summaryrefslogtreecommitdiffstats
path: root/lib/librte_ether/rte_ethdev.h
diff options
context:
space:
mode:
Diffstat (limited to 'lib/librte_ether/rte_ethdev.h')
-rw-r--r--lib/librte_ether/rte_ethdev.h434
1 files changed, 302 insertions, 132 deletions
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 0adf3274..18e474db 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -180,6 +180,8 @@ extern "C" {
#include <rte_dev.h>
#include <rte_devargs.h>
#include <rte_errno.h>
+#include <rte_common.h>
+
#include "rte_ether.h"
#include "rte_eth_ctrl.h"
#include "rte_dev_info.h"
@@ -348,7 +350,18 @@ struct rte_eth_rxmode {
enum rte_eth_rx_mq_mode mq_mode;
uint32_t max_rx_pkt_len; /**< Only used if jumbo_frame enabled. */
uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/
+ /**
+ * Per-port Rx offloads to be set using DEV_RX_OFFLOAD_* flags.
+ * Only offloads set on rx_offload_capa field on rte_eth_dev_info
+ * structure are allowed to be set.
+ */
+ uint64_t offloads;
__extension__
+ /**
+ * Below bitfield API is obsolete. Application should
+ * enable per-port offloads using the offload field
+ * above.
+ */
uint16_t header_split : 1, /**< Header Split enable. */
hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable. */
hw_vlan_filter : 1, /**< VLAN filter enable. */
@@ -357,7 +370,19 @@ struct rte_eth_rxmode {
jumbo_frame : 1, /**< Jumbo Frame Receipt enable. */
hw_strip_crc : 1, /**< Enable CRC stripping by hardware. */
enable_scatter : 1, /**< Enable scatter packets rx handler */
- enable_lro : 1; /**< Enable LRO */
+ enable_lro : 1, /**< Enable LRO */
+ hw_timestamp : 1, /**< Enable HW timestamp */
+ security : 1, /**< Enable rte_security offloads */
+ /**
+ * When set the offload bitfield should be ignored.
+ * Instead per-port Rx offloads should be set on offloads
+ * field above.
+ * Per-queue offloads shuold be set on rte_eth_rxq_conf
+ * structure.
+ * This bit is temporary till rxmode bitfield offloads API will
+ * be deprecated.
+ */
+ ignore_offload_bitfield : 1;
};
/**
@@ -671,6 +696,12 @@ struct rte_eth_vmdq_rx_conf {
*/
struct rte_eth_txmode {
enum rte_eth_tx_mq_mode mq_mode; /**< TX multi-queues mode. */
+ /**
+ * Per-port Tx offloads to be set using DEV_TX_OFFLOAD_* flags.
+ * Only offloads set on tx_offload_capa field on rte_eth_dev_info
+ * structure are allowed to be set.
+ */
+ uint64_t offloads;
/* For i40e specifically */
uint16_t pvid;
@@ -691,6 +722,12 @@ struct rte_eth_rxconf {
uint16_t rx_free_thresh; /**< Drives the freeing of RX descriptors. */
uint8_t rx_drop_en; /**< Drop packets if no descriptors are available. */
uint8_t rx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
+ /**
+ * Per-queue Rx offloads to be set using DEV_RX_OFFLOAD_* flags.
+ * Only offloads set on rx_queue_offload_capa or rx_offload_capa
+ * fields on rte_eth_dev_info structure are allowed to be set.
+ */
+ uint64_t offloads;
};
#define ETH_TXQ_FLAGS_NOMULTSEGS 0x0001 /**< nb_segs=1 for all mbufs */
@@ -707,6 +744,15 @@ struct rte_eth_rxconf {
(ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
ETH_TXQ_FLAGS_NOXSUMTCP)
/**
+ * When set the txq_flags should be ignored,
+ * instead per-queue Tx offloads will be set on offloads field
+ * located on rte_eth_txq_conf struct.
+ * This flag is temporary till the rte_eth_txq_conf.txq_flags
+ * API will be deprecated.
+ */
+#define ETH_TXQ_FLAGS_IGNORE 0x8000
+
+/**
* A structure used to configure a TX ring of an Ethernet port.
*/
struct rte_eth_txconf {
@@ -717,6 +763,12 @@ struct rte_eth_txconf {
uint32_t txq_flags; /**< Set flags for the Tx queue */
uint8_t tx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
+ /**
+ * Per-queue Tx offloads to be set using DEV_TX_OFFLOAD_* flags.
+ * Only offloads set on tx_queue_offload_capa or tx_offload_capa
+ * fields on rte_eth_dev_info structure are allowed to be set.
+ */
+ uint64_t offloads;
};
/**
@@ -874,7 +926,7 @@ struct rte_eth_conf {
/**< Port dcb RX configuration. */
struct rte_eth_vmdq_rx_conf vmdq_rx_conf;
/**< Port vmdq RX configuration. */
- } rx_adv_conf; /**< Port RX filtering configuration (union). */
+ } rx_adv_conf; /**< Port RX filtering configuration. */
union {
struct rte_eth_vmdq_dcb_tx_conf vmdq_dcb_tx_conf;
/**< Port vmdq+dcb TX configuration. */
@@ -907,6 +959,20 @@ struct rte_eth_conf {
#define DEV_RX_OFFLOAD_QINQ_STRIP 0x00000020
#define DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000040
#define DEV_RX_OFFLOAD_MACSEC_STRIP 0x00000080
+#define DEV_RX_OFFLOAD_HEADER_SPLIT 0x00000100
+#define DEV_RX_OFFLOAD_VLAN_FILTER 0x00000200
+#define DEV_RX_OFFLOAD_VLAN_EXTEND 0x00000400
+#define DEV_RX_OFFLOAD_JUMBO_FRAME 0x00000800
+#define DEV_RX_OFFLOAD_CRC_STRIP 0x00001000
+#define DEV_RX_OFFLOAD_SCATTER 0x00002000
+#define DEV_RX_OFFLOAD_TIMESTAMP 0x00004000
+#define DEV_RX_OFFLOAD_SECURITY 0x00008000
+#define DEV_RX_OFFLOAD_CHECKSUM (DEV_RX_OFFLOAD_IPV4_CKSUM | \
+ DEV_RX_OFFLOAD_UDP_CKSUM | \
+ DEV_RX_OFFLOAD_TCP_CKSUM)
+#define DEV_RX_OFFLOAD_VLAN (DEV_RX_OFFLOAD_VLAN_STRIP | \
+ DEV_RX_OFFLOAD_VLAN_FILTER | \
+ DEV_RX_OFFLOAD_VLAN_EXTEND)
/**
* TX offload capabilities of a device.
@@ -929,6 +995,14 @@ struct rte_eth_conf {
/**< Multiple threads can invoke rte_eth_tx_burst() concurrently on the same
* tx queue without SW lock.
*/
+#define DEV_TX_OFFLOAD_MULTI_SEGS 0x00008000
+/**< Device supports multi segment send. */
+#define DEV_TX_OFFLOAD_MBUF_FAST_FREE 0x00010000
+/**< Device supports optimization for fast release of mbufs.
+ * When set application must guarantee that per-queue all mbufs comes from
+ * the same mempool and has refcnt = 1.
