diff options
Diffstat (limited to 'tests/data_plane/vpp_lite_topo')
13 files changed, 319 insertions, 6 deletions
diff --git a/tests/data_plane/vpp_lite_topo/odl_utils.sh b/tests/data_plane/vpp_lite_topo/odl_utils.sh index f3edc28..8a2b8bc 100644 --- a/tests/data_plane/vpp_lite_topo/odl_utils.sh +++ b/tests/data_plane/vpp_lite_topo/odl_utils.sh @@ -2,7 +2,7 @@ function post_curl { echo "Sending mapping from ${2} to ODL; operation: ${1}" until [ "`curl -X POST "http://${ODL_IP}:${ODL_PORT}/restconf/operations/odl-mappingservice:${1}" \ - -H "Content-Type: application/json" --data-binary "@${ODL_CONFIG_DIR}${2}" \ + -H "Content-Type: application/json" --data-binary "@${ODL_CONFIG_DIR}/${2}" \ -u ${ODL_USER}:${ODL_PASSWD} -s -o /dev/null -w "%{http_code}"`" == "200" ] do echo "Updating failed; trying again.." diff --git a/tests/data_plane/vpp_lite_topo/test_driver/rtr_single_iface.sh b/tests/data_plane/vpp_lite_topo/test_driver/rtr_single_iface.sh index 6331ab5..f51e0af 100644 --- a/tests/data_plane/vpp_lite_topo/test_driver/rtr_single_iface.sh +++ b/tests/data_plane/vpp_lite_topo/test_driver/rtr_single_iface.sh @@ -22,7 +22,7 @@ function test_rtr_single_iface { test_result=1 - ip netns exec vpp-ns1 ping -w 15 -c 1 "${1}" + ip netns exec vpp-ns1 "${1}" -w 15 -c 1 "${2}" rc=$? rtr_single_iface_clean diff --git a/tests/data_plane/vpp_lite_topo/test_driver/two_customers_topo.sh b/tests/data_plane/vpp_lite_topo/test_driver/two_customers_topo.sh new file mode 100644 index 0000000..79349b6 --- /dev/null +++ b/tests/data_plane/vpp_lite_topo/test_driver/two_customers_topo.sh @@ -0,0 +1,54 @@ +source config.sh +source odl_utils.sh +source topologies/two_customers_topo.sh + +ODL_CONFIG_FILE1="vpp1_customer1.json" +ODL_CONFIG_FILE2="vpp2_customer1.json" +ODL_CONFIG_FILE3="vpp1_customer2.json" +ODL_CONFIG_FILE4="vpp2_customer2.json" + +if [ "$1" == "clean" ] ; then + two_customers_topo_clean + exit 0 +fi + +if [[ $(id -u) != 0 ]]; then + echo "Error: run this as a root." + exit 1 +fi + +function test_eid_virtualization { + two_customers_topo_clean + sleep 1 + two_customers_topo_setup + + # init to test failed + test_result=1 + + #read -p "press any key to continue .." -n1 + + ip netns exec vpp1-cus1-ns "${1}" -w 20 -c 1 "${2}" + rc=$? + if [ $rc -ne 0 ] ; then + echo "Error: customer 1 did not reveive any response!" + fi + + #read -p "press any key to continue .." -n1 + + ip netns exec vpp1-cus2-ns "${1}" -w 20 -c 1 "${2}" + rc=$? + if [ $rc -ne 0 ] ; then + echo "Error: customer 2 did not reveive any response!" + fi + +# two_customers_topo_clean + + if [ $rc -ne 0 ] ; then + echo "Test failed!"; + else + echo "Test passed." + test_result=0 + fi + + exit $test_result +} diff --git a/tests/data_plane/vpp_lite_topo/test_eid_virtualization_4o4.sh b/tests/data_plane/vpp_lite_topo/test_eid_virtualization_4o4.sh new file mode 100755 index 0000000..2038fd2 --- /dev/null +++ b/tests/data_plane/vpp_lite_topo/test_eid_virtualization_4o4.sh @@ -0,0 +1,22 @@ +#!/usr/bin/env bash + +# Test EID virualization (4over4) +# +# This test configures two LISP XTRs with two customers. Both customers +# have two client nodes (EID) as depict here: +# +# eid1 ______ _______ eid2 +# customer1 -| | | |- customer1 +# | xTR |----| xTR | +# customer2 -|_____| | |_____|- customer2 +# eid3 | eid4 +# ODL +# +# In this scenario both eid1 and eid3 are equal. + +VPP_LITE_CONF=`pwd`"/../configs/vpp_lite_config/eid_virt/4o4" +ODL_CONFIG_DIR=`pwd`"/../configs/odl/eid_virt/4o4" + +source test_driver/two_customers_topo.sh + +test_eid_virtualization ping "6.0.4.4" diff --git a/tests/data_plane/vpp_lite_topo/test_eid_virtualization_4o6.sh b/tests/data_plane/vpp_lite_topo/test_eid_virtualization_4o6.sh new file mode 100755 index 0000000..391da92 --- /dev/null +++ b/tests/data_plane/vpp_lite_topo/test_eid_virtualization_4o6.sh @@ -0,0 +1,22 @@ +#!