Age | Commit message (Collapse) | Author | Files | Lines |
|
Some build hosts can run out of memory during compilation.
This should reduce memory demand without affecting build time.
Change-Id: I11bd2884a1f8885a8a332bbbf0a63324a3079c3b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
The check for input sw_if_index against output sw_if_index is not correct
for the interface on the replication order after VXLAN tunnel because the
encap code overwrite packet sw_if_index[VLIB_RX] with that of the VXLAN
tunnel sw_if_index. The check should be done using sw_if_index[VLIB_RX]
saved in the packet context.
Change-Id: I175717221409977e80576e84dfe5362d1f6aed2f
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I9d7f8b9a0543d885ed10908b859d52a80bf89f56
Signed-off-by: John Lo <loj@cisco.com>
|
|
tapcli interfaces were creating single-packet frames.
It now calls readv until the frame is full, or
readv returns error EAGAIN.
This is usefull when a significant amount of traffic
flows through tap interfaces.
This patch also fixes a memory leak by correctly
initializing b->clone_count to zero.
Change-Id: I15e435ba76d542be2f263274e76297425cd10243
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Change-Id: I0dc5f48ade786b60b34441c30f3de5b9f373d714
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Extensible next-index and opaque unformat function scheme. Added
next-index-by-node-name and sw_if_index->opaque functions.
Allow dynamic graph arcs to be added to ip4/6-inacl.
Change-Id: Ie434335399a0708772eb82563a154df19c63b622
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
configuration parameter. This can be any combination
of nodeid, interface indices, timestamp and appdata.
This configuration is passed through packet header by
encap node to all other nodes. Rewrite buffer is resized
accordingly. Trace function modified accordingly.
* Added CLI 'show ioam summary' command to display various
configuration.
* Added CLI 'clear ioam rewrite'
Change-Id: Ide4c85f8b22561303df48519c5ea59668a300188
Signed-off-by: rangan <rangan@cisco.com>
|
|
Gerrit wouldn't merge the previous attempt, so let's just make the
pain go away...
Change-Id: Ia008d43f755b6e3a5f4c699de365d241bf361aa9
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I5cb2a319384e49a072d75f3ea05e6fb92e381c23
Signed-off-by: Nagaprabhanjan Bellari <nagp.lists@gmail.com>
|
|
- rename skels so M-x skel-<tab> gives catalog
Change-Id: Ice25a4ce4d02d09e076f0de51e8443cfab20688d
Signed-off-by: Keith Burns (alagalah) <alagalah@gmail.com>
|
|
Change-Id: I047cc41a5d0c4a6e4191ca35c505ff21236abcfa
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This allows install-dep to be run non-interactively
Change-Id: I5c3e55958ed16dd3d128bbad9f317d9f2428d41a
Signed-off-by: Ed Warnicke <eaw@cisco.com>
|
|
Do not propagate flags into cloned vlib_next_frame_t's.
vlib_next_frame_init(...) sets nf->frame_index to ~0. If it turns out
that the original flags include VLIB_FRAME_IS_ALLOCATED, the wheels
fall off. And so on.
Change-Id: I8de18653acfcc8eb20cee36f4eb5b9e82234f21b
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
classifier used to crash when packet data was not aligned.
This commit also includes:
- writer lock initialization bugfix
- CLI help was missing opaque-index
- ip_input_acl was applying the mask on buffer->data instead of packet head
On a side note, my tests failed to show any improvements
when using SSE. Further tests might be interesting to see if they
actually perform better.
Change-Id: Ic34eecd6a2226919121ffce2fe4324506deee52f
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Change-Id: I620871ca715b751d2e487f37341b7118797c9176
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ia450c9bc6d00fbd054d41a462366f826121d781d
Signed-off-by: Todd Foggoa <tfoggoa@cisco.com>
|
|
Change-Id: Iaa3da32060e78bbc505ee84a2a6393f899aa110e
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
In some cases write to new_id fails but binding is still
possible.