+ */
+#define DEV_TX_OFFLOAD_SECURITY 0x00020000
struct rte_pci_device;
@@ -949,8 +1023,14 @@ struct rte_eth_dev_info {
/** Maximum number of hash MAC addresses for MTA and UTA. */
uint16_t max_vfs; /**< Maximum number of VFs. */
uint16_t max_vmdq_pools; /**< Maximum number of VMDq pools. */
- uint32_t rx_offload_capa; /**< Device RX offload capabilities. */
- uint32_t tx_offload_capa; /**< Device TX offload capabilities. */
+ uint64_t rx_offload_capa;
+ /**< Device per port RX offload capabilities. */
+ uint64_t tx_offload_capa;
+ /**< Device per port TX offload capabilities. */
+ uint64_t rx_queue_offload_capa;
+ /**< Device per queue RX offload capabilities. */
+ uint64_t tx_queue_offload_capa;
+ /**< Device per queue TX offload capabilities. */
uint16_t reta_size;
/**< Device redirection table size, the total number of entries. */
uint8_t hash_key_size; /**< Hash key size in bytes */
@@ -1076,8 +1156,6 @@ TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback);
} \
} while (0)
-#define RTE_ETH_DEV_TO_PCI(eth_dev) RTE_DEV_TO_PCI((eth_dev)->device)
-
/**
* l2 tunnel configuration.
*/
@@ -1115,6 +1193,9 @@ typedef int (*eth_dev_set_link_down_t)(struct rte_eth_dev *dev);
typedef void (*eth_dev_close_t)(struct rte_eth_dev *dev);
/**< @internal Function used to close a configured Ethernet device. */
+typedef int (*eth_dev_reset_t)(struct rte_eth_dev *dev);
+/** <@internal Function used to reset a configured Ethernet device. */
+
typedef void (*eth_promiscuous_enable_t)(struct rte_eth_dev *dev);
/**< @internal Function used to enable the RX promiscuous mode of an Ethernet device. */
@@ -1131,7 +1212,7 @@ typedef int (*eth_link_update_t)(struct rte_eth_dev *dev,
int wait_to_complete);
/**< @internal Get link speed, duplex mode and state (up/down) of an Ethernet device. */
-typedef void (*eth_stats_get_t)(struct rte_eth_dev *dev,
+typedef int (*eth_stats_get_t)(struct rte_eth_dev *dev,
struct rte_eth_stats *igb_stats);
/**< @internal Get global I/O statistics of an Ethernet device. */
@@ -1245,7 +1326,7 @@ typedef int (*vlan_tpid_set_t)(struct rte_eth_dev *dev,
enum rte_vlan_type type, uint16_t tpid);
/**< @internal set the outer/inner VLAN-TPID by an Ethernet device. */
-typedef void (*vlan_offload_set_t)(struct rte_eth_dev *dev, int mask);
+typedef int (*vlan_offload_set_t)(struct rte_eth_dev *dev, int mask);
/**< @internal set VLAN offload function by an Ethernet device. */
typedef int (*vlan_pvid_set_t)(struct rte_eth_dev *dev,
@@ -1421,10 +1502,17 @@ typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev,
typedef int (*eth_tm_ops_get_t)(struct rte_eth_dev *dev, void *ops);
/**< @internal Get Traffic Management (TM) operations on an Ethernet device */
+typedef int (*eth_mtr_ops_get_t)(struct rte_eth_dev *dev, void *ops);
+/**< @internal Get Trafffic Metering and Policing (MTR) operations */
+
typedef int (*eth_get_dcb_info)(struct rte_eth_dev *dev,
struct rte_eth_dcb_info *dcb_info);
/**< @internal Get dcb information on an Ethernet device */
+typedef int (*eth_pool_ops_supported_t)(struct rte_eth_dev *dev,
+ const char *pool);
+/**< @internal Test if a port supports specific mempool ops */
+
/**
* @internal A structure containing the functions exported by an Ethernet driver.
*/
@@ -1435,6 +1523,7 @@ struct eth_dev_ops {
eth_dev_set_link_up_t dev_set_link_up; /**< Device link up. */
eth_dev_set_link_down_t dev_set_link_down; /**< Device link down. */
eth_dev_close_t dev_close; /**< Close device. */
+ eth_dev_reset_t dev_reset; /**< Reset device. */
eth_link_update_t link_update; /**< Get device link state. */
eth_promiscuous_enable_t promiscuous_enable; /**< Promiscuous ON. */
@@ -1544,6 +1633,12 @@ struct eth_dev_ops {
eth_tm_ops_get_t tm_ops_get;
/**< Get Traffic Management (TM) operations. */
+
+ eth_mtr_ops_get_t mtr_ops_get;
+ /**< Get Traffic Metering and Policing (MTR) operations. */
+
+ eth_pool_ops_supported_t pool_ops_supported;
+ /**< Test if a port supports specific mempool ops */
};
/**
@@ -1568,7 +1663,7 @@ struct eth_dev_ops {
* @return
* The number of packets returned to the user.
*/
-typedef uint16_t (*rte_rx_callback_fn)(uint8_t port, uint16_t queue,
+typedef uint16_t (*rte_rx_callback_fn)(uint16_t port, uint16_t queue,
struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t max_pkts,
void *user_param);
@@ -1592,7 +1687,7 @@ typedef uint16_t (*rte_rx_callback_fn)(uint8_t port, uint16_t queue,
* @return
* The number of packets to be written to the NIC.
*/
-typedef uint16_t (*rte_tx_callback_fn)(uint8_t port, uint16_t queue,
+typedef uint16_t (*rte_tx_callback_fn)(uint16_t port, uint16_t queue,
struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param);
/**
@@ -1649,8 +1744,12 @@ struct rte_eth_dev {
*/
struct rte_eth_rxtx_callback *pre_tx_burst_cbs[RTE_MAX_QUEUES_PER_PORT];
enum rte_eth_dev_state state; /**< Flag indicating the port state */
+ void *security_ctx; /**< Context for security ops */
} __rte_cache_aligned;
+void *
+rte_eth_dev_get_sec_ctx(uint8_t port_id);
+
struct rte_eth_dev_sriov {
uint8_t active; /**< SRIOV is active with 16, 32 or 64 pools */
uint8_t nb_q_per_pool; /**< rx queue number per pool */
@@ -1695,7 +1794,7 @@ struct rte_eth_dev_data {
/** bitmap array of associating Ethernet MAC addresses to pools */
struct ether_addr* hash_mac_addrs;
/** Device Ethernet MAC addresses of hash filtering. */
- uint8_t port_id; /**< Device [external] port identifier. */
+ uint16_t port_id; /**< Device [external] port identifier. */
__extension__
uint8_t promiscuous : 1, /**< RX promiscuous mode ON(1) / OFF(0). */
scattered_rx : 1, /**< RX of scattered packets is ON(1) / OFF(0) */
@@ -1713,8 +1812,6 @@ struct rte_eth_dev_data {
/**< VLAN filter configuration. */
};
-/** Device supports hotplug detach */
-#define RTE_ETH_DEV_DETACHABLE 0x0001
/** Device supports link state interrupt */
#define RTE_ETH_DEV_INTR_LSC 0x0002
/** Device is a bonded slave */
@@ -1737,7 +1834,7 @@ extern struct rte_eth_dev rte_eth_devices[];
* @return
* Next valid port id, RTE_MAX_ETHPORTS if there is none.
*/
-uint8_t rte_eth_find_next(uint8_t port_id);
+uint16_t rte_eth_find_next(uint16_t port_id);
/**
* Macro to iterate over all enabled ethdev ports.
@@ -1760,7 +1857,7 @@ uint8_t rte_eth_find_next(uint8_t port_id);
* @return
* - The total number of usable Ethernet devices.
*/
-uint8_t rte_eth_dev_count(void);
+uint16_t rte_eth_dev_count(void);
/**
* @internal
@@ -1821,7 +1918,7 @@ int rte_eth_dev_release_port(struct rte_eth_dev *eth_dev);
* @return
* 0 on success and port_id is filled, negative on error
*/
-int rte_eth_dev_attach(const char *devargs, uint8_t *port_id);
+int rte_eth_dev_attach(const char *devargs, uint16_t *port_id);
/**
* Detach a Ethernet device specified by port identifier.
