summaryrefslogtreecommitdiffstats
path: root/lib/librte_ether/rte_tm.h
diff options
context:
space:
mode:
Diffstat (limited to 'lib/librte_ether/rte_tm.h')
-rw-r--r--lib/librte_ether/rte_tm.h1912
1 files changed, 1912 insertions, 0 deletions
diff --git a/lib/librte_ether/rte_tm.h b/lib/librte_ether/rte_tm.h
new file mode 100644
index 00000000..ebbfa1ee
--- /dev/null
+++ b/lib/librte_ether/rte_tm.h
@@ -0,0 +1,1912 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation.
+ * Copyright(c) 2017 Cavium.
+ * Copyright(c) 2017 NXP.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __INCLUDE_RTE_TM_H__
+#define __INCLUDE_RTE_TM_H__
+
+/**
+ * @file
+ * RTE Generic Traffic Manager API
+ *
+ * This interface provides the ability to configure the traffic manager in a
+ * generic way. It includes features such as: hierarchical scheduling,
+ * traffic shaping, congestion management, packet marking, etc.
+ *
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ */
+
+#include <stdint.h>
+
+#include <rte_common.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Ethernet framing overhead.
+ *
+ * Overhead fields per Ethernet frame:
+ * 1. Preamble: 7 bytes;
+ * 2. Start of Frame Delimiter (SFD): 1 byte;
+ * 3. Inter-Frame Gap (IFG): 12 bytes.
+ *
+ * One of the typical values for the *pkt_length_adjust* field of the shaper
+ * profile.
+ *
+ * @see struct rte_tm_shaper_params
+ */
+#define RTE_TM_ETH_FRAMING_OVERHEAD 20
+
+/**
+ * Ethernet framing overhead including the Frame Check Sequence (FCS) field.
+ * Useful when FCS is generated and added at the end of the Ethernet frame on
+ * TX side without any SW intervention.
+ *
+ * One of the typical values for the pkt_length_adjust field of the shaper
+ * profile.
+ *
+ * @see struct rte_tm_shaper_params
+ */
+#define RTE_TM_ETH_FRAMING_OVERHEAD_FCS 24
+
+/**
+ * Invalid WRED profile ID.
+ *
+ * @see struct rte_tm_node_params
+ * @see rte_tm_node_add()
+ * @see rte_tm_node_wred_context_update()
+ */
+#define RTE_TM_WRED_PROFILE_ID_NONE UINT32_MAX
+
+/**
+ *Invalid shaper profile ID.
+ *
+ * @see struct rte_tm_node_params
+ * @see rte_tm_node_add()
+ * @see rte_tm_node_shaper_update()
+ */
+#define RTE_TM_SHAPER_PROFILE_ID_NONE UINT32_MAX
+
+/**
+ * Node ID for the parent of the root node.
+ *
+ * @see rte_tm_node_add()
+ */
+#define RTE_TM_NODE_ID_NULL UINT32_MAX
+
+/**
+ * Node level ID used to disable level ID checking.
+ *
+ * @see rte_tm_node_add()
+ */
+#define RTE_TM_NODE_LEVEL_ID_ANY UINT32_MAX
+
+/**
+ * Color
+ */
+enum rte_tm_color {
+ RTE_TM_GREEN = 0, /**< Green */
+ RTE_TM_YELLOW, /**< Yellow */
+ RTE_TM_RED, /**< Red */
+ RTE_TM_COLORS /**< Number of colors */
+};
+
+/**
+ * Node statistics counter type
+ */
+enum rte_tm_stats_type {
+ /** Number of packets scheduled from current node. */
+ RTE_TM_STATS_N_PKTS = 1 << 0,
+
+ /** Number of bytes scheduled from current node. */
+ RTE_TM_STATS_N_BYTES = 1 << 1,
+
+ /** Number of green packets dropped by current leaf node. */
+ RTE_TM_STATS_N_PKTS_GREEN_DROPPED = 1 << 2,
+
+ /** Number of yellow packets dropped by current leaf node. */
+ RTE_TM_STATS_N_PKTS_YELLOW_DROPPED = 1 << 3,
+
+ /** Number of red packets dropped by current leaf node. */
+ RTE_TM_STATS_N_PKTS_RED_DROPPED = 1 << 4,
+
+ /** Number of green bytes dropped by current leaf node. */
+ RTE_TM_STATS_N_BYTES_GREEN_DROPPED = 1 << 5,
+
+ /** Number of yellow bytes dropped by current leaf node. */
+ RTE_TM_STATS_N_BYTES_YELLOW_DROPPED = 1 << 6,
+
+ /** Number of red bytes dropped by current leaf node. */
+ RTE_TM_STATS_N_BYTES_RED_DROPPED = 1 << 7,
+
+ /** Number of packets currently waiting in the packet queue of current
+ * leaf node.
+ */
+ RTE_TM_STATS_N_PKTS_QUEUED = 1 << 8,
+
+ /** Number of bytes currently waiting in the packet queue of current
+ * leaf node.
+ */
+ RTE_TM_STATS_N_BYTES_QUEUED = 1 << 9,
+};
+
+/**
+ * Node statistics counters
+ */
+struct rte_tm_node_stats {
+ /** Number of packets scheduled from current node. */
+ uint64_t n_pkts;
+
+ /** Number of bytes scheduled from current node. */
+ uint64_t n_bytes;
+
+ /** Statistics counters for leaf nodes only. */
+ struct {
+ /** Number of packets dropped by current leaf node per each
+ * color.
+ */
+ uint64_t n_pkts_dropped[RTE_TM_COLORS];
+
+ /** Number of bytes dropped by current leaf node per each
+ * color.
+ */
+ uint64_t n_bytes_dropped[RTE_TM_COLORS];
+
+ /** Number of packets currently waiting in the packet queue of
+ * current leaf node.
+ */
+ uint64_t n_pkts_queued;
+
+ /** Number of bytes currently waiting in the packet queue of
+ * current leaf node.
+ */
+ uint64_t n_bytes_queued;
+ } leaf;
+};
+
+/**
+ * Traffic manager dynamic updates
+ */
+enum rte_tm_dynamic_update_type {
+ /** Dynamic parent node update. The new parent node is located on same
+ * hierarchy level as the former parent node. Consequently, the node
+ * whose parent is changed preserves its hierarchy level.
+ */
+ RTE_TM_UPDATE_NODE_PARENT_KEEP_LEVEL = 1 << 0,
+
+ /** Dynamic parent node update. The new parent node is located on
+ * different hierarchy level than the former parent node. Consequently,
+ * the node whose parent is changed also changes its hierarchy level.
+ */
+ RTE_TM_UPDATE_NODE_PARENT_CHANGE_LEVEL = 1 << 1,
+
+ /** Dynamic node add/delete. */
+ RTE_TM_UPDATE_NODE_ADD_DELETE = 1 << 2,
+
+ /** Suspend/resume nodes. */
+ RTE_TM_UPDATE_NODE_SUSPEND_RESUME = 1 << 3,
+
+ /** Dynamic switch between byte-based and packet-based WFQ weights. */
+ RTE_TM_UPDATE_NODE_WFQ_WEIGHT_MODE = 1 << 4,
+
+ /** Dynamic update on number of SP priorities. */
+ RTE_TM_UPDATE_NODE_N_SP_PRIORITIES = 1 << 5,
+
+ /** Dynamic update of congestion management mode for leaf nodes. */
+ RTE_TM_UPDATE_NODE_CMAN = 1 << 6,
+
+ /** Dynamic update of the set of enabled stats counter types. */
+ RTE_TM_UPDATE_NODE_STATS = 1 << 7,
+};
+
+/**
+ * Traffic manager capabilities
+ */
+struct rte_tm_capabilities {
+ /** Maximum number of nodes. */
+ uint32_t n_nodes_max;
+
+ /** Maximum number of levels (i.e. number of nodes connecting the root
+ * node with any leaf node, including the root and the leaf).
