diff options
Diffstat (limited to 'vpp-classifier/api/src/main')
3 files changed, 5 insertions, 508 deletions
diff --git a/vpp-classifier/api/src/main/yang/ietf-access-control-list.yang b/vpp-classifier/api/src/main/yang/ietf-access-control-list.yang deleted file mode 100644 index 3083ee2a0..000000000 --- a/vpp-classifier/api/src/main/yang/ietf-access-control-list.yang +++ /dev/null @@ -1,208 +0,0 @@ -module ietf-access-control-list { - yang-version 1.1; - namespace "urn:ietf:params:xml:ns:yang:ietf-access-control-list"; - prefix acl; - import ietf-yang-types { - prefix yang; - } - import ietf-packet-fields { - prefix packet-fields; - } - organization "IETF NETMOD (NETCONF Data Modeling Language) - Working Group"; - contact - "WG Web: http://tools.ietf.org/wg/netmod/ - WG List: netmod@ietf.org - WG Chair: Juergen Schoenwaelder - j.schoenwaelder@jacobs-university.de - WG Chair: Tom Nadeau - tnadeau@lucidvision.com - Editor: Dean Bogdanovic - ivandean@gmail.com - Editor: Kiran Agrahara Sreenivasa - kkoushik@cisco.com - Editor: Lisa Huang - lyihuang16@gmail.com - Editor: Dana Blair - dblair@cisco.com"; - description - "This YANG module defines a component that describing the - configuration of Access Control Lists (ACLs). - Copyright (c) 2015 IETF Trust and the persons identified as - the document authors. All rights reserved. - Redistribution and use in source and binary forms, with or - without modification, is permitted pursuant to, and subject - to the license terms contained in, the Simplified BSD - License set forth in Section 4.c of the IETF Trust's Legal - Provisions Relating to IETF Documents - (http://trustee.ietf.org/license-info). - This version of this YANG module is part of RFC XXXX; see - the RFC itself for full legal notices."; - revision 2016-07-08 { - description - "Base model for Network Access Control List (ACL)."; - reference - "RFC XXXX: Network Access Control List (ACL) - YANG Data Model"; - } - identity acl-base { - description - "Base Access Control List type for all Access Control List type - identifiers."; - } - identity ipv4-acl { - base acl:acl-base; - description - "ACL that primarily matches on fields from the IPv4 header - (e.g. IPv4 destination address) and layer 4 headers (e.g. TCP - destination port). An acl of type ipv4-acl does not contain - matches on fields in the ethernet header or the IPv6 header."; - } - identity ipv6-acl { - base acl:acl-base; - description - "ACL that primarily matches on fields from the IPv6 header - (e.g. IPv6 destination address) and layer 4 headers (e.g. TCP - destination port). An acl of type ipv6-acl does not contain - matches on fields in the ethernet header or the IPv4 header."; - } - identity eth-acl { - base acl:acl-base; - description - "ACL that primarily matches on fields in the ethernet header, - like 10/100/1000baseT or WiFi Access Control List. An acl of - type eth-acl does not contain matches on fields in the IPv4 - header, IPv6 header or layer 4 headers."; - } - typedef acl-type { - type identityref { - base acl:acl-base; - } - description - "This type is used to refer to an Access Control List - (ACL) type"; - } - typedef access-control-list-ref { - type leafref { - path "/access-lists/acl/acl-name"; - } - description - "This type is used by data models that need to reference an - Access Control List"; - } - container access-lists { - description - "This is a top level container for Access Control Lists. - It can have one or more Access Control Lists."; - list acl { - key "acl-type acl-name"; - description - "An Access Control List(ACL) is an ordered list of - Access List Entries (ACE). Each Access Control Entry has a - list of match criteria and a list of actions. - Since there are several kinds of Access Control Lists - implemented with different attributes for - different vendors, this - model accommodates customizing Access Control Lists for - each kind and for each vendor."; - leaf acl-name { - type string; - description - "The name of access-list. A device MAY restrict the length - and value of this name, possibly space and special - characters are not allowed."; - } - leaf acl-type { - type acl-type; - description - "Type of access control list. Indicates the primary intended - type of match criteria (e.g. ethernet, IPv4, IPv6, mixed, etc) - used in the list instance."; - } - container acl-oper-data { - config false; - description - "Overall Access Control List operational data"; - } - container access-list-entries { - description - "The access-list-entries container contains - a list of access-list-entries(ACE)."; - list ace { - key "rule-name"; - ordered-by user; - description - "List of access list entries(ACE)"; - leaf rule-name { - type string; - description - "A unique name identifying this Access List - Entry(ACE)."; - } - container matches { - description - "Definitions for match criteria for this Access List - Entry."; - choice ace-type { - description - "Type of access list entry."; - case ace-ip { - description "IP Access List Entry."; - choice ace-ip-version { - description - "IP version used in this Access List Entry."; - case ace-ipv4 { - uses packet-fields:acl-ipv4-header-fields; - } - case ace-ipv6 { - uses packet-fields:acl-ipv6-header-fields; - } - } - uses packet-fields:acl-ip-header-fields; - } - case ace-eth { - description - "Ethernet Access List entry."; - uses packet-fields:acl-eth-header-fields; - } - } - } - container actions { - description - "Definitions of action criteria for this Access List - Entry."; - choice packet-handling { - default "deny"; - description - "Packet handling action."; - case deny { - leaf deny { - type empty; - description - "Deny action."; - } - } - case permit { - leaf permit { - type empty; - description - "Permit action."; - } - } - } - } - container ace-oper-data { - config false; - description - "Operational data for this Access List Entry."; - leaf match-counter { - type yang:counter64; - description - "Number of matches for this Access List Entry"; - } - } - } - } - } - } -} diff --git a/vpp-classifier/api/src/main/yang/ietf-packet-fields.yang b/vpp-classifier/api/src/main/yang/ietf-packet-fields.yang deleted file mode 100644 index 0b1ce5cdd..000000000 --- a/vpp-classifier/api/src/main/yang/ietf-packet-fields.yang +++ /dev/null @@ -1,180 +0,0 @@ -module ietf-packet-fields { - yang-version 1.1; - namespace "urn:ietf:params:xml:ns:yang:ietf-packet-fields"; - prefix packet-fields; - import ietf-inet-types { - prefix inet; - } - import ietf-yang-types { - prefix yang; - } - organization "IETF NETMOD (NETCONF Data Modeling Language) Working - Group"; - contact - "WG Web: http://tools.ietf.org/wg/netmod/ - WG List: netmod@ietf.org - WG Chair: Juergen Schoenwaelder - j.schoenwaelder@jacobs-university.de - WG Chair: Tom Nadeau - tnadeau@lucidvision.com - Editor: Dean Bogdanovic - deanb@juniper.net - Editor: Kiran Agrahara Sreenivasa - kkoushik@cisco.com - Editor: Lisa Huang - lyihuang16@gmail.com - Editor: Dana Blair - dblair@cisco.com"; - description - "This YANG module defines groupings that are used by - ietf-access-control-list YANG module. Their usage is not - limited to ietf-access-control-list and can be - used anywhere as applicable. - Copyright (c) 2015 IETF Trust and the persons identified as - the document authors. All rights reserved. - Redistribution and use in source and binary forms, with or - without modification, is permitted pursuant to, and subject - to the license terms contained in, the Simplified BSD - License set forth in Section 4.c of the IETF Trust's Legal - Provisions Relating to IETF Documents - (http://trustee.ietf.org/license-info). - This version of this YANG module is part of RFC XXXX; see - the RFC itself for full legal notices."; - revision 2016-07-08 { - description - "Initial version of packet fields used by - ietf-access-control-list"; - reference - "RFC XXXX: Network Access Control List (ACL) - YANG Data