDCTL_LED0_MODE_MASK); + ledctl |= (E1000_LEDCTL_MODE_LED_OFF << + E1000_LEDCTL_LED0_MODE_SHIFT); + E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl); + } else if (hw->phy.media_type == e1000_media_type_copper) { + E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1); + } + + return E1000_SUCCESS; +} + +/** + * e1000_cleanup_led_generic - Set LED config to default operation + * @hw: pointer to the HW structure + * + * Remove the current LED configuration and set the LED configuration + * to the default value, saved from the EEPROM. + **/ +s32 e1000_cleanup_led_generic(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_cleanup_led_generic"); + + E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_default); + return E1000_SUCCESS; +} + +/** + * e1000_blink_led_generic - Blink LED + * @hw: pointer to the HW structure + * + * Blink the LEDs which are set to be on. + **/ +s32 e1000_blink_led_generic(struct e1000_hw *hw) +{ + u32 ledctl_blink = 0; + u32 i; + + DEBUGFUNC("e1000_blink_led_generic"); + + if (hw->phy.media_type == e1000_media_type_fiber) { + /* always blink LED0 for PCI-E fiber */ + ledctl_blink = E1000_LEDCTL_LED0_BLINK | + (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT); + } else { + /* Set the blink bit for each LED that's "on" (0x0E) + * (or "off" if inverted) in ledctl_mode2. The blink + * logic in hardware only works when mode is set to "on" + * so it must be changed accordingly when the mode is + * "off" and inverted. + */ + ledctl_blink = hw->mac.ledctl_mode2; + for (i = 0; i < 32; i += 8) { + u32 mode = (hw->mac.ledctl_mode2 >> i) & + E1000_LEDCTL_LED0_MODE_MASK; + u32 led_default = hw->mac.ledctl_default >> i; + + if ((!(led_default & E1000_LEDCTL_LED0_IVRT) && + (mode == E1000_LEDCTL_MODE_LED_ON)) || + ((led_default & E1000_LEDCTL_LED0_IVRT) && + (mode == E1000_LEDCTL_MODE_LED_OFF))) { + ledctl_blink &= + ~(E1000_LEDCTL_LED0_MODE_MASK << i); + ledctl_blink |= (E1000_LEDCTL_LED0_BLINK | + E1000_LEDCTL_MODE_LED_ON) << i; + } + } + } + + E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl_blink); + + return E1000_SUCCESS; +} + +/** + * e1000_led_on_generic - Turn LED on + * @hw: pointer to the HW structure + * + * Turn LED on. + **/ +s32 e1000_led_on_generic(struct e1000_hw *hw) +{ + u32 ctrl; + + DEBUGFUNC("e1000_led_on_generic"); + + switch (hw->phy.media_type) { + case e1000_media_type_fiber: + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl &= ~E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + break; + case e1000_media_type_copper: + E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode2); + break; + default: + break; + } + + return E1000_SUCCESS; +} + +/** + * e1000_led_off_generic - Turn LED off + * @hw: pointer to the HW structure + * + * Turn LED off. + **/ +s32 e1000_led_off_generic(struct e1000_hw *hw) +{ + u32 ctrl; + + DEBUGFUNC("e1000_led_off_generic"); + + switch (hw->phy.media_type) { + case e1000_media_type_fiber: + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= E1000_CTRL_SWDPIN0; + ctrl |= E1000_CTRL_SWDPIO0; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + break; + case e1000_media_type_copper: + E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1); + break; + default: + break; + } + + return E1000_SUCCESS; +} + +/** + * e1000_set_pcie_no_snoop_generic - Set PCI-express capabilities + * @hw: pointer to the HW structure + * @no_snoop: bitmap of snoop events + * + * Set the PCI-express register to snoop for events enabled in 'no_snoop'. + **/ +void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop) +{ + u32 gcr; + + DEBUGFUNC("e1000_set_pcie_no_snoop_generic"); + + if (no_snoop) { + gcr = E1000_READ_REG(hw, E1000_GCR); + gcr &= ~(PCIE_NO_SNOOP_ALL); + gcr |= no_snoop; + E1000_WRITE_REG(hw, E1000_GCR, gcr); + } +} + +/** + * e1000_disable_pcie_master_generic - Disables PCI-express master access + * @hw: pointer to the HW structure + * + * Returns E1000_SUCCESS if successful, else returns -10 + * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused + * the master requests to be disabled. + * + * Disables PCI-Express master access and verifies there are no pending + * requests. + **/ +s32 e1000_disable_pcie_master_generic(struct e1000_hw *hw) +{ + u32 ctrl; + s32 timeout = MASTER_DISABLE_TIMEOUT; + + DEBUGFUNC("e1000_disable_pcie_master_generic"); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + while (timeout) { + if (!(E1000_READ_REG(hw, E1000_STATUS) & + E1000_STATUS_GIO_MASTER_ENABLE)) + break; + usec_delay(100); + timeout--; + } + + if (!timeout) { + DEBUGOUT("Master requests are pending.\n"); + return -E1000_ERR_MASTER_REQUESTS_PENDING; + } + + return E1000_SUCCESS; +} + +/** + * e1000_reset_adaptive_generic - Reset Adaptive Interframe Spacing + * @hw: pointer to the HW structure + * + * Reset the Adaptive Interframe Spacing throttle to default values. + **/ +void e1000_reset_adaptive_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + + DEBUGFUNC("e1000_reset_adaptive_generic"); + + if (!mac->adaptive_ifs) { + DEBUGOUT("Not in Adaptive IFS mode!\n"); + return; + } + + mac->current_ifs_val = 0; + mac->ifs_min_val = IFS_MIN; + mac->ifs_max_val = IFS_MAX; + mac->ifs_step_size = IFS_STEP; + mac->ifs_ratio = IFS_RATIO; + + mac->in_ifs_mode = false; + E1000_WRITE_REG(hw, E1000_AIT, 0); +} + +/** + * e1000_update_adaptive_generic - Update Adaptive Interframe Spacing + * @hw: pointer to the HW structure + * + * Update the Adaptive Interframe Spacing Throttle value based on the + * time between transmitted packets and time between collisions. + **/ +void e1000_update_adaptive_generic(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + + DEBUGFUNC("e1000_update_adaptive_generic"); + + if (!mac->adaptive_ifs) { + DEBUGOUT("Not in Adaptive IFS mode!\n"); + return; + } + + if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) { + if (mac->tx_packet_delta > MIN_NUM_XMITS) { + mac->in_ifs_mode = true; + if (mac->current_ifs_val < mac->ifs_max_val) { + if (!mac->current_ifs_val) + mac->current_ifs_val = mac->ifs_min_val; + else + mac->current_ifs_val += + mac->ifs_step_size; + E1000_WRITE_REG(hw, E1000_AIT, + mac->current_ifs_val); + } + } + } else { + if (mac->in_ifs_mode && + (mac->tx_packet_delta <= MIN_NUM_XMITS)) { + mac->current_ifs_val = 0; + mac->in_ifs_mode = false; + E1000_WRITE_REG(hw, E1000_AIT, 0); + } + } +} + +/** + * e1000_validate_mdi_setting_generic - Verify MDI/MDIx settings + * @hw: pointer to the HW structure + * + * Verify that when not using auto-negotiation that MDI/MDIx is correctly + * set, which is forced to MDI mode only. + **/ +static s32 e1000_validate_mdi_setting_generic(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_validate_mdi_setting_generic"); + + if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) { + DEBUGOUT("Invalid MDI setting detected\n"); + hw->phy.mdix = 1; + return -E1000_ERR_CONFIG; + } + + return E1000_SUCCESS; +} + +/** + * e1000_validate_mdi_setting_crossover_generic - Verify MDI/MDIx settings + * @hw: pointer to the HW structure + * + * Validate the MDI/MDIx setting, allowing for auto-crossover during forced + * operation. + **/ +s32 e1000_validate_mdi_setting_crossover_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_validate_mdi_setting_crossover_generic"); + + return E1000_SUCCESS; +} + +/** + * e1000_write_8bit_ctrl_reg_generic - Write a 8bit CTRL register + * @hw: pointer to the HW structure + * @reg: 32bit register offset such as E1000_SCTL + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes an address/data control type register. There are several of these + * and they all have the format address << 8 | data and bit 31 is polled for + * completion. + **/ +s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg, + u32 offset, u8 data) +{ + u32 i, regvalue = 0; + + DEBUGFUNC("e1000_write_8bit_ctrl_reg_generic"); + + /* Set up the address and data */ + regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT); + E1000_WRITE_REG(hw, reg, regvalue); + + /* Poll the ready bit to see if the MDI read completed */ + for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) { + usec_delay(5); + regvalue = E1000_READ_REG(hw, reg); + if (regvalue & E1000_GEN_CTL_READY) + break; + } + if (!(regvalue & E1000_GEN_CTL_READY)) { + DEBUGOUT1("Reg %08x did not indicate ready\n", reg); + return -E1000_ERR_PHY; + } + + return E1000_SUCCESS; +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_mac.h b/kernel/linux/kni/ethtool/igb/e1000_mac.h new file mode 100644 index 00000000..a3e78498 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_mac.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_MAC_H_ +#define _E1000_MAC_H_ + +void e1000_init_mac_ops_generic(struct e1000_hw *hw); +void e1000_null_mac_generic(struct e1000_hw *hw); +s32 e1000_null_ops_generic(struct e1000_hw *hw); +s32 e1000_null_link_info(struct e1000_hw *hw, u16 *s, u16 *d); +bool e1000_null_mng_mode(struct e1000_hw *hw); +void e1000_null_update_mc(struct e1000_hw *hw, u8 *h, u32 a); +void e1000_null_write_vfta(struct e1000_hw *hw, u32 a, u32 b); +void e1000_null_rar_set(struct e1000_hw *hw, u8 *h, u32 a); +s32 e1000_blink_led_generic(struct e1000_hw *hw); +s32 e1000_check_for_copper_link_generic(struct e1000_hw *hw); +s32 e1000_check_for_fiber_link_generic(struct e1000_hw *hw); +s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw); +s32 e1000_cleanup_led_generic(struct e1000_hw *hw); +s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw); +s32 e1000_disable_pcie_master_generic(struct e1000_hw *hw); +s32 e1000_force_mac_fc_generic(struct e1000_hw *hw); +s32 e1000_get_auto_rd_done_generic(struct e1000_hw *hw); +s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw); +void e1000_set_lan_id_single_port(struct e1000_hw *hw); +s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw); +s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw *hw, + u16 *speed, u16 *duplex); +s32 e1000_id_led_init_generic(struct e1000_hw *hw); +s32 e1000_led_on_generic(struct e1000_hw *hw); +s32 e1000_led_off_generic(struct e1000_hw *hw); +void e1000_update_mc_addr_list_generic(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count); +s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw); +s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw); +s32 e1000_setup_led_generic(struct e1000_hw *hw); +s32 e1000_setup_link_generic(struct e1000_hw *hw); +s32 e1000_validate_mdi_setting_crossover_generic(struct e1000_hw *hw); +s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg, + u32 offset, u8 data); + +u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr); + +void e1000_clear_hw_cntrs_base_generic(struct e1000_hw *hw); +void e1000_clear_vfta_generic(struct e1000_hw *hw); +void e1000_init_rx_addrs_generic(struct e1000_hw *hw, u16 rar_count); +void e1000_put_hw_semaphore_generic(struct e1000_hw *hw); +s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw); +void e1000_reset_adaptive_generic(struct e1000_hw *hw); +void e1000_set_pcie_no_snoop_generic(struct e1000_hw *hw, u32 no_snoop); +void e1000_update_adaptive_generic(struct e1000_hw *hw); +void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value); + +#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_manage.c b/kernel/linux/kni/ethtool/igb/e1000_manage.c new file mode 100644 index 00000000..2f75bc35 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_manage.c @@ -0,0 +1,539 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_api.h" + +/** + * e1000_calculate_checksum - Calculate checksum for buffer + * @buffer: pointer to EEPROM + * @length: size of EEPROM to calculate a checksum for + * + * Calculates the checksum for some buffer on a specified length. The + * checksum calculated is returned. + **/ +u8 e1000_calculate_checksum(u8 *buffer, u32 length) +{ + u32 i; + u8 sum = 0; + + DEBUGFUNC("e1000_calculate_checksum"); + + if (!buffer) + return 0; + + for (i = 0; i < length; i++) + sum += buffer[i]; + + return (u8) (0 - sum); +} + +/** + * e1000_mng_enable_host_if_generic - Checks host interface is enabled + * @hw: pointer to the HW structure + * + * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND + * + * This function checks whether the HOST IF is enabled for command operation + * and also checks whether the previous command is completed. It busy waits + * in case of previous command is not completed. + **/ +s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw) +{ + u32 hicr; + u8 i; + + DEBUGFUNC("e1000_mng_enable_host_if_generic"); + + if (!hw->mac.arc_subsystem_valid) { + DEBUGOUT("ARC subsystem not valid.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Check that the host interface is enabled. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_EN)) { + DEBUGOUT("E1000_HOST_EN bit disabled.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + /* check the previous command is completed */ + for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_C)) + break; + msec_delay_irq(1); + } + + if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { + DEBUGOUT("Previous command timeout failed .\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + return E1000_SUCCESS; +} + +/** + * e1000_check_mng_mode_generic - Generic check management mode + * @hw: pointer to the HW structure + * + * Reads the firmware semaphore register and returns true (>0) if + * manageability is enabled, else false (0). + **/ +bool e1000_check_mng_mode_generic(struct e1000_hw *hw) +{ + u32 fwsm = E1000_READ_REG(hw, E1000_FWSM); + + DEBUGFUNC("e1000_check_mng_mode_generic"); + + + return (fwsm & E1000_FWSM_MODE_MASK) == + (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); +} + +/** + * e1000_enable_tx_pkt_filtering_generic - Enable packet filtering on Tx + * @hw: pointer to the HW structure + * + * Enables packet filtering on transmit packets if manageability is enabled + * and host interface is enabled. + **/ +bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw) +{ + struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie; + u32 *buffer = (u32 *)&hw->mng_cookie; + u32 offset; + s32 ret_val, hdr_csum, csum; + u8 i, len; + + DEBUGFUNC("e1000_enable_tx_pkt_filtering_generic"); + + hw->mac.tx_pkt_filtering = true; + + /* No manageability, no filtering */ + if (!hw->mac.ops.check_mng_mode(hw)) { + hw->mac.tx_pkt_filtering = false; + return hw->mac.tx_pkt_filtering; + } + + /* If we can't read from the host interface for whatever + * reason, disable filtering. + */ + ret_val = e1000_mng_enable_host_if_generic(hw); + if (ret_val != E1000_SUCCESS) { + hw->mac.tx_pkt_filtering = false; + return hw->mac.tx_pkt_filtering; + } + + /* Read in the header. Length and offset are in dwords. */ + len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2; + offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2; + for (i = 0; i < len; i++) + *(buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, + offset + i); + hdr_csum = hdr->checksum; + hdr->checksum = 0; + csum = e1000_calculate_checksum((u8 *)hdr, + E1000_MNG_DHCP_COOKIE_LENGTH); + /* If either the checksums or signature don't match, then + * the cookie area isn't considered valid, in which case we + * take the safe route of assuming Tx filtering is enabled. + */ + if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { + hw->mac.tx_pkt_filtering = true; + return hw->mac.tx_pkt_filtering; + } + + /* Cookie area is valid, make the final check for filtering. */ + if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) + hw->mac.tx_pkt_filtering = false; + + return hw->mac.tx_pkt_filtering; +} + +/** + * e1000_mng_write_cmd_header_generic - Writes manageability command header + * @hw: pointer to the HW structure + * @hdr: pointer to the host interface command header + * + * Writes the command header after does the checksum calculation. + **/ +s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr) +{ + u16 i, length = sizeof(struct e1000_host_mng_command_header); + + DEBUGFUNC("e1000_mng_write_cmd_header_generic"); + + /* Write the whole command header structure with new checksum. */ + + hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length); + + length >>= 2; + /* Write the relevant command block into the ram area. */ + for (i = 0; i < length; i++) { + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i, + *((u32 *) hdr + i)); + E1000_WRITE_FLUSH(hw); + } + + return E1000_SUCCESS; +} + +/** + * e1000_mng_host_if_write_generic - Write to the manageability host interface + * @hw: pointer to the HW structure + * @buffer: pointer to the host interface buffer + * @length: size of the buffer + * @offset: location in the buffer to write to + * @sum: sum of the data (not checksum) + * + * This function writes the buffer content at the offset given on the host if. + * It also does alignment considerations to do the writes in most efficient + * way. Also fills up the sum of the buffer in *buffer parameter. + **/ +s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer, + u16 length, u16 offset, u8 *sum) +{ + u8 *tmp; + u8 *bufptr = buffer; + u32 data = 0; + u16 remaining, i, j, prev_bytes; + + DEBUGFUNC("e1000_mng_host_if_write_generic"); + + /* sum = only sum of the data and it is not checksum */ + + if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) + return -E1000_ERR_PARAM; + + tmp = (u8 *)&data; + prev_bytes = offset & 0x3; + offset >>= 2; + + if (prev_bytes) { + data = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset); + for (j = prev_bytes; j < sizeof(u32); j++) { + *(tmp + j) = *bufptr++; + *sum += *(tmp + j); + } + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset, data); + length -= j - prev_bytes; + offset++; + } + + remaining = length & 0x3; + length -= remaining; + + /* Calculate length in DWORDs */ + length >>= 2; + + /* The device driver writes the relevant command block into the + * ram area. + */ + for (i = 0; i < length; i++) { + for (j = 0; j < sizeof(u32); j++) { + *(tmp + j) = *bufptr++; + *sum += *(tmp + j); + } + + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i, + data); + } + if (remaining) { + for (j = 0; j < sizeof(u32); j++) { + if (j < remaining) + *(tmp + j) = *bufptr++; + else + *(tmp + j) = 0; + + *sum += *(tmp + j); + } + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i, + data); + } + + return E1000_SUCCESS; +} + +/** + * e1000_mng_write_dhcp_info_generic - Writes DHCP info to host interface + * @hw: pointer to the HW structure + * @buffer: pointer to the host interface + * @length: size of the buffer + * + * Writes the DHCP information to the host interface. + **/ +s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, u8 *buffer, + u16 length) +{ + struct e1000_host_mng_command_header hdr; + s32 ret_val; + u32 hicr; + + DEBUGFUNC("e1000_mng_write_dhcp_info_generic"); + + hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; + hdr.command_length = length; + hdr.reserved1 = 0; + hdr.reserved2 = 0; + hdr.checksum = 0; + + /* Enable the host interface */ + ret_val = e1000_mng_enable_host_if_generic(hw); + if (ret_val) + return ret_val; + + /* Populate the host interface with the contents of "buffer". */ + ret_val = e1000_mng_host_if_write_generic(hw, buffer, length, + sizeof(hdr), &(hdr.checksum)); + if (ret_val) + return ret_val; + + /* Write the manageability command header */ + ret_val = e1000_mng_write_cmd_header_generic(hw, &hdr); + if (ret_val) + return ret_val; + + /* Tell the ARC a new command is pending. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); + + return E1000_SUCCESS; +} + +/** + * e1000_enable_mng_pass_thru - Check if management passthrough is needed + * @hw: pointer to the HW structure + * + * Verifies the hardware needs to leave interface enabled so that frames can + * be directed to and from the management interface. + **/ +bool e1000_enable_mng_pass_thru(struct e1000_hw *hw) +{ + u32 manc; + u32 fwsm, factps; + + DEBUGFUNC("e1000_enable_mng_pass_thru"); + + if (!hw->mac.asf_firmware_present) + return false; + + manc = E1000_READ_REG(hw, E1000_MANC); + + if (!(manc & E1000_MANC_RCV_TCO_EN)) + return false; + + if (hw->mac.has_fwsm) { + fwsm = E1000_READ_REG(hw, E1000_FWSM); + factps = E1000_READ_REG(hw, E1000_FACTPS); + + if (!(factps & E1000_FACTPS_MNGCG) && + ((fwsm & E1000_FWSM_MODE_MASK) == + (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) + return true; + } else if ((manc & E1000_MANC_SMBUS_EN) && + !(manc & E1000_MANC_ASF_EN)) { + return true; + } + + return false; +} + +/** + * e1000_host_interface_command - Writes buffer to host interface + * @hw: pointer to the HW structure + * @buffer: contains a command to write + * @length: the byte length of the buffer, must be multiple of 4 bytes + * + * Writes a buffer to the Host Interface. Upon success, returns E1000_SUCCESS + * else returns E1000_ERR_HOST_INTERFACE_COMMAND. + **/ +s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length) +{ + u32 hicr, i; + + DEBUGFUNC("e1000_host_interface_command"); + + if (!(hw->mac.arc_subsystem_valid)) { + DEBUGOUT("Hardware doesn't support host interface command.\n"); + return E1000_SUCCESS; + } + + if (!hw->mac.asf_firmware_present) { + DEBUGOUT("Firmware is not present.\n"); + return E1000_SUCCESS; + } + + if (length == 0 || length & 0x3 || + length > E1000_HI_MAX_BLOCK_BYTE_LENGTH) { + DEBUGOUT("Buffer length failure.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Check that the host interface is enabled. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_EN)) { + DEBUGOUT("E1000_HOST_EN bit disabled.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Calculate length in DWORDs */ + length >>= 2; + + /* The device driver writes the relevant command block + * into the ram area. + */ + for (i = 0; i < length; i++) + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i, + *((u32 *)buffer + i)); + + /* Setting this bit tells the ARC that a new command is pending. */ + E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); + + for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_C)) + break; + msec_delay(1); + } + + /* Check command successful completion. */ + if (i == E1000_HI_COMMAND_TIMEOUT || + (!(E1000_READ_REG(hw, E1000_HICR) & E1000_HICR_SV))) { + DEBUGOUT("Command has failed with no status valid.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + for (i = 0; i < length; i++) + *((u32 *)buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, + E1000_HOST_IF, + i); + + return E1000_SUCCESS; +} +/** + * e1000_load_firmware - Writes proxy FW code buffer to host interface + * and execute. + * @hw: pointer to the HW structure + * @buffer: contains a firmware to write + * @length: the byte length of the buffer, must be multiple of 4 bytes + * + * Upon success returns E1000_SUCCESS, returns E1000_ERR_CONFIG if not enabled + * in HW else returns E1000_ERR_HOST_INTERFACE_COMMAND. + **/ +s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length) +{ + u32 hicr, hibba, fwsm, icr, i; + + DEBUGFUNC("e1000_load_firmware"); + + if (hw->mac.type < e1000_i210) { + DEBUGOUT("Hardware doesn't support loading FW by the driver\n"); + return -E1000_ERR_CONFIG; + } + + /* Check that the host interface is enabled. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_EN)) { + DEBUGOUT("E1000_HOST_EN bit disabled.\n"); + return -E1000_ERR_CONFIG; + } + if (!(hicr & E1000_HICR_MEMORY_BASE_EN)) { + DEBUGOUT("E1000_HICR_MEMORY_BASE_EN bit disabled.\n"); + return -E1000_ERR_CONFIG; + } + + if (length == 0 || length & 0x3 || length > E1000_HI_FW_MAX_LENGTH) { + DEBUGOUT("Buffer length failure.\n"); + return -E1000_ERR_INVALID_ARGUMENT; + } + + /* Clear notification from ROM-FW by reading ICR register */ + icr = E1000_READ_REG(hw, E1000_ICR_V2); + + /* Reset ROM-FW */ + hicr = E1000_READ_REG(hw, E1000_HICR); + hicr |= E1000_HICR_FW_RESET_ENABLE; + E1000_WRITE_REG(hw, E1000_HICR, hicr); + hicr |= E1000_HICR_FW_RESET; + E1000_WRITE_REG(hw, E1000_HICR, hicr); + E1000_WRITE_FLUSH(hw); + + /* Wait till MAC notifies about its readiness after ROM-FW reset */ + for (i = 0; i < (E1000_HI_COMMAND_TIMEOUT * 2); i++) { + icr = E1000_READ_REG(hw, E1000_ICR_V2); + if (icr & E1000_ICR_MNG) + break; + msec_delay(1); + } + + /* Check for timeout */ + if (i == E1000_HI_COMMAND_TIMEOUT) { + DEBUGOUT("FW reset failed.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Wait till MAC is ready to accept new FW code */ + for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { + fwsm = E1000_READ_REG(hw, E1000_FWSM); + if ((fwsm & E1000_FWSM_FW_VALID) && + ((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT == + E1000_FWSM_HI_EN_ONLY_MODE)) + break; + msec_delay(1); + } + + /* Check for timeout */ + if (i == E1000_HI_COMMAND_TIMEOUT) { + DEBUGOUT("FW reset failed.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + /* Calculate length in DWORDs */ + length >>= 2; + + /* The device driver writes the relevant FW code block + * into the ram area in DWORDs via 1kB ram addressing window. + */ + for (i = 0; i < length; i++) { + if (!(i % E1000_HI_FW_BLOCK_DWORD_LENGTH)) { + /* Point to correct 1kB ram window */ + hibba = E1000_HI_FW_BASE_ADDRESS + + ((E1000_HI_FW_BLOCK_DWORD_LENGTH << 2) * + (i / E1000_HI_FW_BLOCK_DWORD_LENGTH)); + + E1000_WRITE_REG(hw, E1000_HIBBA, hibba); + } + + E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, + i % E1000_HI_FW_BLOCK_DWORD_LENGTH, + *((u32 *)buffer + i)); + } + + /* Setting this bit tells the ARC that a new FW is ready to execute. */ + hicr = E1000_READ_REG(hw, E1000_HICR); + E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); + + for (i = 0; i < E1000_HI_COMMAND_TIMEOUT; i++) { + hicr = E1000_READ_REG(hw, E1000_HICR); + if (!(hicr & E1000_HICR_C)) + break; + msec_delay(1); + } + + /* Check for successful FW start. */ + if (i == E1000_HI_COMMAND_TIMEOUT) { + DEBUGOUT("New FW did not start within timeout period.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + + return E1000_SUCCESS; +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_manage.h b/kernel/linux/kni/ethtool/igb/e1000_manage.h new file mode 100644 index 00000000..9f27b934 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_manage.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_MANAGE_H_ +#define _E1000_MANAGE_H_ + +bool e1000_check_mng_mode_generic(struct e1000_hw *hw); +bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw); +s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw); +s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer, + u16 length, u16 offset, u8 *sum); +s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr); +s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, + u8 *buffer, u16 length); +bool e1000_enable_mng_pass_thru(struct e1000_hw *hw); +u8 e1000_calculate_checksum(u8 *buffer, u32 length); +s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length); +s32 e1000_load_firmware(struct e1000_hw *hw, u8 *buffer, u32 length); + +enum e1000_mng_mode { + e1000_mng_mode_none = 0, + e1000_mng_mode_asf, + e1000_mng_mode_pt, + e1000_mng_mode_ipmi, + e1000_mng_mode_host_if_only +}; + +#define E1000_FACTPS_MNGCG 0x20000000 + +#define E1000_FWSM_MODE_MASK 0xE +#define E1000_FWSM_MODE_SHIFT 1 +#define E1000_FWSM_FW_VALID 0x00008000 +#define E1000_FWSM_HI_EN_ONLY_MODE 0x4 + +#define E1000_MNG_IAMT_MODE 0x3 +#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 +#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 +#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 +#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 +#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1 +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 + +#define E1000_VFTA_ENTRY_SHIFT 5 +#define E1000_VFTA_ENTRY_MASK 0x7F +#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F + +#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */ +#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */ +#define E1000_HI_COMMAND_TIMEOUT 500 /* Process HI cmd limit */ +#define E1000_HI_FW_BASE_ADDRESS 0x10000 +#define E1000_HI_FW_MAX_LENGTH (64 * 1024) /* Num of bytes */ +#define E1000_HI_FW_BLOCK_DWORD_LENGTH 256 /* Num of DWORDs per page */ +#define E1000_HICR_MEMORY_BASE_EN 0x200 /* MB Enable bit - RO */ +#define E1000_HICR_EN 0x01 /* Enable bit - RO */ +/* Driver sets this bit when done to put command in RAM */ +#define E1000_HICR_C 0x02 +#define E1000_HICR_SV 0x04 /* Status Validity */ +#define E1000_HICR_FW_RESET_ENABLE 0x40 +#define E1000_HICR_FW_RESET 0x80 + +/* Intel(R) Active Management Technology signature */ +#define E1000_IAMT_SIGNATURE 0x544D4149 + +#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_mbx.c b/kernel/linux/kni/ethtool/igb/e1000_mbx.c new file mode 100644 index 00000000..1be44349 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_mbx.c @@ -0,0 +1,510 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_mbx.h" + +/** + * e1000_null_mbx_check_for_flag - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +static s32 e1000_null_mbx_check_for_flag(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG mbx_id) +{ + DEBUGFUNC("e1000_null_mbx_check_flag"); + + return E1000_SUCCESS; +} + +/** + * e1000_null_mbx_transact - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +static s32 e1000_null_mbx_transact(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG *msg, + u16 E1000_UNUSEDARG size, + u16 E1000_UNUSEDARG mbx_id) +{ + DEBUGFUNC("e1000_null_mbx_rw_msg"); + + return E1000_SUCCESS; +} + +/** + * e1000_read_mbx - Reads a message from the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to read + * + * returns SUCCESS if it successfully read message from buffer + **/ +s32 e1000_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_read_mbx"); + + /* limit read to size of mailbox */ + if (size > mbx->size) + size = mbx->size; + + if (mbx->ops.read) + ret_val = mbx->ops.read(hw, msg, size, mbx_id); + + return ret_val; +} + +/** + * e1000_write_mbx - Write a message to the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully copied message into the buffer + **/ +s32 e1000_write_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_write_mbx"); + + if (size > mbx->size) + ret_val = -E1000_ERR_MBX; + + else if (mbx->ops.write) + ret_val = mbx->ops.write(hw, msg, size, mbx_id); + + return ret_val; +} + +/** + * e1000_check_for_msg - checks to see if someone sent us mail + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the Status bit was found or else ERR_MBX + **/ +s32 e1000_check_for_msg(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_msg"); + + if (mbx->ops.check_for_msg) + ret_val = mbx->ops.check_for_msg(hw, mbx_id); + + return ret_val; +} + +/** + * e1000_check_for_ack - checks to see if someone sent us ACK + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the Status bit was found or else ERR_MBX + **/ +s32 e1000_check_for_ack(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_ack"); + + if (mbx->ops.check_for_ack) + ret_val = mbx->ops.check_for_ack(hw, mbx_id); + + return ret_val; +} + +/** + * e1000_check_for_rst - checks to see if other side has reset + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the Status bit was found or else ERR_MBX + **/ +s32 e1000_check_for_rst(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_rst"); + + if (mbx->ops.check_for_rst) + ret_val = mbx->ops.check_for_rst(hw, mbx_id); + + return ret_val; +} + +/** + * e1000_poll_for_msg - Wait for message notification + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully received a message notification + **/ +static s32 e1000_poll_for_msg(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + int countdown = mbx->timeout; + + DEBUGFUNC("e1000_poll_for_msg"); + + if (!countdown || !mbx->ops.check_for_msg) + goto out; + + while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) { + countdown--; + if (!countdown) + break; + usec_delay(mbx->usec_delay); + } + + /* if we failed, all future posted messages fail until reset */ + if (!countdown) + mbx->timeout = 0; +out: + return countdown ? E1000_SUCCESS : -E1000_ERR_MBX; +} + +/** + * e1000_poll_for_ack - Wait for message acknowledgement + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully received a message acknowledgement + **/ +static s32 e1000_poll_for_ack(struct e1000_hw *hw, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + int countdown = mbx->timeout; + + DEBUGFUNC("e1000_poll_for_ack"); + + if (!countdown || !mbx->ops.check_for_ack) + goto out; + + while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) { + countdown--; + if (!countdown) + break; + usec_delay(mbx->usec_delay); + } + + /* if we failed, all future posted messages fail until reset */ + if (!countdown) + mbx->timeout = 0; +out: + return countdown ? E1000_SUCCESS : -E1000_ERR_MBX; +} + +/** + * e1000_read_posted_mbx - Wait for message notification and receive message + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully received a message notification and + * copied it into the receive buffer. + **/ +s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_read_posted_mbx"); + + if (!mbx->ops.read) + goto out; + + ret_val = e1000_poll_for_msg(hw, mbx_id); + + /* if ack received read message, otherwise we timed out */ + if (!ret_val) + ret_val = mbx->ops.read(hw, msg, size, mbx_id); +out: + return ret_val; +} + +/** + * e1000_write_posted_mbx - Write a message to the mailbox, wait for ack + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully copied message into the buffer and + * received an ack to that message within delay * timeout period + **/ +s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_write_posted_mbx"); + + /* exit if either we can't write or there isn't a defined timeout */ + if (!mbx->ops.write || !mbx->timeout) + goto out; + + /* send msg */ + ret_val = mbx->ops.write(hw, msg, size, mbx_id); + + /* if msg sent wait until we receive an ack */ + if (!ret_val) + ret_val = e1000_poll_for_ack(hw, mbx_id); +out: + return ret_val; +} + +/** + * e1000_init_mbx_ops_generic - Initialize mbx function pointers + * @hw: pointer to the HW structure + * + * Sets the function pointers to no-op functions + **/ +void e1000_init_mbx_ops_generic(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + mbx->ops.init_params = e1000_null_ops_generic; + mbx->ops.read = e1000_null_mbx_transact; + mbx->ops.write = e1000_null_mbx_transact; + mbx->ops.check_for_msg = e1000_null_mbx_check_for_flag; + mbx->ops.check_for_ack = e1000_null_mbx_check_for_flag; + mbx->ops.check_for_rst = e1000_null_mbx_check_for_flag; + mbx->ops.read_posted = e1000_read_posted_mbx; + mbx->ops.write_posted = e1000_write_posted_mbx; +} + +static s32 e1000_check_for_bit_pf(struct e1000_hw *hw, u32 mask) +{ + u32 mbvficr = E1000_READ_REG(hw, E1000_MBVFICR); + s32 ret_val = -E1000_ERR_MBX; + + if (mbvficr & mask) { + ret_val = E1000_SUCCESS; + E1000_WRITE_REG(hw, E1000_MBVFICR, mask); + } + + return ret_val; +} + +/** + * e1000_check_for_msg_pf - checks to see if the VF has sent mail + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + **/ +static s32 e1000_check_for_msg_pf(struct e1000_hw *hw, u16 vf_number) +{ + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_msg_pf"); + + if (!e1000_check_for_bit_pf(hw, E1000_MBVFICR_VFREQ_VF1 << vf_number)) { + ret_val = E1000_SUCCESS; + hw->mbx.stats.reqs++; + } + + return ret_val; +} + +/** + * e1000_check_for_ack_pf - checks to see if the VF has ACKed + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + **/ +static s32 e1000_check_for_ack_pf(struct e1000_hw *hw, u16 vf_number) +{ + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_ack_pf"); + + if (!e1000_check_for_bit_pf(hw, E1000_MBVFICR_VFACK_VF1 << vf_number)) { + ret_val = E1000_SUCCESS; + hw->mbx.stats.acks++; + } + + return ret_val; +} + +/** + * e1000_check_for_rst_pf - checks to see if the VF has reset + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + **/ +static s32 e1000_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number) +{ + u32 vflre = E1000_READ_REG(hw, E1000_VFLRE); + s32 ret_val = -E1000_ERR_MBX; + + DEBUGFUNC("e1000_check_for_rst_pf"); + + if (vflre & (1 << vf_number)) { + ret_val = E1000_SUCCESS; + E1000_WRITE_REG(hw, E1000_VFLRE, (1 << vf_number)); + hw->mbx.stats.rsts++; + } + + return ret_val; +} + +/** + * e1000_obtain_mbx_lock_pf - obtain mailbox lock + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * return SUCCESS if we obtained the mailbox lock + **/ +static s32 e1000_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number) +{ + s32 ret_val = -E1000_ERR_MBX; + u32 p2v_mailbox; + + DEBUGFUNC("e1000_obtain_mbx_lock_pf"); + + /* Take ownership of the buffer */ + E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU); + + /* reserve mailbox for vf use */ + p2v_mailbox = E1000_READ_REG(hw, E1000_P2VMAILBOX(vf_number)); + if (p2v_mailbox & E1000_P2VMAILBOX_PFU) + ret_val = E1000_SUCCESS; + + return ret_val; +} + +/** + * e1000_write_mbx_pf - Places a message in the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @vf_number: the VF index + * + * returns SUCCESS if it successfully copied message into the buffer + **/ +static s32 e1000_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, + u16 vf_number) +{ + s32 ret_val; + u16 i; + + DEBUGFUNC("e1000_write_mbx_pf"); + + /* lock the mailbox to prevent pf/vf race condition */ + ret_val = e1000_obtain_mbx_lock_pf(hw, vf_number); + if (ret_val) + goto out_no_write; + + /* flush msg and acks as we are overwriting the message buffer */ + e1000_check_for_msg_pf(hw, vf_number); + e1000_check_for_ack_pf(hw, vf_number); + + /* copy the caller specified message to the mailbox memory buffer */ + for (i = 0; i < size; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_VMBMEM(vf_number), i, msg[i]); + + /* Interrupt VF to tell it a message has been sent and release buffer*/ + E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_STS); + + /* update stats */ + hw->mbx.stats.msgs_tx++; + +out_no_write: + return ret_val; + +} + +/** + * e1000_read_mbx_pf - Read a message from the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @vf_number: the VF index + * + * This function copies a message from the mailbox buffer to the caller's + * memory buffer. The presumption is that the caller knows that there was + * a message due to a VF request so no polling for message is needed. + **/ +static s32 e1000_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, + u16 vf_number) +{ + s32 ret_val; + u16 i; + + DEBUGFUNC("e1000_read_mbx_pf"); + + /* lock the mailbox to prevent pf/vf race condition */ + ret_val = e1000_obtain_mbx_lock_pf(hw, vf_number); + if (ret_val) + goto out_no_read; + + /* copy the message to the mailbox memory buffer */ + for (i = 0; i < size; i++) + msg[i] = E1000_READ_REG_ARRAY(hw, E1000_VMBMEM(vf_number), i); + + /* Acknowledge the message and release buffer */ + E1000_WRITE_REG(hw, E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_ACK); + + /* update stats */ + hw->mbx.stats.msgs_rx++; + +out_no_read: + return ret_val; +} + +/** + * e1000_init_mbx_params_pf - set initial values for pf mailbox + * @hw: pointer to the HW structure + * + * Initializes the hw->mbx struct to correct values for pf mailbox + */ +s32 e1000_init_mbx_params_pf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + + switch (hw->mac.type) { + case e1000_82576: + case e1000_i350: + case e1000_i354: + mbx->timeout = 0; + mbx->usec_delay = 0; + + mbx->size = E1000_VFMAILBOX_SIZE; + + mbx->ops.read = e1000_read_mbx_pf; + mbx->ops.write = e1000_write_mbx_pf; + mbx->ops.read_posted = e1000_read_posted_mbx; + mbx->ops.write_posted = e1000_write_posted_mbx; + mbx->ops.check_for_msg = e1000_check_for_msg_pf; + mbx->ops.check_for_ack = e1000_check_for_ack_pf; + mbx->ops.check_for_rst = e1000_check_for_rst_pf; + + mbx->stats.msgs_tx = 0; + mbx->stats.msgs_rx = 0; + mbx->stats.reqs = 0; + mbx->stats.acks = 0; + mbx->stats.rsts = 0; + default: + return E1000_SUCCESS; + } +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_mbx.h b/kernel/linux/kni/ethtool/igb/e1000_mbx.h new file mode 100644 index 00000000..5951f18f --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_mbx.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_MBX_H_ +#define _E1000_MBX_H_ + +#include "e1000_api.h" + +#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */ +#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */ +#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ +#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ +#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */ + +#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */ +#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */ +#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */ +#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */ + +#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */ + +/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the + * PF. The reverse is true if it is E1000_PF_*. + * Message ACK's are the value or'd with 0xF0000000 + */ +/* Msgs below or'd with this are the ACK */ +#define E1000_VT_MSGTYPE_ACK 0x80000000 +/* Msgs below or'd with this are the NACK */ +#define E1000_VT_MSGTYPE_NACK 0x40000000 +/* Indicates that VF is still clear to send requests */ +#define E1000_VT_MSGTYPE_CTS 0x20000000 +#define E1000_VT_MSGINFO_SHIFT 16 +/* bits 23:16 are used for extra info for certain messages */ +#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT) + +#define E1000_VF_RESET 0x01 /* VF requests reset */ +#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */ +#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */ +#define E1000_VF_SET_MULTICAST_COUNT_MASK (0x1F << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_MULTICAST_OVERFLOW (0x80 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */ +#define E1000_VF_SET_VLAN_ADD (0x01 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_LPE 0x05 /* reqs to set VMOLR.LPE */ +#define E1000_VF_SET_PROMISC 0x06 /* reqs to clear VMOLR.ROPE/MPME*/ +#define E1000_VF_SET_PROMISC_UNICAST (0x01 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT) + +#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */ + +#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */ +#define E1000_VF_MBX_INIT_DELAY 500 /* microseconds between retries */ + +s32 e1000_read_mbx(struct e1000_hw *, u32 *, u16, u16); +s32 e1000_write_mbx(struct e1000_hw *, u32 *, u16, u16); +s32 e1000_read_posted_mbx(struct e1000_hw *, u32 *, u16, u16); +s32 e1000_write_posted_mbx(struct e1000_hw *, u32 *, u16, u16); +s32 e1000_check_for_msg(struct e1000_hw *, u16); +s32 e1000_check_for_ack(struct e1000_hw *, u16); +s32 e1000_check_for_rst(struct e1000_hw *, u16); +void e1000_init_mbx_ops_generic(struct e1000_hw *hw); +s32 e1000_init_mbx_params_pf(struct e1000_hw *); + +#endif /* _E1000_MBX_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_nvm.c b/kernel/linux/kni/ethtool/igb/e1000_nvm.c new file mode 100644 index 00000000..78c3fc0e --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_nvm.c @@ -0,0 +1,950 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_api.h" + +static void e1000_reload_nvm_generic(struct e1000_hw *hw); + +/** + * e1000_init_nvm_ops_generic - Initialize NVM function pointers + * @hw: pointer to the HW structure + * + * Setups up the function pointers to no-op functions + **/ +void e1000_init_nvm_ops_generic(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + DEBUGFUNC("e1000_init_nvm_ops_generic"); + + /* Initialize function pointers */ + nvm->ops.init_params = e1000_null_ops_generic; + nvm->ops.acquire = e1000_null_ops_generic; + nvm->ops.read = e1000_null_read_nvm; + nvm->ops.release = e1000_null_nvm_generic; + nvm->ops.reload = e1000_reload_nvm_generic; + nvm->ops.update = e1000_null_ops_generic; + nvm->ops.valid_led_default = e1000_null_led_default; + nvm->ops.validate = e1000_null_ops_generic; + nvm->ops.write = e1000_null_write_nvm; +} + +/** + * e1000_null_nvm_read - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_read_nvm(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b, + u16 E1000_UNUSEDARG *c) +{ + DEBUGFUNC("e1000_null_read_nvm"); + return E1000_SUCCESS; +} + +/** + * e1000_null_nvm_generic - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_nvm_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_nvm_generic"); + return; +} + +/** + * e1000_null_led_default - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_led_default(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG *data) +{ + DEBUGFUNC("e1000_null_led_default"); + return E1000_SUCCESS; +} + +/** + * e1000_null_write_nvm - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_write_nvm(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG a, u16 E1000_UNUSEDARG b, + u16 E1000_UNUSEDARG *c) +{ + DEBUGFUNC("e1000_null_write_nvm"); + return E1000_SUCCESS; +} + +/** + * e1000_raise_eec_clk - Raise EEPROM clock + * @hw: pointer to the HW structure + * @eecd: pointer to the EEPROM + * + * Enable/Raise the EEPROM clock bit. + **/ +static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) +{ + *eecd = *eecd | E1000_EECD_SK; + E1000_WRITE_REG(hw, E1000_EECD, *eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(hw->nvm.delay_usec); +} + +/** + * e1000_lower_eec_clk - Lower EEPROM clock + * @hw: pointer to the HW structure + * @eecd: pointer to the EEPROM + * + * Clear/Lower the EEPROM clock bit. + **/ +static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) +{ + *eecd = *eecd & ~E1000_EECD_SK; + E1000_WRITE_REG(hw, E1000_EECD, *eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(hw->nvm.delay_usec); +} + +/** + * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM + * @hw: pointer to the HW structure + * @data: data to send to the EEPROM + * @count: number of bits to shift out + * + * We need to shift 'count' bits out to the EEPROM. So, the value in the + * "data" parameter will be shifted out to the EEPROM one bit at a time. + * In order to do this, "data" must be broken down into bits. + **/ +static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + u32 mask; + + DEBUGFUNC("e1000_shift_out_eec_bits"); + + mask = 0x01 << (count - 1); + if (nvm->type == e1000_nvm_eeprom_spi) + eecd |= E1000_EECD_DO; + + do { + eecd &= ~E1000_EECD_DI; + + if (data & mask) + eecd |= E1000_EECD_DI; + + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + + usec_delay(nvm->delay_usec); + + e1000_raise_eec_clk(hw, &eecd); + e1000_lower_eec_clk(hw, &eecd); + + mask >>= 1; + } while (mask); + + eecd &= ~E1000_EECD_DI; + E1000_WRITE_REG(hw, E1000_EECD, eecd); +} + +/** + * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM + * @hw: pointer to the HW structure + * @count: number of bits to shift in + * + * In order to read a register from the EEPROM, we need to shift 'count' bits + * in from the EEPROM. Bits are "shifted in" by raising the clock input to + * the EEPROM (setting the SK bit), and then reading the value of the data out + * "DO" bit. During this "shifting in" process the data in "DI" bit should + * always be clear. + **/ +static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count) +{ + u32 eecd; + u32 i; + u16 data; + + DEBUGFUNC("e1000_shift_in_eec_bits"); + + eecd = E1000_READ_REG(hw, E1000_EECD); + + eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); + data = 0; + + for (i = 0; i < count; i++) { + data <<= 1; + e1000_raise_eec_clk(hw, &eecd); + + eecd = E1000_READ_REG(hw, E1000_EECD); + + eecd &= ~E1000_EECD_DI; + if (eecd & E1000_EECD_DO) + data |= 1; + + e1000_lower_eec_clk(hw, &eecd); + } + + return data; +} + +/** + * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion + * @hw: pointer to the HW structure + * @ee_reg: EEPROM flag for polling + * + * Polls the EEPROM status bit for either read or write completion based + * upon the value of 'ee_reg'. + **/ +s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) +{ + u32 attempts = 100000; + u32 i, reg = 0; + + DEBUGFUNC("e1000_poll_eerd_eewr_done"); + + for (i = 0; i < attempts; i++) { + if (ee_reg == E1000_NVM_POLL_READ) + reg = E1000_READ_REG(hw, E1000_EERD); + else + reg = E1000_READ_REG(hw, E1000_EEWR); + + if (reg & E1000_NVM_RW_REG_DONE) + return E1000_SUCCESS; + + usec_delay(5); + } + + return -E1000_ERR_NVM; +} + +/** + * e1000_acquire_nvm_generic - Generic request for access to EEPROM + * @hw: pointer to the HW structure + * + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -E1000_ERR_NVM (-1). + **/ +s32 e1000_acquire_nvm_generic(struct e1000_hw *hw) +{ + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + s32 timeout = E1000_NVM_GRANT_ATTEMPTS; + + DEBUGFUNC("e1000_acquire_nvm_generic"); + + E1000_WRITE_REG(hw, E1000_EECD, eecd | E1000_EECD_REQ); + eecd = E1000_READ_REG(hw, E1000_EECD); + + while (timeout) { + if (eecd & E1000_EECD_GNT) + break; + usec_delay(5); + eecd = E1000_READ_REG(hw, E1000_EECD); + timeout--; + } + + if (!timeout) { + eecd &= ~E1000_EECD_REQ; + E1000_WRITE_REG(hw, E1000_EECD, eecd); + DEBUGOUT("Could not acquire NVM grant\n"); + return -E1000_ERR_NVM; + } + + return E1000_SUCCESS; +} + +/** + * e1000_standby_nvm - Return EEPROM to standby state + * @hw: pointer to the HW structure + * + * Return the EEPROM to a standby state. + **/ +static void e1000_standby_nvm(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + + DEBUGFUNC("e1000_standby_nvm"); + + if (nvm->type == e1000_nvm_eeprom_spi) { + /* Toggle CS to flush commands */ + eecd |= E1000_EECD_CS; + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(nvm->delay_usec); + eecd &= ~E1000_EECD_CS; + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(nvm->delay_usec); + } +} + +/** + * e1000_stop_nvm - Terminate EEPROM command + * @hw: pointer to the HW structure + * + * Terminates the current command by inverting the EEPROM's chip select pin. + **/ +static void e1000_stop_nvm(struct e1000_hw *hw) +{ + u32 eecd; + + DEBUGFUNC("e1000_stop_nvm"); + + eecd = E1000_READ_REG(hw, E1000_EECD); + if (hw->nvm.type == e1000_nvm_eeprom_spi) { + /* Pull CS high */ + eecd |= E1000_EECD_CS; + e1000_lower_eec_clk(hw, &eecd); + } +} + +/** + * e1000_release_nvm_generic - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit. + **/ +void e1000_release_nvm_generic(struct e1000_hw *hw) +{ + u32 eecd; + + DEBUGFUNC("e1000_release_nvm_generic"); + + e1000_stop_nvm(hw); + + eecd = E1000_READ_REG(hw, E1000_EECD); + eecd &= ~E1000_EECD_REQ; + E1000_WRITE_REG(hw, E1000_EECD, eecd); +} + +/** + * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write + * @hw: pointer to the HW structure + * + * Setups the EEPROM for reading and writing. + **/ +static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = E1000_READ_REG(hw, E1000_EECD); + u8 spi_stat_reg; + + DEBUGFUNC("e1000_ready_nvm_eeprom"); + + if (nvm->type == e1000_nvm_eeprom_spi) { + u16 timeout = NVM_MAX_RETRY_SPI; + + /* Clear SK and CS */ + eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); + E1000_WRITE_REG(hw, E1000_EECD, eecd); + E1000_WRITE_FLUSH(hw); + usec_delay(1); + + /* Read "Status Register" repeatedly until the LSB is cleared. + * The EEPROM will signal that the command has been completed + * by clearing bit 0 of the internal status register. If it's + * not cleared within 'timeout', then error out. + */ + while (timeout) { + e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, + hw->nvm.opcode_bits); + spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8); + if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) + break; + + usec_delay(5); + e1000_standby_nvm(hw); + timeout--; + } + + if (!timeout) { + DEBUGOUT("SPI NVM Status error\n"); + return -E1000_ERR_NVM; + } + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_nvm_spi - Read EEPROM's using SPI + * @hw: pointer to the HW structure + * @offset: offset of word in the EEPROM to read + * @words: number of words to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM. + **/ +s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i = 0; + s32 ret_val; + u16 word_in; + u8 read_opcode = NVM_READ_OPCODE_SPI; + + DEBUGFUNC("e1000_read_nvm_spi"); + + /* A check for invalid values: offset too large, too many words, + * and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + ret_val = nvm->ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_ready_nvm_eeprom(hw); + if (ret_val) + goto release; + + e1000_standby_nvm(hw); + + if ((nvm->address_bits == 8) && (offset >= 128)) + read_opcode |= NVM_A8_OPCODE_SPI; + + /* Send the READ command (opcode + addr) */ + e1000_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits); + e1000_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits); + + /* Read the data. SPI NVMs increment the address with each byte + * read and will roll over if reading beyond the end. This allows + * us to read the whole NVM from any offset + */ + for (i = 0; i < words; i++) { + word_in = e1000_shift_in_eec_bits(hw, 16); + data[i] = (word_in >> 8) | (word_in << 8); + } + +release: + nvm->ops.release(hw); + + return ret_val; +} + +/** + * e1000_read_nvm_eerd - Reads EEPROM using EERD register + * @hw: pointer to the HW structure + * @offset: offset of word in the EEPROM to read + * @words: number of words to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i, eerd = 0; + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_read_nvm_eerd"); + + /* A check for invalid values: offset too large, too many words, + * too many words for the offset, and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + for (i = 0; i < words; i++) { + eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) + + E1000_NVM_RW_REG_START; + + E1000_WRITE_REG(hw, E1000_EERD, eerd); + ret_val = e1000_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ); + if (ret_val) + break; + + data[i] = (E1000_READ_REG(hw, E1000_EERD) >> + E1000_NVM_RW_REG_DATA); + } + + return ret_val; +} + +/** + * e1000_write_nvm_spi - Write to EEPROM using SPI + * @hw: pointer to the HW structure + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the EEPROM + * + * Writes data to EEPROM at offset using SPI interface. + * + * If e1000_update_nvm_checksum is not called after this function , the + * EEPROM will most likely contain an invalid checksum. + **/ +s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + s32 ret_val = -E1000_ERR_NVM; + u16 widx = 0; + + DEBUGFUNC("e1000_write_nvm_spi"); + + /* A check for invalid values: offset too large, too many words, + * and not enough words. + */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + DEBUGOUT("nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + while (widx < words) { + u8 write_opcode = NVM_WRITE_OPCODE_SPI; + + ret_val = nvm->ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_ready_nvm_eeprom(hw); + if (ret_val) { + nvm->ops.release(hw); + return ret_val; + } + + e1000_standby_nvm(hw); + + /* Send the WRITE ENABLE command (8 bit opcode) */ + e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, + nvm->opcode_bits); + + e1000_standby_nvm(hw); + + /* Some SPI eeproms use the 8th address bit embedded in the + * opcode + */ + if ((nvm->address_bits == 8) && (offset >= 128)) + write_opcode |= NVM_A8_OPCODE_SPI; + + /* Send the Write command (8-bit opcode + addr) */ + e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); + e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), + nvm->address_bits); + + /* Loop to allow for up to whole page write of eeprom */ + while (widx < words) { + u16 word_out = data[widx]; + word_out = (word_out >> 8) | (word_out << 8); + e1000_shift_out_eec_bits(hw, word_out, 16); + widx++; + + if ((((offset + widx) * 2) % nvm->page_size) == 0) { + e1000_standby_nvm(hw); + break; + } + } + msec_delay(10); + nvm->ops.release(hw); + } + + return ret_val; +} + +/** + * e1000_read_pba_string_generic - Read device part number + * @hw: pointer to the HW structure + * @pba_num: pointer to device part number + * @pba_num_size: size of part number buffer + * + * Reads the product board assembly (PBA) number from the EEPROM and stores + * the value in pba_num. + **/ +s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, + u32 pba_num_size) +{ + s32 ret_val; + u16 nvm_data; + u16 pba_ptr; + u16 offset; + u16 length; + + DEBUGFUNC("e1000_read_pba_string_generic"); + + if (pba_num == NULL) { + DEBUGOUT("PBA string buffer was null\n"); + return -E1000_ERR_INVALID_ARGUMENT; + } + + ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + /* if nvm_data is not ptr guard the PBA must be in legacy format which + * means pba_ptr is actually our second data word for the PBA number + * and we can decode it into an ascii string + */ + if (nvm_data != NVM_PBA_PTR_GUARD) { + DEBUGOUT("NVM PBA number is not stored as string\n"); + + /* make sure callers buffer is big enough to store the PBA */ + if (pba_num_size < E1000_PBANUM_LENGTH) { + DEBUGOUT("PBA string buffer too small\n"); + return E1000_ERR_NO_SPACE; + } + + /* extract hex string from data and pba_ptr */ + pba_num[0] = (nvm_data >> 12) & 0xF; + pba_num[1] = (nvm_data >> 8) & 0xF; + pba_num[2] = (nvm_data >> 4) & 0xF; + pba_num[3] = nvm_data & 0xF; + pba_num[4] = (pba_ptr >> 12) & 0xF; + pba_num[5] = (pba_ptr >> 8) & 0xF; + pba_num[6] = '-'; + pba_num[7] = 0; + pba_num[8] = (pba_ptr >> 4) & 0xF; + pba_num[9] = pba_ptr & 0xF; + + /* put a null character on the end of our string */ + pba_num[10] = '\0'; + + /* switch all the data but the '-' to hex char */ + for (offset = 0; offset < 10; offset++) { + if (pba_num[offset] < 0xA) + pba_num[offset] += '0'; + else if (pba_num[offset] < 0x10) + pba_num[offset] += 'A' - 0xA; + } + + return E1000_SUCCESS; + } + + ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (length == 0xFFFF || length == 0) { + DEBUGOUT("NVM PBA number section invalid length\n"); + return -E1000_ERR_NVM_PBA_SECTION; + } + /* check if pba_num buffer is big enough */ + if (pba_num_size < (((u32)length * 2) - 1)) { + DEBUGOUT("PBA string buffer too small\n"); + return -E1000_ERR_NO_SPACE; + } + + /* trim pba length from start of string */ + pba_ptr++; + length--; + + for (offset = 0; offset < length; offset++) { + ret_val = hw->nvm.ops.read(hw, pba_ptr + offset, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + pba_num[offset * 2] = (u8)(nvm_data >> 8); + pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF); + } + pba_num[offset * 2] = '\0'; + + return E1000_SUCCESS; +} + +/** + * e1000_read_pba_length_generic - Read device part number length + * @hw: pointer to the HW structure + * @pba_num_size: size of part number buffer + * + * Reads the product board assembly (PBA) number length from the EEPROM and + * stores the value in pba_num_size. + **/ +s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size) +{ + s32 ret_val; + u16 nvm_data; + u16 pba_ptr; + u16 length; + + DEBUGFUNC("e1000_read_pba_length_generic"); + + if (pba_num_size == NULL) { + DEBUGOUT("PBA buffer size was null\n"); + return -E1000_ERR_INVALID_ARGUMENT; + } + + ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + /* if data is not ptr guard the PBA must be in legacy format */ + if (nvm_data != NVM_PBA_PTR_GUARD) { + *pba_num_size = E1000_PBANUM_LENGTH; + return E1000_SUCCESS; + } + + ret_val = hw->nvm.ops.read(hw, pba_ptr, 1, &length); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + + if (length == 0xFFFF || length == 0) { + DEBUGOUT("NVM PBA number section invalid length\n"); + return -E1000_ERR_NVM_PBA_SECTION; + } + + /* Convert from length in u16 values to u8 chars, add 1 for NULL, + * and subtract 2 because length field is included in length. + */ + *pba_num_size = ((u32)length * 2) - 1; + + return E1000_SUCCESS; +} + + + + + +/** + * e1000_read_mac_addr_generic - Read device MAC address + * @hw: pointer to the HW structure + * + * Reads the device MAC address from the EEPROM and stores the value. + * Since devices with two ports use the same EEPROM, we increment the + * last bit in the MAC address for the second port. + **/ +s32 e1000_read_mac_addr_generic(struct e1000_hw *hw) +{ + u32 rar_high; + u32 rar_low; + u16 i; + + rar_high = E1000_READ_REG(hw, E1000_RAH(0)); + rar_low = E1000_READ_REG(hw, E1000_RAL(0)); + + for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++) + hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8)); + + for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++) + hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8)); + + for (i = 0; i < ETH_ADDR_LEN; i++) + hw->mac.addr[i] = hw->mac.perm_addr[i]; + + return E1000_SUCCESS; +} + +/** + * e1000_validate_nvm_checksum_generic - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + **/ +s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw) +{ + s32 ret_val; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_validate_nvm_checksum_generic"); + + for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error\n"); + return ret_val; + } + checksum += nvm_data; + } + + if (checksum != (u16) NVM_SUM) { + DEBUGOUT("NVM Checksum Invalid\n"); + return -E1000_ERR_NVM; + } + + return E1000_SUCCESS; +} + +/** + * e1000_update_nvm_checksum_generic - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. + **/ +s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw) +{ + s32 ret_val; + u16 checksum = 0; + u16 i, nvm_data; + + DEBUGFUNC("e1000_update_nvm_checksum"); + + for (i = 0; i < NVM_CHECKSUM_REG; i++) { + ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); + if (ret_val) { + DEBUGOUT("NVM Read Error while updating checksum.\n"); + return ret_val; + } + checksum += nvm_data; + } + checksum = (u16) NVM_SUM - checksum; + ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum); + if (ret_val) + DEBUGOUT("NVM Write Error while updating checksum.\n"); + + return ret_val; +} + +/** + * e1000_reload_nvm_generic - Reloads EEPROM + * @hw: pointer to the HW structure + * + * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the + * extended control register. + **/ +static void e1000_reload_nvm_generic(struct e1000_hw *hw) +{ + u32 ctrl_ext; + + DEBUGFUNC("e1000_reload_nvm_generic"); + + usec_delay(10); + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); +} + +/** + * e1000_get_fw_version - Get firmware version information + * @hw: pointer to the HW structure + * @fw_vers: pointer to output version structure + * + * unsupported/not present features return 0 in version structure + **/ +void e1000_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers) +{ + u16 eeprom_verh, eeprom_verl, etrack_test, fw_version; + u8 q, hval, rem, result; + u16 comb_verh, comb_verl, comb_offset; + + memset(fw_vers, 0, sizeof(struct e1000_fw_version)); + + /* basic eeprom version numbers, bits used vary by part and by tool + * used to create the nvm images */ + /* Check which data format we have */ + hw->nvm.ops.read(hw, NVM_ETRACK_HIWORD, 1, &etrack_test); + switch (hw->mac.type) { + case e1000_i211: + e1000_read_invm_version(hw, fw_vers); + return; + case e1000_82575: + case e1000_82576: + case e1000_82580: + /* Use this format, unless EETRACK ID exists, + * then use alternate format + */ + if ((etrack_test & NVM_MAJOR_MASK) != NVM_ETRACK_VALID) { + hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); + fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) + >> NVM_MAJOR_SHIFT; + fw_vers->eep_minor = (fw_version & NVM_MINOR_MASK) + >> NVM_MINOR_SHIFT; + fw_vers->eep_build = (fw_version & NVM_IMAGE_ID_MASK); + goto etrack_id; + } + break; + case e1000_i210: + if (!(e1000_get_flash_presence_i210(hw))) { + e1000_read_invm_version(hw, fw_vers); + return; + } + /* fall through */ + case e1000_i350: + case e1000_i354: + /* find combo image version */ + hw->nvm.ops.read(hw, NVM_COMB_VER_PTR, 1, &comb_offset); + if ((comb_offset != 0x0) && + (comb_offset != NVM_VER_INVALID)) { + + hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset + + 1), 1, &comb_verh); + hw->nvm.ops.read(hw, (NVM_COMB_VER_OFF + comb_offset), + 1, &comb_verl); + + /* get Option Rom version if it exists and is valid */ + if ((comb_verh && comb_verl) && + ((comb_verh != NVM_VER_INVALID) && + (comb_verl != NVM_VER_INVALID))) { + + fw_vers->or_valid = true; + fw_vers->or_major = + comb_verl >> NVM_COMB_VER_SHFT; + fw_vers->or_build = + (comb_verl << NVM_COMB_VER_SHFT) + | (comb_verh >> NVM_COMB_VER_SHFT); + fw_vers->or_patch = + comb_verh & NVM_COMB_VER_MASK; + } + } + break; + default: + return; + } + hw->nvm.ops.read(hw, NVM_VERSION, 1, &fw_version); + fw_vers->eep_major = (fw_version & NVM_MAJOR_MASK) + >> NVM_MAJOR_SHIFT; + + /* check for old style version format in newer images*/ + if ((fw_version & NVM_NEW_DEC_MASK) == 0x0) { + eeprom_verl = (fw_version & NVM_COMB_VER_MASK); + } else { + eeprom_verl = (fw_version & NVM_MINOR_MASK) + >> NVM_MINOR_SHIFT; + } + /* Convert minor value to hex before assigning to output struct + * Val to be converted will not be higher than 99, per tool output + */ + q = eeprom_verl / NVM_HEX_CONV; + hval = q * NVM_HEX_TENS; + rem = eeprom_verl % NVM_HEX_CONV; + result = hval + rem; + fw_vers->eep_minor = result; + +etrack_id: + if ((etrack_test & NVM_MAJOR_MASK) == NVM_ETRACK_VALID) { + hw->nvm.ops.read(hw, NVM_ETRACK_WORD, 1, &eeprom_verl); + hw->nvm.ops.read(hw, (NVM_ETRACK_WORD + 1), 1, &eeprom_verh); + fw_vers->etrack_id = (eeprom_verh << NVM_ETRACK_SHIFT) + | eeprom_verl; + } + return; +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_nvm.h b/kernel/linux/kni/ethtool/igb/e1000_nvm.h new file mode 100644 index 00000000..e27b1c0a --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_nvm.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_NVM_H_ +#define _E1000_NVM_H_ + + +struct e1000_fw_version { + u32 etrack_id; + u16 eep_major; + u16 eep_minor; + u16 eep_build; + + u8 invm_major; + u8 invm_minor; + u8 invm_img_type; + + bool or_valid; + u16 or_major; + u16 or_build; + u16 or_patch; +}; + + +void e1000_init_nvm_ops_generic(struct e1000_hw *hw); +s32 e1000_null_read_nvm(struct e1000_hw *hw, u16 a, u16 b, u16 *c); +void e1000_null_nvm_generic(struct e1000_hw *hw); +s32 e1000_null_led_default(struct e1000_hw *hw, u16 *data); +s32 e1000_null_write_nvm(struct e1000_hw *hw, u16 a, u16 b, u16 *c); +s32 e1000_acquire_nvm_generic(struct e1000_hw *hw); + +s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg); +s32 e1000_read_mac_addr_generic(struct e1000_hw *hw); +s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, + u32 pba_num_size); +s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size); +s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data); +s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw); +s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw); +void e1000_release_nvm_generic(struct e1000_hw *hw); +void e1000_get_fw_version(struct e1000_hw *hw, + struct e1000_fw_version *fw_vers); + +#define E1000_STM_OPCODE 0xDB00 + +#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_osdep.h b/kernel/linux/kni/ethtool/igb/e1000_osdep.h new file mode 100644 index 00000000..3228100e --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_osdep.h @@ -0,0 +1,121 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + + +/* glue for the OS independent part of e1000 + * includes register access macros + */ + +#ifndef _E1000_OSDEP_H_ +#define _E1000_OSDEP_H_ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/if_ether.h> +#include <linux/sched.h> +#include "kcompat.h" + +#ifndef __INTEL_COMPILER +#pragma GCC diagnostic ignored "-Wunused-function" +#endif + +#define usec_delay(x) udelay(x) +#define usec_delay_irq(x) udelay(x) +#ifndef msec_delay +#define msec_delay(x) do { \ + /* Don't mdelay in interrupt context! */ \ + if (in_interrupt()) \ + BUG(); \ + else \ + msleep(x); \ +} while (0) + +/* Some workarounds require millisecond delays and are run during interrupt + * context. Most notably, when establishing link, the phy may need tweaking + * but cannot process phy register reads/writes faster than millisecond + * intervals...and we establish link due to a "link status change" interrupt. + */ +#define msec_delay_irq(x) mdelay(x) +#endif + +#define PCI_COMMAND_REGISTER PCI_COMMAND +#define CMD_MEM_WRT_INVALIDATE PCI_COMMAND_INVALIDATE +#define ETH_ADDR_LEN ETH_ALEN + +#ifdef __BIG_ENDIAN +#define E1000_BIG_ENDIAN __BIG_ENDIAN +#endif + + +#ifdef DEBUG +#define DEBUGOUT(S) printk(KERN_DEBUG S) +#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S, ## A) +#else +#define DEBUGOUT(S) +#define DEBUGOUT1(S, A...) +#endif + +#ifdef DEBUG_FUNC +#define DEBUGFUNC(F) DEBUGOUT(F "\n") +#else +#define DEBUGFUNC(F) +#endif +#define DEBUGOUT2 DEBUGOUT1 +#define DEBUGOUT3 DEBUGOUT2 +#define DEBUGOUT7 DEBUGOUT3 + +#define E1000_REGISTER(a, reg) reg + +#define E1000_WRITE_REG(a, reg, value) ( \ + writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg)))) + +#define E1000_READ_REG(a, reg) (readl((a)->hw_addr + E1000_REGISTER(a, reg))) + +#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \ + writel((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2)))) + +#define E1000_READ_REG_ARRAY(a, reg, offset) ( \ + readl((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 2))) + +#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY +#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY + +#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \ + writew((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1)))) + +#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \ + readw((a)->hw_addr + E1000_REGISTER(a, reg) + ((offset) << 1))) + +#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \ + writeb((value), ((a)->hw_addr + E1000_REGISTER(a, reg) + (offset)))) + +#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \ + readb((a)->hw_addr + E1000_REGISTER(a, reg) + (offset))) + +#define E1000_WRITE_REG_IO(a, reg, offset) do { \ + outl(reg, ((a)->io_base)); \ + outl(offset, ((a)->io_base + 4)); } while (0) + +#define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, E1000_STATUS) + +#define E1000_WRITE_FLASH_REG(a, reg, value) ( \ + writel((value), ((a)->flash_address + reg))) + +#define E1000_WRITE_FLASH_REG16(a, reg, value) ( \ + writew((value), ((a)->flash_address + reg))) + +#define E1000_READ_FLASH_REG(a, reg) (readl((a)->flash_address + reg)) + +#define E1000_READ_FLASH_REG16(a, reg) (readw((a)->flash_address + reg)) + +#endif /* _E1000_OSDEP_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/e1000_phy.c b/kernel/linux/kni/ethtool/igb/e1000_phy.c new file mode 100644 index 00000000..1934a309 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_phy.c @@ -0,0 +1,3392 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "e1000_api.h" + +static s32 e1000_wait_autoneg(struct e1000_hw *hw); +/* Cable length tables */ +static const u16 e1000_m88_cable_length_table[] = { + 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; +#define M88E1000_CABLE_LENGTH_TABLE_SIZE \ + (sizeof(e1000_m88_cable_length_table) / \ + sizeof(e1000_m88_cable_length_table[0])) + +static const u16 e1000_igp_2_cable_length_table[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3, + 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22, + 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40, + 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61, + 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82, + 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95, + 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, + 124}; +#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ + (sizeof(e1000_igp_2_cable_length_table) / \ + sizeof(e1000_igp_2_cable_length_table[0])) + +/** + * e1000_init_phy_ops_generic - Initialize PHY function pointers + * @hw: pointer to the HW structure + * + * Setups up the function pointers to no-op functions + **/ +void e1000_init_phy_ops_generic(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + DEBUGFUNC("e1000_init_phy_ops_generic"); + + /* Initialize function pointers */ + phy->ops.init_params = e1000_null_ops_generic; + phy->ops.acquire = e1000_null_ops_generic; + phy->ops.check_polarity = e1000_null_ops_generic; + phy->ops.check_reset_block = e1000_null_ops_generic; + phy->ops.commit = e1000_null_ops_generic; + phy->ops.force_speed_duplex = e1000_null_ops_generic; + phy->ops.get_cfg_done = e1000_null_ops_generic; + phy->ops.get_cable_length = e1000_null_ops_generic; + phy->ops.get_info = e1000_null_ops_generic; + phy->ops.set_page = e1000_null_set_page; + phy->ops.read_reg = e1000_null_read_reg; + phy->ops.read_reg_locked = e1000_null_read_reg; + phy->ops.read_reg_page = e1000_null_read_reg; + phy->ops.release = e1000_null_phy_generic; + phy->ops.reset = e1000_null_ops_generic; + phy->ops.set_d0_lplu_state = e1000_null_lplu_state; + phy->ops.set_d3_lplu_state = e1000_null_lplu_state; + phy->ops.write_reg = e1000_null_write_reg; + phy->ops.write_reg_locked = e1000_null_write_reg; + phy->ops.write_reg_page = e1000_null_write_reg; + phy->ops.power_up = e1000_null_phy_generic; + phy->ops.power_down = e1000_null_phy_generic; + phy->ops.read_i2c_byte = e1000_read_i2c_byte_null; + phy->ops.write_i2c_byte = e1000_write_i2c_byte_null; +} + +/** + * e1000_null_set_page - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_set_page(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG data) +{ + DEBUGFUNC("e1000_null_set_page"); + return E1000_SUCCESS; +} + +/** + * e1000_null_read_reg - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_read_reg(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG *data) +{ + DEBUGFUNC("e1000_null_read_reg"); + return E1000_SUCCESS; +} + +/** + * e1000_null_phy_generic - No-op function, return void + * @hw: pointer to the HW structure + **/ +void e1000_null_phy_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_null_phy_generic"); + return; +} + +/** + * e1000_null_lplu_state - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_lplu_state(struct e1000_hw E1000_UNUSEDARG *hw, + bool E1000_UNUSEDARG active) +{ + DEBUGFUNC("e1000_null_lplu_state"); + return E1000_SUCCESS; +} + +/** + * e1000_null_write_reg - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_write_reg(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG data) +{ + DEBUGFUNC("e1000_null_write_reg"); + return E1000_SUCCESS; +} + +/** + * e1000_read_i2c_byte_null - No-op function, return 0 + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: data value read + * + **/ +s32 e1000_read_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG byte_offset, + u8 E1000_UNUSEDARG dev_addr, + u8 E1000_UNUSEDARG *data) +{ + DEBUGFUNC("e1000_read_i2c_byte_null"); + return E1000_SUCCESS; +} + +/** + * e1000_write_i2c_byte_null - No-op function, return 0 + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: data value to write + * + **/ +s32 e1000_write_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG byte_offset, + u8 E1000_UNUSEDARG dev_addr, + u8 E1000_UNUSEDARG data) +{ + DEBUGFUNC("e1000_write_i2c_byte_null"); + return E1000_SUCCESS; +} + +/** + * e1000_check_reset_block_generic - Check if PHY reset is blocked + * @hw: pointer to the HW structure + * + * Read the PHY management control register and check whether a PHY reset + * is blocked. If a reset is not blocked return E1000_SUCCESS, otherwise + * return E1000_BLK_PHY_RESET (12). + **/ +s32 e1000_check_reset_block_generic(struct e1000_hw *hw) +{ + u32 manc; + + DEBUGFUNC("e1000_check_reset_block"); + + manc = E1000_READ_REG(hw, E1000_MANC); + + return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? + E1000_BLK_PHY_RESET : E1000_SUCCESS; +} + +/** + * e1000_get_phy_id - Retrieve the PHY ID and revision + * @hw: pointer to the HW structure + * + * Reads the PHY registers and stores the PHY ID and possibly the PHY + * revision in the hardware structure. + **/ +s32 e1000_get_phy_id(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val = E1000_SUCCESS; + u16 phy_id; + + DEBUGFUNC("e1000_get_phy_id"); + + if (!phy->ops.read_reg) + return E1000_SUCCESS; + + ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id); + if (ret_val) + return ret_val; + + phy->id = (u32)(phy_id << 16); + usec_delay(20); + ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id); + if (ret_val) + return ret_val; + + phy->id |= (u32)(phy_id & PHY_REVISION_MASK); + phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); + + + return E1000_SUCCESS; +} + +/** + * e1000_phy_reset_dsp_generic - Reset PHY DSP + * @hw: pointer to the HW structure + * + * Reset the digital signal processor. + **/ +s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw) +{ + s32 ret_val; + + DEBUGFUNC("e1000_phy_reset_dsp_generic"); + + if (!hw->phy.ops.write_reg) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1); + if (ret_val) + return ret_val; + + return hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0); +} + +/** + * e1000_read_phy_reg_mdic - Read MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the MDI control register in the PHY at offset and stores the + * information read to data. + **/ +s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, mdic = 0; + + DEBUGFUNC("e1000_read_phy_reg_mdic"); + + if (offset > MAX_PHY_REG_ADDRESS) { + DEBUGOUT1("PHY Address %d is out of range\n", offset); + return -E1000_ERR_PARAM; + } + + /* Set up Op-code, Phy Address, and register offset in the MDI + * Control register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + mdic = ((offset << E1000_MDIC_REG_SHIFT) | + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_READ)); + + E1000_WRITE_REG(hw, E1000_MDIC, mdic); + + /* Poll the ready bit to see if the MDI read completed + * Increasing the time out as testing showed failures with + * the lower time out + */ + for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { + usec_delay_irq(50); + mdic = E1000_READ_REG(hw, E1000_MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + DEBUGOUT("MDI Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (mdic & E1000_MDIC_ERROR) { + DEBUGOUT("MDI Error\n"); + return -E1000_ERR_PHY; + } + if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { + DEBUGOUT2("MDI Read offset error - requested %d, returned %d\n", + offset, + (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT); + return -E1000_ERR_PHY; + } + *data = (u16) mdic; + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_mdic - Write MDI control register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write to register at offset + * + * Writes data to MDI control register in the PHY at offset. + **/ +s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, mdic = 0; + + DEBUGFUNC("e1000_write_phy_reg_mdic"); + + if (offset > MAX_PHY_REG_ADDRESS) { + DEBUGOUT1("PHY Address %d is out of range\n", offset); + return -E1000_ERR_PARAM; + } + + /* Set up Op-code, Phy Address, and register offset in the MDI + * Control register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + mdic = (((u32)data) | + (offset << E1000_MDIC_REG_SHIFT) | + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_WRITE)); + + E1000_WRITE_REG(hw, E1000_MDIC, mdic); + + /* Poll the ready bit to see if the MDI read completed + * Increasing the time out as testing showed failures with + * the lower time out + */ + for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { + usec_delay_irq(50); + mdic = E1000_READ_REG(hw, E1000_MDIC); + if (mdic & E1000_MDIC_READY) + break; + } + if (!(mdic & E1000_MDIC_READY)) { + DEBUGOUT("MDI Write did not complete\n"); + return -E1000_ERR_PHY; + } + if (mdic & E1000_MDIC_ERROR) { + DEBUGOUT("MDI Error\n"); + return -E1000_ERR_PHY; + } + if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { + DEBUGOUT2("MDI Write offset error - requested %d, returned %d\n", + offset, + (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT); + return -E1000_ERR_PHY; + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_phy_reg_i2c - Read PHY register using i2c + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the i2c interface and stores the + * retrieved information in data. + **/ +s32 e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, i2ccmd = 0; + + DEBUGFUNC("e1000_read_phy_reg_i2c"); + + /* Set up Op-code, Phy Address, and register address in the I2CCMD + * register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + (E1000_I2CCMD_OPCODE_READ)); + + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) + break; + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + + /* Need to byte-swap the 16-bit value. */ + *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00); + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_i2c - Write PHY register using i2c + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset using the i2c interface. + **/ +s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, i2ccmd = 0; + u16 phy_data_swapped; + + DEBUGFUNC("e1000_write_phy_reg_i2c"); + + /* Prevent overwritting SFP I2C EEPROM which is at A0 address.*/ + if ((hw->phy.addr == 0) || (hw->phy.addr > 7)) { + DEBUGOUT1("PHY I2C Address %d is out of range.\n", + hw->phy.addr); + return -E1000_ERR_CONFIG; + } + + /* Swap the data bytes for the I2C interface */ + phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00); + + /* Set up Op-code, Phy Address, and register address in the I2CCMD + * register. The MAC will take care of interfacing with the + * PHY to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_WRITE | + phy_data_swapped); + + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) + break; + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Write did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + + return E1000_SUCCESS; +} + +/** + * e1000_read_sfp_data_byte - Reads SFP module data. + * @hw: pointer to the HW structure + * @offset: byte location offset to be read + * @data: read data buffer pointer + * + * Reads one byte from SFP module data stored + * in SFP resided EEPROM memory or SFP diagnostic area. + * Function should be called with + * E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access + * E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters + * access + **/ +s32 e1000_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data) +{ + u32 i = 0; + u32 i2ccmd = 0; + u32 data_local = 0; + + DEBUGFUNC("e1000_read_sfp_data_byte"); + + if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) { + DEBUGOUT("I2CCMD command address exceeds upper limit\n"); + return -E1000_ERR_PHY; + } + + /* Set up Op-code, EEPROM Address,in the I2CCMD + * register. The MAC will take care of interfacing with the + * EEPROM to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_READ); + + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + data_local = E1000_READ_REG(hw, E1000_I2CCMD); + if (data_local & E1000_I2CCMD_READY) + break; + } + if (!(data_local & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (data_local & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + *data = (u8) data_local & 0xFF; + + return E1000_SUCCESS; +} + +/** + * e1000_write_sfp_data_byte - Writes SFP module data. + * @hw: pointer to the HW structure + * @offset: byte location offset to write to + * @data: data to write + * + * Writes one byte to SFP module data stored + * in SFP resided EEPROM memory or SFP diagnostic area. + * Function should be called with + * E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access + * E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters + * access + **/ +s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data) +{ + u32 i = 0; + u32 i2ccmd = 0; + u32 data_local = 0; + + DEBUGFUNC("e1000_write_sfp_data_byte"); + + if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) { + DEBUGOUT("I2CCMD command address exceeds upper limit\n"); + return -E1000_ERR_PHY; + } + /* The programming interface is 16 bits wide + * so we need to read the whole word first + * then update appropriate byte lane and write + * the updated word back. + */ + /* Set up Op-code, EEPROM Address,in the I2CCMD + * register. The MAC will take care of interfacing + * with an EEPROM to write the data given. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_READ); + /* Set a command to read single word */ + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + /* Poll the ready bit to see if lastly + * launched I2C operation completed + */ + i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) { + /* Check if this is READ or WRITE phase */ + if ((i2ccmd & E1000_I2CCMD_OPCODE_READ) == + E1000_I2CCMD_OPCODE_READ) { + /* Write the selected byte + * lane and update whole word + */ + data_local = i2ccmd & 0xFF00; + data_local |= data; + i2ccmd = ((offset << + E1000_I2CCMD_REG_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_WRITE | data_local); + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + } else { + break; + } + } + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Write did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + return E1000_SUCCESS; +} + +/** + * e1000_read_phy_reg_m88 - Read m88 PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore, if necessary, then reads the PHY register at offset + * and storing the retrieved information in data. Release any acquired + * semaphores before exiting. + **/ +s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_read_phy_reg_m88"); + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, + data); + + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_write_phy_reg_m88 - Write m88 PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) +{ + s32 ret_val; + + DEBUGFUNC("e1000_write_phy_reg_m88"); + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, + data); + + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_set_page_igp - Set page as on IGP-like PHY(s) + * @hw: pointer to the HW structure + * @page: page to set (shifted left when necessary) + * + * Sets PHY page required for PHY register access. Assumes semaphore is + * already acquired. Note, this function sets phy.addr to 1 so the caller + * must set it appropriately (if necessary) after this function returns. + **/ +s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page) +{ + DEBUGFUNC("e1000_set_page_igp"); + + DEBUGOUT1("Setting page 0x%x\n", page); + + hw->phy.addr = 1; + + return e1000_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page); +} + +/** + * __e1000_read_phy_reg_igp - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary, then reads the PHY register at offset + * and stores the retrieved information in data. Release any acquired + * semaphores before exiting. + **/ +static s32 __e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("__e1000_read_phy_reg_igp"); + + if (!locked) { + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + if (offset > MAX_PHY_MULTI_PAGE_REG) + ret_val = e1000_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); + if (!ret_val) + ret_val = e1000_read_phy_reg_mdic(hw, + MAX_PHY_REG_ADDRESS & offset, + data); + if (!locked) + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_read_phy_reg_igp - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset and stores the + * retrieved information in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_igp(hw, offset, data, false); +} + +/** + * e1000_read_phy_reg_igp_locked - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired. + **/ +s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_igp(hw, offset, data, true); +} + +/** + * e1000_write_phy_reg_igp - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +static s32 __e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) +{ + s32 ret_val = E1000_SUCCESS; + + DEBUGFUNC("e1000_write_phy_reg_igp"); + + if (!locked) { + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + if (offset > MAX_PHY_MULTI_PAGE_REG) + ret_val = e1000_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); + if (!ret_val) + ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & + offset, + data); + if (!locked) + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_write_phy_reg_igp - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_igp(hw, offset, data, false); +} + +/** + * e1000_write_phy_reg_igp_locked - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. + * Assumes semaphore already acquired. + **/ +s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_igp(hw, offset, data, true); +} + +/** + * __e1000_read_kmrn_reg - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary. Then reads the PHY register at offset + * using the kumeran interface. The information retrieved is stored in data. + * Release any acquired semaphores before exiting. + **/ +static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) +{ + u32 kmrnctrlsta; + + DEBUGFUNC("__e1000_read_kmrn_reg"); + + if (!locked) { + s32 ret_val = E1000_SUCCESS; + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & + E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; + E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta); + E1000_WRITE_FLUSH(hw); + + usec_delay(2); + + kmrnctrlsta = E1000_READ_REG(hw, E1000_KMRNCTRLSTA); + *data = (u16)kmrnctrlsta; + + if (!locked) + hw->phy.ops.release(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_read_kmrn_reg_generic - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset using the + * kumeran interface. The information retrieved is stored in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, false); +} + +/** + * e1000_read_kmrn_reg_locked - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the kumeran interface. The + * information retrieved is stored in data. + * Assumes semaphore already acquired. + **/ +s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, true); +} + +/** + * __e1000_write_kmrn_reg - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary. Then write the data to PHY register + * at the offset using the kumeran interface. Release any acquired semaphores + * before exiting. + **/ +static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) +{ + u32 kmrnctrlsta; + + DEBUGFUNC("e1000_write_kmrn_reg_generic"); + + if (!locked) { + s32 ret_val = E1000_SUCCESS; + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & + E1000_KMRNCTRLSTA_OFFSET) | data; + E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta); + E1000_WRITE_FLUSH(hw); + + usec_delay(2); + + if (!locked) + hw->phy.ops.release(hw); + + return E1000_SUCCESS; +} + +/** + * e1000_write_kmrn_reg_generic - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to the PHY register at the offset + * using the kumeran interface. Release the acquired semaphore before exiting. + **/ +s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, false); +} + +/** + * e1000_write_kmrn_reg_locked - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Write the data to PHY register at the offset using the kumeran interface. + * Assumes semaphore already acquired. + **/ +s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, true); +} + +/** + * e1000_set_master_slave_mode - Setup PHY for Master/slave mode + * @hw: pointer to the HW structure + * + * Sets up Master/slave mode + **/ +static s32 e1000_set_master_slave_mode(struct e1000_hw *hw) +{ + s32 ret_val; + u16 phy_data; + + /* Resolve Master/Slave mode */ + ret_val = hw->phy.ops.read_reg(hw, PHY_1000T_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* load defaults for future use */ + hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ? + ((phy_data & CR_1000T_MS_VALUE) ? + e1000_ms_force_master : + e1000_ms_force_slave) : e1000_ms_auto; + + switch (hw->phy.ms_type) { + case e1000_ms_force_master: + phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + break; + case e1000_ms_force_slave: + phy_data |= CR_1000T_MS_ENABLE; + phy_data &= ~(CR_1000T_MS_VALUE); + break; + case e1000_ms_auto: + phy_data &= ~CR_1000T_MS_ENABLE; + /* fall-through */ + default: + break; + } + + return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data); +} + +/** + * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link + * @hw: pointer to the HW structure + * + * Sets up Carrier-sense on Transmit and downshift values. + **/ +s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) +{ + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_setup_82577"); + + if (hw->phy.reset_disable) + return E1000_SUCCESS; + + if (hw->phy.type == e1000_phy_82580) { + ret_val = hw->phy.ops.reset(hw); + if (ret_val) { + DEBUGOUT("Error resetting the PHY.\n"); + return ret_val; + } + } + + /* Enable CRS on Tx. This must be set for half-duplex operation. */ + ret_val = hw->phy.ops.read_reg(hw, I82577_CFG_REG, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= I82577_CFG_ASSERT_CRS_ON_TX; + + /* Enable downshift */ + phy_data |= I82577_CFG_ENABLE_DOWNSHIFT; + + ret_val = hw->phy.ops.write_reg(hw, I82577_CFG_REG, phy_data); + if (ret_val) + return ret_val; + + /* Set MDI/MDIX mode */ + ret_val = hw->phy.ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data); + if (ret_val) + return ret_val; + phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK; + /* Options: + * 0 - Auto (default) + * 1 - MDI mode + * 2 - MDI-X mode + */ + switch (hw->phy.mdix) { + case 1: + break; + case 2: + phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX; + break; + case 0: + default: + phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX; + break; + } + ret_val = hw->phy.ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data); + if (ret_val) + return ret_val; + + return e1000_set_master_slave_mode(hw); +} + +/** + * e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link + * @hw: pointer to the HW structure + * + * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock + * and downshift values are set also. + **/ +s32 e1000_copper_link_setup_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_setup_m88"); + + if (phy->reset_disable) + return E1000_SUCCESS; + + /* Enable CRS on Tx. This must be set for half-duplex operation. */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + + /* Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + + switch (phy->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled + */ + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if (phy->disable_polarity_correction) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + if (phy->revision < E1000_REVISION_4) { + /* Force TX_CLK in the Extended PHY Specific Control Register + * to 25MHz clock. + */ + ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_EPSCR_TX_CLK_25; + + if ((phy->revision == E1000_REVISION_2) && + (phy->id == M88E1111_I_PHY_ID)) { + /* 82573L PHY - set the downshift counter to 5x. */ + phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK; + phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X; + } else { + /* Configure Master and Slave downshift values */ + phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); + phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | + M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); + } + ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + } + + /* Commit the changes. */ + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + + return E1000_SUCCESS; +} + +/** + * e1000_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link + * @hw: pointer to the HW structure + * + * Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's. + * Also enables and sets the downshift parameters. + **/ +s32 e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + + DEBUGFUNC("e1000_copper_link_setup_m88_gen2"); + + if (phy->reset_disable) + return E1000_SUCCESS; + + /* Enable CRS on Tx. This must be set for half-duplex operation. */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + + switch (phy->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + /* M88E1112 does not support this mode) */ + if (phy->id != M88E1112_E_PHY_ID) { + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + } + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled + */ + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if (phy->disable_polarity_correction) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + + /* Enable downshift and setting it to X6 */ + if (phy->id == M88E1543_E_PHY_ID) { + phy_data &= ~I347AT4_PSCR_DOWNSHIFT_ENABLE; + ret_val = + phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + } + + phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK; + phy_data |= I347AT4_PSCR_DOWNSHIFT_6X; + phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE; + + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + /* Commit the changes. */ + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + + ret_val = e1000_set_master_slave_mode(hw); + if (ret_val) + return ret_val; + + return E1000_SUCCESS; +} + +/** + * e1000_copper_link_setup_igp - Setup igp PHY's for copper link + * @hw: pointer to the HW structure + * + * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for + * igp PHY's. + **/ +s32 e1000_copper_link_setup_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_copper_link_setup_igp"); + + if (phy->reset_disable) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.reset(hw); + if (ret_val) { + DEBUGOUT("Error resetting the PHY.\n"); + return ret_val; + } + + /* Wait 100ms for MAC to configure PHY from NVM settings, to avoid + * timeout issues when LFS is enabled. + */ + msec_delay(100); + + /* disable lplu d0 during driver init */ + if (hw->phy.ops.set_d0_lplu_state) { + ret_val = hw->phy.ops.set_d0_lplu_state(hw, false); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D0\n"); + return ret_val; + } + } + /* Configure mdi-mdix settings */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCR_AUTO_MDIX; + + switch (phy->mdix) { + case 1: + data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 2: + data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 0: + default: + data |= IGP01E1000_PSCR_AUTO_MDIX; + break; + } + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, data); + if (ret_val) + return ret_val; + + /* set auto-master slave resolution settings */ + if (hw->mac.autoneg) { + /* when autonegotiation advertisement is only 1000Mbps then we + * should disable SmartSpeed and enable Auto MasterSlave + * resolution as hardware default. + */ + if (phy->autoneg_advertised == ADVERTISE_1000_FULL) { + /* Disable SmartSpeed */ + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + + /* Set auto Master/Slave resolution process */ + ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data); + if (ret_val) + return ret_val; + + data &= ~CR_1000T_MS_ENABLE; + ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data); + if (ret_val) + return ret_val; + } + + ret_val = e1000_set_master_slave_mode(hw); + } + + return ret_val; +} + +/** + * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation + * @hw: pointer to the HW structure + * + * Reads the MII auto-neg advertisement register and/or the 1000T control + * register and if the PHY is already setup for auto-negotiation, then + * return successful. Otherwise, setup advertisement and flow control to + * the appropriate values for the wanted auto-negotiation. + **/ +static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg = 0; + + DEBUGFUNC("e1000_phy_setup_autoneg"); + + phy->autoneg_advertised &= phy->autoneg_mask; + + /* Read the MII Auto-Neg Advertisement Register (Address 4). */ + ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + if (phy->autoneg_mask & ADVERTISE_1000_FULL) { + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, + &mii_1000t_ctrl_reg); + if (ret_val) + return ret_val; + } + + /* Need to parse both autoneg_advertised and fc and set up + * the appropriate PHY registers. First we will parse for + * autoneg_advertised software override. Since we can advertise + * a plethora of combinations, we need to check each bit + * individually. + */ + + /* First we clear all the 10/100 mb speed bits in the Auto-Neg + * Advertisement Register (Address 4) and the 1000 mb speed bits in + * the 1000Base-T Control Register (Address 9). + */ + mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS | + NWAY_AR_100TX_HD_CAPS | + NWAY_AR_10T_FD_CAPS | + NWAY_AR_10T_HD_CAPS); + mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); + + DEBUGOUT1("autoneg_advertised %x\n", phy->autoneg_advertised); + + /* Do we want to advertise 10 Mb Half Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_10_HALF) { + DEBUGOUT("Advertise 10mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; + } + + /* Do we want to advertise 10 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_10_FULL) { + DEBUGOUT("Advertise 10mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; + } + + /* Do we want to advertise 100 Mb Half Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_100_HALF) { + DEBUGOUT("Advertise 100mb Half duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; + } + + /* Do we want to advertise 100 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_100_FULL) { + DEBUGOUT("Advertise 100mb Full duplex\n"); + mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; + } + + /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ + if (phy->autoneg_advertised & ADVERTISE_1000_HALF) + DEBUGOUT("Advertise 1000mb Half duplex request denied!\n"); + + /* Do we want to advertise 1000 Mb Full Duplex? */ + if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { + DEBUGOUT("Advertise 1000mb Full duplex\n"); + mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; + } + + /* Check for a software override of the flow control settings, and + * setup the PHY advertisement registers accordingly. If + * auto-negotiation is enabled, then software will have to set the + * "PAUSE" bits to the correct value in the Auto-Negotiation + * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto- + * negotiation. + * + * The possible values of the "fc" parameter are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames + * but we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: No software override. The flow control configuration + * in the EEPROM is used. + */ + switch (hw->fc.current_mode) { + case e1000_fc_none: + /* Flow control (Rx & Tx) is completely disabled by a + * software over-ride. + */ + mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case e1000_fc_rx_pause: + /* Rx Flow control is enabled, and Tx Flow control is + * disabled, by a software over-ride. + * + * Since there really isn't a way to advertise that we are + * capable of Rx Pause ONLY, we will advertise that we + * support both symmetric and asymmetric Rx PAUSE. Later + * (in e1000_config_fc_after_link_up) we will disable the + * hw's ability to send PAUSE frames. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + case e1000_fc_tx_pause: + /* Tx Flow control is enabled, and Rx Flow control is + * disabled, by a software over-ride. + */ + mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; + mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; + break; + case e1000_fc_full: + /* Flow control (both Rx and Tx) is enabled by a software + * over-ride. + */ + mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); + break; + default: + DEBUGOUT("Flow control param set incorrectly\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); + if (ret_val) + return ret_val; + + DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); + + if (phy->autoneg_mask & ADVERTISE_1000_FULL) + ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, + mii_1000t_ctrl_reg); + + return ret_val; +} + +/** + * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link + * @hw: pointer to the HW structure + * + * Performs initial bounds checking on autoneg advertisement parameter, then + * configure to advertise the full capability. Setup the PHY to autoneg + * and restart the negotiation process between the link partner. If + * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. + **/ +static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_ctrl; + + DEBUGFUNC("e1000_copper_link_autoneg"); + + /* Perform some bounds checking on the autoneg advertisement + * parameter. + */ + phy->autoneg_advertised &= phy->autoneg_mask; + + /* If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if (!phy->autoneg_advertised) + phy->autoneg_advertised = phy->autoneg_mask; + + DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); + ret_val = e1000_phy_setup_autoneg(hw); + if (ret_val) { + DEBUGOUT("Error Setting up Auto-Negotiation\n"); + return ret_val; + } + DEBUGOUT("Restarting Auto-Neg\n"); + + /* Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); + if (ret_val) + return ret_val; + + phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl); + if (ret_val) + return ret_val; + + /* Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if (phy->autoneg_wait_to_complete) { + ret_val = e1000_wait_autoneg(hw); + if (ret_val) { + DEBUGOUT("Error while waiting for autoneg to complete\n"); + return ret_val; + } + } + + hw->mac.get_link_status = true; + + return ret_val; +} + +/** + * e1000_setup_copper_link_generic - Configure copper link settings + * @hw: pointer to the HW structure + * + * Calls the appropriate function to configure the link for auto-neg or forced + * speed and duplex. Then we check for link, once link is established calls + * to configure collision distance and flow control are called. If link is + * not established, we return -E1000_ERR_PHY (-2). + **/ +s32 e1000_setup_copper_link_generic(struct e1000_hw *hw) +{ + s32 ret_val; + bool link; + + DEBUGFUNC("e1000_setup_copper_link_generic"); + + if (hw->mac.autoneg) { + /* Setup autoneg and flow control advertisement and perform + * autonegotiation. + */ + ret_val = e1000_copper_link_autoneg(hw); + if (ret_val) + return ret_val; + } else { + /* PHY will be set to 10H, 10F, 100H or 100F + * depending on user settings. + */ + DEBUGOUT("Forcing Speed and Duplex\n"); + ret_val = hw->phy.ops.force_speed_duplex(hw); + if (ret_val) { + DEBUGOUT("Error Forcing Speed and Duplex\n"); + return ret_val; + } + } + + /* Check link status. Wait up to 100 microseconds for link to become + * valid. + */ + ret_val = e1000_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10, + &link); + if (ret_val) + return ret_val; + + if (link) { + DEBUGOUT("Valid link established!!!\n"); + hw->mac.ops.config_collision_dist(hw); + ret_val = e1000_config_fc_after_link_up_generic(hw); + } else { + DEBUGOUT("Unable to establish link!!!\n"); + } + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY + * @hw: pointer to the HW structure + * + * Calls the PHY setup function to force speed and duplex. Clears the + * auto-crossover to force MDI manually. Waits for link and returns + * successful if link up is successful, else -E1000_ERR_PHY (-2). + **/ +s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_igp"); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &phy_data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); + if (ret_val) + return ret_val; + + /* Clear Auto-Crossover to force MDI manually. IGP requires MDI + * forced whenever speed and duplex are forced. + */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; + phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); + if (ret_val) + return ret_val; + + DEBUGOUT1("IGP PSCR: %X\n", phy_data); + + usec_delay(1); + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on IGP phy.\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) + DEBUGOUT("Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + } + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY + * @hw: pointer to the HW structure + * + * Calls the PHY setup function to force speed and duplex. Clears the + * auto-crossover to force MDI manually. Resets the PHY to commit the + * changes. If time expires while waiting for link up, we reset the DSP. + * After reset, TX_CLK and CRS on Tx must be set. Return successful upon + * successful completion, else return corresponding error code. + **/ +s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_m88"); + + /* I210 and I211 devices support Auto-Crossover in forced operation. */ + if (phy->type != e1000_phy_i210) { + /* Clear Auto-Crossover to force MDI manually. M88E1000 + * requires MDI forced whenever speed and duplex are forced. + */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + } + + DEBUGOUT1("M88E1000 PSCR: %X\n", phy_data); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &phy_data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); + if (ret_val) + return ret_val; + + /* Reset the phy to commit changes. */ + ret_val = hw->phy.ops.commit(hw); + if (ret_val) + return ret_val; + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on M88 phy.\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) { + bool reset_dsp = true; + + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1543_E_PHY_ID: + case I210_I_PHY_ID: + reset_dsp = false; + break; + default: + if (hw->phy.type != e1000_phy_m88) + reset_dsp = false; + break; + } + + if (!reset_dsp) { + DEBUGOUT("Link taking longer than expected.\n"); + } else { + /* We didn't get link. + * Reset the DSP and cross our fingers. + */ + ret_val = phy->ops.write_reg(hw, + M88E1000_PHY_PAGE_SELECT, + 0x001d); + if (ret_val) + return ret_val; + ret_val = e1000_phy_reset_dsp_generic(hw); + if (ret_val) + return ret_val; + } + } + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + } + + if (hw->phy.type != e1000_phy_m88) + return E1000_SUCCESS; + + if (hw->phy.id == I347AT4_E_PHY_ID || + hw->phy.id == M88E1340M_E_PHY_ID || + hw->phy.id == M88E1112_E_PHY_ID) + return E1000_SUCCESS; + if (hw->phy.id == I210_I_PHY_ID) + return E1000_SUCCESS; + if ((hw->phy.id == M88E1543_E_PHY_ID)) + return E1000_SUCCESS; + ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* Resetting the phy means we need to re-force TX_CLK in the + * Extended PHY Specific Control Register to 25MHz clock from + * the reset value of 2.5MHz. + */ + phy_data |= M88E1000_EPSCR_TX_CLK_25; + ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + /* In addition, we must re-enable CRS on Tx for both half and full + * duplex. + */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex + * @hw: pointer to the HW structure + * + * Forces the speed and duplex settings of the PHY. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_ife"); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, data); + if (ret_val) + return ret_val; + + /* Disable MDI-X support for 10/100 */ + ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data); + if (ret_val) + return ret_val; + + data &= ~IFE_PMC_AUTO_MDIX; + data &= ~IFE_PMC_FORCE_MDIX; + + ret_val = phy->ops.write_reg(hw, IFE_PHY_MDIX_CONTROL, data); + if (ret_val) + return ret_val; + + DEBUGOUT1("IFE PMC: %X\n", data); + + usec_delay(1); + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on IFE phy.\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) + DEBUGOUT("Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + } + + return E1000_SUCCESS; +} + +/** + * e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex + * @hw: pointer to the HW structure + * @phy_ctrl: pointer to current value of PHY_CONTROL + * + * Forces speed and duplex on the PHY by doing the following: disable flow + * control, force speed/duplex on the MAC, disable auto speed detection, + * disable auto-negotiation, configure duplex, configure speed, configure + * the collision distance, write configuration to CTRL register. The + * caller must write to the PHY_CONTROL register for these settings to + * take affect. + **/ +void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 ctrl; + + DEBUGFUNC("e1000_phy_force_speed_duplex_setup"); + + /* Turn off flow control when forcing speed/duplex */ + hw->fc.current_mode = e1000_fc_none; + + /* Force speed/duplex on the mac */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ctrl &= ~E1000_CTRL_SPD_SEL; + + /* Disable Auto Speed Detection */ + ctrl &= ~E1000_CTRL_ASDE; + + /* Disable autoneg on the phy */ + *phy_ctrl &= ~MII_CR_AUTO_NEG_EN; + + /* Forcing Full or Half Duplex? */ + if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { + ctrl &= ~E1000_CTRL_FD; + *phy_ctrl &= ~MII_CR_FULL_DUPLEX; + DEBUGOUT("Half Duplex\n"); + } else { + ctrl |= E1000_CTRL_FD; + *phy_ctrl |= MII_CR_FULL_DUPLEX; + DEBUGOUT("Full Duplex\n"); + } + + /* Forcing 10mb or 100mb? */ + if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) { + ctrl |= E1000_CTRL_SPD_100; + *phy_ctrl |= MII_CR_SPEED_100; + *phy_ctrl &= ~MII_CR_SPEED_1000; + DEBUGOUT("Forcing 100mb\n"); + } else { + ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); + *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); + DEBUGOUT("Forcing 10mb\n"); + } + + hw->mac.ops.config_collision_dist(hw); + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); +} + +/** + * e1000_set_d3_lplu_state_generic - Sets low power link up state for D3 + * @hw: pointer to the HW structure + * @active: boolean used to enable/disable lplu + * + * Success returns 0, Failure returns 1 + * + * The low power link up (lplu) state is set to the power management level D3 + * and SmartSpeed is disabled when active is true, else clear lplu for D3 + * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU + * is used during Dx states where the power conservation is most important. + * During driver activity, SmartSpeed should be enabled so performance is + * maintained. + **/ +s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_set_d3_lplu_state_generic"); + + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; + + ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); + if (ret_val) + return ret_val; + + if (!active) { + data &= ~IGP02E1000_PM_D3_LPLU; + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); + if (ret_val) + return ret_val; + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. + */ + if (phy->smart_speed == e1000_smart_speed_on) { + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + } else if (phy->smart_speed == e1000_smart_speed_off) { + ret_val = phy->ops.read_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + } + } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || + (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || + (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { + data |= IGP02E1000_PM_D3_LPLU; + ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); + if (ret_val) + return ret_val; + + /* When LPLU is enabled, we should disable SmartSpeed */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + data); + } + + return ret_val; +} + +/** + * e1000_check_downshift_generic - Checks whether a downshift in speed occurred + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns 1 + * + * A downshift is detected by querying the PHY link health. + **/ +s32 e1000_check_downshift_generic(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, offset, mask; + + DEBUGFUNC("e1000_check_downshift_generic"); + + switch (phy->type) { + case e1000_phy_i210: + case e1000_phy_m88: + case e1000_phy_gg82563: + offset = M88E1000_PHY_SPEC_STATUS; + mask = M88E1000_PSSR_DOWNSHIFT; + break; + case e1000_phy_igp_2: + case e1000_phy_igp_3: + offset = IGP01E1000_PHY_LINK_HEALTH; + mask = IGP01E1000_PLHR_SS_DOWNGRADE; + break; + default: + /* speed downshift not supported */ + phy->speed_downgraded = false; + return E1000_SUCCESS; + } + + ret_val = phy->ops.read_reg(hw, offset, &phy_data); + + if (!ret_val) + phy->speed_downgraded = !!(phy_data & mask); + + return ret_val; +} + +/** + * e1000_check_polarity_m88 - Checks the polarity. + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + * + * Polarity is determined based on the PHY specific status register. + **/ +s32 e1000_check_polarity_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_check_polarity_m88"); + + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &data); + + if (!ret_val) + phy->cable_polarity = ((data & M88E1000_PSSR_REV_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_check_polarity_igp - Checks the polarity. + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + * + * Polarity is determined based on the PHY port status register, and the + * current speed (since there is no polarity at 100Mbps). + **/ +s32 e1000_check_polarity_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data, offset, mask; + + DEBUGFUNC("e1000_check_polarity_igp"); + + /* Polarity is determined based on the speed of + * our connection. + */ + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data); + if (ret_val) + return ret_val; + + if ((data & IGP01E1000_PSSR_SPEED_MASK) == + IGP01E1000_PSSR_SPEED_1000MBPS) { + offset = IGP01E1000_PHY_PCS_INIT_REG; + mask = IGP01E1000_PHY_POLARITY_MASK; + } else { + /* This really only applies to 10Mbps since + * there is no polarity for 100Mbps (always 0). + */ + offset = IGP01E1000_PHY_PORT_STATUS; + mask = IGP01E1000_PSSR_POLARITY_REVERSED; + } + + ret_val = phy->ops.read_reg(hw, offset, &data); + + if (!ret_val) + phy->cable_polarity = ((data & mask) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_check_polarity_ife - Check cable polarity for IFE PHY + * @hw: pointer to the HW structure + * + * Polarity is determined on the polarity reversal feature being enabled. + **/ +s32 e1000_check_polarity_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, offset, mask; + + DEBUGFUNC("e1000_check_polarity_ife"); + + /* Polarity is determined based on the reversal feature being enabled. + */ + if (phy->polarity_correction) { + offset = IFE_PHY_EXTENDED_STATUS_CONTROL; + mask = IFE_PESC_POLARITY_REVERSED; + } else { + offset = IFE_PHY_SPECIAL_CONTROL; + mask = IFE_PSC_FORCE_POLARITY; + } + + ret_val = phy->ops.read_reg(hw, offset, &phy_data); + + if (!ret_val) + phy->cable_polarity = ((phy_data & mask) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_wait_autoneg - Wait for auto-neg completion + * @hw: pointer to the HW structure + * + * Waits for auto-negotiation to complete or for the auto-negotiation time + * limit to expire, which ever happens first. + **/ +static s32 e1000_wait_autoneg(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 i, phy_status; + + DEBUGFUNC("e1000_wait_autoneg"); + + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; + + /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ + for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) { + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + if (phy_status & MII_SR_AUTONEG_COMPLETE) + break; + msec_delay(100); + } + + /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation + * has completed. + */ + return ret_val; +} + +/** + * e1000_phy_has_link_generic - Polls PHY for link + * @hw: pointer to the HW structure + * @iterations: number of times to poll for link + * @usec_interval: delay between polling attempts + * @success: pointer to whether polling was successful or not + * + * Polls the PHY status register for link, 'iterations' number of times. + **/ +s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, + u32 usec_interval, bool *success) +{ + s32 ret_val = E1000_SUCCESS; + u16 i, phy_status; + + DEBUGFUNC("e1000_phy_has_link_generic"); + + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; + + for (i = 0; i < iterations; i++) { + /* Some PHYs require the PHY_STATUS register to be read + * twice due to the link bit being sticky. No harm doing + * it across the board. + */ + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + /* If the first read fails, another entity may have + * ownership of the resources, wait and try again to + * see if they have relinquished the resources yet. + */ + usec_delay(usec_interval); + ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); + if (ret_val) + break; + if (phy_status & MII_SR_LINK_STATUS) + break; + if (usec_interval >= 1000) + msec_delay_irq(usec_interval/1000); + else + usec_delay(usec_interval); + } + + *success = (i < iterations); + + return ret_val; +} + +/** + * e1000_get_cable_length_m88 - Determine cable length for m88 PHY + * @hw: pointer to the HW structure + * + * Reads the PHY specific status register to retrieve the cable length + * information. The cable length is determined by averaging the minimum and + * maximum values to get the "average" cable length. The m88 PHY has four + * possible cable length values, which are: + * Register Value Cable Length + * 0 < 50 meters + * 1 50 - 80 meters + * 2 80 - 110 meters + * 3 110 - 140 meters + * 4 > 140 meters + **/ +s32 e1000_get_cable_length_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, index; + + DEBUGFUNC("e1000_get_cable_length_m88"); + + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if (ret_val) + return ret_val; + + index = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT); + + if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) + return -E1000_ERR_PHY; + + phy->min_cable_length = e1000_m88_cable_length_table[index]; + phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; + + phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; + + return E1000_SUCCESS; +} + +s32 e1000_get_cable_length_m88_gen2(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, phy_data2, is_cm; + u16 index, default_page; + + DEBUGFUNC("e1000_get_cable_length_m88_gen2"); + + switch (hw->phy.id) { + case I210_I_PHY_ID: + /* Get cable length from PHY Cable Diagnostics Control Reg */ + ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + + (I347AT4_PCDL + phy->addr), + &phy_data); + if (ret_val) + return ret_val; + + /* Check if the unit of cable length is meters or cm */ + ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + + I347AT4_PCDC, &phy_data2); + if (ret_val) + return ret_val; + + is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); + + /* Populate the phy structure with cable length in meters */ + phy->min_cable_length = phy_data / (is_cm ? 100 : 1); + phy->max_cable_length = phy_data / (is_cm ? 100 : 1); + phy->cable_length = phy_data / (is_cm ? 100 : 1); + break; + case M88E1543_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case I347AT4_E_PHY_ID: + /* Remember the original page select and set it to 7 */ + ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, + &default_page); + if (ret_val) + return ret_val; + + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07); + if (ret_val) + return ret_val; + + /* Get cable length from PHY Cable Diagnostics Control Reg */ + ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr), + &phy_data); + if (ret_val) + return ret_val; + + /* Check if the unit of cable length is meters or cm */ + ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2); + if (ret_val) + return ret_val; + + is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); + + /* Populate the phy structure with cable length in meters */ + phy->min_cable_length = phy_data / (is_cm ? 100 : 1); + phy->max_cable_length = phy_data / (is_cm ? 100 : 1); + phy->cable_length = phy_data / (is_cm ? 100 : 1); + + /* Reset the page select to its original value */ + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, + default_page); + if (ret_val) + return ret_val; + break; + + case M88E1112_E_PHY_ID: + /* Remember the original page select and set it to 5 */ + ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, + &default_page); + if (ret_val) + return ret_val; + + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE, + &phy_data); + if (ret_val) + return ret_val; + + index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT; + + if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) + return -E1000_ERR_PHY; + + phy->min_cable_length = e1000_m88_cable_length_table[index]; + phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; + + phy->cable_length = (phy->min_cable_length + + phy->max_cable_length) / 2; + + /* Reset the page select to its original value */ + ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, + default_page); + if (ret_val) + return ret_val; + + break; + default: + return -E1000_ERR_PHY; + } + + return ret_val; +} + +/** + * e1000_get_cable_length_igp_2 - Determine cable length for igp2 PHY + * @hw: pointer to the HW structure + * + * The automatic gain control (agc) normalizes the amplitude of the + * received signal, adjusting for the attenuation produced by the + * cable. By reading the AGC registers, which represent the + * combination of coarse and fine gain value, the value can be put + * into a lookup table to obtain the approximate cable length + * for each channel. + **/ +s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, i, agc_value = 0; + u16 cur_agc_index, max_agc_index = 0; + u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; + static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { + IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D + }; + + DEBUGFUNC("e1000_get_cable_length_igp_2"); + + /* Read the AGC registers for all channels */ + for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { + ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data); + if (ret_val) + return ret_val; + + /* Getting bits 15:9, which represent the combination of + * coarse and fine gain values. The result is a number + * that can be put into the lookup table to obtain the + * approximate cable length. + */ + cur_agc_index = ((phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & + IGP02E1000_AGC_LENGTH_MASK); + + /* Array index bound check. */ + if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) || + (cur_agc_index == 0)) + return -E1000_ERR_PHY; + + /* Remove min & max AGC values from calculation. */ + if (e1000_igp_2_cable_length_table[min_agc_index] > + e1000_igp_2_cable_length_table[cur_agc_index]) + min_agc_index = cur_agc_index; + if (e1000_igp_2_cable_length_table[max_agc_index] < + e1000_igp_2_cable_length_table[cur_agc_index]) + max_agc_index = cur_agc_index; + + agc_value += e1000_igp_2_cable_length_table[cur_agc_index]; + } + + agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] + + e1000_igp_2_cable_length_table[max_agc_index]); + agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); + + /* Calculate cable length with the error range of +/- 10 meters. */ + phy->min_cable_length = (((agc_value - IGP02E1000_AGC_RANGE) > 0) ? + (agc_value - IGP02E1000_AGC_RANGE) : 0); + phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE; + + phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; + + return E1000_SUCCESS; +} + +/** + * e1000_get_phy_info_m88 - Retrieve PHY information + * @hw: pointer to the HW structure + * + * Valid for only copper links. Read the PHY status register (sticky read) + * to verify that link is up. Read the PHY special control register to + * determine the polarity and 10base-T extended distance. Read the PHY + * special status register to determine MDI/MDIx and current speed. If + * speed is 1000, then determine cable length, local and remote receiver. + **/ +s32 e1000_get_phy_info_m88(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_m88"); + + if (phy->media_type != e1000_media_type_copper) { + DEBUGOUT("Phy info is only valid for copper media\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if (ret_val) + return ret_val; + + phy->polarity_correction = !!(phy_data & + M88E1000_PSCR_POLARITY_REVERSAL); + + ret_val = e1000_check_polarity_m88(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX); + + if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { + ret_val = hw->phy.ops.get_cable_length(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data); + if (ret_val) + return ret_val; + + phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + + phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + } else { + /* Set values to "undefined" */ + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + } + + return ret_val; +} + +/** + * e1000_get_phy_info_igp - Retrieve igp PHY information + * @hw: pointer to the HW structure + * + * Read PHY status to determine if link is up. If link is up, then + * set/determine 10base-T extended distance and polarity correction. Read + * PHY port status to determine MDI/MDIx and speed. Based on the speed, + * determine on the cable length, local and remote receiver. + **/ +s32 e1000_get_phy_info_igp(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_igp"); + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + phy->polarity_correction = true; + + ret_val = e1000_check_polarity_igp(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX); + + if ((data & IGP01E1000_PSSR_SPEED_MASK) == + IGP01E1000_PSSR_SPEED_1000MBPS) { + ret_val = phy->ops.get_cable_length(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); + if (ret_val) + return ret_val; + + phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + + phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + } else { + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + } + + return ret_val; +} + +/** + * e1000_get_phy_info_ife - Retrieves various IFE PHY states + * @hw: pointer to the HW structure + * + * Populates "phy" structure with various feature states. + **/ +s32 e1000_get_phy_info_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_ife"); + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + ret_val = phy->ops.read_reg(hw, IFE_PHY_SPECIAL_CONTROL, &data); + if (ret_val) + return ret_val; + phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE); + + if (phy->polarity_correction) { + ret_val = e1000_check_polarity_ife(hw); + if (ret_val) + return ret_val; + } else { + /* Polarity is forced */ + phy->cable_polarity = ((data & IFE_PSC_FORCE_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + } + + ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS); + + /* The following parameters are undefined for 10/100 operation. */ + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + + return E1000_SUCCESS; +} + +/** + * e1000_phy_sw_reset_generic - PHY software reset + * @hw: pointer to the HW structure + * + * Does a software reset of the PHY by reading the PHY control register and + * setting/write the control register reset bit to the PHY. + **/ +s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw) +{ + s32 ret_val; + u16 phy_ctrl; + + DEBUGFUNC("e1000_phy_sw_reset_generic"); + + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; + + ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); + if (ret_val) + return ret_val; + + phy_ctrl |= MII_CR_RESET; + ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl); + if (ret_val) + return ret_val; + + usec_delay(1); + + return ret_val; +} + +/** + * e1000_phy_hw_reset_generic - PHY hardware reset + * @hw: pointer to the HW structure + * + * Verify the reset block is not blocking us from resetting. Acquire + * semaphore (if necessary) and read/set/write the device control reset + * bit in the PHY. Wait the appropriate delay time for the device to + * reset and release the semaphore (if necessary). + **/ +s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u32 ctrl; + + DEBUGFUNC("e1000_phy_hw_reset_generic"); + + if (phy->ops.check_reset_block) { + ret_val = phy->ops.check_reset_block(hw); + if (ret_val) + return E1000_SUCCESS; + } + + ret_val = phy->ops.acquire(hw); + if (ret_val) + return ret_val; + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_PHY_RST); + E1000_WRITE_FLUSH(hw); + + usec_delay(phy->reset_delay_us); + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + E1000_WRITE_FLUSH(hw); + + usec_delay(150); + + phy->ops.release(hw); + + return phy->ops.get_cfg_done(hw); +} + +/** + * e1000_get_cfg_done_generic - Generic configuration done + * @hw: pointer to the HW structure + * + * Generic function to wait 10 milli-seconds for configuration to complete + * and return success. + **/ +s32 e1000_get_cfg_done_generic(struct e1000_hw E1000_UNUSEDARG *hw) +{ + DEBUGFUNC("e1000_get_cfg_done_generic"); + + msec_delay_irq(10); + + return E1000_SUCCESS; +} + +/** + * e1000_phy_init_script_igp3 - Inits the IGP3 PHY + * @hw: pointer to the HW structure + * + * Initializes a Intel Gigabit PHY3 when an EEPROM is not present. + **/ +s32 e1000_phy_init_script_igp3(struct e1000_hw *hw) +{ + DEBUGOUT("Running IGP 3 PHY init script\n"); + + /* PHY init IGP 3 */ + /* Enable rise/fall, 10-mode work in class-A */ + hw->phy.ops.write_reg(hw, 0x2F5B, 0x9018); + /* Remove all caps from Replica path filter */ + hw->phy.ops.write_reg(hw, 0x2F52, 0x0000); + /* Bias trimming for ADC, AFE and Driver (Default) */ + hw->phy.ops.write_reg(hw, 0x2FB1, 0x8B24); + /* Increase Hybrid poly bias */ + hw->phy.ops.write_reg(hw, 0x2FB2, 0xF8F0); + /* Add 4% to Tx amplitude in Gig mode */ + hw->phy.ops.write_reg(hw, 0x2010, 0x10B0); + /* Disable trimming (TTT) */ + hw->phy.ops.write_reg(hw, 0x2011, 0x0000); + /* Poly DC correction to 94.6% + 2% for all channels */ + hw->phy.ops.write_reg(hw, 0x20DD, 0x249A); + /* ABS DC correction to 95.9% */ + hw->phy.ops.write_reg(hw, 0x20DE, 0x00D3); + /* BG temp curve trim */ + hw->phy.ops.write_reg(hw, 0x28B4, 0x04CE); + /* Increasing ADC OPAMP stage 1 currents to max */ + hw->phy.ops.write_reg(hw, 0x2F70, 0x29E4); + /* Force 1000 ( required for enabling PHY regs configuration) */ + hw->phy.ops.write_reg(hw, 0x0000, 0x0140); + /* Set upd_freq to 6 */ + hw->phy.ops.write_reg(hw, 0x1F30, 0x1606); + /* Disable NPDFE */ + hw->phy.ops.write_reg(hw, 0x1F31, 0xB814); + /* Disable adaptive fixed FFE (Default) */ + hw->phy.ops.write_reg(hw, 0x1F35, 0x002A); + /* Enable FFE hysteresis */ + hw->phy.ops.write_reg(hw, 0x1F3E, 0x0067); + /* Fixed FFE for short cable lengths */ + hw->phy.ops.write_reg(hw, 0x1F54, 0x0065); + /* Fixed FFE for medium cable lengths */ + hw->phy.ops.write_reg(hw, 0x1F55, 0x002A); + /* Fixed FFE for long cable lengths */ + hw->phy.ops.write_reg(hw, 0x1F56, 0x002A); + /* Enable Adaptive Clip Threshold */ + hw->phy.ops.write_reg(hw, 0x1F72, 0x3FB0); + /* AHT reset limit to 1 */ + hw->phy.ops.write_reg(hw, 0x1F76, 0xC0FF); + /* Set AHT master delay to 127 msec */ + hw->phy.ops.write_reg(hw, 0x1F77, 0x1DEC); + /* Set scan bits for AHT */ + hw->phy.ops.write_reg(hw, 0x1F78, 0xF9EF); + /* Set AHT Preset bits */ + hw->phy.ops.write_reg(hw, 0x1F79, 0x0210); + /* Change integ_factor of channel A to 3 */ + hw->phy.ops.write_reg(hw, 0x1895, 0x0003); + /* Change prop_factor of channels BCD to 8 */ + hw->phy.ops.write_reg(hw, 0x1796, 0x0008); + /* Change cg_icount + enable integbp for channels BCD */ + hw->phy.ops.write_reg(hw, 0x1798, 0xD008); + /* Change cg_icount + enable integbp + change prop_factor_master + * to 8 for channel A + */ + hw->phy.ops.write_reg(hw, 0x1898, 0xD918); + /* Disable AHT in Slave mode on channel A */ + hw->phy.ops.write_reg(hw, 0x187A, 0x0800); + /* Enable LPLU and disable AN to 1000 in non-D0a states, + * Enable SPD+B2B + */ + hw->phy.ops.write_reg(hw, 0x0019, 0x008D); + /* Enable restart AN on an1000_dis change */ + hw->phy.ops.write_reg(hw, 0x001B, 0x2080); + /* Enable wh_fifo read clock in 10/100 modes */ + hw->phy.ops.write_reg(hw, 0x0014, 0x0045); + /* Restart AN, Speed selection is 1000 */ + hw->phy.ops.write_reg(hw, 0x0000, 0x1340); + + return E1000_SUCCESS; +} + +/** + * e1000_get_phy_type_from_id - Get PHY type from id + * @phy_id: phy_id read from the phy + * + * Returns the phy type from the id. + **/ +enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id) +{ + enum e1000_phy_type phy_type = e1000_phy_unknown; + + switch (phy_id) { + case M88E1000_I_PHY_ID: + case M88E1000_E_PHY_ID: + case M88E1111_I_PHY_ID: + case M88E1011_I_PHY_ID: + case M88E1543_E_PHY_ID: + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1340M_E_PHY_ID: + phy_type = e1000_phy_m88; + break; + case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */ + phy_type = e1000_phy_igp_2; + break; + case GG82563_E_PHY_ID: + phy_type = e1000_phy_gg82563; + break; + case IGP03E1000_E_PHY_ID: + phy_type = e1000_phy_igp_3; + break; + case IFE_E_PHY_ID: + case IFE_PLUS_E_PHY_ID: + case IFE_C_E_PHY_ID: + phy_type = e1000_phy_ife; + break; + case I82580_I_PHY_ID: + phy_type = e1000_phy_82580; + break; + case I210_I_PHY_ID: + phy_type = e1000_phy_i210; + break; + default: + phy_type = e1000_phy_unknown; + break; + } + return phy_type; +} + +/** + * e1000_determine_phy_address - Determines PHY address. + * @hw: pointer to the HW structure + * + * This uses a trial and error method to loop through possible PHY + * addresses. It tests each by reading the PHY ID registers and + * checking for a match. + **/ +s32 e1000_determine_phy_address(struct e1000_hw *hw) +{ + u32 phy_addr = 0; + u32 i; + enum e1000_phy_type phy_type = e1000_phy_unknown; + + hw->phy.id = phy_type; + + for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) { + hw->phy.addr = phy_addr; + i = 0; + + do { + e1000_get_phy_id(hw); + phy_type = e1000_get_phy_type_from_id(hw->phy.id); + + /* If phy_type is valid, break - we found our + * PHY address + */ + if (phy_type != e1000_phy_unknown) + return E1000_SUCCESS; + + msec_delay(1); + i++; + } while (i < 10); + } + + return -E1000_ERR_PHY_TYPE; +} + +/** + * e1000_power_up_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, restore the link to previous + * settings. + **/ +void e1000_power_up_phy_copper(struct e1000_hw *hw) +{ + u16 mii_reg = 0; + u16 power_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); + mii_reg &= ~MII_CR_POWER_DOWN; + if (hw->phy.type == e1000_phy_i210) { + hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg); + power_reg &= ~GS40G_CS_POWER_DOWN; + hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg); + } + hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); +} + +/** + * e1000_power_down_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, restore the link to previous + * settings. + **/ +void e1000_power_down_phy_copper(struct e1000_hw *hw) +{ + u16 mii_reg = 0; + u16 power_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); + mii_reg |= MII_CR_POWER_DOWN; + /* i210 Phy requires an additional bit for power up/down */ + if (hw->phy.type == e1000_phy_i210) { + hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg); + power_reg |= GS40G_CS_POWER_DOWN; + hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg); + } + hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); + msec_delay(1); +} + +/** + * e1000_check_polarity_82577 - Checks the polarity. + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + * + * Polarity is determined based on the PHY specific status register. + **/ +s32 e1000_check_polarity_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_check_polarity_82577"); + + ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); + + if (!ret_val) + phy->cable_polarity = ((data & I82577_PHY_STATUS2_REV_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY + * @hw: pointer to the HW structure + * + * Calls the PHY setup function to force speed and duplex. + **/ +s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_82577"); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &phy_data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); + if (ret_val) + return ret_val; + + usec_delay(1); + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on 82577 phy\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) + DEBUGOUT("Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + } + + return ret_val; +} + +/** + * e1000_get_phy_info_82577 - Retrieve I82577 PHY information + * @hw: pointer to the HW structure + * + * Read PHY status to determine if link is up. If link is up, then + * set/determine 10base-T extended distance and polarity correction. Read + * PHY port status to determine MDI/MDIx and speed. Based on the speed, + * determine on the cable length, local and remote receiver. + **/ +s32 e1000_get_phy_info_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_82577"); + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + phy->polarity_correction = true; + + ret_val = e1000_check_polarity_82577(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX); + + if ((data & I82577_PHY_STATUS2_SPEED_MASK) == + I82577_PHY_STATUS2_SPEED_1000MBPS) { + ret_val = hw->phy.ops.get_cable_length(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); + if (ret_val) + return ret_val; + + phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + + phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + } else { + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + } + + return E1000_SUCCESS; +} + +/** + * e1000_get_cable_length_82577 - Determine cable length for 82577 PHY + * @hw: pointer to the HW structure + * + * Reads the diagnostic status register and verifies result is valid before + * placing it in the phy_cable_length field. + **/ +s32 e1000_get_cable_length_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, length; + + DEBUGFUNC("e1000_get_cable_length_82577"); + + ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data); + if (ret_val) + return ret_val; + + length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >> + I82577_DSTATUS_CABLE_LENGTH_SHIFT); + + if (length == E1000_CABLE_LENGTH_UNDEFINED) + return -E1000_ERR_PHY; + + phy->cable_length = length; + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_gs40g - Write GS40G PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data) +{ + s32 ret_val; + u16 page = offset >> GS40G_PAGE_SHIFT; + + DEBUGFUNC("e1000_write_phy_reg_gs40g"); + + offset = offset & GS40G_OFFSET_MASK; + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); + if (ret_val) + goto release; + ret_val = e1000_write_phy_reg_mdic(hw, offset, data); + +release: + hw->phy.ops.release(hw); + return ret_val; +} + +/** + * e1000_read_phy_reg_gs40g - Read GS40G PHY register + * @hw: pointer to the HW structure + * @offset: lower half is register offset to read to + * upper half is page to use. + * @data: data to read at register offset + * + * Acquires semaphore, if necessary, then reads the data in the PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data) +{ + s32 ret_val; + u16 page = offset >> GS40G_PAGE_SHIFT; + + DEBUGFUNC("e1000_read_phy_reg_gs40g"); + + offset = offset & GS40G_OFFSET_MASK; + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); + if (ret_val) + goto release; + ret_val = e1000_read_phy_reg_mdic(hw, offset, data); + +release: + hw->phy.ops.release(hw); + return ret_val; +} + +/** + * e1000_read_phy_reg_mphy - Read mPHY control register + * @hw: pointer to the HW structure + * @address: address to be read + * @data: pointer to the read data + * + * Reads the mPHY control register in the PHY at offset and stores the + * information read to data. + **/ +s32 e1000_read_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 *data) +{ + u32 mphy_ctrl = 0; + bool locked = false; + bool ready = false; + + DEBUGFUNC("e1000_read_phy_reg_mphy"); + + /* Check if mPHY is ready to read/write operations */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* Check if mPHY access is disabled and enable it if so */ + mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); + if (mphy_ctrl & E1000_MPHY_DIS_ACCESS) { + locked = true; + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + mphy_ctrl |= E1000_MPHY_ENA_ACCESS; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + } + + /* Set the address that we want to read */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* We mask address, because we want to use only current lane */ + mphy_ctrl = (mphy_ctrl & ~E1000_MPHY_ADDRESS_MASK & + ~E1000_MPHY_ADDRESS_FNC_OVERRIDE) | + (address & E1000_MPHY_ADDRESS_MASK); + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + + /* Read data from the address */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + *data = E1000_READ_REG(hw, E1000_MPHY_DATA); + + /* Disable access to mPHY if it was originally disabled */ + if (locked) { + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, + E1000_MPHY_DIS_ACCESS); + } + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_mphy - Write mPHY control register + * @hw: pointer to the HW structure + * @address: address to write to + * @data: data to write to register at offset + * @line_override: used when we want to use different line than default one + * + * Writes data to mPHY control register. + **/ +s32 e1000_write_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 data, + bool line_override) +{ + u32 mphy_ctrl = 0; + bool locked = false; + bool ready = false; + + DEBUGFUNC("e1000_write_phy_reg_mphy"); + + /* Check if mPHY is ready to read/write operations */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* Check if mPHY access is disabled and enable it if so */ + mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); + if (mphy_ctrl & E1000_MPHY_DIS_ACCESS) { + locked = true; + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + mphy_ctrl |= E1000_MPHY_ENA_ACCESS; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + } + + /* Set the address that we want to read */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* We mask address, because we want to use only current lane */ + if (line_override) + mphy_ctrl |= E1000_MPHY_ADDRESS_FNC_OVERRIDE; + else + mphy_ctrl &= ~E1000_MPHY_ADDRESS_FNC_OVERRIDE; + mphy_ctrl = (mphy_ctrl & ~E1000_MPHY_ADDRESS_MASK) | + (address & E1000_MPHY_ADDRESS_MASK); + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + + /* Read data from the address */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + E1000_WRITE_REG(hw, E1000_MPHY_DATA, data); + + /* Disable access to mPHY if it was originally disabled */ + if (locked) { + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, + E1000_MPHY_DIS_ACCESS); + } + + return E1000_SUCCESS; +} + +/** + * e1000_is_mphy_ready - Check if mPHY control register is not busy + * @hw: pointer to the HW structure + * + * Returns mPHY control register status. + **/ +bool e1000_is_mphy_ready(struct e1000_hw *hw) +{ + u16 retry_count = 0; + u32 mphy_ctrl = 0; + bool ready = false; + + while (retry_count < 2) { + mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); + if (mphy_ctrl & E1000_MPHY_BUSY) { + usec_delay(20); + retry_count++; + continue; + } + ready = true; + break; + } + + if (!ready) + DEBUGOUT("ERROR READING mPHY control register, phy is busy.\n"); + + return ready; +} diff --git a/kernel/linux/kni/ethtool/igb/e1000_phy.h b/kernel/linux/kni/ethtool/igb/e1000_phy.h new file mode 100644 index 00000000..67e9ba77 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_phy.h @@ -0,0 +1,241 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_PHY_H_ +#define _E1000_PHY_H_ + +void e1000_init_phy_ops_generic(struct e1000_hw *hw); +s32 e1000_null_read_reg(struct e1000_hw *hw, u32 offset, u16 *data); +void e1000_null_phy_generic(struct e1000_hw *hw); +s32 e1000_null_lplu_state(struct e1000_hw *hw, bool active); +s32 e1000_null_write_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_null_set_page(struct e1000_hw *hw, u16 data); +s32 e1000_read_i2c_byte_null(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +s32 e1000_write_i2c_byte_null(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); +s32 e1000_check_downshift_generic(struct e1000_hw *hw); +s32 e1000_check_polarity_m88(struct e1000_hw *hw); +s32 e1000_check_polarity_igp(struct e1000_hw *hw); +s32 e1000_check_polarity_ife(struct e1000_hw *hw); +s32 e1000_check_reset_block_generic(struct e1000_hw *hw); +s32 e1000_copper_link_setup_igp(struct e1000_hw *hw); +s32 e1000_copper_link_setup_m88(struct e1000_hw *hw); +s32 e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); +s32 e1000_get_cable_length_m88(struct e1000_hw *hw); +s32 e1000_get_cable_length_m88_gen2(struct e1000_hw *hw); +s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw); +s32 e1000_get_cfg_done_generic(struct e1000_hw *hw); +s32 e1000_get_phy_id(struct e1000_hw *hw); +s32 e1000_get_phy_info_igp(struct e1000_hw *hw); +s32 e1000_get_phy_info_m88(struct e1000_hw *hw); +s32 e1000_get_phy_info_ife(struct e1000_hw *hw); +s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw); +void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); +s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw); +s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw); +s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page); +s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active); +s32 e1000_setup_copper_link_generic(struct e1000_hw *hw); +s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, + u32 usec_interval, bool *success); +s32 e1000_phy_init_script_igp3(struct e1000_hw *hw); +enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id); +s32 e1000_determine_phy_address(struct e1000_hw *hw); +s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg); +s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg); +void e1000_power_up_phy_copper(struct e1000_hw *hw); +void e1000_power_down_phy_copper(struct e1000_hw *hw); +s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data); +s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data); +s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); +s32 e1000_check_polarity_82577(struct e1000_hw *hw); +s32 e1000_get_phy_info_82577(struct e1000_hw *hw); +s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw); +s32 e1000_get_cable_length_82577(struct e1000_hw *hw); +s32 e1000_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_read_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 *data); +s32 e1000_write_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 data, + bool line_override); +bool e1000_is_mphy_ready(struct e1000_hw *hw); + +#define E1000_MAX_PHY_ADDR 8 + +/* IGP01E1000 Specific Registers */ +#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ +#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */ +#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */ +#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */ +#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */ +#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */ +#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */ +#define IGP_PAGE_SHIFT 5 +#define PHY_REG_MASK 0x1F + +/* GS40G - I210 PHY defines */ +#define GS40G_PAGE_SELECT 0x16 +#define GS40G_PAGE_SHIFT 16 +#define GS40G_OFFSET_MASK 0xFFFF +#define GS40G_PAGE_2 0x20000 +#define GS40G_MAC_REG2 0x15 +#define GS40G_MAC_LB 0x4140 +#define GS40G_MAC_SPEED_1G 0X0006 +#define GS40G_COPPER_SPEC 0x0010 +#define GS40G_CS_POWER_DOWN 0x0002 + +#define HV_INTC_FC_PAGE_START 768 +#define I82578_ADDR_REG 29 +#define I82577_ADDR_REG 16 +#define I82577_CFG_REG 22 +#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) +#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift */ +#define I82577_CTRL_REG 23 + +/* 82577 specific PHY registers */ +#define I82577_PHY_CTRL_2 18 +#define I82577_PHY_LBK_CTRL 19 +#define I82577_PHY_STATUS_2 26 +#define I82577_PHY_DIAG_STATUS 31 + +/* I82577 PHY Status 2 */ +#define I82577_PHY_STATUS2_REV_POLARITY 0x0400 +#define I82577_PHY_STATUS2_MDIX 0x0800 +#define I82577_PHY_STATUS2_SPEED_MASK 0x0300 +#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200 + +/* I82577 PHY Control 2 */ +#define I82577_PHY_CTRL2_MANUAL_MDIX 0x0200 +#define I82577_PHY_CTRL2_AUTO_MDI_MDIX 0x0400 +#define I82577_PHY_CTRL2_MDIX_CFG_MASK 0x0600 + +/* I82577 PHY Diagnostics Status */ +#define I82577_DSTATUS_CABLE_LENGTH 0x03FC +#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2 + +/* 82580 PHY Power Management */ +#define E1000_82580_PHY_POWER_MGMT 0xE14 +#define E1000_82580_PM_SPD 0x0001 /* Smart Power Down */ +#define E1000_82580_PM_D0_LPLU 0x0002 /* For D0a states */ +#define E1000_82580_PM_D3_LPLU 0x0004 /* For all other states */ +#define E1000_82580_PM_GO_LINKD 0x0020 /* Go Link Disconnect */ + +#define E1000_MPHY_DIS_ACCESS 0x80000000 /* disable_access bit */ +#define E1000_MPHY_ENA_ACCESS 0x40000000 /* enable_access bit */ +#define E1000_MPHY_BUSY 0x00010000 /* busy bit */ +#define E1000_MPHY_ADDRESS_FNC_OVERRIDE 0x20000000 /* fnc_override bit */ +#define E1000_MPHY_ADDRESS_MASK 0x0000FFFF /* address mask */ + +#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 +#define IGP01E1000_PHY_POLARITY_MASK 0x0078 + +#define IGP01E1000_PSCR_AUTO_MDIX 0x1000 +#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */ + +#define IGP01E1000_PSCFR_SMART_SPEED 0x0080 + +#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ +#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */ +#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */ + +#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 + +#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 +#define IGP01E1000_PSSR_MDIX 0x0800 +#define IGP01E1000_PSSR_SPEED_MASK 0xC000 +#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 + +#define IGP02E1000_PHY_CHANNEL_NUM 4 +#define IGP02E1000_PHY_AGC_A 0x11B1 +#define IGP02E1000_PHY_AGC_B 0x12B1 +#define IGP02E1000_PHY_AGC_C 0x14B1 +#define IGP02E1000_PHY_AGC_D 0x18B1 + +#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course=15:13, Fine=12:9 */ +#define IGP02E1000_AGC_LENGTH_MASK 0x7F +#define IGP02E1000_AGC_RANGE 15 + +#define E1000_CABLE_LENGTH_UNDEFINED 0xFF + +#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000 +#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16 +#define E1000_KMRNCTRLSTA_REN 0x00200000 +#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */ +#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */ +#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */ +#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */ +#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */ + +#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 +#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Ctrl */ +#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Ctrl */ +#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */ + +/* IFE PHY Extended Status Control */ +#define IFE_PESC_POLARITY_REVERSED 0x0100 + +/* IFE PHY Special Control */ +#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 +#define IFE_PSC_FORCE_POLARITY 0x0020 + +/* IFE PHY Special Control and LED Control */ +#define IFE_PSCL_PROBE_MODE 0x0020 +#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ +#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ + +/* IFE PHY MDIX Control */ +#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ +#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */ +#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto, 0=disable */ + +/* SFP modules ID memory locations */ +#define E1000_SFF_IDENTIFIER_OFFSET 0x00 +#define E1000_SFF_IDENTIFIER_SFF 0x02 +#define E1000_SFF_IDENTIFIER_SFP 0x03 + +#define E1000_SFF_ETH_FLAGS_OFFSET 0x06 +/* Flags for SFP modules compatible with ETH up to 1Gb */ +struct sfp_e1000_flags { + u8 e1000_base_sx:1; + u8 e1000_base_lx:1; + u8 e1000_base_cx:1; + u8 e1000_base_t:1; + u8 e100_base_lx:1; + u8 e100_base_fx:1; + u8 e10_base_bx10:1; + u8 e10_base_px:1; +}; + +/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */ +#define E1000_SFF_VENDOR_OUI_TYCO 0x00407600 +#define E1000_SFF_VENDOR_OUI_FTL 0x00906500 +#define E1000_SFF_VENDOR_OUI_AVAGO 0x00176A00 +#define E1000_SFF_VENDOR_OUI_INTEL 0x001B2100 + +#endif diff --git a/kernel/linux/kni/ethtool/igb/e1000_regs.h b/kernel/linux/kni/ethtool/igb/e1000_regs.h new file mode 100644 index 00000000..f5c7e031 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/e1000_regs.h @@ -0,0 +1,631 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _E1000_REGS_H_ +#define _E1000_REGS_H_ + +#define E1000_CTRL 0x00000 /* Device Control - RW */ +#define E1000_STATUS 0x00008 /* Device Status - RO */ +#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ +#define E1000_EERD 0x00014 /* EEPROM Read - RW */ +#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ +#define E1000_FLA 0x0001C /* Flash Access - RW */ +#define E1000_MDIC 0x00020 /* MDI Control - RW */ +#define E1000_MDICNFG 0x00E04 /* MDI Config - RW */ +#define E1000_REGISTER_SET_SIZE 0x20000 /* CSR Size */ +#define E1000_EEPROM_INIT_CTRL_WORD_2 0x0F /* EEPROM Init Ctrl Word 2 */ +#define E1000_EEPROM_PCIE_CTRL_WORD_2 0x28 /* EEPROM PCIe Ctrl Word 2 */ +#define E1000_BARCTRL 0x5BBC /* BAR ctrl reg */ +#define E1000_BARCTRL_FLSIZE 0x0700 /* BAR ctrl Flsize */ +#define E1000_BARCTRL_CSRSIZE 0x2000 /* BAR ctrl CSR size */ +#define E1000_MPHY_ADDR_CTRL 0x0024 /* GbE MPHY Address Control */ +#define E1000_MPHY_DATA 0x0E10 /* GBE MPHY Data */ +#define E1000_MPHY_STAT 0x0E0C /* GBE MPHY Statistics */ +#define E1000_PPHY_CTRL 0x5b48 /* PCIe PHY Control */ +#define E1000_I350_BARCTRL 0x5BFC /* BAR ctrl reg */ +#define E1000_I350_DTXMXPKTSZ 0x355C /* Maximum sent packet size reg*/ +#define E1000_SCTL 0x00024 /* SerDes Control - RW */ +#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ +#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ +#define E1000_FCT 0x00030 /* Flow Control Type - RW */ +#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */ +#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ +#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ +#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ +#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ +#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ +#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ +#define E1000_RCTL 0x00100 /* Rx Control - RW */ +#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ +#define E1000_TXCW 0x00178 /* Tx Configuration Word - RW */ +#define E1000_RXCW 0x00180 /* Rx Configuration Word - RO */ +#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ +#define E1000_EITR(_n) (0x01680 + (0x4 * (_n))) +#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */ +#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */ +#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */ +#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */ +#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */ +#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */ +#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */ +#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */ +#define E1000_TCTL 0x00400 /* Tx Control - RW */ +#define E1000_TCTL_EXT 0x00404 /* Extended Tx Control - RW */ +#define E1000_TIPG 0x00410 /* Tx Inter-packet gap -RW */ +#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ +#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_LEDMUX 0x08130 /* LED MUX Control */ +#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ +#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ +#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ +#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ +#define E1000_PBS 0x01008 /* Packet Buffer Size */ +#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ +#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ +#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */ +#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */ +#define E1000_I2CBB_EN 0x00000100 /* I2C - Bit Bang Enable */ +#define E1000_I2C_CLK_OUT 0x00000200 /* I2C- Clock */ +#define E1000_I2C_DATA_OUT 0x00000400 /* I2C- Data Out */ +#define E1000_I2C_DATA_OE_N 0x00000800 /* I2C- Data Output Enable */ +#define E1000_I2C_DATA_IN 0x00001000 /* I2C- Data In */ +#define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */ +#define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */ +#define E1000_I2C_CLK_STRETCH_DIS 0x00008000 /* I2C- Dis Clk Stretching */ +#define E1000_WDSTP 0x01040 /* Watchdog Setup - RW */ +#define E1000_SWDSTS 0x01044 /* SW Device Status - RW */ +#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */ +#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */ +#define E1000_VPDDIAG 0x01060 /* VPD Diagnostic - RO */ +#define E1000_ICR_V2 0x01500 /* Intr Cause - new location - RC */ +#define E1000_ICS_V2 0x01504 /* Intr Cause Set - new location - WO */ +#define E1000_IMS_V2 0x01508 /* Intr Mask Set/Read - new location - RW */ +#define E1000_IMC_V2 0x0150C /* Intr Mask Clear - new location - WO */ +#define E1000_IAM_V2 0x01510 /* Intr Ack Auto Mask - new location - RW */ +#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ +#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ +#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ +#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ +#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ +#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ +#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ +#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ +#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ +#define E1000_PBRTH 0x02458 /* PB Rx Arbitration Threshold - RW */ +#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */ +/* Split and Replication Rx Control - RW */ +#define E1000_RDPUMB 0x025CC /* DMA Rx Descriptor uC Mailbox - RW */ +#define E1000_RDPUAD 0x025D0 /* DMA Rx Descriptor uC Addr Command - RW */ +#define E1000_RDPUWD 0x025D4 /* DMA Rx Descriptor uC Data Write - RW */ +#define E1000_RDPURD 0x025D8 /* DMA Rx Descriptor uC Data Read - RW */ +#define E1000_RDPUCTL 0x025DC /* DMA Rx Descriptor uC Control - RW */ +#define E1000_PBDIAG 0x02458 /* Packet Buffer Diagnostic - RW */ +#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */ +#define E1000_IRPBS 0x02404 /* Same as RXPBS, renamed for newer Si - RW */ +#define E1000_PBRWAC 0x024E8 /* Rx packet buffer wrap around counter - RO */ +#define E1000_RDTR 0x02820 /* Rx Delay Timer - RW */ +#define E1000_RADV 0x0282C /* Rx Interrupt Absolute Delay Timer - RW */ +#define E1000_EMIADD 0x10 /* Extended Memory Indirect Address */ +#define E1000_EMIDATA 0x11 /* Extended Memory Indirect Data */ +#define E1000_SRWR 0x12018 /* Shadow Ram Write Register - RW */ +#define E1000_I210_FLMNGCTL 0x12038 +#define E1000_I210_FLMNGDATA 0x1203C +#define E1000_I210_FLMNGCNT 0x12040 + +#define E1000_I210_FLSWCTL 0x12048 +#define E1000_I210_FLSWDATA 0x1204C +#define E1000_I210_FLSWCNT 0x12050 + +#define E1000_I210_FLA 0x1201C + +#define E1000_INVM_DATA_REG(_n) (0x12120 + 4*(_n)) +#define E1000_INVM_SIZE 64 /* Number of INVM Data Registers */ + +/* QAV Tx mode control register */ +#define E1000_I210_TQAVCTRL 0x3570 + +/* QAV Tx mode control register bitfields masks */ +/* QAV enable */ +#define E1000_TQAVCTRL_MODE (1 << 0) +/* Fetching arbitration type */ +#define E1000_TQAVCTRL_FETCH_ARB (1 << 4) +/* Fetching timer enable */ +#define E1000_TQAVCTRL_FETCH_TIMER_ENABLE (1 << 5) +/* Launch arbitration type */ +#define E1000_TQAVCTRL_LAUNCH_ARB (1 << 8) +/* Launch timer enable */ +#define E1000_TQAVCTRL_LAUNCH_TIMER_ENABLE (1 << 9) +/* SP waits for SR enable */ +#define E1000_TQAVCTRL_SP_WAIT_SR (1 << 10) +/* Fetching timer correction */ +#define E1000_TQAVCTRL_FETCH_TIMER_DELTA_OFFSET 16 +#define E1000_TQAVCTRL_FETCH_TIMER_DELTA \ + (0xFFFF << E1000_TQAVCTRL_FETCH_TIMER_DELTA_OFFSET) + +/* High credit registers where _n can be 0 or 1. */ +#define E1000_I210_TQAVHC(_n) (0x300C + 0x40 * (_n)) + +/* Queues fetch arbitration priority control register */ +#define E1000_I210_TQAVARBCTRL 0x3574 +/* Queues priority masks where _n and _p can be 0-3. */ +#define E1000_TQAVARBCTRL_QUEUE_PRI(_n, _p) ((_p) << (2 * _n)) +/* QAV Tx mode control registers where _n can be 0 or 1. */ +#define E1000_I210_TQAVCC(_n) (0x3004 + 0x40 * (_n)) + +/* QAV Tx mode control register bitfields masks */ +#define E1000_TQAVCC_IDLE_SLOPE 0xFFFF /* Idle slope */ +#define E1000_TQAVCC_KEEP_CREDITS (1 << 30) /* Keep credits opt enable */ +#define E1000_TQAVCC_QUEUE_MODE (1 << 31) /* SP vs. SR Tx mode */ + +/* Good transmitted packets counter registers */ +#define E1000_PQGPTC(_n) (0x010014 + (0x100 * (_n))) + +/* Queues packet buffer size masks where _n can be 0-3 and _s 0-63 [kB] */ +#define E1000_I210_TXPBS_SIZE(_n, _s) ((_s) << (6 * _n)) + +#define E1000_MMDAC 13 /* MMD Access Control */ +#define E1000_MMDAAD 14 /* MMD Access Address/Data */ + +/* Convenience macros + * + * Note: "_n" is the queue number of the register to be written to. + * + * Example usage: + * E1000_RDBAL_REG(current_rx_queue) + */ +#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \ + (0x0C000 + ((_n) * 0x40))) +#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \ + (0x0C004 + ((_n) * 0x40))) +#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \ + (0x0C008 + ((_n) * 0x40))) +#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \ + (0x0C00C + ((_n) * 0x40))) +#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \ + (0x0C010 + ((_n) * 0x40))) +#define E1000_RXCTL(_n) ((_n) < 4 ? (0x02814 + ((_n) * 0x100)) : \ + (0x0C014 + ((_n) * 0x40))) +#define E1000_DCA_RXCTRL(_n) E1000_RXCTL(_n) +#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \ + (0x0C018 + ((_n) * 0x40))) +#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \ + (0x0C028 + ((_n) * 0x40))) +#define E1000_RQDPC(_n) ((_n) < 4 ? (0x02830 + ((_n) * 0x100)) : \ + (0x0C030 + ((_n) * 0x40))) +#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \ + (0x0E000 + ((_n) * 0x40))) +#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \ + (0x0E004 + ((_n) * 0x40))) +#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \ + (0x0E008 + ((_n) * 0x40))) +#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \ + (0x0E010 + ((_n) * 0x40))) +#define E1000_TXCTL(_n) ((_n) < 4 ? (0x03814 + ((_n) * 0x100)) : \ + (0x0E014 + ((_n) * 0x40))) +#define E1000_DCA_TXCTRL(_n) E1000_TXCTL(_n) +#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \ + (0x0E018 + ((_n) * 0x40))) +#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \ + (0x0E028 + ((_n) * 0x40))) +#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) : \ + (0x0E038 + ((_n) * 0x40))) +#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) : \ + (0x0E03C + ((_n) * 0x40))) +#define E1000_TARC(_n) (0x03840 + ((_n) * 0x100)) +#define E1000_RSRPD 0x02C00 /* Rx Small Packet Detect - RW */ +#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ +#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ +#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4)) +#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ + (0x054E0 + ((_i - 16) * 8))) +#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ + (0x054E4 + ((_i - 16) * 8))) +#define E1000_SHRAL(_i) (0x05438 + ((_i) * 8)) +#define E1000_SHRAH(_i) (0x0543C + ((_i) * 8)) +#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8)) +#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4)) +#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4)) +#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8)) +#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8)) +#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8)) +#define E1000_PBSLAC 0x03100 /* Pkt Buffer Slave Access Control */ +#define E1000_PBSLAD(_n) (0x03110 + (0x4 * (_n))) /* Pkt Buffer DWORD */ +#define E1000_TXPBS 0x03404 /* Tx Packet Buffer Size - RW */ +/* Same as TXPBS, renamed for newer Si - RW */ +#define E1000_ITPBS 0x03404 +#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ +#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ +#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ +#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ +#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ +#define E1000_TDPUMB 0x0357C /* DMA Tx Desc uC Mail Box - RW */ +#define E1000_TDPUAD 0x03580 /* DMA Tx Desc uC Addr Command - RW */ +#define E1000_TDPUWD 0x03584 /* DMA Tx Desc uC Data Write - RW */ +#define E1000_TDPURD 0x03588 /* DMA Tx Desc uC Data Read - RW */ +#define E1000_TDPUCTL 0x0358C /* DMA Tx Desc uC Control - RW */ +#define E1000_DTXCTL 0x03590 /* DMA Tx Control - RW */ +#define E1000_DTXTCPFLGL 0x0359C /* DMA Tx Control flag low - RW */ +#define E1000_DTXTCPFLGH 0x035A0 /* DMA Tx Control flag high - RW */ +/* DMA Tx Max Total Allow Size Reqs - RW */ +#define E1000_DTXMXSZRQ 0x03540 +#define E1000_TIDV 0x03820 /* Tx Interrupt Delay Value - RW */ +#define E1000_TADV 0x0382C /* Tx Interrupt Absolute Delay Val - RW */ +#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ +#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ +#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ +#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ +#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ +#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ +#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ +#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ +#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ +#define E1000_COLC 0x04028 /* Collision Count - R/clr */ +#define E1000_DC 0x04030 /* Defer Count - R/clr */ +#define E1000_TNCRS 0x04034 /* Tx-No CRS - R/clr */ +#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ +#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ +#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ +#define E1000_XONRXC 0x04048 /* XON Rx Count - R/clr */ +#define E1000_XONTXC 0x0404C /* XON Tx Count - R/clr */ +#define E1000_XOFFRXC 0x04050 /* XOFF Rx Count - R/clr */ +#define E1000_XOFFTXC 0x04054 /* XOFF Tx Count - R/clr */ +#define E1000_FCRUC 0x04058 /* Flow Control Rx Unsupported Count- R/clr */ +#define E1000_PRC64 0x0405C /* Packets Rx (64 bytes) - R/clr */ +#define E1000_PRC127 0x04060 /* Packets Rx (65-127 bytes) - R/clr */ +#define E1000_PRC255 0x04064 /* Packets Rx (128-255 bytes) - R/clr */ +#define E1000_PRC511 0x04068 /* Packets Rx (255-511 bytes) - R/clr */ +#define E1000_PRC1023 0x0406C /* Packets Rx (512-1023 bytes) - R/clr */ +#define E1000_PRC1522 0x04070 /* Packets Rx (1024-1522 bytes) - R/clr */ +#define E1000_GPRC 0x04074 /* Good Packets Rx Count - R/clr */ +#define E1000_BPRC 0x04078 /* Broadcast Packets Rx Count - R/clr */ +#define E1000_MPRC 0x0407C /* Multicast Packets Rx Count - R/clr */ +#define E1000_GPTC 0x04080 /* Good Packets Tx Count - R/clr */ +#define E1000_GORCL 0x04088 /* Good Octets Rx Count Low - R/clr */ +#define E1000_GORCH 0x0408C /* Good Octets Rx Count High - R/clr */ +#define E1000_GOTCL 0x04090 /* Good Octets Tx Count Low - R/clr */ +#define E1000_GOTCH 0x04094 /* Good Octets Tx Count High - R/clr */ +#define E1000_RNBC 0x040A0 /* Rx No Buffers Count - R/clr */ +#define E1000_RUC 0x040A4 /* Rx Undersize Count - R/clr */ +#define E1000_RFC 0x040A8 /* Rx Fragment Count - R/clr */ +#define E1000_ROC 0x040AC /* Rx Oversize Count - R/clr */ +#define E1000_RJC 0x040B0 /* Rx Jabber Count - R/clr */ +#define E1000_MGTPRC 0x040B4 /* Management Packets Rx Count - R/clr */ +#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ +#define E1000_MGTPTC 0x040BC /* Management Packets Tx Count - R/clr */ +#define E1000_TORL 0x040C0 /* Total Octets Rx Low - R/clr */ +#define E1000_TORH 0x040C4 /* Total Octets Rx High - R/clr */ +#define E1000_TOTL 0x040C8 /* Total Octets Tx Low - R/clr */ +#define E1000_TOTH 0x040CC /* Total Octets Tx High - R/clr */ +#define E1000_TPR 0x040D0 /* Total Packets Rx - R/clr */ +#define E1000_TPT 0x040D4 /* Total Packets Tx - R/clr */ +#define E1000_PTC64 0x040D8 /* Packets Tx (64 bytes) - R/clr */ +#define E1000_PTC127 0x040DC /* Packets Tx (65-127 bytes) - R/clr */ +#define E1000_PTC255 0x040E0 /* Packets Tx (128-255 bytes) - R/clr */ +#define E1000_PTC511 0x040E4 /* Packets Tx (256-511 bytes) - R/clr */ +#define E1000_PTC1023 0x040E8 /* Packets Tx (512-1023 bytes) - R/clr */ +#define E1000_PTC1522 0x040EC /* Packets Tx (1024-1522 Bytes) - R/clr */ +#define E1000_MPTC 0x040F0 /* Multicast Packets Tx Count - R/clr */ +#define E1000_BPTC 0x040F4 /* Broadcast Packets Tx Count - R/clr */ +#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context Tx - R/clr */ +#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context Tx Fail - R/clr */ +#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Pkt Timer Expire Count */ +#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Abs Timer Expire Count */ +#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Pkt Timer Expire Count */ +#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Abs Timer Expire Count */ +#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Min Thresh Count */ +#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Desc Min Thresh Count */ +#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ + +/* Virtualization statistical counters */ +#define E1000_PFVFGPRC(_n) (0x010010 + (0x100 * (_n))) +#define E1000_PFVFGPTC(_n) (0x010014 + (0x100 * (_n))) +#define E1000_PFVFGORC(_n) (0x010018 + (0x100 * (_n))) +#define E1000_PFVFGOTC(_n) (0x010034 + (0x100 * (_n))) +#define E1000_PFVFMPRC(_n) (0x010038 + (0x100 * (_n))) +#define E1000_PFVFGPRLBC(_n) (0x010040 + (0x100 * (_n))) +#define E1000_PFVFGPTLBC(_n) (0x010044 + (0x100 * (_n))) +#define E1000_PFVFGORLBC(_n) (0x010048 + (0x100 * (_n))) +#define E1000_PFVFGOTLBC(_n) (0x010050 + (0x100 * (_n))) + +/* LinkSec */ +#define E1000_LSECTXUT 0x04300 /* Tx Untagged Pkt Cnt */ +#define E1000_LSECTXPKTE 0x04304 /* Encrypted Tx Pkts Cnt */ +#define E1000_LSECTXPKTP 0x04308 /* Protected Tx Pkt Cnt */ +#define E1000_LSECTXOCTE 0x0430C /* Encrypted Tx Octets Cnt */ +#define E1000_LSECTXOCTP 0x04310 /* Protected Tx Octets Cnt */ +#define E1000_LSECRXUT 0x04314 /* Untagged non-Strict Rx Pkt Cnt */ +#define E1000_LSECRXOCTD 0x0431C /* Rx Octets Decrypted Count */ +#define E1000_LSECRXOCTV 0x04320 /* Rx Octets Validated */ +#define E1000_LSECRXBAD 0x04324 /* Rx Bad Tag */ +#define E1000_LSECRXNOSCI 0x04328 /* Rx Packet No SCI Count */ +#define E1000_LSECRXUNSCI 0x0432C /* Rx Packet Unknown SCI Count */ +#define E1000_LSECRXUNCH 0x04330 /* Rx Unchecked Packets Count */ +#define E1000_LSECRXDELAY 0x04340 /* Rx Delayed Packet Count */ +#define E1000_LSECRXLATE 0x04350 /* Rx Late Packets Count */ +#define E1000_LSECRXOK(_n) (0x04360 + (0x04 * (_n))) /* Rx Pkt OK Cnt */ +#define E1000_LSECRXINV(_n) (0x04380 + (0x04 * (_n))) /* Rx Invalid Cnt */ +#define E1000_LSECRXNV(_n) (0x043A0 + (0x04 * (_n))) /* Rx Not Valid Cnt */ +#define E1000_LSECRXUNSA 0x043C0 /* Rx Unused SA Count */ +#define E1000_LSECRXNUSA 0x043D0 /* Rx Not Using SA Count */ +#define E1000_LSECTXCAP 0x0B000 /* Tx Capabilities Register - RO */ +#define E1000_LSECRXCAP 0x0B300 /* Rx Capabilities Register - RO */ +#define E1000_LSECTXCTRL 0x0B004 /* Tx Control - RW */ +#define E1000_LSECRXCTRL 0x0B304 /* Rx Control - RW */ +#define E1000_LSECTXSCL 0x0B008 /* Tx SCI Low - RW */ +#define E1000_LSECTXSCH 0x0B00C /* Tx SCI High - RW */ +#define E1000_LSECTXSA 0x0B010 /* Tx SA0 - RW */ +#define E1000_LSECTXPN0 0x0B018 /* Tx SA PN 0 - RW */ +#define E1000_LSECTXPN1 0x0B01C /* Tx SA PN 1 - RW */ +#define E1000_LSECRXSCL 0x0B3D0 /* Rx SCI Low - RW */ +#define E1000_LSECRXSCH 0x0B3E0 /* Rx SCI High - RW */ +/* LinkSec Tx 128-bit Key 0 - WO */ +#define E1000_LSECTXKEY0(_n) (0x0B020 + (0x04 * (_n))) +/* LinkSec Tx 128-bit Key 1 - WO */ +#define E1000_LSECTXKEY1(_n) (0x0B030 + (0x04 * (_n))) +#define E1000_LSECRXSA(_n) (0x0B310 + (0x04 * (_n))) /* Rx SAs - RW */ +#define E1000_LSECRXPN(_n) (0x0B330 + (0x04 * (_n))) /* Rx SAs - RW */ +/* LinkSec Rx Keys - where _n is the SA no. and _m the 4 dwords of the 128 bit + * key - RW. + */ +#define E1000_LSECRXKEY(_n, _m) (0x0B350 + (0x10 * (_n)) + (0x04 * (_m))) + +#define E1000_SSVPC 0x041A0 /* Switch Security Violation Pkt Cnt */ +#define E1000_IPSCTRL 0xB430 /* IpSec Control Register */ +#define E1000_IPSRXCMD 0x0B408 /* IPSec Rx Command Register - RW */ +#define E1000_IPSRXIDX 0x0B400 /* IPSec Rx Index - RW */ +/* IPSec Rx IPv4/v6 Address - RW */ +#define E1000_IPSRXIPADDR(_n) (0x0B420 + (0x04 * (_n))) +/* IPSec Rx 128-bit Key - RW */ +#define E1000_IPSRXKEY(_n) (0x0B410 + (0x04 * (_n))) +#define E1000_IPSRXSALT 0x0B404 /* IPSec Rx Salt - RW */ +#define E1000_IPSRXSPI 0x0B40C /* IPSec Rx SPI - RW */ +/* IPSec Tx 128-bit Key - RW */ +#define E1000_IPSTXKEY(_n) (0x0B460 + (0x04 * (_n))) +#define E1000_IPSTXSALT 0x0B454 /* IPSec Tx Salt - RW */ +#define E1000_IPSTXIDX 0x0B450 /* IPSec Tx SA IDX - RW */ +#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */ +#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */ +#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */ +#define E1000_CBTMPC 0x0402C /* Circuit Breaker Tx Packet Count */ +#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */ +#define E1000_CBRDPC 0x04044 /* Circuit Breaker Rx Dropped Count */ +#define E1000_CBRMPC 0x040FC /* Circuit Breaker Rx Packet Count */ +#define E1000_RPTHC 0x04104 /* Rx Packets To Host */ +#define E1000_HGPTC 0x04118 /* Host Good Packets Tx Count */ +#define E1000_HTCBDPC 0x04124 /* Host Tx Circuit Breaker Dropped Count */ +#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */ +#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */ +#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */ +#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */ +#define E1000_LENERRS 0x04138 /* Length Errors Count */ +#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */ +#define E1000_HRMPC 0x0A018 /* Header Redirection Missed Packet Count */ +#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */ +#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */ +#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */ +#define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Pg - RW */ +#define E1000_RXCSUM 0x05000 /* Rx Checksum Control - RW */ +#define E1000_RLPML 0x05004 /* Rx Long Packet Max Length */ +#define E1000_RFCTL 0x05008 /* Receive Filter Control*/ +#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ +#define E1000_RA 0x05400 /* Receive Address - RW Array */ +#define E1000_RA2 0x054E0 /* 2nd half of Rx address array - RW Array */ +#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ +#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */ +#define E1000_CIAA 0x05B88 /* Config Indirect Access Address - RW */ +#define E1000_CIAD 0x05B8C /* Config Indirect Access Data - RW */ +#define E1000_VFQA0 0x0B000 /* VLAN Filter Queue Array 0 - RW Array */ +#define E1000_VFQA1 0x0B200 /* VLAN Filter Queue Array 1 - RW Array */ +#define E1000_WUC 0x05800 /* Wakeup Control - RW */ +#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ +#define E1000_WUS 0x05810 /* Wakeup Status - RO */ +#define E1000_MANC 0x05820 /* Management Control - RW */ +#define E1000_IPAV 0x05838 /* IP Address Valid - RW */ +#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ +#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ +#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ +#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ +#define E1000_PBACL 0x05B68 /* MSIx PBA Clear - Read/Write 1's to clear */ +#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ +#define E1000_HOST_IF 0x08800 /* Host Interface */ +#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ +#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ +#define E1000_HIBBA 0x8F40 /* Host Interface Buffer Base Address */ +/* Flexible Host Filter Table */ +#define E1000_FHFT(_n) (0x09000 + ((_n) * 0x100)) +/* Ext Flexible Host Filter Table */ +#define E1000_FHFT_EXT(_n) (0x09A00 + ((_n) * 0x100)) + + +#define E1000_KMRNCTRLSTA 0x00034 /* MAC-PHY interface - RW */ +#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ +/* Management Decision Filters */ +#define E1000_MDEF(_n) (0x05890 + (4 * (_n))) +#define E1000_SW_FW_SYNC 0x05B5C /* SW-FW Synchronization - RW */ +#define E1000_CCMCTL 0x05B48 /* CCM Control Register */ +#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */ +#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */ +#define E1000_GCR 0x05B00 /* PCI-Ex Control */ +#define E1000_GCR2 0x05B64 /* PCI-Ex Control #2 */ +#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ +#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ +#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ +#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ +#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ +#define E1000_SWSM 0x05B50 /* SW Semaphore */ +#define E1000_FWSM 0x05B54 /* FW Semaphore */ +/* Driver-only SW semaphore (not used by BOOT agents) */ +#define E1000_SWSM2 0x05B58 +#define E1000_DCA_ID 0x05B70 /* DCA Requester ID Information - RO */ +#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */ +#define E1000_UFUSE 0x05B78 /* UFUSE - RO */ +#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ +#define E1000_HICR 0x08F00 /* Host Interface Control */ +#define E1000_FWSTS 0x08F0C /* FW Status */ + +/* RSS registers */ +#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ +#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ +#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */ +#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate INTR Ext*/ +#define E1000_IMIRVP 0x05AC0 /* Immediate INT Rx VLAN Priority -RW */ +#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4)) /* MSI-X Alloc Reg -RW */ +#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) /* Redirection Table - RW */ +#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW */ +#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ +#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ +/* VT Registers */ +#define E1000_SWPBS 0x03004 /* Switch Packet Buffer Size - RW */ +#define E1000_MBVFICR 0x00C80 /* Mailbox VF Cause - RWC */ +#define E1000_MBVFIMR 0x00C84 /* Mailbox VF int Mask - RW */ +#define E1000_VFLRE 0x00C88 /* VF Register Events - RWC */ +#define E1000_VFRE 0x00C8C /* VF Receive Enables */ +#define E1000_VFTE 0x00C90 /* VF Transmit Enables */ +#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */ +#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */ +#define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */ +#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */ +#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */ +#define E1000_IOVTCL 0x05BBC /* IOV Control Register */ +#define E1000_VMRCTL 0X05D80 /* Virtual Mirror Rule Control */ +#define E1000_VMRVLAN 0x05D90 /* Virtual Mirror Rule VLAN */ +#define E1000_VMRVM 0x05DA0 /* Virtual Mirror Rule VM */ +#define E1000_MDFB 0x03558 /* Malicious Driver free block */ +#define E1000_LVMMC 0x03548 /* Last VM Misbehavior cause */ +#define E1000_TXSWC 0x05ACC /* Tx Switch Control */ +#define E1000_SCCRL 0x05DB0 /* Storm Control Control */ +#define E1000_BSCTRH 0x05DB8 /* Broadcast Storm Control Threshold */ +#define E1000_MSCTRH 0x05DBC /* Multicast Storm Control Threshold */ +/* These act per VF so an array friendly macro is used */ +#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n))) +#define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n))) +#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n))) +#define E1000_VFVMBMEM(_n) (0x00800 + (_n)) +#define E1000_VMOLR(_n) (0x05AD0 + (4 * (_n))) +/* VLAN Virtual Machine Filter - RW */ +#define E1000_VLVF(_n) (0x05D00 + (4 * (_n))) +#define E1000_VMVIR(_n) (0x03700 + (4 * (_n))) +#define E1000_DVMOLR(_n) (0x0C038 + (0x40 * (_n))) /* DMA VM offload */ +#define E1000_VTCTRL(_n) (0x10000 + (0x100 * (_n))) /* VT Control */ +#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */ +#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */ +#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */ +#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */ +#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */ +#define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */ +#define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */ +#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */ +#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */ +#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */ +#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */ +#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */ +#define E1000_TIMADJL 0x0B60C /* Time sync time adjustment offset Low - RW */ +#define E1000_TIMADJH 0x0B610 /* Time sync time adjustment offset High - RW */ +#define E1000_TSAUXC 0x0B640 /* Timesync Auxiliary Control register */ +#define E1000_SYSTIMR 0x0B6F8 /* System time register Residue */ +#define E1000_TSICR 0x0B66C /* Interrupt Cause Register */ +#define E1000_TSIM 0x0B674 /* Interrupt Mask Register */ + +/* Filtering Registers */ +#define E1000_SAQF(_n) (0x05980 + (4 * (_n))) /* Source Address Queue Fltr */ +#define E1000_DAQF(_n) (0x059A0 + (4 * (_n))) /* Dest Address Queue Fltr */ +#define E1000_SPQF(_n) (0x059C0 + (4 * (_n))) /* Source Port Queue Fltr */ +#define E1000_FTQF(_n) (0x059E0 + (4 * (_n))) /* 5-tuple Queue Fltr */ +#define E1000_TTQF(_n) (0x059E0 + (4 * (_n))) /* 2-tuple Queue Fltr */ +#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */ +#define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */ + +#define E1000_RTTDCS 0x3600 /* Reedtown Tx Desc plane control and status */ +#define E1000_RTTPCS 0x3474 /* Reedtown Tx Packet Plane control and status */ +#define E1000_RTRPCS 0x2474 /* Rx packet plane control and status */ +#define E1000_RTRUP2TC 0x05AC4 /* Rx User Priority to Traffic Class */ +#define E1000_RTTUP2TC 0x0418 /* Transmit User Priority to Traffic Class */ +/* Tx Desc plane TC Rate-scheduler config */ +#define E1000_RTTDTCRC(_n) (0x3610 + ((_n) * 4)) +/* Tx Packet plane TC Rate-Scheduler Config */ +#define E1000_RTTPTCRC(_n) (0x3480 + ((_n) * 4)) +/* Rx Packet plane TC Rate-Scheduler Config */ +#define E1000_RTRPTCRC(_n) (0x2480 + ((_n) * 4)) +/* Tx Desc Plane TC Rate-Scheduler Status */ +#define E1000_RTTDTCRS(_n) (0x3630 + ((_n) * 4)) +/* Tx Desc Plane TC Rate-Scheduler MMW */ +#define E1000_RTTDTCRM(_n) (0x3650 + ((_n) * 4)) +/* Tx Packet plane TC Rate-Scheduler Status */ +#define E1000_RTTPTCRS(_n) (0x34A0 + ((_n) * 4)) +/* Tx Packet plane TC Rate-scheduler MMW */ +#define E1000_RTTPTCRM(_n) (0x34C0 + ((_n) * 4)) +/* Rx Packet plane TC Rate-Scheduler Status */ +#define E1000_RTRPTCRS(_n) (0x24A0 + ((_n) * 4)) +/* Rx Packet plane TC Rate-Scheduler MMW */ +#define E1000_RTRPTCRM(_n) (0x24C0 + ((_n) * 4)) +/* Tx Desc plane VM Rate-Scheduler MMW*/ +#define E1000_RTTDVMRM(_n) (0x3670 + ((_n) * 4)) +/* Tx BCN Rate-Scheduler MMW */ +#define E1000_RTTBCNRM(_n) (0x3690 + ((_n) * 4)) +#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select */ +#define E1000_RTTDVMRC 0x3608 /* Tx Desc Plane VM Rate-Scheduler Config */ +#define E1000_RTTDVMRS 0x360C /* Tx Desc Plane VM Rate-Scheduler Status */ +#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config */ +#define E1000_RTTBCNRS 0x36B4 /* Tx BCN Rate-Scheduler Status */ +#define E1000_RTTBCNCR 0xB200 /* Tx BCN Control Register */ +#define E1000_RTTBCNTG 0x35A4 /* Tx BCN Tagging */ +#define E1000_RTTBCNCP 0xB208 /* Tx BCN Congestion point */ +#define E1000_RTRBCNCR 0xB20C /* Rx BCN Control Register */ +#define E1000_RTTBCNRD 0x36B8 /* Tx BCN Rate Drift */ +#define E1000_PFCTOP 0x1080 /* Priority Flow Control Type and Opcode */ +#define E1000_RTTBCNIDX 0xB204 /* Tx BCN Congestion Point */ +#define E1000_RTTBCNACH 0x0B214 /* Tx BCN Control High */ +#define E1000_RTTBCNACL 0x0B210 /* Tx BCN Control Low */ + +/* DMA Coalescing registers */ +#define E1000_DMACR 0x02508 /* Control Register */ +#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */ +#define E1000_DMCTLX 0x02514 /* Time to Lx Request */ +#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */ +#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */ +#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */ +#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */ + +/* PCIe Parity Status Register */ +#define E1000_PCIEERRSTS 0x05BA8 + +#define E1000_PROXYS 0x5F64 /* Proxying Status */ +#define E1000_PROXYFC 0x5F60 /* Proxying Filter Control */ +/* Thermal sensor configuration and status registers */ +#define E1000_THMJT 0x08100 /* Junction Temperature */ +#define E1000_THLOWTC 0x08104 /* Low Threshold Control */ +#define E1000_THMIDTC 0x08108 /* Mid Threshold Control */ +#define E1000_THHIGHTC 0x0810C /* High Threshold Control */ +#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ + +/* Energy Efficient Ethernet "EEE" registers */ +#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */ +#define E1000_LTRC 0x01A0 /* Latency Tolerance Reporting Control */ +#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet "EEE"*/ +#define E1000_EEE_SU 0x0E34 /* EEE Setup */ +#define E1000_TLPIC 0x4148 /* EEE Tx LPI Count - TLPIC */ +#define E1000_RLPIC 0x414C /* EEE Rx LPI Count - RLPIC */ + +/* OS2BMC Registers */ +#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */ +#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */ +#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */ +#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */ + + + +#endif diff --git a/kernel/linux/kni/ethtool/igb/igb.h b/kernel/linux/kni/ethtool/igb/igb.h new file mode 100644 index 00000000..8aa2a308 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb.h @@ -0,0 +1,844 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* Linux PRO/1000 Ethernet Driver main header file */ + +#ifndef _IGB_H_ +#define _IGB_H_ + +#include <linux/kobject.h> + +#ifndef IGB_NO_LRO +#include <net/tcp.h> +#endif + +#undef HAVE_HW_TIME_STAMP +#ifdef HAVE_HW_TIME_STAMP +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/vmalloc.h> + +#endif +#ifdef SIOCETHTOOL +#include <linux/ethtool.h> +#endif + +struct igb_adapter; + +#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) +//#define IGB_DCA +#endif +#ifdef IGB_DCA +#include <linux/dca.h> +#endif + +#include "kcompat.h" + +#ifdef HAVE_SCTP +#include <linux/sctp.h> +#endif + +#include "e1000_api.h" +#include "e1000_82575.h" +#include "e1000_manage.h" +#include "e1000_mbx.h" + +#define IGB_ERR(args...) printk(KERN_ERR "igb: " args) + +#define PFX "igb: " +#define DPRINTK(nlevel, klevel, fmt, args...) \ + (void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \ + printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \ + __FUNCTION__ , ## args)) + +#ifdef HAVE_PTP_1588_CLOCK +#include <linux/clocksource.h> +#include <linux/net_tstamp.h> +#include <linux/ptp_clock_kernel.h> +#endif /* HAVE_PTP_1588_CLOCK */ + +#ifdef HAVE_I2C_SUPPORT +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#endif /* HAVE_I2C_SUPPORT */ + +/* Interrupt defines */ +#define IGB_START_ITR 648 /* ~6000 ints/sec */ +#define IGB_4K_ITR 980 +#define IGB_20K_ITR 196 +#define IGB_70K_ITR 56 + +/* Interrupt modes, as used by the IntMode parameter */ +#define IGB_INT_MODE_LEGACY 0 +#define IGB_INT_MODE_MSI 1 +#define IGB_INT_MODE_MSIX 2 + +/* TX/RX descriptor defines */ +#define IGB_DEFAULT_TXD 256 +#define IGB_DEFAULT_TX_WORK 128 +#define IGB_MIN_TXD 80 +#define IGB_MAX_TXD 4096 + +#define IGB_DEFAULT_RXD 256 +#define IGB_MIN_RXD 80 +#define IGB_MAX_RXD 4096 + +#define IGB_MIN_ITR_USECS 10 /* 100k irq/sec */ +#define IGB_MAX_ITR_USECS 8191 /* 120 irq/sec */ + +#define NON_Q_VECTORS 1 +#define MAX_Q_VECTORS 10 + +/* Transmit and receive queues */ +#define IGB_MAX_RX_QUEUES 16 +#define IGB_MAX_TX_QUEUES 16 + +#define IGB_MAX_VF_MC_ENTRIES 30 +#define IGB_MAX_VF_FUNCTIONS 8 +#define IGB_82576_VF_DEV_ID 0x10CA +#define IGB_I350_VF_DEV_ID 0x1520 +#define IGB_MAX_UTA_ENTRIES 128 +#define MAX_EMULATION_MAC_ADDRS 16 +#define OUI_LEN 3 +#define IGB_MAX_VMDQ_QUEUES 8 + + +struct vf_data_storage { + unsigned char vf_mac_addresses[ETH_ALEN]; + u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES]; + u16 num_vf_mc_hashes; + u16 default_vf_vlan_id; + u16 vlans_enabled; + unsigned char em_mac_addresses[MAX_EMULATION_MAC_ADDRS * ETH_ALEN]; + u32 uta_table_copy[IGB_MAX_UTA_ENTRIES]; + u32 flags; + unsigned long last_nack; +#ifdef IFLA_VF_MAX + u16 pf_vlan; /* When set, guest VLAN config not allowed. */ + u16 pf_qos; + u16 tx_rate; +#ifdef HAVE_VF_SPOOFCHK_CONFIGURE + bool spoofchk_enabled; +#endif +#endif +}; + +#define IGB_VF_FLAG_CTS 0x00000001 /* VF is clear to send data */ +#define IGB_VF_FLAG_UNI_PROMISC 0x00000002 /* VF has unicast promisc */ +#define IGB_VF_FLAG_MULTI_PROMISC 0x00000004 /* VF has multicast promisc */ +#define IGB_VF_FLAG_PF_SET_MAC 0x00000008 /* PF has set MAC address */ + +/* RX descriptor control thresholds. + * PTHRESH - MAC will consider prefetch if it has fewer than this number of + * descriptors available in its onboard memory. + * Setting this to 0 disables RX descriptor prefetch. + * HTHRESH - MAC will only prefetch if there are at least this many descriptors + * available in host memory. + * If PTHRESH is 0, this should also be 0. + * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back + * descriptors until either it has this many to write back, or the + * ITR timer expires. + */ +#define IGB_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : 8) +#define IGB_RX_HTHRESH 8 +#define IGB_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8) +#define IGB_TX_HTHRESH 1 +#define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \ + adapter->msix_entries) ? 