diff options
Diffstat (limited to 'lib/librte_mbuf/rte_mbuf.h')
| -rw-r--r-- | lib/librte_mbuf/rte_mbuf.h | 125 |
1 files changed, 93 insertions, 32 deletions
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h index eaed7eee..6d91f7d3 100644 --- a/lib/librte_mbuf/rte_mbuf.h +++ b/lib/librte_mbuf/rte_mbuf.h @@ -89,12 +89,13 @@ extern "C" { */ /** - * RX packet is a 802.1q VLAN packet. This flag was set by PMDs when - * the packet is recognized as a VLAN, but the behavior between PMDs - * was not the same. This flag is kept for some time to avoid breaking - * applications and should be replaced by PKT_RX_VLAN_STRIPPED. + * The RX packet is a 802.1q VLAN packet, and the tci has been + * saved in in mbuf->vlan_tci. + * If the flag PKT_RX_VLAN_STRIPPED is also present, the VLAN + * header has been stripped from mbuf data, else it is still + * present. */ -#define PKT_RX_VLAN_PKT (1ULL << 0) +#define PKT_RX_VLAN (1ULL << 0) #define PKT_RX_RSS_HASH (1ULL << 1) /**< RX packet with RSS hash result. */ #define PKT_RX_FDIR (1ULL << 2) /**< RX packet with FDIR match indicate. */ @@ -123,6 +124,7 @@ extern "C" { * A vlan has been stripped by the hardware and its tci is saved in * mbuf->vlan_tci. This can only happen if vlan stripping is enabled * in the RX configuration of the PMD. + * When PKT_RX_VLAN_STRIPPED is set, PKT_RX_VLAN must also be set. */ #define PKT_RX_VLAN_STRIPPED (1ULL << 6) @@ -165,19 +167,13 @@ extern "C" { * The 2 vlans have been stripped by the hardware and their tci are * saved in mbuf->vlan_tci (inner) and mbuf->vlan_tci_outer (outer). * This can only happen if vlan stripping is enabled in the RX - * configuration of the PMD. If this flag is set, PKT_RX_VLAN_STRIPPED - * must also be set. + * configuration of the PMD. If this flag is set, + * When PKT_RX_QINQ_STRIPPED is set, the flags (PKT_RX_VLAN | + * PKT_RX_VLAN_STRIPPED | PKT_RX_QINQ) must also be set. */ #define PKT_RX_QINQ_STRIPPED (1ULL << 15) /** - * Deprecated. - * RX packet with double VLAN stripped. - * This flag is replaced by PKT_RX_QINQ_STRIPPED. - */ -#define PKT_RX_QINQ_PKT PKT_RX_QINQ_STRIPPED - -/** * When packets are coalesced by a hardware or virtual driver, this flag * can be set in the RX mbuf, meaning that the m->tso_segsz field is * valid and is set to the segment size of original packets. @@ -189,11 +185,35 @@ extern "C" { */ #define PKT_RX_TIMESTAMP (1ULL << 17) +/** + * Indicate that security offload processing was applied on the RX packet. + */ +#define PKT_RX_SEC_OFFLOAD (1ULL << 18) + +/** + * Indicate that security offload processing failed on the RX packet. + */ +#define PKT_RX_SEC_OFFLOAD_FAILED (1ULL << 19) + +/** + * The RX packet is a double VLAN, and the outer tci has been + * saved in in mbuf->vlan_tci_outer. + * If the flag PKT_RX_QINQ_STRIPPED is also present, both VLANs + * headers have been stripped from mbuf data, else they are still + * present. + */ +#define PKT_RX_QINQ (1ULL << 20) + /* add new RX flags here */ /* add new TX flags here */ /** + * Request security offload processing on the TX packet. + */ +#define PKT_TX_SEC_OFFLOAD (1ULL << 43) + +/** * Offload the MACsec. This flag must be set by the application to enable * this offload feature for a packet to be transmitted. */ @@ -316,7 +336,8 @@ extern "C" { PKT_TX_QINQ_PKT | \ PKT_TX_VLAN_PKT | \ PKT_TX_TUNNEL_MASK | \ - PKT_TX_MACSEC) + PKT_TX_MACSEC | \ + PKT_TX_SEC_OFFLOAD) #define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */ @@ -411,7 +432,11 @@ struct rte_mbuf { * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes * working on vector drivers easier. */ - phys_addr_t buf_physaddr __rte_aligned(sizeof(phys_addr_t)); + RTE_STD_C11 + union { + rte_iova_t buf_iova; + rte_iova_t buf_physaddr; /**< deprecated */ + } __rte_aligned(sizeof(rte_iova_t)); /* next 8 bytes are initialised on RX descriptor rearm */ MARKER64 rearm_data; @@ -456,8 +481,21 @@ struct rte_mbuf { uint32_t l3_type:4; /**< (Outer) L3 type. */ uint32_t l4_type:4; /**< (Outer) L4 type. */ uint32_t tun_type:4; /**< Tunnel type. */ - uint32_t inner_l2_type:4; /**< Inner L2 type. */ - uint32_t inner_l3_type:4; /**< Inner L3 type. */ + RTE_STD_C11 + union { + uint8_t inner_esp_next_proto; + /**< ESP next protocol type, valid if + * RTE_PTYPE_TUNNEL_ESP tunnel type is set + * on both Tx and Rx. + */ + __extension__ + struct { + uint8_t inner_l2_type:4; + /**< Inner L2 type. */ + uint8_t