diff options
Diffstat (limited to 'lib/librte_ethdev/rte_tm.h')
| -rw-r--r-- | lib/librte_ethdev/rte_tm.h | 1965 |
1 files changed, 1965 insertions, 0 deletions
diff --git a/lib/librte_ethdev/rte_tm.h b/lib/librte_ethdev/rte_tm.h new file mode 100644 index 00000000..955f02ff --- /dev/null +++ b/lib/librte_ethdev/rte_tm.h @@ -0,0 +1,1965 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2017 Intel Corporation. + * Copyright(c) 2017 Cavium. + * Copyright(c) 2017 NXP. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __INCLUDE_RTE_TM_H__ +#define __INCLUDE_RTE_TM_H__ + +/** + * @file + * RTE Generic Traffic Manager API + * + * This interface provides the ability to configure the traffic manager in a + * generic way. It includes features such as: hierarchical scheduling, + * traffic shaping, congestion management, packet marking, etc. + * + * @warning + * @b EXPERIMENTAL: this API may change without prior notice + */ + +#include <stdint.h> + +#include <rte_common.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Ethernet framing overhead. + * + * Overhead fields per Ethernet frame: + * 1. Preamble: 7 bytes; + * 2. Start of Frame Delimiter (SFD): 1 byte; + * 3. Inter-Frame Gap (IFG): 12 bytes. + * + * One of the typical values for the *pkt_length_adjust* field of the shaper + * profile. + * + * @see struct rte_tm_shaper_params + */ +#define RTE_TM_ETH_FRAMING_OVERHEAD 20 + +/** + * Ethernet framing overhead including the Frame Check Sequence (FCS) field. + * Useful when FCS is generated and added at the end of the Ethernet frame on + * TX side without any SW intervention. + * + * One of the typical values for the pkt_length_adjust field of the shaper + * profile. + * + * @see struct rte_tm_shaper_params + */ +#define RTE_TM_ETH_FRAMING_OVERHEAD_FCS 24 + +/** + * Invalid WRED profile ID. + * + * @see struct rte_tm_node_params + * @see rte_tm_node_add() + * @see rte_tm_node_wred_context_update() + */ +#define RTE_TM_WRED_PROFILE_ID_NONE UINT32_MAX + +/** + *Invalid shaper profile ID. + * + * @see struct rte_tm_node_params + * @see rte_tm_node_add() + * @see rte_tm_node_shaper_update() + */ +#define RTE_TM_SHAPER_PROFILE_ID_NONE UINT32_MAX + +/** + * Node ID for the parent of the root node. + * + * @see rte_tm_node_add() + */ +#define RTE_TM_NODE_ID_NULL UINT32_MAX + +/** + * Node level ID used to disable level ID checking. + * + * @see rte_tm_node_add() + */ +#define RTE_TM_NODE_LEVEL_ID_ANY UINT32_MAX + +/** + * Color + */ +enum rte_tm_color { + RTE_TM_GREEN = 0, /**< Green */ + RTE_TM_YELLOW, /**< Yellow */ + RTE_TM_RED, /**< Red */ + RTE_TM_COLORS /**< Number of colors */ +}; + +/** + * Node statistics counter type + */ +enum rte_tm_stats_type { + /** Number of packets scheduled from current node. */ + RTE_TM_STATS_N_PKTS = 1 << 0, + + /** Number of bytes scheduled from current node. */ + RTE_TM_STATS_N_BYTES = 1 << 1, + + /** Number of green packets dropped by current leaf node. */ + RTE_TM_STATS_N_PKTS_GREEN_DROPPED = 1 << 2, + + /** Number of yellow packets dropped by current leaf node. */ + RTE_TM_STATS_N_PKTS_YELLOW_DROPPED = 1 << 3, + + /** Number of red packets dropped by current leaf node. */ + RTE_TM_STATS_N_PKTS_RED_DROPPED = 1 << 4, + + /** Number of green bytes dropped by current leaf node. */ + RTE_TM_STATS_N_BYTES_GREEN_DROPPED = 1 << 5, + + /** Number of yellow bytes dropped by current leaf node. */ + RTE_TM_STATS_N_BYTES_YELLOW_DROPPED = 1 << 6, + + /** Number of red bytes dropped by current leaf node. */ + RTE_TM_STATS_N_BYTES_RED_DROPPED = 1 << 7, + + /** Number of packets currently waiting in the packet queue of current + * leaf node. + */ + RTE_TM_STATS_N_PKTS_QUEUED = 1 << 8, + + /** Number of bytes currently waiting in the packet queue of current + * leaf node. + */ + RTE_TM_STATS_N_BYTES_QUEUED = 1 << 9, +}; + +/** + * Node statistics counters + */ +struct rte_tm_node_stats { + /** Number of packets scheduled from current node. */ + uint64_t n_pkts; + + /** Number of bytes scheduled from current node. */ + uint64_t n_bytes; + + /** Statistics counters for leaf nodes only. */ + struct { + /** Number of packets dropped by current leaf node per each + * color. + */ + uint64_t n_pkts_dropped[RTE_TM_COLORS]; + + /** Number of bytes dropped by current leaf node per each + * color. + */ + uint64_t n_bytes_dropped[RTE_TM_COLORS]; + + /** Number of packets currently waiting in the packet queue of + * current leaf node. + */ + uint64_t n_pkts_queued; + + /** Number of bytes currently waiting in the packet queue of + * current leaf node. + */ + uint64_t n_bytes_queued; + } leaf; +}; + +/** + * Traffic manager dynamic updates + */ +enum rte_tm_dynamic_update_type { + /** Dynamic parent node update. The new parent node is located on same + * hierarchy level as the former parent node. Consequently, the node + * whose parent is changed preserves its hierarchy level. + */ + RTE_TM_UPDATE_NODE_PARENT_KEEP_LEVEL = 1 << 0, + + /** Dynamic parent node update. The new parent node is located on + * different hierarchy level than the former parent node. Consequently, + * the node whose parent is changed also changes its hierarchy level. + */ + RTE_TM_UPDATE_NODE_PARENT_CHANGE_LEVEL = 1 << 1, + + /** Dynamic node add/delete. */ + RTE_TM_UPDATE_NODE_ADD_DELETE = 1 << 2, + + /** Suspend/resume nodes. */ + RTE_TM_UPDATE_NODE_SUSPEND_RESUME = 1 << 3, + + /** Dynamic switch between byte-based and packet-based WFQ weights. */ + RTE_TM_UPDATE_NODE_WFQ_WEIGHT_MODE = 1 << 4, + + /** Dynamic update on number of SP priorities. */ + RTE_TM_UPDATE_NODE_N_SP_PRIORITIES = 1 << 5, + + /** Dynamic update of congestion management mode for leaf nodes. */ + RTE_TM_UPDATE_NODE_CMAN = 1 << 6, + + /** Dynamic update of the set of enabled stats counter types. */ + RTE_TM_UPDATE_NODE_STATS = 1 << 7, +}; + +/** + * Traffic manager capabilities + */ +struct rte_tm_capabilities { + /** Maximum number of nodes. */ + uint32_t n_nodes_max; + + /** Maximum number of levels (i.e. number of nodes connecting the root + * node with any leaf node, including the root and the leaf). + */ + uint32_t n_levels_max; + + /** When non-zero, this flag indicates that all the non-leaf nodes + * (with the exception of the root node) have identical capability set. + */ + int non_leaf_nodes_identical; + + /** When non-zero, this flag indicates that all the leaf nodes have + * identical capability set. + */ + int leaf_nodes_identical; + + /** Maximum number of shapers, either private or shared. In case the + * implementation does not share any resources between private and + * shared shapers, it is typically equal to the sum of + * *shaper_private_n_max* and *shaper_shared_n_max*. The + * value of zero indicates that traffic shaping is not supported. + */ + uint32_t shaper_n_max; + + /** Maximum number of private shapers. Indicates the maximum number of + * nodes that can concurrently have their private shaper enabled. The + * value of zero indicates that private shapers are not supported. + */ + uint32_t shaper_private_n_max; + + /** Maximum number of private shapers that support dual rate shaping. + * Indicates the maximum number of nodes that can concurrently have + * their private shaper enabled with dual rate support. Only valid when + * private shapers are supported. The value of zero indicates that dual + * rate shaping is not available for private shapers. The maximum value + * is *shaper_private_n_max*. + */ + int shaper_private_dual_rate_n_max; + + /** Minimum committed/peak rate (bytes per second) for any private + * shaper. Valid only when private shapers are supported. + */ + uint64_t shaper_private_rate_min; + + /** Maximum committed/peak rate (bytes per second) for any private + * shaper. Valid only when private shapers are supported. + */ + uint64_t shaper_private_rate_max; + + /** Maximum number of shared shapers. The value of zero indicates that + * shared shapers are not supported. + */ + uint32_t