HC2VPP-367: update ietf-nat model from 2018-02-23 to 2018-06-28

The 2018-06-28 revision:

- removes mandatory statement for limit-per-subscriber
  (previously commented out due to HC2VPP-328),

- removes logging-enable leaf that was not supported by hc2vpp

Change-Id: I36c2b05029331db03e37c016a31b32d6abf4ac06
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>

1 files changed, 2370 insertions, 0 deletions

diff --git a/nat/nat-api/src/main/yang/ietf-nat@2018-06-28.yang b/nat/nat-api/src/main/yang/ietf-nat@2018-06-28.yang
new file mode 100644
index 000000000..e67065fb7
--- /dev/null
+++ b/nat/nat-api/src/main/yang/ietf-nat@2018-06-28.yang
@@ -0,0 +1,2370 @@
+module ietf-nat {
+  yang-version 1.1;
+  namespace "urn:ietf:params:xml:ns:yang:ietf-nat";
+  prefix "nat";
+
+  import ietf-inet-types {
+    prefix inet;
+    reference
+      "Section 4 of RFC 6991";
+  }
+
+  import ietf-yang-types {
+    prefix yang;
+    reference
+      "Section 3 of RFC 6991";
+  }
+
+  import ietf-interfaces {
+    prefix if;
+    reference
+      "RFC 8343: A YANG Data Model for Interface Management";
+  }
+
+  organization
+    "IETF OPSAWG (Operations and Management Area Working Group)";
+
+  contact
+
+    "WG Web:   <https://datatracker.ietf.org/wg/opsawg/>
+     WG List:  <mailto:opsawg@ietf.org>
+
+     Editor:  Mohamed Boucadair
+              <mailto:mohamed.boucadair@orange.com>
+
+     Editor:  Senthil Sivakumar
+              <mailto:ssenthil@cisco.com>
+
+     Editor:  Christian Jacquenet
+              <mailto:christian.jacquenet@orange.com>
+
+     Editor:  Suresh Vinapamula
+              <mailto:sureshk@juniper.net>
+
+     Editor:  Qin Wu
+              <mailto:bill.wu@huawei.com>";
+
+  description
+    "This module is a YANG module for NAT implementations.
+
+     NAT44, Network Address and Protocol Translation from IPv6
+     Clients to IPv4 Servers (NAT64), Customer-side transLATor (CLAT),
+     Stateless IP/ICMP Translation (SIIT), Explicit Address Mappings
+     for Stateless IP/ICMP Translation (SIIT EAM), IPv6 Network
+     Prefix Translation (NPTv6), and Destination NAT are covered.
+
+     Copyright (c) 2018 IETF Trust and the persons identified as
+     authors of the code.  All rights reserved.
+
+     Redistribution and use in source and binary forms, with or
+     without modification, is permitted pursuant to, and subject
+     to the license terms contained in, the Simplified BSD License
+     set forth in Section 4.c of the IETF Trust's Legal Provisions
+     Relating to IETF Documents
+     (http://trustee.ietf.org/license-info).
+
+     This version of this YANG module is part of RFC XXXX; see
+     the RFC itself for full legal notices.";
+
+  revision 2018-06-28 {
+    description
+      "Initial revision.";
+    reference
+      "RFC XXXX: A YANG Module for Network Address Translation
+                 (NAT) and Network Prefix Translation (NPT)";
+  }
+
+  /*
+   * Definitions
+   */
+
+  typedef percent {
+    type uint8 {
+      range "0 .. 100";
+    }
+    description
+      "Percentage";
+  }
+
+  /*
+   * Features
+   */
+
+  feature basic-nat44{
+    description
+      "Basic NAT44 translation is limited to IP addresses alone.";
+    reference
+      "RFC 3022: Traditional IP Network Address Translator
+                 (Traditional NAT)";
+  }
+
+  feature napt44 {
+    description
+      "Network Address/Port Translator (NAPT): translation is
+      extended to include IP addresses and transport identifiers
+      (such as a TCP/UDP port or ICMP query ID).
+
+      If the internal IP address is not sufficient to uniquely
+      disambiguate NAPT44 mappings, an additional attribute is
+      required. For example, that additional attribute may
+      be an IPv6 address (a.k.a., DS-Lite) or
+      a Layer 2 identifier (a.k.a., Per-Interface NAT)";
+    reference
+      "RFC 3022: Traditional IP Network Address Translator
+                 (Traditional NAT)";
+  }
+
+  feature dst-nat {
+    description
+      "Destination NAT is a translation that acts on the destination
+       IP address and/or destination port number. This flavor is
+       usually deployed in load balancers or at devices
+       in front of public servers.";
+  }
+
+  feature nat64 {
+    description
+      "NAT64 translation allows IPv6-only clients to contact IPv4
+       servers using unicast UDP, TCP, or   ICMP.  One or more
+       public IPv4 addresses assigned to a NAT64 translator are
+       shared among several IPv6-only clients.";
+    reference
+      "RFC 6146: Stateful NAT64: Network Address and Protocol
+                 Translation from IPv6 Clients to IPv4 Servers";
+  }
+
+  feature siit {
+    description
+      "The Stateless IP/ICMP Translation Algorithm (SIIT), which
+       translates between IPv4 and IPv6 packet headers (including
+       ICMP headers).
+
+       In the stateless mode, an IP/ICMP translator converts IPv4
+       addresses to IPv6 and vice versa solely based on the
+       configuration of the stateless IP/ICMP translator and
+       information contained within the packet being translated.
+
+       The translator must support the stateless address mapping
+       algorithm defined in RFC6052, which is the default behavior.";
+    reference
+      "RFC 7915: IP/ICMP Translation Algorithm";
+  }
+
+  feature clat {
+    description
+      "CLAT is customer-side translator that algorithmically
+       translates 1:1 private IPv4 addresses to global IPv6 addresses,
+       and vice versa.
+
+       When a dedicated /64 prefix is not available for translation
+       from DHCPv6-PD, the CLAT may perform NAT44 for all IPv4 LAN
+       packets so that all the LAN-originated IPv4 packets appear
+       from a single IPv4 address and are then statelessly translated
+       to one interface IPv6 address that is claimed by the CLAT via
+       the Neighbor Discovery Protocol (NDP) and defended with
+       Duplicate Address Detection.";
+    reference
+      "RFC 6877: 464XLAT: Combination of Stateful and Stateless
+                 Translation";
+  }
+
+  feature eam {
+    description
+      "Explicit Address Mapping (EAM) is a bidirectional coupling
+       between an IPv4 Prefix and an IPv6 Prefix.";
+    reference
+     "RFC 7757: Explicit Address Mappings for Stateless IP/ICMP
+                Translation";
+  }
+
+  feature nptv6 {
+    description
+      "NPTv6 is a stateless transport-agnostic IPv6-to-IPv6
+       prefix translation.";
+    reference
+      "RFC 6296: IPv6-to-IPv6 Network Prefix Translation";
+  }
+
+  /*
+   * Identities
+   */
+
+  identity nat-type {
+    description
+      "Base identity for nat type.";
+  }
+
+  identity basic-nat44 {
+    base nat:nat-type;
+    description
+      "Identity for Basic NAT support.";
+    reference
+      "RFC 3022: Traditional IP Network Address Translator
+                 (Traditional NAT)";
+  }
+
+  identity napt44 {
+    base nat:nat-type;
+    description
+      "Identity for NAPT support.";
+    reference
+      "RFC 3022: Traditional IP Network Address Translator
+                 (Traditional NAT)";
+  }
+
+  identity dst-nat {
+    base nat:nat-type;
+    description
+      "Identity for Destination NAT support.";
+  }
+
+  identity nat64 {
+    base nat:nat-type;
+    description
+      "Identity for NAT64 support.";
+    reference
+      "RFC 6146: Stateful NAT64: Network Address and Protocol
+                 Translation from IPv6 Clients to IPv4 Servers";
+  }
+
+  identity siit {
+    base nat:nat-type;
+    description
+      "Identity for SIIT support.";
+    reference
+      "RFC 7915: IP/ICMP Translation Algorithm";
+  }
+
+  identity clat {
+    base nat:nat-type;
+    description
+      "Identity for CLAT support.";
+    reference
+      "RFC 6877: 464XLAT: Combination of Stateful and Stateless
+                 Translation";
+  }
+
+  identity eam {
+    base nat:nat-type;
+    description
+      "Identity for EAM support.";
+    reference
+     "RFC 7757: Explicit Address Mappings for Stateless IP/ICMP
+                Translation";
+  }
+
+  identity nptv6 {
+    base nat:nat-type;
+    description
+      "Identity for NPTv6 support.";
+    reference
+      "RFC 6296: IPv6-to-IPv6 Network Prefix Translation";
+  }
+
+ /*
+  * Grouping
+  */
+
+  grouping port-number {
+    description
+      "Individual port or a range of ports.