@@ -1836,7 +1933,7 @@ int rte_eth_dev_attach(const char *devargs, uint8_t *port_id);
* @return
* 0 on success and devname is filled, negative on error
*/
-int rte_eth_dev_detach(uint8_t port_id, char *devname);
+int rte_eth_dev_detach(uint16_t port_id, char *devname);
/**
* Convert a numerical speed in Mbps to a bitmap flag that can be used in
@@ -1870,6 +1967,9 @@ uint32_t rte_eth_speed_bitflag(uint32_t speed, int duplex);
* each statically configurable offload hardware feature provided by
* Ethernet devices, such as IP checksum or VLAN tag stripping for
* example.
+ * The Rx offload bitfield API is obsolete and will be deprecated.
+ * Applications should set the ignore_bitfield_offloads bit on *rxmode*
+ * structure and use offloads field to set per-port offloads instead.
* - the Receive Side Scaling (RSS) configuration when using multiple RX
* queues per port.
*
@@ -1880,7 +1980,7 @@ uint32_t rte_eth_speed_bitflag(uint32_t speed, int duplex);
* - 0: Success, device configured.
* - <0: Error code returned by the driver configuration function.
*/
-int rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_queue,
+int rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_queue,
uint16_t nb_tx_queue, const struct rte_eth_conf *eth_conf);
/**
@@ -1923,6 +2023,8 @@ void _rte_eth_dev_reset(struct rte_eth_dev *dev);
* The *rx_conf* structure contains an *rx_thresh* structure with the values
* of the Prefetch, Host, and Write-Back threshold registers of the receive
* ring.
+ * In addition it contains the hardware offloads features to activate using
+ * the DEV_RX_OFFLOAD_* flags.
* @param mb_pool
* The pointer to the memory pool from which to allocate *rte_mbuf* network
* memory buffers to populate each descriptor of the receive ring.
@@ -1935,7 +2037,7 @@ void _rte_eth_dev_reset(struct rte_eth_dev *dev);
* allocate network memory buffers from the memory pool when
* initializing receive descriptors.
*/
-int rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
+int rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
uint16_t nb_rx_desc, unsigned int socket_id,
const struct rte_eth_rxconf *rx_conf,
struct rte_mempool *mb_pool);
@@ -1976,6 +2078,11 @@ int rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
* - The *txq_flags* member contains flags to pass to the TX queue setup
* function to configure the behavior of the TX queue. This should be set
* to 0 if no special configuration is required.
+ * This API is obsolete and will be deprecated. Applications
+ * should set it to ETH_TXQ_FLAGS_IGNORE and use
+ * the offloads field below.
+ * - The *offloads* member contains Tx offloads to be enabled.
+ * Offloads which are not set cannot be used on the datapath.
*
* Note that setting *tx_free_thresh* or *tx_rs_thresh* value to 0 forces
* the transmit function to use default values.
@@ -1983,7 +2090,7 @@ int rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
* - 0: Success, the transmit queue is correctly set up.
* - -ENOMEM: Unable to allocate the transmit ring descriptors.
*/
-int rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id,
+int rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,
uint16_t nb_tx_desc, unsigned int socket_id,
const struct rte_eth_txconf *tx_conf);
@@ -1997,7 +2104,7 @@ int rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id,
* a default of zero if the socket could not be determined.
* -1 is returned is the port_id value is out of range.
*/
-int rte_eth_dev_socket_id(uint8_t port_id);
+int rte_eth_dev_socket_id(uint16_t port_id);
/**
* Check if port_id of device is attached
@@ -2008,7 +2115,7 @@ int rte_eth_dev_socket_id(uint8_t port_id);
* - 0 if port is out of range or not attached
* - 1 if device is attached
*/
-int rte_eth_dev_is_valid_port(uint8_t port_id);
+int rte_eth_dev_is_valid_port(uint16_t port_id);
/**
* Start specified RX queue of a port. It is used when rx_deferred_start
@@ -2025,7 +2132,7 @@ int rte_eth_dev_is_valid_port(uint8_t port_id);
* - -EINVAL: The port_id or the queue_id out of range.
* - -ENOTSUP: The function not supported in PMD driver.
*/
-int rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id);
+int rte_eth_dev_rx_queue_start(uint16_t port_id, uint16_t rx_queue_id);
/**
* Stop specified RX queue of a port
@@ -2041,7 +2148,7 @@ int rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id);
* - -EINVAL: The port_id or the queue_id out of range.
* - -ENOTSUP: The function not supported in PMD driver.
*/
-int rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id);
+int rte_eth_dev_rx_queue_stop(uint16_t port_id, uint16_t rx_queue_id);
/**
* Start TX for specified queue of a port. It is used when tx_deferred_start
@@ -2058,7 +2165,7 @@ int rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id);
* - -EINVAL: The port_id or the queue_id out of range.
* - -ENOTSUP: The function not supported in PMD driver.
*/
-int rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id);
+int rte_eth_dev_tx_queue_start(uint16_t port_id, uint16_t tx_queue_id);
/**
* Stop specified TX queue of a port
@@ -2074,7 +2181,7 @@ int rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id);
* - -EINVAL: The port_id or the queue_id out of range.
* - -ENOTSUP: The function not supported in PMD driver.
*/
-int rte_eth_dev_tx_queue_stop(uint8_t port_id, uint16_t tx_queue_id);
+int rte_eth_dev_tx_queue_stop(uint16_t port_id, uint16_t tx_queue_id);
@@ -2093,7 +2200,7 @@ int rte_eth_dev_tx_queue_stop(uint8_t port_id, uint16_t tx_queue_id);
* - 0: Success, Ethernet device started.
* - <0: Error code of the driver device start function.
*/
-int rte_eth_dev_start(uint8_t port_id);
+int rte_eth_dev_start(uint16_t port_id);
/**
* Stop an Ethernet device. The device can be restarted with a call to
@@ -2102,7 +2209,7 @@ int rte_eth_dev_start(uint8_t port_id);
* @param port_id
* The port identifier of the Ethernet device.
*/
-void rte_eth_dev_stop(uint8_t port_id);
+void rte_eth_dev_stop(uint16_t port_id);
/**
@@ -2117,7 +2224,7 @@ void rte_eth_dev_stop(uint8_t port_id);
* - 0: Success, Ethernet device linked up.
* - <0: Error code of the driver device link up function.
*/
-int rte_eth_dev_set_link_up(uint8_t port_id);
+int rte_eth_dev_set_link_up(uint16_t port_id);
/**
* Link down an Ethernet device.
@@ -2128,7 +2235,7 @@ int rte_eth_dev_set_link_up(uint8_t port_id);
* @param port_id
* The port identifier of the Ethernet device.
*/
-int rte_eth_dev_set_link_down(uint8_t port_id);
+int rte_eth_dev_set_link_down(uint16_t port_id);
/**
* Close a stopped Ethernet device. The device cannot be restarted!
@@ -2138,7 +2245,46 @@ int rte_eth_dev_set_link_down(uint8_t port_id);
* @param port_id
* The port identifier of the Ethernet device.
*/
-void rte_eth_dev_close(uint8_t port_id);
+void rte_eth_dev_close(uint16_t port_id);
+
+/**
+ * Reset a Ethernet device and keep its port id.
+ *
+ * When a port has to be reset passively, the DPDK application can invoke
+ * this function. For example when a PF is reset, all its VFs should also
+ * be reset. Normally a DPDK application can invoke this function when
+ * RTE_ETH_EVENT_INTR_RESET event is detected, but can also use it to start
+ * a port reset in other circumstances.
+ *
+ * When this function is called, it first stops the port and then calls the
+ * PMD specific dev_uninit( ) and dev_init( ) to return the port to initial
+ * state, in which no Tx and Rx queues are setup, as if the port has been
+ * reset and not started. The port keeps the port id it had before the
+ * function call.
