summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnxt/hsi_struct_def_dpdk.h
blob: cb8660af5e74869c1a5021295f5fd7e6c47362a3 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
2660
2661
2662
2663
2664
2665
2666
2667
2668
2669
2670
2671
2672
2673
2674
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
2685
2686
2687
2688
2689
2690
2691
2692
2693
2694
2695
2696
2697
2698
2699
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2851
2852
2853
2854
2855
2856
2857
2858
2859
2860
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
3001
3002
3003
3004
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
3018
3019
3020
3021
3022
3023
3024
3025
3026
3027
3028
3029
3030
3031
3032
3033
3034
3035
3036
3037
3038
3039
3040
3041
3042
3043
3044
3045
3046
3047
3048
3049
3050
3051
3052
3053
3054
3055
3056
3057
3058
3059
3060
3061
3062
3063
3064
3065
3066
3067
3068
3069
3070
3071
3072
3073
3074
3075
3076
3077
3078
3079
3080
3081
3082
3083
3084
3085
3086
3087
3088
3089
3090
3091
3092
3093
3094
3095
3096
3097
3098
3099
3100
3101
3102
3103
3104
3105
3106
3107
3108
3109
3110
3111
3112
3113
3114
3115
3116
3117
3118
3119
3120
3121
3122
3123
3124
3125
3126
3127
3128
3129
3130
3131
3132
3133
3134
3135
3136
3137
3138
3139
3140
3141
3142
3143
3144
3145
3146
3147
3148
3149
3150
3151
3152
3153
3154
3155
3156
3157
3158
3159
3160
3161
3162
3163
3164
3165
3166
3167
3168
3169
3170
3171
3172
3173
3174
3175
3176
3177
3178
3179
3180
3181
3182
3183
3184
3185
3186
3187
3188
3189
3190
3191
3192
3193
3194
3195
3196
3197
3198
3199
3200
3201
3202
3203
3204
3205
3206
3207
3208
3209
3210
3211
3212
3213
3214
3215
3216
3217
3218
3219
3220
3221
3222
3223
3224
3225
3226
3227
3228
3229
3230
3231
3232
3233
3234
3235
3236
3237
3238
3239
3240
3241
3242
3243
3244
3245
3246
3247
3248
3249
3250
3251
3252
3253
3254
3255
3256
3257
3258
3259
3260
3261
3262
3263
3264
3265
3266
3267
3268
3269
3270
3271
3272
3273
3274
3275
3276
3277
3278
3279
3280
3281
3282
3283
3284
3285
3286
3287
3288
3289
3290
3291
3292
3293
3294
3295
3296
3297
3298
3299
3300
3301
3302
3303
3304
3305
3306
3307
3308
3309
3310
3311
3312
3313
3314
3315
3316
3317
3318
3319
3320
3321
3322
3323
3324
3325
3326
3327
3328
3329
3330
3331
3332
3333
3334
3335
3336
3337
3338
3339
3340
3341
3342
3343
3344
3345
3346
3347
3348
3349
3350
3351
3352
3353
3354
3355
3356
3357
3358
3359
3360
3361
3362
3363
3364
3365
3366
3367
3368
3369
3370
3371
3372
3373
3374
3375
3376
3377
3378
3379
3380
3381
3382
3383
3384
3385
3386
3387
3388
3389
3390
3391
3392
3393
3394
3395
3396
3397
3398
3399
3400
3401
3402
3403
3404
3405
3406
3407
3408
3409
3410
3411
3412
3413
3414
3415
3416
3417
3418
3419
3420
3421
3422
3423
3424
3425
3426
3427
3428
3429
3430
3431
3432
3433
3434
3435
3436
3437
3438
3439
3440
3441
3442
3443
3444
3445
3446
3447
3448
3449
3450
3451
3452
3453
3454
3455
3456
3457
3458
3459
3460
3461
3462
3463
3464
3465
3466
3467
3468
3469
3470
3471
3472
3473
3474
3475
3476
3477
3478
3479
3480
3481
3482
3483
3484
3485
3486
3487
3488
3489
3490
3491
3492
3493
3494
3495
3496
3497
3498
3499
3500
3501
3502
3503
3504
3505
3506
3507
3508
3509
3510
3511
3512
3513
3514
3515
3516
3517
3518
3519
3520
3521
3522
3523
3524
3525
3526
3527
3528
3529
3530
3531
3532
3533
3534
3535
3536
3537
3538
3539
3540
3541
3542
3543
3544
3545
3546
3547
3548
3549
3550
3551
3552
3553
3554
3555
3556
3557
3558
3559
3560
3561
3562
3563
3564
3565
3566
3567
3568
3569
3570
3571
3572
3573
3574
3575
3576
3577
3578
3579
3580
3581
3582
3583
3584
3585
3586
3587
3588
3589
3590
3591
3592
3593
3594
3595
3596
3597
3598
3599
3600
3601
3602
3603
3604
3605
3606
3607
3608
3609
3610
3611
3612
3613
3614
3615
3616
3617
3618
3619
3620
3621
3622
3623
3624
3625
3626
3627
3628
3629
3630
3631
3632
3633
3634
3635
3636
3637
3638
3639
3640
3641
3642
3643
3644
3645
3646
3647
3648
3649
3650
3651
3652
3653
3654
3655
3656
3657
3658
3659
3660
3661
3662
3663
3664
3665
3666
3667
3668
3669
3670
3671
3672
3673
3674
3675
3676
3677
3678
3679
3680
3681
3682
3683
3684
3685
3686
3687
3688
3689
3690
3691
3692
3693
3694
3695
3696
3697
3698
3699
3700
3701
3702
3703
3704
3705
3706
3707
3708
3709
3710
3711
3712
3713
3714
3715
3716
3717
3718
3719
3720
3721
3722
3723
3724
3725
3726
3727
3728
3729
3730
3731
3732
3733
3734
3735
3736
3737
3738
3739
3740
3741
3742
3743
3744
3745
3746
3747
3748
3749
3750
3751
3752
3753
3754
3755
3756
3757
3758
3759
3760
3761
3762
3763
3764
3765
3766
3767
3768
3769
3770
3771
3772
3773
3774
3775
3776
3777
3778
3779
3780
3781
3782
3783
3784
3785
3786
3787
3788
3789
3790
3791
3792
3793
3794
3795
3796
3797
3798
3799
3800
3801
3802
3803
3804
3805
3806
3807
3808
3809
3810
3811
3812
3813
3814
3815
3816
3817
3818
3819
3820
3821
3822
3823
3824
3825
3826
3827
3828
3829
3830
3831
3832
3833
3834
3835
3836
3837
3838
3839
3840
3841
3842
3843
3844
3845
3846
3847
3848
3849
3850
3851
3852
3853
3854
3855
3856
3857
3858
3859
3860
3861
3862
3863
3864
3865
3866
3867
3868
3869
3870
3871
3872
3873
3874
3875
3876
3877
3878
3879
3880
3881
3882
3883
3884
3885
3886
3887
3888
3889
3890
3891
3892
3893
3894
3895
3896
3897
3898
3899
3900
3901
3902
3903
3904
3905
3906
3907
3908
3909
3910
3911
3912
3913
3914
3915
3916
3917
3918
3919
3920
3921
3922
3923
3924
3925
3926
3927
3928
3929
3930
3931
3932
3933
3934
3935
3936
3937
3938
3939
3940
3941
3942
3943
3944
3945
3946
3947
3948
3949
3950
3951
3952
3953
3954
3955
3956
3957
3958
3959
3960
3961
3962
3963
3964
3965
3966
3967
3968
3969
3970
3971
3972
3973
3974
3975
3976
3977
3978
3979
3980
3981
3982
3983
3984
3985
3986
3987
3988
3989
3990
3991
3992
3993
3994
3995
3996
3997
3998
3999
4000
4001
4002
4003
4004
4005
4006
4007
4008
4009
4010
4011
4012
4013
4014
4015
4016
4017
4018
4019
4020
4021
4022
4023
4024
4025
4026
4027
4028
4029
4030
4031
4032
4033
4034
4035
4036
4037
4038
4039
4040
4041
4042
4043
4044
4045
4046
4047
4048
4049
4050
4051
4052
4053
4054
4055
4056
4057
4058
4059
4060
4061
4062
4063
4064
4065
4066
4067
4068
4069
4070
4071
4072
4073
4074
4075
4076
4077
4078
4079
4080
4081
4082
4083
4084
4085
4086
4087
4088
4089
4090
4091
4092
4093
4094
4095
4096
4097
4098
4099
4100
4101
4102
4103
4104
4105
4106
4107
4108
4109
4110
4111
4112
4113
4114
4115
4116
4117
4118
4119
4120
4121
4122
4123
4124
4125
4126
4127
4128
4129
4130
4131
4132
4133
4134
4135
4136
4137
4138
4139
4140
4141
4142
4143
4144
4145
4146
4147
4148
4149
4150
4151
4152
4153
4154
4155
4156
4157
4158
4159
4160
4161
4162
4163
4164
4165
4166
4167
4168
4169
4170
4171
4172
4173
4174
4175
4176
4177
4178
4179
4180
4181
4182
4183
4184
4185
4186
4187
4188
4189
4190
4191
4192
4193
4194
4195
4196
4197
4198
4199
4200
4201
4202
4203
4204
4205
4206
4207
4208
4209
4210
4211
4212
4213
4214
4215
4216
4217
4218
4219
4220
4221
4222
4223
4224
4225
4226
4227
4228
4229
4230
4231
4232
4233
4234
4235
4236
4237
4238
4239
4240
4241
4242
4243
4244
4245
4246
4247
4248
4249
4250
4251
4252
4253
4254
4255
4256
4257
4258
4259
4260
4261
4262
4263
4264
4265
4266
4267
4268
4269
4270
4271
4272
4273
4274
4275
4276
4277
4278
4279
4280
4281
4282
4283
4284
4285
4286
4287
4288
4289
4290
4291
4292
4293
4294
4295
4296
4297
4298
4299
4300
4301
4302
4303
4304
4305
4306
4307
4308
4309
4310
4311
4312
4313
4314
4315
4316
4317
4318
4319
4320
4321
4322
4323
4324
4325
4326
4327
4328
4329
4330
4331
4332
4333
4334
4335
4336
4337
4338
4339
4340
4341
4342
4343
4344
4345
4346
4347
4348
4349
4350
4351
4352
4353
4354
4355
4356
4357
4358
4359
4360
4361
4362
4363
4364
4365
4366
4367
4368
4369
4370
4371
4372
4373
4374
4375
4376
4377
4378
4379
4380
4381
4382
4383
4384
4385
4386
4387
4388
4389
4390
4391
4392
4393
4394
4395
4396
4397
4398
4399
4400
4401
4402
4403
4404
4405
4406
4407
4408
4409
4410
4411
4412
4413
4414
4415
4416
4417
4418
4419
4420
4421
4422
4423
4424
4425
4426
4427
4428
4429
4430
4431
4432
4433
4434
4435
4436
4437
4438
4439
4440
4441
4442
4443
4444
4445
4446
4447
4448
4449
4450
4451
4452
4453
4454
4455
4456
4457
4458
4459
4460
4461
4462
4463
4464
4465
4466
4467
4468
4469
4470
4471
4472
4473
4474
4475
4476
4477
4478
4479
4480
4481
4482
4483
4484
4485
4486
4487
4488
4489
4490
4491
4492
4493
4494
4495
4496
4497
4498
4499
4500
4501
4502
4503
4504
4505
4506
4507
4508
4509
4510
4511
4512
4513
4514
4515
4516
4517
4518
4519
4520
4521
4522
4523
4524
4525
4526
4527
4528
4529
4530
4531
4532
4533
4534
4535
4536
4537
4538
4539
4540
4541
4542
4543
4544
4545
4546
4547
4548
4549
4550
4551
4552
4553
4554
4555
4556
4557
4558
4559
4560
4561
4562
4563
4564
4565
4566
4567
4568
4569
4570
4571
4572
4573
4574
4575
4576
4577
4578
4579
4580
4581
4582
4583
4584
4585
4586
4587
4588
4589
4590
4591
4592
4593
4594
4595
4596
4597
4598
4599
4600
4601
4602
4603
4604
4605
4606
4607
4608
4609
4610
4611
4612
4613
4614
4615
4616
4617
4618
4619
4620
4621
4622
4623
4624
4625
4626
4627
4628
4629
4630
4631
4632
4633
4634
4635
4636
4637
4638
4639
4640
4641
4642
4643
4644
4645
4646
4647
4648
4649
4650
4651
4652
4653
4654
4655
4656
4657
4658
4659
4660
4661
4662
4663
4664
4665
4666
4667
4668
4669
4670
4671
4672
4673
4674
4675
4676
4677
4678
4679
4680
4681
4682
4683
4684
4685
4686
4687
4688
4689
4690
4691
4692
4693
4694
4695
4696
4697
4698
4699
4700
4701
4702
4703
4704
4705
4706
4707
4708
4709
4710
4711
4712
4713
4714
4715
4716
4717
4718
4719
4720
4721
4722
4723
4724
4725
4726
4727
4728
4729
4730
4731
4732
4733
4734
4735
4736
4737
4738
4739
4740
4741
4742
4743
4744
4745
4746
4747
4748
4749
4750
4751
4752
4753
4754
4755
4756
4757
4758
4759
4760
4761
4762
4763
4764
4765
4766
4767
4768
4769
4770
4771
4772
4773
4774
4775
4776
4777
4778
4779
4780
4781
4782
4783
4784
4785
4786
4787
4788
4789
4790
4791
4792
4793
4794
4795
4796
4797
4798
4799
4800
4801
4802
4803
4804
4805
4806
4807
4808
4809
4810
4811
4812
4813
4814
4815
4816
4817
4818
4819
4820
4821
4822
4823
4824
4825
4826
4827
4828
4829
4830
4831
4832
4833
4834
4835
4836
4837
4838
4839
4840
4841
4842
4843
4844
4845
4846
4847
4848
4849
4850
4851
4852
4853
4854
4855
4856
4857
4858
4859
4860
4861
4862
4863
4864
4865
4866
4867
4868
4869
4870
4871
4872
4873
4874
4875
4876
4877
4878
4879
4880
4881
4882
4883
4884
4885
4886
4887
4888
4889
4890
4891
4892
4893
4894
4895
4896
4897
4898
4899
4900
4901
4902
4903
4904
4905
4906
4907
4908
4909
4910
4911
4912
4913
4914
4915
4916
4917
4918
4919
4920
4921
4922
4923
4924
4925
4926
4927
4928
4929
4930
4931
4932
4933
4934
4935
4936
4937
4938
4939
4940
4941
4942
4943
4944
4945
4946
4947
4948
4949
4950
4951
4952
4953
4954
4955
4956
4957
4958
4959
4960
4961
4962
4963
4964
4965
4966
4967
4968
4969
4970
4971
4972
4973
4974
4975
4976
4977
4978
4979
4980
4981
4982
4983
4984
4985
4986
4987
4988
4989
4990
4991
4992
4993
4994
4995
4996
4997
4998
4999
5000
5001
5002
5003
5004
5005
5006
5007
5008
5009
5010
5011
5012
5013
5014
5015
5016
5017
5018
5019
5020
5021
5022
5023
5024
5025
5026
5027
5028
5029
5030
5031
5032
5033
5034
5035
5036
5037
5038
5039
5040
5041
5042
5043
5044
5045
5046
5047
5048
5049
5050
5051
5052
5053
5054
5055
5056
5057
5058
5059
5060
5061
5062
5063
5064
5065
5066
5067
5068
5069
5070
5071
5072
5073
5074
5075
5076
5077
5078
5079
5080
5081
5082
5083
5084
5085
5086
5087
5088
5089
5090
5091
5092
5093
5094
5095
5096
5097
5098
5099
5100
5101
5102
5103
5104
5105
5106
5107
5108
5109
5110
5111
5112
5113
5114
5115
5116
5117
5118
5119
5120
5121
5122
5123
5124
5125
5126
5127
5128
5129
5130
5131
5132
5133
5134
5135
5136
5137
5138
5139
5140
5141
5142
5143
5144
5145
5146
5147
5148
5149
5150
5151
5152
5153
5154
5155
5156
5157
5158
5159
5160
5161
5162
5163
5164
5165
5166
5167
5168
5169
5170
5171
5172
5173
5174
5175
5176
5177
5178
5179
5180
5181
5182
5183
5184
5185
5186
5187
5188
5189
5190
5191
5192
5193
5194
5195
5196
5197
5198
5199
5200
5201
5202
5203
5204
5205
5206
5207
5208
5209
5210
5211
5212
5213
5214
5215
5216
5217
5218
5219
5220
5221
5222
5223
5224
5225
5226
5227
5228
5229
5230
5231
5232
5233
5234
5235
5236
5237
5238
5239
5240
5241
5242
5243
5244
5245
5246
5247
5248
5249
5250
5251
5252
5253
5254
5255
5256
5257
5258
5259
5260
5261
5262
5263
5264
5265
5266
5267
5268
5269
5270
5271
5272
5273
5274
5275
5276
5277
5278
5279
5280
5281
5282
5283
5284
5285
5286
5287
5288
5289
5290
5291
5292
5293
5294
5295
5296
5297
5298
5299
5300
5301
5302
5303
5304
5305
5306
5307
5308
5309
5310
5311
5312
5313
5314
5315
5316
5317
5318
5319
5320
5321
5322
5323
5324
5325
5326
5327
5328
5329
5330
5331
5332
5333
5334
5335
5336
5337
5338
5339
5340
5341
5342
5343
5344
5345
5346
5347
5348
5349
5350
5351
5352
5353
5354
5355
5356
5357
5358
5359
5360
5361
5362
5363
5364
5365
5366
5367
5368
5369
5370
5371
5372
5373
5374
5375
5376
5377
5378
5379
5380
5381
5382
5383
5384
5385
5386
5387
5388
5389
5390
5391
5392
5393
5394
5395
5396
5397
5398
5399
5400
5401
5402
5403
5404
5405
5406
5407
5408
5409
5410
5411
5412
5413
5414
5415
5416
5417
5418
5419
5420
5421
5422
5423
5424
5425
5426
5427
5428
5429
5430
5431
5432
5433
5434
5435
5436
5437
5438
5439
5440
5441
5442
5443
5444
5445
5446
5447
5448
5449
5450
5451
5452
5453
5454
5455
5456
5457
5458
5459
5460
5461
5462
5463
5464
5465
5466
5467
5468
5469
5470
5471
5472
5473
5474
5475
5476
5477
5478
5479
5480
5481
5482
5483
5484
5485
5486
5487
5488
5489
5490
5491
5492
5493
5494
5495
5496
5497
5498
5499
5500
5501
5502
5503
5504
5505
5506
5507
5508
5509
5510
5511
5512
5513
5514
5515
5516
5517
5518
5519
5520
5521
5522
5523
5524
5525
5526
5527
5528
5529
5530
5531
5532
5533
5534
5535
5536
5537
5538
5539
5540
5541
5542
5543
5544
5545
5546
5547
5548
5549
5550
5551
5552
5553
5554
5555
5556
5557
5558
5559
5560
5561
5562
5563
5564
5565
5566
5567
5568
5569
5570
5571
5572
5573
5574
5575
5576
5577
5578
5579
5580
5581
5582
5583
5584
5585
5586
5587
5588
5589
5590
5591
5592
5593
5594
5595
5596
5597
5598
5599
5600
5601
5602
5603
5604
5605
5606
5607
5608
5609
5610
5611
5612
5613
5614
5615
5616
5617
5618
5619
5620
5621
5622
5623
5624
5625
5626
5627
5628
5629
5630
5631
5632
5633
5634
5635
5636
5637
5638
5639
5640
5641
5642
5643
5644
5645
5646
5647
5648
5649
5650
5651
5652
5653
5654
5655
5656
5657
5658
5659
5660
5661
5662
5663
5664
5665
5666
5667
5668
5669
5670
5671
5672
5673
5674
5675
5676
5677
5678
5679
5680
5681
5682
5683
5684
5685
5686
5687
5688
5689
5690
5691
5692
5693
5694
5695
5696
5697
5698
5699
5700
5701
5702
5703
5704
5705
5706
5707
5708
5709
5710
5711
5712
5713
5714
5715
5716
5717
5718
5719
5720
5721
5722
5723
5724
5725
5726
5727
5728
5729
5730
5731
5732
5733
5734
5735
5736
5737
5738
5739
5740
5741
5742
5743
5744
5745
5746
5747
5748
5749
5750
5751
5752
5753
5754
5755
5756
5757
5758
5759
5760
5761
5762
5763
5764
5765
5766
5767
5768
5769
5770
5771
5772
5773
5774
5775
5776
5777
5778
5779
5780
5781
5782
5783
5784
5785
5786
5787
5788
5789
5790
5791
5792
5793
5794
5795
5796
5797
5798
5799
5800
5801
5802
5803
5804
5805
5806
5807
5808
5809
5810
5811
5812
5813
5814
5815
5816
5817
5818
5819
5820
5821
5822
5823
5824
5825
5826
5827
5828
5829
5830
5831
5832
5833
5834
5835
5836
5837
5838
5839
5840
5841
5842
5843
5844
5845
5846
5847
5848
5849
5850
5851
5852
5853
5854
5855
5856
5857
5858
5859
5860
5861
5862
5863
5864
5865
5866
5867
5868
5869
5870
5871
5872
5873
5874
5875
5876
5877
5878
5879
5880
5881
5882
5883
5884
5885
5886
5887
5888
5889
5890
5891
5892
5893
5894
5895
5896
5897
5898
5899
5900
5901
5902
5903
5904
5905
5906
5907
5908
5909
5910
5911
5912
5913
5914
5915
5916
5917
5918
5919
5920
5921
5922
5923
5924
5925
5926
5927
5928
5929
5930
5931
5932
5933
5934
5935
5936
5937
5938
5939
5940
5941
5942
5943
5944
5945
5946
5947
5948
5949
5950
5951
5952
5953
5954
5955
5956
5957
5958
5959
5960
5961
5962
5963
5964
5965
5966
5967
5968
5969
5970
5971
5972
5973
5974
5975
5976
5977
5978
5979
5980
5981
5982
5983
5984
5985
5986
5987
5988
5989
5990
5991
5992
5993
5994
5995
5996
5997
5998
5999
6000
6001
6002
6003
6004
6005
6006
6007
6008
6009
6010
6011
6012
6013
6014
6015
6016
6017
6018
6019
6020
6021
6022
6023
6024
6025
6026
6027
6028
6029
6030
6031
6032
6033
6034
6035
6036
6037
6038
6039
6040
6041
6042
6043
6044
6045
6046
6047
6048
6049
6050
6051
6052
6053
6054
6055
6056
6057
6058
6059
6060
6061
6062
6063
6064
6065
6066
6067
6068
6069
6070
6071
6072
6073
6074
6075
6076
6077
6078
6079
6080
6081
6082
6083
6084
6085
6086
6087
6088
6089
6090
6091
6092
6093
6094
6095
6096
6097
6098
6099
6100
6101
6102
6103
6104
6105
6106
6107
6108
6109
6110
6111
6112
6113
6114
6115
6116
6117
6118
6119
6120
6121
6122
6123
6124
6125
6126
6127
6128
6129
6130
6131
6132
6133
6134
6135
6136
6137
6138
6139
6140
6141
6142
6143
6144
6145
6146
6147
6148
6149
6150
6151
6152
6153
6154
6155
6156
6157
6158
6159
6160
6161
6162
6163
6164
6165
6166
6167
6168
6169
6170
6171
6172
6173
6174
6175
6176
6177
6178
6179
6180
6181
6182
6183
6184
6185
6186
6187
6188
6189
6190
6191
6192
6193
6194
6195
6196
6197
6198
6199
6200
6201
6202
6203
6204
6205
6206
6207
6208
6209
6210
6211
6212
6213
6214
6215
6216
6217
6218
6219
6220
6221
6222
6223
6224
6225
6226
6227
6228
6229
6230
6231
6232
6233
6234
6235
6236
6237
6238
6239
6240
6241
6242
6243
6244
6245
6246
6247
6248
6249
6250
6251
6252
6253
6254
6255
6256
6257
6258
6259
6260
6261
6262
6263
6264
6265
6266
6267
6268
6269
6270
6271
6272
6273
6274
6275
6276
6277
6278
6279
6280
6281
6282
6283
6284
6285
6286
6287
6288
6289
6290
6291
6292
6293
6294
6295
6296
6297
6298
6299
6300
6301
6302
6303
6304
6305
6306
6307
6308
6309
6310
6311
6312
6313
6314
6315
6316
6317
6318
6319
6320
6321
6322
6323
6324
6325
6326
6327
6328
6329
6330
6331
6332
6333
6334
6335
6336
6337
6338
6339
6340
6341
6342
6343
6344
6345
6346
6347
6348
6349
6350
6351
6352
6353
6354
6355
6356
6357
6358
6359
6360
6361
6362
6363
6364
6365
6366
6367
6368
6369
6370
6371
6372
6373
6374
6375
6376
6377
6378
6379
6380
6381
6382
6383
6384
6385
6386
6387
6388
6389
6390
6391
6392
6393
6394
6395
6396
6397
6398
6399
6400
6401
6402
6403
6404
6405
6406
6407
6408
6409
6410
6411
6412
6413
6414
6415
6416
6417
6418
6419
6420
6421
6422
6423
6424
6425
6426
6427
6428
6429
6430
6431
6432
6433
6434
6435
6436
6437
6438
6439
6440
6441
6442
6443
6444
6445
6446
6447
6448
6449
6450
6451
6452
6453
6454
6455
6456
6457
6458
6459
6460
6461
6462
6463
6464
6465
6466
6467
6468
6469
6470
6471
6472
6473
6474
6475
6476
6477
6478
6479
6480
6481
6482
6483
6484
6485
6486
6487
6488
6489
6490
6491
6492
6493
6494
6495
6496
6497
6498
6499
6500
6501
6502
6503
6504
6505
6506
6507
6508
6509
6510
6511
6512
6513
6514
6515
6516
6517
6518
6519
6520
6521
6522
6523
6524
6525
6526
6527
6528
6529
6530
6531
6532
6533
6534
6535
6536
6537
6538
6539
6540
6541
6542
6543
6544
6545
6546
6547
6548
6549
6550
6551
6552
6553
6554
6555
6556
6557
6558
6559
6560
6561
6562
6563
6564
6565
6566
6567
6568
6569
6570
6571
6572
6573
6574
6575
6576
6577
6578
6579
6580
6581
6582
6583
6584
6585
6586
6587
6588
6589
6590
6591
6592
6593
6594
6595
6596
6597
6598
6599
6600
6601
6602
6603
6604
6605
6606
6607
6608
6609
6610
6611
6612
6613
6614
6615
6616
6617
6618
6619
6620
6621
6622
6623
6624
6625
6626
6627
6628
6629
6630
6631
6632
6633
6634
6635
6636
6637
6638
6639
6640
6641
6642
6643
6644
6645
6646
6647
6648
6649
6650
6651
6652
6653
6654
6655
6656
6657
6658
6659
6660
6661
6662
6663
6664
6665
6666
6667
6668
6669
6670
6671
6672
6673
6674
6675
6676
6677
6678
6679
6680
6681
6682
6683
6684
6685
6686
6687
6688
6689
6690
6691
6692
6693
6694
6695
6696
6697
6698
6699
6700
6701
6702
6703
6704
6705
6706
6707
6708
6709
6710
6711
6712
6713
6714
6715
6716
6717
6718
6719
6720
6721
6722
6723
6724
6725
6726
6727
6728
6729
6730
6731
6732
6733
6734
6735
6736
6737
6738
6739
6740
6741
6742
6743
6744
6745
6746
6747
6748
6749
6750
6751
6752
6753
6754
6755
6756
6757
6758
6759
6760
6761
6762
6763
6764
6765
6766
6767
6768
6769
6770
6771
6772
6773
6774
6775
6776
6777
6778
6779
6780
6781
6782
6783
6784
6785
6786
6787
6788
6789
6790
6791
6792
6793
6794
6795
6796
6797
6798
6799
6800
6801
6802
6803
6804
6805
6806
6807
6808
6809
6810
6811
6812
6813
6814
6815
6816
6817
6818
6819
6820
6821
6822
6823
6824
6825
6826
6827
6828
6829
6830
6831
6832
6833
6834
6835
6836
6837
6838
6839
6840
6841
6842
6843
6844
6845
6846
6847
6848
6849
6850
6851
6852
6853
6854
6855
6856
6857
6858
6859
6860
6861
6862
6863
6864
6865
6866
6867
6868
6869
6870
6871
6872
6873
6874
6875
6876
6877
6878
6879
6880
6881
6882
6883
6884
6885
6886
6887
6888
6889
6890
6891
6892
6893
6894
6895
6896
6897
6898
6899
6900
6901
6902
6903
6904
6905
6906
6907
6908
6909
6910
6911
6912
6913
6914
6915
6916
6917
6918
6919
6920
6921
6922
6923
6924
6925
6926
6927
6928
6929
6930
6931
6932
6933
6934
6935
6936
6937
6938
6939
6940
6941
6942
6943
6944
6945
6946
6947
6948
6949
6950
6951
6952
6953
6954
6955
6956
6957
6958
6959
6960
6961
6962
6963
6964
6965
6966
6967
6968
6969
6970
6971
6972
6973
6974
6975
6976
6977
6978
6979
6980
6981
6982
6983
6984
6985
6986
6987
6988
6989
6990
6991
6992
6993
6994
6995
6996
6997
6998
6999
7000
7001
7002
7003
7004
7005
7006
7007
7008
7009
7010
7011
7012
7013
7014
7015
7016
7017
7018
7019
7020
7021
7022
7023
7024
7025
7026
7027
7028
7029
7030
7031
7032
7033
7034
7035
7036
7037
7038
7039
7040
7041
7042
7043
7044
7045
7046
7047
7048
7049
7050
7051
7052
7053
7054
7055
7056
7057
7058
7059
7060
7061
7062
7063
7064
7065
7066
7067
7068
7069
7070
7071
7072
7073
7074
7075
7076
7077
7078
7079
7080
7081
7082
7083
7084
7085
7086
7087
7088
7089
7090
7091
7092
7093
7094
7095
7096
7097
7098
7099
7100
7101
7102
7103
7104
7105
7106
7107
7108
7109
7110
7111
7112
7113
7114
7115
7116
7117
7118
7119
7120
7121
7122
7123
7124
7125
7126
7127
7128
7129
7130
7131
7132
7133
7134
7135
7136
7137
7138
7139
7140
7141
7142
7143
7144
7145
7146
7147
7148
7149
7150
7151
7152
7153
7154
7155
7156
7157
7158
7159
7160
7161
7162
7163
7164
7165
7166
7167
7168
7169
7170
7171
7172
7173
7174
7175
7176
7177
7178
7179
7180
7181
7182
7183
7184
7185
7186
7187
7188
7189
7190
7191
7192
7193
7194
7195
7196
7197
7198
7199
7200
7201
7202
7203
7204
7205
7206
7207
7208
7209
7210
7211
7212
7213
7214
7215
7216
7217
7218
7219
7220
7221
7222
7223
7224
7225
7226
7227
7228
7229
7230
7231
7232
7233
7234
7235
7236
7237
7238
7239
7240
7241
7242
7243
7244
7245
7246
7247
7248
7249
7250
7251
7252
7253
7254
7255
7256
7257
7258
7259
7260
7261
7262
7263
7264
7265
7266
7267
7268
7269
7270
7271
7272
7273
7274
7275
7276
7277
7278
7279
7280
7281
7282
7283
7284
7285
7286
7287
7288
7289
7290
7291
7292
7293
7294
7295
7296
7297
7298
7299
7300
7301
7302
7303
7304
7305
7306
7307
7308
7309
7310
7311
7312
7313
7314
7315
7316
7317
7318
7319
7320
7321
7322
7323
7324
7325
7326
7327
7328
7329
7330
7331
7332
7333
7334
7335
7336
7337
7338
7339
7340
7341
7342
7343
7344
7345
7346
7347
7348
7349
7350
7351
7352
7353
7354
7355
7356
7357
7358
7359
7360
7361
7362
7363
7364
7365
7366
7367
7368
7369
7370
7371
7372
7373
7374
7375
7376
7377
7378
7379
7380
7381
7382
7383
7384
7385
7386
7387
7388
7389
7390
7391
7392
7393
7394
7395
7396
7397
7398
7399
7400
7401
7402
7403
7404
7405
7406
7407
7408
7409
7410
7411
7412
7413
7414
7415
7416
7417
7418
7419
7420
7421
7422
7423
7424
7425
7426
7427
7428
7429
7430
7431
7432
7433
7434
7435
7436
7437
7438
7439
7440
7441
7442
7443
7444
7445
7446
7447
7448
7449
7450
7451
7452
7453
7454
7455
7456
7457
7458
7459
7460
7461
7462
7463
7464
7465
7466
7467
7468
7469
7470
7471
7472
7473
7474
7475
7476
7477
7478
7479
7480
7481
7482
7483
7484
7485
7486
7487
7488
7489
7490
7491
7492
7493
7494
7495
7496
7497
7498
7499
7500
7501
7502
7503
7504
7505
7506
7507
7508
7509
7510
7511
7512
7513
7514
7515
7516
7517
7518
7519
7520
7521
7522
7523
7524
7525
7526
7527
7528
7529
7530
7531
7532
7533
7534
7535
7536
7537
7538
7539
7540
7541
7542
7543
7544
7545
7546
7547
7548
7549
7550
7551
7552
7553
7554
7555
7556
7557
7558
7559
7560
7561
7562
7563
7564
7565
7566
7567
7568
7569
7570
7571
7572
7573
7574
7575
7576
7577
7578
7579
7580
7581
7582
7583
7584
7585
7586
7587
7588
7589
7590
7591
7592
7593
7594
7595
7596
7597
7598
7599
7600
7601
7602
7603
7604
7605
7606
7607
7608
7609
7610
7611
7612
7613
7614
7615
7616
7617
7618
7619
7620
7621
7622
7623
7624
7625
7626
7627
7628
7629
7630
7631
7632
7633
7634
7635
7636
7637
7638
7639
7640
7641
7642
7643
7644
7645
7646
7647
7648
7649
7650
7651
7652
7653
7654
7655
7656
7657
7658
7659
7660
7661
7662
7663
7664
7665
7666
7667
7668
7669
7670
7671
7672
7673
7674
7675
7676
7677
7678
7679
7680
7681
7682
7683
7684
7685
7686
7687
7688
7689
7690
7691
7692
7693
7694
7695
7696
7697
7698
7699
7700
7701
7702
7703
7704
7705
7706
7707
7708
7709
7710
7711
7712
7713
7714
7715
7716
7717
7718
7719
7720
7721
7722
7723
7724
7725
7726
7727
7728
7729
7730
7731
7732
7733
7734
7735
7736
7737
7738
7739
7740
7741
7742
7743
7744
7745
7746
7747
7748
7749
7750
7751
7752
7753
7754
7755
7756
7757
7758
7759
7760
7761
7762
7763
7764
7765
7766
7767
7768
7769
7770
7771
7772
7773
7774
7775
7776
7777
7778
7779
7780
7781
7782
7783
7784
7785
7786
7787
7788
7789
7790
7791
7792
7793
7794
7795
7796
7797
7798
7799
7800
7801
7802
7803
7804
7805
7806
7807
7808
7809
7810
7811
7812
7813
7814
7815
7816
7817
7818
7819
7820
7821
7822
7823
7824
7825
7826
7827
7828
7829
7830
7831
7832
7833
7834
7835
7836
7837
7838
7839
7840
7841
7842
7843
7844
7845
7846
7847
7848
7849
7850
7851
7852
7853
7854
7855
7856
7857
7858
7859
7860
7861
7862
7863
7864
7865
7866
7867
7868
7869
7870
7871
7872
7873
7874
7875
7876
7877
7878
7879
7880
7881
7882
7883
7884
7885
7886
7887
7888
7889
7890
7891
7892
7893
7894
7895
7896
7897
7898
7899
7900
7901
7902
7903
7904
7905
7906
7907
7908
7909
7910
7911
7912
7913
7914
7915
7916
7917
7918
7919
7920
7921
7922
7923
7924
7925
7926
7927
7928
7929
7930
7931
7932
7933
7934
7935
7936
7937
7938
7939
7940
7941
7942
7943
7944
7945
7946
7947
7948
7949
7950
7951
7952
7953
7954
7955
7956
7957
7958
7959
7960
7961
7962
7963
7964
7965
7966
7967
7968
7969
7970
7971
7972
7973
7974
7975
7976
7977
7978
7979
7980
7981
7982
7983
7984
7985
7986
7987
7988
7989
7990
7991
7992
7993
7994
7995
7996
7997
7998
7999
8000
8001
8002
8003
8004
8005
8006
8007
8008
8009
8010
8011
8012
8013
8014
8015
8016
8017
8018
8019
8020
8021
8022
8023
8024
8025
8026
8027
8028
8029
8030
8031
8032
8033
8034
8035
8036
8037
8038
8039
8040
8041
8042
8043
8044
8045
8046
8047
8048
8049
8050
8051
8052
8053
8054
8055
8056
8057
8058
8059
8060
8061
8062
8063
8064
8065
8066
8067
8068
8069
8070
8071
8072
8073
8074
8075
8076
8077
8078
8079
8080
8081
8082
8083
8084
8085
8086
8087
8088
8089
8090
8091
8092
8093
8094
8095
8096
8097
8098
8099
8100
8101
8102
8103
8104
8105
8106
8107
8108
8109
8110
8111
8112
8113
8114
8115
8116
8117
8118
8119
8120
8121
8122
8123
8124
8125
8126
8127
8128
8129
8130
8131
8132
8133
8134
8135
8136
8137
8138
8139
8140
8141
8142
8143
8144
8145
8146
8147
8148
8149
8150
8151
8152
8153
8154
8155
8156
8157
8158
8159
8160
8161
8162
8163
8164
8165
8166
8167
8168
8169
8170
8171
8172
8173
8174
8175
8176
8177
8178
8179
8180
8181
8182
8183
8184
8185
8186
8187
8188
8189
8190
8191
8192
8193
8194
8195
8196
8197
8198
8199
8200
8201
8202
8203
8204
8205
8206
8207
8208
8209
8210
8211
8212
8213
8214
8215
8216
8217
8218
8219
8220
8221
8222
8223
8224
8225
8226
8227
8228
8229
8230
8231
8232
8233
8234
8235
8236
8237
8238
8239
8240
8241
8242
8243
8244
8245
8246
8247
8248
8249
8250
8251
8252
8253
8254
8255
8256
8257
8258
8259
8260
8261
8262
8263
8264
8265
8266
8267
8268
8269
8270
8271
8272
8273
8274
8275
8276
8277
8278
8279
8280
8281
8282
8283
8284
8285
8286
8287
8288
8289
8290
8291
8292
8293
8294
8295
8296
8297
8298
8299
8300
8301
8302
8303
8304
8305
8306
8307
8308
8309
8310
8311
8312
8313
8314
8315
8316
8317
8318
8319
8320
8321
8322
8323
8324
8325
8326
8327
8328
8329
8330
8331
8332
8333
8334
8335
8336
8337
8338
8339
8340
8341
8342
8343
8344
8345
8346
8347
8348
8349
8350
8351
8352
8353
8354
8355
8356
8357
8358
8359
8360
8361
8362
8363
8364
8365
8366
8367
8368
8369
8370
8371
8372
8373
8374
8375
8376
8377
8378
8379
8380
8381
8382
8383
8384
8385
8386
8387
8388
8389
8390
8391
8392
8393
8394
8395
8396
8397
8398
8399
8400
8401
8402
8403
8404
8405
8406
8407
8408
8409
8410
8411
8412
8413
8414
8415
8416
8417
8418
8419
8420
8421
8422
8423
8424
8425
8426
8427
8428
8429
8430
8431
8432
8433
8434
8435
8436
8437
8438
8439
8440
8441
8442
8443
8444
8445
8446
8447
8448
8449
8450
8451
8452
8453
8454
8455
8456
8457
8458
8459
8460
8461
8462
8463
8464
8465
8466
8467
8468
8469
8470
8471
8472
8473
8474
8475
8476
8477
8478
8479
8480
8481
8482
8483
8484
8485
8486
8487
8488
8489
8490
8491
8492
8493
8494
8495
8496
8497
8498
8499
8500
8501
8502
8503
8504
8505
8506
8507
8508
8509
8510
8511
8512
8513
8514
8515
8516
8517
8518
8519
8520
8521
8522
8523
8524
8525
8526
8527
8528
8529
8530
8531
8532
8533
8534
8535
8536
8537
8538
8539
8540
8541
8542
8543
8544
8545
8546
8547
8548
8549
8550
8551
8552
8553
8554
8555
8556
8557
8558
8559
8560
8561
8562
8563
8564
8565
8566
8567
8568
8569
8570
8571
8572
8573
8574
8575
8576
8577
8578
8579
8580
8581
8582
8583
8584
8585
8586
8587
8588
8589
8590
8591
8592
8593
8594
8595
8596
8597
8598
8599
8600
8601
8602
8603
8604
8605
8606
8607
8608
8609
8610
8611
8612
8613
8614
8615
8616
8617
8618
8619
8620
8621
8622
8623
8624
8625
8626
8627
8628
8629
8630
8631
8632
8633
8634
8635
8636
8637
8638
8639
8640
8641
8642
8643
8644
8645
8646
8647
8648
8649
8650
8651
8652
8653
8654
8655
8656
8657
8658
8659
8660
8661
8662
8663
8664
8665
8666
8667
8668
8669
8670
8671
8672
8673
8674
8675
8676
8677
8678
8679
8680
8681
8682
8683
8684
8685
8686
8687
8688
8689
8690
8691
8692
8693
8694
8695
8696
8697
8698
8699
8700
8701
8702
8703
8704
8705
8706
8707
8708
8709
8710
8711
8712
8713
8714
8715
8716
8717
8718
8719
8720
8721
8722
8723
8724
8725
8726
8727
8728
8729
8730
8731
8732
8733
8734
8735
8736
8737
8738
8739
8740
8741
8742
8743
8744
8745
8746
8747
8748
8749
8750
8751
8752
8753
8754
8755
8756
8757
8758
8759
8760
8761
8762
8763
8764
8765
8766
8767
8768
8769
8770
8771
8772
8773
8774
8775
8776
8777
8778
8779
8780
8781
8782
8783
8784
8785
8786
8787
8788
8789
8790
8791
8792
8793
8794
8795
8796
8797
8798
8799
8800
8801
8802
8803
8804
8805
8806
8807
8808
8809
8810
8811
8812
8813
8814
8815
8816
8817
8818
8819
8820
8821
8822
8823
8824
8825
8826
8827
8828
8829
8830
8831
8832
8833
8834
8835
8836
8837
8838
8839
8840
8841
8842
8843
8844
8845
8846
8847
8848
8849
8850
8851
8852
8853
8854
8855
8856
8857
8858
8859
8860
8861
8862
8863
8864
8865
8866
8867
8868
8869
8870
8871
8872
8873
8874
8875
8876
8877
8878
8879
8880
8881
8882
8883
8884
8885
8886
8887
8888
8889
8890
8891
8892
8893
8894
8895
8896
8897
8898
8899
8900
8901
8902
8903
8904
8905
8906
8907
8908
8909
8910
8911
8912
8913
8914
8915
8916
8917
8918
8919
8920
8921
8922
8923
8924
8925
8926
8927
8928
8929
8930
8931
8932
8933
8934
8935
8936
8937
8938
8939
8940
8941
8942
8943
8944
8945
8946
8947
8948
8949
8950
8951
8952
8953
8954
8955
8956
8957
8958
8959
8960
8961
8962
8963
8964
8965
8966
8967
8968
8969
8970
8971
8972
8973
8974
8975
8976
8977
8978
8979
8980
8981
8982
8983
8984
8985
8986
8987
8988
8989
8990
8991
8992
8993
8994
8995
8996
8997
8998
8999
9000
9001
9002
9003
9004
9005
9006
9007
9008
9009
9010
9011
9012
9013
9014
9015
9016
9017
9018
9019
9020
9021
9022
9023
9024
9025
9026
9027
9028
9029
9030
9031
9032
9033
9034
9035
9036
9037
9038
9039
9040
9041
9042
9043
9044
9045
9046
9047
9048
9049
9050
9051
9052
9053
9054
9055
9056
9057
9058
9059
9060
9061
9062
9063
9064
9065
9066
9067
9068
9069
9070
9071
9072
9073
9074
9075
9076
9077
9078
9079
9080
9081
9082
9083
9084
9085
9086
9087
9088
9089
9090
9091
9092
9093
9094
9095
9096
9097
9098
9099
9100
9101
9102
9103
9104
9105
9106
9107
9108
9109
9110
9111
9112
9113
9114
9115
9116
9117
9118
9119
9120
9121
9122
9123
9124
9125
9126
9127
9128
9129
9130
9131
9132
9133
9134
9135
9136
9137
9138
9139
9140
9141
9142
9143
9144
9145
9146
9147
9148
9149
9150
9151
9152
9153
9154
9155
9156
9157
9158
9159
9160
9161
9162
9163
9164
9165
9166
9167
9168
9169
9170
9171
9172
9173
9174
9175
9176
9177
9178
9179
9180
9181
9182
9183
9184
9185
9186
9187
9188
9189
9190
9191
9192
9193
9194
9195
9196
9197
9198
9199
9200
9201
9202
9203
9204
9205
9206
9207
9208
9209
9210
9211
9212
9213
9214
9215
9216
9217
9218
9219
9220
9221
9222
9223
9224
9225
9226
9227
9228
9229
9230
9231
9232
9233
9234
9235
9236
9237
9238
9239
9240
9241
9242
9243
9244
9245
9246
9247
9248
9249
9250
9251
9252
9253
9254
9255
9256
9257
9258
9259
9260
9261
9262
9263
9264
9265
9266
9267
9268
9269
9270
9271
9272
9273
9274
9275
9276
9277
9278
9279
9280
9281
9282
9283
9284
9285
9286
9287
9288
9289
9290
9291
9292
9293
9294
9295
9296
9297
9298
9299
9300
9301
9302
9303
9304
9305
9306
9307
9308
9309
9310
9311
9312
9313
9314
9315
9316
9317
9318
9319
9320
9321
9322
9323
9324
9325
9326
9327
9328
9329
9330
9331
9332
9333
9334
9335
9336
9337
9338
9339
9340
9341
9342
9343
9344
9345
9346
9347
9348
9349
9350
9351
9352
9353
9354
9355
9356
9357
9358
9359
9360
9361
9362
9363
9364
9365
9366
9367
9368
9369
9370
9371
9372
9373
9374
9375
9376
9377
9378
9379
9380
9381
9382
9383
9384
9385
9386
9387
9388
9389
9390
9391
9392
9393
9394
9395
9396
9397
9398
9399
9400
9401
9402
9403
9404
9405
9406
9407
9408
9409
9410
9411
9412
9413
9414
9415
9416
9417
9418
9419
9420
9421
9422
9423
9424
9425
9426
9427
9428
9429
9430
9431
9432
9433
9434
9435
9436
9437
9438
9439
9440
9441
9442
9443
9444
9445
9446
9447
9448
9449
9450
9451
9452
9453
9454
9455
9456
9457
9458
9459
9460
9461
9462
9463
9464
9465
9466
9467
9468
9469
9470
9471
9472
9473
9474
9475
9476
9477
9478
9479
9480
9481
9482
9483
9484
9485
9486
9487
9488
9489
9490
9491
9492
9493
9494
9495
9496
9497
9498
9499
9500
9501
9502
9503
9504
9505
9506
9507
9508
9509
9510
9511
9512
9513
9514
9515
9516
9517
9518
9519
9520
9521
9522
9523
9524
9525
9526
9527
9528
9529
9530
9531
9532
9533
9534
9535
9536
9537
9538
9539
9540
9541
9542
9543
9544
9545
9546
9547
9548
9549
9550
9551
9552
9553
9554
9555
9556
9557
9558
9559
9560
9561
9562
9563
9564
9565
9566
9567
9568
9569
9570
9571
9572
9573
9574
9575
9576
9577
9578
9579
9580
9581
9582
9583
9584
9585
9586
9587
9588
9589
9590
9591
9592
9593
9594
9595
9596
9597
9598
9599
9600
9601
9602
9603
9604
9605
9606
9607
9608
9609
9610
9611
9612
9613
9614
9615
9616
9617
9618
9619
9620
9621
9622
9623
9624
9625
9626
9627
9628
9629
9630
9631
9632
9633
9634
9635
9636
9637
9638
9639
9640
9641
9642
9643
9644
9645
9646
9647
9648
9649
9650
9651
9652
9653
9654
9655
9656
9657
9658
9659
9660
9661
9662
9663
9664
9665
9666
9667
9668
9669
9670
9671
9672
9673
9674
9675
9676
9677
9678
9679
9680
9681
9682
9683
9684
9685
9686
9687
9688
9689
9690
9691
9692
9693
9694
9695
9696
9697
9698
9699
9700
9701
9702
9703
9704
9705
9706
9707
9708
9709
9710
9711
9712
9713
9714
9715
9716
9717
9718
9719
9720
9721
9722
9723
9724
9725
9726
9727
9728
9729
9730
9731
9732
9733
9734
9735
9736
9737
9738
9739
9740
9741
9742
9743
9744
9745
9746
9747
9748
9749
9750
9751
9752
9753
9754
9755
9756
9757
9758
9759
9760
9761
9762
9763
9764
9765
9766
9767
9768
9769
9770
9771
9772
9773
9774
9775
9776
9777
9778
9779
9780
9781
9782
9783
9784
9785
9786
9787
9788
9789
9790
9791
9792
9793
9794
9795
9796
9797
9798
9799
9800
9801
9802
9803
9804
9805
9806
9807
9808
9809
9810
9811
9812
9813
9814
9815
9816
9817
9818
9819
9820
9821
9822
9823
9824
9825
9826
9827
9828
9829
9830
9831
9832
9833
9834
9835
9836
9837
9838
9839
9840
9841
9842
9843
9844
9845
9846
9847
9848
9849
9850
9851
9852
9853
9854
9855
9856
9857
9858
9859
9860
9861
9862
9863
9864
9865
9866
9867
9868
9869
9870
9871
9872
9873
9874
9875
9876
9877
9878
9879
9880
9881
9882
9883
9884
9885
9886
9887
9888
9889
9890
9891
9892
9893
9894
9895
9896
9897
9898
9899
9900
9901
9902
9903
9904
9905
9906
9907
9908
9909
9910
9911
9912
9913
9914
9915
9916
9917
9918
9919
9920
9921
9922
9923
9924
9925
9926
9927
9928
9929
9930
9931
9932
9933
9934
9935
9936
9937
9938
9939
9940
9941
9942
9943
9944
9945
9946
9947
9948
9949
9950
9951
9952
9953
9954
9955
9956
9957
9958
9959
9960
9961
9962
9963
9964
9965
9966
9967
9968
9969
9970
9971
9972
9973
9974
9975
9976
9977
9978
9979
9980
9981
9982
9983
9984
9985
9986
9987
9988
9989
9990
9991
9992
9993
9994
9995
9996
9997
9998
9999
10000
10001
10002
10003
10004
10005
10006
10007
10008
10009
10010
10011
10012
10013
10014
10015
10016
10017
10018
10019
10020
10021
10022
10023
10024
10025
10026
10027
10028
10029
10030
10031
10032
10033
10034
10035
10036
10037
10038
10039
10040
10041
10042
10043
10044
10045
10046
10047
10048
10049
10050
10051
10052
10053
10054
10055
10056
10057
10058
10059
10060
10061
10062
10063
10064
10065
10066
10067
10068
10069
10070
10071
10072
10073
10074
10075
10076
10077
10078
10079
10080
10081
10082
10083
10084
10085
10086
10087
10088
10089
10090
10091
10092
10093
10094
10095
10096
10097
10098
10099
10100
10101
10102
10103
10104
10105
10106
10107
10108
10109
10110
10111
10112
10113
10114
10115
10116
10117
10118
10119
10120
10121
10122
10123
10124
10125
10126
10127
10128
10129
10130
10131
10132
10133
10134
10135
10136
10137
10138
10139
10140
10141
10142
10143
10144
10145
10146
10147
10148
10149
10150
10151
10152
10153
10154
10155
10156
10157
10158
10159
10160
10161
10162
10163
10164
10165
10166
10167
10168
10169
10170
10171
10172
10173
10174
10175
10176
10177
10178
10179
10180
10181
10182
10183
10184
10185
10186
10187
10188
10189
10190
10191
10192
10193
10194
10195
10196
10197
10198
10199
10200
10201
10202
10203
10204
10205
10206
10207
10208
10209
10210
10211
10212
10213
10214
10215
10216
10217
10218
10219
10220
10221
10222
10223
10224
10225
10226
10227
10228
10229
10230
10231
10232
10233
10234
10235
10236
10237
10238
10239
10240
10241
10242
10243
10244
10245
10246
10247
10248
10249
10250
10251
10252
10253
10254
10255
10256
10257
10258
10259
10260
10261
10262
10263
10264
10265
10266
10267
10268
10269
10270
10271
10272
10273
10274
10275
10276
10277
10278
10279
10280
10281
10282
10283
10284
10285
10286
10287
10288
10289
10290
10291
10292
10293
10294
10295
10296
10297
10298
10299
10300
10301
10302
10303
10304
10305
10306
10307
10308
10309
10310
10311
10312
10313
10314
10315
10316
10317
10318
10319
10320
10321
10322
10323
10324
10325
10326
10327
10328
10329
10330
10331
10332
10333
10334
10335
10336
10337
10338
10339
10340
10341
10342
10343
10344
10345
10346
10347
10348
10349
10350
10351
10352
10353
10354
10355
10356
10357
10358
10359
10360
10361
10362
10363
10364
10365
10366
10367
10368
10369
10370
10371
10372
10373
10374
10375
10376
10377
10378
10379
10380
10381
10382
10383
10384
10385
10386
10387
10388
10389
10390
10391
10392
10393
10394
10395
10396
10397
10398
10399
10400
10401
10402
10403
10404
10405
10406
10407
10408
10409
10410
10411
10412
10413
10414
10415
10416
10417
10418
10419
10420
10421
10422
10423
10424
10425
10426
10427
10428
10429
10430
10431
10432
10433
10434
10435
10436
10437
10438
10439
10440
10441
10442
10443
10444
10445
10446
10447
10448
10449
10450
10451
10452
10453
10454
10455
10456
10457
10458
10459
10460
10461
10462
10463
10464
10465
10466
10467
10468
10469
10470
10471
10472
10473
10474
10475
10476
10477
10478
10479
10480
10481
10482
10483
10484
10485
10486
10487
10488
10489
10490
10491
10492
10493
10494
10495
10496
10497
10498
10499
10500
10501
10502
10503
10504
10505
10506
10507
10508
10509
10510
10511
10512
10513
10514
10515
10516
10517
10518
10519
10520
10521
10522
10523
10524
10525
10526
10527
10528
10529
10530
10531
10532
10533
10534
10535
10536
10537
10538
10539
10540
10541
10542
10543
10544
10545
10546
10547
10548
10549
10550
10551
10552
10553
10554
10555
10556
10557
10558
10559
10560
10561
10562
10563
10564
10565
10566
10567
10568
10569
10570
10571
10572
10573
10574
10575
10576
10577
10578
10579
10580
10581
10582
10583
10584
10585
10586
10587
10588
10589
10590
10591
10592
10593
10594
10595
10596
10597
10598
10599
10600
10601
10602
10603
10604
10605
10606
10607
10608
10609
10610
10611
10612
10613
10614
10615
10616
10617
10618
10619
10620
10621
10622
10623
10624
10625
10626
10627
10628
10629
10630
10631
10632
10633
10634
10635
10636
10637
10638
10639
10640
10641
10642
10643
10644
10645
10646
10647
10648
10649
10650
10651
10652
10653
10654
10655
10656
10657
10658
10659
10660
10661
10662
10663
10664
10665
10666
10667
10668
10669
10670
10671
10672
10673
10674
10675
10676
10677
10678
10679
10680
10681
10682
10683
10684
10685
10686
10687
10688
10689
10690
10691
10692
10693
10694
10695
10696
10697
10698
10699
10700
10701
10702
10703
10704
10705
10706
10707
10708
10709
10710
10711
10712
10713
10714
10715
10716
10717
10718
10719
10720
10721
10722
10723
10724
10725
10726
10727
10728
10729
10730
10731
10732
10733
10734
10735
10736
10737
10738
10739
10740
10741
10742
10743
10744
10745
10746
10747
10748
10749
10750
10751
10752
10753
10754
10755
10756
10757
10758
10759
10760
10761
10762
10763
10764
10765
10766
10767
10768
10769
10770
10771
10772
10773
10774
10775
10776
10777
10778
10779
10780
10781
10782
10783
10784
10785
10786
10787
10788
10789
10790
10791
10792
10793
10794
10795
10796
10797
10798
10799
10800
10801
10802
10803
10804
10805
10806
10807
10808
10809
10810
10811
10812
10813
10814
10815
10816
10817
10818
10819
10820
10821
10822
10823
10824
10825
10826
10827
10828
10829
10830
10831
10832
10833
10834
10835
10836
10837
10838
10839
10840
10841
10842
10843
10844
10845
10846
10847
10848
10849
10850
10851
10852
10853
10854
10855
10856
10857
10858
10859
10860
10861
10862
10863
10864
10865
10866
10867
10868
10869
10870
10871
10872
10873
10874
/*-
 *   BSD LICENSE
 *
 *   Copyright(c) 2001-2017 Broadcom Limited.
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or without
 *   modification, are permitted provided that the following conditions
 *   are met:
 *
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in
 *       the documentation and/or other materials provided with the
 *       distribution.
 *     * Neither the name of Broadcom Corporation nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _HSI_STRUCT_DEF_DPDK_
#define _HSI_STRUCT_DEF_DPDK_
/* HSI and HWRM Specification 1.7.7 */
#define HWRM_VERSION_MAJOR	1
#define HWRM_VERSION_MINOR	7
#define HWRM_VERSION_UPDATE	7