inner_l3_type:4; + /**< Inner L3 type. */ + }; + }; uint32_t inner_l4_type:4; /**< Inner L4 type. */ }; }; @@ -587,21 +625,28 @@ rte_mbuf_prefetch_part2(struct rte_mbuf *m) static inline uint16_t rte_pktmbuf_priv_size(struct rte_mempool *mp); /** - * Return the DMA address of the beginning of the mbuf data + * Return the IO address of the beginning of the mbuf data * * @param mb * The pointer to the mbuf. * @return - * The physical address of the beginning of the mbuf data + * The IO address of the beginning of the mbuf data */ +static inline rte_iova_t +rte_mbuf_data_iova(const struct rte_mbuf *mb) +{ + return mb->buf_iova + mb->data_off; +} + +__rte_deprecated static inline phys_addr_t rte_mbuf_data_dma_addr(const struct rte_mbuf *mb) { - return mb->buf_physaddr + mb->data_off; + return rte_mbuf_data_iova(mb); } /** - * Return the default DMA address of the beginning of the mbuf data + * Return the default IO address of the beginning of the mbuf data * * This function is used by drivers in their receive function, as it * returns the location where data should be written by the NIC, taking @@ -610,12 +655,19 @@ rte_mbuf_data_dma_addr(const struct rte_mbuf *mb) * @param mb * The pointer to the mbuf. * @return - * The physical address of the beginning of the mbuf data + * The IO address of the beginning of the mbuf data */ +static inline rte_iova_t +rte_mbuf_data_iova_default(const struct rte_mbuf *mb) +{ + return mb->buf_iova + RTE_PKTMBUF_HEADROOM; +} + +__rte_deprecated static inline phys_addr_t rte_mbuf_data_dma_addr_default(const struct rte_mbuf *mb) { - return mb->buf_physaddr + RTE_PKTMBUF_HEADROOM; + return rte_mbuf_data_iova_default(mb); } /** @@ -806,7 +858,7 @@ rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header); * For standard needs, prefer rte_pktmbuf_alloc(). * * The caller can expect that the following fields of the mbuf structure - * are initialized: buf_addr, buf_physaddr, buf_len, refcnt=1, nb_segs=1, + * are initialized: buf_addr, buf_iova, buf_len, refcnt=1, nb_segs=1, * next=NULL, pool, priv_size. The other fields must be initialized * by the caller. * @@ -1087,6 +1139,8 @@ static inline void rte_pktmbuf_reset_headroom(struct rte_mbuf *m) * @param m * The packet mbuf to be resetted. */ +#define MBUF_INVALID_PORT UINT16_MAX + static inline void rte_pktmbuf_reset(struct rte_mbuf *m) { m->next = NULL; @@ -1095,7 +1149,7 @@ static inline void rte_pktmbuf_reset(struct rte_mbuf *m) m->vlan_tci = 0; m->vlan_tci_outer = 0; m->nb_segs = 1; - m->port = 0xff; + m->port = MBUF_INVALID_PORT; m->ol_flags = 0; m->packet_type = 0; @@ -1214,7 +1268,7 @@ static inline void rte_pktmbuf_attach(struct rte_mbuf *mi, struct rte_mbuf *m) rte_mbuf_refcnt_update(md, 1); mi->priv_size = m->priv_size; - mi->buf_physaddr = m->buf_physaddr; + mi->buf_iova = m->buf_iova; mi->buf_addr = m->buf_addr; mi->buf_len = m->buf_len; @@ -1262,7 +1316,7 @@ static inline void rte_pktmbuf_detach(struct rte_mbuf *m) m->priv_size = priv_size; m->buf_addr = (char *)m + mbuf_size; - m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size; + m->buf_iova = rte_mempool_virt2iova(m) + mbuf_size; m->buf_len = (uint16_t)buf_len; rte_pktmbuf_reset_headroom(m); m->data_len = 0; @@ -1524,7 +1578,7 @@ static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m) #define rte_pktmbuf_mtod(m, t) rte_pktmbuf_mtod_offset(m, t, 0) /** - * A macro that returns the physical address that points to an offset of the + * A macro that returns the IO address that points to an offset of the * start of the data in the mbuf * * @param m @@ -1532,17 +1586,24 @@ static inline struct rte_mbuf *rte_pktmbuf_lastseg(struct rte_mbuf *m) * @param o * The offset into the data to calculate address from. */ +#define rte_pktmbuf_iova_offset(m, o) \ + (rte_iova_t)((m)->buf_iova + (m)->data_off + (o)) + +/* deprecated */ #define rte_pktmbuf_mtophys_offset(m, o) \ - (phys_addr_t)((m)->buf_physaddr + (m)->data_off + (o)) + rte_pktmbuf_iova_offset(m, o) /** - * A macro that returns the physical address that points to the start of the + * A macro that returns the IO address that points to the start of the * data in the mbuf * * @param m * The packet mbuf. */ -#define rte_pktmbuf_mtophys(m) rte_pktmbuf_mtophys_offset(m, 0) +#define rte_pktmbuf_iova(m) rte_pktmbuf_iova_offset(m, 0) + +/* deprecated */ +#define rte_pktmbuf_mtophys(m) rte_pktmbuf_iova(m) /** * A macro that returns the length of the packet. |