+ *
+ * After calling rte_eth_dev_reset( ), the application should use
+ * rte_eth_dev_configure( ), rte_eth_rx_queue_setup( ),
+ * rte_eth_tx_queue_setup( ), and rte_eth_dev_start( )
+ * to reconfigure the device as appropriate.
+ *
+ * Note: To avoid unexpected behavior, the application should stop calling
+ * Tx and Rx functions before calling rte_eth_dev_reset( ). For thread
+ * safety, all these controlling functions should be called from the same
+ * thread.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-EINVAL) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support this function.
+ * - (-EPERM) if not ran from the primary process.
+ * - (-EIO) if re-initialisation failed.
+ * - (-ENOMEM) if the reset failed due to OOM.
+ * - (-EAGAIN) if the reset temporarily failed and should be retried later.
+ */
+int rte_eth_dev_reset(uint16_t port_id);
/**
* Enable receipt in promiscuous mode for an Ethernet device.
@@ -2146,7 +2292,7 @@ void rte_eth_dev_close(uint8_t port_id);
* @param port_id
* The port identifier of the Ethernet device.
*/
-void rte_eth_promiscuous_enable(uint8_t port_id);
+void rte_eth_promiscuous_enable(uint16_t port_id);
/**
* Disable receipt in promiscuous mode for an Ethernet device.
@@ -2154,7 +2300,7 @@ void rte_eth_promiscuous_enable(uint8_t port_id);
* @param port_id
* The port identifier of the Ethernet device.
*/
-void rte_eth_promiscuous_disable(uint8_t port_id);
+void rte_eth_promiscuous_disable(uint16_t port_id);
/**
* Return the value of promiscuous mode for an Ethernet device.
@@ -2166,7 +2312,7 @@ void rte_eth_promiscuous_disable(uint8_t port_id);
* - (0) if promiscuous is disabled.
* - (-1) on error
*/
-int rte_eth_promiscuous_get(uint8_t port_id);
+int rte_eth_promiscuous_get(uint16_t port_id);
/**
* Enable the receipt of any multicast frame by an Ethernet device.
@@ -2174,7 +2320,7 @@ int rte_eth_promiscuous_get(uint8_t port_id);
* @param port_id
* The port identifier of the Ethernet device.
*/
-void rte_eth_allmulticast_enable(uint8_t port_id);
+void rte_eth_allmulticast_enable(uint16_t port_id);
/**
* Disable the receipt of all multicast frames by an Ethernet device.
@@ -2182,7 +2328,7 @@ void rte_eth_allmulticast_enable(uint8_t port_id);
* @param port_id
* The port identifier of the Ethernet device.
*/
-void rte_eth_allmulticast_disable(uint8_t port_id);
+void rte_eth_allmulticast_disable(uint16_t port_id);
/**
* Return the value of allmulticast mode for an Ethernet device.
@@ -2194,7 +2340,7 @@ void rte_eth_allmulticast_disable(uint8_t port_id);
* - (0) if allmulticast is disabled.
* - (-1) on error
*/
-int rte_eth_allmulticast_get(uint8_t port_id);
+int rte_eth_allmulticast_get(uint16_t port_id);
/**
* Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX
@@ -2207,7 +2353,7 @@ int rte_eth_allmulticast_get(uint8_t port_id);
* A pointer to an *rte_eth_link* structure to be filled with
* the status, the speed and the mode of the Ethernet device link.
*/
-void rte_eth_link_get(uint8_t port_id, struct rte_eth_link *link);
+void rte_eth_link_get(uint16_t port_id, struct rte_eth_link *link);
/**
* Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX
@@ -2220,7 +2366,7 @@ void rte_eth_link_get(uint8_t port_id, struct rte_eth_link *link);
* A pointer to an *rte_eth_link* structure to be filled with
* the status, the speed and the mode of the Ethernet device link.
*/
-void rte_eth_link_get_nowait(uint8_t port_id, struct rte_eth_link *link);
+void rte_eth_link_get_nowait(uint16_t port_id, struct rte_eth_link *link);
/**
* Retrieve the general I/O statistics of an Ethernet device.
@@ -2239,15 +2385,19 @@ void rte_eth_link_get_nowait(uint8_t port_id, struct rte_eth_link *link);
* @return
* Zero if successful. Non-zero otherwise.
*/
-int rte_eth_stats_get(uint8_t port_id, struct rte_eth_stats *stats);
+int rte_eth_stats_get(uint16_t port_id, struct rte_eth_stats *stats);
/**
* Reset the general I/O statistics of an Ethernet device.
*
* @param port_id
* The port identifier of the Ethernet device.
+ * @return
+ * - (0) if device notified to reset stats.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
*/
-void rte_eth_stats_reset(uint8_t port_id);
+int rte_eth_stats_reset(uint16_t port_id);
/**
* Retrieve names of extended statistics of an Ethernet device.
@@ -2269,7 +2419,7 @@ void rte_eth_stats_reset(uint8_t port_id);
* shall not be used by the caller.
* - A negative value on error (invalid port id).
*/
-int rte_eth_xstats_get_names(uint8_t port_id,
+int rte_eth_xstats_get_names(uint16_t port_id,
struct rte_eth_xstat_name *xstats_names,
unsigned int size);
@@ -2295,7 +2445,7 @@ int rte_eth_xstats_get_names(uint8_t port_id,
* shall not be used by the caller.
* - A negative value on error (invalid port id).
*/
-int rte_eth_xstats_get(uint8_t port_id, struct rte_eth_xstat *xstats,
+int rte_eth_xstats_get(uint16_t port_id, struct rte_eth_xstat *xstats,
unsigned int n);
/**
@@ -2321,7 +2471,7 @@ int rte_eth_xstats_get(uint8_t port_id, struct rte_eth_xstat *xstats,
* - A negative value on error (invalid port id).
*/
int
-rte_eth_xstats_get_names_by_id(uint8_t port_id,
+rte_eth_xstats_get_names_by_id(uint16_t port_id,
struct rte_eth_xstat_name *xstats_names, unsigned int size,
uint64_t *ids);
@@ -2333,23 +2483,23 @@ rte_eth_xstats_get_names_by_id(uint8_t port_id,
* @param ids
* A pointer to an ids array passed by application. This tells which
* statistics values function should retrieve. This parameter
- * can be set to NULL if n is 0. In this case function will retrieve
+ * can be set to NULL if size is 0. In this case function will retrieve
* all avalible statistics.
* @param values
* A pointer to a table to be filled with device statistics values.
- * @param n
+ * @param size
* The size of the ids array (number of elements).
* @return
- * - A positive value lower or equal to n: success. The return value
+ * - A positive value lower or equal to size: success. The return value
* is the number of entries filled in the stats table.
- * - A positive value higher than n: error, the given statistics table
+ * - A positive value higher than size: error, the given statistics table
* is too small. The return value corresponds to the size that should
* be given to succeed. The entries in the table are not valid and
* shall not be used by the caller.
* - A negative value on error (invalid port id).
*/
-int rte_eth_xstats_get_by_id(uint8_t port_id, const uint64_t *ids,
- uint64_t *values, unsigned int n);
+int rte_eth_xstats_get_by_id(uint16_t port_id, const uint64_t *ids,
+ uint64_t *values, unsigned int size);
/**
* Gets the ID of a statistic from its name.
@@ -2368,7 +2518,7 @@ int rte_eth_xstats_get_by_id(uint8_t port_id, const uint64_t *ids,
* -ENODEV for invalid port_id,
* -EINVAL if the xstat_name doesn't exist in port_id
*/
-int rte_eth_xstats_get_id_by_name(uint8_t port_id, const char *xstat_name,
+int rte_eth_xstats_get_id_by_name(uint16_t port_id, const char *xstat_name,
uint64_t *id);
/**
@@ -2377,7 +2527,7 @@ int rte_eth_xstats_get_id_by_name(uint8_t port_id, const char *xstat_name,
* @param port_id
* The port identifier of the Ethernet device.