#define HWRM_VERSION_STR	"1.7.7"
/*
 * Following is the signature for HWRM message field that indicates not
 * applicable	(All F's). Need to cast it the size of the field if needed.
 */
#define HWRM_NA_SIGNATURE	((uint32_t)(-1))
#define HWRM_MAX_REQ_LEN	(128)  /* hwrm_func_buf_rgtr */
#define HWRM_MAX_RESP_LEN	(248)  /* hwrm_selftest_qlist */
#define HW_HASH_INDEX_SIZE	 0x80	/* 7 bit indirection table index. */
#define HW_HASH_KEY_SIZE	40
#define HWRM_RESP_VALID_KEY	1 /* valid key for HWRM response */
#define HWRM_ROCE_SP_HSI_VERSION_MAJOR	1
#define HWRM_ROCE_SP_HSI_VERSION_MINOR	7
#define HWRM_ROCE_SP_HSI_VERSION_UPDATE	4

/*
 * Request types
 */
#define HWRM_VER_GET			(UINT32_C(0x0))
#define HWRM_FUNC_BUF_UNRGTR		(UINT32_C(0xe))
#define HWRM_FUNC_VF_CFG		(UINT32_C(0xf))
    /* Reserved for future use */
#define RESERVED1			(UINT32_C(0x10))
#define HWRM_FUNC_RESET			(UINT32_C(0x11))
#define HWRM_FUNC_GETFID		(UINT32_C(0x12))
#define HWRM_FUNC_VF_ALLOC		(UINT32_C(0x13))
#define HWRM_FUNC_VF_FREE		(UINT32_C(0x14))
#define HWRM_FUNC_QCAPS			(UINT32_C(0x15))
#define HWRM_FUNC_QCFG			(UINT32_C(0x16))
#define HWRM_FUNC_CFG			(UINT32_C(0x17))
#define HWRM_FUNC_QSTATS		(UINT32_C(0x18))
#define HWRM_FUNC_CLR_STATS		(UINT32_C(0x19))
#define HWRM_FUNC_DRV_UNRGTR		(UINT32_C(0x1a))
#define HWRM_FUNC_VF_RESC_FREE		(UINT32_C(0x1b))
#define HWRM_FUNC_VF_VNIC_IDS_QUERY	(UINT32_C(0x1c))
#define HWRM_FUNC_DRV_RGTR		(UINT32_C(0x1d))
#define HWRM_FUNC_DRV_QVER		(UINT32_C(0x1e))
#define HWRM_FUNC_BUF_RGTR		(UINT32_C(0x1f))
#define HWRM_PORT_PHY_CFG		(UINT32_C(0x20))
#define HWRM_PORT_MAC_CFG		(UINT32_C(0x21))
#define HWRM_PORT_QSTATS		(UINT32_C(0x23))
#define HWRM_PORT_LPBK_QSTATS		(UINT32_C(0x24))
#define HWRM_PORT_CLR_STATS		(UINT32_C(0x25))
#define HWRM_PORT_PHY_QCFG		(UINT32_C(0x27))
#define HWRM_PORT_MAC_QCFG		(UINT32_C(0x28))
#define HWRM_PORT_PHY_QCAPS		(UINT32_C(0x2a))
#define HWRM_PORT_LED_CFG		(UINT32_C(0x2d))
#define HWRM_PORT_LED_QCFG		(UINT32_C(0x2e))
#define HWRM_PORT_LED_QCAPS		(UINT32_C(0x2f))
#define HWRM_QUEUE_QPORTCFG		(UINT32_C(0x30))
#define HWRM_QUEUE_QCFG			(UINT32_C(0x31))
#define HWRM_QUEUE_CFG			(UINT32_C(0x32))
#define HWRM_FUNC_VLAN_CFG		(UINT32_C(0x33))
#define HWRM_FUNC_VLAN_QCFG		(UINT32_C(0x34))
#define HWRM_QUEUE_PFCENABLE_QCFG	(UINT32_C(0x35))
#define HWRM_QUEUE_PFCENABLE_CFG	(UINT32_C(0x36))
#define HWRM_QUEUE_PRI2COS_QCFG		(UINT32_C(0x37))
#define HWRM_QUEUE_PRI2COS_CFG		(UINT32_C(0x38))
#define HWRM_QUEUE_COS2BW_QCFG		(UINT32_C(0x39))
#define HWRM_QUEUE_COS2BW_CFG		(UINT32_C(0x3a))
#define HWRM_VNIC_ALLOC			(UINT32_C(0x40))
#define HWRM_VNIC_ALLOC			(UINT32_C(0x40))
#define HWRM_VNIC_FREE			(UINT32_C(0x41))
#define HWRM_VNIC_CFG			(UINT32_C(0x42))
#define HWRM_VNIC_QCFG			(UINT32_C(0x43))
#define HWRM_VNIC_TPA_CFG		(UINT32_C(0x44))
#define HWRM_VNIC_RSS_CFG		(UINT32_C(0x46))
#define HWRM_VNIC_RSS_QCFG		(UINT32_C(0x47))
#define HWRM_VNIC_PLCMODES_CFG		(UINT32_C(0x48))
#define HWRM_VNIC_PLCMODES_QCFG		(UINT32_C(0x49))
#define HWRM_VNIC_QCAPS			(UINT32_C(0x4a))
#define HWRM_RING_ALLOC			(UINT32_C(0x50))
#define HWRM_RING_FREE			(UINT32_C(0x51))
#define HWRM_RING_CMPL_RING_QAGGINT_PARAMS	(UINT32_C(0x52))
#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS	(UINT32_C(0x53))
#define HWRM_RING_RESET			(UINT32_C(0x5e))
#define HWRM_RING_GRP_ALLOC		(UINT32_C(0x60))
#define HWRM_RING_GRP_FREE		(UINT32_C(0x61))
#define HWRM_VNIC_RSS_COS_LB_CTX_ALLOC	(UINT32_C(0x70))
#define HWRM_VNIC_RSS_COS_LB_CTX_FREE	(UINT32_C(0x71))
#define HWRM_CFA_L2_FILTER_ALLOC	(UINT32_C(0x90))
#define HWRM_CFA_L2_FILTER_FREE		(UINT32_C(0x91))
#define HWRM_CFA_L2_FILTER_CFG		(UINT32_C(0x92))
#define HWRM_CFA_L2_SET_RX_MASK		(UINT32_C(0x93))
    /* Reserved for future use */
#define HWRM_CFA_VLAN_ANTISPOOF_CFG	(UINT32_C(0x94))
#define HWRM_CFA_TUNNEL_FILTER_ALLOC	(UINT32_C(0x95))
#define HWRM_CFA_TUNNEL_FILTER_FREE	(UINT32_C(0x96))
#define HWRM_CFA_NTUPLE_FILTER_ALLOC	(UINT32_C(0x99))
#define HWRM_CFA_NTUPLE_FILTER_FREE	(UINT32_C(0x9a))
#define HWRM_CFA_NTUPLE_FILTER_CFG	(UINT32_C(0x9b))
#define HWRM_TUNNEL_DST_PORT_QUERY	(UINT32_C(0xa0))
#define HWRM_TUNNEL_DST_PORT_ALLOC	(UINT32_C(0xa1))
#define HWRM_TUNNEL_DST_PORT_FREE	(UINT32_C(0xa2))
#define HWRM_STAT_CTX_ALLOC		(UINT32_C(0xb0))
#define HWRM_STAT_CTX_FREE		(UINT32_C(0xb1))
#define HWRM_STAT_CTX_QUERY		(UINT32_C(0xb2))
#define HWRM_STAT_CTX_CLR_STATS		(UINT32_C(0xb3))
#define HWRM_FW_RESET			(UINT32_C(0xc0))
#define HWRM_FW_QSTATUS			(UINT32_C(0xc1))
#define HWRM_EXEC_FWD_RESP		(UINT32_C(0xd0))
#define HWRM_REJECT_FWD_RESP		(UINT32_C(0xd1))
#define HWRM_FWD_RESP			(UINT32_C(0xd2))
#define HWRM_FWD_ASYNC_EVENT_CMPL	(UINT32_C(0xd3))
#define HWRM_TEMP_MONITOR_QUERY		(UINT32_C(0xe0))
#define HWRM_WOL_FILTER_ALLOC		(UINT32_C(0xf0))
#define HWRM_WOL_FILTER_FREE		(UINT32_C(0xf1))
#define HWRM_WOL_FILTER_QCFG		(UINT32_C(0xf2))
#define HWRM_WOL_REASON_QCFG		(UINT32_C(0xf3))
#define HWRM_DBG_DUMP			(UINT32_C(0xff14))
#define HWRM_NVM_VALIDATE_OPTION	(UINT32_C(0xffef))
#define HWRM_NVM_FLUSH			(UINT32_C(0xfff0))
#define HWRM_NVM_GET_VARIABLE		(UINT32_C(0xfff1))
#define HWRM_NVM_SET_VARIABLE		(UINT32_C(0xfff2))
#define HWRM_NVM_INSTALL_UPDATE		(UINT32_C(0xfff3))
#define HWRM_NVM_MODIFY			(UINT32_C(0xfff4))
#define HWRM_NVM_VERIFY_UPDATE		(UINT32_C(0xfff5))
#define HWRM_NVM_GET_DEV_INFO		(UINT32_C(0xfff6))
#define HWRM_NVM_ERASE_DIR_ENTRY	(UINT32_C(0xfff7))
#define HWRM_NVM_MOD_DIR_ENTRY		(UINT32_C(0xfff8))
#define HWRM_NVM_FIND_DIR_ENTRY		(UINT32_C(0xfff9))
#define HWRM_NVM_GET_DIR_ENTRIES	(UINT32_C(0xfffa))
#define HWRM_NVM_GET_DIR_INFO		(UINT32_C(0xfffb))
#define HWRM_NVM_RAW_DUMP		(UINT32_C(0xfffc))
#define HWRM_NVM_READ			(UINT32_C(0xfffd))
#define HWRM_NVM_WRITE			(UINT32_C(0xfffe))
#define HWRM_NVM_RAW_WRITE_BLK		(UINT32_C(0xffff))

/*
 * Note: The Host Software Interface (HSI) and Hardware Resource Manager (HWRM)
 * specification describes the data structures used in Ethernet packet or RDMA
 * message data transfers as well as an abstract interface for managing Ethernet
 * NIC hardware resources.
 */
/* Ethernet Data path Host Structures */
/*
 * Description: The following three sections document the host structures used
 * between device and software drivers for communicating Ethernet packets.
 */
/* BD Ring Structures */
/*
 * Description: This structure is used to inform the NIC of a location for and
 * an aggregation buffer that will be used for packet data that is received. An
 * aggregation buffer creates a different kind of completion operation for a
 * packet where a variable number of BDs may be used to place the packet in the
 * host. RX Rings that have aggregation buffers are known as aggregation rings
 * and must contain only aggregation buffers.
 */
/* Short TX BD	(16 bytes) */
struct tx_bd_short {
	uint16_t flags_type;
	/*
	 * All bits in this field must be valid on the first BD of a
	 * packet. Only the packet_end bit must be valid for the
	 * remaining BDs of a packet.
	 */
	/* This value identifies the type of buffer descriptor. */
	#define TX_BD_SHORT_TYPE_MASK	UINT32_C(0x3f)
	#define TX_BD_SHORT_TYPE_SFT	0
	/*
	 * Indicates that this BD is 16B long and is
	 * used for normal L2 packet transmission.
	 */
	#define TX_BD_SHORT_TYPE_TX_BD_SHORT	UINT32_C(0x0)
	/*
	 * If set to 1, the packet ends with the data in the buffer
	 * pointed to by this descriptor. This flag must be valid on
	 * every BD.
	 */
	#define TX_BD_SHORT_FLAGS_PACKET_END	UINT32_C(0x40)
	/*
	 * If set to 1, the device will not generate a completion for
	 * this transmit packet unless there is an error in it's
	 * processing. If this bit is set to 0, then the packet will be
	 * completed normally. This bit must be valid only on the first
	 * BD of a packet.
	 */
	#define TX_BD_SHORT_FLAGS_NO_CMPL	UINT32_C(0x80)
	/*
	 * This value indicates how many 16B BD locations are consumed
	 * in the ring by this packet. A value of 1 indicates that this
	 * BD is the only BD	(and that the it is a short BD). A value of
	 * 3 indicates either 3 short BDs or 1 long BD and one short BD
	 * in the packet. A value of 0 indicates that there are 32 BD
	 * locations in the packet	(the maximum). This field is valid
	 * only on the first BD of a packet.
	 */
	#define TX_BD_SHORT_FLAGS_BD_CNT_MASK	UINT32_C(0x1f00)
	#define TX_BD_SHORT_FLAGS_BD_CNT_SFT	8
	/*
	 * This value is a hint for the length of the entire packet. It
	 * is used by the chip to optimize internal processing. The
	 * packet will be dropped if the hint is too short. This field
	 * is valid only on the first BD of a packet.
	 */
	#define TX_BD_SHORT_FLAGS_LHINT_MASK	UINT32_C(0x6000)
	#define TX_BD_SHORT_FLAGS_LHINT_SFT	13
	/* indicates packet length < 512B */
	#define TX_BD_SHORT_FLAGS_LHINT_LT512	(UINT32_C(0x0) << 13)
	/* indicates 512 <= packet length < 1KB */
	#define TX_BD_SHORT_FLAGS_LHINT_LT1K	(UINT32_C(0x1) << 13)
	/* indicates 1KB <= packet length < 2KB */
	#define TX_BD_SHORT_FLAGS_LHINT_LT2K	(UINT32_C(0x2) << 13)
	/* indicates packet length >= 2KB */
	#define TX_BD_SHORT_FLAGS_LHINT_GTE2K	(UINT32_C(0x3) << 13)
	#define TX_BD_SHORT_FLAGS_LHINT_LAST \
		TX_BD_SHORT_FLAGS_LHINT_GTE2K
	/*
	 * If set to 1, the device immediately updates the Send Consumer
	 * Index after the buffer associated with this descriptor has
	 * been transferred via DMA to NIC memory from host memory. An
	 * interrupt may or may not be generated according to the state
	 * of the interrupt avoidance mechanisms. If this bit is set to
	 * 0, then the Consumer Index is only updated as soon as one of
	 * the host interrupt coalescing conditions has been met. This
	 * bit must be valid on the first BD of a packet.
	 */
	#define TX_BD_SHORT_FLAGS_COAL_NOW	UINT32_C(0x8000)
	/*
	 * All bits in this field must be valid on the first BD of a
	 * packet. Only the packet_end bit must be valid for the
	 * remaining BDs of a packet.
	 */
	#define TX_BD_SHORT_FLAGS_MASK	UINT32_C(0xffc0)
	#define TX_BD_SHORT_FLAGS_SFT	6
	uint16_t len;
	/*
	 * This is the length of the host physical buffer this BD
	 * describes in bytes. This field must be valid on all BDs of a
	 * packet.
	 */
	uint32_t opaque;
	/*
	 * The opaque data field is pass through to the completion and
	 * can be used for any data that the driver wants to associate
	 * with the transmit BD. This field must be valid on the first
	 * BD of a packet.
	 */
	uint64_t addr;
	/*
	 * This is the host physical address for the portion of the
	 * packet described by this TX BD. This value must be valid on
	 * all BDs of a packet.
	 */
} __attribute__((packed));

/* Long TX BD	(32 bytes split to 2 16-byte struct) */
struct tx_bd_long {
	uint16_t flags_type;
	/*
	 * All bits in this field must be valid on the first BD of a
	 * packet. Only the packet_end bit must be valid for the
	 * remaining BDs of a packet.
	 */
	/* This value identifies the type of buffer descriptor. */
	#define TX_BD_LONG_TYPE_MASK	UINT32_C(0x3f)
	#define TX_BD_LONG_TYPE_SFT	0
	/*
	 * Indicates that this BD is 32B long and is
	 * used for normal L2 packet transmission.
	 */
	#define TX_BD_LONG_TYPE_TX_BD_LONG	UINT32_C(0x10)
	/*
	 * If set to 1, the packet ends with the data in the buffer
	 * pointed to by this descriptor. This flag must be valid on
	 * every BD.
	 */
	#define TX_BD_LONG_FLAGS_PACKET_END	UINT32_C(0x40)
	/*
	 * If set to 1, the device will not generate a completion for
	 * this transmit packet unless there is an error in it's
	 * processing. If this bit is set to 0, then the packet will be
	 * completed normally. This bit must be valid only on the first
	 * BD of a packet.
	 */
	#define TX_BD_LONG_FLAGS_NO_CMPL	UINT32_C(0x80)
	/*
	 * This value indicates how many 16B BD locations are consumed
	 * in the ring by this packet. A value of 1 indicates that this
	 * BD is the only BD	(and that the it is a short BD). A value of
	 * 3 indicates either 3 short BDs or 1 long BD and one short BD
	 * in the packet. A value of 0 indicates that there are 32 BD
	 * locations in the packet	(the maximum). This field is valid
	 * only on the first BD of a packet.
	 */
	#define TX_BD_LONG_FLAGS_BD_CNT_MASK	UINT32_C(0x1f00)
	#define TX_BD_LONG_FLAGS_BD_CNT_SFT	8
	/*
	 * This value is a hint for the length of the entire packet. It
	 * is used by the chip to optimize internal processing. The
	 * packet will be dropped if the hint is too short. This field
	 * is valid only on the first BD of a packet.
	 */
	#define TX_BD_LONG_FLAGS_LHINT_MASK	UINT32_C(0x6000)
	#define TX_BD_LONG_FLAGS_LHINT_SFT	13
	/* indicates packet length < 512B */
	#define TX_BD_LONG_FLAGS_LHINT_LT512	(UINT32_C(0x0) << 13)
	/* indicates 512 <= packet length < 1KB */
	#define TX_BD_LONG_FLAGS_LHINT_LT1K	(UINT32_C(0x1) << 13)
	/* indicates 1KB <= packet length < 2KB */
	#define TX_BD_LONG_FLAGS_LHINT_LT2K	(UINT32_C(0x2) << 13)
	/* indicates packet length >= 2KB */
	#define TX_BD_LONG_FLAGS_LHINT_GTE2K	(UINT32_C(0x3) << 13)
	#define TX_BD_LONG_FLAGS_LHINT_LAST \
		TX_BD_LONG_FLAGS_LHINT_GTE2K
	/*
	 * If set to 1, the device immediately updates the Send Consumer
	 * Index after the buffer associated with this descriptor has
	 * been transferred via DMA to NIC memory from host memory. An
	 * interrupt may or may not be generated according to the state
	 * of the interrupt avoidance mechanisms. If this bit is set to
	 * 0, then the Consumer Index is only updated as soon as one of
	 * the host interrupt coalescing conditions has been met. This
	 * bit must be valid on the first BD of a packet.
	 */
	#define TX_BD_LONG_FLAGS_COAL_NOW	UINT32_C(0x8000)
	/*
	 * All bits in this field must be valid on the first BD of a
	 * packet. Only the packet_end bit must be valid for the
	 * remaining BDs of a packet.
	 */
	#define TX_BD_LONG_FLAGS_MASK	UINT32_C(0xffc0)
	#define TX_BD_LONG_FLAGS_SFT	6
	uint16_t len;
	/*
	 * This is the length of the host physical buffer this BD
	 * describes in bytes. This field must be valid on all BDs of a
	 * packet.
	 */
	uint32_t opaque;
	/*
	 * The opaque data field is pass through to the completion and
	 * can be used for any data that the driver wants to associate
	 * with the transmit BD. This field must be valid on the first
	 * BD of a packet.
	 */
	uint64_t addr;
	/*
	 * This is the host physical address for the portion of the
	 * packet described by this TX BD. This value must be valid on
	 * all BDs of a packet.
	 */
} __attribute__((packed));

/* last 16 bytes of Long TX BD */
struct tx_bd_long_hi {
	uint16_t lflags;
	/*
	 * All bits in this field must be valid on the first BD of a
	 * packet. Their value on other BDs of the packet will be
	 * ignored.
	 */
	/*
	 * If set to 1, the controller replaces the TCP/UPD checksum
	 * fields of normal TCP/UPD checksum, or the inner TCP/UDP
	 * checksum field of the encapsulated TCP/UDP packets with the
	 * hardware calculated TCP/UDP checksum for the packet
	 * associated with this descriptor. The flag is ignored if the
	 * LSO flag is set. This bit must be valid on the first BD of a
	 * packet.
	 */
	#define TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM	UINT32_C(0x1)
	/*
	 * If set to 1, the controller replaces the IP checksum of the
	 * normal packets, or the inner IP checksum of the encapsulated
	 * packets with the hardware calculated IP checksum for the
	 * packet associated with this descriptor. This bit must be
	 * valid on the first BD of a packet.
	 */
	#define TX_BD_LONG_LFLAGS_IP_CHKSUM	UINT32_C(0x2)
	/*
	 * If set to 1, the controller will not append an Ethernet CRC
	 * to the end of the frame. This bit must be valid on the first
	 * BD of a packet. Packet must be 64B or longer when this flag
	 * is set. It is not useful to use this bit with any form of TX
	 * offload such as CSO or LSO. The intent is that the packet
	 * from the host already has a valid Ethernet CRC on the packet.
	 */
	#define TX_BD_LONG_LFLAGS_NOCRC	UINT32_C(0x4)
	/*
	 * If set to 1, the device will record the time at which the
	 * packet was actually transmitted at the TX MAC. This bit must
	 * be valid on the first BD of a packet.
	 */
	#define TX_BD_LONG_LFLAGS_STAMP	UINT32_C(0x8)
	/*
	 * If set to 1, The controller replaces the tunnel IP checksum
	 * field with hardware calculated IP checksum for the IP header
	 * of the packet associated with this descriptor. For outer UDP
	 * checksum, global outer UDP checksum TE_NIC register needs to
	 * be enabled. If the global outer UDP checksum TE_NIC register
	 * bit is set, outer UDP checksum will be calculated for the
	 * following cases: 1. Packets with tcp_udp_chksum flag set to
	 * offload checksum for inner packet AND the inner packet is
	 * TCP/UDP. If the inner packet is ICMP for example	(non-
	 * TCP/UDP), even if the tcp_udp_chksum is set, the outer UDP
	 * checksum will not be calculated. 2. Packets with lso flag set
	 * which implies inner TCP checksum calculation as part of LSO
	 * operation.
	 */
	#define TX_BD_LONG_LFLAGS_T_IP_CHKSUM	UINT32_C(0x10)
	/*
	 * If set to 1, the device will treat this packet with LSO(Large
	 * Send Offload) processing for both normal or encapsulated
	 * packets, which is a form of TCP segmentation. When this bit
	 * is 1, the hdr_size and mss fields must be valid. The driver
	 * doesn't need to set t_ip_chksum, ip_chksum, and
	 * tcp_udp_chksum flags since the controller will replace the
	 * appropriate checksum fields for segmented packets. When this
	 * bit is 1, the hdr_size and mss fields must be valid.
	 */
	#define TX_BD_LONG_LFLAGS_LSO	UINT32_C(0x20)
	/*
	 * If set to zero when LSO is '1', then the IPID will be treated
	 * as a 16b number and will be wrapped if it exceeds a value of
	 * 0xffff. If set to one when LSO is '1', then the IPID will be
	 * treated as a 15b number and will be wrapped if it exceeds a
	 * value 0f 0x7fff.
	 */
	#define TX_BD_LONG_LFLAGS_IPID_FMT	UINT32_C(0x40)
	/*
	 * If set to zero when LSO is '1', then the IPID of the tunnel
	 * IP header will not be modified during LSO operations. If set
	 * to one when LSO is '1', then the IPID of the tunnel IP header
	 * will be incremented for each subsequent segment of an LSO
	 * operation. The flag is ignored if the LSO packet is a normal
	 *	(non-tunneled) TCP packet.
	 */
	#define TX_BD_LONG_LFLAGS_T_IPID	UINT32_C(0x80)
	/*
	 * If set to '1', then the RoCE ICRC will be appended to the
	 * packet. Packet must be a valid RoCE format packet.
	 */
	#define TX_BD_LONG_LFLAGS_ROCE_CRC	UINT32_C(0x100)
	/*
	 * If set to '1', then the FCoE CRC will be appended to the
	 * packet. Packet must be a valid FCoE format packet.
	 */
	#define TX_BD_LONG_LFLAGS_FCOE_CRC	UINT32_C(0x200)
	uint16_t hdr_size;
	/*
	 * When LSO is '1', this field must contain the offset of the
	 * TCP payload from the beginning of the packet in as 16b words.
	 * In case of encapsulated/tunneling packet, this field contains
	 * the offset of the inner TCP payload from beginning of the
	 * packet as 16-bit words. This value must be valid on the first
	 * BD of a packet.
	 */
	#define TX_BD_LONG_HDR_SIZE_MASK	UINT32_C(0x1ff)
	#define TX_BD_LONG_HDR_SIZE_SFT	0
	uint32_t mss;
	/*
	 * This is the MSS value that will be used to do the LSO
	 * processing. The value is the length in bytes of the TCP
	 * payload for each segment generated by the LSO operation. This
	 * value must be valid on the first BD of a packet.
	 */
	#define TX_BD_LONG_MSS_MASK	UINT32_C(0x7fff)
	#define TX_BD_LONG_MSS_SFT	0
	uint16_t unused_2;
	uint16_t cfa_action;
	/*
	 * This value selects a CFA action to perform on the packet. Set
	 * this value to zero if no CFA action is desired. This value
	 * must be valid on the first BD of a packet.
	 */
	uint32_t cfa_meta;
	/*
	 * This value is action meta-data that defines CFA edit
	 * operations that are done in addition to any action editing.
	 */
	/* When key=1, This is the VLAN tag VID value. */
	#define TX_BD_LONG_CFA_META_VLAN_VID_MASK	UINT32_C(0xfff)
	#define TX_BD_LONG_CFA_META_VLAN_VID_SFT	0
	/* When key=1, This is the VLAN tag DE value. */
	#define TX_BD_LONG_CFA_META_VLAN_DE	UINT32_C(0x1000)
	/* When key=1, This is the VLAN tag PRI value. */
	#define TX_BD_LONG_CFA_META_VLAN_PRI_MASK	UINT32_C(0xe000)
	#define TX_BD_LONG_CFA_META_VLAN_PRI_SFT	13
	/* When key=1, This is the VLAN tag TPID select value. */
	#define TX_BD_LONG_CFA_META_VLAN_TPID_MASK	UINT32_C(0x70000)
	#define TX_BD_LONG_CFA_META_VLAN_TPID_SFT	16
	/* 0x88a8 */
	#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID88A8	(UINT32_C(0x0) << 16)
	/* 0x8100 */
	#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID8100	(UINT32_C(0x1) << 16)
	/* 0x9100 */
	#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9100	(UINT32_C(0x2) << 16)
	/* 0x9200 */
	#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9200	(UINT32_C(0x3) << 16)
	/* 0x9300 */
	#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9300	(UINT32_C(0x4) << 16)
	/* Value programmed in CFA VLANTPID register. */
	#define TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG	(UINT32_C(0x5) << 16)
	#define TX_BD_LONG_CFA_META_VLAN_TPID_LAST \
		TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG
	/* When key=1, This is the VLAN tag TPID select value. */
	#define TX_BD_LONG_CFA_META_VLAN_RESERVED_MASK	UINT32_C(0xff80000)
	#define TX_BD_LONG_CFA_META_VLAN_RESERVED_SFT	19
	/*
	 * This field identifies the type of edit to be performed on the
	 * packet. This value must be valid on the first BD of a packet.
	 */
	#define TX_BD_LONG_CFA_META_KEY_MASK	UINT32_C(0xf0000000)
	#define TX_BD_LONG_CFA_META_KEY_SFT	28
	/* No editing */
	#define TX_BD_LONG_CFA_META_KEY_NONE	(UINT32_C(0x0) << 28)
	/*
	 * - meta[17:16] - TPID select value	(0 =
	 * 0x8100). - meta[15:12] - PRI/DE value. -
	 * meta[11:0] - VID value.
	 */
	#define TX_BD_LONG_CFA_META_KEY_VLAN_TAG	(UINT32_C(0x1) << 28)
	#define TX_BD_LONG_CFA_META_KEY_LAST \
		TX_BD_LONG_CFA_META_KEY_VLAN_TAG
} __attribute__((packed));

/* RX Producer Packet BD	(16 bytes) */
struct rx_prod_pkt_bd {
	uint16_t flags_type;
	/* This value identifies the type of buffer descriptor. */
	#define RX_PROD_PKT_BD_TYPE_MASK	UINT32_C(0x3f)
	#define RX_PROD_PKT_BD_TYPE_SFT	0
	/*
	 * Indicates that this BD is 16B long and is an
	 * RX Producer	(ie. empty) buffer descriptor.
	 */
	#define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT	UINT32_C(0x4)
	/*
	 * If set to 1, the packet will be placed at the address plus
	 * 2B. The 2 Bytes of padding will be written as zero.
	 */
	/*
	 * This is intended to be used when the host buffer is cache-
	 * line aligned to produce packets that are easy to parse in
	 * host memory while still allowing writes to be cache line
	 * aligned.
	 */
	#define RX_PROD_PKT_BD_FLAGS_SOP_PAD	UINT32_C(0x40)
	/*
	 * If set to 1, the packet write will be padded out to the
	 * nearest cache-line with zero value padding.
	 */
	/*
	 * If receive buffers start/end on cache-line boundaries, this
	 * feature will ensure that all data writes on the PCI bus
	 * start/end on cache line boundaries.
	 */
	#define RX_PROD_PKT_BD_FLAGS_EOP_PAD	UINT32_C(0x80)
	/*
	 * This value is the number of additional buffers in the ring
	 * that describe the buffer space to be consumed for the this
	 * packet. If the value is zero, then the packet must fit within
	 * the space described by this BD. If this value is 1 or more,
	 * it indicates how many additional "buffer" BDs are in the ring
	 * immediately following this BD to be used for the same network
	 * packet. Even if the packet to be placed does not need all the
	 * additional buffers, they will be consumed anyway.
	 */
	#define RX_PROD_PKT_BD_FLAGS_BUFFERS_MASK	UINT32_C(0x300)
	#define RX_PROD_PKT_BD_FLAGS_BUFFERS_SFT	8
	#define RX_PROD_PKT_BD_FLAGS_MASK	UINT32_C(0xffc0)
	#define RX_PROD_PKT_BD_FLAGS_SFT	6
	uint16_t len;
	/*
	 * This is the length in Bytes of the host physical buffer where
	 * data for the packet may be placed in host memory.
	 */
	/*
	 * While this is a Byte resolution value, it is often
	 * advantageous to ensure that the buffers provided end on a
	 * host cache line.
	 */
	uint32_t opaque;
	/*
	 * The opaque data field is pass through to the completion and
	 * can be used for any data that the driver wants to associate
	 * with this receive buffer set.
	 */
	uint64_t addr;
	/*
	 * This is the host physical address where data for the packet
	 * may by placed in host memory.
	 */
	/*
	 * While this is a Byte resolution value, it is often
	 * advantageous to ensure that the buffers provide start on a
	 * host cache line.
	 */
} __attribute__((packed));