/usr/bin/env bash + +# Test EID virualization (4over6) +# +# This test configures two LISP XTRs with two customers. Both customers +# have two client nodes (EID) as depict here: +# +# eid1 ______ _______ eid2 +# customer1 -| | | |- customer1 +# | xTR |----| xTR | +# customer2 -|_____| | |_____|- customer2 +# eid3 | eid4 +# ODL +# +# In this scenario both eid1 and eid3 are equal. + +VPP_LITE_CONF=`pwd`"/../configs/vpp_lite_config/eid_virt/4o6" +ODL_CONFIG_DIR=`pwd`"/../configs/odl/eid_virt/4o6" + +source test_driver/two_customers_topo.sh + +test_eid_virtualization ping "6.0.4.4" diff --git a/tests/data_plane/vpp_lite_topo/test_eid_virtualization_6o4.sh b/tests/data_plane/vpp_lite_topo/test_eid_virtualization_6o4.sh new file mode 100755 index 0000000..5d7f975 --- /dev/null +++ b/tests/data_plane/vpp_lite_topo/test_eid_virtualization_6o4.sh @@ -0,0 +1,22 @@ +#!/usr/bin/env bash + +# Test EID virualization (6over4) +# +# This test configures two LISP XTRs with two customers. Both customers +# have two client nodes (EID) as depict here: +# +# eid1 ______ _______ eid2 +# customer1 -| | | |- customer1 +# | xTR |----| xTR | +# customer2 -|_____| | |_____|- customer2 +# eid3 | eid4 +# ODL +# +# In this scenario both eid1 and eid3 are equal. + +VPP_LITE_CONF=`pwd`"/../configs/vpp_lite_config/eid_virt/6o4" +ODL_CONFIG_DIR=`pwd`"/../configs/odl/eid_virt/6o4" + +source test_driver/two_customers_topo.sh + +test_eid_virtualization ping6 "6:0:4::4" diff --git a/tests/data_plane/vpp_lite_topo/test_eid_virtualization_6o6.sh b/tests/data_plane/vpp_lite_topo/test_eid_virtualization_6o6.sh new file mode 100755 index 0000000..2b6d463 --- /dev/null +++ b/tests/data_plane/vpp_lite_topo/test_eid_virtualization_6o6.sh @@ -0,0 +1,22 @@ +#!/usr/bin/env bash + +# Test EID virualization (6over6) +# +# This test configures two LISP XTRs with two customers. Both customers +# have two client nodes (EID) as depict here: +# +# eid1 ______ _______ eid2 +# customer1 -| | | |- customer1 +# | xTR |----| xTR | +# customer2 -|_____| | |_____|- customer2 +# eid3 | eid4 +# ODL +# +# In this scenario both eid1 and eid3 are equal. + +VPP_LITE_CONF=`pwd`"/../configs/vpp_lite_config/eid_virt/6o6" +ODL_CONFIG_DIR=`pwd`"/../configs/odl/eid_virt/6o6" + +source test_driver/two_customers_topo.sh + +test_eid_virtualization ping6 "6:0:4::4" diff --git a/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_4o4.sh b/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_4o4.sh index f2e1a60..465a014 100755 --- a/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_4o4.sh +++ b/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_4o4.sh @@ -13,8 +13,8 @@ # VPP_LITE_CONF=`pwd`"/../configs/vpp_lite_config/rtr_single_iface/4o4" -ODL_CONFIG_DIR=`pwd`"/../configs/odl/rtr_single_iface/4o4/" +ODL_CONFIG_DIR=`pwd`"/../configs/odl/rtr_single_iface/4o4" source test_driver/rtr_single_iface.sh -test_rtr_single_iface "6.0.4.4" +test_rtr_single_iface ping "6.0.4.4" diff --git a/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_4o6.sh b/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_4o6.sh index 59c75d1..fe1e3da 100755 --- a/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_4o6.sh +++ b/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_4o6.sh @@ -13,7 +13,7 @@ # VPP_LITE_CONF=`pwd`"/../configs/vpp_lite_config/rtr_single_iface/4o6/" -ODL_CONFIG_DIR=`pwd`"/../configs/odl/rtr_single_iface/4o6/" +ODL_CONFIG_DIR=`pwd`"/../configs/odl/rtr_single_iface/4o6" source test_driver/rtr_single_iface.sh diff --git a/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_6o4.sh b/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_6o4.sh new file mode 100755 index 0000000..ced8729 --- /dev/null +++ b/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_6o4.sh @@ -0,0 +1,19 @@ +#!