Change-Id: I1944eab4326a08e85e83cd5cd7379c6a4d03d98d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
* Added option to specify target platform (e.g. export PLATFORM=vpp_lite)
* Added ctags targed to (re)build ctags database
* Added cscope targed to (re)build cscope database
Change-Id: I93feb7b458abe9fbd93000f75b7be24e3865f089
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Ifc67db0575a7517ac24519894996906ea44ead67
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4aafad8a3e4c0c57eef1940fac8debfb80bbb137
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
This is 1st drop of VPP native driver for linux AF_PACKET.
New CLI:
create host-interface name <host-if-name> [hw-addr <mac-address>]
References:
- Documentation/networking/packet_mmap.txt in the Linux kernel tree
- man 7 packet
Known issues:
- attaching to linux bridge doesn't work
- it is not expected to work in multicore setup
Change-Id: I1cb1c3d305f349759e90e76e25696718b73bd73d
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
This fixes issue observed on Ubuntu 16.04 where
dynamic loader is not finding correct instance of
specific structure.
Change-Id: I618d0933c7e171b8a9b40495b36894785af7790a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
I got many warnings at the link step with gcc version 5.3.1 20160225 (Ubuntu 5.3.1-10ubuntu2):
/usr/bin/ld: Warning: size of symbol `cop_input_node' changed from 112 in vnet/cop/.libs/cop.o to 168 in vnet/cop/.libs/node1.o
/usr/bin/ld: Warning: size of symbol `ethernet_input_node' changed from 112 in vnet/.libs/interface.o to 136 in vnet/ethernet/.libs/node.o
/usr/bin/ld: Warning: size of symbol `l2output_node' changed from 112 in vnet/l2/.libs/l2_efp_filter.o to 120 in vnet/l2/.libs/l2_output.o
/usr/bin/ld: Warning: size of symbol `srp_input_node' changed from 112 in vnet/srp/.libs/format.o to 136 in vnet/srp/.libs/node.o
/usr/bin/ld: Warning: size of symbol `vxlan_encap_node' changed from 112 in vnet/vxlan/.libs/vxlan.o to 128 in vnet/vxlan/.libs/encap.o
/usr/bin/ld: Warning: size of symbol `vxlan_input_node' changed from 112 in vnet/vxlan/.libs/vxlan.o to 144 in vnet/vxlan/.libs/decap.o
...
Looking at vlib_node_registration_t, I think the reason is that
the char * next_nodes[] could be bigger where the variable is defined
in .c file.
We should mark global variables as external in header files.
Some of them can be made static.
Change-Id: Ieb6961fd08180c9a69e1d884852703f3eb23f23f
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
|
|
/usr/bin/ld: -f may not be used without -shared
collect2: error: ld returned 1 exit status
Indeed an extra "-fPIC" is given to ld, see the -Wl,-fPIC below:
gcc -pie -fPIC -pthread -march=native -DRTE_MACHINE_CPUFLAG_SSE -DRTE_MACHINE_CPUFLAG_SSE2 -DRTE_MACHINE_CPUFLAG_SSE3 -DRTE_MACHINE_CPUFLAG_SSSE3 -DRTE_MACHINE_CPUFLAG_SSE4_1 -DRTE_MACHINE_CPUFLAG_SSE4_2 -DRTE_MACHINE_CPUFLAG_AES -DRTE_MACHINE_CPUFLAG_PCLMULQDQ -DRTE_MACHINE_CPUFLAG_AVX -DRTE_COMPILE_TIME_CPUFLAGS=RTE_CPUFLAG_SSE,RTE_CPUFLAG_SSE2,RTE_CPUFLAG_SSE3,RTE_CPUFLAG_SSSE3,RTE_CPUFLAG_SSE4_1,RTE_CPUFLAG_SSE4_2,RTE_CPUFLAG_AES,RTE_CPUFLAG_PCLMULQDQ,RTE_CPUFLAG_AVX -I/home/jmg/dev/vpp/build-root/install-vpp_debug-native/dpdk/include -include /home/jmg/dev/vpp/build-root/install-vpp_debug-native/dpdk/include/rte_config.h -O3 -W -Wall -Werror -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wold-style-definition -Wpointer-arith -Wcast-align -Wnested-externs -Wcast-qual -Wformat-nonliteral -Wformat-security -Wundef -Wwrite-strings -D_GNU_SOURCE -Wl,-Map=test.map,--cref -o