*/
-void rte_eth_xstats_reset(uint8_t port_id);
+void rte_eth_xstats_reset(uint16_t port_id);
/**
* Set a mapping for the specified transmit queue to the specified per-queue
@@ -2396,7 +2546,7 @@ void rte_eth_xstats_reset(uint8_t port_id);
* @return
* Zero if successful. Non-zero otherwise.
*/
-int rte_eth_dev_set_tx_queue_stats_mapping(uint8_t port_id,
+int rte_eth_dev_set_tx_queue_stats_mapping(uint16_t port_id,
uint16_t tx_queue_id, uint8_t stat_idx);
/**
@@ -2416,7 +2566,7 @@ int rte_eth_dev_set_tx_queue_stats_mapping(uint8_t port_id,
* @return
* Zero if successful. Non-zero otherwise.
*/
-int rte_eth_dev_set_rx_queue_stats_mapping(uint8_t port_id,
+int rte_eth_dev_set_rx_queue_stats_mapping(uint16_t port_id,
uint16_t rx_queue_id,
uint8_t stat_idx);
@@ -2429,7 +2579,7 @@ int rte_eth_dev_set_rx_queue_stats_mapping(uint8_t port_id,
* A pointer to a structure of type *ether_addr* to be filled with
* the Ethernet address of the Ethernet device.
*/
-void rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr);
+void rte_eth_macaddr_get(uint16_t port_id, struct ether_addr *mac_addr);
/**
* Retrieve the contextual information of an Ethernet device.
@@ -2440,7 +2590,7 @@ void rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr);
* A pointer to a structure of type *rte_eth_dev_info* to be filled with
* the contextual information of the Ethernet device.
*/
-void rte_eth_dev_info_get(uint8_t port_id, struct rte_eth_dev_info *dev_info);
+void rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info);
/**
* Retrieve the firmware version of a device.
@@ -2460,7 +2610,7 @@ void rte_eth_dev_info_get(uint8_t port_id, struct rte_eth_dev_info *dev_info);
* - (>0) if *fw_size* is not enough to store firmware version, return
* the size of the non truncated string.
*/
-int rte_eth_dev_fw_version_get(uint8_t port_id,
+int rte_eth_dev_fw_version_get(uint16_t port_id,
char *fw_version, size_t fw_size);
/**
@@ -2501,7 +2651,7 @@ int rte_eth_dev_fw_version_get(uint8_t port_id,
* count of supported ptypes will be returned.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_dev_get_supported_ptypes(uint8_t port_id, uint32_t ptype_mask,
+int rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
uint32_t *ptypes, int num);
/**
@@ -2515,7 +2665,7 @@ int rte_eth_dev_get_supported_ptypes(uint8_t port_id, uint32_t ptype_mask,
* - (0) if successful.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu);
+int rte_eth_dev_get_mtu(uint16_t port_id, uint16_t *mtu);
/**
* Change the MTU of an Ethernet device.
@@ -2531,7 +2681,7 @@ int rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu);
* - (-EINVAL) if *mtu* invalid.
* - (-EBUSY) if operation is not allowed when the port is running
*/
-int rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu);
+int rte_eth_dev_set_mtu(uint16_t port_id, uint16_t mtu);
/**
* Enable/Disable hardware filtering by an Ethernet device of received
@@ -2551,7 +2701,7 @@ int rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu);
* - (-ENOSYS) if VLAN filtering on *port_id* disabled.
* - (-EINVAL) if *vlan_id* > 4095.
*/
-int rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on);
+int rte_eth_dev_vlan_filter(uint16_t port_id, uint16_t vlan_id, int on);
/**
* Enable/Disable hardware VLAN Strip by a rx queue of an Ethernet device.
@@ -2572,7 +2722,7 @@ int rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on);
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if *rx_queue_id* invalid.
*/
-int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id,
+int rte_eth_dev_set_vlan_strip_on_queue(uint16_t port_id, uint16_t rx_queue_id,
int on);
/**
@@ -2591,7 +2741,7 @@ int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id,
* - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_dev_set_vlan_ether_type(uint8_t port_id,
+int rte_eth_dev_set_vlan_ether_type(uint16_t port_id,
enum rte_vlan_type vlan_type,
uint16_t tag_type);
@@ -2615,7 +2765,7 @@ int rte_eth_dev_set_vlan_ether_type(uint8_t port_id,
* - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask);
+int rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask);
/**
* Read VLAN Offload configuration from an Ethernet device
@@ -2629,7 +2779,7 @@ int rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask);
* ETH_VLAN_EXTEND_OFFLOAD
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_dev_get_vlan_offload(uint8_t port_id);
+int rte_eth_dev_get_vlan_offload(uint16_t port_id);
/**
* Set port based TX VLAN insertion on or off.
@@ -2645,7 +2795,7 @@ int rte_eth_dev_get_vlan_offload(uint8_t port_id);
* - (0) if successful.
* - negative if failed.
*/
-int rte_eth_dev_set_vlan_pvid(uint8_t port_id, uint16_t pvid, int on);
+int rte_eth_dev_set_vlan_pvid(uint16_t port_id, uint16_t pvid, int on);
/**
*
@@ -2730,7 +2880,7 @@ int rte_eth_dev_set_vlan_pvid(uint8_t port_id, uint16_t pvid, int on);
* *rx_pkts* array.
*/
static inline uint16_t
-rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id,
+rte_eth_rx_burst(uint16_t port_id, uint16_t queue_id,
struct rte_mbuf **rx_pkts, const uint16_t nb_pkts)
{
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
@@ -2775,7 +2925,7 @@ rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id,
* (-ENOTSUP) if the device does not support this function
*/
static inline int
-rte_eth_rx_queue_count(uint8_t port_id, uint16_t queue_id)
+rte_eth_rx_queue_count(uint16_t port_id, uint16_t queue_id)
{
struct rte_eth_dev *dev;
@@ -2804,7 +2954,7 @@ rte_eth_rx_queue_count(uint8_t port_id, uint16_t queue_id)
* - (-ENOTSUP) if the device does not support this function
*/
static inline int
-rte_eth_rx_descriptor_done(uint8_t port_id, uint16_t queue_id, uint16_t offset)
+rte_eth_rx_descriptor_done(uint16_t port_id, uint16_t queue_id, uint16_t offset)
{
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
@@ -2851,7 +3001,7 @@ rte_eth_rx_descriptor_done(uint8_t port_id, uint16_t queue_id, uint16_t offset)
* - (-ENODEV) bad port or queue (only if compiled with debug).
*/
static inline int
-rte_eth_rx_descriptor_status(uint8_t port_id, uint16_t queue_id,
+rte_eth_rx_descriptor_status(uint16_t port_id, uint16_t queue_id,
uint16_t offset)
{
struct rte_eth_dev *dev;
@@ -2908,7 +3058,7 @@ rte_eth_rx_descriptor_status(uint8_t port_id, uint16_t queue_id,
* - (-ENOTSUP) if the device does not support this function.
* - (-ENODEV) bad port or queue (only if compiled with debug).
*/
-static inline int rte_eth_tx_descriptor_status(uint8_t port_id,
+static inline int rte_eth_tx_descriptor_status(uint16_t port_id,
uint16_t queue_id, uint16_t offset)
{
struct rte_eth_dev *dev;
@@ -2992,7 +3142,7 @@ static inline int rte_eth_tx_descriptor_status(uint8_t port_id,
* *tx_pkts* parameter when the transmit ring is full or has been filled up.
