diff options
Diffstat (limited to 'test/test/test_acl.c')
| -rw-r--r-- | test/test/test_acl.c | 1652 |
1 files changed, 1652 insertions, 0 deletions
diff --git a/test/test/test_acl.c b/test/test/test_acl.c new file mode 100644 index 00000000..c6b511fb --- /dev/null +++ b/test/test/test_acl.c @@ -0,0 +1,1652 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <string.h> +#include <errno.h> + +#include "test.h" + +#include <rte_string_fns.h> +#include <rte_mbuf.h> +#include <rte_byteorder.h> +#include <rte_ip.h> +#include <rte_acl.h> +#include <rte_common.h> + +#include "test_acl.h" + +#define BIT_SIZEOF(x) (sizeof(x) * CHAR_BIT) + +#define LEN RTE_ACL_MAX_CATEGORIES + +RTE_ACL_RULE_DEF(acl_ipv4vlan_rule, RTE_ACL_IPV4VLAN_NUM_FIELDS); + +struct rte_acl_param acl_param = { + .name = "acl_ctx", + .socket_id = SOCKET_ID_ANY, + .rule_size = RTE_ACL_IPV4VLAN_RULE_SZ, + .max_rule_num = 0x30000, +}; + +struct rte_acl_ipv4vlan_rule acl_rule = { + .data = { .priority = 1, .category_mask = 0xff }, + .src_port_low = 0, + .src_port_high = UINT16_MAX, + .dst_port_low = 0, + .dst_port_high = UINT16_MAX, +}; + +const uint32_t ipv4_7tuple_layout[RTE_ACL_IPV4VLAN_NUM] = { + offsetof(struct ipv4_7tuple, proto), + offsetof(struct ipv4_7tuple, vlan), + offsetof(struct ipv4_7tuple, ip_src), + offsetof(struct ipv4_7tuple, ip_dst), + offsetof(struct ipv4_7tuple, port_src), +}; + + +/* byteswap to cpu or network order */ +static void +bswap_test_data(struct ipv4_7tuple *data, int len, int to_be) +{ + int i; + + for (i = 0; i < len; i++) { + + if (to_be) { + /* swap all bytes so that they are in network order */ + data[i].ip_dst = rte_cpu_to_be_32(data[i].ip_dst); + data[i].ip_src = rte_cpu_to_be_32(data[i].ip_src); + data[i].port_dst = rte_cpu_to_be_16(data[i].port_dst); + data[i].port_src = rte_cpu_to_be_16(data[i].port_src); + data[i].vlan = rte_cpu_to_be_16(data[i].vlan); + data[i].domain = rte_cpu_to_be_16(data[i].domain); + } else { + data[i].ip_dst = rte_be_to_cpu_32(data[i].ip_dst); + data[i].ip_src = rte_be_to_cpu_32(data[i].ip_src); + data[i].port_dst = rte_be_to_cpu_16(data[i].port_dst); + data[i].port_src = rte_be_to_cpu_16(data[i].port_src); + data[i].vlan = rte_be_to_cpu_16(data[i].vlan); + data[i].domain = rte_be_to_cpu_16(data[i].domain); + } + } +} + +static int +acl_ipv4vlan_check_rule(const struct rte_acl_ipv4vlan_rule *rule) +{ + if (rule->src_port_low > rule->src_port_high || + rule->dst_port_low > rule->dst_port_high || + rule->src_mask_len > BIT_SIZEOF(rule->src_addr) || + rule->dst_mask_len > BIT_SIZEOF(rule->dst_addr)) + return -EINVAL; + return 0; +} + +static void +acl_ipv4vlan_convert_rule(const struct rte_acl_ipv4vlan_rule *ri, + struct acl_ipv4vlan_rule *ro) +{ + ro->data = ri->data; + + ro->field[RTE_ACL_IPV4VLAN_PROTO_FIELD].value.u8 = ri->proto; + ro->field[RTE_ACL_IPV4VLAN_VLAN1_FIELD].value.u16 = ri->vlan; + ro->field[RTE_ACL_IPV4VLAN_VLAN2_FIELD].value.u16 = ri->domain; + ro->field[RTE_ACL_IPV4VLAN_SRC_FIELD].value.u32 = ri->src_addr; + ro->field[RTE_ACL_IPV4VLAN_DST_FIELD].value.u32 = ri->dst_addr; + ro->field[RTE_ACL_IPV4VLAN_SRCP_FIELD].value.u16 = ri->src_port_low; + ro->field[RTE_ACL_IPV4VLAN_DSTP_FIELD].value.u16 = ri->dst_port_low; + + ro->field[RTE_ACL_IPV4VLAN_PROTO_FIELD].mask_range.u8 = ri->proto_mask; + ro->field[RTE_ACL_IPV4VLAN_VLAN1_FIELD].mask_range.u16 = ri->vlan_mask; + ro->field[RTE_ACL_IPV4VLAN_VLAN2_FIELD].mask_range.u16 = + ri->domain_mask; + ro->field[RTE_ACL_IPV4VLAN_SRC_FIELD].mask_range.u32 = + ri->src_mask_len; + ro->field[RTE_ACL_IPV4VLAN_DST_FIELD].mask_range.u32 = ri->dst_mask_len; + ro->field[RTE_ACL_IPV4VLAN_SRCP_FIELD].mask_range.u16 = + ri->src_port_high; + ro->field[RTE_ACL_IPV4VLAN_DSTP_FIELD].mask_range.u16 = + ri->dst_port_high; +} + +/* + * Add ipv4vlan rules to an existing ACL context. + * This function is not multi-thread safe. + * + * @param ctx + * ACL context to add patterns to. + * @param rules + * Array of rules to add to the ACL context. + * Note that all fields in rte_acl_ipv4vlan_rule structures are expected + * to be in host byte order. + * @param num + * Number of elements in the input array of rules. + * @return + * - -ENOMEM if there is no space in the ACL context for these rules. + * - -EINVAL if the parameters are invalid. + * - Zero if operation completed successfully. + */ +static int +rte_acl_ipv4vlan_add_rules(struct rte_acl_ctx *ctx, + const struct rte_acl_ipv4vlan_rule *rules, + uint32_t num) +{ + int32_t rc; + uint32_t i; + struct acl_ipv4vlan_rule rv; + + if (ctx == NULL || rules == NULL) + return -EINVAL; + + /* check input rules. */ + for (i = 0; i != num; i++) { + rc = acl_ipv4vlan_check_rule(rules + i); + if (rc != 0) { + RTE_LOG(ERR, ACL, "%s: rule #%u is invalid\n", + __func__, i + 1); + return rc; + } + } + + /* perform conversion to the internal format and add to the context. */ + for (i = 0, rc = 0; i != num && rc == 0; i++) { + acl_ipv4vlan_convert_rule(rules + i, &rv); + rc = rte_acl_add_rules(ctx, (struct rte_acl_rule *)&rv, 1); + } + + return rc; +} + +static void +acl_ipv4vlan_config(struct rte_acl_config *cfg, + const uint32_t layout[RTE_ACL_IPV4VLAN_NUM], + uint32_t num_categories) +{ + static const struct rte_acl_field_def + ipv4_defs[RTE_ACL_IPV4VLAN_NUM_FIELDS] = { + { + .type = RTE_ACL_FIELD_TYPE_BITMASK, + .size = sizeof(uint8_t), + .field_index = RTE_ACL_IPV4VLAN_PROTO_FIELD, + .input_index = RTE_ACL_IPV4VLAN_PROTO, + }, + { + .type = RTE_ACL_FIELD_TYPE_BITMASK, + .size = sizeof(uint16_t), + .field_index = RTE_ACL_IPV4VLAN_VLAN1_FIELD, + .input_index = RTE_ACL_IPV4VLAN_VLAN, + }, + { + .type = RTE_ACL_FIELD_TYPE_BITMASK, + .size = sizeof(uint16_t), + .field_index = RTE_ACL_IPV4VLAN_VLAN2_FIELD, + .input_index = RTE_ACL_IPV4VLAN_VLAN, + }, + { + .type = RTE_ACL_FIELD_TYPE_MASK, + .size = sizeof(uint32_t), + .field_index = RTE_ACL_IPV4VLAN_SRC_FIELD, + .input_index = RTE_ACL_IPV4VLAN_SRC, + }, + { + .type = RTE_ACL_FIELD_TYPE_MASK, + .size = sizeof(uint32_t), + .field_index = RTE_ACL_IPV4VLAN_DST_FIELD, + .input_index = RTE_ACL_IPV4VLAN_DST, + }, + { + .type = RTE_ACL_FIELD_TYPE_RANGE, + .size = sizeof(uint16_t), + .field_index = RTE_ACL_IPV4VLAN_SRCP_FIELD, + .input_index = RTE_ACL_IPV4VLAN_PORTS, + }, + { + .type = RTE_ACL_FIELD_TYPE_RANGE, + .size = sizeof(uint16_t), + .field_index = RTE_ACL_IPV4VLAN_DSTP_FIELD, + .input_index = RTE_ACL_IPV4VLAN_PORTS, + }, + }; + + memcpy(&cfg->defs, ipv4_defs, sizeof(ipv4_defs)); + cfg->num_fields = RTE_DIM(ipv4_defs); + + cfg->defs[RTE_ACL_IPV4VLAN_PROTO_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_PROTO]; + cfg->defs[RTE_ACL_IPV4VLAN_VLAN1_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_VLAN]; + cfg->defs[RTE_ACL_IPV4VLAN_VLAN2_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_VLAN] + + cfg->defs[RTE_ACL_IPV4VLAN_VLAN1_FIELD].size; + cfg->defs[RTE_ACL_IPV4VLAN_SRC_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_SRC]; + cfg->defs[RTE_ACL_IPV4VLAN_DST_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_DST]; + cfg->defs[RTE_ACL_IPV4VLAN_SRCP_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_PORTS]; + cfg->defs[RTE_ACL_IPV4VLAN_DSTP_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_PORTS] + + cfg->defs[RTE_ACL_IPV4VLAN_SRCP_FIELD].size; + + cfg->num_categories = num_categories; +} + +/* + * Analyze set of ipv4vlan rules and build required internal + * run-time structures. + * This function is not multi-thread safe. + * + * @param ctx + * ACL context to build. + * @param layout + * Layout of input data to search through. + * @param num_categories + * Maximum number of categories to use in that build. + * @return + * - -ENOMEM if couldn't allocate enough memory. + * - -EINVAL if the parameters are invalid. + * - Negative error code if operation failed. + * - Zero if operation completed successfully. + */ +static int +rte_acl_ipv4vlan_build(struct rte_acl_ctx *ctx, + const uint32_t layout[RTE_ACL_IPV4VLAN_NUM], + uint32_t num_categories) +{ + struct rte_acl_config cfg; + + if (ctx == NULL || layout == NULL) + return -EINVAL; + + memset(&cfg, 0, sizeof(cfg)); + acl_ipv4vlan_config(&cfg, layout, num_categories); + return rte_acl_build(ctx, &cfg); +} + +/* + * Test scalar and SSE ACL lookup. + */ +static int +test_classify_run(struct rte_acl_ctx *acx) +{ + int ret, i; + uint32_t result, count; + uint32_t results[RTE_DIM(acl_test_data) * RTE_ACL_MAX_CATEGORIES]; + const uint8_t *data[RTE_DIM(acl_test_data)]; + + /* swap all bytes in the data to network order */ + bswap_test_data(acl_test_data, RTE_DIM(acl_test_data), 1); + + /* store pointers to test data */ + for (i = 0; i < (int) RTE_DIM(acl_test_data); i++) + data[i] = (uint8_t *)&acl_test_data[i]; + + /** + * these will run quite a few times, it's necessary to test code paths + * from num=0 to num>8 + */ + for (count = 0; count <= RTE_DIM(acl_test_data); count++) { + ret = rte_acl_classify(acx, data, results, + count, RTE_ACL_MAX_CATEGORIES); + if (ret != 0) { + printf("Line %i: SSE classify failed!\n", __LINE__); + goto err; + } + + /* check if we allow everything we should allow */ + for (i = 0; i < (int) count; i++) { + result = + results[i * RTE_ACL_MAX_CATEGORIES + ACL_ALLOW]; + if (result != acl_test_data[i].allow) { + printf("Line %i: Error in allow results at %i " + "(expected %"PRIu32" got %"PRIu32")!\n", + __LINE__, i, acl_test_data[i].allow, + result); + ret = -EINVAL; + goto err; + } + } + + /* check if we deny everything we should deny */ + for (i = 0; i < (int) count; i++) { + result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_DENY]; + if (result != acl_test_data[i].deny) { + printf("Line %i: Error in deny results at %i " + "(expected %"PRIu32" got %"PRIu32")!\n", + __LINE__, i, acl_test_data[i].deny, + result); + ret = -EINVAL; + goto err; + } + } + } + + /* make a quick check for scalar */ + ret = rte_acl_classify_alg(acx, data, results, + RTE_DIM(acl_test_data), RTE_ACL_MAX_CATEGORIES, + RTE_ACL_CLASSIFY_SCALAR); + if (ret != 0) { + printf("Line %i: scalar classify failed!\n", __LINE__); + goto err; + } + + /* check if we allow everything we should allow */ + for (i = 0; i < (int) RTE_DIM(acl_test_data); i++) { + result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_ALLOW]; + if (result != acl_test_data[i].allow) { + printf("Line %i: Error in allow results at %i " + "(expected %"PRIu32" got %"PRIu32")!