diff options
Diffstat (limited to 'lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c')
-rw-r--r-- | lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c | 10344 |
1 files changed, 0 insertions, 10344 deletions
diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c deleted file mode 100644 index af378d2f..00000000 --- a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_main.c +++ /dev/null @@ -1,10344 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - Contact Information: - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/vmalloc.h> -#include <linux/pagemap.h> -#include <linux/netdevice.h> -#include <linux/tcp.h> -#ifdef NETIF_F_TSO -#include <net/checksum.h> -#ifdef NETIF_F_TSO6 -#include <linux/ipv6.h> -#include <net/ip6_checksum.h> -#endif -#endif -#ifdef SIOCGMIIPHY -#include <linux/mii.h> -#endif -#ifdef SIOCETHTOOL -#include <linux/ethtool.h> -#endif -#include <linux/if_vlan.h> -#ifdef CONFIG_PM_RUNTIME -#include <linux/pm_runtime.h> -#endif /* CONFIG_PM_RUNTIME */ - -#include <linux/if_bridge.h> -#include "igb.h" -#include "igb_vmdq.h" - -#include <linux/uio_driver.h> - -#if defined(DEBUG) || defined (DEBUG_DUMP) || defined (DEBUG_ICR) || defined(DEBUG_ITR) -#define DRV_DEBUG "_debug" -#else -#define DRV_DEBUG -#endif -#define DRV_HW_PERF -#define VERSION_SUFFIX - -#define MAJ 5 -#define MIN 0 -#define BUILD 6 -#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." __stringify(BUILD) VERSION_SUFFIX DRV_DEBUG DRV_HW_PERF - -char igb_driver_name[] = "igb"; -char igb_driver_version[] = DRV_VERSION; -static const char igb_driver_string[] = - "Intel(R) Gigabit Ethernet Network Driver"; -static const char igb_copyright[] = - "Copyright (c) 2007-2013 Intel Corporation."; - -const struct pci_device_id igb_pci_tbl[] = { - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_1GBPS) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_SGMII) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_FIBER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SGMII) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_COPPER_FLASHLESS) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I210_SERDES_FLASHLESS) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I211_COPPER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES) }, - { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER) }, - /* required last entry */ - {0, } -}; - -//MODULE_DEVICE_TABLE(pci, igb_pci_tbl); -static void igb_set_sriov_capability(struct igb_adapter *adapter) __attribute__((__unused__)); -void igb_reset(struct igb_adapter *); -static int igb_setup_all_tx_resources(struct igb_adapter *); -static int igb_setup_all_rx_resources(struct igb_adapter *); -static void igb_free_all_tx_resources(struct igb_adapter *); -static void igb_free_all_rx_resources(struct igb_adapter *); -static void igb_setup_mrqc(struct igb_adapter *); -void igb_update_stats(struct igb_adapter *); -static int igb_probe(struct pci_dev *, const struct pci_device_id *); -static void __devexit igb_remove(struct pci_dev *pdev); -static int igb_sw_init(struct igb_adapter *); -static int igb_open(struct net_device *); -static int igb_close(struct net_device *); -static void igb_configure(struct igb_adapter *); -static void igb_configure_tx(struct igb_adapter *); -static void igb_configure_rx(struct igb_adapter *); -static void igb_clean_all_tx_rings(struct igb_adapter *); -static void igb_clean_all_rx_rings(struct igb_adapter *); -static void igb_clean_tx_ring(struct igb_ring *); -static void igb_set_rx_mode(struct net_device *); -#ifdef HAVE_TIMER_SETUP -static void igb_update_phy_info(struct timer_list *); -static void igb_watchdog(struct timer_list *); -#else -static void igb_update_phy_info(unsigned long); -static void igb_watchdog(unsigned long); -#endif -static void igb_watchdog_task(struct work_struct *); -static void igb_dma_err_task(struct work_struct *); -#ifdef HAVE_TIMER_SETUP -static void igb_dma_err_timer(struct timer_list *); -#else -static void igb_dma_err_timer(unsigned long data); -#endif -static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, struct net_device *); -static struct net_device_stats *igb_get_stats(struct net_device *); -static int igb_change_mtu(struct net_device *, int); -void igb_full_sync_mac_table(struct igb_adapter *adapter); -static int igb_set_mac(struct net_device *, void *); -static void igb_set_uta(struct igb_adapter *adapter); -static irqreturn_t igb_intr(int irq, void *); -static irqreturn_t igb_intr_msi(int irq, void *); -static irqreturn_t igb_msix_other(int irq, void *); -static irqreturn_t igb_msix_ring(int irq, void *); -#ifdef IGB_DCA -static void igb_update_dca(struct igb_q_vector *); -static void igb_setup_dca(struct igb_adapter *); -#endif /* IGB_DCA */ -static int igb_poll(struct napi_struct *, int); -static bool igb_clean_tx_irq(struct igb_q_vector *); -static bool igb_clean_rx_irq(struct igb_q_vector *, int); -static int igb_ioctl(struct net_device *, struct ifreq *, int cmd); -static void igb_tx_timeout(struct net_device *); -static void igb_reset_task(struct work_struct *); -#ifdef HAVE_VLAN_RX_REGISTER -static void igb_vlan_mode(struct net_device *, struct vlan_group *); -#endif -#ifdef HAVE_VLAN_PROTOCOL -static int igb_vlan_rx_add_vid(struct net_device *, - __be16 proto, u16); -static int igb_vlan_rx_kill_vid(struct net_device *, - __be16 proto, u16); -#elif defined HAVE_INT_NDO_VLAN_RX_ADD_VID -#ifdef NETIF_F_HW_VLAN_CTAG_RX -static int igb_vlan_rx_add_vid(struct net_device *, - __always_unused __be16 proto, u16); -static int igb_vlan_rx_kill_vid(struct net_device *, - __always_unused __be16 proto, u16); -#else -static int igb_vlan_rx_add_vid(struct net_device *, u16); -static int igb_vlan_rx_kill_vid(struct net_device *, u16); -#endif -#else -static void igb_vlan_rx_add_vid(struct net_device *, u16); -static void igb_vlan_rx_kill_vid(struct net_device *, u16); -#endif -static void igb_restore_vlan(struct igb_adapter *); -void igb_rar_set(struct igb_adapter *adapter, u32 index); -static void igb_ping_all_vfs(struct igb_adapter *); -static void igb_msg_task(struct igb_adapter *); -static void igb_vmm_control(struct igb_adapter *); -static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *); -static void igb_restore_vf_multicasts(struct igb_adapter *adapter); -static void igb_process_mdd_event(struct igb_adapter *); -#ifdef IFLA_VF_MAX -static int igb_ndo_set_vf_mac( struct net_device *netdev, int vf, u8 *mac); -static int igb_ndo_set_vf_vlan(struct net_device *netdev, -#ifdef HAVE_VF_VLAN_PROTO - int vf, u16 vlan, u8 qos, __be16 vlan_proto); -#else - int vf, u16 vlan, u8 qos); -#endif -#ifdef HAVE_VF_SPOOFCHK_CONFIGURE -static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, - bool setting); -#endif -#ifdef HAVE_VF_MIN_MAX_TXRATE -static int igb_ndo_set_vf_bw(struct net_device *, int, int, int); -#else /* HAVE_VF_MIN_MAX_TXRATE */ -static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate); -#endif /* HAVE_VF_MIN_MAX_TXRATE */ -static int igb_ndo_get_vf_config(struct net_device *netdev, int vf, - struct ifla_vf_info *ivi); -static void igb_check_vf_rate_limit(struct igb_adapter *); -#endif -static int igb_vf_configure(struct igb_adapter *adapter, int vf); -#ifdef CONFIG_PM -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS -static int igb_suspend(struct device *dev); -static int igb_resume(struct device *dev); -#ifdef CONFIG_PM_RUNTIME -static int igb_runtime_suspend(struct device *dev); -static int igb_runtime_resume(struct device *dev); -static int igb_runtime_idle(struct device *dev); -#endif /* CONFIG_PM_RUNTIME */ -static const struct dev_pm_ops igb_pm_ops = { -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34) - .suspend = igb_suspend, - .resume = igb_resume, - .freeze = igb_suspend, - .thaw = igb_resume, - .poweroff = igb_suspend, - .restore = igb_resume, -#ifdef CONFIG_PM_RUNTIME - .runtime_suspend = igb_runtime_suspend, - .runtime_resume = igb_runtime_resume, - .runtime_idle = igb_runtime_idle, -#endif -#else /* Linux >= 2.6.34 */ - SET_SYSTEM_SLEEP_PM_OPS(igb_suspend, igb_resume) -#ifdef CONFIG_PM_RUNTIME - SET_RUNTIME_PM_OPS(igb_runtime_suspend, igb_runtime_resume, - igb_runtime_idle) -#endif /* CONFIG_PM_RUNTIME */ -#endif /* Linux version */ -}; -#else -static int igb_suspend(struct pci_dev *pdev, pm_message_t state); -static int igb_resume(struct pci_dev *pdev); -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ -#endif /* CONFIG_PM */ -#ifndef USE_REBOOT_NOTIFIER -static void igb_shutdown(struct pci_dev *); -#else -static int igb_notify_reboot(struct notifier_block *, unsigned long, void *); -static struct notifier_block igb_notifier_reboot = { - .notifier_call = igb_notify_reboot, - .next = NULL, - .priority = 0 -}; -#endif -#ifdef IGB_DCA -static int igb_notify_dca(struct notifier_block *, unsigned long, void *); -static struct notifier_block dca_notifier = { - .notifier_call = igb_notify_dca, - .next = NULL, - .priority = 0 -}; -#endif -#ifdef CONFIG_NET_POLL_CONTROLLER -/* for netdump / net console */ -static void igb_netpoll(struct net_device *); -#endif - -#ifdef HAVE_PCI_ERS -static pci_ers_result_t igb_io_error_detected(struct pci_dev *, - pci_channel_state_t); -static pci_ers_result_t igb_io_slot_reset(struct pci_dev *); -static void igb_io_resume(struct pci_dev *); - -static struct pci_error_handlers igb_err_handler = { - .error_detected = igb_io_error_detected, - .slot_reset = igb_io_slot_reset, - .resume = igb_io_resume, -}; -#endif - -static void igb_init_fw(struct igb_adapter *adapter); -static void igb_init_dmac(struct igb_adapter *adapter, u32 pba); - -static struct pci_driver igb_driver = { - .name = igb_driver_name, - .id_table = igb_pci_tbl, - .probe = igb_probe, - .remove = __devexit_p(igb_remove), -#ifdef CONFIG_PM -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS - .driver.pm = &igb_pm_ops, -#else - .suspend = igb_suspend, - .resume = igb_resume, -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ -#endif /* CONFIG_PM */ -#ifndef USE_REBOOT_NOTIFIER - .shutdown = igb_shutdown, -#endif -#ifdef HAVE_PCI_ERS - .err_handler = &igb_err_handler -#endif -}; - -//MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>"); -//MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver"); -//MODULE_LICENSE("GPL"); -//MODULE_VERSION(DRV_VERSION); - -static void igb_vfta_set(struct igb_adapter *adapter, u32 vid, bool add) -{ - struct e1000_hw *hw = &adapter->hw; - struct e1000_host_mng_dhcp_cookie *mng_cookie = &hw->mng_cookie; - u32 index = (vid >> E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK; - u32 mask = 1 << (vid & E1000_VFTA_ENTRY_BIT_SHIFT_MASK); - u32 vfta; - - /* - * if this is the management vlan the only option is to add it in so - * that the management pass through will continue to work - */ - if ((mng_cookie->status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && - (vid == mng_cookie->vlan_id)) - add = TRUE; - - vfta = adapter->shadow_vfta[index]; - - if (add) - vfta |= mask; - else - vfta &= ~mask; - - e1000_write_vfta(hw, index, vfta); - adapter->shadow_vfta[index] = vfta; -} - -static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE; -//module_param(debug, int, 0); -//MODULE_PARM_DESC(debug, "Debug level (0=none, ..., 16=all)"); - -/** - * igb_init_module - Driver Registration Routine - * - * igb_init_module is the first routine called when the driver is - * loaded. All it does is register with the PCI subsystem. - **/ -static int __init igb_init_module(void) -{ - int ret; - - printk(KERN_INFO "%s - version %s\n", - igb_driver_string, igb_driver_version); - - printk(KERN_INFO "%s\n", igb_copyright); -#ifdef IGB_HWMON -/* only use IGB_PROCFS if IGB_HWMON is not defined */ -#else -#ifdef IGB_PROCFS - if (igb_procfs_topdir_init()) - printk(KERN_INFO "Procfs failed to initialize topdir\n"); -#endif /* IGB_PROCFS */ -#endif /* IGB_HWMON */ - -#ifdef IGB_DCA - dca_register_notify(&dca_notifier); -#endif - ret = pci_register_driver(&igb_driver); -#ifdef USE_REBOOT_NOTIFIER - if (ret >= 0) { - register_reboot_notifier(&igb_notifier_reboot); - } -#endif - return ret; -} - -#undef module_init -#define module_init(x) static int x(void) __attribute__((__unused__)); -module_init(igb_init_module); - -/** - * igb_exit_module - Driver Exit Cleanup Routine - * - * igb_exit_module is called just before the driver is removed - * from memory. - **/ -static void __exit igb_exit_module(void) -{ -#ifdef IGB_DCA - dca_unregister_notify(&dca_notifier); -#endif -#ifdef USE_REBOOT_NOTIFIER - unregister_reboot_notifier(&igb_notifier_reboot); -#endif - pci_unregister_driver(&igb_driver); - -#ifdef IGB_HWMON -/* only compile IGB_PROCFS if IGB_HWMON is not defined */ -#else -#ifdef IGB_PROCFS - igb_procfs_topdir_exit(); -#endif /* IGB_PROCFS */ -#endif /* IGB_HWMON */ -} - -#undef module_exit -#define module_exit(x) static void x(void) __attribute__((__unused__)); -module_exit(igb_exit_module); - -#define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1)) -/** - * igb_cache_ring_register - Descriptor ring to register mapping - * @adapter: board private structure to initialize - * - * Once we know the feature-set enabled for the device, we'll cache - * the register offset the descriptor ring is assigned to. - **/ -static void igb_cache_ring_register(struct igb_adapter *adapter) -{ - int i = 0, j = 0; - u32 rbase_offset = adapter->vfs_allocated_count; - - switch (adapter->hw.mac.type) { - case e1000_82576: - /* The queues are allocated for virtualization such that VF 0 - * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc. - * In order to avoid collision we start at the first free queue - * and continue consuming queues in the same sequence - */ - if ((adapter->rss_queues > 1) && adapter->vmdq_pools) { - for (; i < adapter->rss_queues; i++) - adapter->rx_ring[i]->reg_idx = rbase_offset + - Q_IDX_82576(i); - } - case e1000_82575: - case e1000_82580: - case e1000_i350: - case e1000_i354: - case e1000_i210: - case e1000_i211: - default: - for (; i < adapter->num_rx_queues; i++) - adapter->rx_ring[i]->reg_idx = rbase_offset + i; - for (; j < adapter->num_tx_queues; j++) - adapter->tx_ring[j]->reg_idx = rbase_offset + j; - break; - } -} - -static void igb_configure_lli(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u16 port; - - /* LLI should only be enabled for MSI-X or MSI interrupts */ - if (!adapter->msix_entries && !(adapter->flags & IGB_FLAG_HAS_MSI)) - return; - - if (adapter->lli_port) { - /* use filter 0 for port */ - port = htons((u16)adapter->lli_port); - E1000_WRITE_REG(hw, E1000_IMIR(0), - (port | E1000_IMIR_PORT_IM_EN)); - E1000_WRITE_REG(hw, E1000_IMIREXT(0), - (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP)); - } - - if (adapter->flags & IGB_FLAG_LLI_PUSH) { - /* use filter 1 for push flag */ - E1000_WRITE_REG(hw, E1000_IMIR(1), - (E1000_IMIR_PORT_BP | E1000_IMIR_PORT_IM_EN)); - E1000_WRITE_REG(hw, E1000_IMIREXT(1), - (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_PSH)); - } - - if (adapter->lli_size) { - /* use filter 2 for size */ - E1000_WRITE_REG(hw, E1000_IMIR(2), - (E1000_IMIR_PORT_BP | E1000_IMIR_PORT_IM_EN)); - E1000_WRITE_REG(hw, E1000_IMIREXT(2), - (adapter->lli_size | E1000_IMIREXT_CTRL_BP)); - } - -} - -/** - * igb_write_ivar - configure ivar for given MSI-X vector - * @hw: pointer to the HW structure - * @msix_vector: vector number we are allocating to a given ring - * @index: row index of IVAR register to write within IVAR table - * @offset: column offset of in IVAR, should be multiple of 8 - * - * This function is intended to handle the writing of the IVAR register - * for adapters 82576 and newer. The IVAR table consists of 2 columns, - * each containing an cause allocation for an Rx and Tx ring, and a - * variable number of rows depending on the number of queues supported. - **/ -static void igb_write_ivar(struct e1000_hw *hw, int msix_vector, - int index, int offset) -{ - u32 ivar = E1000_READ_REG_ARRAY(hw, E1000_IVAR0, index); - - /* clear any bits that are currently set */ - ivar &= ~((u32)0xFF << offset); - - /* write vector and valid bit */ - ivar |= (msix_vector | E1000_IVAR_VALID) << offset; - - E1000_WRITE_REG_ARRAY(hw, E1000_IVAR0, index, ivar); -} - -#define IGB_N0_QUEUE -1 -static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector) -{ - struct igb_adapter *adapter = q_vector->adapter; - struct e1000_hw *hw = &adapter->hw; - int rx_queue = IGB_N0_QUEUE; - int tx_queue = IGB_N0_QUEUE; - u32 msixbm = 0; - - if (q_vector->rx.ring) - rx_queue = q_vector->rx.ring->reg_idx; - if (q_vector->tx.ring) - tx_queue = q_vector->tx.ring->reg_idx; - - switch (hw->mac.type) { - case e1000_82575: - /* The 82575 assigns vectors using a bitmask, which matches the - bitmask for the EICR/EIMS/EIMC registers. To assign one - or more queues to a vector, we write the appropriate bits - into the MSIXBM register for that vector. */ - if (rx_queue > IGB_N0_QUEUE) - msixbm = E1000_EICR_RX_QUEUE0 << rx_queue; - if (tx_queue > IGB_N0_QUEUE) - msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue; - if (!adapter->msix_entries && msix_vector == 0) - msixbm |= E1000_EIMS_OTHER; - E1000_WRITE_REG_ARRAY(hw, E1000_MSIXBM(0), msix_vector, msixbm); - q_vector->eims_value = msixbm; - break; - case e1000_82576: - /* - * 82576 uses a table that essentially consists of 2 columns - * with 8 rows. The ordering is column-major so we use the - * lower 3 bits as the row index, and the 4th bit as the - * column offset. - */ - if (rx_queue > IGB_N0_QUEUE) - igb_write_ivar(hw, msix_vector, - rx_queue & 0x7, - (rx_queue & 0x8) << 1); - if (tx_queue > IGB_N0_QUEUE) - igb_write_ivar(hw, msix_vector, - tx_queue & 0x7, - ((tx_queue & 0x8) << 1) + 8); - q_vector->eims_value = 1 << msix_vector; - break; - case e1000_82580: - case e1000_i350: - case e1000_i354: - case e1000_i210: - case e1000_i211: - /* - * On 82580 and newer adapters the scheme is similar to 82576 - * however instead of ordering column-major we have things - * ordered row-major. So we traverse the table by using - * bit 0 as the column offset, and the remaining bits as the - * row index. - */ - if (rx_queue > IGB_N0_QUEUE) - igb_write_ivar(hw, msix_vector, - rx_queue >> 1, - (rx_queue & 0x1) << 4); - if (tx_queue > IGB_N0_QUEUE) - igb_write_ivar(hw, msix_vector, - tx_queue >> 1, - ((tx_queue & 0x1) << 4) + 8); - q_vector->eims_value = 1 << msix_vector; - break; - default: - BUG(); - break; - } - - /* add q_vector eims value to global eims_enable_mask */ - adapter->eims_enable_mask |= q_vector->eims_value; - - /* configure q_vector to set itr on first interrupt */ - q_vector->set_itr = 1; -} - -/** - * igb_configure_msix - Configure MSI-X hardware - * - * igb_configure_msix sets up the hardware to properly - * generate MSI-X interrupts. - **/ -static void igb_configure_msix(struct igb_adapter *adapter) -{ - u32 tmp; - int i, vector = 0; - struct e1000_hw *hw = &adapter->hw; - - adapter->eims_enable_mask = 0; - - /* set vector for other causes, i.e. link changes */ - switch (hw->mac.type) { - case e1000_82575: - tmp = E1000_READ_REG(hw, E1000_CTRL_EXT); - /* enable MSI-X PBA support*/ - tmp |= E1000_CTRL_EXT_PBA_CLR; - - /* Auto-Mask interrupts upon ICR read. */ - tmp |= E1000_CTRL_EXT_EIAME; - tmp |= E1000_CTRL_EXT_IRCA; - - E1000_WRITE_REG(hw, E1000_CTRL_EXT, tmp); - - /* enable msix_other interrupt */ - E1000_WRITE_REG_ARRAY(hw, E1000_MSIXBM(0), vector++, - E1000_EIMS_OTHER); - adapter->eims_other = E1000_EIMS_OTHER; - - break; - - case e1000_82576: - case e1000_82580: - case e1000_i350: - case e1000_i354: - case e1000_i210: - case e1000_i211: - /* Turn on MSI-X capability first, or our settings - * won't stick. And it will take days to debug. */ - E1000_WRITE_REG(hw, E1000_GPIE, E1000_GPIE_MSIX_MODE | - E1000_GPIE_PBA | E1000_GPIE_EIAME | - E1000_GPIE_NSICR); - - /* enable msix_other interrupt */ - adapter->eims_other = 1 << vector; - tmp = (vector++ | E1000_IVAR_VALID) << 8; - - E1000_WRITE_REG(hw, E1000_IVAR_MISC, tmp); - break; - default: - /* do nothing, since nothing else supports MSI-X */ - break; - } /* switch (hw->mac.type) */ - - adapter->eims_enable_mask |= adapter->eims_other; - - for (i = 0; i < adapter->num_q_vectors; i++) - igb_assign_vector(adapter->q_vector[i], vector++); - - E1000_WRITE_FLUSH(hw); -} - -/** - * igb_request_msix - Initialize MSI-X interrupts - * - * igb_request_msix allocates MSI-X vectors and requests interrupts from the - * kernel. - **/ -static int igb_request_msix(struct igb_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct e1000_hw *hw = &adapter->hw; - int i, err = 0, vector = 0, free_vector = 0; - - err = request_irq(adapter->msix_entries[vector].vector, - &igb_msix_other, 0, netdev->name, adapter); - if (err) - goto err_out; - - for (i = 0; i < adapter->num_q_vectors; i++) { - struct igb_q_vector *q_vector = adapter->q_vector[i]; - - vector++; - - q_vector->itr_register = hw->hw_addr + E1000_EITR(vector); - - if (q_vector->rx.ring && q_vector->tx.ring) - sprintf(q_vector->name, "%s-TxRx-%u", netdev->name, - q_vector->rx.ring->queue_index); - else if (q_vector->tx.ring) - sprintf(q_vector->name, "%s-tx-%u", netdev->name, - q_vector->tx.ring->queue_index); - else if (q_vector->rx.ring) - sprintf(q_vector->name, "%s-rx-%u", netdev->name, - q_vector->rx.ring->queue_index); - else - sprintf(q_vector->name, "%s-unused", netdev->name); - - err = request_irq(adapter->msix_entries[vector].vector, - igb_msix_ring, 0, q_vector->name, - q_vector); - if (err) - goto err_free; - } - - igb_configure_msix(adapter); - return 0; - -err_free: - /* free already assigned IRQs */ - free_irq(adapter->msix_entries[free_vector++].vector, adapter); - - vector--; - for (i = 0; i < vector; i++) { - free_irq(adapter->msix_entries[free_vector++].vector, - adapter->q_vector[i]); - } -err_out: - return err; -} - -static void igb_reset_interrupt_capability(struct igb_adapter *adapter) -{ - if (adapter->msix_entries) { - pci_disable_msix(adapter->pdev); - kfree(adapter->msix_entries); - adapter->msix_entries = NULL; - } else if (adapter->flags & IGB_FLAG_HAS_MSI) { - pci_disable_msi(adapter->pdev); - } -} - -/** - * igb_free_q_vector - Free memory allocated for specific interrupt vector - * @adapter: board private structure to initialize - * @v_idx: Index of vector to be freed - * - * This function frees the memory allocated to the q_vector. In addition if - * NAPI is enabled it will delete any references to the NAPI struct prior - * to freeing the q_vector. - **/ -static void igb_free_q_vector(struct igb_adapter *adapter, int v_idx) -{ - struct igb_q_vector *q_vector = adapter->q_vector[v_idx]; - - if (q_vector->tx.ring) - adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL; - - if (q_vector->rx.ring) - adapter->tx_ring[q_vector->rx.ring->queue_index] = NULL; - - adapter->q_vector[v_idx] = NULL; - netif_napi_del(&q_vector->napi); -#ifndef IGB_NO_LRO - __skb_queue_purge(&q_vector->lrolist.active); -#endif - kfree(q_vector); -} - -/** - * igb_free_q_vectors - Free memory allocated for interrupt vectors - * @adapter: board private structure to initialize - * - * This function frees the memory allocated to the q_vectors. In addition if - * NAPI is enabled it will delete any references to the NAPI struct prior - * to freeing the q_vector. - **/ -static void igb_free_q_vectors(struct igb_adapter *adapter) -{ - int v_idx = adapter->num_q_vectors; - - adapter->num_tx_queues = 0; - adapter->num_rx_queues = 0; - adapter->num_q_vectors = 0; - - while (v_idx--) - igb_free_q_vector(adapter, v_idx); -} - -/** - * igb_clear_interrupt_scheme - reset the device to a state of no interrupts - * - * This function resets the device so that it has 0 rx queues, tx queues, and - * MSI-X interrupts allocated. - */ -static void igb_clear_interrupt_scheme(struct igb_adapter *adapter) -{ - igb_free_q_vectors(adapter); - igb_reset_interrupt_capability(adapter); -} - -/** - * igb_process_mdd_event - * @adapter - board private structure - * - * Identify a malicious VF, disable the VF TX/RX queues and log a message. - */ -static void igb_process_mdd_event(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 lvmmc, vfte, vfre, mdfb; - u8 vf_queue; - - lvmmc = E1000_READ_REG(hw, E1000_LVMMC); - vf_queue = lvmmc >> 29; - - /* VF index cannot be bigger or equal to VFs allocated */ - if (vf_queue >= adapter->vfs_allocated_count) - return; - - netdev_info(adapter->netdev, - "VF %d misbehaved. VF queues are disabled. " - "VM misbehavior code is 0x%x\n", vf_queue, lvmmc); - - /* Disable VFTE and VFRE related bits */ - vfte = E1000_READ_REG(hw, E1000_VFTE); - vfte &= ~(1 << vf_queue); - E1000_WRITE_REG(hw, E1000_VFTE, vfte); - - vfre = E1000_READ_REG(hw, E1000_VFRE); - vfre &= ~(1 << vf_queue); - E1000_WRITE_REG(hw, E1000_VFRE, vfre); - - /* Disable MDFB related bit. Clear on write */ - mdfb = E1000_READ_REG(hw, E1000_MDFB); - mdfb |= (1 << vf_queue); - E1000_WRITE_REG(hw, E1000_MDFB, mdfb); - - /* Reset the specific VF */ - E1000_WRITE_REG(hw, E1000_VTCTRL(vf_queue), E1000_VTCTRL_RST); -} - -/** - * igb_disable_mdd - * @adapter - board private structure - * - * Disable MDD behavior in the HW - **/ -static void igb_disable_mdd(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 reg; - - if ((hw->mac.type != e1000_i350) || - (hw->mac.type != e1000_i354)) - return; - - reg = E1000_READ_REG(hw, E1000_DTXCTL); - reg &= (~E1000_DTXCTL_MDP_EN); - E1000_WRITE_REG(hw, E1000_DTXCTL, reg); -} - -/** - * igb_enable_mdd - * @adapter - board private structure - * - * Enable the HW to detect malicious driver and sends an interrupt to - * the driver. - **/ -static void igb_enable_mdd(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 reg; - - /* Only available on i350 device */ - if (hw->mac.type != e1000_i350) - return; - - reg = E1000_READ_REG(hw, E1000_DTXCTL); - reg |= E1000_DTXCTL_MDP_EN; - E1000_WRITE_REG(hw, E1000_DTXCTL, reg); -} - -/** - * igb_reset_sriov_capability - disable SR-IOV if enabled - * - * Attempt to disable single root IO virtualization capabilites present in the - * kernel. - **/ -static void igb_reset_sriov_capability(struct igb_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - struct e1000_hw *hw = &adapter->hw; - - /* reclaim resources allocated to VFs */ - if (adapter->vf_data) { - if (!pci_vfs_assigned(pdev)) { - /* - * disable iov and allow time for transactions to - * clear - */ - pci_disable_sriov(pdev); - msleep(500); - - dev_info(pci_dev_to_dev(pdev), "IOV Disabled\n"); - } else { - dev_info(pci_dev_to_dev(pdev), "IOV Not Disabled\n " - "VF(s) are assigned to guests!\n"); - } - /* Disable Malicious Driver Detection */ - igb_disable_mdd(adapter); - - /* free vf data storage */ - kfree(adapter->vf_data); - adapter->vf_data = NULL; - - /* switch rings back to PF ownership */ - E1000_WRITE_REG(hw, E1000_IOVCTL, - E1000_IOVCTL_REUSE_VFQ); - E1000_WRITE_FLUSH(hw); - msleep(100); - } - - adapter->vfs_allocated_count = 0; -} - -/** - * igb_set_sriov_capability - setup SR-IOV if supported - * - * Attempt to enable single root IO virtualization capabilites present in the - * kernel. - **/ -static void igb_set_sriov_capability(struct igb_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - int old_vfs = 0; - int i; - - old_vfs = pci_num_vf(pdev); - if (old_vfs) { - dev_info(pci_dev_to_dev(pdev), - "%d pre-allocated VFs found - override " - "max_vfs setting of %d\n", old_vfs, - adapter->vfs_allocated_count); - adapter->vfs_allocated_count = old_vfs; - } - /* no VFs requested, do nothing */ - if (!adapter->vfs_allocated_count) - return; - - /* allocate vf data storage */ - adapter->vf_data = kcalloc(adapter->vfs_allocated_count, - sizeof(struct vf_data_storage), - GFP_KERNEL); - - if (adapter->vf_data) { - if (!old_vfs) { - if (pci_enable_sriov(pdev, - adapter->vfs_allocated_count)) - goto err_out; - } - for (i = 0; i < adapter->vfs_allocated_count; i++) - igb_vf_configure(adapter, i); - - switch (adapter->hw.mac.type) { - case e1000_82576: - case e1000_i350: - /* Enable VM to VM loopback by default */ - adapter->flags |= IGB_FLAG_LOOPBACK_ENABLE; - break; - default: - /* Currently no other hardware supports loopback */ - break; - } - - /* DMA Coalescing is not supported in IOV mode. */ - if (adapter->hw.mac.type >= e1000_i350) - adapter->dmac = IGB_DMAC_DISABLE; - if (adapter->hw.mac.type < e1000_i350) - adapter->flags |= IGB_FLAG_DETECT_BAD_DMA; - return; - - } - -err_out: - kfree(adapter->vf_data); - adapter->vf_data = NULL; - adapter->vfs_allocated_count = 0; - dev_warn(pci_dev_to_dev(pdev), - "Failed to initialize SR-IOV virtualization\n"); -} - -/** - * igb_set_interrupt_capability - set MSI or MSI-X if supported - * - * Attempt to configure interrupts using the best available - * capabilities of the hardware and kernel. - **/ -static void igb_set_interrupt_capability(struct igb_adapter *adapter, bool msix) -{ - struct pci_dev *pdev = adapter->pdev; - int err; - int numvecs, i; - - if (!msix) - adapter->int_mode = IGB_INT_MODE_MSI; - - /* Number of supported queues. */ - adapter->num_rx_queues = adapter->rss_queues; - - if (adapter->vmdq_pools > 1) - adapter->num_rx_queues += adapter->vmdq_pools - 1; - -#ifdef HAVE_TX_MQ - if (adapter->vmdq_pools) - adapter->num_tx_queues = adapter->vmdq_pools; - else - adapter->num_tx_queues = adapter->num_rx_queues; -#else - adapter->num_tx_queues = max_t(u32, 1, adapter->vmdq_pools); -#endif - - switch (adapter->int_mode) { - case IGB_INT_MODE_MSIX: - /* start with one vector for every rx queue */ - numvecs = adapter->num_rx_queues; - - /* if tx handler is separate add 1 for every tx queue */ - if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) - numvecs += adapter->num_tx_queues; - - /* store the number of vectors reserved for queues */ - adapter->num_q_vectors = numvecs; - - /* add 1 vector for link status interrupts */ - numvecs++; - adapter->msix_entries = kcalloc(numvecs, - sizeof(struct msix_entry), - GFP_KERNEL); - if (adapter->msix_entries) { - for (i = 0; i < numvecs; i++) - adapter->msix_entries[i].entry = i; - -#ifdef HAVE_PCI_ENABLE_MSIX - err = pci_enable_msix(pdev, - adapter->msix_entries, numvecs); -#else - err = pci_enable_msix_range(pdev, - adapter->msix_entries, - numvecs, - numvecs); -#endif - if (err == 0) - break; - } - /* MSI-X failed, so fall through and try MSI */ - dev_warn(pci_dev_to_dev(pdev), "Failed to initialize MSI-X interrupts. " - "Falling back to MSI interrupts.\n"); - igb_reset_interrupt_capability(adapter); - case IGB_INT_MODE_MSI: - if (!pci_enable_msi(pdev)) - adapter->flags |= IGB_FLAG_HAS_MSI; - else - dev_warn(pci_dev_to_dev(pdev), "Failed to initialize MSI " - "interrupts. Falling back to legacy " - "interrupts.