diff options
Diffstat (limited to 'dpdk/Makefile')
| -rw-r--r-- | dpdk/Makefile | 453 |
1 files changed, 453 insertions, 0 deletions
diff --git a/dpdk/Makefile b/dpdk/Makefile new file mode 100644 index 00000000..179e3565 --- /dev/null +++ b/dpdk/Makefile @@ -0,0 +1,453 @@ +# Copyright (c) 2015 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# Scripts require non-POSIX parts of bash +SHELL := /bin/bash + +DPDK_BUILD_DIR ?= $(CURDIR)/_build +DPDK_INSTALL_DIR ?= $(CURDIR)/_install +DPDK_PKTMBUF_HEADROOM ?= 128 +DPDK_DOWNLOAD_DIR ?= $(HOME)/Downloads +DPDK_DEBUG ?= n +DPDK_MLX4_PMD ?= n +DPDK_MLX5_PMD ?= n + +B := $(DPDK_BUILD_DIR) +I := $(DPDK_INSTALL_DIR) +DPDK_VERSION ?= 17.08 +PKG_SUFFIX ?= vpp2 +DPDK_BASE_URL ?= http://fast.dpdk.org/rel +DPDK_TARBALL := dpdk-$(DPDK_VERSION).tar.xz +DPDK_TAR_URL := $(DPDK_BASE_URL)/$(DPDK_TARBALL) +DPDK_17.05_TARBALL_MD5_CKSUM := 0a68c31cd6a6cabeed0a4331073e4c05 +DPDK_17.08_TARBALL_MD5_CKSUM := 0641f59ea8ea98afefa7cfa2699f6241 +DPDK_SOURCE := $(B)/dpdk-$(DPDK_VERSION) +MACHINE=$(shell uname -m) + +ISA_L_CRYPTO_LIB := n + +IPSEC_MB_VER ?= 0.46 +ISA_L_CRYPTO_VER := 2.18.0 + +ifeq ($(MACHINE),$(filter $(MACHINE),x86_64)) + AESNI ?= y +# DPDK pre 17.08 depends on ISA-L Crypto library for GCM PMD + ifneq ($(firstword $(sort $(DPDK_VERSION), 17.08)), 17.08) + ISA_L_CRYPTO_LIB = y + IPSEC_MB_VER = 0.45 + $(info Building ISA-L Crypto $(ISA_L_CRYPTO_VER) library) + endif +$(info Building IPSec-MB $(IPSEC_MB_VER) library) +else + AESNI ?= N +endif + +AESNIMB_LIB_TARBALL := v$(IPSEC_MB_VER).tar.gz +AESNIMB_LIB_TARBALL_URL := http://github.com/01org/intel-ipsec-mb/archive/$(AESNIMB_LIB_TARBALL) +AESNIMB_LIB_SOURCE := $(B)/intel-ipsec-mb-$(IPSEC_MB_VER) + +ISA_L_CRYPTO_LIB_TARBALL := v$(ISA_L_CRYPTO_VER).tar.gz +ISA_L_CRYPTO_LIB_TARBALL_URL := http://github.com/01org/isa-l_crypto/archive/$(ISA_L_CRYPTO_LIB_TARBALL) +ISA_L_CRYPTO_LIB_SOURCE := $(B)/isa-l_crypto-$(ISA_L_CRYPTO_VER) +ISA_L_CRYPTO_INSTALL_DIR := $(ISA_L_CRYPTO_LIB_SOURCE)/install + +ifneq (,$(findstring clang,$(CC))) +DPDK_CC=clang +else ifneq (,$(findstring icc,$(CC))) +DPDK_CC=icc +else +DPDK_CC=gcc +endif + +############################################################################## +# Intel x86 +############################################################################## +ifeq ($(MACHINE),$(filter $(MACHINE),x86_64 i686)) +DPDK_TARGET ?= $(MACHINE)-native-linuxapp-$(DPDK_CC) +DPDK_MACHINE ?= nhm +DPDK_TUNE ?= core-avx2 + +############################################################################## +# ARM64 +############################################################################## +else ifeq ($(MACHINE),aarch64) +export CROSS="" +DPDK_TARGET ?= arm64-armv8a-linuxapp-$(DPDK_CC) +DPDK_MACHINE ?= armv8a +DPDK_TUNE ?