+       When only start-port-number is present,
+       it represents a single port number.";
+
+    leaf start-port-number {
+      type inet:port-number;
+      description
+        "Beginning of the port range.";
+      reference
+        "Section 3.2.9 of RFC 8045.";
+    }
+
+    leaf end-port-number {
+      type inet:port-number;
+
+      must ". >= ../start-port-number"
+        {
+          error-message
+            "The end-port-number must be greater than or
+             equal to start-port-number.";
+        }
+      description
+        "End of the port range.";
+      reference
+        "Section 3.2.10 of RFC 8045.";
+    }
+  }
+
+  grouping port-set {
+    description
+      "Indicates a set of ports.
+
+       It may be a simple port range, or use the Port Set ID (PSID)
+       algorithm to represent a range of transport layer
+       ports which will be used by a NAPT.";
+
+    choice port-type {
+      default port-range;
+      description
+        "Port type: port-range or port-set-algo.";
+      case port-range {
+         uses port-number;
+       }
+      case port-set-algo {
+        leaf psid-offset {
+          type uint8 {
+            range 0..15;
+          }
+
+          description
+            "The number of offset bits (a.k.a., 'a' bits).
+
+             Specifies the numeric value for the excluded port
+             range/offset bits.
+
+             Allowed values are between 0 and 15 ";
+
+          reference
+            "Section 5.1 of RFC 7597";
+        }
+
+        leaf psid-len {
+          type uint8 {
+             range 0..15;
+          }
+          mandatory true;
+
+         description
+           "The length of PSID, representing the sharing
+            ratio for an IPv4 address.
+
+            (also known as 'k').
+
+            The address-sharing ratio would be 2^k.";
+          reference
+            "Section 5.1 of RFC 7597";
+        }
+
+        leaf psid {
+          type uint16;
+          mandatory true;
+          description
+            "Port Set Identifier (PSID) value, which
+             identifies a set of ports algorithmically.";
+          reference
+            "Section 5.1 of RFC 7597";
+        }
+      }
+      reference
+        "Section 7597: Mapping of Address and Port with
+                       Encapsulation (MAP-E)";
+    }
+  }
+
+  grouping mapping-entry {
+    description
+      "NAT mapping entry.
+
+       If an attribute is not stored in the mapping/session table,
+       this means the corresponding fields of a packet that
+       matches this entry is not rewritten by the NAT or this
+       information is not required for NAT filtering purposes.";
+
+    leaf index {
+      type uint32;
+      description
+        "A unique identifier of a mapping entry. This identifier can be
+         automatically assigned by the NAT instance or be explicitly
+         configured.";
+    }
+
+    leaf type {
+      type enumeration {
+        enum "static"  {
+          description
+            "The mapping entry is explicitly configured
+             (e.g., via command-line interface).";
+        }
+
+        enum "dynamic-implicit" {
+          description
+            "This mapping is created implicitly as a side effect
+             of processing a packet that requires a new mapping.";
+
+        }
+
+        enum "dynamic-explicit" {
+          description
+            "This mapping is created as a result of an explicit
+             request, e.g., a PCP message.";
+
+        }
+      }
+        description
+          "Indicates the type of a mapping entry. E.g.,
+           a mapping can be: static, implicit dynamic
+           or explicit dynamic.";
+    }
+
+    leaf transport-protocol {
+      type uint8;
+      description
+        "Upper-layer protocol associated with this mapping.
+         Values are taken from the IANA protocol registry.
+         For example, this field contains 6 (TCP) for a TCP
+         mapping or 17 (UDP) for a UDP mapping.
+
+         If this leaf is not instantiated, then the mapping
+         applies to any protocol.";
+    }
+
+    leaf internal-src-address {
+      type inet:ip-prefix;
+      description
+        "Corresponds to the source IPv4/IPv6 address/prefix
+         of the packet received on an internal
+         interface.";
+    }
+
+    container internal-src-port {
+      description
+        "Corresponds to the source port of the packet received
+         on an internal interface.
+
+         It is used also to indicate the internal source ICMP
+         identifier.
+
+         As a reminder, all the ICMP Query messages contain
+         an 'Identifier' field, which is referred to in this
+         document as the 'ICMP Identifier'.";
+
+       uses port-number;
+    }
+
+    leaf external-src-address {
+      type inet:ip-prefix;
+      description
+        "Source IP address/prefix of the packet sent on an
+         external interface of the NAT.";
+    }
+
+    container external-src-port {
+      description
+        "Source port of the packet sent on an external
+         interface of the NAT.
+
+         It is used also to indicate the external source ICMP
+         identifier.";
+
+      uses port-number;
+    }
+
+    leaf internal-dst-address {
+      type inet:ip-prefix;
+      description
+        "Corresponds to the destination IP address/prefix
+         of the packet received on an internal interface
+         of the NAT.
+
+         For example, some NAT implementations support
+         the translation of both source and destination
+         addresses and ports, sometimes referred to
+         as 'Twice NAT'.";
+      }
+
+    container internal-dst-port {
+      description
+        "Corresponds to the destination port of the
+         IP packet received on the internal interface.
+
+         It is used also to include the internal
+         destination ICMP identifier.";
+
+      uses port-number;
+    }
+
+    leaf external-dst-address {
+      type inet:ip-prefix;
+      description
+        "Corresponds to the destination IP address/prefix
+         of the packet sent on an external interface
+         of the NAT.";
+    }
+
+    container external-dst-port {
+      description
+        "Corresponds to the destination port number of
+         the packet sent on the external interface
+         of the NAT.
+
+         It is used also to include the external
+         destination ICMP identifier.";
+
+      uses port-number;
+    }
+    leaf lifetime {
+      type uint32;
+      units "seconds";
+      description
+        "When specified, it is used to track the connection that is
+         fully-formed (e.g., once the three-way handshake
+         TCP is completed) or the duration for maintaining
+         an explicit mapping alive. The mapping entry will be
+         removed by the NAT instance once this lifetime is expired.
+
+         When reported in a get operation, the lifetime indicates
+         the remaining validity lifetime.
+
+         Static mappings may not be associated with a
+         lifetime. If no lifetime is associated with a
+         static mapping, an explicit action is required to
+         remove that mapping.";
+    }
+  }
+
+ /*
+  * NAT Module
+  */
+
+  container nat {
+    description
+      "NAT module";
+
+    container instances {
+      description
+        "NAT instances";
+
+      list instance {
+        key "id";
+
+        description
+          "A NAT instance. This identifier can be automatically assigned
+           or explicitly configured.";
+
+        leaf id {
+          type uint32;
+          must ". >= 1";
+          description
+            "NAT instance identifier.