/* Completion Ring Structures */
/* Note: This structure is used by the HWRM to communicate HWRM Error. */
/* Base Completion Record	(16 bytes) */
struct cmpl_base {
	uint16_t type;
	/* unused is 10 b */
	/*
	 * This field indicates the exact type of the completion. By
	 * convention, the LSB identifies the length of the record in
	 * 16B units. Even values indicate 16B records. Odd values
	 * indicate 32B records.
	 */
	#define CMPL_BASE_TYPE_MASK	UINT32_C(0x3f)
	#define CMPL_BASE_TYPE_SFT	0
	/* TX L2 completion: Completion of TX packet. Length = 16B */
	#define CMPL_BASE_TYPE_TX_L2	UINT32_C(0x0)
	/*
	 * RX L2 completion: Completion of and L2 RX
	 * packet. Length = 32B
	 */
	#define CMPL_BASE_TYPE_RX_L2	UINT32_C(0x11)
	/*
	 * RX Aggregation Buffer completion : Completion
	 * of an L2 aggregation buffer in support of
	 * TPA, HDS, or Jumbo packet completion. Length
	 * = 16B
	 */
	#define CMPL_BASE_TYPE_RX_AGG	UINT32_C(0x12)
	/*
	 * RX L2 TPA Start Completion: Completion at the
	 * beginning of a TPA operation. Length = 32B
	 */
	#define CMPL_BASE_TYPE_RX_TPA_START	UINT32_C(0x13)
	/*
	 * RX L2 TPA End Completion: Completion at the
	 * end of a TPA operation. Length = 32B
	 */
	#define CMPL_BASE_TYPE_RX_TPA_END	UINT32_C(0x15)
	/*
	 * Statistics Ejection Completion: Completion of
	 * statistics data ejection buffer. Length = 16B
	 */
	#define CMPL_BASE_TYPE_STAT_EJECT	UINT32_C(0x1a)
	/* HWRM Command Completion: Completion of an HWRM command. */
	#define CMPL_BASE_TYPE_HWRM_DONE	UINT32_C(0x20)
	/* Forwarded HWRM Request */
	#define CMPL_BASE_TYPE_HWRM_FWD_REQ	UINT32_C(0x22)
	/* Forwarded HWRM Response */
	#define CMPL_BASE_TYPE_HWRM_FWD_RESP	UINT32_C(0x24)
	/* HWRM Asynchronous Event Information */
	#define CMPL_BASE_TYPE_HWRM_ASYNC_EVENT	UINT32_C(0x2e)
	/* CQ Notification */
	#define CMPL_BASE_TYPE_CQ_NOTIFICATION	UINT32_C(0x30)
	/* SRQ Threshold Event */
	#define CMPL_BASE_TYPE_SRQ_EVENT	UINT32_C(0x32)
	/* DBQ Threshold Event */
	#define CMPL_BASE_TYPE_DBQ_EVENT	UINT32_C(0x34)
	/* QP Async Notification */
	#define CMPL_BASE_TYPE_QP_EVENT	UINT32_C(0x38)
	/* Function Async Notification */
	#define CMPL_BASE_TYPE_FUNC_EVENT	UINT32_C(0x3a)
	/* unused is 10 b */
	uint16_t info1;
	/* info1 is 16 b */
	uint32_t info2;
	/* info2 is 32 b */
	uint32_t info3_v;
	/* info3 is 31 b */
	/*
	 * This value is written by the NIC such that it will be
	 * different for each pass through the completion queue. The
	 * even passes will write 1. The odd passes will write 0.
	 */
	#define CMPL_BASE_V	UINT32_C(0x1)
	/* info3 is 31 b */
	#define CMPL_BASE_INFO3_MASK	UINT32_C(0xfffffffe)
	#define CMPL_BASE_INFO3_SFT	1
	uint32_t info4;
	/* info4 is 32 b */
} __attribute__((packed));

/* TX Completion Record	(16 bytes) */
struct tx_cmpl {
	uint16_t flags_type;
	/*
	 * This field indicates the exact type of the completion. By
	 * convention, the LSB identifies the length of the record in
	 * 16B units. Even values indicate 16B records. Odd values
	 * indicate 32B records.
	 */
	#define TX_CMPL_TYPE_MASK	UINT32_C(0x3f)
	#define TX_CMPL_TYPE_SFT	0
	/* TX L2 completion: Completion of TX packet. Length = 16B */
	#define TX_CMPL_TYPE_TX_L2	UINT32_C(0x0)
	/*
	 * When this bit is '1', it indicates a packet that has an error
	 * of some type. Type of error is indicated in error_flags.
	 */
	#define TX_CMPL_FLAGS_ERROR	UINT32_C(0x40)
	/*
	 * When this bit is '1', it indicates that the packet completed
	 * was transmitted using the push acceleration data provided by
	 * the driver. When this bit is '0', it indicates that the
	 * packet had not push acceleration data written or was executed
	 * as a normal packet even though push data was provided.
	 */
	#define TX_CMPL_FLAGS_PUSH	UINT32_C(0x80)
	#define TX_CMPL_FLAGS_MASK	UINT32_C(0xffc0)
	#define TX_CMPL_FLAGS_SFT	6
	uint16_t unused_0;
	/* unused1 is 16 b */
	uint32_t opaque;
	/*
	 * This is a copy of the opaque field from the first TX BD of
	 * this transmitted packet.
	 */
	uint16_t errors_v;
	/*
	 * This value is written by the NIC such that it will be
	 * different for each pass through the completion queue. The
	 * even passes will write 1. The odd passes will write 0.
	 */
	#define TX_CMPL_V	UINT32_C(0x1)
	/*
	 * This error indicates that there was some sort of problem with
	 * the BDs for the packet.
	 */
	#define TX_CMPL_ERRORS_BUFFER_ERROR_MASK	UINT32_C(0xe)
	#define TX_CMPL_ERRORS_BUFFER_ERROR_SFT	1
	/* No error */
	#define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR	(UINT32_C(0x0) << 1)
	/* Bad Format: BDs were not formatted correctly. */
	#define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT	(UINT32_C(0x2) << 1)
	#define TX_CMPL_ERRORS_BUFFER_ERROR_LAST \
		TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT
	/*
	 * When this bit is '1', it indicates that the length of the
	 * packet was zero. No packet was transmitted.
	 */
	#define TX_CMPL_ERRORS_ZERO_LENGTH_PKT	UINT32_C(0x10)
	/*
	 * When this bit is '1', it indicates that the packet was longer
	 * than the programmed limit in TDI. No packet was transmitted.
	 */
	#define TX_CMPL_ERRORS_EXCESSIVE_BD_LENGTH	UINT32_C(0x20)
	/*
	 * When this bit is '1', it indicates that one or more of the
	 * BDs associated with this packet generated a PCI error. This
	 * probably means the address was not valid.
	 */
	#define TX_CMPL_ERRORS_DMA_ERROR	UINT32_C(0x40)
	/*
	 * When this bit is '1', it indicates that the packet was longer
	 * than indicated by the hint. No packet was transmitted.
	 */
	#define TX_CMPL_ERRORS_HINT_TOO_SHORT	UINT32_C(0x80)
	/*
	 * When this bit is '1', it indicates that the packet was
	 * dropped due to Poison TLP error on one or more of the TLPs in
	 * the PXP completion.
	 */
	#define TX_CMPL_ERRORS_POISON_TLP_ERROR	UINT32_C(0x100)
	#define TX_CMPL_ERRORS_MASK	UINT32_C(0xfffe)
	#define TX_CMPL_ERRORS_SFT	1
	uint16_t unused_1;
	/* unused2 is 16 b */
	uint32_t unused_2;
	/* unused3 is 32 b */
} __attribute__((packed));

/* RX Packet Completion Record	(32 bytes split to 2 16-byte struct) */
struct rx_pkt_cmpl {
	uint16_t flags_type;
	/*
	 * This field indicates the exact type of the completion. By
	 * convention, the LSB identifies the length of the record in
	 * 16B units. Even values indicate 16B records. Odd values
	 * indicate 32B records.
	 */
	#define RX_PKT_CMPL_TYPE_MASK	UINT32_C(0x3f)
	#define RX_PKT_CMPL_TYPE_SFT	0
	/*
	 * RX L2 completion: Completion of and L2 RX
	 * packet. Length = 32B
	 */
	#define RX_PKT_CMPL_TYPE_RX_L2			UINT32_C(0x11)
	#define RX_PKT_CMPL_TYPE_RX_L2_TPA_START	UINT32_C(0x13)
	#define RX_PKT_CMPL_TYPE_RX_L2_TPA_END		UINT32_C(0x15)
	/*
	 * When this bit is '1', it indicates a packet that has an error
	 * of some type. Type of error is indicated in error_flags.
	 */
	#define RX_PKT_CMPL_FLAGS_ERROR	UINT32_C(0x40)
	/* This field indicates how the packet was placed in the buffer. */
	#define RX_PKT_CMPL_FLAGS_PLACEMENT_MASK	UINT32_C(0x380)
	#define RX_PKT_CMPL_FLAGS_PLACEMENT_SFT	7
	/* Normal: Packet was placed using normal algorithm. */
	#define RX_PKT_CMPL_FLAGS_PLACEMENT_NORMAL	(UINT32_C(0x0) << 7)
	/* Jumbo: Packet was placed using jumbo algorithm. */
	#define RX_PKT_CMPL_FLAGS_PLACEMENT_JUMBO	(UINT32_C(0x1) << 7)
	/*
	 * Header/Data Separation: Packet was placed
	 * using Header/Data separation algorithm. The
	 * separation location is indicated by the itype
	 * field.
	 */
	#define RX_PKT_CMPL_FLAGS_PLACEMENT_HDS	(UINT32_C(0x2) << 7)
	#define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST \
		RX_PKT_CMPL_FLAGS_PLACEMENT_HDS
	/* This bit is '1' if the RSS field in this completion is valid. */
	#define RX_PKT_CMPL_FLAGS_RSS_VALID	UINT32_C(0x400)
	/* unused is 1 b */
	#define RX_PKT_CMPL_FLAGS_UNUSED	UINT32_C(0x800)
	/*
	 * This value indicates what the inner packet determined for the
	 * packet was.
	 */
	#define RX_PKT_CMPL_FLAGS_ITYPE_MASK	UINT32_C(0xf000)
	#define RX_PKT_CMPL_FLAGS_ITYPE_SFT	12
	/* Not Known: Indicates that the packet type was not known. */
	#define RX_PKT_CMPL_FLAGS_ITYPE_NOT_KNOWN	(UINT32_C(0x0) << 12)
	/*
	 * IP Packet: Indicates that the packet was an
	 * IP packet, but further classification was not
	 * possible.
	 */
	#define RX_PKT_CMPL_FLAGS_ITYPE_IP	(UINT32_C(0x1) << 12)
	/*
	 * TCP Packet: Indicates that the packet was IP
	 * and TCP. This indicates that the
	 * payload_offset field is valid.
	 */
	#define RX_PKT_CMPL_FLAGS_ITYPE_TCP	(UINT32_C(0x2) << 12)
	/*
	 * UDP Packet: Indicates that the packet was IP
	 * and UDP. This indicates that the
	 * payload_offset field is valid.
	 */
	#define RX_PKT_CMPL_FLAGS_ITYPE_UDP	(UINT32_C(0x3) << 12)
	/*
	 * FCoE Packet: Indicates that the packet was
	 * recognized as a FCoE. This also indicates
	 * that the payload_offset field is valid.
	 */
	#define RX_PKT_CMPL_FLAGS_ITYPE_FCOE	(UINT32_C(0x4) << 12)
	/*
	 * RoCE Packet: Indicates that the packet was
	 * recognized as a RoCE. This also indicates
	 * that the payload_offset field is valid.
	 */
	#define RX_PKT_CMPL_FLAGS_ITYPE_ROCE	(UINT32_C(0x5) << 12)
	/*
	 * ICMP Packet: Indicates that the packet was
	 * recognized as ICMP. This indicates that the
	 * payload_offset field is valid.
	 */
	#define RX_PKT_CMPL_FLAGS_ITYPE_ICMP	(UINT32_C(0x7) << 12)
	/*
	 * PtP packet wo/timestamp: Indicates that the
	 * packet was recognized as a PtP packet.
	 */
	#define RX_PKT_CMPL_FLAGS_ITYPE_PTP_WO_TIMESTAMP	(UINT32_C(0x8) << 12)
	/*
	 * PtP packet w/timestamp: Indicates that the
	 * packet was recognized as a PtP packet and
	 * that a timestamp was taken for the packet.
	 */
	#define RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP	(UINT32_C(0x9) << 12)
	#define RX_PKT_CMPL_FLAGS_ITYPE_LAST \
		RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
	#define RX_PKT_CMPL_FLAGS_MASK	UINT32_C(0xffc0)
	#define RX_PKT_CMPL_FLAGS_SFT	6
	uint16_t len;
	/*
	 * This is the length of the data for the packet stored in the
	 * buffer(s) identified by the opaque value. This includes the
	 * packet BD and any associated buffer BDs. This does not
	 * include the the length of any data places in aggregation BDs.
	 */
	uint32_t opaque;
	/*
	 * This is a copy of the opaque field from the RX BD this
	 * completion corresponds to.
	 */
	uint8_t agg_bufs_v1;
	/* unused1 is 2 b */
	/*
	 * This value is written by the NIC such that it will be
	 * different for each pass through the completion queue. The
	 * even passes will write 1. The odd passes will write 0.
	 */
	#define RX_PKT_CMPL_V1	UINT32_C(0x1)
	/*
	 * This value is the number of aggregation buffers that follow
	 * this entry in the completion ring that are a part of this
	 * packet. If the value is zero, then the packet is completely
	 * contained in the buffer space provided for the packet in the
	 * RX ring.
	 */
	#define RX_PKT_CMPL_AGG_BUFS_MASK	UINT32_C(0x3e)
	#define RX_PKT_CMPL_AGG_BUFS_SFT	1
	/* unused1 is 2 b */
	uint8_t rss_hash_type;
	/*
	 * This is the RSS hash type for the packet. The value is packed
	 * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}
	 * . The value of tuple_extrac_op provides the information about
	 * what fields the hash was computed on. * 0: The RSS hash was
	 * computed over source IP address, destination IP address,
	 * source port, and destination port of inner IP and TCP or UDP
	 * headers. Note: For non-tunneled packets, the packet headers
	 * are considered inner packet headers for the RSS hash
	 * computation purpose. * 1: The RSS hash was computed over
	 * source IP address and destination IP address of inner IP
	 * header. Note: For non-tunneled packets, the packet headers
	 * are considered inner packet headers for the RSS hash
	 * computation purpose. * 2: The RSS hash was computed over
	 * source IP address, destination IP address, source port, and
	 * destination port of IP and TCP or UDP headers of outer tunnel
	 * headers. Note: For non-tunneled packets, this value is not
	 * applicable. * 3: The RSS hash was computed over source IP
	 * address and destination IP address of IP header of outer
	 * tunnel headers. Note: For non-tunneled packets, this value is
	 * not applicable. Note that 4-tuples values listed above are
	 * applicable for layer 4 protocols supported and enabled for
	 * RSS in the hardware, HWRM firmware, and drivers. For example,
	 * if RSS hash is supported and enabled for TCP traffic only,
	 * then the values of tuple_extract_op corresponding to 4-tuples
	 * are only valid for TCP traffic.
	 */
	uint8_t payload_offset;
	/*
	 * This value indicates the offset in bytes from the beginning
	 * of the packet where the inner payload starts. This value is
	 * valid for TCP, UDP, FCoE, and RoCE packets. A value of zero
	 * indicates that header is 256B into the packet.
	 */
	uint8_t unused_1;
	/* unused2 is 8 b */
	uint32_t rss_hash;
	/*
	 * This value is the RSS hash value calculated for the packet
	 * based on the mode bits and key value in the VNIC.
	 */
} __attribute__((packed));

/* last 16 bytes of RX Packet Completion Record */
struct rx_pkt_cmpl_hi {
	uint32_t flags2;
	/*
	 * This indicates that the ip checksum was calculated for the
	 * inner packet and that the ip_cs_error field indicates if
	 * there was an error.
	 */
	#define RX_PKT_CMPL_FLAGS2_IP_CS_CALC	UINT32_C(0x1)
	/*
	 * This indicates that the TCP, UDP or ICMP checksum was
	 * calculated for the inner packet and that the l4_cs_error
	 * field indicates if there was an error.
	 */
	#define RX_PKT_CMPL_FLAGS2_L4_CS_CALC	UINT32_C(0x2)
	/*
	 * This indicates that the ip checksum was calculated for the
	 * tunnel header and that the t_ip_cs_error field indicates if
	 * there was an error.
	 */
	#define RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC	UINT32_C(0x4)
	/*
	 * This indicates that the UDP checksum was calculated for the
	 * tunnel packet and that the t_l4_cs_error field indicates if
	 * there was an error.
	 */
	#define RX_PKT_CMPL_FLAGS2_T_L4_CS_CALC	UINT32_C(0x8)
	/* This value indicates what format the metadata field is. */
	#define RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK	UINT32_C(0xf0)
	#define RX_PKT_CMPL_FLAGS2_META_FORMAT_SFT	4
	/* No metadata informtaion. Value is zero. */
	#define RX_PKT_CMPL_FLAGS2_META_FORMAT_NONE	(UINT32_C(0x0) << 4)
	/*
	 * The metadata field contains the VLAN tag and
	 * TPID value. - metadata[11:0] contains the
	 * vlan VID value. - metadata[12] contains the
	 * vlan DE value. - metadata[15:13] contains the
	 * vlan PRI value. - metadata[31:16] contains
	 * the vlan TPID value.
	 */
	#define RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN	(UINT32_C(0x1) << 4)
	#define RX_PKT_CMPL_FLAGS2_META_FORMAT_LAST \
		RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN
	/*
	 * This field indicates the IP type for the inner-most IP
	 * header. A value of '0' indicates IPv4. A value of '1'
	 * indicates IPv6. This value is only valid if itype indicates a
	 * packet with an IP header.
	 */
	#define RX_PKT_CMPL_FLAGS2_IP_TYPE	UINT32_C(0x100)
	uint32_t metadata;
	/*
	 * This is data from the CFA block as indicated by the
	 * meta_format field.
	 */
	/* When meta_format=1, this value is the VLAN VID. */
	#define RX_PKT_CMPL_METADATA_VID_MASK	UINT32_C(0xfff)
	#define RX_PKT_CMPL_METADATA_VID_SFT	0
	/* When meta_format=1, this value is the VLAN DE. */
	#define RX_PKT_CMPL_METADATA_DE	UINT32_C(0x1000)
	/* When meta_format=1, this value is the VLAN PRI. */
	#define RX_PKT_CMPL_METADATA_PRI_MASK	UINT32_C(0xe000)
	#define RX_PKT_CMPL_METADATA_PRI_SFT	13
	/* When meta_format=1, this value is the VLAN TPID. */
	#define RX_PKT_CMPL_METADATA_TPID_MASK	UINT32_C(0xffff0000)
	#define RX_PKT_CMPL_METADATA_TPID_SFT	16
	uint16_t errors_v2;
	/*
	 * This value is written by the NIC such that it will be
	 * different for each pass through the completion queue. The
	 * even passes will write 1. The odd passes will write 0.
	 */
	#define RX_PKT_CMPL_V2	UINT32_C(0x1)
	/*
	 * This error indicates that there was some sort of problem with
	 * the BDs for the packet that was found after part of the
	 * packet was already placed. The packet should be treated as
	 * invalid.
	 */
	#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_MASK	UINT32_C(0xe)
	#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_SFT	1
	/* No buffer error */
	#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER	(UINT32_C(0x0) << 1)
	/*
	 * Did Not Fit: Packet did not fit into packet
	 * buffer provided. For regular placement, this
	 * means the packet did not fit in the buffer
	 * provided. For HDS and jumbo placement, this
	 * means that the packet could not be placed
	 * into 7 physical buffers or less.
	 */
	#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
		(UINT32_C(0x1) << 1)
	/*
	 * Not On Chip: All BDs needed for the packet
	 * were not on-chip when the packet arrived.
	 */
	#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
		(UINT32_C(0x2) << 1)
	/* Bad Format: BDs were not formatted correctly. */
	#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
		(UINT32_C(0x3) << 1)
	#define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_LAST \
		RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT
	/* This indicates that there was an error in the IP header checksum. */
	#define RX_PKT_CMPL_ERRORS_IP_CS_ERROR	UINT32_C(0x10)
	/*
	 * This indicates that there was an error in the TCP, UDP or
	 * ICMP checksum.
	 */
	#define RX_PKT_CMPL_ERRORS_L4_CS_ERROR	UINT32_C(0x20)
	/*
	 * This indicates that there was an error in the tunnel IP
	 * header checksum.
	 */
	#define RX_PKT_CMPL_ERRORS_T_IP_CS_ERROR	UINT32_C(0x40)
	/*
	 * This indicates that there was an error in the tunnel UDP
	 * checksum.
	 */
	#define RX_PKT_CMPL_ERRORS_T_L4_CS_ERROR	UINT32_C(0x80)
	/*
	 * This indicates that there was a CRC error on either an FCoE
	 * or RoCE packet. The itype indicates the packet type.
	 */
	#define RX_PKT_CMPL_ERRORS_CRC_ERROR	UINT32_C(0x100)
	/*
	 * This indicates that there was an error in the tunnel portion
	 * of the packet when this field is non-zero.
	 */
	#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_MASK	UINT32_C(0xe00)
	#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_SFT	9
	/*
	 * No additional error occurred on the tunnel
	 * portion of the packet of the packet does not
	 * have a tunnel.
	 */
	#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_NO_ERROR	(UINT32_C(0x0) << 9)
	/*
	 * Indicates that IP header version does not
	 * match expectation from L2 Ethertype for IPv4
	 * and IPv6 in the tunnel header.
	 */
	#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION \
		(UINT32_C(0x1) << 9)
	/*
	 * Indicates that header length is out of range
	 * in the tunnel header. Valid for IPv4.
	 */
	#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN \
		(UINT32_C(0x2) << 9)
	/*
	 * Indicates that the physical packet is shorter
	 * than that claimed by the PPPoE header length
	 * for a tunnel PPPoE packet.
	 */
	#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_TUNNEL_TOTAL_ERROR \
		(UINT32_C(0x3) << 9)
	/*
	 * Indicates that physical packet is shorter
	 * than that claimed by the tunnel l3 header
	 * length. Valid for IPv4, or IPv6 tunnel packet
	 * packets.
	 */
	#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR \
		(UINT32_C(0x4) << 9)
	/*
	 * Indicates that the physical packet is shorter
	 * than that claimed by the tunnel UDP header
	 * length for a tunnel UDP packet that is not
	 * fragmented.
	 */
	#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR \
		(UINT32_C(0x5) << 9)
	/*
	 * indicates that the IPv4 TTL or IPv6 hop limit
	 * check have failed	(e.g. TTL = 0) in the
	 * tunnel header. Valid for IPv4, and IPv6.
	 */
	#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL \
		(UINT32_C(0x6) << 9)
	#define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_LAST \
		RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL
	/*
	 * This indicates that there was an error in the inner portion
	 * of the packet when this field is non-zero.
	 */
	#define RX_PKT_CMPL_ERRORS_PKT_ERROR_MASK	UINT32_C(0xf000)
	#define RX_PKT_CMPL_ERRORS_PKT_ERROR_SFT	12
	/*
	 * No additional error occurred on the tunnel
	 * portion of the packet of the packet does not
	 * have a tunnel.
	 */
	#define RX_PKT_CMPL_ERRORS_PKT_ERROR_NO_ERROR	(UINT32_C(0x0) << 12)
	/*
	 * Indicates that IP header version does not
	 * match expectation from L2 Ethertype for IPv4
	 * and IPv6 or that option other than VFT was
	 * parsed on FCoE packet.
	 */
	#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_VERSION \
		(UINT32_C(0x1) << 12)
	/*
	 * indicates that header length is out of range.
	 * Valid for IPv4 and RoCE
	 */
	#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN \
		(UINT32_C(0x2) << 12)
	/*
	 * indicates that the IPv4 TTL or IPv6 hop limit
	 * check have failed	(e.g. TTL = 0). Valid for
	 * IPv4, and IPv6
	 */
	#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_TTL	(UINT32_C(0x3) << 12)
	/*
	 * Indicates that physical packet is shorter
	 * than that claimed by the l3 header length.
	 * Valid for IPv4, IPv6 packet or RoCE packets.
	 */
	#define RX_PKT_CMPL_ERRORS_PKT_ERROR_IP_TOTAL_ERROR \
		(UINT32_C(0x4) << 12)
	/*
	 * Indicates that the physical packet is shorter
	 * than that claimed by the UDP header length
	 * for a UDP packet that is not fragmented.
	 */
	#define RX_PKT_CMPL_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR \
		(UINT32_C(0x5) << 12)
	/*
	 * Indicates that TCP header length > IP
	 * payload. Valid for TCP packets only.
	 */
	#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN \
		(UINT32_C(0x6) << 12)
	/* Indicates that TCP header length < 5. Valid for TCP. */
	#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN_TOO_SMALL \
		(UINT32_C(0x7) << 12)
	/*
	 * Indicates that TCP option headers result in a
	 * TCP header size that does not match data
	 * offset in TCP header. Valid for TCP.
	 */
	#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \
		(UINT32_C(0x8) << 12)
	#define RX_PKT_CMPL_ERRORS_PKT_ERROR_LAST \
		RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN
	#define RX_PKT_CMPL_ERRORS_MASK	UINT32_C(0xfffe)
	#define RX_PKT_CMPL_ERRORS_SFT	1
	uint16_t cfa_code;
	/*
	 * This field identifies the CFA action rule that was used for
	 * this packet.
	 */
	uint32_t reorder;
	/*
	 * This value holds the reordering sequence number for the
	 * packet. If the reordering sequence is not valid, then this
	 * value is zero. The reordering domain for the packet is in the
	 * bottom 8 to 10b of the rss_hash value. The bottom 20b of this
	 * value contain the ordering domain value for the packet.
	 */
	#define RX_PKT_CMPL_REORDER_MASK	UINT32_C(0xffffff)
	#define RX_PKT_CMPL_REORDER_SFT	0
} __attribute__((packed));

/* RX L2 TPA Start Completion Record (32 bytes split to 2 16-byte struct) */
struct rx_tpa_start_cmpl {
	uint16_t flags_type;
	/*
	 * This field indicates the exact type of the completion. By
	 * convention, the LSB identifies the length of the record in
	 * 16B units. Even values indicate 16B records. Odd values
	 * indicate 32B records.
	 */
	#define RX_TPA_START_CMPL_TYPE_MASK	UINT32_C(0x3f)
	#define RX_TPA_START_CMPL_TYPE_SFT	0
	/*
	 * RX L2 TPA Start Completion: Completion at the
	 * beginning of a TPA operation. Length = 32B
	 */
	#define RX_TPA_START_CMPL_TYPE_RX_TPA_START	UINT32_C(0x13)
	/* This bit will always be '0' for TPA start completions. */
	#define RX_TPA_START_CMPL_FLAGS_ERROR	UINT32_C(0x40)
	/* This field indicates how the packet was placed in the buffer. */
	#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_MASK	UINT32_C(0x380)
	#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT	7
	/*
	 * Jumbo: TPA Packet was placed using jumbo
	 * algorithm. This means that the first buffer
	 * will be filled with data before moving to
	 * aggregation buffers. Each aggregation buffer
	 * will be filled before moving to the next
	 * aggregation buffer.
	 */
	#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_JUMBO	(UINT32_C(0x1) << 7)
	/*
	 * Header/Data Separation: Packet was placed
	 * using Header/Data separation algorithm. The
	 * separation location is indicated by the itype
	 * field.
	 */
	#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_HDS	(UINT32_C(0x2) << 7)
	/*
	 * GRO/Jumbo: Packet will be placed using
	 * GRO/Jumbo where the first packet is filled
	 * with data. Subsequent packets will be placed
	 * such that any one packet does not span two
	 * aggregation buffers unless it starts at the
	 * beginning of an aggregation buffer.
	 */
	#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
		(UINT32_C(0x5) << 7)
	/*
	 * GRO/Header-Data Separation: Packet will be
	 * placed using GRO/HDS where the header is in
	 * the first packet. Payload of each packet will
	 * be placed such that any one packet does not
	 * span two aggregation buffers unless it starts
	 * at the beginning of an aggregation buffer.
	 */
	#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS (UINT32_C(0x6) << 7)
	#define RX_TPA_START_CMPL_FLAGS_PLACEMENT_LAST \
		RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS
	/* This bit is '1' if the RSS field in this completion is valid. */
	#define RX_TPA_START_CMPL_FLAGS_RSS_VALID	UINT32_C(0x400)
	/* unused is 1 b */
	#define RX_TPA_START_CMPL_FLAGS_UNUSED	UINT32_C(0x800)
	/*
	 * This value indicates what the inner packet determined for the
	 * packet was.
	 */
	#define RX_TPA_START_CMPL_FLAGS_ITYPE_MASK	UINT32_C(0xf000)
	#define RX_TPA_START_CMPL_FLAGS_ITYPE_SFT	12
	/* TCP Packet: Indicates that the packet was IP and TCP. */
	#define RX_TPA_START_CMPL_FLAGS_ITYPE_TCP	(UINT32_C(0x2) << 12)
	#define RX_TPA_START_CMPL_FLAGS_ITYPE_LAST \
		RX_TPA_START_CMPL_FLAGS_ITYPE_TCP
	#define RX_TPA_START_CMPL_FLAGS_MASK	UINT32_C(0xffc0)
	#define RX_TPA_START_CMPL_FLAGS_SFT	6
	uint16_t len;
	/*
	 * This value indicates the amount of packet data written to the
	 * buffer the opaque field in this completion corresponds to.
	 */
	uint32_t opaque;
	/*
	 * This is a copy of the opaque field from the RX BD this
	 * completion corresponds to.
	 */
	uint8_t v1;
	/* unused1 is 7 b */
	/*
	 * This value is written by the NIC such that it will be
	 * different for each pass through the completion queue. The
	 * even passes will write 1. The odd passes will write 0.
	 */
	#define RX_TPA_START_CMPL_V1	UINT32_C(0x1)
	/* unused1 is 7 b */
	uint8_t rss_hash_type;
	/*
	 * This is the RSS hash type for the packet. The value is packed
	 * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}
	 * . The value of tuple_extrac_op provides the information about
	 * what fields the hash was computed on. * 0: The RSS hash was
	 * computed over source IP address, destination IP address,
	 * source port, and destination port of inner IP and TCP or UDP
	 * headers. Note: For non-tunneled packets, the packet headers
	 * are considered inner packet headers for the RSS hash
	 * computation purpose. * 1: The RSS hash was computed over
	 * source IP address and destination IP address of inner IP
	 * header. Note: For non-tunneled packets, the packet headers
	 * are considered inner packet headers for the RSS hash
	 * computation purpose. * 2: The RSS hash was computed over
	 * source IP address, destination IP address, source port, and
	 * destination port of IP and TCP or UDP headers of outer tunnel
	 * headers. Note: For non-tunneled packets, this value is not
	 * applicable. * 3: The RSS hash was computed over source IP
	 * address and destination IP address of IP header of outer
	 * tunnel headers. Note: For non-tunneled packets, this value is
	 * not applicable. Note that 4-tuples values listed above are
	 * applicable for layer 4 protocols supported and enabled for
	 * RSS in the hardware, HWRM firmware, and drivers. For example,
	 * if RSS hash is supported and enabled for TCP traffic only,
	 * then the values of tuple_extract_op corresponding to 4-tuples
	 * are only valid for TCP traffic.
	 */
	uint16_t agg_id;
	/*
	 * This is the aggregation ID that the completion is associated
	 * with. Use this number to correlate the TPA start completion
	 * with the TPA end completion.
	 */
	/* unused2 is 9 b */
	/*
	 * This is the aggregation ID that the completion is associated
	 * with. Use this number to correlate the TPA start completion
	 * with the TPA end completion.
	 */
	#define RX_TPA_START_CMPL_AGG_ID_MASK	UINT32_C(0xfe00)
	#define RX_TPA_START_CMPL_AGG_ID_SFT	9
	uint32_t rss_hash;
	/*
	 * This value is the RSS hash value calculated for the packet
	 * based on the mode bits and key value in the VNIC.
	 */
} __attribute__((packed));

/* last 16 bytes of RX L2 TPA Start Completion Record */
struct rx_tpa_start_cmpl_hi {
	uint32_t flags2;
	/*
	 * This indicates that the ip checksum was calculated for the
	 * inner packet and that the sum passed for all segments
	 * included in the aggregation.
	 */
	#define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC	UINT32_C(0x1)
	/*
	 * This indicates that the TCP, UDP or ICMP checksum was
	 * calculated for the inner packet and that the sum passed for
	 * all segments included in the aggregation.
	 */
	#define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC	UINT32_C(0x2)
	/*
	 * This indicates that the ip checksum was calculated for the
	 * tunnel header and that the sum passed for all segments
	 * included in the aggregation.
	 */
	#define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC	UINT32_C(0x4)
	/*
	 * This indicates that the UDP checksum was calculated for the
	 * tunnel packet and that the sum passed for all segments
	 * included in the aggregation.
	 */
	#define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC	UINT32_C(0x8)
	/* This value indicates what format the metadata field is. */
	#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
	#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT	4
	/* No metadata informtaion. Value is zero. */
	#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE (UINT32_C(0x0) << 4)
	/*
	 * The metadata field contains the VLAN tag and
	 * TPID value. - metadata[11:0] contains the
	 * vlan VID value. - metadata[12] contains the
	 * vlan DE value. - metadata[15:13] contains the
	 * vlan PRI value. - metadata[31:16] contains
	 * the vlan TPID value.
	 */
	#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4)
	#define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_LAST \
		RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN
	/*
	 * This field indicates the IP type for the inner-most IP
	 * header. A value of '0' indicates IPv4. A value of '1'
	 * indicates IPv6.
	 */
	#define RX_TPA_START_CMPL_FLAGS2_IP_TYPE	UINT32_C(0x100)
	uint32_t metadata;
	/*
	 * This is data from the CFA block as indicated by the
	 * meta_format field.
	 */
	/* When meta_format=1, this value is the VLAN VID. */
	#define RX_TPA_START_CMPL_METADATA_VID_MASK	UINT32_C(0xfff)
	#define RX_TPA_START_CMPL_METADATA_VID_SFT	0
	/* When meta_format=1, this value is the VLAN DE. */
	#define RX_TPA_START_CMPL_METADATA_DE	UINT32_C(0x1000)
	/* When meta_format=1, this value is the VLAN PRI. */
	#define RX_TPA_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
	#define RX_TPA_START_CMPL_METADATA_PRI_SFT	13
	/* When meta_format=1, this value is the VLAN TPID. */
	#define RX_TPA_START_CMPL_METADATA_TPID_MASK	UINT32_C(0xffff0000)
	#define RX_TPA_START_CMPL_METADATA_TPID_SFT	16
	uint16_t v2;
	/* unused4 is 15 b */
	/*
	 * This value is written by the NIC such that it will be
	 * different for each pass through the completion queue. The
	 * even passes will write 1. The odd passes will write 0.
	 */
	#define RX_TPA_START_CMPL_V2	UINT32_C(0x1)
	/* unused4 is 15 b */
	uint16_t cfa_code;
	/*
	 * This field identifies the CFA action rule that was used for
	 * this packet.
	 */
	uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset;
	/*
	 * This is the size in bytes of the inner most L4 header. This
	 * can be subtracted from the payload_offset to determine the
	 * start of the inner most L4 header.
	 */
	/*
	 * This is the offset from the beginning of the packet in bytes
	 * for the outer L3 header. If there is no outer L3 header, then
	 * this value is zero.
	 */
	#define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK	UINT32_C(0x1ff)
	#define RX_TPA_START_CMPL_OUTER_L3_OFFSET_SFT	0
	/*
	 * This is the offset from the beginning of the packet in bytes
	 * for the inner most L2 header.
	 */
	#define RX_TPA_START_CMPL_INNER_L2_OFFSET_MASK	UINT32_C(0x3fe00)
	#define RX_TPA_START_CMPL_INNER_L2_OFFSET_SFT	9
	/*
	 * This is the offset from the beginning of the packet in bytes
	 * for the inner most L3 header.
	 */
	#define RX_TPA_START_CMPL_INNER_L3_OFFSET_MASK	UINT32_C(0x7fc0000)
	#define RX_TPA_START_CMPL_INNER_L3_OFFSET_SFT	18
	/*
	 * This is the size in bytes of the inner most L4 header. This
	 * can be subtracted from the payload_offset to determine the
	 * start of the inner most L4 header.
	 */
	#define RX_TPA_START_CMPL_INNER_L4_SIZE_MASK	UINT32_C(0xf8000000)
	#define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT	27
} __attribute__((packed));

/* RX TPA End Completion Record (32 bytes split to 2 16-byte struct) */
struct rx_tpa_end_cmpl {
	uint16_t flags_type;
	/*
	 * This field indicates the exact type of the completion. By
	 * convention, the LSB identifies the length of the record in
	 * 16B units. Even values indicate 16B records. Odd values
	 * indicate 32B records.
	 */
	#define RX_TPA_END_CMPL_TYPE_MASK	UINT32_C(0x3f)
	#define RX_TPA_END_CMPL_TYPE_SFT	0
	/*
	 * RX L2 TPA End Completion: Completion at the
	 * end of a TPA operation. Length = 32B
	 */
	#define RX_TPA_END_CMPL_TYPE_RX_TPA_END	UINT32_C(0x15)
	/*
	 * When this bit is '1', it indicates a packet that has an error
	 * of some type. Type of error is indicated in error_flags.
	 */
	#define RX_TPA_END_CMPL_FLAGS_ERROR	UINT32_C(0x40)
	/* This field indicates how the packet was placed in the buffer. */
	#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_MASK	UINT32_C(0x380)
	#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT	7
	/*
	 * Jumbo: TPA Packet was placed using jumbo
	 * algorithm. This means that the first buffer
	 * will be filled with data before moving to
	 * aggregation buffers. Each aggregation buffer
	 * will be filled before moving to the next
	 * aggregation buffer.
	 */
	#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_JUMBO	(UINT32_C(0x1) << 7)
	/*
	 * Header/Data Separation: Packet was placed
	 * using Header/Data separation algorithm. The
	 * separation location is indicated by the itype
	 * field.
	 */
	#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_HDS	(UINT32_C(0x2) << 7)
	/*
	 * GRO/Jumbo: Packet will be placed using
	 * GRO/Jumbo where the first packet is filled
	 * with data. Subsequent packets will be placed
	 * such that any one packet does not span two
	 * aggregation buffers unless it starts at the
	 * beginning of an aggregation buffer.
	 */
	#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO (UINT32_C(0x5) << 7)
	/*
	 * GRO/Header-Data Separation: Packet will be
	 * placed using GRO/HDS where the header is in
	 * the first packet. Payload of each packet will
	 * be placed such that any one packet does not
	 * span two aggregation buffers unless it starts
	 * at the beginning of an aggregation buffer.
	 */
	#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS	(UINT32_C(0x6) << 7)
	#define RX_TPA_END_CMPL_FLAGS_PLACEMENT_LAST \
		RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS
	/* unused is 2 b */
	#define RX_TPA_END_CMPL_FLAGS_UNUSED_MASK	UINT32_C(0xc00)
	#define RX_TPA_END_CMPL_FLAGS_UNUSED_SFT	10
	/*
	 * This value indicates what the inner packet determined for the
	 * packet was. - 2 TCP Packet Indicates that the packet was IP
	 * and TCP. This indicates that the ip_cs field is valid and
	 * that the tcp_udp_cs field is valid and contains the TCP
	 * checksum. This also indicates that the payload_offset field
	 * is valid.
	 */
	#define RX_TPA_END_CMPL_FLAGS_ITYPE_MASK	UINT32_C(0xf000)
	#define RX_TPA_END_CMPL_FLAGS_ITYPE_SFT	12
	#define RX_TPA_END_CMPL_FLAGS_MASK	UINT32_C(0xffc0)
	#define RX_TPA_END_CMPL_FLAGS_SFT	6
	uint16_t len;
	/*
	 * This value is zero for TPA End completions. There is no data
	 * in the buffer that corresponds to the opaque value in this
	 * completion.
	 */
	uint32_t opaque;
	/*
	 * This is a copy of the opaque field from the RX BD this
	 * completion corresponds to.
	 */
	uint8_t agg_bufs_v1;
	/* unused1 is 1 b */
	/*
	 * This value is written by the NIC such that it will be
	 * different for each pass through the completion queue. The
	 * even passes will write 1. The odd passes will write 0.
	 */
	#define RX_TPA_END_CMPL_V1	UINT32_C(0x1)
	/*
	 * This value is the number of aggregation buffers that follow
	 * this entry in the completion ring that are a part of this
	 * aggregation packet. If the value is zero, then the packet is
	 * completely contained in the buffer space provided in the
	 * aggregation start completion.
	 */
	#define RX_TPA_END_CMPL_AGG_BUFS_MASK	UINT32_C(0x7e)
	#define RX_TPA_END_CMPL_AGG_BUFS_SFT	1
	/* unused1 is 1 b */
	uint8_t tpa_segs;
	/* This value is the number of segments in the TPA operation. */
	uint8_t payload_offset;
	/*
	 * This value indicates the offset in bytes from the beginning
	 * of the packet where the inner payload starts. This value is
	 * valid for TCP, UDP, FCoE, and RoCE packets. A value of zero
	 * indicates an offset of 256 bytes.
	 */
	uint8_t agg_id;
	/*
	 * This is the aggregation ID that the completion is associated
	 * with. Use this number to correlate the TPA start completion
	 * with the TPA end completion.
	 */
	/* unused2 is 1 b */
	/*
	 * This is the aggregation ID that the completion is associated
	 * with. Use this number to correlate the TPA start completion
	 * with the TPA end completion.
	 */
	#define RX_TPA_END_CMPL_AGG_ID_MASK	UINT32_C(0xfe)
	#define RX_TPA_END_CMPL_AGG_ID_SFT	1
	uint32_t tsdelta;
	/*
	 * For non-GRO packets, this value is the timestamp delta
	 * between earliest and latest timestamp values for TPA packet.
	 * If packets were not time stamped, then delta will be zero.
	 * For GRO packets, this field is zero except for the following
	 * sub-fields. - tsdelta[31] Timestamp present indication. When
	 * '0', no Timestamp option is in the packet. When '1', then a
	 * Timestamp option is present in the packet.
	 */
} __attribute__((packed));

