Feature: 19.04 part 1

Change-Id: Ibba924b8deca1f246b9dcb12d89d085b6fd33046
Signed-off-by: charan makkina <charan795m@gmail.com>

26 files changed, 0 insertions, 5810 deletions

diff --git a/stacks/lwip_stack/release/configure/ip_data.json b/stacks/lwip_stack/release/configure/ip_data.json
deleted file mode 100644
index 1d52b77..0000000
--- a/stacks/lwip_stack/release/configure/ip_data.json
+++ /dev/null
@@ -1,8 +0,0 @@
-{
-  "ports_list": [
-    {
-      "port_name": "PortA",
-      "ip_cidr": ["192.168.1.207/24"]
-    }
-  ]
-}
diff --git a/stacks/lwip_stack/release/configure/nStackConfig.json b/stacks/lwip_stack/release/configure/nStackConfig.json
deleted file mode 100644
index 3cc54c5..0000000
--- a/stacks/lwip_stack/release/configure/nStackConfig.json
+++ /dev/null
@@ -1,32 +0,0 @@
-{
-"cfg_seg_socket": [
-{
-		"socket_num": 8192,
-		"arp_stale_time": 300,
-		"arp_bc_retrans_num": 5
-}
-],
-"cfg_seg_log": [
-{
-		"run_log_size": 50,
-		"run_log_count": 10,
-		"mon_log_size": 10,
-		"mon_log_count": 10
-}
-],
-"cfg_seg_thread_pri": [
-{
-    "comment":"0:SCHED_OTHER, 1:SCHED_FIFO, 2:SCHED_RR",
-		"sched_policy": 0,
-		"thread_pri": 0
-}
-],
-"cfg_seg_path": [
-{
-		"stackpool_log_path": "/var/log/nStack",
-		"master_log_path": "/var/log/nStack",
-		"nstack_log_path": "/var/log/nStack",
-		"dpdk_log_path": "/var/log/nstack-dpdk"
-}
-]
-}
diff --git a/stacks/lwip_stack/release/configure/network_data_tonStack.json b/stacks/lwip_stack/release/configure/network_data_tonStack.json
deleted file mode 100644
index 7b734b0..0000000
--- a/stacks/lwip_stack/release/configure/network_data_tonStack.json
+++ /dev/null
@@ -1,16 +0,0 @@
-[
-  {
-    "name": "network1",
-    "type": "nstack-dpdk",
-    "ipam": {
-      "subnet": "192.168.1.1/24"
-    },
-    "args": {
-      "phynet": {
-        "ref_nic": [
-          "eth7"
-        ]
-      }
-    }
-  },
-]
diff --git a/stacks/lwip_stack/release/include/nstack_custom_api.h b/stacks/lwip_stack/release/include/nstack_custom_api.h
deleted file mode 100644
index e6cae1e..0000000
--- a/stacks/lwip_stack/release/include/nstack_custom_api.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
-*
-* Copyright (c) 2018 Huawei Technologies Co.,Ltd.
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at:
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*/
-
-#ifndef  __NSTACK_CUSTOM_API_H__
-#define __NSTACK_CUSTOM_API_H__
-
-/*****************************************************************************
-*   Prototype    : create a custom socket ,when using this type .
-*****************************************************************************/
-#ifndef SOCK_NS_CUSTOM
-#define SOCK_NS_CUSTOM  0xf001
-#endif
-
-/*****************************************************************************
-*   Prototype    :  setsockopt level type
-*****************************************************************************/
-enum
-{
-  NSTACK_SOCKOPT = 0xff02
-};
-
-/*****************************************************************************
-*   Prototype    :  setsockopt optname type
-*****************************************************************************/
-enum
-{
-  NSTACK_SEM_SLEEP = 0X0001
-};
-#endif
diff --git a/stacks/lwip_stack/release/lib64/.gitkeep b/stacks/lwip_stack/release/lib64/.gitkeep
deleted file mode 100644
index e69de29..0000000
--- a/stacks/lwip_stack/release/lib64/.gitkeep
+++ /dev/null
diff --git a/stacks/lwip_stack/release/lwip_helper_files/arch/queue.c b/stacks/lwip_stack/release/lwip_helper_files/arch/queue.c
deleted file mode 100644
index 4916dae..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/arch/queue.c
+++ /dev/null
@@ -1,120 +0,0 @@
-#include <pthread.h>
-#include "lwip/memp.h"
-#include "lwip/mem.h"
-
-#include "arch/queue.h"
-#include "lwip/sys.h"
-#include "nstack_log.h"
-#include "lwip/sockets.h"
-#include "stackx_spl_share.h"
-#include "lwip/api.h"
-#include "lwip/ip.h"
-#include <netif/sc_dpdk.h>
-
-err_t
-queue_push (queue_t * q, void *pmsg, int isTrypush)
-{
-  int pushRet;
-  // struct tcpip_msg* _msg = pmsg;
-
-  //enum tcpip_msg_type tcpip_type = TCPIP_MSG_MAX;
-  //struct new_api_msg* lo_newapimsg = NULL;
-  // enum api_msg_type api_type = NEW_MSG_API_MAX;
-  // struct netconn *lo_conn = NULL;
-  //u64_t tcp_tx_bytes = 0;
-  while (1)
-    {
-      pushRet = nsfw_mem_ring_enqueue (q->llring, pmsg);
-
-      switch (pushRet)
-        {
-
-        case -1:
-          NSSOC_LOGERR ("Box range check has failed]llring_a=%p, msg=%p",
-                        q->llring, pmsg);
-          return ERR_MEM;
-
-        case 1:
-          return ERR_OK;
-
-        default:
-          if (isTrypush)
-            {
-              return ERR_MEM;
-            }
-          else
-            {
-              continue;
-            }
-        }
-    }
-}
-
-void *
-queue_pop (queue_t * q, u32_t * timeout, int isTryPop)
-{
-  void *pmsg;
-  int popRet;
-  int retVal;
-  u32_t ellapsetime = 0;
-//    struct tcpip_msg* _msg;
-  struct timespec starttm = { 0 };
-  struct timespec endtm;
-  u32_t timeDiff;
-  if (*timeout != 0)
-    {
-      retVal = clock_gettime (CLOCK_MONOTONIC, &starttm);
-      if (0 != retVal)
-        {
-          NSPOL_LOGERR ("clock_gettime() failed]");
-          *timeout = SYS_ARCH_TIMEOUT;
-          return NULL;
-        }
-    }
-
-  while (1)
-    {
-      //TODO:May have to consider, take out the data sharing problem
-      popRet = nsfw_mem_ring_dequeue (q->llring, &pmsg);
-
-      switch (popRet)
-        {
-        case 1:
-          *timeout = ellapsetime;
-          return pmsg;
-
-        default:
-
-          if (isTryPop)
-            {
-              *timeout = SYS_ARCH_TIMEOUT;
-              return NULL;
-            }
-          else
-            {
-              if (*timeout != 0)
-                {
-                  retVal = clock_gettime (CLOCK_MONOTONIC, &endtm);
-                  if (0 != retVal)
-                    {
-                      NSPOL_LOGERR ("clock_gettime() failed]");
-                      *timeout = SYS_ARCH_TIMEOUT;
-                      return NULL;
-                    }
-
-                  timeDiff = endtm.tv_sec - starttm.tv_sec;
-                  if (timeDiff > *timeout)
-                    {
-                      *timeout = SYS_ARCH_TIMEOUT;
-                      return NULL;
-                    }
-                  sys_sleep_ns (0, 100000);
-                }
-
-              continue;
-            }
-
-        }
-    }
-
-}
diff --git a/stacks/lwip_stack/release/lwip_helper_files/arch/sys_arch.c b/stacks/lwip_stack/release/lwip_helper_files/arch/sys_arch.c
deleted file mode 100644
index bdda4d2..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/arch/sys_arch.c
+++ /dev/null
@@ -1,237 +0,0 @@
-#include <sys/queue.h>
-
-#include <unistd.h>
-#include <stdlib.h>
-#include <string.h>
-#include <stdio.h>
-#include <errno.h>
-#include <stdint.h>
-
-#include <pthread.h>
-#include <sys/time.h>
-#include <time.h>
-#include <linux/sched.h>
-
-#include <asm/unistd.h>
-#include <linux/unistd.h>
-#include <syscall.h>
-
-#include <lwip/sys.h>
-#include <cc.h>
-#include <arch/sys_arch.h>
-#include <arch/queue.h>
-#include "nstack_log.h"
-#include "lwip/sockets.h"
-#include "spl_timers.h"
-#include "nstack_securec.h"
-#include "nstack_share_res.h"
-#include "nstack_log.h"
-
-#include "stackx_spl_share.h"
-#include "lwip/api.h"
-#include "lwip/ip.h"
-#include <netif/sc_dpdk.h>
-#include <netif/sharedmemory.h>
-
-#include "common_mem_common.h"
-#include "common_func.h"
-#include "common_mem_api.h"
-
-#include "mgr_com.h"
-#ifdef HAL_LIB
-#else
-#include "rte_ring.h"
-#endif
-
-#include "timeouts.h"
-
-sys_sem_st g_global_semaphore;
-
-/** Check if an mbox is valid/allocated: return 1 for valid, 0 for invalid */
-int
-sys_mbox_valid (sys_mbox_t * mbox)
-{
-  return ((*mbox == SYS_MBOX_NULL) ? 0 : 1);
-}
-
-struct lwip_thread
-{
-  void (*func) (void *arg);
-  void *arg;
-};
-
-static void *
-lwip_thread_entry (void *arg)
-{
-  struct lwip_thread *lt = arg;
-
-  lt->func (lt->arg);
-
-  free (lt);
-  return 0;
-}
-
-/** The only thread function:
- * Creates a new thread
- * @param name human-readable name for the thread (used for debugging purposes)
- * @param thread thread-function
- * @param arg parameter passed to 'thread'
- * @param stacksize stack size in bytes for the new thread (may be ignored by ports)
- * @param prio priority of the new thread (may be ignored by ports) */
-sys_thread_t
-sys_thread_new2 (const char *name, lwip_thread_fn thread, void *arg,
-                 int stacksize, int prio, int policy)
-{
-  pthread_attr_t attr;
-  set_thread_attr (&attr, stacksize, prio, policy);
-
-  struct lwip_thread *lt = malloc (sizeof (*lt));
-  if (lt == NULL)
-    {
-      NSPOL_LOGERR ("process abort:cannot allocate thread struct");
-      abort ();
-    }
-
-  lt->func = thread;
-  lt->arg = arg;
-
-  pthread_t t;
-  int r = pthread_create (&t, &attr, lwip_thread_entry, lt);
-
-  if (r != 0)
-    {
-      NSPOL_LOGERR ("process abort:lwip:annot create]errno_string=%s",
-                    strerror (r));
-      abort ();
-    }
-  else
-    {
-      NSPOL_LOGINF (SC_DPDK_INFO, "]thread_name=%s.", name);
-    }
-
-  (void) pthread_setname_np (t, name);
-
-  return t;
-}
-
-/** The only thread function:
- * Creates a new thread
- * @param name human-readable name for the thread (used for debugging purposes)
- * @param thread thread-function
- * @param arg parameter passed to 'thread'
- * @param stacksize stack size in bytes for the new thread (may be ignored by ports)
- * @param prio priority of the new thread (may be ignored by ports) */
-sys_thread_t
-sys_thread_new (const char *name, lwip_thread_fn thread, void *arg,
-                int stacksize, int prio)
-{
-  pthread_attr_t attr;
-  set_thread_attr (&attr, stacksize, prio, 0);
-
-  struct lwip_thread *lt = malloc (sizeof (*lt));
-  if (lt == NULL)
-    {
-      NSPOL_LOGERR ("process abort:cannot allocate thread struct");
-      abort ();
-    }
-
-  lt->func = thread;
-  lt->arg = arg;
-
-  pthread_t t;
-  int r = pthread_create (&t, &attr, lwip_thread_entry, lt);
-
-  if (r != 0)
-    {
-      NSPOL_LOGERR ("process abort:lwip:annot create]errno_string=%s",
-                    strerror (r));
-      abort ();
-    }
-  else
-    {
-      NSPOL_LOGINF (SC_DPDK_INFO, "]thread_name=%s.", name);
-    }
-
-  (void) pthread_setname_np (t, name);
-
-  return t;
-}
-
-void
-stackx_global_lock (void)
-{
-  sys_arch_lock_with_pid (&g_global_semaphore);
-}
-
-void
-stackx_global_unlock (void)
-{
-  sys_sem_s_signal (&g_global_semaphore);
-}
-
-void
-sys_init (void)
-{
-  return;
-}
-
-void
-sys_timeouts_mbox_fetch (sys_mbox_t * mbox, void **msg)
-{
-  return;
-}
-
-void
-sys_timeout (u32_t msecs, sys_timeout_handler handler, void *arg)
-{
-  struct ptimer_node *tmo = arg;
-
-  tmo = malloc (sizeof (struct ptimer_node));   /*lint !e586 */
-  if (NULL == tmo)
-    {
-      NSPOL_LOGERR ("malloc ptimer node failed!");
-      return;
-    }
-
-  int ret = MEMSET_S (tmo, sizeof (struct ptimer_node), 0,
-                      sizeof (struct ptimer_node));
-  if (EOK != ret)
-    {
-      NSPOL_LOGERR ("MEMSET_S failed]ret=%d", ret);
-      free (tmo);
-      return;
-    }
-
-  NSPOL_LOGDBG (TIMERS_DEBUG, "alloc]ptimer_node=%p", tmo);
-
-  tmo->info.msec = msecs;
-  tmo->info._phandle = handler;
-  tmo->info.ctx = arg;
-  tmo->info.flags = PTIMER_ONESHOT;
-  tmo->index = 0;
-  regedit_ptimer (SYS_PTIMEROUT_MSG, handler, tmo);
-}
-
-void
-sys_untimeout (sys_timeout_handler handler, void *arg)
-{
-  regedit_ptimer (SYS_UNPTIMEROUT_MSG, handler, arg);
-  return;
-}
-
-/**
- * Timer callback function that calls mld6_tmr() and reschedules itself.
- *
- * @param arg unused argument
- */
-void
-cyclic_timer (void *arg)
-{
-  const struct lwip_cyclic_timer *cyclic =
-    (const struct lwip_cyclic_timer *) arg;
-#if LWIP_DEBUG_TIMERNAMES
-  LWIP_DEBUGF (TIMERS_DEBUG, ("tcpip: %s()\n", cyclic->handler_name));
-#endif
-  cyclic->handler ();
-  sys_timeout (cyclic->interval_ms, cyclic_timer, arg);
-}
diff --git a/stacks/lwip_stack/release/lwip_helper_files/core/timeouts.c b/stacks/lwip_stack/release/lwip_helper_files/core/timeouts.c
deleted file mode 100644
index efbda94..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/core/timeouts.c
+++ /dev/null
@@ -1,527 +0,0 @@
-/**
- * @file
- * Stack-internal timers implementation.
- * This file includes timer callbacks for stack-internal timers as well as
- * functions to set up or stop timers and check for expired timers.
- *
- */
-
-/*
- * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * This file is part of the lwIP TCP/IP stack.
- *
- * Author: Adam Dunkels <adam@sics.se>
- *         Simon Goldschmidt
- *
- */
-
-#include "lwip/opt.h"
-
-#include "lwip/timeouts.h"
-#include "lwip/priv/tcp_priv.h"
-
-#include "lwip/def.h"
-#include "lwip/memp.h"
-#include "lwip/priv/tcpip_priv.h"
-
-#include "lwip/ip4_frag.h"
-#include "lwip/etharp.h"
-#include "lwip/dhcp.h"
-#include "lwip/autoip.h"
-#include "lwip/igmp.h"
-#include "lwip/dns.h"
-#include "lwip/nd6.h"
-#include "lwip/ip6_frag.h"
-#include "lwip/mld6.h"
-#include "lwip/sys.h"
-#include "lwip/pbuf.h"
-
-#if LWIP_DEBUG_TIMERNAMES
-#define HANDLER(x) x, #x
-#else /* LWIP_DEBUG_TIMERNAMES */
-#define HANDLER(x) x
-#endif /* LWIP_DEBUG_TIMERNAMES */
-
-/** This array contains all stack-internal cyclic timers. To get the number of
- * timers, use LWIP_ARRAYSIZE() */
-const struct lwip_cyclic_timer lwip_cyclic_timers[] = {
-#if LWIP_TCP
-  /* The TCP timer is a special case: it does not have to run always and
-     is triggered to start from TCP using tcp_timer_needed() */
-  {TCP_TMR_INTERVAL, HANDLER (tcp_tmr)},
-#endif /* LWIP_TCP */
-#if LWIP_IPV4
-#if IP_REASSEMBLY
-  {IP_TMR_INTERVAL, HANDLER (ip_reass_tmr)},
-#endif /* IP_REASSEMBLY */
-#if LWIP_ARP
-  {ARP_TMR_INTERVAL, HANDLER (etharp_tmr)},
-#endif /* LWIP_ARP */
-#if LWIP_DHCP
-  {DHCP_COARSE_TIMER_MSECS, HANDLER (dhcp_coarse_tmr)},
-  {DHCP_FINE_TIMER_MSECS, HANDLER (dhcp_fine_tmr)},
-#endif /* LWIP_DHCP */
-#if LWIP_AUTOIP
-  {AUTOIP_TMR_INTERVAL, HANDLER (autoip_tmr)},
-#endif /* LWIP_AUTOIP */
-#if LWIP_IGMP
-  {IGMP_TMR_INTERVAL, HANDLER (igmp_tmr)},
-#endif /* LWIP_IGMP */
-#endif /* LWIP_IPV4 */
-#if LWIP_DNS
-  {DNS_TMR_INTERVAL, HANDLER (dns_tmr)},
-#endif /* LWIP_DNS */
-#if LWIP_IPV6
-  {ND6_TMR_INTERVAL, HANDLER (nd6_tmr)},
-#if LWIP_IPV6_REASS
-  {IP6_REASS_TMR_INTERVAL, HANDLER (ip6_reass_tmr)},
-#endif /* LWIP_IPV6_REASS */
-#if LWIP_IPV6_MLD
-  {MLD6_TMR_INTERVAL, HANDLER (mld6_tmr)},
-#endif /* LWIP_IPV6_MLD */
-#endif /* LWIP_IPV6 */
-};
-
-#if LWIP_TIMERS && !LWIP_TIMERS_CUSTOM
-
-/** The one and only timeout list */
-static struct sys_timeo *next_timeout;
-static u32_t timeouts_last_time;
-
-#if LWIP_TCP
-/** global variable that shows if the tcp timer is currently scheduled or not */
-static int tcpip_tcp_timer_active;
-
-/**
- * Timer callback function that calls tcp_tmr() and reschedules itself.
- *
- * @param arg unused argument
- */
-static void
-tcpip_tcp_timer (void *arg)
-{
-  LWIP_UNUSED_ARG (arg);
-
-  /* call TCP timer handler */
-  tcp_tmr ();
-  /* timer still needed? */
-  if (tcp_active_pcbs || tcp_tw_pcbs)
-    {
-      /* restart timer */
-      sys_timeout (TCP_TMR_INTERVAL, tcpip_tcp_timer, NULL);
-    }
-  else
-    {
-      /* disable timer */
-      tcpip_tcp_timer_active = 0;
-    }
-}
-
-/**
- * Called from TCP_REG when registering a new PCB:
- * the reason is to have the TCP timer only running when
- * there are active (or time-wait) PCBs.
- */
-void
-tcp_timer_needed (void)
-{
-  /* timer is off but needed again? */
-  if (!tcpip_tcp_timer_active && (tcp_active_pcbs || tcp_tw_pcbs))
-    {
-      /* enable and start timer */
-      tcpip_tcp_timer_active = 1;
-      sys_timeout (TCP_TMR_INTERVAL, tcpip_tcp_timer, NULL);
-    }
-}
-#endif /* LWIP_TCP */
-
-/**
- * Timer callback function that calls mld6_tmr() and reschedules itself.
- *
- * @param arg unused argument
- */
-static void
-cyclic_timer (void *arg)
-{
-  const struct lwip_cyclic_timer *cyclic =
-    (const struct lwip_cyclic_timer *) arg;
-#if LWIP_DEBUG_TIMERNAMES
-  LWIP_DEBUGF (TIMERS_DEBUG, ("tcpip: %s()\n", cyclic->handler_name));
-#endif
-  cyclic->handler ();
-  sys_timeout (cyclic->interval_ms, cyclic_timer, arg);
-}
-
-/** Initialize this module */
-void
-sys_timeouts_init (void)
-{
-  size_t i;
-  /* tcp_tmr() at index 0 is started on demand */
-  for (i = (LWIP_TCP ? 1 : 0); i < LWIP_ARRAYSIZE (lwip_cyclic_timers); i++)
-    {
-      /* we have to cast via size_t to get rid of const warning
-         (this is OK as cyclic_timer() casts back to const* */
-      sys_timeout (lwip_cyclic_timers[i].interval_ms, cyclic_timer,
-                   LWIP_CONST_CAST (void *, &lwip_cyclic_timers[i]));
-    }
-
-  /* Initialise timestamp for sys_check_timeouts */
-  timeouts_last_time = sys_now ();
-}
-
-/**
- * Create a one-shot timer (aka timeout). Timeouts are processed in the
- * following cases:
- * - while waiting for a message using sys_timeouts_mbox_fetch()
- * - by calling sys_check_timeouts() (NO_SYS==1 only)
- *
- * @param msecs time in milliseconds after that the timer should expire
- * @param handler callback function to call when msecs have elapsed
- * @param arg argument to pass to the callback function
- */
-#if LWIP_DEBUG_TIMERNAMES
-void
-sys_timeout_debug (u32_t msecs, sys_timeout_handler handler, void *arg,
-                   const char *handler_name)
-#else /* LWIP_DEBUG_TIMERNAMES */
-void
-sys_timeout (u32_t msecs, sys_timeout_handler handler, void *arg)
-#endif                          /* LWIP_DEBUG_TIMERNAMES */
-{
-  struct sys_timeo *timeout, *t;
-  u32_t now, diff;
-
-  timeout = (struct sys_timeo *) memp_malloc (MEMP_SYS_TIMEOUT);
-  if (timeout == NULL)
-    {
-      LWIP_ASSERT
-        ("sys_timeout: timeout != NULL, pool MEMP_SYS_TIMEOUT is empty",
-         timeout != NULL);
-      return;
-    }
-
-  now = sys_now ();
-  if (next_timeout == NULL)
-    {
-      diff = 0;
-      timeouts_last_time = now;
-    }
-  else
-    {
-      diff = now - timeouts_last_time;
-    }
-
-  timeout->next = NULL;
-  timeout->h = handler;
-  timeout->arg = arg;
-  timeout->time = msecs + diff;
-#if LWIP_DEBUG_TIMERNAMES
-  timeout->handler_name = handler_name;
-  LWIP_DEBUGF (TIMERS_DEBUG,
-               ("sys_timeout: %p msecs=%" U32_F " handler=%s arg=%p\n",
-                (void *) timeout, msecs, handler_name, (void *) arg));
-#endif /* LWIP_DEBUG_TIMERNAMES */
-
-  if (next_timeout == NULL)
-    {
-      next_timeout = timeout;
-      return;
-    }
-
-  if (next_timeout->time > msecs)
-    {
-      next_timeout->time -= msecs;
-      timeout->next = next_timeout;
-      next_timeout = timeout;
-    }
-  else
-    {
-      for (t = next_timeout; t != NULL; t = t->next)
-        {
-          timeout->time -= t->time;
-          if (t->next == NULL || t->next->time > timeout->time)
-            {
-              if (t->next != NULL)
-                {
-                  t->next->time -= timeout->time;
-                }
-              else if (timeout->time > msecs)
-                {
-                  /* If this is the case, 'timeouts_last_time' and 'now' differs too much.
-                     This can be due to sys_check_timeouts() not being called at the right
-                     times, but also when stopping in a breakpoint. Anyway, let's assume
-                     this is not wanted, so add the first timer's time instead of 'diff' */
-                  timeout->time = msecs + next_timeout->time;
-                }
-              timeout->next = t->next;
-              t->next = timeout;
-              break;
-            }
-        }
-    }
-}
-
-/**
- * Go through timeout list (for this task only) and remove the first matching
- * entry (subsequent entries remain untouched), even though the timeout has not
- * triggered yet.
- *
- * @param handler callback function that would be called by the timeout
- * @param arg callback argument that would be passed to handler
-*/
-void
-sys_untimeout (sys_timeout_handler handler, void *arg)
-{
-  struct sys_timeo *prev_t, *t;
-
-  if (next_timeout == NULL)
-    {
-      return;
-    }
-
-  for (t = next_timeout, prev_t = NULL; t != NULL; prev_t = t, t = t->next)
-    {
-      if ((t->h == handler) && (t->arg == arg))
-        {
-          /* We have a match */
-          /* Unlink from previous in list */
-          if (prev_t == NULL)
-            {
-              next_timeout = t->next;
-            }
-          else
-            {
-              prev_t->next = t->next;
-            }
-          /* If not the last one, add time of this one back to next */
-          if (t->next != NULL)
-            {
-              t->next->time += t->time;
-            }
-          memp_free (MEMP_SYS_TIMEOUT, t);
-          return;
-        }
-    }
-  return;
-}
-
-/**
- * @ingroup lwip_nosys
- * Handle timeouts for NO_SYS==1 (i.e. without using
- * tcpip_thread/sys_timeouts_mbox_fetch(). Uses sys_now() to call timeout
- * handler functions when timeouts expire.