\n"); - /* Fall through */ - case IGB_INT_MODE_LEGACY: - /* disable advanced features and set number of queues to 1 */ - igb_reset_sriov_capability(adapter); - adapter->vmdq_pools = 0; - adapter->rss_queues = 1; - adapter->flags |= IGB_FLAG_QUEUE_PAIRS; - adapter->num_rx_queues = 1; - adapter->num_tx_queues = 1; - adapter->num_q_vectors = 1; - /* Don't do anything; this is system default */ - break; - } -} - -static void igb_add_ring(struct igb_ring *ring, - struct igb_ring_container *head) -{ - head->ring = ring; - head->count++; -} - -/** - * igb_alloc_q_vector - Allocate memory for a single interrupt vector - * @adapter: board private structure to initialize - * @v_count: q_vectors allocated on adapter, used for ring interleaving - * @v_idx: index of vector in adapter struct - * @txr_count: total number of Tx rings to allocate - * @txr_idx: index of first Tx ring to allocate - * @rxr_count: total number of Rx rings to allocate - * @rxr_idx: index of first Rx ring to allocate - * - * We allocate one q_vector. If allocation fails we return -ENOMEM. - **/ -static int igb_alloc_q_vector(struct igb_adapter *adapter, - unsigned int v_count, unsigned int v_idx, - unsigned int txr_count, unsigned int txr_idx, - unsigned int rxr_count, unsigned int rxr_idx) -{ - struct igb_q_vector *q_vector; - struct igb_ring *ring; - int ring_count, size; - - /* igb only supports 1 Tx and/or 1 Rx queue per vector */ - if (txr_count > 1 || rxr_count > 1) - return -ENOMEM; - - ring_count = txr_count + rxr_count; - size = sizeof(struct igb_q_vector) + - (sizeof(struct igb_ring) * ring_count); - - /* allocate q_vector and rings */ - q_vector = kzalloc(size, GFP_KERNEL); - if (!q_vector) - return -ENOMEM; - -#ifndef IGB_NO_LRO - /* initialize LRO */ - __skb_queue_head_init(&q_vector->lrolist.active); - -#endif - /* initialize NAPI */ - netif_napi_add(adapter->netdev, &q_vector->napi, - igb_poll, 64); - - /* tie q_vector and adapter together */ - adapter->q_vector[v_idx] = q_vector; - q_vector->adapter = adapter; - - /* initialize work limits */ - q_vector->tx.work_limit = adapter->tx_work_limit; - - /* initialize ITR configuration */ - q_vector->itr_register = adapter->hw.hw_addr + E1000_EITR(0); - q_vector->itr_val = IGB_START_ITR; - - /* initialize pointer to rings */ - ring = q_vector->ring; - - /* initialize ITR */ - if (rxr_count) { - /* rx or rx/tx vector */ - if (!adapter->rx_itr_setting || adapter->rx_itr_setting > 3) - q_vector->itr_val = adapter->rx_itr_setting; - } else { - /* tx only vector */ - if (!adapter->tx_itr_setting || adapter->tx_itr_setting > 3) - q_vector->itr_val = adapter->tx_itr_setting; - } - - if (txr_count) { - /* assign generic ring traits */ - ring->dev = &adapter->pdev->dev; - ring->netdev = adapter->netdev; - - /* configure backlink on ring */ - ring->q_vector = q_vector; - - /* update q_vector Tx values */ - igb_add_ring(ring, &q_vector->tx); - - /* For 82575, context index must be unique per ring. */ - if (adapter->hw.mac.type == e1000_82575) - set_bit(IGB_RING_FLAG_TX_CTX_IDX, &ring->flags); - - /* apply Tx specific ring traits */ - ring->count = adapter->tx_ring_count; - ring->queue_index = txr_idx; - - /* assign ring to adapter */ - adapter->tx_ring[txr_idx] = ring; - - /* push pointer to next ring */ - ring++; - } - - if (rxr_count) { - /* assign generic ring traits */ - ring->dev = &adapter->pdev->dev; - ring->netdev = adapter->netdev; - - /* configure backlink on ring */ - ring->q_vector = q_vector; - - /* update q_vector Rx values */ - igb_add_ring(ring, &q_vector->rx); - -#ifndef HAVE_NDO_SET_FEATURES - /* enable rx checksum */ - set_bit(IGB_RING_FLAG_RX_CSUM, &ring->flags); - -#endif - /* set flag indicating ring supports SCTP checksum offload */ - if (adapter->hw.mac.type >= e1000_82576) - set_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags); - - if ((adapter->hw.mac.type == e1000_i350) || - (adapter->hw.mac.type == e1000_i354)) - set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &ring->flags); - - /* apply Rx specific ring traits */ - ring->count = adapter->rx_ring_count; - ring->queue_index = rxr_idx; - - /* assign ring to adapter */ - adapter->rx_ring[rxr_idx] = ring; - } - - return 0; -} - -/** - * igb_alloc_q_vectors - Allocate memory for interrupt vectors - * @adapter: board private structure to initialize - * - * We allocate one q_vector per queue interrupt. If allocation fails we - * return -ENOMEM. - **/ -static int igb_alloc_q_vectors(struct igb_adapter *adapter) -{ - int q_vectors = adapter->num_q_vectors; - int rxr_remaining = adapter->num_rx_queues; - int txr_remaining = adapter->num_tx_queues; - int rxr_idx = 0, txr_idx = 0, v_idx = 0; - int err; - - if (q_vectors >= (rxr_remaining + txr_remaining)) { - for (; rxr_remaining; v_idx++) { - err = igb_alloc_q_vector(adapter, q_vectors, v_idx, - 0, 0, 1, rxr_idx); - - if (err) - goto err_out; - - /* update counts and index */ - rxr_remaining--; - rxr_idx++; - } - } - - for (; v_idx < q_vectors; v_idx++) { - int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx); - int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx); - err = igb_alloc_q_vector(adapter, q_vectors, v_idx, - tqpv, txr_idx, rqpv, rxr_idx); - - if (err) - goto err_out; - - /* update counts and index */ - rxr_remaining -= rqpv; - txr_remaining -= tqpv; - rxr_idx++; - txr_idx++; - } - - return 0; - -err_out: - adapter->num_tx_queues = 0; - adapter->num_rx_queues = 0; - adapter->num_q_vectors = 0; - - while (v_idx--) - igb_free_q_vector(adapter, v_idx); - - return -ENOMEM; -} - -/** - * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors - * - * This function initializes the interrupts and allocates all of the queues. - **/ -static int igb_init_interrupt_scheme(struct igb_adapter *adapter, bool msix) -{ - struct pci_dev *pdev = adapter->pdev; - int err; - - igb_set_interrupt_capability(adapter, msix); - - err = igb_alloc_q_vectors(adapter); - if (err) { - dev_err(pci_dev_to_dev(pdev), "Unable to allocate memory for vectors\n"); - goto err_alloc_q_vectors; - } - - igb_cache_ring_register(adapter); - - return 0; - -err_alloc_q_vectors: - igb_reset_interrupt_capability(adapter); - return err; -} - -/** - * igb_request_irq - initialize interrupts - * - * Attempts to configure interrupts using the best available - * capabilities of the hardware and kernel. - **/ -static int igb_request_irq(struct igb_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - int err = 0; - - if (adapter->msix_entries) { - err = igb_request_msix(adapter); - if (!err) - goto request_done; - /* fall back to MSI */ - igb_free_all_tx_resources(adapter); - igb_free_all_rx_resources(adapter); - - igb_clear_interrupt_scheme(adapter); - igb_reset_sriov_capability(adapter); - err = igb_init_interrupt_scheme(adapter, false); - if (err) - goto request_done; - igb_setup_all_tx_resources(adapter); - igb_setup_all_rx_resources(adapter); - igb_configure(adapter); - } - - igb_assign_vector(adapter->q_vector[0], 0); - - if (adapter->flags & IGB_FLAG_HAS_MSI) { - err = request_irq(pdev->irq, &igb_intr_msi, 0, - netdev->name, adapter); - if (!err) - goto request_done; - - /* fall back to legacy interrupts */ - igb_reset_interrupt_capability(adapter); - adapter->flags &= ~IGB_FLAG_HAS_MSI; - } - - err = request_irq(pdev->irq, &igb_intr, IRQF_SHARED, - netdev->name, adapter); - - if (err) - dev_err(pci_dev_to_dev(pdev), "Error %d getting interrupt\n", - err); - -request_done: - return err; -} - -static void igb_free_irq(struct igb_adapter *adapter) -{ - if (adapter->msix_entries) { - int vector = 0, i; - - free_irq(adapter->msix_entries[vector++].vector, adapter); - - for (i = 0; i < adapter->num_q_vectors; i++) - free_irq(adapter->msix_entries[vector++].vector, - adapter->q_vector[i]); - } else { - free_irq(adapter->pdev->irq, adapter); - } -} - -/** - * igb_irq_disable - Mask off interrupt generation on the NIC - * @adapter: board private structure - **/ -static void igb_irq_disable(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - - /* - * we need to be careful when disabling interrupts. The VFs are also - * mapped into these registers and so clearing the bits can cause - * issues on the VF drivers so we only need to clear what we set - */ - if (adapter->msix_entries) { - u32 regval = E1000_READ_REG(hw, E1000_EIAM); - E1000_WRITE_REG(hw, E1000_EIAM, regval & ~adapter->eims_enable_mask); - E1000_WRITE_REG(hw, E1000_EIMC, adapter->eims_enable_mask); - regval = E1000_READ_REG(hw, E1000_EIAC); - E1000_WRITE_REG(hw, E1000_EIAC, regval & ~adapter->eims_enable_mask); - } - - E1000_WRITE_REG(hw, E1000_IAM, 0); - E1000_WRITE_REG(hw, E1000_IMC, ~0); - E1000_WRITE_FLUSH(hw); - - if (adapter->msix_entries) { - int vector = 0, i; - - synchronize_irq(adapter->msix_entries[vector++].vector); - - for (i = 0; i < adapter->num_q_vectors; i++) - synchronize_irq(adapter->msix_entries[vector++].vector); - } else { - synchronize_irq(adapter->pdev->irq); - } -} - -/** - * igb_irq_enable - Enable default interrupt generation settings - * @adapter: board private structure - **/ -static void igb_irq_enable(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - - if (adapter->msix_entries) { - u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_DRSTA; - u32 regval = E1000_READ_REG(hw, E1000_EIAC); - E1000_WRITE_REG(hw, E1000_EIAC, regval | adapter->eims_enable_mask); - regval = E1000_READ_REG(hw, E1000_EIAM); - E1000_WRITE_REG(hw, E1000_EIAM, regval | adapter->eims_enable_mask); - E1000_WRITE_REG(hw, E1000_EIMS, adapter->eims_enable_mask); - if (adapter->vfs_allocated_count) { - E1000_WRITE_REG(hw, E1000_MBVFIMR, 0xFF); - ims |= E1000_IMS_VMMB; - if (adapter->mdd) - if ((adapter->hw.mac.type == e1000_i350) || - (adapter->hw.mac.type == e1000_i354)) - ims |= E1000_IMS_MDDET; - } - E1000_WRITE_REG(hw, E1000_IMS, ims); - } else { - E1000_WRITE_REG(hw, E1000_IMS, IMS_ENABLE_MASK | - E1000_IMS_DRSTA); - E1000_WRITE_REG(hw, E1000_IAM, IMS_ENABLE_MASK | - E1000_IMS_DRSTA); - } -} - -static void igb_update_mng_vlan(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u16 vid = adapter->hw.mng_cookie.vlan_id; - u16 old_vid = adapter->mng_vlan_id; - - if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) { - /* add VID to filter table */ - igb_vfta_set(adapter, vid, TRUE); - adapter->mng_vlan_id = vid; - } else { - adapter->mng_vlan_id = IGB_MNG_VLAN_NONE; - } - - if ((old_vid != (u16)IGB_MNG_VLAN_NONE) && - (vid != old_vid) && -#ifdef HAVE_VLAN_RX_REGISTER - !vlan_group_get_device(adapter->vlgrp, old_vid)) { -#else - !test_bit(old_vid, adapter->active_vlans)) { -#endif - /* remove VID from filter table */ - igb_vfta_set(adapter, old_vid, FALSE); - } -} - -/** - * igb_release_hw_control - release control of the h/w to f/w - * @adapter: address of board private structure - * - * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that the - * driver is no longer loaded. - * - **/ -static void igb_release_hw_control(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 ctrl_ext; - - /* Let firmware take over control of h/w */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - E1000_WRITE_REG(hw, E1000_CTRL_EXT, - ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); -} - -/** - * igb_get_hw_control - get control of the h/w from f/w - * @adapter: address of board private structure - * - * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit. - * For ASF and Pass Through versions of f/w this means that - * the driver is loaded. - * - **/ -static void igb_get_hw_control(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 ctrl_ext; - - /* Let firmware know the driver has taken over */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - E1000_WRITE_REG(hw, E1000_CTRL_EXT, - ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); -} - -/** - * igb_configure - configure the hardware for RX and TX - * @adapter: private board structure - **/ -static void igb_configure(struct igb_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - int i; - - igb_get_hw_control(adapter); - igb_set_rx_mode(netdev); - - igb_restore_vlan(adapter); - - igb_setup_tctl(adapter); - igb_setup_mrqc(adapter); - igb_setup_rctl(adapter); - - igb_configure_tx(adapter); - igb_configure_rx(adapter); - - e1000_rx_fifo_flush_82575(&adapter->hw); -#ifdef CONFIG_NETDEVICES_MULTIQUEUE - if (adapter->num_tx_queues > 1) - netdev->features |= NETIF_F_MULTI_QUEUE; - else - netdev->features &= ~NETIF_F_MULTI_QUEUE; -#endif - - /* call igb_desc_unused which always leaves - * at least 1 descriptor unused to make sure - * next_to_use != next_to_clean */ - for (i = 0; i < adapter->num_rx_queues; i++) { - struct igb_ring *ring = adapter->rx_ring[i]; - igb_alloc_rx_buffers(ring, igb_desc_unused(ring)); - } -} - -/** - * igb_power_up_link - Power up the phy/serdes link - * @adapter: address of board private structure - **/ -void igb_power_up_link(struct igb_adapter *adapter) -{ - e1000_phy_hw_reset(&adapter->hw); - - if (adapter->hw.phy.media_type == e1000_media_type_copper) - e1000_power_up_phy(&adapter->hw); - else - e1000_power_up_fiber_serdes_link(&adapter->hw); -} - -/** - * igb_power_down_link - Power down the phy/serdes link - * @adapter: address of board private structure - */ -static void igb_power_down_link(struct igb_adapter *adapter) -{ - if (adapter->hw.phy.media_type == e1000_media_type_copper) - e1000_power_down_phy(&adapter->hw); - else - e1000_shutdown_fiber_serdes_link(&adapter->hw); -} - -/* Detect and switch function for Media Auto Sense */ -static void igb_check_swap_media(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 ctrl_ext, connsw; - bool swap_now = false; - bool link; - - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - connsw = E1000_READ_REG(hw, E1000_CONNSW); - link = igb_has_link(adapter); - (void) link; - - /* need to live swap if current media is copper and we have fiber/serdes - * to go to. - */ - - if ((hw->phy.media_type == e1000_media_type_copper) && - (!(connsw & E1000_CONNSW_AUTOSENSE_EN))) { - swap_now = true; - } else if (!(connsw & E1000_CONNSW_SERDESD)) { - /* copper signal takes time to appear */ - if (adapter->copper_tries < 2) { - adapter->copper_tries++; - connsw |= E1000_CONNSW_AUTOSENSE_CONF; - E1000_WRITE_REG(hw, E1000_CONNSW, connsw); - return; - } else { - adapter->copper_tries = 0; - if ((connsw & E1000_CONNSW_PHYSD) && - (!(connsw & E1000_CONNSW_PHY_PDN))) { - swap_now = true; - connsw &= ~E1000_CONNSW_AUTOSENSE_CONF; - E1000_WRITE_REG(hw, E1000_CONNSW, connsw); - } - } - } - - if (swap_now) { - switch (hw->phy.media_type) { - case e1000_media_type_copper: - dev_info(pci_dev_to_dev(adapter->pdev), - "%s:MAS: changing media to fiber/serdes\n", - adapter->netdev->name); - ctrl_ext |= - E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; - adapter->flags |= IGB_FLAG_MEDIA_RESET; - adapter->copper_tries = 0; - break; - case e1000_media_type_internal_serdes: - case e1000_media_type_fiber: - dev_info(pci_dev_to_dev(adapter->pdev), - "%s:MAS: changing media to copper\n", - adapter->netdev->name); - ctrl_ext &= - ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; - adapter->flags |= IGB_FLAG_MEDIA_RESET; - break; - default: - /* shouldn't get here during regular operation */ - dev_err(pci_dev_to_dev(adapter->pdev), - "%s:AMS: Invalid media type found, returning\n", - adapter->netdev->name); - break; - } - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - } -} - -#ifdef HAVE_I2C_SUPPORT -/* igb_get_i2c_data - Reads the I2C SDA data bit - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * - * Returns the I2C data bit value - */ -static int igb_get_i2c_data(void *data) -{ - struct igb_adapter *adapter = data; - struct e1000_hw *hw = &adapter->hw; - s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - return (i2cctl & E1000_I2C_DATA_IN) != 0; -} - -/* igb_set_i2c_data - Sets the I2C data bit - * @data: pointer to hardware structure - * @state: I2C data value (0 or 1) to set - * - * Sets the I2C data bit - */ -static void igb_set_i2c_data(void *data, int state) -{ - struct igb_adapter *adapter = data; - struct e1000_hw *hw = &adapter->hw; - s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - if (state) - i2cctl |= E1000_I2C_DATA_OUT; - else - i2cctl &= ~E1000_I2C_DATA_OUT; - - i2cctl &= ~E1000_I2C_DATA_OE_N; - i2cctl |= E1000_I2C_CLK_OE_N; - - E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); - E1000_WRITE_FLUSH(hw); - -} - -/* igb_set_i2c_clk - Sets the I2C SCL clock - * @data: pointer to hardware structure - * @state: state to set clock - * - * Sets the I2C clock line to state - */ -static void igb_set_i2c_clk(void *data, int state) -{ - struct igb_adapter *adapter = data; - struct e1000_hw *hw = &adapter->hw; - s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - if (state) { - i2cctl |= E1000_I2C_CLK_OUT; - i2cctl &= ~E1000_I2C_CLK_OE_N; - } else { - i2cctl &= ~E1000_I2C_CLK_OUT; - i2cctl &= ~E1000_I2C_CLK_OE_N; - } - E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); - E1000_WRITE_FLUSH(hw); -} - -/* igb_get_i2c_clk - Gets the I2C SCL clock state - * @data: pointer to hardware structure - * - * Gets the I2C clock state - */ -static int igb_get_i2c_clk(void *data) -{ - struct igb_adapter *adapter = data; - struct e1000_hw *hw = &adapter->hw; - s32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - return (i2cctl & E1000_I2C_CLK_IN) != 0; -} - -static const struct i2c_algo_bit_data igb_i2c_algo = { - .setsda = igb_set_i2c_data, - .setscl = igb_set_i2c_clk, - .getsda = igb_get_i2c_data, - .getscl = igb_get_i2c_clk, - .udelay = 5, - .timeout = 20, -}; - -/* igb_init_i2c - Init I2C interface - * @adapter: pointer to adapter structure - * - */ -static s32 igb_init_i2c(struct igb_adapter *adapter) -{ - s32 status = E1000_SUCCESS; - - /* I2C interface supported on i350 devices */ - if (adapter->hw.mac.type != e1000_i350) - return E1000_SUCCESS; - - /* Initialize the i2c bus which is controlled by the registers. - * This bus will use the i2c_algo_bit structue that implements - * the protocol through toggling of the 4 bits in the register. - */ - adapter->i2c_adap.owner = THIS_MODULE; - adapter->i2c_algo = igb_i2c_algo; - adapter->i2c_algo.data = adapter; - adapter->i2c_adap.algo_data = &adapter->i2c_algo; - adapter->i2c_adap.dev.parent = &adapter->pdev->dev; - strlcpy(adapter->i2c_adap.name, "igb BB", - sizeof(adapter->i2c_adap.name)); - status = i2c_bit_add_bus(&adapter->i2c_adap); - return status; -} - -#endif /* HAVE_I2C_SUPPORT */ -/** - * igb_up - Open the interface and prepare it to handle traffic - * @adapter: board private structure - **/ -int igb_up(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - - /* hardware has been reset, we need to reload some things */ - igb_configure(adapter); - - clear_bit(__IGB_DOWN, &adapter->state); - - for (i = 0; i < adapter->num_q_vectors; i++) - napi_enable(&(adapter->q_vector[i]->napi)); - - if (adapter->msix_entries) - igb_configure_msix(adapter); - else - igb_assign_vector(adapter->q_vector[0], 0); - - igb_configure_lli(adapter); - - /* Clear any pending interrupts. */ - E1000_READ_REG(hw, E1000_ICR); - igb_irq_enable(adapter); - - /* notify VFs that reset has been completed */ - if (adapter->vfs_allocated_count) { - u32 reg_data = E1000_READ_REG(hw, E1000_CTRL_EXT); - reg_data |= E1000_CTRL_EXT_PFRSTD; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg_data); - } - - netif_tx_start_all_queues(adapter->netdev); - - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - schedule_work(&adapter->dma_err_task); - /* start the watchdog. */ - hw->mac.get_link_status = 1; - schedule_work(&adapter->watchdog_task); - - if ((adapter->flags & IGB_FLAG_EEE) && - (!hw->dev_spec._82575.eee_disable)) - adapter->eee_advert = MDIO_EEE_100TX | MDIO_EEE_1000T; - - return 0; -} - -void igb_down(struct igb_adapter *adapter) -{ - struct net_device *netdev = adapter->netdev; - struct e1000_hw *hw = &adapter->hw; - u32 tctl, rctl; - int i; - - /* signal that we're down so the interrupt handler does not - * reschedule our watchdog timer */ - set_bit(__IGB_DOWN, &adapter->state); - - /* disable receives in the hardware */ - rctl = E1000_READ_REG(hw, E1000_RCTL); - E1000_WRITE_REG(hw, E1000_RCTL, rctl & ~E1000_RCTL_EN); - /* flush and sleep below */ - - netif_tx_stop_all_queues(netdev); - - /* disable transmits in the hardware */ - tctl = E1000_READ_REG(hw, E1000_TCTL); - tctl &= ~E1000_TCTL_EN; - E1000_WRITE_REG(hw, E1000_TCTL, tctl); - /* flush both disables and wait for them to finish */ - E1000_WRITE_FLUSH(hw); - usleep_range(10000, 20000); - - for (i = 0; i < adapter->num_q_vectors; i++) - napi_disable(&(adapter->q_vector[i]->napi)); - - igb_irq_disable(adapter); - - adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; - - del_timer_sync(&adapter->watchdog_timer); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - del_timer_sync(&adapter->dma_err_timer); - del_timer_sync(&adapter->phy_info_timer); - - netif_carrier_off(netdev); - - /* record the stats before reset*/ - igb_update_stats(adapter); - - adapter->link_speed = 0; - adapter->link_duplex = 0; - -#ifdef HAVE_PCI_ERS - if (!pci_channel_offline(adapter->pdev)) - igb_reset(adapter); -#else - igb_reset(adapter); -#endif - igb_clean_all_tx_rings(adapter); - igb_clean_all_rx_rings(adapter); -#ifdef IGB_DCA - /* since we reset the hardware DCA settings were cleared */ - igb_setup_dca(adapter); -#endif -} - -void igb_reinit_locked(struct igb_adapter *adapter) -{ - WARN_ON(in_interrupt()); - while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) - usleep_range(1000, 2000); - igb_down(adapter); - igb_up(adapter); - clear_bit(__IGB_RESETTING, &adapter->state); -} - -/** - * igb_enable_mas - Media Autosense re-enable after swap - * - * @adapter: adapter struct - **/ -static s32 igb_enable_mas(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 connsw; - s32 ret_val = E1000_SUCCESS; - - connsw = E1000_READ_REG(hw, E1000_CONNSW); - if (hw->phy.media_type == e1000_media_type_copper) { - /* configure for SerDes media detect */ - if (!(connsw & E1000_CONNSW_SERDESD)) { - connsw |= E1000_CONNSW_ENRGSRC; - connsw |= E1000_CONNSW_AUTOSENSE_EN; - E1000_WRITE_REG(hw, E1000_CONNSW, connsw); - E1000_WRITE_FLUSH(hw); - } else if (connsw & E1000_CONNSW_SERDESD) { - /* already SerDes, no need to enable anything */ - return ret_val; - } else { - dev_info(pci_dev_to_dev(adapter->pdev), - "%s:MAS: Unable to configure feature, disabling..\n", - adapter->netdev->name); - adapter->flags &= ~IGB_FLAG_MAS_ENABLE; - } - } - return ret_val; -} - -void igb_reset(struct igb_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - struct e1000_hw *hw = &adapter->hw; - struct e1000_mac_info *mac = &hw->mac; - struct e1000_fc_info *fc = &hw->fc; - u32 pba = 0, tx_space, min_tx_space, min_rx_space, hwm; - - /* Repartition Pba for greater than 9k mtu - * To take effect CTRL.RST is required. - */ - switch (mac->type) { - case e1000_i350: - case e1000_82580: - case e1000_i354: - pba = E1000_READ_REG(hw, E1000_RXPBS); - pba = e1000_rxpbs_adjust_82580(pba); - break; - case e1000_82576: - pba = E1000_READ_REG(hw, E1000_RXPBS); - pba &= E1000_RXPBS_SIZE_MASK_82576; - break; - case e1000_82575: - case e1000_i210: - case e1000_i211: - default: - pba = E1000_PBA_34K; - break; - } - - if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) && - (mac->type < e1000_82576)) { - /* adjust PBA for jumbo frames */ - E1000_WRITE_REG(hw, E1000_PBA, pba); - - /* To maintain wire speed transmits, the Tx FIFO should be - * large enough to accommodate two full transmit packets, - * rounded up to the next 1KB and expressed in KB. Likewise, - * the Rx FIFO should be large enough to accommodate at least - * one full receive packet and is similarly rounded up and - * expressed in KB. */ - pba = E1000_READ_REG(hw, E1000_PBA); - /* upper 16 bits has Tx packet buffer allocation size in KB */ - tx_space = pba >> 16; - /* lower 16 bits has Rx packet buffer allocation size in KB */ - pba &= 0xffff; - /* the tx fifo also stores 16 bytes of information about the tx - * but don't include ethernet FCS because hardware appends it */ - min_tx_space = (adapter->max_frame_size + - sizeof(union e1000_adv_tx_desc) - - ETH_FCS_LEN) * 2; - min_tx_space = ALIGN(min_tx_space, 1024); - min_tx_space >>= 10; - /* software strips receive CRC, so leave room for it */ - min_rx_space = adapter->max_frame_size; - min_rx_space = ALIGN(min_rx_space, 1024); - min_rx_space >>= 10; - - /* If current Tx allocation is less than the min Tx FIFO size, - * and the min Tx FIFO size is less than the current Rx FIFO - * allocation, take space away from current Rx allocation */ - if (tx_space < min_tx_space && - ((min_tx_space - tx_space) < pba)) { - pba = pba - (min_tx_space - tx_space); - - /* if short on rx space, rx wins and must trump tx - * adjustment */ - if (pba < min_rx_space) - pba = min_rx_space; - } - E1000_WRITE_REG(hw, E1000_PBA, pba); - } - - /* flow control settings */ - /* The high water mark must be low enough to fit one full frame - * (or the size used for early receive) above it in the Rx FIFO. - * Set it to the lower of: - * - 90% of the Rx FIFO size, or - * - the full Rx FIFO size minus one full frame */ - hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - 2 * adapter->max_frame_size)); - - fc->high_water = hwm & 0xFFFFFFF0; /* 16-byte granularity */ - fc->low_water = fc->high_water - 16; - fc->pause_time = 0xFFFF; - fc->send_xon = 1; - fc->current_mode = fc->requested_mode; - - /* disable receive for all VFs and wait one second */ - if (adapter->vfs_allocated_count) { - int i; - /* - * Clear all flags except indication that the PF has set - * the VF MAC addresses administratively - */ - for (i = 0 ; i < adapter->vfs_allocated_count; i++) - adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC; - - /* ping all the active vfs to let them know we are going down */ - igb_ping_all_vfs(adapter); - - /* disable transmits and receives */ - E1000_WRITE_REG(hw, E1000_VFRE, 0); - E1000_WRITE_REG(hw, E1000_VFTE, 0); - } - - /* Allow time for pending master requests to run */ - e1000_reset_hw(hw); - E1000_WRITE_REG(hw, E1000_WUC, 0); - - if (adapter->flags & IGB_FLAG_MEDIA_RESET) { - e1000_setup_init_funcs(hw, TRUE); - igb_check_options(adapter); - e1000_get_bus_info(hw); - adapter->flags &= ~IGB_FLAG_MEDIA_RESET; - } - if (adapter->flags & IGB_FLAG_MAS_ENABLE) { - if (igb_enable_mas(adapter)) - dev_err(pci_dev_to_dev(pdev), - "Error enabling Media Auto Sense\n"); - } - if (e1000_init_hw(hw)) - dev_err(pci_dev_to_dev(pdev), "Hardware Error\n"); - - /* - * Flow control settings reset on hardware reset, so guarantee flow - * control is off when forcing speed. - */ - if (!hw->mac.autoneg) - e1000_force_mac_fc(hw); - - igb_init_dmac(adapter, pba); - /* Re-initialize the thermal sensor on i350 devices. */ - if (mac->type == e1000_i350 && hw->bus.func == 0) { - /* - * If present, re-initialize the external thermal sensor - * interface. - */ - if (adapter->ets) - e1000_set_i2c_bb(hw); - e1000_init_thermal_sensor_thresh(hw); - } - - /*Re-establish EEE setting */ - if (hw->phy.media_type == e1000_media_type_copper) { - switch (mac->type) { - case e1000_i350: - case e1000_i210: - case e1000_i211: - e1000_set_eee_i350(hw); - break; - case e1000_i354: - e1000_set_eee_i354(hw); - break; - default: - break; - } - } - - if (!netif_running(adapter->netdev)) - igb_power_down_link(adapter); - - igb_update_mng_vlan(adapter); - - /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ - E1000_WRITE_REG(hw, E1000_VET, ETHERNET_IEEE_VLAN_TYPE); - - -#ifdef HAVE_PTP_1588_CLOCK - /* Re-enable PTP, where applicable. */ - igb_ptp_reset(adapter); -#endif /* HAVE_PTP_1588_CLOCK */ - - e1000_get_phy_info(hw); - - adapter->devrc++; -} - -#ifdef HAVE_NDO_SET_FEATURES -static kni_netdev_features_t igb_fix_features(struct net_device *netdev, - kni_netdev_features_t features) -{ - /* - * Since there is no support for separate tx vlan accel - * enabled make sure tx flag is cleared if rx is. - */ -#ifdef NETIF_F_HW_VLAN_CTAG_RX - if (!(features & NETIF_F_HW_VLAN_CTAG_RX)) - features &= ~NETIF_F_HW_VLAN_CTAG_TX; -#else - if (!(features & NETIF_F_HW_VLAN_RX)) - features &= ~NETIF_F_HW_VLAN_TX; -#endif - - /* If Rx checksum is disabled, then LRO should also be disabled */ - if (!(features & NETIF_F_RXCSUM)) - features &= ~NETIF_F_LRO; - - return features; -} - -static int igb_set_features(struct net_device *netdev, - kni_netdev_features_t features) -{ - u32 changed = netdev->features ^ features; - -#ifdef NETIF_F_HW_VLAN_CTAG_RX - if (changed & NETIF_F_HW_VLAN_CTAG_RX) -#else - if (changed & NETIF_F_HW_VLAN_RX) -#endif - igb_vlan_mode(netdev, features); - - return 0; -} - -#ifdef NTF_SELF -#ifdef USE_CONST_DEV_UC_CHAR -static int igb_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], - struct net_device *dev, - const unsigned char *addr, -#ifdef HAVE_NDO_FDB_ADD_VID - u16 vid, -#endif - u16 flags) -#else -static int igb_ndo_fdb_add(struct ndmsg *ndm, - struct net_device *dev, - unsigned char *addr, - u16 flags) -#endif -{ - struct igb_adapter *adapter = netdev_priv(dev); - struct e1000_hw *hw = &adapter->hw; - int err; - - if (!(adapter->vfs_allocated_count)) - return -EOPNOTSUPP; - - /* Hardware does not support aging addresses so if a - * ndm_state is given only allow permanent addresses - */ - if (ndm->ndm_state && !(ndm->ndm_state & NUD_PERMANENT)) { - pr_info("%s: FDB only supports static addresses\n", - igb_driver_name); - return -EINVAL; - } - - if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr)) { - u32 rar_uc_entries = hw->mac.rar_entry_count - - (adapter->vfs_allocated_count + 1); - - if (netdev_uc_count(dev) < rar_uc_entries) - err = dev_uc_add_excl(dev, addr); - else - err = -ENOMEM; - } else if (is_multicast_ether_addr(addr)) { - err = dev_mc_add_excl(dev, addr); - } else { - err = -EINVAL; - } - - /* Only return duplicate errors if NLM_F_EXCL is set */ - if (err == -EEXIST && !(flags & NLM_F_EXCL)) - err = 0; - - return err; -} - -#ifndef USE_DEFAULT_FDB_DEL_DUMP -#ifdef USE_CONST_DEV_UC_CHAR -static int igb_ndo_fdb_del(struct ndmsg *ndm, - struct net_device *dev, - const unsigned char *addr) -#else -static int igb_ndo_fdb_del(struct ndmsg *ndm, - struct net_device *dev, - unsigned char *addr) -#endif -{ - struct igb_adapter *adapter = netdev_priv(dev); - int err = -EOPNOTSUPP; - - if (ndm->ndm_state & NUD_PERMANENT) { - pr_info("%s: FDB only supports static addresses\n", - igb_driver_name); - return -EINVAL; - } - - if (adapter->vfs_allocated_count) { - if (is_unicast_ether_addr(addr)) - err = dev_uc_del(dev, addr); - else if (is_multicast_ether_addr(addr)) - err = dev_mc_del(dev, addr); - else - err = -EINVAL; - } - - return err; -} - -static int igb_ndo_fdb_dump(struct sk_buff *skb, - struct netlink_callback *cb, - struct net_device *dev, - int idx) -{ - struct igb_adapter *adapter = netdev_priv(dev); - - if (adapter->vfs_allocated_count) - idx = ndo_dflt_fdb_dump(skb, cb, dev, idx); - - return idx; -} -#endif /* USE_DEFAULT_FDB_DEL_DUMP */ - -#ifdef HAVE_BRIDGE_ATTRIBS -#ifdef HAVE_NDO_BRIDGE_SET_DEL_LINK_FLAGS -static int igb_ndo_bridge_setlink(struct net_device *dev, - struct nlmsghdr *nlh, - u16 flags) -#else -static int igb_ndo_bridge_setlink(struct net_device *dev, - struct nlmsghdr *nlh) -#endif /* HAVE_NDO_BRIDGE_SET_DEL_LINK_FLAGS */ -{ - struct igb_adapter *adapter = netdev_priv(dev); - struct e1000_hw *hw = &adapter->hw; - struct nlattr *attr, *br_spec; - int rem; - - if (!(adapter->vfs_allocated_count)) - return -EOPNOTSUPP; - - switch (adapter->hw.mac.type) { - case e1000_82576: - case e1000_i350: - case e1000_i354: - break; - default: - return -EOPNOTSUPP; - } - - br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); - - nla_for_each_nested(attr, br_spec, rem) { - __u16 mode; - - if (nla_type(attr) != IFLA_BRIDGE_MODE) - continue; - - mode = nla_get_u16(attr); - if (mode == BRIDGE_MODE_VEPA) { - e1000_vmdq_set_loopback_pf(hw, 0); - adapter->flags &= ~IGB_FLAG_LOOPBACK_ENABLE; - } else if (mode == BRIDGE_MODE_VEB) { - e1000_vmdq_set_loopback_pf(hw, 1); - adapter->flags |= IGB_FLAG_LOOPBACK_ENABLE; - } else - return -EINVAL; - - netdev_info(adapter->netdev, "enabling bridge mode: %s\n", - mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); - } - - return 0; -} - -#ifdef HAVE_BRIDGE_FILTER -#ifdef HAVE_NDO_BRIDGE_GETLINK_NLFLAGS -static int igb_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, - struct net_device *dev, u32 filter_mask, - int nlflags) -#else -static int igb_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, - struct net_device *dev, u32 filter_mask) -#endif /* HAVE_NDO_BRIDGE_GETLINK_NLFLAGS */ -#else -static int igb_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, - struct net_device *dev) -#endif -{ - struct igb_adapter *adapter = netdev_priv(dev); - u16 mode; - - if (!(adapter->vfs_allocated_count)) - return -EOPNOTSUPP; - - if (adapter->flags & IGB_FLAG_LOOPBACK_ENABLE) - mode = BRIDGE_MODE_VEB; - else - mode = BRIDGE_MODE_VEPA; - -#ifdef HAVE_NDO_DFLT_BRIDGE_ADD_MASK -#ifdef HAVE_NDO_BRIDGE_GETLINK_NLFLAGS -#ifdef HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL - return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0, - nlflags, filter_mask, NULL); -#else - return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0, nlflags); -#endif /* HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL */ -#else - return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0); -#endif /* HAVE_NDO_BRIDGE_GETLINK_NLFLAGS */ -#else - return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode); -#endif /* HAVE_NDO_DFLT_BRIDGE_ADD_MASK */ -} -#endif /* HAVE_BRIDGE_ATTRIBS */ -#endif /* NTF_SELF */ - -#endif /* HAVE_NDO_SET_FEATURES */ -#ifdef HAVE_NET_DEVICE_OPS -static const struct net_device_ops igb_netdev_ops = { - .ndo_open = igb_open, - .ndo_stop = igb_close, - .ndo_start_xmit = igb_xmit_frame, - .ndo_get_stats = igb_get_stats, - .ndo_set_rx_mode = igb_set_rx_mode, - .ndo_set_mac_address = igb_set_mac, - .ndo_change_mtu = igb_change_mtu, - .ndo_do_ioctl = igb_ioctl, - .ndo_tx_timeout = igb_tx_timeout, - .ndo_validate_addr = eth_validate_addr, - .ndo_vlan_rx_add_vid = igb_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = igb_vlan_rx_kill_vid, -#ifdef IFLA_VF_MAX - .ndo_set_vf_mac = igb_ndo_set_vf_mac, - .ndo_set_vf_vlan = igb_ndo_set_vf_vlan, -#ifdef HAVE_VF_MIN_MAX_TXRATE - .ndo_set_vf_rate = igb_ndo_set_vf_bw, -#else /* HAVE_VF_MIN_MAX_TXRATE */ - .ndo_set_vf_tx_rate = igb_ndo_set_vf_bw, -#endif /* HAVE_VF_MIN_MAX_TXRATE */ - .ndo_get_vf_config = igb_ndo_get_vf_config, -#ifdef HAVE_VF_SPOOFCHK_CONFIGURE - .ndo_set_vf_spoofchk = igb_ndo_set_vf_spoofchk, -#endif /* HAVE_VF_SPOOFCHK_CONFIGURE */ -#endif /* IFLA_VF_MAX */ -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = igb_netpoll, -#endif -#ifdef HAVE_NDO_SET_FEATURES - .ndo_fix_features = igb_fix_features, - .ndo_set_features = igb_set_features, -#endif -#ifdef HAVE_VLAN_RX_REGISTER - .ndo_vlan_rx_register = igb_vlan_mode, -#endif -#ifndef HAVE_RHEL6_NETDEV_OPS_EXT_FDB -#ifdef NTF_SELF - .ndo_fdb_add = igb_ndo_fdb_add, -#ifndef USE_DEFAULT_FDB_DEL_DUMP - .ndo_fdb_del = igb_ndo_fdb_del, - .ndo_fdb_dump = igb_ndo_fdb_dump, -#endif -#endif /* ! HAVE_RHEL6_NETDEV_OPS_EXT_FDB */ -#ifdef HAVE_BRIDGE_ATTRIBS - .ndo_bridge_setlink = igb_ndo_bridge_setlink, - .ndo_bridge_getlink = igb_ndo_bridge_getlink, -#endif /* HAVE_BRIDGE_ATTRIBS */ -#endif -}; - -#ifdef CONFIG_IGB_VMDQ_NETDEV -static const struct net_device_ops igb_vmdq_ops = { - .ndo_open = &igb_vmdq_open, - .ndo_stop = &igb_vmdq_close, - .ndo_start_xmit = &igb_vmdq_xmit_frame, - .ndo_get_stats = &igb_vmdq_get_stats, - .ndo_set_rx_mode = &igb_vmdq_set_rx_mode, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = &igb_vmdq_set_mac, - .ndo_change_mtu = &igb_vmdq_change_mtu, - .ndo_tx_timeout = &igb_vmdq_tx_timeout, - .ndo_vlan_rx_register = &igb_vmdq_vlan_rx_register, - .ndo_vlan_rx_add_vid = &igb_vmdq_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = &igb_vmdq_vlan_rx_kill_vid, -}; - -#endif /* CONFIG_IGB_VMDQ_NETDEV */ -#endif /* HAVE_NET_DEVICE_OPS */ -#ifdef CONFIG_IGB_VMDQ_NETDEV -void igb_assign_vmdq_netdev_ops(struct net_device *vnetdev) -{ -#ifdef HAVE_NET_DEVICE_OPS - vnetdev->netdev_ops = &igb_vmdq_ops; -#else - dev->open = &igb_vmdq_open; - dev->stop = &igb_vmdq_close; - dev->hard_start_xmit = &igb_vmdq_xmit_frame; - dev->get_stats = &igb_vmdq_get_stats; -#ifdef HAVE_SET_RX_MODE - dev->set_rx_mode = &igb_vmdq_set_rx_mode; -#endif - dev->set_multicast_list = &igb_vmdq_set_rx_mode; - dev->set_mac_address = &igb_vmdq_set_mac; - dev->change_mtu = &igb_vmdq_change_mtu; -#ifdef HAVE_TX_TIMEOUT - dev->tx_timeout = &igb_vmdq_tx_timeout; -#endif -#if defined(NETIF_F_HW_VLAN_TX) || defined(NETIF_F_HW_VLAN_CTAG_TX) - dev->vlan_rx_register = &igb_vmdq_vlan_rx_register; - dev->vlan_rx_add_vid = &igb_vmdq_vlan_rx_add_vid; - dev->vlan_rx_kill_vid = &igb_vmdq_vlan_rx_kill_vid; -#endif -#endif - igb_vmdq_set_ethtool_ops(vnetdev); - vnetdev->watchdog_timeo = 5 * HZ; - -} - -int igb_init_vmdq_netdevs(struct igb_adapter *adapter) -{ - int pool, err = 0, base_queue; - struct net_device *vnetdev; - struct igb_vmdq_adapter *vmdq_adapter; - - for (pool = 1; pool < adapter->vmdq_pools; pool++) { - int qpp = (!adapter->rss_queues ? 1 : adapter->rss_queues); - base_queue = pool * qpp; - vnetdev = alloc_etherdev(sizeof(struct igb_vmdq_adapter)); - if (!vnetdev) { - err = -ENOMEM; - break; - } - vmdq_adapter = netdev_priv(vnetdev); - vmdq_adapter->vnetdev = vnetdev; - vmdq_adapter->real_adapter = adapter; - vmdq_adapter->rx_ring = adapter->rx_ring[base_queue]; - vmdq_adapter->tx_ring = adapter->tx_ring[base_queue]; - igb_assign_vmdq_netdev_ops(vnetdev); - snprintf(vnetdev->name, IFNAMSIZ, "%sv%d", - adapter->netdev->name, pool); - vnetdev->features = adapter->netdev->features; -#ifdef HAVE_NETDEV_VLAN_FEATURES - vnetdev->vlan_features = adapter->netdev->vlan_features; -#endif - adapter->vmdq_netdev[pool-1] = vnetdev; - err = register_netdev(vnetdev); - if (err) - break; - } - return err; -} - -int igb_remove_vmdq_netdevs(struct igb_adapter *adapter) -{ - int pool, err = 0; - - for (pool = 1; pool < adapter->vmdq_pools; pool++) { - unregister_netdev(adapter->vmdq_netdev[pool-1]); - free_netdev(adapter->vmdq_netdev[pool-1]); - adapter->vmdq_netdev[pool-1] = NULL; - } - return err; -} -#endif /* CONFIG_IGB_VMDQ_NETDEV */ - -/** - * igb_set_fw_version - Configure version string for ethtool - * @adapter: adapter struct - * - **/ -static void igb_set_fw_version(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - struct e1000_fw_version fw; - - e1000_get_fw_version(hw, &fw); - - switch (hw->mac.type) { - case e1000_i210: - case e1000_i211: - if (!(e1000_get_flash_presence_i210(hw))) { - snprintf(adapter->fw_version, - sizeof(adapter->fw_version), - "%2d.%2d-%d", - fw.invm_major, fw.invm_minor, fw.invm_img_type); - break; - } - /* fall through */ - default: - /* if option rom is valid, display its version too*/ - if (fw.or_valid) { - snprintf(adapter->fw_version, - sizeof(adapter->fw_version), - "%d.%d, 0x%08x, %d.%d.%d", - fw.eep_major, fw.eep_minor, fw.etrack_id, - fw.or_major, fw.or_build, fw.or_patch); - /* no option rom */ - } else { - if (fw.etrack_id != 0X0000) { - snprintf(adapter->fw_version, - sizeof(adapter->fw_version), - "%d.%d, 0x%08x", - fw.eep_major, fw.eep_minor, fw.etrack_id); - } else { - snprintf(adapter->fw_version, - sizeof(adapter->fw_version), - "%d.%d.