diff options
Diffstat (limited to 'src/plugins/yang/openconfig/openconfig-wifi-types.yang')
| -rw-r--r-- | src/plugins/yang/openconfig/openconfig-wifi-types.yang | 295 |
1 files changed, 295 insertions, 0 deletions
diff --git a/src/plugins/yang/openconfig/openconfig-wifi-types.yang b/src/plugins/yang/openconfig/openconfig-wifi-types.yang new file mode 100644 index 0000000..01bf89c --- /dev/null +++ b/src/plugins/yang/openconfig/openconfig-wifi-types.yang @@ -0,0 +1,295 @@ +module openconfig-wifi-types { + + yang-version "1"; + + // namespace + namespace "http://openconfig.net/yang/wifi/types"; + + // Assign this module a prefix to be used by other modules, when imported. + prefix "oc-wifi-types"; + + import openconfig-extensions { prefix oc-ext; } + + // Some required meta + organization "OpenConfig working group"; + + contact + "OpenConfig working group + www.openconfig.net"; + + description + "This module contains a set of WiFi-specific type definitions + that are used in the openconfig-wifi modules. It can be + imported by any module to make use of these types."; + + oc-ext:openconfig-version "0.1.0"; + + revision "2017-07-25" { + description + "Initial revision"; + reference "0.1.0"; + } + + //typdef statements + typedef channels-type { + type uint8 { + range "1..14 | 36 | 40 | 44| 48 | 52 | 56 | 60 | 64 | 100 | 104 | 108 | 112 | 116 | 120 | 124 | 128 | 132 | 136 | 140 | 144 | 149 | 153 | 157 | 161 | 165"; + } + description + "Type to specify all the WiFi channels available for use. This is + a superset of what may be allowed by any one particular regulatory + domain."; + } + + // identity statements + identity CLIENT_STATE { + description + "Base type to specify the current state of a Client."; + } + + identity ASSOCIATED { + base CLIENT_STATE; + description + "Client has finished 802.11 Association phase. This implies 'Open' system, + or 802.11 Authentication complete."; + } + + identity L2AUTH_REQD { + base CLIENT_STATE; + description + "Client has Assocated, but not L2 Authenticated (e.g. 802.1X)"; + } + + identity L3AUTH_REQD { + base CLIENT_STATE; + description + "Client has Assocated, but not L3 Authenticated (e.g. Captive Portal)"; + } + + identity DHCP_REQD { + base CLIENT_STATE; + description + "Client has Associated & Authenticated, but has not obtained IP address."; + } + + identity AUTHENTICATED { + base CLIENT_STATE; + description + "Client has fully Authenticated & permitted to access network resources."; + } + + identity L2AUTH_FAILURE_REJECT { + base CLIENT_STATE; + description + "L2 failure, due to RADIUS Access-Reject."; + } + + identity L2AUTH_FAILURE_TIMEOUT { + base CLIENT_STATE; + description + "L2 failure, due to RADIUS timeout."; + } + + identity L3AUTH_FAILURE { + base CLIENT_STATE; + description + "L3 failure. Could be incorrect CP credentials or higher layer + Captive Portal issues."; + } + + identity DHCP_FAILURE { + base CLIENT_STATE; + description + "Client has Associated & Authenticated but has failed to recieve an IP + address, utilizing DHCP."; + } + + identity POWERSAVE { + base CLIENT_STATE; + description + "AP has recieved a PS frame, indicating the client is currently in a + powersave state."; + } + + identity BLACKLISTED { + base CLIENT_STATE; + description + "This client has been blacklisted, through either L2 (MAC) or higher-level + (signature) mechanisms."; + } + + identity AP_STATE { + description "The Up/Down state of an AP."; + } + + identity UP { + base AP_STATE; + description + "The AP is in the up state."; + } + + identity DOWN { + base AP_STATE; + description + "The AP is in the down state."; + } + + identity UPGRADING { + base AP_STATE; + description + "The AP is in the Downgrading firmware state."; + } + + // Possible basic-rates are: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 // + identity DATA_RATE { + description "base type to specify available Data-rates."; + } + + identity RATE_1MB { + base DATA_RATE; + description "1 Mbps DSSS PHY"; + } + + identity RATE_2MB { + base DATA_RATE; + description "2 Mbps DSSS PHY"; + } + + identity RATE_5.5MB { + base DATA_RATE; + description "5.5 Mbps DSSS PHY"; + } + + identity RATE_6MB { + base DATA_RATE; + description "6 Mbps OFDM PHY"; + } + + identity RATE_9MB { + base DATA_RATE; + description "9 Mbps OFDM PHY"; + } + + identity RATE_11MB { + base DATA_RATE; + description "11 Mbps DSSS PHY"; + } + + identity RATE_12MB { + base DATA_RATE; + description "12 Mbps OFDM PHY"; + } + + identity RATE_18MB { + base DATA_RATE; + description "18 Mbps OFDM PHY"; + } + + identity RATE_24MB { + base DATA_RATE; + description "24 Mbps OFDM PHY"; + } + + identity RATE_36MB { + base DATA_RATE; + description "36 Mbps OFDM PHY"; + } + + identity RATE_48MB { + base DATA_RATE; + description "48 Mbps OFDM PHY"; + } + + identity RATE_54MB { + base DATA_RATE; + description "54 Mbps OFDM PHY"; + } + + identity OPERATING_FREQUENCY { + description "Operating frequency of a Radio or SSID."; + } + + identity FREQ_2GHZ { + base OPERATING_FREQUENCY; + description "The Radio or SSID will operate at 2.4GHz only."; + } + + identity FREQ_5GHZ { + base OPERATING_FREQUENCY; + description "The Radio or SSID will operate at 5GHz only."; + } + + identity FREQ_2_5_GHZ { + base OPERATING_FREQUENCY; + description + "The Radio or SSID will be dual-band; operating in + both 2.4 & 5GHz frequencies. + + Dual-band Radio typically refers to a Monitor-mode radio, hopping + between frequencies, dwelling for a configurable amount of time on + each frequency."; + } + + identity CLIENT_CAPABILITIES { + description + "Client capabilities, as reported by Assoc. Req. or + Probe Req. frames."; + } + + identity MU_BEAMFORMER { + base CLIENT_CAPABILITIES; + description "Whether this STA can MU-MIMO Beamform."; + } + + identity MU_BEAMFORMEE { + base CLIENT_CAPABILITIES; + description "Whether this STA can Rx MU-MIMO Beamformed frames."; + } + + identity DOT_11R { + base CLIENT_CAPABILITIES; + description + "Whether this STA supports 802.11r. Note, must be + enabled on BSS for this to be accurate."; + } + + identity DOT_11V { + base CLIENT_CAPABILITIES; + description + "Whether this STA supports 802.11v BSS Transition. Note, must + be enabled on BSS for this to be accurate; unless Probe Req. + are observied in addition to Assoc. Req."; + } + + identity CHANGE_REASON_TYPE { + description + "Base type to specify the reason an Access Point + has changed channels."; + } + identity DFS { + base CHANGE_REASON_TYPE; + description + "DFS hit occured."; + } + + identity NOISE { + base CHANGE_REASON_TYPE; + description + "Excessive amounts of non-802.11 Noise occured."; + } + + identity ERRORS { + base CHANGE_REASON_TYPE; + description + "Excessive reception of frames which + failed the FCS occured."; + } + + identity BETTER-CHANNEL { + base CHANGE_REASON_TYPE; + description + "A less utilized channel exists. eg CCI avoidance + led to this channel-change."; + } + // Extend channel-change reasons here, when applicable. +}
\ No newline at end of file |