aboutsummaryrefslogtreecommitdiffstats
path: root/vnet
AgeCommit message (Collapse)AuthorFilesLines
2016-07-31Initial L2 LISP supportFlorin Coras15-306/+1070
This introduces support for layer 2 overlays with LISP. Similarly to L3, all tenant packets to be encapsulated are captured by an interface, but the mapping (layer binding) instead of being between an L3 VRF and a LISP VNI, it is between and an L2 bridge domain and a VNI. At a high level, this results in two important properties: 1) the source and destinations of all packets flooded in the bridge-domain are mapped via the LISP control plane and the replies are converted into data-plane tunnels tracked via a LISP specific source/dest L2 FIB 2) All packets reaching the interface and matching a source/dest L2 LISP FIB entry are L3 (IP4/6) encapsulated. This is solely a unicast feature, therefore at this time ARPs are not handled in any special way. Change-Id: I0b7badcd7c6d5166db07d4acd2cc4ae7fba3e18e Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-07-30VPP-189: Fix another batch of coverity warningsDave Barach3-3/+3
Change-Id: I2b13894cca950ddb6732714f3acc180443552b5f Signed-off-by: Dave Barach <dave@barachs.net>
2016-07-30Remove per-worker destination frame queueDamjan Marion3-12/+0
This frame queue is not part of the dpdk code anymore, so it can be removed. It will save some space in the 1st cacelineof dpdk device data struct. Change-Id: If839861961548750601400a511a609be7ae84b30 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-29LISP - fix bug in ip_prefix_normalize_ip6Andrej Kozemcak1-41/+57
- fix bug - refactoring code Change-Id: I2c330f3fbdead567b65c889cfffc2562d99b61db Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-29VPP-142 Follow up fix for shared_count of indirect adjacenciesJohn Lo2-16/+0
Clean up dead code path added in previous attempt. Change-Id: Ib95b07bfd7699496f6808da97200993e2104d796 Signed-off-by: John Lo <loj@cisco.com>
2016-07-28VPP-189 More coverity bug fixesDave Barach5-9/+14
Change-Id: I6e9290b26b1e74fc5652b689c8d5cc2972ac11d5 Signed-off-by: Dave Barach <dave@barachs.net>
2016-07-28Add IP adjacency registration functionPierre Pfister2-4/+98
Given that it is possible and easy to add dynamic IP adjacencies, it might be helpful to have an explicit call to do so. This way, additional information such as how to display the adjacency can be provided at the same time. Change-Id: I5c735ae45ed763560352f637e3462f2931dc97d9 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-07-28Edit eid table dumpAndrej Kozemcak1-8/+30
- change output from eid table - add eid filter: all - dump all eid local - dump local eid remote - dump remote eid Change-Id: Ifaaad8abf44cf70c4c22d05252e501456f1f1083 Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-28LISP - Bug fix, can`t remove static remote mappingAndrej Kozemcak3-64/+112
Fix bug, can`t remove static remote mapping, small update in LISP remote mapping API. Change-Id: Ide32485a1a0d2cf08829d544500fa2755214b8cc Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-27VPP-189 coverity warning cleanupsDave Barach1-1/+1
Change-Id: Ia4fbf4352119504e022b89d10d44a5259d94f316 Signed-off-by: Dave Barach <dave@barachs.net>
2016-07-27Vhost-User: Fix bind sockaddr lengthPierre Pfister2-12/+12
The sockaddr length argument provided to bind was wrong. This patch also adds an error message in the CLI when the vhost-user add function fails. Change-Id: Ib4466accffe49c8c3f4951ebf3a83a24529f6a5b Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-07-27VAT add_locator_set api support multiple locatorsAndrej Kozemcak1-3/+10
Change-Id: I22df3d4407bd7fdd953783f00605380a2d6fb46e Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-26VPP-214: IPSec cli/api vector ck and ik initializationMatus Fabian1-2/+2