1 : 4) + +/* this is the size past which hardware will drop packets when setting LPE=0 */ +#define MAXIMUM_ETHERNET_VLAN_SIZE 1522 + +/* NOTE: netdev_alloc_skb reserves 16 bytes, NET_IP_ALIGN means we + * reserve 2 more, and skb_shared_info adds an additional 384 more, + * this adds roughly 448 bytes of extra data meaning the smallest + * allocation we could have is 1K. + * i.e. RXBUFFER_512 --> size-1024 slab + */ +/* Supported Rx Buffer Sizes */ +#define IGB_RXBUFFER_256 256 +#define IGB_RXBUFFER_2048 2048 +#define IGB_RXBUFFER_16384 16384 +#define IGB_RX_HDR_LEN IGB_RXBUFFER_256 +#if MAX_SKB_FRAGS < 8 +#define IGB_RX_BUFSZ ALIGN(MAX_JUMBO_FRAME_SIZE / MAX_SKB_FRAGS, 1024) +#else +#define IGB_RX_BUFSZ IGB_RXBUFFER_2048 +#endif + + +/* Packet Buffer allocations */ +#define IGB_PBA_BYTES_SHIFT 0xA +#define IGB_TX_HEAD_ADDR_SHIFT 7 +#define IGB_PBA_TX_MASK 0xFFFF0000 + +#define IGB_FC_PAUSE_TIME 0x0680 /* 858 usec */ + +/* How many Rx Buffers do we bundle into one write to the hardware ? */ +#define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */ + +#define IGB_EEPROM_APME 0x0400 +#define AUTO_ALL_MODES 0 + +#ifndef IGB_MASTER_SLAVE +/* Switch to override PHY master/slave setting */ +#define IGB_MASTER_SLAVE e1000_ms_hw_default +#endif + +#define IGB_MNG_VLAN_NONE -1 + +#ifndef IGB_NO_LRO +#define IGB_LRO_MAX 32 /*Maximum number of LRO descriptors*/ +struct igb_lro_stats { + u32 flushed; + u32 coal; +}; + +/* + * igb_lro_header - header format to be aggregated by LRO + * @iph: IP header without options + * @tcp: TCP header + * @ts: Optional TCP timestamp data in TCP options + * + * This structure relies on the check above that verifies that the header + * is IPv4 and does not contain any options. + */ +struct igb_lrohdr { + struct iphdr iph; + struct tcphdr th; + __be32 ts[0]; +}; + +struct igb_lro_list { + struct sk_buff_head active; + struct igb_lro_stats stats; +}; + +#endif /* IGB_NO_LRO */ +struct igb_cb { +#ifndef IGB_NO_LRO +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + union { /* Union defining head/tail partner */ + struct sk_buff *head; + struct sk_buff *tail; + }; +#endif + __be32 tsecr; /* timestamp echo response */ + u32 tsval; /* timestamp value in host order */ + u32 next_seq; /* next expected sequence number */ + u16 free; /* 65521 minus total size */ + u16 mss; /* size of data portion of packet */ + u16 append_cnt; /* number of skb's appended */ +#endif /* IGB_NO_LRO */ +#ifdef HAVE_VLAN_RX_REGISTER + u16 vid; /* VLAN tag */ +#endif +}; +#define IGB_CB(skb) ((struct igb_cb *)(skb)->cb) + +enum igb_tx_flags { + /* cmd_type flags */ + IGB_TX_FLAGS_VLAN = 0x01, + IGB_TX_FLAGS_TSO = 0x02, + IGB_TX_FLAGS_TSTAMP = 0x04, + + /* olinfo flags */ + IGB_TX_FLAGS_IPV4 = 0x10, + IGB_TX_FLAGS_CSUM = 0x20, +}; + +/* VLAN info */ +#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000 +#define IGB_TX_FLAGS_VLAN_SHIFT 16 + +/* + * The largest size we can write to the descriptor is 65535. In order to + * maintain a power of two alignment we have to limit ourselves to 32K. + */ +#define IGB_MAX_TXD_PWR 15 +#define IGB_MAX_DATA_PER_TXD (1 << IGB_MAX_TXD_PWR) + +/* Tx Descriptors needed, worst case */ +#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IGB_MAX_DATA_PER_TXD) +#ifndef MAX_SKB_FRAGS +#define DESC_NEEDED 4 +#elif (MAX_SKB_FRAGS < 16) +#define DESC_NEEDED ((MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE)) + 4) +#else +#define DESC_NEEDED (MAX_SKB_FRAGS + 4) +#endif + +/* wrapper around a pointer to a socket buffer, + * so a DMA handle can be stored along with the buffer */ +struct igb_tx_buffer { + union e1000_adv_tx_desc *next_to_watch; + unsigned long time_stamp; + struct sk_buff *skb; + unsigned int bytecount; + u16 gso_segs; + __be16 protocol; + DEFINE_DMA_UNMAP_ADDR(dma); + DEFINE_DMA_UNMAP_LEN(len); + u32 tx_flags; +}; + +struct igb_rx_buffer { + dma_addr_t dma; +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + struct sk_buff *skb; +#else + struct page *page; + u32 page_offset; +#endif +}; + +struct igb_tx_queue_stats { + u64 packets; + u64 bytes; + u64 restart_queue; +}; + +struct igb_rx_queue_stats { + u64 packets; + u64 bytes; + u64 drops; + u64 csum_err; + u64 alloc_failed; + u64 ipv4_packets; /* IPv4 headers processed */ + u64 ipv4e_packets; /* IPv4E headers with extensions processed */ + u64 ipv6_packets; /* IPv6 headers processed */ + u64 ipv6e_packets; /* IPv6E headers with extensions processed */ + u64 tcp_packets; /* TCP headers processed */ + u64 udp_packets; /* UDP headers processed */ + u64 sctp_packets; /* SCTP headers processed */ + u64 nfs_packets; /* NFS headers processe */ +}; + +struct igb_ring_container { + struct igb_ring *ring; /* pointer to linked list of rings */ + unsigned int total_bytes; /* total bytes processed this int */ + unsigned int total_packets; /* total packets processed this int */ + u16 work_limit; /* total work allowed per interrupt */ + u8 count; /* total number of rings in vector */ + u8 itr; /* current ITR setting for ring */ +}; + +struct igb_ring { + struct igb_q_vector *q_vector; /* backlink to q_vector */ + struct net_device *netdev; /* back pointer to net_device */ + struct device *dev; /* device for dma mapping */ + union { /* array of buffer info structs */ + struct igb_tx_buffer *tx_buffer_info; + struct igb_rx_buffer *rx_buffer_info; + }; +#ifdef HAVE_PTP_1588_CLOCK + unsigned long last_rx_timestamp; +#endif /* HAVE_PTP_1588_CLOCK */ + void *desc; /* descriptor ring memory */ + unsigned long flags; /* ring specific flags */ + void __iomem *tail; /* pointer to ring tail register */ + dma_addr_t dma; /* phys address of the ring */ + unsigned int size; /* length of desc. ring in bytes */ + + u16 count; /* number of desc. in the ring */ + u8 queue_index; /* logical index of the ring*/ + u8 reg_idx; /* physical index of the ring */ + + /* everything past this point are written often */ + u16 next_to_clean; + u16 next_to_use; + u16 next_to_alloc; + + union { + /* TX */ + struct { + struct igb_tx_queue_stats tx_stats; + }; + /* RX */ + struct { + struct igb_rx_queue_stats rx_stats; +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + u16 rx_buffer_len; +#else + struct sk_buff *skb; +#endif + }; + }; +#ifdef CONFIG_IGB_VMDQ_NETDEV + struct net_device *vmdq_netdev; + int vqueue_index; /* queue index for virtual netdev */ +#endif +} ____cacheline_internodealigned_in_smp; + +struct igb_q_vector { + struct igb_adapter *adapter; /* backlink */ + int cpu; /* CPU for DCA */ + u32 eims_value; /* EIMS mask value */ + + u16 itr_val; + u8 set_itr; + void __iomem *itr_register; + + struct igb_ring_container rx, tx; + + struct napi_struct napi; +#ifndef IGB_NO_LRO + struct igb_lro_list lrolist; /* LRO list for queue vector*/ +#endif + char name[IFNAMSIZ + 9]; +#ifndef HAVE_NETDEV_NAPI_LIST + struct net_device poll_dev; +#endif + + /* for dynamic allocation of rings associated with this q_vector */ + struct igb_ring ring[0] ____cacheline_internodealigned_in_smp; +}; + +enum e1000_ring_flags_t { +#ifndef HAVE_NDO_SET_FEATURES + IGB_RING_FLAG_RX_CSUM, +#endif + IGB_RING_FLAG_RX_SCTP_CSUM, + IGB_RING_FLAG_RX_LB_VLAN_BSWAP, + IGB_RING_FLAG_TX_CTX_IDX, + IGB_RING_FLAG_TX_DETECT_HANG, +}; + +struct igb_mac_addr { + u8 addr[ETH_ALEN]; + u16 queue; + u16 state; /* bitmask */ +}; +#define IGB_MAC_STATE_DEFAULT 0x1 +#define IGB_MAC_STATE_MODIFIED 0x2 +#define IGB_MAC_STATE_IN_USE 0x4 + +#define IGB_TXD_DCMD (E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_RS) + +#define IGB_RX_DESC(R, i) \ + (&(((union e1000_adv_rx_desc *)((R)->desc))[i])) +#define IGB_TX_DESC(R, i) \ + (&(((union e1000_adv_tx_desc *)((R)->desc))[i])) +#define IGB_TX_CTXTDESC(R, i) \ + (&(((struct e1000_adv_tx_context_desc *)((R)->desc))[i])) + +#ifdef CONFIG_IGB_VMDQ_NETDEV +#define netdev_ring(ring) \ + ((ring->vmdq_netdev ? ring->vmdq_netdev : ring->netdev)) +#define ring_queue_index(ring) \ + ((ring->vmdq_netdev ? ring->vqueue_index : ring->queue_index)) +#else +#define netdev_ring(ring) (ring->netdev) +#define ring_queue_index(ring) (ring->queue_index) +#endif /* CONFIG_IGB_VMDQ_NETDEV */ + +/* igb_test_staterr - tests bits within Rx descriptor status and error fields */ +static inline __le32 igb_test_staterr(union e1000_adv_rx_desc *rx_desc, + const u32 stat_err_bits) +{ + return rx_desc->wb.upper.status_error & cpu_to_le32(stat_err_bits); +} + +/* igb_desc_unused - calculate if we have unused descriptors */ +static inline u16 igb_desc_unused(const struct igb_ring *ring) +{ + u16 ntc = ring->next_to_clean; + u16 ntu = ring->next_to_use; + + return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1; +} + +#ifdef CONFIG_BQL +static inline struct netdev_queue *txring_txq(const struct igb_ring *tx_ring) +{ + return netdev_get_tx_queue(tx_ring->netdev, tx_ring->queue_index); +} +#endif /* CONFIG_BQL */ + +// #ifdef EXT_THERMAL_SENSOR_SUPPORT +// #ifdef IGB_PROCFS +struct igb_therm_proc_data +{ + struct e1000_hw *hw; + struct e1000_thermal_diode_data *sensor_data; +}; + +// #endif /* IGB_PROCFS */ +// #endif /* EXT_THERMAL_SENSOR_SUPPORT */ + +#ifdef IGB_HWMON +#define IGB_HWMON_TYPE_LOC 0 +#define IGB_HWMON_TYPE_TEMP 1 +#define IGB_HWMON_TYPE_CAUTION 2 +#define IGB_HWMON_TYPE_MAX 3 + +struct hwmon_attr { + struct device_attribute dev_attr; + struct e1000_hw *hw; + struct e1000_thermal_diode_data *sensor; + char name[12]; + }; + +struct hwmon_buff { + struct device *device; + struct hwmon_attr *hwmon_list; + unsigned int n_hwmon; + }; +#endif /* IGB_HWMON */ + +/* board specific private data structure */ +struct igb_adapter { +#ifdef HAVE_VLAN_RX_REGISTER + /* vlgrp must be first member of structure */ + struct vlan_group *vlgrp; +#else + unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; +#endif + struct net_device *netdev; + + unsigned long state; + unsigned int flags; + + unsigned int num_q_vectors; + struct msix_entry *msix_entries; + + + /* TX */ + u16 tx_work_limit; + u32 tx_timeout_count; + int num_tx_queues; + struct igb_ring *tx_ring[IGB_MAX_TX_QUEUES]; + + /* RX */ + int num_rx_queues; + struct igb_ring *rx_ring[IGB_MAX_RX_QUEUES]; + + struct timer_list watchdog_timer; + struct timer_list dma_err_timer; + struct timer_list phy_info_timer; + u16 mng_vlan_id; + u32 bd_number; + u32 wol; + u32 en_mng_pt; + u16 link_speed; + u16 link_duplex; + u8 port_num; + + /* Interrupt Throttle Rate */ + u32 rx_itr_setting; + u32 tx_itr_setting; + + struct work_struct reset_task; + struct work_struct watchdog_task; + struct work_struct dma_err_task; + bool fc_autoneg; + u8 tx_timeout_factor; + +#ifdef DEBUG + bool tx_hang_detected; + bool disable_hw_reset; +#endif + u32 max_frame_size; + + /* OS defined structs */ + struct pci_dev *pdev; +#ifndef HAVE_NETDEV_STATS_IN_NETDEV + struct net_device_stats net_stats; +#endif +#ifndef IGB_NO_LRO + struct igb_lro_stats lro_stats; +#endif + + /* structs defined in e1000_hw.h */ + struct e1000_hw hw; + struct e1000_hw_stats stats; + struct e1000_phy_info phy_info; + struct e1000_phy_stats phy_stats; + +#ifdef ETHTOOL_TEST + u32 test_icr; + struct igb_ring test_tx_ring; + struct igb_ring test_rx_ring; +#endif + + int msg_enable; + + struct igb_q_vector *q_vector[MAX_Q_VECTORS]; + u32 eims_enable_mask; + u32 eims_other; + + /* to not mess up cache alignment, always add to the bottom */ + u32 *config_space; + u16 tx_ring_count; + u16 rx_ring_count; + struct vf_data_storage *vf_data; +#ifdef IFLA_VF_MAX + int vf_rate_link_speed; +#endif + u32 lli_port; + u32 lli_size; + unsigned int vfs_allocated_count; + /* Malicious Driver Detection flag. Valid only when SR-IOV is enabled */ + bool mdd; + int int_mode; + u32 rss_queues; + u32 vmdq_pools; + char fw_version[43]; + u32 wvbr; + struct igb_mac_addr *mac_table; +#ifdef CONFIG_IGB_VMDQ_NETDEV + struct net_device *vmdq_netdev[IGB_MAX_VMDQ_QUEUES]; +#endif + int vferr_refcount; + int dmac; + u32 *shadow_vfta; + + /* External Thermal Sensor support flag */ + bool ets; +#ifdef IGB_HWMON + struct hwmon_buff igb_hwmon_buff; +#else /* IGB_HWMON */ +#ifdef IGB_PROCFS + struct proc_dir_entry *eth_dir; + struct proc_dir_entry *info_dir; + struct proc_dir_entry *therm_dir[E1000_MAX_SENSORS]; + struct igb_therm_proc_data therm_data[E1000_MAX_SENSORS]; + bool old_lsc; +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ + u32 etrack_id; + +#ifdef HAVE_PTP_1588_CLOCK + struct ptp_clock *ptp_clock; + struct ptp_clock_info ptp_caps; + struct delayed_work ptp_overflow_work; + struct work_struct ptp_tx_work; + struct sk_buff *ptp_tx_skb; + unsigned long ptp_tx_start; + unsigned long last_rx_ptp_check; + spinlock_t tmreg_lock; + struct cyclecounter cc; + struct timecounter tc; + u32 tx_hwtstamp_timeouts; + u32 rx_hwtstamp_cleared; +#endif /* HAVE_PTP_1588_CLOCK */ + +#ifdef HAVE_I2C_SUPPORT + struct i2c_algo_bit_data i2c_algo; + struct i2c_adapter i2c_adap; + struct i2c_client *i2c_client; +#endif /* HAVE_I2C_SUPPORT */ + unsigned long link_check_timeout; + + + int devrc; + + int copper_tries; + u16 eee_advert; +}; + +#ifdef CONFIG_IGB_VMDQ_NETDEV +struct igb_vmdq_adapter { +#ifdef HAVE_VLAN_RX_REGISTER + /* vlgrp must be first member of structure */ + struct vlan_group *vlgrp; +#else + unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; +#endif + struct igb_adapter *real_adapter; + struct net_device *vnetdev; + struct net_device_stats net_stats; + struct igb_ring *tx_ring; + struct igb_ring *rx_ring; +}; +#endif + +#define IGB_FLAG_HAS_MSI (1 << 0) +#define IGB_FLAG_DCA_ENABLED (1 << 1) +#define IGB_FLAG_LLI_PUSH (1 << 2) +#define IGB_FLAG_QUAD_PORT_A (1 << 3) +#define IGB_FLAG_QUEUE_PAIRS (1 << 4) +#define IGB_FLAG_EEE (1 << 5) +#define IGB_FLAG_DMAC (1 << 6) +#define IGB_FLAG_DETECT_BAD_DMA (1 << 7) +#define IGB_FLAG_PTP (1 << 8) +#define IGB_FLAG_RSS_FIELD_IPV4_UDP (1 << 9) +#define IGB_FLAG_RSS_FIELD_IPV6_UDP (1 << 10) +#define IGB_FLAG_WOL_SUPPORTED (1 << 11) +#define IGB_FLAG_NEED_LINK_UPDATE (1 << 12) +#define IGB_FLAG_LOOPBACK_ENABLE (1 << 13) +#define IGB_FLAG_MEDIA_RESET (1 << 14) +#define IGB_FLAG_MAS_ENABLE (1 << 15) + +/* Media Auto Sense */ +#define IGB_MAS_ENABLE_0 0X0001 +#define IGB_MAS_ENABLE_1 0X0002 +#define IGB_MAS_ENABLE_2 0X0004 +#define IGB_MAS_ENABLE_3 0X0008 + +#define IGB_MIN_TXPBSIZE 20408 +#define IGB_TX_BUF_4096 4096 + +#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coal Flush */ + +/* DMA Coalescing defines */ +#define IGB_DMAC_DISABLE 0 +#define IGB_DMAC_MIN 250 +#define IGB_DMAC_500 500 +#define IGB_DMAC_EN_DEFAULT 1000 +#define IGB_DMAC_2000 2000 +#define IGB_DMAC_3000 3000 +#define IGB_DMAC_4000 4000 +#define IGB_DMAC_5000 5000 +#define IGB_DMAC_6000 6000 +#define IGB_DMAC_7000 7000 +#define IGB_DMAC_8000 8000 +#define IGB_DMAC_9000 9000 +#define IGB_DMAC_MAX 10000 + +#define IGB_82576_TSYNC_SHIFT 19 +#define IGB_82580_TSYNC_SHIFT 24 +#define IGB_TS_HDR_LEN 16 + +/* CEM Support */ +#define FW_HDR_LEN 0x4 +#define FW_CMD_DRV_INFO 0xDD +#define FW_CMD_DRV_INFO_LEN 0x5 +#define FW_CMD_RESERVED 0X0 +#define FW_RESP_SUCCESS 0x1 +#define FW_UNUSED_VER 0x0 +#define FW_MAX_RETRIES 3 +#define FW_STATUS_SUCCESS 0x1 +#define FW_FAMILY_DRV_VER 0Xffffffff + +#define IGB_MAX_LINK_TRIES 20 + +struct e1000_fw_hdr { + u8 cmd; + u8 buf_len; + union + { + u8 cmd_resv; + u8 ret_status; + } cmd_or_resp; + u8 checksum; +}; + +#pragma pack(push,1) +struct e1000_fw_drv_info { + struct e1000_fw_hdr hdr; + u8 port_num; + u32 drv_version; + u16 pad; /* end spacing to ensure length is mult. of dword */ + u8 pad2; /* end spacing to ensure length is mult. of dword2 */ +}; +#pragma pack(pop) + +enum e1000_state_t { + __IGB_TESTING, + __IGB_RESETTING, + __IGB_DOWN +}; + +extern char igb_driver_name[]; +extern char igb_driver_version[]; + +extern int igb_up(struct igb_adapter *); +extern void igb_down(struct igb_adapter *); +extern void igb_reinit_locked(struct igb_adapter *); +extern void igb_reset(struct igb_adapter *); +extern int igb_set_spd_dplx(struct igb_adapter *, u16); +extern int igb_setup_tx_resources(struct igb_ring *); +extern int igb_setup_rx_resources(struct igb_ring *); +extern void igb_free_tx_resources(struct igb_ring *); +extern void igb_free_rx_resources(struct igb_ring *); +extern void igb_configure_tx_ring(struct igb_adapter *, struct igb_ring *); +extern void igb_configure_rx_ring(struct igb_adapter *, struct igb_ring *); +extern void igb_setup_tctl(struct igb_adapter *); +extern void igb_setup_rctl(struct igb_adapter *); +extern netdev_tx_t igb_xmit_frame_ring(struct sk_buff *, struct igb_ring *); +extern void igb_unmap_and_free_tx_resource(struct igb_ring *, + struct igb_tx_buffer *); +extern void igb_alloc_rx_buffers(struct igb_ring *, u16); +extern void igb_clean_rx_ring(struct igb_ring *); +extern void igb_update_stats(struct igb_adapter *); +extern bool igb_has_link(struct igb_adapter *adapter); +extern void igb_set_ethtool_ops(struct net_device *); +extern void igb_check_options(struct igb_adapter *); +extern void igb_power_up_link(struct igb_adapter *); +#ifdef HAVE_PTP_1588_CLOCK +extern void igb_ptp_init(struct igb_adapter *adapter); +extern void igb_ptp_stop(struct igb_adapter *adapter); +extern void igb_ptp_reset(struct igb_adapter *adapter); +extern void igb_ptp_tx_work(struct work_struct *work); +extern void igb_ptp_rx_hang(struct igb_adapter *adapter); +extern void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter); +extern void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector, + struct sk_buff *skb); +extern void igb_ptp_rx_pktstamp(struct igb_q_vector *q_vector, + unsigned char *va, + struct sk_buff *skb); +static inline void igb_ptp_rx_hwtstamp(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + igb_ptp_rx_pktstamp(rx_ring->q_vector, skb->data, skb); + skb_pull(skb, IGB_TS_HDR_LEN); +#endif + return; + } + + if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TS)) + igb_ptp_rx_rgtstamp(rx_ring->q_vector, skb); + + /* Update the last_rx_timestamp timer in order to enable watchdog check + * for error case of latched timestamp on a dropped packet. + */ + rx_ring->last_rx_timestamp = jiffies; +} + +extern int igb_ptp_hwtstamp_ioctl(struct net_device *netdev, + struct ifreq *ifr, int cmd); +#endif /* HAVE_PTP_1588_CLOCK */ +#ifdef ETHTOOL_OPS_COMPAT +extern int ethtool_ioctl(struct ifreq *); +#endif +extern int igb_write_mc_addr_list(struct net_device *netdev); +extern int igb_add_mac_filter(struct igb_adapter *adapter, u8 *addr, u16 queue); +extern int igb_del_mac_filter(struct igb_adapter *adapter, u8* addr, u16 queue); +extern int igb_available_rars(struct igb_adapter *adapter); +extern s32 igb_vlvf_set(struct igb_adapter *, u32, bool, u32); +extern void igb_configure_vt_default_pool(struct igb_adapter *adapter); +extern void igb_enable_vlan_tags(struct igb_adapter *adapter); +#ifndef HAVE_VLAN_RX_REGISTER +extern void igb_vlan_mode(struct net_device *, u32); +#endif + +#define E1000_PCS_CFG_IGN_SD 1 + +#ifdef IGB_HWMON +void igb_sysfs_exit(struct igb_adapter *adapter); +int igb_sysfs_init(struct igb_adapter *adapter); +#else +#ifdef IGB_PROCFS +int igb_procfs_init(struct igb_adapter* adapter); +void igb_procfs_exit(struct igb_adapter* adapter); +int igb_procfs_topdir_init(void); +void igb_procfs_topdir_exit(void); +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ + + + +#endif /* _IGB_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/igb_ethtool.c b/kernel/linux/kni/ethtool/igb/igb_ethtool.c new file mode 100644 index 00000000..002f75c4 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb_ethtool.c @@ -0,0 +1,2843 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ethtool support for igb */ + +#include <linux/netdevice.h> +#include <linux/vmalloc.h> + +#ifdef SIOCETHTOOL +#include <linux/ethtool.h> +#ifdef CONFIG_PM_RUNTIME +#include <linux/pm_runtime.h> +#endif /* CONFIG_PM_RUNTIME */ +#include <linux/highmem.h> + +#include "igb.h" +#include "igb_regtest.h" +#include <linux/if_vlan.h> +#ifdef ETHTOOL_GEEE +#include <linux/mdio.h> +#endif + +#ifdef ETHTOOL_OPS_COMPAT +#include "kcompat_ethtool.c" +#endif +#ifdef ETHTOOL_GSTATS +struct igb_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define IGB_STAT(_name, _stat) { \ + .stat_string = _name, \ + .sizeof_stat = FIELD_SIZEOF(struct igb_adapter, _stat), \ + .stat_offset = offsetof(struct igb_adapter, _stat) \ +} +static const struct igb_stats igb_gstrings_stats[] = { + IGB_STAT("rx_packets", stats.gprc), + IGB_STAT("tx_packets", stats.gptc), + IGB_STAT("rx_bytes", stats.gorc), + IGB_STAT("tx_bytes", stats.gotc), + IGB_STAT("rx_broadcast", stats.bprc), + IGB_STAT("tx_broadcast", stats.bptc), + IGB_STAT("rx_multicast", stats.mprc), + IGB_STAT("tx_multicast", stats.mptc), + IGB_STAT("multicast", stats.mprc), + IGB_STAT("collisions", stats.colc), + IGB_STAT("rx_crc_errors", stats.crcerrs), + IGB_STAT("rx_no_buffer_count", stats.rnbc), + IGB_STAT("rx_missed_errors", stats.mpc), + IGB_STAT("tx_aborted_errors", stats.ecol), + IGB_STAT("tx_carrier_errors", stats.tncrs), + IGB_STAT("tx_window_errors", stats.latecol), + IGB_STAT("tx_abort_late_coll", stats.latecol), + IGB_STAT("tx_deferred_ok", stats.dc), + IGB_STAT("tx_single_coll_ok", stats.scc), + IGB_STAT("tx_multi_coll_ok", stats.mcc), + IGB_STAT("tx_timeout_count", tx_timeout_count), + IGB_STAT("rx_long_length_errors", stats.roc), + IGB_STAT("rx_short_length_errors", stats.ruc), + IGB_STAT("rx_align_errors", stats.algnerrc), + IGB_STAT("tx_tcp_seg_good", stats.tsctc), + IGB_STAT("tx_tcp_seg_failed", stats.tsctfc), + IGB_STAT("rx_flow_control_xon", stats.xonrxc), + IGB_STAT("rx_flow_control_xoff", stats.xoffrxc), + IGB_STAT("tx_flow_control_xon", stats.xontxc), + IGB_STAT("tx_flow_control_xoff", stats.xofftxc), + IGB_STAT("rx_long_byte_count", stats.gorc), + IGB_STAT("tx_dma_out_of_sync", stats.doosync), +#ifndef IGB_NO_LRO + IGB_STAT("lro_aggregated", lro_stats.coal), + IGB_STAT("lro_flushed", lro_stats.flushed), +#endif /* IGB_LRO */ + IGB_STAT("tx_smbus", stats.mgptc), + IGB_STAT("rx_smbus", stats.mgprc), + IGB_STAT("dropped_smbus", stats.mgpdc), + IGB_STAT("os2bmc_rx_by_bmc", stats.o2bgptc), + IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc), + IGB_STAT("os2bmc_tx_by_host", stats.o2bspc), + IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc), +#ifdef HAVE_PTP_1588_CLOCK + IGB_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts), + IGB_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared), +#endif /* HAVE_PTP_1588_CLOCK */ +}; + +#define IGB_NETDEV_STAT(_net_stat) { \ + .stat_string = #_net_stat, \ + .sizeof_stat = FIELD_SIZEOF(struct net_device_stats, _net_stat), \ + .stat_offset = offsetof(struct net_device_stats, _net_stat) \ +} +static const struct igb_stats igb_gstrings_net_stats[] = { + IGB_NETDEV_STAT(rx_errors), + IGB_NETDEV_STAT(tx_errors), + IGB_NETDEV_STAT(tx_dropped), + IGB_NETDEV_STAT(rx_length_errors), + IGB_NETDEV_STAT(rx_over_errors), + IGB_NETDEV_STAT(rx_frame_errors), + IGB_NETDEV_STAT(rx_fifo_errors), + IGB_NETDEV_STAT(tx_fifo_errors), + IGB_NETDEV_STAT(tx_heartbeat_errors) +}; + +#define IGB_GLOBAL_STATS_LEN ARRAY_SIZE(igb_gstrings_stats) +#define IGB_NETDEV_STATS_LEN ARRAY_SIZE(igb_gstrings_net_stats) +#define IGB_RX_QUEUE_STATS_LEN \ + (sizeof(struct igb_rx_queue_stats) / sizeof(u64)) +#define IGB_TX_QUEUE_STATS_LEN \ + (sizeof(struct igb_tx_queue_stats) / sizeof(u64)) +#define IGB_QUEUE_STATS_LEN \ + ((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues * \ + IGB_RX_QUEUE_STATS_LEN) + \ + (((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues * \ + IGB_TX_QUEUE_STATS_LEN)) +#define IGB_STATS_LEN \ + (IGB_GLOBAL_STATS_LEN + IGB_NETDEV_STATS_LEN + IGB_QUEUE_STATS_LEN) + +#endif /* ETHTOOL_GSTATS */ +#ifdef ETHTOOL_TEST +static const char igb_gstrings_test[][ETH_GSTRING_LEN] = { + "Register test (offline)", "Eeprom test (offline)", + "Interrupt test (offline)", "Loopback test (offline)", + "Link test (on/offline)" +}; +#define IGB_TEST_LEN (sizeof(igb_gstrings_test) / ETH_GSTRING_LEN) +#endif /* ETHTOOL_TEST */ + +static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 status; + + if (hw->phy.media_type == e1000_media_type_copper) { + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full| + SUPPORTED_Autoneg | + SUPPORTED_TP | + SUPPORTED_Pause); + ecmd->advertising = ADVERTISED_TP; + + if (hw->mac.autoneg == 1) { + ecmd->advertising |= ADVERTISED_Autoneg; + /* the e1000 autoneg seems to match ethtool nicely */ + ecmd->advertising |= hw->phy.autoneg_advertised; + } + + ecmd->port = PORT_TP; + ecmd->phy_address = hw->phy.addr; + ecmd->transceiver = XCVR_INTERNAL; + + } else { + ecmd->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_100baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg | + SUPPORTED_Pause); + if (hw->mac.type == e1000_i354) + ecmd->supported |= (SUPPORTED_2500baseX_Full); + + ecmd->advertising = ADVERTISED_FIBRE; + + switch (adapter->link_speed) { + case SPEED_2500: + ecmd->advertising = ADVERTISED_2500baseX_Full; + break; + case SPEED_1000: + ecmd->advertising = ADVERTISED_1000baseT_Full; + break; + case SPEED_100: + ecmd->advertising = ADVERTISED_100baseT_Full; + break; + default: + break; + } + + if (hw->mac.autoneg == 1) + ecmd->advertising |= ADVERTISED_Autoneg; + + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; + } + + if (hw->mac.autoneg != 1) + ecmd->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + + if (hw->fc.requested_mode == e1000_fc_full) + ecmd->advertising |= ADVERTISED_Pause; + else if (hw->fc.requested_mode == e1000_fc_rx_pause) + ecmd->advertising |= (ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + else if (hw->fc.requested_mode == e1000_fc_tx_pause) + ecmd->advertising |= ADVERTISED_Asym_Pause; + else + ecmd->advertising &= ~(ADVERTISED_Pause | + ADVERTISED_Asym_Pause); + + status = E1000_READ_REG(hw, E1000_STATUS); + + if (status & E1000_STATUS_LU) { + if ((hw->mac.type == e1000_i354) && + (status & E1000_STATUS_2P5_SKU) && + !(status & E1000_STATUS_2P5_SKU_OVER)) + ecmd->speed = SPEED_2500; + else if (status & E1000_STATUS_SPEED_1000) + ecmd->speed = SPEED_1000; + else if (status & E1000_STATUS_SPEED_100) + ecmd->speed = SPEED_100; + else + ecmd->speed = SPEED_10; + + if ((status & E1000_STATUS_FD) || + hw->phy.media_type != e1000_media_type_copper) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + if ((hw->phy.media_type == e1000_media_type_fiber) || + hw->mac.autoneg) + ecmd->autoneg = AUTONEG_ENABLE; + else + ecmd->autoneg = AUTONEG_DISABLE; +#ifdef ETH_TP_MDI_X + + /* MDI-X => 2; MDI =>1; Invalid =>0 */ + if (hw->phy.media_type == e1000_media_type_copper) + ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X : + ETH_TP_MDI; + else + ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; + +#ifdef ETH_TP_MDI_AUTO + if (hw->phy.mdix == AUTO_ALL_MODES) + ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO; + else + ecmd->eth_tp_mdix_ctrl = hw->phy.mdix; + +#endif +#endif /* ETH_TP_MDI_X */ + return 0; +} + +static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if (ecmd->duplex == DUPLEX_HALF) { + if (!hw->dev_spec._82575.eee_disable) + dev_info(pci_dev_to_dev(adapter->pdev), "EEE disabled: not supported with half duplex\n"); + hw->dev_spec._82575.eee_disable = true; + } else { + if (hw->dev_spec._82575.eee_disable) + dev_info(pci_dev_to_dev(adapter->pdev), "EEE enabled\n"); + hw->dev_spec._82575.eee_disable = false; + } + + /* When SoL/IDER sessions are active, autoneg/speed/duplex + * cannot be changed */ + if (e1000_check_reset_block(hw)) { + dev_err(pci_dev_to_dev(adapter->pdev), "Cannot change link " + "characteristics when SoL/IDER is active.\n"); + return -EINVAL; + } + +#ifdef ETH_TP_MDI_AUTO + /* + * MDI setting is only allowed when autoneg enabled because + * some hardware doesn't allow MDI setting when speed or + * duplex is forced. + */ + if (ecmd->eth_tp_mdix_ctrl) { + if (hw->phy.media_type != e1000_media_type_copper) + return -EOPNOTSUPP; + + if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) && + (ecmd->autoneg != AUTONEG_ENABLE)) { + dev_err(&adapter->pdev->dev, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n"); + return -EINVAL; + } + } + +#endif /* ETH_TP_MDI_AUTO */ + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + + if (ecmd->autoneg == AUTONEG_ENABLE) { + hw->mac.autoneg = 1; + if (hw->phy.media_type == e1000_media_type_fiber) { + hw->phy.autoneg_advertised = ecmd->advertising | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg; + switch (adapter->link_speed) { + case SPEED_2500: + hw->phy.autoneg_advertised = + ADVERTISED_2500baseX_Full; + break; + case SPEED_1000: + hw->phy.autoneg_advertised = + ADVERTISED_1000baseT_Full; + break; + case SPEED_100: + hw->phy.autoneg_advertised = + ADVERTISED_100baseT_Full; + break; + default: + break; + } + } else { + hw->phy.autoneg_advertised = ecmd->advertising | + ADVERTISED_TP | + ADVERTISED_Autoneg; + } + ecmd->advertising = hw->phy.autoneg_advertised; + if (adapter->fc_autoneg) + hw->fc.requested_mode = e1000_fc_default; + } else { + if (igb_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { + clear_bit(__IGB_RESETTING, &adapter->state); + return -EINVAL; + } + } + +#ifdef ETH_TP_MDI_AUTO + /* MDI-X => 2; MDI => 1; Auto => 3 */ + if (ecmd->eth_tp_mdix_ctrl) { + /* fix up the value for auto (3 => 0) as zero is mapped + * internally to auto + */ + if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO) + hw->phy.mdix = AUTO_ALL_MODES; + else + hw->phy.mdix = ecmd->eth_tp_mdix_ctrl; + } + +#endif /* ETH_TP_MDI_AUTO */ + /* reset the link */ + if (netif_running(adapter->netdev)) { + igb_down(adapter); + igb_up(adapter); + } else + igb_reset(adapter); + + clear_bit(__IGB_RESETTING, &adapter->state); + return 0; +} + +static u32 igb_get_link(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_mac_info *mac = &adapter->hw.mac; + + /* + * If the link is not reported up to netdev, interrupts are disabled, + * and so the physical link state may have changed since we last + * looked. Set get_link_status to make sure that the true link + * state is interrogated, rather than pulling a cached and possibly + * stale link state from the driver. + */ + if (!netif_carrier_ok(netdev)) + mac->get_link_status = 1; + + return igb_has_link(adapter); +} + +static void igb_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + pause->autoneg = + (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); + + if (hw->fc.current_mode == e1000_fc_rx_pause) + pause->rx_pause = 1; + else if (hw->fc.current_mode == e1000_fc_tx_pause) + pause->tx_pause = 1; + else if (hw->fc.current_mode == e1000_fc_full) { + pause->rx_pause = 1; + pause->tx_pause = 1; + } +} + +static int igb_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + int retval = 0; + + adapter->fc_autoneg = pause->autoneg; + + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + + if (adapter->fc_autoneg == AUTONEG_ENABLE) { + hw->fc.requested_mode = e1000_fc_default; + if (netif_running(adapter->netdev)) { + igb_down(adapter); + igb_up(adapter); + } else { + igb_reset(adapter); + } + } else { + if (pause->rx_pause && pause->tx_pause) + hw->fc.requested_mode = e1000_fc_full; + else if (pause->rx_pause && !pause->tx_pause) + hw->fc.requested_mode = e1000_fc_rx_pause; + else if (!pause->rx_pause && pause->tx_pause) + hw->fc.requested_mode = e1000_fc_tx_pause; + else if (!pause->rx_pause && !pause->tx_pause) + hw->fc.requested_mode = e1000_fc_none; + + hw->fc.current_mode = hw->fc.requested_mode; + + if (hw->phy.media_type == e1000_media_type_fiber) { + retval = hw->mac.ops.setup_link(hw); + /* implicit goto out */ + } else { + retval = e1000_force_mac_fc(hw); + if (retval) + goto out; + e1000_set_fc_watermarks_generic(hw); + } + } + +out: + clear_bit(__IGB_RESETTING, &adapter->state); + return retval; +} + +static u32 igb_get_msglevel(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void igb_set_msglevel(struct net_device *netdev, u32 data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = data; +} + +static int igb_get_regs_len(struct net_device *netdev) +{ +#define IGB_REGS_LEN 555 + return IGB_REGS_LEN * sizeof(u32); +} + +static void igb_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u8 i; + + memset(p, 0, IGB_REGS_LEN * sizeof(u32)); + + regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id; + + /* General Registers */ + regs_buff[0] = E1000_READ_REG(hw, E1000_CTRL); + regs_buff[1] = E1000_READ_REG(hw, E1000_STATUS); + regs_buff[2] = E1000_READ_REG(hw, E1000_CTRL_EXT); + regs_buff[3] = E1000_READ_REG(hw, E1000_MDIC); + regs_buff[4] = E1000_READ_REG(hw, E1000_SCTL); + regs_buff[5] = E1000_READ_REG(hw, E1000_CONNSW); + regs_buff[6] = E1000_READ_REG(hw, E1000_VET); + regs_buff[7] = E1000_READ_REG(hw, E1000_LEDCTL); + regs_buff[8] = E1000_READ_REG(hw, E1000_PBA); + regs_buff[9] = E1000_READ_REG(hw, E1000_PBS); + regs_buff[10] = E1000_READ_REG(hw, E1000_FRTIMER); + regs_buff[11] = E1000_READ_REG(hw, E1000_TCPTIMER); + + /* NVM Register */ + regs_buff[12] = E1000_READ_REG(hw, E1000_EECD); + + /* Interrupt */ + /* Reading EICS for EICR because they read the + * same but EICS does not clear on read */ + regs_buff[13] = E1000_READ_REG(hw, E1000_EICS); + regs_buff[14] = E1000_READ_REG(hw, E1000_EICS); + regs_buff[15] = E1000_READ_REG(hw, E1000_EIMS); + regs_buff[16] = E1000_READ_REG(hw, E1000_EIMC); + regs_buff[17] = E1000_READ_REG(hw, E1000_EIAC); + regs_buff[18] = E1000_READ_REG(hw, E1000_EIAM); + /* Reading ICS for ICR because they read the + * same but ICS does not clear on read */ + regs_buff[19] = E1000_READ_REG(hw, E1000_ICS); + regs_buff[20] = E1000_READ_REG(hw, E1000_ICS); + regs_buff[21] = E1000_READ_REG(hw, E1000_IMS); + regs_buff[22] = E1000_READ_REG(hw, E1000_IMC); + regs_buff[23] = E1000_READ_REG(hw, E1000_IAC); + regs_buff[24] = E1000_READ_REG(hw, E1000_IAM); + regs_buff[25] = E1000_READ_REG(hw, E1000_IMIRVP); + + /* Flow Control */ + regs_buff[26] = E1000_READ_REG(hw, E1000_FCAL); + regs_buff[27] = E1000_READ_REG(hw, E1000_FCAH); + regs_buff[28] = E1000_READ_REG(hw, E1000_FCTTV); + regs_buff[29] = E1000_READ_REG(hw, E1000_FCRTL); + regs_buff[30] = E1000_READ_REG(hw, E1000_FCRTH); + regs_buff[31] = E1000_READ_REG(hw, E1000_FCRTV); + + /* Receive */ + regs_buff[32] = E1000_READ_REG(hw, E1000_RCTL); + regs_buff[33] = E1000_READ_REG(hw, E1000_RXCSUM); + regs_buff[34] = E1000_READ_REG(hw, E1000_RLPML); + regs_buff[35] = E1000_READ_REG(hw, E1000_RFCTL); + regs_buff[36] = E1000_READ_REG(hw, E1000_MRQC); + regs_buff[37] = E1000_READ_REG(hw, E1000_VT_CTL); + + /* Transmit */ + regs_buff[38] = E1000_READ_REG(hw, E1000_TCTL); + regs_buff[39] = E1000_READ_REG(hw, E1000_TCTL_EXT); + regs_buff[40] = E1000_READ_REG(hw, E1000_TIPG); + regs_buff[41] = E1000_READ_REG(hw, E1000_DTXCTL); + + /* Wake Up */ + regs_buff[42] = E1000_READ_REG(hw, E1000_WUC); + regs_buff[43] = E1000_READ_REG(hw, E1000_WUFC); + regs_buff[44] = E1000_READ_REG(hw, E1000_WUS); + regs_buff[45] = E1000_READ_REG(hw, E1000_IPAV); + regs_buff[46] = E1000_READ_REG(hw, E1000_WUPL); + + /* MAC */ + regs_buff[47] = E1000_READ_REG(hw, E1000_PCS_CFG0); + regs_buff[48] = E1000_READ_REG(hw, E1000_PCS_LCTL); + regs_buff[49] = E1000_READ_REG(hw, E1000_PCS_LSTAT); + regs_buff[50] = E1000_READ_REG(hw, E1000_PCS_ANADV); + regs_buff[51] = E1000_READ_REG(hw, E1000_PCS_LPAB); + regs_buff[52] = E1000_READ_REG(hw, E1000_PCS_NPTX); + regs_buff[53] = E1000_READ_REG(hw, E1000_PCS_LPABNP); + + /* Statistics */ + regs_buff[54] = adapter->stats.crcerrs; + regs_buff[55] = adapter->stats.algnerrc; + regs_buff[56] = adapter->stats.symerrs; + regs_buff[57] = adapter->stats.rxerrc; + regs_buff[58] = adapter->stats.mpc; + regs_buff[59] = adapter->stats.scc; + regs_buff[60] = adapter->stats.ecol; + regs_buff[61] = adapter->stats.mcc; + regs_buff[62] = adapter->stats.latecol; + regs_buff[63] = adapter->stats.colc; + regs_buff[64] = adapter->stats.dc; + regs_buff[65] = adapter->stats.tncrs; + regs_buff[66] = adapter->stats.sec; + regs_buff[67] = adapter->stats.htdpmc; + regs_buff[68] = adapter->stats.rlec; + regs_buff[69] = adapter->stats.xonrxc; + regs_buff[70] = adapter->stats.xontxc; + regs_buff[71] = adapter->stats.xoffrxc; + regs_buff[72] = adapter->stats.xofftxc; + regs_buff[73] = adapter->stats.fcruc; + regs_buff[74] = adapter->stats.prc64; + regs_buff[75] = adapter->stats.prc127; + regs_buff[76] = adapter->stats.prc255; + regs_buff[77] = adapter->stats.prc511; + regs_buff[78] = adapter->stats.prc1023; + regs_buff[79] = adapter->stats.prc1522; + regs_buff[80] = adapter->stats.gprc; + regs_buff[81] = adapter->stats.bprc; + regs_buff[82] = adapter->stats.mprc; + regs_buff[83] = adapter->stats.gptc; + regs_buff[84] = adapter->stats.gorc; + regs_buff[86] = adapter->stats.gotc; + regs_buff[88] = adapter->stats.rnbc; + regs_buff[89] = adapter->stats.ruc; + regs_buff[90] = adapter->stats.rfc; + regs_buff[91] = adapter->stats.roc; + regs_buff[92] = adapter->stats.rjc; + regs_buff[93] = adapter->stats.mgprc; + regs_buff[94] = adapter->stats.mgpdc; + regs_buff[95] = adapter->stats.mgptc; + regs_buff[96] = adapter->stats.tor; + regs_buff[98] = adapter->stats.tot; + regs_buff[100] = adapter->stats.tpr; + regs_buff[101] = adapter->stats.tpt; + regs_buff[102] = adapter->stats.ptc64; + regs_buff[103] = adapter->stats.ptc127; + regs_buff[104] = adapter->stats.ptc255; + regs_buff[105] = adapter->stats.ptc511; + regs_buff[106] = adapter->stats.ptc1023; + regs_buff[107] = adapter->stats.ptc1522; + regs_buff[108] = adapter->stats.mptc; + regs_buff[109] = adapter->stats.bptc; + regs_buff[110] = adapter->stats.tsctc; + regs_buff[111] = adapter->stats.iac; + regs_buff[112] = adapter->stats.rpthc; + regs_buff[113] = adapter->stats.hgptc; + regs_buff[114] = adapter->stats.hgorc; + regs_buff[116] = adapter->stats.hgotc; + regs_buff[118] = adapter->stats.lenerrs; + regs_buff[119] = adapter->stats.scvpc; + regs_buff[120] = adapter->stats.hrmpc; + + for (i = 0; i < 4; i++) + regs_buff[121 + i] = E1000_READ_REG(hw, E1000_SRRCTL(i)); + for (i = 0; i < 4; i++) + regs_buff[125 + i] = E1000_READ_REG(hw, E1000_PSRTYPE(i)); + for (i = 0; i < 4; i++) + regs_buff[129 + i] = E1000_READ_REG(hw, E1000_RDBAL(i)); + for (i = 0; i < 4; i++) + regs_buff[133 + i] = E1000_READ_REG(hw, E1000_RDBAH(i)); + for (i = 0; i < 4; i++) + regs_buff[137 + i] = E1000_READ_REG(hw, E1000_RDLEN(i)); + for (i = 0; i < 4; i++) + regs_buff[141 + i] = E1000_READ_REG(hw, E1000_RDH(i)); + for (i = 0; i < 4; i++) + regs_buff[145 + i] = E1000_READ_REG(hw, E1000_RDT(i)); + for (i = 0; i < 4; i++) + regs_buff[149 + i] = E1000_READ_REG(hw, E1000_RXDCTL(i)); + + for (i = 0; i < 10; i++) + regs_buff[153 + i] = E1000_READ_REG(hw, E1000_EITR(i)); + for (i = 0; i < 8; i++) + regs_buff[163 + i] = E1000_READ_REG(hw, E1000_IMIR(i)); + for (i = 0; i < 8; i++) + regs_buff[171 + i] = E1000_READ_REG(hw, E1000_IMIREXT(i)); + for (i = 0; i < 16; i++) + regs_buff[179 + i] = E1000_READ_REG(hw, E1000_RAL(i)); + for (i = 0; i < 16; i++) + regs_buff[195 + i] = E1000_READ_REG(hw, E1000_RAH(i)); + + for (i = 0; i < 4; i++) + regs_buff[211 + i] = E1000_READ_REG(hw, E1000_TDBAL(i)); + for (i = 0; i < 4; i++) + regs_buff[215 + i] = E1000_READ_REG(hw, E1000_TDBAH(i)); + for (i = 0; i < 4; i++) + regs_buff[219 + i] = E1000_READ_REG(hw, E1000_TDLEN(i)); + for (i = 0; i < 4; i++) + regs_buff[223 + i] = E1000_READ_REG(hw, E1000_TDH(i)); + for (i = 0; i < 4; i++) + regs_buff[227 + i] = E1000_READ_REG(hw, E1000_TDT(i)); + for (i = 0; i < 4; i++) + regs_buff[231 + i] = E1000_READ_REG(hw, E1000_TXDCTL(i)); + for (i = 0; i < 4; i++) + regs_buff[235 + i] = E1000_READ_REG(hw, E1000_TDWBAL(i)); + for (i = 0; i < 4; i++) + regs_buff[239 + i] = E1000_READ_REG(hw, E1000_TDWBAH(i)); + for (i = 0; i < 4; i++) + regs_buff[243 + i] = E1000_READ_REG(hw, E1000_DCA_TXCTRL(i)); + + for (i = 0; i < 4; i++) + regs_buff[247 + i] = E1000_READ_REG(hw, E1000_IP4AT_REG(i)); + for (i = 0; i < 4; i++) + regs_buff[251 + i] = E1000_READ_REG(hw, E1000_IP6AT_REG(i)); + for (i = 0; i < 32; i++) + regs_buff[255 + i] = E1000_READ_REG(hw, E1000_WUPM_REG(i)); + for (i = 0; i < 128; i++) + regs_buff[287 + i] = E1000_READ_REG(hw, E1000_FFMT_REG(i)); + for (i = 0; i < 128; i++) + regs_buff[415 + i] = E1000_READ_REG(hw, E1000_FFVT_REG(i)); + for (i = 0; i < 4; i++) + regs_buff[543 + i] = E1000_READ_REG(hw, E1000_FFLT_REG(i)); + + regs_buff[547] = E1000_READ_REG(hw, E1000_TDFH); + regs_buff[548] = E1000_READ_REG(hw, E1000_TDFT); + regs_buff[549] = E1000_READ_REG(hw, E1000_TDFHS); + regs_buff[550] = E1000_READ_REG(hw, E1000_TDFPC); + if (hw->mac.type > e1000_82580) { + regs_buff[551] = adapter->stats.o2bgptc; + regs_buff[552] = adapter->stats.b2ospc; + regs_buff[553] = adapter->stats.o2bspc; + regs_buff[554] = adapter->stats.b2ogprc; + } +} + +static int igb_get_eeprom_len(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + return adapter->hw.nvm.word_size * 2; +} + +static int igb_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 *eeprom_buff; + int first_word, last_word; + int ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EINVAL; + + eeprom->magic = hw->vendor_id | (hw->device_id << 16); + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + + eeprom_buff = kmalloc(sizeof(u16) * + (last_word - first_word + 1), GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + if (hw->nvm.type == e1000_nvm_eeprom_spi) + ret_val = e1000_read_nvm(hw, first_word, + last_word - first_word + 1, + eeprom_buff); + else { + for (i = 0; i < last_word - first_word + 1; i++) { + ret_val = e1000_read_nvm(hw, first_word + i, 1, + &eeprom_buff[i]); + if (ret_val) + break; + } + } + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + eeprom_buff[i] = le16_to_cpu(eeprom_buff[i]); + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), + eeprom->len); + kfree(eeprom_buff); + + return ret_val; +} + +static int igb_set_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 *eeprom_buff; + void *ptr; + int max_len, first_word, last_word, ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EOPNOTSUPP; + + if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) + return -EFAULT; + + max_len = hw->nvm.word_size * 2; + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + eeprom_buff = kmalloc(max_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + ptr = (void *)eeprom_buff; + + if (eeprom->offset & 1) { + /* need read/modify/write of first changed EEPROM word */ + /* only the second byte of the word is being modified */ + ret_val = e1000_read_nvm(hw, first_word, 1, + &eeprom_buff[0]); + ptr++; + } + if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { + /* need read/modify/write of last changed EEPROM word */ + /* only the first byte of the word is being modified */ + ret_val = e1000_read_nvm(hw, last_word, 1, + &eeprom_buff[last_word - first_word]); + } + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(ptr, bytes, eeprom->len); + + for (i = 0; i < last_word - first_word + 1; i++) + cpu_to_le16s(&eeprom_buff[i]); + + ret_val = e1000_write_nvm(hw, first_word, + last_word - first_word + 1, eeprom_buff); + + /* Update the checksum if write succeeded. + * and flush shadow RAM for 82573 controllers */ + if (ret_val == 0) + e1000_update_nvm_checksum(hw); + + kfree(eeprom_buff); + return ret_val; +} + +static void igb_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + strncpy(drvinfo->driver, igb_driver_name, sizeof(drvinfo->driver) - 1); + strncpy(drvinfo->version, igb_driver_version, sizeof(drvinfo->version) - 1); + + strlcpy(drvinfo->fw_version, adapter->fw_version, + sizeof(drvinfo->fw_version)); + strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info)); + drvinfo->n_stats = IGB_STATS_LEN; + drvinfo->testinfo_len = IGB_TEST_LEN; + drvinfo->regdump_len = igb_get_regs_len(netdev); + drvinfo->eedump_len = igb_get_eeprom_len(netdev); +} + +static void igb_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + ring->rx_max_pending = IGB_MAX_RXD; + ring->tx_max_pending = IGB_MAX_TXD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = adapter->rx_ring_count; + ring->tx_pending = adapter->tx_ring_count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} + +static int igb_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct igb_ring *temp_ring; + int i, err = 0; + u16 new_rx_count, new_tx_count; + + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + return -EINVAL; + + new_rx_count = min(ring->rx_pending, (u32)IGB_MAX_RXD); + new_rx_count = max(new_rx_count, (u16)IGB_MIN_RXD); + new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE); + + new_tx_count = min(ring->tx_pending, (u32)IGB_MAX_TXD); + new_tx_count = max(new_tx_count, (u16)IGB_MIN_TXD); + new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE); + + if ((new_tx_count == adapter->tx_ring_count) && + (new_rx_count == adapter->rx_ring_count)) { + /* nothing to do */ + return 0; + } + + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + + if (!netif_running(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i]->count = new_tx_count; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i]->count = new_rx_count; + adapter->tx_ring_count = new_tx_count; + adapter->rx_ring_count = new_rx_count; + goto clear_reset; + } + + if (adapter->num_tx_queues > adapter->num_rx_queues) + temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring)); + else + temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring)); + + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } + + igb_down(adapter); + + /* + * We can't just free everything and then setup again, + * because the ISRs in MSI-X mode get passed pointers + * to the tx and rx ring structs. + */ + if (new_tx_count != adapter->tx_ring_count) { + for (i = 0; i < adapter->num_tx_queues; i++) { + memcpy(&temp_ring[i], adapter->tx_ring[i], + sizeof(struct igb_ring)); + + temp_ring[i].count = new_tx_count; + err = igb_setup_tx_resources(&temp_ring[i]); + if (err) { + while (i) { + i--; + igb_free_tx_resources(&temp_ring[i]); + } + goto err_setup; + } + } + + for (i = 0; i < adapter->num_tx_queues; i++) { + igb_free_tx_resources(adapter->tx_ring[i]); + + memcpy(adapter->tx_ring[i], &temp_ring[i], + sizeof(struct igb_ring)); + } + + adapter->tx_ring_count = new_tx_count; + } + + if (new_rx_count != adapter->rx_ring_count) { + for (i = 0; i < adapter->num_rx_queues; i++) { + memcpy(&temp_ring[i], adapter->rx_ring[i], + sizeof(struct igb_ring)); + + temp_ring[i].count = new_rx_count; + err = igb_setup_rx_resources(&temp_ring[i]); + if (err) { + while (i) { + i--; + igb_free_rx_resources(&temp_ring[i]); + } + goto err_setup; + } + + } + + for (i = 0; i < adapter->num_rx_queues; i++) { + igb_free_rx_resources(adapter->rx_ring[i]); + + memcpy(adapter->rx_ring[i], &temp_ring[i], + sizeof(struct igb_ring)); + } + + adapter->rx_ring_count = new_rx_count; + } +err_setup: + igb_up(adapter); + vfree(temp_ring); +clear_reset: + clear_bit(__IGB_RESETTING, &adapter->state); + return err; +} +static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data, + int reg, u32 mask, u32 write) +{ + struct e1000_hw *hw = &adapter->hw; + u32 pat, val; + static const u32 _test[] = + {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; + for (pat = 0; pat < ARRAY_SIZE(_test); pat++) { + E1000_WRITE_REG(hw, reg, (_test[pat] & write)); + val = E1000_READ_REG(hw, reg) & mask; + if (val != (_test[pat] & write & mask)) { + dev_err(pci_dev_to_dev(adapter->pdev), "pattern test reg %04X " + "failed: got 0x%08X expected 0x%08X\n", + E1000_REGISTER(hw, reg), val, (_test[pat] & write & mask)); + *data = E1000_REGISTER(hw, reg); + return 1; + } + } + + return 0; +} + +static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data, + int reg, u32 mask, u32 write) +{ + struct e1000_hw *hw = &adapter->hw; + u32 val; + E1000_WRITE_REG(hw, reg, write & mask); + val = E1000_READ_REG(hw, reg); + if ((write & mask) != (val & mask)) { + dev_err(pci_dev_to_dev(adapter->pdev), "set/check reg %04X test failed:" + " got 0x%08X expected 0x%08X\n", reg, + (val & mask), (write & mask)); + *data = E1000_REGISTER(hw, reg); + return 1; + } + + return 0; +} + +#define REG_PATTERN_TEST(reg, mask, write) \ + do { \ + if (reg_pattern_test(adapter, data, reg, mask, write)) \ + return 1; \ + } while (0) + +#define REG_SET_AND_CHECK(reg, mask, write) \ + do { \ + if (reg_set_and_check(adapter, data, reg, mask, write)) \ + return 1; \ + } while (0) + +static int igb_reg_test(struct igb_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + struct igb_reg_test *test; + u32 value, before, after; + u32 i, toggle; + + switch (adapter->hw.mac.type) { + case e1000_i350: + case e1000_i354: + test = reg_test_i350; + toggle = 0x7FEFF3FF; + break; + case e1000_i210: + case e1000_i211: + test = reg_test_i210; + toggle = 0x7FEFF3FF; + break; + case e1000_82580: + test = reg_test_82580; + toggle = 0x7FEFF3FF; + break; + case e1000_82576: + test = reg_test_82576; + toggle = 0x7FFFF3FF; + break; + default: + test = reg_test_82575; + toggle = 0x7FFFF3FF; + break; + } + + /* Because the status register is such a special case, + * we handle it separately from the rest of the register + * tests. Some bits are read-only, some toggle, and some + * are writable on newer MACs. + */ + before = E1000_READ_REG(hw, E1000_STATUS); + value = (E1000_READ_REG(hw, E1000_STATUS) & toggle); + E1000_WRITE_REG(hw, E1000_STATUS, toggle); + after = E1000_READ_REG(hw, E1000_STATUS) & toggle; + if (value != after) { + dev_err(pci_dev_to_dev(adapter->pdev), "failed STATUS register test " + "got: 0x%08X expected: 0x%08X\n", after, value); + *data = 1; + return 1; + } + /* restore previous status */ + E1000_WRITE_REG(hw, E1000_STATUS, before); + + /* Perform the remainder of the register test, looping through + * the test table until we either fail or reach the null entry. + */ + while (test->reg) { + for (i = 0; i < test->array_len; i++) { + switch (test->test_type) { + case PATTERN_TEST: + REG_PATTERN_TEST(test->reg + + (i * test->reg_offset), + test->mask, + test->write); + break; + case SET_READ_TEST: + REG_SET_AND_CHECK(test->reg + + (i * test->reg_offset), + test->mask, + test->write); + break; + case WRITE_NO_TEST: + writel(test->write, + (adapter->hw.hw_addr + test->reg) + + (i * test->reg_offset)); + break; + case TABLE32_TEST: + REG_PATTERN_TEST(test->reg + (i * 4), + test->mask, + test->write); + break; + case TABLE64_TEST_LO: + REG_PATTERN_TEST(test->reg + (i * 8), + test->mask, + test->write); + break; + case TABLE64_TEST_HI: + REG_PATTERN_TEST((test->reg + 4) + (i * 8), + test->mask, + test->write); + break; + } + } + test++; + } + + *data = 0; + return 0; +} + +static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data) +{ + *data = 0; + + /* Validate NVM checksum */ + if (e1000_validate_nvm_checksum(&adapter->hw) < 0) + *data = 2; + + return *data; +} + +static irqreturn_t igb_test_intr(int irq, void *data) +{ + struct igb_adapter *adapter = data; + struct e1000_hw *hw = &adapter->hw; + + adapter->test_icr |= E1000_READ_REG(hw, E1000_ICR); + + return IRQ_HANDLED; +} + +static int igb_intr_test(struct igb_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 mask, ics_mask, i = 0, shared_int = TRUE; + u32 irq = adapter->pdev->irq; + + *data = 0; + + /* Hook up test interrupt handler just for this test */ + if (adapter->msix_entries) { + if (request_irq(adapter->msix_entries[0].vector, + &igb_test_intr, 0, netdev->name, adapter)) { + *data = 1; + return -1; + } + } else if (adapter->flags & IGB_FLAG_HAS_MSI) { + shared_int = FALSE; + if (request_irq(irq, + igb_test_intr, 0, netdev->name, adapter)) { + *data = 1; + return -1; + } + } else if (!request_irq(irq, igb_test_intr, IRQF_PROBE_SHARED, + netdev->name, adapter)) { + shared_int = FALSE; + } else if (request_irq(irq, &igb_test_intr, IRQF_SHARED, + netdev->name, adapter)) { + *data = 1; + return -1; + } + dev_info(pci_dev_to_dev(adapter->pdev), "testing %s interrupt\n", + (shared_int ? "shared" : "unshared")); + + /* Disable all the interrupts */ + E1000_WRITE_REG(hw, E1000_IMC, ~0); + E1000_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + /* Define all writable bits for ICS */ + switch (hw->mac.type) { + case e1000_82575: + ics_mask = 0x37F47EDD; + break; + case e1000_82576: + ics_mask = 0x77D4FBFD; + break; + case e1000_82580: + ics_mask = 0x77DCFED5; + break; + case e1000_i350: + case e1000_i354: + ics_mask = 0x77DCFED5; + break; + case e1000_i210: + case e1000_i211: + ics_mask = 0x774CFED5; + break; + default: + ics_mask = 0x7FFFFFFF; + break; + } + + /* Test each interrupt */ + for (; i < 31; i++) { + /* Interrupt to test */ + mask = 1 << i; + + if (!(mask & ics_mask)) + continue; + + if (!shared_int) { + /* Disable the interrupt to be reported in + * the cause register and then force the same + * interrupt and see if one gets posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + + /* Flush any pending interrupts */ + E1000_WRITE_REG(hw, E1000_ICR, ~0); + + E1000_WRITE_REG(hw, E1000_IMC, mask); + E1000_WRITE_REG(hw, E1000_ICS, mask); + E1000_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + if (adapter->test_icr & mask) { + *data = 3; + break; + } + } + + /* Enable the interrupt to be reported in + * the cause register and then force the same + * interrupt and see if one gets posted. If + * an interrupt was not posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + + /* Flush any pending interrupts */ + E1000_WRITE_REG(hw, E1000_ICR, ~0); + + E1000_WRITE_REG(hw, E1000_IMS, mask); + E1000_WRITE_REG(hw, E1000_ICS, mask); + E1000_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + if (!(adapter->test_icr & mask)) { + *data = 4; + break; + } + + if (!shared_int) { + /* Disable the other interrupts to be reported in + * the cause register and then force the other + * interrupts and see if any get posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + + /* Flush any pending interrupts */ + E1000_WRITE_REG(hw, E1000_ICR, ~0); + + E1000_WRITE_REG(hw, E1000_IMC, ~mask); + E1000_WRITE_REG(hw, E1000_ICS, ~mask); + E1000_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + if (adapter->test_icr & mask) { + *data = 5; + break; + } + } + } + + /* Disable all the interrupts */ + E1000_WRITE_REG(hw, E1000_IMC, ~0); + E1000_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + /* Unhook test interrupt handler */ + if (adapter->msix_entries) + free_irq(adapter->msix_entries[0].vector, adapter); + else + free_irq(irq, adapter); + + return *data; +} + +static void igb_free_desc_rings(struct igb_adapter *adapter) +{ + igb_free_tx_resources(&adapter->test_tx_ring); + igb_free_rx_resources(&adapter->test_rx_ring); +} + +static int igb_setup_desc_rings(struct igb_adapter *adapter) +{ + struct igb_ring *tx_ring = &adapter->test_tx_ring; + struct igb_ring *rx_ring = &adapter->test_rx_ring; + struct e1000_hw *hw = &adapter->hw; + int ret_val; + + /* Setup Tx descriptor ring and Tx buffers */ + tx_ring->count = IGB_DEFAULT_TXD; + tx_ring->dev = pci_dev_to_dev(adapter->pdev); + tx_ring->netdev = adapter->netdev; + tx_ring->reg_idx = adapter->vfs_allocated_count; + + if (igb_setup_tx_resources(tx_ring)) { + ret_val = 1; + goto err_nomem; + } + + igb_setup_tctl(adapter); + igb_configure_tx_ring(adapter, tx_ring); + + /* Setup Rx descriptor ring and Rx buffers */ + rx_ring->count = IGB_DEFAULT_RXD; + rx_ring->dev = pci_dev_to_dev(adapter->pdev); + rx_ring->netdev = adapter->netdev; +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + rx_ring->rx_buffer_len = IGB_RX_HDR_LEN; +#endif + rx_ring->reg_idx = adapter->vfs_allocated_count; + + if (igb_setup_rx_resources(rx_ring)) { + ret_val = 2; + goto err_nomem; + } + + /* set the default queue to queue 0 of PF */ + E1000_WRITE_REG(hw, E1000_MRQC, adapter->vfs_allocated_count << 3); + + /* enable receive ring */ + igb_setup_rctl(adapter); + igb_configure_rx_ring(adapter, rx_ring); + + igb_alloc_rx_buffers(rx_ring, igb_desc_unused(rx_ring)); + + return 0; + +err_nomem: + igb_free_desc_rings(adapter); + return ret_val; +} + +static void igb_phy_disable_receiver(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + /* Write out to PHY registers 29 and 30 to disable the Receiver. */ + e1000_write_phy_reg(hw, 29, 0x001F); + e1000_write_phy_reg(hw, 30, 0x8FFC); + e1000_write_phy_reg(hw, 29, 0x001A); + e1000_write_phy_reg(hw, 30, 0x8FF0); +} + +static int igb_integrated_phy_loopback(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_reg = 0; + + hw->mac.autoneg = FALSE; + + if (hw->phy.type == e1000_phy_m88) { + if (hw->phy.id != I210_I_PHY_ID) { + /* Auto-MDI/MDIX Off */ + e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); + /* reset to update Auto-MDI/MDIX */ + e1000_write_phy_reg(hw, PHY_CONTROL, 0x9140); + /* autoneg off */ + e1000_write_phy_reg(hw, PHY_CONTROL, 0x8140); + } else { + /* force 1000, set loopback */ + e1000_write_phy_reg(hw, I347AT4_PAGE_SELECT, 0); + e1000_write_phy_reg(hw, PHY_CONTROL, 0x4140); + } + } else { + /* enable MII loopback */ + if (hw->phy.type == e1000_phy_82580) + e1000_write_phy_reg(hw, I82577_PHY_LBK_CTRL, 0x8041); + } + + /* force 1000, set loopback */ + e1000_write_phy_reg(hw, PHY_CONTROL, 0x4140); + + /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg = E1000_READ_REG(hw, E1000_CTRL); + ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ + ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ + E1000_CTRL_FD | /* Force Duplex to FULL */ + E1000_CTRL_SLU); /* Set link up enable bit */ + + if (hw->phy.type == e1000_phy_m88) + ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ + + E1000_WRITE_REG(hw, E1000_CTRL, ctrl_reg); + + /* Disable the receiver on the PHY so when a cable is plugged in, the + * PHY does not begin to autoneg when a cable is reconnected to the NIC. + */ + if (hw->phy.type == e1000_phy_m88) + igb_phy_disable_receiver(adapter); + + mdelay(500); + return 0; +} + +static int igb_set_phy_loopback(struct igb_adapter *adapter) +{ + return igb_integrated_phy_loopback(adapter); +} + +static int igb_setup_loopback_test(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 reg; + + reg = E1000_READ_REG(hw, E1000_CTRL_EXT); + + /* use CTRL_EXT to identify link type as SGMII can appear as copper */ + if (reg & E1000_CTRL_EXT_LINK_MODE_MASK) { + if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) || + (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) || + (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) || + (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) { + + /* Enable DH89xxCC MPHY for near end loopback */ + reg = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTL); + reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) | + E1000_MPHY_PCS_CLK_REG_OFFSET; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTL, reg); + + reg = E1000_READ_REG(hw, E1000_MPHY_DATA); + reg |= E1000_MPHY_PCS_CLK_REG_DIGINELBEN; + E1000_WRITE_REG(hw, E1000_MPHY_DATA, reg); + } + + reg = E1000_READ_REG(hw, E1000_RCTL); + reg |= E1000_RCTL_LBM_TCVR; + E1000_WRITE_REG(hw, E1000_RCTL, reg); + + E1000_WRITE_REG(hw, E1000_SCTL, E1000_ENABLE_SERDES_LOOPBACK); + + reg = E1000_READ_REG(hw, E1000_CTRL); + reg &= ~(E1000_CTRL_RFCE | + E1000_CTRL_TFCE | + E1000_CTRL_LRST); + reg |= E1000_CTRL_SLU | + E1000_CTRL_FD; + E1000_WRITE_REG(hw, E1000_CTRL, reg); + + /* Unset switch control to serdes energy detect */ + reg = E1000_READ_REG(hw, E1000_CONNSW); + reg &= ~E1000_CONNSW_ENRGSRC; + E1000_WRITE_REG(hw, E1000_CONNSW, reg); + + /* Unset sigdetect for SERDES loopback on + * 82580 and newer devices + */ + if (hw->mac.type >= e1000_82580) { + reg = E1000_READ_REG(hw, E1000_PCS_CFG0); + reg |= E1000_PCS_CFG_IGN_SD; + E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); + } + + /* Set PCS register for forced speed */ + reg = E1000_READ_REG(hw, E1000_PCS_LCTL); + reg &= ~E1000_PCS_LCTL_AN_ENABLE; /* Disable Autoneg*/ + reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */ + E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ + E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ + E1000_PCS_LCTL_FSD | /* Force Speed */ + E1000_PCS_LCTL_FORCE_LINK; /* Force Link */ + E1000_WRITE_REG(hw, E1000_PCS_LCTL, reg); + + return 0; + } + + return igb_set_phy_loopback(adapter); +} + +static void igb_loopback_cleanup(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl; + u16 phy_reg; + + if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) || + (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) || + (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) || + (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) { + u32 reg; + + /* Disable near end loopback on DH89xxCC */ + reg = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTL); + reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK ) | + E1000_MPHY_PCS_CLK_REG_OFFSET; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTL, reg); + + reg = E1000_READ_REG(hw, E1000_MPHY_DATA); + reg &= ~E1000_MPHY_PCS_CLK_REG_DIGINELBEN; + E1000_WRITE_REG(hw, E1000_MPHY_DATA, reg); + } + + rctl = E1000_READ_REG(hw, E1000_RCTL); + rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + + hw->mac.autoneg = TRUE; + e1000_read_phy_reg(hw, PHY_CONTROL, &phy_reg); + if (phy_reg & MII_CR_LOOPBACK) { + phy_reg &= ~MII_CR_LOOPBACK; + if (hw->phy.type == I210_I_PHY_ID) + e1000_write_phy_reg(hw, I347AT4_PAGE_SELECT, 0); + e1000_write_phy_reg(hw, PHY_CONTROL, phy_reg); + e1000_phy_commit(hw); + } +} +static void igb_create_lbtest_frame(struct sk_buff *skb, + unsigned int frame_size) +{ + memset(skb->data, 0xFF, frame_size); + frame_size /= 2; + memset(&skb->data[frame_size], 0xAA, frame_size - 1); + memset(&skb->data[frame_size + 10], 0xBE, 1); + memset(&skb->data[frame_size + 12], 0xAF, 1); +} + +static int igb_check_lbtest_frame(struct igb_rx_buffer *rx_buffer, + unsigned int frame_size) +{ + unsigned char *data; + bool match = true; + + frame_size >>= 1; + +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + data = rx_buffer->skb->data; +#else + data = kmap(rx_buffer->page); +#endif + + if (data[3] != 0xFF || + data[frame_size + 10] != 0xBE || + data[frame_size + 12] != 0xAF) + match = false; + +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + kunmap(rx_buffer->page); + +#endif + return match; +} + +static u16 igb_clean_test_rings(struct igb_ring *rx_ring, + struct igb_ring *tx_ring, + unsigned int size) +{ + union e1000_adv_rx_desc *rx_desc; + struct igb_rx_buffer *rx_buffer_info; + struct igb_tx_buffer *tx_buffer_info; + u16 rx_ntc, tx_ntc, count = 0; + + /* initialize next to clean and descriptor values */ + rx_ntc = rx_ring->next_to_clean; + tx_ntc = tx_ring->next_to_clean; + rx_desc = IGB_RX_DESC(rx_ring, rx_ntc); + + while (igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) { + /* check rx buffer */ + rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc]; + + /* sync Rx buffer for CPU read */ + dma_sync_single_for_cpu(rx_ring->dev, + rx_buffer_info->dma, +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + IGB_RX_HDR_LEN, +#else + IGB_RX_BUFSZ, +#endif + DMA_FROM_DEVICE); + + /* verify contents of skb */ + if (igb_check_lbtest_frame(rx_buffer_info, size)) + count++; + + /* sync Rx buffer for device write */ + dma_sync_single_for_device(rx_ring->dev, + rx_buffer_info->dma, +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + IGB_RX_HDR_LEN, +#else + IGB_RX_BUFSZ, +#endif + DMA_FROM_DEVICE); + + /* unmap buffer on tx side */ + tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc]; + igb_unmap_and_free_tx_resource(tx_ring, tx_buffer_info); + + /* increment rx/tx next to clean counters */ + rx_ntc++; + if (rx_ntc == rx_ring->count) + rx_ntc = 0; + tx_ntc++; + if (tx_ntc == tx_ring->count) + tx_ntc = 0; + + /* fetch next descriptor */ + rx_desc = IGB_RX_DESC(rx_ring, rx_ntc); + } + + /* re-map buffers to ring, store next to clean values */ + igb_alloc_rx_buffers(rx_ring, count); + rx_ring->next_to_clean = rx_ntc; + tx_ring->next_to_clean = tx_ntc; + + return count; +} + +static int igb_run_loopback_test(struct igb_adapter *adapter) +{ + struct igb_ring *tx_ring = &adapter->test_tx_ring; + struct igb_ring *rx_ring = &adapter->test_rx_ring; + u16 i, j, lc, good_cnt; + int ret_val = 0; + unsigned int size = IGB_RX_HDR_LEN; + netdev_tx_t tx_ret_val; + struct sk_buff *skb; + + /* allocate test skb */ + skb = alloc_skb(size, GFP_KERNEL); + if (!skb) + return 11; + + /* place data into test skb */ + igb_create_lbtest_frame(skb, size); + skb_put(skb, size); + + /* + * Calculate the loop count based on the largest descriptor ring + * The idea is to wrap the largest ring a number of times using 64 + * send/receive pairs during each loop + */ + + if (rx_ring->count <= tx_ring->count) + lc = ((tx_ring->count / 64) * 2) + 1; + else + lc = ((rx_ring->count / 64) * 2) + 1; + + for (j = 0; j <= lc; j++) { /* loop count loop */ + /* reset count of good packets */ + good_cnt = 0; + + /* place 64 packets on the transmit queue*/ + for (i = 0; i < 64; i++) { + skb_get(skb); + tx_ret_val = igb_xmit_frame_ring(skb, tx_ring); + if (tx_ret_val == NETDEV_TX_OK) + good_cnt++; + } + + if (good_cnt != 64) { + ret_val = 12; + break; + } + + /* allow 200 milliseconds for packets to go from tx to rx */ + msleep(200); + + good_cnt = igb_clean_test_rings(rx_ring, tx_ring, size); + if (good_cnt != 64) { + ret_val = 13; + break; + } + } /* end loop count loop */ + + /* free the original skb */ + kfree_skb(skb); + + return ret_val; +} + +static int igb_loopback_test(struct igb_adapter *adapter, u64 *data) +{ + /* PHY loopback cannot be performed if SoL/IDER + * sessions are active */ + if (e1000_check_reset_block(&adapter->hw)) { + dev_err(pci_dev_to_dev(adapter->pdev), + "Cannot do PHY loopback test " + "when SoL/IDER is active.\n"); + *data = 0; + goto out; + } + if (adapter->hw.mac.type == e1000_i354) { + dev_info(&adapter->pdev->dev, + "Loopback test not supported on i354.\n"); + *data = 0; + goto out; + } + *data = igb_setup_desc_rings(adapter); + if (*data) + goto out; + *data = igb_setup_loopback_test(adapter); + if (*data) + goto err_loopback; + *data = igb_run_loopback_test(adapter); + + igb_loopback_cleanup(adapter); + +err_loopback: + igb_free_desc_rings(adapter); +out: + return *data; +} + +static int igb_link_test(struct igb_adapter *adapter, u64 *data) +{ + u32 link; + int i, time; + + *data = 0; + time = 0; + if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) { + int i = 0; + adapter->hw.mac.serdes_has_link = FALSE; + + /* On some blade server designs, link establishment + * could take as long as 2-3 minutes */ + do { + e1000_check_for_link(&adapter->hw); + if (adapter->hw.mac.serdes_has_link) + goto out; + msleep(20); + } while (i++ < 3750); + + *data = 1; + } else { + for (i=0; i < IGB_MAX_LINK_TRIES; i++) { + link = igb_has_link(adapter); + if (link) + goto out; + else { + time++; + msleep(1000); + } + } + if (!link) + *data = 1; + } + out: + return *data; +} + +static void igb_diag_test(struct net_device *netdev, + struct ethtool_test *eth_test, u64 *data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + u16 autoneg_advertised; + u8 forced_speed_duplex, autoneg; + bool if_running = netif_running(netdev); + + set_bit(__IGB_TESTING, &adapter->state); + if (eth_test->flags == ETH_TEST_FL_OFFLINE) { + /* Offline tests */ + + /* save speed, duplex, autoneg settings */ + autoneg_advertised = adapter->hw.phy.autoneg_advertised; + forced_speed_duplex = adapter->hw.mac.forced_speed_duplex; + autoneg = adapter->hw.mac.autoneg; + + dev_info(pci_dev_to_dev(adapter->pdev), "offline testing starting\n"); + + /* power up link for link test */ + igb_power_up_link(adapter); + + /* Link test performed before hardware reset so autoneg doesn't + * interfere with test result */ + if (igb_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + if (if_running) + /* indicate we're in test mode */ + dev_close(netdev); + else + igb_reset(adapter); + + if (igb_reg_test(adapter, &data[0])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + igb_reset(adapter); + if (igb_eeprom_test(adapter, &data[1])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + igb_reset(adapter); + if (igb_intr_test(adapter, &data[2])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + igb_reset(adapter); + + /* power up link for loopback test */ + igb_power_up_link(adapter); + + if (igb_loopback_test(adapter, &data[3])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* restore speed, duplex, autoneg settings */ + adapter->hw.phy.autoneg_advertised = autoneg_advertised; + adapter->hw.mac.forced_speed_duplex = forced_speed_duplex; + adapter->hw.mac.autoneg = autoneg; + + /* force this routine to wait until autoneg complete/timeout */ + adapter->hw.phy.autoneg_wait_to_complete = TRUE; + igb_reset(adapter); + adapter->hw.phy.autoneg_wait_to_complete = FALSE; + + clear_bit(__IGB_TESTING, &adapter->state); + if (if_running) + dev_open(netdev); + } else { + dev_info(pci_dev_to_dev(adapter->pdev), "online testing starting\n"); + + /* PHY is powered down when interface is down */ + if (if_running && igb_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + else + data[4] = 0; + + /* Online tests aren't run; pass by default */ + data[0] = 0; + data[1] = 0; + data[2] = 0; + data[3] = 0; + + clear_bit(__IGB_TESTING, &adapter->state); + } + msleep_interruptible(4 * 1000); +} + +static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_MCAST | + WAKE_BCAST | WAKE_MAGIC | + WAKE_PHY; + wol->wolopts = 0; + + if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED)) + return; + + /* apply any specific unsupported masks here */ + switch (adapter->hw.device_id) { + default: + break; + } + + if (adapter->wol & E1000_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & E1000_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & E1000_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & E1000_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; + if (adapter->wol & E1000_WUFC_LNKC) + wol->wolopts |= WAKE_PHY; +} + +static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + + if (!(adapter->flags & IGB_FLAG_WOL_SUPPORTED)) + return wol->wolopts ? -EOPNOTSUPP : 0; + + /* these settings will always override what we currently have */ + adapter->wol = 0; + + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= E1000_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= E1000_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= E1000_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= E1000_WUFC_MAG; + if (wol->wolopts & WAKE_PHY) + adapter->wol |= E1000_WUFC_LNKC; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + return 0; +} + +/* bit defines for adapter->led_status */ +#ifdef HAVE_ETHTOOL_SET_PHYS_ID +static int igb_set_phys_id(struct net_device *netdev, + enum ethtool_phys_id_state state) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + switch (state) { + case ETHTOOL_ID_ACTIVE: + e1000_blink_led(hw); + return 2; + case ETHTOOL_ID_ON: + e1000_led_on(hw); + break; + case ETHTOOL_ID_OFF: + e1000_led_off(hw); + break; + case ETHTOOL_ID_INACTIVE: + e1000_led_off(hw); + e1000_cleanup_led(hw); + break; + } + + return 0; +} +#else +static int igb_phys_id(struct net_device *netdev, u32 data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + unsigned long timeout; + + timeout = data * 1000; + + /* + * msleep_interruptable only accepts unsigned int so we are limited + * in how long a duration we can wait + */ + if (!timeout || timeout > UINT_MAX) + timeout = UINT_MAX; + + e1000_blink_led(hw); + msleep_interruptible(timeout); + + e1000_led_off(hw); + e1000_cleanup_led(hw); + + return 0; +} +#endif /* HAVE_ETHTOOL_SET_PHYS_ID */ + +static int igb_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + int i; + + if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) || + ((ec->rx_coalesce_usecs > 3) && + (ec->rx_coalesce_usecs < IGB_MIN_ITR_USECS)) || + (ec->rx_coalesce_usecs == 2)) + { + printk("set_coalesce:invalid parameter.."); + return -EINVAL; + } + + if ((ec->tx_coalesce_usecs > IGB_MAX_ITR_USECS) || + ((ec->tx_coalesce_usecs > 3) && + (ec->tx_coalesce_usecs < IGB_MIN_ITR_USECS)) || + (ec->tx_coalesce_usecs == 2)) + return -EINVAL; + + if ((adapter->flags & IGB_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs) + return -EINVAL; + + if (ec->tx_max_coalesced_frames_irq) + adapter->tx_work_limit = ec->tx_max_coalesced_frames_irq; + + /* If ITR is disabled, disable DMAC */ + if (ec->rx_coalesce_usecs == 0) { + adapter->dmac = IGB_DMAC_DISABLE; + } + + /* convert to rate of irq's per second */ + if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) + adapter->rx_itr_setting = ec->rx_coalesce_usecs; + else + adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2; + + /* convert to rate of irq's per second */ + if (adapter->flags & IGB_FLAG_QUEUE_PAIRS) + adapter->tx_itr_setting = adapter->rx_itr_setting; + else if (ec->tx_coalesce_usecs && ec->tx_coalesce_usecs <= 3) + adapter->tx_itr_setting = ec->tx_coalesce_usecs; + else + adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2; + + for (i = 0; i < adapter->num_q_vectors; i++) { + struct igb_q_vector *q_vector = adapter->q_vector[i]; + q_vector->tx.work_limit = adapter->tx_work_limit; + if (q_vector->rx.ring) + q_vector->itr_val = adapter->rx_itr_setting; + else + q_vector->itr_val = adapter->tx_itr_setting; + if (q_vector->itr_val && q_vector->itr_val <= 3) + q_vector->itr_val = IGB_START_ITR; + q_vector->set_itr = 1; + } + + return 0; +} + +static int igb_get_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + if (adapter->rx_itr_setting <= 3) + ec->rx_coalesce_usecs = adapter->rx_itr_setting; + else + ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2; + + ec->tx_max_coalesced_frames_irq = adapter->tx_work_limit; + + if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) { + if (adapter->tx_itr_setting <= 3) + ec->tx_coalesce_usecs = adapter->tx_itr_setting; + else + ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2; + } + + return 0; +} + +static int igb_nway_reset(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + if (netif_running(netdev)) + igb_reinit_locked(adapter); + return 0; +} + +#ifdef HAVE_ETHTOOL_GET_SSET_COUNT +static int igb_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return IGB_STATS_LEN; + case ETH_SS_TEST: + return IGB_TEST_LEN; + default: + return -ENOTSUPP; + } +} +#else +static int igb_get_stats_count(struct net_device *netdev) +{ + return IGB_STATS_LEN; +} + +static int igb_diag_test_count(struct net_device *netdev) +{ + return IGB_TEST_LEN; +} +#endif + +static void igb_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); +#ifdef HAVE_NETDEV_STATS_IN_NETDEV + struct net_device_stats *net_stats = &netdev->stats; +#else + struct net_device_stats *net_stats = &adapter->net_stats; +#endif + u64 *queue_stat; + int i, j, k; + char *p; + + igb_update_stats(adapter); + + for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) { + p = (char *)adapter + igb_gstrings_stats[i].stat_offset; + data[i] = (igb_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + for (j = 0; j < IGB_NETDEV_STATS_LEN; j++, i++) { + p = (char *)net_stats + igb_gstrings_net_stats[j].stat_offset; + data[i] = (igb_gstrings_net_stats[j].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + for (j = 0; j < adapter->num_tx_queues; j++) { + queue_stat = (u64 *)&adapter->tx_ring[j]->tx_stats; + for (k = 0; k < IGB_TX_QUEUE_STATS_LEN; k++, i++) + data[i] = queue_stat[k]; + } + for (j = 0; j < adapter->num_rx_queues; j++) { + queue_stat = (u64 *)&adapter->rx_ring[j]->rx_stats; + for (k = 0; k < IGB_RX_QUEUE_STATS_LEN; k++, i++) + data[i] = queue_stat[k]; + } +} + +static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + u8 *p = data; + int i; + + switch (stringset) { + case ETH_SS_TEST: + memcpy(data, *igb_gstrings_test, + IGB_TEST_LEN*ETH_GSTRING_LEN); + break; + case ETH_SS_STATS: + for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) { + memcpy(p, igb_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < IGB_NETDEV_STATS_LEN; i++) { + memcpy(p, igb_gstrings_net_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_tx_queues; i++) { + sprintf(p, "tx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_queue_%u_restart", i); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_rx_queues; i++) { + sprintf(p, "rx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_drops", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_csum_err", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_alloc_failed", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_ipv4_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_ipv4e_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_ipv6_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_ipv6e_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_tcp_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_udp_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_sctp_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_nfs_packets", i); + p += ETH_GSTRING_LEN; + } +/* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */ + break; + } +} + +#ifdef HAVE_ETHTOOL_GET_TS_INFO +static int igb_get_ts_info(struct net_device *dev, + struct ethtool_ts_info *info) +{ + struct igb_adapter *adapter = netdev_priv(dev); + + switch (adapter->hw.mac.type) { +#ifdef HAVE_PTP_1588_CLOCK + case e1000_82575: + info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE; + return 0; + case e1000_82576: + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + + if (adapter->ptp_clock) + info->phc_index = ptp_clock_index(adapter->ptp_clock); + else + info->phc_index = -1; + + info->tx_types = + (1 << HWTSTAMP_TX_OFF) | + (1 << HWTSTAMP_TX_ON); + + info->rx_filters = 1 << HWTSTAMP_FILTER_NONE; + + /* 82576 does not support timestamping all packets. */ + if (adapter->hw.mac.type >= e1000_82580) + info->rx_filters |= 1 << HWTSTAMP_FILTER_ALL; + else + info->rx_filters |= + (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) | + (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) | + (1 << HWTSTAMP_FILTER_PTP_V2_EVENT); + + return 0; +#endif /* HAVE_PTP_1588_CLOCK */ + default: + return -EOPNOTSUPP; + } +} +#endif /* HAVE_ETHTOOL_GET_TS_INFO */ + +#ifdef CONFIG_PM_RUNTIME +static int igb_ethtool_begin(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + pm_runtime_get_sync(&adapter->pdev->dev); + + return 0; +} + +static void igb_ethtool_complete(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + pm_runtime_put(&adapter->pdev->dev); +} +#endif /* CONFIG_PM_RUNTIME */ + +#ifndef HAVE_NDO_SET_FEATURES +static u32 igb_get_rx_csum(struct net_device *netdev) +{ + return !!(netdev->features & NETIF_F_RXCSUM); +} + +static int igb_set_rx_csum(struct net_device *netdev, u32 data) +{ + const u32 feature_list = NETIF_F_RXCSUM; + + if (data) + netdev->features |= feature_list; + else + netdev->features &= ~feature_list; + + return 0; +} + +static int igb_set_tx_csum(struct net_device *netdev, u32 data) +{ + struct igb_adapter *adapter = netdev_priv(netdev); +#ifdef NETIF_F_IPV6_CSUM + u32 feature_list = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; +#else + u32 feature_list = NETIF_F_IP_CSUM; +#endif + + if (adapter->hw.mac.type >= e1000_82576) + feature_list |= NETIF_F_SCTP_CSUM; + + if (data) + netdev->features |= feature_list; + else + netdev->features &= ~feature_list; + + return 0; +} + +#ifdef NETIF_F_TSO +static int igb_set_tso(struct net_device *netdev, u32 data) +{ +#ifdef NETIF_F_TSO6 + const u32 feature_list = NETIF_F_TSO | NETIF_F_TSO6; +#else + const u32 feature_list = NETIF_F_TSO; +#endif + + if (data) + netdev->features |= feature_list; + else + netdev->features &= ~feature_list; + +#ifndef HAVE_NETDEV_VLAN_FEATURES + if (!data) { + struct igb_adapter *adapter = netdev_priv(netdev); + struct net_device *v_netdev; + int i; + + /* disable TSO on all VLANs if they're present */ + if (!adapter->vlgrp) + goto tso_out; + + for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) { + v_netdev = vlan_group_get_device(adapter->vlgrp, i); + if (!v_netdev) + continue; + + v_netdev->features &= ~feature_list; + vlan_group_set_device(adapter->vlgrp, i, v_netdev); + } + } + +tso_out: + +#endif /* HAVE_NETDEV_VLAN_FEATURES */ + return 0; +} + +#endif /* NETIF_F_TSO */ +#ifdef ETHTOOL_GFLAGS +static int igb_set_flags(struct net_device *netdev, u32 data) +{ + u32 supported_flags = ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN | + ETH_FLAG_RXHASH; +#ifndef HAVE_VLAN_RX_REGISTER + u32 changed = netdev->features ^ data; +#endif + int rc; +#ifndef IGB_NO_LRO + + supported_flags |= ETH_FLAG_LRO; +#endif + /* + * Since there is no support for separate tx vlan accel + * enabled make sure tx flag is cleared if rx is. + */ + if (!(data & ETH_FLAG_RXVLAN)) + data &= ~ETH_FLAG_TXVLAN; + + rc = ethtool_op_set_flags(netdev, data, supported_flags); + if (rc) + return rc; +#ifndef HAVE_VLAN_RX_REGISTER + + if (changed & ETH_FLAG_RXVLAN) + igb_vlan_mode(netdev, data); +#endif + + return 0; +} + +#endif /* ETHTOOL_GFLAGS */ +#endif /* HAVE_NDO_SET_FEATURES */ +#ifdef ETHTOOL_SADV_COAL +static int igb_set_adv_coal(struct net_device *netdev, struct ethtool_value *edata) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + switch (edata->data) { + case IGB_DMAC_DISABLE: + adapter->dmac = edata->data; + break; + case IGB_DMAC_MIN: + adapter->dmac = edata->data; + break; + case IGB_DMAC_500: + adapter->dmac = edata->data; + break; + case IGB_DMAC_EN_DEFAULT: + adapter->dmac = edata->data; + break; + case IGB_DMAC_2000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_3000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_4000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_5000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_6000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_7000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_8000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_9000: + adapter->dmac = edata->data; + break; + case IGB_DMAC_MAX: + adapter->dmac = edata->data; + break; + default: + adapter->dmac = IGB_DMAC_DISABLE; + printk("set_dmac: invalid setting, setting DMAC to %d\n", + adapter->dmac); + } + printk("%s: setting DMAC to %d\n", netdev->name, adapter->dmac); + return 0; +} +#endif /* ETHTOOL_SADV_COAL */ +#ifdef ETHTOOL_GADV_COAL +static void igb_get_dmac(struct net_device *netdev, + struct ethtool_value *edata) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + edata->data = adapter->dmac; + + return; +} +#endif + +#ifdef ETHTOOL_GEEE +static int igb_get_eee(struct net_device *netdev, struct ethtool_eee *edata) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ret_val; + u16 phy_data; + + if ((hw->mac.type < e1000_i350) || + (hw->phy.media_type != e1000_media_type_copper)) + return -EOPNOTSUPP; + + edata->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_100baseT_Full); + + if (!hw->dev_spec._82575.eee_disable) + edata->advertised = + mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert); + + /* The IPCNFG and EEER registers are not supported on I354. */ + if (hw->mac.type == e1000_i354) { + e1000_get_eee_status_i354(hw, (bool *)&edata->eee_active); + } else { + u32 eeer; + + eeer = E1000_READ_REG(hw, E1000_EEER); + + /* EEE status on negotiated link */ + if (eeer & E1000_EEER_EEE_NEG) + edata->eee_active = true; + + if (eeer & E1000_EEER_TX_LPI_EN) + edata->tx_lpi_enabled = true; + } + + /* EEE Link Partner Advertised */ + switch (hw->mac.type) { + case e1000_i350: + ret_val = e1000_read_emi_reg(hw, E1000_EEE_LP_ADV_ADDR_I350, + &phy_data); + if (ret_val) + return -ENODATA; + + edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + break; + case e1000_i354: + case e1000_i210: + case e1000_i211: + ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_LP_ADV_ADDR_I210, + E1000_EEE_LP_ADV_DEV_I210, + &phy_data); + if (ret_val) + return -ENODATA; + + edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data); + + break; + default: + break; + } + + edata->eee_enabled = !hw->dev_spec._82575.eee_disable; + + if ((hw->mac.type == e1000_i354) && + (edata->eee_enabled)) + edata->tx_lpi_enabled = true; + + /* + * report correct negotiated EEE status for devices that + * wrongly report EEE at half-duplex + */ + if (adapter->link_duplex == HALF_DUPLEX) { + edata->eee_enabled = false; + edata->eee_active = false; + edata->tx_lpi_enabled = false; + edata->advertised &= ~edata->advertised; + } + + return 0; +} +#endif + +#ifdef ETHTOOL_SEEE +static int igb_set_eee(struct net_device *netdev, + struct ethtool_eee *edata) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct ethtool_eee eee_curr; + s32 ret_val; + + if ((hw->mac.type < e1000_i350) || + (hw->phy.media_type != e1000_media_type_copper)) + return -EOPNOTSUPP; + + ret_val = igb_get_eee(netdev, &eee_curr); + if (ret_val) + return ret_val; + + if (eee_curr.eee_enabled) { + if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) { + dev_err(pci_dev_to_dev(adapter->pdev), + "Setting EEE tx-lpi is not supported\n"); + return -EINVAL; + } + + /* Tx LPI time is not implemented currently */ + if (edata->tx_lpi_timer) { + dev_err(pci_dev_to_dev(adapter->pdev), + "Setting EEE Tx LPI timer is not supported\n"); + return -EINVAL; + } + + if (edata->advertised & + ~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL)) { + dev_err(pci_dev_to_dev(adapter->pdev), + "EEE Advertisement supports only 100Tx and or 100T full duplex\n"); + return -EINVAL; + } + + } else if (!edata->eee_enabled) { + dev_err(pci_dev_to_dev(adapter->pdev), + "Setting EEE options is not supported with EEE disabled\n"); + return -EINVAL; + } + + adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised); + + if (hw->dev_spec._82575.eee_disable != !edata->eee_enabled) { + hw->dev_spec._82575.eee_disable = !edata->eee_enabled; + + /* reset link */ + if (netif_running(netdev)) + igb_reinit_locked(adapter); + else + igb_reset(adapter); + } + + return 0; +} +#endif /* ETHTOOL_SEEE */ + +#ifdef ETHTOOL_GRXRINGS +static int igb_get_rss_hash_opts(struct igb_adapter *adapter, + struct ethtool_rxnfc *cmd) +{ + cmd->data = 0; + + /* Report default options for RSS on igb */ + switch (cmd->flow_type) { + case TCP_V4_FLOW: + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + case UDP_V4_FLOW: + if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP) + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + case SCTP_V4_FLOW: + case AH_ESP_V4_FLOW: + case AH_V4_FLOW: + case ESP_V4_FLOW: + case IPV4_FLOW: + cmd->data |= RXH_IP_SRC | RXH_IP_DST; + break; + case TCP_V6_FLOW: + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + case UDP_V6_FLOW: + if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP) + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + case SCTP_V6_FLOW: + case AH_ESP_V6_FLOW: + case AH_V6_FLOW: + case ESP_V6_FLOW: + case IPV6_FLOW: + cmd->data |= RXH_IP_SRC | RXH_IP_DST; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int igb_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd, +#ifdef HAVE_ETHTOOL_GET_RXNFC_VOID_RULE_LOCS + void *rule_locs) +#else + u32 *rule_locs) +#endif +{ + struct igb_adapter *adapter = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + switch (cmd->cmd) { + case ETHTOOL_GRXRINGS: + cmd->data = adapter->num_rx_queues; + ret = 0; + break; + case ETHTOOL_GRXFH: + ret = igb_get_rss_hash_opts(adapter, cmd); + break; + default: + break; + } + + return ret; +} + +#define UDP_RSS_FLAGS (IGB_FLAG_RSS_FIELD_IPV4_UDP | \ + IGB_FLAG_RSS_FIELD_IPV6_UDP) +static int igb_set_rss_hash_opt(struct igb_adapter *adapter, + struct ethtool_rxnfc *nfc) +{ + u32 flags = adapter->flags; + + /* + * RSS does not support anything other than hashing + * to queues on src and dst IPs and ports + */ + if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3)) + return -EINVAL; + + switch (nfc->flow_type) { + case TCP_V4_FLOW: + case TCP_V6_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST) || + !(nfc->data & RXH_L4_B_0_1) || + !(nfc->data & RXH_L4_B_2_3)) + return -EINVAL; + break; + case UDP_V4_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST)) + return -EINVAL; + switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) { + case 0: + flags &= ~IGB_FLAG_RSS_FIELD_IPV4_UDP; + break; + case (RXH_L4_B_0_1 | RXH_L4_B_2_3): + flags |= IGB_FLAG_RSS_FIELD_IPV4_UDP; + break; + default: + return -EINVAL; + } + break; + case UDP_V6_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST)) + return -EINVAL; + switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) { + case 0: + flags &= ~IGB_FLAG_RSS_FIELD_IPV6_UDP; + break; + case (RXH_L4_B_0_1 | RXH_L4_B_2_3): + flags |= IGB_FLAG_RSS_FIELD_IPV6_UDP; + break; + default: + return -EINVAL; + } + break; + case AH_ESP_V4_FLOW: + case AH_V4_FLOW: + case ESP_V4_FLOW: + case SCTP_V4_FLOW: + case AH_ESP_V6_FLOW: + case AH_V6_FLOW: + case ESP_V6_FLOW: + case SCTP_V6_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST) || + (nfc->data & RXH_L4_B_0_1) || + (nfc->data & RXH_L4_B_2_3)) + return -EINVAL; + break; + default: + return -EINVAL; + } + + /* if we changed something we need to update flags */ + if (flags != adapter->flags) { + struct e1000_hw *hw = &adapter->hw; + u32 mrqc = E1000_READ_REG(hw, E1000_MRQC); + + if ((flags & UDP_RSS_FLAGS) && + !(adapter->flags & UDP_RSS_FLAGS)) + DPRINTK(DRV, WARNING, + "enabling UDP RSS: fragmented packets may arrive out of order to the stack above\n"); + + adapter->flags = flags; + + /* Perform hash on these packet types */ + mrqc |= E1000_MRQC_RSS_FIELD_IPV4 | + E1000_MRQC_RSS_FIELD_IPV4_TCP | + E1000_MRQC_RSS_FIELD_IPV6 | + E1000_MRQC_RSS_FIELD_IPV6_TCP; + + mrqc &= ~(E1000_MRQC_RSS_FIELD_IPV4_UDP | + E1000_MRQC_RSS_FIELD_IPV6_UDP); + + if (flags & IGB_FLAG_RSS_FIELD_IPV4_UDP) + mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP; + + if (flags & IGB_FLAG_RSS_FIELD_IPV6_UDP) + mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP; + + E1000_WRITE_REG(hw, E1000_MRQC, mrqc); + } + + return 0; +} + +static int igb_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd) +{ + struct igb_adapter *adapter = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + switch (cmd->cmd) { + case ETHTOOL_SRXFH: + ret = igb_set_rss_hash_opt(adapter, cmd); + break; + default: + break; + } + + return ret; +} +#endif /* ETHTOOL_GRXRINGS */ + +static const struct ethtool_ops igb_ethtool_ops = { + .get_settings = igb_get_settings, + .set_settings = igb_set_settings, + .get_drvinfo = igb_get_drvinfo, + .get_regs_len = igb_get_regs_len, + .get_regs = igb_get_regs, + .get_wol = igb_get_wol, + .set_wol = igb_set_wol, + .get_msglevel = igb_get_msglevel, + .set_msglevel = igb_set_msglevel, + .nway_reset = igb_nway_reset, + .get_link = igb_get_link, + .get_eeprom_len = igb_get_eeprom_len, + .get_eeprom = igb_get_eeprom, + .set_eeprom = igb_set_eeprom, + .get_ringparam = igb_get_ringparam, + .set_ringparam = igb_set_ringparam, + .get_pauseparam = igb_get_pauseparam, + .set_pauseparam = igb_set_pauseparam, + .self_test = igb_diag_test, + .get_strings = igb_get_strings, +#ifndef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT +#ifdef HAVE_ETHTOOL_SET_PHYS_ID + .set_phys_id = igb_set_phys_id, +#else + .phys_id = igb_phys_id, +#endif /* HAVE_ETHTOOL_SET_PHYS_ID */ +#endif /* HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT */ +#ifdef HAVE_ETHTOOL_GET_SSET_COUNT + .get_sset_count = igb_get_sset_count, +#else + .get_stats_count = igb_get_stats_count, + .self_test_count = igb_diag_test_count, +#endif + .get_ethtool_stats = igb_get_ethtool_stats, +#ifdef HAVE_ETHTOOL_GET_PERM_ADDR + .get_perm_addr = ethtool_op_get_perm_addr, +#endif + .get_coalesce = igb_get_coalesce, + .set_coalesce = igb_set_coalesce, +#ifndef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT +#ifdef HAVE_ETHTOOL_GET_TS_INFO + .get_ts_info = igb_get_ts_info, +#endif /* HAVE_ETHTOOL_GET_TS_INFO */ +#endif /* HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT */ +#ifdef CONFIG_PM_RUNTIME + .begin = igb_ethtool_begin, + .complete = igb_ethtool_complete, +#endif /* CONFIG_PM_RUNTIME */ +#ifndef HAVE_NDO_SET_FEATURES + .get_rx_csum = igb_get_rx_csum, + .set_rx_csum = igb_set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = igb_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, +#ifdef NETIF_F_TSO + .get_tso = ethtool_op_get_tso, + .set_tso = igb_set_tso, +#endif +#ifdef ETHTOOL_GFLAGS + .get_flags = ethtool_op_get_flags, + .set_flags = igb_set_flags, +#endif /* ETHTOOL_GFLAGS */ +#endif /* HAVE_NDO_SET_FEATURES */ +#ifdef ETHTOOL_GADV_COAL + .get_advcoal = igb_get_adv_coal, + .set_advcoal = igb_set_dmac_coal, +#endif /* ETHTOOL_GADV_COAL */ +#ifndef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT +#ifdef ETHTOOL_GEEE + .get_eee = igb_get_eee, +#endif +#ifdef ETHTOOL_SEEE + .set_eee = igb_set_eee, +#endif +#endif /* HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT */ +#ifdef ETHTOOL_GRXRINGS + .get_rxnfc = igb_get_rxnfc, + .set_rxnfc = igb_set_rxnfc, +#endif +}; + +#ifdef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT +static const struct ethtool_ops_ext igb_ethtool_ops_ext = { + .size = sizeof(struct ethtool_ops_ext), + .get_ts_info = igb_get_ts_info, + .set_phys_id = igb_set_phys_id, + .get_eee = igb_get_eee, + .set_eee = igb_set_eee, +}; + +void igb_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &igb_ethtool_ops); + set_ethtool_ops_ext(netdev, &igb_ethtool_ops_ext); +} +#else +void igb_set_ethtool_ops(struct net_device *netdev) +{ + /* have to "undeclare" const on this struct to remove warnings */ + SET_ETHTOOL_OPS(netdev, (struct ethtool_ops *)&igb_ethtool_ops); +} +#endif /* HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT */ +#endif /* SIOCETHTOOL */ diff --git a/kernel/linux/kni/ethtool/igb/igb_main.c b/kernel/linux/kni/ethtool/igb/igb_main.c new file mode 100644 index 00000000..af378d2f --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb_main.c @@ -0,0 +1,10344 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/vmalloc.h> +#include <linux/pagemap.h> +#include <linux/netdevice.h> +#include <linux/tcp.h> +#ifdef NETIF_F_TSO +#include <net/checksum.h> +#ifdef NETIF_F_TSO6 +#include <linux/ipv6.h> +#include <net/ip6_checksum.h> +#endif +#endif +#ifdef SIOCGMIIPHY +#include <linux/mii.h> +#endif +#ifdef SIOCETHTOOL +#include <linux/ethtool.h> +#endif +#include <linux/if_vlan.h> +#ifdef CONFIG_PM_RUNTIME +#include <linux/pm_runtime.h> +#endif /* CONFIG_PM_RUNTIME */ + +#include <linux/if_bridge.h> +#include "igb.h" +#include "igb_vmdq.h" + +#include <linux/uio_driver.h> + +#if defined(DEBUG) || defined (DEBUG_DUMP) || defined (DEBUG_ICR) || defined(DEBUG_ITR) +#define DRV_DEBUG "_debug" +#else +#define DRV_DEBUG +#endif +#define DRV_HW_PERF +#define VERSION_SUFFIX + +#define MAJ 5 +#define MIN 0 +#define BUILD 6 +#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." __stringify(BUILD) VERSION_SUFFIX DRV_DEBUG DRV_HW_PERF + +char igb_driver_name[] = "igb"; +char igb_driver_version[] = DRV_VERSION; +static const char igb_driver_string[] = + "Intel(R) Gigabit Ethernet Network Driver"; +static const char igb_copyright[] = + "Copyright (c) 2007-2013 Intel Corporation."; + +const struct pci_device_id igb_pci_tbl[] = { + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_1GBPS) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_SGMII) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SGMII) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER_FLASHLESS) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES_FLASHLESS) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I211_COPPER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES) }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER) }, + /* required last entry */ + {0, } +}; + +//MODULE_DEVICE_TABLE(pci, igb_pci_tbl); +static void igb_set_sriov_capability(struct igb_adapter *adapter) __attribute__((__unused__)); +void igb_reset(struct igb_adapter *); +static int igb_setup_all_tx_resources(struct igb_adapter *); +static int igb_setup_all_rx_resources(struct igb_adapter *); +static void igb_free_all_tx_resources(struct igb_adapter *); +static void igb_free_all_rx_resources(struct igb_adapter *); +static void igb_setup_mrqc(struct igb_adapter *); +void igb_update_stats(struct igb_adapter *); +static int igb_probe(struct pci_dev *, const struct pci_device_id *); +static void __devexit igb_remove(struct pci_dev *pdev); +static int igb_sw_init(struct igb_adapter *); +static int igb_open(struct net_device *); +static int igb_close(struct net_device *); +static void igb_configure(struct igb_adapter *); +static void igb_configure_tx(struct igb_adapter *); +static void igb_configure_rx(struct igb_adapter *); +static void igb_clean_all_tx_rings(struct igb_adapter *); +static void igb_clean_all_rx_rings(struct igb_adapter *); +static void igb_clean_tx_ring(struct igb_ring *); +static void igb_set_rx_mode(struct net_device *); +#ifdef HAVE_TIMER_SETUP +static void igb_update_phy_info(struct timer_list *); +static void igb_watchdog(struct timer_list *); +#else +static void igb_update_phy_info(unsigned long); +static void igb_watchdog(unsigned long); +#endif +static void igb_watchdog_task(struct work_struct *); +static void igb_dma_err_task(struct work_struct *); +#ifdef HAVE_TIMER_SETUP +static void igb_dma_err_timer(struct timer_list *); +#else +static void igb_dma_err_timer(unsigned long data); +#endif +static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, struct net_device *); +static struct net_device_stats *igb_get_stats(struct net_device *); +static int igb_change_mtu(struct net_device *, int); +void igb_full_sync_mac_table(struct igb_adapter *adapter); +static int igb_set_mac(struct net_device *, void *); +static void igb_set_uta(struct igb_adapter *adapter); +static irqreturn_t igb_intr(int irq, void *); +static irqreturn_t igb_intr_msi(int irq, void *); +static irqreturn_t igb_msix_other(int irq, void *); +static irqreturn_t igb_msix_ring(int irq, void *); +#ifdef IGB_DCA +static void igb_update_dca(struct igb_q_vector *); +static void igb_setup_dca(struct igb_adapter *); +#endif /* IGB_DCA */ +static int igb_poll(struct napi_struct *, int); +static bool igb_clean_tx_irq(struct igb_q_vector *); +static bool igb_clean_rx_irq(struct igb_q_vector *, int); +static int igb_ioctl(struct net_device *, struct ifreq *, int cmd); +static void igb_tx_timeout(struct net_device *); +static void igb_reset_task(struct work_struct *); +#ifdef HAVE_VLAN_RX_REGISTER +static void igb_vlan_mode(struct net_device *, struct vlan_group *); +#endif +#ifdef HAVE_VLAN_PROTOCOL +static int igb_vlan_rx_add_vid(struct net_device *, + __be16 proto, u16); +static int igb_vlan_rx_kill_vid(struct net_device *, + __be16 proto, u16); +#elif defined HAVE_INT_NDO_VLAN_RX_ADD_VID +#ifdef NETIF_F_HW_VLAN_CTAG_RX +static int igb_vlan_rx_add_vid(struct net_device *, + __always_unused __be16 proto, u16); +static int igb_vlan_rx_kill_vid(struct net_device *, + __always_unused __be16 proto, u16); +#else +static int igb_vlan_rx_add_vid(struct net_device *, u16); +static int igb_vlan_rx_kill_vid(struct net_device *, u16); +#endif +#else +static void igb_vlan_rx_add_vid(struct net_device *, u16); +static void igb_vlan_rx_kill_vid(struct net_device *, u16); +#endif +static void igb_restore_vlan(struct igb_adapter *); +void igb_rar_set(struct igb_adapter *adapter, u32 index); +static void igb_ping_all_vfs(struct igb_adapter *); +static void igb_msg_task(struct igb_adapter *); +static void igb_vmm_control(struct igb_adapter *); +static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *); +static void igb_restore_vf_multicasts(struct igb_adapter *adapter); +static void igb_process_mdd_event(struct igb_adapter *); +#ifdef IFLA_VF_MAX +static int igb_ndo_set_vf_mac( struct net_device *netdev, int vf, u8 *mac); +static int igb_ndo_set_vf_vlan(struct net_device *netdev, +#ifdef HAVE_VF_VLAN_PROTO + int vf, u16 vlan, u8 qos, __be16 vlan_proto); +#else + int vf, u16 vlan, u8 qos); +#endif +#ifdef HAVE_VF_SPOOFCHK_CONFIGURE +static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, + bool setting); +#endif +#ifdef HAVE_VF_MIN_MAX_TXRATE +static int igb_ndo_set_vf_bw(struct net_device *, int, int, int); +#else /* HAVE_VF_MIN_MAX_TXRATE */ +static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate); +#endif /* HAVE_VF_MIN_MAX_TXRATE */ +static int igb_ndo_get_vf_config(struct net_device *netdev, int vf, + struct ifla_vf_info *ivi); +static void igb_check_vf_rate_limit(struct igb_adapter *); +#endif +static int igb_vf_configure(struct igb_adapter *adapter, int vf); +#ifdef CONFIG_PM +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS +static int igb_suspend(struct device *dev); +static int igb_resume(struct device *dev); +#ifdef CONFIG_PM_RUNTIME +static int igb_runtime_suspend(struct device *dev); +static int igb_runtime_resume(struct device *dev); +static int igb_runtime_idle(struct device *dev); +#endif /* CONFIG_PM_RUNTIME */ +static const struct dev_pm_ops igb_pm_ops = { +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34) + .suspend = igb_suspend, + .resume = igb_resume, + .freeze = igb_suspend, + .thaw = igb_resume, + .poweroff = igb_suspend, + .restore = igb_resume, +#ifdef CONFIG_PM_RUNTIME + .runtime_suspend = igb_runtime_suspend, + .runtime_resume = igb_runtime_resume, + .runtime_idle = igb_runtime_idle, +#endif +#else /* Linux >= 2.6.34 */ + SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume) +#ifdef CONFIG_PM_RUNTIME + SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume, + igb_runtime_idle) +#endif /* CONFIG_PM_RUNTIME */ +#endif /* Linux version */ +}; +#else +static int igb_suspend(struct pci_dev *pdev, pm_message_t state); +static int igb_resume(struct pci_dev *pdev); +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ +#endif /* CONFIG_PM */ +#ifndef USE_REBOOT_NOTIFIER +static void igb_shutdown(struct pci_dev *); +#else +static int igb_notify_reboot(struct notifier_block *, unsigned long, void *); +static struct notifier_block igb_notifier_reboot = { + .notifier_call = igb_notify_reboot, + .next = NULL, + .priority = 0 +}; +#endif +#ifdef IGB_DCA +static int igb_notify_dca(struct notifier_block *, unsigned long, void *); +static struct notifier_block dca_notifier = { + .notifier_call = igb_notify_dca, + .next = NULL, + .priority = 0 +}; +#endif +#ifdef CONFIG_NET_POLL_CONTROLLER +/* for netdump / net console */ +static void igb_netpoll(struct net_device *); +#endif + +#ifdef HAVE_PCI_ERS +static pci_ers_result_t igb_io_error_detected(struct pci_dev *, + pci_channel_state_t); +static pci_ers_result_t igb_io_slot_reset(struct pci_dev *); +static void igb_io_resume(struct pci_dev *); + +static struct pci_error_handlers igb_err_handler = { + .error_detected = igb_io_error_detected, + .slot_reset = igb_io_slot_reset, + .resume = igb_io_resume, +}; +#endif + +static void igb_init_fw(struct igb_adapter *adapter); +static void igb_init_dmac(struct igb_adapter *adapter, u32 pba); + +static struct pci_driver igb_driver = { + .name = igb_driver_name, + .id_table = igb_pci_tbl, + .probe = igb_probe, + .remove = __devexit_p(igb_remove), +#ifdef CONFIG_PM +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS + .driver.pm = &igb_pm_ops, +#else + .suspend = igb_suspend, + .resume = igb_resume, +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ +#endif /* CONFIG_PM */ +#ifndef USE_REBOOT_NOTIFIER + .shutdown = igb_shutdown, +#endif +#ifdef HAVE_PCI_ERS + .err_handler = &igb_err_handler +#endif +}; + +//MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>"); +//MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver"); +//MODULE_LICENSE("GPL"); +//MODULE_VERSION(DRV_VERSION); + +static void igb_vfta_set(struct igb_adapter *adapter, u32 vid, bool add) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_host_mng_dhcp_cookie *mng_cookie = &hw->mng_cookie; + u32 index = (vid >> E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK; + u32 mask = 1 << (vid & E1000_VFTA_ENTRY_BIT_SHIFT_MASK); + u32 vfta; + + /* + * if this is the management vlan the only option is to add it in so + * that the management pass through will continue to work + */ + if ((mng_cookie->status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && + (vid == mng_cookie->vlan_id)) + add = TRUE; + + vfta = adapter->shadow_vfta[index]; + + if (add) + vfta |= mask; + else + vfta &= ~mask; + + e1000_write_vfta(hw, index, vfta); + adapter->shadow_vfta[index] = vfta; +} + +static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE; +//module_param(debug, int, 0); +//MODULE_PARM_DESC(debug, "Debug level (0=none, ..., 16=all)"); + +/** + * igb_init_module - Driver Registration Routine + * + * igb_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + **/ +static int __init igb_init_module(void) +{ + int ret; + + printk(KERN_INFO "%s - version %s\n", + igb_driver_string, igb_driver_version); + + printk(KERN_INFO "%s\n", igb_copyright); +#ifdef IGB_HWMON +/* only use IGB_PROCFS if IGB_HWMON is not defined */ +#else +#ifdef IGB_PROCFS + if (igb_procfs_topdir_init()) + printk(KERN_INFO "Procfs failed to initialize topdir\n"); +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ + +#ifdef IGB_DCA + dca_register_notify(&dca_notifier); +#endif + ret = pci_register_driver(&igb_driver); +#ifdef USE_REBOOT_NOTIFIER + if (ret >= 0) { + register_reboot_notifier(&igb_notifier_reboot); + } +#endif + return ret; +} + +#undef module_init +#define module_init(x) static int x(void) __attribute__((__unused__)); +module_init(igb_init_module); + +/** + * igb_exit_module - Driver Exit Cleanup Routine + * + * igb_exit_module is called just before the driver is removed + * from memory. + **/ +static void __exit igb_exit_module(void) +{ +#ifdef IGB_DCA + dca_unregister_notify(&dca_notifier); +#endif +#ifdef USE_REBOOT_NOTIFIER + unregister_reboot_notifier(&igb_notifier_reboot); +#endif + pci_unregister_driver(&igb_driver); + +#ifdef IGB_HWMON +/* only compile IGB_PROCFS if IGB_HWMON is not defined */ +#else +#ifdef IGB_PROCFS + igb_procfs_topdir_exit(); +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ +} + +#undef module_exit +#define module_exit(x) static void x(void) __attribute__((__unused__)); +module_exit(igb_exit_module); + +#define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1)) +/** + * igb_cache_ring_register - Descriptor ring to register mapping + * @adapter: board private structure to initialize + * + * Once we know the feature-set enabled for the device, we'll cache + * the register offset the descriptor ring is assigned to. + **/ +static void igb_cache_ring_register(struct igb_adapter *adapter) +{ + int i = 0, j = 0; + u32 rbase_offset = adapter->vfs_allocated_count; + + switch (adapter->hw.mac.type) { + case e1000_82576: + /* The queues are allocated for virtualization such that VF 0 + * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc. + * In order to avoid collision we start at the first free queue + * and continue consuming queues in the same sequence + */ + if ((adapter->rss_queues > 1) && adapter->vmdq_pools) { + for (; i < adapter->rss_queues; i++) + adapter->rx_ring[i]->reg_idx = rbase_offset + + Q_IDX_82576(i); + } + case e1000_82575: + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + default: + for (; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i]->reg_idx = rbase_offset + i; + for (; j < adapter->num_tx_queues; j++) + adapter->tx_ring[j]->reg_idx = rbase_offset + j; + break; + } +} + +static void igb_configure_lli(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u16 port; + + /* LLI should only be enabled for MSI-X or MSI interrupts */ + if (!adapter->msix_entries && !(adapter->flags & IGB_FLAG_HAS_MSI)) + return; + + if (adapter->lli_port) { + /* use filter 0 for port */ + port = htons((u16)adapter->lli_port); + E1000_WRITE_REG(hw, E1000_IMIR(0), + (port | E1000_IMIR_PORT_IM_EN)); + E1000_WRITE_REG(hw, E1000_IMIREXT(0), + (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP)); + } + + if (adapter->flags & IGB_FLAG_LLI_PUSH) { + /* use filter 1 for push flag */ + E1000_WRITE_REG(hw, E1000_IMIR(1), + (E1000_IMIR_PORT_BP | E1000_IMIR_PORT_IM_EN)); + E1000_WRITE_REG(hw, E1000_IMIREXT(1), + (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_PSH)); + } + + if (adapter->lli_size) { + /* use filter 2 for size */ + E1000_WRITE_REG(hw, E1000_IMIR(2), + (E1000_IMIR_PORT_BP | E1000_IMIR_PORT_IM_EN)); + E1000_WRITE_REG(hw, E1000_IMIREXT(2), + (adapter->lli_size | E1000_IMIREXT_CTRL_BP)); + } + +} + +/** + * igb_write_ivar - configure ivar for given MSI-X vector + * @hw: pointer to the HW structure + * @msix_vector: vector number we are allocating to a given ring + * @index: row index of IVAR register to write within IVAR table + * @offset: column offset of in IVAR, should be multiple of 8 + * + * This function is intended to handle the writing of the IVAR register + * for adapters 82576 and newer. The IVAR table consists of 2 columns, + * each containing an cause allocation for an Rx and Tx ring, and a + * variable number of rows depending on the number of queues supported. + **/ +static void igb_write_ivar(struct e1000_hw *hw, int msix_vector, + int index, int offset) +{ + u32 ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index); + + /* clear any bits that are currently set */ + ivar &= ~((u32)0xFF << offset); + + /* write vector and valid bit */ + ivar |= (msix_vector | E1000_IVAR_VALID) << offset; + + E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar); +} + +#define IGB_N0_QUEUE -1 +static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector) +{ + struct igb_adapter *adapter = q_vector->adapter; + struct e1000_hw *hw = &adapter->hw; + int rx_queue = IGB_N0_QUEUE; + int tx_queue = IGB_N0_QUEUE; + u32 msixbm = 0; + + if (q_vector->rx.ring) + rx_queue = q_vector->rx.ring->reg_idx; + if (q_vector->tx.ring) + tx_queue = q_vector->tx.ring->reg_idx; + + switch (hw->mac.type) { + case e1000_82575: + /* The 82575 assigns vectors using a bitmask, which matches the + bitmask for the EICR/EIMS/EIMC registers. To assign one + or more queues to a vector, we write the appropriate bits + into the MSIXBM register for that vector. */ + if (rx_queue > IGB_N0_QUEUE) + msixbm = E1000_EICR_RX_QUEUE0 << rx_queue; + if (tx_queue > IGB_N0_QUEUE) + msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue; + if (!adapter->msix_entries && msix_vector == 0) + msixbm |= E1000_EIMS_OTHER; + E1000_WRITE_REG_ARRAY(hw, E1000_MSIXBM(0), msix_vector, msixbm); + q_vector->eims_value = msixbm; + break; + case e1000_82576: + /* + * 82576 uses a table that essentially consists of 2 columns + * with 8 rows. The ordering is column-major so we use the + * lower 3 bits as the row index, and the 4th bit as the + * column offset. + */ + if (rx_queue > IGB_N0_QUEUE) + igb_write_ivar(hw, msix_vector, + rx_queue & 0x7, + (rx_queue & 0x8) << 1); + if (tx_queue > IGB_N0_QUEUE) + igb_write_ivar(hw, msix_vector, + tx_queue & 0x7, + ((tx_queue & 0x8) << 1) + 8); + q_vector->eims_value = 1 << msix_vector; + break; + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + /* + * On 82580 and newer adapters the scheme is similar to 82576 + * however instead of ordering column-major we have things + * ordered row-major. So we traverse the table by using + * bit 0 as the column offset, and the remaining bits as the + * row index. + */ + if (rx_queue > IGB_N0_QUEUE) + igb_write_ivar(hw, msix_vector, + rx_queue >> 1, + (rx_queue & 0x1) << 4); + if (tx_queue > IGB_N0_QUEUE) + igb_write_ivar(hw, msix_vector, + tx_queue >> 1, + ((tx_queue & 0x1) << 4) + 8); + q_vector->eims_value = 1 << msix_vector; + break; + default: + BUG(); + break; + } + + /* add q_vector eims value to global eims_enable_mask */ + adapter->eims_enable_mask |= q_vector->eims_value; + + /* configure q_vector to set itr on first interrupt */ + q_vector->set_itr = 1; +} + +/** + * igb_configure_msix - Configure MSI-X hardware + * + * igb_configure_msix sets up the hardware to properly + * generate MSI-X interrupts. + **/ +static void igb_configure_msix(struct igb_adapter *adapter) +{ + u32 tmp; + int i, vector = 0; + struct e1000_hw *hw = &adapter->hw; + + adapter->eims_enable_mask = 0; + + /* set vector for other causes, i.e. link changes */ + switch (hw->mac.type) { + case e1000_82575: + tmp = E1000_READ_REG(hw, E1000_CTRL_EXT); + /* enable MSI-X PBA support*/ + tmp |= E1000_CTRL_EXT_PBA_CLR; + + /* Auto-Mask interrupts upon ICR read. */ + tmp |= E1000_CTRL_EXT_EIAME; + tmp |= E1000_CTRL_EXT_IRCA; + + E1000_WRITE_REG(hw, E1000_CTRL_EXT, tmp); + + /* enable msix_other interrupt */ + E1000_WRITE_REG_ARRAY(hw, E1000_MSIXBM(0), vector++, + E1000_EIMS_OTHER); + adapter->eims_other = E1000_EIMS_OTHER; + + break; + + case e1000_82576: + case e1000_82580: + case e1000_i350: + case e1000_i354: + case e1000_i210: + case e1000_i211: + /* Turn on MSI-X capability first, or our settings + * won't stick. And it will take days to debug. */ + E1000_WRITE_REG(hw, E1000_GPIE, E1000_GPIE_MSIX_MODE | + E1000_GPIE_PBA | E1000_GPIE_EIAME | + E1000_GPIE_NSICR); + + /* enable msix_other interrupt */ + adapter->eims_other = 1 << vector; + tmp = (vector++ | E1000_IVAR_VALID) << 8; + + E1000_WRITE_REG(hw, E1000_IVAR_MISC, tmp); + break; + default: + /* do nothing, since nothing else supports MSI-X */ + break; + } /* switch (hw->mac.type) */ + + adapter->eims_enable_mask |= adapter->eims_other; + + for (i = 0; i < adapter->num_q_vectors; i++) + igb_assign_vector(adapter->q_vector[i], vector++); + + E1000_WRITE_FLUSH(hw); +} + +/** + * igb_request_msix - Initialize MSI-X interrupts + * + * igb_request_msix allocates MSI-X vectors and requests interrupts from the + * kernel. + **/ +static int igb_request_msix(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + int i, err = 0, vector = 0, free_vector = 0; + + err = request_irq(adapter->msix_entries[vector].vector, + &igb_msix_other, 0, netdev->name, adapter); + if (err) + goto err_out; + + for (i = 0; i < adapter->num_q_vectors; i++) { + struct igb_q_vector *q_vector = adapter->q_vector[i]; + + vector++; + + q_vector->itr_register = hw->hw_addr + E1000_EITR(vector); + + if (q_vector->rx.ring && q_vector->tx.ring) + sprintf(q_vector->name, "%s-TxRx-%u", netdev->name, + q_vector->rx.ring->queue_index); + else if (q_vector->tx.ring) + sprintf(q_vector->name, "%s-tx-%u", netdev->name, + q_vector->tx.ring->queue_index); + else if (q_vector->rx.ring) + sprintf(q_vector->name, "%s-rx-%u", netdev->name, + q_vector->rx.ring->queue_index); + else + sprintf(q_vector->name, "%s-unused", netdev->name); + + err = request_irq(adapter->msix_entries[vector].vector, + igb_msix_ring, 0, q_vector->name, + q_vector); + if (err) + goto err_free; + } + + igb_configure_msix(adapter); + return 0; + +err_free: + /* free already assigned IRQs */ + free_irq(adapter->msix_entries[free_vector++].vector, adapter); + + vector--; + for (i = 0; i < vector; i++) { + free_irq(adapter->msix_entries[free_vector++].vector, + adapter->q_vector[i]); + } +err_out: + return err; +} + +static void igb_reset_interrupt_capability(struct igb_adapter *adapter) +{ + if (adapter->msix_entries) { + pci_disable_msix(adapter->pdev); + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + } else if (adapter->flags & IGB_FLAG_HAS_MSI) { + pci_disable_msi(adapter->pdev); + } +} + +/** + * igb_free_q_vector - Free memory allocated for specific interrupt vector + * @adapter: board private structure to initialize + * @v_idx: Index of vector to be freed + * + * This function frees the memory allocated to the q_vector. In addition if + * NAPI is enabled it will delete any references to the NAPI struct prior + * to freeing the q_vector. + **/ +static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx) +{ + struct igb_q_vector *q_vector = adapter->q_vector[v_idx]; + + if (q_vector->tx.ring) + adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL; + + if (q_vector->rx.ring) + adapter->tx_ring[q_vector->rx.ring->queue_index] = NULL; + + adapter->q_vector[v_idx] = NULL; + netif_napi_del(&q_vector->napi); +#ifndef IGB_NO_LRO + __skb_queue_purge(&q_vector->lrolist.active); +#endif + kfree(q_vector); +} + +/** + * igb_free_q_vectors - Free memory allocated for interrupt vectors + * @adapter: board private structure to initialize + * + * This function frees the memory allocated to the q_vectors. In addition if + * NAPI is enabled it will delete any references to the NAPI struct prior + * to freeing the q_vector. + **/ +static void igb_free_q_vectors(struct igb_adapter *adapter) +{ + int v_idx = adapter->num_q_vectors; + + adapter->num_tx_queues = 0; + adapter->num_rx_queues = 0; + adapter->num_q_vectors = 0; + + while (v_idx--) + igb_free_q_vector(adapter, v_idx); +} + +/** + * igb_clear_interrupt_scheme - reset the device to a state of no interrupts + * + * This function resets the device so that it has 0 rx queues, tx queues, and + * MSI-X interrupts allocated. + */ +static void igb_clear_interrupt_scheme(struct igb_adapter *adapter) +{ + igb_free_q_vectors(adapter); + igb_reset_interrupt_capability(adapter); +} + +/** + * igb_process_mdd_event + * @adapter - board private structure + * + * Identify a malicious VF, disable the VF TX/RX queues and log a message. + */ +static void igb_process_mdd_event(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 lvmmc, vfte, vfre, mdfb; + u8 vf_queue; + + lvmmc = E1000_READ_REG(hw, E1000_LVMMC); + vf_queue = lvmmc >> 29; + + /* VF index cannot be bigger or equal to VFs allocated */ + if (vf_queue >= adapter->vfs_allocated_count) + return; + + netdev_info(adapter->netdev, + "VF %d misbehaved. VF queues are disabled. " + "VM misbehavior code is 0x%x\n", vf_queue, lvmmc); + + /* Disable VFTE and VFRE related bits */ + vfte = E1000_READ_REG(hw, E1000_VFTE); + vfte &= ~(1 << vf_queue); + E1000_WRITE_REG(hw, E1000_VFTE, vfte); + + vfre = E1000_READ_REG(hw, E1000_VFRE); + vfre &= ~(1 << vf_queue); + E1000_WRITE_REG(hw, E1000_VFRE, vfre); + + /* Disable MDFB related bit. Clear on write */ + mdfb = E1000_READ_REG(hw, E1000_MDFB); + mdfb |= (1 << vf_queue); + E1000_WRITE_REG(hw, E1000_MDFB, mdfb); + + /* Reset the specific VF */ + E1000_WRITE_REG(hw, E1000_VTCTRL(vf_queue), E1000_VTCTRL_RST); +} + +/** + * igb_disable_mdd + * @adapter - board private structure + * + * Disable MDD behavior in the HW + **/ +static void igb_disable_mdd(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 reg; + + if ((hw->mac.type != e1000_i350) || + (hw->mac.type != e1000_i354)) + return; + + reg = E1000_READ_REG(hw, E1000_DTXCTL); + reg &= (~E1000_DTXCTL_MDP_EN); + E1000_WRITE_REG(hw, E1000_DTXCTL, reg); +} + +/** + * igb_enable_mdd + * @adapter - board private structure + * + * Enable the HW to detect malicious driver and sends an interrupt to + * the driver. + **/ +static void igb_enable_mdd(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 reg; + + /* Only available on i350 device */ + if (hw->mac.type != e1000_i350) + return; + + reg = E1000_READ_REG(hw, E1000_DTXCTL); + reg |= E1000_DTXCTL_MDP_EN; + E1000_WRITE_REG(hw, E1000_DTXCTL, reg); +} + +/** + * igb_reset_sriov_capability - disable SR-IOV if enabled + * + * Attempt to disable single root IO virtualization capabilites present in the + * kernel. + **/ +static void igb_reset_sriov_capability(struct igb_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct e1000_hw *hw = &adapter->hw; + + /* reclaim resources allocated to VFs */ + if (adapter->vf_data) { + if (!pci_vfs_assigned(pdev)) { + /* + * disable iov and allow time for transactions to + * clear + */ + pci_disable_sriov(pdev); + msleep(500); + + dev_info(pci_dev_to_dev(pdev), "IOV Disabled\n"); + } else { + dev_info(pci_dev_to_dev(pdev), "IOV Not Disabled\n " + "VF(s) are assigned to guests!\n"); + } + /* Disable Malicious Driver Detection */ + igb_disable_mdd(adapter); + + /* free vf data storage */ + kfree(adapter->vf_data); + adapter->vf_data = NULL; + + /* switch rings back to PF ownership */ + E1000_WRITE_REG(hw, E1000_IOVCTL, + E1000_IOVCTL_REUSE_VFQ); + E1000_WRITE_FLUSH(hw); + msleep(100); + } + + adapter->vfs_allocated_count = 0; +} + +/** + * igb_set_sriov_capability - setup SR-IOV if supported + * + * Attempt to enable single root IO virtualization capabilites present in the + * kernel. + **/ +static void igb_set_sriov_capability(struct igb_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + int old_vfs = 0; + int i; + + old_vfs = pci_num_vf(pdev); + if (old_vfs) { + dev_info(pci_dev_to_dev(pdev), + "%d pre-allocated VFs found - override " + "max_vfs setting of %d\n", old_vfs, + adapter->vfs_allocated_count); + adapter->vfs_allocated_count = old_vfs; + } + /* no VFs requested, do nothing */ + if (!adapter->vfs_allocated_count) + return; + + /* allocate vf data storage */ + adapter->vf_data = kcalloc(adapter->vfs_allocated_count, + sizeof(struct vf_data_storage), + GFP_KERNEL); + + if (adapter->vf_data) { + if (!old_vfs) { + if (pci_enable_sriov(pdev, + adapter->vfs_allocated_count)) + goto err_out; + } + for (i = 0; i < adapter->vfs_allocated_count; i++) + igb_vf_configure(adapter, i); + + switch (adapter->hw.mac.type) { + case e1000_82576: + case e1000_i350: + /* Enable VM to VM loopback by default */ + adapter->flags |= IGB_FLAG_LOOPBACK_ENABLE; + break; + default: + /* Currently no other hardware supports loopback */ + break; + } + + /* DMA Coalescing is not supported in IOV mode. */ + if (adapter->hw.mac.type >= e1000_i350) + adapter->dmac = IGB_DMAC_DISABLE; + if (adapter->hw.mac.type < e1000_i350) + adapter->flags |= IGB_FLAG_DETECT_BAD_DMA; + return; + + } + +err_out: + kfree(adapter->vf_data); + adapter->vf_data = NULL; + adapter->vfs_allocated_count = 0; + dev_warn(pci_dev_to_dev(pdev), + "Failed to initialize SR-IOV virtualization\n"); +} + +/** + * igb_set_interrupt_capability - set MSI or MSI-X if supported + * + * Attempt to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix) +{ + struct pci_dev *pdev = adapter->pdev; + int err; + int numvecs, i; + + if (!msix) + adapter->int_mode = IGB_INT_MODE_MSI; + + /* Number of supported queues. */ + adapter->num_rx_queues = adapter->rss_queues; + + if (adapter->vmdq_pools > 1) + adapter->num_rx_queues += adapter->vmdq_pools - 1; + +#ifdef HAVE_TX_MQ + if (adapter->vmdq_pools) + adapter->num_tx_queues = adapter->vmdq_pools; + else + adapter->num_tx_queues = adapter->num_rx_queues; +#else + adapter->num_tx_queues = max_t(u32, 1, adapter->vmdq_pools); +#endif + + switch (adapter->int_mode) { + case IGB_INT_MODE_MSIX: + /* start with one vector for every rx queue */ + numvecs = adapter->num_rx_queues; + + /* if tx handler is separate add 1 for every tx queue */ + if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) + numvecs += adapter->num_tx_queues; + + /* store the number of vectors reserved for queues */ + adapter->num_q_vectors = numvecs; + + /* add 1 vector for link status interrupts */ + numvecs++; + adapter->msix_entries = kcalloc(numvecs, + sizeof(struct msix_entry), + GFP_KERNEL); + if (adapter->msix_entries) { + for (i = 0; i < numvecs; i++) + adapter->msix_entries[i].entry = i; + +#ifdef HAVE_PCI_ENABLE_MSIX + err = pci_enable_msix(pdev, + adapter->msix_entries, numvecs); +#else + err = pci_enable_msix_range(pdev, + adapter->msix_entries, + numvecs, + numvecs); +#endif + if (err == 0) + break; + } + /* MSI-X failed, so fall through and try MSI */ + dev_warn(pci_dev_to_dev(pdev), "Failed to initialize MSI-X interrupts. " + "Falling back to MSI interrupts.\n"); + igb_reset_interrupt_capability(adapter); + case IGB_INT_MODE_MSI: + if (!pci_enable_msi(pdev)) + adapter->flags |= IGB_FLAG_HAS_MSI; + else + dev_warn(pci_dev_to_dev(pdev), "Failed to initialize MSI " + "interrupts. Falling back to legacy " + "interrupts.\n"); + /* Fall through */ + case IGB_INT_MODE_LEGACY: + /* disable advanced features and set number of queues to 1 */ + igb_reset_sriov_capability(adapter); + adapter->vmdq_pools = 0; + adapter->rss_queues = 1; + adapter->flags |= IGB_FLAG_QUEUE_PAIRS; + adapter->num_rx_queues = 1; + adapter->num_tx_queues = 1; + adapter->num_q_vectors = 1; + /* Don't do anything; this is system default */ + break; + } +} + +static void igb_add_ring(struct igb_ring *ring, + struct igb_ring_container *head) +{ + head->ring = ring; + head->count++; +} + +/** + * igb_alloc_q_vector - Allocate memory for a single interrupt vector + * @adapter: board private structure to initialize + * @v_count: q_vectors allocated on adapter, used for ring interleaving + * @v_idx: index of vector in adapter struct + * @txr_count: total number of Tx rings to allocate + * @txr_idx: index of first Tx ring to allocate + * @rxr_count: total number of Rx rings to allocate + * @rxr_idx: index of first Rx ring to allocate + * + * We allocate one q_vector. If allocation fails we return -ENOMEM. + **/ +static int igb_alloc_q_vector(struct igb_adapter *adapter, + unsigned int v_count, unsigned int v_idx, + unsigned int txr_count, unsigned int txr_idx, + unsigned int rxr_count, unsigned int rxr_idx) +{ + struct igb_q_vector *q_vector; + struct igb_ring *ring; + int ring_count, size; + + /* igb only supports 1 Tx and/or 1 Rx queue per vector */ + if (txr_count > 1 || rxr_count > 1) + return -ENOMEM; + + ring_count = txr_count + rxr_count; + size = sizeof(struct igb_q_vector) + + (sizeof(struct igb_ring) * ring_count); + + /* allocate q_vector and rings */ + q_vector = kzalloc(size, GFP_KERNEL); + if (!q_vector) + return -ENOMEM; + +#ifndef IGB_NO_LRO + /* initialize LRO */ + __skb_queue_head_init(&q_vector->lrolist.active); + +#endif + /* initialize NAPI */ + netif_napi_add(adapter->netdev, &q_vector->napi, + igb_poll, 64); + + /* tie q_vector and adapter together */ + adapter->q_vector[v_idx] = q_vector; + q_vector->adapter = adapter; + + /* initialize work limits */ + q_vector->tx.work_limit = adapter->tx_work_limit; + + /* initialize ITR configuration */ + q_vector->itr_register = adapter->hw.hw_addr + E1000_EITR(0); + q_vector->itr_val = IGB_START_ITR; + + /* initialize pointer to rings */ + ring = q_vector->ring; + + /* initialize ITR */ + if (rxr_count) { + /* rx or rx/tx vector */ + if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3) + q_vector->itr_val = adapter->rx_itr_setting; + } else { + /* tx only vector */ + if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3) + q_vector->itr_val = adapter->tx_itr_setting; + } + + if (txr_count) { + /* assign generic ring traits */ + ring->dev = &adapter->pdev->dev; + ring->netdev = adapter->netdev; + + /* configure backlink on ring */ + ring->q_vector = q_vector; + + /* update q_vector Tx values */ + igb_add_ring(ring, &q_vector->tx); + + /* For 82575, context index must be unique per ring. */ + if (adapter->hw.mac.type == e1000_82575) + set_bit(IGB_RING_FLAG_TX_CTX_IDX, &ring->flags); + + /* apply Tx specific ring traits */ + ring->count = adapter->tx_ring_count; + ring->queue_index = txr_idx; + + /* assign ring to adapter */ + adapter->tx_ring[txr_idx] = ring; + + /* push pointer to next ring */ + ring++; + } + + if (rxr_count) { + /* assign generic ring traits */ + ring->dev = &adapter->pdev->dev; + ring->netdev = adapter->netdev; + + /* configure backlink on ring */ + ring->q_vector = q_vector; + + /* update q_vector Rx values */ + igb_add_ring(ring, &q_vector->rx); + +#ifndef HAVE_NDO_SET_FEATURES + /* enable rx checksum */ + set_bit(IGB_RING_FLAG_RX_CSUM, &ring->flags); + +#endif + /* set flag indicating ring supports SCTP checksum offload */ + if (adapter->hw.mac.type >= e1000_82576) + set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags); + + if ((adapter->hw.mac.type == e1000_i350) || + (adapter->hw.mac.type == e1000_i354)) + set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags); + + /* apply Rx specific ring traits */ + ring->count = adapter->rx_ring_count; + ring->queue_index = rxr_idx; + + /* assign ring to adapter */ + adapter->rx_ring[rxr_idx] = ring; + } + + return 0; +} + +/** + * igb_alloc_q_vectors - Allocate memory for interrupt vectors + * @adapter: board private structure to initialize + * + * We allocate one q_vector per queue interrupt. If allocation fails we + * return -ENOMEM. + **/ +static int igb_alloc_q_vectors(struct igb_adapter *adapter) +{ + int q_vectors = adapter->num_q_vectors; + int rxr_remaining = adapter->num_rx_queues; + int txr_remaining = adapter->num_tx_queues; + int rxr_idx = 0, txr_idx = 0, v_idx = 0; + int err; + + if (q_vectors >= (rxr_remaining + txr_remaining)) { + for (; rxr_remaining; v_idx++) { + err = igb_alloc_q_vector(adapter, q_vectors, v_idx, + 0, 0, 1, rxr_idx); + + if (err) + goto err_out; + + /* update counts and index */ + rxr_remaining--; + rxr_idx++; + } + } + + for (; v_idx < q_vectors; v_idx++) { + int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx); + int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx); + err = igb_alloc_q_vector(adapter, q_vectors, v_idx, + tqpv, txr_idx, rqpv, rxr_idx); + + if (err) + goto err_out; + + /* update counts and index */ + rxr_remaining -= rqpv; + txr_remaining -= tqpv; + rxr_idx++; + txr_idx++; + } + + return 0; + +err_out: + adapter->num_tx_queues = 0; + adapter->num_rx_queues = 0; + adapter->num_q_vectors = 0; + + while (v_idx--) + igb_free_q_vector(adapter, v_idx); + + return -ENOMEM; +} + +/** + * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors + * + * This function initializes the interrupts and allocates all of the queues. + **/ +static int igb_init_interrupt_scheme(struct igb_adapter *adapter, bool msix) +{ + struct pci_dev *pdev = adapter->pdev; + int err; + + igb_set_interrupt_capability(adapter, msix); + + err = igb_alloc_q_vectors(adapter); + if (err) { + dev_err(pci_dev_to_dev(pdev), "Unable to allocate memory for vectors\n"); + goto err_alloc_q_vectors; + } + + igb_cache_ring_register(adapter); + + return 0; + +err_alloc_q_vectors: + igb_reset_interrupt_capability(adapter); + return err; +} + +/** + * igb_request_irq - initialize interrupts + * + * Attempts to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +static int igb_request_irq(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + int err = 0; + + if (adapter->msix_entries) { + err = igb_request_msix(adapter); + if (!err) + goto request_done; + /* fall back to MSI */ + igb_free_all_tx_resources(adapter); + igb_free_all_rx_resources(adapter); + + igb_clear_interrupt_scheme(adapter); + igb_reset_sriov_capability(adapter); + err = igb_init_interrupt_scheme(adapter, false); + if (err) + goto request_done; + igb_setup_all_tx_resources(adapter); + igb_setup_all_rx_resources(adapter); + igb_configure(adapter); + } + + igb_assign_vector(adapter->q_vector[0], 0); + + if (adapter->flags & IGB_FLAG_HAS_MSI) { + err = request_irq(pdev->irq, &igb_intr_msi, 0, + netdev->name, adapter); + if (!err) + goto request_done; + + /* fall back to legacy interrupts */ + igb_reset_interrupt_capability(adapter); + adapter->flags &= ~IGB_FLAG_HAS_MSI; + } + + err = request_irq(pdev->irq, &igb_intr, IRQF_SHARED, + netdev->name, adapter); + + if (err) + dev_err(pci_dev_to_dev(pdev), "Error %d getting interrupt\n", + err); + +request_done: + return err; +} + +static void igb_free_irq(struct igb_adapter *adapter) +{ + if (adapter->msix_entries) { + int vector = 0, i; + + free_irq(adapter->msix_entries[vector++].vector, adapter); + + for (i = 0; i < adapter->num_q_vectors; i++) + free_irq(adapter->msix_entries[vector++].vector, + adapter->q_vector[i]); + } else { + free_irq(adapter->pdev->irq, adapter); + } +} + +/** + * igb_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + **/ +static void igb_irq_disable(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + /* + * we need to be careful when disabling interrupts. The VFs are also + * mapped into these registers and so clearing the bits can cause + * issues on the VF drivers so we only need to clear what we set + */ + if (adapter->msix_entries) { + u32 regval = E1000_READ_REG(hw, E1000_EIAM); + E1000_WRITE_REG(hw, E1000_EIAM, regval & ~adapter->eims_enable_mask); + E1000_WRITE_REG(hw, E1000_EIMC, adapter->eims_enable_mask); + regval = E1000_READ_REG(hw, E1000_EIAC); + E1000_WRITE_REG(hw, E1000_EIAC, regval & ~adapter->eims_enable_mask); + } + + E1000_WRITE_REG(hw, E1000_IAM, 0); + E1000_WRITE_REG(hw, E1000_IMC, ~0); + E1000_WRITE_FLUSH(hw); + + if (adapter->msix_entries) { + int vector = 0, i; + + synchronize_irq(adapter->msix_entries[vector++].vector); + + for (i = 0; i < adapter->num_q_vectors; i++) + synchronize_irq(adapter->msix_entries[vector++].vector); + } else { + synchronize_irq(adapter->pdev->irq); + } +} + +/** + * igb_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + **/ +static void igb_irq_enable(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + + if (adapter->msix_entries) { + u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_DRSTA; + u32 regval = E1000_READ_REG(hw, E1000_EIAC); + E1000_WRITE_REG(hw, E1000_EIAC, regval | adapter->eims_enable_mask); + regval = E1000_READ_REG(hw, E1000_EIAM); + E1000_WRITE_REG(hw, E1000_EIAM, regval | adapter->eims_enable_mask); + E1000_WRITE_REG(hw, E1000_EIMS, adapter->eims_enable_mask); + if (adapter->vfs_allocated_count) { + E1000_WRITE_REG(hw, E1000_MBVFIMR, 0xFF); + ims |= E1000_IMS_VMMB; + if (adapter->mdd) + if ((adapter->hw.mac.type == e1000_i350) || + (adapter->hw.mac.type == e1000_i354)) + ims |= E1000_IMS_MDDET; + } + E1000_WRITE_REG(hw, E1000_IMS, ims); + } else { + E1000_WRITE_REG(hw, E1000_IMS, IMS_ENABLE_MASK | + E1000_IMS_DRSTA); + E1000_WRITE_REG(hw, E1000_IAM, IMS_ENABLE_MASK | + E1000_IMS_DRSTA); + } +} + +static void igb_update_mng_vlan(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u16 vid = adapter->hw.mng_cookie.vlan_id; + u16 old_vid = adapter->mng_vlan_id; + + if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { + /* add VID to filter table */ + igb_vfta_set(adapter, vid, TRUE); + adapter->mng_vlan_id = vid; + } else { + adapter->mng_vlan_id = IGB_MNG_VLAN_NONE; + } + + if ((old_vid != (u16)IGB_MNG_VLAN_NONE) && + (vid != old_vid) && +#ifdef HAVE_VLAN_RX_REGISTER + !vlan_group_get_device(adapter->vlgrp, old_vid)) { +#else + !test_bit(old_vid, adapter->active_vlans)) { +#endif + /* remove VID from filter table */ + igb_vfta_set(adapter, old_vid, FALSE); + } +} + +/** + * igb_release_hw_control - release control of the h/w to f/w + * @adapter: address of board private structure + * + * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit. + * For ASF and Pass Through versions of f/w this means that the + * driver is no longer loaded. + * + **/ +static void igb_release_hw_control(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_ext; + + /* Let firmware take over control of h/w */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + E1000_WRITE_REG(hw, E1000_CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); +} + +/** + * igb_get_hw_control - get control of the h/w from f/w + * @adapter: address of board private structure + * + * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit. + * For ASF and Pass Through versions of f/w this means that + * the driver is loaded. + * + **/ +static void igb_get_hw_control(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_ext; + + /* Let firmware know the driver has taken over */ + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + E1000_WRITE_REG(hw, E1000_CTRL_EXT, + ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); +} + +/** + * igb_configure - configure the hardware for RX and TX + * @adapter: private board structure + **/ +static void igb_configure(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int i; + + igb_get_hw_control(adapter); + igb_set_rx_mode(netdev); + + igb_restore_vlan(adapter); + + igb_setup_tctl(adapter); + igb_setup_mrqc(adapter); + igb_setup_rctl(adapter); + + igb_configure_tx(adapter); + igb_configure_rx(adapter); + + e1000_rx_fifo_flush_82575(&adapter->hw); +#ifdef CONFIG_NETDEVICES_MULTIQUEUE + if (adapter->num_tx_queues > 1) + netdev->features |= NETIF_F_MULTI_QUEUE; + else + netdev->features &= ~NETIF_F_MULTI_QUEUE; +#endif + + /* call igb_desc_unused which always leaves + * at least 1 descriptor unused to make sure + * next_to_use != next_to_clean */ + for (i = 0; i < adapter->num_rx_queues; i++) { + struct igb_ring *ring = adapter->rx_ring[i]; + igb_alloc_rx_buffers(ring, igb_desc_unused(ring)); + } +} + +/** + * igb_power_up_link - Power up the phy/serdes link + * @adapter: address of board private structure + **/ +void igb_power_up_link(struct igb_adapter *adapter) +{ + e1000_phy_hw_reset(&adapter->hw); + + if (adapter->hw.phy.media_type == e1000_media_type_copper) + e1000_power_up_phy(&adapter->hw); + else + e1000_power_up_fiber_serdes_link(&adapter->hw); +} + +/** + * igb_power_down_link - Power down the phy/serdes link + * @adapter: address of board private structure + */ +static void igb_power_down_link(struct igb_adapter *adapter) +{ + if (adapter->hw.phy.media_type == e1000_media_type_copper) + e1000_power_down_phy(&adapter->hw); + else + e1000_shutdown_fiber_serdes_link(&adapter->hw); +} + +/* Detect and switch function for Media Auto Sense */ +static void igb_check_swap_media(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_ext, connsw; + bool swap_now = false; + bool link; + + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + connsw = E1000_READ_REG(hw, E1000_CONNSW); + link = igb_has_link(adapter); + (void) link; + + /* need to live swap if current media is copper and we have fiber/serdes + * to go to. + */ + + if ((hw->phy.media_type == e1000_media_type_copper) && + (!(connsw & E1000_CONNSW_AUTOSENSE_EN))) { + swap_now = true; + } else if (!(connsw & E1000_CONNSW_SERDESD)) { + /* copper signal takes time to appear */ + if (adapter->copper_tries < 2) { + adapter->copper_tries++; + connsw |= E1000_CONNSW_AUTOSENSE_CONF; + E1000_WRITE_REG(hw, E1000_CONNSW, connsw); + return; + } else { + adapter->copper_tries = 0; + if ((connsw & E1000_CONNSW_PHYSD) && + (!(connsw & E1000_CONNSW_PHY_PDN))) { + swap_now = true; + connsw &= ~E1000_CONNSW_AUTOSENSE_CONF; + E1000_WRITE_REG(hw, E1000_CONNSW, connsw); + } + } + } + + if (swap_now) { + switch (hw->phy.media_type) { + case e1000_media_type_copper: + dev_info(pci_dev_to_dev(adapter->pdev), + "%s:MAS: changing media to fiber/serdes\n", + adapter->netdev->name); + ctrl_ext |= + E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; + adapter->flags |= IGB_FLAG_MEDIA_RESET; + adapter->copper_tries = 0; + break; + case e1000_media_type_internal_serdes: + case e1000_media_type_fiber: + dev_info(pci_dev_to_dev(adapter->pdev), + "%s:MAS: changing media to copper\n", + adapter->netdev->name); + ctrl_ext &= + ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; + adapter->flags |= IGB_FLAG_MEDIA_RESET; + break; + default: + /* shouldn't get here during regular operation */ + dev_err(pci_dev_to_dev(adapter->pdev), + "%s:AMS: Invalid media type found, returning\n", + adapter->netdev->name); + break; + } + E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); + } +} + +#ifdef HAVE_I2C_SUPPORT +/* igb_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Returns the I2C data bit value + */ +static int igb_get_i2c_data(void *data) +{ + struct igb_adapter *adapter = data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + return (i2cctl & E1000_I2C_DATA_IN) != 0; +} + +/* igb_set_i2c_data - Sets the I2C data bit + * @data: pointer to hardware structure + * @state: I2C data value (0 or 1) to set + * + * Sets the I2C data bit + */ +static void igb_set_i2c_data(void *data, int state) +{ + struct igb_adapter *adapter = data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + if (state) + i2cctl |= E1000_I2C_DATA_OUT; + else + i2cctl &= ~E1000_I2C_DATA_OUT; + + i2cctl &= ~E1000_I2C_DATA_OE_N; + i2cctl |= E1000_I2C_CLK_OE_N; + + E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); + E1000_WRITE_FLUSH(hw); + +} + +/* igb_set_i2c_clk - Sets the I2C SCL clock + * @data: pointer to hardware structure + * @state: state to set clock + * + * Sets the I2C clock line to state + */ +static void igb_set_i2c_clk(void *data, int state) +{ + struct igb_adapter *adapter = data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + if (state) { + i2cctl |= E1000_I2C_CLK_OUT; + i2cctl &= ~E1000_I2C_CLK_OE_N; + } else { + i2cctl &= ~E1000_I2C_CLK_OUT; + i2cctl &= ~E1000_I2C_CLK_OE_N; + } + E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); + E1000_WRITE_FLUSH(hw); +} + +/* igb_get_i2c_clk - Gets the I2C SCL clock state + * @data: pointer to hardware structure + * + * Gets the I2C clock state + */ +static int igb_get_i2c_clk(void *data) +{ + struct igb_adapter *adapter = data; + struct e1000_hw *hw = &adapter->hw; + s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); + + return (i2cctl & E1000_I2C_CLK_IN) != 0; +} + +static const struct i2c_algo_bit_data igb_i2c_algo = { + .setsda = igb_set_i2c_data, + .setscl = igb_set_i2c_clk, + .getsda = igb_get_i2c_data, + .getscl = igb_get_i2c_clk, + .udelay = 5, + .timeout = 20, +}; + +/* igb_init_i2c - Init I2C interface + * @adapter: pointer to adapter structure + * + */ +static s32 igb_init_i2c(struct igb_adapter *adapter) +{ + s32 status = E1000_SUCCESS; + + /* I2C interface supported on i350 devices */ + if (adapter->hw.mac.type != e1000_i350) + return E1000_SUCCESS; + + /* Initialize the i2c bus which is controlled by the registers. + * This bus will use the i2c_algo_bit structue that implements + * the protocol through toggling of the 4 bits in the register. + */ + adapter->i2c_adap.owner = THIS_MODULE; + adapter->i2c_algo = igb_i2c_algo; + adapter->i2c_algo.data = adapter; + adapter->i2c_adap.algo_data = &adapter->i2c_algo; + adapter->i2c_adap.dev.parent = &adapter->pdev->dev; + strlcpy(adapter->i2c_adap.name, "igb BB", + sizeof(adapter->i2c_adap.name)); + status = i2c_bit_add_bus(&adapter->i2c_adap); + return status; +} + +#endif /* HAVE_I2C_SUPPORT */ +/** + * igb_up - Open the interface and prepare it to handle traffic + * @adapter: board private structure + **/ +int igb_up(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + + /* hardware has been reset, we need to reload some things */ + igb_configure(adapter); + + clear_bit(__IGB_DOWN, &adapter->state); + + for (i = 0; i < adapter->num_q_vectors; i++) + napi_enable(&(adapter->q_vector[i]->napi)); + + if (adapter->msix_entries) + igb_configure_msix(adapter); + else + igb_assign_vector(adapter->q_vector[0], 0); + + igb_configure_lli(adapter); + + /* Clear any pending interrupts. */ + E1000_READ_REG(hw, E1000_ICR); + igb_irq_enable(adapter); + + /* notify VFs that reset has been completed */ + if (adapter->vfs_allocated_count) { + u32 reg_data = E1000_READ_REG(hw, E1000_CTRL_EXT); + reg_data |= E1000_CTRL_EXT_PFRSTD; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg_data); + } + + netif_tx_start_all_queues(adapter->netdev); + + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + schedule_work(&adapter->dma_err_task); + /* start the watchdog. */ + hw->mac.get_link_status = 1; + schedule_work(&adapter->watchdog_task); + + if ((adapter->flags & IGB_FLAG_EEE) && + (!hw->dev_spec._82575.eee_disable)) + adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T; + + return 0; +} + +void igb_down(struct igb_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + u32 tctl, rctl; + int i; + + /* signal that we're down so the interrupt handler does not + * reschedule our watchdog timer */ + set_bit(__IGB_DOWN, &adapter->state); + + /* disable receives in the hardware */ + rctl = E1000_READ_REG(hw, E1000_RCTL); + E1000_WRITE_REG(hw, E1000_RCTL, rctl & ~E1000_RCTL_EN); + /* flush and sleep below */ + + netif_tx_stop_all_queues(netdev); + + /* disable transmits in the hardware */ + tctl = E1000_READ_REG(hw, E1000_TCTL); + tctl &= ~E1000_TCTL_EN; + E1000_WRITE_REG(hw, E1000_TCTL, tctl); + /* flush both disables and wait for them to finish */ + E1000_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + for (i = 0; i < adapter->num_q_vectors; i++) + napi_disable(&(adapter->q_vector[i]->napi)); + + igb_irq_disable(adapter); + + adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; + + del_timer_sync(&adapter->watchdog_timer); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + del_timer_sync(&adapter->dma_err_timer); + del_timer_sync(&adapter->phy_info_timer); + + netif_carrier_off(netdev); + + /* record the stats before reset*/ + igb_update_stats(adapter); + + adapter->link_speed = 0; + adapter->link_duplex = 0; + +#ifdef HAVE_PCI_ERS + if (!pci_channel_offline(adapter->pdev)) + igb_reset(adapter); +#else + igb_reset(adapter); +#endif + igb_clean_all_tx_rings(adapter); + igb_clean_all_rx_rings(adapter); +#ifdef IGB_DCA + /* since we reset the hardware DCA settings were cleared */ + igb_setup_dca(adapter); +#endif +} + +void igb_reinit_locked(struct igb_adapter *adapter) +{ + WARN_ON(in_interrupt()); + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + igb_down(adapter); + igb_up(adapter); + clear_bit(__IGB_RESETTING, &adapter->state); +} + +/** + * igb_enable_mas - Media Autosense re-enable after swap + * + * @adapter: adapter struct + **/ +static s32 igb_enable_mas(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 connsw; + s32 ret_val = E1000_SUCCESS; + + connsw = E1000_READ_REG(hw, E1000_CONNSW); + if (hw->phy.media_type == e1000_media_type_copper) { + /* configure for SerDes media detect */ + if (!(connsw & E1000_CONNSW_SERDESD)) { + connsw |= E1000_CONNSW_ENRGSRC; + connsw |= E1000_CONNSW_AUTOSENSE_EN; + E1000_WRITE_REG(hw, E1000_CONNSW, connsw); + E1000_WRITE_FLUSH(hw); + } else if (connsw & E1000_CONNSW_SERDESD) { + /* already SerDes, no need to enable anything */ + return ret_val; + } else { + dev_info(pci_dev_to_dev(adapter->pdev), + "%s:MAS: Unable to configure feature, disabling..\n", + adapter->netdev->name); + adapter->flags &= ~IGB_FLAG_MAS_ENABLE; + } + } + return ret_val; +} + +void igb_reset(struct igb_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct e1000_hw *hw = &adapter->hw; + struct e1000_mac_info *mac = &hw->mac; + struct e1000_fc_info *fc = &hw->fc; + u32 pba = 0, tx_space, min_tx_space, min_rx_space, hwm; + + /* Repartition Pba for greater than 9k mtu + * To take effect CTRL.RST is required. + */ + switch (mac->type) { + case e1000_i350: + case e1000_82580: + case e1000_i354: + pba = E1000_READ_REG(hw, E1000_RXPBS); + pba = e1000_rxpbs_adjust_82580(pba); + break; + case e1000_82576: + pba = E1000_READ_REG(hw, E1000_RXPBS); + pba &= E1000_RXPBS_SIZE_MASK_82576; + break; + case e1000_82575: + case e1000_i210: + case e1000_i211: + default: + pba = E1000_PBA_34K; + break; + } + + if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) && + (mac->type < e1000_82576)) { + /* adjust PBA for jumbo frames */ + E1000_WRITE_REG(hw, E1000_PBA, pba); + + /* To maintain wire speed transmits, the Tx FIFO should be + * large enough to accommodate two full transmit packets, + * rounded up to the next 1KB and expressed in KB. Likewise, + * the Rx FIFO should be large enough to accommodate at least + * one full receive packet and is similarly rounded up and + * expressed in KB. */ + pba = E1000_READ_REG(hw, E1000_PBA); + /* upper 16 bits has Tx packet buffer allocation size in KB */ + tx_space = pba >> 16; + /* lower 16 bits has Rx packet buffer allocation size in KB */ + pba &= 0xffff; + /* the tx fifo also stores 16 bytes of information about the tx + * but don't include ethernet FCS because hardware appends it */ + min_tx_space = (adapter->max_frame_size + + sizeof(union e1000_adv_tx_desc) - + ETH_FCS_LEN) * 2; + min_tx_space = ALIGN(min_tx_space, 1024); + min_tx_space >>= 10; + /* software strips receive CRC, so leave room for it */ + min_rx_space = adapter->max_frame_size; + min_rx_space = ALIGN(min_rx_space, 1024); + min_rx_space >>= 10; + + /* If current Tx allocation is less than the min Tx FIFO size, + * and the min Tx FIFO size is less than the current Rx FIFO + * allocation, take space away from current Rx allocation */ + if (tx_space < min_tx_space && + ((min_tx_space - tx_space) < pba)) { + pba = pba - (min_tx_space - tx_space); + + /* if short on rx space, rx wins and must trump tx + * adjustment */ + if (pba < min_rx_space) + pba = min_rx_space; + } + E1000_WRITE_REG(hw, E1000_PBA, pba); + } + + /* flow control settings */ + /* The high water mark must be low enough to fit one full frame + * (or the size used for early receive) above it in the Rx FIFO. + * Set it to the lower of: + * - 90% of the Rx FIFO size, or + * - the full Rx FIFO size minus one full frame */ + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - 2 * adapter->max_frame_size)); + + fc->high_water = hwm & 0xFFFFFFF0; /* 16-byte granularity */ + fc->low_water = fc->high_water - 16; + fc->pause_time = 0xFFFF; + fc->send_xon = 1; + fc->current_mode = fc->requested_mode; + + /* disable receive for all VFs and wait one second */ + if (adapter->vfs_allocated_count) { + int i; + /* + * Clear all flags except indication that the PF has set + * the VF MAC addresses administratively + */ + for (i = 0 ; i < adapter->vfs_allocated_count; i++) + adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC; + + /* ping all the active vfs to let them know we are going down */ + igb_ping_all_vfs(adapter); + + /* disable transmits and receives */ + E1000_WRITE_REG(hw, E1000_VFRE, 0); + E1000_WRITE_REG(hw, E1000_VFTE, 0); + } + + /* Allow time for pending master requests to run */ + e1000_reset_hw(hw); + E1000_WRITE_REG(hw, E1000_WUC, 0); + + if (adapter->flags & IGB_FLAG_MEDIA_RESET) { + e1000_setup_init_funcs(hw, TRUE); + igb_check_options(adapter); + e1000_get_bus_info(hw); + adapter->flags &= ~IGB_FLAG_MEDIA_RESET; + } + if (adapter->flags & IGB_FLAG_MAS_ENABLE) { + if (igb_enable_mas(adapter)) + dev_err(pci_dev_to_dev(pdev), + "Error enabling Media Auto Sense\n"); + } + if (e1000_init_hw(hw)) + dev_err(pci_dev_to_dev(pdev), "Hardware Error\n"); + + /* + * Flow control settings reset on hardware reset, so guarantee flow + * control is off when forcing speed. + */ + if (!hw->mac.autoneg) + e1000_force_mac_fc(hw); + + igb_init_dmac(adapter, pba); + /* Re-initialize the thermal sensor on i350 devices. */ + if (mac->type == e1000_i350 && hw->bus.func == 0) { + /* + * If present, re-initialize the external thermal sensor + * interface. + */ + if (adapter->ets) + e1000_set_i2c_bb(hw); + e1000_init_thermal_sensor_thresh(hw); + } + + /*Re-establish EEE setting */ + if (hw->phy.media_type == e1000_media_type_copper) { + switch (mac->type) { + case e1000_i350: + case e1000_i210: + case e1000_i211: + e1000_set_eee_i350(hw); + break; + case e1000_i354: + e1000_set_eee_i354(hw); + break; + default: + break; + } + } + + if (!netif_running(adapter->netdev)) + igb_power_down_link(adapter); + + igb_update_mng_vlan(adapter); + + /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ + E1000_WRITE_REG(hw, E1000_VET, ETHERNET_IEEE_VLAN_TYPE); + + +#ifdef HAVE_PTP_1588_CLOCK + /* Re-enable PTP, where applicable. */ + igb_ptp_reset(adapter); +#endif /* HAVE_PTP_1588_CLOCK */ + + e1000_get_phy_info(hw); + + adapter->devrc++; +} + +#ifdef HAVE_NDO_SET_FEATURES +static kni_netdev_features_t igb_fix_features(struct net_device *netdev, + kni_netdev_features_t features) +{ + /* + * Since there is no support for separate tx vlan accel + * enabled make sure tx flag is cleared if rx is. + */ +#ifdef NETIF_F_HW_VLAN_CTAG_RX + if (!(features & NETIF_F_HW_VLAN_CTAG_RX)) + features &= ~NETIF_F_HW_VLAN_CTAG_TX; +#else + if (!(features & NETIF_F_HW_VLAN_RX)) + features &= ~NETIF_F_HW_VLAN_TX; +#endif + + /* If Rx checksum is disabled, then LRO should also be disabled */ + if (!(features & NETIF_F_RXCSUM)) + features &= ~NETIF_F_LRO; + + return features; +} + +static int igb_set_features(struct net_device *netdev, + kni_netdev_features_t features) +{ + u32 changed = netdev->features ^ features; + +#ifdef NETIF_F_HW_VLAN_CTAG_RX + if (changed & NETIF_F_HW_VLAN_CTAG_RX) +#else + if (changed & NETIF_F_HW_VLAN_RX) +#endif + igb_vlan_mode(netdev, features); + + return 0; +} + +#ifdef NTF_SELF +#ifdef USE_CONST_DEV_UC_CHAR +static int igb_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], + struct net_device *dev, + const unsigned char *addr, +#ifdef HAVE_NDO_FDB_ADD_VID + u16 vid, +#endif + u16 flags) +#else +static int igb_ndo_fdb_add(struct ndmsg *ndm, + struct net_device *dev, + unsigned char *addr, + u16 flags) +#endif +{ + struct igb_adapter *adapter = netdev_priv(dev); + struct e1000_hw *hw = &adapter->hw; + int err; + + if (!(adapter->vfs_allocated_count)) + return -EOPNOTSUPP; + + /* Hardware does not support aging addresses so if a + * ndm_state is given only allow permanent addresses + */ + if (ndm->ndm_state && !(ndm->ndm_state & NUD_PERMANENT)) { + pr_info("%s: FDB only supports static addresses\n", + igb_driver_name); + return -EINVAL; + } + + if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr)) { + u32 rar_uc_entries = hw->mac.rar_entry_count - + (adapter->vfs_allocated_count + 1); + + if (netdev_uc_count(dev) < rar_uc_entries) + err = dev_uc_add_excl(dev, addr); + else + err = -ENOMEM; + } else if (is_multicast_ether_addr(addr)) { + err = dev_mc_add_excl(dev, addr); + } else { + err = -EINVAL; + } + + /* Only return duplicate errors if NLM_F_EXCL is set */ + if (err == -EEXIST && !(flags & NLM_F_EXCL)) + err = 0; + + return err; +} + +#ifndef USE_DEFAULT_FDB_DEL_DUMP +#ifdef USE_CONST_DEV_UC_CHAR +static int igb_ndo_fdb_del(struct ndmsg *ndm, + struct net_device *dev, + const unsigned char *addr) +#else +static int igb_ndo_fdb_del(struct ndmsg *ndm, + struct net_device *dev, + unsigned char *addr) +#endif +{ + struct igb_adapter *adapter = netdev_priv(dev); + int err = -EOPNOTSUPP; + + if (ndm->ndm_state & NUD_PERMANENT) { + pr_info("%s: FDB only supports static addresses\n", + igb_driver_name); + return -EINVAL; + } + + if (adapter->vfs_allocated_count) { + if (is_unicast_ether_addr(addr)) + err = dev_uc_del(dev, addr); + else if (is_multicast_ether_addr(addr)) + err = dev_mc_del(dev, addr); + else + err = -EINVAL; + } + + return err; +} + +static int igb_ndo_fdb_dump(struct sk_buff *skb, + struct netlink_callback *cb, + struct net_device *dev, + int idx) +{ + struct igb_adapter *adapter = netdev_priv(dev); + + if (adapter->vfs_allocated_count) + idx = ndo_dflt_fdb_dump(skb, cb, dev, idx); + + return idx; +} +#endif /* USE_DEFAULT_FDB_DEL_DUMP */ + +#ifdef HAVE_BRIDGE_ATTRIBS +#ifdef HAVE_NDO_BRIDGE_SET_DEL_LINK_FLAGS +static int igb_ndo_bridge_setlink(struct net_device *dev, + struct nlmsghdr *nlh, + u16 flags) +#else +static int igb_ndo_bridge_setlink(struct net_device *dev, + struct nlmsghdr *nlh) +#endif /* HAVE_NDO_BRIDGE_SET_DEL_LINK_FLAGS */ +{ + struct igb_adapter *adapter = netdev_priv(dev); + struct e1000_hw *hw = &adapter->hw; + struct nlattr *attr, *br_spec; + int rem; + + if (!(adapter->vfs_allocated_count)) + return -EOPNOTSUPP; + + switch (adapter->hw.mac.type) { + case e1000_82576: + case e1000_i350: + case e1000_i354: + break; + default: + return -EOPNOTSUPP; + } + + br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); + + nla_for_each_nested(attr, br_spec, rem) { + __u16 mode; + + if (nla_type(attr) != IFLA_BRIDGE_MODE) + continue; + + mode = nla_get_u16(attr); + if (mode == BRIDGE_MODE_VEPA) { + e1000_vmdq_set_loopback_pf(hw, 0); + adapter->flags &= ~IGB_FLAG_LOOPBACK_ENABLE; + } else if (mode == BRIDGE_MODE_VEB) { + e1000_vmdq_set_loopback_pf(hw, 1); + adapter->flags |= IGB_FLAG_LOOPBACK_ENABLE; + } else + return -EINVAL; + + netdev_info(adapter->netdev, "enabling bridge mode: %s\n", + mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); + } + + return 0; +} + +#ifdef HAVE_BRIDGE_FILTER +#ifdef HAVE_NDO_BRIDGE_GETLINK_NLFLAGS +static int igb_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, + struct net_device *dev, u32 filter_mask, + int nlflags) +#else +static int igb_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, + struct net_device *dev, u32 filter_mask) +#endif /* HAVE_NDO_BRIDGE_GETLINK_NLFLAGS */ +#else +static int igb_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, + struct net_device *dev) +#endif +{ + struct igb_adapter *adapter = netdev_priv(dev); + u16 mode; + + if (!(adapter->vfs_allocated_count)) + return -EOPNOTSUPP; + + if (adapter->flags & IGB_FLAG_LOOPBACK_ENABLE) + mode = BRIDGE_MODE_VEB; + else + mode = BRIDGE_MODE_VEPA; + +#ifdef HAVE_NDO_DFLT_BRIDGE_ADD_MASK +#ifdef HAVE_NDO_BRIDGE_GETLINK_NLFLAGS +#ifdef HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL + return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0, + nlflags, filter_mask, NULL); +#else + return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0, nlflags); +#endif /* HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL */ +#else + return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0); +#endif /* HAVE_NDO_BRIDGE_GETLINK_NLFLAGS */ +#else + return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode); +#endif /* HAVE_NDO_DFLT_BRIDGE_ADD_MASK */ +} +#endif /* HAVE_BRIDGE_ATTRIBS */ +#endif /* NTF_SELF */ + +#endif /* HAVE_NDO_SET_FEATURES */ +#ifdef HAVE_NET_DEVICE_OPS +static const struct net_device_ops igb_netdev_ops = { + .ndo_open = igb_open, + .ndo_stop = igb_close, + .ndo_start_xmit = igb_xmit_frame, + .ndo_get_stats = igb_get_stats, + .ndo_set_rx_mode = igb_set_rx_mode, + .ndo_set_mac_address = igb_set_mac, + .ndo_change_mtu = igb_change_mtu, + .ndo_do_ioctl = igb_ioctl, + .ndo_tx_timeout = igb_tx_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_vlan_rx_add_vid = igb_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = igb_vlan_rx_kill_vid, +#ifdef IFLA_VF_MAX + .ndo_set_vf_mac = igb_ndo_set_vf_mac, + .ndo_set_vf_vlan = igb_ndo_set_vf_vlan, +#ifdef HAVE_VF_MIN_MAX_TXRATE + .ndo_set_vf_rate = igb_ndo_set_vf_bw, +#else /* HAVE_VF_MIN_MAX_TXRATE */ + .ndo_set_vf_tx_rate = igb_ndo_set_vf_bw, +#endif /* HAVE_VF_MIN_MAX_TXRATE */ + .ndo_get_vf_config = igb_ndo_get_vf_config, +#ifdef HAVE_VF_SPOOFCHK_CONFIGURE + .ndo_set_vf_spoofchk = igb_ndo_set_vf_spoofchk, +#endif /* HAVE_VF_SPOOFCHK_CONFIGURE */ +#endif /* IFLA_VF_MAX */ +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = igb_netpoll, +#endif +#ifdef HAVE_NDO_SET_FEATURES + .ndo_fix_features = igb_fix_features, + .ndo_set_features = igb_set_features, +#endif +#ifdef HAVE_VLAN_RX_REGISTER + .ndo_vlan_rx_register = igb_vlan_mode, +#endif +#ifndef HAVE_RHEL6_NETDEV_OPS_EXT_FDB +#ifdef NTF_SELF + .ndo_fdb_add = igb_ndo_fdb_add, +#ifndef USE_DEFAULT_FDB_DEL_DUMP + .ndo_fdb_del = igb_ndo_fdb_del, + .ndo_fdb_dump = igb_ndo_fdb_dump, +#endif +#endif /* ! HAVE_RHEL6_NETDEV_OPS_EXT_FDB */ +#ifdef HAVE_BRIDGE_ATTRIBS + .ndo_bridge_setlink = igb_ndo_bridge_setlink, + .ndo_bridge_getlink = igb_ndo_bridge_getlink, +#endif /* HAVE_BRIDGE_ATTRIBS */ +#endif +}; + +#ifdef CONFIG_IGB_VMDQ_NETDEV +static const struct net_device_ops igb_vmdq_ops = { + .ndo_open = &igb_vmdq_open, + .ndo_stop = &igb_vmdq_close, + .ndo_start_xmit = &igb_vmdq_xmit_frame, + .ndo_get_stats = &igb_vmdq_get_stats, + .ndo_set_rx_mode = &igb_vmdq_set_rx_mode, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = &igb_vmdq_set_mac, + .ndo_change_mtu = &igb_vmdq_change_mtu, + .ndo_tx_timeout = &igb_vmdq_tx_timeout, + .ndo_vlan_rx_register = &igb_vmdq_vlan_rx_register, + .ndo_vlan_rx_add_vid = &igb_vmdq_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = &igb_vmdq_vlan_rx_kill_vid, +}; + +#endif /* CONFIG_IGB_VMDQ_NETDEV */ +#endif /* HAVE_NET_DEVICE_OPS */ +#ifdef CONFIG_IGB_VMDQ_NETDEV +void igb_assign_vmdq_netdev_ops(struct net_device *vnetdev) +{ +#ifdef HAVE_NET_DEVICE_OPS + vnetdev->netdev_ops = &igb_vmdq_ops; +#else + dev->open = &igb_vmdq_open; + dev->stop = &igb_vmdq_close; + dev->hard_start_xmit = &igb_vmdq_xmit_frame; + dev->get_stats = &igb_vmdq_get_stats; +#ifdef HAVE_SET_RX_MODE + dev->set_rx_mode = &igb_vmdq_set_rx_mode; +#endif + dev->set_multicast_list = &igb_vmdq_set_rx_mode; + dev->set_mac_address = &igb_vmdq_set_mac; + dev->change_mtu = &igb_vmdq_change_mtu; +#ifdef HAVE_TX_TIMEOUT + dev->tx_timeout = &igb_vmdq_tx_timeout; +#endif +#if defined(NETIF_F_HW_VLAN_TX) || defined(NETIF_F_HW_VLAN_CTAG_TX) + dev->vlan_rx_register = &igb_vmdq_vlan_rx_register; + dev->vlan_rx_add_vid = &igb_vmdq_vlan_rx_add_vid; + dev->vlan_rx_kill_vid = &igb_vmdq_vlan_rx_kill_vid; +#endif +#endif + igb_vmdq_set_ethtool_ops(vnetdev); + vnetdev->watchdog_timeo = 5 * HZ; + +} + +int igb_init_vmdq_netdevs(struct igb_adapter *adapter) +{ + int pool, err = 0, base_queue; + struct net_device *vnetdev; + struct igb_vmdq_adapter *vmdq_adapter; + + for (pool = 1; pool < adapter->vmdq_pools; pool++) { + int qpp = (!adapter->rss_queues ? 1 : adapter->rss_queues); + base_queue = pool * qpp; + vnetdev = alloc_etherdev(sizeof(struct igb_vmdq_adapter)); + if (!vnetdev) { + err = -ENOMEM; + break; + } + vmdq_adapter = netdev_priv(vnetdev); + vmdq_adapter->vnetdev = vnetdev; + vmdq_adapter->real_adapter = adapter; + vmdq_adapter->rx_ring = adapter->rx_ring[base_queue]; + vmdq_adapter->tx_ring = adapter->tx_ring[base_queue]; + igb_assign_vmdq_netdev_ops(vnetdev); + snprintf(vnetdev->name, IFNAMSIZ, "%sv%d", + adapter->netdev->name, pool); + vnetdev->features = adapter->netdev->features; +#ifdef HAVE_NETDEV_VLAN_FEATURES + vnetdev->vlan_features = adapter->netdev->vlan_features; +#endif + adapter->vmdq_netdev[pool-1] = vnetdev; + err = register_netdev(vnetdev); + if (err) + break; + } + return err; +} + +int igb_remove_vmdq_netdevs(struct igb_adapter *adapter) +{ + int pool, err = 0; + + for (pool = 1; pool < adapter->vmdq_pools; pool++) { + unregister_netdev(adapter->vmdq_netdev[pool-1]); + free_netdev(adapter->vmdq_netdev[pool-1]); + adapter->vmdq_netdev[pool-1] = NULL; + } + return err; +} +#endif /* CONFIG_IGB_VMDQ_NETDEV */ + +/** + * igb_set_fw_version - Configure version string for ethtool + * @adapter: adapter struct + * + **/ +static void igb_set_fw_version(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_fw_version fw; + + e1000_get_fw_version(hw, &fw); + + switch (hw->mac.type) { + case e1000_i210: + case e1000_i211: + if (!(e1000_get_flash_presence_i210(hw))) { + snprintf(adapter->fw_version, + sizeof(adapter->fw_version), + "%2d.%2d-%d", + fw.invm_major, fw.invm_minor, fw.invm_img_type); + break; + } + /* fall through */ + default: + /* if option rom is valid, display its version too*/ + if (fw.or_valid) { + snprintf(adapter->fw_version, + sizeof(adapter->fw_version), + "%d.%d, 0x%08x, %d.%d.%d", + fw.eep_major, fw.eep_minor, fw.etrack_id, + fw.or_major, fw.or_build, fw.or_patch); + /* no option rom */ + } else { + if (fw.etrack_id != 0X0000) { + snprintf(adapter->fw_version, + sizeof(adapter->fw_version), + "%d.%d, 0x%08x", + fw.eep_major, fw.eep_minor, fw.etrack_id); + } else { + snprintf(adapter->fw_version, + sizeof(adapter->fw_version), + "%d.%d.%d", + fw.eep_major, fw.eep_minor, fw.eep_build); + } + } + break; + } + + return; +} + +/** + * igb_init_mas - init Media Autosense feature if enabled in the NVM + * + * @adapter: adapter struct + **/ +static void igb_init_mas(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u16 eeprom_data; + + e1000_read_nvm(hw, NVM_COMPAT, 1, &eeprom_data); + switch (hw->bus.func) { + case E1000_FUNC_0: + if (eeprom_data & IGB_MAS_ENABLE_0) + adapter->flags |= IGB_FLAG_MAS_ENABLE; + break; + case E1000_FUNC_1: + if (eeprom_data & IGB_MAS_ENABLE_1) + adapter->flags |= IGB_FLAG_MAS_ENABLE; + break; + case E1000_FUNC_2: + if (eeprom_data & IGB_MAS_ENABLE_2) + adapter->flags |= IGB_FLAG_MAS_ENABLE; + break; + case E1000_FUNC_3: + if (eeprom_data & IGB_MAS_ENABLE_3) + adapter->flags |= IGB_FLAG_MAS_ENABLE; + break; + default: + /* Shouldn't get here */ + dev_err(pci_dev_to_dev(adapter->pdev), + "%s:AMS: Invalid port configuration, returning\n", + adapter->netdev->name); + break; + } +} + +/** + * igb_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in igb_pci_tbl + * + * Returns 0 on success, negative on failure + * + * igb_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ +static int __devinit igb_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct igb_adapter *adapter; + struct e1000_hw *hw; + u16 eeprom_data = 0; + u8 pba_str[E1000_PBANUM_LENGTH]; + s32 ret_val; + static int global_quad_port_a; /* global quad port a indication */ + int i, err, pci_using_dac; + static int cards_found; + + err = pci_enable_device_mem(pdev); + if (err) + return err; + + pci_using_dac = 0; + err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); + if (!err) { + err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); + if (!err) + pci_using_dac = 1; + } else { + err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); + if (err) { + err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); + if (err) { + IGB_ERR("No usable DMA configuration, " + "aborting\n"); + goto err_dma; + } + } + } + +#ifndef HAVE_ASPM_QUIRKS + /* 82575 requires that the pci-e link partner disable the L0s state */ + switch (pdev->device) { + case E1000_DEV_ID_82575EB_COPPER: + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82575GB_QUAD_COPPER: + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); + default: + break; + } + +#endif /* HAVE_ASPM_QUIRKS */ + err = pci_request_selected_regions(pdev, + pci_select_bars(pdev, + IORESOURCE_MEM), + igb_driver_name); + if (err) + goto err_pci_reg; + + pci_enable_pcie_error_reporting(pdev); + + pci_set_master(pdev); + + err = -ENOMEM; +#ifdef HAVE_TX_MQ + netdev = alloc_etherdev_mq(sizeof(struct igb_adapter), + IGB_MAX_TX_QUEUES); +#else + netdev = alloc_etherdev(sizeof(struct igb_adapter)); +#endif /* HAVE_TX_MQ */ + if (!netdev) + goto err_alloc_etherdev; + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &pdev->dev); + + pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + hw = &adapter->hw; + hw->back = adapter; + adapter->port_num = hw->bus.func; + adapter->msg_enable = (1 << debug) - 1; + +#ifdef HAVE_PCI_ERS + err = pci_save_state(pdev); + if (err) + goto err_ioremap; +#endif + err = -EIO; + hw->hw_addr = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!hw->hw_addr) + goto err_ioremap; + +#ifdef HAVE_NET_DEVICE_OPS + netdev->netdev_ops = &igb_netdev_ops; +#else /* HAVE_NET_DEVICE_OPS */ + netdev->open = &igb_open; + netdev->stop = &igb_close; + netdev->get_stats = &igb_get_stats; +#ifdef HAVE_SET_RX_MODE + netdev->set_rx_mode = &igb_set_rx_mode; +#endif + netdev->set_multicast_list = &igb_set_rx_mode; + netdev->set_mac_address = &igb_set_mac; + netdev->change_mtu = &igb_change_mtu; + netdev->do_ioctl = &igb_ioctl; +#ifdef HAVE_TX_TIMEOUT + netdev->tx_timeout = &igb_tx_timeout; +#endif + netdev->vlan_rx_register = igb_vlan_mode; + netdev->vlan_rx_add_vid = igb_vlan_rx_add_vid; + netdev->vlan_rx_kill_vid = igb_vlan_rx_kill_vid; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = igb_netpoll; +#endif + netdev->hard_start_xmit = &igb_xmit_frame; +#endif /* HAVE_NET_DEVICE_OPS */ + igb_set_ethtool_ops(netdev); +#ifdef HAVE_TX_TIMEOUT + netdev->watchdog_timeo = 5 * HZ; +#endif + + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + + adapter->bd_number = cards_found; + + /* setup the private structure */ + err = igb_sw_init(adapter); + if (err) + goto err_sw_init; + + e1000_get_bus_info(hw); + + hw->phy.autoneg_wait_to_complete = FALSE; + hw->mac.adaptive_ifs = FALSE; + + /* Copper options */ + if (hw->phy.media_type == e1000_media_type_copper) { + hw->phy.mdix = AUTO_ALL_MODES; + hw->phy.disable_polarity_correction = FALSE; + hw->phy.ms_type = e1000_ms_hw_default; + } + + if (e1000_check_reset_block(hw)) + dev_info(pci_dev_to_dev(pdev), + "PHY reset is blocked due to SOL/IDER session.\n"); + + /* + * features is initialized to 0 in allocation, it might have bits + * set by igb_sw_init so we should use an or instead of an + * assignment. + */ + netdev->features |= NETIF_F_SG | + NETIF_F_IP_CSUM | +#ifdef NETIF_F_IPV6_CSUM + NETIF_F_IPV6_CSUM | +#endif +#ifdef NETIF_F_TSO + NETIF_F_TSO | +#ifdef NETIF_F_TSO6 + NETIF_F_TSO6 | +#endif +#endif /* NETIF_F_TSO */ +#ifdef NETIF_F_RXHASH + NETIF_F_RXHASH | +#endif + NETIF_F_RXCSUM | +#ifdef NETIF_F_HW_VLAN_CTAG_RX + NETIF_F_HW_VLAN_CTAG_RX | + NETIF_F_HW_VLAN_CTAG_TX; +#else + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_TX; +#endif + + if (hw->mac.type >= e1000_82576) + netdev->features |= NETIF_F_SCTP_CSUM; + +#ifdef HAVE_NDO_SET_FEATURES + /* copy netdev features into list of user selectable features */ + netdev->hw_features |= netdev->features; +#ifndef IGB_NO_LRO + + /* give us the option of enabling LRO later */ + netdev->hw_features |= NETIF_F_LRO; +#endif +#else +#ifdef NETIF_F_GRO + + /* this is only needed on kernels prior to 2.6.39 */ + netdev->features |= NETIF_F_GRO; +#endif +#endif + + /* set this bit last since it cannot be part of hw_features */ +#ifdef NETIF_F_HW_VLAN_CTAG_FILTER + netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; +#else + netdev->features |= NETIF_F_HW_VLAN_FILTER; +#endif + +#ifdef HAVE_NETDEV_VLAN_FEATURES + netdev->vlan_features |= NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | + NETIF_F_SG; + +#endif + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + + adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw); +#ifdef DEBUG + if (adapter->dmac != IGB_DMAC_DISABLE) + printk("%s: DMA Coalescing is enabled..\n", netdev->name); +#endif + + /* before reading the NVM, reset the controller to put the device in a + * known good starting state */ + e1000_reset_hw(hw); + + /* make sure the NVM is good */ + if (e1000_validate_nvm_checksum(hw) < 0) { + dev_err(pci_dev_to_dev(pdev), "The NVM Checksum Is Not" + " Valid\n"); + err = -EIO; + goto err_eeprom; + } + + /* copy the MAC address out of the NVM */ + if (e1000_read_mac_addr(hw)) + dev_err(pci_dev_to_dev(pdev), "NVM Read Error\n"); + memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); +#ifdef ETHTOOL_GPERMADDR + memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); + + if (!is_valid_ether_addr(netdev->perm_addr)) { +#else + if (!is_valid_ether_addr(netdev->dev_addr)) { +#endif + dev_err(pci_dev_to_dev(pdev), "Invalid MAC Address\n"); + err = -EIO; + goto err_eeprom; + } + + memcpy(&adapter->mac_table[0].addr, hw->mac.addr, netdev->addr_len); + adapter->mac_table[0].queue = adapter->vfs_allocated_count; + adapter->mac_table[0].state = (IGB_MAC_STATE_DEFAULT | IGB_MAC_STATE_IN_USE); + igb_rar_set(adapter, 0); + + /* get firmware version for ethtool -i */ + igb_set_fw_version(adapter); + + /* Check if Media Autosense is enabled */ + if (hw->mac.type == e1000_82580) + igb_init_mas(adapter); +#ifdef HAVE_TIMER_SETUP + timer_setup(&adapter->watchdog_timer, &igb_watchdog, 0); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + timer_setup(&adapter->dma_err_timer, &igb_dma_err_timer, 0); + timer_setup(&adapter->phy_info_timer, &igb_update_phy_info, 0); +#else + setup_timer(&adapter->watchdog_timer, &igb_watchdog, + (unsigned long) adapter); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + setup_timer(&adapter->dma_err_timer, &igb_dma_err_timer, + (unsigned long) adapter); + setup_timer(&adapter->phy_info_timer, &igb_update_phy_info, + (unsigned long) adapter); +#endif + + INIT_WORK(&adapter->reset_task, igb_reset_task); + INIT_WORK(&adapter->watchdog_task, igb_watchdog_task); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + INIT_WORK(&adapter->dma_err_task, igb_dma_err_task); + + /* Initialize link properties that are user-changeable */ + adapter->fc_autoneg = true; + hw->mac.autoneg = true; + hw->phy.autoneg_advertised = 0x2f; + + hw->fc.requested_mode = e1000_fc_default; + hw->fc.current_mode = e1000_fc_default; + + e1000_validate_mdi_setting(hw); + + /* By default, support wake on port A */ + if (hw->bus.func == 0) + adapter->flags |= IGB_FLAG_WOL_SUPPORTED; + + /* Check the NVM for wake support for non-port A ports */ + if (hw->mac.type >= e1000_82580) + hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + + NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, + &eeprom_data); + else if (hw->bus.func == 1) + e1000_read_nvm(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); + + if (eeprom_data & IGB_EEPROM_APME) + adapter->flags |= IGB_FLAG_WOL_SUPPORTED; + + /* now that we have the eeprom settings, apply the special cases where + * the eeprom may be wrong or the board simply won't support wake on + * lan on a particular port */ + switch (pdev->device) { + case E1000_DEV_ID_82575GB_QUAD_COPPER: + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + break; + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: + /* Wake events only supported on port A for dual fiber + * regardless of eeprom setting */ + if (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_FUNC_1) + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + break; + case E1000_DEV_ID_82576_QUAD_COPPER: + case E1000_DEV_ID_82576_QUAD_COPPER_ET2: + /* if quad port adapter, disable WoL on all but port A */ + if (global_quad_port_a != 0) + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + else + adapter->flags |= IGB_FLAG_QUAD_PORT_A; + /* Reset for multiple quad port adapters */ + if (++global_quad_port_a == 4) + global_quad_port_a = 0; + break; + default: + /* If the device can't wake, don't set software support */ + if (!device_can_wakeup(&adapter->pdev->dev)) + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + break; + } + + /* initialize the wol settings based on the eeprom settings */ + if (adapter->flags & IGB_FLAG_WOL_SUPPORTED) + adapter->wol |= E1000_WUFC_MAG; + + /* Some vendors want WoL disabled by default, but still supported */ + if ((hw->mac.type == e1000_i350) && + (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) { + adapter->flags |= IGB_FLAG_WOL_SUPPORTED; + adapter->wol = 0; + } + + device_set_wakeup_enable(pci_dev_to_dev(adapter->pdev), + adapter->flags & IGB_FLAG_WOL_SUPPORTED); + + /* reset the hardware with the new settings */ + igb_reset(adapter); + adapter->devrc = 0; + +#ifdef HAVE_I2C_SUPPORT + /* Init the I2C interface */ + err = igb_init_i2c(adapter); + if (err) { + dev_err(&pdev->dev, "failed to init i2c interface\n"); + goto err_eeprom; + } +#endif /* HAVE_I2C_SUPPORT */ + + /* let the f/w know that the h/w is now under the control of the + * driver. */ + igb_get_hw_control(adapter); + + strncpy(netdev->name, "eth%d", IFNAMSIZ); + err = register_netdev(netdev); + if (err) + goto err_register; + +#ifdef CONFIG_IGB_VMDQ_NETDEV + err = igb_init_vmdq_netdevs(adapter); + if (err) + goto err_register; +#endif + /* carrier off reporting is important to ethtool even BEFORE open */ + netif_carrier_off(netdev); + +#ifdef IGB_DCA + if (dca_add_requester(&pdev->dev) == E1000_SUCCESS) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; + dev_info(pci_dev_to_dev(pdev), "DCA enabled\n"); + igb_setup_dca(adapter); + } + +#endif +#ifdef HAVE_PTP_1588_CLOCK + /* do hw tstamp init after resetting */ + igb_ptp_init(adapter); +#endif /* HAVE_PTP_1588_CLOCK */ + + dev_info(pci_dev_to_dev(pdev), "Intel(R) Gigabit Ethernet Network Connection\n"); + /* print bus type/speed/width info */ + dev_info(pci_dev_to_dev(pdev), "%s: (PCIe:%s:%s) ", + netdev->name, + ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5GT/s" : + (hw->bus.speed == e1000_bus_speed_5000) ? "5.0GT/s" : + (hw->mac.type == e1000_i354) ? "integrated" : + "unknown"), + ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : + (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" : + (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" : + (hw->mac.type == e1000_i354) ? "integrated" : + "unknown")); + dev_info(pci_dev_to_dev(pdev), "%s: MAC: ", netdev->name); + for (i = 0; i < 6; i++) + printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':'); + + ret_val = e1000_read_pba_string(hw, pba_str, E1000_PBANUM_LENGTH); + if (ret_val) + strncpy(pba_str, "Unknown", sizeof(pba_str) - 1); + dev_info(pci_dev_to_dev(pdev), "%s: PBA No: %s\n", netdev->name, + pba_str); + + + /* Initialize the thermal sensor on i350 devices. */ + if (hw->mac.type == e1000_i350) { + if (hw->bus.func == 0) { + u16 ets_word; + + /* + * Read the NVM to determine if this i350 device + * supports an external thermal sensor. + */ + e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_word); + if (ets_word != 0x0000 && ets_word != 0xFFFF) + adapter->ets = true; + else + adapter->ets = false; + } +#ifdef IGB_HWMON + + igb_sysfs_init(adapter); +#else +#ifdef IGB_PROCFS + + igb_procfs_init(adapter); +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ + } else { + adapter->ets = false; + } + + if (hw->phy.media_type == e1000_media_type_copper) { + switch (hw->mac.type) { + case e1000_i350: + case e1000_i210: + case e1000_i211: + /* Enable EEE for internal copper PHY devices */ + err = e1000_set_eee_i350(hw); + if (!err && + (adapter->flags & IGB_FLAG_EEE)) + adapter->eee_advert = + MDIO_EEE_100TX | MDIO_EEE_1000T; + break; + case e1000_i354: + if ((E1000_READ_REG(hw, E1000_CTRL_EXT)) & + (E1000_CTRL_EXT_LINK_MODE_SGMII)) { + err = e1000_set_eee_i354(hw); + if ((!err) && + (adapter->flags & IGB_FLAG_EEE)) + adapter->eee_advert = + MDIO_EEE_100TX | MDIO_EEE_1000T; + } + break; + default: + break; + } + } + + /* send driver version info to firmware */ + if (hw->mac.type >= e1000_i350) + igb_init_fw(adapter); + +#ifndef IGB_NO_LRO + if (netdev->features & NETIF_F_LRO) + dev_info(pci_dev_to_dev(pdev), "Internal LRO is enabled \n"); + else + dev_info(pci_dev_to_dev(pdev), "LRO is disabled \n"); +#endif + dev_info(pci_dev_to_dev(pdev), + "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n", + adapter->msix_entries ? "MSI-X" : + (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy", + adapter->num_rx_queues, adapter->num_tx_queues); + + cards_found++; + + pm_runtime_put_noidle(&pdev->dev); + return 0; + +err_register: + igb_release_hw_control(adapter); +#ifdef HAVE_I2C_SUPPORT + memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap)); +#endif /* HAVE_I2C_SUPPORT */ +err_eeprom: + if (!e1000_check_reset_block(hw)) + e1000_phy_hw_reset(hw); + + if (hw->flash_address) + iounmap(hw->flash_address); +err_sw_init: + igb_clear_interrupt_scheme(adapter); + igb_reset_sriov_capability(adapter); + iounmap(hw->hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); +err_pci_reg: +err_dma: + pci_disable_device(pdev); + return err; +} +#ifdef HAVE_I2C_SUPPORT +/* + * igb_remove_i2c - Cleanup I2C interface + * @adapter: pointer to adapter structure + * + */ +static void igb_remove_i2c(struct igb_adapter *adapter) +{ + + /* free the adapter bus structure */ + i2c_del_adapter(&adapter->i2c_adap); +} +#endif /* HAVE_I2C_SUPPORT */ + +/** + * igb_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * igb_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +static void __devexit igb_remove(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + pm_runtime_get_noresume(&pdev->dev); +#ifdef HAVE_I2C_SUPPORT + igb_remove_i2c(adapter); +#endif /* HAVE_I2C_SUPPORT */ +#ifdef HAVE_PTP_1588_CLOCK + igb_ptp_stop(adapter); +#endif /* HAVE_PTP_1588_CLOCK */ + + /* flush_scheduled work may reschedule our watchdog task, so + * explicitly disable watchdog tasks from being rescheduled */ + set_bit(__IGB_DOWN, &adapter->state); + del_timer_sync(&adapter->watchdog_timer); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + del_timer_sync(&adapter->dma_err_timer); + del_timer_sync(&adapter->phy_info_timer); + + flush_scheduled_work(); + +#ifdef IGB_DCA + if (adapter->flags & IGB_FLAG_DCA_ENABLED) { + dev_info(pci_dev_to_dev(pdev), "DCA disabled\n"); + dca_remove_requester(&pdev->dev); + adapter->flags &= ~IGB_FLAG_DCA_ENABLED; + E1000_WRITE_REG(hw, E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_DISABLE); + } +#endif + + /* Release control of h/w to f/w. If f/w is AMT enabled, this + * would have already happened in close and is redundant. */ + igb_release_hw_control(adapter); + + unregister_netdev(netdev); +#ifdef CONFIG_IGB_VMDQ_NETDEV + igb_remove_vmdq_netdevs(adapter); +#endif + + igb_clear_interrupt_scheme(adapter); + igb_reset_sriov_capability(adapter); + + iounmap(hw->hw_addr); + if (hw->flash_address) + iounmap(hw->flash_address); + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); + +#ifdef IGB_HWMON + igb_sysfs_exit(adapter); +#else +#ifdef IGB_PROCFS + igb_procfs_exit(adapter); +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ + kfree(adapter->mac_table); + kfree(adapter->shadow_vfta); + free_netdev(netdev); + + pci_disable_pcie_error_reporting(pdev); + + pci_disable_device(pdev); +} + +/** + * igb_sw_init - Initialize general software structures (struct igb_adapter) + * @adapter: board private structure to initialize + * + * igb_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + **/ +static int igb_sw_init(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + + /* PCI config space info */ + + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_device_id = pdev->subsystem_device; + + pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id); + + pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word); + + /* set default ring sizes */ + adapter->tx_ring_count = IGB_DEFAULT_TXD; + adapter->rx_ring_count = IGB_DEFAULT_RXD; + + /* set default work limits */ + adapter->tx_work_limit = IGB_DEFAULT_TX_WORK; + + adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + + VLAN_HLEN; + + /* Initialize the hardware-specific values */ + if (e1000_setup_init_funcs(hw, TRUE)) { + dev_err(pci_dev_to_dev(pdev), "Hardware Initialization Failure\n"); + return -EIO; + } + + adapter->mac_table = kzalloc(sizeof(struct igb_mac_addr) * + hw->mac.rar_entry_count, + GFP_ATOMIC); + + /* Setup and initialize a copy of the hw vlan table array */ + adapter->shadow_vfta = kzalloc(sizeof(u32) * E1000_VFTA_ENTRIES, + GFP_ATOMIC); +#ifdef NO_KNI + /* These calls may decrease the number of queues */ + if (hw->mac.type < e1000_i210) { + igb_set_sriov_capability(adapter); + } + + if (igb_init_interrupt_scheme(adapter, true)) { + dev_err(pci_dev_to_dev(pdev), "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + + /* Explicitly disable IRQ since the NIC can be in any state. */ + igb_irq_disable(adapter); + + set_bit(__IGB_DOWN, &adapter->state); +#endif + return 0; +} + +/** + * igb_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + **/ +static int __igb_open(struct net_device *netdev, bool resuming) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; +#ifdef CONFIG_PM_RUNTIME + struct pci_dev *pdev = adapter->pdev; +#endif /* CONFIG_PM_RUNTIME */ + int err; + int i; + + /* disallow open during test */ + if (test_bit(__IGB_TESTING, &adapter->state)) { + WARN_ON(resuming); + return -EBUSY; + } + +#ifdef CONFIG_PM_RUNTIME + if (!resuming) + pm_runtime_get_sync(&pdev->dev); +#endif /* CONFIG_PM_RUNTIME */ + + netif_carrier_off(netdev); + + /* allocate transmit descriptors */ + err = igb_setup_all_tx_resources(adapter); + if (err) + goto err_setup_tx; + + /* allocate receive descriptors */ + err = igb_setup_all_rx_resources(adapter); + if (err) + goto err_setup_rx; + + igb_power_up_link(adapter); + + /* before we allocate an interrupt, we must be ready to handle it. + * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt + * as soon as we call pci_request_irq, so we have to setup our + * clean_rx handler before we do so. */ + igb_configure(adapter); + + err = igb_request_irq(adapter); + if (err) + goto err_req_irq; + + /* Notify the stack of the actual queue counts. */ + netif_set_real_num_tx_queues(netdev, + adapter->vmdq_pools ? 1 : + adapter->num_tx_queues); + + err = netif_set_real_num_rx_queues(netdev, + adapter->vmdq_pools ? 