/usr/bin/env bash + +# +# Test for VPP LISP RTR functionality (6over4). +# +# IMPORTANT: This test needs to have ODL running with following config +# line in etc/custom.properties: +# lisp.elpPolicy = replace +# +# This test configures a topology of two XTRs and RTR. An ICMP request is +# sent from host1 behind first TR to the host2 behind the second TR. +# + +VPP_LITE_CONF=`pwd`"/../configs/vpp_lite_config/rtr_single_iface/6o4/" +ODL_CONFIG_DIR=`pwd`"/../configs/odl/rtr_single_iface/6o4" + +source test_driver/rtr_single_iface.sh + +test_rtr_single_iface ping6 "6:0:4::4" diff --git a/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_6o6.sh b/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_6o6.sh new file mode 100755 index 0000000..184c4ac --- /dev/null +++ b/tests/data_plane/vpp_lite_topo/test_rtr_single_iface_6o6.sh @@ -0,0 +1,20 @@ +#!/usr/bin/env bash + +# +# Test for VPP LISP RTR functionality (6over6). +# +# IMPORTANT: This test needs to have ODL running with following config +# line in etc/custom.properties: +# lisp.elpPolicy = replace +# +# This test configures a topology of two XTRs and RTR. An ICMP request is +# sent from host1 behind first TR to the host2 behind the second TR. +# Both underlying and overlying networks are IPv6 +# + +VPP_LITE_CONF=`pwd`"/../configs/vpp_lite_config/rtr_single_iface/6o6/" +ODL_CONFIG_DIR=`pwd`"/../configs/odl/rtr_single_iface/6o6" + +source test_driver/rtr_single_iface.sh + +test_rtr_single_iface ping6 "6:0:4::4" diff --git a/tests/data_plane/vpp_lite_topo/topologies/rtr_single_iface.sh b/tests/data_plane/vpp_lite_topo/topologies/rtr_single_iface.sh index 2be2e8c..b6530e7 100644 --- a/tests/data_plane/vpp_lite_topo/topologies/rtr_single_iface.sh +++ b/tests/data_plane/vpp_lite_topo/topologies/rtr_single_iface.sh @@ -3,7 +3,7 @@ function rtr_single_iface_clean { echo "Clearing all VPP instances.." pkill vpp --signal 9 - + rm /dev/shm/* echo "Cleaning RTR topology.." @@ -57,7 +57,9 @@ function rtr_single_iface_setup { bash -c " ip link set dev lo up ip addr add 6.0.2.2/24 dev veth_vpp1 + ip addr add 6:0:2::2/64 dev veth_vpp1 ip route add 6.0.4.0/24 via 6.0.2.1 + ip route add 6:0:4::0/64 via 6:0:2::1 " ip link add veth_vpp2 type veth peer name vpp2 @@ -68,7 +70,9 @@ function rtr_single_iface_setup { bash -c " ip link set dev lo up ip addr add 6.0.4.4/24 dev veth_vpp2 + ip addr add 6:0:4::4/64 dev veth_vpp2 ip route add 6.0.2.0/24 via 6.0.4.1 + ip route add 6:0:2::0/64 via 6:0:4::1 " ip addr add 6.0.3.100/24 dev odl diff --git a/tests/data_plane/vpp_lite_topo/topologies/two_customers_topo.sh b/tests/data_plane/vpp_lite_topo/topologies/two_customers_topo.sh new file mode 100644 index 0000000..2f62913 --- /dev/null +++ b/tests/data_plane/vpp_lite_topo/topologies/two_customers_topo.sh @@ -0,0 +1,128 @@ +#!