diff options
Diffstat (limited to 'src/dpdk_lib18/librte_pmd_ixgbe/ixgbe_bypass.c')
| -rwxr-xr-x | src/dpdk_lib18/librte_pmd_ixgbe/ixgbe_bypass.c | 414 |
1 files changed, 414 insertions, 0 deletions
diff --git a/src/dpdk_lib18/librte_pmd_ixgbe/ixgbe_bypass.c b/src/dpdk_lib18/librte_pmd_ixgbe/ixgbe_bypass.c new file mode 100755 index 00000000..832f4156 --- /dev/null +++ b/src/dpdk_lib18/librte_pmd_ixgbe/ixgbe_bypass.c @@ -0,0 +1,414 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <time.h> +#include <rte_atomic.h> +#include <rte_ethdev.h> +#include "ixgbe_ethdev.h" +#include "ixgbe_bypass_api.h" + +#define BYPASS_STATUS_OFF_MASK 3 + +/* Macros to check for invlaid function pointers. */ +#define FUNC_PTR_OR_ERR_RET(func, retval) do { \ + if ((func) == NULL) { \ + PMD_DRV_LOG(ERR, "%s:%d function not supported", \ + __func__, __LINE__); \ + return retval; \ + } \ +} while(0) + +#define FUNC_PTR_OR_RET(func) do { \ + if ((func) == NULL) { \ + PMD_DRV_LOG(ERR, "%s:%d function not supported", \ + __func__, __LINE__); \ + return; \ + } \ +} while(0) + + +/** + * ixgbe_bypass_set_time - Set bypass FW time epoc. + * + * @hw: pointer to hardware structure + * + * This function with sync the FW date stamp with that of the + * system clock. + **/ +static void +ixgbe_bypass_set_time(struct ixgbe_adapter *adapter) +{ + u32 mask, value; + u32 sec; + struct ixgbe_hw *hw = &adapter->hw; + + sec = 0; + + /* + * Send the FW our current time and turn on time_valid and + * timer_reset bits. + */ + mask = BYPASS_CTL1_TIME_M | + BYPASS_CTL1_VALID_M | + BYPASS_CTL1_OFFTRST_M; + value = (sec & BYPASS_CTL1_TIME_M) | + BYPASS_CTL1_VALID | + BYPASS_CTL1_OFFTRST; + + FUNC_PTR_OR_RET(adapter->bps.ops.bypass_set); + + /* Store FW reset time (in seconds from epoch). */ + adapter->bps.reset_tm = time(NULL); + + /* reset FW timer. */ + adapter->bps.ops.bypass_set(hw, BYPASS_PAGE_CTL1, mask, value); +} + +/** + * ixgbe_bypass_init - Make some environment changes for bypass + * + * @adapter: pointer to ixgbe_adapter structure for access to state bits + * + * This function collects all the modifications needed by the bypass + * driver. + **/ +void +ixgbe_bypass_init(struct rte_eth_dev *dev) +{ + struct ixgbe_adapter *adapter; + struct ixgbe_hw *hw; + + adapter = IXGBE_DEV_TO_ADPATER(dev); + hw = &adapter->hw; + + /* Only allow BYPASS ops on the first port */ + if (hw->device_id != IXGBE_DEV_ID_82599_BYPASS || + hw->bus.func != 0) { + PMD_DRV_LOG(ERR, "bypass function is not supported on that device"); + return; + } + + /* set bypass ops. */ + adapter->bps.ops.bypass_rw = &ixgbe_bypass_rw_generic; + adapter->bps.ops.bypass_valid_rd = &ixgbe_bypass_valid_rd_generic; + adapter->bps.ops.bypass_set = &ixgbe_bypass_set_generic; + adapter->bps.ops.bypass_rd_eep = &ixgbe_bypass_rd_eep_generic; + + /* set the time for logging. */ + ixgbe_bypass_set_time(adapter); + + /* Don't have the SDP to the laser */ + hw->mac.ops.disable_tx_laser = NULL; + hw->mac.ops.enable_tx_laser = NULL; + hw->mac.ops.flap_tx_laser = NULL; +} + +s32 +ixgbe_bypass_state_show(struct rte_eth_dev *dev, u32 *state) +{ + struct ixgbe_hw *hw; + s32 ret_val; + u32 cmd; + u32 by_ctl = 0; + struct