\n", + __LINE__, i, acl_test_data[i].allow, + result); + ret = -EINVAL; + goto err; + } + } + + /* check if we deny everything we should deny */ + for (i = 0; i < (int) RTE_DIM(acl_test_data); i++) { + result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_DENY]; + if (result != acl_test_data[i].deny) { + printf("Line %i: Error in deny results at %i " + "(expected %"PRIu32" got %"PRIu32")!\n", + __LINE__, i, acl_test_data[i].deny, + result); + ret = -EINVAL; + goto err; + } + } + + ret = 0; + +err: + /* swap data back to cpu order so that next time tests don't fail */ + bswap_test_data(acl_test_data, RTE_DIM(acl_test_data), 0); + return ret; +} + +static int +test_classify_buid(struct rte_acl_ctx *acx, + const struct rte_acl_ipv4vlan_rule *rules, uint32_t num) +{ + int ret; + + /* add rules to the context */ + ret = rte_acl_ipv4vlan_add_rules(acx, rules, num); + if (ret != 0) { + printf("Line %i: Adding rules to ACL context failed!\n", + __LINE__); + return ret; + } + + /* try building the context */ + ret = rte_acl_ipv4vlan_build(acx, ipv4_7tuple_layout, + RTE_ACL_MAX_CATEGORIES); + if (ret != 0) { + printf("Line %i: Building ACL context failed!\n", __LINE__); + return ret; + } + + return 0; +} + +#define TEST_CLASSIFY_ITER 4 + +/* + * Test scalar and SSE ACL lookup. + */ +static int +test_classify(void) +{ + struct rte_acl_ctx *acx; + int i, ret; + + acx = rte_acl_create(&acl_param); + if (acx == NULL) { + printf("Line %i: Error creating ACL context!\n", __LINE__); + return -1; + } + + ret = 0; + for (i = 0; i != TEST_CLASSIFY_ITER; i++) { + + if ((i & 1) == 0) + rte_acl_reset(acx); + else + rte_acl_reset_rules(acx); + + ret = test_classify_buid(acx, acl_test_rules, + RTE_DIM(acl_test_rules)); + if (ret != 0) { + printf("Line %i, iter: %d: " + "Adding rules to ACL context failed!\n", + __LINE__, i); + break; + } + + ret = test_classify_run(acx); + if (ret != 0) { + printf("Line %i, iter: %d: %s failed!\n", + __LINE__, i, __func__); + break; + } + + /* reset rules and make sure that classify still works ok. */ + rte_acl_reset_rules(acx); + ret = test_classify_run(acx); + if (ret != 0) { + printf("Line %i, iter: %d: %s failed!\n", + __LINE__, i, __func__); + break; + } + } + + rte_acl_free(acx); + return ret; +} + +static int +test_build_ports_range(void) +{ + static const struct rte_acl_ipv4vlan_rule test_rules[] = { + { + /* match all packets. */ + .data = { + .userdata = 1, + .category_mask = ACL_ALLOW_MASK, + .priority = 101, + }, + .src_port_low = 0, + .src_port_high = UINT16_MAX, + .dst_port_low = 0, + .dst_port_high = UINT16_MAX, + }, + { + /* match all packets with dst ports [54-65280]. */ + .data = { + .userdata = 2, + .category_mask = ACL_ALLOW_MASK, + .priority = 102, + }, + .src_port_low = 0, + .src_port_high = UINT16_MAX, + .dst_port_low = 54, + .dst_port_high = 65280, + }, + { + /* match all packets with dst ports [0-52]. */ + .data = { + .userdata = 3, + .category_mask = ACL_ALLOW_MASK, + .priority = 103, + }, + .src_port_low = 0, + .src_port_high = UINT16_MAX, + .dst_port_low = 0, + .dst_port_high = 52, + }, + { + /* match all packets with dst ports [53]. */ + .data = { + .userdata = 4, + .category_mask = ACL_ALLOW_MASK, + .priority = 99, + }, + .src_port_low = 0, + .src_port_high = UINT16_MAX, + .dst_port_low = 53, + .dst_port_high = 53, + }, + { + /* match all packets with dst ports [65279-65535]. */ + .data = { + .userdata = 5, + .category_mask = ACL_ALLOW_MASK, + .priority = 98, + }, + .src_port_low = 0, + .src_port_high = UINT16_MAX, + .dst_port_low = 65279, + .dst_port_high = UINT16_MAX, + }, + }; + + static struct ipv4_7tuple test_data[] = { + { + .proto = 6, + .ip_src = IPv4(10, 1, 1, 1), + .ip_dst = IPv4(192, 168, 0, 33), + .port_dst = 53, + .allow = 1, + }, + { + .proto = 6, + .ip_src = IPv4(127, 84, 33, 1), + .ip_dst = IPv4(1, 2, 3, 4), + .port_dst = 65281, + .allow = 1, + }, + }; + + struct rte_acl_ctx *acx; + int32_t ret, i, j; + uint32_t results[RTE_DIM(test_data)]; + const uint8_t *data[RTE_DIM(test_data)]; + + acx = rte_acl_create(&acl_param); + if (acx == NULL) { + printf("Line %i: Error creating ACL context!\n", __LINE__); + return -1; + } + + /* swap all bytes in the data to network order */ + bswap_test_data(test_data, RTE_DIM(test_data), 1); + + /* store pointers to test data */ + for (i = 0; i != RTE_DIM(test_data); i++) + data[i] = (uint8_t *)&test_data[i]; + + for (i = 0; i != RTE_DIM(test_rules); i++) { + rte_acl_reset(acx); + ret = test_classify_buid(acx, test_rules, i + 1); + if (ret != 0) { + printf("Line %i, iter: %d: " + "Adding rules to ACL context failed!\n", + __LINE__, i); + break; + } + ret = rte_acl_classify(acx, data, results, + RTE_DIM(data), 1); + if (ret != 0) { + printf("Line %i, iter: %d: classify failed!\n", + __LINE__, i); + break; + } + + /* check results */ + for (j = 0; j != RTE_DIM(results); j++) { + if (results[j] != test_data[j].allow) { + printf("Line %i: Error in allow results at %i " + "(expected %"PRIu32" got %"PRIu32")!