/usr/bin/env bash + +function two_customers_topo_clean { + echo "Clearing all VPP instances.." + pkill vpp --signal 9 + rm /dev/shm/* + + echo "Cleaning topology.." + ip netns exec intervpp-ns ifconfig vppbr1 down + ip netns exec intervpp-ns brctl delbr vppbr1 + ip link del dev vpp1_cus1 &> /dev/null + ip link del dev vpp2_cus1 &> /dev/null + ip link del dev vpp1_cus2 &> /dev/null + ip link del dev vpp2_cus2 &> /dev/null + ip link del dev intervpp1 &> /dev/null + ip link del dev intervpp2 &> /dev/null + ip link del dev odl &> /dev/null + + ip netns del vpp1-cus1-ns &> /dev/null + ip netns del vpp1-cus2-ns &> /dev/null + ip netns del vpp2-cus1-ns &> /dev/null + ip netns del vpp2-cus2-ns &> /dev/null + ip netns del intervpp-ns &> /dev/null + + odl_clear_all +} + +function two_customers_topo_setup { + echo "Configuring topology..." + ip netns add vpp1-cus1-ns + ip netns add vpp1-cus2-ns + ip netns add vpp2-cus1-ns + ip netns add vpp2-cus2-ns + ip netns add intervpp-ns + + ip link add veth_intervpp1 type veth peer name intervpp1 + ip link add veth_intervpp2 type veth peer name intervpp2 + ip link add veth_odl type veth peer name odl + ip link set dev intervpp1 up + ip link set dev intervpp2 up + ip link set dev odl up + ip link set dev veth_intervpp1 up netns intervpp-ns + ip link set dev veth_intervpp2 up netns intervpp-ns + ip link set dev veth_odl up netns intervpp-ns + + ip netns exec intervpp-ns brctl addbr vppbr1 + ip netns exec intervpp-ns brctl addif vppbr1 veth_intervpp1 + ip netns exec intervpp-ns brctl addif vppbr1 veth_intervpp2 + ip netns exec intervpp-ns brctl addif vppbr1 veth_odl + ip netns exec intervpp-ns ifconfig vppbr1 up + + # customer1 configuration on vpp1 + ip link add veth_vpp1_cus1 type veth peer name vpp1_cus1 + ip link set dev vpp1_cus1 up + ip link set dev veth_vpp1_cus1 up netns vpp1-cus1-ns + + ip netns exec vpp1-cus1-ns \ + bash -c " + ip link set dev lo up + ip addr add 6.0.2.2/24 dev veth_vpp1_cus1 + ip addr add 6:0:2::2/64 dev veth_vpp1_cus1 + ip route add 6.0.4.0/24 via 6.0.2.1 + ip route add 6:0:4::0/64 via 6:0:2::1 + " + + # customer2 configuration on vpp1 + ip link add veth_vpp1_cus2 type veth peer name vpp1_cus2 + ip link set dev vpp1_cus2 up + ip link set dev veth_vpp1_cus2 up netns vpp1-cus2-ns + + ip netns exec vpp1-cus2-ns \ + bash -c " + ip link set dev lo up + ip addr add 6.0.2.2/24 dev veth_vpp1_cus2 + ip addr add 6:0:2::2/64 dev veth_vpp1_cus2 + ip route add 6.0.4.0/24 via 6.0.2.1 + ip route add 6:0:4::0/64 via 6:0:2::1 + " + + # customer1 configuration on vpp2 + ip link add veth_vpp2_cus1 type veth peer name vpp2_cus1 + ip link set dev vpp2_cus1 up + ip link set dev veth_vpp2_cus1 up netns vpp2-cus1-ns + + ip netns exec vpp2-cus1-ns \ + bash -c " + ip link set dev lo up + ip addr add 6.0.4.4/24 dev veth_vpp2_cus1 + ip addr add 6:0:4::4/64 dev veth_vpp2_cus1 + ip route add 6.0.2.0/24 via 6.0.4.1 + ip route add 6:0:2::0/64 via 6:0:4::1 + " + + # customer2 configuration on vpp2 + ip link add veth_vpp2_cus2 type veth peer name vpp2_cus2 + ip link set dev vpp2_cus2 up + ip link set dev veth_vpp2_cus2 up netns vpp2-cus2-ns + + ip netns exec vpp2-cus2-ns \ + bash -c " + ip link set dev lo up + ip addr add 6.0.4.4/24 dev veth_vpp2_cus2 + ip addr add 6:0:4::4/64 dev veth_vpp2_cus2 + ip route add 6.0.2.0/24 via 6.0.4.1 + ip route add 6:0:2::0/64 via 6:0:4::1 + " + + ip addr add 6.0.3.100/24 dev odl + ip addr add 6:0:3::100/64 dev odl + ethtool --offload odl rx off tx off + + ${VPP_LITE_BIN} \ + unix { log /tmp/vpp1.log cli-listen \ + localhost:5002 full-coredump \ + exec ${VPP_LITE_CONF}/vpp1.config } \ + api-trace { on } api-segment { prefix xtr1 } + + ${VPP_LITE_BIN} \ + unix { log /tmp/vpp2.log cli-listen \ + localhost:5003 full-coredump \ + exec ${VPP_LITE_CONF}/vpp2.config } \ + api-trace { on } api-segment { prefix xtr2 } + + post_curl "add-mapping" ${ODL_CONFIG_FILE1} + post_curl "add-mapping" ${ODL_CONFIG_FILE2} + post_curl "add-mapping" ${ODL_CONFIG_FILE3} + post_curl "add-mapping" ${ODL_CONFIG_FILE4} +} |