+ */
+ uint32_t n_levels_max;
+
+ /** When non-zero, this flag indicates that all the non-leaf nodes
+ * (with the exception of the root node) have identical capability set.
+ */
+ int non_leaf_nodes_identical;
+
+ /** When non-zero, this flag indicates that all the leaf nodes have
+ * identical capability set.
+ */
+ int leaf_nodes_identical;
+
+ /** Maximum number of shapers, either private or shared. In case the
+ * implementation does not share any resources between private and
+ * shared shapers, it is typically equal to the sum of
+ * *shaper_private_n_max* and *shaper_shared_n_max*. The
+ * value of zero indicates that traffic shaping is not supported.
+ */
+ uint32_t shaper_n_max;
+
+ /** Maximum number of private shapers. Indicates the maximum number of
+ * nodes that can concurrently have their private shaper enabled. The
+ * value of zero indicates that private shapers are not supported.
+ */
+ uint32_t shaper_private_n_max;
+
+ /** Maximum number of private shapers that support dual rate shaping.
+ * Indicates the maximum number of nodes that can concurrently have
+ * their private shaper enabled with dual rate support. Only valid when
+ * private shapers are supported. The value of zero indicates that dual
+ * rate shaping is not available for private shapers. The maximum value
+ * is *shaper_private_n_max*.
+ */
+ int shaper_private_dual_rate_n_max;
+
+ /** Minimum committed/peak rate (bytes per second) for any private
+ * shaper. Valid only when private shapers are supported.
+ */
+ uint64_t shaper_private_rate_min;
+
+ /** Maximum committed/peak rate (bytes per second) for any private
+ * shaper. Valid only when private shapers are supported.
+ */
+ uint64_t shaper_private_rate_max;
+
+ /** Maximum number of shared shapers. The value of zero indicates that
+ * shared shapers are not supported.
+ */
+ uint32_t shaper_shared_n_max;
+
+ /** Maximum number of nodes that can share the same shared shaper.
+ * Only valid when shared shapers are supported.
+ */
+ uint32_t shaper_shared_n_nodes_per_shaper_max;
+
+ /** Maximum number of shared shapers a node can be part of. This
+ * parameter indicates that there is at least one node that can be
+ * configured with this many shared shapers, which might not be true for
+ * all the nodes. Only valid when shared shapers are supported, in which
+ * case it ranges from 1 to *shaper_shared_n_max*.
+ */
+ uint32_t shaper_shared_n_shapers_per_node_max;
+
+ /** Maximum number of shared shapers that can be configured with dual
+ * rate shaping. The value of zero indicates that dual rate shaping
+ * support is not available for shared shapers.
+ */
+ uint32_t shaper_shared_dual_rate_n_max;
+
+ /** Minimum committed/peak rate (bytes per second) for any shared
+ * shaper. Only valid when shared shapers are supported.
+ */
+ uint64_t shaper_shared_rate_min;
+
+ /** Maximum committed/peak rate (bytes per second) for any shared
+ * shaper. Only valid when shared shapers are supported.
+ */
+ uint64_t shaper_shared_rate_max;
+
+ /** Minimum value allowed for packet length adjustment for any private
+ * or shared shaper.
+ */
+ int shaper_pkt_length_adjust_min;
+
+ /** Maximum value allowed for packet length adjustment for any private
+ * or shared shaper.
+ */
+ int shaper_pkt_length_adjust_max;
+
+ /** Maximum number of children nodes. This parameter indicates that
+ * there is at least one non-leaf node that can be configured with this
+ * many children nodes, which might not be true for all the non-leaf
+ * nodes.
+ */
+ uint32_t sched_n_children_max;
+
+ /** Maximum number of supported priority levels. This parameter
+ * indicates that there is at least one non-leaf node that can be
+ * configured with this many priority levels for managing its children
+ * nodes, which might not be true for all the non-leaf nodes. The value
+ * of zero is invalid. The value of 1 indicates that only priority 0 is
+ * supported, which essentially means that Strict Priority (SP)
+ * algorithm is not supported.
+ */
+ uint32_t sched_sp_n_priorities_max;
+
+ /** Maximum number of sibling nodes that can have the same priority at
+ * any given time, i.e. maximum size of the WFQ sibling node group. This
+ * parameter indicates there is at least one non-leaf node that meets
+ * this condition, which might not be true for all the non-leaf nodes.
+ * The value of zero is invalid. The value of 1 indicates that WFQ
+ * algorithm is not supported. The maximum value is
+ * *sched_n_children_max*.
+ */
+ uint32_t sched_wfq_n_children_per_group_max;
+
+ /** Maximum number of priority levels that can have more than one child
+ * node at any given time, i.e. maximum number of WFQ sibling node
+ * groups that have two or more members. This parameter indicates there
+ * is at least one non-leaf node that meets this condition, which might
+ * not be true for all the non-leaf nodes. The value of zero states that
+ * WFQ algorithm is not supported. The value of 1 indicates that
+ * (*sched_sp_n_priorities_max* - 1) priority levels have at most one
+ * child node, so there can be only one priority level with two or
+ * more sibling nodes making up a WFQ group. The maximum value is:
+ * min(floor(*sched_n_children_max* / 2), *sched_sp_n_priorities_max*).
+ */
+ uint32_t sched_wfq_n_groups_max;
+
+ /** Maximum WFQ weight. The value of 1 indicates that all sibling nodes
+ * with same priority have the same WFQ weight, so WFQ is reduced to FQ.
+ */
+ uint32_t sched_wfq_weight_max;
+
+ /** Head drop algorithm support. When non-zero, this parameter
+ * indicates that there is at least one leaf node that supports the head
+ * drop algorithm, which might not be true for all the leaf nodes.
+ */
+ int cman_head_drop_supported;
+
+ /** Maximum number of WRED contexts, either private or shared. In case
+ * the implementation does not share any resources between private and
+ * shared WRED contexts, it is typically equal to the sum of
+ * *cman_wred_context_private_n_max* and
+ * *cman_wred_context_shared_n_max*. The value of zero indicates that
+ * WRED is not supported.
+ */
+ uint32_t cman_wred_context_n_max;
+
+ /** Maximum number of private WRED contexts. Indicates the maximum
+ * number of leaf nodes that can concurrently have their private WRED
+ * context enabled. The value of zero indicates that private WRED
+ * contexts are not supported.
+ */
+ uint32_t cman_wred_context_private_n_max;
+
+ /** Maximum number of shared WRED contexts. The value of zero
+ * indicates that shared WRED contexts are not supported.
+ */
+ uint32_t cman_wred_context_shared_n_max;
+
+ /** Maximum number of leaf nodes that can share the same WRED context.
+ * Only valid when shared WRED contexts are supported.
+ */
+ uint32_t cman_wred_context_shared_n_nodes_per_context_max;
+
+ /** Maximum number of shared WRED contexts a leaf node can be part of.
+ * This parameter indicates that there is at least one leaf node that
+ * can be configured with this many shared WRED contexts, which might
+ * not be true for all the leaf nodes. Only valid when shared WRED
+ * contexts are supported, in which case it ranges from 1 to
+ * *cman_wred_context_shared_n_max*.
+ */
+ uint32_t cman_wred_context_shared_n_contexts_per_node_max;
+
+ /** Support for VLAN DEI packet marking (per color). */
+ int mark_vlan_dei_supported[RTE_TM_COLORS];
+
+ /** Support for IPv4/IPv6 ECN marking of TCP packets (per color). */
+ int mark_ip_ecn_tcp_supported[RTE_TM_COLORS];
+
+ /** Support for IPv4/IPv6 ECN marking of SCTP packets (per color). */
+ int mark_ip_ecn_sctp_supported[RTE_TM_COLORS];
+
+ /** Support for IPv4/IPv6 DSCP packet marking (per color). */
+ int mark_ip_dscp_supported[RTE_TM_COLORS];
+
+ /** Set of supported dynamic update operations.