- *
- * Must be called periodically from your main loop.
- */
-#if !NO_SYS && !defined __DOXYGEN__
-static
-#endif                          /* !NO_SYS */
-  void
-sys_check_timeouts (void)
-{
-  if (next_timeout)
-    {
-      struct sys_timeo *tmptimeout;
-      u32_t diff;
-      sys_timeout_handler handler;
-      void *arg;
-      u8_t had_one;
-      u32_t now;
-
-      now = sys_now ();
-      /* this cares for wraparounds */
-      diff = now - timeouts_last_time;
-      do
-        {
-          PBUF_CHECK_FREE_OOSEQ ();
-          had_one = 0;
-          tmptimeout = next_timeout;
-          if (tmptimeout && (tmptimeout->time <= diff))
-            {
-              /* timeout has expired */
-              had_one = 1;
-              timeouts_last_time += tmptimeout->time;
-              diff -= tmptimeout->time;
-              next_timeout = tmptimeout->next;
-              handler = tmptimeout->h;
-              arg = tmptimeout->arg;
-#if LWIP_DEBUG_TIMERNAMES
-              if (handler != NULL)
-                {
-                  LWIP_DEBUGF (TIMERS_DEBUG, ("sct calling h=%s arg=%p\n",
-                                              tmptimeout->handler_name, arg));
-                }
-#endif /* LWIP_DEBUG_TIMERNAMES */
-              memp_free (MEMP_SYS_TIMEOUT, tmptimeout);
-              if (handler != NULL)
-                {
-#if !NO_SYS
-                  /* For LWIP_TCPIP_CORE_LOCKING, lock the core before calling the
-                     timeout handler function. */
-                  LOCK_TCPIP_CORE ();
-#endif /* !NO_SYS */
-                  handler (arg);
-#if !NO_SYS
-                  UNLOCK_TCPIP_CORE ();
-#endif /* !NO_SYS */
-                }
-              LWIP_TCPIP_THREAD_ALIVE ();
-            }
-          /* repeat until all expired timers have been called */
-        }
-      while (had_one);
-    }
-}
-
-/** Set back the timestamp of the last call to sys_check_timeouts()
- * This is necessary if sys_check_timeouts() hasn't been called for a long
- * time (e.g. while saving energy) to prevent all timer functions of that
- * period being called.
- */
-void
-sys_restart_timeouts (void)
-{
-  timeouts_last_time = sys_now ();
-}
-
-/** Return the time left before the next timeout is due. If no timeouts are
- * enqueued, returns 0xffffffff
- */
-#if !NO_SYS
-static
-#endif                          /* !NO_SYS */
-  u32_t
-sys_timeouts_sleeptime (void)
-{
-  u32_t diff;
-  if (next_timeout == NULL)
-    {
-      return 0xffffffff;
-    }
-  diff = sys_now () - timeouts_last_time;
-  if (diff > next_timeout->time)
-    {
-      return 0;
-    }
-  else
-    {
-      return next_timeout->time - diff;
-    }
-}
-
-#if !NO_SYS
-
-/**
- * Wait (forever) for a message to arrive in an mbox.
- * While waiting, timeouts are processed.
- *
- * @param mbox the mbox to fetch the message from
- * @param msg the place to store the message
- */
-void
-sys_timeouts_mbox_fetch (sys_mbox_t * mbox, void **msg)
-{
-  u32_t sleeptime;
-
-again:
-  if (!next_timeout)
-    {
-      sys_arch_mbox_fetch (mbox, msg, 0);
-      return;
-    }
-
-  sleeptime = sys_timeouts_sleeptime ();
-  if (sleeptime == 0
-      || sys_arch_mbox_fetch (mbox, msg, sleeptime) == SYS_ARCH_TIMEOUT)
-    {
-      /* If a SYS_ARCH_TIMEOUT value is returned, a timeout occurred
-         before a message could be fetched. */
-      sys_check_timeouts ();
-      /* We try again to fetch a message from the mbox. */
-      goto again;
-    }
-}
-
-#endif /* NO_SYS */
-
-#else /* LWIP_TIMERS && !LWIP_TIMERS_CUSTOM */
-/* Satisfy the TCP code which calls this function */
-static int tcpip_tcp_timer_active;
-
-void
-tcp_timer_needed (void)
-{
-  /* timer is off but needed again? */
-  if (!tcpip_tcp_timer_active && (tcp_active_pcbs || tcp_tw_pcbs))
-    {
-      /* enable and start timer */
-      tcpip_tcp_timer_active = 1;
-      sys_timeout (TCP_TMR_INTERVAL, tcpip_tcp_timer, NULL);
-    }
-}
-
-/**
- * Timer callback function that calls tcp_tmr() and reschedules itself.
- *
- * @param arg unused argument
- */
-void
-tcpip_tcp_timer (void *arg)
-{
-  LWIP_UNUSED_ARG (arg);
-
-  /* call TCP timer handler */
-  tcp_tmr ();
-  /* timer still needed? */
-  if (tcp_active_pcbs || tcp_tw_pcbs)
-    {
-      /* restart timer */
-      sys_timeout (TCP_TMR_INTERVAL, tcpip_tcp_timer, NULL);
-    }
-  else
-    {
-      /* disable timer */
-      tcpip_tcp_timer_active = 0;
-    }
-}
-
-void
-sys_timeouts_init (void)
-{
-  size_t i;
-  /* tcp_tmr() at index 0 is started on demand */
-  for (i = (LWIP_TCP ? 1 : 0); i < LWIP_ARRAYSIZE (lwip_cyclic_timers); i++)
-    {
-      /* we have to cast via size_t to get rid of const warning
-         (this is OK as cyclic_timer() casts back to const* */
-      sys_timeout (lwip_cyclic_timers[i].interval_ms, cyclic_timer,
-                   LWIP_CONST_CAST (void *, &lwip_cyclic_timers[i]));
-    }
-}
-
-#endif /* LWIP_TIMERS && !LWIP_TIMERS_CUSTOM */
diff --git a/stacks/lwip_stack/release/lwip_helper_files/download_lwip.sh b/stacks/lwip_stack/release/lwip_helper_files/download_lwip.sh
deleted file mode 100755
index bbb8afb..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/download_lwip.sh
+++ /dev/null
@@ -1,35 +0,0 @@
-#########################################################################
-# Copyright (c) 2018 Huawei Technologies Co.,Ltd.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#########################################################################
-#!/bin/bash -x
-
-set -x
-
-SCRIPT_DIR=$(dirname "$0")
-echo $SCRIPT_DIR
-LWIP_DOWNLOAD_DIR="${SCRIPT_DIR}/../../lwip_src/"
-echo $LWIP_DOWNLOAD_DIR
-if [ ! -d "${LWIP_DOWNLOAD_DIR}/lwip/" ]; then
-	mkdir -p ${LWIP_DOWNLOAD_DIR}/lwip/
-        cd ${LWIP_DOWNLOAD_DIR}/
-	wget -N --no-check-certificate http://download-mirror.savannah.nongnu.org/releases/lwip/lwip-2.0.3.zip
-	unzip ${LWIP_DOWNLOAD_DIR}/lwip-2.0.3.zip "lwip-2.0.3/src/*" -d ${LWIP_DOWNLOAD_DIR}/lwip
-	mv ${LWIP_DOWNLOAD_DIR}/lwip/lwip-2.0.3/src/* ${LWIP_DOWNLOAD_DIR}/lwip/
-	rm -rf ${LWIP_DOWNLOAD_DIR}/lwip/lwip-2.0.3/
-	cp -r ${SCRIPT_DIR}/arch/ ${LWIP_DOWNLOAD_DIR}/lwip/
-	cp -r ${SCRIPT_DIR}/lwip/arch/ ${LWIP_DOWNLOAD_DIR}/lwip/include/lwip/
-	cp -r ${SCRIPT_DIR}/core/* ${LWIP_DOWNLOAD_DIR}/lwip/core/
-	cp -r ${SCRIPT_DIR}/include/* ${LWIP_DOWNLOAD_DIR}/lwip/include/lwip/
-	mv ${LWIP_DOWNLOAD_DIR}/lwip/include/lwip/errno.h ${LWIP_DOWNLOAD_DIR}/lwip/include/lwip/lwip_errno.h
-fi
diff --git a/stacks/lwip_stack/release/lwip_helper_files/include/lwipopts.h b/stacks/lwip_stack/release/lwip_helper_files/include/lwipopts.h
deleted file mode 100644
index 46c4af2..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/include/lwipopts.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef LWIP_LWIPOPTS_H
-#define LWIP_LWIPOPTS_H
-
-#define RING_CACHE_SIZE 1024
-#define LISTEN_CACHE_SIZE 1024
-#define RECV_MAX_POOL 4
-#define MAX_TRY_GET_MEMORY_TIMES 4
-#define MAX_MEMORY_USED_SIZE 80
-
-#define IP_HLEN             20
-#define TCP_HLEN            20
-#define TCP_MAX_OPTION_LEN  40
-
-#define _cache_aligned __attribute__((__aligned__(64)))
-#define LWIP_NETIF_API 1
-
-#define TCP_OVERSIZE 1
-#define LWIP_DONT_PROVIDE_BYTEORDER_FUNCTIONS
-#define SYS_LIGHTWEIGHT_PROT              1
-#define LWIP_DISABLE_TCP_SANITY_CHECKS    1
-#define LWIP_COMPAT_MUTEX_ALLOWED         1
-#define LWIP_ERRNO_INCLUDE  <errno.h>
-#define LWIP_SKIP_PACKING_CHECK           1
-#define PBUF_POOL_FREE_OOSEQ              0
-
-#define LWIP_DEBUG               1
-#define LWIP_TIMERS              0
-#define LWIP_TIMERS_CUSTOM       1
-#define LWIP_TCPIP_CORE_LOCKING         1
-#define MEM_LIBC_MALLOC                 1
-#define MEMP_MEM_MALLOC                 1
-#define LWIP_CALLBACK_API               1
-#define LWIP_SOCKET                     0
-#define LWIP_POSIX_SOCKETS_IO_NAMES     0
-#define LWIP_TCP_KEEPALIVE              1
-#define LWIP_TIMEVAL_PRIVATE            0
-#define LWIP_COMPAT_MUTEX               1
-#ifdef TCP_MSS
-#undef TCP_MSS
-#endif
-#define TCP_MSS                     1460
-#define TCP_WND                     (20 * TCP_MSS)
-#define TCP_SND_BUF                 (10 * TCP_MSS)
-#define TCP_SND_QUEUELEN            ((20 * (TCP_SND_BUF) + (TCP_MSS - 1))/(TCP_MSS))
-#define LWIP_WND_SCALE              1
-#define TCP_RCV_SCALE               7
-#endif
diff --git a/stacks/lwip_stack/release/lwip_helper_files/include/opt.h b/stacks/lwip_stack/release/lwip_helper_files/include/opt.h
deleted file mode 100644
index 040e9cf..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/include/opt.h
+++ /dev/null
@@ -1,2875 +0,0 @@
-/**
- * @file
- *
- * lwIP Options Configuration
- */
-
-/*
- * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * This file is part of the lwIP TCP/IP stack.
- *
- * Author: Adam Dunkels <adam@sics.se>
- *
- */
-
-/*
- * NOTE: || defined __DOXYGEN__ is a workaround for doxygen bug -
- * without this, doxygen does not see the actual #define
- */
-
-#if !defined LWIP_HDR_OPT_H
-#define LWIP_HDR_OPT_H
-
-/*
- * Include user defined options first. Anything not defined in these files
- * will be set to standard values. Override anything you don't like!
- */
-#include "lwipopts.h"
-#include "lwip/debug.h"
-
-/**
- * @defgroup lwip_opts Options (lwipopts.h)
- * @ingroup lwip
- *
- * @defgroup lwip_opts_debug Debugging
- * @ingroup lwip_opts
- *
- * @defgroup lwip_opts_infrastructure Infrastructure
- * @ingroup lwip_opts
- *
- * @defgroup lwip_opts_callback Callback-style APIs
- * @ingroup lwip_opts
- *
- * @defgroup lwip_opts_threadsafe_apis Thread-safe APIs
- * @ingroup lwip_opts
- */
-
- /*
-    ------------------------------------
-    -------------- NO SYS --------------
-    ------------------------------------
-  */
-/**
- * @defgroup lwip_opts_nosys NO_SYS
- * @ingroup lwip_opts_infrastructure
- * @{
- */
-/**
- * NO_SYS==1: Use lwIP without OS-awareness (no thread, semaphores, mutexes or
- * mboxes). This means threaded APIs cannot be used (socket, netconn,
- * i.e. everything in the 'api' folder), only the callback-style raw API is
- * available (and you have to watch out for yourself that you don't access
- * lwIP functions/structures from more than one context at a time!)
- */
-#if !defined NO_SYS || defined __DOXYGEN__
-#define NO_SYS                          0
-#endif
-/**
- * @}
- */
-
-/**
- * @defgroup lwip_opts_timers Timers
- * @ingroup lwip_opts_infrastructure
- * @{
- */
-/**
- * LWIP_TIMERS==0: Drop support for sys_timeout and lwip-internal cyclic timers.
- * (the array of lwip-internal cyclic timers is still provided)
- * (check NO_SYS_NO_TIMERS for compatibility to old versions)
- */
-#if !defined LWIP_TIMERS || defined __DOXYGEN__
-#ifdef NO_SYS_NO_TIMERS
-#define LWIP_TIMERS                     (!NO_SYS || (NO_SYS && !NO_SYS_NO_TIMERS))
-#else
-#define LWIP_TIMERS                     1
-#endif
-#endif
-
-/**
- * LWIP_TIMERS_CUSTOM==1: Provide your own timer implementation.
- * Function prototypes in timeouts.h and the array of lwip-internal cyclic timers
- * are still included, but the implementation is not. The following functions
- * will be required: sys_timeouts_init(), sys_timeout(), sys_untimeout(),
- *                   sys_timeouts_mbox_fetch()
- */
-#if !defined LWIP_TIMERS_CUSTOM || defined __DOXYGEN__
-#define LWIP_TIMERS_CUSTOM              0
-#endif
-/**
- * @}
- */
-
-/**
- * @defgroup lwip_opts_memcpy memcpy
- * @ingroup lwip_opts_infrastructure
- * @{
- */
-/**
- * MEMCPY: override this if you have a faster implementation at hand than the
- * one included in your C library
- */
-#if !defined MEMCPY || defined __DOXYGEN__
-#define MEMCPY(dst,src,len)             memcpy(dst,src,len)
-#endif
-
-/**
- * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a
- * call to memcpy() if the length is known at compile time and is small.
- */
-#if !defined SMEMCPY || defined __DOXYGEN__
-#define SMEMCPY(dst,src,len)            memcpy(dst,src,len)
-#endif
-/**
- * @}
- */
-
-/*
-   ------------------------------------
-   ----------- Core locking -----------
-   ------------------------------------
-*/
-/**
- * @defgroup lwip_opts_lock Core locking and MPU
- * @ingroup lwip_opts_infrastructure
- * @{
- */
-/**
- * LWIP_MPU_COMPATIBLE: enables special memory management mechanism
- * which makes lwip able to work on MPU (Memory Protection Unit) system
- * by not passing stack-pointers to other threads
- * (this decreases performance as memory is allocated from pools instead
- * of keeping it on the stack)
- */
-#if !defined LWIP_MPU_COMPATIBLE || defined __DOXYGEN__
-#define LWIP_MPU_COMPATIBLE             0
-#endif
-
-/**
- * LWIP_TCPIP_CORE_LOCKING
- * Creates a global mutex that is held during TCPIP thread operations.
- * Can be locked by client code to perform lwIP operations without changing
- * into TCPIP thread using callbacks. See LOCK_TCPIP_CORE() and
- * UNLOCK_TCPIP_CORE().
- * Your system should provide mutexes supporting priority inversion to use this.
- */
-#if !defined LWIP_TCPIP_CORE_LOCKING || defined __DOXYGEN__
-#define LWIP_TCPIP_CORE_LOCKING         1
-#endif
-
-/**
- * LWIP_TCPIP_CORE_LOCKING_INPUT: when LWIP_TCPIP_CORE_LOCKING is enabled,
- * this lets tcpip_input() grab the mutex for input packets as well,
- * instead of allocating a message and passing it to tcpip_thread.
- *
- * ATTENTION: this does not work when tcpip_input() is called from
- * interrupt context!
- */
-#if !defined LWIP_TCPIP_CORE_LOCKING_INPUT || defined __DOXYGEN__
-#define LWIP_TCPIP_CORE_LOCKING_INPUT   0
-#endif
-
-/**
- * SYS_LIGHTWEIGHT_PROT==1: enable inter-task protection (and task-vs-interrupt
- * protection) for certain critical regions during buffer allocation, deallocation
- * and memory allocation and deallocation.
- * ATTENTION: This is required when using lwIP from more than one context! If
- * you disable this, you must be sure what you are doing!
- */
-#if !defined SYS_LIGHTWEIGHT_PROT || defined __DOXYGEN__
-#define SYS_LIGHTWEIGHT_PROT            1
-#endif
-/**
- * @}
- */
-
-/*
-   ------------------------------------
-   ---------- Memory options ----------
-   ------------------------------------
-*/
-/**
- * @defgroup lwip_opts_mem Heap and memory pools
- * @ingroup lwip_opts_infrastructure
- * @{
- */
-/**
- * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library
- * instead of the lwip internal allocator. Can save code size if you
- * already use it.
- */
-#if !defined MEM_LIBC_MALLOC || defined __DOXYGEN__
-#define MEM_LIBC_MALLOC                 0
-#endif
-
-/**
- * MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator.
- * Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution
- * speed (heap alloc can be much slower than pool alloc) and usage from interrupts
- * (especially if your netif driver allocates PBUF_POOL pbufs for received frames
- * from interrupt)!
- * ATTENTION: Currently, this uses the heap for ALL pools (also for private pools,
- * not only for internal pools defined in memp_std.h)!
- */
-#if !defined MEMP_MEM_MALLOC || defined __DOXYGEN__
-#define MEMP_MEM_MALLOC                 0
-#endif
-
-/**
- * MEM_ALIGNMENT: should be set to the alignment of the CPU
- *    4 byte alignment -> \#define MEM_ALIGNMENT 4
- *    2 byte alignment -> \#define MEM_ALIGNMENT 2
- */
-#if !defined MEM_ALIGNMENT || defined __DOXYGEN__
-#define MEM_ALIGNMENT                   1
-#endif
-
-/**
- * MEM_SIZE: the size of the heap memory. If the application will send
- * a lot of data that needs to be copied, this should be set high.
- */
-#if !defined MEM_SIZE || defined __DOXYGEN__
-#define MEM_SIZE                        1600
-#endif
-
-/**
- * MEMP_OVERFLOW_CHECK: memp overflow protection reserves a configurable
- * amount of bytes before and after each memp element in every pool and fills
- * it with a prominent default value.
- *    MEMP_OVERFLOW_CHECK == 0 no checking
- *    MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed
- *    MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time
- *      memp_malloc() or memp_free() is called (useful but slow!)
- */
-#if !defined MEMP_OVERFLOW_CHECK || defined __DOXYGEN__
-#define MEMP_OVERFLOW_CHECK             0
-#endif
-
-/**
- * MEMP_SANITY_CHECK==1: run a sanity check after each memp_free() to make
- * sure that there are no cycles in the linked lists.
- */
-#if !defined MEMP_SANITY_CHECK || defined __DOXYGEN__
-#define MEMP_SANITY_CHECK               0
-#endif
-
-/**
- * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set
- * of memory pools of various sizes. When mem_malloc is called, an element of
- * the smallest pool that can provide the length needed is returned.
- * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled.
- */
-#if !defined MEM_USE_POOLS || defined __DOXYGEN__
-#define MEM_USE_POOLS                   0
-#endif
-
-/**
- * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next
- * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more
- * reliable. */
-#if !defined MEM_USE_POOLS_TRY_BIGGER_POOL || defined __DOXYGEN__
-#define MEM_USE_POOLS_TRY_BIGGER_POOL   0
-#endif
-
-/**
- * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h
- * that defines additional pools beyond the "standard" ones required
- * by lwIP. If you set this to 1, you must have lwippools.h in your
- * include path somewhere.
- */
-#if !defined MEMP_USE_CUSTOM_POOLS || defined __DOXYGEN__
-#define MEMP_USE_CUSTOM_POOLS           0
-#endif
-
-/**
- * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from
- * interrupt context (or another context that doesn't allow waiting for a
- * semaphore).
- * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT,
- * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs
- * with each loop so that mem_free can run.
- *
- * ATTENTION: As you can see from the above description, this leads to dis-/
- * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc
- * can need longer.
- *
- * If you don't want that, at least for NO_SYS=0, you can still use the following
- * functions to enqueue a deallocation call which then runs in the tcpip_thread
- * context:
- * - pbuf_free_callback(p);
- * - mem_free_callback(m);
- */
-#if !defined LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT || defined __DOXYGEN__
-#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0
-#endif
-/**
- * @}
- */
-
-/*
-   ------------------------------------------------
-   ---------- Internal Memory Pool Sizes ----------
-   ------------------------------------------------
-*/
-/**
- * @defgroup lwip_opts_memp Internal memory pools
- * @ingroup lwip_opts_infrastructure
- * @{
- */
-/**
- * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).
- * If the application sends a lot of data out of ROM (or other static memory),
- * this should be set high.
- */
-#if !defined MEMP_NUM_PBUF || defined __DOXYGEN__
-#define MEMP_NUM_PBUF                   16
-#endif
-
-/**
- * MEMP_NUM_RAW_PCB: Number of raw connection PCBs
- * (requires the LWIP_RAW option)
- */
-#if !defined MEMP_NUM_RAW_PCB || defined __DOXYGEN__
-#define MEMP_NUM_RAW_PCB                4
-#endif
-
-/**
- * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
- * per active UDP "connection".
- * (requires the LWIP_UDP option)
- */
-#if !defined MEMP_NUM_UDP_PCB || defined __DOXYGEN__
-#define MEMP_NUM_UDP_PCB                4
-#endif
-
-/**
- * MEMP_NUM_TCP_PCB: the number of simultaneously active TCP connections.
- * (requires the LWIP_TCP option)
- */
-#if !defined MEMP_NUM_TCP_PCB || defined __DOXYGEN__
-#define MEMP_NUM_TCP_PCB                5
-#endif
-
-/**
- * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
- * (requires the LWIP_TCP option)
- */
-#if !defined MEMP_NUM_TCP_PCB_LISTEN || defined __DOXYGEN__
-#define MEMP_NUM_TCP_PCB_LISTEN         8
-#endif
-
-/**
- * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.
- * (requires the LWIP_TCP option)
- */
-#if !defined MEMP_NUM_TCP_SEG || defined __DOXYGEN__
-#define MEMP_NUM_TCP_SEG                16
-#endif
-
-/**
- * MEMP_NUM_REASSDATA: the number of IP packets simultaneously queued for
- * reassembly (whole packets, not fragments!)
- */
-#if !defined MEMP_NUM_REASSDATA || defined __DOXYGEN__
-#define MEMP_NUM_REASSDATA              5
-#endif
-
-/**
- * MEMP_NUM_FRAG_PBUF: the number of IP fragments simultaneously sent
- * (fragments, not whole packets!).
- * This is only used with LWIP_NETIF_TX_SINGLE_PBUF==0 and only has to be > 1
- * with DMA-enabled MACs where the packet is not yet sent when netif->output
- * returns.
- */
-#if !defined MEMP_NUM_FRAG_PBUF || defined __DOXYGEN__
-#define MEMP_NUM_FRAG_PBUF              15
-#endif
-
-/**
- * MEMP_NUM_ARP_QUEUE: the number of simultaneously queued outgoing
- * packets (pbufs) that are waiting for an ARP request (to resolve
- * their destination address) to finish.
- * (requires the ARP_QUEUEING option)
- */
-#if !defined MEMP_NUM_ARP_QUEUE || defined __DOXYGEN__
-#define MEMP_NUM_ARP_QUEUE              30
-#endif
-
-/**
- * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces
- * can be members at the same time (one per netif - allsystems group -, plus one
- * per netif membership).
- * (requires the LWIP_IGMP option)
- */
-#if !defined MEMP_NUM_IGMP_GROUP || defined __DOXYGEN__
-#define MEMP_NUM_IGMP_GROUP             8
-#endif
-
-/**
- * MEMP_NUM_SYS_TIMEOUT: the number of simultaneously active timeouts.
- * The default number of timeouts is calculated here for all enabled modules.
- * The formula expects settings to be either '0' or '1'.
- */
-#if !defined MEMP_NUM_SYS_TIMEOUT || defined __DOXYGEN__
-#define MEMP_NUM_SYS_TIMEOUT            (LWIP_TCP + IP_REASSEMBLY + LWIP_ARP + (2*LWIP_DHCP) + LWIP_AUTOIP + LWIP_IGMP + LWIP_DNS + (PPP_SUPPORT*6*MEMP_NUM_PPP_PCB) + (LWIP_IPV6 ? (1 + LWIP_IPV6_REASS + LWIP_IPV6_MLD) : 0))
-#endif
-
-/**
- * MEMP_NUM_NETBUF: the number of struct netbufs.
- * (only needed if you use the sequential API, like api_lib.c)
- */
-#if !defined MEMP_NUM_NETBUF || defined __DOXYGEN__
-#define MEMP_NUM_NETBUF                 2
-#endif
-
-/**
- * MEMP_NUM_NETCONN: the number of struct netconns.
