summaryrefslogtreecommitdiffstats
path: root/lib/librte_mbuf/rte_mbuf.h
diff options
context:
space:
mode:
Diffstat (limited to 'lib/librte_mbuf/rte_mbuf.h')
-rw-r--r--lib/librte_mbuf/rte_mbuf.h125
1 files changed, 93 insertions, 32 deletions
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index eaed7eee..6d91f7d3 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -89,12 +89,13 @@ extern "C" {
*/
/**
- * RX packet is a 802.1q VLAN packet. This flag was set by PMDs when
- * the packet is recognized as a VLAN, but the behavior between PMDs
- * was not the same. This flag is kept for some time to avoid breaking
- * applications and should be replaced by PKT_RX_VLAN_STRIPPED.
+ * The RX packet is a 802.1q VLAN packet, and the tci has been
+ * saved in in mbuf->vlan_tci.
+ * If the flag PKT_RX_VLAN_STRIPPED is also present, the VLAN
+ * header has been stripped from mbuf data, else it is still
+ * present.
*/
-#define PKT_RX_VLAN_PKT (1ULL << 0)
+#define PKT_RX_VLAN (1ULL << 0)
#define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */
#define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */
@@ -123,6 +124,7 @@ extern "C" {
* A vlan has been stripped by the hardware and its tci is saved in
* mbuf->vlan_tci. This can only happen if vlan stripping is enabled
* in the RX configuration of the PMD.
+ * When PKT_RX_VLAN_STRIPPED is set, PKT_RX_VLAN must also be set.
*/
#define PKT_RX_VLAN_STRIPPED (1ULL << 6)
@@ -165,19 +167,13 @@ extern "C" {
* The 2 vlans have been stripped by the hardware and their tci are
* saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer).
* This can only happen if vlan stripping is enabled in the RX
- * configuration of the PMD. If this flag is set, PKT_RX_VLAN_STRIPPED
- * must also be set.
+ * configuration of the PMD. If this flag is set,
+ * When PKT_RX_QINQ_STRIPPED is set, the flags (PKT_RX_VLAN |
+ * PKT_RX_VLAN_STRIPPED | PKT_RX_QINQ) must also be set.
*/
#define PKT_RX_QINQ_STRIPPED (1ULL << 15)
/**
- * Deprecated.
- * RX packet with double VLAN stripped.
- * This flag is replaced by PKT_RX_QINQ_STRIPPED.
- */
-#define PKT_RX_QINQ_PKT PKT_RX_QINQ_STRIPPED
-
-/**
* When packets are coalesced by a hardware or virtual driver, this flag
* can be set in the RX mbuf, meaning that the m->tso_segsz field is
* valid and is set to the segment size of original packets.
@@ -189,11 +185,35 @@ extern "C" {
*/
#define PKT_RX_TIMESTAMP (1ULL << 17)
+/**
+ * Indicate that security offload processing was applied on the RX packet.
+ */
+#define PKT_RX_SEC_OFFLOAD (1ULL << 18)
+
+/**
+ * Indicate that security offload processing failed on the RX packet.
+ */
+#define PKT_RX_SEC_OFFLOAD_FAILED (1ULL << 19)
+
+/**
+ * The RX packet is a double VLAN, and the outer tci has been
+ * saved in in mbuf->vlan_tci_outer.
+ * If the flag PKT_RX_QINQ_STRIPPED is also present, both VLANs
+ * headers have been stripped from mbuf data, else they are still
+ * present.
+ */
+#define PKT_RX_QINQ (1ULL << 20)
+
/* add new RX flags here */
/* add new TX flags here */
/**
+ * Request security offload processing on the TX packet.
+ */
+#define PKT_TX_SEC_OFFLOAD (1ULL << 43)
+
+/**
* Offload the MACsec. This flag must be set by the application to enable
* this offload feature for a packet to be transmitted.
*/
@@ -316,7 +336,8 @@ extern "C" {
PKT_TX_QINQ_PKT | \
PKT_TX_VLAN_PKT | \
PKT_TX_TUNNEL_MASK | \
- PKT_TX_MACSEC)
+ PKT_TX_MACSEC | \
+ PKT_TX_SEC_OFFLOAD)
#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */
@@ -411,7 +432,11 @@ struct rte_mbuf {
* same mbuf cacheline0 layout for 32-bit and 64-bit. This makes
* working on vector drivers easier.
*/
- phys_addr_t buf_physaddr __rte_aligned(sizeof(phys_addr_t));
+ RTE_STD_C11
+ union {
+ rte_iova_t buf_iova;
+ rte_iova_t buf_physaddr; /**< deprecated */
+ } __rte_aligned(sizeof(rte_iova_t));
/* next 8 bytes are initialised on RX descriptor rearm */
MARKER64 rearm_data;
@@ -456,8 +481,21 @@ struct rte_mbuf {
uint32_t l3_type:4; /**< (Outer) L3 type. */
uint32_t l4_type:4; /**< (Outer) L4 type. */
uint32_t tun_type:4; /**< Tunnel type. */
- uint32_t inner_l2_type:4; /**< Inner L2 type. */
- uint32_t inner_l3_type:4; /**< Inner L3 type. */
+ RTE_STD_C11
+ union {
+ uint8_t inner_esp_next_proto;
+ /**< ESP next protocol type, valid if
+ * RTE_PTYPE_TUNNEL_ESP tunnel type is set
+ * on both Tx and Rx.