1 : + adapter->num_rx_queues); + if (err) + goto err_set_queues; + + /* From here on the code is the same as igb_up() */ + clear_bit(__IGB_DOWN, &adapter->state); + + for (i = 0; i < adapter->num_q_vectors; i++) + napi_enable(&(adapter->q_vector[i]->napi)); + igb_configure_lli(adapter); + + /* Clear any pending interrupts. */ + E1000_READ_REG(hw, E1000_ICR); + + igb_irq_enable(adapter); + + /* notify VFs that reset has been completed */ + if (adapter->vfs_allocated_count) { + u32 reg_data = E1000_READ_REG(hw, E1000_CTRL_EXT); + reg_data |= E1000_CTRL_EXT_PFRSTD; + E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg_data); + } + + netif_tx_start_all_queues(netdev); + + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + schedule_work(&adapter->dma_err_task); + + /* start the watchdog. */ + hw->mac.get_link_status = 1; + schedule_work(&adapter->watchdog_task); + + return E1000_SUCCESS; + +err_set_queues: + igb_free_irq(adapter); +err_req_irq: + igb_release_hw_control(adapter); + igb_power_down_link(adapter); + igb_free_all_rx_resources(adapter); +err_setup_rx: + igb_free_all_tx_resources(adapter); +err_setup_tx: + igb_reset(adapter); + +#ifdef CONFIG_PM_RUNTIME + if (!resuming) + pm_runtime_put(&pdev->dev); +#endif /* CONFIG_PM_RUNTIME */ + + return err; +} + +static int igb_open(struct net_device *netdev) +{ + return __igb_open(netdev, false); +} + +/** + * igb_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the driver's control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +static int __igb_close(struct net_device *netdev, bool suspending) +{ + struct igb_adapter *adapter = netdev_priv(netdev); +#ifdef CONFIG_PM_RUNTIME + struct pci_dev *pdev = adapter->pdev; +#endif /* CONFIG_PM_RUNTIME */ + + WARN_ON(test_bit(__IGB_RESETTING, &adapter->state)); + +#ifdef CONFIG_PM_RUNTIME + if (!suspending) + pm_runtime_get_sync(&pdev->dev); +#endif /* CONFIG_PM_RUNTIME */ + + igb_down(adapter); + + igb_release_hw_control(adapter); + + igb_free_irq(adapter); + + igb_free_all_tx_resources(adapter); + igb_free_all_rx_resources(adapter); + +#ifdef CONFIG_PM_RUNTIME + if (!suspending) + pm_runtime_put_sync(&pdev->dev); +#endif /* CONFIG_PM_RUNTIME */ + + return 0; +} + +static int igb_close(struct net_device *netdev) +{ + return __igb_close(netdev, false); +} + +/** + * igb_setup_tx_resources - allocate Tx resources (Descriptors) + * @tx_ring: tx descriptor ring (for a specific queue) to setup + * + * Return 0 on success, negative on failure + **/ +int igb_setup_tx_resources(struct igb_ring *tx_ring) +{ + struct device *dev = tx_ring->dev; + int size; + + size = sizeof(struct igb_tx_buffer) * tx_ring->count; + tx_ring->tx_buffer_info = vzalloc(size); + if (!tx_ring->tx_buffer_info) + goto err; + + /* round up to nearest 4K */ + tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc); + tx_ring->size = ALIGN(tx_ring->size, 4096); + + tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, + &tx_ring->dma, GFP_KERNEL); + + if (!tx_ring->desc) + goto err; + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + + return 0; + +err: + vfree(tx_ring->tx_buffer_info); + dev_err(dev, + "Unable to allocate memory for the transmit descriptor ring\n"); + return -ENOMEM; +} + +/** + * igb_setup_all_tx_resources - wrapper to allocate Tx resources + * (Descriptors) for all queues + * @adapter: board private structure + * + * Return 0 on success, negative on failure + **/ +static int igb_setup_all_tx_resources(struct igb_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + int i, err = 0; + + for (i = 0; i < adapter->num_tx_queues; i++) { + err = igb_setup_tx_resources(adapter->tx_ring[i]); + if (err) { + dev_err(pci_dev_to_dev(pdev), + "Allocation for Tx Queue %u failed\n", i); + for (i--; i >= 0; i--) + igb_free_tx_resources(adapter->tx_ring[i]); + break; + } + } + + return err; +} + +/** + * igb_setup_tctl - configure the transmit control registers + * @adapter: Board private structure + **/ +void igb_setup_tctl(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 tctl; + + /* disable queue 0 which is enabled by default on 82575 and 82576 */ + E1000_WRITE_REG(hw, E1000_TXDCTL(0), 0); + + /* Program the Transmit Control Register */ + tctl = E1000_READ_REG(hw, E1000_TCTL); + tctl &= ~E1000_TCTL_CT; + tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | + (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); + + e1000_config_collision_dist(hw); + + /* Enable transmits */ + tctl |= E1000_TCTL_EN; + + E1000_WRITE_REG(hw, E1000_TCTL, tctl); +} + +static u32 igb_tx_wthresh(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + switch (hw->mac.type) { + case e1000_i354: + return 4; + case e1000_82576: + if (adapter->msix_entries) + return 1; + default: + break; + } + + return 16; +} + +/** + * igb_configure_tx_ring - Configure transmit ring after Reset + * @adapter: board private structure + * @ring: tx ring to configure + * + * Configure a transmit ring after a reset. + **/ +void igb_configure_tx_ring(struct igb_adapter *adapter, + struct igb_ring *ring) +{ + struct e1000_hw *hw = &adapter->hw; + u32 txdctl = 0; + u64 tdba = ring->dma; + int reg_idx = ring->reg_idx; + + /* disable the queue */ + E1000_WRITE_REG(hw, E1000_TXDCTL(reg_idx), 0); + E1000_WRITE_FLUSH(hw); + mdelay(10); + + E1000_WRITE_REG(hw, E1000_TDLEN(reg_idx), + ring->count * sizeof(union e1000_adv_tx_desc)); + E1000_WRITE_REG(hw, E1000_TDBAL(reg_idx), + tdba & 0x00000000ffffffffULL); + E1000_WRITE_REG(hw, E1000_TDBAH(reg_idx), tdba >> 32); + + ring->tail = hw->hw_addr + E1000_TDT(reg_idx); + E1000_WRITE_REG(hw, E1000_TDH(reg_idx), 0); + writel(0, ring->tail); + + txdctl |= IGB_TX_PTHRESH; + txdctl |= IGB_TX_HTHRESH << 8; + txdctl |= igb_tx_wthresh(adapter) << 16; + + txdctl |= E1000_TXDCTL_QUEUE_ENABLE; + E1000_WRITE_REG(hw, E1000_TXDCTL(reg_idx), txdctl); +} + +/** + * igb_configure_tx - Configure transmit Unit after Reset + * @adapter: board private structure + * + * Configure the Tx unit of the MAC after a reset. + **/ +static void igb_configure_tx(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + igb_configure_tx_ring(adapter, adapter->tx_ring[i]); +} + +/** + * igb_setup_rx_resources - allocate Rx resources (Descriptors) + * @rx_ring: rx descriptor ring (for a specific queue) to setup + * + * Returns 0 on success, negative on failure + **/ +int igb_setup_rx_resources(struct igb_ring *rx_ring) +{ + struct device *dev = rx_ring->dev; + int size, desc_len; + + size = sizeof(struct igb_rx_buffer) * rx_ring->count; + rx_ring->rx_buffer_info = vzalloc(size); + if (!rx_ring->rx_buffer_info) + goto err; + + desc_len = sizeof(union e1000_adv_rx_desc); + + /* Round up to nearest 4K */ + rx_ring->size = rx_ring->count * desc_len; + rx_ring->size = ALIGN(rx_ring->size, 4096); + + rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, + &rx_ring->dma, GFP_KERNEL); + + if (!rx_ring->desc) + goto err; + + rx_ring->next_to_alloc = 0; + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + + return 0; + +err: + vfree(rx_ring->rx_buffer_info); + rx_ring->rx_buffer_info = NULL; + dev_err(dev, "Unable to allocate memory for the receive descriptor" + " ring\n"); + return -ENOMEM; +} + +/** + * igb_setup_all_rx_resources - wrapper to allocate Rx resources + * (Descriptors) for all queues + * @adapter: board private structure + * + * Return 0 on success, negative on failure + **/ +static int igb_setup_all_rx_resources(struct igb_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + int i, err = 0; + + for (i = 0; i < adapter->num_rx_queues; i++) { + err = igb_setup_rx_resources(adapter->rx_ring[i]); + if (err) { + dev_err(pci_dev_to_dev(pdev), + "Allocation for Rx Queue %u failed\n", i); + for (i--; i >= 0; i--) + igb_free_rx_resources(adapter->rx_ring[i]); + break; + } + } + + return err; +} + +/** + * igb_setup_mrqc - configure the multiple receive queue control registers + * @adapter: Board private structure + **/ +static void igb_setup_mrqc(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 mrqc, rxcsum; + u32 j, num_rx_queues, shift = 0, shift2 = 0; + static const u32 rsskey[10] = { 0xDA565A6D, 0xC20E5B25, 0x3D256741, + 0xB08FA343, 0xCB2BCAD0, 0xB4307BAE, + 0xA32DCB77, 0x0CF23080, 0x3BB7426A, + 0xFA01ACBE }; + + /* Fill out hash function seeds */ + for (j = 0; j < 10; j++) + E1000_WRITE_REG(hw, E1000_RSSRK(j), rsskey[j]); + + num_rx_queues = adapter->rss_queues; + + /* 82575 and 82576 supports 2 RSS queues for VMDq */ + switch (hw->mac.type) { + case e1000_82575: + if (adapter->vmdq_pools) { + shift = 2; + shift2 = 6; + break; + } + shift = 6; + break; + case e1000_82576: + /* 82576 supports 2 RSS queues for SR-IOV */ + if (adapter->vfs_allocated_count || adapter->vmdq_pools) { + shift = 3; + num_rx_queues = 2; + } + break; + default: + break; + } + + /* + * Populate the redirection table 4 entries at a time. To do this + * we are generating the results for n and n+2 and then interleaving + * those with the results with n+1 and n+3. + */ + for (j = 0; j < 32; j++) { + /* first pass generates n and n+2 */ + u32 base = ((j * 0x00040004) + 0x00020000) * num_rx_queues; + u32 reta = (base & 0x07800780) >> (7 - shift); + + /* second pass generates n+1 and n+3 */ + base += 0x00010001 * num_rx_queues; + reta |= (base & 0x07800780) << (1 + shift); + + /* generate 2nd table for 82575 based parts */ + if (shift2) + reta |= (0x01010101 * num_rx_queues) << shift2; + + E1000_WRITE_REG(hw, E1000_RETA(j), reta); + } + + /* + * Disable raw packet checksumming so that RSS hash is placed in + * descriptor on writeback. No need to enable TCP/UDP/IP checksum + * offloads as they are enabled by default + */ + rxcsum = E1000_READ_REG(hw, E1000_RXCSUM); + rxcsum |= E1000_RXCSUM_PCSD; + + if (adapter->hw.mac.type >= e1000_82576) + /* Enable Receive Checksum Offload for SCTP */ + rxcsum |= E1000_RXCSUM_CRCOFL; + + /* Don't need to set TUOFL or IPOFL, they default to 1 */ + E1000_WRITE_REG(hw, E1000_RXCSUM, rxcsum); + + /* Generate RSS hash based on packet types, TCP/UDP + * port numbers and/or IPv4/v6 src and dst addresses + */ + mrqc = E1000_MRQC_RSS_FIELD_IPV4 | + E1000_MRQC_RSS_FIELD_IPV4_TCP | + E1000_MRQC_RSS_FIELD_IPV6 | + E1000_MRQC_RSS_FIELD_IPV6_TCP | + E1000_MRQC_RSS_FIELD_IPV6_TCP_EX; + + if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP) + mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP; + if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP) + mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP; + + /* If VMDq is enabled then we set the appropriate mode for that, else + * we default to RSS so that an RSS hash is calculated per packet even + * if we are only using one queue */ + if (adapter->vfs_allocated_count || adapter->vmdq_pools) { + if (hw->mac.type > e1000_82575) { + /* Set the default pool for the PF's first queue */ + u32 vtctl = E1000_READ_REG(hw, E1000_VT_CTL); + vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK | + E1000_VT_CTL_DISABLE_DEF_POOL); + vtctl |= adapter->vfs_allocated_count << + E1000_VT_CTL_DEFAULT_POOL_SHIFT; + E1000_WRITE_REG(hw, E1000_VT_CTL, vtctl); + } else if (adapter->rss_queues > 1) { + /* set default queue for pool 1 to queue 2 */ + E1000_WRITE_REG(hw, E1000_VT_CTL, + adapter->rss_queues << 7); + } + if (adapter->rss_queues > 1) + mrqc |= E1000_MRQC_ENABLE_VMDQ_RSS_2Q; + else + mrqc |= E1000_MRQC_ENABLE_VMDQ; + } else { + mrqc |= E1000_MRQC_ENABLE_RSS_4Q; + } + igb_vmm_control(adapter); + + E1000_WRITE_REG(hw, E1000_MRQC, mrqc); +} + +/** + * igb_setup_rctl - configure the receive control registers + * @adapter: Board private structure + **/ +void igb_setup_rctl(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl; + + rctl = E1000_READ_REG(hw, E1000_RCTL); + + rctl &= ~(3 << E1000_RCTL_MO_SHIFT); + rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); + + rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF | + (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT); + + /* + * enable stripping of CRC. It's unlikely this will break BMC + * redirection as it did with e1000. Newer features require + * that the HW strips the CRC. + */ + rctl |= E1000_RCTL_SECRC; + + /* disable store bad packets and clear size bits. */ + rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256); + + /* enable LPE to prevent packets larger than max_frame_size */ + rctl |= E1000_RCTL_LPE; + + /* disable queue 0 to prevent tail write w/o re-config */ + E1000_WRITE_REG(hw, E1000_RXDCTL(0), 0); + + /* Attention!!! For SR-IOV PF driver operations you must enable + * queue drop for all VF and PF queues to prevent head of line blocking + * if an un-trusted VF does not provide descriptors to hardware. + */ + if (adapter->vfs_allocated_count) { + /* set all queue drop enable bits */ + E1000_WRITE_REG(hw, E1000_QDE, ALL_QUEUES); + } + + E1000_WRITE_REG(hw, E1000_RCTL, rctl); +} + +static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size, + int vfn) +{ + struct e1000_hw *hw = &adapter->hw; + u32 vmolr; + + /* if it isn't the PF check to see if VFs are enabled and + * increase the size to support vlan tags */ + if (vfn < adapter->vfs_allocated_count && + adapter->vf_data[vfn].vlans_enabled) + size += VLAN_HLEN; + +#ifdef CONFIG_IGB_VMDQ_NETDEV + if (vfn >= adapter->vfs_allocated_count) { + int queue = vfn - adapter->vfs_allocated_count; + struct igb_vmdq_adapter *vadapter; + + vadapter = netdev_priv(adapter->vmdq_netdev[queue-1]); + if (vadapter->vlgrp) + size += VLAN_HLEN; + } +#endif + vmolr = E1000_READ_REG(hw, E1000_VMOLR(vfn)); + vmolr &= ~E1000_VMOLR_RLPML_MASK; + vmolr |= size | E1000_VMOLR_LPE; + E1000_WRITE_REG(hw, E1000_VMOLR(vfn), vmolr); + + return 0; +} + +/** + * igb_rlpml_set - set maximum receive packet size + * @adapter: board private structure + * + * Configure maximum receivable packet size. + **/ +static void igb_rlpml_set(struct igb_adapter *adapter) +{ + u32 max_frame_size = adapter->max_frame_size; + struct e1000_hw *hw = &adapter->hw; + u16 pf_id = adapter->vfs_allocated_count; + + if (adapter->vmdq_pools && hw->mac.type != e1000_82575) { + int i; + for (i = 0; i < adapter->vmdq_pools; i++) + igb_set_vf_rlpml(adapter, max_frame_size, pf_id + i); + /* + * If we're in VMDQ or SR-IOV mode, then set global RLPML + * to our max jumbo frame size, in case we need to enable + * jumbo frames on one of the rings later. + * This will not pass over-length frames into the default + * queue because it's gated by the VMOLR.RLPML. + */ + max_frame_size = MAX_JUMBO_FRAME_SIZE; + } + /* Set VF RLPML for the PF device. */ + if (adapter->vfs_allocated_count) + igb_set_vf_rlpml(adapter, max_frame_size, pf_id); + + E1000_WRITE_REG(hw, E1000_RLPML, max_frame_size); +} + +static inline void igb_set_vf_vlan_strip(struct igb_adapter *adapter, + int vfn, bool enable) +{ + struct e1000_hw *hw = &adapter->hw; + u32 val; + void __iomem *reg; + + if (hw->mac.type < e1000_82576) + return; + + if (hw->mac.type == e1000_i350) + reg = hw->hw_addr + E1000_DVMOLR(vfn); + else + reg = hw->hw_addr + E1000_VMOLR(vfn); + + val = readl(reg); + if (enable) + val |= E1000_VMOLR_STRVLAN; + else + val &= ~(E1000_VMOLR_STRVLAN); + writel(val, reg); +} +static inline void igb_set_vmolr(struct igb_adapter *adapter, + int vfn, bool aupe) +{ + struct e1000_hw *hw = &adapter->hw; + u32 vmolr; + + /* + * This register exists only on 82576 and newer so if we are older then + * we should exit and do nothing + */ + if (hw->mac.type < e1000_82576) + return; + + vmolr = E1000_READ_REG(hw, E1000_VMOLR(vfn)); + + if (aupe) + vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */ + else + vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */ + + /* clear all bits that might not be set */ + vmolr &= ~E1000_VMOLR_RSSE; + + if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count) + vmolr |= E1000_VMOLR_RSSE; /* enable RSS */ + + vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */ + vmolr |= E1000_VMOLR_LPE; /* Accept long packets */ + + E1000_WRITE_REG(hw, E1000_VMOLR(vfn), vmolr); +} + +/** + * igb_configure_rx_ring - Configure a receive ring after Reset + * @adapter: board private structure + * @ring: receive ring to be configured + * + * Configure the Rx unit of the MAC after a reset. + **/ +void igb_configure_rx_ring(struct igb_adapter *adapter, + struct igb_ring *ring) +{ + struct e1000_hw *hw = &adapter->hw; + u64 rdba = ring->dma; + int reg_idx = ring->reg_idx; + u32 srrctl = 0, rxdctl = 0; + +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + /* + * RLPML prevents us from receiving a frame larger than max_frame so + * it is safe to just set the rx_buffer_len to max_frame without the + * risk of an skb over panic. + */ + ring->rx_buffer_len = max_t(u32, adapter->max_frame_size, + MAXIMUM_ETHERNET_VLAN_SIZE); + +#endif + /* disable the queue */ + E1000_WRITE_REG(hw, E1000_RXDCTL(reg_idx), 0); + + /* Set DMA base address registers */ + E1000_WRITE_REG(hw, E1000_RDBAL(reg_idx), + rdba & 0x00000000ffffffffULL); + E1000_WRITE_REG(hw, E1000_RDBAH(reg_idx), rdba >> 32); + E1000_WRITE_REG(hw, E1000_RDLEN(reg_idx), + ring->count * sizeof(union e1000_adv_rx_desc)); + + /* initialize head and tail */ + ring->tail = hw->hw_addr + E1000_RDT(reg_idx); + E1000_WRITE_REG(hw, E1000_RDH(reg_idx), 0); + writel(0, ring->tail); + + /* reset next-to- use/clean to place SW in sync with hardwdare */ + ring->next_to_clean = 0; + ring->next_to_use = 0; +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + ring->next_to_alloc = 0; + +#endif + /* set descriptor configuration */ +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + srrctl = IGB_RX_HDR_LEN << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; + srrctl |= IGB_RX_BUFSZ >> E1000_SRRCTL_BSIZEPKT_SHIFT; +#else /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ + srrctl = ALIGN(ring->rx_buffer_len, 1024) >> + E1000_SRRCTL_BSIZEPKT_SHIFT; +#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ + srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF; +#ifdef HAVE_PTP_1588_CLOCK + if (hw->mac.type >= e1000_82580) + srrctl |= E1000_SRRCTL_TIMESTAMP; +#endif /* HAVE_PTP_1588_CLOCK */ + /* + * We should set the drop enable bit if: + * SR-IOV is enabled + * or + * Flow Control is disabled and number of RX queues > 1 + * + * This allows us to avoid head of line blocking for security + * and performance reasons. + */ + if (adapter->vfs_allocated_count || + (adapter->num_rx_queues > 1 && + (hw->fc.requested_mode == e1000_fc_none || + hw->fc.requested_mode == e1000_fc_rx_pause))) + srrctl |= E1000_SRRCTL_DROP_EN; + + E1000_WRITE_REG(hw, E1000_SRRCTL(reg_idx), srrctl); + + /* set filtering for VMDQ pools */ + igb_set_vmolr(adapter, reg_idx & 0x7, true); + + rxdctl |= IGB_RX_PTHRESH; + rxdctl |= IGB_RX_HTHRESH << 8; + rxdctl |= IGB_RX_WTHRESH << 16; + + /* enable receive descriptor fetching */ + rxdctl |= E1000_RXDCTL_QUEUE_ENABLE; + E1000_WRITE_REG(hw, E1000_RXDCTL(reg_idx), rxdctl); +} + +/** + * igb_configure_rx - Configure receive Unit after Reset + * @adapter: board private structure + * + * Configure the Rx unit of the MAC after a reset. + **/ +static void igb_configure_rx(struct igb_adapter *adapter) +{ + int i; + + /* set UTA to appropriate mode */ + igb_set_uta(adapter); + + igb_full_sync_mac_table(adapter); + /* Setup the HW Rx Head and Tail Descriptor Pointers and + * the Base and Length of the Rx Descriptor Ring */ + for (i = 0; i < adapter->num_rx_queues; i++) + igb_configure_rx_ring(adapter, adapter->rx_ring[i]); +} + +/** + * igb_free_tx_resources - Free Tx Resources per Queue + * @tx_ring: Tx descriptor ring for a specific queue + * + * Free all transmit software resources + **/ +void igb_free_tx_resources(struct igb_ring *tx_ring) +{ + igb_clean_tx_ring(tx_ring); + + vfree(tx_ring->tx_buffer_info); + tx_ring->tx_buffer_info = NULL; + + /* if not set, then don't free */ + if (!tx_ring->desc) + return; + + dma_free_coherent(tx_ring->dev, tx_ring->size, + tx_ring->desc, tx_ring->dma); + + tx_ring->desc = NULL; +} + +/** + * igb_free_all_tx_resources - Free Tx Resources for All Queues + * @adapter: board private structure + * + * Free all transmit software resources + **/ +static void igb_free_all_tx_resources(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + igb_free_tx_resources(adapter->tx_ring[i]); +} + +void igb_unmap_and_free_tx_resource(struct igb_ring *ring, + struct igb_tx_buffer *tx_buffer) +{ + if (tx_buffer->skb) { + dev_kfree_skb_any(tx_buffer->skb); + if (dma_unmap_len(tx_buffer, len)) + dma_unmap_single(ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + } else if (dma_unmap_len(tx_buffer, len)) { + dma_unmap_page(ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + } + tx_buffer->next_to_watch = NULL; + tx_buffer->skb = NULL; + dma_unmap_len_set(tx_buffer, len, 0); + /* buffer_info must be completely set up in the transmit path */ +} + +/** + * igb_clean_tx_ring - Free Tx Buffers + * @tx_ring: ring to be cleaned + **/ +static void igb_clean_tx_ring(struct igb_ring *tx_ring) +{ + struct igb_tx_buffer *buffer_info; + unsigned long size; + u16 i; + + if (!tx_ring->tx_buffer_info) + return; + /* Free all the Tx ring sk_buffs */ + + for (i = 0; i < tx_ring->count; i++) { + buffer_info = &tx_ring->tx_buffer_info[i]; + igb_unmap_and_free_tx_resource(tx_ring, buffer_info); + } + + netdev_tx_reset_queue(txring_txq(tx_ring)); + + size = sizeof(struct igb_tx_buffer) * tx_ring->count; + memset(tx_ring->tx_buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(tx_ring->desc, 0, tx_ring->size); + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; +} + +/** + * igb_clean_all_tx_rings - Free Tx Buffers for all queues + * @adapter: board private structure + **/ +static void igb_clean_all_tx_rings(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + igb_clean_tx_ring(adapter->tx_ring[i]); +} + +/** + * igb_free_rx_resources - Free Rx Resources + * @rx_ring: ring to clean the resources from + * + * Free all receive software resources + **/ +void igb_free_rx_resources(struct igb_ring *rx_ring) +{ + igb_clean_rx_ring(rx_ring); + + vfree(rx_ring->rx_buffer_info); + rx_ring->rx_buffer_info = NULL; + + /* if not set, then don't free */ + if (!rx_ring->desc) + return; + + dma_free_coherent(rx_ring->dev, rx_ring->size, + rx_ring->desc, rx_ring->dma); + + rx_ring->desc = NULL; +} + +/** + * igb_free_all_rx_resources - Free Rx Resources for All Queues + * @adapter: board private structure + * + * Free all receive software resources + **/ +static void igb_free_all_rx_resources(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) + igb_free_rx_resources(adapter->rx_ring[i]); +} + +/** + * igb_clean_rx_ring - Free Rx Buffers per Queue + * @rx_ring: ring to free buffers from + **/ +void igb_clean_rx_ring(struct igb_ring *rx_ring) +{ + unsigned long size; + u16 i; + + if (!rx_ring->rx_buffer_info) + return; + +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + if (rx_ring->skb) + dev_kfree_skb(rx_ring->skb); + rx_ring->skb = NULL; + +#endif + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rx_ring->count; i++) { + struct igb_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i]; +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + if (buffer_info->dma) { + dma_unmap_single(rx_ring->dev, + buffer_info->dma, + rx_ring->rx_buffer_len, + DMA_FROM_DEVICE); + buffer_info->dma = 0; + } + + if (buffer_info->skb) { + dev_kfree_skb(buffer_info->skb); + buffer_info->skb = NULL; + } +#else + if (!buffer_info->page) + continue; + + dma_unmap_page(rx_ring->dev, + buffer_info->dma, + PAGE_SIZE, + DMA_FROM_DEVICE); + __free_page(buffer_info->page); + + buffer_info->page = NULL; +#endif + } + + size = sizeof(struct igb_rx_buffer) * rx_ring->count; + memset(rx_ring->rx_buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(rx_ring->desc, 0, rx_ring->size); + + rx_ring->next_to_alloc = 0; + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; +} + +/** + * igb_clean_all_rx_rings - Free Rx Buffers for all queues + * @adapter: board private structure + **/ +static void igb_clean_all_rx_rings(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) + igb_clean_rx_ring(adapter->rx_ring[i]); +} + +/** + * igb_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ +static int igb_set_mac(struct net_device *netdev, void *p) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + igb_del_mac_filter(adapter, hw->mac.addr, + adapter->vfs_allocated_count); + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); + + /* set the correct pool for the new PF MAC address in entry 0 */ + return igb_add_mac_filter(adapter, hw->mac.addr, + adapter->vfs_allocated_count); +} + +/** + * igb_write_mc_addr_list - write multicast addresses to MTA + * @netdev: network interface device structure + * + * Writes multicast address list to the MTA hash table. + * Returns: -ENOMEM on failure + * 0 on no addresses written + * X on writing X addresses to MTA + **/ +int igb_write_mc_addr_list(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; +#ifdef NETDEV_HW_ADDR_T_MULTICAST + struct netdev_hw_addr *ha; +#else + struct dev_mc_list *ha; +#endif + u8 *mta_list; + int i, count; +#ifdef CONFIG_IGB_VMDQ_NETDEV + int vm; +#endif + count = netdev_mc_count(netdev); +#ifdef CONFIG_IGB_VMDQ_NETDEV + for (vm = 1; vm < adapter->vmdq_pools; vm++) { + if (!adapter->vmdq_netdev[vm]) + break; + if (!netif_running(adapter->vmdq_netdev[vm])) + continue; + count += netdev_mc_count(adapter->vmdq_netdev[vm]); + } +#endif + + if (!count) { + e1000_update_mc_addr_list(hw, NULL, 0); + return 0; + } + mta_list = kzalloc(count * 6, GFP_ATOMIC); + if (!mta_list) + return -ENOMEM; + + /* The shared function expects a packed array of only addresses. */ + i = 0; + netdev_for_each_mc_addr(ha, netdev) +#ifdef NETDEV_HW_ADDR_T_MULTICAST + memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); +#else + memcpy(mta_list + (i++ * ETH_ALEN), ha->dmi_addr, ETH_ALEN); +#endif +#ifdef CONFIG_IGB_VMDQ_NETDEV + for (vm = 1; vm < adapter->vmdq_pools; vm++) { + if (!adapter->vmdq_netdev[vm]) + break; + if (!netif_running(adapter->vmdq_netdev[vm]) || + !netdev_mc_count(adapter->vmdq_netdev[vm])) + continue; + netdev_for_each_mc_addr(ha, adapter->vmdq_netdev[vm]) +#ifdef NETDEV_HW_ADDR_T_MULTICAST + memcpy(mta_list + (i++ * ETH_ALEN), + ha->addr, ETH_ALEN); +#else + memcpy(mta_list + (i++ * ETH_ALEN), + ha->dmi_addr, ETH_ALEN); +#endif + } +#endif + e1000_update_mc_addr_list(hw, mta_list, i); + kfree(mta_list); + + return count; +} + +void igb_rar_set(struct igb_adapter *adapter, u32 index) +{ + u32 rar_low, rar_high; + struct e1000_hw *hw = &adapter->hw; + u8 *addr = adapter->mac_table[index].addr; + /* HW expects these in little endian so we reverse the byte order + * from network order (big endian) to little endian + */ + rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); + + /* Indicate to hardware the Address is Valid. */ + if (adapter->mac_table[index].state & IGB_MAC_STATE_IN_USE) + rar_high |= E1000_RAH_AV; + + if (hw->mac.type == e1000_82575) + rar_high |= E1000_RAH_POOL_1 * adapter->mac_table[index].queue; + else + rar_high |= E1000_RAH_POOL_1 << adapter->mac_table[index].queue; + + E1000_WRITE_REG(hw, E1000_RAL(index), rar_low); + E1000_WRITE_FLUSH(hw); + E1000_WRITE_REG(hw, E1000_RAH(index), rar_high); + E1000_WRITE_FLUSH(hw); +} + +void igb_full_sync_mac_table(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + for (i = 0; i < hw->mac.rar_entry_count; i++) { + igb_rar_set(adapter, i); + } +} + +void igb_sync_mac_table(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + for (i = 0; i < hw->mac.rar_entry_count; i++) { + if (adapter->mac_table[i].state & IGB_MAC_STATE_MODIFIED) + igb_rar_set(adapter, i); + adapter->mac_table[i].state &= ~(IGB_MAC_STATE_MODIFIED); + } +} + +int igb_available_rars(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i, count = 0; + + for (i = 0; i < hw->mac.rar_entry_count; i++) { + if (adapter->mac_table[i].state == 0) + count++; + } + return count; +} + +#ifdef HAVE_SET_RX_MODE +/** + * igb_write_uc_addr_list - write unicast addresses to RAR table + * @netdev: network interface device structure + * + * Writes unicast address list to the RAR table. + * Returns: -ENOMEM on failure/insufficient address space + * 0 on no addresses written + * X on writing X addresses to the RAR table + **/ +static int igb_write_uc_addr_list(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + unsigned int vfn = adapter->vfs_allocated_count; + int count = 0; + + /* return ENOMEM indicating insufficient memory for addresses */ + if (netdev_uc_count(netdev) > igb_available_rars(adapter)) + return -ENOMEM; + if (!netdev_uc_empty(netdev)) { +#ifdef NETDEV_HW_ADDR_T_UNICAST + struct netdev_hw_addr *ha; +#else + struct dev_mc_list *ha; +#endif + netdev_for_each_uc_addr(ha, netdev) { +#ifdef NETDEV_HW_ADDR_T_UNICAST + igb_del_mac_filter(adapter, ha->addr, vfn); + igb_add_mac_filter(adapter, ha->addr, vfn); +#else + igb_del_mac_filter(adapter, ha->da_addr, vfn); + igb_add_mac_filter(adapter, ha->da_addr, vfn); +#endif + count++; + } + } + return count; +} + +#endif /* HAVE_SET_RX_MODE */ +/** + * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_rx_mode entry point is called whenever the unicast or multicast + * address lists or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper unicast, multicast, + * promiscuous mode, and all-multi behavior. + **/ +static void igb_set_rx_mode(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + unsigned int vfn = adapter->vfs_allocated_count; + u32 rctl, vmolr = 0; + int count; + + /* Check for Promiscuous and All Multicast modes */ + rctl = E1000_READ_REG(hw, E1000_RCTL); + + /* clear the effected bits */ + rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE); + + if (netdev->flags & IFF_PROMISC) { + rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); + vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME); + /* retain VLAN HW filtering if in VT mode */ + if (adapter->vfs_allocated_count || adapter->vmdq_pools) + rctl |= E1000_RCTL_VFE; + } else { + if (netdev->flags & IFF_ALLMULTI) { + rctl |= E1000_RCTL_MPE; + vmolr |= E1000_VMOLR_MPME; + } else { + /* + * Write addresses to the MTA, if the attempt fails + * then we should just turn on promiscuous mode so + * that we can at least receive multicast traffic + */ + count = igb_write_mc_addr_list(netdev); + if (count < 0) { + rctl |= E1000_RCTL_MPE; + vmolr |= E1000_VMOLR_MPME; + } else if (count) { + vmolr |= E1000_VMOLR_ROMPE; + } + } +#ifdef HAVE_SET_RX_MODE + /* + * Write addresses to available RAR registers, if there is not + * sufficient space to store all the addresses then enable + * unicast promiscuous mode + */ + count = igb_write_uc_addr_list(netdev); + if (count < 0) { + rctl |= E1000_RCTL_UPE; + vmolr |= E1000_VMOLR_ROPE; + } +#endif /* HAVE_SET_RX_MODE */ + rctl |= E1000_RCTL_VFE; + } + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + + /* + * In order to support SR-IOV and eventually VMDq it is necessary to set + * the VMOLR to enable the appropriate modes. Without this workaround + * we will have issues with VLAN tag stripping not being done for frames + * that are only arriving because we are the default pool + */ + if (hw->mac.type < e1000_82576) + return; + + vmolr |= E1000_READ_REG(hw, E1000_VMOLR(vfn)) & + ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE); + E1000_WRITE_REG(hw, E1000_VMOLR(vfn), vmolr); + igb_restore_vf_multicasts(adapter); +} + +static void igb_check_wvbr(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 wvbr = 0; + + switch (hw->mac.type) { + case e1000_82576: + case e1000_i350: + if (!(wvbr = E1000_READ_REG(hw, E1000_WVBR))) + return; + break; + default: + break; + } + + adapter->wvbr |= wvbr; +} + +#define IGB_STAGGERED_QUEUE_OFFSET 8 + +static void igb_spoof_check(struct igb_adapter *adapter) +{ + int j; + + if (!adapter->wvbr) + return; + + switch (adapter->hw.mac.type) { + case e1000_82576: + for (j = 0; j < adapter->vfs_allocated_count; j++) { + if (adapter->wvbr & (1 << j) || + adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) { + DPRINTK(DRV, WARNING, + "Spoof event(s) detected on VF %d\n", j); + adapter->wvbr &= + ~((1 << j) | + (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))); + } + } + break; + case e1000_i350: + for (j = 0; j < adapter->vfs_allocated_count; j++) { + if (adapter->wvbr & (1 << j)) { + DPRINTK(DRV, WARNING, + "Spoof event(s) detected on VF %d\n", j); + adapter->wvbr &= ~(1 << j); + } + } + break; + default: + break; + } +} + +/* Need to wait a few seconds after link up to get diagnostic information from + * the phy */ +#ifdef HAVE_TIMER_SETUP +static void igb_update_phy_info(struct timer_list *t) +{ + struct igb_adapter *adapter = from_timer(adapter, t, phy_info_timer); +#else +static void igb_update_phy_info(unsigned long data) +{ + struct igb_adapter *adapter = (struct igb_adapter *) data; +#endif + e1000_get_phy_info(&adapter->hw); +} + +/** + * igb_has_link - check shared code for link and determine up/down + * @adapter: pointer to driver private info + **/ +bool igb_has_link(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + bool link_active = FALSE; + + /* get_link_status is set on LSC (link status) interrupt or + * rx sequence error interrupt. get_link_status will stay + * false until the e1000_check_for_link establishes link + * for copper adapters ONLY + */ + switch (hw->phy.media_type) { + case e1000_media_type_copper: + if (!hw->mac.get_link_status) + return true; + case e1000_media_type_internal_serdes: + e1000_check_for_link(hw); + link_active = !hw->mac.get_link_status; + break; + case e1000_media_type_unknown: + default: + break; + } + + if (((hw->mac.type == e1000_i210) || + (hw->mac.type == e1000_i211)) && + (hw->phy.id == I210_I_PHY_ID)) { + if (!netif_carrier_ok(adapter->netdev)) { + adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; + } else if (!(adapter->flags & IGB_FLAG_NEED_LINK_UPDATE)) { + adapter->flags |= IGB_FLAG_NEED_LINK_UPDATE; + adapter->link_check_timeout = jiffies; + } + } + + return link_active; +} + +/** + * igb_watchdog - Timer Call-back + * @data: pointer to adapter cast into an unsigned long + **/ +#ifdef HAVE_TIMER_SETUP +static void igb_watchdog(struct timer_list *t) +{ + struct igb_adapter *adapter = from_timer(adapter, t, watchdog_timer); +#else +static void igb_watchdog(unsigned long data) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; +#endif + /* Do the rest outside of interrupt context */ + schedule_work(&adapter->watchdog_task); +} + +static void igb_watchdog_task(struct work_struct *work) +{ + struct igb_adapter *adapter = container_of(work, + struct igb_adapter, + watchdog_task); + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 link; + int i; + u32 thstat, ctrl_ext; + u32 connsw; + + link = igb_has_link(adapter); + /* Force link down if we have fiber to swap to */ + if (adapter->flags & IGB_FLAG_MAS_ENABLE) { + if (hw->phy.media_type == e1000_media_type_copper) { + connsw = E1000_READ_REG(hw, E1000_CONNSW); + if (!(connsw & E1000_CONNSW_AUTOSENSE_EN)) + link = 0; + } + } + + if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE) { + if (time_after(jiffies, (adapter->link_check_timeout + HZ))) + adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; + else + link = FALSE; + } + + if (link) { + /* Perform a reset if the media type changed. */ + if (hw->dev_spec._82575.media_changed) { + hw->dev_spec._82575.media_changed = false; + adapter->flags |= IGB_FLAG_MEDIA_RESET; + igb_reset(adapter); + } + + /* Cancel scheduled suspend requests. */ + pm_runtime_resume(netdev->dev.parent); + + if (!netif_carrier_ok(netdev)) { + u32 ctrl; + e1000_get_speed_and_duplex(hw, + &adapter->link_speed, + &adapter->link_duplex); + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + /* Links status message must follow this format */ + printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, " + "Flow Control: %s\n", + netdev->name, + adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? + "Full Duplex" : "Half Duplex", + ((ctrl & E1000_CTRL_TFCE) && + (ctrl & E1000_CTRL_RFCE)) ? "RX/TX": + ((ctrl & E1000_CTRL_RFCE) ? "RX" : + ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None"))); + /* adjust timeout factor according to speed/duplex */ + adapter->tx_timeout_factor = 1; + switch (adapter->link_speed) { + case SPEED_10: + adapter->tx_timeout_factor = 14; + break; + case SPEED_100: + /* maybe add some timeout factor ? */ + break; + default: + break; + } + + netif_carrier_on(netdev); + netif_tx_wake_all_queues(netdev); + + igb_ping_all_vfs(adapter); +#ifdef IFLA_VF_MAX + igb_check_vf_rate_limit(adapter); +#endif /* IFLA_VF_MAX */ + + /* link state has changed, schedule phy info update */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->phy_info_timer, + round_jiffies(jiffies + 2 * HZ)); + } + } else { + if (netif_carrier_ok(netdev)) { + adapter->link_speed = 0; + adapter->link_duplex = 0; + /* check for thermal sensor event on i350 */ + if (hw->mac.type == e1000_i350) { + thstat = E1000_READ_REG(hw, E1000_THSTAT); + ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); + if ((hw->phy.media_type == + e1000_media_type_copper) && + !(ctrl_ext & + E1000_CTRL_EXT_LINK_MODE_SGMII)) { + if (thstat & E1000_THSTAT_PWR_DOWN) { + printk(KERN_ERR "igb: %s The " + "network adapter was stopped " + "because it overheated.\n", + netdev->name); + } + if (thstat & E1000_THSTAT_LINK_THROTTLE) { + printk(KERN_INFO + "igb: %s The network " + "adapter supported " + "link speed " + "was downshifted " + "because it " + "overheated.\n", + netdev->name); + } + } + } + + /* Links status message must follow this format */ + printk(KERN_INFO "igb: %s NIC Link is Down\n", + netdev->name); + netif_carrier_off(netdev); + netif_tx_stop_all_queues(netdev); + + igb_ping_all_vfs(adapter); + + /* link state has changed, schedule phy info update */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->phy_info_timer, + round_jiffies(jiffies + 2 * HZ)); + /* link is down, time to check for alternate media */ + if (adapter->flags & IGB_FLAG_MAS_ENABLE) { + igb_check_swap_media(adapter); + if (adapter->flags & IGB_FLAG_MEDIA_RESET) { + schedule_work(&adapter->reset_task); + /* return immediately */ + return; + } + } + pm_schedule_suspend(netdev->dev.parent, + MSEC_PER_SEC * 5); + + /* also check for alternate media here */ + } else if (!netif_carrier_ok(netdev) && + (adapter->flags & IGB_FLAG_MAS_ENABLE)) { + hw->mac.ops.power_up_serdes(hw); + igb_check_swap_media(adapter); + if (adapter->flags & IGB_FLAG_MEDIA_RESET) { + schedule_work(&adapter->reset_task); + /* return immediately */ + return; + } + } + } + + igb_update_stats(adapter); + + for (i = 0; i < adapter->num_tx_queues; i++) { + struct igb_ring *tx_ring = adapter->tx_ring[i]; + if (!netif_carrier_ok(netdev)) { + /* We've lost link, so the controller stops DMA, + * but we've got queued Tx work that's never going + * to get done, so reset controller to flush Tx. + * (Do the reset outside of interrupt context). */ + if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) { + adapter->tx_timeout_count++; + schedule_work(&adapter->reset_task); + /* return immediately since reset is imminent */ + return; + } + } + + /* Force detection of hung controller every watchdog period */ + set_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags); + } + + /* Cause software interrupt to ensure rx ring is cleaned */ + if (adapter->msix_entries) { + u32 eics = 0; + for (i = 0; i < adapter->num_q_vectors; i++) + eics |= adapter->q_vector[i]->eims_value; + E1000_WRITE_REG(hw, E1000_EICS, eics); + } else { + E1000_WRITE_REG(hw, E1000_ICS, E1000_ICS_RXDMT0); + } + + igb_spoof_check(adapter); + + /* Reset the timer */ + if (!test_bit(__IGB_DOWN, &adapter->state)) { + if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE) + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + HZ)); + else + mod_timer(&adapter->watchdog_timer, + round_jiffies(jiffies + 2 * HZ)); + } +} + +static void igb_dma_err_task(struct work_struct *work) +{ + struct igb_adapter *adapter = container_of(work, + struct igb_adapter, + dma_err_task); + int vf; + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 hgptc; + u32 ciaa, ciad; + + hgptc = E1000_READ_REG(hw, E1000_HGPTC); + if (hgptc) /* If incrementing then no need for the check below */ + goto dma_timer_reset; + /* + * Check to see if a bad DMA write target from an errant or + * malicious VF has caused a PCIe error. If so then we can + * issue a VFLR to the offending VF(s) and then resume without + * requesting a full slot reset. + */ + + for (vf = 0; vf < adapter->vfs_allocated_count; vf++) { + ciaa = (vf << 16) | 0x80000000; + /* 32 bit read so align, we really want status at offset 6 */ + ciaa |= PCI_COMMAND; + E1000_WRITE_REG(hw, E1000_CIAA, ciaa); + ciad = E1000_READ_REG(hw, E1000_CIAD); + ciaa &= 0x7FFFFFFF; + /* disable debug mode asap after reading data */ + E1000_WRITE_REG(hw, E1000_CIAA, ciaa); + /* Get the upper 16 bits which will be the PCI status reg */ + ciad >>= 16; + if (ciad & (PCI_STATUS_REC_MASTER_ABORT | + PCI_STATUS_REC_TARGET_ABORT | + PCI_STATUS_SIG_SYSTEM_ERROR)) { + netdev_err(netdev, "VF %d suffered error\n", vf); + /* Issue VFLR */ + ciaa = (vf << 16) | 0x80000000; + ciaa |= 0xA8; + E1000_WRITE_REG(hw, E1000_CIAA, ciaa); + ciad = 0x00008000; /* VFLR */ + E1000_WRITE_REG(hw, E1000_CIAD, ciad); + ciaa &= 0x7FFFFFFF; + E1000_WRITE_REG(hw, E1000_CIAA, ciaa); + } + } +dma_timer_reset: + /* Reset the timer */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->dma_err_timer, + round_jiffies(jiffies + HZ / 10)); +} + +/** + * igb_dma_err_timer - Timer Call-back + * @data: pointer to adapter cast into an unsigned long + **/ +#ifdef HAVE_TIMER_SETUP +static void igb_dma_err_timer(struct timer_list *t) +{ + struct igb_adapter *adapter = from_timer(adapter, t, dma_err_timer); +#else +static void igb_dma_err_timer(unsigned long data) +{ + struct igb_adapter *adapter = (struct igb_adapter *)data; +#endif + /* Do the rest outside of interrupt context */ + schedule_work(&adapter->dma_err_task); +} + +enum latency_range { + lowest_latency = 0, + low_latency = 1, + bulk_latency = 2, + latency_invalid = 255 +}; + +/** + * igb_update_ring_itr - update the dynamic ITR value based on packet size + * + * Stores a new ITR value based on strictly on packet size. This + * algorithm is less sophisticated than that used in igb_update_itr, + * due to the difficulty of synchronizing statistics across multiple + * receive rings. The divisors and thresholds used by this function + * were determined based on theoretical maximum wire speed and testing + * data, in order to minimize response time while increasing bulk + * throughput. + * This functionality is controlled by the InterruptThrottleRate module + * parameter (see igb_param.c) + * NOTE: This function is called only when operating in a multiqueue + * receive environment. + * @q_vector: pointer to q_vector + **/ +static void igb_update_ring_itr(struct igb_q_vector *q_vector) +{ + int new_val = q_vector->itr_val; + int avg_wire_size = 0; + struct igb_adapter *adapter = q_vector->adapter; + unsigned int packets; + + /* For non-gigabit speeds, just fix the interrupt rate at 4000 + * ints/sec - ITR timer value of 120 ticks. + */ + switch (adapter->link_speed) { + case SPEED_10: + case SPEED_100: + new_val = IGB_4K_ITR; + goto set_itr_val; + default: + break; + } + + packets = q_vector->rx.total_packets; + if (packets) + avg_wire_size = q_vector->rx.total_bytes / packets; + + packets = q_vector->tx.total_packets; + if (packets) + avg_wire_size = max_t(u32, avg_wire_size, + q_vector->tx.total_bytes / packets); + + /* if avg_wire_size isn't set no work was done */ + if (!avg_wire_size) + goto clear_counts; + + /* Add 24 bytes to size to account for CRC, preamble, and gap */ + avg_wire_size += 24; + + /* Don't starve jumbo frames */ + avg_wire_size = min(avg_wire_size, 3000); + + /* Give a little boost to mid-size frames */ + if ((avg_wire_size > 300) && (avg_wire_size < 1200)) + new_val = avg_wire_size / 3; + else + new_val = avg_wire_size / 2; + + /* conservative mode (itr 3) eliminates the lowest_latency setting */ + if (new_val < IGB_20K_ITR && + ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || + (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) + new_val = IGB_20K_ITR; + +set_itr_val: + if (new_val != q_vector->itr_val) { + q_vector->itr_val = new_val; + q_vector->set_itr = 1; + } +clear_counts: + q_vector->rx.total_bytes = 0; + q_vector->rx.total_packets = 0; + q_vector->tx.total_bytes = 0; + q_vector->tx.total_packets = 0; +} + +/** + * igb_update_itr - update the dynamic ITR value based on statistics + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. + * this functionality is controlled by the InterruptThrottleRate module + * parameter (see igb_param.c) + * NOTE: These calculations are only valid when operating in a single- + * queue environment. + * @q_vector: pointer to q_vector + * @ring_container: ring info to update the itr for + **/ +static void igb_update_itr(struct igb_q_vector *q_vector, + struct igb_ring_container *ring_container) +{ + unsigned int packets = ring_container->total_packets; + unsigned int bytes = ring_container->total_bytes; + u8 itrval = ring_container->itr; + + /* no packets, exit with status unchanged */ + if (packets == 0) + return; + + switch (itrval) { + case lowest_latency: + /* handle TSO and jumbo frames */ + if (bytes/packets > 8000) + itrval = bulk_latency; + else if ((packets < 5) && (bytes > 512)) + itrval = low_latency; + break; + case low_latency: /* 50 usec aka 20000 ints/s */ + if (bytes > 10000) { + /* this if handles the TSO accounting */ + if (bytes/packets > 8000) { + itrval = bulk_latency; + } else if ((packets < 10) || ((bytes/packets) > 1200)) { + itrval = bulk_latency; + } else if (packets > 35) { + itrval = lowest_latency; + } + } else if (bytes/packets > 2000) { + itrval = bulk_latency; + } else if (packets <= 2 && bytes < 512) { + itrval = lowest_latency; + } + break; + case bulk_latency: /* 250 usec aka 4000 ints/s */ + if (bytes > 25000) { + if (packets > 35) + itrval = low_latency; + } else if (bytes < 1500) { + itrval = low_latency; + } + break; + } + + /* clear work counters since we have the values we need */ + ring_container->total_bytes = 0; + ring_container->total_packets = 0; + + /* write updated itr to ring container */ + ring_container->itr = itrval; +} + +static void igb_set_itr(struct igb_q_vector *q_vector) +{ + struct igb_adapter *adapter = q_vector->adapter; + u32 new_itr = q_vector->itr_val; + u8 current_itr = 0; + + /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ + switch (adapter->link_speed) { + case SPEED_10: + case SPEED_100: + current_itr = 0; + new_itr = IGB_4K_ITR; + goto set_itr_now; + default: + break; + } + + igb_update_itr(q_vector, &q_vector->tx); + igb_update_itr(q_vector, &q_vector->rx); + + current_itr = max(q_vector->rx.itr, q_vector->tx.itr); + + /* conservative mode (itr 3) eliminates the lowest_latency setting */ + if (current_itr == lowest_latency && + ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || + (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) + current_itr = low_latency; + + switch (current_itr) { + /* counts and packets in update_itr are dependent on these numbers */ + case lowest_latency: + new_itr = IGB_70K_ITR; /* 70,000 ints/sec */ + break; + case low_latency: + new_itr = IGB_20K_ITR; /* 20,000 ints/sec */ + break; + case bulk_latency: + new_itr = IGB_4K_ITR; /* 4,000 ints/sec */ + break; + default: + break; + } + +set_itr_now: + if (new_itr != q_vector->itr_val) { + /* this attempts to bias the interrupt rate towards Bulk + * by adding intermediate steps when interrupt rate is + * increasing */ + new_itr = new_itr > q_vector->itr_val ? + max((new_itr * q_vector->itr_val) / + (new_itr + (q_vector->itr_val >> 2)), + new_itr) : + new_itr; + /* Don't write the value here; it resets the adapter's + * internal timer, and causes us to delay far longer than + * we should between interrupts. Instead, we write the ITR + * value at the beginning of the next interrupt so the timing + * ends up being correct. + */ + q_vector->itr_val = new_itr; + q_vector->set_itr = 1; + } +} + +void igb_tx_ctxtdesc(struct igb_ring *tx_ring, u32 vlan_macip_lens, + u32 type_tucmd, u32 mss_l4len_idx) +{ + struct e1000_adv_tx_context_desc *context_desc; + u16 i = tx_ring->next_to_use; + + context_desc = IGB_TX_CTXTDESC(tx_ring, i); + + i++; + tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; + + /* set bits to identify this as an advanced context descriptor */ + type_tucmd |= E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT; + + /* For 82575, context index must be unique per ring. */ + if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags)) + mss_l4len_idx |= tx_ring->reg_idx << 4; + + context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens); + context_desc->seqnum_seed = 0; + context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd); + context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); +} + +static int igb_tso(struct igb_ring *tx_ring, + struct igb_tx_buffer *first, + u8 *hdr_len) +{ +#ifdef NETIF_F_TSO + struct sk_buff *skb = first->skb; + u32 vlan_macip_lens, type_tucmd; + u32 mss_l4len_idx, l4len; + + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; + + if (!skb_is_gso(skb)) +#endif /* NETIF_F_TSO */ + return 0; +#ifdef NETIF_F_TSO + + if (skb_header_cloned(skb)) { + int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (err) + return err; + } + + /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ + type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP; + + if (first->protocol == __constant_htons(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + iph->tot_len = 0; + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, 0, + IPPROTO_TCP, + 0); + type_tucmd |= E1000_ADVTXD_TUCMD_IPV4; + first->tx_flags |= IGB_TX_FLAGS_TSO | + IGB_TX_FLAGS_CSUM | + IGB_TX_FLAGS_IPV4; +#ifdef NETIF_F_TSO6 + } else if (skb_is_gso_v6(skb)) { + ipv6_hdr(skb)->payload_len = 0; + tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + first->tx_flags |= IGB_TX_FLAGS_TSO | + IGB_TX_FLAGS_CSUM; +#endif + } + + /* compute header lengths */ + l4len = tcp_hdrlen(skb); + *hdr_len = skb_transport_offset(skb) + l4len; + + /* update gso size and bytecount with header size */ + first->gso_segs = skb_shinfo(skb)->gso_segs; + first->bytecount += (first->gso_segs - 1) * *hdr_len; + + /* MSS L4LEN IDX */ + mss_l4len_idx = l4len << E1000_ADVTXD_L4LEN_SHIFT; + mss_l4len_idx |= skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT; + + /* VLAN MACLEN IPLEN */ + vlan_macip_lens = skb_network_header_len(skb); + vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT; + vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK; + + igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx); + + return 1; +#endif /* NETIF_F_TSO */ +} + +static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first) +{ + struct sk_buff *skb = first->skb; + u32 vlan_macip_lens = 0; + u32 mss_l4len_idx = 0; + u32 type_tucmd = 0; + + if (skb->ip_summed != CHECKSUM_PARTIAL) { + if (!(first->tx_flags & IGB_TX_FLAGS_VLAN)) + return; + } else { + u8 nexthdr = 0; + switch (first->protocol) { + case __constant_htons(ETH_P_IP): + vlan_macip_lens |= skb_network_header_len(skb); + type_tucmd |= E1000_ADVTXD_TUCMD_IPV4; + nexthdr = ip_hdr(skb)->protocol; + break; +#ifdef NETIF_F_IPV6_CSUM + case __constant_htons(ETH_P_IPV6): + vlan_macip_lens |= skb_network_header_len(skb); + nexthdr = ipv6_hdr(skb)->nexthdr; + break; +#endif + default: + if (unlikely(net_ratelimit())) { + dev_warn(tx_ring->dev, + "partial checksum but proto=%x!\n", + first->protocol); + } + break; + } + + switch (nexthdr) { + case IPPROTO_TCP: + type_tucmd |= E1000_ADVTXD_TUCMD_L4T_TCP; + mss_l4len_idx = tcp_hdrlen(skb) << + E1000_ADVTXD_L4LEN_SHIFT; + break; +#ifdef HAVE_SCTP + case IPPROTO_SCTP: + type_tucmd |= E1000_ADVTXD_TUCMD_L4T_SCTP; + mss_l4len_idx = sizeof(struct sctphdr) << + E1000_ADVTXD_L4LEN_SHIFT; + break; +#endif + case IPPROTO_UDP: + mss_l4len_idx = sizeof(struct udphdr) << + E1000_ADVTXD_L4LEN_SHIFT; + break; + default: + if (unlikely(net_ratelimit())) { + dev_warn(tx_ring->dev, + "partial checksum but l4 proto=%x!\n", + nexthdr); + } + break; + } + + /* update TX checksum flag */ + first->tx_flags |= IGB_TX_FLAGS_CSUM; + } + + vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT; + vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK; + + igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx); +} + +#define IGB_SET_FLAG(_input, _flag, _result) \ + ((_flag <= _result) ? \ + ((u32)(_input & _flag) * (_result / _flag)) : \ + ((u32)(_input & _flag) / (_flag / _result))) + +static u32 igb_tx_cmd_type(struct sk_buff *skb, u32 tx_flags) +{ + /* set type for advanced descriptor with frame checksum insertion */ + u32 cmd_type = E1000_ADVTXD_DTYP_DATA | + E1000_ADVTXD_DCMD_DEXT | + E1000_ADVTXD_DCMD_IFCS; + + /* set HW vlan bit if vlan is present */ + cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_VLAN, + (E1000_ADVTXD_DCMD_VLE)); + + /* set segmentation bits for TSO */ + cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSO, + (E1000_ADVTXD_DCMD_TSE)); + + /* set timestamp bit if present */ + cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSTAMP, + (E1000_ADVTXD_MAC_TSTAMP)); + + return cmd_type; +} + +static void igb_tx_olinfo_status(struct igb_ring *tx_ring, + union e1000_adv_tx_desc *tx_desc, + u32 tx_flags, unsigned int paylen) +{ + u32 olinfo_status = paylen << E1000_ADVTXD_PAYLEN_SHIFT; + + /* 82575 requires a unique index per ring */ + if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags)) + olinfo_status |= tx_ring->reg_idx << 4; + + /* insert L4 checksum */ + olinfo_status |= IGB_SET_FLAG(tx_flags, + IGB_TX_FLAGS_CSUM, + (E1000_TXD_POPTS_TXSM << 8)); + + /* insert IPv4 checksum */ + olinfo_status |= IGB_SET_FLAG(tx_flags, + IGB_TX_FLAGS_IPV4, + (E1000_TXD_POPTS_IXSM << 8)); + + tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); +} + +static void igb_tx_map(struct igb_ring *tx_ring, + struct igb_tx_buffer *first, + const u8 hdr_len) +{ + struct sk_buff *skb = first->skb; + struct igb_tx_buffer *tx_buffer; + union e1000_adv_tx_desc *tx_desc; + struct skb_frag_struct *frag; + dma_addr_t dma; + unsigned int data_len, size; + u32 tx_flags = first->tx_flags; + u32 cmd_type = igb_tx_cmd_type(skb, tx_flags); + u16 i = tx_ring->next_to_use; + + tx_desc = IGB_TX_DESC(tx_ring, i); + + igb_tx_olinfo_status(tx_ring, tx_desc, tx_flags, skb->len - hdr_len); + + size = skb_headlen(skb); + data_len = skb->data_len; + + dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); + + tx_buffer = first; + + for (frag = &skb_shinfo(skb)->frags[0];; frag++) { + if (dma_mapping_error(tx_ring->dev, dma)) + goto dma_error; + + /* record length, and DMA address */ + dma_unmap_len_set(tx_buffer, len, size); + dma_unmap_addr_set(tx_buffer, dma, dma); + + tx_desc->read.buffer_addr = cpu_to_le64(dma); + + while (unlikely(size > IGB_MAX_DATA_PER_TXD)) { + tx_desc->read.cmd_type_len = + cpu_to_le32(cmd_type ^ IGB_MAX_DATA_PER_TXD); + + i++; + tx_desc++; + if (i == tx_ring->count) { + tx_desc = IGB_TX_DESC(tx_ring, 0); + i = 0; + } + tx_desc->read.olinfo_status = 0; + + dma += IGB_MAX_DATA_PER_TXD; + size -= IGB_MAX_DATA_PER_TXD; + + tx_desc->read.buffer_addr = cpu_to_le64(dma); + } + + if (likely(!data_len)) + break; + + tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size); + + i++; + tx_desc++; + if (i == tx_ring->count) { + tx_desc = IGB_TX_DESC(tx_ring, 0); + i = 0; + } + tx_desc->read.olinfo_status = 0; + + size = skb_frag_size(frag); + data_len -= size; + + dma = skb_frag_dma_map(tx_ring->dev, frag, 0, + size, DMA_TO_DEVICE); + + tx_buffer = &tx_ring->tx_buffer_info[i]; + } + + /* write last descriptor with RS and EOP bits */ + cmd_type |= size | IGB_TXD_DCMD; + tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type); + + netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); + /* set the timestamp */ + first->time_stamp = jiffies; + + /* + * Force memory writes to complete before letting h/w know there + * are new descriptors to fetch. (Only applicable for weak-ordered + * memory model archs, such as IA-64). + * + * We also need this memory barrier to make certain all of the + * status bits have been updated before next_to_watch is written. + */ + wmb(); + + /* set next_to_watch value indicating a packet is present */ + first->next_to_watch = tx_desc; + + i++; + if (i == tx_ring->count) + i = 0; + + tx_ring->next_to_use = i; + + writel(i, tx_ring->tail); + + /* we need this if more than one processor can write to our tail + * at a time, it syncronizes IO on IA64/Altix systems */ + mmiowb(); + + return; + +dma_error: + dev_err(tx_ring->dev, "TX DMA map failed\n"); + + /* clear dma mappings for failed tx_buffer_info map */ + for (;;) { + tx_buffer = &tx_ring->tx_buffer_info[i]; + igb_unmap_and_free_tx_resource(tx_ring, tx_buffer); + if (tx_buffer == first) + break; + if (i == 0) + i = tx_ring->count; + i--; + } + + tx_ring->next_to_use = i; +} + +static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size) +{ + struct net_device *netdev = netdev_ring(tx_ring); + + if (netif_is_multiqueue(netdev)) + netif_stop_subqueue(netdev, ring_queue_index(tx_ring)); + else + netif_stop_queue(netdev); + + /* Herbert's original patch had: + * smp_mb__after_netif_stop_queue(); + * but since that doesn't exist yet, just open code it. */ + smp_mb(); + + /* We need to check again in a case another CPU has just + * made room available. */ + if (igb_desc_unused(tx_ring) < size) + return -EBUSY; + + /* A reprieve! */ + if (netif_is_multiqueue(netdev)) + netif_wake_subqueue(netdev, ring_queue_index(tx_ring)); + else + netif_wake_queue(netdev); + + tx_ring->tx_stats.restart_queue++; + + return 0; +} + +static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size) +{ + if (igb_desc_unused(tx_ring) >= size) + return 0; + return __igb_maybe_stop_tx(tx_ring, size); +} + +netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb, + struct igb_ring *tx_ring) +{ + struct igb_tx_buffer *first; + int tso; + u32 tx_flags = 0; +#if PAGE_SIZE > IGB_MAX_DATA_PER_TXD + unsigned short f; +#endif + u16 count = TXD_USE_COUNT(skb_headlen(skb)); + __be16 protocol = vlan_get_protocol(skb); + u8 hdr_len = 0; + + /* + * need: 1 descriptor per page * PAGE_SIZE/IGB_MAX_DATA_PER_TXD, + * + 1 desc for skb_headlen/IGB_MAX_DATA_PER_TXD, + * + 2 desc gap to keep tail from touching head, + * + 1 desc for context descriptor, + * otherwise try next time + */ +#if PAGE_SIZE > IGB_MAX_DATA_PER_TXD + for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) + count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); +#else + count += skb_shinfo(skb)->nr_frags; +#endif + if (igb_maybe_stop_tx(tx_ring, count + 3)) { + /* this is a hard error */ + return NETDEV_TX_BUSY; + } + + /* record the location of the first descriptor for this packet */ + first = &tx_ring->tx_buffer_info[tx_ring->next_to_use]; + first->skb = skb; + first->bytecount = skb->len; + first->gso_segs = 1; + + skb_tx_timestamp(skb); + +#ifdef HAVE_PTP_1588_CLOCK + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) { + struct igb_adapter *adapter = netdev_priv(tx_ring->netdev); + if (!adapter->ptp_tx_skb) { + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + tx_flags |= IGB_TX_FLAGS_TSTAMP; + + adapter->ptp_tx_skb = skb_get(skb); + adapter->ptp_tx_start = jiffies; + if (adapter->hw.mac.type == e1000_82576) + schedule_work(&adapter->ptp_tx_work); + } + } +#endif /* HAVE_PTP_1588_CLOCK */ + + if (vlan_tx_tag_present(skb)) { + tx_flags |= IGB_TX_FLAGS_VLAN; + tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT); + } + + /* record initial flags and protocol */ + first->tx_flags = tx_flags; + first->protocol = protocol; + + tso = igb_tso(tx_ring, first, &hdr_len); + if (tso < 0) + goto out_drop; + else if (!tso) + igb_tx_csum(tx_ring, first); + + igb_tx_map(tx_ring, first, hdr_len); + +#ifndef HAVE_TRANS_START_IN_QUEUE + netdev_ring(tx_ring)->trans_start = jiffies; + +#endif + /* Make sure there is space in the ring for the next send. */ + igb_maybe_stop_tx(tx_ring, DESC_NEEDED); + + return NETDEV_TX_OK; + +out_drop: + igb_unmap_and_free_tx_resource(tx_ring, first); + + return NETDEV_TX_OK; +} + +#ifdef HAVE_TX_MQ +static inline struct igb_ring *igb_tx_queue_mapping(struct igb_adapter *adapter, + struct sk_buff *skb) +{ + unsigned int r_idx = skb->queue_mapping; + + if (r_idx >= adapter->num_tx_queues) + r_idx = r_idx % adapter->num_tx_queues; + + return adapter->tx_ring[r_idx]; +} +#else +#define igb_tx_queue_mapping(_adapter, _skb) (_adapter)->tx_ring[0] +#endif + +static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, + struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + if (test_bit(__IGB_DOWN, &adapter->state)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + if (skb->len <= 0) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + /* + * The minimum packet size with TCTL.PSP set is 17 so pad the skb + * in order to meet this minimum size requirement. + */ + if (skb->len < 17) { + if (skb_padto(skb, 17)) + return NETDEV_TX_OK; + skb->len = 17; + } + + return igb_xmit_frame_ring(skb, igb_tx_queue_mapping(adapter, skb)); +} + +/** + * igb_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + **/ +static void igb_tx_timeout(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + /* Do the reset outside of interrupt context */ + adapter->tx_timeout_count++; + + if (hw->mac.type >= e1000_82580) + hw->dev_spec._82575.global_device_reset = true; + + schedule_work(&adapter->reset_task); + E1000_WRITE_REG(hw, E1000_EICS, + (adapter->eims_enable_mask & ~adapter->eims_other)); +} + +static void igb_reset_task(struct work_struct *work) +{ + struct igb_adapter *adapter; + adapter = container_of(work, struct igb_adapter, reset_task); + + igb_reinit_locked(adapter); +} + +/** + * igb_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are updated here and also from the timer callback. + **/ +static struct net_device_stats *igb_get_stats(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + + if (!test_bit(__IGB_RESETTING, &adapter->state)) + igb_update_stats(adapter); + +#ifdef HAVE_NETDEV_STATS_IN_NETDEV + /* only return the current stats */ + return &netdev->stats; +#else + /* only return the current stats */ + return &adapter->net_stats; +#endif /* HAVE_NETDEV_STATS_IN_NETDEV */ +} + +/** + * igb_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + **/ +static int igb_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; + + if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { + dev_err(pci_dev_to_dev(pdev), "Invalid MTU setting\n"); + return -EINVAL; + } + +#define MAX_STD_JUMBO_FRAME_SIZE 9238 + if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { + dev_err(pci_dev_to_dev(pdev), "MTU > 9216 not supported.\n"); + return -EINVAL; + } + + /* adjust max frame to be at least the size of a standard frame */ + if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN)) + max_frame = ETH_FRAME_LEN + ETH_FCS_LEN; + + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + + /* igb_down has a dependency on max_frame_size */ + adapter->max_frame_size = max_frame; + + if (netif_running(netdev)) + igb_down(adapter); + + dev_info(pci_dev_to_dev(pdev), "changing MTU from %d to %d\n", + netdev->mtu, new_mtu); + netdev->mtu = new_mtu; + hw->dev_spec._82575.mtu = new_mtu; + + if (netif_running(netdev)) + igb_up(adapter); + else + igb_reset(adapter); + + clear_bit(__IGB_RESETTING, &adapter->state); + + return 0; +} + +/** + * igb_update_stats - Update the board statistics counters + * @adapter: board private structure + **/ + +void igb_update_stats(struct igb_adapter *adapter) +{ +#ifdef HAVE_NETDEV_STATS_IN_NETDEV + struct net_device_stats *net_stats = &adapter->netdev->stats; +#else + struct net_device_stats *net_stats = &adapter->net_stats; +#endif /* HAVE_NETDEV_STATS_IN_NETDEV */ + struct e1000_hw *hw = &adapter->hw; +#ifdef HAVE_PCI_ERS + struct pci_dev *pdev = adapter->pdev; +#endif + u32 reg, mpc; + u16 phy_tmp; + int i; + u64 bytes, packets; +#ifndef IGB_NO_LRO + u32 flushed = 0, coal = 0; + struct igb_q_vector *q_vector; +#endif + +#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF + + /* + * Prevent stats update while adapter is being reset, or if the pci + * connection is down. + */ + if (adapter->link_speed == 0) + return; +#ifdef HAVE_PCI_ERS + if (pci_channel_offline(pdev)) + return; + +#endif +#ifndef IGB_NO_LRO + for (i = 0; i < adapter->num_q_vectors; i++) { + q_vector = adapter->q_vector[i]; + if (!q_vector) + continue; + flushed += q_vector->lrolist.stats.flushed; + coal += q_vector->lrolist.stats.coal; + } + adapter->lro_stats.flushed = flushed; + adapter->lro_stats.coal = coal; + +#endif + bytes = 0; + packets = 0; + for (i = 0; i < adapter->num_rx_queues; i++) { + u32 rqdpc_tmp = E1000_READ_REG(hw, E1000_RQDPC(i)) & 0x0FFF; + struct igb_ring *ring = adapter->rx_ring[i]; + ring->rx_stats.drops += rqdpc_tmp; + net_stats->rx_fifo_errors += rqdpc_tmp; +#ifdef CONFIG_IGB_VMDQ_NETDEV + if (!ring->vmdq_netdev) { + bytes += ring->rx_stats.bytes; + packets += ring->rx_stats.packets; + } +#else + bytes += ring->rx_stats.bytes; + packets += ring->rx_stats.packets; +#endif + } + + net_stats->rx_bytes = bytes; + net_stats->rx_packets = packets; + + bytes = 0; + packets = 0; + for (i = 0; i < adapter->num_tx_queues; i++) { + struct igb_ring *ring = adapter->tx_ring[i]; +#ifdef CONFIG_IGB_VMDQ_NETDEV + if (!ring->vmdq_netdev) { + bytes += ring->tx_stats.bytes; + packets += ring->tx_stats.packets; + } +#else + bytes += ring->tx_stats.bytes; + packets += ring->tx_stats.packets; +#endif + } + net_stats->tx_bytes = bytes; + net_stats->tx_packets = packets; + + /* read stats registers */ + adapter->stats.crcerrs += E1000_READ_REG(hw, E1000_CRCERRS); + adapter->stats.gprc += E1000_READ_REG(hw, E1000_GPRC); + adapter->stats.gorc += E1000_READ_REG(hw, E1000_GORCL); + E1000_READ_REG(hw, E1000_GORCH); /* clear GORCL */ + adapter->stats.bprc += E1000_READ_REG(hw, E1000_BPRC); + adapter->stats.mprc += E1000_READ_REG(hw, E1000_MPRC); + adapter->stats.roc += E1000_READ_REG(hw, E1000_ROC); + + adapter->stats.prc64 += E1000_READ_REG(hw, E1000_PRC64); + adapter->stats.prc127 += E1000_READ_REG(hw, E1000_PRC127); + adapter->stats.prc255 += E1000_READ_REG(hw, E1000_PRC255); + adapter->stats.prc511 += E1000_READ_REG(hw, E1000_PRC511); + adapter->stats.prc1023 += E1000_READ_REG(hw, E1000_PRC1023); + adapter->stats.prc1522 += E1000_READ_REG(hw, E1000_PRC1522); + adapter->stats.symerrs += E1000_READ_REG(hw, E1000_SYMERRS); + adapter->stats.sec += E1000_READ_REG(hw, E1000_SEC); + + mpc = E1000_READ_REG(hw, E1000_MPC); + adapter->stats.mpc += mpc; + net_stats->rx_fifo_errors += mpc; + adapter->stats.scc += E1000_READ_REG(hw, E1000_SCC); + adapter->stats.ecol += E1000_READ_REG(hw, E1000_ECOL); + adapter->stats.mcc += E1000_READ_REG(hw, E1000_MCC); + adapter->stats.latecol += E1000_READ_REG(hw, E1000_LATECOL); + adapter->stats.dc += E1000_READ_REG(hw, E1000_DC); + adapter->stats.rlec += E1000_READ_REG(hw, E1000_RLEC); + adapter->stats.xonrxc += E1000_READ_REG(hw, E1000_XONRXC); + adapter->stats.xontxc += E1000_READ_REG(hw, E1000_XONTXC); + adapter->stats.xoffrxc += E1000_READ_REG(hw, E1000_XOFFRXC); + adapter->stats.xofftxc += E1000_READ_REG(hw, E1000_XOFFTXC); + adapter->stats.fcruc += E1000_READ_REG(hw, E1000_FCRUC); + adapter->stats.gptc += E1000_READ_REG(hw, E1000_GPTC); + adapter->stats.gotc += E1000_READ_REG(hw, E1000_GOTCL); + E1000_READ_REG(hw, E1000_GOTCH); /* clear GOTCL */ + adapter->stats.rnbc += E1000_READ_REG(hw, E1000_RNBC); + adapter->stats.ruc += E1000_READ_REG(hw, E1000_RUC); + adapter->stats.rfc += E1000_READ_REG(hw, E1000_RFC); + adapter->stats.rjc += E1000_READ_REG(hw, E1000_RJC); + adapter->stats.tor += E1000_READ_REG(hw, E1000_TORH); + adapter->stats.tot += E1000_READ_REG(hw, E1000_TOTH); + adapter->stats.tpr += E1000_READ_REG(hw, E1000_TPR); + + adapter->stats.ptc64 += E1000_READ_REG(hw, E1000_PTC64); + adapter->stats.ptc127 += E1000_READ_REG(hw, E1000_PTC127); + adapter->stats.ptc255 += E1000_READ_REG(hw, E1000_PTC255); + adapter->stats.ptc511 += E1000_READ_REG(hw, E1000_PTC511); + adapter->stats.ptc1023 += E1000_READ_REG(hw, E1000_PTC1023); + adapter->stats.ptc1522 += E1000_READ_REG(hw, E1000_PTC1522); + + adapter->stats.mptc += E1000_READ_REG(hw, E1000_MPTC); + adapter->stats.bptc += E1000_READ_REG(hw, E1000_BPTC); + + adapter->stats.tpt += E1000_READ_REG(hw, E1000_TPT); + adapter->stats.colc += E1000_READ_REG(hw, E1000_COLC); + + adapter->stats.algnerrc += E1000_READ_REG(hw, E1000_ALGNERRC); + /* read internal phy sepecific stats */ + reg = E1000_READ_REG(hw, E1000_CTRL_EXT); + if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) { + adapter->stats.rxerrc += E1000_READ_REG(hw, E1000_RXERRC); + + /* this stat has invalid values on i210/i211 */ + if ((hw->mac.type != e1000_i210) && + (hw->mac.type != e1000_i211)) + adapter->stats.tncrs += E1000_READ_REG(hw, E1000_TNCRS); + } + adapter->stats.tsctc += E1000_READ_REG(hw, E1000_TSCTC); + adapter->stats.tsctfc += E1000_READ_REG(hw, E1000_TSCTFC); + + adapter->stats.iac += E1000_READ_REG(hw, E1000_IAC); + adapter->stats.icrxoc += E1000_READ_REG(hw, E1000_ICRXOC); + adapter->stats.icrxptc += E1000_READ_REG(hw, E1000_ICRXPTC); + adapter->stats.icrxatc += E1000_READ_REG(hw, E1000_ICRXATC); + adapter->stats.ictxptc += E1000_READ_REG(hw, E1000_ICTXPTC); + adapter->stats.ictxatc += E1000_READ_REG(hw, E1000_ICTXATC); + adapter->stats.ictxqec += E1000_READ_REG(hw, E1000_ICTXQEC); + adapter->stats.ictxqmtc += E1000_READ_REG(hw, E1000_ICTXQMTC); + adapter->stats.icrxdmtc += E1000_READ_REG(hw, E1000_ICRXDMTC); + + /* Fill out the OS statistics structure */ + net_stats->multicast = adapter->stats.mprc; + net_stats->collisions = adapter->stats.colc; + + /* Rx Errors */ + + /* RLEC on some newer hardware can be incorrect so build + * our own version based on RUC and ROC */ + net_stats->rx_errors = adapter->stats.rxerrc + + adapter->stats.crcerrs + adapter->stats.algnerrc + + adapter->stats.ruc + adapter->stats.roc + + adapter->stats.cexterr; + net_stats->rx_length_errors = adapter->stats.ruc + + adapter->stats.roc; + net_stats->rx_crc_errors = adapter->stats.crcerrs; + net_stats->rx_frame_errors = adapter->stats.algnerrc; + net_stats->rx_missed_errors = adapter->stats.mpc; + + /* Tx Errors */ + net_stats->tx_errors = adapter->stats.ecol + + adapter->stats.latecol; + net_stats->tx_aborted_errors = adapter->stats.ecol; + net_stats->tx_window_errors = adapter->stats.latecol; + net_stats->tx_carrier_errors = adapter->stats.tncrs; + + /* Tx Dropped needs to be maintained elsewhere */ + + /* Phy Stats */ + if (hw->phy.media_type == e1000_media_type_copper) { + if ((adapter->link_speed == SPEED_1000) && + (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) { + phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; + adapter->phy_stats.idle_errors += phy_tmp; + } + } + + /* Management Stats */ + adapter->stats.mgptc += E1000_READ_REG(hw, E1000_MGTPTC); + adapter->stats.mgprc += E1000_READ_REG(hw, E1000_MGTPRC); + if (hw->mac.type > e1000_82580) { + adapter->stats.o2bgptc += E1000_READ_REG(hw, E1000_O2BGPTC); + adapter->stats.o2bspc += E1000_READ_REG(hw, E1000_O2BSPC); + adapter->stats.b2ospc += E1000_READ_REG(hw, E1000_B2OSPC); + adapter->stats.b2ogprc += E1000_READ_REG(hw, E1000_B2OGPRC); + } +} + +static irqreturn_t igb_msix_other(int irq, void *data) +{ + struct igb_adapter *adapter = data; + struct e1000_hw *hw = &adapter->hw; + u32 icr = E1000_READ_REG(hw, E1000_ICR); + /* reading ICR causes bit 31 of EICR to be cleared */ + + if (icr & E1000_ICR_DRSTA) + schedule_work(&adapter->reset_task); + + if (icr & E1000_ICR_DOUTSYNC) { + /* HW is reporting DMA is out of sync */ + adapter->stats.doosync++; + /* The DMA Out of Sync is also indication of a spoof event + * in IOV mode. Check the Wrong VM Behavior register to + * see if it is really a spoof event. */ + igb_check_wvbr(adapter); + } + + /* Check for a mailbox event */ + if (icr & E1000_ICR_VMMB) + igb_msg_task(adapter); + + if (icr & E1000_ICR_LSC) { + hw->mac.get_link_status = 1; + /* guard against interrupt when we're going down */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + +#ifdef HAVE_PTP_1588_CLOCK + if (icr & E1000_ICR_TS) { + u32 tsicr = E1000_READ_REG(hw, E1000_TSICR); + + if (tsicr & E1000_TSICR_TXTS) { + /* acknowledge the interrupt */ + E1000_WRITE_REG(hw, E1000_TSICR, E1000_TSICR_TXTS); + /* retrieve hardware timestamp */ + schedule_work(&adapter->ptp_tx_work); + } + } +#endif /* HAVE_PTP_1588_CLOCK */ + + /* Check for MDD event */ + if (icr & E1000_ICR_MDDET) + igb_process_mdd_event(adapter); + + E1000_WRITE_REG(hw, E1000_EIMS, adapter->eims_other); + + return IRQ_HANDLED; +} + +static void igb_write_itr(struct igb_q_vector *q_vector) +{ + struct igb_adapter *adapter = q_vector->adapter; + u32 itr_val = q_vector->itr_val & 0x7FFC; + + if (!q_vector->set_itr) + return; + + if (!itr_val) + itr_val = 0x4; + + if (adapter->hw.mac.type == e1000_82575) + itr_val |= itr_val << 16; + else + itr_val |= E1000_EITR_CNT_IGNR; + + writel(itr_val, q_vector->itr_register); + q_vector->set_itr = 0; +} + +static irqreturn_t igb_msix_ring(int irq, void *data) +{ + struct igb_q_vector *q_vector = data; + + /* Write the ITR value calculated from the previous interrupt. */ + igb_write_itr(q_vector); + + napi_schedule(&q_vector->napi); + + return IRQ_HANDLED; +} + +#ifdef IGB_DCA +static void igb_update_tx_dca(struct igb_adapter *adapter, + struct igb_ring *tx_ring, + int cpu) +{ + struct e1000_hw *hw = &adapter->hw; + u32 txctrl = dca3_get_tag(tx_ring->dev, cpu); + + if (hw->mac.type != e1000_82575) + txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT_82576; + + /* + * We can enable relaxed ordering for reads, but not writes when + * DCA is enabled. This is due to a known issue in some chipsets + * which will cause the DCA tag to be cleared. + */ + txctrl |= E1000_DCA_TXCTRL_DESC_RRO_EN | + E1000_DCA_TXCTRL_DATA_RRO_EN | + E1000_DCA_TXCTRL_DESC_DCA_EN; + + E1000_WRITE_REG(hw, E1000_DCA_TXCTRL(tx_ring->reg_idx), txctrl); +} + +static void igb_update_rx_dca(struct igb_adapter *adapter, + struct igb_ring *rx_ring, + int cpu) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rxctrl = dca3_get_tag(&adapter->pdev->dev, cpu); + + if (hw->mac.type != e1000_82575) + rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT_82576; + + /* + * We can enable relaxed ordering for reads, but not writes when + * DCA is enabled. This is due to a known issue in some chipsets + * which will cause the DCA tag to be cleared. + */ + rxctrl |= E1000_DCA_RXCTRL_DESC_RRO_EN | + E1000_DCA_RXCTRL_DESC_DCA_EN; + + E1000_WRITE_REG(hw, E1000_DCA_RXCTRL(rx_ring->reg_idx), rxctrl); +} + +static void igb_update_dca(struct igb_q_vector *q_vector) +{ + struct igb_adapter *adapter = q_vector->adapter; + int cpu = get_cpu(); + + if (q_vector->cpu == cpu) + goto out_no_update; + + if (q_vector->tx.ring) + igb_update_tx_dca(adapter, q_vector->tx.ring, cpu); + + if (q_vector->rx.ring) + igb_update_rx_dca(adapter, q_vector->rx.ring, cpu); + + q_vector->cpu = cpu; +out_no_update: + put_cpu(); +} + +static void igb_setup_dca(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + + if (!(adapter->flags & IGB_FLAG_DCA_ENABLED)) + return; + + /* Always use CB2 mode, difference is masked in the CB driver. */ + E1000_WRITE_REG(hw, E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2); + + for (i = 0; i < adapter->num_q_vectors; i++) { + adapter->q_vector[i]->cpu = -1; + igb_update_dca(adapter->q_vector[i]); + } +} + +static int __igb_notify_dca(struct device *dev, void *data) +{ + struct net_device *netdev = dev_get_drvdata(dev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct pci_dev *pdev = adapter->pdev; + struct e1000_hw *hw = &adapter->hw; + unsigned long event = *(unsigned long *)data; + + switch (event) { + case DCA_PROVIDER_ADD: + /* if already enabled, don't do it again */ + if (adapter->flags & IGB_FLAG_DCA_ENABLED) + break; + if (dca_add_requester(dev) == E1000_SUCCESS) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; + dev_info(pci_dev_to_dev(pdev), "DCA enabled\n"); + igb_setup_dca(adapter); + break; + } + /* Fall Through since DCA is disabled. */ + case DCA_PROVIDER_REMOVE: + if (adapter->flags & IGB_FLAG_DCA_ENABLED) { + /* without this a class_device is left + * hanging around in the sysfs model */ + dca_remove_requester(dev); + dev_info(pci_dev_to_dev(pdev), "DCA disabled\n"); + adapter->flags &= ~IGB_FLAG_DCA_ENABLED; + E1000_WRITE_REG(hw, E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_DISABLE); + } + break; + } + + return E1000_SUCCESS; +} + +static int igb_notify_dca(struct notifier_block *nb, unsigned long event, + void *p) +{ + int ret_val; + + ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event, + __igb_notify_dca); + + return ret_val ? NOTIFY_BAD : NOTIFY_DONE; +} +#endif /* IGB_DCA */ + +static int igb_vf_configure(struct igb_adapter *adapter, int vf) +{ + unsigned char mac_addr[ETH_ALEN]; + + random_ether_addr(mac_addr); + igb_set_vf_mac(adapter, vf, mac_addr); + +#ifdef IFLA_VF_MAX +#ifdef HAVE_VF_SPOOFCHK_CONFIGURE + /* By default spoof check is enabled for all VFs */ + adapter->vf_data[vf].spoofchk_enabled = true; +#endif +#endif + + return true; +} + +static void igb_ping_all_vfs(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ping; + int i; + + for (i = 0 ; i < adapter->vfs_allocated_count; i++) { + ping = E1000_PF_CONTROL_MSG; + if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS) + ping |= E1000_VT_MSGTYPE_CTS; + e1000_write_mbx(hw, &ping, 1, i); + } +} + +/** + * igb_mta_set_ - Set multicast filter table address + * @adapter: pointer to the adapter structure + * @hash_value: determines the MTA register and bit to set + * + * The multicast table address is a register array of 32-bit registers. + * The hash_value is used to determine what register the bit is in, the + * current value is read, the new bit is OR'd in and the new value is + * written back into the register. + **/ +void igb_mta_set(struct igb_adapter *adapter, u32 hash_value) +{ + struct e1000_hw *hw = &adapter->hw; + u32 hash_bit, hash_reg, mta; + + /* + * The MTA is a register array of 32-bit registers. It is + * treated like an array of (32*mta_reg_count) bits. We want to + * set bit BitArray[hash_value]. So we figure out what register + * the bit is in, read it, OR in the new bit, then write + * back the new value. The (hw->mac.mta_reg_count - 1) serves as a + * mask to bits 31:5 of the hash value which gives us the + * register we're modifying. The hash bit within that register + * is determined by the lower 5 bits of the hash value. + */ + hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); + hash_bit = hash_value & 0x1F; + + mta = E1000_READ_REG_ARRAY(hw, E1000_MTA, hash_reg); + + mta |= (1 << hash_bit); + + E1000_WRITE_REG_ARRAY(hw, E1000_MTA, hash_reg, mta); + E1000_WRITE_FLUSH(hw); +} + +static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf) +{ + + struct e1000_hw *hw = &adapter->hw; + u32 vmolr = E1000_READ_REG(hw, E1000_VMOLR(vf)); + struct vf_data_storage *vf_data = &adapter->vf_data[vf]; + + vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC | + IGB_VF_FLAG_MULTI_PROMISC); + vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME); + +#ifdef IGB_ENABLE_VF_PROMISC + if (*msgbuf & E1000_VF_SET_PROMISC_UNICAST) { + vmolr |= E1000_VMOLR_ROPE; + vf_data->flags |= IGB_VF_FLAG_UNI_PROMISC; + *msgbuf &= ~E1000_VF_SET_PROMISC_UNICAST; + } +#endif + if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) { + vmolr |= E1000_VMOLR_MPME; + vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC; + *msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST; + } else { + /* + * if we have hashes and we are clearing a multicast promisc + * flag we need to write the hashes to the MTA as this step + * was previously skipped + */ + if (vf_data->num_vf_mc_hashes > 30) { + vmolr |= E1000_VMOLR_MPME; + } else if (vf_data->num_vf_mc_hashes) { + int j; + vmolr |= E1000_VMOLR_ROMPE; + for (j = 0; j < vf_data->num_vf_mc_hashes; j++) + igb_mta_set(adapter, vf_data->vf_mc_hashes[j]); + } + } + + E1000_WRITE_REG(hw, E1000_VMOLR(vf), vmolr); + + /* there are flags left unprocessed, likely not supported */ + if (*msgbuf & E1000_VT_MSGINFO_MASK) + return -EINVAL; + + return 0; + +} + +static int igb_set_vf_multicasts(struct igb_adapter *adapter, + u32 *msgbuf, u32 vf) +{ + int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT; + u16 *hash_list = (u16 *)&msgbuf[1]; + struct vf_data_storage *vf_data = &adapter->vf_data[vf]; + int i; + + /* salt away the number of multicast addresses assigned + * to this VF for later use to restore when the PF multi cast + * list changes + */ + vf_data->num_vf_mc_hashes = n; + + /* only up to 30 hash values supported */ + if (n > 30) + n = 30; + + /* store the hashes for later use */ + for (i = 0; i < n; i++) + vf_data->vf_mc_hashes[i] = hash_list[i]; + + /* Flush and reset the mta with the new values */ + igb_set_rx_mode(adapter->netdev); + + return 0; +} + +static void igb_restore_vf_multicasts(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct vf_data_storage *vf_data; + int i, j; + + for (i = 0; i < adapter->vfs_allocated_count; i++) { + u32 vmolr = E1000_READ_REG(hw, E1000_VMOLR(i)); + vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME); + + vf_data = &adapter->vf_data[i]; + + if ((vf_data->num_vf_mc_hashes > 30) || + (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) { + vmolr |= E1000_VMOLR_MPME; + } else if (vf_data->num_vf_mc_hashes) { + vmolr |= E1000_VMOLR_ROMPE; + for (j = 0; j < vf_data->num_vf_mc_hashes; j++) + igb_mta_set(adapter, vf_data->vf_mc_hashes[j]); + } + E1000_WRITE_REG(hw, E1000_VMOLR(i), vmolr); + } +} + +static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + u32 pool_mask, reg, vid; + u16 vlan_default; + int i; + + pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf); + + /* Find the vlan filter for this id */ + for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { + reg = E1000_READ_REG(hw, E1000_VLVF(i)); + + /* remove the vf from the pool */ + reg &= ~pool_mask; + + /* if pool is empty then remove entry from vfta */ + if (!(reg & E1000_VLVF_POOLSEL_MASK) && + (reg & E1000_VLVF_VLANID_ENABLE)) { + reg = 0; + vid = reg & E1000_VLVF_VLANID_MASK; + igb_vfta_set(adapter, vid, FALSE); + } + + E1000_WRITE_REG(hw, E1000_VLVF(i), reg); + } + + adapter->vf_data[vf].vlans_enabled = 0; + + vlan_default = adapter->vf_data[vf].default_vf_vlan_id; + if (vlan_default) + igb_vlvf_set(adapter, vlan_default, true, vf); +} + +s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + u32 reg, i; + + /* The vlvf table only exists on 82576 hardware and newer */ + if (hw->mac.type < e1000_82576) + return -1; + + /* we only need to do this if VMDq is enabled */ + if (!adapter->vmdq_pools) + return -1; + + /* Find the vlan filter for this id */ + for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { + reg = E1000_READ_REG(hw, E1000_VLVF(i)); + if ((reg & E1000_VLVF_VLANID_ENABLE) && + vid == (reg & E1000_VLVF_VLANID_MASK)) + break; + } + + if (add) { + if (i == E1000_VLVF_ARRAY_SIZE) { + /* Did not find a matching VLAN ID entry that was + * enabled. Search for a free filter entry, i.e. + * one without the enable bit set + */ + for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { + reg = E1000_READ_REG(hw, E1000_VLVF(i)); + if (!(reg & E1000_VLVF_VLANID_ENABLE)) + break; + } + } + if (i < E1000_VLVF_ARRAY_SIZE) { + /* Found an enabled/available entry */ + reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf); + + /* if !enabled we need to set this up in vfta */ + if (!(reg & E1000_VLVF_VLANID_ENABLE)) { + /* add VID to filter table */ + igb_vfta_set(adapter, vid, TRUE); + reg |= E1000_VLVF_VLANID_ENABLE; + } + reg &= ~E1000_VLVF_VLANID_MASK; + reg |= vid; + E1000_WRITE_REG(hw, E1000_VLVF(i), reg); + + /* do not modify RLPML for PF devices */ + if (vf >= adapter->vfs_allocated_count) + return E1000_SUCCESS; + + if (!adapter->vf_data[vf].vlans_enabled) { + u32 size; + reg = E1000_READ_REG(hw, E1000_VMOLR(vf)); + size = reg & E1000_VMOLR_RLPML_MASK; + size += 4; + reg &= ~E1000_VMOLR_RLPML_MASK; + reg |= size; + E1000_WRITE_REG(hw, E1000_VMOLR(vf), reg); + } + + adapter->vf_data[vf].vlans_enabled++; + } + } else { + if (i < E1000_VLVF_ARRAY_SIZE) { + /* remove vf from the pool */ + reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf)); + /* if pool is empty then remove entry from vfta */ + if (!(reg & E1000_VLVF_POOLSEL_MASK)) { + reg = 0; + igb_vfta_set(adapter, vid, FALSE); + } + E1000_WRITE_REG(hw, E1000_VLVF(i), reg); + + /* do not modify RLPML for PF devices */ + if (vf >= adapter->vfs_allocated_count) + return E1000_SUCCESS; + + adapter->vf_data[vf].vlans_enabled--; + if (!adapter->vf_data[vf].vlans_enabled) { + u32 size; + reg = E1000_READ_REG(hw, E1000_VMOLR(vf)); + size = reg & E1000_VMOLR_RLPML_MASK; + size -= 4; + reg &= ~E1000_VMOLR_RLPML_MASK; + reg |= size; + E1000_WRITE_REG(hw, E1000_VMOLR(vf), reg); + } + } + } + return E1000_SUCCESS; +} + +#ifdef IFLA_VF_MAX +static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + + if (vid) + E1000_WRITE_REG(hw, E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT)); + else + E1000_WRITE_REG(hw, E1000_VMVIR(vf), 0); +} + +static int igb_ndo_set_vf_vlan(struct net_device *netdev, +#ifdef HAVE_VF_VLAN_PROTO + int vf, u16 vlan, u8 qos, __be16 vlan_proto) +#else + int vf, u16 vlan, u8 qos) +#endif +{ + int err = 0; + struct igb_adapter *adapter = netdev_priv(netdev); + + /* VLAN IDs accepted range 0-4094 */ + if ((vf >= adapter->vfs_allocated_count) || (vlan > VLAN_VID_MASK-1) || (qos > 7)) + return -EINVAL; + +#ifdef HAVE_VF_VLAN_PROTO + if (vlan_proto != htons(ETH_P_8021Q)) + return -EPROTONOSUPPORT; +#endif + + if (vlan || qos) { + err = igb_vlvf_set(adapter, vlan, !!vlan, vf); + if (err) + goto out; + igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf); + igb_set_vmolr(adapter, vf, !vlan); + adapter->vf_data[vf].pf_vlan = vlan; + adapter->vf_data[vf].pf_qos = qos; + igb_set_vf_vlan_strip(adapter, vf, true); + dev_info(&adapter->pdev->dev, + "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf); + if (test_bit(__IGB_DOWN, &adapter->state)) { + dev_warn(&adapter->pdev->dev, + "The VF VLAN has been set," + " but the PF device is not up.\n"); + dev_warn(&adapter->pdev->dev, + "Bring the PF device up before" + " attempting to use the VF device.\n"); + } + } else { + if (adapter->vf_data[vf].pf_vlan) + dev_info(&adapter->pdev->dev, + "Clearing VLAN on VF %d\n", vf); + igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan, + false, vf); + igb_set_vmvir(adapter, vlan, vf); + igb_set_vmolr(adapter, vf, true); + igb_set_vf_vlan_strip(adapter, vf, false); + adapter->vf_data[vf].pf_vlan = 0; + adapter->vf_data[vf].pf_qos = 0; + } +out: + return err; +} + +#ifdef HAVE_VF_SPOOFCHK_CONFIGURE +static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, + bool setting) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 dtxswc, reg_offset; + + if (!adapter->vfs_allocated_count) + return -EOPNOTSUPP; + + if (vf >= adapter->vfs_allocated_count) + return -EINVAL; + + reg_offset = (hw->mac.type == e1000_82576) ? E1000_DTXSWC : E1000_TXSWC; + dtxswc = E1000_READ_REG(hw, reg_offset); + if (setting) + dtxswc |= ((1 << vf) | + (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT))); + else + dtxswc &= ~((1 << vf) | + (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT))); + E1000_WRITE_REG(hw, reg_offset, dtxswc); + + adapter->vf_data[vf].spoofchk_enabled = setting; + return E1000_SUCCESS; +} +#endif /* HAVE_VF_SPOOFCHK_CONFIGURE */ +#endif /* IFLA_VF_MAX */ + +static int igb_find_vlvf_entry(struct igb_adapter *adapter, int vid) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + u32 reg; + + /* Find the vlan filter for this id */ + for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { + reg = E1000_READ_REG(hw, E1000_VLVF(i)); + if ((reg & E1000_VLVF_VLANID_ENABLE) && + vid == (reg & E1000_VLVF_VLANID_MASK)) + break; + } + + if (i >= E1000_VLVF_ARRAY_SIZE) + i = -1; + + return i; +} + +static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT; + int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK); + int err = 0; + + if (vid) + igb_set_vf_vlan_strip(adapter, vf, true); + else + igb_set_vf_vlan_strip(adapter, vf, false); + + /* If in promiscuous mode we need to make sure the PF also has + * the VLAN filter set. + */ + if (add && (adapter->netdev->flags & IFF_PROMISC)) + err = igb_vlvf_set(adapter, vid, add, + adapter->vfs_allocated_count); + if (err) + goto out; + + err = igb_vlvf_set(adapter, vid, add, vf); + + if (err) + goto out; + + /* Go through all the checks to see if the VLAN filter should + * be wiped completely. + */ + if (!add && (adapter->netdev->flags & IFF_PROMISC)) { + u32 vlvf, bits; + + int regndx = igb_find_vlvf_entry(adapter, vid); + if (regndx < 0) + goto out; + /* See if any other pools are set for this VLAN filter + * entry other than the PF. + */ + vlvf = bits = E1000_READ_REG(hw, E1000_VLVF(regndx)); + bits &= 1 << (E1000_VLVF_POOLSEL_SHIFT + + adapter->vfs_allocated_count); + /* If the filter was removed then ensure PF pool bit + * is cleared if the PF only added itself to the pool + * because the PF is in promiscuous mode. + */ + if ((vlvf & VLAN_VID_MASK) == vid && +#ifndef HAVE_VLAN_RX_REGISTER + !test_bit(vid, adapter->active_vlans) && +#endif + !bits) + igb_vlvf_set(adapter, vid, add, + adapter->vfs_allocated_count); + } + +out: + return err; +} + +static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + + /* clear flags except flag that the PF has set the MAC */ + adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC; + adapter->vf_data[vf].last_nack = jiffies; + + /* reset offloads to defaults */ + igb_set_vmolr(adapter, vf, true); + + /* reset vlans for device */ + igb_clear_vf_vfta(adapter, vf); +#ifdef IFLA_VF_MAX + if (adapter->vf_data[vf].pf_vlan) + igb_ndo_set_vf_vlan(adapter->netdev, vf, + adapter->vf_data[vf].pf_vlan, +#ifdef HAVE_VF_VLAN_PROTO + adapter->vf_data[vf].pf_qos, + htons(ETH_P_8021Q)); +#else + adapter->vf_data[vf].pf_qos); +#endif + else + igb_clear_vf_vfta(adapter, vf); +#endif + + /* reset multicast table array for vf */ + adapter->vf_data[vf].num_vf_mc_hashes = 0; + + /* Flush and reset the mta with the new values */ + igb_set_rx_mode(adapter->netdev); + + /* + * Reset the VFs TDWBAL and TDWBAH registers which are not + * cleared by a VFLR + */ + E1000_WRITE_REG(hw, E1000_TDWBAH(vf), 0); + E1000_WRITE_REG(hw, E1000_TDWBAL(vf), 0); + if (hw->mac.type == e1000_82576) { + E1000_WRITE_REG(hw, E1000_TDWBAH(IGB_MAX_VF_FUNCTIONS + vf), 0); + E1000_WRITE_REG(hw, E1000_TDWBAL(IGB_MAX_VF_FUNCTIONS + vf), 0); + } +} + +static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf) +{ + unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses; + + /* generate a new mac address as we were hotplug removed/added */ + if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC)) + random_ether_addr(vf_mac); + + /* process remaining reset events */ + igb_vf_reset(adapter, vf); +} + +static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses; + u32 reg, msgbuf[3]; + u8 *addr = (u8 *)(&msgbuf[1]); + + /* process all the same items cleared in a function level reset */ + igb_vf_reset(adapter, vf); + + /* set vf mac address */ + igb_del_mac_filter(adapter, vf_mac, vf); + igb_add_mac_filter(adapter, vf_mac, vf); + + /* enable transmit and receive for vf */ + reg = E1000_READ_REG(hw, E1000_VFTE); + E1000_WRITE_REG(hw, E1000_VFTE, reg | (1 << vf)); + reg = E1000_READ_REG(hw, E1000_VFRE); + E1000_WRITE_REG(hw, E1000_VFRE, reg | (1 << vf)); + + adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS; + + /* reply to reset with ack and vf mac address */ + msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK; + memcpy(addr, vf_mac, 6); + e1000_write_mbx(hw, msgbuf, 3, vf); +} + +static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf) +{ + /* + * The VF MAC Address is stored in a packed array of bytes + * starting at the second 32 bit word of the msg array + */ + unsigned char *addr = (unsigned char *)&msg[1]; + int err = -1; + + if (is_valid_ether_addr(addr)) + err = igb_set_vf_mac(adapter, vf, addr); + + return err; +} + +static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf) +{ + struct e1000_hw *hw = &adapter->hw; + struct vf_data_storage *vf_data = &adapter->vf_data[vf]; + u32 msg = E1000_VT_MSGTYPE_NACK; + + /* if device isn't clear to send it shouldn't be reading either */ + if (!(vf_data->flags & IGB_VF_FLAG_CTS) && + time_after(jiffies, vf_data->last_nack + (2 * HZ))) { + e1000_write_mbx(hw, &msg, 1, vf); + vf_data->last_nack = jiffies; + } +} + +static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf) +{ + struct pci_dev *pdev = adapter->pdev; + u32 msgbuf[E1000_VFMAILBOX_SIZE]; + struct e1000_hw *hw = &adapter->hw; + struct vf_data_storage *vf_data = &adapter->vf_data[vf]; + s32 retval; + + retval = e1000_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf); + + if (retval) { + dev_err(pci_dev_to_dev(pdev), "Error receiving message from VF\n"); + return; + } + + /* this is a message we already processed, do nothing */ + if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK)) + return; + + /* + * until the vf completes a reset it should not be + * allowed to start any configuration. + */ + + if (msgbuf[0] == E1000_VF_RESET) { + igb_vf_reset_msg(adapter, vf); + return; + } + + if (!(vf_data->flags & IGB_VF_FLAG_CTS)) { + msgbuf[0] = E1000_VT_MSGTYPE_NACK; + if (time_after(jiffies, vf_data->last_nack + (2 * HZ))) { + e1000_write_mbx(hw, msgbuf, 1, vf); + vf_data->last_nack = jiffies; + } + return; + } + + switch ((msgbuf[0] & 0xFFFF)) { + case E1000_VF_SET_MAC_ADDR: + retval = -EINVAL; +#ifndef IGB_DISABLE_VF_MAC_SET + if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC)) + retval = igb_set_vf_mac_addr(adapter, msgbuf, vf); + else + DPRINTK(DRV, INFO, + "VF %d attempted to override administratively " + "set MAC address\nReload the VF driver to " + "resume operations\n", vf); +#endif + break; + case E1000_VF_SET_PROMISC: + retval = igb_set_vf_promisc(adapter, msgbuf, vf); + break; + case E1000_VF_SET_MULTICAST: + retval = igb_set_vf_multicasts(adapter, msgbuf, vf); + break; + case E1000_VF_SET_LPE: + retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf); + break; + case E1000_VF_SET_VLAN: + retval = -1; +#ifdef IFLA_VF_MAX + if (vf_data->pf_vlan) + DPRINTK(DRV, INFO, + "VF %d attempted to override administratively " + "set VLAN tag\nReload the VF driver to " + "resume operations\n", vf); + else +#endif + retval = igb_set_vf_vlan(adapter, msgbuf, vf); + break; + default: + dev_err(pci_dev_to_dev(pdev), "Unhandled Msg %08x\n", msgbuf[0]); + retval = -E1000_ERR_MBX; + break; + } + + /* notify the VF of the results of what it sent us */ + if (retval) + msgbuf[0] |= E1000_VT_MSGTYPE_NACK; + else + msgbuf[0] |= E1000_VT_MSGTYPE_ACK; + + msgbuf[0] |= E1000_VT_MSGTYPE_CTS; + + e1000_write_mbx(hw, msgbuf, 1, vf); +} + +static void igb_msg_task(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 vf; + + for (vf = 0; vf < adapter->vfs_allocated_count; vf++) { + /* process any reset requests */ + if (!e1000_check_for_rst(hw, vf)) + igb_vf_reset_event(adapter, vf); + + /* process any messages pending */ + if (!e1000_check_for_msg(hw, vf)) + igb_rcv_msg_from_vf(adapter, vf); + + /* process any acks */ + if (!e1000_check_for_ack(hw, vf)) + igb_rcv_ack_from_vf(adapter, vf); + } +} + +/** + * igb_set_uta - Set unicast filter table address + * @adapter: board private structure + * + * The unicast table address is a register array of 32-bit registers. + * The table is meant to be used in a way similar to how the MTA is used + * however due to certain limitations in the hardware it is necessary to + * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous + * enable bit to allow vlan tag stripping when promiscuous mode is enabled + **/ +static void igb_set_uta(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + + /* The UTA table only exists on 82576 hardware and newer */ + if (hw->mac.type < e1000_82576) + return; + + /* we only need to do this if VMDq is enabled */ + if (!adapter->vmdq_pools) + return; + + for (i = 0; i < hw->mac.uta_reg_count; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_UTA, i, ~0); +} + +/** + * igb_intr_msi - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ +static irqreturn_t igb_intr_msi(int irq, void *data) +{ + struct igb_adapter *adapter = data; + struct igb_q_vector *q_vector = adapter->q_vector[0]; + struct e1000_hw *hw = &adapter->hw; + /* read ICR disables interrupts using IAM */ + u32 icr = E1000_READ_REG(hw, E1000_ICR); + + igb_write_itr(q_vector); + + if (icr & E1000_ICR_DRSTA) + schedule_work(&adapter->reset_task); + + if (icr & E1000_ICR_DOUTSYNC) { + /* HW is reporting DMA is out of sync */ + adapter->stats.doosync++; + } + + if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { + hw->mac.get_link_status = 1; + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + +#ifdef HAVE_PTP_1588_CLOCK + if (icr & E1000_ICR_TS) { + u32 tsicr = E1000_READ_REG(hw, E1000_TSICR); + + if (tsicr & E1000_TSICR_TXTS) { + /* acknowledge the interrupt */ + E1000_WRITE_REG(hw, E1000_TSICR, E1000_TSICR_TXTS); + /* retrieve hardware timestamp */ + schedule_work(&adapter->ptp_tx_work); + } + } +#endif /* HAVE_PTP_1588_CLOCK */ + + napi_schedule(&q_vector->napi); + + return IRQ_HANDLED; +} + +/** + * igb_intr - Legacy Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ +static irqreturn_t igb_intr(int irq, void *data) +{ + struct igb_adapter *adapter = data; + struct igb_q_vector *q_vector = adapter->q_vector[0]; + struct e1000_hw *hw = &adapter->hw; + /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No + * need for the IMC write */ + u32 icr = E1000_READ_REG(hw, E1000_ICR); + + /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is + * not set, then the adapter didn't send an interrupt */ + if (!(icr & E1000_ICR_INT_ASSERTED)) + return IRQ_NONE; + + igb_write_itr(q_vector); + + if (icr & E1000_ICR_DRSTA) + schedule_work(&adapter->reset_task); + + if (icr & E1000_ICR_DOUTSYNC) { + /* HW is reporting DMA is out of sync */ + adapter->stats.doosync++; + } + + if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { + hw->mac.get_link_status = 1; + /* guard against interrupt when we're going down */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + } + +#ifdef HAVE_PTP_1588_CLOCK + if (icr & E1000_ICR_TS) { + u32 tsicr = E1000_READ_REG(hw, E1000_TSICR); + + if (tsicr & E1000_TSICR_TXTS) { + /* acknowledge the interrupt */ + E1000_WRITE_REG(hw, E1000_TSICR, E1000_TSICR_TXTS); + /* retrieve hardware timestamp */ + schedule_work(&adapter->ptp_tx_work); + } + } +#endif /* HAVE_PTP_1588_CLOCK */ + + napi_schedule(&q_vector->napi); + + return IRQ_HANDLED; +} + +void igb_ring_irq_enable(struct igb_q_vector *q_vector) +{ + struct igb_adapter *adapter = q_vector->adapter; + struct e1000_hw *hw = &adapter->hw; + + if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) || + (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) { + if ((adapter->num_q_vectors == 1) && !adapter->vf_data) + igb_set_itr(q_vector); + else + igb_update_ring_itr(q_vector); + } + + if (!test_bit(__IGB_DOWN, &adapter->state)) { + if (adapter->msix_entries) + E1000_WRITE_REG(hw, E1000_EIMS, q_vector->eims_value); + else + igb_irq_enable(adapter); + } +} + +/** + * igb_poll - NAPI Rx polling callback + * @napi: napi polling structure + * @budget: count of how many packets we should handle + **/ +static int igb_poll(struct napi_struct *napi, int budget) +{ + struct igb_q_vector *q_vector = container_of(napi, struct igb_q_vector, napi); + bool clean_complete = true; + +#ifdef IGB_DCA + if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED) + igb_update_dca(q_vector); +#endif + if (q_vector->tx.ring) + clean_complete = igb_clean_tx_irq(q_vector); + + if (q_vector->rx.ring) + clean_complete &= igb_clean_rx_irq(q_vector, budget); + +#ifndef HAVE_NETDEV_NAPI_LIST + /* if netdev is disabled we need to stop polling */ + if (!netif_running(q_vector->adapter->netdev)) + clean_complete = true; + +#endif + /* If all work not completed, return budget and keep polling */ + if (!clean_complete) + return budget; + + /* If not enough Rx work done, exit the polling mode */ + napi_complete(napi); + igb_ring_irq_enable(q_vector); + + return 0; +} + +/** + * igb_clean_tx_irq - Reclaim resources after transmit completes + * @q_vector: pointer to q_vector containing needed info + * returns TRUE if ring is completely cleaned + **/ +static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) +{ + struct igb_adapter *adapter = q_vector->adapter; + struct igb_ring *tx_ring = q_vector->tx.ring; + struct igb_tx_buffer *tx_buffer; + union e1000_adv_tx_desc *tx_desc; + unsigned int total_bytes = 0, total_packets = 0; + unsigned int budget = q_vector->tx.work_limit; + unsigned int i = tx_ring->next_to_clean; + + if (test_bit(__IGB_DOWN, &adapter->state)) + return true; + + tx_buffer = &tx_ring->tx_buffer_info[i]; + tx_desc = IGB_TX_DESC(tx_ring, i); + i -= tx_ring->count; + + do { + union e1000_adv_tx_desc *eop_desc = tx_buffer->next_to_watch; + + /* if next_to_watch is not set then there is no work pending */ + if (!eop_desc) + break; + + /* prevent any other reads prior to eop_desc */ + read_barrier_depends(); + + /* if DD is not set pending work has not been completed */ + if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD))) + break; + + /* clear next_to_watch to prevent false hangs */ + tx_buffer->next_to_watch = NULL; + + /* update the statistics for this packet */ + total_bytes += tx_buffer->bytecount; + total_packets += tx_buffer->gso_segs; + + /* free the skb */ + dev_kfree_skb_any(tx_buffer->skb); + + /* unmap skb header data */ + dma_unmap_single(tx_ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + + /* clear tx_buffer data */ + tx_buffer->skb = NULL; + dma_unmap_len_set(tx_buffer, len, 0); + + /* clear last DMA location and unmap remaining buffers */ + while (tx_desc != eop_desc) { + tx_buffer++; + tx_desc++; + i++; + if (unlikely(!i)) { + i -= tx_ring->count; + tx_buffer = tx_ring->tx_buffer_info; + tx_desc = IGB_TX_DESC(tx_ring, 0); + } + + /* unmap any remaining paged data */ + if (dma_unmap_len(tx_buffer, len)) { + dma_unmap_page(tx_ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + dma_unmap_len_set(tx_buffer, len, 0); + } + } + + /* move us one more past the eop_desc for start of next pkt */ + tx_buffer++; + tx_desc++; + i++; + if (unlikely(!i)) { + i -= tx_ring->count; + tx_buffer = tx_ring->tx_buffer_info; + tx_desc = IGB_TX_DESC(tx_ring, 0); + } + + /* issue prefetch for next Tx descriptor */ + prefetch(tx_desc); + + /* update budget accounting */ + budget--; + } while (likely(budget)); + + netdev_tx_completed_queue(txring_txq(tx_ring), + total_packets, total_bytes); + + i += tx_ring->count; + tx_ring->next_to_clean = i; + tx_ring->tx_stats.bytes += total_bytes; + tx_ring->tx_stats.packets += total_packets; + q_vector->tx.total_bytes += total_bytes; + q_vector->tx.total_packets += total_packets; + +#ifdef DEBUG + if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags) && + !(adapter->disable_hw_reset && adapter->tx_hang_detected)) { +#else + if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags)) { +#endif + struct e1000_hw *hw = &adapter->hw; + + /* Detect a transmit hang in hardware, this serializes the + * check with the clearing of time_stamp and movement of i */ + clear_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags); + if (tx_buffer->next_to_watch && + time_after(jiffies, tx_buffer->time_stamp + + (adapter->tx_timeout_factor * HZ)) + && !(E1000_READ_REG(hw, E1000_STATUS) & + E1000_STATUS_TXOFF)) { + + /* detected Tx unit hang */ +#ifdef DEBUG + adapter->tx_hang_detected = TRUE; + if (adapter->disable_hw_reset) { + DPRINTK(DRV, WARNING, + "Deactivating netdev watchdog timer\n"); + if (del_timer(&netdev_ring(tx_ring)->watchdog_timer)) + dev_put(netdev_ring(tx_ring)); +#ifndef HAVE_NET_DEVICE_OPS + netdev_ring(tx_ring)->tx_timeout = NULL; +#endif + } +#endif /* DEBUG */ + dev_err(tx_ring->dev, + "Detected Tx Unit Hang\n" + " Tx Queue <%d>\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "buffer_info[next_to_clean]\n" + " time_stamp <%lx>\n" + " next_to_watch <%p>\n" + " jiffies <%lx>\n" + " desc.status <%x>\n", + tx_ring->queue_index, + E1000_READ_REG(hw, E1000_TDH(tx_ring->reg_idx)), + readl(tx_ring->tail), + tx_ring->next_to_use, + tx_ring->next_to_clean, + tx_buffer->time_stamp, + tx_buffer->next_to_watch, + jiffies, + tx_buffer->next_to_watch->wb.status); + if (netif_is_multiqueue(netdev_ring(tx_ring))) + netif_stop_subqueue(netdev_ring(tx_ring), + ring_queue_index(tx_ring)); + else + netif_stop_queue(netdev_ring(tx_ring)); + + /* we are about to reset, no point in enabling stuff */ + return true; + } + } + +#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) + if (unlikely(total_packets && + netif_carrier_ok(netdev_ring(tx_ring)) && + igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) { + /* Make sure that anybody stopping the queue after this + * sees the new next_to_clean. + */ + smp_mb(); + if (netif_is_multiqueue(netdev_ring(tx_ring))) { + if (__netif_subqueue_stopped(netdev_ring(tx_ring), + ring_queue_index(tx_ring)) && + !(test_bit(__IGB_DOWN, &adapter->state))) { + netif_wake_subqueue(netdev_ring(tx_ring), + ring_queue_index(tx_ring)); + tx_ring->tx_stats.restart_queue++; + } + } else { + if (netif_queue_stopped(netdev_ring(tx_ring)) && + !(test_bit(__IGB_DOWN, &adapter->state))) { + netif_wake_queue(netdev_ring(tx_ring)); + tx_ring->tx_stats.restart_queue++; + } + } + } + + return !!budget; +} + +#ifdef HAVE_VLAN_RX_REGISTER +/** + * igb_receive_skb - helper function to handle rx indications + * @q_vector: structure containing interrupt and ring information + * @skb: packet to send up + **/ +static void igb_receive_skb(struct igb_q_vector *q_vector, + struct sk_buff *skb) +{ + struct vlan_group **vlgrp = netdev_priv(skb->dev); + + if (IGB_CB(skb)->vid) { + if (*vlgrp) { + vlan_gro_receive(&q_vector->napi, *vlgrp, + IGB_CB(skb)->vid, skb); + } else { + dev_kfree_skb_any(skb); + } + } else { + napi_gro_receive(&q_vector->napi, skb); + } +} + +#endif /* HAVE_VLAN_RX_REGISTER */ +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT +/** + * igb_reuse_rx_page - page flip buffer and store it back on the ring + * @rx_ring: rx descriptor ring to store buffers on + * @old_buff: donor buffer to have page reused + * + * Synchronizes page for reuse by the adapter + **/ +static void igb_reuse_rx_page(struct igb_ring *rx_ring, + struct igb_rx_buffer *old_buff) +{ + struct igb_rx_buffer *new_buff; + u16 nta = rx_ring->next_to_alloc; + + new_buff = &rx_ring->rx_buffer_info[nta]; + + /* update, and store next to alloc */ + nta++; + rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0; + + /* transfer page from old buffer to new buffer */ + memcpy(new_buff, old_buff, sizeof(struct igb_rx_buffer)); + + /* sync the buffer for use by the device */ + dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma, + old_buff->page_offset, + IGB_RX_BUFSZ, + DMA_FROM_DEVICE); +} + +static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer, + struct page *page, + unsigned int truesize) +{ + /* avoid re-using remote pages */ + if (unlikely(page_to_nid(page) != numa_node_id())) + return false; + +#if (PAGE_SIZE < 8192) + /* if we are only owner of page we can reuse it */ + if (unlikely(page_count(page) != 1)) + return false; + + /* flip page offset to other buffer */ + rx_buffer->page_offset ^= IGB_RX_BUFSZ; + +#else + /* move offset up to the next cache line */ + rx_buffer->page_offset += truesize; + + if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ)) + return false; +#endif + + /* bump ref count on page before it is given to the stack */ + get_page(page); + + return true; +} + +/** + * igb_add_rx_frag - Add contents of Rx buffer to sk_buff + * @rx_ring: rx descriptor ring to transact packets on + * @rx_buffer: buffer containing page to add + * @rx_desc: descriptor containing length of buffer written by hardware + * @skb: sk_buff to place the data into + * + * This function will add the data contained in rx_buffer->page to the skb. + * This is done either through a direct copy if the data in the buffer is + * less than the skb header size, otherwise it will just attach the page as + * a frag to the skb. + * + * The function will then update the page offset if necessary and return + * true if the buffer can be reused by the adapter. + **/ +static bool igb_add_rx_frag(struct igb_ring *rx_ring, + struct igb_rx_buffer *rx_buffer, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct page *page = rx_buffer->page; + unsigned int size = le16_to_cpu(rx_desc->wb.upper.length); +#if (PAGE_SIZE < 8192) + unsigned int truesize = IGB_RX_BUFSZ; +#else + unsigned int truesize = ALIGN(size, L1_CACHE_BYTES); +#endif + + if ((size <= IGB_RX_HDR_LEN) && !skb_is_nonlinear(skb)) { + unsigned char *va = page_address(page) + rx_buffer->page_offset; + +#ifdef HAVE_PTP_1588_CLOCK + if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { + igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb); + va += IGB_TS_HDR_LEN; + size -= IGB_TS_HDR_LEN; + } +#endif /* HAVE_PTP_1588_CLOCK */ + + memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long))); + + /* we can reuse buffer as-is, just make sure it is local */ + if (likely(page_to_nid(page) == numa_node_id())) + return true; + + /* this page cannot be reused so discard it */ + put_page(page); + return false; + } + + skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, + rx_buffer->page_offset, size, truesize); + + return igb_can_reuse_rx_page(rx_buffer, page, truesize); +} + +static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct igb_rx_buffer *rx_buffer; + struct page *page; + + rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; + + page = rx_buffer->page; + prefetchw(page); + + if (likely(!skb)) { + void *page_addr = page_address(page) + + rx_buffer->page_offset; + + /* prefetch first cache line of first page */ + prefetch(page_addr); +#if L1_CACHE_BYTES < 128 + prefetch(page_addr + L1_CACHE_BYTES); +#endif + + /* allocate a skb to store the frags */ + skb = netdev_alloc_skb_ip_align(rx_ring->netdev, + IGB_RX_HDR_LEN); + if (unlikely(!skb)) { + rx_ring->rx_stats.alloc_failed++; + return NULL; + } + + /* + * we will be copying header into skb->data in + * pskb_may_pull so it is in our interest to prefetch + * it now to avoid a possible cache miss + */ + prefetchw(skb->data); + } + + /* we are reusing so sync this buffer for CPU use */ + dma_sync_single_range_for_cpu(rx_ring->dev, + rx_buffer->dma, + rx_buffer->page_offset, + IGB_RX_BUFSZ, + DMA_FROM_DEVICE); + + /* pull page into skb */ + if (igb_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) { + /* hand second half of page back to the ring */ + igb_reuse_rx_page(rx_ring, rx_buffer); + } else { + /* we are not reusing the buffer so unmap it */ + dma_unmap_page(rx_ring->dev, rx_buffer->dma, + PAGE_SIZE, DMA_FROM_DEVICE); + } + + /* clear contents of rx_buffer */ + rx_buffer->page = NULL; + + return skb; +} + +#endif +static inline void igb_rx_checksum(struct igb_ring *ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + skb_checksum_none_assert(skb); + + /* Ignore Checksum bit is set */ + if (igb_test_staterr(rx_desc, E1000_RXD_STAT_IXSM)) + return; + + /* Rx checksum disabled via ethtool */ + if (!(netdev_ring(ring)->features & NETIF_F_RXCSUM)) + return; + + /* TCP/UDP checksum error bit is set */ + if (igb_test_staterr(rx_desc, + E1000_RXDEXT_STATERR_TCPE | + E1000_RXDEXT_STATERR_IPE)) { + /* + * work around errata with sctp packets where the TCPE aka + * L4E bit is set incorrectly on 64 byte (60 byte w/o crc) + * packets, (aka let the stack check the crc32c) + */ + if (!((skb->len == 60) && + test_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags))) + ring->rx_stats.csum_err++; + + /* let the stack verify checksum errors */ + return; + } + /* It must be a TCP or UDP packet with a valid checksum */ + if (igb_test_staterr(rx_desc, E1000_RXD_STAT_TCPCS | + E1000_RXD_STAT_UDPCS)) + skb->ip_summed = CHECKSUM_UNNECESSARY; +} + +#ifdef NETIF_F_RXHASH +static inline void igb_rx_hash(struct igb_ring *ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + if (netdev_ring(ring)->features & NETIF_F_RXHASH) + skb_set_hash(skb, le32_to_cpu(rx_desc->wb.lower.hi_dword.rss), + PKT_HASH_TYPE_L3); +} + +#endif +#ifndef IGB_NO_LRO +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT +/** + * igb_merge_active_tail - merge active tail into lro skb + * @tail: pointer to active tail in frag_list + * + * This function merges the length and data of an active tail into the + * skb containing the frag_list. It resets the tail's pointer to the head, + * but it leaves the heads pointer to tail intact. + **/ +static inline struct sk_buff *igb_merge_active_tail(struct sk_buff *tail) +{ + struct sk_buff *head = IGB_CB(tail)->head; + + if (!head) + return tail; + + head->len += tail->len; + head->data_len += tail->len; + head->truesize += tail->len; + + IGB_CB(tail)->head = NULL; + + return head; +} + +/** + * igb_add_active_tail - adds an active tail into the skb frag_list + * @head: pointer to the start of the skb + * @tail: pointer to active tail to add to frag_list + * + * This function adds an active tail to the end of the frag list. This tail + * will still be receiving data so we cannot yet ad it's stats to the main + * skb. That is done via igb_merge_active_tail. + **/ +static inline void igb_add_active_tail(struct sk_buff *head, struct sk_buff *tail) +{ + struct sk_buff *old_tail = IGB_CB(head)->tail; + + if (old_tail) { + igb_merge_active_tail(old_tail); + old_tail->next = tail; + } else { + skb_shinfo(head)->frag_list = tail; + } + + IGB_CB(tail)->head = head; + IGB_CB(head)->tail = tail; + + IGB_CB(head)->append_cnt++; +} + +/** + * igb_close_active_frag_list - cleanup pointers on a frag_list skb + * @head: pointer to head of an active frag list + * + * This function will clear the frag_tail_tracker pointer on an active + * frag_list and returns true if the pointer was actually set + **/ +static inline bool igb_close_active_frag_list(struct sk_buff *head) +{ + struct sk_buff *tail = IGB_CB(head)->tail; + + if (!tail) + return false; + + igb_merge_active_tail(tail); + + IGB_CB(head)->tail = NULL; + + return true; +} + +#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ +/** + * igb_can_lro - returns true if packet is TCP/IPV4 and LRO is enabled + * @adapter: board private structure + * @rx_desc: pointer to the rx descriptor + * @skb: pointer to the skb to be merged + * + **/ +static inline bool igb_can_lro(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct iphdr *iph = (struct iphdr *)skb->data; + __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; + + /* verify hardware indicates this is IPv4/TCP */ + if((!(pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_TCP)) || + !(pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV4)))) + return false; + + /* .. and LRO is enabled */ + if (!(netdev_ring(rx_ring)->features & NETIF_F_LRO)) + return false; + + /* .. and we are not in promiscuous mode */ + if (netdev_ring(rx_ring)->flags & IFF_PROMISC) + return false; + + /* .. and the header is large enough for us to read IP/TCP fields */ + if (!pskb_may_pull(skb, sizeof(struct igb_lrohdr))) + return false; + + /* .. and there are no VLANs on packet */ + if (skb->protocol != __constant_htons(ETH_P_IP)) + return false; + + /* .. and we are version 4 with no options */ + if (*(u8 *)iph != 0x45) + return false; + + /* .. and the packet is not fragmented */ + if (iph->frag_off & htons(IP_MF | IP_OFFSET)) + return false; + + /* .. and that next header is TCP */ + if (iph->protocol != IPPROTO_TCP) + return false; + + return true; +} + +static inline struct igb_lrohdr *igb_lro_hdr(struct sk_buff *skb) +{ + return (struct igb_lrohdr *)skb->data; +} + +/** + * igb_lro_flush - Indicate packets to upper layer. + * + * Update IP and TCP header part of head skb if more than one + * skb's chained and indicate packets to upper layer. + **/ +static void igb_lro_flush(struct igb_q_vector *q_vector, + struct sk_buff *skb) +{ + struct igb_lro_list *lrolist = &q_vector->lrolist; + + __skb_unlink(skb, &lrolist->active); + + if (IGB_CB(skb)->append_cnt) { + struct igb_lrohdr *lroh = igb_lro_hdr(skb); + +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + /* close any active lro contexts */ + igb_close_active_frag_list(skb); + +#endif + /* incorporate ip header and re-calculate checksum */ + lroh->iph.tot_len = ntohs(skb->len); + lroh->iph.check = 0; + + /* header length is 5 since we know no options exist */ + lroh->iph.check = ip_fast_csum((u8 *)lroh, 5); + + /* clear TCP checksum to indicate we are an LRO frame */ + lroh->th.check = 0; + + /* incorporate latest timestamp into the tcp header */ + if (IGB_CB(skb)->tsecr) { + lroh->ts[2] = IGB_CB(skb)->tsecr; + lroh->ts[1] = htonl(IGB_CB(skb)->tsval); + } +#ifdef NETIF_F_GSO + + skb_shinfo(skb)->gso_size = IGB_CB(skb)->mss; + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; +#endif + } + +#ifdef HAVE_VLAN_RX_REGISTER + igb_receive_skb(q_vector, skb); +#else + napi_gro_receive(&q_vector->napi, skb); +#endif + lrolist->stats.flushed++; +} + +static void igb_lro_flush_all(struct igb_q_vector *q_vector) +{ + struct igb_lro_list *lrolist = &q_vector->lrolist; + struct sk_buff *skb, *tmp; + + skb_queue_reverse_walk_safe(&lrolist->active, skb, tmp) + igb_lro_flush(q_vector, skb); +} + +/* + * igb_lro_header_ok - Main LRO function. + **/ +static void igb_lro_header_ok(struct sk_buff *skb) +{ + struct igb_lrohdr *lroh = igb_lro_hdr(skb); + u16 opt_bytes, data_len; + +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + IGB_CB(skb)->tail = NULL; +#endif + IGB_CB(skb)->tsecr = 0; + IGB_CB(skb)->append_cnt = 0; + IGB_CB(skb)->mss = 0; + + /* ensure that the checksum is valid */ + if (skb->ip_summed != CHECKSUM_UNNECESSARY) + return; + + /* If we see CE codepoint in IP header, packet is not mergeable */ + if (INET_ECN_is_ce(ipv4_get_dsfield(&lroh->iph))) + return; + + /* ensure no bits set besides ack or psh */ + if (lroh->th.fin || lroh->th.syn || lroh->th.rst || + lroh->th.urg || lroh->th.ece || lroh->th.cwr || + !lroh->th.ack) + return; + + /* store the total packet length */ + data_len = ntohs(lroh->iph.tot_len); + + /* remove any padding from the end of the skb */ + __pskb_trim(skb, data_len); + + /* remove header length from data length */ + data_len -= sizeof(struct igb_lrohdr); + + /* + * check for timestamps. Since the only option we handle are timestamps, + * we only have to handle the simple case of aligned timestamps + */ + opt_bytes = (lroh->th.doff << 2) - sizeof(struct tcphdr); + if (opt_bytes != 0) { + if ((opt_bytes != TCPOLEN_TSTAMP_ALIGNED) || + !pskb_may_pull(skb, sizeof(struct igb_lrohdr) + + TCPOLEN_TSTAMP_ALIGNED) || + (lroh->ts[0] != htonl((TCPOPT_NOP << 24) | + (TCPOPT_NOP << 16) | + (TCPOPT_TIMESTAMP << 8) | + TCPOLEN_TIMESTAMP)) || + (lroh->ts[2] == 0)) { + return; + } + + IGB_CB(skb)->tsval = ntohl(lroh->ts[1]); + IGB_CB(skb)->tsecr = lroh->ts[2]; + + data_len -= TCPOLEN_TSTAMP_ALIGNED; + } + + /* record data_len as mss for the packet */ + IGB_CB(skb)->mss = data_len; + IGB_CB(skb)->next_seq = ntohl(lroh->th.seq); +} + +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT +static void igb_merge_frags(struct sk_buff *lro_skb, struct sk_buff *new_skb) +{ + struct skb_shared_info *sh_info; + struct skb_shared_info *new_skb_info; + unsigned int data_len; + + sh_info = skb_shinfo(lro_skb); + new_skb_info = skb_shinfo(new_skb); + + /* copy frags into the last skb */ + memcpy(sh_info->frags + sh_info->nr_frags, + new_skb_info->frags, + new_skb_info->nr_frags * sizeof(skb_frag_t)); + + /* copy size data over */ + sh_info->nr_frags += new_skb_info->nr_frags; + data_len = IGB_CB(new_skb)->mss; + lro_skb->len += data_len; + lro_skb->data_len += data_len; + lro_skb->truesize += data_len; + + /* wipe record of data from new_skb */ + new_skb_info->nr_frags = 0; + new_skb->len = new_skb->data_len = 0; + dev_kfree_skb_any(new_skb); +} + +#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ +/** + * igb_lro_receive - if able, queue skb into lro chain + * @q_vector: structure containing interrupt and ring information + * @new_skb: pointer to current skb being checked + * + * Checks whether the skb given is eligible for LRO and if that's + * fine chains it to the existing lro_skb based on flowid. If an LRO for + * the flow doesn't exist create one. + **/ +static void igb_lro_receive(struct igb_q_vector *q_vector, + struct sk_buff *new_skb) +{ + struct sk_buff *lro_skb; + struct igb_lro_list *lrolist = &q_vector->lrolist; + struct igb_lrohdr *lroh = igb_lro_hdr(new_skb); + __be32 saddr = lroh->iph.saddr; + __be32 daddr = lroh->iph.daddr; + __be32 tcp_ports = *(__be32 *)&lroh->th; + u16 data_len; +#ifdef HAVE_VLAN_RX_REGISTER + u16 vid = IGB_CB(new_skb)->vid; +#else + u16 vid = new_skb->vlan_tci; +#endif + + igb_lro_header_ok(new_skb); + + /* + * we have a packet that might be eligible for LRO, + * so see if it matches anything we might expect + */ + skb_queue_walk(&lrolist->active, lro_skb) { + if (*(__be32 *)&igb_lro_hdr(lro_skb)->th != tcp_ports || + igb_lro_hdr(lro_skb)->iph.saddr != saddr || + igb_lro_hdr(lro_skb)->iph.daddr != daddr) + continue; + +#ifdef HAVE_VLAN_RX_REGISTER + if (IGB_CB(lro_skb)->vid != vid) +#else + if (lro_skb->vlan_tci != vid) +#endif + continue; + + /* out of order packet */ + if (IGB_CB(lro_skb)->next_seq != IGB_CB(new_skb)->next_seq) { + igb_lro_flush(q_vector, lro_skb); + IGB_CB(new_skb)->mss = 0; + break; + } + + /* TCP timestamp options have changed */ + if (!IGB_CB(lro_skb)->tsecr != !IGB_CB(new_skb)->tsecr) { + igb_lro_flush(q_vector, lro_skb); + break; + } + + /* make sure timestamp values are increasing */ + if (IGB_CB(lro_skb)->tsecr && + IGB_CB(lro_skb)->tsval > IGB_CB(new_skb)->tsval) { + igb_lro_flush(q_vector, lro_skb); + IGB_CB(new_skb)->mss = 0; + break; + } + + data_len = IGB_CB(new_skb)->mss; + + /* Check for all of the above below + * malformed header + * no tcp data + * resultant packet would be too large + * new skb is larger than our current mss + * data would remain in header + * we would consume more frags then the sk_buff contains + * ack sequence numbers changed + * window size has changed + */ + if (data_len == 0 || + data_len > IGB_CB(lro_skb)->mss || + data_len > IGB_CB(lro_skb)->free || +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + data_len != new_skb->data_len || + skb_shinfo(new_skb)->nr_frags >= + (MAX_SKB_FRAGS - skb_shinfo(lro_skb)->nr_frags) || +#endif + igb_lro_hdr(lro_skb)->th.ack_seq != lroh->th.ack_seq || + igb_lro_hdr(lro_skb)->th.window != lroh->th.window) { + igb_lro_flush(q_vector, lro_skb); + break; + } + + /* Remove IP and TCP header*/ + skb_pull(new_skb, new_skb->len - data_len); + + /* update timestamp and timestamp echo response */ + IGB_CB(lro_skb)->tsval = IGB_CB(new_skb)->tsval; + IGB_CB(lro_skb)->tsecr = IGB_CB(new_skb)->tsecr; + + /* update sequence and free space */ + IGB_CB(lro_skb)->next_seq += data_len; + IGB_CB(lro_skb)->free -= data_len; + + /* update append_cnt */ + IGB_CB(lro_skb)->append_cnt++; + +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + /* if header is empty pull pages into current skb */ + igb_merge_frags(lro_skb, new_skb); +#else + /* chain this new skb in frag_list */ + igb_add_active_tail(lro_skb, new_skb); +#endif + + if ((data_len < IGB_CB(lro_skb)->mss) || lroh->th.psh || + skb_shinfo(lro_skb)->nr_frags == MAX_SKB_FRAGS) { + igb_lro_hdr(lro_skb)->th.psh |= lroh->th.psh; + igb_lro_flush(q_vector, lro_skb); + } + + lrolist->stats.coal++; + return; + } + + if (IGB_CB(new_skb)->mss && !lroh->th.psh) { + /* if we are at capacity flush the tail */ + if (skb_queue_len(&lrolist->active) >= IGB_LRO_MAX) { + lro_skb = skb_peek_tail(&lrolist->active); + if (lro_skb) + igb_lro_flush(q_vector, lro_skb); + } + + /* update sequence and free space */ + IGB_CB(new_skb)->next_seq += IGB_CB(new_skb)->mss; + IGB_CB(new_skb)->free = 65521 - new_skb->len; + + /* .. and insert at the front of the active list */ + __skb_queue_head(&lrolist->active, new_skb); + + lrolist->stats.coal++; + return; + } + + /* packet not handled by any of the above, pass it to the stack */ +#ifdef HAVE_VLAN_RX_REGISTER + igb_receive_skb(q_vector, new_skb); +#else + napi_gro_receive(&q_vector->napi, new_skb); +#endif +} + +#endif /* IGB_NO_LRO */ +/** + * igb_process_skb_fields - Populate skb header fields from Rx descriptor + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being populated + * + * This function checks the ring, descriptor, and packet information in + * order to populate the hash, checksum, VLAN, timestamp, protocol, and + * other fields within the skb. + **/ +static void igb_process_skb_fields(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct net_device *dev = rx_ring->netdev; + __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; + +#ifdef NETIF_F_RXHASH + igb_rx_hash(rx_ring, rx_desc, skb); + +#endif + igb_rx_checksum(rx_ring, rx_desc, skb); + + /* update packet type stats */ + if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV4)) + rx_ring->rx_stats.ipv4_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV4_EX)) + rx_ring->rx_stats.ipv4e_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV6)) + rx_ring->rx_stats.ipv6_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV6_EX)) + rx_ring->rx_stats.ipv6e_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_TCP)) + rx_ring->rx_stats.tcp_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_UDP)) + rx_ring->rx_stats.udp_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_SCTP)) + rx_ring->rx_stats.sctp_packets++; + else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_NFS)) + rx_ring->rx_stats.nfs_packets++; + +#ifdef HAVE_PTP_1588_CLOCK + igb_ptp_rx_hwtstamp(rx_ring, rx_desc, skb); +#endif /* HAVE_PTP_1588_CLOCK */ + +#ifdef NETIF_F_HW_VLAN_CTAG_RX + if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) && +#else + if ((dev->features & NETIF_F_HW_VLAN_RX) && +#endif + igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) { + u16 vid = 0; + if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) && + test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &rx_ring->flags)) + vid = be16_to_cpu(rx_desc->wb.upper.vlan); + else + vid = le16_to_cpu(rx_desc->wb.upper.vlan); +#ifdef HAVE_VLAN_RX_REGISTER + IGB_CB(skb)->vid = vid; + } else { + IGB_CB(skb)->vid = 0; +#else + +#ifdef HAVE_VLAN_PROTOCOL + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); +#else + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); +#endif + + +#endif + } + + skb_record_rx_queue(skb, rx_ring->queue_index); + + skb->protocol = eth_type_trans(skb, dev); +} + +/** + * igb_is_non_eop - process handling of non-EOP buffers + * @rx_ring: Rx ring being processed + * @rx_desc: Rx descriptor for current buffer + * + * This function updates next to clean. If the buffer is an EOP buffer + * this function exits returning false, otherwise it will place the + * sk_buff in the next buffer to be chained and return true indicating + * that this is in fact a non-EOP buffer. + **/ +static bool igb_is_non_eop(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc) +{ + u32 ntc = rx_ring->next_to_clean + 1; + + /* fetch, update, and store next to clean */ + ntc = (ntc < rx_ring->count) ? ntc : 0; + rx_ring->next_to_clean = ntc; + + prefetch(IGB_RX_DESC(rx_ring, ntc)); + + if (likely(igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP))) + return false; + + return true; +} + +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT +/* igb_clean_rx_irq -- * legacy */ +static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, int budget) +{ + struct igb_ring *rx_ring = q_vector->rx.ring; + unsigned int total_bytes = 0, total_packets = 0; + u16 cleaned_count = igb_desc_unused(rx_ring); + + do { + struct igb_rx_buffer *rx_buffer; + union e1000_adv_rx_desc *rx_desc; + struct sk_buff *skb; + u16 ntc; + + /* return some buffers to hardware, one at a time is too slow */ + if (cleaned_count >= IGB_RX_BUFFER_WRITE) { + igb_alloc_rx_buffers(rx_ring, cleaned_count); + cleaned_count = 0; + } + + ntc = rx_ring->next_to_clean; + rx_desc = IGB_RX_DESC(rx_ring, ntc); + rx_buffer = &rx_ring->rx_buffer_info[ntc]; + + if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) + break; + + /* + * This memory barrier is needed to keep us from reading + * any other fields out of the rx_desc until we know the + * RXD_STAT_DD bit is set + */ + rmb(); + + skb = rx_buffer->skb; + + prefetch(skb->data); + + /* pull the header of the skb in */ + __skb_put(skb, le16_to_cpu(rx_desc->wb.upper.length)); + + /* clear skb reference in buffer info structure */ + rx_buffer->skb = NULL; + + cleaned_count++; + + BUG_ON(igb_is_non_eop(rx_ring, rx_desc)); + + dma_unmap_single(rx_ring->dev, rx_buffer->dma, + rx_ring->rx_buffer_len, + DMA_FROM_DEVICE); + rx_buffer->dma = 0; + + if (igb_test_staterr(rx_desc, + E1000_RXDEXT_ERR_FRAME_ERR_MASK)) { + dev_kfree_skb_any(skb); + continue; + } + + total_bytes += skb->len; + + /* populate checksum, timestamp, VLAN, and protocol */ + igb_process_skb_fields(rx_ring, rx_desc, skb); + +#ifndef IGB_NO_LRO + if (igb_can_lro(rx_ring, rx_desc, skb)) + igb_lro_receive(q_vector, skb); + else +#endif +#ifdef HAVE_VLAN_RX_REGISTER + igb_receive_skb(q_vector, skb); +#else + napi_gro_receive(&q_vector->napi, skb); +#endif + +#ifndef NETIF_F_GRO + netdev_ring(rx_ring)->last_rx = jiffies; + +#endif + /* update budget accounting */ + total_packets++; + } while (likely(total_packets < budget)); + + rx_ring->rx_stats.packets += total_packets; + rx_ring->rx_stats.bytes += total_bytes; + q_vector->rx.total_packets += total_packets; + q_vector->rx.total_bytes += total_bytes; + + if (cleaned_count) + igb_alloc_rx_buffers(rx_ring, cleaned_count); + +#ifndef IGB_NO_LRO + igb_lro_flush_all(q_vector); + +#endif /* IGB_NO_LRO */ + return total_packets < budget; +} +#else /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ +/** + * igb_get_headlen - determine size of header for LRO/GRO + * @data: pointer to the start of the headers + * @max_len: total length of section to find headers in + * + * This function is meant to determine the length of headers that will + * be recognized by hardware for LRO, and GRO offloads. The main + * motivation of doing this is to only perform one pull for IPv4 TCP + * packets so that we can do basic things like calculating the gso_size + * based on the average data per packet. + **/ +static unsigned int igb_get_headlen(unsigned char *data, + unsigned int max_len) +{ + union { + unsigned char *network; + /* l2 headers */ + struct ethhdr *eth; + struct vlan_hdr *vlan; + /* l3 headers */ + struct iphdr *ipv4; + struct ipv6hdr *ipv6; + } hdr; + __be16 protocol; + u8 nexthdr = 0; /* default to not TCP */ + u8 hlen; + + /* this should never happen, but better safe than sorry */ + if (max_len < ETH_HLEN) + return max_len; + + /* initialize network frame pointer */ + hdr.network = data; + + /* set first protocol and move network header forward */ + protocol = hdr.eth->h_proto; + hdr.network += ETH_HLEN; + + /* handle any vlan tag if present */ + if (protocol == __constant_htons(ETH_P_8021Q)) { + if ((hdr.network - data) > (max_len - VLAN_HLEN)) + return max_len; + + protocol = hdr.vlan->h_vlan_encapsulated_proto; + hdr.network += VLAN_HLEN; + } + + /* handle L3 protocols */ + if (protocol == __constant_htons(ETH_P_IP)) { + if ((hdr.network - data) > (max_len - sizeof(struct iphdr))) + return max_len; + + /* access ihl as a u8 to avoid unaligned access on ia64 */ + hlen = (hdr.network[0] & 0x0F) << 2; + + /* verify hlen meets minimum size requirements */ + if (hlen < sizeof(struct iphdr)) + return hdr.network - data; + + /* record next protocol if header is present */ + if (!(hdr.ipv4->frag_off & htons(IP_OFFSET))) + nexthdr = hdr.ipv4->protocol; +#ifdef NETIF_F_TSO6 + } else if (protocol == __constant_htons(ETH_P_IPV6)) { + if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr))) + return max_len; + + /* record next protocol */ + nexthdr = hdr.ipv6->nexthdr; + hlen = sizeof(struct ipv6hdr); +#endif /* NETIF_F_TSO6 */ + } else { + return hdr.network - data; + } + + /* relocate pointer to start of L4 header */ + hdr.network += hlen; + + /* finally sort out TCP */ + if (nexthdr == IPPROTO_TCP) { + if ((hdr.network - data) > (max_len - sizeof(struct tcphdr))) + return max_len; + + /* access doff as a u8 to avoid unaligned access on ia64 */ + hlen = (hdr.network[12] & 0xF0) >> 2; + + /* verify hlen meets minimum size requirements */ + if (hlen < sizeof(struct tcphdr)) + return hdr.network - data; + + hdr.network += hlen; + } else if (nexthdr == IPPROTO_UDP) { + if ((hdr.network - data) > (max_len - sizeof(struct udphdr))) + return max_len; + + hdr.network += sizeof(struct udphdr); + } + + /* + * If everything has gone correctly hdr.network should be the + * data section of the packet and will be the end of the header. + * If not then it probably represents the end of the last recognized + * header. + */ + if ((hdr.network - data) < max_len) + return hdr.network - data; + else + return max_len; +} + +/** + * igb_pull_tail - igb specific version of skb_pull_tail + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being adjusted + * + * This function is an igb specific version of __pskb_pull_tail. The + * main difference between this version and the original function is that + * this function can make several assumptions about the state of things + * that allow for significant optimizations versus the standard function. + * As a result we can do things like drop a frag and maintain an accurate + * truesize for the skb. + */ +static void igb_pull_tail(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; + unsigned char *va; + unsigned int pull_len; + + /* + * it is valid to use page_address instead of kmap since we are + * working with pages allocated out of the lomem pool per + * alloc_page(GFP_ATOMIC) + */ + va = skb_frag_address(frag); + +#ifdef HAVE_PTP_1588_CLOCK + if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { + /* retrieve timestamp from buffer */ + igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb); + + /* update pointers to remove timestamp header */ + skb_frag_size_sub(frag, IGB_TS_HDR_LEN); + frag->page_offset += IGB_TS_HDR_LEN; + skb->data_len -= IGB_TS_HDR_LEN; + skb->len -= IGB_TS_HDR_LEN; + + /* move va to start of packet data */ + va += IGB_TS_HDR_LEN; + } +#endif /* HAVE_PTP_1588_CLOCK */ + + /* + * we need the header to contain the greater of either ETH_HLEN or + * 60 bytes if the skb->len is less than 60 for skb_pad. + */ + pull_len = igb_get_headlen(va, IGB_RX_HDR_LEN); + + /* align pull length to size of long to optimize memcpy performance */ + skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long))); + + /* update all of the pointers */ + skb_frag_size_sub(frag, pull_len); + frag->page_offset += pull_len; + skb->data_len -= pull_len; + skb->tail += pull_len; +} + +/** + * igb_cleanup_headers - Correct corrupted or empty headers + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being fixed + * + * Address the case where we are pulling data in on pages only + * and as such no data is present in the skb header. + * + * In addition if skb is not at least 60 bytes we need to pad it so that + * it is large enough to qualify as a valid Ethernet frame. + * + * Returns true if an error was encountered and skb was freed. + **/ +static bool igb_cleanup_headers(struct igb_ring *rx_ring, + union e1000_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + + if (unlikely((igb_test_staterr(rx_desc, + E1000_RXDEXT_ERR_FRAME_ERR_MASK)))) { + struct net_device *netdev = rx_ring->netdev; + if (!(netdev->features & NETIF_F_RXALL)) { + dev_kfree_skb_any(skb); + return true; + } + } + + /* place header in linear portion of buffer */ + if (skb_is_nonlinear(skb)) + igb_pull_tail(rx_ring, rx_desc, skb); + + /* if skb_pad returns an error the skb was freed */ + if (unlikely(skb->len < 60)) { + int pad_len = 60 - skb->len; + + if (skb_pad(skb, pad_len)) + return true; + __skb_put(skb, pad_len); + } + + return false; +} + +/* igb_clean_rx_irq -- * packet split */ +static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, int budget) +{ + struct igb_ring *rx_ring = q_vector->rx.ring; + struct sk_buff *skb = rx_ring->skb; + unsigned int total_bytes = 0, total_packets = 0; + u16 cleaned_count = igb_desc_unused(rx_ring); + + do { + union e1000_adv_rx_desc *rx_desc; + + /* return some buffers to hardware, one at a time is too slow */ + if (cleaned_count >= IGB_RX_BUFFER_WRITE) { + igb_alloc_rx_buffers(rx_ring, cleaned_count); + cleaned_count = 0; + } + + rx_desc = IGB_RX_DESC(rx_ring, rx_ring->next_to_clean); + + if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) + break; + + /* + * This memory barrier is needed to keep us from reading + * any other fields out of the rx_desc until we know the + * RXD_STAT_DD bit is set + */ + rmb(); + + /* retrieve a buffer from the ring */ + skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb); + + /* exit if we failed to retrieve a buffer */ + if (!skb) + break; + + cleaned_count++; + + /* fetch next buffer in frame if non-eop */ + if (igb_is_non_eop(rx_ring, rx_desc)) + continue; + + /* verify the packet layout is correct */ + if (igb_cleanup_headers(rx_ring, rx_desc, skb)) { + skb = NULL; + continue; + } + + /* probably a little skewed due to removing CRC */ + total_bytes += skb->len; + + /* populate checksum, timestamp, VLAN, and protocol */ + igb_process_skb_fields(rx_ring, rx_desc, skb); + +#ifndef IGB_NO_LRO + if (igb_can_lro(rx_ring, rx_desc, skb)) + igb_lro_receive(q_vector, skb); + else +#endif +#ifdef HAVE_VLAN_RX_REGISTER + igb_receive_skb(q_vector, skb); +#else + napi_gro_receive(&q_vector->napi, skb); +#endif +#ifndef NETIF_F_GRO + + netdev_ring(rx_ring)->last_rx = jiffies; +#endif + + /* reset skb pointer */ + skb = NULL; + + /* update budget accounting */ + total_packets++; + } while (likely(total_packets < budget)); + + /* place incomplete frames back on ring for completion */ + rx_ring->skb = skb; + + rx_ring->rx_stats.packets += total_packets; + rx_ring->rx_stats.bytes += total_bytes; + q_vector->rx.total_packets += total_packets; + q_vector->rx.total_bytes += total_bytes; + + if (cleaned_count) + igb_alloc_rx_buffers(rx_ring, cleaned_count); + +#ifndef IGB_NO_LRO + igb_lro_flush_all(q_vector); + +#endif /* IGB_NO_LRO */ + return total_packets < budget; +} +#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ + +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT +static bool igb_alloc_mapped_skb(struct igb_ring *rx_ring, + struct igb_rx_buffer *bi) +{ + struct sk_buff *skb = bi->skb; + dma_addr_t dma = bi->dma; + + if (dma) + return true; + + if (likely(!skb)) { + skb = netdev_alloc_skb_ip_align(netdev_ring(rx_ring), + rx_ring->rx_buffer_len); + bi->skb = skb; + if (!skb) { + rx_ring->rx_stats.alloc_failed++; + return false; + } + + /* initialize skb for ring */ + skb_record_rx_queue(skb, ring_queue_index(rx_ring)); + } + + dma = dma_map_single(rx_ring->dev, skb->data, + rx_ring->rx_buffer_len, DMA_FROM_DEVICE); + + /* if mapping failed free memory back to system since + * there isn't much point in holding memory we can't use + */ + if (dma_mapping_error(rx_ring->dev, dma)) { + dev_kfree_skb_any(skb); + bi->skb = NULL; + + rx_ring->rx_stats.alloc_failed++; + return false; + } + + bi->dma = dma; + return true; +} + +#else /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ +static bool igb_alloc_mapped_page(struct igb_ring *rx_ring, + struct igb_rx_buffer *bi) +{ + struct page *page = bi->page; + dma_addr_t dma; + + /* since we are recycling buffers we should seldom need to alloc */ + if (likely(page)) + return true; + + /* alloc new page for storage */ + page = alloc_page(GFP_ATOMIC | __GFP_COLD); + if (unlikely(!page)) { + rx_ring->rx_stats.alloc_failed++; + return false; + } + + /* map page for use */ + dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE); + + /* + * if mapping failed free memory back to system since + * there isn't much point in holding memory we can't use + */ + if (dma_mapping_error(rx_ring->dev, dma)) { + __free_page(page); + + rx_ring->rx_stats.alloc_failed++; + return false; + } + + bi->dma = dma; + bi->page = page; + bi->page_offset = 0; + + return true; +} + +#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ +/** + * igb_alloc_rx_buffers - Replace used receive buffers; packet split + * @adapter: address of board private structure + **/ +void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count) +{ + union e1000_adv_rx_desc *rx_desc; + struct igb_rx_buffer *bi; + u16 i = rx_ring->next_to_use; + + /* nothing to do */ + if (!cleaned_count) + return; + + rx_desc = IGB_RX_DESC(rx_ring, i); + bi = &rx_ring->rx_buffer_info[i]; + i -= rx_ring->count; + + do { +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + if (!igb_alloc_mapped_skb(rx_ring, bi)) +#else + if (!igb_alloc_mapped_page(rx_ring, bi)) +#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ + break; + + /* + * Refresh the desc even if buffer_addrs didn't change + * because each write-back erases this info. + */ +#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT + rx_desc->read.pkt_addr = cpu_to_le64(bi->dma); +#else + rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); +#endif + + rx_desc++; + bi++; + i++; + if (unlikely(!i)) { + rx_desc = IGB_RX_DESC(rx_ring, 0); + bi = rx_ring->rx_buffer_info; + i -= rx_ring->count; + } + + /* clear the hdr_addr for the next_to_use descriptor */ + rx_desc->read.hdr_addr = 0; + + cleaned_count--; + } while (cleaned_count); + + i += rx_ring->count; + + if (rx_ring->next_to_use != i) { + /* record the next descriptor to use */ + rx_ring->next_to_use = i; + +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT + /* update next to alloc since we have filled the ring */ + rx_ring->next_to_alloc = i; + +#endif + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + writel(i, rx_ring->tail); + } +} + +#ifdef SIOCGMIIPHY +/** + * igb_mii_ioctl - + * @netdev: + * @ifreq: + * @cmd: + **/ +static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct mii_ioctl_data *data = if_mii(ifr); + + if (adapter->hw.phy.media_type != e1000_media_type_copper) + return -EOPNOTSUPP; + + switch (cmd) { + case SIOCGMIIPHY: + data->phy_id = adapter->hw.phy.addr; + break; + case SIOCGMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, + &data->val_out)) + return -EIO; + break; + case SIOCSMIIREG: + default: + return -EOPNOTSUPP; + } + return E1000_SUCCESS; +} + +#endif +/** + * igb_ioctl - + * @netdev: + * @ifreq: + * @cmd: + **/ +static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { +#ifdef SIOCGMIIPHY + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + return igb_mii_ioctl(netdev, ifr, cmd); +#endif +#ifdef HAVE_PTP_1588_CLOCK + case SIOCSHWTSTAMP: + return igb_ptp_hwtstamp_ioctl(netdev, ifr, cmd); +#endif /* HAVE_PTP_1588_CLOCK */ +#ifdef ETHTOOL_OPS_COMPAT + case SIOCETHTOOL: + return ethtool_ioctl(ifr); +#endif + default: + return -EOPNOTSUPP; + } +} + +s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + struct igb_adapter *adapter = hw->back; + u16 cap_offset; + + cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); + if (!cap_offset) + return -E1000_ERR_CONFIG; + + pci_read_config_word(adapter->pdev, cap_offset + reg, value); + + return E1000_SUCCESS; +} + +s32 e1000_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) +{ + struct igb_adapter *adapter = hw->back; + u16 cap_offset; + + cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); + if (!cap_offset) + return -E1000_ERR_CONFIG; + + pci_write_config_word(adapter->pdev, cap_offset + reg, *value); + + return E1000_SUCCESS; +} + +#ifdef HAVE_VLAN_RX_REGISTER +static void igb_vlan_mode(struct net_device *netdev, struct vlan_group *vlgrp) +#else +void igb_vlan_mode(struct net_device *netdev, u32 features) +#endif +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ctrl, rctl; + int i; +#ifdef HAVE_VLAN_RX_REGISTER + bool enable = !!vlgrp; + + igb_irq_disable(adapter); + + adapter->vlgrp = vlgrp; + + if (!test_bit(__IGB_DOWN, &adapter->state)) + igb_irq_enable(adapter); +#else +#ifdef NETIF_F_HW_VLAN_CTAG_RX + bool enable = !!(features & NETIF_F_HW_VLAN_CTAG_RX); +#else + bool enable = !!(features & NETIF_F_HW_VLAN_RX); +#endif +#endif + + if (enable) { + /* enable VLAN tag insert/strip */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl |= E1000_CTRL_VME; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Disable CFI check */ + rctl = E1000_READ_REG(hw, E1000_RCTL); + rctl &= ~E1000_RCTL_CFIEN; + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + } else { + /* disable VLAN tag insert/strip */ + ctrl = E1000_READ_REG(hw, E1000_CTRL); + ctrl &= ~E1000_CTRL_VME; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + } + +#ifndef CONFIG_IGB_VMDQ_NETDEV + for (i = 0; i < adapter->vmdq_pools; i++) { + igb_set_vf_vlan_strip(adapter, + adapter->vfs_allocated_count + i, + enable); + } + +#else + igb_set_vf_vlan_strip(adapter, + adapter->vfs_allocated_count, + enable); + + for (i = 1; i < adapter->vmdq_pools; i++) { +#ifdef HAVE_VLAN_RX_REGISTER + struct igb_vmdq_adapter *vadapter; + vadapter = netdev_priv(adapter->vmdq_netdev[i-1]); + enable = !!vadapter->vlgrp; +#else + struct net_device *vnetdev; + vnetdev = adapter->vmdq_netdev[i-1]; +#ifdef NETIF_F_HW_VLAN_CTAG_RX + enable = !!(vnetdev->features & NETIF_F_HW_VLAN_CTAG_RX); +#else + enable = !!(vnetdev->features & NETIF_F_HW_VLAN_RX); +#endif +#endif + igb_set_vf_vlan_strip(adapter, + adapter->vfs_allocated_count + i, + enable); + } + +#endif + igb_rlpml_set(adapter); +} + +#ifdef HAVE_VLAN_PROTOCOL +static int igb_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid) +#elif defined HAVE_INT_NDO_VLAN_RX_ADD_VID +#ifdef NETIF_F_HW_VLAN_CTAG_RX +static int igb_vlan_rx_add_vid(struct net_device *netdev, + __always_unused __be16 proto, u16 vid) +#else +static int igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +#endif +#else +static void igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +#endif +{ + struct igb_adapter *adapter = netdev_priv(netdev); + int pf_id = adapter->vfs_allocated_count; + + /* attempt to add filter to vlvf array */ + igb_vlvf_set(adapter, vid, TRUE, pf_id); + + /* add the filter since PF can receive vlans w/o entry in vlvf */ + igb_vfta_set(adapter, vid, TRUE); +#ifndef HAVE_NETDEV_VLAN_FEATURES + + /* Copy feature flags from netdev to the vlan netdev for this vid. + * This allows things like TSO to bubble down to our vlan device. + * There is no need to update netdev for vlan 0 (DCB), since it + * wouldn't has v_netdev. + */ + if (adapter->vlgrp) { + struct vlan_group *vlgrp = adapter->vlgrp; + struct net_device *v_netdev = vlan_group_get_device(vlgrp, vid); + if (v_netdev) { + v_netdev->features |= netdev->features; + vlan_group_set_device(vlgrp, vid, v_netdev); + } + } +#endif +#ifndef HAVE_VLAN_RX_REGISTER + + set_bit(vid, adapter->active_vlans); +#endif +#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID + return 0; +#endif +} + +#ifdef HAVE_VLAN_PROTOCOL +static int igb_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid) +#elif defined HAVE_INT_NDO_VLAN_RX_ADD_VID +#ifdef NETIF_F_HW_VLAN_CTAG_RX +static int igb_vlan_rx_kill_vid(struct net_device *netdev, + __always_unused __be16 proto, u16 vid) +#else +static int igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +#endif +#else +static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +#endif +{ + struct igb_adapter *adapter = netdev_priv(netdev); + int pf_id = adapter->vfs_allocated_count; + s32 err; + +#ifdef HAVE_VLAN_RX_REGISTER + igb_irq_disable(adapter); + + vlan_group_set_device(adapter->vlgrp, vid, NULL); + + if (!test_bit(__IGB_DOWN, &adapter->state)) + igb_irq_enable(adapter); + +#endif /* HAVE_VLAN_RX_REGISTER */ + /* remove vlan from VLVF table array */ + err = igb_vlvf_set(adapter, vid, FALSE, pf_id); + + /* if vid was not present in VLVF just remove it from table */ + if (err) + igb_vfta_set(adapter, vid, FALSE); +#ifndef HAVE_VLAN_RX_REGISTER + + clear_bit(vid, adapter->active_vlans); +#endif +#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID + return 0; +#endif +} + +static void igb_restore_vlan(struct igb_adapter *adapter) +{ +#ifdef HAVE_VLAN_RX_REGISTER + igb_vlan_mode(adapter->netdev, adapter->vlgrp); + + if (adapter->vlgrp) { + u16 vid; + for (vid = 0; vid < VLAN_N_VID; vid++) { + if (!vlan_group_get_device(adapter->vlgrp, vid)) + continue; +#ifdef NETIF_F_HW_VLAN_CTAG_RX + igb_vlan_rx_add_vid(adapter->netdev, + htons(ETH_P_8021Q), vid); +#else + igb_vlan_rx_add_vid(adapter->netdev, vid); +#endif + } + } +#else + u16 vid; + + igb_vlan_mode(adapter->netdev, adapter->netdev->features); + + for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) +#ifdef NETIF_F_HW_VLAN_CTAG_RX + igb_vlan_rx_add_vid(adapter->netdev, + htons(ETH_P_8021Q), vid); +#else + igb_vlan_rx_add_vid(adapter->netdev, vid); +#endif +#endif +} + +int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx) +{ + struct pci_dev *pdev = adapter->pdev; + struct e1000_mac_info *mac = &adapter->hw.mac; + + mac->autoneg = 0; + + /* SerDes device's does not support 10Mbps Full/duplex + * and 100Mbps Half duplex + */ + if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) { + switch (spddplx) { + case SPEED_10 + DUPLEX_HALF: + case SPEED_10 + DUPLEX_FULL: + case SPEED_100 + DUPLEX_HALF: + dev_err(pci_dev_to_dev(pdev), + "Unsupported Speed/Duplex configuration\n"); + return -EINVAL; + default: + break; + } + } + + switch (spddplx) { + case SPEED_10 + DUPLEX_HALF: + mac->forced_speed_duplex = ADVERTISE_10_HALF; + break; + case SPEED_10 + DUPLEX_FULL: + mac->forced_speed_duplex = ADVERTISE_10_FULL; + break; + case SPEED_100 + DUPLEX_HALF: + mac->forced_speed_duplex = ADVERTISE_100_HALF; + break; + case SPEED_100 + DUPLEX_FULL: + mac->forced_speed_duplex = ADVERTISE_100_FULL; + break; + case SPEED_1000 + DUPLEX_FULL: + mac->autoneg = 1; + adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL; + break; + case SPEED_1000 + DUPLEX_HALF: /* not supported */ + default: + dev_err(pci_dev_to_dev(pdev), "Unsupported Speed/Duplex configuration\n"); + return -EINVAL; + } + + /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */ + adapter->hw.phy.mdix = AUTO_ALL_MODES; + + return 0; +} + +static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake, + bool runtime) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 ctrl, rctl, status; + u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; +#ifdef CONFIG_PM + int retval = 0; +#endif + + netif_device_detach(netdev); + + status = E1000_READ_REG(hw, E1000_STATUS); + if (status & E1000_STATUS_LU) + wufc &= ~E1000_WUFC_LNKC; + + if (netif_running(netdev)) + __igb_close(netdev, true); + + igb_clear_interrupt_scheme(adapter); + +#ifdef CONFIG_PM + retval = pci_save_state(pdev); + if (retval) + return retval; +#endif + + if (wufc) { + igb_setup_rctl(adapter); + igb_set_rx_mode(netdev); + + /* turn on all-multi mode if wake on multicast is enabled */ + if (wufc & E1000_WUFC_MC) { + rctl = E1000_READ_REG(hw, E1000_RCTL); + rctl |= E1000_RCTL_MPE; + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + } + + ctrl = E1000_READ_REG(hw, E1000_CTRL); + /* phy power management enable */ + #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 + ctrl |= E1000_CTRL_ADVD3WUC; + E1000_WRITE_REG(hw, E1000_CTRL, ctrl); + + /* Allow time for pending master requests to run */ + e1000_disable_pcie_master(hw); + + E1000_WRITE_REG(hw, E1000_WUC, E1000_WUC_PME_EN); + E1000_WRITE_REG(hw, E1000_WUFC, wufc); + } else { + E1000_WRITE_REG(hw, E1000_WUC, 0); + E1000_WRITE_REG(hw, E1000_WUFC, 0); + } + + *enable_wake = wufc || adapter->en_mng_pt; + if (!*enable_wake) + igb_power_down_link(adapter); + else + igb_power_up_link(adapter); + + /* Release control of h/w to f/w. If f/w is AMT enabled, this + * would have already happened in close and is redundant. */ + igb_release_hw_control(adapter); + + pci_disable_device(pdev); + + return 0; +} + +#ifdef CONFIG_PM +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS +static int igb_suspend(struct device *dev) +#else +static int igb_suspend(struct pci_dev *pdev, pm_message_t state) +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ +{ +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS + struct pci_dev *pdev = to_pci_dev(dev); +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ + int retval; + bool wake; + + retval = __igb_shutdown(pdev, &wake, 0); + if (retval) + return retval; + + if (wake) { + pci_prepare_to_sleep(pdev); + } else { + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + } + + return 0; +} + +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS +static int igb_resume(struct device *dev) +#else +static int igb_resume(struct pci_dev *pdev) +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ +{ +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS + struct pci_dev *pdev = to_pci_dev(dev); +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_save_state(pdev); + + err = pci_enable_device_mem(pdev); + if (err) { + dev_err(pci_dev_to_dev(pdev), + "igb: Cannot enable PCI device from suspend\n"); + return err; + } + pci_set_master(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + if (igb_init_interrupt_scheme(adapter, true)) { + dev_err(pci_dev_to_dev(pdev), "Unable to allocate memory for queues\n"); + return -ENOMEM; + } + + igb_reset(adapter); + + /* let the f/w know that the h/w is now under the control of the + * driver. */ + igb_get_hw_control(adapter); + + E1000_WRITE_REG(hw, E1000_WUS, ~0); + + if (netdev->flags & IFF_UP) { + rtnl_lock(); + err = __igb_open(netdev, true); + rtnl_unlock(); + if (err) + return err; + } + + netif_device_attach(netdev); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME +#ifdef HAVE_SYSTEM_SLEEP_PM_OPS +static int igb_runtime_idle(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + + if (!igb_has_link(adapter)) + pm_schedule_suspend(dev, MSEC_PER_SEC * 5); + + return -EBUSY; +} + +static int igb_runtime_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int retval; + bool wake; + + retval = __igb_shutdown(pdev, &wake, 1); + if (retval) + return retval; + + if (wake) { + pci_prepare_to_sleep(pdev); + } else { + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + } + + return 0; +} + +static int igb_runtime_resume(struct device *dev) +{ + return igb_resume(dev); +} +#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ +#endif /* CONFIG_PM_RUNTIME */ +#endif /* CONFIG_PM */ + +#ifdef USE_REBOOT_NOTIFIER +/* only want to do this for 2.4 kernels? */ +static int igb_notify_reboot(struct notifier_block *nb, unsigned long event, + void *p) +{ + struct pci_dev *pdev = NULL; + bool wake; + + switch (event) { + case SYS_DOWN: + case SYS_HALT: + case SYS_POWER_OFF: + while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) { + if (pci_dev_driver(pdev) == &igb_driver) { + __igb_shutdown(pdev, &wake, 0); + if (event == SYS_POWER_OFF) { + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); + } + } + } + } + return NOTIFY_DONE; +} +#else +static void igb_shutdown(struct pci_dev *pdev) +{ + bool wake = false; + + __igb_shutdown(pdev, &wake, 0); + + if (system_state == SYSTEM_POWER_OFF) { + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); + } +} +#endif /* USE_REBOOT_NOTIFIER */ + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void igb_netpoll(struct net_device *netdev) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + struct igb_q_vector *q_vector; + int i; + + for (i = 0; i < adapter->num_q_vectors; i++) { + q_vector = adapter->q_vector[i]; + if (adapter->msix_entries) + E1000_WRITE_REG(hw, E1000_EIMC, q_vector->eims_value); + else + igb_irq_disable(adapter); + napi_schedule(&q_vector->napi); + } +} +#endif /* CONFIG_NET_POLL_CONTROLLER */ + +#ifdef HAVE_PCI_ERS +#define E1000_DEV_ID_82576_VF 0x10CA +/** + * igb_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + +#ifdef CONFIG_PCI_IOV__UNUSED + struct pci_dev *bdev, *vfdev; + u32 dw0, dw1, dw2, dw3; + int vf, pos; + u16 req_id, pf_func; + + if (!(adapter->flags & IGB_FLAG_DETECT_BAD_DMA)) + goto skip_bad_vf_detection; + + bdev = pdev->bus->self; + while (bdev && (pci_pcie_type(bdev) != PCI_EXP_TYPE_ROOT_PORT)) + bdev = bdev->bus->self; + + if (!bdev) + goto skip_bad_vf_detection; + + pos = pci_find_ext_capability(bdev, PCI_EXT_CAP_ID_ERR); + if (!pos) + goto skip_bad_vf_detection; + + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG, &dw0); + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 4, &dw1); + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 8, &dw2); + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 12, &dw3); + + req_id = dw1 >> 16; + /* On the 82576 if bit 7 of the requestor ID is set then it's a VF */ + if (!(req_id & 0x0080)) + goto skip_bad_vf_detection; + + pf_func = req_id & 0x01; + if ((pf_func & 1) == (pdev->devfn & 1)) { + + vf = (req_id & 0x7F) >> 1; + dev_err(pci_dev_to_dev(pdev), + "VF %d has caused a PCIe error\n", vf); + dev_err(pci_dev_to_dev(pdev), + "TLP: dw0: %8.8x\tdw1: %8.8x\tdw2: " + "%8.8x\tdw3: %8.8x\n", + dw0, dw1, dw2, dw3); + + /* Find the pci device of the offending VF */ + vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, + E1000_DEV_ID_82576_VF, NULL); + while (vfdev) { + if (vfdev->devfn == (req_id & 0xFF)) + break; + vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, + E1000_DEV_ID_82576_VF, vfdev); + } + /* + * There's a slim chance the VF could have been hot plugged, + * so if it is no longer present we don't need to issue the + * VFLR. Just clean up the AER in that case. + */ + if (vfdev) { + dev_err(pci_dev_to_dev(pdev), + "Issuing VFLR to VF %d\n", vf); + pci_write_config_dword(vfdev, 0xA8, 0x00008000); + } + + pci_cleanup_aer_uncorrect_error_status(pdev); + } + + /* + * Even though the error may have occurred on the other port + * we still need to increment the vf error reference count for + * both ports because the I/O resume function will be called + * for both of them. + */ + adapter->vferr_refcount++; + + return PCI_ERS_RESULT_RECOVERED; + +skip_bad_vf_detection: +#endif /* CONFIG_PCI_IOV */ + + netif_device_detach(netdev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (netif_running(netdev)) + igb_down(adapter); + pci_disable_device(pdev); + + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * igb_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. Implementation + * resembles the first-half of the igb_resume routine. + */ +static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + pci_ers_result_t result; + + if (pci_enable_device_mem(pdev)) { + dev_err(pci_dev_to_dev(pdev), + "Cannot re-enable PCI device after reset.\n"); + result = PCI_ERS_RESULT_DISCONNECT; + } else { + pci_set_master(pdev); + pci_restore_state(pdev); + pci_save_state(pdev); + + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); + + schedule_work(&adapter->reset_task); + E1000_WRITE_REG(hw, E1000_WUS, ~0); + result = PCI_ERS_RESULT_RECOVERED; + } + + pci_cleanup_aer_uncorrect_error_status(pdev); + + return result; +} + +/** + * igb_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. Implementation resembles the + * second-half of the igb_resume routine. + */ +static void igb_io_resume(struct pci_dev *pdev) +{ + struct net_device *netdev = pci_get_drvdata(pdev); + struct igb_adapter *adapter = netdev_priv(netdev); + + if (adapter->vferr_refcount) { + dev_info(pci_dev_to_dev(pdev), "Resuming after VF err\n"); + adapter->vferr_refcount--; + return; + } + + if (netif_running(netdev)) { + if (igb_up(adapter)) { + dev_err(pci_dev_to_dev(pdev), "igb_up failed after reset\n"); + return; + } + } + + netif_device_attach(netdev); + + /* let the f/w know that the h/w is now under the control of the + * driver. */ + igb_get_hw_control(adapter); +} + +#endif /* HAVE_PCI_ERS */ + +int igb_add_mac_filter(struct igb_adapter *adapter, u8 *addr, u16 queue) +{ + struct e1000_hw *hw = &adapter->hw; + int i; + + if (is_zero_ether_addr(addr)) + return 0; + + for (i = 0; i < hw->mac.rar_entry_count; i++) { + if (adapter->mac_table[i].state & IGB_MAC_STATE_IN_USE) + continue; + adapter->mac_table[i].state = (IGB_MAC_STATE_MODIFIED | + IGB_MAC_STATE_IN_USE); + memcpy(adapter->mac_table[i].addr, addr, ETH_ALEN); + adapter->mac_table[i].queue = queue; + igb_sync_mac_table(adapter); + return 0; + } + return -ENOMEM; +} +int igb_del_mac_filter(struct igb_adapter *adapter, u8* addr, u16 queue) +{ + /* search table for addr, if found, set to 0 and sync */ + int i; + struct e1000_hw *hw = &adapter->hw; + + if (is_zero_ether_addr(addr)) + return 0; + for (i = 0; i < hw->mac.rar_entry_count; i++) { + if (ether_addr_equal(addr, adapter->mac_table[i].addr) && + adapter->mac_table[i].queue == queue) { + adapter->mac_table[i].state = IGB_MAC_STATE_MODIFIED; + memset(adapter->mac_table[i].addr, 0, ETH_ALEN); + adapter->mac_table[i].queue = 0; + igb_sync_mac_table(adapter); + return 0; + } + } + return -ENOMEM; +} +static int igb_set_vf_mac(struct igb_adapter *adapter, + int vf, unsigned char *mac_addr) +{ + igb_del_mac_filter(adapter, adapter->vf_data[vf].vf_mac_addresses, vf); + memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN); + + igb_add_mac_filter(adapter, mac_addr, vf); + + return 0; +} + +#ifdef IFLA_VF_MAX +static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count)) + return -EINVAL; + adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC; + dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf); + dev_info(&adapter->pdev->dev, "Reload the VF driver to make this" + " change effective.\n"); + if (test_bit(__IGB_DOWN, &adapter->state)) { + dev_warn(&adapter->pdev->dev, "The VF MAC address has been set," + " but the PF device is not up.\n"); + dev_warn(&adapter->pdev->dev, "Bring the PF device up before" + " attempting to use the VF device.\n"); + } + return igb_set_vf_mac(adapter, vf, mac); +} + +static int igb_link_mbps(int internal_link_speed) +{ + switch (internal_link_speed) { + case SPEED_100: + return 100; + case SPEED_1000: + return 1000; + case SPEED_2500: + return 2500; + default: + return 0; + } +} + +static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate, + int link_speed) +{ + int rf_dec, rf_int; + u32 bcnrc_val; + + if (tx_rate != 0) { + /* Calculate the rate factor values to set */ + rf_int = link_speed / tx_rate; + rf_dec = (link_speed - (rf_int * tx_rate)); + rf_dec = (rf_dec * (1<<E1000_RTTBCNRC_RF_INT_SHIFT)) / tx_rate; + + bcnrc_val = E1000_RTTBCNRC_RS_ENA; + bcnrc_val |= ((rf_int<<E1000_RTTBCNRC_RF_INT_SHIFT) & + E1000_RTTBCNRC_RF_INT_MASK); + bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK); + } else { + bcnrc_val = 0; + } + + E1000_WRITE_REG(hw, E1000_RTTDQSEL, vf); /* vf X uses queue X */ + /* + * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM + * register. MMW_SIZE=0x014 if 9728-byte jumbo is supported. + */ + E1000_WRITE_REG(hw, E1000_RTTBCNRM(0), 0x14); + E1000_WRITE_REG(hw, E1000_RTTBCNRC, bcnrc_val); +} + +static void igb_check_vf_rate_limit(struct igb_adapter *adapter) +{ + int actual_link_speed, i; + bool reset_rate = false; + + /* VF TX rate limit was not set */ + if ((adapter->vf_rate_link_speed == 0) || + (adapter->hw.mac.type != e1000_82576)) + return; + + actual_link_speed = igb_link_mbps(adapter->link_speed); + if (actual_link_speed != adapter->vf_rate_link_speed) { + reset_rate = true; + adapter->vf_rate_link_speed = 0; + dev_info(&adapter->pdev->dev, + "Link speed has been changed. VF Transmit rate is disabled\n"); + } + + for (i = 0; i < adapter->vfs_allocated_count; i++) { + if (reset_rate) + adapter->vf_data[i].tx_rate = 0; + + igb_set_vf_rate_limit(&adapter->hw, i, + adapter->vf_data[i].tx_rate, actual_link_speed); + } +} + +#ifdef HAVE_VF_MIN_MAX_TXRATE +static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate, + int tx_rate) +#else /* HAVE_VF_MIN_MAX_TXRATE */ +static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate) +#endif /* HAVE_VF_MIN_MAX_TXRATE */ +{ + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + int actual_link_speed; + + if (hw->mac.type != e1000_82576) + return -EOPNOTSUPP; + +#ifdef HAVE_VF_MIN_MAX_TXRATE + if (min_tx_rate) + return -EINVAL; +#endif /* HAVE_VF_MIN_MAX_TXRATE */ + + actual_link_speed = igb_link_mbps(adapter->link_speed); + if ((vf >= adapter->vfs_allocated_count) || + (!(E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) || + (tx_rate < 0) || (tx_rate > actual_link_speed)) + return -EINVAL; + + adapter->vf_rate_link_speed = actual_link_speed; + adapter->vf_data[vf].tx_rate = (u16)tx_rate; + igb_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed); + + return 0; +} + +static int igb_ndo_get_vf_config(struct net_device *netdev, + int vf, struct ifla_vf_info *ivi) +{ + struct igb_adapter *adapter = netdev_priv(netdev); + if (vf >= adapter->vfs_allocated_count) + return -EINVAL; + ivi->vf = vf; + memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN); +#ifdef HAVE_VF_MIN_MAX_TXRATE + ivi->max_tx_rate = adapter->vf_data[vf].tx_rate; + ivi->min_tx_rate = 0; +#else /* HAVE_VF_MIN_MAX_TXRATE */ + ivi->tx_rate = adapter->vf_data[vf].tx_rate; +#endif /* HAVE_VF_MIN_MAX_TXRATE */ + ivi->vlan = adapter->vf_data[vf].pf_vlan; + ivi->qos = adapter->vf_data[vf].pf_qos; +#ifdef HAVE_VF_SPOOFCHK_CONFIGURE + ivi->spoofchk = adapter->vf_data[vf].spoofchk_enabled; +#endif + return 0; +} +#endif +static void igb_vmm_control(struct igb_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int count; + u32 reg; + + switch (hw->mac.type) { + case e1000_82575: + default: + /* replication is not supported for 82575 */ + return; + case e1000_82576: + /* notify HW that the MAC is adding vlan tags */ + reg = E1000_READ_REG(hw, E1000_DTXCTL); + reg |= (E1000_DTXCTL_VLAN_ADDED | + E1000_DTXCTL_SPOOF_INT); + E1000_WRITE_REG(hw, E1000_DTXCTL, reg); + case e1000_82580: + /* enable replication vlan tag stripping */ + reg = E1000_READ_REG(hw, E1000_RPLOLR); + reg |= E1000_RPLOLR_STRVLAN; + E1000_WRITE_REG(hw, E1000_RPLOLR, reg); + case e1000_i350: + case e1000_i354: + /* none of the above registers are supported by i350 */ + break; + } + + /* Enable Malicious Driver Detection */ + if ((adapter->vfs_allocated_count) && + (adapter->mdd)) { + if (hw->mac.type == e1000_i350) + igb_enable_mdd(adapter); + } + + /* enable replication and loopback support */ + count = adapter->vfs_allocated_count || adapter->vmdq_pools; + if (adapter->flags & IGB_FLAG_LOOPBACK_ENABLE && count) + e1000_vmdq_set_loopback_pf(hw, 1); + e1000_vmdq_set_anti_spoofing_pf(hw, + adapter->vfs_allocated_count || adapter->vmdq_pools, + adapter->vfs_allocated_count); + e1000_vmdq_set_replication_pf(hw, adapter->vfs_allocated_count || + adapter->vmdq_pools); +} + +static void igb_init_fw(struct igb_adapter *adapter) +{ + struct e1000_fw_drv_info fw_cmd; + struct e1000_hw *hw = &adapter->hw; + int i; + u16 mask; + + if (hw->mac.type == e1000_i210) + mask = E1000_SWFW_EEP_SM; + else + mask = E1000_SWFW_PHY0_SM; + /* i211 parts do not support this feature */ + if (hw->mac.type == e1000_i211) + hw->mac.arc_subsystem_valid = false; + + if (!hw->mac.ops.acquire_swfw_sync(hw, mask)) { + for (i = 0; i <= FW_MAX_RETRIES; i++) { + E1000_WRITE_REG(hw, E1000_FWSTS, E1000_FWSTS_FWRI); + fw_cmd.hdr.cmd = FW_CMD_DRV_INFO; + fw_cmd.hdr.buf_len = FW_CMD_DRV_INFO_LEN; + fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CMD_RESERVED; + fw_cmd.port_num = hw->bus.func; + fw_cmd.drv_version = FW_FAMILY_DRV_VER; + fw_cmd.hdr.checksum = 0; + fw_cmd.hdr.checksum = e1000_calculate_checksum((u8 *)&fw_cmd, + (FW_HDR_LEN + + fw_cmd.hdr.buf_len)); + e1000_host_interface_command(hw, (u8*)&fw_cmd, + sizeof(fw_cmd)); + if (fw_cmd.hdr.cmd_or_resp.ret_status == FW_STATUS_SUCCESS) + break; + } + } else + dev_warn(pci_dev_to_dev(adapter->pdev), + "Unable to get semaphore, firmware init failed.\n"); + hw->mac.ops.release_swfw_sync(hw, mask); +} + +static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) +{ + struct e1000_hw *hw = &adapter->hw; + u32 dmac_thr; + u16 hwm; + u32 status; + + if (hw->mac.type == e1000_i211) + return; + + if (hw->mac.type > e1000_82580) { + if (adapter->dmac != IGB_DMAC_DISABLE) { + u32 reg; + + /* force threshold to 0. */ + E1000_WRITE_REG(hw, E1000_DMCTXTH, 0); + + /* + * DMA Coalescing high water mark needs to be greater + * than the Rx threshold. Set hwm to PBA - max frame + * size in 16B units, capping it at PBA - 6KB. + */ + hwm = 64 * pba - adapter->max_frame_size / 16; + if (hwm < 64 * (pba - 6)) + hwm = 64 * (pba - 6); + reg = E1000_READ_REG(hw, E1000_FCRTC); + reg &= ~E1000_FCRTC_RTH_COAL_MASK; + reg |= ((hwm << E1000_FCRTC_RTH_COAL_SHIFT) + & E1000_FCRTC_RTH_COAL_MASK); + E1000_WRITE_REG(hw, E1000_FCRTC, reg); + + /* + * Set the DMA Coalescing Rx threshold to PBA - 2 * max + * frame size, capping it at PBA - 10KB. + */ + dmac_thr = pba - adapter->max_frame_size / 512; + if (dmac_thr < pba - 10) + dmac_thr = pba - 10; + reg = E1000_READ_REG(hw, E1000_DMACR); + reg &= ~E1000_DMACR_DMACTHR_MASK; + reg |= ((dmac_thr << E1000_DMACR_DMACTHR_SHIFT) + & E1000_DMACR_DMACTHR_MASK); + + /* transition to L0x or L1 if available..*/ + reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK); + + /* Check if status is 2.5Gb backplane connection + * before configuration of watchdog timer, which is + * in msec values in 12.8usec intervals + * watchdog timer= msec values in 32usec intervals + * for non 2.5Gb connection + */ + if (hw->mac.type == e1000_i354) { + status = E1000_READ_REG(hw, E1000_STATUS); + if ((status & E1000_STATUS_2P5_SKU) && + (!(status & E1000_STATUS_2P5_SKU_OVER))) + reg |= ((adapter->dmac * 5) >> 6); + else + reg |= ((adapter->dmac) >> 5); + } else { + reg |= ((adapter->dmac) >> 5); + } + + /* + * Disable BMC-to-OS Watchdog enable + * on devices that support OS-to-BMC + */ + if (hw->mac.type != e1000_i354) + reg &= ~E1000_DMACR_DC_BMC2OSW_EN; + E1000_WRITE_REG(hw, E1000_DMACR, reg); + + /* no lower threshold to disable coalescing(smart fifb)-UTRESH=0*/ + E1000_WRITE_REG(hw, E1000_DMCRTRH, 0); + + /* This sets the time to wait before requesting + * transition to low power state to number of usecs + * needed to receive 1 512 byte frame at gigabit + * line rate. On i350 device, time to make transition + * to Lx state is delayed by 4 usec with flush disable + * bit set to avoid losing mailbox interrupts + */ + reg = E1000_READ_REG(hw, E1000_DMCTLX); + if (hw->mac.type == e1000_i350) + reg |= IGB_DMCTLX_DCFLUSH_DIS; + + /* in 2.5Gb connection, TTLX unit is 0.4 usec + * which is 0x4*2 = 0xA. But delay is still 4 usec + */ + if (hw->mac.type == e1000_i354) { + status = E1000_READ_REG(hw, E1000_STATUS); + if ((status & E1000_STATUS_2P5_SKU) && + (!(status & E1000_STATUS_2P5_SKU_OVER))) + reg |= 0xA; + else + reg |= 0x4; + } else { + reg |= 0x4; + } + E1000_WRITE_REG(hw, E1000_DMCTLX, reg); + + /* free space in tx packet buffer to wake from DMA coal */ + E1000_WRITE_REG(hw, E1000_DMCTXTH, (IGB_MIN_TXPBSIZE - + (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6); + + /* make low power state decision controlled by DMA coal */ + reg = E1000_READ_REG(hw, E1000_PCIEMISC); + reg &= ~E1000_PCIEMISC_LX_DECISION; + E1000_WRITE_REG(hw, E1000_PCIEMISC, reg); + } /* endif adapter->dmac is not disabled */ + } else if (hw->mac.type == e1000_82580) { + u32 reg = E1000_READ_REG(hw, E1000_PCIEMISC); + E1000_WRITE_REG(hw, E1000_PCIEMISC, + reg & ~E1000_PCIEMISC_LX_DECISION); + E1000_WRITE_REG(hw, E1000_DMACR, 0); + } +} + +#ifdef HAVE_I2C_SUPPORT +/* igb_read_i2c_byte - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @dev_addr: device address + * @data: value read + * + * Performs byte read operation over I2C interface at + * a specified device address. + */ +s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); + struct i2c_client *this_client = adapter->i2c_client; + s32 status; + u16 swfw_mask = 0; + + if (!this_client) + return E1000_ERR_I2C; + + swfw_mask = E1000_SWFW_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) + != E1000_SUCCESS) + return E1000_ERR_SWFW_SYNC; + + status = i2c_smbus_read_byte_data(this_client, byte_offset); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + + if (status < 0) + return E1000_ERR_I2C; + else { + *data = status; + return E1000_SUCCESS; + } +} + +/* igb_write_i2c_byte - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: value to write + * + * Performs byte write operation over I2C interface at + * a specified device address. + */ +s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); + struct i2c_client *this_client = adapter->i2c_client; + s32 status; + u16 swfw_mask = E1000_SWFW_PHY0_SM; + + if (!this_client) + return E1000_ERR_I2C; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) + return E1000_ERR_SWFW_SYNC; + status = i2c_smbus_write_byte_data(this_client, byte_offset, data); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + + if (status) + return E1000_ERR_I2C; + else + return E1000_SUCCESS; +} +#endif /* HAVE_I2C_SUPPORT */ +/* igb_main.c */ + + +/** + * igb_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in igb_pci_tbl + * + * Returns 0 on success, negative on failure + * + * igb_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ +int igb_kni_probe(struct pci_dev *pdev, + struct net_device **lad_dev) +{ + struct net_device *netdev; + struct igb_adapter *adapter; + struct e1000_hw *hw; + u16 eeprom_data = 0; + u8 pba_str[E1000_PBANUM_LENGTH]; + s32 ret_val; + static int global_quad_port_a; /* global quad port a indication */ + int i, err, pci_using_dac = 0; + static int cards_found; + + err = pci_enable_device_mem(pdev); + if (err) + return err; + +#ifdef NO_KNI + pci_using_dac = 0; + err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); + if (!err) { + err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); + if (!err) + pci_using_dac = 1; + } else { + err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); + if (err) { + err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); + if (err) { + IGB_ERR("No usable DMA configuration, " + "aborting\n"); + goto err_dma; + } + } + } + +#ifndef HAVE_ASPM_QUIRKS + /* 82575 requires that the pci-e link partner disable the L0s state */ + switch (pdev->device) { + case E1000_DEV_ID_82575EB_COPPER: + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82575GB_QUAD_COPPER: + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); + default: + break; + } + +#endif /* HAVE_ASPM_QUIRKS */ + err = pci_request_selected_regions(pdev, + pci_select_bars(pdev, + IORESOURCE_MEM), + igb_driver_name); + if (err) + goto err_pci_reg; + + pci_enable_pcie_error_reporting(pdev); + + pci_set_master(pdev); + + err = -ENOMEM; +#endif /* NO_KNI */ +#ifdef HAVE_TX_MQ + netdev = alloc_etherdev_mq(sizeof(struct igb_adapter), + IGB_MAX_TX_QUEUES); +#else + netdev = alloc_etherdev(sizeof(struct igb_adapter)); +#endif /* HAVE_TX_MQ */ + if (!netdev) + goto err_alloc_etherdev; + + SET_MODULE_OWNER(netdev); + SET_NETDEV_DEV(netdev, &pdev->dev); + + //pci_set_drvdata(pdev, netdev); + adapter = netdev_priv(netdev); + adapter->netdev = netdev; + adapter->pdev = pdev; + hw = &adapter->hw; + hw->back = adapter; + adapter->port_num = hw->bus.func; + adapter->msg_enable = (1 << debug) - 1; + +#ifdef HAVE_PCI_ERS + err = pci_save_state(pdev); + if (err) + goto err_ioremap; +#endif + err = -EIO; + hw->hw_addr = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!hw->hw_addr) + goto err_ioremap; + +#ifdef HAVE_NET_DEVICE_OPS + netdev->netdev_ops = &igb_netdev_ops; +#else /* HAVE_NET_DEVICE_OPS */ + netdev->open = &igb_open; + netdev->stop = &igb_close; + netdev->get_stats = &igb_get_stats; +#ifdef HAVE_SET_RX_MODE + netdev->set_rx_mode = &igb_set_rx_mode; +#endif + netdev->set_multicast_list = &igb_set_rx_mode; + netdev->set_mac_address = &igb_set_mac; + netdev->change_mtu = &igb_change_mtu; + netdev->do_ioctl = &igb_ioctl; +#ifdef HAVE_TX_TIMEOUT + netdev->tx_timeout = &igb_tx_timeout; +#endif + netdev->vlan_rx_register = igb_vlan_mode; + netdev->vlan_rx_add_vid = igb_vlan_rx_add_vid; + netdev->vlan_rx_kill_vid = igb_vlan_rx_kill_vid; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = igb_netpoll; +#endif + netdev->hard_start_xmit = &igb_xmit_frame; +#endif /* HAVE_NET_DEVICE_OPS */ + igb_set_ethtool_ops(netdev); +#ifdef HAVE_TX_TIMEOUT + netdev->watchdog_timeo = 5 * HZ; +#endif + + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + + adapter->bd_number = cards_found; + + /* setup the private structure */ + err = igb_sw_init(adapter); + if (err) + goto err_sw_init; + + e1000_get_bus_info(hw); + + hw->phy.autoneg_wait_to_complete = FALSE; + hw->mac.adaptive_ifs = FALSE; + + /* Copper options */ + if (hw->phy.media_type == e1000_media_type_copper) { + hw->phy.mdix = AUTO_ALL_MODES; + hw->phy.disable_polarity_correction = FALSE; + hw->phy.ms_type = e1000_ms_hw_default; + } + + if (e1000_check_reset_block(hw)) + dev_info(pci_dev_to_dev(pdev), + "PHY reset is blocked due to SOL/IDER session.\n"); + + /* + * features is initialized to 0 in allocation, it might have bits + * set by igb_sw_init so we should use an or instead of an + * assignment. + */ + netdev->features |= NETIF_F_SG | + NETIF_F_IP_CSUM | +#ifdef NETIF_F_IPV6_CSUM + NETIF_F_IPV6_CSUM | +#endif +#ifdef NETIF_F_TSO + NETIF_F_TSO | +#ifdef NETIF_F_TSO6 + NETIF_F_TSO6 | +#endif +#endif /* NETIF_F_TSO */ +#ifdef NETIF_F_RXHASH + NETIF_F_RXHASH | +#endif + NETIF_F_RXCSUM | +#ifdef NETIF_F_HW_VLAN_CTAG_RX + NETIF_F_HW_VLAN_CTAG_RX | + NETIF_F_HW_VLAN_CTAG_TX; +#else + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_TX; +#endif + + if (hw->mac.type >= e1000_82576) + netdev->features |= NETIF_F_SCTP_CSUM; + +#ifdef HAVE_NDO_SET_FEATURES + /* copy netdev features into list of user selectable features */ + netdev->hw_features |= netdev->features; +#ifndef IGB_NO_LRO + + /* give us the option of enabling LRO later */ + netdev->hw_features |= NETIF_F_LRO; +#endif +#else +#ifdef NETIF_F_GRO + + /* this is only needed on kernels prior to 2.6.39 */ + netdev->features |= NETIF_F_GRO; +#endif +#endif + + /* set this bit last since it cannot be part of hw_features */ +#ifdef NETIF_F_HW_VLAN_CTAG_FILTER + netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; +#else + netdev->features |= NETIF_F_HW_VLAN_FILTER; +#endif + +#ifdef HAVE_NETDEV_VLAN_FEATURES + netdev->vlan_features |= NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | + NETIF_F_SG; + +#endif + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + +#ifdef NO_KNI + adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw); +#ifdef DEBUG + if (adapter->dmac != IGB_DMAC_DISABLE) + printk("%s: DMA Coalescing is enabled..