- * (only needed if you use the sequential API, like api_lib.c)
- */
-#if !defined MEMP_NUM_NETCONN || defined __DOXYGEN__
-#define MEMP_NUM_NETCONN                4
-#endif
-
-/**
- * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used
- * for callback/timeout API communication.
- * (only needed if you use tcpip.c)
- */
-#if !defined MEMP_NUM_TCPIP_MSG_API || defined __DOXYGEN__
-#define MEMP_NUM_TCPIP_MSG_API          8
-#endif
-
-/**
- * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used
- * for incoming packets.
- * (only needed if you use tcpip.c)
- */
-#if !defined MEMP_NUM_TCPIP_MSG_INPKT || defined __DOXYGEN__
-#define MEMP_NUM_TCPIP_MSG_INPKT        8
-#endif
-
-/**
- * MEMP_NUM_NETDB: the number of concurrently running lwip_addrinfo() calls
- * (before freeing the corresponding memory using lwip_freeaddrinfo()).
- */
-#if !defined MEMP_NUM_NETDB || defined __DOXYGEN__
-#define MEMP_NUM_NETDB                  1
-#endif
-
-/**
- * MEMP_NUM_LOCALHOSTLIST: the number of host entries in the local host list
- * if DNS_LOCAL_HOSTLIST_IS_DYNAMIC==1.
- */
-#if !defined MEMP_NUM_LOCALHOSTLIST || defined __DOXYGEN__
-#define MEMP_NUM_LOCALHOSTLIST          1
-#endif
-
-/**
- * PBUF_POOL_SIZE: the number of buffers in the pbuf pool.
- */
-#if !defined PBUF_POOL_SIZE || defined __DOXYGEN__
-#define PBUF_POOL_SIZE                  16
-#endif
-
-/** MEMP_NUM_API_MSG: the number of concurrently active calls to various
- * socket, netconn, and tcpip functions
- */
-#if !defined MEMP_NUM_API_MSG || defined __DOXYGEN__
-#define MEMP_NUM_API_MSG                MEMP_NUM_TCPIP_MSG_API
-#endif
-
-/** MEMP_NUM_DNS_API_MSG: the number of concurrently active calls to netconn_gethostbyname
- */
-#if !defined MEMP_NUM_DNS_API_MSG || defined __DOXYGEN__
-#define MEMP_NUM_DNS_API_MSG            MEMP_NUM_TCPIP_MSG_API
-#endif
-
-/** MEMP_NUM_SOCKET_SETGETSOCKOPT_DATA: the number of concurrently active calls
- * to getsockopt/setsockopt
- */
-#if !defined MEMP_NUM_SOCKET_SETGETSOCKOPT_DATA || defined __DOXYGEN__
-#define MEMP_NUM_SOCKET_SETGETSOCKOPT_DATA MEMP_NUM_TCPIP_MSG_API
-#endif
-
-/** MEMP_NUM_NETIFAPI_MSG: the number of concurrently active calls to the
- * netifapi functions
- */
-#if !defined MEMP_NUM_NETIFAPI_MSG || defined __DOXYGEN__
-#define MEMP_NUM_NETIFAPI_MSG           MEMP_NUM_TCPIP_MSG_API
-#endif
-/**
- * @}
- */
-
-/*
-   ---------------------------------
-   ---------- ARP options ----------
-   ---------------------------------
-*/
-/**
- * @defgroup lwip_opts_arp ARP
- * @ingroup lwip_opts_ipv4
- * @{
- */
-/**
- * LWIP_ARP==1: Enable ARP functionality.
- */
-#if !defined LWIP_ARP || defined __DOXYGEN__
-#define LWIP_ARP                        1
-#endif
-
-/**
- * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached.
- */
-#if !defined ARP_TABLE_SIZE || defined __DOXYGEN__
-#define ARP_TABLE_SIZE                  10
-#endif
-
-/** the time an ARP entry stays valid after its last update,
- *  for ARP_TMR_INTERVAL = 1000, this is
- *  (60 * 5) seconds = 5 minutes.
- */
-#if !defined ARP_MAXAGE || defined __DOXYGEN__
-#define ARP_MAXAGE                      300
-#endif
-
-/**
- * ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address
- * resolution. By default, only the most recent packet is queued per IP address.
- * This is sufficient for most protocols and mainly reduces TCP connection
- * startup time. Set this to 1 if you know your application sends more than one
- * packet in a row to an IP address that is not in the ARP cache.
- */
-#if !defined ARP_QUEUEING || defined __DOXYGEN__
-#define ARP_QUEUEING                    0
-#endif
-
-/** The maximum number of packets which may be queued for each
- *  unresolved address by other network layers. Defaults to 3, 0 means disabled.
- *  Old packets are dropped, new packets are queued.
- */
-#if !defined ARP_QUEUE_LEN || defined __DOXYGEN__
-#define ARP_QUEUE_LEN                   3
-#endif
-
-/**
- * ETHARP_SUPPORT_VLAN==1: support receiving and sending ethernet packets with
- * VLAN header. See the description of LWIP_HOOK_VLAN_CHECK and
- * LWIP_HOOK_VLAN_SET hooks to check/set VLAN headers.
- * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check.
- * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted.
- * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted.
- * Alternatively, define a function/define ETHARP_VLAN_CHECK_FN(eth_hdr, vlan)
- * that returns 1 to accept a packet or 0 to drop a packet.
- */
-#if !defined ETHARP_SUPPORT_VLAN || defined __DOXYGEN__
-#define ETHARP_SUPPORT_VLAN             0
-#endif
-
-/** LWIP_ETHERNET==1: enable ethernet support even though ARP might be disabled
- */
-#if !defined LWIP_ETHERNET || defined __DOXYGEN__
-#define LWIP_ETHERNET                   LWIP_ARP
-#endif
-
-/** ETH_PAD_SIZE: number of bytes added before the ethernet header to ensure
- * alignment of payload after that header. Since the header is 14 bytes long,
- * without this padding e.g. addresses in the IP header will not be aligned
- * on a 32-bit boundary, so setting this to 2 can speed up 32-bit-platforms.
- */
-#if !defined ETH_PAD_SIZE || defined __DOXYGEN__
-#define ETH_PAD_SIZE                    0
-#endif
-
-/** ETHARP_SUPPORT_STATIC_ENTRIES==1: enable code to support static ARP table
- * entries (using etharp_add_static_entry/etharp_remove_static_entry).
- */
-#if !defined ETHARP_SUPPORT_STATIC_ENTRIES || defined __DOXYGEN__
-#define ETHARP_SUPPORT_STATIC_ENTRIES   0
-#endif
-
-/** ETHARP_TABLE_MATCH_NETIF==1: Match netif for ARP table entries.
- * If disabled, duplicate IP address on multiple netifs are not supported
- * (but this should only occur for AutoIP).
- */
-#if !defined ETHARP_TABLE_MATCH_NETIF || defined __DOXYGEN__
-#define ETHARP_TABLE_MATCH_NETIF        0
-#endif
-/**
- * @}
- */
-
-/*
-   --------------------------------
-   ---------- IP options ----------
-   --------------------------------
-*/
-/**
- * @defgroup lwip_opts_ipv4 IPv4
- * @ingroup lwip_opts
- * @{
- */
-/**
- * LWIP_IPV4==1: Enable IPv4
- */
-#if !defined LWIP_IPV4 || defined __DOXYGEN__
-#define LWIP_IPV4                       1
-#endif
-
-/**
- * IP_FORWARD==1: Enables the ability to forward IP packets across network
- * interfaces. If you are going to run lwIP on a device with only one network
- * interface, define this to 0.
- */
-#if !defined IP_FORWARD || defined __DOXYGEN__
-#define IP_FORWARD                      0
-#endif
-
-/**
- * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that
- * this option does not affect outgoing packet sizes, which can be controlled
- * via IP_FRAG.
- */
-#if !defined IP_REASSEMBLY || defined __DOXYGEN__
-#define IP_REASSEMBLY                   1
-#endif
-
-/**
- * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note
- * that this option does not affect incoming packet sizes, which can be
- * controlled via IP_REASSEMBLY.
- */
-#if !defined IP_FRAG || defined __DOXYGEN__
-#define IP_FRAG                         1
-#endif
-
-#if !LWIP_IPV4
-/* disable IPv4 extensions when IPv4 is disabled */
-#undef IP_FORWARD
-#define IP_FORWARD                      0
-#undef IP_REASSEMBLY
-#define IP_REASSEMBLY                   0
-#undef IP_FRAG
-#define IP_FRAG                         0
-#endif /* !LWIP_IPV4 */
-
-/**
- * IP_OPTIONS_ALLOWED: Defines the behavior for IP options.
- *      IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped.
- *      IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed).
- */
-#if !defined IP_OPTIONS_ALLOWED || defined __DOXYGEN__
-#define IP_OPTIONS_ALLOWED              1
-#endif
-
-/**
- * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
- * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
- * in this time, the whole packet is discarded.
- */
-#if !defined IP_REASS_MAXAGE || defined __DOXYGEN__
-#define IP_REASS_MAXAGE                 3
-#endif
-
-/**
- * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
- * Since the received pbufs are enqueued, be sure to configure
- * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
- * packets even if the maximum amount of fragments is enqueued for reassembly!
- */
-#if !defined IP_REASS_MAX_PBUFS || defined __DOXYGEN__
-#define IP_REASS_MAX_PBUFS              10
-#endif
-
-/**
- * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers.
- */
-#if !defined IP_DEFAULT_TTL || defined __DOXYGEN__
-#define IP_DEFAULT_TTL                  255
-#endif
-
-/**
- * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast
- * filter per pcb on udp and raw send operations. To enable broadcast filter
- * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1.
- */
-#if !defined IP_SOF_BROADCAST || defined __DOXYGEN__
-#define IP_SOF_BROADCAST                0
-#endif
-
-/**
- * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast
- * filter on recv operations.
- */
-#if !defined IP_SOF_BROADCAST_RECV || defined __DOXYGEN__
-#define IP_SOF_BROADCAST_RECV           0
-#endif
-
-/**
- * IP_FORWARD_ALLOW_TX_ON_RX_NETIF==1: allow ip_forward() to send packets back
- * out on the netif where it was received. This should only be used for
- * wireless networks.
- * ATTENTION: When this is 1, make sure your netif driver correctly marks incoming
- * link-layer-broadcast/multicast packets as such using the corresponding pbuf flags!
- */
-#if !defined IP_FORWARD_ALLOW_TX_ON_RX_NETIF || defined __DOXYGEN__
-#define IP_FORWARD_ALLOW_TX_ON_RX_NETIF 0
-#endif
-
-/**
- * LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS==1: randomize the local port for the first
- * local TCP/UDP pcb (default==0). This can prevent creating predictable port
- * numbers after booting a device.
- */
-#if !defined LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS || defined __DOXYGEN__
-#define LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS 0
-#endif
-/**
- * @}
- */
-
-/*
-   ----------------------------------
-   ---------- ICMP options ----------
-   ----------------------------------
-*/
-/**
- * @defgroup lwip_opts_icmp ICMP
- * @ingroup lwip_opts_ipv4
- * @{
- */
-/**
- * LWIP_ICMP==1: Enable ICMP module inside the IP stack.
- * Be careful, disable that make your product non-compliant to RFC1122
- */
-#if !defined LWIP_ICMP || defined __DOXYGEN__
-#define LWIP_ICMP                       1
-#endif
-
-/**
- * ICMP_TTL: Default value for Time-To-Live used by ICMP packets.
- */
-#if !defined ICMP_TTL || defined __DOXYGEN__
-#define ICMP_TTL                       (IP_DEFAULT_TTL)
-#endif
-
-/**
- * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only)
- */
-#if !defined LWIP_BROADCAST_PING || defined __DOXYGEN__
-#define LWIP_BROADCAST_PING             0
-#endif
-
-/**
- * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only)
- */
-#if !defined LWIP_MULTICAST_PING || defined __DOXYGEN__
-#define LWIP_MULTICAST_PING             0
-#endif
-/**
- * @}
- */
-
-/*
-   ---------------------------------
-   ---------- RAW options ----------
-   ---------------------------------
-*/
-/**
- * @defgroup lwip_opts_raw RAW
- * @ingroup lwip_opts_callback
- * @{
- */
-/**
- * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
- */
-#if !defined LWIP_RAW || defined __DOXYGEN__
-#define LWIP_RAW                        0
-#endif
-
-/**
- * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
- */
-#if !defined RAW_TTL || defined __DOXYGEN__
-#define RAW_TTL                        (IP_DEFAULT_TTL)
-#endif
-/**
- * @}
- */
-
-/*
-   ----------------------------------
-   ---------- DHCP options ----------
-   ----------------------------------
-*/
-/**
- * @defgroup lwip_opts_dhcp DHCP
- * @ingroup lwip_opts_ipv4
- * @{
- */
-/**
- * LWIP_DHCP==1: Enable DHCP module.
- */
-#if !defined LWIP_DHCP || defined __DOXYGEN__
-#define LWIP_DHCP                       0
-#endif
-#if !LWIP_IPV4
-/* disable DHCP when IPv4 is disabled */
-#undef LWIP_DHCP
-#define LWIP_DHCP                       0
-#endif /* !LWIP_IPV4 */
-
-/**
- * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address.
- */
-#if !defined DHCP_DOES_ARP_CHECK || defined __DOXYGEN__
-#define DHCP_DOES_ARP_CHECK             ((LWIP_DHCP) && (LWIP_ARP))
-#endif
-
-/**
- * LWIP_DHCP_CHECK_LINK_UP==1: dhcp_start() only really starts if the netif has
- * NETIF_FLAG_LINK_UP set in its flags. As this is only an optimization and
- * netif drivers might not set this flag, the default is off. If enabled,
- * netif_set_link_up() must be called to continue dhcp starting.
- */
-#if !defined LWIP_DHCP_CHECK_LINK_UP
-#define LWIP_DHCP_CHECK_LINK_UP         0
-#endif
-
-/**
- * LWIP_DHCP_BOOTP_FILE==1: Store offered_si_addr and boot_file_name.
- */
-#if !defined LWIP_DHCP_BOOTP_FILE || defined __DOXYGEN__
-#define LWIP_DHCP_BOOTP_FILE            0
-#endif
-
-/**
- * LWIP_DHCP_GETS_NTP==1: Request NTP servers with discover/select. For each
- * response packet, an callback is called, which has to be provided by the port:
- * void dhcp_set_ntp_servers(u8_t num_ntp_servers, ip_addr_t* ntp_server_addrs);
-*/
-#if !defined LWIP_DHCP_GET_NTP_SRV || defined __DOXYGEN__
-#define LWIP_DHCP_GET_NTP_SRV           0
-#endif
-
-/**
- * The maximum of NTP servers requested
- */
-#if !defined LWIP_DHCP_MAX_NTP_SERVERS || defined __DOXYGEN__
-#define LWIP_DHCP_MAX_NTP_SERVERS       1
-#endif
-
-/**
- * LWIP_DHCP_MAX_DNS_SERVERS > 0: Request DNS servers with discover/select.
- * DHCP servers received in the response are passed to DNS via @ref dns_setserver()
- * (up to the maximum limit defined here).
- */
-#if !defined LWIP_DHCP_MAX_DNS_SERVERS || defined __DOXYGEN__
-#define LWIP_DHCP_MAX_DNS_SERVERS       DNS_MAX_SERVERS
-#endif
-/**
- * @}
- */
-
-/*
-   ------------------------------------
-   ---------- AUTOIP options ----------
-   ------------------------------------
-*/
-/**
- * @defgroup lwip_opts_autoip AUTOIP
- * @ingroup lwip_opts_ipv4
- * @{
- */
-/**
- * LWIP_AUTOIP==1: Enable AUTOIP module.
- */
-#if !defined LWIP_AUTOIP || defined __DOXYGEN__
-#define LWIP_AUTOIP                     0
-#endif
-#if !LWIP_IPV4
-/* disable AUTOIP when IPv4 is disabled */
-#undef LWIP_AUTOIP
-#define LWIP_AUTOIP                     0
-#endif /* !LWIP_IPV4 */
-
-/**
- * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
- * the same interface at the same time.
- */
-#if !defined LWIP_DHCP_AUTOIP_COOP || defined __DOXYGEN__
-#define LWIP_DHCP_AUTOIP_COOP           0
-#endif
-
-/**
- * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
- * that should be sent before falling back on AUTOIP (the DHCP client keeps
- * running in this case). This can be set as low as 1 to get an AutoIP address
- * very  quickly, but you should be prepared to handle a changing IP address
- * when DHCP overrides AutoIP.
- */
-#if !defined LWIP_DHCP_AUTOIP_COOP_TRIES || defined __DOXYGEN__
-#define LWIP_DHCP_AUTOIP_COOP_TRIES     9
-#endif
-/**
- * @}
- */
-
-/*
-   ----------------------------------
-   ----- SNMP MIB2 support      -----
-   ----------------------------------
-*/
-/**
- * @defgroup lwip_opts_mib2 SNMP MIB2 callbacks
- * @ingroup lwip_opts_infrastructure
- * @{
- */
-/**
- * LWIP_MIB2_CALLBACKS==1: Turn on SNMP MIB2 callbacks.
- * Turn this on to get callbacks needed to implement MIB2.
- * Usually MIB2_STATS should be enabled, too.
- */
-#if !defined LWIP_MIB2_CALLBACKS || defined __DOXYGEN__
-#define LWIP_MIB2_CALLBACKS             0
-#endif
-/**
- * @}
- */
-
-/*
-   ----------------------------------
-   ----- Multicast/IGMP options -----
-   ----------------------------------
-*/
-/**
- * @defgroup lwip_opts_igmp IGMP
- * @ingroup lwip_opts_ipv4
- * @{
- */
-/**
- * LWIP_IGMP==1: Turn on IGMP module.
- */
-#if !defined LWIP_IGMP || defined __DOXYGEN__
-#define LWIP_IGMP                       0
-#endif
-#if !LWIP_IPV4
-#undef LWIP_IGMP
-#define LWIP_IGMP                       0
-#endif
-
-/**
- * LWIP_MULTICAST_TX_OPTIONS==1: Enable multicast TX support like the socket options
- * IP_MULTICAST_TTL/IP_MULTICAST_IF/IP_MULTICAST_LOOP
- */
-#if !defined LWIP_MULTICAST_TX_OPTIONS || defined __DOXYGEN__
-#define LWIP_MULTICAST_TX_OPTIONS       (LWIP_IGMP && LWIP_UDP)
-#endif
-/**
- * @}
- */
-
-/*
-   ----------------------------------
-   ---------- DNS options -----------
-   ----------------------------------
-*/
-/**
- * @defgroup lwip_opts_dns DNS
- * @ingroup lwip_opts_callback
- * @{
- */
-/**
- * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS
- * transport.
- */
-#if !defined LWIP_DNS || defined __DOXYGEN__
-#define LWIP_DNS                        0
-#endif
-
-/** DNS maximum number of entries to maintain locally. */
-#if !defined DNS_TABLE_SIZE || defined __DOXYGEN__
-#define DNS_TABLE_SIZE                  4
-#endif
-
-/** DNS maximum host name length supported in the name table. */
-#if !defined DNS_MAX_NAME_LENGTH || defined __DOXYGEN__
-#define DNS_MAX_NAME_LENGTH             256
-#endif
-
-/** The maximum of DNS servers
- * The first server can be initialized automatically by defining
- * DNS_SERVER_ADDRESS(ipaddr), where 'ipaddr' is an 'ip_addr_t*'
- */
-#if !defined DNS_MAX_SERVERS || defined __DOXYGEN__
-#define DNS_MAX_SERVERS                 2
-#endif
-
-/** DNS do a name checking between the query and the response. */
-#if !defined DNS_DOES_NAME_CHECK || defined __DOXYGEN__
-#define DNS_DOES_NAME_CHECK             1
-#endif
-
-/** LWIP_DNS_SECURE: controls the security level of the DNS implementation
- * Use all DNS security features by default.
- * This is overridable but should only be needed by very small targets
- * or when using against non standard DNS servers. */
-#if !defined LWIP_DNS_SECURE || defined __DOXYGEN__
-#define LWIP_DNS_SECURE (LWIP_DNS_SECURE_RAND_XID | LWIP_DNS_SECURE_NO_MULTIPLE_OUTSTANDING | LWIP_DNS_SECURE_RAND_SRC_PORT)
-#endif
-
-/* A list of DNS security features follows */
-#define LWIP_DNS_SECURE_RAND_XID                1
-#define LWIP_DNS_SECURE_NO_MULTIPLE_OUTSTANDING 2
-#define LWIP_DNS_SECURE_RAND_SRC_PORT           4
-
-/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled, you have to define an initializer:
- *  \#define DNS_LOCAL_HOSTLIST_INIT {DNS_LOCAL_HOSTLIST_ELEM("host_ip4", IPADDR4_INIT_BYTES(1,2,3,4)), \
- *                                    DNS_LOCAL_HOSTLIST_ELEM("host_ip6", IPADDR6_INIT_HOST(123, 234, 345, 456)}
- *
- *  Instead, you can also use an external function:
- *  \#define DNS_LOOKUP_LOCAL_EXTERN(x) extern err_t my_lookup_function(const char *name, ip_addr_t *addr, u8_t dns_addrtype)
- *  that looks up the IP address and returns ERR_OK if found (LWIP_DNS_ADDRTYPE_xxx is passed in dns_addrtype).
- */
-#if !defined DNS_LOCAL_HOSTLIST || defined __DOXYGEN__
-#define DNS_LOCAL_HOSTLIST              0
-#endif /* DNS_LOCAL_HOSTLIST */
-
-/** If this is turned on, the local host-list can be dynamically changed
- *  at runtime. */
-#if !defined DNS_LOCAL_HOSTLIST_IS_DYNAMIC || defined __DOXYGEN__
-#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC   0
-#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */
-
-/** Set this to 1 to enable querying ".local" names via mDNS
- *  using a One-Shot Multicast DNS Query */
-#if !defined LWIP_DNS_SUPPORT_MDNS_QUERIES || defined __DOXYGEN__
-#define LWIP_DNS_SUPPORT_MDNS_QUERIES  0
-#endif
-/**
- * @}
- */
-
-/*
-   ---------------------------------
-   ---------- UDP options ----------
-   ---------------------------------
-*/
-/**
- * @defgroup lwip_opts_udp UDP
- * @ingroup lwip_opts_callback
- * @{
- */
-/**
- * LWIP_UDP==1: Turn on UDP.
- */
-#if !defined LWIP_UDP || defined __DOXYGEN__
-#define LWIP_UDP                        1
-#endif
-
-/**
- * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP)
- */
-#if !defined LWIP_UDPLITE || defined __DOXYGEN__
-#define LWIP_UDPLITE                    0
-#endif
-
-/**
- * UDP_TTL: Default Time-To-Live value.
- */
-#if !defined UDP_TTL || defined __DOXYGEN__
-#define UDP_TTL                         (IP_DEFAULT_TTL)
-#endif
-
-/**
- * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf.
- */
-#if !defined LWIP_NETBUF_RECVINFO || defined __DOXYGEN__
-#define LWIP_NETBUF_RECVINFO            0
-#endif
-/**
- * @}
- */
-
-/*
-   ---------------------------------
-   ---------- TCP options ----------
-   ---------------------------------
-*/
-/**
- * @defgroup lwip_opts_tcp TCP
- * @ingroup lwip_opts_callback
- * @{
- */
-/**
- * LWIP_TCP==1: Turn on TCP.
- */
-#if !defined LWIP_TCP || defined __DOXYGEN__
-#define LWIP_TCP                        1
-#endif
-
-/**
- * TCP_TTL: Default Time-To-Live value.
- */
-#if !defined TCP_TTL || defined __DOXYGEN__
-#define TCP_TTL                         (IP_DEFAULT_TTL)
-#endif
-
-/**
- * TCP_WND: The size of a TCP window.  This must be at least
- * (2 * TCP_MSS) for things to work well.
- * ATTENTION: when using TCP_RCV_SCALE, TCP_WND is the total size
- * with scaling applied. Maximum window value in the TCP header
- * will be TCP_WND >> TCP_RCV_SCALE
- */
-#if !defined TCP_WND || defined __DOXYGEN__
-#define TCP_WND                         (4 * TCP_MSS)
-#endif
-
-/**
- * TCP_MAXRTX: Maximum number of retransmissions of data segments.
- */
-#if !defined TCP_MAXRTX || defined __DOXYGEN__
-#define TCP_MAXRTX                      12
-#endif
-
-/**
- * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
- */
-#if !defined TCP_SYNMAXRTX || defined __DOXYGEN__
-#define TCP_SYNMAXRTX                   6
-#endif
-
-/**
- * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.
- * Define to 0 if your device is low on memory.
- */
-#if !defined TCP_QUEUE_OOSEQ || defined __DOXYGEN__
-#define TCP_QUEUE_OOSEQ                 (LWIP_TCP)
-#endif
-
-/**
- * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default,
- * you might want to increase this.)
- * For the receive side, this MSS is advertised to the remote side
- * when opening a connection. For the transmit size, this MSS sets
- * an upper limit on the MSS advertised by the remote host.
- */
-#if !defined TCP_MSS || defined __DOXYGEN__
-#define TCP_MSS                         536
-#endif
-
-/**
- * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really
- * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which
- * reflects the available reassembly buffer size at the remote host) and the
- * largest size permitted by the IP layer" (RFC 1122)
- * Setting this to 1 enables code that checks TCP_MSS against the MTU of the
- * netif used for a connection and limits the MSS if it would be too big otherwise.