+
+             The identifier must be greater than zero.";
+          reference
+            "RFC 7659: Definitions of Managed Objects for Network
+                     Address Translators (NATs)";
+        }
+
+        leaf name {
+          type string;
+          description
+            "A name associated with the NAT instance.";
+          reference
+            "RFC 7659: Definitions of Managed Objects for Network
+                     Address Translators (NATs)";
+        }
+
+        leaf enable {
+          type boolean;
+          description
+            "Status of the  NAT instance.";
+        }
+
+        container capabilities {
+          config false;
+
+          description
+            "NAT capabilities";
+
+          leaf-list nat-flavor {
+            type identityref {
+              base nat-type;
+            }
+            description
+              "Supported translation type(s).";
+          }
+
+          leaf-list per-interface-binding {
+            type enumeration {
+              enum "unsupported"  {
+                description
+                  "No capability to associate a NAT binding with
+                   an extra identifier.";
+            }
+
+            enum "layer-2"  {
+              description
+                "The NAT instance is able to associate a mapping with
+                 a layer-2 identifier.";
+            }
+
+            enum "dslite"  {
+              description
+                "The NAT instance is able to associate a mapping with
+                 an IPv6 address (a.k.a., DS-Lite).";
+            }
+          }
+          description
+            "Indicates the capability of a NAT to associate a particular
+             NAT session not only with the five tuples used for the
+             transport connection on both sides of the NAT but also with
+             the internal interface on which the user device is
+             connected to the NAT.";
+          reference
+            "Section 4 of RFC 6619";
+        }
+
+        list transport-protocols {
+          key protocol-id;
+
+          description
+            "List of supported protocols.";
+
+          leaf protocol-id {
+            type uint8;
+            mandatory true;
+            description
+              "Upper-layer protocol associated with this mapping.
+
+               Values are taken from the IANA protocol registry:
+               https://www.iana.org/assignments/protocol-numbers/
+               protocol-numbers.xhtml
+
+               For example, this field contains 6 (TCP) for a TCP
+               mapping or 17 (UDP) for a UDP mapping.";
+          }
+
+          leaf protocol-name {
+            type string;
+            description
+              "The name of the Upper-layer protocol associated
+               with this mapping.
+
+               Values are taken from the IANA protocol registry:
+               https://www.iana.org/assignments/protocol-numbers/
+               protocol-numbers.xhtml
+
+               For example, TCP, UDP, DCCP, and SCTP.";
+          }
+        }
+
+        leaf restricted-port-support {
+          type boolean;
+          description
+            "Indicates source port NAT restriction support.";
+          reference
+             "RFC 7596: Lightweight 4over6: An Extension to
+                        the Dual-Stack Lite Architecture.";
+        }
+
+        leaf static-mapping-support {
+          type boolean;
+          description
+            "Indicates whether static mappings are supported.";
+        }
+
+        leaf port-randomization-support {
+          type boolean;
+          description
+            "Indicates whether port randomization is supported.";
+          reference
+            "Section 4.2.1 of RFC 4787.";
+        }
+
+        leaf port-range-allocation-support {
+          type boolean;
+          description
+            "Indicates whether port range allocation is supported.";
+          reference
+            "Section 1.1 of RFC 7753.";
+        }
+
+        leaf port-preservation-suport {
+          type boolean;
+          description
+            "Indicates whether port preservation is supported.";
+          reference
+            "Section 4.2.1 of RFC 4787.";
+        }
+
+        leaf port-parity-preservation-support {
+          type boolean;
+          description
+            "Indicates whether port parity preservation is
+             supported.";
+          reference
+            "Section 8 of RFC 7857.";
+        }
+
+        leaf address-roundrobin-support {
+          type boolean;
+          description
+           "Indicates whether address allocation round robin is
+            supported.";
+        }
+
+        leaf paired-address-pooling-support {
+          type boolean;
+          description
+            "Indicates whether paired-address-pooling is
+             supported";
+           reference
+             "REQ-2 of RFC 4787.";
+        }
+
+        leaf endpoint-independent-mapping-support {
+          type boolean;
+          description
+            "Indicates whether endpoint-independent-
+             mapping is supported.";
+           reference
+             "Section 4 of RFC 4787.";
+        }
+
+        leaf address-dependent-mapping-support {
+          type boolean;
+          description
+            "Indicates whether address-dependent-mapping is
+             supported.";
+           reference
+             "Section 4 of RFC 4787.";
+        }
+
+        leaf address-and-port-dependent-mapping-support {
+          type boolean;
+          description
+            "Indicates whether address-and-port-dependent-mapping is
+             supported.";
+           reference
+             "Section 4 of RFC 4787.";
+        }
+
+        leaf endpoint-independent-filtering-support {
+          type boolean;
+          description
+            "Indicates whether endpoint-independent-filtering is
+             supported.";
+           reference
+             "Section 5 of RFC 4787.";
+        }
+
+        leaf address-dependent-filtering {
+          type boolean;
+          description
+            "Indicates whether address-dependent-filtering is
+             supported.";
+           reference
+             "Section 5 of RFC 4787.";
+        }
+
+        leaf address-and-port-dependent-filtering {
+          type boolean;
+          description
+            "Indicates whether address-and-port-dependent is
+             supported.";
+           reference
+             "Section 5 of RFC 4787.";
+        }
+
+        leaf fragment-behavior {
+          type enumeration {
+            enum "unsupported"  {
+              description
+                "No capability to translate incoming fragments.
+                 All received fragments are dropped.";
+            }
+
+            enum "in-order"  {
+              description
+                "The NAT instance is able to translate fragments only if
+                 they are received in order. That is, in particular the
+                 header is in the first packet. Fragments received
+                 out of order are dropped. ";
+            }
+
+            enum "out-of-order"  {
+              description
+                "The NAT instance is able to translate a fragment even
+                 if it is received out of order.
+
+                 This behavior is recommended.";
+              reference
+                "REQ-14 of RFC 4787";
+            }
+          }
+          description
+            "The fragment behavior is the NAT instance's capability to
+             translate fragments received on the external interface of
+             the NAT.";
+        }
+      }
+
+      leaf type {
+        type identityref {
+          base nat-type;
+        }
+        description
+          "Specify the translation type. Particularly useful when
+           multiple  translation flavors are supported.
+
+           If one type is supported by a NAT, this parameter is by
+           default set to that type.";
+      }
+
+      leaf per-interface-binding {
+        type enumeration {
+          enum "disabled"  {
+            description
+              "Disable the capability to associate an extra identifier
+               with NAT mappings.";
+          }
+
+          enum "layer-2"  {
+            description
+              "The NAT instance is able to associate a mapping with
+               a layer-2 identifier.";
+          }
+
+          enum "dslite"  {
+            description
+              "The NAT instance is able to associate a mapping with
+               an IPv6 address (a.k.a., DS-Lite).";
+          }
+        }
+        description
+          "A NAT that associates a particular NAT session not only with
+           the five tuples used for the transport connection on both
+           sides of the NAT but also with the internal interface on
+           which the user device is connected to the NAT.
+
+           If supported, this mode of operation should be configurable,
+           and it should be disabled by default in general-purpose NAT
+           devices.
+           If one single per-interface binding behavior is supported by
+           a NAT, this parameter is by default set to that behavior.";
+        reference
+          "Section 4 of RFC 6619";
+      }
+
+      list nat-pass-through {
+        if-feature "basic-nat44 or napt44 or dst-nat";
+        key id;
+
+        description
+         "IP prefix NAT pass through.";
+
+        leaf id {
+          type uint32;
+          description
+            "An identifier of the IP prefix pass through.";
+        }
+
+        leaf prefix {
+          type inet:ip-prefix;
+          mandatory true;
+          description
+            "The IP addresses that match should not be translated.
+
+             It must be possible to administratively turn
+             off translation for specific destination addresses
+             and/or ports.";
+          reference
+            "REQ#6 of RFC 6888.";
+        }
+
+        leaf port {
+          type inet:port-number;
+          description
+            "It must be possible to administratively turn off
+             translation for specific destination addresses
+             and/or ports.
