diff options
Diffstat (limited to 'v3po/api/src/main/yang/vpp-vlan.yang')
| -rw-r--r-- | v3po/api/src/main/yang/vpp-vlan.yang | 443 |
1 files changed, 0 insertions, 443 deletions
diff --git a/v3po/api/src/main/yang/vpp-vlan.yang b/v3po/api/src/main/yang/vpp-vlan.yang deleted file mode 100644 index cd3d320ee..000000000 --- a/v3po/api/src/main/yang/vpp-vlan.yang +++ /dev/null @@ -1,443 +0,0 @@ -module vpp-vlan { - yang-version 1; - namespace "urn:opendaylight:params:xml:ns:yang:vpp:vlan"; - prefix "vpp-vlan"; - - revision "2016-12-14" { - description - "This revision adds the following new features: - - ingress/egress ACLs support"; - } - - revision "2015-05-27" { - description - "Initial revision of vlan model for VPP. - Reuses some concepts from draft-wilton-netmod-intf-vlan-yang-02 model."; - } - - import ietf-interfaces { - prefix "if"; - } - import ietf-inet-types { - prefix inet; - } - import ietf-yang-types { - prefix "yang"; - } - import yang-ext { - prefix "ext"; - } - import dot1q-types { - prefix dot1q; - } - import v3po { - prefix v3po; - } - import vpp-acl { - prefix vpp-acl; - } - - typedef sub-interface-status { - type enumeration { - enum "up"; - enum "down"; - } - } - - // todo add 802dot1ad support to dot1q-types.yang - /* - * Defines the supported IEEE 802.1Q types that can be used for - * VLAN tag matching. - */ - identity vlan-type { - description "Base identity from which all VLAN types - are derived from"; - } - - identity 802dot1q { - base vlan-type; - description - "An 802.1Q VLAN type"; - } - - identity 802dot1ad { - base vlan-type; - description - "An 802.1ad VLAN type"; - } - - typedef vlan-type { - type identityref { - base "vlan-type"; - } - description "Identifies a specific VLAN type"; - } - - grouping match-attributes { - choice match-type { - mandatory true; - description "Provides a choice of how the frames may be matched"; - - case default { - description "Default match"; - leaf default { - type empty; - description - "Default match. Matches all traffic not matched to any - other peer sub-interface by a more specific - encapsulation."; - } // leaf default - } // case default - - case untagged { - description "Match untagged Ethernet frames only"; - leaf untagged { - type empty; - description - "Untagged match. Matches all untagged traffic."; - } // leaf untagged - } // case untagged - - case vlan-tagged { - container vlan-tagged { - description "Matches VLAN tagged frames. Vlan tags need to be specified to use this match type"; - - leaf match-exact-tags { - type boolean; - default true; - description - "If set, indicates that all 802.1Q VLAN tags in the - Ethernet frame header must be explicitly matched, i.e. - the EtherType following the matched tags must not be a - 802.1Q tag EtherType. If unset then extra 802.1Q VLAN - tags are allowed."; - } - } // container vlan-tagged - } // case vlan-tagged - } - } - - // TODO VPP does not allow to change subinterface nor delete it (except for tag-rewrite operation) - grouping sub-interface-base-attributes { - leaf vlan-type { - type vlan-type; - default 802dot1q; - } - - container tags { - list tag { - key "index"; - max-elements 2; - - description "The VLAN tags to use by locally sourced traffic"; - - leaf index { - type uint8 { - range "0..1"; - } - - /* - * Only allow a push of an inner tag if an outer tag is also - * being pushed. - */ - must "index != 0 or - count(../../push-tags[index = 0]/index) > 0" { - error-message "An inner tag can only be pushed if an outer - tag is also specified"; - description "Only allow a push of an inner tag if an outer - tag is also being pushed"; - } - description "The index into the tag stack"; - } - - uses dot1q:dot1q-tag-or-any; - - } - } - - container match { - description - "The match used to classify frames to this interface"; - uses match-attributes; - } - - container l2 { - uses v3po:l2-base-attributes; - container rewrite { - uses tag-rewrite; - } - } - - container acl { - container ingress { - uses vpp-acl:acl-base-attributes; - } - container egress { - uses vpp-acl:acl-base-attributes; - } - } - - container ietf-acl { - container ingress { - uses vpp-acl:ietf-acl-base-attributes; - } - container egress { - uses vpp-acl:ietf-acl-base-attributes; - } - } - } - - grouping sub-interface-config-attributes { - leaf enabled { - type boolean; - default "false"; - description - "Contains the configured, desired state of the sub-interface. - To enable sub-interface, the super inerface needs to be enabled"; - } - } - - grouping sub-interface-operational-attributes { - leaf admin-status { - type sub-interface-status; - mandatory true; - } - leaf oper-status { - type sub-interface-status; - mandatory true; - } - leaf if-index { - type int32 { - range "1..2147483647"; - } - mandatory true; - } - leaf phys-address { - type yang:phys-address; - description - "The sub-interface's