- */
-#if !defined TCP_CALCULATE_EFF_SEND_MSS || defined __DOXYGEN__
-#define TCP_CALCULATE_EFF_SEND_MSS      1
-#endif
-
-/**
- * TCP_SND_BUF: TCP sender buffer space (bytes).
- * To achieve good performance, this should be at least 2 * TCP_MSS.
- */
-#if !defined TCP_SND_BUF || defined __DOXYGEN__
-#define TCP_SND_BUF                     (2 * TCP_MSS)
-#endif
-
-/**
- * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
- * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work.
- */
-#if !defined TCP_SND_QUEUELEN || defined __DOXYGEN__
-#define TCP_SND_QUEUELEN                ((4 * (TCP_SND_BUF) + (TCP_MSS - 1))/(TCP_MSS))
-#endif
-
-/**
- * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than
- * TCP_SND_BUF. It is the amount of space which must be available in the
- * TCP snd_buf for select to return writable (combined with TCP_SNDQUEUELOWAT).
- */
-#if !defined TCP_SNDLOWAT || defined __DOXYGEN__
-#define TCP_SNDLOWAT                    LWIP_MIN(LWIP_MAX(((TCP_SND_BUF)/2), (2 * TCP_MSS) + 1), (TCP_SND_BUF) - 1)
-#endif
-
-/**
- * TCP_SNDQUEUELOWAT: TCP writable bufs (pbuf count). This must be less
- * than TCP_SND_QUEUELEN. If the number of pbufs queued on a pcb drops below
- * this number, select returns writable (combined with TCP_SNDLOWAT).
- */
-#if !defined TCP_SNDQUEUELOWAT || defined __DOXYGEN__
-#define TCP_SNDQUEUELOWAT               LWIP_MAX(((TCP_SND_QUEUELEN)/2), 5)
-#endif
-
-/**
- * TCP_OOSEQ_MAX_BYTES: The maximum number of bytes queued on ooseq per pcb.
- * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==1.
- */
-#if !defined TCP_OOSEQ_MAX_BYTES || defined __DOXYGEN__
-#define TCP_OOSEQ_MAX_BYTES             0
-#endif
-
-/**
- * TCP_OOSEQ_MAX_PBUFS: The maximum number of pbufs queued on ooseq per pcb.
- * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==1.
- */
-#if !defined TCP_OOSEQ_MAX_PBUFS || defined __DOXYGEN__
-#define TCP_OOSEQ_MAX_PBUFS             0
-#endif
-
-/**
- * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.
- */
-#if !defined TCP_LISTEN_BACKLOG || defined __DOXYGEN__
-#define TCP_LISTEN_BACKLOG              0
-#endif
-
-/**
- * The maximum allowed backlog for TCP listen netconns.
- * This backlog is used unless another is explicitly specified.
- * 0xff is the maximum (u8_t).
- */
-#if !defined TCP_DEFAULT_LISTEN_BACKLOG || defined __DOXYGEN__
-#define TCP_DEFAULT_LISTEN_BACKLOG      0xff
-#endif
-
-/**
- * TCP_OVERSIZE: The maximum number of bytes that tcp_write may
- * allocate ahead of time in an attempt to create shorter pbuf chains
- * for transmission. The meaningful range is 0 to TCP_MSS. Some
- * suggested values are:
- *
- * 0:         Disable oversized allocation. Each tcp_write() allocates a new
-              pbuf (old behaviour).
- * 1:         Allocate size-aligned pbufs with minimal excess. Use this if your
- *            scatter-gather DMA requires aligned fragments.
- * 128:       Limit the pbuf/memory overhead to 20%.
- * TCP_MSS:   Try to create unfragmented TCP packets.
- * TCP_MSS/4: Try to create 4 fragments or less per TCP packet.
- */
-#if !defined TCP_OVERSIZE || defined __DOXYGEN__
-#define TCP_OVERSIZE                    TCP_MSS
-#endif
-
-/**
- * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option.
- * The timestamp option is currently only used to help remote hosts, it is not
- * really used locally. Therefore, it is only enabled when a TS option is
- * received in the initial SYN packet from a remote host.
- */
-#if !defined LWIP_TCP_TIMESTAMPS || defined __DOXYGEN__
-#define LWIP_TCP_TIMESTAMPS             0
-#endif
-
-/**
- * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an
- * explicit window update
- */
-#if !defined TCP_WND_UPDATE_THRESHOLD || defined __DOXYGEN__
-#define TCP_WND_UPDATE_THRESHOLD   LWIP_MIN((TCP_WND / 4), (TCP_MSS * 4))
-#endif
-
-/**
- * LWIP_EVENT_API and LWIP_CALLBACK_API: Only one of these should be set to 1.
- *     LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all
- *         events (accept, sent, etc) that happen in the system.
- *     LWIP_CALLBACK_API==1: The PCB callback function is called directly
- *         for the event. This is the default.
- */
-#if !defined(LWIP_EVENT_API) && !defined(LWIP_CALLBACK_API) || defined __DOXYGEN__
-#define LWIP_EVENT_API                  0
-#define LWIP_CALLBACK_API               1
-#else
-#ifndef LWIP_EVENT_API
-#define LWIP_EVENT_API                  0
-#endif
-#ifndef LWIP_CALLBACK_API
-#define LWIP_CALLBACK_API               0
-#endif
-#endif
-
-/**
- * LWIP_WND_SCALE and TCP_RCV_SCALE:
- * Set LWIP_WND_SCALE to 1 to enable window scaling.
- * Set TCP_RCV_SCALE to the desired scaling factor (shift count in the
- * range of [0..14]).
- * When LWIP_WND_SCALE is enabled but TCP_RCV_SCALE is 0, we can use a large
- * send window while having a small receive window only.
- */
-#if !defined LWIP_WND_SCALE || defined __DOXYGEN__
-#define LWIP_WND_SCALE                  0
-#define TCP_RCV_SCALE                   0
-#endif
-/**
- * @}
- */
-
-/*
-   ----------------------------------
-   ---------- Pbuf options ----------
-   ----------------------------------
-*/
-/**
- * @defgroup lwip_opts_pbuf PBUF
- * @ingroup lwip_opts
- * @{
- */
-/**
- * PBUF_LINK_HLEN: the number of bytes that should be allocated for a
- * link level header. The default is 14, the standard value for
- * Ethernet.
- */
-#if !defined PBUF_LINK_HLEN || defined __DOXYGEN__
-#if defined LWIP_HOOK_VLAN_SET && !defined __DOXYGEN__
-#define PBUF_LINK_HLEN                  (18 + ETH_PAD_SIZE)
-#else /* LWIP_HOOK_VLAN_SET */
-#define PBUF_LINK_HLEN                  (14 + ETH_PAD_SIZE)
-#endif /* LWIP_HOOK_VLAN_SET */
-#endif
-
-/**
- * PBUF_LINK_ENCAPSULATION_HLEN: the number of bytes that should be allocated
- * for an additional encapsulation header before ethernet headers (e.g. 802.11)
- */
-#if !defined PBUF_LINK_ENCAPSULATION_HLEN || defined __DOXYGEN__
-#define PBUF_LINK_ENCAPSULATION_HLEN    0u
-#endif
-
-/**
- * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is
- * designed to accommodate single full size TCP frame in one pbuf, including
- * TCP_MSS, IP header, and link header.
- */
-#if !defined PBUF_POOL_BUFSIZE || defined __DOXYGEN__
-#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_ENCAPSULATION_HLEN+PBUF_LINK_HLEN)
-#endif
-/**
- * @}
- */
-
-/*
-   ------------------------------------------------
-   ---------- Network Interfaces options ----------
-   ------------------------------------------------
-*/
-/**
- * @defgroup lwip_opts_netif NETIF
- * @ingroup lwip_opts
- * @{
- */
-/**
- * LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname
- * field.
- */
-#if !defined LWIP_NETIF_HOSTNAME || defined __DOXYGEN__
-#define LWIP_NETIF_HOSTNAME             0
-#endif
-
-/**
- * LWIP_NETIF_API==1: Support netif api (in netifapi.c)
- */
-#if !defined LWIP_NETIF_API || defined __DOXYGEN__
-#define LWIP_NETIF_API                  0
-#endif
-
-/**
- * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface
- * changes its up/down status (i.e., due to DHCP IP acquisition)
- */
-#if !defined LWIP_NETIF_STATUS_CALLBACK || defined __DOXYGEN__
-#define LWIP_NETIF_STATUS_CALLBACK      0
-#endif
-
-/**
- * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
- * whenever the link changes (i.e., link down)
- */
-#if !defined LWIP_NETIF_LINK_CALLBACK || defined __DOXYGEN__
-#define LWIP_NETIF_LINK_CALLBACK        0
-#endif
-
-/**
- * LWIP_NETIF_REMOVE_CALLBACK==1: Support a callback function that is called
- * when a netif has been removed
- */
-#if !defined LWIP_NETIF_REMOVE_CALLBACK || defined __DOXYGEN__
-#define LWIP_NETIF_REMOVE_CALLBACK      0
-#endif
-
-/**
- * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table
- * indices) in struct netif. TCP and UDP can make use of this to prevent
- * scanning the ARP table for every sent packet. While this is faster for big
- * ARP tables or many concurrent connections, it might be counterproductive
- * if you have a tiny ARP table or if there never are concurrent connections.
- */
-#if !defined LWIP_NETIF_HWADDRHINT || defined __DOXYGEN__
-#define LWIP_NETIF_HWADDRHINT           0
-#endif
-
-/**
- * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data
- * to be sent into one single pbuf. This is for compatibility with DMA-enabled
- * MACs that do not support scatter-gather.
- * Beware that this might involve CPU-memcpy before transmitting that would not
- * be needed without this flag! Use this only if you need to!
- *
- * @todo: TCP and IP-frag do not work with this, yet:
- */
-#if !defined LWIP_NETIF_TX_SINGLE_PBUF || defined __DOXYGEN__
-#define LWIP_NETIF_TX_SINGLE_PBUF             0
-#endif /* LWIP_NETIF_TX_SINGLE_PBUF */
-
-/**
- * LWIP_NUM_NETIF_CLIENT_DATA: Number of clients that may store
- * data in client_data member array of struct netif.
- */
-#if !defined LWIP_NUM_NETIF_CLIENT_DATA || defined __DOXYGEN__
-#define LWIP_NUM_NETIF_CLIENT_DATA            0
-#endif
-/**
- * @}
- */
-
-/*
-   ------------------------------------
-   ---------- LOOPIF options ----------
-   ------------------------------------
-*/
-/**
- * @defgroup lwip_opts_loop Loopback interface
- * @ingroup lwip_opts_netif
- * @{
- */
-/**
- * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1).
- * This is only needed when no real netifs are available. If at least one other
- * netif is available, loopback traffic uses this netif.
- */
-#if !defined LWIP_HAVE_LOOPIF || defined __DOXYGEN__
-#define LWIP_HAVE_LOOPIF                LWIP_NETIF_LOOPBACK
-#endif
-
-/**
- * LWIP_LOOPIF_MULTICAST==1: Support multicast/IGMP on loop interface (127.0.0.1).
- */
-#if !defined LWIP_LOOPIF_MULTICAST || defined __DOXYGEN__
-#define LWIP_LOOPIF_MULTICAST               0
-#endif
-
-/**
- * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
- * address equal to the netif IP address, looping them back up the stack.
- */
-#if !defined LWIP_NETIF_LOOPBACK || defined __DOXYGEN__
-#define LWIP_NETIF_LOOPBACK             0
-#endif
-
-/**
- * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
- * sending for each netif (0 = disabled)
- */
-#if !defined LWIP_LOOPBACK_MAX_PBUFS || defined __DOXYGEN__
-#define LWIP_LOOPBACK_MAX_PBUFS         0
-#endif
-
-/**
- * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in
- * the system, as netifs must change how they behave depending on this setting
- * for the LWIP_NETIF_LOOPBACK option to work.
- * Setting this is needed to avoid reentering non-reentrant functions like
- * tcp_input().
- *    LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a
- *       multithreaded environment like tcpip.c. In this case, netif->input()
- *       is called directly.
- *    LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup.
- *       The packets are put on a list and netif_poll() must be called in
- *       the main application loop.
- */
-#if !defined LWIP_NETIF_LOOPBACK_MULTITHREADING || defined __DOXYGEN__
-#define LWIP_NETIF_LOOPBACK_MULTITHREADING    (!NO_SYS)
-#endif
-/**
- * @}
- */
-
-/*
-   ------------------------------------
-   ---------- Thread options ----------
-   ------------------------------------
-*/
-/**
- * @defgroup lwip_opts_thread Threading
- * @ingroup lwip_opts_infrastructure
- * @{
- */
-/**
- * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
- */
-#if !defined TCPIP_THREAD_NAME || defined __DOXYGEN__
-#define TCPIP_THREAD_NAME              "tcpip_thread"
-#endif
-
-/**
- * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
- * The stack size value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#if !defined TCPIP_THREAD_STACKSIZE || defined __DOXYGEN__
-#define TCPIP_THREAD_STACKSIZE          0
-#endif
-
-/**
- * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.
- * The priority value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#if !defined TCPIP_THREAD_PRIO || defined __DOXYGEN__
-#define TCPIP_THREAD_PRIO               1
-#endif
-
-/**
- * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages
- * The queue size value itself is platform-dependent, but is passed to
- * sys_mbox_new() when tcpip_init is called.
- */
-#if !defined TCPIP_MBOX_SIZE || defined __DOXYGEN__
-#define TCPIP_MBOX_SIZE                 0
-#endif
-
-/**
- * Define this to something that triggers a watchdog. This is called from
- * tcpip_thread after processing a message.
- */
-#if !defined LWIP_TCPIP_THREAD_ALIVE || defined __DOXYGEN__
-#define LWIP_TCPIP_THREAD_ALIVE()
-#endif
-
-/**
- * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread.
- */
-#if !defined SLIPIF_THREAD_NAME || defined __DOXYGEN__
-#define SLIPIF_THREAD_NAME             "slipif_loop"
-#endif
-
-/**
- * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread.
- * The stack size value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#if !defined SLIPIF_THREAD_STACKSIZE || defined __DOXYGEN__
-#define SLIPIF_THREAD_STACKSIZE         0
-#endif
-
-/**
- * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread.
- * The priority value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#if !defined SLIPIF_THREAD_PRIO || defined __DOXYGEN__
-#define SLIPIF_THREAD_PRIO              1
-#endif
-
-/**
- * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread.
- */
-#if !defined DEFAULT_THREAD_NAME || defined __DOXYGEN__
-#define DEFAULT_THREAD_NAME            "lwIP"
-#endif
-
-/**
- * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
- * The stack size value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#if !defined DEFAULT_THREAD_STACKSIZE || defined __DOXYGEN__
-#define DEFAULT_THREAD_STACKSIZE        0
-#endif
-
-/**
- * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
- * The priority value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#if !defined DEFAULT_THREAD_PRIO || defined __DOXYGEN__
-#define DEFAULT_THREAD_PRIO             1
-#endif
-
-/**
- * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
- * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed
- * to sys_mbox_new() when the recvmbox is created.
- */
-#if !defined DEFAULT_RAW_RECVMBOX_SIZE || defined __DOXYGEN__
-#define DEFAULT_RAW_RECVMBOX_SIZE       0
-#endif
-
-/**
- * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
- * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed
- * to sys_mbox_new() when the recvmbox is created.
- */
-#if !defined DEFAULT_UDP_RECVMBOX_SIZE || defined __DOXYGEN__
-#define DEFAULT_UDP_RECVMBOX_SIZE       0
-#endif
-
-/**
- * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
- * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed
- * to sys_mbox_new() when the recvmbox is created.
- */
-#if !defined DEFAULT_TCP_RECVMBOX_SIZE || defined __DOXYGEN__
-#define DEFAULT_TCP_RECVMBOX_SIZE       0
-#endif
-
-/**
- * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
- * The queue size value itself is platform-dependent, but is passed to
- * sys_mbox_new() when the acceptmbox is created.
- */
-#if !defined DEFAULT_ACCEPTMBOX_SIZE || defined __DOXYGEN__
-#define DEFAULT_ACCEPTMBOX_SIZE         0
-#endif
-/**
- * @}
- */
-
-/*
-   ----------------------------------------------
-   ---------- Sequential layer options ----------
-   ----------------------------------------------
-*/
-/**
- * @defgroup lwip_opts_netconn Netconn
- * @ingroup lwip_opts_threadsafe_apis
- * @{
- */
-/**
- * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
- */
-#if !defined LWIP_NETCONN || defined __DOXYGEN__
-#define LWIP_NETCONN                    1
-#endif
-
-/** LWIP_TCPIP_TIMEOUT==1: Enable tcpip_timeout/tcpip_untimeout to create
- * timers running in tcpip_thread from another thread.
- */
-#if !defined LWIP_TCPIP_TIMEOUT || defined __DOXYGEN__
-#define LWIP_TCPIP_TIMEOUT              0
-#endif
-
-/** LWIP_NETCONN_SEM_PER_THREAD==1: Use one (thread-local) semaphore per
- * thread calling socket/netconn functions instead of allocating one
- * semaphore per netconn (and per select etc.)
- * ATTENTION: a thread-local semaphore for API calls is needed:
- * - LWIP_NETCONN_THREAD_SEM_GET() returning a sys_sem_t*
- * - LWIP_NETCONN_THREAD_SEM_ALLOC() creating the semaphore
- * - LWIP_NETCONN_THREAD_SEM_FREE() freeing the semaphore
- * The latter 2 can be invoked up by calling netconn_thread_init()/netconn_thread_cleanup().
- * Ports may call these for threads created with sys_thread_new().
- */
-#if !defined LWIP_NETCONN_SEM_PER_THREAD || defined __DOXYGEN__
-#define LWIP_NETCONN_SEM_PER_THREAD     0
-#endif
-
-/** LWIP_NETCONN_FULLDUPLEX==1: Enable code that allows reading from one thread,
- * writing from a 2nd thread and closing from a 3rd thread at the same time.
- * ATTENTION: This is currently really alpha! Some requirements:
- * - LWIP_NETCONN_SEM_PER_THREAD==1 is required to use one socket/netconn from
- *   multiple threads at once
- * - sys_mbox_free() has to unblock receive tasks waiting on recvmbox/acceptmbox
- *   and prevent a task pending on this during/after deletion
- */
-#if !defined LWIP_NETCONN_FULLDUPLEX || defined __DOXYGEN__
-#define LWIP_NETCONN_FULLDUPLEX         0
-#endif
-/**
- * @}
- */
-
-/*
-   ------------------------------------
-   ---------- Socket options ----------
-   ------------------------------------
-*/
-/**
- * @defgroup lwip_opts_socket Sockets
- * @ingroup lwip_opts_threadsafe_apis
- * @{
- */
-/**
- * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
- */
-#if !defined LWIP_SOCKET || defined __DOXYGEN__
-#define LWIP_SOCKET                     1
-#endif
-
-/* LWIP_SOCKET_SET_ERRNO==1: Set errno when socket functions cannot complete
- * successfully, as required by POSIX. Default is POSIX-compliant.
- */
-#if !defined LWIP_SOCKET_SET_ERRNO || defined __DOXYGEN__
-#define LWIP_SOCKET_SET_ERRNO           1
-#endif
-
-/**
- * LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names through defines.
- * LWIP_COMPAT_SOCKETS==2: Same as ==1 but correctly named functions are created.
- * While this helps code completion, it might conflict with existing libraries.
- * (only used if you use sockets.c)
- */
-#if !defined LWIP_COMPAT_SOCKETS || defined __DOXYGEN__
-#define LWIP_COMPAT_SOCKETS             1
-#endif
-
-/**
- * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names.
- * Disable this option if you use a POSIX operating system that uses the same
- * names (read, write & close). (only used if you use sockets.c)
- */
-#if !defined LWIP_POSIX_SOCKETS_IO_NAMES || defined __DOXYGEN__
-#define LWIP_POSIX_SOCKETS_IO_NAMES     1
-#endif
-
-/**
- * LWIP_SOCKET_OFFSET==n: Increases the file descriptor number created by LwIP with n.
- * This can be useful when there are multiple APIs which create file descriptors.
- * When they all start with a different offset and you won't make them overlap you can
- * re implement read/write/close/ioctl/fnctl to send the requested action to the right
- * library (sharing select will need more work though).
- */
-#if !defined LWIP_SOCKET_OFFSET || defined __DOXYGEN__
-#define LWIP_SOCKET_OFFSET              0
-#endif
-
-/**
- * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
- * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
- * in seconds. (does not require sockets.c, and will affect tcp.c)
- */
-#if !defined LWIP_TCP_KEEPALIVE || defined __DOXYGEN__
-#define LWIP_TCP_KEEPALIVE              0
-#endif
-
-/**
- * LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and
- * SO_SNDTIMEO processing.
- */
-#if !defined LWIP_SO_SNDTIMEO || defined __DOXYGEN__
-#define LWIP_SO_SNDTIMEO                0
-#endif
-
-/**
- * LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and
- * SO_RCVTIMEO processing.
- */
-#if !defined LWIP_SO_RCVTIMEO || defined __DOXYGEN__
-#define LWIP_SO_RCVTIMEO                0
-#endif
-
-/**
- * LWIP_SO_SNDRCVTIMEO_NONSTANDARD==1: SO_RCVTIMEO/SO_SNDTIMEO take an int
- * (milliseconds, much like winsock does) instead of a struct timeval (default).
- */
-#if !defined LWIP_SO_SNDRCVTIMEO_NONSTANDARD || defined __DOXYGEN__
-#define LWIP_SO_SNDRCVTIMEO_NONSTANDARD 0
-#endif
-
-/**
- * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
- */
-#if !defined LWIP_SO_RCVBUF || defined __DOXYGEN__
-#define LWIP_SO_RCVBUF                  0
-#endif
-
-/**
- * LWIP_SO_LINGER==1: Enable SO_LINGER processing.
- */
-#if !defined LWIP_SO_LINGER || defined __DOXYGEN__
-#define LWIP_SO_LINGER                  0
-#endif
-
-/**
- * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize.
- */
-#if !defined RECV_BUFSIZE_DEFAULT || defined __DOXYGEN__
-#define RECV_BUFSIZE_DEFAULT            INT_MAX
-#endif
-
-/**
- * By default, TCP socket/netconn close waits 20 seconds max to send the FIN
- */
-#if !defined LWIP_TCP_CLOSE_TIMEOUT_MS_DEFAULT || defined __DOXYGEN__
-#define LWIP_TCP_CLOSE_TIMEOUT_MS_DEFAULT 20000
-#endif
-
-/**
- * SO_REUSE==1: Enable SO_REUSEADDR option.
- */
-#if !defined SO_REUSE || defined __DOXYGEN__
-#define SO_REUSE                        0
-#endif
-
-/**
- * SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets
- * to all local matches if SO_REUSEADDR is turned on.
- * WARNING: Adds a memcpy for every packet if passing to more than one pcb!
- */
-#if !defined SO_REUSE_RXTOALL || defined __DOXYGEN__
-#define SO_REUSE_RXTOALL                0
-#endif
-
-/**
- * LWIP_FIONREAD_LINUXMODE==0 (default): ioctl/FIONREAD returns the amount of
- * pending data in the network buffer. This is the way windows does it. It's
- * the default for lwIP since it is smaller.
- * LWIP_FIONREAD_LINUXMODE==1: ioctl/FIONREAD returns the size of the next
- * pending datagram in bytes. This is the way linux does it. This code is only
- * here for compatibility.
- */
-#if !defined LWIP_FIONREAD_LINUXMODE || defined __DOXYGEN__
-#define LWIP_FIONREAD_LINUXMODE         0
-#endif
-/**
- * @}
- */
-
-/*
-   ----------------------------------------
-   ---------- Statistics options ----------
-   ----------------------------------------
-*/
-/**
- * @defgroup lwip_opts_stats Statistics
- * @ingroup lwip_opts_debug
- * @{
- */
-/**
- * LWIP_STATS==1: Enable statistics collection in lwip_stats.
- */
-#if !defined LWIP_STATS || defined __DOXYGEN__
-#define LWIP_STATS                      1
-#endif
-
-#if LWIP_STATS
-
-/**
- * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.
- */
-#if !defined LWIP_STATS_DISPLAY || defined __DOXYGEN__
-#define LWIP_STATS_DISPLAY              0
-#endif
-
-/**
- * LINK_STATS==1: Enable link stats.
- */
-#if !defined LINK_STATS || defined __DOXYGEN__
-#define LINK_STATS                      1
-#endif
-
-/**
- * ETHARP_STATS==1: Enable etharp stats.
- */
-#if !defined ETHARP_STATS || defined __DOXYGEN__
-#define ETHARP_STATS                    (LWIP_ARP)
-#endif
-
-/**
- * IP_STATS==1: Enable IP stats.
- */
-#if !defined IP_STATS || defined __DOXYGEN__
-#define IP_STATS                        1
-#endif
-
-/**
- * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is
- * on if using either frag or reass.
- */
-#if !defined IPFRAG_STATS || defined __DOXYGEN__
-#define IPFRAG_STATS                    (IP_REASSEMBLY || IP_FRAG)
-#endif
-
-/**
- * ICMP_STATS==1: Enable ICMP stats.
- */
-#if !defined ICMP_STATS || defined __DOXYGEN__
-#define ICMP_STATS                      1
-#endif
-
-/**
- * IGMP_STATS==1: Enable IGMP stats.