*/
static inline uint16_t
-rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
+rte_eth_tx_burst(uint16_t port_id, uint16_t queue_id,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
{
struct rte_eth_dev *dev = &rte_eth_devices[port_id];
@@ -3081,7 +3231,7 @@ rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
#ifndef RTE_ETHDEV_TX_PREPARE_NOOP
static inline uint16_t
-rte_eth_tx_prepare(uint8_t port_id, uint16_t queue_id,
+rte_eth_tx_prepare(uint16_t port_id, uint16_t queue_id,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
{
struct rte_eth_dev *dev;
@@ -3123,7 +3273,8 @@ rte_eth_tx_prepare(uint8_t port_id, uint16_t queue_id,
*/
static inline uint16_t
-rte_eth_tx_prepare(__rte_unused uint8_t port_id, __rte_unused uint16_t queue_id,
+rte_eth_tx_prepare(__rte_unused uint16_t port_id,
+ __rte_unused uint16_t queue_id,
__rte_unused struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
{
return nb_pkts;
@@ -3192,7 +3343,7 @@ rte_eth_tx_buffer_init(struct rte_eth_dev_tx_buffer *buffer, uint16_t size);
* callback is called for any packets which could not be sent.
*/
static inline uint16_t
-rte_eth_tx_buffer_flush(uint8_t port_id, uint16_t queue_id,
+rte_eth_tx_buffer_flush(uint16_t port_id, uint16_t queue_id,
struct rte_eth_dev_tx_buffer *buffer)
{
uint16_t sent;
@@ -3244,7 +3395,7 @@ rte_eth_tx_buffer_flush(uint8_t port_id, uint16_t queue_id,
* the rest.
*/
static __rte_always_inline uint16_t
-rte_eth_tx_buffer(uint8_t port_id, uint16_t queue_id,
+rte_eth_tx_buffer(uint16_t port_id, uint16_t queue_id,
struct rte_eth_dev_tx_buffer *buffer, struct rte_mbuf *tx_pkt)
{
buffer->pkts[buffer->length++] = tx_pkt;
@@ -3360,7 +3511,7 @@ rte_eth_tx_buffer_count_callback(struct rte_mbuf **pkts, uint16_t unsent,
* are in use.
*/
int
-rte_eth_tx_done_cleanup(uint8_t port_id, uint16_t queue_id, uint32_t free_cnt);
+rte_eth_tx_done_cleanup(uint16_t port_id, uint16_t queue_id, uint32_t free_cnt);
/**
* The eth device event type for interrupt, and maybe others in the future.
@@ -3378,7 +3529,7 @@ enum rte_eth_event_type {
RTE_ETH_EVENT_MAX /**< max value of this enum */
};
-typedef int (*rte_eth_dev_cb_fn)(uint8_t port_id,
+typedef int (*rte_eth_dev_cb_fn)(uint16_t port_id,
enum rte_eth_event_type event, void *cb_arg, void *ret_param);
/**< user application callback to be registered for interrupts */
@@ -3400,7 +3551,7 @@ typedef int (*rte_eth_dev_cb_fn)(uint8_t port_id,
* - On success, zero.
* - On failure, a negative value.
*/
-int rte_eth_dev_callback_register(uint8_t port_id,
+int rte_eth_dev_callback_register(uint16_t port_id,
enum rte_eth_event_type event,
rte_eth_dev_cb_fn cb_fn, void *cb_arg);
@@ -3421,7 +3572,7 @@ int rte_eth_dev_callback_register(uint8_t port_id,
* - On success, zero.
* - On failure, a negative value.
*/
-int rte_eth_dev_callback_unregister(uint8_t port_id,
+int rte_eth_dev_callback_unregister(uint16_t port_id,
enum rte_eth_event_type event,
rte_eth_dev_cb_fn cb_fn, void *cb_arg);
@@ -3467,7 +3618,7 @@ int _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
* that operation.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_dev_rx_intr_enable(uint8_t port_id, uint16_t queue_id);
+int rte_eth_dev_rx_intr_enable(uint16_t port_id, uint16_t queue_id);
/**
* When lcore wakes up from rx interrupt indicating packet coming, disable rx
@@ -3488,7 +3639,7 @@ int rte_eth_dev_rx_intr_enable(uint8_t port_id, uint16_t queue_id);
* that operation.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_dev_rx_intr_disable(uint8_t port_id, uint16_t queue_id);
+int rte_eth_dev_rx_intr_disable(uint16_t port_id, uint16_t queue_id);
/**
* RX Interrupt control per port.
@@ -3507,7 +3658,7 @@ int rte_eth_dev_rx_intr_disable(uint8_t port_id, uint16_t queue_id);
* - On success, zero.
* - On failure, a negative value.
*/
-int rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data);
+int rte_eth_dev_rx_intr_ctl(uint16_t port_id, int epfd, int op, void *data);
/**
* RX Interrupt control per queue.
@@ -3530,7 +3681,7 @@ int rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data);
* - On success, zero.
* - On failure, a negative value.
*/
-int rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
+int rte_eth_dev_rx_intr_ctl_q(uint16_t port_id, uint16_t queue_id,
int epfd, int op, void *data);
/**
@@ -3545,7 +3696,7 @@ int rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
* that operation.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_led_on(uint8_t port_id);
+int rte_eth_led_on(uint16_t port_id);
/**
* Turn off the LED on the Ethernet device.
@@ -3559,7 +3710,7 @@ int rte_eth_led_on(uint8_t port_id);
* that operation.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_led_off(uint8_t port_id);
+int rte_eth_led_off(uint16_t port_id);
/**
* Get current status of the Ethernet link flow control for Ethernet device
@@ -3573,7 +3724,7 @@ int rte_eth_led_off(uint8_t port_id);
* - (-ENOTSUP) if hardware doesn't support flow control.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_dev_flow_ctrl_get(uint8_t port_id,
+int rte_eth_dev_flow_ctrl_get(uint16_t port_id,
struct rte_eth_fc_conf *fc_conf);
/**
@@ -3590,7 +3741,7 @@ int rte_eth_dev_flow_ctrl_get(uint8_t port_id,
* - (-EINVAL) if bad parameter
* - (-EIO) if flow control setup failure
*/
-int rte_eth_dev_flow_ctrl_set(uint8_t port_id,
+int rte_eth_dev_flow_ctrl_set(uint16_t port_id,
struct rte_eth_fc_conf *fc_conf);
/**
@@ -3608,7 +3759,7 @@ int rte_eth_dev_flow_ctrl_set(uint8_t port_id,
* - (-EINVAL) if bad parameter
* - (-EIO) if flow control setup failure
*/
-int rte_eth_dev_priority_flow_ctrl_set(uint8_t port_id,
+int rte_eth_dev_priority_flow_ctrl_set(uint16_t port_id,
struct rte_eth_pfc_conf *pfc_conf);
/**
@@ -3629,7 +3780,7 @@ int rte_eth_dev_priority_flow_ctrl_set(uint8_t port_id,
* - (-ENOSPC) if no more MAC addresses can be added.
* - (-EINVAL) if MAC address is invalid.
*/
-int rte_eth_dev_mac_addr_add(uint8_t port, struct ether_addr *mac_addr,
+int rte_eth_dev_mac_addr_add(uint16_t port, struct ether_addr *mac_addr,
uint32_t pool);
/**
@@ -3645,7 +3796,7 @@ int rte_eth_dev_mac_addr_add(uint8_t port, struct ether_addr *mac_addr,
* - (-ENODEV) if *port* invalid.
* - (-EADDRINUSE) if attempting to remove the default MAC address
*/
-int rte_eth_dev_mac_addr_remove(uint8_t port, struct ether_addr *mac_addr);
+int rte_eth_dev_mac_addr_remove(uint16_t port, struct ether_addr *mac_addr);
/**
* Set the default MAC address.
@@ -3660,8 +3811,8 @@ int rte_eth_dev_mac_addr_remove(uint8_t port, struct ether_addr *mac_addr);
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if MAC address is invalid.