%d", - fw.eep_major, fw.eep_minor, fw.eep_build); - } - } - break; - } - - return; -} - -/** - * igb_init_mas - init Media Autosense feature if enabled in the NVM - * - * @adapter: adapter struct - **/ -static void igb_init_mas(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u16 eeprom_data; - - e1000_read_nvm(hw, NVM_COMPAT, 1, &eeprom_data); - switch (hw->bus.func) { - case E1000_FUNC_0: - if (eeprom_data & IGB_MAS_ENABLE_0) - adapter->flags |= IGB_FLAG_MAS_ENABLE; - break; - case E1000_FUNC_1: - if (eeprom_data & IGB_MAS_ENABLE_1) - adapter->flags |= IGB_FLAG_MAS_ENABLE; - break; - case E1000_FUNC_2: - if (eeprom_data & IGB_MAS_ENABLE_2) - adapter->flags |= IGB_FLAG_MAS_ENABLE; - break; - case E1000_FUNC_3: - if (eeprom_data & IGB_MAS_ENABLE_3) - adapter->flags |= IGB_FLAG_MAS_ENABLE; - break; - default: - /* Shouldn't get here */ - dev_err(pci_dev_to_dev(adapter->pdev), - "%s:AMS: Invalid port configuration, returning\n", - adapter->netdev->name); - break; - } -} - -/** - * igb_probe - Device Initialization Routine - * @pdev: PCI device information struct - * @ent: entry in igb_pci_tbl - * - * Returns 0 on success, negative on failure - * - * igb_probe initializes an adapter identified by a pci_dev structure. - * The OS initialization, configuring of the adapter private structure, - * and a hardware reset occur. - **/ -static int __devinit igb_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *netdev; - struct igb_adapter *adapter; - struct e1000_hw *hw; - u16 eeprom_data = 0; - u8 pba_str[E1000_PBANUM_LENGTH]; - s32 ret_val; - static int global_quad_port_a; /* global quad port a indication */ - int i, err, pci_using_dac; - static int cards_found; - - err = pci_enable_device_mem(pdev); - if (err) - return err; - - pci_using_dac = 0; - err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); - if (!err) { - err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); - if (!err) - pci_using_dac = 1; - } else { - err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); - if (err) { - err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); - if (err) { - IGB_ERR("No usable DMA configuration, " - "aborting\n"); - goto err_dma; - } - } - } - -#ifndef HAVE_ASPM_QUIRKS - /* 82575 requires that the pci-e link partner disable the L0s state */ - switch (pdev->device) { - case E1000_DEV_ID_82575EB_COPPER: - case E1000_DEV_ID_82575EB_FIBER_SERDES: - case E1000_DEV_ID_82575GB_QUAD_COPPER: - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); - default: - break; - } - -#endif /* HAVE_ASPM_QUIRKS */ - err = pci_request_selected_regions(pdev, - pci_select_bars(pdev, - IORESOURCE_MEM), - igb_driver_name); - if (err) - goto err_pci_reg; - - pci_enable_pcie_error_reporting(pdev); - - pci_set_master(pdev); - - err = -ENOMEM; -#ifdef HAVE_TX_MQ - netdev = alloc_etherdev_mq(sizeof(struct igb_adapter), - IGB_MAX_TX_QUEUES); -#else - netdev = alloc_etherdev(sizeof(struct igb_adapter)); -#endif /* HAVE_TX_MQ */ - if (!netdev) - goto err_alloc_etherdev; - - SET_MODULE_OWNER(netdev); - SET_NETDEV_DEV(netdev, &pdev->dev); - - pci_set_drvdata(pdev, netdev); - adapter = netdev_priv(netdev); - adapter->netdev = netdev; - adapter->pdev = pdev; - hw = &adapter->hw; - hw->back = adapter; - adapter->port_num = hw->bus.func; - adapter->msg_enable = (1 << debug) - 1; - -#ifdef HAVE_PCI_ERS - err = pci_save_state(pdev); - if (err) - goto err_ioremap; -#endif - err = -EIO; - hw->hw_addr = ioremap(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - if (!hw->hw_addr) - goto err_ioremap; - -#ifdef HAVE_NET_DEVICE_OPS - netdev->netdev_ops = &igb_netdev_ops; -#else /* HAVE_NET_DEVICE_OPS */ - netdev->open = &igb_open; - netdev->stop = &igb_close; - netdev->get_stats = &igb_get_stats; -#ifdef HAVE_SET_RX_MODE - netdev->set_rx_mode = &igb_set_rx_mode; -#endif - netdev->set_multicast_list = &igb_set_rx_mode; - netdev->set_mac_address = &igb_set_mac; - netdev->change_mtu = &igb_change_mtu; - netdev->do_ioctl = &igb_ioctl; -#ifdef HAVE_TX_TIMEOUT - netdev->tx_timeout = &igb_tx_timeout; -#endif - netdev->vlan_rx_register = igb_vlan_mode; - netdev->vlan_rx_add_vid = igb_vlan_rx_add_vid; - netdev->vlan_rx_kill_vid = igb_vlan_rx_kill_vid; -#ifdef CONFIG_NET_POLL_CONTROLLER - netdev->poll_controller = igb_netpoll; -#endif - netdev->hard_start_xmit = &igb_xmit_frame; -#endif /* HAVE_NET_DEVICE_OPS */ - igb_set_ethtool_ops(netdev); -#ifdef HAVE_TX_TIMEOUT - netdev->watchdog_timeo = 5 * HZ; -#endif - - strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); - - adapter->bd_number = cards_found; - - /* setup the private structure */ - err = igb_sw_init(adapter); - if (err) - goto err_sw_init; - - e1000_get_bus_info(hw); - - hw->phy.autoneg_wait_to_complete = FALSE; - hw->mac.adaptive_ifs = FALSE; - - /* Copper options */ - if (hw->phy.media_type == e1000_media_type_copper) { - hw->phy.mdix = AUTO_ALL_MODES; - hw->phy.disable_polarity_correction = FALSE; - hw->phy.ms_type = e1000_ms_hw_default; - } - - if (e1000_check_reset_block(hw)) - dev_info(pci_dev_to_dev(pdev), - "PHY reset is blocked due to SOL/IDER session.\n"); - - /* - * features is initialized to 0 in allocation, it might have bits - * set by igb_sw_init so we should use an or instead of an - * assignment. - */ - netdev->features |= NETIF_F_SG | - NETIF_F_IP_CSUM | -#ifdef NETIF_F_IPV6_CSUM - NETIF_F_IPV6_CSUM | -#endif -#ifdef NETIF_F_TSO - NETIF_F_TSO | -#ifdef NETIF_F_TSO6 - NETIF_F_TSO6 | -#endif -#endif /* NETIF_F_TSO */ -#ifdef NETIF_F_RXHASH - NETIF_F_RXHASH | -#endif - NETIF_F_RXCSUM | -#ifdef NETIF_F_HW_VLAN_CTAG_RX - NETIF_F_HW_VLAN_CTAG_RX | - NETIF_F_HW_VLAN_CTAG_TX; -#else - NETIF_F_HW_VLAN_RX | - NETIF_F_HW_VLAN_TX; -#endif - - if (hw->mac.type >= e1000_82576) - netdev->features |= NETIF_F_SCTP_CSUM; - -#ifdef HAVE_NDO_SET_FEATURES - /* copy netdev features into list of user selectable features */ - netdev->hw_features |= netdev->features; -#ifndef IGB_NO_LRO - - /* give us the option of enabling LRO later */ - netdev->hw_features |= NETIF_F_LRO; -#endif -#else -#ifdef NETIF_F_GRO - - /* this is only needed on kernels prior to 2.6.39 */ - netdev->features |= NETIF_F_GRO; -#endif -#endif - - /* set this bit last since it cannot be part of hw_features */ -#ifdef NETIF_F_HW_VLAN_CTAG_FILTER - netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; -#else - netdev->features |= NETIF_F_HW_VLAN_FILTER; -#endif - -#ifdef HAVE_NETDEV_VLAN_FEATURES - netdev->vlan_features |= NETIF_F_TSO | - NETIF_F_TSO6 | - NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM | - NETIF_F_SG; - -#endif - if (pci_using_dac) - netdev->features |= NETIF_F_HIGHDMA; - - adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw); -#ifdef DEBUG - if (adapter->dmac != IGB_DMAC_DISABLE) - printk("%s: DMA Coalescing is enabled..\n", netdev->name); -#endif - - /* before reading the NVM, reset the controller to put the device in a - * known good starting state */ - e1000_reset_hw(hw); - - /* make sure the NVM is good */ - if (e1000_validate_nvm_checksum(hw) < 0) { - dev_err(pci_dev_to_dev(pdev), "The NVM Checksum Is Not" - " Valid\n"); - err = -EIO; - goto err_eeprom; - } - - /* copy the MAC address out of the NVM */ - if (e1000_read_mac_addr(hw)) - dev_err(pci_dev_to_dev(pdev), "NVM Read Error\n"); - memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); -#ifdef ETHTOOL_GPERMADDR - memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); - - if (!is_valid_ether_addr(netdev->perm_addr)) { -#else - if (!is_valid_ether_addr(netdev->dev_addr)) { -#endif - dev_err(pci_dev_to_dev(pdev), "Invalid MAC Address\n"); - err = -EIO; - goto err_eeprom; - } - - memcpy(&adapter->mac_table[0].addr, hw->mac.addr, netdev->addr_len); - adapter->mac_table[0].queue = adapter->vfs_allocated_count; - adapter->mac_table[0].state = (IGB_MAC_STATE_DEFAULT | IGB_MAC_STATE_IN_USE); - igb_rar_set(adapter, 0); - - /* get firmware version for ethtool -i */ - igb_set_fw_version(adapter); - - /* Check if Media Autosense is enabled */ - if (hw->mac.type == e1000_82580) - igb_init_mas(adapter); -#ifdef HAVE_TIMER_SETUP - timer_setup(&adapter->watchdog_timer, &igb_watchdog, 0); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - timer_setup(&adapter->dma_err_timer, &igb_dma_err_timer, 0); - timer_setup(&adapter->phy_info_timer, &igb_update_phy_info, 0); -#else - setup_timer(&adapter->watchdog_timer, &igb_watchdog, - (unsigned long) adapter); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - setup_timer(&adapter->dma_err_timer, &igb_dma_err_timer, - (unsigned long) adapter); - setup_timer(&adapter->phy_info_timer, &igb_update_phy_info, - (unsigned long) adapter); -#endif - - INIT_WORK(&adapter->reset_task, igb_reset_task); - INIT_WORK(&adapter->watchdog_task, igb_watchdog_task); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - INIT_WORK(&adapter->dma_err_task, igb_dma_err_task); - - /* Initialize link properties that are user-changeable */ - adapter->fc_autoneg = true; - hw->mac.autoneg = true; - hw->phy.autoneg_advertised = 0x2f; - - hw->fc.requested_mode = e1000_fc_default; - hw->fc.current_mode = e1000_fc_default; - - e1000_validate_mdi_setting(hw); - - /* By default, support wake on port A */ - if (hw->bus.func == 0) - adapter->flags |= IGB_FLAG_WOL_SUPPORTED; - - /* Check the NVM for wake support for non-port A ports */ - if (hw->mac.type >= e1000_82580) - hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + - NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, - &eeprom_data); - else if (hw->bus.func == 1) - e1000_read_nvm(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); - - if (eeprom_data & IGB_EEPROM_APME) - adapter->flags |= IGB_FLAG_WOL_SUPPORTED; - - /* now that we have the eeprom settings, apply the special cases where - * the eeprom may be wrong or the board simply won't support wake on - * lan on a particular port */ - switch (pdev->device) { - case E1000_DEV_ID_82575GB_QUAD_COPPER: - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - break; - case E1000_DEV_ID_82575EB_FIBER_SERDES: - case E1000_DEV_ID_82576_FIBER: - case E1000_DEV_ID_82576_SERDES: - /* Wake events only supported on port A for dual fiber - * regardless of eeprom setting */ - if (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_FUNC_1) - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - break; - case E1000_DEV_ID_82576_QUAD_COPPER: - case E1000_DEV_ID_82576_QUAD_COPPER_ET2: - /* if quad port adapter, disable WoL on all but port A */ - if (global_quad_port_a != 0) - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - else - adapter->flags |= IGB_FLAG_QUAD_PORT_A; - /* Reset for multiple quad port adapters */ - if (++global_quad_port_a == 4) - global_quad_port_a = 0; - break; - default: - /* If the device can't wake, don't set software support */ - if (!device_can_wakeup(&adapter->pdev->dev)) - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - break; - } - - /* initialize the wol settings based on the eeprom settings */ - if (adapter->flags & IGB_FLAG_WOL_SUPPORTED) - adapter->wol |= E1000_WUFC_MAG; - - /* Some vendors want WoL disabled by default, but still supported */ - if ((hw->mac.type == e1000_i350) && - (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) { - adapter->flags |= IGB_FLAG_WOL_SUPPORTED; - adapter->wol = 0; - } - - device_set_wakeup_enable(pci_dev_to_dev(adapter->pdev), - adapter->flags & IGB_FLAG_WOL_SUPPORTED); - - /* reset the hardware with the new settings */ - igb_reset(adapter); - adapter->devrc = 0; - -#ifdef HAVE_I2C_SUPPORT - /* Init the I2C interface */ - err = igb_init_i2c(adapter); - if (err) { - dev_err(&pdev->dev, "failed to init i2c interface\n"); - goto err_eeprom; - } -#endif /* HAVE_I2C_SUPPORT */ - - /* let the f/w know that the h/w is now under the control of the - * driver. */ - igb_get_hw_control(adapter); - - strncpy(netdev->name, "eth%d", IFNAMSIZ); - err = register_netdev(netdev); - if (err) - goto err_register; - -#ifdef CONFIG_IGB_VMDQ_NETDEV - err = igb_init_vmdq_netdevs(adapter); - if (err) - goto err_register; -#endif - /* carrier off reporting is important to ethtool even BEFORE open */ - netif_carrier_off(netdev); - -#ifdef IGB_DCA - if (dca_add_requester(&pdev->dev) == E1000_SUCCESS) { - adapter->flags |= IGB_FLAG_DCA_ENABLED; - dev_info(pci_dev_to_dev(pdev), "DCA enabled\n"); - igb_setup_dca(adapter); - } - -#endif -#ifdef HAVE_PTP_1588_CLOCK - /* do hw tstamp init after resetting */ - igb_ptp_init(adapter); -#endif /* HAVE_PTP_1588_CLOCK */ - - dev_info(pci_dev_to_dev(pdev), "Intel(R) Gigabit Ethernet Network Connection\n"); - /* print bus type/speed/width info */ - dev_info(pci_dev_to_dev(pdev), "%s: (PCIe:%s:%s) ", - netdev->name, - ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5GT/s" : - (hw->bus.speed == e1000_bus_speed_5000) ? "5.0GT/s" : - (hw->mac.type == e1000_i354) ? "integrated" : - "unknown"), - ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : - (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" : - (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" : - (hw->mac.type == e1000_i354) ? "integrated" : - "unknown")); - dev_info(pci_dev_to_dev(pdev), "%s: MAC: ", netdev->name); - for (i = 0; i < 6; i++) - printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':'); - - ret_val = e1000_read_pba_string(hw, pba_str, E1000_PBANUM_LENGTH); - if (ret_val) - strncpy(pba_str, "Unknown", sizeof(pba_str) - 1); - dev_info(pci_dev_to_dev(pdev), "%s: PBA No: %s\n", netdev->name, - pba_str); - - - /* Initialize the thermal sensor on i350 devices. */ - if (hw->mac.type == e1000_i350) { - if (hw->bus.func == 0) { - u16 ets_word; - - /* - * Read the NVM to determine if this i350 device - * supports an external thermal sensor. - */ - e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_word); - if (ets_word != 0x0000 && ets_word != 0xFFFF) - adapter->ets = true; - else - adapter->ets = false; - } -#ifdef IGB_HWMON - - igb_sysfs_init(adapter); -#else -#ifdef IGB_PROCFS - - igb_procfs_init(adapter); -#endif /* IGB_PROCFS */ -#endif /* IGB_HWMON */ - } else { - adapter->ets = false; - } - - if (hw->phy.media_type == e1000_media_type_copper) { - switch (hw->mac.type) { - case e1000_i350: - case e1000_i210: - case e1000_i211: - /* Enable EEE for internal copper PHY devices */ - err = e1000_set_eee_i350(hw); - if (!err && - (adapter->flags & IGB_FLAG_EEE)) - adapter->eee_advert = - MDIO_EEE_100TX | MDIO_EEE_1000T; - break; - case e1000_i354: - if ((E1000_READ_REG(hw, E1000_CTRL_EXT)) & - (E1000_CTRL_EXT_LINK_MODE_SGMII)) { - err = e1000_set_eee_i354(hw); - if ((!err) && - (adapter->flags & IGB_FLAG_EEE)) - adapter->eee_advert = - MDIO_EEE_100TX | MDIO_EEE_1000T; - } - break; - default: - break; - } - } - - /* send driver version info to firmware */ - if (hw->mac.type >= e1000_i350) - igb_init_fw(adapter); - -#ifndef IGB_NO_LRO - if (netdev->features & NETIF_F_LRO) - dev_info(pci_dev_to_dev(pdev), "Internal LRO is enabled \n"); - else - dev_info(pci_dev_to_dev(pdev), "LRO is disabled \n"); -#endif - dev_info(pci_dev_to_dev(pdev), - "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n", - adapter->msix_entries ? "MSI-X" : - (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy", - adapter->num_rx_queues, adapter->num_tx_queues); - - cards_found++; - - pm_runtime_put_noidle(&pdev->dev); - return 0; - -err_register: - igb_release_hw_control(adapter); -#ifdef HAVE_I2C_SUPPORT - memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap)); -#endif /* HAVE_I2C_SUPPORT */ -err_eeprom: - if (!e1000_check_reset_block(hw)) - e1000_phy_hw_reset(hw); - - if (hw->flash_address) - iounmap(hw->flash_address); -err_sw_init: - igb_clear_interrupt_scheme(adapter); - igb_reset_sriov_capability(adapter); - iounmap(hw->hw_addr); -err_ioremap: - free_netdev(netdev); -err_alloc_etherdev: - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); -err_pci_reg: -err_dma: - pci_disable_device(pdev); - return err; -} -#ifdef HAVE_I2C_SUPPORT -/* - * igb_remove_i2c - Cleanup I2C interface - * @adapter: pointer to adapter structure - * - */ -static void igb_remove_i2c(struct igb_adapter *adapter) -{ - - /* free the adapter bus structure */ - i2c_del_adapter(&adapter->i2c_adap); -} -#endif /* HAVE_I2C_SUPPORT */ - -/** - * igb_remove - Device Removal Routine - * @pdev: PCI device information struct - * - * igb_remove is called by the PCI subsystem to alert the driver - * that it should release a PCI device. The could be caused by a - * Hot-Plug event, or because the driver is going to be removed from - * memory. - **/ -static void __devexit igb_remove(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - - pm_runtime_get_noresume(&pdev->dev); -#ifdef HAVE_I2C_SUPPORT - igb_remove_i2c(adapter); -#endif /* HAVE_I2C_SUPPORT */ -#ifdef HAVE_PTP_1588_CLOCK - igb_ptp_stop(adapter); -#endif /* HAVE_PTP_1588_CLOCK */ - - /* flush_scheduled work may reschedule our watchdog task, so - * explicitly disable watchdog tasks from being rescheduled */ - set_bit(__IGB_DOWN, &adapter->state); - del_timer_sync(&adapter->watchdog_timer); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - del_timer_sync(&adapter->dma_err_timer); - del_timer_sync(&adapter->phy_info_timer); - - flush_scheduled_work(); - -#ifdef IGB_DCA - if (adapter->flags & IGB_FLAG_DCA_ENABLED) { - dev_info(pci_dev_to_dev(pdev), "DCA disabled\n"); - dca_remove_requester(&pdev->dev); - adapter->flags &= ~IGB_FLAG_DCA_ENABLED; - E1000_WRITE_REG(hw, E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_DISABLE); - } -#endif - - /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ - igb_release_hw_control(adapter); - - unregister_netdev(netdev); -#ifdef CONFIG_IGB_VMDQ_NETDEV - igb_remove_vmdq_netdevs(adapter); -#endif - - igb_clear_interrupt_scheme(adapter); - igb_reset_sriov_capability(adapter); - - iounmap(hw->hw_addr); - if (hw->flash_address) - iounmap(hw->flash_address); - pci_release_selected_regions(pdev, - pci_select_bars(pdev, IORESOURCE_MEM)); - -#ifdef IGB_HWMON - igb_sysfs_exit(adapter); -#else -#ifdef IGB_PROCFS - igb_procfs_exit(adapter); -#endif /* IGB_PROCFS */ -#endif /* IGB_HWMON */ - kfree(adapter->mac_table); - kfree(adapter->shadow_vfta); - free_netdev(netdev); - - pci_disable_pcie_error_reporting(pdev); - - pci_disable_device(pdev); -} - -/** - * igb_sw_init - Initialize general software structures (struct igb_adapter) - * @adapter: board private structure to initialize - * - * igb_sw_init initializes the Adapter private data structure. - * Fields are initialized based on PCI device information and - * OS network device settings (MTU size). - **/ -static int igb_sw_init(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - struct pci_dev *pdev = adapter->pdev; - - /* PCI config space info */ - - hw->vendor_id = pdev->vendor; - hw->device_id = pdev->device; - hw->subsystem_vendor_id = pdev->subsystem_vendor; - hw->subsystem_device_id = pdev->subsystem_device; - - pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id); - - pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word); - - /* set default ring sizes */ - adapter->tx_ring_count = IGB_DEFAULT_TXD; - adapter->rx_ring_count = IGB_DEFAULT_RXD; - - /* set default work limits */ - adapter->tx_work_limit = IGB_DEFAULT_TX_WORK; - - adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + - VLAN_HLEN; - - /* Initialize the hardware-specific values */ - if (e1000_setup_init_funcs(hw, TRUE)) { - dev_err(pci_dev_to_dev(pdev), "Hardware Initialization Failure\n"); - return -EIO; - } - - adapter->mac_table = kzalloc(sizeof(struct igb_mac_addr) * - hw->mac.rar_entry_count, - GFP_ATOMIC); - - /* Setup and initialize a copy of the hw vlan table array */ - adapter->shadow_vfta = kzalloc(sizeof(u32) * E1000_VFTA_ENTRIES, - GFP_ATOMIC); -#ifdef NO_KNI - /* These calls may decrease the number of queues */ - if (hw->mac.type < e1000_i210) { - igb_set_sriov_capability(adapter); - } - - if (igb_init_interrupt_scheme(adapter, true)) { - dev_err(pci_dev_to_dev(pdev), "Unable to allocate memory for queues\n"); - return -ENOMEM; - } - - /* Explicitly disable IRQ since the NIC can be in any state. */ - igb_irq_disable(adapter); - - set_bit(__IGB_DOWN, &adapter->state); -#endif - return 0; -} - -/** - * igb_open - Called when a network interface is made active - * @netdev: network interface device structure - * - * Returns 0 on success, negative value on failure - * - * The open entry point is called when a network interface is made - * active by the system (IFF_UP). At this point all resources needed - * for transmit and receive operations are allocated, the interrupt - * handler is registered with the OS, the watchdog timer is started, - * and the stack is notified that the interface is ready. - **/ -static int __igb_open(struct net_device *netdev, bool resuming) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; -#ifdef CONFIG_PM_RUNTIME - struct pci_dev *pdev = adapter->pdev; -#endif /* CONFIG_PM_RUNTIME */ - int err; - int i; - - /* disallow open during test */ - if (test_bit(__IGB_TESTING, &adapter->state)) { - WARN_ON(resuming); - return -EBUSY; - } - -#ifdef CONFIG_PM_RUNTIME - if (!resuming) - pm_runtime_get_sync(&pdev->dev); -#endif /* CONFIG_PM_RUNTIME */ - - netif_carrier_off(netdev); - - /* allocate transmit descriptors */ - err = igb_setup_all_tx_resources(adapter); - if (err) - goto err_setup_tx; - - /* allocate receive descriptors */ - err = igb_setup_all_rx_resources(adapter); - if (err) - goto err_setup_rx; - - igb_power_up_link(adapter); - - /* before we allocate an interrupt, we must be ready to handle it. - * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt - * as soon as we call pci_request_irq, so we have to setup our - * clean_rx handler before we do so. */ - igb_configure(adapter); - - err = igb_request_irq(adapter); - if (err) - goto err_req_irq; - - /* Notify the stack of the actual queue counts. */ - netif_set_real_num_tx_queues(netdev, - adapter->vmdq_pools ? 1 : - adapter->num_tx_queues); - - err = netif_set_real_num_rx_queues(netdev, - adapter->vmdq_pools ? 1 : - adapter->num_rx_queues); - if (err) - goto err_set_queues; - - /* From here on the code is the same as igb_up() */ - clear_bit(__IGB_DOWN, &adapter->state); - - for (i = 0; i < adapter->num_q_vectors; i++) - napi_enable(&(adapter->q_vector[i]->napi)); - igb_configure_lli(adapter); - - /* Clear any pending interrupts. */ - E1000_READ_REG(hw, E1000_ICR); - - igb_irq_enable(adapter); - - /* notify VFs that reset has been completed */ - if (adapter->vfs_allocated_count) { - u32 reg_data = E1000_READ_REG(hw, E1000_CTRL_EXT); - reg_data |= E1000_CTRL_EXT_PFRSTD; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg_data); - } - - netif_tx_start_all_queues(netdev); - - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - schedule_work(&adapter->dma_err_task); - - /* start the watchdog. */ - hw->mac.get_link_status = 1; - schedule_work(&adapter->watchdog_task); - - return E1000_SUCCESS; - -err_set_queues: - igb_free_irq(adapter); -err_req_irq: - igb_release_hw_control(adapter); - igb_power_down_link(adapter); - igb_free_all_rx_resources(adapter); -err_setup_rx: - igb_free_all_tx_resources(adapter); -err_setup_tx: - igb_reset(adapter); - -#ifdef CONFIG_PM_RUNTIME - if (!resuming) - pm_runtime_put(&pdev->dev); -#endif /* CONFIG_PM_RUNTIME */ - - return err; -} - -static int igb_open(struct net_device *netdev) -{ - return __igb_open(netdev, false); -} - -/** - * igb_close - Disables a network interface - * @netdev: network interface device structure - * - * Returns 0, this is not allowed to fail - * - * The close entry point is called when an interface is de-activated - * by the OS. The hardware is still under the driver's control, but - * needs to be disabled. A global MAC reset is issued to stop the - * hardware, and all transmit and receive resources are freed. - **/ -static int __igb_close(struct net_device *netdev, bool suspending) -{ - struct igb_adapter *adapter = netdev_priv(netdev); -#ifdef CONFIG_PM_RUNTIME - struct pci_dev *pdev = adapter->pdev; -#endif /* CONFIG_PM_RUNTIME */ - - WARN_ON(test_bit(__IGB_RESETTING, &adapter->state)); - -#ifdef CONFIG_PM_RUNTIME - if (!suspending) - pm_runtime_get_sync(&pdev->dev); -#endif /* CONFIG_PM_RUNTIME */ - - igb_down(adapter); - - igb_release_hw_control(adapter); - - igb_free_irq(adapter); - - igb_free_all_tx_resources(adapter); - igb_free_all_rx_resources(adapter); - -#ifdef CONFIG_PM_RUNTIME - if (!suspending) - pm_runtime_put_sync(&pdev->dev); -#endif /* CONFIG_PM_RUNTIME */ - - return 0; -} - -static int igb_close(struct net_device *netdev) -{ - return __igb_close(netdev, false); -} - -/** - * igb_setup_tx_resources - allocate Tx resources (Descriptors) - * @tx_ring: tx descriptor ring (for a specific queue) to setup - * - * Return 0 on success, negative on failure - **/ -int igb_setup_tx_resources(struct igb_ring *tx_ring) -{ - struct device *dev = tx_ring->dev; - int size; - - size = sizeof(struct igb_tx_buffer) * tx_ring->count; - tx_ring->tx_buffer_info = vzalloc(size); - if (!tx_ring->tx_buffer_info) - goto err; - - /* round up to nearest 4K */ - tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc); - tx_ring->size = ALIGN(tx_ring->size, 4096); - - tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, - &tx_ring->dma, GFP_KERNEL); - - if (!tx_ring->desc) - goto err; - - tx_ring->next_to_use = 0; - tx_ring->next_to_clean = 0; - - return 0; - -err: - vfree(tx_ring->tx_buffer_info); - dev_err(dev, - "Unable to allocate memory for the transmit descriptor ring\n"); - return -ENOMEM; -} - -/** - * igb_setup_all_tx_resources - wrapper to allocate Tx resources - * (Descriptors) for all queues - * @adapter: board private structure - * - * Return 0 on success, negative on failure - **/ -static int igb_setup_all_tx_resources(struct igb_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - int i, err = 0; - - for (i = 0; i < adapter->num_tx_queues; i++) { - err = igb_setup_tx_resources(adapter->tx_ring[i]); - if (err) { - dev_err(pci_dev_to_dev(pdev), - "Allocation for Tx Queue %u failed\n", i); - for (i--; i >= 0; i--) - igb_free_tx_resources(adapter->tx_ring[i]); - break; - } - } - - return err; -} - -/** - * igb_setup_tctl - configure the transmit control registers - * @adapter: Board private structure - **/ -void igb_setup_tctl(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 tctl; - - /* disable queue 0 which is enabled by default on 82575 and 82576 */ - E1000_WRITE_REG(hw, E1000_TXDCTL(0), 0); - - /* Program the Transmit Control Register */ - tctl = E1000_READ_REG(hw, E1000_TCTL); - tctl &= ~E1000_TCTL_CT; - tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | - (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); - - e1000_config_collision_dist(hw); - - /* Enable transmits */ - tctl |= E1000_TCTL_EN; - - E1000_WRITE_REG(hw, E1000_TCTL, tctl); -} - -static u32 igb_tx_wthresh(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - switch (hw->mac.type) { - case e1000_i354: - return 4; - case e1000_82576: - if (adapter->msix_entries) - return 1; - default: - break; - } - - return 16; -} - -/** - * igb_configure_tx_ring - Configure transmit ring after Reset - * @adapter: board private structure - * @ring: tx ring to configure - * - * Configure a transmit ring after a reset. - **/ -void igb_configure_tx_ring(struct igb_adapter *adapter, - struct igb_ring *ring) -{ - struct e1000_hw *hw = &adapter->hw; - u32 txdctl = 0; - u64 tdba = ring->dma; - int reg_idx = ring->reg_idx; - - /* disable the queue */ - E1000_WRITE_REG(hw, E1000_TXDCTL(reg_idx), 0); - E1000_WRITE_FLUSH(hw); - mdelay(10); - - E1000_WRITE_REG(hw, E1000_TDLEN(reg_idx), - ring->count * sizeof(union e1000_adv_tx_desc)); - E1000_WRITE_REG(hw, E1000_TDBAL(reg_idx), - tdba & 0x00000000ffffffffULL); - E1000_WRITE_REG(hw, E1000_TDBAH(reg_idx), tdba >> 32); - - ring->tail = hw->hw_addr + E1000_TDT(reg_idx); - E1000_WRITE_REG(hw, E1000_TDH(reg_idx), 0); - writel(0, ring->tail); - - txdctl |= IGB_TX_PTHRESH; - txdctl |= IGB_TX_HTHRESH << 8; - txdctl |= igb_tx_wthresh(adapter) << 16; - - txdctl |= E1000_TXDCTL_QUEUE_ENABLE; - E1000_WRITE_REG(hw, E1000_TXDCTL(reg_idx), txdctl); -} - -/** - * igb_configure_tx - Configure transmit Unit after Reset - * @adapter: board private structure - * - * Configure the Tx unit of the MAC after a reset. - **/ -static void igb_configure_tx(struct igb_adapter *adapter) -{ - int i; - - for (i = 0; i < adapter->num_tx_queues; i++) - igb_configure_tx_ring(adapter, adapter->tx_ring[i]); -} - -/** - * igb_setup_rx_resources - allocate Rx resources (Descriptors) - * @rx_ring: rx descriptor ring (for a specific queue) to setup - * - * Returns 0 on success, negative on failure - **/ -int igb_setup_rx_resources(struct igb_ring *rx_ring) -{ - struct device *dev = rx_ring->dev; - int size, desc_len; - - size = sizeof(struct igb_rx_buffer) * rx_ring->count; - rx_ring->rx_buffer_info = vzalloc(size); - if (!rx_ring->rx_buffer_info) - goto err; - - desc_len = sizeof(union e1000_adv_rx_desc); - - /* Round up to nearest 4K */ - rx_ring->size = rx_ring->count * desc_len; - rx_ring->size = ALIGN(rx_ring->size, 4096); - - rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, - &rx_ring->dma, GFP_KERNEL); - - if (!rx_ring->desc) - goto err; - - rx_ring->next_to_alloc = 0; - rx_ring->next_to_clean = 0; - rx_ring->next_to_use = 0; - - return 0; - -err: - vfree(rx_ring->rx_buffer_info); - rx_ring->rx_buffer_info = NULL; - dev_err(dev, "Unable to allocate memory for the receive descriptor" - " ring\n"); - return -ENOMEM; -} - -/** - * igb_setup_all_rx_resources - wrapper to allocate Rx resources - * (Descriptors) for all queues - * @adapter: board private structure - * - * Return 0 on success, negative on failure - **/ -static int igb_setup_all_rx_resources(struct igb_adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - int i, err = 0; - - for (i = 0; i < adapter->num_rx_queues; i++) { - err = igb_setup_rx_resources(adapter->rx_ring[i]); - if (err) { - dev_err(pci_dev_to_dev(pdev), - "Allocation for Rx Queue %u failed\n", i); - for (i--; i >= 0; i--) - igb_free_rx_resources(adapter->rx_ring[i]); - break; - } - } - - return err; -} - -/** - * igb_setup_mrqc - configure the multiple receive queue control registers - * @adapter: Board private structure - **/ -static void igb_setup_mrqc(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 mrqc, rxcsum; - u32 j, num_rx_queues, shift = 0, shift2 = 0; - static const u32 rsskey[10] = { 0xDA565A6D, 0xC20E5B25, 0x3D256741, - 0xB08FA343, 0xCB2BCAD0, 0xB4307BAE, - 0xA32DCB77, 0x0CF23080, 0x3BB7426A, - 0xFA01ACBE }; - - /* Fill out hash function seeds */ - for (j = 0; j < 10; j++) - E1000_WRITE_REG(hw, E1000_RSSRK(j), rsskey[j]); - - num_rx_queues = adapter->rss_queues; - - /* 82575 and 82576 supports 2 RSS queues for VMDq */ - switch (hw->mac.type) { - case e1000_82575: - if (adapter->vmdq_pools) { - shift = 2; - shift2 = 6; - break; - } - shift = 6; - break; - case e1000_82576: - /* 82576 supports 2 RSS queues for SR-IOV */ - if (adapter->vfs_allocated_count || adapter->vmdq_pools) { - shift = 3; - num_rx_queues = 2; - } - break; - default: - break; - } - - /* - * Populate the redirection table 4 entries at a time. To do this - * we are generating the results for n and n+2 and then interleaving - * those with the results with n+1 and n+3. - */ - for (j = 0; j < 32; j++) { - /* first pass generates n and n+2 */ - u32 base = ((j * 0x00040004) + 0x00020000) * num_rx_queues; - u32 reta = (base & 0x07800780) >> (7 - shift); - - /* second pass generates n+1 and n+3 */ - base += 0x00010001 * num_rx_queues; - reta |= (base & 0x07800780) << (1 + shift); - - /* generate 2nd table for 82575 based parts */ - if (shift2) - reta |= (0x01010101 * num_rx_queues) << shift2; - - E1000_WRITE_REG(hw, E1000_RETA(j), reta); - } - - /* - * Disable raw packet checksumming so that RSS hash is placed in - * descriptor on writeback. No need to enable TCP/UDP/IP checksum - * offloads as they are enabled by default - */ - rxcsum = E1000_READ_REG(hw, E1000_RXCSUM); - rxcsum |= E1000_RXCSUM_PCSD; - - if (adapter->hw.mac.type >= e1000_82576) - /* Enable Receive Checksum Offload for SCTP */ - rxcsum |= E1000_RXCSUM_CRCOFL; - - /* Don't need to set TUOFL or IPOFL, they default to 1 */ - E1000_WRITE_REG(hw, E1000_RXCSUM, rxcsum); - - /* Generate RSS hash based on packet types, TCP/UDP - * port numbers and/or IPv4/v6 src and dst addresses - */ - mrqc = E1000_MRQC_RSS_FIELD_IPV4 | - E1000_MRQC_RSS_FIELD_IPV4_TCP | - E1000_MRQC_RSS_FIELD_IPV6 | - E1000_MRQC_RSS_FIELD_IPV6_TCP | - E1000_MRQC_RSS_FIELD_IPV6_TCP_EX; - - if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV4_UDP) - mrqc |= E1000_MRQC_RSS_FIELD_IPV4_UDP; - if (adapter->flags & IGB_FLAG_RSS_FIELD_IPV6_UDP) - mrqc |= E1000_MRQC_RSS_FIELD_IPV6_UDP; - - /* If VMDq is enabled then we set the appropriate mode for that, else - * we default to RSS so that an RSS hash is calculated per packet even - * if we are only using one queue */ - if (adapter->vfs_allocated_count || adapter->vmdq_pools) { - if (hw->mac.type > e1000_82575) { - /* Set the default pool for the PF's first queue */ - u32 vtctl = E1000_READ_REG(hw, E1000_VT_CTL); - vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK | - E1000_VT_CTL_DISABLE_DEF_POOL); - vtctl |= adapter->vfs_allocated_count << - E1000_VT_CTL_DEFAULT_POOL_SHIFT; - E1000_WRITE_REG(hw, E1000_VT_CTL, vtctl); - } else if (adapter->rss_queues > 1) { - /* set default queue for pool 1 to queue 2 */ - E1000_WRITE_REG(hw, E1000_VT_CTL, - adapter->rss_queues << 7); - } - if (adapter->rss_queues > 1) - mrqc |= E1000_MRQC_ENABLE_VMDQ_RSS_2Q; - else - mrqc |= E1000_MRQC_ENABLE_VMDQ; - } else { - mrqc |= E1000_MRQC_ENABLE_RSS_4Q; - } - igb_vmm_control(adapter); - - E1000_WRITE_REG(hw, E1000_MRQC, mrqc); -} - -/** - * igb_setup_rctl - configure the receive control registers - * @adapter: Board private structure - **/ -void igb_setup_rctl(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 rctl; - - rctl = E1000_READ_REG(hw, E1000_RCTL); - - rctl &= ~(3 << E1000_RCTL_MO_SHIFT); - rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); - - rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF | - (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT); - - /* - * enable stripping of CRC. It's unlikely this will break BMC - * redirection as it did with e1000. Newer features require - * that the HW strips the CRC. - */ - rctl |= E1000_RCTL_SECRC; - - /* disable store bad packets and clear size bits. */ - rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256); - - /* enable LPE to prevent packets larger than max_frame_size */ - rctl |= E1000_RCTL_LPE; - - /* disable queue 0 to prevent tail write w/o re-config */ - E1000_WRITE_REG(hw, E1000_RXDCTL(0), 0); - - /* Attention!!! For SR-IOV PF driver operations you must enable - * queue drop for all VF and PF queues to prevent head of line blocking - * if an un-trusted VF does not provide descriptors to hardware. - */ - if (adapter->vfs_allocated_count) { - /* set all queue drop enable bits */ - E1000_WRITE_REG(hw, E1000_QDE, ALL_QUEUES); - } - - E1000_WRITE_REG(hw, E1000_RCTL, rctl); -} - -static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size, - int vfn) -{ - struct e1000_hw *hw = &adapter->hw; - u32 vmolr; - - /* if it isn't the PF check to see if VFs are enabled and - * increase the size to support vlan tags */ - if (vfn < adapter->vfs_allocated_count && - adapter->vf_data[vfn].vlans_enabled) - size += VLAN_HLEN; - -#ifdef CONFIG_IGB_VMDQ_NETDEV - if (vfn >= adapter->vfs_allocated_count) { - int queue = vfn - adapter->vfs_allocated_count; - struct igb_vmdq_adapter *vadapter; - - vadapter = netdev_priv(adapter->vmdq_netdev[queue-1]); - if (vadapter->vlgrp) - size += VLAN_HLEN; - } -#endif - vmolr = E1000_READ_REG(hw, E1000_VMOLR(vfn)); - vmolr &= ~E1000_VMOLR_RLPML_MASK; - vmolr |= size | E1000_VMOLR_LPE; - E1000_WRITE_REG(hw, E1000_VMOLR(vfn), vmolr); - - return 0; -} - -/** - * igb_rlpml_set - set maximum receive packet size - * @adapter: board private structure - * - * Configure maximum receivable packet size. - **/ -static void igb_rlpml_set(struct igb_adapter *adapter) -{ - u32 max_frame_size = adapter->max_frame_size; - struct e1000_hw *hw = &adapter->hw; - u16 pf_id = adapter->vfs_allocated_count; - - if (adapter->vmdq_pools && hw->mac.type != e1000_82575) { - int i; - for (i = 0; i < adapter->vmdq_pools; i++) - igb_set_vf_rlpml(adapter, max_frame_size, pf_id + i); - /* - * If we're in VMDQ or SR-IOV mode, then set global RLPML - * to our max jumbo frame size, in case we need to enable - * jumbo frames on one of the rings later. - * This will not pass over-length frames into the default - * queue because it's gated by the VMOLR.RLPML. - */ - max_frame_size = MAX_JUMBO_FRAME_SIZE; - } - /* Set VF RLPML for the PF device. */ - if (adapter->vfs_allocated_count) - igb_set_vf_rlpml(adapter, max_frame_size, pf_id); - - E1000_WRITE_REG(hw, E1000_RLPML, max_frame_size); -} - -static inline void igb_set_vf_vlan_strip(struct igb_adapter *adapter, - int vfn, bool enable) -{ - struct e1000_hw *hw = &adapter->hw; - u32 val; - void __iomem *reg; - - if (hw->mac.type < e1000_82576) - return; - - if (hw->mac.type == e1000_i350) - reg = hw->hw_addr + E1000_DVMOLR(vfn); - else - reg = hw->hw_addr + E1000_VMOLR(vfn); - - val = readl(reg); - if (enable) - val |= E1000_VMOLR_STRVLAN; - else - val &= ~(E1000_VMOLR_STRVLAN); - writel(val, reg); -} -static inline void igb_set_vmolr(struct igb_adapter *adapter, - int vfn, bool aupe) -{ - struct e1000_hw *hw = &adapter->hw; - u32 vmolr; - - /* - * This register exists only on 82576 and newer so if we are older then - * we should exit and do nothing - */ - if (hw->mac.type < e1000_82576) - return; - - vmolr = E1000_READ_REG(hw, E1000_VMOLR(vfn)); - - if (aupe) - vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */ - else - vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */ - - /* clear all bits that might not be set */ - vmolr &= ~E1000_VMOLR_RSSE; - - if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count) - vmolr |= E1000_VMOLR_RSSE; /* enable RSS */ - - vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */ - vmolr |= E1000_VMOLR_LPE; /* Accept long packets */ - - E1000_WRITE_REG(hw, E1000_VMOLR(vfn), vmolr); -} - -/** - * igb_configure_rx_ring - Configure a receive ring after Reset - * @adapter: board private structure - * @ring: receive ring to be configured - * - * Configure the Rx unit of the MAC after a reset. - **/ -void igb_configure_rx_ring(struct igb_adapter *adapter, - struct igb_ring *ring) -{ - struct e1000_hw *hw = &adapter->hw; - u64 rdba = ring->dma; - int reg_idx = ring->reg_idx; - u32 srrctl = 0, rxdctl = 0; - -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - /* - * RLPML prevents us from receiving a frame larger than max_frame so - * it is safe to just set the rx_buffer_len to max_frame without the - * risk of an skb over panic. - */ - ring->rx_buffer_len = max_t(u32, adapter->max_frame_size, - MAXIMUM_ETHERNET_VLAN_SIZE); - -#endif - /* disable the queue */ - E1000_WRITE_REG(hw, E1000_RXDCTL(reg_idx), 0); - - /* Set DMA base address registers */ - E1000_WRITE_REG(hw, E1000_RDBAL(reg_idx), - rdba & 0x00000000ffffffffULL); - E1000_WRITE_REG(hw, E1000_RDBAH(reg_idx), rdba >> 32); - E1000_WRITE_REG(hw, E1000_RDLEN(reg_idx), - ring->count * sizeof(union e1000_adv_rx_desc)); - - /* initialize head and tail */ - ring->tail = hw->hw_addr + E1000_RDT(reg_idx); - E1000_WRITE_REG(hw, E1000_RDH(reg_idx), 0); - writel(0, ring->tail); - - /* reset next-to- use/clean to place SW in sync with hardwdare */ - ring->next_to_clean = 0; - ring->next_to_use = 0; -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - ring->next_to_alloc = 0; - -#endif - /* set descriptor configuration */ -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - srrctl = IGB_RX_HDR_LEN << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; - srrctl |= IGB_RX_BUFSZ >> E1000_SRRCTL_BSIZEPKT_SHIFT; -#else /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ - srrctl = ALIGN(ring->rx_buffer_len, 1024) >> - E1000_SRRCTL_BSIZEPKT_SHIFT; -#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ - srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF; -#ifdef HAVE_PTP_1588_CLOCK - if (hw->mac.type >= e1000_82580) - srrctl |= E1000_SRRCTL_TIMESTAMP; -#endif /* HAVE_PTP_1588_CLOCK */ - /* - * We should set the drop enable bit if: - * SR-IOV is enabled - * or - * Flow Control is disabled and number of RX queues > 1 - * - * This allows us to avoid head of line blocking for security - * and performance reasons. - */ - if (adapter->vfs_allocated_count || - (adapter->num_rx_queues > 1 && - (hw->fc.requested_mode == e1000_fc_none || - hw->fc.requested_mode == e1000_fc_rx_pause))) - srrctl |= E1000_SRRCTL_DROP_EN; - - E1000_WRITE_REG(hw, E1000_SRRCTL(reg_idx), srrctl); - - /* set filtering for VMDQ pools */ - igb_set_vmolr(adapter, reg_idx & 0x7, true); - - rxdctl |= IGB_RX_PTHRESH; - rxdctl |= IGB_RX_HTHRESH << 8; - rxdctl |= IGB_RX_WTHRESH << 16; - - /* enable receive descriptor fetching */ - rxdctl |= E1000_RXDCTL_QUEUE_ENABLE; - E1000_WRITE_REG(hw, E1000_RXDCTL(reg_idx), rxdctl); -} - -/** - * igb_configure_rx - Configure receive Unit after Reset - * @adapter: board private structure - * - * Configure the Rx unit of the MAC after a reset. - **/ -static void igb_configure_rx(struct igb_adapter *adapter) -{ - int i; - - /* set UTA to appropriate mode */ - igb_set_uta(adapter); - - igb_full_sync_mac_table(adapter); - /* Setup the HW Rx Head and Tail Descriptor Pointers and - * the Base and Length of the Rx Descriptor Ring */ - for (i = 0; i < adapter->num_rx_queues; i++) - igb_configure_rx_ring(adapter, adapter->rx_ring[i]); -} - -/** - * igb_free_tx_resources - Free Tx Resources per Queue - * @tx_ring: Tx descriptor ring for a specific queue - * - * Free all transmit software resources - **/ -void igb_free_tx_resources(struct igb_ring *tx_ring) -{ - igb_clean_tx_ring(tx_ring); - - vfree(tx_ring->tx_buffer_info); - tx_ring->tx_buffer_info = NULL; - - /* if not set, then don't free */ - if (!tx_ring->desc) - return; - - dma_free_coherent(tx_ring->dev, tx_ring->size, - tx_ring->desc, tx_ring->dma); - - tx_ring->desc = NULL; -} - -/** - * igb_free_all_tx_resources - Free Tx Resources for All Queues - * @adapter: board private structure - * - * Free all transmit software resources - **/ -static void igb_free_all_tx_resources(struct igb_adapter *adapter) -{ - int i; - - for (i = 0; i < adapter->num_tx_queues; i++) - igb_free_tx_resources(adapter->tx_ring[i]); -} - -void igb_unmap_and_free_tx_resource(struct igb_ring *ring, - struct igb_tx_buffer *tx_buffer) -{ - if (tx_buffer->skb) { - dev_kfree_skb_any(tx_buffer->skb); - if (dma_unmap_len(tx_buffer, len)) - dma_unmap_single(ring->dev, - dma_unmap_addr(tx_buffer, dma), - dma_unmap_len(tx_buffer, len), - DMA_TO_DEVICE); - } else if (dma_unmap_len(tx_buffer, len)) { - dma_unmap_page(ring->dev, - dma_unmap_addr(tx_buffer, dma), - dma_unmap_len(tx_buffer, len), - DMA_TO_DEVICE); - } - tx_buffer->next_to_watch = NULL; - tx_buffer->skb = NULL; - dma_unmap_len_set(tx_buffer, len, 0); - /* buffer_info must be completely set up in the transmit path */ -} - -/** - * igb_clean_tx_ring - Free Tx Buffers - * @tx_ring: ring to be cleaned - **/ -static void igb_clean_tx_ring(struct igb_ring *tx_ring) -{ - struct igb_tx_buffer *buffer_info; - unsigned long size; - u16 i; - - if (!tx_ring->tx_buffer_info) - return; - /* Free all the Tx ring sk_buffs */ - - for (i = 0; i < tx_ring->count; i++) { - buffer_info = &tx_ring->tx_buffer_info[i]; - igb_unmap_and_free_tx_resource(tx_ring, buffer_info); - } - - netdev_tx_reset_queue(txring_txq(tx_ring)); - - size = sizeof(struct igb_tx_buffer) * tx_ring->count; - memset(tx_ring->tx_buffer_info, 0, size); - - /* Zero out the descriptor ring */ - memset(tx_ring->desc, 0, tx_ring->size); - - tx_ring->next_to_use = 0; - tx_ring->next_to_clean = 0; -} - -/** - * igb_clean_all_tx_rings - Free Tx Buffers for all queues - * @adapter: board private structure - **/ -static void igb_clean_all_tx_rings(struct igb_adapter *adapter) -{ - int i; - - for (i = 0; i < adapter->num_tx_queues; i++) - igb_clean_tx_ring(adapter->tx_ring[i]); -} - -/** - * igb_free_rx_resources - Free Rx Resources - * @rx_ring: ring to clean the resources from - * - * Free all receive software resources - **/ -void igb_free_rx_resources(struct igb_ring *rx_ring) -{ - igb_clean_rx_ring(rx_ring); - - vfree(rx_ring->rx_buffer_info); - rx_ring->rx_buffer_info = NULL; - - /* if not set, then don't free */ - if (!rx_ring->desc) - return; - - dma_free_coherent(rx_ring->dev, rx_ring->size, - rx_ring->desc, rx_ring->dma); - - rx_ring->desc = NULL; -} - -/** - * igb_free_all_rx_resources - Free Rx Resources for All Queues - * @adapter: board private structure - * - * Free all receive software resources - **/ -static void igb_free_all_rx_resources(struct igb_adapter *adapter) -{ - int i; - - for (i = 0; i < adapter->num_rx_queues; i++) - igb_free_rx_resources(adapter->rx_ring[i]); -} - -/** - * igb_clean_rx_ring - Free Rx Buffers per Queue - * @rx_ring: ring to free buffers from - **/ -void igb_clean_rx_ring(struct igb_ring *rx_ring) -{ - unsigned long size; - u16 i; - - if (!rx_ring->rx_buffer_info) - return; - -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - if (rx_ring->skb) - dev_kfree_skb(rx_ring->skb); - rx_ring->skb = NULL; - -#endif - /* Free all the Rx ring sk_buffs */ - for (i = 0; i < rx_ring->count; i++) { - struct igb_rx_buffer *buffer_info = &rx_ring->rx_buffer_info[i]; -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - if (buffer_info->dma) { - dma_unmap_single(rx_ring->dev, - buffer_info->dma, - rx_ring->rx_buffer_len, - DMA_FROM_DEVICE); - buffer_info->dma = 0; - } - - if (buffer_info->skb) { - dev_kfree_skb(buffer_info->skb); - buffer_info->skb = NULL; - } -#else - if (!buffer_info->page) - continue; - - dma_unmap_page(rx_ring->dev, - buffer_info->dma, - PAGE_SIZE, - DMA_FROM_DEVICE); - __free_page(buffer_info->page); - - buffer_info->page = NULL; -#endif - } - - size = sizeof(struct igb_rx_buffer) * rx_ring->count; - memset(rx_ring->rx_buffer_info, 0, size); - - /* Zero out the descriptor ring */ - memset(rx_ring->desc, 0, rx_ring->size); - - rx_ring->next_to_alloc = 0; - rx_ring->next_to_clean = 0; - rx_ring->next_to_use = 0; -} - -/** - * igb_clean_all_rx_rings - Free Rx Buffers for all queues - * @adapter: board private structure - **/ -static void igb_clean_all_rx_rings(struct igb_adapter *adapter) -{ - int i; - - for (i = 0; i < adapter->num_rx_queues; i++) - igb_clean_rx_ring(adapter->rx_ring[i]); -} - -/** - * igb_set_mac - Change the Ethernet Address of the NIC - * @netdev: network interface device structure - * @p: pointer to an address structure - * - * Returns 0 on success, negative on failure - **/ -static int igb_set_mac(struct net_device *netdev, void *p) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - struct sockaddr *addr = p; - - if (!is_valid_ether_addr(addr->sa_data)) - return -EADDRNOTAVAIL; - - igb_del_mac_filter(adapter, hw->mac.addr, - adapter->vfs_allocated_count); - memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); - memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); - - /* set the correct pool for the new PF MAC address in entry 0 */ - return igb_add_mac_filter(adapter, hw->mac.addr, - adapter->vfs_allocated_count); -} - -/** - * igb_write_mc_addr_list - write multicast addresses to MTA - * @netdev: network interface device structure - * - * Writes multicast address list to the MTA hash table. - * Returns: -ENOMEM on failure - * 0 on no addresses written - * X on writing X addresses to MTA - **/ -int igb_write_mc_addr_list(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; -#ifdef NETDEV_HW_ADDR_T_MULTICAST - struct netdev_hw_addr *ha; -#else - struct dev_mc_list *ha; -#endif - u8 *mta_list; - int i, count; -#ifdef CONFIG_IGB_VMDQ_NETDEV - int vm; -#endif - count = netdev_mc_count(netdev); -#ifdef CONFIG_IGB_VMDQ_NETDEV - for (vm = 1; vm < adapter->vmdq_pools; vm++) { - if (!adapter->vmdq_netdev[vm]) - break; - if (!netif_running(adapter->vmdq_netdev[vm])) - continue; - count += netdev_mc_count(adapter->vmdq_netdev[vm]); - } -#endif - - if (!count) { - e1000_update_mc_addr_list(hw, NULL, 0); - return 0; - } - mta_list = kzalloc(count * 6, GFP_ATOMIC); - if (!mta_list) - return -ENOMEM; - - /* The shared function expects a packed array of only addresses. */ - i = 0; - netdev_for_each_mc_addr(ha, netdev) -#ifdef NETDEV_HW_ADDR_T_MULTICAST - memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN); -#else - memcpy(mta_list + (i++ * ETH_ALEN), ha->dmi_addr, ETH_ALEN); -#endif -#ifdef CONFIG_IGB_VMDQ_NETDEV - for (vm = 1; vm < adapter->vmdq_pools; vm++) { - if (!adapter->vmdq_netdev[vm]) - break; - if (!netif_running(adapter->vmdq_netdev[vm]) || - !netdev_mc_count(adapter->vmdq_netdev[vm])) - continue; - netdev_for_each_mc_addr(ha, adapter->vmdq_netdev[vm]) -#ifdef NETDEV_HW_ADDR_T_MULTICAST - memcpy(mta_list + (i++ * ETH_ALEN), - ha->addr, ETH_ALEN); -#else - memcpy(mta_list + (i++ * ETH_ALEN), - ha->dmi_addr, ETH_ALEN); -#endif - } -#endif - e1000_update_mc_addr_list(hw, mta_list, i); - kfree(mta_list); - - return count; -} - -void igb_rar_set(struct igb_adapter *adapter, u32 index) -{ - u32 rar_low, rar_high; - struct e1000_hw *hw = &adapter->hw; - u8 *addr = adapter->mac_table[index].addr; - /* HW expects these in little endian so we reverse the byte order - * from network order (big endian) to little endian - */ - rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | - ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); - rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); - - /* Indicate to hardware the Address is Valid. */ - if (adapter->mac_table[index].state & IGB_MAC_STATE_IN_USE) - rar_high |= E1000_RAH_AV; - - if (hw->mac.type == e1000_82575) - rar_high |= E1000_RAH_POOL_1 * adapter->mac_table[index].queue; - else - rar_high |= E1000_RAH_POOL_1 << adapter->mac_table[index].queue; - - E1000_WRITE_REG(hw, E1000_RAL(index), rar_low); - E1000_WRITE_FLUSH(hw); - E1000_WRITE_REG(hw, E1000_RAH(index), rar_high); - E1000_WRITE_FLUSH(hw); -} - -void igb_full_sync_mac_table(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - for (i = 0; i < hw->mac.rar_entry_count; i++) { - igb_rar_set(adapter, i); - } -} - -void igb_sync_mac_table(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - for (i = 0; i < hw->mac.rar_entry_count; i++) { - if (adapter->mac_table[i].state & IGB_MAC_STATE_MODIFIED) - igb_rar_set(adapter, i); - adapter->mac_table[i].state &= ~(IGB_MAC_STATE_MODIFIED); - } -} - -int igb_available_rars(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int i, count = 0; - - for (i = 0; i < hw->mac.rar_entry_count; i++) { - if (adapter->mac_table[i].state == 0) - count++; - } - return count; -} - -#ifdef HAVE_SET_RX_MODE -/** - * igb_write_uc_addr_list - write unicast addresses to RAR table - * @netdev: network interface device structure - * - * Writes unicast address list to the RAR table. - * Returns: -ENOMEM on failure/insufficient address space - * 0 on no addresses written - * X on writing X addresses to the RAR table - **/ -static int igb_write_uc_addr_list(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - unsigned int vfn = adapter->vfs_allocated_count; - int count = 0; - - /* return ENOMEM indicating insufficient memory for addresses */ - if (netdev_uc_count(netdev) > igb_available_rars(adapter)) - return -ENOMEM; - if (!netdev_uc_empty(netdev)) { -#ifdef NETDEV_HW_ADDR_T_UNICAST - struct netdev_hw_addr *ha; -#else - struct dev_mc_list *ha; -#endif - netdev_for_each_uc_addr(ha, netdev) { -#ifdef NETDEV_HW_ADDR_T_UNICAST - igb_del_mac_filter(adapter, ha->addr, vfn); - igb_add_mac_filter(adapter, ha->addr, vfn); -#else - igb_del_mac_filter(adapter, ha->da_addr, vfn); - igb_add_mac_filter(adapter, ha->da_addr, vfn); -#endif - count++; - } - } - return count; -} - -#endif /* HAVE_SET_RX_MODE */ -/** - * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set - * @netdev: network interface device structure - * - * The set_rx_mode entry point is called whenever the unicast or multicast - * address lists or the network interface flags are updated. This routine is - * responsible for configuring the hardware for proper unicast, multicast, - * promiscuous mode, and all-multi behavior. - **/ -static void igb_set_rx_mode(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - unsigned int vfn = adapter->vfs_allocated_count; - u32 rctl, vmolr = 0; - int count; - - /* Check for Promiscuous and All Multicast modes */ - rctl = E1000_READ_REG(hw, E1000_RCTL); - - /* clear the effected bits */ - rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE); - - if (netdev->flags & IFF_PROMISC) { - rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); - vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME); - /* retain VLAN HW filtering if in VT mode */ - if (adapter->vfs_allocated_count || adapter->vmdq_pools) - rctl |= E1000_RCTL_VFE; - } else { - if (netdev->flags & IFF_ALLMULTI) { - rctl |= E1000_RCTL_MPE; - vmolr |= E1000_VMOLR_MPME; - } else { - /* - * Write addresses to the MTA, if the attempt fails - * then we should just turn on promiscuous mode so - * that we can at least receive multicast traffic - */ - count = igb_write_mc_addr_list(netdev); - if (count < 0) { - rctl |= E1000_RCTL_MPE; - vmolr |= E1000_VMOLR_MPME; - } else if (count) { - vmolr |= E1000_VMOLR_ROMPE; - } - } -#ifdef HAVE_SET_RX_MODE - /* - * Write addresses to available RAR registers, if there is not - * sufficient space to store all the addresses then enable - * unicast promiscuous mode - */ - count = igb_write_uc_addr_list(netdev); - if (count < 0) { - rctl |= E1000_RCTL_UPE; - vmolr |= E1000_VMOLR_ROPE; - } -#endif /* HAVE_SET_RX_MODE */ - rctl |= E1000_RCTL_VFE; - } - E1000_WRITE_REG(hw, E1000_RCTL, rctl); - - /* - * In order to support SR-IOV and eventually VMDq it is necessary to set - * the VMOLR to enable the appropriate modes. Without this workaround - * we will have issues with VLAN tag stripping not being done for frames - * that are only arriving because we are the default pool - */ - if (hw->mac.type < e1000_82576) - return; - - vmolr |= E1000_READ_REG(hw, E1000_VMOLR(vfn)) & - ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE); - E1000_WRITE_REG(hw, E1000_VMOLR(vfn), vmolr); - igb_restore_vf_multicasts(adapter); -} - -static void igb_check_wvbr(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 wvbr = 0; - - switch (hw->mac.type) { - case e1000_82576: - case e1000_i350: - if (!(wvbr = E1000_READ_REG(hw, E1000_WVBR))) - return; - break; - default: - break; - } - - adapter->wvbr |= wvbr; -} - -#define IGB_STAGGERED_QUEUE_OFFSET 8 - -static void igb_spoof_check(struct igb_adapter *adapter) -{ - int j; - - if (!adapter->wvbr) - return; - - switch (adapter->hw.mac.type) { - case e1000_82576: - for (j = 0; j < adapter->vfs_allocated_count; j++) { - if (adapter->wvbr & (1 << j) || - adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) { - DPRINTK(DRV, WARNING, - "Spoof event(s) detected on VF %d\n", j); - adapter->wvbr &= - ~((1 << j) | - (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))); - } - } - break; - case e1000_i350: - for (j = 0; j < adapter->vfs_allocated_count; j++) { - if (adapter->wvbr & (1 << j)) { - DPRINTK(DRV, WARNING, - "Spoof event(s) detected on VF %d\n", j); - adapter->wvbr &= ~(1 << j); - } - } - break; - default: - break; - } -} - -/* Need to wait a few seconds after link up to get diagnostic information from - * the phy */ -#ifdef HAVE_TIMER_SETUP -static void igb_update_phy_info(struct timer_list *t) -{ - struct igb_adapter *adapter = from_timer(adapter, t, phy_info_timer); -#else -static void igb_update_phy_info(unsigned long data) -{ - struct igb_adapter *adapter = (struct igb_adapter *) data; -#endif - e1000_get_phy_info(&adapter->hw); -} - -/** - * igb_has_link - check shared code for link and determine up/down - * @adapter: pointer to driver private info - **/ -bool igb_has_link(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - bool link_active = FALSE; - - /* get_link_status is set on LSC (link status) interrupt or - * rx sequence error interrupt. get_link_status will stay - * false until the e1000_check_for_link establishes link - * for copper adapters ONLY - */ - switch (hw->phy.media_type) { - case e1000_media_type_copper: - if (!hw->mac.get_link_status) - return true; - case e1000_media_type_internal_serdes: - e1000_check_for_link(hw); - link_active = !hw->mac.get_link_status; - break; - case e1000_media_type_unknown: - default: - break; - } - - if (((hw->mac.type == e1000_i210) || - (hw->mac.type == e1000_i211)) && - (hw->phy.id == I210_I_PHY_ID)) { - if (!netif_carrier_ok(adapter->netdev)) { - adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; - } else if (!(adapter->flags & IGB_FLAG_NEED_LINK_UPDATE)) { - adapter->flags |= IGB_FLAG_NEED_LINK_UPDATE; - adapter->link_check_timeout = jiffies; - } - } - - return link_active; -} - -/** - * igb_watchdog - Timer Call-back - * @data: pointer to adapter cast into an unsigned long - **/ -#ifdef HAVE_TIMER_SETUP -static void igb_watchdog(struct timer_list *t) -{ - struct igb_adapter *adapter = from_timer(adapter, t, watchdog_timer); -#else -static void igb_watchdog(unsigned long data) -{ - struct igb_adapter *adapter = (struct igb_adapter *)data; -#endif - /* Do the rest outside of interrupt context */ - schedule_work(&adapter->watchdog_task); -} - -static void igb_watchdog_task(struct work_struct *work) -{ - struct igb_adapter *adapter = container_of(work, - struct igb_adapter, - watchdog_task); - struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - u32 link; - int i; - u32 thstat, ctrl_ext; - u32 connsw; - - link = igb_has_link(adapter); - /* Force link down if we have fiber to swap to */ - if (adapter->flags & IGB_FLAG_MAS_ENABLE) { - if (hw->phy.media_type == e1000_media_type_copper) { - connsw = E1000_READ_REG(hw, E1000_CONNSW); - if (!(connsw & E1000_CONNSW_AUTOSENSE_EN)) - link = 0; - } - } - - if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE) { - if (time_after(jiffies, (adapter->link_check_timeout + HZ))) - adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE; - else - link = FALSE; - } - - if (link) { - /* Perform a reset if the media type changed. */ - if (hw->dev_spec._82575.media_changed) { - hw->dev_spec._82575.media_changed = false; - adapter->flags |= IGB_FLAG_MEDIA_RESET; - igb_reset(adapter); - } - - /* Cancel scheduled suspend requests. */ - pm_runtime_resume(netdev->dev.parent); - - if (!netif_carrier_ok(netdev)) { - u32 ctrl; - e1000_get_speed_and_duplex(hw, - &adapter->link_speed, - &adapter->link_duplex); - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - /* Links status message must follow this format */ - printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, " - "Flow Control: %s\n", - netdev->name, - adapter->link_speed, - adapter->link_duplex == FULL_DUPLEX ? - "Full Duplex" : "Half Duplex", - ((ctrl & E1000_CTRL_TFCE) && - (ctrl & E1000_CTRL_RFCE)) ? "RX/TX": - ((ctrl & E1000_CTRL_RFCE) ? "RX" : - ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None"))); - /* adjust timeout factor according to speed/duplex */ - adapter->tx_timeout_factor = 1; - switch (adapter->link_speed) { - case SPEED_10: - adapter->tx_timeout_factor = 14; - break; - case SPEED_100: - /* maybe add some timeout factor ? */ - break; - default: - break; - } - - netif_carrier_on(netdev); - netif_tx_wake_all_queues(netdev); - - igb_ping_all_vfs(adapter); -#ifdef IFLA_VF_MAX - igb_check_vf_rate_limit(adapter); -#endif /* IFLA_VF_MAX */ - - /* link state has changed, schedule phy info update */ - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->phy_info_timer, - round_jiffies(jiffies + 2 * HZ)); - } - } else { - if (netif_carrier_ok(netdev)) { - adapter->link_speed = 0; - adapter->link_duplex = 0; - /* check for thermal sensor event on i350 */ - if (hw->mac.type == e1000_i350) { - thstat = E1000_READ_REG(hw, E1000_THSTAT); - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - if ((hw->phy.media_type == - e1000_media_type_copper) && - !(ctrl_ext & - E1000_CTRL_EXT_LINK_MODE_SGMII)) { - if (thstat & E1000_THSTAT_PWR_DOWN) { - printk(KERN_ERR "igb: %s The " - "network adapter was stopped " - "because it overheated.\n", - netdev->name); - } - if (thstat & E1000_THSTAT_LINK_THROTTLE) { - printk(KERN_INFO - "igb: %s The network " - "adapter supported " - "link speed " - "was downshifted " - "because it " - "overheated.\n", - netdev->name); - } - } - } - - /* Links status message must follow this format */ - printk(KERN_INFO "igb: %s NIC Link is Down\n", - netdev->name); - netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); - - igb_ping_all_vfs(adapter); - - /* link state has changed, schedule phy info update */ - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->phy_info_timer, - round_jiffies(jiffies + 2 * HZ)); - /* link is down, time to check for alternate media */ - if (adapter->flags & IGB_FLAG_MAS_ENABLE) { - igb_check_swap_media(adapter); - if (adapter->flags & IGB_FLAG_MEDIA_RESET) { - schedule_work(&adapter->reset_task); - /* return immediately */ - return; - } - } - pm_schedule_suspend(netdev->dev.parent, - MSEC_PER_SEC * 5); - - /* also check for alternate media here */ - } else if (!netif_carrier_ok(netdev) && - (adapter->flags & IGB_FLAG_MAS_ENABLE)) { - hw->mac.ops.power_up_serdes(hw); - igb_check_swap_media(adapter); - if (adapter->flags & IGB_FLAG_MEDIA_RESET) { - schedule_work(&adapter->reset_task); - /* return immediately */ - return; - } - } - } - - igb_update_stats(adapter); - - for (i = 0; i < adapter->num_tx_queues; i++) { - struct igb_ring *tx_ring = adapter->tx_ring[i]; - if (!netif_carrier_ok(netdev)) { - /* We've lost link, so the controller stops DMA, - * but we've got queued Tx work that's never going - * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). */ - if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) { - adapter->tx_timeout_count++; - schedule_work(&adapter->reset_task); - /* return immediately since reset is imminent */ - return; - } - } - - /* Force detection of hung controller every watchdog period */ - set_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags); - } - - /* Cause software interrupt to ensure rx ring is cleaned */ - if (adapter->msix_entries) { - u32 eics = 0; - for (i = 0; i < adapter->num_q_vectors; i++) - eics |= adapter->q_vector[i]->eims_value; - E1000_WRITE_REG(hw, E1000_EICS, eics); - } else { - E1000_WRITE_REG(hw, E1000_ICS, E1000_ICS_RXDMT0); - } - - igb_spoof_check(adapter); - - /* Reset the timer */ - if (!test_bit(__IGB_DOWN, &adapter->state)) { - if (adapter->flags & IGB_FLAG_NEED_LINK_UPDATE) - mod_timer(&adapter->watchdog_timer, - round_jiffies(jiffies + HZ)); - else - mod_timer(&adapter->watchdog_timer, - round_jiffies(jiffies + 2 * HZ)); - } -} - -static void igb_dma_err_task(struct work_struct *work) -{ - struct igb_adapter *adapter = container_of(work, - struct igb_adapter, - dma_err_task); - int vf; - struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; - u32 hgptc; - u32 ciaa, ciad; - - hgptc = E1000_READ_REG(hw, E1000_HGPTC); - if (hgptc) /* If incrementing then no need for the check below */ - goto dma_timer_reset; - /* - * Check to see if a bad DMA write target from an errant or - * malicious VF has caused a PCIe error. If so then we can - * issue a VFLR to the offending VF(s) and then resume without - * requesting a full slot reset. - */ - - for (vf = 0; vf < adapter->vfs_allocated_count; vf++) { - ciaa = (vf << 16) | 0x80000000; - /* 32 bit read so align, we really want status at offset 6 */ - ciaa |= PCI_COMMAND; - E1000_WRITE_REG(hw, E1000_CIAA, ciaa); - ciad = E1000_READ_REG(hw, E1000_CIAD); - ciaa &= 0x7FFFFFFF; - /* disable debug mode asap after reading data */ - E1000_WRITE_REG(hw, E1000_CIAA, ciaa); - /* Get the upper 16 bits which will be the PCI status reg */ - ciad >>= 16; - if (ciad & (PCI_STATUS_REC_MASTER_ABORT | - PCI_STATUS_REC_TARGET_ABORT | - PCI_STATUS_SIG_SYSTEM_ERROR)) { - netdev_err(netdev, "VF %d suffered error\n", vf); - /* Issue VFLR */ - ciaa = (vf << 16) | 0x80000000; - ciaa |= 0xA8; - E1000_WRITE_REG(hw, E1000_CIAA, ciaa); - ciad = 0x00008000; /* VFLR */ - E1000_WRITE_REG(hw, E1000_CIAD, ciad); - ciaa &= 0x7FFFFFFF; - E1000_WRITE_REG(hw, E1000_CIAA, ciaa); - } - } -dma_timer_reset: - /* Reset the timer */ - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->dma_err_timer, - round_jiffies(jiffies + HZ / 10)); -} - -/** - * igb_dma_err_timer - Timer Call-back - * @data: pointer to adapter cast into an unsigned long - **/ -#ifdef HAVE_TIMER_SETUP -static void igb_dma_err_timer(struct timer_list *t) -{ - struct igb_adapter *adapter = from_timer(adapter, t, dma_err_timer); -#else -static void igb_dma_err_timer(unsigned long data) -{ - struct igb_adapter *adapter = (struct igb_adapter *)data; -#endif - /* Do the rest outside of interrupt context */ - schedule_work(&adapter->dma_err_task); -} - -enum latency_range { - lowest_latency = 0, - low_latency = 1, - bulk_latency = 2, - latency_invalid = 255 -}; - -/** - * igb_update_ring_itr - update the dynamic ITR value based on packet size - * - * Stores a new ITR value based on strictly on packet size. This - * algorithm is less sophisticated than that used in igb_update_itr, - * due to the difficulty of synchronizing statistics across multiple - * receive rings. The divisors and thresholds used by this function - * were determined based on theoretical maximum wire speed and testing - * data, in order to minimize response time while increasing bulk - * throughput. - * This functionality is controlled by the InterruptThrottleRate module - * parameter (see igb_param.c) - * NOTE: This function is called only when operating in a multiqueue - * receive environment. - * @q_vector: pointer to q_vector - **/ -static void igb_update_ring_itr(struct igb_q_vector *q_vector) -{ - int new_val = q_vector->itr_val; - int avg_wire_size = 0; - struct igb_adapter *adapter = q_vector->adapter; - unsigned int packets; - - /* For non-gigabit speeds, just fix the interrupt rate at 4000 - * ints/sec - ITR timer value of 120 ticks. - */ - switch (adapter->link_speed) { - case SPEED_10: - case SPEED_100: - new_val = IGB_4K_ITR; - goto set_itr_val; - default: - break; - } - - packets = q_vector->rx.total_packets; - if (packets) - avg_wire_size = q_vector->rx.total_bytes / packets; - - packets = q_vector->tx.total_packets; - if (packets) - avg_wire_size = max_t(u32, avg_wire_size, - q_vector->tx.total_bytes / packets); - - /* if avg_wire_size isn't set no work was done */ - if (!avg_wire_size) - goto clear_counts; - - /* Add 24 bytes to size to account for CRC, preamble, and gap */ - avg_wire_size += 24; - - /* Don't starve jumbo frames */ - avg_wire_size = min(avg_wire_size, 3000); - - /* Give a little boost to mid-size frames */ - if ((avg_wire_size > 300) && (avg_wire_size < 1200)) - new_val = avg_wire_size / 3; - else - new_val = avg_wire_size / 2; - - /* conservative mode (itr 3) eliminates the lowest_latency setting */ - if (new_val < IGB_20K_ITR && - ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || - (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) - new_val = IGB_20K_ITR; - -set_itr_val: - if (new_val != q_vector->itr_val) { - q_vector->itr_val = new_val; - q_vector->set_itr = 1; - } -clear_counts: - q_vector->rx.total_bytes = 0; - q_vector->rx.total_packets = 0; - q_vector->tx.total_bytes = 0; - q_vector->tx.total_packets = 0; -} - -/** - * igb_update_itr - update the dynamic ITR value based on statistics - * Stores a new ITR value based on packets and byte - * counts during the last interrupt. The advantage of per interrupt - * computation is faster updates and more accurate ITR for the current - * traffic pattern. Constants in this function were computed - * based on theoretical maximum wire speed and thresholds were set based - * on testing data as well as attempting to minimize response time - * while increasing bulk throughput. - * this functionality is controlled by the InterruptThrottleRate module - * parameter (see igb_param.c) - * NOTE: These calculations are only valid when operating in a single- - * queue environment. - * @q_vector: pointer to q_vector - * @ring_container: ring info to update the itr for - **/ -static void igb_update_itr(struct igb_q_vector *q_vector, - struct igb_ring_container *ring_container) -{ - unsigned int packets = ring_container->total_packets; - unsigned int bytes = ring_container->total_bytes; - u8 itrval = ring_container->itr; - - /* no packets, exit with status unchanged */ - if (packets == 0) - return; - - switch (itrval) { - case lowest_latency: - /* handle TSO and jumbo frames */ - if (bytes/packets > 8000) - itrval = bulk_latency; - else if ((packets < 5) && (bytes > 512)) - itrval = low_latency; - break; - case low_latency: /* 50 usec aka 20000 ints/s */ - if (bytes > 10000) { - /* this if handles the TSO accounting */ - if (bytes/packets > 8000) { - itrval = bulk_latency; - } else if ((packets < 10) || ((bytes/packets) > 1200)) { - itrval = bulk_latency; - } else if (packets > 35) { - itrval = lowest_latency; - } - } else if (bytes/packets > 2000) { - itrval = bulk_latency; - } else if (packets <= 2 && bytes < 512) { - itrval = lowest_latency; - } - break; - case bulk_latency: /* 250 usec aka 4000 ints/s */ - if (bytes > 25000) { - if (packets > 35) - itrval = low_latency; - } else if (bytes < 1500) { - itrval = low_latency; - } - break; - } - - /* clear work counters since we have the values we need */ - ring_container->total_bytes = 0; - ring_container->total_packets = 0; - - /* write updated itr to ring container */ - ring_container->itr = itrval; -} - -static void igb_set_itr(struct igb_q_vector *q_vector) -{ - struct igb_adapter *adapter = q_vector->adapter; - u32 new_itr = q_vector->itr_val; - u8 current_itr = 0; - - /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ - switch (adapter->link_speed) { - case SPEED_10: - case SPEED_100: - current_itr = 0; - new_itr = IGB_4K_ITR; - goto set_itr_now; - default: - break; - } - - igb_update_itr(q_vector, &q_vector->tx); - igb_update_itr(q_vector, &q_vector->rx); - - current_itr = max(q_vector->rx.itr, q_vector->tx.itr); - - /* conservative mode (itr 3) eliminates the lowest_latency setting */ - if (current_itr == lowest_latency && - ((q_vector->rx.ring && adapter->rx_itr_setting == 3) || - (!q_vector->rx.ring && adapter->tx_itr_setting == 3))) - current_itr = low_latency; - - switch (current_itr) { - /* counts and packets in update_itr are dependent on these numbers */ - case lowest_latency: - new_itr = IGB_70K_ITR; /* 70,000 ints/sec */ - break; - case low_latency: - new_itr = IGB_20K_ITR; /* 20,000 ints/sec */ - break; - case bulk_latency: - new_itr = IGB_4K_ITR; /* 4,000 ints/sec */ - break; - default: - break; - } - -set_itr_now: - if (new_itr != q_vector->itr_val) { - /* this attempts to bias the interrupt rate towards Bulk - * by adding intermediate steps when interrupt rate is - * increasing */ - new_itr = new_itr > q_vector->itr_val ? - max((new_itr * q_vector->itr_val) / - (new_itr + (q_vector->itr_val >> 2)), - new_itr) : - new_itr; - /* Don't write the value here; it resets the adapter's - * internal timer, and causes us to delay far longer than - * we should between interrupts. Instead, we write the ITR - * value at the beginning of the next interrupt so the timing - * ends up being correct. - */ - q_vector->itr_val = new_itr; - q_vector->set_itr = 1; - } -} - -void igb_tx_ctxtdesc(struct igb_ring *tx_ring, u32 vlan_macip_lens, - u32 type_tucmd, u32 mss_l4len_idx) -{ - struct e1000_adv_tx_context_desc *context_desc; - u16 i = tx_ring->next_to_use; - - context_desc = IGB_TX_CTXTDESC(tx_ring, i); - - i++; - tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; - - /* set bits to identify this as an advanced context descriptor */ - type_tucmd |= E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT; - - /* For 82575, context index must be unique per ring. */ - if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags)) - mss_l4len_idx |= tx_ring->reg_idx << 4; - - context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens); - context_desc->seqnum_seed = 0; - context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd); - context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); -} - -static int igb_tso(struct igb_ring *tx_ring, - struct igb_tx_buffer *first, - u8 *hdr_len) -{ -#ifdef NETIF_F_TSO - struct sk_buff *skb = first->skb; - u32 vlan_macip_lens, type_tucmd; - u32 mss_l4len_idx, l4len; - - if (skb->ip_summed != CHECKSUM_PARTIAL) - return 0; - - if (!skb_is_gso(skb)) -#endif /* NETIF_F_TSO */ - return 0; -#ifdef NETIF_F_TSO - - if (skb_header_cloned(skb)) { - int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (err) - return err; - } - - /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ - type_tucmd = E1000_ADVTXD_TUCMD_L4T_TCP; - - if (first->protocol == __constant_htons(ETH_P_IP)) { - struct iphdr *iph = ip_hdr(skb); - iph->tot_len = 0; - iph->check = 0; - tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, - iph->daddr, 0, - IPPROTO_TCP, - 0); - type_tucmd |= E1000_ADVTXD_TUCMD_IPV4; - first->tx_flags |= IGB_TX_FLAGS_TSO | - IGB_TX_FLAGS_CSUM | - IGB_TX_FLAGS_IPV4; -#ifdef NETIF_F_TSO6 - } else if (skb_is_gso_v6(skb)) { - ipv6_hdr(skb)->payload_len = 0; - tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, - &ipv6_hdr(skb)->daddr, - 0, IPPROTO_TCP, 0); - first->tx_flags |= IGB_TX_FLAGS_TSO | - IGB_TX_FLAGS_CSUM; -#endif - } - - /* compute header lengths */ - l4len = tcp_hdrlen(skb); - *hdr_len = skb_transport_offset(skb) + l4len; - - /* update gso size and bytecount with header size */ - first->gso_segs = skb_shinfo(skb)->gso_segs; - first->bytecount += (first->gso_segs - 1) * *hdr_len; - - /* MSS L4LEN IDX */ - mss_l4len_idx = l4len << E1000_ADVTXD_L4LEN_SHIFT; - mss_l4len_idx |= skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT; - - /* VLAN MACLEN IPLEN */ - vlan_macip_lens = skb_network_header_len(skb); - vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT; - vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK; - - igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx); - - return 1; -#endif /* NETIF_F_TSO */ -} - -static void igb_tx_csum(struct igb_ring *tx_ring, struct igb_tx_buffer *first) -{ - struct sk_buff *skb = first->skb; - u32 vlan_macip_lens = 0; - u32 mss_l4len_idx = 0; - u32 type_tucmd = 0; - - if (skb->ip_summed != CHECKSUM_PARTIAL) { - if (!