Model"; - } - grouping acl-transport-header-fields { - description - "Transport header fields"; - container source-port-range { - presence "Enables setting source port range"; - description - "Inclusive range representing source ports to be used. - When only lower-port is present, it represents a single port."; - leaf lower-port { - type inet:port-number; - mandatory true; - description - "Lower boundary for port."; - } - leaf upper-port { - type inet:port-number; - must ". >= ../lower-port" { - error-message - "The upper-port must be greater than or equal to lower-port"; - } - description - "Upper boundary for port . If existing, the upper port - must be greater or equal to lower-port."; - } - } - container destination-port-range { - presence "Enables setting destination port range"; - description - "Inclusive range representing destination ports to be used. When - only lower-port is present, it represents a single port."; - leaf lower-port { - type inet:port-number; - mandatory true; - description - "Lower boundary for port."; - } - leaf upper-port { - type inet:port-number; - must ". >= ../lower-port" { - error-message - "The upper-port must be greater than or equal to lower-port"; - } - - description - "Upper boundary for port. If existing, the upper port must - be greater or equal to lower-port"; - } - } - } - grouping acl-ip-header-fields { - description - "IP header fields common to ipv4 and ipv6"; - leaf dscp { - type inet:dscp; - description - "Value of dscp."; - } - leaf protocol { - type uint8; - description - "Internet Protocol number."; - } - uses acl-transport-header-fields; - } - grouping acl-ipv4-header-fields { - description - "Fields in IPv4 header."; - leaf destination-ipv4-network { - type inet:ipv4-prefix; - description - "Destination IPv4 address prefix."; - } - leaf source-ipv4-network { - type inet:ipv4-prefix; - description - "Source IPv4 address prefix."; - } - } - grouping acl-ipv6-header-fields { - description - "Fields in IPv6 header"; - leaf destination-ipv6-network { - type inet:ipv6-prefix; - description - "Destination IPv6 address prefix."; - } - leaf source-ipv6-network { - type inet:ipv6-prefix; - description - "Source IPv6 address prefix."; - } - leaf flow-label { - type inet:ipv6-flow-label; - description - "IPv6 Flow label."; - } - reference - "RFC 4291: IP Version 6 Addressing Architecture - RFC 4007: IPv6 Scoped Address Architecture - RFC 5952: A Recommendation for IPv6 Address Text Representation"; - } - grouping acl-eth-header-fields { - description - "Fields in Ethernet header."; - leaf destination-mac-address { - type yang:mac-address; - description - "Destination IEEE 802 MAC address."; - } - leaf destination-mac-address-mask { - type yang:mac-address; - description - "Destination IEEE 802 MAC address mask."; - } - leaf source-mac-address { - type yang:mac-address; - description - "Source IEEE 802 MAC address."; - } - leaf source-mac-address-mask { - type yang:mac-address; - description - "Source IEEE 802 MAC address mask."; - } - reference - "IEEE 802: IEEE Standard for Local and Metropolitan Area - Networks: Overview and Architecture."; - } - -}
\ No newline at end of file diff --git a/vpp-classifier/api/src/main/yang/vpp-classifier-acl.yang b/vpp-classifier/api/src/main/yang/vpp-classifier-acl.yang index f817dad81..6dc028e16 100644 --- a/vpp-classifier/api/src/main/yang/vpp-classifier-acl.yang +++ b/vpp-classifier/api/src/main/yang/vpp-classifier-acl.yang @@ -3,13 +3,14 @@ module vpp-classifier-acl { namespace "urn:opendaylight:params:xml:ns:yang:vpp:classifier:acl"; prefix "vpp-classifier-acl"; - revision "2017-03-15" { + revision "2017-05-03" { description - "Initial revision of vpp-classifier-acl model."; + "Removed support for ietf based acls."; } - import ietf-access-control-list { - prefix "acl"; + revision "2017-03-15" { + description + "Initial revision of vpp-classifier-acl model."; } import vpp-classifier { @@ -20,16 +21,6 @@ module vpp-classifier-acl { prefix "ext"; } - import ietf-packet-fields { - prefix packet-fields; - } - - identity mixed-acl { - base acl:acl-base; - description - "ACL that can match on any of L2/L3/L4 fields."; - } - typedef interface-mode { type enumeration { enum "l2"; @@ -64,79 +55,6 @@ module vpp-classifier-acl { } } - grouping ietf-acl-base-attributes { - description - "Provides limited support for ietf-acl model."; - - container access-lists { - description - "Defines references to ietf-acl lists. - ACLs are translated into classify tables and sessions when assigned to interface. - - In case of L2 interfaces, acls are translated into a chain of classify tables and assigned as L2 table. - In case of L3 interfaces, acls are translated into ip4 and ip6 chains (eth only rules go to both chains, - rest - depending on ip-version). - User ordering is preserved in both cases. - - Assignment update/delete removes all created tables and sessions and repeats process described above. - Update/delete of ACL lists referenced here is not permitted (assignment needs to be removed first). - - Read is supported only for acls that were created and assigned by Honeycomb agent - (corresponding metadata is present). - - Extensions: - - mixing ACEs of different type in one list is permited - - mixing L2/L3/L4 rules in one ACE is permited - - Limitations (due to vpp limitations): - - egress rules are currently ignored (HONEYCOMB-234) - - L4 rules support is limited (every <src,dst> port pair from provided ranges is translated to single classify - session; which can very slow or even crash vpp if ranges are big, see HONEYCOMB-260) - - ace-ip-version needs to be provided for all aces (consequence of posibility to mix ACEs of different types, - and vpp classfier api limitation: common header fields for IP4/IP6 have different offsets) - - L2 rules on L3 interfaces are applied only to IP traffic (vpp classfier limitation) - - vlan tags are supported only for sub-interfaces defined as exact-match"; - - list acl { - key "type name"; - ordered-by user; - - leaf type { - type acl:acl-type; - } - - leaf name { - type acl:access-control-list-ref; - } - } - - leaf default-action { - type enumeration { - enum "deny"; - enum "permit"; - } - default "deny"; - description - "Default action applied to packet that does not match any of rules defined in assigned ACLs. - It is translated to single classify table and applied at the end of assigned chains."; - } - - leaf mode { - type interface-mode; - default l3; - description - "The way ACLs are translated depends on the interface mode. - In case of L2 interfaces (bridge/interconnection) - classify tables are assigned as l2_table using input_acl_set_interface (ether type matching is automatically - added in case of L3 rules). - In case of L3 interfaces, classify tables are assigned as ip4/ip6 tables. - - It is the user responsibility to choose mode that matches target interface. - "; - } - } - } - grouping vpp-acl-attributes { container acl { container ingress { @@ -146,38 +64,5 @@ module vpp-classifier-acl { uses vpp-classifier-acl:acl-base-attributes; } } - - container ietf-acl { - container ingress { - uses vpp-classifier-acl:ietf-acl-base-attributes; - } - container egress { - uses vpp-classifier-acl:ietf-acl-base-attributes; - } - } - } - - augment /acl:access-lists/acl:acl/acl:access-list-entries/acl:ace/acl:matches/acl:ace-type { - ext:augment-identifier "vpp-classfier-acl-type-augmentation"; - case ace-ip-and-eth { - description - "Access List entry that can define both ip and eth rules."; - container ace-ip-and-eth-nodes { - - choice ace-ip-version { - description - "IP version used in this Access List Entry."; - mandatory true; - case ace-ipv4 { - uses packet-fields:acl-ipv4-header-fields; - } - case ace-ipv6 { - uses packet-fields:acl-ipv6-header-fields; - } - } - uses packet-fields:acl-ip-header-fields; - uses packet-fields:acl-eth-header-fields; - } - } } }
\ No newline at end of file |