*/
-int rte_eth_dev_default_mac_addr_set(uint8_t port, struct ether_addr *mac_addr);
-
+int rte_eth_dev_default_mac_addr_set(uint16_t port,
+ struct ether_addr *mac_addr);
/**
* Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
@@ -3678,7 +3829,7 @@ int rte_eth_dev_default_mac_addr_set(uint8_t port, struct ether_addr *mac_addr);
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_dev_rss_reta_update(uint8_t port,
+int rte_eth_dev_rss_reta_update(uint16_t port,
struct rte_eth_rss_reta_entry64 *reta_conf,
uint16_t reta_size);
@@ -3697,7 +3848,7 @@ int rte_eth_dev_rss_reta_update(uint8_t port,
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_dev_rss_reta_query(uint8_t port,
+int rte_eth_dev_rss_reta_query(uint16_t port,
struct rte_eth_rss_reta_entry64 *reta_conf,
uint16_t reta_size);
@@ -3719,8 +3870,8 @@ int rte_eth_dev_rss_reta_query(uint8_t port,
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_dev_uc_hash_table_set(uint8_t port,struct ether_addr *addr,
- uint8_t on);
+int rte_eth_dev_uc_hash_table_set(uint16_t port, struct ether_addr *addr,
+ uint8_t on);
/**
* Updates all unicast hash bitmaps for receiving packet with any Unicast
@@ -3739,7 +3890,7 @@ int rte_eth_dev_uc_hash_table_set(uint8_t port,struct ether_addr *addr,
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on);
+int rte_eth_dev_uc_all_hash_table_set(uint16_t port, uint8_t on);
/**
* Set a traffic mirroring rule on an Ethernet device
@@ -3762,7 +3913,7 @@ int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on);
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if the mr_conf information is not correct.
*/
-int rte_eth_mirror_rule_set(uint8_t port_id,
+int rte_eth_mirror_rule_set(uint16_t port_id,
struct rte_eth_mirror_conf *mirror_conf,
uint8_t rule_id,
uint8_t on);
@@ -3780,7 +3931,7 @@ int rte_eth_mirror_rule_set(uint8_t port_id,
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_mirror_rule_reset(uint8_t port_id,
+int rte_eth_mirror_rule_reset(uint16_t port_id,
uint8_t rule_id);
/**
@@ -3798,7 +3949,7 @@ int rte_eth_mirror_rule_reset(uint8_t port_id,
* - (-ENODEV) if *port_id* invalid.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
+int rte_eth_set_queue_rate_limit(uint16_t port_id, uint16_t queue_idx,
uint16_t tx_rate);
/**
@@ -3814,7 +3965,7 @@ int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
* - (-ENOTSUP) if hardware doesn't support.
* - (-EINVAL) if bad parameter.
*/
-int rte_eth_dev_rss_hash_update(uint8_t port_id,
+int rte_eth_dev_rss_hash_update(uint16_t port_id,
struct rte_eth_rss_conf *rss_conf);
/**
@@ -3831,7 +3982,7 @@ int rte_eth_dev_rss_hash_update(uint8_t port_id,
* - (-ENOTSUP) if hardware doesn't support RSS.
*/
int
-rte_eth_dev_rss_hash_conf_get(uint8_t port_id,
+rte_eth_dev_rss_hash_conf_get(uint16_t port_id,
struct rte_eth_rss_conf *rss_conf);
/**
@@ -3852,7 +4003,7 @@ rte_eth_dev_rss_hash_conf_get(uint8_t port_id,
* - (-ENOTSUP) if hardware doesn't support tunnel type.
*/
int
-rte_eth_dev_udp_tunnel_port_add(uint8_t port_id,
+rte_eth_dev_udp_tunnel_port_add(uint16_t port_id,
struct rte_eth_udp_tunnel *tunnel_udp);
/**
@@ -3874,7 +4025,7 @@ rte_eth_dev_udp_tunnel_port_add(uint8_t port_id,
* - (-ENOTSUP) if hardware doesn't support tunnel type.
*/
int
-rte_eth_dev_udp_tunnel_port_delete(uint8_t port_id,
+rte_eth_dev_udp_tunnel_port_delete(uint16_t port_id,
struct rte_eth_udp_tunnel *tunnel_udp);
/**
@@ -3890,7 +4041,8 @@ rte_eth_dev_udp_tunnel_port_delete(uint8_t port_id,
* - (-ENOTSUP) if hardware doesn't support this filter type.
* - (-ENODEV) if *port_id* invalid.
*/
-int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type);
+int rte_eth_dev_filter_supported(uint16_t port_id,
+ enum rte_filter_type filter_type);
/**
* Take operations to assigned filter type on an Ethernet device.
@@ -3910,7 +4062,7 @@ int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_ty
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
+int rte_eth_dev_filter_ctrl(uint16_t port_id, enum rte_filter_type filter_type,
enum rte_filter_op filter_op, void *arg);
/**
@@ -3925,7 +4077,7 @@ int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
* - (-ENODEV) if port identifier is invalid.
* - (-ENOTSUP) if hardware doesn't support.
*/
-int rte_eth_dev_get_dcb_info(uint8_t port_id,
+int rte_eth_dev_get_dcb_info(uint16_t port_id,
struct rte_eth_dcb_info *dcb_info);
/**
@@ -3952,7 +4104,7 @@ int rte_eth_dev_get_dcb_info(uint8_t port_id,
* NULL on error.
* On success, a pointer value which can later be used to remove the callback.
*/
-void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id,
+void *rte_eth_add_rx_callback(uint16_t port_id, uint16_t queue_id,
rte_rx_callback_fn fn, void *user_param);
/**
@@ -3980,7 +4132,7 @@ void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id,
* NULL on error.
* On success, a pointer value which can later be used to remove the callback.
*/
-void *rte_eth_add_first_rx_callback(uint8_t port_id, uint16_t queue_id,
+void *rte_eth_add_first_rx_callback(uint16_t port_id, uint16_t queue_id,
rte_rx_callback_fn fn, void *user_param);
/**
@@ -4007,7 +4159,7 @@ void *rte_eth_add_first_rx_callback(uint8_t port_id, uint16_t queue_id,
* NULL on error.
* On success, a pointer value which can later be used to remove the callback.
*/
-void *rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id,
+void *rte_eth_add_tx_callback(uint16_t port_id, uint16_t queue_id,
rte_tx_callback_fn fn, void *user_param);
/**
@@ -4040,7 +4192,7 @@ void *rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id,
* - -EINVAL: The port_id or the queue_id is out of range, or the callback
* is NULL or not found for the port/queue.
*/
-int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id,
+int rte_eth_remove_rx_callback(uint16_t port_id, uint16_t queue_id,
struct rte_eth_rxtx_callback *user_cb);
/**
@@ -4073,7 +4225,7 @@ int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id,
* - -EINVAL: The port_id or the queue_id is out of range, or the callback
* is NULL or not found for the port/queue.
*/
-int rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id,
+int rte_eth_remove_tx_callback(uint16_t port_id, uint16_t queue_id,
struct rte_eth_rxtx_callback *user_cb);
/**
@@ -4093,7 +4245,7 @@ int rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id,
* - -ENOTSUP: routine is not supported by the device PMD.
* - -EINVAL: The port_id or the queue_id is out of range.
*/
-int rte_eth_rx_queue_info_get(uint8_t port_id, uint16_t queue_id,
+int rte_eth_rx_queue_info_get(uint16_t port_id, uint16_t queue_id,
struct rte_eth_rxq_info *qinfo);
/**
@@ -4113,7 +4265,7 @@ int rte_eth_rx_queue_info_get(uint8_t port_id, uint16_t queue_id,
* - -ENOTSUP: routine is not supported by the device PMD.
* - -EINVAL: The port_id or the queue_id is out of range.
