diff options
Diffstat (limited to 'src/plugins/yang/openconfig/openconfig-wifi-phy.yang')
| -rw-r--r-- | src/plugins/yang/openconfig/openconfig-wifi-phy.yang | 393 |
1 files changed, 0 insertions, 393 deletions
diff --git a/src/plugins/yang/openconfig/openconfig-wifi-phy.yang b/src/plugins/yang/openconfig/openconfig-wifi-phy.yang deleted file mode 100644 index 7c4453c..0000000 --- a/src/plugins/yang/openconfig/openconfig-wifi-phy.yang +++ /dev/null @@ -1,393 +0,0 @@ -module openconfig-wifi-phy { - - yang-version "1"; - - // namespace - namespace "http://openconfig.net/yang/wifi/phy"; - - // Assign this module a prefix to be used by other modules, when imported. - prefix "oc-wifi-phy"; - - // Imports - import openconfig-yang-types { prefix oc-yang; } - // OC-specific types - import openconfig-extensions { prefix oc-ext; } - import openconfig-types { prefix oc-types; } - import openconfig-wifi-types { prefix oc-wifi-types; } - - // Some required meta - organization "OpenConfig working group"; - - contact - "OpenConfig working group - www.openconfig.net"; - - description - "Model for managing PHY layer configuration of Radio interfaces."; - - oc-ext:openconfig-version "0.2.0"; - - revision "2017-12-21" { - description - "Add last-seen to neighbor-table."; - reference "0.2.0"; - } - - revision "2017-11-06" { - description - "Add SSID to neighbor-table."; - reference "0.1.1"; - } - - revision "2017-07-25" { - description - "Initial revision."; - reference "0.1.0"; - } - - // Grouping statements - grouping radio-common-config { - description - "Configuration items common to all Radio interfaces, independent - of frequency"; - - leaf id { - type uint8; - description - "Unique ID of the radio."; - } - - leaf operating-frequency { - type identityref { - base oc-wifi-types:OPERATING_FREQUENCY; - } - description - "Operating frequency of this radio."; - } - - leaf enabled { - type boolean; - default "true"; - description - "The desired operational state (up/down) of this radio interface."; - } - - leaf transmit-power { - type uint8; - units dBm; - default 9; - description - "Transmit power of the radio, in dBm."; - } - - leaf channel { - type uint8 { - range "1..165"; - } - description - "Operating channel of this radio. If using channel-bonding this - will represent the Primary 20MHz channel of the 40,80,160MHz channel."; - } - - leaf channel-width { - type uint8; - units MHz; - default 20; - description - "Operating channel-width of this radio."; - } - - leaf dca { - type boolean; - default "true"; - description - "Utilize Dynamic Channel Assignment on this Radio."; - } - - leaf-list allowed-channels { - type oc-wifi-types:channels-type; - description - "Allowed channel list for this Radio to utilize."; - } - - leaf dtp { - type boolean; - default "true"; - description - "Utilize dynamic transmit-power on this Radio."; - } - - leaf dtp-min { - when "../dtp = 'true'"; - type uint8; - default '3'; - description - "Minimum allowed transmit-power on this radio, if utilizing dtp. - Expressed in dBm."; - } - - leaf dtp-max { - when "../dtp = 'true'"; - type uint8; - default '15'; - description - "Maximum allowed transmit-power on this radio, if utilizing dtp. - Expressed in dBm."; - } - - leaf antenna-gain { - type int8; - description - "Antenna gain applied to this Radio; typically used when - external antennae connected."; - } - - leaf scanning { - type boolean; - default "true"; - description - "Whether the radio will perform off-channel scanning, to collect - neighboring RF information."; - } - - leaf scanning-interval { - type uint8; - units seconds; - description - "How often, in seconds, the radio will go off-channel to perform - scanning."; - } - - leaf scanning-dwell-time { - type uint16; - units milliseconds; - description - "Amount of time, in milliseconds, the radio will spend on a - channel during scanning-interval. If a Monitor-mode Radio, it will - cycle through scanning-allowed-channels spending this amount of time - on each."; - } - - leaf scanning-defer-clients { - type uint8; - description - "Do not perform scanning if this amount of Stations are Associated - to the Radio."; - } - - leaf scanning-defer-traffic { - type boolean; - description - "Do not perform scanning if any traffic received from an active Station - in the past 100ms marked as AC_VO or AC_VI."; - } - } - - grouping radio-common-state { - description - "Grouping for defining radio-specific operational state"; - - leaf base-radio-mac { - type oc-yang:mac-address; - description - "Represents the 'burned-in' base-radio MAC - address for the a Radio interface."; - } - - leaf dfs-hit-time { - type oc-types:timeticks64; - description - "Reports the time of the last DFS hit. The value is the timestamp - in seconds relative to the Unix Epoch (Jan 1, 1970 00:00:00 UTC)."; - } - - leaf channel-change-reason { - type identityref { - base oc-wifi-types:CHANGE_REASON_TYPE; - } - description - "When an Access Point changes channels, this will - provide the reason that led to the change."; - } - - leaf total-channel-utilization { - type oc-types:percentage; - description - "Total 802.11 and non-802.11 channel utilization on this Radio. The - total channel utilization should include all time periods the AP - spent actively receiving and transmitting 802.11 frames, and also - include all time spent with clear channel assessment (CCA) in a - busy state"; - } - - leaf rx-dot11-channel-utilization { - type oc-types:percentage; - description - "Received channel-utilization due to 802.11 frames"; - } - - leaf rx-noise-channel-utilization { - type oc-types:percentage; - description - "Received channel-utilization percentage due to Noise."; - } - - leaf tx-dot11-channel-utilization { - type oc-types:percentage; - description - "Transmit channel-utilization percentage."; - } - } - - grouping radio-counters-state { - description - "Radio telemetry statistics."; - container counters { - description - "A collection of radio-related statistics objects."; - - // Rx Counters - leaf failed-fcs-frames { - type oc-yang:counter64; - description - "Number of frames that failed the FCS"; - } - - // Tx Counters - leaf noise-floor { - type int8; - description - "Noise Floor, as measured by this radio."; - } - } - } - - // neighbor BSSID | SSID | RSSI | Channel | Center Channel | Last-seen - grouping neighbor-list-state { - description - "Operational state data relating to neighboring - BSSIDs and their received signal strength."; - leaf bssid { - type oc-yang:mac-address; - description - "Neighboring BSSID."; - } - - leaf ssid { - type string; - description - "The SSID of this neighboring BSSID."; - } - - leaf rssi { - type int8; - description - "The RSSI of this neighboring BSSID."; - } - - leaf channel { - type uint16; - description - "The channel of this neighboring BSSID. This is to utilize 802.11ac - nomenclature. For example, 40MHz channel 36-40 represented as - channel 38. primary-channel used to identify the primary - 20MHz channel of the neighbor."; - } - - leaf primary-channel { - type uint16; - description - "The primary 20MHz channel, if the neighbor is operating on bonded - channel."; - } - - leaf last-seen { - type oc-types:timeticks64; - description - "Reports the time this reading was taken, indicating when this neighbor - was last seen. If a cache is used, it MUST be updated instantly when a - neighbor BSS changes channels, or a new BSS is seen. The value is the - timestamp in seconds relative to the Unix Epoch - (Jan 1, 1970 00:00:00 UTC)."; - } - } - - grouping neighbor-bssid-top { - description - "Top-level grouping for neighbor table - operational state data."; - - container neighbors { - description - "Top-level container for RF neighbors."; - list neighbor { - key "bssid"; - config false; - description - "The mac address, or BSSID, of a neighbor, and - their corresponding RSSI."; - - leaf bssid { - type leafref { - path "../state/bssid"; - } - config false; - description "Reference to neighbor bssid."; - } - - container state { - config false; - description - "State container for RF neighbors."; - uses neighbor-list-state; - } - } - } - } - - grouping radio-top { - description - "Top-level grouping for radio configuration and - operational state data"; - - container radios { - description - "Top level container for radios, including configuration - and state data."; - - list radio { - key "id"; - description - "The list of radios on the device."; - - leaf id { - type leafref { - path "../config/id"; - } - description - "References the configured id of the radio"; - } - - container config { - description - "Configurable items at the global, radio interface - level"; - - uses radio-common-config; - } - - container state { - config false; - description - "Operational state data at the global radio level"; - - uses radio-common-config; - uses radio-common-state; - uses radio-counters-state; - } - uses neighbor-bssid-top; - } - } - } - uses radio-top; -} |