= generic + +CPU_IMP_ARM = 0x41 +CPU_IMP_CAVIUM = 0x43 + +CPU_PART_ARM_CORTEX_A53 = 0xd03 +CPU_PART_ARM_CORTEX_A57 = 0xd07 +CPU_PART_ARM_CORTEX_A72 = 0xd08 +CPU_PART_ARM_CORTEX_A73 = 0xd09 + +CPU_PART_CAVIUM_THUNDERX = 0x0a1 +CPU_PART_CAVIUM_THUNDERX_81XX = 0x0a2 +CPU_PART_CAVIUM_THUNDERX_83XX = 0x0a3 + +MIDR_IMPLEMENTER=$(shell awk '/implementer/ {print $$4;exit}' /proc/cpuinfo) +MIDR_PARTNUM=$(shell awk '/part/ {print $$4;exit}' /proc/cpuinfo) + +ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_ARM)) +############################################################################## +# Arm Cortex +############################################################################## +CPU_PART_ARM_TUNE := $(CPU_PART_ARM_CORTEX_A53)/cortex-a53 \ + $(CPU_PART_ARM_CORTEX_A57)/cortex-a57 \ + $(CPU_PART_ARM_CORTEX_A72)/cortex-a72 \ + $(CPU_PART_ARM_CORTEX_A73)/cortex-a73 +CPU_TUNE = $(notdir $(filter $(MIDR_PARTNUM)/%,$(CPU_PART_ARM_TUNE))) +ifneq ($(CPU_TUNE),) +DPDK_TUNE = $(CPU_TUNE) +else +$(warning Unknown Arm CPU) +endif + +else ifeq ($(MIDR_IMPLEMENTER),$(CPU_IMP_CAVIUM)) +############################################################################## +# Cavium ThunderX +############################################################################## +ifneq (,$(findstring $(MIDR_PARTNUM),$(CPU_PART_CAVIUM_THUNDERX) \ + $(CPU_PART_CAVIUM_THUNDERX_81XX) $(CPU_PART_CAVIUM_THUNDERX_83XX))) +DPDK_TARGET = arm64-thunderx-linuxapp-$(DPDK_CC) +DPDK_MACHINE = thunderx +else +$(warning Unknown Cavium CPU) +endif +endif + +############################################################################## +# Unknown platform +############################################################################## +else +$(error Unknown platform) +endif + +# /proc/cpuinfo does not exist on platforms without a /proc and on some +# platforms, notably inside containers, it has no content. In those cases +# we assume there's 1 processor; we use 2*ncpu for the -j option. +# NB: GNU Make 4.2 will let us use '$(file </proc/cpuinfo)' to both test +# for file presence and content; for now this will have to do. +JOBS := $(if $(shell [ -f /proc/cpuinfo ] && head /proc/cpuinfo),\ + $(shell expr 2 '*' $$(grep -c ^processor /proc/cpuinfo)), 2) + +# compiler/linker custom arguments +DPDK_CPU_CFLAGS := -pie -fPIC +DPDK_EXTRA_LDFLAGS := -g + +ifeq ($(DPDK_DEBUG),n) +DPDK_EXTRA_CFLAGS := -g -mtune=$(DPDK_TUNE) +else +DPDK_EXTRA_CFLAGS := -g -O0 +endif + +ifeq ($(ISA_L_CRYPTO_LIB),y) +DPDK_EXTRA_CFLAGS += -I$(ISA_L_CRYPTO_INSTALL_DIR)/include -Wl,-z,muldefs +DPDK_EXTRA_LDFLAGS += -L$(I)/lib +endif +DPDK_MAKE_EXTRA_ARGS += AESNI_MULTI_BUFFER_LIB_PATH=$(AESNIMB_LIB_SOURCE) + +# assemble DPDK make arguments +DPDK_MAKE_ARGS := -C $(DPDK_SOURCE) -j $(JOBS) \ + T=$(DPDK_TARGET) \ + RTE_CONFIG_TEMPLATE=../custom-config \ + EXTRA_CFLAGS="$(DPDK_EXTRA_CFLAGS)" \ + EXTRA_LDFLAGS="$(DPDK_EXTRA_LDFLAGS)" \ + CPU_CFLAGS="$(DPDK_CPU_CFLAGS)" \ + DESTDIR=$(I) \ + $(DPDK_MAKE_EXTRA_ARGS) + +define set +@if grep -q CONFIG_$1 $@ ; \ + then sed -i -e 's/.*\(CONFIG_$1=\).