shaper_shared_n_max; + + /** Maximum number of nodes that can share the same shared shaper. + * Only valid when shared shapers are supported. + */ + uint32_t shaper_shared_n_nodes_per_shaper_max; + + /** Maximum number of shared shapers a node can be part of. This + * parameter indicates that there is at least one node that can be + * configured with this many shared shapers, which might not be true for + * all the nodes. Only valid when shared shapers are supported, in which + * case it ranges from 1 to *shaper_shared_n_max*. + */ + uint32_t shaper_shared_n_shapers_per_node_max; + + /** Maximum number of shared shapers that can be configured with dual + * rate shaping. The value of zero indicates that dual rate shaping + * support is not available for shared shapers. + */ + uint32_t shaper_shared_dual_rate_n_max; + + /** Minimum committed/peak rate (bytes per second) for any shared + * shaper. Only valid when shared shapers are supported. + */ + uint64_t shaper_shared_rate_min; + + /** Maximum committed/peak rate (bytes per second) for any shared + * shaper. Only valid when shared shapers are supported. + */ + uint64_t shaper_shared_rate_max; + + /** Minimum value allowed for packet length adjustment for any private + * or shared shaper. + */ + int shaper_pkt_length_adjust_min; + + /** Maximum value allowed for packet length adjustment for any private + * or shared shaper. + */ + int shaper_pkt_length_adjust_max; + + /** Maximum number of children nodes. This parameter indicates that + * there is at least one non-leaf node that can be configured with this + * many children nodes, which might not be true for all the non-leaf + * nodes. + */ + uint32_t sched_n_children_max; + + /** Maximum number of supported priority levels. This parameter + * indicates that there is at least one non-leaf node that can be + * configured with this many priority levels for managing its children + * nodes, which might not be true for all the non-leaf nodes. The value + * of zero is invalid. The value of 1 indicates that only priority 0 is + * supported, which essentially means that Strict Priority (SP) + * algorithm is not supported. + */ + uint32_t sched_sp_n_priorities_max; + + /** Maximum number of sibling nodes that can have the same priority at + * any given time, i.e. maximum size of the WFQ sibling node group. This + * parameter indicates there is at least one non-leaf node that meets + * this condition, which might not be true for all the non-leaf nodes. + * The value of zero is invalid. The value of 1 indicates that WFQ + * algorithm is not supported. The maximum value is + * *sched_n_children_max*. + */ + uint32_t sched_wfq_n_children_per_group_max; + + /** Maximum number of priority levels that can have more than one child + * node at any given time, i.e. maximum number of WFQ sibling node + * groups that have two or more members. This parameter indicates there + * is at least one non-leaf node that meets this condition, which might + * not be true for all the non-leaf nodes. The value of zero states that + * WFQ algorithm is not supported. The value of 1 indicates that + * (*sched_sp_n_priorities_max* - 1) priority levels have at most one + * child node, so there can be only one priority level with two or + * more sibling nodes making up a WFQ group. The maximum value is: + * min(floor(*sched_n_children_max* / 2), *sched_sp_n_priorities_max*). + */ + uint32_t sched_wfq_n_groups_max; + + /** Maximum WFQ weight. The value of 1 indicates that all sibling nodes + * with same priority have the same WFQ weight, so WFQ is reduced to FQ. + */ + uint32_t sched_wfq_weight_max; + + /** WRED packet mode support. When non-zero, this parameter indicates + * that there is atleast one leaf node that supports the WRED packet + * mode, which might not be true for all the leaf nodes. In packet + * mode, the WRED thresholds specify the queue length in packets, as + * opposed to bytes. + */ + int cman_wred_packet_mode_supported; + + /** WRED byte mode support. When non-zero, this parameter indicates that + * there is atleast one leaf node that supports the WRED byte mode, + * which might not be true for all the leaf nodes. In byte mode, the + * WRED thresholds specify the queue length in bytes, as opposed to + * packets. + */ + int cman_wred_byte_mode_supported; + + /** Head drop algorithm support. When non-zero, this parameter + * indicates that there is at least one leaf node that supports the head + * drop algorithm, which might not be true for all the leaf nodes. + */ + int cman_head_drop_supported; + + /** Maximum number of WRED contexts, either private or shared. In case + * the implementation does not share any resources between private and + * shared WRED contexts, it is typically equal to the sum of + * *cman_wred_context_private_n_max* and + * *cman_wred_context_shared_n_max*. The value of zero indicates that + * WRED is not supported. + */ + uint32_t cman_wred_context_n_max; + + /** Maximum number of private WRED contexts. Indicates the maximum + * number of leaf nodes that can concurrently have their private WRED + * context enabled. The value of zero indicates that private WRED + * contexts are not supported. + */ + uint32_t cman_wred_context_private_n_max; + + /** Maximum number of shared WRED contexts. The value of zero + * indicates that shared WRED contexts are not supported. + */ + uint32_t cman_wred_context_shared_n_max; + + /** Maximum number of leaf nodes that can share the same WRED context. + * Only valid when shared WRED contexts are supported. + */ + uint32_t cman_wred_context_shared_n_nodes_per_context_max; + + /** Maximum number of shared WRED contexts a leaf node can be part of. + * This parameter indicates that there is at least one leaf node that + * can be configured with this many shared WRED contexts, which might + * not be true for all the leaf nodes. Only valid when shared WRED + * contexts are supported, in which case it ranges from 1 to + * *cman_wred_context_shared_n_max*. + */ + uint32_t cman_wred_context_shared_n_contexts_per_node_max; + + /** Support for VLAN DEI packet marking (per color). */ + int mark_vlan_dei_supported[RTE_TM_COLORS]; + + /** Support for IPv4/IPv6 ECN marking of TCP packets (per color). */ + int mark_ip_ecn_tcp_supported[RTE_TM_COLORS]; + + /** Support for IPv4/IPv6 ECN marking of SCTP packets (per color). */ + int mark_ip_ecn_sctp_supported[RTE_TM_COLORS]; + + /** Support for IPv4/IPv6 DSCP packet marking (per color). */ + int mark_ip_dscp_supported[RTE_TM_COLORS]; + + /** Set of supported dynamic update operations. + * @see enum rte_tm_dynamic_update_type + */ + uint64_t dynamic_update_mask; + + /** Set of supported statistics counter types. + * @see enum rte_tm_stats_type + */ + uint64_t stats_mask; +}; + +/** + * Traffic manager level capabilities + */ +struct rte_tm_level_capabilities { + /** Maximum number of nodes for the current hierarchy level. */ + uint32_t n_nodes_max; + + /** Maximum number of non-leaf nodes for the current hierarchy level. + * The value of 0 indicates that current level only supports leaf + * nodes. The maximum value is *n_nodes_max*. + */ + uint32_t n_nodes_nonleaf_max; + + /** Maximum number of leaf nodes for the current hierarchy level. The + * value of 0 indicates that current level only supports non-leaf + * nodes. The maximum value is *n_nodes_max*. + */ + uint32_t n_nodes_leaf_max; + + /** When non-zero, this flag indicates that all the non-leaf nodes on + * this level have identical capability set. Valid only when + * *n_nodes_nonleaf_max* is non-zero. + */ + int non_leaf_nodes_identical; + + /** When non-zero, this flag indicates that all the leaf nodes on this + * level have identical capability set. Valid only when + * *n_nodes_leaf_max* is non-zero. + */ + int leaf_nodes_identical; + + RTE_STD_C11 + union { + /** Items valid only for the non-leaf nodes on this level. */ + struct { + /** Private shaper support. When