- */
-#if !defined IGMP_STATS || defined __DOXYGEN__
-#define IGMP_STATS                      (LWIP_IGMP)
-#endif
-
-/**
- * UDP_STATS==1: Enable UDP stats. Default is on if
- * UDP enabled, otherwise off.
- */
-#if !defined UDP_STATS || defined __DOXYGEN__
-#define UDP_STATS                       (LWIP_UDP)
-#endif
-
-/**
- * TCP_STATS==1: Enable TCP stats. Default is on if TCP
- * enabled, otherwise off.
- */
-#if !defined TCP_STATS || defined __DOXYGEN__
-#define TCP_STATS                       (LWIP_TCP)
-#endif
-
-/**
- * MEM_STATS==1: Enable mem.c stats.
- */
-#if !defined MEM_STATS || defined __DOXYGEN__
-#define MEM_STATS                       ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0))
-#endif
-
-/**
- * MEMP_STATS==1: Enable memp.c pool stats.
- */
-#if !defined MEMP_STATS || defined __DOXYGEN__
-#define MEMP_STATS                      (MEMP_MEM_MALLOC == 0)
-#endif
-
-/**
- * SYS_STATS==1: Enable system stats (sem and mbox counts, etc).
- */
-#if !defined SYS_STATS || defined __DOXYGEN__
-#define SYS_STATS                       (NO_SYS == 0)
-#endif
-
-/**
- * IP6_STATS==1: Enable IPv6 stats.
- */
-#if !defined IP6_STATS || defined __DOXYGEN__
-#define IP6_STATS                       (LWIP_IPV6)
-#endif
-
-/**
- * ICMP6_STATS==1: Enable ICMP for IPv6 stats.
- */
-#if !defined ICMP6_STATS || defined __DOXYGEN__
-#define ICMP6_STATS                     (LWIP_IPV6 && LWIP_ICMP6)
-#endif
-
-/**
- * IP6_FRAG_STATS==1: Enable IPv6 fragmentation stats.
- */
-#if !defined IP6_FRAG_STATS || defined __DOXYGEN__
-#define IP6_FRAG_STATS                  (LWIP_IPV6 && (LWIP_IPV6_FRAG || LWIP_IPV6_REASS))
-#endif
-
-/**
- * MLD6_STATS==1: Enable MLD for IPv6 stats.
- */
-#if !defined MLD6_STATS || defined __DOXYGEN__
-#define MLD6_STATS                      (LWIP_IPV6 && LWIP_IPV6_MLD)
-#endif
-
-/**
- * ND6_STATS==1: Enable Neighbor discovery for IPv6 stats.
- */
-#if !defined ND6_STATS || defined __DOXYGEN__
-#define ND6_STATS                       (LWIP_IPV6)
-#endif
-
-/**
- * MIB2_STATS==1: Stats for SNMP MIB2.
- */
-#if !defined MIB2_STATS || defined __DOXYGEN__
-#define MIB2_STATS                      0
-#endif
-
-#else
-
-#define LINK_STATS                      0
-#define ETHARP_STATS                    0
-#define IP_STATS                        0
-#define IPFRAG_STATS                    0
-#define ICMP_STATS                      0
-#define IGMP_STATS                      0
-#define UDP_STATS                       0
-#define TCP_STATS                       0
-#define MEM_STATS                       0
-#define MEMP_STATS                      0
-#define SYS_STATS                       0
-#define LWIP_STATS_DISPLAY              0
-#define IP6_STATS                       0
-#define ICMP6_STATS                     0
-#define IP6_FRAG_STATS                  0
-#define MLD6_STATS                      0
-#define ND6_STATS                       0
-#define MIB2_STATS                      0
-
-#endif /* LWIP_STATS */
-/**
- * @}
- */
-
-/*
-   --------------------------------------
-   ---------- Checksum options ----------
-   --------------------------------------
-*/
-/**
- * @defgroup lwip_opts_checksum Checksum
- * @ingroup lwip_opts_infrastructure
- * @{
- */
-/**
- * LWIP_CHECKSUM_CTRL_PER_NETIF==1: Checksum generation/check can be enabled/disabled
- * per netif.
- * ATTENTION: if enabled, the CHECKSUM_GEN_* and CHECKSUM_CHECK_* defines must be enabled!
- */
-#if !defined LWIP_CHECKSUM_CTRL_PER_NETIF || defined __DOXYGEN__
-#define LWIP_CHECKSUM_CTRL_PER_NETIF    0
-#endif
-
-/**
- * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.
- */
-#if !defined CHECKSUM_GEN_IP || defined __DOXYGEN__
-#define CHECKSUM_GEN_IP                 1
-#endif
-
-/**
- * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.
- */
-#if !defined CHECKSUM_GEN_UDP || defined __DOXYGEN__
-#define CHECKSUM_GEN_UDP                1
-#endif
-
-/**
- * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.
- */
-#if !defined CHECKSUM_GEN_TCP || defined __DOXYGEN__
-#define CHECKSUM_GEN_TCP                1
-#endif
-
-/**
- * CHECKSUM_GEN_ICMP==1: Generate checksums in software for outgoing ICMP packets.
- */
-#if !defined CHECKSUM_GEN_ICMP || defined __DOXYGEN__
-#define CHECKSUM_GEN_ICMP               1
-#endif
-
-/**
- * CHECKSUM_GEN_ICMP6==1: Generate checksums in software for outgoing ICMP6 packets.
- */
-#if !defined CHECKSUM_GEN_ICMP6 || defined __DOXYGEN__
-#define CHECKSUM_GEN_ICMP6              1
-#endif
-
-/**
- * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.
- */
-#if !defined CHECKSUM_CHECK_IP || defined __DOXYGEN__
-#define CHECKSUM_CHECK_IP               1
-#endif
-
-/**
- * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.
- */
-#if !defined CHECKSUM_CHECK_UDP || defined __DOXYGEN__
-#define CHECKSUM_CHECK_UDP              1
-#endif
-
-/**
- * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.
- */
-#if !defined CHECKSUM_CHECK_TCP || defined __DOXYGEN__
-#define CHECKSUM_CHECK_TCP              1
-#endif
-
-/**
- * CHECKSUM_CHECK_ICMP==1: Check checksums in software for incoming ICMP packets.
- */
-#if !defined CHECKSUM_CHECK_ICMP || defined __DOXYGEN__
-#define CHECKSUM_CHECK_ICMP             1
-#endif
-
-/**
- * CHECKSUM_CHECK_ICMP6==1: Check checksums in software for incoming ICMPv6 packets
- */
-#if !defined CHECKSUM_CHECK_ICMP6 || defined __DOXYGEN__
-#define CHECKSUM_CHECK_ICMP6            1
-#endif
-
-/**
- * LWIP_CHECKSUM_ON_COPY==1: Calculate checksum when copying data from
- * application buffers to pbufs.
- */
-#if !defined LWIP_CHECKSUM_ON_COPY || defined __DOXYGEN__
-#define LWIP_CHECKSUM_ON_COPY           0
-#endif
-/**
- * @}
- */
-
-/*
-   ---------------------------------------
-   ---------- IPv6 options ---------------
-   ---------------------------------------
-*/
-/**
- * @defgroup lwip_opts_ipv6 IPv6
- * @ingroup lwip_opts
- * @{
- */
-/**
- * LWIP_IPV6==1: Enable IPv6
- */
-#if !defined LWIP_IPV6 || defined __DOXYGEN__
-#define LWIP_IPV6                       0
-#endif
-
-/**
- * LWIP_IPV6_NUM_ADDRESSES: Number of IPv6 addresses per netif.
- */
-#if !defined LWIP_IPV6_NUM_ADDRESSES || defined __DOXYGEN__
-#define LWIP_IPV6_NUM_ADDRESSES         3
-#endif
-
-/**
- * LWIP_IPV6_FORWARD==1: Forward IPv6 packets across netifs
- */
-#if !defined LWIP_IPV6_FORWARD || defined __DOXYGEN__
-#define LWIP_IPV6_FORWARD               0
-#endif
-
-/**
- * LWIP_IPV6_FRAG==1: Fragment outgoing IPv6 packets that are too big.
- */
-#if !defined LWIP_IPV6_FRAG || defined __DOXYGEN__
-#define LWIP_IPV6_FRAG                  0
-#endif
-
-/**
- * LWIP_IPV6_REASS==1: reassemble incoming IPv6 packets that fragmented
- */
-#if !defined LWIP_IPV6_REASS || defined __DOXYGEN__
-#define LWIP_IPV6_REASS                 (LWIP_IPV6)
-#endif
-
-/**
- * LWIP_IPV6_SEND_ROUTER_SOLICIT==1: Send router solicitation messages during
- * network startup.
- */
-#if !defined LWIP_IPV6_SEND_ROUTER_SOLICIT || defined __DOXYGEN__
-#define LWIP_IPV6_SEND_ROUTER_SOLICIT   1
-#endif
-
-/**
- * LWIP_IPV6_AUTOCONFIG==1: Enable stateless address autoconfiguration as per RFC 4862.
- */
-#if !defined LWIP_IPV6_AUTOCONFIG || defined __DOXYGEN__
-#define LWIP_IPV6_AUTOCONFIG            (LWIP_IPV6)
-#endif
-
-/**
- * LWIP_IPV6_DUP_DETECT_ATTEMPTS=[0..7]: Number of duplicate address detection attempts.
- */
-#if !defined LWIP_IPV6_DUP_DETECT_ATTEMPTS || defined __DOXYGEN__
-#define LWIP_IPV6_DUP_DETECT_ATTEMPTS   1
-#endif
-/**
- * @}
- */
-
-/**
- * @defgroup lwip_opts_icmp6 ICMP6
- * @ingroup lwip_opts_ipv6
- * @{
- */
-/**
- * LWIP_ICMP6==1: Enable ICMPv6 (mandatory per RFC)
- */
-#if !defined LWIP_ICMP6 || defined __DOXYGEN__
-#define LWIP_ICMP6                      (LWIP_IPV6)
-#endif
-
-/**
- * LWIP_ICMP6_DATASIZE: bytes from original packet to send back in
- * ICMPv6 error messages.
- */
-#if !defined LWIP_ICMP6_DATASIZE || defined __DOXYGEN__
-#define LWIP_ICMP6_DATASIZE             8
-#endif
-
-/**
- * LWIP_ICMP6_HL: default hop limit for ICMPv6 messages
- */
-#if !defined LWIP_ICMP6_HL || defined __DOXYGEN__
-#define LWIP_ICMP6_HL                   255
-#endif
-/**
- * @}
- */
-
-/**
- * @defgroup lwip_opts_mld6 Multicast listener discovery
- * @ingroup lwip_opts_ipv6
- * @{
- */
-/**
- * LWIP_IPV6_MLD==1: Enable multicast listener discovery protocol.
- * If LWIP_IPV6 is enabled but this setting is disabled, the MAC layer must
- * indiscriminately pass all inbound IPv6 multicast traffic to lwIP.
- */
-#if !defined LWIP_IPV6_MLD || defined __DOXYGEN__
-#define LWIP_IPV6_MLD                   (LWIP_IPV6)
-#endif
-
-/**
- * MEMP_NUM_MLD6_GROUP: Max number of IPv6 multicast groups that can be joined.
- * There must be enough groups so that each netif can join the solicited-node
- * multicast group for each of its local addresses, plus one for MDNS if
- * applicable, plus any number of groups to be joined on UDP sockets.
- */
-#if !defined MEMP_NUM_MLD6_GROUP || defined __DOXYGEN__
-#define MEMP_NUM_MLD6_GROUP             4
-#endif
-/**
- * @}
- */
-
-/**
- * @defgroup lwip_opts_nd6 Neighbor discovery
- * @ingroup lwip_opts_ipv6
- * @{
- */
-/**
- * LWIP_ND6_QUEUEING==1: queue outgoing IPv6 packets while MAC address
- * is being resolved.
- */
-#if !defined LWIP_ND6_QUEUEING || defined __DOXYGEN__
-#define LWIP_ND6_QUEUEING               (LWIP_IPV6)
-#endif
-
-/**
- * MEMP_NUM_ND6_QUEUE: Max number of IPv6 packets to queue during MAC resolution.
- */
-#if !defined MEMP_NUM_ND6_QUEUE || defined __DOXYGEN__
-#define MEMP_NUM_ND6_QUEUE              20
-#endif
-
-/**
- * LWIP_ND6_NUM_NEIGHBORS: Number of entries in IPv6 neighbor cache
- */
-#if !defined LWIP_ND6_NUM_NEIGHBORS || defined __DOXYGEN__
-#define LWIP_ND6_NUM_NEIGHBORS          10
-#endif
-
-/**
- * LWIP_ND6_NUM_DESTINATIONS: number of entries in IPv6 destination cache
- */
-#if !defined LWIP_ND6_NUM_DESTINATIONS || defined __DOXYGEN__
-#define LWIP_ND6_NUM_DESTINATIONS       10
-#endif
-
-/**
- * LWIP_ND6_NUM_PREFIXES: number of entries in IPv6 on-link prefixes cache
- */
-#if !defined LWIP_ND6_NUM_PREFIXES || defined __DOXYGEN__
-#define LWIP_ND6_NUM_PREFIXES           5
-#endif
-
-/**
- * LWIP_ND6_NUM_ROUTERS: number of entries in IPv6 default router cache
- */
-#if !defined LWIP_ND6_NUM_ROUTERS || defined __DOXYGEN__
-#define LWIP_ND6_NUM_ROUTERS            3
-#endif
-
-/**
- * LWIP_ND6_MAX_MULTICAST_SOLICIT: max number of multicast solicit messages to send
- * (neighbor solicit and router solicit)
- */
-#if !defined LWIP_ND6_MAX_MULTICAST_SOLICIT || defined __DOXYGEN__
-#define LWIP_ND6_MAX_MULTICAST_SOLICIT  3
-#endif
-
-/**
- * LWIP_ND6_MAX_UNICAST_SOLICIT: max number of unicast neighbor solicitation messages
- * to send during neighbor reachability detection.
- */
-#if !defined LWIP_ND6_MAX_UNICAST_SOLICIT || defined __DOXYGEN__
-#define LWIP_ND6_MAX_UNICAST_SOLICIT    3
-#endif
-
-/**
- * Unused: See ND RFC (time in milliseconds).
- */
-#if !defined LWIP_ND6_MAX_ANYCAST_DELAY_TIME || defined __DOXYGEN__
-#define LWIP_ND6_MAX_ANYCAST_DELAY_TIME 1000
-#endif
-
-/**
- * Unused: See ND RFC
- */
-#if !defined LWIP_ND6_MAX_NEIGHBOR_ADVERTISEMENT || defined __DOXYGEN__
-#define LWIP_ND6_MAX_NEIGHBOR_ADVERTISEMENT  3
-#endif
-
-/**
- * LWIP_ND6_REACHABLE_TIME: default neighbor reachable time (in milliseconds).
- * May be updated by router advertisement messages.
- */
-#if !defined LWIP_ND6_REACHABLE_TIME || defined __DOXYGEN__
-#define LWIP_ND6_REACHABLE_TIME         30000
-#endif
-
-/**
- * LWIP_ND6_RETRANS_TIMER: default retransmission timer for solicitation messages
- */
-#if !defined LWIP_ND6_RETRANS_TIMER || defined __DOXYGEN__
-#define LWIP_ND6_RETRANS_TIMER          1000
-#endif
-
-/**
- * LWIP_ND6_DELAY_FIRST_PROBE_TIME: Delay before first unicast neighbor solicitation
- * message is sent, during neighbor reachability detection.
- */
-#if !defined LWIP_ND6_DELAY_FIRST_PROBE_TIME || defined __DOXYGEN__
-#define LWIP_ND6_DELAY_FIRST_PROBE_TIME 5000
-#endif
-
-/**
- * LWIP_ND6_ALLOW_RA_UPDATES==1: Allow Router Advertisement messages to update
- * Reachable time and retransmission timers, and netif MTU.
- */
-#if !defined LWIP_ND6_ALLOW_RA_UPDATES || defined __DOXYGEN__
-#define LWIP_ND6_ALLOW_RA_UPDATES       1
-#endif
-
-/**
- * LWIP_ND6_TCP_REACHABILITY_HINTS==1: Allow TCP to provide Neighbor Discovery
- * with reachability hints for connected destinations. This helps avoid sending
- * unicast neighbor solicitation messages.
- */
-#if !defined LWIP_ND6_TCP_REACHABILITY_HINTS || defined __DOXYGEN__
-#define LWIP_ND6_TCP_REACHABILITY_HINTS 1
-#endif
-
-/**
- * LWIP_ND6_RDNSS_MAX_DNS_SERVERS > 0: Use IPv6 Router Advertisement Recursive
- * DNS Server Option (as per RFC 6106) to copy a defined maximum number of DNS
- * servers to the DNS module.
- */
-#if !defined LWIP_ND6_RDNSS_MAX_DNS_SERVERS || defined __DOXYGEN__
-#define LWIP_ND6_RDNSS_MAX_DNS_SERVERS  0
-#endif
-/**
- * @}
- */
-
-/**
- * LWIP_IPV6_DHCP6==1: enable DHCPv6 stateful address autoconfiguration.
- */
-#if !defined LWIP_IPV6_DHCP6 || defined __DOXYGEN__
-#define LWIP_IPV6_DHCP6                 0
-#endif
-
-/*
-   ---------------------------------------
-   ---------- Hook options ---------------
-   ---------------------------------------
-*/
-
-/**
- * @defgroup lwip_opts_hooks Hooks
- * @ingroup lwip_opts_infrastructure
- * Hooks are undefined by default, define them to a function if you need them.
- * @{
- */
-
-/**
- * LWIP_HOOK_FILENAME: Custom filename to #include in files that provide hooks.
- * Declare your hook function prototypes in there, you may also #include all headers
- * providing data types that are need in this file.
- */
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_FILENAME "path/to/my/lwip_hooks.h"
-#endif
-
-/**
- * LWIP_HOOK_TCP_ISN:
- * Hook for generation of the Initial Sequence Number (ISN) for a new TCP
- * connection. The default lwIP ISN generation algorithm is very basic and may
- * allow for TCP spoofing attacks. This hook provides the means to implement
- * the standardized ISN generation algorithm from RFC 6528 (see contrib/adons/tcp_isn),
- * or any other desired algorithm as a replacement.
- * Called from tcp_connect() and tcp_listen_input() when an ISN is needed for
- * a new TCP connection, if TCP support (@ref LWIP_TCP) is enabled.\n
- * Signature: u32_t my_hook_tcp_isn(const ip_addr_t* local_ip, u16_t local_port, const ip_addr_t* remote_ip, u16_t remote_port);
- * - it may be necessary to use "struct ip_addr" (ip4_addr, ip6_addr) instead of "ip_addr_t" in function declarations\n
- * Arguments:
- * - local_ip: pointer to the local IP address of the connection
- * - local_port: local port number of the connection (host-byte order)
- * - remote_ip: pointer to the remote IP address of the connection
- * - remote_port: remote port number of the connection (host-byte order)\n
- * Return value:
- * - the 32-bit Initial Sequence Number to use for the new TCP connection.
- */
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_TCP_ISN(local_ip, local_port, remote_ip, remote_port)
-#endif
-
-/**
- * LWIP_HOOK_IP4_INPUT(pbuf, input_netif):
- * - called from ip_input() (IPv4)
- * - pbuf: received struct pbuf passed to ip_input()
- * - input_netif: struct netif on which the packet has been received
- * Return values:
- * - 0: Hook has not consumed the packet, packet is processed as normal
- * - != 0: Hook has consumed the packet.
- * If the hook consumed the packet, 'pbuf' is in the responsibility of the hook
- * (i.e. free it when done).
- */
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_IP4_INPUT(pbuf, input_netif)
-#endif
-
-/**
- * LWIP_HOOK_IP4_ROUTE(dest):
- * - called from ip_route() (IPv4)
- * - dest: destination IPv4 address
- * Returns the destination netif or NULL if no destination netif is found. In
- * that case, ip_route() continues as normal.
- */
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_IP4_ROUTE()
-#endif
-
-/**
- * LWIP_HOOK_IP4_ROUTE_SRC(dest, src):
- * - source-based routing for IPv4 (see LWIP_HOOK_IP4_ROUTE(), src may be NULL)
- */
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_IP4_ROUTE_SRC(dest, src)
-#endif
-
-/**
- * LWIP_HOOK_ETHARP_GET_GW(netif, dest):
- * - called from etharp_output() (IPv4)
- * - netif: the netif used for sending
- * - dest: the destination IPv4 address
- * Returns the IPv4 address of the gateway to handle the specified destination
- * IPv4 address. If NULL is returned, the netif's default gateway is used.
- * The returned address MUST be directly reachable on the specified netif!
- * This function is meant to implement advanced IPv4 routing together with
- * LWIP_HOOK_IP4_ROUTE(). The actual routing/gateway table implementation is
- * not part of lwIP but can e.g. be hidden in the netif's state argument.
-*/
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_ETHARP_GET_GW(netif, dest)
-#endif
-
-/**
- * LWIP_HOOK_IP6_INPUT(pbuf, input_netif):
- * - called from ip6_input() (IPv6)
- * - pbuf: received struct pbuf passed to ip6_input()
- * - input_netif: struct netif on which the packet has been received
- * Return values:
- * - 0: Hook has not consumed the packet, packet is processed as normal
- * - != 0: Hook has consumed the packet.
- * If the hook consumed the packet, 'pbuf' is in the responsibility of the hook
- * (i.e. free it when done).
- */
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_IP6_INPUT(pbuf, input_netif)
-#endif
-
-/**
- * LWIP_HOOK_IP6_ROUTE(src, dest):
- * - called from ip6_route() (IPv6)
- * - src: sourc IPv6 address
- * - dest: destination IPv6 address
- * Returns the destination netif or NULL if no destination netif is found. In
- * that case, ip6_route() continues as normal.
- */
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_IP6_ROUTE(src, dest)
-#endif
-
-/**
- * LWIP_HOOK_ND6_GET_GW(netif, dest):
- * - called from nd6_get_next_hop_entry() (IPv6)
- * - netif: the netif used for sending
- * - dest: the destination IPv6 address
- * Returns the IPv6 address of the next hop to handle the specified destination
- * IPv6 address. If NULL is returned, a NDP-discovered router is used instead.
- * The returned address MUST be directly reachable on the specified netif!
- * This function is meant to implement advanced IPv6 routing together with
- * LWIP_HOOK_IP6_ROUTE(). The actual routing/gateway table implementation is
- * not part of lwIP but can e.g. be hidden in the netif's state argument.
-*/
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_ND6_GET_GW(netif, dest)
-#endif
-
-/**
- * LWIP_HOOK_VLAN_CHECK(netif, eth_hdr, vlan_hdr):
- * - called from ethernet_input() if VLAN support is enabled
- * - netif: struct netif on which the packet has been received
- * - eth_hdr: struct eth_hdr of the packet
- * - vlan_hdr: struct eth_vlan_hdr of the packet
- * Return values:
- * - 0: Packet must be dropped.
- * - != 0: Packet must be accepted.
- */
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_VLAN_CHECK(netif, eth_hdr, vlan_hdr)
-#endif
-
-/**
- * LWIP_HOOK_VLAN_SET:
- * Hook can be used to set prio_vid field of vlan_hdr. If you need to store data
- * on per-netif basis to implement this callback, see @ref netif_cd.
- * Called from ethernet_output() if VLAN support (@ref ETHARP_SUPPORT_VLAN) is enabled.\n
- * Signature: s32_t my_hook_vlan_set(struct netif* netif, struct pbuf* pbuf, const struct eth_addr* src, const struct eth_addr* dst, u16_t eth_type);\n
- * Arguments:
- * - netif: struct netif that the packet will be sent through
- * - p: struct pbuf packet to be sent
- * - src: source eth address
- * - dst: destination eth address
- * - eth_type: ethernet type to packet to be sent\n
- *
- *
- * Return values:
- * - &lt;0: Packet shall not contain VLAN header.
- * - 0 &lt;= return value &lt;= 0xFFFF: Packet shall contain VLAN header. Return value is prio_vid in host byte order.
- */
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_VLAN_SET(netif, p, src, dst, eth_type)
-#endif
-
-/**
- * LWIP_HOOK_MEMP_AVAILABLE(memp_t_type):
- * - called from memp_free() when a memp pool was empty and an item is now available
- */
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_MEMP_AVAILABLE(memp_t_type)
-#endif
-
-/**
- * LWIP_HOOK_UNKNOWN_ETH_PROTOCOL(pbuf, netif):
- * Called from ethernet_input() when an unknown eth type is encountered.
- * Return ERR_OK if packet is accepted, any error code otherwise.
- * Payload points to ethernet header!
- */
-#ifdef __DOXYGEN__
-#define LWIP_HOOK_UNKNOWN_ETH_PROTOCOL(pbuf, netif)
-#endif
-/**
- * @}
- */
-
-/*
-   ---------------------------------------
-   ---------- Debugging options ----------
-   ---------------------------------------
-*/
-/**
- * @defgroup lwip_opts_debugmsg Debug messages
- * @ingroup lwip_opts_debug
- * @{
- */
-/**
- * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is
- * compared against this value. If it is smaller, then debugging
- * messages are written.
- * @see debugging_levels
- */
-#if !defined LWIP_DBG_MIN_LEVEL || defined __DOXYGEN__
-#define LWIP_DBG_MIN_LEVEL              LWIP_DBG_LEVEL_ALL
-#endif
-
-/**
- * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable
- * debug messages of certain types.
