diff options
Diffstat (limited to 'lib/librte_mbuf/rte_mbuf.h')
| -rw-r--r-- | lib/librte_mbuf/rte_mbuf.h | 141 |
1 files changed, 90 insertions, 51 deletions
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h index ce8a05dd..62740254 100644 --- a/lib/librte_mbuf/rte_mbuf.h +++ b/lib/librte_mbuf/rte_mbuf.h @@ -1,35 +1,6 @@ -/*- - * BSD LICENSE - * - * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. - * Copyright 2014 6WIND S.A. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2010-2014 Intel Corporation. + * Copyright 2014 6WIND S.A. */ #ifndef _RTE_MBUF_H_ @@ -61,7 +32,9 @@ */ #include <stdint.h> +#include <rte_compat.h> #include <rte_common.h> +#include <rte_config.h> #include <rte_mempool.h> #include <rte_memory.h> #include <rte_atomic.h> @@ -209,6 +182,13 @@ extern "C" { /* add new TX flags here */ /** + * UDP Fragmentation Offload flag. This flag is used for enabling UDP + * fragmentation in SW or in HW. When use UFO, mbuf->tso_segsz is used + * to store the MSS of UDP fragments. + */ +#define PKT_TX_UDP_SEG (1ULL << 42) + +/** * Request security offload processing on the TX packet. */ #define PKT_TX_SEC_OFFLOAD (1ULL << 43) @@ -236,7 +216,9 @@ extern "C" { /** * Second VLAN insertion (QinQ) flag. */ -#define PKT_TX_QINQ_PKT (1ULL << 49) /**< TX packet with double VLAN inserted. */ +#define PKT_TX_QINQ (1ULL << 49) /**< TX packet with double VLAN inserted. */ +/* this old name is deprecated */ +#define PKT_TX_QINQ_PKT PKT_TX_QINQ /** * TCP segmentation offload. To enable this offload feature for a @@ -297,7 +279,12 @@ extern "C" { */ #define PKT_TX_IPV6 (1ULL << 56) -#define PKT_TX_VLAN_PKT (1ULL << 57) /**< TX packet is a 802.1q VLAN packet. */ +/** + * TX packet is a 802.1q VLAN packet. + */ +#define PKT_TX_VLAN (1ULL << 57) +/* this old name is deprecated */ +#define PKT_TX_VLAN_PKT PKT_TX_VLAN /** * Offload the IP checksum of an external header in the hardware. The @@ -502,7 +489,7 @@ struct rte_mbuf { uint32_t pkt_len; /**< Total pkt len: sum of all segments. */ uint16_t data_len; /**< Amount of data in segment buffer. */ - /** VLAN TCI (CPU order), valid if PKT_RX_VLAN_STRIPPED is set. */ + /** VLAN TCI (CPU order), valid if PKT_RX_VLAN is set. */ uint16_t vlan_tci; union { @@ -528,7 +515,7 @@ struct rte_mbuf { uint32_t usr; /**< User defined tags. See rte_distributor_process() */ } hash; /**< hash information */ - /** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ_STRIPPED is set. */ + /** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ is set. */ uint16_t vlan_tci_outer; uint16_t buf_len; /**< Length of segment buffer. */ @@ -764,6 +751,13 @@ rte_mbuf_refcnt_set(struct rte_mbuf *m, uint16_t new_value) rte_atomic16_set(&m->refcnt_atomic, new_value); } +/* internal */ +static inline uint16_t +__rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value) +{ + return (uint16_t)(rte_atomic16_add_return(&m->refcnt_atomic, value)); +} + /** * Adds given value to an mbuf's refcnt and returns its new value. * @param m @@ -788,19 +782,26 @@ rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value) return 1 + value; } - return (uint16_t)(rte_atomic16_add_return(&m->refcnt_atomic, value)); + return __rte_mbuf_refcnt_update(m, value); } #else /* ! RTE_MBUF_REFCNT_ATOMIC */ +/* internal */ +static inline uint16_t +__rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value) +{ + m->refcnt = (uint16_t)(m->refcnt + value); + return m->refcnt; +} + /** * Adds given value to an mbuf's refcnt and returns its new value. */ static inline uint16_t rte_mbuf_refcnt_update(struct rte_mbuf *m, int16_t value) { - m->refcnt = (uint16_t)(m->refcnt + value); - return m->refcnt; + return __rte_mbuf_refcnt_update(m, value); } /** @@ -874,11 +875,9 @@ rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header); static inline struct rte_mbuf *rte_mbuf_raw_alloc(struct rte_mempool *mp) { struct rte_mbuf *m; - void *mb = NULL; - if (rte_mempool_get(mp, &mb) < 0) + if (rte_mempool_get(mp, (void **)&m) < 0) return NULL; - m = (struct rte_mbuf *)mb; MBUF_RAW_ALLOC_CHECK(m); return m; } @@ -1081,6 +1080,48 @@ rte_pktmbuf_pool_create(const char *name, unsigned n, int socket_id); /** + * Create a mbuf pool with a given mempool ops name + * + * This function creates and initializes a packet mbuf pool. It is + * a wrapper to rte_mempool functions. + * + * @param name + * The name of the mbuf pool. + * @param n + * The number of elements in the mbuf pool. The optimum size (in terms + * of memory usage) for a mempool is when n is a power of two minus one: + * n = (2^q - 1). + * @param cache_size + * Size of the per-core object cache. See rte_mempool_create() for + * details. + * @param priv_size + * Size of application private are between the rte_mbuf structure + * and the data buffer. This value must be aligned to RTE_MBUF_PRIV_ALIGN. + * @param data_room_size + * Size of data buffer in each mbuf, including RTE_PKTMBUF_HEADROOM. + * @param socket_id + * The socket identifier where the memory should be allocated. The + * value can be *SOCKET_ID_ANY* if there is no NUMA constraint for the + * reserved zone. + * @param ops_name + * The mempool ops name to be used for this mempool instead of + * default mempool. The value can be *NULL* to use default mempool. + * @return + * The pointer to the new allocated mempool, on success. NULL on error + * with rte_errno set appropriately. Possible rte_errno values include: + * - E_RTE_NO_CONFIG - function could not get pointer to rte_config structure + * - E_RTE_SECONDARY - function was called from a secondary process instance + * - EINVAL - cache size provided is too large, or priv_size is not aligned. + * - ENOSPC - the maximum number of memzones has already been allocated + * - EEXIST - a memzone with the same name already exists + * - ENOMEM - no appropriate memory area found in which to create memzone + */ +struct rte_mempool * __rte_experimental +rte_pktmbuf_pool_create_by_ops(const char *name, unsigned int n, + unsigned int cache_size, uint16_t priv_size, uint16_t data_room_size, + int socket_id, const char *ops_name); + +/** * Get the data room size of mbufs stored in a pktmbuf_pool * * The data room size is the amount of data that can be stored in a @@ -1364,8 +1405,7 @@ rte_pktmbuf_prefree_seg(struct rte_mbuf *m) return m; - } else if (rte_atomic16_add_return(&m->refcnt_atomic, -1) == 0) { - + } else if (__rte_mbuf_refcnt_update(m, -1) == 0) { if (RTE_MBUF_INDIRECT(m)) rte_pktmbuf_detach(m); @@ -1413,13 +1453,14 @@ rte_pktmbuf_free_seg(struct rte_mbuf *m) * segment is added back into its original mempool. * * @param m - * The packet mbuf to be freed. + * The packet mbuf to be freed. If NULL, the function does nothing. */ static inline void rte_pktmbuf_free(struct rte_mbuf *m) { struct rte_mbuf *m_next; - __rte_mbuf_sanity_check(m, 1); + if (m != NULL) + __rte_mbuf_sanity_check(m, 1); while (m != NULL) { m_next = m->next; @@ -1541,12 +1582,10 @@ static inline uint16_t rte_pktmbuf_tailroom(const struct rte_mbuf *m) */ static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m) { - struct rte_mbuf *m2 = (struct rte_mbuf *)m; - __rte_mbuf_sanity_check(m, 1); - while (m2->next != NULL) - m2 = m2->next; - return m2; + while (m->next != NULL) + m = m->next; + return m; } /** |