*/\1$2/' $@ ; \ + else echo CONFIG_$1=$2 >> $@ ; \ +fi +endef + +all: build + +$(B)/custom-config: $(B)/.patch.ok Makefile + @echo --- generating custom config from $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) --- + @cpp -undef -ffreestanding -x assembler-with-cpp $(DPDK_SOURCE)/config/defconfig_$(DPDK_TARGET) $@ + $(call set,RTE_MACHINE,$(DPDK_MACHINE)) + @# modify options + $(call set,RTE_MAX_LCORE,256) + $(call set,RTE_PKTMBUF_HEADROOM,$(DPDK_PKTMBUF_HEADROOM)) + $(call set,RTE_LIBEAL_USE_HPET,y) + $(call set,RTE_BUILD_COMBINE_LIBS,y) + $(call set,RTE_PCI_CONFIG,y) + $(call set,RTE_PCI_EXTENDED_TAG,"on") + $(call set,RTE_PCI_MAX_READ_REQUEST_SIZE,4096) + @# enable debug init for device drivers + $(call set,RTE_LIBRTE_I40E_DEBUG_INIT,$(DPDK_DEBUG)) + $(call set,RTE_LIBRTE_IXGBE_DEBUG_INIT,$(DPDK_DEBUG)) + $(call set,RTE_LIBRTE_E1000_DEBUG_INIT,$(DPDK_DEBUG)) + $(call set,RTE_LIBRTE_VIRTIO_DEBUG_INIT,$(DPDK_DEBUG)) + $(call set,RTE_LIBRTE_VMXNET3_DEBUG_INIT,$(DPDK_DEBUG)) + $(call set,RTE_LIBRTE_PMD_BOND,y) + $(call set,RTE_LIBRTE_IP_FRAG,y) + $(call set,RTE_LIBRTE_PMD_QAT,y) + $(call set,RTE_LIBRTE_PMD_AESNI_MB,$(AESNI)) + $(call set,RTE_LIBRTE_PMD_AESNI_GCM,$(AESNI)) + $(call set,RTE_LIBRTE_MLX4_PMD,$(DPDK_MLX4_PMD)) + $(call set,RTE_LIBRTE_MLX5_PMD,$(DPDK_MLX5_PMD)) + @# not needed + $(call set,RTE_LIBRTE_PMD_TAP,n) + $(call set,RTE_LIBRTE_TIMER,n) + $(call set,RTE_LIBRTE_CFGFILE,n) + $(call set,RTE_LIBRTE_LPM,n) + $(call set,RTE_LIBRTE_ACL,n) + $(call set,RTE_LIBRTE_POWER,n) + $(call set,RTE_LIBRTE_DISTRIBUTOR,n) + $(call set,RTE_LIBRTE_PORT,n) + $(call set,RTE_LIBRTE_TABLE,n) + $(call set,RTE_LIBRTE_PIPELINE,n) + $(call set,RTE_KNI_KMOD,n) + $(call set,RTE_EAL_IGB_UIO,n) + @rm -f .config.ok + +$(CURDIR)/$(DPDK_TARBALL): + @if [ -e $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) ] ; \ + then cp $(DPDK_DOWNLOAD_DIR)/$(DPDK_TARBALL) $(CURDIR) ; \ + else curl -o $(CURDIR)/$(DPDK_TARBALL) -LO $(DPDK_TAR_URL) ; \ + fi + @rm -f $(B)/.download.ok + +$(CURDIR)/$(AESNIMB_LIB_TARBALL): + @if [ -e $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) ] ; \ + then cp $(DPDK_DOWNLOAD_DIR)/$(AESNIMB_LIB_TARBALL) $(CURDIR) ; \ + else curl -o $@ -LO $(AESNIMB_LIB_TARBALL_URL) ; \ + fi + +$(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL): + @if [ -e $(DPDK_DOWNLOAD_DIR)/$(ISA_L_CRYPTO_LIB_TARBALL) ] ; \ + then cp $(DPDK_DOWNLOAD_DIR)/$(ISA_L_CRYPTO_LIB_TARBALL) $(CURDIR) ; \ + else curl -o $@ -LO $(ISA_L_CRYPTO_LIB_TARBALL_URL) ; \ + fi + +DPDK_DOWNLOADS = $(CURDIR)/$(DPDK_TARBALL) +ifeq ($(AESNI),y) +DPDK_DOWNLOADS += $(CURDIR)/$(AESNIMB_LIB_TARBALL) +endif +ifeq ($(ISA_L_CRYPTO_LIB),y) +DPDK_DOWNLOADS += $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL) +endif + +$(B)/.download.ok: $(DPDK_DOWNLOADS) + @mkdir -p $(B) + @openssl md5 $< | cut -f 2 -d " " - > $(B)/$(DPDK_TARBALL).md5sum + @([ "$$(<$(B)/$(DPDK_TARBALL).md5sum)" = "$(DPDK_$(DPDK_VERSION)_TARBALL_MD5_CKSUM)" ] || \ + ( echo "Bad Checksum! Please remove $< and retry" && \ + rm $(B)/$(DPDK_TARBALL).md5sum && false )) + @touch $@ + +.PHONY: download +download: $(B)/.download.ok + +$(B)/.extract.ok: $(B)/.download.ok + @echo --- extracting $(DPDK_TARBALL) --- + @tar --directory $(B) --extract --file $(CURDIR)/$(DPDK_TARBALL) +ifeq ($(AESNI),y) + @echo --- extracting $(AESNIMB_LIB_TARBALL) --- + @tar --directory $(B) --extract --file $(CURDIR)/$(AESNIMB_LIB_TARBALL) +endif +ifeq ($(ISA_L_CRYPTO_LIB),y) + @echo --- extracting $(ISA_L_CRYPTO_LIB_TARBALL) --- + @tar --directory $(B) --extract --file $(CURDIR)/$(ISA_L_CRYPTO_LIB_TARBALL) +endif + @touch $@ + +.PHONY: extract +extract: $(B)/.extract.ok + +$(B)/.patch.ok: $(B)/.extract.ok +ifneq ($(wildcard $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch),) + @echo --- patching --- + @for f in $(CURDIR)/dpdk-$(DPDK_VERSION)_patches/*.patch ; do \ + echo Applying patch: $$(basename $$f) ; \ + patch -p1 -d $(DPDK_SOURCE) < $$f ; \ + done +endif + @touch $@ + +.PHONY: patch +patch: $(B)/.patch.ok + +$(B)/.config.ok: $(B)/.patch.ok $(B)/custom-config + @make $(DPDK_MAKE_ARGS) config + @touch $@ + +.PHONY: config +config: $(B)/.config.ok + +.PHONY: build-ipsec-mb +build-ipsec-mb: + mkdir -p $(I)/lib/ + # Do not build GCM stuff if we are building ISA_L + make -C $(AESNIMB_LIB_SOURCE) -j NO_GCM=$(ISA_L_CRYPTO_LIB) + cp $(AESNIMB_LIB_SOURCE)/libIPSec_MB.a $(I)/lib/ + +.PHONY: build-isal-crypto +build-isal-crypto: + mkdir -p $(I)/lib/ + cd $(ISA_L_CRYPTO_LIB_SOURCE) && ./autogen.sh && \ + ./configure --prefix=$(ISA_L_CRYPTO_INSTALL_DIR) \ + --libdir=$(ISA_L_CRYPTO_INSTALL_DIR)/lib CFLAGS='-fPIC -DPIC -O2' + make -C $(ISA_L_CRYPTO_LIB_SOURCE) -j install + cp $(ISA_L_CRYPTO_INSTALL_DIR)/lib/libisal_crypto.a $(I)/lib/ + +.PHONY: build-dpdk +build-dpdk: + @if [ ! -e $(B)/.config.ok ] ; then echo 'Please run "make config" first' && false ; fi + @make $(DPDK_MAKE_ARGS) install + +# Order matters +ifeq ($(AESNI),y) +BUILD_TARGETS += build-ipsec-mb +endif +ifeq ($(ISA_L_CRYPTO_LIB),y) +BUILD_TARGETS += build-isal-crypto +endif +BUILD_TARGETS += build-dpdk + +$(B)/.build.ok: $(BUILD_TARGETS) + @touch $@ + +.PHONY: build +build: $(B)/.build.ok + +.PHONY: install +install: $(B)/.build.ok + +.PHONY: clean +clean: + @rm -rf $(B) $(I) + +############################################################################## +# .deb packaging +############################################################################## + +DEB_ARCH=$(shell dpkg --print-architecture 2> /dev/null) +DEV_DEB=vpp-dpdk-dev_$(DPDK_VERSION)-$(PKG_SUFFIX)_$(DEB_ARCH).deb +INSTALLED_DEB_VER=$(shell dpkg-query --showformat='$${Version}' --show vpp-dpdk-dev 2> /dev/null) + +.PHONY: build-deb install-deb check-deb + +deb/debian/changelog: Makefile + @echo "vpp-dpdk ($(DPDK_VERSION)-$(PKG_SUFFIX)) unstable; urgency=low" > $@ + @echo "" >> $@ + @echo " * DPDK Release $(DPDK_VERSION)" >> $@ + @echo "" >> $@ + @echo " -- VPP Dev <vpp-dev@lists.fd.io> $(shell date -R)" >> $@ + +$(DEV_DEB): deb/debian/changelog + @cd deb && dpkg-buildpackage -b -uc -us + git clean -fdx deb + +build-deb: $(DEV_DEB) + +install-deb: +ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) + @make $(DEV_DEB) + @sudo dpkg -i $(DEV_DEB) +else + @echo "==========================================================" + @echo " Up-to-date