*/
-int rte_eth_tx_queue_info_get(uint8_t port_id, uint16_t queue_id,
+int rte_eth_tx_queue_info_get(uint16_t port_id, uint16_t queue_id,
struct rte_eth_txq_info *qinfo);
/**
@@ -4132,7 +4284,7 @@ int rte_eth_tx_queue_info_get(uint8_t port_id, uint16_t queue_id,
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_eth_dev_get_reg_info(uint8_t port_id, struct rte_dev_reg_info *info);
+int rte_eth_dev_get_reg_info(uint16_t port_id, struct rte_dev_reg_info *info);
/**
* Retrieve size of device EEPROM
@@ -4145,7 +4297,7 @@ int rte_eth_dev_get_reg_info(uint8_t port_id, struct rte_dev_reg_info *info);
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_eth_dev_get_eeprom_length(uint8_t port_id);
+int rte_eth_dev_get_eeprom_length(uint16_t port_id);
/**
* Retrieve EEPROM and EEPROM attribute
@@ -4161,7 +4313,7 @@ int rte_eth_dev_get_eeprom_length(uint8_t port_id);
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_eth_dev_get_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info);
+int rte_eth_dev_get_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info);
/**
* Program EEPROM with provided data
@@ -4177,7 +4329,7 @@ int rte_eth_dev_get_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info);
* - (-ENODEV) if *port_id* invalid.
* - others depends on the specific operations implementation.
*/
-int rte_eth_dev_set_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info);
+int rte_eth_dev_set_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info);
/**
* Set the list of multicast addresses to filter on an Ethernet device.
@@ -4196,7 +4348,7 @@ int rte_eth_dev_set_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info);
* - (-ENOTSUP) if PMD of *port_id* doesn't support multicast filtering.
* - (-ENOSPC) if *port_id* has not enough multicast filtering resources.
*/
-int rte_eth_dev_set_mc_addr_list(uint8_t port_id,
+int rte_eth_dev_set_mc_addr_list(uint16_t port_id,
struct ether_addr *mc_addr_set,
uint32_t nb_mc_addr);
@@ -4211,7 +4363,7 @@ int rte_eth_dev_set_mc_addr_list(uint8_t port_id,
* - -ENODEV: The port ID is invalid.
* - -ENOTSUP: The function is not supported by the Ethernet driver.
*/
-int rte_eth_timesync_enable(uint8_t port_id);
+int rte_eth_timesync_enable(uint16_t port_id);
/**
* Disable IEEE1588/802.1AS timestamping for an Ethernet device.
@@ -4224,7 +4376,7 @@ int rte_eth_timesync_enable(uint8_t port_id);
* - -ENODEV: The port ID is invalid.
* - -ENOTSUP: The function is not supported by the Ethernet driver.
*/
-int rte_eth_timesync_disable(uint8_t port_id);
+int rte_eth_timesync_disable(uint16_t port_id);
/**
* Read an IEEE1588/802.1AS RX timestamp from an Ethernet device.
@@ -4243,7 +4395,7 @@ int rte_eth_timesync_disable(uint8_t port_id);
* - -ENODEV: The port ID is invalid.
* - -ENOTSUP: The function is not supported by the Ethernet driver.
*/
-int rte_eth_timesync_read_rx_timestamp(uint8_t port_id,
+int rte_eth_timesync_read_rx_timestamp(uint16_t port_id,
struct timespec *timestamp, uint32_t flags);
/**
@@ -4260,7 +4412,7 @@ int rte_eth_timesync_read_rx_timestamp(uint8_t port_id,
* - -ENODEV: The port ID is invalid.
* - -ENOTSUP: The function is not supported by the Ethernet driver.
*/
-int rte_eth_timesync_read_tx_timestamp(uint8_t port_id,
+int rte_eth_timesync_read_tx_timestamp(uint16_t port_id,
struct timespec *timestamp);
/**
@@ -4279,7 +4431,7 @@ int rte_eth_timesync_read_tx_timestamp(uint8_t port_id,
* - -ENODEV: The port ID is invalid.
* - -ENOTSUP: The function is not supported by the Ethernet driver.
*/
-int rte_eth_timesync_adjust_time(uint8_t port_id, int64_t delta);
+int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta);
/**
* Read the time from the timesync clock on an Ethernet device.
@@ -4295,7 +4447,7 @@ int rte_eth_timesync_adjust_time(uint8_t port_id, int64_t delta);
* @return
* - 0: Success.
*/
-int rte_eth_timesync_read_time(uint8_t port_id, struct timespec *time);
+int rte_eth_timesync_read_time(uint16_t port_id, struct timespec *time);
/**
* Set the time of the timesync clock on an Ethernet device.
@@ -4314,7 +4466,7 @@ int rte_eth_timesync_read_time(uint8_t port_id, struct timespec *time);
* - -ENODEV: The port ID is invalid.
* - -ENOTSUP: The function is not supported by the Ethernet driver.
*/
-int rte_eth_timesync_write_time(uint8_t port_id, const struct timespec *time);
+int rte_eth_timesync_write_time(uint16_t port_id, const struct timespec *time);
/**
* Create memzone for HW rings.
@@ -4355,7 +4507,7 @@ rte_eth_dma_zone_reserve(const struct rte_eth_dev *eth_dev, const char *name,
* - (-ENOTSUP) if hardware doesn't support tunnel type.
*/
int
-rte_eth_dev_l2_tunnel_eth_type_conf(uint8_t port_id,
+rte_eth_dev_l2_tunnel_eth_type_conf(uint16_t port_id,
struct rte_eth_l2_tunnel_conf *l2_tunnel);
/**
@@ -4382,7 +4534,7 @@ rte_eth_dev_l2_tunnel_eth_type_conf(uint8_t port_id,
* - (-ENOTSUP) if hardware doesn't support tunnel type.
*/
int
-rte_eth_dev_l2_tunnel_offload_set(uint8_t port_id,
+rte_eth_dev_l2_tunnel_offload_set(uint16_t port_id,
struct rte_eth_l2_tunnel_conf *l2_tunnel,
uint32_t mask,
uint8_t en);
@@ -4400,7 +4552,7 @@ rte_eth_dev_l2_tunnel_offload_set(uint8_t port_id,
* - (-ENODEV or -EINVAL) on failure.
*/
int
-rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id);
+rte_eth_dev_get_port_by_name(const char *name, uint16_t *port_id);
/**
* Get the device name from port id
@@ -4414,7 +4566,7 @@ rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id);
* - (-EINVAL) on failure.
*/
int
-rte_eth_dev_get_name_by_port(uint8_t port_id, char *name);
+rte_eth_dev_get_name_by_port(uint16_t port_id, char *name);
/**
* Check that numbers of Rx and Tx descriptors satisfy descriptors limits from
@@ -4432,10 +4584,28 @@ rte_eth_dev_get_name_by_port(uint8_t port_id, char *name);
* - (0) if successful.
* - (-ENOTSUP, -ENODEV or -EINVAL) on failure.
*/
-int rte_eth_dev_adjust_nb_rx_tx_desc(uint8_t port_id,
+int rte_eth_dev_adjust_nb_rx_tx_desc(uint16_t port_id,
uint16_t *nb_rx_desc,
uint16_t *nb_tx_desc);
+
+/**
+ * Test if a port supports specific mempool ops.
+ *
+ * @param port_id
+ * Port identifier of the Ethernet device.
+ * @param [in] pool
+ * The name of the pool operations to test.
+ * @return
+ * - 0: best mempool ops choice for this port.
+ * - 1: mempool ops are supported for this port.
+ * - -ENOTSUP: mempool ops not supported for this port.
+ * - -ENODEV: Invalid port Identifier.
+ * - -EINVAL: Pool param is null.
+ */
+int
+rte_eth_dev_pool_ops_supported(uint16_t port_id, const char *pool);
+
#ifdef __cplusplus
}
#endif