Change-Id: I34e19d1feb350c47987b9764b642ef9baa000581 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-07-26VPP-223 General documentation updatesChris Luke1-3/+3
Per the TWS session... - Some simple treatment of the contents of pool.h - Changing some \brief commands to @brief. (will do a more complete pass at this later.) Change-Id: I050ee69c59c4b572ac295b5f86940b7f4c934cd9 Signed-off-by: Chris Luke <chrisy@flirble.org>
2016-07-26policer classifyMatus Fabian16-44/+884
JIRA: VPP-114 If the classifier finds a matching entry, it sends packet to the policer, packet should be pre-colored for color-aware policers. Change-Id: I10cb53b49907137769418f230df2cab577d0f3a0 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-07-26Fix Coverty warning in lisp_add_del_map_resolver_command_fnFlorin Coras1-2/+9
Change-Id: I074d9e026ae42aa14caedc56287816ab64968425 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-07-25VPP-142 - Follow up fix for shared_count in indirect adjacenciesJohn Lo2-4/+11
Change-Id: Ia2d0351ffd40c75cbf9611e00a7e111189ad70b5 Signed-off-by: John Lo <loj@cisco.com>
2016-07-22Add DPDK 16.07 support (rc3 based)Damjan Marion7-10/+78
DPDK vhost-user support is disabled due to significan changes in the DPDK vhost-user code which are not compatible with current VPP code. Change-Id: I3f0d28cb75f6370282ec7e33d57cbfb77e1a3ce1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-22HONEYCOMB-83: Add Gre FeatureHongjun Ni2-3/+3
PatchSet 3: use clib_memcpy for copy. PatchSet 2: use clib_memcpy() to copy IP address. PatchSet 1: Support IPv6 interface for GRE API. Change-Id: I80ee4b61df15da7fd851b682a97d5d49f89568b7 Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>
2016-07-21Add support for Chelsio T540-CR and T580-CRDamjan Marion1-0/+6
Change-Id: Ibe927027c2aea6f2d85a9c50bf462c552b63861c Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-21As interface is set to L3 mode, reset its output_node_index for l2-outputJohn Lo1-0/+7
As an interface is changed from L2 bridging/xconenct to L3 mode, reset the output_node_index for l2-output for the interface's sw_if_index. The reset needs to be done in case the sw_if_index of this interface is freed and reused for another interface type afterwards. Otherwise, the stale output node may be used by l2-output for this sw_if_index and result in undesirable behavior including the possibility of VPP crash. Change-Id: Idd91d288c7643f0a1975a6787fcc330d03a7fac7 Signed-off-by: John Lo <loj@cisco.com>
2016-07-21Improve interface naming for NICs ports sharing same PCI IDDamjan Marion3-16/+31
Change-Id: I68d708f5dd76dc7a46c3c8634aa8f18c515177e5 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-21Rename reused LISP interfacesFlorin Coras1-3/+18
Change-Id: I0efb4c488ea18504a87c845f8fe399f0333d5be2 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-07-21Fix CLI for adding LISP fwd entriesFlorin Coras3-51/+141
Change-Id: Ib707d252e624e3c1c4ac261fd3cef17b097633e5 Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-07-21l2_rw preload starts where data isPierre Pfister1-2/+2
Change-Id: I8819f78dedb02abd38ae0c404e9524ebde12191f Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-07-21tapcli: Use error counter for buffer allocation errorPierre Pfister2-1/+4
Change-Id: Ic51a0d17918de56869cfd4a371054fb380000089 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-07-21Add API calls for packet generatorPavel Kotucek3-34/+70
Added new API to: - create packet generator interface - enable packet generator per stream or all - capture into file Change-Id: I0e6c1f28069853e4b26f0dc9d282353b0b7f6512 Signed-off-by: Pavel Kotucek <pkotucek@cisco.com>
2016-07-20Add new lisp API - Show pitrAndrej Kozemcak1-0/+44
VAT API: - show_lisp_pitr CLI API: - show lisp pitr Change-Id: Ibd31cb09efc34a49b439338e9467faf7a151f2cd Signed-off-by: Andrej Kozemcak <akozemca@cisco.com>