test commands.o test.o test_pci.o test_prefetch.o test_byteorder.o test_per_lcore.o test_atomic.o test_malloc.o test_cycles.o test_spinlock.o test_memory.o test_memzone.o test_ring.o test_ring_perf.o test_pmd_perf.o test_rwlock.o test_mempool.o test_mempool_perf.o test_mbuf.o test_logs.o test_memcpy.o test_memcpy_perf.o test_hash.o test_thash.o test_hash_perf.o test_hash_functions.o test_hash_scaling.o test_debug.o test_errno.o test_tailq.o test_string_fns.o test_cpuflags.o test_mp_secondary.o test_eal_flags.o test_eal_fs.o test_alarm.o test_interrupts.o test_version.o test_func_reentrancy.o test_cmdline.o test_cmdline_num.o test_cmdline_etheraddr.o test_cmdline_portlist.o test_cmdline_ipaddr.o test_cmdline_cirbuf.o test_cmdline_string.o test_cmdline_lib.o test_red.o test_sched.o test_meter.o test_kni.o test_common.o test_devargs.o virtual_pmd.o packet_burst_generator.o test_link_bonding.o test_link_bonding_mode4.o test_link_bonding_rssconf.o test_pmd_ring.o test_pmd_ring_perf.o test_cryptodev_perf.o test_cryptodev.o test_kvargs.o -Wl,-pie -Wl,-fPIC -Wl,--no-as-needed -Wl,-export-dynamic -L/home/jmg/dev/vpp/build-root/install-vpp_debug-native/dpdk/lib -Wl,-g -L/home/jmg/dev/vpp/build-root/install-vpp_debug-native/dpdk/lib -Wl,--whole-archive -Wl,-ldpdk -Wl,--start-group -Wl,-lrt -Wl,-lm -Wl,-ldl -Wl,--end-group -Wl,--no-whole-archive
Fixed by unsetting the flags -pie -fPIC out of LDFLAGS, these are not
options for the linker.
$ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu 5.3.1-10ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-5 --enable-shared --enable-linker-build-id --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --with-default-libstdcxx-abi=new --enable-gnu-unique-object --disable-vtable-verify --enable-libmpx --enable-plugin --with-system-zlib --disable-browser-plugin --enable-java-awt=gtk --enable-gtk-cairo --with-java-home=/usr/lib/jvm/java-1.5.0-gcj-5-amd64/jre --enable-java-home --with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-5-amd64 --with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 5.3.1 20160225 (Ubuntu 5.3.1-10ubuntu2)
Change-Id: Iffbebfbb625e8831822ec092bea88dea42f12930
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
|
|
The specification requires logging of used vring writes to only happen
when VHOST_VRING_F_LOG flag is present in VHOST_USER_SET_VRING_ADDR
message; take that into account.
Change-Id: I9bf4b9eb43a1783b39909b1a3ea1a3bdf50d91a8
Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
|
|
including vppinfra header files.
Change-Id: I961c602e0ccd2048fac633b5aeebb8c3cd0899fb
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
In case socket-mem was set to <1024 and no 1G page long hupepages were
available, the condition was evaluated in unexpected manner. In other
words use_1g == 1, and that fails later in mount().
This patch makes sure this is prevented - if there are no pages_available,
do not even try to use that pagesize.
Change-Id: I30675aa017d97b99d84d5db926e62f0acb54deb6
Signed-off-by: Stefan Kobza <skobza@cisco.com>
|
|
Fix compilation with Ubuntu 16.04/yacc:
$ yacc -V
yacc - 1.9 20140715
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu Xenial Xerus (development branch)
Release: 16.04
Codename: xenial
Change-Id: Ib1a6d7b7f9485db893465041ac6bce2a98ded2f7
Signed-off-by: Vincent JARDIN <vincent.jardin@6wind.com>
|
|
So unless I have missed something, loopback interfaces
are spawned hardware-down and never set up. This patch
uses the same process as tapcli interfaces by
mirroring sw state to hw state.
