Age | Commit message (Collapse) | Author | Files | Lines |
|
after:
TenGigabitEthernet5/0/1-output active 107522 17375708 0 7.22e0 161.60
TenGigabitEthernet5/0/1-tx active 107522 17375708 0 6.93e1 161.60
ip4-input-no-checksum active 107522 17375708 0 2.52e1 161.60
ip4-lookup active 107522 17375708 0 3.10e1 161.60
ip4-rewrite active 107522 17375708 0 2.52e1 161.60
before
TenGigabitEthernet5/0/1-output active 433575 110995200 0 6.95e0 256.00
TenGigabitEthernet5/0/1-tx active 433575 110995200 0 7.14e1 256.00
ip4-input-no-checksum active 433575 110995200 0 2.66e1 256.00
ip4-lookup active 433575 110995200 0 3.29e1 256.00
ip4-rewrite active 433575 110995200 0 2.59e1 256.00
Change-Id: I46405bd22189f48a39f06e3443bb7e13f410b539
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Drop comes before lookup when enabled. is_first_or_last is not required when setting a feature, the anchor is added in find_config_with_features().
Don't make the PG interfaces automatically L3 enabled, this way we can have tests that check the L3 protocol disbaled behaviour.
Change-Id: Icef22a920b27ff9cec6ab2da6b05f05c532cb60f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
1 - Quad loop lookup and label imposition.
2 - optimise imposition for the 1 label case
3 - input gets TTL from header directly (no byte swap)
Change-Id: I59204c9e5d134b0df75d7afa43e360f946d1ffe7
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
allow this config to function:
set int ip address loop0 169.254.1.1/32 (the default GW address for attached hosts)
set int unnumbered af_packet0 use loop0 ('enable' IP on the host interface)
ip route add 192.168.1.1/32 via af_packet0 (where to find the host)
repeat for each host and host interface.
Inter-host communication is throught the /32 routes.
To allow this:
1 - attached host routes have the ATTACHED flag set, so the ARP code accepts then as legitimate sources
2 - unnumbered interfaces inherit the source address from the IP interface
Change-Id: Ib66c5f0e848c528f79372813adc3a0c11b50717f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
dispatch_node may be invoked from vlib main or worker threads. The call to
ELOG_DATA in dispatch_node passes the parameter &vm->elog_main. It works fine
when dispatch_node is invoked from the main thread. It does bad thing when it
is invoked from the worker thread.
While we are at it, make two additional enhancements to the same area.
1. Use ELOG_TRACK_DATA instead of ELOG_DATA to enhance g2 viewer presentation.
2. Since ELOG_DATA is in the data path, it could get very chatty. Make the call
to ELOG_TRACK_DATA conditional compile.
Change-Id: I80ca0eea10bc1e5d0d5549f9844dd9a34dbb65a2
Signed-off-by: Steven <sluong@cisco.com>
|
|
node_index memeber from the rewrite for space - this is only used for formtting
before:
ip4-rewrite * * * * 2.66e1 256.00
after:
ip4-rewrite * * * * 2.40e1 256.00
Change-Id: Ic397150727cad38811564777419ad6bd26b8a3a6
Signed-off-by: Neale Ranns <nranns@wasa-ucs-11.cisco.com>
|
|
Change-Id: I3d64ddb248478accd4d9b3124f018c9aab63a60f
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I3fa2f35056b74e479288bb956f2713f727a81c72
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I9b6ed9741fae89bdefa6f601398eb63a21155069
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Return an error if the ip6_interface_first_address decides to return NULL.
Change-Id: Iea0184382b8fbe2af81a781c3671687a1fbb5b32
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
|
|
Change-Id: I08ab1fd0abdd1db4aff11a38c9c0134b01368e11
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
When the VM is migrated, the driver sends VHOST_USER_VRING_GET_BASE
message to the device to get the vring offset. The device is
supposed to shut down the vring, and return the current vring offset.
What the code did was to shutdown the vring, initialize the vring,
and return 0 to the driver.
The fix is to first store last_avail_idx in the message and then close
the vring.
Change-Id: I432e9f50f36d89fe53a45e050edcf5e1218caf7a
Signed-off-by: Steven <sluong@cisco.com>
|
|
Change-Id: I4aa3e7e42fb81211de1aed07dc7befee87a1e18b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I03e52466fb3f909ae52b8fba601168f3eadbd972
Signed-off-by: Ole Troan <ot@cisco.com>
|
|
Change-Id: I7e8556af833ca0e00fadc96dcd2077ff1104541b
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
this enables sharing the api_helper_macros.h implementation
Change-Id: Ie3fc89f3b4b5a47fcfd4b5776db90e249c55dbc3
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Change-Id: If3dbce830684b5eab8944519424074b03cc7d703
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
and some refactoring
Change-Id: I99e3c5e782ce65cb9779ccc3a9a3151ef1429e07
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
structure definitions into two files to share code with NSH
plugin (iOAM)
Change-Id: I0192551f71678e4f814bc6a7d25200a1580f3033
Signed-off-by: Vengada <venggovi@cisco.com>
|
|
As opposed to rubbish (typically) 14 octets past the ethertype.
Also fix buffer error code setup in dpdk-input node single loop.
Change-Id: Ide7c4097d3bb91e62749ed4e1d69a7b4b90225de
Signed-off-by: Dave Barach <dbarach@cisco.com>
Signed-off-by: John Lo <loj@cisco.com>
|
|
validate interfaces - added check for hidden interfaces
interface dump - dont send hidden interfaces
set_unnumbered - test for hidden
vl_api_create_vlan_subif_t_handler, vl_api_create_subif_t_handler - fixed potential memory leak
some other minor refactors to make code clearer and shorter
Change-Id: Icce6b724336b7d1536fbd07a74bf7abe4916d2c0
Signed-off-by: Eyal Bari <ebari@cisco.com>
|
|
Hate it when that happens...