\n", netdev->name); +#endif + + /* before reading the NVM, reset the controller to put the device in a + * known good starting state */ + e1000_reset_hw(hw); +#endif /* NO_KNI */ + + /* make sure the NVM is good */ + if (e1000_validate_nvm_checksum(hw) < 0) { + dev_err(pci_dev_to_dev(pdev), "The NVM Checksum Is Not" + " Valid\n"); + err = -EIO; + goto err_eeprom; + } + + /* copy the MAC address out of the NVM */ + if (e1000_read_mac_addr(hw)) + dev_err(pci_dev_to_dev(pdev), "NVM Read Error\n"); + memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); +#ifdef ETHTOOL_GPERMADDR + memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); + + if (!is_valid_ether_addr(netdev->perm_addr)) { +#else + if (!is_valid_ether_addr(netdev->dev_addr)) { +#endif + dev_err(pci_dev_to_dev(pdev), "Invalid MAC Address\n"); + err = -EIO; + goto err_eeprom; + } + + memcpy(&adapter->mac_table[0].addr, hw->mac.addr, netdev->addr_len); + adapter->mac_table[0].queue = adapter->vfs_allocated_count; + adapter->mac_table[0].state = (IGB_MAC_STATE_DEFAULT | IGB_MAC_STATE_IN_USE); + igb_rar_set(adapter, 0); + + /* get firmware version for ethtool -i */ + igb_set_fw_version(adapter); + + /* Check if Media Autosense is enabled */ + if (hw->mac.type == e1000_82580) + igb_init_mas(adapter); + +#ifdef NO_KNI +#ifdef HAVE_TIMER_SETUP + timer_setup(&adapter->watchdog_timer, &igb_watchdog, 0); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + timer_setup(&adapter->dma_err_timer, &igb_dma_err_timer, 0); + timer_setup(&adapter->phy_info_timer, &igb_update_phy_info, 0); +#else + setup_timer(&adapter->watchdog_timer, &igb_watchdog, + (unsigned long) adapter); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + setup_timer(&adapter->dma_err_timer, &igb_dma_err_timer, + (unsigned long) adapter); + setup_timer(&adapter->phy_info_timer, &igb_update_phy_info, + (unsigned long) adapter); +#endif + + INIT_WORK(&adapter->reset_task, igb_reset_task); + INIT_WORK(&adapter->watchdog_task, igb_watchdog_task); + if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) + INIT_WORK(&adapter->dma_err_task, igb_dma_err_task); +#endif + + /* Initialize link properties that are user-changeable */ + adapter->fc_autoneg = true; + hw->mac.autoneg = true; + hw->phy.autoneg_advertised = 0x2f; + + hw->fc.requested_mode = e1000_fc_default; + hw->fc.current_mode = e1000_fc_default; + + e1000_validate_mdi_setting(hw); + + /* By default, support wake on port A */ + if (hw->bus.func == 0) + adapter->flags |= IGB_FLAG_WOL_SUPPORTED; + + /* Check the NVM for wake support for non-port A ports */ + if (hw->mac.type >= e1000_82580) + hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + + NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, + &eeprom_data); + else if (hw->bus.func == 1) + e1000_read_nvm(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); + + if (eeprom_data & IGB_EEPROM_APME) + adapter->flags |= IGB_FLAG_WOL_SUPPORTED; + + /* now that we have the eeprom settings, apply the special cases where + * the eeprom may be wrong or the board simply won't support wake on + * lan on a particular port */ + switch (pdev->device) { + case E1000_DEV_ID_82575GB_QUAD_COPPER: + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + break; + case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: + /* Wake events only supported on port A for dual fiber + * regardless of eeprom setting */ + if (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_FUNC_1) + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + break; + case E1000_DEV_ID_82576_QUAD_COPPER: + case E1000_DEV_ID_82576_QUAD_COPPER_ET2: + /* if quad port adapter, disable WoL on all but port A */ + if (global_quad_port_a != 0) + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + else + adapter->flags |= IGB_FLAG_QUAD_PORT_A; + /* Reset for multiple quad port adapters */ + if (++global_quad_port_a == 4) + global_quad_port_a = 0; + break; + default: + /* If the device can't wake, don't set software support */ + if (!device_can_wakeup(&adapter->pdev->dev)) + adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; + break; + } + + /* initialize the wol settings based on the eeprom settings */ + if (adapter->flags & IGB_FLAG_WOL_SUPPORTED) + adapter->wol |= E1000_WUFC_MAG; + + /* Some vendors want WoL disabled by default, but still supported */ + if ((hw->mac.type == e1000_i350) && + (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) { + adapter->flags |= IGB_FLAG_WOL_SUPPORTED; + adapter->wol = 0; + } + +#ifdef NO_KNI + device_set_wakeup_enable(pci_dev_to_dev(adapter->pdev), + adapter->flags & IGB_FLAG_WOL_SUPPORTED); + + /* reset the hardware with the new settings */ + igb_reset(adapter); + adapter->devrc = 0; + +#ifdef HAVE_I2C_SUPPORT + /* Init the I2C interface */ + err = igb_init_i2c(adapter); + if (err) { + dev_err(&pdev->dev, "failed to init i2c interface\n"); + goto err_eeprom; + } +#endif /* HAVE_I2C_SUPPORT */ + + /* let the f/w know that the h/w is now under the control of the + * driver. */ + igb_get_hw_control(adapter); + + strncpy(netdev->name, "eth%d", IFNAMSIZ); + err = register_netdev(netdev); + if (err) + goto err_register; + +#ifdef CONFIG_IGB_VMDQ_NETDEV + err = igb_init_vmdq_netdevs(adapter); + if (err) + goto err_register; +#endif + /* carrier off reporting is important to ethtool even BEFORE open */ + netif_carrier_off(netdev); + +#ifdef IGB_DCA + if (dca_add_requester(&pdev->dev) == E1000_SUCCESS) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; + dev_info(pci_dev_to_dev(pdev), "DCA enabled\n"); + igb_setup_dca(adapter); + } + +#endif +#ifdef HAVE_PTP_1588_CLOCK + /* do hw tstamp init after resetting */ + igb_ptp_init(adapter); +#endif /* HAVE_PTP_1588_CLOCK */ + +#endif /* NO_KNI */ + dev_info(pci_dev_to_dev(pdev), "Intel(R) Gigabit Ethernet Network Connection\n"); + /* print bus type/speed/width info */ + dev_info(pci_dev_to_dev(pdev), "%s: (PCIe:%s:%s) ", + netdev->name, + ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5GT/s" : + (hw->bus.speed == e1000_bus_speed_5000) ? "5.0GT/s" : + (hw->mac.type == e1000_i354) ? "integrated" : + "unknown"), + ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : + (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" : + (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" : + (hw->mac.type == e1000_i354) ? "integrated" : + "unknown")); + dev_info(pci_dev_to_dev(pdev), "%s: MAC: ", netdev->name); + for (i = 0; i < 6; i++) + printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':'); + + ret_val = e1000_read_pba_string(hw, pba_str, E1000_PBANUM_LENGTH); + if (ret_val) + strncpy(pba_str, "Unknown", sizeof(pba_str) - 1); + dev_info(pci_dev_to_dev(pdev), "%s: PBA No: %s\n", netdev->name, + pba_str); + + + /* Initialize the thermal sensor on i350 devices. */ + if (hw->mac.type == e1000_i350) { + if (hw->bus.func == 0) { + u16 ets_word; + + /* + * Read the NVM to determine if this i350 device + * supports an external thermal sensor. + */ + e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_word); + if (ets_word != 0x0000 && ets_word != 0xFFFF) + adapter->ets = true; + else + adapter->ets = false; + } +#ifdef NO_KNI +#ifdef IGB_HWMON + + igb_sysfs_init(adapter); +#else +#ifdef IGB_PROCFS + + igb_procfs_init(adapter); +#endif /* IGB_PROCFS */ +#endif /* IGB_HWMON */ +#endif /* NO_KNI */ + } else { + adapter->ets = false; + } + + if (hw->phy.media_type == e1000_media_type_copper) { + switch (hw->mac.type) { + case e1000_i350: + case e1000_i210: + case e1000_i211: + /* Enable EEE for internal copper PHY devices */ + err = e1000_set_eee_i350(hw); + if ((!err) && + (adapter->flags & IGB_FLAG_EEE)) + adapter->eee_advert = + MDIO_EEE_100TX | MDIO_EEE_1000T; + break; + case e1000_i354: + if ((E1000_READ_REG(hw, E1000_CTRL_EXT)) & + (E1000_CTRL_EXT_LINK_MODE_SGMII)) { + err = e1000_set_eee_i354(hw); + if ((!err) && + (adapter->flags & IGB_FLAG_EEE)) + adapter->eee_advert = + MDIO_EEE_100TX | MDIO_EEE_1000T; + } + break; + default: + break; + } + } + + /* send driver version info to firmware */ + if (hw->mac.type >= e1000_i350) + igb_init_fw(adapter); + +#ifndef IGB_NO_LRO + if (netdev->features & NETIF_F_LRO) + dev_info(pci_dev_to_dev(pdev), "Internal LRO is enabled \n"); + else + dev_info(pci_dev_to_dev(pdev), "LRO is disabled \n"); +#endif + dev_info(pci_dev_to_dev(pdev), + "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n", + adapter->msix_entries ? "MSI-X" : + (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy", + adapter->num_rx_queues, adapter->num_tx_queues); + + cards_found++; + *lad_dev = netdev; + + pm_runtime_put_noidle(&pdev->dev); + return 0; + +//err_register: +// igb_release_hw_control(adapter); +#ifdef HAVE_I2C_SUPPORT + memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap)); +#endif /* HAVE_I2C_SUPPORT */ +err_eeprom: +// if (!e1000_check_reset_block(hw)) +// e1000_phy_hw_reset(hw); + + if (hw->flash_address) + iounmap(hw->flash_address); +err_sw_init: +// igb_clear_interrupt_scheme(adapter); +// igb_reset_sriov_capability(adapter); + iounmap(hw->hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: +// pci_release_selected_regions(pdev, +// pci_select_bars(pdev, IORESOURCE_MEM)); +//err_pci_reg: +//err_dma: + pci_disable_device(pdev); + return err; +} + + +void igb_kni_remove(struct pci_dev *pdev) +{ + pci_disable_device(pdev); +} diff --git a/kernel/linux/kni/ethtool/igb/igb_param.c b/kernel/linux/kni/ethtool/igb/igb_param.c new file mode 100644 index 00000000..98209a10 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb_param.c @@ -0,0 +1,832 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + + +#include <linux/netdevice.h> + +#include "igb.h" + +/* This is the only thing that needs to be changed to adjust the + * maximum number of ports that the driver can manage. + */ + +#define IGB_MAX_NIC 32 + +#define OPTION_UNSET -1 +#define OPTION_DISABLED 0 +#define OPTION_ENABLED 1 +#define MAX_NUM_LIST_OPTS 15 + +/* All parameters are treated the same, as an integer array of values. + * This macro just reduces the need to repeat the same declaration code + * over and over (plus this helps to avoid typo bugs). + */ + +#define IGB_PARAM_INIT { [0 ... IGB_MAX_NIC] = OPTION_UNSET } +#ifndef module_param_array +/* Module Parameters are always initialized to -1, so that the driver + * can tell the difference between no user specified value or the + * user asking for the default value. + * The true default values are loaded in when igb_check_options is called. + * + * This is a GCC extension to ANSI C. + * See the item "Labeled Elements in Initializers" in the section + * "Extensions to the C Language Family" of the GCC documentation. + */ + +#define IGB_PARAM(X, desc) \ + static const int X[IGB_MAX_NIC+1] = IGB_PARAM_INIT; \ + MODULE_PARM(X, "1-" __MODULE_STRING(IGB_MAX_NIC) "i"); \ + MODULE_PARM_DESC(X, desc); +#else +#define IGB_PARAM(X, desc) \ + static int X[IGB_MAX_NIC+1] = IGB_PARAM_INIT; \ + static unsigned int num_##X; \ + module_param_array_named(X, X, int, &num_##X, 0); \ + MODULE_PARM_DESC(X, desc); +#endif + +/* Interrupt Throttle Rate (interrupts/sec) + * + * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) + */ +IGB_PARAM(InterruptThrottleRate, + "Maximum interrupts per second, per vector, (max 100000), default 3=adaptive"); +#define DEFAULT_ITR 3 +#define MAX_ITR 100000 +/* #define MIN_ITR 120 */ +#define MIN_ITR 0 +/* IntMode (Interrupt Mode) + * + * Valid Range: 0 - 2 + * + * Default Value: 2 (MSI-X) + */ +IGB_PARAM(IntMode, "Change Interrupt Mode (0=Legacy, 1=MSI, 2=MSI-X), default 2"); +#define MAX_INTMODE IGB_INT_MODE_MSIX +#define MIN_INTMODE IGB_INT_MODE_LEGACY + +IGB_PARAM(Node, "set the starting node to allocate memory on, default -1"); + +/* LLIPort (Low Latency Interrupt TCP Port) + * + * Valid Range: 0 - 65535 + * + * Default Value: 0 (disabled) + */ +IGB_PARAM(LLIPort, "Low Latency Interrupt TCP Port (0-65535), default 0=off"); + +#define DEFAULT_LLIPORT 0 +#define MAX_LLIPORT 0xFFFF +#define MIN_LLIPORT 0 + +/* LLIPush (Low Latency Interrupt on TCP Push flag) + * + * Valid Range: 0, 1 + * + * Default Value: 0 (disabled) + */ +IGB_PARAM(LLIPush, "Low Latency Interrupt on TCP Push flag (0,1), default 0=off"); + +#define DEFAULT_LLIPUSH 0 +#define MAX_LLIPUSH 1 +#define MIN_LLIPUSH 0 + +/* LLISize (Low Latency Interrupt on Packet Size) + * + * Valid Range: 0 - 1500 + * + * Default Value: 0 (disabled) + */ +IGB_PARAM(LLISize, "Low Latency Interrupt on Packet Size (0-1500), default 0=off"); + +#define DEFAULT_LLISIZE 0 +#define MAX_LLISIZE 1500 +#define MIN_LLISIZE 0 + +/* RSS (Enable RSS multiqueue receive) + * + * Valid Range: 0 - 8 + * + * Default Value: 1 + */ +IGB_PARAM(RSS, "Number of Receive-Side Scaling Descriptor Queues (0-8), default 1, 0=number of cpus"); + +#define DEFAULT_RSS 1 +#define MAX_RSS 8 +#define MIN_RSS 0 + +/* VMDQ (Enable VMDq multiqueue receive) + * + * Valid Range: 0 - 8 + * + * Default Value: 0 + */ +IGB_PARAM(VMDQ, "Number of Virtual Machine Device Queues: 0-1 = disable, 2-8 enable, default 0"); + +#define DEFAULT_VMDQ 0 +#define MAX_VMDQ MAX_RSS +#define MIN_VMDQ 0 + +/* max_vfs (Enable SR-IOV VF devices) + * + * Valid Range: 0 - 7 + * + * Default Value: 0 + */ +IGB_PARAM(max_vfs, "Number of Virtual Functions: 0 = disable, 1-7 enable, default 0"); + +#define DEFAULT_SRIOV 0 +#define MAX_SRIOV 7 +#define MIN_SRIOV 0 + +/* MDD (Enable Malicious Driver Detection) + * + * Only available when SR-IOV is enabled - max_vfs is greater than 0 + * + * Valid Range: 0, 1 + * + * Default Value: 1 + */ +IGB_PARAM(MDD, "Malicious Driver Detection (0/1), default 1 = enabled. " + "Only available when max_vfs is greater than 0"); + +#ifdef DEBUG + +/* Disable Hardware Reset on Tx Hang + * + * Valid Range: 0, 1 + * + * Default Value: 0 (disabled, i.e. h/w will reset) + */ +IGB_PARAM(DisableHwReset, "Disable reset of hardware on Tx hang"); + +/* Dump Transmit and Receive buffers + * + * Valid Range: 0, 1 + * + * Default Value: 0 + */ +IGB_PARAM(DumpBuffers, "Dump Tx/Rx buffers on Tx hang or by request"); + +#endif /* DEBUG */ + +/* QueuePairs (Enable TX/RX queue pairs for interrupt handling) + * + * Valid Range: 0 - 1 + * + * Default Value: 1 + */ +IGB_PARAM(QueuePairs, "Enable Tx/Rx queue pairs for interrupt handling (0,1), default 1=on"); + +#define DEFAULT_QUEUE_PAIRS 1 +#define MAX_QUEUE_PAIRS 1 +#define MIN_QUEUE_PAIRS 0 + +/* Enable/disable EEE (a.k.a. IEEE802.3az) + * + * Valid Range: 0, 1 + * + * Default Value: 1 + */ + IGB_PARAM(EEE, "Enable/disable on parts that support the feature"); + +/* Enable/disable DMA Coalescing + * + * Valid Values: 0(off), 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, + * 9000, 10000(msec), 250(usec), 500(usec) + * + * Default Value: 0 + */ + IGB_PARAM(DMAC, "Disable or set latency for DMA Coalescing ((0=off, 1000-10000(msec), 250, 500 (usec))"); + +#ifndef IGB_NO_LRO +/* Enable/disable Large Receive Offload + * + * Valid Values: 0(off), 1(on) + * + * Default Value: 0 + */ + IGB_PARAM(LRO, "Large Receive Offload (0,1), default 0=off"); + +#endif +struct igb_opt_list { + int i; + char *str; +}; +struct igb_option { + enum { enable_option, range_option, list_option } type; + const char *name; + const char *err; + int def; + union { + struct { /* range_option info */ + int min; + int max; + } r; + struct { /* list_option info */ + int nr; + struct igb_opt_list *p; + } l; + } arg; +}; + +static int igb_validate_option(unsigned int *value, + struct igb_option *opt, + struct igb_adapter *adapter) +{ + if (*value == OPTION_UNSET) { + *value = opt->def; + return 0; + } + + switch (opt->type) { + case enable_option: + switch (*value) { + case OPTION_ENABLED: + DPRINTK(PROBE, INFO, "%s Enabled\n", opt->name); + return 0; + case OPTION_DISABLED: + DPRINTK(PROBE, INFO, "%s Disabled\n", opt->name); + return 0; + } + break; + case range_option: + if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { + DPRINTK(PROBE, INFO, + "%s set to %d\n", opt->name, *value); + return 0; + } + break; + case list_option: { + int i; + struct igb_opt_list *ent; + + for (i = 0; i < opt->arg.l.nr; i++) { + ent = &opt->arg.l.p[i]; + if (*value == ent->i) { + if (ent->str[0] != '\0') + DPRINTK(PROBE, INFO, "%s\n", ent->str); + return 0; + } + } + } + break; + default: + BUG(); + } + + DPRINTK(PROBE, INFO, "Invalid %s value specified (%d) %s\n", + opt->name, *value, opt->err); + *value = opt->def; + return -1; +} + +/** + * igb_check_options - Range Checking for Command Line Parameters + * @adapter: board private structure + * + * This routine checks all command line parameters for valid user + * input. If an invalid value is given, or if no user specified + * value exists, a default value is used. The final value is stored + * in a variable in the adapter structure. + **/ + +void igb_check_options(struct igb_adapter *adapter) +{ + int bd = adapter->bd_number; + struct e1000_hw *hw = &adapter->hw; + + if (bd >= IGB_MAX_NIC) { + DPRINTK(PROBE, NOTICE, + "Warning: no configuration for board #%d\n", bd); + DPRINTK(PROBE, NOTICE, "Using defaults for all values\n"); +#ifndef module_param_array + bd = IGB_MAX_NIC; +#endif + } + + { /* Interrupt Throttling Rate */ + struct igb_option opt = { + .type = range_option, + .name = "Interrupt Throttling Rate (ints/sec)", + .err = "using default of " __MODULE_STRING(DEFAULT_ITR), + .def = DEFAULT_ITR, + .arg = { .r = { .min = MIN_ITR, + .max = MAX_ITR } } + }; + +#ifdef module_param_array + if (num_InterruptThrottleRate > bd) { +#endif + unsigned int itr = InterruptThrottleRate[bd]; + + switch (itr) { + case 0: + DPRINTK(PROBE, INFO, "%s turned off\n", + opt.name); + if (hw->mac.type >= e1000_i350) + adapter->dmac = IGB_DMAC_DISABLE; + adapter->rx_itr_setting = itr; + break; + case 1: + DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", + opt.name); + adapter->rx_itr_setting = itr; + break; + case 3: + DPRINTK(PROBE, INFO, + "%s set to dynamic conservative mode\n", + opt.name); + adapter->rx_itr_setting = itr; + break; + default: + igb_validate_option(&itr, &opt, adapter); + /* Save the setting, because the dynamic bits + * change itr. In case of invalid user value, + * default to conservative mode, else need to + * clear the lower two bits because they are + * used as control */ + if (itr == 3) { + adapter->rx_itr_setting = itr; + } else { + adapter->rx_itr_setting = 1000000000 / + (itr * 256); + adapter->rx_itr_setting &= ~3; + } + break; + } +#ifdef module_param_array + } else { + adapter->rx_itr_setting = opt.def; + } +#endif + adapter->tx_itr_setting = adapter->rx_itr_setting; + } + { /* Interrupt Mode */ + struct igb_option opt = { + .type = range_option, + .name = "Interrupt Mode", + .err = "defaulting to 2 (MSI-X)", + .def = IGB_INT_MODE_MSIX, + .arg = { .r = { .min = MIN_INTMODE, + .max = MAX_INTMODE } } + }; + +#ifdef module_param_array + if (num_IntMode > bd) { +#endif + unsigned int int_mode = IntMode[bd]; + igb_validate_option(&int_mode, &opt, adapter); + adapter->int_mode = int_mode; +#ifdef module_param_array + } else { + adapter->int_mode = opt.def; + } +#endif + } + { /* Low Latency Interrupt TCP Port */ + struct igb_option opt = { + .type = range_option, + .name = "Low Latency Interrupt TCP Port", + .err = "using default of " __MODULE_STRING(DEFAULT_LLIPORT), + .def = DEFAULT_LLIPORT, + .arg = { .r = { .min = MIN_LLIPORT, + .max = MAX_LLIPORT } } + }; + +#ifdef module_param_array + if (num_LLIPort > bd) { +#endif + adapter->lli_port = LLIPort[bd]; + if (adapter->lli_port) { + igb_validate_option(&adapter->lli_port, &opt, + adapter); + } else { + DPRINTK(PROBE, INFO, "%s turned off\n", + opt.name); + } +#ifdef module_param_array + } else { + adapter->lli_port = opt.def; + } +#endif + } + { /* Low Latency Interrupt on Packet Size */ + struct igb_option opt = { + .type = range_option, + .name = "Low Latency Interrupt on Packet Size", + .err = "using default of " __MODULE_STRING(DEFAULT_LLISIZE), + .def = DEFAULT_LLISIZE, + .arg = { .r = { .min = MIN_LLISIZE, + .max = MAX_LLISIZE } } + }; + +#ifdef module_param_array + if (num_LLISize > bd) { +#endif + adapter->lli_size = LLISize[bd]; + if (adapter->lli_size) { + igb_validate_option(&adapter->lli_size, &opt, + adapter); + } else { + DPRINTK(PROBE, INFO, "%s turned off\n", + opt.name); + } +#ifdef module_param_array + } else { + adapter->lli_size = opt.def; + } +#endif + } + { /* Low Latency Interrupt on TCP Push flag */ + struct igb_option opt = { + .type = enable_option, + .name = "Low Latency Interrupt on TCP Push flag", + .err = "defaulting to Disabled", + .def = OPTION_DISABLED + }; + +#ifdef module_param_array + if (num_LLIPush > bd) { +#endif + unsigned int lli_push = LLIPush[bd]; + igb_validate_option(&lli_push, &opt, adapter); + adapter->flags |= lli_push ? IGB_FLAG_LLI_PUSH : 0; +#ifdef module_param_array + } else { + adapter->flags |= opt.def ? IGB_FLAG_LLI_PUSH : 0; + } +#endif + } + { /* SRIOV - Enable SR-IOV VF devices */ + struct igb_option opt = { + .type = range_option, + .name = "max_vfs - SR-IOV VF devices", + .err = "using default of " __MODULE_STRING(DEFAULT_SRIOV), + .def = DEFAULT_SRIOV, + .arg = { .r = { .min = MIN_SRIOV, + .max = MAX_SRIOV } } + }; + +#ifdef module_param_array + if (num_max_vfs > bd) { +#endif + adapter->vfs_allocated_count = max_vfs[bd]; + igb_validate_option(&adapter->vfs_allocated_count, &opt, adapter); + +#ifdef module_param_array + } else { + adapter->vfs_allocated_count = opt.def; + } +#endif + if (adapter->vfs_allocated_count) { + switch (hw->mac.type) { + case e1000_82575: + case e1000_82580: + case e1000_i210: + case e1000_i211: + case e1000_i354: + adapter->vfs_allocated_count = 0; + DPRINTK(PROBE, INFO, "SR-IOV option max_vfs not supported.\n"); + default: + break; + } + } + } + { /* VMDQ - Enable VMDq multiqueue receive */ + struct igb_option opt = { + .type = range_option, + .name = "VMDQ - VMDq multiqueue queue count", + .err = "using default of " __MODULE_STRING(DEFAULT_VMDQ), + .def = DEFAULT_VMDQ, + .arg = { .r = { .min = MIN_VMDQ, + .max = (MAX_VMDQ - adapter->vfs_allocated_count) } } + }; + if ((hw->mac.type != e1000_i210) || + (hw->mac.type != e1000_i211)) { +#ifdef module_param_array + if (num_VMDQ > bd) { +#endif + adapter->vmdq_pools = (VMDQ[bd] == 1 ? 0 : VMDQ[bd]); + if (adapter->vfs_allocated_count && !adapter->vmdq_pools) { + DPRINTK(PROBE, INFO, "Enabling SR-IOV requires VMDq be set to at least 1\n"); + adapter->vmdq_pools = 1; + } + igb_validate_option(&adapter->vmdq_pools, &opt, adapter); + +#ifdef module_param_array + } else { + if (!adapter->vfs_allocated_count) + adapter->vmdq_pools = (opt.def == 1 ? 0 : opt.def); + else + adapter->vmdq_pools = 1; + } +#endif +#ifdef CONFIG_IGB_VMDQ_NETDEV + if (hw->mac.type == e1000_82575 && adapter->vmdq_pools) { + DPRINTK(PROBE, INFO, "VMDq not supported on this part.\n"); + adapter->vmdq_pools = 0; + } +#endif + + } else { + DPRINTK(PROBE, INFO, "VMDq option is not supported.\n"); + adapter->vmdq_pools = opt.def; + } + } + { /* RSS - Enable RSS multiqueue receives */ + struct igb_option opt = { + .type = range_option, + .name = "RSS - RSS multiqueue receive count", + .err = "using default of " __MODULE_STRING(DEFAULT_RSS), + .def = DEFAULT_RSS, + .arg = { .r = { .min = MIN_RSS, + .max = MAX_RSS } } + }; + + switch (hw->mac.type) { + case e1000_82575: +#ifndef CONFIG_IGB_VMDQ_NETDEV + if (!!adapter->vmdq_pools) { + if (adapter->vmdq_pools <= 2) { + if (adapter->vmdq_pools == 2) + opt.arg.r.max = 3; + } else { + opt.arg.r.max = 1; + } + } else { + opt.arg.r.max = 4; + } +#else + opt.arg.r.max = !!adapter->vmdq_pools ? 1 : 4; +#endif /* CONFIG_IGB_VMDQ_NETDEV */ + break; + case e1000_i210: + opt.arg.r.max = 4; + break; + case e1000_i211: + opt.arg.r.max = 2; + break; + case e1000_82576: +#ifndef CONFIG_IGB_VMDQ_NETDEV + if (!!adapter->vmdq_pools) + opt.arg.r.max = 2; + break; +#endif /* CONFIG_IGB_VMDQ_NETDEV */ + case e1000_82580: + case e1000_i350: + case e1000_i354: + default: + if (!!adapter->vmdq_pools) + opt.arg.r.max = 1; + break; + } + + if (adapter->int_mode != IGB_INT_MODE_MSIX) { + DPRINTK(PROBE, INFO, "RSS is not supported when in MSI/Legacy Interrupt mode, %s\n", + opt.err); + opt.arg.r.max = 1; + } + +#ifdef module_param_array + if (num_RSS > bd) { +#endif + adapter->rss_queues = RSS[bd]; + switch (adapter->rss_queues) { + case 1: + break; + default: + igb_validate_option(&adapter->rss_queues, &opt, adapter); + if (adapter->rss_queues) + break; + case 0: + adapter->rss_queues = min_t(u32, opt.arg.r.max, num_online_cpus()); + break; + } +#ifdef module_param_array + } else { + adapter->rss_queues = opt.def; + } +#endif + } + { /* QueuePairs - Enable Tx/Rx queue pairs for interrupt handling */ + struct igb_option opt = { + .type = enable_option, + .name = "QueuePairs - Tx/Rx queue pairs for interrupt handling", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; +#ifdef module_param_array + if (num_QueuePairs > bd) { +#endif + unsigned int qp = QueuePairs[bd]; + /* + * We must enable queue pairs if the number of queues + * exceeds the number of available interrupts. We are + * limited to 10, or 3 per unallocated vf. On I210 and + * I211 devices, we are limited to 5 interrupts. + * However, since I211 only supports 2 queues, we do not + * need to check and override the user option. + */ + if (qp == OPTION_DISABLED) { + if (adapter->rss_queues > 4) + qp = OPTION_ENABLED; + + if (adapter->vmdq_pools > 4) + qp = OPTION_ENABLED; + + if (adapter->rss_queues > 1 && + (adapter->vmdq_pools > 3 || + adapter->vfs_allocated_count > 6)) + qp = OPTION_ENABLED; + + if (hw->mac.type == e1000_i210 && + adapter->rss_queues > 2) + qp = OPTION_ENABLED; + + if (qp == OPTION_ENABLED) + DPRINTK(PROBE, INFO, "Number of queues exceeds available interrupts, %s\n", + opt.err); + } + igb_validate_option(&qp, &opt, adapter); + adapter->flags |= qp ? IGB_FLAG_QUEUE_PAIRS : 0; +#ifdef module_param_array + } else { + adapter->flags |= opt.def ? IGB_FLAG_QUEUE_PAIRS : 0; + } +#endif + } + { /* EEE - Enable EEE for capable adapters */ + + if (hw->mac.type >= e1000_i350) { + struct igb_option opt = { + .type = enable_option, + .name = "EEE Support", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; +#ifdef module_param_array + if (num_EEE > bd) { +#endif + unsigned int eee = EEE[bd]; + igb_validate_option(&eee, &opt, adapter); + adapter->flags |= eee ? IGB_FLAG_EEE : 0; + if (eee) + hw->dev_spec._82575.eee_disable = false; + else + hw->dev_spec._82575.eee_disable = true; + +#ifdef module_param_array + } else { + adapter->flags |= opt.def ? IGB_FLAG_EEE : 0; + if (adapter->flags & IGB_FLAG_EEE) + hw->dev_spec._82575.eee_disable = false; + else + hw->dev_spec._82575.eee_disable = true; + } +#endif + } + } + { /* DMAC - Enable DMA Coalescing for capable adapters */ + + if (hw->mac.type >= e1000_i350) { + struct igb_opt_list list [] = { + { IGB_DMAC_DISABLE, "DMAC Disable"}, + { IGB_DMAC_MIN, "DMAC 250 usec"}, + { IGB_DMAC_500, "DMAC 500 usec"}, + { IGB_DMAC_EN_DEFAULT, "DMAC 1000 usec"}, + { IGB_DMAC_2000, "DMAC 2000 usec"}, + { IGB_DMAC_3000, "DMAC 3000 usec"}, + { IGB_DMAC_4000, "DMAC 4000 usec"}, + { IGB_DMAC_5000, "DMAC 5000 usec"}, + { IGB_DMAC_6000, "DMAC 6000 usec"}, + { IGB_DMAC_7000, "DMAC 7000 usec"}, + { IGB_DMAC_8000, "DMAC 8000 usec"}, + { IGB_DMAC_9000, "DMAC 9000 usec"}, + { IGB_DMAC_MAX, "DMAC 10000 usec"} + }; + struct igb_option opt = { + .type = list_option, + .name = "DMA Coalescing", + .err = "using default of "__MODULE_STRING(IGB_DMAC_DISABLE), + .def = IGB_DMAC_DISABLE, + .arg = { .l = { .nr = 13, + .p = list + } + } + }; +#ifdef module_param_array + if (num_DMAC > bd) { +#endif + unsigned int dmac = DMAC[bd]; + if (adapter->rx_itr_setting == IGB_DMAC_DISABLE) + dmac = IGB_DMAC_DISABLE; + igb_validate_option(&dmac, &opt, adapter); + switch (dmac) { + case IGB_DMAC_DISABLE: + adapter->dmac = dmac; + break; + case IGB_DMAC_MIN: + adapter->dmac = dmac; + break; + case IGB_DMAC_500: + adapter->dmac = dmac; + break; + case IGB_DMAC_EN_DEFAULT: + adapter->dmac = dmac; + break; + case IGB_DMAC_2000: + adapter->dmac = dmac; + break; + case IGB_DMAC_3000: + adapter->dmac = dmac; + break; + case IGB_DMAC_4000: + adapter->dmac = dmac; + break; + case IGB_DMAC_5000: + adapter->dmac = dmac; + break; + case IGB_DMAC_6000: + adapter->dmac = dmac; + break; + case IGB_DMAC_7000: + adapter->dmac = dmac; + break; + case IGB_DMAC_8000: + adapter->dmac = dmac; + break; + case IGB_DMAC_9000: + adapter->dmac = dmac; + break; + case IGB_DMAC_MAX: + adapter->dmac = dmac; + break; + default: + adapter->dmac = opt.def; + DPRINTK(PROBE, INFO, + "Invalid DMAC setting, " + "resetting DMAC to %d\n", opt.def); + } +#ifdef module_param_array + } else + adapter->dmac = opt.def; +#endif + } + } +#ifndef IGB_NO_LRO + { /* LRO - Enable Large Receive Offload */ + struct igb_option opt = { + .type = enable_option, + .name = "LRO - Large Receive Offload", + .err = "defaulting to Disabled", + .def = OPTION_DISABLED + }; + struct net_device *netdev = adapter->netdev; +#ifdef module_param_array + if (num_LRO > bd) { +#endif + unsigned int lro = LRO[bd]; + igb_validate_option(&lro, &opt, adapter); + netdev->features |= lro ? NETIF_F_LRO : 0; +#ifdef module_param_array + } else if (opt.def == OPTION_ENABLED) { + netdev->features |= NETIF_F_LRO; + } +#endif + } +#endif /* IGB_NO_LRO */ + { /* MDD - Enable Malicious Driver Detection. Only available when + SR-IOV is enabled. */ + struct igb_option opt = { + .type = enable_option, + .name = "Malicious Driver Detection", + .err = "defaulting to 1", + .def = OPTION_ENABLED, + .arg = { .r = { .min = OPTION_DISABLED, + .max = OPTION_ENABLED } } + }; + +#ifdef module_param_array + if (num_MDD > bd) { +#endif + adapter->mdd = MDD[bd]; + igb_validate_option((uint *)&adapter->mdd, &opt, + adapter); +#ifdef module_param_array + } else { + adapter->mdd = opt.def; + } +#endif + } +} diff --git a/kernel/linux/kni/ethtool/igb/igb_regtest.h b/kernel/linux/kni/ethtool/igb/igb_regtest.h new file mode 100644 index 00000000..ec2b86a0 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb_regtest.h @@ -0,0 +1,234 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ethtool register test data */ +struct igb_reg_test { + u16 reg; + u16 reg_offset; + u16 array_len; + u16 test_type; + u32 mask; + u32 write; +}; + +/* In the hardware, registers are laid out either singly, in arrays + * spaced 0x100 bytes apart, or in contiguous tables. We assume + * most tests take place on arrays or single registers (handled + * as a single-element array) and special-case the tables. + * Table tests are always pattern tests. + * + * We also make provision for some required setup steps by specifying + * registers to be written without any read-back testing. + */ + +#define PATTERN_TEST 1 +#define SET_READ_TEST 2 +#define WRITE_NO_TEST 3 +#define TABLE32_TEST 4 +#define TABLE64_TEST_LO 5 +#define TABLE64_TEST_HI 6 + +/* i210 reg test */ +static struct igb_reg_test reg_test_i210[] = { + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + /* RDH is read-only for i210, only test RDT. */ + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0003FFF0, 0x0003FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, + 0x900FFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128, TABLE32_TEST, + 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +/* i350 reg test */ +static struct igb_reg_test reg_test_i350[] = { + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + /* VET is readonly on i350 */ + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + /* RDH is read-only for i350, only test RDT. */ + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, + 0xC3FFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 16, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 16, TABLE64_TEST_HI, + 0xC3FFFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128, TABLE32_TEST, + 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +/* 82580 reg test */ +static struct igb_reg_test reg_test_82580[] = { + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + /* RDH is read-only for 82580, only test RDT. */ + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, + 0x83FFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 8, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 8, TABLE64_TEST_HI, + 0x83FFFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128, TABLE32_TEST, + 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +/* 82576 reg test */ +static struct igb_reg_test reg_test_82576[] = { + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_RDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + /* Enable all queues before testing. */ + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, + { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, + /* RDH is read-only for 82576, only test RDT. */ + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RDT(4), 0x40, 12, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 }, + { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0, 0 }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_TDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, + 0x83FFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 8, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 8, TABLE64_TEST_HI, + 0x83FFFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128, TABLE32_TEST, + 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +/* 82575 register test */ +static struct igb_reg_test reg_test_82575[] = { + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + /* Enable all four RX queues before testing. */ + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, + /* RDH is read-only for 82575, only test RDT. */ + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_TXCW, 0x100, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, + 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, + 0x800FFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128, TABLE32_TEST, + 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; diff --git a/kernel/linux/kni/ethtool/igb/igb_vmdq.c b/kernel/linux/kni/ethtool/igb/igb_vmdq.c new file mode 100644 index 00000000..cdd807b9 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb_vmdq.c @@ -0,0 +1,421 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + + +#include <linux/tcp.h> + +#include "igb.h" +#include "igb_vmdq.h" +#include <linux/if_vlan.h> + +#ifdef CONFIG_IGB_VMDQ_NETDEV +int igb_vmdq_open(struct net_device *dev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + struct net_device *main_netdev = adapter->netdev; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + if (test_bit(__IGB_DOWN, &adapter->state)) { + DPRINTK(DRV, WARNING, + "Open %s before opening this device.\n", + main_netdev->name); + return -EAGAIN; + } + netif_carrier_off(dev); + vadapter->tx_ring->vmdq_netdev = dev; + vadapter->rx_ring->vmdq_netdev = dev; + if (is_valid_ether_addr(dev->dev_addr)) { + igb_del_mac_filter(adapter, dev->dev_addr, hw_queue); + igb_add_mac_filter(adapter, dev->dev_addr, hw_queue); + } + netif_carrier_on(dev); + return 0; +} + +int igb_vmdq_close(struct net_device *dev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + netif_carrier_off(dev); + igb_del_mac_filter(adapter, dev->dev_addr, hw_queue); + + vadapter->tx_ring->vmdq_netdev = NULL; + vadapter->rx_ring->vmdq_netdev = NULL; + return 0; +} + +netdev_tx_t igb_vmdq_xmit_frame(struct sk_buff *skb, struct net_device *dev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + + return igb_xmit_frame_ring(skb, vadapter->tx_ring); +} + +struct net_device_stats *igb_vmdq_get_stats(struct net_device *dev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + struct e1000_hw *hw = &adapter->hw; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + vadapter->net_stats.rx_packets += + E1000_READ_REG(hw, E1000_PFVFGPRC(hw_queue)); + E1000_WRITE_REG(hw, E1000_PFVFGPRC(hw_queue), 0); + vadapter->net_stats.tx_packets += + E1000_READ_REG(hw, E1000_PFVFGPTC(hw_queue)); + E1000_WRITE_REG(hw, E1000_PFVFGPTC(hw_queue), 0); + vadapter->net_stats.rx_bytes += + E1000_READ_REG(hw, E1000_PFVFGORC(hw_queue)); + E1000_WRITE_REG(hw, E1000_PFVFGORC(hw_queue), 0); + vadapter->net_stats.tx_bytes += + E1000_READ_REG(hw, E1000_PFVFGOTC(hw_queue)); + E1000_WRITE_REG(hw, E1000_PFVFGOTC(hw_queue), 0); + vadapter->net_stats.multicast += + E1000_READ_REG(hw, E1000_PFVFMPRC(hw_queue)); + E1000_WRITE_REG(hw, E1000_PFVFMPRC(hw_queue), 0); + /* only return the current stats */ + return &vadapter->net_stats; +} + +/** + * igb_write_vm_addr_list - write unicast addresses to RAR table + * @netdev: network interface device structure + * + * Writes unicast address list to the RAR table. + * Returns: -ENOMEM on failure/insufficient address space + * 0 on no addresses written + * X on writing X addresses to the RAR table + **/ +static int igb_write_vm_addr_list(struct net_device *netdev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); + struct igb_adapter *adapter = vadapter->real_adapter; + int count = 0; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + /* return ENOMEM indicating insufficient memory for addresses */ + if (netdev_uc_count(netdev) > igb_available_rars(adapter)) + return -ENOMEM; + + if (!netdev_uc_empty(netdev)) { +#ifdef NETDEV_HW_ADDR_T_UNICAST + struct netdev_hw_addr *ha; +#else + struct dev_mc_list *ha; +#endif + netdev_for_each_uc_addr(ha, netdev) { +#ifdef NETDEV_HW_ADDR_T_UNICAST + igb_del_mac_filter(adapter, ha->addr, hw_queue); + igb_add_mac_filter(adapter, ha->addr, hw_queue); +#else + igb_del_mac_filter(adapter, ha->da_addr, hw_queue); + igb_add_mac_filter(adapter, ha->da_addr, hw_queue); +#endif + count++; + } + } + return count; +} + + +#define E1000_VMOLR_UPE 0x20000000 /* Unicast promiscuous mode */ +void igb_vmdq_set_rx_mode(struct net_device *dev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + struct e1000_hw *hw = &adapter->hw; + u32 vmolr, rctl; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + /* Check for Promiscuous and All Multicast modes */ + vmolr = E1000_READ_REG(hw, E1000_VMOLR(hw_queue)); + + /* clear the affected bits */ + vmolr &= ~(E1000_VMOLR_UPE | E1000_VMOLR_MPME | + E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE); + + if (dev->flags & IFF_PROMISC) { + vmolr |= E1000_VMOLR_UPE; + rctl = E1000_READ_REG(hw, E1000_RCTL); + rctl |= E1000_RCTL_UPE; + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + } else { + rctl = E1000_READ_REG(hw, E1000_RCTL); + rctl &= ~E1000_RCTL_UPE; + E1000_WRITE_REG(hw, E1000_RCTL, rctl); + if (dev->flags & IFF_ALLMULTI) { + vmolr |= E1000_VMOLR_MPME; + } else { + /* + * Write addresses to the MTA, if the attempt fails + * then we should just turn on promiscuous mode so + * that we can at least receive multicast traffic + */ + if (igb_write_mc_addr_list(adapter->netdev) != 0) + vmolr |= E1000_VMOLR_ROMPE; + } +#ifdef HAVE_SET_RX_MODE + /* + * Write addresses to available RAR registers, if there is not + * sufficient space to store all the addresses then enable + * unicast promiscuous mode + */ + if (igb_write_vm_addr_list(dev) < 0) + vmolr |= E1000_VMOLR_UPE; +#endif + } + E1000_WRITE_REG(hw, E1000_VMOLR(hw_queue), vmolr); + + return; +} + +int igb_vmdq_set_mac(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + igb_del_mac_filter(adapter, dev->dev_addr, hw_queue); + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + return igb_add_mac_filter(adapter, dev->dev_addr, hw_queue); +} + +int igb_vmdq_change_mtu(struct net_device *dev, int new_mtu) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + + if (adapter->netdev->mtu < new_mtu) { + DPRINTK(PROBE, INFO, + "Set MTU on %s to >= %d " + "before changing MTU on %s\n", + adapter->netdev->name, new_mtu, dev->name); + return -EINVAL; + } + dev->mtu = new_mtu; + return 0; +} + +void igb_vmdq_tx_timeout(struct net_device *dev) +{ + return; +} + +void igb_vmdq_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + struct e1000_hw *hw = &adapter->hw; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + vadapter->vlgrp = grp; + + igb_enable_vlan_tags(adapter); + E1000_WRITE_REG(hw, E1000_VMVIR(hw_queue), 0); + + return; +} +void igb_vmdq_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; +#ifndef HAVE_NETDEV_VLAN_FEATURES + struct net_device *v_netdev; +#endif + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + /* attempt to add filter to vlvf array */ + igb_vlvf_set(adapter, vid, TRUE, hw_queue); + +#ifndef HAVE_NETDEV_VLAN_FEATURES + + /* Copy feature flags from netdev to the vlan netdev for this vid. + * This allows things like TSO to bubble down to our vlan device. + */ + v_netdev = vlan_group_get_device(vadapter->vlgrp, vid); + v_netdev->features |= adapter->netdev->features; + vlan_group_set_device(vadapter->vlgrp, vid, v_netdev); +#endif + + return; +} +void igb_vmdq_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(dev); + struct igb_adapter *adapter = vadapter->real_adapter; + int hw_queue = vadapter->rx_ring->queue_index + + adapter->vfs_allocated_count; + + vlan_group_set_device(vadapter->vlgrp, vid, NULL); + /* remove vlan from VLVF table array */ + igb_vlvf_set(adapter, vid, FALSE, hw_queue); + + + return; +} + +static int igb_vmdq_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); + struct igb_adapter *adapter = vadapter->real_adapter; + struct e1000_hw *hw = &adapter->hw; + u32 status; + + if (hw->phy.media_type == e1000_media_type_copper) { + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full| + SUPPORTED_Autoneg | + SUPPORTED_TP); + ecmd->advertising = ADVERTISED_TP; + + if (hw->mac.autoneg == 1) { + ecmd->advertising |= ADVERTISED_Autoneg; + /* the e1000 autoneg seems to match ethtool nicely */ + ecmd->advertising |= hw->phy.autoneg_advertised; + } + + ecmd->port = PORT_TP; + ecmd->phy_address = hw->phy.addr; + } else { + ecmd->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg); + + ecmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg); + + ecmd->port = PORT_FIBRE; + } + + ecmd->transceiver = XCVR_INTERNAL; + + status = E1000_READ_REG(hw, E1000_STATUS); + + if (status & E1000_STATUS_LU) { + + if ((status & E1000_STATUS_SPEED_1000) || + hw->phy.media_type != e1000_media_type_copper) + ecmd->speed = SPEED_1000; + else if (status & E1000_STATUS_SPEED_100) + ecmd->speed = SPEED_100; + else + ecmd->speed = SPEED_10; + + if ((status & E1000_STATUS_FD) || + hw->phy.media_type != e1000_media_type_copper) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE; + return 0; +} + + +static u32 igb_vmdq_get_msglevel(struct net_device *netdev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); + struct igb_adapter *adapter = vadapter->real_adapter; + return adapter->msg_enable; +} + +static void igb_vmdq_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); + struct igb_adapter *adapter = vadapter->real_adapter; + struct net_device *main_netdev = adapter->netdev; + + strncpy(drvinfo->driver, igb_driver_name, 32); + strncpy(drvinfo->version, igb_driver_version, 32); + + strncpy(drvinfo->fw_version, "N/A", 4); + snprintf(drvinfo->bus_info, 32, "%s VMDQ %d", main_netdev->name, + vadapter->rx_ring->queue_index); + drvinfo->n_stats = 0; + drvinfo->testinfo_len = 0; + drvinfo->regdump_len = 0; +} + +static void igb_vmdq_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); + + struct igb_ring *tx_ring = vadapter->tx_ring; + struct igb_ring *rx_ring = vadapter->rx_ring; + + ring->rx_max_pending = IGB_MAX_RXD; + ring->tx_max_pending = IGB_MAX_TXD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = rx_ring->count; + ring->tx_pending = tx_ring->count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} +static u32 igb_vmdq_get_rx_csum(struct net_device *netdev) +{ + struct igb_vmdq_adapter *vadapter = netdev_priv(netdev); + struct igb_adapter *adapter = vadapter->real_adapter; + + return test_bit(IGB_RING_FLAG_RX_CSUM, &adapter->rx_ring[0]->flags); +} + + +static struct ethtool_ops igb_vmdq_ethtool_ops = { + .get_settings = igb_vmdq_get_settings, + .get_drvinfo = igb_vmdq_get_drvinfo, + .get_link = ethtool_op_get_link, + .get_ringparam = igb_vmdq_get_ringparam, + .get_rx_csum = igb_vmdq_get_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_msglevel = igb_vmdq_get_msglevel, +#ifdef NETIF_F_TSO + .get_tso = ethtool_op_get_tso, +#endif +#ifdef HAVE_ETHTOOL_GET_PERM_ADDR + .get_perm_addr = ethtool_op_get_perm_addr, +#endif +}; + +void igb_vmdq_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &igb_vmdq_ethtool_ops); +} + + +#endif /* CONFIG_IGB_VMDQ_NETDEV */ diff --git a/kernel/linux/kni/ethtool/igb/igb_vmdq.h b/kernel/linux/kni/ethtool/igb/igb_vmdq.h new file mode 100644 index 00000000..e68c48cf --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/igb_vmdq.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IGB_VMDQ_H_ +#define _IGB_VMDQ_H_ + +#ifdef CONFIG_IGB_VMDQ_NETDEV +int igb_vmdq_open(struct net_device *dev); +int igb_vmdq_close(struct net_device *dev); +netdev_tx_t igb_vmdq_xmit_frame(struct sk_buff *skb, struct net_device *dev); +struct net_device_stats *igb_vmdq_get_stats(struct net_device *dev); +void igb_vmdq_set_rx_mode(struct net_device *dev); +int igb_vmdq_set_mac(struct net_device *dev, void *addr); +int igb_vmdq_change_mtu(struct net_device *dev, int new_mtu); +void igb_vmdq_tx_timeout(struct net_device *dev); +void igb_vmdq_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp); +void igb_vmdq_vlan_rx_add_vid(struct net_device *dev, unsigned short vid); +void igb_vmdq_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid); +void igb_vmdq_set_ethtool_ops(struct net_device *netdev); +#endif /* CONFIG_IGB_VMDQ_NETDEV */ +#endif /* _IGB_VMDQ_H_ */ diff --git a/kernel/linux/kni/ethtool/igb/kcompat.h b/kernel/linux/kni/ethtool/igb/kcompat.h new file mode 100644 index 00000000..ae1b5309 --- /dev/null +++ b/kernel/linux/kni/ethtool/igb/kcompat.h @@ -0,0 +1,3945 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel(R) Gigabit Ethernet Linux driver + Copyright(c) 2007-2013 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _KCOMPAT_H_ +#define _KCOMPAT_H_ + +#ifndef LINUX_VERSION_CODE +#include <linux/version.h> +#else +#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) +#endif +#include <linux/init.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/udp.h> +#include <linux/mii.h> +#include <linux/vmalloc.h> +#include <asm/io.h> +#include <linux/ethtool.h> +#include <linux/if_vlan.h> + +/* NAPI enable/disable flags here */ +#define NAPI + +#define adapter_struct igb_adapter +#define adapter_q_vector igb_q_vector +#define NAPI + +/* and finally set defines so that the code sees the changes */ +#ifdef NAPI +#else +#endif /* NAPI */ + +/* packet split disable/enable */ +#ifdef DISABLE_PACKET_SPLIT +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT +#define CONFIG_IGB_DISABLE_PACKET_SPLIT +#endif +#endif /* DISABLE_PACKET_SPLIT */ + +/* MSI compatibility code for all kernels and drivers */ +#ifdef DISABLE_PCI_MSI +#undef CONFIG_PCI_MSI +#endif +#ifndef CONFIG_PCI_MSI +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) ) +struct msix_entry { + u16 vector; /* kernel uses to write allocated vector */ + u16 entry; /* driver uses to specify entry, OS writes */ +}; +#endif +#undef pci_enable_msi +#define pci_enable_msi(a) -ENOTSUPP +#undef pci_disable_msi +#define pci_disable_msi(a) do {} while (0) +#undef pci_enable_msix +#define pci_enable_msix(a, b, c) -ENOTSUPP +#undef pci_disable_msix +#define pci_disable_msix(a) do {} while (0) +#define msi_remove_pci_irq_vectors(a) do {} while (0) +#endif /* CONFIG_PCI_MSI */ +#ifdef DISABLE_PM +#undef CONFIG_PM +#endif + +#ifdef DISABLE_NET_POLL_CONTROLLER +#undef CONFIG_NET_POLL_CONTROLLER +#endif + +#ifndef PMSG_SUSPEND +#define PMSG_SUSPEND 3 +#endif + +/* generic boolean compatibility */ +#undef TRUE +#undef FALSE +#define TRUE true +#define FALSE false +#ifdef GCC_VERSION +#if ( GCC_VERSION < 3000 ) +#define _Bool char +#endif +#else +#define _Bool char +#endif + +/* kernels less than 2.4.14 don't have this */ +#ifndef ETH_P_8021Q +#define ETH_P_8021Q 0x8100 +#endif + +#ifndef module_param +#define module_param(v,t,p) MODULE_PARM(v, "i"); +#endif + +#ifndef DMA_64BIT_MASK +#define DMA_64BIT_MASK 0xffffffffffffffffULL +#endif + +#ifndef DMA_32BIT_MASK +#define DMA_32BIT_MASK 0x00000000ffffffffULL +#endif + +#ifndef PCI_CAP_ID_EXP +#define PCI_CAP_ID_EXP 0x10 +#endif + +#ifndef PCIE_LINK_STATE_L0S +#define PCIE_LINK_STATE_L0S 1 +#endif +#ifndef PCIE_LINK_STATE_L1 +#define PCIE_LINK_STATE_L1 2 +#endif + +#ifndef mmiowb +#ifdef CONFIG_IA64 +#define mmiowb() asm volatile ("mf.a" ::: "memory") +#else +#define mmiowb() +#endif +#endif + +#ifndef SET_NETDEV_DEV +#define SET_NETDEV_DEV(net, pdev) +#endif + +#if !defined(HAVE_FREE_NETDEV) && ( LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0) ) +#define free_netdev(x) kfree(x) +#endif + +#ifdef HAVE_POLL_CONTROLLER +#define CONFIG_NET_POLL_CONTROLLER +#endif + +#ifndef SKB_DATAREF_SHIFT +/* if we do not have the infrastructure to detect if skb_header is cloned + just return false in all cases */ +#define skb_header_cloned(x) 0 +#endif + +#ifndef NETIF_F_GSO +#define gso_size tso_size +#define gso_segs tso_segs +#endif + +#ifndef NETIF_F_GRO +#define vlan_gro_receive(_napi, _vlgrp, _vlan, _skb) \ + vlan_hwaccel_receive_skb(_skb, _vlgrp, _vlan) +#define napi_gro_receive(_napi, _skb) netif_receive_skb(_skb) +#endif + +#ifndef NETIF_F_SCTP_CSUM +#define NETIF_F_SCTP_CSUM 0 +#endif + +#ifndef NETIF_F_LRO +#define NETIF_F_LRO (1 << 15) +#endif + +#ifndef NETIF_F_NTUPLE +#define NETIF_F_NTUPLE (1 << 27) +#endif + +#ifndef IPPROTO_SCTP +#define IPPROTO_SCTP 132 +#endif + +#ifndef CHECKSUM_PARTIAL +#define CHECKSUM_PARTIAL CHECKSUM_HW +#define CHECKSUM_COMPLETE CHECKSUM_HW +#endif + +#ifndef __read_mostly +#define __read_mostly +#endif + +#ifndef MII_RESV1 +#define MII_RESV1 0x17 /* Reserved... */ +#endif + +#ifndef unlikely +#define unlikely(_x) _x +#define likely(_x) _x +#endif + +#ifndef WARN_ON +#define WARN_ON(x) +#endif + +#ifndef PCI_DEVICE +#define PCI_DEVICE(vend,dev) \ + .vendor = (vend), .device = (dev), \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID +#endif + +#ifndef node_online +#define node_online(node) ((node) == 0) +#endif + +#ifndef num_online_cpus +#define num_online_cpus() smp_num_cpus +#endif + +#ifndef cpu_online +#define cpu_online(cpuid) test_bit((cpuid), &cpu_online_map) +#endif + +#ifndef _LINUX_RANDOM_H +#include <linux/random.h> +#endif + +#ifndef DECLARE_BITMAP +#ifndef BITS_TO_LONGS +#define BITS_TO_LONGS(bits) (((bits)+BITS_PER_LONG-1)/BITS_PER_LONG) +#endif +#define DECLARE_BITMAP(name,bits) long name[BITS_TO_LONGS(bits)] +#endif + +#ifndef VLAN_HLEN +#define VLAN_HLEN 4 +#endif + +#ifndef VLAN_ETH_HLEN +#define VLAN_ETH_HLEN 18 +#endif + +#ifndef VLAN_ETH_FRAME_LEN +#define VLAN_ETH_FRAME_LEN 1518 +#endif + +#if !defined(IXGBE_DCA) && !defined(IGB_DCA) +#define dca_get_tag(b) 0 +#define dca_add_requester(a) -1 +#define dca_remove_requester(b) do { } while(0) +#define DCA_PROVIDER_ADD 0x0001 +#define DCA_PROVIDER_REMOVE 0x0002 +#endif + +#ifndef DCA_GET_TAG_TWO_ARGS +#define dca3_get_tag(a,b) dca_get_tag(b) +#endif + +#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +#if defined(__i386__) || defined(__x86_64__) +#define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +#endif +#endif + +/* taken from 2.6.24 definition in linux/kernel.h */ +#ifndef IS_ALIGNED +#define IS_ALIGNED(x,a) (((x) % ((typeof(x))(a))) == 0) +#endif + +#ifdef IS_ENABLED +#undef IS_ENABLED +#undef __ARG_PLACEHOLDER_1 +#undef config_enabled +#undef _config_enabled +#undef __config_enabled +#undef ___config_enabled +#endif + +#define __ARG_PLACEHOLDER_1 0, +#define config_enabled(cfg) _config_enabled(cfg) +#define _config_enabled(value) __config_enabled(__ARG_PLACEHOLDER_##value) +#define __config_enabled(arg1_or_junk) ___config_enabled(arg1_or_junk 1, 0) +#define ___config_enabled(__ignored, val, ...) val + +#define IS_ENABLED(option) \ + (config_enabled(option) || config_enabled(option##_MODULE)) + +#if !defined(NETIF_F_HW_VLAN_TX) && !defined(NETIF_F_HW_VLAN_CTAG_TX) +struct _kc_vlan_ethhdr { + unsigned char h_dest[ETH_ALEN]; + unsigned char h_source[ETH_ALEN]; + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + __be16 h_vlan_encapsulated_proto; +}; +#define vlan_ethhdr _kc_vlan_ethhdr +struct _kc_vlan_hdr { + __be16 h_vlan_TCI; + __be16 h_vlan_encapsulated_proto; +}; +#define vlan_hdr _kc_vlan_hdr +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ) +#define vlan_tx_tag_present(_skb) 0 +#define vlan_tx_tag_get(_skb) 0 +#endif +#endif /* NETIF_F_HW_VLAN_TX && NETIF_F_HW_VLAN_CTAG_TX */ + +#ifndef VLAN_PRIO_SHIFT +#define VLAN_PRIO_SHIFT 13 +#endif + + +#ifndef __GFP_COLD +#define __GFP_COLD 0 +#endif + +#ifndef __GFP_COMP +#define __GFP_COMP 0 +#endif + +/*****************************************************************************/ +/* Installations with ethtool version without eeprom, adapter id, or statistics + * support */ + +#ifndef ETH_GSTRING_LEN +#define ETH_GSTRING_LEN 32 +#endif + +#ifndef ETHTOOL_GSTATS +#define ETHTOOL_GSTATS 0x1d +#undef ethtool_drvinfo +#define ethtool_drvinfo k_ethtool_drvinfo +struct k_ethtool_drvinfo { + u32 cmd; + char driver[32]; + char version[32]; + char fw_version[32]; + char bus_info[32]; + char reserved1[32]; + char reserved2[16]; + u32 n_stats; + u32 testinfo_len; + u32 eedump_len; + u32 regdump_len; +}; + +struct ethtool_stats { + u32 cmd; + u32 n_stats; + u64 data[0]; +}; +#endif /* ETHTOOL_GSTATS */ + +#ifndef ETHTOOL_PHYS_ID +#define ETHTOOL_PHYS_ID 0x1c +#endif /* ETHTOOL_PHYS_ID */ + +#ifndef ETHTOOL_GSTRINGS +#define ETHTOOL_GSTRINGS 0x1b +enum ethtool_stringset { + ETH_SS_TEST = 0, + ETH_SS_STATS, +}; +struct ethtool_gstrings { + u32 cmd; /* ETHTOOL_GSTRINGS */ + u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ + u32 len; /* number of strings in the string set */ + u8 data[0]; +}; +#endif /* ETHTOOL_GSTRINGS */ + +#ifndef ETHTOOL_TEST +#define ETHTOOL_TEST 0x1a +enum ethtool_test_flags { + ETH_TEST_FL_OFFLINE = (1 << 0), + ETH_TEST_FL_FAILED = (1 << 1), +}; +struct ethtool_test { + u32 cmd; + u32 flags; + u32 reserved; + u32 len; + u64 data[0]; +}; +#endif /* ETHTOOL_TEST */ + +#ifndef ETHTOOL_GEEPROM +#define ETHTOOL_GEEPROM 0xb +#undef ETHTOOL_GREGS +struct ethtool_eeprom { + u32 cmd; + u32 magic; + u32 offset; + u32 len; + u8 data[0]; +}; + +struct ethtool_value { + u32 cmd; + u32 data; +}; +#endif /* ETHTOOL_GEEPROM */ + +#ifndef ETHTOOL_GLINK +#define ETHTOOL_GLINK 0xa +#endif /* ETHTOOL_GLINK */ + +#ifndef ETHTOOL_GWOL +#define ETHTOOL_GWOL 0x5 +#define ETHTOOL_SWOL 0x6 +#define SOPASS_MAX 6 +struct ethtool_wolinfo { + u32 cmd; + u32 supported; + u32 wolopts; + u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ +}; +#endif /* ETHTOOL_GWOL */ + +#ifndef ETHTOOL_GREGS +#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers */ +#define ethtool_regs _kc_ethtool_regs +/* for passing big chunks of data */ +struct _kc_ethtool_regs { + u32 cmd; + u32 version; /* driver-specific, indicates different chips/revs */ + u32 len; /* bytes */ + u8 data[0]; +}; +#endif /* ETHTOOL_GREGS */ + +#ifndef ETHTOOL_GMSGLVL +#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ +#endif +#ifndef ETHTOOL_SMSGLVL +#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level, priv. */ +#endif +#ifndef ETHTOOL_NWAY_RST +#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation, priv */ +#endif +#ifndef ETHTOOL_GLINK +#define ETHTOOL_GLINK 0x0000000a /* Get link status */ +#endif +#ifndef ETHTOOL_GEEPROM +#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ +#endif +#ifndef ETHTOOL_SEEPROM +#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data */ +#endif +#ifndef ETHTOOL_GCOALESCE +#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ +/* for configuring coalescing parameters of chip */ +#define ethtool_coalesce _kc_ethtool_coalesce +struct _kc_ethtool_coalesce { + u32 cmd; /* ETHTOOL_{G,S}COALESCE */ + + /* How many usecs to delay an RX interrupt after + * a packet arrives. If 0, only rx_max_coalesced_frames + * is used. + */ + u32 rx_coalesce_usecs; + + /* How many packets to delay an RX interrupt after + * a packet arrives. If 0, only rx_coalesce_usecs is + * used. It is illegal to set both usecs and max frames + * to zero as this would cause RX interrupts to never be + * generated. + */ + u32 rx_max_coalesced_frames; + + /* Same as above two parameters, except that these values + * apply while an IRQ is being serviced by the host. Not + * all cards support this feature and the values are ignored + * in that case. + */ + u32 rx_coalesce_usecs_irq; + u32 rx_max_coalesced_frames_irq; + + /* How many usecs to delay a TX interrupt after + * a packet is sent. If 0, only tx_max_coalesced_frames + * is used. + */ + u32 tx_coalesce_usecs; + + /* How many packets to delay a TX interrupt after + * a packet is sent. If 0, only tx_coalesce_usecs is + * used. It is illegal to set both usecs and max frames + * to zero as this would cause TX interrupts to never be + * generated. + */ + u32 tx_max_coalesced_frames; + + /* Same as above two parameters, except that these values + * apply while an IRQ is being serviced by the host. Not + * all cards support this feature and the values are ignored + * in that case. + */ + u32 tx_coalesce_usecs_irq; + u32 tx_max_coalesced_frames_irq; + + /* How many usecs to delay in-memory statistics + * block updates. Some drivers do not have an in-memory + * statistic block, and in such cases this value is ignored. + * This value must not be zero. + */ + u32 stats_block_coalesce_usecs; + + /* Adaptive RX/TX coalescing is an algorithm implemented by + * some drivers to improve latency under low packet rates and + * improve throughput under high packet rates. Some drivers + * only implement one of RX or TX adaptive coalescing. Anything + * not implemented by the driver causes these values to be + * silently ignored. + */ + u32 use_adaptive_rx_coalesce; + u32 use_adaptive_tx_coalesce; + + /* When the packet rate (measured in packets per second) + * is below pkt_rate_low, the {rx,tx}_*_low parameters are + * used. + */ + u32 pkt_rate_low; + u32 rx_coalesce_usecs_low; + u32 rx_max_coalesced_frames_low; + u32 tx_coalesce_usecs_low; + u32 tx_max_coalesced_frames_low; + + /* When the packet rate is below pkt_rate_high but above + * pkt_rate_low (both measured in packets per second) the + * normal {rx,tx}_* coalescing parameters are used. + */ + + /* When the packet rate is (measured in packets per second) + * is above pkt_rate_high, the {rx,tx}_*_high parameters are + * used. + */ + u32 pkt_rate_high; + u32 rx_coalesce_usecs_high; + u32 rx_max_coalesced_frames_high; + u32 tx_coalesce_usecs_high; + u32 tx_max_coalesced_frames_high; + + /* How often to do adaptive coalescing packet rate sampling, + * measured in seconds. Must not be zero. + */ + u32 rate_sample_interval; +}; +#endif /* ETHTOOL_GCOALESCE */ + +#ifndef ETHTOOL_SCOALESCE +#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ +#endif +#ifndef ETHTOOL_GRINGPARAM +#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ +/* for configuring RX/TX ring parameters */ +#define ethtool_ringparam _kc_ethtool_ringparam +struct _kc_ethtool_ringparam { + u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ + + /* Read only attributes. These indicate the maximum number + * of pending RX/TX ring entries the driver will allow the + * user to set. + */ + u32 rx_max_pending; + u32 rx_mini_max_pending; + u32 rx_jumbo_max_pending; + u32 tx_max_pending; + + /* Values changeable by the user. The valid values are + * in the range 1 to the "*_max_pending" counterpart above. + */ + u32 rx_pending; + u32 rx_mini_pending; + u32 rx_jumbo_pending; + u32 tx_pending; +}; +#endif /* ETHTOOL_GRINGPARAM */ + +#ifndef ETHTOOL_SRINGPARAM +#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters, priv. */ +#endif +#ifndef ETHTOOL_GPAUSEPARAM +#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ +/* for configuring link flow control parameters */ +#define ethtool_pauseparam _kc_ethtool_pauseparam +struct _kc_ethtool_pauseparam { + u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ + + /* If the link is being auto-negotiated (via ethtool_cmd.autoneg + * being true) the user may set 'autoneg' here non-zero to have the + * pause parameters be auto-negotiated too. In such a case, the + * {rx,tx}_pause values below determine what capabilities are + * advertised. + * + * If 'autoneg' is zero or the link is not being auto-negotiated, + * then {rx,tx}_pause force the driver to use/not-use pause + * flow control. + */ + u32 autoneg; + u32 rx_pause; + u32 tx_pause; +}; +#endif /* ETHTOOL_GPAUSEPARAM */ + +#ifndef ETHTOOL_SPAUSEPARAM +#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ +#endif +#ifndef ETHTOOL_GRXCSUM +#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_SRXCSUM +#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_GTXCSUM +#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_STXCSUM +#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_GSG +#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable + * (ethtool_value) */ +#endif +#ifndef ETHTOOL_SSG +#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable + * (ethtool_value). */ +#endif +#ifndef ETHTOOL_TEST +#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test, priv. */ +#endif +#ifndef ETHTOOL_GSTRINGS +#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ +#endif +#ifndef ETHTOOL_PHYS_ID +#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ +#endif +#ifndef ETHTOOL_GSTATS +#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ +#endif +#ifndef ETHTOOL_GTSO +#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_STSO +#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ +#endif + +#ifndef ETHTOOL_BUSINFO_LEN +#define ETHTOOL_BUSINFO_LEN 32 +#endif + +#ifndef RHEL_RELEASE_VERSION +#define RHEL_RELEASE_VERSION(a,b) (((a) << 8) + (b)) +#endif +#ifndef AX_RELEASE_VERSION +#define AX_RELEASE_VERSION(a,b) (((a) << 8) + (b)) +#endif + +#ifndef AX_RELEASE_CODE +#define AX_RELEASE_CODE 0 +#endif + +#if (AX_RELEASE_CODE && AX_RELEASE_CODE == AX_RELEASE_VERSION(3,0)) +#define RHEL_RELEASE_CODE RHEL_RELEASE_VERSION(5,0) +#elif (AX_RELEASE_CODE && AX_RELEASE_CODE == AX_RELEASE_VERSION(3,1)) +#define RHEL_RELEASE_CODE RHEL_RELEASE_VERSION(5,1) +#elif (AX_RELEASE_CODE && AX_RELEASE_CODE == AX_RELEASE_VERSION(3,2)) +#define RHEL_RELEASE_CODE RHEL_RELEASE_VERSION(5,3) +#endif + +#ifndef RHEL_RELEASE_CODE +/* NOTE: RHEL_RELEASE_* introduced in RHEL4.5 */ +#define RHEL_RELEASE_CODE 0 +#endif + +/* SuSE version macro is the same as Linux kernel version */ +#ifndef SLE_VERSION +#define SLE_VERSION(a,b,c) KERNEL_VERSION(a,b,c) +#endif +#ifdef CONFIG_SUSE_KERNEL +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 4, 57)) +/* SLES12SP3 is at least 4.4.57+ based */ +#define SLE_VERSION_CODE SLE_VERSION(12, 3, 0) +#elif ( LINUX_VERSION_CODE >= KERNEL_VERSION(3,12,28) ) +/* SLES12 is at least 3.12.28+ based */ +#define SLE_VERSION_CODE SLE_VERSION(12,0,0) +#elif ((LINUX_VERSION_CODE >= KERNEL_VERSION(3,0,61)) && \ + (LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0))) +/* SLES11 SP3 is at least 3.0.61+ based */ +#define SLE_VERSION_CODE SLE_VERSION(11,3,0) +#elif ( LINUX_VERSION_CODE == KERNEL_VERSION(2,6,32) ) +/* SLES11 SP1 is 2.6.32 based */ +#define SLE_VERSION_CODE SLE_VERSION(11,1,0) +#elif ( LINUX_VERSION_CODE == KERNEL_VERSION(2,6,27) ) +/* SLES11 GA is 2.6.27 based */ +#define SLE_VERSION_CODE SLE_VERSION(11,0,0) +#endif /* LINUX_VERSION_CODE == KERNEL_VERSION(x,y,z) */ +#endif /* CONFIG_SUSE_KERNEL */ +#ifndef SLE_VERSION_CODE +#define SLE_VERSION_CODE 0 +#endif /* SLE_VERSION_CODE */ + +/* Ubuntu release and kernel codes must be specified from Makefile */ +#ifndef UBUNTU_RELEASE_VERSION +#define UBUNTU_RELEASE_VERSION(a,b) (((a) * 100) + (b)) +#endif +#ifndef UBUNTU_KERNEL_VERSION +#define UBUNTU_KERNEL_VERSION(a,b,c,abi,upload) (((a) << 40) + ((b) << 32) + ((c) << 24) + ((abi) << 8) + (upload)) +#endif +#ifndef UBUNTU_RELEASE_CODE +#define UBUNTU_RELEASE_CODE 0 +#endif +#ifndef UBUNTU_KERNEL_CODE +#define UBUNTU_KERNEL_CODE 0 +#endif + +#ifdef __KLOCWORK__ +#ifdef ARRAY_SIZE +#undef ARRAY_SIZE +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) +#endif +#endif /* __KLOCWORK__ */ + +/*****************************************************************************/ +/* 2.4.3 => 2.4.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3) ) + +/**************************************/ +/* PCI DRIVER API */ + +#ifndef pci_set_dma_mask +#define pci_set_dma_mask _kc_pci_set_dma_mask +extern int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask); +#endif + +#ifndef pci_request_regions +#define pci_request_regions _kc_pci_request_regions +extern int _kc_pci_request_regions(struct pci_dev *pdev, char *res_name); +#endif + +#ifndef pci_release_regions +#define pci_release_regions _kc_pci_release_regions +extern void _kc_pci_release_regions(struct pci_dev *pdev); +#endif + +/**************************************/ +/* NETWORK DRIVER API */ + +#ifndef alloc_etherdev +#define alloc_etherdev _kc_alloc_etherdev +extern struct net_device * _kc_alloc_etherdev(int sizeof_priv); +#endif + +#ifndef is_valid_ether_addr +#define is_valid_ether_addr _kc_is_valid_ether_addr +extern int _kc_is_valid_ether_addr(u8 *addr); +#endif + +/**************************************/ +/* MISCELLANEOUS */ + +#ifndef INIT_TQUEUE +#define INIT_TQUEUE(_tq, _routine, _data) \ + do { \ + INIT_LIST_HEAD(&(_tq)->list); \ + (_tq)->sync = 0; \ + (_tq)->routine = _routine; \ + (_tq)->data = _data; \ + } while (0) +#endif + +#endif /* 2.4.3 => 2.4.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) ) +/* Generic MII registers. */ +#define MII_BMCR 0x00 /* Basic mode control register */ +#define MII_BMSR 0x01 /* Basic mode status register */ +#define MII_PHYSID1 0x02 /* PHYS ID 1 */ +#define MII_PHYSID2 0x03 /* PHYS ID 2 */ +#define MII_ADVERTISE 0x04 /* Advertisement control reg */ +#define MII_LPA 0x05 /* Link partner ability reg */ +#define MII_EXPANSION 0x06 /* Expansion register */ +/* Basic mode control register. */ +#define BMCR_FULLDPLX 0x0100 /* Full duplex */ +#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ +/* Basic mode status register. */ +#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ +#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ +#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ +#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ +#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ +#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ +/* Advertisement control register. */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL) +/* Expansion register for auto-negotiation. */ +#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ +#endif + +/*****************************************************************************/ +/* 2.4.6 => 2.4.3 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6) ) + +#ifndef pci_set_power_state +#define pci_set_power_state _kc_pci_set_power_state +extern int _kc_pci_set_power_state(struct pci_dev *dev, int state); +#endif + +#ifndef pci_enable_wake +#define pci_enable_wake _kc_pci_enable_wake +extern int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable); +#endif + +#ifndef pci_disable_device +#define pci_disable_device _kc_pci_disable_device +extern void _kc_pci_disable_device(struct pci_dev *pdev); +#endif + +/* PCI PM entry point syntax changed, so don't support suspend/resume */ +#undef CONFIG_PM + +#endif /* 2.4.6 => 2.4.3 */ + +#ifndef HAVE_PCI_SET_MWI +#define pci_set_mwi(X) pci_write_config_word(X, \ + PCI_COMMAND, adapter->hw.bus.pci_cmd_word | \ + PCI_COMMAND_INVALIDATE); +#define pci_clear_mwi(X) pci_write_config_word(X, \ + PCI_COMMAND, adapter->hw.bus.pci_cmd_word & \ + ~PCI_COMMAND_INVALIDATE); +#endif + +/*****************************************************************************/ +/* 2.4.10 => 2.4.9 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,10) ) + +/**************************************/ +/* MODULE API */ + +#ifndef MODULE_LICENSE + #define MODULE_LICENSE(X) +#endif + +/**************************************/ +/* OTHER */ + +#undef min +#define min(x,y) ({ \ + const typeof(x) _x = (x); \ + const typeof(y) _y = (y); \ + (void) (&_x == &_y); \ + _x < _y ? _x : _y; }) + +#undef max +#define max(x,y) ({ \ + const typeof(x) _x = (x); \ + const typeof(y) _y = (y); \ + (void) (&_x == &_y); \ + _x > _y ? _x : _y; }) + +#define min_t(type,x,y) ({ \ + type _x = (x); \ + type _y = (y); \ + _x < _y ? _x : _y; }) + +#define max_t(type,x,y) ({ \ + type _x = (x); \ + type _y = (y); \ + _x > _y ? _x : _y; }) + +#ifndef list_for_each_safe +#define list_for_each_safe(pos, n, head) \ + for (pos = (head)->next, n = pos->next; pos != (head); \ + pos = n, n = pos->next) +#endif + +#ifndef ____cacheline_aligned_in_smp +#ifdef CONFIG_SMP +#define ____cacheline_aligned_in_smp ____cacheline_aligned +#else +#define ____cacheline_aligned_in_smp +#endif /* CONFIG_SMP */ +#endif + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) ) +extern int _kc_snprintf(char * buf, size_t size, const char *fmt, ...); +#define snprintf(buf, size, fmt, args...) _kc_snprintf(buf, size, fmt, ##args) +extern int _kc_vsnprintf(char *buf, size_t size, const char *fmt, va_list args); +#define vsnprintf(buf, size, fmt, args) _kc_vsnprintf(buf, size, fmt, args) +#else /* 2.4.8 => 2.4.9 */ +extern int snprintf(char * buf, size_t size, const char *fmt, ...); +extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args); +#endif +#endif /* 2.4.10 -> 2.4.6 */ + + +/*****************************************************************************/ +/* 2.4.12 => 2.4.10 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,12) ) +#ifndef HAVE_NETIF_MSG +#define HAVE_NETIF_MSG 1 +enum { + NETIF_MSG_DRV = 0x0001, + NETIF_MSG_PROBE = 0x0002, + NETIF_MSG_LINK = 0x0004, + NETIF_MSG_TIMER = 0x0008, + NETIF_MSG_IFDOWN = 0x0010, + NETIF_MSG_IFUP = 0x0020, + NETIF_MSG_RX_ERR = 0x0040, + NETIF_MSG_TX_ERR = 0x0080, + NETIF_MSG_TX_QUEUED = 0x0100, + NETIF_MSG_INTR = 0x0200, + NETIF_MSG_TX_DONE = 0x0400, + NETIF_MSG_RX_STATUS = 0x0800, + NETIF_MSG_PKTDATA = 0x1000, + NETIF_MSG_HW = 0x2000, + NETIF_MSG_WOL = 0x4000, +}; + +#define netif_msg_drv(p) ((p)->msg_enable & NETIF_MSG_DRV) +#define netif_msg_probe(p) ((p)->msg_enable & NETIF_MSG_PROBE) +#define netif_msg_link(p) ((p)->msg_enable & NETIF_MSG_LINK) +#define netif_msg_timer(p) ((p)->msg_enable & NETIF_MSG_TIMER) +#define netif_msg_ifdown(p) ((p)->msg_enable & NETIF_MSG_IFDOWN) +#define netif_msg_ifup(p) ((p)->msg_enable & NETIF_MSG_IFUP) +#define netif_msg_rx_err(p) ((p)->msg_enable & NETIF_MSG_RX_ERR) +#define netif_msg_tx_err(p) ((p)->msg_enable & NETIF_MSG_TX_ERR) +#define netif_msg_tx_queued(p) ((p)->msg_enable & NETIF_MSG_TX_QUEUED) +#define netif_msg_intr(p) ((p)->msg_enable & NETIF_MSG_INTR) +#define netif_msg_tx_done(p) ((p)->msg_enable & NETIF_MSG_TX_DONE) +#define netif_msg_rx_status(p) ((p)->msg_enable & NETIF_MSG_RX_STATUS) +#define netif_msg_pktdata(p) ((p)->msg_enable & NETIF_MSG_PKTDATA) +#endif /* !HAVE_NETIF_MSG */ +#endif /* 2.4.12 => 2.4.10 */ + +/*****************************************************************************/ +/* 2.4.13 => 2.4.12 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,13) ) + +/**************************************/ +/* PCI DMA MAPPING */ + +#ifndef virt_to_page + #define virt_to_page(v) (mem_map + (virt_to_phys(v) >> PAGE_SHIFT)) +#endif + +#ifndef pci_map_page +#define pci_map_page _kc_pci_map_page +extern u64 _kc_pci_map_page(struct pci_dev *dev, struct page *page, unsigned long offset, size_t size, int direction); +#endif + +#ifndef pci_unmap_page +#define pci_unmap_page _kc_pci_unmap_page +extern void _kc_pci_unmap_page(struct pci_dev *dev, u64 dma_addr, size_t size, int direction); +#endif + +/* pci_set_dma_mask takes dma_addr_t, which is only 32-bits prior to 2.4.13 */ + +#undef DMA_32BIT_MASK +#define DMA_32BIT_MASK 0xffffffff +#undef DMA_64BIT_MASK +#define DMA_64BIT_MASK 0xffffffff + +/**************************************/ +/* OTHER */ + +#ifndef cpu_relax +#define cpu_relax() rep_nop() +#endif + +struct vlan_ethhdr { + unsigned char h_dest[ETH_ALEN]; + unsigned char h_source[ETH_ALEN]; + unsigned short h_vlan_proto; + unsigned short h_vlan_TCI; + unsigned short h_vlan_encapsulated_proto; +}; +#endif /* 2.4.13 => 2.4.12 */ + +/*****************************************************************************/ +/* 2.4.17 => 2.4.12 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17) ) + +#ifndef __devexit_p + #define __devexit_p(x) &(x) +#endif + +#else + /* For Kernel 3.8 these are not defined - so undefine all */ + #undef __devexit_p + #undef __devexit + #undef __devinit + #undef __devinitdata + #define __devexit_p(x) &(x) + #define __devexit + #define __devinit + #define __devinitdata + +#endif /* 2.4.17 => 2.4.13 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,18) ) +#define NETIF_MSG_HW 0x2000 +#define NETIF_MSG_WOL 0x4000 + +#ifndef netif_msg_hw +#define netif_msg_hw(p) ((p)->msg_enable & NETIF_MSG_HW) +#endif +#ifndef netif_msg_wol +#define netif_msg_wol(p) ((p)->msg_enable & NETIF_MSG_WOL) +#endif +#endif /* 2.4.18 */ + +/*****************************************************************************/ + +/*****************************************************************************/ +/* 2.4.20 => 2.4.19 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,20) ) + +/* we won't support NAPI on less than 2.4.20 */ +#ifdef NAPI +#undef NAPI +#endif + +#endif /* 2.4.20 => 2.4.19 */ + +/*****************************************************************************/ +/* 2.4.22 => 2.4.17 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) ) +#define pci_name(x) ((x)->slot_name) + +#ifndef SUPPORTED_10000baseT_Full +#define SUPPORTED_10000baseT_Full (1 << 12) +#endif +#ifndef ADVERTISED_10000baseT_Full +#define ADVERTISED_10000baseT_Full (1 << 12) +#endif +#endif + +/*****************************************************************************/ +/* 2.4.22 => 2.4.17 */ + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) ) +#ifndef IGB_NO_LRO +#define IGB_NO_LRO +#endif +#endif + +/*****************************************************************************/ +/*****************************************************************************/ +/* 2.4.23 => 2.4.22 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) ) +/*****************************************************************************/ +#ifdef NAPI +#ifndef netif_poll_disable +#define netif_poll_disable(x) _kc_netif_poll_disable(x) +static inline void _kc_netif_poll_disable(struct net_device *netdev) +{ + while (test_and_set_bit(__LINK_STATE_RX_SCHED, &netdev->state)) { + /* No hurry */ + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(1); + } +} +#endif +#ifndef netif_poll_enable +#define netif_poll_enable(x) _kc_netif_poll_enable(x) +static inline void _kc_netif_poll_enable(struct net_device *netdev) +{ + clear_bit(__LINK_STATE_RX_SCHED, &netdev->state); +} +#endif +#endif /* NAPI */ +#ifndef netif_tx_disable +#define netif_tx_disable(x) _kc_netif_tx_disable(x) +static inline void _kc_netif_tx_disable(struct net_device *dev) +{ + spin_lock_bh(&dev->xmit_lock); + netif_stop_queue(dev); + spin_unlock_bh(&dev->xmit_lock); +} +#endif +#else /* 2.4.23 => 2.4.22 */ +#define HAVE_SCTP +#endif /* 2.4.23 => 2.4.22 */ + +/*****************************************************************************/ +/* 2.6.4 => 2.6.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,25) || \ + ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && \ + LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) ) +#define ETHTOOL_OPS_COMPAT +#endif /* 2.6.4 => 2.6.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) ) +#define __user +#endif /* < 2.4.27 */ + +/*****************************************************************************/ +/* 2.5.71 => 2.4.x */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,71) ) +#define sk_protocol protocol +#define pci_get_device pci_find_device +#endif /* 2.5.70 => 2.4.x */ + +/*****************************************************************************/ +/* < 2.4.27 or 2.6.0 <= 2.6.5 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) || \ + ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && \ + LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) ) ) + +#ifndef netif_msg_init +#define netif_msg_init _kc_netif_msg_init +static inline u32 _kc_netif_msg_init(int debug_value, int default_msg_enable_bits) +{ + /* use default */ + if (debug_value < 0 || debug_value >= (sizeof(u32) * 8)) + return default_msg_enable_bits; + if (debug_value == 0) /* no output */ + return 0; + /* set low N bits */ + return (1 << debug_value) -1; +} +#endif + +#endif /* < 2.4.27 or 2.6.0 <= 2.6.5 */ +/*****************************************************************************/ +#if (( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) ) || \ + (( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) && \ + ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,3) ))) +#define netdev_priv(x) x->priv +#endif + +/*****************************************************************************/ +/* <= 2.5.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) ) +#include <linux/rtnetlink.h> +#undef pci_register_driver +#define pci_register_driver pci_module_init + +/* + * Most of the dma compat code is copied/modified from the 2.4.37 + * /include/linux/libata-compat.h header file + */ +/* These definitions mirror those in pci.h, so they can be used + * interchangeably with their PCI_ counterparts */ +enum dma_data_direction { + DMA_BIDIRECTIONAL = 0, + DMA_TO_DEVICE = 1, + DMA_FROM_DEVICE = 2, + DMA_NONE = 3, +}; + +struct device { + struct pci_dev pdev; +}; + +static inline struct pci_dev *to_pci_dev (struct device *dev) +{ + return (struct pci_dev *) dev; +} +static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) +{ + return (struct device *) pdev; +} + +#define pdev_printk(lvl, pdev, fmt, args...) \ + printk("%s %s: " fmt, lvl, pci_name(pdev), ## args) +#define dev_err(dev, fmt, args...) \ + pdev_printk(KERN_ERR, to_pci_dev(dev), fmt, ## args) +#define dev_info(dev, fmt, args...) \ + pdev_printk(KERN_INFO, to_pci_dev(dev), fmt, ## args) +#define dev_warn(dev, fmt, args...) \ + pdev_printk(KERN_WARNING, to_pci_dev(dev), fmt, ## args) +#define dev_notice(dev, fmt, args...) \ + pdev_printk(KERN_NOTICE, to_pci_dev(dev), fmt, ## args) +#define dev_dbg(dev, fmt, args...) \ + pdev_printk(KERN_DEBUG, to_pci_dev(dev), fmt, ## args) + +/* NOTE: dangerous! we ignore the 'gfp' argument */ +#define dma_alloc_coherent(dev,sz,dma,gfp) \ + pci_alloc_consistent(to_pci_dev(dev),(sz),(dma)) +#define dma_free_coherent(dev,sz,addr,dma_addr) \ + pci_free_consistent(to_pci_dev(dev),(sz),(addr),(dma_addr)) + +#define dma_map_page(dev,a,b,c,d) \ + pci_map_page(to_pci_dev(dev),(a),(b),(c),(d)) +#define dma_unmap_page(dev,a,b,c) \ + pci_unmap_page(to_pci_dev(dev),(a),(b),(c)) + +#define dma_map_single(dev,a,b,c) \ + pci_map_single(to_pci_dev(dev),(a),(b),(c)) +#define dma_unmap_single(dev,a,b,c) \ + pci_unmap_single(to_pci_dev(dev),(a),(b),(c)) + +#define dma_map_sg(dev, sg, nents, dir) \ + pci_map_sg(to_pci_dev(dev), (sg), (nents), (dir) +#define dma_unmap_sg(dev, sg, nents, dir) \ + pci_unmap_sg(to_pci_dev(dev), (sg), (nents), (dir) + +#define dma_sync_single(dev,a,b,c) \ + pci_dma_sync_single(to_pci_dev(dev),(a),(b),(c)) + +/* for range just sync everything, that's all the pci API can do */ +#define dma_sync_single_range(dev,addr,off,sz,dir) \ + pci_dma_sync_single(to_pci_dev(dev),(addr),(off)+(sz),(dir)) + +#define dma_set_mask(dev,mask) \ + pci_set_dma_mask(to_pci_dev(dev),(mask)) + +/* hlist_* code - double linked lists */ +struct hlist_head { + struct hlist_node *first; +}; + +struct hlist_node { + struct hlist_node *next, **pprev; +}; + +static inline void __hlist_del(struct hlist_node *n) +{ + struct hlist_node *next = n->next; + struct hlist_node **pprev = n->pprev; + *pprev = next; + if (next) + next->pprev = pprev; +} + +static inline void hlist_del(struct hlist_node *n) +{ + __hlist_del(n); + n->next = NULL; + n->pprev = NULL; +} + +static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h) +{ + struct hlist_node *first = h->first; + n->next = first; + if (first) + first->pprev = &n->next; + h->first = n; + n->pprev = &h->first; +} + +static inline int hlist_empty(const struct hlist_head *h) +{ + return !h->first; +} +#define HLIST_HEAD_INIT { .first = NULL } +#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL } +#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL) +static inline void INIT_HLIST_NODE(struct hlist_node *h) +{ + h->next = NULL; + h->pprev = NULL; +} + +#ifndef might_sleep +#define might_sleep() +#endif +#else +static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) +{ + return &pdev->dev; +} +#endif /* <= 2.5.0 */ + +/*****************************************************************************/ +/* 2.5.28 => 2.4.23 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28) ) + +#include <linux/tqueue.h> +#define work_struct tq_struct +#undef INIT_WORK +#define INIT_WORK(a,b) INIT_TQUEUE(a,(void (*)(void *))b,a) +#undef container_of +#define container_of list_entry +#define schedule_work schedule_task +#define flush_scheduled_work flush_scheduled_tasks +#define cancel_work_sync(x) flush_scheduled_work() + +#endif /* 2.5.28 => 2.4.17 */ + +/*****************************************************************************/ +/* 2.6.0 => 2.5.28 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) +#ifndef read_barrier_depends +#define read_barrier_depends() rmb() +#endif + +#undef get_cpu +#define get_cpu() smp_processor_id() +#undef put_cpu +#define put_cpu() do { } while(0) +#define MODULE_INFO(version, _version) +#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT +#define CONFIG_E1000_DISABLE_PACKET_SPLIT 1 +#endif +#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT +#define CONFIG_IGB_DISABLE_PACKET_SPLIT 1 +#endif + +#define dma_set_coherent_mask(dev,mask) 1 + +#undef dev_put +#define dev_put(dev) __dev_put(dev) + +#ifndef skb_fill_page_desc +#define skb_fill_page_desc _kc_skb_fill_page_desc +extern void _kc_skb_fill_page_desc(struct sk_buff *skb, int i, struct page *page, int off, int size); +#endif + +#undef ALIGN +#define ALIGN(x,a) (((x)+(a)-1)&~((a)-1)) + +#ifndef page_count +#define page_count(p) atomic_read(&(p)->count) +#endif + +#ifdef MAX_NUMNODES +#undef MAX_NUMNODES +#endif +#define MAX_NUMNODES 1 + +/* find_first_bit and find_next bit are not defined for most + * 2.4 kernels (except for the redhat 2.4.21 kernels + */ +#include <linux/bitops.h> +#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) +#undef find_next_bit +#define find_next_bit _kc_find_next_bit +extern unsigned long _kc_find_next_bit(const unsigned long *addr, + unsigned long size, + unsigned long offset); +#define find_first_bit(addr, size) find_next_bit((addr), (size), 0) + + +#ifndef netdev_name +static inline const char *_kc_netdev_name(const struct net_device *dev) +{ + if (strchr(dev->name, '%')) + return "(unregistered net_device)"; + return dev->name; +} +#define netdev_name(netdev) _kc_netdev_name(netdev) +#endif /* netdev_name */ + +#ifndef strlcpy +#define strlcpy _kc_strlcpy +extern size_t _kc_strlcpy(char *dest, const char *src, size_t size); +#endif /* strlcpy */ + +#ifndef do_div +#if BITS_PER_LONG == 64 +# define do_div(n,base) ({ \ + uint32_t __base = (base); \ + uint32_t __rem; \ + __rem = ((uint64_t)(n)) % __base; \ + (n) = ((uint64_t)(n)) / __base; \ + __rem; \ + }) +#elif BITS_PER_LONG == 32 +extern uint32_t _kc__div64_32(uint64_t *dividend, uint32_t divisor); +# define do_div(n,base) ({ \ + uint32_t __base = (base); \ + uint32_t __rem; \ + if (likely(((n) >> 32) == 0)) { \ + __rem = (uint32_t)(n) % __base; \ + (n) = (uint32_t)(n) / __base; \ + } else \ + __rem = _kc__div64_32(&(n), __base); \ + __rem; \ + }) +#else /* BITS_PER_LONG == ?? */ +# error do_div() does not yet support the C64 +#endif /* BITS_PER_LONG */ +#endif /* do_div */ + +#ifndef NSEC_PER_SEC +#define NSEC_PER_SEC 1000000000L +#endif + +#undef HAVE_I2C_SUPPORT +#else /* 2.6.0 */ +#if IS_ENABLED(CONFIG_I2C_ALGOBIT) && \ + (RHEL_RELEASE_CODE && (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,9))) +#define HAVE_I2C_SUPPORT +#endif /* IS_ENABLED(CONFIG_I2C_ALGOBIT) */ + +#endif /* 2.6.0 => 2.5.28 */ +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,3) ) +#define dma_pool pci_pool +#define dma_pool_destroy pci_pool_destroy +#define dma_pool_alloc pci_pool_alloc +#define dma_pool_free pci_pool_free + +#define dma_pool_create(name,dev,size,align,allocation) \ + pci_pool_create((name),to_pci_dev(dev),(size),(align),(allocation)) +#endif /* < 2.6.3 */ + +/*****************************************************************************/ +/* 2.6.4 => 2.6.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) +#define MODULE_VERSION(_version) MODULE_INFO(version, _version) +#endif /* 2.6.4 => 2.6.0 */ + +/*****************************************************************************/ +/* 2.6.5 => 2.6.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) ) +#define dma_sync_single_for_cpu dma_sync_single +#define dma_sync_single_for_device dma_sync_single +#define dma_sync_single_range_for_cpu dma_sync_single_range +#define dma_sync_single_range_for_device dma_sync_single_range +#ifndef pci_dma_mapping_error +#define pci_dma_mapping_error _kc_pci_dma_mapping_error +static inline int _kc_pci_dma_mapping_error(dma_addr_t dma_addr) +{ + return dma_addr == 0; +} +#endif +#endif /* 2.6.5 => 2.6.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) +extern int _kc_scnprintf(char * buf, size_t size, const char *fmt, ...); +#define scnprintf(buf, size, fmt, args...) _kc_scnprintf(buf, size, fmt, ##args) +#endif /* < 2.6.4 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,6) ) +/* taken from 2.6 include/linux/bitmap.h */ +#undef bitmap_zero +#define bitmap_zero _kc_bitmap_zero +static inline void _kc_bitmap_zero(unsigned long *dst, int nbits) +{ + if (nbits <= BITS_PER_LONG) + *dst = 0UL; + else { + int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long); + memset(dst, 0, len); + } +} +#define random_ether_addr _kc_random_ether_addr +static inline void _kc_random_ether_addr(u8 *addr) +{ + get_random_bytes(addr, ETH_ALEN); + addr[0] &= 0xfe; /* clear multicast */ + addr[0] |= 0x02; /* set local assignment */ +} +#define page_to_nid(x) 0 + +#endif /* < 2.6.6 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,7) ) +#undef if_mii +#define if_mii _kc_if_mii +static inline struct mii_ioctl_data *_kc_if_mii(struct ifreq *rq) +{ + return (struct mii_ioctl_data *) &rq->ifr_ifru; +} + +#ifndef __force +#define __force +#endif +#endif /* < 2.6.7 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) ) +#ifndef PCI_EXP_DEVCTL +#define PCI_EXP_DEVCTL 8 +#endif +#ifndef PCI_EXP_DEVCTL_CERE +#define PCI_EXP_DEVCTL_CERE 0x0001 +#endif +#define PCI_EXP_FLAGS 2 /* Capabilities register */ +#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ +#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ +#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ +#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ +#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ +#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ +#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ +#define PCI_EXP_DEVCAP 4 /* Device capabilities */ +#define PCI_EXP_DEVSTA 10 /* Device Status */ +#define msleep(x) do { set_current_state(TASK_UNINTERRUPTIBLE); \ + schedule_timeout((x * HZ)/1000 + 2); \ + } while (0) + +#endif /* < 2.6.8 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9)) +#include <net/dsfield.h> +#define __iomem + +#ifndef kcalloc +#define kcalloc(n, size, flags) _kc_kzalloc(((n) * (size)), flags) +extern void *_kc_kzalloc(size_t size, int flags); +#endif +#define MSEC_PER_SEC 1000L +static inline unsigned int _kc_jiffies_to_msecs(const unsigned long j) +{ +#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ) + return (MSEC_PER_SEC / HZ) * j; +#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC) + return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC); +#else + return (j * MSEC_PER_SEC) / HZ; +#endif +} +static inline unsigned long _kc_msecs_to_jiffies(const unsigned int m) +{ + if (m > _kc_jiffies_to_msecs(MAX_JIFFY_OFFSET)) + return MAX_JIFFY_OFFSET; +#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ) + return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ); +#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC) + return m * (HZ / MSEC_PER_SEC); +#else + return (m * HZ + MSEC_PER_SEC - 1) / MSEC_PER_SEC; +#endif +} + +#define msleep_interruptible _kc_msleep_interruptible +static inline unsigned long _kc_msleep_interruptible(unsigned int msecs) +{ + unsigned long timeout = _kc_msecs_to_jiffies(msecs) + 1; + + while (timeout && !signal_pending(current)) { + __set_current_state(TASK_INTERRUPTIBLE); + timeout = schedule_timeout(timeout); + } + return _kc_jiffies_to_msecs(timeout); +} + +/* Basic mode control register. */ +#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ + +#ifndef __le16 +#define __le16 u16 +#endif +#ifndef __le32 +#define __le32 u32 +#endif +#ifndef __le64 +#define __le64 u64 +#endif +#ifndef __be16 +#define __be16 u16 +#endif +#ifndef __be32 +#define __be32 u32 +#endif +#ifndef __be64 +#define __be64 u64 +#endif + +static inline struct vlan_ethhdr *vlan_eth_hdr(const struct sk_buff *skb) +{ + return (struct vlan_ethhdr *)skb->mac.raw; +} + +/* Wake-On-Lan options. */ +#define WAKE_PHY (1 << 0) +#define WAKE_UCAST (1 << 1) +#define WAKE_MCAST (1 << 2) +#define WAKE_BCAST (1 << 3) +#define WAKE_ARP (1 << 4) +#define WAKE_MAGIC (1 << 5) +#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ + +#define skb_header_pointer _kc_skb_header_pointer +static inline void *_kc_skb_header_pointer(const struct sk_buff *skb, + int offset, int len, void *buffer) +{ + int hlen = skb_headlen(skb); + + if (hlen - offset >= len) + return skb->data + offset; + +#ifdef MAX_SKB_FRAGS + if (skb_copy_bits(skb, offset, buffer, len) < 0) + return NULL; + + return buffer; +#else + return NULL; +#endif + +#ifndef NETDEV_TX_OK +#define NETDEV_TX_OK 0 +#endif +#ifndef NETDEV_TX_BUSY +#define NETDEV_TX_BUSY 1 +#endif +#ifndef NETDEV_TX_LOCKED +#define NETDEV_TX_LOCKED -1 +#endif +} + +#ifndef __bitwise +#define __bitwise +#endif +#endif /* < 2.6.9 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) +#ifdef module_param_array_named +#undef module_param_array_named +#define module_param_array_named(name, array, type, nump, perm) \ + static struct kparam_array __param_arr_##name \ + = { ARRAY_SIZE(array), nump, param_set_##type, param_get_##type, \ + sizeof(array[0]), array }; \ + module_param_call(name, param_array_set, param_array_get, \ + &__param_arr_##name, perm) +#endif /* module_param_array_named */ +/* + * num_online is broken for all < 2.6.10 kernels. This is needed to support + * Node module parameter of ixgbe. + */ +#undef num_online_nodes +#define num_online_nodes(n) 1 +extern DECLARE_BITMAP(_kcompat_node_online_map, MAX_NUMNODES); +#undef node_online_map +#define node_online_map _kcompat_node_online_map +#define pci_get_class pci_find_class +#endif /* < 2.6.10 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) ) +#define PCI_D0 0 +#define PCI_D1 1 +#define PCI_D2 2 +#define PCI_D3hot 3 +#define PCI_D3cold 4 +typedef int pci_power_t; +#define pci_choose_state(pdev,state) state +#define PMSG_SUSPEND 3 +#define PCI_EXP_LNKCTL 16 + +#undef NETIF_F_LLTX + +#ifndef ARCH_HAS_PREFETCH +#define prefetch(X) +#endif + +#ifndef NET_IP_ALIGN +#define NET_IP_ALIGN 2 +#endif + +#define KC_USEC_PER_SEC 1000000L +#define usecs_to_jiffies _kc_usecs_to_jiffies +static inline unsigned int _kc_jiffies_to_usecs(const unsigned long j) +{ +#if HZ <= KC_USEC_PER_SEC && !(KC_USEC_PER_SEC % HZ) + return (KC_USEC_PER_SEC / HZ) * j; +#elif HZ > KC_USEC_PER_SEC && !(HZ % KC_USEC_PER_SEC) + return (j + (HZ / KC_USEC_PER_SEC) - 1)/(HZ / KC_USEC_PER_SEC); +#else + return (j * KC_USEC_PER_SEC) / HZ; +#endif +} +static inline unsigned long _kc_usecs_to_jiffies(const unsigned int m) +{ + if (m > _kc_jiffies_to_usecs(MAX_JIFFY_OFFSET)) + return MAX_JIFFY_OFFSET; +#if HZ <= KC_USEC_PER_SEC && !(KC_USEC_PER_SEC % HZ) + return (m + (KC_USEC_PER_SEC / HZ) - 1) / (KC_USEC_PER_SEC / HZ); +#elif HZ > KC_USEC_PER_SEC && !(HZ % KC_USEC_PER_SEC) + return m * (HZ / KC_USEC_PER_SEC); +#else + return (m * HZ + KC_USEC_PER_SEC - 1) / KC_USEC_PER_SEC; +#endif +} + +#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ +#define PCI_EXP_LNKSTA 18 /* Link Status */ +#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ +#define PCI_EXP_SLTCTL 24 /* Slot Control */ +#define PCI_EXP_SLTSTA 26 /* Slot Status */ +#define PCI_EXP_RTCTL 28 /* Root Control */ +#define PCI_EXP_RTCAP 30 /* Root Capabilities */ +#define PCI_EXP_RTSTA 32 /* Root Status */ +#endif /* < 2.6.11 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,12) ) +#include <linux/reboot.h> +#define USE_REBOOT_NOTIFIER + +/* Generic MII registers. */ +#define MII_CTRL1000 0x09 /* 1000BASE-T control */ +#define MII_STAT1000 0x0a /* 1000BASE-T status */ +/* Advertisement control register. */ +#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ +#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymmetric pause */ +/* Link partner ability register. */ +#define LPA_PAUSE_CAP 0x0400 /* Can pause */ +#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ +/* 1000BASE-T Control register */ +#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ +#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ +/* 1000BASE-T Status register */ +#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ +#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ + +#ifndef is_zero_ether_addr +#define is_zero_ether_addr _kc_is_zero_ether_addr +static inline int _kc_is_zero_ether_addr(const u8 *addr) +{ + return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]); +} +#endif /* is_zero_ether_addr */ +#ifndef is_multicast_ether_addr +#define is_multicast_ether_addr _kc_is_multicast_ether_addr +static inline int _kc_is_multicast_ether_addr(const u8 *addr) +{ + return addr[0] & 0x01; +} +#endif /* is_multicast_ether_addr */ +#endif /* < 2.6.12 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) ) +#ifndef kstrdup +#define kstrdup _kc_kstrdup +extern char *_kc_kstrdup(const char *s, unsigned int gfp); +#endif +#endif /* < 2.6.13 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) ) +#define pm_message_t u32 +#ifndef kzalloc +#define kzalloc _kc_kzalloc +extern void *_kc_kzalloc(size_t size, int flags); +#endif + +/* Generic MII registers. */ +#define MII_ESTATUS 0x0f /* Extended Status */ +/* Basic mode status register. */ +#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ +/* Extended status register. */ +#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ +#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ + +#define SUPPORTED_Pause (1 << 13) +#define SUPPORTED_Asym_Pause (1 << 14) +#define ADVERTISED_Pause (1 << 13) +#define ADVERTISED_Asym_Pause (1 << 14) + +#if (!(RHEL_RELEASE_CODE && \ + (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,3)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0)))) +#if ((LINUX_VERSION_CODE == KERNEL_VERSION(2,6,9)) && !defined(gfp_t)) +#define gfp_t unsigned +#else +typedef unsigned gfp_t; +#endif +#endif /* !RHEL4.3->RHEL5.0 */ + +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,9) ) +#ifdef CONFIG_X86_64 +#define dma_sync_single_range_for_cpu(dev, addr, off, sz, dir) \ + dma_sync_single_for_cpu((dev), (addr), (off) + (sz), (dir)) +#define dma_sync_single_range_for_device(dev, addr, off, sz, dir) \ + dma_sync_single_for_device((dev), (addr), (off) + (sz), (dir)) +#endif +#endif +#endif /* < 2.6.14 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15) ) +#ifndef vmalloc_node +#define vmalloc_node(a,b) vmalloc(a) +#endif /* vmalloc_node*/ + +#define setup_timer(_timer, _function, _data) \ +do { \ + (_timer)->function = _function; \ + (_timer)->data = _data; \ + init_timer(_timer); \ +} while (0) +#ifndef device_can_wakeup +#define device_can_wakeup(dev) (1) +#endif +#ifndef device_set_wakeup_enable +#define device_set_wakeup_enable(dev, val) do{}while(0) +#endif +#ifndef device_init_wakeup +#define device_init_wakeup(dev,val) do {} while (0) +#endif +static inline unsigned _kc_compare_ether_addr(const u8 *addr1, const u8 *addr2) +{ + const u16 *a = (const u16 *) addr1; + const u16 *b = (const u16 *) addr2; + + return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0; +} +#undef compare_ether_addr +#define compare_ether_addr(addr1, addr2) _kc_compare_ether_addr(addr1, addr2) +#endif /* < 2.6.15 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16) ) +#undef DEFINE_MUTEX +#define DEFINE_MUTEX(x) DECLARE_MUTEX(x) +#define mutex_lock(x) down_interruptible(x) +#define mutex_unlock(x) up(x) + +#ifndef ____cacheline_internodealigned_in_smp +#ifdef CONFIG_SMP +#define ____cacheline_internodealigned_in_smp ____cacheline_aligned_in_smp +#else +#define ____cacheline_internodealigned_in_smp +#endif /* CONFIG_SMP */ +#endif /* ____cacheline_internodealigned_in_smp */ +#undef HAVE_PCI_ERS +#else /* 2.6.16 and above */ +#undef HAVE_PCI_ERS +#define HAVE_PCI_ERS +#if ( SLE_VERSION_CODE && SLE_VERSION_CODE == SLE_VERSION(10,4,0) ) +#ifdef device_can_wakeup +#undef device_can_wakeup +#endif /* device_can_wakeup */ +#define device_can_wakeup(dev) 1 +#endif /* SLE_VERSION(10,4,0) */ +#endif /* < 2.6.16 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17) ) +#ifndef dev_notice +#define dev_notice(dev, fmt, args...) \ + dev_printk(KERN_NOTICE, dev, fmt, ## args) +#endif + +#ifndef first_online_node +#define first_online_node 0 +#endif +#ifndef NET_SKB_PAD +#define NET_SKB_PAD 16 +#endif +#endif /* < 2.6.17 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ) + +#ifndef IRQ_HANDLED +#define irqreturn_t void +#define IRQ_HANDLED +#define IRQ_NONE +#endif + +#ifndef IRQF_PROBE_SHARED +#ifdef SA_PROBEIRQ +#define IRQF_PROBE_SHARED SA_PROBEIRQ +#else +#define IRQF_PROBE_SHARED 0 +#endif +#endif + +#ifndef IRQF_SHARED +#define IRQF_SHARED SA_SHIRQ +#endif + +#ifndef ARRAY_SIZE +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) +#endif + +#ifndef FIELD_SIZEOF +#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) +#endif + +#ifndef skb_is_gso +#ifdef NETIF_F_TSO +#define skb_is_gso _kc_skb_is_gso +static inline int _kc_skb_is_gso(const struct sk_buff *skb) +{ + return skb_shinfo(skb)->gso_size; +} +#else +#define skb_is_gso(a) 0 +#endif +#endif + +#ifndef resource_size_t +#define resource_size_t unsigned long +#endif + +#ifdef skb_pad +#undef skb_pad +#endif +#define skb_pad(x,y) _kc_skb_pad(x, y) +int _kc_skb_pad(struct sk_buff *skb, int pad); +#ifdef skb_padto +#undef skb_padto +#endif +#define skb_padto(x,y) _kc_skb_padto(x, y) +static inline int _kc_skb_padto(struct sk_buff *skb, unsigned int len) +{ + unsigned int size = skb->len; + if(likely(size >= len)) + return 0; + return _kc_skb_pad(skb, len - size); +} + +#ifndef DECLARE_PCI_UNMAP_ADDR +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + u32 LEN_NAME +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) +#endif /* DECLARE_PCI_UNMAP_ADDR */ +#endif /* < 2.6.18 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) ) + +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,0))) +#define i_private u.generic_ip +#endif /* >= RHEL 5.0 */ + +#ifndef DIV_ROUND_UP +#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) +#endif +#ifndef __ALIGN_MASK +#define __ALIGN_MASK(x, mask) (((x) + (mask)) & ~(mask)) +#endif +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ) +#if (!((RHEL_RELEASE_CODE && \ + ((RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,4) && \ + RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0)) || \ + (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,0)))))) +typedef irqreturn_t (*irq_handler_t)(int, void*, struct pt_regs *); +#endif +#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0)) +#undef CONFIG_INET_LRO +#undef CONFIG_INET_LRO_MODULE +#ifdef IXGBE_FCOE +#undef CONFIG_FCOE +#undef CONFIG_FCOE_MODULE +#endif /* IXGBE_FCOE */ +#endif +typedef irqreturn_t (*new_handler_t)(int, void*); +static inline irqreturn_t _kc_request_irq(unsigned int irq, new_handler_t handler, unsigned long flags, const char *devname, void *dev_id) +#else /* 2.4.x */ +typedef void (*irq_handler_t)(int, void*, struct pt_regs *); +typedef void (*new_handler_t)(int, void*); +static inline int _kc_request_irq(unsigned int irq, new_handler_t handler, unsigned long flags, const char *devname, void *dev_id) +#endif /* >= 2.5.x */ +{ + irq_handler_t new_handler = (irq_handler_t) handler; + return request_irq(irq, new_handler, flags, devname, dev_id); +} + +#undef request_irq +#define request_irq(irq, handler, flags, devname, dev_id) _kc_request_irq((irq), (handler), (flags), (devname), (dev_id)) + +#define irq_handler_t new_handler_t +/* pci_restore_state and pci_save_state handles MSI/PCIE from 2.6.19 */ +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4))) +#define PCIE_CONFIG_SPACE_LEN 256 +#define PCI_CONFIG_SPACE_LEN 64 +#define PCIE_LINK_STATUS 0x12 +#define pci_config_space_ich8lan() do {} while(0) +#undef pci_save_state +extern int _kc_pci_save_state(struct pci_dev *); +#define pci_save_state(pdev) _kc_pci_save_state(pdev) +#undef pci_restore_state +extern void _kc_pci_restore_state(struct pci_dev *); +#define pci_restore_state(pdev) _kc_pci_restore_state(pdev) +#endif /* !(RHEL_RELEASE_CODE >= RHEL 5.4) */ + +#ifdef HAVE_PCI_ERS +#undef free_netdev +extern void _kc_free_netdev(struct net_device *); +#define free_netdev(netdev) _kc_free_netdev(netdev) +#endif +static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev) +{ + return 0; +} +#define pci_disable_pcie_error_reporting(dev) do {} while (0) +#define pci_cleanup_aer_uncorrect_error_status(dev) do {} while (0) + +extern void *_kc_kmemdup(const void *src, size_t len, unsigned gfp); +#define kmemdup(src, len, gfp) _kc_kmemdup(src, len, gfp) +#ifndef bool +#define bool _Bool +#define true 1 +#define false 0 +#endif +#else /* 2.6.19 */ +#include <linux/aer.h> +#include <linux/string.h> +#endif /* < 2.6.19 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ) +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28) ) +#undef INIT_WORK +#define INIT_WORK(_work, _func) \ +do { \ + INIT_LIST_HEAD(&(_work)->entry); \ + (_work)->pending = 0; \ + (_work)->func = (void (*)(void *))_func; \ + (_work)->data = _work; \ + init_timer(&(_work)->timer); \ +} while (0) +#endif + +#ifndef PCI_VDEVICE +#define PCI_VDEVICE(ven, dev) \ + PCI_VENDOR_ID_##ven, (dev), \ + PCI_ANY_ID, PCI_ANY_ID, 0, 0 +#endif + +#ifndef PCI_VENDOR_ID_INTEL +#define PCI_VENDOR_ID_INTEL 0x8086 +#endif + +#ifndef round_jiffies +#define round_jiffies(x) x +#endif + +#define csum_offset csum + +#define HAVE_EARLY_VMALLOC_NODE +#define dev_to_node(dev) -1 +#undef set_dev_node +/* remove compiler warning with b=b, for unused variable */ +#define set_dev_node(a, b) do { (b) = (b); } while(0) + +#if (!(RHEL_RELEASE_CODE && \ + (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(4,7)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))) || \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,6)))) && \ + !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(10,2,0))) +typedef __u16 __bitwise __sum16; +typedef __u32 __bitwise __wsum; +#endif + +#if (!(RHEL_RELEASE_CODE && \ + (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(4,7)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))) || \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4)))) && \ + !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(10,2,0))) +static inline __wsum csum_unfold(__sum16 n) +{ + return (__force __wsum)n; +} +#endif + +#else /* < 2.6.20 */ +#define HAVE_DEVICE_NUMA_NODE +#endif /* < 2.6.20 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) ) +#define to_net_dev(class) container_of(class, struct net_device, class_dev) +#define NETDEV_CLASS_DEV +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5))) +#define vlan_group_get_device(vg, id) (vg->vlan_devices[id]) +#define vlan_group_set_device(vg, id, dev) \ + do { \ + if (vg) vg->vlan_devices[id] = dev; \ + } while (0) +#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5)) */ +#define pci_channel_offline(pdev) (pdev->error_state && \ + pdev->error_state != pci_channel_io_normal) +#define pci_request_selected_regions(pdev, bars, name) \ + pci_request_regions(pdev, name) +#define pci_release_selected_regions(pdev, bars) pci_release_regions(pdev); + +#ifndef __aligned +#define __aligned(x) __attribute__((aligned(x))) +#endif + +extern struct pci_dev *_kc_netdev_to_pdev(struct net_device *netdev); +#define netdev_to_dev(netdev) \ + pci_dev_to_dev(_kc_netdev_to_pdev(netdev)) +#else +static inline struct device *netdev_to_dev(struct net_device *netdev) +{ + return &netdev->dev; +} + +#endif /* < 2.6.21 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ) +#define tcp_hdr(skb) (skb->h.th) +#define tcp_hdrlen(skb) (skb->h.th->doff << 2) +#define skb_transport_offset(skb) (skb->h.raw - skb->data) +#define skb_transport_header(skb) (skb->h.raw) +#define ipv6_hdr(skb) (skb->nh.ipv6h) +#define ip_hdr(skb) (skb->nh.iph) +#define skb_network_offset(skb) (skb->nh.raw - skb->data) +#define skb_network_header(skb) (skb->nh.raw) +#define skb_tail_pointer(skb) skb->tail +#define skb_reset_tail_pointer(skb) \ + do { \ + skb->tail = skb->data; \ + } while (0) +#define skb_set_tail_pointer(skb, offset) \ + do { \ + skb->tail = skb->data + offset; \ + } while (0) +#define skb_copy_to_linear_data(skb, from, len) \ + memcpy(skb->data, from, len) +#define skb_copy_to_linear_data_offset(skb, offset, from, len) \ + memcpy(skb->data + offset, from, len) +#define skb_network_header_len(skb) (skb->h.raw - skb->nh.raw) +#define pci_register_driver pci_module_init +#define skb_mac_header(skb) skb->mac.raw + +#ifdef NETIF_F_MULTI_QUEUE +#ifndef alloc_etherdev_mq +#define alloc_etherdev_mq(_a, _b) alloc_etherdev(_a) +#endif +#endif /* NETIF_F_MULTI_QUEUE */ + +#ifndef ETH_FCS_LEN +#define ETH_FCS_LEN 4 +#endif +#define cancel_work_sync(x) flush_scheduled_work() +#ifndef udp_hdr +#define udp_hdr _udp_hdr +static inline struct udphdr *_udp_hdr(const struct sk_buff *skb) +{ + return (struct udphdr *)skb_transport_header(skb); +} +#endif + +#ifdef cpu_to_be16 +#undef cpu_to_be16 +#endif +#define cpu_to_be16(x) __constant_htons(x) + +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,1))) +enum { + DUMP_PREFIX_NONE, + DUMP_PREFIX_ADDRESS, + DUMP_PREFIX_OFFSET +}; +#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,1)) */ +#ifndef hex_asc +#define hex_asc(x) "0123456789abcdef"[x] +#endif +#include <linux/ctype.h> +extern void _kc_print_hex_dump(const char *level, const char *prefix_str, + int prefix_type, int rowsize, int groupsize, + const void *buf, size_t len, bool ascii); +#define print_hex_dump(lvl, s, t, r, g, b, l, a) \ + _kc_print_hex_dump(lvl, s, t, r, g, b, l, a) +#ifndef ADVERTISED_2500baseX_Full +#define ADVERTISED_2500baseX_Full (1 << 15) +#endif +#ifndef SUPPORTED_2500baseX_Full +#define SUPPORTED_2500baseX_Full (1 << 15) +#endif + +#ifdef HAVE_I2C_SUPPORT +#include <linux/i2c.h> +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5))) +struct i2c_board_info { + char driver_name[KOBJ_NAME_LEN]; + char type[I2C_NAME_SIZE]; + unsigned short flags; + unsigned short addr; + void *platform_data; +}; +#define I2C_BOARD_INFO(driver, dev_addr) .driver_name = (driver),\ + .addr = (dev_addr) +#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5)) */ +#define i2c_new_device(adap, info) _kc_i2c_new_device(adap, info) +extern struct i2c_client * +_kc_i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info); +#endif /* HAVE_I2C_SUPPORT */ + +#else /* 2.6.22 */ +#define ETH_TYPE_TRANS_SETS_DEV +#define HAVE_NETDEV_STATS_IN_NETDEV +#endif /* < 2.6.22 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22) ) +#undef SET_MODULE_OWNER +#define SET_MODULE_OWNER(dev) do { } while (0) +#endif /* > 2.6.22 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) ) +#define netif_subqueue_stopped(_a, _b) 0 +#ifndef PTR_ALIGN +#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a))) +#endif + +#ifndef CONFIG_PM_SLEEP +#define CONFIG_PM_SLEEP CONFIG_PM +#endif + +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13) ) +#define HAVE_ETHTOOL_GET_PERM_ADDR +#endif /* 2.6.14 through 2.6.22 */ +#endif /* < 2.6.23 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ) +#ifndef ETH_FLAG_LRO +#define ETH_FLAG_LRO NETIF_F_LRO +#endif + +/* if GRO is supported then the napi struct must already exist */ +#ifndef NETIF_F_GRO +/* NAPI API changes in 2.6.24 break everything */ +struct napi_struct { + /* used to look up the real NAPI polling routine */ + int (*poll)(struct napi_struct *, int); + struct net_device *dev; + int weight; +}; +#endif + +#ifdef NAPI +extern int __kc_adapter_clean(struct net_device *, int *); +extern struct net_device *napi_to_poll_dev(const struct napi_struct *napi); +#define netif_napi_add(_netdev, _napi, _poll, _weight) \ + do { \ + struct napi_struct *__napi = (_napi); \ + struct net_device *poll_dev = napi_to_poll_dev(__napi); \ + poll_dev->poll = &(__kc_adapter_clean); \ + poll_dev->priv = (_napi); \ + poll_dev->weight = (_weight); \ + set_bit(__LINK_STATE_RX_SCHED, &poll_dev->state); \ + set_bit(__LINK_STATE_START, &poll_dev->state);\ + dev_hold(poll_dev); \ + __napi->poll = &(_poll); \ + __napi->weight = (_weight); \ + __napi->dev = (_netdev); \ + } while (0) +#define netif_napi_del(_napi) \ + do { \ + struct net_device *poll_dev = napi_to_poll_dev(_napi); \ + WARN_ON(!test_bit(__LINK_STATE_RX_SCHED, &poll_dev->state)); \ + dev_put(poll_dev); \ + memset(poll_dev, 0, sizeof(struct net_device));\ + } while (0) +#define napi_schedule_prep(_napi) \ + (netif_running((_napi)->dev) && netif_rx_schedule_prep(napi_to_poll_dev(_napi))) +#define napi_schedule(_napi) \ + do { \ + if (napi_schedule_prep(_napi)) \ + __netif_rx_schedule(napi_to_poll_dev(_napi)); \ + } while (0) +#define napi_enable(_napi) netif_poll_enable(napi_to_poll_dev(_napi)) +#define napi_disable(_napi) netif_poll_disable(napi_to_poll_dev(_napi)) +#ifdef CONFIG_SMP +static inline void napi_synchronize(const struct napi_struct *n) +{ + struct net_device *dev = napi_to_poll_dev(n); + + while (test_bit(__LINK_STATE_RX_SCHED, &dev->state)) { + /* No hurry. */ + msleep(1); + } +} +#else +#define napi_synchronize(n) barrier() +#endif /* CONFIG_SMP */ +#define __napi_schedule(_napi) __netif_rx_schedule(napi_to_poll_dev(_napi)) +#ifndef NETIF_F_GRO +#define napi_complete(_napi) netif_rx_complete(napi_to_poll_dev(_napi)) +#else +#define napi_complete(_napi) \ + do { \ + napi_gro_flush(_napi); \ + netif_rx_complete(napi_to_poll_dev(_napi)); \ + } while (0) +#endif /* NETIF_F_GRO */ +#else /* NAPI */ +#define netif_napi_add(_netdev, _napi, _poll, _weight) \ + do { \ + struct napi_struct *__napi = _napi; \ + _netdev->poll = &(_poll); \ + _netdev->weight = (_weight); \ + __napi->poll = &(_poll); \ + __napi->weight = (_weight); \ + __napi->dev = (_netdev); \ + } while (0) +#define netif_napi_del(_a) do {} while (0) +#endif /* NAPI */ + +#undef dev_get_by_name +#define dev_get_by_name(_a, _b) dev_get_by_name(_b) +#define __netif_subqueue_stopped(_a, _b) netif_subqueue_stopped(_a, _b) +#ifndef DMA_BIT_MASK +#define DMA_BIT_MASK(n) (((n) == 64) ? DMA_64BIT_MASK : ((1ULL<<(n))-1)) +#endif + +#ifdef NETIF_F_TSO6 +#define skb_is_gso_v6 _kc_skb_is_gso_v6 +static inline int _kc_skb_is_gso_v6(const struct sk_buff *skb) +{ + return skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6; +} +#endif /* NETIF_F_TSO6 */ + +#ifndef KERN_CONT +#define KERN_CONT "" +#endif +#ifndef pr_err +#define pr_err(fmt, arg...) \ + printk(KERN_ERR fmt, ##arg) +#endif +#else /* < 2.6.24 */ +#define HAVE_ETHTOOL_GET_SSET_COUNT +#define HAVE_NETDEV_NAPI_LIST +#endif /* < 2.6.24 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,24) ) +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) ) +#include <linux/pm_qos_params.h> +#else /* >= 3.2.0 */ +#include <linux/pm_qos.h> +#endif /* else >= 3.2.0 */ +#endif /* > 2.6.24 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25) ) +#define PM_QOS_CPU_DMA_LATENCY 1 + +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18) ) +#include <linux/latency.h> +#define PM_QOS_DEFAULT_VALUE INFINITE_LATENCY +#define pm_qos_add_requirement(pm_qos_class, name, value) \ + set_acceptable_latency(name, value) +#define pm_qos_remove_requirement(pm_qos_class, name) \ + remove_acceptable_latency(name) +#define pm_qos_update_requirement(pm_qos_class, name, value) \ + modify_acceptable_latency(name, value) +#else +#define PM_QOS_DEFAULT_VALUE -1 +#define pm_qos_add_requirement(pm_qos_class, name, value) +#define pm_qos_remove_requirement(pm_qos_class, name) +#define pm_qos_update_requirement(pm_qos_class, name, value) { \ + if (value != PM_QOS_DEFAULT_VALUE) { \ + printk(KERN_WARNING "%s: unable to set PM QoS requirement\n", \ + pci_name(adapter->pdev)); \ + } \ +} + +#endif /* > 2.6.18 */ + +#define pci_enable_device_mem(pdev) pci_enable_device(pdev) + +#ifndef DEFINE_PCI_DEVICE_TABLE +#define DEFINE_PCI_DEVICE_TABLE(_table) struct pci_device_id _table[] +#endif /* DEFINE_PCI_DEVICE_TABLE */ + + +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) +#ifndef IGB_PROCFS +#define IGB_PROCFS +#endif /* IGB_PROCFS */ +#endif /* >= 2.6.0 */ + +#else /* < 2.6.25 */ + + +#if IS_ENABLED(CONFIG_HWMON) +#ifndef IGB_HWMON +#define IGB_HWMON +#endif /* IGB_HWMON */ +#endif /* CONFIG_HWMON */ + +#endif /* < 2.6.25 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) ) +#ifndef clamp_t +#define clamp_t(type, val, min, max) ({ \ + type __val = (val); \ + type __min = (min); \ + type __max = (max); \ + __val = __val < __min ? __min : __val; \ + __val > __max ? __max : __val; }) +#endif /* clamp_t */ +#undef kzalloc_node +#define kzalloc_node(_size, _flags, _node) kzalloc(_size, _flags) + +extern void _kc_pci_disable_link_state(struct pci_dev *dev, int state); +#define pci_disable_link_state(p, s) _kc_pci_disable_link_state(p, s) +#else /* < 2.6.26 */ +#include <linux/pci-aspm.h> +#define HAVE_NETDEV_VLAN_FEATURES +#ifndef PCI_EXP_LNKCAP_ASPMS +#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ +#endif /* PCI_EXP_LNKCAP_ASPMS */ +#endif /* < 2.6.26 */ +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27) ) +static inline void _kc_ethtool_cmd_speed_set(struct ethtool_cmd *ep, + __u32 speed) +{ + ep->speed = (__u16)speed; + /* ep->speed_hi = (__u16)(speed >> 16); */ +} +#define ethtool_cmd_speed_set _kc_ethtool_cmd_speed_set + +static inline __u32 _kc_ethtool_cmd_speed(struct ethtool_cmd *ep) +{ + /* no speed_hi before 2.6.27, and probably no need for it yet */ + return (__u32)ep->speed; +} +#define ethtool_cmd_speed _kc_ethtool_cmd_speed + +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15) ) +#if ((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)) && defined(CONFIG_PM)) +#define ANCIENT_PM 1 +#elif ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) && \ + (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) && \ + defined(CONFIG_PM_SLEEP)) +#define NEWER_PM 1 +#endif +#if defined(ANCIENT_PM) || defined(NEWER_PM) +#undef device_set_wakeup_enable +#define device_set_wakeup_enable(dev, val) \ + do { \ + u16 pmc = 0; \ + int pm = pci_find_capability(adapter->pdev, PCI_CAP_ID_PM); \ + if (pm) { \ + pci_read_config_word(adapter->pdev, pm + PCI_PM_PMC, \ + &pmc); \ + } \ + (dev)->power.can_wakeup = !!(pmc >> 11); \ + (dev)->power.should_wakeup = (val && (pmc >> 11)); \ + } while (0) +#endif /* 2.6.15-2.6.22 and CONFIG_PM or 2.6.23-2.6.25 and CONFIG_PM_SLEEP */ +#endif /* 2.6.15 through 2.6.27 */ +#ifndef netif_napi_del +#define netif_napi_del(_a) do {} while (0) +#ifdef NAPI +#ifdef CONFIG_NETPOLL +#undef netif_napi_del +#define netif_napi_del(_a) list_del(&(_a)->dev_list); +#endif +#endif +#endif /* netif_napi_del */ +#ifdef dma_mapping_error +#undef dma_mapping_error +#endif +#define dma_mapping_error(dev, dma_addr) pci_dma_mapping_error(dma_addr) + +#ifdef CONFIG_NETDEVICES_MULTIQUEUE +#define HAVE_TX_MQ +#endif + +#ifdef HAVE_TX_MQ +extern void _kc_netif_tx_stop_all_queues(struct net_device *); +extern void _kc_netif_tx_wake_all_queues(struct net_device *); +extern void _kc_netif_tx_start_all_queues(struct net_device *); +#define netif_tx_stop_all_queues(a) _kc_netif_tx_stop_all_queues(a) +#define netif_tx_wake_all_queues(a) _kc_netif_tx_wake_all_queues(a) +#define netif_tx_start_all_queues(a) _kc_netif_tx_start_all_queues(a) +#undef netif_stop_subqueue +#define netif_stop_subqueue(_ndev,_qi) do { \ + if (netif_is_multiqueue((_ndev))) \ + netif_stop_subqueue((_ndev), (_qi)); \ + else \ + netif_stop_queue((_ndev)); \ + } while (0) +#undef netif_start_subqueue +#define netif_start_subqueue(_ndev,_qi) do { \ + if (netif_is_multiqueue((_ndev))) \ + netif_start_subqueue((_ndev), (_qi)); \ + else \ + netif_start_queue((_ndev)); \ + } while (0) +#else /* HAVE_TX_MQ */ +#define netif_tx_stop_all_queues(a) netif_stop_queue(a) +#define netif_tx_wake_all_queues(a) netif_wake_queue(a) +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12) ) +#define netif_tx_start_all_queues(a) netif_start_queue(a) +#else +#define netif_tx_start_all_queues(a) do {} while (0) +#endif +#define netif_stop_subqueue(_ndev,_qi) netif_stop_queue((_ndev)) +#define netif_start_subqueue(_ndev,_qi) netif_start_queue((_ndev)) +#endif /* HAVE_TX_MQ */ +#ifndef NETIF_F_MULTI_QUEUE +#define NETIF_F_MULTI_QUEUE 0 +#define netif_is_multiqueue(a) 0 +#define netif_wake_subqueue(a, b) +#endif /* NETIF_F_MULTI_QUEUE */ + +#ifndef __WARN_printf +extern void __kc_warn_slowpath(const char *file, const int line, + const char *fmt, ...) __attribute__((format(printf, 3, 4))); +#define __WARN_printf(arg...) __kc_warn_slowpath(__FILE__, __LINE__, arg) +#endif /* __WARN_printf */ + +#ifndef WARN +#define WARN(condition, format...) ({ \ + int __ret_warn_on = !!(condition); \ + if (unlikely(__ret_warn_on)) \ + __WARN_printf(format); \ + unlikely(__ret_warn_on); \ +}) +#endif /* WARN */ +#undef HAVE_IXGBE_DEBUG_FS +#undef HAVE_IGB_DEBUG_FS +#else /* < 2.6.27 */ +#define HAVE_TX_MQ +#define HAVE_NETDEV_SELECT_QUEUE +#ifdef CONFIG_DEBUG_FS +#define HAVE_IXGBE_DEBUG_FS +#define HAVE_IGB_DEBUG_FS +#endif /* CONFIG_DEBUG_FS */ +#endif /* < 2.6.27 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ) +#define pci_ioremap_bar(pdev, bar) ioremap(pci_resource_start(pdev, bar), \ + pci_resource_len(pdev, bar)) +#define pci_wake_from_d3 _kc_pci_wake_from_d3 +#define pci_prepare_to_sleep _kc_pci_prepare_to_sleep +extern int _kc_pci_wake_from_d3(struct pci_dev *dev, bool enable); +extern int _kc_pci_prepare_to_sleep(struct pci_dev *dev); +#define netdev_alloc_page(a) alloc_page(GFP_ATOMIC) +#ifndef __skb_queue_head_init +static inline void __kc_skb_queue_head_init(struct sk_buff_head *list) +{ + list->prev = list->next = (struct sk_buff *)list; + list->qlen = 0; +} +#define __skb_queue_head_init(_q) __kc_skb_queue_head_init(_q) +#endif + +#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ +#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ + +#endif /* < 2.6.28 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29) ) +#ifndef swap +#define swap(a, b) \ + do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0) +#endif +#define pci_request_selected_regions_exclusive(pdev, bars, name) \ + pci_request_selected_regions(pdev, bars, name) +#ifndef CONFIG_NR_CPUS +#define CONFIG_NR_CPUS 1 +#endif /* CONFIG_NR_CPUS */ +#ifndef pcie_aspm_enabled +#define pcie_aspm_enabled() (1) +#endif /* pcie_aspm_enabled */ + +#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */ + +#ifndef pci_clear_master +extern void _kc_pci_clear_master(struct pci_dev *dev); +#define pci_clear_master(dev) _kc_pci_clear_master(dev) +#endif + +#ifndef PCI_EXP_LNKCTL_ASPMC +#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ +#endif +#else /* < 2.6.29 */ +#ifndef HAVE_NET_DEVICE_OPS +#define HAVE_NET_DEVICE_OPS +#endif +#ifdef CONFIG_DCB +#define HAVE_PFC_MODE_ENABLE +#endif /* CONFIG_DCB */ +#endif /* < 2.6.29 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ) +#define skb_rx_queue_recorded(a) false +#define skb_get_rx_queue(a) 0 +#define skb_record_rx_queue(a, b) do {} while (0) +#define skb_tx_hash(n, s) ___kc_skb_tx_hash((n), (s), (n)->real_num_tx_queues) +#ifndef CONFIG_PCI_IOV +#undef pci_enable_sriov +#define pci_enable_sriov(a, b) -ENOTSUPP +#undef pci_disable_sriov +#define pci_disable_sriov(a) do {} while (0) +#endif /* CONFIG_PCI_IOV */ +#ifndef pr_cont +#define pr_cont(fmt, ...) \ + printk(KERN_CONT fmt, ##__VA_ARGS__) +#endif /* pr_cont */ +static inline void _kc_synchronize_irq(unsigned int a) +{ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28) ) + synchronize_irq(); +#else /* < 2.5.28 */ + synchronize_irq(a); +#endif /* < 2.5.28 */ +} +#undef synchronize_irq +#define synchronize_irq(a) _kc_synchronize_irq(a) + +#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ + +#else /* < 2.6.30 */ +#define HAVE_ASPM_QUIRKS +#endif /* < 2.6.30 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31) ) +#define ETH_P_1588 0x88F7 +#define ETH_P_FIP 0x8914 +#ifndef netdev_uc_count +#define netdev_uc_count(dev) ((dev)->uc_count) +#endif +#ifndef netdev_for_each_uc_addr +#define netdev_for_each_uc_addr(uclist, dev) \ + for (uclist = dev->uc_list; uclist; uclist = uclist->next) +#endif +#ifndef PORT_OTHER +#define PORT_OTHER 0xff +#endif +#ifndef MDIO_PHY_ID_PRTAD +#define MDIO_PHY_ID_PRTAD 0x03e0 +#endif +#ifndef MDIO_PHY_ID_DEVAD +#define MDIO_PHY_ID_DEVAD 0x001f +#endif +#ifndef skb_dst +#define skb_dst(s) ((s)->dst) +#endif + +#ifndef SUPPORTED_1000baseKX_Full +#define SUPPORTED_1000baseKX_Full (1 << 17) +#endif +#ifndef SUPPORTED_10000baseKX4_Full +#define SUPPORTED_10000baseKX4_Full (1 << 18) +#endif +#ifndef SUPPORTED_10000baseKR_Full +#define SUPPORTED_10000baseKR_Full (1 << 19) +#endif + +#ifndef ADVERTISED_1000baseKX_Full +#define ADVERTISED_1000baseKX_Full (1 << 17) +#endif +#ifndef ADVERTISED_10000baseKX4_Full +#define ADVERTISED_10000baseKX4_Full (1 << 18) +#endif +#ifndef ADVERTISED_10000baseKR_Full +#define ADVERTISED_10000baseKR_Full (1 << 19) +#endif + +#else /* < 2.6.31 */ +#ifndef HAVE_NETDEV_STORAGE_ADDRESS +#define HAVE_NETDEV_STORAGE_ADDRESS +#endif +#ifndef HAVE_NETDEV_HW_ADDR +#define HAVE_NETDEV_HW_ADDR +#endif +#ifndef HAVE_TRANS_START_IN_QUEUE +#define HAVE_TRANS_START_IN_QUEUE +#endif +#ifndef HAVE_INCLUDE_LINUX_MDIO_H +#define HAVE_INCLUDE_LINUX_MDIO_H +#endif +#endif /* < 2.6.31 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32) ) +#undef netdev_tx_t +#define netdev_tx_t int +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef NETIF_F_FCOE_MTU +#define NETIF_F_FCOE_MTU (1 << 26) +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) +static inline int _kc_pm_runtime_get_sync() +{ + return 1; +} +#define pm_runtime_get_sync(dev) _kc_pm_runtime_get_sync() +#else /* 2.6.0 => 2.6.32 */ +static inline int _kc_pm_runtime_get_sync(struct device *dev) +{ + return 1; +} +#ifndef pm_runtime_get_sync +#define pm_runtime_get_sync(dev) _kc_pm_runtime_get_sync(dev) +#endif +#endif /* 2.6.0 => 2.6.32 */ +#ifndef pm_runtime_put +#define pm_runtime_put(dev) do {} while (0) +#endif +#ifndef pm_runtime_put_sync +#define pm_runtime_put_sync(dev) do {} while (0) +#endif +#ifndef pm_runtime_resume +#define pm_runtime_resume(dev) do {} while (0) +#endif +#ifndef pm_schedule_suspend +#define pm_schedule_suspend(dev, t) do {} while (0) +#endif +#ifndef pm_runtime_set_suspended +#define pm_runtime_set_suspended(dev) do {} while (0) +#endif +#ifndef pm_runtime_disable +#define pm_runtime_disable(dev) do {} while (0) +#endif +#ifndef pm_runtime_put_noidle +#define pm_runtime_put_noidle(dev) do {} while (0) +#endif +#ifndef pm_runtime_set_active +#define pm_runtime_set_active(dev) do {} while (0) +#endif +#ifndef pm_runtime_enable +#define pm_runtime_enable(dev) do {} while (0) +#endif +#ifndef pm_runtime_get_noresume +#define pm_runtime_get_noresume(dev) do {} while (0) +#endif +#else /* < 2.6.32 */ +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef HAVE_NETDEV_OPS_FCOE_ENABLE +#define HAVE_NETDEV_OPS_FCOE_ENABLE +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ +#ifdef CONFIG_DCB +#ifndef HAVE_DCBNL_OPS_GETAPP +#define HAVE_DCBNL_OPS_GETAPP +#endif +#endif /* CONFIG_DCB */ +#include <linux/pm_runtime.h> +/* IOV bad DMA target work arounds require at least this kernel rev support */ +#define HAVE_PCIE_TYPE +#endif /* < 2.6.32 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33) ) +#ifndef pci_pcie_cap +#define pci_pcie_cap(pdev) pci_find_capability(pdev, PCI_CAP_ID_EXP) +#endif +#ifndef IPV4_FLOW +#define IPV4_FLOW 0x10 +#endif /* IPV4_FLOW */ +#ifndef IPV6_FLOW +#define IPV6_FLOW 0x11 +#endif /* IPV6_FLOW */ +/* Features back-ported to RHEL6 or SLES11 SP1 after 2.6.32 */ +#if ( (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0)) || \ + (SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,1,0)) ) +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef HAVE_NETDEV_OPS_FCOE_GETWWN +#define HAVE_NETDEV_OPS_FCOE_GETWWN +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ +#endif /* RHEL6 or SLES11 SP1 */ +#ifndef __percpu +#define __percpu +#endif /* __percpu */ +#ifndef PORT_DA +#define PORT_DA PORT_OTHER +#endif +#ifndef PORT_NONE +#define PORT_NONE PORT_OTHER +#endif + +#if ((RHEL_RELEASE_CODE && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,3)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0)))) +#if !defined(CONFIG_X86_32) && !defined(CONFIG_NEED_DMA_MAP_STATE) +#undef DEFINE_DMA_UNMAP_ADDR +#define DEFINE_DMA_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME +#undef DEFINE_DMA_UNMAP_LEN +#define DEFINE_DMA_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME +#undef dma_unmap_addr +#define dma_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME) +#undef dma_unmap_addr_set +#define dma_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL)) +#undef dma_unmap_len +#define dma_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME) +#undef dma_unmap_len_set +#define dma_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL)) +#endif /* CONFIG_X86_64 && !CONFIG_NEED_DMA_MAP_STATE */ +#endif /* RHEL_RELEASE_CODE */ + +#if (!(RHEL_RELEASE_CODE && \ + (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,8)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0))) || \ + ((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,1)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0)))))) +static inline bool pci_is_pcie(struct pci_dev *dev) +{ + return !!pci_pcie_cap(dev); +} +#endif /* RHEL_RELEASE_CODE */ + +#ifndef __always_unused +#define __always_unused __attribute__((__unused__)) +#endif +#ifndef __maybe_unused +#define __maybe_unused __attribute__((__unused__)) +#endif + +#if (!(RHEL_RELEASE_CODE && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,2)))) +#define sk_tx_queue_get(_sk) (-1) +#define sk_tx_queue_set(_sk, _tx_queue) do {} while(0) +#endif /* !(RHEL >= 6.2) */ + +#if (RHEL_RELEASE_CODE && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,4)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0))) +#define HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT +#define HAVE_ETHTOOL_SET_PHYS_ID +#define HAVE_ETHTOOL_GET_TS_INFO +#endif /* RHEL >= 6.4 && RHEL < 7.0 */ + +#if (RHEL_RELEASE_CODE && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,5)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0))) +#define HAVE_RHEL6_NETDEV_OPS_EXT_FDB +#endif /* RHEL >= 6.5 && RHEL < 7.0 */ + +#else /* < 2.6.33 */ +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef HAVE_NETDEV_OPS_FCOE_GETWWN +#define HAVE_NETDEV_OPS_FCOE_GETWWN +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ +#endif /* < 2.6.33 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34) ) +#if (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0)) +#ifndef pci_num_vf +#define pci_num_vf(pdev) _kc_pci_num_vf(pdev) +extern int _kc_pci_num_vf(struct pci_dev *dev); +#endif +#endif /* RHEL_RELEASE_CODE */ + +#ifndef ETH_FLAG_NTUPLE +#define ETH_FLAG_NTUPLE NETIF_F_NTUPLE +#endif + +#ifndef netdev_mc_count +#define netdev_mc_count(dev) ((dev)->mc_count) +#endif +#ifndef netdev_mc_empty +#define netdev_mc_empty(dev) (netdev_mc_count(dev) == 0) +#endif +#ifndef netdev_for_each_mc_addr +#define netdev_for_each_mc_addr(mclist, dev) \ + for (mclist = dev->mc_list; mclist; mclist = mclist->next) +#endif +#ifndef netdev_uc_count +#define netdev_uc_count(dev) ((dev)->uc.count) +#endif +#ifndef netdev_uc_empty +#define netdev_uc_empty(dev) (netdev_uc_count(dev) == 0) +#endif +#ifndef netdev_for_each_uc_addr +#define netdev_for_each_uc_addr(ha, dev) \ + list_for_each_entry(ha, &dev->uc.list, list) +#endif +#ifndef dma_set_coherent_mask +#define dma_set_coherent_mask(dev,mask) \ + pci_set_consistent_dma_mask(to_pci_dev(dev),(mask)) +#endif +#ifndef pci_dev_run_wake +#define pci_dev_run_wake(pdev) (0) +#endif + +/* netdev logging taken from include/linux/netdevice.h */ +#ifndef netdev_name +static inline const char *_kc_netdev_name(const struct net_device *dev) +{ + if (dev->reg_state != NETREG_REGISTERED) + return "(unregistered net_device)"; + return dev->name; +} +#define netdev_name(netdev) _kc_netdev_name(netdev) +#endif /* netdev_name */ + +#undef netdev_printk +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) +#define netdev_printk(level, netdev, format, args...) \ +do { \ + struct pci_dev *pdev = _kc_netdev_to_pdev(netdev); \ + printk(level "%s: " format, pci_name(pdev), ##args); \ +} while(0) +#elif ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) ) +#define netdev_printk(level, netdev, format, args...) \ +do { \ + struct pci_dev *pdev = _kc_netdev_to_pdev(netdev); \ + struct device *dev = pci_dev_to_dev(pdev); \ + dev_printk(level, dev, "%s: " format, \ + netdev_name(netdev), ##args); \ +} while(0) +#else /* 2.6.21 => 2.6.34 */ +#define netdev_printk(level, netdev, format, args...) \ + dev_printk(level, (netdev)->dev.parent, \ + "%s: " format, \ + netdev_name(netdev), ##args) +#endif /* <2.6.0 <2.6.21 <2.6.34 */ +#undef netdev_emerg +#define netdev_emerg(dev, format, args...) \ + netdev_printk(KERN_EMERG, dev, format, ##args) +#undef netdev_alert +#define netdev_alert(dev, format, args...) \ + netdev_printk(KERN_ALERT, dev, format, ##args) +#undef netdev_crit +#define netdev_crit(dev, format, args...) \ + netdev_printk(KERN_CRIT, dev, format, ##args) +#undef netdev_err +#define netdev_err(dev, format, args...) \ + netdev_printk(KERN_ERR, dev, format, ##args) +#undef netdev_warn +#define netdev_warn(dev, format, args...) \ + netdev_printk(KERN_WARNING, dev, format, ##args) +#undef netdev_notice +#define netdev_notice(dev, format, args...) \ + netdev_printk(KERN_NOTICE, dev, format, ##args) +#undef netdev_info +#define netdev_info(dev, format, args...) \ + netdev_printk(KERN_INFO, dev, format, ##args) +#undef netdev_dbg +#if defined(DEBUG) +#define netdev_dbg(__dev, format, args...) \ + netdev_printk(KERN_DEBUG, __dev, format, ##args) +#elif defined(CONFIG_DYNAMIC_DEBUG) +#define netdev_dbg(__dev, format, args...) \ +do { \ + dynamic_dev_dbg((__dev)->dev.parent, "%s: " format, \ + netdev_name(__dev), ##args); \ +} while (0) +#else /* DEBUG */ +#define netdev_dbg(__dev, format, args...) \ +({ \ + if (0) \ + netdev_printk(KERN_DEBUG, __dev, format, ##args); \ + 0; \ +}) +#endif /* DEBUG */ + +#undef netif_printk +#define netif_printk(priv, type, level, dev, fmt, args...) \ +do { \ + if (netif_msg_##type(priv)) \ + netdev_printk(level, (dev), fmt, ##args); \ +} while (0) + +#undef netif_emerg +#define netif_emerg(priv, type, dev, fmt, args...) \ + netif_level(emerg, priv, type, dev, fmt, ##args) +#undef netif_alert +#define netif_alert(priv, type, dev, fmt, args...) \ + netif_level(alert, priv, type, dev, fmt, ##args) +#undef netif_crit +#define netif_crit(priv, type, dev, fmt, args...) \ + netif_level(crit, priv, type, dev, fmt, ##args) +#undef netif_err +#define netif_err(priv, type, dev, fmt, args...) \ + netif_level(err, priv, type, dev, fmt, ##args) +#undef netif_warn +#define netif_warn(priv, type, dev, fmt, args...) \ + netif_level(warn, priv, type, dev, fmt, ##args) +#undef netif_notice +#define netif_notice(priv, type, dev, fmt, args...) \ + netif_level(notice, priv, type, dev, fmt, ##args) +#undef netif_info +#define netif_info(priv, type, dev, fmt, args...) \ + netif_level(info, priv, type, dev, fmt, ##args) +#undef netif_dbg +#define netif_dbg(priv, type, dev, fmt, args...) \ + netif_level(dbg, priv, type, dev, fmt, ##args) + +#ifdef SET_SYSTEM_SLEEP_PM_OPS +#define HAVE_SYSTEM_SLEEP_PM_OPS +#endif + +#ifndef for_each_set_bit +#define for_each_set_bit(bit, addr, size) \ + for ((bit) = find_first_bit((addr), (size)); \ + (bit) < (size); \ + (bit) = find_next_bit((addr), (size), (bit) + 1)) +#endif /* for_each_set_bit */ + +#ifndef DEFINE_DMA_UNMAP_ADDR +#define DEFINE_DMA_UNMAP_ADDR DECLARE_PCI_UNMAP_ADDR +#define DEFINE_DMA_UNMAP_LEN DECLARE_PCI_UNMAP_LEN +#define dma_unmap_addr pci_unmap_addr +#define dma_unmap_addr_set pci_unmap_addr_set +#define dma_unmap_len pci_unmap_len +#define dma_unmap_len_set pci_unmap_len_set +#endif /* DEFINE_DMA_UNMAP_ADDR */ + +#if (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,3)) +#ifdef IGB_HWMON +#ifdef CONFIG_DEBUG_LOCK_ALLOC +#define sysfs_attr_init(attr) \ + do { \ + static struct lock_class_key __key; \ + (attr)->key = &__key; \ + } while (0) +#else +#define sysfs_attr_init(attr) do {} while (0) +#endif /* CONFIG_DEBUG_LOCK_ALLOC */ +#endif /* IGB_HWMON */ +#endif /* RHEL_RELEASE_CODE */ + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) +static inline bool _kc_pm_runtime_suspended() +{ + return false; +} +#define pm_runtime_suspended(dev) _kc_pm_runtime_suspended() +#else /* 2.6.0 => 2.6.34 */ +static inline bool _kc_pm_runtime_suspended(struct device *dev) +{ + return false; +} +#ifndef pm_runtime_suspended +#define pm_runtime_suspended(dev) _kc_pm_runtime_suspended(dev) +#endif +#endif /* 2.6.0 => 2.6.34 */ + +#else /* < 2.6.34 */ +#define HAVE_SYSTEM_SLEEP_PM_OPS +#ifndef HAVE_SET_RX_MODE +#define HAVE_SET_RX_MODE +#endif + +#endif /* < 2.6.34 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) ) + +ssize_t _kc_simple_write_to_buffer(void *to, size_t available, loff_t *ppos, + const void __user *from, size_t count); +#define simple_write_to_buffer _kc_simple_write_to_buffer + +#ifndef numa_node_id +#define numa_node_id() 0 +#endif +#ifdef HAVE_TX_MQ +#include <net/sch_generic.h> +#ifndef CONFIG_NETDEVICES_MULTIQUEUE +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0))) +void _kc_netif_set_real_num_tx_queues(struct net_device *, unsigned int); +#define netif_set_real_num_tx_queues _kc_netif_set_real_num_tx_queues +#endif /* !(RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0)) */ +#else /* CONFIG_NETDEVICES_MULTI_QUEUE */ +#define netif_set_real_num_tx_queues(_netdev, _count) \ + do { \ + (_netdev)->egress_subqueue_count = _count; \ + } while (0) +#endif /* CONFIG_NETDEVICES_MULTI_QUEUE */ +#else /* HAVE_TX_MQ */ +#define netif_set_real_num_tx_queues(_netdev, _count) do {} while(0) +#endif /* HAVE_TX_MQ */ +#ifndef ETH_FLAG_RXHASH +#define ETH_FLAG_RXHASH (1<<28) +#endif /* ETH_FLAG_RXHASH */ +#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0)) +#define HAVE_IRQ_AFFINITY_HINT +#endif +#else /* < 2.6.35 */ +#define HAVE_PM_QOS_REQUEST_LIST +#define HAVE_IRQ_AFFINITY_HINT +#endif /* < 2.6.35 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36) ) +extern int _kc_ethtool_op_set_flags(struct net_device *, u32, u32); +#define ethtool_op_set_flags _kc_ethtool_op_set_flags +extern u32 _kc_ethtool_op_get_flags(struct net_device *); +#define ethtool_op_get_flags _kc_ethtool_op_get_flags + +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +#ifdef NET_IP_ALIGN +#undef NET_IP_ALIGN +#endif +#define NET_IP_ALIGN 0 +#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */ + +#ifdef NET_SKB_PAD +#undef NET_SKB_PAD +#endif + +#if (L1_CACHE_BYTES > 32) +#define NET_SKB_PAD L1_CACHE_BYTES +#else +#define NET_SKB_PAD 32 +#endif + +static inline struct sk_buff *_kc_netdev_alloc_skb_ip_align(struct net_device *dev, + unsigned int length) +{ + struct sk_buff *skb; + + skb = alloc_skb(length + NET_SKB_PAD + NET_IP_ALIGN, GFP_ATOMIC); + if (skb) { +#if (NET_IP_ALIGN + NET_SKB_PAD) + skb_reserve(skb, NET_IP_ALIGN + NET_SKB_PAD); +#endif + skb->dev = dev; + } + return skb; +} + +#ifdef netdev_alloc_skb_ip_align +#undef netdev_alloc_skb_ip_align +#endif +#define netdev_alloc_skb_ip_align(n, l) _kc_netdev_alloc_skb_ip_align(n, l) + +#undef netif_level +#define netif_level(level, priv, type, dev, fmt, args...) \ +do { \ + if (netif_msg_##type(priv)) \ + netdev_##level(dev, fmt, ##args); \ +} while (0) + +#undef usleep_range +#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000)) + +#define u64_stats_update_begin(a) do { } while(0) +#define u64_stats_update_end(a) do { } while(0) +#define u64_stats_fetch_begin(a) do { } while(0) +#define u64_stats_fetch_retry_bh(a) (0) +#define u64_stats_fetch_begin_bh(a) (0) + +#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,1)) +#define HAVE_8021P_SUPPORT +#endif + +#else /* < 2.6.36 */ + + +#define HAVE_PM_QOS_REQUEST_ACTIVE +#define HAVE_8021P_SUPPORT +#define HAVE_NDO_GET_STATS64 +#endif /* < 2.6.36 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) ) +#ifndef netif_set_real_num_rx_queues +static inline int __kc_netif_set_real_num_rx_queues(struct net_device *dev, + unsigned int rxq) +{ + return 0; +} +#define netif_set_real_num_rx_queues(dev, rxq) \ + __kc_netif_set_real_num_rx_queues((dev), (rxq)) +#endif +#ifndef ETHTOOL_RXNTUPLE_ACTION_CLEAR +#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) +#endif +#ifndef VLAN_N_VID +#define VLAN_N_VID VLAN_GROUP_ARRAY_LEN +#endif /* VLAN_N_VID */ +#ifndef ETH_FLAG_TXVLAN +#define ETH_FLAG_TXVLAN (1 << 7) +#endif /* ETH_FLAG_TXVLAN */ +#ifndef ETH_FLAG_RXVLAN +#define ETH_FLAG_RXVLAN (1 << 8) +#endif /* ETH_FLAG_RXVLAN */ + +static inline void _kc_skb_checksum_none_assert(struct sk_buff *skb) +{ + WARN_ON(skb->ip_summed != CHECKSUM_NONE); +} +#define skb_checksum_none_assert(skb) _kc_skb_checksum_none_assert(skb) + +static inline void *_kc_vzalloc_node(unsigned long size, int node) +{ + void *addr = vmalloc_node(size, node); + if (addr) + memset(addr, 0, size); + return addr; +} +#define vzalloc_node(_size, _node) _kc_vzalloc_node(_size, _node) + +static inline void *_kc_vzalloc(unsigned long size) +{ + void *addr = vmalloc(size); + if (addr) + memset(addr, 0, size); + return addr; +} +#define vzalloc(_size) _kc_vzalloc(_size) + +#ifndef vlan_get_protocol +static inline __be16 __kc_vlan_get_protocol(const struct sk_buff *skb) +{ + if (vlan_tx_tag_present(skb) || + skb->protocol != cpu_to_be16(ETH_P_8021Q)) + return skb->protocol; + + if (skb_headlen(skb) < sizeof(struct vlan_ethhdr)) + return 0; + + return ((struct vlan_ethhdr*)skb->data)->h_vlan_encapsulated_proto; +} +#define vlan_get_protocol(_skb) __kc_vlan_get_protocol(_skb) +#endif +#ifdef HAVE_HW_TIME_STAMP +#define SKBTX_HW_TSTAMP (1 << 0) +#define SKBTX_IN_PROGRESS (1 << 2) +#define SKB_SHARED_TX_IS_UNION +#endif + +#ifndef device_wakeup_enable +#define device_wakeup_enable(dev) device_set_wakeup_enable(dev, true) +#endif + +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,4,18) ) +#ifndef HAVE_VLAN_RX_REGISTER +#define HAVE_VLAN_RX_REGISTER +#endif +#endif /* > 2.4.18 */ +#endif /* < 2.6.37 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) ) +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ) +#define skb_checksum_start_offset(skb) skb_transport_offset(skb) +#else /* 2.6.22 -> 2.6.37 */ +static inline int _kc_skb_checksum_start_offset(const struct sk_buff *skb) +{ + return skb->csum_start - skb_headroom(skb); +} +#define skb_checksum_start_offset(skb) _kc_skb_checksum_start_offset(skb) +#endif /* 2.6.22 -> 2.6.37 */ +#ifdef CONFIG_DCB +#ifndef IEEE_8021QAZ_MAX_TCS +#define IEEE_8021QAZ_MAX_TCS 8 +#endif +#ifndef DCB_CAP_DCBX_HOST +#define DCB_CAP_DCBX_HOST 0x01 +#endif +#ifndef DCB_CAP_DCBX_LLD_MANAGED +#define DCB_CAP_DCBX_LLD_MANAGED 0x02 +#endif +#ifndef DCB_CAP_DCBX_VER_CEE +#define DCB_CAP_DCBX_VER_CEE 0x04 +#endif +#ifndef DCB_CAP_DCBX_VER_IEEE +#define DCB_CAP_DCBX_VER_IEEE 0x08 +#endif +#ifndef DCB_CAP_DCBX_STATIC +#define DCB_CAP_DCBX_STATIC 0x10 +#endif +#endif /* CONFIG_DCB */ +#if (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,2)) +#define CONFIG_XPS +#endif /* RHEL_RELEASE_VERSION(6,2) */ +#endif /* < 2.6.38 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39) ) +#ifndef NETIF_F_RXCSUM +#define NETIF_F_RXCSUM (1 << 29) +#endif +#ifndef skb_queue_reverse_walk_safe +#define skb_queue_reverse_walk_safe(queue, skb, tmp) \ + for (skb = (queue)->prev, tmp = skb->prev; \ + skb != (struct sk_buff *)(queue); \ + skb = tmp, tmp = skb->prev) +#endif +#else /* < 2.6.39 */ +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef HAVE_NETDEV_OPS_FCOE_DDP_TARGET +#define HAVE_NETDEV_OPS_FCOE_DDP_TARGET +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ +#ifndef HAVE_MQPRIO +#define HAVE_MQPRIO +#endif +#ifndef HAVE_SETUP_TC +#define HAVE_SETUP_TC +#endif +#ifdef CONFIG_DCB +#ifndef HAVE_DCBNL_IEEE +#define HAVE_DCBNL_IEEE +#endif +#endif /* CONFIG_DCB */ +#ifndef HAVE_NDO_SET_FEATURES +#define HAVE_NDO_SET_FEATURES +#endif +#endif /* < 2.6.39 */ + +/*****************************************************************************/ +/* use < 2.6.40 because of a Fedora 15 kernel update where they + * updated the kernel version to 2.6.40.x and they back-ported 3.0 features + * like set_phys_id for ethtool. + */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,40) ) +#ifdef ETHTOOL_GRXRINGS +#ifndef FLOW_EXT +#define FLOW_EXT 0x80000000 +union _kc_ethtool_flow_union { + struct ethtool_tcpip4_spec tcp_ip4_spec; + struct ethtool_usrip4_spec usr_ip4_spec; + __u8 hdata[60]; +}; +struct _kc_ethtool_flow_ext { + __be16 vlan_etype; + __be16 vlan_tci; + __be32 data[2]; +}; +struct _kc_ethtool_rx_flow_spec { + __u32 flow_type; + union _kc_ethtool_flow_union h_u; + struct _kc_ethtool_flow_ext h_ext; + union _kc_ethtool_flow_union m_u; + struct _kc_ethtool_flow_ext m_ext; + __u64 ring_cookie; + __u32 location; +}; +#define ethtool_rx_flow_spec _kc_ethtool_rx_flow_spec +#endif /* FLOW_EXT */ +#endif + +#define pci_disable_link_state_locked pci_disable_link_state + +#ifndef PCI_LTR_VALUE_MASK +#define PCI_LTR_VALUE_MASK 0x000003ff +#endif +#ifndef PCI_LTR_SCALE_MASK +#define PCI_LTR_SCALE_MASK 0x00001c00 +#endif +#ifndef PCI_LTR_SCALE_SHIFT +#define PCI_LTR_SCALE_SHIFT 10 +#endif + +#else /* < 2.6.40 */ +#define HAVE_ETHTOOL_SET_PHYS_ID +#endif /* < 2.6.40 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0) ) +#define USE_LEGACY_PM_SUPPORT +#endif /* < 3.0.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0) ) +#ifndef __netdev_alloc_skb_ip_align +#define __netdev_alloc_skb_ip_align(d,l,_g) netdev_alloc_skb_ip_align(d,l) +#endif /* __netdev_alloc_skb_ip_align */ +#define dcb_ieee_setapp(dev, app) dcb_setapp(dev, app) +#define dcb_ieee_delapp(dev, app) 0 +#define dcb_ieee_getapp_mask(dev, app) (1 << app->priority) + +/* 1000BASE-T Control register */ +#define CTL1000_AS_MASTER 0x0800 +#define CTL1000_ENABLE_MASTER 0x1000 + +#else /* < 3.1.0 */ +#ifndef HAVE_DCBNL_IEEE_DELAPP +#define HAVE_DCBNL_IEEE_DELAPP +#endif +#endif /* < 3.1.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) ) +#ifdef ETHTOOL_GRXRINGS +#define HAVE_ETHTOOL_GET_RXNFC_VOID_RULE_LOCS +#endif /* ETHTOOL_GRXRINGS */ + +#ifndef skb_frag_size +#define skb_frag_size(frag) _kc_skb_frag_size(frag) +static inline unsigned int _kc_skb_frag_size(const skb_frag_t *frag) +{ + return frag->size; +} +#endif /* skb_frag_size */ + +#ifndef skb_frag_size_sub +#define skb_frag_size_sub(frag, delta) _kc_skb_frag_size_sub(frag, delta) +static inline void _kc_skb_frag_size_sub(skb_frag_t *frag, int delta) +{ + frag->size -= delta; +} +#endif /* skb_frag_size_sub */ + +#ifndef skb_frag_page +#define skb_frag_page(frag) _kc_skb_frag_page(frag) +static inline struct page *_kc_skb_frag_page(const skb_frag_t *frag) +{ + return frag->page; +} +#endif /* skb_frag_page */ + +#ifndef skb_frag_address +#define skb_frag_address(frag) _kc_skb_frag_address(frag) +static inline void *_kc_skb_frag_address(const skb_frag_t *frag) +{ + return page_address(skb_frag_page(frag)) + frag->page_offset; +} +#endif /* skb_frag_address */ + +#ifndef skb_frag_dma_map +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) +#include <linux/dma-mapping.h> +#endif +#define skb_frag_dma_map(dev,frag,offset,size,dir) \ + _kc_skb_frag_dma_map(dev,frag,offset,size,dir) +static inline dma_addr_t _kc_skb_frag_dma_map(struct device *dev, + const skb_frag_t *frag, + size_t offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_page(dev, skb_frag_page(frag), + frag->page_offset + offset, size, dir); +} +#endif /* skb_frag_dma_map */ + +#ifndef __skb_frag_unref +#define __skb_frag_unref(frag) __kc_skb_frag_unref(frag) +static inline void __kc_skb_frag_unref(skb_frag_t *frag) +{ + put_page(skb_frag_page(frag)); +} +#endif /* __skb_frag_unref */ + +#ifndef SPEED_UNKNOWN +#define SPEED_UNKNOWN -1 +#endif +#ifndef DUPLEX_UNKNOWN +#define DUPLEX_UNKNOWN 0xff +#endif +#if (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,3)) +#ifndef HAVE_PCI_DEV_FLAGS_ASSIGNED +#define HAVE_PCI_DEV_FLAGS_ASSIGNED +#endif +#endif +#else /* < 3.2.0 */ +#ifndef HAVE_PCI_DEV_FLAGS_ASSIGNED +#define HAVE_PCI_DEV_FLAGS_ASSIGNED +#define HAVE_VF_SPOOFCHK_CONFIGURE +#endif +#endif /* < 3.2.0 */ + +#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE == RHEL_RELEASE_VERSION(6,2)) +#undef ixgbe_get_netdev_tc_txq +#define ixgbe_get_netdev_tc_txq(dev, tc) (&netdev_extended(dev)->qos_data.tc_to_txq[tc]) +#endif +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0) ) +typedef u32 kni_netdev_features_t; +#undef PCI_EXP_TYPE_RC_EC +#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ +#ifndef CONFIG_BQL +#define netdev_tx_completed_queue(_q, _p, _b) do {} while (0) +#define netdev_completed_queue(_n, _p, _b) do {} while (0) +#define netdev_tx_sent_queue(_q, _b) do {} while (0) +#define netdev_sent_queue(_n, _b) do {} while (0) +#define netdev_tx_reset_queue(_q) do {} while (0) +#define netdev_reset_queue(_n) do {} while (0) +#endif +#else /* ! < 3.3.0 */ +typedef netdev_features_t kni_netdev_features_t; +#define HAVE_INT_NDO_VLAN_RX_ADD_VID +#ifdef ETHTOOL_SRXNTUPLE +#undef ETHTOOL_SRXNTUPLE +#endif +#endif /* < 3.3.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0) ) +#ifndef NETIF_F_RXFCS +#define NETIF_F_RXFCS 0 +#endif /* NETIF_F_RXFCS */ +#ifndef NETIF_F_RXALL +#define NETIF_F_RXALL 0 +#endif /* NETIF_F_RXALL */ + +#if !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) +#define NUMTCS_RETURNS_U8 + +int _kc_simple_open(struct inode *inode, struct file *file); +#define simple_open _kc_simple_open +#endif /* !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) */ + + +#ifndef skb_add_rx_frag +#define skb_add_rx_frag _kc_skb_add_rx_frag +extern void _kc_skb_add_rx_frag(struct sk_buff *, int, struct page *, + int, int, unsigned int); +#endif +#ifdef NET_ADDR_RANDOM +#define eth_hw_addr_random(N) do { \ + random_ether_addr(N->dev_addr); \ + N->addr_assign_type |= NET_ADDR_RANDOM; \ + } while (0) +#else /* NET_ADDR_RANDOM */ +#define eth_hw_addr_random(N) random_ether_addr(N->dev_addr) +#endif /* NET_ADDR_RANDOM */ +#else /* < 3.4.0 */ +#include <linux/kconfig.h> +#endif /* >= 3.4.0 */ + +/*****************************************************************************/ +#if defined(E1000E_PTP) || defined(IGB_PTP) || defined(IXGBE_PTP) || defined(I40E_PTP) +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(3,0,0) ) && IS_ENABLED(CONFIG_PTP_1588_CLOCK) +#define HAVE_PTP_1588_CLOCK +#else +#error Cannot enable PTP Hardware Clock support due to a pre-3.0 kernel version or CONFIG_PTP_1588_CLOCK not enabled in the kernel +#endif /* > 3.0.0 && IS_ENABLED(CONFIG_PTP_1588_CLOCK) */ +#endif /* E1000E_PTP || IGB_PTP || IXGBE_PTP || I40E_PTP */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,5,0) ) +#define skb_tx_timestamp(skb) do {} while (0) +static inline bool __kc_ether_addr_equal(const u8 *addr1, const u8 *addr2) +{ + return !compare_ether_addr(addr1, addr2); +} +#define ether_addr_equal(_addr1, _addr2) __kc_ether_addr_equal((_addr1),(_addr2)) +#else +#define HAVE_FDB_OPS +#define HAVE_ETHTOOL_GET_TS_INFO +#endif /* < 3.5.0 */ + +/*****************************************************************************/ +#include <linux/mdio.h> +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,6,0) ) +#define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */ + +#ifndef MDIO_EEE_100TX +#define MDIO_EEE_100TX 0x0002 /* 100TX EEE cap */ +#endif +#ifndef MDIO_EEE_1000T +#define MDIO_EEE_1000T 0x0004 /* 1000T EEE cap */ +#endif +#ifndef MDIO_EEE_10GT +#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */ +#endif +#ifndef MDIO_EEE_1000KX +#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */ +#endif +#ifndef MDIO_EEE_10GKX4 +#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */ +#endif +#ifndef MDIO_EEE_10GKR +#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */ +#endif +#endif /* < 3.6.0 */ + +/******************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,7,0) ) +#ifndef ADVERTISED_40000baseKR4_Full +/* these defines were all added in one commit, so should be safe + * to trigger activiation on one define + */ +#define SUPPORTED_40000baseKR4_Full (1 << 23) +#define SUPPORTED_40000baseCR4_Full (1 << 24) +#define SUPPORTED_40000baseSR4_Full (1 << 25) +#define SUPPORTED_40000baseLR4_Full (1 << 26) +#define ADVERTISED_40000baseKR4_Full (1 << 23) +#define ADVERTISED_40000baseCR4_Full (1 << 24) +#define ADVERTISED_40000baseSR4_Full (1 << 25) +#define ADVERTISED_40000baseLR4_Full (1 << 26) +#endif + +/** + * mmd_eee_cap_to_ethtool_sup_t + * @eee_cap: value of the MMD EEE Capability register + * + * A small helper function that translates MMD EEE Capability (3.20) bits + * to ethtool supported settings. + */ +static inline u32 __kc_mmd_eee_cap_to_ethtool_sup_t(u16 eee_cap) +{ + u32 supported = 0; + + if (eee_cap & MDIO_EEE_100TX) + supported |= SUPPORTED_100baseT_Full; + if (eee_cap & MDIO_EEE_1000T) + supported |= SUPPORTED_1000baseT_Full; + if (eee_cap & MDIO_EEE_10GT) + supported |= SUPPORTED_10000baseT_Full; + if (eee_cap & MDIO_EEE_1000KX) + supported |= SUPPORTED_1000baseKX_Full; + if (eee_cap & MDIO_EEE_10GKX4) + supported |= SUPPORTED_10000baseKX4_Full; + if (eee_cap & MDIO_EEE_10GKR) + supported |= SUPPORTED_10000baseKR_Full; + + return supported; +} +#define mmd_eee_cap_to_ethtool_sup_t(eee_cap) \ + __kc_mmd_eee_cap_to_ethtool_sup_t(eee_cap) + +/** + * mmd_eee_adv_to_ethtool_adv_t + * @eee_adv: value of the MMD EEE Advertisement/Link Partner Ability registers + * + * A small helper function that translates the MMD EEE Advertisement (7.60) + * and MMD EEE Link Partner Ability (7.61) bits to ethtool advertisement + * settings. + */ +static inline u32 __kc_mmd_eee_adv_to_ethtool_adv_t(u16 eee_adv) +{ + u32 adv = 0; + + if (eee_adv & MDIO_EEE_100TX) + adv |= ADVERTISED_100baseT_Full; + if (eee_adv & MDIO_EEE_1000T) + adv |= ADVERTISED_1000baseT_Full; + if (eee_adv & MDIO_EEE_10GT) + adv |= ADVERTISED_10000baseT_Full; + if (eee_adv & MDIO_EEE_1000KX) + adv |= ADVERTISED_1000baseKX_Full; + if (eee_adv & MDIO_EEE_10GKX4) + adv |= ADVERTISED_10000baseKX4_Full; + if (eee_adv & MDIO_EEE_10GKR) + adv |= ADVERTISED_10000baseKR_Full; + + return adv; +} +#define mmd_eee_adv_to_ethtool_adv_t(eee_adv) \ + __kc_mmd_eee_adv_to_ethtool_adv_t(eee_adv) + +/** + * ethtool_adv_to_mmd_eee_adv_t + * @adv: the ethtool advertisement settings + * + * A small helper function that translates ethtool advertisement settings + * to EEE advertisements for the MMD EEE Advertisement (7.60) and + * MMD EEE Link Partner Ability (7.61) registers. + */ +static inline u16 __kc_ethtool_adv_to_mmd_eee_adv_t(u32 adv) +{ + u16 reg = 0; + + if (adv & ADVERTISED_100baseT_Full) + reg |= MDIO_EEE_100TX; + if (adv & ADVERTISED_1000baseT_Full) + reg |= MDIO_EEE_1000T; + if (adv & ADVERTISED_10000baseT_Full) + reg |= MDIO_EEE_10GT; + if (adv & ADVERTISED_1000baseKX_Full) + reg |= MDIO_EEE_1000KX; + if (adv & ADVERTISED_10000baseKX4_Full) + reg |= MDIO_EEE_10GKX4; + if (adv & ADVERTISED_10000baseKR_Full) + reg |= MDIO_EEE_10GKR; + + return reg; +} +#define ethtool_adv_to_mmd_eee_adv_t(adv) \ + __kc_ethtool_adv_to_mmd_eee_adv_t(adv) + +#ifndef pci_pcie_type +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ) +static inline u8 pci_pcie_type(struct pci_dev *pdev) +{ + int pos; + u16 reg16; + + pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); + if (!pos) + BUG(); + pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); + return (reg16 & PCI_EXP_FLAGS_TYPE) >> 4; +} +#else /* < 2.6.24 */ +#define pci_pcie_type(x) (x)->pcie_type +#endif /* < 2.6.24 */ +#endif /* pci_pcie_type */ + +#define ptp_clock_register(caps, args...) ptp_clock_register(caps) + +#ifndef PCI_EXP_LNKSTA2 +int __kc_pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val); +#define pcie_capability_read_word(d,p,v) __kc_pcie_capability_read_word(d,p,v) +int __kc_pcie_capability_write_word(struct pci_dev *dev, int pos, u16 val); +#define pcie_capability_write_word(d,p,v) __kc_pcie_capability_write_word(d,p,v) +int __kc_pcie_capability_clear_and_set_word(struct pci_dev *dev, int pos, + u16 clear, u16 set); +#define pcie_capability_clear_and_set_word(d,p,c,s) \ + __kc_pcie_capability_clear_and_set_word(d,p,c,s) + +#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ + +static inline int pcie_capability_clear_word(struct pci_dev *dev, int pos, + u16 clear) +{ + return __kc_pcie_capability_clear_and_set_word(dev, pos, clear, 0); +} +#endif /* !PCI_EXP_LNKSTA2 */ + +#if (SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) +#define USE_CONST_DEV_UC_CHAR +#endif + +#else /* >= 3.7.0 */ +#define HAVE_CONST_STRUCT_PCI_ERROR_HANDLERS +#define USE_CONST_DEV_UC_CHAR +#endif /* >= 3.7.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0) ) +#ifndef PCI_EXP_LNKCTL_ASPM_L0S +#define PCI_EXP_LNKCTL_ASPM_L0S 0x01 /* L0s Enable */ +#endif +#ifndef PCI_EXP_LNKCTL_ASPM_L1 +#define PCI_EXP_LNKCTL_ASPM_L1 0x02 /* L1 Enable */ +#endif +#define HAVE_CONFIG_HOTPLUG +/* Reserved Ethernet Addresses per IEEE 802.1Q */ +static const u8 eth_reserved_addr_base[ETH_ALEN] __aligned(2) = { + 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 }; +#if !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) &&\ + !(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,5)) +static inline bool is_link_local_ether_addr(const u8 *addr) +{ + __be16 *a = (__be16 *)addr; + static const __be16 *b = (const __be16 *)eth_reserved_addr_base; + static const __be16 m = cpu_to_be16(0xfff0); + + return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | ((a[2] ^ b[2]) & m)) == 0; +} +#endif /* !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,3,0)) */ +#else /* >= 3.8.0 */ +#ifndef __devinit +#define __devinit +#define HAVE_ENCAP_CSUM_OFFLOAD +#endif + +#ifndef __devinitdata +#define __devinitdata +#endif + +#ifndef __devexit +#define __devexit +#endif + +#ifndef __devexit_p +#define __devexit_p +#endif + +#ifndef HAVE_SRIOV_CONFIGURE +#define HAVE_SRIOV_CONFIGURE +#endif + +#define HAVE_BRIDGE_ATTRIBS +#ifndef BRIDGE_MODE_VEB +#define BRIDGE_MODE_VEB 0 /* Default loopback mode */ +#endif /* BRIDGE_MODE_VEB */ +#ifndef BRIDGE_MODE_VEPA +#define BRIDGE_MODE_VEPA 1 /* 802.1Qbg defined VEPA mode */ +#endif /* BRIDGE_MODE_VEPA */ +#endif /* >= 3.8.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,9,0) ) + +#undef hlist_entry +#define hlist_entry(ptr, type, member) container_of(ptr,type,member) + +#undef hlist_entry_safe +#define hlist_entry_safe(ptr, type, member) \ + (ptr) ? hlist_entry(ptr, type, member) : NULL + +#undef hlist_for_each_entry +#define hlist_for_each_entry(pos, head, member) \ + for (pos = hlist_entry_safe((head)->first, typeof(*(pos)), member); \ + pos; \ + pos = hlist_entry_safe((pos)->member.next, typeof(*(pos)), member)) + +#undef hlist_for_each_entry_safe +#define hlist_for_each_entry_safe(pos, n, head, member) \ + for (pos = hlist_entry_safe((head)->first, typeof(*pos), member); \ + pos && ({ n = pos->member.next; 1; }); \ + pos = hlist_entry_safe(n, typeof(*pos), member)) + +#ifdef CONFIG_XPS +extern int __kc_netif_set_xps_queue(struct net_device *, struct cpumask *, u16); +#define netif_set_xps_queue(_dev, _mask, _idx) __kc_netif_set_xps_queue((_dev), (_mask), (_idx)) +#else /* CONFIG_XPS */ +#define netif_set_xps_queue(_dev, _mask, _idx) do {} while (0) +#endif /* CONFIG_XPS */ + +#ifdef HAVE_NETDEV_SELECT_QUEUE +#define _kc_hashrnd 0xd631614b /* not so random hash salt */ +extern u16 __kc_netdev_pick_tx(struct net_device *dev, struct sk_buff *skb); +#define __netdev_pick_tx __kc_netdev_pick_tx +#endif /* HAVE_NETDEV_SELECT_QUEUE */ +#else +#define HAVE_BRIDGE_FILTER +#define USE_DEFAULT_FDB_DEL_DUMP +#endif /* < 3.9.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ) +#ifdef CONFIG_PCI_IOV +extern int __kc_pci_vfs_assigned(struct pci_dev *dev); +#else +static inline int __kc_pci_vfs_assigned(struct pci_dev *dev) +{ + return 0; +} +#endif +#define pci_vfs_assigned(dev) __kc_pci_vfs_assigned(dev) + +#ifndef VLAN_TX_COOKIE_MAGIC +static inline struct sk_buff *__kc__vlan_hwaccel_put_tag(struct sk_buff *skb, + u16 vlan_tci) +{ +#ifdef VLAN_TAG_PRESENT + vlan_tci |= VLAN_TAG_PRESENT; +#endif + skb->vlan_tci = vlan_tci; + return skb; +} +#define __vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci) \ + __kc__vlan_hwaccel_put_tag(skb, vlan_tci) +#endif + +#else /* >= 3.10.0 */ +#define HAVE_ENCAP_TSO_OFFLOAD +#endif /* >= 3.10.0 */ + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,14,0) ) +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,6))) +#if (!(UBUNTU_KERNEL_CODE >= UBUNTU_KERNEL_VERSION(3,13,0,30,0) \ + && (UBUNTU_RELEASE_CODE == UBUNTU_RELEASE_VERSION(12,4) \ + || UBUNTU_RELEASE_CODE == UBUNTU_RELEASE_VERSION(14,4)))) +#if (!(SLE_VERSION_CODE == SLE_VERSION(12,0,0))) +#ifdef NETIF_F_RXHASH +#define PKT_HASH_TYPE_L3 0 +static inline void +skb_set_hash(struct sk_buff *skb, __u32 hash, __always_unused int type) +{ + skb->rxhash = hash; +} +#endif /* NETIF_F_RXHASH */ +#endif /* < SLES12 */ +#endif /* < 3.13.0-30.54 (Ubuntu 14.04) */ +#endif /* < RHEL7 */ +#endif /* < 3.14.0 */ + +#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(3,16,0) ) \ + || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,2) )) +#undef SET_ETHTOOL_OPS +#define SET_ETHTOOL_OPS(netdev, ops) ((netdev)->ethtool_ops = (ops)) +#define HAVE_VF_MIN_MAX_TXRATE 1 +#endif /* >= 3.16.0 */ + +#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(3,19,0) ) \ + || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,2) )) +#define HAVE_NDO_DFLT_BRIDGE_ADD_MASK +#if ( RHEL_RELEASE_CODE != RHEL_RELEASE_VERSION(7,2) ) +#define HAVE_NDO_FDB_ADD_VID +#endif /* !RHEL 7.2 */ +#endif /* >= 3.19.0 */ + +#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(4,0,0) ) \ + || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,2) )) +/* vlan_tx_xx functions got renamed to skb_vlan */ +#define vlan_tx_tag_get skb_vlan_tag_get +#define vlan_tx_tag_present skb_vlan_tag_present +#if ( RHEL_RELEASE_CODE != RHEL_RELEASE_VERSION(7,2) ) +#define HAVE_NDO_BRIDGE_SET_DEL_LINK_FLAGS +#endif /* !RHEL 7.2 */ +#endif /* 4.0.0 */ + +#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(4,1,0) ) \ + || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,3) )) +/* ndo_bridge_getlink adds new nlflags parameter */ +#define HAVE_NDO_BRIDGE_GETLINK_NLFLAGS +#endif /* >= 4.1.0 */ + +#if (( LINUX_VERSION_CODE >= KERNEL_VERSION(4,2,0) ) \ + || ( RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7,4) )) +/* ndo_bridge_getlink adds new filter_mask and vlan_fill parameters */ +#define HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL +#endif /* >= 4.2.0 */ + +/* + * vlan_tx_tag_* macros renamed to skb_vlan_tag_* (Linux commit: df8a39defad4) + * For older kernels backported this commit, need to use renamed functions. + * This fix is specific to RedHat/CentOS kernels. + */ +#if (defined(RHEL_RELEASE_CODE) && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 8)) && \ + (LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34))) +#define vlan_tx_tag_get skb_vlan_tag_get +#define vlan_tx_tag_present skb_vlan_tag_present +#endif + +#if ((LINUX_VERSION_CODE >= KERNEL_VERSION(4, 9, 0)) || \ + (SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(12, 3, 0)) || \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7, 4))) +#define HAVE_VF_VLAN_PROTO +#if (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(7, 4)) +/* In RHEL/Centos 7.4, the "new" version of ndo_set_vf_vlan + * is in the struct net_device_ops_extended */ +#define ndo_set_vf_vlan extended.ndo_set_vf_vlan +#endif +#endif + +#if (defined(RHEL_RELEASE_CODE) && \ + (RHEL_RELEASE_VERSION(7, 5) <= RHEL_RELEASE_CODE)) +#define ndo_change_mtu ndo_change_mtu_rh74 +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(4, 8, 0) +#define HAVE_PCI_ENABLE_MSIX +#endif + +#if defined(timer_setup) && defined(from_timer) +#define HAVE_TIMER_SETUP +#endif + +#endif /* _KCOMPAT_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe.h new file mode 100644 index 00000000..6ff94133 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe.h @@ -0,0 +1,910 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_H_ +#define _IXGBE_H_ + +#ifndef IXGBE_NO_LRO +#include <net/tcp.h> +#endif + +#include <linux/pci.h> +#include <linux/netdevice.h> +#ifdef HAVE_IRQ_AFFINITY_HINT +#include <linux/cpumask.h> +#endif /* HAVE_IRQ_AFFINITY_HINT */ +#include <linux/vmalloc.h> + +#ifdef SIOCETHTOOL +#include <linux/ethtool.h> +#endif +#ifdef NETIF_F_HW_VLAN_TX +#include <linux/if_vlan.h> +#endif +#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) +#define IXGBE_DCA +#include <linux/dca.h> +#endif +#include "ixgbe_dcb.h" + +#include "kcompat.h" + +#ifdef HAVE_SCTP +#include <linux/sctp.h> +#endif + +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#define IXGBE_FCOE +#include "ixgbe_fcoe.h" +#endif /* CONFIG_FCOE or CONFIG_FCOE_MODULE */ + +#if defined(CONFIG_PTP_1588_CLOCK) || defined(CONFIG_PTP_1588_CLOCK_MODULE) +#define HAVE_IXGBE_PTP +#endif + +#include "ixgbe_api.h" + +#define PFX "ixgbe: " +#define DPRINTK(nlevel, klevel, fmt, args...) \ + ((void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \ + printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \ + __func__ , ## args))) + +/* TX/RX descriptor defines */ +#define IXGBE_DEFAULT_TXD 512 +#define IXGBE_DEFAULT_TX_WORK 256 +#define IXGBE_MAX_TXD 4096 +#define IXGBE_MIN_TXD 64 + +#define IXGBE_DEFAULT_RXD 512 +#define IXGBE_DEFAULT_RX_WORK 256 +#define IXGBE_MAX_RXD 4096 +#define IXGBE_MIN_RXD 64 + + +/* flow control */ +#define IXGBE_MIN_FCRTL 0x40 +#define IXGBE_MAX_FCRTL 0x7FF80 +#define IXGBE_MIN_FCRTH 0x600 +#define IXGBE_MAX_FCRTH 0x7FFF0 +#define IXGBE_DEFAULT_FCPAUSE 0xFFFF +#define IXGBE_MIN_FCPAUSE 0 +#define IXGBE_MAX_FCPAUSE 0xFFFF + +/* Supported Rx Buffer Sizes */ +#define IXGBE_RXBUFFER_512 512 /* Used for packet split */ +#ifdef CONFIG_IXGBE_DISABLE_PACKET_SPLIT +#define IXGBE_RXBUFFER_1536 1536 +#define IXGBE_RXBUFFER_2K 2048 +#define IXGBE_RXBUFFER_3K 3072 +#define IXGBE_RXBUFFER_4K 4096 +#define IXGBE_RXBUFFER_7K 7168 +#define IXGBE_RXBUFFER_8K 8192 +#define IXGBE_RXBUFFER_15K 15360 +#endif /* CONFIG_IXGBE_DISABLE_PACKET_SPLIT */ +#define IXGBE_MAX_RXBUFFER 16384 /* largest size for single descriptor */ + +/* + * NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN mans we + * reserve 2 more, and skb_shared_info adds an additional 384 bytes more, + * this adds up to 512 bytes of extra data meaning the smallest allocation + * we could have is 1K. + * i.e. RXBUFFER_512 --> size-1024 slab + */ +#define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_512 + +#define MAXIMUM_ETHERNET_VLAN_SIZE (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN) + +/* How many Rx Buffers do we bundle into one write to the hardware ? */ +#define IXGBE_RX_BUFFER_WRITE 16 /* Must be power of 2 */ + +#define IXGBE_TX_FLAGS_CSUM (u32)(1) +#define IXGBE_TX_FLAGS_HW_VLAN (u32)(1 << 1) +#define IXGBE_TX_FLAGS_SW_VLAN (u32)(1 << 2) +#define IXGBE_TX_FLAGS_TSO (u32)(1 << 3) +#define IXGBE_TX_FLAGS_IPV4 (u32)(1 << 4) +#define IXGBE_TX_FLAGS_FCOE (u32)(1 << 5) +#define IXGBE_TX_FLAGS_FSO (u32)(1 << 6) +#define IXGBE_TX_FLAGS_TXSW (u32)(1 << 7) +#define IXGBE_TX_FLAGS_TSTAMP (u32)(1 << 8) +#define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000 +#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0xe0000000 +#define IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT 29 +#define IXGBE_TX_FLAGS_VLAN_SHIFT 16 + +#define IXGBE_MAX_RX_DESC_POLL 10 + +#define IXGBE_MAX_VF_MC_ENTRIES 30 +#define IXGBE_MAX_VF_FUNCTIONS 64 +#define IXGBE_MAX_VFTA_ENTRIES 128 +#define MAX_EMULATION_MAC_ADDRS 16 +#define IXGBE_MAX_PF_MACVLANS 15 +#define IXGBE_82599_VF_DEVICE_ID 0x10ED +#define IXGBE_X540_VF_DEVICE_ID 0x1515 + +#ifdef CONFIG_PCI_IOV +#define VMDQ_P(p) ((p) + adapter->num_vfs) +#else +#define VMDQ_P(p) (p) +#endif + +#define UPDATE_VF_COUNTER_32bit(reg, last_counter, counter) \ + { \ + u32 current_counter = IXGBE_READ_REG(hw, reg); \ + if (current_counter < last_counter) \ + counter += 0x100000000LL; \ + last_counter = current_counter; \ + counter &= 0xFFFFFFFF00000000LL; \ + counter |= current_counter; \ + } + +#define UPDATE_VF_COUNTER_36bit(reg_lsb, reg_msb, last_counter, counter) \ + { \ + u64 current_counter_lsb = IXGBE_READ_REG(hw, reg_lsb); \ + u64 current_counter_msb = IXGBE_READ_REG(hw, reg_msb); \ + u64 current_counter = (current_counter_msb << 32) | \ + current_counter_lsb; \ + if (current_counter < last_counter) \ + counter += 0x1000000000LL; \ + last_counter = current_counter; \ + counter &= 0xFFFFFFF000000000LL; \ + counter |= current_counter; \ + } + +struct vf_stats { + u64 gprc; + u64 gorc; + u64 gptc; + u64 gotc; + u64 mprc; +}; + +struct vf_data_storage { + unsigned char vf_mac_addresses[ETH_ALEN]; + u16 vf_mc_hashes[IXGBE_MAX_VF_MC_ENTRIES]; + u16 num_vf_mc_hashes; + u16 default_vf_vlan_id; + u16 vlans_enabled; + bool clear_to_send; + struct vf_stats vfstats; + struct vf_stats last_vfstats; + struct vf_stats saved_rst_vfstats; + bool pf_set_mac; + u16 pf_vlan; /* When set, guest VLAN config not allowed. */ + u16 pf_qos; + u16 tx_rate; + u16 vlan_count; + u8 spoofchk_enabled; + struct pci_dev *vfdev; +}; + +struct vf_macvlans { + struct list_head l; + int vf; + bool free; + bool is_macvlan; + u8 vf_macvlan[ETH_ALEN]; +}; + +#ifndef IXGBE_NO_LRO +#define IXGBE_LRO_MAX 32 /*Maximum number of LRO descriptors*/ +#define IXGBE_LRO_GLOBAL 10 + +struct ixgbe_lro_stats { + u32 flushed; + u32 coal; +}; + +/* + * ixgbe_lro_header - header format to be aggregated by LRO + * @iph: IP header without options + * @tcp: TCP header + * @ts: Optional TCP timestamp data in TCP options + * + * This structure relies on the check above that verifies that the header + * is IPv4 and does not contain any options. + */ +struct ixgbe_lrohdr { + struct iphdr iph; + struct tcphdr th; + __be32 ts[0]; +}; + +struct ixgbe_lro_list { + struct sk_buff_head active; + struct ixgbe_lro_stats stats; +}; + +#endif /* IXGBE_NO_LRO */ +#define IXGBE_MAX_TXD_PWR 14 +#define IXGBE_MAX_DATA_PER_TXD (1 << IXGBE_MAX_TXD_PWR) + +/* Tx Descriptors needed, worst case */ +#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IXGBE_MAX_DATA_PER_TXD) +#ifdef MAX_SKB_FRAGS +#define DESC_NEEDED ((MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE)) + 4) +#else +#define DESC_NEEDED 4 +#endif + +/* wrapper around a pointer to a socket buffer, + * so a DMA handle can be stored along with the buffer */ +struct ixgbe_tx_buffer { + union ixgbe_adv_tx_desc *next_to_watch; + unsigned long time_stamp; + struct sk_buff *skb; + unsigned int bytecount; + unsigned short gso_segs; + __be16 protocol; + DEFINE_DMA_UNMAP_ADDR(dma); + DEFINE_DMA_UNMAP_LEN(len); + u32 tx_flags; +}; + +struct ixgbe_rx_buffer { + struct sk_buff *skb; + dma_addr_t dma; +#ifndef CONFIG_IXGBE_DISABLE_PACKET_SPLIT + struct page *page; + unsigned int page_offset; +#endif +}; + +struct ixgbe_queue_stats { + u64 packets; + u64 bytes; +}; + +struct ixgbe_tx_queue_stats { + u64 restart_queue; + u64 tx_busy; + u64 tx_done_old; +}; + +struct ixgbe_rx_queue_stats { + u64 rsc_count; + u64 rsc_flush; + u64 non_eop_descs; + u64 alloc_rx_page_failed; + u64 alloc_rx_buff_failed; + u64 csum_err; +}; + +enum ixgbe_ring_state_t { + __IXGBE_TX_FDIR_INIT_DONE, + __IXGBE_TX_DETECT_HANG, + __IXGBE_HANG_CHECK_ARMED, + __IXGBE_RX_RSC_ENABLED, +#ifndef HAVE_NDO_SET_FEATURES + __IXGBE_RX_CSUM_ENABLED, +#endif + __IXGBE_RX_CSUM_UDP_ZERO_ERR, +#ifdef IXGBE_FCOE + __IXGBE_RX_FCOE_BUFSZ, +#endif +}; + +#define check_for_tx_hang(ring) \ + test_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state) +#define set_check_for_tx_hang(ring) \ + set_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state) +#define clear_check_for_tx_hang(ring) \ + clear_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state) +#ifndef IXGBE_NO_HW_RSC +#define ring_is_rsc_enabled(ring) \ + test_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state) +#else +#define ring_is_rsc_enabled(ring) false +#endif +#define set_ring_rsc_enabled(ring) \ + set_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state) +#define clear_ring_rsc_enabled(ring) \ + clear_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state) +#define netdev_ring(ring) (ring->netdev) +#define ring_queue_index(ring) (ring->queue_index) + + +struct ixgbe_ring { + struct ixgbe_ring *next; /* pointer to next ring in q_vector */ + struct ixgbe_q_vector *q_vector; /* backpointer to host q_vector */ + struct net_device *netdev; /* netdev ring belongs to */ + struct device *dev; /* device for DMA mapping */ + void *desc; /* descriptor ring memory */ + union { + struct ixgbe_tx_buffer *tx_buffer_info; + struct ixgbe_rx_buffer *rx_buffer_info; + }; + unsigned long state; + u8 __iomem *tail; + dma_addr_t dma; /* phys. address of descriptor ring */ + unsigned int size; /* length in bytes */ + + u16 count; /* amount of descriptors */ + + u8 queue_index; /* needed for multiqueue queue management */ + u8 reg_idx; /* holds the special value that gets + * the hardware register offset + * associated with this ring, which is + * different for DCB and RSS modes + */ + u16 next_to_use; + u16 next_to_clean; + + union { +#ifdef CONFIG_IXGBE_DISABLE_PACKET_SPLIT + u16 rx_buf_len; +#else + u16 next_to_alloc; +#endif + struct { + u8 atr_sample_rate; + u8 atr_count; + }; + }; + + u8 dcb_tc; + struct ixgbe_queue_stats stats; + union { + struct ixgbe_tx_queue_stats tx_stats; + struct ixgbe_rx_queue_stats rx_stats; + }; +} ____cacheline_internodealigned_in_smp; + +enum ixgbe_ring_f_enum { + RING_F_NONE = 0, + RING_F_VMDQ, /* SR-IOV uses the same ring feature */ + RING_F_RSS, + RING_F_FDIR, +#ifdef IXGBE_FCOE + RING_F_FCOE, +#endif /* IXGBE_FCOE */ + RING_F_ARRAY_SIZE /* must be last in enum set */ +}; + +#define IXGBE_MAX_DCB_INDICES 8 +#define IXGBE_MAX_RSS_INDICES 16 +#define IXGBE_MAX_VMDQ_INDICES 64 +#define IXGBE_MAX_FDIR_INDICES 64 +#ifdef IXGBE_FCOE +#define IXGBE_MAX_FCOE_INDICES 8 +#define MAX_RX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES) +#define MAX_TX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES) +#else +#define MAX_RX_QUEUES IXGBE_MAX_FDIR_INDICES +#define MAX_TX_QUEUES IXGBE_MAX_FDIR_INDICES +#endif /* IXGBE_FCOE */ +struct ixgbe_ring_feature { + int indices; + int mask; +}; + +#ifndef CONFIG_IXGBE_DISABLE_PACKET_SPLIT +/* + * FCoE requires that all Rx buffers be over 2200 bytes in length. Since + * this is twice the size of a half page we need to double the page order + * for FCoE enabled Rx queues. + */ +#if defined(IXGBE_FCOE) && (PAGE_SIZE < 8192) +static inline unsigned int ixgbe_rx_pg_order(struct ixgbe_ring *ring) +{ + return test_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state) ? 1 : 0; +} +#else +#define ixgbe_rx_pg_order(_ring) 0 +#endif +#define ixgbe_rx_pg_size(_ring) (PAGE_SIZE << ixgbe_rx_pg_order(_ring)) +#define ixgbe_rx_bufsz(_ring) ((PAGE_SIZE / 2) << ixgbe_rx_pg_order(_ring)) + +#endif +struct ixgbe_ring_container { + struct ixgbe_ring *ring; /* pointer to linked list of rings */ + unsigned int total_bytes; /* total bytes processed this int */ + unsigned int total_packets; /* total packets processed this int */ + u16 work_limit; /* total work allowed per interrupt */ + u8 count; /* total number of rings in vector */ + u8 itr; /* current ITR setting for ring */ +}; + +/* iterator for handling rings in ring container */ +#define ixgbe_for_each_ring(pos, head) \ + for (pos = (head).ring; pos != NULL; pos = pos->next) + +#define MAX_RX_PACKET_BUFFERS ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) \ + ? 8 : 1) +#define MAX_TX_PACKET_BUFFERS MAX_RX_PACKET_BUFFERS + +/* MAX_MSIX_Q_VECTORS of these are allocated, + * but we only use one per queue-specific vector. + */ +struct ixgbe_q_vector { + struct ixgbe_adapter *adapter; + int cpu; /* CPU for DCA */ + u16 v_idx; /* index of q_vector within array, also used for + * finding the bit in EICR and friends that + * represents the vector for this ring */ + u16 itr; /* Interrupt throttle rate written to EITR */ + struct ixgbe_ring_container rx, tx; + +#ifdef CONFIG_IXGBE_NAPI + struct napi_struct napi; +#endif +#ifndef HAVE_NETDEV_NAPI_LIST + struct net_device poll_dev; +#endif +#ifdef HAVE_IRQ_AFFINITY_HINT + cpumask_t affinity_mask; +#endif +#ifndef IXGBE_NO_LRO + struct ixgbe_lro_list lrolist; /* LRO list for queue vector*/ +#endif + int numa_node; + char name[IFNAMSIZ + 9]; + + /* for dynamic allocation of rings associated with this q_vector */ + struct ixgbe_ring ring[0] ____cacheline_internodealigned_in_smp; +}; + +/* + * microsecond values for various ITR rates shifted by 2 to fit itr register + * with the first 3 bits reserved 0 + */ +#define IXGBE_MIN_RSC_ITR 24 +#define IXGBE_100K_ITR 40 +#define IXGBE_20K_ITR 200 +#define IXGBE_16K_ITR 248 +#define IXGBE_10K_ITR 400 +#define IXGBE_8K_ITR 500 + +/* ixgbe_test_staterr - tests bits in Rx descriptor status and error fields */ +static inline __le32 ixgbe_test_staterr(union ixgbe_adv_rx_desc *rx_desc, + const u32 stat_err_bits) +{ + return rx_desc->wb.upper.status_error & cpu_to_le32(stat_err_bits); +} + +/* ixgbe_desc_unused - calculate if we have unused descriptors */ +static inline u16 ixgbe_desc_unused(struct ixgbe_ring *ring) +{ + u16 ntc = ring->next_to_clean; + u16 ntu = ring->next_to_use; + + return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1; +} + +#define IXGBE_RX_DESC(R, i) \ + (&(((union ixgbe_adv_rx_desc *)((R)->desc))[i])) +#define IXGBE_TX_DESC(R, i) \ + (&(((union ixgbe_adv_tx_desc *)((R)->desc))[i])) +#define IXGBE_TX_CTXTDESC(R, i) \ + (&(((struct ixgbe_adv_tx_context_desc *)((R)->desc))[i])) + +#define IXGBE_MAX_JUMBO_FRAME_SIZE 16128 +#ifdef IXGBE_FCOE +/* use 3K as the baby jumbo frame size for FCoE */ +#define IXGBE_FCOE_JUMBO_FRAME_SIZE 3072 +#endif /* IXGBE_FCOE */ + +#define TCP_TIMER_VECTOR 0 +#define OTHER_VECTOR 1 +#define NON_Q_VECTORS (OTHER_VECTOR + TCP_TIMER_VECTOR) + +#define IXGBE_MAX_MSIX_Q_VECTORS_82599 64 +#define IXGBE_MAX_MSIX_Q_VECTORS_82598 16 + +struct ixgbe_mac_addr { + u8 addr[ETH_ALEN]; + u16 queue; + u16 state; /* bitmask */ +}; +#define IXGBE_MAC_STATE_DEFAULT 0x1 +#define IXGBE_MAC_STATE_MODIFIED 0x2 +#define IXGBE_MAC_STATE_IN_USE 0x4 + +#ifdef IXGBE_PROCFS +struct ixgbe_therm_proc_data { + struct ixgbe_hw *hw; + struct ixgbe_thermal_diode_data *sensor_data; +}; + +#endif /* IXGBE_PROCFS */ + +/* + * Only for array allocations in our adapter struct. On 82598, there will be + * unused entries in the array, but that's not a big deal. Also, in 82599, + * we can actually assign 64 queue vectors based on our extended-extended + * interrupt registers. This is different than 82598, which is limited to 16. + */ +#define MAX_MSIX_Q_VECTORS IXGBE_MAX_MSIX_Q_VECTORS_82599 +#define MAX_MSIX_COUNT IXGBE_MAX_MSIX_VECTORS_82599 + +#define MIN_MSIX_Q_VECTORS 1 +#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS) + +/* default to trying for four seconds */ +#define IXGBE_TRY_LINK_TIMEOUT (4 * HZ) + +/* board specific private data structure */ +struct ixgbe_adapter { +#ifdef NETIF_F_HW_VLAN_TX +#ifdef HAVE_VLAN_RX_REGISTER + struct vlan_group *vlgrp; /* must be first, see ixgbe_receive_skb */ +#else + unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; +#endif +#endif /* NETIF_F_HW_VLAN_TX */ + /* OS defined structs */ + struct net_device *netdev; + struct pci_dev *pdev; + + unsigned long state; + + /* Some features need tri-state capability, + * thus the additional *_CAPABLE flags. + */ + u32 flags; +#define IXGBE_FLAG_MSI_CAPABLE (u32)(1 << 0) +#define IXGBE_FLAG_MSI_ENABLED (u32)(1 << 1) +#define IXGBE_FLAG_MSIX_CAPABLE (u32)(1 << 2) +#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 3) +#ifndef IXGBE_NO_LLI +#define IXGBE_FLAG_LLI_PUSH (u32)(1 << 4) +#endif +#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 8) +#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) +#define IXGBE_FLAG_DCA_ENABLED (u32)(1 << 9) +#define IXGBE_FLAG_DCA_CAPABLE (u32)(1 << 10) +#define IXGBE_FLAG_DCA_ENABLED_DATA (u32)(1 << 11) +#else +#define IXGBE_FLAG_DCA_ENABLED (u32)0 +#define IXGBE_FLAG_DCA_CAPABLE (u32)0 +#define IXGBE_FLAG_DCA_ENABLED_DATA (u32)0 +#endif +#define IXGBE_FLAG_MQ_CAPABLE (u32)(1 << 12) +#define IXGBE_FLAG_DCB_ENABLED (u32)(1 << 13) +#define IXGBE_FLAG_DCB_CAPABLE (u32)(1 << 14) +#define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 15) +#define IXGBE_FLAG_RSS_CAPABLE (u32)(1 << 16) +#define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 18) +#define IXGBE_FLAG_FAN_FAIL_CAPABLE (u32)(1 << 19) +#define IXGBE_FLAG_NEED_LINK_UPDATE (u32)(1 << 20) +#define IXGBE_FLAG_NEED_LINK_CONFIG (u32)(1 << 21) +#define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 22) +#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 23) +#ifdef IXGBE_FCOE +#define IXGBE_FLAG_FCOE_CAPABLE (u32)(1 << 24) +#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 25) +#endif /* IXGBE_FCOE */ +#define IXGBE_FLAG_SRIOV_CAPABLE (u32)(1 << 26) +#define IXGBE_FLAG_SRIOV_ENABLED (u32)(1 << 27) +#define IXGBE_FLAG_SRIOV_REPLICATION_ENABLE (u32)(1 << 28) +#define IXGBE_FLAG_SRIOV_L2SWITCH_ENABLE (u32)(1 << 29) +#define IXGBE_FLAG_SRIOV_L2LOOPBACK_ENABLE (u32)(1 << 30) +#define IXGBE_FLAG_RX_BB_CAPABLE (u32)(1 << 31) + + u32 flags2; +#ifndef IXGBE_NO_HW_RSC +#define IXGBE_FLAG2_RSC_CAPABLE (u32)(1) +#define IXGBE_FLAG2_RSC_ENABLED (u32)(1 << 1) +#else +#define IXGBE_FLAG2_RSC_CAPABLE 0 +#define IXGBE_FLAG2_RSC_ENABLED 0 +#endif +#define IXGBE_FLAG2_VMDQ_DEFAULT_OVERRIDE (u32)(1 << 2) +#define IXGBE_FLAG2_TEMP_SENSOR_CAPABLE (u32)(1 << 4) +#define IXGBE_FLAG2_TEMP_SENSOR_EVENT (u32)(1 << 5) +#define IXGBE_FLAG2_SEARCH_FOR_SFP (u32)(1 << 6) +#define IXGBE_FLAG2_SFP_NEEDS_RESET (u32)(1 << 7) +#define IXGBE_FLAG2_RESET_REQUESTED (u32)(1 << 8) +#define IXGBE_FLAG2_FDIR_REQUIRES_REINIT (u32)(1 << 9) +#define IXGBE_FLAG2_RSS_FIELD_IPV4_UDP (u32)(1 << 10) +#define IXGBE_FLAG2_RSS_FIELD_IPV6_UDP (u32)(1 << 11) +#define IXGBE_FLAG2_OVERFLOW_CHECK_ENABLED (u32)(1 << 12) + + /* Tx fast path data */ + int num_tx_queues; + u16 tx_itr_setting; + u16 tx_work_limit; + + /* Rx fast path data */ + int num_rx_queues; + u16 rx_itr_setting; + u16 rx_work_limit; + + /* TX */ + struct ixgbe_ring *tx_ring[MAX_TX_QUEUES] ____cacheline_aligned_in_smp; + + u64 restart_queue; + u64 lsc_int; + u32 tx_timeout_count; + + /* RX */ + struct ixgbe_ring *rx_ring[MAX_RX_QUEUES]; + int num_rx_pools; /* == num_rx_queues in 82598 */ + int num_rx_queues_per_pool; /* 1 if 82598, can be many if 82599 */ + u64 hw_csum_rx_error; + u64 hw_rx_no_dma_resources; + u64 rsc_total_count; + u64 rsc_total_flush; + u64 non_eop_descs; +#ifndef CONFIG_IXGBE_NAPI + u64 rx_dropped_backlog; /* count drops from rx intr handler */ +#endif + u32 alloc_rx_page_failed; + u32 alloc_rx_buff_failed; + + struct ixgbe_q_vector *q_vector[MAX_MSIX_Q_VECTORS]; + +#ifdef HAVE_DCBNL_IEEE + struct ieee_pfc *ixgbe_ieee_pfc; + struct ieee_ets *ixgbe_ieee_ets; +#endif + struct ixgbe_dcb_config dcb_cfg; + struct ixgbe_dcb_config temp_dcb_cfg; + u8 dcb_set_bitmap; + u8 dcbx_cap; +#ifndef HAVE_MQPRIO + u8 tc; +#endif + enum ixgbe_fc_mode last_lfc_mode; + + int num_msix_vectors; + int max_msix_q_vectors; /* true count of q_vectors for device */ + struct ixgbe_ring_feature ring_feature[RING_F_ARRAY_SIZE]; + struct msix_entry *msix_entries; + +#ifndef HAVE_NETDEV_STATS_IN_NETDEV + struct net_device_stats net_stats; +#endif +#ifndef IXGBE_NO_LRO + struct ixgbe_lro_stats lro_stats; +#endif + +#ifdef ETHTOOL_TEST + u32 test_icr; + struct ixgbe_ring test_tx_ring; + struct ixgbe_ring test_rx_ring; +#endif + + /* structs defined in ixgbe_hw.h */ + struct ixgbe_hw hw; + u16 msg_enable; + struct ixgbe_hw_stats stats; +#ifndef IXGBE_NO_LLI + u32 lli_port; + u32 lli_size; + u32 lli_etype; + u32 lli_vlan_pri; +#endif /* IXGBE_NO_LLI */ + + u32 *config_space; + u64 tx_busy; + unsigned int tx_ring_count; + unsigned int rx_ring_count; + + u32 link_speed; + bool link_up; + unsigned long link_check_timeout; + + struct timer_list service_timer; + struct work_struct service_task; + + struct hlist_head fdir_filter_list; + unsigned long fdir_overflow; /* number of times ATR was backed off */ + union ixgbe_atr_input fdir_mask; + int fdir_filter_count; + u32 fdir_pballoc; + u32 atr_sample_rate; + spinlock_t fdir_perfect_lock; + +#ifdef IXGBE_FCOE + struct ixgbe_fcoe fcoe; +#endif /* IXGBE_FCOE */ + u32 wol; + + u16 bd_number; + + char eeprom_id[32]; + u16 eeprom_cap; + bool netdev_registered; + u32 interrupt_event; +#ifdef HAVE_ETHTOOL_SET_PHYS_ID + u32 led_reg; +#endif + + DECLARE_BITMAP(active_vfs, IXGBE_MAX_VF_FUNCTIONS); + unsigned int num_vfs; + struct vf_data_storage *vfinfo; + int vf_rate_link_speed; + struct vf_macvlans vf_mvs; + struct vf_macvlans *mv_list; +#ifdef CONFIG_PCI_IOV + u32 timer_event_accumulator; + u32 vferr_refcount; +#endif + struct ixgbe_mac_addr *mac_table; +#ifdef IXGBE_SYSFS + struct kobject *info_kobj; + struct kobject *therm_kobj[IXGBE_MAX_SENSORS]; +#else /* IXGBE_SYSFS */ +#ifdef IXGBE_PROCFS + struct proc_dir_entry *eth_dir; + struct proc_dir_entry *info_dir; + struct proc_dir_entry *therm_dir[IXGBE_MAX_SENSORS]; + struct ixgbe_therm_proc_data therm_data[IXGBE_MAX_SENSORS]; +#endif /* IXGBE_PROCFS */ +#endif /* IXGBE_SYSFS */ +}; + +struct ixgbe_fdir_filter { + struct hlist_node fdir_node; + union ixgbe_atr_input filter; + u16 sw_idx; + u16 action; +}; + +enum ixgbe_state_t { + __IXGBE_TESTING, + __IXGBE_RESETTING, + __IXGBE_DOWN, + __IXGBE_SERVICE_SCHED, + __IXGBE_IN_SFP_INIT, +}; + +struct ixgbe_cb { +#ifdef CONFIG_IXGBE_DISABLE_PACKET_SPLIT + union { /* Union defining head/tail partner */ + struct sk_buff *head; + struct sk_buff *tail; + }; +#endif + dma_addr_t dma; +#ifndef IXGBE_NO_LRO + __be32 tsecr; /* timestamp echo response */ + u32 tsval; /* timestamp value in host order */ + u32 next_seq; /* next expected sequence number */ + u16 free; /* 65521 minus total size */ + u16 mss; /* size of data portion of packet */ +#endif /* IXGBE_NO_LRO */ +#ifdef HAVE_VLAN_RX_REGISTER + u16 vid; /* VLAN tag */ +#endif + u16 append_cnt; /* number of skb's appended */ +#ifndef CONFIG_IXGBE_DISABLE_PACKET_SPLIT + bool page_released; +#endif +}; +#define IXGBE_CB(skb) ((struct ixgbe_cb *)(skb)->cb) + +#ifdef IXGBE_SYSFS +void ixgbe_sysfs_exit(struct ixgbe_adapter *adapter); +int ixgbe_sysfs_init(struct ixgbe_adapter *adapter); +#endif /* IXGBE_SYSFS */ +#ifdef IXGBE_PROCFS +void ixgbe_procfs_exit(struct ixgbe_adapter *adapter); +int ixgbe_procfs_init(struct ixgbe_adapter *adapter); +int ixgbe_procfs_topdir_init(void); +void ixgbe_procfs_topdir_exit(void); +#endif /* IXGBE_PROCFS */ + +extern struct dcbnl_rtnl_ops dcbnl_ops; +extern int ixgbe_copy_dcb_cfg(struct ixgbe_adapter *adapter, int tc_max); + +extern u8 ixgbe_dcb_txq_to_tc(struct ixgbe_adapter *adapter, u8 index); + +/* needed by ixgbe_main.c */ +extern int ixgbe_validate_mac_addr(u8 *mc_addr); +extern void ixgbe_check_options(struct ixgbe_adapter *adapter); +extern void ixgbe_assign_netdev_ops(struct net_device *netdev); + +/* needed by ixgbe_ethtool.c */ +extern char ixgbe_driver_name[]; +extern const char ixgbe_driver_version[]; + +extern void ixgbe_up(struct ixgbe_adapter *adapter); +extern void ixgbe_down(struct ixgbe_adapter *adapter); +extern void ixgbe_reinit_locked(struct ixgbe_adapter *adapter); +extern void ixgbe_reset(struct ixgbe_adapter *adapter); +extern void ixgbe_set_ethtool_ops(struct net_device *netdev); +extern int ixgbe_setup_rx_resources(struct ixgbe_ring *); +extern int ixgbe_setup_tx_resources(struct ixgbe_ring *); +extern void ixgbe_free_rx_resources(struct ixgbe_ring *); +extern void ixgbe_free_tx_resources(struct ixgbe_ring *); +extern void ixgbe_configure_rx_ring(struct ixgbe_adapter *, + struct ixgbe_ring *); +extern void ixgbe_configure_tx_ring(struct ixgbe_adapter *, + struct ixgbe_ring *); +extern void ixgbe_update_stats(struct ixgbe_adapter *adapter); +extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter); +extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter); +extern bool ixgbe_is_ixgbe(struct pci_dev *pcidev); +extern netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *, + struct ixgbe_adapter *, + struct ixgbe_ring *); +extern void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *, + struct ixgbe_tx_buffer *); +extern void ixgbe_alloc_rx_buffers(struct ixgbe_ring *, u16); +extern void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, + struct ixgbe_ring *); +extern void ixgbe_clear_rscctl(struct ixgbe_adapter *adapter, + struct ixgbe_ring *); +extern void ixgbe_set_rx_mode(struct net_device *netdev); +extern int ixgbe_write_mc_addr_list(struct net_device *netdev); +extern int ixgbe_setup_tc(struct net_device *dev, u8 tc); +#ifdef IXGBE_FCOE +extern void ixgbe_tx_ctxtdesc(struct ixgbe_ring *, u32, u32, u32, u32); +#endif /* IXGBE_FCOE */ +extern void ixgbe_do_reset(struct net_device *netdev); +extern void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector); +extern void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter, + struct ixgbe_ring *); +extern void ixgbe_vlan_stripping_enable(struct ixgbe_adapter *adapter); +extern void ixgbe_vlan_stripping_disable(struct ixgbe_adapter *adapter); +#ifdef ETHTOOL_OPS_COMPAT +extern int ethtool_ioctl(struct ifreq *ifr); +#endif + +#ifdef IXGBE_FCOE +extern void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter); +extern int ixgbe_fso(struct ixgbe_ring *tx_ring, + struct ixgbe_tx_buffer *first, + u8 *hdr_len); +extern void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter); +extern int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter, + union ixgbe_adv_rx_desc *rx_desc, + struct sk_buff *skb); +extern int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid, + struct scatterlist *sgl, unsigned int sgc); +#ifdef HAVE_NETDEV_OPS_FCOE_DDP_TARGET +extern int ixgbe_fcoe_ddp_target(struct net_device *netdev, u16 xid, + struct scatterlist *sgl, unsigned int sgc); +#endif /* HAVE_NETDEV_OPS_FCOE_DDP_TARGET */ +extern int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid); +#ifdef HAVE_NETDEV_OPS_FCOE_ENABLE +extern int ixgbe_fcoe_enable(struct net_device *netdev); +extern int ixgbe_fcoe_disable(struct net_device *netdev); +#endif /* HAVE_NETDEV_OPS_FCOE_ENABLE */ +#ifdef CONFIG_DCB +#ifdef HAVE_DCBNL_OPS_GETAPP +extern u8 ixgbe_fcoe_getapp(struct net_device *netdev); +#endif /* HAVE_DCBNL_OPS_GETAPP */ +extern u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up); +#endif /* CONFIG_DCB */ +#ifdef HAVE_NETDEV_OPS_FCOE_GETWWN +extern int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type); +#endif +#endif /* IXGBE_FCOE */ + +#ifdef CONFIG_DCB +#ifdef HAVE_DCBNL_IEEE +s32 ixgbe_dcb_hw_ets(struct ixgbe_hw *hw, struct ieee_ets *ets, int max_frame); +#endif /* HAVE_DCBNL_IEEE */ +#endif /* CONFIG_DCB */ + +extern void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring); +extern int ixgbe_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd); +extern int ixgbe_write_uc_addr_list(struct ixgbe_adapter *adapter, + struct net_device *netdev, unsigned int vfn); +extern void ixgbe_full_sync_mac_table(struct ixgbe_adapter *adapter); +extern int ixgbe_add_mac_filter(struct ixgbe_adapter *adapter, + u8 *addr, u16 queue); +extern int ixgbe_del_mac_filter(struct ixgbe_adapter *adapter, + u8 *addr, u16 queue); +extern int ixgbe_available_rars(struct ixgbe_adapter *adapter); +#ifndef HAVE_VLAN_RX_REGISTER +extern void ixgbe_vlan_mode(struct net_device *, u32); +#endif +#ifndef ixgbe_get_netdev_tc_txq +#define ixgbe_get_netdev_tc_txq(dev, tc) (&dev->tc_to_txq[tc]) +#endif +extern void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter); +#endif /* _IXGBE_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c new file mode 100644 index 00000000..242de671 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c @@ -0,0 +1,1281 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe_type.h" +#include "ixgbe_82598.h" +#include "ixgbe_api.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg); +static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw); +static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete); +static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, bool *link_up, + bool link_up_wait_to_complete); +static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw); +static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw); +static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, + u32 headroom, int strategy); + +/** + * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout + * @hw: pointer to the HW structure + * + * The defaults for 82598 should be in the range of 50us to 50ms, + * however the hardware default for these parts is 500us to 1ms which is less + * than the 10ms recommended by the pci-e spec. To address this we need to + * increase the value to either 10ms to 250ms for capability version 1 config, + * or 16ms to 55ms for version 2. + **/ +void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) +{ + u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR); + u16 pcie_devctl2; + + /* only take action if timeout value is defaulted to 0 */ + if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK) + goto out; + + /* + * if capababilities version is type 1 we can write the + * timeout of 10ms to 250ms through the GCR register + */ + if (!