+
+             If no prefix is defined, the NAT pass through bound
+             to a given port applies for any destination address.";
+          reference
+            "REQ#6 of RFC 6888.";
+        }
+      }
+
+     list policy {
+       key id;
+       description
+         "NAT parameters for a given instance";
+
+       leaf id {
+         type uint32;
+         description
+           "An identifier of the NAT policy. It must be unique
+            within the NAT instance.";
+       }
+
+       container clat-parameters {
+         if-feature clat;
+         description
+           "CLAT parameters.";
+
+         list clat-ipv6-prefixes {
+           key ipv6-prefix;
+           description
+             "464XLAT double translation treatment is stateless when a
+              dedicated /64 is available for translation on the CLAT.
+              Otherwise, the CLAT will have both stateful and stateless
+              since it requires NAT44 from the LAN to a single IPv4
+              address and then stateless translation to a single
+              IPv6 address.";
+            reference
+              "RFC 6877: 464XLAT: Combination of Stateful and Stateless
+                         Translation";
+
+            leaf ipv6-prefix {
+              type inet:ipv6-prefix;
+              description
+                "An IPv6 prefix used for CLAT.";
+            }
+          }
+
+          list ipv4-prefixes {
+            key ipv4-prefix;
+            description
+              "Pool of IPv4 addresses used for CLAT.
+               192.0.0.0/29 is the IPv4 service continuity prefix.";
+            reference
+              "RFC 7335: IPv4 Service Continuity Prefix";
+
+            leaf ipv4-prefix {
+              type inet:ipv4-prefix;
+              description
+                "464XLAT double translation treatment is
+                 stateless when a dedicated /64 is available
+                 for translation on the CLAT.  Otherwise, the
+                 CLAT will have both stateful and stateless
+                 since it requires NAT44 from the LAN to
+                 a single IPv4 address and then stateless
+                 translation to a single IPv6 address.
+                 The CLAT performs NAT44 for all IPv4 LAN
+                 packets so that all the LAN-originated IPv4
+                 packets appear from a single IPv4 address
+                 and are then statelessly translated to one
+                 interface IPv6 address that is claimed by
+                 the CLAT.
+
+                 An IPv4 address from this pool is also
+                 provided to an application that makes
+                 use of literals.";
+
+             reference
+               "RFC 6877: 464XLAT: Combination of Stateful and Stateless
+                          Translation";
+           }
+         }
+       }
+
+       list nptv6-prefixes {
+         if-feature nptv6;
+         key internal-ipv6-prefix ;
+         description
+           "Provides one or a list of (internal IPv6 prefix,
+            external IPv6 prefix) required for NPTv6.
+
+            In its simplest form, NPTv6 interconnects two network
+            links, one of which is an 'internal' network link
+            attached to a leaf network within a single
+            administrative domain and the other of which is an
+            'external' network with connectivity to the global
+            Internet.";
+          reference
+            "RFC 6296: IPv6-to-IPv6 Network Prefix Translation";
+
+          leaf internal-ipv6-prefix {
+            type inet:ipv6-prefix;
+            mandatory true;
+            description
+              "An IPv6 prefix used by an internal interface of NPTv6.";
+            reference
+              "RFC 6296: IPv6-to-IPv6 Network Prefix Translation";
+         }
+
+         leaf external-ipv6-prefix {
+           type inet:ipv6-prefix;
+            mandatory true;
+           description
+             "An IPv6 prefix used by the external interface of NPTv6.";
+           reference
+             "RFC 6296: IPv6-to-IPv6 Network Prefix Translation";
+         }
+       }
+
+       list eam {
+         if-feature eam;
+         key ipv4-prefix;
+         description
+           "The Explicit Address Mapping Table, a conceptual
+            table in which each row represents an EAM.
+
+            Each EAM describes a mapping between IPv4 and IPv6
+            prefixes/addresses.";
+         reference
+           "Section 3.1 of RFC 7757.";
+
+         leaf ipv4-prefix {
+           type inet:ipv4-prefix;
+           mandatory true;
+           description
+             "The IPv4 prefix of an EAM.";
+           reference
+             "Section 3.2 of RFC 7757.";
+         }
+
+         leaf ipv6-prefix {
+           type inet:ipv6-prefix;
+            mandatory true;
+           description
+             "The IPv6 prefix of an EAM.";
+           reference
+             "Section 3.2 of RFC 7757.";
+         }
+       }
+
+       list nat64-prefixes {
+         if-feature "siit or nat64 or clat";
+         key nat64-prefix;
+         description
+           "Provides one or a list of NAT64 prefixes
+            with or without a list of destination IPv4 prefixes.
+            It allows mapping IPv4 address ranges to IPv6 prefixes.
+            For example:
+            192.0.2.0/24 is mapped to 2001:db8:122:300::/56.
+            198.51.100.0/24 is mapped to 2001:db8:122::/48.";
+         reference
+           "Section 5.1 of RFC 7050.";
+
+         leaf nat64-prefix {
+           type inet:ipv6-prefix;
+           mandatory true;
+           description
+             "A NAT64 prefix. Can be Network-Specific Prefix (NSP) or
+              Well-Known Prefix (WKP).
+
+              Organizations deploying stateless IPv4/IPv6 translation
+              should assign a Network-Specific Prefix to their
+              IPv4/IPv6 translation service.
+
+              For stateless NAT64, IPv4-translatable IPv6 addresses
+              must use the selected Network-Specific Prefix.
+
+              Both IPv4-translatable IPv6 addresses and IPv4-converted
+              IPv6 addresses should use the same prefix.";
+           reference
+             "Sections 3.3 and 3.4 of RFC 6052.";
+         }
+
+         list destination-ipv4-prefix {
+           key ipv4-prefix;
+           description
+             "An IPv4 prefix/address.";
+
+           leaf ipv4-prefix {
+             type inet:ipv4-prefix;
+             description
+               "An IPv4 address/prefix.";
+            }
+          }
+
+          leaf stateless-enable {
+            type boolean;
+            default false;
+            description
+              "Enable explicitly stateless NAT64.";
+         }
+       }
+
+       list external-ip-address-pool {
+         if-feature "basic-nat44 or napt44 or nat64";
+         key pool-id;
+
+         description
+           "Pool of external IP addresses used to service internal
+            hosts.
+
+            A pool is a set of IP prefixes.";
+
+         leaf pool-id {
+           type uint32;
+           must ". >= 1";
+           description
+             "An identifier that uniquely identifies the address pool
+              within a NAT instance.
+
+              The identifier must be greater than zero.";
+           reference
+             "RFC 7659: Definitions of Managed Objects for
+                        Network Address Translators (NATs)";
+         }
+
+         leaf external-ip-pool {
+           type inet:ipv4-prefix;
+           mandatory true;
+           description
+             "An IPv4 prefix used for NAT purposes.";
+         }
+       }
+
+       container port-set-restrict {
+         if-feature "napt44 or nat64";
+         description
+           "Configures contiguous and non-contiguous port ranges.
+
+            The port set is used to restrict the external source
+            port numbers used by the translator.";
+
+         uses port-set;
+       }
+
+       leaf dst-nat-enable {
+         if-feature "basic-nat44 or napt44";
+         type boolean;
+         default false;
+         description
+           "Enable/Disable destination NAT.