+ * @see enum rte_tm_dynamic_update_type
+ */
+ uint64_t dynamic_update_mask;
+
+ /** Set of supported statistics counter types.
+ * @see enum rte_tm_stats_type
+ */
+ uint64_t stats_mask;
+};
+
+/**
+ * Traffic manager level capabilities
+ */
+struct rte_tm_level_capabilities {
+ /** Maximum number of nodes for the current hierarchy level. */
+ uint32_t n_nodes_max;
+
+ /** Maximum number of non-leaf nodes for the current hierarchy level.
+ * The value of 0 indicates that current level only supports leaf
+ * nodes. The maximum value is *n_nodes_max*.
+ */
+ uint32_t n_nodes_nonleaf_max;
+
+ /** Maximum number of leaf nodes for the current hierarchy level. The
+ * value of 0 indicates that current level only supports non-leaf
+ * nodes. The maximum value is *n_nodes_max*.
+ */
+ uint32_t n_nodes_leaf_max;
+
+ /** When non-zero, this flag indicates that all the non-leaf nodes on
+ * this level have identical capability set. Valid only when
+ * *n_nodes_nonleaf_max* is non-zero.
+ */
+ int non_leaf_nodes_identical;
+
+ /** When non-zero, this flag indicates that all the leaf nodes on this
+ * level have identical capability set. Valid only when
+ * *n_nodes_leaf_max* is non-zero.
+ */
+ int leaf_nodes_identical;
+
+ RTE_STD_C11
+ union {
+ /** Items valid only for the non-leaf nodes on this level. */
+ struct {
+ /** Private shaper support. When non-zero, it indicates
+ * there is at least one non-leaf node on this level
+ * with private shaper support, which may not be the
+ * case for all the non-leaf nodes on this level.
+ */
+ int shaper_private_supported;
+
+ /** Dual rate support for private shaper. Valid only
+ * when private shaper is supported for the non-leaf
+ * nodes on the current level. When non-zero, it
+ * indicates there is at least one non-leaf node on this
+ * level with dual rate private shaper support, which
+ * may not be the case for all the non-leaf nodes on
+ * this level.
+ */
+ int shaper_private_dual_rate_supported;
+
+ /** Minimum committed/peak rate (bytes per second) for
+ * private shapers of the non-leaf nodes of this level.
+ * Valid only when private shaper is supported on this
+ * level.
+ */
+ uint64_t shaper_private_rate_min;
+
+ /** Maximum committed/peak rate (bytes per second) for
+ * private shapers of the non-leaf nodes on this level.
+ * Valid only when private shaper is supported on this
+ * level.
+ */
+ uint64_t shaper_private_rate_max;
+
+ /** Maximum number of shared shapers that any non-leaf
+ * node on this level can be part of. The value of zero
+ * indicates that shared shapers are not supported by
+ * the non-leaf nodes on this level. When non-zero, it
+ * indicates there is at least one non-leaf node on this
+ * level that meets this condition, which may not be the
+ * case for all the non-leaf nodes on this level.
+ */
+ uint32_t shaper_shared_n_max;
+
+ /** Maximum number of children nodes. This parameter
+ * indicates that there is at least one non-leaf node on
+ * this level that can be configured with this many
+ * children nodes, which might not be true for all the
+ * non-leaf nodes on this level.
+ */
+ uint32_t sched_n_children_max;
+
+ /** Maximum number of supported priority levels. This
+ * parameter indicates that there is at least one
+ * non-leaf node on this level that can be configured
+ * with this many priority levels for managing its
+ * children nodes, which might not be true for all the
+ * non-leaf nodes on this level. The value of zero is
+ * invalid. The value of 1 indicates that only priority
+ * 0 is supported, which essentially means that Strict
+ * Priority (SP) algorithm is not supported on this
+ * level.
+ */
+ uint32_t sched_sp_n_priorities_max;
+
+ /** Maximum number of sibling nodes that can have the
+ * same priority at any given time, i.e. maximum size of
+ * the WFQ sibling node group. This parameter indicates
+ * there is at least one non-leaf node on this level
+ * that meets this condition, which may not be true for
+ * all the non-leaf nodes on this level. The value of
+ * zero is invalid. The value of 1 indicates that WFQ
+ * algorithm is not supported on this level. The maximum
+ * value is *sched_n_children_max*.
+ */
+ uint32_t sched_wfq_n_children_per_group_max;
+
+ /** Maximum number of priority levels that can have
+ * more than one child node at any given time, i.e.
+ * maximum number of WFQ sibling node groups that
+ * have two or more members. This parameter indicates
+ * there is at least one non-leaf node on this level
+ * that meets this condition, which might not be true
+ * for all the non-leaf nodes. The value of zero states
+ * that WFQ algorithm is not supported on this level.
+ * The value of 1 indicates that
+ * (*sched_sp_n_priorities_max* - 1) priority levels on
+ * this level have at most one child node, so there can
+ * be only one priority level with two or more sibling
+ * nodes making up a WFQ group on this level. The
+ * maximum value is:
+ * min(floor(*sched_n_children_max* / 2),
+ * *sched_sp_n_priorities_max*).
+ */
+ uint32_t sched_wfq_n_groups_max;
+
+ /** Maximum WFQ weight. The value of 1 indicates that
+ * all sibling nodes on this level with same priority
+ * have the same WFQ weight, so on this level WFQ is
+ * reduced to FQ.
+ */
+ uint32_t sched_wfq_weight_max;
+
+ /** Mask of statistics counter types supported by the
+ * non-leaf nodes on this level. Every supported
+ * statistics counter type is supported by at least one
+ * non-leaf node on this level, which may not be true
+ * for all the non-leaf nodes on this level.
+ * @see enum rte_tm_stats_type
+ */
+ uint64_t stats_mask;
+ } nonleaf;
+
+ /** Items valid only for the leaf nodes on this level. */
+ struct {
+ /** Private shaper support. When non-zero, it indicates
+ * there is at least one leaf node on this level with
+ * private shaper support, which may not be the case for
+ * all the leaf nodes on this level.
+ */
+ int shaper_private_supported;
+
+ /** Dual rate support for private shaper. Valid only
+ * when private shaper is supported for the leaf nodes
+ * on this level. When non-zero, it indicates there is
+ * at least one leaf node on this level with dual rate
+ * private shaper support, which may not be the case for
+ * all the leaf nodes on this level.
+ */
+ int shaper_private_dual_rate_supported;
+
+ /** Minimum committed/peak rate (bytes per second) for
+ * private shapers of the leaf nodes of this level.
+ * Valid only when private shaper is supported for the
+ * leaf nodes on this level.
+ */
+ uint64_t shaper_private_rate_min;
+
+ /** Maximum committed/peak rate (bytes per second) for
+ * private shapers of the leaf nodes on this level.
+ * Valid only when private shaper is supported for the
+ * leaf nodes on this level.
+ */
+ uint64_t shaper_private_rate_max;
+
+ /** Maximum number of shared shapers that any leaf node
+ * on this level can be part of. The value of zero
+ * indicates that shared shapers are not supported by
+ * the leaf nodes on this level. When non-zero, it
+ * indicates there is at least one leaf node on this
+ * level that meets this condition, which may not be the
+ * case for all the leaf nodes on this level.
+ */
+ uint32_t shaper_shared_n_max;
+
+ /** Head drop algorithm support. When non-zero, this
+ * parameter indicates that there is at least one leaf
+ * node on this level that supports the head drop
+ * algorithm, which might not be true for all the leaf
+ * nodes on this level.
+ */
+ int cman_head_drop_supported;
+
+ /** Private WRED context support. When non-zero, it
+ * indicates there is at least one node on this level
+ * with private WRED context support, which may not be
+ * true for all the leaf nodes on this level.