(gcr & IXGBE_GCR_CAP_VER2)) { + gcr |= IXGBE_GCR_CMPL_TMOUT_10ms; + goto out; + } + + /* + * for version 2 capabilities we need to write the config space + * directly in order to set the completion timeout value for + * 16ms to 55ms + */ + pcie_devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2); + pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms; + IXGBE_WRITE_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2); +out: + /* disable completion timeout resend */ + gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND; + IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr); +} + +/** + * ixgbe_init_ops_82598 - Inits func ptrs and MAC type + * @hw: pointer to hardware structure + * + * Initialize the function pointers and assign the MAC type for 82598. + * Does not touch the hardware. + **/ +s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val; + + ret_val = ixgbe_init_phy_ops_generic(hw); + ret_val = ixgbe_init_ops_generic(hw); + + /* PHY */ + phy->ops.init = &ixgbe_init_phy_ops_82598; + + /* MAC */ + mac->ops.start_hw = &ixgbe_start_hw_82598; + mac->ops.reset_hw = &ixgbe_reset_hw_82598; + mac->ops.get_media_type = &ixgbe_get_media_type_82598; + mac->ops.get_supported_physical_layer = + &ixgbe_get_supported_physical_layer_82598; + mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82598; + mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82598; + mac->ops.set_lan_id = &ixgbe_set_lan_id_multi_port_pcie_82598; + + /* RAR, Multicast, VLAN */ + mac->ops.set_vmdq = &ixgbe_set_vmdq_82598; + mac->ops.clear_vmdq = &ixgbe_clear_vmdq_82598; + mac->ops.set_vfta = &ixgbe_set_vfta_82598; + mac->ops.set_vlvf = NULL; + mac->ops.clear_vfta = &ixgbe_clear_vfta_82598; + + /* Flow Control */ + mac->ops.fc_enable = &ixgbe_fc_enable_82598; + + mac->mcft_size = 128; + mac->vft_size = 128; + mac->num_rar_entries = 16; + mac->rx_pb_size = 512; + mac->max_tx_queues = 32; + mac->max_rx_queues = 64; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); + + /* SFP+ Module */ + phy->ops.read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598; + + /* Link */ + mac->ops.check_link = &ixgbe_check_mac_link_82598; + mac->ops.setup_link = &ixgbe_setup_mac_link_82598; + mac->ops.flap_tx_laser = NULL; + mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82598; + mac->ops.setup_rxpba = &ixgbe_set_rxpba_82598; + + /* Manageability interface */ + mac->ops.set_fw_drv_ver = NULL; + + return ret_val; +} + +/** + * ixgbe_init_phy_ops_82598 - PHY/SFP specific init + * @hw: pointer to hardware structure + * + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. + * + **/ +s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u16 list_offset, data_offset; + + /* Identify the PHY */ + phy->ops.identify(hw); + + /* Overwrite the link function pointers if copper PHY */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { + mac->ops.setup_link = &ixgbe_setup_copper_link_82598; + mac->ops.get_link_capabilities = + &ixgbe_get_copper_link_capabilities_generic; + } + + switch (hw->phy.type) { + case ixgbe_phy_tn: + phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; + phy->ops.check_link = &ixgbe_check_phy_link_tnx; + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_tnx; + break; + case ixgbe_phy_nl: + phy->ops.reset = &ixgbe_reset_phy_nl; + + /* Call SFP+ identify routine to get the SFP+ module type */ + ret_val = phy->ops.identify_sfp(hw); + if (ret_val != 0) + goto out; + else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) { + ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + + /* Check to see if SFP+ module is supported */ + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, + &list_offset, + &data_offset); + if (ret_val != 0) { + ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + break; + default: + break; + } + +out: + return ret_val; +} + +/** + * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function. + * Disables relaxed ordering Then set pcie completion timeout + * + **/ +s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) +{ + u32 regval; + u32 i; + s32 ret_val = 0; + + ret_val = ixgbe_start_hw_generic(hw); + + /* Disable relaxed ordering */ + for (i = 0; ((i < hw->mac.max_tx_queues) && + (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); + regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); + } + + for (i = 0; ((i < hw->mac.max_rx_queues) && + (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | + IXGBE_DCA_RXCTRL_HEAD_WRO_EN); + IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); + } + + /* set the completion timeout for interface */ + if (ret_val == 0) + ixgbe_set_pcie_completion_timeout(hw); + + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_82598 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value + * + * Determines the link capabilities by reading the AUTOC register. + **/ +static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + s32 status = 0; + u32 autoc = 0; + + /* + * Determine link capabilities based on the stored value of AUTOC, + * which represents EEPROM defaults. If AUTOC value has not been + * stored, use the current register value. + */ + if (hw->mac.orig_link_settings_stored) + autoc = hw->mac.orig_autoc; + else + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = false; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *autoneg = false; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = true; + break; + + case IXGBE_AUTOC_LMS_KX4_AN: + case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = true; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + break; + } + + return status; +} + +/** + * ixgbe_get_media_type_82598 - Determines media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Detect if there is a copper PHY attached. */ + switch (hw->phy.type) { + case ixgbe_phy_cu_unknown: + case ixgbe_phy_tn: + media_type = ixgbe_media_type_copper; + goto out; + default: + break; + } + + /* Media type for I82598 is based on device ID */ + switch (hw->device_id) { + case IXGBE_DEV_ID_82598: + case IXGBE_DEV_ID_82598_BX: + /* Default device ID is mezzanine card KX/KX4 */ + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_82598AF_DUAL_PORT: + case IXGBE_DEV_ID_82598AF_SINGLE_PORT: + case IXGBE_DEV_ID_82598_DA_DUAL_PORT: + case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: + case IXGBE_DEV_ID_82598EB_XF_LR: + case IXGBE_DEV_ID_82598EB_SFP_LOM: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_82598EB_CX4: + case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: + media_type = ixgbe_media_type_cx4; + break; + case IXGBE_DEV_ID_82598AT: + case IXGBE_DEV_ID_82598AT2: + media_type = ixgbe_media_type_copper; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } +out: + return media_type; +} + +/** + * ixgbe_fc_enable_82598 - Enable flow control + * @hw: pointer to hardware structure + * + * Enable flow control according to the current settings. + **/ +s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + u32 fctrl_reg; + u32 rmcs_reg; + u32 reg; + u32 fcrtl, fcrth; + u32 link_speed = 0; + int i; + bool link_up; + + /* Validate the water mark configuration */ + if (!hw->fc.pause_time) { + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* Low water mark of zero causes XOFF floods */ + for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { + if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && + hw->fc.high_water[i]) { + if (!hw->fc.low_water[i] || + hw->fc.low_water[i] >= hw->fc.high_water[i]) { + hw_dbg(hw, "Invalid water mark configuration\n"); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + } + } + + /* + * On 82598 having Rx FC on causes resets while doing 1G + * so if it's on turn it off once we know link_speed. For + * more details see 82598 Specification update. + */ + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) { + switch (hw->fc.requested_mode) { + case ixgbe_fc_full: + hw->fc.requested_mode = ixgbe_fc_tx_pause; + break; + case ixgbe_fc_rx_pause: + hw->fc.requested_mode = ixgbe_fc_none; + break; + default: + /* no change */ + break; + } + } + + /* Negotiate the fc mode to use */ + ixgbe_fc_autoneg(hw); + + /* Disable any previous flow control settings */ + fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE); + + rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS); + rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); + + /* + * The possible values of fc.current_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: Invalid. + */ + switch (hw->fc.current_mode) { + case ixgbe_fc_none: + /* + * Flow control is disabled by software override or autoneg. + * The code below will actually disable it in the HW. + */ + break; + case ixgbe_fc_rx_pause: + /* + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + fctrl_reg |= IXGBE_FCTRL_RFCE; + break; + case ixgbe_fc_tx_pause: + /* + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; + break; + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + fctrl_reg |= IXGBE_FCTRL_RFCE; + rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; + break; + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = IXGBE_ERR_CONFIG; + goto out; + break; + } + + /* Set 802.3x based flow control settings. */ + fctrl_reg |= IXGBE_FCTRL_DPF; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg); + IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); + + /* Set up and enable Rx high/low water mark thresholds, enable XON. */ + for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { + if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && + hw->fc.high_water[i]) { + fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE; + fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN; + IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl); + IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth); + } else { + IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0); + } + + } + + /* Configure pause time (2 TCs per register) */ + reg = hw->fc.pause_time * 0x00010001; + for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++) + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); + + /* Configure flow control refresh threshold value */ + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); + +out: + return ret_val; +} + +/** + * ixgbe_start_mac_link_82598 - Configures MAC link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete) +{ + u32 autoc_reg; + u32 links_reg; + u32 i; + s32 status = 0; + + /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_AN || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { + links_reg = 0; /* Just in case Autoneg time = 0 */ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autonegotiation did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + + return status; +} + +/** + * ixgbe_validate_link_ready - Function looks for phy link + * @hw: pointer to hardware structure + * + * Function indicates success when phy link is available. If phy is not ready + * within 5 seconds of MAC indicating link, the function returns error. + **/ +static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) +{ + u32 timeout; + u16 an_reg; + + if (hw->device_id != IXGBE_DEV_ID_82598AT2) + return 0; + + for (timeout = 0; + timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) { + hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &an_reg); + + if ((an_reg & IXGBE_MII_AUTONEG_COMPLETE) && + (an_reg & IXGBE_MII_AUTONEG_LINK_UP)) + break; + + msleep(100); + } + + if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) { + hw_dbg(hw, "Link was indicated but link is down\n"); + return IXGBE_ERR_LINK_SETUP; + } + + return 0; +} + +/** + * ixgbe_check_mac_link_82598 - Get link/speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true is link is up, false otherwise + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Reads the links register to determine if link is up and the current speed + **/ +static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, bool *link_up, + bool link_up_wait_to_complete) +{ + u32 links_reg; + u32 i; + u16 link_reg, adapt_comp_reg; + + /* + * SERDES PHY requires us to read link status from undocumented + * register 0xC79F. Bit 0 set indicates link is up/ready; clear + * indicates link down. OxC00C is read to check that the XAUI lanes + * are active. Bit 0 clear indicates active; set indicates inactive. + */ + if (hw->phy.type == ixgbe_phy_nl) { + hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); + hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); + hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV, + &adapt_comp_reg); + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if ((link_reg & 1) && + ((adapt_comp_reg & 1) == 0)) { + *link_up = true; + break; + } else { + *link_up = false; + } + msleep(100); + hw->phy.ops.read_reg(hw, 0xC79F, + IXGBE_TWINAX_DEV, + &link_reg); + hw->phy.ops.read_reg(hw, 0xC00C, + IXGBE_TWINAX_DEV, + &adapt_comp_reg); + } + } else { + if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0)) + *link_up = true; + else + *link_up = false; + } + + if (*link_up == false) + goto out; + } + + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if (links_reg & IXGBE_LINKS_UP) { + *link_up = true; + break; + } else { + *link_up = false; + } + msleep(100); + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + } + } else { + if (links_reg & IXGBE_LINKS_UP) + *link_up = true; + else + *link_up = false; + } + + if (links_reg & IXGBE_LINKS_SPEED) + *speed = IXGBE_LINK_SPEED_10GB_FULL; + else + *speed = IXGBE_LINK_SPEED_1GB_FULL; + + if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == true) && + (ixgbe_validate_link_ready(hw) != 0)) + *link_up = false; + +out: + return 0; +} + +/** + * ixgbe_setup_mac_link_82598 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc = curr_autoc; + u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + + /* Check to see if speed passed in is supported. */ + ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg); + speed &= link_capabilities; + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) + status = IXGBE_ERR_LINK_SETUP; + + /* Set KX4/KX support according to speed requested */ + else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { + autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK; + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + if (autoc != curr_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + } + + if (status == 0) { + /* + * Setup and restart the link based on the new values in + * ixgbe_hw This will write the AUTOC register based on the new + * stored values + */ + status = ixgbe_start_mac_link_82598(hw, + autoneg_wait_to_complete); + } + + return status; +} + + +/** + * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true if waiting is needed to complete + * + * Sets the link speed in the AUTOC register in the MAC and restarts link. + **/ +static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status; + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); + /* Set up MAC */ + ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); + + return status; +} + +/** + * ixgbe_reset_hw_82598 - Performs hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks and + * clears all interrupts, performing a PHY reset, and performing a link (MAC) + * reset. + **/ +static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) +{ + s32 status = 0; + s32 phy_status = 0; + u32 ctrl; + u32 gheccr; + u32 i; + u32 autoc; + u8 analog_val; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + status = hw->mac.ops.stop_adapter(hw); + if (status != 0) + goto reset_hw_out; + + /* + * Power up the Atlas Tx lanes if they are currently powered down. + * Atlas Tx lanes are powered down for MAC loopback tests, but + * they are not automatically restored on reset. + */ + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val); + if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) { + /* Enable Tx Atlas so packets can be transmitted again */ + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, + analog_val); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, + analog_val); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, + analog_val); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, + analog_val); + } + + /* Reset PHY */ + if (hw->phy.reset_disable == false) { + /* PHY ops must be identified and initialized prior to reset */ + + /* Init PHY and function pointers, perform SFP setup */ + phy_status = hw->phy.ops.init(hw); + if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT) + goto mac_reset_top; + + hw->phy.ops.reset(hw); + } + +mac_reset_top: + /* + * Issue global reset to the MAC. This needs to be a SW reset. + * If link reset is used, it might reset the MAC when mng is using it + */ + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST; + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST)) + break; + } + if (ctrl & IXGBE_CTRL_RST) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + + msleep(50); + + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR); + gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6)); + IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr); + + /* + * Store the original AUTOC value if it has not been + * stored off yet. Otherwise restore the stored original + * AUTOC value since the reset operation sets back to deaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + if (hw->mac.orig_link_settings_stored == false) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_link_settings_stored = true; + } else if (autoc != hw->mac.orig_autoc) { + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc); + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table + */ + hw->mac.ops.init_rx_addrs(hw); + +reset_hw_out: + if (phy_status != 0) + status = phy_status; + + return status; +} + +/** + * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq set index + **/ +s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); + rar_high &= ~IXGBE_RAH_VIND_MASK; + rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK); + IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); + return 0; +} + +/** + * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq clear index (not used in 82598, but elsewhere) + **/ +static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); + if (rar_high & IXGBE_RAH_VIND_MASK) { + rar_high &= ~IXGBE_RAH_VIND_MASK; + IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); + } + + return 0; +} + +/** + * ixgbe_set_vfta_82598 - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFTA + * @vlan_on: boolean flag to turn on/off VLAN in VFTA + * + * Turn on/off specified VLAN in the VLAN filter table. + **/ +s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on) +{ + u32 regindex; + u32 bitindex; + u32 bits; + u32 vftabyte; + + if (vlan > 4095) + return IXGBE_ERR_PARAM; + + /* Determine 32-bit word position in array */ + regindex = (vlan >> 5) & 0x7F; /* upper seven bits */ + + /* Determine the location of the (VMD) queue index */ + vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */ + bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */ + + /* Set the nibble for VMD queue index */ + bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex)); + bits &= (~(0x0F << bitindex)); + bits |= (vind << bitindex); + IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits); + + /* Determine the location of the bit for this VLAN id */ + bitindex = vlan & 0x1F; /* lower five bits */ + + bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); + if (vlan_on) + /* Turn on this VLAN id */ + bits |= (1 << bitindex); + else + /* Turn off this VLAN id */ + bits &= ~(1 << bitindex); + IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); + + return 0; +} + +/** + * ixgbe_clear_vfta_82598 - Clear VLAN filter table + * @hw: pointer to hardware structure + * + * Clears the VLAN filer table, and the VMDq index associated with the filter + **/ +static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) +{ + u32 offset; + u32 vlanbyte; + + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); + + for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), + 0); + + return 0; +} + +/** + * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value + * + * Performs read operation to Atlas analog register specified. + **/ +s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) +{ + u32 atlas_ctl; + + IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, + IXGBE_ATLASCTL_WRITE_CMD | (reg << 8)); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); + *val = (u8)atlas_ctl; + + return 0; +} + +/** + * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write + * + * Performs write operation to Atlas analog register specified. + **/ +s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) +{ + u32 atlas_ctl; + + atlas_ctl = (reg << 8) | val; + IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + + return 0; +} + +/** + * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data) +{ + s32 status = 0; + u16 sfp_addr = 0; + u16 sfp_data = 0; + u16 sfp_stat = 0; + u32 i; + + if (hw->phy.type == ixgbe_phy_nl) { + /* + * NetLogic phy SDA/SCL registers are at addresses 0xC30A to + * 0xC30D. These registers are used to talk to the SFP+ + * module's EEPROM through the SDA/SCL (I2C) interface. + */ + sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset; + sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); + hw->phy.ops.write_reg(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + sfp_addr); + + /* Poll status */ + for (i = 0; i < 100; i++) { + hw->phy.ops.read_reg(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &sfp_stat); + sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; + if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) + break; + msleep(10); + } + + if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) { + hw_dbg(hw, "EEPROM read did not pass.\n"); + status = IXGBE_ERR_SFP_NOT_PRESENT; + goto out; + } + + /* Read data */ + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data); + + *eeprom_data = (u8)(sfp_data >> 8); + } else { + status = IXGBE_ERR_PHY; + goto out; + } + +out: + return status; +} + +/** + * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u16 ext_ability = 0; + + hw->phy.ops.identify(hw); + + /* Copper PHY must be checked before AUTOC LMS to determine correct + * physical layer because 10GBase-T PHYs use LMS = KX4/KX */ + switch (hw->phy.type) { + case ixgbe_phy_tn: + case ixgbe_phy_cu_unknown: + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); + if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + goto out; + default: + break; + } + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_AN: + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + if (pma_pmd_1g == IXGBE_AUTOC_1G_KX) + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; + else + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX; + break; + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; + else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + else /* XAUI */ + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + break; + case IXGBE_AUTOC_LMS_KX4_AN: + case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: + if (autoc & IXGBE_AUTOC_KX_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + break; + default: + break; + } + + if (hw->phy.type == ixgbe_phy_nl) { + hw->phy.ops.identify_sfp(hw); + + switch (hw->phy.sfp_type) { + case ixgbe_sfp_type_da_cu: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_sfp_type_sr: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + break; + case ixgbe_sfp_type_lr: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; + default: + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + break; + } + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_82598_DA_DUAL_PORT: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case IXGBE_DEV_ID_82598AF_DUAL_PORT: + case IXGBE_DEV_ID_82598AF_SINGLE_PORT: + case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + break; + case IXGBE_DEV_ID_82598EB_XF_LR: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; + default: + break; + } + +out: + return physical_layer; +} + +/** + * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple + * port devices. + * @hw: pointer to the HW structure + * + * Calls common function and corrects issue with some single port devices + * that enable LAN1 but not LAN0. + **/ +void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_bus_info *bus = &hw->bus; + u16 pci_gen = 0; + u16 pci_ctrl2 = 0; + + ixgbe_set_lan_id_multi_port_pcie(hw); + + /* check if LAN0 is disabled */ + hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen); + if ((pci_gen != 0) && (pci_gen != 0xFFFF)) { + + hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2); + + /* if LAN0 is completely disabled force function to 0 */ + if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) && + !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) && + !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) { + + bus->func = 0; + } + } +} + +/** + * ixgbe_set_rxpba_82598 - Initialize RX packet buffer + * @hw: pointer to hardware structure + * @num_pb: number of packet buffers to allocate + * @headroom: reserve n KB of headroom + * @strategy: packet buffer allocation strategy + **/ +static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, + u32 headroom, int strategy) +{ + u32 rxpktsize = IXGBE_RXPBSIZE_64KB; + u8 i = 0; + + if (!num_pb) + return; + + /* Setup Rx packet buffer sizes */ + switch (strategy) { + case PBA_STRATEGY_WEIGHTED: + /* Setup the first four at 80KB */ + rxpktsize = IXGBE_RXPBSIZE_80KB; + for (; i < 4; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); + /* Setup the last four at 48KB...don't re-init i */ + rxpktsize = IXGBE_RXPBSIZE_48KB; + /* Fall Through */ + case PBA_STRATEGY_EQUAL: + default: + /* Divide the remaining Rx packet buffer evenly among the TCs */ + for (; i < IXGBE_MAX_PACKET_BUFFERS; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); + break; + } + + /* Setup Tx packet buffer sizes */ + for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) + IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB); + + return; +} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.h new file mode 100644 index 00000000..9a8c670a --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_82598_H_ +#define _IXGBE_82598_H_ + +u32 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw); +s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw); +s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw); +s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on); +s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val); +s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val); +s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data); +u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw); +s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw); +void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw); +void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw); +#endif /* _IXGBE_82598_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.c new file mode 100644 index 00000000..3f159123 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.c @@ -0,0 +1,2299 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe_type.h" +#include "ixgbe_82599.h" +#include "ixgbe_api.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); +static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, + u16 offset, u16 *data); +static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); + +void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + /* enable the laser control functions for SFP+ fiber */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) { + mac->ops.disable_tx_laser = + &ixgbe_disable_tx_laser_multispeed_fiber; + mac->ops.enable_tx_laser = + &ixgbe_enable_tx_laser_multispeed_fiber; + mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber; + + } else { + mac->ops.disable_tx_laser = NULL; + mac->ops.enable_tx_laser = NULL; + mac->ops.flap_tx_laser = NULL; + } + + if (hw->phy.multispeed_fiber) { + /* Set up dual speed SFP+ support */ + mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; + } else { + if ((ixgbe_get_media_type(hw) == ixgbe_media_type_backplane) && + (hw->phy.smart_speed == ixgbe_smart_speed_auto || + hw->phy.smart_speed == ixgbe_smart_speed_on) && + !ixgbe_verify_lesm_fw_enabled_82599(hw)) { + mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed; + } else { + mac->ops.setup_link = &ixgbe_setup_mac_link_82599; + } + } +} + +/** + * ixgbe_init_phy_ops_82599 - PHY/SFP specific init + * @hw: pointer to hardware structure + * + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. + * + **/ +s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u32 esdp; + + if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) { + /* Store flag indicating I2C bus access control unit. */ + hw->phy.qsfp_shared_i2c_bus = TRUE; + + /* Initialize access to QSFP+ I2C bus */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= IXGBE_ESDP_SDP0_DIR; + esdp &= ~IXGBE_ESDP_SDP1_DIR; + esdp &= ~IXGBE_ESDP_SDP0; + esdp &= ~IXGBE_ESDP_SDP0_NATIVE; + esdp &= ~IXGBE_ESDP_SDP1_NATIVE; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599; + phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599; + } + /* Identify the PHY or SFP module */ + ret_val = phy->ops.identify(hw); + if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto init_phy_ops_out; + + /* Setup function pointers based on detected SFP module and speeds */ + ixgbe_init_mac_link_ops_82599(hw); + if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) + hw->phy.ops.reset = NULL; + + /* If copper media, overwrite with copper function pointers */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { + mac->ops.setup_link = &ixgbe_setup_copper_link_82599; + mac->ops.get_link_capabilities = + &ixgbe_get_copper_link_capabilities_generic; + } + + /* Set necessary function pointers based on phy type */ + switch (hw->phy.type) { + case ixgbe_phy_tn: + phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; + phy->ops.check_link = &ixgbe_check_phy_link_tnx; + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_tnx; + break; + default: + break; + } +init_phy_ops_out: + return ret_val; +} + +s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + u32 reg_anlp1 = 0; + u32 i = 0; + u16 list_offset, data_offset, data_value; + + if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { + ixgbe_init_mac_link_ops_82599(hw); + + hw->phy.ops.reset = NULL; + + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + if (ret_val != 0) + goto setup_sfp_out; + + /* PHY config will finish before releasing the semaphore */ + ret_val = hw->mac.ops.acquire_swfw_sync(hw, + IXGBE_GSSR_MAC_CSR_SM); + if (ret_val != 0) { + ret_val = IXGBE_ERR_SWFW_SYNC; + goto setup_sfp_out; + } + + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + while (data_value != 0xffff) { + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); + IXGBE_WRITE_FLUSH(hw); + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + } + + /* Release the semaphore */ + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); + /* Delay obtaining semaphore again to allow FW access */ + msleep(hw->eeprom.semaphore_delay); + + /* Now restart DSP by setting Restart_AN and clearing LMS */ + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw, + IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) | + IXGBE_AUTOC_AN_RESTART)); + + /* Wait for AN to leave state 0 */ + for (i = 0; i < 10; i++) { + msleep(4); + reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1); + if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK) + break; + } + if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) { + hw_dbg(hw, "sfp module setup not complete\n"); + ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; + goto setup_sfp_out; + } + + /* Restart DSP by setting Restart_AN and return to SFI mode */ + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw, + IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL | + IXGBE_AUTOC_AN_RESTART)); + } + +setup_sfp_out: + return ret_val; +} + +/** + * ixgbe_init_ops_82599 - Inits func ptrs and MAC type + * @hw: pointer to hardware structure + * + * Initialize the function pointers and assign the MAC type for 82599. + * Does not touch the hardware. + **/ + +s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + s32 ret_val; + + ixgbe_init_phy_ops_generic(hw); + ret_val = ixgbe_init_ops_generic(hw); + + /* PHY */ + phy->ops.identify = &ixgbe_identify_phy_82599; + phy->ops.init = &ixgbe_init_phy_ops_82599; + + /* MAC */ + mac->ops.reset_hw = &ixgbe_reset_hw_82599; + mac->ops.get_media_type = &ixgbe_get_media_type_82599; + mac->ops.get_supported_physical_layer = + &ixgbe_get_supported_physical_layer_82599; + mac->ops.disable_sec_rx_path = &ixgbe_disable_sec_rx_path_generic; + mac->ops.enable_sec_rx_path = &ixgbe_enable_sec_rx_path_generic; + mac->ops.enable_rx_dma = &ixgbe_enable_rx_dma_82599; + mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82599; + mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82599; + mac->ops.start_hw = &ixgbe_start_hw_82599; + mac->ops.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic; + mac->ops.set_san_mac_addr = &ixgbe_set_san_mac_addr_generic; + mac->ops.get_device_caps = &ixgbe_get_device_caps_generic; + mac->ops.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic; + mac->ops.get_fcoe_boot_status = &ixgbe_get_fcoe_boot_status_generic; + + /* RAR, Multicast, VLAN */ + mac->ops.set_vmdq = &ixgbe_set_vmdq_generic; + mac->ops.set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic; + mac->ops.clear_vmdq = &ixgbe_clear_vmdq_generic; + mac->ops.insert_mac_addr = &ixgbe_insert_mac_addr_generic; + mac->rar_highwater = 1; + mac->ops.set_vfta = &ixgbe_set_vfta_generic; + mac->ops.set_vlvf = &ixgbe_set_vlvf_generic; + mac->ops.clear_vfta = &ixgbe_clear_vfta_generic; + mac->ops.init_uta_tables = &ixgbe_init_uta_tables_generic; + mac->ops.setup_sfp = &ixgbe_setup_sfp_modules_82599; + mac->ops.set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing; + mac->ops.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing; + + /* Link */ + mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82599; + mac->ops.check_link = &ixgbe_check_mac_link_generic; + mac->ops.setup_rxpba = &ixgbe_set_rxpba_generic; + ixgbe_init_mac_link_ops_82599(hw); + + mac->mcft_size = 128; + mac->vft_size = 128; + mac->num_rar_entries = 128; + mac->rx_pb_size = 512; + mac->max_tx_queues = 128; + mac->max_rx_queues = 128; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); + + mac->arc_subsystem_valid = (IXGBE_READ_REG(hw, IXGBE_FWSM) & + IXGBE_FWSM_MODE_MASK) ? true : false; + + //hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf; + + /* EEPROM */ + eeprom->ops.read = &ixgbe_read_eeprom_82599; + eeprom->ops.read_buffer = &ixgbe_read_eeprom_buffer_82599; + + /* Manageability interface */ + mac->ops.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic; + + mac->ops.get_thermal_sensor_data = + &ixgbe_get_thermal_sensor_data_generic; + mac->ops.init_thermal_sensor_thresh = + &ixgbe_init_thermal_sensor_thresh_generic; + + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_82599 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @negotiation: true when autoneg or autotry is enabled + * + * Determines the link capabilities by reading the AUTOC register. + **/ +s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *negotiation) +{ + s32 status = 0; + u32 autoc = 0; + + /* Check if 1G SFP module. */ + if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + goto out; + } + + /* + * Determine link capabilities based on the stored value of AUTOC, + * which represents EEPROM defaults. If AUTOC value has not + * been stored, use the current register values. + */ + if (hw->mac.orig_link_settings_stored) + autoc = hw->mac.orig_autoc; + else + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_10G_SERIAL: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: + *speed = IXGBE_LINK_SPEED_100_FULL; + if (autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_SGMII_1G_100M: + *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; + *negotiation = false; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + goto out; + break; + } + + if (hw->phy.multispeed_fiber) { + *speed |= IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + } + +out: + return status; +} + +/** + * ixgbe_get_media_type_82599 - Get media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Detect if there is a copper PHY attached. */ + switch (hw->phy.type) { + case ixgbe_phy_cu_unknown: + case ixgbe_phy_tn: + media_type = ixgbe_media_type_copper; + goto out; + default: + break; + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_KX4: + case IXGBE_DEV_ID_82599_KX4_MEZZ: + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: + case IXGBE_DEV_ID_82599_KR: + case IXGBE_DEV_ID_82599_BACKPLANE_FCOE: + case IXGBE_DEV_ID_82599_XAUI_LOM: + /* Default device ID is mezzanine card KX/KX4 */ + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_82599_SFP: + case IXGBE_DEV_ID_82599_SFP_FCOE: + case IXGBE_DEV_ID_82599_SFP_EM: + case IXGBE_DEV_ID_82599_SFP_SF2: + case IXGBE_DEV_ID_82599EN_SFP: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_82599_CX4: + media_type = ixgbe_media_type_cx4; + break; + case IXGBE_DEV_ID_82599_T3_LOM: + media_type = ixgbe_media_type_copper; + break; + case IXGBE_DEV_ID_82599_LS: + media_type = ixgbe_media_type_fiber_lco; + break; + case IXGBE_DEV_ID_82599_QSFP_SF_QP: + media_type = ixgbe_media_type_fiber_qsfp; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } +out: + return media_type; +} + +/** + * ixgbe_start_mac_link_82599 - Setup MAC link settings + * @hw: pointer to hardware structure + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete) +{ + u32 autoc_reg; + u32 links_reg = 0; + u32 i; + s32 status = 0; + + /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + + return status; +} + +/** + * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively shutting down the Tx + * laser on the PHY, effectively halting physical link. + **/ +void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* Disable tx laser; allow 100us to go dark per spec */ + esdp_reg |= IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + udelay(100); +} + +/** + * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively turning on the Tx + * laser on the PHY, effectively starting physical link. + **/ +void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* Enable tx laser; allow 100ms to light up */ + esdp_reg &= ~IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + msleep(100); +} + +/** + * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser + * @hw: pointer to hardware structure + * + * When the driver changes the link speeds that it can support, + * it sets autotry_restart to true to indicate that we need to + * initiate a new autotry session with the link partner. To do + * so, we set the speed then disable and re-enable the tx laser, to + * alert the link partner that it also needs to restart autotry on its + * end. This is consistent with true clause 37 autoneg, which also + * involves a loss of signal. + **/ +void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + if (hw->mac.autotry_restart) { + ixgbe_disable_tx_laser_multispeed_fiber(hw); + ixgbe_enable_tx_laser_multispeed_fiber(hw); + hw->mac.autotry_restart = false; + } +} + +/** + * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; + ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; + u32 speedcnt = 0; + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + u32 i = 0; + bool link_up = false; + bool negotiation; + + /* Mask off requested but non-supported speeds */ + status = ixgbe_get_link_capabilities(hw, &link_speed, &negotiation); + if (status != 0) + return status; + + speed &= link_speed; + + /* + * Try each speed one by one, highest priority first. We do this in + * software because 10gb fiber doesn't support speed autonegotiation. + */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + speedcnt++; + highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = ixgbe_check_link(hw, &link_speed, &link_up, false); + if (status != 0) + return status; + + if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up) + goto out; + + /* Set the module link speed */ + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + + /* Allow module to change analog characteristics (1G->10G) */ + msleep(40); + + status = ixgbe_setup_mac_link_82599(hw, + IXGBE_LINK_SPEED_10GB_FULL, + autoneg, + autoneg_wait_to_complete); + if (status != 0) + return status; + + /* Flap the tx laser if it has not already been done */ + ixgbe_flap_tx_laser(hw); + + /* + * Wait for the controller to acquire link. Per IEEE 802.3ap, + * Section 73.10.2, we may have to wait up to 500ms if KR is + * attempted. 82599 uses the same timing for 10g SFI. + */ + for (i = 0; i < 5; i++) { + /* Wait for the link partner to also set speed */ + msleep(100); + + /* If we have link, just jump out */ + status = ixgbe_check_link(hw, &link_speed, + &link_up, false); + if (status != 0) + return status; + + if (link_up) + goto out; + } + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + speedcnt++; + if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) + highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = ixgbe_check_link(hw, &link_speed, &link_up, false); + if (status != 0) + return status; + + if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up) + goto out; + + /* Set the module link speed */ + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + + /* Allow module to change analog characteristics (10G->1G) */ + msleep(40); + + status = ixgbe_setup_mac_link_82599(hw, + IXGBE_LINK_SPEED_1GB_FULL, + autoneg, + autoneg_wait_to_complete); + if (status != 0) + return status; + + /* Flap the tx laser if it has not already been done */ + ixgbe_flap_tx_laser(hw); + + /* Wait for the link partner to also set speed */ + msleep(100); + + /* If we have link, just jump out */ + status = ixgbe_check_link(hw, &link_speed, &link_up, false); + if (status != 0) + return status; + + if (link_up) + goto out; + } + + /* + * We didn't get link. Configure back to the highest speed we tried, + * (if there was more than one). We call ourselves back with just the + * single highest speed that the user requested. + */ + if (speedcnt > 1) + status = ixgbe_setup_mac_link_multispeed_fiber(hw, + highest_link_speed, autoneg, autoneg_wait_to_complete); + +out: + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + return status; +} + +/** + * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Implements the Intel SmartSpeed algorithm. + **/ +s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; + s32 i, j; + bool link_up = false; + u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + if (speed & IXGBE_LINK_SPEED_100_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; + + /* + * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the + * autoneg advertisement if link is unable to be established at the + * highest negotiated rate. This can sometimes happen due to integrity + * issues with the physical media connection. + */ + + /* First, try to get link with full advertisement */ + hw->phy.smart_speed_active = false; + for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + if (status != 0) + goto out; + + /* + * Wait for the controller to acquire link. Per IEEE 802.3ap, + * Section 73.10.2, we may have to wait up to 500ms if KR is + * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per + * Table 9 in the AN MAS. + */ + for (i = 0; i < 5; i++) { + msleep(100); + + /* If we have link, just jump out */ + status = ixgbe_check_link(hw, &link_speed, &link_up, + false); + if (status != 0) + goto out; + + if (link_up) + goto out; + } + } + + /* + * We didn't get link. If we advertised KR plus one of KX4/KX + * (or BX4/BX), then disable KR and try again. + */ + if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) || + ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0)) + goto out; + + /* Turn SmartSpeed on to disable KR support */ + hw->phy.smart_speed_active = true; + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + if (status != 0) + goto out; + + /* + * Wait for the controller to acquire link. 600ms will allow for + * the AN link_fail_inhibit_timer as well for multiple cycles of + * parallel detect, both 10g and 1g. This allows for the maximum + * connect attempts as defined in the AN MAS table 73-7. + */ + for (i = 0; i < 6; i++) { + msleep(100); + + /* If we have link, just jump out */ + status = ixgbe_check_link(hw, &link_speed, &link_up, false); + if (status != 0) + goto out; + + if (link_up) + goto out; + } + + /* We didn't get link. Turn SmartSpeed back off. */ + hw->phy.smart_speed_active = false; + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + +out: + if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL)) + hw_dbg(hw, "Smartspeed has downgraded the link speed " + "from the maximum advertised\n"); + return status; +} + +/** + * ixgbe_setup_mac_link_82599 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 start_autoc = autoc; + u32 orig_autoc = 0; + u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 links_reg = 0; + u32 i; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + + /* Check to see if speed passed in is supported. */ + status = ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg); + if (status != 0) + goto out; + + speed &= link_capabilities; + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) { + status = IXGBE_ERR_LINK_SETUP; + goto out; + } + + /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/ + if (hw->mac.orig_link_settings_stored) + orig_autoc = hw->mac.orig_autoc; + else + orig_autoc = autoc; + + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + /* Set KX4/KX/KR support according to speed requested */ + autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + if (orig_autoc & IXGBE_AUTOC_KX4_SUPP) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) && + (hw->phy.smart_speed_active == false)) + autoc |= IXGBE_AUTOC_KR_SUPP; + } + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || + link_mode == IXGBE_AUTOC_LMS_1G_AN)) { + /* Switch from 1G SFI to 10G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && + (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; + } + } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { + /* Switch from 10G SFI to 1G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && + (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + if (autoneg) + autoc |= IXGBE_AUTOC_LMS_1G_AN; + else + autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; + } + } + + if (autoc != start_autoc) { + /* Restart link */ + autoc |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = + IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = + IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + } + +out: + return status; +} + +/** + * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true if waiting is needed to complete + * + * Restarts link on PHY and MAC based on settings passed in. + **/ +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status; + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); + /* Set up MAC */ + ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); + + return status; +} + +/** + * ixgbe_reset_hw_82599 - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) +{ +// ixgbe_link_speed link_speed; + s32 status = 0; +// u32 ctrl, i, autoc, autoc2; +// bool link_up = false; + +#if 0 + /* Call adapter stop to disable tx/rx and clear interrupts */ + status = hw->mac.ops.stop_adapter(hw); + if (status != 0) + goto reset_hw_out; + + /* flush pending Tx transactions */ + ixgbe_clear_tx_pending(hw); + + /* PHY ops must be identified and initialized prior to reset */ + + /* Identify PHY and related function pointers */ + status = hw->phy.ops.init(hw); + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + + /* Setup SFP module if there is one present. */ + if (hw->phy.sfp_setup_needed) { + status = hw->mac.ops.setup_sfp(hw); + hw->phy.sfp_setup_needed = false; + } + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + + /* Reset PHY */ + if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL) + hw->phy.ops.reset(hw); + +mac_reset_top: + /* + * Issue global reset to the MAC. Needs to be SW reset if link is up. + * If link reset is used when link is up, it might reset the PHY when + * mng is using it. If link is down or the flag to force full link + * reset is set, then perform link reset. + */ + ctrl = IXGBE_CTRL_LNK_RST; + if (!hw->force_full_reset) { + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up) + ctrl = IXGBE_CTRL_RST; + } + + ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST_MASK)) + break; + } + + if (ctrl & IXGBE_CTRL_RST_MASK) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + + msleep(50); + + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + /* + * Store the original AUTOC/AUTOC2 values if they have not been + * stored off yet. Otherwise restore the stored original + * values since the reset operation sets back to defaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + if (hw->mac.orig_link_settings_stored == false) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_autoc2 = autoc2; + hw->mac.orig_link_settings_stored = true; + } else { + if (autoc != hw->mac.orig_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc | + IXGBE_AUTOC_AN_RESTART)); + + if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != + (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { + autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; + autoc2 |= (hw->mac.orig_autoc2 & + IXGBE_AUTOC2_UPPER_MASK); + IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); + } + } +#endif + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = 128; + hw->mac.ops.init_rx_addrs(hw); + + /* Store the permanent SAN mac address */ + hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); + + /* Add the SAN MAC address to the RAR only if it's a valid address */ + if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { + hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, + hw->mac.san_addr, 0, IXGBE_RAH_AV); + + /* Save the SAN MAC RAR index */ + hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1; + + /* Reserve the last RAR for the SAN MAC address */ + hw->mac.num_rar_entries--; + } + + /* Store the alternative WWNN/WWPN prefix */ + hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, + &hw->mac.wwpn_prefix); + +//reset_hw_out: + return status; +} + +/** + * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) +{ + int i; + u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); + fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; + + /* + * Before starting reinitialization process, + * FDIRCMD.CMD must be zero. + */ + for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) { + if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & + IXGBE_FDIRCMD_CMD_MASK)) + break; + udelay(10); + } + if (i >= IXGBE_FDIRCMD_CMD_POLL) { + hw_dbg(hw, "Flow Director previous command isn't complete, " + "aborting table re-initialization.\n"); + return IXGBE_ERR_FDIR_REINIT_FAILED; + } + + IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0); + IXGBE_WRITE_FLUSH(hw); + /* + * 82599 adapters flow director init flow cannot be restarted, + * Workaround 82599 silicon errata by performing the following steps + * before re-writing the FDIRCTRL control register with the same value. + * - write 1 to bit 8 of FDIRCMD register & + * - write 0 to bit 8 of FDIRCMD register + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) | + IXGBE_FDIRCMD_CLEARHT)); + IXGBE_WRITE_FLUSH(hw); + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & + ~IXGBE_FDIRCMD_CLEARHT)); + IXGBE_WRITE_FLUSH(hw); + /* + * Clear FDIR Hash register to clear any leftover hashes + * waiting to be programmed. + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00); + IXGBE_WRITE_FLUSH(hw); + + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll init-done after we write FDIRCTRL register */ + for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { + if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & + IXGBE_FDIRCTRL_INIT_DONE) + break; + udelay(10); + } + if (i >= IXGBE_FDIR_INIT_DONE_POLL) { + hw_dbg(hw, "Flow Director Signature poll time exceeded!\n"); + return IXGBE_ERR_FDIR_REINIT_FAILED; + } + + /* Clear FDIR statistics registers (read to clear) */ + IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT); + IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT); + IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); + IXGBE_READ_REG(hw, IXGBE_FDIRMISS); + IXGBE_READ_REG(hw, IXGBE_FDIRLEN); + + return 0; +} + +/** + * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register + **/ +static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) +{ + int i; + + /* Prime the keys for hashing */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY); + IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY); + + /* + * Poll init-done after we write the register. Estimated times: + * 10G: PBALLOC = 11b, timing is 60us + * 1G: PBALLOC = 11b, timing is 600us + * 100M: PBALLOC = 11b, timing is 6ms + * + * Multiple these timings by 4 if under full Rx load + * + * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for + * 1 msec per poll time. If we're at line rate and drop to 100M, then + * this might not finish in our poll time, but we can live with that + * for now. + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + IXGBE_WRITE_FLUSH(hw); + for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { + if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & + IXGBE_FDIRCTRL_INIT_DONE) + break; + msleep(1); + } + + if (i >= IXGBE_FDIR_INIT_DONE_POLL) + hw_dbg(hw, "Flow Director poll time exceeded!\n"); +} + +/** + * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register, initially + * contains just the value of the Rx packet buffer allocation + **/ +s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) +{ + /* + * Continue setup of fdirctrl register bits: + * Move the flexible bytes to use the ethertype - shift 6 words + * Set the maximum length per hash bucket to 0xA filters + * Send interrupt when 64 filters are left + */ + fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | + (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | + (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); + + /* write hashes and fdirctrl register, poll for completion */ + ixgbe_fdir_enable_82599(hw, fdirctrl); + + return 0; +} + +/** + * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register, initially + * contains just the value of the Rx packet buffer allocation + **/ +s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl) +{ + /* + * Continue setup of fdirctrl register bits: + * Turn perfect match filtering on + * Report hash in RSS field of Rx wb descriptor + * Initialize the drop queue + * Move the flexible bytes to use the ethertype - shift 6 words + * Set the maximum length per hash bucket to 0xA filters + * Send interrupt when 64 (0x4 * 16) filters are left + */ + fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH | + IXGBE_FDIRCTRL_REPORT_STATUS | + (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) | + (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | + (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | + (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); + + /* write hashes and fdirctrl register, poll for completion */ + ixgbe_fdir_enable_82599(hw, fdirctrl); + + return 0; +} + +/* + * These defines allow us to quickly generate all of the necessary instructions + * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION + * for values 0 through 15 + */ +#define IXGBE_ATR_COMMON_HASH_KEY \ + (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY) +#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \ +do { \ + u32 n = (_n); \ + if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \ + common_hash ^= lo_hash_dword >> n; \ + else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ + bucket_hash ^= lo_hash_dword >> n; \ + else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \ + sig_hash ^= lo_hash_dword << (16 - n); \ + if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \ + common_hash ^= hi_hash_dword >> n; \ + else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ + bucket_hash ^= hi_hash_dword >> n; \ + else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \ + sig_hash ^= hi_hash_dword << (16 - n); \ +} while (0); + +/** + * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash + * @stream: input bitstream to compute the hash on + * + * This function is almost identical to the function above but contains + * several optomizations such as unwinding all of the loops, letting the + * compiler work out all of the conditional ifs since the keys are static + * defines, and computing two keys at once since the hashed dword stream + * will be the same for both keys. + **/ +u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, + union ixgbe_atr_hash_dword common) +{ + u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; + u32 sig_hash = 0, bucket_hash = 0, common_hash = 0; + + /* record the flow_vm_vlan bits as they are a key part to the hash */ + flow_vm_vlan = IXGBE_NTOHL(input.dword); + + /* generate common hash dword */ + hi_hash_dword = IXGBE_NTOHL(common.dword); + + /* low dword is word swapped version of common */ + lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); + + /* apply flow ID/VM pool/VLAN ID bits to hash words */ + hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); + + /* Process bits 0 and 16 */ + IXGBE_COMPUTE_SIG_HASH_ITERATION(0); + + /* + * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to + * delay this because bit 0 of the stream should not be processed + * so we do not add the vlan until after bit 0 was processed + */ + lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); + + /* Process remaining 30 bit of the key */ + IXGBE_COMPUTE_SIG_HASH_ITERATION(1); + IXGBE_COMPUTE_SIG_HASH_ITERATION(2); + IXGBE_COMPUTE_SIG_HASH_ITERATION(3); + IXGBE_COMPUTE_SIG_HASH_ITERATION(4); + IXGBE_COMPUTE_SIG_HASH_ITERATION(5); + IXGBE_COMPUTE_SIG_HASH_ITERATION(6); + IXGBE_COMPUTE_SIG_HASH_ITERATION(7); + IXGBE_COMPUTE_SIG_HASH_ITERATION(8); + IXGBE_COMPUTE_SIG_HASH_ITERATION(9); + IXGBE_COMPUTE_SIG_HASH_ITERATION(10); + IXGBE_COMPUTE_SIG_HASH_ITERATION(11); + IXGBE_COMPUTE_SIG_HASH_ITERATION(12); + IXGBE_COMPUTE_SIG_HASH_ITERATION(13); + IXGBE_COMPUTE_SIG_HASH_ITERATION(14); + IXGBE_COMPUTE_SIG_HASH_ITERATION(15); + + /* combine common_hash result with signature and bucket hashes */ + bucket_hash ^= common_hash; + bucket_hash &= IXGBE_ATR_HASH_MASK; + + sig_hash ^= common_hash << 16; + sig_hash &= IXGBE_ATR_HASH_MASK << 16; + + /* return completed signature hash */ + return sig_hash ^ bucket_hash; +} + +/** + * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter + * @hw: pointer to hardware structure + * @input: unique input dword + * @common: compressed common input dword + * @queue: queue index to direct traffic to + **/ +s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_hash_dword input, + union ixgbe_atr_hash_dword common, + u8 queue) +{ + u64 fdirhashcmd; + u32 fdircmd; + + /* + * Get the flow_type in order to program FDIRCMD properly + * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 + */ + switch (input.formatted.flow_type) { + case IXGBE_ATR_FLOW_TYPE_TCPV4: + case IXGBE_ATR_FLOW_TYPE_UDPV4: + case IXGBE_ATR_FLOW_TYPE_SCTPV4: + case IXGBE_ATR_FLOW_TYPE_TCPV6: + case IXGBE_ATR_FLOW_TYPE_UDPV6: + case IXGBE_ATR_FLOW_TYPE_SCTPV6: + break; + default: + hw_dbg(hw, " Error on flow type input\n"); + return IXGBE_ERR_CONFIG; + } + + /* configure FDIRCMD register */ + fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | + IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; + fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; + fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; + + /* + * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits + * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH. + */ + fdirhashcmd = (u64)fdircmd << 32; + fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common); + IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd); + + hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd); + + return 0; +} + +#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \ +do { \ + u32 n = (_n); \ + if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ + bucket_hash ^= lo_hash_dword >> n; \ + if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ + bucket_hash ^= hi_hash_dword >> n; \ +} while (0); + +/** + * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash + * @atr_input: input bitstream to compute the hash on + * @input_mask: mask for the input bitstream + * + * This function serves two main purposes. First it applys the input_mask + * to the atr_input resulting in a cleaned up atr_input data stream. + * Secondly it computes the hash and stores it in the bkt_hash field at + * the end of the input byte stream. This way it will be available for + * future use without needing to recompute the hash. + **/ +void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, + union ixgbe_atr_input *input_mask) +{ + + u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; + u32 bucket_hash = 0; + + /* Apply masks to input data */ + input->dword_stream[0] &= input_mask->dword_stream[0]; + input->dword_stream[1] &= input_mask->dword_stream[1]; + input->dword_stream[2] &= input_mask->dword_stream[2]; + input->dword_stream[3] &= input_mask->dword_stream[3]; + input->dword_stream[4] &= input_mask->dword_stream[4]; + input->dword_stream[5] &= input_mask->dword_stream[5]; + input->dword_stream[6] &= input_mask->dword_stream[6]; + input->dword_stream[7] &= input_mask->dword_stream[7]; + input->dword_stream[8] &= input_mask->dword_stream[8]; + input->dword_stream[9] &= input_mask->dword_stream[9]; + input->dword_stream[10] &= input_mask->dword_stream[10]; + + /* record the flow_vm_vlan bits as they are a key part to the hash */ + flow_vm_vlan = IXGBE_NTOHL(input->dword_stream[0]); + + /* generate common hash dword */ + hi_hash_dword = IXGBE_NTOHL(input->dword_stream[1] ^ + input->dword_stream[2] ^ + input->dword_stream[3] ^ + input->dword_stream[4] ^ + input->dword_stream[5] ^ + input->dword_stream[6] ^ + input->dword_stream[7] ^ + input->dword_stream[8] ^ + input->dword_stream[9] ^ + input->dword_stream[10]); + + /* low dword is word swapped version of common */ + lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); + + /* apply flow ID/VM pool/VLAN ID bits to hash words */ + hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); + + /* Process bits 0 and 16 */ + IXGBE_COMPUTE_BKT_HASH_ITERATION(0); + + /* + * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to + * delay this because bit 0 of the stream should not be processed + * so we do not add the vlan until after bit 0 was processed + */ + lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); + + /* Process remaining 30 bit of the key */ + IXGBE_COMPUTE_BKT_HASH_ITERATION(1); + IXGBE_COMPUTE_BKT_HASH_ITERATION(2); + IXGBE_COMPUTE_BKT_HASH_ITERATION(3); + IXGBE_COMPUTE_BKT_HASH_ITERATION(4); + IXGBE_COMPUTE_BKT_HASH_ITERATION(5); + IXGBE_COMPUTE_BKT_HASH_ITERATION(6); + IXGBE_COMPUTE_BKT_HASH_ITERATION(7); + IXGBE_COMPUTE_BKT_HASH_ITERATION(8); + IXGBE_COMPUTE_BKT_HASH_ITERATION(9); + IXGBE_COMPUTE_BKT_HASH_ITERATION(10); + IXGBE_COMPUTE_BKT_HASH_ITERATION(11); + IXGBE_COMPUTE_BKT_HASH_ITERATION(12); + IXGBE_COMPUTE_BKT_HASH_ITERATION(13); + IXGBE_COMPUTE_BKT_HASH_ITERATION(14); + IXGBE_COMPUTE_BKT_HASH_ITERATION(15); + + /* + * Limit hash to 13 bits since max bucket count is 8K. + * Store result at the end of the input stream. + */ + input->formatted.bkt_hash = bucket_hash & 0x1FFF; +} + +/** + * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks + * @input_mask: mask to be bit swapped + * + * The source and destination port masks for flow director are bit swapped + * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to + * generate a correctly swapped value we need to bit swap the mask and that + * is what is accomplished by this function. + **/ +static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask) +{ + u32 mask = IXGBE_NTOHS(input_mask->formatted.dst_port); + mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT; + mask |= IXGBE_NTOHS(input_mask->formatted.src_port); + mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1); + mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2); + mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4); + return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8); +} + +/* + * These two macros are meant to address the fact that we have registers + * that are either all or in part big-endian. As a result on big-endian + * systems we will end up byte swapping the value to little-endian before + * it is byte swapped again and written to the hardware in the original + * big-endian format. + */ +#define IXGBE_STORE_AS_BE32(_value) \ + (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \ + (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24)) + +#define IXGBE_WRITE_REG_BE32(a, reg, value) \ + IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(IXGBE_NTOHL(value))) + +#define IXGBE_STORE_AS_BE16(_value) \ + IXGBE_NTOHS(((u16)(_value) >> 8) | ((u16)(_value) << 8)) + +s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input_mask) +{ + /* mask IPv6 since it is currently not supported */ + u32 fdirm = IXGBE_FDIRM_DIPv6; + u32 fdirtcpm; + + /* + * Program the relevant mask registers. If src/dst_port or src/dst_addr + * are zero, then assume a full mask for that field. Also assume that + * a VLAN of 0 is unspecified, so mask that out as well. L4type + * cannot be masked out in this implementation. + * + * This also assumes IPv4 only. IPv6 masking isn't supported at this + * point in time. + */ + + /* verify bucket hash is cleared on hash generation */ + if (input_mask->formatted.bkt_hash) + hw_dbg(hw, " bucket hash should always be 0 in mask\n"); + + /* Program FDIRM and verify partial masks */ + switch (input_mask->formatted.vm_pool & 0x7F) { + case 0x0: + fdirm |= IXGBE_FDIRM_POOL; + case 0x7F: + break; + default: + hw_dbg(hw, " Error on vm pool mask\n"); + return IXGBE_ERR_CONFIG; + } + + switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) { + case 0x0: + fdirm |= IXGBE_FDIRM_L4P; + if (input_mask->formatted.dst_port || + input_mask->formatted.src_port) { + hw_dbg(hw, " Error on src/dst port mask\n"); + return IXGBE_ERR_CONFIG; + } + case IXGBE_ATR_L4TYPE_MASK: + break; + default: + hw_dbg(hw, " Error on flow type mask\n"); + return IXGBE_ERR_CONFIG; + } + + switch (IXGBE_NTOHS(input_mask->formatted.vlan_id) & 0xEFFF) { + case 0x0000: + /* mask VLAN ID, fall through to mask VLAN priority */ + fdirm |= IXGBE_FDIRM_VLANID; + case 0x0FFF: + /* mask VLAN priority */ + fdirm |= IXGBE_FDIRM_VLANP; + break; + case 0xE000: + /* mask VLAN ID only, fall through */ + fdirm |= IXGBE_FDIRM_VLANID; + case 0xEFFF: + /* no VLAN fields masked */ + break; + default: + hw_dbg(hw, " Error on VLAN mask\n"); + return IXGBE_ERR_CONFIG; + } + + switch (input_mask->formatted.flex_bytes & 0xFFFF) { + case 0x0000: + /* Mask Flex Bytes, fall through */ + fdirm |= IXGBE_FDIRM_FLEX; + case 0xFFFF: + break; + default: + hw_dbg(hw, " Error on flexible byte mask\n"); + return IXGBE_ERR_CONFIG; + } + + /* Now mask VM pool and destination IPv6 - bits 5 and 2 */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm); + + /* store the TCP/UDP port masks, bit reversed from port layout */ + fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask); + + /* write both the same so that UDP and TCP use the same mask */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm); + IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm); + + /* store source and destination IP masks (big-enian) */ + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M, + ~input_mask->formatted.src_ip[0]); + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M, + ~input_mask->formatted.dst_ip[0]); + + return 0; +} + +s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input, + u16 soft_id, u8 queue) +{ + u32 fdirport, fdirvlan, fdirhash, fdircmd; + + /* currently IPv6 is not supported, must be programmed with 0 */ + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), + input->formatted.src_ip[0]); + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1), + input->formatted.src_ip[1]); + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2), + input->formatted.src_ip[2]); + + /* record the source address (big-endian) */ + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]); + + /* record the first 32 bits of the destination address (big-endian) */ + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]); + + /* record source and destination port (little-endian)*/ + fdirport = IXGBE_NTOHS(input->formatted.dst_port); + fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT; + fdirport |= IXGBE_NTOHS(input->formatted.src_port); + IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport); + + /* record vlan (little-endian) and flex_bytes(big-endian) */ + fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes); + fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT; + fdirvlan |= IXGBE_NTOHS(input->formatted.vlan_id); + IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan); + + /* configure FDIRHASH register */ + fdirhash = input->formatted.bkt_hash; + fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); + + /* + * flush all previous writes to make certain registers are + * programmed prior to issuing the command + */ + IXGBE_WRITE_FLUSH(hw); + + /* configure FDIRCMD register */ + fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | + IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; + if (queue == IXGBE_FDIR_DROP_QUEUE) + fdircmd |= IXGBE_FDIRCMD_DROP; + fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; + fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; + fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT; + + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd); + + return 0; +} + +s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input, + u16 soft_id) +{ + u32 fdirhash; + u32 fdircmd = 0; + u32 retry_count; + s32 err = 0; + + /* configure FDIRHASH register */ + fdirhash = input->formatted.bkt_hash; + fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); + + /* flush hash to HW */ + IXGBE_WRITE_FLUSH(hw); + + /* Query if filter is present */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT); + + for (retry_count = 10; retry_count; retry_count--) { + /* allow 10us for query to process */ + udelay(10); + /* verify query completed successfully */ + fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD); + if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK)) + break; + } + + if (!retry_count) + err = IXGBE_ERR_FDIR_REINIT_FAILED; + + /* if filter exists in hardware then remove it */ + if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) { + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); + IXGBE_WRITE_FLUSH(hw); + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + IXGBE_FDIRCMD_CMD_REMOVE_FLOW); + } + + return err; +} + +/** + * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter + * @hw: pointer to hardware structure + * @input: input bitstream + * @input_mask: mask for the input bitstream + * @soft_id: software index for the filters + * @queue: queue index to direct traffic to + * + * Note that the caller to this function must lock before calling, since the + * hardware writes must be protected from one another. + **/ +s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input, + union ixgbe_atr_input *input_mask, + u16 soft_id, u8 queue) +{ + s32 err = IXGBE_ERR_CONFIG; + + /* + * Check flow_type formatting, and bail out before we touch the hardware + * if there's a configuration issue + */ + switch (input->formatted.flow_type) { + case IXGBE_ATR_FLOW_TYPE_IPV4: + input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK; + if (input->formatted.dst_port || input->formatted.src_port) { + hw_dbg(hw, " Error on src/dst port\n"); + return IXGBE_ERR_CONFIG; + } + break; + case IXGBE_ATR_FLOW_TYPE_SCTPV4: + if (input->formatted.dst_port || input->formatted.src_port) { + hw_dbg(hw, " Error on src/dst port\n"); + return IXGBE_ERR_CONFIG; + } + case IXGBE_ATR_FLOW_TYPE_TCPV4: + case IXGBE_ATR_FLOW_TYPE_UDPV4: + input_mask->formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK | + IXGBE_ATR_L4TYPE_MASK; + break; + default: + hw_dbg(hw, " Error on flow type input\n"); + return err; + } + + /* program input mask into the HW */ + err = ixgbe_fdir_set_input_mask_82599(hw, input_mask); + if (err) + return err; + + /* apply mask and compute/store hash */ + ixgbe_atr_compute_perfect_hash_82599(input, input_mask); + + /* program filters to filter memory */ + return ixgbe_fdir_write_perfect_filter_82599(hw, input, + soft_id, queue); +} + +/** + * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value + * + * Performs read operation to Omer analog register specified. + **/ +s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) +{ + u32 core_ctl; + + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD | + (reg << 8)); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL); + *val = (u8)core_ctl; + + return 0; +} + +/** + * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write + * + * Performs write operation to Omer analog register specified. + **/ +s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) +{ + u32 core_ctl; + + core_ctl = (reg << 8) | val; + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + + return 0; +} + +/** + * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function + * and the generation start_hw function. + * Then performs revision-specific operations, if any. + **/ +s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + + ret_val = ixgbe_start_hw_generic(hw); + if (ret_val != 0) + goto out; + + ret_val = ixgbe_start_hw_gen2(hw); + if (ret_val != 0) + goto out; + + /* We need to run link autotry after the driver loads */ + hw->mac.autotry_restart = true; + + if (ret_val == 0) + ret_val = ixgbe_verify_fw_version_82599(hw); +out: + return ret_val; +} + +/** + * ixgbe_identify_phy_82599 - Get physical layer module + * @hw: pointer to hardware structure + * + * Determines the physical layer module found on the current adapter. + * If PHY already detected, maintains current PHY type in hw struct, + * otherwise executes the PHY detection routine. + **/ +s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + + /* Detect PHY if not unknown - returns success if already detected. */ + status = ixgbe_identify_phy_generic(hw); + if (status != 0) { + /* 82599 10GBASE-T requires an external PHY */ + if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) + goto out; + else + status = ixgbe_identify_module_generic(hw); + } + + /* Set PHY type none if no PHY detected */ + if (hw->phy.type == ixgbe_phy_unknown) { + hw->phy.type = ixgbe_phy_none; + status = 0; + } + + /* Return error if SFP module has been detected but is not supported */ + if (hw->phy.type == ixgbe_phy_sfp_unsupported) + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + +out: + return status; +} + +/** + * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u16 ext_ability = 0; + u8 comp_codes_10g = 0; + u8 comp_codes_1g = 0; + + hw->phy.ops.identify(hw); + + switch (hw->phy.type) { + case ixgbe_phy_tn: + case ixgbe_phy_cu_unknown: + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); + if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + goto out; + default: + break; + } + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_AN: + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) { + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | + IXGBE_PHYSICAL_LAYER_1000BASE_BX; + goto out; + } else + /* SFI mode so read SFP module */ + goto sfp_check; + break; + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; + else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI; + goto out; + break; + case IXGBE_AUTOC_LMS_10G_SERIAL: + if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) { + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) + goto sfp_check; + break; + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + if (autoc & IXGBE_AUTOC_KX_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + if (autoc & IXGBE_AUTOC_KR_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + break; + default: + goto out; + break; + } + +sfp_check: + /* SFP check must be done last since DA modules are sometimes used to + * test KR mode - we need to id KR mode correctly before SFP module. + * Call identify_sfp because the pluggable module may have changed */ + hw->phy.ops.identify_sfp(hw); + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + goto out; + + switch (hw->phy.type) { + case ixgbe_phy_sfp_passive_tyco: + case ixgbe_phy_sfp_passive_unknown: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_phy_sfp_ftl_active: + case ixgbe_phy_sfp_active_unknown: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA; + break; + case ixgbe_phy_sfp_avago: + case ixgbe_phy_sfp_ftl: + case ixgbe_phy_sfp_intel: + case ixgbe_phy_sfp_unknown: + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g); + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); + if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T; + else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX; + break; + default: + break; + } + +out: + return physical_layer; +} + +/** + * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL + * + * Enables the Rx DMA unit for 82599 + **/ +s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) +{ + + /* + * Workaround for 82599 silicon errata when enabling the Rx datapath. + * If traffic is incoming before we enable the Rx unit, it could hang + * the Rx DMA unit. Therefore, make sure the security engine is + * completely disabled prior to enabling the Rx unit. + */ + + hw->mac.ops.disable_sec_rx_path(hw); + + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); + + hw->mac.ops.enable_sec_rx_path(hw); + + return 0; +} + +/** + * ixgbe_verify_fw_version_82599 - verify fw version for 82599 + * @hw: pointer to hardware structure + * + * Verifies that installed the firmware version is 0.6 or higher + * for SFI devices. All 82599 SFI devices should have version 0.6 or higher. + * + * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or + * if the FW version is not supported. + **/ +static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_EEPROM_VERSION; + u16 fw_offset, fw_ptp_cfg_offset; + u16 fw_version = 0; + + /* firmware check is only necessary for SFI devices */ + if (hw->phy.media_type != ixgbe_media_type_fiber) { + status = 0; + goto fw_version_out; + } + + /* get the offset to the Firmware Module block */ + hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); + + if ((fw_offset == 0) || (fw_offset == 0xFFFF)) + goto fw_version_out; + + /* get the offset to the Pass Through Patch Configuration block */ + hw->eeprom.ops.read(hw, (fw_offset + + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR), + &fw_ptp_cfg_offset); + + if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF)) + goto fw_version_out; + + /* get the firmware version */ + hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset + + IXGBE_FW_PATCH_VERSION_4), &fw_version); + + if (fw_version > 0x5) + status = 0; + +fw_version_out: + return status; +} + +/** + * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state. + * @hw: pointer to hardware structure + * + * Returns true if the LESM FW module is present and enabled. Otherwise + * returns false. Smart Speed must be disabled if LESM FW module is enabled. + **/ +bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) +{ + bool lesm_enabled = false; + u16 fw_offset, fw_lesm_param_offset, fw_lesm_state; + s32 status; + + /* get the offset to the Firmware Module block */ + status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); + + if ((status != 0) || + (fw_offset == 0) || (fw_offset == 0xFFFF)) + goto out; + + /* get the offset to the LESM Parameters block */ + status = hw->eeprom.ops.read(hw, (fw_offset + + IXGBE_FW_LESM_PARAMETERS_PTR), + &fw_lesm_param_offset); + + if ((status != 0) || + (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF)) + goto out; + + /* get the lesm state word */ + status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset + + IXGBE_FW_LESM_STATE_1), + &fw_lesm_state); + + if ((status == 0) && + (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED)) + lesm_enabled = true; + +out: + return lesm_enabled; +} + +/** + * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using + * fastest available method + * + * @hw: pointer to hardware structure + * @offset: offset of word in EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM + * + * Retrieves 16 bit word(s) read from EEPROM + **/ +static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + s32 ret_val = IXGBE_ERR_CONFIG; + + /* + * If EEPROM is detected and can be addressed using 14 bits, + * use EERD otherwise use bit bang + */ + if ((eeprom->type == ixgbe_eeprom_spi) && + (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR)) + ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words, + data); + else + ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset, + words, + data); + + return ret_val; +} + +/** + * ixgbe_read_eeprom_82599 - Read EEPROM word using + * fastest available method + * + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM + **/ +static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, + u16 offset, u16 *data) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + s32 ret_val = IXGBE_ERR_CONFIG; + + /* + * If EEPROM is detected and can be addressed using 14 bits, + * use EERD otherwise use bit bang + */ + if ((eeprom->type == ixgbe_eeprom_spi) && + (offset <= IXGBE_EERD_MAX_ADDR)) + ret_val = ixgbe_read_eerd_generic(hw, offset, data); + else + ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data); + + return ret_val; +} + +/** + * ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + u32 esdp; + s32 status; + s32 timeout = 200; + + if (hw->phy.qsfp_shared_i2c_bus == TRUE) { + /* Acquire I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + while (timeout) { + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (esdp & IXGBE_ESDP_SDP1) + break; + + msleep(5); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Driver can't access resource," + " acquiring I2C bus timeout.\n"); + status = IXGBE_ERR_I2C; + goto release_i2c_access; + } + } + + status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data); + +release_i2c_access: + + if (hw->phy.qsfp_shared_i2c_bus == TRUE) { + /* Release I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp &= ~IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + } + + return status; +} + +/** + * ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + u32 esdp; + s32 status; + s32 timeout = 200; + + if (hw->phy.qsfp_shared_i2c_bus == TRUE) { + /* Acquire I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp |= IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + + while (timeout) { + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (esdp & IXGBE_ESDP_SDP1) + break; + + msleep(5); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Driver can't access resource," + " acquiring I2C bus timeout.\n"); + status = IXGBE_ERR_I2C; + goto release_i2c_access; + } + } + + status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data); + +release_i2c_access: + + if (hw->phy.qsfp_shared_i2c_bus == TRUE) { + /* Release I2C bus ownership. */ + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + esdp &= ~IXGBE_ESDP_SDP0; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); + } + + return status; +} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.h new file mode 100644 index 00000000..0305ed73 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82599.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_82599_H_ +#define _IXGBE_82599_H_ + +s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, bool *autoneg); +enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw); +void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete); +s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete); +s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete); +s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg, bool autoneg_wait_to_complete); +s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw); +void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw); +s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw); +s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val); +s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val); +s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw); +s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw); +s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw); +u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw); +s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval); +bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw); +#endif /* _IXGBE_82599_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c new file mode 100644 index 00000000..1be4c64f --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.c @@ -0,0 +1,1142 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe_api.h" +#include "ixgbe_common.h" + +/** + * ixgbe_init_shared_code - Initialize the shared code + * @hw: pointer to hardware structure + * + * This will assign function pointers and assign the MAC type and PHY code. + * Does not touch the hardware. This function must be called prior to any + * other function in the shared code. The ixgbe_hw structure should be + * memset to 0 prior to calling this function. The following fields in + * hw structure should be filled in prior to calling this function: + * hw_addr, back, device_id, vendor_id, subsystem_device_id, + * subsystem_vendor_id, and revision_id + **/ +s32 ixgbe_init_shared_code(struct ixgbe_hw *hw) +{ + s32 status; + + /* + * Set the mac type + */ + ixgbe_set_mac_type(hw); + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + status = ixgbe_init_ops_82598(hw); + break; + case ixgbe_mac_82599EB: + status = ixgbe_init_ops_82599(hw); + break; + case ixgbe_mac_X540: + status = ixgbe_init_ops_X540(hw); + break; + default: + status = IXGBE_ERR_DEVICE_NOT_SUPPORTED; + break; + } + + return status; +} + +/** + * ixgbe_set_mac_type - Sets MAC type + * @hw: pointer to the HW structure + * + * This function sets the mac type of the adapter based on the + * vendor ID and device ID stored in the hw structure. + **/ +s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + + if (hw->vendor_id == IXGBE_INTEL_VENDOR_ID) { + switch (hw->device_id) { + case IXGBE_DEV_ID_82598: + case IXGBE_DEV_ID_82598_BX: + case IXGBE_DEV_ID_82598AF_SINGLE_PORT: + case IXGBE_DEV_ID_82598AF_DUAL_PORT: + case IXGBE_DEV_ID_82598AT: + case IXGBE_DEV_ID_82598AT2: + case IXGBE_DEV_ID_82598EB_CX4: + case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: + case IXGBE_DEV_ID_82598_DA_DUAL_PORT: + case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: + case IXGBE_DEV_ID_82598EB_XF_LR: + case IXGBE_DEV_ID_82598EB_SFP_LOM: + hw->mac.type = ixgbe_mac_82598EB; + break; + case IXGBE_DEV_ID_82599_KX4: + case IXGBE_DEV_ID_82599_KX4_MEZZ: + case IXGBE_DEV_ID_82599_XAUI_LOM: + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: + case IXGBE_DEV_ID_82599_KR: + case IXGBE_DEV_ID_82599_SFP: + case IXGBE_DEV_ID_82599_BACKPLANE_FCOE: + case IXGBE_DEV_ID_82599_SFP_FCOE: + case IXGBE_DEV_ID_82599_SFP_EM: + case IXGBE_DEV_ID_82599_SFP_SF2: + case IXGBE_DEV_ID_82599_QSFP_SF_QP: + case IXGBE_DEV_ID_82599EN_SFP: + case IXGBE_DEV_ID_82599_CX4: + case IXGBE_DEV_ID_82599_LS: + case IXGBE_DEV_ID_82599_T3_LOM: + hw->mac.type = ixgbe_mac_82599EB; + break; + case IXGBE_DEV_ID_X540T: + hw->mac.type = ixgbe_mac_X540; + break; + default: + ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED; + break; + } + } else { + ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED; + } + + hw_dbg(hw, "ixgbe_set_mac_type found mac: %d, returns: %d\n", + hw->mac.type, ret_val); + return ret_val; +} + +/** + * ixgbe_init_hw - Initialize the hardware + * @hw: pointer to hardware structure + * + * Initialize the hardware by resetting and then starting the hardware + **/ +s32 ixgbe_init_hw(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.init_hw, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_reset_hw - Performs a hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks and + * clears all interrupts, performs a PHY reset, and performs a MAC reset + **/ +s32 ixgbe_reset_hw(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.reset_hw, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_start_hw - Prepares hardware for Rx/Tx + * @hw: pointer to hardware structure + * + * Starts the hardware by filling the bus info structure and media type, + * clears all on chip counters, initializes receive address registers, + * multicast table, VLAN filter table, calls routine to setup link and + * flow control settings, and leaves transmit and receive units disabled + * and uninitialized. + **/ +s32 ixgbe_start_hw(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.start_hw, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_clear_hw_cntrs - Clear hardware counters + * @hw: pointer to hardware structure + * + * Clears all hardware statistics counters by reading them from the hardware + * Statistics counters are clear on read. + **/ +s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.clear_hw_cntrs, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_get_media_type - Get media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.get_media_type, (hw), + ixgbe_media_type_unknown); +} + +/** + * ixgbe_get_mac_addr - Get MAC address + * @hw: pointer to hardware structure + * @mac_addr: Adapter MAC address + * + * Reads the adapter's MAC address from the first Receive Address Register + * (RAR0) A reset of the adapter must have been performed prior to calling + * this function in order for the MAC address to have been loaded from the + * EEPROM into RAR0 + **/ +s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr) +{ + return ixgbe_call_func(hw, hw->mac.ops.get_mac_addr, + (hw, mac_addr), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_get_san_mac_addr - Get SAN MAC address + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address + * + * Reads the SAN MAC address from the EEPROM, if it's available. This is + * per-port, so set_lan_id() must be called before reading the addresses. + **/ +s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr) +{ + return ixgbe_call_func(hw, hw->mac.ops.get_san_mac_addr, + (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_set_san_mac_addr - Write a SAN MAC address + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address + * + * Writes A SAN MAC address to the EEPROM. + **/ +s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr) +{ + return ixgbe_call_func(hw, hw->mac.ops.set_san_mac_addr, + (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_get_device_caps - Get additional device capabilities + * @hw: pointer to hardware structure + * @device_caps: the EEPROM word for device capabilities + * + * Reads the extra device capabilities from the EEPROM + **/ +s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps) +{ + return ixgbe_call_func(hw, hw->mac.ops.get_device_caps, + (hw, device_caps), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM + * @hw: pointer to hardware structure + * @wwnn_prefix: the alternative WWNN prefix + * @wwpn_prefix: the alternative WWPN prefix + * + * This function will read the EEPROM from the alternative SAN MAC address + * block to check the support for the alternative WWNN/WWPN prefix support. + **/ +s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix, + u16 *wwpn_prefix) +{ + return ixgbe_call_func(hw, hw->mac.ops.get_wwn_prefix, + (hw, wwnn_prefix, wwpn_prefix), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM + * @hw: pointer to hardware structure + * @bs: the fcoe boot status + * + * This function will read the FCOE boot status from the iSCSI FCOE block + **/ +s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs) +{ + return ixgbe_call_func(hw, hw->mac.ops.get_fcoe_boot_status, + (hw, bs), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_get_bus_info - Set PCI bus info + * @hw: pointer to hardware structure + * + * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure + **/ +s32 ixgbe_get_bus_info(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.get_bus_info, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_get_num_of_tx_queues - Get Tx queues + * @hw: pointer to hardware structure + * + * Returns the number of transmit queues for the given adapter. + **/ +u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw) +{ + return hw->mac.max_tx_queues; +} + +/** + * ixgbe_get_num_of_rx_queues - Get Rx queues + * @hw: pointer to hardware structure + * + * Returns the number of receive queues for the given adapter. + **/ +u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw) +{ + return hw->mac.max_rx_queues; +} + +/** + * ixgbe_stop_adapter - Disable Rx/Tx units + * @hw: pointer to hardware structure + * + * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, + * disables transmit and receive units. The adapter_stopped flag is used by + * the shared code and drivers to determine if the adapter is in a stopped + * state and should not touch the hardware. + **/ +s32 ixgbe_stop_adapter(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.stop_adapter, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_read_pba_string - Reads part number string from EEPROM + * @hw: pointer to hardware structure + * @pba_num: stores the part number string from the EEPROM + * @pba_num_size: part number string buffer length + * + * Reads the part number string from the EEPROM. + **/ +s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size) +{ + return ixgbe_read_pba_string_generic(hw, pba_num, pba_num_size); +} + +/** + * ixgbe_identify_phy - Get PHY type + * @hw: pointer to hardware structure + * + * Determines the physical layer module found on the current adapter. + **/ +s32 ixgbe_identify_phy(struct ixgbe_hw *hw) +{ + s32 status = 0; + + if (hw->phy.type == ixgbe_phy_unknown) { + status = ixgbe_call_func(hw, hw->phy.ops.identify, (hw), + IXGBE_NOT_IMPLEMENTED); + } + + return status; +} + +/** + * ixgbe_reset_phy - Perform a PHY reset + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reset_phy(struct ixgbe_hw *hw) +{ + s32 status = 0; + + if (hw->phy.type == ixgbe_phy_unknown) { + if (ixgbe_identify_phy(hw) != 0) + status = IXGBE_ERR_PHY; + } + + if (status == 0) { + status = ixgbe_call_func(hw, hw->phy.ops.reset, (hw), + IXGBE_NOT_IMPLEMENTED); + } + return status; +} + +/** + * ixgbe_get_phy_firmware_version - + * @hw: pointer to hardware structure + * @firmware_version: pointer to firmware version + **/ +s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version) +{ + s32 status = 0; + + status = ixgbe_call_func(hw, hw->phy.ops.get_firmware_version, + (hw, firmware_version), + IXGBE_NOT_IMPLEMENTED); + return status; +} + +/** + * ixgbe_read_phy_reg - Read PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @phy_data: Pointer to read data from PHY register + * + * Reads a value from a specified PHY register + **/ +s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, + u16 *phy_data) +{ + if (hw->phy.id == 0) + ixgbe_identify_phy(hw); + + return ixgbe_call_func(hw, hw->phy.ops.read_reg, (hw, reg_addr, + device_type, phy_data), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_write_phy_reg - Write PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @phy_data: Data to write to the PHY register + * + * Writes a value to specified PHY register + **/ +s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, + u16 phy_data) +{ + if (hw->phy.id == 0) + ixgbe_identify_phy(hw); + + return ixgbe_call_func(hw, hw->phy.ops.write_reg, (hw, reg_addr, + device_type, phy_data), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_setup_phy_link - Restart PHY autoneg + * @hw: pointer to hardware structure + * + * Restart autonegotiation and PHY and waits for completion. + **/ +s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->phy.ops.setup_link, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_check_phy_link - Determine link and speed status + * @hw: pointer to hardware structure + * + * Reads a PHY register to determine if link is up and the current speed for + * the PHY. + **/ +s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up) +{ + return ixgbe_call_func(hw, hw->phy.ops.check_link, (hw, speed, + link_up), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_setup_phy_link_speed - Set auto advertise + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * + * Sets the auto advertised capabilities + **/ +s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + return ixgbe_call_func(hw, hw->phy.ops.setup_link_speed, (hw, speed, + autoneg, autoneg_wait_to_complete), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_check_link - Get link and speed status + * @hw: pointer to hardware structure + * + * Reads the links register to determine if link is up and the current speed + **/ +s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete) +{ + return ixgbe_call_func(hw, hw->mac.ops.check_link, (hw, speed, + link_up, link_up_wait_to_complete), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_disable_tx_laser - Disable Tx laser + * @hw: pointer to hardware structure + * + * If the driver needs to disable the laser on SFI optics. + **/ +void ixgbe_disable_tx_laser(struct ixgbe_hw *hw) +{ + if (hw->mac.ops.disable_tx_laser) + hw->mac.ops.disable_tx_laser(hw); +} + +/** + * ixgbe_enable_tx_laser - Enable Tx laser + * @hw: pointer to hardware structure + * + * If the driver needs to enable the laser on SFI optics. + **/ +void ixgbe_enable_tx_laser(struct ixgbe_hw *hw) +{ + if (hw->mac.ops.enable_tx_laser) + hw->mac.ops.enable_tx_laser(hw); +} + +/** + * ixgbe_flap_tx_laser - flap Tx laser to start autotry process + * @hw: pointer to hardware structure + * + * When the driver changes the link speeds that it can support then + * flap the tx laser to alert the link partner to start autotry + * process on its end. + **/ +void ixgbe_flap_tx_laser(struct ixgbe_hw *hw) +{ + if (hw->mac.ops.flap_tx_laser) + hw->mac.ops.flap_tx_laser(hw); +} + +/** + * ixgbe_setup_link - Set link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * + * Configures link settings. Restarts the link. + * Performs autonegotiation if needed. + **/ +s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + return ixgbe_call_func(hw, hw->mac.ops.setup_link, (hw, speed, + autoneg, autoneg_wait_to_complete), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_get_link_capabilities - Returns link capabilities + * @hw: pointer to hardware structure + * + * Determines the link capabilities of the current configuration. + **/ +s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *autoneg) +{ + return ixgbe_call_func(hw, hw->mac.ops.get_link_capabilities, (hw, + speed, autoneg), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_led_on - Turn on LEDs + * @hw: pointer to hardware structure + * @index: led number to turn on + * + * Turns on the software controllable LEDs. + **/ +s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index) +{ + return ixgbe_call_func(hw, hw->mac.ops.led_on, (hw, index), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_led_off - Turn off LEDs + * @hw: pointer to hardware structure + * @index: led number to turn off + * + * Turns off the software controllable LEDs. + **/ +s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index) +{ + return ixgbe_call_func(hw, hw->mac.ops.led_off, (hw, index), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_blink_led_start - Blink LEDs + * @hw: pointer to hardware structure + * @index: led number to blink + * + * Blink LED based on index. + **/ +s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index) +{ + return ixgbe_call_func(hw, hw->mac.ops.blink_led_start, (hw, index), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_blink_led_stop - Stop blinking LEDs + * @hw: pointer to hardware structure + * + * Stop blinking LED based on index. + **/ +s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index) +{ + return ixgbe_call_func(hw, hw->mac.ops.blink_led_stop, (hw, index), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_init_eeprom_params - Initialize EEPROM parameters + * @hw: pointer to hardware structure + * + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. + **/ +s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->eeprom.ops.init_params, (hw), + IXGBE_NOT_IMPLEMENTED); +} + + +/** + * ixgbe_write_eeprom - Write word to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @data: 16 bit word to be written to the EEPROM + * + * Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not + * called after this function, the EEPROM will most likely contain an + * invalid checksum. + **/ +s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + return ixgbe_call_func(hw, hw->eeprom.ops.write, (hw, offset, data), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_write_eeprom_buffer - Write word(s) to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @data: 16 bit word(s) to be written to the EEPROM + * @words: number of words + * + * Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not + * called after this function, the EEPROM will most likely contain an + * invalid checksum. + **/ +s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words, + u16 *data) +{ + return ixgbe_call_func(hw, hw->eeprom.ops.write_buffer, + (hw, offset, words, data), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_read_eeprom - Read word from EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @data: read 16 bit value from EEPROM + * + * Reads 16 bit value from EEPROM + **/ +s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + return ixgbe_call_func(hw, hw->eeprom.ops.read, (hw, offset, data), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_read_eeprom_buffer - Read word(s) from EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @data: read 16 bit word(s) from EEPROM + * @words: number of words + * + * Reads 16 bit word(s) from EEPROM + **/ +s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + return ixgbe_call_func(hw, hw->eeprom.ops.read_buffer, + (hw, offset, words, data), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum + * + * Performs checksum calculation and validates the EEPROM checksum + **/ +s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val) +{ + return ixgbe_call_func(hw, hw->eeprom.ops.validate_checksum, + (hw, checksum_val), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_eeprom_update_checksum - Updates the EEPROM checksum + * @hw: pointer to hardware structure + **/ +s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->eeprom.ops.update_checksum, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_insert_mac_addr - Find a RAR for this mac address + * @hw: pointer to hardware structure + * @addr: Address to put into receive address register + * @vmdq: VMDq pool to assign + * + * Puts an ethernet address into a receive address register, or + * finds the rar that it is already in; adds to the pool list + **/ +s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) +{ + return ixgbe_call_func(hw, hw->mac.ops.insert_mac_addr, + (hw, addr, vmdq), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_set_rar - Set Rx address register + * @hw: pointer to hardware structure + * @index: Receive address register to write + * @addr: Address to put into receive address register + * @vmdq: VMDq "set" + * @enable_addr: set flag that address is active + * + * Puts an ethernet address into a receive address register. + **/ +s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, + u32 enable_addr) +{ + return ixgbe_call_func(hw, hw->mac.ops.set_rar, (hw, index, addr, vmdq, + enable_addr), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_clear_rar - Clear Rx address register + * @hw: pointer to hardware structure + * @index: Receive address register to write + * + * Puts an ethernet address into a receive address register. + **/ +s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index) +{ + return ixgbe_call_func(hw, hw->mac.ops.clear_rar, (hw, index), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_set_vmdq - Associate a VMDq index with a receive address + * @hw: pointer to hardware structure + * @rar: receive address register index to associate with VMDq index + * @vmdq: VMDq set or pool index + **/ +s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + return ixgbe_call_func(hw, hw->mac.ops.set_vmdq, (hw, rar, vmdq), + IXGBE_NOT_IMPLEMENTED); + +} + +/** + * ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address + * @hw: pointer to hardware structure + * @vmdq: VMDq default pool index + **/ +s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq) +{ + return ixgbe_call_func(hw, hw->mac.ops.set_vmdq_san_mac, + (hw, vmdq), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address + * @hw: pointer to hardware structure + * @rar: receive address register index to disassociate with VMDq index + * @vmdq: VMDq set or pool index + **/ +s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + return ixgbe_call_func(hw, hw->mac.ops.clear_vmdq, (hw, rar, vmdq), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_init_rx_addrs - Initializes receive address filters. + * @hw: pointer to hardware structure + * + * Places the MAC address in receive address register 0 and clears the rest + * of the receive address registers. Clears the multicast table. Assumes + * the receiver is in reset when the routine is called. + **/ +s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.init_rx_addrs, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_get_num_rx_addrs - Returns the number of RAR entries. + * @hw: pointer to hardware structure + **/ +u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw) +{ + return hw->mac.num_rar_entries; +} + +/** + * ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses + * @hw: pointer to hardware structure + * @addr_list: the list of new multicast addresses + * @addr_count: number of addresses + * @func: iterator function to walk the multicast address list + * + * The given list replaces any existing list. Clears the secondary addrs from + * receive address registers. Uses unused receive address registers for the + * first secondary addresses, and falls back to promiscuous mode as needed. + **/ +s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list, + u32 addr_count, ixgbe_mc_addr_itr func) +{ + return ixgbe_call_func(hw, hw->mac.ops.update_uc_addr_list, (hw, + addr_list, addr_count, func), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses + * @hw: pointer to hardware structure + * @mc_addr_list: the list of new multicast addresses + * @mc_addr_count: number of addresses + * @func: iterator function to walk the multicast address list + * + * The given list replaces any existing list. Clears the MC addrs from receive + * address registers and the multicast table. Uses unused receive address + * registers for the first multicast addresses, and hashes the rest into the + * multicast table. + **/ +s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count, ixgbe_mc_addr_itr func, + bool clear) +{ + return ixgbe_call_func(hw, hw->mac.ops.update_mc_addr_list, (hw, + mc_addr_list, mc_addr_count, func, clear), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_enable_mc - Enable multicast address in RAR + * @hw: pointer to hardware structure + * + * Enables multicast address in RAR and the use of the multicast hash table. + **/ +s32 ixgbe_enable_mc(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.enable_mc, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_disable_mc - Disable multicast address in RAR + * @hw: pointer to hardware structure + * + * Disables multicast address in RAR and the use of the multicast hash table. + **/ +s32 ixgbe_disable_mc(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.disable_mc, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_clear_vfta - Clear VLAN filter table + * @hw: pointer to hardware structure + * + * Clears the VLAN filer table, and the VMDq index associated with the filter + **/ +s32 ixgbe_clear_vfta(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.clear_vfta, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_set_vfta - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFTA + * @vlan_on: boolean flag to turn on/off VLAN in VFTA + * + * Turn on/off specified VLAN in the VLAN filter table. + **/ +s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on) +{ + return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind, + vlan_on), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_set_vlvf - Set VLAN Pool Filter + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFVFB + * @vlan_on: boolean flag to turn on/off VLAN in VFVF + * @vfta_changed: pointer to boolean flag which indicates whether VFTA + * should be changed + * + * Turn on/off specified bit in VLVF table. + **/ +s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, + bool *vfta_changed) +{ + return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind, + vlan_on, vfta_changed), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_fc_enable - Enable flow control + * @hw: pointer to hardware structure + * + * Configures the flow control settings based on SW configuration. + **/ +s32 ixgbe_fc_enable(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.fc_enable, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_set_fw_drv_ver - Try to send the driver version number FW + * @hw: pointer to hardware structure + * @maj: driver major number to be sent to firmware + * @min: driver minor number to be sent to firmware + * @build: driver build number to be sent to firmware + * @ver: driver version number to be sent to firmware + **/ +s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, + u8 ver) +{ + return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min, + build, ver), IXGBE_NOT_IMPLEMENTED); +} + + +/** + * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data + * @hw: pointer to hardware structure + * + * Updates the temperatures in mac.thermal_sensor_data + **/ +s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.get_thermal_sensor_data, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Inits the thermal sensor thresholds according to the NVM map + **/ +s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.init_thermal_sensor_thresh, (hw), + IXGBE_NOT_IMPLEMENTED); +} +/** + * ixgbe_read_analog_reg8 - Reads 8 bit analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value + * + * Performs write operation to analog register specified. + **/ +s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val) +{ + return ixgbe_call_func(hw, hw->mac.ops.read_analog_reg8, (hw, reg, + val), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_write_analog_reg8 - Writes 8 bit analog register + * @hw: pointer to hardware structure + * @reg: analog register to write + * @val: value to write + * + * Performs write operation to Atlas analog register specified. + **/ +s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val) +{ + return ixgbe_call_func(hw, hw->mac.ops.write_analog_reg8, (hw, reg, + val), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_init_uta_tables - Initializes Unicast Table Arrays. + * @hw: pointer to hardware structure + * + * Initializes the Unicast Table Arrays to zero on device load. This + * is part of the Rx init addr execution path. + **/ +s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.init_uta_tables, (hw), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, + u8 *data) +{ + return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte, (hw, byte_offset, + dev_addr, data), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_write_i2c_byte - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface + * at a specified device address. + **/ +s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, + u8 data) +{ + return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte, (hw, byte_offset, + dev_addr, data), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to write + * @eeprom_data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw, + u8 byte_offset, u8 eeprom_data) +{ + return ixgbe_call_func(hw, hw->phy.ops.write_i2c_eeprom, + (hw, byte_offset, eeprom_data), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data) +{ + return ixgbe_call_func(hw, hw->phy.ops.read_i2c_eeprom, + (hw, byte_offset, eeprom_data), + IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_get_supported_physical_layer - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer, + (hw), IXGBE_PHYSICAL_LAYER_UNKNOWN); +} + +/** + * ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics + * @hw: pointer to hardware structure + * @regval: bitfield to write to the Rx DMA register + * + * Enables the Rx DMA unit of the device. + **/ +s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval) +{ + return ixgbe_call_func(hw, hw->mac.ops.enable_rx_dma, + (hw, regval), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_disable_sec_rx_path - Stops the receive data path + * @hw: pointer to hardware structure + * + * Stops the receive data path. + **/ +s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.disable_sec_rx_path, + (hw), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_enable_sec_rx_path - Enables the receive data path + * @hw: pointer to hardware structure + * + * Enables the receive data path. + **/ +s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw) +{ + return ixgbe_call_func(hw, hw->mac.ops.enable_sec_rx_path, + (hw), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) + **/ +s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u16 mask) +{ + return ixgbe_call_func(hw, hw->mac.ops.acquire_swfw_sync, + (hw, mask), IXGBE_NOT_IMPLEMENTED); +} + +/** + * ixgbe_release_swfw_semaphore - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore through SW_FW_SYNC register for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) + **/ +void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u16 mask) +{ + if (hw->mac.ops.release_swfw_sync) + hw->mac.ops.release_swfw_sync(hw, mask); +} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.h new file mode 100644 index 00000000..11247a0b --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_api.h @@ -0,0 +1,153 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_API_H_ +#define _IXGBE_API_H_ + +#include "ixgbe_type.h" + +s32 ixgbe_init_shared_code(struct ixgbe_hw *hw); + +extern s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw); +extern s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw); +extern s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw); + +s32 ixgbe_set_mac_type(struct ixgbe_hw *hw); +s32 ixgbe_init_hw(struct ixgbe_hw *hw); +s32 ixgbe_reset_hw(struct ixgbe_hw *hw); +s32 ixgbe_start_hw(struct ixgbe_hw *hw); +s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw); +enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw); +s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr); +s32 ixgbe_get_bus_info(struct ixgbe_hw *hw); +u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw); +u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw); +s32 ixgbe_stop_adapter(struct ixgbe_hw *hw); +s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size); + +s32 ixgbe_identify_phy(struct ixgbe_hw *hw); +s32 ixgbe_reset_phy(struct ixgbe_hw *hw); +s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, + u16 *phy_data); +s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, + u16 phy_data); + +s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw); +s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *link_up); +s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +void ixgbe_disable_tx_laser(struct ixgbe_hw *hw); +void ixgbe_enable_tx_laser(struct ixgbe_hw *hw); +void ixgbe_flap_tx_laser(struct ixgbe_hw *hw); +s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg, bool autoneg_wait_to_complete); +s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete); +s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *autoneg); +s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index); + +s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw); +s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data); +s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data); +s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); + +s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val); +s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw); + +s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq); +s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, + u32 enable_addr); +s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq); +s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw); +u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw); +s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list, + u32 addr_count, ixgbe_mc_addr_itr func); +s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count, ixgbe_mc_addr_itr func, + bool clear); +void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr_list, u32 vmdq); +s32 ixgbe_enable_mc(struct ixgbe_hw *hw); +s32 ixgbe_disable_mc(struct ixgbe_hw *hw); +s32 ixgbe_clear_vfta(struct ixgbe_hw *hw); +s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, + u32 vind, bool vlan_on); +s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on, bool *vfta_changed); +s32 ixgbe_fc_enable(struct ixgbe_hw *hw); +s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, + u8 ver); +s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw); +s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw); +void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr); +s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, + u16 *firmware_version); +s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val); +s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val); +s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw); +s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data); +u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw); +s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval); +s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw); +s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw); +s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw); +s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl); +s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl); +s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_hash_dword input, + union ixgbe_atr_hash_dword common, + u8 queue); +s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input_mask); +s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input, + u16 soft_id, u8 queue); +s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input, + u16 soft_id); +s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input, + union ixgbe_atr_input *mask, + u16 soft_id, + u8 queue); +void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, + union ixgbe_atr_input *mask); +u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, + union ixgbe_atr_hash_dword common); +s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, + u8 *data); +s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, + u8 data); +s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 eeprom_data); +s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr); +s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr); +s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps); +s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u16 mask); +void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u16 mask); +s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix, + u16 *wwpn_prefix); +s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs); + +#endif /* _IXGBE_API_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_common.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_common.c new file mode 100644 index 00000000..e9b9529a --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_common.c @@ -0,0 +1,4067 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe_common.h" +#include "ixgbe_phy.h" +#include "ixgbe_api.h" + +static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw); +static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw); +static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw); +static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw); +static void ixgbe_standby_eeprom(struct ixgbe_hw *hw); +static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, + u16 count); +static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count); +static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); +static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); +static void ixgbe_release_eeprom(struct ixgbe_hw *hw); + +static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); +static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, + u16 *san_mac_offset); +static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, + u16 offset); + +/** + * ixgbe_init_ops_generic - Inits function ptrs + * @hw: pointer to the hardware structure + * + * Initialize the function pointers. + **/ +s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + struct ixgbe_mac_info *mac = &hw->mac; + u32 eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + /* EEPROM */ + eeprom->ops.init_params = &ixgbe_init_eeprom_params_generic; + /* If EEPROM is valid (bit 8 = 1), use EERD otherwise use bit bang */ + if (eec & IXGBE_EEC_PRES) { + eeprom->ops.read = &ixgbe_read_eerd_generic; + eeprom->ops.read_buffer = &ixgbe_read_eerd_buffer_generic; + } else { + eeprom->ops.read = &ixgbe_read_eeprom_bit_bang_generic; + eeprom->ops.read_buffer = + &ixgbe_read_eeprom_buffer_bit_bang_generic; + } + eeprom->ops.write = &ixgbe_write_eeprom_generic; + eeprom->ops.write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic; + eeprom->ops.validate_checksum = + &ixgbe_validate_eeprom_checksum_generic; + eeprom->ops.update_checksum = &ixgbe_update_eeprom_checksum_generic; + eeprom->ops.calc_checksum = &ixgbe_calc_eeprom_checksum_generic; + + /* MAC */ + mac->ops.init_hw = &ixgbe_init_hw_generic; + mac->ops.reset_hw = NULL; + mac->ops.start_hw = &ixgbe_start_hw_generic; + mac->ops.clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic; + mac->ops.get_media_type = NULL; + mac->ops.get_supported_physical_layer = NULL; + mac->ops.enable_rx_dma = &ixgbe_enable_rx_dma_generic; + mac->ops.get_mac_addr = &ixgbe_get_mac_addr_generic; + mac->ops.stop_adapter = &ixgbe_stop_adapter_generic; + mac->ops.get_bus_info = &ixgbe_get_bus_info_generic; + mac->ops.set_lan_id = &ixgbe_set_lan_id_multi_port_pcie; + mac->ops.acquire_swfw_sync = &ixgbe_acquire_swfw_sync; + mac->ops.release_swfw_sync = &ixgbe_release_swfw_sync; + + /* LEDs */ + mac->ops.led_on = &ixgbe_led_on_generic; + mac->ops.led_off = &ixgbe_led_off_generic; + mac->ops.blink_led_start = &ixgbe_blink_led_start_generic; + mac->ops.blink_led_stop = &ixgbe_blink_led_stop_generic; + + /* RAR, Multicast, VLAN */ + mac->ops.set_rar = &ixgbe_set_rar_generic; + mac->ops.clear_rar = &ixgbe_clear_rar_generic; + mac->ops.insert_mac_addr = NULL; + mac->ops.set_vmdq = NULL; + mac->ops.clear_vmdq = NULL; + mac->ops.init_rx_addrs = &ixgbe_init_rx_addrs_generic; + mac->ops.update_uc_addr_list = &ixgbe_update_uc_addr_list_generic; + mac->ops.update_mc_addr_list = &ixgbe_update_mc_addr_list_generic; + mac->ops.enable_mc = &ixgbe_enable_mc_generic; + mac->ops.disable_mc = &ixgbe_disable_mc_generic; + mac->ops.clear_vfta = NULL; + mac->ops.set_vfta = NULL; + mac->ops.set_vlvf = NULL; + mac->ops.init_uta_tables = NULL; + + /* Flow Control */ + mac->ops.fc_enable = &ixgbe_fc_enable_generic; + + /* Link */ + mac->ops.get_link_capabilities = NULL; + mac->ops.setup_link = NULL; + mac->ops.check_link = NULL; + + return 0; +} + +/** + * ixgbe_device_supports_autoneg_fc - Check if phy supports autoneg flow + * control + * @hw: pointer to hardware structure + * + * There are several phys that do not support autoneg flow control. This + * function check the device id to see if the associated phy supports + * autoneg flow control. + **/ +static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) +{ + + switch (hw->device_id) { + case IXGBE_DEV_ID_X540T: + return 0; + case IXGBE_DEV_ID_82599_T3_LOM: + return 0; + default: + return IXGBE_ERR_FC_NOT_SUPPORTED; + } +} + +/** + * ixgbe_setup_fc - Set up flow control + * @hw: pointer to hardware structure + * + * Called at init time to set up flow control. + **/ +static s32 ixgbe_setup_fc(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + u32 reg = 0, reg_bp = 0; + u16 reg_cu = 0; + + /* + * Validate the requested mode. Strict IEEE mode does not allow + * ixgbe_fc_rx_pause because it will cause us to fail at UNH. + */ + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* + * 10gig parts do not have a word in the EEPROM to determine the + * default flow control setting, so we explicitly set it to full. + */ + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; + + /* + * Set up the 1G and 10G flow control advertisement registers so the + * HW will be able to do fc autoneg once the cable is plugged in. If + * we link at 10G, the 1G advertisement is harmless and vice versa. + */ + switch (hw->phy.media_type) { + case ixgbe_media_type_fiber: + case ixgbe_media_type_backplane: + reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); + reg_bp = IXGBE_READ_REG(hw, IXGBE_AUTOC); + break; + case ixgbe_media_type_copper: + hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®_cu); + break; + default: + break; + } + + /* + * The possible values of fc.requested_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: Invalid. + */ + switch (hw->fc.requested_mode) { + case ixgbe_fc_none: + /* Flow control completely disabled by software override. */ + reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); + if (hw->phy.media_type == ixgbe_media_type_backplane) + reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE | + IXGBE_AUTOC_ASM_PAUSE); + else if (hw->phy.media_type == ixgbe_media_type_copper) + reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE); + break; + case ixgbe_fc_tx_pause: + /* + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + reg |= IXGBE_PCS1GANA_ASM_PAUSE; + reg &= ~IXGBE_PCS1GANA_SYM_PAUSE; + if (hw->phy.media_type == ixgbe_media_type_backplane) { + reg_bp |= IXGBE_AUTOC_ASM_PAUSE; + reg_bp &= ~IXGBE_AUTOC_SYM_PAUSE; + } else if (hw->phy.media_type == ixgbe_media_type_copper) { + reg_cu |= IXGBE_TAF_ASM_PAUSE; + reg_cu &= ~IXGBE_TAF_SYM_PAUSE; + } + break; + case ixgbe_fc_rx_pause: + /* + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE, as such we fall + * through to the fc_full statement. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + reg |= IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE; + if (hw->phy.media_type == ixgbe_media_type_backplane) + reg_bp |= IXGBE_AUTOC_SYM_PAUSE | + IXGBE_AUTOC_ASM_PAUSE; + else if (hw->phy.media_type == ixgbe_media_type_copper) + reg_cu |= IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE; + break; + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = IXGBE_ERR_CONFIG; + goto out; + break; + } + + if (hw->mac.type != ixgbe_mac_X540) { + /* + * Enable auto-negotiation between the MAC & PHY; + * the MAC will advertise clause 37 flow control. + */ + IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg); + reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); + + /* Disable AN timeout */ + if (hw->fc.strict_ieee) + reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN; + + IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg); + hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg); + } + + /* + * AUTOC restart handles negotiation of 1G and 10G on backplane + * and copper. There is no need to set the PCS1GCTL register. + * + */ + if (hw->phy.media_type == ixgbe_media_type_backplane) { + reg_bp |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_bp); + } else if ((hw->phy.media_type == ixgbe_media_type_copper) && + (ixgbe_device_supports_autoneg_fc(hw) == 0)) { + hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg_cu); + } + + hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg); +out: + return ret_val; +} + +/** + * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware by filling the bus info structure and media type, clears + * all on chip counters, initializes receive address registers, multicast + * table, VLAN filter table, calls routine to set up link and flow control + * settings, and leaves transmit and receive units disabled and uninitialized + **/ +s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) +{ + s32 ret_val; + u32 ctrl_ext; + + /* Set the media type */ + hw->phy.media_type = hw->mac.ops.get_media_type(hw); + + /* PHY ops initialization must be done in reset_hw() */ + + /* Clear the VLAN filter table */ + hw->mac.ops.clear_vfta(hw); + + /* Clear statistics registers */ + hw->mac.ops.clear_hw_cntrs(hw); + + /* Set No Snoop Disable */ + ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS; + IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); + IXGBE_WRITE_FLUSH(hw); + + /* Setup flow control */ + ret_val = ixgbe_setup_fc(hw); + if (ret_val != 0) + goto out; + + /* Clear adapter stopped flag */ + hw->adapter_stopped = false; + +out: + return ret_val; +} + +/** + * ixgbe_start_hw_gen2 - Init sequence for common device family + * @hw: pointer to hw structure + * + * Performs the init sequence common to the second generation + * of 10 GbE devices. + * Devices in the second generation: + * 82599 + * X540 + **/ +s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) +{ + u32 i; + u32 regval; + + /* Clear the rate limiters */ + for (i = 0; i < hw->mac.max_tx_queues; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i); + IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0); + } + IXGBE_WRITE_FLUSH(hw); + + /* Disable relaxed ordering */ + for (i = 0; i < hw->mac.max_tx_queues; i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i)); + regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval); + } + + for (i = 0; i < hw->mac.max_rx_queues; i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | + IXGBE_DCA_RXCTRL_HEAD_WRO_EN); + IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); + } + + return 0; +} + +/** + * ixgbe_init_hw_generic - Generic hardware initialization + * @hw: pointer to hardware structure + * + * Initialize the hardware by resetting the hardware, filling the bus info + * structure and media type, clears all on chip counters, initializes receive + * address registers, multicast table, VLAN filter table, calls routine to set + * up link and flow control settings, and leaves transmit and receive units + * disabled and uninitialized + **/ +s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) +{ + s32 status; + + /* Reset the hardware */ + status = hw->mac.ops.reset_hw(hw); + + if (status == 0) { + /* Start the HW */ + status = hw->mac.ops.start_hw(hw); + } + + return status; +} + +/** + * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters + * @hw: pointer to hardware structure + * + * Clears all hardware statistics counters by reading them from the hardware + * Statistics counters are clear on read. + **/ +s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) +{ + u16 i = 0; + + IXGBE_READ_REG(hw, IXGBE_CRCERRS); + IXGBE_READ_REG(hw, IXGBE_ILLERRC); + IXGBE_READ_REG(hw, IXGBE_ERRBC); + IXGBE_READ_REG(hw, IXGBE_MSPDC); + for (i = 0; i < 8; i++) + IXGBE_READ_REG(hw, IXGBE_MPC(i)); + + IXGBE_READ_REG(hw, IXGBE_MLFC); + IXGBE_READ_REG(hw, IXGBE_MRFC); + IXGBE_READ_REG(hw, IXGBE_RLEC); + IXGBE_READ_REG(hw, IXGBE_LXONTXC); + IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); + if (hw->mac.type >= ixgbe_mac_82599EB) { + IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); + IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); + } else { + IXGBE_READ_REG(hw, IXGBE_LXONRXC); + IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); + } + + for (i = 0; i < 8; i++) { + IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); + IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); + if (hw->mac.type >= ixgbe_mac_82599EB) { + IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); + IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); + } else { + IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); + IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); + } + } + if (hw->mac.type >= ixgbe_mac_82599EB) + for (i = 0; i < 8; i++) + IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i)); + IXGBE_READ_REG(hw, IXGBE_PRC64); + IXGBE_READ_REG(hw, IXGBE_PRC127); + IXGBE_READ_REG(hw, IXGBE_PRC255); + IXGBE_READ_REG(hw, IXGBE_PRC511); + IXGBE_READ_REG(hw, IXGBE_PRC1023); + IXGBE_READ_REG(hw, IXGBE_PRC1522); + IXGBE_READ_REG(hw, IXGBE_GPRC); + IXGBE_READ_REG(hw, IXGBE_BPRC); + IXGBE_READ_REG(hw, IXGBE_MPRC); + IXGBE_READ_REG(hw, IXGBE_GPTC); + IXGBE_READ_REG(hw, IXGBE_GORCL); + IXGBE_READ_REG(hw, IXGBE_GORCH); + IXGBE_READ_REG(hw, IXGBE_GOTCL); + IXGBE_READ_REG(hw, IXGBE_GOTCH); + if (hw->mac.type == ixgbe_mac_82598EB) + for (i = 0; i < 8; i++) + IXGBE_READ_REG(hw, IXGBE_RNBC(i)); + IXGBE_READ_REG(hw, IXGBE_RUC); + IXGBE_READ_REG(hw, IXGBE_RFC); + IXGBE_READ_REG(hw, IXGBE_ROC); + IXGBE_READ_REG(hw, IXGBE_RJC); + IXGBE_READ_REG(hw, IXGBE_MNGPRC); + IXGBE_READ_REG(hw, IXGBE_MNGPDC); + IXGBE_READ_REG(hw, IXGBE_MNGPTC); + IXGBE_READ_REG(hw, IXGBE_TORL); + IXGBE_READ_REG(hw, IXGBE_TORH); + IXGBE_READ_REG(hw, IXGBE_TPR); + IXGBE_READ_REG(hw, IXGBE_TPT); + IXGBE_READ_REG(hw, IXGBE_PTC64); + IXGBE_READ_REG(hw, IXGBE_PTC127); + IXGBE_READ_REG(hw, IXGBE_PTC255); + IXGBE_READ_REG(hw, IXGBE_PTC511); + IXGBE_READ_REG(hw, IXGBE_PTC1023); + IXGBE_READ_REG(hw, IXGBE_PTC1522); + IXGBE_READ_REG(hw, IXGBE_MPTC); + IXGBE_READ_REG(hw, IXGBE_BPTC); + for (i = 0; i < 16; i++) { + IXGBE_READ_REG(hw, IXGBE_QPRC(i)); + IXGBE_READ_REG(hw, IXGBE_QPTC(i)); + if (hw->mac.type >= ixgbe_mac_82599EB) { + IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); + IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); + IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); + IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); + IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); + } else { + IXGBE_READ_REG(hw, IXGBE_QBRC(i)); + IXGBE_READ_REG(hw, IXGBE_QBTC(i)); + } + } + + if (hw->mac.type == ixgbe_mac_X540) { + if (hw->phy.id == 0) + ixgbe_identify_phy(hw); + hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECL, + IXGBE_MDIO_PCS_DEV_TYPE, &i); + hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECH, + IXGBE_MDIO_PCS_DEV_TYPE, &i); + hw->phy.ops.read_reg(hw, IXGBE_LDPCECL, + IXGBE_MDIO_PCS_DEV_TYPE, &i); + hw->phy.ops.read_reg(hw, IXGBE_LDPCECH, + IXGBE_MDIO_PCS_DEV_TYPE, &i); + } + + return 0; +} + +/** + * ixgbe_read_pba_string_generic - Reads part number string from EEPROM + * @hw: pointer to hardware structure + * @pba_num: stores the part number string from the EEPROM + * @pba_num_size: part number string buffer length + * + * Reads the part number string from the EEPROM. + **/ +s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, + u32 pba_num_size) +{ + s32 ret_val; + u16 data; + u16 pba_ptr; + u16 offset; + u16 length; + + if (pba_num == NULL) { + hw_dbg(hw, "PBA string buffer was null\n"); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + + ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + + /* + * if data is not ptr guard the PBA must be in legacy format which + * means pba_ptr is actually our second data word for the PBA number + * and we can decode it into an ascii string + */ + if (data != IXGBE_PBANUM_PTR_GUARD) { + hw_dbg(hw, "NVM PBA number is not stored as string\n"); + + /* we will need 11 characters to store the PBA */ + if (pba_num_size < 11) { + hw_dbg(hw, "PBA string buffer too small\n"); + return IXGBE_ERR_NO_SPACE; + } + + /* extract hex string from data and pba_ptr */ + pba_num[0] = (data >> 12) & 0xF; + pba_num[1] = (data >> 8) & 0xF; + pba_num[2] = (data >> 4) & 0xF; + pba_num[3] = data & 0xF; + pba_num[4] = (pba_ptr >> 12) & 0xF; + pba_num[5] = (pba_ptr >> 8) & 0xF; + pba_num[6] = '-'; + pba_num[7] = 0; + pba_num[8] = (pba_ptr >> 4) & 0xF; + pba_num[9] = pba_ptr & 0xF; + + /* put a null character on the end of our string */ + pba_num[10] = '\0'; + + /* switch all the data but the '-' to hex char */ + for (offset = 0; offset < 10; offset++) { + if (pba_num[offset] < 0xA) + pba_num[offset] += '0'; + else if (pba_num[offset] < 0x10) + pba_num[offset] += 'A' - 0xA; + } + + return 0; + } + + ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + + if (length == 0xFFFF || length == 0) { + hw_dbg(hw, "NVM PBA number section invalid length\n"); + return IXGBE_ERR_PBA_SECTION; + } + + /* check if pba_num buffer is big enough */ + if (pba_num_size < (((u32)length * 2) - 1)) { + hw_dbg(hw, "PBA string buffer too small\n"); + return IXGBE_ERR_NO_SPACE; + } + + /* trim pba length from start of string */ + pba_ptr++; + length--; + + for (offset = 0; offset < length; offset++) { + ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + pba_num[offset * 2] = (u8)(data >> 8); + pba_num[(offset * 2) + 1] = (u8)(data & 0xFF); + } + pba_num[offset * 2] = '\0'; + + return 0; +} + +/** + * ixgbe_get_mac_addr_generic - Generic get MAC address + * @hw: pointer to hardware structure + * @mac_addr: Adapter MAC address + * + * Reads the adapter's MAC address from first Receive Address Register (RAR0) + * A reset of the adapter must be performed prior to calling this function + * in order for the MAC address to have been loaded from the EEPROM into RAR0 + **/ +s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) +{ + u32 rar_high; + u32 rar_low; + u16 i; + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0)); + rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0)); + + for (i = 0; i < 4; i++) + mac_addr[i] = (u8)(rar_low >> (i*8)); + + for (i = 0; i < 2; i++) + mac_addr[i+4] = (u8)(rar_high >> (i*8)); + + return 0; +} + +/** + * ixgbe_get_bus_info_generic - Generic set PCI bus info + * @hw: pointer to hardware structure + * + * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure + **/ +s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + u16 link_status; + + hw->bus.type = ixgbe_bus_type_pci_express; + + /* Get the negotiated link width and speed from PCI config space */ + link_status = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_LINK_STATUS); + + switch (link_status & IXGBE_PCI_LINK_WIDTH) { + case IXGBE_PCI_LINK_WIDTH_1: + hw->bus.width = ixgbe_bus_width_pcie_x1; + break; + case IXGBE_PCI_LINK_WIDTH_2: + hw->bus.width = ixgbe_bus_width_pcie_x2; + break; + case IXGBE_PCI_LINK_WIDTH_4: + hw->bus.width = ixgbe_bus_width_pcie_x4; + break; + case IXGBE_PCI_LINK_WIDTH_8: + hw->bus.width = ixgbe_bus_width_pcie_x8; + break; + default: + hw->bus.width = ixgbe_bus_width_unknown; + break; + } + + switch (link_status & IXGBE_PCI_LINK_SPEED) { + case IXGBE_PCI_LINK_SPEED_2500: + hw->bus.speed = ixgbe_bus_speed_2500; + break; + case IXGBE_PCI_LINK_SPEED_5000: + hw->bus.speed = ixgbe_bus_speed_5000; + break; + case IXGBE_PCI_LINK_SPEED_8000: + hw->bus.speed = ixgbe_bus_speed_8000; + break; + default: + hw->bus.speed = ixgbe_bus_speed_unknown; + break; + } + + mac->ops.set_lan_id(hw); + + return 0; +} + +/** + * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices + * @hw: pointer to the HW structure + * + * Determines the LAN function id by reading memory-mapped registers + * and swaps the port value if requested. + **/ +void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) +{ + struct ixgbe_bus_info *bus = &hw->bus; + u32 reg; + + reg = IXGBE_READ_REG(hw, IXGBE_STATUS); + bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT; + bus->lan_id = bus->func; + + /* check for a port swap */ + reg = IXGBE_READ_REG(hw, IXGBE_FACTPS); + if (reg & IXGBE_FACTPS_LFS) + bus->func ^= 0x1; +} + +/** + * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units + * @hw: pointer to hardware structure + * + * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, + * disables transmit and receive units. The adapter_stopped flag is used by + * the shared code and drivers to determine if the adapter is in a stopped + * state and should not touch the hardware. + **/ +s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) +{ + u32 reg_val; + u16 i; + + /* + * Set the adapter_stopped flag so other driver functions stop touching + * the hardware + */ + hw->adapter_stopped = true; + + /* Disable the receive unit */ + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, 0); + + /* Clear interrupt mask to stop interrupts from being generated */ + IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); + + /* Clear any pending interrupts, flush previous writes */ + IXGBE_READ_REG(hw, IXGBE_EICR); + + /* Disable the transmit unit. Each queue must be disabled. */ + for (i = 0; i < hw->mac.max_tx_queues; i++) + IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), IXGBE_TXDCTL_SWFLSH); + + /* Disable the receive unit by stopping each queue */ + for (i = 0; i < hw->mac.max_rx_queues; i++) { + reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); + reg_val &= ~IXGBE_RXDCTL_ENABLE; + reg_val |= IXGBE_RXDCTL_SWFLSH; + IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val); + } + + /* flush all queues disables */ + IXGBE_WRITE_FLUSH(hw); + msleep(2); + + /* + * Prevent the PCI-E bus from from hanging by disabling PCI-E master + * access and verify no pending requests + */ + return ixgbe_disable_pcie_master(hw); +} + +/** + * ixgbe_led_on_generic - Turns on the software controllable LEDs. + * @hw: pointer to hardware structure + * @index: led number to turn on + **/ +s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) +{ + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* To turn on the LED, set mode to ON. */ + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_led_off_generic - Turns off the software controllable LEDs. + * @hw: pointer to hardware structure + * @index: led number to turn off + **/ +s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) +{ + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* To turn off the LED, set mode to OFF. */ + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_init_eeprom_params_generic - Initialize EEPROM params + * @hw: pointer to hardware structure + * + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. + **/ +s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + u32 eec; + u16 eeprom_size; + + if (eeprom->type == ixgbe_eeprom_uninitialized) { + eeprom->type = ixgbe_eeprom_none; + /* Set default semaphore delay to 10ms which is a well + * tested value */ + eeprom->semaphore_delay = 10; + /* Clear EEPROM page size, it will be initialized as needed */ + eeprom->word_page_size = 0; + + /* + * Check for EEPROM present first. + * If not present leave as none + */ + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + if (eec & IXGBE_EEC_PRES) { + eeprom->type = ixgbe_eeprom_spi; + + /* + * SPI EEPROM is assumed here. This code would need to + * change if a future EEPROM is not SPI. + */ + eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> + IXGBE_EEC_SIZE_SHIFT); + eeprom->word_size = 1 << (eeprom_size + + IXGBE_EEPROM_WORD_SIZE_SHIFT); + } + + if (eec & IXGBE_EEC_ADDR_SIZE) + eeprom->address_bits = 16; + else + eeprom->address_bits = 8; + hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: " + "%d\n", eeprom->type, eeprom->word_size, + eeprom->address_bits); + } + + return 0; +} + +/** + * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to write + * @words: number of word(s) + * @data: 16 bit word(s) to write to EEPROM + * + * Reads 16 bit word(s) from EEPROM through bit-bang method + **/ +s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status = 0; + u16 i, count; + + hw->eeprom.ops.init_params(hw); + + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset + words > hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + /* + * The EEPROM page size cannot be queried from the chip. We do lazy + * initialization. It is worth to do that when we write large buffer. + */ + if ((hw->eeprom.word_page_size == 0) && + (words > IXGBE_EEPROM_PAGE_SIZE_MAX)) + ixgbe_detect_eeprom_page_size_generic(hw, offset); + + /* + * We cannot hold synchronization semaphores for too long + * to avoid other entity starvation. However it is more efficient + * to read in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { + count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? + IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i, + count, &data[i]); + + if (status != 0) + break; + } + +out: + return status; +} + +/** + * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @words: number of word(s) + * @data: 16 bit word(s) to be written to the EEPROM + * + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status; + u16 word; + u16 page_size; + u16 i; + u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; + + /* Prepare the EEPROM for writing */ + status = ixgbe_acquire_eeprom(hw); + + if (status == 0) { + if (ixgbe_ready_eeprom(hw) != 0) { + ixgbe_release_eeprom(hw); + status = IXGBE_ERR_EEPROM; + } + } + + if (status == 0) { + for (i = 0; i < words; i++) { + ixgbe_standby_eeprom(hw); + + /* Send the WRITE ENABLE command (8 bit opcode ) */ + ixgbe_shift_out_eeprom_bits(hw, + IXGBE_EEPROM_WREN_OPCODE_SPI, + IXGBE_EEPROM_OPCODE_BITS); + + ixgbe_standby_eeprom(hw); + + /* + * Some SPI eeproms use the 8th address bit embedded + * in the opcode + */ + if ((hw->eeprom.address_bits == 8) && + ((offset + i) >= 128)) + write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + + /* Send the Write command (8-bit opcode + addr) */ + ixgbe_shift_out_eeprom_bits(hw, write_opcode, + IXGBE_EEPROM_OPCODE_BITS); + ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), + hw->eeprom.address_bits); + + page_size = hw->eeprom.word_page_size; + + /* Send the data in burst via SPI*/ + do { + word = data[i]; + word = (word >> 8) | (word << 8); + ixgbe_shift_out_eeprom_bits(hw, word, 16); + + if (page_size == 0) + break; + + /* do not wrap around page */ + if (((offset + i) & (page_size - 1)) == + (page_size - 1)) + break; + } while (++i < words); + + ixgbe_standby_eeprom(hw); + msleep(10); + } + /* Done with writing - release the EEPROM */ + ixgbe_release_eeprom(hw); + } + + return status; +} + +/** + * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @data: 16 bit word to be written to the EEPROM + * + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + s32 status; + + hw->eeprom.ops.init_params(hw); + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data); + +out: + return status; +} + +/** + * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @data: read 16 bit words(s) from EEPROM + * @words: number of word(s) + * + * Reads 16 bit word(s) from EEPROM through bit-bang method + **/ +s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status = 0; + u16 i, count; + + hw->eeprom.ops.init_params(hw); + + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset + words > hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + /* + * We cannot hold synchronization semaphores for too long + * to avoid other entity starvation. However it is more efficient + * to read in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { + count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? + IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i, + count, &data[i]); + + if (status != 0) + break; + } + +out: + return status; +} + +/** + * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @words: number of word(s) + * @data: read 16 bit word(s) from EEPROM + * + * Reads 16 bit word(s) from EEPROM through bit-bang method + **/ +static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status; + u16 word_in; + u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; + u16 i; + + /* Prepare the EEPROM for reading */ + status = ixgbe_acquire_eeprom(hw); + + if (status == 0) { + if (ixgbe_ready_eeprom(hw) != 0) { + ixgbe_release_eeprom(hw); + status = IXGBE_ERR_EEPROM; + } + } + + if (status == 0) { + for (i = 0; i < words; i++) { + ixgbe_standby_eeprom(hw); + /* + * Some SPI eeproms use the 8th address bit embedded + * in the opcode + */ + if ((hw->eeprom.address_bits == 8) && + ((offset + i) >= 128)) + read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + + /* Send the READ command (opcode + addr) */ + ixgbe_shift_out_eeprom_bits(hw, read_opcode, + IXGBE_EEPROM_OPCODE_BITS); + ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), + hw->eeprom.address_bits); + + /* Read the data. */ + word_in = ixgbe_shift_in_eeprom_bits(hw, 16); + data[i] = (word_in >> 8) | (word_in << 8); + } + + /* End this read operation */ + ixgbe_release_eeprom(hw); + } + + return status; +} + +/** + * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @data: read 16 bit value from EEPROM + * + * Reads 16 bit value from EEPROM through bit-bang method + **/ +s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 *data) +{ + s32 status; + + hw->eeprom.ops.init_params(hw); + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); + +out: + return status; +} + +/** + * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of word(s) + * @data: 16 bit word(s) from the EEPROM + * + * Reads a 16 bit word(s) from the EEPROM using the EERD register. + **/ +s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + u32 eerd; + s32 status = 0; + u32 i; + + hw->eeprom.ops.init_params(hw); + + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + for (i = 0; i < words; i++) { + eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) + + IXGBE_EEPROM_RW_REG_START; + + IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ); + + if (status == 0) { + data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >> + IXGBE_EEPROM_RW_REG_DATA); + } else { + hw_dbg(hw, "Eeprom read timed out\n"); + goto out; + } + } +out: + return status; +} + +/** + * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be used as a scratch pad + * + * Discover EEPROM page size by writing marching data at given offset. + * This function is called only when we are writing a new large buffer + * at given offset so the data would be overwritten anyway. + **/ +static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, + u16 offset) +{ + u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX]; + s32 status = 0; + u16 i; + + for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++) + data[i] = i; + + hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX; + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, + IXGBE_EEPROM_PAGE_SIZE_MAX, data); + hw->eeprom.word_page_size = 0; + if (status != 0) + goto out; + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); + if (status != 0) + goto out; + + /* + * When writing in burst more than the actual page size + * EEPROM address wraps around current page. + */ + hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0]; + + hw_dbg(hw, "Detected EEPROM page size = %d words.", + hw->eeprom.word_page_size); +out: + return status; +} + +/** + * ixgbe_read_eerd_generic - Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data); +} + +/** + * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of word(s) + * @data: word(s) write to the EEPROM + * + * Write a 16 bit word(s) to the EEPROM using the EEWR register. + **/ +s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + u32 eewr; + s32 status = 0; + u16 i; + + hw->eeprom.ops.init_params(hw); + + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + for (i = 0; i < words; i++) { + eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | + (data[i] << IXGBE_EEPROM_RW_REG_DATA) | + IXGBE_EEPROM_RW_REG_START; + + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); + if (status != 0) { + hw_dbg(hw, "Eeprom write EEWR timed out\n"); + goto out; + } + + IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr); + + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); + if (status != 0) { + hw_dbg(hw, "Eeprom write EEWR timed out\n"); + goto out; + } + } + +out: + return status; +} + +/** + * ixgbe_write_eewr_generic - Write EEPROM word using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the EEWR register. + **/ +s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data); +} + +/** + * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status + * @hw: pointer to hardware structure + * @ee_reg: EEPROM flag for polling + * + * Polls the status bit (bit 1) of the EERD or EEWR to determine when the + * read or write is done respectively. + **/ +s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) +{ + u32 i; + u32 reg; + s32 status = IXGBE_ERR_EEPROM; + + for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) { + if (ee_reg == IXGBE_NVM_POLL_READ) + reg = IXGBE_READ_REG(hw, IXGBE_EERD); + else + reg = IXGBE_READ_REG(hw, IXGBE_EEWR); + + if (reg & IXGBE_EEPROM_RW_REG_DONE) { + status = 0; + break; + } + udelay(5); + } + return status; +} + +/** + * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang + * @hw: pointer to hardware structure + * + * Prepares EEPROM for access using bit-bang method. This function should + * be called before issuing a command to the EEPROM. + **/ +static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 eec; + u32 i; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) + != 0) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == 0) { + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + /* Request EEPROM Access */ + eec |= IXGBE_EEC_REQ; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + + for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) { + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + if (eec & IXGBE_EEC_GNT) + break; + udelay(5); + } + + /* Release if grant not acquired */ + if (!(eec & IXGBE_EEC_GNT)) { + eec &= ~IXGBE_EEC_REQ; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + hw_dbg(hw, "Could not acquire EEPROM grant\n"); + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + status = IXGBE_ERR_EEPROM; + } + + /* Setup EEPROM for Read/Write */ + if (status == 0) { + /* Clear CS and SK */ + eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); + } + } + return status; +} + +/** + * ixgbe_get_eeprom_semaphore - Get hardware semaphore + * @hw: pointer to hardware structure + * + * Sets the hardware semaphores so EEPROM access can occur for bit-bang method + **/ +static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_EEPROM; + u32 timeout = 2000; + u32 i; + u32 swsm; + + /* Get SMBI software semaphore between device drivers first */ + for (i = 0; i < timeout; i++) { + /* + * If the SMBI bit is 0 when we read it, then the bit will be + * set and we have the semaphore + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (!(swsm & IXGBE_SWSM_SMBI)) { + status = 0; + break; + } + udelay(50); + } + + if (i == timeout) { + hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore " + "not granted.\n"); + /* + * this release is particularly important because our attempts + * above to get the semaphore may have succeeded, and if there + * was a timeout, we should unconditionally clear the semaphore + * bits to free the driver to make progress + */ + ixgbe_release_eeprom_semaphore(hw); + + udelay(50); + /* + * one last try + * If the SMBI bit is 0 when we read it, then the bit will be + * set and we have the semaphore + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (!(swsm & IXGBE_SWSM_SMBI)) + status = 0; + } + + /* Now get the semaphore between SW/FW through the SWESMBI bit */ + if (status == 0) { + for (i = 0; i < timeout; i++) { + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + + /* Set the SW EEPROM semaphore bit to request access */ + swsm |= IXGBE_SWSM_SWESMBI; + IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); + + /* + * If we set the bit successfully then we got the + * semaphore. + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (swsm & IXGBE_SWSM_SWESMBI) + break; + + udelay(50); + } + + /* + * Release semaphores and return error if SW EEPROM semaphore + * was not granted because we don't have access to the EEPROM + */ + if (i >= timeout) { + hw_dbg(hw, "SWESMBI Software EEPROM semaphore " + "not granted.\n"); + ixgbe_release_eeprom_semaphore(hw); + status = IXGBE_ERR_EEPROM; + } + } else { + hw_dbg(hw, "Software semaphore SMBI between device drivers " + "not granted.\n"); + } + + return status; +} + +/** + * ixgbe_release_eeprom_semaphore - Release hardware semaphore + * @hw: pointer to hardware structure + * + * This function clears hardware semaphore bits. + **/ +static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) +{ + u32 swsm; + + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + + /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */ + swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI); + IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_ready_eeprom - Polls for EEPROM ready + * @hw: pointer to hardware structure + **/ +static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw) +{ + s32 status = 0; + u16 i; + u8 spi_stat_reg; + + /* + * Read "Status Register" repeatedly until the LSB is cleared. The + * EEPROM will signal that the command has been completed by clearing + * bit 0 of the internal status register. If it's not cleared within + * 5 milliseconds, then error out. + */ + for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) { + ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI, + IXGBE_EEPROM_OPCODE_BITS); + spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8); + if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI)) + break; + + udelay(5); + ixgbe_standby_eeprom(hw); + }; + + /* + * On some parts, SPI write time could vary from 0-20mSec on 3.3V + * devices (and only 0-5mSec on 5V devices) + */ + if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) { + hw_dbg(hw, "SPI EEPROM Status error\n"); + status = IXGBE_ERR_EEPROM; + } + + return status; +} + +/** + * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state + * @hw: pointer to hardware structure + **/ +static void ixgbe_standby_eeprom(struct ixgbe_hw *hw) +{ + u32 eec; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + /* Toggle CS to flush commands */ + eec |= IXGBE_EEC_CS; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); + eec &= ~IXGBE_EEC_CS; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); +} + +/** + * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM. + * @hw: pointer to hardware structure + * @data: data to send to the EEPROM + * @count: number of bits to shift out + **/ +static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, + u16 count) +{ + u32 eec; + u32 mask; + u32 i; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + /* + * Mask is used to shift "count" bits of "data" out to the EEPROM + * one bit at a time. Determine the starting bit based on count + */ + mask = 0x01 << (count - 1); + + for (i = 0; i < count; i++) { + /* + * A "1" is shifted out to the EEPROM by setting bit "DI" to a + * "1", and then raising and then lowering the clock (the SK + * bit controls the clock input to the EEPROM). A "0" is + * shifted out to the EEPROM by setting "DI" to "0" and then + * raising and then lowering the clock. + */ + if (data & mask) + eec |= IXGBE_EEC_DI; + else + eec &= ~IXGBE_EEC_DI; + + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + + udelay(1); + + ixgbe_raise_eeprom_clk(hw, &eec); + ixgbe_lower_eeprom_clk(hw, &eec); + + /* + * Shift mask to signify next bit of data to shift in to the + * EEPROM + */ + mask = mask >> 1; + }; + + /* We leave the "DI" bit set to "0" when we leave this routine. */ + eec &= ~IXGBE_EEC_DI; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM + * @hw: pointer to hardware structure + **/ +static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count) +{ + u32 eec; + u32 i; + u16 data = 0; + + /* + * In order to read a register from the EEPROM, we need to shift + * 'count' bits in from the EEPROM. Bits are "shifted in" by raising + * the clock input to the EEPROM (setting the SK bit), and then reading + * the value of the "DO" bit. During this "shifting in" process the + * "DI" bit should always be clear. + */ + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI); + + for (i = 0; i < count; i++) { + data = data << 1; + ixgbe_raise_eeprom_clk(hw, &eec); + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + eec &= ~(IXGBE_EEC_DI); + if (eec & IXGBE_EEC_DO) + data |= 1; + + ixgbe_lower_eeprom_clk(hw, &eec); + } + + return data; +} + +/** + * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input. + * @hw: pointer to hardware structure + * @eec: EEC register's current value + **/ +static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) +{ + /* + * Raise the clock input to the EEPROM + * (setting the SK bit), then delay + */ + *eec = *eec | IXGBE_EEC_SK; + IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); +} + +/** + * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input. + * @hw: pointer to hardware structure + * @eecd: EECD's current value + **/ +static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) +{ + /* + * Lower the clock input to the EEPROM (clearing the SK bit), then + * delay + */ + *eec = *eec & ~IXGBE_EEC_SK; + IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); +} + +/** + * ixgbe_release_eeprom - Release EEPROM, release semaphores + * @hw: pointer to hardware structure + **/ +static void ixgbe_release_eeprom(struct ixgbe_hw *hw) +{ + u32 eec; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + eec |= IXGBE_EEC_CS; /* Pull CS high */ + eec &= ~IXGBE_EEC_SK; /* Lower SCK */ + + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + + udelay(1); + + /* Stop requesting EEPROM access */ + eec &= ~IXGBE_EEC_REQ; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + + /* Delay before attempt to obtain semaphore again to allow FW access */ + msleep(hw->eeprom.semaphore_delay); +} + +/** + * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum + * @hw: pointer to hardware structure + **/ +u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) +{ + u16 i; + u16 j; + u16 checksum = 0; + u16 length = 0; + u16 pointer = 0; + u16 word = 0; + + /* Include 0x0-0x3F in the checksum */ + for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { + if (hw->eeprom.ops.read(hw, i, &word) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + checksum += word; + } + + /* Include all data from pointers except for the fw pointer */ + for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { + hw->eeprom.ops.read(hw, i, &pointer); + + /* Make sure the pointer seems valid */ + if (pointer != 0xFFFF && pointer != 0) { + hw->eeprom.ops.read(hw, pointer, &length); + + if (length != 0xFFFF && length != 0) { + for (j = pointer+1; j <= pointer+length; j++) { + hw->eeprom.ops.read(hw, j, &word); + checksum += word; + } + } + } + } + + checksum = (u16)IXGBE_EEPROM_SUM - checksum; + + return checksum; +} + +/** + * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum + * + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. + **/ +s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, + u16 *checksum_val) +{ + s32 status; + u16 checksum; + u16 read_checksum = 0; + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + + if (status == 0) { + checksum = hw->eeprom.ops.calc_checksum(hw); + + hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum); + + /* + * Verify read checksum from EEPROM is the same as + * calculated checksum + */ + if (read_checksum != checksum) + status = IXGBE_ERR_EEPROM_CHECKSUM; + + /* If the user cares, return the calculated checksum */ + if (checksum_val) + *checksum_val = checksum; + } else { + hw_dbg(hw, "EEPROM read failed\n"); + } + + return status; +} + +/** + * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum + * @hw: pointer to hardware structure + **/ +s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) +{ + s32 status; + u16 checksum; + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + + if (status == 0) { + checksum = hw->eeprom.ops.calc_checksum(hw); + status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, + checksum); + } else { + hw_dbg(hw, "EEPROM read failed\n"); + } + + return status; +} + +/** + * ixgbe_validate_mac_addr - Validate MAC address + * @mac_addr: pointer to MAC address. + * + * Tests a MAC address to ensure it is a valid Individual Address + **/ +s32 ixgbe_validate_mac_addr(u8 *mac_addr) +{ + s32 status = 0; + + /* Make sure it is not a multicast address */ + if (IXGBE_IS_MULTICAST(mac_addr)) { + hw_dbg(hw, "MAC address is multicast\n"); + status = IXGBE_ERR_INVALID_MAC_ADDR; + /* Not a broadcast address */ + } else if (IXGBE_IS_BROADCAST(mac_addr)) { + hw_dbg(hw, "MAC address is broadcast\n"); + status = IXGBE_ERR_INVALID_MAC_ADDR; + /* Reject the zero address */ + } else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 && + mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) { + hw_dbg(hw, "MAC address is all zeros\n"); + status = IXGBE_ERR_INVALID_MAC_ADDR; + } + return status; +} + +/** + * ixgbe_set_rar_generic - Set Rx address register + * @hw: pointer to hardware structure + * @index: Receive address register to write + * @addr: Address to put into receive address register + * @vmdq: VMDq "set" or "pool" index + * @enable_addr: set flag that address is active + * + * Puts an ethernet address into a receive address register. + **/ +s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, + u32 enable_addr) +{ + u32 rar_low, rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (index >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", index); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + /* setup VMDq pool selection before this RAR gets enabled */ + hw->mac.ops.set_vmdq(hw, index, vmdq); + + /* + * HW expects these in little endian so we reverse the byte + * order from network order (big endian) to little endian + */ + rar_low = ((u32)addr[0] | + ((u32)addr[1] << 8) | + ((u32)addr[2] << 16) | + ((u32)addr[3] << 24)); + /* + * Some parts put the VMDq setting in the extra RAH bits, + * so save everything except the lower 16 bits that hold part + * of the address and the address valid bit. + */ + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); + rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); + rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8)); + + if (enable_addr != 0) + rar_high |= IXGBE_RAH_AV; + + IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low); + IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); + + return 0; +} + +/** + * ixgbe_clear_rar_generic - Remove Rx address register + * @hw: pointer to hardware structure + * @index: Receive address register to write + * + * Clears an ethernet address from a receive address register. + **/ +s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) +{ + u32 rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (index >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", index); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + /* + * Some parts put the VMDq setting in the extra RAH bits, + * so save everything except the lower 16 bits that hold part + * of the address and the address valid bit. + */ + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); + rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); + + IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); + IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); + + /* clear VMDq pool/queue selection for this RAR */ + hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL); + + return 0; +} + +/** + * ixgbe_init_rx_addrs_generic - Initializes receive address filters. + * @hw: pointer to hardware structure + * + * Places the MAC address in receive address register 0 and clears the rest + * of the receive address registers. Clears the multicast table. Assumes + * the receiver is in reset when the routine is called. + **/ +s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) +{ + u32 i; + u32 rar_entries = hw->mac.num_rar_entries; + + /* + * If the current mac address is valid, assume it is a software override + * to the permanent address. + * Otherwise, use the permanent address from the eeprom. + */ + if (ixgbe_validate_mac_addr(hw->mac.addr) == + IXGBE_ERR_INVALID_MAC_ADDR) { + /* Get the MAC address from the RAR0 for later reference */ + hw->mac.ops.get_mac_addr(hw, hw->mac.addr); + + hw_dbg(hw, " Keeping Current RAR0 Addr =%.2X %.2X %.2X ", + hw->mac.addr[0], hw->mac.addr[1], + hw->mac.addr[2]); + hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3], + hw->mac.addr[4], hw->mac.addr[5]); + } else { + /* Setup the receive address. */ + hw_dbg(hw, "Overriding MAC Address in RAR[0]\n"); + hw_dbg(hw, " New MAC Addr =%.2X %.2X %.2X ", + hw->mac.addr[0], hw->mac.addr[1], + hw->mac.addr[2]); + hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3], + hw->mac.addr[4], hw->mac.addr[5]); + + hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV); + + /* clear VMDq pool/queue selection for RAR 0 */ + hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL); + } + hw->addr_ctrl.overflow_promisc = 0; + + hw->addr_ctrl.rar_used_count = 1; + + /* Zero out the other receive addresses. */ + hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1); + for (i = 1; i < rar_entries; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); + } + + /* Clear the MTA */ + hw->addr_ctrl.mta_in_use = 0; + IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); + + hw_dbg(hw, " Clearing MTA\n"); + for (i = 0; i < hw->mac.mcft_size; i++) + IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); + + ixgbe_init_uta_tables(hw); + + return 0; +} + +/** + * ixgbe_add_uc_addr - Adds a secondary unicast address. + * @hw: pointer to hardware structure + * @addr: new address + * + * Adds it to unused receive address register or goes into promiscuous mode. + **/ +void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) +{ + u32 rar_entries = hw->mac.num_rar_entries; + u32 rar; + + hw_dbg(hw, " UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); + + /* + * Place this address in the RAR if there is room, + * else put the controller into promiscuous mode + */ + if (hw->addr_ctrl.rar_used_count < rar_entries) { + rar = hw->addr_ctrl.rar_used_count; + hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV); + hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar); + hw->addr_ctrl.rar_used_count++; + } else { + hw->addr_ctrl.overflow_promisc++; + } + + hw_dbg(hw, "ixgbe_add_uc_addr Complete\n"); +} + +/** + * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses + * @hw: pointer to hardware structure + * @addr_list: the list of new addresses + * @addr_count: number of addresses + * @next: iterator function to walk the address list + * + * The given list replaces any existing list. Clears the secondary addrs from + * receive address registers. Uses unused receive address registers for the + * first secondary addresses, and falls back to promiscuous mode as needed. + * + * Drivers using secondary unicast addresses must set user_set_promisc when + * manually putting the device into promiscuous mode. + **/ +s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list, + u32 addr_count, ixgbe_mc_addr_itr next) +{ + u8 *addr; + u32 i; + u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc; + u32 uc_addr_in_use; + u32 fctrl; + u32 vmdq; + + /* + * Clear accounting of old secondary address list, + * don't count RAR[0] + */ + uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1; + hw->addr_ctrl.rar_used_count -= uc_addr_in_use; + hw->addr_ctrl.overflow_promisc = 0; + + /* Zero out the other receive addresses */ + hw_dbg(hw, "Clearing RAR[1-%d]\n", uc_addr_in_use+1); + for (i = 0; i < uc_addr_in_use; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RAL(1+i), 0); + IXGBE_WRITE_REG(hw, IXGBE_RAH(1+i), 0); + } + + /* Add the new addresses */ + for (i = 0; i < addr_count; i++) { + hw_dbg(hw, " Adding the secondary addresses:\n"); + addr = next(hw, &addr_list, &vmdq); + ixgbe_add_uc_addr(hw, addr, vmdq); + } + + if (hw->addr_ctrl.overflow_promisc) { + /* enable promisc if not already in overflow or set by user */ + if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { + hw_dbg(hw, " Entering address overflow promisc mode\n"); + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl |= IXGBE_FCTRL_UPE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + } + } else { + /* only disable if set by overflow, not by user */ + if (old_promisc_setting && !hw->addr_ctrl.user_set_promisc) { + hw_dbg(hw, " Leaving address overflow promisc mode\n"); + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl &= ~IXGBE_FCTRL_UPE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + } + } + + hw_dbg(hw, "ixgbe_update_uc_addr_list_generic Complete\n"); + return 0; +} + +/** + * ixgbe_mta_vector - Determines bit-vector in multicast table to set + * @hw: pointer to hardware structure + * @mc_addr: the multicast address + * + * Extracts the 12 bits, from a multicast address, to determine which + * bit-vector to set in the multicast table. The hardware uses 12 bits, from + * incoming rx multicast addresses, to determine the bit-vector to check in + * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set + * by the MO field of the MCSTCTRL. The MO field is set during initialization + * to mc_filter_type. + **/ +static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) +{ + u32 vector = 0; + + switch (hw->mac.mc_filter_type) { + case 0: /* use bits [47:36] of the address */ + vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); + break; + case 1: /* use bits [46:35] of the address */ + vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); + break; + case 2: /* use bits [45:34] of the address */ + vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); + break; + case 3: /* use bits [43:32] of the address */ + vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); + break; + default: /* Invalid mc_filter_type */ + hw_dbg(hw, "MC filter type param set incorrectly\n"); + break; + } + + /* vector can only be 12-bits or boundary will be exceeded */ + vector &= 0xFFF; + return vector; +} + +/** + * ixgbe_set_mta - Set bit-vector in multicast table + * @hw: pointer to hardware structure + * @hash_value: Multicast address hash value + * + * Sets the bit-vector in the multicast table. + **/ +void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) +{ + u32 vector; + u32 vector_bit; + u32 vector_reg; + + hw->addr_ctrl.mta_in_use++; + + vector = ixgbe_mta_vector(hw, mc_addr); + hw_dbg(hw, " bit-vector = 0x%03X\n", vector); + + /* + * The MTA is a register array of 128 32-bit registers. It is treated + * like an array of 4096 bits. We want to set bit + * BitArray[vector_value]. So we figure out what register the bit is + * in, read it, OR in the new bit, then write back the new value. The + * register is determined by the upper 7 bits of the vector value and + * the bit within that register are determined by the lower 5 bits of + * the value. + */ + vector_reg = (vector >> 5) & 0x7F; + vector_bit = vector & 0x1F; + hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit); +} + +/** + * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses + * @hw: pointer to hardware structure + * @mc_addr_list: the list of new multicast addresses + * @mc_addr_count: number of addresses + * @next: iterator function to walk the multicast address list + * @clear: flag, when set clears the table beforehand + * + * When the clear flag is set, the given list replaces any existing list. + * Hashes the given addresses into the multicast table. + **/ +s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count, ixgbe_mc_addr_itr next, + bool clear) +{ + u32 i; + u32 vmdq; + + /* + * Set the new number of MC addresses that we are being requested to + * use. + */ + hw->addr_ctrl.num_mc_addrs = mc_addr_count; + hw->addr_ctrl.mta_in_use = 0; + + /* Clear mta_shadow */ + if (clear) { + hw_dbg(hw, " Clearing MTA\n"); + memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); + } + + /* Update mta_shadow */ + for (i = 0; i < mc_addr_count; i++) { + hw_dbg(hw, " Adding the multicast addresses:\n"); + ixgbe_set_mta(hw, next(hw, &mc_addr_list, &vmdq)); + } + + /* Enable mta */ + for (i = 0; i < hw->mac.mcft_size; i++) + IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i, + hw->mac.mta_shadow[i]); + + if (hw->addr_ctrl.mta_in_use > 0) + IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, + IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type); + + hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n"); + return 0; +} + +/** + * ixgbe_enable_mc_generic - Enable multicast address in RAR + * @hw: pointer to hardware structure + * + * Enables multicast address in RAR and the use of the multicast hash table. + **/ +s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; + + if (a->mta_in_use > 0) + IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE | + hw->mac.mc_filter_type); + + return 0; +} + +/** + * ixgbe_disable_mc_generic - Disable multicast address in RAR + * @hw: pointer to hardware structure + * + * Disables multicast address in RAR and the use of the multicast hash table. + **/ +s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; + + if (a->mta_in_use > 0) + IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); + + return 0; +} + +/** + * ixgbe_fc_enable_generic - Enable flow control + * @hw: pointer to hardware structure + * + * Enable flow control according to the current settings. + **/ +s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + u32 mflcn_reg, fccfg_reg; + u32 reg; + u32 fcrtl, fcrth; + int i; + + /* Validate the water mark configuration */ + if (!hw->fc.pause_time) { + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* Low water mark of zero causes XOFF floods */ + for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { + if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && + hw->fc.high_water[i]) { + if (!hw->fc.low_water[i] || + hw->fc.low_water[i] >= hw->fc.high_water[i]) { + hw_dbg(hw, "Invalid water mark configuration\n"); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + } + } + + /* Negotiate the fc mode to use */ + ixgbe_fc_autoneg(hw); + + /* Disable any previous flow control settings */ + mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN); + mflcn_reg &= ~(IXGBE_MFLCN_RPFCE_MASK | IXGBE_MFLCN_RFCE); + + fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG); + fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY); + + /* + * The possible values of fc.current_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: Invalid. + */ + switch (hw->fc.current_mode) { + case ixgbe_fc_none: + /* + * Flow control is disabled by software override or autoneg. + * The code below will actually disable it in the HW. + */ + break; + case ixgbe_fc_rx_pause: + /* + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + mflcn_reg |= IXGBE_MFLCN_RFCE; + break; + case ixgbe_fc_tx_pause: + /* + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; + break; + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + mflcn_reg |= IXGBE_MFLCN_RFCE; + fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; + break; + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = IXGBE_ERR_CONFIG; + goto out; + break; + } + + /* Set 802.3x based flow control settings. */ + mflcn_reg |= IXGBE_MFLCN_DPF; + IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg); + IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg); + + + /* Set up and enable Rx high/low water mark thresholds, enable XON. */ + for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { + if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && + hw->fc.high_water[i]) { + fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE; + IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), fcrtl); + fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN; + } else { + IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0); + /* + * In order to prevent Tx hangs when the internal Tx + * switch is enabled we must set the high water mark + * to the maximum FCRTH value. This allows the Tx + * switch to function even under heavy Rx workloads. + */ + fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)) - 32; + } + + IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), fcrth); + } + + /* Configure pause time (2 TCs per register) */ + reg = hw->fc.pause_time * 0x00010001; + for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++) + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); + + /* Configure flow control refresh threshold value */ + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); + +out: + return ret_val; +} + +/** + * ixgbe_negotiate_fc - Negotiate flow control + * @hw: pointer to hardware structure + * @adv_reg: flow control advertised settings + * @lp_reg: link partner's flow control settings + * @adv_sym: symmetric pause bit in advertisement + * @adv_asm: asymmetric pause bit in advertisement + * @lp_sym: symmetric pause bit in link partner advertisement + * @lp_asm: asymmetric pause bit in link partner advertisement + * + * Find the intersection between advertised settings and link partner's + * advertised settings + **/ +static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, + u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm) +{ + if (!adv_reg || !lp_reg) + return IXGBE_ERR_FC_NOT_NEGOTIATED; + + if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) { + /* + * Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise RX + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == ixgbe_fc_full) { + hw->fc.current_mode = ixgbe_fc_full; + hw_dbg(hw, "Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_rx_pause; + hw_dbg(hw, "Flow Control=RX PAUSE frames only\n"); + } + } else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) && + (lp_reg & lp_sym) && (lp_reg & lp_asm)) { + hw->fc.current_mode = ixgbe_fc_tx_pause; + hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); + } else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) && + !(lp_reg & lp_sym) && (lp_reg & lp_asm)) { + hw->fc.current_mode = ixgbe_fc_rx_pause; + hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_none; + hw_dbg(hw, "Flow Control = NONE.\n"); + } + return 0; +} + +/** + * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber + * @hw: pointer to hardware structure + * + * Enable flow control according on 1 gig fiber. + **/ +static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) +{ + u32 pcs_anadv_reg, pcs_lpab_reg, linkstat; + s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; + + /* + * On multispeed fiber at 1g, bail out if + * - link is up but AN did not complete, or if + * - link is up and AN completed but timed out + */ + + linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); + if ((!!(linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) || + (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) + goto out; + + pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); + pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); + + ret_val = ixgbe_negotiate_fc(hw, pcs_anadv_reg, + pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE, + IXGBE_PCS1GANA_ASM_PAUSE, + IXGBE_PCS1GANA_SYM_PAUSE, + IXGBE_PCS1GANA_ASM_PAUSE); + +out: + return ret_val; +} + +/** + * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure + * + * Enable flow control according to IEEE clause 37. + **/ +static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) +{ + u32 links2, anlp1_reg, autoc_reg, links; + s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; + + /* + * On backplane, bail out if + * - backplane autoneg was not completed, or if + * - we are 82599 and link partner is not AN enabled + */ + links = IXGBE_READ_REG(hw, IXGBE_LINKS); + if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) + goto out; + + if (hw->mac.type == ixgbe_mac_82599EB) { + links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2); + if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) + goto out; + } + /* + * Read the 10g AN autoc and LP ability registers and resolve + * local flow control settings accordingly + */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1); + + ret_val = ixgbe_negotiate_fc(hw, autoc_reg, + anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE, + IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE); + +out: + return ret_val; +} + +/** + * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure + * + * Enable flow control according to IEEE clause 37. + **/ +static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw) +{ + u16 technology_ability_reg = 0; + u16 lp_technology_ability_reg = 0; + + hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_ADVT, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &technology_ability_reg); + hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_LP, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &lp_technology_ability_reg); + + return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg, + (u32)lp_technology_ability_reg, + IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE, + IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE); +} + +/** + * ixgbe_fc_autoneg - Configure flow control + * @hw: pointer to hardware structure + * + * Compares our advertised flow control capabilities to those advertised by + * our link partner, and determines the proper flow control mode to use. + **/ +void ixgbe_fc_autoneg(struct ixgbe_hw *hw) +{ + s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; + ixgbe_link_speed speed; + bool link_up; + + /* + * AN should have completed when the cable was plugged in. + * Look for reasons to bail out. Bail out if: + * - FC autoneg is disabled, or if + * - link is not up. + */ + if (hw->fc.disable_fc_autoneg) + goto out; + + hw->mac.ops.check_link(hw, &speed, &link_up, false); + if (!link_up) + goto out; + + switch (hw->phy.media_type) { + /* Autoneg flow control on fiber adapters */ + case ixgbe_media_type_fiber: + if (speed == IXGBE_LINK_SPEED_1GB_FULL) + ret_val = ixgbe_fc_autoneg_fiber(hw); + break; + + /* Autoneg flow control on backplane adapters */ + case ixgbe_media_type_backplane: + ret_val = ixgbe_fc_autoneg_backplane(hw); + break; + + /* Autoneg flow control on copper adapters */ + case ixgbe_media_type_copper: + if (ixgbe_device_supports_autoneg_fc(hw) == 0) + ret_val = ixgbe_fc_autoneg_copper(hw); + break; + + default: + break; + } + +out: + if (ret_val == 0) { + hw->fc.fc_was_autonegged = true; + } else { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + } +} + +/** + * ixgbe_disable_pcie_master - Disable PCI-express master access + * @hw: pointer to hardware structure + * + * Disables PCI-Express master access and verifies there are no pending + * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable + * bit hasn't caused the master requests to be disabled, else 0 + * is returned signifying master requests disabled. + **/ +s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 i; + + /* Always set this bit to ensure any future transactions are blocked */ + IXGBE_WRITE_REG(hw, IXGBE_CTRL, IXGBE_CTRL_GIO_DIS); + + /* Exit if master requets are blocked */ + if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) + goto out; + + /* Poll for master request bit to clear */ + for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { + udelay(100); + if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) + goto out; + } + + /* + * Two consecutive resets are required via CTRL.RST per datasheet + * 5.2.5.3.2 Master Disable. We set a flag to inform the reset routine + * of this need. The first reset prevents new master requests from + * being issued by our device. We then must wait 1usec or more for any + * remaining completions from the PCIe bus to trickle in, and then reset + * again to clear out any effects they may have had on our device. + */ + hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n"); + hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + + /* + * Before proceeding, make sure that the PCIe block does not have + * transactions pending. + */ + for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { + udelay(100); + if (!(IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_STATUS) & + IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING)) + goto out; + } + + hw_dbg(hw, "PCIe transaction pending bit also did not clear.\n"); + status = IXGBE_ERR_MASTER_REQUESTS_PENDING; + +out: + return status; +} + +/** + * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore through the GSSR register for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) + **/ +s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) +{ + u32 gssr; + u32 swmask = mask; + u32 fwmask = mask << 5; + s32 timeout = 200; + + while (timeout) { + /* + * SW EEPROM semaphore bit is used for access to all + * SW_FW_SYNC/GSSR bits (not just EEPROM) + */ + if (ixgbe_get_eeprom_semaphore(hw)) + return IXGBE_ERR_SWFW_SYNC; + + gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); + if (!(gssr & (fwmask | swmask))) + break; + + /* + * Firmware currently using resource (fwmask) or other software + * thread currently using resource (swmask) + */ + ixgbe_release_eeprom_semaphore(hw); + msleep(5); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Driver can't access resource, SW_FW_SYNC timeout.\n"); + return IXGBE_ERR_SWFW_SYNC; + } + + gssr |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); + + ixgbe_release_eeprom_semaphore(hw); + return 0; +} + +/** + * ixgbe_release_swfw_sync - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore through the GSSR register for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) + **/ +void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask) +{ + u32 gssr; + u32 swmask = mask; + + ixgbe_get_eeprom_semaphore(hw); + + gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); + gssr &= ~swmask; + IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); + + ixgbe_release_eeprom_semaphore(hw); +} + +/** + * ixgbe_disable_sec_rx_path_generic - Stops the receive data path + * @hw: pointer to hardware structure + * + * Stops the receive data path and waits for the HW to internally empty + * the Rx security block + **/ +s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw) +{ +#define IXGBE_MAX_SECRX_POLL 40 + + int i; + int secrxreg; + + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + secrxreg |= IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); + for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) { + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT); + if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY) + break; + else + /* Use interrupt-safe sleep just in case */ + udelay(1000); + } + + /* For informational purposes only */ + if (i >= IXGBE_MAX_SECRX_POLL) + hw_dbg(hw, "Rx unit being enabled before security " + "path fully disabled. Continuing with init.