DPDK package already installed" + @echo "==========================================================" +endif + +check-deb: +ifneq ($(INSTALLED_DEB_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) + @echo "==========================================================" + @echo " Outdated DPDK package detected:" + @echo " Installed: vpp-dpdk-dev $(INSTALLED_DEB_VER)" + @echo " Current: vpp-dpdk-dev $(DPDK_VERSION)-$(PKG_SUFFIX)" + @echo "" + @echo " Please upgrade by invoking 'make dpdk-install-dev'" + @echo " from the top level directory." + @echo "==========================================================" +endif + +############################################################################## +# .rpm packaging +############################################################################## + +RPM_ARCH=$(shell rpm --eval "%{_arch}" 2> /dev/null) +DEV_RPM=vpp-dpdk-devel-$(DPDK_VERSION)-$(PKG_SUFFIX).$(RPM_ARCH).rpm +INSTALLED_RPM_VER=$(shell rpm -q --queryformat '%{VERSION}-%{RELEASE}' vpp-dpdk-devel 2> /dev/null | grep -v "not inst") + +.PHONY: build-rpm install-rpm check-rpm + +$(DEV_RPM): Makefile rpm/vpp-dpdk.spec + @rpmbuild -bb \ + --define "_topdir $(CURDIR)/rpm" \ + --define "_version $(DPDK_VERSION)" \ + --define "_release $(PKG_SUFFIX)" \ + $(CURDIR)/rpm/vpp-dpdk.spec + mv rpm/RPMS/$(RPM_ARCH)/*.rpm . + git clean -fdx rpm + +build-rpm: $(DEV_RPM) + +install-rpm: +ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) + @$(MAKE) $(DEV_RPM) + sudo rpm -Uih $(DEV_RPM) +else + @echo "==========================================================" + @echo " Up-to-date DPDK package already installed" + @echo "==========================================================" +endif + +check-rpm: +ifneq ($(INSTALLED_RPM_VER),$(DPDK_VERSION)-$(PKG_SUFFIX)) + @echo "==========================================================" + @echo " Outdated DPDK package detected:" + @echo " Installed: vpp-dpdk-devel $(INSTALLED_RPM_VER)" + @echo " Current: vpp-dpdk-devel $(DPDK_VERSION)-$(PKG_SUFFIX)" + @echo "" + @echo " Please upgrade by invoking 'make dpdk-install-dev'" + @echo " from the top level directory." + @echo "==========================================================" +endif + +############################################################################## +# ebuild support +############################################################################## + +.PHONY: ebuild-build ebuild-install + +ebuild-build: +ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),) + @echo "==========================================================" + @echo "Building DPDK from source. Consider installing development" + @echo "package by invoking 'make dpdk-install-dev' from the" + @echo "top level directory" + @echo "==========================================================" + make config +else +ifneq ($(INSTALLED_DEB_VER),) + make check-deb +endif +ifneq ($(INSTALLED_RPM_VER),) + make check-rpm +endif +endif + +ebuild-install: +ifeq ($(INSTALLED_DEB_VER)$(INSTALLED_RPM_VER),) + make install +endif |