/* last 16 bytes of RX TPA End Completion Record */
struct rx_tpa_end_cmpl_hi {
	uint32_t tpa_dup_acks;
	/* unused3 is 28 b */
	/*
	 * This value is the number of duplicate ACKs that have been
	 * received as part of the TPA operation.
	 */
	#define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK	UINT32_C(0xf)
	#define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT	0
	/* unused3 is 28 b */
	uint16_t tpa_seg_len;
	/*
	 * This value is the valid when TPA completion is active. It
	 * indicates the length of the longest segment of the TPA
	 * operation for LRO mode and the length of the first segment in
	 * GRO mode. This value may be used by GRO software to re-
	 * construct the original packet stream from the TPA packet.
	 * This is the length of all but the last segment for GRO. In
	 * LRO mode this value may be used to indicate MSS size to the
	 * stack.
	 */
	uint16_t unused_3;
	/* unused4 is 16 b */
	uint16_t errors_v2;
	/*
	 * This value is written by the NIC such that it will be
	 * different for each pass through the completion queue. The
	 * even passes will write 1. The odd passes will write 0.
	 */
	#define RX_TPA_END_CMPL_V2	UINT32_C(0x1)
	/*
	 * This error indicates that there was some sort of problem with
	 * the BDs for the packet that was found after part of the
	 * packet was already placed. The packet should be treated as
	 * invalid.
	 */
	#define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK	UINT32_C(0xe)
	#define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT	1
	/*
	 * This error occurs when there is a fatal HW
	 * problem in the chip only. It indicates that
	 * there were not BDs on chip but that there was
	 * adequate reservation. provided by the TPA
	 * block.
	 */
	#define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
		(UINT32_C(0x2) << 1)
	/*
	 * This error occurs when TPA block was not
	 * configured to reserve adequate BDs for TPA
	 * operations on this RX ring. All data for the
	 * TPA operation was not placed. This error can
	 * also be generated when the number of segments
	 * is not programmed correctly in TPA and the 33
	 * total aggregation buffers allowed for the TPA
	 * operation has been exceeded.
	 */
	#define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \
		(UINT32_C(0x4) << 1)
	#define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST \
		RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR
	#define RX_TPA_END_CMPL_ERRORS_MASK	UINT32_C(0xfffe)
	#define RX_TPA_END_CMPL_ERRORS_SFT	1
	uint16_t unused_4;
	/* unused5 is 16 b */
	uint32_t start_opaque;
	/*
	 * This is the opaque value that was completed for the TPA start
	 * completion that corresponds to this TPA end completion.
	 */
} __attribute__((packed));

/* HWRM Forwarded Request	(16 bytes) */
struct hwrm_fwd_req_cmpl {
	uint16_t req_len_type;
	/* Length of forwarded request in bytes. */
	/*
	 * This field indicates the exact type of the completion. By
	 * convention, the LSB identifies the length of the record in
	 * 16B units. Even values indicate 16B records. Odd values
	 * indicate 32B records.
	 */
	#define HWRM_FWD_INPUT_CMPL_TYPE_MASK	UINT32_C(0x3f)
	#define HWRM_FWD_INPUT_CMPL_TYPE_SFT	0
	/* Forwarded HWRM Request */
	#define HWRM_FWD_INPUT_CMPL_TYPE_HWRM_FWD_INPUT	UINT32_C(0x22)
	/* Length of forwarded request in bytes. */
	#define HWRM_FWD_REQ_CMPL_REQ_LEN_MASK	UINT32_C(0xffc0)
	#define HWRM_FWD_REQ_CMPL_REQ_LEN_SFT	6
	uint16_t source_id;
	/*
	 * Source ID of this request. Typically used in forwarding
	 * requests and responses. 0x0 - 0xFFF8 - Used for function ids
	 * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF -
	 * HWRM
	 */
	uint32_t unused_0;
	/* unused1 is 32 b */
	uint32_t req_buf_addr_v[2];
	/* Address of forwarded request. */
	/*
	 * This value is written by the NIC such that it will be
	 * different for each pass through the completion queue. The
	 * even passes will write 1. The odd passes will write 0.
	 */
	#define HWRM_FWD_INPUT_CMPL_V	UINT32_C(0x1)
	/* Address of forwarded request. */
	#define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_MASK	UINT32_C(0xfffffffe)
	#define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT	1
} __attribute__((packed));

/* HWRM Asynchronous Event Completion Record	(16 bytes) */
struct hwrm_async_event_cmpl {
	uint16_t type;
	/* unused1 is 10 b */
	/*
	 * This field indicates the exact type of the completion. By
	 * convention, the LSB identifies the length of the record in
	 * 16B units. Even values indicate 16B records. Odd values
	 * indicate 32B records.
	 */
	#define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK	UINT32_C(0x3f)
	#define HWRM_ASYNC_EVENT_CMPL_TYPE_SFT	0
	/* HWRM Asynchronous Event Information */
	#define HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT	UINT32_C(0x2e)
	/* unused1 is 10 b */
	uint16_t event_id;
	/* Identifiers of events. */
	/* Link status changed */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE UINT32_C(0x0)
	/* Link MTU changed */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE	UINT32_C(0x1)
	/* Link speed changed */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE UINT32_C(0x2)
	/* DCB Configuration changed */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE UINT32_C(0x3)
	/* Port connection not allowed */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED UINT32_C(0x4)
	/* Link speed configuration was not allowed */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \
		UINT32_C(0x5)
	/* Link speed configuration change */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE UINT32_C(0x6)
	/* Port PHY configuration change */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_PHY_CFG_CHANGE UINT32_C(0x7)
	/* Function driver unloaded */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD UINT32_C(0x10)
	/* Function driver loaded */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD	UINT32_C(0x11)
	/* Function FLR related processing has completed */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_FLR_PROC_CMPLT UINT32_C(0x12)
	/* PF driver unloaded */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD	UINT32_C(0x20)
	/* PF driver loaded */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_LOAD	UINT32_C(0x21)
	/* VF Function Level Reset	(FLR) */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR	UINT32_C(0x30)
	/* VF MAC Address Change */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE UINT32_C(0x31)
	/* PF-VF communication channel status change. */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \
		UINT32_C(0x32)
	/* VF Configuration Change */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE	UINT32_C(0x33)
	/* HWRM Error */
	#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR	UINT32_C(0xff)
	uint32_t event_data2;
	/* Event specific data */
	uint8_t opaque_v;
	/* opaque is 7 b */
	/*
	 * This value is written by the NIC such that it will be
	 * different for each pass through the completion queue. The
	 * even passes will write 1. The odd passes will write 0.
	 */
	#define HWRM_ASYNC_EVENT_CMPL_V	UINT32_C(0x1)
	/* opaque is 7 b */
	#define HWRM_ASYNC_EVENT_CMPL_OPAQUE_MASK	UINT32_C(0xfe)
	#define HWRM_ASYNC_EVENT_CMPL_OPAQUE_SFT	1
	uint8_t timestamp_lo;
	/* 8-lsb timestamp from POR	(100-msec resolution) */
	uint16_t timestamp_hi;
	/* 16-lsb timestamp from POR	(100-msec resolution) */
	uint32_t event_data1;
	/* Event specific data */
} __attribute__((packed));

/* hwrm_ver_get */
/*
 * Description: This function is called by a driver to determine the HWRM
 * interface version supported by the HWRM firmware, the version of HWRM
 * firmware implementation, the name of HWRM firmware, the versions of other
 * embedded firmwares, and the names of other embedded firmwares, etc. Any
 * interface or firmware version with major = 0, minor = 0, and update = 0 shall
 * be considered an invalid version.
 */
/* Input	(24 bytes) */
struct hwrm_ver_get_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint8_t hwrm_intf_maj;
	/*
	 * This field represents the major version of HWRM interface
	 * specification supported by the driver HWRM implementation.
	 * The interface major version is intended to change only when
	 * non backward compatible changes are made to the HWRM
	 * interface specification.
	 */
	uint8_t hwrm_intf_min;
	/*
	 * This field represents the minor version of HWRM interface
	 * specification supported by the driver HWRM implementation. A
	 * change in interface minor version is used to reflect
	 * significant backward compatible modification to HWRM
	 * interface specification. This can be due to addition or
	 * removal of functionality. HWRM interface specifications with
	 * the same major version but different minor versions are
	 * compatible.
	 */
	uint8_t hwrm_intf_upd;
	/*
	 * This field represents the update version of HWRM interface
	 * specification supported by the driver HWRM implementation.
	 * The interface update version is used to reflect minor changes
	 * or bug fixes to a released HWRM interface specification.
	 */
	uint8_t unused_0[5];
} __attribute__((packed));

/* Output	(128 bytes) */
struct hwrm_ver_get_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint8_t hwrm_intf_maj;
	/*
	 * This field represents the major version of HWRM interface
	 * specification supported by the HWRM implementation. The
	 * interface major version is intended to change only when non
	 * backward compatible changes are made to the HWRM interface
	 * specification. A HWRM implementation that is compliant with
	 * this specification shall provide value of 1 in this field.
	 */
	uint8_t hwrm_intf_min;
	/*
	 * This field represents the minor version of HWRM interface
	 * specification supported by the HWRM implementation. A change
	 * in interface minor version is used to reflect significant
	 * backward compatible modification to HWRM interface
	 * specification. This can be due to addition or removal of
	 * functionality. HWRM interface specifications with the same
	 * major version but different minor versions are compatible. A
	 * HWRM implementation that is compliant with this specification
	 * shall provide value of 2 in this field.
	 */
	uint8_t hwrm_intf_upd;
	/*
	 * This field represents the update version of HWRM interface
	 * specification supported by the HWRM implementation. The
	 * interface update version is used to reflect minor changes or
	 * bug fixes to a released HWRM interface specification. A HWRM
	 * implementation that is compliant with this specification
	 * shall provide value of 2 in this field.
	 */
	uint8_t hwrm_intf_rsvd;
	uint8_t hwrm_fw_maj;
	/*
	 * This field represents the major version of HWRM firmware. A
	 * change in firmware major version represents a major firmware
	 * release.
	 */
	uint8_t hwrm_fw_min;
	/*
	 * This field represents the minor version of HWRM firmware. A
	 * change in firmware minor version represents significant
	 * firmware functionality changes.
	 */
	uint8_t hwrm_fw_bld;
	/*
	 * This field represents the build version of HWRM firmware. A
	 * change in firmware build version represents bug fixes to a
	 * released firmware.
	 */
	uint8_t hwrm_fw_rsvd;
	/*
	 * This field is a reserved field. This field can be used to
	 * represent firmware branches or customer specific releases
	 * tied to a specific	(major,minor,update) version of the HWRM
	 * firmware.
	 */
	uint8_t mgmt_fw_maj;
	/*
	 * This field represents the major version of mgmt firmware. A
	 * change in major version represents a major release.
	 */
	uint8_t mgmt_fw_min;
	/*
	 * This field represents the minor version of mgmt firmware. A
	 * change in minor version represents significant functionality
	 * changes.
	 */
	uint8_t mgmt_fw_bld;
	/*
	 * This field represents the build version of mgmt firmware. A
	 * change in update version represents bug fixes.
	 */
	uint8_t mgmt_fw_rsvd;
	/*
	 * This field is a reserved field. This field can be used to
	 * represent firmware branches or customer specific releases
	 * tied to a specific	(major,minor,update) version
	 */
	uint8_t netctrl_fw_maj;
	/*
	 * This field represents the major version of network control
	 * firmware. A change in major version represents a major
	 * release.
	 */
	uint8_t netctrl_fw_min;
	/*
	 * This field represents the minor version of network control
	 * firmware. A change in minor version represents significant
	 * functionality changes.
	 */
	uint8_t netctrl_fw_bld;
	/*
	 * This field represents the build version of network control
	 * firmware. A change in update version represents bug fixes.
	 */
	uint8_t netctrl_fw_rsvd;
	/*
	 * This field is a reserved field. This field can be used to
	 * represent firmware branches or customer specific releases
	 * tied to a specific	(major,minor,update) version
	 */
	uint32_t dev_caps_cfg;
	/*
	 * This field is used to indicate device's capabilities and
	 * configurations.
	 */
	/*
	 * If set to 1, then secure firmware update behavior is
	 * supported. If set to 0, then secure firmware update behavior
	 * is not supported.
	 */
	#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SECURE_FW_UPD_SUPPORTED  \
		UINT32_C(0x1)
	/*
	 * If set to 1, then firmware based DCBX agent is supported. If
	 * set to 0, then firmware based DCBX agent capability is not
	 * supported on this device.
	 */
	#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_FW_DCBX_AGENT_SUPPORTED  \
		UINT32_C(0x2)
	/*
	 * If set to 1, then HWRM short command format is supported. If
	 * set to 0, then HWRM short command format is not supported.
	 */
	#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_SUPPORTED	 \
		UINT32_C(0x4)
	/*
	 * If set to 1, then HWRM short command format is required. If
	 * set to 0, then HWRM short command format is not required.
	 */
	#define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_INPUTUIRED	\
		UINT32_C(0x8)
	uint8_t roce_fw_maj;
	/*
	 * This field represents the major version of RoCE firmware. A
	 * change in major version represents a major release.
	 */
	uint8_t roce_fw_min;
	/*
	 * This field represents the minor version of RoCE firmware. A
	 * change in minor version represents significant functionality
	 * changes.
	 */
	uint8_t roce_fw_bld;
	/*
	 * This field represents the build version of RoCE firmware. A
	 * change in update version represents bug fixes.
	 */
	uint8_t roce_fw_rsvd;
	/*
	 * This field is a reserved field. This field can be used to
	 * represent firmware branches or customer specific releases
	 * tied to a specific	(major,minor,update) version
	 */
	char hwrm_fw_name[16];
	/*
	 * This field represents the name of HWRM FW	(ASCII chars with
	 * NULL at the end).
	 */
	char mgmt_fw_name[16];
	/*
	 * This field represents the name of mgmt FW	(ASCII chars with
	 * NULL at the end).
	 */
	char netctrl_fw_name[16];
	/*
	 * This field represents the name of network control firmware
	 *	(ASCII chars with NULL at the end).
	 */
	uint32_t reserved2[4];
	/*
	 * This field is reserved for future use. The responder should
	 * set it to 0. The requester should ignore this field.
	 */
	char roce_fw_name[16];
	/*
	 * This field represents the name of RoCE FW	(ASCII chars with
	 * NULL at the end).
	 */
	uint16_t chip_num;
	/* This field returns the chip number. */
	uint8_t chip_rev;
	/* This field returns the revision of chip. */
	uint8_t chip_metal;
	/* This field returns the chip metal number. */
	uint8_t chip_bond_id;
	/* This field returns the bond id of the chip. */
	uint8_t chip_platform_type;
	/*
	 * This value indicates the type of platform used for chip
	 * implementation.
	 */
	/* ASIC */
	#define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_ASIC	UINT32_C(0x0)
	/* FPGA platform of the chip. */
	#define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_FPGA	UINT32_C(0x1)
	/* Palladium platform of the chip. */
	#define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_PALLADIUM UINT32_C(0x2)
	uint16_t max_req_win_len;
	/*
	 * This field returns the maximum value of request window that
	 * is supported by the HWRM. The request window is mapped into
	 * device address space using MMIO.
	 */
	uint16_t max_resp_len;
	/* This field returns the maximum value of response buffer in bytes. */
	uint16_t def_req_timeout;
	/*
	 * This field returns the default request timeout value in
	 * milliseconds.
	 */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_func_reset */
/*
 * Description: This command resets a hardware function	(PCIe function) and
 * frees any resources used by the function. This command shall be initiated by
 * the driver after an FLR has occurred to prepare the function for re-use. This
 * command may also be initiated by a driver prior to doing it's own
 * configuration. This command puts the function into the reset state. In the
 * reset state, global and port related features of the chip are not available.
 */
/*
 * Note: This command will reset a function that has already been disabled or
 * idled. The command returns all the resources owned by the function so a new
 * driver may allocate and configure resources normally.
 */
/* Input	(24 bytes) */
struct hwrm_func_reset_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t enables;
	/* This bit must be '1' for the vf_id_valid field to be configured. */
	#define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID	UINT32_C(0x1)
	uint16_t vf_id;
	/*
	 * The ID of the VF that this PF is trying to reset. Only the
	 * parent PF shall be allowed to reset a child VF. A parent PF
	 * driver shall use this field only when a specific child VF is
	 * requested to be reset.
	 */
	uint8_t func_reset_level;
	/* This value indicates the level of a function reset. */
	/*
	 * Reset the caller function and its children
	 * VFs	(if any). If no children functions exist,
	 * then reset the caller function only.
	 */
	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL	UINT32_C(0x0)
	/* Reset the caller function only */
	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME	UINT32_C(0x1)
	/*
	 * Reset all children VFs of the caller function
	 * driver if the caller is a PF driver. It is an
	 * error to specify this level by a VF driver.
	 * It is an error to specify this level by a PF
	 * driver with no children VFs.
	 */
	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \
		UINT32_C(0x2)
	/*
	 * Reset a specific VF of the caller function
	 * driver if the caller is the parent PF driver.
	 * It is an error to specify this level by a VF
	 * driver. It is an error to specify this level
	 * by a PF driver that is not the parent of the
	 * VF that is being requested to reset.
	 */
	#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF	UINT32_C(0x3)
	uint8_t unused_0;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_func_reset_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_func_qcaps */
/*
 * Description: This command returns capabilities of a function. The input FID
 * value is used to indicate what function is being queried. This allows a
 * physical function driver to query virtual functions that are children of the
 * physical function. The output FID value is needed to configure Rings and
 * MSI-X vectors so their DMA operations appear correctly on the PCI bus.
 */
/* Input	(24 bytes) */
struct hwrm_func_qcaps_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t fid;
	/*
	 * Function ID of the function that is being queried. 0xFF...
	 *	(All Fs) if the query is for the requesting function.
	 */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(80 bytes) */
struct hwrm_func_qcaps_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint16_t fid;
	/*
	 * FID value. This value is used to identify operations on the
	 * PCI bus as belonging to a particular PCI function.
	 */
	uint16_t port_id;
	/*
	 * Port ID of port that this function is associated with. Valid
	 * only for the PF. 0xFF...	(All Fs) if this function is not
	 * associated with any port. 0xFF...	(All Fs) if this function
	 * is called from a VF.
	 */
	uint32_t flags;
	/* If 1, then Push mode is supported on this function. */
	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED UINT32_C(0x1)
	/*
	 * If 1, then the global MSI-X auto-masking is enabled for the
	 * device.
	 */
	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING	 \
		UINT32_C(0x2)
	/*
	 * If 1, then the Precision Time Protocol	(PTP) processing is
	 * supported on this function. The HWRM should enable PTP on
	 * only a single Physical Function	(PF) per port.
	 */
	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED	UINT32_C(0x4)
	/*
	 * If 1, then RDMA over Converged Ethernet	(RoCE) v1 is
	 * supported on this function.
	 */
	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED UINT32_C(0x8)
	/*
	 * If 1, then RDMA over Converged Ethernet	(RoCE) v2 is
	 * supported on this function.
	 */
	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED UINT32_C(0x10)
	/*
	 * If 1, then control and configuration of WoL magic packet are
	 * supported on this function.
	 */
	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED	\
		UINT32_C(0x20)
	/*
	 * If 1, then control and configuration of bitmap pattern packet
	 * are supported on this function.
	 */
	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED UINT32_C(0x40)
	/*
	 * If set to 1, then the control and configuration of rate limit
	 * of an allocated TX ring on the queried function is supported.
	 */
	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_RING_RL_SUPPORTED UINT32_C(0x80)
	/*
	 * If 1, then control and configuration of minimum and maximum
	 * bandwidths are supported on the queried function.
	 */
	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_BW_CFG_SUPPORTED UINT32_C(0x100)
	/*
	 * If the query is for a VF, then this flag shall be ignored. If
	 * this query is for a PF and this flag is set to 1, then the PF
	 * has the capability to set the rate limits on the TX rings of
	 * its children VFs. If this query is for a PF and this flag is
	 * set to 0, then the PF does not have the capability to set the
	 * rate limits on the TX rings of its children VFs.
	 */
	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_TX_RING_RL_SUPPORTED	 \
		UINT32_C(0x200)
	/*
	 * If the query is for a VF, then this flag shall be ignored. If
	 * this query is for a PF and this flag is set to 1, then the PF
	 * has the capability to set the minimum and/or maximum
	 * bandwidths for its children VFs. If this query is for a PF
	 * and this flag is set to 0, then the PF does not have the
	 * capability to set the minimum or maximum bandwidths for its
	 * children VFs.
	 */
	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_BW_CFG_SUPPORTED UINT32_C(0x400)
	/*
	 * Standard TX Ring mode is used for the allocation of TX ring
	 * and underlying scheduling resources that allow bandwidth
	 * reservation and limit settings on the queried function. If
	 * set to 1, then standard TX ring mode is supported on the
	 * queried function. If set to 0, then standard TX ring mode is
	 * not available on the queried function.
	 */
	#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_STD_TX_RING_MODE_SUPPORTED   \
		UINT32_C(0x800)
	uint8_t mac_address[6];
	/*
	 * This value is current MAC address configured for this
	 * function. A value of 00-00-00-00-00-00 indicates no MAC
	 * address is currently configured.
	 */
	uint16_t max_rsscos_ctx;
	/*
	 * The maximum number of RSS/COS contexts that can be allocated
	 * to the function.
	 */
	uint16_t max_cmpl_rings;
	/*
	 * The maximum number of completion rings that can be allocated
	 * to the function.
	 */
	uint16_t max_tx_rings;
	/*
	 * The maximum number of transmit rings that can be allocated to
	 * the function.
	 */
	uint16_t max_rx_rings;
	/*
	 * The maximum number of receive rings that can be allocated to
	 * the function.
	 */
	uint16_t max_l2_ctxs;
	/*
	 * The maximum number of L2 contexts that can be allocated to
	 * the function.
	 */
	uint16_t max_vnics;
	/*
	 * The maximum number of VNICs that can be allocated to the
	 * function.
	 */
	uint16_t first_vf_id;
	/*
	 * The identifier for the first VF enabled on a PF. This is
	 * valid only on the PF with SR-IOV enabled. 0xFF...	(All Fs) if
	 * this command is called on a PF with SR-IOV disabled or on a
	 * VF.
	 */
	uint16_t max_vfs;
	/*
	 * The maximum number of VFs that can be allocated to the
	 * function. This is valid only on the PF with SR-IOV enabled.
	 * 0xFF...	(All Fs) if this command is called on a PF with SR-
	 * IOV disabled or on a VF.
	 */
	uint16_t max_stat_ctx;
	/*
	 * The maximum number of statistic contexts that can be
	 * allocated to the function.
	 */
	uint32_t max_encap_records;
	/*
	 * The maximum number of Encapsulation records that can be
	 * offloaded by this function.
	 */
	uint32_t max_decap_records;
	/*
	 * The maximum number of decapsulation records that can be
	 * offloaded by this function.
	 */
	uint32_t max_tx_em_flows;
	/*
	 * The maximum number of Exact Match	(EM) flows that can be
	 * offloaded by this function on the TX side.
	 */
	uint32_t max_tx_wm_flows;
	/*
	 * The maximum number of Wildcard Match	(WM) flows that can be
	 * offloaded by this function on the TX side.
	 */
	uint32_t max_rx_em_flows;
	/*
	 * The maximum number of Exact Match	(EM) flows that can be
	 * offloaded by this function on the RX side.
	 */
	uint32_t max_rx_wm_flows;
	/*
	 * The maximum number of Wildcard Match	(WM) flows that can be
	 * offloaded by this function on the RX side.
	 */
	uint32_t max_mcast_filters;
	/*
	 * The maximum number of multicast filters that can be supported
	 * by this function on the RX side.
	 */
	uint32_t max_flow_id;
	/*
	 * The maximum value of flow_id that can be supported in
	 * completion records.
	 */
	uint32_t max_hw_ring_grps;
	/*
	 * The maximum number of HW ring groups that can be supported on
	 * this function.
	 */
	uint16_t max_sp_tx_rings;
	/*
	 * The maximum number of strict priority transmit rings that can
	 * be allocated to the function. This number indicates the
	 * maximum number of TX rings that can be assigned strict
	 * priorities out of the maximum number of TX rings that can be
	 * allocated	(max_tx_rings) to the function.
	 */
	uint8_t unused_0;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_func_qcfg */
/*
 * Description: This command returns the current configuration of a function.
 * The input FID value is used to indicate what function is being queried. This
 * allows a physical function driver to query virtual functions that are
 * children of the physical function. The output FID value is needed to
 * configure Rings and MSI-X vectors so their DMA operations appear correctly on
 * the PCI bus. This command should be called by every driver after
 * 'hwrm_func_cfg' to get the actual number of resources allocated by the HWRM.
 * The values returned by hwrm_func_qcfg are the values the driver shall use.
 * These values may be different than what was originally requested in the
 * 'hwrm_func_cfg' command.
 */
/* Input	(24 bytes) */
struct hwrm_func_qcfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t fid;
	/*
	 * Function ID of the function that is being queried. 0xFF...
	 *	(All Fs) if the query is for the requesting function.
	 */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(72 bytes) */
struct hwrm_func_qcfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint16_t fid;
	/*
	 * FID value. This value is used to identify operations on the
	 * PCI bus as belonging to a particular PCI function.
	 */
	uint16_t port_id;
	/*
	 * Port ID of port that this function is associated with.
	 * 0xFF...	(All Fs) if this function is not associated with any
	 * port.
	 */
	uint16_t vlan;
	/*
	 * This value is the current VLAN setting for this function. The
	 * value of 0 for this field indicates no priority tagging or
	 * VLAN is used. This field's format is same as 802.1Q Tag's Tag
	 * Control Information	(TCI) format that includes both Priority
	 * Code Point	(PCP) and VLAN Identifier	(VID).
	 */
	uint16_t flags;
	/*
	 * If 1, then magic packet based Out-Of-Box WoL is enabled on
	 * the port associated with this function.
	 */
	#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED	 \
		UINT32_C(0x1)
	/*
	 * If 1, then bitmap pattern based Out-Of-Box WoL packet is
	 * enabled on the port associated with this function.
	 */
	#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_BMP_ENABLED	UINT32_C(0x2)
	/*
	 * If set to 1, then FW based DCBX agent is enabled and running
	 * on the port associated with this function. If set to 0, then
	 * DCBX agent is not running in the firmware.
	 */
	#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_DCBX_AGENT_ENABLED \
		UINT32_C(0x4)
	/*
	 * Standard TX Ring mode is used for the allocation of TX ring
	 * and underlying scheduling resources that allow bandwidth
	 * reservation and limit settings on the queried function. If
	 * set to 1, then standard TX ring mode is enabled on the
	 * queried function. If set to 0, then the standard TX ring mode
	 * is disabled on the queried function. In this extended TX ring
	 * resource mode, the minimum and maximum bandwidth settings are
	 * not supported to allow the allocation of TX rings to span
	 * multiple scheduler nodes.
	 */
	#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_STD_TX_RING_MODE_ENABLED	 \
		UINT32_C(0x8)
	/*
	 * If set to 1 then FW based LLDP agent is enabled and running
	 * on the port associated with this function. If set to 0 then
	 * the LLDP agent is not running in the firmware.
	 */
	#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_LLDP_AGENT_ENABLED UINT32_C(0x10)
	/*
	 * If set to 1, then multi-host mode is active for this
	 * function. If set to 0, then multi-host mode is inactive for
	 * this function or not applicable for this device.
	 */
	#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_HOST		UINT32_C(0x20)
	uint8_t mac_address[6];
	/*
	 * This value is current MAC address configured for this
	 * function. A value of 00-00-00-00-00-00 indicates no MAC
	 * address is currently configured.
	 */
	uint16_t pci_id;
	/*
	 * This value is current PCI ID of this function. If ARI is
	 * enabled, then it is Bus Number	(8b):Function Number(8b).
	 * Otherwise, it is Bus Number	(8b):Device Number	(4b):Function
	 * Number(4b).
	 */
	uint16_t alloc_rsscos_ctx;
	/*
	 * The number of RSS/COS contexts currently allocated to the
	 * function.
	 */
	uint16_t alloc_cmpl_rings;
	/*
	 * The number of completion rings currently allocated to the
	 * function. This does not include the rings allocated to any
	 * children functions if any.
	 */
	uint16_t alloc_tx_rings;
	/*
	 * The number of transmit rings currently allocated to the
	 * function. This does not include the rings allocated to any
	 * children functions if any.
	 */
	uint16_t alloc_rx_rings;
	/*
	 * The number of receive rings currently allocated to the
	 * function. This does not include the rings allocated to any
	 * children functions if any.
	 */
	uint16_t alloc_l2_ctx;
	/* The allocated number of L2 contexts to the function. */
	uint16_t alloc_vnics;
	/* The allocated number of vnics to the function. */
	uint16_t mtu;
	/*
	 * The maximum transmission unit of the function. For rings
	 * allocated on this function, this default value is used if
	 * ring MTU is not specified.
	 */
	uint16_t mru;
	/*
	 * The maximum receive unit of the function. For vnics allocated
	 * on this function, this default value is used if vnic MRU is
	 * not specified.
	 */
	uint16_t stat_ctx_id;
	/* The statistics context assigned to a function. */
	uint8_t port_partition_type;
	/*
	 * The HWRM shall return Unknown value for this field when this
	 * command is used to query VF's configuration.
	 */
	/* Single physical function */
	#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_SPF	UINT32_C(0x0)
	/* Multiple physical functions */
	#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS	UINT32_C(0x1)
	/* Network Partitioning 1.0 */
	#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 UINT32_C(0x2)
	/* Network Partitioning 1.5 */
	#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3)
	/* Network Partitioning 2.0 */
	#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4)
	/* Unknown */
	#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN UINT32_C(0xff)
	uint8_t port_pf_cnt;
	/*
	 * This field will indicate number of physical functions on this
	 * port_partition. HWRM shall return unavail (i.e. value of 0)
	 * for this field when this command is used to query VF's
	 * configuration or from older firmware that doesn't support
	 * this field.
	 */
	/* number of PFs is not available */
	#define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL	UINT32_C(0x0)
	uint16_t dflt_vnic_id;
	/* The default VNIC ID assigned to a function that is being queried. */
	uint8_t unused_0;
	uint8_t unused_1;
	uint32_t min_bw;
	/*
	 * Minimum BW allocated for this function. The HWRM will
	 * translate this value into byte counter and time interval used
	 * for the scheduler inside the device. A value of 0 indicates
	 * the minimum bandwidth is not configured.
	 */
	/* The bandwidth value. */
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_SFT	0
	/* The granularity of the value	(bits or bytes). */
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE	UINT32_C(0x10000000)
	/* Value is in bits. */
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BITS	(UINT32_C(0x0) << 28)
	/* Value is in bytes. */
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES \
		(UINT32_C(0x1) << 28)
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_LAST \
		FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES
	/* bw_value_unit is 3 b */
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MASK	\
		UINT32_C(0xe0000000)
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_SFT	29
	/* Value is in Mb or MB	(base 10). */
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MEGA \
		(UINT32_C(0x0) << 29)
	/* Value is in Kb or KB	(base 10). */
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_KILO \
		(UINT32_C(0x2) << 29)
	/* Value is in bits or bytes. */
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_BASE \
		(UINT32_C(0x4) << 29)
	/* Value is in Gb or GB	(base 10). */
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_GIGA \
		(UINT32_C(0x6) << 29)
	/* Value is in 1/100th of a percentage of total bandwidth. */
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
		(UINT32_C(0x1) << 29)
	/* Invalid unit */
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
		(UINT32_C(0x7) << 29)
	#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \
		FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID
	uint32_t max_bw;
	/*
	 * Maximum BW allocated for this function. The HWRM will
	 * translate this value into byte counter and time interval used
	 * for the scheduler inside the device. A value of 0 indicates
	 * that the maximum bandwidth is not configured.
	 */
	/* The bandwidth value. */
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_SFT	0
	/* The granularity of the value	(bits or bytes). */
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE	UINT32_C(0x10000000)
	/* Value is in bits. */
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BITS	(UINT32_C(0x0) << 28)
	/* Value is in bytes. */
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES \
		(UINT32_C(0x1) << 28)
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_LAST \
		FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES
	/* bw_value_unit is 3 b */
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MASK	\
		UINT32_C(0xe0000000)
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_SFT	29
	/* Value is in Mb or MB	(base 10). */
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
		(UINT32_C(0x0) << 29)
	/* Value is in Kb or KB	(base 10). */
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_KILO \
		(UINT32_C(0x2) << 29)
	/* Value is in bits or bytes. */
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_BASE \
		(UINT32_C(0x4) << 29)
	/* Value is in Gb or GB	(base 10). */
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
		(UINT32_C(0x6) << 29)
	/* Value is in 1/100th of a percentage of total bandwidth. */
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
		(UINT32_C(0x1) << 29)
	/* Invalid unit */
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
		(UINT32_C(0x7) << 29)
	#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_LAST \
		FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID
	uint8_t evb_mode;
	/*
	 * This value indicates the Edge virtual bridge mode for the
	 * domain that this function belongs to.
	 */
	/* No Edge Virtual Bridging	(EVB) */
	#define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB	UINT32_C(0x0)
	/* Virtual Ethernet Bridge	(VEB) */
	#define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB	UINT32_C(0x1)
	/* Virtual Ethernet Port Aggregator	(VEPA) */
	#define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA	UINT32_C(0x2)
	uint8_t unused_2;
	uint16_t alloc_vfs;
	/*
	 * The number of VFs that are allocated to the function. This is
	 * valid only on the PF with SR-IOV enabled. 0xFF...	(All Fs) if
	 * this command is called on a PF with SR-IOV disabled or on a
	 * VF.
	 */
	uint32_t alloc_mcast_filters;
	/*
	 * The number of allocated multicast filters for this function
	 * on the RX side.
	 */
	uint32_t alloc_hw_ring_grps;
	/* The number of allocated HW ring groups for this function. */
	uint16_t alloc_sp_tx_rings;
	/*
	 * The number of strict priority transmit rings out of currently
	 * allocated TX rings to the function	(alloc_tx_rings).
	 */
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_func_vlan_qcfg */
/*
 * Description: This command should be called by PF driver to get the current
 * C-TAG, S-TAG and correcponsing PCP and TPID values configured for the
 * function.
 */
/* Input (24 bytes) */
struct hwrm_func_vlan_qcfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t fid;
	/*
	 * Function ID of the function that is being configured. If set
	 * to 0xFF... (All Fs), then the configuration is for the
	 * requesting function.
	 */
	uint16_t unused_0[3];
};

/* Output (40 bytes) */
struct hwrm_func_vlan_qcfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
	uint16_t stag_vid;
	/* S-TAG VLAN identifier configured for the function. */
	uint8_t stag_pcp;
	/* S-TAG PCP value configured for the function. */
	uint8_t unused_4;
	uint16_t stag_tpid;
	/*
	 * S-TAG TPID value configured for the function. This field is
	 * specified in network byte order.
	 */
	uint16_t ctag_vid;
	/* C-TAG VLAN identifier configured for the function. */
	uint8_t ctag_pcp;
	/* C-TAG PCP value configured for the function. */
	uint8_t unused_5;
	uint16_t ctag_tpid;
	/*
	 * C-TAG TPID value configured for the function. This field is
	 * specified in network byte order.
	 */
	uint32_t rsvd2;
	/* Future use. */
	uint32_t rsvd3;
	/* Future use. */
	uint32_t unused_6;
};

/* hwrm_func_vlan_cfg */
/*
 * Description: This command allows PF driver to configure C-TAG, S-TAG and
 * corresponding PCP and TPID values for a function.
 */
/* Input (48 bytes) */
struct hwrm_func_vlan_cfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t fid;
	/*
	 * Function ID of the function that is being configured. If set
	 * to 0xFF... (All Fs), then the configuration is for the
	 * requesting function.
	 */
	uint8_t unused_0;
	uint8_t unused_1;
	uint32_t enables;
	/* This bit must be '1' for the stag_vid field to be configured. */
	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_VID	UINT32_C(0x1)
	/* This bit must be '1' for the ctag_vid field to be configured. */
	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_VID	UINT32_C(0x2)
	/* This bit must be '1' for the stag_pcp field to be configured. */
	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_PCP	UINT32_C(0x4)
	/* This bit must be '1' for the ctag_pcp field to be configured. */
	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_PCP	UINT32_C(0x8)
	/* This bit must be '1' for the stag_tpid field to be configured. */
	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_TPID	UINT32_C(0x10)
	/* This bit must be '1' for the ctag_tpid field to be configured. */
	#define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_TPID	UINT32_C(0x20)
	uint16_t stag_vid;
	/* S-TAG VLAN identifier configured for the function. */
	uint8_t stag_pcp;
	/* S-TAG PCP value configured for the function. */
	uint8_t unused_2;
	uint16_t stag_tpid;
	/*
	 * S-TAG TPID value configured for the function. This field is
	 * specified in network byte order.
	 */
	uint16_t ctag_vid;
	/* C-TAG VLAN identifier configured for the function. */
	uint8_t ctag_pcp;
	/* C-TAG PCP value configured for the function. */
	uint8_t unused_3;
	uint16_t ctag_tpid;
	/*
	 * C-TAG TPID value configured for the function. This field is
	 * specified in network byte order.
	 */
	uint32_t rsvd1;
	/* Future use. */
	uint32_t rsvd2;
	/* Future use. */
	uint32_t unused_4;
};

/* Output (16 bytes) */
struct hwrm_func_vlan_cfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
};