+ */
+ int cman_wred_context_private_supported;
+
+ /** Maximum number of shared WRED contexts that any
+ * leaf node on this level can be part of. The value of
+ * zero indicates that shared WRED contexts are not
+ * supported by the leaf nodes on this level. When
+ * non-zero, it indicates there is at least one leaf
+ * node on this level that meets this condition, which
+ * may not be the case for all the leaf nodes on this
+ * level.
+ */
+ uint32_t cman_wred_context_shared_n_max;
+
+ /** Mask of statistics counter types supported by the
+ * leaf nodes on this level. Every supported statistics
+ * counter type is supported by at least one leaf node
+ * on this level, which may not be true for all the leaf
+ * nodes on this level.
+ * @see enum rte_tm_stats_type
+ */
+ uint64_t stats_mask;
+ } leaf;
+ };
+};
+
+/**
+ * Traffic manager node capabilities
+ */
+struct rte_tm_node_capabilities {
+ /** Private shaper support for the current node. */
+ int shaper_private_supported;
+
+ /** Dual rate shaping support for private shaper of current node.
+ * Valid only when private shaper is supported by the current node.
+ */
+ int shaper_private_dual_rate_supported;
+
+ /** Minimum committed/peak rate (bytes per second) for private
+ * shaper of current node. Valid only when private shaper is supported
+ * by the current node.
+ */
+ uint64_t shaper_private_rate_min;
+
+ /** Maximum committed/peak rate (bytes per second) for private
+ * shaper of current node. Valid only when private shaper is supported
+ * by the current node.
+ */
+ uint64_t shaper_private_rate_max;
+
+ /** Maximum number of shared shapers the current node can be part of.
+ * The value of zero indicates that shared shapers are not supported by
+ * the current node.
+ */
+ uint32_t shaper_shared_n_max;
+
+ RTE_STD_C11
+ union {
+ /** Items valid only for non-leaf nodes. */
+ struct {
+ /** Maximum number of children nodes. */
+ uint32_t sched_n_children_max;
+
+ /** Maximum number of supported priority levels. The
+ * value of zero is invalid. The value of 1 indicates
+ * that only priority 0 is supported, which essentially
+ * means that Strict Priority (SP) algorithm is not
+ * supported.
+ */
+ uint32_t sched_sp_n_priorities_max;
+
+ /** Maximum number of sibling nodes that can have the
+ * same priority at any given time, i.e. maximum size
+ * of the WFQ sibling node group. The value of zero
+ * is invalid. The value of 1 indicates that WFQ
+ * algorithm is not supported. The maximum value is
+ * *sched_n_children_max*.
+ */
+ uint32_t sched_wfq_n_children_per_group_max;
+
+ /** Maximum number of priority levels that can have
+ * more than one child node at any given time, i.e.
+ * maximum number of WFQ sibling node groups that have
+ * two or more members. The value of zero states that
+ * WFQ algorithm is not supported. The value of 1
+ * indicates that (*sched_sp_n_priorities_max* - 1)
+ * priority levels have at most one child node, so there
+ * can be only one priority level with two or more
+ * sibling nodes making up a WFQ group. The maximum
+ * value is: min(floor(*sched_n_children_max* / 2),
+ * *sched_sp_n_priorities_max*).
+ */
+ uint32_t sched_wfq_n_groups_max;
+
+ /** Maximum WFQ weight. The value of 1 indicates that
+ * all sibling nodes with same priority have the same
+ * WFQ weight, so WFQ is reduced to FQ.
+ */
+ uint32_t sched_wfq_weight_max;
+ } nonleaf;
+
+ /** Items valid only for leaf nodes. */
+ struct {
+ /** Head drop algorithm support for current node. */
+ int cman_head_drop_supported;
+
+ /** Private WRED context support for current node. */
+ int cman_wred_context_private_supported;
+
+ /** Maximum number of shared WRED contexts the current
+ * node can be part of. The value of zero indicates that
+ * shared WRED contexts are not supported by the current
+ * node.
+ */
+ uint32_t cman_wred_context_shared_n_max;
+ } leaf;
+ };
+
+ /** Mask of statistics counter types supported by the current node.
+ * @see enum rte_tm_stats_type
+ */
+ uint64_t stats_mask;
+};
+
+/**
+ * Congestion management (CMAN) mode
+ *
+ * This is used for controlling the admission of packets into a packet queue or
+ * group of packet queues on congestion. On request of writing a new packet
+ * into the current queue while the queue is full, the *tail drop* algorithm
+ * drops the new packet while leaving the queue unmodified, as opposed to *head
+ * drop* algorithm, which drops the packet at the head of the queue (the oldest
+ * packet waiting in the queue) and admits the new packet at the tail of the
+ * queue.
+ *
+ * The *Random Early Detection (RED)* algorithm works by proactively dropping
+ * more and more input packets as the queue occupancy builds up. When the queue
+ * is full or almost full, RED effectively works as *tail drop*. The *Weighted
+ * RED* algorithm uses a separate set of RED thresholds for each packet color.
+ */
+enum rte_tm_cman_mode {
+ RTE_TM_CMAN_TAIL_DROP = 0, /**< Tail drop */
+ RTE_TM_CMAN_HEAD_DROP, /**< Head drop */
+ RTE_TM_CMAN_WRED, /**< Weighted Random Early Detection (WRED) */
+};
+
+/**
+ * Random Early Detection (RED) profile
+ */
+struct rte_tm_red_params {
+ /** Minimum queue threshold */
+ uint16_t min_th;
+
+ /** Maximum queue threshold */
+ uint16_t max_th;
+
+ /** Inverse of packet marking probability maximum value (maxp), i.e.
+ * maxp_inv = 1 / maxp
+ */
+ uint16_t maxp_inv;
+
+ /** Negated log2 of queue weight (wq), i.e. wq = 1 / (2 ^ wq_log2) */
+ uint16_t wq_log2;
+};
+
+/**
+ * Weighted RED (WRED) profile
+ *
+ * Multiple WRED contexts can share the same WRED profile. Each leaf node with
+ * WRED enabled as its congestion management mode has zero or one private WRED
+ * context (only one leaf node using it) and/or zero, one or several shared
+ * WRED contexts (multiple leaf nodes use the same WRED context). A private
+ * WRED context is used to perform congestion management for a single leaf
+ * node, while a shared WRED context is used to perform congestion management
+ * for a group of leaf nodes.
+ */
+struct rte_tm_wred_params {
+ /** One set of RED parameters per packet color */
+ struct rte_tm_red_params red_params[RTE_TM_COLORS];
+};
+
+/**
+ * Token bucket
+ */
+struct rte_tm_token_bucket {
+ /** Token bucket rate (bytes per second) */
+ uint64_t rate;
+
+ /** Token bucket size (bytes), a.k.a. max burst size */
+ uint64_t size;
+};
+
+/**
+ * Shaper (rate limiter) profile
+ *
+ * Multiple shaper instances can share the same shaper profile. Each node has
+ * zero or one private shaper (only one node using it) and/or zero, one or
+ * several shared shapers (multiple nodes use the same shaper instance).
+ * A private shaper is used to perform traffic shaping for a single node, while
+ * a shared shaper is used to perform traffic shaping for a group of nodes.
+ *
+ * Single rate shapers use a single token bucket. A single rate shaper can be
+ * configured by setting the rate of the committed bucket to zero, which
+ * effectively disables this bucket. The peak bucket is used to limit the rate
+ * and the burst size for the current shaper.
+ *
+ * Dual rate shapers use both the committed and the peak token buckets. The
+ * rate of the peak bucket has to be bigger than zero, as well as greater than
+ * or equal to the rate of the committed bucket.
+ */
+struct rte_tm_shaper_params {
+ /** Committed token bucket */
+ struct rte_tm_token_bucket committed;
+
+ /** Peak token bucket */
+ struct rte_tm_token_bucket peak;
+
+ /** Signed value to be added to the length of each packet for the
+ * purpose of shaping. Can be used to correct the packet length with
+ * the framing overhead bytes that are also consumed on the wire (e.g.