+
+            A NAT44 may be configured to enable Destination
+            NAT, too.";
+        }
+
+        list dst-ip-address-pool {
+          if-feature dst-nat;
+          key pool-id;
+          description
+            "Pool of IP addresses used for destination NAT.";
+
+          leaf pool-id {
+            type uint32;
+            description
+              "An identifier of the address pool.";
+          }
+
+          leaf dst-in-ip-pool {
+            type inet:ip-prefix;
+            description
+              "Is used to identify an internal destination
+               IP prefix/address to be translated.";
+          }
+
+          leaf dst-out-ip-pool {
+            type inet:ip-prefix;
+            mandatory true;
+            description
+              "IP address/prefix used for destination NAT.";
+          }
+        }
+
+        list transport-protocols {
+          if-feature "napt44 or nat64 or dst-nat";
+          key protocol-id;
+
+          description
+            "Configure the transport protocols to be handled by
+             the translator.
+
+             TCP and UDP are supported by default.";
+
+          leaf protocol-id {
+            type uint8;
+            mandatory true;
+            description
+              "Upper-layer protocol associated with this mapping.
+
+               Values are taken from the IANA protocol registry:
+               https://www.iana.org/assignments/protocol-numbers/
+               protocol-numbers.xhtml
+
+               For example, this field contains 6 (TCP) for a TCP
+               mapping or 17 (UDP) for a UDP mapping.";
+          }
+
+          leaf protocol-name {
+            type string;
+            description
+              "The name of the Upper-layer protocol associated
+               with this mapping.
+
+               Values are taken from the IANA protocol registry:
+               https://www.iana.org/assignments/protocol-numbers/
+               protocol-numbers.xhtml
+
+               For example, TCP, UDP, DCCP, and SCTP.";
+          }
+        }
+
+        leaf subscriber-mask-v6 {
+          type uint8 {
+            range "0 .. 128";
+          }
+
+          description
+            "The subscriber mask is an integer that indicates
+             the length of significant bits to be applied on
+             the source IPv6 address (internal side) to
+             unambiguously identify a user device (e.g., CPE).
+
+             Subscriber mask is a system-wide configuration
+             parameter that is used to enforce generic
+             per-subscriber policies (e.g., port-quota).
+
+             The enforcement of these generic policies does not
+             require the configuration of every subscriber's
+             prefix.
+
+             Example: suppose the 2001:db8:100:100::/56 prefix
+             is assigned to a NAT64 serviced CPE. Suppose also
+             that 2001:db8:100:100::1 is the IPv6 address used
+             by the client that resides in that CPE. When the
+             NAT64 receives a packet from this client,
+             it applies the subscriber-mask-v6 (e.g., 56) on
+             the source IPv6 address to compute the associated
+             prefix for this client (2001:db8:100:100::/56).
+             Then, the NAT64 enforces policies based on that
+             prefix (2001:db8:100:100::/56), not on the exact
+             source IPv6 address.";
+        }
+
+        list subscriber-match {
+          if-feature "basic-nat44 or napt44 or dst-nat";
+          key match-id;
+
+          description
+            "IP prefix match.
+             A subscriber is identified by a subnet.";
+
+          leaf match-id {
+            type uint32;
+            description
+              "An identifier of the subscriber match.";
+          }
+
+          leaf subnet {
+            type inet:ip-prefix;
+            mandatory true;
+            description
+              "The IP address subnets that match
+               should be translated. E.g., all addresses
+               that belong to the 192.0.2.0/24 prefix must
+               be processed by the NAT.";
+          }
+        }
+
+        leaf address-allocation-type {
+          type enumeration {
+            enum "arbitrary"  {
+              if-feature "basic-nat44 or napt44 or nat64";
+              description
+                "Arbitrary pooling behavior means that the NAT
+                 instance may create the new port mapping using any
+                 address in the pool that has a free port for the
+                 protocol concerned.";
+            }
+
+            enum "roundrobin"  {
+              if-feature "basic-nat44 or napt44 or nat64";
+              description
+                "Round robin allocation.";
+            }
+
+            enum "paired"  {
+              if-feature "napt44 or nat64";
+              description
+                "Paired address pooling informs the NAT
+                 that all the flows from an internal IP
+                 address must be assigned the same external
+                 address. This is the recommended behavior for
+                 NAPT/NAT64.";
+              reference
+                "RFC 4787: Network Address Translation (NAT)
+                           Behavioral Requirements for Unicast UDP";
+            }
+          }
+          description
+            "Specifies how external IP addresses are allocated.";
+        }
+
+        leaf port-allocation-type {
+          if-feature "napt44 or nat64";
+          type enumeration {
+            enum "random"  {
+              description
+                "Port randomization is enabled. A NAT port allocation
+                 scheme should make it hard for attackers to guess
+                 port numbers";
+              reference
+                "REQ-15 of RFC 6888";
+            }
+
+            enum "port-preservation"  {
+              description
+                "Indicates whether the NAT should preserve the internal
+                 port number.";
+            }
+
+            enum "port-parity-preservation"  {
+              description
+                "Indicates whether the NAT should preserve the port
+                 parity of the internal port number.";
+            }
+
+            enum "port-range-allocation"  {
+              description
+                "Indicates whether the NAT assigns a range of ports
+                 for an internal host. This scheme allows to minimize
+                 log volume.";
+              reference
+                "REQ-14 of RFC 6888";
+            }
+          }
+            description
+              "Indicates the type of port allocation.";
+        }
+
+        leaf mapping-type {
+          if-feature "napt44 or nat64";
+          type enumeration {
+            enum "eim"  {
+              description
+                "endpoint-independent-mapping.";
+              reference
+                "Section 4 of RFC 4787.";
+            }
+
+            enum "adm"  {
+              description
+                "address-dependent-mapping.";
+              reference
+                "Section 4 of RFC 4787.";
+            }
+
+            enum "edm"  {
+              description
+                "address-and-port-dependent-mapping.";
+              reference
+                "Section 4 of RFC 4787.";
+            }
+          }
+          description
+            "Indicates the type of a NAT mapping.";
+        }
+
+        leaf filtering-type {
+          if-feature "napt44 or nat64";
+          type enumeration {
+            enum "eif"  {
+              description
+                "endpoint-independent-filtering.";
+              reference
+                "Section 5 of RFC 4787.";
+            }
+
+            enum "adf"  {
+              description
+                "address-dependent-filtering.";
+              reference
+                "Section 5 of RFC 4787.";
+            }
+            enum "edf"  {
+              description
+                "address-and-port-dependent-filtering";
+              reference
+                "Section 5 of RFC 4787.";
+            }
+          }
+            description
+              "Indicates the type of a NAT filtering.";
+        }
+
+        leaf fragment-behavior {
+          if-feature "napt44 or nat64";
+          type enumeration {
+            enum "drop-all"  {
+              description
+                "All received fragments are dropped.";
+            }
+
+            enum "in-order"  {
+              description
+                "Translate fragments only if they are received
+                 in order.";
+            }
+
+            enum "out-of-order"  {
+              description
+                "Translate a fragment even if it is received out
+                 of order.
+
+                 This behavior is recommended.";
+              reference
+                "REQ-14 of RFC 4787";
+             }
+           }
+           description
+             "The fragment behavior instructs the NAT about the
+              behavior to follow to translate fragments received
+              on the external interface of the NAT.";
+          }
+
+        list port-quota {
+          if-feature "napt44 or nat64";
+          key quota-type;
+          description
+            "Configures a port quota to be assigned per subscriber.
+             It corresponds to the maximum number of ports to be
+             used by a subscriber.";
+          leaf port-limit {
+            type uint16;
+            description
+              "Configures a port quota to be assigned per subscriber.