Media Access Control (MAC) address."; - } - leaf speed { - type yang:gauge64; - units "bits/second"; - } - } - - /* - * Only symetrical rewrite is supported - */ - grouping tag-rewrite { - description "Flexible rewrite"; - - leaf vlan-type { // todo rename to push_dot1q, mandatory(?) with default true - type vlan-type; - default 802dot1q; - } - - leaf pop-tags { - type uint8 { - range 1..2; - } - description "The number of tags to pop (or translate if used in - conjunction with push-tags)"; - } - - list push-tags { - key "index"; - max-elements 2; - description "The number of tags to push (or translate if used - in conjunction with pop-tags)"; - /* - * Server should order by increasing index. - */ - leaf index { - type uint8 { - range 0..1; - } - - /* - * Only allow a push of an inner tag if an outer tag is also - * being pushed. - */ - must "index != 0 or - count(../../push-tags[index = 0]/index) > 0" { - error-message "An inner tag can only be pushed if an outer - tag is also specified"; - description "Only allow a push of an inner tag if an outer - tag is also being pushed"; - } - } - - uses dot1q:dot1q-tag; - } - } - - grouping sub-interface-ip4-attributes { - container ipv4 { - // TODO: add currently unsupported: - // enabled, forwarding, mtu, address/origin(config false), neighbor/origin(config false) - - // TODO: reuse groupings once ietf-ip provides them - - description - "Parameters for the IPv4 address family (based on ietf-ip rev. 2014-06-16)"; - - list address { - key "ip"; - description - "The list of configured IPv4 addresses on the interface."; - leaf ip { - type inet:ipv4-address-no-zone; - description - "The IPv4 address on the interface."; - } - - choice subnet { - mandatory true; - description - "The subnet can be specified as a prefix-length, or, - if the server supports non-contiguous netmasks, as - a netmask."; - leaf prefix-length { - type uint8 { - range "0..32"; - } - description - "The length of the subnet prefix."; - } - leaf netmask { - type yang:dotted-quad; - description - "The subnet specified as a netmask (contiguous)"; - } - } // choice subnet - } // list address - - list neighbor { - key "ip"; - description - "A list of mappings from IPv4 addresses to - link-layer addresses. - - Entries in this list are used as static entries in the - ARP Cache."; - reference - "RFC 826: An Ethernet Address Resolution Protocol"; - - leaf ip { - type inet:ipv4-address-no-zone; - description - "The IPv4 address of the neighbor node."; - } - - leaf link-layer-address { - type yang:phys-address; - mandatory true; - description - "The link-layer address of the neighbor node."; - } - } // list neighbor - } - } - - grouping sub-interface-ip6-attributes { - container ipv6 { - // TODO: add currently unsupported: - // enabled, forwarding, mtu, neighbor, dup-addr-detect-transmits, autoconf, - // address(config false): origin, status - // neighbor(config false): origin, is-router, state - - // TODO: reuse groupings once ietf-ip provides them - - description - "Parameters for the IPv6 address family (based on ietf-ip rev. 2014-06-16)"; - - list address { - key "ip"; - description - "The list of configured IPv6 addresses on the interface."; - leaf ip { - type inet:ipv6-address-no-zone; - description - "The IPv6 address on the interface."; - } - - leaf prefix-length { - type uint8 { - range "0..128"; - } - mandatory true; - description - "The length of the subnet prefix."; - } - } // list address - - list neighbor { - key "ip"; - description - "A list of mappings from IPv6 addresses to - link-layer addresses. - - Entries in this list are used as static entries in the - Neighbor Cache."; - reference - "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)"; - - leaf ip { - type inet:ipv6-address-no-zone; - description - "The IPv6 address of the neighbor node."; - } - - leaf link-layer-address { - type yang:phys-address; - mandatory true; - description - "The link-layer address of the neighbor node."; - } - } // list neighbor - } - } - - augment /if:interfaces/if:interface { - ext:augment-identifier "subinterface-augmentation"; - - container sub-interfaces { - description "L2 vlan subinterfaces"; - - - list sub-interface { - key "identifier"; - leaf identifier { - type uint32; - } - - uses sub-interface-base-attributes; - uses sub-interface-config-attributes; - uses sub-interface-ip4-attributes; - uses sub-interface-ip6-attributes; - } - } - } - - augment /if:interfaces-state/if:interface { - ext:augment-identifier "subinterface-state-augmentation"; - - container sub-interfaces { - description "L2 vlan subinterfaces"; - - list sub-interface { - key "identifier"; - leaf identifier { - type uint32; - } - - uses sub-interface-base-attributes; - uses sub-interface-operational-attributes; - uses sub-interface-ip4-attributes; - uses sub-interface-ip6-attributes; - } - } - } - -} |