/* hwrm_func_cfg */
/*
 * Description: This command allows configuration of a PF by the corresponding
 * PF driver. This command also allows configuration of a child VF by its parent
 * PF driver. The input FID value is used to indicate what function is being
 * configured. This allows a PF driver to configure the PF owned by itself or a
 * virtual function that is a child of the PF. This command allows to reserve
 * resources for a VF by its parent PF. To reverse the process, the command
 * should be called with all enables flags cleared for resources. This will free
 * allocated resources for the VF and return them to the resource pool. If this
 * command is requested by a VF driver to configure or reserve resources, then
 * the HWRM shall fail this command. If default MAC address and/or VLAN are
 * provided in this command, then the HWRM shall set up appropriate MAC/VLAN
 * filters for the function that is being configured. If source properties
 * checks are enabled and default MAC address and/or IP address are provided in
 * this command, then the HWRM shall set appropriate source property checks
 * based on provided MAC and/or IP addresses. The parent PF driver should not
 * set MTU/MRU for a VF using this command. This is to allow MTU/MRU setting by
 * the VF driver. If the MTU or MRU for a VF is set by the PF driver, then the
 * HWRM should ignore it. A function's MTU/MRU should be set prior to allocating
 * RX VNICs or TX rings. A PF driver calls hwrm_func_cfg to allocate resources
 * for itself or its children VFs. All function drivers shall call hwrm_func_cfg
 * to reserve resources. A request to hwrm_func_cfg may not be fully granted;
 * that is, a request for resources may be larger than what can be supported by
 * the device and the HWRM will allocate the best set of resources available,
 * but that may be less than requested. If all the amounts requested could not
 * be fulfilled, the HWRM shall allocate what it could and return a status code
 * of success. A function driver should call hwrm_func_qcfg immediately after
 * hwrm_func_cfg to determine what resources were assigned to the configured
 * function. A call by a PF driver to hwrm_func_cfg to allocate resources for
 * itself shall only allocate resources for the PF driver to use, not for its
 * children VFs. Likewise, a call to hwrm_func_qcfg shall return the resources
 * available for the PF driver to use, not what is available to its children
 * VFs.
 */
/* Input	(88 bytes) */
struct hwrm_func_cfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t fid;
	/*
	 * Function ID of the function that is being configured. If set
	 * to 0xFF...	(All Fs), then the the configuration is for the
	 * requesting function.
	 */
	uint8_t unused_0;
	uint8_t unused_1;
	uint32_t flags;
	/*
	 * When this bit is '1', the function is disabled with source
	 * MAC address check. This is an anti-spoofing check. If this
	 * flag is set, then the function shall be configured to
	 * disallow transmission of frames with the source MAC address
	 * that is configured for this function.
	 */
	#define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE	 \
		UINT32_C(0x1)
	/*
	 * When this bit is '1', the function is enabled with source MAC
	 * address check. This is an anti-spoofing check. If this flag
	 * is set, then the function shall be configured to allow
	 * transmission of frames with the source MAC address that is
	 * configured for this function.
	 */
	#define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE	\
		UINT32_C(0x2)
	/* reserved */
	#define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_MASK	UINT32_C(0x1fc)
	#define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_SFT	2
	/*
	 * Standard TX Ring mode is used for the allocation of TX ring
	 * and underlying scheduling resources that allow bandwidth
	 * reservation and limit settings on the queried function. If
	 * set to 1, then standard TX ring mode is requested to be
	 * enabled on the function being configured.
	 */
	#define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE	\
		UINT32_C(0x200)
	/*
	 * Standard TX Ring mode is used for the allocation of TX ring
	 * and underlying scheduling resources that allow bandwidth
	 * reservation and limit settings on the queried function. If
	 * set to 1, then the standard TX ring mode is requested to be
	 * disabled on the function being configured. In this extended
	 * TX ring resource mode, the minimum and maximum bandwidth
	 * settings are not supported to allow the allocation of TX
	 * rings to span multiple scheduler nodes.
	 */
	#define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_DISABLE	\
		UINT32_C(0x400)
	/*
	 * If this bit is set, virtual mac address configured in this
	 * command will be persistent over warm boot.
	 */
	#define HWRM_FUNC_CFG_INPUT_FLAGS_VIRT_MAC_PERSIST	UINT32_C(0x800)
	/*
	 * This bit only applies to the VF. If this bit is set, the
	 * statistic context counters will not be cleared when the
	 * statistic context is freed or a function reset is called on
	 * VF. This bit will be cleared when the PF is unloaded or a
	 * function reset is called on the PF.
	 */
	#define HWRM_FUNC_CFG_INPUT_FLAGS_NO_AUTOCLEAR_STATISTIC	\
		UINT32_C(0x1000)
	uint32_t enables;
	/* This bit must be '1' for the mtu field to be configured. */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_MTU	UINT32_C(0x1)
	/* This bit must be '1' for the mru field to be configured. */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_MRU	UINT32_C(0x2)
	/*
	 * This bit must be '1' for the num_rsscos_ctxs field to be
	 * configured.
	 */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS	UINT32_C(0x4)
	/*
	 * This bit must be '1' for the num_cmpl_rings field to be
	 * configured.
	 */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS	UINT32_C(0x8)
	/* This bit must be '1' for the num_tx_rings field to be configured. */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS	UINT32_C(0x10)
	/* This bit must be '1' for the num_rx_rings field to be configured. */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS	UINT32_C(0x20)
	/* This bit must be '1' for the num_l2_ctxs field to be configured. */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS	UINT32_C(0x40)
	/* This bit must be '1' for the num_vnics field to be configured. */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS	UINT32_C(0x80)
	/*
	 * This bit must be '1' for the num_stat_ctxs field to be
	 * configured.
	 */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS	UINT32_C(0x100)
	/*
	 * This bit must be '1' for the dflt_mac_addr field to be
	 * configured.
	 */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR	UINT32_C(0x200)
	/* This bit must be '1' for the dflt_vlan field to be configured. */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN	UINT32_C(0x400)
	/* This bit must be '1' for the dflt_ip_addr field to be configured. */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_IP_ADDR	UINT32_C(0x800)
	/* This bit must be '1' for the min_bw field to be configured. */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_MIN_BW	UINT32_C(0x1000)
	/* This bit must be '1' for the max_bw field to be configured. */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW	UINT32_C(0x2000)
	/*
	 * This bit must be '1' for the async_event_cr field to be
	 * configured.
	 */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR	UINT32_C(0x4000)
	/*
	 * This bit must be '1' for the vlan_antispoof_mode field to be
	 * configured.
	 */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_VLAN_ANTISPOOF_MODE	UINT32_C(0x8000)
	/*
	 * This bit must be '1' for the allowed_vlan_pris field to be
	 * configured.
	 */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_ALLOWED_VLAN_PRIS UINT32_C(0x10000)
	/* This bit must be '1' for the evb_mode field to be configured. */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE	UINT32_C(0x20000)
	/*
	 * This bit must be '1' for the num_mcast_filters field to be
	 * configured.
	 */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MCAST_FILTERS UINT32_C(0x40000)
	/*
	 * This bit must be '1' for the num_hw_ring_grps field to be
	 * configured.
	 */
	#define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS UINT32_C(0x80000)
	uint16_t mtu;
	/*
	 * The maximum transmission unit of the function. The HWRM
	 * should make sure that the mtu of the function does not exceed
	 * the mtu of the physical port that this function is associated
	 * with. In addition to configuring mtu per function, it is
	 * possible to configure mtu per transmit ring. By default, the
	 * mtu of each transmit ring associated with a function is equal
	 * to the mtu of the function. The HWRM should make sure that
	 * the mtu of each transmit ring that is assigned to a function
	 * has a valid mtu.
	 */
	uint16_t mru;
	/*
	 * The maximum receive unit of the function. The HWRM should
	 * make sure that the mru of the function does not exceed the
	 * mru of the physical port that this function is associated
	 * with. In addition to configuring mru per function, it is
	 * possible to configure mru per vnic. By default, the mru of
	 * each vnic associated with a function is equal to the mru of
	 * the function. The HWRM should make sure that the mru of each
	 * vnic that is assigned to a function has a valid mru.
	 */
	uint16_t num_rsscos_ctxs;
	/* The number of RSS/COS contexts requested for the function. */
	uint16_t num_cmpl_rings;
	/*
	 * The number of completion rings requested for the function.
	 * This does not include the rings allocated to any children
	 * functions if any.
	 */
	uint16_t num_tx_rings;
	/*
	 * The number of transmit rings requested for the function. This
	 * does not include the rings allocated to any children
	 * functions if any.
	 */
	uint16_t num_rx_rings;
	/*
	 * The number of receive rings requested for the function. This
	 * does not include the rings allocated to any children
	 * functions if any.
	 */
	uint16_t num_l2_ctxs;
	/* The requested number of L2 contexts for the function. */
	uint16_t num_vnics;
	/* The requested number of vnics for the function. */
	uint16_t num_stat_ctxs;
	/* The requested number of statistic contexts for the function. */
	uint16_t num_hw_ring_grps;
	/*
	 * The number of HW ring groups that should be reserved for this
	 * function.
	 */
	uint8_t dflt_mac_addr[6];
	/* The default MAC address for the function being configured. */
	uint16_t dflt_vlan;
	/*
	 * The default VLAN for the function being configured. This
	 * field's format is same as 802.1Q Tag's Tag Control
	 * Information	(TCI) format that includes both Priority Code
	 * Point	(PCP) and VLAN Identifier	(VID).
	 */
	uint32_t dflt_ip_addr[4];
	/*
	 * The default IP address for the function being configured.
	 * This address is only used in enabling source property check.
	 */
	uint32_t min_bw;
	/*
	 * Minimum BW allocated for this function. The HWRM will
	 * translate this value into byte counter and time interval used
	 * for the scheduler inside the device.
	 */
	/* The bandwidth value. */
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_SFT	0
	/* The granularity of the value	(bits or bytes). */
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE	UINT32_C(0x10000000)
	/* Value is in bits. */
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BITS	(UINT32_C(0x0) << 28)
	/* Value is in bytes. */
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES	(UINT32_C(0x1) << 28)
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_LAST \
		FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES
	/* bw_value_unit is 3 b */
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MASK	 \
		UINT32_C(0xe0000000)
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_SFT	29
	/* Value is in Mb or MB	(base 10). */
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MEGA \
		(UINT32_C(0x0) << 29)
	/* Value is in Kb or KB	(base 10). */
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_KILO \
		(UINT32_C(0x2) << 29)
	/* Value is in bits or bytes. */
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_BASE \
		(UINT32_C(0x4) << 29)
	/* Value is in Gb or GB	(base 10). */
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_GIGA \
		(UINT32_C(0x6) << 29)
	/* Value is in 1/100th of a percentage of total bandwidth. */
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
		(UINT32_C(0x1) << 29)
	/* Invalid unit */
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
		(UINT32_C(0x7) << 29)
	#define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \
		FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID
	uint32_t max_bw;
	/*
	 * Maximum BW allocated for this function. The HWRM will
	 * translate this value into byte counter and time interval used
	 * for the scheduler inside the device.
	 */
	/* The bandwidth value. */
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_MASK \
		UINT32_C(0xfffffff)
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_SFT	0
	/* The granularity of the value	(bits or bytes). */
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE	UINT32_C(0x10000000)
	/* Value is in bits. */
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BITS	(UINT32_C(0x0) << 28)
	/* Value is in bytes. */
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES	(UINT32_C(0x1) << 28)
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_LAST \
		FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES
	/* bw_value_unit is 3 b */
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MASK	 \
		UINT32_C(0xe0000000)
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_SFT	29
	/* Value is in Mb or MB	(base 10). */
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA	\
		(UINT32_C(0x0) << 29)
	/* Value is in Kb or KB	(base 10). */
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_KILO	\
		(UINT32_C(0x2) << 29)
	/* Value is in bits or bytes. */
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
		(UINT32_C(0x4) << 29)
	/* Value is in Gb or GB	(base 10). */
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
		(UINT32_C(0x6) << 29)
	/* Value is in 1/100th of a percentage of total bandwidth. */
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
		(UINT32_C(0x1) << 29)
	/* Invalid unit */
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
		(UINT32_C(0x7) << 29)
	#define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
		FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
	uint16_t async_event_cr;
	/*
	 * ID of the target completion ring for receiving asynchronous
	 * event completions. If this field is not valid, then the HWRM
	 * shall use the default completion ring of the function that is
	 * being configured as the target completion ring for providing
	 * any asynchronous event completions for that function. If this
	 * field is valid, then the HWRM shall use the completion ring
	 * identified by this ID as the target completion ring for
	 * providing any asynchronous event completions for the function
	 * that is being configured.
	 */
	uint8_t vlan_antispoof_mode;
	/* VLAN Anti-spoofing mode. */
	/* No VLAN anti-spoofing checks are enabled */
	#define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_NOCHECK	UINT32_C(0x0)
	/* Validate VLAN against the configured VLAN(s) */
	#define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_VALIDATE_VLAN \
		UINT32_C(0x1)
	/* Insert VLAN if it does not exist, otherwise discard */
	#define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_IF_VLANDNE \
		UINT32_C(0x2)
	/*
	 * Insert VLAN if it does not exist, override
	 * VLAN if it exists
	 */
	#define \
	HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN \
		UINT32_C(0x3)
	uint8_t allowed_vlan_pris;
	/*
	 * This bit field defines VLAN PRIs that are allowed on this
	 * function. If nth bit is set, then VLAN PRI n is allowed on
	 * this function.
	 */
	uint8_t evb_mode;
	/*
	 * The HWRM shall allow a PF driver to change EVB mode for the
	 * partition it belongs to. The HWRM shall not allow a VF driver
	 * to change the EVB mode. The HWRM shall take into account the
	 * switching of EVB mode from one to another and reconfigure
	 * hardware resources as appropriately. The switching from VEB
	 * to VEPA mode requires the disabling of the loopback traffic.
	 * Additionally, source knock outs are handled differently in
	 * VEB and VEPA modes.
	 */
	/* No Edge Virtual Bridging	(EVB) */
	#define HWRM_FUNC_CFG_INPUT_EVB_MODE_NO_EVB	UINT32_C(0x0)
	/* Virtual Ethernet Bridge	(VEB) */
	#define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEB	UINT32_C(0x1)
	/* Virtual Ethernet Port Aggregator	(VEPA) */
	#define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA	UINT32_C(0x2)
	uint8_t unused_2;
	uint16_t num_mcast_filters;
	/*
	 * The number of multicast filters that should be reserved for
	 * this function on the RX side.
	 */
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_func_cfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_func_qstats */
/*
 * Description: This command returns statistics of a function. The input FID
 * value is used to indicate what function is being queried. This allows a
 * physical function driver to query virtual functions that are children of the
 * physical function. The HWRM shall return any unsupported counter with a value
 * of 0xFFFFFFFF for 32-bit counters and 0xFFFFFFFFFFFFFFFF for 64-bit counters.
 */
/* Input	(24 bytes) */
struct hwrm_func_qstats_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t fid;
	/*
	 * Function ID of the function that is being queried. 0xFF...
	 *	(All Fs) if the query is for the requesting function.
	 */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(176 bytes) */
struct hwrm_func_qstats_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint64_t tx_ucast_pkts;
	/* Number of transmitted unicast packets on the function. */
	uint64_t tx_mcast_pkts;
	/* Number of transmitted multicast packets on the function. */
	uint64_t tx_bcast_pkts;
	/* Number of transmitted broadcast packets on the function. */
	uint64_t tx_err_pkts;
	/*
	 * Number of transmitted packets that were discarded due to
	 * internal NIC resource problems. For transmit, this can only
	 * happen if TMP is configured to allow dropping in HOL blocking
	 * conditions, which is not a normal configuration.
	 */
	uint64_t tx_drop_pkts;
	/*
	 * Number of dropped packets on transmit path on the function.
	 * These are packets that have been marked for drop by the TE
	 * CFA block or are packets that exceeded the transmit MTU limit
	 * for the function.
	 */
	uint64_t tx_ucast_bytes;
	/* Number of transmitted bytes for unicast traffic on the function. */
	uint64_t tx_mcast_bytes;
	/*
	 * Number of transmitted bytes for multicast traffic on the
	 * function.
	 */
	uint64_t tx_bcast_bytes;
	/*
	 * Number of transmitted bytes for broadcast traffic on the
	 * function.
	 */
	uint64_t rx_ucast_pkts;
	/* Number of received unicast packets on the function. */
	uint64_t rx_mcast_pkts;
	/* Number of received multicast packets on the function. */
	uint64_t rx_bcast_pkts;
	/* Number of received broadcast packets on the function. */
	uint64_t rx_err_pkts;
	/*
	 * Number of received packets that were discarded on the
	 * function due to resource limitations. This can happen for 3
	 * reasons. # The BD used for the packet has a bad format. #
	 * There were no BDs available in the ring for the packet. #
	 * There were no BDs available on-chip for the packet.
	 */
	uint64_t rx_drop_pkts;
	/*
	 * Number of dropped packets on received path on the function.
	 * These are packets that have been marked for drop by the RE
	 * CFA.
	 */
	uint64_t rx_ucast_bytes;
	/* Number of received bytes for unicast traffic on the function. */
	uint64_t rx_mcast_bytes;
	/* Number of received bytes for multicast traffic on the function. */
	uint64_t rx_bcast_bytes;
	/* Number of received bytes for broadcast traffic on the function. */
	uint64_t rx_agg_pkts;
	/* Number of aggregated unicast packets on the function. */
	uint64_t rx_agg_bytes;
	/* Number of aggregated unicast bytes on the function. */
	uint64_t rx_agg_events;
	/* Number of aggregation events on the function. */
	uint64_t rx_agg_aborts;
	/* Number of aborted aggregations on the function. */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_func_clr_stats */
/*
 * Description: This command clears statistics of a function. The input FID
 * value is used to indicate what function's statistics is being cleared. This
 * allows a physical function driver to clear statistics of virtual functions
 * that are children of the physical function.
 */
/* Input	(24 bytes) */
struct hwrm_func_clr_stats_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t fid;
	/*
	 * Function ID of the function. 0xFF...	(All Fs) if the query is
	 * for the requesting function.
	 */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_func_clr_stats_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_func_vf_vnic_ids_query */
/* Description: This command is used to query vf vnic ids. */
/* Input	(32 bytes) */
struct hwrm_func_vf_vnic_ids_query_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t vf_id;
	/*
	 * This value is used to identify a Virtual Function	(VF). The
	 * scope of VF ID is local within a PF.
	 */
	uint8_t unused_0;
	uint8_t unused_1;
	uint32_t max_vnic_id_cnt;
	/* Max number of vnic ids in vnic id table */
	uint64_t vnic_id_tbl_addr;
	/* This is the address for VF VNIC ID table */
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_func_vf_vnic_ids_query_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t vnic_id_cnt;
	/*
	 * Actual number of vnic ids Each VNIC ID is written as a 32-bit
	 * number.
	 */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_func_drv_rgtr */
/*
 * Description: This command is used by the function driver to register its
 * information with the HWRM. A function driver shall implement this command. A
 * function driver shall use this command during the driver initialization right
 * after the HWRM version discovery and default ring resources allocation.
 */
/* Input	(80 bytes) */
struct hwrm_func_drv_rgtr_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t flags;
	/*
	 * When this bit is '1', the function driver is requesting all
	 * requests from its children VF drivers to be forwarded to
	 * itself. This flag can only be set by the PF driver. If a VF
	 * driver sets this flag, it should be ignored by the HWRM.
	 */
	#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE	UINT32_C(0x1)
	/*
	 * When this bit is '1', the function is requesting none of the
	 * requests from its children VF drivers to be forwarded to
	 * itself. This flag can only be set by the PF driver. If a VF
	 * driver sets this flag, it should be ignored by the HWRM.
	 */
	#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE	UINT32_C(0x2)
	uint32_t enables;
	/* This bit must be '1' for the os_type field to be configured. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE	UINT32_C(0x1)
	/* This bit must be '1' for the ver field to be configured. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER	UINT32_C(0x2)
	/* This bit must be '1' for the timestamp field to be configured. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP	UINT32_C(0x4)
	/* This bit must be '1' for the vf_req_fwd field to be configured. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_INPUT_FWD	UINT32_C(0x8)
	/*
	 * This bit must be '1' for the async_event_fwd field to be
	 * configured.
	 */
	#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD UINT32_C(0x10)
	uint16_t os_type;
	/*
	 * This value indicates the type of OS. The values are based on
	 * CIM_OperatingSystem.mof file as published by the DMTF.
	 */
	/* Unknown */
	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN	UINT32_C(0x0)
	/* Other OS not listed below. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER	UINT32_C(0x1)
	/* MSDOS OS. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS	UINT32_C(0xe)
	/* Windows OS. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS	UINT32_C(0x12)
	/* Solaris OS. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS	UINT32_C(0x1d)
	/* Linux OS. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX	UINT32_C(0x24)
	/* FreeBSD OS. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD	UINT32_C(0x2a)
	/* VMware ESXi OS. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI	UINT32_C(0x68)
	/* Microsoft Windows 8 64-bit OS. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864	UINT32_C(0x73)
	/* Microsoft Windows Server 2012 R2 OS. */
	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2	UINT32_C(0x74)
	uint8_t ver_maj;
	/* This is the major version of the driver. */
	uint8_t ver_min;
	/* This is the minor version of the driver. */
	uint8_t ver_upd;
	/* This is the update version of the driver. */
	uint8_t unused_0;
	uint16_t unused_1;
	uint32_t timestamp;
	/*
	 * This is a 32-bit timestamp provided by the driver for keep
	 * alive. The timestamp is in multiples of 1ms.
	 */
	uint32_t unused_2;
	uint32_t vf_req_fwd[8];
	/*
	 * This is a 256-bit bit mask provided by the PF driver for
	 * letting the HWRM know what commands issued by the VF driver
	 * to the HWRM should be forwarded to the PF driver. Nth bit
	 * refers to the Nth req_type. Setting Nth bit to 1 indicates
	 * that requests from the VF driver with req_type equal to N
	 * shall be forwarded to the parent PF driver. This field is not
	 * valid for the VF driver.
	 */
	uint32_t async_event_fwd[8];
	/*
	 * This is a 256-bit bit mask provided by the function driver
	 *	(PF or VF driver) to indicate the list of asynchronous event
	 * completions to be forwarded. Nth bit refers to the Nth
	 * event_id. Setting Nth bit to 1 by the function driver shall
	 * result in the HWRM forwarding asynchronous event completion
	 * with event_id equal to N. If all bits are set to 0	(value of
	 * 0), then the HWRM shall not forward any asynchronous event
	 * completion to this function driver.
	 */
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_func_drv_rgtr_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_func_drv_unrgtr */
/*
 * Description: This command is used by the function driver to un register with
 * the HWRM. A function driver shall implement this command. A function driver
 * shall use this command during the driver unloading.
 */
/* Input	(24 bytes) */
struct hwrm_func_drv_unrgtr_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t flags;
	/*
	 * When this bit is '1', the function driver is notifying the
	 * HWRM to prepare for the shutdown.
	 */
	#define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN	\
		UINT32_C(0x1)
	uint32_t unused_0;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_func_drv_unrgtr_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_func_buf_rgtr */
/*
 * Description: This command is used by the PF driver to register buffers used
 * in the PF-VF communication with the HWRM. The PF driver uses this command to
 * register buffers for each PF-VF channel. A parent PF may issue this command
 * per child VF. If VF ID is not valid, then this command is used to register
 * buffers for all children VFs of the PF.
 */
/* Input	(128 bytes) */
struct hwrm_func_buf_rgtr_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t enables;
	/* This bit must be '1' for the vf_id field to be configured. */
	#define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_VF_ID	UINT32_C(0x1)
	/* This bit must be '1' for the err_buf_addr field to be configured. */
	#define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_ERR_BUF_ADDR	UINT32_C(0x2)
	uint16_t vf_id;
	/*
	 * This value is used to identify a Virtual Function	(VF). The
	 * scope of VF ID is local within a PF.
	 */
	uint16_t req_buf_num_pages;
	/*
	 * This field represents the number of pages used for request
	 * buffer(s).
	 */
	uint16_t req_buf_page_size;
	/* This field represents the page size used for request buffer(s). */
	/* 16 bytes */
	#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_16B UINT32_C(0x4)
	/* 4 Kbytes */
	#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_4K	UINT32_C(0xc)
	/* 8 Kbytes */
	#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_8K	UINT32_C(0xd)
	/* 64 Kbytes */
	#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_64K UINT32_C(0x10)
	/* 2 Mbytes */
	#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_2M	UINT32_C(0x15)
	/* 4 Mbytes */
	#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_4M	UINT32_C(0x16)
	/* 1 Gbytes */
	#define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_1G	UINT32_C(0x1e)
	uint16_t req_buf_len;
	/* The length of the request buffer per VF in bytes. */
	uint16_t resp_buf_len;
	/* The length of the response buffer in bytes. */
	uint8_t unused_0;
	uint8_t unused_1;
	uint64_t req_buf_page_addr[10];
	/* This field represents the page address of req buffer. */
	uint64_t error_buf_addr;
	/*
	 * This field is used to receive the error reporting from the
	 * chipset. Only applicable for PFs.
	 */
	uint64_t resp_buf_addr;
	/* This field is used to receive the response forwarded by the HWRM. */
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_func_buf_rgtr_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_func_buf_unrgtr */
/*
 * Description: This command is used by the PF driver to unregister buffers used
 * in the PF-VF communication with the HWRM. The PF driver uses this command to
 * unregister buffers for PF-VF communication. A parent PF may issue this
 * command to unregister buffers for communication between the PF and a specific
 * VF. If the VF ID is not valid, then this command is used to unregister
 * buffers used for communications with all children VFs of the PF.
 */
/* Input	(24 bytes) */
struct hwrm_func_buf_unrgtr_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t enables;
	/* This bit must be '1' for the vf_id field to be configured. */
	#define HWRM_FUNC_BUF_UNRGTR_INPUT_ENABLES_VF_ID	UINT32_C(0x1)
	uint16_t vf_id;
	/*
	 * This value is used to identify a Virtual Function	(VF). The
	 * scope of VF ID is local within a PF.
	 */
	uint16_t unused_0;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_func_buf_unrgtr_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_func_vf_cfg */
/*
 * Description: This command allows configuration of a VF by its driver. If this
 * function is called by a PF driver, then the HWRM shall fail this command. If
 * guest VLAN and/or MAC address are provided in this command, then the HWRM
 * shall set up appropriate MAC/VLAN filters for the VF that is being
 * configured. A VF driver should set VF MTU/MRU using this command prior to
 * allocating RX VNICs or TX rings for the corresponding VF.
 */
/* Input (32 bytes) */

struct hwrm_func_vf_cfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format for the
	 * rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request will be
	 * optionally completed on. If the value is -1, then no CR completion
	 * will be generated. Any other value must be a valid CR ring_id value
	 * for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
	 * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written when the
	 * request is complete. This area must be 16B aligned and must be
	 * cleared to zero before the request is made.
	 */
	uint32_t enables;
	/* This bit must be '1' for the mtu field to be configured. */
	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU                 UINT32_C(0x1)
	/* This bit must be '1' for the guest_vlan field to be configured. */
	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN          UINT32_C(0x2)
	/*
	 * This bit must be '1' for the async_event_cr field to be configured.
	 */
	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR      UINT32_C(0x4)
	/* This bit must be '1' for the dflt_mac_addr field to be configured. */
	#define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR       UINT32_C(0x8)
	uint16_t mtu;
	/*
	 * The maximum transmission unit requested on the function. The HWRM
	 * should make sure that the mtu of the function does not exceed the mtu
	 * of the physical port that this function is associated with. In
	 * addition to requesting mtu per function, it is possible to configure
	 * mtu per transmit ring. By default, the mtu of each transmit ring
	 * associated with a function is equal to the mtu of the function. The
	 * HWRM should make sure that the mtu of each transmit ring that is
	 * assigned to a function has a valid mtu.
	 */
	uint16_t guest_vlan;
	/*
	 * The guest VLAN for the function being configured. This field's format
	 * is same as 802.1Q Tag's Tag Control Information (TCI) format that
	 * includes both Priority Code Point (PCP) and VLAN Identifier (VID).
	 */
	uint16_t async_event_cr;
	/*
	 * ID of the target completion ring for receiving asynchronous event
	 * completions. If this field is not valid, then the HWRM shall use the
	 * default completion ring of the function that is being configured as
	 * the target completion ring for providing any asynchronous event
	 * completions for that function. If this field is valid, then the HWRM
	 * shall use the completion ring identified by this ID as the target
	 * completion ring for providing any asynchronous event completions for
	 * the function that is being configured.
	 */
	uint8_t dflt_mac_addr[6];
	/*
	 * This value is the current MAC address requested by the VF driver to
	 * be configured on this VF. A value of 00-00-00-00-00-00 indicates no
	 * MAC address configuration is requested by the VF driver. The parent
	 * PF driver may reject or overwrite this MAC address.
	 */
} __attribute__((packed));

/* Output (16 bytes) */

struct hwrm_func_vf_cfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in parameters,
	 * and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the output is
	 * completely written to RAM. This field should be read as '1' to
	 * indicate that the output has been completely written. When writing a
	 * command completion or response to an internal processor, the order of
	 * writes has to be such that this field is written last.
	 */
} __attribute__((packed));