- * @see debugging_levels
- */
-#if !defined LWIP_DBG_TYPES_ON || defined __DOXYGEN__
-#define LWIP_DBG_TYPES_ON               LWIP_DBG_ON
-#endif
-
-/**
- * ETHARP_DEBUG: Enable debugging in etharp.c.
- */
-#if !defined ETHARP_DEBUG || defined __DOXYGEN__
-#define ETHARP_DEBUG                    LWIP_DBG_OFF
-#endif
-
-/**
- * NETIF_DEBUG: Enable debugging in netif.c.
- */
-#if !defined NETIF_DEBUG || defined __DOXYGEN__
-#define NETIF_DEBUG                     LWIP_DBG_OFF
-#endif
-
-/**
- * PBUF_DEBUG: Enable debugging in pbuf.c.
- */
-#if !defined PBUF_DEBUG || defined __DOXYGEN__
-#define PBUF_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * API_LIB_DEBUG: Enable debugging in api_lib.c.
- */
-#if !defined API_LIB_DEBUG || defined __DOXYGEN__
-#define API_LIB_DEBUG                   LWIP_DBG_OFF
-#endif
-
-/**
- * API_MSG_DEBUG: Enable debugging in api_msg.c.
- */
-#if !defined API_MSG_DEBUG || defined __DOXYGEN__
-#define API_MSG_DEBUG                   LWIP_DBG_OFF
-#endif
-
-/**
- * SOCKETS_DEBUG: Enable debugging in sockets.c.
- */
-#if !defined SOCKETS_DEBUG || defined __DOXYGEN__
-#define SOCKETS_DEBUG                   LWIP_DBG_OFF
-#endif
-
-/**
- * ICMP_DEBUG: Enable debugging in icmp.c.
- */
-#if !defined ICMP_DEBUG || defined __DOXYGEN__
-#define ICMP_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * IGMP_DEBUG: Enable debugging in igmp.c.
- */
-#if !defined IGMP_DEBUG || defined __DOXYGEN__
-#define IGMP_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * INET_DEBUG: Enable debugging in inet.c.
- */
-#if !defined INET_DEBUG || defined __DOXYGEN__
-#define INET_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * IP_DEBUG: Enable debugging for IP.
- */
-#if !defined IP_DEBUG || defined __DOXYGEN__
-#define IP_DEBUG                        LWIP_DBG_OFF
-#endif
-
-/**
- * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass.
- */
-#if !defined IP_REASS_DEBUG || defined __DOXYGEN__
-#define IP_REASS_DEBUG                  LWIP_DBG_OFF
-#endif
-
-/**
- * RAW_DEBUG: Enable debugging in raw.c.
- */
-#if !defined RAW_DEBUG || defined __DOXYGEN__
-#define RAW_DEBUG                       LWIP_DBG_OFF
-#endif
-
-/**
- * MEM_DEBUG: Enable debugging in mem.c.
- */
-#if !defined MEM_DEBUG || defined __DOXYGEN__
-#define MEM_DEBUG                       LWIP_DBG_OFF
-#endif
-
-/**
- * MEMP_DEBUG: Enable debugging in memp.c.
- */
-#if !defined MEMP_DEBUG || defined __DOXYGEN__
-#define MEMP_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * SYS_DEBUG: Enable debugging in sys.c.
- */
-#if !defined SYS_DEBUG || defined __DOXYGEN__
-#define SYS_DEBUG                       LWIP_DBG_OFF
-#endif
-
-/**
- * TIMERS_DEBUG: Enable debugging in timers.c.
- */
-#if !defined TIMERS_DEBUG || defined __DOXYGEN__
-#define TIMERS_DEBUG                    LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_DEBUG: Enable debugging for TCP.
- */
-#if !defined TCP_DEBUG || defined __DOXYGEN__
-#define TCP_DEBUG                       LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.
- */
-#if !defined TCP_INPUT_DEBUG || defined __DOXYGEN__
-#define TCP_INPUT_DEBUG                 LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit.
- */
-#if !defined TCP_FR_DEBUG || defined __DOXYGEN__
-#define TCP_FR_DEBUG                    LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit
- * timeout.
- */
-#if !defined TCP_RTO_DEBUG || defined __DOXYGEN__
-#define TCP_RTO_DEBUG                   LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_CWND_DEBUG: Enable debugging for TCP congestion window.
- */
-#if !defined TCP_CWND_DEBUG || defined __DOXYGEN__
-#define TCP_CWND_DEBUG                  LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating.
- */
-#if !defined TCP_WND_DEBUG || defined __DOXYGEN__
-#define TCP_WND_DEBUG                   LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.
- */
-#if !defined TCP_OUTPUT_DEBUG || defined __DOXYGEN__
-#define TCP_OUTPUT_DEBUG                LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_RST_DEBUG: Enable debugging for TCP with the RST message.
- */
-#if !defined TCP_RST_DEBUG || defined __DOXYGEN__
-#define TCP_RST_DEBUG                   LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths.
- */
-#if !defined TCP_QLEN_DEBUG || defined __DOXYGEN__
-#define TCP_QLEN_DEBUG                  LWIP_DBG_OFF
-#endif
-
-/**
- * UDP_DEBUG: Enable debugging in UDP.
- */
-#if !defined UDP_DEBUG || defined __DOXYGEN__
-#define UDP_DEBUG                       LWIP_DBG_OFF
-#endif
-
-/**
- * TCPIP_DEBUG: Enable debugging in tcpip.c.
- */
-#if !defined TCPIP_DEBUG || defined __DOXYGEN__
-#define TCPIP_DEBUG                     LWIP_DBG_OFF
-#endif
-
-/**
- * SLIP_DEBUG: Enable debugging in slipif.c.
- */
-#if !defined SLIP_DEBUG || defined __DOXYGEN__
-#define SLIP_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * DHCP_DEBUG: Enable debugging in dhcp.c.
- */
-#if !defined DHCP_DEBUG || defined __DOXYGEN__
-#define DHCP_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * AUTOIP_DEBUG: Enable debugging in autoip.c.
- */
-#if !defined AUTOIP_DEBUG || defined __DOXYGEN__
-#define AUTOIP_DEBUG                    LWIP_DBG_OFF
-#endif
-
-/**
- * DNS_DEBUG: Enable debugging for DNS.
- */
-#if !defined DNS_DEBUG || defined __DOXYGEN__
-#define DNS_DEBUG                       LWIP_DBG_OFF
-#endif
-
-/**
- * IP6_DEBUG: Enable debugging for IPv6.
- */
-#if !defined IP6_DEBUG || defined __DOXYGEN__
-#define IP6_DEBUG                       LWIP_DBG_OFF
-#endif
-/**
- * @}
- */
-
-/*
-   --------------------------------------------------
-   ---------- Performance tracking options ----------
-   --------------------------------------------------
-*/
-/**
- * @defgroup lwip_opts_perf Performance
- * @ingroup lwip_opts_debug
- * @{
- */
-/**
- * LWIP_PERF: Enable performance testing for lwIP
- * (if enabled, arch/perf.h is included)
- */
-#if !defined LWIP_PERF || defined __DOXYGEN__
-#define LWIP_PERF                       0
-#endif
-/**
- * @}
- */
-
-#endif /* LWIP_HDR_OPT_H */
diff --git a/stacks/lwip_stack/release/lwip_helper_files/include/sys.h b/stacks/lwip_stack/release/lwip_helper_files/include/sys.h
deleted file mode 100644
index 8eed041..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/include/sys.h
+++ /dev/null
@@ -1,455 +0,0 @@
-/**
- * @file
- * OS abstraction layer
- */
-
-/*
- * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * This file is part of the lwIP TCP/IP stack.
- *
- * Author: Adam Dunkels <adam@sics.se>
- */
-
-#ifndef LWIP_HDR_SYS_H
-#define LWIP_HDR_SYS_H
-
-#include "lwip/opt.h"
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-#if NO_SYS
-
-/* For a totally minimal and standalone system, we provide null
-   definitions of the sys_ functions. */
-  typedef u8_t sys_sem_t;
-  typedef u8_t sys_mutex_t;
-  typedef u8_t sys_mbox_t;
-
-#define sys_sem_new(s, c) ERR_OK
-#define sys_sem_signal(s)
-#define sys_sem_wait(s)
-#define sys_arch_sem_wait(s,t)
-#define sys_sem_free(s)
-#define sys_sem_valid(s) 0
-#define sys_sem_valid_val(s) 0
-#define sys_sem_set_invalid(s)
-#define sys_sem_set_invalid_val(s)
-#define sys_mutex_new(mu) ERR_OK
-#define sys_mutex_lock(mu)
-#define sys_mutex_unlock(mu)
-#define sys_mutex_free(mu)
-#define sys_mutex_valid(mu) 0
-#define sys_mutex_set_invalid(mu)
-#define sys_mbox_new(m, s) ERR_OK
-#define sys_mbox_fetch(m,d)
-#define sys_mbox_tryfetch(m,d)
-#define sys_mbox_post(m,d)
-#define sys_mbox_trypost(m,d)
-#define sys_mbox_free(m)
-#define sys_mbox_valid(m)
-#define sys_mbox_valid_val(m)
-#define sys_mbox_set_invalid(m)
-#define sys_mbox_set_invalid_val(m)
-
-#define sys_thread_new(n,t,a,s,p)
-
-#define sys_msleep(t)
-
-#else                           /* NO_SYS */
-
-/** Return code for timeouts from sys_arch_mbox_fetch and sys_arch_sem_wait */
-#define SYS_ARCH_TIMEOUT 0xffffffffUL
-
-/** sys_mbox_tryfetch() returns SYS_MBOX_EMPTY if appropriate.
- * For now we use the same magic value, but we allow this to change in future.
- */
-#define SYS_MBOX_EMPTY SYS_ARCH_TIMEOUT
-
-#include "lwip/err.h"
-#include "arch/sys_arch.h"
-
-/** Function prototype for thread functions */
-  typedef void (*lwip_thread_fn) (void *arg);
-
-/* Function prototypes for functions to be implemented by platform ports
-   (in sys_arch.c) */
-
-/* Mutex functions: */
-
-/** Define LWIP_COMPAT_MUTEX if the port has no mutexes and binary semaphores
-    should be used instead */
-#ifndef LWIP_COMPAT_MUTEX
-#define LWIP_COMPAT_MUTEX 0
-#endif
-
-#if LWIP_COMPAT_MUTEX
-/* for old ports that don't have mutexes: define them to binary semaphores */
-#define sys_mutex_t                   sys_sem_t
-#define sys_mutex_new(mutex)          sys_sem_new(mutex, 1)
-#define sys_mutex_lock(mutex)         sys_sem_wait(mutex)
-#define sys_mutex_unlock(mutex)       sys_sem_signal(mutex)
-#define sys_mutex_free(mutex)         sys_sem_free(mutex)
-#define sys_mutex_valid(mutex)        sys_sem_valid(mutex)
-#define sys_mutex_set_invalid(mutex)  sys_sem_set_invalid(mutex)
-
-#else                           /* LWIP_COMPAT_MUTEX */
-
-/**
- * @ingroup sys_mutex
- * Create a new mutex.
- * Note that mutexes are expected to not be taken recursively by the lwIP code,
- * so both implementation types (recursive or non-recursive) should work.
- * @param mutex pointer to the mutex to create
- * @return ERR_OK if successful, another err_t otherwise
- */
-  err_t sys_mutex_new (sys_mutex_t * mutex);
-/**
- * @ingroup sys_mutex
- * Lock a mutex
- * @param mutex the mutex to lock
- */
-  void sys_mutex_lock (sys_mutex_t * mutex);
-/**
- * @ingroup sys_mutex
- * Unlock a mutex
- * @param mutex the mutex to unlock
- */
-  void sys_mutex_unlock (sys_mutex_t * mutex);
-/**
- * @ingroup sys_mutex
- * Delete a semaphore
- * @param mutex the mutex to delete
- */
-  void sys_mutex_free (sys_mutex_t * mutex);
-#ifndef sys_mutex_valid
-/**
- * @ingroup sys_mutex
- * Check if a mutex is valid/allocated: return 1 for valid, 0 for invalid
- */
-  int sys_mutex_valid (sys_mutex_t * mutex);
-#endif
-#ifndef sys_mutex_set_invalid
-/**
- * @ingroup sys_mutex
- * Set a mutex invalid so that sys_mutex_valid returns 0
- */
-  void sys_mutex_set_invalid (sys_mutex_t * mutex);
-#endif
-#endif                          /* LWIP_COMPAT_MUTEX */
-
-/* Semaphore functions: */
-
-/**
- * @ingroup sys_sem
- * Create a new semaphore
- * @param sem pointer to the semaphore to create
- * @param count initial count of the semaphore
- * @return ERR_OK if successful, another err_t otherwise
- */
-  err_t sys_sem_new (sys_sem_t * sem, u8_t count);
-/**
- * @ingroup sys_sem
- * Signals a semaphore
- * @param sem the semaphore to signal
- */
-  void sys_sem_signal (sys_sem_t * sem);
-/**
- * @ingroup sys_sem
- * Wait for a semaphore for the specified timeout
- * @param sem the semaphore to wait for
- * @param timeout timeout in milliseconds to wait (0 = wait forever)
- * @return time (in milliseconds) waited for the semaphore
- *         or SYS_ARCH_TIMEOUT on timeout
- */
-  u32_t sys_arch_sem_wait (sys_sem_t * sem, u32_t timeout);
-/**
- * @ingroup sys_sem
- * Delete a semaphore
- * @param sem semaphore to delete
- */
-  void sys_sem_free (sys_sem_t * sem);
-/** Wait for a semaphore - forever/no timeout */
-#define sys_sem_wait(sem)                  sys_arch_sem_wait(sem, 0)
-#ifndef sys_sem_valid
-/**
- * @ingroup sys_sem
- * Check if a semaphore is valid/allocated: return 1 for valid, 0 for invalid
- */
-  int sys_sem_valid (sys_sem_t * sem);
-#endif
-#ifndef sys_sem_set_invalid
-/**
- * @ingroup sys_sem
- * Set a semaphore invalid so that sys_sem_valid returns 0
- */
-  void sys_sem_set_invalid (sys_sem_t * sem);
-#endif
-#ifndef sys_sem_valid_val
-/**
- * Same as sys_sem_valid() but taking a value, not a pointer
- */
-#define sys_sem_valid_val(sem)       sys_sem_valid(&(sem))
-#endif
-#ifndef sys_sem_set_invalid_val
-/**
- * Same as sys_sem_set_invalid() but taking a value, not a pointer
- */
-#define sys_sem_set_invalid_val(sem) sys_sem_set_invalid(&(sem))
-#endif
-
-#ifndef sys_msleep
-/**
- * @ingroup sys_misc
- * Sleep for specified number of ms
- */
-  void sys_msleep (u32_t ms);   /* only has a (close to) 1 ms resolution. */
-#endif
-
-/* Mailbox functions. */
-
-/**
- * @ingroup sys_mbox
- * Create a new mbox of specified size
- * @param mbox pointer to the mbox to create
- * @param size (minimum) number of messages in this mbox
- * @return ERR_OK if successful, another err_t otherwise
- */
-  err_t sys_mbox_new (sys_mbox_t * mbox, int size);
-/**
- * @ingroup sys_mbox
- * Post a message to an mbox - may not fail
- * -> blocks if full, only used from tasks not from ISR
- * @param mbox mbox to posts the message
- * @param msg message to post (ATTENTION: can be NULL)
- */
-  void sys_mbox_post (sys_mbox_t * mbox, void *msg);
-/**
- * @ingroup sys_mbox
- * Try to post a message to an mbox - may fail if full or ISR
- * @param mbox mbox to posts the message
- * @param msg message to post (ATTENTION: can be NULL)
- */
-  err_t sys_mbox_trypost (sys_mbox_t * mbox, void *msg);
-/**
- * @ingroup sys_mbox
- * Wait for a new message to arrive in the mbox
- * @param mbox mbox to get a message from
- * @param msg pointer where the message is stored
- * @param timeout maximum time (in milliseconds) to wait for a message (0 = wait forever)
- * @return time (in milliseconds) waited for a message, may be 0 if not waited
-           or SYS_ARCH_TIMEOUT on timeout
- *         The returned time has to be accurate to prevent timer jitter!
- */
-  u32_t sys_arch_mbox_fetch (sys_mbox_t * mbox, void **msg, u32_t timeout);
-/* Allow port to override with a macro, e.g. special timeout for sys_arch_mbox_fetch() */
-#ifndef sys_arch_mbox_tryfetch
-/**
- * @ingroup sys_mbox
- * Wait for a new message to arrive in the mbox
- * @param mbox mbox to get a message from
- * @param msg pointer where the message is stored
- * @return 0 (milliseconds) if a message has been received
- *         or SYS_MBOX_EMPTY if the mailbox is empty
- */
-  u32_t sys_arch_mbox_tryfetch (sys_mbox_t * mbox, void **msg);
-#endif
-/**
- * For now, we map straight to sys_arch implementation.
- */
-#define sys_mbox_tryfetch(mbox, msg) sys_arch_mbox_tryfetch(mbox, msg)
-/**
- * @ingroup sys_mbox
- * Delete an mbox
- * @param mbox mbox to delete
- */
-  void sys_mbox_free (sys_mbox_t * mbox);
-#define sys_mbox_fetch(mbox, msg) sys_arch_mbox_fetch(mbox, msg, 0)
-#ifndef sys_mbox_valid
-/**
- * @ingroup sys_mbox
- * Check if an mbox is valid/allocated: return 1 for valid, 0 for invalid
- */
-  int sys_mbox_valid (sys_mbox_t * mbox);
-#endif
-#ifndef sys_mbox_set_invalid
-/**
- * @ingroup sys_mbox
- * Set an mbox invalid so that sys_mbox_valid returns 0
- */
-  void sys_mbox_set_invalid (sys_mbox_t * mbox);
-#endif
-#ifndef sys_mbox_valid_val
-/**
- * Same as sys_mbox_valid() but taking a value, not a pointer
- */
-#define sys_mbox_valid_val(mbox)       sys_mbox_valid(&(mbox))
-#endif
-#ifndef sys_mbox_set_invalid_val
-/**
- * Same as sys_mbox_set_invalid() but taking a value, not a pointer
- */
-#define sys_mbox_set_invalid_val(mbox) sys_mbox_set_invalid(&(mbox))
-#endif
-
-/**
- * @ingroup sys_misc
- * The only thread function:
- * Creates a new thread
- * ATTENTION: although this function returns a value, it MUST NOT FAIL (ports have to assert this!)
- * @param name human-readable name for the thread (used for debugging purposes)
- * @param thread thread-function
- * @param arg parameter passed to 'thread'
- * @param stacksize stack size in bytes for the new thread (may be ignored by ports)
- * @param prio priority of the new thread (may be ignored by ports) */
-  sys_thread_t sys_thread_new (const char *name, lwip_thread_fn thread,
-                               void *arg, int stacksize, int prio);
-
-#endif                          /* NO_SYS */
-
-/* sys_init() must be called before anything else. */
-  void sys_init (void);
-
-#ifndef sys_jiffies
-/**
- * Ticks/jiffies since power up.
- */
-  u32_t sys_jiffies (void);
-#endif
-
-/**
- * @ingroup sys_time
- * Returns the current time in milliseconds,
- * may be the same as sys_jiffies or at least based on it.
- */
-  u32_t sys_now (void);
-
-/* Critical Region Protection */
-/* These functions must be implemented in the sys_arch.c file.
-   In some implementations they can provide a more light-weight protection
-   mechanism than using semaphores. Otherwise semaphores can be used for
-   implementation */
-#ifndef SYS_ARCH_PROTECT
-/** SYS_LIGHTWEIGHT_PROT
- * define SYS_LIGHTWEIGHT_PROT in lwipopts.h if you want inter-task protection
- * for certain critical regions during buffer allocation, deallocation and memory
- * allocation and deallocation.
- */
-#if SYS_LIGHTWEIGHT_PROT
-
-/**
- * @ingroup sys_prot
- * SYS_ARCH_DECL_PROTECT
- * declare a protection variable. This macro will default to defining a variable of
- * type sys_prot_t. If a particular port needs a different implementation, then
- * this macro may be defined in sys_arch.h.
- */
-#define SYS_ARCH_DECL_PROTECT(lev) sys_prot_t lev
-/**
- * @ingroup sys_prot
- * SYS_ARCH_PROTECT
- * Perform a "fast" protect. This could be implemented by
- * disabling interrupts for an embedded system or by using a semaphore or
- * mutex. The implementation should allow calling SYS_ARCH_PROTECT when
- * already protected. The old protection level is returned in the variable
- * "lev". This macro will default to calling the sys_arch_protect() function
- * which should be implemented in sys_arch.c. If a particular port needs a
- * different implementation, then this macro may be defined in sys_arch.h
- */
-#define SYS_ARCH_PROTECT(lev) lev = sys_arch_protect()
-/**
- * @ingroup sys_prot
- * SYS_ARCH_UNPROTECT
- * Perform a "fast" set of the protection level to "lev". This could be
- * implemented by setting the interrupt level to "lev" within the MACRO or by
- * using a semaphore or mutex.  This macro will default to calling the
- * sys_arch_unprotect() function which should be implemented in
- * sys_arch.c. If a particular port needs a different implementation, then
- * this macro may be defined in sys_arch.h
- */
-#define SYS_ARCH_UNPROTECT(lev) sys_arch_unprotect(lev)
-  sys_prot_t sys_arch_protect (void);
-  void sys_arch_unprotect (sys_prot_t pval);
-
-#else
-
-#define SYS_ARCH_DECL_PROTECT(lev)
-#define SYS_ARCH_PROTECT(lev)
-#define SYS_ARCH_UNPROTECT(lev)
-
-#endif                          /* SYS_LIGHTWEIGHT_PROT */
-
-#endif                          /* SYS_ARCH_PROTECT */
-
-/*
- * Macros to set/get and increase/decrease variables in a thread-safe way.
- * Use these for accessing variable that are used from more than one thread.
- */
-
-#ifndef SYS_ARCH_INC
-#define SYS_ARCH_INC(var, val) do { \
-                                SYS_ARCH_DECL_PROTECT(old_level); \
-                                SYS_ARCH_PROTECT(old_level); \
-                                var += val; \
-                                SYS_ARCH_UNPROTECT(old_level); \
-                              } while(0)
-#endif                          /* SYS_ARCH_INC */
-
-#ifndef SYS_ARCH_DEC
-#define SYS_ARCH_DEC(var, val) do { \
-                                SYS_ARCH_DECL_PROTECT(old_level); \
-                                SYS_ARCH_PROTECT(old_level); \
-                                var -= val; \
-                                SYS_ARCH_UNPROTECT(old_level); \
-                              } while(0)
-#endif                          /* SYS_ARCH_DEC */
-
-#ifndef SYS_ARCH_GET
-#define SYS_ARCH_GET(var, ret) do { \
-                                SYS_ARCH_DECL_PROTECT(old_level); \
-                                SYS_ARCH_PROTECT(old_level); \
-                                ret = var; \
-                                SYS_ARCH_UNPROTECT(old_level); \
-                              } while(0)
-#endif                          /* SYS_ARCH_GET */
-
-#ifndef SYS_ARCH_SET
-#define SYS_ARCH_SET(var, val) do { \
-                                SYS_ARCH_DECL_PROTECT(old_level); \
-                                SYS_ARCH_PROTECT(old_level); \
-                                var = val; \
-                                SYS_ARCH_UNPROTECT(old_level); \
-                              } while(0)
-#endif                          /* SYS_ARCH_SET */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif                          /* LWIP_HDR_SYS_H */
diff --git a/stacks/lwip_stack/release/lwip_helper_files/include/timeouts.h b/stacks/lwip_stack/release/lwip_helper_files/include/timeouts.h
deleted file mode 100644
index 005db52..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/include/timeouts.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/**
- * @file
- * Timer implementations
- */
-
-/*
- * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- *
- * This file is part of the lwIP TCP/IP stack.
- *
- * Author: Adam Dunkels <adam@sics.se>
- *         Simon Goldschmidt
- *
- */
-#ifndef LWIP_HDR_TIMEOUTS_H
-#define LWIP_HDR_TIMEOUTS_H
-
-#include "lwip/opt.h"
-#include "lwip/err.h"
-#if !NO_SYS
-#include "lwip/sys.h"
-#endif
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-#ifndef LWIP_DEBUG_TIMERNAMES
-#ifdef LWIP_DEBUG
-#define LWIP_DEBUG_TIMERNAMES SYS_DEBUG
-#else                           /* LWIP_DEBUG */
-#define LWIP_DEBUG_TIMERNAMES 0
-#endif                          /* LWIP_DEBUG */
-#endif
-
-/** Function prototype for a stack-internal timer function that has to be
- * called at a defined interval */
-  typedef void (*lwip_cyclic_timer_handler) (void);
-
-/** This struct contains information about a stack-internal timer function
- that has to be called at a defined interval */
-  struct lwip_cyclic_timer
-  {
-    u32_t interval_ms;
-    lwip_cyclic_timer_handler handler;
-#if LWIP_DEBUG_TIMERNAMES
-    const char *handler_name;
-#endif                          /* LWIP_DEBUG_TIMERNAMES */
-  };
-
-/** This array contains all stack-internal cyclic timers. To get the number of
- * timers, use LWIP_ARRAYSIZE() */
-  extern const struct lwip_cyclic_timer lwip_cyclic_timers[];
-
-#if LWIP_TIMERS
-
-/** Function prototype for a timeout callback function. Register such a function
- * using sys_timeout().