2016-07-20L2TP: Add option for custom fib id for outgoing encapsulated packetsPierre Pfister3-7/+25
If a custom fib ID is used (different from ~0), the associated fib is used to forward outgoing encapsulated packets. Otherwise, the fib used is the same as for any packet received on the original RX interface (L2TP does not modify RX interface index). Change-Id: I4533d5f7fa432c78c937d3acdd802d0d1c92a0c7 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-07-20IP6 forward: Add ND route when next-hop is unknown link localPierre Pfister1-14/+25
Indirect routes have been recently added. When the next-hop is not known, an indirect route is automatically installed instead. But it makes no sense to add an indirect route for a link-local next-hop addresses. Instead, it may make sense to add an ND entry to the yet-to-be-met neighbor. Also corrected some indentation. Change-Id: Ia83c9cd1feafac742680745e82c6faf9f2e1e536 Signed-off-by: Pierre Pfister <ppfister@cisco.com>
2016-07-19On bonded interface admin-down, should stop all slave linksJohn Lo2-12/+18
When bonded interface is set to admin down, all slave links should also be stopped or they will continue to receive packets and then be dropped because bonded interface is down. Also remove setting bonded interface L3 packet size limit to that of slave on startup - it is not needed and can cause undesirable side effect if its value become incompatible with bonded interface MTU. Change-Id: Ibdd8acac0ca41a867131441eb26518592bb7d98a Signed-off-by: John Lo <loj@cisco.com>
2016-07-19Fix CLI to add LISP interfaceFlorin Coras1-3/+16
Change-Id: Id59a5f3dcea46679deb759a8e4af187125f33cbd Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-07-19Tap: Fix hardware address assignmentMohsin KAZMI1-24/+17
[VPP-200]: Previously, VPP set the same hardware address to tap interface as of Linux side tap interface, if neither hardware address nor 'random' keyword were given explicitly on VPP command line during tap creation or modification, which was default case. This patch makes sure to set the different hardware addresses randomly as default case. While one can set unique hardware address or similar to one at Linux side using VPP tap command line. Change-Id: Ie0a82f3706834e87426d66c6e869ec4edfefe932 Signed-off-by: Mohsin KAZMI <sykazmi@cisco.com>
2016-07-18Fix "show hardware" CLI display for bonded interface may corrupt heapJohn Lo1-1/+1
Change-Id: Ie379844047b6402884653d3fd682010a1d09d14a Signed-off-by: John Lo <loj@cisco.com>
2016-07-18Output format change from "vlan 802.1q" to "802.1q vlan", addition to VPP-111marek zavodsky2-4/+4
Change-Id: Ieac14c88e6f0d2d88da1fe47f981fa33ae6f7c23 Signed-off-by: marek zavodsky <mazavods@gmail.com>
2016-07-17Add ILA pluginPierre Pfister1-0/+2
This plugin is implementation of Identifier Locator Addressing (ILA) per IETF draft-herbert-nvo3-ila-2 Change-Id: I5d5f8fb55c490f358f628bceb5f57e7e7408e6ed Signed-off-by: Pierre Pfister <ppfister@cisco.com> Signed-off-by: Wolfgang <wolfgang.beck01@gmail.com> Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-14vhost-user: Reset virt-queue info when a vhost interface is disconnected.Steve Shin1-0/+16
When a vhost interface is disconneted, virt-queue info should be cleaned up. This will avoid any potential vpp crash due to unmmaped memory access. Change-Id: Ia20153da9eb45412bb41d76ef66ede175ea6fef1 Signed-off-by: Steve Shin <jonshin@cisco.com>
2016-07-14Show 802.1q/802.1ah details in the trace output, fixes VPP-111marek zavodsky4-16/+63