+ * RTE_TM_ETH_FRAMING_OVERHEAD_FCS).
+ */
+ int32_t pkt_length_adjust;
+};
+
+/**
+ * Node parameters
+ *
+ * Each non-leaf node has multiple inputs (its children nodes) and single output
+ * (which is input to its parent node). It arbitrates its inputs using Strict
+ * Priority (SP) and Weighted Fair Queuing (WFQ) algorithms to schedule input
+ * packets to its output while observing its shaping (rate limiting)
+ * constraints.
+ *
+ * Algorithms such as Weighted Round Robin (WRR), Byte-level WRR, Deficit WRR
+ * (DWRR), etc. are considered approximations of the WFQ ideal and are
+ * assimilated to WFQ, although an associated implementation-dependent trade-off
+ * on accuracy, performance and resource usage might exist.
+ *
+ * Children nodes with different priorities are scheduled using the SP algorithm
+ * based on their priority, with zero (0) as the highest priority. Children with
+ * the same priority are scheduled using the WFQ algorithm according to their
+ * weights. The WFQ weight of a given child node is relative to the sum of the
+ * weights of all its sibling nodes that have the same priority, with one (1) as
+ * the lowest weight. For each SP priority, the WFQ weight mode can be set as
+ * either byte-based or packet-based.
+ *
+ * Each leaf node sits on top of a TX queue of the current Ethernet port. Hence,
+ * the leaf nodes are predefined, with their node IDs set to 0 .. (N-1), where N
+ * is the number of TX queues configured for the current Ethernet port. The
+ * non-leaf nodes have their IDs generated by the application.
+ */
+struct rte_tm_node_params {
+ /** Shaper profile for the private shaper. The absence of the private
+ * shaper for the current node is indicated by setting this parameter
+ * to RTE_TM_SHAPER_PROFILE_ID_NONE.
+ */
+ uint32_t shaper_profile_id;
+
+ /** User allocated array of valid shared shaper IDs. */
+ uint32_t *shared_shaper_id;
+
+ /** Number of shared shaper IDs in the *shared_shaper_id* array. */
+ uint32_t n_shared_shapers;
+
+ RTE_STD_C11
+ union {
+ /** Parameters only valid for non-leaf nodes. */
+ struct {
+ /** WFQ weight mode for each SP priority. When NULL, it
+ * indicates that WFQ is to be used for all priorities.
+ * When non-NULL, it points to a pre-allocated array of
+ * *n_sp_priorities* values, with non-zero value for
+ * byte-mode and zero for packet-mode.
+ */
+ int *wfq_weight_mode;
+
+ /** Number of SP priorities. */
+ uint32_t n_sp_priorities;
+ } nonleaf;
+
+ /** Parameters only valid for leaf nodes. */
+ struct {
+ /** Congestion management mode */
+ enum rte_tm_cman_mode cman;
+
+ /** WRED parameters (only valid when *cman* is set to
+ * WRED).
+ */
+ struct {
+ /** WRED profile for private WRED context. The
+ * absence of a private WRED context for the
+ * current leaf node is indicated by value
+ * RTE_TM_WRED_PROFILE_ID_NONE.
+ */
+ uint32_t wred_profile_id;
+
+ /** User allocated array of shared WRED context
+ * IDs. When set to NULL, it indicates that the
+ * current leaf node should not currently be
+ * part of any shared WRED contexts.
+ */
+ uint32_t *shared_wred_context_id;
+
+ /** Number of elements in the
+ * *shared_wred_context_id* array. Only valid
+ * when *shared_wred_context_id* is non-NULL,
+ * in which case it should be non-zero.
+ */
+ uint32_t n_shared_wred_contexts;
+ } wred;
+ } leaf;
+ };
+
+ /** Mask of statistics counter types to be enabled for this node. This
+ * needs to be a subset of the statistics counter types available for
+ * the current node. Any statistics counter type not included in this
+ * set is to be disabled for the current node.
+ * @see enum rte_tm_stats_type
+ */
+ uint64_t stats_mask;
+};
+
+/**
+ * Verbose error types.
+ *
+ * Most of them provide the type of the object referenced by struct
+ * rte_tm_error::cause.
+ */
+enum rte_tm_error_type {
+ RTE_TM_ERROR_TYPE_NONE, /**< No error. */
+ RTE_TM_ERROR_TYPE_UNSPECIFIED, /**< Cause unspecified. */
+ RTE_TM_ERROR_TYPE_CAPABILITIES,
+ RTE_TM_ERROR_TYPE_LEVEL_ID,
+ RTE_TM_ERROR_TYPE_WRED_PROFILE,
+ RTE_TM_ERROR_TYPE_WRED_PROFILE_GREEN,
+ RTE_TM_ERROR_TYPE_WRED_PROFILE_YELLOW,
+ RTE_TM_ERROR_TYPE_WRED_PROFILE_RED,
+ RTE_TM_ERROR_TYPE_WRED_PROFILE_ID,
+ RTE_TM_ERROR_TYPE_SHARED_WRED_CONTEXT_ID,
+ RTE_TM_ERROR_TYPE_SHAPER_PROFILE,
+ RTE_TM_ERROR_TYPE_SHAPER_PROFILE_COMMITTED_RATE,
+ RTE_TM_ERROR_TYPE_SHAPER_PROFILE_COMMITTED_SIZE,
+ RTE_TM_ERROR_TYPE_SHAPER_PROFILE_PEAK_RATE,
+ RTE_TM_ERROR_TYPE_SHAPER_PROFILE_PEAK_SIZE,
+ RTE_TM_ERROR_TYPE_SHAPER_PROFILE_PKT_ADJUST_LEN,
+ RTE_TM_ERROR_TYPE_SHAPER_PROFILE_ID,
+ RTE_TM_ERROR_TYPE_SHARED_SHAPER_ID,
+ RTE_TM_ERROR_TYPE_NODE_PARENT_NODE_ID,
+ RTE_TM_ERROR_TYPE_NODE_PRIORITY,
+ RTE_TM_ERROR_TYPE_NODE_WEIGHT,
+ RTE_TM_ERROR_TYPE_NODE_PARAMS,
+ RTE_TM_ERROR_TYPE_NODE_PARAMS_SHAPER_PROFILE_ID,
+ RTE_TM_ERROR_TYPE_NODE_PARAMS_SHARED_SHAPER_ID,
+ RTE_TM_ERROR_TYPE_NODE_PARAMS_N_SHARED_SHAPERS,
+ RTE_TM_ERROR_TYPE_NODE_PARAMS_WFQ_WEIGHT_MODE,
+ RTE_TM_ERROR_TYPE_NODE_PARAMS_N_SP_PRIORITIES,
+ RTE_TM_ERROR_TYPE_NODE_PARAMS_CMAN,
+ RTE_TM_ERROR_TYPE_NODE_PARAMS_WRED_PROFILE_ID,
+ RTE_TM_ERROR_TYPE_NODE_PARAMS_SHARED_WRED_CONTEXT_ID,
+ RTE_TM_ERROR_TYPE_NODE_PARAMS_N_SHARED_WRED_CONTEXTS,
+ RTE_TM_ERROR_TYPE_NODE_PARAMS_STATS,
+ RTE_TM_ERROR_TYPE_NODE_ID,
+};
+
+/**
+ * Verbose error structure definition.
+ *
+ * This object is normally allocated by applications and set by PMDs, the
+ * message points to a constant string which does not need to be freed by
+ * the application, however its pointer can be considered valid only as long
+ * as its associated DPDK port remains configured. Closing the underlying
+ * device or unloading the PMD invalidates it.
+ *
+ * Both cause and message may be NULL regardless of the error type.