\n", + __LINE__, j, test_data[j].allow, + results[j]); + ret = -EINVAL; + } + } + } + + bswap_test_data(test_data, RTE_DIM(test_data), 0); + + rte_acl_free(acx); + return ret; +} + +static void +convert_rule(const struct rte_acl_ipv4vlan_rule *ri, + struct acl_ipv4vlan_rule *ro) +{ + ro->data = ri->data; + + ro->field[RTE_ACL_IPV4VLAN_PROTO_FIELD].value.u8 = ri->proto; + ro->field[RTE_ACL_IPV4VLAN_VLAN1_FIELD].value.u16 = ri->vlan; + ro->field[RTE_ACL_IPV4VLAN_VLAN2_FIELD].value.u16 = ri->domain; + ro->field[RTE_ACL_IPV4VLAN_SRC_FIELD].value.u32 = ri->src_addr; + ro->field[RTE_ACL_IPV4VLAN_DST_FIELD].value.u32 = ri->dst_addr; + ro->field[RTE_ACL_IPV4VLAN_SRCP_FIELD].value.u16 = ri->src_port_low; + ro->field[RTE_ACL_IPV4VLAN_DSTP_FIELD].value.u16 = ri->dst_port_low; + + ro->field[RTE_ACL_IPV4VLAN_PROTO_FIELD].mask_range.u8 = ri->proto_mask; + ro->field[RTE_ACL_IPV4VLAN_VLAN1_FIELD].mask_range.u16 = ri->vlan_mask; + ro->field[RTE_ACL_IPV4VLAN_VLAN2_FIELD].mask_range.u16 = + ri->domain_mask; + ro->field[RTE_ACL_IPV4VLAN_SRC_FIELD].mask_range.u32 = + ri->src_mask_len; + ro->field[RTE_ACL_IPV4VLAN_DST_FIELD].mask_range.u32 = ri->dst_mask_len; + ro->field[RTE_ACL_IPV4VLAN_SRCP_FIELD].mask_range.u16 = + ri->src_port_high; + ro->field[RTE_ACL_IPV4VLAN_DSTP_FIELD].mask_range.u16 = + ri->dst_port_high; +} + +/* + * Convert IPV4 source and destination from RTE_ACL_FIELD_TYPE_MASK to + * RTE_ACL_FIELD_TYPE_BITMASK. + */ +static void +convert_rule_1(const struct rte_acl_ipv4vlan_rule *ri, + struct acl_ipv4vlan_rule *ro) +{ + uint32_t v; + + convert_rule(ri, ro); + v = ro->field[RTE_ACL_IPV4VLAN_SRC_FIELD].mask_range.u32; + ro->field[RTE_ACL_IPV4VLAN_SRC_FIELD].mask_range.u32 = + RTE_ACL_MASKLEN_TO_BITMASK(v, sizeof(v)); + v = ro->field[RTE_ACL_IPV4VLAN_DST_FIELD].mask_range.u32; + ro->field[RTE_ACL_IPV4VLAN_DST_FIELD].mask_range.u32 = + RTE_ACL_MASKLEN_TO_BITMASK(v, sizeof(v)); +} + +/* + * Convert IPV4 source and destination from RTE_ACL_FIELD_TYPE_MASK to + * RTE_ACL_FIELD_TYPE_RANGE. + */ +static void +convert_rule_2(const struct rte_acl_ipv4vlan_rule *ri, + struct acl_ipv4vlan_rule *ro) +{ + uint32_t hi, lo, mask; + + convert_rule(ri, ro); + + mask = ro->field[RTE_ACL_IPV4VLAN_SRC_FIELD].mask_range.u32; + mask = RTE_ACL_MASKLEN_TO_BITMASK(mask, sizeof(mask)); + lo = ro->field[RTE_ACL_IPV4VLAN_SRC_FIELD].value.u32 & mask; + hi = lo + ~mask; + ro->field[RTE_ACL_IPV4VLAN_SRC_FIELD].value.u32 = lo; + ro->field[RTE_ACL_IPV4VLAN_SRC_FIELD].mask_range.u32 = hi; + + mask = ro->field[RTE_ACL_IPV4VLAN_DST_FIELD].mask_range.u32; + mask = RTE_ACL_MASKLEN_TO_BITMASK(mask, sizeof(mask)); + lo = ro->field[RTE_ACL_IPV4VLAN_DST_FIELD].value.u32 & mask; + hi = lo + ~mask; + ro->field[RTE_ACL_IPV4VLAN_DST_FIELD].value.u32 = lo; + ro->field[RTE_ACL_IPV4VLAN_DST_FIELD].mask_range.u32 = hi; +} + +/* + * Convert rte_acl_ipv4vlan_rule: swap VLAN and PORTS rule fields. + */ +static void +convert_rule_3(const struct rte_acl_ipv4vlan_rule *ri, + struct acl_ipv4vlan_rule *ro) +{ + struct rte_acl_field t1, t2; + + convert_rule(ri, ro); + + t1 = ro->field[RTE_ACL_IPV4VLAN_VLAN1_FIELD]; + t2 = ro->field[RTE_ACL_IPV4VLAN_VLAN2_FIELD]; + + ro->field[RTE_ACL_IPV4VLAN_VLAN1_FIELD] = + ro->field[RTE_ACL_IPV4VLAN_SRCP_FIELD]; + ro->field[RTE_ACL_IPV4VLAN_VLAN2_FIELD] = + ro->field[RTE_ACL_IPV4VLAN_DSTP_FIELD]; + + ro->field[RTE_ACL_IPV4VLAN_SRCP_FIELD] = t1; + ro->field[RTE_ACL_IPV4VLAN_DSTP_FIELD] = t2; +} + +/* + * Convert rte_acl_ipv4vlan_rule: swap SRC and DST IPv4 address rules. + */ +static void +convert_rule_4(const struct rte_acl_ipv4vlan_rule *ri, + struct acl_ipv4vlan_rule *ro) +{ + struct rte_acl_field t; + + convert_rule(ri, ro); + + t = ro->field[RTE_ACL_IPV4VLAN_SRC_FIELD]; + ro->field[RTE_ACL_IPV4VLAN_SRC_FIELD] = + ro->field[RTE_ACL_IPV4VLAN_DST_FIELD]; + + ro->field[RTE_ACL_IPV4VLAN_DST_FIELD] = t; +} + +static void +ipv4vlan_config(struct rte_acl_config *cfg, + const uint32_t layout[RTE_ACL_IPV4VLAN_NUM], + uint32_t num_categories) +{ + static const struct rte_acl_field_def + ipv4_defs[RTE_ACL_IPV4VLAN_NUM_FIELDS] = { + { + .type = RTE_ACL_FIELD_TYPE_BITMASK, + .size = sizeof(uint8_t), + .field_index = RTE_ACL_IPV4VLAN_PROTO_FIELD, + .input_index = RTE_ACL_IPV4VLAN_PROTO, + }, + { + .type = RTE_ACL_FIELD_TYPE_BITMASK, + .size = sizeof(uint16_t), + .field_index = RTE_ACL_IPV4VLAN_VLAN1_FIELD, + .input_index = RTE_ACL_IPV4VLAN_VLAN, + }, + { + .type = RTE_ACL_FIELD_TYPE_BITMASK, + .size = sizeof(uint16_t), + .field_index = RTE_ACL_IPV4VLAN_VLAN2_FIELD, + .input_index = RTE_ACL_IPV4VLAN_VLAN, + }, + { + .type = RTE_ACL_FIELD_TYPE_MASK, + .size = sizeof(uint32_t), + .field_index = RTE_ACL_IPV4VLAN_SRC_FIELD, + .input_index = RTE_ACL_IPV4VLAN_SRC, + }, + { + .type = RTE_ACL_FIELD_TYPE_MASK, + .size = sizeof(uint32_t), + .field_index = RTE_ACL_IPV4VLAN_DST_FIELD, + .input_index = RTE_ACL_IPV4VLAN_DST, + }, + { + .type = RTE_ACL_FIELD_TYPE_RANGE, + .size = sizeof(uint16_t), + .field_index = RTE_ACL_IPV4VLAN_SRCP_FIELD, + .input_index = RTE_ACL_IPV4VLAN_PORTS, + }, + { + .type = RTE_ACL_FIELD_TYPE_RANGE, + .size = sizeof(uint16_t), + .field_index = RTE_ACL_IPV4VLAN_DSTP_FIELD, + .input_index = RTE_ACL_IPV4VLAN_PORTS, + }, + }; + + memcpy(&cfg->defs, ipv4_defs, sizeof(ipv4_defs)); + cfg->num_fields = RTE_DIM(ipv4_defs); + + cfg->defs[RTE_ACL_IPV4VLAN_PROTO_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_PROTO]; + cfg->defs[RTE_ACL_IPV4VLAN_VLAN1_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_VLAN]; + cfg->defs[RTE_ACL_IPV4VLAN_VLAN2_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_VLAN] + + cfg->defs[RTE_ACL_IPV4VLAN_VLAN1_FIELD].size; + cfg->defs[RTE_ACL_IPV4VLAN_SRC_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_SRC]; + cfg->defs[RTE_ACL_IPV4VLAN_DST_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_DST]; + cfg->defs[RTE_ACL_IPV4VLAN_SRCP_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_PORTS]; + cfg->defs[RTE_ACL_IPV4VLAN_DSTP_FIELD].offset = + layout[RTE_ACL_IPV4VLAN_PORTS] + + cfg->defs[RTE_ACL_IPV4VLAN_SRCP_FIELD].size; + + cfg->num_categories = num_categories; +} + +static int +convert_rules(struct rte_acl_ctx *acx, + void (*convert)(const struct rte_acl_ipv4vlan_rule *, + struct acl_ipv4vlan_rule *), + const struct rte_acl_ipv4vlan_rule *rules, uint32_t num) +{ + int32_t rc; + uint32_t i; + struct acl_ipv4vlan_rule r; + + for (i = 0; i != num; i++) { + convert(rules + i, &r); + rc = rte_acl_add_rules(acx, (struct rte_acl_rule *)&r, 1); + if (rc != 0) { + printf("Line %i: Adding rule %u to ACL context " + "failed with error code: %d\n", + __LINE__, i, rc); + return rc; + } + } + + return 0; +} + +static void +convert_config(struct rte_acl_config *cfg) +{ + ipv4vlan_config(cfg, ipv4_7tuple_layout, RTE_ACL_MAX_CATEGORIES); +} + +/* + * Convert rte_acl_ipv4vlan_rule to use RTE_ACL_FIELD_TYPE_BITMASK. + */ +static void +convert_config_1(struct rte_acl_config *cfg) +{ + ipv4vlan_config(cfg, ipv4_7tuple_layout, RTE_ACL_MAX_CATEGORIES); + cfg->defs[RTE_ACL_IPV4VLAN_SRC_FIELD].type = RTE_ACL_FIELD_TYPE_BITMASK; + cfg->defs[RTE_ACL_IPV4VLAN_DST_FIELD].type = RTE_ACL_FIELD_TYPE_BITMASK; +} + +/* + * Convert rte_acl_ipv4vlan_rule to use RTE_ACL_FIELD_TYPE_RANGE. + */ +static void +convert_config_2(struct rte_acl_config *cfg) +{ + ipv4vlan_config(cfg, ipv4_7tuple_layout, RTE_ACL_MAX_CATEGORIES); + cfg->defs[RTE_ACL_IPV4VLAN_SRC_FIELD].type = RTE_ACL_FIELD_TYPE_RANGE; + cfg->defs[RTE_ACL_IPV4VLAN_DST_FIELD].type = RTE_ACL_FIELD_TYPE_RANGE; +} + +/* + * Convert rte_acl_ipv4vlan_rule: swap VLAN and PORTS rule definitions. + */ +static void +convert_config_3(struct rte_acl_config *cfg) +{ + struct rte_acl_field_def t1, t2; + + ipv4vlan_config(cfg, ipv4_7tuple_layout, RTE_ACL_MAX_CATEGORIES); + + t1 = cfg->defs[RTE_ACL_IPV4VLAN_VLAN1_FIELD]; + t2 = cfg->defs[RTE_ACL_IPV4VLAN_VLAN2_FIELD]; + + /* swap VLAN1 and SRCP rule definition. */ + cfg->defs[RTE_ACL_IPV4VLAN_VLAN1_FIELD] = + cfg->defs[RTE_ACL_IPV4VLAN_SRCP_FIELD]; + cfg->defs[RTE_ACL_IPV4VLAN_VLAN1_FIELD].field_index = t1.field_index; + cfg->defs[RTE_ACL_IPV4VLAN_VLAN1_FIELD].input_index = t1.input_index; + + /* swap VLAN2 and DSTP rule definition. */ + cfg->defs[RTE_ACL_IPV4VLAN_VLAN2_FIELD] = + cfg->defs[RTE_ACL_IPV4VLAN_DSTP_FIELD]; + cfg->defs[RTE_ACL_IPV4VLAN_VLAN2_FIELD].field_index = t2.field_index; + cfg->defs[RTE_ACL_IPV4VLAN_VLAN2_FIELD].input_index = t2.input_index; + + cfg->defs[RTE_ACL_IPV4VLAN_SRCP_FIELD].type = t1.type; + cfg->defs[RTE_ACL_IPV4VLAN_SRCP_FIELD].size = t1.size; + cfg->defs[RTE_ACL_IPV4VLAN_SRCP_FIELD].offset = t1.offset; + + cfg->defs[RTE_ACL_IPV4VLAN_DSTP_FIELD].type = t2.type; + cfg->defs[RTE_ACL_IPV4VLAN_DSTP_FIELD].size = t2.size; + cfg->defs[RTE_ACL_IPV4VLAN_DSTP_FIELD].offset = t2.offset; +} + +/* + * Convert rte_acl_ipv4vlan_rule: swap SRC and DST ip address rule definitions. + */ +static void +convert_config_4(struct rte_acl_config *cfg) +{ + struct rte_acl_field_def t; + + ipv4vlan_config(cfg, ipv4_7tuple_layout, RTE_ACL_MAX_CATEGORIES); + + t = cfg->defs[RTE_ACL_IPV4VLAN_SRC_FIELD]; + + cfg->defs[RTE_ACL_IPV4VLAN_SRC_FIELD] = + cfg->defs[RTE_ACL_IPV4VLAN_DST_FIELD]; + cfg->defs[RTE_ACL_IPV4VLAN_SRC_FIELD].field_index = t.field_index; + cfg->defs[RTE_ACL_IPV4VLAN_SRC_FIELD].input_index = t.input_index; + + cfg->defs[RTE_ACL_IPV4VLAN_DST_FIELD].type = t.type; + cfg->defs[RTE_ACL_IPV4VLAN_DST_FIELD].size = t.size; + cfg->defs[RTE_ACL_IPV4VLAN_DST_FIELD].offset = t.offset; +} + + +static int +build_convert_rules(struct rte_acl_ctx *acx, + void (*config)(struct rte_acl_config *), + size_t max_size) +{ + struct rte_acl_config cfg; + + memset(&cfg, 0, sizeof(cfg)); + config(&cfg); + cfg.max_size = max_size; + return rte_acl_build(acx, &cfg); +} + +static int +test_convert_rules(const char *desc, + void (*config)(struct rte_acl_config *), + void (*convert)(const struct rte_acl_ipv4vlan_rule *, + struct acl_ipv4vlan_rule *)) +{ + struct rte_acl_ctx *acx; + int32_t rc; + uint32_t i; + static const size_t mem_sizes[] = {0, -1}; + + printf("running %s(%s)\n", __func__, desc); + + acx = rte_acl_create(&acl_param); + if (acx == NULL) { + printf("Line %i: Error creating ACL context!\n", __LINE__); + return -1; + } + + rc = convert_rules(acx, convert, acl_test_rules, + RTE_DIM(acl_test_rules)); + if (rc != 0) + printf("Line %i: Error converting ACL rules!\n", __LINE__); + + for (i = 0; rc == 0 && i != RTE_DIM(mem_sizes); i++) { + + rc = build_convert_rules(acx, config, mem_sizes[i]); + if (rc != 0) { + printf("Line %i: Error @ build_convert_rules(%zu)!