diff options
Diffstat (limited to 'scripts/automation/regression/setups/trex25/config.yaml')
| -rw-r--r-- | scripts/automation/regression/setups/trex25/config.yaml | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/scripts/automation/regression/setups/trex25/config.yaml b/scripts/automation/regression/setups/trex25/config.yaml new file mode 100644 index 00000000..821208a5 --- /dev/null +++ b/scripts/automation/regression/setups/trex25/config.yaml @@ -0,0 +1,93 @@ +################################################################ +#### T-Rex nightly test configuration file #### +################################################################ + + +### T-Rex configuration: +# hostname - can be DNS name or IP for the TRex machine for ssh to the box +# is_dual - should the TRex inject with -p ? +# version_path - path to the t-rex version and executable +# cores - how many cores should be used +# latency - rate of latency packets injected by the TRex +# modes - list of modes (tagging) of this setup (loopback, virtual etc.) +# * loopback - Trex works via loopback. Router and TFTP configurations may be skipped. +# * VM - Virtual OS (accept low CPU utilization in tests, latency can get spikes) +# * virt_nics - NICs are virtual (VMXNET3 etc.) + +### Router configuration: +# hostname - the router hostname as apears in ______# cli prefix +# ip_address - the router's ip that can be used to communicate with +# image - the desired imaged wished to be loaded as the router's running config +# line_password - router password when access via Telent +# en_password - router password when changing to "enable" mode +# interfaces - an array of client-server pairs, representing the interfaces configurations of the router +# configurations - an array of configurations that could possibly loaded into the router during the test. +# The "clean" configuration is a mandatory configuration the router will load with to run the basic test bench + +### TFTP configuration: +# hostname - the tftp hostname +# ip_address - the tftp's ip address +# images_path - the tftp's relative path in which the router's images are located + +### Test_misc configuration: +# expected_bw - the "golden" bandwidth (in Gbps) results planned on receiving from the test + +trex: + hostname : csi-trex-25 + cores : 2 + modes : ['1G'] + +router: + model : ASR1004(RP2) + hostname : csi-mcp-asr1k-4ru-12 + ip_address : 10.56.217.181 + image : asr1000rp2-adventerprisek9.BLD_V151_1_S_XE32_THROTTLE_LATEST_20100926_034325_2.bin + line_password : cisco + en_password : cisco + mgmt_interface : GigabitEthernet0/0/0 + clean_config : clean_config.cfg + intf_masking : 255.255.255.0 + ipv6_mask : 64 + interfaces : + - client : + name : GigabitEthernet0/1/0 + src_mac_addr : 0000.0001.0000 + dest_mac_addr : 0000.0001.0000 + server : + name : GigabitEthernet0/1/1 + src_mac_addr : 0000.0001.0000 + dest_mac_addr : 0000.0001.0000 + vrf_name : + - client : + name : GigabitEthernet0/1/2 + src_mac_addr : 0000.0001.0000 + dest_mac_addr : 0000.0001.0000 + server : + name : GigabitEthernet0/1/4 + src_mac_addr : 0000.0001.0000 + dest_mac_addr : 0000.0001.0000 + vrf_name : + - client : + name : GigabitEthernet0/1/5 + src_mac_addr : 0000.0001.0000 + dest_mac_addr : 0000.0001.0000 + server : + name : GigabitEthernet0/1/3 + src_mac_addr : 0000.0001.0000 + dest_mac_addr : 0000.0001.0000 + vrf_name : + - client : + name : GigabitEthernet0/1/6 + src_mac_addr : 0000.0001.0000 + dest_mac_addr : 0000.0001.0000 + server : + name : GigabitEthernet0/1/7 + src_mac_addr : 0000.0001.0000 + dest_mac_addr : 0000.0001.0000 + vrf_name : + +tftp: + hostname : ats-asr-srv-1 + ip_address : 10.56.128.23 + root_dir : /auto/avc-devtest/ + images_path : /images/1RU/ |