ixgbe_adapter *adapter = IXGBE_DEV_TO_ADPATER(dev); + + hw = &adapter->hw; + FUNC_PTR_OR_ERR_RET(adapter->bps.ops.bypass_rw, -ENOTSUP); + + cmd = BYPASS_PAGE_CTL0; + ret_val = adapter->bps.ops.bypass_rw(hw, cmd, &by_ctl); + + /* Assume bypass_rw didn't error out, if it did state will + * be ignored anyway. + */ + *state = (by_ctl >> BYPASS_STATUS_OFF_SHIFT) & BYPASS_STATUS_OFF_MASK; + + return (ret_val); +} + + +s32 +ixgbe_bypass_state_store(struct rte_eth_dev *dev, u32 *new_state) +{ + struct ixgbe_adapter *adapter = IXGBE_DEV_TO_ADPATER(dev); + struct ixgbe_hw *hw; + s32 ret_val; + + hw = &adapter->hw; + FUNC_PTR_OR_ERR_RET(adapter->bps.ops.bypass_set, -ENOTSUP); + + /* Set the new state */ + ret_val = adapter->bps.ops.bypass_set(hw, BYPASS_PAGE_CTL0, + BYPASS_MODE_OFF_M, *new_state); + if (ret_val) + goto exit; + + /* Set AUTO back on so FW can receive events */ + ret_val = adapter->bps.ops.bypass_set(hw, BYPASS_PAGE_CTL0, + BYPASS_MODE_OFF_M, BYPASS_AUTO); + +exit: + return ret_val; + +} + +s32 +ixgbe_bypass_event_show(struct rte_eth_dev *dev, u32 event, + u32 *state) +{ + struct ixgbe_hw *hw; + s32 ret_val; + u32 shift; + u32 cmd; + u32 by_ctl = 0; + struct ixgbe_adapter *adapter = IXGBE_DEV_TO_ADPATER(dev); + + hw = &adapter->hw; + FUNC_PTR_OR_ERR_RET(adapter->bps.ops.bypass_rw, -ENOTSUP); + + cmd = BYPASS_PAGE_CTL0; + ret_val = adapter->bps.ops.bypass_rw(hw, cmd, &by_ctl); + + /* Assume bypass_rw didn't error out, if it did event will + * be ignored anyway. + */ + switch (event) { + case BYPASS_EVENT_WDT_TO: + shift = BYPASS_WDTIMEOUT_SHIFT; + break; + case BYPASS_EVENT_MAIN_ON: + shift = BYPASS_MAIN_ON_SHIFT; + break; + case BYPASS_EVENT_MAIN_OFF: + shift = BYPASS_MAIN_OFF_SHIFT; + break; + case BYPASS_EVENT_AUX_ON: + shift = BYPASS_AUX_ON_SHIFT; + break; + case BYPASS_EVENT_AUX_OFF: + shift = BYPASS_AUX_OFF_SHIFT; + break; + default: + return EINVAL; + } + + *state = (by_ctl >> shift) & 0x3; + + return ret_val; +} + +s32 +ixgbe_bypass_event_store(struct rte_eth_dev *dev, u32 event, + u32 state) +{ + struct ixgbe_hw *hw; + u32 status; + u32 off; + s32 ret_val; + struct ixgbe_adapter *adapter = IXGBE_DEV_TO_ADPATER(dev); + + hw = &adapter->hw; + FUNC_PTR_OR_ERR_RET(adapter->bps.ops.bypass_set, -ENOTSUP); + + switch (event) { + case BYPASS_EVENT_WDT_TO: + off = BYPASS_WDTIMEOUT_M; + status = state << BYPASS_WDTIMEOUT_SHIFT; + break; + case BYPASS_EVENT_MAIN_ON: + off = BYPASS_MAIN_ON_M; + status = state << BYPASS_MAIN_ON_SHIFT; + break; + case BYPASS_EVENT_MAIN_OFF: + off = BYPASS_MAIN_OFF_M; + status = state << BYPASS_MAIN_OFF_SHIFT; + break; + case BYPASS_EVENT_AUX_ON: + off = BYPASS_AUX_ON_M; + status = state << BYPASS_AUX_ON_SHIFT; + break; + case BYPASS_EVENT_AUX_OFF: + off = BYPASS_AUX_OFF_M; + status = state << BYPASS_AUX_OFF_SHIFT; + break; + default: + return EINVAL; + } + + ret_val = adapter->bps.ops.bypass_set(hw, BYPASS_PAGE_CTL0, + off, status); + + return ret_val; +} + +s32 +ixgbe_bypass_wd_timeout_store(struct rte_eth_dev *dev, u32 timeout) +{ + struct ixgbe_hw *hw; + u32 status; + u32 mask; + s32 ret_val; + struct ixgbe_adapter *adapter = IXGBE_DEV_TO_ADPATER(dev); + + hw = &adapter->hw; + FUNC_PTR_OR_ERR_RET(adapter->bps.ops.bypass_set, -ENOTSUP); + + /* disable the timer with timeout of zero */ + if (timeout == RTE_BYPASS_TMT_OFF) { + status = 0x0; /* WDG enable off */ + mask = BYPASS_WDT_ENABLE_M; + } else { + /* set time out value */ + mask = BYPASS_WDT_VALUE_M; + + /* enable the timer */ + status = timeout << BYPASS_WDT_TIME_SHIFT; + status |= 0x1 << BYPASS_WDT_ENABLE_SHIFT; + mask |= BYPASS_WDT_ENABLE_M; + } + + ret_val = adapter->bps.ops.bypass_set(hw, BYPASS_PAGE_CTL0, + mask, status); + + return ret_val; +} + +s32 +ixgbe_bypass_ver_show(struct rte_eth_dev *dev, u32 *ver) +{ + struct ixgbe_hw *hw; + u32 cmd; + u32 status; + s32 ret_val; + struct ixgbe_adapter *adapter = IXGBE_DEV_TO_ADPATER(dev); + + hw = &adapter->hw; + FUNC_PTR_OR_ERR_RET(adapter->bps.ops.bypass_rw, -ENOTSUP); + + cmd = BYPASS_PAGE_CTL2 | BYPASS_WE; + cmd |= (BYPASS_EEPROM_VER_ADD << BYPASS_CTL2_OFFSET_SHIFT) & + BYPASS_CTL2_OFFSET_M; + ret_val = adapter->bps.ops.bypass_rw(hw, cmd, &status); + if (ret_val) + goto exit; + + /* wait for the write to stick */ + msleep(100); + + /* Now read the results */ + cmd &= ~BYPASS_WE; + ret_val = adapter->bps.ops.bypass_rw(hw, cmd, &status); + if (ret_val) + goto exit; + + *ver = status & BYPASS_CTL2_DATA_M; /* only one byte of date */ + +exit: + return ret_val; +} + +s32 +ixgbe_bypass_wd_timeout_show(struct rte_eth_dev *dev, u32 *wd_timeout) +{ + struct ixgbe_hw *hw; + u32 by_ctl = 0; + u32 cmd; + u32 wdg; + s32 ret_val; + struct ixgbe_adapter *adapter = IXGBE_DEV_TO_ADPATER(dev); + + hw = &adapter->hw; + FUNC_PTR_OR_ERR_RET(adapter->bps.ops.bypass_rw, -ENOTSUP); + + cmd = BYPASS_PAGE_CTL0; + ret_val = adapter->bps.ops.bypass_rw(hw, cmd, &by_ctl); + + wdg = by_ctl & BYPASS_WDT_ENABLE_M; + if (!wdg) + *wd_timeout = RTE_BYPASS_TMT_OFF; + else + *wd_timeout = (by_ctl >> BYPASS_WDT_TIME_SHIFT) & + BYPASS_WDT_MASK; + + return ret_val; +} + +s32 +ixgbe_bypass_wd_reset(struct rte_eth_dev *dev) +{ + u32 cmd; + u32 status; + u32 sec; + u32 count = 0; + s32 ret_val; + struct ixgbe_hw *hw; + struct ixgbe_adapter *adapter = IXGBE_DEV_TO_ADPATER(dev); + + hw = &adapter->hw; + + FUNC_PTR_OR_ERR_RET(adapter->bps.ops.bypass_rw, -ENOTSUP); + FUNC_PTR_OR_ERR_RET(adapter->bps.ops.bypass_valid_rd, -ENOTSUP); + + /* Use the lower level bit-bang functions since we don't need + * to read the register first to get it's current state as we + * are setting every thing in this write. + */ + /* Set up WD pet */ + cmd = BYPASS_PAGE_CTL1 | BYPASS_WE | BYPASS_CTL1_WDT_PET; + + /* Resync the FW time while writing to CTL1 anyway */ + adapter->bps.reset_tm = time(NULL); + sec = 0; + + cmd |= (sec & BYPASS_CTL1_TIME_M) | BYPASS_CTL1_VALID; + + /* reset FW timer offset since we are resetting the clock */ + cmd |= BYPASS_CTL1_OFFTRST; + + ret_val = adapter->bps.ops.bypass_rw(hw, cmd, &status); + + /* Read until it matches what we wrote, or we time out */ + do { + if (count++ > 10) { + ret_val = IXGBE_BYPASS_FW_WRITE_FAILURE; + break; + } + + if (adapter->bps.ops.bypass_rw(hw, BYPASS_PAGE_CTL1, &status)) { + ret_val = IXGBE_ERR_INVALID_ARGUMENT; + break; + } + } while (!adapter->bps.ops.bypass_valid_rd(cmd, status)); + + return ret_val; +} |