\n"); + + return 0; +} + +/** + * ixgbe_enable_sec_rx_path_generic - Enables the receive data path + * @hw: pointer to hardware structure + * + * Enables the receive data path. + **/ +s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw) +{ + int secrxreg; + + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL + * + * Enables the Rx DMA unit + **/ +s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) +{ + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); + + return 0; +} + +/** + * ixgbe_blink_led_start_generic - Blink LED based on index. + * @hw: pointer to hardware structure + * @index: led number to blink + **/ +s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) +{ + ixgbe_link_speed speed = 0; + bool link_up = 0; + u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* + * Link must be up to auto-blink the LEDs; + * Force it if link is down. + */ + hw->mac.ops.check_link(hw, &speed, &link_up, false); + + if (!link_up) { + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + autoc_reg |= IXGBE_AUTOC_FLU; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + IXGBE_WRITE_FLUSH(hw); + msleep(10); + } + + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_blink_led_stop_generic - Stop blinking LED based on index. + * @hw: pointer to hardware structure + * @index: led number to stop blinking + **/ +s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) +{ + u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + autoc_reg &= ~IXGBE_AUTOC_FLU; + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg &= ~IXGBE_LED_BLINK(index); + led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM + * @hw: pointer to hardware structure + * @san_mac_offset: SAN MAC address offset + * + * This function will read the EEPROM location for the SAN MAC address + * pointer, and returns the value at that location. This is used in both + * get and set mac_addr routines. + **/ +static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, + u16 *san_mac_offset) +{ + /* + * First read the EEPROM pointer to see if the MAC addresses are + * available. + */ + hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset); + + return 0; +} + +/** + * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address + * + * Reads the SAN MAC address from the EEPROM, if it's available. This is + * per-port, so set_lan_id() must be called before reading the addresses. + * set_lan_id() is called by identify_sfp(), but this cannot be relied + * upon for non-SFP connections, so we must call it here. + **/ +s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) +{ + u16 san_mac_data, san_mac_offset; + u8 i; + + /* + * First read the EEPROM pointer to see if the MAC addresses are + * available. If they're not, no point in calling set_lan_id() here. + */ + ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); + + if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { + /* + * No addresses available in this EEPROM. It's not an + * error though, so just wipe the local address and return. + */ + for (i = 0; i < 6; i++) + san_mac_addr[i] = 0xFF; + + goto san_mac_addr_out; + } + + /* make sure we know which port we need to program */ + hw->mac.ops.set_lan_id(hw); + /* apply the port offset to the address offset */ + (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : + (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); + for (i = 0; i < 3; i++) { + hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data); + san_mac_addr[i * 2] = (u8)(san_mac_data); + san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8); + san_mac_offset++; + } + +san_mac_addr_out: + return 0; +} + +/** + * ixgbe_set_san_mac_addr_generic - Write the SAN MAC address to the EEPROM + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address + * + * Write a SAN MAC address to the EEPROM. + **/ +s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) +{ + s32 status = 0; + u16 san_mac_data, san_mac_offset; + u8 i; + + /* Look for SAN mac address pointer. If not defined, return */ + ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); + + if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { + status = IXGBE_ERR_NO_SAN_ADDR_PTR; + goto san_mac_addr_out; + } + + /* Make sure we know which port we need to write */ + hw->mac.ops.set_lan_id(hw); + /* Apply the port offset to the address offset */ + (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : + (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); + + for (i = 0; i < 3; i++) { + san_mac_data = (u16)((u16)(san_mac_addr[i * 2 + 1]) << 8); + san_mac_data |= (u16)(san_mac_addr[i * 2]); + hw->eeprom.ops.write(hw, san_mac_offset, san_mac_data); + san_mac_offset++; + } + +san_mac_addr_out: + return status; +} + +/** + * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count + * @hw: pointer to hardware structure + * + * Read PCIe configuration space, and get the MSI-X vector count from + * the capabilities table. + **/ +u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw) +{ + u16 msix_count = 1; + u16 max_msix_count; + u16 pcie_offset; + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + pcie_offset = IXGBE_PCIE_MSIX_82598_CAPS; + max_msix_count = IXGBE_MAX_MSIX_VECTORS_82598; + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + pcie_offset = IXGBE_PCIE_MSIX_82599_CAPS; + max_msix_count = IXGBE_MAX_MSIX_VECTORS_82599; + break; + default: + return msix_count; + } + + msix_count = IXGBE_READ_PCIE_WORD(hw, pcie_offset); + msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; + + /* MSI-X count is zero-based in HW */ + msix_count++; + + if (msix_count > max_msix_count) + msix_count = max_msix_count; + + return msix_count; +} + +/** + * ixgbe_insert_mac_addr_generic - Find a RAR for this mac address + * @hw: pointer to hardware structure + * @addr: Address to put into receive address register + * @vmdq: VMDq pool to assign + * + * Puts an ethernet address into a receive address register, or + * finds the rar that it is already in; adds to the pool list + **/ +s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) +{ + static const u32 NO_EMPTY_RAR_FOUND = 0xFFFFFFFF; + u32 first_empty_rar = NO_EMPTY_RAR_FOUND; + u32 rar; + u32 rar_low, rar_high; + u32 addr_low, addr_high; + + /* swap bytes for HW little endian */ + addr_low = addr[0] | (addr[1] << 8) + | (addr[2] << 16) + | (addr[3] << 24); + addr_high = addr[4] | (addr[5] << 8); + + /* + * Either find the mac_id in rar or find the first empty space. + * rar_highwater points to just after the highest currently used + * rar in order to shorten the search. It grows when we add a new + * rar to the top. + */ + for (rar = 0; rar < hw->mac.rar_highwater; rar++) { + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); + + if (((IXGBE_RAH_AV & rar_high) == 0) + && first_empty_rar == NO_EMPTY_RAR_FOUND) { + first_empty_rar = rar; + } else if ((rar_high & 0xFFFF) == addr_high) { + rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(rar)); + if (rar_low == addr_low) + break; /* found it already in the rars */ + } + } + + if (rar < hw->mac.rar_highwater) { + /* already there so just add to the pool bits */ + ixgbe_set_vmdq(hw, rar, vmdq); + } else if (first_empty_rar != NO_EMPTY_RAR_FOUND) { + /* stick it into first empty RAR slot we found */ + rar = first_empty_rar; + ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV); + } else if (rar == hw->mac.rar_highwater) { + /* add it to the top of the list and inc the highwater mark */ + ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV); + hw->mac.rar_highwater++; + } else if (rar >= hw->mac.num_rar_entries) { + return IXGBE_ERR_INVALID_MAC_ADDR; + } + + /* + * If we found rar[0], make sure the default pool bit (we use pool 0) + * remains cleared to be sure default pool packets will get delivered + */ + if (rar == 0) + ixgbe_clear_vmdq(hw, rar, 0); + + return rar; +} + +/** + * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to disassociate + * @vmdq: VMDq pool index to remove from the rar + **/ +s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 mpsar_lo, mpsar_hi; + u32 rar_entries = hw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + + if (!mpsar_lo && !mpsar_hi) + goto done; + + if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { + if (mpsar_lo) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); + mpsar_lo = 0; + } + if (mpsar_hi) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); + mpsar_hi = 0; + } + } else if (vmdq < 32) { + mpsar_lo &= ~(1 << vmdq); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); + } else { + mpsar_hi &= ~(1 << (vmdq - 32)); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); + } + + /* was that the last pool using this rar? */ + if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) + hw->mac.ops.clear_rar(hw, rar); +done: + return 0; +} + +/** + * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq pool index + **/ +s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 mpsar; + u32 rar_entries = hw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + if (vmdq < 32) { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar |= 1 << vmdq; + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); + } else { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + mpsar |= 1 << (vmdq - 32); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); + } + return 0; +} + +/** + * This function should only be involved in the IOV mode. + * In IOV mode, Default pool is next pool after the number of + * VFs advertized and not 0. + * MPSAR table needs to be updated for SAN_MAC RAR [hw->mac.san_mac_rar_index] + * + * ixgbe_set_vmdq_san_mac - Associate default VMDq pool index with a rx address + * @hw: pointer to hardware struct + * @vmdq: VMDq pool index + **/ +s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq) +{ + u32 mpsar; + u32 rar = hw->mac.san_mac_rar_index; + + if (vmdq < 32) { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar |= 1 << vmdq; + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); + } else { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + mpsar |= 1 << (vmdq - 32); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); + } + + return 0; +} + +/** + * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array + * @hw: pointer to hardware structure + **/ +s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) +{ + int i; + + hw_dbg(hw, " Clearing UTA\n"); + + for (i = 0; i < 128; i++) + IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); + + return 0; +} + +/** + * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * + * return the VLVF index where this VLAN id should be placed + * + **/ +s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan) +{ + u32 bits = 0; + u32 first_empty_slot = 0; + s32 regindex; + + /* short cut the special case */ + if (vlan == 0) + return 0; + + /* + * Search for the vlan id in the VLVF entries. Save off the first empty + * slot found along the way + */ + for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { + bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); + if (!bits && !(first_empty_slot)) + first_empty_slot = regindex; + else if ((bits & 0x0FFF) == vlan) + break; + } + + /* + * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan + * in the VLVF. Else use the first empty VLVF register for this + * vlan id. + */ + if (regindex >= IXGBE_VLVF_ENTRIES) { + if (first_empty_slot) + regindex = first_empty_slot; + else { + hw_dbg(hw, "No space in VLVF.\n"); + regindex = IXGBE_ERR_NO_SPACE; + } + } + + return regindex; +} + +/** + * ixgbe_set_vfta_generic - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFVFB + * @vlan_on: boolean flag to turn on/off VLAN in VFVF + * + * Turn on/off specified VLAN in the VLAN filter table. + **/ +s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on) +{ + s32 regindex; + u32 bitindex; + u32 vfta; + u32 targetbit; + s32 ret_val = 0; + bool vfta_changed = false; + + if (vlan > 4095) + return IXGBE_ERR_PARAM; + + /* + * this is a 2 part operation - first the VFTA, then the + * VLVF and VLVFB if VT Mode is set + * We don't write the VFTA until we know the VLVF part succeeded. + */ + + /* Part 1 + * The VFTA is a bitstring made up of 128 32-bit registers + * that enable the particular VLAN id, much like the MTA: + * bits[11-5]: which register + * bits[4-0]: which bit in the register + */ + regindex = (vlan >> 5) & 0x7F; + bitindex = vlan & 0x1F; + targetbit = (1 << bitindex); + vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); + + if (vlan_on) { + if (!(vfta & targetbit)) { + vfta |= targetbit; + vfta_changed = true; + } + } else { + if (vfta & targetbit) { + vfta &= ~targetbit; + vfta_changed = true; + } + } + + /* Part 2 + * Call ixgbe_set_vlvf_generic to set VLVFB and VLVF + */ + ret_val = ixgbe_set_vlvf_generic(hw, vlan, vind, vlan_on, + &vfta_changed); + if (ret_val != 0) + return ret_val; + + if (vfta_changed) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta); + + return 0; +} + +/** + * ixgbe_set_vlvf_generic - Set VLAN Pool Filter + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFVFB + * @vlan_on: boolean flag to turn on/off VLAN in VFVF + * @vfta_changed: pointer to boolean flag which indicates whether VFTA + * should be changed + * + * Turn on/off specified bit in VLVF table. + **/ +s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on, bool *vfta_changed) +{ + u32 vt; + + if (vlan > 4095) + return IXGBE_ERR_PARAM; + + /* If VT Mode is set + * Either vlan_on + * make sure the vlan is in VLVF + * set the vind bit in the matching VLVFB + * Or !vlan_on + * clear the pool bit and possibly the vind + */ + vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL); + if (vt & IXGBE_VT_CTL_VT_ENABLE) { + s32 vlvf_index; + u32 bits; + + vlvf_index = ixgbe_find_vlvf_slot(hw, vlan); + if (vlvf_index < 0) + return vlvf_index; + + if (vlan_on) { + /* set the pool bit */ + if (vind < 32) { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(vlvf_index * 2)); + bits |= (1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB(vlvf_index * 2), + bits); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB((vlvf_index * 2) + 1)); + bits |= (1 << (vind - 32)); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB((vlvf_index * 2) + 1), + bits); + } + } else { + /* clear the pool bit */ + if (vind < 32) { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(vlvf_index * 2)); + bits &= ~(1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB(vlvf_index * 2), + bits); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB((vlvf_index * 2) + 1)); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB((vlvf_index * 2) + 1)); + bits &= ~(1 << (vind - 32)); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB((vlvf_index * 2) + 1), + bits); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB(vlvf_index * 2)); + } + } + + /* + * If there are still bits set in the VLVFB registers + * for the VLAN ID indicated we need to see if the + * caller is requesting that we clear the VFTA entry bit. + * If the caller has requested that we clear the VFTA + * entry bit but there are still pools/VFs using this VLAN + * ID entry then ignore the request. We're not worried + * about the case where we're turning the VFTA VLAN ID + * entry bit on, only when requested to turn it off as + * there may be multiple pools and/or VFs using the + * VLAN ID entry. In that case we cannot clear the + * VFTA bit until all pools/VFs using that VLAN ID have also + * been cleared. This will be indicated by "bits" being + * zero. + */ + if (bits) { + IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), + (IXGBE_VLVF_VIEN | vlan)); + if (!vlan_on && (vfta_changed != NULL)) { + /* someone wants to clear the vfta entry + * but some pools/VFs are still using it. + * Ignore it. */ + *vfta_changed = false; + } + } else + IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0); + } + + return 0; +} + +/** + * ixgbe_clear_vfta_generic - Clear VLAN filter table + * @hw: pointer to hardware structure + * + * Clears the VLAN filer table, and the VMDq index associated with the filter + **/ +s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) +{ + u32 offset; + + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); + + for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { + IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0); + } + + return 0; +} + +/** + * ixgbe_check_mac_link_generic - Determine link and speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true when link is up + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Reads the links register to determine if link is up and the current speed + **/ +s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete) +{ + u32 links_reg, links_orig; + u32 i; + + /* clear the old state */ + links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS); + + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + + if (links_orig != links_reg) { + hw_dbg(hw, "LINKS changed from %08X to %08X\n", + links_orig, links_reg); + } + + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if (links_reg & IXGBE_LINKS_UP) { + *link_up = true; + break; + } else { + *link_up = false; + } + msleep(100); + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + } + } else { + if (links_reg & IXGBE_LINKS_UP) + *link_up = true; + else + *link_up = false; + } + + if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_10G_82599) + *speed = IXGBE_LINK_SPEED_10GB_FULL; + else if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_1G_82599) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + else if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_100_82599) + *speed = IXGBE_LINK_SPEED_100_FULL; + else + *speed = IXGBE_LINK_SPEED_UNKNOWN; + + return 0; +} + +/** + * ixgbe_get_wwn_prefix_generic - Get alternative WWNN/WWPN prefix from + * the EEPROM + * @hw: pointer to hardware structure + * @wwnn_prefix: the alternative WWNN prefix + * @wwpn_prefix: the alternative WWPN prefix + * + * This function will read the EEPROM from the alternative SAN MAC address + * block to check the support for the alternative WWNN/WWPN prefix support. + **/ +s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, + u16 *wwpn_prefix) +{ + u16 offset, caps; + u16 alt_san_mac_blk_offset; + + /* clear output first */ + *wwnn_prefix = 0xFFFF; + *wwpn_prefix = 0xFFFF; + + /* check if alternative SAN MAC is supported */ + hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR, + &alt_san_mac_blk_offset); + + if ((alt_san_mac_blk_offset == 0) || + (alt_san_mac_blk_offset == 0xFFFF)) + goto wwn_prefix_out; + + /* check capability in alternative san mac address block */ + offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET; + hw->eeprom.ops.read(hw, offset, &caps); + if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN)) + goto wwn_prefix_out; + + /* get the corresponding prefix for WWNN/WWPN */ + offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET; + hw->eeprom.ops.read(hw, offset, wwnn_prefix); + + offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET; + hw->eeprom.ops.read(hw, offset, wwpn_prefix); + +wwn_prefix_out: + return 0; +} + +/** + * ixgbe_get_fcoe_boot_status_generic - Get FCOE boot status from EEPROM + * @hw: pointer to hardware structure + * @bs: the fcoe boot status + * + * This function will read the FCOE boot status from the iSCSI FCOE block + **/ +s32 ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw *hw, u16 *bs) +{ + u16 offset, caps, flags; + s32 status; + + /* clear output first */ + *bs = ixgbe_fcoe_bootstatus_unavailable; + + /* check if FCOE IBA block is present */ + offset = IXGBE_FCOE_IBA_CAPS_BLK_PTR; + status = hw->eeprom.ops.read(hw, offset, &caps); + if (status != 0) + goto out; + + if (!(caps & IXGBE_FCOE_IBA_CAPS_FCOE)) + goto out; + + /* check if iSCSI FCOE block is populated */ + status = hw->eeprom.ops.read(hw, IXGBE_ISCSI_FCOE_BLK_PTR, &offset); + if (status != 0) + goto out; + + if ((offset == 0) || (offset == 0xFFFF)) + goto out; + + /* read fcoe flags in iSCSI FCOE block */ + offset = offset + IXGBE_ISCSI_FCOE_FLAGS_OFFSET; + status = hw->eeprom.ops.read(hw, offset, &flags); + if (status != 0) + goto out; + + if (flags & IXGBE_ISCSI_FCOE_FLAGS_ENABLE) + *bs = ixgbe_fcoe_bootstatus_enabled; + else + *bs = ixgbe_fcoe_bootstatus_disabled; + +out: + return status; +} + +/** + * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing + * @hw: pointer to hardware structure + * @enable: enable or disable switch for anti-spoofing + * @pf: Physical Function pool - do not enable anti-spoofing for the PF + * + **/ +void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf) +{ + int j; + int pf_target_reg = pf >> 3; + int pf_target_shift = pf % 8; + u32 pfvfspoof = 0; + + if (hw->mac.type == ixgbe_mac_82598EB) + return; + + if (enable) + pfvfspoof = IXGBE_SPOOF_MACAS_MASK; + + /* + * PFVFSPOOF register array is size 8 with 8 bits assigned to + * MAC anti-spoof enables in each register array element. + */ + for (j = 0; j < IXGBE_PFVFSPOOF_REG_COUNT; j++) + IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof); + + /* If not enabling anti-spoofing then done */ + if (!enable) + return; + + /* + * The PF should be allowed to spoof so that it can support + * emulation mode NICs. Reset the bit assigned to the PF + */ + pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg)); + pfvfspoof ^= (1 << pf_target_shift); + IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg), pfvfspoof); +} + +/** + * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing + * @hw: pointer to hardware structure + * @enable: enable or disable switch for VLAN anti-spoofing + * @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing + * + **/ +void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) +{ + int vf_target_reg = vf >> 3; + int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT; + u32 pfvfspoof; + + if (hw->mac.type == ixgbe_mac_82598EB) + return; + + pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg)); + if (enable) + pfvfspoof |= (1 << vf_target_shift); + else + pfvfspoof &= ~(1 << vf_target_shift); + IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof); +} + +/** + * ixgbe_get_device_caps_generic - Get additional device capabilities + * @hw: pointer to hardware structure + * @device_caps: the EEPROM word with the extra device capabilities + * + * This function will read the EEPROM location for the device capabilities, + * and return the word through device_caps. + **/ +s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps) +{ + hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps); + + return 0; +} + +/** + * ixgbe_calculate_checksum - Calculate checksum for buffer + * @buffer: pointer to EEPROM + * @length: size of EEPROM to calculate a checksum for + * Calculates the checksum for some buffer on a specified length. The + * checksum calculated is returned. + **/ +static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) +{ + u32 i; + u8 sum = 0; + + if (!buffer) + return 0; + for (i = 0; i < length; i++) + sum += buffer[i]; + + return (u8) (0 - sum); +} + +/** + * ixgbe_host_interface_command - Issue command to manageability block + * @hw: pointer to the HW structure + * @buffer: contains the command to write and where the return status will + * be placed + * @length: length of buffer, must be multiple of 4 bytes + * + * Communicates with the manageability block. On success return 0 + * else return IXGBE_ERR_HOST_INTERFACE_COMMAND. + **/ +static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, + u32 length) +{ + u32 hicr, i, bi; + u32 hdr_size = sizeof(struct ixgbe_hic_hdr); + u8 buf_len, dword_len; + + s32 ret_val = 0; + + if (length == 0 || length & 0x3 || + length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) { + hw_dbg(hw, "Buffer length failure.\n"); + ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; + goto out; + } + + /* Check that the host interface is enabled. */ + hicr = IXGBE_READ_REG(hw, IXGBE_HICR); + if ((hicr & IXGBE_HICR_EN) == 0) { + hw_dbg(hw, "IXGBE_HOST_EN bit disabled.\n"); + ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; + goto out; + } + + /* Calculate length in DWORDs */ + dword_len = length >> 2; + + /* + * The device driver writes the relevant command block + * into the ram area. + */ + for (i = 0; i < dword_len; i++) + IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG, + i, IXGBE_CPU_TO_LE32(buffer[i])); + + /* Setting this bit tells the ARC that a new command is pending. */ + IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C); + + for (i = 0; i < IXGBE_HI_COMMAND_TIMEOUT; i++) { + hicr = IXGBE_READ_REG(hw, IXGBE_HICR); + if (!(hicr & IXGBE_HICR_C)) + break; + msleep(1); + } + + /* Check command successful completion. */ + if (i == IXGBE_HI_COMMAND_TIMEOUT || + (!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) { + hw_dbg(hw, "Command has failed with no status valid.\n"); + ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; + goto out; + } + + /* Calculate length in DWORDs */ + dword_len = hdr_size >> 2; + + /* first pull in the header so we know the buffer length */ + for (bi = 0; bi < dword_len; bi++) { + buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi); + IXGBE_LE32_TO_CPUS(&buffer[bi]); + } + + /* If there is any thing in data position pull it in */ + buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len; + if (buf_len == 0) + goto out; + + if (length < (buf_len + hdr_size)) { + hw_dbg(hw, "Buffer not large enough for reply message.\n"); + ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; + goto out; + } + + /* Calculate length in DWORDs, add 3 for odd lengths */ + dword_len = (buf_len + 3) >> 2; + + /* Pull in the rest of the buffer (bi is where we left off)*/ + for (; bi <= dword_len; bi++) { + buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi); + IXGBE_LE32_TO_CPUS(&buffer[bi]); + } + +out: + return ret_val; +} + +/** + * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware + * @hw: pointer to the HW structure + * @maj: driver version major number + * @min: driver version minor number + * @build: driver version build number + * @sub: driver version sub build number + * + * Sends driver version number to firmware through the manageability + * block. On success return 0 + * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring + * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. + **/ +s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, + u8 build, u8 sub) +{ + struct ixgbe_hic_drv_info fw_cmd; + int i; + s32 ret_val = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM) + != 0) { + ret_val = IXGBE_ERR_SWFW_SYNC; + goto out; + } + + fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; + fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN; + fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; + fw_cmd.port_num = (u8)hw->bus.func; + fw_cmd.ver_maj = maj; + fw_cmd.ver_min = min; + fw_cmd.ver_build = build; + fw_cmd.ver_sub = sub; + fw_cmd.hdr.checksum = 0; + fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd, + (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len)); + fw_cmd.pad = 0; + fw_cmd.pad2 = 0; + + for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { + ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, + sizeof(fw_cmd)); + if (ret_val != 0) + continue; + + if (fw_cmd.hdr.cmd_or_resp.ret_status == + FW_CEM_RESP_STATUS_SUCCESS) + ret_val = 0; + else + ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; + + break; + } + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM); +out: + return ret_val; +} + +/** + * ixgbe_set_rxpba_generic - Initialize Rx packet buffer + * @hw: pointer to hardware structure + * @num_pb: number of packet buffers to allocate + * @headroom: reserve n KB of headroom + * @strategy: packet buffer allocation strategy + **/ +void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb, u32 headroom, + int strategy) +{ + u32 pbsize = hw->mac.rx_pb_size; + int i = 0; + u32 rxpktsize, txpktsize, txpbthresh; + + /* Reserve headroom */ + pbsize -= headroom; + + if (!num_pb) + num_pb = 1; + + /* Divide remaining packet buffer space amongst the number of packet + * buffers requested using supplied strategy. + */ + switch (strategy) { + case PBA_STRATEGY_WEIGHTED: + /* ixgbe_dcb_pba_80_48 strategy weight first half of packet + * buffer with 5/8 of the packet buffer space. + */ + rxpktsize = (pbsize * 5) / (num_pb * 4); + pbsize -= rxpktsize * (num_pb / 2); + rxpktsize <<= IXGBE_RXPBSIZE_SHIFT; + for (; i < (num_pb / 2); i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); + /* Fall through to configure remaining packet buffers */ + case PBA_STRATEGY_EQUAL: + rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT; + for (; i < num_pb; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); + break; + default: + break; + } + + /* Only support an equally distributed Tx packet buffer strategy. */ + txpktsize = IXGBE_TXPBSIZE_MAX / num_pb; + txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX; + for (i = 0; i < num_pb; i++) { + IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize); + IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh); + } + + /* Clear unused TCs, if any, to zero buffer size*/ + for (; i < IXGBE_MAX_PB; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0); + } +} + +/** + * ixgbe_clear_tx_pending - Clear pending TX work from the PCIe fifo + * @hw: pointer to the hardware structure + * + * The 82599 and x540 MACs can experience issues if TX work is still pending + * when a reset occurs. This function prevents this by flushing the PCIe + * buffers on the system. + **/ +void ixgbe_clear_tx_pending(struct ixgbe_hw *hw) +{ + u32 gcr_ext, hlreg0; + + /* + * If double reset is not requested then all transactions should + * already be clear and as such there is no work to do + */ + if (!(hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED)) + return; + + /* + * Set loopback enable to prevent any transmits from being sent + * should the link come up. This assumes that the RXCTRL.RXEN bit + * has already been cleared. + */ + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0 | IXGBE_HLREG0_LPBK); + + /* initiate cleaning flow for buffers in the PCIe transaction layer */ + gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT); + IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, + gcr_ext | IXGBE_GCR_EXT_BUFFERS_CLEAR); + + /* Flush all writes and allow 20usec for all transactions to clear */ + IXGBE_WRITE_FLUSH(hw); + udelay(20); + + /* restore previous register values */ + IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext); + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); +} + +static const u8 ixgbe_emc_temp_data[4] = { + IXGBE_EMC_INTERNAL_DATA, + IXGBE_EMC_DIODE1_DATA, + IXGBE_EMC_DIODE2_DATA, + IXGBE_EMC_DIODE3_DATA +}; +static const u8 ixgbe_emc_therm_limit[4] = { + IXGBE_EMC_INTERNAL_THERM_LIMIT, + IXGBE_EMC_DIODE1_THERM_LIMIT, + IXGBE_EMC_DIODE2_THERM_LIMIT, + IXGBE_EMC_DIODE3_THERM_LIMIT +}; + +/** + * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data + * @hw: pointer to hardware structure + * @data: pointer to the thermal sensor data structure + * + * Returns the thermal sensor data structure + **/ +s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw) +{ + s32 status = 0; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 i; + struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + /* Only support thermal sensors attached to 82599 physical port 0 */ + if ((hw->mac.type != ixgbe_mac_82599EB) || + (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) { + status = IXGBE_NOT_IMPLEMENTED; + goto out; + } + + status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, &ets_offset); + if (status) + goto out; + + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) { + status = IXGBE_NOT_IMPLEMENTED; + goto out; + } + + status = hw->eeprom.ops.read(hw, ets_offset, &ets_cfg); + if (status) + goto out; + + if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT) + != IXGBE_ETS_TYPE_EMC) { + status = IXGBE_NOT_IMPLEMENTED; + goto out; + } + + num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK); + if (num_sensors > IXGBE_MAX_SENSORS) + num_sensors = IXGBE_MAX_SENSORS; + + for (i = 0; i < num_sensors; i++) { + status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i), + &ets_sensor); + if (status) + goto out; + + sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >> + IXGBE_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >> + IXGBE_ETS_DATA_LOC_SHIFT); + + if (sensor_location != 0) { + status = hw->phy.ops.read_i2c_byte(hw, + ixgbe_emc_temp_data[sensor_index], + IXGBE_I2C_THERMAL_SENSOR_ADDR, + &data->sensor[i].temp); + if (status) + goto out; + } + } +out: + return status; +} + +/** + * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds + * @hw: pointer to hardware structure + * + * Inits the thermal sensor thresholds according to the NVM map + * and save off the threshold and location values into mac.thermal_sensor_data + **/ +s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw) +{ + s32 status = 0; + u16 ets_offset; + u16 ets_cfg; + u16 ets_sensor; + u8 low_thresh_delta; + u8 num_sensors; + u8 sensor_index; + u8 sensor_location; + u8 therm_limit; + u8 i; + struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; + + memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data)); + + /* Only support thermal sensors attached to 82599 physical port 0 */ + if ((hw->mac.type != ixgbe_mac_82599EB) || + (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) + return IXGBE_NOT_IMPLEMENTED; + + hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, &ets_offset); + if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) + return IXGBE_NOT_IMPLEMENTED; + + hw->eeprom.ops.read(hw, ets_offset, &ets_cfg); + if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT) + != IXGBE_ETS_TYPE_EMC) + return IXGBE_NOT_IMPLEMENTED; + + low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >> + IXGBE_ETS_LTHRES_DELTA_SHIFT); + num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK); + + for (i = 0; i < num_sensors; i++) { + hw->eeprom.ops.read(hw, (ets_offset + 1 + i), &ets_sensor); + sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >> + IXGBE_ETS_DATA_INDEX_SHIFT); + sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >> + IXGBE_ETS_DATA_LOC_SHIFT); + therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK; + + hw->phy.ops.write_i2c_byte(hw, + ixgbe_emc_therm_limit[sensor_index], + IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit); + + if ((i < IXGBE_MAX_SENSORS) && (sensor_location != 0)) { + data->sensor[i].location = sensor_location; + data->sensor[i].caution_thresh = therm_limit; + data->sensor[i].max_op_thresh = therm_limit - + low_thresh_delta; + } + } + return status; +} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_common.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_common.h new file mode 100644 index 00000000..2989a80b --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_common.h @@ -0,0 +1,125 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_COMMON_H_ +#define _IXGBE_COMMON_H_ + +#include "ixgbe_type.h" + +u16 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw); + +s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw); +s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw); +s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw); +s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw); +s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw); +s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, + u32 pba_num_size); +s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr); +s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw); +void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw); +s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw); + +s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index); + +s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw); +s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data); +s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data); +s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data); +s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 *data); +s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw); +s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, + u16 *checksum_val); +s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw); +s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg); + +s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, + u32 enable_addr); +s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw); +s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count, + ixgbe_mc_addr_itr func, bool clear); +s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list, + u32 addr_count, ixgbe_mc_addr_itr func); +s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw); +s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw); +s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval); +s32 ixgbe_disable_sec_rx_path_generic(struct ixgbe_hw *hw); +s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw); + +s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw); +void ixgbe_fc_autoneg(struct ixgbe_hw *hw); + +s32 ixgbe_validate_mac_addr(u8 *mac_addr); +s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask); +void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask); +s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw); + +s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index); + +s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr); +s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr); + +s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_set_vmdq_san_mac_generic(struct ixgbe_hw *hw, u32 vmdq); +s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_insert_mac_addr_generic(struct ixgbe_hw *hw, u8 *addr, u32 vmdq); +s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw); +s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, + u32 vind, bool vlan_on); +s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on, bool *vfta_changed); +s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw); +s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan); + +s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete); + +s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, + u16 *wwpn_prefix); + +s32 ixgbe_get_fcoe_boot_status_generic(struct ixgbe_hw *hw, u16 *bs); +void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf); +void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf); +s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps); +void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb, u32 headroom, + int strategy); +s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, + u8 build, u8 ver); +void ixgbe_clear_tx_pending(struct ixgbe_hw *hw); + +#define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8 +#define IXGBE_EMC_INTERNAL_DATA 0x00 +#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20 +#define IXGBE_EMC_DIODE1_DATA 0x01 +#define IXGBE_EMC_DIODE1_THERM_LIMIT 0x19 +#define IXGBE_EMC_DIODE2_DATA 0x23 +#define IXGBE_EMC_DIODE2_THERM_LIMIT 0x1A +#define IXGBE_EMC_DIODE3_DATA 0x2A +#define IXGBE_EMC_DIODE3_THERM_LIMIT 0x30 + +s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw); +s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw); +#endif /* IXGBE_COMMON */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_dcb.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_dcb.h new file mode 100644 index 00000000..e9a099d5 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_dcb.h @@ -0,0 +1,153 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_DCB_H_ +#define _IXGBE_DCB_H_ + + +#include "ixgbe_type.h" + +/* DCB defines */ +/* DCB credit calculation defines */ +#define IXGBE_DCB_CREDIT_QUANTUM 64 +#define IXGBE_DCB_MAX_CREDIT_REFILL 200 /* 200 * 64B = 12800B */ +#define IXGBE_DCB_MAX_TSO_SIZE (32 * 1024) /* Max TSO pkt size in DCB*/ +#define IXGBE_DCB_MAX_CREDIT (2 * IXGBE_DCB_MAX_CREDIT_REFILL) + +/* 513 for 32KB TSO packet */ +#define IXGBE_DCB_MIN_TSO_CREDIT \ + ((IXGBE_DCB_MAX_TSO_SIZE / IXGBE_DCB_CREDIT_QUANTUM) + 1) + +/* DCB configuration defines */ +#define IXGBE_DCB_MAX_USER_PRIORITY 8 +#define IXGBE_DCB_MAX_BW_GROUP 8 +#define IXGBE_DCB_BW_PERCENT 100 + +#define IXGBE_DCB_TX_CONFIG 0 +#define IXGBE_DCB_RX_CONFIG 1 + +/* DCB capability defines */ +#define IXGBE_DCB_PG_SUPPORT 0x00000001 +#define IXGBE_DCB_PFC_SUPPORT 0x00000002 +#define IXGBE_DCB_BCN_SUPPORT 0x00000004 +#define IXGBE_DCB_UP2TC_SUPPORT 0x00000008 +#define IXGBE_DCB_GSP_SUPPORT 0x00000010 + +struct ixgbe_dcb_support { + u32 capabilities; /* DCB capabilities */ + + /* Each bit represents a number of TCs configurable in the hw. + * If 8 traffic classes can be configured, the value is 0x80. */ + u8 traffic_classes; + u8 pfc_traffic_classes; +}; + +enum ixgbe_dcb_tsa { + ixgbe_dcb_tsa_ets = 0, + ixgbe_dcb_tsa_group_strict_cee, + ixgbe_dcb_tsa_strict +}; + +/* Traffic class bandwidth allocation per direction */ +struct ixgbe_dcb_tc_path { + u8 bwg_id; /* Bandwidth Group (BWG) ID */ + u8 bwg_percent; /* % of BWG's bandwidth */ + u8 link_percent; /* % of link bandwidth */ + u8 up_to_tc_bitmap; /* User Priority to Traffic Class mapping */ + u16 data_credits_refill; /* Credit refill amount in 64B granularity */ + u16 data_credits_max; /* Max credits for a configured packet buffer + * in 64B granularity.*/ + enum ixgbe_dcb_tsa tsa; /* Link or Group Strict Priority */ +}; + +enum ixgbe_dcb_pfc { + ixgbe_dcb_pfc_disabled = 0, + ixgbe_dcb_pfc_enabled, + ixgbe_dcb_pfc_enabled_txonly, + ixgbe_dcb_pfc_enabled_rxonly +}; + +/* Traffic class configuration */ +struct ixgbe_dcb_tc_config { + struct ixgbe_dcb_tc_path path[2]; /* One each for Tx/Rx */ + enum ixgbe_dcb_pfc pfc; /* Class based flow control setting */ + + u16 desc_credits_max; /* For Tx Descriptor arbitration */ + u8 tc; /* Traffic class (TC) */ +}; + +enum ixgbe_dcb_pba { + /* PBA[0-7] each use 64KB FIFO */ + ixgbe_dcb_pba_equal = PBA_STRATEGY_EQUAL, + /* PBA[0-3] each use 80KB, PBA[4-7] each use 48KB */ + ixgbe_dcb_pba_80_48 = PBA_STRATEGY_WEIGHTED +}; + +struct ixgbe_dcb_num_tcs { + u8 pg_tcs; + u8 pfc_tcs; +}; + +struct ixgbe_dcb_config { + struct ixgbe_dcb_tc_config tc_config[IXGBE_DCB_MAX_TRAFFIC_CLASS]; + struct ixgbe_dcb_support support; + struct ixgbe_dcb_num_tcs num_tcs; + u8 bw_percentage[2][IXGBE_DCB_MAX_BW_GROUP]; /* One each for Tx/Rx */ + bool pfc_mode_enable; + bool round_robin_enable; + + enum ixgbe_dcb_pba rx_pba_cfg; + + u32 dcb_cfg_version; /* Not used...OS-specific? */ + u32 link_speed; /* For bandwidth allocation validation purpose */ + bool vt_mode; +}; + +/* DCB driver APIs */ + +/* DCB rule checking */ +s32 ixgbe_dcb_check_config_cee(struct ixgbe_dcb_config *); + +/* DCB credits calculation */ +s32 ixgbe_dcb_calculate_tc_credits(u8 *, u16 *, u16 *, int); +s32 ixgbe_dcb_calculate_tc_credits_cee(struct ixgbe_hw *, + struct ixgbe_dcb_config *, u32, u8); + +/* DCB PFC */ +s32 ixgbe_dcb_config_pfc(struct ixgbe_hw *, u8, u8 *); +s32 ixgbe_dcb_config_pfc_cee(struct ixgbe_hw *, struct ixgbe_dcb_config *); + +/* DCB stats */ +s32 ixgbe_dcb_config_tc_stats(struct ixgbe_hw *); +s32 ixgbe_dcb_get_tc_stats(struct ixgbe_hw *, struct ixgbe_hw_stats *, u8); +s32 ixgbe_dcb_get_pfc_stats(struct ixgbe_hw *, struct ixgbe_hw_stats *, u8); + +/* DCB config arbiters */ +s32 ixgbe_dcb_config_tx_desc_arbiter_cee(struct ixgbe_hw *, + struct ixgbe_dcb_config *); +s32 ixgbe_dcb_config_tx_data_arbiter_cee(struct ixgbe_hw *, + struct ixgbe_dcb_config *); +s32 ixgbe_dcb_config_rx_arbiter_cee(struct ixgbe_hw *, + struct ixgbe_dcb_config *); + +/* DCB unpack routines */ +void ixgbe_dcb_unpack_pfc_cee(struct ixgbe_dcb_config *, u8 *, u8 *); +void ixgbe_dcb_unpack_refill_cee(struct ixgbe_dcb_config *, int, u16 *); +void ixgbe_dcb_unpack_max_cee(struct ixgbe_dcb_config *, u16 *); +void ixgbe_dcb_unpack_bwgid_cee(struct ixgbe_dcb_config *, int, u8 *); +void ixgbe_dcb_unpack_tsa_cee(struct ixgbe_dcb_config *, int, u8 *); +void ixgbe_dcb_unpack_map_cee(struct ixgbe_dcb_config *, int, u8 *); + +/* DCB initialization */ +s32 ixgbe_dcb_hw_config(struct ixgbe_hw *, u16 *, u16 *, u8 *, u8 *, u8 *); +s32 ixgbe_dcb_hw_config_cee(struct ixgbe_hw *, struct ixgbe_dcb_config *); +#endif /* _IXGBE_DCB_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_ethtool.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_ethtool.c new file mode 100644 index 00000000..44cdc9f2 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_ethtool.c @@ -0,0 +1,2886 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ethtool support for ixgbe */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/vmalloc.h> +#include <linux/highmem.h> +#ifdef SIOCETHTOOL +#include <asm/uaccess.h> + +#include "ixgbe.h" + +#ifndef ETH_GSTRING_LEN +#define ETH_GSTRING_LEN 32 +#endif + +#define IXGBE_ALL_RAR_ENTRIES 16 + +#ifdef ETHTOOL_OPS_COMPAT +#include "kcompat_ethtool.c" +#endif +#ifdef ETHTOOL_GSTATS +struct ixgbe_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define IXGBE_NETDEV_STAT(_net_stat) { \ + .stat_string = #_net_stat, \ + .sizeof_stat = FIELD_SIZEOF(struct net_device_stats, _net_stat), \ + .stat_offset = offsetof(struct net_device_stats, _net_stat) \ +} +static const struct ixgbe_stats ixgbe_gstrings_net_stats[] = { + IXGBE_NETDEV_STAT(rx_packets), + IXGBE_NETDEV_STAT(tx_packets), + IXGBE_NETDEV_STAT(rx_bytes), + IXGBE_NETDEV_STAT(tx_bytes), + IXGBE_NETDEV_STAT(rx_errors), + IXGBE_NETDEV_STAT(tx_errors), + IXGBE_NETDEV_STAT(rx_dropped), + IXGBE_NETDEV_STAT(tx_dropped), + IXGBE_NETDEV_STAT(multicast), + IXGBE_NETDEV_STAT(collisions), + IXGBE_NETDEV_STAT(rx_over_errors), + IXGBE_NETDEV_STAT(rx_crc_errors), + IXGBE_NETDEV_STAT(rx_frame_errors), + IXGBE_NETDEV_STAT(rx_fifo_errors), + IXGBE_NETDEV_STAT(rx_missed_errors), + IXGBE_NETDEV_STAT(tx_aborted_errors), + IXGBE_NETDEV_STAT(tx_carrier_errors), + IXGBE_NETDEV_STAT(tx_fifo_errors), + IXGBE_NETDEV_STAT(tx_heartbeat_errors), +}; + +#define IXGBE_STAT(_name, _stat) { \ + .stat_string = _name, \ + .sizeof_stat = FIELD_SIZEOF(struct ixgbe_adapter, _stat), \ + .stat_offset = offsetof(struct ixgbe_adapter, _stat) \ +} +static struct ixgbe_stats ixgbe_gstrings_stats[] = { + IXGBE_STAT("rx_pkts_nic", stats.gprc), + IXGBE_STAT("tx_pkts_nic", stats.gptc), + IXGBE_STAT("rx_bytes_nic", stats.gorc), + IXGBE_STAT("tx_bytes_nic", stats.gotc), + IXGBE_STAT("lsc_int", lsc_int), + IXGBE_STAT("tx_busy", tx_busy), + IXGBE_STAT("non_eop_descs", non_eop_descs), +#ifndef CONFIG_IXGBE_NAPI + IXGBE_STAT("rx_dropped_backlog", rx_dropped_backlog), +#endif + IXGBE_STAT("broadcast", stats.bprc), + IXGBE_STAT("rx_no_buffer_count", stats.rnbc[0]) , + IXGBE_STAT("tx_timeout_count", tx_timeout_count), + IXGBE_STAT("tx_restart_queue", restart_queue), + IXGBE_STAT("rx_long_length_errors", stats.roc), + IXGBE_STAT("rx_short_length_errors", stats.ruc), + IXGBE_STAT("tx_flow_control_xon", stats.lxontxc), + IXGBE_STAT("rx_flow_control_xon", stats.lxonrxc), + IXGBE_STAT("tx_flow_control_xoff", stats.lxofftxc), + IXGBE_STAT("rx_flow_control_xoff", stats.lxoffrxc), + IXGBE_STAT("rx_csum_offload_errors", hw_csum_rx_error), + IXGBE_STAT("alloc_rx_page_failed", alloc_rx_page_failed), + IXGBE_STAT("alloc_rx_buff_failed", alloc_rx_buff_failed), +#ifndef IXGBE_NO_LRO + IXGBE_STAT("lro_aggregated", lro_stats.coal), + IXGBE_STAT("lro_flushed", lro_stats.flushed), +#endif /* IXGBE_NO_LRO */ + IXGBE_STAT("rx_no_dma_resources", hw_rx_no_dma_resources), + IXGBE_STAT("hw_rsc_aggregated", rsc_total_count), + IXGBE_STAT("hw_rsc_flushed", rsc_total_flush), +#ifdef HAVE_TX_MQ + IXGBE_STAT("fdir_match", stats.fdirmatch), + IXGBE_STAT("fdir_miss", stats.fdirmiss), + IXGBE_STAT("fdir_overflow", fdir_overflow), +#endif /* HAVE_TX_MQ */ +#ifdef IXGBE_FCOE + IXGBE_STAT("fcoe_bad_fccrc", stats.fccrc), + IXGBE_STAT("fcoe_last_errors", stats.fclast), + IXGBE_STAT("rx_fcoe_dropped", stats.fcoerpdc), + IXGBE_STAT("rx_fcoe_packets", stats.fcoeprc), + IXGBE_STAT("rx_fcoe_dwords", stats.fcoedwrc), + IXGBE_STAT("fcoe_noddp", stats.fcoe_noddp), + IXGBE_STAT("fcoe_noddp_ext_buff", stats.fcoe_noddp_ext_buff), + IXGBE_STAT("tx_fcoe_packets", stats.fcoeptc), + IXGBE_STAT("tx_fcoe_dwords", stats.fcoedwtc), +#endif /* IXGBE_FCOE */ + IXGBE_STAT("os2bmc_rx_by_bmc", stats.o2bgptc), + IXGBE_STAT("os2bmc_tx_by_bmc", stats.b2ospc), + IXGBE_STAT("os2bmc_tx_by_host", stats.o2bspc), + IXGBE_STAT("os2bmc_rx_by_host", stats.b2ogprc), +}; + +#define IXGBE_QUEUE_STATS_LEN \ + ((((struct ixgbe_adapter *)netdev_priv(netdev))->num_tx_queues + \ + ((struct ixgbe_adapter *)netdev_priv(netdev))->num_rx_queues) * \ + (sizeof(struct ixgbe_queue_stats) / sizeof(u64))) +#define IXGBE_GLOBAL_STATS_LEN ARRAY_SIZE(ixgbe_gstrings_stats) +#define IXGBE_NETDEV_STATS_LEN ARRAY_SIZE(ixgbe_gstrings_net_stats) +#define IXGBE_PB_STATS_LEN ( \ + (((struct ixgbe_adapter *)netdev_priv(netdev))->flags & \ + IXGBE_FLAG_DCB_ENABLED) ? \ + (sizeof(((struct ixgbe_adapter *)0)->stats.pxonrxc) + \ + sizeof(((struct ixgbe_adapter *)0)->stats.pxontxc) + \ + sizeof(((struct ixgbe_adapter *)0)->stats.pxoffrxc) + \ + sizeof(((struct ixgbe_adapter *)0)->stats.pxofftxc)) \ + / sizeof(u64) : 0) +#define IXGBE_VF_STATS_LEN \ + ((((struct ixgbe_adapter *)netdev_priv(netdev))->num_vfs) * \ + (sizeof(struct vf_stats) / sizeof(u64))) +#define IXGBE_STATS_LEN (IXGBE_GLOBAL_STATS_LEN + \ + IXGBE_NETDEV_STATS_LEN + \ + IXGBE_PB_STATS_LEN + \ + IXGBE_QUEUE_STATS_LEN + \ + IXGBE_VF_STATS_LEN) + +#endif /* ETHTOOL_GSTATS */ +#ifdef ETHTOOL_TEST +static const char ixgbe_gstrings_test[][ETH_GSTRING_LEN] = { + "Register test (offline)", "Eeprom test (offline)", + "Interrupt test (offline)", "Loopback test (offline)", + "Link test (on/offline)" +}; +#define IXGBE_TEST_LEN (sizeof(ixgbe_gstrings_test) / ETH_GSTRING_LEN) +#endif /* ETHTOOL_TEST */ + +int ixgbe_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 link_speed = 0; + bool link_up; + + ecmd->supported = SUPPORTED_10000baseT_Full; + ecmd->autoneg = AUTONEG_ENABLE; + ecmd->transceiver = XCVR_EXTERNAL; + if ((hw->phy.media_type == ixgbe_media_type_copper) || + (hw->phy.multispeed_fiber)) { + ecmd->supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg); + switch (hw->mac.type) { + case ixgbe_mac_X540: + ecmd->supported |= SUPPORTED_100baseT_Full; + break; + default: + break; + } + + ecmd->advertising = ADVERTISED_Autoneg; + if (hw->phy.autoneg_advertised) { + if (hw->phy.autoneg_advertised & + IXGBE_LINK_SPEED_100_FULL) + ecmd->advertising |= ADVERTISED_100baseT_Full; + if (hw->phy.autoneg_advertised & + IXGBE_LINK_SPEED_10GB_FULL) + ecmd->advertising |= ADVERTISED_10000baseT_Full; + if (hw->phy.autoneg_advertised & + IXGBE_LINK_SPEED_1GB_FULL) + ecmd->advertising |= ADVERTISED_1000baseT_Full; + } else { + /* + * Default advertised modes in case + * phy.autoneg_advertised isn't set. + */ + ecmd->advertising |= (ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full); + if (hw->mac.type == ixgbe_mac_X540) + ecmd->advertising |= ADVERTISED_100baseT_Full; + } + + if (hw->phy.media_type == ixgbe_media_type_copper) { + ecmd->supported |= SUPPORTED_TP; + ecmd->advertising |= ADVERTISED_TP; + ecmd->port = PORT_TP; + } else { + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; + ecmd->port = PORT_FIBRE; + } + } else if (hw->phy.media_type == ixgbe_media_type_backplane) { + /* Set as FIBRE until SERDES defined in kernel */ + if (hw->device_id == IXGBE_DEV_ID_82598_BX) { + ecmd->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; + ecmd->autoneg = AUTONEG_DISABLE; + } else if ((hw->device_id == IXGBE_DEV_ID_82599_COMBO_BACKPLANE) + || (hw->device_id == IXGBE_DEV_ID_82599_KX4_MEZZ)) { + ecmd->supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_Autoneg | + ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; + } else { + ecmd->supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; + } + } else { + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising = (ADVERTISED_10000baseT_Full | + ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; + ecmd->autoneg = AUTONEG_DISABLE; + } + +#ifdef HAVE_ETHTOOL_SFP_DISPLAY_PORT + /* Get PHY type */ + switch (adapter->hw.phy.type) { + case ixgbe_phy_tn: + case ixgbe_phy_aq: + case ixgbe_phy_cu_unknown: + /* Copper 10G-BASET */ + ecmd->port = PORT_TP; + break; + case ixgbe_phy_qt: + ecmd->port = PORT_FIBRE; + break; + case ixgbe_phy_nl: + case ixgbe_phy_sfp_passive_tyco: + case ixgbe_phy_sfp_passive_unknown: + case ixgbe_phy_sfp_ftl: + case ixgbe_phy_sfp_avago: + case ixgbe_phy_sfp_intel: + case ixgbe_phy_sfp_unknown: + switch (adapter->hw.phy.sfp_type) { + /* SFP+ devices, further checking needed */ + case ixgbe_sfp_type_da_cu: + case ixgbe_sfp_type_da_cu_core0: + case ixgbe_sfp_type_da_cu_core1: + ecmd->port = PORT_DA; + break; + case ixgbe_sfp_type_sr: + case ixgbe_sfp_type_lr: + case ixgbe_sfp_type_srlr_core0: + case ixgbe_sfp_type_srlr_core1: + ecmd->port = PORT_FIBRE; + break; + case ixgbe_sfp_type_not_present: + ecmd->port = PORT_NONE; + break; + case ixgbe_sfp_type_1g_cu_core0: + case ixgbe_sfp_type_1g_cu_core1: + ecmd->port = PORT_TP; + ecmd->supported = SUPPORTED_TP; + ecmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_TP); + break; + case ixgbe_sfp_type_1g_sx_core0: + case ixgbe_sfp_type_1g_sx_core1: + ecmd->port = PORT_FIBRE; + ecmd->supported = SUPPORTED_FIBRE; + ecmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE); + break; + case ixgbe_sfp_type_unknown: + default: + ecmd->port = PORT_OTHER; + break; + } + break; + case ixgbe_phy_xaui: + ecmd->port = PORT_NONE; + break; + case ixgbe_phy_unknown: + case ixgbe_phy_generic: + case ixgbe_phy_sfp_unsupported: + default: + ecmd->port = PORT_OTHER; + break; + } +#endif + + if (!in_interrupt()) { + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + } else { + /* + * this case is a special workaround for RHEL5 bonding + * that calls this routine from interrupt context + */ + link_speed = adapter->link_speed; + link_up = adapter->link_up; + } + + if (link_up) { + switch (link_speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + ecmd->speed = SPEED_10000; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + ecmd->speed = SPEED_1000; + break; + case IXGBE_LINK_SPEED_100_FULL: + ecmd->speed = SPEED_100; + break; + default: + break; + } + ecmd->duplex = DUPLEX_FULL; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + return 0; +} + +static int ixgbe_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 advertised, old; + s32 err = 0; + + if ((hw->phy.media_type == ixgbe_media_type_copper) || + (hw->phy.multispeed_fiber)) { + /* + * this function does not support duplex forcing, but can + * limit the advertising of the adapter to the specified speed + */ + if (ecmd->autoneg == AUTONEG_DISABLE) + return -EINVAL; + + if (ecmd->advertising & ~ecmd->supported) + return -EINVAL; + + old = hw->phy.autoneg_advertised; + advertised = 0; + if (ecmd->advertising & ADVERTISED_10000baseT_Full) + advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (ecmd->advertising & ADVERTISED_1000baseT_Full) + advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + if (ecmd->advertising & ADVERTISED_100baseT_Full) + advertised |= IXGBE_LINK_SPEED_100_FULL; + + if (old == advertised) + return err; + /* this sets the link speed and restarts auto-neg */ + hw->mac.autotry_restart = true; + err = hw->mac.ops.setup_link(hw, advertised, true, true); + if (err) { + e_info(probe, "setup link failed with code %d\n", err); + hw->mac.ops.setup_link(hw, old, true, true); + } + } + return err; +} + +static void ixgbe_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + if (hw->fc.disable_fc_autoneg) + pause->autoneg = 0; + else + pause->autoneg = 1; + + if (hw->fc.current_mode == ixgbe_fc_rx_pause) { + pause->rx_pause = 1; + } else if (hw->fc.current_mode == ixgbe_fc_tx_pause) { + pause->tx_pause = 1; + } else if (hw->fc.current_mode == ixgbe_fc_full) { + pause->rx_pause = 1; + pause->tx_pause = 1; + } +} + +static int ixgbe_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_fc_info fc = hw->fc; + + /* 82598 does no support link flow control with DCB enabled */ + if ((hw->mac.type == ixgbe_mac_82598EB) && + (adapter->flags & IXGBE_FLAG_DCB_ENABLED)) + return -EINVAL; + + fc.disable_fc_autoneg = (pause->autoneg != AUTONEG_ENABLE); + + if ((pause->rx_pause && pause->tx_pause) || pause->autoneg) + fc.requested_mode = ixgbe_fc_full; + else if (pause->rx_pause) + fc.requested_mode = ixgbe_fc_rx_pause; + else if (pause->tx_pause) + fc.requested_mode = ixgbe_fc_tx_pause; + else + fc.requested_mode = ixgbe_fc_none; + + /* if the thing changed then we'll update and use new autoneg */ + if (memcmp(&fc, &hw->fc, sizeof(struct ixgbe_fc_info))) { + hw->fc = fc; + if (netif_running(netdev)) + ixgbe_reinit_locked(adapter); + else + ixgbe_reset(adapter); + } + + return 0; +} + +static u32 ixgbe_get_msglevel(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void ixgbe_set_msglevel(struct net_device *netdev, u32 data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = data; +} + +static int ixgbe_get_regs_len(struct net_device *netdev) +{ +#define IXGBE_REGS_LEN 1129 + return IXGBE_REGS_LEN * sizeof(u32); +} + +#define IXGBE_GET_STAT(_A_, _R_) (_A_->stats._R_) + + +static void ixgbe_get_regs(struct net_device *netdev, struct ethtool_regs *regs, + void *p) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u8 i; + + printk(KERN_DEBUG "ixgbe_get_regs_1\n"); + memset(p, 0, IXGBE_REGS_LEN * sizeof(u32)); + printk(KERN_DEBUG "ixgbe_get_regs_2 0x%p\n", hw->hw_addr); + + regs->version = (1 << 24) | hw->revision_id << 16 | hw->device_id; + + /* General Registers */ + regs_buff[0] = IXGBE_READ_REG(hw, IXGBE_CTRL); + printk(KERN_DEBUG "ixgbe_get_regs_3\n"); + regs_buff[1] = IXGBE_READ_REG(hw, IXGBE_STATUS); + regs_buff[2] = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + regs_buff[3] = IXGBE_READ_REG(hw, IXGBE_ESDP); + regs_buff[4] = IXGBE_READ_REG(hw, IXGBE_EODSDP); + regs_buff[5] = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + regs_buff[6] = IXGBE_READ_REG(hw, IXGBE_FRTIMER); + regs_buff[7] = IXGBE_READ_REG(hw, IXGBE_TCPTIMER); + + printk(KERN_DEBUG "ixgbe_get_regs_4\n"); + + /* NVM Register */ + regs_buff[8] = IXGBE_READ_REG(hw, IXGBE_EEC); + regs_buff[9] = IXGBE_READ_REG(hw, IXGBE_EERD); + regs_buff[10] = IXGBE_READ_REG(hw, IXGBE_FLA); + regs_buff[11] = IXGBE_READ_REG(hw, IXGBE_EEMNGCTL); + regs_buff[12] = IXGBE_READ_REG(hw, IXGBE_EEMNGDATA); + regs_buff[13] = IXGBE_READ_REG(hw, IXGBE_FLMNGCTL); + regs_buff[14] = IXGBE_READ_REG(hw, IXGBE_FLMNGDATA); + regs_buff[15] = IXGBE_READ_REG(hw, IXGBE_FLMNGCNT); + regs_buff[16] = IXGBE_READ_REG(hw, IXGBE_FLOP); + regs_buff[17] = IXGBE_READ_REG(hw, IXGBE_GRC); + + /* Interrupt */ + /* don't read EICR because it can clear interrupt causes, instead + * read EICS which is a shadow but doesn't clear EICR */ + regs_buff[18] = IXGBE_READ_REG(hw, IXGBE_EICS); + regs_buff[19] = IXGBE_READ_REG(hw, IXGBE_EICS); + regs_buff[20] = IXGBE_READ_REG(hw, IXGBE_EIMS); + regs_buff[21] = IXGBE_READ_REG(hw, IXGBE_EIMC); + regs_buff[22] = IXGBE_READ_REG(hw, IXGBE_EIAC); + regs_buff[23] = IXGBE_READ_REG(hw, IXGBE_EIAM); + regs_buff[24] = IXGBE_READ_REG(hw, IXGBE_EITR(0)); + regs_buff[25] = IXGBE_READ_REG(hw, IXGBE_IVAR(0)); + regs_buff[26] = IXGBE_READ_REG(hw, IXGBE_MSIXT); + regs_buff[27] = IXGBE_READ_REG(hw, IXGBE_MSIXPBA); + regs_buff[28] = IXGBE_READ_REG(hw, IXGBE_PBACL(0)); + regs_buff[29] = IXGBE_READ_REG(hw, IXGBE_GPIE); + + /* Flow Control */ + regs_buff[30] = IXGBE_READ_REG(hw, IXGBE_PFCTOP); + regs_buff[31] = IXGBE_READ_REG(hw, IXGBE_FCTTV(0)); + regs_buff[32] = IXGBE_READ_REG(hw, IXGBE_FCTTV(1)); + regs_buff[33] = IXGBE_READ_REG(hw, IXGBE_FCTTV(2)); + regs_buff[34] = IXGBE_READ_REG(hw, IXGBE_FCTTV(3)); + for (i = 0; i < 8; i++) { + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL(i)); + regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH(i)); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + regs_buff[35 + i] = IXGBE_READ_REG(hw, + IXGBE_FCRTL_82599(i)); + regs_buff[43 + i] = IXGBE_READ_REG(hw, + IXGBE_FCRTH_82599(i)); + break; + default: + break; + } + } + regs_buff[51] = IXGBE_READ_REG(hw, IXGBE_FCRTV); + regs_buff[52] = IXGBE_READ_REG(hw, IXGBE_TFCS); + + /* Receive DMA */ + for (i = 0; i < 64; i++) + regs_buff[53 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i)); + for (i = 0; i < 64; i++) + regs_buff[117 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i)); + for (i = 0; i < 64; i++) + regs_buff[181 + i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i)); + for (i = 0; i < 64; i++) + regs_buff[245 + i] = IXGBE_READ_REG(hw, IXGBE_RDH(i)); + for (i = 0; i < 64; i++) + regs_buff[309 + i] = IXGBE_READ_REG(hw, IXGBE_RDT(i)); + for (i = 0; i < 64; i++) + regs_buff[373 + i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); + for (i = 0; i < 16; i++) + regs_buff[437 + i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i)); + for (i = 0; i < 16; i++) + regs_buff[453 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + regs_buff[469] = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); + for (i = 0; i < 8; i++) + regs_buff[470 + i] = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)); + regs_buff[478] = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + regs_buff[479] = IXGBE_READ_REG(hw, IXGBE_DROPEN); + + /* Receive */ + regs_buff[480] = IXGBE_READ_REG(hw, IXGBE_RXCSUM); + regs_buff[481] = IXGBE_READ_REG(hw, IXGBE_RFCTL); + for (i = 0; i < 16; i++) + regs_buff[482 + i] = IXGBE_READ_REG(hw, IXGBE_RAL(i)); + for (i = 0; i < 16; i++) + regs_buff[498 + i] = IXGBE_READ_REG(hw, IXGBE_RAH(i)); + regs_buff[514] = IXGBE_READ_REG(hw, IXGBE_PSRTYPE(0)); + regs_buff[515] = IXGBE_READ_REG(hw, IXGBE_FCTRL); + regs_buff[516] = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + regs_buff[517] = IXGBE_READ_REG(hw, IXGBE_MCSTCTRL); + regs_buff[518] = IXGBE_READ_REG(hw, IXGBE_MRQC); + regs_buff[519] = IXGBE_READ_REG(hw, IXGBE_VMD_CTL); + for (i = 0; i < 8; i++) + regs_buff[520 + i] = IXGBE_READ_REG(hw, IXGBE_IMIR(i)); + for (i = 0; i < 8; i++) + regs_buff[528 + i] = IXGBE_READ_REG(hw, IXGBE_IMIREXT(i)); + regs_buff[536] = IXGBE_READ_REG(hw, IXGBE_IMIRVP); + + /* Transmit */ + for (i = 0; i < 32; i++) + regs_buff[537 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i)); + for (i = 0; i < 32; i++) + regs_buff[569 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i)); + for (i = 0; i < 32; i++) + regs_buff[601 + i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i)); + for (i = 0; i < 32; i++) + regs_buff[633 + i] = IXGBE_READ_REG(hw, IXGBE_TDH(i)); + for (i = 0; i < 32; i++) + regs_buff[665 + i] = IXGBE_READ_REG(hw, IXGBE_TDT(i)); + for (i = 0; i < 32; i++) + regs_buff[697 + i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i)); + for (i = 0; i < 32; i++) + regs_buff[729 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAL(i)); + for (i = 0; i < 32; i++) + regs_buff[761 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAH(i)); + regs_buff[793] = IXGBE_READ_REG(hw, IXGBE_DTXCTL); + for (i = 0; i < 16; i++) + regs_buff[794 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); + regs_buff[810] = IXGBE_READ_REG(hw, IXGBE_TIPG); + for (i = 0; i < 8; i++) + regs_buff[811 + i] = IXGBE_READ_REG(hw, IXGBE_TXPBSIZE(i)); + regs_buff[819] = IXGBE_READ_REG(hw, IXGBE_MNGTXMAP); + + /* Wake Up */ + regs_buff[820] = IXGBE_READ_REG(hw, IXGBE_WUC); + regs_buff[821] = IXGBE_READ_REG(hw, IXGBE_WUFC); + regs_buff[822] = IXGBE_READ_REG(hw, IXGBE_WUS); + regs_buff[823] = IXGBE_READ_REG(hw, IXGBE_IPAV); + regs_buff[824] = IXGBE_READ_REG(hw, IXGBE_IP4AT); + regs_buff[825] = IXGBE_READ_REG(hw, IXGBE_IP6AT); + regs_buff[826] = IXGBE_READ_REG(hw, IXGBE_WUPL); + regs_buff[827] = IXGBE_READ_REG(hw, IXGBE_WUPM); + regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT(0)); + + /* DCB */ + regs_buff[829] = IXGBE_READ_REG(hw, IXGBE_RMCS); + regs_buff[830] = IXGBE_READ_REG(hw, IXGBE_DPMCS); + regs_buff[831] = IXGBE_READ_REG(hw, IXGBE_PDPMCS); + regs_buff[832] = IXGBE_READ_REG(hw, IXGBE_RUPPBMR); + for (i = 0; i < 8; i++) + regs_buff[833 + i] = IXGBE_READ_REG(hw, IXGBE_RT2CR(i)); + for (i = 0; i < 8; i++) + regs_buff[841 + i] = IXGBE_READ_REG(hw, IXGBE_RT2SR(i)); + for (i = 0; i < 8; i++) + regs_buff[849 + i] = IXGBE_READ_REG(hw, IXGBE_TDTQ2TCCR(i)); + for (i = 0; i < 8; i++) + regs_buff[857 + i] = IXGBE_READ_REG(hw, IXGBE_TDTQ2TCSR(i)); + for (i = 0; i < 8; i++) + regs_buff[865 + i] = IXGBE_READ_REG(hw, IXGBE_TDPT2TCCR(i)); + for (i = 0; i < 8; i++) + regs_buff[873 + i] = IXGBE_READ_REG(hw, IXGBE_TDPT2TCSR(i)); + + /* Statistics */ + regs_buff[881] = IXGBE_GET_STAT(adapter, crcerrs); + regs_buff[882] = IXGBE_GET_STAT(adapter, illerrc); + regs_buff[883] = IXGBE_GET_STAT(adapter, errbc); + regs_buff[884] = IXGBE_GET_STAT(adapter, mspdc); + for (i = 0; i < 8; i++) + regs_buff[885 + i] = IXGBE_GET_STAT(adapter, mpc[i]); + regs_buff[893] = IXGBE_GET_STAT(adapter, mlfc); + regs_buff[894] = IXGBE_GET_STAT(adapter, mrfc); + regs_buff[895] = IXGBE_GET_STAT(adapter, rlec); + regs_buff[896] = IXGBE_GET_STAT(adapter, lxontxc); + regs_buff[897] = IXGBE_GET_STAT(adapter, lxonrxc); + regs_buff[898] = IXGBE_GET_STAT(adapter, lxofftxc); + regs_buff[899] = IXGBE_GET_STAT(adapter, lxoffrxc); + for (i = 0; i < 8; i++) + regs_buff[900 + i] = IXGBE_GET_STAT(adapter, pxontxc[i]); + for (i = 0; i < 8; i++) + regs_buff[908 + i] = IXGBE_GET_STAT(adapter, pxonrxc[i]); + for (i = 0; i < 8; i++) + regs_buff[916 + i] = IXGBE_GET_STAT(adapter, pxofftxc[i]); + for (i = 0; i < 8; i++) + regs_buff[924 + i] = IXGBE_GET_STAT(adapter, pxoffrxc[i]); + regs_buff[932] = IXGBE_GET_STAT(adapter, prc64); + regs_buff[933] = IXGBE_GET_STAT(adapter, prc127); + regs_buff[934] = IXGBE_GET_STAT(adapter, prc255); + regs_buff[935] = IXGBE_GET_STAT(adapter, prc511); + regs_buff[936] = IXGBE_GET_STAT(adapter, prc1023); + regs_buff[937] = IXGBE_GET_STAT(adapter, prc1522); + regs_buff[938] = IXGBE_GET_STAT(adapter, gprc); + regs_buff[939] = IXGBE_GET_STAT(adapter, bprc); + regs_buff[940] = IXGBE_GET_STAT(adapter, mprc); + regs_buff[941] = IXGBE_GET_STAT(adapter, gptc); + regs_buff[942] = IXGBE_GET_STAT(adapter, gorc); + regs_buff[944] = IXGBE_GET_STAT(adapter, gotc); + for (i = 0; i < 8; i++) + regs_buff[946 + i] = IXGBE_GET_STAT(adapter, rnbc[i]); + regs_buff[954] = IXGBE_GET_STAT(adapter, ruc); + regs_buff[955] = IXGBE_GET_STAT(adapter, rfc); + regs_buff[956] = IXGBE_GET_STAT(adapter, roc); + regs_buff[957] = IXGBE_GET_STAT(adapter, rjc); + regs_buff[958] = IXGBE_GET_STAT(adapter, mngprc); + regs_buff[959] = IXGBE_GET_STAT(adapter, mngpdc); + regs_buff[960] = IXGBE_GET_STAT(adapter, mngptc); + regs_buff[961] = IXGBE_GET_STAT(adapter, tor); + regs_buff[963] = IXGBE_GET_STAT(adapter, tpr); + regs_buff[964] = IXGBE_GET_STAT(adapter, tpt); + regs_buff[965] = IXGBE_GET_STAT(adapter, ptc64); + regs_buff[966] = IXGBE_GET_STAT(adapter, ptc127); + regs_buff[967] = IXGBE_GET_STAT(adapter, ptc255); + regs_buff[968] = IXGBE_GET_STAT(adapter, ptc511); + regs_buff[969] = IXGBE_GET_STAT(adapter, ptc1023); + regs_buff[970] = IXGBE_GET_STAT(adapter, ptc1522); + regs_buff[971] = IXGBE_GET_STAT(adapter, mptc); + regs_buff[972] = IXGBE_GET_STAT(adapter, bptc); + regs_buff[973] = IXGBE_GET_STAT(adapter, xec); + for (i = 0; i < 16; i++) + regs_buff[974 + i] = IXGBE_GET_STAT(adapter, qprc[i]); + for (i = 0; i < 16; i++) + regs_buff[990 + i] = IXGBE_GET_STAT(adapter, qptc[i]); + for (i = 0; i < 16; i++) + regs_buff[1006 + i] = IXGBE_GET_STAT(adapter, qbrc[i]); + for (i = 0; i < 16; i++) + regs_buff[1022 + i] = IXGBE_GET_STAT(adapter, qbtc[i]); + + /* MAC */ + regs_buff[1038] = IXGBE_READ_REG(hw, IXGBE_PCS1GCFIG); + regs_buff[1039] = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); + regs_buff[1040] = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); + regs_buff[1041] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG0); + regs_buff[1042] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG1); + regs_buff[1043] = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); + regs_buff[1044] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); + regs_buff[1045] = IXGBE_READ_REG(hw, IXGBE_PCS1GANNP); + regs_buff[1046] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLPNP); + regs_buff[1047] = IXGBE_READ_REG(hw, IXGBE_HLREG0); + regs_buff[1048] = IXGBE_READ_REG(hw, IXGBE_HLREG1); + regs_buff[1049] = IXGBE_READ_REG(hw, IXGBE_PAP); + regs_buff[1050] = IXGBE_READ_REG(hw, IXGBE_MACA); + regs_buff[1051] = IXGBE_READ_REG(hw, IXGBE_APAE); + regs_buff[1052] = IXGBE_READ_REG(hw, IXGBE_ARD); + regs_buff[1053] = IXGBE_READ_REG(hw, IXGBE_AIS); + regs_buff[1054] = IXGBE_READ_REG(hw, IXGBE_MSCA); + regs_buff[1055] = IXGBE_READ_REG(hw, IXGBE_MSRWD); + regs_buff[1056] = IXGBE_READ_REG(hw, IXGBE_MLADD); + regs_buff[1057] = IXGBE_READ_REG(hw, IXGBE_MHADD); + regs_buff[1058] = IXGBE_READ_REG(hw, IXGBE_TREG); + regs_buff[1059] = IXGBE_READ_REG(hw, IXGBE_PCSS1); + regs_buff[1060] = IXGBE_READ_REG(hw, IXGBE_PCSS2); + regs_buff[1061] = IXGBE_READ_REG(hw, IXGBE_XPCSS); + regs_buff[1062] = IXGBE_READ_REG(hw, IXGBE_SERDESC); + regs_buff[1063] = IXGBE_READ_REG(hw, IXGBE_MACS); + regs_buff[1064] = IXGBE_READ_REG(hw, IXGBE_AUTOC); + regs_buff[1065] = IXGBE_READ_REG(hw, IXGBE_LINKS); + regs_buff[1066] = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + regs_buff[1067] = IXGBE_READ_REG(hw, IXGBE_AUTOC3); + regs_buff[1068] = IXGBE_READ_REG(hw, IXGBE_ANLP1); + regs_buff[1069] = IXGBE_READ_REG(hw, IXGBE_ANLP2); + regs_buff[1070] = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); + + /* Diagnostic */ + regs_buff[1071] = IXGBE_READ_REG(hw, IXGBE_RDSTATCTL); + for (i = 0; i < 8; i++) + regs_buff[1072 + i] = IXGBE_READ_REG(hw, IXGBE_RDSTAT(i)); + regs_buff[1080] = IXGBE_READ_REG(hw, IXGBE_RDHMPN); + for (i = 0; i < 4; i++) + regs_buff[1081 + i] = IXGBE_READ_REG(hw, IXGBE_RIC_DW(i)); + regs_buff[1085] = IXGBE_READ_REG(hw, IXGBE_RDPROBE); + regs_buff[1086] = IXGBE_READ_REG(hw, IXGBE_TDSTATCTL); + for (i = 0; i < 8; i++) + regs_buff[1087 + i] = IXGBE_READ_REG(hw, IXGBE_TDSTAT(i)); + regs_buff[1095] = IXGBE_READ_REG(hw, IXGBE_TDHMPN); + for (i = 0; i < 4; i++) + regs_buff[1096 + i] = IXGBE_READ_REG(hw, IXGBE_TIC_DW(i)); + regs_buff[1100] = IXGBE_READ_REG(hw, IXGBE_TDPROBE); + regs_buff[1101] = IXGBE_READ_REG(hw, IXGBE_TXBUFCTRL); + regs_buff[1102] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA0); + regs_buff[1103] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA1); + regs_buff[1104] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA2); + regs_buff[1105] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA3); + regs_buff[1106] = IXGBE_READ_REG(hw, IXGBE_RXBUFCTRL); + regs_buff[1107] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA0); + regs_buff[1108] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA1); + regs_buff[1109] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA2); + regs_buff[1110] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA3); + for (i = 0; i < 8; i++) + regs_buff[1111 + i] = IXGBE_READ_REG(hw, IXGBE_PCIE_DIAG(i)); + regs_buff[1119] = IXGBE_READ_REG(hw, IXGBE_RFVAL); + regs_buff[1120] = IXGBE_READ_REG(hw, IXGBE_MDFTC1); + regs_buff[1121] = IXGBE_READ_REG(hw, IXGBE_MDFTC2); + regs_buff[1122] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO1); + regs_buff[1123] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO2); + regs_buff[1124] = IXGBE_READ_REG(hw, IXGBE_MDFTS); + regs_buff[1125] = IXGBE_READ_REG(hw, IXGBE_PCIEECCCTL); + regs_buff[1126] = IXGBE_READ_REG(hw, IXGBE_PBTXECC); + regs_buff[1127] = IXGBE_READ_REG(hw, IXGBE_PBRXECC); + + /* 82599 X540 specific registers */ + regs_buff[1128] = IXGBE_READ_REG(hw, IXGBE_MFLCN); +} + +static int ixgbe_get_eeprom_len(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + return adapter->hw.eeprom.word_size * 2; +} + +static int ixgbe_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u16 *eeprom_buff; + int first_word, last_word, eeprom_len; + int ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EINVAL; + + eeprom->magic = hw->vendor_id | (hw->device_id << 16); + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + eeprom_len = last_word - first_word + 1; + + eeprom_buff = kmalloc(sizeof(u16) * eeprom_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + ret_val = ixgbe_read_eeprom_buffer(hw, first_word, eeprom_len, + eeprom_buff); + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < eeprom_len; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); + kfree(eeprom_buff); + + return ret_val; +} + +static int ixgbe_set_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u16 *eeprom_buff; + void *ptr; + int max_len, first_word, last_word, ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EINVAL; + + if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) + return -EINVAL; + + max_len = hw->eeprom.word_size * 2; + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + eeprom_buff = kmalloc(max_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + ptr = eeprom_buff; + + if (eeprom->offset & 1) { + /* + * need read/modify/write of first changed EEPROM word + * only the second byte of the word is being modified + */ + ret_val = ixgbe_read_eeprom(hw, first_word, &eeprom_buff[0]); + if (ret_val) + goto err; + + ptr++; + } + if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) { + /* + * need read/modify/write of last changed EEPROM word + * only the first byte of the word is being modified + */ + ret_val = ixgbe_read_eeprom(hw, last_word, + &eeprom_buff[last_word - first_word]); + if (ret_val) + goto err; + } + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(ptr, bytes, eeprom->len); + + for (i = 0; i < last_word - first_word + 1; i++) + cpu_to_le16s(&eeprom_buff[i]); + + ret_val = ixgbe_write_eeprom_buffer(hw, first_word, + last_word - first_word + 1, + eeprom_buff); + + /* Update the checksum */ + if (ret_val == 0) + ixgbe_update_eeprom_checksum(hw); + +err: + kfree(eeprom_buff); + return ret_val; +} + +static void ixgbe_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + strlcpy(drvinfo->driver, ixgbe_driver_name, sizeof(drvinfo->driver)); + + strlcpy(drvinfo->version, ixgbe_driver_version, + sizeof(drvinfo->version)); + + strlcpy(drvinfo->fw_version, adapter->eeprom_id, + sizeof(drvinfo->fw_version)); + + strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info)); + + drvinfo->n_stats = IXGBE_STATS_LEN; + drvinfo->testinfo_len = IXGBE_TEST_LEN; + drvinfo->regdump_len = ixgbe_get_regs_len(netdev); +} + +static void ixgbe_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + ring->rx_max_pending = IXGBE_MAX_RXD; + ring->tx_max_pending = IXGBE_MAX_TXD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = adapter->rx_ring_count; + ring->tx_pending = adapter->tx_ring_count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} + +static int ixgbe_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_ring *tx_ring = NULL, *rx_ring = NULL; + u32 new_rx_count, new_tx_count; + int i, err = 0; + + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + return -EINVAL; + + new_tx_count = clamp_t(u32, ring->tx_pending, + IXGBE_MIN_TXD, IXGBE_MAX_TXD); + new_tx_count = ALIGN(new_tx_count, IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE); + + new_rx_count = clamp_t(u32, ring->rx_pending, + IXGBE_MIN_RXD, IXGBE_MAX_RXD); + new_rx_count = ALIGN(new_rx_count, IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE); + + /* if nothing to do return success */ + if ((new_tx_count == adapter->tx_ring_count) && + (new_rx_count == adapter->rx_ring_count)) + return 0; + + while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + + if (!netif_running(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i]->count = new_tx_count; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i]->count = new_rx_count; + adapter->tx_ring_count = new_tx_count; + adapter->rx_ring_count = new_rx_count; + goto clear_reset; + } + + /* alloc updated Tx resources */ + if (new_tx_count != adapter->tx_ring_count) { + tx_ring = vmalloc(adapter->num_tx_queues * sizeof(*tx_ring)); + if (!tx_ring) { + err = -ENOMEM; + goto clear_reset; + } + + for (i = 0; i < adapter->num_tx_queues; i++) { + /* clone ring and setup updated count */ + tx_ring[i] = *adapter->tx_ring[i]; + tx_ring[i].count = new_tx_count; + err = ixgbe_setup_tx_resources(&tx_ring[i]); + if (err) { + while (i) { + i--; + ixgbe_free_tx_resources(&tx_ring[i]); + } + + vfree(tx_ring); + tx_ring = NULL; + + goto clear_reset; + } + } + } + + /* alloc updated Rx resources */ + if (new_rx_count != adapter->rx_ring_count) { + rx_ring = vmalloc(adapter->num_rx_queues * sizeof(*rx_ring)); + if (!rx_ring) { + err = -ENOMEM; + goto clear_reset; + } + + for (i = 0; i < adapter->num_rx_queues; i++) { + /* clone ring and setup updated count */ + rx_ring[i] = *adapter->rx_ring[i]; + rx_ring[i].count = new_rx_count; + err = ixgbe_setup_rx_resources(&rx_ring[i]); + if (err) { + while (i) { + i--; + ixgbe_free_rx_resources(&rx_ring[i]); + } + + vfree(rx_ring); + rx_ring = NULL; + + goto clear_reset; + } + } + } + + /* bring interface down to prepare for update */ + ixgbe_down(adapter); + + /* Tx */ + if (tx_ring) { + for (i = 0; i < adapter->num_tx_queues; i++) { + ixgbe_free_tx_resources(adapter->tx_ring[i]); + *adapter->tx_ring[i] = tx_ring[i]; + } + adapter->tx_ring_count = new_tx_count; + + vfree(tx_ring); + tx_ring = NULL; + } + + /* Rx */ + if (rx_ring) { + for (i = 0; i < adapter->num_rx_queues; i++) { + ixgbe_free_rx_resources(adapter->rx_ring[i]); + *adapter->rx_ring[i] = rx_ring[i]; + } + adapter->rx_ring_count = new_rx_count; + + vfree(rx_ring); + rx_ring = NULL; + } + + /* restore interface using new values */ + ixgbe_up(adapter); + +clear_reset: + /* free Tx resources if Rx error is encountered */ + if (tx_ring) { + for (i = 0; i < adapter->num_tx_queues; i++) + ixgbe_free_tx_resources(&tx_ring[i]); + vfree(tx_ring); + } + + clear_bit(__IXGBE_RESETTING, &adapter->state); + return err; +} + +#ifndef HAVE_ETHTOOL_GET_SSET_COUNT +static int ixgbe_get_stats_count(struct net_device *netdev) +{ + return IXGBE_STATS_LEN; +} + +#else /* HAVE_ETHTOOL_GET_SSET_COUNT */ +static int ixgbe_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_TEST: + return IXGBE_TEST_LEN; + case ETH_SS_STATS: + return IXGBE_STATS_LEN; + default: + return -EOPNOTSUPP; + } +} + +#endif /* HAVE_ETHTOOL_GET_SSET_COUNT */ +static void ixgbe_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); +#ifdef HAVE_NETDEV_STATS_IN_NETDEV + struct net_device_stats *net_stats = &netdev->stats; +#else + struct net_device_stats *net_stats = &adapter->net_stats; +#endif + u64 *queue_stat; + int stat_count = sizeof(struct ixgbe_queue_stats) / sizeof(u64); + int i, j, k; + char *p; + + printk(KERN_DEBUG "ixgbe_stats 0\n"); + ixgbe_update_stats(adapter); + printk(KERN_DEBUG "ixgbe_stats 1\n"); + + for (i = 0; i < IXGBE_NETDEV_STATS_LEN; i++) { + p = (char *)net_stats + ixgbe_gstrings_net_stats[i].stat_offset; + data[i] = (ixgbe_gstrings_net_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + for (j = 0; j < IXGBE_GLOBAL_STATS_LEN; j++, i++) { + p = (char *)adapter + ixgbe_gstrings_stats[j].stat_offset; + data[i] = (ixgbe_gstrings_stats[j].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + printk(KERN_DEBUG "ixgbe_stats 2\n"); +#ifdef NO_VNIC + for (j = 0; j < adapter->num_tx_queues; j++) { + queue_stat = (u64 *)&adapter->tx_ring[j]->stats; + for (k = 0; k < stat_count; k++) + data[i + k] = queue_stat[k]; + i += k; + } + for (j = 0; j < adapter->num_rx_queues; j++) { + queue_stat = (u64 *)&adapter->rx_ring[j]->stats; + for (k = 0; k < stat_count; k++) + data[i + k] = queue_stat[k]; + i += k; + } + printk(KERN_DEBUG "ixgbe_stats 3\n"); +#endif + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + for (j = 0; j < MAX_TX_PACKET_BUFFERS; j++) { + data[i++] = adapter->stats.pxontxc[j]; + data[i++] = adapter->stats.pxofftxc[j]; + } + for (j = 0; j < MAX_RX_PACKET_BUFFERS; j++) { + data[i++] = adapter->stats.pxonrxc[j]; + data[i++] = adapter->stats.pxoffrxc[j]; + } + } + printk(KERN_DEBUG "ixgbe_stats 4\n"); + stat_count = sizeof(struct vf_stats) / sizeof(u64); + for (j = 0; j < adapter->num_vfs; j++) { + queue_stat = (u64 *)&adapter->vfinfo[j].vfstats; + for (k = 0; k < stat_count; k++) + data[i + k] = queue_stat[k]; + queue_stat = (u64 *)&adapter->vfinfo[j].saved_rst_vfstats; + for (k = 0; k < stat_count; k++) + data[i + k] += queue_stat[k]; + i += k; + } +} + +static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, + u8 *data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + char *p = (char *)data; + int i; + + switch (stringset) { + case ETH_SS_TEST: + memcpy(data, *ixgbe_gstrings_test, + IXGBE_TEST_LEN * ETH_GSTRING_LEN); + break; + case ETH_SS_STATS: + for (i = 0; i < IXGBE_NETDEV_STATS_LEN; i++) { + memcpy(p, ixgbe_gstrings_net_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) { + memcpy(p, ixgbe_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_tx_queues; i++) { + sprintf(p, "tx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_rx_queues; i++) { + sprintf(p, "rx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + } + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) { + sprintf(p, "tx_pb_%u_pxon", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_pb_%u_pxoff", i); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < MAX_RX_PACKET_BUFFERS; i++) { + sprintf(p, "rx_pb_%u_pxon", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_pb_%u_pxoff", i); + p += ETH_GSTRING_LEN; + } + } + for (i = 0; i < adapter->num_vfs; i++) { + sprintf(p, "VF %d Rx Packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "VF %d Rx Bytes", i); + p += ETH_GSTRING_LEN; + sprintf(p, "VF %d Tx Packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "VF %d Tx Bytes", i); + p += ETH_GSTRING_LEN; + sprintf(p, "VF %d MC Packets", i); + p += ETH_GSTRING_LEN; + } + /* BUG_ON(p - data != IXGBE_STATS_LEN * ETH_GSTRING_LEN); */ + break; + } +} + +static int ixgbe_link_test(struct ixgbe_adapter *adapter, u64 *data) +{ + struct ixgbe_hw *hw = &adapter->hw; + bool link_up; + u32 link_speed = 0; + *data = 0; + + hw->mac.ops.check_link(hw, &link_speed, &link_up, true); + if (link_up) + return *data; + else + *data = 1; + return *data; +} + +/* ethtool register test data */ +struct ixgbe_reg_test { + u16 reg; + u8 array_len; + u8 test_type; + u32 mask; + u32 write; +}; + +/* In the hardware, registers are laid out either singly, in arrays + * spaced 0x40 bytes apart, or in contiguous tables. We assume + * most tests take place on arrays or single registers (handled + * as a single-element array) and special-case the tables. + * Table tests are always pattern tests. + * + * We also make provision for some required setup steps by specifying + * registers to be written without any read-back testing. + */ + +#define PATTERN_TEST 1 +#define SET_READ_TEST 2 +#define WRITE_NO_TEST 3 +#define TABLE32_TEST 4 +#define TABLE64_TEST_LO 5 +#define TABLE64_TEST_HI 6 + +/* default 82599 register test */ +static struct ixgbe_reg_test reg_test_82599[] = { + { IXGBE_FCRTL_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, + { IXGBE_FCRTH_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, + { IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 }, + { IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 }, + { IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE }, + { IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 }, + { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, + { IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFF80 }, + { IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000001, 0x00000001 }, + { IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x8001FFFF, 0x800CFFFF }, + { IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +/* default 82598 register test */ +static struct ixgbe_reg_test reg_test_82598[] = { + { IXGBE_FCRTL(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, + { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, + { IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 }, + { IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + /* Enable all four RX queues before testing. */ + { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE }, + /* RDH is read-only for 82598, only test RDT. */ + { IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 }, + { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, + { IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_TIPG, 1, PATTERN_TEST, 0x000000FF, 0x000000FF }, + { IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000003, 0x00000003 }, + { IXGBE_DTXCTL, 1, SET_READ_TEST, 0x00000005, 0x00000005 }, + { IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x800CFFFF, 0x800CFFFF }, + { IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +#define REG_PATTERN_TEST(R, M, W) \ +{ \ + u32 pat, val, before; \ + const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \ + for (pat = 0; pat < ARRAY_SIZE(_test); pat++) { \ + before = readl(adapter->hw.hw_addr + R); \ + writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \ + val = readl(adapter->hw.hw_addr + R); \ + if (val != (_test[pat] & W & M)) { \ + e_err(drv, "pattern test reg %04X failed: got " \ + "0x%08X expected 0x%08X\n", \ + R, val, (_test[pat] & W & M)); \ + *data = R; \ + writel(before, adapter->hw.hw_addr + R); \ + return 1; \ + } \ + writel(before, adapter->hw.hw_addr + R); \ + } \ +} + +#define REG_SET_AND_CHECK(R, M, W) \ +{ \ + u32 val, before; \ + before = readl(adapter->hw.hw_addr + R); \ + writel((W & M), (adapter->hw.hw_addr + R)); \ + val = readl(adapter->hw.hw_addr + R); \ + if ((W & M) != (val & M)) { \ + e_err(drv, "set/check reg %04X test failed: got 0x%08X " \ + "expected 0x%08X\n", R, (val & M), (W & M)); \ + *data = R; \ + writel(before, (adapter->hw.hw_addr + R)); \ + return 1; \ + } \ + writel(before, (adapter->hw.hw_addr + R)); \ +} + +static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data) +{ + struct ixgbe_reg_test *test; + u32 value, status_before, status_after; + u32 i, toggle; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: + toggle = 0x7FFFF3FF; + test = reg_test_82598; + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + toggle = 0x7FFFF30F; + test = reg_test_82599; + break; + default: + *data = 1; + return 1; + break; + } + + /* + * Because the status register is such a special case, + * we handle it separately from the rest of the register + * tests. Some bits are read-only, some toggle, and some + * are writeable on newer MACs. + */ + status_before = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS); + value = (IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle); + status_after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle; + if (value != status_after) { + e_err(drv, "failed STATUS register test got: " + "0x%08X expected: 0x%08X\n", status_after, value); + *data = 1; + return 1; + } + /* restore previous status */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, status_before); + + /* + * Perform the remainder of the register test, looping through + * the test table until we either fail or reach the null entry. + */ + while (test->reg) { + for (i = 0; i < test->array_len; i++) { + switch (test->test_type) { + case PATTERN_TEST: + REG_PATTERN_TEST(test->reg + (i * 0x40), + test->mask, + test->write); + break; + case SET_READ_TEST: + REG_SET_AND_CHECK(test->reg + (i * 0x40), + test->mask, + test->write); + break; + case WRITE_NO_TEST: + writel(test->write, + (adapter->hw.hw_addr + test->reg) + + (i * 0x40)); + break; + case TABLE32_TEST: + REG_PATTERN_TEST(test->reg + (i * 4), + test->mask, + test->write); + break; + case TABLE64_TEST_LO: + REG_PATTERN_TEST(test->reg + (i * 8), + test->mask, + test->write); + break; + case TABLE64_TEST_HI: + REG_PATTERN_TEST((test->reg + 4) + (i * 8), + test->mask, + test->write); + break; + } + } + test++; + } + + *data = 0; + return 0; +} + +static int ixgbe_eeprom_test(struct ixgbe_adapter *adapter, u64 *data) +{ + if (ixgbe_validate_eeprom_checksum(&adapter->hw, NULL)) + *data = 1; + else + *data = 0; + return *data; +} + +static irqreturn_t ixgbe_test_intr(int irq, void *data) +{ + struct net_device *netdev = data; + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + adapter->test_icr |= IXGBE_READ_REG(&adapter->hw, IXGBE_EICR); + + return IRQ_HANDLED; +} + +static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data) +{ + struct net_device *netdev = adapter->netdev; + u32 mask, i = 0, shared_int = true; + u32 irq = adapter->pdev->irq; + + *data = 0; + + /* Hook up test interrupt handler just for this test */ + if (adapter->msix_entries) { + /* NOTE: we don't test MSI-X interrupts here, yet */ + return 0; + } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { + shared_int = false; + if (request_irq(irq, &ixgbe_test_intr, 0, netdev->name, + netdev)) { + *data = 1; + return -1; + } + } else if (!request_irq(irq, &ixgbe_test_intr, IRQF_PROBE_SHARED, + netdev->name, netdev)) { + shared_int = false; + } else if (request_irq(irq, &ixgbe_test_intr, IRQF_SHARED, + netdev->name, netdev)) { + *data = 1; + return -1; + } + e_info(hw, "testing %s interrupt\n", + (shared_int ? "shared" : "unshared")); + + /* Disable all the interrupts */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF); + IXGBE_WRITE_FLUSH(&adapter->hw); + usleep_range(10000, 20000); + + /* Test each interrupt */ + for (; i < 10; i++) { + /* Interrupt to test */ + mask = 1 << i; + + if (!shared_int) { + /* + * Disable the interrupts to be reported in + * the cause register and then force the same + * interrupt and see if one gets posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, + ~mask & 0x00007FFF); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, + ~mask & 0x00007FFF); + IXGBE_WRITE_FLUSH(&adapter->hw); + usleep_range(10000, 20000); + + if (adapter->test_icr & mask) { + *data = 3; + break; + } + } + + /* + * Enable the interrupt to be reported in the cause + * register and then force the same interrupt and see + * if one gets posted. If an interrupt was not posted + * to the bus, the test failed. + */ + adapter->test_icr = 0; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask); + IXGBE_WRITE_FLUSH(&adapter->hw); + usleep_range(10000, 20000); + + if (!(adapter->test_icr & mask)) { + *data = 4; + break; + } + + if (!shared_int) { + /* + * Disable the other interrupts to be reported in + * the cause register and then force the other + * interrupts and see if any get posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, + ~mask & 0x00007FFF); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, + ~mask & 0x00007FFF); + IXGBE_WRITE_FLUSH(&adapter->hw); + usleep_range(10000, 20000); + + if (adapter->test_icr) { + *data = 5; + break; + } + } + } + + /* Disable all the interrupts */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF); + IXGBE_WRITE_FLUSH(&adapter->hw); + usleep_range(10000, 20000); + + /* Unhook test interrupt handler */ + free_irq(irq, netdev); + + return *data; +} + + + +static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 reg_data; + + /* X540 needs to set the MACC.FLU bit to force link up */ + if (adapter->hw.mac.type == ixgbe_mac_X540) { + reg_data = IXGBE_READ_REG(hw, IXGBE_MACC); + reg_data |= IXGBE_MACC_FLU; + IXGBE_WRITE_REG(hw, IXGBE_MACC, reg_data); + } + + /* right now we only support MAC loopback in the driver */ + reg_data = IXGBE_READ_REG(hw, IXGBE_HLREG0); + /* Setup MAC loopback */ + reg_data |= IXGBE_HLREG0_LPBK; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg_data); + + reg_data = IXGBE_READ_REG(hw, IXGBE_FCTRL); + reg_data |= IXGBE_FCTRL_BAM | IXGBE_FCTRL_SBP | IXGBE_FCTRL_MPE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg_data); + + reg_data = IXGBE_READ_REG(hw, IXGBE_AUTOC); + reg_data &= ~IXGBE_AUTOC_LMS_MASK; + reg_data |= IXGBE_AUTOC_LMS_10G_LINK_NO_AN | IXGBE_AUTOC_FLU; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_data); + IXGBE_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + /* Disable Atlas Tx lanes; re-enabled in reset path */ + if (hw->mac.type == ixgbe_mac_82598EB) { + u8 atlas; + + ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &atlas); + atlas |= IXGBE_ATLAS_PDN_TX_REG_EN; + ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, atlas); + + ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &atlas); + atlas |= IXGBE_ATLAS_PDN_TX_10G_QL_ALL; + ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, atlas); + + ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &atlas); + atlas |= IXGBE_ATLAS_PDN_TX_1G_QL_ALL; + ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, atlas); + + ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &atlas); + atlas |= IXGBE_ATLAS_PDN_TX_AN_QL_ALL; + ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, atlas); + } + + return 0; +} + +static void ixgbe_loopback_cleanup(struct ixgbe_adapter *adapter) +{ + u32 reg_data; + + reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0); + reg_data &= ~IXGBE_HLREG0_LPBK; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data); +} + + + + + + +static int ixgbe_loopback_test(struct ixgbe_adapter *adapter, u64 *data) +{ + + //*data = ixgbe_setup_desc_rings(adapter); + //if (*data) + // goto out; + *data = ixgbe_setup_loopback_test(adapter); + if (*data) + goto err_loopback; + //*data = ixgbe_run_loopback_test(adapter); + ixgbe_loopback_cleanup(adapter); + +err_loopback: + //ixgbe_free_desc_rings(adapter); +//out: + return *data; + +} + +#ifndef HAVE_ETHTOOL_GET_SSET_COUNT +static int ixgbe_diag_test_count(struct net_device *netdev) +{ + return IXGBE_TEST_LEN; +} + +#endif /* HAVE_ETHTOOL_GET_SSET_COUNT */ +static void ixgbe_diag_test(struct net_device *netdev, + struct ethtool_test *eth_test, u64 *data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + bool if_running = netif_running(netdev); + + set_bit(__IXGBE_TESTING, &adapter->state); + if (eth_test->flags == ETH_TEST_FL_OFFLINE) { + /* Offline tests */ + + e_info(hw, "offline testing starting\n"); + + /* Link test performed before hardware reset so autoneg doesn't + * interfere with test result */ + if (ixgbe_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { + int i; + for (i = 0; i < adapter->num_vfs; i++) { + if (adapter->vfinfo[i].clear_to_send) { + e_warn(drv, "Please take active VFS " + "offline and restart the " + "adapter before running NIC " + "diagnostics\n"); + data[0] = 1; + data[1] = 1; + data[2] = 1; + data[3] = 1; + eth_test->flags |= ETH_TEST_FL_FAILED; + clear_bit(__IXGBE_TESTING, + &adapter->state); + goto skip_ol_tests; + } + } + } + + if (if_running) + /* indicate we're in test mode */ + dev_close(netdev); + else + ixgbe_reset(adapter); + + e_info(hw, "register testing starting\n"); + if (ixgbe_reg_test(adapter, &data[0])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + ixgbe_reset(adapter); + e_info(hw, "eeprom testing starting\n"); + if (ixgbe_eeprom_test(adapter, &data[1])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + ixgbe_reset(adapter); + e_info(hw, "interrupt testing starting\n"); + if (ixgbe_intr_test(adapter, &data[2])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* If SRIOV or VMDq is enabled then skip MAC + * loopback diagnostic. */ + if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED | + IXGBE_FLAG_VMDQ_ENABLED)) { + e_info(hw, "skip MAC loopback diagnostic in VT mode\n"); + data[3] = 0; + goto skip_loopback; + } + + ixgbe_reset(adapter); + e_info(hw, "loopback testing starting\n"); + if (ixgbe_loopback_test(adapter, &data[3])) + eth_test->flags |= ETH_TEST_FL_FAILED; + +skip_loopback: + ixgbe_reset(adapter); + + clear_bit(__IXGBE_TESTING, &adapter->state); + if (if_running) + dev_open(netdev); + } else { + e_info(hw, "online testing starting\n"); + /* Online tests */ + if (ixgbe_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* Online tests aren't run; pass by default */ + data[0] = 0; + data[1] = 0; + data[2] = 0; + data[3] = 0; + + clear_bit(__IXGBE_TESTING, &adapter->state); + } +skip_ol_tests: + msleep_interruptible(4 * 1000); +} + +static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter, + struct ethtool_wolinfo *wol) +{ + struct ixgbe_hw *hw = &adapter->hw; + int retval = 1; + u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK; + + /* WOL not supported except for the following */ + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_SFP: + /* Only these subdevice could supports WOL */ + switch (hw->subsystem_device_id) { + case IXGBE_SUBDEV_ID_82599_560FLR: + /* only support first port */ + if (hw->bus.func != 0) { + wol->supported = 0; + break; + } + case IXGBE_SUBDEV_ID_82599_SFP: + retval = 0; + break; + default: + wol->supported = 0; + break; + } + break; + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: + /* All except this subdevice support WOL */ + if (hw->subsystem_device_id == + IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) { + wol->supported = 0; + break; + } + retval = 0; + break; + case IXGBE_DEV_ID_82599_KX4: + retval = 0; + break; + case IXGBE_DEV_ID_X540T: + /* check eeprom to see if enabled wol */ + if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) || + ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) && + (hw->bus.func == 0))) { + retval = 0; + break; + } + + /* All others not supported */ + wol->supported = 0; + break; + default: + wol->supported = 0; + } + return retval; +} + +static void ixgbe_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_MCAST | + WAKE_BCAST | WAKE_MAGIC; + wol->wolopts = 0; + + if (ixgbe_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) + return; + + if (adapter->wol & IXGBE_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & IXGBE_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & IXGBE_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & IXGBE_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; +} + +static int ixgbe_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + + if (ixgbe_wol_exclusion(adapter, wol)) + return wol->wolopts ? -EOPNOTSUPP : 0; + + adapter->wol = 0; + + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= IXGBE_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= IXGBE_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= IXGBE_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= IXGBE_WUFC_MAG; + + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + return 0; +} + +static int ixgbe_nway_reset(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + if (netif_running(netdev)) + ixgbe_reinit_locked(adapter); + + return 0; +} + +#ifdef HAVE_ETHTOOL_SET_PHYS_ID +static int ixgbe_set_phys_id(struct net_device *netdev, + enum ethtool_phys_id_state state) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + switch (state) { + case ETHTOOL_ID_ACTIVE: + adapter->led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + return 2; + + case ETHTOOL_ID_ON: + hw->mac.ops.led_on(hw, IXGBE_LED_ON); + break; + + case ETHTOOL_ID_OFF: + hw->mac.ops.led_off(hw, IXGBE_LED_ON); + break; + + case ETHTOOL_ID_INACTIVE: + /* Restore LED settings */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, adapter->led_reg); + break; + } + + return 0; +} +#else +static int ixgbe_phys_id(struct net_device *netdev, u32 data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + u32 i; + + if (!data || data > 300) + data = 300; + + for (i = 0; i < (data * 1000); i += 400) { + ixgbe_led_on(hw, IXGBE_LED_ON); + msleep_interruptible(200); + ixgbe_led_off(hw, IXGBE_LED_ON); + msleep_interruptible(200); + } + + /* Restore LED settings */ + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + + return 0; +} +#endif /* HAVE_ETHTOOL_SET_PHYS_ID */ + +static int ixgbe_get_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + ec->tx_max_coalesced_frames_irq = adapter->tx_work_limit; +#ifndef CONFIG_IXGBE_NAPI + ec->rx_max_coalesced_frames_irq = adapter->rx_work_limit; +#endif /* CONFIG_IXGBE_NAPI */ + /* only valid if in constant ITR mode */ + if (adapter->rx_itr_setting <= 1) + ec->rx_coalesce_usecs = adapter->rx_itr_setting; + else + ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2; + + /* if in mixed tx/rx queues per vector mode, report only rx settings */ + if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count) + return 0; + + /* only valid if in constant ITR mode */ + if (adapter->tx_itr_setting <= 1) + ec->tx_coalesce_usecs = adapter->tx_itr_setting; + else + ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2; + + return 0; +} + +/* + * this function must be called before setting the new value of + * rx_itr_setting + */ +#ifdef NO_VNIC +static bool ixgbe_update_rsc(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + + /* nothing to do if LRO or RSC are not enabled */ + if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) || + !(netdev->features & NETIF_F_LRO)) + return false; + + /* check the feature flag value and enable RSC if necessary */ + if (adapter->rx_itr_setting == 1 || + adapter->rx_itr_setting > IXGBE_MIN_RSC_ITR) { + if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) { + adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; + e_info(probe, "rx-usecs value high enough " + "to re-enable RSC\n"); + return true; + } + /* if interrupt rate is too high then disable RSC */ + } else if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { + adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; +#ifdef IXGBE_NO_LRO + e_info(probe, "rx-usecs set too low, disabling RSC\n"); +#else + e_info(probe, "rx-usecs set too low, " + "falling back to software LRO\n"); +#endif + return true; + } + return false; +} +#endif + +static int ixgbe_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ +#ifdef NO_VNIC + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_q_vector *q_vector; + int i; + int num_vectors; + u16 tx_itr_param, rx_itr_param; + bool need_reset = false; + + /* don't accept tx specific changes if we've got mixed RxTx vectors */ + if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count + && ec->tx_coalesce_usecs) + return -EINVAL; + + if (ec->tx_max_coalesced_frames_irq) + adapter->tx_work_limit = ec->tx_max_coalesced_frames_irq; + +#ifndef CONFIG_IXGBE_NAPI + if (ec->rx_max_coalesced_frames_irq) + adapter->rx_work_limit = ec->rx_max_coalesced_frames_irq; + +#endif + if ((ec->rx_coalesce_usecs > (IXGBE_MAX_EITR >> 2)) || + (ec->tx_coalesce_usecs > (IXGBE_MAX_EITR >> 2))) + return -EINVAL; + + if (ec->rx_coalesce_usecs > 1) + adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2; + else + adapter->rx_itr_setting = ec->rx_coalesce_usecs; + + if (adapter->rx_itr_setting == 1) + rx_itr_param = IXGBE_20K_ITR; + else + rx_itr_param = adapter->rx_itr_setting; + + if (ec->tx_coalesce_usecs > 1) + adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2; + else + adapter->tx_itr_setting = ec->tx_coalesce_usecs; + + if (adapter->tx_itr_setting == 1) + tx_itr_param = IXGBE_10K_ITR; + else + tx_itr_param = adapter->tx_itr_setting; + + /* check the old value and enable RSC if necessary */ + need_reset = ixgbe_update_rsc(adapter); + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + num_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + else + num_vectors = 1; + + for (i = 0; i < num_vectors; i++) { + q_vector = adapter->q_vector[i]; + q_vector->tx.work_limit = adapter->tx_work_limit; + q_vector->rx.work_limit = adapter->rx_work_limit; + if (q_vector->tx.count && !q_vector->rx.count) + /* tx only */ + q_vector->itr = tx_itr_param; + else + /* rx only or mixed */ + q_vector->itr = rx_itr_param; + ixgbe_write_eitr(q_vector); + } + + /* + * do reset here at the end to make sure EITR==0 case is handled + * correctly w.r.t stopping tx, and changing TXDCTL.WTHRESH settings + * also locks in RSC enable/disable which requires reset + */ + if (need_reset) + ixgbe_do_reset(netdev); +#endif + return 0; +} + +#ifndef HAVE_NDO_SET_FEATURES +static u32 ixgbe_get_rx_csum(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_ring *ring = adapter->rx_ring[0]; + return test_bit(__IXGBE_RX_CSUM_ENABLED, &ring->state); +} + +static int ixgbe_set_rx_csum(struct net_device *netdev, u32 data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) { + struct ixgbe_ring *ring = adapter->rx_ring[i]; + if (data) + set_bit(__IXGBE_RX_CSUM_ENABLED, &ring->state); + else + clear_bit(__IXGBE_RX_CSUM_ENABLED, &ring->state); + } + + /* LRO and RSC both depend on RX checksum to function */ + if (!data && (netdev->features & NETIF_F_LRO)) { + netdev->features &= ~NETIF_F_LRO; + + if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { + adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; + ixgbe_do_reset(netdev); + } + } + + return 0; +} + +static u32 ixgbe_get_tx_csum(struct net_device *netdev) +{ + return (netdev->features & NETIF_F_IP_CSUM) != 0; +} + +static int ixgbe_set_tx_csum(struct net_device *netdev, u32 data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + u32 feature_list; + +#ifdef NETIF_F_IPV6_CSUM + feature_list = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; +#else + feature_list = NETIF_F_IP_CSUM; +#endif + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + feature_list |= NETIF_F_SCTP_CSUM; + break; + default: + break; + } + if (data) + netdev->features |= feature_list; + else + netdev->features &= ~feature_list; + + return 0; +} + +#ifdef NETIF_F_TSO +static int ixgbe_set_tso(struct net_device *netdev, u32 data) +{ + if (data) { + netdev->features |= NETIF_F_TSO; +#ifdef NETIF_F_TSO6 + netdev->features |= NETIF_F_TSO6; +#endif + } else { +#ifndef HAVE_NETDEV_VLAN_FEATURES +#ifdef NETIF_F_HW_VLAN_TX + struct ixgbe_adapter *adapter = netdev_priv(netdev); + /* disable TSO on all VLANs if they're present */ + if (adapter->vlgrp) { + int i; + struct net_device *v_netdev; + for (i = 0; i < VLAN_N_VID; i++) { + v_netdev = + vlan_group_get_device(adapter->vlgrp, i); + if (v_netdev) { + v_netdev->features &= ~NETIF_F_TSO; +#ifdef NETIF_F_TSO6 + v_netdev->features &= ~NETIF_F_TSO6; +#endif + vlan_group_set_device(adapter->vlgrp, i, + v_netdev); + } + } + } +#endif +#endif /* HAVE_NETDEV_VLAN_FEATURES */ + netdev->features &= ~NETIF_F_TSO; +#ifdef NETIF_F_TSO6 + netdev->features &= ~NETIF_F_TSO6; +#endif + } + return 0; +} + +#endif /* NETIF_F_TSO */ +#ifdef ETHTOOL_GFLAGS +static int ixgbe_set_flags(struct net_device *netdev, u32 data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + u32 supported_flags = ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN; + u32 changed = netdev->features ^ data; + bool need_reset = false; + int rc; + +#ifndef HAVE_VLAN_RX_REGISTER + if ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && + !(data & ETH_FLAG_RXVLAN)) + return -EINVAL; + +#endif +#ifdef NETIF_F_RXHASH + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) + supported_flags |= ETH_FLAG_RXHASH; +#endif +#ifdef IXGBE_NO_LRO + if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) +#endif + supported_flags |= ETH_FLAG_LRO; + +#ifdef ETHTOOL_GRXRINGS + switch (adapter->hw.mac.type) { + case ixgbe_mac_X540: + case ixgbe_mac_82599EB: + supported_flags |= ETH_FLAG_NTUPLE; + default: + break; + } + +#endif + rc = ethtool_op_set_flags(netdev, data, supported_flags); + if (rc) + return rc; + +#ifndef HAVE_VLAN_RX_REGISTER + if (changed & ETH_FLAG_RXVLAN) + ixgbe_vlan_mode(netdev, netdev->features); + +#endif + /* if state changes we need to update adapter->flags and reset */ + if (!(netdev->features & NETIF_F_LRO)) { + if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) + need_reset = true; + adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; + } else if ((adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) && + !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) { + if (adapter->rx_itr_setting == 1 || + adapter->rx_itr_setting > IXGBE_MIN_RSC_ITR) { + adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; + need_reset = true; + } else if (changed & ETH_FLAG_LRO) { +#ifdef IXGBE_NO_LRO + e_info(probe, "rx-usecs set too low, " + "disabling RSC\n"); +#else + e_info(probe, "rx-usecs set too low, " + "falling back to software LRO\n"); +#endif + } + } + +#ifdef ETHTOOL_GRXRINGS + /* + * Check if Flow Director n-tuple support was enabled or disabled. If + * the state changed, we need to reset. + */ + if (!(netdev->features & NETIF_F_NTUPLE)) { + if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) { + /* turn off Flow Director, set ATR and reset */ + if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) && + !(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) + adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; + need_reset = true; + } + adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE; + } else if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) { + /* turn off ATR, enable perfect filters and reset */ + adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; + adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE; + need_reset = true; + } + +#endif /* ETHTOOL_GRXRINGS */ + if (need_reset) + ixgbe_do_reset(netdev); + + return 0; +} + +#endif /* ETHTOOL_GFLAGS */ +#endif /* HAVE_NDO_SET_FEATURES */ +#ifdef ETHTOOL_GRXRINGS +static int ixgbe_get_ethtool_fdir_entry(struct ixgbe_adapter *adapter, + struct ethtool_rxnfc *cmd) +{ + union ixgbe_atr_input *mask = &adapter->fdir_mask; + struct ethtool_rx_flow_spec *fsp = + (struct ethtool_rx_flow_spec *)&cmd->fs; + struct hlist_node *node, *node2; + struct ixgbe_fdir_filter *rule = NULL; + + /* report total rule count */ + cmd->data = (1024 << adapter->fdir_pballoc) - 2; + + hlist_for_each_entry_safe(rule, node, node2, + &adapter->fdir_filter_list, fdir_node) { + if (fsp->location <= rule->sw_idx) + break; + } + + if (!rule || fsp->location != rule->sw_idx) + return -EINVAL; + + /* fill out the flow spec entry */ + + /* set flow type field */ + switch (rule->filter.formatted.flow_type) { + case IXGBE_ATR_FLOW_TYPE_TCPV4: + fsp->flow_type = TCP_V4_FLOW; + break; + case IXGBE_ATR_FLOW_TYPE_UDPV4: + fsp->flow_type = UDP_V4_FLOW; + break; + case IXGBE_ATR_FLOW_TYPE_SCTPV4: + fsp->flow_type = SCTP_V4_FLOW; + break; + case IXGBE_ATR_FLOW_TYPE_IPV4: + fsp->flow_type = IP_USER_FLOW; + fsp->h_u.usr_ip4_spec.ip_ver = ETH_RX_NFC_IP4; + fsp->h_u.usr_ip4_spec.proto = 0; + fsp->m_u.usr_ip4_spec.proto = 0; + break; + default: + return -EINVAL; + } + + fsp->h_u.tcp_ip4_spec.psrc = rule->filter.formatted.src_port; + fsp->m_u.tcp_ip4_spec.psrc = mask->formatted.src_port; + fsp->h_u.tcp_ip4_spec.pdst = rule->filter.formatted.dst_port; + fsp->m_u.tcp_ip4_spec.pdst = mask->formatted.dst_port; + fsp->h_u.tcp_ip4_spec.ip4src = rule->filter.formatted.src_ip[0]; + fsp->m_u.tcp_ip4_spec.ip4src = mask->formatted.src_ip[0]; + fsp->h_u.tcp_ip4_spec.ip4dst = rule->filter.formatted.dst_ip[0]; + fsp->m_u.tcp_ip4_spec.ip4dst = mask->formatted.dst_ip[0]; + fsp->h_ext.vlan_tci = rule->filter.formatted.vlan_id; + fsp->m_ext.vlan_tci = mask->formatted.vlan_id; + fsp->h_ext.vlan_etype = rule->filter.formatted.flex_bytes; + fsp->m_ext.vlan_etype = mask->formatted.flex_bytes; + fsp->h_ext.data[1] = htonl(rule->filter.formatted.vm_pool); + fsp->m_ext.data[1] = htonl(mask->formatted.vm_pool); + fsp->flow_type |= FLOW_EXT; + + /* record action */ + if (rule->action == IXGBE_FDIR_DROP_QUEUE) + fsp->ring_cookie = RX_CLS_FLOW_DISC; + else + fsp->ring_cookie = rule->action; + + return 0; +} + +static int ixgbe_get_ethtool_fdir_all(struct ixgbe_adapter *adapter, + struct ethtool_rxnfc *cmd, + u32 *rule_locs) +{ + struct hlist_node *node, *node2; + struct ixgbe_fdir_filter *rule; + int cnt = 0; + + /* report total rule count */ + cmd->data = (1024 << adapter->fdir_pballoc) - 2; + + hlist_for_each_entry_safe(rule, node, node2, + &adapter->fdir_filter_list, fdir_node) { + if (cnt == cmd->rule_cnt) + return -EMSGSIZE; + rule_locs[cnt] = rule->sw_idx; + cnt++; + } + + cmd->rule_cnt = cnt; + + return 0; +} + +static int ixgbe_get_rss_hash_opts(struct ixgbe_adapter *adapter, + struct ethtool_rxnfc *cmd) +{ + cmd->data = 0; + + /* if RSS is disabled then report no hashing */ + if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) + return 0; + + /* Report default options for RSS on ixgbe */ + switch (cmd->flow_type) { + case TCP_V4_FLOW: + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + case UDP_V4_FLOW: + if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV4_UDP) + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + case SCTP_V4_FLOW: + case AH_ESP_V4_FLOW: + case AH_V4_FLOW: + case ESP_V4_FLOW: + case IPV4_FLOW: + cmd->data |= RXH_IP_SRC | RXH_IP_DST; + break; + case TCP_V6_FLOW: + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + case UDP_V6_FLOW: + if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV6_UDP) + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + case SCTP_V6_FLOW: + case AH_ESP_V6_FLOW: + case AH_V6_FLOW: + case ESP_V6_FLOW: + case IPV6_FLOW: + cmd->data |= RXH_IP_SRC | RXH_IP_DST; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd, +#ifdef HAVE_ETHTOOL_GET_RXNFC_VOID_RULE_LOCS + void *rule_locs) +#else + u32 *rule_locs) +#endif +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + switch (cmd->cmd) { + case ETHTOOL_GRXRINGS: + cmd->data = adapter->num_rx_queues; + ret = 0; + break; + case ETHTOOL_GRXCLSRLCNT: + cmd->rule_cnt = adapter->fdir_filter_count; + ret = 0; + break; + case ETHTOOL_GRXCLSRULE: + ret = ixgbe_get_ethtool_fdir_entry(adapter, cmd); + break; + case ETHTOOL_GRXCLSRLALL: + ret = ixgbe_get_ethtool_fdir_all(adapter, cmd, + rule_locs); + break; + case ETHTOOL_GRXFH: + ret = ixgbe_get_rss_hash_opts(adapter, cmd); + break; + default: + break; + } + + return ret; +} + +static int ixgbe_update_ethtool_fdir_entry(struct ixgbe_adapter *adapter, + struct ixgbe_fdir_filter *input, + u16 sw_idx) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct hlist_node *node, *node2, *parent; + struct ixgbe_fdir_filter *rule; + int err = -EINVAL; + + parent = NULL; + rule = NULL; + + hlist_for_each_entry_safe(rule, node, node2, + &adapter->fdir_filter_list, fdir_node) { + /* hash found, or no matching entry */ + if (rule->sw_idx >= sw_idx) + break; + parent = node; + } + + /* if there is an old rule occupying our place remove it */ + if (rule && (rule->sw_idx == sw_idx)) { + if (!input || (rule->filter.formatted.bkt_hash != + input->filter.formatted.bkt_hash)) { + err = ixgbe_fdir_erase_perfect_filter_82599(hw, + &rule->filter, + sw_idx); + } + + hlist_del(&rule->fdir_node); + kfree(rule); + adapter->fdir_filter_count--; + } + + /* + * If no input this was a delete, err should be 0 if a rule was + * successfully found and removed from the list else -EINVAL + */ + if (!input) + return err; + + /* initialize node and set software index */ + INIT_HLIST_NODE(&input->fdir_node); + + /* add filter to the list */ + if (parent) + hlist_add_after(parent, &input->fdir_node); + else + hlist_add_head(&input->fdir_node, + &adapter->fdir_filter_list); + + /* update counts */ + adapter->fdir_filter_count++; + + return 0; +} + +static int ixgbe_flowspec_to_flow_type(struct ethtool_rx_flow_spec *fsp, + u8 *flow_type) +{ + switch (fsp->flow_type & ~FLOW_EXT) { + case TCP_V4_FLOW: + *flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4; + break; + case UDP_V4_FLOW: + *flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4; + break; + case SCTP_V4_FLOW: + *flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4; + break; + case IP_USER_FLOW: + switch (fsp->h_u.usr_ip4_spec.proto) { + case IPPROTO_TCP: + *flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4; + break; + case IPPROTO_UDP: + *flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4; + break; + case IPPROTO_SCTP: + *flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4; + break; + case 0: + if (!fsp->m_u.usr_ip4_spec.proto) { + *flow_type = IXGBE_ATR_FLOW_TYPE_IPV4; + break; + } + default: + return 0; + } + break; + default: + return 0; + } + + return 1; +} + +static int ixgbe_add_ethtool_fdir_entry(struct ixgbe_adapter *adapter, + struct ethtool_rxnfc *cmd) +{ + struct ethtool_rx_flow_spec *fsp = + (struct ethtool_rx_flow_spec *)&cmd->fs; + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_fdir_filter *input; + union ixgbe_atr_input mask; + int err; + + if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) + return -EOPNOTSUPP; + + /* + * Don't allow programming if the action is a queue greater than + * the number of online Rx queues. + */ + if ((fsp->ring_cookie != RX_CLS_FLOW_DISC) && + (fsp->ring_cookie >= adapter->num_rx_queues)) + return -EINVAL; + + /* Don't allow indexes to exist outside of available space */ + if (fsp->location >= ((1024 << adapter->fdir_pballoc) - 2)) { + e_err(drv, "Location out of range\n"); + return -EINVAL; + } + + input = kzalloc(sizeof(*input), GFP_ATOMIC); + if (!input) + return -ENOMEM; + + memset(&mask, 0, sizeof(union ixgbe_atr_input)); + + /* set SW index */ + input->sw_idx = fsp->location; + + /* record flow type */ + if (!ixgbe_flowspec_to_flow_type(fsp, + &input->filter.formatted.flow_type)) { + e_err(drv, "Unrecognized flow type\n"); + goto err_out; + } + + mask.formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK | + IXGBE_ATR_L4TYPE_MASK; + + if (input->filter.formatted.flow_type == IXGBE_ATR_FLOW_TYPE_IPV4) + mask.formatted.flow_type &= IXGBE_ATR_L4TYPE_IPV6_MASK; + + /* Copy input into formatted structures */ + input->filter.formatted.src_ip[0] = fsp->h_u.tcp_ip4_spec.ip4src; + mask.formatted.src_ip[0] = fsp->m_u.tcp_ip4_spec.ip4src; + input->filter.formatted.dst_ip[0] = fsp->h_u.tcp_ip4_spec.ip4dst; + mask.formatted.dst_ip[0] = fsp->m_u.tcp_ip4_spec.ip4dst; + input->filter.formatted.src_port = fsp->h_u.tcp_ip4_spec.psrc; + mask.formatted.src_port = fsp->m_u.tcp_ip4_spec.psrc; + input->filter.formatted.dst_port = fsp->h_u.tcp_ip4_spec.pdst; + mask.formatted.dst_port = fsp->m_u.tcp_ip4_spec.pdst; + + if (fsp->flow_type & FLOW_EXT) { + input->filter.formatted.vm_pool = + (unsigned char)ntohl(fsp->h_ext.data[1]); + mask.formatted.vm_pool = + (unsigned char)ntohl(fsp->m_ext.data[1]); + input->filter.formatted.vlan_id = fsp->h_ext.vlan_tci; + mask.formatted.vlan_id = fsp->m_ext.vlan_tci; + input->filter.formatted.flex_bytes = + fsp->h_ext.vlan_etype; + mask.formatted.flex_bytes = fsp->m_ext.vlan_etype; + } + + /* determine if we need to drop or route the packet */ + if (fsp->ring_cookie == RX_CLS_FLOW_DISC) + input->action = IXGBE_FDIR_DROP_QUEUE; + else + input->action = fsp->ring_cookie; + + spin_lock(&adapter->fdir_perfect_lock); + + if (hlist_empty(&adapter->fdir_filter_list)) { + /* save mask and program input mask into HW */ + memcpy(&adapter->fdir_mask, &mask, sizeof(mask)); + err = ixgbe_fdir_set_input_mask_82599(hw, &mask); + if (err) { + e_err(drv, "Error writing mask\n"); + goto err_out_w_lock; + } + } else if (memcmp(&adapter->fdir_mask, &mask, sizeof(mask))) { + e_err(drv, "Only one mask supported per port\n"); + goto err_out_w_lock; + } + + /* apply mask and compute/store hash */ + ixgbe_atr_compute_perfect_hash_82599(&input->filter, &mask); + + /* program filters to filter memory */ + err = ixgbe_fdir_write_perfect_filter_82599(hw, + &input->filter, input->sw_idx, + (input->action == IXGBE_FDIR_DROP_QUEUE) ? + IXGBE_FDIR_DROP_QUEUE : + adapter->rx_ring[input->action]->reg_idx); + if (err) + goto err_out_w_lock; + + ixgbe_update_ethtool_fdir_entry(adapter, input, input->sw_idx); + + spin_unlock(&adapter->fdir_perfect_lock); + + kfree(input); + return err; +err_out_w_lock: + spin_unlock(&adapter->fdir_perfect_lock); +err_out: + kfree(input); + return -EINVAL; +} + +static int ixgbe_del_ethtool_fdir_entry(struct ixgbe_adapter *adapter, + struct ethtool_rxnfc *cmd) +{ + struct ethtool_rx_flow_spec *fsp = + (struct ethtool_rx_flow_spec *)&cmd->fs; + int err; + + spin_lock(&adapter->fdir_perfect_lock); + err = ixgbe_update_ethtool_fdir_entry(adapter, NULL, (u16)(fsp->location)); + spin_unlock(&adapter->fdir_perfect_lock); + + return err; +} + +#ifdef ETHTOOL_SRXNTUPLE +/* + * We need to keep this around for kernels 2.6.33 - 2.6.39 in order to avoid + * a null pointer dereference as it was assumend if the NETIF_F_NTUPLE flag + * was defined that this function was present. + */ +static int ixgbe_set_rx_ntuple(struct net_device *dev, + struct ethtool_rx_ntuple *cmd) +{ + return -EOPNOTSUPP; +} + +#endif +#define UDP_RSS_FLAGS (IXGBE_FLAG2_RSS_FIELD_IPV4_UDP | \ + IXGBE_FLAG2_RSS_FIELD_IPV6_UDP) +static int ixgbe_set_rss_hash_opt(struct ixgbe_adapter *adapter, + struct ethtool_rxnfc *nfc) +{ + u32 flags2 = adapter->flags2; + + /* + * RSS does not support anything other than hashing + * to queues on src and dst IPs and ports + */ + if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3)) + return -EINVAL; + + switch (nfc->flow_type) { + case TCP_V4_FLOW: + case TCP_V6_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST) || + !(nfc->data & RXH_L4_B_0_1) || + !(nfc->data & RXH_L4_B_2_3)) + return -EINVAL; + break; + case UDP_V4_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST)) + return -EINVAL; + switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) { + case 0: + flags2 &= ~IXGBE_FLAG2_RSS_FIELD_IPV4_UDP; + break; + case (RXH_L4_B_0_1 | RXH_L4_B_2_3): + flags2 |= IXGBE_FLAG2_RSS_FIELD_IPV4_UDP; + break; + default: + return -EINVAL; + } + break; + case UDP_V6_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST)) + return -EINVAL; + switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) { + case 0: + flags2 &= ~IXGBE_FLAG2_RSS_FIELD_IPV6_UDP; + break; + case (RXH_L4_B_0_1 | RXH_L4_B_2_3): + flags2 |= IXGBE_FLAG2_RSS_FIELD_IPV6_UDP; + break; + default: + return -EINVAL; + } + break; + case AH_ESP_V4_FLOW: + case AH_V4_FLOW: + case ESP_V4_FLOW: + case SCTP_V4_FLOW: + case AH_ESP_V6_FLOW: + case AH_V6_FLOW: + case ESP_V6_FLOW: + case SCTP_V6_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST) || + (nfc->data & RXH_L4_B_0_1) || + (nfc->data & RXH_L4_B_2_3)) + return -EINVAL; + break; + default: + return -EINVAL; + } + + /* if we changed something we need to update flags */ + if (flags2 != adapter->flags2) { + struct ixgbe_hw *hw = &adapter->hw; + u32 mrqc = IXGBE_READ_REG(hw, IXGBE_MRQC); + + if ((flags2 & UDP_RSS_FLAGS) && + !(adapter->flags2 & UDP_RSS_FLAGS)) + e_warn(drv, "enabling UDP RSS: fragmented packets" + " may arrive out of order to the stack above\n"); + + adapter->flags2 = flags2; + + /* Perform hash on these packet types */ + mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4 + | IXGBE_MRQC_RSS_FIELD_IPV4_TCP + | IXGBE_MRQC_RSS_FIELD_IPV6 + | IXGBE_MRQC_RSS_FIELD_IPV6_TCP; + + mrqc &= ~(IXGBE_MRQC_RSS_FIELD_IPV4_UDP | + IXGBE_MRQC_RSS_FIELD_IPV6_UDP); + + if (flags2 & IXGBE_FLAG2_RSS_FIELD_IPV4_UDP) + mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4_UDP; + + if (flags2 & IXGBE_FLAG2_RSS_FIELD_IPV6_UDP) + mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_UDP; + + IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); + } + + return 0; +} + +static int ixgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + switch (cmd->cmd) { + case ETHTOOL_SRXCLSRLINS: + ret = ixgbe_add_ethtool_fdir_entry(adapter, cmd); + break; + case ETHTOOL_SRXCLSRLDEL: + ret = ixgbe_del_ethtool_fdir_entry(adapter, cmd); + break; + case ETHTOOL_SRXFH: + ret = ixgbe_set_rss_hash_opt(adapter, cmd); + break; + default: + break; + } + + return ret; +} + +#endif /* ETHTOOL_GRXRINGS */ +//static +struct ethtool_ops ixgbe_ethtool_ops = { + .get_settings = ixgbe_get_settings, + .set_settings = ixgbe_set_settings, + .get_drvinfo = ixgbe_get_drvinfo, + .get_regs_len = ixgbe_get_regs_len, + .get_regs = ixgbe_get_regs, + .get_wol = ixgbe_get_wol, + .set_wol = ixgbe_set_wol, + .nway_reset = ixgbe_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = ixgbe_get_eeprom_len, + .get_eeprom = ixgbe_get_eeprom, + .set_eeprom = ixgbe_set_eeprom, + .get_ringparam = ixgbe_get_ringparam, + .set_ringparam = ixgbe_set_ringparam, + .get_pauseparam = ixgbe_get_pauseparam, + .set_pauseparam = ixgbe_set_pauseparam, + .get_msglevel = ixgbe_get_msglevel, + .set_msglevel = ixgbe_set_msglevel, +#ifndef HAVE_ETHTOOL_GET_SSET_COUNT + .self_test_count = ixgbe_diag_test_count, +#endif /* HAVE_ETHTOOL_GET_SSET_COUNT */ + .self_test = ixgbe_diag_test, + .get_strings = ixgbe_get_strings, +#ifdef HAVE_ETHTOOL_SET_PHYS_ID + .set_phys_id = ixgbe_set_phys_id, +#else + .phys_id = ixgbe_phys_id, +#endif /* HAVE_ETHTOOL_SET_PHYS_ID */ +#ifndef HAVE_ETHTOOL_GET_SSET_COUNT + .get_stats_count = ixgbe_get_stats_count, +#else /* HAVE_ETHTOOL_GET_SSET_COUNT */ + .get_sset_count = ixgbe_get_sset_count, +#endif /* HAVE_ETHTOOL_GET_SSET_COUNT */ + .get_ethtool_stats = ixgbe_get_ethtool_stats, +#ifdef HAVE_ETHTOOL_GET_PERM_ADDR + .get_perm_addr = ethtool_op_get_perm_addr, +#endif + .get_coalesce = ixgbe_get_coalesce, + .set_coalesce = ixgbe_set_coalesce, +#ifndef HAVE_NDO_SET_FEATURES + .get_rx_csum = ixgbe_get_rx_csum, + .set_rx_csum = ixgbe_set_rx_csum, + .get_tx_csum = ixgbe_get_tx_csum, + .set_tx_csum = ixgbe_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, +#ifdef NETIF_F_TSO + .get_tso = ethtool_op_get_tso, + .set_tso = ixgbe_set_tso, +#endif +#ifdef ETHTOOL_GFLAGS + .get_flags = ethtool_op_get_flags, + .set_flags = ixgbe_set_flags, +#endif +#endif /* HAVE_NDO_SET_FEATURES */ +#ifdef ETHTOOL_GRXRINGS + .get_rxnfc = ixgbe_get_rxnfc, + .set_rxnfc = ixgbe_set_rxnfc, +#ifdef ETHTOOL_SRXNTUPLE + .set_rx_ntuple = ixgbe_set_rx_ntuple, +#endif +#endif +}; + +void ixgbe_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &ixgbe_ethtool_ops); +} +#endif /* SIOCETHTOOL */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_fcoe.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_fcoe.h new file mode 100644 index 00000000..eec86cbb --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_fcoe.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_FCOE_H +#define _IXGBE_FCOE_H + +#ifdef IXGBE_FCOE + +#include <scsi/fc/fc_fs.h> +#include <scsi/fc/fc_fcoe.h> + +/* shift bits within STAT fo FCSTAT */ +#define IXGBE_RXDADV_FCSTAT_SHIFT 4 + +/* ddp user buffer */ +#define IXGBE_BUFFCNT_MAX 256 /* 8 bits bufcnt */ +#define IXGBE_FCPTR_ALIGN 16 +#define IXGBE_FCPTR_MAX (IXGBE_BUFFCNT_MAX * sizeof(dma_addr_t)) +#define IXGBE_FCBUFF_4KB 0x0 +#define IXGBE_FCBUFF_8KB 0x1 +#define IXGBE_FCBUFF_16KB 0x2 +#define IXGBE_FCBUFF_64KB 0x3 +#define IXGBE_FCBUFF_MAX 65536 /* 64KB max */ +#define IXGBE_FCBUFF_MIN 4096 /* 4KB min */ +#define IXGBE_FCOE_DDP_MAX 512 /* 9 bits xid */ + +/* Default traffic class to use for FCoE */ +#define IXGBE_FCOE_DEFTC 3 + +/* fcerr */ +#define IXGBE_FCERR_BADCRC 0x00100000 +#define IXGBE_FCERR_EOFSOF 0x00200000 +#define IXGBE_FCERR_NOFIRST 0x00300000 +#define IXGBE_FCERR_OOOSEQ 0x00400000 +#define IXGBE_FCERR_NODMA 0x00500000 +#define IXGBE_FCERR_PKTLOST 0x00600000 + +/* FCoE DDP for target mode */ +#define __IXGBE_FCOE_TARGET 1 + +struct ixgbe_fcoe_ddp { + int len; + u32 err; + unsigned int sgc; + struct scatterlist *sgl; + dma_addr_t udp; + u64 *udl; + struct pci_pool *pool; +}; + +struct ixgbe_fcoe { + struct pci_pool **pool; + atomic_t refcnt; + spinlock_t lock; + struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX]; + unsigned char *extra_ddp_buffer; + dma_addr_t extra_ddp_buffer_dma; + u64 __percpu *pcpu_noddp; + u64 __percpu *pcpu_noddp_ext_buff; + unsigned long mode; + u8 tc; + u8 up; + u8 up_set; +}; +#endif /* IXGBE_FCOE */ + +#endif /* _IXGBE_FCOE_H */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_main.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_main.c new file mode 100644 index 00000000..a5acf19c --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_main.c @@ -0,0 +1,2951 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/****************************************************************************** + Copyright (c)2006 - 2007 Myricom, Inc. for some LRO specific code +******************************************************************************/ +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/vmalloc.h> +#include <linux/highmem.h> +#include <linux/string.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#ifdef HAVE_SCTP +#include <linux/sctp.h> +#endif +#include <linux/pkt_sched.h> +#include <linux/ipv6.h> +#ifdef NETIF_F_TSO +#include <net/checksum.h> +#ifdef NETIF_F_TSO6 +#include <net/ip6_checksum.h> +#endif +#endif +#ifdef SIOCETHTOOL +#include <linux/ethtool.h> +#endif + +#include "ixgbe.h" + +#undef CONFIG_DCA +#undef CONFIG_DCA_MODULE + +char ixgbe_driver_name[] = "ixgbe"; +#define DRV_HW_PERF + +#ifndef CONFIG_IXGBE_NAPI +#define DRIVERNAPI +#else +#define DRIVERNAPI "-NAPI" +#endif + +#define FPGA + +#define VMDQ_TAG + +#define MAJ 3 +#define MIN 9 +#define BUILD 17 +#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ + __stringify(BUILD) DRIVERNAPI DRV_HW_PERF FPGA VMDQ_TAG +const char ixgbe_driver_version[] = DRV_VERSION; + +/* ixgbe_pci_tbl - PCI Device ID Table + * + * Wildcard entries (PCI_ANY_ID) should come last + * Last entry must be all 0s + * + * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, + * Class, Class Mask, private data (not used) } + */ +const struct pci_device_id ixgbe_pci_tbl[] = { + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT2)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_DA_DUAL_PORT)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_XF_LR)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_BX)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_XAUI_LOM)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KR)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_EM)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_BACKPLANE_FCOE)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_FCOE)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP)}, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_QSFP_SF_QP)}, + /* required last entry */ + {0, } +}; + +#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) +static int ixgbe_notify_dca(struct notifier_block *, unsigned long event, + void *p); +static struct notifier_block dca_notifier = { + .notifier_call = ixgbe_notify_dca, + .next = NULL, + .priority = 0 +}; + +#endif +MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); +MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +#define DEFAULT_DEBUG_LEVEL_SHIFT 3 + + +static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter) +{ + u32 ctrl_ext; + + /* Let firmware take over control of h/w */ + ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, + ctrl_ext & ~IXGBE_CTRL_EXT_DRV_LOAD); +} + +#ifdef NO_VNIC +static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter) +{ + u32 ctrl_ext; + + /* Let firmware know the driver has taken over */ + ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, + ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD); +} +#endif + + +static void ixgbe_update_xoff_rx_lfc(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_hw_stats *hwstats = &adapter->stats; + int i; + u32 data; + + if ((hw->fc.current_mode != ixgbe_fc_full) && + (hw->fc.current_mode != ixgbe_fc_rx_pause)) + return; + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); + break; + default: + data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); + } + hwstats->lxoffrxc += data; + + /* refill credits (no tx hang) if we received xoff */ + if (!data) + return; + + for (i = 0; i < adapter->num_tx_queues; i++) + clear_bit(__IXGBE_HANG_CHECK_ARMED, + &adapter->tx_ring[i]->state); +} + +static void ixgbe_update_xoff_received(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_hw_stats *hwstats = &adapter->stats; + u32 xoff[8] = {0}; + int i; + bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; + +#ifdef HAVE_DCBNL_IEEE + if (adapter->ixgbe_ieee_pfc) + pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); + +#endif + if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED) || !pfc_en) { + ixgbe_update_xoff_rx_lfc(adapter); + return; + } + + /* update stats for each tc, only valid with PFC enabled */ + for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) { + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); + break; + default: + xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); + } + hwstats->pxoffrxc[i] += xoff[i]; + } + + /* disarm tx queues that have received xoff frames */ + for (i = 0; i < adapter->num_tx_queues; i++) { + struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; + u8 tc = tx_ring->dcb_tc; + + if ((tc <= 7) && (xoff[tc])) + clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state); + } +} + + + + +#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 + + + + +#ifdef HAVE_8021P_SUPPORT +/** + * ixgbe_vlan_stripping_disable - helper to disable vlan tag stripping + * @adapter: driver data + */ +void ixgbe_vlan_stripping_disable(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 vlnctrl; + int i; + + /* leave vlan tag stripping enabled for DCB */ + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) + return; + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + vlnctrl &= ~IXGBE_VLNCTRL_VME; + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + for (i = 0; i < adapter->num_rx_queues; i++) { + u8 reg_idx = adapter->rx_ring[i]->reg_idx; + vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); + vlnctrl &= ~IXGBE_RXDCTL_VME; + IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), vlnctrl); + } + break; + default: + break; + } +} + +#endif +/** + * ixgbe_vlan_stripping_enable - helper to enable vlan tag stripping + * @adapter: driver data + */ +void ixgbe_vlan_stripping_enable(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 vlnctrl; + int i; + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + vlnctrl |= IXGBE_VLNCTRL_VME; + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + for (i = 0; i < adapter->num_rx_queues; i++) { + u8 reg_idx = adapter->rx_ring[i]->reg_idx; + vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); + vlnctrl |= IXGBE_RXDCTL_VME; + IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), vlnctrl); + } + break; + default: + break; + } +} + +#ifdef HAVE_VLAN_RX_REGISTER +void ixgbe_vlan_mode(struct net_device *netdev, struct vlan_group *grp) +#else +void ixgbe_vlan_mode(struct net_device *netdev, u32 features) +#endif +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); +#ifdef HAVE_8021P_SUPPORT + bool enable; +#endif +#ifdef HAVE_VLAN_RX_REGISTER + + //if (!test_bit(__IXGBE_DOWN, &adapter->state)) + // ixgbe_irq_disable(adapter); + + adapter->vlgrp = grp; + + //if (!test_bit(__IXGBE_DOWN, &adapter->state)) + // ixgbe_irq_enable(adapter, true, true); +#endif +#ifdef HAVE_8021P_SUPPORT +#ifdef HAVE_VLAN_RX_REGISTER + enable = (grp || (adapter->flags & IXGBE_FLAG_DCB_ENABLED)); +#else + enable = !!(features & NETIF_F_HW_VLAN_RX); +#endif + if (enable) + /* enable VLAN tag insert/strip */ + ixgbe_vlan_stripping_enable(adapter); + else + /* disable VLAN tag insert/strip */ + ixgbe_vlan_stripping_disable(adapter); + +#endif +} + +static u8 *ixgbe_addr_list_itr(struct ixgbe_hw *hw, u8 **mc_addr_ptr, u32 *vmdq) +{ +#ifdef NETDEV_HW_ADDR_T_MULTICAST + struct netdev_hw_addr *mc_ptr; +#else + struct dev_mc_list *mc_ptr; +#endif + struct ixgbe_adapter *adapter = hw->back; + u8 *addr = *mc_addr_ptr; + + *vmdq = adapter->num_vfs; + +#ifdef NETDEV_HW_ADDR_T_MULTICAST + mc_ptr = container_of(addr, struct netdev_hw_addr, addr[0]); + if (mc_ptr->list.next) { + struct netdev_hw_addr *ha; + + ha = list_entry(mc_ptr->list.next, struct netdev_hw_addr, list); + *mc_addr_ptr = ha->addr; + } +#else + mc_ptr = container_of(addr, struct dev_mc_list, dmi_addr[0]); + if (mc_ptr->next) + *mc_addr_ptr = mc_ptr->next->dmi_addr; +#endif + else + *mc_addr_ptr = NULL; + + return addr; +} + +/** + * ixgbe_write_mc_addr_list - write multicast addresses to MTA + * @netdev: network interface device structure + * + * Writes multicast address list to the MTA hash table. + * Returns: -ENOMEM on failure + * 0 on no addresses written + * X on writing X addresses to MTA + **/ +int ixgbe_write_mc_addr_list(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; +#ifdef NETDEV_HW_ADDR_T_MULTICAST + struct netdev_hw_addr *ha; +#endif + u8 *addr_list = NULL; + int addr_count = 0; + + if (!hw->mac.ops.update_mc_addr_list) + return -ENOMEM; + + if (!netif_running(netdev)) + return 0; + + + hw->mac.ops.update_mc_addr_list(hw, NULL, 0, + ixgbe_addr_list_itr, true); + + if (!netdev_mc_empty(netdev)) { +#ifdef NETDEV_HW_ADDR_T_MULTICAST + ha = list_first_entry(&netdev->mc.list, + struct netdev_hw_addr, list); + addr_list = ha->addr; +#else + addr_list = netdev->mc_list->dmi_addr; +#endif + addr_count = netdev_mc_count(netdev); + + hw->mac.ops.update_mc_addr_list(hw, addr_list, addr_count, + ixgbe_addr_list_itr, false); + } + +#ifdef CONFIG_PCI_IOV + //ixgbe_restore_vf_multicasts(adapter); +#endif + return addr_count; +} + + +void ixgbe_full_sync_mac_table(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int i; + for (i = 0; i < hw->mac.num_rar_entries; i++) { + if (adapter->mac_table[i].state & IXGBE_MAC_STATE_IN_USE) { + hw->mac.ops.set_rar(hw, i, adapter->mac_table[i].addr, + adapter->mac_table[i].queue, + IXGBE_RAH_AV); + } else { + hw->mac.ops.clear_rar(hw, i); + } + } +} + +void ixgbe_sync_mac_table(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int i; + for (i = 0; i < hw->mac.num_rar_entries; i++) { + if (adapter->mac_table[i].state & IXGBE_MAC_STATE_MODIFIED) { + if (adapter->mac_table[i].state & + IXGBE_MAC_STATE_IN_USE) { + hw->mac.ops.set_rar(hw, i, + adapter->mac_table[i].addr, + adapter->mac_table[i].queue, + IXGBE_RAH_AV); + } else { + hw->mac.ops.clear_rar(hw, i); + } + adapter->mac_table[i].state &= + ~(IXGBE_MAC_STATE_MODIFIED); + } + } +} + +int ixgbe_available_rars(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int i, count = 0; + + for (i = 0; i < hw->mac.num_rar_entries; i++) { + if (adapter->mac_table[i].state == 0) + count++; + } + return count; +} + +int ixgbe_add_mac_filter(struct ixgbe_adapter *adapter, u8 *addr, u16 queue) +{ + struct ixgbe_hw *hw = &adapter->hw; + int i; + + if (is_zero_ether_addr(addr)) + return 0; + + for (i = 0; i < hw->mac.num_rar_entries; i++) { + if (adapter->mac_table[i].state & IXGBE_MAC_STATE_IN_USE) + continue; + adapter->mac_table[i].state |= (IXGBE_MAC_STATE_MODIFIED | + IXGBE_MAC_STATE_IN_USE); + memcpy(adapter->mac_table[i].addr, addr, ETH_ALEN); + adapter->mac_table[i].queue = queue; + ixgbe_sync_mac_table(adapter); + return i; + } + return -ENOMEM; +} + +void ixgbe_flush_sw_mac_table(struct ixgbe_adapter *adapter) +{ + int i; + struct ixgbe_hw *hw = &adapter->hw; + + for (i = 0; i < hw->mac.num_rar_entries; i++) { + adapter->mac_table[i].state |= IXGBE_MAC_STATE_MODIFIED; + adapter->mac_table[i].state &= ~IXGBE_MAC_STATE_IN_USE; + memset(adapter->mac_table[i].addr, 0, ETH_ALEN); + adapter->mac_table[i].queue = 0; + } + ixgbe_sync_mac_table(adapter); +} + +void ixgbe_del_mac_filter_by_index(struct ixgbe_adapter *adapter, int index) +{ + adapter->mac_table[index].state |= IXGBE_MAC_STATE_MODIFIED; + adapter->mac_table[index].state &= ~IXGBE_MAC_STATE_IN_USE; + memset(adapter->mac_table[index].addr, 0, ETH_ALEN); + adapter->mac_table[index].queue = 0; + ixgbe_sync_mac_table(adapter); +} + +int ixgbe_del_mac_filter(struct ixgbe_adapter *adapter, u8* addr, u16 queue) +{ + /* search table for addr, if found, set to 0 and sync */ + int i; + struct ixgbe_hw *hw = &adapter->hw; + + if (is_zero_ether_addr(addr)) + return 0; + for (i = 0; i < hw->mac.num_rar_entries; i++) { + if (ether_addr_equal(addr, adapter->mac_table[i].addr) && + adapter->mac_table[i].queue == queue) { + adapter->mac_table[i].state |= IXGBE_MAC_STATE_MODIFIED; + adapter->mac_table[i].state &= ~IXGBE_MAC_STATE_IN_USE; + memset(adapter->mac_table[i].addr, 0, ETH_ALEN); + adapter->mac_table[i].queue = 0; + ixgbe_sync_mac_table(adapter); + return 0; + } + } + return -ENOMEM; +} +#ifdef HAVE_SET_RX_MODE +/** + * ixgbe_write_uc_addr_list - write unicast addresses to RAR table + * @netdev: network interface device structure + * + * Writes unicast address list to the RAR table. + * Returns: -ENOMEM on failure/insufficient address space + * 0 on no addresses written + * X on writing X addresses to the RAR table + **/ +int ixgbe_write_uc_addr_list(struct ixgbe_adapter *adapter, + struct net_device *netdev, unsigned int vfn) +{ + int count = 0; + + /* return ENOMEM indicating insufficient memory for addresses */ + if (netdev_uc_count(netdev) > ixgbe_available_rars(adapter)) + return -ENOMEM; + + if (!netdev_uc_empty(netdev)) { +#ifdef NETDEV_HW_ADDR_T_UNICAST + struct netdev_hw_addr *ha; +#else + struct dev_mc_list *ha; +#endif + netdev_for_each_uc_addr(ha, netdev) { +#ifdef NETDEV_HW_ADDR_T_UNICAST + ixgbe_del_mac_filter(adapter, ha->addr, (u16)vfn); + ixgbe_add_mac_filter(adapter, ha->addr, (u16)vfn); +#else + ixgbe_del_mac_filter(adapter, ha->da_addr, (u16)vfn); + ixgbe_add_mac_filter(adapter, ha->da_addr, (u16)vfn); +#endif + count++; + } + } + return count; +} + +#endif +/** + * ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_rx_method entry point is called whenever the unicast/multicast + * address list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper unicast, multicast and + * promiscuous mode. + **/ +void ixgbe_set_rx_mode(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE; + u32 vlnctrl; + int count; + + /* Check for Promiscuous and All Multicast modes */ + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + + /* set all bits that we expect to always be set */ + fctrl |= IXGBE_FCTRL_BAM; + fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */ + fctrl |= IXGBE_FCTRL_PMCF; + + /* clear the bits we are changing the status of */ + fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); + vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); + + if (netdev->flags & IFF_PROMISC) { + hw->addr_ctrl.user_set_promisc = true; + fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); + vmolr |= IXGBE_VMOLR_MPE; + } else { + if (netdev->flags & IFF_ALLMULTI) { + fctrl |= IXGBE_FCTRL_MPE; + vmolr |= IXGBE_VMOLR_MPE; + } else { + /* + * Write addresses to the MTA, if the attempt fails + * then we should just turn on promiscuous mode so + * that we can at least receive multicast traffic + */ + count = ixgbe_write_mc_addr_list(netdev); + if (count < 0) { + fctrl |= IXGBE_FCTRL_MPE; + vmolr |= IXGBE_VMOLR_MPE; + } else if (count) { + vmolr |= IXGBE_VMOLR_ROMPE; + } + } +#ifdef NETIF_F_HW_VLAN_TX + /* enable hardware vlan filtering */ + vlnctrl |= IXGBE_VLNCTRL_VFE; +#endif + hw->addr_ctrl.user_set_promisc = false; +#ifdef HAVE_SET_RX_MODE + /* + * Write addresses to available RAR registers, if there is not + * sufficient space to store all the addresses then enable + * unicast promiscuous mode + */ + count = ixgbe_write_uc_addr_list(adapter, netdev, + adapter->num_vfs); + if (count < 0) { + fctrl |= IXGBE_FCTRL_UPE; + vmolr |= IXGBE_VMOLR_ROPE; + } +#endif + } + + if (hw->mac.type != ixgbe_mac_82598EB) { + vmolr |= IXGBE_READ_REG(hw, IXGBE_VMOLR(adapter->num_vfs)) & + ~(IXGBE_VMOLR_MPE | IXGBE_VMOLR_ROMPE | + IXGBE_VMOLR_ROPE); + IXGBE_WRITE_REG(hw, IXGBE_VMOLR(adapter->num_vfs), vmolr); + } + + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); +} + + + + + + + + +/* Additional bittime to account for IXGBE framing */ +#define IXGBE_ETH_FRAMING 20 + +/* + * ixgbe_hpbthresh - calculate high water mark for flow control + * + * @adapter: board private structure to calculate for + * @pb - packet buffer to calculate + */ +static int ixgbe_hpbthresh(struct ixgbe_adapter *adapter, int pb) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct net_device *dev = adapter->netdev; + int link, tc, kb, marker; + u32 dv_id, rx_pba; + + /* Calculate max LAN frame size */ + tc = link = dev->mtu + ETH_HLEN + ETH_FCS_LEN + IXGBE_ETH_FRAMING; + +#ifdef IXGBE_FCOE + /* FCoE traffic class uses FCOE jumbo frames */ + if (dev->features & NETIF_F_FCOE_MTU) { + int fcoe_pb = 0; + + fcoe_pb = netdev_get_prio_tc_map(dev, adapter->fcoe.up); + + if (fcoe_pb == pb && tc < IXGBE_FCOE_JUMBO_FRAME_SIZE) + tc = IXGBE_FCOE_JUMBO_FRAME_SIZE; + } +#endif + + /* Calculate delay value for device */ + switch (hw->mac.type) { + case ixgbe_mac_X540: + dv_id = IXGBE_DV_X540(link, tc); + break; + default: + dv_id = IXGBE_DV(link, tc); + break; + } + + /* Loopback switch introduces additional latency */ + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + dv_id += IXGBE_B2BT(tc); + + /* Delay value is calculated in bit times convert to KB */ + kb = IXGBE_BT2KB(dv_id); + rx_pba = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(pb)) >> 10; + + marker = rx_pba - kb; + + /* It is possible that the packet buffer is not large enough + * to provide required headroom. In this case throw an error + * to user and a do the best we can. + */ + if (marker < 0) { + e_warn(drv, "Packet Buffer(%i) can not provide enough" + "headroom to suppport flow control." + "Decrease MTU or number of traffic classes\n", pb); + marker = tc + 1; + } + + return marker; +} + +/* + * ixgbe_lpbthresh - calculate low water mark for for flow control + * + * @adapter: board private structure to calculate for + * @pb - packet buffer to calculate + */ +static int ixgbe_lpbthresh(struct ixgbe_adapter *adapter, int pb) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct net_device *dev = adapter->netdev; + int tc; + u32 dv_id; + + /* Calculate max LAN frame size */ + tc = dev->mtu + ETH_HLEN + ETH_FCS_LEN; + +#ifdef IXGBE_FCOE + /* FCoE traffic class uses FCOE jumbo frames */ + if (dev->features & NETIF_F_FCOE_MTU) { + int fcoe_pb = 0; + + fcoe_pb = netdev_get_prio_tc_map(dev, adapter->fcoe.up); + + if (fcoe_pb == pb && tc < IXGBE_FCOE_JUMBO_FRAME_SIZE) + tc = IXGBE_FCOE_JUMBO_FRAME_SIZE; + } +#endif + + /* Calculate delay value for device */ + switch (hw->mac.type) { + case ixgbe_mac_X540: + dv_id = IXGBE_LOW_DV_X540(tc); + break; + default: + dv_id = IXGBE_LOW_DV(tc); + break; + } + + /* Delay value is calculated in bit times convert to KB */ + return IXGBE_BT2KB(dv_id); +} + +/* + * ixgbe_pbthresh_setup - calculate and setup high low water marks + */ +static void ixgbe_pbthresh_setup(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int num_tc = netdev_get_num_tc(adapter->netdev); + int i; + + if (!num_tc) + num_tc = 1; + if (num_tc > IXGBE_DCB_MAX_TRAFFIC_CLASS) + num_tc = IXGBE_DCB_MAX_TRAFFIC_CLASS; + + for (i = 0; i < num_tc; i++) { + hw->fc.high_water[i] = ixgbe_hpbthresh(adapter, i); + hw->fc.low_water[i] = ixgbe_lpbthresh(adapter, i); + + /* Low water marks must not be larger than high water marks */ + if (hw->fc.low_water[i] > hw->fc.high_water[i]) + hw->fc.low_water[i] = 0; + } + + for (; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) + hw->fc.high_water[i] = 0; +} + + + +#ifdef NO_VNIC +static void ixgbe_configure(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + + ixgbe_configure_pb(adapter); + ixgbe_configure_dcb(adapter); + + ixgbe_set_rx_mode(adapter->netdev); +#ifdef NETIF_F_HW_VLAN_TX + ixgbe_restore_vlan(adapter); +#endif + +#ifdef IXGBE_FCOE + if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) + ixgbe_configure_fcoe(adapter); + +#endif /* IXGBE_FCOE */ + + if (adapter->hw.mac.type != ixgbe_mac_82598EB) + hw->mac.ops.disable_sec_rx_path(hw); + + if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { + ixgbe_init_fdir_signature_82599(&adapter->hw, + adapter->fdir_pballoc); + } else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) { + ixgbe_init_fdir_perfect_82599(&adapter->hw, + adapter->fdir_pballoc); + ixgbe_fdir_filter_restore(adapter); + } + + if (adapter->hw.mac.type != ixgbe_mac_82598EB) + hw->mac.ops.enable_sec_rx_path(hw); + + ixgbe_configure_virtualization(adapter); + + ixgbe_configure_tx(adapter); + ixgbe_configure_rx(adapter); +} +#endif + +static bool ixgbe_is_sfp(struct ixgbe_hw *hw) +{ + switch (hw->phy.type) { + case ixgbe_phy_sfp_avago: + case ixgbe_phy_sfp_ftl: + case ixgbe_phy_sfp_intel: + case ixgbe_phy_sfp_unknown: + case ixgbe_phy_sfp_passive_tyco: + case ixgbe_phy_sfp_passive_unknown: + case ixgbe_phy_sfp_active_unknown: + case ixgbe_phy_sfp_ftl_active: + return true; + case ixgbe_phy_nl: + if (hw->mac.type == ixgbe_mac_82598EB) + return true; + default: + return false; + } +} + + +/** + * ixgbe_clear_vf_stats_counters - Clear out VF stats after reset + * @adapter: board private structure + * + * On a reset we need to clear out the VF stats or accounting gets + * messed up because they're not clear on read. + **/ +void ixgbe_clear_vf_stats_counters(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int i; + + for (i = 0; i < adapter->num_vfs; i++) { + adapter->vfinfo[i].last_vfstats.gprc = + IXGBE_READ_REG(hw, IXGBE_PVFGPRC(i)); + adapter->vfinfo[i].saved_rst_vfstats.gprc += + adapter->vfinfo[i].vfstats.gprc; + adapter->vfinfo[i].vfstats.gprc = 0; + adapter->vfinfo[i].last_vfstats.gptc = + IXGBE_READ_REG(hw, IXGBE_PVFGPTC(i)); + adapter->vfinfo[i].saved_rst_vfstats.gptc += + adapter->vfinfo[i].vfstats.gptc; + adapter->vfinfo[i].vfstats.gptc = 0; + adapter->vfinfo[i].last_vfstats.gorc = + IXGBE_READ_REG(hw, IXGBE_PVFGORC_LSB(i)); + adapter->vfinfo[i].saved_rst_vfstats.gorc += + adapter->vfinfo[i].vfstats.gorc; + adapter->vfinfo[i].vfstats.gorc = 0; + adapter->vfinfo[i].last_vfstats.gotc = + IXGBE_READ_REG(hw, IXGBE_PVFGOTC_LSB(i)); + adapter->vfinfo[i].saved_rst_vfstats.gotc += + adapter->vfinfo[i].vfstats.gotc; + adapter->vfinfo[i].vfstats.gotc = 0; + adapter->vfinfo[i].last_vfstats.mprc = + IXGBE_READ_REG(hw, IXGBE_PVFMPRC(i)); + adapter->vfinfo[i].saved_rst_vfstats.mprc += + adapter->vfinfo[i].vfstats.mprc; + adapter->vfinfo[i].vfstats.mprc = 0; + } +} + + + +void ixgbe_reinit_locked(struct ixgbe_adapter *adapter) +{ +#ifdef NO_VNIC + WARN_ON(in_interrupt()); + /* put off any impending NetWatchDogTimeout */ + adapter->netdev->trans_start = jiffies; + + while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + ixgbe_down(adapter); + /* + * If SR-IOV enabled then wait a bit before bringing the adapter + * back up to give the VFs time to respond to the reset. The + * two second wait is based upon the watchdog timer cycle in + * the VF driver. + */ + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + msleep(2000); + ixgbe_up(adapter); + clear_bit(__IXGBE_RESETTING, &adapter->state); +#endif +} + +void ixgbe_up(struct ixgbe_adapter *adapter) +{ + /* hardware has been reset, we need to reload some things */ + //ixgbe_configure(adapter); + + //ixgbe_up_complete(adapter); +} + +void ixgbe_reset(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + int err; + + /* lock SFP init bit to prevent race conditions with the watchdog */ + while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + usleep_range(1000, 2000); + + /* clear all SFP and link config related flags while holding SFP_INIT */ + adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP | + IXGBE_FLAG2_SFP_NEEDS_RESET); + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; + + err = hw->mac.ops.init_hw(hw); + switch (err) { + case 0: + case IXGBE_ERR_SFP_NOT_PRESENT: + case IXGBE_ERR_SFP_NOT_SUPPORTED: + break; + case IXGBE_ERR_MASTER_REQUESTS_PENDING: + e_dev_err("master disable timed out\n"); + break; + case IXGBE_ERR_EEPROM_VERSION: + /* We are running on a pre-production device, log a warning */ + e_dev_warn("This device is a pre-production adapter/LOM. " + "Please be aware there may be issues associated " + "with your hardware. If you are experiencing " + "problems please contact your Intel or hardware " + "representative who provided you with this " + "hardware.\n"); + break; + default: + e_dev_err("Hardware Error: %d\n", err); + } + + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); + + ixgbe_flush_sw_mac_table(adapter); + memcpy(&adapter->mac_table[0].addr, hw->mac.perm_addr, + netdev->addr_len); + adapter->mac_table[0].queue = adapter->num_vfs; + adapter->mac_table[0].state = (IXGBE_MAC_STATE_DEFAULT | + IXGBE_MAC_STATE_IN_USE); + hw->mac.ops.set_rar(hw, 0, adapter->mac_table[0].addr, + adapter->mac_table[0].queue, + IXGBE_RAH_AV); +} + + + + + + +void ixgbe_down(struct ixgbe_adapter *adapter) +{ +#ifdef NO_VNIC + struct net_device *netdev = adapter->netdev; + struct ixgbe_hw *hw = &adapter->hw; + u32 rxctrl; + int i; + + /* signal that we are down to the interrupt handler */ + set_bit(__IXGBE_DOWN, &adapter->state); + + /* disable receives */ + rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN); + + /* disable all enabled rx queues */ + for (i = 0; i < adapter->num_rx_queues; i++) + /* this call also flushes the previous write */ + ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]); + + usleep_range(10000, 20000); + + netif_tx_stop_all_queues(netdev); + + /* call carrier off first to avoid false dev_watchdog timeouts */ + netif_carrier_off(netdev); + netif_tx_disable(netdev); + + ixgbe_irq_disable(adapter); + + ixgbe_napi_disable_all(adapter); + + adapter->flags2 &= ~(IXGBE_FLAG2_FDIR_REQUIRES_REINIT | + IXGBE_FLAG2_RESET_REQUESTED); + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; + + del_timer_sync(&adapter->service_timer); + + if (adapter->num_vfs) { + /* Clear EITR Select mapping */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0); + + /* Mark all the VFs as inactive */ + for (i = 0 ; i < adapter->num_vfs; i++) + adapter->vfinfo[i].clear_to_send = 0; + + /* ping all the active vfs to let them know we are going down */ + ixgbe_ping_all_vfs(adapter); + + /* Disable all VFTE/VFRE TX/RX */ + ixgbe_disable_tx_rx(adapter); + } + + /* disable transmits in the hardware now that interrupts are off */ + for (i = 0; i < adapter->num_tx_queues; i++) { + u8 reg_idx = adapter->tx_ring[i]->reg_idx; + IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH); + } + + /* Disable the Tx DMA engine on 82599 and X540 */ + switch (hw->mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, + (IXGBE_READ_REG(hw, IXGBE_DMATXCTL) & + ~IXGBE_DMATXCTL_TE)); + break; + default: + break; + } + +#ifdef HAVE_PCI_ERS + if (!pci_channel_offline(adapter->pdev)) +#endif + ixgbe_reset(adapter); + /* power down the optics */ + if ((hw->phy.multispeed_fiber) || + ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) && + (hw->mac.type == ixgbe_mac_82599EB))) + ixgbe_disable_tx_laser(hw); + + ixgbe_clean_all_tx_rings(adapter); + ixgbe_clean_all_rx_rings(adapter); + +#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) + /* since we reset the hardware DCA settings were cleared */ + ixgbe_setup_dca(adapter); +#endif + +#endif /* NO_VNIC */ +} + +#ifndef NO_VNIC + +#undef IXGBE_FCOE + +/* Artificial max queue cap per traffic class in DCB mode */ +#define DCB_QUEUE_CAP 8 + +/** + * ixgbe_set_dcb_queues: Allocate queues for a DCB-enabled device + * @adapter: board private structure to initialize + * + * When DCB (Data Center Bridging) is enabled, allocate queues for + * each traffic class. If multiqueue isn't available,then abort DCB + * initialization. + * + * This function handles all combinations of DCB, RSS, and FCoE. + * + **/ +static bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter) +{ + int tcs; +#ifdef HAVE_MQPRIO + int rss_i, i, offset = 0; + struct net_device *dev = adapter->netdev; + + /* Map queue offset and counts onto allocated tx queues */ + tcs = netdev_get_num_tc(dev); + + if (!tcs) + return false; + + rss_i = min_t(int, dev->num_tx_queues / tcs, num_online_cpus()); + + if (rss_i > DCB_QUEUE_CAP) + rss_i = DCB_QUEUE_CAP; + + for (i = 0; i < tcs; i++) { + netdev_set_tc_queue(dev, i, rss_i, offset); + offset += rss_i; + } + + adapter->num_tx_queues = rss_i * tcs; + adapter->num_rx_queues = rss_i * tcs; + +#ifdef IXGBE_FCOE + /* FCoE enabled queues require special configuration indexed + * by feature specific indices and mask. Here we map FCoE + * indices onto the DCB queue pairs allowing FCoE to own + * configuration later. + */ + + if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { + struct ixgbe_ring_feature *f; + int tc; + u8 prio_tc[IXGBE_DCB_MAX_USER_PRIORITY] = {0}; + + ixgbe_dcb_unpack_map_cee(&adapter->dcb_cfg, + IXGBE_DCB_TX_CONFIG, + prio_tc); + tc = prio_tc[adapter->fcoe.up]; + + f = &adapter->ring_feature[RING_F_FCOE]; + f->indices = min_t(int, rss_i, f->indices); + f->mask = rss_i * tc; + } +#endif /* IXGBE_FCOE */ +#else + if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) + return false; + + /* Enable one Queue per traffic class */ + tcs = adapter->tc; + if (!tcs) + return false; + +#ifdef IXGBE_FCOE + if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { + struct ixgbe_ring_feature *f; + int tc = netdev_get_prio_tc_map(adapter->netdev, + adapter->fcoe.up); + + f = &adapter->ring_feature[RING_F_FCOE]; + + /* + * We have max 8 queues for FCoE, where 8 the is + * FCoE redirection table size. We must also share + * ring resources with network traffic so if FCoE TC is + * 4 or greater and we are in 8 TC mode we can only use + * 7 queues. + */ + if ((tcs > 4) && (tc >= 4) && (f->indices > 7)) + f->indices = 7; + + f->indices = min_t(int, num_online_cpus(), f->indices); + f->mask = tcs; + + adapter->num_rx_queues = f->indices + tcs; + adapter->num_tx_queues = f->indices + tcs; + + return true; + } + +#endif /* IXGBE_FCOE */ + adapter->num_rx_queues = tcs; + adapter->num_tx_queues = tcs; +#endif /* HAVE_MQ */ + + return true; +} + +/** + * ixgbe_set_vmdq_queues: Allocate queues for VMDq devices + * @adapter: board private structure to initialize + * + * When VMDq (Virtual Machine Devices queue) is enabled, allocate queues + * and VM pools where appropriate. If RSS is available, then also try and + * enable RSS and map accordingly. + * + **/ +static bool ixgbe_set_vmdq_queues(struct ixgbe_adapter *adapter) +{ + int vmdq_i = adapter->ring_feature[RING_F_VMDQ].indices; + int vmdq_m = 0; + int rss_i = adapter->ring_feature[RING_F_RSS].indices; + unsigned long i; + int rss_shift; + bool ret = false; + + + switch (adapter->flags & (IXGBE_FLAG_RSS_ENABLED + | IXGBE_FLAG_DCB_ENABLED + | IXGBE_FLAG_VMDQ_ENABLED)) { + + case (IXGBE_FLAG_RSS_ENABLED | IXGBE_FLAG_VMDQ_ENABLED): + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + vmdq_i = min((int)IXGBE_MAX_VMDQ_INDICES, vmdq_i); + if (vmdq_i > 32) + rss_i = 2; + else + rss_i = 4; + i = rss_i; + rss_shift = find_first_bit(&i, sizeof(i) * 8); + vmdq_m = ((IXGBE_MAX_VMDQ_INDICES - 1) << + rss_shift) & (MAX_RX_QUEUES - 1); + break; + default: + break; + } + adapter->num_rx_queues = vmdq_i * rss_i; + adapter->num_tx_queues = min((int)MAX_TX_QUEUES, vmdq_i * rss_i); + ret = true; + break; + + case (IXGBE_FLAG_VMDQ_ENABLED): + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: + vmdq_m = (IXGBE_MAX_VMDQ_INDICES - 1); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + vmdq_m = (IXGBE_MAX_VMDQ_INDICES - 1) << 1; + break; + default: + break; + } + adapter->num_rx_queues = vmdq_i; + adapter->num_tx_queues = vmdq_i; + ret = true; + break; + + default: + ret = false; + goto vmdq_queues_out; + } + + if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) { + adapter->num_rx_pools = vmdq_i; + adapter->num_rx_queues_per_pool = adapter->num_rx_queues / + vmdq_i; + } else { + adapter->num_rx_pools = adapter->num_rx_queues; + adapter->num_rx_queues_per_pool = 1; + } + /* save the mask for later use */ + adapter->ring_feature[RING_F_VMDQ].mask = vmdq_m; +vmdq_queues_out: + return ret; +} + +/** + * ixgbe_set_rss_queues: Allocate queues for RSS + * @adapter: board private structure to initialize + * + * This is our "base" multiqueue mode. RSS (Receive Side Scaling) will try + * to allocate one Rx queue per CPU, and if available, one Tx queue per CPU. + * + **/ +static bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter) +{ + struct ixgbe_ring_feature *f; + + if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) { + adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; + return false; + } + + /* set mask for 16 queue limit of RSS */ + f = &adapter->ring_feature[RING_F_RSS]; + f->mask = 0xF; + + /* + * Use Flow Director in addition to RSS to ensure the best + * distribution of flows across cores, even when an FDIR flow + * isn't matched. + */ + if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { + f = &adapter->ring_feature[RING_F_FDIR]; + + f->indices = min_t(int, num_online_cpus(), f->indices); + f->mask = 0; + } + + adapter->num_rx_queues = f->indices; +#ifdef HAVE_TX_MQ + adapter->num_tx_queues = f->indices; +#endif + + return true; +} + +#ifdef IXGBE_FCOE +/** + * ixgbe_set_fcoe_queues: Allocate queues for Fiber Channel over Ethernet (FCoE) + * @adapter: board private structure to initialize + * + * FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges. + * The ring feature mask is not used as a mask for FCoE, as it can take any 8 + * rx queues out of the max number of rx queues, instead, it is used as the + * index of the first rx queue used by FCoE. + * + **/ +static bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter) +{ + struct ixgbe_ring_feature *f; + + if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) + return false; + + ixgbe_set_rss_queues(adapter); + + f = &adapter->ring_feature[RING_F_FCOE]; + f->indices = min_t(int, num_online_cpus(), f->indices); + + /* adding FCoE queues */ + f->mask = adapter->num_rx_queues; + adapter->num_rx_queues += f->indices; + adapter->num_tx_queues += f->indices; + + return true; +} + +#endif /* IXGBE_FCOE */ +/* + * ixgbe_set_num_queues: Allocate queues for device, feature dependent + * @adapter: board private structure to initialize + * + * This is the top level queue allocation routine. The order here is very + * important, starting with the "most" number of features turned on at once, + * and ending with the smallest set of features. This way large combinations + * can be allocated if they're turned on, and smaller combinations are the + * fallthrough conditions. + * + **/ +static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter) +{ + /* Start with base case */ + adapter->num_rx_queues = 1; + adapter->num_tx_queues = 1; + adapter->num_rx_pools = adapter->num_rx_queues; + adapter->num_rx_queues_per_pool = 1; + + if (ixgbe_set_vmdq_queues(adapter)) + return; + + if (ixgbe_set_dcb_queues(adapter)) + return; + +#ifdef IXGBE_FCOE + if (ixgbe_set_fcoe_queues(adapter)) + return; + +#endif /* IXGBE_FCOE */ + ixgbe_set_rss_queues(adapter); +} + +#endif + + +/** + * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter) + * @adapter: board private structure to initialize + * + * ixgbe_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + **/ +static int ixgbe_sw_init(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + int err; + + /* PCI config space info */ + + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id); + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_device_id = pdev->subsystem_device; + + err = ixgbe_init_shared_code(hw); + if (err) { + e_err(probe, "init_shared_code failed: %d\n", err); + goto out; + } + adapter->mac_table = kzalloc(sizeof(struct ixgbe_mac_addr) * + hw->mac.num_rar_entries, + GFP_ATOMIC); + /* Set capability flags */ + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + adapter->flags |= IXGBE_FLAG_MSI_CAPABLE | + IXGBE_FLAG_MSIX_CAPABLE | + IXGBE_FLAG_MQ_CAPABLE | + IXGBE_FLAG_RSS_CAPABLE; + adapter->flags |= IXGBE_FLAG_DCB_CAPABLE; +#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) + adapter->flags |= IXGBE_FLAG_DCA_CAPABLE; +#endif + adapter->flags &= ~IXGBE_FLAG_SRIOV_CAPABLE; + adapter->flags2 &= ~IXGBE_FLAG2_RSC_CAPABLE; + + if (hw->device_id == IXGBE_DEV_ID_82598AT) + adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE; + + adapter->max_msix_q_vectors = IXGBE_MAX_MSIX_Q_VECTORS_82598; + break; + case ixgbe_mac_X540: + adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; + case ixgbe_mac_82599EB: + adapter->flags |= IXGBE_FLAG_MSI_CAPABLE | + IXGBE_FLAG_MSIX_CAPABLE | + IXGBE_FLAG_MQ_CAPABLE | + IXGBE_FLAG_RSS_CAPABLE; + adapter->flags |= IXGBE_FLAG_DCB_CAPABLE; +#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE) + adapter->flags |= IXGBE_FLAG_DCA_CAPABLE; +#endif + adapter->flags |= IXGBE_FLAG_SRIOV_CAPABLE; + adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; +#ifdef IXGBE_FCOE + adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE; + adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; + adapter->ring_feature[RING_F_FCOE].indices = 0; +#ifdef CONFIG_DCB + /* Default traffic class to use for FCoE */ + adapter->fcoe.tc = IXGBE_FCOE_DEFTC; + adapter->fcoe.up = IXGBE_FCOE_DEFTC; + adapter->fcoe.up_set = IXGBE_FCOE_DEFTC; +#endif +#endif + if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM) + adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; +#ifndef IXGBE_NO_SMART_SPEED + hw->phy.smart_speed = ixgbe_smart_speed_on; +#else + hw->phy.smart_speed = ixgbe_smart_speed_off; +#endif + adapter->max_msix_q_vectors = IXGBE_MAX_MSIX_Q_VECTORS_82599; + default: + break; + } + + /* n-tuple support exists, always init our spinlock */ + //spin_lock_init(&adapter->fdir_perfect_lock); + + if (adapter->flags & IXGBE_FLAG_DCB_CAPABLE) { + int j; + struct ixgbe_dcb_tc_config *tc; + int dcb_i = IXGBE_DCB_MAX_TRAFFIC_CLASS; + + + adapter->dcb_cfg.num_tcs.pg_tcs = dcb_i; + adapter->dcb_cfg.num_tcs.pfc_tcs = dcb_i; + for (j = 0; j < dcb_i; j++) { + tc = &adapter->dcb_cfg.tc_config[j]; + tc->path[IXGBE_DCB_TX_CONFIG].bwg_id = 0; + tc->path[IXGBE_DCB_TX_CONFIG].bwg_percent = 100 / dcb_i; + tc->path[IXGBE_DCB_RX_CONFIG].bwg_id = 0; + tc->path[IXGBE_DCB_RX_CONFIG].bwg_percent = 100 / dcb_i; + tc->pfc = ixgbe_dcb_pfc_disabled; + if (j == 0) { + /* total of all TCs bandwidth needs to be 100 */ + tc->path[IXGBE_DCB_TX_CONFIG].bwg_percent += + 100 % dcb_i; + tc->path[IXGBE_DCB_RX_CONFIG].bwg_percent += + 100 % dcb_i; + } + } + + /* Initialize default user to priority mapping, UPx->TC0 */ + tc = &adapter->dcb_cfg.tc_config[0]; + tc->path[IXGBE_DCB_TX_CONFIG].up_to_tc_bitmap = 0xFF; + tc->path[IXGBE_DCB_RX_CONFIG].up_to_tc_bitmap = 0xFF; + + adapter->dcb_cfg.bw_percentage[IXGBE_DCB_TX_CONFIG][0] = 100; + adapter->dcb_cfg.bw_percentage[IXGBE_DCB_RX_CONFIG][0] = 100; + adapter->dcb_cfg.rx_pba_cfg = ixgbe_dcb_pba_equal; + adapter->dcb_cfg.pfc_mode_enable = false; + adapter->dcb_cfg.round_robin_enable = false; + adapter->dcb_set_bitmap = 0x00; +#ifdef CONFIG_DCB + adapter->dcbx_cap = DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_CEE; +#endif /* CONFIG_DCB */ + + if (hw->mac.type == ixgbe_mac_X540) { + adapter->dcb_cfg.num_tcs.pg_tcs = 4; + adapter->dcb_cfg.num_tcs.pfc_tcs = 4; + } + } +#ifdef CONFIG_DCB + /* XXX does this need to be initialized even w/o DCB? */ + //memcpy(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, + // sizeof(adapter->temp_dcb_cfg)); + +#endif + //if (hw->mac.type == ixgbe_mac_82599EB || + // hw->mac.type == ixgbe_mac_X540) + // hw->mbx.ops.init_params(hw); + + /* default flow control settings */ + hw->fc.requested_mode = ixgbe_fc_full; + hw->fc.current_mode = ixgbe_fc_full; /* init for ethtool output */ + + adapter->last_lfc_mode = hw->fc.current_mode; + ixgbe_pbthresh_setup(adapter); + hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; + hw->fc.send_xon = true; + hw->fc.disable_fc_autoneg = false; + + /* set default ring sizes */ + adapter->tx_ring_count = IXGBE_DEFAULT_TXD; + adapter->rx_ring_count = IXGBE_DEFAULT_RXD; + + /* set default work limits */ + adapter->tx_work_limit = IXGBE_DEFAULT_TX_WORK; + adapter->rx_work_limit = IXGBE_DEFAULT_RX_WORK; + + set_bit(__IXGBE_DOWN, &adapter->state); +out: + return err; +} + +/** + * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors) + * @tx_ring: tx descriptor ring (for a specific queue) to setup + * + * Return 0 on success, negative on failure + **/ +int ixgbe_setup_tx_resources(struct ixgbe_ring *tx_ring) +{ + struct device *dev = tx_ring->dev; + //int orig_node = dev_to_node(dev); + int numa_node = -1; + int size; + + size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; + + if (tx_ring->q_vector) + numa_node = tx_ring->q_vector->numa_node; + + tx_ring->tx_buffer_info = vzalloc_node(size, numa_node); + if (!tx_ring->tx_buffer_info) + tx_ring->tx_buffer_info = vzalloc(size); + if (!tx_ring->tx_buffer_info) + goto err; + + /* round up to nearest 4K */ + tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc); + tx_ring->size = ALIGN(tx_ring->size, 4096); + + //set_dev_node(dev, numa_node); + //tx_ring->desc = dma_alloc_coherent(dev, + // tx_ring->size, + // &tx_ring->dma, + // GFP_KERNEL); + //set_dev_node(dev, orig_node); + //if (!tx_ring->desc) + // tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, + // &tx_ring->dma, GFP_KERNEL); + //if (!tx_ring->desc) + // goto err; + + return 0; + +err: + vfree(tx_ring->tx_buffer_info); + tx_ring->tx_buffer_info = NULL; + dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n"); + return -ENOMEM; +} + +/** + * ixgbe_setup_all_tx_resources - allocate all queues Tx resources + * @adapter: board private structure + * + * If this function returns with an error, then it's possible one or + * more of the rings is populated (while the rest are not). It is the + * callers duty to clean those orphaned rings. + * + * Return 0 on success, negative on failure + **/ +static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter) +{ + int i, err = 0; + + for (i = 0; i < adapter->num_tx_queues; i++) { + err = ixgbe_setup_tx_resources(adapter->tx_ring[i]); + if (!err) + continue; + e_err(probe, "Allocation for Tx Queue %u failed\n", i); + break; + } + + return err; +} + +/** + * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors) + * @rx_ring: rx descriptor ring (for a specific queue) to setup + * + * Returns 0 on success, negative on failure + **/ +int ixgbe_setup_rx_resources(struct ixgbe_ring *rx_ring) +{ + struct device *dev = rx_ring->dev; + //int orig_node = dev_to_node(dev); + int numa_node = -1; + int size; + + size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; + + if (rx_ring->q_vector) + numa_node = rx_ring->q_vector->numa_node; + + rx_ring->rx_buffer_info = vzalloc_node(size, numa_node); + if (!rx_ring->rx_buffer_info) + rx_ring->rx_buffer_info = vzalloc(size); + if (!rx_ring->rx_buffer_info) + goto err; + + /* Round up to nearest 4K */ + rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc); + rx_ring->size = ALIGN(rx_ring->size, 4096); + +#ifdef NO_VNIC + set_dev_node(dev, numa_node); + rx_ring->desc = dma_alloc_coherent(dev, + rx_ring->size, + &rx_ring->dma, + GFP_KERNEL); + set_dev_node(dev, orig_node); + if (!rx_ring->desc) + rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, + &rx_ring->dma, GFP_KERNEL); + if (!rx_ring->desc) + goto err; + +#ifndef CONFIG_IXGBE_DISABLE_PACKET_SPLIT + ixgbe_init_rx_page_offset(rx_ring); + +#endif + +#endif /* NO_VNIC */ + return 0; +err: + vfree(rx_ring->rx_buffer_info); + rx_ring->rx_buffer_info = NULL; + dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n"); + return -ENOMEM; +} + +/** + * ixgbe_setup_all_rx_resources - allocate all queues Rx resources + * @adapter: board private structure + * + * If this function returns with an error, then it's possible one or + * more of the rings is populated (while the rest are not). It is the + * callers duty to clean those orphaned rings. + * + * Return 0 on success, negative on failure + **/ +static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter) +{ + int i, err = 0; + + for (i = 0; i < adapter->num_rx_queues; i++) { + err = ixgbe_setup_rx_resources(adapter->rx_ring[i]); + if (!err) + continue; + e_err(probe, "Allocation for Rx Queue %u failed\n", i); + break; + } + + return err; +} + +/** + * ixgbe_free_tx_resources - Free Tx Resources per Queue + * @tx_ring: Tx descriptor ring for a specific queue + * + * Free all transmit software resources + **/ +void ixgbe_free_tx_resources(struct ixgbe_ring *tx_ring) +{ + //ixgbe_clean_tx_ring(tx_ring); + + vfree(tx_ring->tx_buffer_info); + tx_ring->tx_buffer_info = NULL; + + /* if not set, then don't free */ + if (!tx_ring->desc) + return; + + //dma_free_coherent(tx_ring->dev, tx_ring->size, + // tx_ring->desc, tx_ring->dma); + + tx_ring->desc = NULL; +} + +/** + * ixgbe_free_all_tx_resources - Free Tx Resources for All Queues + * @adapter: board private structure + * + * Free all transmit software resources + **/ +static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + if (adapter->tx_ring[i]->desc) + ixgbe_free_tx_resources(adapter->tx_ring[i]); +} + +/** + * ixgbe_free_rx_resources - Free Rx Resources + * @rx_ring: ring to clean the resources from + * + * Free all receive software resources + **/ +void ixgbe_free_rx_resources(struct ixgbe_ring *rx_ring) +{ + //ixgbe_clean_rx_ring(rx_ring); + + vfree(rx_ring->rx_buffer_info); + rx_ring->rx_buffer_info = NULL; + + /* if not set, then don't free */ + if (!rx_ring->desc) + return; + + //dma_free_coherent(rx_ring->dev, rx_ring->size, + // rx_ring->desc, rx_ring->dma); + + rx_ring->desc = NULL; +} + +/** + * ixgbe_free_all_rx_resources - Free Rx Resources for All Queues + * @adapter: board private structure + * + * Free all receive software resources + **/ +static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) + if (adapter->rx_ring[i]->desc) + ixgbe_free_rx_resources(adapter->rx_ring[i]); +} + + +/** + * ixgbe_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + **/ +//static +int ixgbe_open(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + int err; + + /* disallow open during test */ + if (test_bit(__IXGBE_TESTING, &adapter->state)) + return -EBUSY; + + netif_carrier_off(netdev); + + /* allocate transmit descriptors */ + err = ixgbe_setup_all_tx_resources(adapter); + if (err) + goto err_setup_tx; + + /* allocate receive descriptors */ + err = ixgbe_setup_all_rx_resources(adapter); + if (err) + goto err_setup_rx; + +#ifdef NO_VNIC + ixgbe_configure(adapter); + + err = ixgbe_request_irq(adapter); + if (err) + goto err_req_irq; + + ixgbe_up_complete(adapter); + +err_req_irq: +#else + return 0; +#endif +err_setup_rx: + ixgbe_free_all_rx_resources(adapter); +err_setup_tx: + ixgbe_free_all_tx_resources(adapter); + ixgbe_reset(adapter); + + return err; +} + +/** + * ixgbe_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +//static +int ixgbe_close(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + //ixgbe_down(adapter); + //ixgbe_free_irq(adapter); + + //ixgbe_fdir_filter_exit(adapter); + + //ixgbe_free_all_tx_resources(adapter); + //ixgbe_free_all_rx_resources(adapter); + + ixgbe_release_hw_control(adapter); + + return 0; +} + + + + + +/** + * ixgbe_get_stats - Get System Network Statistics + * @netdev: network interface device structure + * + * Returns the address of the device statistics structure. + * The statistics are actually updated from the timer callback. + **/ +//static +struct net_device_stats *ixgbe_get_stats(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + /* update the stats data */ + ixgbe_update_stats(adapter); + +#ifdef HAVE_NETDEV_STATS_IN_NETDEV + /* only return the current stats */ + return &netdev->stats; +#else + /* only return the current stats */ + return &adapter->net_stats; +#endif /* HAVE_NETDEV_STATS_IN_NETDEV */ +} + +/** + * ixgbe_update_stats - Update the board statistics counters. + * @adapter: board private structure + **/ +void ixgbe_update_stats(struct ixgbe_adapter *adapter) +{ +#ifdef HAVE_NETDEV_STATS_IN_NETDEV + struct net_device_stats *net_stats = &adapter->netdev->stats; +#else + struct net_device_stats *net_stats = &adapter->net_stats; +#endif /* HAVE_NETDEV_STATS_IN_NETDEV */ + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_hw_stats *hwstats = &adapter->stats; + u64 total_mpc = 0; + u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot; + u64 non_eop_descs = 0, restart_queue = 0, tx_busy = 0; + u64 alloc_rx_page_failed = 0, alloc_rx_buff_failed = 0; + u64 bytes = 0, packets = 0, hw_csum_rx_error = 0; +#ifndef IXGBE_NO_LRO + u32 flushed = 0, coal = 0; + int num_q_vectors = 1; +#endif +#ifdef IXGBE_FCOE + struct ixgbe_fcoe *fcoe = &adapter->fcoe; + unsigned int cpu; + u64 fcoe_noddp_counts_sum = 0, fcoe_noddp_ext_buff_counts_sum = 0; +#endif /* IXGBE_FCOE */ + + printk(KERN_DEBUG "ixgbe_update_stats, tx_queues=%d, rx_queues=%d\n", + adapter->num_tx_queues, adapter->num_rx_queues); + + if (test_bit(__IXGBE_DOWN, &adapter->state) || + test_bit(__IXGBE_RESETTING, &adapter->state)) + return; + +#ifndef IXGBE_NO_LRO + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + +#endif + if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { + u64 rsc_count = 0; + u64 rsc_flush = 0; + for (i = 0; i < adapter->num_rx_queues; i++) { + rsc_count += adapter->rx_ring[i]->rx_stats.rsc_count; + rsc_flush += adapter->rx_ring[i]->rx_stats.rsc_flush; + } + adapter->rsc_total_count = rsc_count; + adapter->rsc_total_flush = rsc_flush; + } + +#ifndef IXGBE_NO_LRO + for (i = 0; i < num_q_vectors; i++) { + struct ixgbe_q_vector *q_vector = adapter->q_vector[i]; + if (!q_vector) + continue; + flushed += q_vector->lrolist.stats.flushed; + coal += q_vector->lrolist.stats.coal; + } + adapter->lro_stats.flushed = flushed; + adapter->lro_stats.coal = coal; + +#endif + for (i = 0; i < adapter->num_rx_queues; i++) { + struct ixgbe_ring *rx_ring = adapter->rx_ring[i]; + non_eop_descs += rx_ring->rx_stats.non_eop_descs; + alloc_rx_page_failed += rx_ring->rx_stats.alloc_rx_page_failed; + alloc_rx_buff_failed += rx_ring->rx_stats.alloc_rx_buff_failed; + hw_csum_rx_error += rx_ring->rx_stats.csum_err; + bytes += rx_ring->stats.bytes; + packets += rx_ring->stats.packets; + + } + adapter->non_eop_descs = non_eop_descs; + adapter->alloc_rx_page_failed = alloc_rx_page_failed; + adapter->alloc_rx_buff_failed = alloc_rx_buff_failed; + adapter->hw_csum_rx_error = hw_csum_rx_error; + net_stats->rx_bytes = bytes; + net_stats->rx_packets = packets; + + bytes = 0; + packets = 0; + /* gather some stats to the adapter struct that are per queue */ + for (i = 0; i < adapter->num_tx_queues; i++) { + struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; + restart_queue += tx_ring->tx_stats.restart_queue; + tx_busy += tx_ring->tx_stats.tx_busy; + bytes += tx_ring->stats.bytes; + packets += tx_ring->stats.packets; + } + adapter->restart_queue = restart_queue; + adapter->tx_busy = tx_busy; + net_stats->tx_bytes = bytes; + net_stats->tx_packets = packets; + + hwstats->crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS); + + /* 8 register reads */ + for (i = 0; i < 8; i++) { + /* for packet buffers not used, the register should read 0 */ + mpc = IXGBE_READ_REG(hw, IXGBE_MPC(i)); + missed_rx += mpc; + hwstats->mpc[i] += mpc; + total_mpc += hwstats->mpc[i]; + hwstats->pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); + hwstats->pxofftxc[i] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + hwstats->rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i)); + hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i)); + hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i)); + hwstats->pxonrxc[i] += + IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + hwstats->pxonrxc[i] += + IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); + break; + default: + break; + } + } + + /*16 register reads */ + for (i = 0; i < 16; i++) { + hwstats->qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i)); + hwstats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i)); + if ((hw->mac.type == ixgbe_mac_82599EB) || + (hw->mac.type == ixgbe_mac_X540)) { + hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); + IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); /* to clear */ + hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); + IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); /* to clear */ + } + } + + hwstats->gprc += IXGBE_READ_REG(hw, IXGBE_GPRC); + /* work around hardware counting issue */ + hwstats->gprc -= missed_rx; + + ixgbe_update_xoff_received(adapter); + + /* 82598 hardware only has a 32 bit counter in the high register */ + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC); + hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCH); + hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH); + hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH); + break; + case ixgbe_mac_X540: + /* OS2BMC stats are X540 only*/ + hwstats->o2bgptc += IXGBE_READ_REG(hw, IXGBE_O2BGPTC); + hwstats->o2bspc += IXGBE_READ_REG(hw, IXGBE_O2BSPC); + hwstats->b2ospc += IXGBE_READ_REG(hw, IXGBE_B2OSPC); + hwstats->b2ogprc += IXGBE_READ_REG(hw, IXGBE_B2OGPRC); + case ixgbe_mac_82599EB: + for (i = 0; i < 16; i++) + adapter->hw_rx_no_dma_resources += + IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); + hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL); + IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */ + hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL); + IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */ + hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORL); + IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */ + hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); +#ifdef HAVE_TX_MQ + hwstats->fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); + hwstats->fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS); +#endif /* HAVE_TX_MQ */ +#ifdef IXGBE_FCOE + hwstats->fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC); + hwstats->fclast += IXGBE_READ_REG(hw, IXGBE_FCLAST); + hwstats->fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC); + hwstats->fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC); + hwstats->fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC); + hwstats->fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC); + hwstats->fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC); + /* Add up per cpu counters for total ddp aloc fail */ + if (fcoe && fcoe->pcpu_noddp && fcoe->pcpu_noddp_ext_buff) { + for_each_possible_cpu(cpu) { + fcoe_noddp_counts_sum += + *per_cpu_ptr(fcoe->pcpu_noddp, cpu); + fcoe_noddp_ext_buff_counts_sum += + *per_cpu_ptr(fcoe-> + pcpu_noddp_ext_buff, cpu); + } + } + hwstats->fcoe_noddp = fcoe_noddp_counts_sum; + hwstats->fcoe_noddp_ext_buff = fcoe_noddp_ext_buff_counts_sum; + +#endif /* IXGBE_FCOE */ + break; + default: + break; + } + bprc = IXGBE_READ_REG(hw, IXGBE_BPRC); + hwstats->bprc += bprc; + hwstats->mprc += IXGBE_READ_REG(hw, IXGBE_MPRC); + if (hw->mac.type == ixgbe_mac_82598EB) + hwstats->mprc -= bprc; + hwstats->roc += IXGBE_READ_REG(hw, IXGBE_ROC); + hwstats->prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64); + hwstats->prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127); + hwstats->prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255); + hwstats->prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511); + hwstats->prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023); + hwstats->prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522); + hwstats->rlec += IXGBE_READ_REG(hw, IXGBE_RLEC); + lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC); + hwstats->lxontxc += lxon; + lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); + hwstats->lxofftxc += lxoff; + hwstats->gptc += IXGBE_READ_REG(hw, IXGBE_GPTC); + hwstats->mptc += IXGBE_READ_REG(hw, IXGBE_MPTC); + /* + * 82598 errata - tx of flow control packets is included in tx counters + */ + xon_off_tot = lxon + lxoff; + hwstats->gptc -= xon_off_tot; + hwstats->mptc -= xon_off_tot; + hwstats->gotc -= (xon_off_tot * (ETH_ZLEN + ETH_FCS_LEN)); + hwstats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC); + hwstats->rfc += IXGBE_READ_REG(hw, IXGBE_RFC); + hwstats->rjc += IXGBE_READ_REG(hw, IXGBE_RJC); + hwstats->tpr += IXGBE_READ_REG(hw, IXGBE_TPR); + hwstats->ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64); + hwstats->ptc64 -= xon_off_tot; + hwstats->ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127); + hwstats->ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255); + hwstats->ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511); + hwstats->ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023); + hwstats->ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522); + hwstats->bptc += IXGBE_READ_REG(hw, IXGBE_BPTC); + /* Fill out the OS statistics structure */ + net_stats->multicast = hwstats->mprc; + + /* Rx Errors */ + net_stats->rx_errors = hwstats->crcerrs + + hwstats->rlec; + net_stats->rx_dropped = 0; + net_stats->rx_length_errors = hwstats->rlec; + net_stats->rx_crc_errors = hwstats->crcerrs; + net_stats->rx_missed_errors = total_mpc; + + /* + * VF Stats Collection - skip while resetting because these + * are not clear on read and otherwise you'll sometimes get + * crazy values. + */ + if (!test_bit(__IXGBE_RESETTING, &adapter->state)) { + for (i = 0; i < adapter->num_vfs; i++) { + UPDATE_VF_COUNTER_32bit(IXGBE_PVFGPRC(i), \ + adapter->vfinfo[i].last_vfstats.gprc, \ + adapter->vfinfo[i].vfstats.gprc); + UPDATE_VF_COUNTER_32bit(IXGBE_PVFGPTC(i), \ + adapter->vfinfo[i].last_vfstats.gptc, \ + adapter->vfinfo[i].vfstats.gptc); + UPDATE_VF_COUNTER_36bit(IXGBE_PVFGORC_LSB(i), \ + IXGBE_PVFGORC_MSB(i), \ + adapter->vfinfo[i].last_vfstats.gorc, \ + adapter->vfinfo[i].vfstats.gorc); + UPDATE_VF_COUNTER_36bit(IXGBE_PVFGOTC_LSB(i), \ + IXGBE_PVFGOTC_MSB(i), \ + adapter->vfinfo[i].last_vfstats.gotc, \ + adapter->vfinfo[i].vfstats.gotc); + UPDATE_VF_COUNTER_32bit(IXGBE_PVFMPRC(i), \ + adapter->vfinfo[i].last_vfstats.mprc, \ + adapter->vfinfo[i].vfstats.mprc); + } + } +} + + +#ifdef NO_VNIC + +/** + * ixgbe_watchdog_update_link - update the link status + * @adapter - pointer to the device adapter structure + * @link_speed - pointer to a u32 to store the link_speed + **/ +static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 link_speed = adapter->link_speed; + bool link_up = adapter->link_up; + bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; + + if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)) + return; + + if (hw->mac.ops.check_link) { + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + } else { + /* always assume link is up, if no check link function */ + link_speed = IXGBE_LINK_SPEED_10GB_FULL; + link_up = true; + } + +#ifdef HAVE_DCBNL_IEEE + if (adapter->ixgbe_ieee_pfc) + pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); + +#endif + if (link_up && !((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && pfc_en)) { + hw->mac.ops.fc_enable(hw); + //ixgbe_set_rx_drop_en(adapter); + } + + if (link_up || + time_after(jiffies, (adapter->link_check_timeout + + IXGBE_TRY_LINK_TIMEOUT))) { + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; + IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC); + IXGBE_WRITE_FLUSH(hw); + } + + adapter->link_up = link_up; + adapter->link_speed = link_speed; +} +#endif + + + +#ifdef NO_VNIC + +/** + * ixgbe_service_task - manages and runs subtasks + * @work: pointer to work_struct containing our data + **/ +static void ixgbe_service_task(struct work_struct *work) +{ + //struct ixgbe_adapter *adapter = container_of(work, + // struct ixgbe_adapter, + // service_task); + + //ixgbe_reset_subtask(adapter); + //ixgbe_sfp_detection_subtask(adapter); + //ixgbe_sfp_link_config_subtask(adapter); + //ixgbe_check_overtemp_subtask(adapter); + //ixgbe_watchdog_subtask(adapter); +#ifdef HAVE_TX_MQ + //ixgbe_fdir_reinit_subtask(adapter); +#endif + //ixgbe_check_hang_subtask(adapter); + + //ixgbe_service_event_complete(adapter); +} + + + + +#define IXGBE_TXD_CMD (IXGBE_TXD_CMD_EOP | \ + IXGBE_TXD_CMD_RS) + + +/** + * ixgbe_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ +static int ixgbe_set_mac(struct net_device *netdev, void *p) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + struct sockaddr *addr = p; + int ret; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + ixgbe_del_mac_filter(adapter, hw->mac.addr, + adapter->num_vfs); + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); + + + /* set the correct pool for the new PF MAC address in entry 0 */ + ret = ixgbe_add_mac_filter(adapter, hw->mac.addr, + adapter->num_vfs); + return ret > 0 ? 0 : ret; +} + + +/** + * ixgbe_ioctl - + * @netdev: + * @ifreq: + * @cmd: + **/ +static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { +#ifdef ETHTOOL_OPS_COMPAT + case SIOCETHTOOL: + return ethtool_ioctl(ifr); +#endif + default: + return -EOPNOTSUPP; + } +} +#endif /* NO_VNIC */ + + +void ixgbe_do_reset(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + if (netif_running(netdev)) + ixgbe_reinit_locked(adapter); + else + ixgbe_reset(adapter); +} + + + + + + +/** + * ixgbe_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in ixgbe_pci_tbl + * + * Returns 0 on success, negative on failure + * + * ixgbe_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ +//static +int ixgbe_kni_probe(struct pci_dev *pdev, + struct net_device **lad_dev) +{ + size_t count; + struct net_device *netdev; + struct ixgbe_adapter *adapter = NULL; + struct ixgbe_hw *hw = NULL; + static int cards_found; + int i, err; + u16 offset; + u16 eeprom_verh, eeprom_verl, eeprom_cfg_blkh, eeprom_cfg_blkl; + u32 etrack_id; + u16 build, major, patch; + char *info_string, *i_s_var; + u8 part_str[IXGBE_PBANUM_LENGTH]; + enum ixgbe_mac_type mac_type = ixgbe_mac_unknown; +#ifdef HAVE_TX_MQ + unsigned int indices = num_possible_cpus(); +#endif /* HAVE_TX_MQ */ +#ifdef IXGBE_FCOE + u16 device_caps; +#endif + u16 wol_cap; + + err = pci_enable_device_mem(pdev); + if (err) + return err; + + +#ifdef NO_VNIC + err = pci_request_selected_regions(pdev, pci_select_bars(pdev, + IORESOURCE_MEM), ixgbe_driver_name); + if (err) { + dev_err(pci_dev_to_dev(pdev), + "pci_request_selected_regions failed 0x%x\n", err); + goto err_pci_reg; + } +#endif + + /* + * The mac_type is needed before we have the adapter is set up + * so rather than maintain two devID -> MAC tables we dummy up + * an ixgbe_hw stuct and use ixgbe_set_mac_type. + */ + hw = vmalloc(sizeof(struct ixgbe_hw)); + if (!hw) { + pr_info("Unable to allocate memory for early mac " + "check\n"); + } else { + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + ixgbe_set_mac_type(hw); + mac_type = hw->mac.type; + vfree(hw); + } + +#ifdef NO_VNIC + /* + * Workaround of Silicon errata on 82598. Disable LOs in the PCI switch + * port to which the 82598 is connected to prevent duplicate + * completions caused by LOs. We need the mac type so that we only + * do this on 82598 devices, ixgbe_set_mac_type does this for us if + * we set it's device ID. + */ + if (mac_type == ixgbe_mac_82598EB) + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); + + pci_enable_pcie_error_reporting(pdev); + + pci_set_master(pdev); +#endif + +#ifdef HAVE_TX_MQ +#ifdef CONFIG_DCB +#ifdef HAVE_MQPRIO + indices *= IXGBE_DCB_MAX_TRAFFIC_CLASS; +#else + indices = max_t(unsigned int, indices, IXGBE_MAX_DCB_INDICES); +#endif /* HAVE_MQPRIO */ +#endif /* CONFIG_DCB */ + + if (mac_type == ixgbe_mac_82598EB) + indices = min_t(unsigned int, indices, IXGBE_MAX_RSS_INDICES); + else + indices = min_t(unsigned int, indices, IXGBE_MAX_FDIR_INDICES); + +#ifdef IXGBE_FCOE + indices += min_t(unsigned int, num_possible_cpus(), + IXGBE_MAX_FCOE_INDICES); +#endif + netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices); +#else /* HAVE_TX_MQ */ + netdev = alloc_etherdev(sizeof(struct ixgbe_adapter)); +#endif /* HAVE_TX_MQ */ + if (!netdev) { + err = -ENOMEM; + goto err_alloc_etherdev; + } + + SET_NETDEV_DEV(netdev, &pdev->dev); + + adapter = netdev_priv(netdev); + //pci_set_drvdata(pdev, adapter); + + adapter->netdev = netdev; + adapter->pdev = pdev; + hw = &adapter->hw; + hw->back = adapter; + adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1; + +#ifdef HAVE_PCI_ERS + /* + * call save state here in standalone driver because it relies on + * adapter struct to exist, and needs to call netdev_priv + */ + pci_save_state(pdev); + +#endif + hw->hw_addr = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!hw->hw_addr) { + err = -EIO; + goto err_ioremap; + } + //ixgbe_assign_netdev_ops(netdev); + ixgbe_set_ethtool_ops(netdev); + + strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name)); + + adapter->bd_number = cards_found; + + /* setup the private structure */ + err = ixgbe_sw_init(adapter); + if (err) + goto err_sw_init; + + /* Make it possible the adapter to be woken up via WOL */ + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); + break; + default: + break; + } + + /* + * check_options must be called before setup_link to set up + * hw->fc completely + */ + //ixgbe_check_options(adapter); + +#ifndef NO_VNIC + /* reset_hw fills in the perm_addr as well */ + hw->phy.reset_if_overtemp = true; + err = hw->mac.ops.reset_hw(hw); + hw->phy.reset_if_overtemp = false; + if (err == IXGBE_ERR_SFP_NOT_PRESENT && + hw->mac.type == ixgbe_mac_82598EB) { + err = 0; + } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { + e_dev_err("failed to load because an unsupported SFP+ " + "module type was detected.