(first->tx_flags & IGB_TX_FLAGS_VLAN)) - return; - } else { - u8 nexthdr = 0; - switch (first->protocol) { - case __constant_htons(ETH_P_IP): - vlan_macip_lens |= skb_network_header_len(skb); - type_tucmd |= E1000_ADVTXD_TUCMD_IPV4; - nexthdr = ip_hdr(skb)->protocol; - break; -#ifdef NETIF_F_IPV6_CSUM - case __constant_htons(ETH_P_IPV6): - vlan_macip_lens |= skb_network_header_len(skb); - nexthdr = ipv6_hdr(skb)->nexthdr; - break; -#endif - default: - if (unlikely(net_ratelimit())) { - dev_warn(tx_ring->dev, - "partial checksum but proto=%x!\n", - first->protocol); - } - break; - } - - switch (nexthdr) { - case IPPROTO_TCP: - type_tucmd |= E1000_ADVTXD_TUCMD_L4T_TCP; - mss_l4len_idx = tcp_hdrlen(skb) << - E1000_ADVTXD_L4LEN_SHIFT; - break; -#ifdef HAVE_SCTP - case IPPROTO_SCTP: - type_tucmd |= E1000_ADVTXD_TUCMD_L4T_SCTP; - mss_l4len_idx = sizeof(struct sctphdr) << - E1000_ADVTXD_L4LEN_SHIFT; - break; -#endif - case IPPROTO_UDP: - mss_l4len_idx = sizeof(struct udphdr) << - E1000_ADVTXD_L4LEN_SHIFT; - break; - default: - if (unlikely(net_ratelimit())) { - dev_warn(tx_ring->dev, - "partial checksum but l4 proto=%x!\n", - nexthdr); - } - break; - } - - /* update TX checksum flag */ - first->tx_flags |= IGB_TX_FLAGS_CSUM; - } - - vlan_macip_lens |= skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT; - vlan_macip_lens |= first->tx_flags & IGB_TX_FLAGS_VLAN_MASK; - - igb_tx_ctxtdesc(tx_ring, vlan_macip_lens, type_tucmd, mss_l4len_idx); -} - -#define IGB_SET_FLAG(_input, _flag, _result) \ - ((_flag <= _result) ? \ - ((u32)(_input & _flag) * (_result / _flag)) : \ - ((u32)(_input & _flag) / (_flag / _result))) - -static u32 igb_tx_cmd_type(struct sk_buff *skb, u32 tx_flags) -{ - /* set type for advanced descriptor with frame checksum insertion */ - u32 cmd_type = E1000_ADVTXD_DTYP_DATA | - E1000_ADVTXD_DCMD_DEXT | - E1000_ADVTXD_DCMD_IFCS; - - /* set HW vlan bit if vlan is present */ - cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_VLAN, - (E1000_ADVTXD_DCMD_VLE)); - - /* set segmentation bits for TSO */ - cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSO, - (E1000_ADVTXD_DCMD_TSE)); - - /* set timestamp bit if present */ - cmd_type |= IGB_SET_FLAG(tx_flags, IGB_TX_FLAGS_TSTAMP, - (E1000_ADVTXD_MAC_TSTAMP)); - - return cmd_type; -} - -static void igb_tx_olinfo_status(struct igb_ring *tx_ring, - union e1000_adv_tx_desc *tx_desc, - u32 tx_flags, unsigned int paylen) -{ - u32 olinfo_status = paylen << E1000_ADVTXD_PAYLEN_SHIFT; - - /* 82575 requires a unique index per ring */ - if (test_bit(IGB_RING_FLAG_TX_CTX_IDX, &tx_ring->flags)) - olinfo_status |= tx_ring->reg_idx << 4; - - /* insert L4 checksum */ - olinfo_status |= IGB_SET_FLAG(tx_flags, - IGB_TX_FLAGS_CSUM, - (E1000_TXD_POPTS_TXSM << 8)); - - /* insert IPv4 checksum */ - olinfo_status |= IGB_SET_FLAG(tx_flags, - IGB_TX_FLAGS_IPV4, - (E1000_TXD_POPTS_IXSM << 8)); - - tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); -} - -static void igb_tx_map(struct igb_ring *tx_ring, - struct igb_tx_buffer *first, - const u8 hdr_len) -{ - struct sk_buff *skb = first->skb; - struct igb_tx_buffer *tx_buffer; - union e1000_adv_tx_desc *tx_desc; - struct skb_frag_struct *frag; - dma_addr_t dma; - unsigned int data_len, size; - u32 tx_flags = first->tx_flags; - u32 cmd_type = igb_tx_cmd_type(skb, tx_flags); - u16 i = tx_ring->next_to_use; - - tx_desc = IGB_TX_DESC(tx_ring, i); - - igb_tx_olinfo_status(tx_ring, tx_desc, tx_flags, skb->len - hdr_len); - - size = skb_headlen(skb); - data_len = skb->data_len; - - dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); - - tx_buffer = first; - - for (frag = &skb_shinfo(skb)->frags[0];; frag++) { - if (dma_mapping_error(tx_ring->dev, dma)) - goto dma_error; - - /* record length, and DMA address */ - dma_unmap_len_set(tx_buffer, len, size); - dma_unmap_addr_set(tx_buffer, dma, dma); - - tx_desc->read.buffer_addr = cpu_to_le64(dma); - - while (unlikely(size > IGB_MAX_DATA_PER_TXD)) { - tx_desc->read.cmd_type_len = - cpu_to_le32(cmd_type ^ IGB_MAX_DATA_PER_TXD); - - i++; - tx_desc++; - if (i == tx_ring->count) { - tx_desc = IGB_TX_DESC(tx_ring, 0); - i = 0; - } - tx_desc->read.olinfo_status = 0; - - dma += IGB_MAX_DATA_PER_TXD; - size -= IGB_MAX_DATA_PER_TXD; - - tx_desc->read.buffer_addr = cpu_to_le64(dma); - } - - if (likely(!data_len)) - break; - - tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size); - - i++; - tx_desc++; - if (i == tx_ring->count) { - tx_desc = IGB_TX_DESC(tx_ring, 0); - i = 0; - } - tx_desc->read.olinfo_status = 0; - - size = skb_frag_size(frag); - data_len -= size; - - dma = skb_frag_dma_map(tx_ring->dev, frag, 0, - size, DMA_TO_DEVICE); - - tx_buffer = &tx_ring->tx_buffer_info[i]; - } - - /* write last descriptor with RS and EOP bits */ - cmd_type |= size | IGB_TXD_DCMD; - tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type); - - netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); - /* set the timestamp */ - first->time_stamp = jiffies; - - /* - * Force memory writes to complete before letting h/w know there - * are new descriptors to fetch. (Only applicable for weak-ordered - * memory model archs, such as IA-64). - * - * We also need this memory barrier to make certain all of the - * status bits have been updated before next_to_watch is written. - */ - wmb(); - - /* set next_to_watch value indicating a packet is present */ - first->next_to_watch = tx_desc; - - i++; - if (i == tx_ring->count) - i = 0; - - tx_ring->next_to_use = i; - - writel(i, tx_ring->tail); - - /* we need this if more than one processor can write to our tail - * at a time, it syncronizes IO on IA64/Altix systems */ - mmiowb(); - - return; - -dma_error: - dev_err(tx_ring->dev, "TX DMA map failed\n"); - - /* clear dma mappings for failed tx_buffer_info map */ - for (;;) { - tx_buffer = &tx_ring->tx_buffer_info[i]; - igb_unmap_and_free_tx_resource(tx_ring, tx_buffer); - if (tx_buffer == first) - break; - if (i == 0) - i = tx_ring->count; - i--; - } - - tx_ring->next_to_use = i; -} - -static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size) -{ - struct net_device *netdev = netdev_ring(tx_ring); - - if (netif_is_multiqueue(netdev)) - netif_stop_subqueue(netdev, ring_queue_index(tx_ring)); - else - netif_stop_queue(netdev); - - /* Herbert's original patch had: - * smp_mb__after_netif_stop_queue(); - * but since that doesn't exist yet, just open code it. */ - smp_mb(); - - /* We need to check again in a case another CPU has just - * made room available. */ - if (igb_desc_unused(tx_ring) < size) - return -EBUSY; - - /* A reprieve! */ - if (netif_is_multiqueue(netdev)) - netif_wake_subqueue(netdev, ring_queue_index(tx_ring)); - else - netif_wake_queue(netdev); - - tx_ring->tx_stats.restart_queue++; - - return 0; -} - -static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, const u16 size) -{ - if (igb_desc_unused(tx_ring) >= size) - return 0; - return __igb_maybe_stop_tx(tx_ring, size); -} - -netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb, - struct igb_ring *tx_ring) -{ - struct igb_tx_buffer *first; - int tso; - u32 tx_flags = 0; -#if PAGE_SIZE > IGB_MAX_DATA_PER_TXD - unsigned short f; -#endif - u16 count = TXD_USE_COUNT(skb_headlen(skb)); - __be16 protocol = vlan_get_protocol(skb); - u8 hdr_len = 0; - - /* - * need: 1 descriptor per page * PAGE_SIZE/IGB_MAX_DATA_PER_TXD, - * + 1 desc for skb_headlen/IGB_MAX_DATA_PER_TXD, - * + 2 desc gap to keep tail from touching head, - * + 1 desc for context descriptor, - * otherwise try next time - */ -#if PAGE_SIZE > IGB_MAX_DATA_PER_TXD - for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) - count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); -#else - count += skb_shinfo(skb)->nr_frags; -#endif - if (igb_maybe_stop_tx(tx_ring, count + 3)) { - /* this is a hard error */ - return NETDEV_TX_BUSY; - } - - /* record the location of the first descriptor for this packet */ - first = &tx_ring->tx_buffer_info[tx_ring->next_to_use]; - first->skb = skb; - first->bytecount = skb->len; - first->gso_segs = 1; - - skb_tx_timestamp(skb); - -#ifdef HAVE_PTP_1588_CLOCK - if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) { - struct igb_adapter *adapter = netdev_priv(tx_ring->netdev); - if (!adapter->ptp_tx_skb) { - skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; - tx_flags |= IGB_TX_FLAGS_TSTAMP; - - adapter->ptp_tx_skb = skb_get(skb); - adapter->ptp_tx_start = jiffies; - if (adapter->hw.mac.type == e1000_82576) - schedule_work(&adapter->ptp_tx_work); - } - } -#endif /* HAVE_PTP_1588_CLOCK */ - - if (vlan_tx_tag_present(skb)) { - tx_flags |= IGB_TX_FLAGS_VLAN; - tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT); - } - - /* record initial flags and protocol */ - first->tx_flags = tx_flags; - first->protocol = protocol; - - tso = igb_tso(tx_ring, first, &hdr_len); - if (tso < 0) - goto out_drop; - else if (!tso) - igb_tx_csum(tx_ring, first); - - igb_tx_map(tx_ring, first, hdr_len); - -#ifndef HAVE_TRANS_START_IN_QUEUE - netdev_ring(tx_ring)->trans_start = jiffies; - -#endif - /* Make sure there is space in the ring for the next send. */ - igb_maybe_stop_tx(tx_ring, DESC_NEEDED); - - return NETDEV_TX_OK; - -out_drop: - igb_unmap_and_free_tx_resource(tx_ring, first); - - return NETDEV_TX_OK; -} - -#ifdef HAVE_TX_MQ -static inline struct igb_ring *igb_tx_queue_mapping(struct igb_adapter *adapter, - struct sk_buff *skb) -{ - unsigned int r_idx = skb->queue_mapping; - - if (r_idx >= adapter->num_tx_queues) - r_idx = r_idx % adapter->num_tx_queues; - - return adapter->tx_ring[r_idx]; -} -#else -#define igb_tx_queue_mapping(_adapter, _skb) (_adapter)->tx_ring[0] -#endif - -static netdev_tx_t igb_xmit_frame(struct sk_buff *skb, - struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - - if (test_bit(__IGB_DOWN, &adapter->state)) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - if (skb->len <= 0) { - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - - /* - * The minimum packet size with TCTL.PSP set is 17 so pad the skb - * in order to meet this minimum size requirement. - */ - if (skb->len < 17) { - if (skb_padto(skb, 17)) - return NETDEV_TX_OK; - skb->len = 17; - } - - return igb_xmit_frame_ring(skb, igb_tx_queue_mapping(adapter, skb)); -} - -/** - * igb_tx_timeout - Respond to a Tx Hang - * @netdev: network interface device structure - **/ -static void igb_tx_timeout(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - - /* Do the reset outside of interrupt context */ - adapter->tx_timeout_count++; - - if (hw->mac.type >= e1000_82580) - hw->dev_spec._82575.global_device_reset = true; - - schedule_work(&adapter->reset_task); - E1000_WRITE_REG(hw, E1000_EICS, - (adapter->eims_enable_mask & ~adapter->eims_other)); -} - -static void igb_reset_task(struct work_struct *work) -{ - struct igb_adapter *adapter; - adapter = container_of(work, struct igb_adapter, reset_task); - - igb_reinit_locked(adapter); -} - -/** - * igb_get_stats - Get System Network Statistics - * @netdev: network interface device structure - * - * Returns the address of the device statistics structure. - * The statistics are updated here and also from the timer callback. - **/ -static struct net_device_stats *igb_get_stats(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - - if (!test_bit(__IGB_RESETTING, &adapter->state)) - igb_update_stats(adapter); - -#ifdef HAVE_NETDEV_STATS_IN_NETDEV - /* only return the current stats */ - return &netdev->stats; -#else - /* only return the current stats */ - return &adapter->net_stats; -#endif /* HAVE_NETDEV_STATS_IN_NETDEV */ -} - -/** - * igb_change_mtu - Change the Maximum Transfer Unit - * @netdev: network interface device structure - * @new_mtu: new value for maximum frame size - * - * Returns 0 on success, negative on failure - **/ -static int igb_change_mtu(struct net_device *netdev, int new_mtu) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - struct pci_dev *pdev = adapter->pdev; - int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; - - if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { - dev_err(pci_dev_to_dev(pdev), "Invalid MTU setting\n"); - return -EINVAL; - } - -#define MAX_STD_JUMBO_FRAME_SIZE 9238 - if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - dev_err(pci_dev_to_dev(pdev), "MTU > 9216 not supported.\n"); - return -EINVAL; - } - - /* adjust max frame to be at least the size of a standard frame */ - if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN)) - max_frame = ETH_FRAME_LEN + ETH_FCS_LEN; - - while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) - usleep_range(1000, 2000); - - /* igb_down has a dependency on max_frame_size */ - adapter->max_frame_size = max_frame; - - if (netif_running(netdev)) - igb_down(adapter); - - dev_info(pci_dev_to_dev(pdev), "changing MTU from %d to %d\n", - netdev->mtu, new_mtu); - netdev->mtu = new_mtu; - hw->dev_spec._82575.mtu = new_mtu; - - if (netif_running(netdev)) - igb_up(adapter); - else - igb_reset(adapter); - - clear_bit(__IGB_RESETTING, &adapter->state); - - return 0; -} - -/** - * igb_update_stats - Update the board statistics counters - * @adapter: board private structure - **/ - -void igb_update_stats(struct igb_adapter *adapter) -{ -#ifdef HAVE_NETDEV_STATS_IN_NETDEV - struct net_device_stats *net_stats = &adapter->netdev->stats; -#else - struct net_device_stats *net_stats = &adapter->net_stats; -#endif /* HAVE_NETDEV_STATS_IN_NETDEV */ - struct e1000_hw *hw = &adapter->hw; -#ifdef HAVE_PCI_ERS - struct pci_dev *pdev = adapter->pdev; -#endif - u32 reg, mpc; - u16 phy_tmp; - int i; - u64 bytes, packets; -#ifndef IGB_NO_LRO - u32 flushed = 0, coal = 0; - struct igb_q_vector *q_vector; -#endif - -#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF - - /* - * Prevent stats update while adapter is being reset, or if the pci - * connection is down. - */ - if (adapter->link_speed == 0) - return; -#ifdef HAVE_PCI_ERS - if (pci_channel_offline(pdev)) - return; - -#endif -#ifndef IGB_NO_LRO - for (i = 0; i < adapter->num_q_vectors; i++) { - q_vector = adapter->q_vector[i]; - if (!q_vector) - continue; - flushed += q_vector->lrolist.stats.flushed; - coal += q_vector->lrolist.stats.coal; - } - adapter->lro_stats.flushed = flushed; - adapter->lro_stats.coal = coal; - -#endif - bytes = 0; - packets = 0; - for (i = 0; i < adapter->num_rx_queues; i++) { - u32 rqdpc_tmp = E1000_READ_REG(hw, E1000_RQDPC(i)) & 0x0FFF; - struct igb_ring *ring = adapter->rx_ring[i]; - ring->rx_stats.drops += rqdpc_tmp; - net_stats->rx_fifo_errors += rqdpc_tmp; -#ifdef CONFIG_IGB_VMDQ_NETDEV - if (!ring->vmdq_netdev) { - bytes += ring->rx_stats.bytes; - packets += ring->rx_stats.packets; - } -#else - bytes += ring->rx_stats.bytes; - packets += ring->rx_stats.packets; -#endif - } - - net_stats->rx_bytes = bytes; - net_stats->rx_packets = packets; - - bytes = 0; - packets = 0; - for (i = 0; i < adapter->num_tx_queues; i++) { - struct igb_ring *ring = adapter->tx_ring[i]; -#ifdef CONFIG_IGB_VMDQ_NETDEV - if (!ring->vmdq_netdev) { - bytes += ring->tx_stats.bytes; - packets += ring->tx_stats.packets; - } -#else - bytes += ring->tx_stats.bytes; - packets += ring->tx_stats.packets; -#endif - } - net_stats->tx_bytes = bytes; - net_stats->tx_packets = packets; - - /* read stats registers */ - adapter->stats.crcerrs += E1000_READ_REG(hw, E1000_CRCERRS); - adapter->stats.gprc += E1000_READ_REG(hw, E1000_GPRC); - adapter->stats.gorc += E1000_READ_REG(hw, E1000_GORCL); - E1000_READ_REG(hw, E1000_GORCH); /* clear GORCL */ - adapter->stats.bprc += E1000_READ_REG(hw, E1000_BPRC); - adapter->stats.mprc += E1000_READ_REG(hw, E1000_MPRC); - adapter->stats.roc += E1000_READ_REG(hw, E1000_ROC); - - adapter->stats.prc64 += E1000_READ_REG(hw, E1000_PRC64); - adapter->stats.prc127 += E1000_READ_REG(hw, E1000_PRC127); - adapter->stats.prc255 += E1000_READ_REG(hw, E1000_PRC255); - adapter->stats.prc511 += E1000_READ_REG(hw, E1000_PRC511); - adapter->stats.prc1023 += E1000_READ_REG(hw, E1000_PRC1023); - adapter->stats.prc1522 += E1000_READ_REG(hw, E1000_PRC1522); - adapter->stats.symerrs += E1000_READ_REG(hw, E1000_SYMERRS); - adapter->stats.sec += E1000_READ_REG(hw, E1000_SEC); - - mpc = E1000_READ_REG(hw, E1000_MPC); - adapter->stats.mpc += mpc; - net_stats->rx_fifo_errors += mpc; - adapter->stats.scc += E1000_READ_REG(hw, E1000_SCC); - adapter->stats.ecol += E1000_READ_REG(hw, E1000_ECOL); - adapter->stats.mcc += E1000_READ_REG(hw, E1000_MCC); - adapter->stats.latecol += E1000_READ_REG(hw, E1000_LATECOL); - adapter->stats.dc += E1000_READ_REG(hw, E1000_DC); - adapter->stats.rlec += E1000_READ_REG(hw, E1000_RLEC); - adapter->stats.xonrxc += E1000_READ_REG(hw, E1000_XONRXC); - adapter->stats.xontxc += E1000_READ_REG(hw, E1000_XONTXC); - adapter->stats.xoffrxc += E1000_READ_REG(hw, E1000_XOFFRXC); - adapter->stats.xofftxc += E1000_READ_REG(hw, E1000_XOFFTXC); - adapter->stats.fcruc += E1000_READ_REG(hw, E1000_FCRUC); - adapter->stats.gptc += E1000_READ_REG(hw, E1000_GPTC); - adapter->stats.gotc += E1000_READ_REG(hw, E1000_GOTCL); - E1000_READ_REG(hw, E1000_GOTCH); /* clear GOTCL */ - adapter->stats.rnbc += E1000_READ_REG(hw, E1000_RNBC); - adapter->stats.ruc += E1000_READ_REG(hw, E1000_RUC); - adapter->stats.rfc += E1000_READ_REG(hw, E1000_RFC); - adapter->stats.rjc += E1000_READ_REG(hw, E1000_RJC); - adapter->stats.tor += E1000_READ_REG(hw, E1000_TORH); - adapter->stats.tot += E1000_READ_REG(hw, E1000_TOTH); - adapter->stats.tpr += E1000_READ_REG(hw, E1000_TPR); - - adapter->stats.ptc64 += E1000_READ_REG(hw, E1000_PTC64); - adapter->stats.ptc127 += E1000_READ_REG(hw, E1000_PTC127); - adapter->stats.ptc255 += E1000_READ_REG(hw, E1000_PTC255); - adapter->stats.ptc511 += E1000_READ_REG(hw, E1000_PTC511); - adapter->stats.ptc1023 += E1000_READ_REG(hw, E1000_PTC1023); - adapter->stats.ptc1522 += E1000_READ_REG(hw, E1000_PTC1522); - - adapter->stats.mptc += E1000_READ_REG(hw, E1000_MPTC); - adapter->stats.bptc += E1000_READ_REG(hw, E1000_BPTC); - - adapter->stats.tpt += E1000_READ_REG(hw, E1000_TPT); - adapter->stats.colc += E1000_READ_REG(hw, E1000_COLC); - - adapter->stats.algnerrc += E1000_READ_REG(hw, E1000_ALGNERRC); - /* read internal phy sepecific stats */ - reg = E1000_READ_REG(hw, E1000_CTRL_EXT); - if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) { - adapter->stats.rxerrc += E1000_READ_REG(hw, E1000_RXERRC); - - /* this stat has invalid values on i210/i211 */ - if ((hw->mac.type != e1000_i210) && - (hw->mac.type != e1000_i211)) - adapter->stats.tncrs += E1000_READ_REG(hw, E1000_TNCRS); - } - adapter->stats.tsctc += E1000_READ_REG(hw, E1000_TSCTC); - adapter->stats.tsctfc += E1000_READ_REG(hw, E1000_TSCTFC); - - adapter->stats.iac += E1000_READ_REG(hw, E1000_IAC); - adapter->stats.icrxoc += E1000_READ_REG(hw, E1000_ICRXOC); - adapter->stats.icrxptc += E1000_READ_REG(hw, E1000_ICRXPTC); - adapter->stats.icrxatc += E1000_READ_REG(hw, E1000_ICRXATC); - adapter->stats.ictxptc += E1000_READ_REG(hw, E1000_ICTXPTC); - adapter->stats.ictxatc += E1000_READ_REG(hw, E1000_ICTXATC); - adapter->stats.ictxqec += E1000_READ_REG(hw, E1000_ICTXQEC); - adapter->stats.ictxqmtc += E1000_READ_REG(hw, E1000_ICTXQMTC); - adapter->stats.icrxdmtc += E1000_READ_REG(hw, E1000_ICRXDMTC); - - /* Fill out the OS statistics structure */ - net_stats->multicast = adapter->stats.mprc; - net_stats->collisions = adapter->stats.colc; - - /* Rx Errors */ - - /* RLEC on some newer hardware can be incorrect so build - * our own version based on RUC and ROC */ - net_stats->rx_errors = adapter->stats.rxerrc + - adapter->stats.crcerrs + adapter->stats.algnerrc + - adapter->stats.ruc + adapter->stats.roc + - adapter->stats.cexterr; - net_stats->rx_length_errors = adapter->stats.ruc + - adapter->stats.roc; - net_stats->rx_crc_errors = adapter->stats.crcerrs; - net_stats->rx_frame_errors = adapter->stats.algnerrc; - net_stats->rx_missed_errors = adapter->stats.mpc; - - /* Tx Errors */ - net_stats->tx_errors = adapter->stats.ecol + - adapter->stats.latecol; - net_stats->tx_aborted_errors = adapter->stats.ecol; - net_stats->tx_window_errors = adapter->stats.latecol; - net_stats->tx_carrier_errors = adapter->stats.tncrs; - - /* Tx Dropped needs to be maintained elsewhere */ - - /* Phy Stats */ - if (hw->phy.media_type == e1000_media_type_copper) { - if ((adapter->link_speed == SPEED_1000) && - (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) { - phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; - adapter->phy_stats.idle_errors += phy_tmp; - } - } - - /* Management Stats */ - adapter->stats.mgptc += E1000_READ_REG(hw, E1000_MGTPTC); - adapter->stats.mgprc += E1000_READ_REG(hw, E1000_MGTPRC); - if (hw->mac.type > e1000_82580) { - adapter->stats.o2bgptc += E1000_READ_REG(hw, E1000_O2BGPTC); - adapter->stats.o2bspc += E1000_READ_REG(hw, E1000_O2BSPC); - adapter->stats.b2ospc += E1000_READ_REG(hw, E1000_B2OSPC); - adapter->stats.b2ogprc += E1000_READ_REG(hw, E1000_B2OGPRC); - } -} - -static irqreturn_t igb_msix_other(int irq, void *data) -{ - struct igb_adapter *adapter = data; - struct e1000_hw *hw = &adapter->hw; - u32 icr = E1000_READ_REG(hw, E1000_ICR); - /* reading ICR causes bit 31 of EICR to be cleared */ - - if (icr & E1000_ICR_DRSTA) - schedule_work(&adapter->reset_task); - - if (icr & E1000_ICR_DOUTSYNC) { - /* HW is reporting DMA is out of sync */ - adapter->stats.doosync++; - /* The DMA Out of Sync is also indication of a spoof event - * in IOV mode. Check the Wrong VM Behavior register to - * see if it is really a spoof event. */ - igb_check_wvbr(adapter); - } - - /* Check for a mailbox event */ - if (icr & E1000_ICR_VMMB) - igb_msg_task(adapter); - - if (icr & E1000_ICR_LSC) { - hw->mac.get_link_status = 1; - /* guard against interrupt when we're going down */ - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - -#ifdef HAVE_PTP_1588_CLOCK - if (icr & E1000_ICR_TS) { - u32 tsicr = E1000_READ_REG(hw, E1000_TSICR); - - if (tsicr & E1000_TSICR_TXTS) { - /* acknowledge the interrupt */ - E1000_WRITE_REG(hw, E1000_TSICR, E1000_TSICR_TXTS); - /* retrieve hardware timestamp */ - schedule_work(&adapter->ptp_tx_work); - } - } -#endif /* HAVE_PTP_1588_CLOCK */ - - /* Check for MDD event */ - if (icr & E1000_ICR_MDDET) - igb_process_mdd_event(adapter); - - E1000_WRITE_REG(hw, E1000_EIMS, adapter->eims_other); - - return IRQ_HANDLED; -} - -static void igb_write_itr(struct igb_q_vector *q_vector) -{ - struct igb_adapter *adapter = q_vector->adapter; - u32 itr_val = q_vector->itr_val & 0x7FFC; - - if (!q_vector->set_itr) - return; - - if (!itr_val) - itr_val = 0x4; - - if (adapter->hw.mac.type == e1000_82575) - itr_val |= itr_val << 16; - else - itr_val |= E1000_EITR_CNT_IGNR; - - writel(itr_val, q_vector->itr_register); - q_vector->set_itr = 0; -} - -static irqreturn_t igb_msix_ring(int irq, void *data) -{ - struct igb_q_vector *q_vector = data; - - /* Write the ITR value calculated from the previous interrupt. */ - igb_write_itr(q_vector); - - napi_schedule(&q_vector->napi); - - return IRQ_HANDLED; -} - -#ifdef IGB_DCA -static void igb_update_tx_dca(struct igb_adapter *adapter, - struct igb_ring *tx_ring, - int cpu) -{ - struct e1000_hw *hw = &adapter->hw; - u32 txctrl = dca3_get_tag(tx_ring->dev, cpu); - - if (hw->mac.type != e1000_82575) - txctrl <<= E1000_DCA_TXCTRL_CPUID_SHIFT_82576; - - /* - * We can enable relaxed ordering for reads, but not writes when - * DCA is enabled. This is due to a known issue in some chipsets - * which will cause the DCA tag to be cleared. - */ - txctrl |= E1000_DCA_TXCTRL_DESC_RRO_EN | - E1000_DCA_TXCTRL_DATA_RRO_EN | - E1000_DCA_TXCTRL_DESC_DCA_EN; - - E1000_WRITE_REG(hw, E1000_DCA_TXCTRL(tx_ring->reg_idx), txctrl); -} - -static void igb_update_rx_dca(struct igb_adapter *adapter, - struct igb_ring *rx_ring, - int cpu) -{ - struct e1000_hw *hw = &adapter->hw; - u32 rxctrl = dca3_get_tag(&adapter->pdev->dev, cpu); - - if (hw->mac.type != e1000_82575) - rxctrl <<= E1000_DCA_RXCTRL_CPUID_SHIFT_82576; - - /* - * We can enable relaxed ordering for reads, but not writes when - * DCA is enabled. This is due to a known issue in some chipsets - * which will cause the DCA tag to be cleared. - */ - rxctrl |= E1000_DCA_RXCTRL_DESC_RRO_EN | - E1000_DCA_RXCTRL_DESC_DCA_EN; - - E1000_WRITE_REG(hw, E1000_DCA_RXCTRL(rx_ring->reg_idx), rxctrl); -} - -static void igb_update_dca(struct igb_q_vector *q_vector) -{ - struct igb_adapter *adapter = q_vector->adapter; - int cpu = get_cpu(); - - if (q_vector->cpu == cpu) - goto out_no_update; - - if (q_vector->tx.ring) - igb_update_tx_dca(adapter, q_vector->tx.ring, cpu); - - if (q_vector->rx.ring) - igb_update_rx_dca(adapter, q_vector->rx.ring, cpu); - - q_vector->cpu = cpu; -out_no_update: - put_cpu(); -} - -static void igb_setup_dca(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - - if (!(adapter->flags & IGB_FLAG_DCA_ENABLED)) - return; - - /* Always use CB2 mode, difference is masked in the CB driver. */ - E1000_WRITE_REG(hw, E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2); - - for (i = 0; i < adapter->num_q_vectors; i++) { - adapter->q_vector[i]->cpu = -1; - igb_update_dca(adapter->q_vector[i]); - } -} - -static int __igb_notify_dca(struct device *dev, void *data) -{ - struct net_device *netdev = dev_get_drvdata(dev); - struct igb_adapter *adapter = netdev_priv(netdev); - struct pci_dev *pdev = adapter->pdev; - struct e1000_hw *hw = &adapter->hw; - unsigned long event = *(unsigned long *)data; - - switch (event) { - case DCA_PROVIDER_ADD: - /* if already enabled, don't do it again */ - if (adapter->flags & IGB_FLAG_DCA_ENABLED) - break; - if (dca_add_requester(dev) == E1000_SUCCESS) { - adapter->flags |= IGB_FLAG_DCA_ENABLED; - dev_info(pci_dev_to_dev(pdev), "DCA enabled\n"); - igb_setup_dca(adapter); - break; - } - /* Fall Through since DCA is disabled. */ - case DCA_PROVIDER_REMOVE: - if (adapter->flags & IGB_FLAG_DCA_ENABLED) { - /* without this a class_device is left - * hanging around in the sysfs model */ - dca_remove_requester(dev); - dev_info(pci_dev_to_dev(pdev), "DCA disabled\n"); - adapter->flags &= ~IGB_FLAG_DCA_ENABLED; - E1000_WRITE_REG(hw, E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_DISABLE); - } - break; - } - - return E1000_SUCCESS; -} - -static int igb_notify_dca(struct notifier_block *nb, unsigned long event, - void *p) -{ - int ret_val; - - ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event, - __igb_notify_dca); - - return ret_val ? NOTIFY_BAD : NOTIFY_DONE; -} -#endif /* IGB_DCA */ - -static int igb_vf_configure(struct igb_adapter *adapter, int vf) -{ - unsigned char mac_addr[ETH_ALEN]; - - random_ether_addr(mac_addr); - igb_set_vf_mac(adapter, vf, mac_addr); - -#ifdef IFLA_VF_MAX -#ifdef HAVE_VF_SPOOFCHK_CONFIGURE - /* By default spoof check is enabled for all VFs */ - adapter->vf_data[vf].spoofchk_enabled = true; -#endif -#endif - - return true; -} - -static void igb_ping_all_vfs(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 ping; - int i; - - for (i = 0 ; i < adapter->vfs_allocated_count; i++) { - ping = E1000_PF_CONTROL_MSG; - if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS) - ping |= E1000_VT_MSGTYPE_CTS; - e1000_write_mbx(hw, &ping, 1, i); - } -} - -/** - * igb_mta_set_ - Set multicast filter table address - * @adapter: pointer to the adapter structure - * @hash_value: determines the MTA register and bit to set - * - * The multicast table address is a register array of 32-bit registers. - * The hash_value is used to determine what register the bit is in, the - * current value is read, the new bit is OR'd in and the new value is - * written back into the register. - **/ -void igb_mta_set(struct igb_adapter *adapter, u32 hash_value) -{ - struct e1000_hw *hw = &adapter->hw; - u32 hash_bit, hash_reg, mta; - - /* - * The MTA is a register array of 32-bit registers. It is - * treated like an array of (32*mta_reg_count) bits. We want to - * set bit BitArray[hash_value]. So we figure out what register - * the bit is in, read it, OR in the new bit, then write - * back the new value. The (hw->mac.mta_reg_count - 1) serves as a - * mask to bits 31:5 of the hash value which gives us the - * register we're modifying. The hash bit within that register - * is determined by the lower 5 bits of the hash value. - */ - hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); - hash_bit = hash_value & 0x1F; - - mta = E1000_READ_REG_ARRAY(hw, E1000_MTA, hash_reg); - - mta |= (1 << hash_bit); - - E1000_WRITE_REG_ARRAY(hw, E1000_MTA, hash_reg, mta); - E1000_WRITE_FLUSH(hw); -} - -static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf) -{ - - struct e1000_hw *hw = &adapter->hw; - u32 vmolr = E1000_READ_REG(hw, E1000_VMOLR(vf)); - struct vf_data_storage *vf_data = &adapter->vf_data[vf]; - - vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC | - IGB_VF_FLAG_MULTI_PROMISC); - vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME); - -#ifdef IGB_ENABLE_VF_PROMISC - if (*msgbuf & E1000_VF_SET_PROMISC_UNICAST) { - vmolr |= E1000_VMOLR_ROPE; - vf_data->flags |= IGB_VF_FLAG_UNI_PROMISC; - *msgbuf &= ~E1000_VF_SET_PROMISC_UNICAST; - } -#endif - if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) { - vmolr |= E1000_VMOLR_MPME; - vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC; - *msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST; - } else { - /* - * if we have hashes and we are clearing a multicast promisc - * flag we need to write the hashes to the MTA as this step - * was previously skipped - */ - if (vf_data->num_vf_mc_hashes > 30) { - vmolr |= E1000_VMOLR_MPME; - } else if (vf_data->num_vf_mc_hashes) { - int j; - vmolr |= E1000_VMOLR_ROMPE; - for (j = 0; j < vf_data->num_vf_mc_hashes; j++) - igb_mta_set(adapter, vf_data->vf_mc_hashes[j]); - } - } - - E1000_WRITE_REG(hw, E1000_VMOLR(vf), vmolr); - - /* there are flags left unprocessed, likely not supported */ - if (*msgbuf & E1000_VT_MSGINFO_MASK) - return -EINVAL; - - return 0; - -} - -static int igb_set_vf_multicasts(struct igb_adapter *adapter, - u32 *msgbuf, u32 vf) -{ - int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT; - u16 *hash_list = (u16 *)&msgbuf[1]; - struct vf_data_storage *vf_data = &adapter->vf_data[vf]; - int i; - - /* salt away the number of multicast addresses assigned - * to this VF for later use to restore when the PF multi cast - * list changes - */ - vf_data->num_vf_mc_hashes = n; - - /* only up to 30 hash values supported */ - if (n > 30) - n = 30; - - /* store the hashes for later use */ - for (i = 0; i < n; i++) - vf_data->vf_mc_hashes[i] = hash_list[i]; - - /* Flush and reset the mta with the new values */ - igb_set_rx_mode(adapter->netdev); - - return 0; -} - -static void igb_restore_vf_multicasts(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - struct vf_data_storage *vf_data; - int i, j; - - for (i = 0; i < adapter->vfs_allocated_count; i++) { - u32 vmolr = E1000_READ_REG(hw, E1000_VMOLR(i)); - vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME); - - vf_data = &adapter->vf_data[i]; - - if ((vf_data->num_vf_mc_hashes > 30) || - (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) { - vmolr |= E1000_VMOLR_MPME; - } else if (vf_data->num_vf_mc_hashes) { - vmolr |= E1000_VMOLR_ROMPE; - for (j = 0; j < vf_data->num_vf_mc_hashes; j++) - igb_mta_set(adapter, vf_data->vf_mc_hashes[j]); - } - E1000_WRITE_REG(hw, E1000_VMOLR(i), vmolr); - } -} - -static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - u32 pool_mask, reg, vid; - u16 vlan_default; - int i; - - pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf); - - /* Find the vlan filter for this id */ - for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { - reg = E1000_READ_REG(hw, E1000_VLVF(i)); - - /* remove the vf from the pool */ - reg &= ~pool_mask; - - /* if pool is empty then remove entry from vfta */ - if (!(reg & E1000_VLVF_POOLSEL_MASK) && - (reg & E1000_VLVF_VLANID_ENABLE)) { - reg = 0; - vid = reg & E1000_VLVF_VLANID_MASK; - igb_vfta_set(adapter, vid, FALSE); - } - - E1000_WRITE_REG(hw, E1000_VLVF(i), reg); - } - - adapter->vf_data[vf].vlans_enabled = 0; - - vlan_default = adapter->vf_data[vf].default_vf_vlan_id; - if (vlan_default) - igb_vlvf_set(adapter, vlan_default, true, vf); -} - -s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - u32 reg, i; - - /* The vlvf table only exists on 82576 hardware and newer */ - if (hw->mac.type < e1000_82576) - return -1; - - /* we only need to do this if VMDq is enabled */ - if (!adapter->vmdq_pools) - return -1; - - /* Find the vlan filter for this id */ - for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { - reg = E1000_READ_REG(hw, E1000_VLVF(i)); - if ((reg & E1000_VLVF_VLANID_ENABLE) && - vid == (reg & E1000_VLVF_VLANID_MASK)) - break; - } - - if (add) { - if (i == E1000_VLVF_ARRAY_SIZE) { - /* Did not find a matching VLAN ID entry that was - * enabled. Search for a free filter entry, i.e. - * one without the enable bit set - */ - for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { - reg = E1000_READ_REG(hw, E1000_VLVF(i)); - if (!(reg & E1000_VLVF_VLANID_ENABLE)) - break; - } - } - if (i < E1000_VLVF_ARRAY_SIZE) { - /* Found an enabled/available entry */ - reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf); - - /* if !enabled we need to set this up in vfta */ - if (!