Change-Id: I725c8539d6349755e9d75ae05f2703c83ea704be
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: Iec3df234ca9f717d87787cefc76b73ed9ad42332
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
1. Fix finding sr extension header
2. Fix for assert checks for space for sr header in packet headroom
3. ioam build warnings
4. Fix for SR header removal in presence of hbh ext header
clib_memcpy with overlapping src/dst was failing
Change-Id: I8576204eb571d1d4725a4e6976e18fe61cd1cd35
Signed-off-by: shwethab <shwetha.bhandari@gmail.com>
|
|
Change-Id: I61464fd1610a9754693f31edd72f9fa1b6926511
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Coverity IDs - 163911, 163910, 163909, 163908, 163905, 163904, 163896, 161957, 161955
Change-Id: Ida822fa45c6936240f61282e2280541d7e6427b3
Signed-off-by: AkshayaNadahalli <anadahal@cisco.com>
|
|
- event-logging support for tcp and session layer
- improvements to uri test code
- builtin_server on port 1234
- use the CLOSEWAIT timer when we rx FIN in FIN_WAIT_2 state
Change-Id: Ibc445f164b2086b20323bf89c77cffd3059f570f
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dbarach@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Add doxygen documentation for DPDK crypto CLI command.
The move of DPDK to a plugin invalidated the local dir.dox. So moved
dpdk/dir.dox to dpdk/device/dir.dox to fix.
Change-Id: I229e2921c4b0cdd380021adb520cd2089a376afa
Signed-off-by: Billy McFall <bmcfall@redhat.com>
|
|
Interface can be in promiscuous mode if more than one of its sub-
interface is in L2 mode. In promiscuous mode, L3 interface need to
verify DMAC of packet to match that of the interface and drop if not.
This check was done on sub-interface only and now also added to main
interface path.
Fix incorrect MAC addresses in the flow-per-pkt plugin test, which
caused it to fail.
Fix MAC address usage in BFD tests.
Change-Id: I12a17ec05c7ab298ad10d400c90d082c97eca521
Signed-off-by: John Lo <loj@cisco.com>
Signed-off-by: Klement Sekera <ksekera@cisco.com>
|
|
Change-Id: I95113a277b94cce5ff332fcf9f57ec6f385acec0
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: I07de08ef111011694638a8ebe7a13c240714ce7e
Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
|
|
vpp_lite platform is not needed anymore as same efect can be
achieved with following startup.conf config:
plugins {
plugin dpdk_plugin.so { disable }
}
Change-Id: I690ea8ceb1c6e1fe32e01e7da54e9958019a93bf
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Id18d59c9442602633a6310b2001a95bce8b6b232
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
- builtin test echo server
- fix SYN-ACK retransmit canceling
- avoid sending spurious ACK if in LAST_ACK
- improved client dummy test app
- renamed tx fifo dequeuing and sending functions to avoid confusion
- improved RST handling
Change-Id: Ia14aad3df319540dcf6e6a4e18a9f8d423a4b83b
Signed-off-by: Florin Coras <fcoras@cisco.com>
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: If540787e2443330673ad6721094c4765c32ef59b
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: I8b7dc3bf631bd228db23679534e04b8af7ac4ec7
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
|
|
Change-Id: I6a93fdc3f669fa1892d1e1cd5a9685700d6d2683
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
Change-Id: I6d30c6a8d1a425c531e7206e46143d528980c48e
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
next-hops. UT checks for no-leftover-state now pass
Change-Id: I9e980ee117c0b6aebc6c7a0fcc153a7c0eaf0c72
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic206601413bb366e2a920daf00524e92a47287ef
Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
|
|
Change-Id: Iaa4fb2bc2230c1a99c518a37039cd91648dc19c0
Signed-off-by: Florin Coras <fcoras@cisco.com>
|
|
Clean up spurious binary API client link dependency on libvlib.so,
which managed to hide behind vlib_mains == 0 checks reached by
VLIB_xxx_FUNCTION macros.
Change-Id: I5df1f8ab07dca1944250e643ccf06e60a8462325
Signed-off-by: Dave Barach <dave@barachs.net>
|
|
neighbor entry
Change-Id: I952039e101031ee6a06e63f4c73d8eb359423e1a
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: I9ea16881caf7aee57f0daf4ac2e8b82c672f87e9
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Ic6ac7e441a7b75baa02f03c1585d1ae00903a399
Signed-off-by: Neale Ranns <nranns@cisco.com>
|
|
Change-Id: Idd28931756a53663512efe85b896eeffcc8cadcb
Signed-off-by: Gabriel Ganne <gabriel.ganne@enea.com>
|
|
Change-Id: Ie9945462d529fea6f237a521138ade76bd02e0d9
Signed-off-by: Damjan Marion <damarion@cisco.com>
|
|
Change-Id: Iead6dc6a0fe15a0b8e148e780c3aeadd0b378824
Signed-off-by: Martin <magalik@cisco.com>
|
|
Change-Id: Id7879a6a8014fe57c3515a13e7597fb0e3c906ad
Signed-off-by: Matus Fabian <matfabia@cisco.com>
|
|
Change-Id: I8b81e53ebea573b4edb17aca7e1c284f3984e399
Signed-off-by: Damjan Marion <damarion@cisco.com>
|