\n"); + e_dev_err("Reload the driver after installing a supported " + "module.\n"); + goto err_sw_init; + } else if (err) { + e_dev_err("HW Init failed: %d\n", err); + goto err_sw_init; + } +#endif + + //if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + // ixgbe_probe_vf(adapter); + + +#ifdef MAX_SKB_FRAGS + netdev->features |= NETIF_F_SG | + NETIF_F_IP_CSUM; + +#ifdef NETIF_F_IPV6_CSUM + netdev->features |= NETIF_F_IPV6_CSUM; +#endif + +#ifdef NETIF_F_HW_VLAN_TX + netdev->features |= NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX; +#endif +#ifdef NETIF_F_TSO + netdev->features |= NETIF_F_TSO; +#endif /* NETIF_F_TSO */ +#ifdef NETIF_F_TSO6 + netdev->features |= NETIF_F_TSO6; +#endif /* NETIF_F_TSO6 */ +#ifdef NETIF_F_RXHASH + netdev->features |= NETIF_F_RXHASH; +#endif /* NETIF_F_RXHASH */ + +#ifdef HAVE_NDO_SET_FEATURES + netdev->features |= NETIF_F_RXCSUM; + + /* copy netdev features into list of user selectable features */ + netdev->hw_features |= netdev->features; + + /* give us the option of enabling RSC/LRO later */ +#ifdef IXGBE_NO_LRO + if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) +#endif + netdev->hw_features |= NETIF_F_LRO; + +#else +#ifdef NETIF_F_GRO + + /* this is only needed on kernels prior to 2.6.39 */ + netdev->features |= NETIF_F_GRO; +#endif /* NETIF_F_GRO */ +#endif + +#ifdef NETIF_F_HW_VLAN_TX + /* set this bit last since it cannot be part of hw_features */ + netdev->features |= NETIF_F_HW_VLAN_FILTER; +#endif + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + netdev->features |= NETIF_F_SCTP_CSUM; +#ifdef HAVE_NDO_SET_FEATURES + netdev->hw_features |= NETIF_F_SCTP_CSUM | + NETIF_F_NTUPLE; +#endif + break; + default: + break; + } + +#ifdef HAVE_NETDEV_VLAN_FEATURES + netdev->vlan_features |= NETIF_F_SG | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | + NETIF_F_TSO | + NETIF_F_TSO6; + +#endif /* HAVE_NETDEV_VLAN_FEATURES */ + /* + * If perfect filters were enabled in check_options(), enable them + * on the netdevice too. + */ + if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) + netdev->features |= NETIF_F_NTUPLE; + if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) + adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) + adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; + if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) { + adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; + /* clear n-tuple support in the netdev unconditionally */ + netdev->features &= ~NETIF_F_NTUPLE; + } + +#ifdef NETIF_F_RXHASH + if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) + netdev->features &= ~NETIF_F_RXHASH; + +#endif /* NETIF_F_RXHASH */ + if (netdev->features & NETIF_F_LRO) { + if ((adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) && + ((adapter->rx_itr_setting == 1) || + (adapter->rx_itr_setting > IXGBE_MIN_RSC_ITR))) { + adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; + } else if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) { +#ifdef IXGBE_NO_LRO + e_info(probe, "InterruptThrottleRate set too high, " + "disabling RSC\n"); +#else + e_info(probe, "InterruptThrottleRate set too high, " + "falling back to software LRO\n"); +#endif + } + } +#ifdef CONFIG_DCB + //netdev->dcbnl_ops = &dcbnl_ops; +#endif + +#ifdef IXGBE_FCOE +#ifdef NETIF_F_FSO + if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) { + ixgbe_get_device_caps(hw, &device_caps); + if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS) { + adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; + adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; + e_info(probe, "FCoE offload feature is not available. " + "Disabling FCoE offload feature\n"); + } +#ifndef HAVE_NETDEV_OPS_FCOE_ENABLE + else { + adapter->flags |= IXGBE_FLAG_FCOE_ENABLED; + adapter->ring_feature[RING_F_FCOE].indices = + IXGBE_FCRETA_SIZE; + netdev->features |= NETIF_F_FSO | + NETIF_F_FCOE_CRC | + NETIF_F_FCOE_MTU; + netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1; + } +#endif /* HAVE_NETDEV_OPS_FCOE_ENABLE */ +#ifdef HAVE_NETDEV_VLAN_FEATURES + netdev->vlan_features |= NETIF_F_FSO | + NETIF_F_FCOE_CRC | + NETIF_F_FCOE_MTU; +#endif /* HAVE_NETDEV_VLAN_FEATURES */ + } +#endif /* NETIF_F_FSO */ +#endif /* IXGBE_FCOE */ + +#endif /* MAX_SKB_FRAGS */ + /* make sure the EEPROM is good */ + if (hw->eeprom.ops.validate_checksum && + (hw->eeprom.ops.validate_checksum(hw, NULL) < 0)) { + e_dev_err("The EEPROM Checksum Is Not Valid\n"); + err = -EIO; + goto err_sw_init; + } + + memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len); +#ifdef ETHTOOL_GPERMADDR + memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len); + + if (ixgbe_validate_mac_addr(netdev->perm_addr)) { + e_dev_err("invalid MAC address\n"); + err = -EIO; + goto err_sw_init; + } +#else + if (ixgbe_validate_mac_addr(netdev->dev_addr)) { + e_dev_err("invalid MAC address\n"); + err = -EIO; + goto err_sw_init; + } +#endif + memcpy(&adapter->mac_table[0].addr, hw->mac.perm_addr, + netdev->addr_len); + adapter->mac_table[0].queue = adapter->num_vfs; + adapter->mac_table[0].state = (IXGBE_MAC_STATE_DEFAULT | + IXGBE_MAC_STATE_IN_USE); + hw->mac.ops.set_rar(hw, 0, adapter->mac_table[0].addr, + adapter->mac_table[0].queue, + IXGBE_RAH_AV); + + //setup_timer(&adapter->service_timer, &ixgbe_service_timer, + // (unsigned long) adapter); + + //INIT_WORK(&adapter->service_task, ixgbe_service_task); + //clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); + + //err = ixgbe_init_interrupt_scheme(adapter); + //if (err) + // goto err_sw_init; + + //adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; + ixgbe_set_num_queues(adapter); + + adapter->wol = 0; + /* WOL not supported for all but the following */ + switch (pdev->device) { + case IXGBE_DEV_ID_82599_SFP: + /* Only these subdevice supports WOL */ + switch (pdev->subsystem_device) { + case IXGBE_SUBDEV_ID_82599_560FLR: + /* only support first port */ + if (hw->bus.func != 0) + break; + case IXGBE_SUBDEV_ID_82599_SFP: + adapter->wol = IXGBE_WUFC_MAG; + break; + } + break; + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: + /* All except this subdevice support WOL */ + if (pdev->subsystem_device != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) + adapter->wol = IXGBE_WUFC_MAG; + break; + case IXGBE_DEV_ID_82599_KX4: + adapter->wol = IXGBE_WUFC_MAG; + break; + case IXGBE_DEV_ID_X540T: + /* Check eeprom to see if it is enabled */ + ixgbe_read_eeprom(hw, 0x2c, &adapter->eeprom_cap); + wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK; + + if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) || + ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) && + (hw->bus.func == 0))) + adapter->wol = IXGBE_WUFC_MAG; + break; + } + //device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + + /* + * Save off EEPROM version number and Option Rom version which + * together make a unique identify for the eeprom + */ + ixgbe_read_eeprom(hw, 0x2e, &eeprom_verh); + ixgbe_read_eeprom(hw, 0x2d, &eeprom_verl); + + etrack_id = (eeprom_verh << 16) | eeprom_verl; + + ixgbe_read_eeprom(hw, 0x17, &offset); + + /* Make sure offset to SCSI block is valid */ + if (!(offset == 0x0) && !(offset == 0xffff)) { + ixgbe_read_eeprom(hw, offset + 0x84, &eeprom_cfg_blkh); + ixgbe_read_eeprom(hw, offset + 0x83, &eeprom_cfg_blkl); + + /* Only display Option Rom if exist */ + if (eeprom_cfg_blkl && eeprom_cfg_blkh) { + major = eeprom_cfg_blkl >> 8; + build = (eeprom_cfg_blkl << 8) | (eeprom_cfg_blkh >> 8); + patch = eeprom_cfg_blkh & 0x00ff; + + snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id), + "0x%08x, %d.%d.%d", etrack_id, major, build, + patch); + } else { + snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id), + "0x%08x", etrack_id); + } + } else { + snprintf(adapter->eeprom_id, sizeof(adapter->eeprom_id), + "0x%08x", etrack_id); + } + + /* reset the hardware with the new settings */ + err = hw->mac.ops.start_hw(hw); + if (err == IXGBE_ERR_EEPROM_VERSION) { + /* We are running on a pre-production device, log a warning */ + e_dev_warn("This device is a pre-production adapter/LOM. " + "Please be aware there may be issues associated " + "with your hardware. If you are experiencing " + "problems please contact your Intel or hardware " + "representative who provided you with this " + "hardware.\n"); + } + /* pick up the PCI bus settings for reporting later */ + if (hw->mac.ops.get_bus_info) + hw->mac.ops.get_bus_info(hw); + + strlcpy(netdev->name, "eth%d", sizeof(netdev->name)); + *lad_dev = netdev; + + adapter->netdev_registered = true; +#ifdef NO_VNIC + /* power down the optics */ + if ((hw->phy.multispeed_fiber) || + ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) && + (hw->mac.type == ixgbe_mac_82599EB))) + ixgbe_disable_tx_laser(hw); + + /* carrier off reporting is important to ethtool even BEFORE open */ + netif_carrier_off(netdev); + /* keep stopping all the transmit queues for older kernels */ + netif_tx_stop_all_queues(netdev); +#endif + + /* print all messages at the end so that we use our eth%d name */ + /* print bus type/speed/width info */ + e_dev_info("(PCI Express:%s:%s) ", + (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" : + hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" : + "Unknown"), + (hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" : + hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" : + hw->bus.width == ixgbe_bus_width_pcie_x1 ? "Width x1" : + "Unknown")); + + /* print the MAC address */ + for (i = 0; i < 6; i++) + pr_cont("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':'); + + /* First try to read PBA as a string */ + err = ixgbe_read_pba_string(hw, part_str, IXGBE_PBANUM_LENGTH); + if (err) + strlcpy(part_str, "Unknown", sizeof(part_str)); + if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present) + e_info(probe, "MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n", + hw->mac.type, hw->phy.type, hw->phy.sfp_type, part_str); + else + e_info(probe, "MAC: %d, PHY: %d, PBA No: %s\n", + hw->mac.type, hw->phy.type, part_str); + + if (((hw->bus.speed == ixgbe_bus_speed_2500) && + (hw->bus.width <= ixgbe_bus_width_pcie_x4)) || + (hw->bus.width <= ixgbe_bus_width_pcie_x2)) { + e_dev_warn("PCI-Express bandwidth available for this " + "card is not sufficient for optimal " + "performance.\n"); + e_dev_warn("For optimal performance a x8 PCI-Express " + "slot is required.\n"); + } + +#define INFO_STRING_LEN 255 + info_string = kzalloc(INFO_STRING_LEN, GFP_KERNEL); + if (!info_string) { + e_err(probe, "allocation for info string failed\n"); + goto no_info_string; + } + count = 0; + i_s_var = info_string; + count += snprintf(i_s_var, INFO_STRING_LEN, "Enabled Features: "); + + i_s_var = info_string + count; + count += snprintf(i_s_var, (INFO_STRING_LEN - count), + "RxQ: %d TxQ: %d ", adapter->num_rx_queues, + adapter->num_tx_queues); + i_s_var = info_string + count; +#ifdef IXGBE_FCOE + if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { + count += snprintf(i_s_var, INFO_STRING_LEN - count, "FCoE "); + i_s_var = info_string + count; + } +#endif + if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { + count += snprintf(i_s_var, INFO_STRING_LEN - count, + "FdirHash "); + i_s_var = info_string + count; + } + if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) { + count += snprintf(i_s_var, INFO_STRING_LEN - count, + "FdirPerfect "); + i_s_var = info_string + count; + } + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + count += snprintf(i_s_var, INFO_STRING_LEN - count, "DCB "); + i_s_var = info_string + count; + } + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { + count += snprintf(i_s_var, INFO_STRING_LEN - count, "RSS "); + i_s_var = info_string + count; + } + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { + count += snprintf(i_s_var, INFO_STRING_LEN - count, "DCA "); + i_s_var = info_string + count; + } + if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { + count += snprintf(i_s_var, INFO_STRING_LEN - count, "RSC "); + i_s_var = info_string + count; + } +#ifndef IXGBE_NO_LRO + else if (netdev->features & NETIF_F_LRO) { + count += snprintf(i_s_var, INFO_STRING_LEN - count, "LRO "); + i_s_var = info_string + count; + } +#endif + + BUG_ON(i_s_var > (info_string + INFO_STRING_LEN)); + /* end features printing */ + e_info(probe, "%s\n", info_string); + kfree(info_string); +no_info_string: + + /* firmware requires blank driver version */ + ixgbe_set_fw_drv_ver(hw, 0xFF, 0xFF, 0xFF, 0xFF); + +#if defined(HAVE_NETDEV_STORAGE_ADDRESS) && defined(NETDEV_HW_ADDR_T_SAN) + /* add san mac addr to netdev */ + //ixgbe_add_sanmac_netdev(netdev); + +#endif /* (HAVE_NETDEV_STORAGE_ADDRESS) && (NETDEV_HW_ADDR_T_SAN) */ + e_info(probe, "Intel(R) 10 Gigabit Network Connection\n"); + cards_found++; + +#ifdef IXGBE_SYSFS + //if (ixgbe_sysfs_init(adapter)) + // e_err(probe, "failed to allocate sysfs resources\n"); +#else +#ifdef IXGBE_PROCFS + //if (ixgbe_procfs_init(adapter)) + // e_err(probe, "failed to allocate procfs resources\n"); +#endif /* IXGBE_PROCFS */ +#endif /* IXGBE_SYSFS */ + + return 0; + +//err_register: + //ixgbe_clear_interrupt_scheme(adapter); + //ixgbe_release_hw_control(adapter); +err_sw_init: + adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; + if (adapter->mac_table) + kfree(adapter->mac_table); + iounmap(hw->hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + //pci_release_selected_regions(pdev, + // pci_select_bars(pdev, IORESOURCE_MEM)); +//err_pci_reg: +//err_dma: + pci_disable_device(pdev); + return err; +} + +/** + * ixgbe_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * ixgbe_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +void ixgbe_kni_remove(struct pci_dev *pdev) +{ + pci_disable_device(pdev); +} + + +u16 ixgbe_read_pci_cfg_word(struct ixgbe_hw *hw, u32 reg) +{ + u16 value; + struct ixgbe_adapter *adapter = hw->back; + + pci_read_config_word(adapter->pdev, reg, &value); + return value; +} + +void ixgbe_write_pci_cfg_word(struct ixgbe_hw *hw, u32 reg, u16 value) +{ + struct ixgbe_adapter *adapter = hw->back; + + pci_write_config_word(adapter->pdev, reg, value); +} + +void ewarn(struct ixgbe_hw *hw, const char *st, u32 status) +{ + struct ixgbe_adapter *adapter = hw->back; + + netif_warn(adapter, drv, adapter->netdev, "%s", st); +} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_mbx.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_mbx.h new file mode 100644 index 00000000..53ace941 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_mbx.h @@ -0,0 +1,90 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_MBX_H_ +#define _IXGBE_MBX_H_ + +#include "ixgbe_type.h" + +#define IXGBE_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */ +#define IXGBE_ERR_MBX -100 + +#define IXGBE_VFMAILBOX 0x002FC +#define IXGBE_VFMBMEM 0x00200 + +/* Define mailbox register bits */ +#define IXGBE_VFMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */ +#define IXGBE_VFMAILBOX_ACK 0x00000002 /* Ack PF message received */ +#define IXGBE_VFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ +#define IXGBE_VFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ +#define IXGBE_VFMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */ +#define IXGBE_VFMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */ +#define IXGBE_VFMAILBOX_RSTI 0x00000040 /* PF has reset indication */ +#define IXGBE_VFMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */ +#define IXGBE_VFMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */ + +#define IXGBE_PFMAILBOX_STS 0x00000001 /* Initiate message send to VF */ +#define IXGBE_PFMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */ +#define IXGBE_PFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ +#define IXGBE_PFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ +#define IXGBE_PFMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */ + +#define IXGBE_MBVFICR_VFREQ_MASK 0x0000FFFF /* bits for VF messages */ +#define IXGBE_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */ +#define IXGBE_MBVFICR_VFACK_MASK 0xFFFF0000 /* bits for VF acks */ +#define IXGBE_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */ + + +/* If it's a IXGBE_VF_* msg then it originates in the VF and is sent to the + * PF. The reverse is true if it is IXGBE_PF_*. + * Message ACK's are the value or'd with 0xF0000000 + */ +#define IXGBE_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with + * this are the ACK */ +#define IXGBE_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with + * this are the NACK */ +#define IXGBE_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still + * clear to send requests */ +#define IXGBE_VT_MSGINFO_SHIFT 16 +/* bits 23:16 are used for extra info for certain messages */ +#define IXGBE_VT_MSGINFO_MASK (0xFF << IXGBE_VT_MSGINFO_SHIFT) + +#define IXGBE_VF_RESET 0x01 /* VF requests reset */ +#define IXGBE_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */ +#define IXGBE_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */ +#define IXGBE_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */ +#define IXGBE_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */ +#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */ + +/* length of permanent address message returned from PF */ +#define IXGBE_VF_PERMADDR_MSG_LEN 4 +/* word in permanent address message with the current multicast type */ +#define IXGBE_VF_MC_TYPE_WORD 3 + +#define IXGBE_PF_CONTROL_MSG 0x0100 /* PF control message */ + + +#define IXGBE_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */ +#define IXGBE_VF_MBX_INIT_DELAY 500 /* microseconds between retries */ + +s32 ixgbe_read_mbx(struct ixgbe_hw *, u32 *, u16, u16); +s32 ixgbe_write_mbx(struct ixgbe_hw *, u32 *, u16, u16); +s32 ixgbe_read_posted_mbx(struct ixgbe_hw *, u32 *, u16, u16); +s32 ixgbe_write_posted_mbx(struct ixgbe_hw *, u32 *, u16, u16); +s32 ixgbe_check_for_msg(struct ixgbe_hw *, u16); +s32 ixgbe_check_for_ack(struct ixgbe_hw *, u16); +s32 ixgbe_check_for_rst(struct ixgbe_hw *, u16); +void ixgbe_init_mbx_ops_generic(struct ixgbe_hw *hw); +void ixgbe_init_mbx_params_vf(struct ixgbe_hw *); +void ixgbe_init_mbx_params_pf(struct ixgbe_hw *); + +#endif /* _IXGBE_MBX_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_osdep.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_osdep.h new file mode 100644 index 00000000..7b3f8c51 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_osdep.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + + +/* glue for the OS independent part of ixgbe + * includes register access macros + */ + +#ifndef _IXGBE_OSDEP_H_ +#define _IXGBE_OSDEP_H_ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/if_ether.h> +#include <linux/sched.h> +#include "kcompat.h" + + +#ifndef msleep +#define msleep(x) do { if (in_interrupt()) { \ + /* Don't mdelay in interrupt context! */ \ + BUG(); \ + } else { \ + msleep(x); \ + } } while (0) + +#endif + +#undef ASSERT + +#ifdef DBG +#define hw_dbg(hw, S, A...) printk(KERN_DEBUG S, ## A) +#else +#define hw_dbg(hw, S, A...) do {} while (0) +#endif + +#define e_dev_info(format, arg...) \ + dev_info(pci_dev_to_dev(adapter->pdev), format, ## arg) +#define e_dev_warn(format, arg...) \ + dev_warn(pci_dev_to_dev(adapter->pdev), format, ## arg) +#define e_dev_err(format, arg...) \ + dev_err(pci_dev_to_dev(adapter->pdev), format, ## arg) +#define e_dev_notice(format, arg...) \ + dev_notice(pci_dev_to_dev(adapter->pdev), format, ## arg) +#define e_info(msglvl, format, arg...) \ + netif_info(adapter, msglvl, adapter->netdev, format, ## arg) +#define e_err(msglvl, format, arg...) \ + netif_err(adapter, msglvl, adapter->netdev, format, ## arg) +#define e_warn(msglvl, format, arg...) \ + netif_warn(adapter, msglvl, adapter->netdev, format, ## arg) +#define e_crit(msglvl, format, arg...) \ + netif_crit(adapter, msglvl, adapter->netdev, format, ## arg) + + +#ifdef DBG +#define IXGBE_WRITE_REG(a, reg, value) do {\ + switch (reg) { \ + case IXGBE_EIMS: \ + case IXGBE_EIMC: \ + case IXGBE_EIAM: \ + case IXGBE_EIAC: \ + case IXGBE_EICR: \ + case IXGBE_EICS: \ + printk("%s: Reg - 0x%05X, value - 0x%08X\n", __func__, \ + reg, (u32)(value)); \ + default: \ + break; \ + } \ + writel((value), ((a)->hw_addr + (reg))); \ +} while (0) +#else +#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg))) +#endif + +#define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg)) + +#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) ( \ + writel((value), ((a)->hw_addr + (reg) + ((offset) << 2)))) + +#define IXGBE_READ_REG_ARRAY(a, reg, offset) ( \ + readl((a)->hw_addr + (reg) + ((offset) << 2))) + +#ifndef writeq +#define writeq(val, addr) do { writel((u32) (val), addr); \ + writel((u32) (val >> 32), (addr + 4)); \ + } while (0); +#endif + +#define IXGBE_WRITE_REG64(a, reg, value) writeq((value), ((a)->hw_addr + (reg))) + +#define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS) +struct ixgbe_hw; +extern u16 ixgbe_read_pci_cfg_word(struct ixgbe_hw *hw, u32 reg); +extern void ixgbe_write_pci_cfg_word(struct ixgbe_hw *hw, u32 reg, u16 value); +extern void ewarn(struct ixgbe_hw *hw, const char *str, u32 status); + +#define IXGBE_READ_PCIE_WORD ixgbe_read_pci_cfg_word +#define IXGBE_WRITE_PCIE_WORD ixgbe_write_pci_cfg_word +#define IXGBE_EEPROM_GRANT_ATTEMPS 100 +#define IXGBE_HTONL(_i) htonl(_i) +#define IXGBE_NTOHL(_i) ntohl(_i) +#define IXGBE_NTOHS(_i) ntohs(_i) +#define IXGBE_CPU_TO_LE32(_i) cpu_to_le32(_i) +#define IXGBE_LE32_TO_CPUS(_i) le32_to_cpus(_i) +#define EWARN(H, W, S) ewarn(H, W, S) + +#endif /* _IXGBE_OSDEP_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c new file mode 100644 index 00000000..a47a2ff8 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.c @@ -0,0 +1,1832 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe_api.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +static void ixgbe_i2c_start(struct ixgbe_hw *hw); +static void ixgbe_i2c_stop(struct ixgbe_hw *hw); +static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data); +static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data); +static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw); +static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data); +static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data); +static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); +static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); +static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data); +static bool ixgbe_get_i2c_data(u32 *i2cctl); + +/** + * ixgbe_init_phy_ops_generic - Inits PHY function ptrs + * @hw: pointer to the hardware structure + * + * Initialize the function pointers. + **/ +s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_phy_info *phy = &hw->phy; + + /* PHY */ + phy->ops.identify = &ixgbe_identify_phy_generic; + phy->ops.reset = &ixgbe_reset_phy_generic; + phy->ops.read_reg = &ixgbe_read_phy_reg_generic; + phy->ops.write_reg = &ixgbe_write_phy_reg_generic; + phy->ops.setup_link = &ixgbe_setup_phy_link_generic; + phy->ops.setup_link_speed = &ixgbe_setup_phy_link_speed_generic; + phy->ops.check_link = NULL; + phy->ops.get_firmware_version = ixgbe_get_phy_firmware_version_generic; + phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_generic; + phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_generic; + phy->ops.read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic; + phy->ops.write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic; + phy->ops.i2c_bus_clear = &ixgbe_i2c_bus_clear; + phy->ops.identify_sfp = &ixgbe_identify_module_generic; + phy->sfp_type = ixgbe_sfp_type_unknown; + phy->ops.check_overtemp = &ixgbe_tn_check_overtemp; + return 0; +} + +/** + * ixgbe_identify_phy_generic - Get physical layer module + * @hw: pointer to hardware structure + * + * Determines the physical layer module found on the current adapter. + **/ +s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u32 phy_addr; + u16 ext_ability = 0; + + if (hw->phy.type == ixgbe_phy_unknown) { + for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { + if (ixgbe_validate_phy_addr(hw, phy_addr)) { + hw->phy.addr = phy_addr; + ixgbe_get_phy_id(hw); + hw->phy.type = + ixgbe_get_phy_type_from_id(hw->phy.id); + + if (hw->phy.type == ixgbe_phy_unknown) { + hw->phy.ops.read_reg(hw, + IXGBE_MDIO_PHY_EXT_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &ext_ability); + if (ext_ability & + (IXGBE_MDIO_PHY_10GBASET_ABILITY | + IXGBE_MDIO_PHY_1000BASET_ABILITY)) + hw->phy.type = + ixgbe_phy_cu_unknown; + else + hw->phy.type = + ixgbe_phy_generic; + } + + status = 0; + break; + } + } + /* clear value if nothing found */ + if (status != 0) + hw->phy.addr = 0; + } else { + status = 0; + } + + return status; +} + +/** + * ixgbe_validate_phy_addr - Determines phy address is valid + * @hw: pointer to hardware structure + * + **/ +bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr) +{ + u16 phy_id = 0; + bool valid = false; + + hw->phy.addr = phy_addr; + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id); + + if (phy_id != 0xFFFF && phy_id != 0x0) + valid = true; + + return valid; +} + +/** + * ixgbe_get_phy_id - Get the phy type + * @hw: pointer to hardware structure + * + **/ +s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) +{ + u32 status; + u16 phy_id_high = 0; + u16 phy_id_low = 0; + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &phy_id_high); + + if (status == 0) { + hw->phy.id = (u32)(phy_id_high << 16); + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &phy_id_low); + hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK); + hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK); + } + return status; +} + +/** + * ixgbe_get_phy_type_from_id - Get the phy type + * @hw: pointer to hardware structure + * + **/ +enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) +{ + enum ixgbe_phy_type phy_type; + + switch (phy_id) { + case TN1010_PHY_ID: + phy_type = ixgbe_phy_tn; + break; + case X540_PHY_ID: + phy_type = ixgbe_phy_aq; + break; + case QT2022_PHY_ID: + phy_type = ixgbe_phy_qt; + break; + case ATH_PHY_ID: + phy_type = ixgbe_phy_nl; + break; + default: + phy_type = ixgbe_phy_unknown; + break; + } + + hw_dbg(hw, "phy type found is %d\n", phy_type); + return phy_type; +} + +/** + * ixgbe_reset_phy_generic - Performs a PHY reset + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) +{ + u32 i; + u16 ctrl = 0; + s32 status = 0; + + if (hw->phy.type == ixgbe_phy_unknown) + status = ixgbe_identify_phy_generic(hw); + + if (status != 0 || hw->phy.type == ixgbe_phy_none) + goto out; + + /* Don't reset PHY if it's shut down due to overtemp. */ + if (!hw->phy.reset_if_overtemp && + (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw))) + goto out; + + /* + * Perform soft PHY reset to the PHY_XS. + * This will cause a soft reset to the PHY + */ + hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, + IXGBE_MDIO_PHY_XS_RESET); + + /* + * Poll for reset bit to self-clear indicating reset is complete. + * Some PHYs could take up to 3 seconds to complete and need about + * 1.7 usec delay after the reset is complete. + */ + for (i = 0; i < 30; i++) { + msleep(100); + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, &ctrl); + if (!(ctrl & IXGBE_MDIO_PHY_XS_RESET)) { + udelay(2); + break; + } + } + + if (ctrl & IXGBE_MDIO_PHY_XS_RESET) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "PHY reset polling failed to complete.\n"); + } + +out: + return status; +} + +/** + * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @phy_data: Pointer to read data from PHY register + **/ +s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data) +{ + u32 command; + u32 i; + u32 data; + s32 status = 0; + u16 gssr; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == 0) { + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address command did not complete.\n"); + status = IXGBE_ERR_PHY; + } + + if (status == 0) { + /* + * Address cycle complete, setup and write the read + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY read command didn't complete\n"); + status = IXGBE_ERR_PHY; + } else { + /* + * Read operation is complete. Get the data + * from MSRWD + */ + data = IXGBE_READ_REG(hw, IXGBE_MSRWD); + data >>= IXGBE_MSRWD_READ_DATA_SHIFT; + *phy_data = (u16)(data); + } + } + + hw->mac.ops.release_swfw_sync(hw, gssr); + } + + return status; +} + +/** + * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register + **/ +s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + u32 command; + u32 i; + s32 status = 0; + u16 gssr; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == 0) { + /* Put the data in the MDI single read and write data register*/ + IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); + + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address cmd didn't complete\n"); + status = IXGBE_ERR_PHY; + } + + if (status == 0) { + /* + * Address cycle complete, setup and write the write + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address cmd didn't complete\n"); + status = IXGBE_ERR_PHY; + } + } + + hw->mac.ops.release_swfw_sync(hw, gssr); + } + + return status; +} + +/** + * ixgbe_setup_phy_link_generic - Set and restart autoneg + * @hw: pointer to hardware structure + * + * Restart autonegotiation and PHY and waits for completion. + **/ +s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; + bool autoneg = false; + ixgbe_link_speed speed; + + ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg); + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + /* Set or unset auto-negotiation 10G advertisement */ + hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE; + + hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + /* Set or unset auto-negotiation 1G advertisement */ + hw->phy.ops.read_reg(hw, + IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE; + + hw->phy.ops.write_reg(hw, + IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_100_FULL) { + /* Set or unset auto-negotiation 100M advertisement */ + hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= ~(IXGBE_MII_100BASE_T_ADVERTISE | + IXGBE_MII_100BASE_T_ADVERTISE_HALF); + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) + autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE; + + hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + } + + /* Restart PHY autonegotiation and wait for completion */ + hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg); + + autoneg_reg |= IXGBE_MII_RESTART; + + hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg); + + /* Wait for autonegotiation to finish */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + /* Restart PHY autonegotiation and wait for completion */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE; + if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) + break; + } + + if (time_out == max_time_out) { + status = IXGBE_ERR_LINK_SETUP; + hw_dbg(hw, "ixgbe_setup_phy_link_generic: time out"); + } + + return status; +} + +/** + * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + **/ +s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + + /* + * Clear autoneg_advertised and set new values based on input link + * speed. + */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + if (speed & IXGBE_LINK_SPEED_100_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; + + /* Setup link based on the new speed settings */ + hw->phy.ops.setup_link(hw); + + return 0; +} + +/** + * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value + * + * Determines the link capabilities by reading the AUTOC register. + **/ +s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + s32 status = IXGBE_ERR_LINK_SETUP; + u16 speed_ability; + + *speed = 0; + *autoneg = true; + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &speed_ability); + + if (status == 0) { + if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M) + *speed |= IXGBE_LINK_SPEED_100_FULL; + } + + return status; +} + +/** + * ixgbe_check_phy_link_tnx - Determine link and speed status + * @hw: pointer to hardware structure + * + * Reads the VS1 register to determine if link is up and the current speed for + * the PHY. + **/ +s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 phy_link = 0; + u16 phy_speed = 0; + u16 phy_data = 0; + + /* Initialize speed and link to default case */ + *link_up = false; + *speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* + * Check current speed and link status of the PHY register. + * This is a vendor specific register and may have to + * be changed for other copper PHYs. + */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + &phy_data); + phy_link = phy_data & IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; + phy_speed = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS; + if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) { + *link_up = true; + if (phy_speed == + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + } + } + + return status; +} + +/** + * ixgbe_setup_phy_link_tnx - Set and restart autoneg + * @hw: pointer to hardware structure + * + * Restart autonegotiation and PHY and waits for completion. + **/ +s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; + bool autoneg = false; + ixgbe_link_speed speed; + + ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg); + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + /* Set or unset auto-negotiation 10G advertisement */ + hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_10GBASE_T_ADVERTISE; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + autoneg_reg |= IXGBE_MII_10GBASE_T_ADVERTISE; + + hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + /* Set or unset auto-negotiation 1G advertisement */ + hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX; + + hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_100_FULL) { + /* Set or unset auto-negotiation 100M advertisement */ + hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_100BASE_T_ADVERTISE; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) + autoneg_reg |= IXGBE_MII_100BASE_T_ADVERTISE; + + hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + autoneg_reg); + } + + /* Restart PHY autonegotiation and wait for completion */ + hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg); + + autoneg_reg |= IXGBE_MII_RESTART; + + hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg); + + /* Wait for autonegotiation to finish */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + /* Restart PHY autonegotiation and wait for completion */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + + autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE; + if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) + break; + } + + if (time_out == max_time_out) { + status = IXGBE_ERR_LINK_SETUP; + hw_dbg(hw, "ixgbe_setup_phy_link_tnx: time out"); + } + + return status; +} + +/** + * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version + **/ +s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, + u16 *firmware_version) +{ + s32 status = 0; + + status = hw->phy.ops.read_reg(hw, TNX_FW_REV, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + firmware_version); + + return status; +} + +/** + * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version + **/ +s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, + u16 *firmware_version) +{ + s32 status = 0; + + status = hw->phy.ops.read_reg(hw, AQ_FW_REV, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + firmware_version); + + return status; +} + +/** + * ixgbe_reset_phy_nl - Performs a PHY reset + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) +{ + u16 phy_offset, control, eword, edata, block_crc; + bool end_data = false; + u16 list_offset, data_offset; + u16 phy_data = 0; + s32 ret_val = 0; + u32 i; + + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); + + /* reset the PHY and poll for completion */ + hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, + (phy_data | IXGBE_MDIO_PHY_XS_RESET)); + + for (i = 0; i < 100; i++) { + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL, + IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data); + if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) == 0) + break; + msleep(10); + } + + if ((phy_data & IXGBE_MDIO_PHY_XS_RESET) != 0) { + hw_dbg(hw, "PHY reset did not complete.\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + + /* Get init offsets */ + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + if (ret_val != 0) + goto out; + + ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc); + data_offset++; + while (!end_data) { + /* + * Read control word from PHY init contents offset + */ + ret_val = hw->eeprom.ops.read(hw, data_offset, &eword); + control = (eword & IXGBE_CONTROL_MASK_NL) >> + IXGBE_CONTROL_SHIFT_NL; + edata = eword & IXGBE_DATA_MASK_NL; + switch (control) { + case IXGBE_DELAY_NL: + data_offset++; + hw_dbg(hw, "DELAY: %d MS\n", edata); + msleep(edata); + break; + case IXGBE_DATA_NL: + hw_dbg(hw, "DATA:\n"); + data_offset++; + hw->eeprom.ops.read(hw, data_offset++, + &phy_offset); + for (i = 0; i < edata; i++) { + hw->eeprom.ops.read(hw, data_offset, &eword); + hw->phy.ops.write_reg(hw, phy_offset, + IXGBE_TWINAX_DEV, eword); + hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword, + phy_offset); + data_offset++; + phy_offset++; + } + break; + case IXGBE_CONTROL_NL: + data_offset++; + hw_dbg(hw, "CONTROL:\n"); + if (edata == IXGBE_CONTROL_EOL_NL) { + hw_dbg(hw, "EOL\n"); + end_data = true; + } else if (edata == IXGBE_CONTROL_SOL_NL) { + hw_dbg(hw, "SOL\n"); + } else { + hw_dbg(hw, "Bad control value\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + break; + default: + hw_dbg(hw, "Bad control type\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + } + +out: + return ret_val; +} + +/** + * ixgbe_identify_module_generic - Identifies module type + * @hw: pointer to hardware structure + * + * Determines HW type and calls appropriate function. + **/ +s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_SFP_NOT_PRESENT; + + switch (hw->mac.ops.get_media_type(hw)) { + case ixgbe_media_type_fiber: + status = ixgbe_identify_sfp_module_generic(hw); + break; + + case ixgbe_media_type_fiber_qsfp: + status = ixgbe_identify_qsfp_module_generic(hw); + break; + + default: + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + status = IXGBE_ERR_SFP_NOT_PRESENT; + break; + } + + return status; +} + +/** + * ixgbe_identify_sfp_module_generic - Identifies SFP modules + * @hw: pointer to hardware structure + * + * Searches for and identifies the SFP module and assigns appropriate PHY type. + **/ +s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u32 vendor_oui = 0; + enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type; + u8 identifier = 0; + u8 comp_codes_1g = 0; + u8 comp_codes_10g = 0; + u8 oui_bytes[3] = {0, 0, 0}; + u8 cable_tech = 0; + u8 cable_spec = 0; + u16 enforce_sfp = 0; + + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) { + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + status = IXGBE_ERR_SFP_NOT_PRESENT; + goto out; + } + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_IDENTIFIER, + &identifier); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + /* LAN ID is needed for sfp_type determination */ + hw->mac.ops.set_lan_id(hw); + + if (identifier != IXGBE_SFF_IDENTIFIER_SFP) { + hw->phy.type = ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + } else { + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_1GBE_COMP_CODES, + &comp_codes_1g); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, + &comp_codes_10g); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_CABLE_TECHNOLOGY, + &cable_tech); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + /* ID Module + * ========= + * 0 SFP_DA_CU + * 1 SFP_SR + * 2 SFP_LR + * 3 SFP_DA_CORE0 - 82599-specific + * 4 SFP_DA_CORE1 - 82599-specific + * 5 SFP_SR/LR_CORE0 - 82599-specific + * 6 SFP_SR/LR_CORE1 - 82599-specific + * 7 SFP_act_lmt_DA_CORE0 - 82599-specific + * 8 SFP_act_lmt_DA_CORE1 - 82599-specific + * 9 SFP_1g_cu_CORE0 - 82599-specific + * 10 SFP_1g_cu_CORE1 - 82599-specific + * 11 SFP_1g_sx_CORE0 - 82599-specific + * 12 SFP_1g_sx_CORE1 - 82599-specific + */ + if (hw->mac.type == ixgbe_mac_82598EB) { + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) + hw->phy.sfp_type = ixgbe_sfp_type_da_cu; + else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_sr; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_lr; + else + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + } else if (hw->mac.type == ixgbe_mac_82599EB) { + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_da_cu_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_da_cu_core1; + } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) { + hw->phy.ops.read_i2c_eeprom( + hw, IXGBE_SFF_CABLE_SPEC_COMP, + &cable_spec); + if (cable_spec & + IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_da_act_lmt_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_da_act_lmt_core1; + } else { + hw->phy.sfp_type = + ixgbe_sfp_type_unknown; + } + } else if (comp_codes_10g & + (IXGBE_SFF_10GBASESR_CAPABLE | + IXGBE_SFF_10GBASELR_CAPABLE)) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_srlr_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_srlr_core1; + } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_1g_cu_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_1g_cu_core1; + } else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_1g_sx_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_1g_sx_core1; + } else { + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + } + } + + if (hw->phy.sfp_type != stored_sfp_type) + hw->phy.sfp_setup_needed = true; + + /* Determine if the SFP+ PHY is dual speed or not. */ + hw->phy.multispeed_fiber = false; + if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || + ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE))) + hw->phy.multispeed_fiber = true; + + /* Determine PHY vendor */ + if (hw->phy.type != ixgbe_phy_nl) { + hw->phy.id = identifier; + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE0, + &oui_bytes[0]); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE1, + &oui_bytes[1]); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE2, + &oui_bytes[2]); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + vendor_oui = + ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | + (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | + (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); + + switch (vendor_oui) { + case IXGBE_SFF_VENDOR_OUI_TYCO: + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) + hw->phy.type = + ixgbe_phy_sfp_passive_tyco; + break; + case IXGBE_SFF_VENDOR_OUI_FTL: + if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) + hw->phy.type = ixgbe_phy_sfp_ftl_active; + else + hw->phy.type = ixgbe_phy_sfp_ftl; + break; + case IXGBE_SFF_VENDOR_OUI_AVAGO: + hw->phy.type = ixgbe_phy_sfp_avago; + break; + case IXGBE_SFF_VENDOR_OUI_INTEL: + hw->phy.type = ixgbe_phy_sfp_intel; + break; + default: + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) + hw->phy.type = + ixgbe_phy_sfp_passive_unknown; + else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) + hw->phy.type = + ixgbe_phy_sfp_active_unknown; + else + hw->phy.type = ixgbe_phy_sfp_unknown; + break; + } + } + + /* Allow any DA cable vendor */ + if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE | + IXGBE_SFF_DA_ACTIVE_CABLE)) { + status = 0; + goto out; + } + + /* Verify supported 1G SFP modules */ + if (comp_codes_10g == 0 && + !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) { + hw->phy.type = ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + + /* Anything else 82598-based is supported */ + if (hw->mac.type == ixgbe_mac_82598EB) { + status = 0; + goto out; + } + + ixgbe_get_device_caps(hw, &enforce_sfp); + if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) && + !((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) || + (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) || + (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0) || + (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1))) { + /* Make sure we're a supported PHY type */ + if (hw->phy.type == ixgbe_phy_sfp_intel) { + status = 0; + } else { + if (hw->allow_unsupported_sfp == true) { + EWARN(hw, "WARNING: Intel (R) Network " + "Connections are quality tested " + "using Intel (R) Ethernet Optics." + " Using untested modules is not " + "supported and may cause unstable" + " operation or damage to the " + "module or the adapter. Intel " + "Corporation is not responsible " + "for any harm caused by using " + "untested modules.\n", status); + status = 0; + } else { + hw_dbg(hw, "SFP+ module not supported\n"); + hw->phy.type = + ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + } + } + } else { + status = 0; + } + } + +out: + return status; + +err_read_i2c_eeprom: + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + if (hw->phy.type != ixgbe_phy_nl) { + hw->phy.id = 0; + hw->phy.type = ixgbe_phy_unknown; + } + return IXGBE_ERR_SFP_NOT_PRESENT; +} + +/** + * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules + * @hw: pointer to hardware structure + * + * Searches for and identifies the QSFP module and assigns appropriate PHY type + **/ +s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw) +{ + s32 status = 0; + + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) { + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + status = IXGBE_ERR_SFP_NOT_PRESENT; + } + + return status; +} + + +/** + * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence + * @hw: pointer to hardware structure + * @list_offset: offset to the SFP ID list + * @data_offset: offset to the SFP data block + * + * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if + * so it returns the offsets to the phy init sequence block. + **/ +s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, + u16 *list_offset, + u16 *data_offset) +{ + u16 sfp_id; + u16 sfp_type = hw->phy.sfp_type; + + if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) + return IXGBE_ERR_SFP_NOT_SUPPORTED; + + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + return IXGBE_ERR_SFP_NOT_PRESENT; + + if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) && + (hw->phy.sfp_type == ixgbe_sfp_type_da_cu)) + return IXGBE_ERR_SFP_NOT_SUPPORTED; + + /* + * Limiting active cables and 1G Phys must be initialized as + * SR modules + */ + if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 || + sfp_type == ixgbe_sfp_type_1g_cu_core0 || + sfp_type == ixgbe_sfp_type_1g_sx_core0) + sfp_type = ixgbe_sfp_type_srlr_core0; + else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 || + sfp_type == ixgbe_sfp_type_1g_cu_core1 || + sfp_type == ixgbe_sfp_type_1g_sx_core1) + sfp_type = ixgbe_sfp_type_srlr_core1; + + /* Read offset to PHY init contents */ + hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset); + + if ((!*list_offset) || (*list_offset == 0xFFFF)) + return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; + + /* Shift offset to first ID word */ + (*list_offset)++; + + /* + * Find the matching SFP ID in the EEPROM + * and program the init sequence + */ + hw->eeprom.ops.read(hw, *list_offset, &sfp_id); + + while (sfp_id != IXGBE_PHY_INIT_END_NL) { + if (sfp_id == sfp_type) { + (*list_offset)++; + hw->eeprom.ops.read(hw, *list_offset, data_offset); + if ((!*data_offset) || (*data_offset == 0xFFFF)) { + hw_dbg(hw, "SFP+ module not supported\n"); + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } else { + break; + } + } else { + (*list_offset) += 2; + if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) + return IXGBE_ERR_PHY; + } + } + + if (sfp_id == IXGBE_PHY_INIT_END_NL) { + hw_dbg(hw, "No matching SFP+ module found\n"); + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + + return 0; +} + +/** + * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data) +{ + return hw->phy.ops.read_i2c_byte(hw, byte_offset, + IXGBE_I2C_EEPROM_DEV_ADDR, + eeprom_data); +} + +/** + * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to write + * @eeprom_data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 eeprom_data) +{ + return hw->phy.ops.write_i2c_byte(hw, byte_offset, + IXGBE_I2C_EEPROM_DEV_ADDR, + eeprom_data); +} + +/** + * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + s32 status = 0; + u32 max_retry = 10; + u32 retry = 0; + u16 swfw_mask = 0; + bool nack = 1; + *data = 0; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + swfw_mask = IXGBE_GSSR_PHY1_SM; + else + swfw_mask = IXGBE_GSSR_PHY0_SM; + + do { + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) + != 0) { + status = IXGBE_ERR_SWFW_SYNC; + goto read_byte_out; + } + + ixgbe_i2c_start(hw); + + /* Device Address and write indication */ + status = ixgbe_clock_out_i2c_byte(hw, dev_addr); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_byte(hw, byte_offset); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + ixgbe_i2c_start(hw); + + /* Device Address and read indication */ + status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1)); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_in_i2c_byte(hw, data); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_bit(hw, nack); + if (status != 0) + goto fail; + + ixgbe_i2c_stop(hw); + break; + +fail: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(100); + ixgbe_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + hw_dbg(hw, "I2C byte read error - Retrying.\n"); + else + hw_dbg(hw, "I2C byte read error.\n"); + + } while (retry < max_retry); + + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + +read_byte_out: + return status; +} + +/** + * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + s32 status = 0; + u32 max_retry = 1; + u32 retry = 0; + u16 swfw_mask = 0; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + swfw_mask = IXGBE_GSSR_PHY1_SM; + else + swfw_mask = IXGBE_GSSR_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) { + status = IXGBE_ERR_SWFW_SYNC; + goto write_byte_out; + } + + do { + ixgbe_i2c_start(hw); + + status = ixgbe_clock_out_i2c_byte(hw, dev_addr); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_byte(hw, byte_offset); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_byte(hw, data); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + ixgbe_i2c_stop(hw); + break; + +fail: + ixgbe_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + hw_dbg(hw, "I2C byte write error - Retrying.\n"); + else + hw_dbg(hw, "I2C byte write error.\n"); + } while (retry < max_retry); + + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + +write_byte_out: + return status; +} + +/** + * ixgbe_i2c_start - Sets I2C start condition + * @hw: pointer to hardware structure + * + * Sets I2C start condition (High -> Low on SDA while SCL is High) + **/ +static void ixgbe_i2c_start(struct ixgbe_hw *hw) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + /* Start condition must begin with data and clock high */ + ixgbe_set_i2c_data(hw, &i2cctl, 1); + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for start condition (4.7us) */ + udelay(IXGBE_I2C_T_SU_STA); + + ixgbe_set_i2c_data(hw, &i2cctl, 0); + + /* Hold time for start condition (4us) */ + udelay(IXGBE_I2C_T_HD_STA); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + udelay(IXGBE_I2C_T_LOW); + +} + +/** + * ixgbe_i2c_stop - Sets I2C stop condition + * @hw: pointer to hardware structure + * + * Sets I2C stop condition (Low -> High on SDA while SCL is High) + **/ +static void ixgbe_i2c_stop(struct ixgbe_hw *hw) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + /* Stop condition must begin with data low and clock high */ + ixgbe_set_i2c_data(hw, &i2cctl, 0); + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for stop condition (4us) */ + udelay(IXGBE_I2C_T_SU_STO); + + ixgbe_set_i2c_data(hw, &i2cctl, 1); + + /* bus free time between stop and start (4.7us)*/ + udelay(IXGBE_I2C_T_BUF); +} + +/** + * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte to clock in + * + * Clocks in one byte data via I2C data/clock + **/ +static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data) +{ + s32 i; + bool bit = 0; + + for (i = 7; i >= 0; i--) { + ixgbe_clock_in_i2c_bit(hw, &bit); + *data |= bit << i; + } + + return 0; +} + +/** + * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte clocked out + * + * Clocks out one byte data via I2C data/clock + **/ +static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) +{ + s32 status = 0; + s32 i; + u32 i2cctl; + bool bit = 0; + + for (i = 7; i >= 0; i--) { + bit = (data >> i) & 0x1; + status = ixgbe_clock_out_i2c_bit(hw, bit); + + if (status != 0) + break; + } + + /* Release SDA line (set high) */ + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + i2cctl |= IXGBE_I2C_DATA_OUT; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, i2cctl); + IXGBE_WRITE_FLUSH(hw); + + return status; +} + +/** + * ixgbe_get_i2c_ack - Polls for I2C ACK + * @hw: pointer to hardware structure + * + * Clocks in/out one bit via I2C data/clock + **/ +static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 i = 0; + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 timeout = 10; + bool ack = 1; + + ixgbe_raise_i2c_clk(hw, &i2cctl); + + + /* Minimum high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + /* Poll for ACK. Note that ACK in I2C spec is + * transition from 1 to 0 */ + for (i = 0; i < timeout; i++) { + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + ack = ixgbe_get_i2c_data(&i2cctl); + + udelay(1); + if (ack == 0) + break; + } + + if (ack == 1) { + hw_dbg(hw, "I2C ack was not received.\n"); + status = IXGBE_ERR_I2C; + } + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + udelay(IXGBE_I2C_T_LOW); + + return status; +} + +/** + * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: read data value + * + * Clocks in one bit via I2C data/clock + **/ +static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + *data = ixgbe_get_i2c_data(&i2cctl); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + udelay(IXGBE_I2C_T_LOW); + + return 0; +} + +/** + * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: data value to write + * + * Clocks out one bit via I2C data/clock + **/ +static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) +{ + s32 status; + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + status = ixgbe_set_i2c_data(hw, &i2cctl, data); + if (status == 0) { + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us. + * This also takes care of the data hold time. + */ + udelay(IXGBE_I2C_T_LOW); + } else { + status = IXGBE_ERR_I2C; + hw_dbg(hw, "I2C data was not set to %X\n", data); + } + + return status; +} +/** + * ixgbe_raise_i2c_clk - Raises the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Raises the I2C clock line '0'->'1' + **/ +static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) +{ + u32 i = 0; + u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT; + u32 i2cctl_r = 0; + + for (i = 0; i < timeout; i++) { + *i2cctl |= IXGBE_I2C_CLK_OUT; + + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_FLUSH(hw); + /* SCL rise time (1000ns) */ + udelay(IXGBE_I2C_T_RISE); + + i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + if (i2cctl_r & IXGBE_I2C_CLK_IN) + break; + } +} + +/** + * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Lowers the I2C clock line '1'->'0' + **/ +static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) +{ + + *i2cctl &= ~IXGBE_I2C_CLK_OUT; + + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_FLUSH(hw); + + /* SCL fall time (300ns) */ + udelay(IXGBE_I2C_T_FALL); +} + +/** + * ixgbe_set_i2c_data - Sets the I2C data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * @data: I2C data value (0 or 1) to set + * + * Sets the I2C data bit + **/ +static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) +{ + s32 status = 0; + + if (data) + *i2cctl |= IXGBE_I2C_DATA_OUT; + else + *i2cctl &= ~IXGBE_I2C_DATA_OUT; + + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_FLUSH(hw); + + /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ + udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA); + + /* Verify data was set correctly */ + *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + if (data != ixgbe_get_i2c_data(i2cctl)) { + status = IXGBE_ERR_I2C; + hw_dbg(hw, "Error - I2C data was not set to %X.\n", data); + } + + return status; +} + +/** + * ixgbe_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Returns the I2C data bit value + **/ +static bool ixgbe_get_i2c_data(u32 *i2cctl) +{ + bool data; + + if (*i2cctl & IXGBE_I2C_DATA_IN) + data = 1; + else + data = 0; + + return data; +} + +/** + * ixgbe_i2c_bus_clear - Clears the I2C bus + * @hw: pointer to hardware structure + * + * Clears the I2C bus by sending nine clock pulses. + * Used when data line is stuck low. + **/ +void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 i; + + ixgbe_i2c_start(hw); + + ixgbe_set_i2c_data(hw, &i2cctl, 1); + + for (i = 0; i < 9; i++) { + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Min high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Min low period of clock is 4.7us*/ + udelay(IXGBE_I2C_T_LOW); + } + + ixgbe_i2c_start(hw); + + /* Put the i2c bus back to default state */ + ixgbe_i2c_stop(hw); +} + +/** + * ixgbe_tn_check_overtemp - Checks if an overtemp occurred. + * @hw: pointer to hardware structure + * + * Checks if the LASI temp alarm status was triggered due to overtemp + **/ +s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) +{ + s32 status = 0; + u16 phy_data = 0; + + if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM) + goto out; + + /* Check that the LASI temp alarm status was triggered */ + hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_data); + + if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM)) + goto out; + + status = IXGBE_ERR_OVERTEMP; +out: + return status; +} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.h new file mode 100644 index 00000000..6baa9acb --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_phy.h @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_PHY_H_ +#define _IXGBE_PHY_H_ + +#include "ixgbe_type.h" +#define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0 + +/* EEPROM byte offsets */ +#define IXGBE_SFF_IDENTIFIER 0x0 +#define IXGBE_SFF_IDENTIFIER_SFP 0x3 +#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25 +#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26 +#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27 +#define IXGBE_SFF_1GBE_COMP_CODES 0x6 +#define IXGBE_SFF_10GBE_COMP_CODES 0x3 +#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8 +#define IXGBE_SFF_CABLE_SPEC_COMP 0x3C + +/* Bitmasks */ +#define IXGBE_SFF_DA_PASSIVE_CABLE 0x4 +#define IXGBE_SFF_DA_ACTIVE_CABLE 0x8 +#define IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING 0x4 +#define IXGBE_SFF_1GBASESX_CAPABLE 0x1 +#define IXGBE_SFF_1GBASELX_CAPABLE 0x2 +#define IXGBE_SFF_1GBASET_CAPABLE 0x8 +#define IXGBE_SFF_10GBASESR_CAPABLE 0x10 +#define IXGBE_SFF_10GBASELR_CAPABLE 0x20 +#define IXGBE_I2C_EEPROM_READ_MASK 0x100 +#define IXGBE_I2C_EEPROM_STATUS_MASK 0x3 +#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0 +#define IXGBE_I2C_EEPROM_STATUS_PASS 0x1 +#define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2 +#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3 + +/* Flow control defines */ +#define IXGBE_TAF_SYM_PAUSE 0x400 +#define IXGBE_TAF_ASM_PAUSE 0x800 + +/* Bit-shift macros */ +#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24 +#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16 +#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8 + +/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */ +#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600 +#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500 +#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00 +#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100 + +/* I2C SDA and SCL timing parameters for standard mode */ +#define IXGBE_I2C_T_HD_STA 4 +#define IXGBE_I2C_T_LOW 5 +#define IXGBE_I2C_T_HIGH 4 +#define IXGBE_I2C_T_SU_STA 5 +#define IXGBE_I2C_T_HD_DATA 5 +#define IXGBE_I2C_T_SU_DATA 1 +#define IXGBE_I2C_T_RISE 1 +#define IXGBE_I2C_T_FALL 1 +#define IXGBE_I2C_T_SU_STO 4 +#define IXGBE_I2C_T_BUF 5 + +#define IXGBE_TN_LASI_STATUS_REG 0x9005 +#define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008 + +s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw); +bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr); +enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id); +s32 ixgbe_get_phy_id(struct ixgbe_hw *hw); +s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw); +s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw); +s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data); +s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data); +s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw); +s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg); + +/* PHY specific */ +s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *link_up); +s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw); +s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, + u16 *firmware_version); +s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, + u16 *firmware_version); + +s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw); +s32 ixgbe_identify_module_generic(struct ixgbe_hw *hw); +s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw); +s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw); +s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, + u16 *list_offset, + u16 *data_offset); +s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw); +s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); +s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data); +s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 eeprom_data); +void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw); +#endif /* _IXGBE_PHY_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_type.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_type.h new file mode 100644 index 00000000..0689590e --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_type.h @@ -0,0 +1,3239 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_TYPE_H_ +#define _IXGBE_TYPE_H_ + +#include "ixgbe_osdep.h" + + +/* Vendor ID */ +#define IXGBE_INTEL_VENDOR_ID 0x8086 + +/* Device IDs */ +#define IXGBE_DEV_ID_82598 0x10B6 +#define IXGBE_DEV_ID_82598_BX 0x1508 +#define IXGBE_DEV_ID_82598AF_DUAL_PORT 0x10C6 +#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7 +#define IXGBE_DEV_ID_82598AT 0x10C8 +#define IXGBE_DEV_ID_82598AT2 0x150B +#define IXGBE_DEV_ID_82598EB_SFP_LOM 0x10DB +#define IXGBE_DEV_ID_82598EB_CX4 0x10DD +#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC +#define IXGBE_DEV_ID_82598_DA_DUAL_PORT 0x10F1 +#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1 +#define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4 +#define IXGBE_DEV_ID_82599_KX4 0x10F7 +#define IXGBE_DEV_ID_82599_KX4_MEZZ 0x1514 +#define IXGBE_DEV_ID_82599_KR 0x1517 +#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8 +#define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ 0x000C +#define IXGBE_DEV_ID_82599_CX4 0x10F9 +#define IXGBE_DEV_ID_82599_SFP 0x10FB +#define IXGBE_SUBDEV_ID_82599_SFP 0x11A9 +#define IXGBE_SUBDEV_ID_82599_560FLR 0x17D0 +#define IXGBE_DEV_ID_82599_BACKPLANE_FCOE 0x152A +#define IXGBE_DEV_ID_82599_SFP_FCOE 0x1529 +#define IXGBE_DEV_ID_82599_SFP_EM 0x1507 +#define IXGBE_DEV_ID_82599_SFP_SF2 0x154D +#define IXGBE_DEV_ID_82599_QSFP_SF_QP 0x1558 +#define IXGBE_DEV_ID_82599EN_SFP 0x1557 +#define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC +#define IXGBE_DEV_ID_82599_T3_LOM 0x151C +#define IXGBE_DEV_ID_82599_LS 0x154F +#define IXGBE_DEV_ID_X540T 0x1528 + +/* General Registers */ +#define IXGBE_CTRL 0x00000 +#define IXGBE_STATUS 0x00008 +#define IXGBE_CTRL_EXT 0x00018 +#define IXGBE_ESDP 0x00020 +#define IXGBE_EODSDP 0x00028 +#define IXGBE_I2CCTL 0x00028 +#define IXGBE_PHY_GPIO 0x00028 +#define IXGBE_MAC_GPIO 0x00030 +#define IXGBE_PHYINT_STATUS0 0x00100 +#define IXGBE_PHYINT_STATUS1 0x00104 +#define IXGBE_PHYINT_STATUS2 0x00108 +#define IXGBE_LEDCTL 0x00200 +#define IXGBE_FRTIMER 0x00048 +#define IXGBE_TCPTIMER 0x0004C +#define IXGBE_CORESPARE 0x00600 +#define IXGBE_EXVET 0x05078 + +/* NVM Registers */ +#define IXGBE_EEC 0x10010 +#define IXGBE_EERD 0x10014 +#define IXGBE_EEWR 0x10018 +#define IXGBE_FLA 0x1001C +#define IXGBE_EEMNGCTL 0x10110 +#define IXGBE_EEMNGDATA 0x10114 +#define IXGBE_FLMNGCTL 0x10118 +#define IXGBE_FLMNGDATA 0x1011C +#define IXGBE_FLMNGCNT 0x10120 +#define IXGBE_FLOP 0x1013C +#define IXGBE_GRC 0x10200 +#define IXGBE_SRAMREL 0x10210 +#define IXGBE_PHYDBG 0x10218 + +/* General Receive Control */ +#define IXGBE_GRC_MNG 0x00000001 /* Manageability Enable */ +#define IXGBE_GRC_APME 0x00000002 /* APM enabled in EEPROM */ + +#define IXGBE_VPDDIAG0 0x10204 +#define IXGBE_VPDDIAG1 0x10208 + +/* I2CCTL Bit Masks */ +#define IXGBE_I2C_CLK_IN 0x00000001 +#define IXGBE_I2C_CLK_OUT 0x00000002 +#define IXGBE_I2C_DATA_IN 0x00000004 +#define IXGBE_I2C_DATA_OUT 0x00000008 +#define IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT 500 + +#define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8 +#define IXGBE_EMC_INTERNAL_DATA 0x00 +#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20 +#define IXGBE_EMC_DIODE1_DATA 0x01 +#define IXGBE_EMC_DIODE1_THERM_LIMIT 0x19 +#define IXGBE_EMC_DIODE2_DATA 0x23 +#define IXGBE_EMC_DIODE2_THERM_LIMIT 0x1A + +#define IXGBE_MAX_SENSORS 3 + +struct ixgbe_thermal_diode_data { + u8 location; + u8 temp; + u8 caution_thresh; + u8 max_op_thresh; +}; + +struct ixgbe_thermal_sensor_data { + struct ixgbe_thermal_diode_data sensor[IXGBE_MAX_SENSORS]; +}; + +/* Interrupt Registers */ +#define IXGBE_EICR 0x00800 +#define IXGBE_EICS 0x00808 +#define IXGBE_EIMS 0x00880 +#define IXGBE_EIMC 0x00888 +#define IXGBE_EIAC 0x00810 +#define IXGBE_EIAM 0x00890 +#define IXGBE_EICS_EX(_i) (0x00A90 + (_i) * 4) +#define IXGBE_EIMS_EX(_i) (0x00AA0 + (_i) * 4) +#define IXGBE_EIMC_EX(_i) (0x00AB0 + (_i) * 4) +#define IXGBE_EIAM_EX(_i) (0x00AD0 + (_i) * 4) +/* 82599 EITR is only 12 bits, with the lower 3 always zero */ +/* + * 82598 EITR is 16 bits but set the limits based on the max + * supported by all ixgbe hardware + */ +#define IXGBE_MAX_INT_RATE 488281 +#define IXGBE_MIN_INT_RATE 956 +#define IXGBE_MAX_EITR 0x00000FF8 +#define IXGBE_MIN_EITR 8 +#define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : \ + (0x012300 + (((_i) - 24) * 4))) +#define IXGBE_EITR_ITR_INT_MASK 0x00000FF8 +#define IXGBE_EITR_LLI_MOD 0x00008000 +#define IXGBE_EITR_CNT_WDIS 0x80000000 +#define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */ +#define IXGBE_IVAR_MISC 0x00A00 /* misc MSI-X interrupt causes */ +#define IXGBE_EITRSEL 0x00894 +#define IXGBE_MSIXT 0x00000 /* MSI-X Table. 0x0000 - 0x01C */ +#define IXGBE_MSIXPBA 0x02000 /* MSI-X Pending bit array */ +#define IXGBE_PBACL(_i) (((_i) == 0) ? (0x11068) : (0x110C0 + ((_i) * 4))) +#define IXGBE_GPIE 0x00898 + +/* Flow Control Registers */ +#define IXGBE_FCADBUL 0x03210 +#define IXGBE_FCADBUH 0x03214 +#define IXGBE_FCAMACL 0x04328 +#define IXGBE_FCAMACH 0x0432C +#define IXGBE_FCRTH_82599(_i) (0x03260 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_FCRTL_82599(_i) (0x03220 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_PFCTOP 0x03008 +#define IXGBE_FCTTV(_i) (0x03200 + ((_i) * 4)) /* 4 of these (0-3) */ +#define IXGBE_FCRTL(_i) (0x03220 + ((_i) * 8)) /* 8 of these (0-7) */ +#define IXGBE_FCRTH(_i) (0x03260 + ((_i) * 8)) /* 8 of these (0-7) */ +#define IXGBE_FCRTV 0x032A0 +#define IXGBE_FCCFG 0x03D00 +#define IXGBE_TFCS 0x0CE00 + +/* Receive DMA Registers */ +#define IXGBE_RDBAL(_i) (((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : \ + (0x0D000 + (((_i) - 64) * 0x40))) +#define IXGBE_RDBAH(_i) (((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : \ + (0x0D004 + (((_i) - 64) * 0x40))) +#define IXGBE_RDLEN(_i) (((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : \ + (0x0D008 + (((_i) - 64) * 0x40))) +#define IXGBE_RDH(_i) (((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : \ + (0x0D010 + (((_i) - 64) * 0x40))) +#define IXGBE_RDT(_i) (((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : \ + (0x0D018 + (((_i) - 64) * 0x40))) +#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \ + (0x0D028 + (((_i) - 64) * 0x40))) +#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \ + (0x0D02C + (((_i) - 64) * 0x40))) +#define IXGBE_RSCDBU 0x03028 +#define IXGBE_RDDCC 0x02F20 +#define IXGBE_RXMEMWRAP 0x03190 +#define IXGBE_STARCTRL 0x03024 +/* + * Split and Replication Receive Control Registers + * 00-15 : 0x02100 + n*4 + * 16-64 : 0x01014 + n*0x40 + * 64-127: 0x0D014 + (n-64)*0x40 + */ +#define IXGBE_SRRCTL(_i) (((_i) <= 15) ? (0x02100 + ((_i) * 4)) : \ + (((_i) < 64) ? (0x01014 + ((_i) * 0x40)) : \ + (0x0D014 + (((_i) - 64) * 0x40)))) +/* + * Rx DCA Control Register: + * 00-15 : 0x02200 + n*4 + * 16-64 : 0x0100C + n*0x40 + * 64-127: 0x0D00C + (n-64)*0x40 + */ +#define IXGBE_DCA_RXCTRL(_i) (((_i) <= 15) ? (0x02200 + ((_i) * 4)) : \ + (((_i) < 64) ? (0x0100C + ((_i) * 0x40)) : \ + (0x0D00C + (((_i) - 64) * 0x40)))) +#define IXGBE_RDRXCTL 0x02F00 +#define IXGBE_RDRXCTL_RSC_PUSH 0x80 +/* 8 of these 0x03C00 - 0x03C1C */ +#define IXGBE_RXPBSIZE(_i) (0x03C00 + ((_i) * 4)) +#define IXGBE_RXCTRL 0x03000 +#define IXGBE_DROPEN 0x03D04 +#define IXGBE_RXPBSIZE_SHIFT 10 + +/* Receive Registers */ +#define IXGBE_RXCSUM 0x05000 +#define IXGBE_RFCTL 0x05008 +#define IXGBE_DRECCCTL 0x02F08 +#define IXGBE_DRECCCTL_DISABLE 0 +#define IXGBE_DRECCCTL2 0x02F8C + +/* Multicast Table Array - 128 entries */ +#define IXGBE_MTA(_i) (0x05200 + ((_i) * 4)) +#define IXGBE_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ + (0x0A200 + ((_i) * 8))) +#define IXGBE_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ + (0x0A204 + ((_i) * 8))) +#define IXGBE_MPSAR_LO(_i) (0x0A600 + ((_i) * 8)) +#define IXGBE_MPSAR_HI(_i) (0x0A604 + ((_i) * 8)) +/* Packet split receive type */ +#define IXGBE_PSRTYPE(_i) (((_i) <= 15) ? (0x05480 + ((_i) * 4)) : \ + (0x0EA00 + ((_i) * 4))) +/* array of 4096 1-bit vlan filters */ +#define IXGBE_VFTA(_i) (0x0A000 + ((_i) * 4)) +/*array of 4096 4-bit vlan vmdq indices */ +#define IXGBE_VFTAVIND(_j, _i) (0x0A200 + ((_j) * 0x200) + ((_i) * 4)) +#define IXGBE_FCTRL 0x05080 +#define IXGBE_VLNCTRL 0x05088 +#define IXGBE_MCSTCTRL 0x05090 +#define IXGBE_MRQC 0x05818 +#define IXGBE_SAQF(_i) (0x0E000 + ((_i) * 4)) /* Source Address Queue Filter */ +#define IXGBE_DAQF(_i) (0x0E200 + ((_i) * 4)) /* Dest. Address Queue Filter */ +#define IXGBE_SDPQF(_i) (0x0E400 + ((_i) * 4)) /* Src Dest. Addr Queue Filter */ +#define IXGBE_FTQF(_i) (0x0E600 + ((_i) * 4)) /* Five Tuple Queue Filter */ +#define IXGBE_ETQF(_i) (0x05128 + ((_i) * 4)) /* EType Queue Filter */ +#define IXGBE_ETQS(_i) (0x0EC00 + ((_i) * 4)) /* EType Queue Select */ +#define IXGBE_SYNQF 0x0EC30 /* SYN Packet Queue Filter */ +#define IXGBE_RQTC 0x0EC70 +#define IXGBE_MTQC 0x08120 +#define IXGBE_VLVF(_i) (0x0F100 + ((_i) * 4)) /* 64 of these (0-63) */ +#define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4)) /* 128 of these (0-127) */ +#define IXGBE_VMVIR(_i) (0x08000 + ((_i) * 4)) /* 64 of these (0-63) */ +#define IXGBE_VT_CTL 0x051B0 +#define IXGBE_PFMAILBOX(_i) (0x04B00 + (4 * (_i))) /* 64 total */ +/* 64 Mailboxes, 16 DW each */ +#define IXGBE_PFMBMEM(_i) (0x13000 + (64 * (_i))) +#define IXGBE_PFMBICR(_i) (0x00710 + (4 * (_i))) /* 4 total */ +#define IXGBE_PFMBIMR(_i) (0x00720 + (4 * (_i))) /* 4 total */ +#define IXGBE_VFRE(_i) (0x051E0 + ((_i) * 4)) +#define IXGBE_VFTE(_i) (0x08110 + ((_i) * 4)) +#define IXGBE_VMECM(_i) (0x08790 + ((_i) * 4)) +#define IXGBE_QDE 0x2F04 +#define IXGBE_VMTXSW(_i) (0x05180 + ((_i) * 4)) /* 2 total */ +#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */ +#define IXGBE_UTA(_i) (0x0F400 + ((_i) * 4)) +#define IXGBE_MRCTL(_i) (0x0F600 + ((_i) * 4)) +#define IXGBE_VMRVLAN(_i) (0x0F610 + ((_i) * 4)) +#define IXGBE_VMRVM(_i) (0x0F630 + ((_i) * 4)) +#define IXGBE_L34T_IMIR(_i) (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/ +#define IXGBE_RXFECCERR0 0x051B8 +#define IXGBE_LLITHRESH 0x0EC90 +#define IXGBE_IMIR(_i) (0x05A80 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_IMIRVP 0x05AC0 +#define IXGBE_VMD_CTL 0x0581C +#define IXGBE_RETA(_i) (0x05C00 + ((_i) * 4)) /* 32 of these (0-31) */ +#define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* 10 of these (0-9) */ + +/* Flow Director registers */ +#define IXGBE_FDIRCTRL 0x0EE00 +#define IXGBE_FDIRHKEY 0x0EE68 +#define IXGBE_FDIRSKEY 0x0EE6C +#define IXGBE_FDIRDIP4M 0x0EE3C +#define IXGBE_FDIRSIP4M 0x0EE40 +#define IXGBE_FDIRTCPM 0x0EE44 +#define IXGBE_FDIRUDPM 0x0EE48 +#define IXGBE_FDIRIP6M 0x0EE74 +#define IXGBE_FDIRM 0x0EE70 + +/* Flow Director Stats registers */ +#define IXGBE_FDIRFREE 0x0EE38 +#define IXGBE_FDIRLEN 0x0EE4C +#define IXGBE_FDIRUSTAT 0x0EE50 +#define IXGBE_FDIRFSTAT 0x0EE54 +#define IXGBE_FDIRMATCH 0x0EE58 +#define IXGBE_FDIRMISS 0x0EE5C + +/* Flow Director Programming registers */ +#define IXGBE_FDIRSIPv6(_i) (0x0EE0C + ((_i) * 4)) /* 3 of these (0-2) */ +#define IXGBE_FDIRIPSA 0x0EE18 +#define IXGBE_FDIRIPDA 0x0EE1C +#define IXGBE_FDIRPORT 0x0EE20 +#define IXGBE_FDIRVLAN 0x0EE24 +#define IXGBE_FDIRHASH 0x0EE28 +#define IXGBE_FDIRCMD 0x0EE2C + +/* Transmit DMA registers */ +#define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40)) /* 32 of them (0-31)*/ +#define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40)) +#define IXGBE_TDLEN(_i) (0x06008 + ((_i) * 0x40)) +#define IXGBE_TDH(_i) (0x06010 + ((_i) * 0x40)) +#define IXGBE_TDT(_i) (0x06018 + ((_i) * 0x40)) +#define IXGBE_TXDCTL(_i) (0x06028 + ((_i) * 0x40)) +#define IXGBE_TDWBAL(_i) (0x06038 + ((_i) * 0x40)) +#define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40)) +#define IXGBE_DTXCTL 0x07E00 + +#define IXGBE_DMATXCTL 0x04A80 +#define IXGBE_PFVFSPOOF(_i) (0x08200 + ((_i) * 4)) /* 8 of these 0 - 7 */ +#define IXGBE_PFDTXGSWC 0x08220 +#define IXGBE_DTXMXSZRQ 0x08100 +#define IXGBE_DTXTCPFLGL 0x04A88 +#define IXGBE_DTXTCPFLGH 0x04A8C +#define IXGBE_LBDRPEN 0x0CA00 +#define IXGBE_TXPBTHRESH(_i) (0x04950 + ((_i) * 4)) /* 8 of these 0 - 7 */ + +#define IXGBE_DMATXCTL_TE 0x1 /* Transmit Enable */ +#define IXGBE_DMATXCTL_NS 0x2 /* No Snoop LSO hdr buffer */ +#define IXGBE_DMATXCTL_GDV 0x8 /* Global Double VLAN */ +#define IXGBE_DMATXCTL_VT_SHIFT 16 /* VLAN EtherType */ + +#define IXGBE_PFDTXGSWC_VT_LBEN 0x1 /* Local L2 VT switch enable */ + +/* Anti-spoofing defines */ +#define IXGBE_SPOOF_MACAS_MASK 0xFF +#define IXGBE_SPOOF_VLANAS_MASK 0xFF00 +#define IXGBE_SPOOF_VLANAS_SHIFT 8 +#define IXGBE_PFVFSPOOF_REG_COUNT 8 +/* 16 of these (0-15) */ +#define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4)) +/* Tx DCA Control register : 128 of these (0-127) */ +#define IXGBE_DCA_TXCTRL_82599(_i) (0x0600C + ((_i) * 0x40)) +#define IXGBE_TIPG 0x0CB00 +#define IXGBE_TXPBSIZE(_i) (0x0CC00 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_MNGTXMAP 0x0CD10 +#define IXGBE_TIPG_FIBER_DEFAULT 3 +#define IXGBE_TXPBSIZE_SHIFT 10 + +/* Wake up registers */ +#define IXGBE_WUC 0x05800 +#define IXGBE_WUFC 0x05808 +#define IXGBE_WUS 0x05810 +#define IXGBE_IPAV 0x05838 +#define IXGBE_IP4AT 0x05840 /* IPv4 table 0x5840-0x5858 */ +#define IXGBE_IP6AT 0x05880 /* IPv6 table 0x5880-0x588F */ + +#define IXGBE_WUPL 0x05900 +#define IXGBE_WUPM 0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */ +#define IXGBE_FHFT(_n) (0x09000 + (_n * 0x100)) /* Flex host filter table */ +/* Ext Flexible Host Filter Table */ +#define IXGBE_FHFT_EXT(_n) (0x09800 + (_n * 0x100)) + +#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX 4 +#define IXGBE_EXT_FLEXIBLE_FILTER_COUNT_MAX 2 + +/* Each Flexible Filter is at most 128 (0x80) bytes in length */ +#define IXGBE_FLEXIBLE_FILTER_SIZE_MAX 128 +#define IXGBE_FHFT_LENGTH_OFFSET 0xFC /* Length byte in FHFT */ +#define IXGBE_FHFT_LENGTH_MASK 0x0FF /* Length in lower byte */ + +/* Definitions for power management and wakeup registers */ +/* Wake Up Control */ +#define IXGBE_WUC_PME_EN 0x00000002 /* PME Enable */ +#define IXGBE_WUC_PME_STATUS 0x00000004 /* PME Status */ +#define IXGBE_WUC_WKEN 0x00000010 /* Enable PE_WAKE_N pin assertion */ + +/* Wake Up Filter Control */ +#define IXGBE_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define IXGBE_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define IXGBE_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define IXGBE_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ +#define IXGBE_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ +#define IXGBE_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ +#define IXGBE_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ +#define IXGBE_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ +#define IXGBE_WUFC_MNG 0x00000100 /* Directed Mgmt Packet Wakeup Enable */ + +#define IXGBE_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ +#define IXGBE_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ +#define IXGBE_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ +#define IXGBE_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ +#define IXGBE_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ +#define IXGBE_WUFC_FLX4 0x00100000 /* Flexible Filter 4 Enable */ +#define IXGBE_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */ +#define IXGBE_WUFC_FLX_FILTERS 0x000F0000 /* Mask for 4 flex filters */ +/* Mask for Ext. flex filters */ +#define IXGBE_WUFC_EXT_FLX_FILTERS 0x00300000 +#define IXGBE_WUFC_ALL_FILTERS 0x003F00FF /* Mask for all wakeup filters */ +#define IXGBE_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */ + +/* Wake Up Status */ +#define IXGBE_WUS_LNKC IXGBE_WUFC_LNKC +#define IXGBE_WUS_MAG IXGBE_WUFC_MAG +#define IXGBE_WUS_EX IXGBE_WUFC_EX +#define IXGBE_WUS_MC IXGBE_WUFC_MC +#define IXGBE_WUS_BC IXGBE_WUFC_BC +#define IXGBE_WUS_ARP IXGBE_WUFC_ARP +#define IXGBE_WUS_IPV4 IXGBE_WUFC_IPV4 +#define IXGBE_WUS_IPV6 IXGBE_WUFC_IPV6 +#define IXGBE_WUS_MNG IXGBE_WUFC_MNG +#define IXGBE_WUS_FLX0 IXGBE_WUFC_FLX0 +#define IXGBE_WUS_FLX1 IXGBE_WUFC_FLX1 +#define IXGBE_WUS_FLX2 IXGBE_WUFC_FLX2 +#define IXGBE_WUS_FLX3 IXGBE_WUFC_FLX3 +#define IXGBE_WUS_FLX4 IXGBE_WUFC_FLX4 +#define IXGBE_WUS_FLX5 IXGBE_WUFC_FLX5 +#define IXGBE_WUS_FLX_FILTERS IXGBE_WUFC_FLX_FILTERS + +/* Wake Up Packet Length */ +#define IXGBE_WUPL_LENGTH_MASK 0xFFFF + +/* DCB registers */ +#define IXGBE_DCB_MAX_TRAFFIC_CLASS 8 +#define IXGBE_RMCS 0x03D00 +#define IXGBE_DPMCS 0x07F40 +#define IXGBE_PDPMCS 0x0CD00 +#define IXGBE_RUPPBMR 0x050A0 +#define IXGBE_RT2CR(_i) (0x03C20 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RT2SR(_i) (0x03C40 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_TDTQ2TCCR(_i) (0x0602C + ((_i) * 0x40)) /* 8 of these (0-7) */ +#define IXGBE_TDTQ2TCSR(_i) (0x0622C + ((_i) * 0x40)) /* 8 of these (0-7) */ +#define IXGBE_TDPT2TCCR(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_TDPT2TCSR(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */ + + +/* Security Control Registers */ +#define IXGBE_SECTXCTRL 0x08800 +#define IXGBE_SECTXSTAT 0x08804 +#define IXGBE_SECTXBUFFAF 0x08808 +#define IXGBE_SECTXMINIFG 0x08810 +#define IXGBE_SECRXCTRL 0x08D00 +#define IXGBE_SECRXSTAT 0x08D04 + +/* Security Bit Fields and Masks */ +#define IXGBE_SECTXCTRL_SECTX_DIS 0x00000001 +#define IXGBE_SECTXCTRL_TX_DIS 0x00000002 +#define IXGBE_SECTXCTRL_STORE_FORWARD 0x00000004 + +#define IXGBE_SECTXSTAT_SECTX_RDY 0x00000001 +#define IXGBE_SECTXSTAT_ECC_TXERR 0x00000002 + +#define IXGBE_SECRXCTRL_SECRX_DIS 0x00000001 +#define IXGBE_SECRXCTRL_RX_DIS 0x00000002 + +#define IXGBE_SECRXSTAT_SECRX_RDY 0x00000001 +#define IXGBE_SECRXSTAT_ECC_RXERR 0x00000002 + +/* LinkSec (MacSec) Registers */ +#define IXGBE_LSECTXCAP 0x08A00 +#define IXGBE_LSECRXCAP 0x08F00 +#define IXGBE_LSECTXCTRL 0x08A04 +#define IXGBE_LSECTXSCL 0x08A08 /* SCI Low */ +#define IXGBE_LSECTXSCH 0x08A0C /* SCI High */ +#define IXGBE_LSECTXSA 0x08A10 +#define IXGBE_LSECTXPN0 0x08A14 +#define IXGBE_LSECTXPN1 0x08A18 +#define IXGBE_LSECTXKEY0(_n) (0x08A1C + (4 * (_n))) /* 4 of these (0-3) */ +#define IXGBE_LSECTXKEY1(_n) (0x08A2C + (4 * (_n))) /* 4 of these (0-3) */ +#define IXGBE_LSECRXCTRL 0x08F04 +#define IXGBE_LSECRXSCL 0x08F08 +#define IXGBE_LSECRXSCH 0x08F0C +#define IXGBE_LSECRXSA(_i) (0x08F10 + (4 * (_i))) /* 2 of these (0-1) */ +#define IXGBE_LSECRXPN(_i) (0x08F18 + (4 * (_i))) /* 2 of these (0-1) */ +#define IXGBE_LSECRXKEY(_n, _m) (0x08F20 + ((0x10 * (_n)) + (4 * (_m)))) +#define IXGBE_LSECTXUT 0x08A3C /* OutPktsUntagged */ +#define IXGBE_LSECTXPKTE 0x08A40 /* OutPktsEncrypted */ +#define IXGBE_LSECTXPKTP 0x08A44 /* OutPktsProtected */ +#define IXGBE_LSECTXOCTE 0x08A48 /* OutOctetsEncrypted */ +#define IXGBE_LSECTXOCTP 0x08A4C /* OutOctetsProtected */ +#define IXGBE_LSECRXUT 0x08F40 /* InPktsUntagged/InPktsNoTag */ +#define IXGBE_LSECRXOCTD 0x08F44 /* InOctetsDecrypted */ +#define IXGBE_LSECRXOCTV 0x08F48 /* InOctetsValidated */ +#define IXGBE_LSECRXBAD 0x08F4C /* InPktsBadTag */ +#define IXGBE_LSECRXNOSCI 0x08F50 /* InPktsNoSci */ +#define IXGBE_LSECRXUNSCI 0x08F54 /* InPktsUnknownSci */ +#define IXGBE_LSECRXUNCH 0x08F58 /* InPktsUnchecked */ +#define IXGBE_LSECRXDELAY 0x08F5C /* InPktsDelayed */ +#define IXGBE_LSECRXLATE 0x08F60 /* InPktsLate */ +#define IXGBE_LSECRXOK(_n) (0x08F64 + (0x04 * (_n))) /* InPktsOk */ +#define IXGBE_LSECRXINV(_n) (0x08F6C + (0x04 * (_n))) /* InPktsInvalid */ +#define IXGBE_LSECRXNV(_n) (0x08F74 + (0x04 * (_n))) /* InPktsNotValid */ +#define IXGBE_LSECRXUNSA 0x08F7C /* InPktsUnusedSa */ +#define IXGBE_LSECRXNUSA 0x08F80 /* InPktsNotUsingSa */ + +/* LinkSec (MacSec) Bit Fields and Masks */ +#define IXGBE_LSECTXCAP_SUM_MASK 0x00FF0000 +#define IXGBE_LSECTXCAP_SUM_SHIFT 16 +#define IXGBE_LSECRXCAP_SUM_MASK 0x00FF0000 +#define IXGBE_LSECRXCAP_SUM_SHIFT 16 + +#define IXGBE_LSECTXCTRL_EN_MASK 0x00000003 +#define IXGBE_LSECTXCTRL_DISABLE 0x0 +#define IXGBE_LSECTXCTRL_AUTH 0x1 +#define IXGBE_LSECTXCTRL_AUTH_ENCRYPT 0x2 +#define IXGBE_LSECTXCTRL_AISCI 0x00000020 +#define IXGBE_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00 +#define IXGBE_LSECTXCTRL_RSV_MASK 0x000000D8 + +#define IXGBE_LSECRXCTRL_EN_MASK 0x0000000C +#define IXGBE_LSECRXCTRL_EN_SHIFT 2 +#define IXGBE_LSECRXCTRL_DISABLE 0x0 +#define IXGBE_LSECRXCTRL_CHECK 0x1 +#define IXGBE_LSECRXCTRL_STRICT 0x2 +#define IXGBE_LSECRXCTRL_DROP 0x3 +#define IXGBE_LSECRXCTRL_PLSH 0x00000040 +#define IXGBE_LSECRXCTRL_RP 0x00000080 +#define IXGBE_LSECRXCTRL_RSV_MASK 0xFFFFFF33 + +/* IpSec Registers */ +#define IXGBE_IPSTXIDX 0x08900 +#define IXGBE_IPSTXSALT 0x08904 +#define IXGBE_IPSTXKEY(_i) (0x08908 + (4 * (_i))) /* 4 of these (0-3) */ +#define IXGBE_IPSRXIDX 0x08E00 +#define IXGBE_IPSRXIPADDR(_i) (0x08E04 + (4 * (_i))) /* 4 of these (0-3) */ +#define IXGBE_IPSRXSPI 0x08E14 +#define IXGBE_IPSRXIPIDX 0x08E18 +#define IXGBE_IPSRXKEY(_i) (0x08E1C + (4 * (_i))) /* 4 of these (0-3) */ +#define IXGBE_IPSRXSALT 0x08E2C +#define IXGBE_IPSRXMOD 0x08E30 + +#define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE 0x4 + +/* DCB registers */ +#define IXGBE_RTRPCS 0x02430 +#define IXGBE_RTTDCS 0x04900 +#define IXGBE_RTTDCS_ARBDIS 0x00000040 /* DCB arbiter disable */ +#define IXGBE_RTTPCS 0x0CD00 +#define IXGBE_RTRUP2TC 0x03020 +#define IXGBE_RTTUP2TC 0x0C800 +#define IXGBE_RTRPT4C(_i) (0x02140 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_TXLLQ(_i) (0x082E0 + ((_i) * 4)) /* 4 of these (0-3) */ +#define IXGBE_RTRPT4S(_i) (0x02160 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTDT2C(_i) (0x04910 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTDT2S(_i) (0x04930 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTPT2C(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTPT2S(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTDQSEL 0x04904 +#define IXGBE_RTTDT1C 0x04908 +#define IXGBE_RTTDT1S 0x0490C +#define IXGBE_RTTDTECC 0x04990 +#define IXGBE_RTTDTECC_NO_BCN 0x00000100 + +#define IXGBE_RTTBCNRC 0x04984 +#define IXGBE_RTTBCNRC_RS_ENA 0x80000000 +#define IXGBE_RTTBCNRC_RF_DEC_MASK 0x00003FFF +#define IXGBE_RTTBCNRC_RF_INT_SHIFT 14 +#define IXGBE_RTTBCNRC_RF_INT_MASK \ + (IXGBE_RTTBCNRC_RF_DEC_MASK << IXGBE_RTTBCNRC_RF_INT_SHIFT) +#define IXGBE_RTTBCNRM 0x04980 + +/* FCoE DMA Context Registers */ +#define IXGBE_FCPTRL 0x02410 /* FC User Desc. PTR Low */ +#define IXGBE_FCPTRH 0x02414 /* FC USer Desc. PTR High */ +#define IXGBE_FCBUFF 0x02418 /* FC Buffer Control */ +#define IXGBE_FCDMARW 0x02420 /* FC Receive DMA RW */ +#define IXGBE_FCINVST0 0x03FC0 /* FC Invalid DMA Context Status Reg 0*/ +#define IXGBE_FCINVST(_i) (IXGBE_FCINVST0 + ((_i) * 4)) +#define IXGBE_FCBUFF_VALID (1 << 0) /* DMA Context Valid */ +#define IXGBE_FCBUFF_BUFFSIZE (3 << 3) /* User Buffer Size */ +#define IXGBE_FCBUFF_WRCONTX (1 << 7) /* 0: Initiator, 1: Target */ +#define IXGBE_FCBUFF_BUFFCNT 0x0000ff00 /* Number of User Buffers */ +#define IXGBE_FCBUFF_OFFSET 0xffff0000 /* User Buffer Offset */ +#define IXGBE_FCBUFF_BUFFSIZE_SHIFT 3 +#define IXGBE_FCBUFF_BUFFCNT_SHIFT 8 +#define IXGBE_FCBUFF_OFFSET_SHIFT 16 +#define IXGBE_FCDMARW_WE (1 << 14) /* Write enable */ +#define IXGBE_FCDMARW_RE (1 << 15) /* Read enable */ +#define IXGBE_FCDMARW_FCOESEL 0x000001ff /* FC X_ID: 11 bits */ +#define IXGBE_FCDMARW_LASTSIZE 0xffff0000 /* Last User Buffer Size */ +#define IXGBE_FCDMARW_LASTSIZE_SHIFT 16 +/* FCoE SOF/EOF */ +#define IXGBE_TEOFF 0x04A94 /* Tx FC EOF */ +#define IXGBE_TSOFF 0x04A98 /* Tx FC SOF */ +#define IXGBE_REOFF 0x05158 /* Rx FC EOF */ +#define IXGBE_RSOFF 0x051F8 /* Rx FC SOF */ +/* FCoE Filter Context Registers */ +#define IXGBE_FCFLT 0x05108 /* FC FLT Context */ +#define IXGBE_FCFLTRW 0x05110 /* FC Filter RW Control */ +#define IXGBE_FCPARAM 0x051d8 /* FC Offset Parameter */ +#define IXGBE_FCFLT_VALID (1 << 0) /* Filter Context Valid */ +#define IXGBE_FCFLT_FIRST (1 << 1) /* Filter First */ +#define IXGBE_FCFLT_SEQID 0x00ff0000 /* Sequence ID */ +#define IXGBE_FCFLT_SEQCNT 0xff000000 /* Sequence Count */ +#define IXGBE_FCFLTRW_RVALDT (1 << 13) /* Fast Re-Validation */ +#define IXGBE_FCFLTRW_WE (1 << 14) /* Write Enable */ +#define IXGBE_FCFLTRW_RE (1 << 15) /* Read Enable */ +/* FCoE Receive Control */ +#define IXGBE_FCRXCTRL 0x05100 /* FC Receive Control */ +#define IXGBE_FCRXCTRL_FCOELLI (1 << 0) /* Low latency interrupt */ +#define IXGBE_FCRXCTRL_SAVBAD (1 << 1) /* Save Bad Frames */ +#define IXGBE_FCRXCTRL_FRSTRDH (1 << 2) /* EN 1st Read Header */ +#define IXGBE_FCRXCTRL_LASTSEQH (1 << 3) /* EN Last Header in Seq */ +#define IXGBE_FCRXCTRL_ALLH (1 << 4) /* EN All Headers */ +#define IXGBE_FCRXCTRL_FRSTSEQH (1 << 5) /* EN 1st Seq. Header */ +#define IXGBE_FCRXCTRL_ICRC (1 << 6) /* Ignore Bad FC CRC */ +#define IXGBE_FCRXCTRL_FCCRCBO (1 << 7) /* FC CRC Byte Ordering */ +#define IXGBE_FCRXCTRL_FCOEVER 0x00000f00 /* FCoE Version: 4 bits */ +#define IXGBE_FCRXCTRL_FCOEVER_SHIFT 8 +/* FCoE Redirection */ +#define IXGBE_FCRECTL 0x0ED00 /* FC Redirection Control */ +#define IXGBE_FCRETA0 0x0ED10 /* FC Redirection Table 0 */ +#define IXGBE_FCRETA(_i) (IXGBE_FCRETA0 + ((_i) * 4)) /* FCoE Redir */ +#define IXGBE_FCRECTL_ENA 0x1 /* FCoE Redir Table Enable */ +#define IXGBE_FCRETASEL_ENA 0x2 /* FCoE FCRETASEL bit */ +#define IXGBE_FCRETA_SIZE 8 /* Max entries in FCRETA */ +#define IXGBE_FCRETA_ENTRY_MASK 0x0000007f /* 7 bits for the queue index */ + +/* Stats registers */ +#define IXGBE_CRCERRS 0x04000 +#define IXGBE_ILLERRC 0x04004 +#define IXGBE_ERRBC 0x04008 +#define IXGBE_MSPDC 0x04010 +#define IXGBE_MPC(_i) (0x03FA0 + ((_i) * 4)) /* 8 of these 3FA0-3FBC*/ +#define IXGBE_MLFC 0x04034 +#define IXGBE_MRFC 0x04038 +#define IXGBE_RLEC 0x04040 +#define IXGBE_LXONTXC 0x03F60 +#define IXGBE_LXONRXC 0x0CF60 +#define IXGBE_LXOFFTXC 0x03F68 +#define IXGBE_LXOFFRXC 0x0CF68 +#define IXGBE_LXONRXCNT 0x041A4 +#define IXGBE_LXOFFRXCNT 0x041A8 +#define IXGBE_PXONRXCNT(_i) (0x04140 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_PXOFFRXCNT(_i) (0x04160 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_PXON2OFFCNT(_i) (0x03240 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_PXONTXC(_i) (0x03F00 + ((_i) * 4)) /* 8 of these 3F00-3F1C*/ +#define IXGBE_PXONRXC(_i) (0x0CF00 + ((_i) * 4)) /* 8 of these CF00-CF1C*/ +#define IXGBE_PXOFFTXC(_i) (0x03F20 + ((_i) * 4)) /* 8 of these 3F20-3F3C*/ +#define IXGBE_PXOFFRXC(_i) (0x0CF20 + ((_i) * 4)) /* 8 of these CF20-CF3C*/ +#define IXGBE_PRC64 0x0405C +#define IXGBE_PRC127 0x04060 +#define IXGBE_PRC255 0x04064 +#define IXGBE_PRC511 0x04068 +#define IXGBE_PRC1023 0x0406C +#define IXGBE_PRC1522 0x04070 +#define IXGBE_GPRC 0x04074 +#define IXGBE_BPRC 0x04078 +#define IXGBE_MPRC 0x0407C +#define IXGBE_GPTC 0x04080 +#define IXGBE_GORCL 0x04088 +#define IXGBE_GORCH 0x0408C +#define IXGBE_GOTCL 0x04090 +#define IXGBE_GOTCH 0x04094 +#define IXGBE_RNBC(_i) (0x03FC0 + ((_i) * 4)) /* 8 of these 3FC0-3FDC*/ +#define IXGBE_RUC 0x040A4 +#define IXGBE_RFC 0x040A8 +#define IXGBE_ROC 0x040AC +#define IXGBE_RJC 0x040B0 +#define IXGBE_MNGPRC 0x040B4 +#define IXGBE_MNGPDC 0x040B8 +#define IXGBE_MNGPTC 0x0CF90 +#define IXGBE_TORL 0x040C0 +#define IXGBE_TORH 0x040C4 +#define IXGBE_TPR 0x040D0 +#define IXGBE_TPT 0x040D4 +#define IXGBE_PTC64 0x040D8 +#define IXGBE_PTC127 0x040DC +#define IXGBE_PTC255 0x040E0 +#define IXGBE_PTC511 0x040E4 +#define IXGBE_PTC1023 0x040E8 +#define IXGBE_PTC1522 0x040EC +#define IXGBE_MPTC 0x040F0 +#define IXGBE_BPTC 0x040F4 +#define IXGBE_XEC 0x04120 +#define IXGBE_SSVPC 0x08780 + +#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4)) +#define IXGBE_TQSMR(_i) (((_i) <= 7) ? (0x07300 + ((_i) * 4)) : \ + (0x08600 + ((_i) * 4))) +#define IXGBE_TQSM(_i) (0x08600 + ((_i) * 4)) + +#define IXGBE_QPRC(_i) (0x01030 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QPTC(_i) (0x06030 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBRC(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBTC(_i) (0x06034 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBRC_L(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBRC_H(_i) (0x01038 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QPRDC(_i) (0x01430 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBTC_L(_i) (0x08700 + ((_i) * 0x8)) /* 16 of these */ +#define IXGBE_QBTC_H(_i) (0x08704 + ((_i) * 0x8)) /* 16 of these */ +#define IXGBE_FCCRC 0x05118 /* Num of Good Eth CRC w/ Bad FC CRC */ +#define IXGBE_FCOERPDC 0x0241C /* FCoE Rx Packets Dropped Count */ +#define IXGBE_FCLAST 0x02424 /* FCoE Last Error Count */ +#define IXGBE_FCOEPRC 0x02428 /* Number of FCoE Packets Received */ +#define IXGBE_FCOEDWRC 0x0242C /* Number of FCoE DWords Received */ +#define IXGBE_FCOEPTC 0x08784 /* Number of FCoE Packets Transmitted */ +#define IXGBE_FCOEDWTC 0x08788 /* Number of FCoE DWords Transmitted */ +#define IXGBE_FCCRC_CNT_MASK 0x0000FFFF /* CRC_CNT: bit 0 - 15 */ +#define IXGBE_FCLAST_CNT_MASK 0x0000FFFF /* Last_CNT: bit 0 - 15 */ +#define IXGBE_O2BGPTC 0x041C4 +#define IXGBE_O2BSPC 0x087B0 +#define IXGBE_B2OSPC 0x041C0 +#define IXGBE_B2OGPRC 0x02F90 +#define IXGBE_BUPRC 0x04180 +#define IXGBE_BMPRC 0x04184 +#define IXGBE_BBPRC 0x04188 +#define IXGBE_BUPTC 0x0418C +#define IXGBE_BMPTC 0x04190 +#define IXGBE_BBPTC 0x04194 +#define IXGBE_BCRCERRS 0x04198 +#define IXGBE_BXONRXC 0x0419C +#define IXGBE_BXOFFRXC 0x041E0 +#define IXGBE_BXONTXC 0x041E4 +#define IXGBE_BXOFFTXC 0x041E8 +#define IXGBE_PCRC8ECL 0x0E810 +#define IXGBE_PCRC8ECH 0x0E811 +#define IXGBE_PCRC8ECH_MASK 0x1F +#define IXGBE_LDPCECL 0x0E820 +#define IXGBE_LDPCECH 0x0E821 + +/* Management */ +#define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_MFUTP(_i) (0x05030 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_MANC 0x05820 +#define IXGBE_MFVAL 0x05824 +#define IXGBE_MANC2H 0x05860 +#define IXGBE_MDEF(_i) (0x05890 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_MIPAF 0x058B0 +#define IXGBE_MMAL(_i) (0x05910 + ((_i) * 8)) /* 4 of these (0-3) */ +#define IXGBE_MMAH(_i) (0x05914 + ((_i) * 8)) /* 4 of these (0-3) */ +#define IXGBE_FTFT 0x09400 /* 0x9400-0x97FC */ +#define IXGBE_METF(_i) (0x05190 + ((_i) * 4)) /* 4 of these (0-3) */ +#define IXGBE_MDEF_EXT(_i) (0x05160 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_LSWFW 0x15014 +#define IXGBE_BMCIP(_i) (0x05050 + ((_i) * 4)) /* 0x5050-0x505C */ +#define IXGBE_BMCIPVAL 0x05060 +#define IXGBE_BMCIP_IPADDR_TYPE 0x00000001 +#define IXGBE_BMCIP_IPADDR_VALID 0x00000002 + +/* Management Bit Fields and Masks */ +#define IXGBE_MANC_EN_BMC2OS 0x10000000 /* Ena BMC2OS and OS2BMC traffic */ +#define IXGBE_MANC_EN_BMC2OS_SHIFT 28 + +/* Firmware Semaphore Register */ +#define IXGBE_FWSM_MODE_MASK 0xE + +/* ARC Subsystem registers */ +#define IXGBE_HICR 0x15F00 +#define IXGBE_FWSTS 0x15F0C +#define IXGBE_HSMC0R 0x15F04 +#define IXGBE_HSMC1R 0x15F08 +#define IXGBE_SWSR 0x15F10 +#define IXGBE_HFDR 0x15FE8 +#define IXGBE_FLEX_MNG 0x15800 /* 0x15800 - 0x15EFC */ + +#define IXGBE_HICR_EN 0x01 /* Enable bit - RO */ +/* Driver sets this bit when done to put command in RAM */ +#define IXGBE_HICR_C 0x02 +#define IXGBE_HICR_SV 0x04 /* Status Validity */ +#define IXGBE_HICR_FW_RESET_ENABLE 0x40 +#define IXGBE_HICR_FW_RESET 0x80 + +/* PCI-E registers */ +#define IXGBE_GCR 0x11000 +#define IXGBE_GTV 0x11004 +#define IXGBE_FUNCTAG 0x11008 +#define IXGBE_GLT 0x1100C +#define IXGBE_PCIEPIPEADR 0x11004 +#define IXGBE_PCIEPIPEDAT 0x11008 +#define IXGBE_GSCL_1 0x11010 +#define IXGBE_GSCL_2 0x11014 +#define IXGBE_GSCL_3 0x11018 +#define IXGBE_GSCL_4 0x1101C +#define IXGBE_GSCN_0 0x11020 +#define IXGBE_GSCN_1 0x11024 +#define IXGBE_GSCN_2 0x11028 +#define IXGBE_GSCN_3 0x1102C +#define IXGBE_FACTPS 0x10150 +#define IXGBE_PCIEANACTL 0x11040 +#define IXGBE_SWSM 0x10140 +#define IXGBE_FWSM 0x10148 +#define IXGBE_GSSR 0x10160 +#define IXGBE_MREVID 0x11064 +#define IXGBE_DCA_ID 0x11070 +#define IXGBE_DCA_CTRL 0x11074 +#define IXGBE_SWFW_SYNC IXGBE_GSSR + +/* PCI-E registers 82599-Specific */ +#define IXGBE_GCR_EXT 0x11050 +#define IXGBE_GSCL_5_82599 0x11030 +#define IXGBE_GSCL_6_82599 0x11034 +#define IXGBE_GSCL_7_82599 0x11038 +#define IXGBE_GSCL_8_82599 0x1103C +#define IXGBE_PHYADR_82599 0x11040 +#define IXGBE_PHYDAT_82599 0x11044 +#define IXGBE_PHYCTL_82599 0x11048 +#define IXGBE_PBACLR_82599 0x11068 +#define IXGBE_CIAA_82599 0x11088 +#define IXGBE_CIAD_82599 0x1108C +#define IXGBE_PICAUSE 0x110B0 +#define IXGBE_PIENA 0x110B8 +#define IXGBE_CDQ_MBR_82599 0x110B4 +#define IXGBE_PCIESPARE 0x110BC +#define IXGBE_MISC_REG_82599 0x110F0 +#define IXGBE_ECC_CTRL_0_82599 0x11100 +#define IXGBE_ECC_CTRL_1_82599 0x11104 +#define IXGBE_ECC_STATUS_82599 0x110E0 +#define IXGBE_BAR_CTRL_82599 0x110F4 + +/* PCI Express Control */ +#define IXGBE_GCR_CMPL_TMOUT_MASK 0x0000F000 +#define IXGBE_GCR_CMPL_TMOUT_10ms 0x00001000 +#define IXGBE_GCR_CMPL_TMOUT_RESEND 0x00010000 +#define IXGBE_GCR_CAP_VER2 0x00040000 + +#define IXGBE_GCR_EXT_MSIX_EN 0x80000000 +#define IXGBE_GCR_EXT_BUFFERS_CLEAR 0x40000000 +#define IXGBE_GCR_EXT_VT_MODE_16 0x00000001 +#define IXGBE_GCR_EXT_VT_MODE_32 0x00000002 +#define IXGBE_GCR_EXT_VT_MODE_64 0x00000003 +#define IXGBE_GCR_EXT_SRIOV (IXGBE_GCR_EXT_MSIX_EN | \ + IXGBE_GCR_EXT_VT_MODE_64) +/* Time Sync Registers */ +#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */ +#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */ +#define IXGBE_RXSTMPL 0x051E8 /* Rx timestamp Low - RO */ +#define IXGBE_RXSTMPH 0x051A4 /* Rx timestamp High - RO */ +#define IXGBE_RXSATRL 0x051A0 /* Rx timestamp attribute low - RO */ +#define IXGBE_RXSATRH 0x051A8 /* Rx timestamp attribute high - RO */ +#define IXGBE_RXMTRL 0x05120 /* RX message type register low - RW */ +#define IXGBE_TXSTMPL 0x08C04 /* Tx timestamp value Low - RO */ +#define IXGBE_TXSTMPH 0x08C08 /* Tx timestamp value High - RO */ +#define IXGBE_SYSTIML 0x08C0C /* System time register Low - RO */ +#define IXGBE_SYSTIMH 0x08C10 /* System time register High - RO */ +#define IXGBE_TIMINCA 0x08C14 /* Increment attributes register - RW */ +#define IXGBE_TIMADJL 0x08C18 /* Time Adjustment Offset register Low - RW */ +#define IXGBE_TIMADJH 0x08C1C /* Time Adjustment Offset register High - RW */ +#define IXGBE_TSAUXC 0x08C20 /* TimeSync Auxiliary Control register - RW */ +#define IXGBE_TRGTTIML0 0x08C24 /* Target Time Register 0 Low - RW */ +#define IXGBE_TRGTTIMH0 0x08C28 /* Target Time Register 0 High - RW */ +#define IXGBE_TRGTTIML1 0x08C2C /* Target Time Register 1 Low - RW */ +#define IXGBE_TRGTTIMH1 0x08C30 /* Target Time Register 1 High - RW */ +#define IXGBE_FREQOUT0 0x08C34 /* Frequency Out 0 Control register - RW */ +#define IXGBE_FREQOUT1 0x08C38 /* Frequency Out 1 Control register - RW */ +#define IXGBE_AUXSTMPL0 0x08C3C /* Auxiliary Time Stamp 0 register Low - RO */ +#define IXGBE_AUXSTMPH0 0x08C40 /* Auxiliary Time Stamp 0 register High - RO */ +#define IXGBE_AUXSTMPL1 0x08C44 /* Auxiliary Time Stamp 1 register Low - RO */ +#define IXGBE_AUXSTMPH1 0x08C48 /* Auxiliary Time Stamp 1 register High - RO */ + +/* Diagnostic Registers */ +#define IXGBE_RDSTATCTL 0x02C20 +#define IXGBE_RDSTAT(_i) (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */ +#define IXGBE_RDHMPN 0x02F08 +#define IXGBE_RIC_DW(_i) (0x02F10 + ((_i) * 4)) +#define IXGBE_RDPROBE 0x02F20 +#define IXGBE_RDMAM 0x02F30 +#define IXGBE_RDMAD 0x02F34 +#define IXGBE_TDSTATCTL 0x07C20 +#define IXGBE_TDSTAT(_i) (0x07C00 + ((_i) * 4)) /* 0x07C00 - 0x07C1C */ +#define IXGBE_TDHMPN 0x07F08 +#define IXGBE_TDHMPN2 0x082FC +#define IXGBE_TXDESCIC 0x082CC +#define IXGBE_TIC_DW(_i) (0x07F10 + ((_i) * 4)) +#define IXGBE_TIC_DW2(_i) (0x082B0 + ((_i) * 4)) +#define IXGBE_TDPROBE 0x07F20 +#define IXGBE_TXBUFCTRL 0x0C600 +#define IXGBE_TXBUFDATA0 0x0C610 +#define IXGBE_TXBUFDATA1 0x0C614 +#define IXGBE_TXBUFDATA2 0x0C618 +#define IXGBE_TXBUFDATA3 0x0C61C +#define IXGBE_RXBUFCTRL 0x03600 +#define IXGBE_RXBUFDATA0 0x03610 +#define IXGBE_RXBUFDATA1 0x03614 +#define IXGBE_RXBUFDATA2 0x03618 +#define IXGBE_RXBUFDATA3 0x0361C +#define IXGBE_PCIE_DIAG(_i) (0x11090 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_RFVAL 0x050A4 +#define IXGBE_MDFTC1 0x042B8 +#define IXGBE_MDFTC2 0x042C0 +#define IXGBE_MDFTFIFO1 0x042C4 +#define IXGBE_MDFTFIFO2 0x042C8 +#define IXGBE_MDFTS 0x042CC +#define IXGBE_RXDATAWRPTR(_i) (0x03700 + ((_i) * 4)) /* 8 of these 3700-370C*/ +#define IXGBE_RXDESCWRPTR(_i) (0x03710 + ((_i) * 4)) /* 8 of these 3710-371C*/ +#define IXGBE_RXDATARDPTR(_i) (0x03720 + ((_i) * 4)) /* 8 of these 3720-372C*/ +#define IXGBE_RXDESCRDPTR(_i) (0x03730 + ((_i) * 4)) /* 8 of these 3730-373C*/ +#define IXGBE_TXDATAWRPTR(_i) (0x0C700 + ((_i) * 4)) /* 8 of these C700-C70C*/ +#define IXGBE_TXDESCWRPTR(_i) (0x0C710 + ((_i) * 4)) /* 8 of these C710-C71C*/ +#define IXGBE_TXDATARDPTR(_i) (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/ +#define IXGBE_TXDESCRDPTR(_i) (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/ +#define IXGBE_PCIEECCCTL 0x1106C +#define IXGBE_RXWRPTR(_i) (0x03100 + ((_i) * 4)) /* 8 of these 3100-310C*/ +#define IXGBE_RXUSED(_i) (0x03120 + ((_i) * 4)) /* 8 of these 3120-312C*/ +#define IXGBE_RXRDPTR(_i) (0x03140 + ((_i) * 4)) /* 8 of these 3140-314C*/ +#define IXGBE_RXRDWRPTR(_i) (0x03160 + ((_i) * 4)) /* 8 of these 3160-310C*/ +#define IXGBE_TXWRPTR(_i) (0x0C100 + ((_i) * 4)) /* 8 of these C100-C10C*/ +#define IXGBE_TXUSED(_i) (0x0C120 + ((_i) * 4)) /* 8 of these C120-C12C*/ +#define IXGBE_TXRDPTR(_i) (0x0C140 + ((_i) * 4)) /* 8 of these C140-C14C*/ +#define IXGBE_TXRDWRPTR(_i) (0x0C160 + ((_i) * 4)) /* 8 of these C160-C10C*/ +#define IXGBE_PCIEECCCTL0 0x11100 +#define IXGBE_PCIEECCCTL1 0x11104 +#define IXGBE_RXDBUECC 0x03F70 +#define IXGBE_TXDBUECC 0x0CF70 +#define IXGBE_RXDBUEST 0x03F74 +#define IXGBE_TXDBUEST 0x0CF74 +#define IXGBE_PBTXECC 0x0C300 +#define IXGBE_PBRXECC 0x03300 +#define IXGBE_GHECCR 0x110B0 + +/* MAC Registers */ +#define IXGBE_PCS1GCFIG 0x04200 +#define IXGBE_PCS1GLCTL 0x04208 +#define IXGBE_PCS1GLSTA 0x0420C +#define IXGBE_PCS1GDBG0 0x04210 +#define IXGBE_PCS1GDBG1 0x04214 +#define IXGBE_PCS1GANA 0x04218 +#define IXGBE_PCS1GANLP 0x0421C +#define IXGBE_PCS1GANNP 0x04220 +#define IXGBE_PCS1GANLPNP 0x04224 +#define IXGBE_HLREG0 0x04240 +#define IXGBE_HLREG1 0x04244 +#define IXGBE_PAP 0x04248 +#define IXGBE_MACA 0x0424C +#define IXGBE_APAE 0x04250 +#define IXGBE_ARD 0x04254 +#define IXGBE_AIS 0x04258 +#define IXGBE_MSCA 0x0425C +#define IXGBE_MSRWD 0x04260 +#define IXGBE_MLADD 0x04264 +#define IXGBE_MHADD 0x04268 +#define IXGBE_MAXFRS 0x04268 +#define IXGBE_TREG 0x0426C +#define IXGBE_PCSS1 0x04288 +#define IXGBE_PCSS2 0x0428C +#define IXGBE_XPCSS 0x04290 +#define IXGBE_MFLCN 0x04294 +#define IXGBE_SERDESC 0x04298 +#define IXGBE_MACS 0x0429C +#define IXGBE_AUTOC 0x042A0 +#define IXGBE_LINKS 0x042A4 +#define IXGBE_LINKS2 0x04324 +#define IXGBE_AUTOC2 0x042A8 +#define IXGBE_AUTOC3 0x042AC +#define IXGBE_ANLP1 0x042B0 +#define IXGBE_ANLP2 0x042B4 +#define IXGBE_MACC 0x04330 +#define IXGBE_ATLASCTL 0x04800 +#define IXGBE_MMNGC 0x042D0 +#define IXGBE_ANLPNP1 0x042D4 +#define IXGBE_ANLPNP2 0x042D8 +#define IXGBE_KRPCSFC 0x042E0 +#define IXGBE_KRPCSS 0x042E4 +#define IXGBE_FECS1 0x042E8 +#define IXGBE_FECS2 0x042EC +#define IXGBE_SMADARCTL 0x14F10 +#define IXGBE_MPVC 0x04318 +#define IXGBE_SGMIIC 0x04314 + +/* Statistics Registers */ +#define IXGBE_RXNFGPC 0x041B0 +#define IXGBE_RXNFGBCL 0x041B4 +#define IXGBE_RXNFGBCH 0x041B8 +#define IXGBE_RXDGPC 0x02F50 +#define IXGBE_RXDGBCL 0x02F54 +#define IXGBE_RXDGBCH 0x02F58 +#define IXGBE_RXDDGPC 0x02F5C +#define IXGBE_RXDDGBCL 0x02F60 +#define IXGBE_RXDDGBCH 0x02F64 +#define IXGBE_RXLPBKGPC 0x02F68 +#define IXGBE_RXLPBKGBCL 0x02F6C +#define IXGBE_RXLPBKGBCH 0x02F70 +#define IXGBE_RXDLPBKGPC 0x02F74 +#define IXGBE_RXDLPBKGBCL 0x02F78 +#define IXGBE_RXDLPBKGBCH 0x02F7C +#define IXGBE_TXDGPC 0x087A0 +#define IXGBE_TXDGBCL 0x087A4 +#define IXGBE_TXDGBCH 0x087A8 + +#define IXGBE_RXDSTATCTRL 0x02F40 + +/* Copper Pond 2 link timeout */ +#define IXGBE_VALIDATE_LINK_READY_TIMEOUT 50 + +/* Omer CORECTL */ +#define IXGBE_CORECTL 0x014F00 +/* BARCTRL */ +#define IXGBE_BARCTRL 0x110F4 +#define IXGBE_BARCTRL_FLSIZE 0x0700 +#define IXGBE_BARCTRL_FLSIZE_SHIFT 8 +#define IXGBE_BARCTRL_CSRSIZE 0x2000 + +/* RSCCTL Bit Masks */ +#define IXGBE_RSCCTL_RSCEN 0x01 +#define IXGBE_RSCCTL_MAXDESC_1 0x00 +#define IXGBE_RSCCTL_MAXDESC_4 0x04 +#define IXGBE_RSCCTL_MAXDESC_8 0x08 +#define IXGBE_RSCCTL_MAXDESC_16 0x0C + +/* RSCDBU Bit Masks */ +#define IXGBE_RSCDBU_RSCSMALDIS_MASK 0x0000007F +#define IXGBE_RSCDBU_RSCACKDIS 0x00000080 + +/* RDRXCTL Bit Masks */ +#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min THLD Size */ +#define IXGBE_RDRXCTL_CRCSTRIP 0x00000002 /* CRC Strip */ +#define IXGBE_RDRXCTL_MVMEN 0x00000020 +#define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */ +#define IXGBE_RDRXCTL_AGGDIS 0x00010000 /* Aggregation disable */ +#define IXGBE_RDRXCTL_RSCFRSTSIZE 0x003E0000 /* RSC First packet size */ +#define IXGBE_RDRXCTL_RSCLLIDIS 0x00800000 /* Disabl RSC compl on LLI */ +#define IXGBE_RDRXCTL_RSCACKC 0x02000000 /* must set 1 when RSC ena */ +#define IXGBE_RDRXCTL_FCOE_WRFIX 0x04000000 /* must set 1 when RSC ena */ + +/* RQTC Bit Masks and Shifts */ +#define IXGBE_RQTC_SHIFT_TC(_i) ((_i) * 4) +#define IXGBE_RQTC_TC0_MASK (0x7 << 0) +#define IXGBE_RQTC_TC1_MASK (0x7 << 4) +#define IXGBE_RQTC_TC2_MASK (0x7 << 8) +#define IXGBE_RQTC_TC3_MASK (0x7 << 12) +#define IXGBE_RQTC_TC4_MASK (0x7 << 16) +#define IXGBE_RQTC_TC5_MASK (0x7 << 20) +#define IXGBE_RQTC_TC6_MASK (0x7 << 24) +#define IXGBE_RQTC_TC7_MASK (0x7 << 28) + +/* PSRTYPE.RQPL Bit masks and shift */ +#define IXGBE_PSRTYPE_RQPL_MASK 0x7 +#define IXGBE_PSRTYPE_RQPL_SHIFT 29 + +/* CTRL Bit Masks */ +#define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */ +#define IXGBE_CTRL_LNK_RST 0x00000008 /* Link Reset. Resets everything. */ +#define IXGBE_CTRL_RST 0x04000000 /* Reset (SW) */ +#define IXGBE_CTRL_RST_MASK (IXGBE_CTRL_LNK_RST | IXGBE_CTRL_RST) + +/* FACTPS */ +#define IXGBE_FACTPS_LFS 0x40000000 /* LAN Function Select */ + +/* MHADD Bit Masks */ +#define IXGBE_MHADD_MFS_MASK 0xFFFF0000 +#define IXGBE_MHADD_MFS_SHIFT 16 + +/* Extended Device Control */ +#define IXGBE_CTRL_EXT_PFRSTD 0x00004000 /* Physical Function Reset Done */ +#define IXGBE_CTRL_EXT_NS_DIS 0x00010000 /* No Snoop disable */ +#define IXGBE_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ +#define IXGBE_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ + +/* Direct Cache Access (DCA) definitions */ +#define IXGBE_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */ +#define IXGBE_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */ + +#define IXGBE_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */ +#define IXGBE_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */ + +#define IXGBE_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */ +#define IXGBE_DCA_RXCTRL_CPUID_MASK_82599 0xFF000000 /* Rx CPUID Mask */ +#define IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599 24 /* Rx CPUID Shift */ +#define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* Rx Desc enable */ +#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* Rx Desc header ena */ +#define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* Rx Desc payload ena */ +#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* Rx rd Desc Relax Order */ +#define IXGBE_DCA_RXCTRL_DATA_WRO_EN (1 << 13) /* Rx wr data Relax Order */ +#define IXGBE_DCA_RXCTRL_HEAD_WRO_EN (1 << 15) /* Rx wr header RO */ + +#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ +#define IXGBE_DCA_TXCTRL_CPUID_MASK_82599 0xFF000000 /* Tx CPUID Mask */ +#define IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599 24 /* Tx CPUID Shift */ +#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ +#define IXGBE_DCA_TXCTRL_DESC_RRO_EN (1 << 9) /* Tx rd Desc Relax Order */ +#define IXGBE_DCA_TXCTRL_DESC_WRO_EN (1 << 11) /* Tx Desc writeback RO bit */ +#define IXGBE_DCA_TXCTRL_DATA_RRO_EN (1 << 13) /* Tx rd data Relax Order */ +#define IXGBE_DCA_MAX_QUEUES_82598 16 /* DCA regs only on 16 queues */ + +/* MSCA Bit Masks */ +#define IXGBE_MSCA_NP_ADDR_MASK 0x0000FFFF /* MDI Addr (new prot) */ +#define IXGBE_MSCA_NP_ADDR_SHIFT 0 +#define IXGBE_MSCA_DEV_TYPE_MASK 0x001F0000 /* Dev Type (new prot) */ +#define IXGBE_MSCA_DEV_TYPE_SHIFT 16 /* Register Address (old prot */ +#define IXGBE_MSCA_PHY_ADDR_MASK 0x03E00000 /* PHY Address mask */ +#define IXGBE_MSCA_PHY_ADDR_SHIFT 21 /* PHY Address shift*/ +#define IXGBE_MSCA_OP_CODE_MASK 0x0C000000 /* OP CODE mask */ +#define IXGBE_MSCA_OP_CODE_SHIFT 26 /* OP CODE shift */ +#define IXGBE_MSCA_ADDR_CYCLE 0x00000000 /* OP CODE 00 (addr cycle) */ +#define IXGBE_MSCA_WRITE 0x04000000 /* OP CODE 01 (wr) */ +#define IXGBE_MSCA_READ 0x0C000000 /* OP CODE 11 (rd) */ +#define IXGBE_MSCA_READ_AUTOINC 0x08000000 /* OP CODE 10 (rd auto inc)*/ +#define IXGBE_MSCA_ST_CODE_MASK 0x30000000 /* ST Code mask */ +#define IXGBE_MSCA_ST_CODE_SHIFT 28 /* ST Code shift */ +#define IXGBE_MSCA_NEW_PROTOCOL 0x00000000 /* ST CODE 00 (new prot) */ +#define IXGBE_MSCA_OLD_PROTOCOL 0x10000000 /* ST CODE 01 (old prot) */ +#define IXGBE_MSCA_MDI_COMMAND 0x40000000 /* Initiate MDI command */ +#define IXGBE_MSCA_MDI_IN_PROG_EN 0x80000000 /* MDI in progress ena */ + +/* MSRWD bit masks */ +#define IXGBE_MSRWD_WRITE_DATA_MASK 0x0000FFFF +#define IXGBE_MSRWD_WRITE_DATA_SHIFT 0 +#define IXGBE_MSRWD_READ_DATA_MASK 0xFFFF0000 +#define IXGBE_MSRWD_READ_DATA_SHIFT 16 + +/* Atlas registers */ +#define IXGBE_ATLAS_PDN_LPBK 0x24 +#define IXGBE_ATLAS_PDN_10G 0xB +#define IXGBE_ATLAS_PDN_1G 0xC +#define IXGBE_ATLAS_PDN_AN 0xD + +/* Atlas bit masks */ +#define IXGBE_ATLASCTL_WRITE_CMD 0x00010000 +#define IXGBE_ATLAS_PDN_TX_REG_EN 0x10 +#define IXGBE_ATLAS_PDN_TX_10G_QL_ALL 0xF0 +#define IXGBE_ATLAS_PDN_TX_1G_QL_ALL 0xF0 +#define IXGBE_ATLAS_PDN_TX_AN_QL_ALL 0xF0 + +/* Omer bit masks */ +#define IXGBE_CORECTL_WRITE_CMD 0x00010000 + +/* Device Type definitions for new protocol MDIO commands */ +#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1 +#define IXGBE_MDIO_PCS_DEV_TYPE 0x3 +#define IXGBE_MDIO_PHY_XS_DEV_TYPE 0x4 +#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7 +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */ +#define IXGBE_TWINAX_DEV 1 + +#define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */ + +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Ctrl Reg */ +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS 0x1 /* VS1 Status Reg */ +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS 0x0008 /* 1 = Link Up */ +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0-10G, 1-1G */ +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018 +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010 + +#define IXGBE_MDIO_AUTO_NEG_CONTROL 0x0 /* AUTO_NEG Control Reg */ +#define IXGBE_MDIO_AUTO_NEG_STATUS 0x1 /* AUTO_NEG Status Reg */ +#define IXGBE_MDIO_AUTO_NEG_ADVT 0x10 /* AUTO_NEG Advt Reg */ +#define IXGBE_MDIO_AUTO_NEG_LP 0x13 /* AUTO_NEG LP Status Reg */ +#define IXGBE_MDIO_PHY_XS_CONTROL 0x0 /* PHY_XS Control Reg */ +#define IXGBE_MDIO_PHY_XS_RESET 0x8000 /* PHY_XS Reset */ +#define IXGBE_MDIO_PHY_ID_HIGH 0x2 /* PHY ID High Reg*/ +#define IXGBE_MDIO_PHY_ID_LOW 0x3 /* PHY ID Low Reg*/ +#define IXGBE_MDIO_PHY_SPEED_ABILITY 0x4 /* Speed Ability Reg */ +#define IXGBE_MDIO_PHY_SPEED_10G 0x0001 /* 10G capable */ +#define IXGBE_MDIO_PHY_SPEED_1G 0x0010 /* 1G capable */ +#define IXGBE_MDIO_PHY_SPEED_100M 0x0020 /* 100M capable */ +#define IXGBE_MDIO_PHY_EXT_ABILITY 0xB /* Ext Ability Reg */ +#define IXGBE_MDIO_PHY_10GBASET_ABILITY 0x0004 /* 10GBaseT capable */ +#define IXGBE_MDIO_PHY_1000BASET_ABILITY 0x0020 /* 1000BaseT capable */ +#define IXGBE_MDIO_PHY_100BASETX_ABILITY 0x0080 /* 100BaseTX capable */ +#define IXGBE_MDIO_PHY_SET_LOW_POWER_MODE 0x0800 /* Set low power mode */ + +#define IXGBE_MDIO_PMA_PMD_CONTROL_ADDR 0x0000 /* PMA/PMD Control Reg */ +#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */ +#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */ +#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */ + +/* MII clause 22/28 definitions */ +#define IXGBE_MDIO_PHY_LOW_POWER_MODE 0x0800 + +#define IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG 0x20 /* 10G Control Reg */ +#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */ +#define IXGBE_MII_AUTONEG_XNP_TX_REG 0x17 /* 1G XNP Transmit */ +#define IXGBE_MII_AUTONEG_ADVERTISE_REG 0x10 /* 100M Advertisement */ +#define IXGBE_MII_10GBASE_T_ADVERTISE 0x1000 /* full duplex, bit:12*/ +#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX 0x4000 /* full duplex, bit:14*/ +#define IXGBE_MII_1GBASE_T_ADVERTISE 0x8000 /* full duplex, bit:15*/ +#define IXGBE_MII_100BASE_T_ADVERTISE 0x0100 /* full duplex, bit:8 */ +#define IXGBE_MII_100BASE_T_ADVERTISE_HALF 0x0080 /* half duplex, bit:7 */ +#define IXGBE_MII_RESTART 0x200 +#define IXGBE_MII_AUTONEG_COMPLETE 0x20 +#define IXGBE_MII_AUTONEG_LINK_UP 0x04 +#define IXGBE_MII_AUTONEG_REG 0x0 + +#define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0 +#define IXGBE_MAX_PHY_ADDR 32 + +/* PHY IDs*/ +#define TN1010_PHY_ID 0x00A19410 +#define TNX_FW_REV 0xB +#define X540_PHY_ID 0x01540200 +#define AQ_FW_REV 0x20 +#define QT2022_PHY_ID 0x0043A400 +#define ATH_PHY_ID 0x03429050 + +/* PHY Types */ +#define IXGBE_M88E1145_E_PHY_ID 0x01410CD0 + +/* Special PHY Init Routine */ +#define IXGBE_PHY_INIT_OFFSET_NL 0x002B +#define IXGBE_PHY_INIT_END_NL 0xFFFF +#define IXGBE_CONTROL_MASK_NL 0xF000 +#define IXGBE_DATA_MASK_NL 0x0FFF +#define IXGBE_CONTROL_SHIFT_NL 12 +#define IXGBE_DELAY_NL 0 +#define IXGBE_DATA_NL 1 +#define IXGBE_CONTROL_NL 0x000F +#define IXGBE_CONTROL_EOL_NL 0x0FFF +#define IXGBE_CONTROL_SOL_NL 0x0000 + +/* General purpose Interrupt Enable */ +#define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */ +#define IXGBE_SDP1_GPIEN 0x00000002 /* SDP1 */ +#define IXGBE_SDP2_GPIEN 0x00000004 /* SDP2 */ +#define IXGBE_GPIE_MSIX_MODE 0x00000010 /* MSI-X mode */ +#define IXGBE_GPIE_OCD 0x00000020 /* Other Clear Disable */ +#define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */ +#define IXGBE_GPIE_EIAME 0x40000000 +#define IXGBE_GPIE_PBA_SUPPORT 0x80000000 +#define IXGBE_GPIE_RSC_DELAY_SHIFT 11 +#define IXGBE_GPIE_VTMODE_MASK 0x0000C000 /* VT Mode Mask */ +#define IXGBE_GPIE_VTMODE_16 0x00004000 /* 16 VFs 8 queues per VF */ +#define IXGBE_GPIE_VTMODE_32 0x00008000 /* 32 VFs 4 queues per VF */ +#define IXGBE_GPIE_VTMODE_64 0x0000C000 /* 64 VFs 2 queues per VF */ + +/* Packet Buffer Initialization */ +#define IXGBE_MAX_PACKET_BUFFERS 8 + +#define IXGBE_TXPBSIZE_20KB 0x00005000 /* 20KB Packet Buffer */ +#define IXGBE_TXPBSIZE_40KB 0x0000A000 /* 40KB Packet Buffer */ +#define IXGBE_RXPBSIZE_48KB 0x0000C000 /* 48KB Packet Buffer */ +#define IXGBE_RXPBSIZE_64KB 0x00010000 /* 64KB Packet Buffer */ +#define IXGBE_RXPBSIZE_80KB 0x00014000 /* 80KB Packet Buffer */ +#define IXGBE_RXPBSIZE_128KB 0x00020000 /* 128KB Packet Buffer */ +#define IXGBE_RXPBSIZE_MAX 0x00080000 /* 512KB Packet Buffer */ +#define IXGBE_TXPBSIZE_MAX 0x00028000 /* 160KB Packet Buffer */ + +#define IXGBE_TXPKT_SIZE_MAX 0xA /* Max Tx Packet size */ +#define IXGBE_MAX_PB 8 + +/* Packet buffer allocation strategies */ +enum { + PBA_STRATEGY_EQUAL = 0, /* Distribute PB space equally */ +#define PBA_STRATEGY_EQUAL PBA_STRATEGY_EQUAL + PBA_STRATEGY_WEIGHTED = 1, /* Weight front half of TCs */ +#define PBA_STRATEGY_WEIGHTED PBA_STRATEGY_WEIGHTED +}; + +/* Transmit Flow Control status */ +#define IXGBE_TFCS_TXOFF 0x00000001 +#define IXGBE_TFCS_TXOFF0 0x00000100 +#define IXGBE_TFCS_TXOFF1 0x00000200 +#define IXGBE_TFCS_TXOFF2 0x00000400 +#define IXGBE_TFCS_TXOFF3 0x00000800 +#define IXGBE_TFCS_TXOFF4 0x00001000 +#define IXGBE_TFCS_TXOFF5 0x00002000 +#define IXGBE_TFCS_TXOFF6 0x00004000 +#define IXGBE_TFCS_TXOFF7 0x00008000 + +/* TCP Timer */ +#define IXGBE_TCPTIMER_KS 0x00000100 +#define IXGBE_TCPTIMER_COUNT_ENABLE 0x00000200 +#define IXGBE_TCPTIMER_COUNT_FINISH 0x00000400 +#define IXGBE_TCPTIMER_LOOP 0x00000800 +#define IXGBE_TCPTIMER_DURATION_MASK 0x000000FF + +/* HLREG0 Bit Masks */ +#define IXGBE_HLREG0_TXCRCEN 0x00000001 /* bit 0 */ +#define IXGBE_HLREG0_RXCRCSTRP 0x00000002 /* bit 1 */ +#define IXGBE_HLREG0_JUMBOEN 0x00000004 /* bit 2 */ +#define IXGBE_HLREG0_TXPADEN 0x00000400 /* bit 10 */ +#define IXGBE_HLREG0_TXPAUSEEN 0x00001000 /* bit 12 */ +#define IXGBE_HLREG0_RXPAUSEEN 0x00004000 /* bit 14 */ +#define IXGBE_HLREG0_LPBK 0x00008000 /* bit 15 */ +#define IXGBE_HLREG0_MDCSPD 0x00010000 /* bit 16 */ +#define IXGBE_HLREG0_CONTMDC 0x00020000 /* bit 17 */ +#define IXGBE_HLREG0_CTRLFLTR 0x00040000 /* bit 18 */ +#define IXGBE_HLREG0_PREPEND 0x00F00000 /* bits 20-23 */ +#define IXGBE_HLREG0_PRIPAUSEEN 0x01000000 /* bit 24 */ +#define IXGBE_HLREG0_RXPAUSERECDA 0x06000000 /* bits 25-26 */ +#define IXGBE_HLREG0_RXLNGTHERREN 0x08000000 /* bit 27 */ +#define IXGBE_HLREG0_RXPADSTRIPEN 0x10000000 /* bit 28 */ + +/* VMD_CTL bitmasks */ +#define IXGBE_VMD_CTL_VMDQ_EN 0x00000001 +#define IXGBE_VMD_CTL_VMDQ_FILTER 0x00000002 + +/* VT_CTL bitmasks */ +#define IXGBE_VT_CTL_DIS_DEFPL 0x20000000 /* disable default pool */ +#define IXGBE_VT_CTL_REPLEN 0x40000000 /* replication enabled */ +#define IXGBE_VT_CTL_VT_ENABLE 0x00000001 /* Enable VT Mode */ +#define IXGBE_VT_CTL_POOL_SHIFT 7 +#define IXGBE_VT_CTL_POOL_MASK (0x3F << IXGBE_VT_CTL_POOL_SHIFT) + +/* VMOLR bitmasks */ +#define IXGBE_VMOLR_AUPE 0x01000000 /* accept untagged packets */ +#define IXGBE_VMOLR_ROMPE 0x02000000 /* accept packets in MTA tbl */ +#define IXGBE_VMOLR_ROPE 0x04000000 /* accept packets in UC tbl */ +#define IXGBE_VMOLR_BAM 0x08000000 /* accept broadcast packets */ +#define IXGBE_VMOLR_MPE 0x10000000 /* multicast promiscuous */ + +/* VFRE bitmask */ +#define IXGBE_VFRE_ENABLE_ALL 0xFFFFFFFF + +#define IXGBE_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */ + +/* RDHMPN and TDHMPN bitmasks */ +#define IXGBE_RDHMPN_RDICADDR 0x007FF800 +#define IXGBE_RDHMPN_RDICRDREQ 0x00800000 +#define IXGBE_RDHMPN_RDICADDR_SHIFT 11 +#define IXGBE_TDHMPN_TDICADDR 0x003FF800 +#define IXGBE_TDHMPN_TDICRDREQ 0x00800000 +#define IXGBE_TDHMPN_TDICADDR_SHIFT 11 + +#define IXGBE_RDMAM_MEM_SEL_SHIFT 13 +#define IXGBE_RDMAM_DWORD_SHIFT 9 +#define IXGBE_RDMAM_DESC_COMP_FIFO 1 +#define IXGBE_RDMAM_DFC_CMD_FIFO 2 +#define IXGBE_RDMAM_RSC_HEADER_ADDR 3 +#define IXGBE_RDMAM_TCN_STATUS_RAM 4 +#define IXGBE_RDMAM_WB_COLL_FIFO 5 +#define IXGBE_RDMAM_QSC_CNT_RAM 6 +#define IXGBE_RDMAM_QSC_FCOE_RAM 7 +#define IXGBE_RDMAM_QSC_QUEUE_CNT 8 +#define IXGBE_RDMAM_QSC_QUEUE_RAM 0xA +#define IXGBE_RDMAM_QSC_RSC_RAM 0xB +#define IXGBE_RDMAM_DESC_COM_FIFO_RANGE 135 +#define IXGBE_RDMAM_DESC_COM_FIFO_COUNT 4 +#define IXGBE_RDMAM_DFC_CMD_FIFO_RANGE 48 +#define IXGBE_RDMAM_DFC_CMD_FIFO_COUNT 7 +#define IXGBE_RDMAM_RSC_HEADER_ADDR_RANGE 32 +#define IXGBE_RDMAM_RSC_HEADER_ADDR_COUNT 4 +#define IXGBE_RDMAM_TCN_STATUS_RAM_RANGE 256 +#define IXGBE_RDMAM_TCN_STATUS_RAM_COUNT 9 +#define IXGBE_RDMAM_WB_COLL_FIFO_RANGE 8 +#define IXGBE_RDMAM_WB_COLL_FIFO_COUNT 4 +#define IXGBE_RDMAM_QSC_CNT_RAM_RANGE 64 +#define IXGBE_RDMAM_QSC_CNT_RAM_COUNT 4 +#define IXGBE_RDMAM_QSC_FCOE_RAM_RANGE 512 +#define IXGBE_RDMAM_QSC_FCOE_RAM_COUNT 5 +#define IXGBE_RDMAM_QSC_QUEUE_CNT_RANGE 32 +#define IXGBE_RDMAM_QSC_QUEUE_CNT_COUNT 4 +#define IXGBE_RDMAM_QSC_QUEUE_RAM_RANGE 128 +#define IXGBE_RDMAM_QSC_QUEUE_RAM_COUNT 8 +#define IXGBE_RDMAM_QSC_RSC_RAM_RANGE 32 +#define IXGBE_RDMAM_QSC_RSC_RAM_COUNT 8 + +#define IXGBE_TXDESCIC_READY 0x80000000 + +/* Receive Checksum Control */ +#define IXGBE_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define IXGBE_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ + +/* FCRTL Bit Masks */ +#define IXGBE_FCRTL_XONE 0x80000000 /* XON enable */ +#define IXGBE_FCRTH_FCEN 0x80000000 /* Packet buffer fc enable */ + +/* PAP bit masks*/ +#define IXGBE_PAP_TXPAUSECNT_MASK 0x0000FFFF /* Pause counter mask */ + +/* RMCS Bit Masks */ +#define IXGBE_RMCS_RRM 0x00000002 /* Rx Recycle Mode enable */ +/* Receive Arbitration Control: 0 Round Robin, 1 DFP */ +#define IXGBE_RMCS_RAC 0x00000004 +/* Deficit Fixed Prio ena */ +#define IXGBE_RMCS_DFP IXGBE_RMCS_RAC +#define IXGBE_RMCS_TFCE_802_3X 0x00000008 /* Tx Priority FC ena */ +#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority FC ena */ +#define IXGBE_RMCS_ARBDIS 0x00000040 /* Arbitration disable bit */ + +/* FCCFG Bit Masks */ +#define IXGBE_FCCFG_TFCE_802_3X 0x00000008 /* Tx link FC enable */ +#define IXGBE_FCCFG_TFCE_PRIORITY 0x00000010 /* Tx priority FC enable */ + +/* Interrupt register bitmasks */ + +/* Extended Interrupt Cause Read */ +#define IXGBE_EICR_RTX_QUEUE 0x0000FFFF /* RTx Queue Interrupt */ +#define IXGBE_EICR_FLOW_DIR 0x00010000 /* FDir Exception */ +#define IXGBE_EICR_RX_MISS 0x00020000 /* Packet Buffer Overrun */ +#define IXGBE_EICR_PCI 0x00040000 /* PCI Exception */ +#define IXGBE_EICR_MAILBOX 0x00080000 /* VF to PF Mailbox Interrupt */ +#define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */ +#define IXGBE_EICR_LINKSEC 0x00200000 /* PN Threshold */ +#define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */ +#define IXGBE_EICR_TS 0x00800000 /* Thermal Sensor Event */ +#define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */ +#define IXGBE_EICR_GPI_SDP1 0x02000000 /* Gen Purpose Interrupt on SDP1 */ +#define IXGBE_EICR_GPI_SDP2 0x04000000 /* Gen Purpose Interrupt on SDP2 */ +#define IXGBE_EICR_ECC 0x10000000 /* ECC Error */ +#define IXGBE_EICR_PBUR 0x10000000 /* Packet Buffer Handler Error */ +#define IXGBE_EICR_DHER 0x20000000 /* Descriptor Handler Error */ +#define IXGBE_EICR_TCP_TIMER 0x40000000 /* TCP Timer */ +#define IXGBE_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ + +/* Extended Interrupt Cause Set */ +#define IXGBE_EICS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ +#define IXGBE_EICS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */ +#define IXGBE_EICS_RX_MISS IXGBE_EICR_RX_MISS /* Pkt Buffer Overrun */ +#define IXGBE_EICS_PCI IXGBE_EICR_PCI /* PCI Exception */ +#define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ +#define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */ +#define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ +#define IXGBE_EICS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ +#define IXGBE_EICS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ +#define IXGBE_EICS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ +#define IXGBE_EICS_ECC IXGBE_EICR_ECC /* ECC Error */ +#define IXGBE_EICS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ +#define IXGBE_EICS_DHER IXGBE_EICR_DHER /* Desc Handler Error */ +#define IXGBE_EICS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ +#define IXGBE_EICS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */ + +/* Extended Interrupt Mask Set */ +#define IXGBE_EIMS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ +#define IXGBE_EIMS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */ +#define IXGBE_EIMS_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */ +#define IXGBE_EIMS_PCI IXGBE_EICR_PCI /* PCI Exception */ +#define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ +#define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */ +#define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ +#define IXGBE_EIMS_TS IXGBE_EICR_TS /* Thermal Sensor Event */ +#define IXGBE_EIMS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ +#define IXGBE_EIMS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ +#define IXGBE_EIMS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ +#define IXGBE_EIMS_ECC IXGBE_EICR_ECC /* ECC Error */ +#define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ +#define IXGBE_EIMS_DHER IXGBE_EICR_DHER /* Descr Handler Error */ +#define IXGBE_EIMS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ +#define IXGBE_EIMS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */ + +/* Extended Interrupt Mask Clear */ +#define IXGBE_EIMC_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ +#define IXGBE_EIMC_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */ +#define IXGBE_EIMC_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */ +#define IXGBE_EIMC_PCI IXGBE_EICR_PCI /* PCI Exception */ +#define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ +#define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */ +#define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ +#define IXGBE_EIMC_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ +#define IXGBE_EIMC_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ +#define IXGBE_EIMC_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ +#define IXGBE_EIMC_ECC IXGBE_EICR_ECC /* ECC Error */ +#define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ +#define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Err */ +#define IXGBE_EIMC_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ +#define IXGBE_EIMC_OTHER IXGBE_EICR_OTHER /* INT Cause Active */ + +#define IXGBE_EIMS_ENABLE_MASK ( \ + IXGBE_EIMS_RTX_QUEUE | \ + IXGBE_EIMS_LSC | \ + IXGBE_EIMS_TCP_TIMER | \ + IXGBE_EIMS_OTHER) + +/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */ +#define IXGBE_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */ +#define IXGBE_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */ +#define IXGBE_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */ +#define IXGBE_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */ +#define IXGBE_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */ +#define IXGBE_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */ +#define IXGBE_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */ +#define IXGBE_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */ +#define IXGBE_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */ +#define IXGBE_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of control bits */ +#define IXGBE_IMIR_SIZE_BP_82599 0x00001000 /* Packet size bypass */ +#define IXGBE_IMIR_CTRL_URG_82599 0x00002000 /* Check URG bit in header */ +#define IXGBE_IMIR_CTRL_ACK_82599 0x00004000 /* Check ACK bit in header */ +#define IXGBE_IMIR_CTRL_PSH_82599 0x00008000 /* Check PSH bit in header */ +#define IXGBE_IMIR_CTRL_RST_82599 0x00010000 /* Check RST bit in header */ +#define IXGBE_IMIR_CTRL_SYN_82599 0x00020000 /* Check SYN bit in header */ +#define IXGBE_IMIR_CTRL_FIN_82599 0x00040000 /* Check FIN bit in header */ +#define IXGBE_IMIR_CTRL_BP_82599 0x00080000 /* Bypass chk of ctrl bits */ +#define IXGBE_IMIR_LLI_EN_82599 0x00100000 /* Enables low latency Int */ +#define IXGBE_IMIR_RX_QUEUE_MASK_82599 0x0000007F /* Rx Queue Mask */ +#define IXGBE_IMIR_RX_QUEUE_SHIFT_82599 21 /* Rx Queue Shift */ +#define IXGBE_IMIRVP_PRIORITY_MASK 0x00000007 /* VLAN priority mask */ +#define IXGBE_IMIRVP_PRIORITY_EN 0x00000008 /* VLAN priority enable */ + +#define IXGBE_MAX_FTQF_FILTERS 128 +#define IXGBE_FTQF_PROTOCOL_MASK 0x00000003 +#define IXGBE_FTQF_PROTOCOL_TCP 0x00000000 +#define IXGBE_FTQF_PROTOCOL_UDP 0x00000001 +#define IXGBE_FTQF_PROTOCOL_SCTP 2 +#define IXGBE_FTQF_PRIORITY_MASK 0x00000007 +#define IXGBE_FTQF_PRIORITY_SHIFT 2 +#define IXGBE_FTQF_POOL_MASK 0x0000003F +#define IXGBE_FTQF_POOL_SHIFT 8 +#define IXGBE_FTQF_5TUPLE_MASK_MASK 0x0000001F +#define IXGBE_FTQF_5TUPLE_MASK_SHIFT 25 +#define IXGBE_FTQF_SOURCE_ADDR_MASK 0x1E +#define IXGBE_FTQF_DEST_ADDR_MASK 0x1D +#define IXGBE_FTQF_SOURCE_PORT_MASK 0x1B +#define IXGBE_FTQF_DEST_PORT_MASK 0x17 +#define IXGBE_FTQF_PROTOCOL_COMP_MASK 0x0F +#define IXGBE_FTQF_POOL_MASK_EN 0x40000000 +#define IXGBE_FTQF_QUEUE_ENABLE 0x80000000 + +/* Interrupt clear mask */ +#define IXGBE_IRQ_CLEAR_MASK 0xFFFFFFFF + +/* Interrupt Vector Allocation Registers */ +#define IXGBE_IVAR_REG_NUM 25 +#define IXGBE_IVAR_REG_NUM_82599 64 +#define IXGBE_IVAR_TXRX_ENTRY 96 +#define IXGBE_IVAR_RX_ENTRY 64 +#define IXGBE_IVAR_RX_QUEUE(_i) (0 + (_i)) +#define IXGBE_IVAR_TX_QUEUE(_i) (64 + (_i)) +#define IXGBE_IVAR_TX_ENTRY 32 + +#define IXGBE_IVAR_TCP_TIMER_INDEX 96 /* 0 based index */ +#define IXGBE_IVAR_OTHER_CAUSES_INDEX 97 /* 0 based index */ + +#define IXGBE_MSIX_VECTOR(_i) (0 + (_i)) + +#define IXGBE_IVAR_ALLOC_VAL 0x80 /* Interrupt Allocation valid */ + +/* ETYPE Queue Filter/Select Bit Masks */ +#define IXGBE_MAX_ETQF_FILTERS 8 +#define IXGBE_ETQF_FCOE 0x08000000 /* bit 27 */ +#define IXGBE_ETQF_BCN 0x10000000 /* bit 28 */ +#define IXGBE_ETQF_1588 0x40000000 /* bit 30 */ +#define IXGBE_ETQF_FILTER_EN 0x80000000 /* bit 31 */ +#define IXGBE_ETQF_POOL_ENABLE (1 << 26) /* bit 26 */ + +#define IXGBE_ETQS_RX_QUEUE 0x007F0000 /* bits 22:16 */ +#define IXGBE_ETQS_RX_QUEUE_SHIFT 16 +#define IXGBE_ETQS_LLI 0x20000000 /* bit 29 */ +#define IXGBE_ETQS_QUEUE_EN 0x80000000 /* bit 31 */ + +/* + * ETQF filter list: one static filter per filter consumer. This is + * to avoid filter collisions later. Add new filters + * here!! + * + * Current filters: + * EAPOL 802.1x (0x888e): Filter 0 + * FCoE (0x8906): Filter 2 + * 1588 (0x88f7): Filter 3 + * FIP (0x8914): Filter 4 + */ +#define IXGBE_ETQF_FILTER_EAPOL 0 +#define IXGBE_ETQF_FILTER_FCOE 2 +#define IXGBE_ETQF_FILTER_1588 3 +#define IXGBE_ETQF_FILTER_FIP 4 +/* VLAN Control Bit Masks */ +#define IXGBE_VLNCTRL_VET 0x0000FFFF /* bits 0-15 */ +#define IXGBE_VLNCTRL_CFI 0x10000000 /* bit 28 */ +#define IXGBE_VLNCTRL_CFIEN 0x20000000 /* bit 29 */ +#define IXGBE_VLNCTRL_VFE 0x40000000 /* bit 30 */ +#define IXGBE_VLNCTRL_VME 0x80000000 /* bit 31 */ + +/* VLAN pool filtering masks */ +#define IXGBE_VLVF_VIEN 0x80000000 /* filter is valid */ +#define IXGBE_VLVF_ENTRIES 64 +#define IXGBE_VLVF_VLANID_MASK 0x00000FFF +/* Per VF Port VLAN insertion rules */ +#define IXGBE_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */ +#define IXGBE_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */ + +#define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.1q protocol */ + +/* STATUS Bit Masks */ +#define IXGBE_STATUS_LAN_ID 0x0000000C /* LAN ID */ +#define IXGBE_STATUS_LAN_ID_SHIFT 2 /* LAN ID Shift*/ +#define IXGBE_STATUS_GIO 0x00080000 /* GIO Master Ena Status */ + +#define IXGBE_STATUS_LAN_ID_0 0x00000000 /* LAN ID 0 */ +#define IXGBE_STATUS_LAN_ID_1 0x00000004 /* LAN ID 1 */ + +/* ESDP Bit Masks */ +#define IXGBE_ESDP_SDP0 0x00000001 /* SDP0 Data Value */ +#define IXGBE_ESDP_SDP1 0x00000002 /* SDP1 Data Value */ +#define IXGBE_ESDP_SDP2 0x00000004 /* SDP2 Data Value */ +#define IXGBE_ESDP_SDP3 0x00000008 /* SDP3 Data Value */ +#define IXGBE_ESDP_SDP4 0x00000010 /* SDP4 Data Value */ +#define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */ +#define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */ +#define IXGBE_ESDP_SDP0_DIR 0x00000100 /* SDP0 IO direction */ +#define IXGBE_ESDP_SDP1_DIR 0x00000200 /* SDP1 IO direction */ +#define IXGBE_ESDP_SDP4_DIR 0x00001000 /* SDP4 IO direction */ +#define IXGBE_ESDP_SDP5_DIR 0x00002000 /* SDP5 IO direction */ +#define IXGBE_ESDP_SDP0_NATIVE 0x00010000 /* SDP0 IO mode */ +#define IXGBE_ESDP_SDP1_NATIVE 0x00020000 /* SDP1 IO mode */ + + +/* LEDCTL Bit Masks */ +#define IXGBE_LED_IVRT_BASE 0x00000040 +#define IXGBE_LED_BLINK_BASE 0x00000080 +#define IXGBE_LED_MODE_MASK_BASE 0x0000000F +#define IXGBE_LED_OFFSET(_base, _i) (_base << (8 * (_i))) +#define IXGBE_LED_MODE_SHIFT(_i) (8*(_i)) +#define IXGBE_LED_IVRT(_i) IXGBE_LED_OFFSET(IXGBE_LED_IVRT_BASE, _i) +#define IXGBE_LED_BLINK(_i) IXGBE_LED_OFFSET(IXGBE_LED_BLINK_BASE, _i) +#define IXGBE_LED_MODE_MASK(_i) IXGBE_LED_OFFSET(IXGBE_LED_MODE_MASK_BASE, _i) + +/* LED modes */ +#define IXGBE_LED_LINK_UP 0x0 +#define IXGBE_LED_LINK_10G 0x1 +#define IXGBE_LED_MAC 0x2 +#define IXGBE_LED_FILTER 0x3 +#define IXGBE_LED_LINK_ACTIVE 0x4 +#define IXGBE_LED_LINK_1G 0x5 +#define IXGBE_LED_ON 0xE +#define IXGBE_LED_OFF 0xF + +/* AUTOC Bit Masks */ +#define IXGBE_AUTOC_KX4_KX_SUPP_MASK 0xC0000000 +#define IXGBE_AUTOC_KX4_SUPP 0x80000000 +#define IXGBE_AUTOC_KX_SUPP 0x40000000 +#define IXGBE_AUTOC_PAUSE 0x30000000 +#define IXGBE_AUTOC_ASM_PAUSE 0x20000000 +#define IXGBE_AUTOC_SYM_PAUSE 0x10000000 +#define IXGBE_AUTOC_RF 0x08000000 +#define IXGBE_AUTOC_PD_TMR 0x06000000 +#define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000 +#define IXGBE_AUTOC_AN_RX_DRIFT 0x00800000 +#define IXGBE_AUTOC_AN_RX_ALIGN 0x007C0000 +#define IXGBE_AUTOC_FECA 0x00040000 +#define IXGBE_AUTOC_FECR 0x00020000 +#define IXGBE_AUTOC_KR_SUPP 0x00010000 +#define IXGBE_AUTOC_AN_RESTART 0x00001000 +#define IXGBE_AUTOC_FLU 0x00000001 +#define IXGBE_AUTOC_LMS_SHIFT 13 +#define IXGBE_AUTOC_LMS_10G_SERIAL (0x3 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_KX_KR (0x4 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_SGMII_1G_100M (0x5 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII (0x7 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_MASK (0x7 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN (0x0 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN (0x1 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_1G_AN (0x2 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_AN (0x4 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_ATTACH_TYPE (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) + +#define IXGBE_AUTOC_1G_PMA_PMD_MASK 0x00000200 +#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9 +#define IXGBE_AUTOC_10G_PMA_PMD_MASK 0x00000180 +#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7 +#define IXGBE_AUTOC_10G_XAUI (0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_10G_KX4 (0x1 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_10G_CX4 (0x2 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_1G_BX (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_1G_KX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_1G_SFI (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_1G_KX_BX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) + +#define IXGBE_AUTOC2_UPPER_MASK 0xFFFF0000 +#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK 0x00030000 +#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT 16 +#define IXGBE_AUTOC2_10G_KR (0x0 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT) +#define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT) +#define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT) + +#define IXGBE_MACC_FLU 0x00000001 +#define IXGBE_MACC_FSV_10G 0x00030000 +#define IXGBE_MACC_FS 0x00040000 +#define IXGBE_MAC_RX2TX_LPBK 0x00000002 + +/* LINKS Bit Masks */ +#define IXGBE_LINKS_KX_AN_COMP 0x80000000 +#define IXGBE_LINKS_UP 0x40000000 +#define IXGBE_LINKS_SPEED 0x20000000 +#define IXGBE_LINKS_MODE 0x18000000 +#define IXGBE_LINKS_RX_MODE 0x06000000 +#define IXGBE_LINKS_TX_MODE 0x01800000 +#define IXGBE_LINKS_XGXS_EN 0x00400000 +#define IXGBE_LINKS_SGMII_EN 0x02000000 +#define IXGBE_LINKS_PCS_1G_EN 0x00200000 +#define IXGBE_LINKS_1G_AN_EN 0x00100000 +#define IXGBE_LINKS_KX_AN_IDLE 0x00080000 +#define IXGBE_LINKS_1G_SYNC 0x00040000 +#define IXGBE_LINKS_10G_ALIGN 0x00020000 +#define IXGBE_LINKS_10G_LANE_SYNC 0x00017000 +#define IXGBE_LINKS_TL_FAULT 0x00001000 +#define IXGBE_LINKS_SIGNAL 0x00000F00 + +#define IXGBE_LINKS_SPEED_82599 0x30000000 +#define IXGBE_LINKS_SPEED_10G_82599 0x30000000 +#define IXGBE_LINKS_SPEED_1G_82599 0x20000000 +#define IXGBE_LINKS_SPEED_100_82599 0x10000000 +#define IXGBE_LINK_UP_TIME 90 /* 9.0 Seconds */ +#define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */ + +#define IXGBE_LINKS2_AN_SUPPORTED 0x00000040 + +/* PCS1GLSTA Bit Masks */ +#define IXGBE_PCS1GLSTA_LINK_OK 1 +#define IXGBE_PCS1GLSTA_SYNK_OK 0x10 +#define IXGBE_PCS1GLSTA_AN_COMPLETE 0x10000 +#define IXGBE_PCS1GLSTA_AN_PAGE_RX 0x20000 +#define IXGBE_PCS1GLSTA_AN_TIMED_OUT 0x40000 +#define IXGBE_PCS1GLSTA_AN_REMOTE_FAULT 0x80000 +#define IXGBE_PCS1GLSTA_AN_ERROR_RWS 0x100000 + +#define IXGBE_PCS1GANA_SYM_PAUSE 0x80 +#define IXGBE_PCS1GANA_ASM_PAUSE 0x100 + +/* PCS1GLCTL Bit Masks */ +#define IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN 0x00040000 /* PCS 1G autoneg to en */ +#define IXGBE_PCS1GLCTL_FLV_LINK_UP 1 +#define IXGBE_PCS1GLCTL_FORCE_LINK 0x20 +#define IXGBE_PCS1GLCTL_LOW_LINK_LATCH 0x40 +#define IXGBE_PCS1GLCTL_AN_ENABLE 0x10000 +#define IXGBE_PCS1GLCTL_AN_RESTART 0x20000 + +/* ANLP1 Bit Masks */ +#define IXGBE_ANLP1_PAUSE 0x0C00 +#define IXGBE_ANLP1_SYM_PAUSE 0x0400 +#define IXGBE_ANLP1_ASM_PAUSE 0x0800 +#define IXGBE_ANLP1_AN_STATE_MASK 0x000f0000 + +/* SW Semaphore Register bitmasks */ +#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +#define IXGBE_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ +#define IXGBE_SWFW_REGSMP 0x80000000 /* Register Semaphore bit 31 */ + +/* SW_FW_SYNC/GSSR definitions */ +#define IXGBE_GSSR_EEP_SM 0x0001 +#define IXGBE_GSSR_PHY0_SM 0x0002 +#define IXGBE_GSSR_PHY1_SM 0x0004 +#define IXGBE_GSSR_MAC_CSR_SM 0x0008 +#define IXGBE_GSSR_FLASH_SM 0x0010 +#define IXGBE_GSSR_SW_MNG_SM 0x0400 + +/* FW Status register bitmask */ +#define IXGBE_FWSTS_FWRI 0x00000200 /* Firmware Reset Indication */ + +/* EEC Register */ +#define IXGBE_EEC_SK 0x00000001 /* EEPROM Clock */ +#define IXGBE_EEC_CS 0x00000002 /* EEPROM Chip Select */ +#define IXGBE_EEC_DI 0x00000004 /* EEPROM Data In */ +#define IXGBE_EEC_DO 0x00000008 /* EEPROM Data Out */ +#define IXGBE_EEC_FWE_MASK 0x00000030 /* FLASH Write Enable */ +#define IXGBE_EEC_FWE_DIS 0x00000010 /* Disable FLASH writes */ +#define IXGBE_EEC_FWE_EN 0x00000020 /* Enable FLASH writes */ +#define IXGBE_EEC_FWE_SHIFT 4 +#define IXGBE_EEC_REQ 0x00000040 /* EEPROM Access Request */ +#define IXGBE_EEC_GNT 0x00000080 /* EEPROM Access Grant */ +#define IXGBE_EEC_PRES 0x00000100 /* EEPROM Present */ +#define IXGBE_EEC_ARD 0x00000200 /* EEPROM Auto Read Done */ +#define IXGBE_EEC_FLUP 0x00800000 /* Flash update command */ +#define IXGBE_EEC_SEC1VAL 0x02000000 /* Sector 1 Valid */ +#define IXGBE_EEC_FLUDONE 0x04000000 /* Flash update done */ +/* EEPROM Addressing bits based on type (0-small, 1-large) */ +#define IXGBE_EEC_ADDR_SIZE 0x00000400 +#define IXGBE_EEC_SIZE 0x00007800 /* EEPROM Size */ +#define IXGBE_EERD_MAX_ADDR 0x00003FFF /* EERD alows 14 bits for addr. */ + +#define IXGBE_EEC_SIZE_SHIFT 11 +#define IXGBE_EEPROM_WORD_SIZE_SHIFT 6 +#define IXGBE_EEPROM_OPCODE_BITS 8 + +/* Part Number String Length */ +#define IXGBE_PBANUM_LENGTH 11 + +/* Checksum and EEPROM pointers */ +#define IXGBE_PBANUM_PTR_GUARD 0xFAFA +#define IXGBE_EEPROM_CHECKSUM 0x3F +#define IXGBE_EEPROM_SUM 0xBABA +#define IXGBE_PCIE_ANALOG_PTR 0x03 +#define IXGBE_ATLAS0_CONFIG_PTR 0x04 +#define IXGBE_PHY_PTR 0x04 +#define IXGBE_ATLAS1_CONFIG_PTR 0x05 +#define IXGBE_OPTION_ROM_PTR 0x05 +#define IXGBE_PCIE_GENERAL_PTR 0x06 +#define IXGBE_PCIE_CONFIG0_PTR 0x07 +#define IXGBE_PCIE_CONFIG1_PTR 0x08 +#define IXGBE_CORE0_PTR 0x09 +#define IXGBE_CORE1_PTR 0x0A +#define IXGBE_MAC0_PTR 0x0B +#define IXGBE_MAC1_PTR 0x0C +#define IXGBE_CSR0_CONFIG_PTR 0x0D +#define IXGBE_CSR1_CONFIG_PTR 0x0E +#define IXGBE_FW_PTR 0x0F +#define IXGBE_PBANUM0_PTR 0x15 +#define IXGBE_PBANUM1_PTR 0x16 +#define IXGBE_ALT_MAC_ADDR_PTR 0x37 +#define IXGBE_FREE_SPACE_PTR 0X3E + +/* External Thermal Sensor Config */ +#define IXGBE_ETS_CFG 0x26 +#define IXGBE_ETS_LTHRES_DELTA_MASK 0x07C0 +#define IXGBE_ETS_LTHRES_DELTA_SHIFT 6 +#define IXGBE_ETS_TYPE_MASK 0x0038 +#define IXGBE_ETS_TYPE_SHIFT 3 +#define IXGBE_ETS_TYPE_EMC 0x000 +#define IXGBE_ETS_NUM_SENSORS_MASK 0x0007 +#define IXGBE_ETS_DATA_LOC_MASK 0x3C00 +#define IXGBE_ETS_DATA_LOC_SHIFT 10 +#define IXGBE_ETS_DATA_INDEX_MASK 0x0300 +#define IXGBE_ETS_DATA_INDEX_SHIFT 8 +#define IXGBE_ETS_DATA_HTHRESH_MASK 0x00FF + +#define IXGBE_SAN_MAC_ADDR_PTR 0x28 +#define IXGBE_DEVICE_CAPS 0x2C +#define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11 +#define IXGBE_PCIE_MSIX_82599_CAPS 0x72 +#define IXGBE_MAX_MSIX_VECTORS_82599 0x40 +#define IXGBE_PCIE_MSIX_82598_CAPS 0x62 +#define IXGBE_MAX_MSIX_VECTORS_82598 0x13 + +/* MSI-X capability fields masks */ +#define IXGBE_PCIE_MSIX_TBL_SZ_MASK 0x7FF + +/* Legacy EEPROM word offsets */ +#define IXGBE_ISCSI_BOOT_CAPS 0x0033 +#define IXGBE_ISCSI_SETUP_PORT_0 0x0030 +#define IXGBE_ISCSI_SETUP_PORT_1 0x0034 + +/* EEPROM Commands - SPI */ +#define IXGBE_EEPROM_MAX_RETRY_SPI 5000 /* Max wait 5ms for RDY signal */ +#define IXGBE_EEPROM_STATUS_RDY_SPI 0x01 +#define IXGBE_EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ +#define IXGBE_EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ +#define IXGBE_EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = addr bit-8 */ +#define IXGBE_EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Ena latch */ +/* EEPROM reset Write Enable latch */ +#define IXGBE_EEPROM_WRDI_OPCODE_SPI 0x04 +#define IXGBE_EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status reg */ +#define IXGBE_EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status reg */ +#define IXGBE_EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */ +#define IXGBE_EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */ +#define IXGBE_EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ + +/* EEPROM Read Register */ +#define IXGBE_EEPROM_RW_REG_DATA 16 /* data offset in EEPROM read reg */ +#define IXGBE_EEPROM_RW_REG_DONE 2 /* Offset to READ done bit */ +#define IXGBE_EEPROM_RW_REG_START 1 /* First bit to start operation */ +#define IXGBE_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define IXGBE_NVM_POLL_WRITE 1 /* Flag for polling for wr complete */ +#define IXGBE_NVM_POLL_READ 0 /* Flag for polling for rd complete */ + +#define IXGBE_ETH_LENGTH_OF_ADDRESS 6 + +#define IXGBE_EEPROM_PAGE_SIZE_MAX 128 +#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* words rd in burst */ +#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* words wr in burst */ + +#ifndef IXGBE_EEPROM_GRANT_ATTEMPTS +#define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM attempts to gain grant */ +#endif + +#ifndef IXGBE_EERD_EEWR_ATTEMPTS +/* Number of 5 microseconds we wait for EERD read and + * EERW write to complete */ +#define IXGBE_EERD_EEWR_ATTEMPTS 100000 +#endif + +#ifndef IXGBE_FLUDONE_ATTEMPTS +/* # attempts we wait for flush update to complete */ +#define IXGBE_FLUDONE_ATTEMPTS 20000 +#endif + +#define IXGBE_PCIE_CTRL2 0x5 /* PCIe Control 2 Offset */ +#define IXGBE_PCIE_CTRL2_DUMMY_ENABLE 0x8 /* Dummy Function Enable */ +#define IXGBE_PCIE_CTRL2_LAN_DISABLE 0x2 /* LAN PCI Disable */ +#define IXGBE_PCIE_CTRL2_DISABLE_SELECT 0x1 /* LAN Disable Select */ + +#define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET 0x0 +#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET 0x3 +#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP 0x1 +#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS 0x2 +#define IXGBE_FW_LESM_PARAMETERS_PTR 0x2 +#define IXGBE_FW_LESM_STATE_1 0x1 +#define IXGBE_FW_LESM_STATE_ENABLED 0x8000 /* LESM Enable bit */ +#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR 0x4 +#define IXGBE_FW_PATCH_VERSION_4 0x7 +#define IXGBE_FCOE_IBA_CAPS_BLK_PTR 0x33 /* iSCSI/FCOE block */ +#define IXGBE_FCOE_IBA_CAPS_FCOE 0x20 /* FCOE flags */ +#define IXGBE_ISCSI_FCOE_BLK_PTR 0x17 /* iSCSI/FCOE block */ +#define IXGBE_ISCSI_FCOE_FLAGS_OFFSET 0x0 /* FCOE flags */ +#define IXGBE_ISCSI_FCOE_FLAGS_ENABLE 0x1 /* FCOE flags enable bit */ +#define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR 0x27 /* Alt. SAN MAC block */ +#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET 0x0 /* Alt SAN MAC capability */ +#define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET 0x1 /* Alt SAN MAC 0 offset */ +#define IXGBE_ALT_SAN_MAC_ADDR_PORT1_OFFSET 0x4 /* Alt SAN MAC 1 offset */ +#define IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET 0x7 /* Alt WWNN prefix offset */ +#define IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET 0x8 /* Alt WWPN prefix offset */ +#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_SANMAC 0x0 /* Alt SAN MAC exists */ +#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN 0x1 /* Alt WWN base exists */ + +#define IXGBE_DEVICE_CAPS_WOL_PORT0_1 0x4 /* WoL supported on ports 0 & 1 */ +#define IXGBE_DEVICE_CAPS_WOL_PORT0 0x8 /* WoL supported on port 0 */ +#define IXGBE_DEVICE_CAPS_WOL_MASK 0xC /* Mask for WoL capabilities */ + +/* PCI Bus Info */ +#define IXGBE_PCI_DEVICE_STATUS 0xAA +#define IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING 0x0020 +#define IXGBE_PCI_LINK_STATUS 0xB2 +#define IXGBE_PCI_DEVICE_CONTROL2 0xC8 +#define IXGBE_PCI_LINK_WIDTH 0x3F0 +#define IXGBE_PCI_LINK_WIDTH_1 0x10 +#define IXGBE_PCI_LINK_WIDTH_2 0x20 +#define IXGBE_PCI_LINK_WIDTH_4 0x40 +#define IXGBE_PCI_LINK_WIDTH_8 0x80 +#define IXGBE_PCI_LINK_SPEED 0xF +#define IXGBE_PCI_LINK_SPEED_2500 0x1 +#define IXGBE_PCI_LINK_SPEED_5000 0x2 +#define IXGBE_PCI_LINK_SPEED_8000 0x3 +#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E +#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80 +#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005 + +/* Number of 100 microseconds we wait for PCI Express master disable */ +#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800 + +/* Check whether address is multicast. This is little-endian specific check.*/ +#define IXGBE_IS_MULTICAST(Address) \ + (bool)(((u8 *)(Address))[0] & ((u8)0x01)) + +/* Check whether an address is broadcast. */ +#define IXGBE_IS_BROADCAST(Address) \ + ((((u8 *)(Address))[0] == ((u8)0xff)) && \ + (((u8 *)(Address))[1] == ((u8)0xff))) + +/* RAH */ +#define IXGBE_RAH_VIND_MASK 0x003C0000 +#define IXGBE_RAH_VIND_SHIFT 18 +#define IXGBE_RAH_AV 0x80000000 +#define IXGBE_CLEAR_VMDQ_ALL 0xFFFFFFFF + +/* Header split receive */ +#define IXGBE_RFCTL_ISCSI_DIS 0x00000001 +#define IXGBE_RFCTL_ISCSI_DWC_MASK 0x0000003E +#define IXGBE_RFCTL_ISCSI_DWC_SHIFT 1 +#define IXGBE_RFCTL_RSC_DIS 0x00000010 +#define IXGBE_RFCTL_NFSW_DIS 0x00000040 +#define IXGBE_RFCTL_NFSR_DIS 0x00000080 +#define IXGBE_RFCTL_NFS_VER_MASK 0x00000300 +#define IXGBE_RFCTL_NFS_VER_SHIFT 8 +#define IXGBE_RFCTL_NFS_VER_2 0 +#define IXGBE_RFCTL_NFS_VER_3 1 +#define IXGBE_RFCTL_NFS_VER_4 2 +#define IXGBE_RFCTL_IPV6_DIS 0x00000400 +#define IXGBE_RFCTL_IPV6_XSUM_DIS 0x00000800 +#define IXGBE_RFCTL_IPFRSP_DIS 0x00004000 +#define IXGBE_RFCTL_IPV6_EX_DIS 0x00010000 +#define IXGBE_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 + +/* Transmit Config masks */ +#define IXGBE_TXDCTL_ENABLE 0x02000000 /* Ena specific Tx Queue */ +#define IXGBE_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. wr-bk flushing */ +#define IXGBE_TXDCTL_WTHRESH_SHIFT 16 /* shift to WTHRESH bits */ +/* Enable short packet padding to 64 bytes */ +#define IXGBE_TX_PAD_ENABLE 0x00000400 +#define IXGBE_JUMBO_FRAME_ENABLE 0x00000004 /* Allow jumbo frames */ +/* This allows for 16K packets + 4k for vlan */ +#define IXGBE_MAX_FRAME_SZ 0x40040000 + +#define IXGBE_TDWBAL_HEAD_WB_ENABLE 0x1 /* Tx head write-back enable */ +#define IXGBE_TDWBAL_SEQNUM_WB_ENABLE 0x2 /* Tx seq# write-back enable */ + +/* Receive Config masks */ +#define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */ +#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Desc Monitor Bypass */ +#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Ena specific Rx Queue */ +#define IXGBE_RXDCTL_SWFLSH 0x04000000 /* Rx Desc wr-bk flushing */ +#define IXGBE_RXDCTL_RLPMLMASK 0x00003FFF /* X540 supported only */ +#define IXGBE_RXDCTL_RLPML_EN 0x00008000 +#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */ + +#define IXGBE_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ +#define IXGBE_TSYNCTXCTL_ENABLED 0x00000010 /* Tx timestamping enabled */ + +#define IXGBE_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ +#define IXGBE_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ +#define IXGBE_TSYNCRXCTL_TYPE_L2_V2 0x00 +#define IXGBE_TSYNCRXCTL_TYPE_L4_V1 0x02 +#define IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2 0x04 +#define IXGBE_TSYNCRXCTL_TYPE_EVENT_V2 0x0A +#define IXGBE_TSYNCRXCTL_ENABLED 0x00000010 /* Rx Timestamping enabled */ + +#define IXGBE_RXMTRL_V1_CTRLT_MASK 0x000000FF +#define IXGBE_RXMTRL_V1_SYNC_MSG 0x00 +#define IXGBE_RXMTRL_V1_DELAY_REQ_MSG 0x01 +#define IXGBE_RXMTRL_V1_FOLLOWUP_MSG 0x02 +#define IXGBE_RXMTRL_V1_DELAY_RESP_MSG 0x03 +#define IXGBE_RXMTRL_V1_MGMT_MSG 0x04 + +#define IXGBE_RXMTRL_V2_MSGID_MASK 0x0000FF00 +#define IXGBE_RXMTRL_V2_SYNC_MSG 0x0000 +#define IXGBE_RXMTRL_V2_DELAY_REQ_MSG 0x0100 +#define IXGBE_RXMTRL_V2_PDELAY_REQ_MSG 0x0200 +#define IXGBE_RXMTRL_V2_PDELAY_RESP_MSG 0x0300 +#define IXGBE_RXMTRL_V2_FOLLOWUP_MSG 0x0800 +#define IXGBE_RXMTRL_V2_DELAY_RESP_MSG 0x0900 +#define IXGBE_RXMTRL_V2_PDELAY_FOLLOWUP_MSG 0x0A00 +#define IXGBE_RXMTRL_V2_ANNOUNCE_MSG 0x0B00 +#define IXGBE_RXMTRL_V2_SIGNALLING_MSG 0x0C00 +#define IXGBE_RXMTRL_V2_MGMT_MSG 0x0D00 + +#define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */ +#define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/ +#define IXGBE_FCTRL_UPE 0x00000200 /* Unicast Promiscuous Ena */ +#define IXGBE_FCTRL_BAM 0x00000400 /* Broadcast Accept Mode */ +#define IXGBE_FCTRL_PMCF 0x00001000 /* Pass MAC Control Frames */ +#define IXGBE_FCTRL_DPF 0x00002000 /* Discard Pause Frame */ +/* Receive Priority Flow Control Enable */ +#define IXGBE_FCTRL_RPFCE 0x00004000 +#define IXGBE_FCTRL_RFCE 0x00008000 /* Receive Flow Control Ena */ +#define IXGBE_MFLCN_PMCF 0x00000001 /* Pass MAC Control Frames */ +#define IXGBE_MFLCN_DPF 0x00000002 /* Discard Pause Frame */ +#define IXGBE_MFLCN_RPFCE 0x00000004 /* Receive Priority FC Enable */ +#define IXGBE_MFLCN_RFCE 0x00000008 /* Receive FC Enable */ +#define IXGBE_MFLCN_RPFCE_MASK 0x00000FF4 /* Rx Priority FC bitmap mask */ +#define IXGBE_MFLCN_RPFCE_SHIFT 4 /* Rx Priority FC bitmap shift */ + +/* Multiple Receive Queue Control */ +#define IXGBE_MRQC_RSSEN 0x00000001 /* RSS Enable */ +#define IXGBE_MRQC_MRQE_MASK 0xF /* Bits 3:0 */ +#define IXGBE_MRQC_RT8TCEN 0x00000002 /* 8 TC no RSS */ +#define IXGBE_MRQC_RT4TCEN 0x00000003 /* 4 TC no RSS */ +#define IXGBE_MRQC_RTRSS8TCEN 0x00000004 /* 8 TC w/ RSS */ +#define IXGBE_MRQC_RTRSS4TCEN 0x00000005 /* 4 TC w/ RSS */ +#define IXGBE_MRQC_VMDQEN 0x00000008 /* VMDq2 64 pools no RSS */ +#define IXGBE_MRQC_VMDQRSS32EN 0x0000000A /* VMDq2 32 pools w/ RSS */ +#define IXGBE_MRQC_VMDQRSS64EN 0x0000000B /* VMDq2 64 pools w/ RSS */ +#define IXGBE_MRQC_VMDQRT8TCEN 0x0000000C /* VMDq2/RT 16 pool 8 TC */ +#define IXGBE_MRQC_VMDQRT4TCEN 0x0000000D /* VMDq2/RT 32 pool 4 TC */ +#define IXGBE_MRQC_RSS_FIELD_MASK 0xFFFF0000 +#define IXGBE_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 +#define IXGBE_MRQC_RSS_FIELD_IPV4 0x00020000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP 0x00040000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_EX 0x00080000 +#define IXGBE_MRQC_RSS_FIELD_IPV6 0x00100000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 +#define IXGBE_MRQC_RSS_FIELD_IPV4_UDP 0x00400000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_UDP 0x00800000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP 0x01000000 +#define IXGBE_MRQC_L3L4TXSWEN 0x00008000 + +/* Queue Drop Enable */ +#define IXGBE_QDE_ENABLE 0x00000001 +#define IXGBE_QDE_IDX_MASK 0x00007F00 +#define IXGBE_QDE_IDX_SHIFT 8 +#define IXGBE_QDE_WRITE 0x00010000 +#define IXGBE_QDE_READ 0x00020000 + +#define IXGBE_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ +#define IXGBE_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ +#define IXGBE_TXD_CMD_EOP 0x01000000 /* End of Packet */ +#define IXGBE_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define IXGBE_TXD_CMD_IC 0x04000000 /* Insert Checksum */ +#define IXGBE_TXD_CMD_RS 0x08000000 /* Report Status */ +#define IXGBE_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */ +#define IXGBE_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ +#define IXGBE_TXD_STAT_DD 0x00000001 /* Descriptor Done */ + +#define IXGBE_RXDADV_IPSEC_STATUS_SECP 0x00020000 +#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000 +#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000 +#define IXGBE_RXDADV_IPSEC_ERROR_AUTH_FAILED 0x18000000 +#define IXGBE_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000 +/* Multiple Transmit Queue Command Register */ +#define IXGBE_MTQC_RT_ENA 0x1 /* DCB Enable */ +#define IXGBE_MTQC_VT_ENA 0x2 /* VMDQ2 Enable */ +#define IXGBE_MTQC_64Q_1PB 0x0 /* 64 queues 1 pack buffer */ +#define IXGBE_MTQC_32VF 0x8 /* 4 TX Queues per pool w/32VF's */ +#define IXGBE_MTQC_64VF 0x4 /* 2 TX Queues per pool w/64VF's */ +#define IXGBE_MTQC_4TC_4TQ 0x8 /* 4 TC if RT_ENA and VT_ENA */ +#define IXGBE_MTQC_8TC_8TQ 0xC /* 8 TC if RT_ENA or 8 TQ if VT_ENA */ + +/* Receive Descriptor bit definitions */ +#define IXGBE_RXD_STAT_DD 0x01 /* Descriptor Done */ +#define IXGBE_RXD_STAT_EOP 0x02 /* End of Packet */ +#define IXGBE_RXD_STAT_FLM 0x04 /* FDir Match */ +#define IXGBE_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define IXGBE_RXDADV_NEXTP_MASK 0x000FFFF0 /* Next Descriptor Index */ +#define IXGBE_RXDADV_NEXTP_SHIFT 0x00000004 +#define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ +#define IXGBE_RXD_STAT_L4CS 0x20 /* L4 xsum calculated */ +#define IXGBE_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ +#define IXGBE_RXD_STAT_PIF 0x80 /* passed in-exact filter */ +#define IXGBE_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */ +#define IXGBE_RXD_STAT_VEXT 0x200 /* 1st VLAN found */ +#define IXGBE_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ +#define IXGBE_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ +#define IXGBE_RXD_STAT_LLINT 0x800 /* Pkt caused Low Latency Interrupt */ +#define IXGBE_RXD_STAT_TS 0x10000 /* Time Stamp */ +#define IXGBE_RXD_STAT_SECP 0x20000 /* Security Processing */ +#define IXGBE_RXD_STAT_LB 0x40000 /* Loopback Status */ +#define IXGBE_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ +#define IXGBE_RXD_ERR_CE 0x01 /* CRC Error */ +#define IXGBE_RXD_ERR_LE 0x02 /* Length Error */ +#define IXGBE_RXD_ERR_PE 0x08 /* Packet Error */ +#define IXGBE_RXD_ERR_OSE 0x10 /* Oversize Error */ +#define IXGBE_RXD_ERR_USE 0x20 /* Undersize Error */ +#define IXGBE_RXD_ERR_TCPE 0x40 /* TCP/UDP Checksum Error */ +#define IXGBE_RXD_ERR_IPE 0x80 /* IP Checksum Error */ +#define IXGBE_RXDADV_ERR_MASK 0xfff00000 /* RDESC.ERRORS mask */ +#define IXGBE_RXDADV_ERR_SHIFT 20 /* RDESC.ERRORS shift */ +#define IXGBE_RXDADV_ERR_RXE 0x20000000 /* Any MAC Error */ +#define IXGBE_RXDADV_ERR_FCEOFE 0x80000000 /* FCoEFe/IPE */ +#define IXGBE_RXDADV_ERR_FCERR 0x00700000 /* FCERR/FDIRERR */ +#define IXGBE_RXDADV_ERR_FDIR_LEN 0x00100000 /* FDIR Length error */ +#define IXGBE_RXDADV_ERR_FDIR_DROP 0x00200000 /* FDIR Drop error */ +#define IXGBE_RXDADV_ERR_FDIR_COLL 0x00400000 /* FDIR Collision error */ +#define IXGBE_RXDADV_ERR_HBO 0x00800000 /*Header Buffer Overflow */ +#define IXGBE_RXDADV_ERR_CE 0x01000000 /* CRC Error */ +#define IXGBE_RXDADV_ERR_LE 0x02000000 /* Length Error */ +#define IXGBE_RXDADV_ERR_PE 0x08000000 /* Packet Error */ +#define IXGBE_RXDADV_ERR_OSE 0x10000000 /* Oversize Error */ +#define IXGBE_RXDADV_ERR_USE 0x20000000 /* Undersize Error */ +#define IXGBE_RXDADV_ERR_TCPE 0x40000000 /* TCP/UDP Checksum Error */ +#define IXGBE_RXDADV_ERR_IPE 0x80000000 /* IP Checksum Error */ +#define IXGBE_RXD_VLAN_ID_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ +#define IXGBE_RXD_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ +#define IXGBE_RXD_PRI_SHIFT 13 +#define IXGBE_RXD_CFI_MASK 0x1000 /* CFI is bit 12 */ +#define IXGBE_RXD_CFI_SHIFT 12 + +#define IXGBE_RXDADV_STAT_DD IXGBE_RXD_STAT_DD /* Done */ +#define IXGBE_RXDADV_STAT_EOP IXGBE_RXD_STAT_EOP /* End of Packet */ +#define IXGBE_RXDADV_STAT_FLM IXGBE_RXD_STAT_FLM /* FDir Match */ +#define IXGBE_RXDADV_STAT_VP IXGBE_RXD_STAT_VP /* IEEE VLAN Pkt */ +#define IXGBE_RXDADV_STAT_MASK 0x000fffff /* Stat/NEXTP: bit 0-19 */ +#define IXGBE_RXDADV_STAT_FCEOFS 0x00000040 /* FCoE EOF/SOF Stat */ +#define IXGBE_RXDADV_STAT_FCSTAT 0x00000030 /* FCoE Pkt Stat */ +#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH 0x00000000 /* 00: No Ctxt Match */ +#define IXGBE_RXDADV_STAT_FCSTAT_NODDP 0x00000010 /* 01: Ctxt w/o DDP */ +#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */ +#define IXGBE_RXDADV_STAT_FCSTAT_DDP 0x00000030 /* 11: Ctxt w/ DDP */ +#define IXGBE_RXDADV_STAT_TS 0x00010000 /* IEEE1588 Time Stamp */ + +/* PSRTYPE bit definitions */ +#define IXGBE_PSRTYPE_TCPHDR 0x00000010 +#define IXGBE_PSRTYPE_UDPHDR 0x00000020 +#define IXGBE_PSRTYPE_IPV4HDR 0x00000100 +#define IXGBE_PSRTYPE_IPV6HDR 0x00000200 +#define IXGBE_PSRTYPE_L2HDR 0x00001000 + +/* SRRCTL bit definitions */ +#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */ +#define IXGBE_SRRCTL_RDMTS_SHIFT 22 +#define IXGBE_SRRCTL_RDMTS_MASK 0x01C00000 +#define IXGBE_SRRCTL_DROP_EN 0x10000000 +#define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F +#define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00 +#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000 +#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 +#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 +#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000 +#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 +#define IXGBE_SRRCTL_DESCTYPE_MASK 0x0E000000 + +#define IXGBE_RXDPS_HDRSTAT_HDRSP 0x00008000 +#define IXGBE_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF + +#define IXGBE_RXDADV_RSSTYPE_MASK 0x0000000F +#define IXGBE_RXDADV_PKTTYPE_MASK 0x0000FFF0 +#define IXGBE_RXDADV_PKTTYPE_MASK_EX 0x0001FFF0 +#define IXGBE_RXDADV_HDRBUFLEN_MASK 0x00007FE0 +#define IXGBE_RXDADV_RSCCNT_MASK 0x001E0000 +#define IXGBE_RXDADV_RSCCNT_SHIFT 17 +#define IXGBE_RXDADV_HDRBUFLEN_SHIFT 5 +#define IXGBE_RXDADV_SPLITHEADER_EN 0x00001000 +#define IXGBE_RXDADV_SPH 0x8000 + +/* RSS Hash results */ +#define IXGBE_RXDADV_RSSTYPE_NONE 0x00000000 +#define IXGBE_RXDADV_RSSTYPE_IPV4_TCP 0x00000001 +#define IXGBE_RXDADV_RSSTYPE_IPV4 0x00000002 +#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP 0x00000003 +#define IXGBE_RXDADV_RSSTYPE_IPV6_EX 0x00000004 +#define IXGBE_RXDADV_RSSTYPE_IPV6 0x00000005 +#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006 +#define IXGBE_RXDADV_RSSTYPE_IPV4_UDP 0x00000007 +#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP 0x00000008 +#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009 + +/* RSS Packet Types as indicated in the receive descriptor. */ +#define IXGBE_RXDADV_PKTTYPE_NONE 0x00000000 +#define IXGBE_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPv4 hdr present */ +#define IXGBE_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPv4 hdr + extensions */ +#define IXGBE_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPv6 hdr present */ +#define IXGBE_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPv6 hdr + extensions */ +#define IXGBE_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */ +#define IXGBE_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */ +#define IXGBE_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */ +#define IXGBE_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */ +#define IXGBE_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */ +#define IXGBE_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */ +#define IXGBE_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */ +#define IXGBE_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */ +#define IXGBE_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */ +#define IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */ + +/* Security Processing bit Indication */ +#define IXGBE_RXDADV_LNKSEC_STATUS_SECP 0x00020000 +#define IXGBE_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000 +#define IXGBE_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000 +#define IXGBE_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000 +#define IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000 + +/* Masks to determine if packets should be dropped due to frame errors */ +#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \ + IXGBE_RXD_ERR_CE | \ + IXGBE_RXD_ERR_LE | \ + IXGBE_RXD_ERR_PE | \ + IXGBE_RXD_ERR_OSE | \ + IXGBE_RXD_ERR_USE) + +#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \ + IXGBE_RXDADV_ERR_CE | \ + IXGBE_RXDADV_ERR_LE | \ + IXGBE_RXDADV_ERR_PE | \ + IXGBE_RXDADV_ERR_OSE | \ + IXGBE_RXDADV_ERR_USE) + +#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK_82599 IXGBE_RXDADV_ERR_RXE + +/* Multicast bit mask */ +#define IXGBE_MCSTCTRL_MFE 0x4 + +/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ +#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE 8 +#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE 8 +#define IXGBE_REQ_TX_BUFFER_GRANULARITY 1024 + +/* Vlan-specific macros */ +#define IXGBE_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID in lower 12 bits */ +#define IXGBE_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority in upper 3 bits */ +#define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority in upper 3 of 16 */ +#define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT IXGBE_RX_DESC_SPECIAL_PRI_SHIFT + +/* SR-IOV specific macros */ +#define IXGBE_MBVFICR_INDEX(vf_number) (vf_number >> 4) +#define IXGBE_MBVFICR(_i) (0x00710 + ((_i) * 4)) +#define IXGBE_VFLRE(_i) (((_i & 1) ? 0x001C0 : 0x00600)) +#define IXGBE_VFLREC(_i) (0x00700 + ((_i) * 4)) +/* Translated register #defines */ +#define IXGBE_PVFCTRL(P) (0x00300 + (4 * (P))) +#define IXGBE_PVFSTATUS(P) (0x00008 + (0 * (P))) +#define IXGBE_PVFLINKS(P) (0x042A4 + (0 * (P))) +#define IXGBE_PVFRTIMER(P) (0x00048 + (0 * (P))) +#define IXGBE_PVFMAILBOX(P) (0x04C00 + (4 * (P))) +#define IXGBE_PVFRXMEMWRAP(P) (0x03190 + (0 * (P))) +#define IXGBE_PVTEICR(P) (0x00B00 + (4 * (P))) +#define IXGBE_PVTEICS(P) (0x00C00 + (4 * (P))) +#define IXGBE_PVTEIMS(P) (0x00D00 + (4 * (P))) +#define IXGBE_PVTEIMC(P) (0x00E00 + (4 * (P))) +#define IXGBE_PVTEIAC(P) (0x00F00 + (4 * (P))) +#define IXGBE_PVTEIAM(P) (0x04D00 + (4 * (P))) +#define IXGBE_PVTEITR(P) (((P) < 24) ? (0x00820 + ((P) * 4)) : \ + (0x012300 + (((P) - 24) * 4))) +#define IXGBE_PVTIVAR(P) (0x12500 + (4 * (P))) +#define IXGBE_PVTIVAR_MISC(P) (0x04E00 + (4 * (P))) +#define IXGBE_PVTRSCINT(P) (0x12000 + (4 * (P))) +#define IXGBE_VFPBACL(P) (0x110C8 + (4 * (P))) +#define IXGBE_PVFRDBAL(P) ((P < 64) ? (0x01000 + (0x40 * (P))) \ + : (0x0D000 + (0x40 * ((P) - 64)))) +#define IXGBE_PVFRDBAH(P) ((P < 64) ? (0x01004 + (0x40 * (P))) \ + : (0x0D004 + (0x40 * ((P) - 64)))) +#define IXGBE_PVFRDLEN(P) ((P < 64) ? (0x01008 + (0x40 * (P))) \ + : (0x0D008 + (0x40 * ((P) - 64)))) +#define IXGBE_PVFRDH(P) ((P < 64) ? (0x01010 + (0x40 * (P))) \ + : (0x0D010 + (0x40 * ((P) - 64)))) +#define IXGBE_PVFRDT(P) ((P < 64) ? (0x01018 + (0x40 * (P))) \ + : (0x0D018 + (0x40 * ((P) - 64)))) +#define IXGBE_PVFRXDCTL(P) ((P < 64) ? (0x01028 + (0x40 * (P))) \ + : (0x0D028 + (0x40 * ((P) - 64)))) +#define IXGBE_PVFSRRCTL(P) ((P < 64) ? (0x01014 + (0x40 * (P))) \ + : (0x0D014 + (0x40 * ((P) - 64)))) +#define IXGBE_PVFPSRTYPE(P) (0x0EA00 + (4 * (P))) +#define IXGBE_PVFTDBAL(P) (0x06000 + (0x40 * (P))) +#define IXGBE_PVFTDBAH(P) (0x06004 + (0x40 * (P))) +#define IXGBE_PVFTTDLEN(P) (0x06008 + (0x40 * (P))) +#define IXGBE_PVFTDH(P) (0x06010 + (0x40 * (P))) +#define IXGBE_PVFTDT(P) (0x06018 + (0x40 * (P))) +#define IXGBE_PVFTXDCTL(P) (0x06028 + (0x40 * (P))) +#define IXGBE_PVFTDWBAL(P) (0x06038 + (0x40 * (P))) +#define IXGBE_PVFTDWBAH(P) (0x0603C + (0x40 * (P))) +#define IXGBE_PVFDCA_RXCTRL(P) (((P) < 64) ? (0x0100C + (0x40 * (P))) \ + : (0x0D00C + (0x40 * ((P) - 64)))) +#define IXGBE_PVFDCA_TXCTRL(P) (0x0600C + (0x40 * (P))) +#define IXGBE_PVFGPRC(x) (0x0101C + (0x40 * (x))) +#define IXGBE_PVFGPTC(x) (0x08300 + (0x04 * (x))) +#define IXGBE_PVFGORC_LSB(x) (0x01020 + (0x40 * (x))) +#define IXGBE_PVFGORC_MSB(x) (0x0D020 + (0x40 * (x))) +#define IXGBE_PVFGOTC_LSB(x) (0x08400 + (0x08 * (x))) +#define IXGBE_PVFGOTC_MSB(x) (0x08404 + (0x08 * (x))) +#define IXGBE_PVFMPRC(x) (0x0D01C + (0x40 * (x))) + +#define IXGBE_PVFTDWBALn(q_per_pool, vf_number, vf_q_index) \ + (IXGBE_PVFTDWBAL((q_per_pool)*(vf_number) + (vf_q_index))) +#define IXGBE_PVFTDWBAHn(q_per_pool, vf_number, vf_q_index) \ + (IXGBE_PVFTDWBAH((q_per_pool)*(vf_number) + (vf_q_index))) + +/* Little Endian defines */ +#ifndef __le16 +#define __le16 u16 +#endif +#ifndef __le32 +#define __le32 u32 +#endif +#ifndef __le64 +#define __le64 u64 + +#endif +#ifndef __be16 +/* Big Endian defines */ +#define __be16 u16 +#define __be32 u32 +#define __be64 u64 + +#endif +enum ixgbe_fdir_pballoc_type { + IXGBE_FDIR_PBALLOC_NONE = 0, + IXGBE_FDIR_PBALLOC_64K = 1, + IXGBE_FDIR_PBALLOC_128K = 2, + IXGBE_FDIR_PBALLOC_256K = 3, +}; + +/* Flow Director register values */ +#define IXGBE_FDIRCTRL_PBALLOC_64K 0x00000001 +#define IXGBE_FDIRCTRL_PBALLOC_128K 0x00000002 +#define IXGBE_FDIRCTRL_PBALLOC_256K 0x00000003 +#define IXGBE_FDIRCTRL_INIT_DONE 0x00000008 +#define IXGBE_FDIRCTRL_PERFECT_MATCH 0x00000010 +#define IXGBE_FDIRCTRL_REPORT_STATUS 0x00000020 +#define IXGBE_FDIRCTRL_REPORT_STATUS_ALWAYS 0x00000080 +#define IXGBE_FDIRCTRL_DROP_Q_SHIFT 8 +#define IXGBE_FDIRCTRL_FLEX_SHIFT 16 +#define IXGBE_FDIRCTRL_SEARCHLIM 0x00800000 +#define IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT 24 +#define IXGBE_FDIRCTRL_FULL_THRESH_MASK 0xF0000000 +#define IXGBE_FDIRCTRL_FULL_THRESH_SHIFT 28 + +#define IXGBE_FDIRTCPM_DPORTM_SHIFT 16 +#define IXGBE_FDIRUDPM_DPORTM_SHIFT 16 +#define IXGBE_FDIRIP6M_DIPM_SHIFT 16 +#define IXGBE_FDIRM_VLANID 0x00000001 +#define IXGBE_FDIRM_VLANP 0x00000002 +#define IXGBE_FDIRM_POOL 0x00000004 +#define IXGBE_FDIRM_L4P 0x00000008 +#define IXGBE_FDIRM_FLEX 0x00000010 +#define IXGBE_FDIRM_DIPv6 0x00000020 + +#define IXGBE_FDIRFREE_FREE_MASK 0xFFFF +#define IXGBE_FDIRFREE_FREE_SHIFT 0 +#define IXGBE_FDIRFREE_COLL_MASK 0x7FFF0000 +#define IXGBE_FDIRFREE_COLL_SHIFT 16 +#define IXGBE_FDIRLEN_MAXLEN_MASK 0x3F +#define IXGBE_FDIRLEN_MAXLEN_SHIFT 0 +#define IXGBE_FDIRLEN_MAXHASH_MASK 0x7FFF0000 +#define IXGBE_FDIRLEN_MAXHASH_SHIFT 16 +#define IXGBE_FDIRUSTAT_ADD_MASK 0xFFFF +#define IXGBE_FDIRUSTAT_ADD_SHIFT 0 +#define IXGBE_FDIRUSTAT_REMOVE_MASK 0xFFFF0000 +#define IXGBE_FDIRUSTAT_REMOVE_SHIFT 16 +#define IXGBE_FDIRFSTAT_FADD_MASK 0x00FF +#define IXGBE_FDIRFSTAT_FADD_SHIFT 0 +#define IXGBE_FDIRFSTAT_FREMOVE_MASK 0xFF00 +#define IXGBE_FDIRFSTAT_FREMOVE_SHIFT 8 +#define IXGBE_FDIRPORT_DESTINATION_SHIFT 16 +#define IXGBE_FDIRVLAN_FLEX_SHIFT 16 +#define IXGBE_FDIRHASH_BUCKET_VALID_SHIFT 15 +#define IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT 16 + +#define IXGBE_FDIRCMD_CMD_MASK 0x00000003 +#define IXGBE_FDIRCMD_CMD_ADD_FLOW 0x00000001 +#define IXGBE_FDIRCMD_CMD_REMOVE_FLOW 0x00000002 +#define IXGBE_FDIRCMD_CMD_QUERY_REM_FILT 0x00000003 +#define IXGBE_FDIRCMD_FILTER_VALID 0x00000004 +#define IXGBE_FDIRCMD_FILTER_UPDATE 0x00000008 +#define IXGBE_FDIRCMD_IPv6DMATCH 0x00000010 +#define IXGBE_FDIRCMD_L4TYPE_UDP 0x00000020 +#define IXGBE_FDIRCMD_L4TYPE_TCP 0x00000040 +#define IXGBE_FDIRCMD_L4TYPE_SCTP 0x00000060 +#define IXGBE_FDIRCMD_IPV6 0x00000080 +#define IXGBE_FDIRCMD_CLEARHT 0x00000100 +#define IXGBE_FDIRCMD_DROP 0x00000200 +#define IXGBE_FDIRCMD_INT 0x00000400 +#define IXGBE_FDIRCMD_LAST 0x00000800 +#define IXGBE_FDIRCMD_COLLISION 0x00001000 +#define IXGBE_FDIRCMD_QUEUE_EN 0x00008000 +#define IXGBE_FDIRCMD_FLOW_TYPE_SHIFT 5 +#define IXGBE_FDIRCMD_RX_QUEUE_SHIFT 16 +#define IXGBE_FDIRCMD_VT_POOL_SHIFT 24 +#define IXGBE_FDIR_INIT_DONE_POLL 10 +#define IXGBE_FDIRCMD_CMD_POLL 10 + +#define IXGBE_FDIR_DROP_QUEUE 127 + +#define IXGBE_STATUS_OVERHEATING_BIT 20 /* STATUS overtemp bit num */ + +/* Manageablility Host Interface defines */ +#define IXGBE_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */ +#define IXGBE_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */ +#define IXGBE_HI_COMMAND_TIMEOUT 500 /* Process HI command limit */ + +/* CEM Support */ +#define FW_CEM_HDR_LEN 0x4 +#define FW_CEM_CMD_DRIVER_INFO 0xDD +#define FW_CEM_CMD_DRIVER_INFO_LEN 0x5 +#define FW_CEM_CMD_RESERVED 0X0 +#define FW_CEM_UNUSED_VER 0x0 +#define FW_CEM_MAX_RETRIES 3 +#define FW_CEM_RESP_STATUS_SUCCESS 0x1 + +/* Host Interface Command Structures */ + +struct ixgbe_hic_hdr { + u8 cmd; + u8 buf_len; + union { + u8 cmd_resv; + u8 ret_status; + } cmd_or_resp; + u8 checksum; +}; + +struct ixgbe_hic_drv_info { + struct ixgbe_hic_hdr hdr; + u8 port_num; + u8 ver_sub; + u8 ver_build; + u8 ver_min; + u8 ver_maj; + u8 pad; /* end spacing to ensure length is mult. of dword */ + u16 pad2; /* end spacing to ensure length is mult. of dword2 */ +}; + +/* Transmit Descriptor - Legacy */ +struct ixgbe_legacy_tx_desc { + u64 buffer_addr; /* Address of the descriptor's data buffer */ + union { + __le32 data; + struct { + __le16 length; /* Data buffer length */ + u8 cso; /* Checksum offset */ + u8 cmd; /* Descriptor control */ + } flags; + } lower; + union { + __le32 data; + struct { + u8 status; /* Descriptor status */ + u8 css; /* Checksum start */ + __le16 vlan; + } fields; + } upper; +}; + +/* Transmit Descriptor - Advanced */ +union ixgbe_adv_tx_desc { + struct { + __le64 buffer_addr; /* Address of descriptor's data buf */ + __le32 cmd_type_len; + __le32 olinfo_status; + } read; + struct { + __le64 rsvd; /* Reserved */ + __le32 nxtseq_seed; + __le32 status; + } wb; +}; + +/* Receive Descriptor - Legacy */ +struct ixgbe_legacy_rx_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + __le16 length; /* Length of data DMAed into data buffer */ + __le16 csum; /* Packet checksum */ + u8 status; /* Descriptor status */ + u8 errors; /* Descriptor Errors */ + __le16 vlan; +}; + +/* Receive Descriptor - Advanced */ +union ixgbe_adv_rx_desc { + struct { + __le64 pkt_addr; /* Packet buffer address */ + __le64 hdr_addr; /* Header buffer address */ + } read; + struct { + struct { + union { + __le32 data; + struct { + __le16 pkt_info; /* RSS, Pkt type */ + __le16 hdr_info; /* Splithdr, hdrlen */ + } hs_rss; + } lo_dword; + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length; /* Packet length */ + __le16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +/* Context descriptors */ +struct ixgbe_adv_tx_context_desc { + __le32 vlan_macip_lens; + __le32 seqnum_seed; + __le32 type_tucmd_mlhl; + __le32 mss_l4len_idx; +}; + +/* Adv Transmit Descriptor Config Masks */ +#define IXGBE_ADVTXD_DTALEN_MASK 0x0000FFFF /* Data buf length(bytes) */ +#define IXGBE_ADVTXD_MAC_LINKSEC 0x00040000 /* Insert LinkSec */ +#define IXGBE_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 time stamp */ +#define IXGBE_ADVTXD_IPSEC_SA_INDEX_MASK 0x000003FF /* IPSec SA index */ +#define IXGBE_ADVTXD_IPSEC_ESP_LEN_MASK 0x000001FF /* IPSec ESP length */ +#define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */ +#define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Adv Context Desc */ +#define IXGBE_ADVTXD_DTYP_DATA 0x00300000 /* Adv Data Descriptor */ +#define IXGBE_ADVTXD_DCMD_EOP IXGBE_TXD_CMD_EOP /* End of Packet */ +#define IXGBE_ADVTXD_DCMD_IFCS IXGBE_TXD_CMD_IFCS /* Insert FCS */ +#define IXGBE_ADVTXD_DCMD_RS IXGBE_TXD_CMD_RS /* Report Status */ +#define IXGBE_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */ +#define IXGBE_ADVTXD_DCMD_DEXT IXGBE_TXD_CMD_DEXT /* Desc ext 1=Adv */ +#define IXGBE_ADVTXD_DCMD_VLE IXGBE_TXD_CMD_VLE /* VLAN pkt enable */ +#define IXGBE_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ +#define IXGBE_ADVTXD_STAT_DD IXGBE_TXD_STAT_DD /* Descriptor Done */ +#define IXGBE_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED pres in WB */ +#define IXGBE_ADVTXD_STAT_RSV 0x0000000C /* STA Reserved */ +#define IXGBE_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */ +#define IXGBE_ADVTXD_CC 0x00000080 /* Check Context */ +#define IXGBE_ADVTXD_POPTS_SHIFT 8 /* Adv desc POPTS shift */ +#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \ + IXGBE_ADVTXD_POPTS_SHIFT) +#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \ + IXGBE_ADVTXD_POPTS_SHIFT) +#define IXGBE_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */ +#define IXGBE_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */ +#define IXGBE_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */ +/* 1st&Last TSO-full iSCSI PDU */ +#define IXGBE_ADVTXD_POPTS_ISCO_FULL 0x00001800 +#define IXGBE_ADVTXD_POPTS_RSV 0x00002000 /* POPTS Reserved */ +#define IXGBE_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ +#define IXGBE_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ +#define IXGBE_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */ +#define IXGBE_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ +#define IXGBE_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */ +#define IXGBE_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */ +#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ +#define IXGBE_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */ +#define IXGBE_ADVTXD_TUCMD_MKRREQ 0x00002000 /* req Markers and CRC */ +#define IXGBE_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */ +#define IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */ +#define IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000/* ESP Encrypt Enable */ +#define IXGBE_ADVTXT_TUCMD_FCOE 0x00008000 /* FCoE Frame Type */ +#define IXGBE_ADVTXD_FCOEF_EOF_MASK (0x3 << 10) /* FC EOF index */ +#define IXGBE_ADVTXD_FCOEF_SOF ((1 << 2) << 10) /* FC SOF index */ +#define IXGBE_ADVTXD_FCOEF_PARINC ((1 << 3) << 10) /* Rel_Off in F_CTL */ +#define IXGBE_ADVTXD_FCOEF_ORIE ((1 << 4) << 10) /* Orientation End */ +#define IXGBE_ADVTXD_FCOEF_ORIS ((1 << 5) << 10) /* Orientation Start */ +#define IXGBE_ADVTXD_FCOEF_EOF_N (0x0 << 10) /* 00: EOFn */ +#define IXGBE_ADVTXD_FCOEF_EOF_T (0x1 << 10) /* 01: EOFt */ +#define IXGBE_ADVTXD_FCOEF_EOF_NI (0x2 << 10) /* 10: EOFni */ +#define IXGBE_ADVTXD_FCOEF_EOF_A (0x3 << 10) /* 11: EOFa */ +#define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ +#define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ + +/* Autonegotiation advertised speeds */ +typedef u32 ixgbe_autoneg_advertised; +/* Link speed */ +typedef u32 ixgbe_link_speed; +#define IXGBE_LINK_SPEED_UNKNOWN 0 +#define IXGBE_LINK_SPEED_100_FULL 0x0008 +#define IXGBE_LINK_SPEED_1GB_FULL 0x0020 +#define IXGBE_LINK_SPEED_10GB_FULL 0x0080 +#define IXGBE_LINK_SPEED_82598_AUTONEG (IXGBE_LINK_SPEED_1GB_FULL | \ + IXGBE_LINK_SPEED_10GB_FULL) +#define IXGBE_LINK_SPEED_82599_AUTONEG (IXGBE_LINK_SPEED_100_FULL | \ + IXGBE_LINK_SPEED_1GB_FULL | \ + IXGBE_LINK_SPEED_10GB_FULL) + + +/* Physical layer type */ +typedef u32 ixgbe_physical_layer; +#define IXGBE_PHYSICAL_LAYER_UNKNOWN 0 +#define IXGBE_PHYSICAL_LAYER_10GBASE_T 0x0001 +#define IXGBE_PHYSICAL_LAYER_1000BASE_T 0x0002 +#define IXGBE_PHYSICAL_LAYER_100BASE_TX 0x0004 +#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU 0x0008 +#define IXGBE_PHYSICAL_LAYER_10GBASE_LR 0x0010 +#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM 0x0020 +#define IXGBE_PHYSICAL_LAYER_10GBASE_SR 0x0040 +#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4 0x0080 +#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4 0x0100 +#define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x0200 +#define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x0400 +#define IXGBE_PHYSICAL_LAYER_10GBASE_KR 0x0800 +#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000 +#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000 +#define IXGBE_PHYSICAL_LAYER_1000BASE_SX 0x4000 + +/* Flow Control Data Sheet defined values + * Calculation and defines taken from 802.1bb Annex O + */ + +/* BitTimes (BT) conversion */ +#define IXGBE_BT2KB(BT) ((BT + (8 * 1024 - 1)) / (8 * 1024)) +#define IXGBE_B2BT(BT) (BT * 8) + +/* Calculate Delay to respond to PFC */ +#define IXGBE_PFC_D 672 + +/* Calculate Cable Delay */ +#define IXGBE_CABLE_DC 5556 /* Delay Copper */ +#define IXGBE_CABLE_DO 5000 /* Delay Optical */ + +/* Calculate Interface Delay X540 */ +#define IXGBE_PHY_DC 25600 /* Delay 10G BASET */ +#define IXGBE_MAC_DC 8192 /* Delay Copper XAUI interface */ +#define IXGBE_XAUI_DC (2 * 2048) /* Delay Copper Phy */ + +#define IXGBE_ID_X540 (IXGBE_MAC_DC + IXGBE_XAUI_DC + IXGBE_PHY_DC) + +/* Calculate Interface Delay 82598, 82599 */ +#define IXGBE_PHY_D 12800 +#define IXGBE_MAC_D 4096 +#define IXGBE_XAUI_D (2 * 1024) + +#define IXGBE_ID (IXGBE_MAC_D + IXGBE_XAUI_D + IXGBE_PHY_D) + +/* Calculate Delay incurred from higher layer */ +#define IXGBE_HD 6144 + +/* Calculate PCI Bus delay for low thresholds */ +#define IXGBE_PCI_DELAY 10000 + +/* Calculate X540 delay value in bit times */ +#define IXGBE_DV_X540(_max_frame_link, _max_frame_tc) \ + ((36 * \ + (IXGBE_B2BT(_max_frame_link) + \ + IXGBE_PFC_D + \ + (2 * IXGBE_CABLE_DC) + \ + (2 * IXGBE_ID_X540) + \ + IXGBE_HD) / 25 + 1) + \ + 2 * IXGBE_B2BT(_max_frame_tc)) + +/* Calculate 82599, 82598 delay value in bit times */ +#define IXGBE_DV(_max_frame_link, _max_frame_tc) \ + ((36 * \ + (IXGBE_B2BT(_max_frame_link) + \ + IXGBE_PFC_D + \ + (2 * IXGBE_CABLE_DC) + \ + (2 * IXGBE_ID) + \ + IXGBE_HD) / 25 + 1) + \ + 2 * IXGBE_B2BT(_max_frame_tc)) + +/* Calculate low threshold delay values */ +#define IXGBE_LOW_DV_X540(_max_frame_tc) \ + (2 * IXGBE_B2BT(_max_frame_tc) + \ + (36 * IXGBE_PCI_DELAY / 25) + 1) +#define IXGBE_LOW_DV(_max_frame_tc) \ + (2 * IXGBE_LOW_DV_X540(_max_frame_tc)) + +/* Software ATR hash keys */ +#define IXGBE_ATR_BUCKET_HASH_KEY 0x3DAD14E2 +#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x174D3614 + +/* Software ATR input stream values and masks */ +#define IXGBE_ATR_HASH_MASK 0x7fff +#define IXGBE_ATR_L4TYPE_MASK 0x3 +#define IXGBE_ATR_L4TYPE_UDP 0x1 +#define IXGBE_ATR_L4TYPE_TCP 0x2 +#define IXGBE_ATR_L4TYPE_SCTP 0x3 +#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4 +enum ixgbe_atr_flow_type { + IXGBE_ATR_FLOW_TYPE_IPV4 = 0x0, + IXGBE_ATR_FLOW_TYPE_UDPV4 = 0x1, + IXGBE_ATR_FLOW_TYPE_TCPV4 = 0x2, + IXGBE_ATR_FLOW_TYPE_SCTPV4 = 0x3, + IXGBE_ATR_FLOW_TYPE_IPV6 = 0x4, + IXGBE_ATR_FLOW_TYPE_UDPV6 = 0x5, + IXGBE_ATR_FLOW_TYPE_TCPV6 = 0x6, + IXGBE_ATR_FLOW_TYPE_SCTPV6 = 0x7, +}; + +/* Flow Director ATR input struct. */ +union ixgbe_atr_input { + /* + * Byte layout in order, all values with MSB first: + * + * vm_pool - 1 byte + * flow_type - 1 byte + * vlan_id - 2 bytes + * src_ip - 16 bytes + * dst_ip - 16 bytes + * src_port - 2 bytes + * dst_port - 2 bytes + * flex_bytes - 2 bytes + * bkt_hash - 2 bytes + */ + struct { + u8 vm_pool; + u8 flow_type; + __be16 vlan_id; + __be32 dst_ip[4]; + __be32 src_ip[4]; + __be16 src_port; + __be16 dst_port; + __be16 flex_bytes; + __be16 bkt_hash; + } formatted; + __be32 dword_stream[11]; +}; + +/* Flow Director compressed ATR hash input struct */ +union ixgbe_atr_hash_dword { + struct { + u8 vm_pool; + u8 flow_type; + __be16 vlan_id; + } formatted; + __be32 ip; + struct { + __be16 src; + __be16 dst; + } port; + __be16 flex_bytes; + __be32 dword; +}; + + +/* + * Unavailable: The FCoE Boot Option ROM is not present in the flash. + * Disabled: Present; boot order is not set for any targets on the port. + * Enabled: Present; boot order is set for at least one target on the port. + */ +enum ixgbe_fcoe_boot_status { + ixgbe_fcoe_bootstatus_disabled = 0, + ixgbe_fcoe_bootstatus_enabled = 1, + ixgbe_fcoe_bootstatus_unavailable = 0xFFFF +}; + +enum ixgbe_eeprom_type { + ixgbe_eeprom_uninitialized = 0, + ixgbe_eeprom_spi, + ixgbe_flash, + ixgbe_eeprom_none /* No NVM support */ +}; + +enum ixgbe_mac_type { + ixgbe_mac_unknown = 0, + ixgbe_mac_82598EB, + ixgbe_mac_82599EB, + ixgbe_mac_X540, + ixgbe_num_macs +}; + +enum ixgbe_phy_type { + ixgbe_phy_unknown = 0, + ixgbe_phy_none, + ixgbe_phy_tn, + ixgbe_phy_aq, + ixgbe_phy_cu_unknown, + ixgbe_phy_qt, + ixgbe_phy_xaui, + ixgbe_phy_nl, + ixgbe_phy_sfp_passive_tyco, + ixgbe_phy_sfp_passive_unknown, + ixgbe_phy_sfp_active_unknown, + ixgbe_phy_sfp_avago, + ixgbe_phy_sfp_ftl, + ixgbe_phy_sfp_ftl_active, + ixgbe_phy_sfp_unknown, + ixgbe_phy_sfp_intel, + ixgbe_phy_sfp_unsupported, /*Enforce bit set with unsupported module*/ + ixgbe_phy_generic +}; + +/* + * SFP+ module type IDs: + * + * ID Module Type + * ============= + * 0 SFP_DA_CU + * 1 SFP_SR + * 2 SFP_LR + * 3 SFP_DA_CU_CORE0 - 82599-specific + * 4 SFP_DA_CU_CORE1 - 82599-specific + * 5 SFP_SR/LR_CORE0 - 82599-specific + * 6 SFP_SR/LR_CORE1 - 82599-specific + */ +enum ixgbe_sfp_type { + ixgbe_sfp_type_da_cu = 0, + ixgbe_sfp_type_sr = 1, + ixgbe_sfp_type_lr = 2, + ixgbe_sfp_type_da_cu_core0 = 3, + ixgbe_sfp_type_da_cu_core1 = 4, + ixgbe_sfp_type_srlr_core0 = 5, + ixgbe_sfp_type_srlr_core1 = 6, + ixgbe_sfp_type_da_act_lmt_core0 = 7, + ixgbe_sfp_type_da_act_lmt_core1 = 8, + ixgbe_sfp_type_1g_cu_core0 = 9, + ixgbe_sfp_type_1g_cu_core1 = 10, + ixgbe_sfp_type_1g_sx_core0 = 11, + ixgbe_sfp_type_1g_sx_core1 = 12, + ixgbe_sfp_type_not_present = 0xFFFE, + ixgbe_sfp_type_unknown = 0xFFFF +}; + +enum ixgbe_media_type { + ixgbe_media_type_unknown = 0, + ixgbe_media_type_fiber, + ixgbe_media_type_fiber_qsfp, + ixgbe_media_type_fiber_lco, + ixgbe_media_type_copper, + ixgbe_media_type_backplane, + ixgbe_media_type_cx4, + ixgbe_media_type_virtual +}; + +/* Flow Control Settings */ +enum ixgbe_fc_mode { + ixgbe_fc_none = 0, + ixgbe_fc_rx_pause, + ixgbe_fc_tx_pause, + ixgbe_fc_full, + ixgbe_fc_default +}; + +/* Smart Speed Settings */ +#define IXGBE_SMARTSPEED_MAX_RETRIES 3 +enum ixgbe_smart_speed { + ixgbe_smart_speed_auto = 0, + ixgbe_smart_speed_on, + ixgbe_smart_speed_off +}; + +/* PCI bus types */ +enum ixgbe_bus_type { + ixgbe_bus_type_unknown = 0, + ixgbe_bus_type_pci, + ixgbe_bus_type_pcix, + ixgbe_bus_type_pci_express, + ixgbe_bus_type_reserved +}; + +/* PCI bus speeds */ +enum ixgbe_bus_speed { + ixgbe_bus_speed_unknown = 0, + ixgbe_bus_speed_33 = 33, + ixgbe_bus_speed_66 = 66, + ixgbe_bus_speed_100 = 100, + ixgbe_bus_speed_120 = 120, + ixgbe_bus_speed_133 = 133, + ixgbe_bus_speed_2500 = 2500, + ixgbe_bus_speed_5000 = 5000, + ixgbe_bus_speed_8000 = 8000, + ixgbe_bus_speed_reserved +}; + +/* PCI bus widths */ +enum ixgbe_bus_width { + ixgbe_bus_width_unknown = 0, + ixgbe_bus_width_pcie_x1 = 1, + ixgbe_bus_width_pcie_x2 = 2, + ixgbe_bus_width_pcie_x4 = 4, + ixgbe_bus_width_pcie_x8 = 8, + ixgbe_bus_width_32 = 32, + ixgbe_bus_width_64 = 64, + ixgbe_bus_width_reserved +}; + +struct ixgbe_addr_filter_info { + u32 num_mc_addrs; + u32 rar_used_count; + u32 mta_in_use; + u32 overflow_promisc; + bool user_set_promisc; +}; + +/* Bus parameters */ +struct ixgbe_bus_info { + enum ixgbe_bus_speed speed; + enum ixgbe_bus_width width; + enum ixgbe_bus_type type; + + u16 func; + u16 lan_id; +}; + +/* Flow control parameters */ +struct ixgbe_fc_info { + u32 high_water[IXGBE_DCB_MAX_TRAFFIC_CLASS]; /* Flow Ctrl High-water */ + u32 low_water[IXGBE_DCB_MAX_TRAFFIC_CLASS]; /* Flow Ctrl Low-water */ + u16 pause_time; /* Flow Control Pause timer */ + bool send_xon; /* Flow control send XON */ + bool strict_ieee; /* Strict IEEE mode */ + bool disable_fc_autoneg; /* Do not autonegotiate FC */ + bool fc_was_autonegged; /* Is current_mode the result of autonegging? */ + enum ixgbe_fc_mode current_mode; /* FC mode in effect */ + enum ixgbe_fc_mode requested_mode; /* FC mode requested by caller */ +}; + +/* Statistics counters collected by the MAC */ +struct ixgbe_hw_stats { + u64 crcerrs; + u64 illerrc; + u64 errbc; + u64 mspdc; + u64 mpctotal; + u64 mpc[8]; + u64 mlfc; + u64 mrfc; + u64 rlec; + u64 lxontxc; + u64 lxonrxc; + u64 lxofftxc; + u64 lxoffrxc; + u64 pxontxc[8]; + u64 pxonrxc[8]; + u64 pxofftxc[8]; + u64 pxoffrxc[8]; + u64 prc64; + u64 prc127; + u64 prc255; + u64 prc511; + u64 prc1023; + u64 prc1522; + u64 gprc; + u64 bprc; + u64 mprc; + u64 gptc; + u64 gorc; + u64 gotc; + u64 rnbc[8]; + u64 ruc; + u64 rfc; + u64 roc; + u64 rjc; + u64 mngprc; + u64 mngpdc; + u64 mngptc; + u64 tor; + u64 tpr; + u64 tpt; + u64 ptc64; + u64 ptc127; + u64 ptc255; + u64 ptc511; + u64 ptc1023; + u64 ptc1522; + u64 mptc; + u64 bptc; + u64 xec; + u64 qprc[16]; + u64 qptc[16]; + u64 qbrc[16]; + u64 qbtc[16]; + u64 qprdc[16]; + u64 pxon2offc[8]; + u64 fdirustat_add; + u64 fdirustat_remove; + u64 fdirfstat_fadd; + u64 fdirfstat_fremove; + u64 fdirmatch; + u64 fdirmiss; + u64 fccrc; + u64 fclast; + u64 fcoerpdc; + u64 fcoeprc; + u64 fcoeptc; + u64 fcoedwrc; + u64 fcoedwtc; + u64 fcoe_noddp; + u64 fcoe_noddp_ext_buff; + u64 ldpcec; + u64 pcrc8ec; + u64 b2ospc; + u64 b2ogprc; + u64 o2bgptc; + u64 o2bspc; +}; + +/* forward declaration */ +struct ixgbe_hw; + +/* iterator type for walking multicast address lists */ +typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr, + u32 *vmdq); + +/* Function pointer table */ +struct ixgbe_eeprom_operations { + s32 (*init_params)(struct ixgbe_hw *); + s32 (*read)(struct ixgbe_hw *, u16, u16 *); + s32 (*read_buffer)(struct ixgbe_hw *, u16, u16, u16 *); + s32 (*write)(struct ixgbe_hw *, u16, u16); + s32 (*write_buffer)(struct ixgbe_hw *, u16, u16, u16 *); + s32 (*validate_checksum)(struct ixgbe_hw *, u16 *); + s32 (*update_checksum)(struct ixgbe_hw *); + u16 (*calc_checksum)(struct ixgbe_hw *); +}; + +struct ixgbe_mac_operations { + s32 (*init_hw)(struct ixgbe_hw *); + s32 (*reset_hw)(struct ixgbe_hw *); + s32 (*start_hw)(struct ixgbe_hw *); + s32 (*clear_hw_cntrs)(struct ixgbe_hw *); + enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *); + u32 (*get_supported_physical_layer)(struct ixgbe_hw *); + s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *); + s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *); + s32 (*set_san_mac_addr)(struct ixgbe_hw *, u8 *); + s32 (*get_device_caps)(struct ixgbe_hw *, u16 *); + s32 (*get_wwn_prefix)(struct ixgbe_hw *, u16 *, u16 *); + s32 (*get_fcoe_boot_status)(struct ixgbe_hw *, u16 *); + s32 (*stop_adapter)(struct ixgbe_hw *); + s32 (*get_bus_info)(struct ixgbe_hw *); + void (*set_lan_id)(struct ixgbe_hw *); + s32 (*read_analog_reg8)(struct ixgbe_hw*, u32, u8*); + s32 (*write_analog_reg8)(struct ixgbe_hw*, u32, u8); + s32 (*setup_sfp)(struct ixgbe_hw *); + s32 (*enable_rx_dma)(struct ixgbe_hw *, u32); + s32 (*disable_sec_rx_path)(struct ixgbe_hw *); + s32 (*enable_sec_rx_path)(struct ixgbe_hw *); + s32 (*acquire_swfw_sync)(struct ixgbe_hw *, u16); + void (*release_swfw_sync)(struct ixgbe_hw *, u16); + + /* Link */ + void (*disable_tx_laser)(struct ixgbe_hw *); + void (*enable_tx_laser)(struct ixgbe_hw *); + void (*flap_tx_laser)(struct ixgbe_hw *); + s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool); + s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool); + s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *, + bool *); + + /* Packet Buffer manipulation */ + void (*setup_rxpba)(struct ixgbe_hw *, int, u32, int); + + /* LED */ + s32 (*led_on)(struct ixgbe_hw *, u32); + s32 (*led_off)(struct ixgbe_hw *, u32); + s32 (*blink_led_start)(struct ixgbe_hw *, u32); + s32 (*blink_led_stop)(struct ixgbe_hw *, u32); + + /* RAR, Multicast, VLAN */ + s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32); + s32 (*set_uc_addr)(struct ixgbe_hw *, u32, u8 *); + s32 (*clear_rar)(struct ixgbe_hw *, u32); + s32 (*insert_mac_addr)(struct ixgbe_hw *, u8 *, u32); + s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32); + s32 (*set_vmdq_san_mac)(struct ixgbe_hw *, u32); + s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32); + s32 (*init_rx_addrs)(struct ixgbe_hw *); + s32 (*update_uc_addr_list)(struct ixgbe_hw *, u8 *, u32, + ixgbe_mc_addr_itr); + s32 (*update_mc_addr_list)(struct ixgbe_hw *, u8 *, u32, + ixgbe_mc_addr_itr, bool clear); + s32 (*enable_mc)(struct ixgbe_hw *); + s32 (*disable_mc)(struct ixgbe_hw *); + s32 (*clear_vfta)(struct ixgbe_hw *); + s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool); + s32 (*set_vlvf)(struct ixgbe_hw *, u32, u32, bool, bool *); + s32 (*init_uta_tables)(struct ixgbe_hw *); + void (*set_mac_anti_spoofing)(struct ixgbe_hw *, bool, int); + void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int); + + /* Flow Control */ + s32 (*fc_enable)(struct ixgbe_hw *); + + /* Manageability interface */ + s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8); + s32 (*get_thermal_sensor_data)(struct ixgbe_hw *); + s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw); +}; + +struct ixgbe_phy_operations { + s32 (*identify)(struct ixgbe_hw *); + s32 (*identify_sfp)(struct ixgbe_hw *); + s32 (*init)(struct ixgbe_hw *); + s32 (*reset)(struct ixgbe_hw *); + s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *); + s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16); + s32 (*setup_link)(struct ixgbe_hw *); + s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool, + bool); + s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); + s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *); + s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *); + s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8); + s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *); + s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8); + void (*i2c_bus_clear)(struct ixgbe_hw *); + s32 (*check_overtemp)(struct ixgbe_hw *); +}; + +struct ixgbe_eeprom_info { + struct ixgbe_eeprom_operations ops; + enum ixgbe_eeprom_type type; + u32 semaphore_delay; + u16 word_size; + u16 address_bits; + u16 word_page_size; +}; + +#define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED 0x01 +struct ixgbe_mac_info { + struct ixgbe_mac_operations ops; + enum ixgbe_mac_type type; + u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; + u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; + u8 san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; + /* prefix for World Wide Node Name (WWNN) */ + u16 wwnn_prefix; + /* prefix for World Wide Port Name (WWPN) */ + u16 wwpn_prefix; +#define IXGBE_MAX_MTA 128 + u32 mta_shadow[IXGBE_MAX_MTA]; + s32 mc_filter_type; + u32 mcft_size; + u32 vft_size; + u32 num_rar_entries; + u32 rar_highwater; + u32 rx_pb_size; + u32 max_tx_queues; + u32 max_rx_queues; + u32 orig_autoc; + u8 san_mac_rar_index; + u32 orig_autoc2; + u16 max_msix_vectors; + bool arc_subsystem_valid; + bool orig_link_settings_stored; + bool autotry_restart; + u8 flags; + struct ixgbe_thermal_sensor_data thermal_sensor_data; +}; + +struct ixgbe_phy_info { + struct ixgbe_phy_operations ops; + enum ixgbe_phy_type type; + u32 addr; + u32 id; + enum ixgbe_sfp_type sfp_type; + bool sfp_setup_needed; + u32 revision; + enum ixgbe_media_type media_type; + bool reset_disable; + ixgbe_autoneg_advertised autoneg_advertised; + enum ixgbe_smart_speed smart_speed; + bool smart_speed_active; + bool multispeed_fiber; + bool reset_if_overtemp; + bool qsfp_shared_i2c_bus; +}; + +#include "ixgbe_mbx.h" + +struct ixgbe_mbx_operations { + void (*init_params)(struct ixgbe_hw *hw); + s32 (*read)(struct ixgbe_hw *, u32 *, u16, u16); + s32 (*write)(struct ixgbe_hw *, u32 *, u16, u16); + s32 (*read_posted)(struct ixgbe_hw *, u32 *, u16, u16); + s32 (*write_posted)(struct ixgbe_hw *, u32 *, u16, u16); + s32 (*check_for_msg)(struct ixgbe_hw *, u16); + s32 (*check_for_ack)(struct ixgbe_hw *, u16); + s32 (*check_for_rst)(struct ixgbe_hw *, u16); +}; + +struct ixgbe_mbx_stats { + u32 msgs_tx; + u32 msgs_rx; + + u32 acks; + u32 reqs; + u32 rsts; +}; + +struct ixgbe_mbx_info { + struct ixgbe_mbx_operations ops; + struct ixgbe_mbx_stats stats; + u32 timeout; + u32 udelay; + u32 v2p_mailbox; + u16 size; +}; + +struct ixgbe_hw { + u8 __iomem *hw_addr; + void *back; + struct ixgbe_mac_info mac; + struct ixgbe_addr_filter_info addr_ctrl; + struct ixgbe_fc_info fc; + struct ixgbe_phy_info phy; + struct ixgbe_eeprom_info eeprom; + struct ixgbe_bus_info bus; + struct ixgbe_mbx_info mbx; + u16 device_id; + u16 vendor_id; + u16 subsystem_device_id; + u16 subsystem_vendor_id; + u8 revision_id; + bool adapter_stopped; + bool force_full_reset; + bool allow_unsupported_sfp; +}; + +#define ixgbe_call_func(hw, func, params, error) \ + (func != NULL) ? func params : error + + +/* Error Codes */ +#define IXGBE_ERR_EEPROM -1 +#define IXGBE_ERR_EEPROM_CHECKSUM -2 +#define IXGBE_ERR_PHY -3 +#define IXGBE_ERR_CONFIG -4 +#define IXGBE_ERR_PARAM -5 +#define IXGBE_ERR_MAC_TYPE -6 +#define IXGBE_ERR_UNKNOWN_PHY -7 +#define IXGBE_ERR_LINK_SETUP -8 +#define IXGBE_ERR_ADAPTER_STOPPED -9 +#define IXGBE_ERR_INVALID_MAC_ADDR -10 +#define IXGBE_ERR_DEVICE_NOT_SUPPORTED -11 +#define IXGBE_ERR_MASTER_REQUESTS_PENDING -12 +#define IXGBE_ERR_INVALID_LINK_SETTINGS -13 +#define IXGBE_ERR_AUTONEG_NOT_COMPLETE -14 +#define IXGBE_ERR_RESET_FAILED -15 +#define IXGBE_ERR_SWFW_SYNC -16 +#define IXGBE_ERR_PHY_ADDR_INVALID -17 +#define IXGBE_ERR_I2C -18 +#define IXGBE_ERR_SFP_NOT_SUPPORTED -19 +#define IXGBE_ERR_SFP_NOT_PRESENT -20 +#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21 +#define IXGBE_ERR_NO_SAN_ADDR_PTR -22 +#define IXGBE_ERR_FDIR_REINIT_FAILED -23 +#define IXGBE_ERR_EEPROM_VERSION -24 +#define IXGBE_ERR_NO_SPACE -25 +#define IXGBE_ERR_OVERTEMP -26 +#define IXGBE_ERR_FC_NOT_NEGOTIATED -27 +#define IXGBE_ERR_FC_NOT_SUPPORTED -28 +#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE -30 +#define IXGBE_ERR_PBA_SECTION -31 +#define IXGBE_ERR_INVALID_ARGUMENT -32 +#define IXGBE_ERR_HOST_INTERFACE_COMMAND -33 +#define IXGBE_ERR_OUT_OF_MEM -34 + +#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF + +#define UNREFERENCED_XPARAMETER + +#endif /* _IXGBE_TYPE_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.c new file mode 100644 index 00000000..07b219a1 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.c @@ -0,0 +1,922 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe_x540.h" +#include "ixgbe_type.h" +#include "ixgbe_api.