- *
- * @param arg Additional argument to pass to the function - set up by sys_timeout()
- */
-  typedef void (*sys_timeout_handler) (void *arg);
-
-  struct sys_timeo
-  {
-    struct sys_timeo *next;
-    u32_t time;
-    sys_timeout_handler h;
-    void *arg;
-#if LWIP_DEBUG_TIMERNAMES
-    const char *handler_name;
-#endif                          /* LWIP_DEBUG_TIMERNAMES */
-  };
-
-  void sys_timeouts_init (void);
-
-#if LWIP_DEBUG_TIMERNAMES
-  void sys_timeout_debug (u32_t msecs, sys_timeout_handler handler, void *arg,
-                          const char *handler_name);
-#define sys_timeout(msecs, handler, arg) sys_timeout_debug(msecs, handler, arg, #handler)
-#else                           /* LWIP_DEBUG_TIMERNAMES */
-  void sys_timeout (u32_t msecs, sys_timeout_handler handler, void *arg);
-#endif                          /* LWIP_DEBUG_TIMERNAMES */
-
-  void sys_untimeout (sys_timeout_handler handler, void *arg);
-  void sys_restart_timeouts (void);
-#if NO_SYS
-  void sys_check_timeouts (void);
-  u32_t sys_timeouts_sleeptime (void);
-#else                           /* NO_SYS */
-  void sys_timeouts_mbox_fetch (sys_mbox_t * mbox, void **msg);
-#endif                          /* NO_SYS */
-
-#else                           /* LWIP_TIMERS */
-  typedef void (*sys_timeout_handler) (void *arg);
-
-  void sys_timeouts_init (void);
-  void sys_timeout (u32_t msecs, sys_timeout_handler handler, void *arg);
-  void sys_untimeout (sys_timeout_handler handler, void *arg);
-  void sys_timeouts_mbox_fetch (sys_mbox_t * mbox, void **msg);
-  void cyclic_timer (void *arg);
-  void tcpip_tcp_timer (void *arg);
-  void tcp_timer_needed (void);
-
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-#endif                          /* LWIP_HDR_TIMEOUTS_H */
diff --git a/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/atomic_32.h b/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/atomic_32.h
deleted file mode 100644
index 15a058b..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/atomic_32.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * atomic_32.h
- *
- */
-
-#ifndef ATOMIC_32_H_
-#define ATOMIC_32_H_
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-  typedef struct
-  {
-    volatile int counter;
-  } atomic_t;
-
-#define ATOMIC_INIT(i) {(i)}
-#define atomic_read(v) (*(volatile int *)&(v)->counter)
-#define atomic_set(v, i) (((v)->counter) = (i))
-
-  static inline void atomic_add (int i, atomic_t * v)
-  {
-    __asm__ __volatile__ (
-                           /*LOCK_PREFIX "addl %1,%0" */
-                           "addl %1,%0":"+m" (v->counter):"ir" (i));
-  }
-
-  static inline void atomic_sub (int i, atomic_t * v)
-  {
-    __asm__ __volatile__ (
-                           /*LOCK_PREFIX "subl %1,%0" */
-                           "subl %1,%0":"+m" (v->counter):"ir" (i));
-  }
-
-  static __inline__ void atomic_inc (atomic_t * v)
-  {
-    __asm__ __volatile__ (
-                           /*LOCK_PREFIX "incl %0" */
-                           "incl %0":"+m" (v->counter));
-  }
-
-  static __inline__ void atomic_dec (atomic_t * v)
-  {
-    __asm__ __volatile__ (
-                           /*LOCK_PREFIX "decl %0" */
-                           "decl %0":"+m" (v->counter));
-  }
-#ifdef __cplusplus
-}
-#endif
-#endif /* ATOMIC_32_H_ */
diff --git a/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/cc.h b/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/cc.h
deleted file mode 100644
index 4e21a75..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/cc.h
+++ /dev/null
@@ -1,82 +0,0 @@
-#ifndef LWIP_ARCH_CC_H
-#define LWIP_ARCH_CC_H
-
-#include <sys/time.h>
-#include <sys/types.h>
-#include <stdint.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-#ifndef LWIP_MAX_S16_NUM
-#define LWIP_MAX_S16_NUM ((s16_t)0x7fff)
-#endif
-
-#ifndef LWIP_MAX_U16_NUM
-#define LWIP_MAX_U16_NUM ((u16_t)0xFfff)
-#endif
-
-#ifndef LWIP_MAX_U32_NUM
-#define LWIP_MAX_U32_NUM ((u32_t)0xffffffff)
-#endif
-
-#ifndef LWIP_MAX_S32_NUM
-#define LWIP_MAX_S32_NUM ((s32_t)0x7fffffff)
-#endif
-
-#ifndef LWIP_MAX_U64_NUM
-#define LWIP_MAX_U64_NUM ((u64_t)0xffffffffffffffff)
-#endif
-
-#ifndef LWIP_MAX_S64_NUM
-#define LWIP_MAX_S64_NUM ((s64_t)0x7fffffffffffffff)
-#endif
-
-#define NONBLOCK_MODE_FOR_ALG 2 /* it is possible to get fail */
-#define BLOCK_MODE_FOR_ALG 1    /* will block till success */
-#define NONBLOCK_MODE_NOT_FOR_ALG 0
-
-typedef uint64_t u64_t;
-typedef int64_t s64_t;
-
-typedef uint32_t u32_t;
-typedef int32_t s32_t;
-
-typedef uint16_t u16_t;
-typedef int16_t s16_t;
-
-typedef uint8_t u8_t;
-typedef int8_t s8_t;
-
-typedef uintptr_t mem_ptr_t;
-
-#define PACK_STRUCT_FIELD(x) x
-#define PACK_STRUCT_STRUCT
-#define PACK_STRUCT_BEGIN
-#define PACK_STRUCT_END
-
-#define S16_F "d"
-#define U16_F "u"
-#define X16_F "x"
-
-#define S32_F "d"
-#define U32_F "u"
-#define X32_F "x"
-
-#define S64_F "ld"
-#define U64_F "lu"
-#define X64_F "x"
-
-#ifndef BYTE_ORDER
-#define BYTE_ORDER LITTLE_ENDIAN
-#endif
-
-//#define LWIP_PROVIDE_ERRNO
-
-#ifndef LWIP_PLATFORM_DIAG
-#define LWIP_PLATFORM_DIAG(x) do {printf x;} while(0)
-#endif
-#ifndef LWIP_DEBUG
-#define LWIP_DEBUG  1
-#endif
-#endif
diff --git a/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/queue.h b/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/queue.h
deleted file mode 100644
index 238ef05..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/queue.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef __QUEUE_H__
-#define __QUEUE_H__
-#ifdef __cplusplus
-extern "C"
-{
-
-#endif
-#include "common_mem_base_type.h"
-#ifdef HAL_LIB
-#else
-#include "rte_ring.h"
-#endif
-#include "nsfw_mem_api.h"
-//#include "stackx_dfx_api.h"
-
-#include "sys.h"
-
-  typedef struct queue
-  {
-    PRIMARY_ADDR mring_handle llring;
-  } queue_t;
-
-  err_t queue_push (queue_t * q, void *msg, int isTrypush);
-  void *queue_pop (queue_t * q, u32_t * timeout, int isTryPop);
-
-#ifdef __cplusplus
-
-}
-#endif
-#endif
diff --git a/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/sys_arch.h b/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/sys_arch.h
deleted file mode 100644
index 92ff049..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/sys_arch.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef STACKX_ARCH_SYS_ARCH_H
-#define STACKX_ARCH_SYS_ARCH_H
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-
-#include <sys/types.h>
-#include <semaphore.h>
-
-#include "cc.h"
-
-/*add by daifen 2012.7.27*/
-  typedef uint64_t sys_thread_t;
-
-  extern u64_t hz_per_ms;
-
-  void stackx_global_lock (void);
-  void stackx_global_unlock (void);
-
-#define SYS_ARCH_PROTECT(lev) stackx_global_lock()
-#define SYS_ARCH_UNPROTECT(lev) stackx_global_unlock()
-#define SYS_ARCH_DECL_PROTECT(lev)
-
-#ifdef __cplusplus
-
-}
-#endif
-#endif
diff --git a/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/win_minmax.h b/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/win_minmax.h
deleted file mode 100644
index e1e64ac..0000000
--- a/stacks/lwip_stack/release/lwip_helper_files/lwip/arch/win_minmax.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/**
- * lib/minmax.c: windowed min/max tracker by Kathleen Nichols.
- *
- */
-#ifndef MINMAX_H
-#define MINMAX_H
-
-#include  "types.h"
-#include "rtp_branch_prediction.h"
-
-/* A single data point for our parameterized min-max tracker */
-struct minmax_sample
-{
-  u32_t t;                      /* time measurement was taken */
-  u32_t v;                      /* value measured */
-};
-
-/* State for the parameterized min-max tracker */
-struct minmax
-{
-  struct minmax_sample s[3];
-};
-
-static inline u32_t
-minmax_get (const struct minmax *m)
-{
-  return m->s[0].v;
-}
-
-static inline u32_t
-minmax_reset (struct minmax *m, u32_t t, u32_t meas)
-{
-  struct minmax_sample val = {.t = t,.v = meas };
-
-  m->s[2] = m->s[1] = m->s[0] = val;
-  return m->s[0].v;
-}
-
-/* As time advances, update the 1st, 2nd, and 3rd choices. */
-static u32_t
-minmax_subwin_update (struct minmax *m, u32_t win,
-                      const struct minmax_sample *val)
-{
-  u32_t dt = val->t - m->s[0].t;
-
-  if (unlikely (dt > win))
-    {
-      /*
-       * Passed entire window without a new val so make 2nd
-       * choice the new val & 3rd choice the new 2nd choice.
-       * we may have to iterate this since our 2nd choice
-       * may also be outside the window (we checked on entry
-       * that the third choice was in the window).
-       */
-      m->s[0] = m->s[1];
-      m->s[1] = m->s[2];
-      m->s[2] = *val;
-      if (unlikely (val->t - m->s[0].t > win))
-        {
-          m->s[0] = m->s[1];
-          m->s[1] = m->s[2];
-          m->s[2] = *val;
-        }
-    }
-  else if (unlikely (m->s[1].t == m->s[0].t) && dt > win / 4)
-    {
-      /*
-       * We've passed a quarter of the window without a new val
-       * so take a 2nd choice from the 2nd quarter of the window.
-       */
-      m->s[2] = m->s[1] = *val;
-    }
-  else if (unlikely (m->s[2].t == m->s[1].t) && dt > win / 2)
-    {
-      /*
-       * We've passed half the window without finding a new val
-       * so take a 3rd choice from the last half of the window
-       */
-      m->s[2] = *val;
-    }
-  return m->s[0].v;
-}
-
-/* Check if new measurement updates the 1st, 2nd or 3rd choice max. */
-static inline u32_t
-minmax_running_max (struct minmax *m, u32_t win, u32_t t, u32_t meas)
-{
-  struct minmax_sample val = {.t = t,.v = meas };
-
-  if (unlikely (val.v >= m->s[0].v) ||  /* found new max? */
-      unlikely (val.t - m->s[2].t > win))       /* nothing left in window? */
-    return minmax_reset (m, t, meas);   /* forget earlier samples */
-
-  if (unlikely (val.v >= m->s[1].v))
-    m->s[2] = m->s[1] = val;
-  else if (unlikely (val.v >= m->s[2].v))
-    m->s[2] = val;
-
-  return minmax_subwin_update (m, win, &val);
-}
-
-/* Check if new measurement updates the 1st, 2nd or 3rd choice min. */
-static inline u32_t
-minmax_running_min (struct minmax *m, u32_t win, u32_t t, u32_t meas)
-{
-  struct minmax_sample val = {.t = t,.v = meas };
-
-  if (unlikely (val.v <= m->s[0].v) ||  /* found new min? */
-      unlikely (val.t - m->s[2].t > win))       /* nothing left in window? */
-    return minmax_reset (m, t, meas);   /* forget earlier samples */
-
-  if (unlikely (val.v <= m->s[1].v))
-    m->s[2] = m->s[1] = val;
-  else if (unlikely (val.v <= m->s[2].v))
-    m->s[2] = val;
-
-  return minmax_subwin_update (m, win, &val);
-}
-
-#endif
diff --git a/stacks/lwip_stack/release/script/nstack_fun.sh b/stacks/lwip_stack/release/script/nstack_fun.sh
deleted file mode 100755
index df62e1e..0000000
--- a/stacks/lwip_stack/release/script/nstack_fun.sh
+++ /dev/null
@@ -1,596 +0,0 @@
-#!/bin/bash
-
-check_file_size()
-{
-    if [ -n "$1" ]&&[ -f "$1" ]
-    then
-        local log_size=`stat -c %s $1`
-        if [ ${log_size} -gt $MAX_LOG_FILE_SIZE ]
-        then
-            mv $1 $1.bk
-        fi
-    fi
-}
-
-log()
-{
-    check_file_size $LOG_FILE
-
-    #1 line number
-    local printStr="$2"
-    cur_date=`date +'%m%d %H:%M:%S.%6N' -u`
-    pid=$$
-    file=$0
-    local log_head="I${cur_date} ${file##*/}:$1 ${pid}]"
-
-    printf "${log_head} $printStr\n" >> $LOG_FILE 2>/dev/null
-}
-
-get_call_stack()
-{
-    local proc_name="$1"
-    log $LINENO "gdb info in call stack:"
-    gdb -batch -ex "t a a bt" -p `pidof $proc_name`>> $LOG_FILE 2>/dev/null
-    log $LINENO "top in call stack:"
-    top -H -p `pidof $proc_name` -n 1 -b >> $LOG_FILE 2>/dev/null
-    log $LINENO "mpstat in call stack:"
-    mpstat -A >> $LOG_FILE 2>/dev/null
-}
-
-gdb_set()
-{
-    local mod="$1"
-    if [ "$mod" = "stop" ];then
-        gdb -batch -ex "set g_hbt_switch=0" -p `pidof nStackMain`
-        gdb -batch -ex "set g_hbt_switch=0" -p `pidof nStackMaster`
-        log $LINENO "gdb stop"
-    else
-        gdb -batch -ex "set g_hbt_switch=1" -p `pidof nStackMain`
-        gdb -batch -ex "set g_hbt_switch=1" -p `pidof nStackMaster`
-        log $LINENO "gdb start"
-    fi
-}
-
-get_core_mask()
-{
-    local sys_core=`cat /proc/cpuinfo | grep processor | wc -l`
-    log $LINENO "system has ${sys_core} cores"
-    #if sys_core too large 2^$sys_core will overflow; so reset sys_core; z00203440 20170323
-    if [ $sys_core -gt 8 ]
-    then
-        sys_core=8
-        log $LINENO "sys_core too large reset to ${sys_core}"
-    fi
-
-    base=`echo | awk -v ex=$sys_core 'BEGIN{a=2^ex; print a}'`
-    local temp=`expr $base - 1`
-    printf %X $temp
-    return $sys_core
-}
-
-init_log_file()
-{
-    if [ -n $LOG_FILE_DIR ]&&[ ! -f $LOG_FILE_DIR ]
-    then
-          sudo mkdir -p $LOG_FILE_DIR
-    fi
-
-    check_file_size $LOG_FILE
-
-    if [ -n $DPDK_FILE_DIR ]&&[ ! -f $DPDK_FILE_DIR ]
-    then
-        sudo mkdir -p $DPDK_FILE_DIR
-    fi
-
-    check_file_size $DPDK_FILE
-
-    #must create the directory under the current user account
-    if [ -n $RUNTIME_DIR ]&&[ ! -f $RUNTIME_DIR ]
-    then
-        mkdir -p $RUNTIME_DIR
-    fi
-}
-
-delete_log_file() {
-    if [ -n $RUNNING_FILE_DIR ]&&[ -d $RUNNING_FILE_DIR ]&&[ -n $RUNNING_FILE_NAME ]; then
-        rm -rf $RUNNING_FILE_DIR/*${RUNNING_FILE_NAME}*
-    fi
-    if [ -n $RUNNING_FILE_DIR ]&&[ -d $RUNNING_FILE_DIR ]&&[ -n $OPERATION_FILE_NAME ]; then
-        rm -rf $RUNNING_FILE_DIR/*${OPERATION_FILE_NAME}*
-    fi
-    if [ -n $RUNNING_FILE_DIR ]&&[ -d $RUNNING_FILE_DIR ]&&[ -n $GLOG_FAILURE_FILE_NAME ]; then
-        rm -rf $RUNNING_FILE_DIR/*${GLOG_FAILURE_FILE_NAME}*
-    fi
-    if [ -n $RUNNING_FILE_DIR ]&&[ -d $RUNNING_FILE_DIR ]&&[ -n $NSTACK_FAILURE_FILE_NAME ]; then
-        rm -rf $RUNNING_FILE_DIR/*${NSTACK_FAILURE_FILE_NAME}*
-    fi
-    if [ -n $MASTER_FILE_DIR ]&&[ -d $MASTER_FILE_DIR ]&&[ -n $MASTER_FILE_NAME ]; then
-        rm -rf $MASTER_FILE_DIR/*${MASTER_FILE_NAME}*
-    fi
-    if [ -n $MASTER_FILE_DIR ]&&[ -d $MASTER_FILE_DIR ]&&[ -n $GLOG_FAILURE_FILE_NAME ]; then
-        rm -rf $MASTER_FILE_DIR/*${GLOG_FAILURE_FILE_NAME}*
-    fi
-    if [ -n $MASTER_FILE_DIR ]&&[ -d $MASTER_FILE_DIR ]&&[ -n $NSTACK_FAILURE_FILE_NAME ]; then
-        rm -rf $MASTER_FILE_DIR/*${NSTACK_FAILURE_FILE_NAME}*
-    fi
-    if [ -n $LOG_FILE_DIR ]&&[ -d $LOG_FILE_DIR ]&&[ -n $LOG_FILE_NAME ]; then
-        rm -rf $LOG_FILE_DIR/*${LOG_FILE_NAME}*
-    fi
-    if [ -n $DPDK_FILE_DIR ]&&[ -d $DPDK_FILE_DIR ]&&[ -n $DPDK_FILE_NAME ]; then
-        rm -rf $DPDK_FILE_DIR/*${DPDK_FILE_NAME}*
-    fi
-    if [ -n $RUNTIME_DIR ]&&[ -d $RUNTIME_DIR ]; then
-        rm -rf $RUNTIME_DIR
-    fi
-    if [ -n ${MASTER_EXEC_PATH} ]&&[ -d $MASTER_EXEC_PATH ]; then
-        rm -rf $MASTER_EXEC_PATH
-    fi
-}
-
-init_hugepage()
-{
-    log $LINENO "init hugepage..."
-##############################################################
-#
-# TO DO:
-# verify the free pages carefully, but not with 1G pagesize
-#
-#############################################################
-
-    #for 1G hugepage
-
-    # check total hugepage number
-#    local nr_pagedir=/sys/devices/system/node/node0/hugepages/hugepages-1048576kB/nr_hugepages
-#    if [ ! -f ${nr_pagedir} ]
-#    then
-#        log $LINENO "system not support 1G huge pages, exit!"
-#        exit 1
-#    fi
-
- #   local nr_huge_pages=`cat ${nr_pagedir}`
- #   if [ ${nr_huge_pages} -lt 3 ]
- #   then
- #       log $LINENO "total huge pages is not set correctly, current ${nr_huge_pages}, exit!"
- #       exit 1
- #   fi
-
-    # check free hugepage number
-  #  local fr_pagedir=/sys/devices/system/node/node0/hugepages/hugepages-1048576kB/free_hugepages
-  #  if [ ! -f ${fr_pagedir} ]
-  #  then
-  #      log $LINENO "system not support 1G huge pages, exit!"
-  #      exit 1
-  #  fi
-
-   # local fr_huge_pages=`cat ${fr_pagedir}`
-   # if [ ${fr_huge_pages} -lt 3 ]
-   # then
-   #     log $LINENO "free huge pages is not set correctly, current ${fr_huge_pages}, exit!"
-   #     lsof $HUGE_DIR >> $LOG_FILE 2>/dev/null
-   #     exit 1
-   # fi
-
-   # mount | grep $HUGE_DIR >> $LOG_FILE 2>/dev/null
-   # if [ $? -eq 0 ] ; then
-   #     log $LINENO "$HUGE_DIR dir exist"
-   #     if test $(pgrep -f $1 | wc -l) -eq 0 ; then
-   #         log $LINENO "proccess $1 not exist and clean huge files"
-   #         if [ -n $HUGE_DIR ]&&[ -d $HUGE_DIR ]; then
-   #             rm -rf $HUGE_DIR/*
-   #         fi
-   #     else
-   #         log $LINENO "proccess $1 exist"
-   #     fi
-   # else
-   #     log $LINENO "$HUGE_DIR not exist and create"
-   #     sudo mkdir -p $HUGE_DIR
-        #directory right can't larger than 750
-
-   #     cur_user=`whoami`
-   #     if [ "root"  != "$cur_user" ]
-   #     then
-   #         non_root_uid=`id -u $cur_user`
-   #         non_root_gid=`id -g $cur_user`
-   #         sudo mount -t hugetlbfs -o pagesize=1G,uid=$non_root_uid,gid=$non_root_gid none $HUGE_DIR >> $LOG_FILE 2>/dev/null
-   #     else
-   #         mount -t hugetlbfs -o pagesize=1G none $HUGE_DIR >> $LOG_FILE 2>/dev/null
-   #     fi
-   # fi
-}
-
-recover_hugepage()
-{
-    log $LINENO "recover hugepage..."
-
-    if [ -n "$HUGE_DIR" ]&&[ -d "$HUGE_DIR" ]; then
-        rm -rf $HUGE_DIR/*
-    fi
-}
-
-init_network()
-{
-    log $LINENO "init network..."
-
-    recover_network
-
-    sudo modprobe uio
-
-    local script_path=$(cd "$(dirname "$0")"; pwd)
-    local is_igb_uio_loaded=`lsmod | grep igb_uio | wc -l`
-    if [ ${is_igb_uio_loaded} -eq 0 ]
-    then
-        log $LINENO "igb_uio is not installed. install it now."
-        sudo insmod $DPDK_MOD_PATH/igb_uio.ko
-    fi
-
-    # check if there is un-recognized nic
-    sudo $DPDK_TOOL_DIR/dpdk-devbind.py -s | grep -A32 "Other network" | \
-        grep unused | awk -F"'" '{print $1, $2}' | while read NIC_BFS BIND_DRIVER_NAME
-    do
-        local TYPE_CHECK_ixgbe=`echo $BIND_DRIVER_NAME |grep "82599ES 10-Gigabit SFI/SFP+ Network Connection"|wc -l`
-        local TYPE_CHECK_ixgbevf=`echo $BIND_DRIVER_NAME |grep "82599 Ethernet Controller Virtual Function"|wc -l`
-        local TYPE_CHECK_vmxnet3=`echo $BIND_DRIVER_NAME |grep "VMXNET3 Ethernet Controller"|wc -l`
-        local TYPE_CHECK_virtio=`echo $BIND_DRIVER_NAME |grep "Virtio network device"|wc -l`
-
-        if [ $TYPE_CHECK_ixgbe -gt 0 ]; then
-            sudo $DPDK_TOOL_DIR/dpdk-devbind.py --bind=ixgbe $NIC_BFS
-        elif [ $TYPE_CHECK_ixgbevf -gt 0 ]; then
-            sudo $DPDK_TOOL_DIR/dpdk-devbind.py --bind=ixgbevf $NIC_BFS
-        elif [ $TYPE_CHECK_vmxnet3 -gt 0 ]; then
-            sudo $DPDK_TOOL_DIR/dpdk-devbind.py --bind=vmxnet3 $NIC_BFS
-        elif [ $TYPE_CHECK_virtio -gt 0 ]; then
-            sudo $DPDK_TOOL_DIR/dpdk-devbind.py --bind=virtio-pci $NIC_BFS
-        fi
-
-    done
-}
-
-recover_network()
-{
-    log $LINENO "recover network..."
-
-    if [ -z "$DPDK_NIC_LIST_FILE" ]||[ ! -f "$DPDK_NIC_LIST_FILE" ]
-    then
-        log $LINENO "$DPDK_NIC_LIST_FILE is not exist. There is no nic used by nstack to unbind."