\n", + __LINE__, mem_sizes[i]); + break; + } + + rc = test_classify_run(acx); + if (rc != 0) + printf("%s failed at line %i, max_size=%zu\n", + __func__, __LINE__, mem_sizes[i]); + } + + rte_acl_free(acx); + return rc; +} + +static int +test_convert(void) +{ + static const struct { + const char *desc; + void (*config)(struct rte_acl_config *); + void (*convert)(const struct rte_acl_ipv4vlan_rule *, + struct acl_ipv4vlan_rule *); + } convert_param[] = { + { + "acl_ipv4vlan_tuple", + convert_config, + convert_rule, + }, + { + "acl_ipv4vlan_tuple, RTE_ACL_FIELD_TYPE_BITMASK type " + "for IPv4", + convert_config_1, + convert_rule_1, + }, + { + "acl_ipv4vlan_tuple, RTE_ACL_FIELD_TYPE_RANGE type " + "for IPv4", + convert_config_2, + convert_rule_2, + }, + { + "acl_ipv4vlan_tuple: swap VLAN and PORTs order", + convert_config_3, + convert_rule_3, + }, + { + "acl_ipv4vlan_tuple: swap SRC and DST IPv4 order", + convert_config_4, + convert_rule_4, + }, + }; + + uint32_t i; + int32_t rc; + + for (i = 0; i != RTE_DIM(convert_param); i++) { + rc = test_convert_rules(convert_param[i].desc, + convert_param[i].config, + convert_param[i].convert); + if (rc != 0) { + printf("%s for test-case: %s failed, error code: %d;\n", + __func__, convert_param[i].desc, rc); + return rc; + } + } + + return 0; +} + +/* + * Test wrong layout behavior + * This test supplies the ACL context with invalid layout, which results in + * ACL matching the wrong stuff. However, it should match the wrong stuff + * the right way. We switch around source and destination addresses, + * source and destination ports, and protocol will point to first byte of + * destination port. + */ +static int +test_invalid_layout(void) +{ + struct rte_acl_ctx *acx; + int ret, i; + + uint32_t results[RTE_DIM(invalid_layout_data)]; + const uint8_t *data[RTE_DIM(invalid_layout_data)]; + + const uint32_t layout[RTE_ACL_IPV4VLAN_NUM] = { + /* proto points to destination port's first byte */ + offsetof(struct ipv4_7tuple, port_dst), + + 0, /* VLAN not used */ + + /* src and dst addresses are swapped */ + offsetof(struct ipv4_7tuple, ip_dst), + offsetof(struct ipv4_7tuple, ip_src), + + /* + * we can't swap ports here, so we will swap + * them in the data + */ + offsetof(struct ipv4_7tuple, port_src), + }; + + acx = rte_acl_create(&acl_param); + if (acx == NULL) { + printf("Line %i: Error creating ACL context!\n", __LINE__); + return -1; + } + + /* putting a lot of rules into the context results in greater + * coverage numbers. it doesn't matter if they are identical */ + for (i = 0; i < 1000; i++) { + /* add rules to the context */ + ret = rte_acl_ipv4vlan_add_rules(acx, invalid_layout_rules, + RTE_DIM(invalid_layout_rules)); + if (ret != 0) { + printf("Line %i: Adding rules to ACL context failed!\n", + __LINE__); + rte_acl_free(acx); + return -1; + } + } + + /* try building the context */ + ret = rte_acl_ipv4vlan_build(acx, layout, 1); + if (ret != 0) { + printf("Line %i: Building ACL context failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /* swap all bytes in the data to network order */ + bswap_test_data(invalid_layout_data, RTE_DIM(invalid_layout_data), 1); + + /* prepare data */ + for (i = 0; i < (int) RTE_DIM(invalid_layout_data); i++) { + data[i] = (uint8_t *)&invalid_layout_data[i]; + } + + /* classify tuples */ + ret = rte_acl_classify_alg(acx, data, results, + RTE_DIM(results), 1, RTE_ACL_CLASSIFY_SCALAR); + if (ret != 0) { + printf("Line %i: SSE classify failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + for (i = 0; i < (int) RTE_DIM(results); i++) { + if (results[i] != invalid_layout_data[i].allow) { + printf("Line %i: Wrong results at %i " + "(result=%u, should be %u)!\n", + __LINE__, i, results[i], + invalid_layout_data[i].allow); + goto err; + } + } + + /* classify tuples (scalar) */ + ret = rte_acl_classify_alg(acx, data, results, RTE_DIM(results), 1, + RTE_ACL_CLASSIFY_SCALAR); + + if (ret != 0) { + printf("Line %i: Scalar classify failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + for (i = 0; i < (int) RTE_DIM(results); i++) { + if (results[i] != invalid_layout_data[i].allow) { + printf("Line %i: Wrong results at %i " + "(result=%u, should be %u)!\n", + __LINE__, i, results[i], + invalid_layout_data[i].allow); + goto err; + } + } + + rte_acl_free(acx); + + /* swap data back to cpu order so that next time tests don't fail */ + bswap_test_data(invalid_layout_data, RTE_DIM(invalid_layout_data), 0); + + return 0; +err: + + /* swap data back to cpu order so that next time tests don't fail */ + bswap_test_data(invalid_layout_data, RTE_DIM(invalid_layout_data), 0); + + rte_acl_free(acx); + + return -1; +} + +/* + * Test creating and finding ACL contexts, and adding rules + */ +static int +test_create_find_add(void) +{ + struct rte_acl_param param; + struct rte_acl_ctx *acx, *acx2, *tmp; + struct rte_acl_ipv4vlan_rule rules[LEN]; + + const uint32_t layout[RTE_ACL_IPV4VLAN_NUM] = {0}; + + const char *acx_name = "acx"; + const char *acx2_name = "acx2"; + int i, ret; + + /* create two contexts */ + memcpy(¶m, &acl_param, sizeof(param)); + param.max_rule_num = 2; + + param.name = acx_name; + acx = rte_acl_create(¶m); + if (acx == NULL) { + printf("Line %i: Error creating %s!\n", __LINE__, acx_name); + return -1; + } + + param.name = acx2_name; + acx2 = rte_acl_create(¶m); + if (acx2 == NULL || acx2 == acx) { + printf("Line %i: Error creating %s!