+               It corresponds to the maximum number of ports to be
+               used by a subscriber.";
+            reference
+              "REQ-4 of RFC 6888.";
+          }
+
+          leaf quota-type {
+              type uint8;
+              description
+                "Indicates whether the port quota applies to
+                 all protocols (0) or to a specific protocol.";
+          }
+        }
+
+        container port-set {
+
+          when "../port-allocation-type = 'port-range-allocation'";
+
+          if-feature "napt44 or nat64";
+          description
+            "Manages port-set assignments.";
+
+          leaf port-set-size {
+            type uint16;
+            // TODO(HC2VPP-328)
+            // mandatory true;
+            description
+              "Indicates the size of assigned port sets.";
+          }
+
+          leaf port-set-timeout {
+            type uint32;
+            units "seconds";
+            description
+              "inactivity timeout for port sets.";
+          }
+        }
+
+        container timers {
+          if-feature "napt44 or nat64";
+          description
+            "Configure values of various timeouts.";
+
+            leaf udp-timeout {
+              type uint32;
+              units "seconds";
+              default 300;
+              description
+                "UDP inactivity timeout. That is the time a mapping
+                 will stay active without packets traversing the NAT.";
+              reference
+                "RFC 4787: Network Address Translation (NAT)
+                           Behavioral Requirements for Unicast UDP";
+            }
+
+            leaf tcp-idle-timeout {
+              type uint32;
+              units "seconds";
+              default 7440;
+              description
+                "TCP Idle timeout should be 2 hours and 4 minutes.";
+              reference
+                "RFC 5382: NAT Behavioral Requirements for TCP";
+            }
+
+            leaf tcp-trans-open-timeout {
+              type uint32;
+              units "seconds";
+              default 240;
+              description
+                "The value of the transitory open connection
+                 idle-timeout.
+
+                 A NAT should provide different configurable
+                 parameters for configuring the open and
+                 closing idle timeouts.
+
+                 To accommodate deployments that consider
+                 a partially open timeout of 4 minutes as being
+                 excessive from a security standpoint, a NAT may
+                 allow the configured timeout to be less than
+                 4 minutes.
+
+                 However, a minimum default transitory connection
+                 idle-timeout of 4 minutes is recommended.";
+              reference
+                "Section 2.1 of RFC 7857.";
+            }
+
+            leaf tcp-trans-close-timeout {
+              type uint32;
+              units "seconds";
+              default 240;
+              description
+                "The value of the transitory close connection
+                idle-timeout.
+
+                A NAT should provide different configurable
+                parameters for configuring the open and
+                closing idle timeouts.";
+              reference
+                "Section 2.1 of RFC 7857.";
+            }
+
+            leaf tcp-in-syn-timeout {
+              type uint32;
+              units "seconds";
+              default 6;
+              description
+                "A NAT must not respond to an unsolicited
+                inbound SYN packet for at least 6 seconds
+                after the packet is received.  If during
+                this interval the NAT receives and translates
+                an outbound SYN for the connection the NAT
+                must silently drop the original unsolicited
+                inbound SYN packet.";
+             reference
+                "RFC 5382 NAT Behavioral Requirements for TCP";
+            }
+
+            leaf fragment-min-timeout {
+              when "../../fragment-behavior='out-of-order'";
+              type uint32;
+              units "seconds";
+              default 2;
+              description
+                "As long as the NAT has available resources,
+                the NAT allows the fragments to arrive
+                over fragment-min-timeout interval.
+                The default value is inspired from RFC6146.";
+            }
+
+            leaf icmp-timeout {
+              type uint32;
+              units "seconds";
+              default 60;
+              description
+                "An ICMP Query session timer must not expire
+                 in less than 60 seconds. It is recommended
+                 that the ICMP Query session timer be made
+                 configurable";
+              reference
+                "RFC 5508: NAT Behavioral Requirements for ICMP";
+            }
+
+            list per-port-timeout {
+              key port-number;
+              description
+                "Some NATs are configurable with short timeouts
+                 for some ports, e.g., as 10 seconds on
+                 port 53 (DNS) and 123 (NTP) and longer timeouts
+                 on other ports.";
+
+              leaf port-number {
+                type inet:port-number;
+                description
+                  "A port number.";
+              }
+
+              leaf timeout {
+                type uint32;
+                units "seconds";
+                mandatory true;
+                description
+                  "Timeout for this port number";
+              }
+            }
+
+            leaf hold-down-timeout {
+              type uint32;
+              units "seconds";
+              default 120;
+              description
+                "Hold down timer.
+
+                 Ports in the hold down pool are not reassigned until
+                 hold-down-timeout expires.
+
+                 The length of time and the maximum number of ports in
+                 this state must be configurable by the administrator.
+
+                 This is necessary in order to prevent collisions
+                 between old and new mappings and sessions. It ensures
+                 that all established sessions are broken instead of
+                 redirected to a different peer.";
+              reference
+                "REQ#8 of RFC 6888.";
+            }
+
+            leaf hold-down-max {
+              type uint32;
+              description
+                "Maximum ports in the Hold down timer pool.
+
+                 Ports in the hold down pool are not reassigned
+                 until hold-down-timeout expires.
+
+                 The length of time and the maximum
+                 number of ports in this state must be
+                 configurable by the administrator.
+                 This is necessary in order
+                 to prevent collisions between old
+                 and new mappings and sessions. It ensures
+                 that all established sessions are broken
+                 instead of redirected to a different peer.";
+              reference
+                "REQ#8 of RFC 6888.";
+            }
+          }
+
+          leaf fragments-limit{
+            when "../fragment-behavior='out-of-order'";
+            type uint32;
+            description
+              "Limits the number of out of order fragments that can
+               be handled.";
+            reference
+              "Section 11 of RFC 4787.";
+          }
+
+          list algs {
+            key name;
+            description
+              "ALG-related features.";
+
+            leaf name {
+              type string;
+              description
+                "The name of the ALG.";
+            }
+
+            leaf transport-protocol {
+              type uint32;
+              description
+                "The transport protocol used by the ALG
+                 (e.g., TCP, UDP).";
+            }
+            container dst-transport-port {
+              uses port-number;
+              description
+                "The destination port number(s) used by the ALG.
+                 For example,
+                   - 21 for the FTP ALG
+                   - 53 for the DNS ALG.";
+            }
+
+            container src-transport-port {
+              uses port-number;
+              description
+                "The source port number(s) used by the ALG.";
+            }
+
+            leaf status {
+              type boolean;
+              description
+                "Enable/disable the ALG.";
+            }
+          }
+
+          leaf all-algs-enable {
+            type boolean;
+            description
+             "Enable/disable all ALGs.
+
+              When specified, this parameter overrides the one
+              that may be indicated, eventually, by the 'status'
+              of an individual ALG.";
+          }
+
+          container notify-pool-usage {
+            if-feature "basic-nat44 or napt44 or nat64";
+            description
+              "Notification of pool usage when certain criteria
+               are met.";
+
+            leaf pool-id {
+              type uint32;
+              description
+                "Pool-ID for which the notification criteria
+                 is defined";
+            }
+
+            leaf high-threshold {
+              type percent;
+              description
+                "Notification must be generated when the defined high
+                 threshold is reached.
+
+                 For example, if a notification is required when the
+                 pool utilization reaches 90%, this configuration
+                 parameter must be set to 90.
+
+                 0% indicates that no high threshold is enabled.";
+            }
+
+            leaf low-threshold {
+              type percent;
+              must ". >= ../high-threshold" {
+                error-message
+                  "The upper port number must be greater than or
+                   equal to lower port number.";
+              }
+              description
+                "Notification must be generated when the defined low
+                 threshold is reached.
+
+                 For example, if a notification is required when the
+                 pool utilization reaches below 10%, this
+                 configuration parameter must be set to 10";
+            }
+
+            leaf notify-interval {
+              type uint32 {
+                 range "1 .. 3600";
+              }
+              units "seconds";
+              default '20';
+              description
+                "Minimum number of seconds between successive
+                 notifications for this pool.";
+
+              reference
+                "RFC 7659: Definitions of Managed Objects for
+                           Network Address Translators (NATs)";
+            }
+          }
+
+          container external-realm {
+            description
+              "Identifies the external realm of the NAT instance.";
+
+            choice realm-type {
+              description
+                "Can be an interface, VRF instance, etc.";
+
+              case interface {
+                description
+                  "External interface.";
+
+                leaf external-interface {
+                  type if:interface-ref;
+                  description
+                    "Name of the external interface.";
+                }
+              }
+            }
+          }
+        }
+
+        container mapping-limits {
+          if-feature "napt44 or nat64";
+          description
+            "Information about the configuration parameters that
+             limits the mappings based upon various criteria.";
+
+          leaf limit-subscribers {
+            type uint32;
+            description
+              "Maximum number of subscribers that can be serviced
+               by a NAT instance.