added one line to dpdk-input trace to display vlan tci when PKT_RX_VLAN_PKT flag set cleaned trace output of af_packet node. Added formatter for vlan_tci. Merged with John Lo's ethernet trace extension: Decode both dot1q and dot1ad VLAN tags in ethernet format function and show what type of vlan tag it is. dpdk-input & ethernet trace output example of ARP: 00:00:41:545481: dpdk-input TenGigabitEthernet8/0/1 rx queue 0 buffer 0x10f2e: current data 0, length 60, free-list 0, totlen-nifb 0, trace 0x1 PKT MBUF: port 4, nb_segs 1, pkt_len 60 buf_len 2176, data_len 60, ol_flags 0x1, data_off 128, phys_addr 0x70e38ac0 packet_type 0x0 Packet Offload Flags PKT_RX_VLAN_PKT (0x0001) RX packet is a 802.1q VLAN packet ID 100 ARP: 8c:60:4f:dd:ca:81 -> ff:ff:ff:ff:ff:ff vlan 802.1q id 100 request, type ethernet/IP4, address size 6/4 8c:60:4f:dd:ca:81/172.16.110.1 -> ff:ff:ff:ff:ff:ff/172.16.110.10 00:00:41:545492: ethernet-input ARP: 8c:60:4f:dd:ca:81 -> ff:ff:ff:ff:ff:ff vlan 802.1q id 100 00:00:41:545499: error-drop ethernet-input: unknown vlan Change-Id: Iae67a945fda4aa2f24032e305a24544dd182b065 Signed-off-by: marek zavodsky <mazavods@gmail.com>
2016-07-13Add API dump call for vrf/vni mapping to vpp-api-testFilip Tehlar1-1/+1
Change-Id: I7a028ce9ddf21bd3a7d4991ba1be05e5e74202d6 Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-07-12packet-generator: various fixesDamjan Marion3-32/+44
Change-Id: I8f1be9a501574ff4d5024ed0d632392708716e77 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-12policer actionMatus Fabian6-14/+215
JIRA: VPP-90 Policer allows you to specify the action to be taken on a packet: conform-action (green color) exceed-action (yellow color) violate-action (red color) Action to take on packets: drop - drops the packet transmit - transmits the packet, the packet is not altered mark-and-transmit <DSCP> - sets the DSCP value and transmits the packet Change-Id: I59c037e55e7e2a9fc9b9752e92426f3977f5587b Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-07-11Simplify API to add LISP adjacenciesFlorin Coras2-73/+45
The API to add an adjacency requires that two things be provided 1) a local and a remote eid 2) the whole remote mapping for the remote eid. Since the API to add remote mappings can be used for 2), 1) in combination with this API are enough to add an adjacency. Change-Id: Ibe7474924bc3f28b6aed19cefa78fdb812de5eac Signed-off-by: Florin Coras <fcoras@cisco.com>
2016-07-11VPP-183: IPSec transport modeMatus Fabian3-17/+112
Change-Id: I22399aa9d55db0d91da7ba6acbbf552c0d201458 Signed-off-by: Matus Fabian <matfabia@cisco.com>
2016-07-09dpdk: disable CRC strippingDamjan Marion1-1/+1
Change-Id: I7006a3068c22e18e62c84abb8cc6124695b9ca44 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-09packet-generator: fix pcap stream supportDamjan Marion2-4/+18
Change-Id: I494280964deda1d9448540cb5c6e7a8b750fff93 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-08IPv6 frag: avoid overflow while parsing extension headersYoann Desmouceaux1-0/+7
A malicious packet could advertise an extension header length bigger than the actual packet length, which would cause an overflow. Change-Id: I277123e6fde6937b0170f2b2e33846bd22848ac4 Signed-off-by: Yoann Desmouceaux <ydesmouc@cisco.com>
2016-07-08Add locator prority and weight to LISP APIFilip Tehlar1-5/+20
Change-Id: Ifa9bcd9a9c5dbda00ff8096909ccbc822445b8cb Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
2016-07-08Remove unnecessary and obsolete configure.ac directivesDamjan Marion1-2/+0
Also enable silent rules where missing Change-Id: Ia521886815c862b013f01df4cc18fd8a298aaaa1 Signed-off-by: Damjan Marion <damarion@cisco.com>
2016-07-08Add binary API for IPFIXJuraj Sloboda2-1/+5
Change-Id: I3346b18126d65b72726e977dfb11ba4c380056c0 Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>
2016-07-08Make IPFIX src port configurableJuraj Sloboda3-1/+8
Make src port configurable in flow report sample code Change-Id: Ic7d3c3de17b83821106a827fb65e79381044da7e Signed-off-by: Juraj Sloboda <jsloboda@cisco.com>