\n", __LINE__, acx2_name); + rte_acl_free(acx); + return -1; + } + + /* try to create third one, with an existing name */ + param.name = acx_name; + tmp = rte_acl_create(¶m); + if (tmp != acx) { + printf("Line %i: Creating context with existing name " + "test failed!\n", + __LINE__); + if (tmp) + rte_acl_free(tmp); + goto err; + } + + param.name = acx2_name; + tmp = rte_acl_create(¶m); + if (tmp != acx2) { + printf("Line %i: Creating context with existing " + "name test 2 failed!\n", + __LINE__); + if (tmp) + rte_acl_free(tmp); + goto err; + } + + /* try to find existing ACL contexts */ + tmp = rte_acl_find_existing(acx_name); + if (tmp != acx) { + printf("Line %i: Finding %s failed!\n", __LINE__, acx_name); + if (tmp) + rte_acl_free(tmp); + goto err; + } + + tmp = rte_acl_find_existing(acx2_name); + if (tmp != acx2) { + printf("Line %i: Finding %s failed!\n", __LINE__, acx2_name); + if (tmp) + rte_acl_free(tmp); + goto err; + } + + /* try to find non-existing context */ + tmp = rte_acl_find_existing("invalid"); + if (tmp != NULL) { + printf("Line %i: Non-existent ACL context found!\n", __LINE__); + goto err; + } + + /* free context */ + rte_acl_free(acx); + + + /* create valid (but severely limited) acx */ + memcpy(¶m, &acl_param, sizeof(param)); + param.max_rule_num = LEN; + + acx = rte_acl_create(¶m); + if (acx == NULL) { + printf("Line %i: Error creating %s!\n", __LINE__, param.name); + goto err; + } + + /* create dummy acl */ + for (i = 0; i < LEN; i++) { + memcpy(&rules[i], &acl_rule, + sizeof(struct rte_acl_ipv4vlan_rule)); + /* skip zero */ + rules[i].data.userdata = i + 1; + /* one rule per category */ + rules[i].data.category_mask = 1 << i; + } + + /* try filling up the context */ + ret = rte_acl_ipv4vlan_add_rules(acx, rules, LEN); + if (ret != 0) { + printf("Line %i: Adding %i rules to ACL context failed!\n", + __LINE__, LEN); + goto err; + } + + /* try adding to a (supposedly) full context */ + ret = rte_acl_ipv4vlan_add_rules(acx, rules, 1); + if (ret == 0) { + printf("Line %i: Adding rules to full ACL context should" + "have failed!\n", __LINE__); + goto err; + } + + /* try building the context */ + ret = rte_acl_ipv4vlan_build(acx, layout, RTE_ACL_MAX_CATEGORIES); + if (ret != 0) { + printf("Line %i: Building ACL context failed!\n", __LINE__); + goto err; + } + + rte_acl_free(acx); + rte_acl_free(acx2); + + return 0; +err: + rte_acl_free(acx); + rte_acl_free(acx2); + return -1; +} + +/* + * test various invalid rules + */ +static int +test_invalid_rules(void) +{ + struct rte_acl_ctx *acx; + int ret; + + struct rte_acl_ipv4vlan_rule rule; + + acx = rte_acl_create(&acl_param); + if (acx == NULL) { + printf("Line %i: Error creating ACL context!\n", __LINE__); + return -1; + } + + /* test inverted high/low source and destination ports. + * originally, there was a problem with memory consumption when using + * such rules. + */ + /* create dummy acl */ + memcpy(&rule, &acl_rule, sizeof(struct rte_acl_ipv4vlan_rule)); + rule.data.userdata = 1; + rule.dst_port_low = 0xfff0; + rule.dst_port_high = 0x0010; + + /* add rules to context and try to build it */ + ret = rte_acl_ipv4vlan_add_rules(acx, &rule, 1); + if (ret == 0) { + printf("Line %i: Adding rules to ACL context " + "should have failed!\n", __LINE__); + goto err; + } + + rule.dst_port_low = 0x0; + rule.dst_port_high = 0xffff; + rule.src_port_low = 0xfff0; + rule.src_port_high = 0x0010; + + /* add rules to context and try to build it */ + ret = rte_acl_ipv4vlan_add_rules(acx, &rule, 1); + if (ret == 0) { + printf("Line %i: Adding rules to ACL context " + "should have failed!\n", __LINE__); + goto err; + } + + rule.dst_port_low = 0x0; + rule.dst_port_high = 0xffff; + rule.src_port_low = 0x0; + rule.src_port_high = 0xffff; + + rule.dst_mask_len = 33; + + /* add rules to context and try to build it */ + ret = rte_acl_ipv4vlan_add_rules(acx, &rule, 1); + if (ret == 0) { + printf("Line %i: Adding rules to ACL context " + "should have failed!\n", __LINE__); + goto err; + } + + rule.dst_mask_len = 0; + rule.src_mask_len = 33; + + /* add rules to context and try to build it */ + ret = rte_acl_ipv4vlan_add_rules(acx, &rule, 1); + if (ret == 0) { + printf("Line %i: Adding rules to ACL context " + "should have failed!\n", __LINE__); + goto err; + } + + rte_acl_free(acx); + + return 0; + +err: + rte_acl_free(acx); + + return -1; +} + +/* + * test functions by passing invalid or + * non-workable parameters. + * + * we do very limited testing of classify functions here + * because those are performance-critical and + * thus don't do much parameter checking. + */ +static int +test_invalid_parameters(void) +{ + struct rte_acl_param param; + struct rte_acl_ctx *acx; + struct rte_acl_ipv4vlan_rule rule; + int result; + + uint32_t layout[RTE_ACL_IPV4VLAN_NUM] = {0}; + + + /** + * rte_ac_create() + */ + + /* NULL param */ + acx = rte_acl_create(NULL); + if (acx != NULL) { + printf("Line %i: ACL context creation with NULL param " + "should have failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /* zero rule size */ + memcpy(¶m, &acl_param, sizeof(param)); + param.rule_size = 0; + + acx = rte_acl_create(¶m); + if (acx == NULL) { + printf("Line %i: ACL context creation with zero rule len " + "failed!