(reg & E1000_VLVF_VLANID_ENABLE)) { - /* add VID to filter table */ - igb_vfta_set(adapter, vid, TRUE); - reg |= E1000_VLVF_VLANID_ENABLE; - } - reg &= ~E1000_VLVF_VLANID_MASK; - reg |= vid; - E1000_WRITE_REG(hw, E1000_VLVF(i), reg); - - /* do not modify RLPML for PF devices */ - if (vf >= adapter->vfs_allocated_count) - return E1000_SUCCESS; - - if (!adapter->vf_data[vf].vlans_enabled) { - u32 size; - reg = E1000_READ_REG(hw, E1000_VMOLR(vf)); - size = reg & E1000_VMOLR_RLPML_MASK; - size += 4; - reg &= ~E1000_VMOLR_RLPML_MASK; - reg |= size; - E1000_WRITE_REG(hw, E1000_VMOLR(vf), reg); - } - - adapter->vf_data[vf].vlans_enabled++; - } - } else { - if (i < E1000_VLVF_ARRAY_SIZE) { - /* remove vf from the pool */ - reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf)); - /* if pool is empty then remove entry from vfta */ - if (!(reg & E1000_VLVF_POOLSEL_MASK)) { - reg = 0; - igb_vfta_set(adapter, vid, FALSE); - } - E1000_WRITE_REG(hw, E1000_VLVF(i), reg); - - /* do not modify RLPML for PF devices */ - if (vf >= adapter->vfs_allocated_count) - return E1000_SUCCESS; - - adapter->vf_data[vf].vlans_enabled--; - if (!adapter->vf_data[vf].vlans_enabled) { - u32 size; - reg = E1000_READ_REG(hw, E1000_VMOLR(vf)); - size = reg & E1000_VMOLR_RLPML_MASK; - size -= 4; - reg &= ~E1000_VMOLR_RLPML_MASK; - reg |= size; - E1000_WRITE_REG(hw, E1000_VMOLR(vf), reg); - } - } - } - return E1000_SUCCESS; -} - -#ifdef IFLA_VF_MAX -static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - - if (vid) - E1000_WRITE_REG(hw, E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT)); - else - E1000_WRITE_REG(hw, E1000_VMVIR(vf), 0); -} - -static int igb_ndo_set_vf_vlan(struct net_device *netdev, -#ifdef HAVE_VF_VLAN_PROTO - int vf, u16 vlan, u8 qos, __be16 vlan_proto) -#else - int vf, u16 vlan, u8 qos) -#endif -{ - int err = 0; - struct igb_adapter *adapter = netdev_priv(netdev); - - /* VLAN IDs accepted range 0-4094 */ - if ((vf >= adapter->vfs_allocated_count) || (vlan > VLAN_VID_MASK-1) || (qos > 7)) - return -EINVAL; - -#ifdef HAVE_VF_VLAN_PROTO - if (vlan_proto != htons(ETH_P_8021Q)) - return -EPROTONOSUPPORT; -#endif - - if (vlan || qos) { - err = igb_vlvf_set(adapter, vlan, !!vlan, vf); - if (err) - goto out; - igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf); - igb_set_vmolr(adapter, vf, !vlan); - adapter->vf_data[vf].pf_vlan = vlan; - adapter->vf_data[vf].pf_qos = qos; - igb_set_vf_vlan_strip(adapter, vf, true); - dev_info(&adapter->pdev->dev, - "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf); - if (test_bit(__IGB_DOWN, &adapter->state)) { - dev_warn(&adapter->pdev->dev, - "The VF VLAN has been set," - " but the PF device is not up.\n"); - dev_warn(&adapter->pdev->dev, - "Bring the PF device up before" - " attempting to use the VF device.\n"); - } - } else { - if (adapter->vf_data[vf].pf_vlan) - dev_info(&adapter->pdev->dev, - "Clearing VLAN on VF %d\n", vf); - igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan, - false, vf); - igb_set_vmvir(adapter, vlan, vf); - igb_set_vmolr(adapter, vf, true); - igb_set_vf_vlan_strip(adapter, vf, false); - adapter->vf_data[vf].pf_vlan = 0; - adapter->vf_data[vf].pf_qos = 0; - } -out: - return err; -} - -#ifdef HAVE_VF_SPOOFCHK_CONFIGURE -static int igb_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, - bool setting) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 dtxswc, reg_offset; - - if (!adapter->vfs_allocated_count) - return -EOPNOTSUPP; - - if (vf >= adapter->vfs_allocated_count) - return -EINVAL; - - reg_offset = (hw->mac.type == e1000_82576) ? E1000_DTXSWC : E1000_TXSWC; - dtxswc = E1000_READ_REG(hw, reg_offset); - if (setting) - dtxswc |= ((1 << vf) | - (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT))); - else - dtxswc &= ~((1 << vf) | - (1 << (vf + E1000_DTXSWC_VLAN_SPOOF_SHIFT))); - E1000_WRITE_REG(hw, reg_offset, dtxswc); - - adapter->vf_data[vf].spoofchk_enabled = setting; - return E1000_SUCCESS; -} -#endif /* HAVE_VF_SPOOFCHK_CONFIGURE */ -#endif /* IFLA_VF_MAX */ - -static int igb_find_vlvf_entry(struct igb_adapter *adapter, int vid) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - u32 reg; - - /* Find the vlan filter for this id */ - for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) { - reg = E1000_READ_REG(hw, E1000_VLVF(i)); - if ((reg & E1000_VLVF_VLANID_ENABLE) && - vid == (reg & E1000_VLVF_VLANID_MASK)) - break; - } - - if (i >= E1000_VLVF_ARRAY_SIZE) - i = -1; - - return i; -} - -static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT; - int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK); - int err = 0; - - if (vid) - igb_set_vf_vlan_strip(adapter, vf, true); - else - igb_set_vf_vlan_strip(adapter, vf, false); - - /* If in promiscuous mode we need to make sure the PF also has - * the VLAN filter set. - */ - if (add && (adapter->netdev->flags & IFF_PROMISC)) - err = igb_vlvf_set(adapter, vid, add, - adapter->vfs_allocated_count); - if (err) - goto out; - - err = igb_vlvf_set(adapter, vid, add, vf); - - if (err) - goto out; - - /* Go through all the checks to see if the VLAN filter should - * be wiped completely. - */ - if (!add && (adapter->netdev->flags & IFF_PROMISC)) { - u32 vlvf, bits; - - int regndx = igb_find_vlvf_entry(adapter, vid); - if (regndx < 0) - goto out; - /* See if any other pools are set for this VLAN filter - * entry other than the PF. - */ - vlvf = bits = E1000_READ_REG(hw, E1000_VLVF(regndx)); - bits &= 1 << (E1000_VLVF_POOLSEL_SHIFT + - adapter->vfs_allocated_count); - /* If the filter was removed then ensure PF pool bit - * is cleared if the PF only added itself to the pool - * because the PF is in promiscuous mode. - */ - if ((vlvf & VLAN_VID_MASK) == vid && -#ifndef HAVE_VLAN_RX_REGISTER - !test_bit(vid, adapter->active_vlans) && -#endif - !bits) - igb_vlvf_set(adapter, vid, add, - adapter->vfs_allocated_count); - } - -out: - return err; -} - -static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - - /* clear flags except flag that the PF has set the MAC */ - adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC; - adapter->vf_data[vf].last_nack = jiffies; - - /* reset offloads to defaults */ - igb_set_vmolr(adapter, vf, true); - - /* reset vlans for device */ - igb_clear_vf_vfta(adapter, vf); -#ifdef IFLA_VF_MAX - if (adapter->vf_data[vf].pf_vlan) - igb_ndo_set_vf_vlan(adapter->netdev, vf, - adapter->vf_data[vf].pf_vlan, -#ifdef HAVE_VF_VLAN_PROTO - adapter->vf_data[vf].pf_qos, - htons(ETH_P_8021Q)); -#else - adapter->vf_data[vf].pf_qos); -#endif - else - igb_clear_vf_vfta(adapter, vf); -#endif - - /* reset multicast table array for vf */ - adapter->vf_data[vf].num_vf_mc_hashes = 0; - - /* Flush and reset the mta with the new values */ - igb_set_rx_mode(adapter->netdev); - - /* - * Reset the VFs TDWBAL and TDWBAH registers which are not - * cleared by a VFLR - */ - E1000_WRITE_REG(hw, E1000_TDWBAH(vf), 0); - E1000_WRITE_REG(hw, E1000_TDWBAL(vf), 0); - if (hw->mac.type == e1000_82576) { - E1000_WRITE_REG(hw, E1000_TDWBAH(IGB_MAX_VF_FUNCTIONS + vf), 0); - E1000_WRITE_REG(hw, E1000_TDWBAL(IGB_MAX_VF_FUNCTIONS + vf), 0); - } -} - -static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf) -{ - unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses; - - /* generate a new mac address as we were hotplug removed/added */ - if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC)) - random_ether_addr(vf_mac); - - /* process remaining reset events */ - igb_vf_reset(adapter, vf); -} - -static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses; - u32 reg, msgbuf[3]; - u8 *addr = (u8 *)(&msgbuf[1]); - - /* process all the same items cleared in a function level reset */ - igb_vf_reset(adapter, vf); - - /* set vf mac address */ - igb_del_mac_filter(adapter, vf_mac, vf); - igb_add_mac_filter(adapter, vf_mac, vf); - - /* enable transmit and receive for vf */ - reg = E1000_READ_REG(hw, E1000_VFTE); - E1000_WRITE_REG(hw, E1000_VFTE, reg | (1 << vf)); - reg = E1000_READ_REG(hw, E1000_VFRE); - E1000_WRITE_REG(hw, E1000_VFRE, reg | (1 << vf)); - - adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS; - - /* reply to reset with ack and vf mac address */ - msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK; - memcpy(addr, vf_mac, 6); - e1000_write_mbx(hw, msgbuf, 3, vf); -} - -static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf) -{ - /* - * The VF MAC Address is stored in a packed array of bytes - * starting at the second 32 bit word of the msg array - */ - unsigned char *addr = (unsigned char *)&msg[1]; - int err = -1; - - if (is_valid_ether_addr(addr)) - err = igb_set_vf_mac(adapter, vf, addr); - - return err; -} - -static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf) -{ - struct e1000_hw *hw = &adapter->hw; - struct vf_data_storage *vf_data = &adapter->vf_data[vf]; - u32 msg = E1000_VT_MSGTYPE_NACK; - - /* if device isn't clear to send it shouldn't be reading either */ - if (!(vf_data->flags & IGB_VF_FLAG_CTS) && - time_after(jiffies, vf_data->last_nack + (2 * HZ))) { - e1000_write_mbx(hw, &msg, 1, vf); - vf_data->last_nack = jiffies; - } -} - -static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf) -{ - struct pci_dev *pdev = adapter->pdev; - u32 msgbuf[E1000_VFMAILBOX_SIZE]; - struct e1000_hw *hw = &adapter->hw; - struct vf_data_storage *vf_data = &adapter->vf_data[vf]; - s32 retval; - - retval = e1000_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf); - - if (retval) { - dev_err(pci_dev_to_dev(pdev), "Error receiving message from VF\n"); - return; - } - - /* this is a message we already processed, do nothing */ - if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK)) - return; - - /* - * until the vf completes a reset it should not be - * allowed to start any configuration. - */ - - if (msgbuf[0] == E1000_VF_RESET) { - igb_vf_reset_msg(adapter, vf); - return; - } - - if (!(vf_data->flags & IGB_VF_FLAG_CTS)) { - msgbuf[0] = E1000_VT_MSGTYPE_NACK; - if (time_after(jiffies, vf_data->last_nack + (2 * HZ))) { - e1000_write_mbx(hw, msgbuf, 1, vf); - vf_data->last_nack = jiffies; - } - return; - } - - switch ((msgbuf[0] & 0xFFFF)) { - case E1000_VF_SET_MAC_ADDR: - retval = -EINVAL; -#ifndef IGB_DISABLE_VF_MAC_SET - if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC)) - retval = igb_set_vf_mac_addr(adapter, msgbuf, vf); - else - DPRINTK(DRV, INFO, - "VF %d attempted to override administratively " - "set MAC address\nReload the VF driver to " - "resume operations\n", vf); -#endif - break; - case E1000_VF_SET_PROMISC: - retval = igb_set_vf_promisc(adapter, msgbuf, vf); - break; - case E1000_VF_SET_MULTICAST: - retval = igb_set_vf_multicasts(adapter, msgbuf, vf); - break; - case E1000_VF_SET_LPE: - retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf); - break; - case E1000_VF_SET_VLAN: - retval = -1; -#ifdef IFLA_VF_MAX - if (vf_data->pf_vlan) - DPRINTK(DRV, INFO, - "VF %d attempted to override administratively " - "set VLAN tag\nReload the VF driver to " - "resume operations\n", vf); - else -#endif - retval = igb_set_vf_vlan(adapter, msgbuf, vf); - break; - default: - dev_err(pci_dev_to_dev(pdev), "Unhandled Msg %08x\n", msgbuf[0]); - retval = -E1000_ERR_MBX; - break; - } - - /* notify the VF of the results of what it sent us */ - if (retval) - msgbuf[0] |= E1000_VT_MSGTYPE_NACK; - else - msgbuf[0] |= E1000_VT_MSGTYPE_ACK; - - msgbuf[0] |= E1000_VT_MSGTYPE_CTS; - - e1000_write_mbx(hw, msgbuf, 1, vf); -} - -static void igb_msg_task(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - u32 vf; - - for (vf = 0; vf < adapter->vfs_allocated_count; vf++) { - /* process any reset requests */ - if (!e1000_check_for_rst(hw, vf)) - igb_vf_reset_event(adapter, vf); - - /* process any messages pending */ - if (!e1000_check_for_msg(hw, vf)) - igb_rcv_msg_from_vf(adapter, vf); - - /* process any acks */ - if (!e1000_check_for_ack(hw, vf)) - igb_rcv_ack_from_vf(adapter, vf); - } -} - -/** - * igb_set_uta - Set unicast filter table address - * @adapter: board private structure - * - * The unicast table address is a register array of 32-bit registers. - * The table is meant to be used in a way similar to how the MTA is used - * however due to certain limitations in the hardware it is necessary to - * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous - * enable bit to allow vlan tag stripping when promiscuous mode is enabled - **/ -static void igb_set_uta(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - - /* The UTA table only exists on 82576 hardware and newer */ - if (hw->mac.type < e1000_82576) - return; - - /* we only need to do this if VMDq is enabled */ - if (!adapter->vmdq_pools) - return; - - for (i = 0; i < hw->mac.uta_reg_count; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_UTA, i, ~0); -} - -/** - * igb_intr_msi - Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure - **/ -static irqreturn_t igb_intr_msi(int irq, void *data) -{ - struct igb_adapter *adapter = data; - struct igb_q_vector *q_vector = adapter->q_vector[0]; - struct e1000_hw *hw = &adapter->hw; - /* read ICR disables interrupts using IAM */ - u32 icr = E1000_READ_REG(hw, E1000_ICR); - - igb_write_itr(q_vector); - - if (icr & E1000_ICR_DRSTA) - schedule_work(&adapter->reset_task); - - if (icr & E1000_ICR_DOUTSYNC) { - /* HW is reporting DMA is out of sync */ - adapter->stats.doosync++; - } - - if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { - hw->mac.get_link_status = 1; - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - -#ifdef HAVE_PTP_1588_CLOCK - if (icr & E1000_ICR_TS) { - u32 tsicr = E1000_READ_REG(hw, E1000_TSICR); - - if (tsicr & E1000_TSICR_TXTS) { - /* acknowledge the interrupt */ - E1000_WRITE_REG(hw, E1000_TSICR, E1000_TSICR_TXTS); - /* retrieve hardware timestamp */ - schedule_work(&adapter->ptp_tx_work); - } - } -#endif /* HAVE_PTP_1588_CLOCK */ - - napi_schedule(&q_vector->napi); - - return IRQ_HANDLED; -} - -/** - * igb_intr - Legacy Interrupt Handler - * @irq: interrupt number - * @data: pointer to a network interface device structure - **/ -static irqreturn_t igb_intr(int irq, void *data) -{ - struct igb_adapter *adapter = data; - struct igb_q_vector *q_vector = adapter->q_vector[0]; - struct e1000_hw *hw = &adapter->hw; - /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No - * need for the IMC write */ - u32 icr = E1000_READ_REG(hw, E1000_ICR); - - /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is - * not set, then the adapter didn't send an interrupt */ - if (!(icr & E1000_ICR_INT_ASSERTED)) - return IRQ_NONE; - - igb_write_itr(q_vector); - - if (icr & E1000_ICR_DRSTA) - schedule_work(&adapter->reset_task); - - if (icr & E1000_ICR_DOUTSYNC) { - /* HW is reporting DMA is out of sync */ - adapter->stats.doosync++; - } - - if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { - hw->mac.get_link_status = 1; - /* guard against interrupt when we're going down */ - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->watchdog_timer, jiffies + 1); - } - -#ifdef HAVE_PTP_1588_CLOCK - if (icr & E1000_ICR_TS) { - u32 tsicr = E1000_READ_REG(hw, E1000_TSICR); - - if (tsicr & E1000_TSICR_TXTS) { - /* acknowledge the interrupt */ - E1000_WRITE_REG(hw, E1000_TSICR, E1000_TSICR_TXTS); - /* retrieve hardware timestamp */ - schedule_work(&adapter->ptp_tx_work); - } - } -#endif /* HAVE_PTP_1588_CLOCK */ - - napi_schedule(&q_vector->napi); - - return IRQ_HANDLED; -} - -void igb_ring_irq_enable(struct igb_q_vector *q_vector) -{ - struct igb_adapter *adapter = q_vector->adapter; - struct e1000_hw *hw = &adapter->hw; - - if ((q_vector->rx.ring && (adapter->rx_itr_setting & 3)) || - (!q_vector->rx.ring && (adapter->tx_itr_setting & 3))) { - if ((adapter->num_q_vectors == 1) && !adapter->vf_data) - igb_set_itr(q_vector); - else - igb_update_ring_itr(q_vector); - } - - if (!test_bit(__IGB_DOWN, &adapter->state)) { - if (adapter->msix_entries) - E1000_WRITE_REG(hw, E1000_EIMS, q_vector->eims_value); - else - igb_irq_enable(adapter); - } -} - -/** - * igb_poll - NAPI Rx polling callback - * @napi: napi polling structure - * @budget: count of how many packets we should handle - **/ -static int igb_poll(struct napi_struct *napi, int budget) -{ - struct igb_q_vector *q_vector = container_of(napi, struct igb_q_vector, napi); - bool clean_complete = true; - -#ifdef IGB_DCA - if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED) - igb_update_dca(q_vector); -#endif - if (q_vector->tx.ring) - clean_complete = igb_clean_tx_irq(q_vector); - - if (q_vector->rx.ring) - clean_complete &= igb_clean_rx_irq(q_vector, budget); - -#ifndef HAVE_NETDEV_NAPI_LIST - /* if netdev is disabled we need to stop polling */ - if (!netif_running(q_vector->adapter->netdev)) - clean_complete = true; - -#endif - /* If all work not completed, return budget and keep polling */ - if (!clean_complete) - return budget; - - /* If not enough Rx work done, exit the polling mode */ - napi_complete(napi); - igb_ring_irq_enable(q_vector); - - return 0; -} - -/** - * igb_clean_tx_irq - Reclaim resources after transmit completes - * @q_vector: pointer to q_vector containing needed info - * returns TRUE if ring is completely cleaned - **/ -static bool igb_clean_tx_irq(struct igb_q_vector *q_vector) -{ - struct igb_adapter *adapter = q_vector->adapter; - struct igb_ring *tx_ring = q_vector->tx.ring; - struct igb_tx_buffer *tx_buffer; - union e1000_adv_tx_desc *tx_desc; - unsigned int total_bytes = 0, total_packets = 0; - unsigned int budget = q_vector->tx.work_limit; - unsigned int i = tx_ring->next_to_clean; - - if (test_bit(__IGB_DOWN, &adapter->state)) - return true; - - tx_buffer = &tx_ring->tx_buffer_info[i]; - tx_desc = IGB_TX_DESC(tx_ring, i); - i -= tx_ring->count; - - do { - union e1000_adv_tx_desc *eop_desc = tx_buffer->next_to_watch; - - /* if next_to_watch is not set then there is no work pending */ - if (!eop_desc) - break; - - /* prevent any other reads prior to eop_desc */ - read_barrier_depends(); - - /* if DD is not set pending work has not been completed */ - if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD))) - break; - - /* clear next_to_watch to prevent false hangs */ - tx_buffer->next_to_watch = NULL; - - /* update the statistics for this packet */ - total_bytes += tx_buffer->bytecount; - total_packets += tx_buffer->gso_segs; - - /* free the skb */ - dev_kfree_skb_any(tx_buffer->skb); - - /* unmap skb header data */ - dma_unmap_single(tx_ring->dev, - dma_unmap_addr(tx_buffer, dma), - dma_unmap_len(tx_buffer, len), - DMA_TO_DEVICE); - - /* clear tx_buffer data */ - tx_buffer->skb = NULL; - dma_unmap_len_set(tx_buffer, len, 0); - - /* clear last DMA location and unmap remaining buffers */ - while (tx_desc != eop_desc) { - tx_buffer++; - tx_desc++; - i++; - if (unlikely(!i)) { - i -= tx_ring->count; - tx_buffer = tx_ring->tx_buffer_info; - tx_desc = IGB_TX_DESC(tx_ring, 0); - } - - /* unmap any remaining paged data */ - if (dma_unmap_len(tx_buffer, len)) { - dma_unmap_page(tx_ring->dev, - dma_unmap_addr(tx_buffer, dma), - dma_unmap_len(tx_buffer, len), - DMA_TO_DEVICE); - dma_unmap_len_set(tx_buffer, len, 0); - } - } - - /* move us one more past the eop_desc for start of next pkt */ - tx_buffer++; - tx_desc++; - i++; - if (unlikely(!i)) { - i -= tx_ring->count; - tx_buffer = tx_ring->tx_buffer_info; - tx_desc = IGB_TX_DESC(tx_ring, 0); - } - - /* issue prefetch for next Tx descriptor */ - prefetch(tx_desc); - - /* update budget accounting */ - budget--; - } while (likely(budget)); - - netdev_tx_completed_queue(txring_txq(tx_ring), - total_packets, total_bytes); - - i += tx_ring->count; - tx_ring->next_to_clean = i; - tx_ring->tx_stats.bytes += total_bytes; - tx_ring->tx_stats.packets += total_packets; - q_vector->tx.total_bytes += total_bytes; - q_vector->tx.total_packets += total_packets; - -#ifdef DEBUG - if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags) && - !(adapter->disable_hw_reset && adapter->tx_hang_detected)) { -#else - if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags)) { -#endif - struct e1000_hw *hw = &adapter->hw; - - /* Detect a transmit hang in hardware, this serializes the - * check with the clearing of time_stamp and movement of i */ - clear_bit(IGB_RING_FLAG_TX_DETECT_HANG, &tx_ring->flags); - if (tx_buffer->next_to_watch && - time_after(jiffies, tx_buffer->time_stamp + - (adapter->tx_timeout_factor * HZ)) - && !(E1000_READ_REG(hw, E1000_STATUS) & - E1000_STATUS_TXOFF)) { - - /* detected Tx unit hang */ -#ifdef DEBUG - adapter->tx_hang_detected = TRUE; - if (adapter->disable_hw_reset) { - DPRINTK(DRV, WARNING, - "Deactivating netdev watchdog timer\n"); - if (del_timer(&netdev_ring(tx_ring)->watchdog_timer)) - dev_put(netdev_ring(tx_ring)); -#ifndef HAVE_NET_DEVICE_OPS - netdev_ring(tx_ring)->tx_timeout = NULL; -#endif - } -#endif /* DEBUG */ - dev_err(tx_ring->dev, - "Detected Tx Unit Hang\n" - " Tx Queue <%d>\n" - " TDH <%x>\n" - " TDT <%x>\n" - " next_to_use <%x>\n" - " next_to_clean <%x>\n" - "buffer_info[next_to_clean]\n" - " time_stamp <%lx>\n" - " next_to_watch <%p>\n" - " jiffies <%lx>\n" - " desc.status <%x>\n", - tx_ring->queue_index, - E1000_READ_REG(hw, E1000_TDH(tx_ring->reg_idx)), - readl(tx_ring->tail), - tx_ring->next_to_use, - tx_ring->next_to_clean, - tx_buffer->time_stamp, - tx_buffer->next_to_watch, - jiffies, - tx_buffer->next_to_watch->wb.status); - if (netif_is_multiqueue(netdev_ring(tx_ring))) - netif_stop_subqueue(netdev_ring(tx_ring), - ring_queue_index(tx_ring)); - else - netif_stop_queue(netdev_ring(tx_ring)); - - /* we are about to reset, no point in enabling stuff */ - return true; - } - } - -#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) - if (unlikely(total_packets && - netif_carrier_ok(netdev_ring(tx_ring)) && - igb_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD)) { - /* Make sure that anybody stopping the queue after this - * sees the new next_to_clean. - */ - smp_mb(); - if (netif_is_multiqueue(netdev_ring(tx_ring))) { - if (__netif_subqueue_stopped(netdev_ring(tx_ring), - ring_queue_index(tx_ring)) && - !(test_bit(__IGB_DOWN, &adapter->state))) { - netif_wake_subqueue(netdev_ring(tx_ring), - ring_queue_index(tx_ring)); - tx_ring->tx_stats.restart_queue++; - } - } else { - if (netif_queue_stopped(netdev_ring(tx_ring)) && - !(test_bit(__IGB_DOWN, &adapter->state))) { - netif_wake_queue(netdev_ring(tx_ring)); - tx_ring->tx_stats.restart_queue++; - } - } - } - - return !!budget; -} - -#ifdef HAVE_VLAN_RX_REGISTER -/** - * igb_receive_skb - helper function to handle rx indications - * @q_vector: structure containing interrupt and ring information - * @skb: packet to send up - **/ -static void igb_receive_skb(struct igb_q_vector *q_vector, - struct sk_buff *skb) -{ - struct vlan_group **vlgrp = netdev_priv(skb->dev); - - if (IGB_CB(skb)->vid) { - if (*vlgrp) { - vlan_gro_receive(&q_vector->napi, *vlgrp, - IGB_CB(skb)->vid, skb); - } else { - dev_kfree_skb_any(skb); - } - } else { - napi_gro_receive(&q_vector->napi, skb); - } -} - -#endif /* HAVE_VLAN_RX_REGISTER */ -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT -/** - * igb_reuse_rx_page - page flip buffer and store it back on the ring - * @rx_ring: rx descriptor ring to store buffers on - * @old_buff: donor buffer to have page reused - * - * Synchronizes page for reuse by the adapter - **/ -static void igb_reuse_rx_page(struct igb_ring *rx_ring, - struct igb_rx_buffer *old_buff) -{ - struct igb_rx_buffer *new_buff; - u16 nta = rx_ring->next_to_alloc; - - new_buff = &rx_ring->rx_buffer_info[nta]; - - /* update, and store next to alloc */ - nta++; - rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0; - - /* transfer page from old buffer to new buffer */ - memcpy(new_buff, old_buff, sizeof(struct igb_rx_buffer)); - - /* sync the buffer for use by the device */ - dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma, - old_buff->page_offset, - IGB_RX_BUFSZ, - DMA_FROM_DEVICE); -} - -static bool igb_can_reuse_rx_page(struct igb_rx_buffer *rx_buffer, - struct page *page, - unsigned int truesize) -{ - /* avoid re-using remote pages */ - if (unlikely(page_to_nid(page) != numa_node_id())) - return false; - -#if (PAGE_SIZE < 8192) - /* if we are only owner of page we can reuse it */ - if (unlikely(page_count(page) != 1)) - return false; - - /* flip page offset to other buffer */ - rx_buffer->page_offset ^= IGB_RX_BUFSZ; - -#else - /* move offset up to the next cache line */ - rx_buffer->page_offset += truesize; - - if (rx_buffer->page_offset > (PAGE_SIZE - IGB_RX_BUFSZ)) - return false; -#endif - - /* bump ref count on page before it is given to the stack */ - get_page(page); - - return true; -} - -/** - * igb_add_rx_frag - Add contents of Rx buffer to sk_buff - * @rx_ring: rx descriptor ring to transact packets on - * @rx_buffer: buffer containing page to add - * @rx_desc: descriptor containing length of buffer written by hardware - * @skb: sk_buff to place the data into - * - * This function will add the data contained in rx_buffer->page to the skb. - * This is done either through a direct copy if the data in the buffer is - * less than the skb header size, otherwise it will just attach the page as - * a frag to the skb. - * - * The function will then update the page offset if necessary and return - * true if the buffer can be reused by the adapter. - **/ -static bool igb_add_rx_frag(struct igb_ring *rx_ring, - struct igb_rx_buffer *rx_buffer, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - struct page *page = rx_buffer->page; - unsigned int size = le16_to_cpu(rx_desc->wb.upper.length); -#if (PAGE_SIZE < 8192) - unsigned int truesize = IGB_RX_BUFSZ; -#else - unsigned int truesize = ALIGN(size, L1_CACHE_BYTES); -#endif - - if ((size <= IGB_RX_HDR_LEN) && !skb_is_nonlinear(skb)) { - unsigned char *va = page_address(page) + rx_buffer->page_offset; - -#ifdef HAVE_PTP_1588_CLOCK - if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { - igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb); - va += IGB_TS_HDR_LEN; - size -= IGB_TS_HDR_LEN; - } -#endif /* HAVE_PTP_1588_CLOCK */ - - memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long))); - - /* we can reuse buffer as-is, just make sure it is local */ - if (likely(page_to_nid(page) == numa_node_id())) - return true; - - /* this page cannot be reused so discard it */ - put_page(page); - return false; - } - - skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, - rx_buffer->page_offset, size, truesize); - - return igb_can_reuse_rx_page(rx_buffer, page, truesize); -} - -static struct sk_buff *igb_fetch_rx_buffer(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - struct igb_rx_buffer *rx_buffer; - struct page *page; - - rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; - - page = rx_buffer->page; - prefetchw(page); - - if (likely(!skb)) { - void *page_addr = page_address(page) + - rx_buffer->page_offset; - - /* prefetch first cache line of first page */ - prefetch(page_addr); -#if L1_CACHE_BYTES < 128 - prefetch(page_addr + L1_CACHE_BYTES); -#endif - - /* allocate a skb to store the frags */ - skb = netdev_alloc_skb_ip_align(rx_ring->netdev, - IGB_RX_HDR_LEN); - if (unlikely(!skb)) { - rx_ring->rx_stats.alloc_failed++; - return NULL; - } - - /* - * we will be copying header into skb->data in - * pskb_may_pull so it is in our interest to prefetch - * it now to avoid a possible cache miss - */ - prefetchw(skb->data); - } - - /* we are reusing so sync this buffer for CPU use */ - dma_sync_single_range_for_cpu(rx_ring->dev, - rx_buffer->dma, - rx_buffer->page_offset, - IGB_RX_BUFSZ, - DMA_FROM_DEVICE); - - /* pull page into skb */ - if (igb_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) { - /* hand second half of page back to the ring */ - igb_reuse_rx_page(rx_ring, rx_buffer); - } else { - /* we are not reusing the buffer so unmap it */ - dma_unmap_page(rx_ring->dev, rx_buffer->dma, - PAGE_SIZE, DMA_FROM_DEVICE); - } - - /* clear contents of rx_buffer */ - rx_buffer->page = NULL; - - return skb; -} - -#endif -static inline void igb_rx_checksum(struct igb_ring *ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - skb_checksum_none_assert(skb); - - /* Ignore Checksum bit is set */ - if (igb_test_staterr(rx_desc, E1000_RXD_STAT_IXSM)) - return; - - /* Rx checksum disabled via ethtool */ - if (!(netdev_ring(ring)->features & NETIF_F_RXCSUM)) - return; - - /* TCP/UDP checksum error bit is set */ - if (igb_test_staterr(rx_desc, - E1000_RXDEXT_STATERR_TCPE | - E1000_RXDEXT_STATERR_IPE)) { - /* - * work around errata with sctp packets where the TCPE aka - * L4E bit is set incorrectly on 64 byte (60 byte w/o crc) - * packets, (aka let the stack check the crc32c) - */ - if (!((skb->len == 60) && - test_bit(IGB_RING_FLAG_RX_SCTP_CSUM, &ring->flags))) - ring->rx_stats.csum_err++; - - /* let the stack verify checksum errors */ - return; - } - /* It must be a TCP or UDP packet with a valid checksum */ - if (igb_test_staterr(rx_desc, E1000_RXD_STAT_TCPCS | - E1000_RXD_STAT_UDPCS)) - skb->ip_summed = CHECKSUM_UNNECESSARY; -} - -#ifdef NETIF_F_RXHASH -static inline void igb_rx_hash(struct igb_ring *ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - if (netdev_ring(ring)->features & NETIF_F_RXHASH) - skb_set_hash(skb, le32_to_cpu(rx_desc->wb.lower.hi_dword.rss), - PKT_HASH_TYPE_L3); -} - -#endif -#ifndef IGB_NO_LRO -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT -/** - * igb_merge_active_tail - merge active tail into lro skb - * @tail: pointer to active tail in frag_list - * - * This function merges the length and data of an active tail into the - * skb containing the frag_list. It resets the tail's pointer to the head, - * but it leaves the heads pointer to tail intact. - **/ -static inline struct sk_buff *igb_merge_active_tail(struct sk_buff *tail) -{ - struct sk_buff *head = IGB_CB(tail)->head; - - if (!head) - return tail; - - head->len += tail->len; - head->data_len += tail->len; - head->truesize += tail->len; - - IGB_CB(tail)->head = NULL; - - return head; -} - -/** - * igb_add_active_tail - adds an active tail into the skb frag_list - * @head: pointer to the start of the skb - * @tail: pointer to active tail to add to frag_list - * - * This function adds an active tail to the end of the frag list. This tail - * will still be receiving data so we cannot yet ad it's stats to the main - * skb. That is done via igb_merge_active_tail. - **/ -static inline void igb_add_active_tail(struct sk_buff *head, struct sk_buff *tail) -{ - struct sk_buff *old_tail = IGB_CB(head)->tail; - - if (old_tail) { - igb_merge_active_tail(old_tail); - old_tail->next = tail; - } else { - skb_shinfo(head)->frag_list = tail; - } - - IGB_CB(tail)->head = head; - IGB_CB(head)->tail = tail; - - IGB_CB(head)->append_cnt++; -} - -/** - * igb_close_active_frag_list - cleanup pointers on a frag_list skb - * @head: pointer to head of an active frag list - * - * This function will clear the frag_tail_tracker pointer on an active - * frag_list and returns true if the pointer was actually set - **/ -static inline bool igb_close_active_frag_list(struct sk_buff *head) -{ - struct sk_buff *tail = IGB_CB(head)->tail; - - if (!tail) - return false; - - igb_merge_active_tail(tail); - - IGB_CB(head)->tail = NULL; - - return true; -} - -#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ -/** - * igb_can_lro - returns true if packet is TCP/IPV4 and LRO is enabled - * @adapter: board private structure - * @rx_desc: pointer to the rx descriptor - * @skb: pointer to the skb to be merged - * - **/ -static inline bool igb_can_lro(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - struct iphdr *iph = (struct iphdr *)skb->data; - __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; - - /* verify hardware indicates this is IPv4/TCP */ - if((!(pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_TCP)) || - !(pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV4)))) - return false; - - /* .. and LRO is enabled */ - if (!