/* hwrm_port_phy_cfg */
/*
 * Description: This command configures the PHY device for the port. It allows
 * setting of the most generic settings for the PHY. The HWRM shall complete
 * this command as soon as PHY settings are configured. They may not be applied
 * when the command response is provided. A VF driver shall not be allowed to
 * configure PHY using this command. In a network partition mode, a PF driver
 * shall not be allowed to configure PHY using this command.
 */
/* Input	(56 bytes) */
struct hwrm_port_phy_cfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t flags;
	/*
	 * When this bit is set to '1', the PHY for the port shall be
	 * reset. # If this bit is set to 1, then the HWRM shall reset
	 * the PHY after applying PHY configuration changes specified in
	 * this command. # In order to guarantee that PHY configuration
	 * changes specified in this command take effect, the HWRM
	 * client should set this flag to 1. # If this bit is not set to
	 * 1, then the HWRM may reset the PHY depending on the current
	 * PHY configuration and settings specified in this command.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY	UINT32_C(0x1)
	/* deprecated bit. Do not use!!! */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_DEPRECATED	UINT32_C(0x2)
	/*
	 * When this bit is set to '1', the link shall be forced to the
	 * force_link_speed value. When this bit is set to '1', the HWRM
	 * client should not enable any of the auto negotiation related
	 * fields represented by auto_XXX fields in this command. When
	 * this bit is set to '1' and the HWRM client has enabled a
	 * auto_XXX field in this command, then the HWRM shall ignore
	 * the enabled auto_XXX field. When this bit is set to zero, the
	 * link shall be allowed to autoneg.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE	UINT32_C(0x4)
	/*
	 * When this bit is set to '1', the auto-negotiation process
	 * shall be restarted on the link.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG	UINT32_C(0x8)
	/*
	 * When this bit is set to '1', Energy Efficient Ethernet	(EEE)
	 * is requested to be enabled on this link. If EEE is not
	 * supported on this port, then this flag shall be ignored by
	 * the HWRM.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_ENABLE	UINT32_C(0x10)
	/*
	 * When this bit is set to '1', Energy Efficient Ethernet	(EEE)
	 * is requested to be disabled on this link. If EEE is not
	 * supported on this port, then this flag shall be ignored by
	 * the HWRM.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_DISABLE	UINT32_C(0x20)
	/*
	 * When this bit is set to '1' and EEE is enabled on this link,
	 * then TX LPI is requested to be enabled on the link. If EEE is
	 * not supported on this port, then this flag shall be ignored
	 * by the HWRM. If EEE is disabled on this port, then this flag
	 * shall be ignored by the HWRM.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_ENABLE	UINT32_C(0x40)
	/*
	 * When this bit is set to '1' and EEE is enabled on this link,
	 * then TX LPI is requested to be disabled on the link. If EEE
	 * is not supported on this port, then this flag shall be
	 * ignored by the HWRM. If EEE is disabled on this port, then
	 * this flag shall be ignored by the HWRM.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_DISABLE UINT32_C(0x80)
	/*
	 * When set to 1, then the HWRM shall enable FEC
	 * autonegotitation on this port if supported. When set to 0,
	 * then this flag shall be ignored. If FEC autonegotiation is
	 * not supported, then the HWRM shall ignore this flag.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_ENABLE UINT32_C(0x100)
	/*
	 * When set to 1, then the HWRM shall disable FEC
	 * autonegotiation on this port if supported. When set to 0,
	 * then this flag shall be ignored. If FEC autonegotiation is
	 * not supported, then the HWRM shall ignore this flag.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE	\
		UINT32_C(0x200)
	/*
	 * When set to 1, then the HWRM shall enable FEC CLAUSE 74	(Fire
	 * Code) on this port if supported. When set to 0, then this
	 * flag shall be ignored. If FEC CLAUSE 74 is not supported,
	 * then the HWRM shall ignore this flag.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE	\
		UINT32_C(0x400)
	/*
	 * When set to 1, then the HWRM shall disable FEC CLAUSE 74
	 *	(Fire Code) on this port if supported. When set to 0, then
	 * this flag shall be ignored. If FEC CLAUSE 74 is not
	 * supported, then the HWRM shall ignore this flag.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE	\
		UINT32_C(0x800)
	/*
	 * When set to 1, then the HWRM shall enable FEC CLAUSE 91	(Reed
	 * Solomon) on this port if supported. When set to 0, then this
	 * flag shall be ignored. If FEC CLAUSE 91 is not supported,
	 * then the HWRM shall ignore this flag.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE	\
		UINT32_C(0x1000)
	/*
	 * When set to 1, then the HWRM shall disable FEC CLAUSE 91
	 *	(Reed Solomon) on this port if supported. When set to 0, then
	 * this flag shall be ignored. If FEC CLAUSE 91 is not
	 * supported, then the HWRM shall ignore this flag.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE	\
		UINT32_C(0x2000)
	/*
	 * When this bit is set to '1', the link shall be forced to be
	 * taken down. # When this bit is set to '1", all other command
	 * input settings related to the link speed shall be ignored.
	 * Once the link state is forced down, it can be explicitly
	 * cleared from that state by setting this flag to '0'. # If
	 * this flag is set to '0', then the link shall be cleared from
	 * forced down state if the link is in forced down state. There
	 * may be conditions	(e.g. out-of-band or sideband configuration
	 * changes for the link) outside the scope of the HWRM
	 * implementation that may clear forced down link state.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DWN UINT32_C(0x4000)
	uint32_t enables;
	/* This bit must be '1' for the auto_mode field to be configured. */
	#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE	UINT32_C(0x1)
	/* This bit must be '1' for the auto_duplex field to be configured. */
	#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX	UINT32_C(0x2)
	/* This bit must be '1' for the auto_pause field to be configured. */
	#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE	UINT32_C(0x4)
	/*
	 * This bit must be '1' for the auto_link_speed field to be
	 * configured.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED	UINT32_C(0x8)
	/*
	 * This bit must be '1' for the auto_link_speed_mask field to be
	 * configured.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK	 \
		UINT32_C(0x10)
	/* This bit must be '1' for the wirespeed field to be configured. */
	#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_WIOUTPUTEED	UINT32_C(0x20)
	/* This bit must be '1' for the lpbk field to be configured. */
	#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_LPBK	UINT32_C(0x40)
	/* This bit must be '1' for the preemphasis field to be configured. */
	#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_PREEMPHASIS	UINT32_C(0x80)
	/* This bit must be '1' for the force_pause field to be configured. */
	#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAUSE	UINT32_C(0x100)
	/*
	 * This bit must be '1' for the eee_link_speed_mask field to be
	 * configured.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK	\
		UINT32_C(0x200)
	/* This bit must be '1' for the tx_lpi_timer field to be configured. */
	#define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER	UINT32_C(0x400)
	uint16_t port_id;
	/* Port ID of port that is to be configured. */
	uint16_t force_link_speed;
	/*
	 * This is the speed that will be used if the force bit is '1'.
	 * If unsupported speed is selected, an error will be generated.
	 */
	/* 100Mb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100MB	UINT32_C(0x1)
	/* 1Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_1GB	UINT32_C(0xa)
	/* 2Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2GB	UINT32_C(0x14)
	/* 2.5Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2_5GB	UINT32_C(0x19)
	/* 10Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10GB	UINT32_C(0x64)
	/* 20Mb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_20GB	UINT32_C(0xc8)
	/* 25Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_25GB	UINT32_C(0xfa)
	/* 40Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_40GB	UINT32_C(0x190)
	/* 50Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB	UINT32_C(0x1f4)
	/* 100Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB	UINT32_C(0x3e8)
	/* 10Mb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB	UINT32_C(0xffff)
	uint8_t auto_mode;
	/*
	 * This value is used to identify what autoneg mode is used when
	 * the link speed is not being forced.
	 */
	/*
	 * Disable autoneg or autoneg disabled. No
	 * speeds are selected.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_NONE	UINT32_C(0x0)
	/* Select all possible speeds for autoneg mode. */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ALL_SPEEDS	UINT32_C(0x1)
	/*
	 * Select only the auto_link_speed speed for
	 * autoneg mode. This mode has been DEPRECATED.
	 * An HWRM client should not use this mode.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_SPEED	UINT32_C(0x2)
	/*
	 * Select the auto_link_speed or any speed below
	 * that speed for autoneg. This mode has been
	 * DEPRECATED. An HWRM client should not use
	 * this mode.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW	UINT32_C(0x3)
	/*
	 * Select the speeds based on the corresponding
	 * link speed mask value that is provided.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK	UINT32_C(0x4)
	uint8_t auto_duplex;
	/*
	 * This is the duplex setting that will be used if the
	 * autoneg_mode is "one_speed" or "one_or_below".
	 */
	/* Half Duplex will be requested. */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_HALF	UINT32_C(0x0)
	/* Full duplex will be requested. */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_FULL	UINT32_C(0x1)
	/* Both Half and Full dupex will be requested. */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH	UINT32_C(0x2)
	uint8_t auto_pause;
	/*
	 * This value is used to configure the pause that will be used
	 * for autonegotiation. Add text on the usage of auto_pause and
	 * force_pause.
	 */
	/*
	 * When this bit is '1', Generation of tx pause messages has
	 * been requested. Disabled otherwise.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_TX	UINT32_C(0x1)
	/*
	 * When this bit is '1', Reception of rx pause messages has been
	 * requested. Disabled otherwise.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX	UINT32_C(0x2)
	/*
	 * When set to 1, the advertisement of pause is enabled. # When
	 * the auto_mode is not set to none and this flag is set to 1,
	 * then the auto_pause bits on this port are being advertised
	 * and autoneg pause results are being interpreted. # When the
	 * auto_mode is not set to none and this flag is set to 0, the
	 * pause is forced as indicated in force_pause, and also
	 * advertised as auto_pause bits, but the autoneg results are
	 * not interpreted since the pause configuration is being
	 * forced. # When the auto_mode is set to none and this flag is
	 * set to 1, auto_pause bits should be ignored and should be set
	 * to 0.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4)
	uint8_t unused_0;
	uint16_t auto_link_speed;
	/*
	 * This is the speed that will be used if the autoneg_mode is
	 * "one_speed" or "one_or_below". If an unsupported speed is
	 * selected, an error will be generated.
	 */
	/* 100Mb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100MB	UINT32_C(0x1)
	/* 1Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_1GB	UINT32_C(0xa)
	/* 2Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2GB	UINT32_C(0x14)
	/* 2.5Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2_5GB	UINT32_C(0x19)
	/* 10Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10GB	UINT32_C(0x64)
	/* 20Mb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_20GB	UINT32_C(0xc8)
	/* 25Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_25GB	UINT32_C(0xfa)
	/* 40Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_40GB	UINT32_C(0x190)
	/* 50Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB	UINT32_C(0x1f4)
	/* 100Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB	UINT32_C(0x3e8)
	/* 10Mb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB	UINT32_C(0xffff)
	uint16_t auto_link_speed_mask;
	/*
	 * This is a mask of link speeds that will be used if
	 * autoneg_mode is "mask". If unsupported speed is enabled an
	 * error will be generated.
	 */
	/* 100Mb link speed	(Half-duplex) */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MBHD	 \
		UINT32_C(0x1)
	/* 100Mb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MB \
		UINT32_C(0x2)
	/* 1Gb link speed	(Half-duplex) */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GBHD \
		UINT32_C(0x4)
	/* 1Gb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GB	\
		UINT32_C(0x8)
	/* 2Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2GB	\
		UINT32_C(0x10)
	/* 2.5Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2_5GB	\
		UINT32_C(0x20)
	/* 10Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10GB UINT32_C(0x40)
	/* 20Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_20GB UINT32_C(0x80)
	/* 25Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_25GB	\
		UINT32_C(0x100)
	/* 40Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB	\
		UINT32_C(0x200)
	/* 50Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB	\
		UINT32_C(0x400)
	/* 100Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB	\
		UINT32_C(0x800)
	/* 10Mb link speed	(Half-duplex) */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MBHD	\
		UINT32_C(0x1000)
	/* 10Mb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB	\
		UINT32_C(0x2000)
	uint8_t wirespeed;
	/* This value controls the wirespeed feature. */
	/* Wirespeed feature is disabled. */
	#define HWRM_PORT_PHY_CFG_INPUT_WIOUTPUTEED_OFF	UINT32_C(0x0)
	/* Wirespeed feature is enabled. */
	#define HWRM_PORT_PHY_CFG_INPUT_WIOUTPUTEED_ON	UINT32_C(0x1)
	uint8_t lpbk;
	/* This value controls the loopback setting for the PHY. */
	/* No loopback is selected. Normal operation. */
	#define HWRM_PORT_PHY_CFG_INPUT_LPBK_NONE	UINT32_C(0x0)
	/*
	 * The HW will be configured with local loopback
	 * such that host data is sent back to the host
	 * without modification.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_LPBK_LOCAL	UINT32_C(0x1)
	/*
	 * The HW will be configured with remote
	 * loopback such that port logic will send
	 * packets back out the transmitter that are
	 * received.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE	UINT32_C(0x2)
	uint8_t force_pause;
	/*
	 * This value is used to configure the pause that will be used
	 * for force mode.
	 */
	/*
	 * When this bit is '1', Generation of tx pause messages is
	 * supported. Disabled otherwise.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX	UINT32_C(0x1)
	/*
	 * When this bit is '1', Reception of rx pause messages is
	 * supported. Disabled otherwise.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX	UINT32_C(0x2)
	uint8_t unused_1;
	uint32_t preemphasis;
	/*
	 * This value controls the pre-emphasis to be used for the link.
	 * Driver should not set this value	(use enable.preemphasis = 0)
	 * unless driver is sure of setting. Normally HWRM FW will
	 * determine proper pre-emphasis.
	 */
	uint16_t eee_link_speed_mask;
	/*
	 * Setting for link speed mask that is used to advertise speeds
	 * during autonegotiation when EEE is enabled. This field is
	 * valid only when EEE is enabled. The speeds specified in this
	 * field shall be a subset of speeds specified in
	 * auto_link_speed_mask. If EEE is enabled,then at least one
	 * speed shall be provided in this mask.
	 */
	/* Reserved */
	#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 UINT32_C(0x1)
	/* 100Mb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB UINT32_C(0x2)
	/* Reserved */
	#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 UINT32_C(0x4)
	/* 1Gb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB	UINT32_C(0x8)
	/* Reserved */
	#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 UINT32_C(0x10)
	/* Reserved */
	#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 UINT32_C(0x20)
	/* 10Gb link speed */
	#define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB UINT32_C(0x40)
	uint8_t unused_2;
	uint8_t unused_3;
	uint32_t tx_lpi_timer;
	uint32_t unused_4;
	/*
	 * Reuested setting of TX LPI timer in microseconds. This field
	 * is valid only when EEE is enabled and TX LPI is enabled.
	 */
	#define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
	#define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT	0
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_port_phy_cfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_port_phy_qcfg */
/* Description: This command queries the PHY configuration for the port. */
/* Input	(24 bytes) */
struct hwrm_port_phy_qcfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t port_id;
	/* Port ID of port that is to be queried. */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(96 bytes) */
struct hwrm_port_phy_qcfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint8_t link;
	/* This value indicates the current link status. */
	/* There is no link or cable detected. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_NO_LINK	UINT32_C(0x0)
	/* There is no link, but a cable has been detected. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL	UINT32_C(0x1)
	/* There is a link. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK	UINT32_C(0x2)
	uint8_t unused_0;
	uint16_t link_speed;
	/* This value indicates the current link speed of the connection. */
	/* 100Mb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB	UINT32_C(0x1)
	/* 1Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB	UINT32_C(0xa)
	/* 2Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB	UINT32_C(0x14)
	/* 2.5Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB	UINT32_C(0x19)
	/* 10Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB	UINT32_C(0x64)
	/* 20Mb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB	UINT32_C(0xc8)
	/* 25Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB	UINT32_C(0xfa)
	/* 40Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB	UINT32_C(0x190)
	/* 50Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB	UINT32_C(0x1f4)
	/* 100Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB	UINT32_C(0x3e8)
	/* 10Mb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB	UINT32_C(0xffff)
	uint8_t duplex;
	/* This value is indicates the duplex of the current connection. */
	/* Half Duplex connection. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_HALF	UINT32_C(0x0)
	/* Full duplex connection. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_FULL	UINT32_C(0x1)
	uint8_t pause;
	/*
	 * This value is used to indicate the current pause
	 * configuration. When autoneg is enabled, this value represents
	 * the autoneg results of pause configuration.
	 */
	/*
	 * When this bit is '1', Generation of tx pause messages is
	 * supported. Disabled otherwise.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX	UINT32_C(0x1)
	/*
	 * When this bit is '1', Reception of rx pause messages is
	 * supported. Disabled otherwise.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX	UINT32_C(0x2)
	uint16_t support_speeds;
	/*
	 * The supported speeds for the port. This is a bit mask. For
	 * each speed that is supported, the corrresponding bit will be
	 * set to '1'.
	 */
	/* 100Mb link speed	(Half-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD UINT32_C(0x1)
	/* 100Mb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB UINT32_C(0x2)
	/* 1Gb link speed	(Half-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD UINT32_C(0x4)
	/* 1Gb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB	UINT32_C(0x8)
	/* 2Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB	UINT32_C(0x10)
	/* 2.5Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB UINT32_C(0x20)
	/* 10Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB UINT32_C(0x40)
	/* 20Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB UINT32_C(0x80)
	/* 25Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB UINT32_C(0x100)
	/* 40Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB UINT32_C(0x200)
	/* 50Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB UINT32_C(0x400)
	/* 100Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB UINT32_C(0x800)
	/* 10Mb link speed	(Half-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD	UINT32_C(0x1000)
	/* 10Mb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB UINT32_C(0x2000)
	uint16_t force_link_speed;
	/*
	 * Current setting of forced link speed. When the link speed is
	 * not being forced, this value shall be set to 0.
	 */
	/* 100Mb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1)
	/* 1Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_1GB	UINT32_C(0xa)
	/* 2Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2GB	UINT32_C(0x14)
	/* 2.5Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19)
	/* 10Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10GB	UINT32_C(0x64)
	/* 20Mb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_20GB	UINT32_C(0xc8)
	/* 25Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_25GB	UINT32_C(0xfa)
	/* 40Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190)
	/* 50Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
	/* 100Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8)
	/* 10Mb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
	uint8_t auto_mode;
	/* Current setting of auto negotiation mode. */
	/*
	 * Disable autoneg or autoneg disabled. No
	 * speeds are selected.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE	UINT32_C(0x0)
	/* Select all possible speeds for autoneg mode. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ALL_SPEEDS	UINT32_C(0x1)
	/*
	 * Select only the auto_link_speed speed for
	 * autoneg mode. This mode has been DEPRECATED.
	 * An HWRM client should not use this mode.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_SPEED	UINT32_C(0x2)
	/*
	 * Select the auto_link_speed or any speed below
	 * that speed for autoneg. This mode has been
	 * DEPRECATED. An HWRM client should not use
	 * this mode.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
	/*
	 * Select the speeds based on the corresponding
	 * link speed mask value that is provided.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK	UINT32_C(0x4)
	uint8_t auto_pause;
	/*
	 * Current setting of pause autonegotiation. Move autoneg_pause
	 * flag here.
	 */
	/*
	 * When this bit is '1', Generation of tx pause messages has
	 * been requested. Disabled otherwise.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_TX	UINT32_C(0x1)
	/*
	 * When this bit is '1', Reception of rx pause messages has been
	 * requested. Disabled otherwise.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_RX	UINT32_C(0x2)
	/*
	 * When set to 1, the advertisement of pause is enabled. # When
	 * the auto_mode is not set to none and this flag is set to 1,
	 * then the auto_pause bits on this port are being advertised
	 * and autoneg pause results are being interpreted. # When the
	 * auto_mode is not set to none and this flag is set to 0, the
	 * pause is forced as indicated in force_pause, and also
	 * advertised as auto_pause bits, but the autoneg results are
	 * not interpreted since the pause configuration is being
	 * forced. # When the auto_mode is set to none and this flag is
	 * set to 1, auto_pause bits should be ignored and should be set
	 * to 0.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4)
	uint16_t auto_link_speed;
	/*
	 * Current setting for auto_link_speed. This field is only valid
	 * when auto_mode is set to "one_speed" or "one_or_below".
	 */
	/* 100Mb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100MB	UINT32_C(0x1)
	/* 1Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_1GB	UINT32_C(0xa)
	/* 2Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2GB	UINT32_C(0x14)
	/* 2.5Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2_5GB	UINT32_C(0x19)
	/* 10Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10GB	UINT32_C(0x64)
	/* 20Mb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_20GB	UINT32_C(0xc8)
	/* 25Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_25GB	UINT32_C(0xfa)
	/* 40Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_40GB	UINT32_C(0x190)
	/* 50Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB	UINT32_C(0x1f4)
	/* 100Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
	/* 10Mb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
	uint16_t auto_link_speed_mask;
	/*
	 * Current setting for auto_link_speed_mask that is used to
	 * advertise speeds during autonegotiation. This field is only
	 * valid when auto_mode is set to "mask". The speeds specified
	 * in this field shall be a subset of supported speeds on this
	 * port.
	 */
	/* 100Mb link speed	(Half-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MBHD	\
		UINT32_C(0x1)
	/* 100Mb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MB	 \
		UINT32_C(0x2)
	/* 1Gb link speed	(Half-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GBHD	 \
		UINT32_C(0x4)
	/* 1Gb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GB UINT32_C(0x8)
	/* 2Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2GB	\
		UINT32_C(0x10)
	/* 2.5Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2_5GB	 \
		UINT32_C(0x20)
	/* 10Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10GB	\
		UINT32_C(0x40)
	/* 20Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_20GB	\
		UINT32_C(0x80)
	/* 25Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_25GB	\
		UINT32_C(0x100)
	/* 40Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_40GB	\
		UINT32_C(0x200)
	/* 50Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_50GB	\
		UINT32_C(0x400)
	/* 100Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100GB	 \
		UINT32_C(0x800)
	/* 10Mb link speed	(Half-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MBHD	\
		UINT32_C(0x1000)
	/* 10Mb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB	\
		UINT32_C(0x2000)
	uint8_t wirespeed;
	/* Current setting for wirespeed. */
	/* Wirespeed feature is disabled. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_WIOUTPUTEED_OFF	UINT32_C(0x0)
	/* Wirespeed feature is enabled. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_WIOUTPUTEED_ON	UINT32_C(0x1)
	uint8_t lpbk;
	/* Current setting for loopback. */
	/* No loopback is selected. Normal operation. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_NONE	UINT32_C(0x0)
	/*
	 * The HW will be configured with local loopback
	 * such that host data is sent back to the host
	 * without modification.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LOCAL	UINT32_C(0x1)
	/*
	 * The HW will be configured with remote
	 * loopback such that port logic will send
	 * packets back out the transmitter that are
	 * received.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE	UINT32_C(0x2)
	uint8_t force_pause;
	/*
	 * Current setting of forced pause. When the pause configuration
	 * is not being forced, then this value shall be set to 0.
	 */
	/*
	 * When this bit is '1', Generation of tx pause messages is
	 * supported. Disabled otherwise.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_TX	UINT32_C(0x1)
	/*
	 * When this bit is '1', Reception of rx pause messages is
	 * supported. Disabled otherwise.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_RX	UINT32_C(0x2)
	uint8_t module_status;
	/*
	 * This value indicates the current status of the optics module
	 * on this port.
	 */
	/* Module is inserted and accepted */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NONE	UINT32_C(0x0)
	/* Module is rejected and transmit side Laser is disabled. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX UINT32_C(0x1)
	/* Module mismatch warning. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG UINT32_C(0x2)
	/* Module is rejected and powered down. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_PWRDOWN	UINT32_C(0x3)
	/* Module is not inserted. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED \
		UINT32_C(0x4)
	/* Module status is not applicable. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \
		UINT32_C(0xff)
	uint32_t preemphasis;
	/* Current setting for preemphasis. */
	uint8_t phy_maj;
	/* This field represents the major version of the PHY. */
	uint8_t phy_min;
	/* This field represents the minor version of the PHY. */
	uint8_t phy_bld;
	/* This field represents the build version of the PHY. */
	uint8_t phy_type;
	/* This value represents a PHY type. */
	/* Unknown */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN	UINT32_C(0x0)
	/* BASE-CR */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR	UINT32_C(0x1)
	/* BASE-KR4	(Deprecated) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4	UINT32_C(0x2)
	/* BASE-LR */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR	UINT32_C(0x3)
	/* BASE-SR */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR	UINT32_C(0x4)
	/* BASE-KR2	(Deprecated) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2	UINT32_C(0x5)
	/* BASE-KX */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX	UINT32_C(0x6)
	/* BASE-KR */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR	UINT32_C(0x7)
	/* BASE-T */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET	UINT32_C(0x8)
	/* EEE capable BASE-T */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE	UINT32_C(0x9)
	/* SGMII connected external PHY */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY	UINT32_C(0xa)
	/* 25G_BASECR_CA_L */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_L UINT32_C(0xb)
	/* 25G_BASECR_CA_S */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_S UINT32_C(0xc)
	/* 25G_BASECR_CA_N */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_N UINT32_C(0xd)
	/* 25G_BASESR */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASESR	UINT32_C(0xe)
	/* 100G_BASECR4 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASECR4	UINT32_C(0xf)
	/* 100G_BASESR4 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR4	UINT32_C(0x10)
	/* 100G_BASELR4 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASELR4	UINT32_C(0x11)
	/* 100G_BASEER4 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASEER4	UINT32_C(0x12)
	/* 100G_BASESR10 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR10 UINT32_C(0x13)
	/* 40G_BASECR4 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASECR4	UINT32_C(0x14)
	/* 40G_BASESR4 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASESR4	UINT32_C(0x15)
	/* 40G_BASELR4 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASELR4	UINT32_C(0x16)
	/* 40G_BASEER4 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASEER4	UINT32_C(0x17)
	/* 40G_ACTIVE_CABLE */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_ACTIVE_CABLE \
		UINT32_C(0x18)
	uint8_t media_type;
	/* This value represents a media type. */
	/* Unknown */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_UNKNOWN	UINT32_C(0x0)
	/* Twisted Pair */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP	UINT32_C(0x1)
	/* Direct Attached Copper */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC	UINT32_C(0x2)
	/* Fiber */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE	UINT32_C(0x3)
	uint8_t xcvr_pkg_type;
	/* This value represents a transceiver type. */
	/* PHY and MAC are in the same package */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL \
		UINT32_C(0x1)
	/* PHY and MAC are in different packages */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL \
		UINT32_C(0x2)
	uint8_t eee_config_phy_addr;
	/*
	 * This field represents flags related to EEE configuration.
	 * These EEE configuration flags are valid only when the
	 * auto_mode is not set to none	(in other words autonegotiation
	 * is enabled).
	 */
	/* This field represents PHY address. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK	UINT32_C(0x1f)
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_SFT	0
	/*
	 * When set to 1, Energy Efficient Ethernet	(EEE) mode is
	 * enabled. Speeds for autoneg with EEE mode enabled are based
	 * on eee_link_speed_mask.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED UINT32_C(0x20)
	/*
	 * This flag is valid only when eee_enabled is set to 1. # If
	 * eee_enabled is set to 0, then EEE mode is disabled and this
	 * flag shall be ignored. # If eee_enabled is set to 1 and this
	 * flag is set to 1, then Energy Efficient Ethernet	(EEE) mode
	 * is enabled and in use. # If eee_enabled is set to 1 and this
	 * flag is set to 0, then Energy Efficient Ethernet	(EEE) mode
	 * is enabled but is currently not in use.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ACTIVE	UINT32_C(0x40)
	/*
	 * This flag is valid only when eee_enabled is set to 1. # If
	 * eee_enabled is set to 0, then EEE mode is disabled and this
	 * flag shall be ignored. # If eee_enabled is set to 1 and this
	 * flag is set to 1, then Energy Efficient Ethernet	(EEE) mode
	 * is enabled and TX LPI is enabled. # If eee_enabled is set to
	 * 1 and this flag is set to 0, then Energy Efficient Ethernet
	 *	(EEE) mode is enabled but TX LPI is disabled.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_TX_LPI	UINT32_C(0x80)
	/*
	 * This field represents flags related to EEE configuration.
	 * These EEE configuration flags are valid only when the
	 * auto_mode is not set to none	(in other words autonegotiation
	 * is enabled).
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK	UINT32_C(0xe0)
	#define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_SFT	5
	uint8_t parallel_detect;
	/* Reserved field, set to 0 */
	/*
	 * When set to 1, the parallel detection is used to determine
	 * the speed of the link partner. Parallel detection is used
	 * when a autonegotiation capable device is connected to a link
	 * parter that is not capable of autonegotiation.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT	UINT32_C(0x1)
	/* Reserved field, set to 0 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_MASK	UINT32_C(0xfe)
	#define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_SFT	1
	uint16_t link_partner_adv_speeds;
	/*
	 * The advertised speeds for the port by the link partner. Each
	 * advertised speed will be set to '1'.
	 */
	/* 100Mb link speed	(Half-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MBHD \
		UINT32_C(0x1)
	/* 100Mb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MB   \
		UINT32_C(0x2)
	/* 1Gb link speed	(Half-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GBHD   \
		UINT32_C(0x4)
	/* 1Gb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GB	\
		UINT32_C(0x8)
	/* 2Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2GB	\
		UINT32_C(0x10)
	/* 2.5Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2_5GB   \
		UINT32_C(0x20)
	/* 10Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10GB	\
		UINT32_C(0x40)
	/* 20Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_20GB	\
		UINT32_C(0x80)
	/* 25Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_25GB	\
		UINT32_C(0x100)
	/* 40Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_40GB	\
		UINT32_C(0x200)
	/* 50Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_50GB	\
		UINT32_C(0x400)
	/* 100Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100GB   \
		UINT32_C(0x800)
	/* 10Mb link speed	(Half-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MBHD  \
		UINT32_C(0x1000)
	/* 10Mb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MB	\
		UINT32_C(0x2000)
	uint8_t link_partner_adv_auto_mode;
	/*
	 * The advertised autoneg for the port by the link partner. This
	 * field is deprecated and should be set to 0.
	 */
	/*
	 * Disable autoneg or autoneg disabled. No
	 * speeds are selected.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE \
		UINT32_C(0x0)
	/* Select all possible speeds for autoneg mode. */
	#define \
	HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \
		UINT32_C(0x1)
	/*
	 * Select only the auto_link_speed speed for
	 * autoneg mode. This mode has been DEPRECATED.
	 * An HWRM client should not use this mode.
	 */
	#define \
	HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED \
		UINT32_C(0x2)
	/*
	 * Select the auto_link_speed or any speed below
	 * that speed for autoneg. This mode has been
	 * DEPRECATED. An HWRM client should not use
	 * this mode.
	 */
	#define \
	HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \
		UINT32_C(0x3)
	/*
	 * Select the speeds based on the corresponding
	 * link speed mask value that is provided.
	 */
	#define \
	HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \
		UINT32_C(0x4)
	uint8_t link_partner_adv_pause;
	/* The advertised pause settings on the port by the link partner. */
	/*
	 * When this bit is '1', Generation of tx pause messages is
	 * supported. Disabled otherwise.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_TX	\
		UINT32_C(0x1)
	/*
	 * When this bit is '1', Reception of rx pause messages is
	 * supported. Disabled otherwise.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_RX	\
		UINT32_C(0x2)
	uint16_t adv_eee_link_speed_mask;
	/*
	 * Current setting for link speed mask that is used to advertise
	 * speeds during autonegotiation when EEE is enabled. This field
	 * is valid only when eee_enabled flags is set to 1. The speeds
	 * specified in this field shall be a subset of speeds specified
	 * in auto_link_speed_mask.
	 */
	/* Reserved */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD1   \
		UINT32_C(0x1)
	/* 100Mb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_100MB   \
		UINT32_C(0x2)
	/* Reserved */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD2   \
		UINT32_C(0x4)
	/* 1Gb link speed	(Full-duplex) */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_1GB	\
		UINT32_C(0x8)
	/* Reserved */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD3   \
		UINT32_C(0x10)
	/* Reserved */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD4   \
		UINT32_C(0x20)
	/* 10Gb link speed */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_10GB	\
		UINT32_C(0x40)
	uint16_t link_partner_adv_eee_link_speed_mask;
	/*
	 * Current setting for link speed mask that is advertised by the
	 * link partner when EEE is enabled. This field is valid only
	 * when eee_enabled flags is set to 1.
	 */
	/* Reserved */
	#define \
	HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
		UINT32_C(0x1)
	/* 100Mb link speed	(Full-duplex) */
	#define \
	HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB \
		UINT32_C(0x2)
	/* Reserved */
	#define \
	HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
		UINT32_C(0x4)
	/* 1Gb link speed	(Full-duplex) */
	#define \
	HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB \
		UINT32_C(0x8)
	/* Reserved */
	#define \
	HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
		UINT32_C(0x10)
	/* Reserved */
	#define \
	HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
		UINT32_C(0x20)
	/* 10Gb link speed */
	#define \
	HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB \
		UINT32_C(0x40)
	uint32_t xcvr_identifier_type_tx_lpi_timer;
	/* This value represents transceiver identifier type. */
	/*
	 * Current setting of TX LPI timer in microseconds. This field
	 * is valid only when_eee_enabled flag is set to 1 and
	 * tx_lpi_enabled is set to 1.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
	#define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT	0
	/* This value represents transceiver identifier type. */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK	\
		UINT32_C(0xff000000)
	#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT	24
	/* Unknown */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \
		(UINT32_C(0x0) << 24)
	/* SFP/SFP+/SFP28 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \
		(UINT32_C(0x3) << 24)
	/* QSFP */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \
		(UINT32_C(0xc) << 24)
	/* QSFP+ */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \
		(UINT32_C(0xd) << 24)
	/* QSFP28 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \
		(UINT32_C(0x11) << 24)
	uint16_t fec_cfg;
	/*
	 * This value represents the current configuration of Forward
	 * Error Correction	(FEC) on the port.
	 */
	/*
	 * When set to 1, then FEC is not supported on this port. If
	 * this flag is set to 1, then all other FEC configuration flags
	 * shall be ignored. When set to 0, then FEC is supported as
	 * indicated by other configuration flags. If no cable is
	 * attached and the HWRM does not yet know the FEC capability,
	 * then the HWRM shall set this flag to 1 when reporting FEC
	 * capability.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED	 \
		UINT32_C(0x1)
	/*
	 * When set to 1, then FEC autonegotiation is supported on this
	 * port. When set to 0, then FEC autonegotiation is not
	 * supported on this port.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_SUPPORTED   \
		UINT32_C(0x2)
	/*
	 * When set to 1, then FEC autonegotiation is enabled on this
	 * port. When set to 0, then FEC autonegotiation is disabled if
	 * supported. This flag should be ignored if FEC autonegotiation
	 * is not supported on this port.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED	\
		UINT32_C(0x4)
	/*
	 * When set to 1, then FEC CLAUSE 74	(Fire Code) is supported on
	 * this port. When set to 0, then FEC CLAUSE 74	(Fire Code) is
	 * not supported on this port.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED  \
		UINT32_C(0x8)
	/*
	 * When set to 1, then FEC CLAUSE 74	(Fire Code) is enabled on
	 * this port. When set to 0, then FEC CLAUSE 74	(Fire Code) is
	 * disabled if supported. This flag should be ignored if FEC
	 * CLAUSE 74 is not supported on this port.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED	\
		UINT32_C(0x10)
	/*
	 * When set to 1, then FEC CLAUSE 91	(Reed Solomon) is supported
	 * on this port. When set to 0, then FEC CLAUSE 91	(Reed
	 * Solomon) is not supported on this port.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED  \
		UINT32_C(0x20)
	/*
	 * When set to 1, then FEC CLAUSE 91	(Reed Solomon) is enabled
	 * on this port. When set to 0, then FEC CLAUSE 91	(Reed
	 * Solomon) is disabled if supported. This flag should be
	 * ignored if FEC CLAUSE 91 is not supported on this port.
	 */
	#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED	\
		UINT32_C(0x40)
	uint8_t unused_1;
	uint8_t unused_2;
	char phy_vendor_name[16];
	/*
	 * Up to 16 bytes of null padded ASCII string representing PHY
	 * vendor. If the string is set to null, then the vendor name is
	 * not available.
	 */
	char phy_vendor_partnumber[16];
	/*
	 * Up to 16 bytes of null padded ASCII string that identifies
	 * vendor specific part number of the PHY. If the string is set
	 * to null, then the vendor specific part number is not
	 * available.
	 */
	uint32_t unused_3;
	uint8_t unused_4;
	uint8_t unused_5;
	uint8_t unused_6;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_port_qstats */
/* Description: This function returns per port Ethernet statistics. */
/* Input	(40 bytes) */
struct hwrm_port_qstats_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t port_id;
	/* Port ID of port that is being queried. */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2[3];
	uint8_t unused_3;
	uint64_t tx_stat_host_addr;
	/* This is the host address where Tx port statistics will be stored */
	uint64_t rx_stat_host_addr;
	/* This is the host address where Rx port statistics will be stored */
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_port_qstats_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint16_t tx_stat_size;
	/* The size of TX port statistics block in bytes. */
	uint16_t rx_stat_size;
	/* The size of RX port statistics block in bytes. */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_port_clr_stats */
/*
 * Description: This function clears per port statistics. The HWRM shall not
 * allow a VF driver to clear port statistics. The HWRM shall not allow a PF
 * driver to clear port statistics in a partitioning mode. The HWRM may allow a
 * PF driver to clear port statistics in the non-partitioning mode.
 */
/* Input	(24 bytes) */
struct hwrm_port_clr_stats_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t port_id;
	/* Port ID of port that is being queried. */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_port_clr_stats_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_port_led_cfg */
/*
 * Description: This function is used to configure LEDs on a given port. Each
 * port has individual set of LEDs associated with it. These LEDs are used for
 * speed/link configuration as well as activity indicator configuration. Up to
 * three LEDs can be configured, one for activity and two for speeds.
 */
/* Input	(64 bytes) */
struct hwrm_port_led_cfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t enables;
	/* This bit must be '1' for the led0_id field to be configured. */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID	UINT32_C(0x1)
	/* This bit must be '1' for the led0_state field to be configured. */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE	UINT32_C(0x2)
	/* This bit must be '1' for the led0_color field to be configured. */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR	UINT32_C(0x4)
	/*
	 * This bit must be '1' for the led0_blink_on field to be
	 * configured.
	 */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON	UINT32_C(0x8)
	/*
	 * This bit must be '1' for the led0_blink_off field to be
	 * configured.
	 */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF UINT32_C(0x10)
	/*
	 * This bit must be '1' for the led0_group_id field to be
	 * configured.
	 */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID UINT32_C(0x20)
	/* This bit must be '1' for the led1_id field to be configured. */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID	UINT32_C(0x40)
	/* This bit must be '1' for the led1_state field to be configured. */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_STATE	UINT32_C(0x80)
	/* This bit must be '1' for the led1_color field to be configured. */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_COLOR	UINT32_C(0x100)
	/*
	 * This bit must be '1' for the led1_blink_on field to be
	 * configured.
	 */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_ON UINT32_C(0x200)
	/*
	 * This bit must be '1' for the led1_blink_off field to be
	 * configured.
	 */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_OFF UINT32_C(0x400)
	/*
	 * This bit must be '1' for the led1_group_id field to be
	 * configured.
	 */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_GROUP_ID UINT32_C(0x800)
	/* This bit must be '1' for the led2_id field to be configured. */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_ID	UINT32_C(0x1000)
	/* This bit must be '1' for the led2_state field to be configured. */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_STATE	UINT32_C(0x2000)
	/* This bit must be '1' for the led2_color field to be configured. */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_COLOR	UINT32_C(0x4000)
	/*
	 * This bit must be '1' for the led2_blink_on field to be
	 * configured.
	 */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_ON UINT32_C(0x8000)
	/*
	 * This bit must be '1' for the led2_blink_off field to be
	 * configured.
	 */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_OFF UINT32_C(0x10000)
	/*
	 * This bit must be '1' for the led2_group_id field to be
	 * configured.
	 */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_GROUP_ID UINT32_C(0x20000)
	/* This bit must be '1' for the led3_id field to be configured. */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_ID	UINT32_C(0x40000)
	/* This bit must be '1' for the led3_state field to be configured. */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_STATE  UINT32_C(0x80000)
	/* This bit must be '1' for the led3_color field to be configured. */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_COLOR  UINT32_C(0x100000)
	/*
	 * This bit must be '1' for the led3_blink_on field to be
	 * configured.
	 */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_ON UINT32_C(0x200000)
	/*
	 * This bit must be '1' for the led3_blink_off field to be
	 * configured.
	 */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_OFF	\
		UINT32_C(0x400000)
	/*
	 * This bit must be '1' for the led3_group_id field to be
	 * configured.
	 */
	#define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_GROUP_ID UINT32_C(0x800000)
	uint16_t port_id;
	/* Port ID of port whose LEDs are configured. */
	uint8_t num_leds;
	/*
	 * The number of LEDs that are being configured. Up to 4 LEDs
	 * can be configured with this command.
	 */
	uint8_t rsvd;
	/* Reserved field. */
	uint8_t led0_id;
	/* An identifier for the LED #0. */
	uint8_t led0_state;
	/* The requested state of the LED #0. */
	/* Default state of the LED */
	#define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_DEFAULT	UINT32_C(0x0)
	/* Off */
	#define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_OFF	UINT32_C(0x1)
	/* On */
	#define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_ON	UINT32_C(0x2)
	/* Blink */
	#define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINK	UINT32_C(0x3)
	/* Blink Alternately */
	#define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT	UINT32_C(0x4)
	uint8_t led0_color;
	/* The requested color of LED #0. */
	/* Default */
	#define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_DEFAULT	UINT32_C(0x0)
	/* Amber */
	#define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_AMBER	UINT32_C(0x1)
	/* Green */
	#define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREEN	UINT32_C(0x2)
	/* Green or Amber */
	#define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER	UINT32_C(0x3)
	uint8_t unused_0;
	uint16_t led0_blink_on;
	/*
	 * If the LED #0 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED on
	 * between cycles.
	 */
	uint16_t led0_blink_off;
	/*
	 * If the LED #0 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED off
	 * between cycles.
	 */
	uint8_t led0_group_id;
	/*
	 * An identifier for the group of LEDs that LED #0 belongs to.
	 * If set to 0, then the LED #0 shall not be grouped and shall
	 * be treated as an individual resource. For all other non-zero
	 * values of this field, LED #0 shall be grouped together with
	 * the LEDs with the same group ID value.
	 */
	uint8_t rsvd0;
	/* Reserved field. */
	uint8_t led1_id;
	/* An identifier for the LED #1. */
	uint8_t led1_state;
	/* The requested state of the LED #1. */
	/* Default state of the LED */
	#define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_DEFAULT	UINT32_C(0x0)
	/* Off */
	#define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_OFF	UINT32_C(0x1)
	/* On */
	#define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_ON	UINT32_C(0x2)
	/* Blink */
	#define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINK	UINT32_C(0x3)
	/* Blink Alternately */
	#define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT	UINT32_C(0x4)
	uint8_t led1_color;
	/* The requested color of LED #1. */
	/* Default */
	#define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_DEFAULT	UINT32_C(0x0)
	/* Amber */
	#define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_AMBER	UINT32_C(0x1)
	/* Green */
	#define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREEN	UINT32_C(0x2)
	/* Green or Amber */
	#define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER	UINT32_C(0x3)
	uint8_t unused_1;
	uint16_t led1_blink_on;
	/*
	 * If the LED #1 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED on
	 * between cycles.
	 */
	uint16_t led1_blink_off;
	/*
	 * If the LED #1 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED off
	 * between cycles.
	 */
	uint8_t led1_group_id;
	/*
	 * An identifier for the group of LEDs that LED #1 belongs to.
	 * If set to 0, then the LED #1 shall not be grouped and shall
	 * be treated as an individual resource. For all other non-zero
	 * values of this field, LED #1 shall be grouped together with
	 * the LEDs with the same group ID value.
	 */
	uint8_t rsvd1;
	/* Reserved field. */
	uint8_t led2_id;
	/* An identifier for the LED #2. */
	uint8_t led2_state;
	/* The requested state of the LED #2. */
	/* Default state of the LED */
	#define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_DEFAULT	UINT32_C(0x0)
	/* Off */
	#define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_OFF	UINT32_C(0x1)
	/* On */
	#define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_ON	UINT32_C(0x2)
	/* Blink */
	#define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINK	UINT32_C(0x3)
	/* Blink Alternately */
	#define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT	UINT32_C(0x4)
	uint8_t led2_color;
	/* The requested color of LED #2. */
	/* Default */
	#define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_DEFAULT	UINT32_C(0x0)
	/* Amber */
	#define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_AMBER	UINT32_C(0x1)
	/* Green */
	#define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREEN	UINT32_C(0x2)
	/* Green or Amber */
	#define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER	UINT32_C(0x3)
	uint8_t unused_2;
	uint16_t led2_blink_on;
	/*
	 * If the LED #2 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED on
	 * between cycles.
	 */
	uint16_t led2_blink_off;
	/*
	 * If the LED #2 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED off
	 * between cycles.
	 */
	uint8_t led2_group_id;
	/*
	 * An identifier for the group of LEDs that LED #2 belongs to.
	 * If set to 0, then the LED #2 shall not be grouped and shall
	 * be treated as an individual resource. For all other non-zero
	 * values of this field, LED #2 shall be grouped together with
	 * the LEDs with the same group ID value.
	 */
	uint8_t rsvd2;
	/* Reserved field. */
	uint8_t led3_id;
	/* An identifier for the LED #3. */
	uint8_t led3_state;
	/* The requested state of the LED #3. */
	/* Default state of the LED */
	#define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_DEFAULT	UINT32_C(0x0)
	/* Off */
	#define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_OFF	UINT32_C(0x1)
	/* On */
	#define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_ON	UINT32_C(0x2)
	/* Blink */
	#define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINK	UINT32_C(0x3)
	/* Blink Alternately */
	#define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT	UINT32_C(0x4)
	uint8_t led3_color;
	/* The requested color of LED #3. */
	/* Default */
	#define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_DEFAULT	UINT32_C(0x0)
	/* Amber */
	#define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_AMBER	UINT32_C(0x1)
	/* Green */
	#define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREEN	UINT32_C(0x2)
	/* Green or Amber */
	#define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER	UINT32_C(0x3)
	uint8_t unused_3;
	uint16_t led3_blink_on;
	/*
	 * If the LED #3 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED on
	 * between cycles.
	 */
	uint16_t led3_blink_off;
	/*
	 * If the LED #3 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED off
	 * between cycles.
	 */
	uint8_t led3_group_id;
	/*
	 * An identifier for the group of LEDs that LED #3 belongs to.
	 * If set to 0, then the LED #3 shall not be grouped and shall
	 * be treated as an individual resource. For all other non-zero
	 * values of this field, LED #3 shall be grouped together with
	 * the LEDs with the same group ID value.
	 */
	uint8_t rsvd3;
	/* Reserved field. */
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_port_led_cfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_port_led_qcfg */
/*
 * Description: This function is used to query configuration of LEDs on a given
 * port. Each port has individual set of LEDs associated with it. These LEDs are
 * used for speed/link configuration as well as activity indicator
 * configuration. Up to three LEDs can be configured, one for activity and two
 * for speeds.
 */
/* Input	(24 bytes) */
struct hwrm_port_led_qcfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t port_id;
	/* Port ID of port whose LED configuration is being queried. */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(56 bytes) */
struct hwrm_port_led_qcfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint8_t num_leds;
	/*
	 * The number of LEDs that are configured on this port. Up to 4
	 * LEDs can be returned in the response.
	 */
	uint8_t led0_id;
	/* An identifier for the LED #0. */
	uint8_t led0_type;
	/* The type of LED #0. */
	/* Speed LED */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_SPEED	UINT32_C(0x0)
	/* Activity LED */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_ACTIVITY	UINT32_C(0x1)
	/* Invalid */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID	UINT32_C(0xff)
	uint8_t led0_state;
	/* The current state of the LED #0. */
	/* Default state of the LED */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT	UINT32_C(0x0)
	/* Off */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_OFF	UINT32_C(0x1)
	/* On */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_ON	UINT32_C(0x2)
	/* Blink */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINK	UINT32_C(0x3)
	/* Blink Alternately */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT	UINT32_C(0x4)
	uint8_t led0_color;
	/* The color of LED #0. */
	/* Default */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_DEFAULT	UINT32_C(0x0)
	/* Amber */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_AMBER	UINT32_C(0x1)
	/* Green */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREEN	UINT32_C(0x2)
	/* Green or Amber */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER	UINT32_C(0x3)
	uint8_t unused_0;
	uint16_t led0_blink_on;
	/*
	 * If the LED #0 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED on
	 * between cycles.
	 */
	uint16_t led0_blink_off;
	/*
	 * If the LED #0 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED off
	 * between cycles.
	 */
	uint8_t led0_group_id;
	/*
	 * An identifier for the group of LEDs that LED #0 belongs to.
	 * If set to 0, then the LED #0 is not grouped. For all other
	 * non-zero values of this field, LED #0 is grouped together
	 * with the LEDs with the same group ID value.
	 */
	uint8_t led1_id;
	/* An identifier for the LED #1. */
	uint8_t led1_type;
	/* The type of LED #1. */
	/* Speed LED */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_SPEED	UINT32_C(0x0)
	/* Activity LED */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_ACTIVITY	UINT32_C(0x1)
	/* Invalid */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID	UINT32_C(0xff)
	uint8_t led1_state;
	/* The current state of the LED #1. */
	/* Default state of the LED */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_DEFAULT	UINT32_C(0x0)
	/* Off */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_OFF	UINT32_C(0x1)
	/* On */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_ON	UINT32_C(0x2)
	/* Blink */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINK	UINT32_C(0x3)
	/* Blink Alternately */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT	UINT32_C(0x4)
	uint8_t led1_color;
	/* The color of LED #1. */
	/* Default */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_DEFAULT	UINT32_C(0x0)
	/* Amber */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_AMBER	UINT32_C(0x1)
	/* Green */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREEN	UINT32_C(0x2)
	/* Green or Amber */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER	UINT32_C(0x3)
	uint8_t unused_1;
	uint16_t led1_blink_on;
	/*
	 * If the LED #1 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED on
	 * between cycles.
	 */
	uint16_t led1_blink_off;
	/*
	 * If the LED #1 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED off
	 * between cycles.
	 */
	uint8_t led1_group_id;
	/*
	 * An identifier for the group of LEDs that LED #1 belongs to.
	 * If set to 0, then the LED #1 is not grouped. For all other
	 * non-zero values of this field, LED #1 is grouped together
	 * with the LEDs with the same group ID value.
	 */
	uint8_t led2_id;
	/* An identifier for the LED #2. */
	uint8_t led2_type;
	/* The type of LED #2. */
	/* Speed LED */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_SPEED	UINT32_C(0x0)
	/* Activity LED */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_ACTIVITY	UINT32_C(0x1)
	/* Invalid */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID	UINT32_C(0xff)
	uint8_t led2_state;
	/* The current state of the LED #2. */
	/* Default state of the LED */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_DEFAULT	UINT32_C(0x0)
	/* Off */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_OFF	UINT32_C(0x1)
	/* On */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_ON	UINT32_C(0x2)
	/* Blink */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINK	UINT32_C(0x3)
	/* Blink Alternately */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT	UINT32_C(0x4)
	uint8_t led2_color;
	/* The color of LED #2. */
	/* Default */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_DEFAULT	UINT32_C(0x0)
	/* Amber */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_AMBER	UINT32_C(0x1)
	/* Green */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREEN	UINT32_C(0x2)
	/* Green or Amber */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER	UINT32_C(0x3)
	uint8_t unused_2;
	uint16_t led2_blink_on;
	/*
	 * If the LED #2 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED on
	 * between cycles.
	 */
	uint16_t led2_blink_off;
	/*
	 * If the LED #2 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED off
	 * between cycles.
	 */
	uint8_t led2_group_id;
	/*
	 * An identifier for the group of LEDs that LED #2 belongs to.
	 * If set to 0, then the LED #2 is not grouped. For all other
	 * non-zero values of this field, LED #2 is grouped together
	 * with the LEDs with the same group ID value.
	 */
	uint8_t led3_id;
	/* An identifier for the LED #3. */
	uint8_t led3_type;
	/* The type of LED #3. */
	/* Speed LED */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_SPEED	UINT32_C(0x0)
	/* Activity LED */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_ACTIVITY	UINT32_C(0x1)
	/* Invalid */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID	UINT32_C(0xff)
	uint8_t led3_state;
	/* The current state of the LED #3. */
	/* Default state of the LED */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_DEFAULT	UINT32_C(0x0)
	/* Off */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_OFF	UINT32_C(0x1)
	/* On */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_ON	UINT32_C(0x2)
	/* Blink */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINK	UINT32_C(0x3)
	/* Blink Alternately */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT	UINT32_C(0x4)
	uint8_t led3_color;
	/* The color of LED #3. */
	/* Default */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_DEFAULT	UINT32_C(0x0)
	/* Amber */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_AMBER	UINT32_C(0x1)
	/* Green */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREEN	UINT32_C(0x2)
	/* Green or Amber */
	#define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER	UINT32_C(0x3)
	uint8_t unused_3;
	uint16_t led3_blink_on;
	/*
	 * If the LED #3 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED on
	 * between cycles.
	 */
	uint16_t led3_blink_off;
	/*
	 * If the LED #3 state is "blink" or "blinkalt", then this field
	 * represents the requested time in milliseconds to keep LED off
	 * between cycles.
	 */
	uint8_t led3_group_id;
	/*
	 * An identifier for the group of LEDs that LED #3 belongs to.
	 * If set to 0, then the LED #3 is not grouped. For all other
	 * non-zero values of this field, LED #3 is grouped together
	 * with the LEDs with the same group ID value.
	 */
	uint8_t unused_4;
	uint16_t unused_5;
	uint8_t unused_6;
	uint8_t unused_7;
	uint8_t unused_8;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_port_led_qcaps */
/*
 * Description: This function is used to query capabilities of LEDs on a given
 * port. Each port has individual set of LEDs associated with it. These LEDs are
 * used for speed/link configuration as well as activity indicator
 * configuration.
 */
/* Input	(24 bytes) */
struct hwrm_port_led_qcaps_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t port_id;
	/* Port ID of port whose LED configuration is being queried. */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(48 bytes) */
struct hwrm_port_led_qcaps_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint8_t num_leds;
	/*
	 * The number of LEDs that are configured on this port. Up to 4
	 * LEDs can be returned in the response.
	 */
	uint8_t unused_0[3];
	/* Reserved for future use. */
	uint8_t led0_id;
	/* An identifier for the LED #0. */
	uint8_t led0_type;
	/* The type of LED #0. */
	/* Speed LED */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_SPEED	UINT32_C(0x0)
	/* Activity LED */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_ACTIVITY	UINT32_C(0x1)
	/* Invalid */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID	UINT32_C(0xff)
	uint8_t led0_group_id;
	/*
	 * An identifier for the group of LEDs that LED #0 belongs to.
	 * If set to 0, then the LED #0 cannot be grouped. For all other
	 * non-zero values of this field, LED #0 is grouped together
	 * with the LEDs with the same group ID value.
	 */
	uint8_t unused_1;
	uint16_t led0_state_caps;
	/* The states supported by LED #0. */
	/*
	 * If set to 1, this LED is enabled. If set to 0, this LED is
	 * disabled.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ENABLED UINT32_C(0x1)
	/*
	 * If set to 1, off state is supported on this LED. If set to 0,
	 * off state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_OFF_SUPPORTED  \
		UINT32_C(0x2)
	/*
	 * If set to 1, on state is supported on this LED. If set to 0,
	 * on state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ON_SUPPORTED   \
		UINT32_C(0x4)
	/*
	 * If set to 1, blink state is supported on this LED. If set to
	 * 0, blink state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_SUPPORTED \
		UINT32_C(0x8)
	/*
	 * If set to 1, blink_alt state is supported on this LED. If set
	 * to 0, blink_alt state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_ALT_SUPPORTED \
		UINT32_C(0x10)
	uint16_t led0_color_caps;
	/* The colors supported by LED #0. */
	/* reserved */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_RSVD	UINT32_C(0x1)
	/*
	 * If set to 1, Amber color is supported on this LED. If set to
	 * 0, Amber color is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_AMBER_SUPPORTED \
		UINT32_C(0x2)
	/*
	 * If set to 1, Green color is supported on this LED. If set to
	 * 0, Green color is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_GREEN_SUPPORTED \
		UINT32_C(0x4)
	uint8_t led1_id;
	/* An identifier for the LED #1. */
	uint8_t led1_type;
	/* The type of LED #1. */
	/* Speed LED */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_SPEED	UINT32_C(0x0)
	/* Activity LED */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_ACTIVITY	UINT32_C(0x1)
	/* Invalid */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID	UINT32_C(0xff)
	uint8_t led1_group_id;
	/*
	 * An identifier for the group of LEDs that LED #1 belongs to.
	 * If set to 0, then the LED #0 cannot be grouped. For all other
	 * non-zero values of this field, LED #0 is grouped together
	 * with the LEDs with the same group ID value.
	 */
	uint8_t unused_2;
	uint16_t led1_state_caps;
	/* The states supported by LED #1. */
	/*
	 * If set to 1, this LED is enabled. If set to 0, this LED is
	 * disabled.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ENABLED UINT32_C(0x1)
	/*
	 * If set to 1, off state is supported on this LED. If set to 0,
	 * off state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_OFF_SUPPORTED  \
		UINT32_C(0x2)
	/*
	 * If set to 1, on state is supported on this LED. If set to 0,
	 * on state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ON_SUPPORTED   \
		UINT32_C(0x4)
	/*
	 * If set to 1, blink state is supported on this LED. If set to
	 * 0, blink state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_SUPPORTED \
		UINT32_C(0x8)
	/*
	 * If set to 1, blink_alt state is supported on this LED. If set
	 * to 0, blink_alt state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_ALT_SUPPORTED \
		UINT32_C(0x10)
	uint16_t led1_color_caps;
	/* The colors supported by LED #1. */
	/* reserved */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_RSVD	UINT32_C(0x1)
	/*
	 * If set to 1, Amber color is supported on this LED. If set to
	 * 0, Amber color is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_AMBER_SUPPORTED \
		UINT32_C(0x2)
	/*
	 * If set to 1, Green color is supported on this LED. If set to
	 * 0, Green color is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_GREEN_SUPPORTED \
		UINT32_C(0x4)
	uint8_t led2_id;
	/* An identifier for the LED #2. */
	uint8_t led2_type;
	/* The type of LED #2. */
	/* Speed LED */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_SPEED	UINT32_C(0x0)
	/* Activity LED */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_ACTIVITY	UINT32_C(0x1)
	/* Invalid */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID	UINT32_C(0xff)
	uint8_t led2_group_id;
	/*
	 * An identifier for the group of LEDs that LED #0 belongs to.
	 * If set to 0, then the LED #0 cannot be grouped. For all other
	 * non-zero values of this field, LED #0 is grouped together
	 * with the LEDs with the same group ID value.
	 */
	uint8_t unused_3;
	uint16_t led2_state_caps;
	/* The states supported by LED #2. */
	/*
	 * If set to 1, this LED is enabled. If set to 0, this LED is
	 * disabled.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ENABLED UINT32_C(0x1)
	/*
	 * If set to 1, off state is supported on this LED. If set to 0,
	 * off state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_OFF_SUPPORTED  \
		UINT32_C(0x2)
	/*
	 * If set to 1, on state is supported on this LED. If set to 0,
	 * on state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ON_SUPPORTED   \
		UINT32_C(0x4)
	/*
	 * If set to 1, blink state is supported on this LED. If set to
	 * 0, blink state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_SUPPORTED \
		UINT32_C(0x8)
	/*
	 * If set to 1, blink_alt state is supported on this LED. If set
	 * to 0, blink_alt state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_ALT_SUPPORTED \
		UINT32_C(0x10)
	uint16_t led2_color_caps;
	/* The colors supported by LED #2. */
	/* reserved */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_RSVD	UINT32_C(0x1)
	/*
	 * If set to 1, Amber color is supported on this LED. If set to
	 * 0, Amber color is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_AMBER_SUPPORTED \
		UINT32_C(0x2)
	/*
	 * If set to 1, Green color is supported on this LED. If set to
	 * 0, Green color is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_GREEN_SUPPORTED \
		UINT32_C(0x4)
	uint8_t led3_id;
	/* An identifier for the LED #3. */
	uint8_t led3_type;
	/* The type of LED #3. */
	/* Speed LED */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_SPEED	UINT32_C(0x0)
	/* Activity LED */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_ACTIVITY	UINT32_C(0x1)
	/* Invalid */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID	UINT32_C(0xff)
	uint8_t led3_group_id;
	/*
	 * An identifier for the group of LEDs that LED #3 belongs to.
	 * If set to 0, then the LED #0 cannot be grouped. For all other
	 * non-zero values of this field, LED #0 is grouped together
	 * with the LEDs with the same group ID value.
	 */
	uint8_t unused_4;
	uint16_t led3_state_caps;
	/* The states supported by LED #3. */
	/*
	 * If set to 1, this LED is enabled. If set to 0, this LED is
	 * disabled.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ENABLED UINT32_C(0x1)
	/*
	 * If set to 1, off state is supported on this LED. If set to 0,
	 * off state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_OFF_SUPPORTED  \
		UINT32_C(0x2)
	/*
	 * If set to 1, on state is supported on this LED. If set to 0,
	 * on state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ON_SUPPORTED   \
		UINT32_C(0x4)
	/*
	 * If set to 1, blink state is supported on this LED. If set to
	 * 0, blink state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_SUPPORTED \
		UINT32_C(0x8)
	/*
	 * If set to 1, blink_alt state is supported on this LED. If set
	 * to 0, blink_alt state is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_ALT_SUPPORTED \
		UINT32_C(0x10)
	uint16_t led3_color_caps;
	/* The colors supported by LED #3. */
	/* reserved */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_RSVD	UINT32_C(0x1)
	/*
	 * If set to 1, Amber color is supported on this LED. If set to
	 * 0, Amber color is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_AMBER_SUPPORTED \
		UINT32_C(0x2)
	/*
	 * If set to 1, Green color is supported on this LED. If set to
	 * 0, Green color is not supported on this LED.
	 */
	#define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_GREEN_SUPPORTED \
		UINT32_C(0x4)
	uint8_t unused_5;
	uint8_t unused_6;
	uint8_t unused_7;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_queue_qportcfg */
/*
 * Description: This function is called by a driver to query queue configuration
 * of a port. # The HWRM shall at least advertise one queue with lossy service
 * profile. # The driver shall use this command to query queue ids before
 * configuring or using any queues. # If a service profile is not set for a
 * queue, then the driver shall not use that queue without configuring a service
 * profile for it. # If the driver is not allowed to configure service profiles,
 * then the driver shall only use queues for which service profiles are pre-
 * configured.
 */
/* Input	(24 bytes) */
struct hwrm_queue_qportcfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t flags;
	/*
	 * Enumeration denoting the RX, TX type of the resource. This
	 * enumeration is used for resources that are similar for both
	 * TX and RX paths of the chip.
	 */
	#define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH	UINT32_C(0x1)
	/* tx path */
	#define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX	UINT32_C(0x0)
	/* rx path */
	#define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX	UINT32_C(0x1)
	#define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \
		QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
	uint16_t port_id;
	/*
	 * Port ID of port for which the queue configuration is being
	 * queried. This field is only required when sent by IPC.
	 */
	uint16_t unused_0;
} __attribute__((packed));

