3 files changed, 116 insertions, 2 deletions

diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
index 876ba381..b0d0c3c6 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -623,7 +623,6 @@ pci_ioport_map(struct rte_pci_device *dev, int bar __rte_unused,
 	if (!found)
 		return -1;
 
-	dev->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
 	p->base = start;
 	RTE_LOG(DEBUG, EAL, "PCI Port IO found start=0x%x\n", start);
 
diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.c b/lib/librte_eal/linuxapp/eal/eal_vfio.c
index 702f7a2e..dd451071 100644
--- a/lib/librte_eal/linuxapp/eal/eal_vfio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_vfio.c
@@ -50,12 +50,15 @@
 static struct vfio_config vfio_cfg;
 
 static int vfio_type1_dma_map(int);
+static int vfio_spapr_dma_map(int);
 static int vfio_noiommu_dma_map(int);
 
 /* IOMMU types we support */
 static const struct vfio_iommu_type iommu_types[] = {
 	/* x86 IOMMU, otherwise known as type 1 */
 	{ RTE_VFIO_TYPE1, "Type 1", &vfio_type1_dma_map},
+	/* ppc64 IOMMU, otherwise known as spapr */
+	{ RTE_VFIO_SPAPR, "sPAPR", &vfio_spapr_dma_map},
 	/* IOMMU-less mode */
 	{ RTE_VFIO_NOIOMMU, "No-IOMMU", &vfio_noiommu_dma_map},
 };
@@ -339,7 +342,7 @@ vfio_enable(const char *modname)
 int
 vfio_is_enabled(const char *modname)
 {
-	const int mod_available = rte_eal_check_module(modname);
+	const int mod_available = rte_eal_check_module(modname) > 0;
 	return vfio_cfg.vfio_enabled && mod_available;
 }
 
@@ -540,6 +543,93 @@ vfio_type1_dma_map(int vfio_container_fd)
 }
 
 static int
+vfio_spapr_dma_map(int vfio_container_fd)
+{
+	const struct rte_memseg *ms = rte_eal_get_physmem_layout();
+	int i, ret;
+
+	struct vfio_iommu_spapr_register_memory reg = {
+		.argsz = sizeof(reg),
+		.flags = 0
+	};
+	struct vfio_iommu_spapr_tce_info info = {
+		.argsz = sizeof(info),
+	};
+	struct vfio_iommu_spapr_tce_create create = {
+		.argsz = sizeof(create),
+	};
+	struct vfio_iommu_spapr_tce_remove remove = {
+		.argsz = sizeof(remove),
+	};
+
+	/* query spapr iommu info */
+	ret = ioctl(vfio_container_fd, VFIO_IOMMU_SPAPR_TCE_GET_INFO, &info);
+	if (ret) {
+		RTE_LOG(ERR, EAL, "  cannot get iommu info, "
+				"error %i (%s)\n", errno, strerror(errno));
+		return -1;
+	}
+
+	/* remove default DMA of 32 bit window */
+	remove.start_addr = info.dma32_window_start;
+	ret = ioctl(vfio_container_fd, VFIO_IOMMU_SPAPR_TCE_REMOVE, &remove);
+	if (ret) {
+		RTE_LOG(ERR, EAL, "  cannot remove default DMA window, "
+				"error %i (%s)\n", errno, strerror(errno));
+		return -1;
+	}
+
+	/* calculate window size based on number of hugepages configured */
+	create.window_size = rte_eal_get_physmem_size();
+	create.page_shift = __builtin_ctzll(ms->hugepage_sz);
+	create.levels = 2;
+
+	ret = ioctl(vfio_container_fd, VFIO_IOMMU_SPAPR_TCE_CREATE, &create);
+	if (ret) {
+		RTE_LOG(ERR, EAL, "  cannot create new DMA window, "
+				"error %i (%s)\n", errno, strerror(errno));
+		return -1;
+	}
+
+	/* map all DPDK segments for DMA. use 1:1 PA to IOVA mapping */
+	for (i = 0; i < RTE_MAX_MEMSEG; i++) {
+		struct vfio_iommu_type1_dma_map dma_map;
+
+		if (ms[i].addr == NULL)
+			break;
+
+		reg.vaddr = (uintptr_t) ms[i].addr;
+		reg.size = ms[i].len;
+		ret = ioctl(vfio_container_fd,
+			VFIO_IOMMU_SPAPR_REGISTER_MEMORY, &reg);
+		if (ret) {
+			RTE_LOG(ERR, EAL, "  cannot register vaddr for IOMMU, "
+				"error %i (%s)\n", errno, strerror(errno));
+			return -1;
+		}
+
+		memset(&dma_map, 0, sizeof(dma_map));
+		dma_map.argsz = sizeof(struct vfio_iommu_type1_dma_map);
+		dma_map.vaddr = ms[i].addr_64;
+		dma_map.size = ms[i].len;
+		dma_map.iova = ms[i].phys_addr;
+		dma_map.flags = VFIO_DMA_MAP_FLAG_READ |
+				 VFIO_DMA_MAP_FLAG_WRITE;
+
+		ret = ioctl(vfio_container_fd, VFIO_IOMMU_MAP_DMA, &dma_map);
+
+		if (ret) {
+			RTE_LOG(ERR, EAL, "  cannot set up DMA remapping, "
+				"error %i (%s)\n", errno, strerror(errno));
+			return -1;
+		}
+
+	}
+
+	return 0;
+}
+
+static int
 vfio_noiommu_dma_map(int __rte_unused vfio_container_fd)
 {
 	/* No-IOMMU mode does not need DMA mapping */
diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.h b/lib/librte_eal/linuxapp/eal/eal_vfio.h
index 29f7f3ec..ac31a4fc 100644
--- a/lib/librte_eal/linuxapp/eal/eal_vfio.h
+++ b/lib/librte_eal/linuxapp/eal/eal_vfio.h
@@ -54,6 +54,31 @@
 
 #define RTE_VFIO_TYPE1 VFIO_TYPE1_IOMMU
 
+#ifndef VFIO_SPAPR_TCE_v2_IOMMU
+#define RTE_VFIO_SPAPR 7
+#define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 17)
+#define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE + 19)
+#define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20)
+struct vfio_iommu_spapr_register_memory {
+	uint32_t argsz;
+	uint32_t flags;
+	uint64_t vaddr;
+	uint64_t size;
+};
+struct vfio_iommu_spapr_tce_create {
+	uint32_t argsz;
+	uint32_t page_shift;
+	uint64_t window_size;
+	uint32_t levels;
+};
+struct vfio_iommu_spapr_tce_remove {
+	uint32_t argsz;
+	uint64_t start_addr;
+};
+#else
+#define RTE_VFIO_SPAPR VFIO_SPAPR_TCE_v2_IOMMU
+#endif
+
 #if LINUX_VERSION_CODE < KERNEL_VERSION(4, 5, 0)
 #define RTE_VFIO_NOIOMMU 8
 #else