(netdev_ring(rx_ring)->features & NETIF_F_LRO)) - return false; - - /* .. and we are not in promiscuous mode */ - if (netdev_ring(rx_ring)->flags & IFF_PROMISC) - return false; - - /* .. and the header is large enough for us to read IP/TCP fields */ - if (!pskb_may_pull(skb, sizeof(struct igb_lrohdr))) - return false; - - /* .. and there are no VLANs on packet */ - if (skb->protocol != __constant_htons(ETH_P_IP)) - return false; - - /* .. and we are version 4 with no options */ - if (*(u8 *)iph != 0x45) - return false; - - /* .. and the packet is not fragmented */ - if (iph->frag_off & htons(IP_MF | IP_OFFSET)) - return false; - - /* .. and that next header is TCP */ - if (iph->protocol != IPPROTO_TCP) - return false; - - return true; -} - -static inline struct igb_lrohdr *igb_lro_hdr(struct sk_buff *skb) -{ - return (struct igb_lrohdr *)skb->data; -} - -/** - * igb_lro_flush - Indicate packets to upper layer. - * - * Update IP and TCP header part of head skb if more than one - * skb's chained and indicate packets to upper layer. - **/ -static void igb_lro_flush(struct igb_q_vector *q_vector, - struct sk_buff *skb) -{ - struct igb_lro_list *lrolist = &q_vector->lrolist; - - __skb_unlink(skb, &lrolist->active); - - if (IGB_CB(skb)->append_cnt) { - struct igb_lrohdr *lroh = igb_lro_hdr(skb); - -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - /* close any active lro contexts */ - igb_close_active_frag_list(skb); - -#endif - /* incorporate ip header and re-calculate checksum */ - lroh->iph.tot_len = ntohs(skb->len); - lroh->iph.check = 0; - - /* header length is 5 since we know no options exist */ - lroh->iph.check = ip_fast_csum((u8 *)lroh, 5); - - /* clear TCP checksum to indicate we are an LRO frame */ - lroh->th.check = 0; - - /* incorporate latest timestamp into the tcp header */ - if (IGB_CB(skb)->tsecr) { - lroh->ts[2] = IGB_CB(skb)->tsecr; - lroh->ts[1] = htonl(IGB_CB(skb)->tsval); - } -#ifdef NETIF_F_GSO - - skb_shinfo(skb)->gso_size = IGB_CB(skb)->mss; - skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; -#endif - } - -#ifdef HAVE_VLAN_RX_REGISTER - igb_receive_skb(q_vector, skb); -#else - napi_gro_receive(&q_vector->napi, skb); -#endif - lrolist->stats.flushed++; -} - -static void igb_lro_flush_all(struct igb_q_vector *q_vector) -{ - struct igb_lro_list *lrolist = &q_vector->lrolist; - struct sk_buff *skb, *tmp; - - skb_queue_reverse_walk_safe(&lrolist->active, skb, tmp) - igb_lro_flush(q_vector, skb); -} - -/* - * igb_lro_header_ok - Main LRO function. - **/ -static void igb_lro_header_ok(struct sk_buff *skb) -{ - struct igb_lrohdr *lroh = igb_lro_hdr(skb); - u16 opt_bytes, data_len; - -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - IGB_CB(skb)->tail = NULL; -#endif - IGB_CB(skb)->tsecr = 0; - IGB_CB(skb)->append_cnt = 0; - IGB_CB(skb)->mss = 0; - - /* ensure that the checksum is valid */ - if (skb->ip_summed != CHECKSUM_UNNECESSARY) - return; - - /* If we see CE codepoint in IP header, packet is not mergeable */ - if (INET_ECN_is_ce(ipv4_get_dsfield(&lroh->iph))) - return; - - /* ensure no bits set besides ack or psh */ - if (lroh->th.fin || lroh->th.syn || lroh->th.rst || - lroh->th.urg || lroh->th.ece || lroh->th.cwr || - !lroh->th.ack) - return; - - /* store the total packet length */ - data_len = ntohs(lroh->iph.tot_len); - - /* remove any padding from the end of the skb */ - __pskb_trim(skb, data_len); - - /* remove header length from data length */ - data_len -= sizeof(struct igb_lrohdr); - - /* - * check for timestamps. Since the only option we handle are timestamps, - * we only have to handle the simple case of aligned timestamps - */ - opt_bytes = (lroh->th.doff << 2) - sizeof(struct tcphdr); - if (opt_bytes != 0) { - if ((opt_bytes != TCPOLEN_TSTAMP_ALIGNED) || - !pskb_may_pull(skb, sizeof(struct igb_lrohdr) + - TCPOLEN_TSTAMP_ALIGNED) || - (lroh->ts[0] != htonl((TCPOPT_NOP << 24) | - (TCPOPT_NOP << 16) | - (TCPOPT_TIMESTAMP << 8) | - TCPOLEN_TIMESTAMP)) || - (lroh->ts[2] == 0)) { - return; - } - - IGB_CB(skb)->tsval = ntohl(lroh->ts[1]); - IGB_CB(skb)->tsecr = lroh->ts[2]; - - data_len -= TCPOLEN_TSTAMP_ALIGNED; - } - - /* record data_len as mss for the packet */ - IGB_CB(skb)->mss = data_len; - IGB_CB(skb)->next_seq = ntohl(lroh->th.seq); -} - -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT -static void igb_merge_frags(struct sk_buff *lro_skb, struct sk_buff *new_skb) -{ - struct skb_shared_info *sh_info; - struct skb_shared_info *new_skb_info; - unsigned int data_len; - - sh_info = skb_shinfo(lro_skb); - new_skb_info = skb_shinfo(new_skb); - - /* copy frags into the last skb */ - memcpy(sh_info->frags + sh_info->nr_frags, - new_skb_info->frags, - new_skb_info->nr_frags * sizeof(skb_frag_t)); - - /* copy size data over */ - sh_info->nr_frags += new_skb_info->nr_frags; - data_len = IGB_CB(new_skb)->mss; - lro_skb->len += data_len; - lro_skb->data_len += data_len; - lro_skb->truesize += data_len; - - /* wipe record of data from new_skb */ - new_skb_info->nr_frags = 0; - new_skb->len = new_skb->data_len = 0; - dev_kfree_skb_any(new_skb); -} - -#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ -/** - * igb_lro_receive - if able, queue skb into lro chain - * @q_vector: structure containing interrupt and ring information - * @new_skb: pointer to current skb being checked - * - * Checks whether the skb given is eligible for LRO and if that's - * fine chains it to the existing lro_skb based on flowid. If an LRO for - * the flow doesn't exist create one. - **/ -static void igb_lro_receive(struct igb_q_vector *q_vector, - struct sk_buff *new_skb) -{ - struct sk_buff *lro_skb; - struct igb_lro_list *lrolist = &q_vector->lrolist; - struct igb_lrohdr *lroh = igb_lro_hdr(new_skb); - __be32 saddr = lroh->iph.saddr; - __be32 daddr = lroh->iph.daddr; - __be32 tcp_ports = *(__be32 *)&lroh->th; - u16 data_len; -#ifdef HAVE_VLAN_RX_REGISTER - u16 vid = IGB_CB(new_skb)->vid; -#else - u16 vid = new_skb->vlan_tci; -#endif - - igb_lro_header_ok(new_skb); - - /* - * we have a packet that might be eligible for LRO, - * so see if it matches anything we might expect - */ - skb_queue_walk(&lrolist->active, lro_skb) { - if (*(__be32 *)&igb_lro_hdr(lro_skb)->th != tcp_ports || - igb_lro_hdr(lro_skb)->iph.saddr != saddr || - igb_lro_hdr(lro_skb)->iph.daddr != daddr) - continue; - -#ifdef HAVE_VLAN_RX_REGISTER - if (IGB_CB(lro_skb)->vid != vid) -#else - if (lro_skb->vlan_tci != vid) -#endif - continue; - - /* out of order packet */ - if (IGB_CB(lro_skb)->next_seq != IGB_CB(new_skb)->next_seq) { - igb_lro_flush(q_vector, lro_skb); - IGB_CB(new_skb)->mss = 0; - break; - } - - /* TCP timestamp options have changed */ - if (!IGB_CB(lro_skb)->tsecr != !IGB_CB(new_skb)->tsecr) { - igb_lro_flush(q_vector, lro_skb); - break; - } - - /* make sure timestamp values are increasing */ - if (IGB_CB(lro_skb)->tsecr && - IGB_CB(lro_skb)->tsval > IGB_CB(new_skb)->tsval) { - igb_lro_flush(q_vector, lro_skb); - IGB_CB(new_skb)->mss = 0; - break; - } - - data_len = IGB_CB(new_skb)->mss; - - /* Check for all of the above below - * malformed header - * no tcp data - * resultant packet would be too large - * new skb is larger than our current mss - * data would remain in header - * we would consume more frags then the sk_buff contains - * ack sequence numbers changed - * window size has changed - */ - if (data_len == 0 || - data_len > IGB_CB(lro_skb)->mss || - data_len > IGB_CB(lro_skb)->free || -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - data_len != new_skb->data_len || - skb_shinfo(new_skb)->nr_frags >= - (MAX_SKB_FRAGS - skb_shinfo(lro_skb)->nr_frags) || -#endif - igb_lro_hdr(lro_skb)->th.ack_seq != lroh->th.ack_seq || - igb_lro_hdr(lro_skb)->th.window != lroh->th.window) { - igb_lro_flush(q_vector, lro_skb); - break; - } - - /* Remove IP and TCP header*/ - skb_pull(new_skb, new_skb->len - data_len); - - /* update timestamp and timestamp echo response */ - IGB_CB(lro_skb)->tsval = IGB_CB(new_skb)->tsval; - IGB_CB(lro_skb)->tsecr = IGB_CB(new_skb)->tsecr; - - /* update sequence and free space */ - IGB_CB(lro_skb)->next_seq += data_len; - IGB_CB(lro_skb)->free -= data_len; - - /* update append_cnt */ - IGB_CB(lro_skb)->append_cnt++; - -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - /* if header is empty pull pages into current skb */ - igb_merge_frags(lro_skb, new_skb); -#else - /* chain this new skb in frag_list */ - igb_add_active_tail(lro_skb, new_skb); -#endif - - if ((data_len < IGB_CB(lro_skb)->mss) || lroh->th.psh || - skb_shinfo(lro_skb)->nr_frags == MAX_SKB_FRAGS) { - igb_lro_hdr(lro_skb)->th.psh |= lroh->th.psh; - igb_lro_flush(q_vector, lro_skb); - } - - lrolist->stats.coal++; - return; - } - - if (IGB_CB(new_skb)->mss && !lroh->th.psh) { - /* if we are at capacity flush the tail */ - if (skb_queue_len(&lrolist->active) >= IGB_LRO_MAX) { - lro_skb = skb_peek_tail(&lrolist->active); - if (lro_skb) - igb_lro_flush(q_vector, lro_skb); - } - - /* update sequence and free space */ - IGB_CB(new_skb)->next_seq += IGB_CB(new_skb)->mss; - IGB_CB(new_skb)->free = 65521 - new_skb->len; - - /* .. and insert at the front of the active list */ - __skb_queue_head(&lrolist->active, new_skb); - - lrolist->stats.coal++; - return; - } - - /* packet not handled by any of the above, pass it to the stack */ -#ifdef HAVE_VLAN_RX_REGISTER - igb_receive_skb(q_vector, new_skb); -#else - napi_gro_receive(&q_vector->napi, new_skb); -#endif -} - -#endif /* IGB_NO_LRO */ -/** - * igb_process_skb_fields - Populate skb header fields from Rx descriptor - * @rx_ring: rx descriptor ring packet is being transacted on - * @rx_desc: pointer to the EOP Rx descriptor - * @skb: pointer to current skb being populated - * - * This function checks the ring, descriptor, and packet information in - * order to populate the hash, checksum, VLAN, timestamp, protocol, and - * other fields within the skb. - **/ -static void igb_process_skb_fields(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - struct net_device *dev = rx_ring->netdev; - __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; - -#ifdef NETIF_F_RXHASH - igb_rx_hash(rx_ring, rx_desc, skb); - -#endif - igb_rx_checksum(rx_ring, rx_desc, skb); - - /* update packet type stats */ - if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV4)) - rx_ring->rx_stats.ipv4_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV4_EX)) - rx_ring->rx_stats.ipv4e_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV6)) - rx_ring->rx_stats.ipv6_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_IPV6_EX)) - rx_ring->rx_stats.ipv6e_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_TCP)) - rx_ring->rx_stats.tcp_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_UDP)) - rx_ring->rx_stats.udp_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_SCTP)) - rx_ring->rx_stats.sctp_packets++; - else if (pkt_info & cpu_to_le16(E1000_RXDADV_PKTTYPE_NFS)) - rx_ring->rx_stats.nfs_packets++; - -#ifdef HAVE_PTP_1588_CLOCK - igb_ptp_rx_hwtstamp(rx_ring, rx_desc, skb); -#endif /* HAVE_PTP_1588_CLOCK */ - -#ifdef NETIF_F_HW_VLAN_CTAG_RX - if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) && -#else - if ((dev->features & NETIF_F_HW_VLAN_RX) && -#endif - igb_test_staterr(rx_desc, E1000_RXD_STAT_VP)) { - u16 vid = 0; - if (igb_test_staterr(rx_desc, E1000_RXDEXT_STATERR_LB) && - test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP, &rx_ring->flags)) - vid = be16_to_cpu(rx_desc->wb.upper.vlan); - else - vid = le16_to_cpu(rx_desc->wb.upper.vlan); -#ifdef HAVE_VLAN_RX_REGISTER - IGB_CB(skb)->vid = vid; - } else { - IGB_CB(skb)->vid = 0; -#else - -#ifdef HAVE_VLAN_PROTOCOL - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); -#else - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); -#endif - - -#endif - } - - skb_record_rx_queue(skb, rx_ring->queue_index); - - skb->protocol = eth_type_trans(skb, dev); -} - -/** - * igb_is_non_eop - process handling of non-EOP buffers - * @rx_ring: Rx ring being processed - * @rx_desc: Rx descriptor for current buffer - * - * This function updates next to clean. If the buffer is an EOP buffer - * this function exits returning false, otherwise it will place the - * sk_buff in the next buffer to be chained and return true indicating - * that this is in fact a non-EOP buffer. - **/ -static bool igb_is_non_eop(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc) -{ - u32 ntc = rx_ring->next_to_clean + 1; - - /* fetch, update, and store next to clean */ - ntc = (ntc < rx_ring->count) ? ntc : 0; - rx_ring->next_to_clean = ntc; - - prefetch(IGB_RX_DESC(rx_ring, ntc)); - - if (likely(igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP))) - return false; - - return true; -} - -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT -/* igb_clean_rx_irq -- * legacy */ -static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, int budget) -{ - struct igb_ring *rx_ring = q_vector->rx.ring; - unsigned int total_bytes = 0, total_packets = 0; - u16 cleaned_count = igb_desc_unused(rx_ring); - - do { - struct igb_rx_buffer *rx_buffer; - union e1000_adv_rx_desc *rx_desc; - struct sk_buff *skb; - u16 ntc; - - /* return some buffers to hardware, one at a time is too slow */ - if (cleaned_count >= IGB_RX_BUFFER_WRITE) { - igb_alloc_rx_buffers(rx_ring, cleaned_count); - cleaned_count = 0; - } - - ntc = rx_ring->next_to_clean; - rx_desc = IGB_RX_DESC(rx_ring, ntc); - rx_buffer = &rx_ring->rx_buffer_info[ntc]; - - if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) - break; - - /* - * This memory barrier is needed to keep us from reading - * any other fields out of the rx_desc until we know the - * RXD_STAT_DD bit is set - */ - rmb(); - - skb = rx_buffer->skb; - - prefetch(skb->data); - - /* pull the header of the skb in */ - __skb_put(skb, le16_to_cpu(rx_desc->wb.upper.length)); - - /* clear skb reference in buffer info structure */ - rx_buffer->skb = NULL; - - cleaned_count++; - - BUG_ON(igb_is_non_eop(rx_ring, rx_desc)); - - dma_unmap_single(rx_ring->dev, rx_buffer->dma, - rx_ring->rx_buffer_len, - DMA_FROM_DEVICE); - rx_buffer->dma = 0; - - if (igb_test_staterr(rx_desc, - E1000_RXDEXT_ERR_FRAME_ERR_MASK)) { - dev_kfree_skb_any(skb); - continue; - } - - total_bytes += skb->len; - - /* populate checksum, timestamp, VLAN, and protocol */ - igb_process_skb_fields(rx_ring, rx_desc, skb); - -#ifndef IGB_NO_LRO - if (igb_can_lro(rx_ring, rx_desc, skb)) - igb_lro_receive(q_vector, skb); - else -#endif -#ifdef HAVE_VLAN_RX_REGISTER - igb_receive_skb(q_vector, skb); -#else - napi_gro_receive(&q_vector->napi, skb); -#endif - -#ifndef NETIF_F_GRO - netdev_ring(rx_ring)->last_rx = jiffies; - -#endif - /* update budget accounting */ - total_packets++; - } while (likely(total_packets < budget)); - - rx_ring->rx_stats.packets += total_packets; - rx_ring->rx_stats.bytes += total_bytes; - q_vector->rx.total_packets += total_packets; - q_vector->rx.total_bytes += total_bytes; - - if (cleaned_count) - igb_alloc_rx_buffers(rx_ring, cleaned_count); - -#ifndef IGB_NO_LRO - igb_lro_flush_all(q_vector); - -#endif /* IGB_NO_LRO */ - return total_packets < budget; -} -#else /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ -/** - * igb_get_headlen - determine size of header for LRO/GRO - * @data: pointer to the start of the headers - * @max_len: total length of section to find headers in - * - * This function is meant to determine the length of headers that will - * be recognized by hardware for LRO, and GRO offloads. The main - * motivation of doing this is to only perform one pull for IPv4 TCP - * packets so that we can do basic things like calculating the gso_size - * based on the average data per packet. - **/ -static unsigned int igb_get_headlen(unsigned char *data, - unsigned int max_len) -{ - union { - unsigned char *network; - /* l2 headers */ - struct ethhdr *eth; - struct vlan_hdr *vlan; - /* l3 headers */ - struct iphdr *ipv4; - struct ipv6hdr *ipv6; - } hdr; - __be16 protocol; - u8 nexthdr = 0; /* default to not TCP */ - u8 hlen; - - /* this should never happen, but better safe than sorry */ - if (max_len < ETH_HLEN) - return max_len; - - /* initialize network frame pointer */ - hdr.network = data; - - /* set first protocol and move network header forward */ - protocol = hdr.eth->h_proto; - hdr.network += ETH_HLEN; - - /* handle any vlan tag if present */ - if (protocol == __constant_htons(ETH_P_8021Q)) { - if ((hdr.network - data) > (max_len - VLAN_HLEN)) - return max_len; - - protocol = hdr.vlan->h_vlan_encapsulated_proto; - hdr.network += VLAN_HLEN; - } - - /* handle L3 protocols */ - if (protocol == __constant_htons(ETH_P_IP)) { - if ((hdr.network - data) > (max_len - sizeof(struct iphdr))) - return max_len; - - /* access ihl as a u8 to avoid unaligned access on ia64 */ - hlen = (hdr.network[0] & 0x0F) << 2; - - /* verify hlen meets minimum size requirements */ - if (hlen < sizeof(struct iphdr)) - return hdr.network - data; - - /* record next protocol if header is present */ - if (!(hdr.ipv4->frag_off & htons(IP_OFFSET))) - nexthdr = hdr.ipv4->protocol; -#ifdef NETIF_F_TSO6 - } else if (protocol == __constant_htons(ETH_P_IPV6)) { - if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr))) - return max_len; - - /* record next protocol */ - nexthdr = hdr.ipv6->nexthdr; - hlen = sizeof(struct ipv6hdr); -#endif /* NETIF_F_TSO6 */ - } else { - return hdr.network - data; - } - - /* relocate pointer to start of L4 header */ - hdr.network += hlen; - - /* finally sort out TCP */ - if (nexthdr == IPPROTO_TCP) { - if ((hdr.network - data) > (max_len - sizeof(struct tcphdr))) - return max_len; - - /* access doff as a u8 to avoid unaligned access on ia64 */ - hlen = (hdr.network[12] & 0xF0) >> 2; - - /* verify hlen meets minimum size requirements */ - if (hlen < sizeof(struct tcphdr)) - return hdr.network - data; - - hdr.network += hlen; - } else if (nexthdr == IPPROTO_UDP) { - if ((hdr.network - data) > (max_len - sizeof(struct udphdr))) - return max_len; - - hdr.network += sizeof(struct udphdr); - } - - /* - * If everything has gone correctly hdr.network should be the - * data section of the packet and will be the end of the header. - * If not then it probably represents the end of the last recognized - * header. - */ - if ((hdr.network - data) < max_len) - return hdr.network - data; - else - return max_len; -} - -/** - * igb_pull_tail - igb specific version of skb_pull_tail - * @rx_ring: rx descriptor ring packet is being transacted on - * @rx_desc: pointer to the EOP Rx descriptor - * @skb: pointer to current skb being adjusted - * - * This function is an igb specific version of __pskb_pull_tail. The - * main difference between this version and the original function is that - * this function can make several assumptions about the state of things - * that allow for significant optimizations versus the standard function. - * As a result we can do things like drop a frag and maintain an accurate - * truesize for the skb. - */ -static void igb_pull_tail(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; - unsigned char *va; - unsigned int pull_len; - - /* - * it is valid to use page_address instead of kmap since we are - * working with pages allocated out of the lomem pool per - * alloc_page(GFP_ATOMIC) - */ - va = skb_frag_address(frag); - -#ifdef HAVE_PTP_1588_CLOCK - if (igb_test_staterr(rx_desc, E1000_RXDADV_STAT_TSIP)) { - /* retrieve timestamp from buffer */ - igb_ptp_rx_pktstamp(rx_ring->q_vector, va, skb); - - /* update pointers to remove timestamp header */ - skb_frag_size_sub(frag, IGB_TS_HDR_LEN); - frag->page_offset += IGB_TS_HDR_LEN; - skb->data_len -= IGB_TS_HDR_LEN; - skb->len -= IGB_TS_HDR_LEN; - - /* move va to start of packet data */ - va += IGB_TS_HDR_LEN; - } -#endif /* HAVE_PTP_1588_CLOCK */ - - /* - * we need the header to contain the greater of either ETH_HLEN or - * 60 bytes if the skb->len is less than 60 for skb_pad. - */ - pull_len = igb_get_headlen(va, IGB_RX_HDR_LEN); - - /* align pull length to size of long to optimize memcpy performance */ - skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long))); - - /* update all of the pointers */ - skb_frag_size_sub(frag, pull_len); - frag->page_offset += pull_len; - skb->data_len -= pull_len; - skb->tail += pull_len; -} - -/** - * igb_cleanup_headers - Correct corrupted or empty headers - * @rx_ring: rx descriptor ring packet is being transacted on - * @rx_desc: pointer to the EOP Rx descriptor - * @skb: pointer to current skb being fixed - * - * Address the case where we are pulling data in on pages only - * and as such no data is present in the skb header. - * - * In addition if skb is not at least 60 bytes we need to pad it so that - * it is large enough to qualify as a valid Ethernet frame. - * - * Returns true if an error was encountered and skb was freed. - **/ -static bool igb_cleanup_headers(struct igb_ring *rx_ring, - union e1000_adv_rx_desc *rx_desc, - struct sk_buff *skb) -{ - - if (unlikely((igb_test_staterr(rx_desc, - E1000_RXDEXT_ERR_FRAME_ERR_MASK)))) { - struct net_device *netdev = rx_ring->netdev; - if (!(netdev->features & NETIF_F_RXALL)) { - dev_kfree_skb_any(skb); - return true; - } - } - - /* place header in linear portion of buffer */ - if (skb_is_nonlinear(skb)) - igb_pull_tail(rx_ring, rx_desc, skb); - - /* if skb_pad returns an error the skb was freed */ - if (unlikely(skb->len < 60)) { - int pad_len = 60 - skb->len; - - if (skb_pad(skb, pad_len)) - return true; - __skb_put(skb, pad_len); - } - - return false; -} - -/* igb_clean_rx_irq -- * packet split */ -static bool igb_clean_rx_irq(struct igb_q_vector *q_vector, int budget) -{ - struct igb_ring *rx_ring = q_vector->rx.ring; - struct sk_buff *skb = rx_ring->skb; - unsigned int total_bytes = 0, total_packets = 0; - u16 cleaned_count = igb_desc_unused(rx_ring); - - do { - union e1000_adv_rx_desc *rx_desc; - - /* return some buffers to hardware, one at a time is too slow */ - if (cleaned_count >= IGB_RX_BUFFER_WRITE) { - igb_alloc_rx_buffers(rx_ring, cleaned_count); - cleaned_count = 0; - } - - rx_desc = IGB_RX_DESC(rx_ring, rx_ring->next_to_clean); - - if (!igb_test_staterr(rx_desc, E1000_RXD_STAT_DD)) - break; - - /* - * This memory barrier is needed to keep us from reading - * any other fields out of the rx_desc until we know the - * RXD_STAT_DD bit is set - */ - rmb(); - - /* retrieve a buffer from the ring */ - skb = igb_fetch_rx_buffer(rx_ring, rx_desc, skb); - - /* exit if we failed to retrieve a buffer */ - if (!skb) - break; - - cleaned_count++; - - /* fetch next buffer in frame if non-eop */ - if (igb_is_non_eop(rx_ring, rx_desc)) - continue; - - /* verify the packet layout is correct */ - if (igb_cleanup_headers(rx_ring, rx_desc, skb)) { - skb = NULL; - continue; - } - - /* probably a little skewed due to removing CRC */ - total_bytes += skb->len; - - /* populate checksum, timestamp, VLAN, and protocol */ - igb_process_skb_fields(rx_ring, rx_desc, skb); - -#ifndef IGB_NO_LRO - if (igb_can_lro(rx_ring, rx_desc, skb)) - igb_lro_receive(q_vector, skb); - else -#endif -#ifdef HAVE_VLAN_RX_REGISTER - igb_receive_skb(q_vector, skb); -#else - napi_gro_receive(&q_vector->napi, skb); -#endif -#ifndef NETIF_F_GRO - - netdev_ring(rx_ring)->last_rx = jiffies; -#endif - - /* reset skb pointer */ - skb = NULL; - - /* update budget accounting */ - total_packets++; - } while (likely(total_packets < budget)); - - /* place incomplete frames back on ring for completion */ - rx_ring->skb = skb; - - rx_ring->rx_stats.packets += total_packets; - rx_ring->rx_stats.bytes += total_bytes; - q_vector->rx.total_packets += total_packets; - q_vector->rx.total_bytes += total_bytes; - - if (cleaned_count) - igb_alloc_rx_buffers(rx_ring, cleaned_count); - -#ifndef IGB_NO_LRO - igb_lro_flush_all(q_vector); - -#endif /* IGB_NO_LRO */ - return total_packets < budget; -} -#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ - -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT -static bool igb_alloc_mapped_skb(struct igb_ring *rx_ring, - struct igb_rx_buffer *bi) -{ - struct sk_buff *skb = bi->skb; - dma_addr_t dma = bi->dma; - - if (dma) - return true; - - if (likely(!skb)) { - skb = netdev_alloc_skb_ip_align(netdev_ring(rx_ring), - rx_ring->rx_buffer_len); - bi->skb = skb; - if (!skb) { - rx_ring->rx_stats.alloc_failed++; - return false; - } - - /* initialize skb for ring */ - skb_record_rx_queue(skb, ring_queue_index(rx_ring)); - } - - dma = dma_map_single(rx_ring->dev, skb->data, - rx_ring->rx_buffer_len, DMA_FROM_DEVICE); - - /* if mapping failed free memory back to system since - * there isn't much point in holding memory we can't use - */ - if (dma_mapping_error(rx_ring->dev, dma)) { - dev_kfree_skb_any(skb); - bi->skb = NULL; - - rx_ring->rx_stats.alloc_failed++; - return false; - } - - bi->dma = dma; - return true; -} - -#else /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ -static bool igb_alloc_mapped_page(struct igb_ring *rx_ring, - struct igb_rx_buffer *bi) -{ - struct page *page = bi->page; - dma_addr_t dma; - - /* since we are recycling buffers we should seldom need to alloc */ - if (likely(page)) - return true; - - /* alloc new page for storage */ - page = alloc_page(GFP_ATOMIC | __GFP_COLD); - if (unlikely(!page)) { - rx_ring->rx_stats.alloc_failed++; - return false; - } - - /* map page for use */ - dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE); - - /* - * if mapping failed free memory back to system since - * there isn't much point in holding memory we can't use - */ - if (dma_mapping_error(rx_ring->dev, dma)) { - __free_page(page); - - rx_ring->rx_stats.alloc_failed++; - return false; - } - - bi->dma = dma; - bi->page = page; - bi->page_offset = 0; - - return true; -} - -#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ -/** - * igb_alloc_rx_buffers - Replace used receive buffers; packet split - * @adapter: address of board private structure - **/ -void igb_alloc_rx_buffers(struct igb_ring *rx_ring, u16 cleaned_count) -{ - union e1000_adv_rx_desc *rx_desc; - struct igb_rx_buffer *bi; - u16 i = rx_ring->next_to_use; - - /* nothing to do */ - if (!cleaned_count) - return; - - rx_desc = IGB_RX_DESC(rx_ring, i); - bi = &rx_ring->rx_buffer_info[i]; - i -= rx_ring->count; - - do { -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - if (!igb_alloc_mapped_skb(rx_ring, bi)) -#else - if (!igb_alloc_mapped_page(rx_ring, bi)) -#endif /* CONFIG_IGB_DISABLE_PACKET_SPLIT */ - break; - - /* - * Refresh the desc even if buffer_addrs didn't change - * because each write-back erases this info. - */ -#ifdef CONFIG_IGB_DISABLE_PACKET_SPLIT - rx_desc->read.pkt_addr = cpu_to_le64(bi->dma); -#else - rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); -#endif - - rx_desc++; - bi++; - i++; - if (unlikely(!i)) { - rx_desc = IGB_RX_DESC(rx_ring, 0); - bi = rx_ring->rx_buffer_info; - i -= rx_ring->count; - } - - /* clear the hdr_addr for the next_to_use descriptor */ - rx_desc->read.hdr_addr = 0; - - cleaned_count--; - } while (cleaned_count); - - i += rx_ring->count; - - if (rx_ring->next_to_use != i) { - /* record the next descriptor to use */ - rx_ring->next_to_use = i; - -#ifndef CONFIG_IGB_DISABLE_PACKET_SPLIT - /* update next to alloc since we have filled the ring */ - rx_ring->next_to_alloc = i; - -#endif - /* - * Force memory writes to complete before letting h/w - * know there are new descriptors to fetch. (Only - * applicable for weak-ordered memory model archs, - * such as IA-64). - */ - wmb(); - writel(i, rx_ring->tail); - } -} - -#ifdef SIOCGMIIPHY -/** - * igb_mii_ioctl - - * @netdev: - * @ifreq: - * @cmd: - **/ -static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct mii_ioctl_data *data = if_mii(ifr); - - if (adapter->hw.phy.media_type != e1000_media_type_copper) - return -EOPNOTSUPP; - - switch (cmd) { - case SIOCGMIIPHY: - data->phy_id = adapter->hw.phy.addr; - break; - case SIOCGMIIREG: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F, - &data->val_out)) - return -EIO; - break; - case SIOCSMIIREG: - default: - return -EOPNOTSUPP; - } - return E1000_SUCCESS; -} - -#endif -/** - * igb_ioctl - - * @netdev: - * @ifreq: - * @cmd: - **/ -static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -{ - switch (cmd) { -#ifdef SIOCGMIIPHY - case SIOCGMIIPHY: - case SIOCGMIIREG: - case SIOCSMIIREG: - return igb_mii_ioctl(netdev, ifr, cmd); -#endif -#ifdef HAVE_PTP_1588_CLOCK - case SIOCSHWTSTAMP: - return igb_ptp_hwtstamp_ioctl(netdev, ifr, cmd); -#endif /* HAVE_PTP_1588_CLOCK */ -#ifdef ETHTOOL_OPS_COMPAT - case SIOCETHTOOL: - return ethtool_ioctl(ifr); -#endif - default: - return -EOPNOTSUPP; - } -} - -s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) -{ - struct igb_adapter *adapter = hw->back; - u16 cap_offset; - - cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); - if (!cap_offset) - return -E1000_ERR_CONFIG; - - pci_read_config_word(adapter->pdev, cap_offset + reg, value); - - return E1000_SUCCESS; -} - -s32 e1000_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) -{ - struct igb_adapter *adapter = hw->back; - u16 cap_offset; - - cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); - if (!cap_offset) - return -E1000_ERR_CONFIG; - - pci_write_config_word(adapter->pdev, cap_offset + reg, *value); - - return E1000_SUCCESS; -} - -#ifdef HAVE_VLAN_RX_REGISTER -static void igb_vlan_mode(struct net_device *netdev, struct vlan_group *vlgrp) -#else -void igb_vlan_mode(struct net_device *netdev, u32 features) -#endif -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 ctrl, rctl; - int i; -#ifdef HAVE_VLAN_RX_REGISTER - bool enable = !!vlgrp; - - igb_irq_disable(adapter); - - adapter->vlgrp = vlgrp; - - if (!test_bit(__IGB_DOWN, &adapter->state)) - igb_irq_enable(adapter); -#else -#ifdef NETIF_F_HW_VLAN_CTAG_RX - bool enable = !!(features & NETIF_F_HW_VLAN_CTAG_RX); -#else - bool enable = !!(features & NETIF_F_HW_VLAN_RX); -#endif -#endif - - if (enable) { - /* enable VLAN tag insert/strip */ - ctrl = E1000_READ_REG(hw, E1000_CTRL); - ctrl |= E1000_CTRL_VME; - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - - /* Disable CFI check */ - rctl = E1000_READ_REG(hw, E1000_RCTL); - rctl &= ~E1000_RCTL_CFIEN; - E1000_WRITE_REG(hw, E1000_RCTL, rctl); - } else { - /* disable VLAN tag insert/strip */ - ctrl = E1000_READ_REG(hw, E1000_CTRL); - ctrl &= ~E1000_CTRL_VME; - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - } - -#ifndef CONFIG_IGB_VMDQ_NETDEV - for (i = 0; i < adapter->vmdq_pools; i++) { - igb_set_vf_vlan_strip(adapter, - adapter->vfs_allocated_count + i, - enable); - } - -#else - igb_set_vf_vlan_strip(adapter, - adapter->vfs_allocated_count, - enable); - - for (i = 1; i < adapter->vmdq_pools; i++) { -#ifdef HAVE_VLAN_RX_REGISTER - struct igb_vmdq_adapter *vadapter; - vadapter = netdev_priv(adapter->vmdq_netdev[i-1]); - enable = !!vadapter->vlgrp; -#else - struct net_device *vnetdev; - vnetdev = adapter->vmdq_netdev[i-1]; -#ifdef NETIF_F_HW_VLAN_CTAG_RX - enable = !!(vnetdev->features & NETIF_F_HW_VLAN_CTAG_RX); -#else - enable = !!(vnetdev->features & NETIF_F_HW_VLAN_RX); -#endif -#endif - igb_set_vf_vlan_strip(adapter, - adapter->vfs_allocated_count + i, - enable); - } - -#endif - igb_rlpml_set(adapter); -} - -#ifdef HAVE_VLAN_PROTOCOL -static int igb_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid) -#elif defined HAVE_INT_NDO_VLAN_RX_ADD_VID -#ifdef NETIF_F_HW_VLAN_CTAG_RX -static int igb_vlan_rx_add_vid(struct net_device *netdev, - __always_unused __be16 proto, u16 vid) -#else -static int igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid) -#endif -#else -static void igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid) -#endif -{ - struct igb_adapter *adapter = netdev_priv(netdev); - int pf_id = adapter->vfs_allocated_count; - - /* attempt to add filter to vlvf array */ - igb_vlvf_set(adapter, vid, TRUE, pf_id); - - /* add the filter since PF can receive vlans w/o entry in vlvf */ - igb_vfta_set(adapter, vid, TRUE); -#ifndef HAVE_NETDEV_VLAN_FEATURES - - /* Copy feature flags from netdev to the vlan netdev for this vid. - * This allows things like TSO to bubble down to our vlan device. - * There is no need to update netdev for vlan 0 (DCB), since it - * wouldn't has v_netdev. - */ - if (adapter->vlgrp) { - struct vlan_group *vlgrp = adapter->vlgrp; - struct net_device *v_netdev = vlan_group_get_device(vlgrp, vid); - if (v_netdev) { - v_netdev->features |= netdev->features; - vlan_group_set_device(vlgrp, vid, v_netdev); - } - } -#endif -#ifndef HAVE_VLAN_RX_REGISTER - - set_bit(vid, adapter->active_vlans); -#endif -#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID - return 0; -#endif -} - -#ifdef HAVE_VLAN_PROTOCOL -static int igb_vlan_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid) -#elif defined HAVE_INT_NDO_VLAN_RX_ADD_VID -#ifdef NETIF_F_HW_VLAN_CTAG_RX -static int igb_vlan_rx_kill_vid(struct net_device *netdev, - __always_unused __be16 proto, u16 vid) -#else -static int igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) -#endif -#else -static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) -#endif -{ - struct igb_adapter *adapter = netdev_priv(netdev); - int pf_id = adapter->vfs_allocated_count; - s32 err; - -#ifdef HAVE_VLAN_RX_REGISTER - igb_irq_disable(adapter); - - vlan_group_set_device(adapter->vlgrp, vid, NULL); - - if (!test_bit(__IGB_DOWN, &adapter->state)) - igb_irq_enable(adapter); - -#endif /* HAVE_VLAN_RX_REGISTER */ - /* remove vlan from VLVF table array */ - err = igb_vlvf_set(adapter, vid, FALSE, pf_id); - - /* if vid was not present in VLVF just remove it from table */ - if (err) - igb_vfta_set(adapter, vid, FALSE); -#ifndef HAVE_VLAN_RX_REGISTER - - clear_bit(vid, adapter->active_vlans); -#endif -#ifdef HAVE_INT_NDO_VLAN_RX_ADD_VID - return 0; -#endif -} - -static void igb_restore_vlan(struct igb_adapter *adapter) -{ -#ifdef HAVE_VLAN_RX_REGISTER - igb_vlan_mode(adapter->netdev, adapter->vlgrp); - - if (adapter->vlgrp) { - u16 vid; - for (vid = 0; vid < VLAN_N_VID; vid++) { - if (!vlan_group_get_device(adapter->vlgrp, vid)) - continue; -#ifdef NETIF_F_HW_VLAN_CTAG_RX - igb_vlan_rx_add_vid(adapter->netdev, - htons(ETH_P_8021Q), vid); -#else - igb_vlan_rx_add_vid(adapter->netdev, vid); -#endif - } - } -#else - u16 vid; - - igb_vlan_mode(adapter->netdev, adapter->netdev->features); - - for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) -#ifdef NETIF_F_HW_VLAN_CTAG_RX - igb_vlan_rx_add_vid(adapter->netdev, - htons(ETH_P_8021Q), vid); -#else - igb_vlan_rx_add_vid(adapter->netdev, vid); -#endif -#endif -} - -int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx) -{ - struct pci_dev *pdev = adapter->pdev; - struct e1000_mac_info *mac = &adapter->hw.mac; - - mac->autoneg = 0; - - /* SerDes device's does not support 10Mbps Full/duplex - * and 100Mbps Half duplex - */ - if (adapter->hw.phy.media_type == e1000_media_type_internal_serdes) { - switch (spddplx) { - case SPEED_10 + DUPLEX_HALF: - case SPEED_10 + DUPLEX_FULL: - case SPEED_100 + DUPLEX_HALF: - dev_err(pci_dev_to_dev(pdev), - "Unsupported Speed/Duplex configuration\n"); - return -EINVAL; - default: - break; - } - } - - switch (spddplx) { - case SPEED_10 + DUPLEX_HALF: - mac->forced_speed_duplex = ADVERTISE_10_HALF; - break; - case SPEED_10 + DUPLEX_FULL: - mac->forced_speed_duplex = ADVERTISE_10_FULL; - break; - case SPEED_100 + DUPLEX_HALF: - mac->forced_speed_duplex = ADVERTISE_100_HALF; - break; - case SPEED_100 + DUPLEX_FULL: - mac->forced_speed_duplex = ADVERTISE_100_FULL; - break; - case SPEED_1000 + DUPLEX_FULL: - mac->autoneg = 1; - adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL; - break; - case SPEED_1000 + DUPLEX_HALF: /* not supported */ - default: - dev_err(pci_dev_to_dev(pdev), "Unsupported Speed/Duplex configuration\n"); - return -EINVAL; - } - - /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */ - adapter->hw.phy.mdix = AUTO_ALL_MODES; - - return 0; -} - -static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake, - bool runtime) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 ctrl, rctl, status; - u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol; -#ifdef CONFIG_PM - int retval = 0; -#endif - - netif_device_detach(netdev); - - status = E1000_READ_REG(hw, E1000_STATUS); - if (status & E1000_STATUS_LU) - wufc &= ~E1000_WUFC_LNKC; - - if (netif_running(netdev)) - __igb_close(netdev, true); - - igb_clear_interrupt_scheme(adapter); - -#ifdef CONFIG_PM - retval = pci_save_state(pdev); - if (retval) - return retval; -#endif - - if (wufc) { - igb_setup_rctl(adapter); - igb_set_rx_mode(netdev); - - /* turn on all-multi mode if wake on multicast is enabled */ - if (wufc & E1000_WUFC_MC) { - rctl = E1000_READ_REG(hw, E1000_RCTL); - rctl |= E1000_RCTL_MPE; - E1000_WRITE_REG(hw, E1000_RCTL, rctl); - } - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - /* phy power management enable */ - #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 - ctrl |= E1000_CTRL_ADVD3WUC; - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - - /* Allow time for pending master requests to run */ - e1000_disable_pcie_master(hw); - - E1000_WRITE_REG(hw, E1000_WUC, E1000_WUC_PME_EN); - E1000_WRITE_REG(hw, E1000_WUFC, wufc); - } else { - E1000_WRITE_REG(hw, E1000_WUC, 0); - E1000_WRITE_REG(hw, E1000_WUFC, 0); - } - - *enable_wake = wufc || adapter->en_mng_pt; - if (!