/* Output	(32 bytes) */
struct hwrm_queue_qportcfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint8_t max_configurable_queues;
	/*
	 * The maximum number of queues that can be configured on this
	 * port. Valid values range from 1 through 8.
	 */
	uint8_t max_configurable_lossless_queues;
	/*
	 * The maximum number of lossless queues that can be configured
	 * on this port. Valid values range from 0 through 8.
	 */
	uint8_t queue_cfg_allowed;
	/*
	 * Bitmask indicating which queues can be configured by the
	 * hwrm_queue_cfg command. Each bit represents a specific queue
	 * where bit 0 represents queue 0 and bit 7 represents queue 7.
	 * # A value of 0 indicates that the queue is not configurable
	 * by the hwrm_queue_cfg command. # A value of 1 indicates that
	 * the queue is configurable. # A hwrm_queue_cfg command shall
	 * return error when trying to configure a queue not
	 * configurable.
	 */
	uint8_t queue_cfg_info;
	/* Information about queue configuration. */
	/*
	 * If this flag is set to '1', then the queues are configured
	 * asymmetrically on TX and RX sides. If this flag is set to
	 * '0', then the queues are configured symmetrically on TX and
	 * RX sides. For symmetric configuration, the queue
	 * configuration including queue ids and service profiles on the
	 * TX side is the same as the corresponding queue configuration
	 * on the RX side.
	 */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG UINT32_C(0x1)
	uint8_t queue_pfcenable_cfg_allowed;
	/*
	 * Bitmask indicating which queues can be configured by the
	 * hwrm_queue_pfcenable_cfg command. Each bit represents a
	 * specific priority where bit 0 represents priority 0 and bit 7
	 * represents priority 7. # A value of 0 indicates that the
	 * priority is not configurable by the hwrm_queue_pfcenable_cfg
	 * command. # A value of 1 indicates that the priority is
	 * configurable. # A hwrm_queue_pfcenable_cfg command shall
	 * return error when trying to configure a priority that is not
	 * configurable.
	 */
	uint8_t queue_pri2cos_cfg_allowed;
	/*
	 * Bitmask indicating which queues can be configured by the
	 * hwrm_queue_pri2cos_cfg command. Each bit represents a
	 * specific queue where bit 0 represents queue 0 and bit 7
	 * represents queue 7. # A value of 0 indicates that the queue
	 * is not configurable by the hwrm_queue_pri2cos_cfg command. #
	 * A value of 1 indicates that the queue is configurable. # A
	 * hwrm_queue_pri2cos_cfg command shall return error when trying
	 * to configure a queue that is not configurable.
	 */
	uint8_t queue_cos2bw_cfg_allowed;
	/*
	 * Bitmask indicating which queues can be configured by the
	 * hwrm_queue_pri2cos_cfg command. Each bit represents a
	 * specific queue where bit 0 represents queue 0 and bit 7
	 * represents queue 7. # A value of 0 indicates that the queue
	 * is not configurable by the hwrm_queue_pri2cos_cfg command. #
	 * A value of 1 indicates that the queue is configurable. # A
	 * hwrm_queue_pri2cos_cfg command shall return error when trying
	 * to configure a queue not configurable.
	 */
	uint8_t queue_id0;
	/*
	 * ID of CoS Queue 0. FF - Invalid id # This ID can be used on
	 * any subsequent call to an hwrm command that takes a queue id.
	 * # IDs must always be queried by this command before any use
	 * by the driver or software. # Any driver or software should
	 * not make any assumptions about queue IDs. # A value of 0xff
	 * indicates that the queue is not available. # Available queues
	 * may not be in sequential order.
	 */
	uint8_t queue_id0_service_profile;
	/* This value is applicable to CoS queues only. */
	/* Lossy	(best-effort) */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \
		UINT32_C(0x0)
	/* Lossless */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \
		UINT32_C(0x1)
	/*
	 * Set to 0xFF...	(All Fs) if there is no
	 * service profile specified
	 */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \
		UINT32_C(0xff)
	uint8_t queue_id1;
	/*
	 * ID of CoS Queue 1. FF - Invalid id # This ID can be used on
	 * any subsequent call to an hwrm command that takes a queue id.
	 * # IDs must always be queried by this command before any use
	 * by the driver or software. # Any driver or software should
	 * not make any assumptions about queue IDs. # A value of 0xff
	 * indicates that the queue is not available. # Available queues
	 * may not be in sequential order.
	 */
	uint8_t queue_id1_service_profile;
	/* This value is applicable to CoS queues only. */
	/* Lossy	(best-effort) */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \
		UINT32_C(0x0)
	/* Lossless */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \
		UINT32_C(0x1)
	/*
	 * Set to 0xFF...	(All Fs) if there is no
	 * service profile specified
	 */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \
		UINT32_C(0xff)
	uint8_t queue_id2;
	/*
	 * ID of CoS Queue 2. FF - Invalid id # This ID can be used on
	 * any subsequent call to an hwrm command that takes a queue id.
	 * # IDs must always be queried by this command before any use
	 * by the driver or software. # Any driver or software should
	 * not make any assumptions about queue IDs. # A value of 0xff
	 * indicates that the queue is not available. # Available queues
	 * may not be in sequential order.
	 */
	uint8_t queue_id2_service_profile;
	/* This value is applicable to CoS queues only. */
	/* Lossy	(best-effort) */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \
		UINT32_C(0x0)
	/* Lossless */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \
		UINT32_C(0x1)
	/*
	 * Set to 0xFF...	(All Fs) if there is no
	 * service profile specified
	 */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \
		UINT32_C(0xff)
	uint8_t queue_id3;
	/*
	 * ID of CoS Queue 3. FF - Invalid id # This ID can be used on
	 * any subsequent call to an hwrm command that takes a queue id.
	 * # IDs must always be queried by this command before any use
	 * by the driver or software. # Any driver or software should
	 * not make any assumptions about queue IDs. # A value of 0xff
	 * indicates that the queue is not available. # Available queues
	 * may not be in sequential order.
	 */
	uint8_t queue_id3_service_profile;
	/* This value is applicable to CoS queues only. */
	/* Lossy	(best-effort) */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \
		UINT32_C(0x0)
	/* Lossless */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \
		UINT32_C(0x1)
	/*
	 * Set to 0xFF...	(All Fs) if there is no
	 * service profile specified
	 */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \
		UINT32_C(0xff)
	uint8_t queue_id4;
	/*
	 * ID of CoS Queue 4. FF - Invalid id # This ID can be used on
	 * any subsequent call to an hwrm command that takes a queue id.
	 * # IDs must always be queried by this command before any use
	 * by the driver or software. # Any driver or software should
	 * not make any assumptions about queue IDs. # A value of 0xff
	 * indicates that the queue is not available. # Available queues
	 * may not be in sequential order.
	 */
	uint8_t queue_id4_service_profile;
	/* This value is applicable to CoS queues only. */
	/* Lossy	(best-effort) */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \
		UINT32_C(0x0)
	/* Lossless */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \
		UINT32_C(0x1)
	/*
	 * Set to 0xFF...	(All Fs) if there is no
	 * service profile specified
	 */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \
		UINT32_C(0xff)
	uint8_t queue_id5;
	/*
	 * ID of CoS Queue 5. FF - Invalid id # This ID can be used on
	 * any subsequent call to an hwrm command that takes a queue id.
	 * # IDs must always be queried by this command before any use
	 * by the driver or software. # Any driver or software should
	 * not make any assumptions about queue IDs. # A value of 0xff
	 * indicates that the queue is not available. # Available queues
	 * may not be in sequential order.
	 */
	uint8_t queue_id5_service_profile;
	/* This value is applicable to CoS queues only. */
	/* Lossy	(best-effort) */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \
		UINT32_C(0x0)
	/* Lossless */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \
		UINT32_C(0x1)
	/*
	 * Set to 0xFF...	(All Fs) if there is no
	 * service profile specified
	 */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \
		UINT32_C(0xff)
	uint8_t queue_id6;
	/*
	 * ID of CoS Queue 6. FF - Invalid id # This ID can be used on
	 * any subsequent call to an hwrm command that takes a queue id.
	 * # IDs must always be queried by this command before any use
	 * by the driver or software. # Any driver or software should
	 * not make any assumptions about queue IDs. # A value of 0xff
	 * indicates that the queue is not available. # Available queues
	 * may not be in sequential order.
	 */
	uint8_t queue_id6_service_profile;
	/* This value is applicable to CoS queues only. */
	/* Lossy	(best-effort) */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \
		UINT32_C(0x0)
	/* Lossless */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \
		UINT32_C(0x1)
	/*
	 * Set to 0xFF...	(All Fs) if there is no
	 * service profile specified
	 */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \
		UINT32_C(0xff)
	uint8_t queue_id7;
	/*
	 * ID of CoS Queue 7. FF - Invalid id # This ID can be used on
	 * any subsequent call to an hwrm command that takes a queue id.
	 * # IDs must always be queried by this command before any use
	 * by the driver or software. # Any driver or software should
	 * not make any assumptions about queue IDs. # A value of 0xff
	 * indicates that the queue is not available. # Available queues
	 * may not be in sequential order.
	 */
	uint8_t queue_id7_service_profile;
	/* This value is applicable to CoS queues only. */
	/* Lossy	(best-effort) */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \
		UINT32_C(0x0)
	/* Lossless */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \
		UINT32_C(0x1)
	/*
	 * Set to 0xFF...	(All Fs) if there is no
	 * service profile specified
	 */
	#define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \
		UINT32_C(0xff)
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_vnic_alloc */
/*
 * Description: This VNIC is a resource in the RX side of the chip that is used
 * to represent a virtual host "interface". # At the time of VNIC allocation or
 * configuration, the function can specify whether it wants the requested VNIC
 * to be the default VNIC for the function or not. # If a function requests
 * allocation of a VNIC for the first time and a VNIC is successfully allocated
 * by the HWRM, then the HWRM shall make the allocated VNIC as the default VNIC
 * for that function. # The default VNIC shall be used for the default action
 * for a partition or function. # For each VNIC allocated on a function, a
 * mapping on the RX side to map the allocated VNIC to source virtual interface
 * shall be performed by the HWRM. This should be hidden to the function driver
 * requesting the VNIC allocation. This enables broadcast/multicast replication
 * with source knockout. # If multicast replication with source knockout is
 * enabled, then the internal VNIC to SVIF mapping data structures shall be
 * programmed at the time of VNIC allocation.
 */
/* Input	(24 bytes) */
struct hwrm_vnic_alloc_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t flags;
	/*
	 * When this bit is '1', this VNIC is requested to be the
	 * default VNIC for this function.
	 */
	#define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT	UINT32_C(0x1)
	uint32_t unused_0;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_vnic_alloc_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t vnic_id;
	/* Logical vnic ID */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_vnic_free */
/*
 * Description: Free a VNIC resource. Idle any resources associated with the
 * VNIC as well as the VNIC. Reset and release all resources associated with the
 * VNIC.
 */
/* Input	(24 bytes) */
struct hwrm_vnic_free_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t vnic_id;
	/* Logical vnic ID */
	uint32_t unused_0;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_vnic_free_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_vnic_cfg */
/* Description: Configure the RX VNIC structure. */
/* Input	(40 bytes) */
struct hwrm_vnic_cfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t flags;
	/*
	 * When this bit is '1', the VNIC is requested to be the default
	 * VNIC for the function.
	 */
	#define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT	UINT32_C(0x1)
	/*
	 * When this bit is '1', the VNIC is being configured to strip
	 * VLAN in the RX path. If set to '0', then VLAN stripping is
	 * disabled on this VNIC.
	 */
	#define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE	UINT32_C(0x2)
	/*
	 * When this bit is '1', the VNIC is being configured to buffer
	 * receive packets in the hardware until the host posts new
	 * receive buffers. If set to '0', then bd_stall is being
	 * configured to be disabled on this VNIC.
	 */
	#define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE	UINT32_C(0x4)
	/*
	 * When this bit is '1', the VNIC is being configured to receive
	 * both RoCE and non-RoCE traffic. If set to '0', then this VNIC
	 * is not configured to be operating in dual VNIC mode.
	 */
	#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE	UINT32_C(0x8)
	/*
	 * When this flag is set to '1', the VNIC is requested to be
	 * configured to receive only RoCE traffic. If this flag is set
	 * to '0', then this flag shall be ignored by the HWRM. If
	 * roce_dual_vnic_mode flag is set to '1', then the HWRM client
	 * shall not set this flag to '1'.
	 */
	#define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
	/*
	 * When a VNIC uses one destination ring group for certain
	 * application	(e.g. Receive Flow Steering) where exact match is
	 * used to direct packets to a VNIC with one destination ring
	 * group only, there is no need to configure RSS indirection
	 * table for that VNIC as only one destination ring group is
	 * used. This flag is used to enable a mode where RSS is enabled
	 * in the VNIC using a RSS context for computing RSS hash but
	 * the RSS indirection table is not configured using
	 * hwrm_vnic_rss_cfg. If this mode is enabled, then the driver
	 * should not program RSS indirection table for the RSS context
	 * that is used for computing RSS hash only.
	 */
	#define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE	UINT32_C(0x20)
	uint32_t enables;
	/*
	 * This bit must be '1' for the dflt_ring_grp field to be
	 * configured.
	 */
	#define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP	UINT32_C(0x1)
	/* This bit must be '1' for the rss_rule field to be configured. */
	#define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE	UINT32_C(0x2)
	/* This bit must be '1' for the cos_rule field to be configured. */
	#define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE	UINT32_C(0x4)
	/* This bit must be '1' for the lb_rule field to be configured. */
	#define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE	UINT32_C(0x8)
	/* This bit must be '1' for the mru field to be configured. */
	#define HWRM_VNIC_CFG_INPUT_ENABLES_MRU	UINT32_C(0x10)
	uint16_t vnic_id;
	/* Logical vnic ID */
	uint16_t dflt_ring_grp;
	/*
	 * Default Completion ring for the VNIC. This ring will be
	 * chosen if packet does not match any RSS rules and if there is
	 * no COS rule.
	 */
	uint16_t rss_rule;
	/*
	 * RSS ID for RSS rule/table structure. 0xFF...	(All Fs) if
	 * there is no RSS rule.
	 */
	uint16_t cos_rule;
	/*
	 * RSS ID for COS rule/table structure. 0xFF...	(All Fs) if
	 * there is no COS rule.
	 */
	uint16_t lb_rule;
	/*
	 * RSS ID for load balancing rule/table structure. 0xFF...	(All
	 * Fs) if there is no LB rule.
	 */
	uint16_t mru;
	/*
	 * The maximum receive unit of the vnic. Each vnic is associated
	 * with a function. The vnic mru value overwrites the mru
	 * setting of the associated function. The HWRM shall make sure
	 * that vnic mru does not exceed the mru of the port the
	 * function is associated with.
	 */
	uint32_t unused_0;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_vnic_cfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_vnic_qcfg */
/*
 * Description: Query the RX VNIC structure. This function can be used by a PF
 * driver to query its own VNIC resource or VNIC resource of its child VF. This
 * function can also be used by a VF driver to query its own VNIC resource.
 */
/* Input	(32 bytes) */
struct hwrm_vnic_qcfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t enables;
	/* This bit must be '1' for the vf_id_valid field to be configured. */
	#define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID	UINT32_C(0x1)
	uint32_t vnic_id;
	/* Logical vnic ID */
	uint16_t vf_id;
	/* ID of Virtual Function whose VNIC resource is being queried. */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(32 bytes) */
struct hwrm_vnic_qcfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint16_t dflt_ring_grp;
	/* Default Completion ring for the VNIC. */
	uint16_t rss_rule;
	/*
	 * RSS ID for RSS rule/table structure. 0xFF...	(All Fs) if
	 * there is no RSS rule.
	 */
	uint16_t cos_rule;
	/*
	 * RSS ID for COS rule/table structure. 0xFF...	(All Fs) if
	 * there is no COS rule.
	 */
	uint16_t lb_rule;
	/*
	 * RSS ID for load balancing rule/table structure. 0xFF...	(All
	 * Fs) if there is no LB rule.
	 */
	uint16_t mru;
	/* The maximum receive unit of the vnic. */
	uint8_t unused_0;
	uint8_t unused_1;
	uint32_t flags;
	/*
	 * When this bit is '1', the VNIC is the default VNIC for the
	 * function.
	 */
	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT	UINT32_C(0x1)
	/*
	 * When this bit is '1', the VNIC is configured to strip VLAN in
	 * the RX path. If set to '0', then VLAN stripping is disabled
	 * on this VNIC.
	 */
	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE	UINT32_C(0x2)
	/*
	 * When this bit is '1', the VNIC is configured to buffer
	 * receive packets in the hardware until the host posts new
	 * receive buffers. If set to '0', then bd_stall is disabled on
	 * this VNIC.
	 */
	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE	UINT32_C(0x4)
	/*
	 * When this bit is '1', the VNIC is configured to receive both
	 * RoCE and non-RoCE traffic. If set to '0', then this VNIC is
	 * not configured to operate in dual VNIC mode.
	 */
	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE	UINT32_C(0x8)
	/*
	 * When this flag is set to '1', the VNIC is configured to
	 * receive only RoCE traffic. When this flag is set to '0', the
	 * VNIC is not configured to receive only RoCE traffic. If
	 * roce_dual_vnic_mode flag and this flag both are set to '1',
	 * then it is an invalid configuration of the VNIC. The HWRM
	 * should not allow that type of mis-configuration by HWRM
	 * clients.
	 */
	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE	UINT32_C(0x10)
	/*
	 * When a VNIC uses one destination ring group for certain
	 * application	(e.g. Receive Flow Steering) where exact match is
	 * used to direct packets to a VNIC with one destination ring
	 * group only, there is no need to configure RSS indirection
	 * table for that VNIC as only one destination ring group is
	 * used. When this bit is set to '1', then the VNIC is enabled
	 * in a mode where RSS is enabled in the VNIC using a RSS
	 * context for computing RSS hash but the RSS indirection table
	 * is not configured.
	 */
	#define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE	UINT32_C(0x20)
	uint32_t unused_2;
	uint8_t unused_3;
	uint8_t unused_4;
	uint8_t unused_5;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_vnic_rss_cfg */
/* Description: This function is used to enable RSS configuration. */
/* Input	(48 bytes) */
struct hwrm_vnic_rss_cfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t hash_type;
	/*
	 * When this bit is '1', the RSS hash shall be computed over
	 * source and destination IPv4 addresses of IPv4 packets.
	 */
	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4	UINT32_C(0x1)
	/*
	 * When this bit is '1', the RSS hash shall be computed over
	 * source/destination IPv4 addresses and source/destination
	 * ports of TCP/IPv4 packets.
	 */
	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4	UINT32_C(0x2)
	/*
	 * When this bit is '1', the RSS hash shall be computed over
	 * source/destination IPv4 addresses and source/destination
	 * ports of UDP/IPv4 packets.
	 */
	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4	UINT32_C(0x4)
	/*
	 * When this bit is '1', the RSS hash shall be computed over
	 * source and destination IPv4 addresses of IPv6 packets.
	 */
	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6	UINT32_C(0x8)
	/*
	 * When this bit is '1', the RSS hash shall be computed over
	 * source/destination IPv6 addresses and source/destination
	 * ports of TCP/IPv6 packets.
	 */
	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6	UINT32_C(0x10)
	/*
	 * When this bit is '1', the RSS hash shall be computed over
	 * source/destination IPv6 addresses and source/destination
	 * ports of UDP/IPv6 packets.
	 */
	#define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6	UINT32_C(0x20)
	uint32_t unused_0;
	uint64_t ring_grp_tbl_addr;
	/* This is the address for rss ring group table */
	uint64_t hash_key_tbl_addr;
	/* This is the address for rss hash key table */
	uint16_t rss_ctx_idx;
	/* Index to the rss indirection table. */
	uint16_t unused_1[3];
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_vnic_rss_cfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_vnic_plcmodes_cfg */
/*
 * Description: This function can be used to set placement mode configuration of
 * the VNIC.
 */
/* Input (40 bytes) */

struct hwrm_vnic_plcmodes_cfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format for the
	 * rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request will be
	 * optionally completed on. If the value is -1, then no CR completion
	 * will be generated. Any other value must be a valid CR ring_id value
	 * for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
	 * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written when the
	 * request is complete. This area must be 16B aligned and must be
	 * cleared to zero before the request is made.
	 */
	uint32_t flags;
	/*
	 * When this bit is '1', the VNIC shall be configured to use regular
	 * placement algorithm. By default, the regular placement algorithm
	 * shall be enabled on the VNIC.
	 */
	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \
		UINT32_C(0x1)
	/*
	 * When this bit is '1', the VNIC shall be configured use the jumbo
	 * placement algorithm.
	 */
	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \
		UINT32_C(0x2)
	/*
	 * When this bit is '1', the VNIC shall be configured to enable Header-
	 * Data split for IPv4 packets according to the following rules: # If
	 * the packet is identified as TCP/IPv4, then the packet is split at the
	 * beginning of the TCP payload. # If the packet is identified as
	 * UDP/IPv4, then the packet is split at the beginning of UDP payload. #
	 * If the packet is identified as non-TCP and non-UDP IPv4 packet, then
	 * the packet is split at the beginning of the upper layer protocol
	 * header carried in the IPv4 packet.
	 */
	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4        UINT32_C(0x4)
	/*
	 * When this bit is '1', the VNIC shall be configured to enable Header-
	 * Data split for IPv6 packets according to the following rules: # If
	 * the packet is identified as TCP/IPv6, then the packet is split at the
	 * beginning of the TCP payload. # If the packet is identified as
	 * UDP/IPv6, then the packet is split at the beginning of UDP payload. #
	 * If the packet is identified as non-TCP and non-UDP IPv6 packet, then
	 * the packet is split at the beginning of the upper layer protocol
	 * header carried in the IPv6 packet.
	 */
	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6        UINT32_C(0x8)
	/*
	 * When this bit is '1', the VNIC shall be configured to enable Header-
	 * Data split for FCoE packets at the beginning of FC payload.
	 */
	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE       UINT32_C(0x10)
	/*
	 * When this bit is '1', the VNIC shall be configured to enable Header-
	 * Data split for RoCE packets at the beginning of RoCE payload (after
	 * BTH/GRH headers).
	 */
	#define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE       UINT32_C(0x20)
	uint32_t enables;
	/*
	 * This bit must be '1' for the jumbo_thresh_valid field to be
	 * configured.
	 */
	#define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \
		UINT32_C(0x1)
	/*
	 * This bit must be '1' for the hds_offset_valid field to be configured.
	 */
	#define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \
		UINT32_C(0x2)
	/*
	 * This bit must be '1' for the hds_threshold_valid field to be
	 * configured.
	 */
	#define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \
		UINT32_C(0x4)
	uint32_t vnic_id;
	/* Logical vnic ID */
	uint16_t jumbo_thresh;
	/*
	 * When jumbo placement algorithm is enabled, this value is used to
	 * determine the threshold for jumbo placement. Packets with length
	 * larger than this value will be placed according to the jumbo
	 * placement algorithm.
	 */
	uint16_t hds_offset;
	/*
	 * This value is used to determine the offset into packet buffer where
	 * the split data (payload) will be placed according to one of of HDS
	 * placement algorithm. The lengths of packet buffers provided for split
	 * data shall be larger than this value.
	 */
	uint16_t hds_threshold;
	/*
	 * When one of the HDS placement algorithm is enabled, this value is
	 * used to determine the threshold for HDS placement. Packets with
	 * length larger than this value will be placed according to the HDS
	 * placement algorithm. This value shall be in multiple of 4 bytes.
	 */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output (16 bytes) */

struct hwrm_vnic_plcmodes_cfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in parameters,
	 * and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last byte of
	 * the response is a valid flag that will read as '1' when the command
	 * has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the output is
	 * completely written to RAM. This field should be read as '1' to
	 * indicate that the output has been completely written. When writing a
	 * command completion or response to an internal processor, the order of
	 * writes has to be such that this field is written last.
	 */
} __attribute__((packed));

/* hwrm_vnic_plcmodes_qcfg */
/*
 * Description: This function can be used to query placement mode configuration
 * of the VNIC.
 */
/* Input (24 bytes) */

struct hwrm_vnic_plcmodes_qcfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format for the
	 * rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request will be
	 * optionally completed on. If the value is -1, then no CR completion
	 * will be generated. Any other value must be a valid CR ring_id value
	 * for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
	 * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written when the
	 * request is complete. This area must be 16B aligned and must be
	 * cleared to zero before the request is made.
	 */
	uint32_t vnic_id;
	/* Logical vnic ID */
	uint32_t unused_0;
} __attribute__((packed));

/* Output (24 bytes) */

struct hwrm_vnic_plcmodes_qcfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in parameters,
	 * and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last byte of
	 * the response is a valid flag that will read as '1' when the command
	 * has been completely written to memory.
	 */
	uint32_t flags;
	/*
	 * When this bit is '1', the VNIC is configured to use regular placement
	 * algorithm.
	 */
	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \
		UINT32_C(0x1)
	/*
	 * When this bit is '1', the VNIC is configured to use the jumbo
	 * placement algorithm.
	 */
	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \
		UINT32_C(0x2)
	/*
	 * When this bit is '1', the VNIC is configured to enable Header-Data
	 * split for IPv4 packets.
	 */
	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4      UINT32_C(0x4)
	/*
	 * When this bit is '1', the VNIC is configured to enable Header-Data
	 * split for IPv6 packets.
	 */
	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6      UINT32_C(0x8)
	/*
	 * When this bit is '1', the VNIC is configured to enable Header-Data
	 * split for FCoE packets.
	 */
	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE     UINT32_C(0x10)
	/*
	 * When this bit is '1', the VNIC is configured to enable Header-Data
	 * split for RoCE packets.
	 */
	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE     UINT32_C(0x20)
	/*
	 * When this bit is '1', the VNIC is configured to be the default VNIC
	 * of the requesting function.
	 */
	#define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC    UINT32_C(0x40)
	uint16_t jumbo_thresh;
	/*
	 * When jumbo placement algorithm is enabled, this value is used to
	 * determine the threshold for jumbo placement. Packets with length
	 * larger than this value will be placed according to the jumbo
	 * placement algorithm.
	 */
	uint16_t hds_offset;
	/*
	 * This value is used to determine the offset into packet buffer where
	 * the split data (payload) will be placed according to one of of HDS
	 * placement algorithm. The lengths of packet buffers provided for split
	 * data shall be larger than this value.
	 */
	uint16_t hds_threshold;
	/*
	 * When one of the HDS placement algorithm is enabled, this value is
	 * used to determine the threshold for HDS placement. Packets with
	 * length larger than this value will be placed according to the HDS
	 * placement algorithm. This value shall be in multiple of 4 bytes.
	 */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t unused_4;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the output is
	 * completely written to RAM. This field should be read as '1' to
	 * indicate that the output has been completely written. When writing a
	 * command completion or response to an internal processor, the order of
	 * writes has to be such that this field is written last.
	 */
} __attribute__((packed));

/* hwrm_vnic_rss_cos_lb_ctx_alloc */
/* Description: This function is used to allocate COS/Load Balance context. */
/* Input	(16 bytes) */
struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint16_t rss_cos_lb_ctx_id;
	/* rss_cos_lb_ctx_id is 16 b */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t unused_4;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_vnic_rss_cos_lb_ctx_free */
/* Description: This function can be used to free COS/Load Balance context. */
/* Input	(24 bytes) */
struct hwrm_vnic_rss_cos_lb_ctx_free_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t rss_cos_lb_ctx_id;
	/* rss_cos_lb_ctx_id is 16 b */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_vnic_rss_cos_lb_ctx_free_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_vnic_tpa_cfg */
/* Description: This function is used to enable/configure TPA on the VNIC. */
/* Input	(40 bytes) */
struct hwrm_vnic_tpa_cfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t flags;
	/*
	 * When this bit is '1', the VNIC shall be configured to perform
	 * transparent packet aggregation	(TPA) of non-tunneled TCP
	 * packets.
	 */
	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA	UINT32_C(0x1)
	/*
	 * When this bit is '1', the VNIC shall be configured to perform
	 * transparent packet aggregation	(TPA) of tunneled TCP packets.
	 */
	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA	UINT32_C(0x2)
	/*
	 * When this bit is '1', the VNIC shall be configured to perform
	 * transparent packet aggregation	(TPA) according to Windows
	 * Receive Segment Coalescing	(RSC) rules.
	 */
	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE	UINT32_C(0x4)
	/*
	 * When this bit is '1', the VNIC shall be configured to perform
	 * transparent packet aggregation	(TPA) according to Linux
	 * Generic Receive Offload	(GRO) rules.
	 */
	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO	UINT32_C(0x8)
	/*
	 * When this bit is '1', the VNIC shall be configured to perform
	 * transparent packet aggregation	(TPA) for TCP packets with IP
	 * ECN set to non-zero.
	 */
	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN	UINT32_C(0x10)
	/*
	 * When this bit is '1', the VNIC shall be configured to perform
	 * transparent packet aggregation	(TPA) for GRE tunneled TCP
	 * packets only if all packets have the same GRE sequence.
	 */
	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ	\
		UINT32_C(0x20)
	/*
	 * When this bit is '1' and the GRO mode is enabled, the VNIC
	 * shall be configured to perform transparent packet aggregation
	 *	(TPA) for TCP/IPv4 packets with consecutively increasing
	 * IPIDs. In other words, the last packet that is being
	 * aggregated to an already existing aggregation context shall
	 * have IPID 1 more than the IPID of the last packet that was
	 * aggregated in that aggregation context.
	 */
	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK	UINT32_C(0x40)
	/*
	 * When this bit is '1' and the GRO mode is enabled, the VNIC
	 * shall be configured to perform transparent packet aggregation
	 *	(TPA) for TCP packets with the same TTL	(IPv4) or Hop limit
	 *	(IPv6) value.
	 */
	#define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK	UINT32_C(0x80)
	uint32_t enables;
	/* This bit must be '1' for the max_agg_segs field to be configured. */
	#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS	UINT32_C(0x1)
	/* This bit must be '1' for the max_aggs field to be configured. */
	#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS	UINT32_C(0x2)
	/*
	 * This bit must be '1' for the max_agg_timer field to be
	 * configured.
	 */
	#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER	UINT32_C(0x4)
	/* This bit must be '1' for the min_agg_len field to be configured. */
	#define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN	UINT32_C(0x8)
	uint16_t vnic_id;
	/* Logical vnic ID */
	uint16_t max_agg_segs;
	/*
	 * This is the maximum number of TCP segments that can be
	 * aggregated	(unit is Log2). Max value is 31.
	 */
	/* 1 segment */
	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1	UINT32_C(0x0)
	/* 2 segments */
	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2	UINT32_C(0x1)
	/* 4 segments */
	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4	UINT32_C(0x2)
	/* 8 segments */
	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8	UINT32_C(0x3)
	/* Any segment size larger than this is not valid */
	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX	UINT32_C(0x1f)
	uint16_t max_aggs;
	/*
	 * This is the maximum number of aggregations this VNIC is
	 * allowed	(unit is Log2). Max value is 7
	 */
	/* 1 aggregation */
	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1	UINT32_C(0x0)
	/* 2 aggregations */
	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2	UINT32_C(0x1)
	/* 4 aggregations */
	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4	UINT32_C(0x2)
	/* 8 aggregations */
	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8	UINT32_C(0x3)
	/* 16 aggregations */
	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16	UINT32_C(0x4)
	/* Any aggregation size larger than this is not valid */
	#define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX	UINT32_C(0x7)
	uint8_t unused_0;
	uint8_t unused_1;
	uint32_t max_agg_timer;
	/*
	 * This is the maximum amount of time allowed for an aggregation
	 * context to complete after it was initiated.
	 */
	uint32_t min_agg_len;
	/*
	 * This is the minimum amount of payload length required to
	 * start an aggregation context.
	 */
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_vnic_tpa_cfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_ring_alloc */
/*
 * Description: This command allocates and does basic preparation for a ring.
 */
/* Input	(80 bytes) */
struct hwrm_ring_alloc_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t enables;
	/* This bit must be '1' for the Reserved1 field to be configured. */
	#define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED1	UINT32_C(0x1)
	/* This bit must be '1' for the ring_arb_cfg field to be configured. */
	#define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG	UINT32_C(0x2)
	/* This bit must be '1' for the Reserved3 field to be configured. */
	#define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED3	UINT32_C(0x4)
	/*
	 * This bit must be '1' for the stat_ctx_id_valid field to be
	 * configured.
	 */
	#define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID	UINT32_C(0x8)
	/* This bit must be '1' for the Reserved4 field to be configured. */
	#define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED4	UINT32_C(0x10)
	/* This bit must be '1' for the max_bw_valid field to be configured. */
	#define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID	UINT32_C(0x20)
	uint8_t ring_type;
	/* Ring Type. */
	/* L2 Completion Ring	(CR) */
	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL	UINT32_C(0x0)
	/* TX Ring	(TR) */
	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX	UINT32_C(0x1)
	/* RX Ring	(RR) */
	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX	UINT32_C(0x2)
	/* RoCE Notification Completion Ring	(ROCE_CR) */
	#define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL	UINT32_C(0x3)
	uint8_t unused_0;
	uint16_t unused_1;
	uint64_t page_tbl_addr;
	/* This value is a pointer to the page table for the Ring. */
	uint32_t fbo;
	/* First Byte Offset of the first entry in the first page. */
	uint8_t page_size;
	/*
	 * Actual page size in 2^page_size. The supported range is
	 * increments in powers of 2 from 16 bytes to 1GB. - 4 = 16 B
	 * Page size is 16 B. - 12 = 4 KB Page size is 4 KB. - 13 = 8 KB
	 * Page size is 8 KB. - 16 = 64 KB Page size is 64 KB. - 21 = 2
	 * MB Page size is 2 MB. - 22 = 4 MB Page size is 4 MB. - 30 = 1
	 * GB Page size is 1 GB.
	 */
	uint8_t page_tbl_depth;
	/*
	 * This value indicates the depth of page table. For this
	 * version of the specification, value other than 0 or 1 shall
	 * be considered as an invalid value. When the page_tbl_depth =
	 * 0, then it is treated as a special case with the following.
	 * 1. FBO and page size fields are not valid. 2. page_tbl_addr
	 * is the physical address of the first element of the ring.
	 */
	uint8_t unused_2;
	uint8_t unused_3;
	uint32_t length;
	/*
	 * Number of 16B units in the ring. Minimum size for a ring is
	 * 16 16B entries.
	 */
	uint16_t logical_id;
	/*
	 * Logical ring number for the ring to be allocated. This value
	 * determines the position in the doorbell area where the update
	 * to the ring will be made. For completion rings, this value is
	 * also the MSI-X vector number for the function the completion
	 * ring is associated with.
	 */
	uint16_t cmpl_ring_id;
	/*
	 * This field is used only when ring_type is a TX ring. This
	 * value indicates what completion ring the TX ring is
	 * associated with.
	 */
	uint16_t queue_id;
	/*
	 * This field is used only when ring_type is a TX ring. This
	 * value indicates what CoS queue the TX ring is associated
	 * with.
	 */
	uint8_t unused_4;
	uint8_t unused_5;
	uint32_t reserved1;
	/* This field is reserved for the future use. It shall be set to 0. */
	uint16_t ring_arb_cfg;
	/*
	 * This field is used only when ring_type is a TX ring. This
	 * field is used to configure arbitration related parameters for
	 * a TX ring.
	 */
	/* Arbitration policy used for the ring. */
	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK UINT32_C(0xf)
	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT	0
	/*
	 * Use strict priority for the TX ring. Priority
	 * value is specified in arb_policy_param
	 */
	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \
		(UINT32_C(0x1) << 0)
	/*
	 * Use weighted fair queue arbitration for the
	 * TX ring. Weight is specified in
	 * arb_policy_param
	 */
	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \
		(UINT32_C(0x2) << 0)
	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \
		RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ
	/* Reserved field. */
	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK	UINT32_C(0xf0)
	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT	4
	/*
	 * Arbitration policy specific parameter. # For strict priority
	 * arbitration policy, this field represents a priority value.
	 * If set to 0, then the priority is not specified and the HWRM
	 * is allowed to select any priority for this TX ring. # For
	 * weighted fair queue arbitration policy, this field represents
	 * a weight value. If set to 0, then the weight is not specified
	 * and the HWRM is allowed to select any weight for this TX
	 * ring.
	 */
	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK  \
		UINT32_C(0xff00)
	#define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT	8
	uint8_t unused_6;
	uint8_t unused_7;
	uint32_t reserved3;
	/* This field is reserved for the future use. It shall be set to 0. */
	uint32_t stat_ctx_id;
	/*
	 * This field is used only when ring_type is a TX ring. This
	 * input indicates what statistics context this ring should be
	 * associated with.
	 */
	uint32_t reserved4;
	/* This field is reserved for the future use. It shall be set to 0. */
	uint32_t max_bw;
	/*
	 * This field is used only when ring_type is a TX ring to
	 * specify maximum BW allocated to the TX ring. The HWRM will
	 * translate this value into byte counter and time interval used
	 * for this ring inside the device.
	 */
	/* The bandwidth value. */
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT	0
	/* The granularity of the value	(bits or bytes). */
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE	UINT32_C(0x10000000)
	/* Value is in bits. */
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS	(UINT32_C(0x0) << 28)
	/* Value is in bytes. */
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \
		RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES
	/* bw_value_unit is 3 b */
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK	\
		UINT32_C(0xe0000000)
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT	29
	/* Value is in Mb or MB	(base 10). */
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA	\
		(UINT32_C(0x0) << 29)
	/* Value is in Kb or KB	(base 10). */
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO	\
		(UINT32_C(0x2) << 29)
	/* Value is in bits or bytes. */
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE	\
		(UINT32_C(0x4) << 29)
	/* Value is in Gb or GB	(base 10). */
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA	\
		(UINT32_C(0x6) << 29)
	/* Value is in 1/100th of a percentage of total bandwidth. */
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
		(UINT32_C(0x1) << 29)
	/* Invalid unit */
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
		(UINT32_C(0x7) << 29)
	#define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
		RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
	uint8_t int_mode;
	/*
	 * This field is used only when ring_type is a Completion ring.
	 * This value indicates what interrupt mode should be used on
	 * this completion ring. Note: In the legacy interrupt mode, no
	 * more than 16 completion rings are allowed.
	 */
	/* Legacy INTA */
	#define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY	UINT32_C(0x0)
	/* Reserved */
	#define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD	UINT32_C(0x1)
	/* MSI-X */
	#define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX	UINT32_C(0x2)
	/* No Interrupt - Polled mode */
	#define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL	UINT32_C(0x3)
	uint8_t unused_8[3];
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_ring_alloc_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint16_t ring_id;
	/*
	 * Physical number of ring allocated. This value shall be unique
	 * for a ring type.
	 */
	uint16_t logical_ring_id;
	/* Logical number of ring allocated. */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_ring_free */
/*
 * Description: This command is used to free a ring and associated resources.
 * With QoS and DCBx agents, it is possible the traffic classes will be moved
 * from one CoS queue to another. When this occurs, the driver shall call
 * 'hwrm_ring_free' to free the allocated rings and then call 'hwrm_ring_alloc'
 * to re-allocate each ring and assign it to a new CoS queue. hwrm_ring_free
 * shall be called on a ring only after it has been idle for 500ms or more and
 * no frames have been posted to the ring during this time. All frames queued
 * for transmission shall be completed and at least 500ms time elapsed from the
 * last completion before calling this command.
 */
/* Input	(24 bytes) */
struct hwrm_ring_free_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint8_t ring_type;
	/* Ring Type. */
	/* L2 Completion Ring	(CR) */
	#define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL	UINT32_C(0x0)
	/* TX Ring	(TR) */
	#define HWRM_RING_FREE_INPUT_RING_TYPE_TX	UINT32_C(0x1)
	/* RX Ring	(RR) */
	#define HWRM_RING_FREE_INPUT_RING_TYPE_RX	UINT32_C(0x2)
	/* RoCE Notification Completion Ring	(ROCE_CR) */
	#define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL	UINT32_C(0x3)
	uint8_t unused_0;
	uint16_t ring_id;
	/* Physical number of ring allocated. */
	uint32_t unused_1;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_ring_free_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_ring_grp_alloc */
/*
 * Description: This API allocates and does basic preparation for a ring group.
 */
/* Input	(24 bytes) */
struct hwrm_ring_grp_alloc_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint16_t cr;
	/* This value identifies the CR associated with the ring group. */
	uint16_t rr;
	/* This value identifies the main RR associated with the ring group. */
	uint16_t ar;
	/*
	 * This value identifies the aggregation RR associated with the
	 * ring group. If this value is 0xFF...	(All Fs), then no
	 * Aggregation ring will be set.
	 */
	uint16_t sc;
	/*
	 * This value identifies the statistics context associated with
	 * the ring group.
	 */
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_ring_grp_alloc_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t ring_group_id;
	/*
	 * This is the ring group ID value. Use this value to program
	 * the default ring group for the VNIC or as table entries in an
	 * RSS/COS context.
	 */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_ring_grp_free */
/*
 * Description: This API frees a ring group and associated resources. # If a
 * ring in the ring group is reset or free, then the associated rings in the
 * ring group shall also be reset/free using hwrm_ring_free. # A function driver
 * shall always use hwrm_ring_grp_free after freeing all rings in a group. # As
 * a part of executing this command, the HWRM shall reset all associated ring
 * group resources.
 */
/* Input	(24 bytes) */
struct hwrm_ring_grp_free_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t ring_group_id;
	/* This is the ring group ID value. */
	uint32_t unused_0;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_ring_grp_free_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_cfa_l2_filter_alloc */
/*
 * Description: An L2 filter is a filter resource that is used to identify a
 * vnic or ring for a packet based on layer 2 fields. Layer 2 fields for
 * encapsulated packets include both outer L2 header and/or inner l2 header of
 * encapsulated packet. The L2 filter resource covers the following OS specific
 * L2 filters. Linux/FreeBSD (per function): # Broadcast enable/disable # List
 * of individual multicast filters # All multicast enable/disable filter #
 * Unicast filters # Promiscuous mode VMware: # Broadcast enable/disable (per
 * physical function) # All multicast enable/disable	(per function) # Unicast
 * filters per ring or vnic # Promiscuous mode per PF Windows: # Broadcast
 * enable/disable (per physical function) # List of individual multicast filters
 * (Driver needs to advertise the maximum number of filters supported) # All
 * multicast enable/disable per physical function # Unicast filters per vnic #
 * Promiscuous mode per PF Implementation notes on the use of VNIC in this
 * command: # By default, these filters belong to default vnic for the function.
 * # Once these filters are set up, only destination VNIC can be modified. # If
 * the destination VNIC is not specified in this command, then the HWRM shall
 * only create an l2 context id. HWRM Implementation notes for multicast
 * filters: # The hwrm_filter_alloc command can be used to set up multicast
 * filters (perfect match or partial match). Each individual function driver can
 * set up multicast filters independently. # The HWRM needs to keep track of
 * multicast filters set up by function drivers and maintain multicast group
 * replication records to enable a subset of functions to receive traffic for a
 * specific multicast address. # When a specific multicast filter cannot be set,
 * the HWRM shall return an error. In this error case, the driver should fall
 * back to using one general filter	(rather than specific) for all multicast
 * traffic. # When the SR-IOV is enabled, the HWRM needs to additionally track
 * source knockout per multicast group record. Examples of setting unicast
 * filters: For a unicast MAC based filter, one can use a combination of the
 * fields and masks provided in this command to set up the filter. Below are
 * some examples: # MAC + no VLAN filter: This filter is used to identify
 * traffic that does not contain any VLAN tags and matches destination	(or
 * source) MAC address. This filter can be set up by setting only l2_addr field
 * to be a valid field. All other fields are not valid. The following value is
 * set for l2_addr. l2_addr = MAC # MAC + Any VLAN filter: This filter is used
 * to identify traffic that carries single VLAN tag and matches	(destination or
 * source) MAC address. This filter can be set up by setting only l2_addr and
 * l2_ovlan_mask fields to be valid fields. All other fields are not valid. The
 * following values are set for those two valid fields. l2_addr = MAC,
 * l2_ovlan_mask = 0xFFFF # MAC + no VLAN or VLAN ID=0: This filter is used to
 * identify untagged traffic that does not contain any VLAN tags or a VLAN tag
 * with VLAN ID = 0 and matches destination (or source) MAC address. This filter
 * can be set up by setting only l2_addr and l2_ovlan fields to be valid fields.
 * All other fields are not valid. The following value are set for l2_addr and
 * l2_ovlan. l2_addr = MAC, l2_ovlan = 0x0 # MAC + no VLAN or any VLAN: This
 * filter is used to identify traffic that contains zero or 1 VLAN tag and
 * matches destination	(or source) MAC address. This filter can be set up by
 * setting only l2_addr, l2_ovlan, and l2_mask fields to be valid fields. All
 * other fields are not valid. The following value are set for l2_addr,
 * l2_ovlan, and l2_mask fields. l2_addr = MAC, l2_ovlan = 0x0, l2_ovlan_mask =
 * 0xFFFF # MAC + VLAN ID filter: This filter can be set up by setting only
 * l2_addr, l2_ovlan, and l2_ovlan_mask fields to be valid fields. All other
 * fields are not valid. The following values are set for those three valid
 * fields. l2_addr = MAC, l2_ovlan = VLAN ID, l2_ovlan_mask = 0xF000
 */
/* Input	(96 bytes) */
struct hwrm_cfa_l2_filter_alloc_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t flags;
	/*
	 * Enumeration denoting the RX, TX type of the resource. This
	 * enumeration is used for resources that are similar for both
	 * TX and RX paths of the chip.
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH	UINT32_C(0x1)
	/* tx path */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX	\
		(UINT32_C(0x0) << 0)
	/* rx path */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX	\
		(UINT32_C(0x1) << 0)
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
		CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
	/*
	 * Setting of this flag indicates the applicability to the
	 * loopback path.
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK	UINT32_C(0x2)
	/*
	 * Setting of this flag indicates drop action. If this flag is
	 * not set, then it should be considered accept action.
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP	UINT32_C(0x4)
	/*
	 * If this flag is set, all t_l2_* fields are invalid and they
	 * should not be specified. If this flag is set, then l2_*
	 * fields refer to fields of outermost L2 header.
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST UINT32_C(0x8)
	uint32_t enables;
	/* This bit must be '1' for the l2_addr field to be configured. */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR UINT32_C(0x1)
	/* This bit must be '1' for the l2_addr_mask field to be configured. */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK	\
		UINT32_C(0x2)
	/* This bit must be '1' for the l2_ovlan field to be configured. */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN	UINT32_C(0x4)
	/*
	 * This bit must be '1' for the l2_ovlan_mask field to be
	 * configured.
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK	 \
		UINT32_C(0x8)
	/* This bit must be '1' for the l2_ivlan field to be configured. */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN	UINT32_C(0x10)
	/*
	 * This bit must be '1' for the l2_ivlan_mask field to be
	 * configured.
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK	 \
		UINT32_C(0x20)
	/* This bit must be '1' for the t_l2_addr field to be configured. */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR UINT32_C(0x40)
	/*
	 * This bit must be '1' for the t_l2_addr_mask field to be
	 * configured.
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK	\
		UINT32_C(0x80)
	/* This bit must be '1' for the t_l2_ovlan field to be configured. */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN	\
		UINT32_C(0x100)
	/*
	 * This bit must be '1' for the t_l2_ovlan_mask field to be
	 * configured.
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK	\
		UINT32_C(0x200)
	/* This bit must be '1' for the t_l2_ivlan field to be configured. */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN	\
		UINT32_C(0x400)
	/*
	 * This bit must be '1' for the t_l2_ivlan_mask field to be
	 * configured.
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK	\
		UINT32_C(0x800)
	/* This bit must be '1' for the src_type field to be configured. */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE	UINT32_C(0x1000)
	/* This bit must be '1' for the src_id field to be configured. */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID UINT32_C(0x2000)
	/* This bit must be '1' for the tunnel_type field to be configured. */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE	\
		UINT32_C(0x4000)
	/* This bit must be '1' for the dst_id field to be configured. */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x8000)
	/*
	 * This bit must be '1' for the mirror_vnic_id field to be
	 * configured.
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID	\
		UINT32_C(0x10000)
	uint8_t l2_addr[6];
	/*
	 * This value sets the match value for the L2 MAC address.
	 * Destination MAC address for RX path. Source MAC address for
	 * TX path.
	 */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t l2_addr_mask[6];
	/*
	 * This value sets the mask value for the L2 address. A value of
	 * 0 will mask the corresponding bit from compare.
	 */
	uint16_t l2_ovlan;
	/* This value sets VLAN ID value for outer VLAN. */
	uint16_t l2_ovlan_mask;
	/*
	 * This value sets the mask value for the ovlan id. A value of 0
	 * will mask the corresponding bit from compare.
	 */
	uint16_t l2_ivlan;
	/* This value sets VLAN ID value for inner VLAN. */
	uint16_t l2_ivlan_mask;
	/*
	 * This value sets the mask value for the ivlan id. A value of 0
	 * will mask the corresponding bit from compare.
	 */
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t t_l2_addr[6];
	/*
	 * This value sets the match value for the tunnel L2 MAC
	 * address. Destination MAC address for RX path. Source MAC
	 * address for TX path.
	 */
	uint8_t unused_4;
	uint8_t unused_5;
	uint8_t t_l2_addr_mask[6];
	/*
	 * This value sets the mask value for the tunnel L2 address. A
	 * value of 0 will mask the corresponding bit from compare.
	 */
	uint16_t t_l2_ovlan;
	/* This value sets VLAN ID value for tunnel outer VLAN. */
	uint16_t t_l2_ovlan_mask;
	/*
	 * This value sets the mask value for the tunnel ovlan id. A
	 * value of 0 will mask the corresponding bit from compare.
	 */
	uint16_t t_l2_ivlan;
	/* This value sets VLAN ID value for tunnel inner VLAN. */
	uint16_t t_l2_ivlan_mask;
	/*
	 * This value sets the mask value for the tunnel ivlan id. A
	 * value of 0 will mask the corresponding bit from compare.
	 */
	uint8_t src_type;
	/* This value identifies the type of source of the packet. */
	/* Network port */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT	UINT32_C(0x0)
	/* Physical function */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF	UINT32_C(0x1)
	/* Virtual function */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF	UINT32_C(0x2)
	/* Virtual NIC of a function */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC	UINT32_C(0x3)
	/* Embedded processor for CFA management */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG	UINT32_C(0x4)
	/* Embedded processor for OOB management */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE	UINT32_C(0x5)
	/* Embedded processor for RoCE */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO	UINT32_C(0x6)
	/* Embedded processor for network proxy functions */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG	UINT32_C(0x7)
	uint8_t unused_6;
	uint32_t src_id;
	/*
	 * This value is the id of the source. For a network port, it
	 * represents port_id. For a physical function, it represents
	 * fid. For a virtual function, it represents vf_id. For a vnic,
	 * it represents vnic_id. For embedded processors, this id is
	 * not valid. Notes: 1. The function ID is implied if it src_id
	 * is not provided for a src_type that is either
	 */
	uint8_t tunnel_type;
	/* Tunnel Type. */
	/* Non-tunnel */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
		UINT32_C(0x0)
	/* Virtual eXtensible Local Area Network	(VXLAN) */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
		UINT32_C(0x1)
	/*
	 * Network Virtualization Generic Routing
	 * Encapsulation	(NVGRE)
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
		UINT32_C(0x2)
	/*
	 * Generic Routing Encapsulation	(GRE) inside
	 * Ethernet payload
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3)
	/* IP in IP */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP	UINT32_C(0x4)
	/* Generic Network Virtualization Encapsulation	(Geneve) */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
	/* Multi-Protocol Lable Switching	(MPLS) */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS	UINT32_C(0x6)
	/* Stateless Transport Tunnel	(STT) */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT	UINT32_C(0x7)
	/*
	 * Generic Routing Encapsulation	(GRE) inside IP
	 * datagram payload
	 */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
	/* Any tunneled traffic */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
		UINT32_C(0xff)
	uint8_t unused_7;
	uint16_t dst_id;
	/*
	 * If set, this value shall represent the Logical VNIC ID of the
	 * destination VNIC for the RX path and network port id of the
	 * destination port for the TX path.
	 */
	uint16_t mirror_vnic_id;
	/* Logical VNIC ID of the VNIC where traffic is mirrored. */
	uint8_t pri_hint;
	/*
	 * This hint is provided to help in placing the filter in the
	 * filter table.
	 */
	/* No preference */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
		UINT32_C(0x0)
	/* Above the given filter */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \
		UINT32_C(0x1)
	/* Below the given filter */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \
		UINT32_C(0x2)
	/* As high as possible */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX	UINT32_C(0x3)
	/* As low as possible */
	#define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN	UINT32_C(0x4)
	uint8_t unused_8;
	uint32_t unused_9;
	uint64_t l2_filter_id_hint;
	/*
	 * This is the ID of the filter that goes along with the
	 * pri_hint. This field is valid only for the following values.
	 * 1 - Above the given filter 2 - Below the given filter
	 */
} __attribute__((packed));