+ */
+struct rte_tm_error {
+ enum rte_tm_error_type type; /**< Cause field and error type. */
+ const void *cause; /**< Object responsible for the error. */
+ const char *message; /**< Human-readable error message. */
+};
+
+/**
+ * Traffic manager get number of leaf nodes
+ *
+ * Each leaf node sits on on top of a TX queue of the current Ethernet port.
+ * Therefore, the set of leaf nodes is predefined, their number is always equal
+ * to N (where N is the number of TX queues configured for the current port)
+ * and their IDs are 0 .. (N-1).
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[out] n_leaf_nodes
+ * Number of leaf nodes for the current port.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ */
+int
+rte_tm_get_number_of_leaf_nodes(uint8_t port_id,
+ uint32_t *n_leaf_nodes,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node ID validate and type (i.e. leaf or non-leaf) get
+ *
+ * The leaf nodes have predefined IDs in the range of 0 .. (N-1), where N is
+ * the number of TX queues of the current Ethernet port. The non-leaf nodes
+ * have their IDs generated by the application outside of the above range,
+ * which is reserved for leaf nodes.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID value. Needs to be valid.
+ * @param[out] is_leaf
+ * Set to non-zero value when node is leaf and to zero otherwise (non-leaf).
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ */
+int
+rte_tm_node_type_get(uint8_t port_id,
+ uint32_t node_id,
+ int *is_leaf,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager capabilities get
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[out] cap
+ * Traffic manager capabilities. Needs to be pre-allocated and valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ */
+int
+rte_tm_capabilities_get(uint8_t port_id,
+ struct rte_tm_capabilities *cap,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager level capabilities get
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] level_id
+ * The hierarchy level identifier. The value of 0 identifies the level of the
+ * root node.
+ * @param[out] cap
+ * Traffic manager level capabilities. Needs to be pre-allocated and valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ */
+int
+rte_tm_level_capabilities_get(uint8_t port_id,
+ uint32_t level_id,
+ struct rte_tm_level_capabilities *cap,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node capabilities get
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid.
+ * @param[out] cap
+ * Traffic manager node capabilities. Needs to be pre-allocated and valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ */
+int
+rte_tm_node_capabilities_get(uint8_t port_id,
+ uint32_t node_id,
+ struct rte_tm_node_capabilities *cap,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager WRED profile add
+ *
+ * Create a new WRED profile with ID set to *wred_profile_id*. The new profile
+ * is used to create one or several WRED contexts.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] wred_profile_id
+ * WRED profile ID for the new profile. Needs to be unused.
+ * @param[in] profile
+ * WRED profile parameters. Needs to be pre-allocated and valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::cman_wred_context_n_max
+ */
+int
+rte_tm_wred_profile_add(uint8_t port_id,
+ uint32_t wred_profile_id,
+ struct rte_tm_wred_params *profile,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager WRED profile delete
+ *
+ * Delete an existing WRED profile. This operation fails when there is
+ * currently at least one user (i.e. WRED context) of this WRED profile.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] wred_profile_id
+ * WRED profile ID. Needs to be the valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::cman_wred_context_n_max
+ */
+int
+rte_tm_wred_profile_delete(uint8_t port_id,
+ uint32_t wred_profile_id,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager shared WRED context add or update
+ *
+ * When *shared_wred_context_id* is invalid, a new WRED context with this ID is
+ * created by using the WRED profile identified by *wred_profile_id*.
+ *
+ * When *shared_wred_context_id* is valid, this WRED context is no longer using
+ * the profile previously assigned to it and is updated to use the profile
+ * identified by *wred_profile_id*.
+ *
+ * A valid shared WRED context can be assigned to several hierarchy leaf nodes
+ * configured to use WRED as the congestion management mode.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] shared_wred_context_id
+ * Shared WRED context ID
+ * @param[in] wred_profile_id
+ * WRED profile ID. Needs to be the valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::cman_wred_context_shared_n_max
+ */
+int
+rte_tm_shared_wred_context_add_update(uint8_t port_id,
+ uint32_t shared_wred_context_id,
+ uint32_t wred_profile_id,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager shared WRED context delete
+ *
+ * Delete an existing shared WRED context. This operation fails when there is
+ * currently at least one user (i.e. hierarchy leaf node) of this shared WRED
+ * context.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] shared_wred_context_id
+ * Shared WRED context ID. Needs to be the valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::cman_wred_context_shared_n_max
+ */
+int
+rte_tm_shared_wred_context_delete(uint8_t port_id,
+ uint32_t shared_wred_context_id,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager shaper profile add
+ *
+ * Create a new shaper profile with ID set to *shaper_profile_id*. The new
+ * shaper profile is used to create one or several shapers.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] shaper_profile_id
+ * Shaper profile ID for the new profile. Needs to be unused.
+ * @param[in] profile
+ * Shaper profile parameters. Needs to be pre-allocated and valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::shaper_n_max
+ */
+int
+rte_tm_shaper_profile_add(uint8_t port_id,
+ uint32_t shaper_profile_id,
+ struct rte_tm_shaper_params *profile,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager shaper profile delete
+ *
+ * Delete an existing shaper profile. This operation fails when there is
+ * currently at least one user (i.e. shaper) of this shaper profile.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] shaper_profile_id
+ * Shaper profile ID. Needs to be the valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::shaper_n_max
+ */
+int
+rte_tm_shaper_profile_delete(uint8_t port_id,
+ uint32_t shaper_profile_id,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager shared shaper add or update
+ *
+ * When *shared_shaper_id* is not a valid shared shaper ID, a new shared shaper
+ * with this ID is created using the shaper profile identified by
+ * *shaper_profile_id*.
+ *
+ * When *shared_shaper_id* is a valid shared shaper ID, this shared shaper is
+ * no longer using the shaper profile previously assigned to it and is updated
+ * to use the shaper profile identified by *shaper_profile_id*.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] shared_shaper_id
+ * Shared shaper ID
+ * @param[in] shaper_profile_id
+ * Shaper profile ID. Needs to be the valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::shaper_shared_n_max
+ */
+int
+rte_tm_shared_shaper_add_update(uint8_t port_id,
+ uint32_t shared_shaper_id,
+ uint32_t shaper_profile_id,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager shared shaper delete
+ *
+ * Delete an existing shared shaper. This operation fails when there is
+ * currently at least one user (i.e. hierarchy node) of this shared shaper.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] shared_shaper_id
+ * Shared shaper ID. Needs to be the valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::shaper_shared_n_max
+ */
+int
+rte_tm_shared_shaper_delete(uint8_t port_id,
+ uint32_t shared_shaper_id,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node add
+ *
+ * Create new node and connect it as child of an existing node. The new node is
+ * further identified by *node_id*, which needs to be unused by any of the
+ * existing nodes. The parent node is identified by *parent_node_id*, which
+ * needs to be the valid ID of an existing non-leaf node. The parent node is
+ * going to use the provided SP *priority* and WFQ *weight* to schedule its new
+ * child node.
+ *
+ * This function has to be called for both leaf and non-leaf nodes. In the case
+ * of leaf nodes (i.e. *node_id* is within the range of 0 .. (N-1), with N as
+ * the number of configured TX queues of the current port), the leaf node is
+ * configured rather than created (as the set of leaf nodes is predefined) and
+ * it is also connected as child of an existing node.
+ *
+ * The first node that is added becomes the root node and all the nodes that
+ * are subsequently added have to be added as descendants of the root node. The
+ * parent of the root node has to be specified as RTE_TM_NODE_ID_NULL and there
+ * can only be one node with this parent ID (i.e. the root node). Further
+ * restrictions for root node: needs to be non-leaf, its private shaper profile
+ * needs to be valid and single rate, cannot use any shared shapers.
+ *
+ * When called before rte_tm_hierarchy_commit() invocation, this function is
+ * typically used to define the initial start-up hierarchy for the port.