+
+               A subscriber is identified by a given prefix.";
+             reference
+               "RFC 7659: Definitions of Managed Objects for
+                          Network Address Translators (NATs)";
+          }
+
+          leaf limit-address-mappings {
+            type uint32;
+            description
+              "Maximum number of address mappings that can be
+               handled by a NAT instance.
+
+               When this limit is reached, packets that would
+               normally trigger translation, will be dropped.";
+             reference
+               "RFC 7659: Definitions of Managed Objects
+                          for Network Address Translators
+                          (NATs)";
+          }
+
+          leaf limit-port-mappings {
+            type uint32;
+            description
+              "Maximum number of port mappings that can be handled
+               by a NAT instance.
+
+               When this limit is reached, packets that would
+               normally trigger translation, will be dropped.";
+             reference
+               "RFC 7659: Definitions of Managed Objects for
+                          Network Address Translators (NATs)";
+          }
+
+          list limit-per-protocol {
+            if-feature "napt44 or nat64 or dst-nat";
+            key protocol-id;
+
+            description
+              "Configure limits per transport protocol";
+
+            leaf protocol-id {
+              type uint8;
+              mandatory true;
+              description
+                "Upper-layer protocol associated with this mapping.
+
+                 Values are taken from the IANA protocol registry:
+                 https://www.iana.org/assignments/protocol-numbers/
+                 protocol-numbers.xhtml
+
+                 For example, this field contains 6 (TCP) for a TCP
+                 mapping or 17 (UDP) for a UDP mapping.";
+            }
+
+            leaf limit {
+              type uint32;
+              description
+                "Maximum number of protocol-specific NAT mappings
+                 per instance.";
+            }
+          }
+        }
+
+        container connection-limits {
+          if-feature "basic-nat44 or napt44 or nat64";
+          description
+            "Information about the configuration parameters that
+             rate limit the translation based upon various criteria.";
+          leaf limit-per-subscriber {
+            type uint32;
+            units "bits/second";
+            description
+              "Rate-limit the number of new mappings and sessions
+               per subscriber.";
+           }
+
+          leaf limit-per-instance {
+            type uint32;
+            units "bits/second";
+            description
+              "Rate-limit the number of new mappings and sessions
+               per instance.";
+          }
+
+          list limit-per-protocol {
+            if-feature "napt44 or nat64";
+            key protocol-id;
+            description
+              "Configure limits per transport protocol";
+
+            leaf protocol-id {
+              type uint8;
+              mandatory true;
+              description
+                "Upper-layer protocol associated with this mapping.
+
+                 Values are taken from the IANA protocol registry:
+                 https://www.iana.org/assignments/protocol-numbers/
+                 protocol-numbers.xhtml
+
+                 For example, this field contains 6 (TCP) for a TCP
+                 mapping or 17 (UDP) for a UDP mapping.";
+            }
+
+            leaf limit {
+              type uint32;
+              description
+                "Rate-limit the number of protocol-specific mappings
+                 and sessions per instance.";
+            }
+          }
+        }
+
+        container notification-limits {
+          description "Sets notification limits.";
+
+        leaf notify-interval {
+            if-feature "basic-nat44 or napt44 or nat64";
+            type uint32 {
+                 range "1 .. 3600";
+            }
+            units "seconds";
+            default '10';
+            description
+                "Minimum number of seconds between successive
+                 notifications for this NAT instance.";
+            reference
+              "RFC 7659: Definitions of Managed Objects
+                         for Network Address Translators (NATs)";
+        }
+
+        leaf notify-addresses-usage {
+            if-feature "basic-nat44 or napt44 or nat64";
+            type percent;
+            description
+              "Notification of address mappings usage over
+               the whole NAT instance.
+
+               Notification must be generated when the defined
+               threshold is reached.
+
+               For example, if a notification is required when
+               the address mappings utilization reaches 90%,
+               this configuration parameter must be set
+               to 90.";
+         }
+
+        leaf notify-ports-usage {
+            if-feature "napt44 or nat64";
+            type percent;
+            description
+              "Notification of port mappings usage over the
+               whole NAT instance.
+
+               Notification must be generated when the defined
+               threshold is reached.
+
+               For example, if a notification is required when
+               the port mappings utilization reaches 90%, this
+               configuration parameter must be set to 90.";
+         }
+
+        leaf notify-subscribers-limit {
+            if-feature "basic-nat44 or napt44 or nat64";
+            type uint32;
+            description
+              "Notification of active subscribers per NAT
+               instance.
+
+               Notification must be generated when the defined
+               threshold is reached.";
+         }
+        }
+
+        container mapping-table {
+          if-feature "basic-nat44 or napt44 " +
+               "or nat64 or clat or dst-nat";
+          description
+            "NAT mapping table. Applicable for functions which maintain
+             static and/or dynamic mappings, such as NAT44, Destination
+             NAT, NAT64, or CLAT.";
+
+          list mapping-entry {
+            key "index";
+            description "NAT mapping entry.";
+            uses mapping-entry;
+          }
+        }
+
+        container statistics {
+          config false;
+
+          description
+            "Statistics related to the NAT instance.";
+
+          leaf discontinuity-time {
+            type yang:date-and-time;
+            mandatory true;
+            description
+              "The time on the most recent occasion at which the NAT
+               instance suffered a discontinuity.  This must be
+               initialized when the NAT instance is configured
+               or rebooted.";
+          }
+
+          container traffic-statistics {
+            description
+              "Generic traffic statistics.";
+
+            leaf sent-packets {
+              type yang:zero-based-counter64;
+              description
+                "Number of packets sent.";
+            }
+
+            leaf sent-bytes {
+              type yang:zero-based-counter64;
+              units 'bytes';
+              description
+                "Counter for sent traffic in bytes.";
+            }
+
+            leaf rcvd-packets {
+              type yang:zero-based-counter64;
+              description
+                "Number of received packets.";
+            }
+
+            leaf rcvd-bytes {
+              type yang:zero-based-counter64;
+              units 'bytes';
+              description
+                "Counter for received traffic in bytes.";
+            }
+
+            leaf dropped-packets {
+              type yang:zero-based-counter64;
+              description
+                "Number of dropped packets.";
+            }
+
+            leaf dropped-bytes {
+              type yang:zero-based-counter64;
+              units 'bytes';
+              description
+                "Counter for dropped traffic in bytes.";
+            }
+
+            leaf dropped-fragments {
+              if-feature "napt44 or nat64";
+              type yang:zero-based-counter64;
+              description
+                "Number of dropped fragments on the external realm.";
+            }
+
+            leaf dropped-address-limit-packets {
+              if-feature "basic-nat44 or napt44 or nat64";
+              type yang:zero-based-counter64;
+              description
+                "Number of dropped packets because an address limit
+                  is reached.";
+            }
+
+            leaf dropped-address-limit-bytes {
+              if-feature "basic-nat44 or napt44 or nat64";
+              type yang:zero-based-counter64;
+              units 'bytes';
+              description
+                "Counter of dropped packets because an address limit
+                  is reached, in bytes.";
+            }
+
+            leaf dropped-address-packets {
+              if-feature "basic-nat44 or napt44 or nat64";
+              type yang:zero-based-counter64;
+              description
+                "Number of dropped packets because no address is
+                 available for allocation.";
+            }
+
+            leaf dropped-address-bytes {
+              if-feature "basic-nat44 or napt44 or nat64";
+              type yang:zero-based-counter64;
+              units 'bytes';
+              description
+                "Counter of dropped packets because no address is
+                 available for allocation, in bytes.";
+            }
+
+            leaf dropped-port-limit-packets {
+              if-feature "napt44 or nat64";
+              type yang:zero-based-counter64;
+              description
+                "Number of dropped packets because a port limit
+                 is reached.";
+            }
+
+            leaf dropped-port-limit-bytes {
+              if-feature "napt44 or nat64";
+              type yang:zero-based-counter64;
+              units 'bytes';
+              description
+                "Counter of dropped packets because a port limit
+                 is reached, in bytes.";
+            }
+
+            leaf dropped-port-packets {
+              if-feature "napt44 or nat64";
+              type yang:zero-based-counter64;
+              description
+                "Number of dropped packets because no port is
+                 available for allocation.";
+            }
+
+            leaf dropped-port-bytes {
+              if-feature "napt44 or nat64";
+              type yang:zero-based-counter64;
+              units 'bytes';
+              description
+                "Counter of dropped packets because no port is
+                 available for allocation, in bytes.";
+            }
+
+            leaf dropped-subscriber-limit-packets {
+              if-feature "basic-nat44 or napt44 or nat64";
+              type yang:zero-based-counter64;
+              description
+                "Number of dropped packets because the subscriber
+                 limit per instance is reached.";
+            }
+
+            leaf dropped-subscriber-limit-bytes {
+              if-feature "basic-nat44 or napt44 or nat64";
+              type yang:zero-based-counter64;
+              units 'bytes';
+              description
+                "Counter of dropped packets because the subscriber
+                  limit per instance is reached, in bytes.";
+            }
+          }
+
+          container mappings-statistics {
+            description
+              "Mappings statistics.";
+
+            leaf total-active-subscribers {
+              if-feature "basic-nat44 or napt44 or nat64";
+              type yang:gauge32;
+              description
+                "Total number of active subscribers (that is,
+                 subscribers for which the NAT maintains active
+                 mappings.