/* Output	(24 bytes) */
struct hwrm_cfa_l2_filter_alloc_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint64_t l2_filter_id;
	/*
	 * This value identifies a set of CFA data structures used for
	 * an L2 context.
	 */
	uint32_t flow_id;
	/*
	 * This is the ID of the flow associated with this filter. This
	 * value shall be used to match and associate the flow
	 * identifier returned in completion records. A value of
	 * 0xFFFFFFFF shall indicate no flow id.
	 */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_cfa_l2_filter_free */
/*
 * Description: Free a L2 filter. The HWRM shall free all associated filter
 * resources with the L2 filter.
 */
/* Input	(24 bytes) */
struct hwrm_cfa_l2_filter_free_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint64_t l2_filter_id;
	/*
	 * This value identifies a set of CFA data structures used for
	 * an L2 context.
	 */
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_cfa_l2_filter_free_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_cfa_l2_filter_cfg */
/* Description: Change the configuration of an existing L2 filter */
/* Input	(40 bytes) */
struct hwrm_cfa_l2_filter_cfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t flags;
	/*
	 * Enumeration denoting the RX, TX type of the resource. This
	 * enumeration is used for resources that are similar for both
	 * TX and RX paths of the chip.
	 */
	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH	UINT32_C(0x1)
	/* tx path */
	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX \
		(UINT32_C(0x0) << 0)
	/* rx path */
	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX \
		(UINT32_C(0x1) << 0)
	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
		CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
	/*
	 * Setting of this flag indicates drop action. If this flag is
	 * not set, then it should be considered accept action.
	 */
	#define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP	UINT32_C(0x2)
	uint32_t enables;
	/* This bit must be '1' for the dst_id field to be configured. */
	#define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID	UINT32_C(0x1)
	/*
	 * This bit must be '1' for the new_mirror_vnic_id field to be
	 * configured.
	 */
	#define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID   \
		UINT32_C(0x2)
	uint64_t l2_filter_id;
	/*
	 * This value identifies a set of CFA data structures used for
	 * an L2 context.
	 */
	uint32_t dst_id;
	/*
	 * If set, this value shall represent the Logical VNIC ID of the
	 * destination VNIC for the RX path and network port id of the
	 * destination port for the TX path.
	 */
	uint32_t new_mirror_vnic_id;
	/* New Logical VNIC ID of the VNIC where traffic is mirrored. */
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_cfa_l2_filter_cfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_cfa_l2_set_rx_mask */
/* Description: This command will set rx mask of the function. */
/* Input	(56 bytes) */
struct hwrm_cfa_l2_set_rx_mask_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t vnic_id;
	/* VNIC ID */
	uint32_t mask;
	/* Reserved for future use. */
	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_RESERVED	UINT32_C(0x1)
	/*
	 * When this bit is '1', the function is requested to accept
	 * multi-cast packets specified by the multicast addr table.
	 */
	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST	UINT32_C(0x2)
	/*
	 * When this bit is '1', the function is requested to accept all
	 * multi-cast packets.
	 */
	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST	UINT32_C(0x4)
	/*
	 * When this bit is '1', the function is requested to accept
	 * broadcast packets.
	 */
	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST	UINT32_C(0x8)
	/*
	 * When this bit is '1', the function is requested to be put in
	 * the promiscuous mode. The HWRM should accept any function to
	 * set up promiscuous mode. The HWRM shall follow the semantics
	 * below for the promiscuous mode support. # When partitioning
	 * is not enabled on a port	(i.e. single PF on the port), then
	 * the PF shall be allowed to be in the promiscuous mode. When
	 * the PF is in the promiscuous mode, then it shall receive all
	 * host bound traffic on that port. # When partitioning is
	 * enabled on a port	(i.e. multiple PFs per port) and a PF on
	 * that port is in the promiscuous mode, then the PF receives
	 * all traffic within that partition as identified by a unique
	 * identifier for the PF	(e.g. S-Tag). If a unique outer VLAN
	 * for the PF is specified, then the setting of promiscuous mode
	 * on that PF shall result in the PF receiving all host bound
	 * traffic with matching outer VLAN. # A VF shall can be set in
	 * the promiscuous mode. In the promiscuous mode, the VF does
	 * not receive any traffic unless a unique outer VLAN for the VF
	 * is specified. If a unique outer VLAN for the VF is specified,
	 * then the setting of promiscuous mode on that VF shall result
	 * in the VF receiving all host bound traffic with the matching
	 * outer VLAN. # The HWRM shall allow the setting of promiscuous
	 * mode on a function independently from the promiscuous mode
	 * settings on other functions.
	 */
	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS UINT32_C(0x10)
	/*
	 * If this flag is set, the corresponding RX filters shall be
	 * set up to cover multicast/broadcast filters for the outermost
	 * Layer 2 destination MAC address field.
	 */
	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST	UINT32_C(0x20)
	/*
	 * If this flag is set, the corresponding RX filters shall be
	 * set up to cover multicast/broadcast filters for the VLAN-
	 * tagged packets that match the TPID and VID fields of VLAN
	 * tags in the VLAN tag table specified in this command.
	 */
	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY	UINT32_C(0x40)
	/*
	 * If this flag is set, the corresponding RX filters shall be
	 * set up to cover multicast/broadcast filters for non-VLAN
	 * tagged packets and VLAN-tagged packets that match the TPID
	 * and VID fields of VLAN tags in the VLAN tag table specified
	 * in this command.
	 */
	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN	UINT32_C(0x80)
	/*
	 * If this flag is set, the corresponding RX filters shall be
	 * set up to cover multicast/broadcast filters for non-VLAN
	 * tagged packets and VLAN-tagged packets matching any VLAN tag.
	 * If this flag is set, then the HWRM shall ignore VLAN tags
	 * specified in vlan_tag_tbl. If none of vlanonly, vlan_nonvlan,
	 * and anyvlan_nonvlan flags is set, then the HWRM shall ignore
	 * VLAN tags specified in vlan_tag_tbl. The HWRM client shall
	 * set at most one flag out of vlanonly, vlan_nonvlan, and
	 * anyvlan_nonvlan.
	 */
	#define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN	\
		UINT32_C(0x100)
	uint64_t mc_tbl_addr;
	/* This is the address for mcast address tbl. */
	uint32_t num_mc_entries;
	/*
	 * This value indicates how many entries in mc_tbl are valid.
	 * Each entry is 6 bytes.
	 */
	uint32_t unused_0;
	uint64_t vlan_tag_tbl_addr;
	/*
	 * This is the address for VLAN tag table. Each VLAN entry in
	 * the table is 4 bytes of a VLAN tag including TPID, PCP, DEI,
	 * and VID fields in network byte order.
	 */
	uint32_t num_vlan_tags;
	/*
	 * This value indicates how many entries in vlan_tag_tbl are
	 * valid. Each entry is 4 bytes.
	 */
	uint32_t unused_1;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_cfa_l2_set_rx_mask_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_cfa_vlan_antispoof_cfg */
/* Description: Configures vlan anti-spoof filters for VF. */
/* Input (32 bytes) */
struct hwrm_cfa_vlan_antispoof_cfg_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format for the
	 * rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request will be
	 * optionally completed on. If the value is -1, then no CR completion
	 * will be generated. Any other value must be a valid CR ring_id value
	 * for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
	 * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written when the
	 * request is complete. This area must be 16B aligned and must be
	 * cleared to zero before the request is made.
	 */
	uint16_t fid;
	/*
	 * Function ID of the function that is being configured. Only valid for
	 * a VF FID configured by the PF.
	 */
	uint8_t unused_0;
	uint8_t unused_1;
	uint32_t num_vlan_entries;
	/* Number of VLAN entries in the vlan_tag_mask_tbl. */
	uint64_t vlan_tag_mask_tbl_addr;
	/*
	 * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN antispoof
	 * table. Each table entry contains the 16-bit TPID (0x8100 or 0x88a8
	 * only), 16-bit VLAN ID, and a 16-bit mask, all in network order to
	 * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry, the mask
	 * value should be 0xfff for the 12-bit VLAN ID.
	 */
};

/* Output (16 bytes) */
struct hwrm_cfa_vlan_antispoof_cfg_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in parameters,
	 * and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last byte of
	 * the response is a valid flag that will read as '1' when the command
	 * has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the output is
	 * completely written to RAM. This field should be read as '1' to
	 * indicate that the output has been completely written. When writing a
	 * command completion or response to an internal processor, the order of
	 * writes has to be such that this field is written last.
	 */
};

/* hwrm_tunnel_dst_port_query */
/*
 * Description: This function is called by a driver to query tunnel type
 * specific destination port configuration.
 */
/* Input	(24 bytes) */
struct hwrm_tunnel_dst_port_query_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint8_t tunnel_type;
	/* Tunnel Type. */
	/* Virtual eXtensible Local Area Network	(VXLAN) */
	#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN \
		UINT32_C(0x1)
	/* Generic Network Virtualization Encapsulation	(Geneve) */
	#define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE \
		UINT32_C(0x5)
	uint8_t unused_0[7];
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_tunnel_dst_port_query_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint16_t tunnel_dst_port_id;
	/*
	 * This field represents the identifier of L4 destination port
	 * used for the given tunnel type. This field is valid for
	 * specific tunnel types that use layer 4	(e.g. UDP) transports
	 * for tunneling.
	 */
	uint16_t tunnel_dst_port_val;
	/*
	 * This field represents the value of L4 destination port
	 * identified by tunnel_dst_port_id. This field is valid for
	 * specific tunnel types that use layer 4	(e.g. UDP) transports
	 * for tunneling. This field is in network byte order. A value
	 * of 0 means that the destination port is not configured.
	 */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_tunnel_dst_port_alloc */
/*
 * Description: This function is called by a driver to allocate l4 destination
 * port for a specific tunnel type. The destination port value is provided in
 * the input. If the HWRM supports only one global destination port for a tunnel
 * type, then the HWRM shall keep track of its usage as described below. # The
 * first caller that allocates a destination port shall always succeed and the
 * HWRM shall save the destination port configuration for that tunnel type and
 * increment the usage count to 1. # Subsequent callers allocating the same
 * destination port for that tunnel type shall succeed and the HWRM shall
 * increment the usage count for that port for each subsequent caller that
 * succeeds. # Any subsequent caller trying to allocate a different destination
 * port for that tunnel type shall fail until the usage count for the original
 * destination port goes to zero. # A caller that frees a port will cause the
 * usage count for that port to decrement.
 */
/* Input	(24 bytes) */
struct hwrm_tunnel_dst_port_alloc_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint8_t tunnel_type;
	/* Tunnel Type. */
	/* Virtual eXtensible Local Area Network	(VXLAN) */
	#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
	/* Generic Network Virtualization Encapsulation	(Geneve) */
	#define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
		UINT32_C(0x5)
	uint8_t unused_0;
	uint16_t tunnel_dst_port_val;
	/*
	 * This field represents the value of L4 destination port used
	 * for the given tunnel type. This field is valid for specific
	 * tunnel types that use layer 4	(e.g. UDP) transports for
	 * tunneling. This field is in network byte order. A value of 0
	 * shall fail the command.
	 */
	uint32_t unused_1;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_tunnel_dst_port_alloc_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint16_t tunnel_dst_port_id;
	/*
	 * Identifier of a tunnel L4 destination port value. Only
	 * applies to tunnel types that has l4 destination port
	 * parameters.
	 */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t unused_4;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_tunnel_dst_port_free */
/*
 * Description: This function is called by a driver to free l4 destination port
 * for a specific tunnel type.
 */
/* Input	(24 bytes) */
struct hwrm_tunnel_dst_port_free_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint8_t tunnel_type;
	/* Tunnel Type. */
	/* Virtual eXtensible Local Area Network	(VXLAN) */
	#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
	/* Generic Network Virtualization Encapsulation	(Geneve) */
	#define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
	uint8_t unused_0;
	uint16_t tunnel_dst_port_id;
	/*
	 * Identifier of a tunnel L4 destination port value. Only
	 * applies to tunnel types that has l4 destination port
	 * parameters.
	 */
	uint32_t unused_1;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_tunnel_dst_port_free_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_stat_ctx_alloc */
/*
 * Description: This command allocates and does basic preparation for a stat
 * context.
 */
/* Input	(32 bytes) */
struct hwrm_stat_ctx_alloc_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint64_t stats_dma_addr;
	/* This is the address for statistic block. */
	uint32_t update_period_ms;
	/*
	 * The statistic block update period in ms. e.g. 250ms, 500ms,
	 * 750ms, 1000ms. If update_period_ms is 0, then the stats
	 * update shall be never done and the DMA address shall not be
	 * used. In this case, the stat block can only be read by
	 * hwrm_stat_ctx_query command.
	 */
	uint8_t stat_ctx_flags;
	/*
	 * This field is used to specify statistics context specific
	 * configuration flags.
	 */
	/*
	 * When this bit is set to '1', the statistics context shall be
	 * allocated for RoCE traffic only. In this case, traffic other
	 * than offloaded RoCE traffic shall not be included in this
	 * statistic context. When this bit is set to '0', the
	 * statistics context shall be used for the network traffic
	 * other than offloaded RoCE traffic.
	 */
	#define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE	UINT32_C(0x1)
	uint8_t unused_0[3];
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_stat_ctx_alloc_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t stat_ctx_id;
	/* This is the statistics context ID value. */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_stat_ctx_free */
/* Description: This command is used to free a stat context. */
/* Input	(24 bytes) */
struct hwrm_stat_ctx_free_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t stat_ctx_id;
	/* ID of the statistics context that is being queried. */
	uint32_t unused_0;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_stat_ctx_free_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t stat_ctx_id;
	/* This is the statistics context ID value. */
	uint8_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_stat_ctx_clr_stats */
/* Description: This command clears statistics of a context. */
/* Input	(24 bytes) */
struct hwrm_stat_ctx_clr_stats_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t stat_ctx_id;
	/* ID of the statistics context that is being queried. */
	uint32_t unused_0;
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_stat_ctx_clr_stats_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_stat_ctx_query */
/* Description: This command returns statistics of a context. */
/* Input (24 bytes) */

struct hwrm_stat_ctx_query_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format for the
	 * rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request will be
	 * optionally completed on. If the value is -1, then no CR completion
	 * will be generated. Any other value must be a valid CR ring_id value
	 * for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
	 * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written when the
	 * request is complete. This area must be 16B aligned and must be
	 * cleared to zero before the request is made.
	 */
	uint32_t stat_ctx_id;
	/* ID of the statistics context that is being queried. */
	uint32_t unused_0;
} __attribute__((packed));

/* Output (176 bytes) */

struct hwrm_stat_ctx_query_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in parameters,
	 * and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last byte of
	 * the response is a valid flag that will read as '1' when the command
	 * has been completely written to memory.
	 */
	uint64_t tx_ucast_pkts;
	/* Number of transmitted unicast packets */
	uint64_t tx_mcast_pkts;
	/* Number of transmitted multicast packets */
	uint64_t tx_bcast_pkts;
	/* Number of transmitted broadcast packets */
	uint64_t tx_err_pkts;
	/* Number of transmitted packets with error */
	uint64_t tx_drop_pkts;
	/* Number of dropped packets on transmit path */
	uint64_t tx_ucast_bytes;
	/* Number of transmitted bytes for unicast traffic */
	uint64_t tx_mcast_bytes;
	/* Number of transmitted bytes for multicast traffic */
	uint64_t tx_bcast_bytes;
	/* Number of transmitted bytes for broadcast traffic */
	uint64_t rx_ucast_pkts;
	/* Number of received unicast packets */
	uint64_t rx_mcast_pkts;
	/* Number of received multicast packets */
	uint64_t rx_bcast_pkts;
	/* Number of received broadcast packets */
	uint64_t rx_err_pkts;
	/* Number of received packets with error */
	uint64_t rx_drop_pkts;
	/* Number of dropped packets on received path */
	uint64_t rx_ucast_bytes;
	/* Number of received bytes for unicast traffic */
	uint64_t rx_mcast_bytes;
	/* Number of received bytes for multicast traffic */
	uint64_t rx_bcast_bytes;
	/* Number of received bytes for broadcast traffic */
	uint64_t rx_agg_pkts;
	/* Number of aggregated unicast packets */
	uint64_t rx_agg_bytes;
	/* Number of aggregated unicast bytes */
	uint64_t rx_agg_events;
	/* Number of aggregation events */
	uint64_t rx_agg_aborts;
	/* Number of aborted aggregations */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the output is
	 * completely written to RAM. This field should be read as '1' to
	 * indicate that the output has been completely written. When writing a
	 * command completion or response to an internal processor, the order of
	 * writes has to be such that this field is written last.
	 */
} __attribute__((packed));

/* hwrm_exec_fwd_resp */
/*
 * Description: This command is used to send an encapsulated request to the
 * HWRM. This command instructs the HWRM to execute the request and forward the
 * response of the encapsulated request to the location specified in the
 * original request that is encapsulated. The target id of this command shall be
 * set to 0xFFFF (HWRM). The response location in this command shall be used to
 * acknowledge the receipt of the encapsulated request and forwarding of the
 * response.
 */
/* Input	(128 bytes) */
struct hwrm_exec_fwd_resp_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t encap_request[26];
	/*
	 * This is an encapsulated request. This request should be
	 * executed by the HWRM and the response should be provided in
	 * the response buffer inside the encapsulated request.
	 */
	uint16_t encap_resp_target_id;
	/*
	 * This value indicates the target id of the response to the
	 * encapsulated request. 0x0 - 0xFFF8 - Used for function ids
	 * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF -
	 * HWRM
	 */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_exec_fwd_resp_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* hwrm_reject_fwd_resp */
/*
 * Description: This command is used to send an encapsulated request to the
 * HWRM. This command instructs the HWRM to reject the request and forward the
 * error response of the encapsulated request to the location specified in the
 * original request that is encapsulated. The target id of this command shall be
 * set to 0xFFFF (HWRM). The response location in this command shall be used to
 * acknowledge the receipt of the encapsulated request and forwarding of the
 * response.
 */
/* Input	(128 bytes) */
struct hwrm_reject_fwd_resp_input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
	uint32_t encap_request[26];
	/*
	 * This is an encapsulated request. This request should be
	 * rejected by the HWRM and the error response should be
	 * provided in the response buffer inside the encapsulated
	 * request.
	 */
	uint16_t encap_resp_target_id;
	/*
	 * This value indicates the target id of the response to the
	 * encapsulated request. 0x0 - 0xFFF8 - Used for function ids
	 * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF -
	 * HWRM
	 */
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_reject_fwd_resp_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t unused_0;
	uint8_t unused_1;
	uint8_t unused_2;
	uint8_t unused_3;
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* Hardware Resource Manager Specification */
/* Description: This structure is used to specify port description. */
/*
 * Note: The Hardware Resource Manager (HWRM) manages various hardware resources
 * inside the chip. The HWRM is implemented in firmware, and runs on embedded
 * processors inside the chip. This firmware service is vital part of the chip.
 * The chip can not be used by a driver or HWRM client without the HWRM.
 */
/* Input	(16 bytes) */
struct input {
	uint16_t req_type;
	/*
	 * This value indicates what type of request this is. The format
	 * for the rest of the command is determined by this field.
	 */
	uint16_t cmpl_ring;
	/*
	 * This value indicates the what completion ring the request
	 * will be optionally completed on. If the value is -1, then no
	 * CR completion will be generated. Any other value must be a
	 * valid CR ring_id value for this function.
	 */
	uint16_t seq_id;
	/* This value indicates the command sequence number. */
	uint16_t target_id;
	/*
	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function
	 * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
	 * - HWRM
	 */
	uint64_t resp_addr;
	/*
	 * This is the host address where the response will be written
	 * when the request is complete. This area must be 16B aligned
	 * and must be cleared to zero before the request is made.
	 */
} __attribute__((packed));

/* Output	(8 bytes) */
struct output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
} __attribute__((packed));

/* Short Command Structure (16 bytes) */
struct hwrm_short_input {
	uint16_t req_type;
	uint16_t signature;
	#define HWRM_SHORT_REQ_SIGNATURE_SHORT_CMD	(UINT32_C(0x4321))
	uint16_t unused_0;
	uint16_t size;
	uint64_t req_addr;
} __attribute__((packed));

#define HWRM_GET_HWRM_ERROR_CODE(arg) \
	{ \
		typeof(arg) x = (arg); \
	((x) == 0xf ? "HWRM_ERROR" : \
	((x) == 0xffff ? "CMD_NOT_SUPPORTED" : \
	((x) == 0xfffe ? "UNKNOWN_ERR" : \
	((x) == 0x4 ? "RESOURCE_ALLOC_ERROR" : \
	((x) == 0x5 ? "INVALID_FLAGS" : \
	((x) == 0x6 ? "INVALID_ENABLES" : \
	((x) == 0x0 ? "SUCCESS" : \
	((x) == 0x1 ? "FAIL" : \
	((x) == 0x2 ? "INVALID_PARAMS" : \
	((x) == 0x3 ? "RESOURCE_ACCESS_DENIED" : \
	"Unknown error_code")))))))))) \
	}

/* Return Codes	(8 bytes) */
struct ret_codes {
	uint16_t error_code;
	/* These are numbers assigned to return/error codes. */
	/* Request was successfully executed by the HWRM. */
	#define HWRM_ERR_CODE_SUCCESS	(UINT32_C(0x0))
	/* THe HWRM failed to execute the request. */
	#define HWRM_ERR_CODE_FAIL	(UINT32_C(0x1))
	/*
	 * The request contains invalid argument(s) or
	 * input parameters.
	 */
	#define HWRM_ERR_CODE_INVALID_PARAMS	(UINT32_C(0x2))
	/*
	 * The requester is not allowed to access the
	 * requested resource. This error code shall be
	 * provided in a response to a request to query
	 * or modify an existing resource that is not
	 * accessible by the requester.
	 */
	#define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED	(UINT32_C(0x3))
	/*
	 * The HWRM is unable to allocate the requested
	 * resource. This code only applies to requests
	 * for HWRM resource allocations.
	 */
	#define HWRM_ERR_CODE_RESOURCE_ALLOC_ERROR	(UINT32_C(0x4))
	/* Invalid combination of flags is specified in the request. */
	#define HWRM_ERR_CODE_INVALID_FLAGS	(UINT32_C(0x5))
	/*
	 * Invalid combination of enables fields is
	 * specified in the request.
	 */
	#define HWRM_ERR_CODE_INVALID_ENABLES	(UINT32_C(0x6))
	/*
	 * Generic HWRM execution error that represents
	 * an internal error.
	 */
	#define HWRM_ERR_CODE_HWRM_ERROR	(UINT32_C(0xf))
	/* Unknown error */
	#define HWRM_ERR_CODE_UNKNOWN_ERR	(UINT32_C(0xfffe))
	/* Unsupported or invalid command */
	#define HWRM_ERR_CODE_CMD_NOT_SUPPORTED	(UINT32_C(0xffff))
	uint16_t unused_0[3];
} __attribute__((packed));

/* Output	(16 bytes) */
struct hwrm_err_output {
	uint16_t error_code;
	/*
	 * Pass/Fail or error type Note: receiver to verify the in
	 * parameters, and fail the call with an error when appropriate
	 */
	uint16_t req_type;
	/* This field returns the type of original request. */
	uint16_t seq_id;
	/* This field provides original sequence number of the command. */
	uint16_t resp_len;
	/*
	 * This field is the length of the response in bytes. The last
	 * byte of the response is a valid flag that will read as '1'
	 * when the command has been completely written to memory.
	 */
	uint32_t opaque_0;
	/* debug info for this error response. */
	uint16_t opaque_1;
	/* debug info for this error response. */
	uint8_t cmd_err;
	/*
	 * In the case of an error response, command specific error code
	 * is returned in this field.
	 */
	uint8_t valid;
	/*
	 * This field is used in Output records to indicate that the
	 * output is completely written to RAM. This field should be
	 * read as '1' to indicate that the output has been completely
	 * written. When writing a command completion or response to an
	 * internal processor, the order of writes has to be such that
	 * this field is written last.
	 */
} __attribute__((packed));

/* Port Tx Statistics Formats	(408 bytes) */
struct tx_port_stats {
	uint64_t tx_64b_frames;
	/* Total Number of 64 Bytes frames transmitted */
	uint64_t tx_65b_127b_frames;
	/* Total Number of 65-127 Bytes frames transmitted */
	uint64_t tx_128b_255b_frames;
	/* Total Number of 128-255 Bytes frames transmitted */
	uint64_t tx_256b_511b_frames;
	/* Total Number of 256-511 Bytes frames transmitted */
	uint64_t tx_512b_1023b_frames;
	/* Total Number of 512-1023 Bytes frames transmitted */
	uint64_t tx_1024b_1518_frames;
	/* Total Number of 1024-1518 Bytes frames transmitted */
	uint64_t tx_good_vlan_frames;
	/*
	 * Total Number of each good VLAN	(exludes FCS errors) frame
	 * transmitted which is 1519 to 1522 bytes in length inclusive
	 *	(excluding framing bits but including FCS bytes).
	 */
	uint64_t tx_1519b_2047_frames;
	/* Total Number of 1519-2047 Bytes frames transmitted */
	uint64_t tx_2048b_4095b_frames;
	/* Total Number of 2048-4095 Bytes frames transmitted */
	uint64_t tx_4096b_9216b_frames;
	/* Total Number of 4096-9216 Bytes frames transmitted */
	uint64_t tx_9217b_16383b_frames;
	/* Total Number of 9217-16383 Bytes frames transmitted */
	uint64_t tx_good_frames;
	/* Total Number of good frames transmitted */
	uint64_t tx_total_frames;
	/* Total Number of frames transmitted */
	uint64_t tx_ucast_frames;
	/* Total number of unicast frames transmitted */
	uint64_t tx_mcast_frames;
	/* Total number of multicast frames transmitted */
	uint64_t tx_bcast_frames;
	/* Total number of broadcast frames transmitted */
	uint64_t tx_pause_frames;
	/* Total number of PAUSE control frames transmitted */
	uint64_t tx_pfc_frames;
	/* Total number of PFC/per-priority PAUSE control frames transmitted */
	uint64_t tx_jabber_frames;
	/* Total number of jabber frames transmitted */
	uint64_t tx_fcs_err_frames;
	/* Total number of frames transmitted with FCS error */
	uint64_t tx_control_frames;
	/* Total number of control frames transmitted */
	uint64_t tx_oversz_frames;
	/* Total number of over-sized frames transmitted */
	uint64_t tx_single_dfrl_frames;
	/* Total number of frames with single deferral */
	uint64_t tx_multi_dfrl_frames;
	/* Total number of frames with multiple deferrals */
	uint64_t tx_single_coll_frames;
	/* Total number of frames with single collision */
	uint64_t tx_multi_coll_frames;
	/* Total number of frames with multiple collisions */
	uint64_t tx_late_coll_frames;
	/* Total number of frames with late collisions */
	uint64_t tx_excessive_coll_frames;
	/* Total number of frames with excessive collisions */
	uint64_t tx_frag_frames;
	/* Total number of fragmented frames transmitted */
	uint64_t tx_err;
	/* Total number of transmit errors */
	uint64_t tx_tagged_frames;
	/* Total number of single VLAN tagged frames transmitted */
	uint64_t tx_dbl_tagged_frames;
	/* Total number of double VLAN tagged frames transmitted */
	uint64_t tx_runt_frames;
	/* Total number of runt frames transmitted */
	uint64_t tx_fifo_underruns;
	/* Total number of TX FIFO under runs */
	uint64_t tx_pfc_ena_frames_pri0;
	/*
	 * Total number of PFC frames with PFC enabled bit for Pri 0
	 * transmitted
	 */
	uint64_t tx_pfc_ena_frames_pri1;
	/*
	 * Total number of PFC frames with PFC enabled bit for Pri 1
	 * transmitted
	 */
	uint64_t tx_pfc_ena_frames_pri2;
	/*
	 * Total number of PFC frames with PFC enabled bit for Pri 2
	 * transmitted
	 */
	uint64_t tx_pfc_ena_frames_pri3;
	/*
	 * Total number of PFC frames with PFC enabled bit for Pri 3
	 * transmitted
	 */
	uint64_t tx_pfc_ena_frames_pri4;
	/*
	 * Total number of PFC frames with PFC enabled bit for Pri 4
	 * transmitted
	 */
	uint64_t tx_pfc_ena_frames_pri5;
	/*
	 * Total number of PFC frames with PFC enabled bit for Pri 5
	 * transmitted
	 */
	uint64_t tx_pfc_ena_frames_pri6;
	/*
	 * Total number of PFC frames with PFC enabled bit for Pri 6
	 * transmitted
	 */
	uint64_t tx_pfc_ena_frames_pri7;
	/*
	 * Total number of PFC frames with PFC enabled bit for Pri 7
	 * transmitted
	 */
	uint64_t tx_eee_lpi_events;
	/* Total number of EEE LPI Events on TX */
	uint64_t tx_eee_lpi_duration;
	/* EEE LPI Duration Counter on TX */
	uint64_t tx_llfc_logical_msgs;
	/*
	 * Total number of Link Level Flow Control	(LLFC) messages
	 * transmitted
	 */
	uint64_t tx_hcfc_msgs;
	/* Total number of HCFC messages transmitted */
	uint64_t tx_total_collisions;
	/* Total number of TX collisions */
	uint64_t tx_bytes;
	/* Total number of transmitted bytes */
	uint64_t tx_xthol_frames;
	/* Total number of end-to-end HOL frames */
	uint64_t tx_stat_discard;
	/* Total Tx Drops per Port reported by STATS block */
	uint64_t tx_stat_error;
	/* Total Tx Error Drops per Port reported by STATS block */
} __attribute__((packed));

/* Port Rx Statistics Formats	(528 bytes) */
struct rx_port_stats {
	uint64_t rx_64b_frames;
	/* Total Number of 64 Bytes frames received */
	uint64_t rx_65b_127b_frames;
	/* Total Number of 65-127 Bytes frames received */
	uint64_t rx_128b_255b_frames;
	/* Total Number of 128-255 Bytes frames received */
	uint64_t rx_256b_511b_frames;
	/* Total Number of 256-511 Bytes frames received */
	uint64_t rx_512b_1023b_frames;
	/* Total Number of 512-1023 Bytes frames received */
	uint64_t rx_1024b_1518_frames;
	/* Total Number of 1024-1518 Bytes frames received */
	uint64_t rx_good_vlan_frames;
	/*
	 * Total Number of each good VLAN	(exludes FCS errors) frame
	 * received which is 1519 to 1522 bytes in length inclusive
	 *	(excluding framing bits but including FCS bytes).
	 */
	uint64_t rx_1519b_2047b_frames;
	/* Total Number of 1519-2047 Bytes frames received */
	uint64_t rx_2048b_4095b_frames;
	/* Total Number of 2048-4095 Bytes frames received */
	uint64_t rx_4096b_9216b_frames;
	/* Total Number of 4096-9216 Bytes frames received */
	uint64_t rx_9217b_16383b_frames;
	/* Total Number of 9217-16383 Bytes frames received */
	uint64_t rx_total_frames;
	/* Total number of frames received */
	uint64_t rx_ucast_frames;
	/* Total number of unicast frames received */
	uint64_t rx_mcast_frames;
	/* Total number of multicast frames received */
	uint64_t rx_bcast_frames;
	/* Total number of broadcast frames received */
	uint64_t rx_fcs_err_frames;
	/* Total number of received frames with FCS error */
	uint64_t rx_ctrl_frames;
	/* Total number of control frames received */
	uint64_t rx_pause_frames;
	/* Total number of PAUSE frames received */
	uint64_t rx_pfc_frames;
	/* Total number of PFC frames received */
	uint64_t rx_unsupported_opcode_frames;
	/* Total number of frames received with an unsupported opcode */
	uint64_t rx_unsupported_da_pausepfc_frames;
	/*
	 * Total number of frames received with an unsupported DA for
	 * pause and PFC
	 */
	uint64_t rx_wrong_sa_frames;
	/* Total number of frames received with an unsupported SA */
	uint64_t rx_align_err_frames;
	/* Total number of received packets with alignment error */
	uint64_t rx_oor_len_frames;
	/* Total number of received frames with out-of-range length */
	uint64_t rx_code_err_frames;
	/* Total number of received frames with error termination */
	uint64_t rx_false_carrier_frames;
	/*
	 * Total number of received frames with a false carrier is
	 * detected during idle, as defined by RX_ER samples active and
	 * RXD is 0xE. The event is reported along with the statistics
	 * generated on the next received frame. Only one false carrier
	 * condition can be detected and logged between frames. Carrier
	 * event, valid for 10M/100M speed modes only.
	 */
	uint64_t rx_ovrsz_frames;
	/* Total number of over-sized frames received */
	uint64_t rx_jbr_frames;
	/* Total number of jabber packets received */
	uint64_t rx_mtu_err_frames;
	/* Total number of received frames with MTU error */
	uint64_t rx_match_crc_frames;
	/* Total number of received frames with CRC match */
	uint64_t rx_promiscuous_frames;
	/* Total number of frames received promiscuously */
	uint64_t rx_tagged_frames;
	/* Total number of received frames with one or two VLAN tags */
	uint64_t rx_double_tagged_frames;
	/* Total number of received frames with two VLAN tags */
	uint64_t rx_trunc_frames;
	/* Total number of truncated frames received */
	uint64_t rx_good_frames;
	/* Total number of good frames	(without errors) received */
	uint64_t rx_pfc_xon2xoff_frames_pri0;
	/*
	 * Total number of received PFC frames with transition from XON
	 * to XOFF on Pri 0
	 */
	uint64_t rx_pfc_xon2xoff_frames_pri1;
	/*
	 * Total number of received PFC frames with transition from XON
	 * to XOFF on Pri 1
	 */
	uint64_t rx_pfc_xon2xoff_frames_pri2;
	/*
	 * Total number of received PFC frames with transition from XON
	 * to XOFF on Pri 2
	 */
	uint64_t rx_pfc_xon2xoff_frames_pri3;
	/*
	 * Total number of received PFC frames with transition from XON
	 * to XOFF on Pri 3
	 */
	uint64_t rx_pfc_xon2xoff_frames_pri4;
	/*
	 * Total number of received PFC frames with transition from XON
	 * to XOFF on Pri 4
	 */
	uint64_t rx_pfc_xon2xoff_frames_pri5;
	/*
	 * Total number of received PFC frames with transition from XON
	 * to XOFF on Pri 5
	 */
	uint64_t rx_pfc_xon2xoff_frames_pri6;
	/*
	 * Total number of received PFC frames with transition from XON
	 * to XOFF on Pri 6
	 */
	uint64_t rx_pfc_xon2xoff_frames_pri7;
	/*
	 * Total number of received PFC frames with transition from XON
	 * to XOFF on Pri 7
	 */
	uint64_t rx_pfc_ena_frames_pri0;
	/*
	 * Total number of received PFC frames with PFC enabled bit for
	 * Pri 0
	 */
	uint64_t rx_pfc_ena_frames_pri1;
	/*
	 * Total number of received PFC frames with PFC enabled bit for
	 * Pri 1
	 */
	uint64_t rx_pfc_ena_frames_pri2;
	/*
	 * Total number of received PFC frames with PFC enabled bit for
	 * Pri 2
	 */
	uint64_t rx_pfc_ena_frames_pri3;
	/*
	 * Total number of received PFC frames with PFC enabled bit for
	 * Pri 3
	 */
	uint64_t rx_pfc_ena_frames_pri4;
	/*
	 * Total number of received PFC frames with PFC enabled bit for
	 * Pri 4
	 */
	uint64_t rx_pfc_ena_frames_pri5;
	/*
	 * Total number of received PFC frames with PFC enabled bit for
	 * Pri 5
	 */
	uint64_t rx_pfc_ena_frames_pri6;
	/*
	 * Total number of received PFC frames with PFC enabled bit for
	 * Pri 6
	 */
	uint64_t rx_pfc_ena_frames_pri7;
	/*
	 * Total number of received PFC frames with PFC enabled bit for
	 * Pri 7
	 */
	uint64_t rx_sch_crc_err_frames;
	/* Total Number of frames received with SCH CRC error */
	uint64_t rx_undrsz_frames;
	/* Total Number of under-sized frames received */
	uint64_t rx_frag_frames;
	/* Total Number of fragmented frames received */
	uint64_t rx_eee_lpi_events;
	/* Total number of RX EEE LPI Events */
	uint64_t rx_eee_lpi_duration;
	/* EEE LPI Duration Counter on RX */
	uint64_t rx_llfc_physical_msgs;
	/*
	 * Total number of physical type Link Level Flow Control	(LLFC)
	 * messages received
	 */
	uint64_t rx_llfc_logical_msgs;
	/*
	 * Total number of logical type Link Level Flow Control	(LLFC)
	 * messages received
	 */
	uint64_t rx_llfc_msgs_with_crc_err;
	/*
	 * Total number of logical type Link Level Flow Control	(LLFC)
	 * messages received with CRC error
	 */
	uint64_t rx_hcfc_msgs;
	/* Total number of HCFC messages received */
	uint64_t rx_hcfc_msgs_with_crc_err;
	/* Total number of HCFC messages received with CRC error */
	uint64_t rx_bytes;
	/* Total number of received bytes */
	uint64_t rx_runt_bytes;
	/* Total number of bytes received in runt frames */
	uint64_t rx_runt_frames;
	/* Total number of runt frames received */
	uint64_t rx_stat_discard;
	/* Total Rx Discards per Port reported by STATS block */
	uint64_t rx_stat_err;
	/* Total Rx Error Drops per Port reported by STATS block */
} __attribute__((packed));

/* Periodic Statistics Context DMA to host	(160 bytes) */
/*
 * per-context HW statistics -- chip view
 */

struct ctx_hw_stats64 {
	uint64_t rx_ucast_pkts;
	uint64_t rx_mcast_pkts;
	uint64_t rx_bcast_pkts;
	uint64_t rx_drop_pkts;
	uint64_t rx_discard_pkts;
	uint64_t rx_ucast_bytes;
	uint64_t rx_mcast_bytes;
	uint64_t rx_bcast_bytes;

	uint64_t tx_ucast_pkts;
	uint64_t tx_mcast_pkts;
	uint64_t tx_bcast_pkts;
	uint64_t tx_drop_pkts;
	uint64_t tx_discard_pkts;
	uint64_t tx_ucast_bytes;
	uint64_t tx_mcast_bytes;
	uint64_t tx_bcast_bytes;

	uint64_t tpa_pkts;
	uint64_t tpa_bytes;
	uint64_t tpa_events;
	uint64_t tpa_aborts;
} __attribute__((packed));

#endif /* _HSI_STRUCT_DEF_DPDK_ */