-    else
-        log $LINENO "The NIC(s) to unbind: "
-        cat $DPDK_NIC_LIST_FILE | awk -F" '|' | drv=| unused=" '{print $1,$4}' >> $LOG_FILE 2>/dev/null
-        cat $DPDK_NIC_LIST_FILE | awk -F" '|' | drv=| unused=" '{print $1,$4}' | while read NIC_BFS BIND_DRIVER_TYPE
-        do
-            sudo $DPDK_TOOL_DIR/dpdk-devbind.py --bind=$BIND_DRIVER_TYPE $NIC_BFS >> $LOG_FILE 2>/dev/null
-        done
-        rm $DPDK_NIC_LIST_FILE
-    fi
-
-    touch $DPDK_NIC_LIST_FILE
-    chmod 600 $DPDK_NIC_LIST_FILE
-}
-
-
-check_args_main()
-{
-if [ -z $HUGE_DIR ]||[ -z $MEM_SIZE ]||[ -z $RTP_CORE_MASK ]||[ -z $SLEEP_INTERVAL ]||\
-    [ -z $BIND_CPU ]||[ -z $START_TYPE ]
-then
-    log $LINENO "nStackMain Args is null"
-    return 1
-fi
-
-# check CORE_MASK -- see in get_core_mask()
-# check HUGE_DIR
-if [ -z $HUGE_DIR ]||[ ! -d $HUGE_DIR ]; then
-    log $LINENO "HUGE_DIR="$HUGE_DIR" is invalid"
-    return 1
-fi
-
-# check MEM_SIZE
-if [ $MEM_SIZE -lt 2048 ]||[ $MEM_SIZE -gt 32768 ]; then
-    log $LINENO "MEM_SIZE="$MEM_SIZE" is invalid"
-    return 1
-fi
-
-# check RTP_CORE_MASK
-if [ $RTP_CORE_MASK -lt 1 ]; then
-    log $LINENO "RTP_CORE_MASK="$RTP_CORE_MASK" is invalid"
-    return 1
-fi
-
-# check SLEEP_INTERVAL
-if [ $SLEEP_INTERVAL -lt 0 ]; then
-    log $LINENO "SLEEP_INTERVAL="$SLEEP_INTERVAL" is invalid"
-    return 1
-fi
-
-# check BIND_CPU
-if [ $BIND_CPU -lt 0 ]; then
-    log $LINENO "BIND_CPU="$BIND_CPU" is invalid"
-    return 1
-fi
-
-# check START_TYPE
-if [ $START_TYPE -lt 0 ]||[ $START_TYPE -gt 5 ]; then
-    log $LINENO "START_TYPE="$START_TYPE" is invalid"
-    return 1
-fi
-
-return 0
-}
-
-run_nStackMain()
-{
-
-    log $LINENO "run nstack main..."
-
-    sudo setcap CAP_IPC_OWNER,CAP_FOWNER,CAP_NET_ADMIN,CAP_IPC_LOCK,CAP_NET_RAW,CAP_SYS_RAWIO,CAP_SYS_ADMIN,CAP_CHOWN,CAP_SYS_NICE=eip ./bin/nStackMain 2>/dev/null
-
-    local script_path=$(cd "$(dirname "$0")"; pwd)
-    export NSTACK_CONFIG_PATH=${script_path}/../configure
-    export LD_LIBRARY_PATH=${script_path}/lib64/:$LD_LIBRARY_PATH
-    if [ "$NSTACK_LOG_ON" = "PERF" ]
-    then
-        export NSTACK_LOG_ON=PERF
-    else
-        export NSTACK_LOG_ON=INF
-    fi
-
-    log $LINENO "$env NSTACK_CONFIG_PATH=$NSTACK_CONFIG_PATH"
-    log $LINENO "$env DPDK_TOOL_DIR=$DPDK_TOOL_DIR"
-    log $LINENO "$env LD_LIBRARY_PATH=$LD_LIBRARY_PATH"
-    log $LINENO "$env DPDK_LIB_PATH=$DPDK_LIB_PATH"
-    log $LINENO "./nStackMain -c $1 -n 4 --huge-dir=$2 --proc-type=primary --file-prefix nStackMain -m $3 $7 $8 stack -c $4 -sleep $5 -bind_cpu $6"
-    check_file_size $DPDK_FILE
-    cd ..; cd bin/
-    ./nStackMain -c $1 -n 4 --huge-dir=$2 --proc-type=primary --file-prefix nStackMain -m $3 $7 $8 stack -c $4 -sleep $5 -bind_cpu $6 >> $DPDK_FILE &
-}
-
-
-stop_nStackProcess()
-{
-    log $LINENO "$1 exiting..."
-
-    local i=0
-
-    while [ ${i} -lt $2 ]
-    do
-        #pid=`ps aux | grep $1 |grep -v grep| awk '{print $2}'`
-        pid=`pidof $1`
-        if [ "x${pid}" != "x" ]
-        then
-            kill -9 $pid 2>/dev/null
-        else
-            break
-        fi
-        i=`expr ${i} + 1`
-        sleep 1
-    done
-}
-
-stop_nStackApps()
-{
-    log $LINENO "stop the apps that use the shared nstackhuge memory..."
-
-    app_pid=`lsof $HUGE_DIR | awk '{print $2}'`
-    if [ "x${app_pid}" != "x" ]
-    then
-        kill -9 ${app_pid} 2>/dev/null
-    fi
-}
-
-get_nstack_bin()
-{
-    local app=$1
-    master_pid=`pidof $app | head -n 1`
-    if [ "x${master_pid}" != "x" ];then
-       sudo readlink -f "/proc/${master_pid}/exe" | sed "s/$app$//g" 2>/dev/null
-    fi
-}
-
-
-
-get_abs_path()
-{
-    local input_path=$1
-    if [ -d "$input_path" -o -f "$input_path" ]; then
-        echo "$(dirname $(readlink -e $input_path))/$(basename $input_path)"
-        return 0
-    fi
-    echo $input_path
-    return 1
-}
-
-
-
-CONFIG_FILE="nStackConfig.json"
-VAR_FILE="nstack_var.sh"
-
-modify_nstack_log_path()
-{
-    if echo $1 |grep -Eq '^((/[a-zA-Z_]+[a-zA-Z0-9_-]+(/[a-zA-Z0-9_-]+)*/?)|/)$' > /dev/null
-    then
-        local parameter=$1
-    else
-        log $LINENO "the path is invalid, use the default config path!"
-        return
-    fi
-
-    if [ ! -d $1 ]; then
-        log $LINENO "the folder is not existed, use the default config!"
-        return
-    fi
-
-    if [ ! -w $1 ]; then
-        log $LINENO "the folder has no permission, use the default config!"
-        return
-    fi
-
-    local script_path=$(cd "$(dirname "$0")"; pwd)
-    local config_name=${script_path}/configure/$CONFIG_FILE
-
-    if [ ! -f $config_name ]; then
-        log $LINENO "$CONFIG_FILE no exit! use default config in code."
-        return
-    fi
-
-    sed -i 's#\("stackpool_log_path": "\).*#\1'"$1"'",#g' ${config_name}
-    sed -i 's#\("master_log_path": "\).*#\1'"$1"'",#g' ${config_name}
-    sed -i 's#\("nstack_log_path": "\).*#\1'"$1"'",#g' ${config_name}
-    sed -i 's#\("dpdk_log_path": "\).*#\1'"$1"'"#g' ${config_name}
-}
-
-modify_log_var()
-{
-    local script_path=$(cd "$(dirname "$0")"; pwd)
-    local config_name=${script_path}/configure/$CONFIG_FILE
-
-    if [ ! -f $config_name ]; then
-        log $LINENO "$CONFIG_FILE no exit! use default config in code."
-        return
-    fi
-
-    local running_log_path=`grep -Po '"stackpool_log_path": ".*?"' $config_name | sed -n -e 's/"//gp' | awk -F' ' '{print $2}'`
-    local master_log_path=`grep -Po '"master_log_path": ".*?"' $config_name | sed -n -e 's/"//gp' | awk -F' ' '{print $2}'`
-    local nstack_log_path=`grep -Po '"nstack_log_path": ".*?"' $config_name | sed -n -e 's/"//gp' | awk -F' ' '{print $2}'`
-    local dpdk_log_path=`grep -Po '"dpdk_log_path": ".*?"' $config_name | sed -n -e 's/"//gp' | awk -F' ' '{print $2}'`
-
-#modify the nstack_var.sh
-    local var_config_name=${script_path}/script/$VAR_FILE
-
-    if [ ! -f $var_config_name ]; then
-        log $LINENO "$VAR_FILE not exist , exit!"
-        exit 1
-    fi
-
-#check the path from json if it is OK.
-    if [ -n "$running_log_path" ]&&[ -w "$running_log_path" ]; then
-        sed -i "s:RUNNING_FILE_DIR=.*:RUNNING_FILE_DIR=${running_log_path}:g" $var_config_name
-    else
-        log $LINENO "stackpool_log_path:$running_log_path in $CONFIG_FILE is invalid, use the default config!"
-    fi
-
-    if [ -n "$master_log_path" ]&&[ -w "$master_log_path" ]; then
-        sed -i "s:MASTER_FILE_DIR=.*:MASTER_FILE_DIR=${master_log_path}:g" $var_config_name
-    else
-        log $LINENO "master_log_path:$master_log_path in $CONFIG_FILE is invalid, use the default config!"
-    fi
-
-    if [ -n "$nstack_log_path" ]&&[ -w "$nstack_log_path" ]; then
-        sed -i "s:LOG_FILE_DIR=.*:LOG_FILE_DIR=${nstack_log_path}:g" $var_config_name
-    else
-        log $LINENO "nstack_log_path:$nstack_log_path in $CONFIG_FILE is invalid, use the default config!"
-    fi
-
-    if [ -n "$dpdk_log_path" ]&&[ -w "$dpdk_log_path"  ]; then
-        sed -i "s:DPDK_FILE_DIR=.*:DPDK_FILE_DIR=${dpdk_log_path}:g" $var_config_name
-    else
-        log $LINENO "dpdk_log_path:$dpdk_log_path in $CONFIG_FILE is invalid, use the default config!"
-    fi
-}
-
-
-modify_local_ip_env()
-{
-
-#modify the nstack_var.sh
-    local var_config_name=${script_path}/script/$VAR_FILE
-
-    if [ ! -f $var_config_name ]; then
-        log $LINENO "$VAR_FILE not exist , exit!"
-        exit 1
-    fi
-
-    sed -i "s:VM_ID=.*:VM_ID=${nstack_alarm_local_ip}:g" $var_config_name 2>/dev/null
-}
-
-
-delete_pid_file()
-{
-        if [ -n "$PID_FILE" ]&&[ -f "$PID_FILE" ]
-        then
-            rm -rf  ${PID_FILE}
-        fi
-}
-
-save_pid_file()
-{
-	if [ ! -d ${PID_FILE_DIR} ];
-	then
-	    sudo mkdir -p ${PID_FILE_DIR}
-	    chmod 750 ${PID_FILE_DIR}
-	fi
-
-	if [ -f ${PID_FILE} ];
-	then
-	    cur_pid=`cat ${PID_FILE}`
-	    if [ ${cur_pid} != $1 ];
-	    then
-	        rm -rf  ${PID_FILE}
-	    else
-	        return
-	    fi
-	fi
-
-	touch ${PID_FILE}
-	echo $1 > $PID_FILE
-
-	chown paas:paas $PID_FILE
-	chmod 640 $PID_FILE
-}
-
-write_pid_to_file()
-{
-	retry=3
-	i=0
-	fail=1
-
-	while [ ${i} -lt ${retry} ]
-	do
-		PID=`pidof nStackMaster`
-		if [ ${PID} ]
-		then
-          fail=0
-          break
-		fi
-
-		i=`expr ${i} + 1`
-
-		sleep 1
-	done
-
-	if [ ${fail} -ne 0 ]
-	then
-		return 1
-	fi
-
-	if [ ! -d ${PID_FILE_DIR} ];
-	then
-	sudo mkdir -p ${PID_FILE_DIR}
-	chmod 750 ${PID_FILE_DIR}
-	fi
-
-	touch ${PID_FILE}
-	echo $PID > $PID_FILE
-	#check log file right
-	chown paas:paas $PID_FILE
-	chmod 640 $PID_FILE
-	return 0
-}
-
-
-
-install_config()
-{
-    # set nStackConfig values
-    if [ -n "$DEF_SOCK_NUM" ] ;then
-        sed -i "s/\"socket_num\":[ \t0-9]*,/\"socket_num\":$DEF_SOCK_NUM,/g" ./configure/nStackConfig.json
-    fi
-}
-
-copy_config()
-{
-    # $1 for src nStackServer path
-    # $2 for dst nStackServer path
-
-    # NOTE: set src socket_num value into dst path config file, this is for copying old configuration from old version to new version path when upgrading.
-    SRC_SOCK_NUM=`grep 'socket_num' $1/configure/nStackConfig.json | awk -F"," '{for (i=1;i<=NF;++i) print $i}' | awk 'gsub("\"socket_num\":","") {sub("^[ \t]*","");sub("[ \t]*$",""); print $0}'`
-    sed -i "s/\"socket_num\":[ \t0-9]*,/\"socket_num\":$SRC_SOCK_NUM,/g" $2/configure/nStackConfig.json
-}
diff --git a/stacks/lwip_stack/release/script/nstack_var.sh b/stacks/lwip_stack/release/script/nstack_var.sh
deleted file mode 100755
index a654d34..0000000
--- a/stacks/lwip_stack/release/script/nstack_var.sh
+++ /dev/null
@@ -1,65 +0,0 @@
-#!/bin/bash
-
-PID_FILE_DIR=/var/ICTS_BASE/run
-PID_FILE=${PID_FILE_DIR}/nstack.pid
-
-RUNNING_FILE_DIR=/var/log/nStack
-RUNNING_FILE_NAME=running.log
-
-OPERATION_FILE_NAME=operation.log
-NSTACK_CTRL_LOG_FILE_NAME=omc_ctrl.log
-GLOG_FAILURE_FILE_NAME=fail_dump.log
-NSTACK_FAILURE_FILE_NAME=nstack_error.log
-
-MASTER_FILE_DIR=/var/log/nStack
-MASTER_FILE_NAME=master.log
-
-LOG_FILE_DIR=/var/log/nStack
-LOG_FILE=${LOG_FILE_DIR}/nstack.log
-LOG_FILE_NAME=nstack.log
-
-DPDK_FILE_DIR=/var/log/nstack-dpdk
-DPDK_FILE=${DPDK_FILE_DIR}/nstack_dpdk.log
-DPDK_FILE_NAME=nstack_dpdk.log
-
-#this is env variable, it is for nstack usage, it will be modified from ./start_nstack -i hostinfo.ini
-
-export VM_ID=agent-node-x
-
-export DPDK_INSTALL_PATH="/usr/share/dpdk/"
-export DPDK_LIB_PATH=${DPDK_INSTALL_PATH}/x86_64-native-linuxapp-gcc/lib
-export DPDK_TOOL_DIR=${DPDK_INSTALL_PATH}/usertools
-export DPDK_MOD_PATH=/usr/lib/modules/`uname -r`/extra/dpdk
-
-cur_user=`whoami`
-if [ "root"  != "${cur_user}" ]
-then
-    HOME_DIR=$HOME
-    if [ -z "${HOME}" ]
-    then
-        HOME_DIR=/var/run
-    fi
-else
-    HOME_DIR=/var/run
-fi
-RUNTIME_DIR=$HOME_DIR/ip_module
-
-DPDK_NIC_LIST_FILE=$RUNTIME_DIR/.nstack_dpdk_nic_list
-
-#single file is 50M=50*1024*1024
-MAX_LOG_FILE_SIZE=52428800
-HUGE_PAGES=2048
-HUGE_DIR=/mnt/nstackhuge
-
-SLEEP_INTERVAL=100 # tcpip thread sleep time, unit: us
-BIND_CPU=1
-
-MEM_SIZE=3072
-RTP_CORE_MASK=2
-
-MASTER_EXEC_PATH="/product/gpaas/nStackMaster/bin"
-RUN_NSTACK_FILE=run_nstack.sh
-
-
-#default config definitions
-DEF_SOCK_NUM=8192
diff --git a/stacks/lwip_stack/release/script/run_nstack_main.sh b/stacks/lwip_stack/release/script/run_nstack_main.sh
deleted file mode 100755
index 9d6049a..0000000
--- a/stacks/lwip_stack/release/script/run_nstack_main.sh
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-
-DIR=`S=\`readlink "$0"\`; [ -z "$S" ] && S=$0; dirname $S`
-cd $DIR
-
-. ./nstack_var.sh
-. ./nstack_fun.sh
-
-########################################################
-# check parameter
-
-log $LINENO "dir=$DIR"
-
-########################################################
-# init netrork:unbind->/* modprobe uio->insmod igb_uio */->bind
-init_network
-
-########################################################
-# start nstack main
-CORE_MASK=1
-log $LINENO "start run nstackmain"
-log $LINENO "COREMASK=$CORE_MASK, HUGE_DIR=$1, MEM_SIZE=$2, RTP_CORE_MASK=$RTP_CORE_MASK, SLEEP_INTERVAL=$SLEEP_INTERVAL, BIND_CPU=$BIND_CPU"
-log $LINENO "VDEV=$VDEV, NO_PCI=$NO_PCI"
-
-run_nStackMain $CORE_MASK $1 $2 $RTP_CORE_MASK $SLEEP_INTERVAL $BIND_CPU $3 $4
-
-exit 0
diff --git a/stacks/lwip_stack/release/script/run_nstack_master.sh b/stacks/lwip_stack/release/script/run_nstack_master.sh
deleted file mode 100755
index 8da0d49..0000000
--- a/stacks/lwip_stack/release/script/run_nstack_master.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/bin/sh
-
-DIR=`S=\`readlink "$0"\`; [ -z "$S" ] && S=$0; dirname $S`
-cd $DIR
-. ./nstack_var.sh
-
-
-if [ -n "${MASTER_EXEC_PATH}" ]; then
-    mkdir -p $MASTER_EXEC_PATH
-    chown -R paas: $MASTER_EXEC_PATH
-    chmod 750 $MASTER_EXEC_PATH
-    cp ../bin/nStackMaster $MASTER_EXEC_PATH -rf
-    cp ../configure/nStackConfig.json $MASTER_EXEC_PATH -rf
-    ln -s -f $(cd "$(dirname "$0")"; pwd)/run_nstack_main.sh $MASTER_EXEC_PATH/${RUN_NSTACK_FILE}
-    cd $MASTER_EXEC_PATH
-fi
-
-runnStackMaster(){
-    sudo setcap CAP_IPC_OWNER,CAP_NET_ADMIN,CAP_DAC_OVERRIDE=eip ./nStackMaster
-
-    script_path=$(cd "$(dirname "$0")"; pwd)
-    export NSTACK_CONFIG_PATH=${script_path}
-
-    ./nStackMaster -c $1 -n 4 --huge-dir=$2 -m $3 --proc-type=$4 >> ${DPDK_FILE}
-}
-
-runnStackMaster $1 $2 $3 $4 &
-
-exit 0
diff --git a/stacks/lwip_stack/release/send_alarm.sh b/stacks/lwip_stack/release/send_alarm.sh
deleted file mode 100755
index 46ea413..0000000
--- a/stacks/lwip_stack/release/send_alarm.sh
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/bash
-
-cur_dir=$(cd "$(dirname "$0")"; pwd)
-alarm_history=${cur_dir}/.nstack_fault_alarm
-
-. ./script/nstack_var.sh
-. ./script/nstack_fun.sh
-
-if [ ! -f ${alarm_history} ]; then
-    ./nStackCtrl --module alm -n nsMain -t abnormal
-    log $LINENO "nstack is not running ok, send fault alarm"
-    touch ${alarm_history}
-else
-    log $LINENO "nstack is not running ok, send fault alarm already"
-fi
-
-exit 0
\ No newline at end of file
diff --git a/stacks/lwip_stack/release/start_nstack.sh b/stacks/lwip_stack/release/start_nstack.sh
deleted file mode 100755
index 35fe9df..0000000
--- a/stacks/lwip_stack/release/start_nstack.sh
+++ /dev/null
@@ -1,149 +0,0 @@
-#!/bin/bash
-
-
-script_path=$(cd "$(dirname "$0")"; pwd)
-
-. ${script_path}/script/nstack_var.sh
-. ${script_path}/script/nstack_fun.sh
-
-config_name=${script_path}/script/nstack_var.sh
-if [ ! -e $config_name ]; then
-    log $LINENO "nstack_var.sh not exit, plz check!"
-    exit 1
-fi
-
-########################################################
-##get the log info from the parameter of ./start -l XXX -a XXX ###
-nstack_log_path=""
-hostinfo_path=""
-ARGS=`getopt -o "l:i:a:" -l "vdev:,file-prefix:,no-pci" -n "start_nstack.sh" -- "$@"`
-eval set -- "${ARGS}"
-while true
-do
-    case "$1" in
-        -l)
-            nstack_log_path="$2"
-            shift 2
-            ;;
-        -i)
-            hostinfo_path="$2"
-            shift 2
-            ;;
-        --vdev)
-            VDEV="--vdev=$2"
-            shift 2
-            ;;
-        --file-prefix)
-            FILE_PREFIX="--file-prefix=$2"
-            shift 2
-            ;;
-        --no-pci)
-            NO_PCI="--no-pci"
-            shift 1
-            ;;
-        --)
-            shift
-            break
-            ;;
-        *)
-            echo "Option illegal, please check input!"
-            exit 1
-            ;;
-    esac
-done
-
-hostinfo_stat=0
-
-(
-flock -e -n 200
-if [ $? -eq 1 ]
-then
-    log $LINENO "another process is running now, exit"
-    exit 1
-fi
-
-########################################################
-# modify the nstack & dpdk log path config: nStackConfig.json
-if [ -n "$nstack_log_path" ]; then
-    modify_nstack_log_path $nstack_log_path
-fi
-
-if [ -n "$hostinfo_path" -a -e  "$hostinfo_path" -a -r "$hostinfo_path" ]; then
-    nstack_alarm_local_ip=($(awk -F '=' '/\['AGENT'\]/{a=1}a==1&&$1"="~/^(\s*)(VM_ID)(\s*)(=)/{print $2 ;exit}' $hostinfo_path))
-	modify_local_ip_env
-else
-    hostinfo_stat=1
-fi
-
-
-########################################################
-#set the log path in nstack_var.sh#####
-modify_log_var
-) 200>>./lockfile
-
-if [ -f "lockfile" ]; then
-    rm lockfile
-fi
-
-. ${script_path}/script/nstack_var.sh
-
-
-########################################################
-# init_log_file:nstack.log and dpdk.log
-# if need print log, the messgae need add after init_log_file
-init_log_file
-
-if [ "$hostinfo_stat"  -ne 0 ]; then
-    log $LINENO "please use correct -i parameter for start_nstack.sh"
-    log $LINENO "host info path:$hostinfo_path"
-    hostinfo_stat=0
-fi
-
-log $LINENO "######################start nstack######################"
-
-########################################################
-# check application running
-process_nstack_main=nStackMain
-
-pid_nstack=`pidof $process_nstack_main`
-
-nstack_ctrl_path=${script_path}/bin
-
-pgrep nStackMain
-main_run_status=$?
-if [ ${main_run_status} -eq 0 ]; then
-        log $LINENO "nStackMain is running ok, please stop it first!"
-        save_pid_file ${pid_master}
-        exit 0
-fi
-
-huge_files=`ls /mnt/nstackhuge`
-if [ "x${huge_files}" != "x" ]
-then
-	if [ "x${pid_nstack}" = "x" ]
-	then
-		log $LINENO "huge page file exist and nStackMain not exist"
-		exit 1
-	fi
-fi
-
-
-########################################################
-# set hugepage
-init_hugepage $process_nstack_main
-
-
-########################################################
-# install config
-install_config
-
-########################################################
-core_mask=1
-START_TYPE="primary"
-log $LINENO "./script/run_nstack_main.sh ${core_mask} $HUGE_DIR $MEM_SIZE $START_TYPE $VDEV $NO_PCI"
-${script_path}/script/run_nstack_main.sh $HUGE_DIR $MEM_SIZE $VDEV $NO_PCI
-
-print_pid=$(ps -ux | grep nStackMain | awk '{print $2}' | awk 'NR == 2')
-echo "nStackMain PID:$print_pid"
-log $LINENO "nstack start success"
-exit 0
diff --git a/stacks/lwip_stack/release/stop_nstack.sh b/stacks/lwip_stack/release/stop_nstack.sh
deleted file mode 100755
index 48d1af7..0000000
--- a/stacks/lwip_stack/release/stop_nstack.sh
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/bash
-
-
-script_path=$(cd "$(dirname "$0")"; pwd)
-
-. ${script_path}/script/nstack_var.sh
-. ${script_path}/script/nstack_fun.sh
-
-config_name=${script_path}/script/nstack_var.sh
-if [ ! -e $config_name ]; then
-    log $LINENO "$config_name not exit, plz pay attention and add back!,or it has resourcce leak."
-fi
-
-cur_user=`whoami`
-
-########################################################
-# init_log_file:nstack.log and dpdk.log
-init_log_file
-log $LINENO "#######################stop nstack#######################"
-
-#############################################
-# step1 stop nstack master
-retry=3
-stop_nStackProcess nStackMaster $retry
-
-#############################################
-# step2 stop nstack
-stop_nStackProcess nStackMain $retry
-
-
-#############################################
-# step3 stop all apps that usg the nstack hugepage
-if [ ${cur_user} = "root" ]; then
-    stop_nStackApps
-else
-    log $LINENO "not root, app not stopped"
-fi
-
-#############################################
-# step4 delete the huge page files created by nstack
-recover_hugepage
-
-#############################################
-# step5 recover the nic configuration
-recover_network
-
-#############################################
-# step6 delete pid file
-delete_pid_file
-
-exit 0
diff --git a/stacks/lwip_stack/release/uninstall.sh b/stacks/lwip_stack/release/uninstall.sh
deleted file mode 100755
index 92ae5fe..0000000
--- a/stacks/lwip_stack/release/uninstall.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/bash
-
-. ./script/nstack_var.sh
-. ./script/nstack_fun.sh
-
-########################################################
-# init_log_file:nstack.log and dpdk.log
-init_log_file
-log $LINENO "#######################uninstall nstack#######################"
-
-
-#############################################
-# step1 stop the applications that use the shared huge memory of nstack
-stop_nStackApps
-
-#############################################
-# step2 delete the huge page files created by nstack
-recover_hugepage
-
-
-#############################################
-# step3 recover the nic configuration
-recover_network
-
-
-#############################################
-# step4 delete nstack log files
-delete_log_file
-
-
-# log file has been deleted, should print on screen now
-echo "uninstall nStack successfully!"
-
-exit 0