*enable_wake) - igb_power_down_link(adapter); - else - igb_power_up_link(adapter); - - /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ - igb_release_hw_control(adapter); - - pci_disable_device(pdev); - - return 0; -} - -#ifdef CONFIG_PM -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS -static int igb_suspend(struct device *dev) -#else -static int igb_suspend(struct pci_dev *pdev, pm_message_t state) -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ -{ -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS - struct pci_dev *pdev = to_pci_dev(dev); -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ - int retval; - bool wake; - - retval = __igb_shutdown(pdev, &wake, 0); - if (retval) - return retval; - - if (wake) { - pci_prepare_to_sleep(pdev); - } else { - pci_wake_from_d3(pdev, false); - pci_set_power_state(pdev, PCI_D3hot); - } - - return 0; -} - -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS -static int igb_resume(struct device *dev) -#else -static int igb_resume(struct pci_dev *pdev) -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ -{ -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS - struct pci_dev *pdev = to_pci_dev(dev); -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - u32 err; - - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - pci_save_state(pdev); - - err = pci_enable_device_mem(pdev); - if (err) { - dev_err(pci_dev_to_dev(pdev), - "igb: Cannot enable PCI device from suspend\n"); - return err; - } - pci_set_master(pdev); - - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - - if (igb_init_interrupt_scheme(adapter, true)) { - dev_err(pci_dev_to_dev(pdev), "Unable to allocate memory for queues\n"); - return -ENOMEM; - } - - igb_reset(adapter); - - /* let the f/w know that the h/w is now under the control of the - * driver. */ - igb_get_hw_control(adapter); - - E1000_WRITE_REG(hw, E1000_WUS, ~0); - - if (netdev->flags & IFF_UP) { - rtnl_lock(); - err = __igb_open(netdev, true); - rtnl_unlock(); - if (err) - return err; - } - - netif_device_attach(netdev); - - return 0; -} - -#ifdef CONFIG_PM_RUNTIME -#ifdef HAVE_SYSTEM_SLEEP_PM_OPS -static int igb_runtime_idle(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - - if (!igb_has_link(adapter)) - pm_schedule_suspend(dev, MSEC_PER_SEC * 5); - - return -EBUSY; -} - -static int igb_runtime_suspend(struct device *dev) -{ - struct pci_dev *pdev = to_pci_dev(dev); - int retval; - bool wake; - - retval = __igb_shutdown(pdev, &wake, 1); - if (retval) - return retval; - - if (wake) { - pci_prepare_to_sleep(pdev); - } else { - pci_wake_from_d3(pdev, false); - pci_set_power_state(pdev, PCI_D3hot); - } - - return 0; -} - -static int igb_runtime_resume(struct device *dev) -{ - return igb_resume(dev); -} -#endif /* HAVE_SYSTEM_SLEEP_PM_OPS */ -#endif /* CONFIG_PM_RUNTIME */ -#endif /* CONFIG_PM */ - -#ifdef USE_REBOOT_NOTIFIER -/* only want to do this for 2.4 kernels? */ -static int igb_notify_reboot(struct notifier_block *nb, unsigned long event, - void *p) -{ - struct pci_dev *pdev = NULL; - bool wake; - - switch (event) { - case SYS_DOWN: - case SYS_HALT: - case SYS_POWER_OFF: - while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) { - if (pci_dev_driver(pdev) == &igb_driver) { - __igb_shutdown(pdev, &wake, 0); - if (event == SYS_POWER_OFF) { - pci_wake_from_d3(pdev, wake); - pci_set_power_state(pdev, PCI_D3hot); - } - } - } - } - return NOTIFY_DONE; -} -#else -static void igb_shutdown(struct pci_dev *pdev) -{ - bool wake = false; - - __igb_shutdown(pdev, &wake, 0); - - if (system_state == SYSTEM_POWER_OFF) { - pci_wake_from_d3(pdev, wake); - pci_set_power_state(pdev, PCI_D3hot); - } -} -#endif /* USE_REBOOT_NOTIFIER */ - -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling 'interrupt' - used by things like netconsole to send skbs - * without having to re-enable interrupts. It's not called while - * the interrupt routine is executing. - */ -static void igb_netpoll(struct net_device *netdev) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - struct igb_q_vector *q_vector; - int i; - - for (i = 0; i < adapter->num_q_vectors; i++) { - q_vector = adapter->q_vector[i]; - if (adapter->msix_entries) - E1000_WRITE_REG(hw, E1000_EIMC, q_vector->eims_value); - else - igb_irq_disable(adapter); - napi_schedule(&q_vector->napi); - } -} -#endif /* CONFIG_NET_POLL_CONTROLLER */ - -#ifdef HAVE_PCI_ERS -#define E1000_DEV_ID_82576_VF 0x10CA -/** - * igb_io_error_detected - called when PCI error is detected - * @pdev: Pointer to PCI device - * @state: The current pci connection state - * - * This function is called after a PCI bus error affecting - * this device has been detected. - */ -static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev, - pci_channel_state_t state) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - -#ifdef CONFIG_PCI_IOV__UNUSED - struct pci_dev *bdev, *vfdev; - u32 dw0, dw1, dw2, dw3; - int vf, pos; - u16 req_id, pf_func; - - if (!(adapter->flags & IGB_FLAG_DETECT_BAD_DMA)) - goto skip_bad_vf_detection; - - bdev = pdev->bus->self; - while (bdev && (pci_pcie_type(bdev) != PCI_EXP_TYPE_ROOT_PORT)) - bdev = bdev->bus->self; - - if (!bdev) - goto skip_bad_vf_detection; - - pos = pci_find_ext_capability(bdev, PCI_EXT_CAP_ID_ERR); - if (!pos) - goto skip_bad_vf_detection; - - pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG, &dw0); - pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 4, &dw1); - pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 8, &dw2); - pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 12, &dw3); - - req_id = dw1 >> 16; - /* On the 82576 if bit 7 of the requestor ID is set then it's a VF */ - if (!(req_id & 0x0080)) - goto skip_bad_vf_detection; - - pf_func = req_id & 0x01; - if ((pf_func & 1) == (pdev->devfn & 1)) { - - vf = (req_id & 0x7F) >> 1; - dev_err(pci_dev_to_dev(pdev), - "VF %d has caused a PCIe error\n", vf); - dev_err(pci_dev_to_dev(pdev), - "TLP: dw0: %8.8x\tdw1: %8.8x\tdw2: " - "%8.8x\tdw3: %8.8x\n", - dw0, dw1, dw2, dw3); - - /* Find the pci device of the offending VF */ - vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, - E1000_DEV_ID_82576_VF, NULL); - while (vfdev) { - if (vfdev->devfn == (req_id & 0xFF)) - break; - vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, - E1000_DEV_ID_82576_VF, vfdev); - } - /* - * There's a slim chance the VF could have been hot plugged, - * so if it is no longer present we don't need to issue the - * VFLR. Just clean up the AER in that case. - */ - if (vfdev) { - dev_err(pci_dev_to_dev(pdev), - "Issuing VFLR to VF %d\n", vf); - pci_write_config_dword(vfdev, 0xA8, 0x00008000); - } - - pci_cleanup_aer_uncorrect_error_status(pdev); - } - - /* - * Even though the error may have occurred on the other port - * we still need to increment the vf error reference count for - * both ports because the I/O resume function will be called - * for both of them. - */ - adapter->vferr_refcount++; - - return PCI_ERS_RESULT_RECOVERED; - -skip_bad_vf_detection: -#endif /* CONFIG_PCI_IOV */ - - netif_device_detach(netdev); - - if (state == pci_channel_io_perm_failure) - return PCI_ERS_RESULT_DISCONNECT; - - if (netif_running(netdev)) - igb_down(adapter); - pci_disable_device(pdev); - - /* Request a slot slot reset. */ - return PCI_ERS_RESULT_NEED_RESET; -} - -/** - * igb_io_slot_reset - called after the pci bus has been reset. - * @pdev: Pointer to PCI device - * - * Restart the card from scratch, as if from a cold-boot. Implementation - * resembles the first-half of the igb_resume routine. - */ -static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - pci_ers_result_t result; - - if (pci_enable_device_mem(pdev)) { - dev_err(pci_dev_to_dev(pdev), - "Cannot re-enable PCI device after reset.\n"); - result = PCI_ERS_RESULT_DISCONNECT; - } else { - pci_set_master(pdev); - pci_restore_state(pdev); - pci_save_state(pdev); - - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); - - schedule_work(&adapter->reset_task); - E1000_WRITE_REG(hw, E1000_WUS, ~0); - result = PCI_ERS_RESULT_RECOVERED; - } - - pci_cleanup_aer_uncorrect_error_status(pdev); - - return result; -} - -/** - * igb_io_resume - called when traffic can start flowing again. - * @pdev: Pointer to PCI device - * - * This callback is called when the error recovery driver tells us that - * its OK to resume normal operation. Implementation resembles the - * second-half of the igb_resume routine. - */ -static void igb_io_resume(struct pci_dev *pdev) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct igb_adapter *adapter = netdev_priv(netdev); - - if (adapter->vferr_refcount) { - dev_info(pci_dev_to_dev(pdev), "Resuming after VF err\n"); - adapter->vferr_refcount--; - return; - } - - if (netif_running(netdev)) { - if (igb_up(adapter)) { - dev_err(pci_dev_to_dev(pdev), "igb_up failed after reset\n"); - return; - } - } - - netif_device_attach(netdev); - - /* let the f/w know that the h/w is now under the control of the - * driver. */ - igb_get_hw_control(adapter); -} - -#endif /* HAVE_PCI_ERS */ - -int igb_add_mac_filter(struct igb_adapter *adapter, u8 *addr, u16 queue) -{ - struct e1000_hw *hw = &adapter->hw; - int i; - - if (is_zero_ether_addr(addr)) - return 0; - - for (i = 0; i < hw->mac.rar_entry_count; i++) { - if (adapter->mac_table[i].state & IGB_MAC_STATE_IN_USE) - continue; - adapter->mac_table[i].state = (IGB_MAC_STATE_MODIFIED | - IGB_MAC_STATE_IN_USE); - memcpy(adapter->mac_table[i].addr, addr, ETH_ALEN); - adapter->mac_table[i].queue = queue; - igb_sync_mac_table(adapter); - return 0; - } - return -ENOMEM; -} -int igb_del_mac_filter(struct igb_adapter *adapter, u8* addr, u16 queue) -{ - /* search table for addr, if found, set to 0 and sync */ - int i; - struct e1000_hw *hw = &adapter->hw; - - if (is_zero_ether_addr(addr)) - return 0; - for (i = 0; i < hw->mac.rar_entry_count; i++) { - if (ether_addr_equal(addr, adapter->mac_table[i].addr) && - adapter->mac_table[i].queue == queue) { - adapter->mac_table[i].state = IGB_MAC_STATE_MODIFIED; - memset(adapter->mac_table[i].addr, 0, ETH_ALEN); - adapter->mac_table[i].queue = 0; - igb_sync_mac_table(adapter); - return 0; - } - } - return -ENOMEM; -} -static int igb_set_vf_mac(struct igb_adapter *adapter, - int vf, unsigned char *mac_addr) -{ - igb_del_mac_filter(adapter, adapter->vf_data[vf].vf_mac_addresses, vf); - memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN); - - igb_add_mac_filter(adapter, mac_addr, vf); - - return 0; -} - -#ifdef IFLA_VF_MAX -static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count)) - return -EINVAL; - adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC; - dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf); - dev_info(&adapter->pdev->dev, "Reload the VF driver to make this" - " change effective.\n"); - if (test_bit(__IGB_DOWN, &adapter->state)) { - dev_warn(&adapter->pdev->dev, "The VF MAC address has been set," - " but the PF device is not up.\n"); - dev_warn(&adapter->pdev->dev, "Bring the PF device up before" - " attempting to use the VF device.\n"); - } - return igb_set_vf_mac(adapter, vf, mac); -} - -static int igb_link_mbps(int internal_link_speed) -{ - switch (internal_link_speed) { - case SPEED_100: - return 100; - case SPEED_1000: - return 1000; - case SPEED_2500: - return 2500; - default: - return 0; - } -} - -static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate, - int link_speed) -{ - int rf_dec, rf_int; - u32 bcnrc_val; - - if (tx_rate != 0) { - /* Calculate the rate factor values to set */ - rf_int = link_speed / tx_rate; - rf_dec = (link_speed - (rf_int * tx_rate)); - rf_dec = (rf_dec * (1<<E1000_RTTBCNRC_RF_INT_SHIFT)) / tx_rate; - - bcnrc_val = E1000_RTTBCNRC_RS_ENA; - bcnrc_val |= ((rf_int<<E1000_RTTBCNRC_RF_INT_SHIFT) & - E1000_RTTBCNRC_RF_INT_MASK); - bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK); - } else { - bcnrc_val = 0; - } - - E1000_WRITE_REG(hw, E1000_RTTDQSEL, vf); /* vf X uses queue X */ - /* - * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM - * register. MMW_SIZE=0x014 if 9728-byte jumbo is supported. - */ - E1000_WRITE_REG(hw, E1000_RTTBCNRM(0), 0x14); - E1000_WRITE_REG(hw, E1000_RTTBCNRC, bcnrc_val); -} - -static void igb_check_vf_rate_limit(struct igb_adapter *adapter) -{ - int actual_link_speed, i; - bool reset_rate = false; - - /* VF TX rate limit was not set */ - if ((adapter->vf_rate_link_speed == 0) || - (adapter->hw.mac.type != e1000_82576)) - return; - - actual_link_speed = igb_link_mbps(adapter->link_speed); - if (actual_link_speed != adapter->vf_rate_link_speed) { - reset_rate = true; - adapter->vf_rate_link_speed = 0; - dev_info(&adapter->pdev->dev, - "Link speed has been changed. VF Transmit rate is disabled\n"); - } - - for (i = 0; i < adapter->vfs_allocated_count; i++) { - if (reset_rate) - adapter->vf_data[i].tx_rate = 0; - - igb_set_vf_rate_limit(&adapter->hw, i, - adapter->vf_data[i].tx_rate, actual_link_speed); - } -} - -#ifdef HAVE_VF_MIN_MAX_TXRATE -static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate, - int tx_rate) -#else /* HAVE_VF_MIN_MAX_TXRATE */ -static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate) -#endif /* HAVE_VF_MIN_MAX_TXRATE */ -{ - struct igb_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; - int actual_link_speed; - - if (hw->mac.type != e1000_82576) - return -EOPNOTSUPP; - -#ifdef HAVE_VF_MIN_MAX_TXRATE - if (min_tx_rate) - return -EINVAL; -#endif /* HAVE_VF_MIN_MAX_TXRATE */ - - actual_link_speed = igb_link_mbps(adapter->link_speed); - if ((vf >= adapter->vfs_allocated_count) || - (!(E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) || - (tx_rate < 0) || (tx_rate > actual_link_speed)) - return -EINVAL; - - adapter->vf_rate_link_speed = actual_link_speed; - adapter->vf_data[vf].tx_rate = (u16)tx_rate; - igb_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed); - - return 0; -} - -static int igb_ndo_get_vf_config(struct net_device *netdev, - int vf, struct ifla_vf_info *ivi) -{ - struct igb_adapter *adapter = netdev_priv(netdev); - if (vf >= adapter->vfs_allocated_count) - return -EINVAL; - ivi->vf = vf; - memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN); -#ifdef HAVE_VF_MIN_MAX_TXRATE - ivi->max_tx_rate = adapter->vf_data[vf].tx_rate; - ivi->min_tx_rate = 0; -#else /* HAVE_VF_MIN_MAX_TXRATE */ - ivi->tx_rate = adapter->vf_data[vf].tx_rate; -#endif /* HAVE_VF_MIN_MAX_TXRATE */ - ivi->vlan = adapter->vf_data[vf].pf_vlan; - ivi->qos = adapter->vf_data[vf].pf_qos; -#ifdef HAVE_VF_SPOOFCHK_CONFIGURE - ivi->spoofchk = adapter->vf_data[vf].spoofchk_enabled; -#endif - return 0; -} -#endif -static void igb_vmm_control(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - int count; - u32 reg; - - switch (hw->mac.type) { - case e1000_82575: - default: - /* replication is not supported for 82575 */ - return; - case e1000_82576: - /* notify HW that the MAC is adding vlan tags */ - reg = E1000_READ_REG(hw, E1000_DTXCTL); - reg |= (E1000_DTXCTL_VLAN_ADDED | - E1000_DTXCTL_SPOOF_INT); - E1000_WRITE_REG(hw, E1000_DTXCTL, reg); - case e1000_82580: - /* enable replication vlan tag stripping */ - reg = E1000_READ_REG(hw, E1000_RPLOLR); - reg |= E1000_RPLOLR_STRVLAN; - E1000_WRITE_REG(hw, E1000_RPLOLR, reg); - case e1000_i350: - case e1000_i354: - /* none of the above registers are supported by i350 */ - break; - } - - /* Enable Malicious Driver Detection */ - if ((adapter->vfs_allocated_count) && - (adapter->mdd)) { - if (hw->mac.type == e1000_i350) - igb_enable_mdd(adapter); - } - - /* enable replication and loopback support */ - count = adapter->vfs_allocated_count || adapter->vmdq_pools; - if (adapter->flags & IGB_FLAG_LOOPBACK_ENABLE && count) - e1000_vmdq_set_loopback_pf(hw, 1); - e1000_vmdq_set_anti_spoofing_pf(hw, - adapter->vfs_allocated_count || adapter->vmdq_pools, - adapter->vfs_allocated_count); - e1000_vmdq_set_replication_pf(hw, adapter->vfs_allocated_count || - adapter->vmdq_pools); -} - -static void igb_init_fw(struct igb_adapter *adapter) -{ - struct e1000_fw_drv_info fw_cmd; - struct e1000_hw *hw = &adapter->hw; - int i; - u16 mask; - - if (hw->mac.type == e1000_i210) - mask = E1000_SWFW_EEP_SM; - else - mask = E1000_SWFW_PHY0_SM; - /* i211 parts do not support this feature */ - if (hw->mac.type == e1000_i211) - hw->mac.arc_subsystem_valid = false; - - if (!hw->mac.ops.acquire_swfw_sync(hw, mask)) { - for (i = 0; i <= FW_MAX_RETRIES; i++) { - E1000_WRITE_REG(hw, E1000_FWSTS, E1000_FWSTS_FWRI); - fw_cmd.hdr.cmd = FW_CMD_DRV_INFO; - fw_cmd.hdr.buf_len = FW_CMD_DRV_INFO_LEN; - fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CMD_RESERVED; - fw_cmd.port_num = hw->bus.func; - fw_cmd.drv_version = FW_FAMILY_DRV_VER; - fw_cmd.hdr.checksum = 0; - fw_cmd.hdr.checksum = e1000_calculate_checksum((u8 *)&fw_cmd, - (FW_HDR_LEN + - fw_cmd.hdr.buf_len)); - e1000_host_interface_command(hw, (u8*)&fw_cmd, - sizeof(fw_cmd)); - if (fw_cmd.hdr.cmd_or_resp.ret_status == FW_STATUS_SUCCESS) - break; - } - } else - dev_warn(pci_dev_to_dev(adapter->pdev), - "Unable to get semaphore, firmware init failed.\n"); - hw->mac.ops.release_swfw_sync(hw, mask); -} - -static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) -{ - struct e1000_hw *hw = &adapter->hw; - u32 dmac_thr; - u16 hwm; - u32 status; - - if (hw->mac.type == e1000_i211) - return; - - if (hw->mac.type > e1000_82580) { - if (adapter->dmac != IGB_DMAC_DISABLE) { - u32 reg; - - /* force threshold to 0. */ - E1000_WRITE_REG(hw, E1000_DMCTXTH, 0); - - /* - * DMA Coalescing high water mark needs to be greater - * than the Rx threshold. Set hwm to PBA - max frame - * size in 16B units, capping it at PBA - 6KB. - */ - hwm = 64 * pba - adapter->max_frame_size / 16; - if (hwm < 64 * (pba - 6)) - hwm = 64 * (pba - 6); - reg = E1000_READ_REG(hw, E1000_FCRTC); - reg &= ~E1000_FCRTC_RTH_COAL_MASK; - reg |= ((hwm << E1000_FCRTC_RTH_COAL_SHIFT) - & E1000_FCRTC_RTH_COAL_MASK); - E1000_WRITE_REG(hw, E1000_FCRTC, reg); - - /* - * Set the DMA Coalescing Rx threshold to PBA - 2 * max - * frame size, capping it at PBA - 10KB. - */ - dmac_thr = pba - adapter->max_frame_size / 512; - if (dmac_thr < pba - 10) - dmac_thr = pba - 10; - reg = E1000_READ_REG(hw, E1000_DMACR); - reg &= ~E1000_DMACR_DMACTHR_MASK; - reg |= ((dmac_thr << E1000_DMACR_DMACTHR_SHIFT) - & E1000_DMACR_DMACTHR_MASK); - - /* transition to L0x or L1 if available..*/ - reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK); - - /* Check if status is 2.5Gb backplane connection - * before configuration of watchdog timer, which is - * in msec values in 12.8usec intervals - * watchdog timer= msec values in 32usec intervals - * for non 2.5Gb connection - */ - if (hw->mac.type == e1000_i354) { - status = E1000_READ_REG(hw, E1000_STATUS); - if ((status & E1000_STATUS_2P5_SKU) && - (!(status & E1000_STATUS_2P5_SKU_OVER))) - reg |= ((adapter->dmac * 5) >> 6); - else - reg |= ((adapter->dmac) >> 5); - } else { - reg |= ((adapter->dmac) >> 5); - } - - /* - * Disable BMC-to-OS Watchdog enable - * on devices that support OS-to-BMC - */ - if (hw->mac.type != e1000_i354) - reg &= ~E1000_DMACR_DC_BMC2OSW_EN; - E1000_WRITE_REG(hw, E1000_DMACR, reg); - - /* no lower threshold to disable coalescing(smart fifb)-UTRESH=0*/ - E1000_WRITE_REG(hw, E1000_DMCRTRH, 0); - - /* This sets the time to wait before requesting - * transition to low power state to number of usecs - * needed to receive 1 512 byte frame at gigabit - * line rate. On i350 device, time to make transition - * to Lx state is delayed by 4 usec with flush disable - * bit set to avoid losing mailbox interrupts - */ - reg = E1000_READ_REG(hw, E1000_DMCTLX); - if (hw->mac.type == e1000_i350) - reg |= IGB_DMCTLX_DCFLUSH_DIS; - - /* in 2.5Gb connection, TTLX unit is 0.4 usec - * which is 0x4*2 = 0xA. But delay is still 4 usec - */ - if (hw->mac.type == e1000_i354) { - status = E1000_READ_REG(hw, E1000_STATUS); - if ((status & E1000_STATUS_2P5_SKU) && - (!(status & E1000_STATUS_2P5_SKU_OVER))) - reg |= 0xA; - else - reg |= 0x4; - } else { - reg |= 0x4; - } - E1000_WRITE_REG(hw, E1000_DMCTLX, reg); - - /* free space in tx packet buffer to wake from DMA coal */ - E1000_WRITE_REG(hw, E1000_DMCTXTH, (IGB_MIN_TXPBSIZE - - (IGB_TX_BUF_4096 + adapter->max_frame_size)) >> 6); - - /* make low power state decision controlled by DMA coal */ - reg = E1000_READ_REG(hw, E1000_PCIEMISC); - reg &= ~E1000_PCIEMISC_LX_DECISION; - E1000_WRITE_REG(hw, E1000_PCIEMISC, reg); - } /* endif adapter->dmac is not disabled */ - } else if (hw->mac.type == e1000_82580) { - u32 reg = E1000_READ_REG(hw, E1000_PCIEMISC); - E1000_WRITE_REG(hw, E1000_PCIEMISC, - reg & ~E1000_PCIEMISC_LX_DECISION); - E1000_WRITE_REG(hw, E1000_DMACR, 0); - } -} - -#ifdef HAVE_I2C_SUPPORT -/* igb_read_i2c_byte - Reads 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @dev_addr: device address - * @data: value read - * - * Performs byte read operation over I2C interface at - * a specified device address. - */ -s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data) -{ - struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); - struct i2c_client *this_client = adapter->i2c_client; - s32 status; - u16 swfw_mask = 0; - - if (!this_client) - return E1000_ERR_I2C; - - swfw_mask = E1000_SWFW_PHY0_SM; - - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) - != E1000_SUCCESS) - return E1000_ERR_SWFW_SYNC; - - status = i2c_smbus_read_byte_data(this_client, byte_offset); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - - if (status < 0) - return E1000_ERR_I2C; - else { - *data = status; - return E1000_SUCCESS; - } -} - -/* igb_write_i2c_byte - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @dev_addr: device address - * @data: value to write - * - * Performs byte write operation over I2C interface at - * a specified device address. - */ -s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data) -{ - struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); - struct i2c_client *this_client = adapter->i2c_client; - s32 status; - u16 swfw_mask = E1000_SWFW_PHY0_SM; - - if (!this_client) - return E1000_ERR_I2C; - - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) - return E1000_ERR_SWFW_SYNC; - status = i2c_smbus_write_byte_data(this_client, byte_offset, data); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - - if (status) - return E1000_ERR_I2C; - else - return E1000_SUCCESS; -} -#endif /* HAVE_I2C_SUPPORT */ -/* igb_main.c */ - - -/** - * igb_probe - Device Initialization Routine - * @pdev: PCI device information struct - * @ent: entry in igb_pci_tbl - * - * Returns 0 on success, negative on failure - * - * igb_probe initializes an adapter identified by a pci_dev structure. - * The OS initialization, configuring of the adapter private structure, - * and a hardware reset occur. - **/ -int igb_kni_probe(struct pci_dev *pdev, - struct net_device **lad_dev) -{ - struct net_device *netdev; - struct igb_adapter *adapter; - struct e1000_hw *hw; - u16 eeprom_data = 0; - u8 pba_str[E1000_PBANUM_LENGTH]; - s32 ret_val; - static int global_quad_port_a; /* global quad port a indication */ - int i, err, pci_using_dac = 0; - static int cards_found; - - err = pci_enable_device_mem(pdev); - if (err) - return err; - -#ifdef NO_KNI - pci_using_dac = 0; - err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); - if (!err) { - err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)); - if (!err) - pci_using_dac = 1; - } else { - err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); - if (err) { - err = dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); - if (err) { - IGB_ERR("No usable DMA configuration, " - "aborting\n"); - goto err_dma; - } - } - } - -#ifndef HAVE_ASPM_QUIRKS - /* 82575 requires that the pci-e link partner disable the L0s state */ - switch (pdev->device) { - case E1000_DEV_ID_82575EB_COPPER: - case E1000_DEV_ID_82575EB_FIBER_SERDES: - case E1000_DEV_ID_82575GB_QUAD_COPPER: - pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S); - default: - break; - } - -#endif /* HAVE_ASPM_QUIRKS */ - err = pci_request_selected_regions(pdev, - pci_select_bars(pdev, - IORESOURCE_MEM), - igb_driver_name); - if (err) - goto err_pci_reg; - - pci_enable_pcie_error_reporting(pdev); - - pci_set_master(pdev); - - err = -ENOMEM; -#endif /* NO_KNI */ -#ifdef HAVE_TX_MQ - netdev = alloc_etherdev_mq(sizeof(struct igb_adapter), - IGB_MAX_TX_QUEUES); -#else - netdev = alloc_etherdev(sizeof(struct igb_adapter)); -#endif /* HAVE_TX_MQ */ - if (!netdev) - goto err_alloc_etherdev; - - SET_MODULE_OWNER(netdev); - SET_NETDEV_DEV(netdev, &pdev->dev); - - //pci_set_drvdata(pdev, netdev); - adapter = netdev_priv(netdev); - adapter->netdev = netdev; - adapter->pdev = pdev; - hw = &adapter->hw; - hw->back = adapter; - adapter->port_num = hw->bus.func; - adapter->msg_enable = (1 << debug) - 1; - -#ifdef HAVE_PCI_ERS - err = pci_save_state(pdev); - if (err) - goto err_ioremap; -#endif - err = -EIO; - hw->hw_addr = ioremap(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - if (!hw->hw_addr) - goto err_ioremap; - -#ifdef HAVE_NET_DEVICE_OPS - netdev->netdev_ops = &igb_netdev_ops; -#else /* HAVE_NET_DEVICE_OPS */ - netdev->open = &igb_open; - netdev->stop = &igb_close; - netdev->get_stats = &igb_get_stats; -#ifdef HAVE_SET_RX_MODE - netdev->set_rx_mode = &igb_set_rx_mode; -#endif - netdev->set_multicast_list = &igb_set_rx_mode; - netdev->set_mac_address = &igb_set_mac; - netdev->change_mtu = &igb_change_mtu; - netdev->do_ioctl = &igb_ioctl; -#ifdef HAVE_TX_TIMEOUT - netdev->tx_timeout = &igb_tx_timeout; -#endif - netdev->vlan_rx_register = igb_vlan_mode; - netdev->vlan_rx_add_vid = igb_vlan_rx_add_vid; - netdev->vlan_rx_kill_vid = igb_vlan_rx_kill_vid; -#ifdef CONFIG_NET_POLL_CONTROLLER - netdev->poll_controller = igb_netpoll; -#endif - netdev->hard_start_xmit = &igb_xmit_frame; -#endif /* HAVE_NET_DEVICE_OPS */ - igb_set_ethtool_ops(netdev); -#ifdef HAVE_TX_TIMEOUT - netdev->watchdog_timeo = 5 * HZ; -#endif - - strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); - - adapter->bd_number = cards_found; - - /* setup the private structure */ - err = igb_sw_init(adapter); - if (err) - goto err_sw_init; - - e1000_get_bus_info(hw); - - hw->phy.autoneg_wait_to_complete = FALSE; - hw->mac.adaptive_ifs = FALSE; - - /* Copper options */ - if (hw->phy.media_type == e1000_media_type_copper) { - hw->phy.mdix = AUTO_ALL_MODES; - hw->phy.disable_polarity_correction = FALSE; - hw->phy.ms_type = e1000_ms_hw_default; - } - - if (e1000_check_reset_block(hw)) - dev_info(pci_dev_to_dev(pdev), - "PHY reset is blocked due to SOL/IDER session.\n"); - - /* - * features is initialized to 0 in allocation, it might have bits - * set by igb_sw_init so we should use an or instead of an - * assignment. - */ - netdev->features |= NETIF_F_SG | - NETIF_F_IP_CSUM | -#ifdef NETIF_F_IPV6_CSUM - NETIF_F_IPV6_CSUM | -#endif -#ifdef NETIF_F_TSO - NETIF_F_TSO | -#ifdef NETIF_F_TSO6 - NETIF_F_TSO6 | -#endif -#endif /* NETIF_F_TSO */ -#ifdef NETIF_F_RXHASH - NETIF_F_RXHASH | -#endif - NETIF_F_RXCSUM | -#ifdef NETIF_F_HW_VLAN_CTAG_RX - NETIF_F_HW_VLAN_CTAG_RX | - NETIF_F_HW_VLAN_CTAG_TX; -#else - NETIF_F_HW_VLAN_RX | - NETIF_F_HW_VLAN_TX; -#endif - - if (hw->mac.type >= e1000_82576) - netdev->features |= NETIF_F_SCTP_CSUM; - -#ifdef HAVE_NDO_SET_FEATURES - /* copy netdev features into list of user selectable features */ - netdev->hw_features |= netdev->features; -#ifndef IGB_NO_LRO - - /* give us the option of enabling LRO later */ - netdev->hw_features |= NETIF_F_LRO; -#endif -#else -#ifdef NETIF_F_GRO - - /* this is only needed on kernels prior to 2.6.39 */ - netdev->features |= NETIF_F_GRO; -#endif -#endif - - /* set this bit last since it cannot be part of hw_features */ -#ifdef NETIF_F_HW_VLAN_CTAG_FILTER - netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; -#else - netdev->features |= NETIF_F_HW_VLAN_FILTER; -#endif - -#ifdef HAVE_NETDEV_VLAN_FEATURES - netdev->vlan_features |= NETIF_F_TSO | - NETIF_F_TSO6 | - NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM | - NETIF_F_SG; - -#endif - if (pci_using_dac) - netdev->features |= NETIF_F_HIGHDMA; - -#ifdef NO_KNI - adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw); -#ifdef DEBUG - if (adapter->dmac != IGB_DMAC_DISABLE) - printk("%s: DMA Coalescing is enabled..\n", netdev->name); -#endif - - /* before reading the NVM, reset the controller to put the device in a - * known good starting state */ - e1000_reset_hw(hw); -#endif /* NO_KNI */ - - /* make sure the NVM is good */ - if (e1000_validate_nvm_checksum(hw) < 0) { - dev_err(pci_dev_to_dev(pdev), "The NVM Checksum Is Not" - " Valid\n"); - err = -EIO; - goto err_eeprom; - } - - /* copy the MAC address out of the NVM */ - if (e1000_read_mac_addr(hw)) - dev_err(pci_dev_to_dev(pdev), "NVM Read Error\n"); - memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); -#ifdef ETHTOOL_GPERMADDR - memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); - - if (!is_valid_ether_addr(netdev->perm_addr)) { -#else - if (!is_valid_ether_addr(netdev->dev_addr)) { -#endif - dev_err(pci_dev_to_dev(pdev), "Invalid MAC Address\n"); - err = -EIO; - goto err_eeprom; - } - - memcpy(&adapter->mac_table[0].addr, hw->mac.addr, netdev->addr_len); - adapter->mac_table[0].queue = adapter->vfs_allocated_count; - adapter->mac_table[0].state = (IGB_MAC_STATE_DEFAULT | IGB_MAC_STATE_IN_USE); - igb_rar_set(adapter, 0); - - /* get firmware version for ethtool -i */ - igb_set_fw_version(adapter); - - /* Check if Media Autosense is enabled */ - if (hw->mac.type == e1000_82580) - igb_init_mas(adapter); - -#ifdef NO_KNI -#ifdef HAVE_TIMER_SETUP - timer_setup(&adapter->watchdog_timer, &igb_watchdog, 0); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - timer_setup(&adapter->dma_err_timer, &igb_dma_err_timer, 0); - timer_setup(&adapter->phy_info_timer, &igb_update_phy_info, 0); -#else - setup_timer(&adapter->watchdog_timer, &igb_watchdog, - (unsigned long) adapter); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - setup_timer(&adapter->dma_err_timer, &igb_dma_err_timer, - (unsigned long) adapter); - setup_timer(&adapter->phy_info_timer, &igb_update_phy_info, - (unsigned long) adapter); -#endif - - INIT_WORK(&adapter->reset_task, igb_reset_task); - INIT_WORK(&adapter->watchdog_task, igb_watchdog_task); - if (adapter->flags & IGB_FLAG_DETECT_BAD_DMA) - INIT_WORK(&adapter->dma_err_task, igb_dma_err_task); -#endif - - /* Initialize link properties that are user-changeable */ - adapter->fc_autoneg = true; - hw->mac.autoneg = true; - hw->phy.autoneg_advertised = 0x2f; - - hw->fc.requested_mode = e1000_fc_default; - hw->fc.current_mode = e1000_fc_default; - - e1000_validate_mdi_setting(hw); - - /* By default, support wake on port A */ - if (hw->bus.func == 0) - adapter->flags |= IGB_FLAG_WOL_SUPPORTED; - - /* Check the NVM for wake support for non-port A ports */ - if (hw->mac.type >= e1000_82580) - hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + - NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, - &eeprom_data); - else if (hw->bus.func == 1) - e1000_read_nvm(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data); - - if (eeprom_data & IGB_EEPROM_APME) - adapter->flags |= IGB_FLAG_WOL_SUPPORTED; - - /* now that we have the eeprom settings, apply the special cases where - * the eeprom may be wrong or the board simply won't support wake on - * lan on a particular port */ - switch (pdev->device) { - case E1000_DEV_ID_82575GB_QUAD_COPPER: - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - break; - case E1000_DEV_ID_82575EB_FIBER_SERDES: - case E1000_DEV_ID_82576_FIBER: - case E1000_DEV_ID_82576_SERDES: - /* Wake events only supported on port A for dual fiber - * regardless of eeprom setting */ - if (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_FUNC_1) - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - break; - case E1000_DEV_ID_82576_QUAD_COPPER: - case E1000_DEV_ID_82576_QUAD_COPPER_ET2: - /* if quad port adapter, disable WoL on all but port A */ - if (global_quad_port_a != 0) - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - else - adapter->flags |= IGB_FLAG_QUAD_PORT_A; - /* Reset for multiple quad port adapters */ - if (++global_quad_port_a == 4) - global_quad_port_a = 0; - break; - default: - /* If the device can't wake, don't set software support */ - if (!device_can_wakeup(&adapter->pdev->dev)) - adapter->flags &= ~IGB_FLAG_WOL_SUPPORTED; - break; - } - - /* initialize the wol settings based on the eeprom settings */ - if (adapter->flags & IGB_FLAG_WOL_SUPPORTED) - adapter->wol |= E1000_WUFC_MAG; - - /* Some vendors want WoL disabled by default, but still supported */ - if ((hw->mac.type == e1000_i350) && - (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)) { - adapter->flags |= IGB_FLAG_WOL_SUPPORTED; - adapter->wol = 0; - } - -#ifdef NO_KNI - device_set_wakeup_enable(pci_dev_to_dev(adapter->pdev), - adapter->flags & IGB_FLAG_WOL_SUPPORTED); - - /* reset the hardware with the new settings */ - igb_reset(adapter); - adapter->devrc = 0; - -#ifdef HAVE_I2C_SUPPORT - /* Init the I2C interface */ - err = igb_init_i2c(adapter); - if (err) { - dev_err(&pdev->dev, "failed to init i2c interface\n"); - goto err_eeprom; - } -#endif /* HAVE_I2C_SUPPORT */ - - /* let the f/w know that the h/w is now under the control of the - * driver. */ - igb_get_hw_control(adapter); - - strncpy(netdev->name, "eth%d", IFNAMSIZ); - err = register_netdev(netdev); - if (err) - goto err_register; - -#ifdef CONFIG_IGB_VMDQ_NETDEV - err = igb_init_vmdq_netdevs(adapter); - if (err) - goto err_register; -#endif - /* carrier off reporting is important to ethtool even BEFORE open */ - netif_carrier_off(netdev); - -#ifdef IGB_DCA - if (dca_add_requester(&pdev->dev) == E1000_SUCCESS) { - adapter->flags |= IGB_FLAG_DCA_ENABLED; - dev_info(pci_dev_to_dev(pdev), "DCA enabled\n"); - igb_setup_dca(adapter); - } - -#endif -#ifdef HAVE_PTP_1588_CLOCK - /* do hw tstamp init after resetting */ - igb_ptp_init(adapter); -#endif /* HAVE_PTP_1588_CLOCK */ - -#endif /* NO_KNI */ - dev_info(pci_dev_to_dev(pdev), "Intel(R) Gigabit Ethernet Network Connection\n"); - /* print bus type/speed/width info */ - dev_info(pci_dev_to_dev(pdev), "%s: (PCIe:%s:%s) ", - netdev->name, - ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5GT/s" : - (hw->bus.speed == e1000_bus_speed_5000) ? "5.0GT/s" : - (hw->mac.type == e1000_i354) ? "integrated" : - "unknown"), - ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : - (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" : - (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" : - (hw->mac.type == e1000_i354) ? "integrated" : - "unknown")); - dev_info(pci_dev_to_dev(pdev), "%s: MAC: ", netdev->name); - for (i = 0; i < 6; i++) - printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':'); - - ret_val = e1000_read_pba_string(hw, pba_str, E1000_PBANUM_LENGTH); - if (ret_val) - strncpy(pba_str, "Unknown", sizeof(pba_str) - 1); - dev_info(pci_dev_to_dev(pdev), "%s: PBA No: %s\n", netdev->name, - pba_str); - - - /* Initialize the thermal sensor on i350 devices. */ - if (hw->mac.type == e1000_i350) { - if (hw->bus.func == 0) { - u16 ets_word; - - /* - * Read the NVM to determine if this i350 device - * supports an external thermal sensor. - */ - e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_word); - if (ets_word != 0x0000 && ets_word != 0xFFFF) - adapter->ets = true; - else - adapter->ets = false; - } -#ifdef NO_KNI -#ifdef IGB_HWMON - - igb_sysfs_init(adapter); -#else -#ifdef IGB_PROCFS - - igb_procfs_init(adapter); -#endif /* IGB_PROCFS */ -#endif /* IGB_HWMON */ -#endif /* NO_KNI */ - } else { - adapter->ets = false; - } - - if (hw->phy.media_type == e1000_media_type_copper) { - switch (hw->mac.type) { - case e1000_i350: - case e1000_i210: - case e1000_i211: - /* Enable EEE for internal copper PHY devices */ - err = e1000_set_eee_i350(hw); - if ((!err) && - (adapter->flags & IGB_FLAG_EEE)) - adapter->eee_advert = - MDIO_EEE_100TX | MDIO_EEE_1000T; - break; - case e1000_i354: - if ((E1000_READ_REG(hw, E1000_CTRL_EXT)) & - (E1000_CTRL_EXT_LINK_MODE_SGMII)) { - err = e1000_set_eee_i354(hw); - if ((!err) && - (adapter->flags & IGB_FLAG_EEE)) - adapter->eee_advert = - MDIO_EEE_100TX | MDIO_EEE_1000T; - } - break; - default: - break; - } - } - - /* send driver version info to firmware */ - if (hw->mac.type >= e1000_i350) - igb_init_fw(adapter); - -#ifndef IGB_NO_LRO - if (netdev->features & NETIF_F_LRO) - dev_info(pci_dev_to_dev(pdev), "Internal LRO is enabled \n"); - else - dev_info(pci_dev_to_dev(pdev), "LRO is disabled \n"); -#endif - dev_info(pci_dev_to_dev(pdev), - "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n", - adapter->msix_entries ? "MSI-X" : - (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy", - adapter->num_rx_queues, adapter->num_tx_queues); - - cards_found++; - *lad_dev = netdev; - - pm_runtime_put_noidle(&pdev->dev); - return 0; - -//err_register: -// igb_release_hw_control(adapter); -#ifdef HAVE_I2C_SUPPORT - memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap)); -#endif /* HAVE_I2C_SUPPORT */ -err_eeprom: -// if (!e1000_check_reset_block(hw)) -// e1000_phy_hw_reset(hw); - - if (hw->flash_address) - iounmap(hw->flash_address); -err_sw_init: -// igb_clear_interrupt_scheme(adapter); -// igb_reset_sriov_capability(adapter); - iounmap(hw->hw_addr); -err_ioremap: - free_netdev(netdev); -err_alloc_etherdev: -// pci_release_selected_regions(pdev, -// pci_select_bars(pdev, IORESOURCE_MEM)); -//err_pci_reg: -//err_dma: - pci_disable_device(pdev); - return err; -} - - -void igb_kni_remove(struct pci_dev *pdev) -{ - pci_disable_device(pdev); -} |