non-zero, it indicates + * there is at least one non-leaf node on this level + * with private shaper support, which may not be the + * case for all the non-leaf nodes on this level. + */ + int shaper_private_supported; + + /** Dual rate support for private shaper. Valid only + * when private shaper is supported for the non-leaf + * nodes on the current level. When non-zero, it + * indicates there is at least one non-leaf node on this + * level with dual rate private shaper support, which + * may not be the case for all the non-leaf nodes on + * this level. + */ + int shaper_private_dual_rate_supported; + + /** Minimum committed/peak rate (bytes per second) for + * private shapers of the non-leaf nodes of this level. + * Valid only when private shaper is supported on this + * level. + */ + uint64_t shaper_private_rate_min; + + /** Maximum committed/peak rate (bytes per second) for + * private shapers of the non-leaf nodes on this level. + * Valid only when private shaper is supported on this + * level. + */ + uint64_t shaper_private_rate_max; + + /** Maximum number of shared shapers that any non-leaf + * node on this level can be part of. The value of zero + * indicates that shared shapers are not supported by + * the non-leaf nodes on this level. When non-zero, it + * indicates there is at least one non-leaf node on this + * level that meets this condition, which may not be the + * case for all the non-leaf nodes on this level. + */ + uint32_t shaper_shared_n_max; + + /** Maximum number of children nodes. This parameter + * indicates that there is at least one non-leaf node on + * this level that can be configured with this many + * children nodes, which might not be true for all the + * non-leaf nodes on this level. + */ + uint32_t sched_n_children_max; + + /** Maximum number of supported priority levels. This + * parameter indicates that there is at least one + * non-leaf node on this level that can be configured + * with this many priority levels for managing its + * children nodes, which might not be true for all the + * non-leaf nodes on this level. The value of zero is + * invalid. The value of 1 indicates that only priority + * 0 is supported, which essentially means that Strict + * Priority (SP) algorithm is not supported on this + * level. + */ + uint32_t sched_sp_n_priorities_max; + + /** Maximum number of sibling nodes that can have the + * same priority at any given time, i.e. maximum size of + * the WFQ sibling node group. This parameter indicates + * there is at least one non-leaf node on this level + * that meets this condition, which may not be true for + * all the non-leaf nodes on this level. The value of + * zero is invalid. The value of 1 indicates that WFQ + * algorithm is not supported on this level. The maximum + * value is *sched_n_children_max*. + */ + uint32_t sched_wfq_n_children_per_group_max; + + /** Maximum number of priority levels that can have + * more than one child node at any given time, i.e. + * maximum number of WFQ sibling node groups that + * have two or more members. This parameter indicates + * there is at least one non-leaf node on this level + * that meets this condition, which might not be true + * for all the non-leaf nodes. The value of zero states + * that WFQ algorithm is not supported on this level. + * The value of 1 indicates that + * (*sched_sp_n_priorities_max* - 1) priority levels on + * this level have at most one child node, so there can + * be only one priority level with two or more sibling + * nodes making up a WFQ group on this level. The + * maximum value is: + * min(floor(*sched_n_children_max* / 2), + * *sched_sp_n_priorities_max*). + */ + uint32_t sched_wfq_n_groups_max; + + /** Maximum WFQ weight. The value of 1 indicates that + * all sibling nodes on this level with same priority + * have the same WFQ weight, so on this level WFQ is + * reduced to FQ. + */ + uint32_t sched_wfq_weight_max; + + /** Mask of statistics counter types supported by the + * non-leaf nodes on this level. Every supported + * statistics counter type is supported by at least one + * non-leaf node on this level, which may not be true + * for all the non-leaf nodes on this level. + * @see enum rte_tm_stats_type + */ + uint64_t stats_mask; + } nonleaf; + + /** Items valid only for the leaf nodes on this level. */ + struct { + /** Private shaper support. When non-zero, it indicates + * there is at least one leaf node on this level with + * private shaper support, which may not be the case for + * all the leaf nodes on this level. + */ + int shaper_private_supported; + + /** Dual rate support for private shaper. Valid only + * when private shaper is supported for the leaf nodes + * on this level. When non-zero, it indicates there is + * at least one leaf node on this level with dual rate + * private shaper support, which may not be the case for + * all the leaf nodes on this level. + */ + int shaper_private_dual_rate_supported; + + /** Minimum committed/peak rate (bytes per second) for + * private shapers of the leaf nodes of this level. + * Valid only when private shaper is supported for the + * leaf nodes on this level. + */ + uint64_t shaper_private_rate_min; + + /** Maximum committed/peak rate (bytes per second) for + * private shapers of the leaf nodes on this level. + * Valid only when private shaper is supported for the + * leaf nodes on this level. + */ + uint64_t shaper_private_rate_max; + + /** Maximum number of shared shapers that any leaf node + * on this level can be part of. The value of zero + * indicates that shared shapers are not supported by + * the leaf nodes on this level. When non-zero, it + * indicates there is at least one leaf node on this + * level that meets this condition, which may not be the + * case for all the leaf nodes on this level. + */ + uint32_t shaper_shared_n_max; + + /** WRED packet mode support. When non-zero, this + * parameter indicates that there is atleast one leaf + * node on this level that supports the WRED packet + * mode, which might not be true for all the leaf + * nodes. In packet mode, the WRED thresholds specify + * the queue length in packets, as opposed to bytes. + */ + int cman_wred_packet_mode_supported; + + /** WRED byte mode support. When non-zero, this + * parameter indicates that there is atleast one leaf + * node on this level that supports the WRED byte mode, + * which might not be true for all the leaf nodes. In + * byte mode, the WRED thresholds specify the queue + * length in bytes, as opposed to packets. + */ + int cman_wred_byte_mode_supported; + + /** Head drop algorithm support. When non-zero, this + * parameter indicates that there is at least one leaf + * node on this level that supports the head drop + * algorithm, which might not be true for all the leaf + * nodes on this level. + */ + int cman_head_drop_supported; + + /** Private WRED context support. When non-zero, it + * indicates there is at least one node on this level + * with private WRED context support, which may not be + * true for all the leaf nodes on this level. + */ + int cman_wred_context_private_supported; + + /** Maximum number of shared WRED contexts that any + * leaf node on this level can be part of. The value of + * zero indicates that shared WRED contexts are not + * supported by the leaf nodes on this level. When + * non-zero, it indicates there is at least one leaf + * node on this level that meets this condition, which + * may not be the case for all the leaf nodes on this + * level. + */ + uint32_t cman_wred_context_shared_n_max; + + /** Mask of statistics counter types supported by the + * leaf nodes on this level. Every supported statistics + * counter type is supported by at least one leaf node + * on this level, which may not be true for all the leaf + * nodes on this level. + * @see enum rte_tm_stats_type + */ + uint64_t stats_mask; + } leaf; + }; +}; + +/** + * Traffic manager node