+ * Provided that dynamic hierarchy updates are supported by the current port (as
+ * advertised in the port capability set), this function can be also called
+ * after the rte_tm_hierarchy_commit() invocation.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be unused by any of the existing nodes.
+ * @param[in] parent_node_id
+ * Parent node ID. Needs to be the valid.
+ * @param[in] priority
+ * Node priority. The highest node priority is zero. Used by the SP algorithm
+ * running on the parent of the current node for scheduling this child node.
+ * @param[in] weight
+ * Node weight. The node weight is relative to the weight sum of all siblings
+ * that have the same priority. The lowest weight is one. Used by the WFQ
+ * algorithm running on the parent of the current node for scheduling this
+ * child node.
+ * @param[in] level_id
+ * Level ID that should be met by this node. The hierarchy level of the
+ * current node is already fully specified through its parent node (i.e. the
+ * level of this node is equal to the level of its parent node plus one),
+ * therefore the reason for providing this parameter is to enable the
+ * application to perform step-by-step checking of the node level during
+ * successive invocations of this function. When not desired, this check can
+ * be disabled by assigning value RTE_TM_NODE_LEVEL_ID_ANY to this parameter.
+ * @param[in] params
+ * Node parameters. Needs to be pre-allocated and valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see rte_tm_hierarchy_commit()
+ * @see RTE_TM_UPDATE_NODE_ADD_DELETE
+ * @see RTE_TM_NODE_LEVEL_ID_ANY
+ * @see struct rte_tm_capabilities
+ */
+int
+rte_tm_node_add(uint8_t port_id,
+ uint32_t node_id,
+ uint32_t parent_node_id,
+ uint32_t priority,
+ uint32_t weight,
+ uint32_t level_id,
+ struct rte_tm_node_params *params,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node delete
+ *
+ * Delete an existing node. This operation fails when this node currently has
+ * at least one user (i.e. child node).
+ *
+ * When called before rte_tm_hierarchy_commit() invocation, this function is
+ * typically used to define the initial start-up hierarchy for the port.
+ * Provided that dynamic hierarchy updates are supported by the current port (as
+ * advertised in the port capability set), this function can be also called
+ * after the rte_tm_hierarchy_commit() invocation.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see RTE_TM_UPDATE_NODE_ADD_DELETE
+ */
+int
+rte_tm_node_delete(uint8_t port_id,
+ uint32_t node_id,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node suspend
+ *
+ * Suspend an existing node. While the node is in suspended state, no packet is
+ * scheduled from this node and its descendants. The node exits the suspended
+ * state through the node resume operation.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see rte_tm_node_resume()
+ * @see RTE_TM_UPDATE_NODE_SUSPEND_RESUME
+ */
+int
+rte_tm_node_suspend(uint8_t port_id,
+ uint32_t node_id,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node resume
+ *
+ * Resume an existing node that is currently in suspended state. The node
+ * entered the suspended state as result of a previous node suspend operation.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see rte_tm_node_suspend()
+ * @see RTE_TM_UPDATE_NODE_SUSPEND_RESUME
+ */
+int
+rte_tm_node_resume(uint8_t port_id,
+ uint32_t node_id,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager hierarchy commit
+ *
+ * This function is called during the port initialization phase (before the
+ * Ethernet port is started) to freeze the start-up hierarchy.
+ *
+ * This function typically performs the following steps:
+ * a) It validates the start-up hierarchy that was previously defined for the
+ * current port through successive rte_tm_node_add() invocations;
+ * b) Assuming successful validation, it performs all the necessary port
+ * specific configuration operations to install the specified hierarchy on
+ * the current port, with immediate effect once the port is started.
+ *
+ * This function fails when the currently configured hierarchy is not supported
+ * by the Ethernet port, in which case the user can abort or try out another
+ * hierarchy configuration (e.g. a hierarchy with less leaf nodes), which can be
+ * build from scratch (when *clear_on_fail* is enabled) or by modifying the
+ * existing hierarchy configuration (when *clear_on_fail* is disabled).
+ *
+ * Note that this function can still fail due to other causes (e.g. not enough
+ * memory available in the system, etc), even though the specified hierarchy is
+ * supported in principle by the current port.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] clear_on_fail
+ * On function call failure, hierarchy is cleared when this parameter is
+ * non-zero and preserved when this parameter is equal to zero.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see rte_tm_node_add()
+ * @see rte_tm_node_delete()
+ */
+int
+rte_tm_hierarchy_commit(uint8_t port_id,
+ int clear_on_fail,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node parent update
+ *
+ * Restriction for root node: its parent cannot be changed.
+ *
+ * This function can only be called after the rte_tm_hierarchy_commit()
+ * invocation. Its success depends on the port support for this operation, as
+ * advertised through the port capability set.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid.
+ * @param[in] parent_node_id
+ * Node ID for the new parent. Needs to be valid.
+ * @param[in] priority
+ * Node priority. The highest node priority is zero. Used by the SP algorithm
+ * running on the parent of the current node for scheduling this child node.
+ * @param[in] weight
+ * Node weight. The node weight is relative to the weight sum of all siblings
+ * that have the same priority. The lowest weight is zero. Used by the WFQ
+ * algorithm running on the parent of the current node for scheduling this
+ * child node.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see RTE_TM_UPDATE_NODE_PARENT_KEEP_LEVEL
+ * @see RTE_TM_UPDATE_NODE_PARENT_CHANGE_LEVEL
+ */
+int
+rte_tm_node_parent_update(uint8_t port_id,
+ uint32_t node_id,
+ uint32_t parent_node_id,
+ uint32_t priority,
+ uint32_t weight,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node private shaper update
+ *
+ * Restriction for the root node: its private shaper profile needs to be valid
+ * and single rate.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid.
+ * @param[in] shaper_profile_id
+ * Shaper profile ID for the private shaper of the current node. Needs to be
+ * either valid shaper profile ID or RTE_TM_SHAPER_PROFILE_ID_NONE, with
+ * the latter disabling the private shaper of the current node.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::shaper_private_n_max
+ */
+int
+rte_tm_node_shaper_update(uint8_t port_id,
+ uint32_t node_id,
+ uint32_t shaper_profile_id,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node shared shapers update
+ *
+ * Restriction for root node: cannot use any shared rate shapers.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid.
+ * @param[in] shared_shaper_id
+ * Shared shaper ID. Needs to be valid.
+ * @param[in] add
+ * Set to non-zero value to add this shared shaper to current node or to zero
+ * to delete this shared shaper from current node.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::shaper_shared_n_max
+ */
+int
+rte_tm_node_shared_shaper_update(uint8_t port_id,
+ uint32_t node_id,
+ uint32_t shared_shaper_id,
+ int add,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node enabled statistics counters update
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid.
+ * @param[in] stats_mask
+ * Mask of statistics counter types to be enabled for the current node. This
+ * needs to be a subset of the statistics counter types available for the
+ * current node. Any statistics counter type not included in this set is to
+ * be disabled for the current node.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see enum rte_tm_stats_type
+ * @see RTE_TM_UPDATE_NODE_STATS
+ */
+int
+rte_tm_node_stats_update(uint8_t port_id,
+ uint32_t node_id,
+ uint64_t stats_mask,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node WFQ weight mode update
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid leaf node ID.
+ * @param[in] wfq_weight_mode
+ * WFQ weight mode for each SP priority. When NULL, it indicates that WFQ is
+ * to be used for all priorities. When non-NULL, it points to a pre-allocated
+ * array of *n_sp_priorities* values, with non-zero value for byte-mode and
+ * zero for packet-mode.
+ * @param[in] n_sp_priorities
+ * Number of SP priorities.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see RTE_TM_UPDATE_NODE_WFQ_WEIGHT_MODE
+ * @see RTE_TM_UPDATE_NODE_N_SP_PRIORITIES
+ */
+int
+rte_tm_node_wfq_weight_mode_update(uint8_t port_id,
+ uint32_t node_id,
+ int *wfq_weight_mode,
+ uint32_t n_sp_priorities,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node congestion management mode update
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid leaf node ID.