+ */
+ __extension__
+ struct {
+ uint8_t inner_l2_type:4;
+ /**< Inner L2 type. */
+ uint8_t inner_l3_type:4;
+ /**< Inner L3 type. */
+ };
+ };
uint32_t inner_l4_type:4; /**< Inner L4 type. */
};
};
@@ -587,21 +625,28 @@ rte_mbuf_prefetch_part2(struct rte_mbuf *m)
static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp);
/**
- * Return the DMA address of the beginning of the mbuf data
+ * Return the IO address of the beginning of the mbuf data
*
* @param mb
* The pointer to the mbuf.
* @return
- * The physical address of the beginning of the mbuf data
+ * The IO address of the beginning of the mbuf data
*/
+static inline rte_iova_t
+rte_mbuf_data_iova(const struct rte_mbuf *mb)
+{
+ return mb->buf_iova + mb->data_off;
+}
+
+__rte_deprecated
static inline phys_addr_t
rte_mbuf_data_dma_addr(const struct rte_mbuf *mb)
{
- return mb->buf_physaddr + mb->data_off;
+ return rte_mbuf_data_iova(mb);
}
/**
- * Return the default DMA address of the beginning of the mbuf data
+ * Return the default IO address of the beginning of the mbuf data
*
* This function is used by drivers in their receive function, as it
* returns the location where data should be written by the NIC, taking
@@ -610,12 +655,19 @@ rte_mbuf_data_dma_addr(const struct rte_mbuf *mb)
* @param mb
* The pointer to the mbuf.
* @return
- * The physical address of the beginning of the mbuf data
+ * The IO address of the beginning of the mbuf data
*/
+static inline rte_iova_t
+rte_mbuf_data_iova_default(const struct rte_mbuf *mb)
+{
+ return mb->buf_iova + RTE_PKTMBUF_HEADROOM;
+}
+
+__rte_deprecated
static inline phys_addr_t
rte_mbuf_data_dma_addr_default(const struct rte_mbuf *mb)
{
- return mb->buf_physaddr + RTE_PKTMBUF_HEADROOM;
+ return rte_mbuf_data_iova_default(mb);
}
/**
@@ -806,7 +858,7 @@ rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header);
* For standard needs, prefer rte_pktmbuf_alloc().
*
* The caller can expect that the following fields of the mbuf structure
- * are initialized: buf_addr, buf_physaddr, buf_len, refcnt=1, nb_segs=1,
+ * are initialized: buf_addr, buf_iova, buf_len, refcnt=1, nb_segs=1,
* next=NULL, pool, priv_size. The other fields must be initialized
* by the caller.
*
@@ -1087,6 +1139,8 @@ static inline void rte_pktmbuf_reset_headroom(struct rte_mbuf *m)
* @param m
* The packet mbuf to be resetted.
*/
+#define MBUF_INVALID_PORT UINT16_MAX
+
static inline void rte_pktmbuf_reset(struct rte_mbuf *m)
{
m->next = NULL;
@@ -1095,7 +1149,7 @@ static inline void rte_pktmbuf_reset(struct rte_mbuf *m)
m->vlan_tci = 0;
m->vlan_tci_outer = 0;
m->nb_segs = 1;
- m->port = 0xff;
+ m->port = MBUF_INVALID_PORT;
m->ol_flags = 0;
m->packet_type = 0;
@@ -1214,7 +1268,7 @@ static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m)
rte_mbuf_refcnt_update(md, 1);
mi->priv_size = m->priv_size;
- mi->buf_physaddr = m->buf_physaddr;
+ mi->buf_iova = m->buf_iova;
mi->buf_addr = m->buf_addr;
mi->buf_len = m->buf_len;
@@ -1262,7 +1316,7 @@ static inline void rte_pktmbuf_detach(struct rte_mbuf *m)
m->priv_size = priv_size;
m->buf_addr = (char *)m + mbuf_size;
- m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
+ m->buf_iova = rte_mempool_virt2iova(m) + mbuf_size;
m->buf_len = (uint16_t)buf_len;
rte_pktmbuf_reset_headroom(m);
m->data_len = 0;
@@ -1524,7 +1578,7 @@ static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m)
#define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0)
/**
- * A macro that returns the physical address that points to an offset of the
+ * A macro that returns the IO address that points to an offset of the
* start of the data in the mbuf
*
* @param m
@@ -1532,17 +1586,24 @@ static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m)
* @param o
* The offset into the data to calculate address from.
*/
+#define rte_pktmbuf_iova_offset(m, o) \
+ (rte_iova_t)((m)->buf_iova + (m)->data_off + (o))
+
+/* deprecated */
#define rte_pktmbuf_mtophys_offset(m, o) \
- (phys_addr_t)((m)->buf_physaddr + (m)->data_off + (o))
+ rte_pktmbuf_iova_offset(m, o)
/**
- * A macro that returns the physical address that points to the start of the
+ * A macro that returns the IO address that points to the start of the
* data in the mbuf
*
* @param m
* The packet mbuf.
*/
-#define rte_pktmbuf_mtophys(m) rte_pktmbuf_mtophys_offset(m, 0)
+#define rte_pktmbuf_iova(m) rte_pktmbuf_iova_offset(m, 0)
+
+/* deprecated */
+#define rte_pktmbuf_mtophys(m) rte_pktmbuf_iova(m)
/**
* A macro that returns the length of the packet.