capabilities + */ +struct rte_tm_node_capabilities { + /** Private shaper support for the current node. */ + int shaper_private_supported; + + /** Dual rate shaping support for private shaper of current node. + * Valid only when private shaper is supported by the current node. + */ + int shaper_private_dual_rate_supported; + + /** Minimum committed/peak rate (bytes per second) for private + * shaper of current node. Valid only when private shaper is supported + * by the current node. + */ + uint64_t shaper_private_rate_min; + + /** Maximum committed/peak rate (bytes per second) for private + * shaper of current node. Valid only when private shaper is supported + * by the current node. + */ + uint64_t shaper_private_rate_max; + + /** Maximum number of shared shapers the current node can be part of. + * The value of zero indicates that shared shapers are not supported by + * the current node. + */ + uint32_t shaper_shared_n_max; + + RTE_STD_C11 + union { + /** Items valid only for non-leaf nodes. */ + struct { + /** Maximum number of children nodes. */ + uint32_t sched_n_children_max; + + /** Maximum number of supported priority levels. The + * value of zero is invalid. The value of 1 indicates + * that only priority 0 is supported, which essentially + * means that Strict Priority (SP) algorithm is not + * supported. + */ + uint32_t sched_sp_n_priorities_max; + + /** Maximum number of sibling nodes that can have the + * same priority at any given time, i.e. maximum size + * of the WFQ sibling node group. The value of zero + * is invalid. The value of 1 indicates that WFQ + * algorithm is not supported. The maximum value is + * *sched_n_children_max*. + */ + uint32_t sched_wfq_n_children_per_group_max; + + /** Maximum number of priority levels that can have + * more than one child node at any given time, i.e. + * maximum number of WFQ sibling node groups that have + * two or more members. The value of zero states that + * WFQ algorithm is not supported. The value of 1 + * indicates that (*sched_sp_n_priorities_max* - 1) + * priority levels have at most one child node, so there + * can be only one priority level with two or more + * sibling nodes making up a WFQ group. The maximum + * value is: min(floor(*sched_n_children_max* / 2), + * *sched_sp_n_priorities_max*). + */ + uint32_t sched_wfq_n_groups_max; + + /** Maximum WFQ weight. The value of 1 indicates that + * all sibling nodes with same priority have the same + * WFQ weight, so WFQ is reduced to FQ. + */ + uint32_t sched_wfq_weight_max; + } nonleaf; + + /** Items valid only for leaf nodes. */ + struct { + /** WRED packet mode support for current node. */ + int cman_wred_packet_mode_supported; + + /** WRED byte mode support for current node. */ + int cman_wred_byte_mode_supported; + + /** Head drop algorithm support for current node. */ + int cman_head_drop_supported; + + /** Private WRED context support for current node. */ + int cman_wred_context_private_supported; + + /** Maximum number of shared WRED contexts the current + * node can be part of. The value of zero indicates that + * shared WRED contexts are not supported by the current + * node. + */ + uint32_t cman_wred_context_shared_n_max; + } leaf; + }; + + /** Mask of statistics counter types supported by the current node. + * @see enum rte_tm_stats_type + */ + uint64_t stats_mask; +}; + +/** + * Congestion management (CMAN) mode + * + * This is used for controlling the admission of packets into a packet queue or + * group of packet queues on congestion. On request of writing a new packet + * into the current queue while the queue is full, the *tail drop* algorithm + * drops the new packet while leaving the queue unmodified, as opposed to *head + * drop* algorithm, which drops the packet at the head of the queue (the oldest + * packet waiting in the queue) and admits the new packet at the tail of the + * queue. + * + * The *Random Early Detection (RED)* algorithm works by proactively dropping + * more and more input packets as the queue occupancy builds up. When the queue + * is full or almost full, RED effectively works as *tail drop*. The *Weighted + * RED* algorithm uses a separate set of RED thresholds for each packet color. + */ +enum rte_tm_cman_mode { + RTE_TM_CMAN_TAIL_DROP = 0, /**< Tail drop */ + RTE_TM_CMAN_HEAD_DROP, /**< Head drop */ + RTE_TM_CMAN_WRED, /**< Weighted Random Early Detection (WRED) */ +}; + +/** + * Random Early Detection (RED) profile + */ +struct rte_tm_red_params { + /** Minimum queue threshold */ + uint32_t min_th; + + /** Maximum queue threshold */ + uint32_t max_th; + + /** Inverse of packet marking probability maximum value (maxp), i.e. + * maxp_inv = 1 / maxp + */ + uint16_t maxp_inv; + + /** Negated log2 of queue weight (wq), i.e. wq = 1 / (2 ^ wq_log2) */ + uint16_t wq_log2; +}; + +/** + * Weighted RED (WRED) profile + * + * Multiple WRED contexts can share the same WRED profile. Each leaf node with + * WRED enabled as its congestion management mode has zero or one private WRED + * context (only one leaf node using it) and/or zero, one or several shared + * WRED contexts (multiple leaf nodes use the same WRED context). A private + * WRED context is used to perform congestion management for a single leaf + * node, while a shared WRED context is used to perform congestion management + * for a group of leaf nodes. + * + * @see struct rte_tm_capabilities::cman_wred_packet_mode_supported + * @see struct rte_tm_capabilities::cman_wred_byte_mode_supported + */ +struct rte_tm_wred_params { + /** One set of RED parameters per packet color */ + struct rte_tm_red_params red_params[RTE_TM_COLORS]; + + /** When non-zero, the *min_th* and *max_th* thresholds are specified + * in packets (WRED packet mode). When zero, the *min_th* and *max_th* + * thresholds are specified in bytes (WRED byte mode) + */ + int packet_mode; +}; + +/** + * Token bucket + */ +struct rte_tm_token_bucket { + /** Token bucket rate (bytes per second) */ + uint64_t rate; + + /** Token bucket size (bytes), a.k.a. max burst size */ + uint64_t size; +}; + +/** + * Shaper (rate limiter) profile + * + * Multiple shaper instances can share the same shaper profile. Each node has + * zero or one private shaper (only one node using it) and/or zero, one or + * several shared shapers (multiple nodes use the same shaper instance). + * A private shaper is used to perform traffic shaping for a single node, while + * a shared shaper is used to perform traffic shaping for a group of nodes. + * + * Single rate shapers use a single token bucket. A single rate shaper can be + * configured by setting the rate of the committed bucket to zero, which + * effectively disables this bucket. The peak bucket is used to limit the rate + * and the burst size for the current shaper. + * + * Dual rate shapers use both the committed and the peak token buckets. The + * rate of the peak bucket has to be bigger than zero, as well as greater than + * or equal to the rate of the committed bucket. + */ +struct rte_tm_shaper_params { + /** Committed token bucket */ + struct rte_tm_token_bucket committed; + + /** Peak token bucket */ + struct rte_tm_token_bucket peak; + + /** Signed value to be added to the length of each packet for the + * purpose of shaping. Can be used to correct the packet length with + * the framing overhead bytes that are also consumed on the wire (e.g. + * RTE_TM_ETH_FRAMING_OVERHEAD_FCS). + */ + int32_t pkt_length_adjust; +}; + +/** + * Node parameters + * + * Each non-leaf node has multiple inputs (its children nodes) and single output + * (which is input to its parent node). It arbitrates its inputs using Strict + * Priority (SP) and Weighted Fair Queuing (WFQ) algorithms to schedule input + * packets to its output while observing its shaping (rate limiting) + * constraints. + * + * Algorithms such as Weighted Round Robin (WRR), Byte-level WRR, Deficit WRR + * (DWRR), etc. are considered