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw); +static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw); +static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw); +static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw); + +/** + * ixgbe_init_ops_X540 - Inits func ptrs and MAC type + * @hw: pointer to hardware structure + * + * Initialize the function pointers and assign the MAC type for X540. + * Does not touch the hardware. + **/ +s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + s32 ret_val; + + ret_val = ixgbe_init_phy_ops_generic(hw); + ret_val = ixgbe_init_ops_generic(hw); + + + /* EEPROM */ + eeprom->ops.init_params = &ixgbe_init_eeprom_params_X540; + eeprom->ops.read = &ixgbe_read_eerd_X540; + eeprom->ops.read_buffer = &ixgbe_read_eerd_buffer_X540; + eeprom->ops.write = &ixgbe_write_eewr_X540; + eeprom->ops.write_buffer = &ixgbe_write_eewr_buffer_X540; + eeprom->ops.update_checksum = &ixgbe_update_eeprom_checksum_X540; + eeprom->ops.validate_checksum = &ixgbe_validate_eeprom_checksum_X540; + eeprom->ops.calc_checksum = &ixgbe_calc_eeprom_checksum_X540; + + /* PHY */ + phy->ops.init = &ixgbe_init_phy_ops_generic; + phy->ops.reset = NULL; + + /* MAC */ + mac->ops.reset_hw = &ixgbe_reset_hw_X540; + mac->ops.get_media_type = &ixgbe_get_media_type_X540; + mac->ops.get_supported_physical_layer = + &ixgbe_get_supported_physical_layer_X540; + mac->ops.read_analog_reg8 = NULL; + mac->ops.write_analog_reg8 = NULL; + mac->ops.start_hw = &ixgbe_start_hw_X540; + mac->ops.get_san_mac_addr = &ixgbe_get_san_mac_addr_generic; + mac->ops.set_san_mac_addr = &ixgbe_set_san_mac_addr_generic; + mac->ops.get_device_caps = &ixgbe_get_device_caps_generic; + mac->ops.get_wwn_prefix = &ixgbe_get_wwn_prefix_generic; + mac->ops.get_fcoe_boot_status = &ixgbe_get_fcoe_boot_status_generic; + mac->ops.acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540; + mac->ops.release_swfw_sync = &ixgbe_release_swfw_sync_X540; + mac->ops.disable_sec_rx_path = &ixgbe_disable_sec_rx_path_generic; + mac->ops.enable_sec_rx_path = &ixgbe_enable_sec_rx_path_generic; + + /* RAR, Multicast, VLAN */ + mac->ops.set_vmdq = &ixgbe_set_vmdq_generic; + mac->ops.set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic; + mac->ops.clear_vmdq = &ixgbe_clear_vmdq_generic; + mac->ops.insert_mac_addr = &ixgbe_insert_mac_addr_generic; + mac->rar_highwater = 1; + mac->ops.set_vfta = &ixgbe_set_vfta_generic; + mac->ops.set_vlvf = &ixgbe_set_vlvf_generic; + mac->ops.clear_vfta = &ixgbe_clear_vfta_generic; + mac->ops.init_uta_tables = &ixgbe_init_uta_tables_generic; + mac->ops.set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing; + mac->ops.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing; + + /* Link */ + mac->ops.get_link_capabilities = + &ixgbe_get_copper_link_capabilities_generic; + mac->ops.setup_link = &ixgbe_setup_mac_link_X540; + mac->ops.setup_rxpba = &ixgbe_set_rxpba_generic; + mac->ops.check_link = &ixgbe_check_mac_link_generic; + + mac->mcft_size = 128; + mac->vft_size = 128; + mac->num_rar_entries = 128; + mac->rx_pb_size = 384; + mac->max_tx_queues = 128; + mac->max_rx_queues = 128; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); + + /* + * FWSM register + * ARC supported; valid only if manageability features are + * enabled. + */ + mac->arc_subsystem_valid = (IXGBE_READ_REG(hw, IXGBE_FWSM) & + IXGBE_FWSM_MODE_MASK) ? true : false; + + //hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf; + + /* LEDs */ + mac->ops.blink_led_start = ixgbe_blink_led_start_X540; + mac->ops.blink_led_stop = ixgbe_blink_led_stop_X540; + + /* Manageability interface */ + mac->ops.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic; + + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_X540 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: true when autoneg or autotry is enabled + * + * Determines the link capabilities by reading the AUTOC register. + **/ +s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + ixgbe_get_copper_link_capabilities_generic(hw, speed, autoneg); + + return 0; +} + +/** + * ixgbe_get_media_type_X540 - Get media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw) +{ + return ixgbe_media_type_copper; +} + +/** + * ixgbe_setup_mac_link_X540 - Sets the auto advertised capabilities + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + **/ +s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + return hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); +} + +/** + * ixgbe_reset_hw_X540 - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, and perform a reset. + **/ +s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) +{ + s32 status = 0; + + /* + * Userland DPDK takes the ownershiop of device + * Kernel driver here used as the simple path for ethtool only + * Won't real reset device anyway + */ +#if 0 + u32 ctrl, i; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + status = hw->mac.ops.stop_adapter(hw); + if (status != 0) + goto reset_hw_out; + + /* flush pending Tx transactions */ + ixgbe_clear_tx_pending(hw); + +mac_reset_top: + ctrl = IXGBE_CTRL_RST; + ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST_MASK)) + break; + } + + if (ctrl & IXGBE_CTRL_RST_MASK) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + msleep(100); + + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + /* Set the Rx packet buffer size. */ + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT); + +#endif + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = 128; + hw->mac.ops.init_rx_addrs(hw); + + /* Store the permanent SAN mac address */ + hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); + + /* Add the SAN MAC address to the RAR only if it's a valid address */ + if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { + hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, + hw->mac.san_addr, 0, IXGBE_RAH_AV); + + /* Save the SAN MAC RAR index */ + hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1; + + /* Reserve the last RAR for the SAN MAC address */ + hw->mac.num_rar_entries--; + } + + /* Store the alternative WWNN/WWPN prefix */ + hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, + &hw->mac.wwpn_prefix); + +//reset_hw_out: + return status; +} + +/** + * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function + * and the generation start_hw function. + * Then performs revision-specific operations, if any. + **/ +s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + + ret_val = ixgbe_start_hw_generic(hw); + if (ret_val != 0) + goto out; + + ret_val = ixgbe_start_hw_gen2(hw); + +out: + return ret_val; +} + +/** + * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u16 ext_ability = 0; + + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); + if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + + return physical_layer; +} + +/** + * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params + * @hw: pointer to hardware structure + * + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. + **/ +s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + u32 eec; + u16 eeprom_size; + + if (eeprom->type == ixgbe_eeprom_uninitialized) { + eeprom->semaphore_delay = 10; + eeprom->type = ixgbe_flash; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> + IXGBE_EEC_SIZE_SHIFT); + eeprom->word_size = 1 << (eeprom_size + + IXGBE_EEPROM_WORD_SIZE_SHIFT); + + hw_dbg(hw, "Eeprom params: type = %d, size = %d\n", + eeprom->type, eeprom->word_size); + } + + return 0; +} + +/** + * ixgbe_read_eerd_X540- Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) + status = ixgbe_read_eerd_generic(hw, offset, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_read_eerd_buffer_X540- Read EEPROM word(s) using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM + * + * Reads a 16 bit word(s) from the EEPROM using the EERD register. + **/ +s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) + status = ixgbe_read_eerd_buffer_generic(hw, offset, + words, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the EEWR register. + **/ +s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) + status = ixgbe_write_eewr_generic(hw, offset, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of words + * @data: word(s) write to the EEPROM + * + * Write a 16 bit word(s) to the EEPROM using the EEWR register. + **/ +s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) + status = ixgbe_write_eewr_buffer_generic(hw, offset, + words, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum + * + * This function does not use synchronization for EERD and EEWR. It can + * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540. + * + * @hw: pointer to hardware structure + **/ +u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw) +{ + u16 i; + u16 j; + u16 checksum = 0; + u16 length = 0; + u16 pointer = 0; + u16 word = 0; + + /* + * Do not use hw->eeprom.ops.read because we do not want to take + * the synchronization semaphores here. Instead use + * ixgbe_read_eerd_generic + */ + + /* Include 0x0-0x3F in the checksum */ + for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { + if (ixgbe_read_eerd_generic(hw, i, &word) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + checksum += word; + } + + /* + * Include all data from pointers 0x3, 0x6-0xE. This excludes the + * FW, PHY module, and PCIe Expansion/Option ROM pointers. + */ + for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { + if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR) + continue; + + if (ixgbe_read_eerd_generic(hw, i, &pointer) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + + /* Skip pointer section if the pointer is invalid. */ + if (pointer == 0xFFFF || pointer == 0 || + pointer >= hw->eeprom.word_size) + continue; + + if (ixgbe_read_eerd_generic(hw, pointer, &length) != + 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + + /* Skip pointer section if length is invalid. */ + if (length == 0xFFFF || length == 0 || + (pointer + length) >= hw->eeprom.word_size) + continue; + + for (j = pointer+1; j <= pointer+length; j++) { + if (ixgbe_read_eerd_generic(hw, j, &word) != + 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + checksum += word; + } + } + + checksum = (u16)IXGBE_EEPROM_SUM - checksum; + + return checksum; +} + +/** + * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum + * + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. + **/ +s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw, + u16 *checksum_val) +{ + s32 status; + u16 checksum; + u16 read_checksum = 0; + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + + if (status != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + goto out; + } + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) { + checksum = hw->eeprom.ops.calc_checksum(hw); + + /* + * Do not use hw->eeprom.ops.read because we do not want to take + * the synchronization semaphores twice here. + */ + ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM, + &read_checksum); + + /* + * Verify read checksum from EEPROM is the same as + * calculated checksum + */ + if (read_checksum != checksum) + status = IXGBE_ERR_EEPROM_CHECKSUM; + + /* If the user cares, return the calculated checksum */ + if (checksum_val) + *checksum_val = checksum; + } else { + status = IXGBE_ERR_SWFW_SYNC; + } + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); +out: + return status; +} + +/** + * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash + * @hw: pointer to hardware structure + * + * After writing EEPROM to shadow RAM using EEWR register, software calculates + * checksum and updates the EEPROM and instructs the hardware to update + * the flash. + **/ +s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw) +{ + s32 status; + u16 checksum; + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + + if (status != 0) + hw_dbg(hw, "EEPROM read failed\n"); + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) { + checksum = hw->eeprom.ops.calc_checksum(hw); + + /* + * Do not use hw->eeprom.ops.write because we do not want to + * take the synchronization semaphores twice here. + */ + status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM, + checksum); + + if (status == 0) + status = ixgbe_update_flash_X540(hw); + else + status = IXGBE_ERR_SWFW_SYNC; + } + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + + return status; +} + +/** + * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device + * @hw: pointer to hardware structure + * + * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy + * EEPROM from shadow RAM to the flash device. + **/ +static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw) +{ + u32 flup; + s32 status = IXGBE_ERR_EEPROM; + + status = ixgbe_poll_flash_update_done_X540(hw); + if (status == IXGBE_ERR_EEPROM) { + hw_dbg(hw, "Flash update time out\n"); + goto out; + } + + flup = IXGBE_READ_REG(hw, IXGBE_EEC) | IXGBE_EEC_FLUP; + IXGBE_WRITE_REG(hw, IXGBE_EEC, flup); + + status = ixgbe_poll_flash_update_done_X540(hw); + if (status == 0) + hw_dbg(hw, "Flash update complete\n"); + else + hw_dbg(hw, "Flash update time out\n"); + + if (hw->revision_id == 0) { + flup = IXGBE_READ_REG(hw, IXGBE_EEC); + + if (flup & IXGBE_EEC_SEC1VAL) { + flup |= IXGBE_EEC_FLUP; + IXGBE_WRITE_REG(hw, IXGBE_EEC, flup); + } + + status = ixgbe_poll_flash_update_done_X540(hw); + if (status == 0) + hw_dbg(hw, "Flash update complete\n"); + else + hw_dbg(hw, "Flash update time out\n"); + } +out: + return status; +} + +/** + * ixgbe_poll_flash_update_done_X540 - Poll flash update status + * @hw: pointer to hardware structure + * + * Polls the FLUDONE (bit 26) of the EEC Register to determine when the + * flash update is done. + **/ +static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) +{ + u32 i; + u32 reg; + s32 status = IXGBE_ERR_EEPROM; + + for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) { + reg = IXGBE_READ_REG(hw, IXGBE_EEC); + if (reg & IXGBE_EEC_FLUDONE) { + status = 0; + break; + } + udelay(5); + } + return status; +} + +/** + * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore thought the SW_FW_SYNC register for + * the specified function (CSR, PHY0, PHY1, NVM, Flash) + **/ +s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + u32 fwmask = mask << 5; + u32 hwmask = 0; + u32 timeout = 200; + u32 i; + s32 ret_val = 0; + + if (swmask == IXGBE_GSSR_EEP_SM) + hwmask = IXGBE_GSSR_FLASH_SM; + + /* SW only mask doesn't have FW bit pair */ + if (swmask == IXGBE_GSSR_SW_MNG_SM) + fwmask = 0; + + for (i = 0; i < timeout; i++) { + /* + * SW NVM semaphore bit is used for access to all + * SW_FW_SYNC bits (not just NVM) + */ + if (ixgbe_get_swfw_sync_semaphore(hw)) { + ret_val = IXGBE_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + if (!(swfw_sync & (fwmask | swmask | hwmask))) { + swfw_sync |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + ixgbe_release_swfw_sync_semaphore(hw); + msleep(5); + goto out; + } else { + /* + * Firmware currently using resource (fwmask), hardware + * currently using resource (hwmask), or other software + * thread currently using resource (swmask) + */ + ixgbe_release_swfw_sync_semaphore(hw); + msleep(5); + } + } + + /* Failed to get SW only semaphore */ + if (swmask == IXGBE_GSSR_SW_MNG_SM) { + ret_val = IXGBE_ERR_SWFW_SYNC; + goto out; + } + + /* If the resource is not released by the FW/HW the SW can assume that + * the FW/HW malfunctions. In that case the SW should sets the SW bit(s) + * of the requested resource(s) while ignoring the corresponding FW/HW + * bits in the SW_FW_SYNC register. + */ + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + if (swfw_sync & (fwmask | hwmask)) { + if (ixgbe_get_swfw_sync_semaphore(hw)) { + ret_val = IXGBE_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + ixgbe_release_swfw_sync_semaphore(hw); + msleep(5); + } + +out: + return ret_val; +} + +/** + * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore through the SW_FW_SYNC register + * for the specified function (CSR, PHY0, PHY1, EVM, Flash) + **/ +void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + + ixgbe_get_swfw_sync_semaphore(hw); + + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + swfw_sync &= ~swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + + ixgbe_release_swfw_sync_semaphore(hw); + msleep(5); +} + +/** + * ixgbe_get_nvm_semaphore - Get hardware semaphore + * @hw: pointer to hardware structure + * + * Sets the hardware semaphores so SW/FW can gain control of shared resources + **/ +static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_EEPROM; + u32 timeout = 2000; + u32 i; + u32 swsm; + + /* Get SMBI software semaphore between device drivers first */ + for (i = 0; i < timeout; i++) { + /* + * If the SMBI bit is 0 when we read it, then the bit will be + * set and we have the semaphore + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (!(swsm & IXGBE_SWSM_SMBI)) { + status = 0; + break; + } + udelay(50); + } + + /* Now get the semaphore between SW/FW through the REGSMP bit */ + if (status == 0) { + for (i = 0; i < timeout; i++) { + swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + if (!(swsm & IXGBE_SWFW_REGSMP)) + break; + + udelay(50); + } + + /* + * Release semaphores and return error if SW NVM semaphore + * was not granted because we don't have access to the EEPROM + */ + if (i >= timeout) { + hw_dbg(hw, "REGSMP Software NVM semaphore not " + "granted.\n"); + ixgbe_release_swfw_sync_semaphore(hw); + status = IXGBE_ERR_EEPROM; + } + } else { + hw_dbg(hw, "Software semaphore SMBI between device drivers " + "not granted.\n"); + } + + return status; +} + +/** + * ixgbe_release_nvm_semaphore - Release hardware semaphore + * @hw: pointer to hardware structure + * + * This function clears hardware semaphore bits. + **/ +static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw) +{ + u32 swsm; + + /* Release both semaphores by writing 0 to the bits REGSMP and SMBI */ + + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + swsm &= ~IXGBE_SWSM_SMBI; + IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); + + swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + swsm &= ~IXGBE_SWFW_REGSMP; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swsm); + + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_blink_led_start_X540 - Blink LED based on index. + * @hw: pointer to hardware structure + * @index: led number to blink + * + * Devices that implement the version 2 interface: + * X540 + **/ +s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index) +{ + u32 macc_reg; + u32 ledctl_reg; + ixgbe_link_speed speed; + bool link_up; + + /* + * Link should be up in order for the blink bit in the LED control + * register to work. Force link and speed in the MAC if link is down. + * This will be reversed when we stop the blinking. + */ + hw->mac.ops.check_link(hw, &speed, &link_up, false); + if (link_up == false) { + macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC); + macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS; + IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg); + } + /* Set the LED to LINK_UP + BLINK. */ + ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + ledctl_reg &= ~IXGBE_LED_MODE_MASK(index); + ledctl_reg |= IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index. + * @hw: pointer to hardware structure + * @index: led number to stop blinking + * + * Devices that implement the version 2 interface: + * X540 + **/ +s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index) +{ + u32 macc_reg; + u32 ledctl_reg; + + /* Restore the LED to its default value. */ + ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + ledctl_reg &= ~IXGBE_LED_MODE_MASK(index); + ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); + ledctl_reg &= ~IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg); + + /* Unforce link and speed in the MAC. */ + macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC); + macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS); + IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.h b/kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.h new file mode 100644 index 00000000..96020911 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_x540.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_X540_H_ +#define _IXGBE_X540_H_ + +#include "ixgbe_type.h" + +s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, bool *autoneg); +enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw); +s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg, bool link_up_wait_to_complete); +s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw); +s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw); +u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw); + +s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw); +s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data); +s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, u16 offset, u16 words, + u16 *data); +s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data); +s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, u16 offset, u16 words, + u16 *data); +s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw); +s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw, u16 *checksum_val); +u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw); + +s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask); +void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask); + +s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index); +#endif /* _IXGBE_X540_H_ */ diff --git a/kernel/linux/kni/ethtool/ixgbe/kcompat.c b/kernel/linux/kni/ethtool/ixgbe/kcompat.c new file mode 100644 index 00000000..6c994576 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/kcompat.c @@ -0,0 +1,1231 @@ +// SPDX-License-Identifier: GPL-2.0 +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe.h" +#include "kcompat.h" + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) ) +/* From lib/vsprintf.c */ +#include <asm/div64.h> + +static int skip_atoi(const char **s) +{ + int i=0; + + while (isdigit(**s)) + i = i*10 + *((*s)++) - '0'; + return i; +} + +#define _kc_ZEROPAD 1 /* pad with zero */ +#define _kc_SIGN 2 /* unsigned/signed long */ +#define _kc_PLUS 4 /* show plus */ +#define _kc_SPACE 8 /* space if plus */ +#define _kc_LEFT 16 /* left justified */ +#define _kc_SPECIAL 32 /* 0x */ +#define _kc_LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ + +static char * number(char * buf, char * end, long long num, int base, int size, int precision, int type) +{ + char c,sign,tmp[66]; + const char *digits; + const char small_digits[] = "0123456789abcdefghijklmnopqrstuvwxyz"; + const char large_digits[] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"; + int i; + + digits = (type & _kc_LARGE) ? large_digits : small_digits; + if (type & _kc_LEFT) + type &= ~_kc_ZEROPAD; + if (base < 2 || base > 36) + return 0; + c = (type & _kc_ZEROPAD) ? '0' : ' '; + sign = 0; + if (type & _kc_SIGN) { + if (num < 0) { + sign = '-'; + num = -num; + size--; + } else if (type & _kc_PLUS) { + sign = '+'; + size--; + } else if (type & _kc_SPACE) { + sign = ' '; + size--; + } + } + if (type & _kc_SPECIAL) { + if (base == 16) + size -= 2; + else if (base == 8) + size--; + } + i = 0; + if (num == 0) + tmp[i++]='0'; + else while (num != 0) + tmp[i++] = digits[do_div(num,base)]; + if (i > precision) + precision = i; + size -= precision; + if (!(type&(_kc_ZEROPAD+_kc_LEFT))) { + while(size-->0) { + if (buf <= end) + *buf = ' '; + ++buf; + } + } + if (sign) { + if (buf <= end) + *buf = sign; + ++buf; + } + if (type & _kc_SPECIAL) { + if (base==8) { + if (buf <= end) + *buf = '0'; + ++buf; + } else if (base==16) { + if (buf <= end) + *buf = '0'; + ++buf; + if (buf <= end) + *buf = digits[33]; + ++buf; + } + } + if (!(type & _kc_LEFT)) { + while (size-- > 0) { + if (buf <= end) + *buf = c; + ++buf; + } + } + while (i < precision--) { + if (buf <= end) + *buf = '0'; + ++buf; + } + while (i-- > 0) { + if (buf <= end) + *buf = tmp[i]; + ++buf; + } + while (size-- > 0) { + if (buf <= end) + *buf = ' '; + ++buf; + } + return buf; +} + +int _kc_vsnprintf(char *buf, size_t size, const char *fmt, va_list args) +{ + int len; + unsigned long long num; + int i, base; + char *str, *end, c; + const char *s; + + int flags; /* flags to number() */ + + int field_width; /* width of output field */ + int precision; /* min. # of digits for integers; max + number of chars for from string */ + int qualifier; /* 'h', 'l', or 'L' for integer fields */ + /* 'z' support added 23/7/1999 S.H. */ + /* 'z' changed to 'Z' --davidm 1/25/99 */ + + str = buf; + end = buf + size - 1; + + if (end < buf - 1) { + end = ((void *) -1); + size = end - buf + 1; + } + + for (; *fmt ; ++fmt) { + if (*fmt != '%') { + if (str <= end) + *str = *fmt; + ++str; + continue; + } + + /* process flags */ + flags = 0; + repeat: + ++fmt; /* this also skips first '%' */ + switch (*fmt) { + case '-': flags |= _kc_LEFT; goto repeat; + case '+': flags |= _kc_PLUS; goto repeat; + case ' ': flags |= _kc_SPACE; goto repeat; + case '#': flags |= _kc_SPECIAL; goto repeat; + case '0': flags |= _kc_ZEROPAD; goto repeat; + } + + /* get field width */ + field_width = -1; + if (isdigit(*fmt)) + field_width = skip_atoi(&fmt); + else if (*fmt == '*') { + ++fmt; + /* it's the next argument */ + field_width = va_arg(args, int); + if (field_width < 0) { + field_width = -field_width; + flags |= _kc_LEFT; + } + } + + /* get the precision */ + precision = -1; + if (*fmt == '.') { + ++fmt; + if (isdigit(*fmt)) + precision = skip_atoi(&fmt); + else if (*fmt == '*') { + ++fmt; + /* it's the next argument */ + precision = va_arg(args, int); + } + if (precision < 0) + precision = 0; + } + + /* get the conversion qualifier */ + qualifier = -1; + if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' || *fmt =='Z') { + qualifier = *fmt; + ++fmt; + } + + /* default base */ + base = 10; + + switch (*fmt) { + case 'c': + if (!(flags & _kc_LEFT)) { + while (--field_width > 0) { + if (str <= end) + *str = ' '; + ++str; + } + } + c = (unsigned char) va_arg(args, int); + if (str <= end) + *str = c; + ++str; + while (--field_width > 0) { + if (str <= end) + *str = ' '; + ++str; + } + continue; + + case 's': + s = va_arg(args, char *); + if (!s) + s = "<NULL>"; + + len = strnlen(s, precision); + + if (!(flags & _kc_LEFT)) { + while (len < field_width--) { + if (str <= end) + *str = ' '; + ++str; + } + } + for (i = 0; i < len; ++i) { + if (str <= end) + *str = *s; + ++str; ++s; + } + while (len < field_width--) { + if (str <= end) + *str = ' '; + ++str; + } + continue; + + case 'p': + if (field_width == -1) { + field_width = 2*sizeof(void *); + flags |= _kc_ZEROPAD; + } + str = number(str, end, + (unsigned long) va_arg(args, void *), + 16, field_width, precision, flags); + continue; + + + case 'n': + /* FIXME: + * What does C99 say about the overflow case here? */ + if (qualifier == 'l') { + long * ip = va_arg(args, long *); + *ip = (str - buf); + } else if (qualifier == 'Z') { + size_t * ip = va_arg(args, size_t *); + *ip = (str - buf); + } else { + int * ip = va_arg(args, int *); + *ip = (str - buf); + } + continue; + + case '%': + if (str <= end) + *str = '%'; + ++str; + continue; + + /* integer number formats - set up the flags and "break" */ + case 'o': + base = 8; + break; + + case 'X': + flags |= _kc_LARGE; + case 'x': + base = 16; + break; + + case 'd': + case 'i': + flags |= _kc_SIGN; + case 'u': + break; + + default: + if (str <= end) + *str = '%'; + ++str; + if (*fmt) { + if (str <= end) + *str = *fmt; + ++str; + } else { + --fmt; + } + continue; + } + if (qualifier == 'L') + num = va_arg(args, long long); + else if (qualifier == 'l') { + num = va_arg(args, unsigned long); + if (flags & _kc_SIGN) + num = (signed long) num; + } else if (qualifier == 'Z') { + num = va_arg(args, size_t); + } else if (qualifier == 'h') { + num = (unsigned short) va_arg(args, int); + if (flags & _kc_SIGN) + num = (signed short) num; + } else { + num = va_arg(args, unsigned int); + if (flags & _kc_SIGN) + num = (signed int) num; + } + str = number(str, end, num, base, + field_width, precision, flags); + } + if (str <= end) + *str = '\0'; + else if (size > 0) + /* don't write out a null byte if the buf size is zero */ + *end = '\0'; + /* the trailing null byte doesn't count towards the total + * ++str; + */ + return str-buf; +} + +int _kc_snprintf(char * buf, size_t size, const char *fmt, ...) +{ + va_list args; + int i; + + va_start(args, fmt); + i = _kc_vsnprintf(buf,size,fmt,args); + va_end(args); + return i; +} +#endif /* < 2.4.8 */ + + + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ) +#ifdef CONFIG_PCI_IOV +int __kc_pci_vfs_assigned(struct pci_dev *dev) +{ + unsigned int vfs_assigned = 0; +#ifdef HAVE_PCI_DEV_FLAGS_ASSIGNED + int pos; + struct pci_dev *vfdev; + unsigned short dev_id; + + /* only search if we are a PF */ + if (!dev->is_physfn) + return 0; + + /* find SR-IOV capability */ + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); + if (!pos) + return 0; + + /* + * * determine the device ID for the VFs, the vendor ID will be the + * * same as the PF so there is no need to check for that one + * */ + pci_read_config_word(dev, pos + PCI_SRIOV_VF_DID, &dev_id); + + /* loop through all the VFs to see if we own any that are assigned */ + vfdev = pci_get_device(dev->vendor, dev_id, NULL); + while (vfdev) { + /* + * * It is considered assigned if it is a virtual function with + * * our dev as the physical function and the assigned bit is set + * */ + if (vfdev->is_virtfn && (vfdev->physfn == dev) && + (vfdev->dev_flags & PCI_DEV_FLAGS_ASSIGNED)) + vfs_assigned++; + + vfdev = pci_get_device(dev->vendor, dev_id, vfdev); + } + +#endif /* HAVE_PCI_DEV_FLAGS_ASSIGNED */ + return vfs_assigned; +} + +#endif /* CONFIG_PCI_IOV */ +#endif /* 3.10.0 */ + + + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,13) ) + +/**************************************/ +/* PCI DMA MAPPING */ + +#if defined(CONFIG_HIGHMEM) + +#ifndef PCI_DRAM_OFFSET +#define PCI_DRAM_OFFSET 0 +#endif + +u64 +_kc_pci_map_page(struct pci_dev *dev, struct page *page, unsigned long offset, + size_t size, int direction) +{ + return ((u64) (page - mem_map) << PAGE_SHIFT) + offset + + PCI_DRAM_OFFSET; +} + +#else /* CONFIG_HIGHMEM */ + +u64 +_kc_pci_map_page(struct pci_dev *dev, struct page *page, unsigned long offset, + size_t size, int direction) +{ + return pci_map_single(dev, (void *)page_address(page) + offset, size, + direction); +} + +#endif /* CONFIG_HIGHMEM */ + +void +_kc_pci_unmap_page(struct pci_dev *dev, u64 dma_addr, size_t size, + int direction) +{ + return pci_unmap_single(dev, dma_addr, size, direction); +} + +#endif /* 2.4.13 => 2.4.3 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3) ) + +/**************************************/ +/* PCI DRIVER API */ + +int +_kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask) +{ + if (!pci_dma_supported(dev, mask)) + return -EIO; + dev->dma_mask = mask; + return 0; +} + +int +_kc_pci_request_regions(struct pci_dev *dev, char *res_name) +{ + int i; + + for (i = 0; i < 6; i++) { + if (pci_resource_len(dev, i) == 0) + continue; + + if (pci_resource_flags(dev, i) & IORESOURCE_IO) { + if (!request_region(pci_resource_start(dev, i), pci_resource_len(dev, i), res_name)) { + pci_release_regions(dev); + return -EBUSY; + } + } else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) { + if (!request_mem_region(pci_resource_start(dev, i), pci_resource_len(dev, i), res_name)) { + pci_release_regions(dev); + return -EBUSY; + } + } + } + return 0; +} + +void +_kc_pci_release_regions(struct pci_dev *dev) +{ + int i; + + for (i = 0; i < 6; i++) { + if (pci_resource_len(dev, i) == 0) + continue; + + if (pci_resource_flags(dev, i) & IORESOURCE_IO) + release_region(pci_resource_start(dev, i), pci_resource_len(dev, i)); + + else if (pci_resource_flags(dev, i) & IORESOURCE_MEM) + release_mem_region(pci_resource_start(dev, i), pci_resource_len(dev, i)); + } +} + +/**************************************/ +/* NETWORK DRIVER API */ + +struct net_device * +_kc_alloc_etherdev(int sizeof_priv) +{ + struct net_device *dev; + int alloc_size; + + alloc_size = sizeof(*dev) + sizeof_priv + IFNAMSIZ + 31; + dev = kzalloc(alloc_size, GFP_KERNEL); + if (!dev) + return NULL; + + if (sizeof_priv) + dev->priv = (void *) (((unsigned long)(dev + 1) + 31) & ~31); + dev->name[0] = '\0'; + ether_setup(dev); + + return dev; +} + +int +_kc_is_valid_ether_addr(u8 *addr) +{ + const char zaddr[6] = { 0, }; + + return !(addr[0] & 1) && memcmp(addr, zaddr, 6); +} + +#endif /* 2.4.3 => 2.4.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6) ) + +int +_kc_pci_set_power_state(struct pci_dev *dev, int state) +{ + return 0; +} + +int +_kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable) +{ + return 0; +} + +#endif /* 2.4.6 => 2.4.3 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) +void _kc_skb_fill_page_desc(struct sk_buff *skb, int i, struct page *page, + int off, int size) +{ + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + frag->page = page; + frag->page_offset = off; + frag->size = size; + skb_shinfo(skb)->nr_frags = i + 1; +} + +/* + * Original Copyright: + * find_next_bit.c: fallback find next bit implementation + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + */ + +/** + * find_next_bit - find the next set bit in a memory region + * @addr: The address to base the search on + * @offset: The bitnumber to start searching at + * @size: The maximum size to search + */ +unsigned long find_next_bit(const unsigned long *addr, unsigned long size, + unsigned long offset) +{ + const unsigned long *p = addr + BITOP_WORD(offset); + unsigned long result = offset & ~(BITS_PER_LONG-1); + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset %= BITS_PER_LONG; + if (offset) { + tmp = *(p++); + tmp &= (~0UL << offset); + if (size < BITS_PER_LONG) + goto found_first; + if (tmp) + goto found_middle; + size -= BITS_PER_LONG; + result += BITS_PER_LONG; + } + while (size & ~(BITS_PER_LONG-1)) { + if ((tmp = *(p++))) + goto found_middle; + result += BITS_PER_LONG; + size -= BITS_PER_LONG; + } + if (!size) + return result; + tmp = *p; + +found_first: + tmp &= (~0UL >> (BITS_PER_LONG - size)); + if (tmp == 0UL) /* Are any bits set? */ + return result + size; /* Nope. */ +found_middle: + return result + ffs(tmp); +} + +size_t _kc_strlcpy(char *dest, const char *src, size_t size) +{ + size_t ret = strlen(src); + + if (size) { + size_t len = (ret >= size) ? size - 1 : ret; + memcpy(dest, src, len); + dest[len] = '\0'; + } + return ret; +} + +#endif /* 2.6.0 => 2.4.6 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) +int _kc_scnprintf(char * buf, size_t size, const char *fmt, ...) +{ + va_list args; + int i; + + va_start(args, fmt); + i = vsnprintf(buf, size, fmt, args); + va_end(args); + return (i >= size) ? (size - 1) : i; +} +#endif /* < 2.6.4 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) +DECLARE_BITMAP(_kcompat_node_online_map, MAX_NUMNODES) = {1}; +#endif /* < 2.6.10 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) ) +char *_kc_kstrdup(const char *s, unsigned int gfp) +{ + size_t len; + char *buf; + + if (!s) + return NULL; + + len = strlen(s) + 1; + buf = kmalloc(len, gfp); + if (buf) + memcpy(buf, s, len); + return buf; +} +#endif /* < 2.6.13 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) ) +void *_kc_kzalloc(size_t size, int flags) +{ + void *ret = kmalloc(size, flags); + if (ret) + memset(ret, 0, size); + return ret; +} +#endif /* <= 2.6.13 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) ) +int _kc_skb_pad(struct sk_buff *skb, int pad) +{ + int ntail; + + /* If the skbuff is non linear tailroom is always zero.. */ + if(!skb_cloned(skb) && skb_tailroom(skb) >= pad) { + memset(skb->data+skb->len, 0, pad); + return 0; + } + + ntail = skb->data_len + pad - (skb->end - skb->tail); + if (likely(skb_cloned(skb) || ntail > 0)) { + if (pskb_expand_head(skb, 0, ntail, GFP_ATOMIC)); + goto free_skb; + } + +#ifdef MAX_SKB_FRAGS + if (skb_is_nonlinear(skb) && + !__pskb_pull_tail(skb, skb->data_len)) + goto free_skb; + +#endif + memset(skb->data + skb->len, 0, pad); + return 0; + +free_skb: + kfree_skb(skb); + return -ENOMEM; +} + +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4))) +int _kc_pci_save_state(struct pci_dev *pdev) +{ + struct adapter_struct *adapter = pci_get_drvdata(pdev); + int size = PCI_CONFIG_SPACE_LEN, i; + u16 pcie_cap_offset, pcie_link_status; + +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) + /* no ->dev for 2.4 kernels */ + WARN_ON(pdev->dev.driver_data == NULL); +#endif + pcie_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_EXP); + if (pcie_cap_offset) { + if (!pci_read_config_word(pdev, + pcie_cap_offset + PCIE_LINK_STATUS, + &pcie_link_status)) + size = PCIE_CONFIG_SPACE_LEN; + } + pci_config_space_ich8lan(); +#ifdef HAVE_PCI_ERS + if (adapter->config_space == NULL) +#else + WARN_ON(adapter->config_space != NULL); +#endif + adapter->config_space = kmalloc(size, GFP_KERNEL); + if (!adapter->config_space) { + printk(KERN_ERR "Out of memory in pci_save_state\n"); + return -ENOMEM; + } + for (i = 0; i < (size / 4); i++) + pci_read_config_dword(pdev, i * 4, &adapter->config_space[i]); + return 0; +} + +void _kc_pci_restore_state(struct pci_dev *pdev) +{ + struct adapter_struct *adapter = pci_get_drvdata(pdev); + int size = PCI_CONFIG_SPACE_LEN, i; + u16 pcie_cap_offset; + u16 pcie_link_status; + + if (adapter->config_space != NULL) { + pcie_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_EXP); + if (pcie_cap_offset && + !pci_read_config_word(pdev, + pcie_cap_offset + PCIE_LINK_STATUS, + &pcie_link_status)) + size = PCIE_CONFIG_SPACE_LEN; + + pci_config_space_ich8lan(); + for (i = 0; i < (size / 4); i++) + pci_write_config_dword(pdev, i * 4, adapter->config_space[i]); +#ifndef HAVE_PCI_ERS + kfree(adapter->config_space); + adapter->config_space = NULL; +#endif + } +} +#endif /* !(RHEL_RELEASE_CODE >= RHEL 5.4) */ + +#ifdef HAVE_PCI_ERS +void _kc_free_netdev(struct net_device *netdev) +{ + struct adapter_struct *adapter = netdev_priv(netdev); + + if (adapter->config_space != NULL) + kfree(adapter->config_space); +#ifdef CONFIG_SYSFS + if (netdev->reg_state == NETREG_UNINITIALIZED) { + kfree((char *)netdev - netdev->padded); + } else { + BUG_ON(netdev->reg_state != NETREG_UNREGISTERED); + netdev->reg_state = NETREG_RELEASED; + class_device_put(&netdev->class_dev); + } +#else + kfree((char *)netdev - netdev->padded); +#endif +} +#endif + +void *_kc_kmemdup(const void *src, size_t len, unsigned gfp) +{ + void *p; + + p = kzalloc(len, gfp); + if (p) + memcpy(p, src, len); + return p; +} +#endif /* <= 2.6.19 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ) +/* hexdump code taken from lib/hexdump.c */ +static void _kc_hex_dump_to_buffer(const void *buf, size_t len, int rowsize, + int groupsize, unsigned char *linebuf, + size_t linebuflen, bool ascii) +{ + const u8 *ptr = buf; + u8 ch; + int j, lx = 0; + int ascii_column; + + if (rowsize != 16 && rowsize != 32) + rowsize = 16; + + if (!len) + goto nil; + if (len > rowsize) /* limit to one line at a time */ + len = rowsize; + if ((len % groupsize) != 0) /* no mixed size output */ + groupsize = 1; + + switch (groupsize) { + case 8: { + const u64 *ptr8 = buf; + int ngroups = len / groupsize; + + for (j = 0; j < ngroups; j++) + lx += scnprintf((char *)(linebuf + lx), linebuflen - lx, + "%s%16.16llx", j ? " " : "", + (unsigned long long)*(ptr8 + j)); + ascii_column = 17 * ngroups + 2; + break; + } + + case 4: { + const u32 *ptr4 = buf; + int ngroups = len / groupsize; + + for (j = 0; j < ngroups; j++) + lx += scnprintf((char *)(linebuf + lx), linebuflen - lx, + "%s%8.8x", j ? " " : "", *(ptr4 + j)); + ascii_column = 9 * ngroups + 2; + break; + } + + case 2: { + const u16 *ptr2 = buf; + int ngroups = len / groupsize; + + for (j = 0; j < ngroups; j++) + lx += scnprintf((char *)(linebuf + lx), linebuflen - lx, + "%s%4.4x", j ? " " : "", *(ptr2 + j)); + ascii_column = 5 * ngroups + 2; + break; + } + + default: + for (j = 0; (j < len) && (lx + 3) <= linebuflen; j++) { + ch = ptr[j]; + linebuf[lx++] = hex_asc(ch >> 4); + linebuf[lx++] = hex_asc(ch & 0x0f); + linebuf[lx++] = ' '; + } + if (j) + lx--; + + ascii_column = 3 * rowsize + 2; + break; + } + if (!ascii) + goto nil; + + while (lx < (linebuflen - 1) && lx < (ascii_column - 1)) + linebuf[lx++] = ' '; + for (j = 0; (j < len) && (lx + 2) < linebuflen; j++) + linebuf[lx++] = (isascii(ptr[j]) && isprint(ptr[j])) ? ptr[j] + : '.'; +nil: + linebuf[lx++] = '\0'; +} + +void _kc_print_hex_dump(const char *level, + const char *prefix_str, int prefix_type, + int rowsize, int groupsize, + const void *buf, size_t len, bool ascii) +{ + const u8 *ptr = buf; + int i, linelen, remaining = len; + unsigned char linebuf[200]; + + if (rowsize != 16 && rowsize != 32) + rowsize = 16; + + for (i = 0; i < len; i += rowsize) { + linelen = min(remaining, rowsize); + remaining -= rowsize; + _kc_hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize, + linebuf, sizeof(linebuf), ascii); + + switch (prefix_type) { + case DUMP_PREFIX_ADDRESS: + printk("%s%s%*p: %s\n", level, prefix_str, + (int)(2 * sizeof(void *)), ptr + i, linebuf); + break; + case DUMP_PREFIX_OFFSET: + printk("%s%s%.8x: %s\n", level, prefix_str, i, linebuf); + break; + default: + printk("%s%s%s\n", level, prefix_str, linebuf); + break; + } + } +} +#endif /* < 2.6.22 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) ) +int ixgbe_dcb_netlink_register(void) +{ + return 0; +} + +int ixgbe_dcb_netlink_unregister(void) +{ + return 0; +} + +int ixgbe_copy_dcb_cfg(struct ixgbe_adapter *adapter, int tc_max) +{ + return 0; +} +#endif /* < 2.6.23 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ) +#ifdef NAPI +struct net_device *napi_to_poll_dev(struct napi_struct *napi) +{ + struct adapter_q_vector *q_vector = container_of(napi, + struct adapter_q_vector, + napi); + return &q_vector->poll_dev; +} + +int __kc_adapter_clean(struct net_device *netdev, int *budget) +{ + int work_done; + int work_to_do = min(*budget, netdev->quota); + /* kcompat.h netif_napi_add puts napi struct in "fake netdev->priv" */ + struct napi_struct *napi = netdev->priv; + work_done = napi->poll(napi, work_to_do); + *budget -= work_done; + netdev->quota -= work_done; + return (work_done >= work_to_do) ? 1 : 0; +} +#endif /* NAPI */ +#endif /* <= 2.6.24 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) ) +void _kc_pci_disable_link_state(struct pci_dev *pdev, int state) +{ + struct pci_dev *parent = pdev->bus->self; + u16 link_state; + int pos; + + if (!parent) + return; + + pos = pci_find_capability(parent, PCI_CAP_ID_EXP); + if (pos) { + pci_read_config_word(parent, pos + PCI_EXP_LNKCTL, &link_state); + link_state &= ~state; + pci_write_config_word(parent, pos + PCI_EXP_LNKCTL, link_state); + } +} +#endif /* < 2.6.26 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27) ) +#ifdef HAVE_TX_MQ +void _kc_netif_tx_stop_all_queues(struct net_device *netdev) +{ + struct adapter_struct *adapter = netdev_priv(netdev); + int i; + + netif_stop_queue(netdev); + if (netif_is_multiqueue(netdev)) + for (i = 0; i < adapter->num_tx_queues; i++) + netif_stop_subqueue(netdev, i); +} +void _kc_netif_tx_wake_all_queues(struct net_device *netdev) +{ + struct adapter_struct *adapter = netdev_priv(netdev); + int i; + + netif_wake_queue(netdev); + if (netif_is_multiqueue(netdev)) + for (i = 0; i < adapter->num_tx_queues; i++) + netif_wake_subqueue(netdev, i); +} +void _kc_netif_tx_start_all_queues(struct net_device *netdev) +{ + struct adapter_struct *adapter = netdev_priv(netdev); + int i; + + netif_start_queue(netdev); + if (netif_is_multiqueue(netdev)) + for (i = 0; i < adapter->num_tx_queues; i++) + netif_start_subqueue(netdev, i); +} +#endif /* HAVE_TX_MQ */ + +#ifndef __WARN_printf +void __kc_warn_slowpath(const char *file, int line, const char *fmt, ...) +{ + va_list args; + + printk(KERN_WARNING "------------[ cut here ]------------\n"); + printk(KERN_WARNING "WARNING: at %s:%d %s()\n", file, line); + va_start(args, fmt); + vprintk(fmt, args); + va_end(args); + + dump_stack(); +} +#endif /* __WARN_printf */ +#endif /* < 2.6.27 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ) + +int +_kc_pci_prepare_to_sleep(struct pci_dev *dev) +{ + pci_power_t target_state; + int error; + + target_state = pci_choose_state(dev, PMSG_SUSPEND); + + pci_enable_wake(dev, target_state, true); + + error = pci_set_power_state(dev, target_state); + + if (error) + pci_enable_wake(dev, target_state, false); + + return error; +} + +int +_kc_pci_wake_from_d3(struct pci_dev *dev, bool enable) +{ + int err; + + err = pci_enable_wake(dev, PCI_D3cold, enable); + if (err) + goto out; + + err = pci_enable_wake(dev, PCI_D3hot, enable); + +out: + return err; +} +#endif /* < 2.6.28 */ + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0) ) +void _kc_skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, + int off, int size) +{ + skb_fill_page_desc(skb, i, page, off, size); + skb->len += size; + skb->data_len += size; + skb->truesize += size; +} +#endif /* < 3.4.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ) +#ifdef HAVE_NETDEV_SELECT_QUEUE +#include <net/ip.h> +static u32 _kc_simple_tx_hashrnd; +static u32 _kc_simple_tx_hashrnd_initialized; + +u16 _kc_skb_tx_hash(struct net_device *dev, struct sk_buff *skb) +{ + u32 addr1, addr2, ports; + u32 hash, ihl; + u8 ip_proto = 0; + + if (unlikely(!_kc_simple_tx_hashrnd_initialized)) { + get_random_bytes(&_kc_simple_tx_hashrnd, 4); + _kc_simple_tx_hashrnd_initialized = 1; + } + + switch (skb->protocol) { + case htons(ETH_P_IP): + if (!(ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET))) + ip_proto = ip_hdr(skb)->protocol; + addr1 = ip_hdr(skb)->saddr; + addr2 = ip_hdr(skb)->daddr; + ihl = ip_hdr(skb)->ihl; + break; +#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) + case htons(ETH_P_IPV6): + ip_proto = ipv6_hdr(skb)->nexthdr; + addr1 = ipv6_hdr(skb)->saddr.s6_addr32[3]; + addr2 = ipv6_hdr(skb)->daddr.s6_addr32[3]; + ihl = (40 >> 2); + break; +#endif + default: + return 0; + } + + + switch (ip_proto) { + case IPPROTO_TCP: + case IPPROTO_UDP: + case IPPROTO_DCCP: + case IPPROTO_ESP: + case IPPROTO_AH: + case IPPROTO_SCTP: + case IPPROTO_UDPLITE: + ports = *((u32 *) (skb_network_header(skb) + (ihl * 4))); + break; + + default: + ports = 0; + break; + } + + hash = jhash_3words(addr1, addr2, ports, _kc_simple_tx_hashrnd); + + return (u16) (((u64) hash * dev->real_num_tx_queues) >> 32); +} +#endif /* HAVE_NETDEV_SELECT_QUEUE */ +#endif /* < 2.6.30 */ + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) ) +#ifdef HAVE_TX_MQ +#ifndef CONFIG_NETDEVICES_MULTIQUEUE +void _kc_netif_set_real_num_tx_queues(struct net_device *dev, unsigned int txq) +{ + unsigned int real_num = dev->real_num_tx_queues; + struct Qdisc *qdisc; + int i; + + if (unlikely(txq > dev->num_tx_queues)) + ; + else if (txq > real_num) + dev->real_num_tx_queues = txq; + else if ( txq < real_num) { + dev->real_num_tx_queues = txq; + for (i = txq; i < dev->num_tx_queues; i++) { + qdisc = netdev_get_tx_queue(dev, i)->qdisc; + if (qdisc) { + spin_lock_bh(qdisc_lock(qdisc)); + qdisc_reset(qdisc); + spin_unlock_bh(qdisc_lock(qdisc)); + } + } + } +} +#endif /* CONFIG_NETDEVICES_MULTIQUEUE */ +#endif /* HAVE_TX_MQ */ +#endif /* < 2.6.35 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36) ) +static const u32 _kc_flags_dup_features = + (ETH_FLAG_LRO | ETH_FLAG_NTUPLE | ETH_FLAG_RXHASH); + +u32 _kc_ethtool_op_get_flags(struct net_device *dev) +{ + return dev->features & _kc_flags_dup_features; +} + +int _kc_ethtool_op_set_flags(struct net_device *dev, u32 data, u32 supported) +{ + if (data & ~supported) + return -EINVAL; + + dev->features = ((dev->features & ~_kc_flags_dup_features) | + (data & _kc_flags_dup_features)); + return 0; +} +#endif /* < 2.6.36 */ + +/******************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39) ) +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(6,0))) +u8 _kc_netdev_get_num_tc(struct net_device *dev) +{ + struct adapter_struct *kc_adapter = netdev_priv(dev); + if (kc_adapter->flags & IXGBE_FLAG_DCB_ENABLED) + return kc_adapter->tc; + else + return 0; +} + +u8 _kc_netdev_get_prio_tc_map(struct net_device *dev, u8 up) +{ + struct adapter_struct *kc_adapter = netdev_priv(dev); + int tc; + u8 map; + + for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++) { + map = kc_adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap; + + if (map & (1 << up)) + return tc; + } + + return 0; +} +#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(6,0)) */ +#endif /* < 2.6.39 */ diff --git a/kernel/linux/kni/ethtool/ixgbe/kcompat.h b/kernel/linux/kni/ethtool/ixgbe/kcompat.h new file mode 100644 index 00000000..7c7d6c31 --- /dev/null +++ b/kernel/linux/kni/ethtool/ixgbe/kcompat.h @@ -0,0 +1,3140 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2012 Intel Corporation. + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _KCOMPAT_H_ +#define _KCOMPAT_H_ + +#ifndef LINUX_VERSION_CODE +#include <linux/version.h> +#else +#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) +#endif +#include <linux/init.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/udp.h> +#include <linux/mii.h> +#include <linux/vmalloc.h> +#include <asm/io.h> +#include <linux/ethtool.h> +#include <linux/if_vlan.h> + +/* NAPI enable/disable flags here */ +/* enable NAPI for ixgbe by default */ +#undef CONFIG_IXGBE_NAPI +#define CONFIG_IXGBE_NAPI +#define NAPI +#ifdef CONFIG_IXGBE_NAPI +#undef NAPI +#define NAPI +#endif /* CONFIG_IXGBE_NAPI */ +#ifdef IXGBE_NAPI +#undef NAPI +#define NAPI +#endif /* IXGBE_NAPI */ +#ifdef IXGBE_NO_NAPI +#undef NAPI +#endif /* IXGBE_NO_NAPI */ + +#define adapter_struct ixgbe_adapter +#define adapter_q_vector ixgbe_q_vector + +/* and finally set defines so that the code sees the changes */ +#ifdef NAPI +#ifndef CONFIG_IXGBE_NAPI +#define CONFIG_IXGBE_NAPI +#endif +#else +#undef CONFIG_IXGBE_NAPI +#endif /* NAPI */ + +/* packet split disable/enable */ +#ifdef DISABLE_PACKET_SPLIT +#ifndef CONFIG_IXGBE_DISABLE_PACKET_SPLIT +#define CONFIG_IXGBE_DISABLE_PACKET_SPLIT +#endif +#endif /* DISABLE_PACKET_SPLIT */ + +/* MSI compatibility code for all kernels and drivers */ +#ifdef DISABLE_PCI_MSI +#undef CONFIG_PCI_MSI +#endif +#ifndef CONFIG_PCI_MSI +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) ) +struct msix_entry { + u16 vector; /* kernel uses to write allocated vector */ + u16 entry; /* driver uses to specify entry, OS writes */ +}; +#endif +#undef pci_enable_msi +#define pci_enable_msi(a) -ENOTSUPP +#undef pci_disable_msi +#define pci_disable_msi(a) do {} while (0) +#undef pci_enable_msix +#define pci_enable_msix(a, b, c) -ENOTSUPP +#undef pci_disable_msix +#define pci_disable_msix(a) do {} while (0) +#define msi_remove_pci_irq_vectors(a) do {} while (0) +#endif /* CONFIG_PCI_MSI */ +#ifdef DISABLE_PM +#undef CONFIG_PM +#endif + +#ifdef DISABLE_NET_POLL_CONTROLLER +#undef CONFIG_NET_POLL_CONTROLLER +#endif + +#ifndef PMSG_SUSPEND +#define PMSG_SUSPEND 3 +#endif + +/* generic boolean compatibility */ +#undef TRUE +#undef FALSE +#define TRUE true +#define FALSE false +#ifdef GCC_VERSION +#if ( GCC_VERSION < 3000 ) +#define _Bool char +#endif +#else +#define _Bool char +#endif + +/* kernels less than 2.4.14 don't have this */ +#ifndef ETH_P_8021Q +#define ETH_P_8021Q 0x8100 +#endif + +#ifndef module_param +#define module_param(v,t,p) MODULE_PARM(v, "i"); +#endif + +#ifndef DMA_64BIT_MASK +#define DMA_64BIT_MASK 0xffffffffffffffffULL +#endif + +#ifndef DMA_32BIT_MASK +#define DMA_32BIT_MASK 0x00000000ffffffffULL +#endif + +#ifndef PCI_CAP_ID_EXP +#define PCI_CAP_ID_EXP 0x10 +#endif + +#ifndef PCIE_LINK_STATE_L0S +#define PCIE_LINK_STATE_L0S 1 +#endif +#ifndef PCIE_LINK_STATE_L1 +#define PCIE_LINK_STATE_L1 2 +#endif + +#ifndef mmiowb +#ifdef CONFIG_IA64 +#define mmiowb() asm volatile ("mf.a" ::: "memory") +#else +#define mmiowb() +#endif +#endif + +#ifndef SET_NETDEV_DEV +#define SET_NETDEV_DEV(net, pdev) +#endif + +#if !defined(HAVE_FREE_NETDEV) && ( LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0) ) +#define free_netdev(x) kfree(x) +#endif + +#ifdef HAVE_POLL_CONTROLLER +#define CONFIG_NET_POLL_CONTROLLER +#endif + +#ifndef SKB_DATAREF_SHIFT +/* if we do not have the infrastructure to detect if skb_header is cloned + just return false in all cases */ +#define skb_header_cloned(x) 0 +#endif + +#ifndef NETIF_F_GSO +#define gso_size tso_size +#define gso_segs tso_segs +#endif + +#ifndef NETIF_F_GRO +#define vlan_gro_receive(_napi, _vlgrp, _vlan, _skb) \ + vlan_hwaccel_receive_skb(_skb, _vlgrp, _vlan) +#define napi_gro_receive(_napi, _skb) netif_receive_skb(_skb) +#endif + +#ifndef NETIF_F_SCTP_CSUM +#define NETIF_F_SCTP_CSUM 0 +#endif + +#ifndef NETIF_F_LRO +#define NETIF_F_LRO (1 << 15) +#endif + +#ifndef NETIF_F_NTUPLE +#define NETIF_F_NTUPLE (1 << 27) +#endif + +#ifndef IPPROTO_SCTP +#define IPPROTO_SCTP 132 +#endif + +#ifndef CHECKSUM_PARTIAL +#define CHECKSUM_PARTIAL CHECKSUM_HW +#define CHECKSUM_COMPLETE CHECKSUM_HW +#endif + +#ifndef __read_mostly +#define __read_mostly +#endif + +#ifndef MII_RESV1 +#define MII_RESV1 0x17 /* Reserved... */ +#endif + +#ifndef unlikely +#define unlikely(_x) _x +#define likely(_x) _x +#endif + +#ifndef WARN_ON +#define WARN_ON(x) +#endif + +#ifndef PCI_DEVICE +#define PCI_DEVICE(vend,dev) \ + .vendor = (vend), .device = (dev), \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID +#endif + +#ifndef node_online +#define node_online(node) ((node) == 0) +#endif + +#ifndef num_online_cpus +#define num_online_cpus() smp_num_cpus +#endif + +#ifndef cpu_online +#define cpu_online(cpuid) test_bit((cpuid), &cpu_online_map) +#endif + +#ifndef _LINUX_RANDOM_H +#include <linux/random.h> +#endif + +#ifndef DECLARE_BITMAP +#ifndef BITS_TO_LONGS +#define BITS_TO_LONGS(bits) (((bits)+BITS_PER_LONG-1)/BITS_PER_LONG) +#endif +#define DECLARE_BITMAP(name,bits) long name[BITS_TO_LONGS(bits)] +#endif + +#ifndef VLAN_HLEN +#define VLAN_HLEN 4 +#endif + +#ifndef VLAN_ETH_HLEN +#define VLAN_ETH_HLEN 18 +#endif + +#ifndef VLAN_ETH_FRAME_LEN +#define VLAN_ETH_FRAME_LEN 1518 +#endif + +#if !defined(IXGBE_DCA) && !defined(IGB_DCA) +#define dca_get_tag(b) 0 +#define dca_add_requester(a) -1 +#define dca_remove_requester(b) do { } while(0) +#define DCA_PROVIDER_ADD 0x0001 +#define DCA_PROVIDER_REMOVE 0x0002 +#endif + +#ifndef DCA_GET_TAG_TWO_ARGS +#define dca3_get_tag(a,b) dca_get_tag(b) +#endif + +#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +#if defined(__i386__) || defined(__x86_64__) +#define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +#endif +#endif + +/* taken from 2.6.24 definition in linux/kernel.h */ +#ifndef IS_ALIGNED +#define IS_ALIGNED(x,a) (((x) % ((typeof(x))(a))) == 0) +#endif + +#ifndef NETIF_F_HW_VLAN_TX +struct _kc_vlan_ethhdr { + unsigned char h_dest[ETH_ALEN]; + unsigned char h_source[ETH_ALEN]; + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + __be16 h_vlan_encapsulated_proto; +}; +#define vlan_ethhdr _kc_vlan_ethhdr +struct _kc_vlan_hdr { + __be16 h_vlan_TCI; + __be16 h_vlan_encapsulated_proto; +}; +#define vlan_hdr _kc_vlan_hdr +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ) +#define vlan_tx_tag_present(_skb) 0 +#define vlan_tx_tag_get(_skb) 0 +#endif +#endif + +#ifndef VLAN_PRIO_SHIFT +#define VLAN_PRIO_SHIFT 13 +#endif + + +#ifndef __GFP_COLD +#define __GFP_COLD 0 +#endif + +/*****************************************************************************/ +/* Installations with ethtool version without eeprom, adapter id, or statistics + * support */ + +#ifndef ETH_GSTRING_LEN +#define ETH_GSTRING_LEN 32 +#endif + +#ifndef ETHTOOL_GSTATS +#define ETHTOOL_GSTATS 0x1d +#undef ethtool_drvinfo +#define ethtool_drvinfo k_ethtool_drvinfo +struct k_ethtool_drvinfo { + u32 cmd; + char driver[32]; + char version[32]; + char fw_version[32]; + char bus_info[32]; + char reserved1[32]; + char reserved2[16]; + u32 n_stats; + u32 testinfo_len; + u32 eedump_len; + u32 regdump_len; +}; + +struct ethtool_stats { + u32 cmd; + u32 n_stats; + u64 data[0]; +}; +#endif /* ETHTOOL_GSTATS */ + +#ifndef ETHTOOL_PHYS_ID +#define ETHTOOL_PHYS_ID 0x1c +#endif /* ETHTOOL_PHYS_ID */ + +#ifndef ETHTOOL_GSTRINGS +#define ETHTOOL_GSTRINGS 0x1b +enum ethtool_stringset { + ETH_SS_TEST = 0, + ETH_SS_STATS, +}; +struct ethtool_gstrings { + u32 cmd; /* ETHTOOL_GSTRINGS */ + u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ + u32 len; /* number of strings in the string set */ + u8 data[0]; +}; +#endif /* ETHTOOL_GSTRINGS */ + +#ifndef ETHTOOL_TEST +#define ETHTOOL_TEST 0x1a +enum ethtool_test_flags { + ETH_TEST_FL_OFFLINE = (1 << 0), + ETH_TEST_FL_FAILED = (1 << 1), +}; +struct ethtool_test { + u32 cmd; + u32 flags; + u32 reserved; + u32 len; + u64 data[0]; +}; +#endif /* ETHTOOL_TEST */ + +#ifndef ETHTOOL_GEEPROM +#define ETHTOOL_GEEPROM 0xb +#undef ETHTOOL_GREGS +struct ethtool_eeprom { + u32 cmd; + u32 magic; + u32 offset; + u32 len; + u8 data[0]; +}; + +struct ethtool_value { + u32 cmd; + u32 data; +}; +#endif /* ETHTOOL_GEEPROM */ + +#ifndef ETHTOOL_GLINK +#define ETHTOOL_GLINK 0xa +#endif /* ETHTOOL_GLINK */ + +#ifndef ETHTOOL_GWOL +#define ETHTOOL_GWOL 0x5 +#define ETHTOOL_SWOL 0x6 +#define SOPASS_MAX 6 +struct ethtool_wolinfo { + u32 cmd; + u32 supported; + u32 wolopts; + u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ +}; +#endif /* ETHTOOL_GWOL */ + +#ifndef ETHTOOL_GREGS +#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers */ +#define ethtool_regs _kc_ethtool_regs +/* for passing big chunks of data */ +struct _kc_ethtool_regs { + u32 cmd; + u32 version; /* driver-specific, indicates different chips/revs */ + u32 len; /* bytes */ + u8 data[0]; +}; +#endif /* ETHTOOL_GREGS */ + +#ifndef ETHTOOL_GMSGLVL +#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ +#endif +#ifndef ETHTOOL_SMSGLVL +#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level, priv. */ +#endif +#ifndef ETHTOOL_NWAY_RST +#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation, priv */ +#endif +#ifndef ETHTOOL_GLINK +#define ETHTOOL_GLINK 0x0000000a /* Get link status */ +#endif +#ifndef ETHTOOL_GEEPROM +#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ +#endif +#ifndef ETHTOOL_SEEPROM +#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data */ +#endif +#ifndef ETHTOOL_GCOALESCE +#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ +/* for configuring coalescing parameters of chip */ +#define ethtool_coalesce _kc_ethtool_coalesce +struct _kc_ethtool_coalesce { + u32 cmd; /* ETHTOOL_{G,S}COALESCE */ + + /* How many usecs to delay an RX interrupt after + * a packet arrives. If 0, only rx_max_coalesced_frames + * is used. + */ + u32 rx_coalesce_usecs; + + /* How many packets to delay an RX interrupt after + * a packet arrives. If 0, only rx_coalesce_usecs is + * used. It is illegal to set both usecs and max frames + * to zero as this would cause RX interrupts to never be + * generated. + */ + u32 rx_max_coalesced_frames; + + /* Same as above two parameters, except that these values + * apply while an IRQ is being serviced by the host. Not + * all cards support this feature and the values are ignored + * in that case. + */ + u32 rx_coalesce_usecs_irq; + u32 rx_max_coalesced_frames_irq; + + /* How many usecs to delay a TX interrupt after + * a packet is sent. If 0, only tx_max_coalesced_frames + * is used. + */ + u32 tx_coalesce_usecs; + + /* How many packets to delay a TX interrupt after + * a packet is sent. If 0, only tx_coalesce_usecs is + * used. It is illegal to set both usecs and max frames + * to zero as this would cause TX interrupts to never be + * generated. + */ + u32 tx_max_coalesced_frames; + + /* Same as above two parameters, except that these values + * apply while an IRQ is being serviced by the host. Not + * all cards support this feature and the values are ignored + * in that case. + */ + u32 tx_coalesce_usecs_irq; + u32 tx_max_coalesced_frames_irq; + + /* How many usecs to delay in-memory statistics + * block updates. Some drivers do not have an in-memory + * statistic block, and in such cases this value is ignored. + * This value must not be zero. + */ + u32 stats_block_coalesce_usecs; + + /* Adaptive RX/TX coalescing is an algorithm implemented by + * some drivers to improve latency under low packet rates and + * improve throughput under high packet rates. Some drivers + * only implement one of RX or TX adaptive coalescing. Anything + * not implemented by the driver causes these values to be + * silently ignored. + */ + u32 use_adaptive_rx_coalesce; + u32 use_adaptive_tx_coalesce; + + /* When the packet rate (measured in packets per second) + * is below pkt_rate_low, the {rx,tx}_*_low parameters are + * used. + */ + u32 pkt_rate_low; + u32 rx_coalesce_usecs_low; + u32 rx_max_coalesced_frames_low; + u32 tx_coalesce_usecs_low; + u32 tx_max_coalesced_frames_low; + + /* When the packet rate is below pkt_rate_high but above + * pkt_rate_low (both measured in packets per second) the + * normal {rx,tx}_* coalescing parameters are used. + */ + + /* When the packet rate is (measured in packets per second) + * is above pkt_rate_high, the {rx,tx}_*_high parameters are + * used. + */ + u32 pkt_rate_high; + u32 rx_coalesce_usecs_high; + u32 rx_max_coalesced_frames_high; + u32 tx_coalesce_usecs_high; + u32 tx_max_coalesced_frames_high; + + /* How often to do adaptive coalescing packet rate sampling, + * measured in seconds. Must not be zero. + */ + u32 rate_sample_interval; +}; +#endif /* ETHTOOL_GCOALESCE */ + +#ifndef ETHTOOL_SCOALESCE +#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ +#endif +#ifndef ETHTOOL_GRINGPARAM +#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ +/* for configuring RX/TX ring parameters */ +#define ethtool_ringparam _kc_ethtool_ringparam +struct _kc_ethtool_ringparam { + u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ + + /* Read only attributes. These indicate the maximum number + * of pending RX/TX ring entries the driver will allow the + * user to set. + */ + u32 rx_max_pending; + u32 rx_mini_max_pending; + u32 rx_jumbo_max_pending; + u32 tx_max_pending; + + /* Values changeable by the user. The valid values are + * in the range 1 to the "*_max_pending" counterpart above. + */ + u32 rx_pending; + u32 rx_mini_pending; + u32 rx_jumbo_pending; + u32 tx_pending; +}; +#endif /* ETHTOOL_GRINGPARAM */ + +#ifndef ETHTOOL_SRINGPARAM +#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters, priv. */ +#endif +#ifndef ETHTOOL_GPAUSEPARAM +#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ +/* for configuring link flow control parameters */ +#define ethtool_pauseparam _kc_ethtool_pauseparam +struct _kc_ethtool_pauseparam { + u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ + + /* If the link is being auto-negotiated (via ethtool_cmd.autoneg + * being true) the user may set 'autoneg' here non-zero to have the + * pause parameters be auto-negotiated too. In such a case, the + * {rx,tx}_pause values below determine what capabilities are + * advertised. + * + * If 'autoneg' is zero or the link is not being auto-negotiated, + * then {rx,tx}_pause force the driver to use/not-use pause + * flow control. + */ + u32 autoneg; + u32 rx_pause; + u32 tx_pause; +}; +#endif /* ETHTOOL_GPAUSEPARAM */ + +#ifndef ETHTOOL_SPAUSEPARAM +#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ +#endif +#ifndef ETHTOOL_GRXCSUM +#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_SRXCSUM +#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_GTXCSUM +#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_STXCSUM +#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_GSG +#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable + * (ethtool_value) */ +#endif +#ifndef ETHTOOL_SSG +#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable + * (ethtool_value). */ +#endif +#ifndef ETHTOOL_TEST +#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test, priv. */ +#endif +#ifndef ETHTOOL_GSTRINGS +#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ +#endif +#ifndef ETHTOOL_PHYS_ID +#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ +#endif +#ifndef ETHTOOL_GSTATS +#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ +#endif +#ifndef ETHTOOL_GTSO +#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ +#endif +#ifndef ETHTOOL_STSO +#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ +#endif + +#ifndef ETHTOOL_BUSINFO_LEN +#define ETHTOOL_BUSINFO_LEN 32 +#endif + +#ifndef RHEL_RELEASE_CODE +/* NOTE: RHEL_RELEASE_* introduced in RHEL4.5 */ +#define RHEL_RELEASE_CODE 0 +#endif +#ifndef RHEL_RELEASE_VERSION +#define RHEL_RELEASE_VERSION(a,b) (((a) << 8) + (b)) +#endif +#ifndef AX_RELEASE_CODE +#define AX_RELEASE_CODE 0 +#endif +#ifndef AX_RELEASE_VERSION +#define AX_RELEASE_VERSION(a,b) (((a) << 8) + (b)) +#endif + +/* SuSE version macro is the same as Linux kernel version */ +#ifndef SLE_VERSION +#define SLE_VERSION(a,b,c) KERNEL_VERSION(a,b,c) +#endif +#ifndef SLE_VERSION_CODE +#ifdef CONFIG_SUSE_KERNEL +/* SLES11 GA is 2.6.27 based */ +#if ( LINUX_VERSION_CODE == KERNEL_VERSION(2,6,27) ) +#define SLE_VERSION_CODE SLE_VERSION(11,0,0) +#elif ( LINUX_VERSION_CODE == KERNEL_VERSION(2,6,32) ) +/* SLES11 SP1 is 2.6.32 based */ +#define SLE_VERSION_CODE SLE_VERSION(11,1,0) +#else +#define SLE_VERSION_CODE 0 +#endif +#else /* CONFIG_SUSE_KERNEL */ +#define SLE_VERSION_CODE 0 +#endif /* CONFIG_SUSE_KERNEL */ +#endif /* SLE_VERSION_CODE */ + +#ifdef __KLOCWORK__ +#ifdef ARRAY_SIZE +#undef ARRAY_SIZE +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) +#endif +#endif /* __KLOCWORK__ */ + +/*****************************************************************************/ +/* 2.4.3 => 2.4.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3) ) + +/**************************************/ +/* PCI DRIVER API */ + +#ifndef pci_set_dma_mask +#define pci_set_dma_mask _kc_pci_set_dma_mask +extern int _kc_pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask); +#endif + +#ifndef pci_request_regions +#define pci_request_regions _kc_pci_request_regions +extern int _kc_pci_request_regions(struct pci_dev *pdev, char *res_name); +#endif + +#ifndef pci_release_regions +#define pci_release_regions _kc_pci_release_regions +extern void _kc_pci_release_regions(struct pci_dev *pdev); +#endif + +/**************************************/ +/* NETWORK DRIVER API */ + +#ifndef alloc_etherdev +#define alloc_etherdev _kc_alloc_etherdev +extern struct net_device * _kc_alloc_etherdev(int sizeof_priv); +#endif + +#ifndef is_valid_ether_addr +#define is_valid_ether_addr _kc_is_valid_ether_addr +extern int _kc_is_valid_ether_addr(u8 *addr); +#endif + +/**************************************/ +/* MISCELLANEOUS */ + +#ifndef INIT_TQUEUE +#define INIT_TQUEUE(_tq, _routine, _data) \ + do { \ + INIT_LIST_HEAD(&(_tq)->list); \ + (_tq)->sync = 0; \ + (_tq)->routine = _routine; \ + (_tq)->data = _data; \ + } while (0) +#endif + +#endif /* 2.4.3 => 2.4.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,5) ) +/* Generic MII registers. */ +#define MII_BMCR 0x00 /* Basic mode control register */ +#define MII_BMSR 0x01 /* Basic mode status register */ +#define MII_PHYSID1 0x02 /* PHYS ID 1 */ +#define MII_PHYSID2 0x03 /* PHYS ID 2 */ +#define MII_ADVERTISE 0x04 /* Advertisement control reg */ +#define MII_LPA 0x05 /* Link partner ability reg */ +#define MII_EXPANSION 0x06 /* Expansion register */ +/* Basic mode control register. */ +#define BMCR_FULLDPLX 0x0100 /* Full duplex */ +#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ +/* Basic mode status register. */ +#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ +#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ +#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ +#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ +#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ +#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ +/* Advertisement control register. */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL) +/* Expansion register for auto-negotiation. */ +#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ +#endif + +/*****************************************************************************/ +/* 2.4.6 => 2.4.3 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6) ) + +#ifndef pci_set_power_state +#define pci_set_power_state _kc_pci_set_power_state +extern int _kc_pci_set_power_state(struct pci_dev *dev, int state); +#endif + +#ifndef pci_enable_wake +#define pci_enable_wake _kc_pci_enable_wake +extern int _kc_pci_enable_wake(struct pci_dev *pdev, u32 state, int enable); +#endif + +#ifndef pci_disable_device +#define pci_disable_device _kc_pci_disable_device +extern void _kc_pci_disable_device(struct pci_dev *pdev); +#endif + +/* PCI PM entry point syntax changed, so don't support suspend/resume */ +#undef CONFIG_PM + +#endif /* 2.4.6 => 2.4.3 */ + +#ifndef HAVE_PCI_SET_MWI +#define pci_set_mwi(X) pci_write_config_word(X, \ + PCI_COMMAND, adapter->hw.bus.pci_cmd_word | \ + PCI_COMMAND_INVALIDATE); +#define pci_clear_mwi(X) pci_write_config_word(X, \ + PCI_COMMAND, adapter->hw.bus.pci_cmd_word & \ + ~PCI_COMMAND_INVALIDATE); +#endif + +/*****************************************************************************/ +/* 2.4.10 => 2.4.9 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,10) ) + +/**************************************/ +/* MODULE API */ + +#ifndef MODULE_LICENSE + #define MODULE_LICENSE(X) +#endif + +/**************************************/ +/* OTHER */ + +#undef min +#define min(x,y) ({ \ + const typeof(x) _x = (x); \ + const typeof(y) _y = (y); \ + (void) (&_x == &_y); \ + _x < _y ? _x : _y; }) + +#undef max +#define max(x,y) ({ \ + const typeof(x) _x = (x); \ + const typeof(y) _y = (y); \ + (void) (&_x == &_y); \ + _x > _y ? _x : _y; }) + +#define min_t(type,x,y) ({ \ + type _x = (x); \ + type _y = (y); \ + _x < _y ? _x : _y; }) + +#define max_t(type,x,y) ({ \ + type _x = (x); \ + type _y = (y); \ + _x > _y ? _x : _y; }) + +#ifndef list_for_each_safe +#define list_for_each_safe(pos, n, head) \ + for (pos = (head)->next, n = pos->next; pos != (head); \ + pos = n, n = pos->next) +#endif + +#ifndef ____cacheline_aligned_in_smp +#ifdef CONFIG_SMP +#define ____cacheline_aligned_in_smp ____cacheline_aligned +#else +#define ____cacheline_aligned_in_smp +#endif /* CONFIG_SMP */ +#endif + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,8) ) +extern int _kc_snprintf(char * buf, size_t size, const char *fmt, ...); +#define snprintf(buf, size, fmt, args...) _kc_snprintf(buf, size, fmt, ##args) +extern int _kc_vsnprintf(char *buf, size_t size, const char *fmt, va_list args); +#define vsnprintf(buf, size, fmt, args) _kc_vsnprintf(buf, size, fmt, args) +#else /* 2.4.8 => 2.4.9 */ +extern int snprintf(char * buf, size_t size, const char *fmt, ...); +extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args); +#endif +#endif /* 2.4.10 -> 2.4.6 */ + + +/*****************************************************************************/ +/* 2.4.12 => 2.4.10 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,12) ) +#ifndef HAVE_NETIF_MSG +#define HAVE_NETIF_MSG 1 +enum { + NETIF_MSG_DRV = 0x0001, + NETIF_MSG_PROBE = 0x0002, + NETIF_MSG_LINK = 0x0004, + NETIF_MSG_TIMER = 0x0008, + NETIF_MSG_IFDOWN = 0x0010, + NETIF_MSG_IFUP = 0x0020, + NETIF_MSG_RX_ERR = 0x0040, + NETIF_MSG_TX_ERR = 0x0080, + NETIF_MSG_TX_QUEUED = 0x0100, + NETIF_MSG_INTR = 0x0200, + NETIF_MSG_TX_DONE = 0x0400, + NETIF_MSG_RX_STATUS = 0x0800, + NETIF_MSG_PKTDATA = 0x1000, + NETIF_MSG_HW = 0x2000, + NETIF_MSG_WOL = 0x4000, +}; + +#define netif_msg_drv(p) ((p)->msg_enable & NETIF_MSG_DRV) +#define netif_msg_probe(p) ((p)->msg_enable & NETIF_MSG_PROBE) +#define netif_msg_link(p) ((p)->msg_enable & NETIF_MSG_LINK) +#define netif_msg_timer(p) ((p)->msg_enable & NETIF_MSG_TIMER) +#define netif_msg_ifdown(p) ((p)->msg_enable & NETIF_MSG_IFDOWN) +#define netif_msg_ifup(p) ((p)->msg_enable & NETIF_MSG_IFUP) +#define netif_msg_rx_err(p) ((p)->msg_enable & NETIF_MSG_RX_ERR) +#define netif_msg_tx_err(p) ((p)->msg_enable & NETIF_MSG_TX_ERR) +#define netif_msg_tx_queued(p) ((p)->msg_enable & NETIF_MSG_TX_QUEUED) +#define netif_msg_intr(p) ((p)->msg_enable & NETIF_MSG_INTR) +#define netif_msg_tx_done(p) ((p)->msg_enable & NETIF_MSG_TX_DONE) +#define netif_msg_rx_status(p) ((p)->msg_enable & NETIF_MSG_RX_STATUS) +#define netif_msg_pktdata(p) ((p)->msg_enable & NETIF_MSG_PKTDATA) +#endif /* !HAVE_NETIF_MSG */ +#endif /* 2.4.12 => 2.4.10 */ + +/*****************************************************************************/ +/* 2.4.13 => 2.4.12 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,13) ) + +/**************************************/ +/* PCI DMA MAPPING */ + +#ifndef virt_to_page + #define virt_to_page(v) (mem_map + (virt_to_phys(v) >> PAGE_SHIFT)) +#endif + +#ifndef pci_map_page +#define pci_map_page _kc_pci_map_page +extern u64 _kc_pci_map_page(struct pci_dev *dev, struct page *page, unsigned long offset, size_t size, int direction); +#endif + +#ifndef pci_unmap_page +#define pci_unmap_page _kc_pci_unmap_page +extern void _kc_pci_unmap_page(struct pci_dev *dev, u64 dma_addr, size_t size, int direction); +#endif + +/* pci_set_dma_mask takes dma_addr_t, which is only 32-bits prior to 2.4.13 */ + +#undef DMA_32BIT_MASK +#define DMA_32BIT_MASK 0xffffffff +#undef DMA_64BIT_MASK +#define DMA_64BIT_MASK 0xffffffff + +/**************************************/ +/* OTHER */ + +#ifndef cpu_relax +#define cpu_relax() rep_nop() +#endif + +struct vlan_ethhdr { + unsigned char h_dest[ETH_ALEN]; + unsigned char h_source[ETH_ALEN]; + unsigned short h_vlan_proto; + unsigned short h_vlan_TCI; + unsigned short h_vlan_encapsulated_proto; +}; +#endif /* 2.4.13 => 2.4.12 */ + +/*****************************************************************************/ +/* 2.4.17 => 2.4.12 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17) ) + +#ifndef __devexit_p + #define __devexit_p(x) &(x) +#endif + +#endif /* 2.4.17 => 2.4.13 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,18) ) +#define NETIF_MSG_HW 0x2000 +#define NETIF_MSG_WOL 0x4000 + +#ifndef netif_msg_hw +#define netif_msg_hw(p) ((p)->msg_enable & NETIF_MSG_HW) +#endif +#ifndef netif_msg_wol +#define netif_msg_wol(p) ((p)->msg_enable & NETIF_MSG_WOL) +#endif +#endif /* 2.4.18 */ + +/*****************************************************************************/ + +/*****************************************************************************/ +/* 2.4.20 => 2.4.19 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,20) ) + +/* we won't support NAPI on less than 2.4.20 */ +#ifdef NAPI +#undef NAPI +#undef CONFIG_IXGBE_NAPI +#endif + +#endif /* 2.4.20 => 2.4.19 */ + +/*****************************************************************************/ +/* 2.4.22 => 2.4.17 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) ) +#define pci_name(x) ((x)->slot_name) +#endif + +/*****************************************************************************/ +/* 2.4.22 => 2.4.17 */ + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,22) ) +#ifndef IXGBE_NO_LRO +/* Don't enable LRO for these legacy kernels */ +#define IXGBE_NO_LRO +#endif +#endif + +/*****************************************************************************/ +/*****************************************************************************/ +/* 2.4.23 => 2.4.22 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) ) +/*****************************************************************************/ +#ifdef NAPI +#ifndef netif_poll_disable +#define netif_poll_disable(x) _kc_netif_poll_disable(x) +static inline void _kc_netif_poll_disable(struct net_device *netdev) +{ + while (test_and_set_bit(__LINK_STATE_RX_SCHED, &netdev->state)) { + /* No hurry */ + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(1); + } +} +#endif +#ifndef netif_poll_enable +#define netif_poll_enable(x) _kc_netif_poll_enable(x) +static inline void _kc_netif_poll_enable(struct net_device *netdev) +{ + clear_bit(__LINK_STATE_RX_SCHED, &netdev->state); +} +#endif +#endif /* NAPI */ +#ifndef netif_tx_disable +#define netif_tx_disable(x) _kc_netif_tx_disable(x) +static inline void _kc_netif_tx_disable(struct net_device *dev) +{ + spin_lock_bh(&dev->xmit_lock); + netif_stop_queue(dev); + spin_unlock_bh(&dev->xmit_lock); +} +#endif +#else /* 2.4.23 => 2.4.22 */ +#define HAVE_SCTP +#endif /* 2.4.23 => 2.4.22 */ + +/*****************************************************************************/ +/* 2.6.4 => 2.6.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,25) || \ + ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && \ + LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) ) +#define ETHTOOL_OPS_COMPAT +#endif /* 2.6.4 => 2.6.0 */ + +/*****************************************************************************/ +/* 2.5.71 => 2.4.x */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,71) ) +#define sk_protocol protocol +#define pci_get_device pci_find_device +#endif /* 2.5.70 => 2.4.x */ + +/*****************************************************************************/ +/* < 2.4.27 or 2.6.0 <= 2.6.5 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) || \ + ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) && \ + LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) ) ) + +#ifndef netif_msg_init +#define netif_msg_init _kc_netif_msg_init +static inline u32 _kc_netif_msg_init(int debug_value, int default_msg_enable_bits) +{ + /* use default */ + if (debug_value < 0 || debug_value >= (sizeof(u32) * 8)) + return default_msg_enable_bits; + if (debug_value == 0) /* no output */ + return 0; + /* set low N bits */ + return (1 << debug_value) -1; +} +#endif + +#endif /* < 2.4.27 or 2.6.0 <= 2.6.5 */ +/*****************************************************************************/ +#if (( LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) ) || \ + (( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) && \ + ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,3) ))) +#define netdev_priv(x) x->priv +#endif + +/*****************************************************************************/ +/* <= 2.5.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) ) +#include <linux/rtnetlink.h> +#undef pci_register_driver +#define pci_register_driver pci_module_init + +/* + * Most of the dma compat code is copied/modified from the 2.4.37 + * /include/linux/libata-compat.h header file + */ +/* These definitions mirror those in pci.h, so they can be used + * interchangeably with their PCI_ counterparts */ +enum dma_data_direction { + DMA_BIDIRECTIONAL = 0, + DMA_TO_DEVICE = 1, + DMA_FROM_DEVICE = 2, + DMA_NONE = 3, +}; + +struct device { + struct pci_dev pdev; +}; + +static inline struct pci_dev *to_pci_dev (struct device *dev) +{ + return (struct pci_dev *) dev; +} +static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) +{ + return (struct device *) pdev; +} + +#define pdev_printk(lvl, pdev, fmt, args...) \ + printk("%s %s: " fmt, lvl, pci_name(pdev), ## args) +#define dev_err(dev, fmt, args...) \ + pdev_printk(KERN_ERR, to_pci_dev(dev), fmt, ## args) +#define dev_info(dev, fmt, args...) \ + pdev_printk(KERN_INFO, to_pci_dev(dev), fmt, ## args) +#define dev_warn(dev, fmt, args...) \ + pdev_printk(KERN_WARNING, to_pci_dev(dev), fmt, ## args) + +/* NOTE: dangerous! we ignore the 'gfp' argument */ +#define dma_alloc_coherent(dev,sz,dma,gfp) \ + pci_alloc_consistent(to_pci_dev(dev),(sz),(dma)) +#define dma_free_coherent(dev,sz,addr,dma_addr) \ + pci_free_consistent(to_pci_dev(dev),(sz),(addr),(dma_addr)) + +#define dma_map_page(dev,a,b,c,d) \ + pci_map_page(to_pci_dev(dev),(a),(b),(c),(d)) +#define dma_unmap_page(dev,a,b,c) \ + pci_unmap_page(to_pci_dev(dev),(a),(b),(c)) + +#define dma_map_single(dev,a,b,c) \ + pci_map_single(to_pci_dev(dev),(a),(b),(c)) +#define dma_unmap_single(dev,a,b,c) \ + pci_unmap_single(to_pci_dev(dev),(a),(b),(c)) + +#define dma_sync_single(dev,a,b,c) \ + pci_dma_sync_single(to_pci_dev(dev),(a),(b),(c)) + +/* for range just sync everything, that's all the pci API can do */ +#define dma_sync_single_range(dev,addr,off,sz,dir) \ + pci_dma_sync_single(to_pci_dev(dev),(addr),(off)+(sz),(dir)) + +#define dma_set_mask(dev,mask) \ + pci_set_dma_mask(to_pci_dev(dev),(mask)) + +/* hlist_* code - double linked lists */ +struct hlist_head { + struct hlist_node *first; +}; + +struct hlist_node { + struct hlist_node *next, **pprev; +}; + +static inline void __hlist_del(struct hlist_node *n) +{ + struct hlist_node *next = n->next; + struct hlist_node **pprev = n->pprev; + *pprev = next; + if (next) + next->pprev = pprev; +} + +static inline void hlist_del(struct hlist_node *n) +{ + __hlist_del(n); + n->next = NULL; + n->pprev = NULL; +} + +static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h) +{ + struct hlist_node *first = h->first; + n->next = first; + if (first) + first->pprev = &n->next; + h->first = n; + n->pprev = &h->first; +} + +static inline int hlist_empty(const struct hlist_head *h) +{ + return !h->first; +} +#define HLIST_HEAD_INIT { .first = NULL } +#define HLIST_HEAD(name) struct hlist_head name = { .first = NULL } +#define INIT_HLIST_HEAD(ptr) ((ptr)->first = NULL) +static inline void INIT_HLIST_NODE(struct hlist_node *h) +{ + h->next = NULL; + h->pprev = NULL; +} +#define hlist_entry(ptr, type, member) container_of(ptr,type,member) + +#define hlist_for_each_entry(tpos, pos, head, member) \ + for (pos = (head)->first; \ + pos && ({ prefetch(pos->next); 1;}) && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +#define hlist_for_each_entry_safe(tpos, pos, n, head, member) \ + for (pos = (head)->first; \ + pos && ({ n = pos->next; 1; }) && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ + pos = n) + +#ifndef might_sleep +#define might_sleep() +#endif +#else +static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) +{ + return &pdev->dev; +} +#endif /* <= 2.5.0 */ + +/*****************************************************************************/ +/* 2.5.28 => 2.4.23 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,5,28) ) + +static inline void _kc_synchronize_irq(void) +{ + synchronize_irq(); +} +#undef synchronize_irq +#define synchronize_irq(X) _kc_synchronize_irq() + +#include <linux/tqueue.h> +#define work_struct tq_struct +#undef INIT_WORK +#define INIT_WORK(a,b) INIT_TQUEUE(a,(void (*)(void *))b,a) +#undef container_of +#define container_of list_entry +#define schedule_work schedule_task +#define flush_scheduled_work flush_scheduled_tasks +#define cancel_work_sync(x) flush_scheduled_work() + +#endif /* 2.5.28 => 2.4.17 */ + +/*****************************************************************************/ +/* 2.6.0 => 2.5.28 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) +#undef get_cpu +#define get_cpu() smp_processor_id() +#undef put_cpu +#define put_cpu() do { } while(0) +#define MODULE_INFO(version, _version) +#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT +#define CONFIG_E1000_DISABLE_PACKET_SPLIT 1 +#endif +#define CONFIG_IGB_DISABLE_PACKET_SPLIT 1 + +#define dma_set_coherent_mask(dev,mask) 1 + +#undef dev_put +#define dev_put(dev) __dev_put(dev) + +#ifndef skb_fill_page_desc +#define skb_fill_page_desc _kc_skb_fill_page_desc +extern void _kc_skb_fill_page_desc(struct sk_buff *skb, int i, struct page *page, int off, int size); +#endif + +#undef ALIGN +#define ALIGN(x,a) (((x)+(a)-1)&~((a)-1)) + +#ifndef page_count +#define page_count(p) atomic_read(&(p)->count) +#endif + +#ifdef MAX_NUMNODES +#undef MAX_NUMNODES +#endif +#define MAX_NUMNODES 1 + +/* find_first_bit and find_next bit are not defined for most + * 2.4 kernels (except for the redhat 2.4.21 kernels + */ +#include <linux/bitops.h> +#define BITOP_WORD(nr) ((nr) / BITS_PER_LONG) +#undef find_next_bit +#define find_next_bit _kc_find_next_bit +extern unsigned long _kc_find_next_bit(const unsigned long *addr, + unsigned long size, + unsigned long offset); +#define find_first_bit(addr, size) find_next_bit((addr), (size), 0) + + +#ifndef netdev_name +static inline const char *_kc_netdev_name(const struct net_device *dev) +{ + if (strchr(dev->name, '%')) + return "(unregistered net_device)"; + return dev->name; +} +#define netdev_name(netdev) _kc_netdev_name(netdev) +#endif /* netdev_name */ + +#ifndef strlcpy +#define strlcpy _kc_strlcpy +extern size_t _kc_strlcpy(char *dest, const char *src, size_t size); +#endif /* strlcpy */ + +#endif /* 2.6.0 => 2.5.28 */ + +/*****************************************************************************/ +/* 2.6.4 => 2.6.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) +#define MODULE_VERSION(_version) MODULE_INFO(version, _version) +#endif /* 2.6.4 => 2.6.0 */ + +/*****************************************************************************/ +/* 2.6.5 => 2.6.0 */ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) ) +#define dma_sync_single_for_cpu dma_sync_single +#define dma_sync_single_for_device dma_sync_single +#define dma_sync_single_range_for_cpu dma_sync_single_range +#define dma_sync_single_range_for_device dma_sync_single_range +#ifndef pci_dma_mapping_error +#define pci_dma_mapping_error _kc_pci_dma_mapping_error +static inline int _kc_pci_dma_mapping_error(dma_addr_t dma_addr) +{ + return dma_addr == 0; +} +#endif +#endif /* 2.6.5 => 2.6.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,4) ) +extern int _kc_scnprintf(char * buf, size_t size, const char *fmt, ...); +#define scnprintf(buf, size, fmt, args...) _kc_scnprintf(buf, size, fmt, ##args) +#endif /* < 2.6.4 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,6) ) +/* taken from 2.6 include/linux/bitmap.h */ +#undef bitmap_zero +#define bitmap_zero _kc_bitmap_zero +static inline void _kc_bitmap_zero(unsigned long *dst, int nbits) +{ + if (nbits <= BITS_PER_LONG) + *dst = 0UL; + else { + int len = BITS_TO_LONGS(nbits) * sizeof(unsigned long); + memset(dst, 0, len); + } +} +#define random_ether_addr _kc_random_ether_addr +static inline void _kc_random_ether_addr(u8 *addr) +{ + get_random_bytes(addr, ETH_ALEN); + addr[0] &= 0xfe; /* clear multicast */ + addr[0] |= 0x02; /* set local assignment */ +} +#define page_to_nid(x) 0 + +#endif /* < 2.6.6 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,7) ) +#undef if_mii +#define if_mii _kc_if_mii +static inline struct mii_ioctl_data *_kc_if_mii(struct ifreq *rq) +{ + return (struct mii_ioctl_data *) &rq->ifr_ifru; +} + +#ifndef __force +#define __force +#endif +#endif /* < 2.6.7 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) ) +#ifndef PCI_EXP_DEVCTL +#define PCI_EXP_DEVCTL 8 +#endif +#ifndef PCI_EXP_DEVCTL_CERE +#define PCI_EXP_DEVCTL_CERE 0x0001 +#endif +#define msleep(x) do { set_current_state(TASK_UNINTERRUPTIBLE); \ + schedule_timeout((x * HZ)/1000 + 2); \ + } while (0) + +#endif /* < 2.6.8 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9)) +#include <net/dsfield.h> +#define __iomem + +#ifndef kcalloc +#define kcalloc(n, size, flags) _kc_kzalloc(((n) * (size)), flags) +extern void *_kc_kzalloc(size_t size, int flags); +#endif +#define MSEC_PER_SEC 1000L +static inline unsigned int _kc_jiffies_to_msecs(const unsigned long j) +{ +#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ) + return (MSEC_PER_SEC / HZ) * j; +#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC) + return (j + (HZ / MSEC_PER_SEC) - 1)/(HZ / MSEC_PER_SEC); +#else + return (j * MSEC_PER_SEC) / HZ; +#endif +} +static inline unsigned long _kc_msecs_to_jiffies(const unsigned int m) +{ + if (m > _kc_jiffies_to_msecs(MAX_JIFFY_OFFSET)) + return MAX_JIFFY_OFFSET; +#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ) + return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ); +#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC) + return m * (HZ / MSEC_PER_SEC); +#else + return (m * HZ + MSEC_PER_SEC - 1) / MSEC_PER_SEC; +#endif +} + +#define msleep_interruptible _kc_msleep_interruptible +static inline unsigned long _kc_msleep_interruptible(unsigned int msecs) +{ + unsigned long timeout = _kc_msecs_to_jiffies(msecs) + 1; + + while (timeout && !signal_pending(current)) { + __set_current_state(TASK_INTERRUPTIBLE); + timeout = schedule_timeout(timeout); + } + return _kc_jiffies_to_msecs(timeout); +} + +/* Basic mode control register. */ +#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ + +#ifndef __le16 +#define __le16 u16 +#endif +#ifndef __le32 +#define __le32 u32 +#endif +#ifndef __le64 +#define __le64 u64 +#endif +#ifndef __be16 +#define __be16 u16 +#endif +#ifndef __be32 +#define __be32 u32 +#endif +#ifndef __be64 +#define __be64 u64 +#endif + +static inline struct vlan_ethhdr *vlan_eth_hdr(const struct sk_buff *skb) +{ + return (struct vlan_ethhdr *)skb->mac.raw; +} + +/* Wake-On-Lan options. */ +#define WAKE_PHY (1 << 0) +#define WAKE_UCAST (1 << 1) +#define WAKE_MCAST (1 << 2) +#define WAKE_BCAST (1 << 3) +#define WAKE_ARP (1 << 4) +#define WAKE_MAGIC (1 << 5) +#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ + +#define skb_header_pointer _kc_skb_header_pointer +static inline void *_kc_skb_header_pointer(const struct sk_buff *skb, + int offset, int len, void *buffer) +{ + int hlen = skb_headlen(skb); + + if (hlen - offset >= len) + return skb->data + offset; + +#ifdef MAX_SKB_FRAGS + if (skb_copy_bits(skb, offset, buffer, len) < 0) + return NULL; + + return buffer; +#else + return NULL; +#endif + +#ifndef NETDEV_TX_OK +#define NETDEV_TX_OK 0 +#endif +#ifndef NETDEV_TX_BUSY +#define NETDEV_TX_BUSY 1 +#endif +#ifndef NETDEV_TX_LOCKED +#define NETDEV_TX_LOCKED -1 +#endif +} + +#ifndef __bitwise +#define __bitwise +#endif +#endif /* < 2.6.9 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10) ) +#ifdef module_param_array_named +#undef module_param_array_named +#define module_param_array_named(name, array, type, nump, perm) \ + static struct kparam_array __param_arr_##name \ + = { ARRAY_SIZE(array), nump, param_set_##type, param_get_##type, \ + sizeof(array[0]), array }; \ + module_param_call(name, param_array_set, param_array_get, \ + &__param_arr_##name, perm) +#endif /* module_param_array_named */ +/* + * num_online is broken for all < 2.6.10 kernels. This is needed to support + * Node module parameter of ixgbe. + */ +#undef num_online_nodes +#define num_online_nodes(n) 1 +extern DECLARE_BITMAP(_kcompat_node_online_map, MAX_NUMNODES); +#undef node_online_map +#define node_online_map _kcompat_node_online_map +#endif /* < 2.6.10 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11) ) +#define PCI_D0 0 +#define PCI_D1 1 +#define PCI_D2 2 +#define PCI_D3hot 3 +#define PCI_D3cold 4 +typedef int pci_power_t; +#define pci_choose_state(pdev,state) state +#define PMSG_SUSPEND 3 +#define PCI_EXP_LNKCTL 16 + +#undef NETIF_F_LLTX + +#ifndef ARCH_HAS_PREFETCH +#define prefetch(X) +#endif + +#ifndef NET_IP_ALIGN +#define NET_IP_ALIGN 2 +#endif + +#define KC_USEC_PER_SEC 1000000L +#define usecs_to_jiffies _kc_usecs_to_jiffies +static inline unsigned int _kc_jiffies_to_usecs(const unsigned long j) +{ +#if HZ <= KC_USEC_PER_SEC && !(KC_USEC_PER_SEC % HZ) + return (KC_USEC_PER_SEC / HZ) * j; +#elif HZ > KC_USEC_PER_SEC && !(HZ % KC_USEC_PER_SEC) + return (j + (HZ / KC_USEC_PER_SEC) - 1)/(HZ / KC_USEC_PER_SEC); +#else + return (j * KC_USEC_PER_SEC) / HZ; +#endif +} +static inline unsigned long _kc_usecs_to_jiffies(const unsigned int m) +{ + if (m > _kc_jiffies_to_usecs(MAX_JIFFY_OFFSET)) + return MAX_JIFFY_OFFSET; +#if HZ <= KC_USEC_PER_SEC && !(KC_USEC_PER_SEC % HZ) + return (m + (KC_USEC_PER_SEC / HZ) - 1) / (KC_USEC_PER_SEC / HZ); +#elif HZ > KC_USEC_PER_SEC && !(HZ % KC_USEC_PER_SEC) + return m * (HZ / KC_USEC_PER_SEC); +#else + return (m * HZ + KC_USEC_PER_SEC - 1) / KC_USEC_PER_SEC; +#endif +} +#endif /* < 2.6.11 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,12) ) +#include <linux/reboot.h> +#define USE_REBOOT_NOTIFIER + +/* Generic MII registers. */ +#define MII_CTRL1000 0x09 /* 1000BASE-T control */ +#define MII_STAT1000 0x0a /* 1000BASE-T status */ +/* Advertisement control register. */ +#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ +#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymmetric pause */ +/* 1000BASE-T Control register */ +#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ +#ifndef is_zero_ether_addr +#define is_zero_ether_addr _kc_is_zero_ether_addr +static inline int _kc_is_zero_ether_addr(const u8 *addr) +{ + return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]); +} +#endif /* is_zero_ether_addr */ +#ifndef is_multicast_ether_addr +#define is_multicast_ether_addr _kc_is_multicast_ether_addr +static inline int _kc_is_multicast_ether_addr(const u8 *addr) +{ + return addr[0] & 0x01; +} +#endif /* is_multicast_ether_addr */ +#endif /* < 2.6.12 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,13) ) +#ifndef kstrdup +#define kstrdup _kc_kstrdup +extern char *_kc_kstrdup(const char *s, unsigned int gfp); +#endif +#endif /* < 2.6.13 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) ) +#define pm_message_t u32 +#ifndef kzalloc +#define kzalloc _kc_kzalloc +extern void *_kc_kzalloc(size_t size, int flags); +#endif + +/* Generic MII registers. */ +#define MII_ESTATUS 0x0f /* Extended Status */ +/* Basic mode status register. */ +#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ +/* Extended status register. */ +#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ +#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ + +#define ADVERTISED_Pause (1 << 13) +#define ADVERTISED_Asym_Pause (1 << 14) + +#if (!(RHEL_RELEASE_CODE && \ + (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,3)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0)))) +#if ((LINUX_VERSION_CODE == KERNEL_VERSION(2,6,9)) && !defined(gfp_t)) +#define gfp_t unsigned +#else +typedef unsigned gfp_t; +#endif +#endif /* !RHEL4.3->RHEL5.0 */ + +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,9) ) +#ifdef CONFIG_X86_64 +#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir) \ + dma_sync_single_for_cpu(dev, dma_handle, size, dir) +#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir) \ + dma_sync_single_for_device(dev, dma_handle, size, dir) +#endif +#endif +#endif /* < 2.6.14 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15) ) +#ifndef vmalloc_node +#define vmalloc_node(a,b) vmalloc(a) +#endif /* vmalloc_node*/ + +#define setup_timer(_timer, _function, _data) \ +do { \ + (_timer)->function = _function; \ + (_timer)->data = _data; \ + init_timer(_timer); \ +} while (0) +#ifndef device_can_wakeup +#define device_can_wakeup(dev) (1) +#endif +#ifndef device_set_wakeup_enable +#define device_set_wakeup_enable(dev, val) do{}while(0) +#endif +#ifndef device_init_wakeup +#define device_init_wakeup(dev,val) do {} while (0) +#endif +static inline unsigned _kc_compare_ether_addr(const u8 *addr1, const u8 *addr2) +{ + const u16 *a = (const u16 *) addr1; + const u16 *b = (const u16 *) addr2; + + return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0; +} +#undef compare_ether_addr +#define compare_ether_addr(addr1, addr2) _kc_compare_ether_addr(addr1, addr2) +#endif /* < 2.6.15 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16) ) +#undef DEFINE_MUTEX +#define DEFINE_MUTEX(x) DECLARE_MUTEX(x) +#define mutex_lock(x) down_interruptible(x) +#define mutex_unlock(x) up(x) + +#ifndef ____cacheline_internodealigned_in_smp +#ifdef CONFIG_SMP +#define ____cacheline_internodealigned_in_smp ____cacheline_aligned_in_smp +#else +#define ____cacheline_internodealigned_in_smp +#endif /* CONFIG_SMP */ +#endif /* ____cacheline_internodealigned_in_smp */ +#undef HAVE_PCI_ERS +#else /* 2.6.16 and above */ +#undef HAVE_PCI_ERS +#define HAVE_PCI_ERS +#endif /* < 2.6.16 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,17) ) +#ifndef first_online_node +#define first_online_node 0 +#endif +#ifndef NET_SKB_PAD +#define NET_SKB_PAD 16 +#endif +#endif /* < 2.6.17 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ) + +#ifndef IRQ_HANDLED +#define irqreturn_t void +#define IRQ_HANDLED +#define IRQ_NONE +#endif + +#ifndef IRQF_PROBE_SHARED +#ifdef SA_PROBEIRQ +#define IRQF_PROBE_SHARED SA_PROBEIRQ +#else +#define IRQF_PROBE_SHARED 0 +#endif +#endif + +#ifndef IRQF_SHARED +#define IRQF_SHARED SA_SHIRQ +#endif + +#ifndef ARRAY_SIZE +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) +#endif + +#ifndef FIELD_SIZEOF +#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) +#endif + +#ifndef skb_is_gso +#ifdef NETIF_F_TSO +#define skb_is_gso _kc_skb_is_gso +static inline int _kc_skb_is_gso(const struct sk_buff *skb) +{ + return skb_shinfo(skb)->gso_size; +} +#else +#define skb_is_gso(a) 0 +#endif +#endif + +#ifndef resource_size_t +#define resource_size_t unsigned long +#endif + +#ifdef skb_pad +#undef skb_pad +#endif +#define skb_pad(x,y) _kc_skb_pad(x, y) +int _kc_skb_pad(struct sk_buff *skb, int pad); +#ifdef skb_padto +#undef skb_padto +#endif +#define skb_padto(x,y) _kc_skb_padto(x, y) +static inline int _kc_skb_padto(struct sk_buff *skb, unsigned int len) +{ + unsigned int size = skb->len; + if(likely(size >= len)) + return 0; + return _kc_skb_pad(skb, len - size); +} + +#ifndef DECLARE_PCI_UNMAP_ADDR +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + u32 LEN_NAME +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) +#endif /* DECLARE_PCI_UNMAP_ADDR */ +#endif /* < 2.6.18 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) ) + +#ifndef DIV_ROUND_UP +#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) +#endif +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ) +#if (!((RHEL_RELEASE_CODE && \ + ((RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(4,4) && \ + RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0)) || \ + (RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,0)))) || \ + (AX_RELEASE_CODE && AX_RELEASE_CODE > AX_RELEASE_VERSION(3,0)))) +typedef irqreturn_t (*irq_handler_t)(int, void*, struct pt_regs *); +#endif +#if (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(6,0)) +#undef CONFIG_INET_LRO +#undef CONFIG_INET_LRO_MODULE +#undef CONFIG_FCOE +#undef CONFIG_FCOE_MODULE +#endif +typedef irqreturn_t (*new_handler_t)(int, void*); +static inline irqreturn_t _kc_request_irq(unsigned int irq, new_handler_t handler, unsigned long flags, const char *devname, void *dev_id) +#else /* 2.4.x */ +typedef void (*irq_handler_t)(int, void*, struct pt_regs *); +typedef void (*new_handler_t)(int, void*); +static inline int _kc_request_irq(unsigned int irq, new_handler_t handler, unsigned long flags, const char *devname, void *dev_id) +#endif /* >= 2.5.x */ +{ + irq_handler_t new_handler = (irq_handler_t) handler; + return request_irq(irq, new_handler, flags, devname, dev_id); +} + +#undef request_irq +#define request_irq(irq, handler, flags, devname, dev_id) _kc_request_irq((irq), (handler), (flags), (devname), (dev_id)) + +#define irq_handler_t new_handler_t +/* pci_restore_state and pci_save_state handles MSI/PCIE from 2.6.19 */ +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4))) +#define PCIE_CONFIG_SPACE_LEN 256 +#define PCI_CONFIG_SPACE_LEN 64 +#define PCIE_LINK_STATUS 0x12 +#define pci_config_space_ich8lan() do {} while(0) +#undef pci_save_state +extern int _kc_pci_save_state(struct pci_dev *); +#define pci_save_state(pdev) _kc_pci_save_state(pdev) +#undef pci_restore_state +extern void _kc_pci_restore_state(struct pci_dev *); +#define pci_restore_state(pdev) _kc_pci_restore_state(pdev) +#endif /* !(RHEL_RELEASE_CODE >= RHEL 5.4) */ + +#ifdef HAVE_PCI_ERS +#undef free_netdev +extern void _kc_free_netdev(struct net_device *); +#define free_netdev(netdev) _kc_free_netdev(netdev) +#endif +static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev) +{ + return 0; +} +#define pci_disable_pcie_error_reporting(dev) do {} while (0) +#define pci_cleanup_aer_uncorrect_error_status(dev) do {} while (0) + +extern void *_kc_kmemdup(const void *src, size_t len, unsigned gfp); +#define kmemdup(src, len, gfp) _kc_kmemdup(src, len, gfp) +#ifndef bool +#define bool _Bool +#define true 1 +#define false 0 +#endif +#else /* 2.6.19 */ +#include <linux/aer.h> +#include <linux/string.h> +#endif /* < 2.6.19 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ) +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,28) ) +#undef INIT_WORK +#define INIT_WORK(_work, _func) \ +do { \ + INIT_LIST_HEAD(&(_work)->entry); \ + (_work)->pending = 0; \ + (_work)->func = (void (*)(void *))_func; \ + (_work)->data = _work; \ + init_timer(&(_work)->timer); \ +} while (0) +#endif + +#ifndef PCI_VDEVICE +#define PCI_VDEVICE(ven, dev) \ + PCI_VENDOR_ID_##ven, (dev), \ + PCI_ANY_ID, PCI_ANY_ID, 0, 0 +#endif + +#ifndef round_jiffies +#define round_jiffies(x) x +#endif + +#define csum_offset csum + +#define HAVE_EARLY_VMALLOC_NODE +#define dev_to_node(dev) -1 +#undef set_dev_node +/* remove compiler warning with b=b, for unused variable */ +#define set_dev_node(a, b) do { (b) = (b); } while(0) + +#if (!(RHEL_RELEASE_CODE && \ + (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(4,7)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))) || \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,6)))) && \ + !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(10,2,0))) +typedef __u16 __bitwise __sum16; +typedef __u32 __bitwise __wsum; +#endif + +#if (!(RHEL_RELEASE_CODE && \ + (((RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(4,7)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(5,0))) || \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(5,4)))) && \ + !(SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(10,2,0))) +static inline __wsum csum_unfold(__sum16 n) +{ + return (__force __wsum)n; +} +#endif + +#else /* < 2.6.20 */ +#define HAVE_DEVICE_NUMA_NODE +#endif /* < 2.6.20 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) ) +#define to_net_dev(class) container_of(class, struct net_device, class_dev) +#define NETDEV_CLASS_DEV +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5))) +#define vlan_group_get_device(vg, id) (vg->vlan_devices[id]) +#define vlan_group_set_device(vg, id, dev) \ + do { \ + if (vg) vg->vlan_devices[id] = dev; \ + } while (0) +#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,5)) */ +#define pci_channel_offline(pdev) (pdev->error_state && \ + pdev->error_state != pci_channel_io_normal) +#define pci_request_selected_regions(pdev, bars, name) \ + pci_request_regions(pdev, name) +#define pci_release_selected_regions(pdev, bars) pci_release_regions(pdev); +#endif /* < 2.6.21 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ) +#define tcp_hdr(skb) (skb->h.th) +#define tcp_hdrlen(skb) (skb->h.th->doff << 2) +#define skb_transport_offset(skb) (skb->h.raw - skb->data) +#define skb_transport_header(skb) (skb->h.raw) +#define ipv6_hdr(skb) (skb->nh.ipv6h) +#define ip_hdr(skb) (skb->nh.iph) +#define skb_network_offset(skb) (skb->nh.raw - skb->data) +#define skb_network_header(skb) (skb->nh.raw) +#define skb_tail_pointer(skb) skb->tail +#define skb_reset_tail_pointer(skb) \ + do { \ + skb->tail = skb->data; \ + } while (0) +#define skb_copy_to_linear_data(skb, from, len) \ + memcpy(skb->data, from, len) +#define skb_copy_to_linear_data_offset(skb, offset, from, len) \ + memcpy(skb->data + offset, from, len) +#define skb_network_header_len(skb) (skb->h.raw - skb->nh.raw) +#define pci_register_driver pci_module_init +#define skb_mac_header(skb) skb->mac.raw + +#ifdef NETIF_F_MULTI_QUEUE +#ifndef alloc_etherdev_mq +#define alloc_etherdev_mq(_a, _b) alloc_etherdev(_a) +#endif +#endif /* NETIF_F_MULTI_QUEUE */ + +#ifndef ETH_FCS_LEN +#define ETH_FCS_LEN 4 +#endif +#define cancel_work_sync(x) flush_scheduled_work() +#ifndef udp_hdr +#define udp_hdr _udp_hdr +static inline struct udphdr *_udp_hdr(const struct sk_buff *skb) +{ + return (struct udphdr *)skb_transport_header(skb); +} +#endif + +#ifdef cpu_to_be16 +#undef cpu_to_be16 +#endif +#define cpu_to_be16(x) __constant_htons(x) + +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,1))) +enum { + DUMP_PREFIX_NONE, + DUMP_PREFIX_ADDRESS, + DUMP_PREFIX_OFFSET +}; +#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(5,1)) */ +#ifndef hex_asc +#define hex_asc(x) "0123456789abcdef"[x] +#endif +#include <linux/ctype.h> +extern void _kc_print_hex_dump(const char *level, const char *prefix_str, + int prefix_type, int rowsize, int groupsize, + const void *buf, size_t len, bool ascii); +#define print_hex_dump(lvl, s, t, r, g, b, l, a) \ + _kc_print_hex_dump(lvl, s, t, r, g, b, l, a) +#else /* 2.6.22 */ +#define ETH_TYPE_TRANS_SETS_DEV +#define HAVE_NETDEV_STATS_IN_NETDEV +#endif /* < 2.6.22 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,22) ) +#endif /* > 2.6.22 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) ) +#define netif_subqueue_stopped(_a, _b) 0 +#ifndef PTR_ALIGN +#define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a))) +#endif + +#ifndef CONFIG_PM_SLEEP +#define CONFIG_PM_SLEEP CONFIG_PM +#endif + +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,13) ) +#define HAVE_ETHTOOL_GET_PERM_ADDR +#endif /* 2.6.14 through 2.6.22 */ +#endif /* < 2.6.23 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ) +#ifndef ETH_FLAG_LRO +#define ETH_FLAG_LRO NETIF_F_LRO +#endif + +/* if GRO is supported then the napi struct must already exist */ +#ifndef NETIF_F_GRO +/* NAPI API changes in 2.6.24 break everything */ +struct napi_struct { + /* used to look up the real NAPI polling routine */ + int (*poll)(struct napi_struct *, int); + struct net_device *dev; + int weight; +}; +#endif + +#ifdef NAPI +extern int __kc_adapter_clean(struct net_device *, int *); +extern struct net_device *napi_to_poll_dev(struct napi_struct *napi); +#define netif_napi_add(_netdev, _napi, _poll, _weight) \ + do { \ + struct napi_struct *__napi = (_napi); \ + struct net_device *poll_dev = napi_to_poll_dev(__napi); \ + poll_dev->poll = &(__kc_adapter_clean); \ + poll_dev->priv = (_napi); \ + poll_dev->weight = (_weight); \ + set_bit(__LINK_STATE_RX_SCHED, &poll_dev->state); \ + set_bit(__LINK_STATE_START, &poll_dev->state);\ + dev_hold(poll_dev); \ + __napi->poll = &(_poll); \ + __napi->weight = (_weight); \ + __napi->dev = (_netdev); \ + } while (0) +#define netif_napi_del(_napi) \ + do { \ + struct net_device *poll_dev = napi_to_poll_dev(_napi); \ + WARN_ON(!test_bit(__LINK_STATE_RX_SCHED, &poll_dev->state)); \ + dev_put(poll_dev); \ + memset(poll_dev, 0, sizeof(struct net_device));\ + } while (0) +#define napi_schedule_prep(_napi) \ + (netif_running((_napi)->dev) && netif_rx_schedule_prep(napi_to_poll_dev(_napi))) +#define napi_schedule(_napi) \ + do { \ + if (napi_schedule_prep(_napi)) \ + __netif_rx_schedule(napi_to_poll_dev(_napi)); \ + } while (0) +#define napi_enable(_napi) netif_poll_enable(napi_to_poll_dev(_napi)) +#define napi_disable(_napi) netif_poll_disable(napi_to_poll_dev(_napi)) +#define __napi_schedule(_napi) __netif_rx_schedule(napi_to_poll_dev(_napi)) +#ifndef NETIF_F_GRO +#define napi_complete(_napi) netif_rx_complete(napi_to_poll_dev(_napi)) +#else +#define napi_complete(_napi) \ + do { \ + napi_gro_flush(_napi); \ + netif_rx_complete(napi_to_poll_dev(_napi)); \ + } while (0) +#endif /* NETIF_F_GRO */ +#else /* NAPI */ +#define netif_napi_add(_netdev, _napi, _poll, _weight) \ + do { \ + struct napi_struct *__napi = _napi; \ + _netdev->poll = &(_poll); \ + _netdev->weight = (_weight); \ + __napi->poll = &(_poll); \ + __napi->weight = (_weight); \ + __napi->dev = (_netdev); \ + } while (0) +#define netif_napi_del(_a) do {} while (0) +#endif /* NAPI */ + +#undef dev_get_by_name +#define dev_get_by_name(_a, _b) dev_get_by_name(_b) +#define __netif_subqueue_stopped(_a, _b) netif_subqueue_stopped(_a, _b) +#ifndef DMA_BIT_MASK +#define DMA_BIT_MASK(n) (((n) == 64) ? DMA_64BIT_MASK : ((1ULL<<(n))-1)) +#endif + +#ifdef NETIF_F_TSO6 +#define skb_is_gso_v6 _kc_skb_is_gso_v6 +static inline int _kc_skb_is_gso_v6(const struct sk_buff *skb) +{ + return skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6; +} +#endif /* NETIF_F_TSO6 */ + +#ifndef KERN_CONT +#define KERN_CONT "" +#endif +#else /* < 2.6.24 */ +#define HAVE_ETHTOOL_GET_SSET_COUNT +#define HAVE_NETDEV_NAPI_LIST +#endif /* < 2.6.24 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,24) ) +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) ) +#include <linux/pm_qos_params.h> +#else /* >= 3.2.0 */ +#include <linux/pm_qos.h> +#endif /* else >= 3.2.0 */ +#endif /* > 2.6.24 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,25) ) +#define PM_QOS_CPU_DMA_LATENCY 1 + +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,6,18) ) +#include <linux/latency.h> +#define PM_QOS_DEFAULT_VALUE INFINITE_LATENCY +#define pm_qos_add_requirement(pm_qos_class, name, value) \ + set_acceptable_latency(name, value) +#define pm_qos_remove_requirement(pm_qos_class, name) \ + remove_acceptable_latency(name) +#define pm_qos_update_requirement(pm_qos_class, name, value) \ + modify_acceptable_latency(name, value) +#else +#define PM_QOS_DEFAULT_VALUE -1 +#define pm_qos_add_requirement(pm_qos_class, name, value) +#define pm_qos_remove_requirement(pm_qos_class, name) +#define pm_qos_update_requirement(pm_qos_class, name, value) { \ + if (value != PM_QOS_DEFAULT_VALUE) { \ + printk(KERN_WARNING "%s: unable to set PM QoS requirement\n", \ + pci_name(adapter->pdev)); \ + } \ +} + +#endif /* > 2.6.18 */ + +#define pci_enable_device_mem(pdev) pci_enable_device(pdev) + +#ifndef DEFINE_PCI_DEVICE_TABLE +#define DEFINE_PCI_DEVICE_TABLE(_table) struct pci_device_id _table[] +#endif /* DEFINE_PCI_DEVICE_TABLE */ + +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ) +#ifndef IXGBE_PROCFS +#define IXGBE_PROCFS +#endif /* IXGBE_PROCFS */ +#endif /* >= 2.6.0 */ + + +#else /* < 2.6.25 */ + +#ifndef IXGBE_SYSFS +#define IXGBE_SYSFS +#endif /* IXGBE_SYSFS */ + + +#endif /* < 2.6.25 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26) ) +#ifndef clamp_t +#define clamp_t(type, val, min, max) ({ \ + type __val = (val); \ + type __min = (min); \ + type __max = (max); \ + __val = __val < __min ? __min : __val; \ + __val > __max ? __max : __val; }) +#endif /* clamp_t */ +#ifdef NETIF_F_TSO +#ifdef NETIF_F_TSO6 +#define netif_set_gso_max_size(_netdev, size) \ + do { \ + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { \ + _netdev->features &= ~NETIF_F_TSO; \ + _netdev->features &= ~NETIF_F_TSO6; \ + } else { \ + _netdev->features |= NETIF_F_TSO; \ + _netdev->features |= NETIF_F_TSO6; \ + } \ + } while (0) +#else /* NETIF_F_TSO6 */ +#define netif_set_gso_max_size(_netdev, size) \ + do { \ + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) \ + _netdev->features &= ~NETIF_F_TSO; \ + else \ + _netdev->features |= NETIF_F_TSO; \ + } while (0) +#endif /* NETIF_F_TSO6 */ +#else +#define netif_set_gso_max_size(_netdev, size) do {} while (0) +#endif /* NETIF_F_TSO */ +#undef kzalloc_node +#define kzalloc_node(_size, _flags, _node) kzalloc(_size, _flags) + +extern void _kc_pci_disable_link_state(struct pci_dev *dev, int state); +#define pci_disable_link_state(p, s) _kc_pci_disable_link_state(p, s) +#else /* < 2.6.26 */ +#include <linux/pci-aspm.h> +#define HAVE_NETDEV_VLAN_FEATURES +#endif /* < 2.6.26 */ +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,27) ) +static inline void _kc_ethtool_cmd_speed_set(struct ethtool_cmd *ep, + __u32 speed) +{ + ep->speed = (__u16)speed; + /* ep->speed_hi = (__u16)(speed >> 16); */ +} +#define ethtool_cmd_speed_set _kc_ethtool_cmd_speed_set + +static inline __u32 _kc_ethtool_cmd_speed(struct ethtool_cmd *ep) +{ + /* no speed_hi before 2.6.27, and probably no need for it yet */ + return (__u32)ep->speed; +} +#define ethtool_cmd_speed _kc_ethtool_cmd_speed + +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15) ) +#if ((LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23)) && defined(CONFIG_PM)) +#define ANCIENT_PM 1 +#elif ((LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)) && \ + (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,26)) && \ + defined(CONFIG_PM_SLEEP)) +#define NEWER_PM 1 +#endif +#if defined(ANCIENT_PM) || defined(NEWER_PM) +#undef device_set_wakeup_enable +#define device_set_wakeup_enable(dev, val) \ + do { \ + u16 pmc = 0; \ + int pm = pci_find_capability(adapter->pdev, PCI_CAP_ID_PM); \ + if (pm) { \ + pci_read_config_word(adapter->pdev, pm + PCI_PM_PMC, \ + &pmc); \ + } \ + (dev)->power.can_wakeup = !!(pmc >> 11); \ + (dev)->power.should_wakeup = (val && (pmc >> 11)); \ + } while (0) +#endif /* 2.6.15-2.6.22 and CONFIG_PM or 2.6.23-2.6.25 and CONFIG_PM_SLEEP */ +#endif /* 2.6.15 through 2.6.27 */ +#ifndef netif_napi_del +#define netif_napi_del(_a) do {} while (0) +#ifdef NAPI +#ifdef CONFIG_NETPOLL +#undef netif_napi_del +#define netif_napi_del(_a) list_del(&(_a)->dev_list); +#endif +#endif +#endif /* netif_napi_del */ +#ifdef dma_mapping_error +#undef dma_mapping_error +#endif +#define dma_mapping_error(dev, dma_addr) pci_dma_mapping_error(dma_addr) + +#ifdef CONFIG_NETDEVICES_MULTIQUEUE +#define HAVE_TX_MQ +#endif + +#ifdef HAVE_TX_MQ +extern void _kc_netif_tx_stop_all_queues(struct net_device *); +extern void _kc_netif_tx_wake_all_queues(struct net_device *); +extern void _kc_netif_tx_start_all_queues(struct net_device *); +#define netif_tx_stop_all_queues(a) _kc_netif_tx_stop_all_queues(a) +#define netif_tx_wake_all_queues(a) _kc_netif_tx_wake_all_queues(a) +#define netif_tx_start_all_queues(a) _kc_netif_tx_start_all_queues(a) +#undef netif_stop_subqueue +#define netif_stop_subqueue(_ndev,_qi) do { \ + if (netif_is_multiqueue((_ndev))) \ + netif_stop_subqueue((_ndev), (_qi)); \ + else \ + netif_stop_queue((_ndev)); \ + } while (0) +#undef netif_start_subqueue +#define netif_start_subqueue(_ndev,_qi) do { \ + if (netif_is_multiqueue((_ndev))) \ + netif_start_subqueue((_ndev), (_qi)); \ + else \ + netif_start_queue((_ndev)); \ + } while (0) +#else /* HAVE_TX_MQ */ +#define netif_tx_stop_all_queues(a) netif_stop_queue(a) +#define netif_tx_wake_all_queues(a) netif_wake_queue(a) +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12) ) +#define netif_tx_start_all_queues(a) netif_start_queue(a) +#else +#define netif_tx_start_all_queues(a) do {} while (0) +#endif +#define netif_stop_subqueue(_ndev,_qi) netif_stop_queue((_ndev)) +#define netif_start_subqueue(_ndev,_qi) netif_start_queue((_ndev)) +#endif /* HAVE_TX_MQ */ +#ifndef NETIF_F_MULTI_QUEUE +#define NETIF_F_MULTI_QUEUE 0 +#define netif_is_multiqueue(a) 0 +#define netif_wake_subqueue(a, b) +#endif /* NETIF_F_MULTI_QUEUE */ + +#ifndef __WARN_printf +extern void __kc_warn_slowpath(const char *file, const int line, + const char *fmt, ...) __attribute__((format(printf, 3, 4))); +#define __WARN_printf(arg...) __kc_warn_slowpath(__FILE__, __LINE__, arg) +#endif /* __WARN_printf */ + +#ifndef WARN +#define WARN(condition, format...) ({ \ + int __ret_warn_on = !!(condition); \ + if (unlikely(__ret_warn_on)) \ + __WARN_printf(format); \ + unlikely(__ret_warn_on); \ +}) +#endif /* WARN */ +#else /* < 2.6.27 */ +#define HAVE_TX_MQ +#define HAVE_NETDEV_SELECT_QUEUE +#endif /* < 2.6.27 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) ) +#define pci_ioremap_bar(pdev, bar) ioremap(pci_resource_start(pdev, bar), \ + pci_resource_len(pdev, bar)) +#define pci_wake_from_d3 _kc_pci_wake_from_d3 +#define pci_prepare_to_sleep _kc_pci_prepare_to_sleep +extern int _kc_pci_wake_from_d3(struct pci_dev *dev, bool enable); +extern int _kc_pci_prepare_to_sleep(struct pci_dev *dev); +#define netdev_alloc_page(a) alloc_page(GFP_ATOMIC) +#ifndef __skb_queue_head_init +static inline void __kc_skb_queue_head_init(struct sk_buff_head *list) +{ + list->prev = list->next = (struct sk_buff *)list; + list->qlen = 0; +} +#define __skb_queue_head_init(_q) __kc_skb_queue_head_init(_q) +#endif +#endif /* < 2.6.28 */ + +#ifndef skb_add_rx_frag +#define skb_add_rx_frag _kc_skb_add_rx_frag +extern void _kc_skb_add_rx_frag(struct sk_buff *, int, struct page *, int, int); +#endif + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29) ) +#ifndef swap +#define swap(a, b) \ + do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0) +#endif +#define pci_request_selected_regions_exclusive(pdev, bars, name) \ + pci_request_selected_regions(pdev, bars, name) +#ifndef CONFIG_NR_CPUS +#define CONFIG_NR_CPUS 1 +#endif /* CONFIG_NR_CPUS */ +#ifndef pcie_aspm_enabled +#define pcie_aspm_enabled() (1) +#endif /* pcie_aspm_enabled */ +#else /* < 2.6.29 */ +#ifndef HAVE_NET_DEVICE_OPS +#define HAVE_NET_DEVICE_OPS +#endif +#ifdef CONFIG_DCB +#define HAVE_PFC_MODE_ENABLE +#endif /* CONFIG_DCB */ +#endif /* < 2.6.29 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ) +#define skb_rx_queue_recorded(a) false +#define skb_get_rx_queue(a) 0 +#undef CONFIG_FCOE +#undef CONFIG_FCOE_MODULE +extern u16 _kc_skb_tx_hash(struct net_device *dev, struct sk_buff *skb); +#define skb_tx_hash(n, s) _kc_skb_tx_hash(n, s) +#define skb_record_rx_queue(a, b) do {} while (0) +#ifndef CONFIG_PCI_IOV +#undef pci_enable_sriov +#define pci_enable_sriov(a, b) -ENOTSUPP +#undef pci_disable_sriov +#define pci_disable_sriov(a) do {} while (0) +#endif /* CONFIG_PCI_IOV */ +#ifndef pr_cont +#define pr_cont(fmt, ...) \ + printk(KERN_CONT fmt, ##__VA_ARGS__) +#endif /* pr_cont */ +#else +#define HAVE_ASPM_QUIRKS +#endif /* < 2.6.30 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,31) ) +#define ETH_P_1588 0x88F7 +#define ETH_P_FIP 0x8914 +#ifndef netdev_uc_count +#define netdev_uc_count(dev) ((dev)->uc_count) +#endif +#ifndef netdev_for_each_uc_addr +#define netdev_for_each_uc_addr(uclist, dev) \ + for (uclist = dev->uc_list; uclist; uclist = uclist->next) +#endif +#else +#ifndef HAVE_NETDEV_STORAGE_ADDRESS +#define HAVE_NETDEV_STORAGE_ADDRESS +#endif +#ifndef HAVE_NETDEV_HW_ADDR +#define HAVE_NETDEV_HW_ADDR +#endif +#ifndef HAVE_TRANS_START_IN_QUEUE +#define HAVE_TRANS_START_IN_QUEUE +#endif +#endif /* < 2.6.31 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32) ) +#undef netdev_tx_t +#define netdev_tx_t int +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef NETIF_F_FCOE_MTU +#define NETIF_F_FCOE_MTU (1 << 26) +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ + +#ifndef pm_runtime_get_sync +#define pm_runtime_get_sync(dev) do {} while (0) +#endif +#ifndef pm_runtime_put +#define pm_runtime_put(dev) do {} while (0) +#endif +#ifndef pm_runtime_put_sync +#define pm_runtime_put_sync(dev) do {} while (0) +#endif +#ifndef pm_runtime_resume +#define pm_runtime_resume(dev) do {} while (0) +#endif +#ifndef pm_schedule_suspend +#define pm_schedule_suspend(dev, t) do {} while (0) +#endif +#ifndef pm_runtime_set_suspended +#define pm_runtime_set_suspended(dev) do {} while (0) +#endif +#ifndef pm_runtime_disable +#define pm_runtime_disable(dev) do {} while (0) +#endif +#ifndef pm_runtime_put_noidle +#define pm_runtime_put_noidle(dev) do {} while (0) +#endif +#ifndef pm_runtime_set_active +#define pm_runtime_set_active(dev) do {} while (0) +#endif +#ifndef pm_runtime_enable +#define pm_runtime_enable(dev) do {} while (0) +#endif +#ifndef pm_runtime_get_noresume +#define pm_runtime_get_noresume(dev) do {} while (0) +#endif +#else /* < 2.6.32 */ +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef HAVE_NETDEV_OPS_FCOE_ENABLE +#define HAVE_NETDEV_OPS_FCOE_ENABLE +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ +#ifdef CONFIG_DCB +#ifndef HAVE_DCBNL_OPS_GETAPP +#define HAVE_DCBNL_OPS_GETAPP +#endif +#endif /* CONFIG_DCB */ +#include <linux/pm_runtime.h> +/* IOV bad DMA target work arounds require at least this kernel rev support */ +#define HAVE_PCIE_TYPE +#endif /* < 2.6.32 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33) ) +#ifndef pci_pcie_cap +#define pci_pcie_cap(pdev) pci_find_capability(pdev, PCI_CAP_ID_EXP) +#endif +#ifndef IPV4_FLOW +#define IPV4_FLOW 0x10 +#endif /* IPV4_FLOW */ +#ifndef IPV6_FLOW +#define IPV6_FLOW 0x11 +#endif /* IPV6_FLOW */ +/* Features back-ported to RHEL6 or SLES11 SP1 after 2.6.32 */ +#if ( (RHEL_RELEASE_CODE && RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,0)) || \ + (SLE_VERSION_CODE && SLE_VERSION_CODE >= SLE_VERSION(11,1,0)) ) +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef HAVE_NETDEV_OPS_FCOE_GETWWN +#define HAVE_NETDEV_OPS_FCOE_GETWWN +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ +#endif /* RHEL6 or SLES11 SP1 */ +#ifndef __percpu +#define __percpu +#endif /* __percpu */ +#else /* < 2.6.33 */ +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef HAVE_NETDEV_OPS_FCOE_GETWWN +#define HAVE_NETDEV_OPS_FCOE_GETWWN +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ +#define HAVE_ETHTOOL_SFP_DISPLAY_PORT +#endif /* < 2.6.33 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34) ) +#ifndef ETH_FLAG_NTUPLE +#define ETH_FLAG_NTUPLE NETIF_F_NTUPLE +#endif + +#ifndef netdev_mc_count +#define netdev_mc_count(dev) ((dev)->mc_count) +#endif +#ifndef netdev_mc_empty +#define netdev_mc_empty(dev) (netdev_mc_count(dev) == 0) +#endif +#ifndef netdev_for_each_mc_addr +#define netdev_for_each_mc_addr(mclist, dev) \ + for (mclist = dev->mc_list; mclist; mclist = mclist->next) +#endif +#ifndef netdev_uc_count +#define netdev_uc_count(dev) ((dev)->uc.count) +#endif +#ifndef netdev_uc_empty +#define netdev_uc_empty(dev) (netdev_uc_count(dev) == 0) +#endif +#ifndef netdev_for_each_uc_addr +#define netdev_for_each_uc_addr(ha, dev) \ + list_for_each_entry(ha, &dev->uc.list, list) +#endif +#ifndef dma_set_coherent_mask +#define dma_set_coherent_mask(dev,mask) \ + pci_set_consistent_dma_mask(to_pci_dev(dev),(mask)) +#endif +#ifndef pci_dev_run_wake +#define pci_dev_run_wake(pdev) (0) +#endif + +/* netdev logging taken from include/linux/netdevice.h */ +#ifndef netdev_name +static inline const char *_kc_netdev_name(const struct net_device *dev) +{ + if (dev->reg_state != NETREG_REGISTERED) + return "(unregistered net_device)"; + return dev->name; +} +#define netdev_name(netdev) _kc_netdev_name(netdev) +#endif /* netdev_name */ + +#undef netdev_printk +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) ) +#define netdev_printk(level, netdev, format, args...) \ +do { \ + struct adapter_struct *kc_adapter = netdev_priv(netdev);\ + struct pci_dev *pdev = kc_adapter->pdev; \ + printk("%s %s: " format, level, pci_name(pdev), \ + ##args); \ +} while(0) +#elif ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,21) ) +#define netdev_printk(level, netdev, format, args...) \ +do { \ + struct adapter_struct *kc_adapter = netdev_priv(netdev);\ + struct pci_dev *pdev = kc_adapter->pdev; \ + struct device *dev = pci_dev_to_dev(pdev); \ + dev_printk(level, dev, "%s: " format, \ + netdev_name(netdev), ##args); \ +} while(0) +#else /* 2.6.21 => 2.6.34 */ +#define netdev_printk(level, netdev, format, args...) \ + dev_printk(level, (netdev)->dev.parent, \ + "%s: " format, \ + netdev_name(netdev), ##args) +#endif /* <2.6.0 <2.6.21 <2.6.34 */ +#undef netdev_emerg +#define netdev_emerg(dev, format, args...) \ + netdev_printk(KERN_EMERG, dev, format, ##args) +#undef netdev_alert +#define netdev_alert(dev, format, args...) \ + netdev_printk(KERN_ALERT, dev, format, ##args) +#undef netdev_crit +#define netdev_crit(dev, format, args...) \ + netdev_printk(KERN_CRIT, dev, format, ##args) +#undef netdev_err +#define netdev_err(dev, format, args...) \ + netdev_printk(KERN_ERR, dev, format, ##args) +#undef netdev_warn +#define netdev_warn(dev, format, args...) \ + netdev_printk(KERN_WARNING, dev, format, ##args) +#undef netdev_notice +#define netdev_notice(dev, format, args...) \ + netdev_printk(KERN_NOTICE, dev, format, ##args) +#undef netdev_info +#define netdev_info(dev, format, args...) \ + netdev_printk(KERN_INFO, dev, format, ##args) +#undef netdev_dbg +#if defined(DEBUG) +#define netdev_dbg(__dev, format, args...) \ + netdev_printk(KERN_DEBUG, __dev, format, ##args) +#elif defined(CONFIG_DYNAMIC_DEBUG) +#define netdev_dbg(__dev, format, args...) \ +do { \ + dynamic_dev_dbg((__dev)->dev.parent, "%s: " format, \ + netdev_name(__dev), ##args); \ +} while (0) +#else /* DEBUG */ +#define netdev_dbg(__dev, format, args...) \ +({ \ + if (0) \ + netdev_printk(KERN_DEBUG, __dev, format, ##args); \ + 0; \ +}) +#endif /* DEBUG */ + +#undef netif_printk +#define netif_printk(priv, type, level, dev, fmt, args...) \ +do { \ + if (netif_msg_##type(priv)) \ + netdev_printk(level, (dev), fmt, ##args); \ +} while (0) + +#undef netif_emerg +#define netif_emerg(priv, type, dev, fmt, args...) \ + netif_level(emerg, priv, type, dev, fmt, ##args) +#undef netif_alert +#define netif_alert(priv, type, dev, fmt, args...) \ + netif_level(alert, priv, type, dev, fmt, ##args) +#undef netif_crit +#define netif_crit(priv, type, dev, fmt, args...) \ + netif_level(crit, priv, type, dev, fmt, ##args) +#undef netif_err +#define netif_err(priv, type, dev, fmt, args...) \ + netif_level(err, priv, type, dev, fmt, ##args) +#undef netif_warn +#define netif_warn(priv, type, dev, fmt, args...) \ + netif_level(warn, priv, type, dev, fmt, ##args) +#undef netif_notice +#define netif_notice(priv, type, dev, fmt, args...) \ + netif_level(notice, priv, type, dev, fmt, ##args) +#undef netif_info +#define netif_info(priv, type, dev, fmt, args...) \ + netif_level(info, priv, type, dev, fmt, ##args) + +#ifdef SET_SYSTEM_SLEEP_PM_OPS +#define HAVE_SYSTEM_SLEEP_PM_OPS +#endif + +#ifndef for_each_set_bit +#define for_each_set_bit(bit, addr, size) \ + for ((bit) = find_first_bit((addr), (size)); \ + (bit) < (size); \ + (bit) = find_next_bit((addr), (size), (bit) + 1)) +#endif /* for_each_set_bit */ + +#ifndef DEFINE_DMA_UNMAP_ADDR +#define DEFINE_DMA_UNMAP_ADDR DECLARE_PCI_UNMAP_ADDR +#define DEFINE_DMA_UNMAP_LEN DECLARE_PCI_UNMAP_LEN +#define dma_unmap_addr pci_unmap_addr +#define dma_unmap_addr_set pci_unmap_addr_set +#define dma_unmap_len pci_unmap_len +#define dma_unmap_len_set pci_unmap_len_set +#endif /* DEFINE_DMA_UNMAP_ADDR */ +#else /* < 2.6.34 */ +#define HAVE_SYSTEM_SLEEP_PM_OPS +#ifndef HAVE_SET_RX_MODE +#define HAVE_SET_RX_MODE +#endif + +#endif /* < 2.6.34 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) ) +#ifndef numa_node_id +#define numa_node_id() 0 +#endif +#ifdef HAVE_TX_MQ +#include <net/sch_generic.h> +#ifndef CONFIG_NETDEVICES_MULTIQUEUE +void _kc_netif_set_real_num_tx_queues(struct net_device *, unsigned int); +#define netif_set_real_num_tx_queues _kc_netif_set_real_num_tx_queues +#else /* CONFIG_NETDEVICES_MULTI_QUEUE */ +#define netif_set_real_num_tx_queues(_netdev, _count) \ + do { \ + (_netdev)->egress_subqueue_count = _count; \ + } while (0) +#endif /* CONFIG_NETDEVICES_MULTI_QUEUE */ +#else +#define netif_set_real_num_tx_queues(_netdev, _count) do {} while(0) +#endif /* HAVE_TX_MQ */ +#ifndef ETH_FLAG_RXHASH +#define ETH_FLAG_RXHASH (1<<28) +#endif /* ETH_FLAG_RXHASH */ +#else /* < 2.6.35 */ +#define HAVE_PM_QOS_REQUEST_LIST +#define HAVE_IRQ_AFFINITY_HINT +#endif /* < 2.6.35 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36) ) +extern int _kc_ethtool_op_set_flags(struct net_device *, u32, u32); +#define ethtool_op_set_flags _kc_ethtool_op_set_flags +extern u32 _kc_ethtool_op_get_flags(struct net_device *); +#define ethtool_op_get_flags _kc_ethtool_op_get_flags + +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS +#ifdef NET_IP_ALIGN +#undef NET_IP_ALIGN +#endif +#define NET_IP_ALIGN 0 +#endif /* CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS */ + +#ifdef NET_SKB_PAD +#undef NET_SKB_PAD +#endif + +#if (L1_CACHE_BYTES > 32) +#define NET_SKB_PAD L1_CACHE_BYTES +#else +#define NET_SKB_PAD 32 +#endif + +static inline struct sk_buff *_kc_netdev_alloc_skb_ip_align(struct net_device *dev, + unsigned int length) +{ + struct sk_buff *skb; + + skb = alloc_skb(length + NET_SKB_PAD + NET_IP_ALIGN, GFP_ATOMIC); + if (skb) { +#if (NET_IP_ALIGN + NET_SKB_PAD) + skb_reserve(skb, NET_IP_ALIGN + NET_SKB_PAD); +#endif + skb->dev = dev; + } + return skb; +} + +#ifdef netdev_alloc_skb_ip_align +#undef netdev_alloc_skb_ip_align +#endif +#define netdev_alloc_skb_ip_align(n, l) _kc_netdev_alloc_skb_ip_align(n, l) + +#undef netif_level +#define netif_level(level, priv, type, dev, fmt, args...) \ +do { \ + if (netif_msg_##type(priv)) \ + netdev_##level(dev, fmt, ##args); \ +} while (0) + +#undef usleep_range +#define usleep_range(min, max) msleep(DIV_ROUND_UP(min, 1000)) + +#else /* < 2.6.36 */ +#define HAVE_PM_QOS_REQUEST_ACTIVE +#define HAVE_8021P_SUPPORT +#define HAVE_NDO_GET_STATS64 +#endif /* < 2.6.36 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,37) ) +#ifndef ETHTOOL_RXNTUPLE_ACTION_CLEAR +#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) +#endif +#ifndef VLAN_N_VID +#define VLAN_N_VID VLAN_GROUP_ARRAY_LEN +#endif /* VLAN_N_VID */ +#ifndef ETH_FLAG_TXVLAN +#define ETH_FLAG_TXVLAN (1 << 7) +#endif /* ETH_FLAG_TXVLAN */ +#ifndef ETH_FLAG_RXVLAN +#define ETH_FLAG_RXVLAN (1 << 8) +#endif /* ETH_FLAG_RXVLAN */ + +static inline void _kc_skb_checksum_none_assert(struct sk_buff *skb) +{ + WARN_ON(skb->ip_summed != CHECKSUM_NONE); +} +#define skb_checksum_none_assert(skb) _kc_skb_checksum_none_assert(skb) + +static inline void *_kc_vzalloc_node(unsigned long size, int node) +{ + void *addr = vmalloc_node(size, node); + if (addr) + memset(addr, 0, size); + return addr; +} +#define vzalloc_node(_size, _node) _kc_vzalloc_node(_size, _node) + +static inline void *_kc_vzalloc(unsigned long size) +{ + void *addr = vmalloc(size); + if (addr) + memset(addr, 0, size); + return addr; +} +#define vzalloc(_size) _kc_vzalloc(_size) + +#ifndef vlan_get_protocol +static inline __be16 __kc_vlan_get_protocol(const struct sk_buff *skb) +{ + if (vlan_tx_tag_present(skb) || + skb->protocol != cpu_to_be16(ETH_P_8021Q)) + return skb->protocol; + + if (skb_headlen(skb) < sizeof(struct vlan_ethhdr)) + return 0; + + return ((struct vlan_ethhdr*)skb->data)->h_vlan_encapsulated_proto; +} +#define vlan_get_protocol(_skb) __kc_vlan_get_protocol(_skb) +#endif +#ifdef HAVE_HW_TIME_STAMP +#define SKBTX_HW_TSTAMP (1 << 0) +#define SKBTX_IN_PROGRESS (1 << 2) +#define SKB_SHARED_TX_IS_UNION +#endif +#if ( LINUX_VERSION_CODE > KERNEL_VERSION(2,4,18) ) +#ifndef HAVE_VLAN_RX_REGISTER +#define HAVE_VLAN_RX_REGISTER +#endif +#endif /* > 2.4.18 */ +#endif /* < 2.6.37 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,38) ) +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,22) ) +#define skb_checksum_start_offset(skb) skb_transport_offset(skb) +#else /* 2.6.22 -> 2.6.37 */ +static inline int _kc_skb_checksum_start_offset(const struct sk_buff *skb) +{ + return skb->csum_start - skb_headroom(skb); +} +#define skb_checksum_start_offset(skb) _kc_skb_checksum_start_offset(skb) +#endif /* 2.6.22 -> 2.6.37 */ +#ifdef CONFIG_DCB +#ifndef IEEE_8021QAZ_MAX_TCS +#define IEEE_8021QAZ_MAX_TCS 8 +#endif +#ifndef DCB_CAP_DCBX_HOST +#define DCB_CAP_DCBX_HOST 0x01 +#endif +#ifndef DCB_CAP_DCBX_LLD_MANAGED +#define DCB_CAP_DCBX_LLD_MANAGED 0x02 +#endif +#ifndef DCB_CAP_DCBX_VER_CEE +#define DCB_CAP_DCBX_VER_CEE 0x04 +#endif +#ifndef DCB_CAP_DCBX_VER_IEEE +#define DCB_CAP_DCBX_VER_IEEE 0x08 +#endif +#ifndef DCB_CAP_DCBX_STATIC +#define DCB_CAP_DCBX_STATIC 0x10 +#endif +#endif /* CONFIG_DCB */ +#else /* < 2.6.38 */ +#endif /* < 2.6.38 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39) ) +#ifndef skb_queue_reverse_walk_safe +#define skb_queue_reverse_walk_safe(queue, skb, tmp) \ + for (skb = (queue)->prev, tmp = skb->prev; \ + skb != (struct sk_buff *)(queue); \ + skb = tmp, tmp = skb->prev) +#endif +#if (!(RHEL_RELEASE_CODE && RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(6,0))) +extern u8 _kc_netdev_get_num_tc(struct net_device *dev); +#define netdev_get_num_tc(dev) _kc_netdev_get_num_tc(dev) +extern u8 _kc_netdev_get_prio_tc_map(struct net_device *dev, u8 up); +#define netdev_get_prio_tc_map(dev, up) _kc_netdev_get_prio_tc_map(dev, up) +#define netdev_set_prio_tc_map(dev, up, tc) do {} while (0) +#else /* RHEL6.1 or greater */ +#ifndef HAVE_MQPRIO +#define HAVE_MQPRIO +#endif /* HAVE_MQPRIO */ +#ifdef CONFIG_DCB +#ifndef HAVE_DCBNL_IEEE +#define HAVE_DCBNL_IEEE +#ifndef IEEE_8021QAZ_TSA_STRICT +#define IEEE_8021QAZ_TSA_STRICT 0 +#endif +#ifndef IEEE_8021QAZ_TSA_ETS +#define IEEE_8021QAZ_TSA_ETS 2 +#endif +#ifndef IEEE_8021QAZ_APP_SEL_ETHERTYPE +#define IEEE_8021QAZ_APP_SEL_ETHERTYPE 1 +#endif +#endif +#endif /* CONFIG_DCB */ +#endif /* !(RHEL_RELEASE_CODE > RHEL_RELEASE_VERSION(6,0)) */ +#else /* < 2.6.39 */ +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#ifndef HAVE_NETDEV_OPS_FCOE_DDP_TARGET +#define HAVE_NETDEV_OPS_FCOE_DDP_TARGET +#endif +#endif /* CONFIG_FCOE || CONFIG_FCOE_MODULE */ +#ifndef HAVE_MQPRIO +#define HAVE_MQPRIO +#endif +#ifndef HAVE_SETUP_TC +#define HAVE_SETUP_TC +#endif +#ifdef CONFIG_DCB +#ifndef HAVE_DCBNL_IEEE +#define HAVE_DCBNL_IEEE +#endif +#endif /* CONFIG_DCB */ +#ifndef HAVE_NDO_SET_FEATURES +#define HAVE_NDO_SET_FEATURES +#endif +#endif /* < 2.6.39 */ + +/*****************************************************************************/ +/* use < 2.6.40 because of a Fedora 15 kernel update where they + * updated the kernel version to 2.6.40.x and they back-ported 3.0 features + * like set_phys_id for ethtool. + */ +#undef ETHTOOL_GRXRINGS +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,40) ) +#ifdef ETHTOOL_GRXRINGS +#ifndef FLOW_EXT +#define FLOW_EXT 0x80000000 +union _kc_ethtool_flow_union { + struct ethtool_tcpip4_spec tcp_ip4_spec; + struct ethtool_usrip4_spec usr_ip4_spec; + __u8 hdata[60]; +}; +struct _kc_ethtool_flow_ext { + __be16 vlan_etype; + __be16 vlan_tci; + __be32 data[2]; +}; +struct _kc_ethtool_rx_flow_spec { + __u32 flow_type; + union _kc_ethtool_flow_union h_u; + struct _kc_ethtool_flow_ext h_ext; + union _kc_ethtool_flow_union m_u; + struct _kc_ethtool_flow_ext m_ext; + __u64 ring_cookie; + __u32 location; +}; +#define ethtool_rx_flow_spec _kc_ethtool_rx_flow_spec +#endif /* FLOW_EXT */ +#endif + +#define pci_disable_link_state_locked pci_disable_link_state + +#ifndef PCI_LTR_VALUE_MASK +#define PCI_LTR_VALUE_MASK 0x000003ff +#endif +#ifndef PCI_LTR_SCALE_MASK +#define PCI_LTR_SCALE_MASK 0x00001c00 +#endif +#ifndef PCI_LTR_SCALE_SHIFT +#define PCI_LTR_SCALE_SHIFT 10 +#endif + +#else /* < 2.6.40 */ +#define HAVE_ETHTOOL_SET_PHYS_ID +#endif /* < 2.6.40 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,1,0) ) +#ifndef __netdev_alloc_skb_ip_align +#define __netdev_alloc_skb_ip_align(d,l,_g) netdev_alloc_skb_ip_align(d,l) +#endif /* __netdev_alloc_skb_ip_align */ +#define dcb_ieee_setapp(dev, app) dcb_setapp(dev, app) +#define dcb_ieee_delapp(dev, app) 0 +#define dcb_ieee_getapp_mask(dev, app) (1 << app->priority) +#else /* < 3.1.0 */ +#ifndef HAVE_DCBNL_IEEE_DELAPP +#define HAVE_DCBNL_IEEE_DELAPP +#endif +#endif /* < 3.1.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,2,0) ) +#ifdef ETHTOOL_GRXRINGS +#define HAVE_ETHTOOL_GET_RXNFC_VOID_RULE_LOCS +#endif /* ETHTOOL_GRXRINGS */ + +#ifndef skb_frag_size +#define skb_frag_size(frag) _kc_skb_frag_size(frag) +static inline unsigned int _kc_skb_frag_size(const skb_frag_t *frag) +{ + return frag->size; +} +#endif /* skb_frag_size */ + +#ifndef skb_frag_size_sub +#define skb_frag_size_sub(frag, delta) _kc_skb_frag_size_sub(frag, delta) +static inline void _kc_skb_frag_size_sub(skb_frag_t *frag, int delta) +{ + frag->size -= delta; +} +#endif /* skb_frag_size_sub */ + +#ifndef skb_frag_page +#define skb_frag_page(frag) _kc_skb_frag_page(frag) +static inline struct page *_kc_skb_frag_page(const skb_frag_t *frag) +{ + return frag->page; +} +#endif /* skb_frag_page */ + +#ifndef skb_frag_address +#define skb_frag_address(frag) _kc_skb_frag_address(frag) +static inline void *_kc_skb_frag_address(const skb_frag_t *frag) +{ + return page_address(skb_frag_page(frag)) + frag->page_offset; +} +#endif /* skb_frag_address */ + +#ifndef skb_frag_dma_map +#define skb_frag_dma_map(dev,frag,offset,size,dir) \ + _kc_skb_frag_dma_map(dev,frag,offset,size,dir) +static inline dma_addr_t _kc_skb_frag_dma_map(struct device *dev, + const skb_frag_t *frag, + size_t offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_page(dev, skb_frag_page(frag), + frag->page_offset + offset, size, dir); +} +#endif /* skb_frag_dma_map */ + +#ifndef __skb_frag_unref +#define __skb_frag_unref(frag) __kc_skb_frag_unref(frag) +static inline void __kc_skb_frag_unref(skb_frag_t *frag) +{ + put_page(skb_frag_page(frag)); +} +#endif /* __skb_frag_unref */ +#else /* < 3.2.0 */ +#ifndef HAVE_PCI_DEV_FLAGS_ASSIGNED +#define HAVE_PCI_DEV_FLAGS_ASSIGNED +#define HAVE_VF_SPOOFCHK_CONFIGURE +#endif +#endif /* < 3.2.0 */ + +#if (RHEL_RELEASE_CODE && \ + (RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6,2)) && \ + (RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0))) +#undef ixgbe_get_netdev_tc_txq +#define ixgbe_get_netdev_tc_txq(dev, tc) (&netdev_extended(dev)->qos_data.tc_to_txq[tc]) +#endif + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0) ) +typedef u32 kni_netdev_features_t; +#else /* ! < 3.3.0 */ +typedef netdev_features_t kni_netdev_features_t; +#define HAVE_INT_NDO_VLAN_RX_ADD_VID +#ifdef ETHTOOL_SRXNTUPLE +#undef ETHTOOL_SRXNTUPLE +#endif +#endif /* < 3.3.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,4,0) ) +#ifndef NETIF_F_RXFCS +#define NETIF_F_RXFCS 0 +#endif /* NETIF_F_RXFCS */ +#ifndef NETIF_F_RXALL +#define NETIF_F_RXALL 0 +#endif /* NETIF_F_RXALL */ + +#define NUMTCS_RETURNS_U8 + + +#endif /* < 3.4.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,5,0) ) +static inline bool __kc_ether_addr_equal(const u8 *addr1, const u8 *addr2) +{ + return !compare_ether_addr(addr1, addr2); +} +#define ether_addr_equal(_addr1, _addr2) __kc_ether_addr_equal((_addr1),(_addr2)) +#else +#define HAVE_FDB_OPS +#endif /* < 3.5.0 */ + +/*****************************************************************************/ +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0) ) +#define NETIF_F_HW_VLAN_TX NETIF_F_HW_VLAN_CTAG_TX +#define NETIF_F_HW_VLAN_RX NETIF_F_HW_VLAN_CTAG_RX +#define NETIF_F_HW_VLAN_FILTER NETIF_F_HW_VLAN_CTAG_FILTER +#endif /* >= 3.10.0 */ + +#if ( LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ) +#ifdef CONFIG_PCI_IOV +extern int __kc_pci_vfs_assigned(struct pci_dev *dev); +#else +static inline int __kc_pci_vfs_assigned(struct pci_dev *dev) +{ + return 0; +} +#endif +#define pci_vfs_assigned(dev) __kc_pci_vfs_assigned(dev) + +#endif + +#if ( LINUX_VERSION_CODE >= KERNEL_VERSION(3,16,0) ) +#define SET_ETHTOOL_OPS(netdev, ops) ((netdev)->ethtool_ops = (ops)) +#endif /* >= 3.16.0 */ + +/* + * vlan_tx_tag_* macros renamed to skb_vlan_tag_* (Linux commit: df8a39defad4) + * For older kernels backported this commit, need to use renamed functions. + * This fix is specific to RedHat/CentOS kernels. + */ +#if (defined(RHEL_RELEASE_CODE) && \ + RHEL_RELEASE_CODE >= RHEL_RELEASE_VERSION(6, 8) && \ + LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34)) +#define vlan_tx_tag_get skb_vlan_tag_get +#define vlan_tx_tag_present skb_vlan_tag_present +#endif + +#endif /* _KCOMPAT_H_ */ diff --git a/kernel/linux/kni/kni_dev.h b/kernel/linux/kni/kni_dev.h new file mode 100644 index 00000000..6275ef27 --- /dev/null +++ b/kernel/linux/kni/kni_dev.h @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright(c) 2010-2014 Intel Corporation. + */ + +#ifndef _KNI_DEV_H_ +#define _KNI_DEV_H_ + +#ifdef pr_fmt +#undef pr_fmt +#endif +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "compat.h" + +#include <linux/if.h> +#include <linux/wait.h> +#ifdef HAVE_SIGNAL_FUNCTIONS_OWN_HEADER +#include <linux/sched/signal.h> +#else +#include <linux/sched.h> +#endif +#include <linux/netdevice.h> +#include <linux/spinlock.h> +#include <linux/list.h> + +#include <exec-env/rte_kni_common.h> +#define KNI_KTHREAD_RESCHEDULE_INTERVAL 5 /* us */ + +#define MBUF_BURST_SZ 32 + +/** + * A structure describing the private information for a kni device. + */ +struct kni_dev { + /* kni list */ + struct list_head list; + + struct net_device_stats stats; + int status; + uint16_t group_id; /* Group ID of a group of KNI devices */ + uint32_t core_id; /* Core ID to bind */ + char name[RTE_KNI_NAMESIZE]; /* Network device name */ + struct task_struct *pthread; + + /* wait queue for req/resp */ + wait_queue_head_t wq; + struct mutex sync_lock; + + /* PCI device id */ + uint16_t device_id; + + /* kni device */ + struct net_device *net_dev; + struct net_device *lad_dev; + struct pci_dev *pci_dev; + + /* queue for packets to be sent out */ + void *tx_q; + + /* queue for the packets received */ + void *rx_q; + + /* queue for the allocated mbufs those can be used to save sk buffs */ + void *alloc_q; + + /* free queue for the mbufs to be freed */ + void *free_q; + + /* request queue */ + void *req_q; + + /* response queue */ + void *resp_q; + + void *sync_kva; + void *sync_va; + + void *mbuf_kva; + void *mbuf_va; + + /* mbuf size */ + uint32_t mbuf_size; + + /* synchro for request processing */ + unsigned long synchro; + + /* buffers */ + void *pa[MBUF_BURST_SZ]; + void *va[MBUF_BURST_SZ]; + void *alloc_pa[MBUF_BURST_SZ]; + void *alloc_va[MBUF_BURST_SZ]; +}; + +void kni_net_release_fifo_phy(struct kni_dev *kni); +void kni_net_rx(struct kni_dev *kni); +void kni_net_init(struct net_device *dev); +void kni_net_config_lo_mode(char *lo_str); +void kni_net_poll_resp(struct kni_dev *kni); +void kni_set_ethtool_ops(struct net_device *netdev); + +int ixgbe_kni_probe(struct pci_dev *pdev, struct net_device **lad_dev); +void ixgbe_kni_remove(struct pci_dev *pdev); +int igb_kni_probe(struct pci_dev *pdev, struct net_device **lad_dev); +void igb_kni_remove(struct pci_dev *pdev); + +#endif diff --git a/kernel/linux/kni/kni_ethtool.c b/kernel/linux/kni/kni_ethtool.c new file mode 100644 index 00000000..a44e7d94 --- /dev/null +++ b/kernel/linux/kni/kni_ethtool.c @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright(c) 2010-2014 Intel Corporation. + */ + +#include <linux/device.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include "kni_dev.h" + +static int +kni_check_if_running(struct net_device *dev) +{ + struct kni_dev *priv = netdev_priv(dev); + + if (priv->lad_dev) + return 0; + else + return -EOPNOTSUPP; +} + +static void +kni_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct kni_dev *priv = netdev_priv(dev); + + priv->lad_dev->ethtool_ops->get_drvinfo(priv->lad_dev, info); +} + +static int +kni_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct kni_dev *priv = netdev_priv(dev); + + return priv->lad_dev->ethtool_ops->get_settings(priv->lad_dev, ecmd); +} + +static int +kni_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct kni_dev *priv = netdev_priv(dev); + + return priv->lad_dev->ethtool_ops->set_settings(priv->lad_dev, ecmd); +} + +static void +kni_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct kni_dev *priv = netdev_priv(dev); + + priv->lad_dev->ethtool_ops->get_wol(priv->lad_dev, wol); +} + +static int +kni_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct kni_dev *priv = netdev_priv(dev); + + return priv->lad_dev->ethtool_ops->set_wol(priv->lad_dev, wol); +} + +static int +kni_nway_reset(struct net_device *dev) +{ + struct kni_dev *priv = netdev_priv(dev); + + return priv->lad_dev->ethtool_ops->nway_reset(priv->lad_dev); +} + +static int +kni_get_eeprom_len(struct net_device *dev) +{ + struct kni_dev *priv = netdev_priv(dev); + + return priv->lad_dev->ethtool_ops->get_eeprom_len(priv->lad_dev); +} + +static int +kni_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, + u8 *bytes) +{ + struct kni_dev *priv = netdev_priv(dev); + + return priv->lad_dev->ethtool_ops->get_eeprom(priv->lad_dev, eeprom, + bytes); +} + +static int +kni_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, + u8 *bytes) +{ + struct kni_dev *priv = netdev_priv(dev); + + return priv->lad_dev->ethtool_ops->set_eeprom(priv->lad_dev, eeprom, + bytes); +} + +static void +kni_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring) +{ + struct kni_dev *priv = netdev_priv(dev); + + priv->lad_dev->ethtool_ops->get_ringparam(priv->lad_dev, ring); +} + +static int +kni_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ring) +{ + struct kni_dev *priv = netdev_priv(dev); + + return priv->lad_dev->ethtool_ops->set_ringparam(priv->lad_dev, ring); +} + +static void +kni_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause) +{ + struct kni_dev *priv = netdev_priv(dev); + + priv->lad_dev->ethtool_ops->get_pauseparam(priv->lad_dev, pause); +} + +static int +kni_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause) +{ + struct kni_dev *priv = netdev_priv(dev); + + return priv->lad_dev->ethtool_ops->set_pauseparam(priv->lad_dev, + pause); +} + +static u32 +kni_get_msglevel(struct net_device *dev) +{ + struct kni_dev *priv = netdev_priv(dev); + + return priv->lad_dev->ethtool_ops->get_msglevel(priv->lad_dev); +} + +static void +kni_set_msglevel(struct net_device *dev, u32 data) +{ + struct kni_dev *priv = netdev_priv(dev); + + priv->lad_dev->ethtool_ops->set_msglevel(priv->lad_dev, data); +} + +static int +kni_get_regs_len(struct net_device *dev) +{ + struct kni_dev *priv = netdev_priv(dev); + + return priv->lad_dev->ethtool_ops->get_regs_len(priv->lad_dev); +} + +static void +kni_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) +{ + struct kni_dev *priv = netdev_priv(dev); + + priv->lad_dev->ethtool_ops->get_regs(priv->lad_dev, regs, p); +} + +static void +kni_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + struct kni_dev *priv = netdev_priv(dev); + + priv->lad_dev->ethtool_ops->get_strings(priv->lad_dev, stringset, + data); +} + +static int +kni_get_sset_count(struct net_device *dev, int sset) +{ + struct kni_dev *priv = netdev_priv(dev); + + return priv->lad_dev->ethtool_ops->get_sset_count(priv->lad_dev, sset); +} + +static void +kni_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, + u64 *data) +{ + struct kni_dev *priv = netdev_priv(dev); + + priv->lad_dev->ethtool_ops->get_ethtool_stats(priv->lad_dev, stats, + data); +} + +struct ethtool_ops kni_ethtool_ops = { + .begin = kni_check_if_running, + .get_drvinfo = kni_get_drvinfo, + .get_settings = kni_get_settings, + .set_settings = kni_set_settings, + .get_regs_len = kni_get_regs_len, + .get_regs = kni_get_regs, + .get_wol = kni_get_wol, + .set_wol = kni_set_wol, + .nway_reset = kni_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = kni_get_eeprom_len, + .get_eeprom = kni_get_eeprom, + .set_eeprom = kni_set_eeprom, + .get_ringparam = kni_get_ringparam, + .set_ringparam = kni_set_ringparam, + .get_pauseparam = kni_get_pauseparam, + .set_pauseparam = kni_set_pauseparam, + .get_msglevel = kni_get_msglevel, + .set_msglevel = kni_set_msglevel, + .get_strings = kni_get_strings, + .get_sset_count = kni_get_sset_count, + .get_ethtool_stats = kni_get_ethtool_stats, +}; + +void +kni_set_ethtool_ops(struct net_device *netdev) +{ + netdev->ethtool_ops = &kni_ethtool_ops; +} diff --git a/kernel/linux/kni/kni_fifo.h b/kernel/linux/kni/kni_fifo.h new file mode 100644 index 00000000..9a4762de --- /dev/null +++ b/kernel/linux/kni/kni_fifo.h @@ -0,0 +1,75 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright(c) 2010-2014 Intel Corporation. + */ + +#ifndef _KNI_FIFO_H_ +#define _KNI_FIFO_H_ + +#include <exec-env/rte_kni_common.h> + +/** + * Adds num elements into the fifo. Return the number actually written + */ +static inline uint32_t +kni_fifo_put(struct rte_kni_fifo *fifo, void **data, uint32_t num) +{ + uint32_t i = 0; + uint32_t fifo_write = fifo->write; + uint32_t fifo_read = fifo->read; + uint32_t new_write = fifo_write; + + for (i = 0; i < num; i++) { + new_write = (new_write + 1) & (fifo->len - 1); + + if (new_write == fifo_read) + break; + fifo->buffer[fifo_write] = data[i]; + fifo_write = new_write; + } + fifo->write = fifo_write; + + return i; +} + +/** + * Get up to num elements from the fifo. Return the number actully read + */ +static inline uint32_t +kni_fifo_get(struct rte_kni_fifo *fifo, void **data, uint32_t num) +{ + uint32_t i = 0; + uint32_t new_read = fifo->read; + uint32_t fifo_write = fifo->write; + + for (i = 0; i < num; i++) { + if (new_read == fifo_write) + break; + + data[i] = fifo->buffer[new_read]; + new_read = (new_read + 1) & (fifo->len - 1); + } + fifo->read = new_read; + + return i; +} + +/** + * Get the num of elements in the fifo + */ +static inline uint32_t +kni_fifo_count(struct rte_kni_fifo *fifo) +{ + return (fifo->len + fifo->write - fifo->read) & (fifo->len - 1); +} + +/** + * Get the num of available elements in the fifo + */ +static inline uint32_t +kni_fifo_free_count(struct rte_kni_fifo *fifo) +{ + return (fifo->read - fifo->write - 1) & (fifo->len - 1); +} + +#endif /* _KNI_FIFO_H_ */ diff --git a/kernel/linux/kni/kni_misc.c b/kernel/linux/kni/kni_misc.c new file mode 100644 index 00000000..fa69f8e6 --- /dev/null +++ b/kernel/linux/kni/kni_misc.c @@ -0,0 +1,665 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright(c) 2010-2014 Intel Corporation. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/miscdevice.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/pci.h> +#include <linux/kthread.h> +#include <linux/rwsem.h> +#include <linux/mutex.h> +#include <linux/nsproxy.h> +#include <net/net_namespace.h> +#include <net/netns/generic.h> + +#include <exec-env/rte_kni_common.h> + +#include "compat.h" +#include "kni_dev.h" + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("Intel Corporation"); +MODULE_DESCRIPTION("Kernel Module for managing kni devices"); + +#define KNI_RX_LOOP_NUM 1000 + +#define KNI_MAX_DEVICES 32 + +extern const struct pci_device_id ixgbe_pci_tbl[]; +extern const struct pci_device_id igb_pci_tbl[]; + +/* loopback mode */ +static char *lo_mode; + +/* Kernel thread mode */ +static char *kthread_mode; +static uint32_t multiple_kthread_on; + +#define KNI_DEV_IN_USE_BIT_NUM 0 /* Bit number for device in use */ + +static int kni_net_id; + +struct kni_net { + unsigned long device_in_use; /* device in use flag */ + struct mutex kni_kthread_lock; + struct task_struct *kni_kthread; + struct rw_semaphore kni_list_lock; + struct list_head kni_list_head; +}; + +static int __net_init +kni_init_net(struct net *net) +{ +#ifdef HAVE_SIMPLIFIED_PERNET_OPERATIONS + struct kni_net *knet = net_generic(net, kni_net_id); + + memset(knet, 0, sizeof(*knet)); +#else + struct kni_net *knet; + int ret; + + knet = kzalloc(sizeof(struct kni_net), GFP_KERNEL); + if (!knet) { + ret = -ENOMEM; + return ret; + } +#endif + + /* Clear the bit of device in use */ + clear_bit(KNI_DEV_IN_USE_BIT_NUM, &knet->device_in_use); + + mutex_init(&knet->kni_kthread_lock); + + init_rwsem(&knet->kni_list_lock); + INIT_LIST_HEAD(&knet->kni_list_head); + +#ifdef HAVE_SIMPLIFIED_PERNET_OPERATIONS + return 0; +#else + ret = net_assign_generic(net, kni_net_id, knet); + if (ret < 0) + kfree(knet); + + return ret; +#endif +} + +static void __net_exit +kni_exit_net(struct net *net) +{ + struct kni_net *knet __maybe_unused; + + knet = net_generic(net, kni_net_id); + mutex_destroy(&knet->kni_kthread_lock); + +#ifndef HAVE_SIMPLIFIED_PERNET_OPERATIONS + kfree(knet); +#endif +} + +static struct pernet_operations kni_net_ops = { + .init = kni_init_net, + .exit = kni_exit_net, +#ifdef HAVE_SIMPLIFIED_PERNET_OPERATIONS + .id = &kni_net_id, + .size = sizeof(struct kni_net), +#endif +}; + +static int +kni_thread_single(void *data) +{ + struct kni_net *knet = data; + int j; + struct kni_dev *dev; + + while (!kthread_should_stop()) { + down_read(&knet->kni_list_lock); + for (j = 0; j < KNI_RX_LOOP_NUM; j++) { + list_for_each_entry(dev, &knet->kni_list_head, list) { + kni_net_rx(dev); + kni_net_poll_resp(dev); + } + } + up_read(&knet->kni_list_lock); +#ifdef RTE_KNI_PREEMPT_DEFAULT + /* reschedule out for a while */ + schedule_timeout_interruptible( + usecs_to_jiffies(KNI_KTHREAD_RESCHEDULE_INTERVAL)); +#endif + } + + return 0; +} + +static int +kni_thread_multiple(void *param) +{ + int j; + struct kni_dev *dev = param; + + while (!kthread_should_stop()) { + for (j = 0; j < KNI_RX_LOOP_NUM; j++) { + kni_net_rx(dev); + kni_net_poll_resp(dev); + } +#ifdef RTE_KNI_PREEMPT_DEFAULT + schedule_timeout_interruptible( + usecs_to_jiffies(KNI_KTHREAD_RESCHEDULE_INTERVAL)); +#endif + } + + return 0; +} + +static int +kni_open(struct inode *inode, struct file *file) +{ + struct net *net = current->nsproxy->net_ns; + struct kni_net *knet = net_generic(net, kni_net_id); + + /* kni device can be opened by one user only per netns */ + if (test_and_set_bit(KNI_DEV_IN_USE_BIT_NUM, &knet->device_in_use)) + return -EBUSY; + + file->private_data = get_net(net); + pr_debug("/dev/kni opened\n"); + + return 0; +} + +static int +kni_dev_remove(struct kni_dev *dev) +{ + if (!dev) + return -ENODEV; + +#ifdef RTE_KNI_KMOD_ETHTOOL + if (dev->pci_dev) { + if (pci_match_id(ixgbe_pci_tbl, dev->pci_dev)) + ixgbe_kni_remove(dev->pci_dev); + else if (pci_match_id(igb_pci_tbl, dev->pci_dev)) + igb_kni_remove(dev->pci_dev); + } +#endif + + if (dev->net_dev) { + unregister_netdev(dev->net_dev); + free_netdev(dev->net_dev); + } + + kni_net_release_fifo_phy(dev); + + return 0; +} + +static int +kni_release(struct inode *inode, struct file *file) +{ + struct net *net = file->private_data; + struct kni_net *knet = net_generic(net, kni_net_id); + struct kni_dev *dev, *n; + + /* Stop kernel thread for single mode */ + if (multiple_kthread_on == 0) { + mutex_lock(&knet->kni_kthread_lock); + /* Stop kernel thread */ + if (knet->kni_kthread != NULL) { + kthread_stop(knet->kni_kthread); + knet->kni_kthread = NULL; + } + mutex_unlock(&knet->kni_kthread_lock); + } + + down_write(&knet->kni_list_lock); + list_for_each_entry_safe(dev, n, &knet->kni_list_head, list) { + /* Stop kernel thread for multiple mode */ + if (multiple_kthread_on && dev->pthread != NULL) { + kthread_stop(dev->pthread); + dev->pthread = NULL; + } + + kni_dev_remove(dev); + list_del(&dev->list); + } + up_write(&knet->kni_list_lock); + + /* Clear the bit of device in use */ + clear_bit(KNI_DEV_IN_USE_BIT_NUM, &knet->device_in_use); + + put_net(net); + pr_debug("/dev/kni closed\n"); + + return 0; +} + +static int +kni_check_param(struct kni_dev *kni, struct rte_kni_device_info *dev) +{ + if (!kni || !dev) + return -1; + + /* Check if network name has been used */ + if (!strncmp(kni->name, dev->name, RTE_KNI_NAMESIZE)) { + pr_err("KNI name %s duplicated\n", dev->name); + return -1; + } + + return 0; +} + +static int +kni_run_thread(struct kni_net *knet, struct kni_dev *kni, uint8_t force_bind) +{ + /** + * Create a new kernel thread for multiple mode, set its core affinity, + * and finally wake it up. + */ + if (multiple_kthread_on) { + kni->pthread = kthread_create(kni_thread_multiple, + (void *)kni, "kni_%s", kni->name); + if (IS_ERR(kni->pthread)) { + kni_dev_remove(kni); + return -ECANCELED; + } + + if (force_bind) + kthread_bind(kni->pthread, kni->core_id); + wake_up_process(kni->pthread); + } else { + mutex_lock(&knet->kni_kthread_lock); + + if (knet->kni_kthread == NULL) { + knet->kni_kthread = kthread_create(kni_thread_single, + (void *)knet, "kni_single"); + if (IS_ERR(knet->kni_kthread)) { + mutex_unlock(&knet->kni_kthread_lock); + kni_dev_remove(kni); + return -ECANCELED; + } + + if (force_bind) + kthread_bind(knet->kni_kthread, kni->core_id); + wake_up_process(knet->kni_kthread); + } + + mutex_unlock(&knet->kni_kthread_lock); + } + + return 0; +} + +static int +kni_ioctl_create(struct net *net, uint32_t ioctl_num, + unsigned long ioctl_param) +{ + struct kni_net *knet = net_generic(net, kni_net_id); + int ret; + struct rte_kni_device_info dev_info; + struct net_device *net_dev = NULL; + struct kni_dev *kni, *dev, *n; +#ifdef RTE_KNI_KMOD_ETHTOOL + struct pci_dev *found_pci = NULL; + struct net_device *lad_dev = NULL; + struct pci_dev *pci = NULL; +#endif + + pr_info("Creating kni...\n"); + /* Check the buffer size, to avoid warning */ + if (_IOC_SIZE(ioctl_num) > sizeof(dev_info)) + return -EINVAL; + + /* Copy kni info from user space */ + ret = copy_from_user(&dev_info, (void *)ioctl_param, sizeof(dev_info)); + if (ret) { + pr_err("copy_from_user in kni_ioctl_create"); + return -EIO; + } + + /* Check if name is zero-ended */ + if (strnlen(dev_info.name, sizeof(dev_info.name)) == sizeof(dev_info.name)) { + pr_err("kni.name not zero-terminated"); + return -EINVAL; + } + + /** + * Check if the cpu core id is valid for binding. + */ + if (dev_info.force_bind && !cpu_online(dev_info.core_id)) { + pr_err("cpu %u is not online\n", dev_info.core_id); + return -EINVAL; + } + + /* Check if it has been created */ + down_read(&knet->kni_list_lock); + list_for_each_entry_safe(dev, n, &knet->kni_list_head, list) { + if (kni_check_param(dev, &dev_info) < 0) { + up_read(&knet->kni_list_lock); + return -EINVAL; + } + } + up_read(&knet->kni_list_lock); + + net_dev = alloc_netdev(sizeof(struct kni_dev), dev_info.name, +#ifdef NET_NAME_USER + NET_NAME_USER, +#endif + kni_net_init); + if (net_dev == NULL) { + pr_err("error allocating device \"%s\"\n", dev_info.name); + return -EBUSY; + } + + dev_net_set(net_dev, net); + + kni = netdev_priv(net_dev); + + kni->net_dev = net_dev; + kni->group_id = dev_info.group_id; + kni->core_id = dev_info.core_id; + strncpy(kni->name, dev_info.name, RTE_KNI_NAMESIZE); + + /* Translate user space info into kernel space info */ + kni->tx_q = phys_to_virt(dev_info.tx_phys); + kni->rx_q = phys_to_virt(dev_info.rx_phys); + kni->alloc_q = phys_to_virt(dev_info.alloc_phys); + kni->free_q = phys_to_virt(dev_info.free_phys); + + kni->req_q = phys_to_virt(dev_info.req_phys); + kni->resp_q = phys_to_virt(dev_info.resp_phys); + kni->sync_va = dev_info.sync_va; + kni->sync_kva = phys_to_virt(dev_info.sync_phys); + + kni->mbuf_size = dev_info.mbuf_size; + + pr_debug("tx_phys: 0x%016llx, tx_q addr: 0x%p\n", + (unsigned long long) dev_info.tx_phys, kni->tx_q); + pr_debug("rx_phys: 0x%016llx, rx_q addr: 0x%p\n", + (unsigned long long) dev_info.rx_phys, kni->rx_q); + pr_debug("alloc_phys: 0x%016llx, alloc_q addr: 0x%p\n", + (unsigned long long) dev_info.alloc_phys, kni->alloc_q); + pr_debug("free_phys: 0x%016llx, free_q addr: 0x%p\n", + (unsigned long long) dev_info.free_phys, kni->free_q); + pr_debug("req_phys: 0x%016llx, req_q addr: 0x%p\n", + (unsigned long long) dev_info.req_phys, kni->req_q); + pr_debug("resp_phys: 0x%016llx, resp_q addr: 0x%p\n", + (unsigned long long) dev_info.resp_phys, kni->resp_q); + pr_debug("mbuf_size: %u\n", kni->mbuf_size); + + pr_debug("PCI: %02x:%02x.%02x %04x:%04x\n", + dev_info.bus, + dev_info.devid, + dev_info.function, + dev_info.vendor_id, + dev_info.device_id); +#ifdef RTE_KNI_KMOD_ETHTOOL + pci = pci_get_device(dev_info.vendor_id, dev_info.device_id, NULL); + + /* Support Ethtool */ + while (pci) { + pr_debug("pci_bus: %02x:%02x:%02x\n", + pci->bus->number, + PCI_SLOT(pci->devfn), + PCI_FUNC(pci->devfn)); + + if ((pci->bus->number == dev_info.bus) && + (PCI_SLOT(pci->devfn) == dev_info.devid) && + (PCI_FUNC(pci->devfn) == dev_info.function)) { + found_pci = pci; + + if (pci_match_id(ixgbe_pci_tbl, found_pci)) + ret = ixgbe_kni_probe(found_pci, &lad_dev); + else if (pci_match_id(igb_pci_tbl, found_pci)) + ret = igb_kni_probe(found_pci, &lad_dev); + else + ret = -1; + + pr_debug("PCI found: pci=0x%p, lad_dev=0x%p\n", + pci, lad_dev); + if (ret == 0) { + kni->lad_dev = lad_dev; + kni_set_ethtool_ops(kni->net_dev); + } else { + pr_err("Device not supported by ethtool"); + kni->lad_dev = NULL; + } + + kni->pci_dev = found_pci; + kni->device_id = dev_info.device_id; + break; + } + pci = pci_get_device(dev_info.vendor_id, + dev_info.device_id, pci); + } + if (pci) + pci_dev_put(pci); +#endif + + if (kni->lad_dev) + ether_addr_copy(net_dev->dev_addr, kni->lad_dev->dev_addr); + else { + /* if user has provided a valid mac address */ + if (is_valid_ether_addr((unsigned char *)(dev_info.mac_addr))) + memcpy(net_dev->dev_addr, dev_info.mac_addr, ETH_ALEN); + else + /* + * Generate random mac address. eth_random_addr() is the + * newer version of generating mac address in kernel. + */ + random_ether_addr(net_dev->dev_addr); + } + + if (dev_info.mtu) + net_dev->mtu = dev_info.mtu; + + ret = register_netdev(net_dev); + if (ret) { + pr_err("error %i registering device \"%s\"\n", + ret, dev_info.name); + kni->net_dev = NULL; + kni_dev_remove(kni); + free_netdev(net_dev); + return -ENODEV; + } + + ret = kni_run_thread(knet, kni, dev_info.force_bind); + if (ret != 0) + return ret; + + down_write(&knet->kni_list_lock); + list_add(&kni->list, &knet->kni_list_head); + up_write(&knet->kni_list_lock); + + return 0; +} + +static int +kni_ioctl_release(struct net *net, uint32_t ioctl_num, + unsigned long ioctl_param) +{ + struct kni_net *knet = net_generic(net, kni_net_id); + int ret = -EINVAL; + struct kni_dev *dev, *n; + struct rte_kni_device_info dev_info; + + if (_IOC_SIZE(ioctl_num) > sizeof(dev_info)) + return -EINVAL; + + ret = copy_from_user(&dev_info, (void *)ioctl_param, sizeof(dev_info)); + if (ret) { + pr_err("copy_from_user in kni_ioctl_release"); + return -EIO; + } + + /* Release the network device according to its name */ + if (strlen(dev_info.name) == 0) + return ret; + + down_write(&knet->kni_list_lock); + list_for_each_entry_safe(dev, n, &knet->kni_list_head, list) { + if (strncmp(dev->name, dev_info.name, RTE_KNI_NAMESIZE) != 0) + continue; + + if (multiple_kthread_on && dev->pthread != NULL) { + kthread_stop(dev->pthread); + dev->pthread = NULL; + } + + kni_dev_remove(dev); + list_del(&dev->list); + ret = 0; + break; + } + up_write(&knet->kni_list_lock); + pr_info("%s release kni named %s\n", + (ret == 0 ? "Successfully" : "Unsuccessfully"), dev_info.name); + + return ret; +} + +static int +kni_ioctl(struct inode *inode, uint32_t ioctl_num, unsigned long ioctl_param) +{ + int ret = -EINVAL; + struct net *net = current->nsproxy->net_ns; + + pr_debug("IOCTL num=0x%0x param=0x%0lx\n", ioctl_num, ioctl_param); + + /* + * Switch according to the ioctl called + */ + switch (_IOC_NR(ioctl_num)) { + case _IOC_NR(RTE_KNI_IOCTL_TEST): + /* For test only, not used */ + break; + case _IOC_NR(RTE_KNI_IOCTL_CREATE): + ret = kni_ioctl_create(net, ioctl_num, ioctl_param); + break; + case _IOC_NR(RTE_KNI_IOCTL_RELEASE): + ret = kni_ioctl_release(net, ioctl_num, ioctl_param); + break; + default: + pr_debug("IOCTL default\n"); + break; + } + + return ret; +} + +static int +kni_compat_ioctl(struct inode *inode, uint32_t ioctl_num, + unsigned long ioctl_param) +{ + /* 32 bits app on 64 bits OS to be supported later */ + pr_debug("Not implemented.\n"); + + return -EINVAL; +} + +static const struct file_operations kni_fops = { + .owner = THIS_MODULE, + .open = kni_open, + .release = kni_release, + .unlocked_ioctl = (void *)kni_ioctl, + .compat_ioctl = (void *)kni_compat_ioctl, +}; + +static struct miscdevice kni_misc = { + .minor = MISC_DYNAMIC_MINOR, + .name = KNI_DEVICE, + .fops = &kni_fops, +}; + +static int __init +kni_parse_kthread_mode(void) +{ + if (!kthread_mode) + return 0; + + if (strcmp(kthread_mode, "single") == 0) + return 0; + else if (strcmp(kthread_mode, "multiple") == 0) + multiple_kthread_on = 1; + else + return -1; + + return 0; +} + +static int __init +kni_init(void) +{ + int rc; + + if (kni_parse_kthread_mode() < 0) { + pr_err("Invalid parameter for kthread_mode\n"); + return -EINVAL; + } + + if (multiple_kthread_on == 0) + pr_debug("Single kernel thread for all KNI devices\n"); + else + pr_debug("Multiple kernel thread mode enabled\n"); + +#ifdef HAVE_SIMPLIFIED_PERNET_OPERATIONS + rc = register_pernet_subsys(&kni_net_ops); +#else + rc = register_pernet_gen_subsys(&kni_net_id, &kni_net_ops); +#endif + if (rc) + return -EPERM; + + rc = misc_register(&kni_misc); + if (rc != 0) { + pr_err("Misc registration failed\n"); + goto out; + } + + /* Configure the lo mode according to the input parameter */ + kni_net_config_lo_mode(lo_mode); + + return 0; + +out: +#ifdef HAVE_SIMPLIFIED_PERNET_OPERATIONS + unregister_pernet_subsys(&kni_net_ops); +#else + unregister_pernet_gen_subsys(kni_net_id, &kni_net_ops); +#endif + return rc; +} + +static void __exit +kni_exit(void) +{ + misc_deregister(&kni_misc); +#ifdef HAVE_SIMPLIFIED_PERNET_OPERATIONS + unregister_pernet_subsys(&kni_net_ops); +#else + unregister_pernet_gen_subsys(kni_net_id, &kni_net_ops); +#endif +} + +module_init(kni_init); +module_exit(kni_exit); + +module_param(lo_mode, charp, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(lo_mode, +"KNI loopback mode (default=lo_mode_none):\n" +" lo_mode_none Kernel loopback disabled\n" +" lo_mode_fifo Enable kernel loopback with fifo\n" +" lo_mode_fifo_skb Enable kernel loopback with fifo and skb buffer\n" +"\n" +); + +module_param(kthread_mode, charp, S_IRUGO); +MODULE_PARM_DESC(kthread_mode, +"Kernel thread mode (default=single):\n" +" single Single kernel thread mode enabled.\n" +" multiple Multiple kernel thread mode enabled.\n" +"\n" +); diff --git a/kernel/linux/kni/kni_net.c b/kernel/linux/kni/kni_net.c new file mode 100644 index 00000000..7fcfa106 --- /dev/null +++ b/kernel/linux/kni/kni_net.c @@ -0,0 +1,797 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright(c) 2010-2014 Intel Corporation. + */ + +/* + * This code is inspired from the book "Linux Device Drivers" by + * Alessandro Rubini and Jonathan Corbet, published by O'Reilly & Associates + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> /* eth_type_trans */ +#include <linux/skbuff.h> +#include <linux/kthread.h> +#include <linux/delay.h> + +#include <exec-env/rte_kni_common.h> +#include <kni_fifo.h> + +#include "compat.h" +#include "kni_dev.h" + +#define WD_TIMEOUT 5 /*jiffies */ + +#define KNI_WAIT_RESPONSE_TIMEOUT 300 /* 3 seconds */ + +/* typedef for rx function */ +typedef void (*kni_net_rx_t)(struct kni_dev *kni); + +static void kni_net_rx_normal(struct kni_dev *kni); + +/* kni rx function pointer, with default to normal rx */ +static kni_net_rx_t kni_net_rx_func = kni_net_rx_normal; + +/* physical address to kernel virtual address */ +static void * +pa2kva(void *pa) +{ + return phys_to_virt((unsigned long)pa); +} + +/* physical address to virtual address */ +static void * +pa2va(void *pa, struct rte_kni_mbuf *m) +{ + void *va; + + va = (void *)((unsigned long)pa + + (unsigned long)m->buf_addr - + (unsigned long)m->buf_physaddr); + return va; +} + +/* mbuf data kernel virtual address from mbuf kernel virtual address */ +static void * +kva2data_kva(struct rte_kni_mbuf *m) +{ + return phys_to_virt(m->buf_physaddr + m->data_off); +} + +/* virtual address to physical address */ +static void * +va2pa(void *va, struct rte_kni_mbuf *m) +{ + void *pa; + + pa = (void *)((unsigned long)va - + ((unsigned long)m->buf_addr - + (unsigned long)m->buf_physaddr)); + return pa; +} + +/* + * It can be called to process the request. + */ +static int +kni_net_process_request(struct kni_dev *kni, struct rte_kni_request *req) +{ + int ret = -1; + void *resp_va; + uint32_t num; + int ret_val; + + if (!kni || !req) { + pr_err("No kni instance or request\n"); + return -EINVAL; + } + + mutex_lock(&kni->sync_lock); + + /* Construct data */ + memcpy(kni->sync_kva, req, sizeof(struct rte_kni_request)); + num = kni_fifo_put(kni->req_q, &kni->sync_va, 1); + if (num < 1) { + pr_err("Cannot send to req_q\n"); + ret = -EBUSY; + goto fail; + } + + ret_val = wait_event_interruptible_timeout(kni->wq, + kni_fifo_count(kni->resp_q), 3 * HZ); + if (signal_pending(current) || ret_val <= 0) { + ret = -ETIME; + goto fail; + } + num = kni_fifo_get(kni->resp_q, (void **)&resp_va, 1); + if (num != 1 || resp_va != kni->sync_va) { + /* This should never happen */ + pr_err("No data in resp_q\n"); + ret = -ENODATA; + goto fail; + } + + memcpy(req, kni->sync_kva, sizeof(struct rte_kni_request)); + ret = 0; + +fail: + mutex_unlock(&kni->sync_lock); + return ret; +} + +/* + * Open and close + */ +static int +kni_net_open(struct net_device *dev) +{ + int ret; + struct rte_kni_request req; + struct kni_dev *kni = netdev_priv(dev); + + netif_start_queue(dev); + + memset(&req, 0, sizeof(req)); + req.req_id = RTE_KNI_REQ_CFG_NETWORK_IF; + + /* Setting if_up to non-zero means up */ + req.if_up = 1; + ret = kni_net_process_request(kni, &req); + + return (ret == 0) ? req.result : ret; +} + +static int +kni_net_release(struct net_device *dev) +{ + int ret; + struct rte_kni_request req; + struct kni_dev *kni = netdev_priv(dev); + + netif_stop_queue(dev); /* can't transmit any more */ + + memset(&req, 0, sizeof(req)); + req.req_id = RTE_KNI_REQ_CFG_NETWORK_IF; + + /* Setting if_up to 0 means down */ + req.if_up = 0; + ret = kni_net_process_request(kni, &req); + + return (ret == 0) ? req.result : ret; +} + +static void +kni_fifo_trans_pa2va(struct kni_dev *kni, + struct rte_kni_fifo *src_pa, struct rte_kni_fifo *dst_va) +{ + uint32_t ret, i, num_dst, num_rx; + void *kva; + do { + num_dst = kni_fifo_free_count(dst_va); + if (num_dst == 0) + return; + + num_rx = min_t(uint32_t, num_dst, MBUF_BURST_SZ); + + num_rx = kni_fifo_get(src_pa, kni->pa, num_rx); + if (num_rx == 0) + return; + + for (i = 0; i < num_rx; i++) { + kva = pa2kva(kni->pa[i]); + kni->va[i] = pa2va(kni->pa[i], kva); + } + + ret = kni_fifo_put(dst_va, kni->va, num_rx); + if (ret != num_rx) { + /* Failing should not happen */ + pr_err("Fail to enqueue entries into dst_va\n"); + return; + } + } while (1); +} + +/* Try to release mbufs when kni release */ +void kni_net_release_fifo_phy(struct kni_dev *kni) +{ + /* release rx_q first, because it can't release in userspace */ + kni_fifo_trans_pa2va(kni, kni->rx_q, kni->free_q); + /* release alloc_q for speeding up kni release in userspace */ + kni_fifo_trans_pa2va(kni, kni->alloc_q, kni->free_q); +} + +/* + * Configuration changes (passed on by ifconfig) + */ +static int +kni_net_config(struct net_device *dev, struct ifmap *map) +{ + if (dev->flags & IFF_UP) /* can't act on a running interface */ + return -EBUSY; + + /* ignore other fields */ + return 0; +} + +/* + * Transmit a packet (called by the kernel) + */ +static int +kni_net_tx(struct sk_buff *skb, struct net_device *dev) +{ + int len = 0; + uint32_t ret; + struct kni_dev *kni = netdev_priv(dev); + struct rte_kni_mbuf *pkt_kva = NULL; + void *pkt_pa = NULL; + void *pkt_va = NULL; + + /* save the timestamp */ +#ifdef HAVE_TRANS_START_HELPER + netif_trans_update(dev); +#else + dev->trans_start = jiffies; +#endif + + /* Check if the length of skb is less than mbuf size */ + if (skb->len > kni->mbuf_size) + goto drop; + + /** + * Check if it has at least one free entry in tx_q and + * one entry in alloc_q. + */ + if (kni_fifo_free_count(kni->tx_q) == 0 || + kni_fifo_count(kni->alloc_q) == 0) { + /** + * If no free entry in tx_q or no entry in alloc_q, + * drops skb and goes out. + */ + goto drop; + } + + /* dequeue a mbuf from alloc_q */ + ret = kni_fifo_get(kni->alloc_q, &pkt_pa, 1); + if (likely(ret == 1)) { + void *data_kva; + + pkt_kva = pa2kva(pkt_pa); + data_kva = kva2data_kva(pkt_kva); + pkt_va = pa2va(pkt_pa, pkt_kva); + + len = skb->len; + memcpy(data_kva, skb->data, len); + if (unlikely(len < ETH_ZLEN)) { + memset(data_kva + len, 0, ETH_ZLEN - len); + len = ETH_ZLEN; + } + pkt_kva->pkt_len = len; + pkt_kva->data_len = len; + + /* enqueue mbuf into tx_q */ + ret = kni_fifo_put(kni->tx_q, &pkt_va, 1); + if (unlikely(ret != 1)) { + /* Failing should not happen */ + pr_err("Fail to enqueue mbuf into tx_q\n"); + goto drop; + } + } else { + /* Failing should not happen */ + pr_err("Fail to dequeue mbuf from alloc_q\n"); + goto drop; + } + + /* Free skb and update statistics */ + dev_kfree_skb(skb); + kni->stats.tx_bytes += len; + kni->stats.tx_packets++; + + return NETDEV_TX_OK; + +drop: + /* Free skb and update statistics */ + dev_kfree_skb(skb); + kni->stats.tx_dropped++; + + return NETDEV_TX_OK; +} + +/* + * RX: normal working mode + */ +static void +kni_net_rx_normal(struct kni_dev *kni) +{ + uint32_t ret; + uint32_t len; + uint32_t i, num_rx, num_fq; + struct rte_kni_mbuf *kva; + void *data_kva; + struct sk_buff *skb; + struct net_device *dev = kni->net_dev; + + /* Get the number of free entries in free_q */ + num_fq = kni_fifo_free_count(kni->free_q); + if (num_fq == 0) { + /* No room on the free_q, bail out */ + return; + } + + /* Calculate the number of entries to dequeue from rx_q */ + num_rx = min_t(uint32_t, num_fq, MBUF_BURST_SZ); + + /* Burst dequeue from rx_q */ + num_rx = kni_fifo_get(kni->rx_q, kni->pa, num_rx); + if (num_rx == 0) + return; + + /* Transfer received packets to netif */ + for (i = 0; i < num_rx; i++) { + kva = pa2kva(kni->pa[i]); + len = kva->pkt_len; + data_kva = kva2data_kva(kva); + kni->va[i] = pa2va(kni->pa[i], kva); + + skb = dev_alloc_skb(len + 2); + if (!skb) { + /* Update statistics */ + kni->stats.rx_dropped++; + continue; + } + + /* Align IP on 16B boundary */ + skb_reserve(skb, 2); + + if (kva->nb_segs == 1) { + memcpy(skb_put(skb, len), data_kva, len); + } else { + int nb_segs; + int kva_nb_segs = kva->nb_segs; + + for (nb_segs = 0; nb_segs < kva_nb_segs; nb_segs++) { + memcpy(skb_put(skb, kva->data_len), + data_kva, kva->data_len); + + if (!kva->next) + break; + + kva = pa2kva(va2pa(kva->next, kva)); + data_kva = kva2data_kva(kva); + } + } + + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_UNNECESSARY; + + /* Call netif interface */ + netif_rx_ni(skb); + + /* Update statistics */ + kni->stats.rx_bytes += len; + kni->stats.rx_packets++; + } + + /* Burst enqueue mbufs into free_q */ + ret = kni_fifo_put(kni->free_q, kni->va, num_rx); + if (ret != num_rx) + /* Failing should not happen */ + pr_err("Fail to enqueue entries into free_q\n"); +} + +/* + * RX: loopback with enqueue/dequeue fifos. + */ +static void +kni_net_rx_lo_fifo(struct kni_dev *kni) +{ + uint32_t ret; + uint32_t len; + uint32_t i, num, num_rq, num_tq, num_aq, num_fq; + struct rte_kni_mbuf *kva; + void *data_kva; + struct rte_kni_mbuf *alloc_kva; + void *alloc_data_kva; + + /* Get the number of entries in rx_q */ + num_rq = kni_fifo_count(kni->rx_q); + + /* Get the number of free entrie in tx_q */ + num_tq = kni_fifo_free_count(kni->tx_q); + + /* Get the number of entries in alloc_q */ + num_aq = kni_fifo_count(kni->alloc_q); + + /* Get the number of free entries in free_q */ + num_fq = kni_fifo_free_count(kni->free_q); + + /* Calculate the number of entries to be dequeued from rx_q */ + num = min(num_rq, num_tq); + num = min(num, num_aq); + num = min(num, num_fq); + num = min_t(uint32_t, num, MBUF_BURST_SZ); + + /* Return if no entry to dequeue from rx_q */ + if (num == 0) + return; + + /* Burst dequeue from rx_q */ + ret = kni_fifo_get(kni->rx_q, kni->pa, num); + if (ret == 0) + return; /* Failing should not happen */ + + /* Dequeue entries from alloc_q */ + ret = kni_fifo_get(kni->alloc_q, kni->alloc_pa, num); + if (ret) { + num = ret; + /* Copy mbufs */ + for (i = 0; i < num; i++) { + kva = pa2kva(kni->pa[i]); + len = kva->pkt_len; + data_kva = kva2data_kva(kva); + kni->va[i] = pa2va(kni->pa[i], kva); + + alloc_kva = pa2kva(kni->alloc_pa[i]); + alloc_data_kva = kva2data_kva(alloc_kva); + kni->alloc_va[i] = pa2va(kni->alloc_pa[i], alloc_kva); + + memcpy(alloc_data_kva, data_kva, len); + alloc_kva->pkt_len = len; + alloc_kva->data_len = len; + + kni->stats.tx_bytes += len; + kni->stats.rx_bytes += len; + } + + /* Burst enqueue mbufs into tx_q */ + ret = kni_fifo_put(kni->tx_q, kni->alloc_va, num); + if (ret != num) + /* Failing should not happen */ + pr_err("Fail to enqueue mbufs into tx_q\n"); + } + + /* Burst enqueue mbufs into free_q */ + ret = kni_fifo_put(kni->free_q, kni->va, num); + if (ret != num) + /* Failing should not happen */ + pr_err("Fail to enqueue mbufs into free_q\n"); + + /** + * Update statistic, and enqueue/dequeue failure is impossible, + * as all queues are checked at first. + */ + kni->stats.tx_packets += num; + kni->stats.rx_packets += num; +} + +/* + * RX: loopback with enqueue/dequeue fifos and sk buffer copies. + */ +static void +kni_net_rx_lo_fifo_skb(struct kni_dev *kni) +{ + uint32_t ret; + uint32_t len; + uint32_t i, num_rq, num_fq, num; + struct rte_kni_mbuf *kva; + void *data_kva; + struct sk_buff *skb; + struct net_device *dev = kni->net_dev; + + /* Get the number of entries in rx_q */ + num_rq = kni_fifo_count(kni->rx_q); + + /* Get the number of free entries in free_q */ + num_fq = kni_fifo_free_count(kni->free_q); + + /* Calculate the number of entries to dequeue from rx_q */ + num = min(num_rq, num_fq); + num = min_t(uint32_t, num, MBUF_BURST_SZ); + + /* Return if no entry to dequeue from rx_q */ + if (num == 0) + return; + + /* Burst dequeue mbufs from rx_q */ + ret = kni_fifo_get(kni->rx_q, kni->pa, num); + if (ret == 0) + return; + + /* Copy mbufs to sk buffer and then call tx interface */ + for (i = 0; i < num; i++) { + kva = pa2kva(kni->pa[i]); + len = kva->pkt_len; + data_kva = kva2data_kva(kva); + kni->va[i] = pa2va(kni->pa[i], kva); + + skb = dev_alloc_skb(len + 2); + if (skb) { + /* Align IP on 16B boundary */ + skb_reserve(skb, 2); + memcpy(skb_put(skb, len), data_kva, len); + skb->dev = dev; + skb->ip_summed = CHECKSUM_UNNECESSARY; + dev_kfree_skb(skb); + } + + /* Simulate real usage, allocate/copy skb twice */ + skb = dev_alloc_skb(len + 2); + if (skb == NULL) { + kni->stats.rx_dropped++; + continue; + } + + /* Align IP on 16B boundary */ + skb_reserve(skb, 2); + + if (kva->nb_segs == 1) { + memcpy(skb_put(skb, len), data_kva, len); + } else { + int nb_segs; + int kva_nb_segs = kva->nb_segs; + + for (nb_segs = 0; nb_segs < kva_nb_segs; nb_segs++) { + memcpy(skb_put(skb, kva->data_len), + data_kva, kva->data_len); + + if (!kva->next) + break; + + kva = pa2kva(va2pa(kva->next, kva)); + data_kva = kva2data_kva(kva); + } + } + + skb->dev = dev; + skb->ip_summed = CHECKSUM_UNNECESSARY; + + kni->stats.rx_bytes += len; + kni->stats.rx_packets++; + + /* call tx interface */ + kni_net_tx(skb, dev); + } + + /* enqueue all the mbufs from rx_q into free_q */ + ret = kni_fifo_put(kni->free_q, kni->va, num); + if (ret != num) + /* Failing should not happen */ + pr_err("Fail to enqueue mbufs into free_q\n"); +} + +/* rx interface */ +void +kni_net_rx(struct kni_dev *kni) +{ + /** + * It doesn't need to check if it is NULL pointer, + * as it has a default value + */ + (*kni_net_rx_func)(kni); +} + +/* + * Deal with a transmit timeout. + */ +static void +kni_net_tx_timeout(struct net_device *dev) +{ + struct kni_dev *kni = netdev_priv(dev); + + pr_debug("Transmit timeout at %ld, latency %ld\n", jiffies, + jiffies - dev_trans_start(dev)); + + kni->stats.tx_errors++; + netif_wake_queue(dev); +} + +/* + * Ioctl commands + */ +static int +kni_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + pr_debug("kni_net_ioctl group:%d cmd:%d\n", + ((struct kni_dev *)netdev_priv(dev))->group_id, cmd); + + return 0; +} + +static void +kni_net_set_rx_mode(struct net_device *dev) +{ +} + +static int +kni_net_change_mtu(struct net_device *dev, int new_mtu) +{ + int ret; + struct rte_kni_request req; + struct kni_dev *kni = netdev_priv(dev); + + pr_debug("kni_net_change_mtu new mtu %d to be set\n", new_mtu); + + memset(&req, 0, sizeof(req)); + req.req_id = RTE_KNI_REQ_CHANGE_MTU; + req.new_mtu = new_mtu; + ret = kni_net_process_request(kni, &req); + if (ret == 0 && req.result == 0) + dev->mtu = new_mtu; + + return (ret == 0) ? req.result : ret; +} + +static void +kni_net_set_promiscusity(struct net_device *netdev, int flags) +{ + struct rte_kni_request req; + struct kni_dev *kni = netdev_priv(netdev); + + memset(&req, 0, sizeof(req)); + req.req_id = RTE_KNI_REQ_CHANGE_PROMISC; + + if (netdev->flags & IFF_PROMISC) + req.promiscusity = 1; + else + req.promiscusity = 0; + kni_net_process_request(kni, &req); +} + +/* + * Checks if the user space application provided the resp message + */ +void +kni_net_poll_resp(struct kni_dev *kni) +{ + if (kni_fifo_count(kni->resp_q)) + wake_up_interruptible(&kni->wq); +} + +/* + * Return statistics to the caller + */ +static struct net_device_stats * +kni_net_stats(struct net_device *dev) +{ + struct kni_dev *kni = netdev_priv(dev); + + return &kni->stats; +} + +/* + * Fill the eth header + */ +static int +kni_net_header(struct sk_buff *skb, struct net_device *dev, + unsigned short type, const void *daddr, + const void *saddr, uint32_t len) +{ + struct ethhdr *eth = (struct ethhdr *) skb_push(skb, ETH_HLEN); + + memcpy(eth->h_source, saddr ? saddr : dev->dev_addr, dev->addr_len); + memcpy(eth->h_dest, daddr ? daddr : dev->dev_addr, dev->addr_len); + eth->h_proto = htons(type); + + return dev->hard_header_len; +} + +/* + * Re-fill the eth header + */ +#ifdef HAVE_REBUILD_HEADER +static int +kni_net_rebuild_header(struct sk_buff *skb) +{ + struct net_device *dev = skb->dev; + struct ethhdr *eth = (struct ethhdr *) skb->data; + + memcpy(eth->h_source, dev->dev_addr, dev->addr_len); + memcpy(eth->h_dest, dev->dev_addr, dev->addr_len); + + return 0; +} +#endif /* < 4.1.0 */ + +/** + * kni_net_set_mac - Change the Ethernet Address of the KNI NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ +static int +kni_net_set_mac(struct net_device *netdev, void *p) +{ + int ret; + struct rte_kni_request req; + struct kni_dev *kni; + struct sockaddr *addr = p; + + memset(&req, 0, sizeof(req)); + req.req_id = RTE_KNI_REQ_CHANGE_MAC_ADDR; + + if (!is_valid_ether_addr((unsigned char *)(addr->sa_data))) + return -EADDRNOTAVAIL; + + memcpy(req.mac_addr, addr->sa_data, netdev->addr_len); + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + + kni = netdev_priv(netdev); + ret = kni_net_process_request(kni, &req); + + return (ret == 0 ? req.result : ret); +} + +#ifdef HAVE_CHANGE_CARRIER_CB +static int +kni_net_change_carrier(struct net_device *dev, bool new_carrier) +{ + if (new_carrier) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + return 0; +} +#endif + +static const struct header_ops kni_net_header_ops = { + .create = kni_net_header, +#ifdef HAVE_REBUILD_HEADER + .rebuild = kni_net_rebuild_header, +#endif /* < 4.1.0 */ + .cache = NULL, /* disable caching */ +}; + +static const struct net_device_ops kni_net_netdev_ops = { + .ndo_open = kni_net_open, + .ndo_stop = kni_net_release, + .ndo_set_config = kni_net_config, + .ndo_change_rx_flags = kni_net_set_promiscusity, + .ndo_start_xmit = kni_net_tx, + .ndo_change_mtu = kni_net_change_mtu, + .ndo_do_ioctl = kni_net_ioctl, + .ndo_set_rx_mode = kni_net_set_rx_mode, + .ndo_get_stats = kni_net_stats, + .ndo_tx_timeout = kni_net_tx_timeout, + .ndo_set_mac_address = kni_net_set_mac, +#ifdef HAVE_CHANGE_CARRIER_CB + .ndo_change_carrier = kni_net_change_carrier, +#endif +}; + +void +kni_net_init(struct net_device *dev) +{ + struct kni_dev *kni = netdev_priv(dev); + + init_waitqueue_head(&kni->wq); + mutex_init(&kni->sync_lock); + + ether_setup(dev); /* assign some of the fields */ + dev->netdev_ops = &kni_net_netdev_ops; + dev->header_ops = &kni_net_header_ops; + dev->watchdog_timeo = WD_TIMEOUT; +} + +void +kni_net_config_lo_mode(char *lo_str) +{ + if (!lo_str) { + pr_debug("loopback disabled"); + return; + } + + if (!strcmp(lo_str, "lo_mode_none")) + pr_debug("loopback disabled"); + else if (!strcmp(lo_str, "lo_mode_fifo")) { + pr_debug("loopback mode=lo_mode_fifo enabled"); + kni_net_rx_func = kni_net_rx_lo_fifo; + } else if (!strcmp(lo_str, "lo_mode_fifo_skb")) { + pr_debug("loopback mode=lo_mode_fifo_skb enabled"); + kni_net_rx_func = kni_net_rx_lo_fifo_skb; + } else + pr_debug("Incognizant parameter, loopback disabled"); +} diff --git a/kernel/linux/meson.build b/kernel/linux/meson.build new file mode 100644 index 00000000..a924c7b6 --- /dev/null +++ b/kernel/linux/meson.build @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(c) 2018 Intel Corporation + +subdirs = ['igb_uio'] + +WARN_CROSS_COMPILE='Need "kernel_dir" option for kmod compilation when cross-compiling' +WARN_NO_HEADERS='Cannot compile kernel modules as requested - are kernel headers installed?' + +# if we are cross-compiling we need kernel_dir specified +# NOTE: warning() function only available from version 0.44 onwards +if get_option('kernel_dir') == '' and meson.is_cross_build() + if meson.version().version_compare('>=0.44') + warning(WARN_CROSS_COMPILE) + else + message('WARNING: ' + WARN_CROSS_COMPILE) + endif +else + + kernel_dir = get_option('kernel_dir') + if kernel_dir == '' + # use default path for native builds + kernel_version = run_command('uname', '-r').stdout().strip() + kernel_dir = '/lib/modules/' + kernel_version + '/build' + endif + + # test running make in kernel directory, using "make kernelversion" + make_returncode = run_command('make', '-sC', kernel_dir, + 'kernelversion').returncode() + if make_returncode != 0 + if meson.version().version_compare('>=0.44') + warning(WARN_NO_HEADERS) + else + message('WARNING: ' + WARN_NO_HEADERS) + endif + else # returncode == 0 + +# DO ACTUAL MODULE BUILDING + foreach d:subdirs + subdir(d) + endforeach + endif +endif |