+ * @param[in] cman
+ * Congestion management mode.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see RTE_TM_UPDATE_NODE_CMAN
+ */
+int
+rte_tm_node_cman_update(uint8_t port_id,
+ uint32_t node_id,
+ enum rte_tm_cman_mode cman,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node private WRED context update
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid leaf node ID.
+ * @param[in] wred_profile_id
+ * WRED profile ID for the private WRED context of the current node. Needs to
+ * be either valid WRED profile ID or RTE_TM_WRED_PROFILE_ID_NONE, with the
+ * latter disabling the private WRED context of the current node.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::cman_wred_context_private_n_max
+*/
+int
+rte_tm_node_wred_context_update(uint8_t port_id,
+ uint32_t node_id,
+ uint32_t wred_profile_id,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node shared WRED context update
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid leaf node ID.
+ * @param[in] shared_wred_context_id
+ * Shared WRED context ID. Needs to be valid.
+ * @param[in] add
+ * Set to non-zero value to add this shared WRED context to current node or
+ * to zero to delete this shared WRED context from current node.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::cman_wred_context_shared_n_max
+ */
+int
+rte_tm_node_shared_wred_context_update(uint8_t port_id,
+ uint32_t node_id,
+ uint32_t shared_wred_context_id,
+ int add,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager node statistics counters read
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] node_id
+ * Node ID. Needs to be valid.
+ * @param[out] stats
+ * When non-NULL, it contains the current value for the statistics counters
+ * enabled for the current node.
+ * @param[out] stats_mask
+ * When non-NULL, it contains the mask of statistics counter types that are
+ * currently enabled for this node, indicating which of the counters
+ * retrieved with the *stats* structure are valid.
+ * @param[in] clear
+ * When this parameter has a non-zero value, the statistics counters are
+ * cleared (i.e. set to zero) immediately after they have been read,
+ * otherwise the statistics counters are left untouched.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see enum rte_tm_stats_type
+ */
+int
+rte_tm_node_stats_read(uint8_t port_id,
+ uint32_t node_id,
+ struct rte_tm_node_stats *stats,
+ uint64_t *stats_mask,
+ int clear,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager packet marking - VLAN DEI (IEEE 802.1Q)
+ *
+ * IEEE 802.1p maps the traffic class to the VLAN Priority Code Point (PCP)
+ * field (3 bits), while IEEE 802.1q maps the drop priority to the VLAN Drop
+ * Eligible Indicator (DEI) field (1 bit), which was previously named Canonical
+ * Format Indicator (CFI).
+ *
+ * All VLAN frames of a given color get their DEI bit set if marking is enabled
+ * for this color; otherwise, their DEI bit is left as is (either set or not).
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] mark_green
+ * Set to non-zero value to enable marking of green packets and to zero to
+ * disable it.
+ * @param[in] mark_yellow
+ * Set to non-zero value to enable marking of yellow packets and to zero to
+ * disable it.
+ * @param[in] mark_red
+ * Set to non-zero value to enable marking of red packets and to zero to
+ * disable it.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::mark_vlan_dei_supported
+ */
+int
+rte_tm_mark_vlan_dei(uint8_t port_id,
+ int mark_green,
+ int mark_yellow,
+ int mark_red,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager packet marking - IPv4 / IPv6 ECN (IETF RFC 3168)
+ *
+ * IETF RFCs 2474 and 3168 reorganize the IPv4 Type of Service (TOS) field
+ * (8 bits) and the IPv6 Traffic Class (TC) field (8 bits) into Differentiated
+ * Services Codepoint (DSCP) field (6 bits) and Explicit Congestion
+ * Notification (ECN) field (2 bits). The DSCP field is typically used to
+ * encode the traffic class and/or drop priority (RFC 2597), while the ECN
+ * field is used by RFC 3168 to implement a congestion notification mechanism
+ * to be leveraged by transport layer protocols such as TCP and SCTP that have
+ * congestion control mechanisms.
+ *
+ * When congestion is experienced, as alternative to dropping the packet,
+ * routers can change the ECN field of input packets from 2'b01 or 2'b10
+ * (values indicating that source endpoint is ECN-capable) to 2'b11 (meaning
+ * that congestion is experienced). The destination endpoint can use the
+ * ECN-Echo (ECE) TCP flag to relay the congestion indication back to the
+ * source endpoint, which acknowledges it back to the destination endpoint with
+ * the Congestion Window Reduced (CWR) TCP flag.
+ *
+ * All IPv4/IPv6 packets of a given color with ECN set to 2’b01 or 2’b10
+ * carrying TCP or SCTP have their ECN set to 2’b11 if the marking feature is
+ * enabled for the current color, otherwise the ECN field is left as is.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] mark_green
+ * Set to non-zero value to enable marking of green packets and to zero to
+ * disable it.
+ * @param[in] mark_yellow
+ * Set to non-zero value to enable marking of yellow packets and to zero to
+ * disable it.
+ * @param[in] mark_red
+ * Set to non-zero value to enable marking of red packets and to zero to
+ * disable it.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::mark_ip_ecn_tcp_supported
+ * @see struct rte_tm_capabilities::mark_ip_ecn_sctp_supported
+ */
+int
+rte_tm_mark_ip_ecn(uint8_t port_id,
+ int mark_green,
+ int mark_yellow,
+ int mark_red,
+ struct rte_tm_error *error);
+
+/**
+ * Traffic manager packet marking - IPv4 / IPv6 DSCP (IETF RFC 2597)
+ *
+ * IETF RFC 2597 maps the traffic class and the drop priority to the IPv4/IPv6
+ * Differentiated Services Codepoint (DSCP) field (6 bits). Here are the DSCP
+ * values proposed by this RFC:
+ *
+ * <pre> Class 1 Class 2 Class 3 Class 4 </pre>
+ * <pre> +----------+----------+----------+----------+</pre>
+ * <pre>Low Drop Prec | 001010 | 010010 | 011010 | 100010 |</pre>
+ * <pre>Medium Drop Prec | 001100 | 010100 | 011100 | 100100 |</pre>
+ * <pre>High Drop Prec | 001110 | 010110 | 011110 | 100110 |</pre>
+ * <pre> +----------+----------+----------+----------+</pre>
+ *
+ * There are 4 traffic classes (classes 1 .. 4) encoded by DSCP bits 1 and 2,
+ * as well as 3 drop priorities (low/medium/high) encoded by DSCP bits 3 and 4.
+ *
+ * All IPv4/IPv6 packets have their color marked into DSCP bits 3 and 4 as
+ * follows: green mapped to Low Drop Precedence (2’b01), yellow to Medium
+ * (2’b10) and red to High (2’b11). Marking needs to be explicitly enabled
+ * for each color; when not enabled for a given color, the DSCP field of all
+ * packets with that color is left as is.
+ *
+ * @param[in] port_id
+ * The port identifier of the Ethernet device.
+ * @param[in] mark_green
+ * Set to non-zero value to enable marking of green packets and to zero to
+ * disable it.
+ * @param[in] mark_yellow
+ * Set to non-zero value to enable marking of yellow packets and to zero to
+ * disable it.
+ * @param[in] mark_red
+ * Set to non-zero value to enable marking of red packets and to zero to
+ * disable it.
+ * @param[out] error
+ * Error details. Filled in only on error, when not NULL.
+ * @return
+ * 0 on success, non-zero error code otherwise.
+ *
+ * @see struct rte_tm_capabilities::mark_ip_dscp_supported
+ */
+int
+rte_tm_mark_ip_dscp(uint8_t port_id,
+ int mark_green,
+ int mark_yellow,
+ int mark_red,
+ struct rte_tm_error *error);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __INCLUDE_RTE_TM_H__ */