approximations of the WFQ ideal and are + * assimilated to WFQ, although an associated implementation-dependent trade-off + * on accuracy, performance and resource usage might exist. + * + * Children nodes with different priorities are scheduled using the SP algorithm + * based on their priority, with zero (0) as the highest priority. Children with + * the same priority are scheduled using the WFQ algorithm according to their + * weights. The WFQ weight of a given child node is relative to the sum of the + * weights of all its sibling nodes that have the same priority, with one (1) as + * the lowest weight. For each SP priority, the WFQ weight mode can be set as + * either byte-based or packet-based. + * + * Each leaf node sits on top of a TX queue of the current Ethernet port. Hence, + * the leaf nodes are predefined, with their node IDs set to 0 .. (N-1), where N + * is the number of TX queues configured for the current Ethernet port. The + * non-leaf nodes have their IDs generated by the application. + */ +struct rte_tm_node_params { + /** Shaper profile for the private shaper. The absence of the private + * shaper for the current node is indicated by setting this parameter + * to RTE_TM_SHAPER_PROFILE_ID_NONE. + */ + uint32_t shaper_profile_id; + + /** User allocated array of valid shared shaper IDs. */ + uint32_t *shared_shaper_id; + + /** Number of shared shaper IDs in the *shared_shaper_id* array. */ + uint32_t n_shared_shapers; + + RTE_STD_C11 + union { + /** Parameters only valid for non-leaf nodes. */ + struct { + /** WFQ weight mode for each SP priority. When NULL, it + * indicates that WFQ is to be used for all priorities. + * When non-NULL, it points to a pre-allocated array of + * *n_sp_priorities* values, with non-zero value for + * byte-mode and zero for packet-mode. + */ + int *wfq_weight_mode; + + /** Number of SP priorities. */ + uint32_t n_sp_priorities; + } nonleaf; + + /** Parameters only valid for leaf nodes. */ + struct { + /** Congestion management mode */ + enum rte_tm_cman_mode cman; + + /** WRED parameters (only valid when *cman* is set to + * WRED). + */ + struct { + /** WRED profile for private WRED context. The + * absence of a private WRED context for the + * current leaf node is indicated by value + * RTE_TM_WRED_PROFILE_ID_NONE. + */ + uint32_t wred_profile_id; + + /** User allocated array of shared WRED context + * IDs. When set to NULL, it indicates that the + * current leaf node should not currently be + * part of any shared WRED contexts. + */ + uint32_t *shared_wred_context_id; + + /** Number of elements in the + * *shared_wred_context_id* array. Only valid + * when *shared_wred_context_id* is non-NULL, + * in which case it should be non-zero. + */ + uint32_t n_shared_wred_contexts; + } wred; + } leaf; + }; + + /** Mask of statistics counter types to be enabled for this node. This + * needs to be a subset of the statistics counter types available for + * the current node. Any statistics counter type not included in this + * set is to be disabled for the current node. + * @see enum rte_tm_stats_type + */ + uint64_t stats_mask; +}; + +/** + * Verbose error types. + * + * Most of them provide the type of the object referenced by struct + * rte_tm_error::cause. + */ +enum rte_tm_error_type { + RTE_TM_ERROR_TYPE_NONE, /**< No error. */ + RTE_TM_ERROR_TYPE_UNSPECIFIED, /**< Cause unspecified. */ + RTE_TM_ERROR_TYPE_CAPABILITIES, + RTE_TM_ERROR_TYPE_LEVEL_ID, + RTE_TM_ERROR_TYPE_WRED_PROFILE, + RTE_TM_ERROR_TYPE_WRED_PROFILE_GREEN, + RTE_TM_ERROR_TYPE_WRED_PROFILE_YELLOW, + RTE_TM_ERROR_TYPE_WRED_PROFILE_RED, + RTE_TM_ERROR_TYPE_WRED_PROFILE_ID, + RTE_TM_ERROR_TYPE_SHARED_WRED_CONTEXT_ID, + RTE_TM_ERROR_TYPE_SHAPER_PROFILE, + RTE_TM_ERROR_TYPE_SHAPER_PROFILE_COMMITTED_RATE, + RTE_TM_ERROR_TYPE_SHAPER_PROFILE_COMMITTED_SIZE, + RTE_TM_ERROR_TYPE_SHAPER_PROFILE_PEAK_RATE, + RTE_TM_ERROR_TYPE_SHAPER_PROFILE_PEAK_SIZE, + RTE_TM_ERROR_TYPE_SHAPER_PROFILE_PKT_ADJUST_LEN, + RTE_TM_ERROR_TYPE_SHAPER_PROFILE_ID, + RTE_TM_ERROR_TYPE_SHARED_SHAPER_ID, + RTE_TM_ERROR_TYPE_NODE_PARENT_NODE_ID, + RTE_TM_ERROR_TYPE_NODE_PRIORITY, + RTE_TM_ERROR_TYPE_NODE_WEIGHT, + RTE_TM_ERROR_TYPE_NODE_PARAMS, + RTE_TM_ERROR_TYPE_NODE_PARAMS_SHAPER_PROFILE_ID, + RTE_TM_ERROR_TYPE_NODE_PARAMS_SHARED_SHAPER_ID, + RTE_TM_ERROR_TYPE_NODE_PARAMS_N_SHARED_SHAPERS, + RTE_TM_ERROR_TYPE_NODE_PARAMS_WFQ_WEIGHT_MODE, + RTE_TM_ERROR_TYPE_NODE_PARAMS_N_SP_PRIORITIES, + RTE_TM_ERROR_TYPE_NODE_PARAMS_CMAN, + RTE_TM_ERROR_TYPE_NODE_PARAMS_WRED_PROFILE_ID, + RTE_TM_ERROR_TYPE_NODE_PARAMS_SHARED_WRED_CONTEXT_ID, + RTE_TM_ERROR_TYPE_NODE_PARAMS_N_SHARED_WRED_CONTEXTS, + RTE_TM_ERROR_TYPE_NODE_PARAMS_STATS, + RTE_TM_ERROR_TYPE_NODE_ID, +}; + +/** + * Verbose error structure definition. + * + * This object is normally allocated by applications and set by PMDs, the + * message points to a constant string which does not need to be freed by + * the application, however its pointer can be considered valid only as long + * as its associated DPDK port remains configured. Closing the underlying + * device or unloading the PMD invalidates it. + * + * Both cause and message may be NULL regardless of the error type. + */ +struct rte_tm_error { + enum rte_tm_error_type type; /**< Cause field and error type. */ + const void *cause; /**< Object responsible for the error. */ + const char *message; /**< Human-readable error message. */ +}; + +/** + * Traffic manager get number of leaf nodes + * + * Each leaf node sits on on top of a TX queue of the current Ethernet port. + * Therefore, the set of leaf nodes is predefined, their number is always equal + * to N (where N is the number of TX queues configured for the current port) + * and their IDs are 0 .. (N-1). + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[out] n_leaf_nodes + * Number of leaf nodes for the current port. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + */ +int +rte_tm_get_number_of_leaf_nodes(uint16_t port_id, + uint32_t *n_leaf_nodes, + struct rte_tm_error *error); + +/** + * Traffic manager node ID validate and type (i.e. leaf or non-leaf) get + * + * The leaf nodes have predefined IDs in the range of 0 .. (N-1), where N is + * the number of TX queues of the current Ethernet port. The non-leaf nodes + * have their IDs generated by the application outside of the above range, + * which is reserved for leaf nodes. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID value. Needs to be valid. + * @param[out] is_leaf + * Set to non-zero value when node is leaf and to zero otherwise (non-leaf). + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + */ +int +rte_tm_node_type_get(uint16_t port_id, + uint32_t node_id, + int *is_leaf, + struct rte_tm_error *error); + +/** + * Traffic manager capabilities get + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[out] cap + * Traffic manager capabilities. Needs to be pre-allocated and valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + */ +int +rte_tm_capabilities_get(uint16_t port_id, + struct rte_tm_capabilities *cap, + struct rte_tm_error *error); + +/** + * Traffic manager level capabilities get + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] level_id + * The hierarchy level identifier. The value of 0 identifies the level of the + * root node. + * @param[out] cap + * Traffic manager level capabilities. Needs to be pre-allocated and valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + */ +int +rte_tm_level_capabilities_get(uint16_t port_id, + uint32_t level_id, + struct rte_tm_level_capabilities *cap, + struct rte_tm_error *error); + +/** + * Traffic manager node capabilities get + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid. + * @param[out] cap + * Traffic manager node capabilities. Needs to be pre-allocated and valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + */ +int +rte_tm_node_capabilities_get(uint16_t port_id, + uint32_t node_id, + struct rte_tm_node_capabilities *cap, + struct rte_tm_error *error); + +/** + * Traffic manager WRED profile add + * + * Create a new WRED profile with ID set to *wred_profile_id*. The new profile + * is used to create one or several WRED contexts. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] wred_profile_id + * WRED profile ID for the new profile. Needs to be unused. + * @param[in] profile + * WRED profile parameters. Needs to be pre-allocated and valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::cman_wred_context_n_max + */ +int +rte_tm_wred_profile_add(uint16_t port_id, + uint32_t wred_profile_id, + struct rte_tm_wred_params *profile, + struct rte_tm_error *error); + +/** + * Traffic manager WRED profile delete + * + * Delete an existing WRED profile. This operation fails when there is + * currently at least one user (i.e. WRED context) of this WRED profile. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] wred_profile_id + * WRED profile ID. Needs to be the valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::cman_wred_context_n_max + */ +int +rte_tm_wred_profile_delete(uint16_t port_id, + uint32_t wred_profile_id, + struct rte_tm_error *error); + +/** + * Traffic manager shared WRED context add or update + * + * When *shared_wred_context_id* is invalid, a new WRED context with this ID is + * created by using the WRED profile identified by *wred_profile_id*. + * + * When *shared_wred_context_id* is valid, this WRED context is no longer using + * the profile previously assigned to it and is updated to use the profile + * identified by *wred_profile_id*. + * + * A valid shared WRED context can be assigned to several hierarchy leaf nodes + * configured to use WRED as the congestion management mode. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] shared_wred_context_id + * Shared WRED context ID + * @param[in] wred_profile_id + * WRED profile ID. Needs to be the valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::cman_wred_context_shared_n_max + */ +int +rte_tm_shared_wred_context_add_update(uint16_t port_id, + uint32_t shared_wred_context_id, + uint32_t wred_profile_id, + struct rte_tm_error *error); + +/** + * Traffic manager shared WRED context delete + * + * Delete an existing shared WRED context. This operation fails when there is + * currently at least one user (i.e. hierarchy leaf node) of this shared WRED + * context. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] shared_wred_context_id + * Shared WRED context ID. Needs to be the valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::cman_wred_context_shared_n_max + */ +int +rte_tm_shared_wred_context_delete(uint16_t port_id, + uint32_t shared_wred_context_id, + struct rte_tm_error *error); + +/** + * Traffic manager shaper profile add + * + * Create a new shaper profile with ID set to *shaper_profile_id*. The new + * shaper profile is used to create one or several shapers. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] shaper_profile_id + * Shaper profile ID for the new profile. Needs to be unused. + * @param[in] profile + * Shaper profile parameters. Needs to be pre-allocated and valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::shaper_n_max + */ +int +rte_tm_shaper_profile_add(uint16_t port_id, + uint32_t shaper_profile_id, + struct rte_tm_shaper_params *profile, + struct rte_tm_error *error); + +/** + * Traffic manager shaper profile delete + * + * Delete an existing shaper profile. This operation fails when there is + * currently at least one user (i.e. shaper) of this shaper profile. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] shaper_profile_id + * Shaper profile ID. Needs to be the valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::shaper_n_max + */ +int +rte_tm_shaper_profile_delete(uint16_t port_id, + uint32_t shaper_profile_id, + struct rte_tm_error *error); + +/** + * Traffic manager shared shaper add or update + * + * When *shared_shaper_id* is not a valid shared shaper ID, a new shared shaper + * with this ID is created using the shaper profile identified by + * *shaper_profile_id*. + * + * When *shared_shaper_id* is a valid shared shaper ID, this shared shaper is + * no longer using the shaper profile previously assigned to it and is updated + * to use the shaper profile identified by *shaper_profile_id*. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] shared_shaper_id + * Shared shaper ID + * @param[in] shaper_profile_id + * Shaper profile ID. Needs to be the valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::shaper_shared_n_max + */ +int +rte_tm_shared_shaper_add_update(uint16_t port_id, + uint32_t shared_shaper_id, + uint32_t shaper_profile_id, + struct rte_tm_error *error); + +/** + * Traffic manager shared shaper delete + * + * Delete an existing shared shaper. This operation fails when there is + * currently at least one user (i.e. hierarchy node) of this shared shaper. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] shared_shaper_id + * Shared shaper ID. Needs to be the valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::shaper_shared_n_max + */ +int +rte_tm_shared_shaper_delete(uint16_t port_id, + uint32_t shared_shaper_id, + struct rte_tm_error *error); + +/** + * Traffic manager node add + * + * Create new node and connect it as child of an existing node. The new node is + * further identified by *node_id*, which needs to be unused by any of the + * existing nodes. The parent node is identified by *parent_node_id*, which + * needs to be the valid ID of an existing non-leaf node. The parent node is + * going to use the provided SP *priority* and WFQ *weight* to schedule its new + * child node. + * + * This function has to be called for both leaf and non-leaf nodes. In the case + * of leaf nodes (i.e. *node_id* is within the range of 0 .. (N-1), with N as + * the number of configured TX queues of the current port), the leaf node is + * configured rather than created (as the set of leaf nodes is predefined) and + * it is also connected as child of an existing node. + * + * The first node that is added becomes the root node and all the nodes that + * are subsequently added have to be added as descendants of the root node. The + * parent of the root node has to be specified as RTE_TM_NODE_ID_NULL and there + * can only be one node with this parent ID (i.e. the root node). Further + * restrictions for root node: needs to be non-leaf, its private shaper profile + * needs to be valid and single rate, cannot use any shared shapers. + * + * When called before rte_tm_hierarchy_commit() invocation, this function is + * typically used to define the initial start-up hierarchy for the port. + * Provided that dynamic hierarchy updates are supported by the current port (as + * advertised in the port capability set), this function can be also called + * after the rte_tm_hierarchy_commit() invocation. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be unused by any of the existing nodes. + * @param[in] parent_node_id + * Parent node ID. Needs to be the valid. + * @param[in] priority + * Node priority. The highest node priority is zero. Used by the SP algorithm + * running on the parent of the current node for scheduling this child node. + * @param[in] weight + * Node weight. The node weight is relative to the weight sum of all siblings + * that have the same priority. The lowest weight is one. Used by the WFQ + * algorithm running on the parent of the current node for scheduling this + * child node. + * @param[in] level_id + * Level ID that should be met by this node. The hierarchy level of the + * current node is already fully specified through its parent node (i.e. the + * level of this node is equal to the level of its parent node plus one), + * therefore the reason for providing this parameter is to enable the + * application to perform step-by-step checking of the node level during + * successive invocations of this function. When not desired, this check can + * be disabled by assigning value RTE_TM_NODE_LEVEL_ID_ANY to this parameter. + * @param[in] params + * Node parameters. Needs to be pre-allocated and valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see rte_tm_hierarchy_commit() + * @see RTE_TM_UPDATE_NODE_ADD_DELETE + * @see RTE_TM_NODE_LEVEL_ID_ANY + * @see struct rte_tm_capabilities + */ +int +rte_tm_node_add(uint16_t port_id, + uint32_t node_id, + uint32_t parent_node_id, + uint32_t priority, + uint32_t weight, + uint32_t level_id, + struct rte_tm_node_params *params, + struct rte_tm_error *error); + +/** + * Traffic manager node delete + * + * Delete an existing node. This operation fails when this node currently has + * at least one user (i.e. child node). + * + * When called before rte_tm_hierarchy_commit() invocation, this function is + * typically used to define the initial start-up hierarchy for the port. + * Provided that dynamic hierarchy updates are supported by the current port (as + * advertised in the port capability set), this function can be also called + * after the rte_tm_hierarchy_commit() invocation. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see RTE_TM_UPDATE_NODE_ADD_DELETE + */ +int +rte_tm_node_delete(uint16_t port_id, + uint32_t node_id, + struct rte_tm_error *error); + +/** + * Traffic manager node suspend + * + * Suspend an existing node. While the node is in suspended state, no packet is + * scheduled from this node and its descendants. The node exits the suspended + * state through the node resume operation. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see rte_tm_node_resume() + * @see RTE_TM_UPDATE_NODE_SUSPEND_RESUME + */ +int +rte_tm_node_suspend(uint16_t port_id, + uint32_t node_id, + struct rte_tm_error *error); + +/** + * Traffic manager node resume + * + * Resume an existing node that is currently in suspended state. The node + * entered the suspended state as result of a previous node suspend operation. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see rte_tm_node_suspend() + * @see RTE_TM_UPDATE_NODE_SUSPEND_RESUME + */ +int +rte_tm_node_resume(uint16_t port_id, + uint32_t node_id, + struct rte_tm_error *error); + +/** + * Traffic manager hierarchy commit + * + * This function is called during the port initialization phase (before the + * Ethernet port is started) to freeze the start-up hierarchy. + * + * This function typically performs the following steps: + * a) It validates the start-up hierarchy that was previously defined for the + * current port through successive rte_tm_node_add() invocations; + * b) Assuming successful validation, it performs all the necessary port + * specific configuration operations to install the specified hierarchy on + * the current port, with immediate effect once the port is started. + * + * This function fails when the currently configured hierarchy is not supported + * by the Ethernet port, in which case the user can abort or try out another + * hierarchy configuration (e.g. a hierarchy with less leaf nodes), which can be + * build from scratch (when *clear_on_fail* is enabled) or by modifying the + * existing hierarchy configuration (when *clear_on_fail* is disabled). + * + * Note that this function can still fail due to other causes (e.g. not enough + * memory available in the system, etc), even though the specified hierarchy is + * supported in principle by the current port. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] clear_on_fail + * On function call failure, hierarchy is cleared when this parameter is + * non-zero and preserved when this parameter is equal to zero. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see rte_tm_node_add() + * @see rte_tm_node_delete() + */ +int +rte_tm_hierarchy_commit(uint16_t port_id, + int clear_on_fail, + struct rte_tm_error *error); + +/** + * Traffic manager node parent update + * + * This function may be used to move a node and its children to a different + * parent. Additionally, if the new parent is the same as the current parent, + * this function will update the priority/weight of an existing node. + * + * Restriction for root node: its parent cannot be changed. + * + * This function can only be called after the rte_tm_hierarchy_commit() + * invocation. Its success depends on the port support for this operation, as + * advertised through the port capability set. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid. + * @param[in] parent_node_id + * Node ID for the new parent. Needs to be valid. + * @param[in] priority + * Node priority. The highest node priority is zero. Used by the SP algorithm + * running on the parent of the current node for scheduling this child node. + * @param[in] weight + * Node weight. The node weight is relative to the weight sum of all siblings + * that have the same priority. The lowest weight is zero. Used by the WFQ + * algorithm running on the parent of the current node for scheduling this + * child node. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see RTE_TM_UPDATE_NODE_PARENT_KEEP_LEVEL + * @see RTE_TM_UPDATE_NODE_PARENT_CHANGE_LEVEL + */ +int +rte_tm_node_parent_update(uint16_t port_id, + uint32_t node_id, + uint32_t parent_node_id, + uint32_t priority, + uint32_t weight, + struct rte_tm_error *error); + +/** + * Traffic manager node private shaper update + * + * Restriction for the root node: its private shaper profile needs to be valid + * and single rate. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid. + * @param[in] shaper_profile_id + * Shaper profile ID for the private shaper of the current node. Needs to be + * either valid shaper profile ID or RTE_TM_SHAPER_PROFILE_ID_NONE, with + * the latter disabling the private shaper of the current node. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::shaper_private_n_max + */ +int +rte_tm_node_shaper_update(uint16_t port_id, + uint32_t node_id, + uint32_t shaper_profile_id, + struct rte_tm_error *error); + +/** + * Traffic manager node shared shapers update + * + * Restriction for root node: cannot use any shared rate shapers. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid. + * @param[in] shared_shaper_id + * Shared shaper ID. Needs to be valid. + * @param[in] add + * Set to non-zero value to add this shared shaper to current node or to zero + * to delete this shared shaper from current node. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::shaper_shared_n_max + */ +int +rte_tm_node_shared_shaper_update(uint16_t port_id, + uint32_t node_id, + uint32_t shared_shaper_id, + int add, + struct rte_tm_error *error); + +/** + * Traffic manager node enabled statistics counters update + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid. + * @param[in] stats_mask + * Mask of statistics counter types to be enabled for the current node. This + * needs to be a subset of the statistics counter types available for the + * current node. Any statistics counter type not included in this set is to + * be disabled for the current node. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see enum rte_tm_stats_type + * @see RTE_TM_UPDATE_NODE_STATS + */ +int +rte_tm_node_stats_update(uint16_t port_id, + uint32_t node_id, + uint64_t stats_mask, + struct rte_tm_error *error); + +/** + * Traffic manager node WFQ weight mode update + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid non-leaf node ID. + * @param[in] wfq_weight_mode + * WFQ weight mode for each SP priority. When NULL, it indicates that WFQ is + * to be used for all priorities. When non-NULL, it points to a pre-allocated + * array of *n_sp_priorities* values, with non-zero value for byte-mode and + * zero for packet-mode. + * @param[in] n_sp_priorities + * Number of SP priorities. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see RTE_TM_UPDATE_NODE_WFQ_WEIGHT_MODE + * @see RTE_TM_UPDATE_NODE_N_SP_PRIORITIES + */ +int +rte_tm_node_wfq_weight_mode_update(uint16_t port_id, + uint32_t node_id, + int *wfq_weight_mode, + uint32_t n_sp_priorities, + struct rte_tm_error *error); + +/** + * Traffic manager node congestion management mode update + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid leaf node ID. + * @param[in] cman + * Congestion management mode. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see RTE_TM_UPDATE_NODE_CMAN + */ +int +rte_tm_node_cman_update(uint16_t port_id, + uint32_t node_id, + enum rte_tm_cman_mode cman, + struct rte_tm_error *error); + +/** + * Traffic manager node private WRED context update + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid leaf node ID. + * @param[in] wred_profile_id + * WRED profile ID for the private WRED context of the current node. Needs to + * be either valid WRED profile ID or RTE_TM_WRED_PROFILE_ID_NONE, with the + * latter disabling the private WRED context of the current node. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::cman_wred_context_private_n_max +*/ +int +rte_tm_node_wred_context_update(uint16_t port_id, + uint32_t node_id, + uint32_t wred_profile_id, + struct rte_tm_error *error); + +/** + * Traffic manager node shared WRED context update + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid leaf node ID. + * @param[in] shared_wred_context_id + * Shared WRED context ID. Needs to be valid. + * @param[in] add + * Set to non-zero value to add this shared WRED context to current node or + * to zero to delete this shared WRED context from current node. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::cman_wred_context_shared_n_max + */ +int +rte_tm_node_shared_wred_context_update(uint16_t port_id, + uint32_t node_id, + uint32_t shared_wred_context_id, + int add, + struct rte_tm_error *error); + +/** + * Traffic manager node statistics counters read + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] node_id + * Node ID. Needs to be valid. + * @param[out] stats + * When non-NULL, it contains the current value for the statistics counters + * enabled for the current node. + * @param[out] stats_mask + * When non-NULL, it contains the mask of statistics counter types that are + * currently enabled for this node, indicating which of the counters + * retrieved with the *stats* structure are valid. + * @param[in] clear + * When this parameter has a non-zero value, the statistics counters are + * cleared (i.e. set to zero) immediately after they have been read, + * otherwise the statistics counters are left untouched. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see enum rte_tm_stats_type + */ +int +rte_tm_node_stats_read(uint16_t port_id, + uint32_t node_id, + struct rte_tm_node_stats *stats, + uint64_t *stats_mask, + int clear, + struct rte_tm_error *error); + +/** + * Traffic manager packet marking - VLAN DEI (IEEE 802.1Q) + * + * IEEE 802.1p maps the traffic class to the VLAN Priority Code Point (PCP) + * field (3 bits), while IEEE 802.1q maps the drop priority to the VLAN Drop + * Eligible Indicator (DEI) field (1 bit), which was previously named Canonical + * Format Indicator (CFI). + * + * All VLAN frames of a given color get their DEI bit set if marking is enabled + * for this color; otherwise, their DEI bit is left as is (either set or not). + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] mark_green + * Set to non-zero value to enable marking of green packets and to zero to + * disable it. + * @param[in] mark_yellow + * Set to non-zero value to enable marking of yellow packets and to zero to + * disable it. + * @param[in] mark_red + * Set to non-zero value to enable marking of red packets and to zero to + * disable it. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::mark_vlan_dei_supported + */ +int +rte_tm_mark_vlan_dei(uint16_t port_id, + int mark_green, + int mark_yellow, + int mark_red, + struct rte_tm_error *error); + +/** + * Traffic manager packet marking - IPv4 / IPv6 ECN (IETF RFC 3168) + * + * IETF RFCs 2474 and 3168 reorganize the IPv4 Type of Service (TOS) field + * (8 bits) and the IPv6 Traffic Class (TC) field (8 bits) into Differentiated + * Services Codepoint (DSCP) field (6 bits) and Explicit Congestion + * Notification (ECN) field (2 bits). The DSCP field is typically used to + * encode the traffic class and/or drop priority (RFC 2597), while the ECN + * field is used by RFC 3168 to implement a congestion notification mechanism + * to be leveraged by transport layer protocols such as TCP and SCTP that have + * congestion control mechanisms. + * + * When congestion is experienced, as alternative to dropping the packet, + * routers can change the ECN field of input packets from 2'b01 or 2'b10 + * (values indicating that source endpoint is ECN-capable) to 2'b11 (meaning + * that congestion is experienced). The destination endpoint can use the + * ECN-Echo (ECE) TCP flag to relay the congestion indication back to the + * source endpoint, which acknowledges it back to the destination endpoint with + * the Congestion Window Reduced (CWR) TCP flag. + * + * All IPv4/IPv6 packets of a given color with ECN set to 2’b01 or 2’b10 + * carrying TCP or SCTP have their ECN set to 2’b11 if the marking feature is + * enabled for the current color, otherwise the ECN field is left as is. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] mark_green + * Set to non-zero value to enable marking of green packets and to zero to + * disable it. + * @param[in] mark_yellow + * Set to non-zero value to enable marking of yellow packets and to zero to + * disable it. + * @param[in] mark_red + * Set to non-zero value to enable marking of red packets and to zero to + * disable it. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::mark_ip_ecn_tcp_supported + * @see struct rte_tm_capabilities::mark_ip_ecn_sctp_supported + */ +int +rte_tm_mark_ip_ecn(uint16_t port_id, + int mark_green, + int mark_yellow, + int mark_red, + struct rte_tm_error *error); + +/** + * Traffic manager packet marking - IPv4 / IPv6 DSCP (IETF RFC 2597) + * + * IETF RFC 2597 maps the traffic class and the drop priority to the IPv4/IPv6 + * Differentiated Services Codepoint (DSCP) field (6 bits). Here are the DSCP + * values proposed by this RFC: + * + * <pre> Class 1 Class 2 Class 3 Class 4 </pre> + * <pre> +----------+----------+----------+----------+</pre> + * <pre>Low Drop Prec | 001010 | 010010 | 011010 | 100010 |</pre> + * <pre>Medium Drop Prec | 001100 | 010100 | 011100 | 100100 |</pre> + * <pre>High Drop Prec | 001110 | 010110 | 011110 | 100110 |</pre> + * <pre> +----------+----------+----------+----------+</pre> + * + * There are 4 traffic classes (classes 1 .. 4) encoded by DSCP bits 1 and 2, + * as well as 3 drop priorities (low/medium/high) encoded by DSCP bits 3 and 4. + * + * All IPv4/IPv6 packets have their color marked into DSCP bits 3 and 4 as + * follows: green mapped to Low Drop Precedence (2’b01), yellow to Medium + * (2’b10) and red to High (2’b11). Marking needs to be explicitly enabled + * for each color; when not enabled for a given color, the DSCP field of all + * packets with that color is left as is. + * + * @param[in] port_id + * The port identifier of the Ethernet device. + * @param[in] mark_green + * Set to non-zero value to enable marking of green packets and to zero to + * disable it. + * @param[in] mark_yellow + * Set to non-zero value to enable marking of yellow packets and to zero to + * disable it. + * @param[in] mark_red + * Set to non-zero value to enable marking of red packets and to zero to + * disable it. + * @param[out] error + * Error details. Filled in only on error, when not NULL. + * @return + * 0 on success, non-zero error code otherwise. + * + * @see struct rte_tm_capabilities::mark_ip_dscp_supported + */ +int +rte_tm_mark_ip_dscp(uint16_t port_id, + int mark_green, + int mark_yellow, + int mark_red, + struct rte_tm_error *error); + +#ifdef __cplusplus +} +#endif + +#endif /* __INCLUDE_RTE_TM_H__ */ |