+
+                 A subscriber is identified by a subnet,
+                 subscriber-mask, etc.";
+            }
+            leaf total-address-mappings {
+              if-feature "basic-nat44 or napt44 " +
+               "or nat64 or clat or dst-nat";
+              type yang:gauge32;
+              description
+                "Total number of address mappings present at a given
+                 time. It includes both static and dynamic mappings.";
+              reference
+                "Section 3.3.8 of RFC 7659";
+            }
+
+            leaf total-port-mappings {
+              if-feature "napt44 or nat64";
+              type yang:gauge32;
+              description
+                "Total number of NAT port mappings present at
+                 a given time. It includes both static and dynamic
+                 mappings.";
+              reference
+                "Section 3.3.9 of RFC 7659";
+            }
+
+            list total-per-protocol {
+              if-feature "napt44 or nat64";
+              key protocol-id;
+              description
+                "Total mappings for each enabled/supported protocol.";
+
+              leaf protocol-id {
+                type uint8;
+                mandatory true;
+                description
+                  "Upper-layer protocol associated with this mapping.
+                   For example, this field contains 6 (TCP) for a TCP
+                   mapping or 17 (UDP) for a UDP mapping.";
+              }
+
+              leaf total {
+                type yang:gauge32;
+                description
+                  "Total number of a protocol-specific mappings present
+                   at a given time. The protocol is identified by
+                   protocol-id.";
+              }
+            }
+          }
+
+          container pools-stats {
+            if-feature "basic-nat44 or napt44 or nat64";
+            description
+              "Statistics related to address/prefix pools
+               usage";
+
+            leaf addresses-allocated {
+              type yang:gauge32;
+              description
+                "Number of all allocated addresses.";
+            }
+
+            leaf addresses-free {
+              type yang:gauge32;
+              description
+                "Number of unallocated addresses of all pools at
+                 a given time. The sum of unallocated and allocated
+                 addresses is the total number of addresses of
+                 the pools.";
+            }
+
+            container ports-stats {
+              if-feature "napt44 or nat64";
+
+              description
+                "Statistics related to port numbers usage.";
+
+              leaf ports-allocated {
+                type yang:gauge32;
+                description
+                  "Number of allocated ports from all pools.";
+              }
+
+              leaf ports-free {
+                type yang:gauge32;
+                description
+                  "Number of unallocated addresses from all pools.";
+              }
+            }
+
+            list per-pool-stats {
+              if-feature "basic-nat44 or napt44 or nat64";
+              key "pool-id";
+              description
+                "Statistics related to address/prefix pool usage";
+
+              leaf pool-id {
+                type uint32;
+                description
+                  "Unique Identifier that represents a pool of
+                   addresses/prefixes.";
+              }
+
+              leaf discontinuity-time {
+                type yang:date-and-time;
+                mandatory true;
+                description
+                  "The time on the most recent occasion at which this
+                   pool counters suffered a discontinuity.  This must
+                   be initialized when the address pool is
+                   configured.";
+              }
+
+              container pool-stats {
+                description
+                  "Statistics related to address/prefix pool usage";
+
+                leaf addresses-allocated {
+                  type yang:gauge32;
+                  description
+                    "Number of allocated addresses from this pool.";
+                }
+
+                leaf addresses-free {
+                  type yang:gauge32;
+                  description
+                    "Number of unallocated addresses in this pool.";
+                }
+              }
+
+              container port-stats {
+                if-feature "napt44 or nat64";
+                description
+                  "Statistics related to port numbers usage.";
+
+                leaf ports-allocated {
+                  type yang:gauge32;
+                  description
+                    "Number of allocated ports from this pool.";
+                }
+
+                leaf ports-free {
+                  type yang:gauge32;
+                  description
+                    "Number of unallocated addresses from this pool.";
+                }
+              }
+            }
+          }
+        }
+      }
+    }
+  }
+
+  /*
+   * Notifications
+   */
+
+  notification nat-pool-event {
+    if-feature "basic-nat44 or napt44 or nat64";
+    description
+      "Notifications must be generated when the defined high/low
+       threshold is reached. Related configuration parameters
+       must be provided to trigger the notifications.";
+
+    leaf id {
+      type leafref {
+        path "/nat/instances/instance/id";
+      }
+      mandatory true;
+      description
+        "NAT instance Identifier.";
+    }
+
+    leaf policy-id {
+      type leafref {
+        path "/nat/instances/instance/policy/id";
+      }
+
+      description
+        "Policy Identifier.";
+    }
+
+    leaf pool-id {
+      type leafref {
+        path "/nat/instances/instance/policy/" +
+             "external-ip-address-pool/pool-id";
+      }
+      mandatory true;
+      description
+        "Pool Identifier.";
+    }
+
+    leaf notify-pool-threshold {
+      type percent;
+      mandatory true;
+      description
+        "A threshold (high-threshold or low-threshold) has
+         been fired.";
+    }
+  }
+
+  notification nat-instance-event {
+    if-feature "basic-nat44 or napt44 or nat64";
+    description
+      "Notifications must be generated when notify-addresses-usage
+       and/or notify-ports-usage threshold are reached.";
+
+    leaf id {
+      type leafref {
+        path "/nat/instances/instance/id";
+      }
+      mandatory true;
+      description
+        "NAT instance Identifier.";
+    }
+
+    leaf notify-subscribers-threshold {
+      type uint32;
+      description
+        "The notify-subscribers-limit threshold has been fired.";
+    }
+
+    leaf notify-addresses-threshold {
+      type percent;
+      description
+        "The notify-addresses-usage threshold has been fired.";
+    }
+
+    leaf notify-ports-threshold {
+      type percent;
+      description
+        "The notify-ports-usage threshold has been fired.";
+    }
+  }
+}