\n", __LINE__); + return -1; + } else + rte_acl_free(acx); + + /* zero max rule num */ + memcpy(¶m, &acl_param, sizeof(param)); + param.max_rule_num = 0; + + acx = rte_acl_create(¶m); + if (acx == NULL) { + printf("Line %i: ACL context creation with zero rule num " + "failed!\n", __LINE__); + return -1; + } else + rte_acl_free(acx); + + /* invalid NUMA node */ + memcpy(¶m, &acl_param, sizeof(param)); + param.socket_id = RTE_MAX_NUMA_NODES + 1; + + acx = rte_acl_create(¶m); + if (acx != NULL) { + printf("Line %i: ACL context creation with invalid NUMA " + "should have failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /* NULL name */ + memcpy(¶m, &acl_param, sizeof(param)); + param.name = NULL; + + acx = rte_acl_create(¶m); + if (acx != NULL) { + printf("Line %i: ACL context creation with NULL name " + "should have failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /** + * rte_acl_find_existing + */ + + acx = rte_acl_find_existing(NULL); + if (acx != NULL) { + printf("Line %i: NULL ACL context found!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /** + * rte_acl_ipv4vlan_add_rules + */ + + /* initialize everything */ + memcpy(¶m, &acl_param, sizeof(param)); + acx = rte_acl_create(¶m); + if (acx == NULL) { + printf("Line %i: ACL context creation failed!\n", __LINE__); + return -1; + } + + memcpy(&rule, &acl_rule, sizeof(rule)); + + /* NULL context */ + result = rte_acl_ipv4vlan_add_rules(NULL, &rule, 1); + if (result == 0) { + printf("Line %i: Adding rules with NULL ACL context " + "should have failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /* NULL rule */ + result = rte_acl_ipv4vlan_add_rules(acx, NULL, 1); + if (result == 0) { + printf("Line %i: Adding NULL rule to ACL context " + "should have failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /* zero count (should succeed) */ + result = rte_acl_ipv4vlan_add_rules(acx, &rule, 0); + if (result != 0) { + printf("Line %i: Adding 0 rules to ACL context failed!\n", + __LINE__); + rte_acl_free(acx); + return -1; + } + + /* free ACL context */ + rte_acl_free(acx); + + + /** + * rte_acl_ipv4vlan_build + */ + + /* reinitialize context */ + memcpy(¶m, &acl_param, sizeof(param)); + acx = rte_acl_create(¶m); + if (acx == NULL) { + printf("Line %i: ACL context creation failed!\n", __LINE__); + return -1; + } + + /* NULL context */ + result = rte_acl_ipv4vlan_build(NULL, layout, 1); + if (result == 0) { + printf("Line %i: Building with NULL context " + "should have failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /* NULL layout */ + result = rte_acl_ipv4vlan_build(acx, NULL, 1); + if (result == 0) { + printf("Line %i: Building with NULL layout " + "should have failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /* zero categories (should not fail) */ + result = rte_acl_ipv4vlan_build(acx, layout, 0); + if (result == 0) { + printf("Line %i: Building with 0 categories should fail!\n", + __LINE__); + rte_acl_free(acx); + return -1; + } + + /* SSE classify test */ + + /* cover zero categories in classify (should not fail) */ + result = rte_acl_classify(acx, NULL, NULL, 0, 0); + if (result != 0) { + printf("Line %i: SSE classify with zero categories " + "failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /* cover invalid but positive categories in classify */ + result = rte_acl_classify(acx, NULL, NULL, 0, 3); + if (result == 0) { + printf("Line %i: SSE classify with 3 categories " + "should have failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /* scalar classify test */ + + /* cover zero categories in classify (should not fail) */ + result = rte_acl_classify_alg(acx, NULL, NULL, 0, 0, + RTE_ACL_CLASSIFY_SCALAR); + if (result != 0) { + printf("Line %i: Scalar classify with zero categories " + "failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /* cover invalid but positive categories in classify */ + result = rte_acl_classify(acx, NULL, NULL, 0, 3); + if (result == 0) { + printf("Line %i: Scalar classify with 3 categories " + "should have failed!\n", __LINE__); + rte_acl_free(acx); + return -1; + } + + /* free ACL context */ + rte_acl_free(acx); + + + /** + * make sure void functions don't crash with NULL parameters + */ + + rte_acl_free(NULL); + + rte_acl_dump(NULL); + + return 0; +} + +/** + * Various tests that don't test much but improve coverage + */ +static int +test_misc(void) +{ + struct rte_acl_param param; + struct rte_acl_ctx *acx; + + /* create context */ + memcpy(¶m, &acl_param, sizeof(param)); + + acx = rte_acl_create(¶m); + if (acx == NULL) { + printf("Line %i: Error creating ACL context!\n", __LINE__); + return -1; + } + + /* dump context with rules - useful for coverage */ + rte_acl_list_dump(); + + rte_acl_dump(acx); + + rte_acl_free(acx); + + return 0; +} + +static int +test_acl(void) +{ + if (test_invalid_parameters() < 0) + return -1; + if (test_invalid_rules() < 0) + return -1; + if (test_create_find_add() < 0) + return -1; + if (test_invalid_layout() < 0) + return -1; + if (test_misc() < 0) + return -1; + if (test_classify() < 0) + return -1; + if (test_build_ports_range() < 0) + return -1; + if (test_convert() < 0) + return -1; + + return 0; +} + +REGISTER_TEST_COMMAND(acl_autotest, test_acl); |