Change-Id: I94198c1c880de773daccbb63ca8d32c4c7e26a74
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
The files are installed by libtoolize:
libtoolize: copying file `m4/libtool.m4'
libtoolize: copying file `m4/ltoptions.m4'
libtoolize: copying file `m4/ltsugar.m4'
libtoolize: copying file `m4/ltversion.m4'
libtoolize: copying file `m4/lt~obsolete.m4'
No need to keep them into the repository.
Change-Id: Ic24d51f7e7680161ac8c780f34e76bc21435b3c1
Signed-off-by: Vincent JARDIN <vincent.jardin@6wind.com>
|
|
Change-Id: I756940c9c1b2bb71d47caeb08ab34a2e954ddff6
Signed-off-by: John Lo <loj@cisco.com>
|
|
Both ARP and NDP need to be called when hi->output_node_index is changed.
It does not look like a perfect solution though. Maybe an actual up-down
call would be better...
Change-Id: If2988d131e77f4fc522f34f3ffe2d5ba9c1d506c
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
|
|
Change-Id: I9b325b454ef80ffff80a0b0e23b24e3313127376
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Don't complain about unknown fib-id's unless actually trying to
use the indicated per-address-family fib.
Change-Id: Ie8c28dbf7dac9c38193a02ff15a8529d0f90d99a
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I0731357744ddcb890efaebd81aac5370449a90e3
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Seen during build:
/bin/bash: line 1: @mkdir: command not found
Remove the extra prefix '@', this line is part of a
single operation actually.
Change-Id: I5fc265ae7c2dda01c61b369803d3c30a42a91f70
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
|
|
Change-Id: I6aa662e060f7ce01a4dd80ae2498dc91a8b65a8e
Signed-off-by: Todd Foggoa (tfoggoa) <tfoggoa@cisco.com>
|
|
Change-Id: I384d7b2cdbb63b5ca904db5a11c8b8748f7197b9
Signed-off-by: rangan <rangan@cisco.com>
|
|
Change-Id: I394960c300ff7a81c4c8e05afd5a4175e66666eb
Signed-off-by: Shesha Sreenivasamurthy <shesha@cisco.com>
|
|
Change-Id: I04f53789bf1f39fdf16bc813280b24144fedd020
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
|
|
Change-Id: I59c4711fce1999b4bd23f0a0bac41aa14ca716f5
Signed-off-by: Maros Marsalek <mmarsale@cisco.com>
|
|
Change-Id: Id7ea0410d6a789000c747c36a7e50076e31dc29a
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If4fb86cfeeaf35f3ae89946b437ce5160adbce94
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I4d0d152b6f5d4ba566398fcccaa6a1f96625f864
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Note that L3 MTU for DPDK interfaces is derived from DPDK port_conf
in vnet/devices/dpdk/init.c.
Change-Id: I9633a1887347a18d05598435baceb6a62cd7b19a
Signed-off-by: John Lo <loj@cisco.com>
|
|
The VLIB_FRAME_NO_FREE_AFTER_DISPATCH flag is not preserved when cloning
next_frames, as a result VLIB_FRAME_FREE_AFTER_DISPATCH can
erroneously be set for a frame (see vlib_get_next_frame_internal())
Change-Id: Ice1d7ddcb807e1168aa0c157d9474be492d102c2
Signed-off-by: Nikhil P Rao <nikhil.rao@intel.com>
|
|
This fixes SIGILL crash observed on Penryn CPU
Change-Id: I960878d88f0f088847d4d86605ef082f6600e2c7
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: If6695e19e5a1e5471e56099e2cf31794c73f3303
Signed-off-by: John Lo <loj@cisco.com>
|
|
Change-Id: I3a0726d7645f775738253d0a47ee04d94d138c9a
Signed-off-by: Ole Troan <ot@cisco.com>
|